The manuscript presents a novel approach to designing and fabricating a stretchable patch antenna designed for strain sensing and wireless communication of sensing data at the same time. The challenge lies in combining flexible and stretchable textile materials with different physical mor-phologies, which can hinder adhesion among multiple layers when stacked up, resisting the overall stretchability of the antenna. The proposed antenna design overcomes this challenge by incorpo-rating a lattice hinge pattern in the non-stretchable conductive e-textile, transforming it into a stretchable structure. The innovative design includes the longitudinal cuts inserted in both the patch and the ground plane of the antenna, allowing it to stretch along in the perpendicular direction. Implementing the lattice hinge pattern over the conductive layers of the proposed patch antenna in combination with a 2 mm thick Polydimethylsiloxane (PDMS) substrate achieves a maximum of 25% stretchability compared to its counterpart antenna without lattice hinge design. The stretchable textile antenna resonates around a frequency of 2.45 GHz and exhibits a linear resonant frequency shift when strained up to 25%. This characteristic makes it suitable for use as a strain sensor. Ad-ditionally, the lattice hinge design enhances the conformability and flexibility of the antenna compared to a solid patch antenna. The realized antenna gains in the E and H-plane were measured as 2.21 dBi and 2.34 dBi, respectively. Overall, the presented design offers a simple and effective solution for fabricating a stretchable textile patch antenna for normal use or as a sensing element, opening up possibilities for applications in communication and sensing fields.

The Chiltan Formation is a potential hydrocarbon-producing reservoir in the Indus Basin, Pakistan. However, its diagenetic alterations and heterogeneous behavior lead to significant challenges in accurately characterizing the reservoir and production performance. This manuscript aims to utilize Chiltan Limestone core samples to conduct a detailed analysis of the diagenetic impacts on reservoir quality. The formation evaluation was carried out through thin section analysis, SEM-EDS and FTIR investigation, as well as plug porosity and permeability measurements under different stress conditions. In results, Petrography revealed three microfacies with distinct diagenetic features and micro-nano fossil assemblages, including intraclasts, pelloids, bioclasts, and stylolites. Diagenesis has a significant impact on petrophysical properties, leading to increased reservoir heterogeneity. The specified depositional environment exposed the alteration of the Chiltan formation during distinct diagenetic phases in marine, meteoric, and burial settings. Pore morphology and mineralogy reveals complex micro-pore structure with various carbonate mineral phases and cement types in the formation samples. The average porosity and permeability of the core samples were found to be 3.4% and 0.449 mD respectively, indicating poor reservoir quality. Stress sensitivity was determined using Klinkenberg corrected permeability, which indicated a reduction in measured and absolute permeability due to increasing confining stress, further reducing the pore throat structure of the formation. In conclusion, the Chiltan formation possesses intricate reservoir heterogeneity and varied micro-pore structure caused by diagenesis and depositional settings. The formation is classified as a low-quality reservoir due to its non-uniform pore geometry, which exhibits low petrophysical properties resulting from overburden stress. The results of this study provide solid foundation in reservoir characterization and quality assessment which has implications for exploring and exploitation of indigenous resources.

Aim: aim of this study is to evaluate the clinical and radiographic healing after repairing mechanical furcal perforations that occurred in primary molars by using MTA (Mineral Trioxide Aggregate) and search in some factors that may affect the prognosis of the treatment. Materials & Methods: we had 34 primary molars in 32 children aged 5–10 years, were treated by using MTA material after the occurrence of furcal perforation during pulpotomy procedure. Cases had been followed clinically and radiographically within 12 months. Statistical analyses were performed at p-value = 0.05. Results: All teeth were asymptomatic at the first week. Overall success rate was 79.3%. There was no significant statistically differences between overall-success rates according to the perforation size and continues bleeding in the furcation area (p-value > 0.05). Conclusions: Iatrogenic furcal perforations that may occur during pulpotomy in primary molars can be treated successfully by using MTA, and small sized-perforations may have more favorable prognosis than the large ones. Iatrogenic furcal perforations that may occur during pulpotomy in primary molars can be treated successfully by using MTA, and small sized- perforations may have more favorable prognosis than the large ones.

In addition to the traditional QoS metrics of delay, delay jitter, and packet loss probability (PLP), Quality of Experience (QoE) is now widely accepted as a numerical proxy for actual user experience. The literature has reported many mathematical mappings between QoE and QoS. These QoS parameters are measured by the network providers using sampling. There are some papers studying sampling errors in QoS measurements; however there is no account of propagation of these sampling errors to QoE evaluation. In this paper, we used industrially acquired measurements of PLP and jitter to evaluate the sampling errors and correlation in measurements. Focussing on Video-on-demand (VoD) applications, we use subjective testing and regression to map QoE metrics onto PLP and jitter. The resulting mathematical functions of QoE and theory of error propagation was used to evaluate the propagated error in QoE, and this error was represented as confidence interval. Using the guidelines of UK government for sampling, our results indicate that confidence intervals around estimated QoE in a busy hour can be between MOS=1 to MOS=5 at targeted operating point of QoS parameters. These results are a new perspective on QoE evaluation, and are of great significance to all organisations that need to estimate the QoE VoD applications precisely.

The wettability of the oil-brine-rock systems is very challenging mainly for the carbonate reservoirs and it plays a significant role to enhance the oil recovery (EOR). Carbonate rocks are mad-up of complex lithology, hence these requires careful treatments in controlling their wetting behavior for enhanced oil recovery. Therefore, it is extremely important to modify their wettability from an oil-wet rock behavior to a water-wet so that the residual oil can be produced efficiently. Thus, the present study has examined the effectiveness of alumina nanofluid as well as a new chemical methyl blue to alter the wettability. The methyl blue is released on massive scale from various industries i.e. pharma, textile and food industry which is a key environmental concern which contaminates the water table. Hence the study, explores the effects of MB and alumina nanofluid on the wettability. The effect of nanofluids formulated via dispersing the alumina nanoparticles in aqueous solutions at various concentration (0. 0.05, 0.3, 0.50, 0.75 and 1.0 wt. %) were tested for wettability modification under different physio-thermal conditions. Subsequently, the wettability change was examined for the samples treated with different concentrations of MB (10, 15, 30, 50 and 100 mg/L) for 7-days at two different temperatures of (25 and 50 0C). The results showed that hydrophobicity of the SML carbonate rock has significantly reversed while treating with alumina nanofluids and MB. Thus, the wettability modification/reversal via treatment of MB and alumina nanofluid can be an effective mechanism to hydrogen injection and for EOR processes.

This paper investigates the tank drainage problem of an isothermal, unsteady, incompressible electrically conducting Power law fluid. Analytic solution have been obtained from governing continuity and momentum equations subject to appropriate boundary conditions by using Perturbation method. The Power law fluid model solution without MHD is retrieved from this proposed model on substitution . Declaration on behalf of velocity profile, volume flux, average velocity, connection of time with respect to length of the tank and requirement of time for whole drainage of fluid are acquired. Special effects of numerous emerging parameter’s on velocity profile vz and depth of the fluid in the tank are graphically presented. Keywords: Tank drainage, Power law MHD fluid, Analytical solution.

To build a stable power factor and high output accuracy, it should use balanced active and reactive power, also used ultrasonic PWM was used with the frequencies (20–500 kHz). I also used a three-phase dynamic load at the output system and was connected to the compound splicing (CS) system this is a novelty. An oscillator circuit with 4Ghz as a microcontroller is a novelty, and designing ADC is utilized to increase accuracy, as well as contribute to the reduction of loss brought on by the characteristics of voltage source inverters (VSI), such as dead time determined by the excess voltage or voltage drop in the inverter, circumstances abnormal to the load current, such as short circuit current in the production phase, and so forth. The innovation relates to the inverter's load sensing circuit, current smoothing during operation, reaction, spontaneous power factor enhancement of the inverter, and correction of reactive power of passive devices. This invention contributes to the advancement of D.C to A.C power converter by the achievement of extremely low losses, excellent precision, and lightweight construction. Additionally, the accuracy ranges from 99%, and the total harmonic distortion (THD) of the voltage and current is (0.1%-0.8%). We Power MOSFET are used, along with FPGA to improve control over the creation of ultrasonic PWM signals, the programmable peripheral interface (PPI) 8255A for regulatory work. The marks serve as proof of this.

Ghana Tamale's current waste management system is overwhelmed by the growing waste crisis, necessitating the exploration of Waste-to-Energy technologies as an innovative solution. This study explores challenges and opportunities for integrating Waste-to-Energy (WtE) technologies into Tamale's existing waste management system. Qualitative research identified policy hurdles, financial constraints, social concerns, and institutional weaknesses as key barriers. Conversely, stakeholder collaboration, public education, and capacity building emerged as some success fac-tors. A proposed implementation plan emphasizes feasibility studies, public engagement, pub-lic-private partnerships (PPPs), and technology selection based on waste composition. Addition-ally, a novel framework for WtE integration within a broader Integrated Solid Waste Manage-ment (ISWM) system is presented. This framework incorporates waste sorting, recycling, WtE alternatives, and responsible management of residuals. Validation by key stakeholders con-firmed the framework's potential to improve waste management in Tamale. By overcoming identified challenges and implementing the proposed framework, Tamale can achieve environ-mental sustainability, energy generation, and progress towards UN SDGs 7, 11, and 12. This re-search offers valuable insights for policymakers and paves the way for a cleaner and more sus-tainable future for Tamale, potentially serving as a model for other developing cities.

This paper presents a method to detect and classify the high impedance fault that occur in the medium voltage distribution network using discrete wavelet transform (DWT) and adaptive neuro-fuzzy inference system (ANFIS). The network is designed using Matlab software and various faults such as high impedance, symmetrical and unsymmetrical fault have been applied to study the effectiveness of the proposed ANFIS classifier method. This is achieved by training the ANFIS classifier using the features (standard deviation values) extracted from the three phase fault current signal by DWT technique for various cases of fault with different values of fault resistance in the system. The success and discrimination rate obtained for identifying and classifying the high impedance fault from the proffered method is 100% whereas the values are 66.7% and 85% respectively for conventional fuzzy based approach. The results indicate that the proposed method is more efficient to identify and discriminate the high impedance fault accurately from other power system faults in the system.

Desalination accounts for 1% of the total global water consumption and is an energy-intensive process, with the majority of operational expenses attributed to energy consumption. Moreover, at present, a significant portion of the power comes from traditional fossil fuel-fired power plants and the greenhouse gas emissions associated with power production along with concentrated brine discharge from the process, pose a severe threat to the environment. Due to the dramatic impact of climate change, there is a major opportunity to develop sustainable desalination processes to combat the issues of brine discharge, greenhouse gas emissions along with a reduction in energy consumption per unit of freshwater produced. Nanotechnology can play a vital role to achieve specific energy consumption reduction as nanofluids application increases the overall heat transfer coefficient enabling the production of more water for the same size desalination plant. Furthermore, concentrated brine discharge harms the marine ecosystems, and hence, this problem must also be solved to support the objective of sustainable desalination. Several studies have been carried out in the past several years in the field of nanotechnology applications for desalination, brine treatment and the role of renewable energy in desalination. This paper aims to review the major advances in this field of nanotechnology for desalination. Furthermore, a hypothesis for developing an integrated solar thermal and nanofluid sustainable desalination system, based on the cyclic economy model is proposed.

This paper presents the methodology to detect and identify the type of fault that occurs in shunt connected static synchronous compensator (STATCOM) transmission line using a combination of Discrete Wavelet Transform (DWT) and Naive Bayes classifier. To study this, the network model is designed using Mat-lab/Simulink. The different faults such as Line to Ground (LG), Line to Line (LL), Double Line to Ground (LLG) and three-phase (LLLG) fault are applied at different zones of system with and without STATCOM considering the effect of varying fault resistance. The three-phase fault current waveforms obtained are decomposed into several levels using daubechies mother wavelet of db4 to extract the features such as standard deviation and Energy values. The extracted features are used to train the classifiers such as Multi-Layer Perceptron Neural Network (MLP), Bayes and Naive Bayes (NB) classifier to classify the type of fault that occurs in the system. The results reveal that the proposed NB classifier outperforms in terms of accuracy rate, misclassification rate, kappa statistics, mean absolute error (MAE), root mean square error (RMSE), relative absolute error (RAE) and root-relative square error (RRSE) than MLP and Bayes classifier.

Background: CK-18 is a serological marker of apoptosis that has been widely associated with fibrosis and steatosis in NASH. Many studies have showed association CK-18 levels with NAFLD. To date, there is a profound lack of rheumatology studies on the effect of MTX therapy with regard to CK-18 levels. The relationship between CK-18 levels and cumulative MTX dose, MTX treatment duration, weekly MTX dose is not available in the literature. Objectives: The main purpose of this study was to determine the relationship between serum cytokeratin-18 (CK-18) and cumulative methotrexate dose in rheumatology patients on methotrexate (MTX) therapy. Besides, we studied the correlations between CK-18 and clinical parameters including age, disease duration , duration of MTX therapy, cumulative steroid dose and biochemical parameters such as alanine transaminase (ALT) and aspartate aminotransferase AST). Methods : We recruited 79 rheumatology patients on methotrexate (MTX) therapy as MTX group and 38 patients not on MTX therapy as non-MTX group . All subjects were tested for their serum CK-18 levels using an enzyme-linked immunosorbent assay (ELISA) test. We identified 20 patients with the highest CK-18 levels and 20 patients with the lowest CK-18 levels and had ultrasound liver performed on them. Results : The median serum CK-18 levels were marginally higher among the patients on MTX (1.20 ng/mL [0.19-37.15]) compared to the non-MTX group (1.17 ng/mL [0.37-34.32]). There was a significantly positive relationship between serum CK-18 levels and cumulative MTX dose (r = 0.329, p = 0.003) and total duration of MTX therapy (r = 0.284, p = 0.011). Apart from the above-mentioned variables, the CK-18 levels in MTX group significantly correlated with age (r = 0.265, p = 0.018), ALT (r = 0.440, p = <0.001) and AST (r = 0.478, p= 0.004). Ultrasound liver findings showed median CK-18 levels was higher among patients with abnormal liver findings although statistical significance was not reached. Conclusion : Among patients on MTX therapy, serum CK-18 levels correlated positively with cumulative MTX dose , total duration of MTX treatment , ALT and AST levels. These findings are preliminary and requires validation by future studies in the field of rheumatology.

Polyhydroxyalkanoate (PHA) co-polymers show relatively higher in vivo degradation rate compared to other PHAs thus they received a great deal of attention for a wide range of medical applications. Nanoparticles (NPs) loaded with poorly water soluble anticancer drug docetaxel (DCX) were produced using poly 3-hydroxybutyrate-co-4-hydroxybutyrate, P(3HB-co-4HB), co-polymers biosynthesised from Cupriavidus sp. USMAA1020 isolated from Malaysian environment. Three co-polymers with different molar proportions of 4-hydroxybutirate (4HB) were used: 16% (PHB16), 30% (PHB30) and 70% (PHB70) 4HB-containing P(3HB-co-4HB). Blank and DCX loaded nanoparticles were then characterized for their size and size distribution, surface charge, encapsulation efficiency and drug release. Pre-formulation studies showed that an optimised formulation could be achieved through the emulsification/solvent evaporation method using PHB70 with the addition of 1.0% PVA, as stabilizer and 0.03% VitE-TPGS, as surfactant. DCX-loaded PHB70 nanoparticles (DCX-PHB70) gave the desired particle size distribution in term of average particles sizes around 150 nm and narrow particle size distribution (PDI below 0.100). The encapsulation efficiencies result showed that at 30% w/w drug-to-polymer ratio: DCX- PHB16 NPs were able to encapsulate up to 42% of DCX; DCX-PHB30 NPs encapsulated up to 46% of DCX and DCX-PHB70 NPs encapsulated up to 50% of DCX within the nanoparticles system. Approximately 60% of DCX was released from the DCX-PHB70 NPs within 7 days for 5%, 10% and 20% of drug to polymer ratio while for the 30% and 40% drug to polymer ratios, an almost complete drug release (98%) after 7 days of incubation was observed.

MCrAlYHf bond coats are employed in jet and aircraft engines, stationary gas turbines, and power plants, which require strong resistance to oxidation at high temperatures. The oxidation behavior of a free-standing CoNiCrAlYHf coating was investigated in this study. Isothermal oxidation tests were performed in air at 1050 °C on the specimens with various levels of surface roughness to investigate the oxidation kinetics. X-ray diffraction, focused ion beam, scanning electron microscopy (SEM), and scanning transmission electron microscopy were used to characterize the surface oxides. The surface roughness was examined using a contact profilometer and SEM. An empirical model was proposed to elucidate the impact of surface roughness on the oxidation behavior based on the correlation between the surface roughness level and oxidation rates.

The need for cohesive detection and defence methods against cyberattacks is significant now more than ever before to enforce security and privacy of user data and information. The inevitable increase in demand for home and flexible working from employees quite recently has meant there is a lack of awareness and training for cyberattacks. Hence, they have become prominent as attackers are aware of this and are benefitting from individuals’ lack of knowledge in how to better protect themselves and their confidential information. Employees are becoming more susceptible to such attacks and falling victim to these, resulting in economic losses for companies, data losses and decreased faith.

The graphene based highly conductive and flexible devices has received momentous attraction and growth in recent years for potential multifunctional uses. The development of flexible and washable textile sensors, actuators, energy storage and energy harvesting systems. Textile fabrics coated with graphene and conductive polymers have been used for wearable self-powered e-textiles, such as tribo-electric, piezoelectric, and Thermoelectric. Herein this research, 100% woven cotton fabric is Fictionalized with graphene oxide (GO) using industrial-scale cold pad batch dyeing technique for the development of low-grade body heat into self-powered wearable e-textiles. The conductive polymer PEDOT: PSS was coated using layer by layer approach. The study demonstrates that the resultant textile electrodes showed reduced electrical sheet resistance from 2.5 MΩ to 15KΩ, with a reduced graphene oxide and further reduced to (2.5 -12.5 Ω) for conductive polymer. The sheet resistance was decreased with the number of dyeing cycles (10-15) and increased with 20 washing cycles vice versa. The study demonstrates that the sensor response and performance were improved with increasing the content percent of rGO and PEDOT: PSS. The tensile strength of as coated fabric electrodes was improved from (25.0-85.5 mPa) and fabric thickness was increased to (26-38µm) without compromising or influencing the air permeability. The resultant textile electrodes may potentially be used in smart textiles for self-powered flexible wearable generators, sensors, and energy storage. The study demonstrates that the cold pad batch dyeing method is a suitable and effective method for the fabrication of graphene-based textiles.

Diabetes mellitus (DM) is one of the most prevalent metabolic disorders. In order to replace the function of the destroyed pancreatic beta cells in diabetes, islet transplantation is the widely practiced treatment; however, it has several limitations. As an alternative approach, human pluripotent stem cells (hPSCs) can provide an unlimited source of pancreatic cells that have the ability to secrete insulin in response to high blood glucose level. However, determination of the appropriate pancreatic lineage candidate for the purpose of cell therapy for treatment of diabetes is still debated upon. While hPSC-derived beta cells are perceived as the ultimate candidate, the efficiency needs further improvement in order to obtain a sufficient number of glucose responsive β-cells for transplantation therapy. On the other hand, hPSC-derived pancreatic progenitors can be efficiently generated in vitro and can further mature into glucose responsive beta cells in vivo after transplantation. Herein, we discuss the advantages and predicted challenges associated with the use of each of the two pancreatic lineage products for diabetes cell therapy. Furthermore, we address co-generation of functionally relevant islet cell subpopulations and structural properties contributing to glucose responsiveness of beta cells, as well as the available encapsulation technology for these cells.

Due to an increase of the monocrystalline PV systems installations, for a drive towards the sustainable smart cities in the hot arid developing country such as Pakistan, pose challenges of the performance and degradation issues. Monocrystalline PV module efficiencies are declining and damaging under the continuous exposure to higher surface day-time temperatures in the different parts of the country. A MATLAB simulations were performed based on the validated mathematical approach. This paper investigates the hot arid surface temperature impacts on the performance of PV modules during the summer and winter seasons in Pakistan. The investigations are performed examining the power generating efficiency of the PV system. This paper also investigates the influence of installations of PV-system in the North, South, East and West regions of Pakistan. It was examined that the northern areas of Pakistan are more suitable for maintaining the long-term durability of the PV system. Investigations are performed for the peak summer and peak winter days. During summer months, cooling strategies have to be implemented to overcome the heating effects whilst reducing degradation effect on installed PV-system.

The 21st century, where all things are depending upon technology, almost all the human tasks are being done with the help of technology to save a lot of time and make our life much more comfortable. The monitoring of students’ attendance is a crucial task for faculty in today’s world. There are more chances of errors while entering the students’ attendance records in the primary system, primarily when the class was over. The main concern of this study is to build an IoT-based automated attendance management system for educational institutes by biometric recognition to incorporate fake/proxy attendance and errors of entry and to replace old manual methods of taking students’ attendance by calling their names or roll numbers. The AAS will click the image of the classroom, and it will automatically detect the faces of students sitting in the lecture room and recognize them during lectures then mark their attendance daily to keep a record of their presence and also maintain and manage it for the management staff of the institution for future by using web services.

Solar photovoltaic systems are becoming increasingly popular due to their outstanding environmental, economic, and technical characteristics. To simulate, manage, and control photovoltaic (PV) systems, the primary challenge is identifying unknown parameters accurately and reliably as early as possible using a robust optimization algorithm. This paper proposes a newly developed cheetah optimizer (CO) and improved CO (ICO) to extract parameters from various PV models. This algorithm, inspired by cheetah hunting behavior, includes several basic strategies: searching, sitting, waiting, and attacking. Although this algorithm has shown remarkable capabilities in solving large-scale problems, it needs improvement concerning its convergence speed and computing time. Here, an improved CO (ICO) is presented to identify solar power model parameters for this purpose. Single-, double-, and PV module models are investigated to test ICO's parameter estimation performance. Statistical analysis uses minimum, mean, maximum, and standard deviation. Furthermore, to improve confidence in test results, Wilcoxon and Freidman rank nonparametric tests are also performed. Compared to other state-of-the-art optimization algorithms, the ICO algorithm is proven to be highly reliable and accurate when identifying PV parameters.

COVID-19 infection is extremely dangerous for persons with comorbidities such as kidney disease and diabetes. Although many people of all ages and socioeconomic backgrounds have suffered due to this pandemic, those with underlying medical conditions like kidney disease and diabetes are more vulnerable to becoming infected with COVID-19 related to weak immunity. However, the role of vaccination in the co-infection of COVID-19 with diabetics is not available in the literature. Therefore, we examine the unique challenges presented by the co-infection of COVID-19 in individuals with diabetes, focusing on its disease transmission dynamics. A mathematical modelling technique is to be employed in this work to analyse the dynamics of COVID-19 outbreaks with seven compartments, including vaccination with comorbidities such as diabetes. We also investigated analytically by displaying the solutions' existence, boundedness, positivity and sensitivity. After calculating the basic reproduction numbers, the stability analysis of model equilibrium points is also covered. If the reproduction numbers are less than unity, the disease-free equilibrium points of the model appear to be both locally and globally stable. The findings of this study are that as the vaccination rate rises, the incidence of COVID-19 and its co-infections with diabetes decreases. Effective disease treatment strategies may be based partly on the possible impact of vaccination on the co-infection of COVID-19 related to diabetic disease insights.

Soil salinity is one of the most serious problems for achieving better crop growth and yield. The study was conducted to isolate, characterize and screen salt tolerant microbes from spinach grown in saline soils. The efficient salt tolerant microbes were characterized for beneficial traits such as nitrogen fixation, phosphate solubilization, indoleacetic acid (IAA), biofilm production, catalase and antagonistic activities, salt tolerance and optimization of bacterial fermentation. Molecular identification of potential microbes was done by 16S rRNA gene sequencing. The collected soil samples were moderately to strongly saline, alkaline in nature, low in N and P while adequate in K and Ca concentration. A total of 17 salt tolerant bacteria differing in colony and cell morphology were characterized. All isolated rhizobacterial microbes had capability to biosynthesize phytohormone IAA, 14 were able to fix atmospheric N2, 11 microbes solubilized inorganic P, 10 produced biofilm and 15 were positive in catalase activity. The isolated rhizobacteria showed salt tolerance up to 10 % induced salinity, only six microbes tolerated salt concentration of 12.5% however, none of any rhizobacteria remained viable at 15% NaCl amended media plates. The two potential salt tolerant microbes (NIA SP-6 & NIA SP-11) were screened and found for optimum growth curve and fermentation at pH 7.0 after 48 hrs of incubation period. Both potential microbes were identified as Enterobacter cloacae (NIA SP-06) and Bacillus safensis (NIA SP-11). Hence, it can be concluded that isolated salt tolerant rhizobacterial microbes have potential for beneficial traits and have ability for salt tolerance under saline conditions.

Long-term durability of the vacuum edge-seal plays a significant part in retrofitting triple vacuum glazing (TVG) to existing buildings in achieving towards zero-energy buildings (ZEB) target. Vacuum pressure decrement with respect to time between panes affect the thermal efficiency of TVG. This study reports a 3D finite element model, with validated mathematical methods and comparison, for the assessment of the influence of vacuum pressure diminution on the thermal transmittance (U value) of TVG. The centre-of-pane and total U values of TVG calculated to be 0.28 Wm⁻²K⁻¹ and 0.94 Wm⁻²K⁻¹ at the cavity vacuum pressure of 0.001 Pa. The results suggests that a rise in cavity pressure from 0.001 Pa to 100 kPa increases the centre-of-pane and total U values from 0.28 Wm⁻²K⁻¹ and 0.94 Wm⁻²K⁻¹ to 2.4 Wm⁻²K⁻¹ and 2.58 Wm⁻²K⁻¹, respectively. The temperature descent on the surfaces of TVG between hot and cold sides’ increases by decreasing the cavity vacuum pressure from 50 kPa to 0.001 Pa. To maintain the cavity vacuum pressure of 0.001 Pa for over 20 years of life span in the cavity of 10 mm wide edge sealed triple vacuum glazing, non-evaporable getters will maintain the cavity vacuum pressure that will enable the long-term durability to TVG.

Thermoplastic pultrusion is a suitable process for fabricating continuous unidirectional thermoplastics with a uniform cross-section, high mechanical properties due to continuous fiber reinforcement, low cost, and suitability for mass production. In this paper, jute and glass fibers were reinforced with a polypropylene matrix and fabricated using the thermoplastic pultrusion process. The volumetric fraction of the composite was designed by controlling the filling ratio of the reinforcing fiber and matrix. The effects of molding parameters were investigated, such as pulling speed and molding temperature, on the mechanical properties and microstructure of the final rectangular profile composite. The pulling speed and molding temperature were varied from 40 to 140 mm/min and 190 to 220°C, respectively. The results show that an increase in molding temperature initially led to an increase in mechanical properties, up to a certain point. Beyond that point, they started to decrease. The increase in molding temperature also led to an increase in void content. Meanwhile, un-impregnation decreased with the increase in molding temperature, and the jute fiber began to degrade at high temperatures. In the next step, with varying pulling speed, the mechanical properties decreased as the pulling speed increased, with a corresponding increase in void content and un-impregnation. The decrease in mechanical properties was influenced by the increase in void content and un-impregnation, as the jute fiber degraded at higher temperatures.

Drones are increasingly becoming a ubiquitous feature of society. They are being used for a multiplicity of applications for military, leisure, economic, and academic purposes. Their application in the latter, especially as social science research tools has seen a sharp uptake in the last decade. This has been possible due, largely, to significant developments in computerization and miniaturization which have culminated in safer, cheaper, lighter, and thus more accessible drones for social scientists. Despite their increasingly widespread use, there has not been an adequate reflection on their use in the spatial social sciences. There is need a deeper reflection on their application in these fields of study. Should the drone even be considered a tool in the toolbox of the social scientist? In which fields is it most relevant? Should it be taught as a course in the universities much in the same way that geographic information system (GIS) became mainstream in geography? What are the ethical implications of its application in the spatial social science? This paper is a brief reflection on these questions. We contend that drones are a neutral tool which can be good and evil. They have actual and potential wide applications in academia but can be a tool through which breaches in ethics can be occasioned given their unique abilities to capture data from vantage perspectives. Researchers therefore need to be circumspect in how they deploy this powerful tool which is increasingly becoming mainstream in the social sciences.

Detecting, tracking, and classifying unmanned aerial vehicles (UAVs) in a swarm presents significant challenges due to their small and diverse radar cross-sections, multiple flight altitudes, velocities, and close trajectories. To overcome these challenges, adjustments of the radar parameters and/or position of the radar (for airborne platforms) are often required during runtime. The runtime adjustments help to overcome the anomalies in the detection, tracking, and classification of UAVs. The runtime adjustments are performed either manually or through fixed algorithms, each of which can have its limitations for complex and dynamic scenarios. In this work, we propose the use of multi-agent reinforcement learning (RL) to carry out the runtime adjustment of the radar parameters and position of the radar platform. The radar used in our work is a multibeam multifunction phased array radar (MMPAR) placed onboard UAVs. The simulations show the cognitive adjustment of the MMPAR parameters and position of the airborne platform using RL helps to overcome anomalies in the detection, tracking, and classification of UAVs in a swarm. A comparison with other artificial intelligence (AI) algorithms shows that RL performs better due to runtime learning of the environment through rewards.

This article aims to reflect upon the relevance of Decolonization methodologies with the Theses on Feuerbach. Somehow, all the Indigenous scholars started from new Marxist like Paulo Freire, Frantz Fanon, but not from classic Marx. To us, the German Ideology of young Marx only resembles the pioneering sources of Indigenous methodology. This discussion is thus a reflection of our studies and a philosophic endeavor to talk about the marginal people of the world, and the scholars who engaged in and with the oppressed. However, we are not prepared to turn our attention away from all the vastness of Marx to a collection of potentially equally relevant to Indigenous methodology. This article concludes that the Theses on Feuerbach is the core of Marxist archaeology of knowledge or philosophy as a whole and has been wading in the Indigenous paradigm.

Introduction: COVID-19 pandemic has affected HCPs in multiple way. It has caused psychological impact in form of anxiety, depression, and insomnia. In this study, we aim to study and compare the stress level, anxiety and depression among HCPs who are posted in special COVID-19 units with the HCPs who are not posted in COVID-19 units.Methods: This cross-sectional study was conducted in June 2020, at various hospitals of Karachi, Pakistan. All health care professionals (HCPs) were invited to participate. A total of 301 HCPs completed this study, who were divided into two groups; those who are posted in COVID-19 ward (Group A) and those who are not (Group B). Psychological Impact was English version of the Depression Anxiety Stress Scale - 21 (DASS-21).Results: In Group A, 70.5% had moderate, severe, or extremely severe depression compared to 49.2% in group B. In Group A, 75.4% had moderate, severe, or extremely severe anxiety compared to 44.7% in group B. In Group A, 80.3% had moderate, severe or extremely severe stress compared to 54.2% in group B. Anxiety, depression and stress were significantly higher in HCPs who were posted in COVID-19 ward compared to those who were not posted in COVID-19 wardConclusion: There was significantly higher anxiety, stress and depression in health care professionals posted in COVID-19 ward. Both the government and health care agencies should take responsibility for protecting the psychological well-being of health care communities all over the world and ensuring a healthy work environment.

Diabetes mellitus (DM) comprises a range of metabolic disorders characterized by high blood glucose levels caused by defects in insulin release, insulin action, or both. DM is a widespread condition that affects a substantial portion of the global population, causing high morbidity and mortality rates. The prevalence of this major public health crisis is predicted to increase in the forthcoming years. Although, several drugs are available to manage DM, these are associated with adverse side effects, which limits their use. In underdeveloped countries, where such drugs are often costly and not widely available, many people continue to rely on alternative traditional medicine, including medicinal plants. The latter serve as a source of primary healthcare and plant-based foods in many low and middle-income countries. Interestingly, many of the phytochemicals they contain have been demonstrated to possess antidiabetic activity such as lowering blood glucose levels, stimulating insulin secretion and alleviating diabetic complications. Therefore, such plants may provide protective effects that could be used in the management of DM. The purpose of this article was to review the medicinal plant-based foods traditionally used for the management of DM, including their therapeutic effects, pharmacologically-active phytoconstituents and antidiabetic mode of action at the molecular level. It also presents future avenues for research in this field.

The effect of Localized Surface Plasmon (LSP) of 5 nm mean size Au particles deposited on TiO2 P25 was investigated during the photo-thermal water gas shift reaction (WGSR). The effects of CO concentration, excitation light flux and energy, and molecular oxygen addition during the reaction were investigated. The photocatalytic WGSR rate under light excitation with wavelengths extending from 320 to 1100 nm was found to be higher than the thermal reaction alone at the same temperature (85 oC). A ratio H2/CO2 of near unity was found at high concentrations of CO. Addition of molecular oxygen during the reaction resulted in a slight decrease of molecular hydrogen production while the rates of CO2 formation and that of CO consumption changed by one order of magnitude. More important, it was found that the WGSR rates were still high under only visible light excitation (600 - 700 nm). The results prove that Au LSP alone triggers this chemical reaction without the need to excite the semiconductor on which they are deposited.

Mangifera indica (mango), a member of the Anacardiaceae family, is renowned for its diverse pharmacological properties, encompassing antidiabetic, antioxidant, antiviral, cardiotonic, hypotensive, and anti-inflammatory effects. The present study delves the insulin-releasing and glucose-lowering potential of the ethanolic extract of Mangifera indica (EEMI) leaves in streptozotocin (STZ)-induced type 2 diabetic rats, concurrently investigating its phytoconstituents. EEMI's effects on insulin secretion were measured using BRIN BD11 β-cells and isolated mouse islets. It’s enzymatic inhibitory properties on carbohydrate digestion, glucose absorption, and free radicals were investigated using starch digestion, glucose diffusion and DPPH assay methods. In-vivo parameters including lipid profile and liver glycogen content were assessed on streptozotocin-induced type 2 diabetic rats. EEMI exhibited a dose-dependent increase in insulin secretion from clonal pancreatic BRIN BD11 β-cells and isolated mouse islets. EEMI inhibited starch digestion, glucose diffusion over time and DPPH activity in vitro. In acute in vivo studies, EEMI improved food intake, oral glucose tolerance. Moreover, following 28 days of treatment with EEMI, a remarkable amelioration in body weight, fasting blood glucose, plasma insulin, liver glycogen content, total cholesterol, triglyceride, LDL, VLDL and HDL levels were observed. Further phytochemical analysis with EEMI identified the presence of alkaloids, tannins, saponins, steroids, glycosides, flavonoids, and reducing sugar. The synergistic effects of EEMI, potentially attributable to naturally occurring phytoconstituents, hold promise for the development of enriched antidiabetic therapies, offering a promising avenue for the management of type 2 diabetes.

Over the years, researchers have been developing different ventilation strategies as a potential solution for controlling infectious airborne transmissions in healthcare facilities. The effects of ventilation systems on airflow characteristics have been extensively discussed among researchers since SARS-CoV-2 outbreak in 2019. Based on a bibliometric study of 154 publications from 1970 to 2021 retrieved from the Web of Science (WoS) database, this paper examines the research landscape on the effects of ventilation strategies on airflow analysis in healthcare facilities. Results show that China is the most productive country due to its significant contributions to the top prolific authors and funding agencies, which have promoted the research development of the topic. Several research hotspots were identified through keyword co-occurrence analysis. Cluster 1 highlights the ventilation studies involving ventilation layouts and ventilation rates in healthcare facilities. Cluster 2 underlines the computational analysis of ventilation performance for reducing the exposure risk of occupants, which promotes the development of infection control measures. Cluster 3 strengthens the knowledge of the emission and dispersion characteristics of respiratory droplets in healthcare facilities. Overall, this paper highlights the future direction of the current research field other than identifying strategic collaborators and suitable publication outlets for interested researchers.

Robotic path planning and navigation algorithms enable autonomous mobile robots to navigate complex environments. These algorithms allow robots to be deployed in search and rescue missions, where they can locate victims in hazardous areas inaccessible to humans. Additionally, autonomous driving algorithms hold the potential to revolutionize transportation by enabling self-driving cars to navigate roads safely and efficiently. This paper focuses on developing an algorithm for autonomous navigation of the mobile robot (Tortoise bot) using robot operating system (ROS), based on publish-subscribe communication facilitating seamless interaction between various nodes. Tortoise Bot is a differential wheeled robot whose movement is based on two separately driven wheels placed on either side of the robot body. The Raspberry Pi acts as the controller. A 360-degree LiDAR and RGB-D camera are used for creating a 3D map of the environment. Various state-of-the art software tools, such as Gazebo, Ubuntu, MATLAB and RPI imager are used. Initially, a simulation based on simple obstacle avoidance is done using gazebo and MATLAB. Another simulation based on trajectory tracking is implemented using MATLAB to study the kinematic model. Online navigation and path planning are executed with the help of teleoperation and Dynamic Window Approach algorithm. A novel Wander algorithm is created that avoids obstacles on its path. Object recognition is also implemented during autonomous navigation using YOLO.

Cadmium Sulfide nanoparticle (CdS-LA hybrid nanoparticles) was synthesized here by a green approach using the precursor cadmium acetate and sodium sulphide along with the extract of a plant Lathyrus aphaca L. containing the phytochemicals which were responsible for surface modification of nanoparticles. The nanoparticle was used to evaluate their inhibition potential against species of bacteria and fungi. The nanoparticles were characterized by XRD which demonstrates the hexagonal crystal structure. SEM confirms the homogenous surface appearance of the CdS-LA hybrid crystalline structure. EDX analysis confirms surface modification of nanoparticles by phytochemicals. FTIR confirmed the Cd-S linkage laterally with the related functional groups and the presence of metabolites on the surface of nanoparticles. The UV-visible spectroscopy confirmed the peak at the characteristic wavelength range but a slight shift occurred in the peak of the CdS nanoparticles due to the presence of the phytochemicals. This study particularly provides an environment-friendly strategy to synthesize the CdS nanoparticles capped by Lathyrus Aphaca L. extract that are biologically active due to the mediation of the plant extract. CdS-LA hybrid nanoparticles have shown inhibition potential against various species of bacteria and fungi and realize the biological importance of the green synthesis of nanoparticles especially mediated with the plant extract.

Nowadays, more than 180 million people believe that the Holy Qur'an was sent by the Almighty Allah through Prophet Muhammad in 610-632 A.D in Mecca and Medina. However, the word Mecca (Q: 48:24) is mentioned only once in the entire Holy Qur'an, which is not related to the birth of the Prophet or any worship. Conventional Islam is mostly based on the hearsay of some Islamic narrators published in the eighth and ninth centuries. To think deeply and conduct research on the verses of the Holy Quran has been mentioned (special urge) directly and indirectly by this Holy Scripture itself many times but it would not be wrong to say that there is no scholarship on the verses of the Quran based on the research method described in the Holy Quran until the present century. Therefore, this paper has been dared to carry out by combining the methods of research followed in the Holy Quran and the academically accepted research methodology. The analysis shows that the results of almost fourteen hundred years of mythological history of conventional Islamic narrators are opposites. First of all, the proper name of the Prophet revealed by the Holy Quran is Ahmed, but Muhammad is an adjective and there are many such names. Secondly, this prophet was not born in Mecca, KSA, nor in 570/571 A.D, but in the Beqaa Valley of Lebanon, between the third and fourth centuries. Thirdly, the Muslim Hajj (pilgrimage) of Mecca is celebrated entirely according to the Lahwal Hadith (idle tales) (Q: 31:6) in the language of the Holy Quran. Originally the place designated for pilgrimage was in the Beqaa Valley, Lebanon. This article will have a double influence on the Muslim world, that is, Islamic scholars will think again deeply and research new ways of scholarship of the Holy Quran, instead of based on the hearsay of idle tales (Lahwal Hadith). On the contrary, those who are stubborn Islamic narrators, since they have already rejected the Holy Quran, will not hesitate to violently attack the researchers and they will not be positively motivated by this paper. This article specifically urges Islamic scholars to conduct in-depth studies on the most important issues of Islam using the Holy Quranic research method.

The mutation databases have vital importance in detecting genetic mutation and their corresponding phenotypes. The emergence of next generation sequencing genetic technologies has accelerated this process, and the growth of genetic disease identification has created a need for quality control and documentation of mutation-related information. Ethnic-specific mutation databases offer valuable information for researchers, and the article evaluates the homogeneity and effectiveness of these databases. The aim to raise awareness of NEMDBs to healthcare professionals, the general public, and researchers studying genetic disorders. The article also recommendations to improve the effectiveness of these databases.

Differences in metabolic regulation among obesity phenotypes, specifically metabolically healthy obese (MHO) and metabolically unhealthy obese (MUO) women, may lead to varied responses to interventions, which could be elucidated through metabolomics. Therefore, this study aims to investigate the differences in metabolite profiles between MHO and MUO women and the changes following a lifestyle intervention. Serum from 36 MHO and 34 MUO women, who participated in a lifestyle intervention for weight loss were analyzed using an untargeted proton nuclear magnetic resonance spectroscopy (1H NMR) at baseline and 6 months post-intervention. Anthropometric, clinical and dietary intake parameters were assessed at both time points. Both groups showed differential metabolites profile at baseline and sixth month. Seven metabolites including trimethylamine-N-oxide (TMAO), arginine, ribose, aspartate, carnitine, choline and tyrosine significantly changed between group post-intervention, in which all showed a decreasing pattern in MHO. Significant reduction in body weight and BMI in the MUO correlated with changes in carnitine and tyrosine levels. In conclusion, metabolite profiles differed significantly between MHO and MUO women before and after a lifestyle intervention. Changes in carnitine and tyrosine levels in MUO correlated with weight loss, suggesting potential targets for therapeutic intervention.

The COVID-19 infections in Pakistan are spreading at an exponential rate and a point may soon be reached where rigorous prevention measures would need to be adopted. Mathematical models can help define the scale of an epidemic and the rate at which an infection can spread in a community. I used ARIMA Model, Diffusion Model, SIRD Model and Prophet Model to forecast the magnitude of the COVID-19 pandemic in Pakistan and compared the numbers with the reported cases on the national database. Results depicts that Pakistan could hit peak number of infectious cases between June 2020 and July, 2020.

Aim: Shockwaves have been felt all over the world as a result of war, inflation, food shortages, and the COVID-19 pandemic's long tail. The aim of the study is to correlate present global conflicts, pandemic and socio-economic crises with present healthcare sustainability, identifying possible threats and visualize future global health crises if all these catastrophes persist for long. Materials and Methods: PubMed, ALTAVISTA, Embase, Scopus, Web of Science, and the Cochrane Central Registers were prioritized to collect public health issues. Results: The global economic slowdown, sharp decline in financial asset values, decline in imports and exports, contraction of industrial production, rise in inflation, decrease in wages, rise in unemployment, damage to the social security caused by numerous natural calamities, human displacement due to pandemic and ongoing conflicts tear down not only the economic sector but also the health sector. It is already late for taking corrective measure by the participation every country, community or intelligence. Only healthcare issues, highlighted in this study, if focused in the highest platforms, could compel global leaders to forego conflicts and work together. Conclusion: The global health sector will be collapsed soon, if proper initiatives are not taken right now, which has already been grossly mistreated by the pandemic.

This study aims to focus on using the Volterra series and machine learning for forecasting random and chaotic wind speed regimes, since the calm weather is mostly noticed at the local site, making the dataset selection difficult. A novel method is proposed to predict Volterra kernels up to the third order, using a forward-back propagation neural network with 12-month measurements at Fujairah site (UAE). Both daily and monthly wind speed data sets are investigated for forecasting. The three dominant hourly and daily kernels are extracted for each day and each month. Predicted future Volterra kernels are estimated from past values using both statistical analysis and individual neuro networks for each of the Volterra kernel coefficients. Due to the random nature of wind speed at the local site, a two-layer with 4 neurons per layer neuro network is used to locate the most variable and intense speed during 8-hours in the day. Forecasted wind speed is determined with errors arising from different sources such as the utilization of only 3rd-order Volterra kernels and the difficulty of machine training of the employed shallow network. Nevertheless, this work depicts a useful algorithm to forecast chaotic and random wind speed regimes. Computational time is a trade of the complexity of Volterra mathematical analysis.

The study is an attempt to enquire into the preference of undergraduate students, after a considerable and over a year-long experience with Online Teaching and Learning (OTL), under the emergency preventive measure of switching from the traditional face-to-face classes to online. The study followed an exploratory approach, with a quantitative survey followed by a qualitative one, and a convenient sampling method to collect responses from a substantial sample size. The study is positioned after more than a year of remote classes by the undergraduate student, and hence represents highly experienced reflections and preferences from these students, as compared to other studies conducted last year. The study has profound implications in considering, and questioning, the importance of on-campus classes, and significance of the physical presence of a tutor in the class, and its effect on the learning experience of undergraduate students.

Eurycomanone and eurycomalactone are known quassinoids present in the roots and stems of Eurycoma longifolia. These compounds had been reported to have cytotoxic effects, however, their mechanism of action in a few cancer cell lines have yet to be elucidated. This study was aimed to investigate the anti-cancer effects and mechanisms of action of eurycomanone and eurycomalactone in cervical (HeLa), colorectal (HT29) and ovarian (A2780) cancer cell lines via Sulforhodamine B assay. Their mechanism of cell death was evaluated based on Hoechst 33342 assay and in silico molecular docking toward DHFR and TNF-α as putative protein targets. Eurycomanone and eurycomalactone exhibited in vitro anti-cancer effects manifesting IC50 values of 4.58 ± 0.090 µM and 1.60 ± 0.12 µM (HeLa), 1.22 ± 0.11 µM and 2.21 ± 0.049 µM (HT-29), and 1.37 ± 0.13 µM and 2.46 ± 0.081 µM (A2780) respectively. They induced apoptotic cancer cell death in dose- and time-dependent manners. Both eurycomanone and eurycomalactone were also predicted to have good inhibitory potential as demonstrated by the docking into TNF-α with binding affinity of -8.83 and -7.51 kcal/mol, respectively, as well as into DHFR with binding affinity results of -8.05 and -8.87 kcal/mol, respectively. These results support the evidence of eurycomanone and eurycomalactone as anti-cancer agents via apoptotic cell death mechanism that could be associated with TNF-α and DHFR inhibition as among possible protein targets.

Lithium-ion batteries have gained immense popularity in electric vehicles(EVs) due to their high energy density, offering an extended driving range. This has made them the preferred choice in the automotive industry, driving the shift towards EVs. However, alongside their popularity, safety concerns have arisen. The main issues include the potential for thermal runaway leading to fires or explosions, which can occur due to overcharging, physical damage, or manufacturing defects. While safety features and rigorous testing aim to mitigate these risks, ongoing research and development focus on enhancing safety measures to further ensure the reliability and safety of lithium-ion batteries in EVs. This paper focuses on the development and deployment of a real-time monitoring dashboard for Li-ion battery health monitoring using STM32 Microcontroller within the framework of Industry 4.0. Leveraging advanced sensor technology and data analytics, the dashboard provides continuous, comprehensive insights into battery performance, including state of charge and temperature. Integrating with Industry 4.0 principles, such as IoT, the system enables predictive maintenance, optimizing production processes and ensuring efficient utilization of resources. The implementation showcases the integration of real-time monitoring tools for Li-ion batteries, aligning with the transformative paradigms of Industry 4.0 to enhance operational efficiency and reliability within industrial settings.

COVID-19 has affected 212 countries around the world, killing nearly 300,000 and infecting more than 4.4 million by May 14, 2020. Bangladesh, a South Asian low-middle-income economy, has experienced a demographic and epidemiological transition with rapid urbanization and a gradual increase in life expectancy. It is the seventh most populous country in the world and population of the country is expected to be nearly double by 2050. The increasing burden of communicable diseases in Bangladesh can be attributable to rapid urbanization and nearly 50% of all slum dwellers of the country live in Dhaka division. In 2017, National Rapid Response Team of IEDCR investigated 26 incidents of disease outbreak. The joint survey of the Power and Participation Research Centre and BRAC Institute of Governance and Development reveals that per capita daily income of urban slum and rural poor drops by 80% due to present countrywide shutdown enforced by the government to halt the spread of Covid-19. 40%-50% of these population took loans to meet the daily expenses. However, the country has just 127,000 hospital beds, 91,000 of them in government-run hospitals. Researchers say, the country’s economy is economy is losing BDT 33 billion every day from its service and agriculture sectors during the nationwide shutdown.

Fifth Generation (5G) communication technology is intended to offer higher data rates, outstanding user exposure, power consumption, and extremely short latency. Such cellular networks will implement a diverse multi-layer model comprising of device-to-device networks, macro-cells, and dissimilar categories of small-cells to assist customers with desired quality-of-service (QoS). This multi-layer model affects several studies that confront utilizing interference management and resource allocation in 5G networks. With the growing need and the lack of resources, the resource distribution problem desires to be focused capably to accomplish the traffic and to enhance network working. One of the utmost serious problems is to alleviate the jamming from the network in support of having a better QoS. However, there are limited review papers written on resource distribution, there is no particularize and organized review carry out in 5G resource allocation. Hence, this article covers and evaluates the argument using a classification of existing developing resource allocation schemes in 5G thoroughly by classifying the schemes to enhance the service quality. This survey comprises the discussion based on metrics used to evaluate the performance. It would also permit ahead beyond evidence on resource allocation methods in 5G and empowers the scholars to meet the present research areas to focus on.

This study was designed to assess variation of possible phytochemical compounds in the ethanolic extracts of Gigantochloa scortechinii rhizome. Destructive sampling was done by using selective random sampling method on four consecutive rhizomes from healthy clumps and was conducted at two natural forests and one secondary forest (planted). Homogenized sample were extracted using solvent extraction (70% ethanol) method. Ethanolic extracts of G. scortechinii rhizome were qualitatively analyzed using GC/MS GC2010 Plus, Shimadzu to determine the composition of phytochemical compounds and identified using FFNSC 1.3, NIST11, PMW_tox2, and Wiley229 spectral library. A qualitative variation was observed with a total of 56 compounds were identified and differentiated between study site and rhizome age. Results revealed that G. scortechinii rhizome contains various phytochemical compounds with potential as a plant of phytopharmaceutical importance. This is the first finding on the spatial and age-related effects of phytochemical compounds in a consecutive rhizome and of G. scortechinii rhizome specifically.

Understanding morphological and genetic diversity of forest trees is essential to facilitate their conservation, sustainable management and genetic improvement for addressing the economic and environmental demands and challenges. We have examined variation in morphometric seed and pod traits and seed germination of multipurpose and widely distributed forest tree Albizia lebbek (Indian siris) from 12 provenances covering the species’ range in northern India and its relationships with bioclimatic factors. Highly significant inter-provenance variation was observed in seed size (seed length (SL), seed width (SW), SW/SL, SL×SW), seed mass (1000 seed weight), pod size (pod length (PL), pod width (PW), PW/PL), seed germination, number of seeds per pod, and insect infected seeds (IIS). The provenance effect contributed a major portion to the total phenotypic variance. Morphometric variation in all traits except for IIS was not clinal related to longitude, latitude, altitude or rainfall. There was an indication of the presence of ecotypic variation. IIS showed clinal variation with significant negative correlation with latitude. Most seed size and pod size traits showed positive correlations with several temperature bioclimatic factors and negative correlations with several precipitation bioclimatic factors. Our results have significance for genetic improvement, population genetics and genomics studies and conservation and sustainable management of A. lebbek genetic resources.

Speech emotion recognition (SER) is a technology that can be applied in distance education to analyze speech patterns and evaluate speakers’ emotional states in real-time. It provides valuable insights and can be used to enhance the learning experience by enabling the assessment of instructors’ emotional stability, a factor that significantly impacts information delivery effectiveness. Students demonstrate different engagement levels during learning activities, and assessing this engagement is an important aspect of controlling the learning process and improving e-learning systems. An important aspect that may influence student engagement is the emotional states of their instructors. Accordingly, this research uses deep learning techniques to create an automated system for recognizing instructors’ emotions in their speech when delivering distance learning. This methodology entails integrating Transformer, convolutional neural network, and long short-term memory architectures into an ensemble to enhance SER. Feature extraction from audio data used Mel-frequency cepstral coefficients, chroma, Mel spectrogram, zero crossing rate, spectral contrast, centroid, bandwidth, roll-off, and root-mean square, with subsequent optimization processes adding noise to, conducting time stretching, and shifting the audio data. Notably, several Transformer blocks were incorporated, and a multi-head self-attention mechanism was employed to identify the relationships between the input sequence segments. The pre-processing and data augmentation methodologies significantly enhanced the precision of the results in that the model achieved accuracy rates of 96.3%, 99.86%, 96.5%, and 85.3% on the Ryerson Audio-Visual Database of Emotional Speech and Song, Berlin Database of Emotional Speech, Surrey Audio-Visual Expressed Emotion, and Interactive Emotional Dyadic Motion Capture datasets. Furthermore, it achieved 83% accuracy on another dataset created for this research—the Saudi Higher Education Instructor Emotions dataset. The results demonstrate this model’s considerable accuracy in detecting emotions in speech data across different languages and datasets.

This panel study investigates the relationship between green logistics indices, economic, environmental, and social factors in the perspective of Asian emerging economies. This study adopted FMOLS and DOLS methods to test research hypothesis, catering the problem of endogenity and serial correlation. The results suggest that logistics operations, particularly LPI2 (efficiency of customs clearance processes), LPI4 (quality of logistics services) and LPI5 (trade and transport-related infrastructure), are positively and significantly correlated with per capita income, manufacturing value added and trade openness. While, greater logistics operations are negatively associated with social and environmental problems including, climate change, global warming, carbon emissions, and poisoning atmosphere. In addition, human health is badly affected by heavy smog, acid rainfall, and water pollution. The findings further extend and reveal that political instability, natural disaster and terrorism are also a primary cause of poor economic growth and environmental sustainability with poor trade and logistics infrastructure. Further, the application of renewable energy resources and green practices can mitigate negative effects on social and environmental sustainability without compromising the performance of economic growth. There is very limited empirical work presented in literature using renewable energy and green ideology to solve macro-level social and environmental problems, while this study will assist the policymakers and researchers to understand the importance of green concept in improving countries’ social, economic and environmental performance.

We do this research to investigate the relationship between renewable energy, public health expenditure, logistics performance indices, and economic and environmental sustainability in the ASEAN member states, through the analysis of a panel data from 2007 to 2017. The study used secondary data, which is downloaded from the World Bank Website and employs SEM (Structural Equation Modelling) model for testing hypothesis. The results show that the usage of renewable energy in logistical operations would enhance the environmental and economic performance in terms of mitigating carbon emissions and greenhouse gas emissions. While, public health expenditure and environmental performance is negatively correlated, which confirms that greater environmental sustainability with lower carbon emissions and greenhouse gases will improve human health and economic growth. Moreover, greater public health expenditure and poor environmental performance has negative effect on economic growth, inefficiency and low productivity of labor slowdown to the economic activities. For another side, the usage of renewable energy and the adoption of green practices in international logistics will develop the environmental sustainability, establish better image of a country and attract foreign direct investment inflows, and also minimize carbon emissions and public health expenditure, spurring sustainable economic growth with better export opportunities in pro-environmental countries.

The tumor necrosis factor receptor associated factor 1 (TRAF1) plays a key role in promoting lymphocyte survival, proliferation, and cytokine production. Recent evidence showed that TRAF1 plays opposing roles in monocytes and macrophages where it controls NF-B activation and limits pro-inflammatory cytokine production as well as inflammasome-dependent IL-1 secretion. Importantly, TRAF1 polymorphisms have been strongly linked to an increased risk of rheumatoid arthritis (RA). However, whether and how TRAF1 contributes to RA pathogenesis is not fully understood. Moreover, investigating the role of TRAF1 in driving RA pathogenesis is complicated by its multifaceted and opposing roles in various immune cells. In this study, we show that intraarticular injection of TRAF1 deficient macrophages into knee joints of wildtype (WT) mice subjected to the collagen antibody induced arthritis (CAIA) model of RA significantly exacerbated joint inflammation, immune cell infiltration and tissue damage compared to mice injected with WT macrophages. This study may lay the groundwork for novel therapies for RA that target TRAF1 in macrophages.

The reaction of 2-bromo-1-(5-methyl-1-(4-nitrophenyl)-1H-1,2,3-triazol-4-yl)ethan-1-one (1) with 4-amino-5-((2,4-dichlorophenoxy)methyl)-4H-1,2,4-triazole-3-thiol (2) in absolute ethanol in the presence of triethyl amine as catalyst gave 2-((4-amino-5-((2,4-dichlorophenoxy)methyl)-4H-1,2,4-triazol-3-yl)thio)-1-(5-methyl-1-(4-nitrophenyl)-1H-1,2,3-triazol-4-yl)ethan-1-one (3) in 73% yield. The structure of the title heterocycle (3) was confirmed by X-ray single crystal diffraction and spectral analyses (NMR and IR).

Australia is a unique continent surrounded by the ocean and the majority of catchments flow to the coast. Some of these catchments are gauged and others are ungauged. There are 405 gauged catchments covering 2,549,000 km2 across the coastal regions of 12 drainage divisions in Australia. Whereas there are 771 catchments conceptualised as ungauged covering additional 835,000 km2. The mean annual rainfall and PET and its spatial and temporal distribution vary significantly from one drainage division to another. We developed a continuous daily streamflow time series of all gauged and ungauged catchments from 1993 onwards. We applied the GR4J lumped conceptual model to these catchments. The performance of gauged catchments was analysed through (i) visual inspection of daily hydrographs, flow duration curves and daily scatter plots, and (ii) performance metrics including NSE and PBias. Based on the NSE and PBias, performance ratings of 80% and 96% of the models respectively were found 'good'. There was no relationship found between the catchment area and model performance. The ungauged catchments were divided into four categories based on distance from potential donor catchments where observed data are available for GR4J model calibration, and Köppen climate zone. The total ungauged catchments represent 24.7% of the total drainage division areas. The streamflow from ungauged catchments was estimated using GR4J model based on the parameters of their donor catchments. Overall, runoff ratios from ungauged catchments were found to be higher compared to their donor gauged catchments, likely driven by their higher rainfall and less PET. This tendency was particularly evident in two drainage divisions – the Carpentaria Coast (CC) and Tanami-Timor Sea Coast (TTS) where ungauged areas comprised 51% and 43% respectively. The mean gauged annual streamflow varied significantly across drainage divisions – 230 GL from South Australian Gulf (SAG) to 146,150 GL in TTS. The streamflow from all ungauged catchments was estimated at 232,200 GL per year. Overall, the average streamflow from all drainage divisions, including gauged and ungauged areas, across the coastal regions of Australia was estimated at 419,950 GL per year. This nationwide estimate of streamflow dataset could potentially enhance our understanding of coastal processes and improvements of marine modelling systems and tools.

Promoting organic foods production and consumption contributes to accomplishing United Nations sustainable development goals. Social commerce provides a promising opportunity to develop the organic food industry. However, there is limited knowledge regarding customer behaviors in relation to purchasing organic foods via social commerce platforms. Therefore, this study expanded upon the unified theory of acceptance and use of technology (UTAUT-2) to develop a comprehensive model that explains how customers' social commerce trust and behavioral intentions to purchase organic foods using Instagram social commerce affect their purchasing behaviors. The research model was analyzed by employing partial least squares structural equation modeling (PLS-SEM) for the data collected from a quantitative survey of 410 customers who used Instagram to purchase organic foods in Iran. The results revealed that facilitated purchasing conditions, hedonic motivations, social influence, rating and reviews, and influencers’ endorsements increase customers' purchase intentions. Moreover, Instagram’s recommendations and referrals, influencers’ endorsements, as well as social influence boost customers' trust in the social commerce platform. Eventually, it was determined that influencers’ endorsements, social commerce trust, and purchase intention determine a customer’s organic foods purchasing behaviors. This research provides valuable insights for organic food marketers to optimize their social commerce strategies.

The laser differential equations are used to transform them into identical coupled maps. Valuable results are deduced during analytical and numerical studies on cavity loss. Phase and spatiotemporal synchronized attractors are observed via quasi-chaos under a certain range of controlling parameters, and symmetry breaking of chaotic attractors due to collision with their basin boundaries, and transpire differently from the previous attractors. During the numerical simulation, it is found that the sequence of repeated strange attractors if the coupling strength further increases, which are orthogonal mirror images (the dynamics of the system is the same at different values of controlling parameters). Moreover, it can help us to predict future problems and their solutions based on current issues, if we develop this model in more general.

Three-dimensional reconstruction plays an important role in assisting doctors and surgeons in diagnosing bone defects’ healing progress. Common three-dimensional reconstruction methods include surface and volume rendering. As the focus is on the shape of the bone, volume rendering is omitted. Many improvements have been made on surface rendering methods like Marching Cubes and Marching Tetrahedra, but not many on working towards real-time or near real-time surface rendering for large medical images, and studying the effects of different parameter settings for the improvements. Hence, in this study, an attempt towards near real-time surface rendering for large medical images is made. Different parameter values are experimented on to study their effect on reconstruction accuracy, reconstruction and rendering time, and the number of vertices and faces. The proposed improvement involving three-dimensional data smoothing with convolution kernel Gaussian size 0.5 and mesh simplification reduction factor of 0.1, is the best parameter value combination for achieving a good balance between high reconstruction accuracy, low total execution time, and a low number of vertices and faces. It has successfully increased the reconstruction accuracy by 0.0235%, decreased the total execution time by 69.81%, and decreased the number of vertices and faces by 86.57% and 86.61% respectively.

The major aim of this study was to investigate and explores the linkage between economic growth, electricity access, energy use and population growth in Pakistan. To check the variables stationarity, Augmented Dickey-Fuller (ADF) and Phillips-Perron unit root test was applied and an Autoregressive Distributed Lag (ARDL) bounds testing approach to co-integration was applied to investigate the dynamic causality link among the study variables. These tests shed light on the long-run connection among the variables; further, the results revealed that electricity access to population, electricity access to urban population, energy usage, population growth, and urban population growth had a significant impact on economic growth, while the electricity access to rural population and rural population growth has a negative impact on the economic growth in Pakistan. According to these findings, study commends that government of Pakistan pay further attention to increase its electricity production from different sources including, hydroelectric, solar, oil and gas and nuclear in order to fulfill the country’s demands. By using ARDL bounds testing approach, this study filled the literature gap regarding economic growth, electricity access, energy use and population growth in Pakistan.

Amyotrophic Lateral Sclerosis (ALS) is a prototypical neurodegenerative disease characterized by progressive degeneration of motor neurons to severely effect the functionality to control voluntary muscle movement. Most of the non additive genetic aberrations responsible for ALS make its molecular classification very challenging along with limited sample size, curse of dimensionality, class imbalance and noise in the data. Deep learning methods have been successful in many other related areas but have low minority class accuracy and suffer from the lack of explainailbilty when used directly with RNA expression features for ALS molecular classification. In this paper we propose a deep learning based molecular ALS classification and interpretation framework. Our framework is based on training a convolution neural network (CNN) on images obtained from converting RNA expression values into pixels based on DeepInsight similarity technique. Then we employed Shapley Additive Explanations (SHAP) to extract pixels with higher relevance to ALS classifications. These pixels were mapped back to the genes which made them up. This enabled us to classify ALS samples with high accuracy for a minority class along with identifying genes that might be playing an important role in ALS molecular classifications. Taken together with RNA expression images classified with CNN, our preliminary analysis of the genes identified by SHAP interpretation demonstrate the value of utilising Machine Learning to perform molecular classification of ALS and uncover disease-associated genes.

Coronavirus disease is a newly identified infectious disease that began in Wuhan, China in 2019 and is recognized as COVID-19. This virus has a serious impact on the planet that causes the deaths of millions of people; it produces unemployment and poverty. However, it has constructive environmental effects that reduce the amount of pollution in the atmosphere. Pakistan is also a developing economy caused by this deadly virus. Before 03 April 2021, the percentage of reported cases ranges from 682,888, with about 14,697 casualties and a total of 609,691 cases retrieved. Pakistan’s war against coronavirus can differ from advanced technical countries due to lack of resources. In this article, we will address the relation between COVID-19 and the environment in the particular case of Pakistan. There is evidence that this pandemic has lowered concentrations of greenhouse gases, including CO2 and NO2, as a consequence of global lock-down strategies.

Study aimed to evaluate the impact of integrating family planning with maternal, newborn, and child health (FP-MNCH) on uptake of modern contraceptive methods and related health outcomes in two districts of the province of Sindh, Pakistan. Impact of intervention was evaluated using a quasi-experimental control before-after study design. Intervention included capacity building of healthcare providers and outreach workers, ensuring sustained supplies of family planning commodities, data-driven decision-making, and community engagement activities. Data was collected through household surveys at baseline (December2020) and endline (December 2022). The sample size was estimated as 880 married women of reproductive age (MWRA) in each district. The Difference and Difference(DiD) analytical method was used to estimate the impact of intervention adjusted for potential confounding factors. There was statistically significant increase of 11.3% in the current use of MCM in the intervention group compared to the control group (p value <0.001), with increases observed in the uptake of injection , implants, and condoms. Additionally, there was an increase in the proportion of women who had ANC visits (DiD 10.5% p value 0.003), FP counselling during ANC (DiD 15.6% p value < 0.001), LHW visits during pregnancy (DiD 15.1% p value 0.021), PNC check-ups for mother (DiD 25.2% p value <0.001), LHW visits after delivery (DiD 20.4% p value <0.001), and LHW advised for family planning at PNC visit n (DiD 14.5% p value 0.030). This study provides strong evidence for the scaling-up of integrated interventions through existing health care platforms utilizing human resources deployed by the government. This FP-MNCH model has the potential to be adopted in other provinces and at federally administered areas for both health and population planning. This model should be considered for replication in other districts of Sindh to accelerate current level of integration already existing.

L-gulonolactone oxidase enzyme (GULO) catalyzes the last step of L-ascorbic acid (vitamin C) biosynthesis. This enzymatic activity is lost in primates. The full-length rat GULO has been previously produced in plants and demonstrated to be active. In this study, we compare activity of two variants of GULO produced in Escheriachia coli cells, full-length rat GULO (fGULO) and its C-terminal catalytic domain (cGULO). The expression and purification of the recombinant proteins were optimised and their biological activity was confirmed by two methods, the GULO activity assay in the protein extracts and the ‘in-gel’ staining for GULO activity. Both variants of recombinant GULO were biologically active in both assays. However, cGULO is more promising than fGULO for ascorbic acid production because it is more efficiently produced by bacteria.

Organizational climate is the ascribed psychological meanings and significance associated with the procedures, policies and practices that are recognized and rewarded in the workplace, and hence mediates the effects of environmental stimuli on individuals’ response. Safety climate is a specific organizational climate, i.e., organizational climate for safety. Previous research claimed that organizational climate provides foundation for safety climate, but without elaboration on the foundational mechanisms. This paper attempts to fill up this knowledge gap. As organizational climate is a multi-dimensional phenomenon, this paper chooses two dimensions, i.e., perceived organizational support (POS) and participative decision-making (PaDM), for illustrative purposes. Drawing on an interactive approach to forming climate perceptions, this paper introduces two interactive constructs, i.e., leader-member exchange (LMX) and team member exchange (TMX), and establishes a multiple mediation model depicting the foundational effect of organizational climate on safety climate. A random sample of Hong Kong based construction personnel is used to validate the model. The results show that both POS and PaDM are positively associated with perceived safety climate, both LMX and TMX fully mediate the effect of PaDM on safety climate, and only LMX partially mediates the effect of POS on safety climate. This study sheds light on the foundational effects of organizational climate on safety climate. POS can improve the quality of reciprocal exchange about safety matters between construction personnel and their supervisors, and hence raise construction personnel’s awareness of the priority of safety. PaDM can improve the quality of reciprocal exchange about safety matters vertically and horizontally, and hence have construction personnel aware the importance of safety. In practice, this paper suggests that project managers timely recognize and reward construction personnel’s contribution, genuinely cares about their well-being, and take their suggestions seriously in making decisions. In this way, the quality of both vertical and horizontal exchange about safety matters improves, and a sound and positive safety climate ensues.

When discussing the Diophantine quintic equation $p(a^5 + b^5) = q(c^5 + d^5)$ where p is a prime and q is an integer, there is a clear gap between the mathematical literature and online forums. Because of the intrinsic complexity of parameterizing fifth-degree equations, this equation re- mains largely unexplored. In this work, we approach this quintic problem through algebraic methods with the goal of providing numerical solutions that illuminate its properties and behaviors.Our research uncovers in- triguing patterns and connections that shed light on the enigmatic nature of Diophantine quintic equations in this particular form.

Globally, large numbers of adults remain unbanked and most of them live in rural areas of the Third World. The recent outbreak of the COVID-19 pandemic has shown us how inequalities in accessing financial services continue to affect us. However, financial inclusion has emerged as an effective tool to tackle socioeconomic ills and drive economic development. In fact, due to these modern technological developments, the number of studies in this area is very limited, especially in the context of developing economies. This study examines the impacts of migrant remittances on digital financial inclusion within households using the Migration and Remittance Household Survey in Bangladesh. To meet the research objectives of this study, a household survey was conducted and interviewed 2,165 households in 2022-2023 in Bangladesh. This study finds that the coefficient of remittance has a positive relationship with the probability of using mobile banking for a household's financial transactions. However, the use of ATM cards by households for financial transactions has not been significantly affected. The article concludes that remittance flows may enhance access to and use of digital financial inclusion by reducing some of the barriers and costs in Bangladesh, which can greatly contribute to the country's economic growth by creating and increasing a strong fund for investment.

People must have particular personality traits and social resources, also known as health literacy, in order to access, comprehend, and use information to make decisions about their health. Patients' ability to engage in complex disease management and self-care is strongly related to their level of health literacy. It can help us stay healthy by preventing illness and effectively managing existing illnesses. People with low health literacy (LHL) may find it difficult to manage their condition and prevent illness, which may lead to increased use of healthcare services. Furthermore, LHL is associated with increased hospitalizations, increased use of emergency care, decreased use of preventative services, and a worsened ability to understand labels and health messages, a worsened state of health, higher mortality, and more expensive medical care.

COVID-19 has affected 210 countries around the world, killed more than 240,000 and infected more than 3.4 million. Bangladesh, a South Asian low-middle-income economy, has experienced a demographic and epidemiological transition with rapid urbanization and a gradual increase in life expectancy. It is the seventh most populous country in the world and population of the country is expected to be nearly double by 2050. The increasing burden of noncommunicable diseases in Bangladesh can be attributable to rapid urbanization and nearly 50% of all slum dwellers of the country live in Dhaka division. In 2017, National Rapid Response Team of IEDCR investigated 26 incidents of disease outbreak. The joint survey of the Power and Participation Research Centre and BRAC Institute of Governance and Development reveals that per capita daily income of urban slum and rural poor drops by 80% due to present countrywide shutdown enforced by the government to halt the spread of Covid-19. 40%-50% of these population took loans to meet the daily expenses.

This paper investigates and explores the minor crops production in Pakistan and its association with the agricultural gross domestic product. The agriculture sector of Pakistan has a rich contribution to the economic growth and development. Like major crops; minor crops also have a vital role to boost up the agriculture sector. Time span data was used in this study and it was collected from the Economy Survey of Pakistan annual reports. Augmented Dickey-Fuller (ADF) unit root test and Ordinary Least Square (OLS) method was used to analyze the data and results were interpreted by employing the Johansen co-integration test. Study results reveal that bajra, barely and jowar has a significant impact on the agricultural gross domestic product, while the total cropped area has a negative impact on AGDP. On the basis of the study results, we recommend the policy implications.

An efficient design of conservation tillage trencher (CTT) saves time, natural resources, and conserves soil health by avoiding vigorous soil disturbance of tillage operations. A two-wheel tractor operated CTT has constructed with modified rotary shafts, toolbar frames, depth control bars, bed shapers and chisel ploughs for conservation tillage operation of sugarcane plantation. The performance evaluation of developed CTT was tested for comparing the suitability with small-scale farmer’s practice (SFP) and large farm practice (LFP). Finally, the CTT is applied for preparing sugarcane farmland in different conservation tillage methods of i) bed cum trenching (BT), ii) zero-tillage trenching (ZT) and iii) strip-tillage (ST). The performance of effective field capacities of CTT were 0.14 ha h-1, 0.12 ha h-1 and 0.14 ha h-1 for BT, ZT and ST, respectively. Developed CTT saved time 80% and 26-37% over SFP and LFP, and required 96% and 26-36% less labour than SFP and LFP, respectively. Conservation tillage required 7-10 l ha-1diesel whereas SFP and LFP required 25 l ha-1and 65 l ha-1, which reduced CO2 emission by 60-72% and 85-89% compared to SFP and LFP, respectively. Ultimately, newly developed CTT saved sugarcane land preparation costs by 86% to 90% compared to conventional tillage systems.

There is clinical concern about the combined use of alcohol and opiates. Several lines of evidence support an interaction between alcohol and the endogenous opioid system. Thus, we hypothesized that ethanol by causing the release of opioid peptides may sensitize the system to the action of exogenous opioids such as morphine. In this study, using the place conditioning paradigm as an animal model of reward, we determined whether a morphine challenge would alter the pre-established preference induced by ethanol conditioning in mice, and whether this response was mediated by the mu opioid receptor (MOP). Given that ethanol exposure stimulates the release of opioid peptides, we also assessed the role of beta-endorphin (β-END) and enkephalins (ENKs) in this response. Mice lacking MOP, β-END and/ or ENKs as well as their respective wild-type controls were tested for baseline place preference on day 1, conditioned with ethanol (2 g/kg) versus saline on days 2 to 4 and then tested under a drug-free state for postconditioning place preference on day 5. On day 8, mice received a single injection of morphine (5 mg/kg) and were tested for place preference. On each test day, mice were placed in the central neutral chamber and allowed to freely explore the conditioning chambers. The amount of time that mice spent in each chamber was recorded. We found that a challenge dose of morphine given on day 8 enhanced the CPP response in mice previously conditioned with ethanol. This response was abolished in MOP null mice, confirming the role of MOP in this response. Although this enhanced response was not altered in mice lacking either β-end or ENKs compared to their wild-type littermates/controls, it was completely blunted in mice lacking both β-end and enkephalins. Together, these results suggest that these opioid peptides jointly mediate the crosstalk between the rewarding actions of morphine and ethanol.

Currently, various issues on environment have been discussed, whether the importance, destruction or ways to prevent the destruction of the environment. This paper will explore the issue from the conventional viewpoint as well as from the Islamic perspective. Destruction of the environment in recent times has worsened due to the uncontrolled exploitation of natural resources by human beings in order to generate profits. In view of the increasing technological development in Malaysia presently, this matter should not have occurred because the citizens intellectual abilities can be considered advanced. In other words, these people should be able to weigh between positive and negative consequences of voraciously exploiting natural resources. However, the greed that engulfs some of these people has obscured their view from grasping the future consequences of their acts. Based on the Islamic perspective in which the Quran is the ultimate reference, destruction of the environment can actually be prevented if every individual is aware of his or her trustworthiness or responsibility as His caliphate in this universe. Nevertheless, is there any specific verse in the Quran which explains about preservation of the environment? Can lessons from the Quran provide solutions to the environmental crises in Malaysia? This study provides explanations to the questions based on literature surveys and content analyses. By interpreting some selected verses that relate to preservation of the environment, findings from the discussions have identified that the Quranic verses are valuable resources for the sustainability of the environment.

Chemical fertilizers are commonly used to meet the nutritional demands of the crops and boost their yield. However, their high costs and excessive application in soils increases the cost of production and have negative effects on the soil and environmental health. Vermicompost is an organic amendment that can potentially lessen the dependence on chemical fertilizers with additional advantages of sustainable nutrient supply to crops and maintaining soil health. To evaluate the potential of two diverse vermicomposts, sole and combined application of these vermicomposts with reduced rates of chemical fertilizers were used for tomato cultivation in a field study. The results indicated that vermicompost produced from cow dung combined with chemical fertilizers proved to be more effective in improving tomatoes' growth, physiology, yield and nutritional attributes. Combined application of vermicompost and chemical fertilizer significantly improved root length (21.6%), plant height (167%), SPAD value (13.5%),chlorophyll 'a' (96%), chlorophyll 'b' (161%), relative water content (16%), membrane stability index (18%), carotenoid (87%), yield (82%), photosynthetic rate (148%), and fruit diameter (83%) protein (89%), fat (27.5%), fiber (12%), vitamin C (52%), calcium (54%), magnesium (117%), phosphorus (38%), potassium (128%), as compared to control treatment (NP applied). In addition, significant improvements in different soil physico-chemical properties were also pragmatic. The results suggest that vermicompost application with reduced doses of chemical fertilizers can be used to improve crop yield and soil physico-chemical properties.

The laser sintering process and modification of electrophoretic deposition (EPD) YSZ coatings on YSZ air plasma sprayed thermal barrier coatings (TBCs) were investigated. Ni-based superalloy was plasma sprayed using yttria-stabilized zirconia (YSZ) to perform thermal barrier coating with 400 μm thickness. The electrophoretic deposition (EPD) technique was used for depositing nanopowder of YSZ on the surface of YSZ TBCs. In this study, a technology of direct sintering the green EPD layer by laser beam was carried out. The best conditions of deposition YSZ overlay coating using DC current were obtained with applied voltage 40 V, deposition time 5 min, and suspension concentration 10 g/l. Iodine was added to the solutions as the stabilizing agent. To overcome the disadvantages of high sintering temperatures, laser sintering was taken as a new approach. Microstructures for all specimens were studied using Field Emission Scanning Electron Microscopy (FESEM) with EDS analysis. Surface roughness was investigated using AFM analysis and central line average (CLA). The results indicated that the morphology after the direct laser sintering of the EPD layer has a fine and controllable grain size, high hardness, and low roughness. Which is better than the direct laser on plasma-sprayed coatings.

Few studies have explored the gender wage gap among farmworkers, and there is a notable absence of research on how farm wages impact household welfare differently based on gender. This study aims to fill this gap by examining how farm wages affect gender disparities in household welfare among farmworkers in Nigeria. Using survey data from 720 farmworkers, we investigated gender-based differences in household welfare. Our approach combined parametric methods (Blinder-Oaxaca decomposition) to assess gender gaps in household welfare and non-parametric techniques (Propensity Score Matching, PSM) to estimate the effects of farm wages. The analysis reveals that female farmworkers experience significantly lower per capita food consumption expenditure (₦11,486.51 less) compared to their male counterparts. These disparities partly stem from differences in socioeconomic factors, job characteristics, and enterprise attributes between male and female farmworkers. The study underscores the role of farm wages in mitigating gender gaps in household welfare, demonstrating that farm wages have increased per capita food consumption expenditure for female farmworkers by ₦6,640.698. This finding highlights the potential of wage increases to enhance livelihoods, underscoring the importance of equitable wage policies in farming. Furthermore, our findings emphasize that the impact of farm wages on welfare varies with household characteristics, suggesting the need for targeted interventions tailored to enhance identified household attributes. Addressing these factors could effectively reduce gender inequalities in farm work and contribute to overall welfare improvements.

Immunosensors have been widely developed to use antibodies to detect a pathogen of interest; it is interesting to look at the effect of nonspecific antibody binding to E. coli using electrochemical methods. IgG antibody not specific to E. coli O157:H7 was crosslinked onto a screen-printed carbon electrode. The presence of E. coli at 4, 4 × 10², 4 × 10⁵, and 4 × 10⁸ CFU/mL on the electrode surface was detected via linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). Current transfer at both electrodes was reduced as the concentration of bacteria increased; however, the calibration of number of cells to decreased current was nonlinear for IgG-modified electrodes. The nonlinearity is confirmed by EIS measurements which showed highest impedance at 4 CFU/mL E. coli when impedance should be the lowest. FESEM images showed higher binding of cells when IgG is present compared to electrodes with reduced graphene oxide (rGO) alone. Electrodes with rGO alone show less attachment of E. coli, with EIS showing a linear calibration profile, while LSV shows not much difference in current values for all concentrations aside from the highest concentration. These results suggest that nonspecific binding can provide false signals in electrochemical measurements, and it is crucial to provide proper controls.

In this article, our main purpose is to establish a new extension of Mittag-Leffler function by using the known extended beta function $\mathbf{B}_{\omega}(a,b;p)$ introduced in [1]. It led to a novel extension of the applicability of Mittag-Leffler function that introduced them as distributions defined for a specific set of functions. We also, investigate some of its important properties, namely recursion relation, Mellin transform and differential formulas.

This study aimed to assess knowledge and practice of caregivers and its relationship to the disease and nutritional status of children under five years of age in rural areas of Sylhet, Bangladesh. A total of 110 households having 6 to 59 months aged children was selected by simple random method from ten rural communities of three Upazila of Sylhet during September 2019 to February 2020. Descriptive statistics were used to assess the WASH knowledge & practice and multivariate chi-square analyses were performed to assess associations among diseases & nutritional status with WASH following a structured questionnaire. The study found a significant association of WASH with childhood disease and nutritional status, and 65% of children were found to be in a diseased state and 35% of children were found to be in a disease-free state within the last six months. The findings sketched that mother with poor wash knowledge and practice was at greater risk for disease outbreaks, disease frequency and duration. The highest incidence of diarrhea was 17% in children aged 12 to 23 months. Significant effect of WASH was also found in children nutrition status, that was reflected in the ratio of stunted, underweight and wasted children. Integrated convergent work focusing on the provision of clean water within the household, stop open defecation, promotion of hand washing, behavior change and poverty alleviation is needed to improve the situation. Health, nutrition and livelihood programs should be uninterrupted, and mothers or caregivers should be encouraged to participate in these programs.

This study provides a thorough examination of the introduction of 5G technology in Bangladesh's agriculture sector, providing insights into the problems and potential implications related to its adoption. Focusing on the contextual landscape of Bangladesh, the study evaluates the effectiveness, efficiency, scalability, and ease of implementation of 5G technology concerning key challenges faced by the agricultural sector. Drawing comparisons with global perspectives, including countries such as China, Taiwan, Colombia, Netherlands, and India, the analysis provides a nuanced understanding of the diverse technological landscapes. The examination encompasses the evolution from 4G to 5G, emphasizing the commitment of major telecommunications providers in Bangladesh to advance technological capabilities. The challenges in rural adoption, limited technology literacy among farmers, and high smartphone costs are discussed, highlighting potential barriers to seamless integration. To address the creation of a more comprehensive technological infrastructure, the study also explores the efforts and regulatory support provided by the government and the Bangladesh Telecommunication Regulatory Commission (BTRC). Furthermore, the comparative analysis sheds light on the unique characteristics and advancements in other countries, contributing to a holistic understanding of 5G's role in transforming global agricultural practices. By exploring the anticipated socio-economic factors influencing the pace and success of 5G adoption in the agricultural sector, this paper emphasizes the need for collaborative efforts, infrastructure development, and addressing accessibility challenges to achieve widespread agricultural technology integration.

Potato is among one of the most important food crops, yet maintaining plant productivity in this drought-sensitive crop has become a challenge. Competition for scarce water resources and the continued effects of global warming exacerbate current constraints on crop production. While plants’ response to drought in above-ground tissues has been well documented, the regulatory cascades in developing tubers have been largely unexplored. Using the commercial Canadian cultivar ‘Vigor’, plants were subjected to a drought treatment under high-tunnels causing a 4 ℃ increase in canopy temperature when compared to the well-watered control. Tubers were sampled for RNAseq and metabolite analysis. Approximately 2600 genes and 3898 transcripts were differentially expressed by at least four-fold in drought-stressed potato tubers, with 75 % and 69 % being down-regulated respectively. A further 229 small RNAs were implicated in gene regulation during drought. The comparison of protein homologues between Solanum tuberosum L. and Arabidopsis thaliana L. indicates that downregulated genes are associated with phenylpropanoid, carotenoid, and patatin biosynthesis. This suggests that there may be nutritive implications to drought stress occurring during the potato tuber bulking phase in sensitive cultivars.

Childhood nutrition is a cornerstone of long-term health, yet many children exhibit reluctance to consume healthy foods such as vegetables. This aversion can be influenced by various factors, including food neophobia and the sensory and visual appeal of the foods presented. Understanding how visual cues affect children's willingness behaviors can provide insights into effective strategies to enhance their dietary habits. This study aims to investigate the liking and emotional responses on the relationships between intrinsic and extrinsic cues and children's willingness to eat and to ask parents to buy. To understand how these factors influence children with food neophobia food-related behaviors and to identify effective strategies to promote healthier eating habits. A sample size consisting of 420 children recruited was needed in this cross-sectional study. A validated and reliable self-administered questionnaire was employed. Independent t-test and ANOVA were used to test the differences between gender and food neophobia means. Spearman correlations were used for correlation analysis. Hierarchical regression analyses were conducted to explore the relationships among intrinsic cues, extrinsic cues, and the mediating effect of liking and emotional responses. Attributes such as plate color and shape significantly influence children's food-related behaviors and their emotions. Liking and emotional responses significantly mediates the relationship between intrinsic/extrinsic cues and willingness. Positive visual cues experiences are crucial for increasing children's inclination to purchase and consume. Positive emotional responses enhance acceptance and purchase. There are significant differences between boys and girls. Boys prefer blue and triangular plates, while girls prefer pink plates and generate more positive emotions. Children with food neophobia will initially experience a disorder, but its negative effects can be mitigated by increasing sensory appeal and emotional engagement. By employing strategies designed to enhance visual cues and liking and emotions, children’s willingness to choose healthy eating habits can be effectively increased.

A significant attention has been made to the accurate detection of diabetes which is a big challenge for the research community to develop a diagnosis system to detect diabetes in a successful way in the IoT e-healthcare environment. Internet of Things (IOT) has emerging role in healthcare services which delivers a system to analyze the medical data for diagnosis of diseases applied data mining methods. The existing diagnosis systems have some drawbacks, such as high computation time, and low prediction accuracy. To handle these issues, we have proposed a IOT based diagnosis system using machine learning methods, such as preprocessing of data, feature selection, and classification for the detection of diabetes disease in e- healthcare environment. Model validation and performance evaluation metrics have been used to check the validity of the proposed system. We have proposed a filter method based on the Decision Tree (Iterative Dichotomiser 3) algorithm for highly important feature selection. Two ensemble learning Decision Tree algorithms, such as Ada Boost and Random Forest are also used for feature selection and compared the classifier performance with wrapper based feature selection algorithms also. Machine learning classifier Decision Tree has been used for the classification of healthy and diabetic subjects. The experimental results show that the Decision Tree algorithm based on selected features improves the classification performance of the predictive model and achieved optimal accuracy. Additionally, the proposed system performance is high as compared to the previous state-of-the-art methods. High performance of the proposed method is due to the different combinations of selected features set and GL, DPF, and BMI are more significantly important features in the dataset for prediction of diabetes disease. Furthermore, the experimental results statistical analysis demonstrated that the proposed method would be effectively detected diabetes disease and can easily be deployed in IOT wireless sensor technologies based e-healthcare environment.

Ganoderma boninense is the major causal agent for the basal stem rot (BSR) disease in oil palm, causing the progressive rot of the basal part of the stem. Despite its prominence, key pathogenicity determinants for the aggressive nature of hemibiotrophic infection remain unknown. In this study, genome sequencing and annotation of G. boninense T10 were carried out using the Illumina sequencing platform and comparative genome analysis was performed with previously reported G. boninense strains (NJ3 and G3). The pan-secretome of G. boninense was constructed and comprised of 937 core orthogroups, 243 accessory orthogroups, and 84 strain-specific orthogroups. A set of core candidate effector proteins (CEPs) were found to be enriched with catalytic protein classified as the carbohydrate-active enzymes, hydrolases as well as non-catalytic proteins. Differential expression analysis revealed an upregulation of CEP genes which was linked to the suppression of PTI signaling cascade while the downregulation of CEP genes was linked to the inhibition of PTI by preventing host defense elicitation. Genome architecture analysis revealed the one-speed architecture of the G. boninense genome and the lack of preferential association of CEP genes to the transposable elements. The findings obtained from this study would aid in the characterization of pathogenicity determinants and molecular biomarkers of BSR disease.

Societal changes have had effects on deaths from all causes in Russia. Up until now, deaths from all causes have been well researched, although several inconsistencies persist on the contributions of researchers. This study assessed research output, trends and topics that shaped deaths from all causes studies in Russia. Using bibliometric and topic modelling approaches, deaths from all causes in Russia published from 1914 to date was analysed using data on publications, citations, journals, keywords co-occurrence, year of publication, institutional affiliations, and country of origin from Scopus. Overall results indicate a steady growth of publications in Russia was documented after 1985. The h-index of some top 10 authors did not surpass single digits. A network visualisation map showed that ‘Russia’, ‘male’, ‘mortality’ and ‘human’ were the most commonly encountered vital terms. Of the ten most prolific authors, McKee M, Shkolnikov VM, Bobak M, Samorodskaya IV and Andreev E were the first five. Although the top 10 journals researching on death causes in Russia were Russian, these journals were not included in the most cited journals. The most prolific institutions studying deaths in Russia included; Tehran University of Medical Sciences, London School of Hygiene and Tropical Medicine, University College London, Max Planck Institute for Demographic Research and National Research University-Higher School of Economics. Findings suggest that deaths from all causes research attention in Russia increased in recent years, but the number of publications and research related engagements (e.g., networking and/ collaboration) does not match-up to other countries (e.g., UK, US, Germany). This research lag calls for more collaborative research between public health disciplines and networking among researchers (i.e., both national and international).

Chronic fatigue and fibromyalgia symptoms frequently occur in major depressive disorder (MDD). The pathophysiology of these symptoms may in part, be ascribed to activated immune pathways, although it is unclear whether muscular factors play a role in their onset. The aim of the present study is to examine the role of muscle proteins in major depression in association with symptoms of chronic fatigue and fibromyalgia. We measured serum levels of agrin, talin-2, titin, and creatine phosphokinase (CPK) as well as the FibroFatigue (FF), the Hamilton Depression Rating Scale (HAM-D) and the Beck Depression Inventory (BDI-II) in 60 MDD patients and 30 healthy controls. The results show a significant increase in agrin and talin-2 in MDD patients as compared with controls. There were highly significant correlations between agrin and HAM-D, BDI-II and FF scores. Agrin, but not talin or titin, was significantly and positively associated with all 12 items of the FF scale. We found that a large part of the variance in HAM-D (47.4%), BDI-II (43.4%) and FF (43.5%) scores was explained by the regression on agrin, smoking, female sex (positively associated) and education (inversely associated). CPK was significantly and inversely associated with the total FF score and with muscle and gastro-intestinal symptoms, fatigue, a flu-like malaise, headache and memory, autonomic and sleep disturbances. These results suggest that aberrations in neuromuscular (NMJs) and myotendinous junctions may play a role in MDD and that the aberrations in NMJs coupled with lowered CPK may play a role in symptoms of chronic fatigue and fibromyalgia in MDD. Moreover, the increase of agrin in MDD probably functions as part of the compensatory immune-regulatory system (CIRS).

Over the last three decades, special economic zones (SEZs) have given new impetus to the ever-growing export-oriented industrialization in developing countries. Where various economies have benefited from SEZs, many zones have ended up becoming enclaves with trifling advantage. The SEZs in Pakistan have experienced the same fate and failed to contribute to exports, employment and creating linkages with the domestic economy. Recently under China Pakistan Economic Corridor (CPEC), SEZs are proposed to be set up in Pakistan; with a hope to fuel the stuttering economy. However, it is pertinent to first understand the local context and device policies considering stakeholders' perspectives. This study aims to identify the factors for the successful implementation of SEZs derived from the regional context of Pakistan. In-depth interviews are conducted from most relevant stakeholders, who have been involved in the development of SEZs. The results pointed towards the removal of political influence over zones and government taking the lead role in deciding the types of industry to be invited in these zones. Each zone should have a clear vision of development based on its regional advantage. The zone promotions should be based on competitiveness rather than fiscal incentives. Joint ventures and PPP to be encouraged inside the zones for sustainable operations.

The regulation of apoptosis depends upon the Bcl-2 protein family. The process of cell death and survival is highly complicated and regulated by various types of extrinsic as well as intrinsic network of biological system. Several enzymes and regulators play crucial role in cell death and survival cycle not only in healthy but also in pathological state particularly in cancer. In cancerous cells, various proto-oncogenes and anti-apoptotic proteins are activated and responsible for the cell survival and longevity. The mechanism of activation and inactivation of various proteins in cell survival is regulated by the process of phosphorylation (kinases) and dephosphorylation (phosphatases). The current review will summarize the dynamics of Bcl-2 phosphorylation and its role in apoptosis and cell survival.

Bile acids (BA) are classically known as an agent important in lipid absorption and cholesterol metabolism. Nowadays, BAs have been found to be involved in various cellular signaling pathways such as protein kinase cascades, cyclic AMP (cAMP) synthesis and calcium mobilization. In addition, they have also been shown to regulate glucose and energy homeostasis. Bile acids are ligands for several nuclear hormone receptors, including FXR. Recently, muscarinic receptor and TGR5, G-protein-coupled receptor (GPCR), have been suggested to play a role in bile acid activity which is independent of nuclear hormone receptors. Moreover, BAs have also been studied in other GPCR associated pathways, namely sphingosine-1-posphate and glucagon receptor. Hydrophobic bile acids have been proven to affect heart rate and its contraction. Elevated bile acids are associated with arrhythmias in adults and fetal heart. Altered ratios of primary and secondary bile acid are reported in chronic heart failure patients. Meanwhile in patients with liver cirrhosis, cardiac dysfunction has been strongly linked to the increase of serum bile acid concentrations. In contrast, the most hydrophilic BA known as ursodeoxycholic acid has been found beneficial in improving peripheral blood flow in chronic heart failure patients and protecting heart against reperfusion injury.

Robot Operating System 2 (ROS 2) is a robotic software that uses a set of Quality of Service (QoS) policies to manage the quality of robot data transmissions in a network, such as the RELIABLE and KEEP_LAST options. In ROS 2 node communication, the RELIABLE connection guarantees that all message data can be properly sent from the publisher to the subscriber. However, strict reliability is not guaranteed if the RELIABLE connection uses the KEEP_LAST option to transmit the robot data in the publish-subscribe communication. This study aims to analyze the efficiency of local cache, cache control, and QoS balancing optimization to improve ROS 2 node communication when using the RELIABLE and KEEP_LAST options to transmit multi-robot data in Aggregated Robot Processing (ARP) architecture. Our idea in local cache and cache control is to streamline the sensor data output before processing it when the sensor device produces the data with the same value in a row. Furthermore, QoS balancing optimization aims to balance the DEPTH and DEADLINE QoS configuration to determine the rates and buffer size in ROS 2 node communication. This study shows that combining local cache and QoS balancing optimization improves multi-robot data transmission and cooperation in ARP architecture.

The fidelity of the decadal experiment in Coupled Model Intercomparison Project Phase-5 (CMIP5) has been examined, over different climate variables for different temporal and spatial scales, in many previous studies. However, most of the studies were for the temperature and temperature-based climate indices. A quite limited study was conducted on precipitation of decadal experiment and no attention was paid to a catchment level. This study evaluates the performances of eight GCMs (MIROC4h, EC-EARTH, MRI-CGCM3, MPI-ESM-MR, MPI-ESM-LR, MIROC5, CMCC-CM, and CanCM4) for the monthly hindcast precipitation of decadal experiment over the Brisbane River catchment in Queensland, Australia. First, the GCMs datasets were spatially interpolated onto a spatial resolution of 0.050×0.050 (5 km× 5 km) matching with the grids of observed data and then were cut for the catchment. Next, model outputs are evaluated for temporal skills, dry and wet periods, and total precipitation (over time and space) based on the observed values. Skill test results reveal that model performances varied over the initialization years and showed comparatively higher scores from the initialization year 1990 and onward. Models with finer spatial resolutions show comparatively better performances as opposed to the models of coarse spatial resolutions where MIROC4h outperformed followed by EC-EARTH and MRI-CGCM3. Comparing the skills, models are divided into three categories (Category-I: MIROC4h, EC-EARTH, and MRI-CGCM3; Category-II: MPI-ESM-LR and MPI-ESM-MR; and Category-III: MIROC5, CanCM4, and CMCC-CM). Three multimodel ensembles’ mean (MMEMs) are formed using the arithmetic mean of Category-I (MMEM1), Category-I and II (MMEM2), and all eight models (MMEM3). The performances of MMEMs are also assessed using the same skill tests and MMEM2 performed best which suggests evaluating the models before the formation of MMEM.

IL1RA intron 2 86-bp repeat and IL4 intron 3 70-bp repeat are VNTRs that have been associated with various diseases, but their role in obesity is elusive. The objective of this study was to investigate the association of IL1RA and IL4 VNTRs with obesity and adiposity in 315 Malaysian subjects (128 M/187 F; 23 Malays/251 ethnic Chinese/41 ethnic Indians). The allelic distributions of IL1RA and IL4 were significantly different among ethnicities, and the alleles were associated with total body fat (TBF) classes. Individuals with IL1RA I/II genotype or allele II had greater risk of having higher adiposity - even after controlling for ethnicity [Odds Ratio (OR) of I/II genotype = 12.21 (CI = 2.54, 58.79; p = 0.002); II allele = 5.78 (CI = 1.73, 19.29; p = 0.004)]. However, IL4 VNTR B2 allele was only significantly associated with overall adiposity status before adjusting for ethnicity [OR = 1.53 (CI = 1.04, 2.23; p = 0.03)]. TBF was also significantly higher in those with IL1RA II allele compared with I allele (31.79 ± 2.52 vs. 23.51 ± 0.40; p = 0.005). Taken together, IL1RA intron 3 VNTR seems to be a genetic marker for overall adiposity status in Malaysian subjects.

The effects of carbon fiber hybridisation on the thermal properties of woven kenaf reinforced epoxy composites kenaf fibre were studied. Woven kenaf hybrid composites at the different weave designs of plain and satin, and fabric count of 5 × 5 and 6 × 6 were manually prepared by vacuum infusion technique. Thermal properties of pure carbon fibre and hybrid composites were conducted by using thermogravimetric analyser (TGA) and differential scanning calorimeter (DSC). It was found that at high kenaf fibre content showed better thermal stability while the highest thermally stable was found in pure carbon fibre composite. The TG and DTG results showed that the amount of residue decreased in plain-designed hybrid composite compared to satin-designed hybrid composite. The DSC data revealed that the presence of woven kenaf increase decomposition temperature.

In the radar system, detection represents a basic and important stage in the receiver side. The detection process is based on the thresholding criteria; two philosophies of this criteria, constant and adaptive threshold. The constant threshold is simple in design, but it has a mis-detection and does not control the false alarm rate. As for the adaptive threshold, it is powerful in target detection, and better control of the false alarm rate, where it is called Constant False Alarm Rate (CFAR). Lots of research in the CFAR design, but the gap in the previous works is that there is no CFAR algorithm can be working with all or most environmental fields and all or most target situations.In this paper, The CFAR, which can work with the most environment and most of the target situations, has been presented. The producing the design and implementation of the new practical CFAR processor is presented. Where, the new CFAR is a combination of the properties of three different CFAR algorithm (CA, OSGO, and OSSO), and from two different families; averaging and statistical. Where it has overperformed of it's is 97.25% for simulation and 96.25% for the implementable version for different target situations. The simulation analysis is made by using Matlab 2015, while the implementation is done by using Xilinx Spartan 700 3a.

Oil spillage over a sea or ocean’s surface is a threat to marine and coastal ecosystems. Spaceborne synthetic aperture radar (SAR) data has been used efficiently for the detection of oil spills due to its operational capability in all-day all-weather conditions. The problem is often modeled as a semantic segmentation task. The images need to be segmented into multiple regions of interest such as sea surface, oil spill, look-alikes, ships and land. Training of a classifier for this task is particularly challenging since there is an inherent class imbalance. In this work, we train a convolutional neural network (CNN) with multiple feature extractors for pixel-wise classification; and introduce to use a new loss function, namely ‘gradient profile’ (GP) loss, which is in fact the constituent of the more generic Spatial Profile loss proposed for image translation problems. For the purpose of training, testing and performance evaluation, we use a publicly available dataset with selected oil spill events verified by the European Maritime Safety Agency (EMSA). The results obtained show that the proposed CNN trained with a combination of GP, Jaccard and focal loss functions can detect oil spills with an intersection over union (IoU) value of 63.95%. The IoU value for sea surface, look-alikes, ships and land class is 96.00%, 60.87%, 74.61% and 96.80%, respectively. The mean intersection over union (mIoU) value for all the classes is 78.45%, which accounts for a 13% improvement over the state of the art for this dataset. Moreover, we provide extensive ablation on different Convolutional Neural Networks (CNNs) and Vision Transformers (ViTs) based hybrid models to demonstrate the effectiveness of adding GP loss as an additional loss function for training. Results show that GP loss significantly improves the mIoU and F1 scores for CNNs as well as ViTs based hybrid models. GP loss turns out to be a promising loss function in the context of deep learning with SAR images.

Objectives: The present study was performed to compare between two different fixation techniques and evaluate the histopathological changes which occur in temporomandibular joint (TMJ) of the dogs after surgically induced unilateral subcondylar fracture. Methods: Twenty- One healthy beagle male dogs with a mean age of 30 months were used in the present study. One of these animals was sacrificed to study the normal histology of the dog TMJ. The rest of the animals (20 animals) were operated on to induce a displaced unilateral subcondylar fracture then, the animals were randomly equally divided into 2 groups. After surgery, 5 dogs of each group were sacrificed at 2 months after surgery (Short-Term), while the remaining 5 were sacrificed at 4 months after surgery (Long-Term). The heads were separated and fixed, oscillating saw was used to articulate the entire TMJ. Specimens were decalcified, then the specimens were washed, grossed and sectioned in a sagittal plane. Tissue sections of 4 um thick were cut and stained with Hematoxylin and Eosin to be studied microscopically. Results: In group I animals, at 2 months after surgery, there was a marked hypertrophy of the articular fibrous covering of the condylar head, while at 4 months after surgery, the articular fibrous covering appeared thinner than normal, with marked decrease in thickness of the articular cartilage layer. In group II, at 2 months after plate insertion, the articular fibrous covering became hypertrophic, and the articular cartilage was markedly reduced but it was of a uniform thickness, while at 4 months after subcondylar fracture and plate fixation, no significant changes could be detected either in thickness or structure of the articular fibrous covering. Conclusion: Based on this study, it is obvious that the plate fixation group gave the most favorable results, when compared with maxillomandibular fixation (MMF) group.

Due to the prospective local and international markets, the neon tetra fish breeding industry has its own allure for fish lovers and as a side business. The goal of the study was to analyze the opportunities and difficulties associated with neon tetra fish farming in order to build a "Blue Economy" policy. The Depok City Food Security and Fisheries Service (DKP3) program was implemented with the help of key informants who were chosen based on the following criteria: 1) DKP3 Officials, such as the Board of Trustees of the Fish Farming Group (POKDAKAN), 2) Researchers from the BRBIH (Ornamental Fish Farming Research Center), 3) Practitioners/Extension Workers, and 4) POKDAKAN.The study's conclusions state that the relevant Dinas must support local policies based on natural identification that are strengthened at the national level, that routine human resource training needs to be improved, that technology needs to be taken into account in collaboration with the private sector, and that post-harvest and market access are essential for industry. The SWOT analysis's findings, which are in quadrant 1, show that the firm is in a position for rather aggressive expansion.

Anemia is a well-developed discipline where the concepts of precision medicine have, in part and being studied extensively. This review discusses the treatment of EPO-deficient anemia and resistance in Chronic Kidney Disease (CKD). Traditionally, erythropoietin-stimulating agents (ESA) and iron supplementation have been used to manage anemia in CKD. However, these treatments have potential risks, including cardiovascular and thromboembolic events. Newer treatments have emerged to address these risks, such as slow-release and low-dosage intravenous iron, oral iron, and erythropoietin-iron combination therapy. Another novel approach is using hypoxia-inducible factor prolyl hydroxylase inhibitors (HIF-PHI). This review highlights the need for precision medicine targeting genetic components of EPO-deficient anemia in CKD and discusses individual variability of genes such as the erythropoietin gene (EPO), Interleukin-β gene (IL-β), and hypoxia-inducible factor gene (HIF). Pharmacogenomics testing aims to provide targeted therapies and interventions that are tailored to the specific characteristics of an individual, optimizing treatment outcomes and minimizing resistance and adverse effects. The article concludes by suggesting the potential of receptor modification to revolutionize treatment outcome of erythropoietin deficiency anemia through integration of the mentioned approach.

We investigate new graph characteristics namely total (vertex, edge) face irregularity strength of gen- eralized plane grid graphs Gmn under k-labeling Phi of type (Alpha, Beta, Gamma). The minimum integer k for which a vertex-edge labelled graph has distinct face weights is called the total face irregularity strength of the graph and is denoted by tfs(Gmn). In this article, the graphs G = (V;E; F) under consideration are simple, fi nite, undirected and planar. We will estimate the exact tight lower bounds for the total face irregularity strength of some families of generalized plane grid graphs.

Purpose: A novel coronavirus, SARS-CoV-2 was identified as the cause of COVID-19 eventually led to the declaration of Public health emergency of international concern and a pandemic by WHO due to its exponential global spread. Present study was conducted to investigate the impact of second wave of pandemic on mental wellbeing and social behaviors among university students of Pakistan during this crucial period of COVID-19 infection. Methods: A cross-sectional analytical study was designed to evaluate the psychosocial impact during the current COVID-19 outbreak among the students of The Islamia University of Bahawalpur, Pakistan. Snowball sampling or chain referral sampling procedure was adopted to recruit the participants in the study. Verbal informed consent was taken from all participants before recruitment in the study irrespective of their gender, age and socioeconomic status. Results: Mental health of university students during COVID-19 epidemic was affected to a varying degree revealing that 26.66% were recorded to have mild, 27.15% moderate and 17.04% suffering from severe anxiety out of total 1029 students. Students who were residing in urban areas with parents and having a steady family income were negatively associated and found protective factors against anxiety. However, having a relative or an acquaintance infected with COVID-19 was an independent risk factor for experienced anxiety. Positively associated factors with the level of anxiety symptoms included economic stressors, effects on daily-life, and academic delays whereas social support was negatively correlated with anxiety in COVID-19 related stressors. Conclusion: Public health emergencies and such pandemic are exerting serious psychological impacts on university students. It is recommended that the higher authorities should plan better policies to reduce this impact for the provision of high quality and timely crisis-oriented psychological services to university students.

Greenwater (splashing of water on the deck) loading is a classical problem faced by the designer of ship-shaped vessels, which becomes even worst when the vessel operates at harsh weather conditions for an extended period. Installation of breakwaters on the deck can play a crucial role in minimizing this impact. However, research on the design and optimization of the breakwater is still at its infancy, and this study aims at shedding further light on this area by proposing and analyzing the effectiveness of three breakwater designs on a fixed box-shaped vessel. Commercial CFD software is used for this investigation. However, the design model (without breakwater) was validated at first against experimental results of green water splashing, before performing the actual simulations with proposed breakwater design. A vertical plate is used as the deck structure, and greenwater pressure at several locations on that plate is measured to compare the effectiveness of various breakwater designs. Overall, breakwaters with openings (perforations, grillages etc.) found to be more effective in minimizing the pressure generated by the greenwater. Nevertheless, there are significant rooms for improvement on breakwater designs, and some topics for further research are also suggested in this regard.

Hybrid woven kenaf-carbon composite were fabricated in this study using epoxy resin as matrix. Effects of different fabric material namely weave designs (plain and satin) and fabric counts (5×5 and 6×6) on the properties of laminated woven kenaf polymer composite were evaluated. This study evaluates the mechanical and morphological properties of hybrid fabric kenaf-carbon from kenaf yarn of 500tex. Kenaf and carbon fabrics were used in this work, where vacuum infusion technique was selected to prepare the composite and epoxy resin was used as a matrix. The fibre weight content is 30% and four specimens were prepared for each samples and tested for their tensile, flexural, and impact strengths. The morphological properties of composites were analysed through the scanning electron microscope (SEM). The results revealed that plain woven fabric is favourable in terms of tensile and impact strengths compared to satin woven fabric. Meanwhile, 5×5 of fabric count gives better flexural modulus than composite fabricated with 6×6 fabric count. The morphologies of the fractured surface investigated by SEM demonstrated better adhesion properties and less fibre pull-out on plain woven fabric.

1) Background: A significant proportion of child laborers are compelled to work in exploitative environments, experience both deteriorating health and financial loss. The present study sought to determine the factors affecting child labour and the characteristics of their working environment. 2) Methods: A questionnaire survey was conducted with 80 child labourers aged 5 to 17 years. Alongside descriptive statistics, a newly devised technique known as Influencing Causes Index (ICI) was administered and tested. 3) Results: The startling demographic findings reveal that peak share of child labourers are young children (12-14 years) and 32.5% child laborers had never attended school. The thorough assessment of determinants reflects that not only poverty, but schooling expenses and lack of access opportunity to primary schools are also the top-ranked push factors to trigger children towards labour. Around 72.5% of children work for over 8 hours a day. A significant proportion of participants received no leave, training, or access to hygiene facilities. The existing pattern of employment and working conditions resulted in musculoskeletal pain and dermatological infections among child labourers (p&lt;0.05). 4) Conclusion: This research suggests that income measures for households, and an education programme for both children and parents would expedite the abolition of child labour.