Purpose: A novel coronavirus, SARS-CoV-2 was identified as the cause of COVID-19 eventually led to the declaration of Public health emergency of international concern and a pandemic by WHO due to its exponential global spread. Present study was conducted to investigate the impact of second wave of pandemic on mental wellbeing and social behaviors among university students of Pakistan during this crucial period of COVID-19 infection. Methods: A cross-sectional analytical study was designed to evaluate the psychosocial impact during the current COVID-19 outbreak among the students of The Islamia University of Bahawalpur, Pakistan. Snowball sampling or chain referral sampling procedure was adopted to recruit the participants in the study. Verbal informed consent was taken from all participants before recruitment in the study irrespective of their gender, age and socioeconomic status. Results: Mental health of university students during COVID-19 epidemic was affected to a varying degree revealing that 26.66% were recorded to have mild, 27.15% moderate and 17.04% suffering from severe anxiety out of total 1029 students. Students who were residing in urban areas with parents and having a steady family income were negatively associated and found protective factors against anxiety. However, having a relative or an acquaintance infected with COVID-19 was an independent risk factor for experienced anxiety. Positively associated factors with the level of anxiety symptoms included economic stressors, effects on daily-life, and academic delays whereas social support was negatively correlated with anxiety in COVID-19 related stressors. Conclusion: Public health emergencies and such pandemic are exerting serious psychological impacts on university students. It is recommended that the higher authorities should plan better policies to reduce this impact for the provision of high quality and timely crisis-oriented psychological services to university students.

The vehicular technology has integrated many features in the system, which enhances the safety and comfort of the user. Among these features, heating, ventilation, and air conditioning (HVAC) is the only feature that maintains the set cabin air temperature (CAT). The user’s command drives the set CAT, and the thermostat provides feedback to the HVAC to maintain the set CAT. The CAT is increased by extracting the heat from the engine surface produced by the fuel combustion, whereas the CAT is reduced by the known processes of the air conditioning system (ACS). Therefore, the CAT driven by the user’s command may not be optimal, and estimating the optimal CAT is still unsolved. In this work, the user was allowed to input a range for CAT instead of a single value. Optimal HVAC criteria were defined, and the CAT was estimated by performing iterative analysis in the user-selected range satisfying the criteria. The HVAC criteria were defined based on two measurable parameters: air conditioning refrigerant fluid pressure (ACRFP) and engine surface temperature (EST) empirically defined as the vector CATOP. In this article, a NARX DL model by mapping the vehicle-level vectors (VLV) to predict the CATOP in real-time using field data obtained from a 2020 Cadillac CT5 test vehicle. Utilising the DL model, CATOP for future time steps were predicted by varying the CAT in the definite range and applying HVAC criteria. Thus, an optimal set CAT was estimated, corresponding to the optimal CATOP defined by the HVAC criteria. We performed the validation of the DL model for multiple datasets using traditional statistical techniques, namely, signal-to-noise ratio (SNR) values, first-order derivatives (FOD), and root-mean-square error (RMSE).

The ACC feature when activated augments the engine performance in real-time. This article presents a novel methodology to predict the optimal adaptive cruise control set speed profile (ACCSSP) by considering all the effecting parameters. This paper investigates engine operating conditions (EOC) criteria to develop a predictive model of ACCSSP in real-time. We developed a deep learning (DL) model using the NARX method to predict engine operating point (EOP) mapping the vehicle-level vectors (VLV). We used real-world field data obtained from Cadillac test vehicles driven by activating the ACC feature for developing the DL model. We used a realistic set of assumptions to estimate the VLV for the future time steps for the range of allowable speed values and applied them at the input of the developed DL model to generate multiple sets of EOP’s. We imposed the defined EOC criteria on these EOPs, and the top three modes of speeds satisfying all the requirements are derived for each second. Thus three eligible speed values are estimated for each second, and an additional criterion is defined to generate a unique ACCSSP for future time steps. Performance comparison between predicted and constant ACCSSPs indicates that the predictive model outperforms constant ACCSSP.

Over the years, researchers have been developing different ventilation strategies as a potential solution for controlling infectious airborne transmissions in healthcare facilities. The effects of ventilation systems on airflow characteristics have been extensively discussed among researchers since SARS-CoV-2 outbreak in 2019. Based on a bibliometric study of 154 publications from 1970 to 2021 retrieved from the Web of Science (WoS) database, this paper examines the research landscape on the effects of ventilation strategies on airflow analysis in healthcare facilities. Results show that China is the most productive country due to its significant contributions to the top prolific authors and funding agencies, which have promoted the research development of the topic. Several research hotspots were identified through keyword co-occurrence analysis. Cluster 1 highlights the ventilation studies involving ventilation layouts and ventilation rates in healthcare facilities. Cluster 2 underlines the computational analysis of ventilation performance for reducing the exposure risk of occupants, which promotes the development of infection control measures. Cluster 3 strengthens the knowledge of the emission and dispersion characteristics of respiratory droplets in healthcare facilities. Overall, this paper highlights the future direction of the current research field other than identifying strategic collaborators and suitable publication outlets for interested researchers.

Microorganisms present in fermented foods and beverages play a vital role in enhancing both nutritive and non-nutritive components. During the fermentation, microorganisms can either naturally occur in the food through spontaneous fermentation or be intentionally added as starter cultures with a variety of species and strains. In this review, the focus is placed on micronutrients, such as vitamins and minerals, and three major macromolecules – prebiotics, bioactive peptides, and functional fatty acids. During fermentation, non-digestible carbohydrates like fructooligosaccharides and galactooligosaccharides are synthesized, imparting prebiotic properties that support gut health. Enzymatic hydrolysis of proteins by microorganisms yields bioactive peptides with diverse health benefits. Furthermore, fermentation facilitates the formation of fatty acids, including short-chain fatty acids and conjugated linoleic acid, potentially exerting physiological effects. By harnessing the power of microbial fermentation, nutrient-rich and bioactive compounds can be enhanced, offering a promising approach to address global malnutrition concerns.

Thalassemia is genetic blood disease cause by absence or decrease of one or more of the globin chain synthesis. Beta thalassemia is characterized by one or more mutations in beta globin gene. Absence or reduced amount the of beta globin chains cause ineffective erythropoiesis which leads to anemia. Beta thalassemia has been further divided into three main forms: Thalassemia minor/silent carrier, major and intermedia. More severe form is thalassemia major in which patients depend upon blood transfusion for survival and high level of iron occur as a consequence of consistent blood transfusion. Over loaded iron invokes the synthesis of reactive oxygen species that are toxic in redundancy and triggering the impairment to vascular, endocrine and hepatic system. Thalassemia can be diagnosed and detected through various laboratory tests such as blood smear, prenatal testing (genetic testing of amniotic fluid), DNA analysis (genetic testing) and complete blood count. Treatment of thalassemia intermedia is symptomatic but it can also be managed by splenectomy and folic supplementation. While thalassemia major can be treated by transplantation of bone marrow, regular transfusion of blood and iron chelation treatment, stimulation of fetal hemoglobin production, hematopoietic stem cell transplantation and gene therapy.

COVID-19 infection is extremely dangerous for persons with comorbidities such as kidney disease and diabetes. Although many people of all ages and socioeconomic backgrounds have suffered due to this pandemic, those with underlying medical conditions like kidney disease and diabetes are more vulnerable to becoming infected with COVID-19 related to weak immunity. However, the role of vaccination in the co-infection of COVID-19 with diabetics is not available in the literature. Therefore, we examine the unique challenges presented by the co-infection of COVID-19 in individuals with diabetes, focusing on its disease transmission dynamics. A mathematical modelling technique is to be employed in this work to analyse the dynamics of COVID-19 outbreaks with seven compartments, including vaccination with comorbidities such as diabetes. We also investigated analytically by displaying the solutions' existence, boundedness, positivity and sensitivity. After calculating the basic reproduction numbers, the stability analysis of model equilibrium points is also covered. If the reproduction numbers are less than unity, the disease-free equilibrium points of the model appear to be both locally and globally stable. The findings of this study are that as the vaccination rate rises, the incidence of COVID-19 and its co-infections with diabetes decreases. Effective disease treatment strategies may be based partly on the possible impact of vaccination on the co-infection of COVID-19 related to diabetic disease insights.

The 21st century, where all things are depending upon technology, almost all the human tasks are being done with the help of technology to save a lot of time and make our life much more comfortable. The monitoring of students’ attendance is a crucial task for faculty in today’s world. There are more chances of errors while entering the students’ attendance records in the primary system, primarily when the class was over. The main concern of this study is to build an IoT-based automated attendance management system for educational institutes by biometric recognition to incorporate fake/proxy attendance and errors of entry and to replace old manual methods of taking students’ attendance by calling their names or roll numbers. The AAS will click the image of the classroom, and it will automatically detect the faces of students sitting in the lecture room and recognize them during lectures then mark their attendance daily to keep a record of their presence and also maintain and manage it for the management staff of the institution for future by using web services.

Pine nuts are non-wood forest products (NWFP) with constantly growing market notwithstanding a series of phytosanitary issues and related trade problems. The aim of paper is to review the literature on the relationship between phytosanitary problems and trade development. Production and trade of pine nuts in Mediterranean Europe have been negatively affected by the spreading of Sphaeropsis sapinea (a fungus) associated to an adventive insect Leptoglossus occidentalis (fungal vector), with impacts on forest management activities, production and profitability and thus in value chain organization. Reduced availability of domestic production in markets with growing demand has stimulated the import of pine nuts. China has become a leading exporter of pine nuts, but its export is affected by a symptom associated to the nuts of some pine species: the ‘pine nut syndrome’ (PNS). Most of the studies embraced during the review are associated to PNS occurrence associated to the nuts of Pinus armandii. In the literature review we highlight the need for a comprehensive and interdisciplinary approach to the analysis of the pine nuts value chain organisation, where research on food properties and clinical toxicology be connected to breeding and forest management, forest pathology and entomology and trade development studies.

Solar pavement technology has numerous benefits for advanced life and environmental protection, including reduced fossil fuel usage, reduction harmful emissions from conventional electricity generation and handy reliable electricity via solar energy. This paper aims to find an alternative for cost effective renewable energy sources is in conjunction with the principles of sustainability. This research studies whether the application of thermal energy harvesting road pavement using sustainable conductive piping such as stainless steel, copper, and aluminium are feasible in Malaysia. The scope of the paper is to optimize the suitable parameters for different materials of thermal energy harvester such as pipe material, pipe depth inserted into pavement, types of pipe arrangement, pipe spacing, and flow rate for maximum thermal energy extraction using numerical simulation. The simulation is testing under engineering software ANSYS Workbench 19.2 (Fluent) and Solidworks 2020 to develop project prototype from optimize thermal energy harvester. Thus, serpentine copper pipe shows the highest heat efficiency which is 32.22% with the temperature outlet of 327.35K (54.21°C) at the pipe located at 50 mm from the surface pavement with the pipe spacing of 80 mm centre-to-centre.

This article discusses the impact of new financial technologies, such as Non-Fungible Tokens (NFTs) on traditional industries such as art, sports, and game, while focusing on the recently formed "Metaverse" market. As a component of the overall blockchain ecosystem, the history of the establishment of NFT is analyzed. The impact of Web3 and intelligent contracts on Fintech are also investigated. This study examines the general trends in the NFTs market, including their price formation, price-influencing factors, and available patterns. Then the paper provides classifications and examples of NTFs. Besides, the technological application and primary technical path are also described. Later, the paper assesses the market's and marketplaces' accessibility. Finally, this study evaluates the management applications of NFTs and analyzes existing platforms, and demonstrates how they can be implemented effectively in various settings. The concluding portion discusses technological obstacles. The study concludes with a discussion of potential applications for the results and prospects for future research.

The response of building elements during earthquakes has been an area of concern for different researchers around the world. The NSEs are the first elements to attain failure, the buildings after damages in safety priority are classified as in “Life Safety” mode, but in reality, they are in “Collapse Safety” mode and the occupants inside the buildings are in a state of “Non-Life Safety” as a result of falling of the hazardous NSE’s like cladding's, partitions, hanging objects. In addition to the Life Cycle Cost Assessment (LCCA), the Social Life Cycle Assessment (SLCA) is overlooked by the majority of the researchers, the community must be prepared to respond to an event more efficiently without any major casualties or loss of life. It is expected that by the end of 2050, almost double the construction will take place, the embodied energy during the pre-construction, post-construction and demolition generates a lot of CO2s into the environment, hence sustainability should be given due importance, helping in the achievement of Sustainable Developmental Goals (SDGs).

Breast cancer is the most widespread malignancy in women from corner to corner of the world. Nanostructured lipid carrier (NLC) proved its efficacy in the treatment of cancer. NLC loaded with Imatinib (IMA) (NANIMA) was prepared and evaluated for in vitro efficacy in MCF-7 breast cancer cells. Hot homogenization method was used for the preparation of NANIMAs. Aqueous solution of surfactants (hot) was mixed with molten mixture of stearic acid and sesame oil (hot) under homogenization. The prepared NANIMAs were characterized and evaluated for size, polydispersity index, zeta potential, encapsulation efficiency, release studies, stability studies and MTT assay (cytotoxicity studies). The optimized NANIMA revealed particle size of 104.63 ± 9.55 d.nm, PdI of 0.227 ± 0.06 and EE of 99.79 ± 0.03. All NANIMAs revealed slow and sustained release behaviour. The surfactants used in the preparation of NANIMAs exhibited their effects on particle size, zeta potential, encapsulation efficiency, stability studies and release studies. The cytotoxicity studies unveiled 8.75 times increase in cytotoxicity for optimized NANIMA (IC50 = 6 µM) when compared with IMA alone (IC50 = 52.5 µM) on MCF-7 breast cancer cells. After this, NLC containing IMA possibly will be employed for the cure of breast cancer. A lesser amount of IMA loaded NLC will be sufficient than IMA alone for the treatment of breast cancer. Moreover, the patient will exhibit not as much of adverse effects as in case of IMA alone. Consequently, NANIMA could prove to be useful for effective therapeutic outcome in breast cancer treatment.

Enhancing spectral efficiency, especially in Non-line-of-Sight environments, is emerging as a pivotal necessity when dealing with the evolving landscape of 5G networks and beyond, sur-passing the capabilities of previous 4G systems to achieve a high information rate combined with minimal interference. Contrary to depending on the traditional Orthogonal Multiple Access (OMA) systems to tackle the issues caused by Non-line-of-Sight (NLoS) environments, advanced wireless networks are focusing on adopting innovative models such as Non-Orthogonal Multiple Access (NOMA), MIMO, IRS technology, etc. In this paper, we present technologies that can be integrated with NOMA to enhance communication reliability in environments that suffer from issues such as limited coverage and lower spectral efficiency mainly caused by huge obstacles. Our exploration includes the fundamental concepts of Cooperative NOMA (C-NOMA), Multiple Input Multiple Output (MIMO), Intelligent Reflective Surfaces (IRS), Unmanned Aerial Vehicles (UAVs), and Energy Harvesting (HV), which adds a layer of sophistication, promising not only improved connectivity but also contributing to a more reliable and environmentally friendly data trans-mission landscape.

Underwater imaging presents unique challenges, notably color distortions and reduced contrast due to light attenuation and scattering. Most underwater image enhancement methods, first use linear transformations for color compensation and then enhance the image. We observed that linear transformation for color compensation is not suitable for certain images. For such images, a non-linear mapping is a better choice. Our paper introduces a unique underwater image restoration approach leveraging a streamlined convolutional neural network (CNN) for dynamic weight learning for linear and non-linear mapping. In the first phase, a classifier is applied that classifies the input images into Type-I or Type-II. In the second phase, depending on the classification, the Deep Line Model (DLM) for Type-I images or the Deep Curve Model (DCM) for Type-II images. For mapping an input image to an output image, DML creatively combines color compensation and contrast adjustment in a single step and uses deep lines for transformation, whereas DCM employs higher-order curves. Both models utilize lightweight neural networks that learn per-pixel dynamic weights based on the input image’s characteristics. Comprehensive evaluations on benchmark datasets using metrics like peak signal-to-noise ratio(PSNR) and root mean squares error (RMSE) affirm our method’s effectiveness in accurately restoring underwater images, outperforming existing techniques.

The multidisciplinary nature of the work required for research in the Covid-19 pandemic has created new challenges for health professionals in the battle against the virus. They need to be equipped with novel tools and resources ---that have emerged during the pandemic--- to gain access to breakthrough findings, know the latest developments, and to address their specific needs for rapid data acquisition, analysis, evaluation, and reporting. Because of the complex nature of the virus, the healthcare systems worldwide are severely impacted as the treatment and the vaccine for Covid-19 disease are not yet discovered. This leads to frequent changes in regulations and policies by governments and international organizations. Our analysis suggests that given the abundance of information sources, finding the most suitable tool for a given task is one of such challenges. But health professionals and policymakers need access to the most relevant, reliable, trusted, and latest information and tools that can be used in their day-to-day tasks of Covid-19 research and analysis. In this article, we present our analysis of various novel and important tools that have been specifically developed during the Covid-19 pandemic and that can be used by the health professionals community to help in advancing their analysis and research. These tools comprise of search engines, information repositories for literature and clinical trials, data sources, dashboards, and forecasting models. We present list of the minimally essential tools to serve a multitude of purposes, from hundreds of those developed since the beginning of the pandemic. A critical analysis is provided for the selected tools based on 17 parameters that can be useful for researchers and analysts for their evaluations. These parameters make up our evaluation framework and have not been used previously for analysis and evaluation. Hence, knowledge of the tools will not only increase the productivity but will also allow to explore new dimensions for using existing tools with more control, better management, and greater outcome of their research. In addition, the parameters used in our framework can be applied for future evaluations of similar tools and health professionals can adapt them for evaluation of other tools not covered in this analysis.

Background: This work aimed to undertake a bibliometric analysis of the Rubella virus. Medical studies were conducted between 2000 and 2022 to discover trends, dynamics, and research outputs in the industry. Methods:A bibliometric study was performed using R software to determine research characteristics indexed worldwide and published in Rubella research in medical studies. The Rubella virus was chosen as the subject in the PUBMED database, and 374 papers from the previous two decades were reviewed. Results: There was an increase in the number of publications after 2003. The United States was the most essential countryamong all which had the most contributions on Rubella Virus. Conclusion:Rubella research has increased in the medical profession over the previous decade, with the United States leading to publications in this field.

Robotic path planning and navigation algorithms enable autonomous mobile robots to navigate complex environments. These algorithms allow robots to be deployed in search and rescue missions, where they can locate victims in hazardous areas inaccessible to humans. Additionally, autonomous driving algorithms hold the potential to revolutionize transportation by enabling self-driving cars to navigate roads safely and efficiently. This paper focuses on developing an algorithm for autonomous navigation of the mobile robot (Tortoise bot) using robot operating system (ROS), based on publish-subscribe communication facilitating seamless interaction between various nodes. Tortoise Bot is a differential wheeled robot whose movement is based on two separately driven wheels placed on either side of the robot body. The Raspberry Pi acts as the controller. A 360-degree LiDAR and RGB-D camera are used for creating a 3D map of the environment. Various state-of-the art software tools, such as Gazebo, Ubuntu, MATLAB and RPI imager are used. Initially, a simulation based on simple obstacle avoidance is done using gazebo and MATLAB. Another simulation based on trajectory tracking is implemented using MATLAB to study the kinematic model. Online navigation and path planning are executed with the help of teleoperation and Dynamic Window Approach algorithm. A novel Wander algorithm is created that avoids obstacles on its path. Object recognition is also implemented during autonomous navigation using YOLO.

Cadmium Sulfide nanoparticle (CdS-LA hybrid nanoparticles) was synthesized here by a green approach using the precursor cadmium acetate and sodium sulphide along with the extract of a plant Lathyrus aphaca L. containing the phytochemicals which were responsible for surface modification of nanoparticles. The nanoparticle was used to evaluate their inhibition potential against species of bacteria and fungi. The nanoparticles were characterized by XRD which demonstrates the hexagonal crystal structure. SEM confirms the homogenous surface appearance of the CdS-LA hybrid crystalline structure. EDX analysis confirms surface modification of nanoparticles by phytochemicals. FTIR confirmed the Cd-S linkage laterally with the related functional groups and the presence of metabolites on the surface of nanoparticles. The UV-visible spectroscopy confirmed the peak at the characteristic wavelength range but a slight shift occurred in the peak of the CdS nanoparticles due to the presence of the phytochemicals. This study particularly provides an environment-friendly strategy to synthesize the CdS nanoparticles capped by Lathyrus Aphaca L. extract that are biologically active due to the mediation of the plant extract. CdS-LA hybrid nanoparticles have shown inhibition potential against various species of bacteria and fungi and realize the biological importance of the green synthesis of nanoparticles especially mediated with the plant extract.

The communication link between the base station and the mobile sensor networks, such as multi-agent systems for collaborative tasks which include ground mobile robots and drones, is crucial for localization and success of tasks in indoor environments. The Power-domain Non-Orthogonal Multiple Access (P-NOMA) is an emerging multiplexing technique that enables the base station to accumulate signals for different agents using the same time-frequency channel. The environment information such as distance from the base station is required at the base station to calculate communication channel gains and allocate suitable signal power to each agent. The accurate estimate of the position for power allocation of P-NOMA in a dynamic environment is challenging due to changing location of the end-agent and shadowing. In this paper, we take advantage of the two-way Visible Light Communication (VLC) link to: (1) estimate the position of the end-agent in a real-time indoor environment based on the signal power received at the base station and (2) allocate resources using the Simplified Gain Ratio Power Allocation (S-GRPA) scheme with the look-up table method. In addition, we use the Euclidean Distance Matrix (EDM) to estimate the location of the end-agent whose signal was lost due to shadowing.

Mill scale is the by-product of iron and steel industry. It can be recycled via sinter plant or solid as sinter feed materials. 85 to 90% of the constituent particles are more than 0.008 inches. The iron content is near around 70 %, with a very small amount of alkaline compounds and non-ferrous metals. Mill scale is polluted and contaminated with lubricants, oils and greases from the equipment. In this experiment for recovering of oil from mill scale, it is treated with three different methods. Then all methods were compared according to the ability of oil elimination and iron recovered. After washing and boiling with surfactants, large amount of polluted waste water becomes a problem for environment so this wastewater was utilized for making of Microbial Fuel Cells (MFCs), production of electricity in MFC depends on the biodegradation of organic materials, so different waste were added in wastewater for making MFC. The remaining of MFC was converted in bioethanol, biodiesel and biofertilizer. So this research is economical and environmentally friendly and fulfilled the important aspect of green environment with zero waste. It will be a mile stone in the research of metallurgy, environmental engineering, recycling technology and zero waste management.

Nowadays, more than 180 million people believe that the Holy Qur'an was sent by the Almighty Allah through Prophet Muhammad in 610-632 A.D in Mecca and Medina. However, the word Mecca (Q: 48:24) is mentioned only once in the entire Holy Qur'an, which is not related to the birth of the Prophet or any worship. Conventional Islam is mostly based on the hearsay of some Islamic narrators published in the eighth and ninth centuries. To think deeply and conduct research on the verses of the Holy Quran has been mentioned (special urge) directly and indirectly by this Holy Scripture itself many times but it would not be wrong to say that there is no scholarship on the verses of the Quran based on the research method described in the Holy Quran until the present century. Therefore, this paper has been dared to carry out by combining the methods of research followed in the Holy Quran and the academically accepted research methodology. The analysis shows that the results of almost fourteen hundred years of mythological history of conventional Islamic narrators are opposites. First of all, the proper name of the Prophet revealed by the Holy Quran is Ahmed, but Muhammad is an adjective and there are many such names. Secondly, this prophet was not born in Mecca, KSA, nor in 570/571 A.D, but in the Beqaa Valley of Lebanon, between the third and fourth centuries. Thirdly, the Muslim Hajj (pilgrimage) of Mecca is celebrated entirely according to the Lahwal Hadith (idle tales) (Q: 31:6) in the language of the Holy Quran. Originally the place designated for pilgrimage was in the Beqaa Valley, Lebanon. This article will have a double influence on the Muslim world, that is, Islamic scholars will think again deeply and research new ways of scholarship of the Holy Quran, instead of based on the hearsay of idle tales (Lahwal Hadith). On the contrary, those who are stubborn Islamic narrators, since they have already rejected the Holy Quran, will not hesitate to violently attack the researchers and they will not be positively motivated by this paper. This article specifically urges Islamic scholars to conduct in-depth studies on the most important issues of Islam using the Holy Quranic research method.

The COVID-19 infections in Pakistan are spreading at an exponential rate and a point may soon be reached where rigorous prevention measures would need to be adopted. Mathematical models can help define the scale of an epidemic and the rate at which an infection can spread in a community. I used ARIMA Model, Diffusion Model, SIRD Model and Prophet Model to forecast the magnitude of the COVID-19 pandemic in Pakistan and compared the numbers with the reported cases on the national database. Results depicts that Pakistan could hit peak number of infectious cases between June 2020 and July, 2020.

Aim: Shockwaves have been felt all over the world as a result of war, inflation, food shortages, and the COVID-19 pandemic's long tail. The aim of the study is to correlate present global conflicts, pandemic and socio-economic crises with present healthcare sustainability, identifying possible threats and visualize future global health crises if all these catastrophes persist for long. Materials and Methods: PubMed, ALTAVISTA, Embase, Scopus, Web of Science, and the Cochrane Central Registers were prioritized to collect public health issues. Results: The global economic slowdown, sharp decline in financial asset values, decline in imports and exports, contraction of industrial production, rise in inflation, decrease in wages, rise in unemployment, damage to the social security caused by numerous natural calamities, human displacement due to pandemic and ongoing conflicts tear down not only the economic sector but also the health sector. It is already late for taking corrective measure by the participation every country, community or intelligence. Only healthcare issues, highlighted in this study, if focused in the highest platforms, could compel global leaders to forego conflicts and work together. Conclusion: The global health sector will be collapsed soon, if proper initiatives are not taken right now, which has already been grossly mistreated by the pandemic.

This study aims to focus on using the Volterra series and machine learning for forecasting random and chaotic wind speed regimes, since the calm weather is mostly noticed at the local site, making the dataset selection difficult. A novel method is proposed to predict Volterra kernels up to the third order, using a forward-back propagation neural network with 12-month measurements at Fujairah site (UAE). Both daily and monthly wind speed data sets are investigated for forecasting. The three dominant hourly and daily kernels are extracted for each day and each month. Predicted future Volterra kernels are estimated from past values using both statistical analysis and individual neuro networks for each of the Volterra kernel coefficients. Due to the random nature of wind speed at the local site, a two-layer with 4 neurons per layer neuro network is used to locate the most variable and intense speed during 8-hours in the day. Forecasted wind speed is determined with errors arising from different sources such as the utilization of only 3rd-order Volterra kernels and the difficulty of machine training of the employed shallow network. Nevertheless, this work depicts a useful algorithm to forecast chaotic and random wind speed regimes. Computational time is a trade of the complexity of Volterra mathematical analysis.

The study is an attempt to enquire into the preference of undergraduate students, after a considerable and over a year-long experience with Online Teaching and Learning (OTL), under the emergency preventive measure of switching from the traditional face-to-face classes to online. The study followed an exploratory approach, with a quantitative survey followed by a qualitative one, and a convenient sampling method to collect responses from a substantial sample size. The study is positioned after more than a year of remote classes by the undergraduate student, and hence represents highly experienced reflections and preferences from these students, as compared to other studies conducted last year. The study has profound implications in considering, and questioning, the importance of on-campus classes, and significance of the physical presence of a tutor in the class, and its effect on the learning experience of undergraduate students.

Lithium-ion batteries have gained immense popularity in electric vehicles(EVs) due to their high energy density, offering an extended driving range. This has made them the preferred choice in the automotive industry, driving the shift towards EVs. However, alongside their popularity, safety concerns have arisen. The main issues include the potential for thermal runaway leading to fires or explosions, which can occur due to overcharging, physical damage, or manufacturing defects. While safety features and rigorous testing aim to mitigate these risks, ongoing research and development focus on enhancing safety measures to further ensure the reliability and safety of lithium-ion batteries in EVs. This paper focuses on the development and deployment of a real-time monitoring dashboard for Li-ion battery health monitoring using STM32 Microcontroller within the framework of Industry 4.0. Leveraging advanced sensor technology and data analytics, the dashboard provides continuous, comprehensive insights into battery performance, including state of charge and temperature. Integrating with Industry 4.0 principles, such as IoT, the system enables predictive maintenance, optimizing production processes and ensuring efficient utilization of resources. The implementation showcases the integration of real-time monitoring tools for Li-ion batteries, aligning with the transformative paradigms of Industry 4.0 to enhance operational efficiency and reliability within industrial settings.

COVID-19 has affected 212 countries around the world, killing nearly 300,000 and infecting more than 4.4 million by May 14, 2020. Bangladesh, a South Asian low-middle-income economy, has experienced a demographic and epidemiological transition with rapid urbanization and a gradual increase in life expectancy. It is the seventh most populous country in the world and population of the country is expected to be nearly double by 2050. The increasing burden of communicable diseases in Bangladesh can be attributable to rapid urbanization and nearly 50% of all slum dwellers of the country live in Dhaka division. In 2017, National Rapid Response Team of IEDCR investigated 26 incidents of disease outbreak. The joint survey of the Power and Participation Research Centre and BRAC Institute of Governance and Development reveals that per capita daily income of urban slum and rural poor drops by 80% due to present countrywide shutdown enforced by the government to halt the spread of Covid-19. 40%-50% of these population took loans to meet the daily expenses. However, the country has just 127,000 hospital beds, 91,000 of them in government-run hospitals. Researchers say, the country’s economy is economy is losing BDT 33 billion every day from its service and agriculture sectors during the nationwide shutdown.

This study was designed to assess variation of possible phytochemical compounds in the ethanolic extracts of Gigantochloa scortechinii rhizome. Destructive sampling was done by using selective random sampling method on four consecutive rhizomes from healthy clumps and was conducted at two natural forests and one secondary forest (planted). Homogenized sample were extracted using solvent extraction (70% ethanol) method. Ethanolic extracts of G. scortechinii rhizome were qualitatively analyzed using GC/MS GC2010 Plus, Shimadzu to determine the composition of phytochemical compounds and identified using FFNSC 1.3, NIST11, PMW_tox2, and Wiley229 spectral library. A qualitative variation was observed with a total of 56 compounds were identified and differentiated between study site and rhizome age. Results revealed that G. scortechinii rhizome contains various phytochemical compounds with potential as a plant of phytopharmaceutical importance. This is the first finding on the spatial and age-related effects of phytochemical compounds in a consecutive rhizome and of G. scortechinii rhizome specifically.

In recent years, the production of cement has grown globally in a very rapid manner due to the modernization of the world we live in, and after fossil fuels and land-use change, cement production is the third-largest source of anthropogenic emissions of carbon dioxide, CO₂. Cement being the primary binding material for concrete and with the prospects for the concrete industry continues to grow so will the emissions of CO₂. Hence, a method to reduce the CO₂ production while keeping up with the progression of the concrete industry is very crucial in current times. This is where CO₂ sequestration comes in. It is a process where CO₂ is converted into a mineral which will then be trapped into the concrete forever. Required data to carry out the research between CO₂ sequestered concrete and concrete without CO₂ have been observed, obtained and tabulated as necessary. These data are then used to compare the concrete samples with one another and also prove the theoretical effects of CO₂ exposure to concrete. Hence, experimental results on the compressive strength of the concrete samples for 7, 14 and 28 days has also been tabulated, graphed and further disputed. The objective of this research is mainly to determine the compressive strength of CO₂ sequestered concrete in comparison with concrete without CO₂ in order to decrease the effects the concrete industry has on the environment. The compressive strength of concrete samples with sequestration of CO₂ gas is expected to be higher than of the concrete without CO₂.

Understanding morphological and genetic diversity of forest trees is essential to facilitate their conservation, sustainable management and genetic improvement for addressing the economic and environmental demands and challenges. We have examined variation in morphometric seed and pod traits and seed germination of multipurpose and widely distributed forest tree Albizia lebbek (Indian siris) from 12 provenances covering the species’ range in northern India and its relationships with bioclimatic factors. Highly significant inter-provenance variation was observed in seed size (seed length (SL), seed width (SW), SW/SL, SL×SW), seed mass (1000 seed weight), pod size (pod length (PL), pod width (PW), PW/PL), seed germination, number of seeds per pod, and insect infected seeds (IIS). The provenance effect contributed a major portion to the total phenotypic variance. Morphometric variation in all traits except for IIS was not clinal related to longitude, latitude, altitude or rainfall. There was an indication of the presence of ecotypic variation. IIS showed clinal variation with significant negative correlation with latitude. Most seed size and pod size traits showed positive correlations with several temperature bioclimatic factors and negative correlations with several precipitation bioclimatic factors. Our results have significance for genetic improvement, population genetics and genomics studies and conservation and sustainable management of A. lebbek genetic resources.

Tiger nut (Cyperus esculentus) is an edible perennial grass-like plant that has long been recognized for its health benefits as it is rich in fiber, protein, vitamins, minerals and natural sugars. It can be eaten raw, roasted or made into a refreshing milk which is very nutritive and healthy for consumption. There were several efforts to mass-produce the locally prepared tiger nut milk in our locality, but the fact that it has a shorter shelf-life, brings about a hindrance. The main objective of the present study is to unveil the cause for the easily spoilage of tiger nut milk and device ways to promote its production using different treatments. Tiger nut milk products were prepared using different methods; water soaked tiger nut milk (WSTM), toasted tiger nut milk (TTM), methanol soaked tiger nut milk (MSTM), and the pasteurised tiger nut milk (PTM). Each of these milk proucts prepared was divided into two portions; the first portion is treated with an antibiotic preservative, Nisin and the second portion was left untreated. The two portions were further divided into two; one stored at refrigerating temperature and the other at room temperature, making four different treatments per mixture and a total of 16 samples. These samples were subjected to proximate analysis; protein, fat, moisture, ash and carbohydrate. The chemical composition of the samples was significantly (P < 0.05) affected by processing treatment. All the samples had high moisture content, and a considerable amount of fat. The preservative treated samples that received pasteurized treatment were found to stay more than a week with fair quality. Findings from the study shows that the chemical characteristics of the various milk products were significantly affected by the different processing treatments.

Speech emotion recognition (SER) is a technology that can be applied in distance education to analyze speech patterns and evaluate speakers’ emotional states in real-time. It provides valuable insights and can be used to enhance the learning experience by enabling the assessment of instructors’ emotional stability, a factor that significantly impacts information delivery effectiveness. Students demonstrate different engagement levels during learning activities, and assessing this engagement is an important aspect of controlling the learning process and improving e-learning systems. An important aspect that may influence student engagement is the emotional states of their instructors. Accordingly, this research uses deep learning techniques to create an automated system for recognizing instructors’ emotions in their speech when delivering distance learning. This methodology entails integrating Transformer, convolutional neural network, and long short-term memory architectures into an ensemble to enhance SER. Feature extraction from audio data used Mel-frequency cepstral coefficients, chroma, Mel spectrogram, zero crossing rate, spectral contrast, centroid, bandwidth, roll-off, and root-mean square, with subsequent optimization processes adding noise to, conducting time stretching, and shifting the audio data. Notably, several Transformer blocks were incorporated, and a multi-head self-attention mechanism was employed to identify the relationships between the input sequence segments. The pre-processing and data augmentation methodologies significantly enhanced the precision of the results in that the model achieved accuracy rates of 96.3%, 99.86%, 96.5%, and 85.3% on the Ryerson Audio-Visual Database of Emotional Speech and Song, Berlin Database of Emotional Speech, Surrey Audio-Visual Expressed Emotion, and Interactive Emotional Dyadic Motion Capture datasets. Furthermore, it achieved 83% accuracy on another dataset created for this research—the Saudi Higher Education Instructor Emotions dataset. The results demonstrate this model’s considerable accuracy in detecting emotions in speech data across different languages and datasets.

This panel study investigates the relationship between green logistics indices, economic, environmental, and social factors in the perspective of Asian emerging economies. This study adopted FMOLS and DOLS methods to test research hypothesis, catering the problem of endogenity and serial correlation. The results suggest that logistics operations, particularly LPI2 (efficiency of customs clearance processes), LPI4 (quality of logistics services) and LPI5 (trade and transport-related infrastructure), are positively and significantly correlated with per capita income, manufacturing value added and trade openness. While, greater logistics operations are negatively associated with social and environmental problems including, climate change, global warming, carbon emissions, and poisoning atmosphere. In addition, human health is badly affected by heavy smog, acid rainfall, and water pollution. The findings further extend and reveal that political instability, natural disaster and terrorism are also a primary cause of poor economic growth and environmental sustainability with poor trade and logistics infrastructure. Further, the application of renewable energy resources and green practices can mitigate negative effects on social and environmental sustainability without compromising the performance of economic growth. There is very limited empirical work presented in literature using renewable energy and green ideology to solve macro-level social and environmental problems, while this study will assist the policymakers and researchers to understand the importance of green concept in improving countries’ social, economic and environmental performance.

We do this research to investigate the relationship between renewable energy, public health expenditure, logistics performance indices, and economic and environmental sustainability in the ASEAN member states, through the analysis of a panel data from 2007 to 2017. The study used secondary data, which is downloaded from the World Bank Website and employs SEM (Structural Equation Modelling) model for testing hypothesis. The results show that the usage of renewable energy in logistical operations would enhance the environmental and economic performance in terms of mitigating carbon emissions and greenhouse gas emissions. While, public health expenditure and environmental performance is negatively correlated, which confirms that greater environmental sustainability with lower carbon emissions and greenhouse gases will improve human health and economic growth. Moreover, greater public health expenditure and poor environmental performance has negative effect on economic growth, inefficiency and low productivity of labor slowdown to the economic activities. For another side, the usage of renewable energy and the adoption of green practices in international logistics will develop the environmental sustainability, establish better image of a country and attract foreign direct investment inflows, and also minimize carbon emissions and public health expenditure, spurring sustainable economic growth with better export opportunities in pro-environmental countries.

Building Information Modelling (BIM) has been more popular in the construction industry as a consequence of the many advantages it offers, such as increased productivity, improved project outcomes, and reduced expenses. However, there are many obstacles that must be overcome before BIM can be widely used. This research uses a poll of construction industry experts to investigate the challenges associated with using BIM in projects. Cost of implementation, inadequate standards and procedures, and a lack of knowledge with BIM were some of the hurdles that were measured in the study. Statistical techniques were used to examine the data, and the findings indicate that the high cost of implementation and the absence of sufficient standards and procedures are the two main obstacles to the widespread adoption of BIM. Problems with supply chain management and a lack of experience with BIM are also mentioned as obstacles. The report also suggests solutions, such as a more focused teaching effort on BIM-related issues and the creation of a specialised BIM curriculum. Professionals in the construction industry may utilise the study’s results to their advantage by expanding their knowledge of the obstacles standing in the way of widespread adoption of BIM.

Software defect prediction is an important means to guarantee software quality. Because there are no sufficient historical data within a project to train the classifier, cross-project defect prediction (CPDP) has been recognized as a fundamental approach. However, traditional defect prediction methods using feature attributes to represent samples, which can not avoid negative transferring, may result in poor performance model in CPDP. This paper proposes a multi-source cross-project defect prediction method based on dissimilarity space ( DM-CPDP). This method first uses the density-based clustering method to construct the prototype set with the cluster center of samples in the target set. Then, the arc-cosine kernel is used to form the dissimilarity space, and in this space the training set is obtained with the earth mover’s distance (EMD) method. For the unlabeled samples converted from the target set, the KNN algorithm is used to label those samples. Finally, we use TrAdaBoost method to establish the prediction model. The experimental results show that our approach has better performance than other traditional CPDP methods.

Australia is a unique continent surrounded by the ocean and the majority of catchments flow to the coast. Some of these catchments are gauged and others are ungauged. There are 405 gauged catchments covering 2,549,000 km2 across the coastal regions of 12 drainage divisions in Australia. Whereas there are 771 catchments conceptualised as ungauged covering additional 835,000 km2. The mean annual rainfall and PET and its spatial and temporal distribution vary significantly from one drainage division to another. We developed a continuous daily streamflow time series of all gauged and ungauged catchments from 1993 onwards. We applied the GR4J lumped conceptual model to these catchments. The performance of gauged catchments was analysed through (i) visual inspection of daily hydrographs, flow duration curves and daily scatter plots, and (ii) performance metrics including NSE and PBias. Based on the NSE and PBias, performance ratings of 80% and 96% of the models respectively were found 'good'. There was no relationship found between the catchment area and model performance. The ungauged catchments were divided into four categories based on distance from potential donor catchments where observed data are available for GR4J model calibration, and Köppen climate zone. The total ungauged catchments represent 24.7% of the total drainage division areas. The streamflow from ungauged catchments was estimated using GR4J model based on the parameters of their donor catchments. Overall, runoff ratios from ungauged catchments were found to be higher compared to their donor gauged catchments, likely driven by their higher rainfall and less PET. This tendency was particularly evident in two drainage divisions – the Carpentaria Coast (CC) and Tanami-Timor Sea Coast (TTS) where ungauged areas comprised 51% and 43% respectively. The mean gauged annual streamflow varied significantly across drainage divisions – 230 GL from South Australian Gulf (SAG) to 146,150 GL in TTS. The streamflow from all ungauged catchments was estimated at 232,200 GL per year. Overall, the average streamflow from all drainage divisions, including gauged and ungauged areas, across the coastal regions of Australia was estimated at 419,950 GL per year. This nationwide estimate of streamflow dataset could potentially enhance our understanding of coastal processes and improvements of marine modelling systems and tools.

The tumor necrosis factor receptor associated factor 1 (TRAF1) plays a key role in promoting lymphocyte survival, proliferation, and cytokine production. Recent evidence showed that TRAF1 plays opposing roles in monocytes and macrophages where it controls NF-B activation and limits pro-inflammatory cytokine production as well as inflammasome-dependent IL-1 secretion. Importantly, TRAF1 polymorphisms have been strongly linked to an increased risk of rheumatoid arthritis (RA). However, whether and how TRAF1 contributes to RA pathogenesis is not fully understood. Moreover, investigating the role of TRAF1 in driving RA pathogenesis is complicated by its multifaceted and opposing roles in various immune cells. In this study, we show that intraarticular injection of TRAF1 deficient macrophages into knee joints of wildtype (WT) mice subjected to the collagen antibody induced arthritis (CAIA) model of RA significantly exacerbated joint inflammation, immune cell infiltration and tissue damage compared to mice injected with WT macrophages. This study may lay the groundwork for novel therapies for RA that target TRAF1 in macrophages.

Promoting organic foods production and consumption contributes to accomplishing United Nations sustainable development goals. Social commerce provides a promising opportunity to develop the organic food industry. However, there is limited knowledge regarding customer behaviors in relation to purchasing organic foods via social commerce platforms. Therefore, this study expanded upon the unified theory of acceptance and use of technology (UTAUT-2) to develop a comprehensive model that explains how customers' social commerce trust and behavioral intentions to purchase organic foods using Instagram social commerce affect their purchasing behaviors. The research model was analyzed by employing partial least squares structural equation modeling (PLS-SEM) for the data collected from a quantitative survey of 410 customers who used Instagram to purchase organic foods in Iran. The results revealed that facilitated purchasing conditions, hedonic motivations, social influence, rating and reviews, and influencers’ endorsements increase customers' purchase intentions. Moreover, Instagram’s recommendations and referrals, influencers’ endorsements, as well as social influence boost customers' trust in the social commerce platform. Eventually, it was determined that influencers’ endorsements, social commerce trust, and purchase intention determine a customer’s organic foods purchasing behaviors. This research provides valuable insights for organic food marketers to optimize their social commerce strategies.

Using the nematode C. elegans germline as a model system, we previously reported that PUF-8 (a PUF RNA-binding protein) and LIP-1 (a dual-specificity phosphatase) repress sperm fate at 20°C and the dedifferentiation of spermatocytes into mitotic cells (termed "spermatocyte dedifferentiation") at 25°C. Thus, double mutants lacking both PUF-8 and LIP-1 produce excess sperm at 20°C, and their spermatocytes return to mitotically dividing cells via dedifferentiation at 25°C, resulting in germline tumors. To gain insight into the molecular competence for spermatocyte dedifferentiation, we compared the germline phenotypes of three mutant strains – fem-3(q20gf), puf-8(q725; fem-3(q20gf), and puf-8(q725); lip-1(zh15). Both fem-3(q20gf) and puf-8(q725); fem-3(q20gf) mutants produced excess sperm like puf-8(q725); lip-1(zh15) double mutants. Our results show that spermatocyte dedifferentiation was not observed in fem-3(q20gf) mutants, but it was more aggressive in puf-8(q725); lip-1(zh15) than in puf-8(q725); fem-3(q20gf) mutants. These results suggest that MPK-1 (the C. elegans ERK1/2 MAPK ortholog) activation by removing the function of LIP-1 in the absence of PUF-8 promotes spermatocyte dedifferentiation. This idea was confirmed using Resveratrol (RSV), a potential activator of MPK-1 and ERK1/2 in C. elegans and human cells. Notably, spermatocyte dedifferentiation was significantly enhanced by RSV treatment, and its effect was blocked by mpk-1 RNAi. We, therefore, conclude that PUF-8 and MPK-1 are normally required to inhibit spermatocyte dedifferentiation and tumorigenesis. Since these regulators are broadly conserved, we suggest that similar regulatory circuitry may control cellular dedifferentiation and tumorigenesis in other organisms, including humans.

Fifth Generation (5G) communication technology is intended to offer higher data rates, outstanding user exposure, power consumption, and extremely short latency. Such cellular networks will implement a diverse multi-layer model comprising of device-to-device networks, macro-cells, and dissimilar categories of small-cells to assist customers with desired quality-of-service (QoS). This multi-layer model affects several studies that confront utilizing interference management and resource allocation in 5G networks. With the growing need and the lack of resources, the resource distribution problem desires to be focused capably to accomplish the traffic and to enhance network working. One of the utmost serious problems is to alleviate the jamming from the network in support of having a better QoS. However, there are limited review papers written on resource distribution, there is no particularize and organized review carry out in 5G resource allocation. Hence, this article covers and evaluates the argument using a classification of existing developing resource allocation schemes in 5G thoroughly by classifying the schemes to enhance the service quality. This survey comprises the discussion based on metrics used to evaluate the performance. It would also permit ahead beyond evidence on resource allocation methods in 5G and empowers the scholars to meet the present research areas to focus on.

Micro-technology has played a substantial role in bioscience, biomedical and biotechnological research due to its core advantages in modern science and engineering. It has created unique development in various sectors of bio-research and upsurges the efficacy of research at the molecular level in recent years. Microfluidic technology makes it possible to manipulate sample volumes at the micro- and nano-level (called nanofluidics) with terrific control outside in vivo cellular microenvironment, enabling the reduction of discrepancies between in vivo and in vitro environments as well as reducing reaction time and cost. In this review, we discuss various effective integrations of microfluidic technologies into biotechnology and its paradigmatic significance in bio-research, supporting mechanical and chemical in vitro cellular micro-environment. Specific innovations relating to the application of microfluidics to advance microbial life, solitary and co-cultures along with a multiple-type cell culturing, cellular communications, cellular interactions and population dynamics are discussed.

Topological indices are numerical parameters of a graph which characterize its topology and are usually graph invariant. In this paper, bounds for the Randić, general Randić, sum-connectivity, the general sum-connectivity and harmonic indices for tensor product of graphs are determined by using the combinatorial inequalities and combinatorial computing.

The laser differential equations are used to transform them into identical coupled maps. Valuable results are deduced during analytical and numerical studies on cavity loss. Phase and spatiotemporal synchronized attractors are observed via quasi-chaos under a certain range of controlling parameters, and symmetry breaking of chaotic attractors due to collision with their basin boundaries, and transpire differently from the previous attractors. During the numerical simulation, it is found that the sequence of repeated strange attractors if the coupling strength further increases, which are orthogonal mirror images (the dynamics of the system is the same at different values of controlling parameters). Moreover, it can help us to predict future problems and their solutions based on current issues, if we develop this model in more general.

The major aim of this study was to investigate and explores the linkage between economic growth, electricity access, energy use and population growth in Pakistan. To check the variables stationarity, Augmented Dickey-Fuller (ADF) and Phillips-Perron unit root test was applied and an Autoregressive Distributed Lag (ARDL) bounds testing approach to co-integration was applied to investigate the dynamic causality link among the study variables. These tests shed light on the long-run connection among the variables; further, the results revealed that electricity access to population, electricity access to urban population, energy usage, population growth, and urban population growth had a significant impact on economic growth, while the electricity access to rural population and rural population growth has a negative impact on the economic growth in Pakistan. According to these findings, study commends that government of Pakistan pay further attention to increase its electricity production from different sources including, hydroelectric, solar, oil and gas and nuclear in order to fulfill the country’s demands. By using ARDL bounds testing approach, this study filled the literature gap regarding economic growth, electricity access, energy use and population growth in Pakistan.

Amyotrophic Lateral Sclerosis (ALS) is a prototypical neurodegenerative disease characterized by progressive degeneration of motor neurons to severely effect the functionality to control voluntary muscle movement. Most of the non additive genetic aberrations responsible for ALS make its molecular classification very challenging along with limited sample size, curse of dimensionality, class imbalance and noise in the data. Deep learning methods have been successful in many other related areas but have low minority class accuracy and suffer from the lack of explainailbilty when used directly with RNA expression features for ALS molecular classification. In this paper we propose a deep learning based molecular ALS classification and interpretation framework. Our framework is based on training a convolution neural network (CNN) on images obtained from converting RNA expression values into pixels based on DeepInsight similarity technique. Then we employed Shapley Additive Explanations (SHAP) to extract pixels with higher relevance to ALS classifications. These pixels were mapped back to the genes which made them up. This enabled us to classify ALS samples with high accuracy for a minority class along with identifying genes that might be playing an important role in ALS molecular classifications. Taken together with RNA expression images classified with CNN, our preliminary analysis of the genes identified by SHAP interpretation demonstrate the value of utilising Machine Learning to perform molecular classification of ALS and uncover disease-associated genes.

Coronavirus disease is a newly identified infectious disease that began in Wuhan, China in 2019 and is recognized as COVID-19. This virus has a serious impact on the planet that causes the deaths of millions of people; it produces unemployment and poverty. However, it has constructive environmental effects that reduce the amount of pollution in the atmosphere. Pakistan is also a developing economy caused by this deadly virus. Before 03 April 2021, the percentage of reported cases ranges from 682,888, with about 14,697 casualties and a total of 609,691 cases retrieved. Pakistan’s war against coronavirus can differ from advanced technical countries due to lack of resources. In this article, we will address the relation between COVID-19 and the environment in the particular case of Pakistan. There is evidence that this pandemic has lowered concentrations of greenhouse gases, including CO2 and NO2, as a consequence of global lock-down strategies.

L-gulonolactone oxidase enzyme (GULO) catalyzes the last step of L-ascorbic acid (vitamin C) biosynthesis. This enzymatic activity is lost in primates. The full-length rat GULO has been previously produced in plants and demonstrated to be active. In this study, we compare activity of two variants of GULO produced in Escheriachia coli cells, full-length rat GULO (fGULO) and its C-terminal catalytic domain (cGULO). The expression and purification of the recombinant proteins were optimised and their biological activity was confirmed by two methods, the GULO activity assay in the protein extracts and the ‘in-gel’ staining for GULO activity. Both variants of recombinant GULO were biologically active in both assays. However, cGULO is more promising than fGULO for ascorbic acid production because it is more efficiently produced by bacteria.

Over the past decade, significant developments have occurred in treatment strategies for ovarian cancer, yet targeted therapy with few side effects is still a major issue. The cytochrome P450 (CYP) enzyme family plays a vital role in the tumorigenesis process and metabolism of drugs, with a negative impact on therapy outcomes. Gaining more insight into CYP expression is crucial for understanding the pathophysiology of ovarian cancer since many isoforms are essential for the metabolism of xenobiotics and steroid hormones, which drive the disease's development. The purpose of this review is to provide a clear understanding of differential CYP expression in ovarian cancer and its implications for the prognosis of ovarian cancer patients, together with their polymorphisms' effect on chemotherapy metabolism. Finally, we provide our thoughts on opportunities to exploit metabolic CYP expression for novel therapeutic development to treat ovarian cancer.

When discussing the Diophantine quintic equation $p(a^5 + b^5) = q(c^5 + d^5)$ where p is a prime and q is an integer, there is a clear gap between the mathematical literature and online forums. Because of the intrinsic complexity of parameterizing fifth-degree equations, this equation re- mains largely unexplored. In this work, we approach this quintic problem through algebraic methods with the goal of providing numerical solutions that illuminate its properties and behaviors.Our research uncovers in- triguing patterns and connections that shed light on the enigmatic nature of Diophantine quintic equations in this particular form.

Globally, large numbers of adults remain unbanked and most of them live in rural areas of the Third World. The recent outbreak of the COVID-19 pandemic has shown us how inequalities in accessing financial services continue to affect us. However, financial inclusion has emerged as an effective tool to tackle socioeconomic ills and drive economic development. In fact, due to these modern technological developments, the number of studies in this area is very limited, especially in the context of developing economies. This study examines the impacts of migrant remittances on digital financial inclusion within households using the Migration and Remittance Household Survey in Bangladesh. To meet the research objectives of this study, a household survey was conducted and interviewed 2,165 households in 2022-2023 in Bangladesh. This study finds that the coefficient of remittance has a positive relationship with the probability of using mobile banking for a household's financial transactions. However, the use of ATM cards by households for financial transactions has not been significantly affected. The article concludes that remittance flows may enhance access to and use of digital financial inclusion by reducing some of the barriers and costs in Bangladesh, which can greatly contribute to the country's economic growth by creating and increasing a strong fund for investment.

People must have particular personality traits and social resources, also known as health literacy, in order to access, comprehend, and use information to make decisions about their health. Patients' ability to engage in complex disease management and self-care is strongly related to their level of health literacy. It can help us stay healthy by preventing illness and effectively managing existing illnesses. People with low health literacy (LHL) may find it difficult to manage their condition and prevent illness, which may lead to increased use of healthcare services. Furthermore, LHL is associated with increased hospitalizations, increased use of emergency care, decreased use of preventative services, and a worsened ability to understand labels and health messages, a worsened state of health, higher mortality, and more expensive medical care.

COVID-19 has affected 210 countries around the world, killed more than 240,000 and infected more than 3.4 million. Bangladesh, a South Asian low-middle-income economy, has experienced a demographic and epidemiological transition with rapid urbanization and a gradual increase in life expectancy. It is the seventh most populous country in the world and population of the country is expected to be nearly double by 2050. The increasing burden of noncommunicable diseases in Bangladesh can be attributable to rapid urbanization and nearly 50% of all slum dwellers of the country live in Dhaka division. In 2017, National Rapid Response Team of IEDCR investigated 26 incidents of disease outbreak. The joint survey of the Power and Participation Research Centre and BRAC Institute of Governance and Development reveals that per capita daily income of urban slum and rural poor drops by 80% due to present countrywide shutdown enforced by the government to halt the spread of Covid-19. 40%-50% of these population took loans to meet the daily expenses.

This paper investigates and explores the minor crops production in Pakistan and its association with the agricultural gross domestic product. The agriculture sector of Pakistan has a rich contribution to the economic growth and development. Like major crops; minor crops also have a vital role to boost up the agriculture sector. Time span data was used in this study and it was collected from the Economy Survey of Pakistan annual reports. Augmented Dickey-Fuller (ADF) unit root test and Ordinary Least Square (OLS) method was used to analyze the data and results were interpreted by employing the Johansen co-integration test. Study results reveal that bajra, barely and jowar has a significant impact on the agricultural gross domestic product, while the total cropped area has a negative impact on AGDP. On the basis of the study results, we recommend the policy implications.

The world is looking towards organizations for social responsibility to contribute to a sustainable environment. Employees’ organizational citizenship behavior for the environment (OCBE) is a voluntary environmental-oriented behavior that is important for organizations’ environmental performance. Based on social learning theory, the study examined the effects of responsible leadership in connection with OCBE by using a sample of 520 employees of manufacturing and service sector including engine manufacturing, petroleum plants banking and insurance sector organizations of China. Further, the role of psychological ownership and employee environmental commitment were used as mediators and moderators simultaneously. The direct, mediation, and moderation model results exposed a positive relationship between responsible leadership and OCBE via employee psychological ownership and employee environmental commitment. The study also revealed that the indirect effect is stronger when employees hold higher employee environmental commitment. The theoretical and practical implications for environmental sustainability in respect of organizations as well as future research directions are discussed.

An efficient design of conservation tillage trencher (CTT) saves time, natural resources, and conserves soil health by avoiding vigorous soil disturbance of tillage operations. A two-wheel tractor operated CTT has constructed with modified rotary shafts, toolbar frames, depth control bars, bed shapers and chisel ploughs for conservation tillage operation of sugarcane plantation. The performance evaluation of developed CTT was tested for comparing the suitability with small-scale farmer’s practice (SFP) and large farm practice (LFP). Finally, the CTT is applied for preparing sugarcane farmland in different conservation tillage methods of i) bed cum trenching (BT), ii) zero-tillage trenching (ZT) and iii) strip-tillage (ST). The performance of effective field capacities of CTT were 0.14 ha h-1, 0.12 ha h-1 and 0.14 ha h-1 for BT, ZT and ST, respectively. Developed CTT saved time 80% and 26-37% over SFP and LFP, and required 96% and 26-36% less labour than SFP and LFP, respectively. Conservation tillage required 7-10 l ha-1diesel whereas SFP and LFP required 25 l ha-1and 65 l ha-1, which reduced CO2 emission by 60-72% and 85-89% compared to SFP and LFP, respectively. Ultimately, newly developed CTT saved sugarcane land preparation costs by 86% to 90% compared to conventional tillage systems.

The application of instrumented indentation to assess material properties like Young’s modulus and micro-hardness has become a standard method. In recent developments, indentation experiments and simulations have been combined to inverse methods, from which further material parameters as yield strength, work hardening rate, and tensile strength can be determined. In this work, an inverse method is introduced by which material parameters for cyclic plasticity, i.e. kinematic hardening parameters, can be determined. To accomplish this, cyclic Vickers indentation experiments are combined with finite element simulations of the indentation with unknown material properties, which are then determined by inverse analysis. To validate the proposed method, these parameters are subsequently applied to predict the uniaxial stress-strain response of a material with success. The method has been validated successfully for a quenched and tempered martensitic steel and for technically pure copper, where an excellent agreement between measured and predicted cyclic stress-strain-curves has been achieved. Hence, the proposed inverse method based on cyclic nanoindentation, as a quasi-non-destructive method, could complement or even substitute the resource-intensive conventional fatigue testing in the future for some applications.

In this study, we evaluated the potential of fungal endophytes to control yellow rust in wheat (Triticum aestivum L.) as endophytes are beneficial microbes and alternate to pesticides for confronting pathogens. The in-vitro efficacy of the fungal endophytes isolated from different desert plants was evaluated and the best four namely Colletotrichum lindemuthianum, Piriformospora indica, Acremonium lolii and Trichoderma viride were selected. Seeds of two susceptible wheat genotypes namely Fareed-06 and Shafaq-06 obtained from screening experiment were inoculated by dipping in four endophytic spore suspensions and were sown using randomized complete block design under factorial arrangement. Data concerning about area under disease progress curve, final disease severity percentage, coefficient of infection,1000- grains weight and grain yield were recorded. Results showed that endophyte P. indica showed significant decrease in final disease severity (FDS) and area under disease progress curve (AUDPC), resultantly 12.2% grain yield gain in rust susceptible wheat genotypes of Fareed-06 and Shafaq-06 followed by the endophytes T. viride, C. lindemuthianum and A. lolii with the grain yield gain of 10.6%, 06.2% and 04.2% respectively. In crux, fungal endophytes are valuable microbes which can be employed to induce tolerance against P. striiformis in yellow rust vulnerable areas for better and sustainable wheat production.

There is clinical concern about the combined use of alcohol and opiates. Several lines of evidence support an interaction between alcohol and the endogenous opioid system. Thus, we hypothesized that ethanol by causing the release of opioid peptides may sensitize the system to the action of exogenous opioids such as morphine. In this study, using the place conditioning paradigm as an animal model of reward, we determined whether a morphine challenge would alter the pre-established preference induced by ethanol conditioning in mice, and whether this response was mediated by the mu opioid receptor (MOP). Given that ethanol exposure stimulates the release of opioid peptides, we also assessed the role of beta-endorphin (β-END) and enkephalins (ENKs) in this response. Mice lacking MOP, β-END and/ or ENKs as well as their respective wild-type controls were tested for baseline place preference on day 1, conditioned with ethanol (2 g/kg) versus saline on days 2 to 4 and then tested under a drug-free state for postconditioning place preference on day 5. On day 8, mice received a single injection of morphine (5 mg/kg) and were tested for place preference. On each test day, mice were placed in the central neutral chamber and allowed to freely explore the conditioning chambers. The amount of time that mice spent in each chamber was recorded. We found that a challenge dose of morphine given on day 8 enhanced the CPP response in mice previously conditioned with ethanol. This response was abolished in MOP null mice, confirming the role of MOP in this response. Although this enhanced response was not altered in mice lacking either β-end or ENKs compared to their wild-type littermates/controls, it was completely blunted in mice lacking both β-end and enkephalins. Together, these results suggest that these opioid peptides jointly mediate the crosstalk between the rewarding actions of morphine and ethanol.

Currently, various issues on environment have been discussed, whether the importance, destruction or ways to prevent the destruction of the environment. This paper will explore the issue from the conventional viewpoint as well as from the Islamic perspective. Destruction of the environment in recent times has worsened due to the uncontrolled exploitation of natural resources by human beings in order to generate profits. In view of the increasing technological development in Malaysia presently, this matter should not have occurred because the citizens intellectual abilities can be considered advanced. In other words, these people should be able to weigh between positive and negative consequences of voraciously exploiting natural resources. However, the greed that engulfs some of these people has obscured their view from grasping the future consequences of their acts. Based on the Islamic perspective in which the Quran is the ultimate reference, destruction of the environment can actually be prevented if every individual is aware of his or her trustworthiness or responsibility as His caliphate in this universe. Nevertheless, is there any specific verse in the Quran which explains about preservation of the environment? Can lessons from the Quran provide solutions to the environmental crises in Malaysia? This study provides explanations to the questions based on literature surveys and content analyses. By interpreting some selected verses that relate to preservation of the environment, findings from the discussions have identified that the Quranic verses are valuable resources for the sustainability of the environment.

The primary distribution systems are comprised of power lines delivering power to utility feeders from substations. The inspection and maintenance of damaged and broken power system insulators are of paramount importance for continuous power supply and public safety. hence, to identify any faults and defects in advance a periodic inspection of power line insulators and other components be ensured beforehand. To automate the process and reduce operational cost and risk Unmanned Aerial Vehicles (UAVs) are being extensively utilized. As they present a safer and efficient way to examine the power system insulators and their components without closing the power distribution system ensuring continuous supply to the end-users. To achieve these objectives in this work a novel dataset is designed by capturing real images using UAVs and manually generated images collected to overcome the data insufficiency problem. Deep Laplacian pyramids based super-resolution network is implemented to reconstruct high-resolution training images. To improve the visibility of low light images a low light image enhancement technique is used for the robust exposure correction of the training images. Using computer vision-based object detection techniques to identify faults and classify them according to classes they belong. A different fine-tuning strategy is implemented for fine-tuning the object detection model to increase detection accuracy for the specific faulty insulators. To improve the faults detection several flight path strategies are proposed for efficient inspection. Such strategies overcome the shuttering effect of insulators along with providing a less complex, time, and energy-efficient approach for capturing video stream of the power system components. Performance of different object detection models is presented for selecting the suitable one for fine-tuning on the specific faulty insulator dataset. Our proposed approach gives a less complex and more efficient flight strategy along with better results. For defect detection, our proposed method achieved an F1-score of 0.81 and 0.77 on two different datasets. Our approach is based on real aerial inspection of in-service porcelain insulators by extensive evaluation of several video sequences showing robust faults recognition and diagnostic capabilities. Our approach is demonstrated on data acquired by a drone in Swat Pakistan.

(1) Background: The present study was carried out to provide new information about the relation between angiogenesis, tumor stage Oral squamous cell carcinoma (OSCC); (2) Materials and methods: Thirty formalin-fixed paraffin embedded blocks were used, 10 of them were previously diagnosed as well differentiated OSCC, 10 moderate differentiated OSCC and 10 poorly differentiated OSCC. To determine the expression of CD31 and D2-40 proteins, streptavidin-biotin immunoperoxidase staining technique was used. The areas with the most vascular density (hot spots) were determined. The stained vessels were counted independently in intratumoral and peritumoral stroma in five areas of hot spot at ×400 magnification; (3) Results: Immunohistochemical staining using CD 31 protein showed that CD31-positive vessels in the peritumoral and intratumoral stroma subjacent to the malignant invading nests which was recorded highest values in poor differentiated OSSC followed by moderate differentiated OSSC then well differentiated OSSC. D2-40 expression was positive in lymphatic vessel in the peritumoral and intratumoral stroma subjacent to the malignant invading nests. Poorly differentiated OSSC tissue sections recorded the highest vessels count followed by moderate differentiated OSSC then well differentiated OSSC. There was statistically significant difference found between the three studied groups regarding CD31 and D2-40 levels. Also there was statistically significant positive correlation found between CD31 level and D2-40 level and vice versa; (4) Conclusion: CD31 and D2-40 are related to stage of OSCC and are consistent with angiogenesis in tumor progression.

Microencapsulation of polyherbal formulation (PHF) extract was carried out by freeze drying method, by employing gum arabic (GA), gelatin (GE), and maltodextrin (MD) with their designated different combinations as encapsulating wall materials. Antioxidant components (i.e total phenolic contents (TPC),Total flavonoids contents (TFC), and total condensed contents (TCT)), antioxidant activity (i.e. DPPH, β-carotene & ABTS⁺ assays), moisture contents, water activity (aw), solubility, hygroscopicity, glass transition temperature (T_g), particle size, morphology, in vitro alpha-amylase and alpha-glucosidase inhibition and bioavailability ratios of the powders were investigated. Amongst all encapsulated products, T_B (5% GA and 5% MD) and T_C (10% GA) has proven to be the best treatments with respect to the highest preservation of antioxidant components and their antioxidant potential by DPPH and β-carotene assays and noteworthy for an ABTS⁺ assays, in addition, the aforesaid treatments also demonstrated lower moisture content, aw, particle size and higher solubility, hygroscopicity and glass transition temperature (T_g). All freeze dried samples showed irregular (asymmetrical) microcrystalline structures. Furthermore, T_B and T_C also illustrated the highest in vitro anti-diabetic potential due to great potency for inhibiting alpha-amylase and alpha-glucosidase activities. In the perspective of bioavailability, T_A, T_B and T_C demonstrated the excellent bioavailability ratios (%).Futhermore, the phytochemo-profiling of ethanolic extract of PHF was also revealed to find out the bioactive compounds.

The Armillaria genus represents one of the most common causes of chronic root rot disease in woody plants. The disease damage prompt assessment is crucial for pest management. However, the disease detection current methods are limited at the field scale. Therefore, an alternative approach that can enhance or supplement traditional techniques is needed. In this study, we investigated the potential of hyperspectral methods to identify the changes between fungi-infected and uninfected plants of Vitis vinifera in early detecting the Armillaria disease. The hyperspectral imaging sensor Specim-IQ was used to acquire images of leaves of the Teroldego Rotaliano grapevine cultivar. We analysed three groups of plants: healthy, asymptomatic, and diseased. Highly significant differences were found in the Near infrared (NIR) spectral region with a decreasing pattern from healthy to diseased plants attributable to internal leaf structure changes. Asymptomatic plants emerged from the other groups due to a smaller reflectance in the red-edge spectrum (around 705nm). Hypothetically associated with the presence of secondary metabolites involved in plant defence strategy. Furthermore, significant differences were observed in the wavelengths close to 550 nm in diseased plants versus asymptomatic. We used linear discriminant analysis from a machine learning context to classify the leaves based on the most significant variables (vegetation indices and single bands), with resulting overall accuracies of 85% and 84% respectively in healthy vs. diseased and healthy vs. asymptomatic. To our knowledge, this study represents the first report on the possibility of using hyperspectral data for root rot disease diagnosis on woody plants. Although further validation studies are required, it appears that the spectral reflectance technique, possibly implemented on unmanned aerial vehicles (UAV), could be a promising tool for a cost-effective, non-destructive method of Armillaria disease early diagnosis and mapping in the field, contributing to a significant step forward in precision viticulture.

The peach industry faces serious economic losses because of the short “green” life of the fruit at postharvest. In the present study, we investigated the effects of putrescine (PUT) application on the quality characteristics, pattern of ripening, storage behavior, and shelf life of peach fruit during low-temperature storage. The aqueous solution of PUT (0, 1, 2, and 3 mM) was applied onto the peach trees at three distinctive stages of fruit growth and development. The fruit, harvested at the commercial stage of maturity, were stored at 1 ± 1 °C and 90 ± 2% relative humidity for 6 weeks. The data for fruit firmness, total soluble solids (SSC), titratable acidity (TA), ascorbic acid (AsA) content, rate of ethylene production, chilling injury (CI) index, and color perception were collected at harvest and then on a weekly basis throughout the storage period. The results showed that spray application of PUT significantly reduced the incidence of CI and reduced the rates of fruit softening, loss in fruit weight, SSC, TA, AsA content, and fading of skin color during storage, regardless of the doses of PUT applied or time of application. However, the positive effects on the quality characteristics of peach fruit, including CI, were more pronounced with the higher doses of PUT, specifically when applied at 2 mM. In conclusion, CI in peach fruit may be substantially alleviated by the spray application of 1–3 mM PUT during fruit growth without compromising the quality of the fruit for up to 6 weeks of low-temperature storage.

Lung cancer is a deadly disease if not diagnosed in its early stages. However, early detection of lung cancer is a challenging task due to the shape and size of its nodules. Radiologists need support from automated tools for precise opinion. Automated detection of the affected lungs nodule is difficult because of the shape similarity among healthy tissues. Over the years, several expert systems have been developed that help radiologists to diagnose lung cancer. In this article, we propose a framework to precisely detect lungs cancer by classifying it between benign and malignant nodules. The framework is tested using the subset of the publicly available at the Lung Image Database Consortium image collection (LIDC-IDRI). Multiple techniques including filtering and noise removing are applied for pre-processing. Subsequently, the OTSU and the semantic segmentation are used to accurately detect the unhealthy lungs nodules. In total, 13 nodules features were extracted using Principal Components Analysis (PCA) algorithm. Four optimal features are selected based on the classification performance. In the classification phase, 9 different classifiers are used along with two types of validation schemes i.e. train test holdout validation with 70-30 data split and 10 fold cross-validation. Our experiments show that the proposed system provides 99.23\% accuracy using logic boost classifier.

The laser sintering process and modification of electrophoretic deposition (EPD) YSZ coatings on YSZ air plasma sprayed thermal barrier coatings (TBCs) were investigated. Ni-based superalloy was plasma sprayed using yttria-stabilized zirconia (YSZ) to perform thermal barrier coating with 400 μm thickness. The electrophoretic deposition (EPD) technique was used for depositing nanopowder of YSZ on the surface of YSZ TBCs. In this study, a technology of direct sintering the green EPD layer by laser beam was carried out. The best conditions of deposition YSZ overlay coating using DC current were obtained with applied voltage 40 V, deposition time 5 min, and suspension concentration 10 g/l. Iodine was added to the solutions as the stabilizing agent. To overcome the disadvantages of high sintering temperatures, laser sintering was taken as a new approach. Microstructures for all specimens were studied using Field Emission Scanning Electron Microscopy (FESEM) with EDS analysis. Surface roughness was investigated using AFM analysis and central line average (CLA). The results indicated that the morphology after the direct laser sintering of the EPD layer has a fine and controllable grain size, high hardness, and low roughness. Which is better than the direct laser on plasma-sprayed coatings.

Few studies have explored the gender wage gap among farmworkers, and there is a notable absence of research on how farm wages impact household welfare differently based on gender. This study aims to fill this gap by examining how farm wages affect gender disparities in household welfare among farmworkers in Nigeria. Using survey data from 720 farmworkers, we investigated gender-based differences in household welfare. Our approach combined parametric methods (Blinder-Oaxaca decomposition) to assess gender gaps in household welfare and non-parametric techniques (Propensity Score Matching, PSM) to estimate the effects of farm wages. The analysis reveals that female farmworkers experience significantly lower per capita food consumption expenditure (₦11,486.51 less) compared to their male counterparts. These disparities partly stem from differences in socioeconomic factors, job characteristics, and enterprise attributes between male and female farmworkers. The study underscores the role of farm wages in mitigating gender gaps in household welfare, demonstrating that farm wages have increased per capita food consumption expenditure for female farmworkers by ₦6,640.698. This finding highlights the potential of wage increases to enhance livelihoods, underscoring the importance of equitable wage policies in farming. Furthermore, our findings emphasize that the impact of farm wages on welfare varies with household characteristics, suggesting the need for targeted interventions tailored to enhance identified household attributes. Addressing these factors could effectively reduce gender inequalities in farm work and contribute to overall welfare improvements.

In this article, our main purpose is to establish a new extension of Mittag-Leffler function by using the known extended beta function $\mathbf{B}_{\omega}(a,b;p)$ introduced in [1]. It led to a novel extension of the applicability of Mittag-Leffler function that introduced them as distributions defined for a specific set of functions. We also, investigate some of its important properties, namely recursion relation, Mellin transform and differential formulas.

This study aimed to assess knowledge and practice of caregivers and its relationship to the disease and nutritional status of children under five years of age in rural areas of Sylhet, Bangladesh. A total of 110 households having 6 to 59 months aged children was selected by simple random method from ten rural communities of three Upazila of Sylhet during September 2019 to February 2020. Descriptive statistics were used to assess the WASH knowledge & practice and multivariate chi-square analyses were performed to assess associations among diseases & nutritional status with WASH following a structured questionnaire. The study found a significant association of WASH with childhood disease and nutritional status, and 65% of children were found to be in a diseased state and 35% of children were found to be in a disease-free state within the last six months. The findings sketched that mother with poor wash knowledge and practice was at greater risk for disease outbreaks, disease frequency and duration. The highest incidence of diarrhea was 17% in children aged 12 to 23 months. Significant effect of WASH was also found in children nutrition status, that was reflected in the ratio of stunted, underweight and wasted children. Integrated convergent work focusing on the provision of clean water within the household, stop open defecation, promotion of hand washing, behavior change and poverty alleviation is needed to improve the situation. Health, nutrition and livelihood programs should be uninterrupted, and mothers or caregivers should be encouraged to participate in these programs.

This study provides a thorough examination of the introduction of 5G technology in Bangladesh's agriculture sector, providing insights into the problems and potential implications related to its adoption. Focusing on the contextual landscape of Bangladesh, the study evaluates the effectiveness, efficiency, scalability, and ease of implementation of 5G technology concerning key challenges faced by the agricultural sector. Drawing comparisons with global perspectives, including countries such as China, Taiwan, Colombia, Netherlands, and India, the analysis provides a nuanced understanding of the diverse technological landscapes. The examination encompasses the evolution from 4G to 5G, emphasizing the commitment of major telecommunications providers in Bangladesh to advance technological capabilities. The challenges in rural adoption, limited technology literacy among farmers, and high smartphone costs are discussed, highlighting potential barriers to seamless integration. To address the creation of a more comprehensive technological infrastructure, the study also explores the efforts and regulatory support provided by the government and the Bangladesh Telecommunication Regulatory Commission (BTRC). Furthermore, the comparative analysis sheds light on the unique characteristics and advancements in other countries, contributing to a holistic understanding of 5G's role in transforming global agricultural practices. By exploring the anticipated socio-economic factors influencing the pace and success of 5G adoption in the agricultural sector, this paper emphasizes the need for collaborative efforts, infrastructure development, and addressing accessibility challenges to achieve widespread agricultural technology integration.

Background: This study aims to investigate the effects of visual neurofeedback stimulation on the brain activity in overweight cases. The neuroscience studies indicated the personal decision about eating under the impact of environmental factors such as (visually, smelling, tasting) is related to neural activity of the prefrontal lobe of the brain. Therefore, there were many attempts to modify the food intake behavior in overweight cases through the stimulation of the prefrontal cortex. However, the empirical viewing of EEG-neurofeedback experiments has not explicated the details about the effect of the EEG-NF, the specificity of positive treatment effects remains in a challenging scope.Methods: This study is a cue-exposure EEG-NF experiment to verify the hypothesis of effecting the EEG-NF on the electrical activity of PFC and modifying the general symptoms of food intake behavior in overweight cases. Twenty-four individuals were recruited as participants for this study. These participants were assigned randomly into two groups; the EX-Group (N=12) enrolled in 8 sessions of the EEG-NF experiment, and the C-Group (N=12) was listed in no EEG-NF sessions. The participants provided researchers with a self-report questionnaire relating to their observation of general symptoms of food intake behavior, and EEG signals recordings into the pre and posts stimulation phase. The power spectral density (PSD) method was applied for EEG parameters extraction.Results: The results of a two-way analysis of variance (ANOVA) explained that a significant variation in variables between the two groups after the EEG-NF experiment. The analysis of the quantitative variables indicated that the effect of EEG-NF experiment was a significant decrement in EEG power bands which significantly influenced changing the median of self-report questionnaire responses that is related to general symptoms of food intake behavior.Conclusions: This study provides preliminary support for the therapeutic potential of EEG-NF experiment that targets the prefrontal cortex, to influence neural processes underlying food intake behavior in overweight cases.

Childhood nutrition is a cornerstone of long-term health, yet many children exhibit reluctance to consume healthy foods such as vegetables. This aversion can be influenced by various factors, including food neophobia and the sensory and visual appeal of the foods presented. Understanding how visual cues affect children's willingness behaviors can provide insights into effective strategies to enhance their dietary habits. This study aims to investigate the liking and emotional responses on the relationships between intrinsic and extrinsic cues and children's willingness to eat and to ask parents to buy. To understand how these factors influence children with food neophobia food-related behaviors and to identify effective strategies to promote healthier eating habits. A sample size consisting of 420 children recruited was needed in this cross-sectional study. A validated and reliable self-administered questionnaire was employed. Independent t-test and ANOVA were used to test the differences between gender and food neophobia means. Spearman correlations were used for correlation analysis. Hierarchical regression analyses were conducted to explore the relationships among intrinsic cues, extrinsic cues, and the mediating effect of liking and emotional responses. Attributes such as plate color and shape significantly influence children's food-related behaviors and their emotions. Liking and emotional responses significantly mediates the relationship between intrinsic/extrinsic cues and willingness. Positive visual cues experiences are crucial for increasing children's inclination to purchase and consume. Positive emotional responses enhance acceptance and purchase. There are significant differences between boys and girls. Boys prefer blue and triangular plates, while girls prefer pink plates and generate more positive emotions. Children with food neophobia will initially experience a disorder, but its negative effects can be mitigated by increasing sensory appeal and emotional engagement. By employing strategies designed to enhance visual cues and liking and emotions, children’s willingness to choose healthy eating habits can be effectively increased.

Ganoderma boninense is the major causal agent for the basal stem rot (BSR) disease in oil palm, causing the progressive rot of the basal part of the stem. Despite its prominence, key pathogenicity determinants for the aggressive nature of hemibiotrophic infection remain unknown. In this study, genome sequencing and annotation of G. boninense T10 were carried out using the Illumina sequencing platform and comparative genome analysis was performed with previously reported G. boninense strains (NJ3 and G3). The pan-secretome of G. boninense was constructed and comprised of 937 core orthogroups, 243 accessory orthogroups, and 84 strain-specific orthogroups. A set of core candidate effector proteins (CEPs) were found to be enriched with catalytic protein classified as the carbohydrate-active enzymes, hydrolases as well as non-catalytic proteins. Differential expression analysis revealed an upregulation of CEP genes which was linked to the suppression of PTI signaling cascade while the downregulation of CEP genes was linked to the inhibition of PTI by preventing host defense elicitation. Genome architecture analysis revealed the one-speed architecture of the G. boninense genome and the lack of preferential association of CEP genes to the transposable elements. The findings obtained from this study would aid in the characterization of pathogenicity determinants and molecular biomarkers of BSR disease.

Societal changes have had effects on deaths from all causes in Russia. Up until now, deaths from all causes have been well researched, although several inconsistencies persist on the contributions of researchers. This study assessed research output, trends and topics that shaped deaths from all causes studies in Russia. Using bibliometric and topic modelling approaches, deaths from all causes in Russia published from 1914 to date was analysed using data on publications, citations, journals, keywords co-occurrence, year of publication, institutional affiliations, and country of origin from Scopus. Overall results indicate a steady growth of publications in Russia was documented after 1985. The h-index of some top 10 authors did not surpass single digits. A network visualisation map showed that ‘Russia’, ‘male’, ‘mortality’ and ‘human’ were the most commonly encountered vital terms. Of the ten most prolific authors, McKee M, Shkolnikov VM, Bobak M, Samorodskaya IV and Andreev E were the first five. Although the top 10 journals researching on death causes in Russia were Russian, these journals were not included in the most cited journals. The most prolific institutions studying deaths in Russia included; Tehran University of Medical Sciences, London School of Hygiene and Tropical Medicine, University College London, Max Planck Institute for Demographic Research and National Research University-Higher School of Economics. Findings suggest that deaths from all causes research attention in Russia increased in recent years, but the number of publications and research related engagements (e.g., networking and/ collaboration) does not match-up to other countries (e.g., UK, US, Germany). This research lag calls for more collaborative research between public health disciplines and networking among researchers (i.e., both national and international).

Chronic fatigue and fibromyalgia symptoms frequently occur in major depressive disorder (MDD). The pathophysiology of these symptoms may in part, be ascribed to activated immune pathways, although it is unclear whether muscular factors play a role in their onset. The aim of the present study is to examine the role of muscle proteins in major depression in association with symptoms of chronic fatigue and fibromyalgia. We measured serum levels of agrin, talin-2, titin, and creatine phosphokinase (CPK) as well as the FibroFatigue (FF), the Hamilton Depression Rating Scale (HAM-D) and the Beck Depression Inventory (BDI-II) in 60 MDD patients and 30 healthy controls. The results show a significant increase in agrin and talin-2 in MDD patients as compared with controls. There were highly significant correlations between agrin and HAM-D, BDI-II and FF scores. Agrin, but not talin or titin, was significantly and positively associated with all 12 items of the FF scale. We found that a large part of the variance in HAM-D (47.4%), BDI-II (43.4%) and FF (43.5%) scores was explained by the regression on agrin, smoking, female sex (positively associated) and education (inversely associated). CPK was significantly and inversely associated with the total FF score and with muscle and gastro-intestinal symptoms, fatigue, a flu-like malaise, headache and memory, autonomic and sleep disturbances. These results suggest that aberrations in neuromuscular (NMJs) and myotendinous junctions may play a role in MDD and that the aberrations in NMJs coupled with lowered CPK may play a role in symptoms of chronic fatigue and fibromyalgia in MDD. Moreover, the increase of agrin in MDD probably functions as part of the compensatory immune-regulatory system (CIRS).

Over the last three decades, special economic zones (SEZs) have given new impetus to the ever-growing export-oriented industrialization in developing countries. Where various economies have benefited from SEZs, many zones have ended up becoming enclaves with trifling advantage. The SEZs in Pakistan have experienced the same fate and failed to contribute to exports, employment and creating linkages with the domestic economy. Recently under China Pakistan Economic Corridor (CPEC), SEZs are proposed to be set up in Pakistan; with a hope to fuel the stuttering economy. However, it is pertinent to first understand the local context and device policies considering stakeholders' perspectives. This study aims to identify the factors for the successful implementation of SEZs derived from the regional context of Pakistan. In-depth interviews are conducted from most relevant stakeholders, who have been involved in the development of SEZs. The results pointed towards the removal of political influence over zones and government taking the lead role in deciding the types of industry to be invited in these zones. Each zone should have a clear vision of development based on its regional advantage. The zone promotions should be based on competitiveness rather than fiscal incentives. Joint ventures and PPP to be encouraged inside the zones for sustainable operations.

The regulation of apoptosis depends upon the Bcl-2 protein family. The process of cell death and survival is highly complicated and regulated by various types of extrinsic as well as intrinsic network of biological system. Several enzymes and regulators play crucial role in cell death and survival cycle not only in healthy but also in pathological state particularly in cancer. In cancerous cells, various proto-oncogenes and anti-apoptotic proteins are activated and responsible for the cell survival and longevity. The mechanism of activation and inactivation of various proteins in cell survival is regulated by the process of phosphorylation (kinases) and dephosphorylation (phosphatases). The current review will summarize the dynamics of Bcl-2 phosphorylation and its role in apoptosis and cell survival.

Bile acids (BA) are classically known as an agent important in lipid absorption and cholesterol metabolism. Nowadays, BAs have been found to be involved in various cellular signaling pathways such as protein kinase cascades, cyclic AMP (cAMP) synthesis and calcium mobilization. In addition, they have also been shown to regulate glucose and energy homeostasis. Bile acids are ligands for several nuclear hormone receptors, including FXR. Recently, muscarinic receptor and TGR5, G-protein-coupled receptor (GPCR), have been suggested to play a role in bile acid activity which is independent of nuclear hormone receptors. Moreover, BAs have also been studied in other GPCR associated pathways, namely sphingosine-1-posphate and glucagon receptor. Hydrophobic bile acids have been proven to affect heart rate and its contraction. Elevated bile acids are associated with arrhythmias in adults and fetal heart. Altered ratios of primary and secondary bile acid are reported in chronic heart failure patients. Meanwhile in patients with liver cirrhosis, cardiac dysfunction has been strongly linked to the increase of serum bile acid concentrations. In contrast, the most hydrophilic BA known as ursodeoxycholic acid has been found beneficial in improving peripheral blood flow in chronic heart failure patients and protecting heart against reperfusion injury.

Robot Operating System 2 (ROS 2) is a robotic software that uses a set of Quality of Service (QoS) policies to manage the quality of robot data transmissions in a network, such as the RELIABLE and KEEP_LAST options. In ROS 2 node communication, the RELIABLE connection guarantees that all message data can be properly sent from the publisher to the subscriber. However, strict reliability is not guaranteed if the RELIABLE connection uses the KEEP_LAST option to transmit the robot data in the publish-subscribe communication. This study aims to analyze the efficiency of local cache, cache control, and QoS balancing optimization to improve ROS 2 node communication when using the RELIABLE and KEEP_LAST options to transmit multi-robot data in Aggregated Robot Processing (ARP) architecture. Our idea in local cache and cache control is to streamline the sensor data output before processing it when the sensor device produces the data with the same value in a row. Furthermore, QoS balancing optimization aims to balance the DEPTH and DEADLINE QoS configuration to determine the rates and buffer size in ROS 2 node communication. This study shows that combining local cache and QoS balancing optimization improves multi-robot data transmission and cooperation in ARP architecture.

Aim: aim of this study is to evaluate the clinical and radiographic healing after repairing mechanical furcal perforations that occurred in primary molars by using MTA (Mineral Trioxide Aggregate) and search in some factors that may affect the prognosis of the treatment. Materials & Methods: we had 34 primary molars in 32 children aged 5–10 years, were treated by using MTA material after the occurrence of furcal perforation during pulpotomy procedure. Cases had been followed clinically and radiographically within 12 months. Statistical analyses were performed at p-value = 0.05. Results: All teeth were asymptomatic at the first week. Overall success rate was 79.3%. There was no significant statistically differences between overall-success rates according to the perforation size and continues bleeding in the furcation area (p-value > 0.05). Conclusions: Iatrogenic furcal perforations that may occur during pulpotomy in primary molars can be treated successfully by using MTA, and small sized-perforations may have more favorable prognosis than the large ones. Iatrogenic furcal perforations that may occur during pulpotomy in primary molars can be treated successfully by using MTA, and small sized- perforations may have more favorable prognosis than the large ones.

The fidelity of the decadal experiment in Coupled Model Intercomparison Project Phase-5 (CMIP5) has been examined, over different climate variables for different temporal and spatial scales, in many previous studies. However, most of the studies were for the temperature and temperature-based climate indices. A quite limited study was conducted on precipitation of decadal experiment and no attention was paid to a catchment level. This study evaluates the performances of eight GCMs (MIROC4h, EC-EARTH, MRI-CGCM3, MPI-ESM-MR, MPI-ESM-LR, MIROC5, CMCC-CM, and CanCM4) for the monthly hindcast precipitation of decadal experiment over the Brisbane River catchment in Queensland, Australia. First, the GCMs datasets were spatially interpolated onto a spatial resolution of 0.050×0.050 (5 km× 5 km) matching with the grids of observed data and then were cut for the catchment. Next, model outputs are evaluated for temporal skills, dry and wet periods, and total precipitation (over time and space) based on the observed values. Skill test results reveal that model performances varied over the initialization years and showed comparatively higher scores from the initialization year 1990 and onward. Models with finer spatial resolutions show comparatively better performances as opposed to the models of coarse spatial resolutions where MIROC4h outperformed followed by EC-EARTH and MRI-CGCM3. Comparing the skills, models are divided into three categories (Category-I: MIROC4h, EC-EARTH, and MRI-CGCM3; Category-II: MPI-ESM-LR and MPI-ESM-MR; and Category-III: MIROC5, CanCM4, and CMCC-CM). Three multimodel ensembles’ mean (MMEMs) are formed using the arithmetic mean of Category-I (MMEM1), Category-I and II (MMEM2), and all eight models (MMEM3). The performances of MMEMs are also assessed using the same skill tests and MMEM2 performed best which suggests evaluating the models before the formation of MMEM.

IL1RA intron 2 86-bp repeat and IL4 intron 3 70-bp repeat are VNTRs that have been associated with various diseases, but their role in obesity is elusive. The objective of this study was to investigate the association of IL1RA and IL4 VNTRs with obesity and adiposity in 315 Malaysian subjects (128 M/187 F; 23 Malays/251 ethnic Chinese/41 ethnic Indians). The allelic distributions of IL1RA and IL4 were significantly different among ethnicities, and the alleles were associated with total body fat (TBF) classes. Individuals with IL1RA I/II genotype or allele II had greater risk of having higher adiposity - even after controlling for ethnicity [Odds Ratio (OR) of I/II genotype = 12.21 (CI = 2.54, 58.79; p = 0.002); II allele = 5.78 (CI = 1.73, 19.29; p = 0.004)]. However, IL4 VNTR B2 allele was only significantly associated with overall adiposity status before adjusting for ethnicity [OR = 1.53 (CI = 1.04, 2.23; p = 0.03)]. TBF was also significantly higher in those with IL1RA II allele compared with I allele (31.79 ± 2.52 vs. 23.51 ± 0.40; p = 0.005). Taken together, IL1RA intron 3 VNTR seems to be a genetic marker for overall adiposity status in Malaysian subjects.

In the radar system, detection represents a basic and important stage in the receiver side. The detection process is based on the thresholding criteria; two philosophies of this criteria, constant and adaptive threshold. The constant threshold is simple in design, but it has a mis-detection and does not control the false alarm rate. As for the adaptive threshold, it is powerful in target detection, and better control of the false alarm rate, where it is called Constant False Alarm Rate (CFAR). Lots of research in the CFAR design, but the gap in the previous works is that there is no CFAR algorithm can be working with all or most environmental fields and all or most target situations.In this paper, The CFAR, which can work with the most environment and most of the target situations, has been presented. The producing the design and implementation of the new practical CFAR processor is presented. Where, the new CFAR is a combination of the properties of three different CFAR algorithm (CA, OSGO, and OSSO), and from two different families; averaging and statistical. Where it has overperformed of it's is 97.25% for simulation and 96.25% for the implementable version for different target situations. The simulation analysis is made by using Matlab 2015, while the implementation is done by using Xilinx Spartan 700 3a.

Oil spillage over a sea or ocean’s surface is a threat to marine and coastal ecosystems. Spaceborne synthetic aperture radar (SAR) data has been used efficiently for the detection of oil spills due to its operational capability in all-day all-weather conditions. The problem is often modeled as a semantic segmentation task. The images need to be segmented into multiple regions of interest such as sea surface, oil spill, look-alikes, ships and land. Training of a classifier for this task is particularly challenging since there is an inherent class imbalance. In this work, we train a convolutional neural network (CNN) with multiple feature extractors for pixel-wise classification; and introduce to use a new loss function, namely ‘gradient profile’ (GP) loss, which is in fact the constituent of the more generic Spatial Profile loss proposed for image translation problems. For the purpose of training, testing and performance evaluation, we use a publicly available dataset with selected oil spill events verified by the European Maritime Safety Agency (EMSA). The results obtained show that the proposed CNN trained with a combination of GP, Jaccard and focal loss functions can detect oil spills with an intersection over union (IoU) value of 63.95%. The IoU value for sea surface, look-alikes, ships and land class is 96.00%, 60.87%, 74.61% and 96.80%, respectively. The mean intersection over union (mIoU) value for all the classes is 78.45%, which accounts for a 13% improvement over the state of the art for this dataset. Moreover, we provide extensive ablation on different Convolutional Neural Networks (CNNs) and Vision Transformers (ViTs) based hybrid models to demonstrate the effectiveness of adding GP loss as an additional loss function for training. Results show that GP loss significantly improves the mIoU and F1 scores for CNNs as well as ViTs based hybrid models. GP loss turns out to be a promising loss function in the context of deep learning with SAR images.

Objective: To investigate social, economic, and environmental contributors to quit or continue smoking and vaping during the COVID-19 pandemic. Methods: A qualitative study design was adopted to identify smokers’ beliefs in a LMIC, using a small community sample. Results: 276 participants were primarily surveyed. Motivation to continue smoking included temporary pleasurable effects, working remotely, stress or anxiety, whereas a motivator to quit smoking was the overlap with COVID-19 symptomatology. There was a rise in social awareness regarding the potential harm of smoking and vaping during the pandemic yet those participants who were younger felt they were immune from its morbid complications. Conclusions: With paradoxical associations of COVID-19 with cigarette and vape usage, it is important to pay attention to biases in data in favor of educating its users of the increased risk of severe disease.

Due to the prospective local and international markets, the neon tetra fish breeding industry has its own allure for fish lovers and as a side business. The goal of the study was to analyze the opportunities and difficulties associated with neon tetra fish farming in order to build a "Blue Economy" policy. The Depok City Food Security and Fisheries Service (DKP3) program was implemented with the help of key informants who were chosen based on the following criteria: 1) DKP3 Officials, such as the Board of Trustees of the Fish Farming Group (POKDAKAN), 2) Researchers from the BRBIH (Ornamental Fish Farming Research Center), 3) Practitioners/Extension Workers, and 4) POKDAKAN.The study's conclusions state that the relevant Dinas must support local policies based on natural identification that are strengthened at the national level, that routine human resource training needs to be improved, that technology needs to be taken into account in collaboration with the private sector, and that post-harvest and market access are essential for industry. The SWOT analysis's findings, which are in quadrant 1, show that the firm is in a position for rather aggressive expansion.

Starch is considered a major nutritional factor of maize (Zea mays L.) kernels, and can be influenced by the type of endosperm. The effects of endosperm type (vitreous and non-vitreous) and type of soil (clay and sand) on the starch content of kernels of maize, and on the in vitro degradation of starch were investigated in the rumen fluid after harvesting at 6 different maturity stages during 2008 and five different maturity stages in 2009. Starch degradation, in rumen fluid, was determined after 6 h, 12 h and 20 h of incubation, using the technique of gas production. A positive linear relationship was observed during gas production (ml gas/g organic matter) and starch degradation (g kg^-1 starch) at all incubation times, with starch contents of maize kernels to a certain limit of starch accumulation (i.e. at starch contents 451-519 g/kg OM) and negative relationship afterwards. This suggests significant effects of maturity on ruminal starch degradation of maize kernels. At each harvest date, ruminal starch degradation of maize kernels was affected by crop genotype as well as soil type. The in vitro ruminal degradation potential of starch in maize kernels was influenced by the nature of the endosperm, with a higher degradation of non-vitreous kernels than of vitreous kernels. The rumen starch degradation was also influenced by type of soil, with better degradation on clay than sandy soil. For all the incubation times and maturity stages the effects of genotype, soil type and maturity stage were consistent in rumen fluid.

Anemia is a well-developed discipline where the concepts of precision medicine have, in part and being studied extensively. This review discusses the treatment of EPO-deficient anemia and resistance in Chronic Kidney Disease (CKD). Traditionally, erythropoietin-stimulating agents (ESA) and iron supplementation have been used to manage anemia in CKD. However, these treatments have potential risks, including cardiovascular and thromboembolic events. Newer treatments have emerged to address these risks, such as slow-release and low-dosage intravenous iron, oral iron, and erythropoietin-iron combination therapy. Another novel approach is using hypoxia-inducible factor prolyl hydroxylase inhibitors (HIF-PHI). This review highlights the need for precision medicine targeting genetic components of EPO-deficient anemia in CKD and discusses individual variability of genes such as the erythropoietin gene (EPO), Interleukin-β gene (IL-β), and hypoxia-inducible factor gene (HIF). Pharmacogenomics testing aims to provide targeted therapies and interventions that are tailored to the specific characteristics of an individual, optimizing treatment outcomes and minimizing resistance and adverse effects. The article concludes by suggesting the potential of receptor modification to revolutionize treatment outcome of erythropoietin deficiency anemia through integration of the mentioned approach.

We investigate new graph characteristics namely total (vertex, edge) face irregularity strength of gen- eralized plane grid graphs Gmn under k-labeling Phi of type (Alpha, Beta, Gamma). The minimum integer k for which a vertex-edge labelled graph has distinct face weights is called the total face irregularity strength of the graph and is denoted by tfs(Gmn). In this article, the graphs G = (V;E; F) under consideration are simple, fi nite, undirected and planar. We will estimate the exact tight lower bounds for the total face irregularity strength of some families of generalized plane grid graphs.

Greenwater (splashing of water on the deck) loading is a classical problem faced by the designer of ship-shaped vessels, which becomes even worst when the vessel operates at harsh weather conditions for an extended period. Installation of breakwaters on the deck can play a crucial role in minimizing this impact. However, research on the design and optimization of the breakwater is still at its infancy, and this study aims at shedding further light on this area by proposing and analyzing the effectiveness of three breakwater designs on a fixed box-shaped vessel. Commercial CFD software is used for this investigation. However, the design model (without breakwater) was validated at first against experimental results of green water splashing, before performing the actual simulations with proposed breakwater design. A vertical plate is used as the deck structure, and greenwater pressure at several locations on that plate is measured to compare the effectiveness of various breakwater designs. Overall, breakwaters with openings (perforations, grillages etc.) found to be more effective in minimizing the pressure generated by the greenwater. Nevertheless, there are significant rooms for improvement on breakwater designs, and some topics for further research are also suggested in this regard.

1) Background: A significant proportion of child laborers are compelled to work in exploitative environments, experience both deteriorating health and financial loss. The present study sought to determine the factors affecting child labour and the characteristics of their working environment. 2) Methods: A questionnaire survey was conducted with 80 child labourers aged 5 to 17 years. Alongside descriptive statistics, a newly devised technique known as Influencing Causes Index (ICI) was administered and tested. 3) Results: The startling demographic findings reveal that peak share of child labourers are young children (12-14 years) and 32.5% child laborers had never attended school. The thorough assessment of determinants reflects that not only poverty, but schooling expenses and lack of access opportunity to primary schools are also the top-ranked push factors to trigger children towards labour. Around 72.5% of children work for over 8 hours a day. A significant proportion of participants received no leave, training, or access to hygiene facilities. The existing pattern of employment and working conditions resulted in musculoskeletal pain and dermatological infections among child labourers (p&lt;0.05). 4) Conclusion: This research suggests that income measures for households, and an education programme for both children and parents would expedite the abolition of child labour.

The main objective of this paper is to introduce a further extension of extended (p, q)-beta function by considering two Mittag-Leffler function in the kernel. We investigate various properties of this newly defined beta function such as integral representations, summation formulas and Mellin transform. We define extended beta distribution and its mean, variance and moment generating function with the help of extension of beta function. Also, we establish an extension of extended (p, q)-hypergeometric and (p, q)-confluent hypergeometric functions by using the extension of beta function. Various properties of newly defined extended hypergeometric and confluent hypergeometric functions such as integral representations, Mellin transformations, differentiation formulas, transformation and summation formulas are investigated.

The recent advancements in the field of communication have led data sharing to become an integral part of today's smart cities with the evolution of concepts such as the internet of vehicles (IoV) paradigm. As a part of IoV, Electric Vehicles (EVs) have recently gained momentum as authorities have started expanding their Low Emission Zones (LEZ) in an effort to build green cities with low carbon footprints. Energy is one of the key requirements of EVs not only to support the smooth and sustainable operation of EV itself but to also ensure connectivity between the vehicles and infrastructure with controlling devices like sensors and actuators installed within an EV. In this context, renewable energy sources (such as wind energy) dramatically play their parts in the automobile sector towards designing the energy harvesting electric vehicles (EH-EV) to pare the energy reliance on the national grid. In this article, a novel approach is presented to achieve electric generation due to vehicle mobility to support the communication primitives in electric vehicles which enables plenty of IoV use cases in the presence of surplus energy at hand. A small-scale wind turbine is designed to harness wind power for converting it into mechanical power. This power is then fed to the onboard DC generator to produce electrical energy. Furthermore, the acquired power is processed through a regulation circuitry to consequently achieve the desired power supply for the end load, i.e. the batteries installed. The suitable orientation for efficient power generation is proposed on ANSYS-based aerodynamics analysis. The voltages induced by DC generator at No-Load condition are 35V while at Full-Load 25V are generated at rated current of 6.9A, along with the generation of power at around 100W (at constant voltage) at the rated speed of 90 mph for nominal battery charging. Moreover, the acquired data can be monitored via an android application interface by using a Bluetooth module.

Despite several attempts by governments and non-governmental organizations to eliminate female genital mutilation or cutting, it is puzzling that this traditional procedure is widely practiced today in many parts of sub-Saharan Africa (SSA). Scholarly arguments on the influence of female genital mutilation on sexual behavior up until now remain inconclusive. The current study sought to examine the association between female genital mutilation and early sexual initiation among girls and young women (AGYW) in SSA. Data from Demographic and Health Surveys (DHS) of 12 SSA countries were combined. A total of 30,089 AGYW (15-24 years) who had ever had sex and had complete information on all the variables of interest were considered. The outcome variable for the study was early sexual initiation. The study employed multilevel logistic regression for the data analysis, with reported odds ratio and associated 95% confidence intervals (CIs). The overall prevalence of female genital mutilation among AGYW was 49.9%, with the highest and lowest prevalence in Guinea (95.8%) and Togo (3.3%) respectively. The prevalence of early sexual initiation was 42.4%, with the highest and lowest prevalence in Niger (59.9%) and Burkina Faso (30.6%) respectively. AGYW who had not experienced female genital mutilation were less likely to have early sexual initiation [OR= 0.74, CI= 0.70-0.78], compared to those who had experienced female genital mutilation, after controlling for significant covariates. The likelihood of early sexual initiation was high among AGYW aged 15-19 [OR=2.38, CI=2.26-2.51] but low among AGYW with secondary education [AOR=0.58, CI=0.54-0.63], those who had never married [OR=0.68, CI=0.60-0.78], those in households with richest wealth quintile [OR=0.64, CI=0.57-0.72], those who were exposed to mass media [OR=0.88, CI=0.83-0.93], and those working [OR=0.91, CI=0.87-0.96]. Not undergoing female genital mutilation in the midst of socio-economic factors (e.g., education level, household wealth) could limit AGYW from early sexual debut. These findings underscore the need for effective campaign and programs (e.g., educational programs, entrepreneurial training, micro-finance schemes) against the practice of female genital mutilation. Policy interventions (e.g., “schooling for the girl-child” initiatives) that might delay early sexual initiation among adolescent girls and young women in the midst of identified socio-economic factors should be developed.

The partial discharge (PD) event in high voltage insulation releases energy, exerts mechanical pressure, and generates elastic waves. Detecting and locating these PD events through short-duration acoustic pulses is well-established, particularly in gas-insulated systems and oil-insulated transformers. However, its full potential remains untapped in solid insulation systems, where the propagation capability of acoustic pulse and the acoustic reflections pose fundamental challenges to the Acoustic Emission (AE) detection technique. This study investigates the influence of reflections and multiple paths on the propagating acoustic pulse in polymeric insulating materials using a finite element method (FEM) in COMSOL. It was observed that the reflections from the boundary influence the propagating pulse's shape, peak magnitude, and arrival time. An analytical MATLAB model further quantifies the impact of multiple propagation paths on the shape, magnitude, and arrival time of the pulse travelling in a cylinder. Additionally, a Perfect Matched Layer (PML) was implemented in the COMSOL model to eliminate reflections from the boundary, and it revealed that the acoustic pulse magnitude decreases with distance following the inverse square law. In essence, the models aid in measuring how reflections contribute to the observed signals, facilitating the precise identification of the source of the PD event in the tested system.

This bibliometric analysis delves into the realm of botanical gardens through the process of mapping literature and discerning research frontiers, underlying themes, and interconnections within the extant body of knowledge. The study uses a dataset of 1340 publications and employs methodologies such as authors' keywords co-occurrence data to examine the discipline's trends, patterns, and knowledge gaps. The study finds significant growth in literature from 1960 to 2023, emphasizing botanical gardens, conservation, taxonomy, biodiversity, ex-situ conservation, and diversity. Key influencers such as Sanja Kovačić, Elaissi, and Chemli have steered research directions towards ex-situ conservation and essential oils, reflecting the field's interdisciplinary nature. The study shows global institutional variation, with entities like the Chinese Academy of Sciences, the Royal Botanic Gardens UK, and the New York Botanical Garden US leading the discourse. Thematic analyses have identified core themes and emerging research topics, with ecological restoration, essential oils, invasive species, and climate change mirroring the field's expanding scope. The consistent prevalence of themes such as 'botanical gardens' and 'conservation' over time underscores their enduring significance. Emerging topics like climate change and biodiversity are gaining prominence, signaling a shift in research priorities. The expanding array of subjects, including 'invasive species' and 'genetic diversity,' indicates an amplified scope and growing complexity in botanical garden research. This study aims to bridge a crucial gap by outlining the developmental trajectory of botanical gardens and offering guidance for future research directions. Diverse research domains within botanical garden studies, including biodiversity, essential oils, taxonomy, and ex-situ conservation, present extensive avenues for exploration. Future research endeavors should delve into these impactful themes to better understand botanical ecosystems and their conservation. The study emphasizes the importance of nurturing interdisciplinary collaborations and multidisciplinary projects, advocating for a comprehensive and collaborative approach to future research in botanical garden studies.

In this article we compute many topological indices for the family of Möbius ladder. At first we give general closed form of M-polynomial of this family and recover many degree based topological indices out of it. We also compute Zagreb indices and Zagreb polynomials of this family.

In this paper, we employ fuzzy Sumudu transform for solving system of linear fuzzy differential equations with fuzzy constant coefficients. The system with fuzzy constant coefficients is interpreted under strongly generalized differentiability. For this purpose, new procedures for solving the system are proposed. A numerical example is carried out for solving system adapted from fuzzy radioactive decay model. Conclusion is drawn in the last section and some potential research directions are given.