Abstract: This Study attempts to tackle the most plausible timeframe of the biblical figure Abraham from a holistic point of view. We have employed the archeological, astronomical, environmental, and documentary evidence in arriving at our results. In doing so, we able to synchronize the most influential global forces with the real and original older historic sources like the chronologies of Manetho and Berrosus. Furthermore, key material culture changes were observed as tracers of major markers for civilization shift. We also consulted various signs from the holy scriptures as appropriate. The patriarchal chronology closely followed major shifts in Egyptian dynastic rotation. It was found that Abraham time was within the second Egyptian dynasty. The findings were confirmed by matching events from the Babylonian chronology, where he is found to have lived during Kish 2 dynasty. As a follow up on this result, we established the identity of Joseph as Imhotep, the vizier of king Djoser from the 3rd dynasty.

Introduction: Clinicians have been struggling with the optimal diagnostic approach of patients with suspected COVID-19. We evaluated the added value of chest CT over RT-PCR alone. Methods: Consecutive adult patients with suspected COVID-19 presenting to the emergency department (Academic Medical Center, Amsterdam University Medical Centers, the Netherlands) from March 16^th to April 16^th were retrospectively included if they required hospital admission and underwent chest CT and RT-PCR testing for SARS-CoV-2 infection. The CO-RADS classification was used to assess the radiological probability of COVID-19, where a score of 1-2 was considered as negative, 3 as indeterminate, and 4-5 as positive. CT results were stratified by initial RT-PCR results. For patients with a negative RT-PCR but a positive CT, serology or multidisciplinary discussion after clinical follow-up constituted the final diagnosis. Results: 258 patients with suspected COVID-19 were admitted, of which 239 were included because they had both CT and RT-PCR testing upon admission. Overall, 112 patients (46.9%) had a positive initial RT-PCR, and 14 (5.9%) had a positive repeat RT-PCR. Of 127 patients with a negative or indeterminate initial RT-PCR, 38 (29.9% [95%CI 21.3-39.3%]) had a positive CT. Of these, 13 had a positive RT-PCR upon repeat testing, and 5 had positive serology. The remaining 20 patients were assessed in a multidisciplinary consensus meeting, and for 13 it was concluded that COVID-19 was ‘very likely’. Of 112 patients with a positive initial RT-PCR result, CT was positive in 104 (92.9% [95%CI 89.3-97.5%]). Conclusion: In a high-prevalence emergency department setting, chest CT showed high probability of COVID-19 (CO-RADS 4-5) in 29.9% of patients with a negative or indeterminate initial RT-PCR result. As the majority of these patients had proven or ‘very likely’ COVID-19 after follow-up, we believe that CT helps in the identification of patients who should be admitted in isolation.

An analysis of the consistency of the Abraham and Minkowski momenta in the determination of the photon trajectory was carried out considering a new principle of conservation of the photon's mechanical energy, in which the photon conserves translational energy in orbital angular momentum when transiting between two media, introducing the relativistic energy wave (REW). The confrontation between REW and the recent theory of space-time waves (ST) was considered, pondering your differences. Throughout this study it was possible to verify that the Abraham momentum appears a relativistic photon ignition device in the transition between two media, acting as the hidden momentum of the Minkowski’s relativistic momentum. The wavy behavior in the matter is relativistic, and the relativistic trajectory appears with delays and advances, with points of synchronization between source-observer. The classical or relativistic trajectories are determined as a function of the angle of incidence and the relative refractive index, by one of two distinct non-additive torques, the classic by Abraham or the relativistic by Minkowski. It was found that the same analysis conducted under the principle of conservation of the mechanical energy of the photon can be treated by an new Doppler, Relativistic Apparent, that can be confused with other Dopplers in the treatment of redshift from distant sources. It was found that the conservation of energy in Orbital Angular Momentum (OAM), in the interaction with matter, explains that the synchronization instants are found in the inversion of the OAM, where the advances and delays of REW occur under negligible variations of the OAM, however, opposites.

Three-dimensional (3D) printing technology, also known as additive manufacturing (AM), has emerged as an attractive state-of-the-art tool for precisely fabricating functional materials with complex geometries, championing several advancements in tissue engineering, regenerative medicine, and therapeutics. However, this technology has an untapped potential for biotechnological applications, such as sensor and biosensor development. By exploring these avenues, the scope of 3D printing technology can be expanded and pave the way for groundbreaking innovations in the biotechnology field. Indeed, new printing materials and printers would offer new possibilities for seamlessly incorporating biological functionalities within the growing 3D scaffolds. Herein, we review the extrusion-based 3D printing modalities emphasizing biosensor applications. We highlighted the application of natural, synthetic, and composite biomaterials as 3D-printed soft hydrogels. Emphasis was placed on the approach by which the sensing molecules were introduced during the fabrication process. Finally, the future perspective was provided.

The aims of the study were to evaluate seedling growth and survival of Prunus africana provenances in awi highland based on ecological requirement of the tree. We measured survival and growth of three P.africana provenances seedlings found in Ethiopia (provenances sources namely: Gedeo, Jibat and Munnessa). Design of experiment with randomized complete block design (RCBD) with three replications. Seedlings planted at 2m, 2.5m and 3m distance between plants, plot, and blocks respectively. A plot size of 10mx10m and 25 plants are found per plot (0.01ha). We used ANOVA to test differences in survival, and growth among provenances over time. Results concluded that, provenances have no significant variation among in establishment rate, plant height and collar diameter growth. Of these provenances, Jibat was the first in establishment (56%), second in height (1.97m) and diameter (2.89cm). Gedeo was stood first in height (2.30m) but second in establishment rate (52%) and thickness(3.45cm), but Munessa with very good growth in diameter(3.59cm) might be prefreed for bark extraction followed by Gedeo, last in height (1.75m),but established second (52%). Contrary to expectations, seedlings were still at substantial risk of mortality ≥3 years after planting. Probably the plants survival rate and growth probably affected by altitude, soil water potential, light exposure, and wild animal presence in the surrounding. In steep slope sites, canopy shade, existing weed vegetation as well as wild animals such as apes is unlikely to enhance seedling survival after planting. Our results suggest that seedling mean growth increased with 0.008mm thickness and 0.41mm per day while 2.8mm thickness and 146.8mm tall increment recorded in 2560meter elevated high land or injibara with mean value of 18.5°C and rain fall is 1300mm.

Accurate determination of the concentration of alcohols and their metabolites is important in forensics and in several life science areas. A new method has been developed to quantify alcohols and their oxidative products using a headspace gas chromatography- mass spectrometer and isotope-labelled internal standards. This work demonstrates the application of this method, specifically in quantifying the concentration of oxidative products of alcohol and other minor alcohols found in hand sanitizers, which have become an essential household item since the COVID-19 pandemic. Apart from the major component, the minor alcohols found in hand sanitizers include methanol, isopropanol, and n-propanol. In ethanol-based hand sanitizers, a significant amount of acetaldehyde was observed as an oxidation product, while in isopropanol-based hand sanitizers, acetone was observed. The concentration of acetaldehyde in ethanol-based hand sanitizers significantly increased with storage time and temperature, whereas no such increase of acetone concentration was observed in isopropanol-based hand sanitizers with storage time and temperature.

A novel theoem is presented about a circle with four antipodal points, arbitrarily ordered counterclockwise (or clockwise), in a Euclidean plane.

Ptolemy’s Theorem in Euclidean geometry, named after the Greek astronomer and mathematician Claudius Ptolemy, is well known. We translate Ptolemy’s Theorem from analytic Euclidean geometry into the Poincar´e ball model of analytic hyperbolic geometry, which is based on M¨obius addition. The translation of Ptolemy’s Theorem from Euclidean geometry into hyperbolic geometry is achieved by means of the hyperbolic trigonometry, called gyrotrigonometry, to which the Poincar´e ball model gives rise, and by means of the duality of trigonometry and gyrotrigonometry.

The present cultivated enset clonal landraces in Ethiopia originated from few wild progenitors. However, enset has a mixed mode of reproduction in which, the wild enset reproduces sexually through seeds, while cultivated enset is generally propagated vegetatively. The objective of this study was to understand the genetic structures of enset cultivars and estimate their genetic variability by evaluating the morphological data generated from progenies of cultivated and wild enset clones. Hence, seeds collected from six cultivated and four wild enset genotypes were used for this study. Data on four qualitative and six quantitative morphological traits were recorded from the progenies of the 10 enset genotypes. Progenies of seven enset genotypes segregated with 3:1 genetic ratio while progenies of the remaining genotypes segregated differently for the qualitative traits considered. With regard to the quantitative traits, the progenies of the 10 enset genotypes differed significantly for five of the six traits except pseudostem length. Generally the cultivated clones performed better than the wild types. This study demonstrated the possibility of creating genetic variation through selfing of the existing clones of enset for traits of interest and makes improvements either through selection or crossing the elite types to develop novel cultivar

A cyclic antipodal points of a circle is a pair of points that are the intersection of the circle with a diameter of the circle. A recent proof of Ptolemy’s Theorem, simultaneously in both (i) Euclidean geometry; and (ii) the relativistic model of hyperbolic geometry (which is identified with the Klein model of hyperbolic geometry), motivates in this article the study of four cyclic antipodal points of a circle, ordered arbitrarily counterclockwise. The translation of results from Euclidean geometry into hyperbolic geometry is obtained by means of hyperbolic trigonometry, called gyrotrigonometry, to which Einstein addition gives rise. Formulas that extend the Pythagorean formula in both Euclidean and hyperbolic geometry are obtained as byproducts

This study have uniquely mad use of Box-Jenkins ARIMA models to address the core of the threes objectives set out in view of the focus to add meaningful value to knowledge exploration. The outcome of the research have testify the achievements of this through successful nine months out-of-sample forecasts produced from the program codes, with indicating best model choices from the empirical estimation. In addition, the results also provide description of risks produced from the uncertainty Fan Chart, which clearly outlined possible downside and upside risks to tourist visitations in the country. In the conclusion, it was suggested that downside risks to the low level tourist arrival can be managed through collaboration between authorities concerned with the management of tourist arrivals in the country.

The research was carried out in southern Ethiopia to determine farmers' preferences for indigenous legume, fodder trees and shrubs (ILFTS), as well as the relationship between local feed valuation and scientific parameters. A focus group discussion (FGD) was conducted with ten farmers in each agro-ecological zone to determine the benchmarks for the preference ratings. The respondent farmers used the preference score sheet to rate all ILFTS on an individual basis. Twenty farmers with extensive experience in ILFTS took part in the preference score rating of each plant species in each agroecosystems. Dry matter (DM), organic matter (OM), Ash, crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF), acid detergent lignin (ADL), and metabolizable energy (ME) content of the samples were determined. The standard two-stage in vitro approach was used to measure the in vitro dry matter digestibility (IVDMD) of samples. ANOVA was used to analyze the variation among the species in agroecosystems. Farmers evaluated the ILFTS using a variety of parameters, according to the study (feed value, growth rate, biomass output, compatibility, and multifunctionality). The farmers ILFTS preference score on the evaluation criteria differed considerably (P<0.05) with species in agroecosystems. The nutritive value of ILFTS was in the acceptable range for feeding ruminants although exhibited a wide variation among the species in agroecosystems. The CP content was above the minimum requirement (8%) to support the normal function of rumen microorganisms. Moreover, CP exhibited positive significant correlation with IVDMD, IVOMD, and DOMD unlike CT and ADL which exhibited negative significant correlation. Thus, ADL and CT were identified as feed fractions that inhibit IVDMD either by depressing the activity of rumen microorganisms or restricting enzyme access to cell wall components. Conversely, the DM, OM, CP, IVDMD, IVOMD, DOMD, and ME were shown a positive significant correlation with farmers feed preference score, unlike the ADL and CT which exhibited a negative significant correlation. In conclusion, Farmers' indigenous knowledge of feed value is therefore relevant to some extent for judging the nutritive value of the ILFTS and could complement the scientific indicators.

Lake Chapala is a natural ecosystem of Mexico, declared Ramsar site, currently, is an area with importance in the agricultural sector, tourism, and important source of drinking water in the Metropolitan area of Guadalajara, considered as a thermo regulatory body. This study used tools such as Rhtest, as well as analyzing extreme climate indices using RClimdex. In addition, the relationship with the change in water surface of Lake Chapala was assessed through the NDWI index, using Landsat images, between 1985 and 2018. According to the obtained results, the signs of climatic variability are detected in the study region, which, directly affects the basin runoff and water levels in the lake, as well as, the factor of water overexploitation in the basin, so it is considered that the lake conditions mostly depend on the type of management that is given to the resource. Finally, the results will help the understanding of climate variability and its water resources influence of the Lerma Chapala basin, which will assist in future research.

This study focused on evaluating the potential of natural fermentation of pea flour (F) to improve the release of antioxidant compounds. Two fermentation conditions of F were performed: 1: 36.4% w/w, 24 h, 30°C (FF1); 2: 14.3% w/w, 24 h, 37°C (FF2); pH values decreased to 4.4-4.7, with a predominance of lactic acid bacteria. An increment of the proteolysis degree (TNBS method) (greater for FF2), polypeptides aggregation and decrease of solubility, increase of &lt; 2 kDa peptides, and increase in the ORAC potency of PBS-soluble fractions after fermentation was demonstrated. After simulated gastrointestinal digestion (SGID, COST-INFOGEST), FF1D and FF2D showed greater proteolysis degrees (63 and 53%) than F1D and F2D (45%), with differences in the molecular composition of the different digests. ORAC and HORAC potencies increased in all cases. FF2D presented the greater ORAC value, with higher activities for &gt; 4 kDa, some in the range 2 to 0.3 kDa. and &lt; 0.10 kDa fractions. Fermentation also increased the 60 % ethanol extracted phenolic compounds, mainly flavonoids, and the ORAC activity. After SGID, the flavan-3-ols disappeared but some phenolic acids increased respect to F. Fermentation in condition 2 was considered the most appropriate to obtain a functional antioxidant ingredient.

Polyamines are nitrogen-rich polycationic ubiquitous bioactive molecules with diverse evolutionary-conserved functions. Their activity interferes with numerous genes' expression resulting in cell proliferation and signaling modulation. The intracellular levels of polyamines are precisely controlled by evolutionary-conserved machinery. Their transient synthesis is induced by heat stress, radiation, and other traumatic stimuli in a process termed the polyamine stress response (PSR). Notably, polyamine levels decline gradually with age; and external supplementation improves lifespan in model organisms. This corresponds to cytoprotective and reactive oxygen species scavenging properties of polyamines. Paradoxically, age-associated neurodegenerative disorders are characterized by an upsurge in polyamine levels, indicating polyamine pleiotropic, adaptive, and pathogenic roles. Specifically, arginase overactivation and arginine brain deprivation have been shown to play an important role in Alzheimer’s disease (AD) pathogenesis. Here, we assert that a universal short-term PSR associated with acute stimuli is beneficial for survival. However, it becomes detrimental and maladaptive following chronic noxious stimuli, especially in an aging organism. Furthermore, we regard cellular senescence as an adaptive response to stress and suggest that PSR plays a central role in age-related neurodegenerative diseases' pathogenesis. Our perspective on AD proposes an inclusive reassessment of the causal relationships between the classical hallmarks and clinical manifestation. Consequently, we offer a novel treatment strategy predicated upon this view and suggest fine-tuning of arginase activity with natural inhibitors to preclude or halt the development of AD-related dementia.

Despite a global push in the development and implementation of widespread alternative energy use, significant disparities exist across given nation-states. These disparities reflect both technical and economic factors, as well as the social, political, and ecological gaps between how communities see energy development and national/global policy goals. Known as the “local-national gap,” many nations struggle with fostering meaningful conversations about the role of alternative energy technologies within communities. Mitigation of this problem first requires understanding the distribution of existing alternative energy technologies at the local level of policymaking. Using the State of Georgia, U.S.A. as a case study, we present a model for analyzing how existing adoption trends enable/limit conversation at the scale of local governance (i.e., county governments). Leveraging existing work on the Gini Coefficient as a metric for measuring energy inequity, we argue these tools can be applied to analyze where gaps exist in ongoing solar adoption trends. As we demonstrate, communities that adopt solar tend to be concentrated in a few counties, indicating existing conversations are limited to a circumscribed set of social networks. This information and the model we demonstrate can enable focused qualitative analyses of existing solar trends, not only amongst high-adoption areas but within communities where little to no adoption has occurred.

The members within the genus Thermoanerobacter have been much less investigated for protein and amino acid metabolism as compared with carbohydrates. The present study investigates the biotechnological potential of Thermoanaerobacter mathranii (DSM 11426) concerning its ability to produce high energy alcohols from amino and fatty acids. End-product formation was analyzed from glucose in the presence and absence of butyric acid as well as from selected proteins, and all amino acids. T. mathranii did not degrade any of the proteins tested to a large extent but de-grade several amino acids, namely serine and the branched-chain amino acids (leucine, isoleu-cine, valine) when cultivated in the presence of thiosulfate. The main end products from the branched-chain amino acids were a mixture of their corresponding branched-chain fatty acids and alcohols. 13C2-labeled leucine revealed that the strains degraded the amino acid in the pres-ence of thiosulfate, producing 3-methyl-1-butyrate, which was then used as an electron acceptor which led to the accumulation of 3-methyl-1-butanol. The strain is highly ethanologenic, pro-ducing more than 1.2 mol ethanol per mol of glucose degraded. The strain was able to reduce volatile fatty acids during glucose fermentation to their corresponding alcohol, further suggest-ing this strain may be of greater biotechnological value beyond bioethanol production.

Cultural heritage is a fundamental part of the society’s identity, and its conservation is of great relevance as it transcends time and memory. To minimize its deterioration, cultural heritage has traditionally undergone diverse preservation and maintenance treatments and the attention of researchers to develop new and innovative methods for state diagnosis and protection treatments has been increasing in the recent decades. Therefore, in this study, a literature review using a bibliometric analysis and LDA methodology was conducted to systematically map scientific research outputs on cultural heritage conservation and protection. Data was retrieved from the Scopus database and the annual publications, countries, most-cited publications, authors, institutions, and keywords have been comprehensively analyzed, leading to the detection of research trends. Findings show an increasing number of studies in this field in the last decades, particularly since 2010. Italy, home to the largest number of UNESCO heritage sites, is the most prolific country. Most of the studies are related to metal, paper and stone as substrate to be protected. Significant progress has been made in understanding the deterioration processes through precise diagnosis and the development of innovative treatments for protection. In this sense, latest trends have been detected such as the use of non-invasive techniques for diagnosis and the use of nanotechnology and nature-based treatments for the conservation treatments.

Persistent post market quality evaluation helps produce clear information on the current quality status of the different brands of a given drug and hence introduces biopharmaceutically and therapeutically equivalent list of the products to the prescribers and users of it. This in turn facilitates access to essential medicines by breaking the high cost barrier imposed by few expensive brands of the product. This study was aimed at determining the quality and evaluating equivalence of doxycycline hyclate capsules and tablets in Jimma, Ethiopia. Ten brands of doxycycline hyclate capsules and tablets were tested for physic-chemical parameters. All investigated brands of doxycycline complied with the USP for dosage unifor¬mity, assay of active ingredient and single-point dissolution tests. One brand, D09 failed both hardness and friabilty tests. Comparisons of dissolution profiles applying fit factors confirmed that only brands D04, D06 and D07 had similarity with innovator. Ratio test approaches also showed significant variability existence between test products and comparators. This may question the product’s being categorized as a <biowaiver> to mean in-vitro dissolution evaluation suffices its market approval. This work, however, found equivalence problems between ‘comparators’ and interchangeability issues among doxycycline different brands already distributed in the market.

BACKGROUND: Retinoblastoma is a malignant tumour that develops from the immature cells of the retina. It is the most frequent type of paediatric intraocular cancer and is curable. Clinical and histological findings after enucleation of the affected eye dictate not only the patient's secondary care but also their prognosis. We assessed the clinical and histopathologic predictors of survival among children with retinoblastoma from two tertiary health facilities in Uganda. METHODS: This retrospective research utilized archived formalin fixed & paraffin embedded blocks of eye specimens enucleated between 2014 to 2016 at Mbarara University, pathology department and Ruharo Eye Centre. The specimens were then processed and stained with haematoxylin and eosin. The confirmation of retinoblastoma was made to include histologic stage and features of the tumor. Biographic data of the patients and the clinical features such as leukocoria, proptosis, phthisis, staphyloma, buphthalmos were retrieved from the records.RESULTS: Males (55.1%) dominated the study population (N=78). The median age was 31 months. The commonest clinical sign was leukocoria (69.2%) and the most abundant histopathological stage was stage 1 (41%). Optic nerve invasion 39.5%, choroidal invasion 29.5%, scleral invasion 7.7% and orbital extension 16.7% were seen. Flexner-Wintersteiner rosettes were seen in 24.6%. Necrosis was a prominent feature (71.2%). The two-year survival was estimated to be 62%. Leukocoria (RR 1.1), female gender (RR 1.4), intralaminar optic nerve invasion (RR 7.6) and a lack of orbital extension (RR- 7) were significant predictors of survival.CONCLUSION: Leukocoria and proptosis are noticeable clinical signs of retinoblastoma. Most patients present while in stage one although stage four presentation is also common. Leukocoria, optic nerve invasion, orbital extension, and gender are significant factors predictive of survival in patients with retinoblastoma.

Drops are the most important and most common energy dissipator in irrigation networks and erodible canals and consequently, their performance must be well understood. This study was designed to evaluate the capability of Artificial Intelligence (AI) methods including ANN, ANFIS, GRNN, SVM, GP, MLR, and LR to predict the relative energy dissipation (∆E/E0) in vertical drops equipped with a horizontal screen. For this study, 108 experiments were carried out to investigate energy dissipation with variable discharge, varying drop height, and porosity of the horizontal screens. Parameters yc/h, yd/yc, and p are considered as input variables and ∆E/E0 is the output variable. The efficiency of models was compared using Taylor's diagram, Box Plot of the applied error distribution, correlation coefficient (CC), mean absolute error (MAE) and root-mean-square error (RMSE). Results indicate that the performance of the ANFIS_gbellmf based model with CC value of 0.9953, RMSE value of 0.0069 and MAE value of 0.0042 was superior to other applied models. Also, the linear regression model with CC=0.9933, RMSE=0.0083, and MAE= 0.0067performs better than the multiple linear regression model in this study. Results of a sensitivity study suggest that yc/h is the most effective parameter for predicting ∆E/E0.

The capacitor-mismatch among diverse defects caused by the manufacturing process variations significantly affects the linearity of capacitor-array used to implement the capacitive digital-to-analog converter (CDAC) in the successive-approximation-register (SAR) analog-to-digital converter (ADC). Accordingly, the linearity of the SAR ADC is limited by that of capacitor-array, resulting in serious yield loss. This paper proposes an efficient foreground self-calibration technique to enhance the linearity of the SAR ADCs by mitigating the capacitor-mismatch based on the split ADC architecture along with variable capacitors. In this work, two ADC channels (i.e., ADC1 and ADC2) for the split ADC architecture include their capacitive DACs (CDACs) whose binary-weighted capacitor-arrays consist of variable capacitors. A charge-sharing SAR ADC is used for each ADC channel. In the normal operation mode, their digital outputs are averaged to be the final ADC output, as in a conventional split ADC. In the calibration mode, every single binary-weighted capacitor for the two ADCs is sequentially calibrated by making parallel or/and antiparallel connection among two or thee capacitors from the two channels. For instance, because the capacitors of the CDACs ideally exhibit the binary-weighted relation as Cn=2×Cn−1, variable capacitor Cn of ADC1 can be updated to be closest to the sum of Cn−1 of ADC1 and Cn−1 of ADC2 for the calibration. For the process, the two capacitor-arrays of the two ADCs can be reconfigured to be connected to each other, so that Cn of ADC1 can be connected with two of Cn−1 of ADC1 and ADC2 in antiparallel. The two voltages at the top and the bottom plates of the CDAC are compared by a comparator of ADC1, and the comparison results are used to update Cn. This process is iterated, until Cn is in agreement with the sum of two of Cn−1. Finally, all the capacitors can be calibrated in this way to have the binary-weighted relation. The simulation results based on the proposed work with a split SAR ADC model verified that the proposed technique can be practically used, by showing that the total-harmonic-distortion and the signal-to-noise-and-distortion ratio were enhanced by 21.8-dB and 6.4-dB, respectively.

Despite a global push in the development and implementation of widespread alternative energy use, significant disparities exist across given nation-states. These disparities, frequently referred to as the local-national gap, reflect both technical and economic factors, as well as the social, political, and ecological gaps between how communities see energy development and national/global policy goals. This dataset is an attempt to bridge the local-national gap regarding solar PV adoption in the state of Georgia (U.S.A.). This dataset is an aggregation of variables from seven different publicly-available sources that was designed to help researchers interested in the context underlying solar adoption on the local scale of governance (e.g. the county level). The SolarView database includes information necessary for informing policymaking activities such as solar installation information, a historical county zip code directory, county-level census data, housing value indexes, renewable energy incentive totals, PV rooftop suitability percentages, and utility rates. As this is a database from multiple sources, incomplete data entries are noted.

This paper deals with a generic methodology to evaluate the magnetic parameters of contactless power transfer systems. Neumann's integral has been used to create a matrix method that can model the magnetics of single coils (circle, square, rectangle). The principle of superposition has been utilised to extend the theory to multi-coil geometries such as double circular, double rectangle and double rectangle quadrature assuming linearity of magnetics. Numerical and experimental validation has been performed to validate the analytical models developed. A rigorous application of the analysis has been carried out to study misalignment and hence the efficacy of various geometries to misalignment tolerance. Comparison of single-coil and multi-coil shapes considering coupling variation with misalignment, power transferred and maximum efficiency is carried out.

We synthesized a small series of five 3-[4-arylmethoxy)phenyl]propanoic acids using an easy and short step synthetic route. All compounds were tested in vitro against a set of four protein targets identified as key elements in diabetes: GPR40, aldose reductase (AKR1B1), PPARγ and GLUT-4. Compound 1 displayed an EC₅₀ value of 0.075 μM against GPR40 and was an AKR1B1 inhibitor, showing IC₅₀ = 7.4 μM. Compounds 2 and 3 behave as AKR1B1 inhibitors, GPR40 agonists and showed an increase of 2 to 4-times in the mRNA expression of PPARγ, as well as the GLUT-4 levels. Docking studies were conducted in order to explain the polypharmacological mode of action and the interaction binding mode of the most active compounds on these targets. Compounds 1-3 were tested in vivo at 100 mg/kg dose, being 2 and 3 orally actives, reducing glucose levels in a non insulin-dependent diabetes mellitus mice model. Compounds 2 and 3 showed robust in vitro and in vivo efficacy, and could be considered as promising multitarget antidiabetic drug candidates. This is the first report of a single molecule with these four polypharmacological target action.

In commercial terms, Virgin Olive Oil (VOO) is considered an exceptional food of excellent sensory and nutritional quality, for its taste and genuine odour and, as well as for its bioactive compounds, of a great interest for the health. This quality can be affected by oxidative degradation, chemical as well as enzymatic (activity of oxidative endogenous enzymes from polyphenol oxidase and peroxidase olive fruit type), of essential components during extraction and conservation of VOO. In the bibliography, the reduction of oxygen during the malaxation process and the storage of the oil has been studied in different ways. However, research about the reduction of oxygen in the crushing of olive fruit, malaxation of the paste and/or both at the same time in “real extraction condition” is scarce. The reduction of oxygen has been compared to control conditions (concentration of atmospheric oxygen of 21%). Batches of 200 kg of olive fruit, Picual cultivar, were used and the following treatments were applied: Control (21% O2 Mill - 21% O2 Mixer), “IM-NM”: Inerted milling -Normal malaxation (6.5% O2 Mill-21% O2 Mixer), “NM-IM”: Normal milling-Inerted malaxation (21% O2 Mill-4 % O2 Mixer) and “IM-IM”: Inerted milling-Inerted malaxation (5.5% O2 Mill-10% O2 Mixer). The parameters of commercial quality covered by Regulation: free acidity, peroxide value and absorbency in ultra-violet (k 232 and k270) did not suffer any change in relationship to the control, the oils belong to the comercial category of “Extra virgin olive oil”. The phenolic compounds are involved in the distinctive bitter and purgent taste and, their healthy properties and their oxidative stability, increased with the downsizing amounts of oxygen regarding control and the IM-NM, NM-IM and IM-IM treatments with an average of 4, 10 and 20 %, respectively. By contrast, total volatile compounds decrease between a 10-20 % in all oxygen reduction treatments. The volatile compounds arising from lipoxygenase pathway, which are responsable for the green and fruity notes of VOO, also decreased their concentration with the treatments, between 15-20%. The results show how the reduction of oxygen in the milling and malaxation stages of olive fruit can modulate the content of phenols, volatile compounds, carotenoids and chlorophyll pigments of the VOO avoiding the degradation of compound with sensorial and nutritional interest.

Hospital bed shortage is a worldwide concern. Beds unavailability has caused elective surgery cancellations, at our hospital peaking in spring 2016 at over 50%. This is often due to difficult patient step-down from intensive care (ICU) and high-dependency units (HDU). In our general/digestive surgery service admitting approximately 1000 patients yearly, ward rounds were run on a consultant firm basis. We report a quality improvement (ISRCTN13976096) introducing in our service a structured daily multi-disciplinary board round framework (SAFER Surgery R2G) adapted from the “SAFER patient flow bundle” and the "Red to Green days” approaches to enhance flow, comparing the previous year to 2017, when our framework was applied for 12 months.We used a Plan-Do-Study-Act (PDSA) methodology. Our intervention consisted in 1) systematic communication of the key care plan after the afternoon ward rounds to the nurse in charge; 2) 30’ 10AM Monday-to-Friday multidisciplinary board rounds, attended daily by the senior-team and weekly by hospital and site managers, revising the key care plan aiming at safe, early discharges, assessing the appropriateness of each inpatient day and tackling any cause of delay. We measured patient flow by average length of stay (LOS), ICU/HDU step-downs and operation cancellations count, monitoring safety through early 30-day readmissions. Compliance was assessed by board round attendance and staff satisfaction rate surveys.After 12 months (PDSA 2, N=1032), LOS significantly decreased from 7.2(±8.9) to 6.3(±7.4) days (p=0.003); ICU/HDU bed step-down flow increased by 9.3% from 345 to 375 (p=0.197), surgery cancellations dropped from 38 to 15 (p=0.100). 30-day re-admissions increased from 0.9% (N=9) to 1.3% (N=14)(p=0.390). Average cross-specialty attendance was 80%. Satisfaction rates were >75%, regarding enhanced teamwork and faster decisions.The SAFER Surgery R2G framework has shown an increase in patient flow in the context of an enhanced multidisciplinary approach, requiring senior staff commitment to remain sustainable.

Background: The most frequent non-pigmented malignancy of the ocular surface is ocular surface squamous neoplasia (OSSN), which has a frequency of 0.03 to 1.9 per 100,000 people per year. It can be diagnosed histologically as anything from mild dysplasia to aggressive squamous cell carcinoma that affects both the conjunctiva and the cornea. The purpose of this study is to determine the distribution of ocular surface squamous neoplasia at a teaching hospital in South Western Uganda.Methods: In this retrospective study, we reviewed all records of patients with ocular surface squamous neoplasia from the Mbarara University of Science and Technology (MUST)/ Mbarara Regional Referral Hospital (MRRH) pathology laboratory in South Western Uganda, from January 2015- October 2021.Results: Of the 1,133 cases of ocular neoplasia seen during this time, OSSN composed of 26.7% (n=303). OSSN occurred mainly in females (59.1%). The most common OSSN was invasive squamous cell carcinoma (60.4%). The age range was 15-106 years while the mean was 39.99 years. The commonest affected age group was 30-44years (41.3%).Conclusion: The burden of OSSN is high. It primarily affects young adults and is frequently found in women. Squamous cell carcinoma makes up the majority of the disease.

Microbial electrochemical technologies (MET) rely on the presence of the metabolic activity of electroactive bacteria for the use of solid-state electrodes for oxidizing different kind of compound, that could lead to the synthesis of chemicals, bioremediation of polluted matrices, the treatment of contaminants of interest, as well as the recovery of energy. Keeping in mind those possibilities, since the beginning of the present century, there has been a growing interest in the use of electrochemical technologies for wastewater treatment, and if possible with simultaneous power generation. In the last years, there has been a growing interest to explore the possibility of merging MET with constructed wetlands, to offer a new option of intensified wetland system that could keep a high performance with a lower footprint. Based on that interest, this paper explains the general principles of MET, and the different known extracellular electron transfer mechanisms ruling the interaction between electroactive bacteria and potential solid-state electron acceptors. Also, the adoption of those principles for the development of MET set-ups for simultaneous wastewater treatment and power generation, and the challenges that the technology face. Ultimately, the most recent developments in set-ups that merges MET with constructed wetlands are presented and discussed.

Snakebite envenomation, cognized as a neglected tropical disease, is a dread public health concern with the most susceptible groups being herdsmen, the elderly, active farmers, hunters, fishers, firewood collectors, 10 to 14-year old working children and individuals with limited access to education and health care. Snakebites are fragmentarily documented in Uganda primarily because most occur in rural settings where traditional therapists end up being the first line defence for treatment. Ethnobotanical surveys in Uganda have unveiled that some plants are used to antagonize the activity of various snake venoms. This review was sought to compile the sporadic information on the vegetal species reported as antivenins in Uganda. Electronic data indicate that no study entirely reported on antivenin plants in Uganda. A total of 77 plant species belonging to 65 genera, distributed among 42 botanical families claimed as antiophidic in Uganda are used for treatment of snakebites. Majority of these species belong to family Fabaceae (30.9%), Euphorbiaceae (14.3%), Asteraceae (11.9%), Amaryllidaceae (9.5%) and Solanaceae (9.5%). The antiophidic species listed are shrubs (40.5%), trees (32.9%) and herbs (17.7%), usually found in the wild and uncultivated. Antivenin extracts are primarily prepared from roots and leaves, through decoctions, infusions, powders and juices and administered orally or topically. The most frequently encountered therapeutically important species are Allium cepa L., Carica papaya L., Securidaca longipedunculata Fres., Harrisonia abyssinica Oliv. and Nicotiana tabacum L. Baseline epidemiological data on snake envenomation and antivenin plants in Uganda remain incomplete due to inadequate research and diverse ethnic groups in the country. There is a dire need to isolate and characterize the bioactive compounds in the claimed plants to enable their adroit utilization in handling the plague of snake envenomation. More baseline data should be collected on snake ecology and human behaviour as well as antivenin plants in Uganda. Indigenous knowledge on the use of plant preparations in traditional medicine in Uganda is humongous, but if this is not quickly researched and appropriately documented, indications as to the usefulness of this vegetal treasure house will be lost in the not so distant future.

Tamanu oil has traditionally been used to treat various skin problems. The oil has wound-healing and skin-regenerating capabilities, and encourages the growth of new skin cells, all of which are helpful for fading scars and hyperpigmentation, as well as promoting an all-around glow. The strong nutty odor and high viscosity are the major disadvantages associated with their application. The aim of this study was to create bigels using tamanu oil for its anti-scarring properties. Bigels were prepared with Tamanu oil ranging from 5 to 20% along with micronized xanthan gum and evaluated for their pH, viscosity, and spreadability. In silico studies were performed to analyze the binding affinity of the protein with the drug, and the anti-scarring activity was established using a full-thickness excision wound model. In silico studies have reported that the components Calanolide A, Inophyllum C, and 4-Norlanosta-17(20),24-diene-11,16-diol-21-oic acid, and 3-oxo-16,21-lactone had docking scores of -9.8, -11.3, and -11.1, respectively with the cytokine TGF- β1 receptor. An acute dermal irritation study in rabbits showed no irritation, erythema, eschar, or edema. In vivo excisional wound healing studies performed on wistar rats and subsequent histopathological studies showed that bigels had better healing properties when compared to the commercial formulation (Murivenna oil). This study substantiates the wound healing and scar reduction potential of Tamanu oil bigels.

Developing nanomaterials with the capacity to restrict the growth of bacteria and fungus is of current interest. In this study, nanocomposites of poly(2-hydroxyethyl methacrylate) (PHEMA) and carbon nanotubes (CNTs) functionalized with primary amine, hydroxyl, and carboxyl groups were prepared, and characterized. An analysis by Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy showed that PHEMA chains were grafted to the functionalized CNTs. The morphology of the prepared nanocomposites studied by field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM) shows significant changes with respect to the observed for pure PHEMA. The thermal behavior of the nanocomposites studied by differential scanning calorimetry (DSC) revels that the functionalized CNTs affects strongly the mobility of the PHEMA chains. Tests carried out by thermogravimetric analysis (TGA) were used to calculate the degree of grafting of the PHEMA chains. The ability of prepared nanocomposites to inhibit the growth of the fungus Candida albicans, and the bacteria Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli was evaluated. A moderated antifungal and antibacterial capacity of the prepared nanocomposites was determined.

Pseudomonas aeruginosa is an opportunistic Gram-negative bacterium that remains a prevalent clinical and environmental challenge. Quorum sensing (QS) molecules are effective biomarkers in pinpointing the presence of P. aeruginosa. This study aimed to develop a convenient-to-use whole-cell biosensor using P. aeruginosa reporters individually encapsulated within alginate-poly-L-lysine (alginate-PLL) microbeads to specifically detect the presence of bacterial autoinducers. The PLL-reinforced microbeads were prepared using a two-step method involving ionic crosslinking and subsequent coating with thin layers of PLL. The alginate-PLL beads showed good stability in the presence of a known cation scavenger (sodium citrate), which typically limits the widespread applications of calcium alginate. In media containing synthetic autoinducers, such as N-(3-oxo dodecanoyl) homoserine lactone (3-oxo-C12-HSL) and N-butanoyl-L-homoserine lactone (C4-HSL) or cell-free supernatants of planktonic or flow cell biofilm effluent of wild P. aeruginosa (PAO1), the encapsulated bacteria enabled a dose-dependent detection of the presence of these QS molecules. The prepared bioreporter beads remained stable during prolonged storage at 4 and -80 °C and were ready for on-the-spot sensing without the need for recovery. This whole-cell biosensor demonstrates the practicality of the encapsulated bioreporter for bacterial detection based on specific QS molecules.

The quest for sustainable health, environmental protection and conservation of beneficial organisms makes the use of biopesticides a desirable option. This research aimed to identify botanicals used in the management of farm and household pest in Plateau State, Nigeria. A cross sectional study was carried out using semi-structured questionnaires and on the spot face-to-face interviews. The main issues captured include the pest, plants used to managed the pest, parts used, cultivation status, availability, effect on pest, formulation methods and modes of application. The quantitative data were analyzed using the Frequency of Citation (FC), Relative Frequency of Citation RFC (%) and Use Value (UV). A total of 45 plant species belonging to 42 genera, 20 orders and 30 families were found to be useful in the management of 15 different pests. The FC, RFC(%) and UV values identified the most popularly used plants as: Hyptis suaveolens, Vernonia amygdalina, Azadirachta indica, Canarium schweinfurthii and Euphorbia unispina and Erythrophloem africanum. Plants that showed broad activity include Azadirachta indica (7 uses), Erythrophloem africanum, Khaya senegalensis and Vernonia amygdalina. The perception of the respondents indicated that most of the biopesticides are available, affordable, effective, eco-friendly and safe. This survey provides a pathway for formulation of biopesticides.

Microplastics (MPs) and nanoplastics (NPs) are distributed and transferred among the four major environmental compartments (air, water, soil, and biota) and have been already found in humans, making crucial to develop remediation technologies to tackle this kind pollution. Photocatalysis can be used to eliminate MPs present in contaminated wastewater effluents before their discharge into waterbodies. In this work, several green TiO2-based semiconductors were prepared using the extrapallial fluid (EPF) of Mytilus edulis sea water mussels as doping precursor. The semiconductors were then used as films or powders to photocatalytically degrade polystyrene (PS) NPs and MPs and polyethylene (PE) MPs. It was found that the obtention of green TiO2-based semiconductors with good characteristics for photocatalytic purposes (anatase crystalline phase, presence of porosity, activity in visible light and high surface area) seems not enough to achieve high degradation efficiency. The operational conditions of the reaction system should be also taken into account. For instance, the convenience of using semiconductors in the form of films can be overcome by their limited exposed surface area or the null adsorption of the semiconductor in the MPs particles. Additionally, crystallinity of the semiconductor can be a more determinant factor to take into account when performing photocatalysis of MPs.

: Background: Overweight and obesity are major risk factors for many chronic diseases, and weight-loss interventions often include systematic exercising and nutritional supplements. The purpose of this study was to determine the independent/synergistic effects of Spirulina maxima supplementation (6-week, 4.5 g/day) and a systematic physical exercise program (6 weeks/ 2 times) on body composition and cardiorespiratory fitness of overweight and obese subjects. Methods: 27 overweight and 25 obese sedentary male subjects were assigned to four interventions through a randomized double-blind, crossover controlled trial: Physical exercise program with (SE) or without (Ex) Spirulina maxima or no-exercise program with (Sm) and without (C) Spirulina maxima. Body composition and cardiorespiratory fitness parameters were taken during a maximal intensity test. Results: As compared to C group, SE, Sm and Ex groups reduced (p < 0.05) their body fat percentage while improving their maximal oxygen uptake (VO₂max; r = −0.40), being obese subjects more benefited. Weight loss, time to reach fatigue and onset of blood lactate accumulation were improved in both Spirulina maxima supplemented groups, regardless the subjects’ body composition. Conclusions: Spirulina maxima supplementation synergistically improves the effects of systematic exercise in body composition and cardiorespiratory fitness parameters in overweight but mostly in obese adults.

Numerous proteomic and transcriptomic studies have been carried out to better understand the current multi-variant SARS-CoV-2 virus mechanisms of action and effects. However, they are mostly centered on mRNAs and proteins. The effect of the virus on human post-transcriptional regulatory agents such as microRNAs (miRNAs) involved in the regulation of 60% of human gene activity remains poorly explored. Similar to what we have previously done with other viruses such as Ebola and HIV, in this study we investigated the miRNA profile of lung epithelial cells following infection with SARS-CoV-2. At the 24 and 72 hours post-infection, SARS-CoV-2 did not drastically alter the miRNome. About 90% of the miRNAs remained non-differentially expressed. The results revealed that miR-1246, miR-1290 and miR-4728-5p were the most upregulated over time. miR-196b-5p and miR-196a-5p were the most downregulated at 24 h while at 72 h, miR-3924, miR-30e-5p and miR-145-3p showed the highest level of downregulation. In the top significantly enriched KEGG pathways of genes targeted by differentially expressed miRNAs we found, among others, MAPK, RAS, P13K-Akt and renin secretion signaling pathways. By RT-qPCR, we also showed that SARS-CoV-2 may regulate several predicted host mRNA targets involved in the entry of the virus into host cells (ACE2, TMPRSS2, ADAM17 and FURIN), in renin–angiotensin system (RAS) (Renin, Angiotensinogen, ACE), innate immune response (IL-6, IFN1β, CXCL10, SOCS4) and fundamental cellular processes (AKT, NOTCH, WNT). Finally, we demonstrated by dual luciferase assay a direct interaction between miR-1246 and ACE-2 mRNA. This study highlights the modulatory role of miRNAs in the pathogenesis of SARS-CoV-2.

Power semiconductor devices are essential from the operation point of view, size, efficiency and cost, these components are used in a myriad of applications, providing features that make them an important part of the system in which they are operating. This document analyzes and compares the basic structure, properties, design aspects, as well as temperature performance, stability and switching losses, present in devices on silicon (Si), silicon carbide (SiC) and new generation devices fabricated in gallium nitride (GaN) applied in renewable energy systems. The main objective is determinate the viability of the new generation components, which present a superior performance in view of an increase in efficiency, conductivity, decreases in switching losses, lower resistances and parasitic capacitances as well as higher operating frequency range. Therefore demonstrating the GaN components are a strong and viable candidate to solve some of the problems present in renewable energy systems.

Analytical instruments used for scientific research and education are often expensive. This limitation poses a challenge for schools and educators in low-income countries to provide practical science training to students. To address this problem, the improvisation of analytical instruments and instructional materials has emerged as a viable solution. By incorporating practical experiments into science education, students have the opportunity to engage directly with scientific instruments, conduct investigations, and collect data. This hands-on approach fosters a deeper understanding of scientific principles, enhances critical thinking skills, and cultivates scientific mindsets among students. Herein, we review and discuss, step-by-step, the approach of using a smartphone for quantitative analysis, referred to as smartphone digital image colorimetry (SDIC). SDIC, with its practicality and accessibility, utilizes smartphone digital cameras for image acquisition and the freely available image processing programs, such as ImageJ and smartphone Apps, for image quantification. Using SDIC can enable students in low-income countries to develop essential scientific skills, including critical thinking, data interpretation, and an evidence-based approach to scientific research. By leveraging the ubiquity and affordability of smartphone technology, SDIC offers an accessible and cost-effective approach to practical science education, bridging the gap between theory and practice in resource-constrained settings.

BACKGROUND: Social determinants of health are conditions in the environments that significantly influence the health of individuals and communities. Various factors like income, socio-economic status, stress, customs, culture, healthcare services largely affect the health status of individuals and communities. OBJECTIVE: This study was carried out to identify the factors responsible for the social determinants of health among residents of Buari Ishola Isibo in Ede North Local Government Area, Osun State, Nigeria. METHODOLOGY: A descriptive cross – sectional study was utilized, and multi-stage random sampling method was employed in selecting 60 households of Buari Ishola Isibo in Ede North Local Government Area, Osun State, Nigeria. Questionnaire was used for data collection and data was analyzed using SPSS version 21. RESULTS: The respondents’ ages were between 15 – 60 years and above. 29 (48.3%) were between 31 – 60 years old, 31 (52.0%) were males, 40 (66.7%) were married, 57 (95.0%) were Islam and Yoruba. 29 (48.3%) earned 10,000 – 30,000 monthly, 23 (38.3%) had secondary school education, 39 (65.0%) were traders and 27 (45.0%) have 6 – 10 households respectively. Of the 60 respondents, 34 (56.7%) visit government health facility when they are sick, 21 (35.0%) make use of hand dug well in their compound as the source of their water supply, 27 (45.0%) uses flush water closet toilet as the means of disposing off their excreta, 36 (60.0%) lives in concrete with zinc roof house, 27 (45.0%) have between 6 – 10 rooms in their house, 55 (91.7%) sleep in a room and 21 (35.0%) make use of charcoal as source of fuel for their cooking. CONCLUSION: Poverty or lower income affects the health of individuals through a person’s health throughout their life span. Issues that affect social determinants of health of individuals and community in a negative way should be accosted with all seriousness.

CO2, CH4 and CO are the most critical atmospheric gases in terms of their impact on the radiative system, air quality and health. This work provides information on the direction of source areas and potential sources of emissions and shows many aspects of these gases by a statistical analysis using bivariate polar diagrams and local weather conditions (e.g., temperature, wind speed and wind direction) recorded at the Lamto station (LTO, 6°31N and 5°02W) in Côte d’Ivoire over the 2014-2018 period. The results show that the main regions contributing to the high concentrations of CH4 (> 1925 ppb) and CO2 (> 420 ppm) in the GSS, GSP, PSS and PSP seasons are the North and Northwest sectors of Lamto. In these directions, CH4 and CO2 concentrations are associated with wind speeds less than 6 m.s-1, due to the influences of local sources as emissions resulting from the degradation of organic matter submerged during the impoundment of the Taabo dam, and/nor human activities linked to the practice of intensive agriculture. In addition, the high concentrations of CO (> 350 ppb) are observed in GSS in the North, North-West, North-East and East sectors for wind speeds less than or equal to 9 m.s-1, due to the influences of both local and distant sources. The correlation coefficients between CH4 and CO, and between CH4 and CO2 are positive and significant in all sectors. However, those calculated between CO2 and CO have showed both low and high values in all seasons.

Objective: We tested a model of individual health literacy information sharing with family members, personal preventive behaviours and family well-being during the Coronavirus Disease 2019 (COVID-19) pandemic in Hong Kong. Methods: We analysed data of 1501 randomly selected Chinese adults from a cross-sectional survey in Hong Kong from 9 to 23 April, 2020. Individual health literacy about COVID-19 with the items extracted from the questionnaire in World Health Organization Risk Communication and Community Engagement (RCCE) Action Plan Guidance for COVID-19 preparedness and response, COVID-19 information sharing with family members, preventive behaviours against COVID-19 and family well-being were measured. Structural equation modelling analysis tested the proposed model. Findings: COVID-19 information sharing with family members partially mediated the association between individual health literacy and personal preventive behaviours. The direct effect of 0.24 was shown, and the indirect effect through COVID-19 information sharing with family members was small at 0.03 (Z = 3.66, p < 0.001). Family well-being was associated with personal preventive behaviours against COVID-19. The model was adjusted for sex, age, and socioeconomic status factors and had good fit with RMSEA = 0.04, CFI = 0.98, TLI = 0.96, and SRMR = 0.02. Conclusion: COVID-19 information sharing with family members was a partial mediator between individual health literacy and personal preventive behaviours against COVID-19. Strategies for enhancing health literacy and preventive measures against COVID-19 are needed to promote family well-being in the pandemic.

: Fluoride toxicity has become a global public health concern, and its significant source of exposure is drinking water. This study aimed to determine groundwater fluoride level and assess its related human health risks. Its level was measured from groundwater samples using an ion-selective electrode. The total hazard index was assessed based on the chronic daily oral intake and dermal absorbed dose of groundwater fluoride. Analyses were conducted using ArcGIS and SPSS. This study reported groundwater fluoride ranged from 0.3 mg/L to 38 mg/L, with a mean annual level of 15 mg/L. Groundwater fluoride level above 5 mg/L was reported in 60 % of the water samples. Total hazard index values among sampled locations varied from 0.18 to 22.56. Half (51.5 %) of infants, 85.5 % of children, 82.5 % of adolescents, and 67.5 % of adults had a risk of developing a non-carcinogenic health effect. This study demonstrated that the fluoride level of the groundwater sources was high, and the water was not suitable for drinking, a result that is of special importance for children and adults since they are a hypersensitive subgroup of the population.

Increased volume of untreated and inadequately treated municipal wastewater undermines the circular economy potential of wastewater resources, particularly in low-income region. This present study focused on and evaluated the performance of native microalgae-activated sludge (MAS) growth for tertiary treatment of anaerobically digested wastewater from an upflow anaerobic sludge blanket (UASB) in an outdoor lab-scale photobioreactors (2 L). Seven conditions with distinct inoculum concentrations were operated in batch mode in triplicate for 5-days hydraulic retention time (HRT) at 11.5:12.5 Photo-hours. MAS inoculum concentration influenced treatment outcome. The best performance was observed in MAS concentration 0.10/0.20 g L-1, with cell density count (2.03 x 107 cells mL-1), biomass productivity 0.125 g TSS L-1 d-1 and total phosphorus uptake (85.07%), total nitrogen uptake (66.14%). Logarithmic removal (Log-Re) of bacterial pathogens (water quality indicators) showed Log-Re ((3.4 for total coliforms (1.37E+02 CFU 100 mL-1) and 4.7 for Escherichia coli (0.00E+00 CFU 100 mL-1)). Results revealed optimum remediation performance and nutrients’ recovery potential with appropriate inoculum concentration, in admiration to advancing the science of circular economy.

Elbow dislocation and instability present significant clinical challenges, necessitating a thorough understanding of the underlying bio-mechanical mechanisms. In this study, a quasi-static three-dimensional finite element model of the human elbow joint is developed to investigate stress distribution and stages of dislocation in the human elbow under various loading conditions. The model simulates the elbow joint in different degrees of flexion (30°, 45°, 60°, and 90°) and forearm positions (pronation and supination), providing detailed insights into the progression of dislocation. Significant findings include the identification of high stress concentrations on the humerus at 90° flexion and on the radial and coronoid processes at 30°, 45°, and 60° flexion. Three reproducible stages of dislocation were observed, particularly in flexed positions with forearm pronation or supination. These stages align with experimental observations and highlight the initial occurrence of bony failures, such as radial head and ulnar coronoid fractures, preceding soft tissue tears. Clinically, the study underscores that early-stage low-impact posterior elbow dislocations retain enough stability to be managed with closed reduction and early mobilization. However, as dislocations progress, significant damage to the medial and lateral collateral ligaments is expected, necessitating more invasive treatments. This research provides valuable bio-mechanical insights into elbow dislocation, aiding in the development of improved treatment strategies and enhancing patient outcomes through precise and timely clinical interventions. The validated FEM serves as a powerful tool for pre-surgical planning offering a comprehensive understanding of elbow joint mechanics.

Systemic sclerosis (SSc) is a multisystem connective tissue disease characterized by pathological processes involving autoimmunity, vasculopathy, and resultant extensive skin and organ fibrosis. Recent studies have demonstrated activation and aberrant wound healing responses in the epithelial layer of the skin in this disease, implicating the epithelial keratinocytes as a source of pro-fibrotic and inflammatory mediators. In this paper we investigated the role of Immunoglobulin G (IgG) autoantibodies directed against epithelial cells, as potential initiators and propagators of pathological keratocyte activation and the ensuing SSc fibrotic cascade. A keratinocyte cell-based ELISA is used to evaluation binding of SSc IgG. SSc skin biopsies were stained by immunofluorescence for the presence of IgG in the keratinocyte layer. Moreover, IgG purified from SSc sera is evaluated for the potential to activate keratinocytes in tissue culture and to induce signaling in TLR2 &amp; 3 reporter cell lines. We demonstrate enhanced binding of SSc IgG to keratinocytes, and activation of these cells leading to release of IL-1α, representing a potential initiating pathway in this disease.

Ribosomal proteins (RPs) mediate protein synthesis and stability of the ribosomal complex. RPs and rRNA form ribosomal subunits and ri-bosomes, the cellular machinery for protein synthesis, a fundamental biological process related to cell growth and proliferation. The differ-ences between paralogs within the same RP family have led them to ac-quire extraribosomal functions involved in plants' growth, develop-ment, and biotic and abiotic stresses. From transcriptomic analysis, it has been revealed that ribosomal proteins have a crucial role during MTs development. The RPLs; RPL11, RPL29 and RPL40 interact with PEBP family members (Phosphatidylethanolamine-binding proteins), poten-tial activators in the MTs development. In potatoes, genome editing is a promising technology to introduce crop breeding traits. Recently, the edition of the genome through the CRISPR/Cas9 system has made it the most efficient and powerful genetic modification method. Based on this, the gene modulation by overexpression and silencing in RPL11, RPL29 and RPL40 will guide us to understand the effect on the microtuberiza-tion process and produce improved potato plants with the capability of growing under adverse environments (biotic and abiotic stresses). By understanding the molecular biology mechanisms that RPs govern, we can improve crops under today's changing climatic conditions.

Introduction: The presence of multiple comorbidities increases the risk of all-cause mortality, but the effects of the comorbidity sequence before the baseline date on mortality remained unexplored. This study investigated the relationship between coronary heart disease (CHD), atrial fibrillation (AF) and heart failure (HF) sequence on all-cause mortality risk in type 2 diabetes mellitus. Methods: This study included patients with type 2 diabetes mellitus prescribed antidiabetic/cardiovascular medications in public hospitals of Hong Kong between January 1st, 2009 and December 31st, 2009 with follow-up until death or December 31st, 2019. Cox regression was used to identify comorbidity sequences predicting all-cause mortality in patients with different medication subgroups. Results: A total of 249291 patients (age: 66.0±12.4 years, 47.4% male) were included. At baseline, 7564, 10900 and 25589 patients had AF, HF and CHD, respectively. Over follow-up (3524±1218 days), 85870 patients died (mortality rate: 35.7 per 1000 person-years). Sulphonylurea users with CHD developed later, but insulin users with CHD developing earlier, in the disease course had lower mortality risks. Amongst insulin users with two of the three comorbidities, CHD with preceding AF (hazard ratio [HR]: 3.06, 95% CI: [2.60-3.61], p<0.001) or HF (HR: 3.84 [3.47- 4.24], p<0.001) had a higher mortality. In users of lipid-lowering agents with all three comorbidities, those with preceding AF had higher risk of mortality (AF-CHD-HF: HR: 3.22, [2.24-4.61], p<0.001; AF-HF-CHD: HR: 3.71, [2.66-5.16], p<0.001). Conclusion: The sequence of comorbidity development affects the risk of all-cause mortality to varying degrees in diabetic patients on different antidiabetic/cardiovascular medications.

To reduce environmental impacts from sodium silicate synthesis it was suggested the use of sugarcane bagasse ash (SCBA) as a source of silicon dioxide and sodium carbonate using the ceramic method. Although the production of sodium silicate is carried out on a large scale, it should be noted that its process requires temperatures above 1000 °C or the use of highly corrosive agents such as sodium hydroxide and chlorine gas used to neutralize the remaining sodium hydroxide. In the present work, the synthesis temperatures were reduced to 800 °C with a reaction time of 3 hours by pressing equimolar mixtures of previously purified SCBA and sodium carbonate, then heat treatment was carried out under the indicated conditions. The resulting materials were analyzed by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). Among the crystalline phases, calcium disodium silicate was identified, in addition to sodium silicate, so it was inferred that the other components of the ash can interfere with the synthesis of silicate. Therefore, to obtain the highest composition of sodium silicate, a leaching treatment of the SCBA is required.

There are important challenges for modeling large electrical distribution circuits, even more with the presence of distributed renewable generation. Constructing simulations for assessing the effect of the penetration of distributed generation on electrical distribution networks has become of great importance for Distribution Network Operators (DNOs). This paper proposes a simulation strategy based on open-source platforms and the integration of scripting tools for the rapid modeling of large-scale electrical distribution circuits with distributed renewable generation. The implementation is based on the adaptation of a tool called QGIS2OpenDSS, which creates OpenDSS distribution network models directly from an open-source geographic information system, QGIS. The plugin’s capabilities are demonstrated using a real distribution feeder with more than 60% penetration of renewable generation based on photovoltaic systems. These simulations are carried out using real data from a circuit provided by a DNO in the Dominican Republic, which is used to demonstrate how this approach provides a more accessible and flexible way to simulate and assess the effect of Distributed Energy Resources (DERs) in Medium Voltage (MV) and Low Voltage (LV) networks, enabling utilities to evaluate system performance and identify potential issues.

Multiple sclerosis (MS) is a chronic autoimmune inflammatory disease that affects the nervous system. Peripheral blood leukocyte telomere length (LTL) and mitochondrial DNA copy number (mtDNA-CN) are potential biomarkers of disability and neurological damage. The present work evaluated LTL and mtDNA-CN in 75 relapsing-remittent MS (RRMS) patients 50 of whom had an Expanded Disability Status Scale (EDSS) 0 to 3 (mild-moderate disability), and 25 had an EDSS of 3.5 to 7 (severe disability). Absolute LTL and absolute mtDNA-CN were measured via real-time polymerase chain reaction (qPCR). The LTL and mtDNA-CN were significantly lower in RRMS severe disability than in RRMS mild-moderate disability (3.924 ± 0.124 vs 2.854 ± 0.092, p<00001; 75.14 ± 1.77 vs 68.06 ± 1.608, p<0.00001, respectively). The LTL and mtDNA-CN showed a linear correlation in RRMS with mild-moderate disability (r=0.2986, p=0.0351). In addition, in a binary logistic regression model the LTL can predict severe disability (AUC=0.697, p=0.0031, cutoff ≤ 3.0875 Kb, sensitivity= 73.1%, specificity=62.5%), the prediction is improved by including age to the model (AUC=0.765, <0.0001, sensitivity=78.26%, specificity=81.25%). Aging is closely linked to the development of disability in RRMS and can be evaluated through LTL and mtDNA-CN absolute quantification.

Surface–subsurface soil-rock modeling is crucial for infrastructure design and groundwater yield optimization, especially in the complex crystalline basement terrains of Penang Island, Malaysia. This study conducted large-scale characterization of soil-rock profiles using ERT, SRT, rock quality designation, and soil penetration test (SPT N-values) data, optimized through regression modeling. The approach effectively identified soil-rock structures and their suitability to prevent structural failures and enhance groundwater productivity. Correlations between borehole lithologic logs and velocity–resistivity models revealed distinct soil compositions across the study area. The results highlighted thick, saturated, and loose silty to sandy bodies in the eastern to northern sections, contrasting with sandy compositions and penetrative fractures in the southern part. The study also found good correlations between rock mass quality and N-values for different soil types. Depths of intra-bedrock weathered/fractured units varied between 12 and >35 m. This has significant implications for determining optimal foundation depths in the study area. Groundwater productivity was associated with intra-bedrock planes of weakness at depths exceeding 40 m. Overall, this study developed empirical relations between geophysical and geotechnical parameters for wet tropical granitic terrains, filling critical gaps in understanding subsurface characteristics.

(1) Background: Colon polyps are common protrusions in the colon’s lumen with potential risks of developing colorectal cancer. Early detection and intervention of these polyps are vital for reducing colorectal cancer incidence and mortality rates. This research aims to evaluate and compare the performance of three machine-learning image classification models’ performance in detecting and classifying colon polyps. (2) Methods: The performance of three machine learning image classification models, Google Teachable Machine (GTM), Roboflow3 (RF3), and You Only Look Once version 8 (YOLOV8), in the detection and classification of colon polyps were evaluated. The study used a dataset of colonoscopy images of normal colon, polyps, and resected polyps. The study assessed the models’ ability to correctly classify the images into their respective classes using precision, recall, and F1 score generated from confusion matrix analysis and performance graphs. (3) Results: All three models successfully distinguished between normal colon, polyps, and resected polyps in colonoscopy images. GTM achieved the highest accuracies: 0.99, with consistent precision, recall, and F1 scores of 1.00 for the `normal’ class, 0.97 - 1.00 for `polyps,’ and 0.97 - 1.00 for `resected polyps.’ While GTM exclusively classified images into these three categories, both YOLOV8 and RF3 extended their capabilities to detect normal colonic tissue, polyps, and resected polyps, with YOLOV8 and RF3 achieving overall accuracies of 0.84 and 0.87, respectively. (4) Conclusions: Machine learning, particularly models like GTM, shows promising results in ensuring comprehensive detection of polyps during colonoscopies.

The COVID-19 pandemic continues to ravage the world, with the United States being highly affected. A vaccine provides the best hope for a permanent solution to controlling the pandemic. However, to be effective, a vaccine must be accepted and used by a large majority of the population. Structural equation modelling was used to analyze the relationships of several factors with attitudes toward potential COVID-19 vaccination. The survey was administered to 316 respondents across the United States by a survey corporation. Prior vaccine usage and attitudes predicted attitudes towards COVID-19 vaccination. Assessment of the severity of COVID-19 for the United States was also predictive. Approximately 68% of all respondents were supportive of being vaccinated for COVID-19, but side effects, efficacy, and length of testing remained concerns. Longer testing, increased efficacy and development in the United States were significantly associated with increased vaccine acceptance. Messages promoting COVID-19 vaccination should seek to alleviate the concerns of those who are already vaccine-hesitant. Messaging directed at the benefits of vaccination for the United States as a country would address the second predictive factor. Enough time should be taken to allay concerns about both short and long-term side effects before a vaccine is released.

Topology optimization has become a very popular design tool when an optimum design with a concrete objective and subjected to several restrictions is searched. However, the resultant shape of the optimization process isn’t usually easy to manufacture with a typical manufacturing method as machining, being necessary an interpretation and validation of the result; besides, some parameters can be chosen, and the final shape is directly dependent on them. In this paper, a sensitivity analysis of the main parameters involved in 3D topology optimization, the penalization and the filter radius, is carried out for the concrete case of the density-based method, analyzing how manufacturable the results are for 3 axis machining. Also, a new filter and method is proposed for obtaining highly manufacturable and low interpretable parts. The main aim of the study is to help designers to choose the more appropriate parameters and showing what they must have into account for obtaining the desired optimized shapes. Note that the density-based topology optimization method has been chosen due to its popularity in commercial packages, so the conclusions may have direct applications in designers’ work. Finally, the results of the study are verified through different cases for checking the validity of the conclusions.

CAD-CAE software companies have introduced numerous tools aimed at facilitating topology optimization through Finite Element Simulation, thereby enhancing accessibility for designers via user-friendly interfaces. However, the imposition of intricate constraint conditions or additional restrictions during calculations may introduce instability into the resultant outcomes. In this paper, an algorithm for updating the design variables called Adaptive Variable Design is proposed to keep the final design space volume of the optimized part always under the target value while giving the main algorithm multiple chances to update the optimization parameters and search for a valid design. This algorithm aims to producing results that are more conducive to manufacturability and potentially more straightforward in interpretation. A comparison between several commercial software and the proposed algorithm, implemented in MATLAB, is carried out to prove the robustness of the latter. By simulating identical parts under similar conditions, we seek to generate comparable results and underscore the advantages stemming from the adoption and comprehension of the proposed topology optimization methodology. Our findings reveal that the integrated enhancements within MATLAB pertaining to the topology optimization process yield favourable outcomes with respect to discretization, and the manufacturability of resultant geometries. Furthermore, we assert that the methodology evaluated within MATLAB holds promise for potential integration into commercial packages, thereby enhancing the efficiency of topology optimization processes.

Nanoparticle-mediated radiation therapy (NPRT) is an emerging modality for radiosensitization of highly resistant cancers such as brain cancers. This is due to the ability of specific nanoparticles (NPs) to increase physical dose deposition and subsequent direct damage to cells and DNA within their local vicinity, through enhanced generation of reactive oxygen species, ROS. Here, we report the successful use of PEGylated (biocompatible) core-shell quantum dots (QDs) and carbon quantum dots (CQDs) to simultaneously enhance and assess ROS generation while radiosensitizing highly radioresistant brain cancer cell lines: T98G and U87 Glioblastoma cells. Relative peak fluorescence intensity ratio calculations and average intensity comparisons show highly significant (***p&lt;0.001) enhancement of ROS generation, for 5 Gy and 20 Gy irradiation, applied using a Faxitron Cell Irradiator. By quantifying post-radiotherapy cell attachment, proliferation, migration, cell survival and cell death using electric cell-substrate impedance sensing and clonogenic assays, we demonstrate potentially improved in vitro radiotherapeutic outcomes for brain cancer cells radiosensitized using PEGylated CdSe/ZnS QDs and CQDs.

There is rapidly emerging evidence from pre-clinical studies, patient samples and patient subpopulations that certain chemotherapeutics inadvertently produce prometastatic effects. Prior to this, we showed that doxorubicin and daunorubicin, stiffen cells before causing cell death, predisposing the cells to clogging and extravasation, the latter being a step in metastasis. Here, we investigate which other anti-cancer drugs might have similar prometastatic effects by altering the biophysical properties of cells. We treat myelogenous (K562) leukemic cancer cells with the drugs nocodazole and hydroxyurea, and then measure their mechanical properties using the microfluidic microcirculation mimetic (MMM) device, which mimics aspects of blood circulation and enables the measurement of cell mechanical properties via transit times through the device. We also quantify the morphological properties of cells to explore biophysical mechanisms underlying the MMM results. Results from MMM measurements show that nocodazole- and hydroxyurea-treated K562 cells exhibit significantly altered transit times. Nocodazole caused significant (p &lt; 0.01) increase in transit times, implying a stiffening of cells. This work shows the feasibility of using the MMM to explore possible biophysical mechanisms that might contribute to chemotherapy-induced metastasis. Our work also suggests cell mechanics as a therapeutic target for much needed antimetastatic strategies in general.

Novel strategies have been developed to reduce or to avoid the intravitreal injections (IVTs) of the antiangiogenic (ranibizumab; RBZ) and the anti-inflammatory (triamcinolone acetonide; TA) agents used to treat vitreoretinal diseases. One of the strategies include liposomes. In this study, it was evaluated the safety and efficacy of topical triamcinolone-loaded liposomes formulation (TALF) as an adjuvant to intravitreal RBZ therapy in treatment-naive patients with neovascular age related macular degeneration (nAMD). Subjects were randomly assigned to the RBZ-TALF or the RBZ-pro re nata (RBZ-PRN) group. Patients from the RBZ-TALF group were instructed to apply TALF for a 12-month period after a single dose of RBZ. Patients from the RBZ-PRN group received three monthly RBZ-IVTs. Retreatment with RBZ was considered in case of nAMD reactivation. Related to safety, non-ocular abnormalities were observed during TALF therapy. Owing to the efficacy, non-significant differences are identified in visual acuity or central foveal thickness when the RBZ-PRN and RBZ-TALF groups are compared. Importantly the average number of RBZ injections was significantly lower in the RBZ-TALF group (2.5 ± 1.4 vs 6.1 ± 1.3 IVTs; p=0004). Therefore, TALF used as an adjuvant to RBZ reduce the number of RBZ-IVTs retreatment with optimal visual and anatomic results.

The mystery phenomenon of fungal bioluminescence has always captivated human curiosity, although more attempts need to be made, particularly to bring the new species to the surface. In this study, we devoted considerable space to the taxonomy of these fungi while discussing their biogeography, evolution, bioluminescence mechanism, and potential ecological roles. We provide a detailed explanation of how these fungi produce light, including the role of the enzyme luciferase and luciferin. We also discussed their applications. Here, we presented an updated list of 122 bioluminescent fungi identified from five distinct evolutionary lineages viz. Armillaria, Eoscyphella, Lucentipes, Mycenoid, and Omphalotus worldwide, mainly in tropical and subtropical areas. The bioluminescent fungi descended from the last common ancestor of the mycenoid and the marasmioid clades of Agaricales, which have been maintained for at least 160 million years of evolution. We highlighted the need for further research to understand the ecological role of bioluminescent fungi. Applying bioluminescent fungi in various areas (e.g., environmental and medicinal) demonstrates their validity.

Expression of miR-21 has been found to be altered in almost all types of cancers and it has been classified as an oncogenic microRNA. In addition, expression of tumor suppressor gene RECK is associated with miR-21 overexpression in high-grade cervical lesions. In the present study we analyze the role of miR-21 in RECK gene regulation in cervical cancer cells. To identify the downstream cellular target genes of upstream miR-21, we silenced endogenous miR-21 expression using siRNAs. We analyzed the expression of miR-21 and RECK, as well as functional effects on cell proliferation and migration. We found that in cervical cancer cells there was an inverse correlation between miR-21 expression and RECK mRNA and protein expression. SiRNAs to miR-21 increased luciferase reporter activity in construct plasmids containing the RECK-3′-UTR microRNA response elements MRE21-1, MRE21-2, and MRE21-3. The role of miR-21 in cell proliferation was also analyzed and cancer cells transfected with siRNAs exhibited a markedly reduced cell proliferation and migration. Our findings indicate that miR-21 post-transcriptionally down-regulates the expression of RECK to promote cell proliferation and cell migration inhibition in cervical cancer cell survival. Therefore, miR-21 and RECK may be potential therapeutic targets in gene therapy for cervical cancer.

Milk serves as a crucial source of natural bioactive compounds essential for human nutrition and health. The gastrointestinal digestion of milk proteins releases various biologically active peptides that positively impact human health and enhance physiological performance. With the growing production of cheese, Greek yogurt, and other dairy products, the volume of unutilized acid whey is significantly increasing. Acid whey, containing almost all whey proteins and approximately one-quarter of casein, presents a valuable raw material for generating peptides with potential health benefits. These peptides exhibit properties such as antioxidant, antimicrobial, anti-inflammatory, anticarcinogenic, antihypertensive, antithrombotic, opioid, mineral-binding, and growth-stimulating activities, contributing to improved human immunity and the treatment of chronic diseases. Enzymatic hydrolysis of milk proteins has been developed as a method to produce these peptides, facilitating their use in food fortification. To incorporate whey into functional beverages, it undergoes fermentation by lactic acid bacteria with proteolytic activity. To specifically enrich these beverages with peptides exhibiting targeted bioactivities, it is essential to select lactic acid bacteria strains possessing the requisite protease profiles. Additionally, the sensory properties of the final product can be enhanced using starter cultures with diverse metabolic capabilities, even in the absence of added flavoring agents. Given the imperative to develop waste-free technologies and enhance the profitability of the dairy industry, there is a growing need to efficiently utilize and transform acid whey into a broad spectrum of valuable products and food additives. This approach is justified not only by the nutritional benefits of the bioactive components in whey but also by the commercial potential of safe and health-enhancing products.

The paper focuses on the application of a multilevel, integrative and territorial approach to the protection of cultural heritage through planning instruments in Serbia. It points out the problems of the sectoral approach and discusses international recommendations that can be integrated into the planning methodology. The case study is the area of Djerdap National Park, which has an already established international and national importance. The research suggests that the cultural heritage in the area, with the exception of the Roman limes, is still recognized at the level of individual localities. The study emphasizes the importance of aligning all levels of governance to safeguard the whole spatial entity rather than focusing solely on its particular areas. The interna-tional and national importance of the planning area contributes to the strengthening of awareness of heritage and its institutional protection. However, the vitality of the area, which is key to its sustainable development, comes from the local level. Planning documents contribute to the inte-gration of local values and local communities into development programs and projects.

In order to shorten the detection time and improve the average precision on embedded devices, A lightweight and high accuracy model is proposed for passion fruit in complex environments (backlight, occlusion, overlap, sunny, cloudy, rainy). Firstly, replacing the backbone network of YOLOv5 with a lightweight GhostNet model reduces the number of parameters and computation while improving detection speed. Secondly, a new feature branch is added to the GhostNet network, and the feature fusion layer in the neck network is reconstructed to effectively combine the lower-level and higher-level features, which not only improves the accuracy of the model but also maintains its lightweight. Finally, the knowledge distillation methods are used to transfer the knowledge from the more capable teacher model to the less capable student model, which significantly improving the detection accuracy. The improved model is denoted as G-YOLO-NK. The average accuracy of the G-YOLO-NK network is 96.00%, which is 1.00% higher than the original YOLOv5s model. Furthermore, the improved model size is 7.14MB, reduced to half of the original model, and the real-time detection frame rate is 11.25 FPS on the Jetson Nano. Compared to the state-of-the-art model, the proposed model outperforms them in terms of average precision and detection performance. The present work provides an effective model for real-time detection of passion fruits in complex orchard scenes, which can provide valuable technical support for the development of orchard picking robots and greatly improve the intelligence level of orchards.

The impact of interaction SS with MJO on rainfall along Java Island to East Nusa Tenggara has been studied using daily rainfall observation data from 2140 weather observation stations, which are also equipped with GSMaP, OLR, and ERA5 data. There were 61 SS events found, 17 during active MJO and 44 in inactive MJO. Rainfall increases more in the western study area when the active MJO and more in the eastern study area when the inactive MJO is due to SS. SS reduces rainfall in the Jakarta region, regardless of the activity or inactivity of the MJO. SS causes extreme rainfall to only occur in a small part of certain areas, so it tends to significantly reduce the possibility of extreme rainfall. In the southern part of the IMC, SS predominates over MJO in supporting increased water vapor transport. Large-scale synoptic circulations like the monsoon, SS, and MJO can interact with local land-sea wind circulation to produce spatiotemporal variability in rainfall on Java Island. Rainfall mostly increases in the afternoon and decreases in the morning when SS occurs, whether there is MJO or not. Convective instability analysis indicates that SS increases precipitation, most likely by lowering CIN and raising VIMFC.

The Simultaneous Localization And Mapping (SLAM) scanner is an easy and portable Light Detection And Ranging (LiDAR) data acquisition device. Its main output is a 3D point cloud covering the scanned scene. Regarding the importance of accuracy in the survey domain, this paper aims to assess the accuracy of two SLAM scanners: the NavVis VLX and the BLK2GO Scanner. This assessment is conducted for both outdoor and indoor environments. In this context, two types of reference data are used: the Total Station (TS) and the static scanner Z+F Imager 5016. To carry out the assessment, four comparisons are tested: cloud to cloud, cloud to mesh, mesh to mesh, and edge detection board assessment. However, the results of the assessments confirm that the accuracy of indoor SLAM scanner measurements (5 mm) is greater than that of outdoor ones (between 10 mm and 60 mm). Moreover, the comparison of cloud to cloud provides the best accuracy regarding direct accuracy measurement without manipulations. Finally, based on the high accuracy, scanning speed, flexibility, and the accuracy differences between tested cases, it is confirmed that SLAM scanners are effective tools for data acquisition.

Glycosidic linkage analysis was conducted on the unfractionated polysaccharides in the alcohol-insoluble residues (AIRs) prepared from six red seaweeds (Gracilariopsis sp., Prionitis sp., Mastocarpus papillatus, Callophyllis sp., Mazzaella splendens, and Palmaria palmata) using GC-MS/FID analysis of partially methylated alditol acetates (PMAAs). The cell walls of P. palmata primarily contained mixed-linkage xylans and small amounts of sulfated galactans and cellulose. In contrast, the unfractionated polysaccharides of the other five species were rich in galactans displaying diverse 3,6-anhydro-galactose and galactose linkages with varied sulfation patterns. Different levels of cellulose were also observed. This glycosidic linkage method offers advantages for cellulose analysis over traditional monosaccharide analysis that is known for underrepresenting glucose in crystalline cellulose. Relative linkage compositions calculated from GC-MS and GC-FID measurements showed that anhydro sugar linkages generated more response in the latter detection method. This improved linkage workflow presents a useful tool for studying polysaccharide structural variations across red seaweed species. Furthermore, for the first time, relative linkage compositions from GC-MS and GC-FID measurements, along with normalized FID and total ion current (TIC) chromatograms without peak assignments, were analyzed using principal component analysis (PCA) as a proof-of-concept demonstration of the technique's potential to differentiate various red seaweed species.

Background: Educating college students about the importance of good sleep habits could lead to the adoption of healthier sleep routines, including sufficient sleep duration and sleep quality. The current pre-post study examines the impact of completing a sleep education program called “Sleep 101” on (1) sleep hygiene practices, (2) sleep quality, and (3) weekday and weekend sleep behaviors among college students. “Sleep 101” is an interactive online course developed to educate college students about the importance of sleep by addressing basic sleep physiology, the impact of sleep on mood, academic and physical performance, the interactions between sleep and various substances, and common sleep disorders. Methods: 338 college students were recruited from a midsized public university in the US and invited to participate in “Sleep 101”, of which 25 participants completed the baseline and post-intervention questionnaire. The Sleep Hygiene Index (SHI) was utilized to evaluate sleep hygiene practices, while standard questions were employed to assess weekday and weekend sleep behaviors and overall sleep quality. Results: Those who completed the study demonstrated a significant increase in weekday sleep duration and were less likely to engage in negative prior bedtime activities. In addition, 40% of those who completed baseline and post-intervention assessments noticed improvements in their sleep quality. Conclusion: These findings suggest that a brief online program is beneficial in improving sleep behaviors among college and could be a scalable approach to addressing current sleep issues and preventing future sleep problems in college students.

The profile of secondary metabolites occurring in apple cuticular layer is not only characteristic for particular apple cultivar, but also dynamically reflects various external factors in growing environment. In this study, the possibility to authenticate apple samples based on analysis of their cuticular layer extracts was investigated. Ultra-high-performance liquid chromatography coupled to high resolution tandem mass spectrometry (UHPLC-HRMS/MS) was employed for obtaining metabolomic fingerprints. In total, 274 authentic apple samples, four cultivars harvested within the seasons 2020 to 2022 in the Czech Republic and Poland were analysed. The generated complex data processed by univariate and multivariate statistical methods enabled to build classification models for discrimination of apple cultivars as well as their geographical origin. The models showed very good performance in differentiation of Czech and Polish samples for three of four cultivars: ‘Gala’, ‘Golden Delicious’ and ‘Idared’, moreover, the validity of the models was verified over harvest seasons. The diagnostic markers, besides metabolites of triterpene biosynthetic pathway, mainly represented wax esters. ‘Jonagold’, which is known to be susceptible to mutations, was the only cultivar for which the unambiguous classification of geographical origin was not possible.

Superior fiber quality is one of the most important objectives in cotton breeding. To detect the genetic basis underlying fiber quality, an F2 population containing 413 plants was constructed by crossing Jifeng 914 and Jifeng 173, both of which have superior fiber quality, with Jifeng 173 being better. Five fiber quality traits were investigated in the F2, F2:3, F2:4, and F2:5 populations. Quantitative trait loci (QTL) mapping was conducted based on a high-density genetic map containing 11,488 single nucleotide polymorphisms (SNPs) and spanning 4,202.12 cM in length. Transgressive segregation patterns and complex correlations in the five tested traits were observed. A total of 108 QTLs were found, including 27 for fiber length (FL), 16 for fiber strength (FS), 24 for micronaire (MC), 17 for fiber uniformity (FU), and 24 for fiber elongation rate (FE). Chromosome A7 contained 12 QTL, ranking the first. No QTL was found on chromosome D1 and D11. Each QTL contributed 1.98%–21.45% to the phenotypic variation (PV), including 13 major effect QTLs that contributed more than 10% toward PV. Two QTLs could be repeatedly detected in three populations, including qFL-D3-2 in F2, F2:4, and F2:5 with 9.18%–21.45% of PV, qFS-A11-1 in F2:3, F2:4 and F2:5 with 6.05%–10.41% of PV. Another seven stable QTLs could be detected in two populations, including four major effect QTLs: qFL-A12-3, qFS-D10-2, qMC-D6-2, and qMC-D8-1. Fourteen QTL-overlapping regions were found, which might explain the complex correlations among the five phenotypic traits. Four regions on chromosome A11, D3, D6, and D10 covered by both stable and major effect QTLs are promising for further fine mapping. The genomic regions of the two QTLs detected in three populations and the four major effect QTLs contain 810 genes. Gene functional analysis revealed that the annotated genes are mainly involved in protein binding and metabolic pathways. Fifteen candidate genes in the qFL-D3-2 region are highly expressed in fiber or ovules during fiber initiation, elongation, secondary cell wall thickening, or maturation stages. qRT-PCR revealed that Ghir_D03G005440.1 and Ghir_D03G011310.1 may play a role in promoting fiber initiation, Ghir_D03G006470.1 may be beneficial for promoting fiber elongation. This study provides more information for revealing the molecular genetic basis underlying cotton fiber quality.

Currently there are fewer depth models applied to pepper picking detection, while the existing generalized neural networks have problems such as large model parameters, long training time, and low model accuracy.In order to solve the above problems, this paper proposes a Yolo-chili target detection algorithm for chili pepper detection. First, the classical target detection algorithm yolov5 is used as a benchmark model, and an adaptive spatial feature pyramid structure combining the attention mechanism and the idea of multi-scale prediction is introduced to improve the model's detection effect on occluded peppers and small target peppers. Secondly, a three-channel attention mechanism module is introduced to improve the algorithm's long-distance recognition ability and reduce the interference of redundant testers. Finally, the quantized pruning method is used to reduce the model parameters and realize the lightweight processing of the model. Applying the method to the homemade chili pepper dataset, the AP value of chili pepper reaches 93.11%; the accuracy rate is 93.51% and the recall rate is 92.55%.The experimental results show that yolo-chili is able to achieve accurate and real-time pepper detection under complex orchards.

The temporary immersion system bioreactor named GreenTray®[2], [3]presents advantages over the existing ones. Firstly, there is no need to use forceps to move the shoots or plantlets in or out of the recipient, neither the use of scalpel to divide them. Secondly, the basis of the shoot can remain in the GreenTray® and can sprout again in several cycles of growth. These two characteristics reduce the costs in the process of micropropagation. Besides, shoots or plantlets development is enhanced by the aeration of the recipient, thus enriching with CO2 the recipient atmosphere. The chapter describes and provides images and values of interest in (1) the micropropagation process of some commercial Prunus or Pyrus rootstocks; (2) the plantlet growth under autotrophic conditions; and (2) the inoculation of plants with pathogens that reproduce in vitro the symptoms observed in vivo, using the GreenTray® bioreactor.

Aiming at the problems of inaccurate segmentation of long object and information loss of small object in real-time semantic segmentation algorithm, this paper proposes a lightweight multi-branch real-time semantic segmentation network based on BiseNetV2. The new auxiliary branch makes full use of spatial details and context information to cover the long object in the field of view. Meanwhile, in order to ensure the inference speed of the model, the asymmetric convolution is used in each stage of the auxiliary branch to design a structure with low computational complexity. In the multi-branch fusion stage, the alignment and fusion module is designed to provide guidance information for deep and shallow feature mapping, so as to make up for the problem of feature misalignment in the fusion of information at different scales, and thus reduce the loss of small target information. In order to further improve the model’s awareness of key information, a global context module is designed to capture the most important features in the input data. The proposed network uses NVIDIA GeForce RTX 3080 Laptop GPU experiment, on the road street view data set Cityscapes and CamVid average occurring simultaneously ratio reached 77.1% and 78.4% respectively, with running speed of 127 frames/s respectively and 112 frames/s. The experimental results show that the proposed algorithm can achieve real-time segmentation and improve the accuracy significantly, showing good semantic segmentation performance

Strawberry root rot caused by Neopestalotiopsis clavispora is one of the main diseases of strawberry and significantly impacts the yield and quality of strawberry fruit. There are now no effective control techniques available except for fungicide sprays, which may directly impact consumers. Biological control is becoming an alternative method for the control of plant diseases to replace or decrease the application of traditional synthetic chemical fungicides. Trichoderma is widely used as a biological agent for controlling strawberry root rot. In order to provide resources for screening the highly effective biocontrol fungus for controlling strawberry root rot caused by Neopestalotiopsis clavispora, the biocontrol mechanism,the control effects of Trichoderma asperellum CMT10 against strawberry root rot and growth-promoting effects on strawberry seedlings were investigated by plate culture, microscopy observation and root drenching methods.The results showed that CMT10 had obvious competitive, antibiotic and hyperparasitism effects on Neopestalotiopsis clavispora CMGF3. The CMT10 could quickly occupy nutritional space, and the inhibition rates of CMT10 against CMGF3 in confrontation culture on 7 d was 65.49%. The inhibition rates of volatile metabolite and fermentation metabolite produced by CMT10 against CMGF3 were 79.67% and 69.84%, respectively. The mycelium of strain CMT10 can act as hyperparasites by making contacting, winding and penetrating hyphae of CMGF3. Pot experiment showed that the biocontrol efficacy of CMT10 on strawberry root rot caused by Neopestalotiopsis clavispora was 63.00%. CMT10 had obvious promotion effect on strawberry growth, the plant height, root length, total fresh weight, root fresh weight, stem fresh weight and root dry weight, with the promotion rates were 20.09%, 22.39%, 87.11%, 101.58%, 79.82% and 72.33%, respectively. Overall, this study showed the ability of Trichoderma asperellum CMT10 to control strawberry root rot and their potential to develop as novel biocontrol agents to replace chemical fungicides for eco-friendly, sustainable agriculture.

In this paper we study a class of impulsive delayed neural networks with parameter uncertainties and reaction-diffusion terms. Using the properties of M-matrices and some inequality techniques, some sufficient conditions are derived to guarantee the global exponential stability of the given system. The results obtained are presented by simple algebraic inequalities, which are certainly more concise than previous methods. Finally, the validity and usefulness of our results are illustrated by arithmetic examples.

Pyrops candelaria is one of the common pests of fruit trees, but the research on the pathogenic microorganisms it may carry is very limited. Therefore, it is essential to reveal the pathogenic microbes it carries and their potential hazards. This study found a new virus from the transcriptome of P. candelaria, which was first reported in P. candelaria and named as PyCaV (Pyrops candelaria associated virus). RACE and bioinformatics assay revealed that the full-length of PyCaV is 10855 bp with the polyA tail, containing a single open reading frame (ORF) encoding a polyprotein consisting of 3171 amino acid (aa). The virus has a typical Iflavirus structure, including two rhv domains, a RNA helicase domain (HEL), a 3C cysteine protease domain (Pro), and a RNA-dependent RNA polymerase domain (RdRp). Further phylogenetic analysis revealed that this virus belongs to family Iflaviridae and sequence alignements analysis suggedted PyCaV is new member in unassigned genus of family Iflaviridae. Further in-depth analysis of virus-infection-part showed that PyCaV is distributing in the whole longan lanternfly, including its head, chest, and abdomen, but more PyCaV was identified in the chest. The distribution of PyCaV in different parts of P. candelaria was further explored, which showed that more PyCaV were detected in its piercing-sucking mouthparts and chest viscera. Statistical analysis showed that the PyCaV infection was affected by time and locations.

Apis mellifera, especially weak ones, are highly vulnerable to Carpoglyphus lactis mites, which can rapidly infest and consume stored pollen, leading to weakened colonies and potentially colony collapse. This study aimed to ascertain and investigate the prevalence of this mite in honeybee colonies across 9 provinces in the Republic of Korea (ROK). A total of 615 honeybee colonies were collected, from 66 apiaries during the spring and 58 apiaries during the summer of 2023. A 1,242 bp segment of the the Cytochrome c oxidase subunit 1 (COI) gene was amplified using the polymerase chain reaction method. The detection levels of C. lactis in the honeybees were compared between winter and summer. Based on the COI sequence analysis, the nucleotide sequence similarity of C. lactis mites isolated in the ROK with those from China (NC048990.1) was found to be 99.5%, and with those from the United Kingdom (KY922482.1) was 99.3%. This study is the first report of C. lactis in Korean apiaries. The findings in this study demonstrate a significantly higher detection rate in winter, which is 4.1 times greater than that in summer (p &lt; 0.001). Furthermore, the results underscore the usefulness of molecular diagnostic techniques for detecting C. lactis mites.

With the burgeoning growth of online retail, the issue of counterfeit products has become a significant threat to both consumer trust and brand integrity, posing challenges to sustainable market practices. Online retail platforms are promoted to redesign their channel structures and enhance brand traceability to tackle counterfeits using blockchain technology. To investigate the interactions between blockchain technology and the channel structures of online retail platforms, we design a game theory model incorporating a manufacturer with(out) blockchain participation selling products via an online retail platform that operates an agency channel and/or a reselling channel. We show that the critical trade-off of blockchain participation comprises the brand assurance effect of the blockchain, the channel competition intensification effect, and the blockchain adoption cost. The platform is capable of strategically designing the channel structure to encourage (while discouraging) blockchain participation by the manufacturer. Our analysis highlights the complementarity between blockchain participation and the channel structure. Furthermore, the effect of the consumer’s belief in the reselling channel, the commission fee in the agency channel, and the substitutability between channels are investigated in depth. The research provides valuable insights for online retail platforms and policymakers seeking to foster a sustainable and trustworthy e-commerce ecosystem.

COX II containing a dual core CuA active site is one of the three core subunits of mitochondrial Cco, which plays a significant role in the physiological process. In this report, the full-length cDNA of COXⅡ gene was cloned from Sitophilus zeamais, which had an ORF of 684 bp encoding 227 amino acids residues. The predicted COXⅡ protein had a molecular mass of 26.2 kDa with pI value of 6.37, and multiple sequence alignment and phylogenetic analysis indicated that Sitophilus zeamais COXⅡ had high sequence identity 78.51% with the COXⅡ of other insect species, especially similarity to sitophilus oryzae. This gene was subcloned into the prokaryotic expression vector pET-32a, and induced by IPTG in E.coli Transetta (DE3) expression system. Finally the COXⅡ with 6-His tag was purified using affinity chromatography with Ni²⁺-NTA agarose. WB showed the recombinant COXⅡ was about 44 kD, and the concentration of fusion protein was 50μg/mL. UV-spectrophotometer and infrared spectrometer analysis showed that recombinant COXⅡ could catalyze the oxidation of substrate Cytc, and influenced by AITC. It was found that AITC could form a hydrophobic region with COXⅡ protein via molecular docking, besides, a sulfur atom of AITC structure could form a length of 2.9 Å hydrogen bond with Leu-31. These results will provide valuable information for elucidating the role of COXⅡ in Sitophilus zeamais responses to AITC, meanwhile, it will helpful to carry out a point mutation in AITC binding sites for the future research.

The properties of the annual, semiannual and triennial oscillations (AO, SAO and TO) in the middle atmosphere have been investigated using the TIMED/SABER temperature data. The Lomb-Scargle and wavelet spectra were used to determine the dominant oscillations in the background temperature field. The AO is prominent at the mid-latitudes. The AO amplitudes present an asymmetry between the two Hemispheres, being larger in the mesosphere than in the stratosphere. The SAO dominates the tropical regions, with three amplitude maxima at altitudes of 45, 75, and 85 km. The SAOs in the upper mesosphere (75 km) are out of phase with those in the mesopause (85 km) in the tropical regions, which can generate an enhancement of 11 K at each equinox, contributing to the lower mesospheric inversion layer. The TO is significant in the tropical region, with amplitude being maximum at 35, 45 and 85 km. Result shows that there may be potential interaction by the TO with SAO at 85km at the equator. The relation between ENSO and TO has also been discussed. The ENSO signal may modulate the amplitude of the TO, mainly in the lower stratosphere. The real origin of the TO may lie in the wave-mean-flow interaction.

The paper describes the new method for image compression based on coordinated group signal transformation. The algorithm is a type of difference coding. Coordinated processing significantly simplifies the difference signal conversion scheme using a single group codec for all signals. The described method considers color channels as correlated signals of a multi-channel communication system. The specifics of the processed data required modification of the coordinated group processing algorithm. First, we changed how to calculate the difference signals to prevent data loss. Secondly, the group codec was supplemented with a neural network to improve the quality of reconstructed images. We considered the following types of neural networks: fully connected, recurrent, convolution, and convolution in the Fourier space. Based on the simulation results, it is best to use fully connected neural networks if the goal is to minimize processing delay time. These networks have a response time of 13 ms. On the other hand, if the priority is to improve quality in cases where delays are not critical, then convolution neural networks in the Fourier space should be used. These networks have a response time of 140 ms and are of significant interest.

As the world population grows, fulfilling the need for biomaterials in the healthcare system becomes increasingly important. Biomaterials, which include metals, polymers, ceramics, and composites, play an important role in the creation of medical devices that improve people's lives. The European Society for Biomaterials described biomaterials as non-biological materials used in medical devices to interact with biological systems. This definition has developed to encompass materials that treat, assess, or replace tissues or bodily functions. Biocompatibility, as defined by the FDA, is a key feature of biomaterials, as is the requirement to fulfil design requirements such as mechanical performance, geometry, and electrical control. Over the last decade, advances in regenerative medicine and tissue engineering have boosted biomaterials' usage in medical applications dramatically. Despite its promise, scientists, engineers, and physicians continue to face significant challenges due to the complexity of biomaterials. Biomaterials have various benefits, including biodegradability, non-toxicity, and biocompatibility, making them extremely useful for replacing, sustaining, or improving biological activities in damaged tissues. They are used in a wide range of applications, including tissue engineering implants, human tissue healing and regeneration, medication delivery systems, and biosensors. This study gives insights into the fundamental characteristics, case studies, and ethical issues associated with the usage and use of biomaterials, further examining their potential and significance in healthcare and medicine.

The studied solar pot is a recent invention, which gained a utility model protection in 2021 from the Hungarian Intellectual Property Office under patent number 5489. The device is made for environmentally friendly cooking or heating (by utilizing solar energy) of foods and liquids. Its structure is similar to a double pipe heat exchanger, it has an outer mantle and an inner cooking tank. The goals of the paper are proposing a new physically-based mathematical model describing the solar pot and carrying out computer experiments with it, assembling an experimental system of the pot connected with a solar collector and performing measurements on it. Based on the results, the solar pot can successfully be used for cooking or sterilizing foods or liquids during the studied time period, in Hungary.

The research reported on this paper was aimed at improving the overall efficiency of a PDO certified artisanal cheese production process. Being a PDO certified foodstuff by the EU, it is considered to have properties and qualities determined by the geographical environment in which is made, with its production taking place in a specific and determined geographical location, in this case the Serra da Estrela region. In that sense, the authors conducted a mapping according to a systemic perspective of the processes involved in the context of manufacturing and distribution of certified Serra da Estrela cheese. Numerous methods were used throughout the process, such as a systemic design analysis, and techniques derived from ethnographic methods, which led to the collection of data in the field and consequently provided the immersion of the researcher in genuine work situations. Critical points were identified and emphasized in the systemic map with the purpose of encouraging initiatives to address and overcome the gaps and inefficiencies detected. The systemic design analysis triggered the development of design work. Observations following an ethnographic approach identified ergonomic risks in cheese making during the process of cutting excess chips, fostering the emergence of musculoskeletal disorders at the wrist. A tool that fits best to the task at hand was developed. A prototype of the new tool enabled collecting feedback from use in the work context, in order to inform product development. The domains of agricultural production and microbiology, considering the specific microorganisms developed trough the ripening process of the cheese, turned out to be aspects of high importance for the issue under focus, contributing to a broader understanding of the ripening process and its risks, simultaneously improving the efficiency and success of cheese production. If it were not for the systemic analysis, which served as a link between the boundaries of distinct domains such as the risk of microorganism contamination, ergonomics, energy efficiency, legislation and regulation policies, transportation challenges and economic viability, approached throughout the research. Simultaneously creating bridges between them, the various problems might not have been detected in the first place, as they are usually addressed in specialized disciplines, predetermined by the restrictions of each specific area of knowledge. As a consequence of the development of this research, which was based on an analysis that sought to establish possible connections between various disciplines and tried to constantly maintain a holistic perspective, making new connections and observing the issues from a new angle, apart from the already established methodologies. All this allowed to lay out the seeds for the development of a plan to tackle the critical points identified by the systemic analysis reported in this paper.

Abstract: Transcription factors are crucial pre-transcriptional regulatory mechanisms that can modulate the expression of downstream genes by binding to their promoter regions. DOF (DNA binding with One Finger) proteins are a unique class of transcription factors with extensive roles in plant growth and development. Our previous research indicated a decrease in iron content in chlorotic bamboo leaves. However, to our knowledge, genes related to iron metabolism pathways in bamboo species have not yet been studied. Therefore, in the current study, we identified iron metabolism-related (IMR) genes in bamboo and determined the transcription factors that significantly influence them. Among these, DOFs were found to have widespread effects and potentially significant impacts on their expression. We identified specific DOF members in Dendrocalamus latiflorus with binding abilities through homology with Arabidopsis DOF proteins, and established connections between some of these members and IMR genes using RNA-seq data. Additionally, molecular docking confirmed the binding interactions between these DlDOFs and the DOF binding sites in the promoter regions of IMR genes. The co-expression relationship between the two gene sets was further validated using q-PCR experiments. This study paves the way for research into iron metabolism pathways in bamboo and lays the foundation for understanding the role of DOF transcription factors in D. latiflorus.

This paper is focused on typical rural settlements in the Stara Planina Mountain area in Serbia. They are distinguished by their authenticity, identity and character, and they have still not been destroyed by inappropriate development as is the case in some other mountain areas in Serbia, where the effects of urbanization, globalization and homogenization are obvious. Consequently, there is a need to prevent these effects in mountain areas where there is a threat of disbalance between development and the inherited natural and cultural values. The paper starts from several important concepts that relate contemporary approaches to cultural heritage preservation, place morphology and planning future development. The concept definitions from recent documents from related fields are used. These concepts are then applied to the area of Stara Planina Mountain and its rural settlements. The necessity for an integrative approach to planning this area with significant natural and anthropogenic potential is pointed out, including its integration into international programs of sustainable development.

The wetlands in northeastern Bangladesh are home to some of the most prolific and valuable ecosystems on the planet, offering a wide range of benefits to both the local and wider communities. A limited number of research on this topic have been carried out in various wetlands in coastal hilsa, but none have been located in the northeastern region of Bangladesh. Thus, the goal of this study was to better understand the most commercially relevant species (anadromous hilsa) in northeastern Bangladesh as well as to assess the wetland ecosystem services more thoroughly with the contribution of their fish genetic resources. In addition to laboratory studies, fieldwork was done in the fishing settlements along the Surma River, Hakaluki Haor, and Tanguar Haor. The study classified 77 fish species into 21 subcategories of ecosystem services, of which 56% were not threatened, 17% were vulnerable, and 10% were highly endangered. The species Hilsa was found to be the most economically significant, accounting for 1% of the GDP overall. The study determined if the hilsa stock of the examined wetlands maintains a single or several subpopulations in comparison to other parts of the country when they migrate from saline water to northeastern Bangladesh (freshwater). But when compared to other groups, the FST score was between 0.000 to 0.017, indicating that the populations are identical and that there is genetic material sharing between them. Additionally, these statistics imply that the Sylhet haor and adjacent river systems contain a single stock of Hilsa fish. Nevertheless, a number of stresses and risks, including overexploitation, illicit and destructive fishing, siltation, and natural disasters like flash floods, have been linked to changes in the supply of hilsa and other ecosystem services. This study also emphasizes the necessity of policy attention and research to address the concerns.

Severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) continues to be a global threat due to its ability to evolve and generate new subvariants, leading to new waves of infection. Additionally, other coronaviruses like Middle East respiratory syndrome coronavirus (MERS-CoV, formerly known as hCoV-EMC) which first emerged in 2012, persists and continues to present a threat of severe illness to humans. The continued identification of novel coronaviruses, coupled with the potential for genetic recombination between different strains, raises the possibility of new coronavirus clades of global concern emerging. As a result, there is a pressing need for pan-CoV therapeutic drugs and vaccines. After extensive optimization of an HCV protease inhibitor screening hit, a novel 3CLPro inhibitor (MK-7845) was discovered and subsequently profiled. MK-7845 exhibited nanomolar in vitro potency with broad spectrum activity against a panel of clinical SARS-CoV-2 subvariants and MERS-CoV. Furthermore, when administered orally, MK-7845 demonstrated a notable reduction of viral burdens by &gt;6 log orders in the lungs of transgenic mice infected with SARS-CoV-2 (K18-hACE2 mice) and MERS-CoV (K18-hDDP4 mice).

The continuous casting process of helical fiber reinforced metal matrix composites was proposed, and the experimental equipment was designed and manufactured. The relationship model be-tween the process parameters and the helical shape of the fibers in the metal matrix is analyzed by differential geometry. Helical carbon fiber reinforced lead matrix composites were prepared under different conditions. When the melting temperature and cooling intensity were increased, the helical radius of helical carbon fiber in lead matrix was increased. When the fiber rotation speed was increased, the helical radius was decreased, and the helical pitch was de-creased proportionally. The experimental results are consistent with the process model. Carbon fiber rein-forced aluminum composites were prepared. Scanning electron microscopy showed that the infiltration between the aluminum matrix and the carbon fiber was not complete. As the volume fraction of carbon fiber which was added in composites is too small, the mechanical properties of the composites have not been significantly improved.

This article presents an innovative approach to the design of a safe adaptive backstepping control system. Tailored specifically for underactuated marine robots, the system utilizes simple sensors for enhanced practicality and efficiency. Given their operation in diverse oceanic environments fraught with various sources of uncertainties, ensuring the system's safe and robust behavior holds paramount importance in the control literature. To address this concern, this paper introduces a control strategy designed to ensure robustness at both the kinematic and dynamic levels. By emphasizing the compensation for the system uncertainties, the design integrates a straightforward fuzzy system structure. To further ensure the system's safety, a funnel surface is defined, followed by the design of a suitable nonlinear sliding surface as a function of the funnel and tracking error. Specifically leveraging the Lyapunov function, the study formally establishes the Semi-globally Practically Finite-time Stability of the closed-loop system, validated through simulations conducted on underactuated marine robots.

Several types of guided bone regeneration materials are available with various properties and clinical indications. Among them, dentin-derived matrix from extracted teeth is an excellent alternative to traditional graft materials, such as allografts and xenografts. Different clinical preparation protocols exist: block form versus powder form, demineralized versus non-demineralized form. Out of these methods, demineralization protocols for dentin-derived matrix from extracted teeth have been noted for a wide range of successful clinical outcomes. The purpose of this animal study was to find out the most effective method of demineralizing dentin-derived matrix to result in the highest regenerative ability in the bone graft material in rabbit calvaria. The study conducted a comparative histomorphometric analysis of four groups in distinguished matrix conditions: a control group without graft placement, a non-demineralized dentin-derived matrix graft placement group, a 15-minute demineralized dentin-derived matrix graft placement group, and a 30-minute demineralized dentin-derived matrix graft placement group. Regenerative processes were evaluated three times at 2, 4, and 8 weeks post-graft placement. These groups of rabbits were evaluated randomly in a blinded setting to prevent bias. Among the four groups compared, the group with a 15-minute demineralized dentin-derived matrix graft showed the most efficient bone regeneration in the histomorphometric analysis. Based on this animal study, it was apparent that a 15-minute demineralization of dentin-derived matrix is the preferred preparation protocol to maximize the regenerative potential in the matrix.

Promoting green development has become an important way to optimize the ecological and economic structure and promote sustainable development. The Yangtze River Economic Belt is an important economic corridor in China, and it remains to be examined whether the implementation of environmental regulations has enhanced the green total factor productivity (GTFP) of cities. This paper calculates the green total factor productivity of 107 cities within the Yangtze River Economic Belt by using the super-efficient SBM model and the GML index with Chinese city panel data from 2007-2019 and measures the intensity of environmental regulations through textual analysis. The bidirectional fixed-effects model constructed in this paper suggests an inverted U-shaped relationship between environmental regulation and GTFP, which is confirmed by a series of robustness tests. Green technology innovation and advanced industrial structure play a mechanism role in this. In regions with lower levels of green technology and industrial structure, the inverted U-shaped relationship between environmental regulation and green total factor productivity is more significant. In addition, the phenomenon of GTFP rising and then falling because of environmental regulation is more obvious in cities in the middle and upper reaches of the Yangtze River and outside the urban agglomerations. Therefore, when formulating environmental regulation policies, it is necessary to balance the relationship between economic development and environmental protection and harmonize the environment and economic development of the entire Yangtze River Basin.

Cocoa (Theobroma Cacao, L.) represents an important market that gained relevance and became an esteemed commodity thanks to cocoa powder, chocolate, and other related products. This work has analyzed 59 cocoa powder samples from the European market. Three distinct subgroups were identified: organic or conventional, alkalized or not alkalized, and raw or roasted processing. The impact of the technological process was evaluated on the pH, color, and compositional traits, as content of biogenic amines and salsolinol. The phenolic fraction was also investigated trough both common and emerging methods. Results depict that the influence of the agronomical practices (organic/conventional) did not affect significatively (p&lt;0.05) the composition of cocoa powders; similarly, the roasting process was not discriminative for the compounds traced. On the other hand, the alkalinization process greatly impacted on color, and pH, no matter of cocoa provenience, obtention, or other processes, also resulting reducing the phenolic fraction of treated samples. Principal components analysis confirmed that the alkali process acts on pH, color, and phenolic composition, but not on other bioactives molecules (BAs and salsolinol). All samples resulted safe while alkalized powders have a great reduction in beneficial biocompounds. A novel strategy could be to emphasize non-alkalized powders in the label, to meet the demand for more beneficial products.

Oral squamous cell carcinoma (OSCC) is a highly prevalent and aggressive malignancy, with mortality rates that reach 60%, mainly due to an excessive diagnostic delay. MiRNAs, a class of crucial epigenetic gene-expression regulators, have emerged as potential diagnostic biomarkers, with >200 molecules reported to be dysregulated in OSCC. We had previously established an in silico methodology for the identification of the most disease-specific molecules by bridging genetics and epigenetics. Here, we identified the stage-specific miRNAs that govern the asymptomatic early stages of oral tumorigenesis by exploiting the reverse interplay between miRNA-levels and their target-genes’ expression. Incorporating gene expression data from our group’s experimental hamster model of sequential oral oncogenesis, we bioinformatically detected the miRNAs that simultaneously target/regulate >75% of the genes that are characteristically upregulated or downregulated in the consecutive stages of hyperplasia, dysplasia and early-invasion OSCC, while exhibiting the opposite expressional dysregulation in OSCC-derived tissue and/or saliva specimens. We found that all stages share the downregulation of miR-34a-5p, miR124-3p, and miR-125b-5p, while miR-1-3p is underexpressed in dysplasia and early-invasion. Malignant early-invasion stage is distinguished by the downregulation of miR-147a and the overexpression of miR-155-5p, miR-423-3p and miR-34a-5p. The identification of stage-specific miRNA molecules may facilitate their utilization as biomarkers for presymptomatic OSCC diagnosis.

Estimating the ocean’s subsurface thermohaline information from satellite measurements is essential for understanding ocean dynamics and El Niño phenomenon. This paper proposes an improved double-output Residual Neural Network (DO-ResNet) model to concurrently estimate the ocean subsurface temperature (OST) and ocean subsurface salinity (OSS) in the tropical Western Pacific using multi-source remote sensing data, including sea surface temperature (SST), sea surface salinity (SSS), sea surface height anomaly(SSHA), sea surface wind (SSW), and geographical information (including longitude (LON) and latitude (LAT)). In the model experiment, Argo data were used to train and validate the model, and the root mean square error (RMSE), normalized root mean square error (NRMSE) and coefficient of determination (R²) were employed to evaluate the model's performance. The results showed that the sea surface parameters selected in this study have a positive effect on the estimation process, and the average RMSE and R² values for estimating OST (OSS) by the proposed model are 0.34 °C (0.05 psu) and 0.91 (0.95), respectively. Under the data conditions considered in this study, DO-ResNet demonstrates superior performance relative to the extreme gradient boosting model, random forest model, and artificial neural network model. Additionally, this study evaluates the model’s accuracy by comparing its estimations of OST and OSS across different depths with Argo-derived data, demonstrating the model's ability to effectively capture the most spatial features, and by comparing NRMSE across different depths and seasons, the model displays strong seasonal adaptability. In conclusion, this research introduces a novel artificial intelligence technique for estimating OST and OSS in the tropical Western Pacific Ocean.

The normal growth and development of skeletal muscle is essential for the health of the body. The regulation of skeletal muscle by intestinal microorganisms and their metabolites has been continuously revealed. Acetate is the predominant short-chain fatty acid synthesized by gut microbiota through the fermentation of dietary fiber, however, the underlying molecular mechanisms governing the interaction between acetate and skeletal muscle during rapid growth stage remain to be further elucidated; Here, specific pathogen-free (SPF) mice, germ-free (GF) mice, and germ-free mice supplemented with sodium acetate (GS) were used to evaluate the effects of acetate on skeletal muscle growth and development of young mice with gut microbiota deficiency; We found the concentration of serum acetate, body mass gain, succinate dehydrogenase activity and expression of myogenesis maker gene of skeletal muscle in the GS group was higher than GF group following sodium acetate supplement. Furthermore, the transcriptome analysis revealed that acetate activated biological processes regulating skeletal muscle growth and development in GF group that are inhibited due to gut microbiota deficiency. In vitro experiment, we proved that acetate up-regulated Gm16062 to promote skeletal muscle cell differentiation; Overall, our findings proved that acetate promote skeletal muscle growth and development in young mice via increase Gm16062 expression.

Phased injection of natural gas into internal combustion marine engines is a promising solution for optimizing performance and reducing harmful emissions, particularly unburned methane, a potent greenhouse gas. This innovative practice distinguishes itself from continuous injection because it allows for more precise control of the combustion process with only a slight increase in system complexity. By synchronizing the injection of natural gas with the intake and exhaust valve opening and closing times while also considering the gas path in the manifolds, methane release into the atmosphere is significantly reduced, making a substantial contribution to efforts to address climate change. Moreover, phased injection improves the efficiency of marine engines, resulting in reduced overall fuel consumption, lower fuel costs, and increased ship autonomy. This technology has been tested on a single-cylinder, large-bore, four-stroke research engine designed for marine applications, operating in dual-fuel mode with diesel and natural gas. Performance was compared with that of the conventional continuous feeding method. Evaluation of the effect on equivalent CO2 emissions indicates a potential reduction of up to approximately 20%. This reduction effectively brings greenhouse gas emissions below those of the diesel baseline case, especially when injection control is combined with supercharging control to optimize the air-fuel ratio.

In numerical simulations, achieving high accuracy without significantly increasing computational costs is often challenging. To address this, this paper presents an improved finite volume weighted essentially non-oscillatory (WENO) scheme tailored for applicability in computational fluid dynamics (CFD) and implemented in the flow solver NUAA-Turbo for simulating turbomachinery flows using both RANS and RANS/LES coupling. Firstly, the new WENO scheme is validated against classic numerical test cases to assess its stability and reliability in handling discontinuities, the Double problem, and Raleigh-Taylor (RT) instability issues. Compared to the original format, this enhanced finite volume WENO scheme demonstrates superior stability near discontinuities and resolves flow features with the same grid resolution more effectively. Next, for engineering applications related to turbomachinery, such as compressor and turbine characteristics, computations are performed using RANS, and the results obtained using WENO-ZQ3 and WENO-JS3 are compared. Finally, the new fifth-order WENO scheme is applied to RANS/LES coupled simulations of turbine wakes and film cooling. The results show that the enhanced finite volume WENO scheme offers improved stability and accuracy in engineering applications, allowing for high-precision calculations with fewer grid points to capture more detailed flow physics, thereby reducing computational costs in aerodynamic applications.

To conduct high-precision and high-resolution numerical simulation of complex flow structures in turbomachinery, a high-order finite volume weighted essentially non-oscillatory (WENO) scheme for the large eddy simulation (LES) is improved and embedded into the three-dimensional viscous unsteady CFD solver NUAA-Turbo. Firstly, the spectral characteristics and unsteady convergence of the improved WENO scheme are studied. Compared with the classical WENO scheme, the improved WENO scheme has better dissipation and dispersion characteristics and faster convergence speed. Then, the coefficient CW of the Wall-Adapting Local Eddy-viscosity (WALE) model is calibrated by decaying homogeneous isotropic turbulence (DHIT) test case. Finally, the scheme is applied to conduct high-precision LES calculations of turbulent boundary layer flow, supersonic compression corner flow, and low-pressure turbine cascade separation flow. The numerical simulation results show that this WENO scheme has excellent shock wave capture ability and turbulence resolution and can capture more flow field details with less mesh size, greatly reducing the computational cost and laying a foundation for large-scale engineering application of LES.

To secure logic circuits against the illegal copying the insertion of the so-called key bit inputs using XOR/XNOR gates has been proposed in . The inserted gates modify (lock) the behavior of the original circuit and only the correct choice of the secret key bits guarantees the equivalent behaviour of the locked circuit to the original circuit. To break this kind of security, i.e. to find the secret key bits, there was a SAT solver based attack proposed in . The aim of this work is to experimentally verify this attack on several locked circuits with various number of primary inputs and outputs and with various number of gates. Except for the random placement of the key gates we evaluate also the positioning with chaining elimination. The obtained and presented results show that we were able to unlock 10 of 11 circuits within few minutes on a common PC.