Antibiotic resistance is a pressing global and planetary health challenge. Links between climate change, antibiotic use and the emergence of antibiotic resistance have been well documented, but less attention has been given to the impact(s) of earth systems on specific bacterial livestock diseases at a more granular level. Understanding the precise impacts of climate change on livestock health – and in turn the use of antibiotics to address that ill-health – is important in providing an evidence base to tackle such impacts and to develop practical, implementable and locally acceptable solutions within and beyond current antibiotic stewardship programmes. In this paper, we set out the case for better integration of earth scientists and their specific disciplinary skill set (specifically, problem-solving with incomplete/fragmentary data; the ability to work across four dimensions and at the interface between the present and deep/geological time) into planetary health research. We then discuss a methodology that makes use of risk mapping, a common methodology in earth science but less frequently used in health science, to map disease risk against changing climatic conditions at a granular level. This will enable predictions of future disease risk and risk impacts based on predicted future climate conditions, and thus provide an evidence base for planetary health activists to influence policy and develop mitigations. Our case study – of climate conditions’ impact on livestock health in Karnataka, India – clearly evidences the benefit of integrating earth scientists into planetary health research.

The quality of dietary patterns can be optimized using a mathematical technique known as linear programming (LP). LP methods have rarely been applied to individual meals. The present LP models optimized the breakfast meal for those participants in the nationally representative National Health and Nutrition Examination Survey 2011-2014 who ate breakfast (n=11,565). The Nutrient Rich Food Index (NRF9.3) was a measure of diet quality. Breakfasts in the bottom tertile of NRF9.3 scores (T1) were LP-modeled to meet nutrient requirements without deviating too much from current eating habits. Separate LP models were run for children and for adults. The LP-modeled breakfasts resembled the existing ones in the top tertile of NRF9.3 scores (T3), but were more nutrient-rich. Favoring fruit, cereals, and dairy, the LP-modeled breakfasts had less meat, added sugars and fats but more whole fruit and 100% juices, more whole grains, and more milk and yogurt. LP modeling methods can build on existing dietary patterns to construct food-based dietary guidelines and identify individual meals and/or snacks that need improvement.

The purpose of this research was two-fold: (a) to observe whether highly trained adolescent swimmers abide to vitamin D supplement recommendations; and (b) to monitor changes in circulating 25-hydroxyvitamin D (25(OH)D) that occur between the autumn and winter months. Twenty swimmers (age: 17 ± 2 years) from a UK high-performance swimming club volunteered to complete two blood spot cards to determine 25(OH)D concentration: the first in an autumn training phase (October) and the second during winter training (January). All swimmers were advised to consume vitamin D3 supplements across the assessment period; however, only 50% of swimmers adhered to this recommendation. Resultantly, a winter decline in 25(OH)D was observed in non-supplementing swimmers (79.6 ± 25.2 to 52.6 ± 15.1 nmol·L-1, p = 0.005), with swimmers either displaying an ‘insufficient’ (60%) or ‘deficient’ (40%) vitamin D status. In comparison, greater maintenance of 25(OH)D occurred in supplementing swimmers (92.0 ± 25.5 to 97.2 ± 38.3 nmol·L-1, p = 0.544), although variable outcomes occurred at the individual level (four increased, three maintained, three declined). These findings highlight possible risks of vitamin D insufficiency during the winter for swimmers in the UK, possibly requiring standardised supplement practices. Moreover, alternative educational strategies may be required for swimmers to transfer knowledge to practice in order to improve supplement adherence in future.

Access to nasopharyngeal swabs for sampling remain a bottleneck in some regions for COVID-19 testing. This study develops a distributed manufacturing solution using only an open source manufacturing tool chain consisting of two types of open source 3-D printing and batch UV curing, and provides a parametric fully free design of a nasopharyngeal swab. The swab was designed using parametric OpenSCAD in two components (a head with engineered break point and various handles), which has several advantages: i) minimizing print time on relatively slow SLA printers, ii) enabling the use of smaller print volume open source SLA printers, iii) reducing the amount of relatively expensive UV resin, and iv) enabling production of handle on more accessible material extrusion 3-D printers. A modular open source UV LED box was designed, fabricated for $45 and tested for batch curing. Swabs can be fabricated for $0.06-$0.12/swab. The results of the mechanical validation tests showed that the swabs could withstand greater forces than would be expected in normal clinical use. The swabs were also able to absorb a significant amounts of synthetic mucus materials and passed abrasion and handling tests. The results show the open source swab are promising candidates for clinical trials.

Babesia species infect a very wide range of mammal hosts across the globe and zoonotic infections are of growing concern. Several species of the Babesia genus infect dogs and some of these cause significant morbidity and mortality. The Apicomplexan parasite resides within the red cell and infections result in direct damage to the host through intra- and extravascular hemolysis. An exuberant inflammatory response by the host to some species of Babesia parasites also result in significant collateral damage to the host. Canine infections have been the subject of much study as the wellbeing of these companion animals is increasingly threatened by the spread of tick vectors and an increasingly mobile dog population. There are no widely available and effective vaccines and effective treatment can be challenging. Understanding disease pathogenesis underlies the development of new treatments. The varying pathogenicity of the various Babesia parasite species that infect dogs offers an opportunity to explore the molecular basis for the wide range of disease caused by infection with this parasite genus. In this review we focus on what has been reported about the clinical presentation of Babesia infected dogs in an attempt to compare the severity of disease caused by different Babesia species.

This study focuses on calibrating the linear Drucker-Prager yield criterion for polypropylene under multiaxial loading conditions, using the Arcana machine to achieve a wide range of triaxiality states. The Drucker-Prager criterion has been adapted for polymers, composites, and metals due to its ability to account for the influence of hydrostatic pressure on yield stress. This study employs the Arcana machine, which allows for testing flat plate samples under various angles, thereby simulating different stress states from pure shear to biaxial tension. Additionally, uniaxial compression tests were conducted to extend the range of triaxiality. The material used in this study is Sabic 83MF10, a polypropylene polymer. Samples were prepared by injection molding and cut to specific dimensions. Tests were performed using a universal testing machine with the Arcana handle, and the results were analyzed to determine the yield strength, pressure, and triaxiality for each sample. The results showed a linear relationship between von Mises stress and hydrostatic pressure, with a friction angle (β) of 20.65° and material cohesion (d) of 27.81. The numerical simulations in Abaqus confirmed the validity of the Drucker-Prager model, accurately reflecting the moment of yielding for the tested samples.

This study investigates by hybrid approach of classical calculations and numerical explicit FEM simulation the strain rate sensitive hardening of Polypropylene Sabic 83MF10 under dynamic tension loads. The Cowper-Symonds model is employed to characterize the non-linear increase in yield strength with strain rate, within the range of 0,01 to 1 [1⁄s]. For lower strain rates, a drastic decrease in yield strength is observed, suggesting the significant influence of creep and relaxation phenomena. The study proposes further research incorporating viscoelastic properties for a more comprehensive material model. Additionally, the study observes a disproportionate increase in yield strength for samples with smaller radius, indicating a dependency on triaxiality which suggests further research on the Drucker-Prager model for this material. The study concludes by recommending a broader range of input parameters for future studies, including the Johnson-Cook model and comparison of tensile test results with compression test results.

This article raise a topic of critical examination of polypropylene, a key polymeric material, and its extensive application within the automotive industry, particularly focusing on the manufacturing of brake fluid reservoirs. The study aims to enhance the understanding of polypropylene's behavior under mechanical stresses through a series of laboratory destruction tests and numerical simulations, emphasizing the Finite Element Method (FEM). A novel aspect of this research is the introduction of the PEAK parameter, a groundbreaking approach designed to assess the material's resilience against varying states of strain, known as triaxiality. This parameter facilitates the identification of critical areas prone to crack initiation, thereby enabling the optimization of component design with a minimized safety margin, which is crucial for cost-effective production. The methodology involves conducting burst tests to locate crack initiation sites, followed by FEM simulations to determine the PEAK threshold value for the Sabic 83MF10 polypropylene material. The study successfully validates the predictive capability of the PEAK parameter, demonstrating a high correlation between simulated results and actual laboratory tests. This validation underscores the potential of the PEAK parameter as a predictive tool for enhancing the reliability and safety of polypropylene automotive components. The research presented in this article contributes significantly to the field of material science and engineering by providing a deeper insight into the mechanical behavior of polypropylene and introducing an effective tool for predicting crack initiation in automotive components. The findings hold promise for advancing the design and manufacturing processes in the automotive industry, with potential applications extending to other sectors.

To stabilize the Earth’s climate a large-scale transition is needed to non-carbon emitting renewable energy technologies like wind and solar energy. Although these renewable energy sources are now lower-cost than fossil fuels, their inherent intermittency make them unable to supply a constant load without storage. To address these challenges rechargeable electric batteries are currently the most promising option; however, their high capital costs limit current deployment velocities. To both reduce the cost as well as improve performance 3D printing technology has emerged as a promising solution. This literature review provides the state-of-the-art enhancements of battery properties with 3D printing including efficiency, mechanical stability, energy and power density, customizability and sizing, production process efficiency, material conservation and environmental sustainability as well as the progress in solid-state batteries. The principles, advantages, limitations, and recent advancements associated with the most common types of 3D printing are reviewed focusing on their contributions to the battery field. 3D printing batteries offer design flexibility, material flexibility, reduces pack weight, minimizes material waste, increases the range of applications and has the potential to reduce costs. As 3D printing technologies become more accessible, the prospect of cost-effective production for customized batteries is extremely promising.

This study addresses the motivations behind Generation Z's attendance at conferences and aims to contribute to a better understanding of their conference participation behavior. The study identified six latent factors that influence conference attendance motivation: Green and Digital Conference Experience, Educational and professional opportunities, Conference costs, Destination and conference stimuli, Stimulating factors, and Conference accessibility. These factors align with Generation Z's unique characteristics and preferences, such as their environmental consciousness, reliance on digital technologies, desire for continuous learning, career advancement, and experiences. The study also found that destination characteristics and educational and professional opportunities are significant motivators for Generation Z's conference attendance across different cultural contexts. Additionally, Generation Z's strong interest in sustainability and financial challenges highlights the need for eco-friendly practices and affordable registration fees to make conferences more appealing and accessible. The study further explores the impact of socio-demographic characteristics, revealing the gender and past conference attendance differences in motivation. Finally, the study discusses the implications for the conference industry and suggests areas for future research to enhance the understanding of conference attendance motivation among Generation Z.

In an era characterized by a move towards a “knowledge society”, universities are central in fostering “knowledgeability”, that is the reflexive understanding of knowledge in knowledge societies. The objective of “knowledgeability” can be met through creating a stronger link between education and research. Furthermore, overall student performance, for example in critical thinking and problem solving, can be improved if research-related activities are incorporated into the curriculum. The aim of this paper is to use inter-national examples to discuss the research- education nexus from four different perspectives, namely context, policy, im- plementation and quality, with case studies from higher education institutions in Singapore and Sweden. We suggest that different integrative technologies can be used to enhance the links, but it will be essential to consider the inputs of training, service and support in using new technology. Interestingly, the act of evaluating the link between edu- cation and research will increase awareness of this linkage by stakeholders involved in both education and research. In turn the link can be strengthened, contributing to increased quality in both education and research.

Microarray gene expression analysis is a powerful technique used in cancer classification and research to identify and understand gene expression patterns that can differentiate between different cancer types, subtypes, and stages. However, microarray databases are highly redundant, inherently nonlinear, and noisy. Therefore, extracting meaningful information from such a huge database is a challenging one. The paper adopts the Fast Fourier Transform (FFT) and Mixture Model (MM) for dimensionality reduction and utilizes the Dragonfly optimization algorithm as the feature selection technique. The classifiers employed in this research are Nonlinear Regression, Naïve Bayes, Decision Tree, Random Forest and SVM (RBF). The classifiers' performances are analyzed with and without feature selection methods. Finally, Adaptive Moment Estimation (Adam) and Random Adaptive Moment Estimation (RanAdam) hyper-parameter tuning techniques are used as improvisation techniques for classifiers. The SVM (RBF) classifier with the Fast Fourier Transform Dimensionality Reduction method and Dragonfly feature selection achieved the highest accuracy of 98.343% with RanAdam hyperparameter tuning compared to other classifiers.

The subfamily Picobiinae (Acariformes: Syringophilidae) comprises obligate and permanent parasites of birds found exclusively in the quills of contour feathers. In this paper, we studied associations of picobiine mites with birds of the family Sturnidae (Aves: Passeriformes). Among the 414 examined bird individuals belonging to 44 species (35.2% of all sturnids), 103 individuals from 24 species (54.5% of examined species) were parasitised by quill mites. The diversity of mites was represented by five species, including one newly described, Picobia malayi Patan and Skoracki sp. n. Statistical analysis of the Picobiinae-Sturnidae bipartite network demonstrated a low connectance value (Con = 0.20) and high modularity, with significant differences in the H2' specialisation index compared to null model values. The network structure, characterised by four distinct modules, highlighted the specificity and narrow oligoxenous to mesostenoxenous nature of the mite-host associations. The distribution of Picobia species was congruent with the phylogeny of their starling hosts, with different mites parasitising specific clades of starlings. The findings suggest that the social and breeding behaviours of starlings influence quite a high prevalence. Finally, our studies support the validity of museum collections to study these parasitic interactions.

The application of smartphone-based color evaluation of passive sampling devices for gases has only been sparsely reported. The present review aims to compile available publications with respect to the configuration of the passive samplers, conditions of smartphone photographing, analytical procedure for color detection and quantification (including calibration processes), and their application to different target gases. The performance of the methods - whenever available - is presented regarding the analytical specifications selectivity, sensitivity, and limit of detection in comparison with other color evaluation methods of passive samplers. Practical aspects like requirements of instrumentation and ease of use will be outlined in view of the potential employment in education and citizen science projects. In one section of the review the inconsistent terminology of passive and diffusive sampling is discussed in order to clarify the distinction of information obtained from the uptake of the passive samplers between gas-phase concentration and the accumulated deposition flux of gaseous analytes. Colorimetric gas sensors are included in the review when applied in passive sampling configurations and evaluation is performed with smartphone-based color evaluation. Differences in the analytical procedures employed after the passive sampling step and prior to the detection of the colored compounds are also presented.

Tourmalines are a group of minerals which may concentrate various accessory components, e.g. Cu, Ni, Zn, Bi, Ti, Sn. The paper presents fluor-elbaite and elbaite from a dyke of the Julianna pegmatitic system at Piława Górna, at the NE margin of the Bohemian Massif, SW Poland, containing up to 6.32 and 7.37 wt.% ZnO, respectively. Such high amounts of ZnO are almost two times higher than in the second most Zn-enriched tourmaline known to date. The compositions of the Zn-rich tourmalines from Piława Górna, studied by electron microprobe and Raman spectroscopy, correspond to the formulae: (Na0.73Ca0.01•0.25)Σ1(Al1.03Li0.79Zn0.76Fe2+0.33Mn0.09)Σ3Al6B3Si6O27(OH)3(F0.66OH0.34), and (Na0.78Ca0.01•0.21)Σ1(Al1.06Li0.87Zn0.88Fe2+0.10Mn0.09)Σ3Al6B3Si6O27(OH)3(OH0.84F0.16), respectively, with Zn as one of the main octahedral occupants. A comparison with other tourmalines and associated Zn-rich fluor-elbaite and elbaite from the pegmatite indicates that atypically high Zn-enrichment is not a result of Zn-Fe fractionation, but dissolution and reprecipitation induced by a late (Na,Li,B,F)-bearing fluid within the assemblage of gahnite spinel and primary schorl-type tourmaline. This strongly suggests Na-Li-B-F metasomatism of gahnite-bearing mineral assemblages as that is the only environment that can promote crystallization of a hypothetical Zn-dominant tourmaline. The compositions of the Zn-rich fluor-elbaite and elbaite suggest three possible end-members for such a hypothetical tourmaline species: NaZn3Al6B3Si6O27(OH)3(OH), •(Zn2Al)Al6B3Si6O27(OH)3(OH) and Na(Zn2Al)Al6B3Si6O27(OH)3O.

D-dimer testing in combination with clinical assessment is commonly used to diagnose suspected DVT and pulmonary embolism. However, as D-dimer levels are physiologically higher in elderly patients, this test loses clinical specificity in the setting of geriatric patients. The aim of our study was to investigate the changes in D-dimer levels with age and the specificity of the D-dimer test in the diagnosis of pulmonary embolism. 1617 elderly patients consecutively admitted to the Geriatric Emergency Care Department of the INRCA-IRCCS hospital between January 2013 and February 2014 and for whom D-dimer results were available were included. The D-dimer immunoturbidimetric assay was performed on a cs-2100i Sysmex Siemens using a conventional cut-off level of 500 µg/L. The median D-dimer level was 1200 [550-2990] µg/L FEU, and the percentage of patients with D-dimer levels below the conventional cut-off was only 22.1%. As expected, there was a significant age-related increase in D-dimer, even when sex was considered, and a significant decrease in the specificity of D-dimer assay with age. The most established use of D-dimer testing is in the diagnosis of deep vein thrombosis or pulmonary embolism. Our study confirms the need for an age-adjusted cut-off for D-dimer testing in geriatric patients.

Ship detection from synthetic aperture radar (SAR) imagery is crucial for various fields in real-world applications. Numerous deep learning-based detectors have been investigated for SAR ship detection, which require a substantial amount of labeled data for training. However, SAR data annotation is time-consuming and demands specialized expertise, resulting in that deep learning-based SAR ship detectors struggle due to a lack of annotations. With limited labeled data, semi-supervised learning is a popular approach for boosting detection performance by excavating valuable information from unlabeled data. In this paper, a semi-supervised SAR ship detection network is proposed, termed as Multi-Teacher Dempster-Shafer Evidence Fusion Net-work (MTDSEFN). The MTDSEFN is an enhanced framework based on the basic teacher-student skeleton frame, comprising two branches: the Teacher Group (TG) and the Agency Teacher (AT). The TG utilizes multiple teachers to generate pseudo-labels for different augmentation versions of unlabeled samples, which are then refined to obtain high-quality pseudo-labels by using Dempster-Shafer (D-S) fusion. The AT not only serves to deliver weights of its own teacher to the TG at the end of each epoch, but also updates its own weights after each iteration, enabling the model to effectively learn rich information from unlabeled data. The combination of TG and AT guarantees both reliable pseudo-label generation and learning comprehensive diversity information from numerous unlabeled samples. Extensive experiments were performed on two public SAR ship datasets, and the results demonstrated the effectiveness and superiority of the proposed approach.

A traditionally salient topic of empirical investigation in the sociology of religion, this paper seeks to offer a recent investigation into the intergenerational transmission of religion and the parental forms of religious engagement that predict adult engagement with religion. The study of this paper explores the intergenerational transmission of religion, focusing on the parental forms of religious identity and engagement that influence religious identity, beliefs, and practices in adulthood. By analyzing the 2018 GSS dataset in the United States with multiple regression analyses, I find strong parental and childhood influences on adult religiosity, religious service attendance, and belief in God. Indeed, this engagement often mirrors parental engagement for these variables. However, while paternal religious identity often predicts these religious variables, I find that the religious identity and engagement of parents generally does not predict religious identity in adulthood. Ultimately, while these results generally show strong predictive mechanisms of intergenerational transmission, they also illustrate that these relationships are variably dependent on the form of parental and adult religious engagement and which parent participates or is associated with that engagement.

The primary objective of this study was to demonstrate the potential of digital image analysis as a tool to identify microplastic (MP) particles in surface waters and to facilitate their characterisation in terms of 2D and 3D morphology. Digital image analysis preceded by microscopic analysis was used for an exhaustive quantitative and qualitative evaluation of MPs isolated from the Vistula river. Using image processing procedures, 2D and 3D shape descriptors were determined. The Principal Components Analysis (PCA) was used to interpret the relationships between the parameters studied, characterising MP particle geometry, type and colour. This multivariate analysis of the data allowed 3 or 4 main factors to be extracted, explaining approximately 90% of the variation in the data characterising MP morphology. It was found that the first principal component for granules, flakes and films was largely represented by strongly correlated with 2D shape descriptors (area, perimeter, equivalent area diameter) and 3D shape descriptors (CSF, Compactness, Dimensionality). Considering the scraps, PC1 was represented by only five of the above descriptors, and the Compactness variable had the largest contribution to PC2. In addition, for granules, flakes and films, a relationship between 2D shape and the colour of their particles could be observed. For the most numerous MP group identified of multicoloured scraps, no such association was found. The results of our study can be used for further multivariate analysis regarding the presence of microplastic floating on the river surface, with a particular focus on particles of secondary origin. This is of key importance for optimising future efforts in conducting small-scale and multidimensional monitoring of and reducing plastics in the aquatic environment.

(1) Background: The purpose of this study is to evaluate the full arch scan accuracy (precision and trueness) of nine digital intra-oral scanners and four lab scanners. Previous studies have compared the accuracy of some intra-oral scanners, but as this is a field of quickly developing technologies, a more up-to-date study was needed to assess the capabilities of currently available models.; (2) Methods: The present in vitro study compared nine different intraoral scanners (Omnicam 4.6; Omnicam 5.1; Primescan; CS 3600; Trios 3; Trios 4; Runyes; i500 and DL206) as well as four lab light scanners (Einscan SE; 300e; E2 and Ineos X5) to investigate the accuracy of each scanner by examining the overall trueness and precision. Ten aligned and cut scans from each of the intra-oral and lab scanners in the in vitro study were brought into CloudCompare. A comparison was made with the master STL using the CloudCompare 3D analysis best-fit algorithm. The results were recorded along with individual standard deviation and a colorimetric map of the deviation across the surface of the STL mesh; a comparison was made to the master STL, quantified at specific points. ; (3) Results: In the present study, the Primescan had the best overall trueness (17.3 ± 4.9). Followed by (in order of increasing deviation) the Trios 4 (20.8 ± 6.2), i500 (25.2 ± 7.3), CS3600 (26.9 ± 15.9), Trios 3 (27.7 ± 6.8), Runyes (47.2 ± 5.4), Omnicam 5.1 (55.1 ± 9.5), Omnicam 4.6 (57.5 ± 3.2) and Launca DL206 (58.5 ± 22.0). Regarding the lab light scanners, the Ineos X5 had the best overall trueness with (0.0 ± 1.9). Followed by (in order of increasing deviation) the 3Shape E2 (3.6 ± 2.2), Up3D 300E (12.8 ± 2.7), and Einscan SE (14.9 ± 9.5); (4) Conclusions: This study confirms that all current generations of intra-oral digital scanners can capture a reliable, reproducible full arch scan in dentate patients. Out of the intra-oral scanners tested, no scanner produced results significantly similar in trueness to the Ineos X5. However, the Primescan was the only one to be statistically of a similar level of trueness to the 3Shape E2 lab scanner. All scanners in the study had mean trueness of under 60-micron deviation. While this study can compare the scanning accuracy of this sample in a dentate arch, the scanning of a fully edentulous arch is more challenging. The accuracy of these scanners in edentulous cases should be examined in further studies.

The nuclear hormone family of receptors regulates gene expression. The androgen receptor (AR) shuttles upon ligand binding and homodimerization from the cytosol into the nucleus to activate gene expression. Thyroid hormone receptors(TR), retinoic acid receptors (RAR), and the vitamin D receptor (VDR) are present in the nucleus bound to chromatin as a heterodimer with the retinoid X receptors (RXR) and repress gene expression. Ligand binding leads to transcription activation. The hormonal ligands for these receptors play crucial roles to ensure the proper conduct of very many tissues and exert effects on prostate cancer (PCa) cells. Androgens support PCa proliferation and deprivation alone or with chemotherapy is the standard therapy for PCa. RAR activation and 3,5,3'-triiodo-L-thyronine (T3) stimulation of TR support the growth of PCa cells. Ligand stimulation of VDR drives growth arrest, differentiation, and apoptosis of PCa cells. Often these receptors are explored as separate avenues to find treatments for PCa and other cancers. However, there is accumulating evidence to support receptor interactions and crosstalk of regulatory events whereby a better understanding might lead to new combinatorial treatments.

Currently Single Board Computers (SBCs) are sufficiently powerful to run Real-Time Operating Systems (RTOSs) and applications with real-time attributes and requirements. SBCs serve as a foundation in Industrial Internet of Things (IIoT). The NXP Semiconductors produces a series of SBCs based on ARM-processors for a variety of industrial applications. The continuous increase in real-time data generated by IoT devices adds further research issues about the efficiency of such systems and applications. The purpose of this research was to investigate the timing performance of an NXP TWR-K70F120M device with μClinux OS on running concurrently tasks with real-time features and constraints. A custom-built multithreaded application with specific compute-intensive sorting and matrix operations was developed and applied to obtain measurements in specific timing metrics, including task’s execution time, threads waiting time, and response time, under different threads variations. The performance of this device was additionally benchmarked and validated against favorite platforms, a Raspberry Pi4 and BeagleBone AI SBCs. The experimental results showed that this device stands well both in terms of timing and efficiency metrics. Execution times were quite lower than the others, by approximately 56% in the case of two threads, and by 29% in the case of thirty-two threads configurations.

For very first time, we report the synthesis of 8-(2-methoxyphenyl)-6-methyl-2-(1-methyl-1H-benzo[d]imidazol-2-yl)quinoline 1. This was achieved in several steps, including usage of Suzuki reaction for functionalization of 2-(1H-benzo[d]imidazol-2-yl)quinoline moiety. The new compound exhibits blue fluorescence. Its structure was confirmed with 1D- and 2D-NMR spectroscopy, IR-spectroscopy, high-resolution mass spectrometry and X-ray analysis.

This research aims to apply Artificial Intelligence (AI) methods, specifically Artificial Immune Systems (AIS), to design an optimal control strategy for a multivariable control plant. Two specific industrial control approaches are investigated: I-PD (Integral-Proportional Derivative) and PI-D (Proportional-Integral Derivative) control. The motivation for using these variations of PID controllers is that they are functionally implemented in modern industrial controllers, where they provide precise process control. The research results in a novel solution to the control synthesis problem for the industrial system. In particular, the research deals with the synthesis of I-P control for a two-loop system in the technological process of a distillation column. This synthesis is carried out using the AIS algorithm, which is the first application of this technique in this specific context. Methodological approaches are proposed to improve the performance of industrial multivariable control systems by effectively using optimization algorithms and establishing modified quality criteria. The numerical performance index ISE justifies the effectiveness of the AIS-based controllers in comparison with conventional PID controllers (ISE₁ = 1.865, ISE₂ = 1.56). The problem of synthesis of the multi-input multi-output (MIMO) control system is solved, considering the interconnections due to the decoupling procedure.

This is a single tertiary center in southwest Romania, population-based, study. We retrospectively compared data obtained in two periods: January 2008 - December 2013 and January 2018 - De-cember 2023, respectively. The global incidence of transposition of great arteries (TGA) - the ter-minated cases added to the ones resulting in live-born pregnancies, remained almost constant. The live-born incidence of TGA decreased (0.34% to 0.013%). The prenatal detection rate increased slightly (71.42% to 87.5%). The median gestational age at the diagnosis decreased, from 29.3 ges-tational weeks (mean 25.4) to 13.4 weeks (mean 17.2). The proportion of terminated pregnancies significantly increased (14.28% to 75%, p = 0.019).

Quill mites of the family Syringophilidae are widely distributed parasites of birds inhabiting the interior of feather quills. In this paper, we provide detailed information on the host spectrum and distribution for six previously described species of syringophilines associated with starlings with new host and locality records. Additionally, we describe three new species, Aulonastus indonesianus Marcisova, Skoracki and Patan sp. n. from the Common Hill Myna Gracula religiosa Linnaeus in Indonesia (Java) and the White-necked Myna Streptocitta albicollis (Vieillot) in Indonesia (Celebes), Aulonastus anais Skoracki and Patan sp. n. from the Golden Myna Mino anais (Lesson) in Papua New Guinea, and Syringophiloidus poeopterus Skoracki and Patan sp. n. from the Abbott's Starling Poeoptera femoralis (Richmond) in Tanzania. Finally, we explore the host-parasite interactions within the system comprising starlings and syringophiline mites.

AI advances integrate generative design tools in architecture, providing architects with sophisticated design options. It enables the creation of intricate, high-performing projects by exploring diverse design possibilities with AI and algorithms. Generative AI and generative design empower architects to create better-performing, sustainable, and efficient design solutions and explore diverse design possibilities. This paper leverages multimodal generative AI to enhance design creativity by combining textual and visual inputs. Blockchain technology converts design metadata into NFTs, ensuring secure, authentic, and traceable data storage. The framework addresses data ownership, legal adherence, and client-architect collaboration and is entirely scalable for digital design authentication. This research exemplifies the pragmatic fusion of Generative AI and blockchain technology applied in architectural design for more transparent, secure, and effective results. This study provides a strategy that uses generative AI technologies to achieve an efficient and creative workflow in the early stages of architectural design.

Introduction: The term 3D printing is commonly used to depict an assembling method whereby the final form of an object is the result of the addition of different layers to build the frame of an object. This procedure is more accurately portrayed as additive manufacturing and is likewise alluded to as fast prototyping. The term 3D printing, in any case, is generally new and has been an active part of current developments in Dentistry. Much publicity encompasses the evolution of 3D printing, which is hailed as an innovation that will perpetually change CAM manufacturing, including in the dental sector. This review is the first part in a 3D Printing series that looks at the history of 3D Printing, the technologies available and reviews the literature relating to the accuracy of these technologies. Conclusions: The recent advancement in digital dentistry to incorporate these tools has modernised dental practices by paving the way for computer-aided design (CAD) technology and rapid prototyping. The use of 3D printing has led to 3D digital models produced with intraoral scanners (IOS), which can be manipulated easily for diagnosis, treatment planning, mockups, and a multitude of other uses. Combining 3D Printing with a 3D intraoral scan eliminates the need for physical storage but makes it to retrieve a 3D models for use within all dental modalities.

The information on the land use and soil conservation practice based on year 2006, 2010 and 2014, hence offering an opportunity to model the impacts of land use change on erosion, deposition and surface water runoff. Limitation in the use of hydrological models had been their inability to handle the large amount of input data that describe the heterogeneity of the natural system. In this study, a procedure that takes into account soil conservation practice based on the land use change, the response of soil erosion and sediment export from the George Town Conurbation catchment area, and average annual sediment yields were estimated for each grid cell of the watershed to identify the critical erosion areas of rural and urban planning proposes. Average annual sediment yield and data on a grid basis estimated using Universal Soil Loss Equation (USLE) and an emerging technology represented by Geographic Information System (GIS) used as a tool to produce a map for erosion rate. The changing of the land use from forest to agriculture and then to an urban area is a challenging task to research on land use demand for population, and environmental impact assessment is important for the planning of natural resources management, allowing research the modification of land use properly and implement more sustainable for long term management strategies. The challenge is to formulate strategies that would promote an integrated approach to the land use planning at an appropriate level as to address the issues that arose. Modelling for creating urban growth boundary for the George Town Conurbation must have to be controlled surface runoff and soil loss and sediment export from land use of the George Town Conurbation catchment.

Recent studies have demonstrated a relationship between poor vitamin D status and respiratory infections and diarrhea among young children. Acute lower respiratory infections (ALRI) and diarrhea are among the two most important causes of death in under-5 children. In this analysis, we examine the extent to which vitamin-D deficiency (<10 ng/ml) predicts these outcomes using data from a randomized controlled trial (RCT) of daily folic acid and/ or vitamin B12 supplementation for six months in 6 to 30 months old children conducted in Delhi, India. Of the 960 subjects who had vitamin-D concentrations measured, 331(34.5%) were vitamin-D deficient. We found, after controlling for relevant potential confounders (age, sex, breastfeeding status, wasting, stunting, underweight, anemia status at base line and season), the risk of ALRI was significantly higher among vitamin-D deficient (OR 1.26; 95% CI: 1.03 to 1.55) compared to vitamin-D-replete children in the six months follow-up period. Vitamin-D status was not significantly associated with episodes of diarrhea and clinical pneumonia. The extent of causal relationship of vitamin-D status and ALRI needs to be explored in further studies.

Over the last decades, in addition to the improvement of pathophysiological knowledge regarding the role and mechanisms of action of Vitamin D, there has been a progressive advancement in analytical technologies for its determination, as well as in methodological standardization. A significant number of scientific works, meta-analyses, and guidelines have been published on the importance of Vitamin D and the need for supplementation in deficient individuals. However, it appears necessary to clarify the fundamental elements related to the determination of Vitamin D (both at the strictly analytical and post-analytical levels) and the scientific evidence related to the efficacy/safety of supplementation. Additionally, given the important interrelations between Vitamin D, parathyroid hormone (PTH), and fibroblast growth factor-23 (FGF23), the analytical issues and clinical utility of these biomarkers will be discussed.

Although vitamin D deficiency has been correlated with an increased risk of cardiovascular disease (CVD), there are few data on the association between 25-hydroxyvitamin D (25(OH) D) and atherogenic indices predictive of CVD. This study aimed to investigate the relationship of vitamin D status with lipid profile and atherogenic indices in adult women in Morocco. Three hundred healthy women, aged 18 to 50 years, from Meknes were included. Fasting 25(OH) D and lipid concentrations were determined using a one-step electrochemiluminescence-based immunoassay and an enzymatic method, respectively. Atherogenic indices (Atherogenic index of plasma (AIP), non-HDL cholesterol (Non-HDL-C), Atherogenic coefficient (AC), Castelli risk indices I and II (CRI-I and II), and CHOLIndex (CI)) were calculated using conventional lipid parameters. Logistic regression models and operating characteristic curve (ROC) analysis were used to assess the relationship of the variables and estimate the threshold of 25(OH) D levels associated with high atherogenic indices. 25(OH) D below 20 ng/ml was significantly associated with an enhanced risk of hypertriglyceridemia and elevated values of AIP, AC, Non-HDL-C, and CRI-I with an OR (95% CI) of 4.904 (1.856-12.959); 3.637(2.149-6.158); 3.589(1.673-7.700); 2.074(1.215-3.540), and 2.481(1.481-4.123), respectively. According to ROC analysis, the likelihood of hypertriglyceridemia and high values of AIP, AC, Non-HDL-C, and CRI-I were associated with 25(OH)D thresholds ≤15.15 ng/ml, ≤ 17.5 ng/ml, ≤ 19.8 ng/ml, ≤ 20.1 ng/ml and ≤ 19.5 ng/ml, respectively, all p &lt; 0.01. Based on atherogenic indices, this study indicates that vitamin D below 20 ng/ml may increase the risk of cardiovascular disease in adult women. Additional health efforts are needed to raise awareness among women and healthcare providers in preventing and controlling cardiovascular risk factors.

This paper examines hybrid threats to maritime transportation systems, and their governance re-sponses; focusing on the congested Straits of Malacca and Singapore (SOMS) as an illustrative case study. The methodology combines secondary sources with primary data from 42 expert in-terviews, a 30-respondent survey, and two maritime security roundtables. Key findings were that ships’ critical systems are increasingly interconnected, yet aging IT infrastructure and minimal cybersecurity awareness among crews heighten risks. Meanwhile, regional terrorist groups have previously targeted shipping and shown considerable skill in exploiting online tools, aligning with broader calls for jihadist violence. Further, opportunistic piracy persists in the SOMS with the po-tential to disrupt shipping. Experts confirmed maritime cybersecurity lags other critical infra-structure sectors and needs updated governance. Initial International Maritime Organization (IMO) guidelines lack specificity but revisions and updated IMO guidance are in process, while Port state implementation of maritime cybersecurity standards varies. Crucially, information sharing remains inadequate, even as recorded attacks increase. Findings underscore that although major hybrid incidents have not occurred, simulations and threat actors’ capabilities demonstrate potential for catastrophic collisions or cascading disruption in congested waterways. Mitigating factors like redundancy and crew training are deficient currently. Some alignment between SOMS states on maritime security cooperation exists, but not cyber threats specifically. Key recommen-dations include an anonymous cyber-attack reporting system, reinforced training and shipboard systems, and consolidated regional frameworks. Until these priorities are addressed, the analysis concludes that hybrid vulnerabilities in this vital global chokepoint remain a serious concern.

The access to agricultural information in Sudan continues to be challenging to farmers due to use of inadequate sources and traditional extension approaches. The rapid growth of smart-mobile phones usage in developing countries resulted in several advantages compared to other alternatives in term of costs, geographic coverage and ease of use. This research was conducted in North Kordofan Sate to explore the role of smart-mobile phone in accessing agricultural information. Primary data were obtained by structured questionnaires and focus group discussion through participatory rural appraisal and observation while secondary data were collected from scientific journals, books and authenticated web sources. A number of 230 respondents (10% from total farmers) were interviewed and five focus group discussions were done. Statistical Packages for Social Science (SPSS) version 22 was used to analyze the data with aid of descriptive statistics and Chi-squire Test. The result indicated that most of the respondents fall in age group between 21-40 years, and they depend on farm activity. There was 90% of farmers processed mobile phone since more than three years ago, 90.8%continuedto use smart mobile phone to access agricultural information and showed positive contribution towards income generation. The results also revealed that there was positive perception towards using mobile phones which showed more efficient in use than radio and TVs. The results showed great advantages of using smart mobile phone where 75.2 % of respondents preferred to get agricultural information, logistics and other needs through successful communication in the mid of agricultural season. Results of Chi-squire test showed significant differences between the parameters tested. The study recommended that farmers should be connected with mobile phones to admit ease communication with agricultural extension offices and quick access to their needs and logistics.

Hashimoto's thyroiditis (HT) is essentially featured by self-tissue destruction by means of the adaptive immune responses that evade immune regulation. Vitamin D carries out an immunomodulatory role that appears to promote immune tolerance. The aim of this study is to elaborate a narrative review about the relationship between vitamin D status and HT and the role of vitamin D supplementation to reduce HT risk by modulating the immune system. There is an extensive literature confirming that vitamin D levels are significantly lower in HT patients compared to healthy people. On the other hand, after the supplementation with cholecalciferol in patients with HT and vitamin D deficiency, thyroid autoantibody titer decreased significantly, However, there are no conclusive results on the effect of vitamin D supplementation on the thyroid function. The confirmation of the beneficial effects of vitamin D in the prevention and treatment of autoimmune thyroid diseases require additional randomized, double-blind, placebo-controlled trials with longer follow-up.

This paper aims to demonstrate that, beyond the small world of Riemann-Liouville and Caputo derivatives, there is a vast and rich world with many derivatives suitable for specific problems and various theoretical frameworks to develop, corresponding to the different paths taken. Notions of time and scale sequences are introduced and general associated basic derivatives, namely right/stretching and left/shrinking, are defined. A general framework for fractional derivative definitions is reviewed and applied to get both known and new fractional order derivatives. Several fractional derivatives are considered, mainly: Liouville, Hadamard, Euler, bilinear, tempered, q-derivative, and Hahn.

This research focusing on the environmental impact of tire and brake pad wear constitutes a significant area of transport-related studies. These two key vehicle components are not only the most frequently worn, but also generate micro and nano pollutants (i.e., rubber, metal oxides) that potentially harm the environment. Over half of the globally produced natural and synthetic rubbers, which amounted to about 30 million tons in 2022, are used for tire production. According to Wagner et al.'s research, over 1.3 million tons of such particles are released due to wear and tear in the European Union alone. This work focuses on examining snow deposits from various locations in an urban agglomeration (Poznan, Poland) in the winter season. FT-IR and NMR spectroscopic studies, optical and electron scanning microscopy SEM-EDS, and particle size studies using the DLS technique were conducted for a detailed characterization of pollutants in the environment. The conducted particle separation methods allowed for the extraction of a fraction mainly containing gum residues with particle sizes less than 2 µm. The results of these studies are crucial for understanding the impact of vehicle part exploitation on the environment.

Blood has certain significant physical properties, which the authors investigated. This paper provides values of surface tension and viscosity of blood at 37 °C, as well as relationship between them plotted on a cross-plot. By applying Hagen- Poiseuille equation and Jurin's law to the experimentally obtained data, the authors calculated with great accuracy viscosity and surface tension of blood. Evaluating both of the properties using described methods required from the authors to know the density of investigated liquid, which was found to be on average $\rho=1063,56 \frac{kg}{m^3}$. The authors took blood samples from 30 healthy subjects and determined aforementioned physical properties. There has been made a distinction in regard of a sex of the blood donor. Results indicate that both surface tension and viscosity are independent from sex of a subject, as well as indicate that there is no correlation between viscosity and surface tension of blood at 37\degree C. Average values of surface tension and viscosity were found to be $\sigma=5,241\pm 0,262 \cdot 10^{-2}\frac{J}{m^2}$ and $\eta=3,352\pm0,360 \cdot 10^{-3} Pa \cdot s$, respectively.

Alcoholic liver disease (ALD) develops when the immunotolerant environment of the liver is compromised due to excessive alcohol consumption. ALD progression involves variations in the expression of multiple genes, resulting in liver inflammation and the development of a leaky gut. Molecular mechanism involved for ALD progression is still unclear, and due to that there are currently no FDA-approved drugs available for its treatment. In this study, the protective effects of Graphene oxide nanoparticles (GO) was investigated against ethanol-induced damage in the gut-liver axis in in vitro. GO was synthesized using a modified Hummer's method and characterization was done. Given the general concerns regarding nanoparticle toxicity, assessment of cell viability, lipid accumulation, DNA damage, cell death, and the generation of reactive oxygen species (ROS) were conducted using various techniques. Furthermore, gene expression of pro- and anti-inflammatory cytokines was done using RT-qPCR. The findings revealed that GOs promoted cell viability even against ethanol treatment. Additionally, lipid accumulation significantly decreased when cells were treated with GO alongside ethanol compared to ethanol treatment alone, with similar trends observed for other assays. Gene expression analysis indicated that GO treatment reduced the expression of proinflammatory cytokines while enhancing the expression of antioxidant genes. Moreover, GO treatment led to improvements in gut permeability and a reduction in proinflammatory cytokines in colon cells damaged by ethanol. These findings suggest that GO holds promise as a drug carrier, exhibiting no observed toxic effects. By shedding light on the protective effects of GO against ethanol-induced damage, this study contributes to the burgeoning field of nanoparticle-mediated therapy for ALD.

Phytochemicals have a long and successful history in drug discovery. With recent advancements in analytical techniques and methodologies, discovering bioactive leads from natural compounds has become easier. Computational techniques like molecular docking, QSAR modelling and machine learning, and network pharmacology are among the most promising new tools that allow researchers to make predictions concerning natural products' potential targets, thereby guiding experimental validation efforts. Additionally, approaches like LC-MS or LC-NMR speed up compound identification by streamlining analytical processes. Integrating structural and computational biology aids in lead identification, thus providing invaluable information to understand how phytochemicals interact with potential targets in the body. Emerging computational approach is machine learning involving QSAR modelling and deep neural networks that interrelate phytochemical properties with diverse physiological activities such as antimicrobial or anticancer effects.

Short-range Internet of Things (IoT) sensor nodes operating at 2.4 GHz need to provide ubiquitous wireless sensor networks (WSNs) with energy-efficient, wide-range output power (POUT) and fully integrated on a single chip for wireless body area networks (WBANs) and wireless personal area networks (WPANs) using low-power Bluetooth (BLE) and Zigbee standards. The proposed fully integrated transmitter (TX) utilizes a digitally controllable current-mode class-D (CMCD) power amplifier (PA) with a second harmonic distortion (HD2) suppression to reduce VCO pulling in an integrated system while meeting harmonic limit regulations. The CMCD PA is divided into 7-bit slices that can be reconfigured between differential and single-ended topologies. Duty cycle distortion compensation is performed for HD2 suppression, and an HD2 rejection filter and a modified C-L-C low-pass filter (LPF) reduce HD2 further. Implemented in a 28 nm CMOS process, the TX achieves a wide POUT range of from 12.1 to -31 dBm and provides a maximum efficiency of 39.8% while consuming 41.1 mW at 12.1 dBm POUT. The calibrated HD2 level is -82.2 dBc at 9.93 dBm POUT, resulting in a transmitter figure of merit (TX_FoM) of -97.52 dB. Higher order harmonic levels remain below -41.2 dBm even at 12.1 dBm POUT, meeting regulatory requirements.

Chronic kidney disease (CKD) and cardiovascular disease (CVD) are highly prevalent conditions, each significantly contributing to the global burden of morbidity and mortality. CVD and CKD share a great number of common risk factor, such as hypertension, diabetes, obesity, and smoking among others. Their relationship extends beyond these factors, encompassing intricate interplay between the two systems. Within this complex network of pathophysiological processes, vitamin D has emerged as a potential linchpin, exerting influence over diverse physiological pathways implicated in both CKD and CVD. In recent years, scientific exploration has unveiled a close connection between these two prevalent conditions and vitamin D, a crucial hormone traditionally recognized for its role in bone health. This article aims to provide an extensive review of vitamin D's multifaceted and expanding actions concerning its involvement in CKD and CVD.

Green spaces localized in cities create favourable environmental conditions for Ixodes ricinus, the most widespread and important vector of tick-borne pathogens in Central Europe. In this study, we described the prevalence of Borrelia burgdorferi s.l. and Babesia species found in mono- and double infections among I. ricinus ticks occurring in urban areas of the city of Poznań, west-central Poland. Two tick groups were examined: (i) a group of 1,029 host-seeking ticks (460 nymphs, 289 females, and 280 males and (ii) a group of 1,268 engorged female ticks removed from 1,115 tick-infested animals, dogs and cats. The overall prevalence of B. burgdorferi s.l. found in host-seeking ticks was almost two-fold higher in comparison to ticks derived from pets (8.7 vs. 4.7%, respectively, χ2 test, P = 0.001). Borrelia afzelii and B. garinii were the most prevalent species both in ticks from vegetation (3.7% and 3.7%, respectively) and from pets (3.7% and 0.6%, respectively). Babesia infections were slightly more common in feeding ticks compared to those from vegetation (6.0 vs. 4.7%, respectively), however, the difference was not significant. Three Babesia species including Ba. microti, Ba. venatorum and Ba. canis were identified. Babesia canis and Ba. microti were the most prevalent in host-seeking (2.6% and 1.4%, respectively) and feeding ticks (2.8% and 2.2%, respectively), whereas Ba. venatorum was the rarest piroplasm. All Ba microti obtained sequences (n=42) were identical to Ba. microti genotype "Jena/Germany" that is considered as pathogenic to humans. Furthermore, the sequences of Ba. venatorum (n=17) were identical with those isolated from patients in Italy, Austria and Poland. Altogether, out of 121 Babesia-positive ticks, 19.8% were simultaneously infected with B. burgdorferi s.l. spirochetes. We found similar prevalences of co-infections in host-seeking (1.1%) as well as in feeding ticks (1.0%). In the first group, Ba. canis prevailed in coinfections (73%), mostly with B. afzelii and B. garinii, in the second group, Babesia microti dominated with B. afzelii (92.7%). This is the first finding documenting the co-occurrence of both pathogens in ticks from companion animals. The detection of Ba. microti and Ba. venatorum sequences identical to strains pathogenic to humans as well as predominance of LB spirochetes, B. afzelii and B. garinii in I. ricinus from vegetation and animals indicates that there is a potential risk of acquiring human babesiosis and/or Lyme borreliosis in urban areas of the city of Poznań. Although, the overall risk of encountering a Ba. microti and B. burgdorferi s.l. co-infected tick was low (1.0%), the potential for more severe clinical symptoms and complications deserves notice. A relatively high infection rates of Ba. canis in dog-derived ticks (3.2%) and in host-seeking ticks (2.6%), suggests that I. ricinus could potentially be involved in the circulation of this piroplasm in areas, where the competent vector, Dermacentor reticulatus is absent or rare.

Article explores participant specific study of muscle inherehit dynamics hidden inside the diognostic electromyography (D-EMG) signals during load pull exercises, aiming to uncover underlying patterns and nonlinear behaviors. Employing a multi-step analytical framework, the study first evaluates signal stationarity through Quantile-Quantile (Q-Q) plot and surrogate data analyses, revealing insights into signal stability. Subsequent use of phase space reconstruction techniques exposes intrinsic dynamics within the EMG signals, visualized through Poincar´e maps, elucidating attractor geometry and system dynamics. Histogram analysis further dissects the Poincar´e maps, offering insights into signal behavior relative to physiological processes. Additionally, the study quantifies the largest Lyapunov exponent from the Poincar´e maps, providing a measure of dynamical complexity within the muscle EMG signals during load pull exercises. By integrating these methods, this research sheds light on the nuanced interplay between EMG signals and muscle activity during dynamic exercises, offering valuable insights for rehabilitation strategies.

The paper presents research results on biocomposites made from a combination of extruded apple pomace (EAP) and potato starch (SP). The products were manufactured by hot pressing using a hydraulic press with a mold for producing samples. The prepared biocomposites were subjected to strength tests, surface wettability was determined and color analysis was carried out. Thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and cross section observed in Scanning electron microscope (SEM) were also performed. The obtained test results showed that the combination of apple pomace (EAP) and starch (SP) enabled the production of compact bicomposite materials. At the same time, it was found that each increase in the share of starch in the mixture for producing biocomposites increased the strength parameters of the obtained materials. With the highest share of starch in the mixture, 40%, and a raw material moisture content of 14%, the material had the best strength parameters and was even characterized by hydrophobic properties. It was also found that materials with a high content of starch are characterized by increased temperature resistance. Analysis of SEM microscopic photos showed well-glued particles of apple pomace, pectin, gelatinized starch and a smooth external structure of the samples. Research and analyzes have shown that apple pomace reinforced only with the addition of starch can be a promising raw material for the production of simple, biodegradable biocomposite materials.

Determining the vibration environment is crucial to analyzing a design of any mechanical system, especially such dynamic systems as sounding rockets. Accuracy of measurement using accelerometers could be improved by application of mechanical vibration filtering and amplifying devices. This work presents a theoretical description of a tunable filter and amplifier. Principle of work is provided as well as results from application of the device on a sounding rocket are provided. It is shown that implementation of such devices allowed for enhancing the accuracy of acceleration measurements. Conclusions on future implementations are also provided.

The Planning and implementation of construction projects are difficult processes and are burdened with many risk elements. The budget spread over time, which is developed on the basis of the schedule, presents the expected distribution of costs throughout the duration of the works, which during the implementation of the project is subject to constant changes resulting from time, cost and organizational factors. Managing construction contracts requires managers to be able to analyze on an ongoing basis the variances of production costs - from the values calculated in the offer cost estimate and assumed in the Budgeted Cost of Work Scheduled. The article attempts to analyze the emerging time and cost deviations using proprietary T/S and T/C monitoring, based on simple indicators of the EVM method. An example of construction of a multi-family housing development was used to study the variances of planned and incurred costs.

Aseptic implant loosening after total joint replacement is partially influenced by material-specific factors when cobalt-chromium alloys are used, including osteolysis induced by wear- and corrosion products, and stress shielding. Here, we aim to characterize a hybrid material consisting of alumina-toughened zirconia ceramics (ATZ) and additively manufactured Ti-35Nb-6Ta (TiNbTa), joined by a glass solder. The structure of the joint, static and fatigue shear strength, the influence of accelerated aging, and the cytotoxicity using an elution assay with human osteoblasts is characterized. Furthermore, the biomechanical properties of functional demonstrators of a femoral component for total knee replacements are evaluated. TiNbTa-ATZ specimens showed a homogenous joint with statistical distributed micro-pores and a slight accumulation of Al-rich compounds at the glass solder-TiNbTa interface. The static shear strength was 26.4 ± 4.2 MPa (Ti-ATZ reference: 38.2 ± 14.4 MPa, p = 0.117), all specimens survived 107 cycles of shear loading to 10 MPa, and aging did not reduce the strength. TiNbTa-ATZ did not impair the proliferation and metabolic activity of human osteoblasts. Functional demonstrators of TiNbTa-ATZ provided a maximum bearable extension-flexion moment of 40.7 ± 2.2 Nm. Biomechanical and biological properties of TiNbTa-ATZ demonstrate potential application for endoprosthetic implants.

OPMDs (Oral Potentially Malignant Disorders) are a group of disorders affecting the oral mucosa that are characterized by aberrant cell proliferation and a higher risk of malignant transformation. Vitamin D (VitD) and its receptor (VDR) have been extensively studied for their potential contributions to the prevention and therapeutic management of a range of diseases and neoplastic conditions, including oral cancer. Observational studies suggest correlations between VitD deficiency and higher cancer risk, worse prognosis, and increased mortality rates. Interestingly, emerging data also reveals a link between VitD insufficiency and the onset or progression of OPMDs. Understanding the role of the VitD-VDR axis not only in established oral tumors but also in OPMDs might thus enable early detection and prevention of malignant transformation. With this article, we want to provide an overview of current knowledge about OPMDs and VitD, and investigate their potential association and ramifications for clinical management of OPMDs.

In the present work we revise and extend the Characteristic Crystallographic Element (CCE) norm, an algorithm used to simultaneously detect radial and orientational similarity of computer-generated structures with respect to specific reference crystals and local symmetries. Based on the identification of point group symmetry elements, the CCE descriptor is able to gauge local structure with high precision and finely distinguish between competing morphologies. As test cases we use computer-generated monomeric and polymer systems of spherical particles interacting with the hard-sphere and square-well attractive potentials. We demonstrate that the CCE norm is able to detect and differentiate, between others, among: hexagonal close packed (HCP), face centered cubic (FCC), hexagonal (HEX) and body centered cubic (BCC) crystals as well as non-crystallographic fivefold (FIV) local symmetry in bulk 3-D systems; triangular (TRI), square (SQU) and honeycomb (HON) crystals, as well as pentagonal (PEN) local symmetry in thin films of one-layer thickness (2-D systems). The descriptor is general and can be applied to identify the symmetry elements of any point group for arbitrary atomic or particulate system in two or three dimensions, in the bulk or under confinement.

Rice provides ~20% of human dietary energy and, for many people, a similar share of their protein. Rice cultivation, however, produces significant greenhouse gas (GHG) emissions, comparable to those from the aviation sector. The main GHG from rice production is methane, mostly a result of conventional rice cultivation (CRC) keeping rice fields continuously flooded during the crop cycle. There is extensive evidence that alternate wetting and drying (AWD) of rice fields substantially reduces methane emissions. AWD is one component of the System of Rice Intensification (SRI), an agroecological approach to the management of plants, water, soil and nutrients practiced by millions of farmers in both lowland irrigated rice and upland rainfed cultivation. Thirteen countries have included SRI in their Nationally Determined Contributions to GHG reduction or climate change mitigation. This article reviews 16 field studies of the net reduction in GHG emissions from the adoption of AWD, eight from the adoption of SRI, and two that compared SRI and AWD. Where available, the review includes data on yield and therefore on carbon dioxide-equivalent GHG emissions per kilogram of rice produced. The evidence indicates that AWD and SRI offer a similar and substantial reduction (~35–41%) in GHG emissions per hectare compared with conventional rice cultivation. However, SRI offers ~66% greater yield than CRC, and therefore greater reduction in emissions per kilogram of rice, ~54% more than AWD. The limited data directly comparing SRI and AWD support this finding. SRI also appears to have greater potential to sequester carbon in the soil. SRI lowers rice farmers’ costs of production, adds to their income and can make climate-friendly methods more attractive. Both AWD and SRI are greatly preferable to current conventional practices, but SRI offers opportunities to contribute to food security while directly addressing the drivers of climate change.

This feature study attempts on setting a granules involving mesoscopic matter-aggregation context as a problem of passing locally by the matter-aggregating system from classical stochastic (mesoscopic limit) to a quantum description (nanoscale quantum-size effect limit). A d-dimensional entropy-production aggregation of the granules-involving matter is considered in terms of a (sub)diffusive realization. It turns out that when taking a full d-dimensional pathway of the aggregation toward the nanoscale, one is capable of disclosing a Heisenberg type (diffusional) relation, setting up an upper uncertainty bound for the (sub)diffusive very slow granules-including environment that matches the quantum limit of h/2pm (m– average mass of a granule; h – the Planck’s constant) for the diffusion coefficient of the aggregation, likely first proposed by Fürth in 1933, and qualitatively foreseen by Schrödinger some years before, both in the context of a diffusing particle cluster. The classical-quantum passage uncovered here, also termed insightfully the quantum-size effect (as borrowed from the quantum dots’ parlance), works properly for the three-dimensional (d=3) case, making use of a substantial physical fact that the (nano)granules interact readily via their surfaces with the also granular surroundings in which they are immersed. This natural observation is embodied in the basic averaging construction of the diffusion coefficient of the aggregation of interest. Certain, possibly biomedical, applications of the model can also be viewed by prospective inspection of tiny inhomogeneities in nanofibrillar and/or lamellar matter for which certain numerical realizations are plausible to prepare based on thorough nanoscale experiments.

This paper presents four key results in the philosophy of language. Firstly, it distinguishes between partial and consistent assertion of a sentence, and introduces the concept of an equivocal sentence, which is both partially asserted and partially denied. Secondly, it proposes a novel definition of truth, stating that a true sentence is one that is consistently asserted. This definition avoids the Liar paradox, does not restrict classical logic, and applies to declarative sentences in the language used by any particular person. Thirdly, the paper introduces an epistemic model of language, called assertional language, which formalizes the definition of truth. Finally, it provides an argument for the falsity of so-called Liar sentences. The proposed definition of truth can be viewed as a formal account of the correspondence theory. The epistemic model is a powerful concept that allows for combining different languages in a meaningful way. This model is uniquely capable of reflecting on epistemic inconsistencies, such as logical paradoxes, in a consistent manner and without resorting to non-classical solutions.

This literature review has been compiled to form an evidenced-based review on the standards for Dental Practices in their choice and use of personal protective equipment (PPE) within the COVID-19 Pandemic and beyond: it is prepared on the basis of the current best available evidence. The review encompasses risk management strategies for both Dental Personnel and Patients in the application and use of Face Masks & Respirators.In summation, from the evidence available, it is apparent that in the lab setting N95/FFP2 masks are superior in their efficiency but in the clinical setting such a difference is not seen as clearly. As such the minimum standard of care should be that of a standard surgical mask. Faced with the emergence of the virulent disease that is Covid-19, it is logical to use FFP2/N95 respirator masks in aerosol generating procedures where they offer greater resistance to fluid penetration and a better face seal when adequately fit tested as a gold standard. But if a dry field isolation technique involving high volume evacuation is used, there is no clear benefit of respirator masks (N95/FFP2 or N99/FFP3) when balanced with the extra risk of compliance, cost and comfort in wearing a standard fluid-resistant surgical mask.

The BRightest Target Explorer (BRITE) is the pioneering nanosatellite mission dedicated for photometric observations of the brightest stars in the sky. The BRITE CCD sensors are poorly shielded against extensive flux of energetic particles which constantly induce defects in the silicon lattice. In this paper we investigate the temporal evolution of the generation of the dark current in the BRITE CCDs over almost 4 years after launch. Utilizing several steps of image processing and employing normalization of the results it was possible to obtain useful information about the progress of thermal activity in the sensors. The outcomes show clear and consistent linear increase of induced damage despite the fact that only about 0.14% of CCD pixels were probed. By performing the analysis of temperature dependencies of the dark current, we identified the observed defects as phosphorus-vacancy (PV) pairs, which are common in proton irradiated CCD matrices. Moreover, the Meyer-Neldel empirical rule was confirmed in our dark current data, yielding E_MN=24.8 meV for proton-induced PV defects.

Planning and implementation of construction projects are difficult processes and are burdened with many risk elements. The budget spread over time, which is developed on the basis of the schedule, presents the expected distribution of costs throughout the duration of the works, which during the implementation of the project is subject to constant changes resulting from time, cost and organizational factors. Managing construction contracts requires managers to be able to analyze on an ongoing basis the variances of production costs - from the values calculated in the offer cost estimate and assumed in the Budgeted Cost of Work Scheduled. The article attempts to analyze the emerging time and cost variances using proprietary C-S and S-C monitoring, based on simple indicators of the EVM method. An example of construction of a multi-family housing development was used to study the variances of planned and incurred costs.

The AtomDB project provides models of X-ray and EUV emitting astrophysical spectra for optically thin, hot plasma. We present the new software package, PyAtomDB, which now underpins the entire project, providing access to the underlying database, collisional radiative model calculations, and spectrum generation for a range of models. PyAtomDB is easily extensible allowing users to build new tools and models for use in analysis packages such as XSPEC. We present two of these, the kappa and ACX models for non-Maxwellian and Charge-Exchange plasmas respectively. In addition, PyAtomDB allows full open access to the apec code which underlies all of the AtomDB spectra and has enabled development of a module for estimating the sensitivity of emission lines and diagnostic line ratios to uncertainties in the underlying atomic data. We present these publicly available tools and results for several X-ray diagnostics of Fe L-shell ions and He-like ions as examples.

Introduction: The current generation of 3D printers are lighter, cheaper, and smaller, making them more accessible to the chairside digital dentist than ever before. 3D printers in general in the industrial and chairside setting can work with various types of materials including, metals, ceramics, and polymers. Evidence presented in many studies show that an ideal material used for dental restorations is characterised by several properties related to durability, cost-effectiveness, and high performance. This review is the second part in a 3D Printing series that looks at the literature on material science and applications for these materials in 3D printing as well as a discussion on the potential further development and future evolution in 3D printing materials. Conclusions: Current materials in 3D printing provide a wide range of possibilities for providing more predictable workflows as well as improving efficiency through less wasteful additive manufacturing in CAD/CAM procedures. Incorporating a 3D printer and a digital workflow into a dental practice is challenging but the wide range of manufacturing options and materials available mean that the dentist should be well prepared to treat patients with a more predictable and cost effective treatment pathway. As 3D printing continues to become a commonplace addition to chair side dental clinics, the evolution of these materials, in particular reinforced PMMA, resin incorporating zirconia and glass reinforced polymers offer increased speed and improved aesthetics that will likely replace subtractive manufacturing milling machines for most procedures.

The voluminous daily output of autism research has become increasingly disconnected, existing largely within highly specific subspecialty areas, and lacking cross-disciplinary linkages of context, theory, and findings to inform a unified body of knowledge. Robust syntheses of published research across the fields of psychiatry, cellular and molecular biology, neurology, endocrinology, immunology, behavioral and social sciences, and pedagogy may help clarify and extend current knowledge by guiding more efficient future research efforts investigating underlying causes, developmental divergences, novel treatments, and specific, sensitive biological markers in autism. This synthesis of interdisciplinary research indicates the hypothalamic-pituitary-adrenal (HPA) stress axis may be at the center of an interaction among sex steroids, immune function, signaling protein transcriptions, neurogenesis, and dysregulation of brain structures sending or receiving projections from the HPA stress axis. These interaction manifest observably as a range of sexually dimorphic behaviors and functional limitations often falling within the current diagnostic features of Autism Spectrum Disorder (ASD). The pathogenicity of endocrine dysregulation may serve as a valuable model for developing a cohesive theory of ASD by explaining how the HPA and connected brain areas respond to extreme conditions of dysregulated endocrine signaling to cause symptoms associated with autism.

Although cooperative social networks are considered key to human evolution, emphasis has usually been placed on the functions of men’s cooperative networks. What do women's networks look like? Do they resemble or differ from men's and what does this suggest about evolutionarily inherited gender differences in reproductive and social strategies? In this paper, we test the ‘universal gender differences’ hypothesis positing gender-specific network structures against the ‘gender reversal’ hypothesis that posits women's networks looking more 'masculine' under matriliny. Specifically, we ask whether men's friendship networks are always larger than women's and we investigate measures of centrality by gender and descent system. To do so, we use tools from social network analysis and data on men’s and women’s friendship ties in matrilineal and patrilineal Mosuo communities. In tentative support of the gender reversal hypothesis, we find that women's friendship networks in matriliny are relatively large. Measures of centrality and generalized linear models otherwise reveal greater differences between communities than between men and women. The data and analyses we present are primarily descriptive given limitations of sample size and sampling strategy. Nonetheless, our results provide support for the flexible application of social relationships across genders and clearly challenge the predominant narrative of universal gender differences across space and time.

This review describes how resonance in amides is greatly affected upon substitution at nitrogen by two electronegative atoms. Nitrogen becomes strongly pyramidal and resonance stabilisation, evaluated computationally, can be reduced to as little as 50% that of N,N-dimethylacetamide. However, this occurs without significant twisting about the amide bond, which is borne out both experimentally and theoretically. In certain configurations, reduced resonance and pronounced anomeric effects between heteroatom substituents are instrumental in driving the HERON (Heteroatom Rearrangement On Nitrogen)^† reaction, in which the more electronegative atom migrates from nitrogen to the carbonyl carbon in concert with heterolysis of the amide bond, to generate acyl derivatives and heteroatom-substituted nitrenes. In other cases the anomeric effect facilitates S­_N1 and S_N2 reactivity at the amide nitrogen.

Large-span post-tensioned (PT) beams play a crucial role in maximizing the benefits of post-tensioning techniques. Bonded and unbonded systems are prevalent, with the latter being more widespread in the United States. While bonded systems are advantageous for creating long spans when multiple tendons are grouped in ducts, limited literature exists on their demolition. In a case study, this paper addresses the unique challenge of demolishing large-span bonded post-tensioned beams due to a building's functional change. Emphasizing insights for engineers, it explores the use of cutting and dismantling methods, considering the presence of prestressed cables. The demolition process is distinctive due to the presence of numerous pre-stressed cables along the beams, necessitating a specialized and cautious cutting approach. This is accomplished through the use of a drilling technique that selectively distresses the tendons, ensuring they are not all affected simultaneously. An intriguing observation discussed in this paper pertains to the occurrence of horizontal cracks accompanied by loud sounds following the drilling process, offering insights from the design perspective of PT systems. The paper details an innovative method for safely demolishing large-span bonded PT beams, using ground-penetrating radar and computer models to navigate structural complexities and ensure nearby structures' safety.

To advance probiotic research, a comprehensive understanding of bacterial interactions with human physiology at the molecular and cellular levels is fundamental. Lacticaseibacillus rhamnosus LGG® is a bacterial strain that has long been recognized for its beneficial effects on human health. Probiotic effector molecules derived from LGG®, including secreted proteins, surface-anchored proteins, polysaccharides, and lipoteichoic acids, that interact with host physiological processes have been identified. In vitro and animal studies have revealed that specific LGG® effector molecules stimulate epithelial cell survival, preserve intestinal barrier integrity, reduce oxidative stress, mitigate excessive mucosal inflammation, enhance IgA secretion, and provide long-term protection through epigenetic imprinting. Pili on the cell surface of LGG® promote adhesion to the intestinal mucosa and ensure close contact to host cells. Extracellular vesicles produced by LGG® recapitulate many of these effects through their cargo of effector molecules. Collectively, the effector molecules of LGG® exert a significant influence on both the gut mucosa and immune system, that promotes intestinal homeostasis and immune tolerance.

Medication non-adherence remains a substantial obstacle in asthma care, prompting the exploration of novel therapeutic modalities that prioritize rapid symptom relief, anti-inflammatory activity and facilitate patients’ compliance. This task is well served by a new form of therapy - inhaled triple-combination medications ICS/LABA/LAMA (inhaled glucocorticosteroid/long-acting beta2-agonist/long-acting muscarinic antagonist). The integration of three medications within a singular inhalation device culminates in the reduction of the effective dose of the principal therapeutic agent for asthma management, namely, ICS. This consolidation yields a dual benefit of minimizing the likelihood of adverse effects typically linked with ICS while concurrently optimizing bronchodilator efficacy. The accumulated evidence suggests that adding LAMA to a medium- or high-dose ICS/LABA results in a decrease of asthma exacerbations compared to medium- or high-dose ICS/LABA alone, accompanied by sustained enhancements in lung function parameters. We propose in adult patients experiencing suboptimal asthma control despite medium/high-dose ICS/LABA treatment - regardless of adherence to GINA-recommended strategies, such as MART therapy as a first-line approach or alternative second-line strategies - the preferred course for intensifying asthma therapy involves the addition of a LAMA, ideally in the form of SITT.

This study develops a hybrid machine learning (ML) algorithm integrated with IoT technology to improve the accuracy and efficiency of soil monitoring and tomato crop disease prediction in Anakapalle, a south Indian station. An IoT device collected one-minute and critical soil parameters—humidity, temperature, pH values, nitrogen (N), phosphorus (P), and potassium (K)—essential for assessing soil health and optimizing crop growth. Kendall's correlations were computed to rank these parameters for utilization in hybrid ML techniques. Various ML algorithms including K-Nearest Neighbors (KNN), Support Vector Machines (SVM), Decision Tree (DT), Random Forest (RF), and Logistic Regression (LR) were evaluated. A novel hybrid algorithm, 'Bayesian Optimization with KNN', was introduced to combine multiple ML techniques and enhance predictive performance. The hybrid algorithm demonstrated superior results with 95% accuracy, precision, and recall, and an F1 score of 94%, while individual ML algorithms achieved varying results: KNN (80% accuracy), SVM (82%), DT (77%), RF (80%), and LR (81%) with differing precision, recall, and F1 scores. This hybrid ML approach proved highly effective in predicting tomato crop diseases in natural environments, underscoring the synergistic benefits of IoT and advanced ML techniques in optimizing agricultural practices.

This paper describes and demonstrates an autonomous robotic team that can rapidly learn the characteristics of environments that it has never seen before. The flexible paradigm is easily scalable to multi-robot, multi-sensor autonomous teams, and is relevant to satellite calibration/validation and the creation of new remote sensing data products. A case study is described for the rapid characterisation of the aquatic environment, over a period of just a few minutes we acquired thousands of training data points. This training data allowed our machine learning algorithms to rapidly learn by example and provide wide area maps of the composition of the environment. Along side these larger autonomous robots two smaller robots that can be deployed by a single individual were also deployed (a walking robot and a robotic hover-board), observing significant small scale spatial variability.

Areas covered with vegetation play a key role for life on Earth and should be inventoried in a clear and complete manner in order to improve the process of its protection and development. Data showing the amount of greenery in areas most deformed by humans, i.e. urbanized areas, are particularly important. Local governments need to know how to invest theirs limited sources in the quality of life of residents by supplementing the urban fabric with additional vegetation. The article presents a proposal for how to calculate the degree of greenness of cities based on remote sensing data. Additionally, a novel method was proposed to help in planning the development of areas covered with vegetation, taking into account the spatial distribution of the local population. The result was a comprehensive method presenting the actual natural situation in a specific city.

D-type cyclins encode G1/S cell cycle checkpoint proteins, that play a crucial role in defining cell cycle exit and progression. Precise control of cell cycle exit is vital during embryonic development, with defects in the pathways regulating intracellular D-type cyclins resulting in abnormal initiation of stem cell differentiation in a variety of different organ systems. Furthermore, stabilisation of D-type cyclins is observed in a wide range of disorders characterised by cellular over-proliferation, including cancers and overgrowth disorders. In this review, we will summarise and compare the roles played by each D-type cyclin during development and provide examples of how their intracellular dysregulation can be an underlying cause of disease.

We recently demonstrated the effectiveness of long-term treatment with rifaximin and the probiotic VSL#3 at improving urogenital and gastrointestinal symptoms in patients with both chronic inflammatory prostatitis (IIIa prostatitis) and diarrhea-predominant irritable bowel syndrome (IBS-D), relative to patients with IBS-D alone. Because low-grade inflammation of the intestine and prostate may be one of the reasons for co-developing both IIIa prostatitis and IBS-D, we designed the present study to once again evaluate the efficacy of combined rifaximin and VSL#3 treatment in patients affected by IIIa prostatitis plus IBS-D, but we also measured seminal plasma pro-inflammatory (IL-6) and anti-inflammatory (IL-10) cytokines before and after treatment. We consecutively enrolled 124 patients with IIIa prostatitis and IBS-D (diagnosed using the Rome III criteria). Patients were randomized into two groups: group A (n=64) was treated with rifaximin (seven days per month for three months) followed by VSL#3, and group B (n=60) was treated with a placebo. At the beginning of the study and after three months of treatment, all patients completed NIH-CPSI and IBS-SSS questionnaires to score the severity of their urogenital and gastrointestinal symptoms, and we measured seminal plasma levels of IL-6 and IL-10 using ELISA. We defined patients who improved following the treatment as those with a ≥6-point reduction in their NIH-CPSI score or ≥50-point reduction in their IBS-SSS score. By the end of the intervention, 68.7% and 62.5% of patients from group A reported improved NIH-CPSI and IBS-SSS scores, respectively, compared to only 3.3% and 5% of the placebo group. Group A patients also had significantly lower mean seminal plasma levels of IL-6 (11.3 vs 32.4 pg/mL) and significantly higher mean levels of IL-10 (7.9 vs 4.4 pg/mL) relative to baseline, whereas levels of IL-6 and Il-10 did not change in the placebo group. The co-occurrence of two clinical phenotypes (IBS-D plus IIIa prostatitis) result in increased intestinal inflammation and altered immune activation, both of which can be balanced by treatment with rifaximin and VSL#3.

Abstract: NFinFET transistors with fin channel length 90nm and a planar MOSFET transistor with channel length 180nm and 90nm are presented with characteristic curves at various gate biases. A finalized algorithm with kink effects is effectively responsible for addressing the field effect transistors. The algorithm includes the modified conventional current-voltage formula and a nonlinear heat-associated kink solution which is simplified as a Gaussian form. Three parameters in modified model includes kN (related with channel width, channel length, and gate oxide capacitor, and proportional to the mobility of carriers)Vth(Threshold Voltage), and (the inverse of Early Voltage). Those parameters are determined to minimize the discrepancies between the measured data and the fitting values, but leave kinks located at around (VGS－Vth), which are deliberately eliminated by the Gaussian form because of the agitation of thermal kink effects. The whole fitting is made to be as close as the as-measured IDS-VDS. In the mean time, those determined parameters are physically meaningful after the analysis has been done.

The most recent National Research Council Nutrient Requirements for Sheep and Goats was published in 2007, one of the most consequential nutrient requirement recommendations for sheep and goats in the world. It is pertinent to continue the refinement and discussion of nutrient utilization and requirements for the purposes of enhancing the efficiency of production systems, maximizing resource economy, and minimizing the carbon footprint, among others. Progress has been made in the estimation of energy and protein requirements in sheep and goats, mainly utilizing empirical feeding experimentation, comparative slaughter technique and minimum endogenous loss method. In sheep, newer estimates of energy and protein requirements for maintenance and growth and partial efficiencies had been reported since 2007. There were suggestions that energy and protein requirements could have been affected by breed, wool growth, gender and size; with these reported values being similar or lower than the recommended values in international feeding systems such as NRC, ARC, INRA and AFRC. In goats, energy and protein requirements for growing goats were reported to be either higher or lower than the established recommendations, depending upon meat or dairy breeds. Effect of gender on energy requirement appeared to be related to the stage of growth or degree of maturity. Newer data also suggested that the guidelines of the major feeding systems for the entire growth phase may not be adequate for non-pregnant and non-lactating pubertal females. In multiparous pregnant goats, energy and protein requirements for maintenance did not appear to be affected by days of pregnancy, but efficiencies of metabolizable energy and metabolizable protein utilization for pregnancy were. There were suggestions that that metabolizable protein synthesis in the rumen can be predicted from energy intake using combined equations that encompass both sheep and goats, but more data on goats were called for to account for specific differences in nutrition. In addition to sulfur, there has been progress made on the estimation of maintenance and growth requirements of calcium, phosphorus, potassium and magnesium in goats, with suggestions on the consideration of gender and breed differences. Species, level of Intake, genotype, mature size, age, gender, body composition, use of tissue energy, activity, season, and acclimatization continue to be important considerations for the estimation of nutrient requirements in sheep and goats, with emerging factors such as climate change, heat stress, parasitism and secondary plant compounds. Model equations and partial efficiencies used by NRC to predict energy and protein requirements for maintenance, growth, lactation, and fiber have been highlighted and discussed for the purpose of a more focus discussion and refinement for the future. Potential and limitation of both traditional and emerging methodologies in determining the nutrient requirements in sheep and goats were discussed. To justify the research investment, emerging methodologies such as nutrigenomics will have to be linked more directly to the improvement of production efficiency via more precise prediction of nutrient requirement.

The paper presents an analysis of the possibility of producing traction brushes from waste materials. Brushes are used to ensure good electrical contact between the rail and the pantograph. Slides are produced in the process of hot pressing, with parameters of heating up to max 175 ⁰C, at the minimal pressure value of 200 MPa. The developed brushes with a high (55-60%) content of recycled materials have comparable characteristics to commercial brushes, and some of the prototypes are even more durable and break-resistant.

Background/Objectives: Vitamin D’s effect on risk health outcomes is often evaluated using prospective cohort studies. Risk ratios (RRs; e.g., hazard ratios or odds ratios) are determined for incidence for participants with baseline serum 25-hydroxyvitamin D [25(OH)D] concentrations below or above specified values. Serum 25(OH)D concentrations vary over time, thereby diluting the effect of 25(OH)D for long follow-up periods. Inverse relationships between RR and follow-up period have been reported for all-cause mortality rate and cancer incidence rates. Here I evaluate the effect for neurological outcomes. Methods: I analyzed how follow-up period affected results from 10 cohort studies of all-cause dementia, 6 studies of Alzheimer’s disease, and 9 for cognitive impairment with respect to vitamin D deficiency. Results: For all-cause dementia, Alzheimer’s disease, and cognitive impairment, respectively, the linear regression fits are RR = 2.9 – 0.14 × years, r = 0.73, p = 0.02; RR = 2.9 – 0.14 × years, r = 0.69, p = 0.13; and RR = 1.8 – 0.066 × years, r = 0.72, p = 0.03. The regression fit to RR for the shortest follow-up period for each outcome is considered the best estimate of vitamin D deficiency’s effect on risk. Those values are approximately twice that found by averaging all RRs without considering the effect of follow-up period. Conclusions: Vitamin D’s effect on risk of neurological conditions should be determined with relatively short follow-up periods after repeated 25(OH)D measurements as warranted during follow-up.

Background/Objectives: The global burden of metabolic dysfunction-associated steatotic liver disease (MASLD) is increasing at an alarming rate. Cardiovascular disease (CVD) is the leading cause of mortality in MASLD patients, therefore, the therapeutic interventions for MASLD should improve coronary risk factors such as obesity, diabetes and dyslipidemia, in addition to improving liver function. The evidence on effect of sodium-glucose cotransporter 2 inhibitors (SGLT2is) which have beneficial pharmacological properties for MASLD, especially the long-term effects, on the progression of MASLD in Asian population is very limited. Methods: The retrospective longitudinal study was performed by using the medical records at the National Center for Global Health and Medicine, Kohnodai Hospital, Japan. We picked up patients with type 2 diabetes who had taken SGLT2is for at least 3 years or longer between April 1, 2014 and March 31, 2018. We collected the data on metabolic parameters, including blood tests and anthropometric parameters, and compared the data before and after the initiation of SGLT2is treatment. Results: During the observation period, 324 patients had taken SGLT2is for 3 years. The 3-year-SGLT2is treatment significantly reduced body weight, hemoglobin A1c, low-density lipoprotein-cholesterol, triglyceride and non-high-density lipoprotein-cholesterol (HDL-C) and significantly increased HDL-C. Furthermore, this treatment significantly improved liver function and the markers for hepatic steatosis and hepatic fibrosis. Conclusions: Considering that the development of CVD determines the prognosis of MASLD patients, the long-term SGLT2is treatment may be an ideal therapy for MASLD patients.

To close the nutrient-related yield gaps in maize, balanced nutrition using primary and secondary macronutrients as well as micronutrients is recommended. Multi-nutrient diagnostic field trials were conducted in Guinea Savanna of Nigeria to assess the interactive effects of macronutrients and micronutrients on maize grain yields, nutrient uptake as well as N, P and K use efficiencies. The treatments consisted of a control (zero fertilizer applied), an NPK treatment and 10 other treatments in which macronutrient (Mg, S) and/or micronutrients (B, and Zn) were added to the NPK. The experiment was laid out in Randomized Complete Block Design with 3 replications. Data collected were subjected to mixed model with nutrient management strategy as fixed effects while replication nested in location and interaction between location and nutrient management strategy as random effects. The results revealed significant effects (P < 0.05) of nutrient management strategy on maize yield, nutrient uptake and nutrient use efficiencies of N, P and K. The study revealed that yield advantage over the recommended NPK fertilizer as a result of application macronutrients and micronutrients were highest with Mg in Lere (2.4 t ha⁻¹), S + B + Zn in Faskari (2.8 t ha⁻¹), S + B in Doguwa (1.5 t ha⁻¹) and S + Zn in Toro (2.4 t ha⁻¹). Addition of Mg, S and B significantly increases macronutrient uptakes over the recommended NPK only. Agronomic use efficiency, internal utilization efficiency, apparent recovery efficiency and partial factor productivity were significantly increased with the addition of S, Mg, and B but were not improved with Zn application. It was concluded that nutrient limitations to maize in the Guinea Savanna go beyond N, P and K. This study recommends that S, Mg, and B are needed to improve maize productivity and engender improve the use efficiency of NPK fertilizers.

The present paper presents findings from the follow-up of 185 of these nurses who had been involved in the front-line care of COVID-19 patients in urban centres in Northern England, during and after the “second wave” of COVID patients in November, 2020. Measures of adjustment, stress (including PTSD), and Maslowian self-actualization were added to earlier measures of personality, adjustment, work-life stress, and career intention. Cluster analysis identified three types in the 2020-2023 cohort: I ‘Actualizing Professionals’; (N=62); II ‘Strong Professionals’ (N=56); III ‘Highly Stressed Nurses’ (N=45). These latter very stressed nurses included all nurses (N=16) identified as having PTSD symptoms.

Study Objectives: The aim of this study is to explore the association between serum 25-hydroxyvitamin D [25(OH)D] levels, a marker of Vitamin D status, and excessive daytime sleepiness (EDS), expressed as increased scores of Epworth Sleepiness Scale (ESS), in a group of prospectively enrolled patients with obstructive sleep apnea (OSA). Methods: Newly diagnosed patients with OSA, divided into two groups, those with EDS (ESS>10) and those without EDS (ESS

It is a well-established fact that inadequate Vitamin D (Vit-D) levels have negative effects on the development and progression of malignant diseases, mainly cancer. The purpose of this paper was to elucidate the effects of Vit-D intake and serum 25-hydroxyvitamin-D (25(OH)D) levels on cancer incidence and mortality, the current evidence in this field, and the biases of this evidence using the meta-meta-analysis method. Meta-analyses focusing on Vit-D intake, serum 25(OH)D levels, and cancer risk/mortality were identified. A structured computer literature search was performed in PubMed/Medline, Web of Science (WoS), and Scopus electronic databases using predetermined keyword combinations. Primary and secondary meta-meta-analyses were carried out, combining odds ratios (ORs), risk ratios (RRs), and hazard ratios (HRs) for outcomes reported in selected meta-analyses. A total of 35 eligible meta-analyses assessing the association between Vit-D and cancer incidence and/or mortality were included in this study. In the pooled analysis, higher Vit-D intake and serum 25(OH)D levels were associated with lower cancer risk (OR = 0.93, 95% CI: 0.90-0.96, p < 0.001; OR = 0.80, 95% CI: 0.72-0.89, p < 0.001, respectively) and cancer-related mortality (RR = 0.89, 95% CI: 0.86-0.93, p < 0.001; RR = 0.67, 95% CI: 0.58-0.78, p < 0.001, respectively). When meta-analyses whose primary reports included only randomized controlled trials were pooled, there was no significant association between Vit-D intake and cancer risk (OR = 0.99, 95% CI: 0.97-1.01, p = 0.320). In subgroup analysis, Vit-D consumption was associated with a significant decrease in colorectal and lung cancer incidence (OR = 0.89, 95% CI: 0.83-0.96, p = 0.002; OR = 0.88, 95% CI: 0.83-0.94, p < 0.001, respectively). Taken together, both Vit-D intake and higher 25(OH)D levels may provide remarkable benefits in terms of cancer incidence and mortality, however, careful evaluation according to cancer types is critically important and recommended.

Purpose: Proximal Femur Fractures (PFFs) in elder patients lead to decreased productivity. Skilled nursing facilities (SNFs) and inpatient rehabilitation facilities (IRFs) are non-home destinations for post-discharge disposition. This study aims to evaluate the loss of independence (LOI) following PFFs and examine the economic impact it entails. Method: Literature from various databases was collected and analyzed retrospectively. The inclusion criteria included patients age >18 years and articles published after 1990. All studies were screened and a PRISMA chart was used to demonstrate the search process. 24 studies were finally used for review. Results: LOI following PFFs significantly increases with age. Fractures in geriatrics avail a significant amount of post-care resources and had longer lengths of stay. Furthermore, six pre-operative risk factors were identified for non-home disposition including age >75, female, non-Caucasian race, Medicare status, prior depression, Charlson Comorbidity Index. Patients discharged directly to home have lower total cost compared to those discharged to rehabilitation units. Loss of independence increases with advancing age. Discussion: PFFs can lead to serious loss of independence among elderly patients with direct impact on economic, social, psychological aspects and the healthcare system.

Relationships of the three bryophyte lineages (liverworts, mosses, and hornworts) to vascular plants is a pivotal question in the study of origin and evolution of land plants. In recent decades, this question has been subject to intense phylogenetic analyses using morphological characters, multigene DNA sequences, and genome structural characters. A tentative consensus reached ten years ago suggested that bryophytes are a paraphyletic group, with liverworts being sister to all other land plants and hornworts being sister to vascular plants. However, several more recent nuclear phylogenomic studies have concluded that bryophytes represent a monophyletic group that is sister to vascular plants. A discussion is presented here on strengths and weaknesses of different types of characters (morphological traits, nucleotide sequences, and genome structural arrangements), and their suitability for resolving deep phylogenetic relationships. Moreover, several criteria for credible phylogenetic reconstruction are proposed. Strong statistical support for reconstructed relationships should be derived from high quality, independent characters selected for suitability to the particular question being addressed. The relationships inferred in a study should be congruent with those from as many other lines of phylogenetic evidence as possible. Any incongruities should be explicable by well-understood biological mechanisms. It is concluded that the relationships of the three bryophyte lineages to vascular plants should currently be viewed as unresolved. This is a difficult phylogenetic problem; the land plants underwent a rapid radiation a long time ago. Yet, further exploration of analytical methods and careful choice of characters should lead to eventual elucidation of diversification patterns among early land plants.

Surfactant proteins A and D (SP-A and SP-D) belong to the collectin subfamily of C-type oligomeric lectins. They are pattern-recognition molecules (PRM), able to recognise pathogen- or dan-ger-associated molecular patterns (PAMP, DAMP) in the presence of Ca2+ cations. That property enables opsonisation or agglutination of non-self or altered/abnormal self-cells, and contributes to their clearance. Like other collectins, SP-A and SP-D are characterised by the presence of four distinct domains: a cysteine-rich domain (at N-terminus), a collagen-like region, an α-helical neck domain and a globular carbohydrate-recognition domain (CRD) (at C-terminus). Pulmonary sur-factant is a lipoprotein complex, preventing alveolar collapse by reducing surface tension at the air-liquid interface. SP-A and SP-D, produced by type II alveolar epithelial cells, and Clara cells, are not only pattern-recognition molecules but also contribute to the surfactant structure and homeo-stasis. Moreover, they are expressed in a variety of extrapulmonary sites where they are involved in local immunity. The term “cancer” includes a variety of diseases: tumours start from uncontrolled growth of abnormal cells in any tissue which may further spread to other sites of the body. Many cancers are incurable, difficult to diagnose and often fatal. This short review summarises anti- and pro-tumourigenic associations of SP-A and SP-D as well as perspectives of their usefulness in cancer diagnosis and therapy.

Abstract Aim of the study: Presentation of ophthalmic symptoms of Cerebral Autosomal Dominant Arteriopathy with Subcortical Infracts and Leucoencephalopathy (CADASIL). Material and methods: Clinical presentation of female patient with diagnosed CADASIL, manifested by transient loss of vision, migraine, convergence insufficiency, diplopia, increased deep tendon reflexes of upper left limb, subcortical infarcts, mood disturbances and dementia. Results: Confirmed NOTCH3 gene mutation (p.Cys212Gly), and presence of granular osmiophilic material (GOM) in cutaneous small vessel wall in immunohistochemistry laboratory test (IHC). Magnetic resonance imaging (MRI) revealed bilateral focal vasogenic lesions in white matter of cerebral hemisphere with single micro-focal infarct in the left external capsule. Furthermore, a left eye exophoria, a bilateral peripheral visual field loss of 20 degrees and a loss of nasolabial fold was confirmed during ophthalmic tests. An eye fundus examination as well as a fluorescein angiography (FA) revealed vessel constriction of retinal arteries and a peripheral retinal pigment epithelium (RPE) atrophy with focal drusen in the left eye. The doppler ultrasonography (USG) confirmed a decreased blood flow and an increased vascular resistance of the extraocular vessels. The pattern electroretinogram (PERG) revealed a reduced P50 wave amplitude in the patient’s left eye. Conclusions: intermittent blindness, migraine, convergence failure, diplopia with specific MRI signs, NOTCH3 mutation, and the presence of GOM in the skin of small blood vessels in a young or middle-aged patient suggests CADASIL. New observations include: atrophic changes in the RPE, hemodynamic disturbances in blood flow in the short posterior ciliary arteries and in the central retinal artery, single drusen in the retina, and a reduced amplitude of the P50 wave in PERG.

Three-dimensional (3D) printing technology, also known as additive manufacturing (AM), has emerged as an attractive state-of-the-art tool for precisely fabricating functional materials with complex geometries, championing several advancements in tissue engineering, regenerative medicine, and therapeutics. However, this technology has an untapped potential for biotechnological applications, such as sensor and biosensor development. By exploring these avenues, the scope of 3D printing technology can be expanded and pave the way for groundbreaking innovations in the biotechnology field. Indeed, new printing materials and printers would offer new possibilities for seamlessly incorporating biological functionalities within the growing 3D scaffolds. Herein, we review the extrusion-based 3D printing modalities emphasizing biosensor applications. We highlighted the application of natural, synthetic, and composite biomaterials as 3D-printed soft hydrogels. Emphasis was placed on the approach by which the sensing molecules were introduced during the fabrication process. Finally, the future perspective was provided.

Dams are a critical infrastructure system for many communities, but they are also one of the most challenging to inspect. Dams are typically very large and complex structures, and the result is that inspections are often time-intensive and require expensive, specialized equipment and training to provide inspectors with comprehensive access to the structure. The scale and nature of dam inspections also introduces additional safety risks to the inspectors. Unmanned aerial vehicles (UAV) have the potential to address many of these challenges, particularly when used as a data acquisition platform for photogrammetric three-dimensional (3D) reconstruction and analysis, though the nature of both UAV and modern photogrammetric methods necessitates careful planning and coordination for integration. This paper presents a case study on one such integration at the Brighton Dam, a large-scale concrete gravity dam in Maryland, USA. A combination of multiple UAV platforms and multi-scale photogrammetry was used to create two comprehensive and high-resolution 3D point clouds of the dam and surrounding environment at intervals. These models were then assessed for their overall quality, as well as their ability to resolve flaws and defects that were artificially applied to the structure between inspection intervals. The results indicate that the integrated process is capable of generating models that accurately render a variety of defect types with sub-millimeter accuracy. Recommendations for mission planning and imaging specifications are provided as well.

The Asian clam Corbicula fluminea is a native aquatic species in Eastern Asia and Africa but has become one of the most ecologically and economically harmful invasive species in aquatic ecosystems in Europe, North America, South America. Due to their natural characteristics as a hermaphroditic species with high fecundity and dispersal capacity, Asian clams are extremely difficult to eradicate once they have infiltrated a waterbody. This is an emerging issue for states in the Northeastern United States as Asian clams expand their range farther North due to climate change. There has been extensive research conducted to develop chemical treatments to reactively control invasive mollusc populations and proactively prevent their further spread. However, treatments are mostly targeted toward biofouling bivalves in industrial settings. A comprehensive review of Asian clam chemical treatments used in open water systems was performed to evaluate molluscicides and identify toxicity ranges of emerging treatments that maximize Asian clam mortality and minimize negative impact to water quality and non-target species. The potential chemical applications in Asian clam control and management are summarized in this report to assist resource managers and practitioners on invasive Asian clam management.

This work addresses the problem of automatic head pose estimation and its application in 3D gaze estimation using low quality RGB--D sensors without any subject cooperation or manual intervention. The previous works on 3D head pose estimation using RGB--D sensors require either an offline step for supervised learning or 3D head model construction which may require manual intervention or subject cooperation for complete head model reconstruction. In this paper, we propose a 3D pose estimator based on low quality depth data, which is not limited by any of the aforementioned steps. Instead, the proposed technique relies on modeling the subject's face in 3--D rather than the complete head, which in turn, relaxes all of the constraints with the previous works. The proposed method is robust, highly accurate and fully automatic. Moreover, it does not need any offline step. Unlike some of the previous works, the method only uses depth data for pose estimation. The experimental results on the Biwi head pose database confirm the efficiency of our algorithm in handling large pose variations and partial occlusion. We also evaluate the performance of our algorithm on IDIAP database for 3D head pose and eye gaze estimation.

Vitamin D has important anti-inflammatory, anti-microbial properties and plays a central role in host immune response. Due to the crucial role of the kidneys in the metabolism of vitamin D, patients with chronic kidney disease (CKD), are prone to vitamin D deficiency. The resultant reduction in the production of calcitriol, the activated form of vitamin D in patients with CKD is responsible for exacerbating the existing renal impairment and periodontal inflammation. Recent evidence suggests a bidirectional, causal relationship between periodontitis and renal functional status. Both conditions have shared pathophysiologic mechanisms including oxidative stress, increases in the systemic inflammatory burden and impaired host response. This review explores the association between vitamin D, CKD and periodontitis. The review summarises the current evidence base for the classical and non-classical vitamin D metabolic pathways, the biological mechanisms linking vitamin D deficiency, CKD and periodontitis, as well as the bidirectional relationship between the two chronic inflammatory conditions. Finally, the paper explores the impact of vitamin D deficiency on CKD, periodontitis, and related co-morbidities.

Late onset Pompe disease is a recessive lysosomal storage disease. Clinical features include skeletal muscles deficiency and diaphragm weakness. Clinical management relies on supportive treatment and mechanical ventilation in patents with chronic respiratory failure. M mode ultrasound and tissue Doppler imaging can be used to assess and to follow up diaphragm function.

In India, the divorce rate is rising year after year. Divorces are thought to have increased by more than a factor of two during the past two decades. India has great cultural diversity, and each of its states has something unique to offer. The divorce rate in India, which differs from state to state, is among the most frequently discussed subjects. More than 30% of marriages end in divorce in big cities like Delhi, Mumbai, Chennai, and Bangalore. Divorce applications have nearly tripled in the past few years in cities like Delhi, Bangalore, Mumbai, Kolkata, and Lucknow. In India, the divorce rate has increased, especially in small cities. Hence, the reasons behind divorce in India were explored in this article. In order to analyze the causes of divorce, the current study aimed to combine the critical components of TOPSIS and COPRAS methodologies in a fuzzy environment. Additionally, it is shown that a comparison study may pinpoint the characteristics that influence divorces the most.

Neurological disorders are the leading cause of cognitive and physical disability worldwide, affecting 15% of the global population. Due to the demographics of aging, the prevalence of neurological disorders, including neurodegenerative diseases, will double over the next two decades. Unfortunately, while available therapies provide symptomatic relief for cognitive and motor impairment, there is an urgent unmet need to develop disease-modifying therapies that slow the rate of pathological progression. In that context, biomarkers could identify at-risk and prodromal patients, monitor disease progression, track response to therapy, and parse causality of molecular events to identify novel targets for further clinical investigation. Thus, identifying biomarkers that discriminate between diseases and reflect specific stages of pathology would catalyze the discovery and development of therapeutic targets. This review will describe the prevalence, known mechanisms, ongoing or recently concluded therapeutic clinical trials, and biomarkers of three of the most prevalent neurodegenerative diseases, including Alzheimer’s disease (AD), amyotrophic lateral sclerosis (ALS), and Parkinson’s disease (PD).

Background and Objectives. To examine trends in the links between induced abortion and subsequent mental health problems for U.S. women approaching completed fertility. Materials and Methods. Panel data on a nationally-representative cohort of 3,842 ever-pregnant women assessed at mean ages of 15, 22, 28 and 37 years from the National Longitudinal Study of Adolescent to Adult Health (Add Health) were examined for pregnancy outcome-related mental health disorders, with extensive adjustment for confounders including sociodemographic dif-ferences, mental health history, and unwanted pregnancies. Outcomes were defined using pub-lished diagnostic criteria or validated index for depression, anxiety disorder, post-traumatic stress disorder (PTSD), and suicide ideation (affective problems); alcohol abuse, drug abuse, opioid abuse, and cannabis abuse (substance abuse problems); and summary counts of affective problems, substance abuse problems and total disorders. Results were adjusted for abortion under-reporting using cross-wave analysis. Results. The relative risk of mental health disorder with exposure to induced abortion followed an inverted “V” pattern as women aged to midlife, increasing from Wave III (age 22; IRR 1.41) to Wave IV (age 28; IRR 1.67), then dropping sharply by Wave V (age 37; IRR 1.20). The population at-tributable fraction of mental health disorder due to abortion dropped from 18.1% at Wave IV to 8.0% at Wave V. Unlike previous Waves, at Wave V mental health risk was more strongly reduced by exposure to childbirth (IRR 0.70, 95% CI .63, .78, p < .001). Reduced relative metrics at Wave V were not due to reduced prevalence of mental health disorders for ever-aborting women, which increased from Wave IV to Wave V by 1.7%, but increased much more, by 20.5%, for never-aborting women. Conclusion. At midlife approaching completed fertility, differential negative psychological out-comes for ever-aborting U.S. women remained elevated but reduced from younger ages.

Contrasting results have suggested that the prevalence and intensity of post abortion emotional distress (PAD) either diminishes rapidly or persists over time. Few studies have followed women for longer than five years. This study examines retrospective population data on 226 ever aborting U.S. women aged 41-45, at an average of 20 years following the abortion, with extensive measures of PAD. Most post abortive women (55.2%) experienced little or no distress from their abortion(s) and 74.6% were confident it had been the right decision, but 44.8% reported moderate (20.7%) to high (24.1%) distress related to their abortion(s), including 37.7% who reported negative emotions; 31.2% “frequent feelings of loss, grief or sadness;” 24.6% “frequent thoughts, dreams, or flashbacks;” 23.2% for whom thoughts and feelings about their abortion “negatively interfered with life, work, or relationships.” Time since the abortion (mean 20 years, range 0-31 years) was not correlated with PAD (r = -.02, p .71). For the minority of women who experienced it, PAD did not diminish but persisted for decades. An estimated 7.5 million U.S. women currently experience persistent high PAD. Further research to specify risk factors and possible interventions for postabortion distress would be of value for this group of women.

The goal of farmers operating in a market economy is to maximise profit. In the face of the changing political situation, the main social interest, besides food security, should be energy security. This article aims to indicate the direction of agricultural policy development so that it guarantees both the economic security of producers—farmers—and Europe’s energy security. The work uses data obtained from the agri benchmark Cash Crop database. DEA method and stepwise multiple regression were used. The research showed that plants are already grown in Europe which will ensure high energy efficiency of production without compromising farm financial results (including oats, peas and winter rye) and that improving the involvement of certain inputs results in improved production efficiency (among others, by expenditure on agricultural advisory services). The significance of the presented research results from the fact that the recent COVID pandemic and escalation of the military conflict in Ukraine have led to a renewed interest in the concept of EU energy security, i.e. generation of generating the greatest possible amount of energy within the EU, to be used both for food and non-food purposes.

The occurrence of ovarian dysfunction is often due to the imbalance between the formation of reactive oxygen species (ROS) and the (in)effectiveness of the antioxidative defense mechanisms. Primary sources of ROS are the respiratory electron transfer and the activity of NADPH oxidases (NOX), while Superoxide dismutases (SOD) are the main key reg-ulators that control the levels of ROS and reactive nitrogen species intra- and extracel-lularly. Because of their central role, SODs are the subject of research on human ovarian dysfunction, but the sample acquisition is low. The high degree of cellular and molecular similarity between Drosophila melanogaster ovaries and human ovaries provides this model organism with the best conditions for analyzing the role of ROS during ovarian function. In this study, we clarify the localization of the ROS producing enzyme dNox within ovaries of Drosophila melanogaster and by a tissue specific knockdown, we show that dNox derived ROS are involved in the chorion hardening process. Furthermore, we analyze the dSod3 localization and show that reduced activity of dSod3 impacts egg laying behavior, but not the chorion hardening process.

Road alleys, especially on areas of Warmia (north-east Poland), are multifunctional features in open landscapes. They serve as ecological corridors connecting habitats and play an important role in sustaining ecological stability. However, multiple road authorities claim that tree-lined routes are a threat for traffic safety and therefore should be removed. The aspect of safety seems to be crucial to them, significantly overwhelming alley benefits. The vitality problems of the trees (which are mainly mature and aging) deliver arguments to cutting them down. The aim of this paper is examination of environmental and natural value of the road alleys (based on a 14 km long-distance of the Gamerki – Jonkowo road), and verification of the degree of hazard posed by trees designated for cutting because of safety reasons. The six-examination framework for the research was developed. Tree risk assessment and vitality evaluation, pulling tests, examination of protected beetle species - hermit beetle, the lichens species, and examination of bat fauna were performed. The results revealed no trees in the resignation phase and confirmed that the alley is a unique natural and landscape habitat with protected species of lichens, a few bats species and valuable insect species, among others hermit beetle (Osmoderma barnabita) existing there. The environmental value of the alley is, therefore, hard to overestimate and cannot be perceived only as a component of the road infrastructure. The maintenance of the trees seems to be essential when taking into account environmental stability of the region.

This study investigates the evolving corporate governance mechanisms within the context of an emerging economy. Addressing a literature gap, we analyse the influence of corporate governance and earnings quality on idiosyncratic risk in an emerging economy. In particular, this research explores the impact of corporate governance practices and earnings quality on idiosyncratic risk. For this purpose, we utilise a sample of 75 non-financial firms listed on the Pakistani equity market over nine years from 2010 to 2018. Employing the generalised method of moments, the findings of our empirical analysis reveal that firms with robust governance mechanisms and higher earnings quality experience minimal idiosyncratic risk. These outcomes provide valuable insights for standard setters, regulatory authorities, policymakers, and other stakeholders, emphasising the importance of governance mechanisms and earnings management in mitigating idiosyncratic return volatility.

Fire accidents are common accidents amongst residential house occupants in Libya. Some of the factors that can mitigate fire accidents in Libyan residential houses include fire safety awareness and knowledge. This study investigated the level of awareness and knowledge of fire safety amongst residential house occupants in Libya. The possibility and consequences of fire hazards and risk existing in residential houses in Libya were also studied. Experimental data obtained for 1.5 m/s and 3.5 m/s as walking and running evacuation time, respectively amongst residential house occupants in Libya were also compared. The sample consist of 90 respondents with instruments of fire safety awareness and knowledge, fire hazard and consequences, and the involvement of residential house occupants in fire emergency. Statistical analysis was performed at p < 0.05 to determine the levels of residential awareness and knowledge regarding fire safety and the hazard and consequences. The findings illustrated that the items were highly reliable (α > 0.7) and normally distributed. Also, the results illustrated that the majority of residential house occupants in Libya have fair level of fire safety awareness and knowledge with overall percentage of 80% and 90%, respectively. On the other hand, the results further showed that majority of residential house occupants have good level of fire emergency involvement with 90%. This paper proposes a fire safety assessment method which may form the basis of future fire safety practice in Libya.

This paper considers the application of two selected algorithms (Cuckoo Search CS, Firefly Algorithm FA) to determine and maximize the reliability of a two complex system known from the literature. This system operates with resource constraints. In addition, several classical methods for determining the reliability of systems have been applied. Although the CS algorithm is known for its effectiveness as it uses the Lévy flight, for the presented optimization tasks the FA firefly algorithm in the considered parameter range proved to be more effective. The presented results broaden the existing discussion on the application of nature-inspired algorithms for solving RRAP (Reliability Redundancy Allocation Problem) problems. From this point of view, two described test scenarios can be considered as a suitable tool for validating other algorithms in RRAP problems. Not only the values of the criterion functions can be compared, but also other introduced parameters and statistical analyse of variance (ANOVA) with post-hoc RIR Tuckey test was discussed.

Analgesic products for piglet castration are critically needed. This requires extensive animal experimentation such as to meet regulatory-required proof of efficacy. At present, there are no validated methods of assessing pain in neonatal piglets. This poses challenges for investigators to optimize trial design and to meet ethical obligations to minimize the number of animals needed. Pain in neonatal piglets may be subtle, transient and / or variably expressed and, in the absence of validated methods, investigators must rely on using a range of biochemical, physiological and behavioural variables, many of which appear to have very low (or unknown) sensitivity or specificity for documenting pain, or pain-relieving effects. A previous systematic review of this subject was hampered by the high degree of variability in the literature base both in terms of methods used to assess pain and pain mitigation, as well as in outcomes reported. In this setting we provide a narrative review, to assist in determining the optimal methods currently available to detect piglet pain during castration and methods to mitigate castration-induced pain. In overview, the optimal outcome variables identified are nociceptive motor and vocal response scores during castration, and quantitative sensory-threshold response testing and pain-associated behaviour scores following castration.

Magnetic properties of soft magnetic composites are highly sensitive to the processing conditions. In this paper we focus on the possibility to model this effect using the Jiles-Atherton-Sablik theory. It is assumed that the effect of varying compaction pressure may be described by direct introduction of stress-dependent term in the model equations. The values of model parameters are kept constant. Verification of the proposed approach is carried out using measurement data from self-developed iron-based composite cores.