In this paper, precise examination of multi-port antennas with large mutual coupling between the ports is studied. For this purpose, some vital parameters such as active reflection coefficients and realised gain are emphasized. The main motivation of this research is the ignorance of this issue in several recently published papers. Hence, corrections and criticisms to some recently reported results are presented. At first, a microstrip patch consisting of two inverted U-slots is re-examined, which has been proposed in a recently published paper for wideband applications. However, the authors did not present satisfactory results to indicate the performance of the proposed structure. In reverse, some important parameters such as the antenna gain appear to be incorrectly reported. In this paper, the characteristics of the antenna are compared with a simple 50 Ω microstrip line excited by two probes, indicating no significant differences. In the remainder of this paper, some corrections are provided on two examples of wide-beam circularly polarised multi-fed antennas for satellite applications. The first example is the multi-fed spiral antennas with folded arms, which have been proposed as the widebeam antennas at 435 MHz. It is indicated that the antenna height should be increased for better performance. The second example is the quadrifilar square helical antennas with folded arms, which have been proposed as the widebeam antennas for 435 MHz with minor responses at 145 MHz. Some corrections are presented on the previously reported minor responses at 145 MHz.

Machine learning, including deep learning, reinforcement learning, and generative artificial intelligence are revolutionising every area of our lives when data is made available. With the help of these methods, we can decipher information from larger datasets while addressing the complex nature of biological systems in a more efficient way. Although machine learning methods have been introduced to human genetic epidemiological research as early as 2004, those were never used to their full capacity. In this review, we outline some of the main applications of machine learning to assigning human genetic loci to health outcomes. We summarise widely used methods and discuss their advantages and challenges. We also identify several tools, such as Combi, GenNet and GMSTool, specifically designed to integrate these methods for hypothesis-free analysis of genetic variation data. We elaborate on the additional value and limitations of these tools from a geneticist’s perspective. Finally, we discuss the fast-moving field of foundation models and large multi-modal omics biobank initiatives.

Social distancing is a recommended solution by the World Health Organisation (WHO) to minimise the spread of COVID-19 in public places. The majority of governments and national health authorities have set the 2-meter physical distancing as a mandatory safety measure in shopping centres, schools and other covered areas. In this research, we develop a Deep Neural Network-based Model for automated people detection, tracking, and inter-people distances estimation in the crowd, using common CCTV security cameras. The proposed DNN model along with an inverse perspective mapping technique leads to a very accurate people detection and social distancing monitoring in challenging conditions, including people occlusion, partial visibility, and lighting variations. We also provide an online infection risk assessment scheme by statistical analysis of the Spatio-temporal data from the moving trajectories and the rate of social distancing violations. We identify high-risk zones with the highest possibility of virus spread and infection. This may help authorities to redesign the layout of a public place or to take precaution actions to mitigate high-risk zones. The efficiency of the proposed methodology is evaluated on the Oxford Town Centre dataset, with superior performance in terms of accuracy and speed compared to three state-of-the-art methods.

The proposal of novel drugs and approaches for effective treatment of the novel coronavirus is a necessity after the quick outbreak of the disease. Since the commencement of the coronavirus spread, enormous efforts have been made to protect, alleviate and cure the disease, though no specific treatment has been approved. While there have been convincing results in the use of chemical drugs and interferon therapy, such therapeutic approaches have various drawbacks and lack the required performance for the treatment of the new coronavirus. Medicinal plant species can provide a solution as a source of natural antiviral compounds by the accumulation of secondary metabolites and lectins as well as acting as a platform to express the viral immunogenic proteins. This study reviews the advantages and the results of previous research for the treatment of the novel coronavirus disease and previous generations of similar coronaviruses. Several plant-derived anti coronavirus compounds have been nominated that could be targeted for further research due to the similarity of the coronavirus disease in 2003 and the current coronavirus. This review regards plant species such as Scutellaria baicalensis (Baikal skullcap), and Utrica dioica (Stinging nettle) as suitable candidates for the new coronavirus antiviral research. Furthermore, the use of plants such as Nicotiana tabacum (Tobacco) for the expression of the coronavirus viral antigens can be a target for the future vaccinal research of the new coronavirus due to the efficiency of expression and intrinsic antiviral properties.

Background: COVID-19 is a respiratory illness caused by SARS-CoV-2 that has become a global pandemic. Although children can contract the virus, they are generally less likely than adults to develop severe symptoms. Parents and caregivers should monitor their children for symptoms and seek medical attention if their child becomes ill. Practicing good hygiene and social distancing can help prevent the spread of the virus. Vaccines are available for children and can provide additional protection against COVID-19. Understanding the impact of COVID-19 on children is crucial for developing effective public health strategies to control the pandemic.Objectives: The current study aims to determine the prevalence of Covid-19 in pediatric age group in Duhok province and Zakho city, in Kurdistan region. among the children who tested positive for IgG test. If IgG antibodies are detected in a person's blood sample, it suggests that they have been infected with SARS-CoV-2 at some point in the past and their immune system has responded by producing antibodies against the virus.Methods: A cross-sectional investigation was undertaken involving youngsters aged 5 to 12 years. The study encompassed a total of 330 participants, selected between October and December 2022. The children underwent testing to detect IgG antibodies. Moreover, a questionnaire was employed to gather demographic and individual information from each contributor.Results: Among the studied sample, 302/330 (91.5%) of children were positive to IgG antibody test. No gender difference for COVID-19 was found in pediatric age group. Case fatality rate was 0%. 22/302 (6.6%) cases were symptomatic during the infection. However, 282(93.4%) cases were asymptomatic. Conclusions: Covid-19 infection in pediatric age group has good prognosis compared to adults. Intensive care unit (ICU) and death are rare. High-risk groups should be targeted for education and immunization/vaccination. Furthermore, more studies are needed to be conducted in order to investigate the risk factors of the infection and to assess the awareness among the general population about the risk of infection.

AI advances integrate generative design tools in architecture, providing architects with sophisticated design options. It enables the creation of intricate, high-performing projects by exploring diverse design possibilities with AI and algorithms. Generative AI and generative design empower architects to create better-performing, sustainable, and efficient design solutions and explore diverse design possibilities. This paper leverages multimodal generative AI to enhance design creativity by combining textual and visual inputs. Blockchain technology converts design metadata into NFTs, ensuring secure, authentic, and traceable data storage. The framework addresses data ownership, legal adherence, and client-architect collaboration and is entirely scalable for digital design authentication. This research exemplifies the pragmatic fusion of Generative AI and blockchain technology applied in architectural design for more transparent, secure, and effective results. This study provides a strategy that uses generative AI technologies to achieve an efficient and creative workflow in the early stages of architectural design.

According to many researchers, Abstraction is the basis of mathematics, computing, counting devices, and computer science and engineering. What is more, all of the above deal with complexity management in some way, and abstraction is the most basic mechanism of complexity management.Generative software development - whether in the sense of empowering humans by machine to create software or in the sense of reusing products - has been and is one of the serious concerns and goals of software engineering. The interesting thing is that in both views of generativity, the main issue is still, in a way, complexity management: whether this complexity management is to achieve diversity and reuse management (Czarnecki’s approach) or to Structuring from existing structures (the approach of Alexander and his followers in an object-oriented society).In this article, we will first look at complexity and its various definitions. The definitions that show, despite the different perspectives on complexity in different disciplines and domains, all point in one direction. We will conclude that complexity is rooted in multiplicity. In the following, we will formally define complexity. In the following discussion, we will look at the generative patterns of software development, and then we will look at the complexity management patterns at seven levels.In this article, the author has tried to maintain a comprehensive approach to complexity and to consider the approaches of different domains to complexity.

Microarray gene expression analysis is a powerful technique used in cancer classification and research to identify and understand gene expression patterns that can differentiate between different cancer types, subtypes, and stages. However, microarray databases are highly redundant, inherently nonlinear, and noisy. Therefore, extracting meaningful information from such a huge database is a challenging one. The paper adopts the Fast Fourier Transform (FFT) and Mixture Model (MM) for dimensionality reduction and utilizes the Dragonfly optimization algorithm as the feature selection technique. The classifiers employed in this research are Nonlinear Regression, Naïve Bayes, Decision Tree, Random Forest and SVM (RBF). The classifiers' performances are analyzed with and without feature selection methods. Finally, Adaptive Moment Estimation (Adam) and Random Adaptive Moment Estimation (RanAdam) hyper-parameter tuning techniques are used as improvisation techniques for classifiers. The SVM (RBF) classifier with the Fast Fourier Transform Dimensionality Reduction method and Dragonfly feature selection achieved the highest accuracy of 98.343% with RanAdam hyperparameter tuning compared to other classifiers.

The primary objective of this study was to demonstrate the potential of digital image analysis as a tool to identify microplastic (MP) particles in surface waters and to facilitate their characterisation in terms of 2D and 3D morphology. Digital image analysis preceded by microscopic analysis was used for an exhaustive quantitative and qualitative evaluation of MPs isolated from the Vistula river. Using image processing procedures, 2D and 3D shape descriptors were determined. The Principal Components Analysis (PCA) was used to interpret the relationships between the parameters studied, characterising MP particle geometry, type and colour. This multivariate analysis of the data allowed 3 or 4 main factors to be extracted, explaining approximately 90% of the variation in the data characterising MP morphology. It was found that the first principal component for granules, flakes and films was largely represented by strongly correlated with 2D shape descriptors (area, perimeter, equivalent area diameter) and 3D shape descriptors (CSF, Compactness, Dimensionality). Considering the scraps, PC1 was represented by only five of the above descriptors, and the Compactness variable had the largest contribution to PC2. In addition, for granules, flakes and films, a relationship between 2D shape and the colour of their particles could be observed. For the most numerous MP group identified of multicoloured scraps, no such association was found. The results of our study can be used for further multivariate analysis regarding the presence of microplastic floating on the river surface, with a particular focus on particles of secondary origin. This is of key importance for optimising future efforts in conducting small-scale and multidimensional monitoring of and reducing plastics in the aquatic environment.

This study examines the relationship between firm-level and macroeconomic variables and stock prices (SP) in Iran, Saudi Arabia (KSA), and Iraq, where economic conditions are uncertain. The sample consists of all firms listed on these countries' stock exchanges between 2015 and 2019, yielding a comprehensive dataset from 154 Iranian firms, 82 KSA firms, and 33 Iraqi firms. Using a fixed effect model, intriguing relationships are uncovered between firm-level and macroeconomic factors on SP. The findings indicate that, at a 1% significance level, there is a strong link between Iran and Iraq's GDP and their respective SP. In KSA, the association between GDP and SP is positive and significant at a 5% level. In addition, there is a positive and statistically significant correlation between the inflation rate and SP in all three countries. Moreover, the association between exchange rates and SP is significant and positive in KSA and Iraq but negative and significant at the 1% significance level in Iran. Furthermore, in KSA, the connection between oil prices and SP is positive and significant, whereas, in Iran, the relationship is negative at the 1% level. Surprisingly, there is no association between the price of oil and Iraqi SP. Regarding intangible assets, their impact on SP in Iran and KSA is negligible. In Iraq, however, there is a negative and significant relationship at the 5% level, indicating that intangible assets have a detrimental impact on SP. These findings highlight the complex link among macroeconomic factors, intangible assets, and SP in the examined countries. Policymakers and governments should prioritize implementing measures to foster sustainable economic growth, manage inflation, and stabilize exchange rates. These actions can boost investor confidence and contribute to the stock market's overall development.

In the foodservice industry, clients judge not only the product standard but also the service quality they receive during their restaurant experience. Therefore, when the importance of the dining experience is strongly regarded by consumers in terms of intellectual and motivational attributes, they are happier to suggest the establishment to others. The main objective of this research is to study the influence of different service quality factors in restaurants and their impact on customer satisfaction. This research is also undertaken to evaluate the identification of important factors for the restaurant industry and the levels of service quality among customers satisfaction with the services offered by restaurants in India. As factor analysis, correlation, and regression research, this study was conducted using a modified IBM SPSS Statistics 24 and AMOS instrument among the 630 randomly selected customers. A weighted mean was used to describe the levels of service quality and customer satisfaction. Multiple regressions were used to determine the predictors of customer satisfaction. The results reveal the main 12 service quality factors, which are: 1. Process-related factors: system for take-away orders, order tracking system, and time for food preparation 2. People-related factors: focus on customers' special requests, peer group influence, and making you feel special. 3. Physical Environment: Walking Space, Architecture of the Restaurant, and Signals for Direction 4. Performance-related factors: food served at an appropriate temperature; food presentation; portion size of food in the restaurant. The researchers have developed one model on service quality factors that is described in the research paper.

Tourmalines are a group of minerals which may concentrate various accessory components, e.g. Cu, Ni, Zn, Bi, Ti, Sn. The paper presents fluor-elbaite and elbaite from a dyke of the Julianna pegmatitic system at Piława Górna, at the NE margin of the Bohemian Massif, SW Poland, containing up to 6.32 and 7.37 wt.% ZnO, respectively. Such high amounts of ZnO are almost two times higher than in the second most Zn-enriched tourmaline known to date. The compositions of the Zn-rich tourmalines from Piława Górna, studied by electron microprobe and Raman spectroscopy, correspond to the formulae: (Na0.73Ca0.01•0.25)Σ1(Al1.03Li0.79Zn0.76Fe2+0.33Mn0.09)Σ3Al6B3Si6O27(OH)3(F0.66OH0.34), and (Na0.78Ca0.01•0.21)Σ1(Al1.06Li0.87Zn0.88Fe2+0.10Mn0.09)Σ3Al6B3Si6O27(OH)3(OH0.84F0.16), respectively, with Zn as one of the main octahedral occupants. A comparison with other tourmalines and associated Zn-rich fluor-elbaite and elbaite from the pegmatite indicates that atypically high Zn-enrichment is not a result of Zn-Fe fractionation, but dissolution and reprecipitation induced by a late (Na,Li,B,F)-bearing fluid within the assemblage of gahnite spinel and primary schorl-type tourmaline. This strongly suggests Na-Li-B-F metasomatism of gahnite-bearing mineral assemblages as that is the only environment that can promote crystallization of a hypothetical Zn-dominant tourmaline. The compositions of the Zn-rich fluor-elbaite and elbaite suggest three possible end-members for such a hypothetical tourmaline species: NaZn3Al6B3Si6O27(OH)3(OH), •(Zn2Al)Al6B3Si6O27(OH)3(OH) and Na(Zn2Al)Al6B3Si6O27(OH)3O.

A traditionally salient topic of empirical investigation in the sociology of religion, this paper seeks to offer a recent investigation into the intergenerational transmission of religion and the parental forms of religious engagement that predict adult engagement with religion. The study of this paper explores the intergenerational transmission of religion, focusing on the parental forms of religious identity and engagement that influence religious identity, beliefs, and practices in adulthood. By analyzing the 2018 GSS dataset in the United States with multiple regression analyses, I find strong parental and childhood influences on adult religiosity, religious service attendance, and belief in God. Indeed, this engagement often mirrors parental engagement for these variables. However, while paternal religious identity often predicts these religious variables, I find that the religious identity and engagement of parents generally does not predict religious identity in adulthood. Ultimately, while these results generally show strong predictive mechanisms of intergenerational transmission, they also illustrate that these relationships are variably dependent on the form of parental and adult religious engagement and which parent participates or is associated with that engagement.

Chemical and mechanical properties of plasma-assisted nitrided (PAN), TiN cathodic arc coated, and PAN with TiN coated samples were thoroughly evaluated on tool steel samples of 1.2379. The evaluation involved SEM, nano-indentation, profilometer, micro scratch, and corrosion tests. The results revealed that PAN treatment alters the roughness of the surface, while it has minimal impact on the coefficient of friction. However, it increases the substrate's hardness, making it twice as hard and three times more resilient against scratch tests, along with improved corrosion resistance. TiN-coated samples are four times harder than untreated ones, but they exhibit a higher elastic modulus (E), leading to a lower H/E index. The most promising results were obtained with PAN+TiN treatment, combining high hardness (H) with lower E, resulting in a high H/E index, a crucial criterion for wear resistance. These samples also demonstrated superior scratch hardness and corrosion resistance, despite being thinner and rougher.

Petrochemicals and oil refineries are industrial processes that use compounds and polymers derived directly or indirectly from natural gas or crude oil for chemical purposes. They have posed a number of short- and long-term risks to the environment and the people who live nearby. The study aims to determine how the presence of industrial areas, such as oil refineries, affects the local population's perception of their surroundings. The investigation centers on the Tehran Oil Refinery, a major refinery hub, and its perceived environmental impact. For this purpose, a Geographic Information System for Public Participation (PPGIS) covering three basic sections has been designed: socio-demographic information of the participants; self-perceived health; and landscape valuation before and after an intervention. The main observations show a complex interaction between industrial presence and the perception of landscape values. Participants' reactions to the manipulated Photographs reveal important details about the psychological impact of visual elements on emotional perception. There is also a direct relationship between the level of stress and emotional perception in the manipulated and original photos.This research adds to the larger debate about the effects of industrialization on the environment and society. It emphasizes the importance of considering public perception when planning and developing industrial projects. The goal is to strike a balance between industrial operational needs and environmental quality preservation, resulting in long-term urban growth.

Heat transfer enhancement and hydrodynamic characteristics of nanofluid use in a micro heat exchanger is investigated for cooling electronic components working in hot climatic conditions. The cooling fluid employed was water and TiO2 nanoparticles at concentrations of 1% and 5%, Reynolds numbers ranged from 400 to 2000, and inlet temperatures ranged between 35ºC and 65ºC. At a nanofluid inlet temperature of 55ºC and a nanoparticle concentration of 1%, the Nusselt number increased by 23% up to 54% as the Reynolds number varied between 400 and 2000. At a nanoparticle concentration of 5%, the percentages which correspondingly enhanced the Nusselt number were 32% and 63%. The temperature of the electronic heating component decreased by 4.6-5.2ºC when the nanofluid concentration was increased from 0 to 5% at a Reynolds number of 400 and a nanofluid inlet temperature of 35ºC. Small increments in pressure drop of about 6% and 13% were observed at nanofluid concentrations of 1% and 5%, respectively. With nanoparticle concentrations of 1% and 5%, a Reynolds number of 2000 and a nanofluid inlet temperature of 35ºC, performance evaluation criterion (PEC) values of 1.36 and 1.45 were obtained. When the nanofluid inlet temperature was increased to 65ºC, the PEC parameter decreased to 1.02-1.10 for both concentrations.

Background: The important periodontal disease pathogen Porphyromonas gingivalis produces large biofilms that increase its pathogenicity. Finding natural antimicrobial agents is crucial because of the rise in antibiotic resistance. Objective: The purpose of this study was to determine if plant extracts such as Symphytum officinale (S) and Panax ginseng (G) were effective against P. gingivalis separately and in combination with a common antibiotic Metronidazole (F). Materials and Procedures: Six different dilutions were produced the plant extracts and antibiotic separately and in combination with G and F and S and F using two-fold serial dilution technique. To evaluate the effects of these substances biofilm inhibition experiments were conducted. Plaque samples were collected from periodontitis patients to isolate P. gingivalis and standard strain of P. gingivalis (ATCC 33277) were bought. Additionally, Acylated Homoserine Lactones (AHLs) detection was carried out to look for any activity that would interfere with quorum sensing. GraphPad prism was used for statistical analysis with p value < 0.05. Results: The combinations of Symphytum Officinale and Metronidazole (S+F) showed the maximum effectiveness in biofilm inhibition (98.7%), which was better than G+F (98.2%) with substantial variations in biofilm inhibition levels in different treatment regimes. Notably, the isolate from the patient was more active than the standard strain. Additionally, the plant extracts and their combinations at particular dilutions had notable inhibitory effects on the generation of AHL (p <0.05). Conclusion: The study highlights the possibility of Symphytum Officinale and Panax Ginseng as effective treatments for P. gingivalis biofilm and AHLs, both on their own and in combination with Metronidazole. These organic substances may open the door to cutting-edge methods of treating periodontal disorders.

(1) Background: The purpose of this study is to evaluate the full arch scan accuracy (precision and trueness) of nine digital intra-oral scanners and four lab scanners. Previous studies have compared the accuracy of some intra-oral scanners, but as this is a field of quickly developing technologies, a more up-to-date study was needed to assess the capabilities of currently available models.; (2) Methods: The present in vitro study compared nine different intraoral scanners (Omnicam 4.6; Omnicam 5.1; Primescan; CS 3600; Trios 3; Trios 4; Runyes; i500 and DL206) as well as four lab light scanners (Einscan SE; 300e; E2 and Ineos X5) to investigate the accuracy of each scanner by examining the overall trueness and precision. Ten aligned and cut scans from each of the intra-oral and lab scanners in the in vitro study were brought into CloudCompare. A comparison was made with the master STL using the CloudCompare 3D analysis best-fit algorithm. The results were recorded along with individual standard deviation and a colorimetric map of the deviation across the surface of the STL mesh; a comparison was made to the master STL, quantified at specific points. ; (3) Results: In the present study, the Primescan had the best overall trueness (17.3 ± 4.9). Followed by (in order of increasing deviation) the Trios 4 (20.8 ± 6.2), i500 (25.2 ± 7.3), CS3600 (26.9 ± 15.9), Trios 3 (27.7 ± 6.8), Runyes (47.2 ± 5.4), Omnicam 5.1 (55.1 ± 9.5), Omnicam 4.6 (57.5 ± 3.2) and Launca DL206 (58.5 ± 22.0). Regarding the lab light scanners, the Ineos X5 had the best overall trueness with (0.0 ± 1.9). Followed by (in order of increasing deviation) the 3Shape E2 (3.6 ± 2.2), Up3D 300E (12.8 ± 2.7), and Einscan SE (14.9 ± 9.5); (4) Conclusions: This study confirms that all current generations of intra-oral digital scanners can capture a reliable, reproducible full arch scan in dentate patients. Out of the intra-oral scanners tested, no scanner produced results significantly similar in trueness to the Ineos X5. However, the Primescan was the only one to be statistically of a similar level of trueness to the 3Shape E2 lab scanner. All scanners in the study had mean trueness of under 60-micron deviation. While this study can compare the scanning accuracy of this sample in a dentate arch, the scanning of a fully edentulous arch is more challenging. The accuracy of these scanners in edentulous cases should be examined in further studies.

Currently Single Board Computers (SBCs) are sufficiently powerful to run Real-Time Operating Systems (RTOSs) and applications with real-time attributes and requirements. SBCs serve as a foundation in Industrial Internet of Things (IIoT). The NXP Semiconductors produces a series of SBCs based on ARM-processors for a variety of industrial applications. The continuous increase in real-time data generated by IoT devices adds further research issues about the efficiency of such systems and applications. The purpose of this research was to investigate the timing performance of an NXP TWR-K70F120M device with μClinux OS on running concurrently tasks with real-time features and constraints. A custom-built multithreaded application with specific compute-intensive sorting and matrix operations was developed and applied to obtain measurements in specific timing metrics, including task’s execution time, threads waiting time, and response time, under different threads variations. The performance of this device was additionally benchmarked and validated against favorite platforms, a Raspberry Pi4 and BeagleBone AI SBCs. The experimental results showed that this device stands well both in terms of timing and efficiency metrics. Execution times were quite lower than the others, by approximately 56% in the case of two threads, and by 29% in the case of thirty-two threads configurations.

This work attempted to fabricate superhydrophobic fabric via simple immersion technique. Textile fabrics were coated with silica nanoparticles prepared from tetraethoxysilane (TEOS) to obtain sufficient roughness with hydrophobic surface chemistry. Then the coated fabrics were treated with polydimethylsiloxane (PDMS) and aminopropyltriethoxysilane (APTES) to reduce the surface energy. The effects of PDMS concentration on the surface morphology and superhydrophobicity of as-prepared fabric were investigated. The morphology and the composition of superhydrophobic fabric was characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDS) and Fourier transform infrared (FTIR) spectroscopy. The results revealed the formation of spherical silica nanoparticles with average particle size of 250 nm throughout the fabric surface. The possible interactions between silica nanoparticles and APTES, as well as the fabrics were elucidated. Investigating the hydrophobicity of fabrics via water contact angle (WCA) measurement showed that the treated fabric exhibits excellent water repellency with a water contact angle as high as 151° and a very low water sliding angle. It also found that the treated fabric maintained most of its hydrophobicity against repeated washing. The comfort properties of the obtained superhydrophobic fabrics in term of air permeability and bending length did not reveal any significant changes.

The information on the land use and soil conservation practice based on year 2006, 2010 and 2014, hence offering an opportunity to model the impacts of land use change on erosion, deposition and surface water runoff. Limitation in the use of hydrological models had been their inability to handle the large amount of input data that describe the heterogeneity of the natural system. In this study, a procedure that takes into account soil conservation practice based on the land use change, the response of soil erosion and sediment export from the George Town Conurbation catchment area, and average annual sediment yields were estimated for each grid cell of the watershed to identify the critical erosion areas of rural and urban planning proposes. Average annual sediment yield and data on a grid basis estimated using Universal Soil Loss Equation (USLE) and an emerging technology represented by Geographic Information System (GIS) used as a tool to produce a map for erosion rate. The changing of the land use from forest to agriculture and then to an urban area is a challenging task to research on land use demand for population, and environmental impact assessment is important for the planning of natural resources management, allowing research the modification of land use properly and implement more sustainable for long term management strategies. The challenge is to formulate strategies that would promote an integrated approach to the land use planning at an appropriate level as to address the issues that arose. Modelling for creating urban growth boundary for the George Town Conurbation must have to be controlled surface runoff and soil loss and sediment export from land use of the George Town Conurbation catchment.

This article raise a topic of critical examination of polypropylene, a key polymeric material, and its extensive application within the automotive industry, particularly focusing on the manufacturing of brake fluid reservoirs. The study aims to enhance the understanding of polypropylene's behavior under mechanical stresses through a series of laboratory destruction tests and numerical simulations, emphasizing the Finite Element Method (FEM). A novel aspect of this research is the introduction of the PEAK parameter, a groundbreaking approach designed to assess the material's resilience against varying states of strain, known as triaxiality. This parameter facilitates the identification of critical areas prone to crack initiation, thereby enabling the optimization of component design with a minimized safety margin, which is crucial for cost-effective production. The methodology involves conducting burst tests to locate crack initiation sites, followed by FEM simulations to determine the PEAK threshold value for the Sabic 83MF10 polypropylene material. The study successfully validates the predictive capability of the PEAK parameter, demonstrating a high correlation between simulated results and actual laboratory tests. This validation underscores the potential of the PEAK parameter as a predictive tool for enhancing the reliability and safety of polypropylene automotive components. The research presented in this article contributes significantly to the field of material science and engineering by providing a deeper insight into the mechanical behavior of polypropylene and introducing an effective tool for predicting crack initiation in automotive components. The findings hold promise for advancing the design and manufacturing processes in the automotive industry, with potential applications extending to other sectors.

Introduction: The term 3D printing is commonly used to depict an assembling method whereby the final form of an object is the result of the addition of different layers to build the frame of an object. This procedure is more accurately portrayed as additive manufacturing and is likewise alluded to as fast prototyping. The term 3D printing, in any case, is generally new and has been an active part of current developments in Dentistry. Much publicity encompasses the evolution of 3D printing, which is hailed as an innovation that will perpetually change CAM manufacturing, including in the dental sector. This review is the first part in a 3D Printing series that looks at the history of 3D Printing, the technologies available and reviews the literature relating to the accuracy of these technologies. Conclusions: The recent advancement in digital dentistry to incorporate these tools has modernised dental practices by paving the way for computer-aided design (CAD) technology and rapid prototyping. The use of 3D printing has led to 3D digital models produced with intraoral scanners (IOS), which can be manipulated easily for diagnosis, treatment planning, mockups, and a multitude of other uses. Combining 3D Printing with a 3D intraoral scan eliminates the need for physical storage but makes it to retrieve a 3D models for use within all dental modalities.

In this paper a protection scheme is provided to protect microgrid by considering the problems that are generated by addition of distributed generators to distribution networks and change these networks from passive to active. At first, changes in microgrid conditions that can affect short-circuit current is explained. Then Based on these changes, an algorithm is proposed to update relays settings. The algorithm can be used for both instantaneous and inverse time relays. In this protection scheme, central unit has no place and relays are responsible for monitoring microgrid and update their settings. In other words, this protection scheme is an adaptive and decentralized microgrid protection scheme. Instantaneous overcurrent relays are used in this paper. To avoid storing large amounts of setting data in relays memory, a method for calculating pickup current of instantaneous relay is provided. Since digital relays used, a new characteristic curve for instantaneous relay for better performance in the field of backup protection is defined. This new characteristic curve has two peakup currents: one of them for main protection and the other one for backup protection. Then coordination of instantaneous relay using the new characteristic curve is explained. At the end, this protection scheme is implemented on a microgrid.

Directed energy deposition (DED) parameters were determined for near-β alloy Ti-55511 by employing statistical design of experiments (DOE) methods. Parameters resulting in fully dense freeform deposits were identified using two sequential DOEs. Single laser tracks were printed with several laser power, traverse rate, and powder feed rate settings in an initial DOE to identify promising build parameters. Capture efficiency and effective deposition rate were used to characterize and rank the single track deposits. The best parameters were then used to print solid cube with various X-Y and Z-overlaps (different hatch spacing, HS, and layer thickness, ZS) in a second DOE. Suitable deposition parameters were selected based on cube density and microstructure and were used to fabricate larger tensile samples for mechanical testing. Multiple parameter sets were found to provide dense Ti-55511 deposits with acceptable mechanical properties and parametric models showed statistical significance.

Colpodella species are free-living opportunistic pathogens that cause human and animal infections and use ticks and flies as vectors. Trophozoite and cyst stages of Colpodella species can be distinguished from stages of the prey Parabodo caudatus using Sam-Yellowe’s trichrome staining. Colpodella species obtain nutrients by attaching to their prey, aspirating the prey’s cytoplasmic contents into a posterior food vacuole and encysting. It is unclear whether both trophozoite and cyst stages are present during infection. Molecular techniques identified Colpodella species in all reported infections. However, no morphological information was reported to aid life cycle stage identification in hosts. This review discusses the increased incidence of Colpodella infection in animals and in vectors and the need to identify stages used for transmission and pathogenesis. The potential for zoonotic infections through tick and fly bites is a public health concern. We previously used Sam-Yellowe’s trichrome staining to identify life cycle stages of Colpodella sp. In order to gain a better understanding of transmission and pathogenesis, identifying Colpodella life cycle stages in infected tissue and in vectors will provide important insights regarding nutrient uptake in hosts by determining whether attachment of trophozoites to host cells occurs, and identifying trophozoites and cysts in infected hosts.

Background: Lung cancer is one of the common causes of death worldwide. Although the incidence rate of lung cancer in Western countries is decreasing, it presents a growing trend in developed countries. Since there is no accurate enough information about the epidemiological and Histopathologic features of lung cancer in central Iran, Isfahan, we were motivated to conduct this research. Materials and Methods: This was a descriptive, cross-sectional study carried out in central Iran, Isfahan. All demographic, histopathological and clinical data of the lung cancer patients registered in MACSA, a referral charity-based cancer center in central Iran, was analyzed within 2012-2018 using SPSS v.22 software. Results: Altogether 260 patients with lung cancer were included in this study from 6127 cancer patients registered within 2012-2018 (4.2%). Out of them, 66.2% were men, and 18.8 % of the patients were alive at the time of the study. The mean age of the patients at diagnosis was 61.56 (SD=14.11, range: 9-93). Altogether, 63.1% of patients had metastasis of whom 57.6% were in stage IV at diagnosis. The Frequency of different types of lung cancer was 36.9% adenocarcinomas, 14.2% squamous cell carcinoma, 9.6% bronchogenic carcinoma and 8.1% small cell lung cancer, respectively. Altogether, 128 cases were smokers with an average 35.45 ± 14 pack- years. Only in 36.2% of the patients, the diagnostic and therapeutic biomarkers had been checked, and CK7 was positive in 88.9% of the cases in which the biomarker had been checked. Conclusion: Despite to similar Iranian studies, the most common histopathologic type of lung cancer among the patients was adenocarcinoma that it may be attributed to the lower consumption of smoking in our population and their different genetic context. Molecular biomarkers had been checked in a small portion of the patients. More education of the clinicians along with the development of cancer molecular testing may lead to promote the personalized-based approach.

The importance of vertical jump in sport fields and rehabilitation is widely recognized. Furthermore, Force-Time variables of vertical jump are factors affecting jumping height. Exclusive review of each of this variables, in eccentric and concentric phases, can lead to a specific focus on them during jumping exercises. So, the aims of his study were to a) reviewing the relationship between force-time curve variables of eccentric and concentric phases with jump height and b) description of this variables in Iran national youth volleyball players society. This is an observational study. 12 elite volleyball player (Male, Iran national youth volleyball players, 17±0.7 years) have participated in this study. Correlation between Force-Time variables - included peak force (PF), relative peak force (RPP), peak power (PP), average power (AP), relative peak power (RPP), and Modified Reactive Strength Index (MRSI) - in eccentric and concentric phases and ultimate jump height has been studied. Results showed that the average power (r=0.7) and relative peak force (r=0.75) of concentric phase and MRSI (r=0.83) have significant correlation with ultimate jump height (JH). Relative peak power and average power of concentric phase can massively effect Jump Height in sports like volleyball, which vertical jump is an integral part of them. Focus on both of these factors, which has been studied in this research, in training programs, can improve athlete jump performance significantly.

Worldwide the steel corrosion is one of the greatest deterioration problems for reinforced concrete structures. Comparing some literature experimental results with a complex FEM model, the present paper points out the principal aspects those characterize the static behavior of RC elements damaged by corrosion. Moreover, the non-dimensional abaci defined for some specific case studies finalized to the evaluation of the residual flexural strength of corroded elements highlight the dangerousness of the corrosion degradation if the failure of the element is governed by the steel

With the global increase of photovoltaic (PV) modules deployment in recent years, the need to explore and realize their reported failure mechanisms has become crucial. Despite PV modules being considered reliable devices, failures and extreme degradations often occur. Some degradations and failures can be minor and cause no critical harm if within the expected range. Others, may start mildly and then deteriorate faster to become catastrophic, especially in harsh environments. This paper conducts a state-of-the-art literature review to scan PV failures, types, and their root cause based on PV’s constructed components (from protective glass to junction-box). It outlines the hazardous consequences beyond PV module failures, describing what harm they can bring to the PV system. As we delve into the literature, it becomes clear that every component is vulnerable to certain types of failures; some can deteriorate within themselves, and others infect further PV components resulting in emerging more severe failures. In the end, the review briefly summarises PV failure detection techniques, emphasising electrical characterization techniques, and disclosing the need to engage more electrical parameters. Most importantly, this review can prepare the stage for the PV research community to identify the most prevalent degradation processes. This, in turn, encourages researchers to investigate them throughout modelling and experimental studies to forecast them at the early onset in order to protect the PV systems from hazardous malfunctions.

This paper examines hybrid threats to maritime transportation systems, and their governance re-sponses; focusing on the congested Straits of Malacca and Singapore (SOMS) as an illustrative case study. The methodology combines secondary sources with primary data from 42 expert in-terviews, a 30-respondent survey, and two maritime security roundtables. Key findings were that ships’ critical systems are increasingly interconnected, yet aging IT infrastructure and minimal cybersecurity awareness among crews heighten risks. Meanwhile, regional terrorist groups have previously targeted shipping and shown considerable skill in exploiting online tools, aligning with broader calls for jihadist violence. Further, opportunistic piracy persists in the SOMS with the po-tential to disrupt shipping. Experts confirmed maritime cybersecurity lags other critical infra-structure sectors and needs updated governance. Initial International Maritime Organization (IMO) guidelines lack specificity but revisions and updated IMO guidance are in process, while Port state implementation of maritime cybersecurity standards varies. Crucially, information sharing remains inadequate, even as recorded attacks increase. Findings underscore that although major hybrid incidents have not occurred, simulations and threat actors’ capabilities demonstrate potential for catastrophic collisions or cascading disruption in congested waterways. Mitigating factors like redundancy and crew training are deficient currently. Some alignment between SOMS states on maritime security cooperation exists, but not cyber threats specifically. Key recommen-dations include an anonymous cyber-attack reporting system, reinforced training and shipboard systems, and consolidated regional frameworks. Until these priorities are addressed, the analysis concludes that hybrid vulnerabilities in this vital global chokepoint remain a serious concern.

The main parameters for calculation of relative humidity are the wet-bulb depression and dry bulb temperature. In this work, easy-to-used predictive tools based on statistical learning concepts, i.e., the Adaptive Network-Based Fuzzy Inference System (ANFIS) and Least Square Support Vector Machine (LSSVM) are developed for calculating relative humidity in terms of wet bulb depression and dry bulb temperature. To evaluate the aforementioned models, some statistical analyses have been done between the actual and estimated data points. Results obtained from the present models showed their capabilities to calculate relative humidity for divers values of dry bulb temperatures and also wet-bulb depression. The obtained values of MSE and MRE were 0.132 and 0.931, 0.193 and 1.291 for the LSSVM and ANFIS approaches respectively. These developed tools are user-friend and can be of massive value for scientists especially, those dealing with air conditioning and wet cooling towers systems to have a noble check of the relative humidity in terms of wet bulb depression and dry bulb temperatures.

The clinical relationship between diabetes and inflammation is well-established. Various branches of science independently have confirmed that disrupting oxidant-antioxidant equilibrium and elevated lipid peroxidation could be a potential mechanism for chronic kidney disease associated with Type 2 diabetes mellitus (T2DM). Under diabetic condition, hyperglycemia, especially inflammation, and increased reactive oxygen species generation are bidirectionally associated. Inflammation, oxidative stress and tissue damage are believed to have a role in the development of diabetes. Although the exact mechanism underlying the oxidative stress and its impact on diabetes progression remains uncertain, the hyperglycemia-inflammation-oxidative stress interaction clearly plays a significant role in onset and progression of vascular disease, kidney disease, hepatic injury, pancreas damage and, therefore holds promise as a therapeutic target. Evidence strongly indicates that the use of multiple antidiabetic medications therapy fails to achieve the normal range for glycated hemoglobin target, signifying treatment resistant diabetes. Antioxidants with polyphenols are considered useful as adjuvant therapy for their potential anti-inflammatory effect and antioxidant activity. We aimed to analyze the current major points reported in preclinical in vivo and clinical studies of antioxidants in the prevention or treatment of inflammation in T2DM. Then, we will share our speculative vision of the future diabetes clinical trials.

In this paper, we proposed the fusion of two projection based face recognition algorithms: local binary Patterns in DCT domain and singular value decomposition (SVD) characterized by its simplicity and efficiently. Standard databases ORL are used to test the experimental results which prove that proposed system achieves more accurate face recognition as compared to individual method.

Studying Active Transportation (AT) is widespread in America and Europe's research and stud-ies that include Latent variables (LV) are growing to identify exact results of finding what to do to increase the utility of AT. LVs help us to have more accurate research. LVs are defined as psy-chological factors like feeling safe while you ride at night and thus they are not subjective and hard to understand but very important to increase the utility of using AT modes. In this study, most of the previous studies about bicycling have been reviewed. In this research, different var-iables including subjective and LVs are conducted for maximizing the use of bicycle utility and introduced to have better sight for future researchers to deal with modeling AT mode choice. Results represent the importance of having 'will' for using a bicycle, especially in difficult situa-tions and cultural barriers that affect the cycling of women.

Breast cancer is among the most common and fatal diseases for women, and no permanent treatment has been discovered. Thus, early detection is a crucial step to control and cure breast cancer that can save the lives of millions of women. For example, in 2020, more than 65% of breast cancer patients were diagnosed in early-stage of cancer, from whom all survived cancer. Although early detection is the most effective approach for cancer treatment, breast cancer screening conducted by radiologists is very expensive and time-consuming. More importantly, conventional methods of analyzing breast cancer images suffer from high false detection rates. Different breast cancer imaging modalities are used to extract and analyze the key features affecting diagnosis and treatment of breast cancer. These imaging modalities can be divided into subgroups such as mammograms, ultrasound, magnetic resonance imaging, histopathological images, or any combination of them. Radiologists or pathologists analyze images produced by these methods manually that leads to increase the risk of wrong decisions for cancer detection. Thus, utilization of new automatic methods to analyze all kinds of breast screening images to assist radiologists to interpret images is required. Recently, artificial intelligence (AI) has been widely utilized to automatically improve the early detection and treatment of different types of cancer, specifically breast cancer, thereby enhancing the survival chance of patients. Advances in AI algorithms, such as deep learning, and availability of datasets obtained from various imaging modalities have opened an opportunity to surpass limitations of current breast cancer analysis methods. In this article, we first review breast cancer imaging modalities, and their strengths and limitations. Then, we explore and summarize the most recent studies that employed AI in breast cancer detection using various breast imaging modalities. In addition, we report available datasets on the breast cancer imaging modalities which are important in developing AI-based algorithms and training deep learning models. In conclusion, this review paper tries to provide a comprehensive resource to help researchers working in breast cancer imaging analysis.

Population growth and increasing global demand for freshwater have raised a serious challenge for the depleting sources of freshwater in the 21st century. Desalination technologies can be a reliable technique for providing freshwater. Capacitive deionization is one of the innovative desalination methods that has received increasing interest. Flow-electrode capacitive deionization (FCDI) (a new architecture of capacitive deionization) is one of the efficient, cost-effective, and environmentally-friendly desalination methods for freshwater production. In this experimental research, the performance of an FCDI system was investigated and the influence of important parameters such as flow rate of flow-electrodes, electrolyte salt concentration of flow-electrodes, and initial feed water concentration will be assessed on the efficiency of desalination operation. In this study, the flow-electrodes operated in short-circuited closed-cycle operation (SCC) mode, and also the feed water operated similarly to the flow-electrodes in closed-cycle. Moreover, in all the experiments, the salt adsorption capacity (SAC) and salt removal efficiency (SRE) was calculated. Herein, by optimizing the above mentioned parameters, the salt removal efficiency of 83% and a SAC value of 29.12 mg/g dry carbon were achieved in 5 hours.

In large infrastructures such as dams, which have a relatively high economic value, ensuring the proper operation of the associated hydraulic facilities in different operating conditions is of utmost importance. To ensure the correct and successful operation of the dam's hydraulic equipment and prevent possible damages, including gates and downstream tunnel, to build laboratory models and perform some tests are essential (the advancement of the smart sensors based on artificial intelligence is essential). One of the causes of damage to dam bottom outlets is cavitation in downstream and between the gates, which can impact on dam facilities, and air aeration can be a solution to improve it. In the present study, six dams in different provinces in Iran has been chosen to evaluate the air entrainment in the downstream tunnel experimentally. Three artificial neural networks (ANN) based machine learning (ML) algorithms are used to model and predict the air aeration in the bottom outlet. The proposed models are trained with genetic algorithms (GA), particle swarm optimization (PSO), i.e., ANN-GA, ANN-PSO, and ANFIS-PSO. Two hydrodynamic variables, namely volume rate and opening percentage of the gate, are used as inputs into all bottom outlet models. The results showed that the most optimal model is ANFIS-PSO to predict the dependent value compared with ANN-GA and ANN-PSO. The importance of the volume rate and opening percentage of the dams' gate parameters is more effective for suitable air aeration.

In this paper, an offshore airborne wind energy (AWE) farm consisting of three non-reversing pumping mode AWE systems is modelled and simulated. The AWE systems employ permanent magnet synchronous generators (PMSG). A direct interconnection technique is developed and implemented for AWE systems. This method is a new approach invented for interconnecting offshore wind turbines with the least number of required offshore-based power electronic converters. The direct interconnection technique can be beneficial in improving the economy and reliability of marine airborne wind energy systems. The performance and interactions of the directly interconnected generators inside the energy farm internal power grid are investigated. The results of the study conducted in this paper, show the directly interconnected AWE systems can exhibit a poor load balance and significant reactive power exchange which must be addressed. Power control strategies for controlling the active and reactive power of the AWE farm are designed, implemented, and promising results are discussed in this paper.

The access to agricultural information in Sudan continues to be challenging to farmers due to use of inadequate sources and traditional extension approaches. The rapid growth of smart-mobile phones usage in developing countries resulted in several advantages compared to other alternatives in term of costs, geographic coverage and ease of use. This research was conducted in North Kordofan Sate to explore the role of smart-mobile phone in accessing agricultural information. Primary data were obtained by structured questionnaires and focus group discussion through participatory rural appraisal and observation while secondary data were collected from scientific journals, books and authenticated web sources. A number of 230 respondents (10% from total farmers) were interviewed and five focus group discussions were done. Statistical Packages for Social Science (SPSS) version 22 was used to analyze the data with aid of descriptive statistics and Chi-squire Test. The result indicated that most of the respondents fall in age group between 21-40 years, and they depend on farm activity. There was 90% of farmers processed mobile phone since more than three years ago, 90.8%continuedto use smart mobile phone to access agricultural information and showed positive contribution towards income generation. The results also revealed that there was positive perception towards using mobile phones which showed more efficient in use than radio and TVs. The results showed great advantages of using smart mobile phone where 75.2 % of respondents preferred to get agricultural information, logistics and other needs through successful communication in the mid of agricultural season. Results of Chi-squire test showed significant differences between the parameters tested. The study recommended that farmers should be connected with mobile phones to admit ease communication with agricultural extension offices and quick access to their needs and logistics.

Blood has certain significant physical properties, which the authors investigated. This paper provides values of surface tension and viscosity of blood at 37 °C, as well as relationship between them plotted on a cross-plot. By applying Hagen- Poiseuille equation and Jurin's law to the experimentally obtained data, the authors calculated with great accuracy viscosity and surface tension of blood. Evaluating both of the properties using described methods required from the authors to know the density of investigated liquid, which was found to be on average $\rho=1063,56 \frac{kg}{m^3}$. The authors took blood samples from 30 healthy subjects and determined aforementioned physical properties. There has been made a distinction in regard of a sex of the blood donor. Results indicate that both surface tension and viscosity are independent from sex of a subject, as well as indicate that there is no correlation between viscosity and surface tension of blood at 37\degree C. Average values of surface tension and viscosity were found to be $\sigma=5,241\pm 0,262 \cdot 10^{-2}\frac{J}{m^2}$ and $\eta=3,352\pm0,360 \cdot 10^{-3} Pa \cdot s$, respectively.

This research focusing on the environmental impact of tire and brake pad wear constitutes a significant area of transport-related studies. These two key vehicle components are not only the most frequently worn, but also generate micro and nano pollutants (i.e., rubber, metal oxides) that potentially harm the environment. Over half of the globally produced natural and synthetic rubbers, which amounted to about 30 million tons in 2022, are used for tire production. According to Wagner et al.'s research, over 1.3 million tons of such particles are released due to wear and tear in the European Union alone. This work focuses on examining snow deposits from various locations in an urban agglomeration (Poznan, Poland) in the winter season. FT-IR and NMR spectroscopic studies, optical and electron scanning microscopy SEM-EDS, and particle size studies using the DLS technique were conducted for a detailed characterization of pollutants in the environment. The conducted particle separation methods allowed for the extraction of a fraction mainly containing gum residues with particle sizes less than 2 µm. The results of these studies are crucial for understanding the impact of vehicle part exploitation on the environment.

Green spaces localized in cities create favourable environmental conditions for Ixodes ricinus, the most widespread and important vector of tick-borne pathogens in Central Europe. In this study, we described the prevalence of Borrelia burgdorferi s.l. and Babesia species found in mono- and double infections among I. ricinus ticks occurring in urban areas of the city of Poznań, west-central Poland. Two tick groups were examined: (i) a group of 1,029 host-seeking ticks (460 nymphs, 289 females, and 280 males and (ii) a group of 1,268 engorged female ticks removed from 1,115 tick-infested animals, dogs and cats. The overall prevalence of B. burgdorferi s.l. found in host-seeking ticks was almost two-fold higher in comparison to ticks derived from pets (8.7 vs. 4.7%, respectively, χ2 test, P = 0.001). Borrelia afzelii and B. garinii were the most prevalent species both in ticks from vegetation (3.7% and 3.7%, respectively) and from pets (3.7% and 0.6%, respectively). Babesia infections were slightly more common in feeding ticks compared to those from vegetation (6.0 vs. 4.7%, respectively), however, the difference was not significant. Three Babesia species including Ba. microti, Ba. venatorum and Ba. canis were identified. Babesia canis and Ba. microti were the most prevalent in host-seeking (2.6% and 1.4%, respectively) and feeding ticks (2.8% and 2.2%, respectively), whereas Ba. venatorum was the rarest piroplasm. All Ba microti obtained sequences (n=42) were identical to Ba. microti genotype "Jena/Germany" that is considered as pathogenic to humans. Furthermore, the sequences of Ba. venatorum (n=17) were identical with those isolated from patients in Italy, Austria and Poland. Altogether, out of 121 Babesia-positive ticks, 19.8% were simultaneously infected with B. burgdorferi s.l. spirochetes. We found similar prevalences of co-infections in host-seeking (1.1%) as well as in feeding ticks (1.0%). In the first group, Ba. canis prevailed in coinfections (73%), mostly with B. afzelii and B. garinii, in the second group, Babesia microti dominated with B. afzelii (92.7%). This is the first finding documenting the co-occurrence of both pathogens in ticks from companion animals. The detection of Ba. microti and Ba. venatorum sequences identical to strains pathogenic to humans as well as predominance of LB spirochetes, B. afzelii and B. garinii in I. ricinus from vegetation and animals indicates that there is a potential risk of acquiring human babesiosis and/or Lyme borreliosis in urban areas of the city of Poznań. Although, the overall risk of encountering a Ba. microti and B. burgdorferi s.l. co-infected tick was low (1.0%), the potential for more severe clinical symptoms and complications deserves notice. A relatively high infection rates of Ba. canis in dog-derived ticks (3.2%) and in host-seeking ticks (2.6%), suggests that I. ricinus could potentially be involved in the circulation of this piroplasm in areas, where the competent vector, Dermacentor reticulatus is absent or rare.

Leadership performance by village leaders is essential to promote sustainable life among rural communities, especially fisheries community who living along coastal villages. Otherwise, previous studies found that performance issues among village’s leaders remain as serious problems, and need to find the best solution. This study was conducted to profile the job performance among village leaders based on demographic factors such as educational level, age and experiences as village leader. The data of this cross-sectional survey were collected by questionnaires on 300 respondents consist of members of village organization through stratified sampling’s technique, while the data was analysed by SPSS using items of mean, standard deviation, independent-sample t-test and anova. The finding shown that there were differences in job performance among village leaders on educational level, age and experiences. Interestingly, the finding told the best on job performance among village leaders are (i) the age between 41 to 50 years old; (iii) the experience between 11 to 20 years; and (iii) the higher educational level the higher job performance among them. This result can be using by government or any responsible parties to improve job performance among village leaders, especially for recruitment selection and for in-service training.

Recent studies indicated that Plasmodium vivax can infect Duffy-negative individuals, but the varied diagnostic and methodological approaches have limited our ability to characterize P. vivax across Africa. Here, we utilized a standardized approach to compare epidemiological and genetic attributes of P. vivax from Botswana, Ethiopia, and Sudan, where Duffy-positive and Duffy-negative individuals coexist. Among 1,215 febrile patients, the proportions of Duffy negativity range from 20-36% in East Africa to 84% in Southern Africa. Considerable differences were observed in P. vivax prevalence among Duffy-negative populations ranging from averaged 9.2% in Sudan to 86% in Botswana. P. vivax parasite density in Duffy-negative infections is significantly lower than in Duffy-positive infections. Phylogenetic analyses of 229 PvDBP sequences indicated that Duffy-negative P. vivax were not monophyletic but occurred in multiple well-supported clades, suggesting independent origins. Duffy-negative Africans are clearly not resistant to P. vivax and the public health significance should no longer be neglected.

The paper presents research results on biocomposites made from a combination of extruded apple pomace (EAP) and potato starch (SP). The products were manufactured by hot pressing using a hydraulic press with a mold for producing samples. The prepared biocomposites were subjected to strength tests, surface wettability was determined and color analysis was carried out. Thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and cross section observed in Scanning electron microscope (SEM) were also performed. The obtained test results showed that the combination of apple pomace (EAP) and starch (SP) enabled the production of compact bicomposite materials. At the same time, it was found that each increase in the share of starch in the mixture for producing biocomposites increased the strength parameters of the obtained materials. With the highest share of starch in the mixture, 40%, and a raw material moisture content of 14%, the material had the best strength parameters and was even characterized by hydrophobic properties. It was also found that materials with a high content of starch are characterized by increased temperature resistance. Analysis of SEM microscopic photos showed well-glued particles of apple pomace, pectin, gelatinized starch and a smooth external structure of the samples. Research and analyzes have shown that apple pomace reinforced only with the addition of starch can be a promising raw material for the production of simple, biodegradable biocomposite materials.

Determining the vibration environment is crucial to analyzing a design of any mechanical system, especially such dynamic systems as sounding rockets. Accuracy of measurement using accelerometers could be improved by application of mechanical vibration filtering and amplifying devices. This work presents a theoretical description of a tunable filter and amplifier. Principle of work is provided as well as results from application of the device on a sounding rocket are provided. It is shown that implementation of such devices allowed for enhancing the accuracy of acceleration measurements. Conclusions on future implementations are also provided.

The current study focused on reviewing the rapid growing of using magnetic water in different fields of science and measure the influence of several intensities of magnetization on the chemical and electrical properties of tap water treated by reverse osmosis. The work includes circulation of water for 24 h. in magnetic fields of intensity 500, 1000, 1500, and 2000 G. The magnetization of water causes increasing some positive and negative ions in water such as (Mg, K, Na, Cl¯, Alkaline and SiO₂) and decreasing some positive and negative ions (Ca and SO₃). In the near future, the application of concepts of sustainability development in civil engineering have the to produce structures in harmony with these concepts through using of high-performance materials with less impacts on the environmental and have low cost. The main application of using magnetic water is improvement the geotechnical properties of soil through precipitation of calcite which increases the bond between soil particles and then strength of soil.

The Planning and implementation of construction projects are difficult processes and are burdened with many risk elements. The budget spread over time, which is developed on the basis of the schedule, presents the expected distribution of costs throughout the duration of the works, which during the implementation of the project is subject to constant changes resulting from time, cost and organizational factors. Managing construction contracts requires managers to be able to analyze on an ongoing basis the variances of production costs - from the values calculated in the offer cost estimate and assumed in the Budgeted Cost of Work Scheduled. The article attempts to analyze the emerging time and cost deviations using proprietary T/S and T/C monitoring, based on simple indicators of the EVM method. An example of construction of a multi-family housing development was used to study the variances of planned and incurred costs.

Bladder cancer (BC) is one of the most lethal genitourinary malignancies owing to its propensity for recurrence and poor survival. The biochemical pathway, signal transducer and activator of transcription 3 (STAT3), has gained significance as a molecular pathway that promotes proliferation, invasion, and chemoresistance. In this study, we explored the targeting of STAT3 with TTI-101 and SH5-07 in bladder cancer (BCa) and elucidated the mechanisms in three-dimensional (3D) spheroid and tumoroid models. We optimized the growth of spheroids from human, rat, and mouse BCa cell lines (J82, NBT-II, and MB49, respectively), and tumoroids from BBN (N-butyl-N-(4-hydroxybutyl)-nitrosamine) induced rat bladder tumors. Cell viability was assessed using MTT and trypan blue assays. ATP production, ROS production, and calcium AM (CA)/EtBr staining were used to measure the spheroid and organoid inhibition and mitochondrial function. Western blot analysis was performed to evaluate the pharmacodynamic markers involved in cell proliferation, apoptosis, cancer stem cells (CSCs), and STAT3 signaling in BCa. We found that targeting STAT3 (using TTI-101 and SH5-07) significantly reduced the proliferation of BCa spheroids, and tumoroids, which was accompanied by decreased expression of pSTAT3, Cyclin D1, and PCNA. Our data also demonstrated that treatment with STAT3 inhibitors induced ROS production and cell death in BCa spheroids and organoids. STAT3 inhibition induced cell death was associated with the activation of caspase 3/7 and PARP cleavage. Moreover, TTI-101 and SH5-07 targets cancer stem cells by downregulating the expression of CD44 and CD133 in 3D models. This study provides the first evidence for the prevention of bladder cancer with small-molecule inhibitors TTI101 and SH5-07 via suppression of CSCs and STAT3 signaling.

The addition of prebiotics is one of the most important ways to improve the techno-functional properties of bread. In this study, the effects of resistant starch, polydextrose, and inulin on the wheat flour, dough, and bread properties were investigated. In farinography results, resistant starch significantly increased the development time (2:18) with a boosting effect, but polydextrose (1:48) and inulin (1:36) weakened the dough (P <0.05). Inulin, polydextrose, and resistant starch had the most effect on reducing water absorption (40, 43.2, and 48.9) respectively (P <0.05). According to extensography data, inulin had the best result in baking compared to other polysaccharides. In terms of baked breads, samples containing resistant starch had high moisture that could be due to starch gelatinization and moisture-retaining, which delays the staling process of bread. Inulin, polydextrose, and resistant starch prebiotic ingredients affected dough rheological properties and bread quality, and organoleptic characteristics, however, resistant starch was the best.

This feature study attempts on setting a granules involving mesoscopic matter-aggregation context as a problem of passing locally by the matter-aggregating system from classical stochastic (mesoscopic limit) to a quantum description (nanoscale quantum-size effect limit). A d-dimensional entropy-production aggregation of the granules-involving matter is considered in terms of a (sub)diffusive realization. It turns out that when taking a full d-dimensional pathway of the aggregation toward the nanoscale, one is capable of disclosing a Heisenberg type (diffusional) relation, setting up an upper uncertainty bound for the (sub)diffusive very slow granules-including environment that matches the quantum limit of h/2pm (m– average mass of a granule; h – the Planck’s constant) for the diffusion coefficient of the aggregation, likely first proposed by Fürth in 1933, and qualitatively foreseen by Schrödinger some years before, both in the context of a diffusing particle cluster. The classical-quantum passage uncovered here, also termed insightfully the quantum-size effect (as borrowed from the quantum dots’ parlance), works properly for the three-dimensional (d=3) case, making use of a substantial physical fact that the (nano)granules interact readily via their surfaces with the also granular surroundings in which they are immersed. This natural observation is embodied in the basic averaging construction of the diffusion coefficient of the aggregation of interest. Certain, possibly biomedical, applications of the model can also be viewed by prospective inspection of tiny inhomogeneities in nanofibrillar and/or lamellar matter for which certain numerical realizations are plausible to prepare based on thorough nanoscale experiments.

This paper presents four key results in the philosophy of language. Firstly, it distinguishes between partial and consistent assertion of a sentence, and introduces the concept of an equivocal sentence, which is both partially asserted and partially denied. Secondly, it proposes a novel definition of truth, stating that a true sentence is one that is consistently asserted. This definition avoids the Liar paradox, does not restrict classical logic, and applies to declarative sentences in the language used by any particular person. Thirdly, the paper introduces an epistemic model of language, called assertional language, which formalizes the definition of truth. Finally, it provides an argument for the falsity of so-called Liar sentences. The proposed definition of truth can be viewed as a formal account of the correspondence theory. The epistemic model is a powerful concept that allows for combining different languages in a meaningful way. This model is uniquely capable of reflecting on epistemic inconsistencies, such as logical paradoxes, in a consistent manner and without resorting to non-classical solutions.

This literature review has been compiled to form an evidenced-based review on the standards for Dental Practices in their choice and use of personal protective equipment (PPE) within the COVID-19 Pandemic and beyond: it is prepared on the basis of the current best available evidence. The review encompasses risk management strategies for both Dental Personnel and Patients in the application and use of Face Masks & Respirators.In summation, from the evidence available, it is apparent that in the lab setting N95/FFP2 masks are superior in their efficiency but in the clinical setting such a difference is not seen as clearly. As such the minimum standard of care should be that of a standard surgical mask. Faced with the emergence of the virulent disease that is Covid-19, it is logical to use FFP2/N95 respirator masks in aerosol generating procedures where they offer greater resistance to fluid penetration and a better face seal when adequately fit tested as a gold standard. But if a dry field isolation technique involving high volume evacuation is used, there is no clear benefit of respirator masks (N95/FFP2 or N99/FFP3) when balanced with the extra risk of compliance, cost and comfort in wearing a standard fluid-resistant surgical mask.

The BRightest Target Explorer (BRITE) is the pioneering nanosatellite mission dedicated for photometric observations of the brightest stars in the sky. The BRITE CCD sensors are poorly shielded against extensive flux of energetic particles which constantly induce defects in the silicon lattice. In this paper we investigate the temporal evolution of the generation of the dark current in the BRITE CCDs over almost 4 years after launch. Utilizing several steps of image processing and employing normalization of the results it was possible to obtain useful information about the progress of thermal activity in the sensors. The outcomes show clear and consistent linear increase of induced damage despite the fact that only about 0.14% of CCD pixels were probed. By performing the analysis of temperature dependencies of the dark current, we identified the observed defects as phosphorus-vacancy (PV) pairs, which are common in proton irradiated CCD matrices. Moreover, the Meyer-Neldel empirical rule was confirmed in our dark current data, yielding E_MN=24.8 meV for proton-induced PV defects.

Rice provides ~20% of human dietary energy and, for many people, a similar share of their protein. Rice cultivation, however, produces significant greenhouse gas (GHG) emissions, comparable to those from the aviation sector. The main GHG from rice production is methane, mostly a result of conventional rice cultivation (CRC) keeping rice fields continuously flooded during the crop cycle. There is extensive evidence that alternate wetting and drying (AWD) of rice fields substantially reduces methane emissions. AWD is one component of the System of Rice Intensification (SRI), an agroecological approach to the management of plants, water, soil and nutrients practiced by millions of farmers in both lowland irrigated rice and upland rainfed cultivation. Thirteen countries have included SRI in their Nationally Determined Contributions to GHG reduction or climate change mitigation. This article reviews 16 field studies of the net reduction in GHG emissions from the adoption of AWD, eight from the adoption of SRI, and two that compared SRI and AWD. Where available, the review includes data on yield and therefore on carbon dioxide-equivalent GHG emissions per kilogram of rice produced. The evidence indicates that AWD and SRI offer a similar and substantial reduction (~35–41%) in GHG emissions per hectare compared with conventional rice cultivation. However, SRI offers ~66% greater yield than CRC, and therefore greater reduction in emissions per kilogram of rice, ~54% more than AWD. The limited data directly comparing SRI and AWD support this finding. SRI also appears to have greater potential to sequester carbon in the soil. SRI lowers rice farmers’ costs of production, adds to their income and can make climate-friendly methods more attractive. Both AWD and SRI are greatly preferable to current conventional practices, but SRI offers opportunities to contribute to food security while directly addressing the drivers of climate change.

Planning and implementation of construction projects are difficult processes and are burdened with many risk elements. The budget spread over time, which is developed on the basis of the schedule, presents the expected distribution of costs throughout the duration of the works, which during the implementation of the project is subject to constant changes resulting from time, cost and organizational factors. Managing construction contracts requires managers to be able to analyze on an ongoing basis the variances of production costs - from the values calculated in the offer cost estimate and assumed in the Budgeted Cost of Work Scheduled. The article attempts to analyze the emerging time and cost variances using proprietary C-S and S-C monitoring, based on simple indicators of the EVM method. An example of construction of a multi-family housing development was used to study the variances of planned and incurred costs.

The AtomDB project provides models of X-ray and EUV emitting astrophysical spectra for optically thin, hot plasma. We present the new software package, PyAtomDB, which now underpins the entire project, providing access to the underlying database, collisional radiative model calculations, and spectrum generation for a range of models. PyAtomDB is easily extensible allowing users to build new tools and models for use in analysis packages such as XSPEC. We present two of these, the kappa and ACX models for non-Maxwellian and Charge-Exchange plasmas respectively. In addition, PyAtomDB allows full open access to the apec code which underlies all of the AtomDB spectra and has enabled development of a module for estimating the sensitivity of emission lines and diagnostic line ratios to uncertainties in the underlying atomic data. We present these publicly available tools and results for several X-ray diagnostics of Fe L-shell ions and He-like ions as examples.

Sleep deprivation (failure to get enough sleep) is a public health issue that can negatively impact our body including cognitive function. Many studies have been done in Saudi Arabia to evaluate the impact of poor sleep and academic performance but almost all of them were done at university level. To investigate the relationship between sleep quality and general degree of academic achievement in school students. This is a cross-sectional, school-based study, conducted at Jazan Region, Saudi Arabia. A total of 957 participants (615 male and 342 female) were recruited from a state school. The study used a standardized, confidential, validated self-administered questionnaire to assess sleep quality and habits. By using Statistical Package for Social Studies (SPSS 22), achievement of the students was significantly related to the following parameters; laziness and fatigue after wake-up time and during school time, lack of concentration during school time, difficulty in complete tasks during school time and inability to maintain wakefulness during school time. Furthermore, students with poor academic degrees reported more significant incidence of sleeping at school, excessive daytime sleepiness, and other sleep related disorder than good academic degrees. Students with poor sleep quality have lower school grades.

Large-span post-tensioned (PT) beams play a crucial role in maximizing the benefits of post-tensioning techniques. Bonded and unbonded systems are prevalent, with the latter being more widespread in the United States. While bonded systems are advantageous for creating long spans when multiple tendons are grouped in ducts, limited literature exists on their demolition. In a case study, this paper addresses the unique challenge of demolishing large-span bonded post-tensioned beams due to a building's functional change. Emphasizing insights for engineers, it explores the use of cutting and dismantling methods, considering the presence of prestressed cables. The demolition process is distinctive due to the presence of numerous pre-stressed cables along the beams, necessitating a specialized and cautious cutting approach. This is accomplished through the use of a drilling technique that selectively distresses the tendons, ensuring they are not all affected simultaneously. An intriguing observation discussed in this paper pertains to the occurrence of horizontal cracks accompanied by loud sounds following the drilling process, offering insights from the design perspective of PT systems. The paper details an innovative method for safely demolishing large-span bonded PT beams, using ground-penetrating radar and computer models to navigate structural complexities and ensure nearby structures' safety.

In this study, a three-dimensional bioelectrochemical reactor system (3D-BERs) with granular activated carbon (GAC) epitomizes a novel treatment technology for treating nitrate-polluted water. The conventional denitrification process faces many challenges, including the huge demand for organic carbon, long-term accumulation of intermediate products, and the adaptation period. Results shown that under the optimal conditions of the COD/NO3--N ratio was 1.5, the denitrification efficiency reached 98.62%, when compared to 81.12% at COD/ NO3--N ratio of 3.5, and the initial pH of 7.5 ± 0.5, NO3--N was entirely removed at 2.2 h without accumulation of nitrite. The high initial ratio of NO2--N/NO3--N is mainly to accelerate the denitrification rate by accelerating the reduction of nitrite. Denitrification process followed by zero-order kinetics linear model for at different concentrations of inlet NO3--N, and achieved higher denitrification rate at greater inlet NO3--N concentration. High-throughput sequencing shows that the community structure and relative abundance of bacteria changed significantly, especially at the genes and the phyla level in immobilized GAC particles. Microbial composition enhanced the removal of nitrogen at the inner surface (IS) and bottom surface (BS) of immobilized GAC carriers. Therefore, this system is expected to be a more efficient and useful supplement or a cost-effective alternative compared to the traditional low carbon to nitrogen wastewater treatment system.

Introduction: The current generation of 3D printers are lighter, cheaper, and smaller, making them more accessible to the chairside digital dentist than ever before. 3D printers in general in the industrial and chairside setting can work with various types of materials including, metals, ceramics, and polymers. Evidence presented in many studies show that an ideal material used for dental restorations is characterised by several properties related to durability, cost-effectiveness, and high performance. This review is the second part in a 3D Printing series that looks at the literature on material science and applications for these materials in 3D printing as well as a discussion on the potential further development and future evolution in 3D printing materials. Conclusions: Current materials in 3D printing provide a wide range of possibilities for providing more predictable workflows as well as improving efficiency through less wasteful additive manufacturing in CAD/CAM procedures. Incorporating a 3D printer and a digital workflow into a dental practice is challenging but the wide range of manufacturing options and materials available mean that the dentist should be well prepared to treat patients with a more predictable and cost effective treatment pathway. As 3D printing continues to become a commonplace addition to chair side dental clinics, the evolution of these materials, in particular reinforced PMMA, resin incorporating zirconia and glass reinforced polymers offer increased speed and improved aesthetics that will likely replace subtractive manufacturing milling machines for most procedures.

The voluminous daily output of autism research has become increasingly disconnected, existing largely within highly specific subspecialty areas, and lacking cross-disciplinary linkages of context, theory, and findings to inform a unified body of knowledge. Robust syntheses of published research across the fields of psychiatry, cellular and molecular biology, neurology, endocrinology, immunology, behavioral and social sciences, and pedagogy may help clarify and extend current knowledge by guiding more efficient future research efforts investigating underlying causes, developmental divergences, novel treatments, and specific, sensitive biological markers in autism. This synthesis of interdisciplinary research indicates the hypothalamic-pituitary-adrenal (HPA) stress axis may be at the center of an interaction among sex steroids, immune function, signaling protein transcriptions, neurogenesis, and dysregulation of brain structures sending or receiving projections from the HPA stress axis. These interaction manifest observably as a range of sexually dimorphic behaviors and functional limitations often falling within the current diagnostic features of Autism Spectrum Disorder (ASD). The pathogenicity of endocrine dysregulation may serve as a valuable model for developing a cohesive theory of ASD by explaining how the HPA and connected brain areas respond to extreme conditions of dysregulated endocrine signaling to cause symptoms associated with autism.

This review describes how resonance in amides is greatly affected upon substitution at nitrogen by two electronegative atoms. Nitrogen becomes strongly pyramidal and resonance stabilisation, evaluated computationally, can be reduced to as little as 50% that of N,N-dimethylacetamide. However, this occurs without significant twisting about the amide bond, which is borne out both experimentally and theoretically. In certain configurations, reduced resonance and pronounced anomeric effects between heteroatom substituents are instrumental in driving the HERON (Heteroatom Rearrangement On Nitrogen)^† reaction, in which the more electronegative atom migrates from nitrogen to the carbonyl carbon in concert with heterolysis of the amide bond, to generate acyl derivatives and heteroatom-substituted nitrenes. In other cases the anomeric effect facilitates S­_N1 and S_N2 reactivity at the amide nitrogen.

To advance probiotic research, a comprehensive understanding of bacterial interactions with human physiology at the molecular and cellular levels is fundamental. Lacticaseibacillus rhamnosus LGG® is a bacterial strain that has long been recognized for its beneficial effects on human health. Probiotic effector molecules derived from LGG®, including secreted proteins, surface-anchored proteins, polysaccharides, and lipoteichoic acids, that interact with host physiological processes have been identified. In vitro and animal studies have revealed that specific LGG® effector molecules stimulate epithelial cell survival, preserve intestinal barrier integrity, reduce oxidative stress, mitigate excessive mucosal inflammation, enhance IgA secretion, and provide long-term protection through epigenetic imprinting. Pili on the cell surface of LGG® promote adhesion to the intestinal mucosa and ensure close contact to host cells. Extracellular vesicles produced by LGG® recapitulate many of these effects through their cargo of effector molecules. Collectively, the effector molecules of LGG® exert a significant influence on both the gut mucosa and immune system, that promotes intestinal homeostasis and immune tolerance.

Inertial navigation system (INS) is a basic component for obtaining a continuous navigation solution in various applications. The INS navigation solution suffers from a growing error over time. In particular, its navigation solution depends mainly on the quality and grade of the inertial measuring unit (IMU) that provides the INS with both accelerations and angular rates. However, low-cost small micro-electro-mechanical systems (MEMS) suffer from tremendous error sources such as bias, scale factor, scale factor instability, and highly non-linear noise. Therefore, MEMS-IMU measurements lead to drifted solutions when used as a control input to the INS. Accordingly, several approaches have been introduced to model and mitigate the errors associated with IMU. In this paper, a machine learning-based adaptive neuro-fuzzy inference system (ML-ANFIS) is proposed to leverage the performance of low-grade IMUs in two phases. The first phase is training 50% of the low-grade IMU measurements with a high-end IMU to generate a suitable error model. The second phase involved testing the developed model on the remaining low-grade IMU measurements. A real road trajectory was conducted to evaluate the performance of the proposed algorithm. The results show the effectiveness of utilizing the proposed ML-ANFIS algorithm in removing errors and improving the INS solution compared to the traditional one. An improvement of 70% in the 2D-positioning and 92% in the 2D-velocity INS solution is attained when the proposed algorithm was applied compared to the traditional INS solution.

Increase in the emission of Greenhouse Gases (GHS) is among the significant concerns of government, societies, and policymakers. Due to the highest share of carbon dioxide in the produced GHGs, it is necessary to assess the factors that influence its emission. Energy systems and economic activities noticeably influence the amount of carbon dioxide production of countries. In this article, Artificial Neural Network (ANN) in addition to a linear correlation used to predict carbon dioxide emission of four CIS countries, including Turkmenistan, Uzbekistan, Kazakhstan, and Azerbaijan based the consumption of various energy sources and GDP, as the economic indicator. According to the obtained data by the proposed models, carbon dioxide emission can be accurately estimated by utilizing the mentioned input data. Models’ R-squared value are 0.9997 and 0.9999 in the cases of applying the correlation and ANN-based model. Moreover, the average absolute relative deviations by utilizing the correlation and GMDH ANN are approximately 1.05% and 0.61%, respectively. These statistical values demonstrate more proper performance of the ANN-based model compared with the applied linear correlation.

Areas covered with vegetation play a key role for life on Earth and should be inventoried in a clear and complete manner in order to improve the process of its protection and development. Data showing the amount of greenery in areas most deformed by humans, i.e. urbanized areas, are particularly important. Local governments need to know how to invest theirs limited sources in the quality of life of residents by supplementing the urban fabric with additional vegetation. The article presents a proposal for how to calculate the degree of greenness of cities based on remote sensing data. Additionally, a novel method was proposed to help in planning the development of areas covered with vegetation, taking into account the spatial distribution of the local population. The result was a comprehensive method presenting the actual natural situation in a specific city.

Heat stress during the grain-filling period is the main abiotic stress factor limiting grain yield and quality in wheat (Triticum aestivum L.). In this study, 64 wheat genotypes were exposed to heat stress during reproduction caused by delayed sowing in two growing seasons. Grain yield, 1000 grain weight (GW), grain hardness (GH), and grain-quality related traits were investigated using wholemeal flour. Heat stress caused a significant decrease in GW through reducing starch content (SC) and a non-compensating rise in protein content (PC), and thereby resulted in lower yield. In addition, significant increases in flour water absorption (WA), Zeleny sedimentation volume (ZT), ash content (AC), lipid content (LC), loaf volume (LV), wet gluten content (WG), dry gluten content (DG), gluten index (GI), and amylopectin content (APC) were found following heat stress. In contrast, decreases in grain moisture content (MC) and amylose content (AMC) induced by heat stress were observed. The heat-tolerant genotypes were superior in grain yield, GW, SC, AMC, and MC. While the sensitive genotypes contained higher PC, LV, GI and AMP. A group of wheat genotypes characterized with a higher yield, AMC, GW, and SC as well as lower PC, WA, GH, ZT, and LV; and was found to be the most heat tolerant by principal component analysis. Decreases in the ratio of carbohydrates to proteins induced by heat stress, and lower protein content of normal grown wheat genotypes were observed. Therefore, lighter weight and smaller grains produce a smaller starchy endosperm with lower quality (less amylose) and higher grain protein content in heat stress compared to normal conditions. Heat stress caused by delayed sowing improves some of the baking-quality related traits. Whether this improvement in grain quality attributes will translate into better human health outcomes requires further investigation.

Radiotheranostics refers to pairing of radioactive imaging biomarkers with radioactive therapeutic compounds that deliver ionizing radiation. Given the introduction of very promising radio-pharmaceuticals, the radiotheranostics approach is creating a novel paradigm in personalized, targeted radionuclide therapies (TRTs), also known as radiopharmaceuticals (RPTs). Radiother-apeutic pairs targeting somatostatin receptors (SSTR) and prostate-specific membrane antigens (PSMA) are increasingly used to diagnose and treat patients with metastatic neuroendocrine tumors (NETs) and prostate cancer. In parallel, radiomics and artificial intelligence (AI) as important areas in quantitative image analysis are paving the way for significantly enhanced workflows in diagnostic and theranostic fields, from data and image processing to clinical decision support, improving patient selection, personalized treatment strategies, response prediction, and prognostication. Furthermore, AI has the potential for tremendous effectiveness in patient dosimetry which copes with complex and time-consuming tasks in the RPT workflow. The present work provides a comprehensive overview of radiomics and AI application in radio-theranostics, focusing on pairs of SSTR- or PSMA‑targeting radioligands, describing the funda-mental concepts and specific imaging/treatment features. Our review includes ligands radio-labeled by 68Ga, 18F, 177Lu, 64Cu, 90Y, and 225Ac. Specifically, contributions by radiomics and AI towards improved image acquisition, reconstruction, treatment response, segmentation, restag-ing, lesion classification, dose prediction, and estimation as well as ongoing developments and future directions are discussed.

Obesity is a universal health concern that can lead to serious diseases. The side effects of synthetic anti-obesity drugs necessitate the finding of suitable natural/herbal alternatives. Mother nature offers a wide range of plants with medicinal properties that include crude extracts and isolated compounds which are effective for controlling and reducing weight gain. Obesity was induced in 60, 3-week-old male ICR mice, using high-fat diet (60% dietary energy from fat) for 16-week. The mice were divided at random into six groups with 10 mice: mice fed with high-fat diet (HFD) only, mice fed normal diet only (NC), and orlistat at 15.9 mg/kg (HFD+Orlistat), and mice in three other high-fat diet groups treated with methanolic leaf extract of Clinacanthus nutans (MECN) at 500, 1000 and 1500 mg/kg. After 21-day of the treatment, MECN significantly reduced (P<0.05) the body weight, visceral fat and muscle saturated fatty acid compositions. There was also significant downregulation of HSL, PPAR α and PPAR γ and SCD genes expressions in the obese mice treated with 1500 mg/kg MECN compared to the HFD group. Therefore, MECN is a potentially useful natural supplement for alleviating obesity and obesity-mediated metabolic diseases.

The paper presents an analysis of the possibility of producing traction brushes from waste materials. Brushes are used to ensure good electrical contact between the rail and the pantograph. Slides are produced in the process of hot pressing, with parameters of heating up to max 175 ⁰C, at the minimal pressure value of 200 MPa. The developed brushes with a high (55-60%) content of recycled materials have comparable characteristics to commercial brushes, and some of the prototypes are even more durable and break-resistant.

Project managers should balance a variety of resource elements in building projects while taking into account many major concerns, including time, cost, quality, risk, and the environment. This study presents a framework for resource trade-offs in project scheduling based on the Building Information Modeling (BIM) methodology and metaheuristic algorithms. First, a new metaheuristic algorithm called Fire Hawk Optimizer (FHO) is used. Using project management software and the BIM process, a 3D model of the construction is created. In order to maximize quality while minimizing time, cost, risk, and CO2 in the project under consideration, an optimization problem is created, and the FHO's capability for solving it is assessed. A predefined stopping condition is taken into account while doing 30 independent optimization runs to obtain the statistical metrics, such as the mean, standard deviation, and the required number of objective function evaluations. The results show that the FHO algorithm is capable of producing competitive and exceptional outcomes when it comes to trade-off various resource options in projects.

The exfoliation of graphene has opened a new frontier in material science with a focus on 2D materials. The unique thermal, physical and chemical properties of these materials have made them one of the choicest candidates in novel mechanical and nano-electronic devices. Notably, 2D materials such as graphene, MoS2, WS2, h-BN, and Black Phosphorus have shown outstanding lowest frictional coefficients and wear rates, making them attractive materials for high-performance nano-lubricants and lubricating applications. The objective of this work is to provide a comprehensive overview of the most recent developments in the tribological potentials of 2D materials. At first, the essential physical, wear, and frictional characteristics of the 2D materials including their production techniques are discussed. Subsequently, the experimental explorations and theoretical simulations of the most common 2D materials are reviewed in regards to their tribological applications such as their use as solid lubricants and surface lubricant nano-additives. The effects of micro/nano textures on friction behavior are also reviewed. Finally, the current challenges in tribological applications of 2D materials and their prospects are discussed.

To close the nutrient-related yield gaps in maize, balanced nutrition using primary and secondary macronutrients as well as micronutrients is recommended. Multi-nutrient diagnostic field trials were conducted in Guinea Savanna of Nigeria to assess the interactive effects of macronutrients and micronutrients on maize grain yields, nutrient uptake as well as N, P and K use efficiencies. The treatments consisted of a control (zero fertilizer applied), an NPK treatment and 10 other treatments in which macronutrient (Mg, S) and/or micronutrients (B, and Zn) were added to the NPK. The experiment was laid out in Randomized Complete Block Design with 3 replications. Data collected were subjected to mixed model with nutrient management strategy as fixed effects while replication nested in location and interaction between location and nutrient management strategy as random effects. The results revealed significant effects (P < 0.05) of nutrient management strategy on maize yield, nutrient uptake and nutrient use efficiencies of N, P and K. The study revealed that yield advantage over the recommended NPK fertilizer as a result of application macronutrients and micronutrients were highest with Mg in Lere (2.4 t ha⁻¹), S + B + Zn in Faskari (2.8 t ha⁻¹), S + B in Doguwa (1.5 t ha⁻¹) and S + Zn in Toro (2.4 t ha⁻¹). Addition of Mg, S and B significantly increases macronutrient uptakes over the recommended NPK only. Agronomic use efficiency, internal utilization efficiency, apparent recovery efficiency and partial factor productivity were significantly increased with the addition of S, Mg, and B but were not improved with Zn application. It was concluded that nutrient limitations to maize in the Guinea Savanna go beyond N, P and K. This study recommends that S, Mg, and B are needed to improve maize productivity and engender improve the use efficiency of NPK fertilizers.

The present paper presents findings from the follow-up of 185 of these nurses who had been involved in the front-line care of COVID-19 patients in urban centres in Northern England, during and after the “second wave” of COVID patients in November, 2020. Measures of adjustment, stress (including PTSD), and Maslowian self-actualization were added to earlier measures of personality, adjustment, work-life stress, and career intention. Cluster analysis identified three types in the 2020-2023 cohort: I ‘Actualizing Professionals’; (N=62); II ‘Strong Professionals’ (N=56); III ‘Highly Stressed Nurses’ (N=45). These latter very stressed nurses included all nurses (N=16) identified as having PTSD symptoms.

This study clearly shows that the corona pandemic has a significant impact on consumers’ eating habits. More food is eaten overall, and more convenience products such as ready meals and canned food with a longer shelf life are purchased. The consumption of alcohol and confectionery has also increased. In return, the consumption of fresh fruit and vegetables has declined. It becomes clear that families who are financially affected by the pandemic represent a vulnerable group. With the increasing duration of the pandemic, repeated lockdowns, corona-related closings of schools and kindergartens, health consequences are to be expected in the medium to long term, especially for this population group.

Neurological disorders are the leading cause of cognitive and physical disability worldwide, affecting 15% of the global population. Due to the demographics of aging, the prevalence of neurological disorders, including neurodegenerative diseases, will double over the next two decades. Unfortunately, while available therapies provide symptomatic relief for cognitive and motor impairment, there is an urgent unmet need to develop disease-modifying therapies that slow the rate of pathological progression. In that context, biomarkers could identify at-risk and prodromal patients, monitor disease progression, track response to therapy, and parse causality of molecular events to identify novel targets for further clinical investigation. Thus, identifying biomarkers that discriminate between diseases and reflect specific stages of pathology would catalyze the discovery and development of therapeutic targets. This review will describe the prevalence, known mechanisms, ongoing or recently concluded therapeutic clinical trials, and biomarkers of three of the most prevalent neurodegenerative diseases, including Alzheimer’s disease (AD), amyotrophic lateral sclerosis (ALS), and Parkinson’s disease (PD).

Abstract Aim of the study: Presentation of ophthalmic symptoms of Cerebral Autosomal Dominant Arteriopathy with Subcortical Infracts and Leucoencephalopathy (CADASIL). Material and methods: Clinical presentation of female patient with diagnosed CADASIL, manifested by transient loss of vision, migraine, convergence insufficiency, diplopia, increased deep tendon reflexes of upper left limb, subcortical infarcts, mood disturbances and dementia. Results: Confirmed NOTCH3 gene mutation (p.Cys212Gly), and presence of granular osmiophilic material (GOM) in cutaneous small vessel wall in immunohistochemistry laboratory test (IHC). Magnetic resonance imaging (MRI) revealed bilateral focal vasogenic lesions in white matter of cerebral hemisphere with single micro-focal infarct in the left external capsule. Furthermore, a left eye exophoria, a bilateral peripheral visual field loss of 20 degrees and a loss of nasolabial fold was confirmed during ophthalmic tests. An eye fundus examination as well as a fluorescein angiography (FA) revealed vessel constriction of retinal arteries and a peripheral retinal pigment epithelium (RPE) atrophy with focal drusen in the left eye. The doppler ultrasonography (USG) confirmed a decreased blood flow and an increased vascular resistance of the extraocular vessels. The pattern electroretinogram (PERG) revealed a reduced P50 wave amplitude in the patient’s left eye. Conclusions: intermittent blindness, migraine, convergence failure, diplopia with specific MRI signs, NOTCH3 mutation, and the presence of GOM in the skin of small blood vessels in a young or middle-aged patient suggests CADASIL. New observations include: atrophic changes in the RPE, hemodynamic disturbances in blood flow in the short posterior ciliary arteries and in the central retinal artery, single drusen in the retina, and a reduced amplitude of the P50 wave in PERG.

Antibiotic resistance is a pressing global and planetary health challenge. Links between climate change, antibiotic use and the emergence of antibiotic resistance have been well documented, but less attention has been given to the impact(s) of earth systems on specific bacterial livestock diseases at a more granular level. Understanding the precise impacts of climate change on livestock health – and in turn the use of antibiotics to address that ill-health – is important in providing an evidence base to tackle such impacts and to develop practical, implementable and locally acceptable solutions within and beyond current antibiotic stewardship programmes. In this paper, we set out the case for better integration of earth scientists and their specific disciplinary skill set (specifically, problem-solving with incomplete/fragmentary data; the ability to work across four dimensions and at the interface between the present and deep/geological time) into planetary health research. We then discuss a methodology that makes use of risk mapping, a common methodology in earth science but less frequently used in health science, to map disease risk against changing climatic conditions at a granular level. This will enable predictions of future disease risk and risk impacts based on predicted future climate conditions, and thus provide an evidence base for planetary health activists to influence policy and develop mitigations. Our case study – of climate conditions’ impact on livestock health in Karnataka, India – clearly evidences the benefit of integrating earth scientists into planetary health research.

Dams are a critical infrastructure system for many communities, but they are also one of the most challenging to inspect. Dams are typically very large and complex structures, and the result is that inspections are often time-intensive and require expensive, specialized equipment and training to provide inspectors with comprehensive access to the structure. The scale and nature of dam inspections also introduces additional safety risks to the inspectors. Unmanned aerial vehicles (UAV) have the potential to address many of these challenges, particularly when used as a data acquisition platform for photogrammetric three-dimensional (3D) reconstruction and analysis, though the nature of both UAV and modern photogrammetric methods necessitates careful planning and coordination for integration. This paper presents a case study on one such integration at the Brighton Dam, a large-scale concrete gravity dam in Maryland, USA. A combination of multiple UAV platforms and multi-scale photogrammetry was used to create two comprehensive and high-resolution 3D point clouds of the dam and surrounding environment at intervals. These models were then assessed for their overall quality, as well as their ability to resolve flaws and defects that were artificially applied to the structure between inspection intervals. The results indicate that the integrated process is capable of generating models that accurately render a variety of defect types with sub-millimeter accuracy. Recommendations for mission planning and imaging specifications are provided as well.

The goal of farmers operating in a market economy is to maximise profit. In the face of the changing political situation, the main social interest, besides food security, should be energy security. This article aims to indicate the direction of agricultural policy development so that it guarantees both the economic security of producers—farmers—and Europe’s energy security. The work uses data obtained from the agri benchmark Cash Crop database. DEA method and stepwise multiple regression were used. The research showed that plants are already grown in Europe which will ensure high energy efficiency of production without compromising farm financial results (including oats, peas and winter rye) and that improving the involvement of certain inputs results in improved production efficiency (among others, by expenditure on agricultural advisory services). The significance of the presented research results from the fact that the recent COVID pandemic and escalation of the military conflict in Ukraine have led to a renewed interest in the concept of EU energy security, i.e. generation of generating the greatest possible amount of energy within the EU, to be used both for food and non-food purposes.

Late onset Pompe disease is a recessive lysosomal storage disease. Clinical features include skeletal muscles deficiency and diaphragm weakness. Clinical management relies on supportive treatment and mechanical ventilation in patents with chronic respiratory failure. M mode ultrasound and tissue Doppler imaging can be used to assess and to follow up diaphragm function.

Road alleys, especially on areas of Warmia (north-east Poland), are multifunctional features in open landscapes. They serve as ecological corridors connecting habitats and play an important role in sustaining ecological stability. However, multiple road authorities claim that tree-lined routes are a threat for traffic safety and therefore should be removed. The aspect of safety seems to be crucial to them, significantly overwhelming alley benefits. The vitality problems of the trees (which are mainly mature and aging) deliver arguments to cutting them down. The aim of this paper is examination of environmental and natural value of the road alleys (based on a 14 km long-distance of the Gamerki – Jonkowo road), and verification of the degree of hazard posed by trees designated for cutting because of safety reasons. The six-examination framework for the research was developed. Tree risk assessment and vitality evaluation, pulling tests, examination of protected beetle species - hermit beetle, the lichens species, and examination of bat fauna were performed. The results revealed no trees in the resignation phase and confirmed that the alley is a unique natural and landscape habitat with protected species of lichens, a few bats species and valuable insect species, among others hermit beetle (Osmoderma barnabita) existing there. The environmental value of the alley is, therefore, hard to overestimate and cannot be perceived only as a component of the road infrastructure. The maintenance of the trees seems to be essential when taking into account environmental stability of the region.

The study of the concentrations and effects of fine particulate matter in urban areas have been of great interest to researchers in recent times. This is due to the acknowledgment of the far-reaching impacts of fine particulate matter on public health. Remote sensing data have been used to monitor the trend of concentrations of particulate matter by deriving aerosol optical depth (AOD) from satellite images. The Center for International Earth Science Information Network (CIESIN) has released the second version of its global PM_2.5 data with improvement in spatial resolution. This paper revisits the study of spatial and temporal variations in particulate matter in Saudi Arabia by exploring the cluster analysis of the new data. Cluster analysis of the PM_2.5 values of Saudi cities is performed by using Anselin local Moran’s I statistic. Also, the analysis is carried out at the regional level by using self-organizing map (SOM). The results show an increasing trend in the concentrations of particulate matter in Saudi Arabia, especially in some selected urban areas. The eastern and south-western parts of the Kingdom have significantly clustering high values. Some of the PM2.5 values have passed the threshold indicated by the World Health Organization (WHO) standard and targets posing health risks to Saudi urban population.

This paper considers the application of two selected algorithms (Cuckoo Search CS, Firefly Algorithm FA) to determine and maximize the reliability of a two complex system known from the literature. This system operates with resource constraints. In addition, several classical methods for determining the reliability of systems have been applied. Although the CS algorithm is known for its effectiveness as it uses the Lévy flight, for the presented optimization tasks the FA firefly algorithm in the considered parameter range proved to be more effective. The presented results broaden the existing discussion on the application of nature-inspired algorithms for solving RRAP (Reliability Redundancy Allocation Problem) problems. From this point of view, two described test scenarios can be considered as a suitable tool for validating other algorithms in RRAP problems. Not only the values of the criterion functions can be compared, but also other introduced parameters and statistical analyse of variance (ANOVA) with post-hoc RIR Tuckey test was discussed.

Analgesic products for piglet castration are critically needed. This requires extensive animal experimentation such as to meet regulatory-required proof of efficacy. At present, there are no validated methods of assessing pain in neonatal piglets. This poses challenges for investigators to optimize trial design and to meet ethical obligations to minimize the number of animals needed. Pain in neonatal piglets may be subtle, transient and / or variably expressed and, in the absence of validated methods, investigators must rely on using a range of biochemical, physiological and behavioural variables, many of which appear to have very low (or unknown) sensitivity or specificity for documenting pain, or pain-relieving effects. A previous systematic review of this subject was hampered by the high degree of variability in the literature base both in terms of methods used to assess pain and pain mitigation, as well as in outcomes reported. In this setting we provide a narrative review, to assist in determining the optimal methods currently available to detect piglet pain during castration and methods to mitigate castration-induced pain. In overview, the optimal outcome variables identified are nociceptive motor and vocal response scores during castration, and quantitative sensory-threshold response testing and pain-associated behaviour scores following castration.

Magnetic properties of soft magnetic composites are highly sensitive to the processing conditions. In this paper we focus on the possibility to model this effect using the Jiles-Atherton-Sablik theory. It is assumed that the effect of varying compaction pressure may be described by direct introduction of stress-dependent term in the model equations. The values of model parameters are kept constant. Verification of the proposed approach is carried out using measurement data from self-developed iron-based composite cores.

The Safe Drinking Water Act Amendments of 1996 require community water systems in the United States to send consumers Consumer Confidence Reports (CCRs). CCRs contain information on detected contaminants and required educational information about drinking water. The authors of this study developed a survey to evaluate how utilities track consumer feedback, understanding, and the role of the CCR in shaping consumer perceptions about water quality. Responses from this survey indicate it is common for utilities to indirectly track the effectiveness of their CCRs, but few utilities indicated directly evaluating consumer understanding or the effect of CCRs on consumer perceptions.

The current revolution in communication and information technology is facilitating the Internet of Things (IoT) infrastructure. Wireless Sensor Networks (WSN) are a broad category of IoT applications. However, power management in WSN poses a significant challenge when the WSN is required to operate for a long duration without the presence of a consistent power source. In this paper, we develop a batteryless, ultra-low-power Wireless Sensor Transmission Unit (WSTx) depending on the solar-energy harvester and LoRa technology. We investigate the feasibility of harvesting ambient indoor light using polycrystalline photovoltaic (PV) cells with a maximum power of 1.4mW. The study provides comprehensive power management design details and a description of the anticipated challenges. The power consumption of the developed WSTx was 21.09µW during the sleep mode and 11.1mW during the operation mode. The harvesting system can harvest energy up to 1.2mW per second, where the harvested energy can power the WSTx for six hours with a maximum power efficiency of 85.714%.

The aim of this study is to identify the effective institutional factors on the exploitation of entrepreneurial opportunities of the sports tourism industry in developing countries. This research is a qualitative study, the systematic method of Strauss and Corbin (1990) has been used to analyze the data. Interviewing is the main method of collecting data in this research, which semi-structured interviews were done with 45 members of the research community. According to Shane and Venkataraman individual-opportunity nexus framework (2000), interview questions were drafted and simultaneously with data collection from interviews, data analysis was performed. Based on the research results, 75 indicators affecting the exploitation of entrepreneurship opportunities in sports tourism were identified. Our research findings show that the necessary institutional arrangements in regulatory/legal/administrative dimensions (rule of law, government policies), normative/cultural (social norms, values and beliefs), cognitive/educational (promotion of elite knowledge, promotion of social knowledge) and guidance measures/supporter (public sector support, private sector support, complementary attraction and information technology) can improve the rate of entrepreneurial behavior in this area by increasing the ability and willingness of entrepreneurs to take advantage of entrepreneurial opportunities in the field of sports tourism. Finally, according to the research results, it can be suggested that for the growth of the sports tourism industry in developing countries, The existence of a legal, normative, supportive and educational environment will affect the ability and desire of market participants to identify and exploit the entrepreneurial opportunities of this emerging industry.

Innovations in engineering education are undergoing a noticeable transformation. Higher education institutions are practicing distance education, remote laboratories, studio pedagogies and several other approaches in order to increase their students’ retention, success, and preparedness for the job market. In engineering education, maker spaces have become popular in the last ten years in universities as well as community colleges, high-schools and community innovation hubs. A large number of engineering colleges have allocated significant spaces, and at some universities entire buildings as maker spaces to be used for curricular and extracurricular activities. Success stories of these types of spaces are well documented. This paper describes the activities and programs held at Tennessee Tech University’s maker space called ‘iMakerSpace.’ These accomplishments include several workforce development activities. The impact and effectiveness of the iMakerSpace is evaluated through analysis of survey data.

Fire accidents are common accidents amongst residential house occupants in Libya. Some of the factors that can mitigate fire accidents in Libyan residential houses include fire safety awareness and knowledge. This study investigated the level of awareness and knowledge of fire safety amongst residential house occupants in Libya. The possibility and consequences of fire hazards and risk existing in residential houses in Libya were also studied. Experimental data obtained for 1.5 m/s and 3.5 m/s as walking and running evacuation time, respectively amongst residential house occupants in Libya were also compared. The sample consist of 90 respondents with instruments of fire safety awareness and knowledge, fire hazard and consequences, and the involvement of residential house occupants in fire emergency. Statistical analysis was performed at p < 0.05 to determine the levels of residential awareness and knowledge regarding fire safety and the hazard and consequences. The findings illustrated that the items were highly reliable (α > 0.7) and normally distributed. Also, the results illustrated that the majority of residential house occupants in Libya have fair level of fire safety awareness and knowledge with overall percentage of 80% and 90%, respectively. On the other hand, the results further showed that majority of residential house occupants have good level of fire emergency involvement with 90%. This paper proposes a fire safety assessment method which may form the basis of future fire safety practice in Libya.

Generative adversarial networks (GAN) opened new possibilities for image processing and analysis. Inpainting, dataset augmentation using artificial samples or increasing spatial resolution of aerial imagery are only a few notable examples of utilizing GANs in remote sensing. This is due to a unique construction and training process expressed as a duel between GAN components. The main objective of the research is to apply GAN to generate an artificial Normalized Difference Vegetation Index (NDVI) using panchromatic images. The NDVI ground-truth labels were prepared by combining RGB and NIR orthophoto. The dataset was then utilized as input for a conditional generative adversarial network (cGAN) to perform an image-to-image translation. The main goal of the neural network was to generate an artificial NDVI image for each processed 256px × 256px patch using only information available in the panchromatic input. The network achieved 0.7569 ± 0.1083 Structural Similarity Index Measure (SSIM), 26.6459 ± 3.6577 Peak Signal-to-Noise Ratio (PNSR) and 0.0504 ± 0.0193 Root-Mean-Square Error (RSME) on the test set. The perceptual evaluation was performed to verify the usability of the method when working with a real-life scenario. The research confirms that the structure and texture of the panchromatic aerial remote sensing image contains sufficient information for NDVI estimation for various objects of urban space. Even though these results can be used to highlight areas rich in vegetation and distinguish them from urban background, there is still room for improvement in terms of accuracy of estimated values. The purpose of the research is to explore the possibility of utilizing GAN to enhance panchromatic images (PAN) with information related to vegetation. This opens interesting possibilities in terms of historical remote sensing imagery processing and analysis. The panchromatic orthoimagery dataset was derived from RGB orthoimagery.

Considering the significant advancements in autonomous vehicle technology, research in this field is of interest to researchers. To drive vehicles autonomously, controlling steer angle, gas hatch, and brakes need to be learned. The behavioral cloning method is used to imitate humans’ driving behavior. We created a dataset of driving in different routes and conditions and using the designed model, the output used for controlling the vehicle is obtained. In this paper, the Learning of Self-driving Vehicles Based on Real Driving Behavior Using Deep Neural Network Techniques (LSV-DNN) is proposed. We designed a convolutional network which uses the real driving data obtained through the vehicle’s camera and computer. The response of the driver is during driving is recorded in different situations and by converting the real driver’s driving video to images and transferring the data to an excel file, obstacle detection is carried out with the best accuracy and speed using the Yolo algorithm version 3. This way, the network learns the response of the driver to obstacles in different locations and the network is trained with the Yolo algorithm version 3 and the output of obstacle detection. Then, it outputs the steer angle and amount of brake, gas, and vehicle acceleration. The LSV-DNN is evaluated here via extensive simulations carried out in Python and TensorFlow environment. We evaluated the network error using the loss function. By comparing other methods which were conducted on the simulator’s data, we obtained good performance results for the designed network on the data from KITTI benchmark, the data collected using a private vehicle, and the data we collected.

Background: Reelin is a large extracellular glycoprotein secreted by Cajal–Retzius cells and has a main role during brain development, especially in neuronal migration. Reelin is comprised of N-terminal F-spondin like domain, eight tandem repeats, and a highly conserved basic C-terminal region (CTR). The CTR main role in the secretion of Reelin has been investigated by advertently inducing deletion in whole or a part of this region; however, the role of CTR point mutations on the secretion of Reelin is shrouded in mystery. Materials and Methods: In this study, we performed experimental analyses on a subregion of Human Reelin containing 5th and 6th repeats (R5-R6), a part of 8 th repeat and the CTR which were amplified from cDNA of K562 and HEPG2 cells and cloned into a mammalian expressional plasmid (pVP22/myc-His). Bioinformatics investigation was performed on the CTR at both level of nucleotide and amino acid as well as mutant type. Random mutagenesis by error-prone PCR method was utilized to induce mutation in the CTR. The secretion efficiency of recombinant wild-type and mutant Reelin constructs compared in cell lysate and supernatant isolated from the transiently transfected HEK 293T cells using 6XHistag ELISA method. Results: In-vitro study demonstrated that the CTR alteration(S3440P) leads to impairment of Reelin secretion even after overexpression. Conclusions: Our results indicate that S3440P substitution in highly conserved structure of the CTR has an important effect on Reelin secretion.

In the following work, the assessment of the strength properties of the critical area of the rotor stage of the turbine jet engine was undertaken. This is the place of fixing the blade in the rotor disc. An important aspect of this issue are characteristic geometrical dimensions and operating factors e.g., change in rotor speed. In this paper, the assessment of the strength properties of the existing trapezoidal blade-disc connection was undertaken using parametric analysis considering FSI. Virtual models of the compressor rotor stage were developed, including parametric blade-disc connections and discrete models for FEM and CFD analyses. In the parametric analysis of the blade-disc connection, one-way fluid-structure coupling was used. The parametric analysis was aimed at assessing selected geometric parameters in terms of their impact on the maximum reduced stresses in the blade root. It was examined how the adopted value of the friction coefficient influences the maximum reduced stresses in the rotor stage of the compressor.

Oxalate is a divalent organic anion that has implications across many biological and commercial processes. It is derived from plant sources, such as spinach, rhubarb, tea, cacao, nuts, and beans, and therefore is commonly found in raw or processed food products. Oxalate can also be made endogenously by humans and other mammals as a byproduct of hepatic enzymatic reactions. It is theorized that oxalate is useful for plants to store calcium and protect against herbivory. Clinically, oxalate is best known to be a major component of kidney stones, which commonly contain calcium oxalate crystals. Oxalate can induce an inflammatory response that decreases the immune system’s ability to remove renal crystals. When formulated with platinum as oxaliplatin (an anticancer drug), oxalate has been proposed to cause neurotoxicity and nerve pain. There are many sectors of industry that are hampered by oxalate, and some that depend on it. For example, calcium oxalate is troublesome in the pulp industry and the alumina industry as it deposits on machinery. On the other hand, oxalate is a common active component of rust removal and cleaning products. Due to its ubiquity, there is interest in developing efficient methods to quantify oxalate. Over the past four decades several diverse methods have been reported. These approaches include electrode-based detection, liquid chromatography or gas chromatography coupled with mass spectrometry, enzymatic degradation of oxalate with oxalate oxidase and detection of hydrogen peroxide as a product, and indicator displacement-based methods employing fluorescent or UV light-absorbing compounds. It has become clear that no single method will work best for every purpose. This review describes the strengths and limitations of each method, and may serve as a reference for investigators to decide which approach is most suitable for their work.

The recent approval of 177Lu PSMA-617 (Pluvicto®) by the United States Food and Drug Administration (FDA) is the culmination of decades of work in advancing the field of targeted radionuclide therapy for metastatic prostate cancer. 177Lu PSMA-617, along with the bone specific radiotherapeutic agent, 223RaCl2, are now commonly used in routine clinical care as a tertiary line of therapy for men with metastatic castrate resistant prostate cancer and for osseus metastatic disease respectively. While these radiopharmaceuticals are changing how metastatic prostate cancer is classified and treated, there is relatively little guidance to the practitioner and patient as to how best utilize these therapies, especially in conjunction with other more well-established regimens including hormonal, immunologic, and chemotherapeutic agents. This review article will go into detail about the mechanism and effectiveness of these radiopharmaceuticals and less well known classes of targeted radionuclide radiopharmaceuticals including alpha emitting prostate specific membrane antigen (PSMA) -, gastrin-releasing peptide receptor (GRPR) -, and somatostatin targeted radionuclide therapeutics. Additionally, a thorough discussion of the clinical approach of these agents is included and required futures studies.

Victor Vasarely’s (1906-1997) important legacy to the study of human perception is brought to the forefront and discussed. A large part of his impressive work conveys the appearance of striking three-dimensional shapes and structures in a large-scale pictorial plane. Current perception science explains such effects by invoking brain mechanisms for the processing of monocular (2D) depth cues. Here in this study, we illustrate and explain the local effects of 2D color and contrast cues on the perceptual organization in terms of figure-ground assignments, i.e. which local surfaces are likely to be seen as “nearer” or “bigger” in the image plane. Paired configurations are embedded in a larger, structurally ambivalent pictorial context inspired by some of Vasarely’s creations. The figure-ground effects these configurations produce reveal a significant correlation between perceptual solutions for “nearer” and “bigger” when no other monocular depth cues are given in the image. In consistency with previous findings on similar, albeit simpler visual displays, a specific color may compete with luminance contrast in resolving the planar ambiguity of a complex pattern context. Vasarely intuitively understood, and successfully exploited, this kind of subtle context effect in his art, well before empirical investigations had set out to study and explain their genesis in terms of information processing by the visual brain.