As the first initiative of its kind in Algeria, here is presented a solar-powered mobile “Ultraviolet Germicidal Irradiation” disinfection unit (UVGI) based on a special germicidal ultraviolet-C (UVC) radiator. The system was designed to disinfect several objects such as: medical tools, reusable masks, face-shields, gloves, phones, laptops, keys, money and many other portable devices that need to be disinfected/sterilized. It offers the advantage of complete autonomy through the built-in photovoltaic (PV) system that includes a solar panel, a gel battery, a charge controller and a power inverter. The system provides an extra 220V-50Hz outlet with 375VA maximum power to be used when energy is needed. The system is easily scalable to generate higher ultraviolet dosages by adding more UVC lamps. The chemical-free germicidal UVC sanitizing method employed by this device effectively disactivates a very wide range of microorganisms (microbes, bacteria and fungi and viruses including the actual SARS-CoV-2 that causes COVID-19 respiratory disease) and it has several advantages in comparison to chemical-based sanitizing methods. The total cost to make this open source device is below 1000 € and is easily customizable and scalable. This device is an open source, secure and fast equipment for objects and surface disinfection. The device will be fully automated by adding PIR sensors or remote control after further funding will be received.

In this paper, we address the problem of car detection from aerial images using Convolutional Neural Networks (CNN). This problem presents additional challenges as compared to car (or any object) detection from ground images because features of vehicles from aerial images are more difficult to discern. To investigate this issue, we assess the performance of two state-of-the-art CNN algorithms, namely Faster R-CNN, which is the most popular region-based algorithm, and YOLOv3, which is known to be the fastest detection algorithm. We analyze two datasets with different characteristics to check the impact of various factors, such as UAV’s altitude, camera resolution, and object size. The objective of this work is to conduct a robust comparison between these two cutting-edge algorithms. By using a variety of metrics, we show that none of the two algorithms outperforms the other in all cases.

In this paper, we address the problem of car detection from aerial images using Convolutional Neural Networks (CNN). This problem presents additional challenges as compared to car (or any object) detection from ground images because features of vehicles from aerial images are more difficult to discern. To investigate this issue, we assess the performance of two state-of-the-art CNN algorithms, namely Faster R-CNN, which is the most popular region-based algorithm, and YOLOv3, which is known to be the fastest detection algorithm. We analyze two datasets with different characteristics to check the impact of various factors, such as UAV's altitude, camera resolution, and object size. The objective of this work is to conduct a robust comparison between these two cutting-edge algorithms. By using a variety of metrics, we show that YOLOv3 yields better performance in most configurations, except that it exhibits a lower recall and less confident detections when object sizes and scales in the testing dataset differ largely from those in the training dataset.

Rising fuel costs, significant air pollution, and the need to mitigate the negative consequences of oil consumption have diminished the relevance of traditional vehicles. This shift encourages the adoption of safer, more efficient, and eco-friendly transportation alternatives, such as fuel cell, electric, and hybrid vehicles. Brushless direct current motors are gaining popularity due to their high efficiency, power factor, torque, and controllability. By 2030, Brushless Direct Current motors are expected to replace conventional motors as the standard for power transfer, especially in dynamic applications like automobiles, more electric aircraft. This study explores a control technique to improve real-time control of brushless direct current motors in electric vehicles It presents speed control of these system for electric vehicle applications and an overview of electric vehicle technologies. A model for the 120-degree mode was developed using electrical and mechanical equations in MATLAB/Simulink. Three scenarios were examined to assess the potential of controlling brushless direct current motors using constant and dynamic speed and torque. The actual value reached the reference value in the first two scenarios.

Copper is a heavy metal used in many industries and known for its negative impacts on the environment and human’s health. A novel structured metal organic framework (MOF) was used for copper adsorption for this work. SEM, EDAX, XRD and FTIR were done to confirm the structure of MOF prepared. MOF of 0.05 gm was used to examine its ability in Cu+ 2 removals with different initial concentrations of Cu+2 and pH values (5, 7 and 9). The prepared MOF was able to achieve Cu removal with 94.6%, 93%, 91.5%, and 92.5 % for the initial concentrations of 5, 10, 15, and 20 ppm respectively. It also performed very well for pH 5 and 7 with average removal ranging from 93.9%-95% for pH 5 and 7 for the initial concentrations of 5, 10, and 15 respectively which indicate that the prepared MOF is of high ability in Cu+ 2 removal.

The domain of construction engineering and management is evolving rapidly. Optimizing resource positioning is crucial for meeting the challenges of efficiency and productivity. This research presents a novel methodology that incorporates Agent-Based Modeling (ABM), Building Information Modeling (BIM), and Bluetooth Low Energy (BLE) technologies, augmented with a Client Early Warning System (CEWS) and a Decision Support System (DSS). What makes this study unique is that it provides a real-time methodology for resource allocation and project management, tailored to address the complexities of modern construction projects. The application of this integrated technological framework marks a significant leap in construction management, empowering data-driven decision-making and significantly improving project efficiency. Empirically validated through a case study at Helwan University's College of Engineering and substantiated by expert surveys, this research showcases a transformative model for resource management. The findings not only underscore the practical applicability of this approach but also open new horizons for its adoption in global construction practices, offering insights for future research endeavors focused on expanding these methodologies to a wider range of resources.

In recent years, pedestrian re-identification has gained a lot of interest due to its importance for many purposes such as security and safety. Many types of solutions have been proposed to solve this problem, where the majority are based on a features extraction such Convolution Neural Networks (CNNs). These approaches assume that only the identities that are in the training data can be recognized. The pedestrians in the training data are called In distribution (ID). However, in real world scenarios, new pedestrians and objects can appear in the scene and the model should detect them as Out Of Distribution (OOD). In our previous study , we proposed a pedestrian re-identification based on von-Mises Fisher (vMF) distribution. Each identity is embedded in the unit sphere as a compact vMF distribution far from other identities distributions. The embedding is done through a base CNN. Recently, proposed a framework called Virtual Outlier Synthetic (VOS), that detects OOD based on synthesising virtual outlier in the embedding space in an online manner. Their approach assumes that the samples from the same object maps to a compact space. This assumption aligns with the vMF based approach. Therefore, in this paper, we revisited the vMF approach and merged with VOS in order to detect OOD data points. We present our approach to merge both frameworks. We conducted several experiments to evaluate our proposed framework. Results showed that our framework was able to detect new pedestrian that do not exist in the training data in the inference phase. It also slightly helped to improve the re-identification performance.

Background: Although National Licensing Examinations (NLEs) may be a costly process, they can predict better performance for many following years. The current licensing requirements will not entail and new requirements will be requested. Therefore, this study suggests a framework for the development of the Medical Licensing Exam by exploring the opinions of Egyptian medical practitioners and educators regarding the exam format and criteria. Objective and methods: to describe the needed steps to develop the EMLE through a two-phase exploratory mixed-method study that had been conducted among the Egyptian medical sectors: medical practitioners and educators. Results: There were 50 clinical and academic educators shared in the online discussion about EMLE development. Then, a survey was carried out on 266 participants with various working places in which 198 of the participants were staff in the Higher Education Ministry and 68 physicians in the Ministry of Health. The input from both had contributed to the development of the following framework that is divided into two main sections; the Exam Logistics and the Exam Set up. The exam Logistics included the exam committee, prerequisites for the exam, the admission criteria and fees, and the validity of the license. While the Exam Set up included exam setting, structure, standard-setting, pass marks and reset policy. Conclusion: A Multidisciplinary team resources for the exam setting. Fairness and objectivity were highlighted through several factors; development of the exam blueprint, types of assessment methods, post-exam analysis, and standard-setting. Finally, the reset policy, fees, and validity of the license were recommended with a student-centered perspective that was suggested for the exam committee.

The well-being and sociability of individuals have always been part of modernity. The development of new technologies that meet these aspirations is receiving increasing attention. Thus, strengthening the desired objectives of these tools and minimizing their undesirable side effects is the subject of a growing commitment. The present contribution aims, in this context, to evaluate and analyze the desired and undesirable effects of the interaction of electromagnetic fields with living tissues in general. This involves routines reinforcing expected functions as well as those controlling and protecting against undesirable effects. First, the interactions of electromagnetic fields with tissues are analyzed, involving their thermal biological effects of desired and undesired exposures. The roles of blood and sap fluids in bio-affected tissues are then analyzed. Secondly, the governing electromagnetic, bio-heat equations, and their coupled solution are studied. Third, the thermal behavior of tissues and the exposure adverse effects are examined. Next, monitoring and defending of the effects of exposures are discussed. This contribution illustrates and discusses mathematical modeling routines based on a generalized interaction of electromagnetic fields with living tissues.

In this paper, we compile the fractional power series method and the Laplace transform to design a new algorithm for solving the fractional Volterra integro-differential equation. For that, we assume the Laplace power series (LPS) solution in terms of power q=1m,m∈Z+, where the fractional derivative of order α=qγ for which γ∈Z+. This assumption will help us to write the integral, the kernel, and the nonhomogeneous terms as a LPS with the same power. The recurrence relations for finding the series coefficients can be constructed using this form. To demonstrate the algorithm's accuracy, the residual error is defined and calculated for several values of the fractional derivative. Two strongly nonlinear examples are discussed to provide the efficiency of the algorithm. The algorithm gains powerful results for this kind of problem. Under Caputo meaning the obtained results are illustrated numerically, and graphically. Geometrically, the behavior of the solution declares that the changing of the fractional derivative parameter values' in their domain alters the style of the attained solution in a symmetrical meaning and fully coinciding to the ordinary derivative value'. From these simulations, the results report that the recommended novel algorithm is a straightforward, accurate, and superb tool to generate analytic-approximate solutions for Integral, and integro-differental equations of fractional order.

This article's goal is to investigate the structural model that explains how awareness of consequences, subjective norms, attitude and behavior control variables influence plastic wastes behavioral intention in Jeddah's beaches, Saudi Arabia. A quantitative approach was employed. For data analysis, structural equation modeling was used. Based on the literature analysis, the study used a structured questionnaire. Multiple statistical analyses were used to examine the hypotheses. This study conducts a survey on a sample of 390 local tourists to investigate their intention to reduce plastic wastes. To increase the explaining power for behavioral intention, this study extended the TPB by adding awareness of consequences. The study's participants were selected randomly. 340 of them agreed and answered the questionnaire, yielding a percentage response rate 87%. This produced 271 valid questionnaires for data analysis after closely examining the survey. The results demonstrate a positive influence of subjective norms, perceived behavioral control, and consequences awareness on environmental behavioral intention. On the other hand, attitude does not significantly contribute to predict EBI. Governments, legislators, and researchers may use the work's findings to create and execute efficient waste management programs.

Air quality and environmental fairness have always been an area of prime interest across the globe. The significance low-cost air quality sensing and practices spikes during the time of pan-demic and epidemics when the air becomes a threat to living beings especially human beings. The gradual innovation and enrichment in low-cost air quality sensing sensors, nodes or devices, and systems are exponentially increasing for the last three decades. This work reviews the major contributions in a) low-cost scalable air quality assessment; b) low-cost air quality sensors, sensing approaches and technologies; c) low-cost state-of-the-art gas sensors fabrication methods (MEMS and CMOS); d) low-cost gas sensors measurement configurations and assemblies; and e) low-cost air quality sensors calibration and testing systems. A systematic review of past work with a goal to assist end-users, public health facilities, state agencies, researchers, scientists and air quality protection agencies has been rendered in this work. Starting from sensors electrodes to IoT based mobile smart nodes; all have been introduced in this article.

Purpose: To evaluate the efficacy and survival rates of same session ab interno trabeculectomy with the trabectome and Ahmed glaucoma valve implant (AT) in comparison to the Ahmed glaucoma valve alone (A). Method: A total of 107 eyes undergoing primary glaucoma surgery were enrolled in this retrospective comparative case series, including 48 eyes which underwent AT and 59 eyes which received A alone. Participants were identified using the procedural terminology codes, and their medical records were reviewed. The primary outcome measure was surgical success, defined as intraocular pressure (IOP) > 5 mmHg, ≤ 21 mmHg, and IOP reduction ≥ 20% from baseline at two consecutive visits after three months, no reoperation for glaucoma. Secondary outcome measures were IOP, the number of glaucoma medications, incidence of a hypertensive phase, and best corrected visual acuity (BCVA). Results: The cumulative probability of success at one year was 70% in AT, and 65% in A (p=0.85). IOP decreased significantly from 26.6 ± 10.1 mmHg at baseline to 14.7 ± 3.3 mmHg at the final follow-up in AT (p= 0.001). The corresponding numbers for A were 28.8 ± 10.2 and 16.7 ± 4.9, respectively (p= 0.001). The final IOP was significantly lower in AT (p= 0.022). The number of medications at baseline was comparable in both groups (2.6 ± 1.2 in AT and 2.5 ± 1.3 in A, p=0.851). Corresponding number at 1 year visit was 1.2±2 in AT and 2.8±1.8 in A (p=0.001). The incidence of a hypertensive phase was 18.7% in AT and 35.5% in A (p=0.05). HP resolved in only 30% of eyes. The criteria for HP resolution were fulfilled in 9 eyes (30%). There was no difference in the rate of resolution of the hypertensive phase between AT and A (33.3% and 28.5%, respectively, p=0.67). Conclusion: Ahmed glaucoma valve implant with same session trabectome surgery significantly decreased the rate of the hypertensive phase and postoperative IOP as well as the number of glaucoma medications.

Natural product especially secondary metabolites that produced by plants under the stressed condition shown to have a different pharmacological impact. Aeluropus lagopoides is one of the typical halophyte plants survivals under stressed conditions. It has been used for wound healing and as a painkiller. The bioactivity and the chemical composition of this plant have poorly investigated. Consequently, chemical components of A. lagopoides leaves were extracted using hexane (nonpolar), ethyl acetate (semi-polar), n-butanol (polar) to extract the most extensive variety of metabolites. The cytotoxicity and anticancer impact of extracted secondary metabolites evaluated against breast (MCF-7), colon (HCT-116), and liver (HepG2) cancer cell lines using SRB test. The mechanism of action verified by observing the appearance of apoptotic bodies using the fluorescent microscope while their antiproliferative impact had been evaluated using flow cytometer. Results revealed that secondary metabolites extracted using hexane and ethyl acetate were having the highest cytotoxicity and thus anticancer activity effect on HepG2 with IC₅₀ (24.29 ± 0.85, 11.22 ± 0.679 µg/mL) respectively. Where apoptotic bodies observed, flow cytometer results exhibited that secondary metabolites can inhibit cell cycle in G0/G1 phase. Accordingly, A. lagopoides hexane and ethyl acetate extracts may consider as a candidate anti-cancer drug.

Coronavirus (COVID19) appears to be an inflection point that is forcing a disruption in medical education. However, it is not clear what the responses of the institutions are to this pandemic and how the adaptation of new methods may impact medical education in the post COVID-19 era. Objective: The study aims to explore how medical schools in Egypt responded to COVID-19 pandemic regarding the teaching and learning/assessment for undergraduate students. Design: A mixed method exploratory two-phase study was conducted. A survey was prepared and disseminated to a convenient non-probability sample of the medical school faculty through various social platforms. Then, a focus group guide was conducted to explore in more depth the findings. Results: The staff level of preparedness for that unexpected shift was evaluated by 55.1% of the survey participants as optimum to high and a good leadership support was reported by 70 % of them. They reported conflicting views about the proper role of medical education units but reinforced the idea of Egyptian Knowledge Bank’s crucial role in this transition. Additionally, there is a communication problem with the students that leads to their detachment. Subsequently, 84.6 % of the participants reported that their schools used alternative teaching methods for small groups, large groups, pre-clinical and clinical clerkships. However, 64.1 % of the participants identified a clinical skills teaching challenge. Although, 68.4% reported that alternative methods were used for formative assessment but absence of alternative methods for summative assessment was declared by 76.3%. Conclusions: Individuals moved faster than bodies and relied on support existing outside the universities when catastrophe happened. However, institutes which have experience in adapting modern engaging learning methods should organize a better response for crisis. Online learning should be integrated in the curriculum with a fair percentage especially in the early years of medical study.

Automotive aerodynamics comprises of the study of aerodynamics of road vehicles. Its main goals are reducing drag, minimizing noise emission, improving fuel economy, preventing undesired lift forces and minimizing other causes of aerodynamic instability at high speeds. The Ahmed body has the form of a highly simplified car, consisting of a blunt nose with rounded edges fixed onto a box-like middle section and a rear end that has an upper slanted surface, the angle of which can be varied. It retains vital features of real vehicles in order to study the flow fields around it and the related turbulence models which characterizes the actual flow at elevated Reynolds number. In the present study, the aerodynamic behavior of this body is investigated numerically by the aid of commercial CFD tool: Ansys Fluent. The results of the simulation are validated with available experimental data and results of the simulations from other literatures. The numerical data were obtained for a fixed free stream velocity of 25 m/s at the inlet. The simulations were performed at a fixed slant angle of 25 degree and zero yaw angle. The present study focuses on how local refinement of mesh inside the concerned body and the outside, helps affect the results and for which grid dependency test is the primary objective of this paper. The present study also helps demonstrate how the drag of the body behaves, which is mainly the effect of pressure drag force generated at the rear portion of the body. The study also focuses on important properties like the velocity magnitude at different locations for different meshing cases, and to capture the flow pattern in the front or near the wake region. The study can be further helpful to future researchers in determining resistance, fuel efficiency etc. helping designers to optimize in specialized areas for better efficiency.

Atrial Fibrillation (AF) is known as one of the dominant cardiac disease that is associated with severe consequences such as risk of strokes. This cardiac arrhythmia can be efficiently diagnosed using EEG signals. However, AF episodes in EEG records are not always permanent for all subjects. In addition, lengthy subject preparation and ECG recording sessions makes this practice time consuming and not attractive for efficient diagnosis. One attractive solution for this problem will be the use of wearable Internet of Medical Things IoMT devices for EEG recording and AF detection. From another side the use machine learning for efficient diagnosis could provide high accurate diagnosis. However, the deployment of these wireless wearable devices faces the problems of limited processing capabilities and of energy scarcity. In this context, the design of energy efficient accurate on-sensor AF detection scheme using machine learning algorithms still requires a focused research effort. This paper proposes a wearable solution for ECG-based processing scheme for embedded AF detection. The proposed method achieved 100% sensitivity and 94.5% of specificity and accuracy of around 97.4 % for wide range of subjects while showing low energy-consumption. The obtained results show the efficiency of using Logistic Regression algorithm for accurate AF detection and attest about practical feasibility of the proposed approach in wearable IoMT devices.

This article aims to assess, discuss and analyze the disturbances caused by electromagnetic field (EMF) noise of medical devices used nearby living tissues, as well as the corresponding functional control via the electromagnetic compatibility (EMC) of these devices. These are minimally invasive and non-ionizing devices allowing various healthcare actions involving monitoring, assistance, diagnosis and image-guided medical interventions. Following to an introduction of the main items of the paper, the different imaging methodologies are conferred, accounting for their nature, functioning, employment condition and patient comfort and safety. Then the magnetic resonance imaging (MRI) components and their fields, the consequential MRI-compatibility concept and possible image artifacts are detailed and analyzed. Next, the MRI-assisted robotic treatments, the possible robotic external matter introductions in the imager, the features of MRI-compatible materials and the conformity control of MRI-compatibility, are analyzed and conferred. Afterward, the embedded, wearable and detachable medical devices, their EMF perturbation control and their necessary shielding protection technologies are presented and analyzed. Then, the EMC control procedure, the EMF governing equations, the body numerical virtual models, are conferred and reviewed. A qualitative methodology, case study, simple example illustrating the mentioned methodology is presented. The last Section of the paper discussed potential details and expansions of the different notions conferred in the paper, in the perspective of monitoring the disturbances due to EMF noise of medical devices working near living tissues.

This paper introduces a novel algorithm for solving the point-to-point shortest path problem in a static regular 8-neighbor connectivity (G8) grid. This algorithm can be seen as a generalization of Hadlock algorithm to G8 grids, and is shown to be theoretically equivalent to the relaxed A* (RA*) algorithm in terms of the provided solution's path length, but with substantial time and memory savings, due to a completely different computation strategy, based on defining a set of lookup matrices. Through an experimental study on grid maps of various types and sizes (1290 runs on 43 maps), it is proven to be 2.25 times faster than RA* and 17 times faster than the original A*, in average. Moreover, it is more memory-efficient, since it does not need to store a G score matrix.

Indoor air quality and public health have always been an area of prime interest across the globe. The significance of low-cost air quality sensing and indoor public health practices spikes during the time of pandemic and epidemics when indoor air pollution becomes a threat to living beings especially human beings. Indoor diseases are hard to diagnose if they are due to the indoor environmental conditions. A major challenge was observed in establishing a baseline between the indoor air quality sensors and associated diseases. In this work, 10,000+ articles from top literature databases were reviewed using bibliometric analysis to formulate indoor air quality sensors and diseases correlation rubrics to critically review 500+ articles. A set of 200+ articles were selected based on for detailed study based on seven bibliometric indices for publications that used WHO, NIH, US EPA, CDC, and FDA defined principles. This review has been conducted to assist end-users, public health facilities, state agencies, researchers, scientists and air quality protection agencies.

The current COVID19 pandemic has raised huge concerns for outdoor air quality due to expected lungs deterioration. These concerns include the challenges in the scalable prediction of harmful gases like carbon dioxide, iterative/repetitive inhaling due to mask and environmental temperature harshness. Even in the presence of air quality sensing devices, these challenges lead to failed planning and strategy against respiratory diseases, epidemics, and pandemics in severe cases. In this work, a dual time-series with bi-cluster sensor data-stream-based novel optimized regression algorithm was proposed with optimization predictors and optimization responses that use automated iterative optimization of the model based on the similarity coefficient index. The algorithm was implemented over SeReNoV2 sensor nodes data, i.e. multi-variate dual time-series of environmental and US Environmental Protection Agency standard sensor variables for air quality index measured from air quality sensors with geospatial profiling. The SeReNoV2 systems were placed at four locations that were 3 km apart to monitor air quality and their data was collected at Ubidots IoT platform over GSM. Results have shown that the proposed technique achieved a root mean square error (RMSE) of 1.0042 with a training time of 469.28 seconds for normal and RMSE of 1.646 in the training time of 28.53 seconds for optimization. The estimated R-Squared error of 0.03 with Mean-Square Error for temperature 1.0084 ᵒC and 293.98 ppm for CO2 was observed. Furthermore, the Mean-Absolute Error (MAE) for temperature 0.66226 ᵒC and 10.252 ppm for CO2 at a prediction speed of ~5100 observations/second for temperature 45000 observations/second for CO2 due to iterative optimization of the training time 469.28 seconds for temperature and 28.53 seconds for CO2 was very promising in forecasting COVID19 countermeasures before time.

The classical joint economic lot-sizing (JELS) policy in a single-vendor single-buyer system generates an equal production quantity in all cycles, where the input parameters remain static indefinitely. In this paper, a new two-echelon supply chain inventory model is developed involving a hybrid production system that simultaneously focuses on green and regular production methods with optimal allocation fraction of green and regular productions. Unlike the classical mathematical formulation, each cycle is independent from the previous one, and consequently, the input parameters can be adjusted to be responsive to the dynamic nature of demand rate and price fluctuation. A rigorous heuristic approach is used to derive a global optimal solution for a joint hybrid production system. The model accounts for carbon emissions from production and storage activities related to green and regular produced items along with transportation activity under a multi-level emission-taxing scheme. The results emphasize the significant impact of green production on emissions. That is, the higher the allocation fraction of green production the lower the total amount of emissions generated by the system, i.e., the system becoming more sustainable. Adopting a hybrid production method not only decreases the greenhouse gas (GHG) emissions dramatically, but also reduces the per unit time total cost when compared with regular production. One of the main findings is that the total system cost generated by the base closed-form formula of the proposed model is considerably lower than that of the existing literature i.e., 33.59% (16.13%) lower in the first cycle (subsequent cycles) when the regular production method is assumed. Moreover, the optimal production rate generated by the proposed model is the one that minimizes the emissions production function. Illustrative examples and special cases that reflect different realistic situations are compared to outline managerial insights.

The mathematical modelling of reverse logistics inventory systems ignores that returned items may arrive out of sequence, i.e. with different number of remanufacturing times. Moreover, such modelling assumes that the retuned items may retain the same quality upon recovery regardless of how many times they have been previously remanufactured. This paper develops a new mathematical expression of the percentage of retuned items that can be remanufactured a finite number of times. The proposed expression is modelled as a function of the expected number of times an item can be remanufactured on its life cycle and the number of times an item can be technologically (or optimally) remanufactured based on its quality upon recovery. The model developed in this paper considers joint production and remanufacturing options. The return rate is a varying demand dependent rate, which is a decision variable with demand, product deterioration, manufacturing and remanufacturing rates being arbitrary functions of time. The model considers the initial inventory of returned items in the mathematical formulation, which enables decision makers to adjust all functions and input parameters for subsequent cycles. Illustrative examples indicate that dependent purchasing price of recovery items and the incorporation of remanufacturing investment cost significantly impact on the optimal remanufacturing policy.

Natural calamities observation, study and simulation has always been a prime concern for disaster management agencies. Billions of dollars are spent annually to explore geo-seismic movements especially earthquakes but it has always been a unique accident. The real-time study of seismic waves, ground motions, and earthquakes always needed a programmable mechanical structure capable of physically producing the identical geo-seismic motions with seismology domain definitions. A programmable multi-parametric five degrees of freedom electromechanical seismic wave events simulation platform to study and experiment seismic waves and earthquakes realization in the form of geo-mechanic ground motions is exhibited in this work. The proposed platform was programmed and interfaced through an IoT cloud-based Web application. The geo-mechanics was tested in the range of i) frequencies of extreme seismic waves from 0.1Hz to 178Hz; ii) terrestrial inclinations from -10.000° to 10.000°; iii) velocities of 1km/s to 25km/s iv) variable arrival times 1us to 3000ms; v) magnitudes M1.0 to M10.0 earthquake; vi) epi-central and hypo-central distances of 290+ and 350+ kilometers. Wadati and triangulation methods have been used for entire platform dynamics design and implementation as one of key contributions in this work. This platform is as an enabler for a variety of applications such as training self-balancing and calibrating seismic-resistant designs and structures in addition to studying and testing seismic detection devices as well as motion detection sensors. Nevertheless, it serves as an adequate training colossus for machine learning algorithms and event management expert systems.

Objectives: Human herpes viruses can cause life-threatening diseases in immunocompromised children, especially leukemic patients. Therefore, the aim of this study is to detect the human herpes viruses (HHV1-7) and to investigate its clinical significance in Middle Eastern Pediatric Leukemia Patients by using 2 Independent PCR assays. Methods: Detection of human herpes virus DNA has been done in blood samples of 200 pediatric leukemia patients in addition to 90 blood donors as a control group using multiplex PCR assays. When a ‘‘positive’’ result was observed, real-time PCR was performed to measure the viral load. Results: The most frequent herpes virus infection in Middle Eastern Pediatric Leukemia cases was CMV, followed by EBV, then HHV6, VZV, HHV7, HSV1, and HSV2, where they were 92/200 (46%), 76/200 (38%), 72/200 (36%), 48/200 (24%), 12/200 (6%), 8/200 (4%), and 2/200 (1%) respectively. Also, there was a statistically significance difference between leukemic patients and their controls regarding CMV, EBV, HHV6, and VZV (P <0.05). Correlation between percentage of co-infection, and clinical parameters for the 7 herpes viruses has been studied, and there is an increase in absolute neutrophilic count (ANC), total leukocyte count (TLC) and duration of fever and neutropenia in age group 6-11 years for HHV6/CMV, then in age group 12-18 years especially for EBV/CMV and CMV/HHV6. Also, our results show that multiplex PCR assay is close to single PCR assay in relation to specificity and sensitivity which in turn prove its validity for early diagnosis of herpes viral infection. Conclusions: Adopting multiplex PCR technique is helpful in screening of virus infections. It will save time, effort, cost effective and will assist in rapid diagnosis. However, the clinical relevance of the virus infection needs to be evaluated by quantitative real-time PCR which in turn will help patient's management by using appropriate antiviral treatment.

This paper presents preliminary operational performance results of a pilot grid-connected photovoltaic (PV) system designed and installed on the rooftop of the Ministry of Petroleum, Energy and Mining headquarter in Nouakchott (latitude of 18.1°N and the longitude of 16.0°W), Mauritania. The aim is for the government to demonstrate the relevance of using solar energy and to encourage the uptake of solar PV technology for commercial and residential building applications in Mauritania.. In this study, the grid-connected PV system has a peak power of 48 kW and the performance monitoring was carried out during one year, with a system that allow to measure DC power, inverter and system conversion efficiency, energy generated by the PV arrays, solar radiation in the inclination plane of panels, ambient temperature and module temperature. During this period, the PV plant was found to supply 65,668 kWh to the grid. The final yield ranged from 3.91 to 5.09 kWh/kWp/day. The performance ratio was found to vary from 69.69% to 89.35% and the annual capacity factor was found to be 19%. Finally, performance parameters were compared with other PV plants installed in the same region of Northern Africa. The outcome of this work is deemed important in assisting accurate PV system design and decision-making.

Pruning is an important part in controlling the branching, good fruit size, and prodctivity of fruit trees. and consequently, ‘Valencia’ orange trees were grown many years ago, the trees were suffering from a decline in productivity in the newly reclaimed lands after certain years of plantation. This study elucidated the effect of pruning severity on growth, yield and fruit quality of ‘Valencia’ orange trees. Four levels of pruning were applied on 35 years old ‘Valencia’ orange trees as follows: T1: Control (un-pruned), T2: Light pruning ( 25% of main branches were removed); T3: Moderate pruning (50% of main branches were removed) and T4: Heavy pruning: 75% of main branches were removed. The treatments were done in February 15th (for each season). The results indicated that pruning severity increased vegetative growth paraments such as shoot length and leaf area and decreased canopy volume of Valencia orange trees in comparison to control. Maximum yield was gained from 75% followed by 50% and 25% pruning severity treatment. The pruning treatments improve in fruit weight, size, firmness, juice content, TSS%, TSS/acid ratio and vitamin C content. In addition, pruning produced an increasing in fruit yield per tree as well as yield increasing %. Hence, it might be concluded that pruning at different severity applied in February can be used effectively on ‘Valencia’ orange trees to improve vegetative growth, fruit physical and chemical properties. Besides, increasing fruit yield by nearly 20% in comparison to control.

E-commerce is a rapidly evolving global trend that is having a significant impact on consumer behavior and business strategies. Despite its growing impact, e-commerce adoption by Moroccan firms remains low and research on this topic in this context is scarce. This study aims to fill this gap by investigating the main determinants influencing e-commerce adoption by Moroccan firms. We use logit, probit, and conditional mixed process-probit models to identify the critical factors driving e-commerce adoption. Our results reveal five key findings. First, newer firms that are more open to innovation and change are more likely to adopt e-commerce. Second, firms with a higher proportion of highly educated employees are more likely to adopt e-commerce. Third, the digital skills of new employees do not directly influence the likelihood of e-commerce adoption. Fourth, being listed on digital platforms increases the likelihood of e-commerce adoption. Finally, there is a positive relationship between firms engaged in innovation activities and e-commerce adoption. These findings highlight the need for additional investment in promoting modern organizational practices, reskilling workers, and implementing advanced technologies to facilitate effective e-commerce integration among Moroccan SMEs. By addressing these challenges, Moroccan firms can harness the full potential of e-commerce and contribute to the country’s economic growth and digital transformation.

Swift and diligent resilience response is mandatory in sustainable geo-distributed ecosystems. The real-time geo-spatial resilience requires agility in millions of parallel and distributed data processing tasks on data acquired from regional condition monitoring(RCM) systems. These tasks include expiditous resolution of complex sustainability conflict sets, promptly anomalies characterization in chaos sets, and resilience response uniqueness. This work is an archetype of a paragon geo-resilience support system(GRSS) for regional sustainability using a novel melioration in DADO production machine. The proposed expert system capitalized the synergic strengths of RETE, TREAT, LEAPS and GATOR networks was designed and implemented as a synthetic DADO machine(SDM). The generic architecture of DADO machine was improved in this work by enrichment in rule set conditions and solution set for regional scale resilience rule set conditions. The condition left-hand side(LHS) X equal to the solution set 2X for right-hand side (RHS) was the goal achieved by working memory(WM) optimization and conflict resolution strategy(CRS) in alpha and beta networks rules. A round-trip time of 80.2 seconds for first event response set using 1492 segment size and sequence number 360,000 with maximum packets at a single geospatial structure was 21 packets/sec was a noticeable landmark in this work. LEAPS and Concurrent-read algorithm for GATOR cluster networks in the proposed synthetic DADO machine architecture was the overall implementation that enabled urban scale resilient system practically possible on physical SHM deployment.

The transition to sustainable energy systems in the Middle East and North Africa (MENA) region addresses critical challenges of environmental protection, energy security, and socio-economic resilience. Using neo-institutional theory, this paper examines the intricate relationship between formal and informal institutions and their significant impact on the region’s energy transition. Despite the MENA region’s abundant renewable energy resources, numerous institutional barriers, such as governance inefficiencies, regulatory inconsistencies, and entrenched socio-cultural norms, significantly hinder this transition. Through a review of existing literature, this study presents a comprehensive analytical framework designed to overcome these barriers, with a focus on the Just and Sustainable Energy Transition model. This strategic model emphasizes equity, sustainability, and inclusive governance as pillars for reform. The study offers detailed recommendations for institutional change and underscores the importance of collaborative efforts among governments, industry stakeholders, and international partners to unlock the MENA region’s renewable energy potential, advance global sustainability goals, and ensure a more secure and resilient energy future.

This paper presents a study conducted to identify, assess, rank, and compare the most influencing factors causing schedule delay during construction phase of petrochemical projects in Saudi Arabia. The methodology followed in this research to achieve the main aims is a combination of comprehensive review of the literature and interviewing number of local experts, which have resulted in identifying of 23 factors. Through a web-based questionnaire survey, the identified factors were ranked. Total of 90 completed responses were gathered from 106 received responses. The completed responses gathered from 38 contractors and 52 owners. Of 90 participants, there are 32 project managers, 22 project engineers, 7 construction supervisors and the other 31 having different positions in projects departments The study has found that the most influencing factors causing schedule delay during construction in petrochemical projects in Saudi Arabia are “Poor site management and supervision by contractors”; “Conflict between main contractor and subcontractor”; “poor planning and scheduling of projects by contractor”; “Delay of material or equipment delivery”; and followed by “Delay in Handing Over Construction Site to Contractor”. This paper is original in the sense that the areas of knowledge and practice covered in the identified factors were distributed and not available in one source. The factors are derived from personal interviews with selected project managers, project engineers, construction supervisors and the others from different positions in project department and from the relevant literature.

Background and Objectives: In the current Covid-19 pandemic, children below the age of 12 could manifest Covid-19 symptoms and serve as a reservoir for the virus in the community. The present study was conducted to evaluate the reactogenicity, and immunogenicity of BBIBP-CorV, prior to involving this age group in the vaccination program in the kingdom of Bahrain. Subjects and Methods: The study included 582 children from 3 to 12 years old of Bahraini and non-Bahraini nationality, all of which contributed to the reactogenicity study. Of those, 401 contributed to the immunogenicity study. All children received 2 doses of BBIBP-CorV inactivated virus 3 weeks apart. To assess reactogenicity, children were followed up for 5 weeks to evaluate any vaccine-related adverse events (AE). To assess immunogenicity, blood was collected on day 0 and day 35 to assess antibody titer against S, N, and neutralizing antibody. Results: Of the 582 participants, (45.4%) were female, (54.61%) were male, with 49% in 9-12 age group. Of the 401 children contributing to the immunogenicity study, 274 (68.3%) had no prior exposure to Covid-19. The overall incidence of AE was 27.7%. No significant difference was found among different age groups. The most frequent AE was local (at the injection site) and occurred in 16% of children, followed by fever in 9.3%. No serious adverse events were reported. The Seroconversion rate was 100% among children with no prior exposure to Covid-19. Children with previous Covid-19 exposure had higher averages of anti-S (2379 U/ml compared to 409.1), anti-N (177.6 U/ml compared to 30.9) and neutralizing antibody (93.7 U/ml compared to 77.1) than children with no prior exposure at day 35. Conclusions: Two doses of COVID-19 BBIBP-CorV on the subjects aged between 3 to 12 has good safety and tolerance and can induce an effective immune response and neutralizing antibody titer.

In this study, we mainly focus on the behavior of an electron gas produced by argon plasma that is bounded by a moving rigid flat plate. The effects of an external magnetic field on the electrons collected with each other, with positive ions, and with neutral atoms in the plasma fluid are investigated. We used the BGK model of the Boltzmann kinetic equation, which is fundamental in the study of the gas dynamics from the continuum flow to the free-molecular regimes with Maxwellian velocity distribution functions of the various species. An exact analytical solution of the model equations for the unsteady flow is given using the moment and the traveling wave methods. The behavior of the mean velocity of electrons is illustrated, which compatible with the variation of the shear stress, viscosity coefficient, and the initial and boundary conditions. Besides, the thermodynamic prediction is investigated by applying the principles of irreversible thermodynamics and Gibbs formula. It is found that the thermodynamic variables verify the Boltzmann’s H–theorem, the principle of Le Chatelier, and the Thermodynamics Second Law for the non-equilibrium processes of the system. Qualitative agreements with previous related papers are introducing. 3-Dimensional graphics for the calculating variables are offering, and their behavior is deeply discussed.

In view of intensified disasters and fatalities caused by natural phenomena and geographical expansion, there is a pressing need for a more effective environment logging for a better management and urban planning. This paper proposes a novel utility computing model (UCM) for structural health monitoring (SHM) that would enable dynamic planning of monitoring systems in an efficient and cost-effective manner. The proposed UCM consists of network-attached data drive that stores data from SHM logger, population count system and Geographic Information System (GIS) enhanced with a Cloud IoT data backup, display, and analysis server. The UCM using this data and data from building information systems applies a simple machine learning algorithm to generate real-time structure health and suggests re-planning of SHM units. The health of structure varies dynamically with disturbances created by higher occupancy and structure density per zone. The proposed SHM-UCM is unique in terms of its capability to manage heterogeneous SHM resources. This was tested in a case study on Qatar University (QU) in Doha Qatar, where it looked at where SHM nodes are distributed along with occupancy density in each building. This information was taken from QU simulated occupation and zone calculation models and then compared to ideal SHM system data. Results show the effectiveness of the proposed model in logging and dynamically planning SHM.

Plaque psoriasis is a common, long-lasting illness that affects the immune system and causes significant negative impacts on a patient's physical health, well-being, and ability to work effectively. Deucravacitinib (DEU) is the first oral medication used in the treatment of plaque psoriasis, a chronic skin condition that causes red, scaly patches on the skin. DEU is a type of medication called an oral Janus kinase (JAK) inhibitor, which works by blocking specific enzymes that play a role in the inflammation and immune response associated with psoriasis. Therefore, a quick, easy, novel, reliable, sensitive, and straightforward Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) approach was used to analyse DEU in plasma samples. The LC-MS/MS method for the determination of DEU in human plasma was based on using trimethoprim as an internal standard (IS). The separation of DEU and IS was carried out via liquid-liquid extraction (LLE). The isolated substances were then subjected to the chromatographic system using the ACE-C18 column (4.6x100 mm, 5 µm). The mobile phase employed consisted of methanol and a solution of 2 mM ammonium formate (80:20 v/v, respectively). The flow rate used was set at 0.9 mL min-1. The creative strategy was performed by running an ABSCIEX API 4000 mass spectrometer with an electron spray ionization source in Multiple Reaction Monitoring (MRM) modes. The ion transitions m/z 426.3  358.2 was used for DEU quantitation, while the ion transitions m/z 291.1  261.1 was used for trimethoprim quantitation. The accuracy, precision, linearity, recovery, and selectivity of DEU were deemed acceptable when validated for a concentration range between 0.500 to 601.050 ng/mL, utilizing a weighting factor of 1/x2.

Salinity is the most significant abiotic stress affecting crop yield worldwide, breeders are Salinity is the most important abiotic stress limiting crop production throughout the world, and breeders are encouraged to test novel genotypes for their resistance to this selection agent. However, getting a sufficient number of plants for the evaluation can be a lengthy and time-consuming procedure that might be shortened by applying in vitro techniques. An experiment was conducted under controlled saline circumstances using a tissue culture technique to investigate the influence of salt on several physic-biochemical parameters. Micro-shoots of Volkamariana lemon, sour orange, trifoliate orange, and Cleopatra mandarin rootstocks were re-cultured on MS media supplemented with NaCl from 25, up to 150 mM. Following the experiments, all of the tested rootstocks' morphological and biochemical characteristics, stomata behavior, and element accumulation were measured. As a result, adding NaCl from 25 to 150 mM to MS media caused a reduction in all morphogenetic parameters such as shoot number, shoot length, leaves number, and survival percentage was measured compared with control. Photosynthesis pigment, RWC, K, and Ca ions were decreased by increasing NaCl from 100 to 150 mM. On the contrary, proline, Cl, and Na were increased. Cleopatra mandarin and Trifoliate orange are more tolerant to salt stress than Volkamariana lemon and sour orange citrus.

Despite of being an exceptionally biodiversity rich country, the forest coverage of Bangladesh is declining at an alarming rate. Declaration and management of protected areas in this regard is one of the efforts from government side to tackle the loss of biodiversity. The limited numbers of forest-protected areas (FPA), established to conserve the dwindling forest biodiversity of the country with high pressure on them for timber, non-timber forest products, and fuelwood - makes their management challenging. Moreover, most of the FPAs of the country declared only in the recent decades with very limited infrastructure, manpower and policy support for monitoring and governance. Some people-centred approaches for the management of FPAs and alternative livelihood and income generation subsidies although made available through a few project interventions, their number are still inadequate and performance remains less than satisfactory. This chapter provides a critical review of the FPAs of Bangladesh looking at their role in biodiversity conservation, management challenges, and key lessons from previous management interventions with recommendations for the future. It has been revealed that the FPA system of Bangladesh still poorly represents the diverse forest ecosystems with relatively small forest size and lack of corridors for the movement of wildlife. There are ample opportunities to render co-management of FPAs an effective strategy to minimize the conflicts in FPAs management in the country. It is, however, important to ensure the access of local forest-dependent people to different alternative income generating options that may adequately support their livelihoods.

Breast cancer is the most common cause of death for women worldwide. Thus, the ability of artificial intelligence systems to predict and classify breast cancer is very important. In this paper, a hybrid ensemble method classification mechanism is proposed based on a majority voting mechanism. First, the performance of different state-of-the-art machine learning classification algorithms for the Wisconsin Breast Cancer Dataset (WBCD) were evaluated. The three best classifiers were then selected based on their F3 score. F3 score is used to emphasize the importance of false negatives (recall) in breast cancer classification. Then, these three classifiers, simple logistic Regression learning, stochastic gradient descent learning and multilayer perceptron network, are used for ensemble classification using a voting mechanism. We also evaluated the performance of hard and soft voting mechanism. For hard voting, majority-based voting mechanism was used and for soft voting we used average of probabilities, product of probabilities, maximum of probabilities and minimum of probabilities-based voting methods. The hard voting (majority-based voting) mechanism shows better performance with 99.42% as compared to the state-of-the-art algorithm for WBCD.

In the upper charged layers of the atmosphere, the plasma is very rarefied. The collisions between its molecules are almost non-existent, and the driving forces behind them are the Lorentz forces resulting from the electric and magnetic fields. For this reason, we are interested in studying the behavior of non-collision plasmas because of its essential applications, such as the movement of satellites in the charged atmosphere. In this paper, the flow problem of collisionless gaseous plasma is examined. For that propose, we solve the unsteady Vlasov-Maxwell system of non-linear partial differential equations analytically. Methods of moments and traveling wave parameters are used to acquire an exact solution. Specific macroscopic properties of collisionless gaseous plasma are calculated along with electrical and magnetic fields. Further, thermodynamic estimation, such as entropy and entropy production, is presented. Those calculations allow us to measure the consistency with the laws of non-equilibrium thermodynamics. Relations between internal energy modification participations are predicted using Gibbs' equation for collisionless plasma. The modification effect of internal energies due to electro-magnetic fields is found to be small compared with the internal energy change due to the effect of entropy. That is because these fields are self-induced by plasma particles due to the sudden movement of the rigid plane plate. The results are accomplished according to the typical argon gaseous plasma model. Three-dimensional diagrams showing the measured variables are drawn to investigate and discuss their behavior. The problem has many commercial applications for the movement of objects in the charged atmosphere.

Annually, more than 1.5 million preventable new hepatitis B (HBV) infections continue to occur, with an estimated global burden of 296 million individuals living with chronic hepatitis B infection. This substantial health challenge results in over 820,000 annual deaths attributed to complications such as liver cirrhosis and hepatocellular carcinoma (HCC). HBV vaccination remains the cornerstone of public health policy to prevent chronic hepatitis B and its related complications. It serves as a crucial element in the global effort to eliminate HBV, as established by the World Health Organization (WHO), with an ambitious 90% vaccination target by 2030. However, reports on global birth dose coverage reveal substantial variability, with an overall coverage rate of only 46%. This comprehensive review thoroughly examines global trends in HBV vaccination coverage, investigating the profound impact of vaccination on HBV prevalence and its consequences across diverse populations, including both high-risk and general demographics. Additionally, the review addresses the formidable challenges and facilitating factors essential for achieving WHO's HBV vaccination coverage objectives and elimination strategies in the coming decade and beyond.

In this work, a new flexible antenna integrated with OLED light sources is presented for WiMAX wireless communication systems. The proposed antenna was placed on a 100% polyester base with a thickness of 1.5 mm and achieved a high gain. We evaluated and tested its performance, including reflection coefficient, radiation pattern and gain. The flexible and simple patch antenna has been designed to operate at 3.5 GHz for WiMAX wireless communication systems with a gain value of 5.38 dB. This article proves the applicability of the proposed material for the integration of flexible antennas in OLEDs while maintaining gain performance similar to conventional flat antennas.

This study delves into the dynamic field of medical education research, emphasizing the integration of research training within medical curricula. It seeks to understand the impact of such integration on the competencies of future medical professionals. The primary aim is to systematically categorize and analyze the current trends and future directions in medical education research. This involves assessing the influence of research training on medical students' skills and the methodologies used in such research. Methods: The research employs an extensive bibliographic literature review across multiple databases. It classifies studies into categories like experiential or case studies, editorials, and original research articles. This classification is based on criteria such as geographical location, research objectives, theoretical frameworks, and methodologies. Results: Findings reveal a diverse landscape in medical education research, with a significant emphasis on research training. The research showcases varying methodologies and approaches used globally, highlighting the thematic focus and geographical distribution of these studies. Conclusion: Medical education research is a globally expansive and evolving field. It underscores the importance of continuous investigation, particularly focusing on integrating research elements at curricular levels and exploring innovative educational strategies. The study also points out potential gaps in research, especially in underrepresented regions, indicating directions for future research efforts.

This article presents the development of an innovative Maximum Power Point Tracking (MPPT) strategy, utilizing a Particle Swarm Optimization (PSO) algorithm to improve the effectiveness of PV systems and expedite convergence. The new MPPT method incorporated a unique Swarm Self-Reinforcement Mechanism (SSRM) within the PSO algorithm, targeting quick convergence and excellent tracking accuracy. This approach enables the PSO to eliminate the fitness function that has the lowest value and subsequently reinforce it in the next iteration, revolving around the global maximum power point (GMPP). By applying this novel PSO-based method, the MPPT performance of PV systems was significantly improved, facilitating the algorithm to proficiently navigate through the solution space and quickly locate the GMPP, even in rapidly changing environmental conditions. The outcomes derived from this novel approach were contrasted with other algorithmic optimization methods, validating its superior convergence speed and tracking accuracy. Different swarm sizes were examined using SSRM, and the optimal swarm size for the system employing MPPT was identified to achieve the lowest convergence time (CT). The results showcased the impressive performance capabilities of this novel strategy, resulting in a time con-traction of up to 28% compared to the conventional PSO technique, where the optimal swarm size was found to be 5. This achievement marks a significant milestone in the evolution of PSO-based MPPT techniques, and paves the way for future advancements in this exciting field.

Efficient energy extraction in photovoltaic (PV) systems relies on the effective implementation of Maximum Power Point Tracking (MPPT) methods. Conventional MPPT techniques often suffer from slow convergence speeds and suboptimal tracking performance, particularly under dynamic variation of environmental conditions. Smart optimization algorithms (SOA) using metaheuristic optimization algorithms can avoid this limitation inherent in the conventional MPPT methods. The problem of slow convergence of the SOA is avoided in this paper using a novel strategy called Swarm Size Reduction (SSR) utilized with Particle Swarm Optimization (PSO) algorithm, specifically designed to achieve short convergence time (CT) while maintaining exceptional tracking accuracy. The novelty of the proposed MPPT method introduced in this paper is the dynamic reduction of the swarm size of the PSO for improved performance of the MPPT of the PV systems. This adaptive reduction approach allows the algorithm to efficiently explore the solution space of PV systems and rapidly exploit to identify the global maximum power point (GMPP) even under fast fluctuation of uneven solar irradiance and temperature. This pioneering ultra-fast MPPT method represents a significant advancement in PV system efficiency and promotes the wider adoption of solar energy as a reliable and sustainable power source. The novel adaptive PSO algorithm also opens new possibilities for further innovations in optimization-driven applications, extending its potential impact on a diverse range of real-world challenges. The results obtained from this proposed strategy are compared with several optimization algorithms to validate its superiority.

Background: Renal cancers are among the top ten causes of cancer-specific mortality, of which the ccRCC subtype is responsible for most cases. The grading of ccRCC is important in determining tumour aggressiveness and clinical management. Objectives: The objectives of this research were to predict the WHO/ISUP grade of ccRCC pre-operatively and characterise the heterogeneity of tumour sub-regions using radiomics and ML models, including comparison with pre-operative biopsy-determined grading in a sub-group. Methods: Data were obtained from multiple institutions across two countries, including 391 patients with pathologically proven ccRCC. For analysis, the data were separated into four cohorts. Cohorts 1 and 2 included data from the respective institutions from the two countries, cohort 3 was the combined data from both cohort 1 and 2, and cohort 4 was a subset of cohort 1, for which both the biopsy and subsequent histology from resection (partial or total nephrectomy) were available. 3D image segmentation was carried out to derive a voxel of interest (VOI) mask. Radiomics features were then extracted from the contrast-enhanced images, and the data were normalised. The Pearson correlation coefficient and the XGBoost model were used to reduce the dimensionality of the features. Thereafter, 11 ML algorithms were implemented for the purpose of predicting the ccRCC grade and characterising the heterogeneity of sub-regions in the tumours. Results: For cohort 1, the 50% tumour core and 25% tumour periphery exhibited the best performance, with an average AUC of 77.9% and 78.6%, respectively. The 50% tumour core presented the highest performance in cohorts 2 and 3, with average AUC values of 87.6% and 76.9%, respectively. With the 25% periphery, cohort 4 showed AUC values of 95.0% and 80.0% for grade prediction when using internal and external validation, respectively, while biopsy histology had an AUC of 31.0% for the classification with the final grade of resection histology as a reference standard. The CatBoost classifier was the best for each of the four cohorts with an average AUC of 80.0%, 86.5%, 77.0% and 90.3% for cohorts 1, 2, 3 and 4 respectively. Conclusion: Radiomics signatures combined with ML have the potential to predict the WHO/ISUP grade of ccRCC with superior performance, when compared to pre-operative biopsy. Moreover, tumour sub-regions contain useful information that should be analysed independently when determining the tumour grade. Therefore, it is possible to distinguish the grade of ccRCC pre-operatively to improve patient care and management.

Consumption is thus fundamentally related to sustainably because every decision pertaining to what to buy, what quantity the buy, how many to consume, or how to dispose of things has a direct influence on the natural world and the generations to come, and the overall impact of every single the customer's purchase is disastrous. A framework-based systematic literature review (SLR) was conducted to better comprehend the body of research on digital innovation and sustainability driving consumer behavior. This was done in order to acquire a deeper understanding of the studies that have already been done in this area. to provide (i) a comprehensive review of the current research landscape and (ii) a rich roadmap for future research. This study evaluated the literature especially in terms of theory, context, traits, and methodology. A total of 107 research articles published between 2013 and 2022 were found using scientific methods in the Scopus database. The findings showed that most research appears to have employed qualitative methodologies and was grounded in the setting of China and Italy. This review could help scholars better grasp the relationship between digital innovation and sustainability, opening the door for additional study and advancement in the field. Additionally, by extending the literature study and emphasizing the elements that can improve digital innovation and sustainability, practitioners will be given a better overall understanding of how to approach the problem.

In recent years, weeds is responsible for most of the agricultural yield losses. To deal with this threat, farmers resort to spraying pesticides throughout the field. Such method not only requires huge quantities of herbicides but impact environment and humans health. One way to reduce the cost and environmental impact is to allocate the right doses of herbicide at the right place and at the right time (Precision Agriculture). Nowadays, Unmanned Aerial Vehicle (UAV) is becoming an interesting acquisition system for weeds localization and management due to its ability to obtain the images of the entire agricultural field with a very high spatial resolution and at low cost. Despite the important advances in UAV acquisition systems, automatic weeds detection remains a challenging problem because of its strong similarity with the crops. Recently Deep Learning approach has shown impressive results in different complex classification problem. However, this approach needs a certain amount of training data but, creating large agricultural datasets with pixel-level annotations by expert is an extremely time consuming task. In this paper, we propose a novel fully automatic learning method using Convolutional Neuronal Networks (CNNs) with unsupervised training dataset collection for weeds detection from UAV images. The proposed method consists in three main phases. First we automatically detect the crop lines and using them to identify the interline weeds. In the second phase, interline weeds are used to constitute the training dataset. Finally, we performed CNNs on this dataset to build a model able to detect the crop and weeds in the images. The results obtained are comparable to the traditional supervised training data labeling. The accuracy gaps are 1.5% in the spinach field and 6% in the bean field.

With the increase of the Artificial Neural Network (ANN), machine learning has taken a forceful twist in recent times. One of the most spectacular kinds of ANN design is the Convolutional Neural Network (CNN). The Convolutional Neural Network (CNN) is a technology that mixes artificial neural networks and up to date deep learning strategies. In deep learning, Convolutional Neural Network is at the center of spectacular advances. This artificial neural network has been applied to several image recognition tasks for decades and attracted the eye of the researchers of the many countries in recent years as the CNN has shown promising performances in several computer vision and machine learning tasks. This paper describes the underlying architecture and various applications of Convolutional Neural Network.

Purpose: To compare the efficacy and safety of graft-free short tunnel small flap (STSF) technique with that of scleral patch graft (SPG) in Ahmed glaucoma valve (AGV) implantation. Design: Randomized clinical trial. Participants: Eighty-eyes of eighty patients with medically uncontrolled glaucoma including 41 in STSF and 39 eyes in SPG. Methods: Patients were enrolled and assigned randomly to STSF or SPG. Main Outcome Measures: tube exposure, Intraocular pressure (IOP), number of glaucoma medications, best corrected visual acuity (BCVA), surgical complications, and success rate ( defined as intraocular pressure (IOP) >5 mmHg, ≤21 mmHg, and IOP reduction ≥20% from baseline at two consecutive visits after three months, no reoperation for glaucoma). Results: only one case in SPG developed tube exposure at 1-year follow-up. The cumulative probability of success during the first year of follow-up was 70% in the STSF and 65% in SPG (P = 0.36). IOP decreased significantly from 29.6 ± 8.6 mmHg at baseline to 16.4 ± 3.6 mmHg at the final follow-up in STSF (p = 0.001). The corresponding numbers for SPG were 30.9 ± 11.2 and 15.8 ± 4.7, respectively (p = 0.001). The final IOP was comparable between both groups (p = 0.65). Mean ± standard deviation of the number of glaucoma medications was 1.8 ± 0.9 in STSF and 1.6 ± 0.9 in SPG at final follow-up (P = 0.32). Postoperative complications developed in 8 patients (19%) in STSF and 9 patients (23%) in SPG (P = 0.81). Conclusions: STSF and SPG techniques had comparable complication rate at one-year follow-up. Both techniques were comparable in terms of success rate, postoperative IOP, and glaucoma medications.

COVID-19 has substantially influenced healthcare systems, requiring early prognosis for innovative therapies and optimal results, especially in individuals with comorbidities. Healthcare practitioners have used AI systems for investigating, anticipating, and predicting diseases, through means including medication development, clinical trial analysis, and pandemic forecasting. This study proposes the use of AI to predict disease severity in terms of hospital mortality among COVID-19 patients. Methodology: A cross-sectional study was conducted the approval from the Research Ethics Committee of King Abdulaziz University (KAU), Saudi Arabia. The study used sequential sampling approaches to include 50 Real-Time Polymerase Chain Reaction (RT-PCR) positive COVID-19 patients from KAU's coronavirus isolation wards. A pre-designed form was used to collect each patient's demographic information, including age and gender, signs and symptoms, illness severity (mild, moderate, severe), and laboratory findings. Furthermore, the length of the hospital stay and the result, whether the patient recovered or died, were reported. Results: The study involved 50 patients with varying degrees of disease severity, most of whom suffered from fever, fatigue, cough, sore throat, and diarrhoea. Laboratory analysis of COVID-19 patients showed increased white blood cell and platelet counts, with C-reactive protein levels above normal. Elevated LDH levels indicated possible tissue damage, while ferritin levels were elevated. Other enzymes were in the normal range, but bilirubin levels were slightly elevated. Overall, the patient's lab results indicated inflammation and possible blood clot formation. The study evaluated the predictive accuracy for outcomes and mortality of COVID-19 patients based on factors such as CRP, LDH, Ferritin, ALP, Bilirubin, D-dimers, and hospital stay (p-value ≤0.05). The predictive accuracy mortality of patients with COVID-19 using AI showed Hospital stay, D-Dimers ALP, Bilirubin, LDH, CRP, and Ferritin significantly affected hospital mortality. (p ≤ 0.0001). Conclusion: Artificial Intelligence is crucial for identifying early coronavirus infections and monitoring patient conditions. It improves treatment consistency and decision-making via the development of algorithms. AI can track the crisis at various scales, facilitate research, and aid in developing treatment regimens, prevention strategies, and drugs and vaccines. It also aids in monitoring health and facilitating research on the virus.

Establishment of protected areas (PAs) is one of the key global conservation strategies that currently cover approximately 15% of the earth’s land surface. Globally, PA networks are designed to curb the growing anthropogenic pressures in areas with high biological diversity. Despite the importance of PAs in conserving the vanishing biodiversity and unique habitats, many of them are in critical condition due to poor governance thus functioning below the expected level. Moreover, in many developing countries, the PA coverage is below the global standard. Recognizing their contemporary role in conservation, governments have recently agreed to expand the global PA coverage to 17% by the year 2020 (Aichi target 11). This book with eight chapters from different regions of the world provides an overview of the PAs governance, institutional mechanisms, conservation benefits, limitations and challenges associated with their respective policy discourse, integrated management, and functional attributes. Protected areas expect to to play an important role in the long rn in conservation and protection of biodiversity and ecosystems particularly in countries where population pressure and habitat loss are high. Regular intervention, political commitment, and effective governance are essential for the sustainability of PAs across the world. Here, we also attempted to shed some light on future development clues for the sustainable management and monitoring of PAs worldwide.

This study delves into the intricate interplay of economic growth components, specifically focusing on Consumption and investment in Saudi Arabia from 2000 to 2022. Employing vector error correction models and cointegration techniques, we analyze the short- and long-term dynamics within the relationship of Consumption, investment, and economic growth. Granger causality analysis is also used to discern these pivotal variables' causal connections. Our empirical analysis reveals a persistent long-term cointegration relationship among the variables, underscoring the enduring nature of their interdependency. Furthermore, our findings highlight Consumption and investment's statistically significant positive impact on economic growth. Notably, the short-term analysis unveils a stable model characterized by an annual adjustment to equilibrium of 100%.Moreover, the Granger causality study demonstrates unidirectional causal linkages between Consumption, investment, and economic growth. These findings hold substantial implications for policy formulation in Saudi Arabia. Policymakers must grasp the ramifications of burgeoning prosperity and evolving private consumption patterns on future environmental outcomes. Achieving sustainable long-term results necessitates equal emphasis on bolstering private Consumption and fostering other facets of economic growth.

This study examines the effect of a hyaluronic acid (HyAc) containing tricalcium phosphate putty scaffold material (TCP-P) and of a particulate tricalcium phosphate (TCP-G) graft on bone formation, volume stability and osteogenic marker expression in biopsies sampled 6 months after bilateral sinus floor augmentation (SFA) in 7 patients applying a split-mouth design. Biopsies were processed for immunohistochemical analysis of resin embedded sections. Sections were stained for collagen type I (Col I), alkaline phosphatase (ALP), osteocalcin (OC) and bone sialoprotein (BSP). Furthermore, the bone area and particle area fraction were determined histomorphometrically. Cone-beam CT data recorded after SFA and 6 month later were used for calculating the graft volume at these two time points. TCP-P displayed more advantageous surgical handling properties and a significantly greater bone area fraction and smaller particle area fraction. This was accompanied by significantly greater expression of Col I and BSP and in osteoblasts and osteoid and a less pronounced reduction in grafting volume with TCP-P. SFA using both types of materials resulted in formation of sufficient bone volume for facilitating stable dental implant placement with all dental implants having been in function without any complications for 6 years. Since TCP-P displayed superior surgical handling properties and greater bone formation than TCP-G, without the Hyac hydrogel matrix having any adverse effect on bone formation or graft volume stability, TCP-P can be regarded as excellent grafting material for SFA in a clinical setting.

The detection of SARS-Cov-2 in the sewage and water resources has increased the awareness among the people about the possibility survival of SARS-Cov-2 in the environment and the potential to transmit into the human through food chain or water resources. Moreover, the surface contaminated by the virus need to be disinfected frequently by using an effective disinfectant, the current chapter discussed the efficiency of the most traditional treatment process of the sewage and wastewater, and their role in the elimination of the virus as well as the sterility assurance level concept. Moreover, the chemical disinfectant used currently and their temporary efficiency has been reviewed.

One of the main families of antimicrobial peptides (AMPs) derived from the skin secretions of Hylidae frogs are dermaseptins. Among them, dermaseptin S4 (DS4) is characterized by its broad spectrum of activity against bacteria, protozoa and fungi. This study determined the physicochemical properties of the native peptide DS4(1-28) and its derivatives [DS4(1-28)a and DS4(1-26)a] isolated from the skin of the frog Phyllomedusa sauvagii and examined their antimicrobial properties against two marine pathogenic bacteria (Vibrio harveyi and V. anguillarum). The results indicate that DS4(1-26)a has high bacteriicdal activity against the tested strains and low hemolytic activity (&gt; 30 % lysis at the highest tested concentration of 100 µg mL-1) compared to the other two peptides. In addition, all three peptides affected the membrane and cell wall integrity of both pathogenic bacteria, causing leakage of cellular contents, with DS4(1-26)a having the most severe impact. These properties were corroborated by tansmission electron microscopy and by the variation of cations in their binding sites due to the effect of AMPs. These results suggest that DS4 and its derivatives, particularly the truncated and amidated peptide DS4(1-26)a, could potentially be effective in the treatment of infections caused by these marine pathogenic bacteria. Future experiments are required to validate the use of DS4 in vivo in the prevention of fish bacterial diseases.

Traditional metals such as stainless steel, titanium and cobalt chrome are used in biomedical applications (implants, scaffolds etc.) but suffer from issues such as osseointegration and compatibility with existing bone. One way to improve traditional biomaterials is to incorporate ceramics with these metals so that their mechanical properties can be similar to cortical bones. Tricalcium phosphate is such a ceramic with properties so that it can be used in human body. This research explores the use of binder jetting based additive manufacturing process to create a novel biocomposite made of cobalt chrome and tricalcium phosphate. Experiments were conducted and processing parameters were varied to study their effect on the printing of this biocomposite. Layer thickness, binder saturation and drying time affected the dimensional tolerance and the density of the green samples. This effect is important to understand so that the material can be optimized for use in specific applications.

Peste des Petits Ruminants (PPR) is one of the major transboundary animal diseases that severely impact livestock production and trade worldwide. An investigation was carried into the seroprevalence and risk factors of PPR in small ruminants, camels, and wild ruminants in Bahrain. A total of 1240 serum samples were collected from 119 sheep flocks and 1224 serum samples from 125 goat herds. In addition, 100 sera from camels and 38 sera from wild ruminants, were collected. Serum samples were tested for the presence of PPR specific antibodies using a competitive ELISA. Flock management and health information of the flocks and herds were collected using a semi-structured questionnaire. The individual prevalence of PPR in sheep and goats was 26% and 25.5%, respectively. The flock or herd level prevalence of PPR was 22.7% and 29.6% in sheep and goats, respectively. None of the tested camels or wild ruminants were positive for PPR-specific antibodies. Sheep and goats from the Northern governorate were more likely to be seropositive to PPR than in other governorates. On the individual animal level, the univariate analysis suggested; age (&lt;12 months), sex (male), and health status (weak animals) as risk factors for PPR seropositivity. On the flock/herd level, the multivariable logistic regression analysis identified large flock/herd size and semi-intensive farming as risk factors for PPR seropositivity.

Saudi Arabia is an oil-reliant nation as a large percentage of its GDP comes from oil resources. Oil dependency leaves a county at the mercy of the international crude market, and a decrease in the price of crude can seriously destabilize the economy of such nations. An example is the case of Venezuela whose dependence on oil caused a national disaster (McCarthy, 2017). As such, the nation’s exports, GDP, and government revenue are primarily dependent on oil revenue, and the recent decrease in the oil prices has decreased Venezuela’s national revenue resulting in economic collapse as well as inflation. A shift from a resource based economy to a knowledge based economy will help Saudi Arabia become less reliant on its oil revenues for its economic stability and growth (Nurunnabi, 2017).

Two experiments were conducted to develop a Nano green manganese and assess its effect on grapevines. The first experiment was microbiological, where several incorporation strategies were utilized to enrich the yeast with manganese, as follows: (1) adding manganese to the liquid medium (growth phase), (2) adding after 24 h of incubation (non-growth phase). As the results, growth phase reduced the possibility of medium contamination. Manganese concentration in the yeast cells was increased as that of manganese sulphate in the medium. Manganese incorporation in yeast cells was 99.93% higher than that of the medium at 0.0195 g/l of manganese. Although the concentration of manganese in the medium raised the OD of yeast cell biomass, manganese sulphate had no passive influence on it. The second experiment was horticultural, done on Flame Seedless grapevines, since both active fresh and frozen yeast enriched with manganese resulted from the first experiment were sprayed twice a year at 10 or 20 cm3/l comparing with manganese sulphate, and manganese chelate. The results demonstrated that yeast extracts in both forms increased the yield and improved fruit properties. The most effective treatment on vegetative growth, yield and fruit properties was the frozen yeast enriched with manganese at 20 cm3/l.

In this study, the olive pomace was considered because of its importance in the environment. So, this study carried out to estimate the total nitrogen content and the fatty acids profile of olive pomace. The olive pomace samples were collected from Irbid, Jarash, Ajloun and Mafraq during the harvesting season 2014 to study the biochemical characteristics of fatty acid composition and the total nitrogen (TN) content. The total nitrogen content was determined by standard Kjeldahl method and the fatty acid profile was detected by gas chromatography (GC). The results show that the total nitrogen content ranged from (0.39 ± 0.0) to (0.62 ± 0.02) with statistically significant difference suggesting that the composition of matrices and their percentage may be responsible for composition of amendments. The calculated total protein percentage ranged between (2.43 ± 0.00) to (3.87 ± 0.17). Also, 13 different fatty acids were quantitatively profiled and quantitated. Oleic acid (C 18:1) was found to be the highest percentage of all other fatty acids and ranged between (59.03%) and (63.81%), moreover the C 18:1/C 18:2 (oil quality) was calculated and C.V% showed variation meaning that nutritional implication could affect the oxidative stability of oils. In conclusion, OP by-product could give a sustainable and alternative-cheap source for fertilizers, pharmaceutical industries, cosmetics and other industries.

From the hospital wastewater, a novel bacteriophage was isolated and characterized. According to characterization properties, this bacteriophage belongs to the Siphoviridae family, the maximum bacteriophage titer was recorded at 37°C and a pH of 7.2, had a 44,789 bp linear double-strand DNA genome, and within the genome sequence, there are 61 genes, all of which are encoded into proteins. Although this bacteriophage does not have any virulence factors or antimicrobial resistance genes and had specific lytic activity against some antimicrobial resistance S. aureus clinical isolates.

The emergence of novel coronavirus (SARS-CoV-2) in marked as the highest pathogenic coronavirus that has crossed from the hosts to the human population in the twenty-first century. The spreading of COVID-19 in different chinese cities and around the world is travel-related viral spread with the unprecedented nosocomial outbreaks. It has also shown with high case-fatality rates, indeed to urgent prophylactic and therapeutic settings. Scientific advancements of the SARS-CoV-2 pandemic allowed for rapid progress to understand the epidemiology and pathogenesis of SARS-CoV-2. This review highlights the the genomic structure of SARS-CoV-2 with the proposed roles of genotype and phenotype of SARS-CoV-2 in pathogenesis and discuss recent results supporting treatment strategies of COVID-19 with a special focus on how these new insights may facilitate rational development of SARS-CoV-2 for targeted therapies in the future.

This paper presents a concise mathematical framework for investigating both feed-forward and backward process, during the training to learn model weights, of an artificial neural network (ANN). Inspired from the idea of the two-step rule for backpropagation, we define a notion of F_adjoint which is aimed at a better description of the backpropagation algorithm. In particular, by introducing the notions of F-propagation and F-adjoint through a deep neural network architecture, the backpropagation associated to a cost/loss function is proven to be completely characterized by the F-adjoint of the corresponding F-propagation relatively to the partial derivative, with respect to the inputs, of the cost function.

Micellar Casein Concentrate (MCC) is manufactured from microfiltration (MF) of skim milk utilizing ceramic or polymeric membrane filtration. While ceramic filtration has higher efficiency, use of polymeric is cost effective and the process is familiar to several US dairy processors. The aim of the present study was to develop an optimized membrane filtration process to produce MCC using spiral wound polymeric membrane filtration (SW MF) system by systematic selection of transmembrane pressure (TMP) and level of diafiltration (DF). Using skim milk as feed material, preliminary lab-scale MF experiments were conducted using 0.5 µm polyvinylidene fluoride (PVDF) membrane. Three TMP (34.5, 62.1, and 103.4 kPa) and three levels of DF (70, 100, and 150%) along with a process without DF as control were used in the study. Effect of TMP and effectiveness of DF on flux rates, SP removal, casein to total protein (CN/TKN) ratio, casein to true protein (CN/TP) ratio, rejection of casein (rej CN) and SP (rej SP) were evaluated. At all TMP values used in the study, the overall flux (O Flux) increased with the level of DF. Highest O Flux of 30.77 liter per meter square per hour (LMH) was obtained with 34.5 kPa pressure and 150% DF. The impact of DF was more pronounced at lower pressures than at the higher pressures used in the study. With controlled DF, instantaneous flux was maintained within 80% of initial flux for the entire process run. For all the experiments, casein has a rejection of 0.97 to 1.0, while serum protein has the lowest rejection of 0.10 at 34.5 kPa pressure and 150% DF level. Use of 34.5 kPa and DF level of 150 % contributed to 81.45% SP removal, and casein to true protein ratio of 0.96. SP removal data from the lab-scale experiments were fitted into a mathematical model using DF and square of TMP as factors. The model predicts SP removal within 90-95% of actual SP removal got from the pilot plant experiments.

This paper examines how housing prices are determined by macroeconomic factors in Saudi Arabia, namely, Gross Domestic Product Per capita (GDPP), Consumer Prices Index (CPI), and Unemployment Rate (UNEMP). Quarterly data for a period (2014q1 – 2019q4) were collected from publications of Saudi Arabian Monetary Authority (SAMA). Vector Autoregression Analysis (VAR) is employed to capture the dynamic effect of the variables on housing prices. Granger Causality, Variance Decomposition and Impulse response function are also used. The results show that housing prices are insignificantly and positively related to GDPP, whereas it is negatively related to both (CPI & UNEMP). Only CPI has a significant relationship. The three variables, jointly, have Granger causality on HPI. Variance decompositions show that CPI is the variable with the highest explanatory power over the variation of housing prices, followed by GDPP and the UNEMP respectively indicating that CPI is the most influential determinants for housing prices.

The paper draws attention and opens the debate on major societal issues that concern not only Muslims but human societies, at large, because of their profound implications, afflictions, and their present and future transitive dimensions. The paper discusses two major issues that have attracted a great deal of attention in the recent past: wealth and income disparities, and global indebtedness. Four remedies have stressed upon and/or proposed to eradicate and/or lessen some of the burdens of these problems have been thoroughly examined. These are: - Stripping commercial banks of their power to create money out of thin air (i.e., Ex Nihilo). Thus, reviving financial reform in line with the spirit of the call for the “Establishment of a National Bank [in England]” in the 1820s by the renowned British economist David Ricardo (1772-1823). The Bank of England was a private commercial entity at that time. - Prohibiting of ‘harmful’ speculation activities in financial and economic transactions and/or imposing hefty taxes on transactions relating to such activities. The implementation of such a policy requires and clear-cut distinction between the ‘harmful’ and ‘non-harmful’ speculative activities in financial and non-financial markets. - Levying adequate and fair taxes on the wealthiest upper class at the global scene. Calls for such a policy is on rise in the past few years. For instance, “Speakers at the European Development Days summit in Brussels, [in 2017], said that a just tax system should be “at the heart” of the development debate, and that more transparency is needed to ensure that companies pay their fair share. Tax avoidance schemes used by multinational companies, such as moving profits to tax havens, result in global losses of around $650 billion a year in tax receipts — with developing countries losing $200 billion, according to a study from the International Monetary Fund”, (Edwards, 2017; Crivello et al., 2015, p. 21) - Establishing a neutral legislative and tax regimes for different modes of financing. Thus, providing ‘a level playing field’ for equity and debt modes of financing due to the current biasness of the tax regimes to debt-based financing instruments as it has been documented in various studies carried out by the IMF, the European Commission, and other international prominent bodies.

Battery electric vehicles provide an opportunity to balance supply and demand in future power systems with high shares of fluctuating renewable energy. Compared to other storage systems such as pumped-storage hydroelectricity, electric vehicle energy demand is highly dependent on charging and connection choices of vehicle users. We present a model framework of a utility-based stock and flow model, a utility-based microsimulation of charging decisions, and an energy system model including respective interfaces to assess how the representation of battery electric vehicle charging affects energy system optimization results. We then apply the framework to a scenario study for controlled charging of nine million electric vehicles in Germany in 2030. Assuming a respective fleet power demand of 27 TWh, we analyze the difference between power-system-based and vehicle user-based charging decisions in two respective scenarios. Our results show that taking into account vehicle users’ charging and connection decisions significantly decreases the load shifting potential of controlled charging. The analysis of marginal values of equations and variables of the optimization problem yields valuable insights on the importance of specific constraints and optimization variables. In particular, state-of-charge assumptions and representing fast charging drive curtailment of renewable energy feed-in and required gas power plant flexibility. A detailed representation of fleet charge connection is less important. Peak load can be significantly reduced by 5% and 3% in both scenarios, respectively. Shifted load is very robust across sensitivity analyses while other model results such as curtailment are more sensitive to factors such as underlying data years. Analyzing the importance of increased BEV fleet battery availability for power systems with different weather and electricity demand characteristics should be further scrutinized.

Face milling is a well known commercial process highly used in heavy industries that consumes high amount of power. Besides power issue, modern manufacturing industries are aiming for per part cost reduction keeping the product quality unimpaired. Unexpectedly if the part is rejected in any stage of manufacturing, the cost of manufacturing dramatically increases. Major cause of part rejection is excessive tool wear that imparts poor surface profile or catastrophic tool failure that causes adherence of broken tool debris onto machined surface. Furthermore, the tool wear is associated with sliding distance (frictional distance) and the tool life quantifies the cost of tools. As such, from the perspective of manufacturing industries it is imperative to optimize the surface quality parameter, cost of part, power consumption, and material removal – this is exactly what is accomplished here. By this work, it is possible to conserve power consumption, produce parts with lower cost, manufacture with uncompromising surface quality and enhanced material removal rate. Moreover, as intermediate factors of interest, the influences of sliding distance, tool life and tool flank wear on the overall machining performance are evaluated. The multi-objective optimization by Grey Relational Analysis (GRA) revealed that for improved product performance and fast manufacturing (case 1) optimum results are: feed per tooth fz = 0.25 mm/tooth, cutting speed vc = 392.6 m/min and cutting length l = 0.5 mm; for resource conservation (case 2) the optimum results are: feed per tooth fz = 0.125 mm/tooth, cutting speed vc = 392.6 m/min, cutting length l = 0.5 mm.

Mesentery was discovered as a new organ in 2017. It is a continuous membranous tissue from the duodenojejunal flexure to the anorectal junction. It has distinct anatomy, physiology, and disease states. Primary mesenteropathies include vascular and non-vascular diseases. Some of them are common, and some of them are rarely seen in clinical practice. Secondary mesenteropathies occur when infection or malignancy in another organ spreads to the mesentery. Each entity has specific diagnostic and treatment protocols.

Cervical cancer is one of the ailments that endangers the health of women all over the world and causes infertility. Fortunately, this disease can be avoided. Both the results and participation rates of the current preventative strategy remain poor. Hence, preventative or early detection methods remain challenging and open. In gynecology and computer science fields, few studies on identifying cervical cancer are based on behavior risk factor and machine learning. Moreover, various social and behavioral aspects might often make it more difficult to detect cervical cancer especially in low‑ and middle‑income countries (LMICs). Accordingly, focus on predicting the presence of cervical cancer through behavioral risk factors is the basic structure of this research. We proposed an approach to classify cervical cancer from a social-behavioral perspective using logistic regression to predict cervical cancer. We got significantly improved outcomes than the existing methods. Moreover, we used feature engineering to formulate less dimensionality as a pre-processing step and optimized parameters to be prepared for classification phase. The results proved that using the logistic regression with regularization type L1 had a promising performance. The accuracy of Logistic Regression (LR) L1 was 97.2%. Such results support the proposed work as a reliable classification predictive tool.

The wetlands in northeastern Bangladesh are home to some of the most prolific and valuable ecosystems on the planet, offering a wide range of benefits to both the local and wider communities. A limited number of research on this topic have been carried out in various wetlands in coastal hilsa, but none have been located in the northeastern region of Bangladesh. Thus, the goal of this study was to better understand the most commercially relevant species (anadromous hilsa) in northeastern Bangladesh as well as to assess the wetland ecosystem services more thoroughly with the contribution of their fish genetic resources. In addition to laboratory studies, fieldwork was done in the fishing settlements along the Surma River, Hakaluki Haor, and Tanguar Haor. The study classified 77 fish species into 21 subcategories of ecosystem services, of which 56% were not threatened, 17% were vulnerable, and 10% were highly endangered. The species Hilsa was found to be the most economically significant, accounting for 1% of the GDP overall. The study determined if the hilsa stock of the examined wetlands maintains a single or several subpopulations in comparison to other parts of the country when they migrate from saline water to northeastern Bangladesh (freshwater). But when compared to other groups, the FST score was between 0.000 to 0.017, indicating that the populations are identical and that there is genetic material sharing between them. Additionally, these statistics imply that the Sylhet haor and adjacent river systems contain a single stock of Hilsa fish. Nevertheless, a number of stresses and risks, including overexploitation, illicit and destructive fishing, siltation, and natural disasters like flash floods, have been linked to changes in the supply of hilsa and other ecosystem services. This study also emphasizes the necessity of policy attention and research to address the concerns.

In this paper, we investigate the behaviour of a relativistic quantum oscillator under the effects of Lorentz symmetry violation determined by a tensor (KF)µναβ out of the Standard Model Extension. We analyze the quantum system under a Coulomb-type radial electric field and a uniform magnetic induced by Lorentz symmetry breaking effects under a Cornell-type potential, and obtain the bound states solution by solving the Klein-Gordon oscillator. We see a quantum effect due to the dependence of the angular frequency of the oscillator on the quantum numbers of the system, and the energy eigenvalues and the wave-function of the oscillator field get modified by the Lorentz symmetry breaking parameters as well as due to the presence of Cornell-type potential.

Integrated photovoltaic-fuel cell (IPVFC) systems, amongst other integrated energy generation methodologies are renewable and clean energy technologies that have received diverse research and development attentions over the last few decades due to their potential applications in a hydrogen economy. This article systematically updates the state-of-the-art of IPVFC systems and provides critical insights into the research and development gaps needed to be filled/addressed to advance these systems towards full commercialisation. The design methodologies, renewable energy-based microgrid and off-grid applications, energy management strategies, optimisations and the prospects as self-sustaining power source were covered. IPVFC systems could play an important role in the upcoming hydrogen economy since they depend on solar hydrogen which has almost zero emissions during operation. Highlighted herein are the progresses as well as the technical challenges requiring research efforts to solve to realise numerous potential applications of IPVFC systems such as in unmanned aerial vehicles, hybrid electric vehicles, agricultural applications, telecommunications, desalination, synthesis of ammonia, boats, buildings, and distributed microgrid applications.

The general objective of the study is to analyze food insecurity determinants mainly related to food price at macro level. The study used a time series data from the year 1988 quarter one to 2018 quarter four. Our empirical finding on the macroeconomic model show the short term consequence of food price change is positive with food security (negative with food insecurity). The long term consequence of food price change is, however, negative with food security (positive with food insecurity) at macro level. From the variance decomposition, it can be learned that the speed by which the undernourished people decrease in number in the short term because of the inflation happened is higher than the speed by which the number of undernourished people increase in the long run. At macro level, concern should be made to the supply side for food security improvement.

In this paper, a relativistic scalar particle under Lorentz symmetry breaking effects in the presence of a scalar potential is investigated. We introduce the scalar potential by modifying the mass via transformation M → M+S(r) in the wave equation and analyze the behaviour of a scalar particle. We see that the analytical solution to the KleinGordon equation can be achieved, and the energy eigenvalues and the wave function depends on the Lorentz symmetry breaking parameters as well as potential

Background and Objectives: In Libya, prescription medicines can easily be dispensed without a prescription, as self-medication with the subsequent of potential misuse and unnecessary risk for patients. This systematic review and meta-analysis explored the prevalence of self-medication among citizens in Libya. Methods: We systematically searched PubMed, ISI Web of Knowledge, EMBASE, Medline, Scopus, google scholar and ResearchGate databases for studies published in Libya reporting the prevalence of non-prescription use of medicines in community pharmacies, targeting studies published from Jan 2008 until Dec 2019. A random meta-analysis was performed to analyze pooled estimates of non-prescription usage of medicines. Results: Out of 63 articles identified, a total of 13 papers from 7 cities were met the inclusion criteria and involved a total of 4741 subjects. The overall pooled proportion of self-medication of drugs was 53.6% (95% CI: 0.93% - 1.08%), with low heterogeneity and the P-value of the whole population tasted was found to be = 1.000 (df = 12). Seven out of the 13 studies reported data on self-medication for antibiotics without prescription. The records ranged from 15.3% (95% CI 0.61–1.65) in Misurata to 76.6% (95% CI 0.80–1.25) in Tripoli. Conclusion: Self-medication use of medicines among Libyan population is a common phenomenon involving a high proportion use of antibiotics. This misuse of medications could enhance the development and spread of antibiotic resistance.

Systematics plays the most crucial role in biodiversity conservation which is at stake due to anthropogenic activities and environmental degradations. The ever-increasing decline of classical taxonomic expertise drives the need to develop molecular marker-based tools for quick, efficient, and reliable detection of organisms, to assess their ecological impacts for deepening our understanding of systematic and evolutionary relationships between organisms which is central to biology. The pace of alpha taxonomy has quickened by its integration with an increasingly fashionable and novel concept called DNA barcoding which utilizes a short genetic marker or barcode to categorize species for enhanced biodiversity assessment. As a supplementary but not complete alternative of systematics research, DNA barcoding, however, not error-free, brings precision in identification by solving existing problems of classical taxonomy and phylogenetics, irrespective of the growth stage of organisms, particularly for known taxa rather than unknown ones. Mitochondrial gene Cytochrome C Oxidase 1 (COI) serves as a universal animal barcode but there is no such universal barcode for plants and developing a suitable one is more challenging. With the recent advancement of Next Generation Sequencing (NGS), DNA metabarcoding technology is advancing rapidly. Still, ambiguity and error prevail with the correct identification of species due to some problems. After extensive analysis of the existing DNA barcoding papers, this review discusses commonly used DNA barcodes in plants and animals, their roles, advantages, limitations to solve existing problems of conservation biology and add the author’s views and recommendations.

Magneto-rheological dampers (MR-dampers) are increasingly used in construction applications to reduce the dynamic response of structures to seismic activities or severe wind loading. Sensors attached to the structure will signal the computer to supply the dampers with electric charge that transfers the MR fluid to a near-solid material with different physical and mechanical properties (viscoelastic behavior). Control algorithms govern the fluid to near-solid conversion, which controls the behavior of the damper, and the performance of the structure under the seismic or wind loading event. The successful optimization of control parameters minimize the overall structural response to dynamic forces. The main objective of this research is to change the output behavior of specific floors within a building subjected to seismic excitation by optimizing the MR-dampers control parameters to impact the behavior of a specific floor or number of floors within the building. The adjustment of control parameters to attain this objective was validated in multiple case studies throughout this research. The successful implementation of the research outcome will result in optimized MR-damper design to meet the performance-based criteria of building projects.

Inertial navigation system (INS) is a basic component for obtaining a continuous navigation solution in various applications. The INS navigation solution suffers from a growing error over time. In particular, its navigation solution depends mainly on the quality and grade of the inertial measuring unit (IMU) that provides the INS with both accelerations and angular rates. However, low-cost small micro-electro-mechanical systems (MEMS) suffer from tremendous error sources such as bias, scale factor, scale factor instability, and highly non-linear noise. Therefore, MEMS-IMU measurements lead to drifted solutions when used as a control input to the INS. Accordingly, several approaches have been introduced to model and mitigate the errors associated with IMU. In this paper, a machine learning-based adaptive neuro-fuzzy inference system (ML-ANFIS) is proposed to leverage the performance of low-grade IMUs in two phases. The first phase is training 50% of the low-grade IMU measurements with a high-end IMU to generate a suitable error model. The second phase involved testing the developed model on the remaining low-grade IMU measurements. A real road trajectory was conducted to evaluate the performance of the proposed algorithm. The results show the effectiveness of utilizing the proposed ML-ANFIS algorithm in removing errors and improving the INS solution compared to the traditional one. An improvement of 70% in the 2D-positioning and 92% in the 2D-velocity INS solution is attained when the proposed algorithm was applied compared to the traditional INS solution.

This study tries to focusing on applying information communication technology for economic importance of Mid Oil Company (MDOC), which is among contemporary oil companies in Iraq. Since ICT forms a significant aspect of achieving organizational economic objectives, most of public and private bodies seek to utilize ICT tool and techniques to improve work efficiencies. The emerging growth in ICT has made it process and service automation possible in managing organizational activities. To determine this effect of ICT on organizations, this study formulated statistical research model at MDOC through using fifteen questionnaires, which were distributed on three axes. The outcome of the questionnaire analysis revealed that there is inadequate comprehensive infrastructure to suitably support ICT within the selected organization management. In addition, it revealed that there are no ideal standards to maintain and sustain internet networks. Based on these revelations, the study presents recommendation for the adoption of ICT with the aim of minimizing cost, enhancing communication and managing infrastructure. Also recommends the need to support IT department within an organization, with essential equipment, in terms of man and machine, for better efficiency to employ the key of ICT Impact in Iraqi governmental oil companies.

Good governance in natural resource management (NRM) is one of the most challenging issues in developing countries that often inappropriately embedded in national policies and political agendas. It is, in fact, even more important for countries like Bangladesh with exceptionally high pressure and dependence on its natural resources for sustaining rural livelihoods. Globally, nowadays, good governance is considered as one of the key factor for achieving the goal of sustainable development and biodiversity conservation. Bangladesh, of late has responded to that global zeal by involving local communities in the management of country’s declining forest and other natural resources. The colonial legacy of the forestry sector of Bangladesh was planned and, managed as interim projects through donors’ prescriptions. Thus, institutions, management processes and conservation outcomes were problematic. The conventional approach adopted by colonial and post-colonial regimes for forest management also proved to be inefficient due to its top-down management system. The absolute dependency on donor support, and their prescription sometimes worsened the situation both ecologically and socially. Global, regional and local trends supported the need for a different dimension in the governance paradigms. The introduction of a pluralistic approach, known as co-management in protected areas (PAs) is an example of an attempt whereby shared governance mechanism are implemented to attain the desired goals of conservation that will also address the livelihoods and aspirations of communities living in and around PAs of the country. However, in designing future forest and PA regimes the concern of the external aid support and attached conditions remain a reality that needs to be addressed. Adequate attention should be given to our vanishing biodiversity, culture and community livelihoods through devising an appropriate governance mechanism recognizing and supporting local rights, access and participation in the environmental management. It is now time to mainstream the adhoc nature of governance according to our national conservation strategy and policy frameworks in order to achieve the goals and objectives of the Bangladesh NRM sector addressing the human and community right of people in the specific context of forest protected areas management.

We study a localization of gravity through the matching point between non-inertial frames and local inertial frames. This localization of gravity is done through defining relative gravitational red-shift. This lead to an emergence of a timeless state in a mathematically consistent way. In this timeless state of gravity, we find a geometric interpretation of the speed of light and mass. The experimental support of the timeless state is the quantum entanglement and internal symmetries that are independent of time. Therefore gravity would be responsible for measurements independent of time including quantum entanglement. Timeless state in that sense explain why do we have gravity/gauge correspondence. We conjecture that the universe emerged from a black hole with a global $SU(3)\times SU(2)\times U(1)$ symmetry on its event horizon that produces gauge fields Electromagnetism, weak and strong nuclear force through localization of this global symmetry. Through the localization in the gravity field, the timeless measurements such as spin will be correlated with the varying of timeless measurement which is relative gravitational red-shift. We present a gravitational or geometric interpretation of spin-0, spin-1, and spin-1/2 states. We present an interpretation of why do we measure matter rather than anti-matter. We found that the Higgs scalar field is represented by the gravitational red-shift at every point in the space around the black hole. We derive the numerical value of the cosmological constant that agrees with experimental observations.

Perilla frutescens (L.) Britt. (PF) is an annual herbal medicinal, aromatic, functional food and ornamental plant that belongs to the mint family, Lamiaceae. The origin of perilla traces back to East Asian countries (China, Japan, Korea, Taiwan, Vietnam and India), where it has been used as a valuable source of culinary and traditional medicinal uses. Leaves, seeds and stems of P. frutescens are used for various therapeutic applications in folk medicine. In the absence of comprehensive review regarding all aspects of perilla, thus this review aims to present an overview pertaining to the botanical drug, ethnobotany, phytochemistry and biological activity. It was found that the taxonomic classification of perilla species is quite confused, and the number of species is vague. Perilla has traditionally been prescribed to treat depression-related disease, anxiety, asthma, chest stuffiness, vomiting, cough, cold, flus, phlegm, tumour, allergy, intoxication, fever, headache, stuffy nose, constipation, abdominal pain, indigestion, analgesic, anti-abortive agent, and sedative. Until now, 271 natural molecules have been identified in perilla organs including; polyphenols, flavonoids, essential oils, triterpenes, carotenoids, phytosterols, fatty acids, tocopherols and policosanols. In addition to solvent extracts, these individual compounds (rosmarinic acid, perillaldehyde, luteolin, apigenin, tormentic acid, isoegomaketone) have attracted researchers' interest for pharmacological properties. Its bioactivity showed antioxidant, antimicrobial, anti-allergic, antidepressant, anti-inflammatory, anticancer, neuroprotection activity. Although the results are promising in preclinical studies (in vitro and in vivo) as well, clinical studies are insufficient, therefore further study needs to be done to validate its therapeutic effects and to ensure its safety and efficacy.

Many countries are raising questions on the intentions behind Saudi reforms. The low oil prices in 2008-09 were the awakening call for Saudis, and later in 2014, it became the reason to look for the economy that is less dependent on oil. The article studies the initiated social reforms and social impact of foreign cultural activities. It scrutinizes the Saudi social fabric under the social exchange theory and looks for the positive and negative effects of cultural exchanges. The paper also considers the COVID-19 situation in KSA as it has broken the chain of cultural events planned all over the country to promote tourism and improve the image of KSA.

The study of the concentrations and effects of fine particulate matter in urban areas have been of great interest to researchers in recent times. This is due to the acknowledgment of the far-reaching impacts of fine particulate matter on public health. Remote sensing data have been used to monitor the trend of concentrations of particulate matter by deriving aerosol optical depth (AOD) from satellite images. The Center for International Earth Science Information Network (CIESIN) has released the second version of its global PM_2.5 data with improvement in spatial resolution. This paper revisits the study of spatial and temporal variations in particulate matter in Saudi Arabia by exploring the cluster analysis of the new data. Cluster analysis of the PM_2.5 values of Saudi cities is performed by using Anselin local Moran’s I statistic. Also, the analysis is carried out at the regional level by using self-organizing map (SOM). The results show an increasing trend in the concentrations of particulate matter in Saudi Arabia, especially in some selected urban areas. The eastern and south-western parts of the Kingdom have significantly clustering high values. Some of the PM2.5 values have passed the threshold indicated by the World Health Organization (WHO) standard and targets posing health risks to Saudi urban population.

The research is a deep study of the CBOE Volatility Index (VIX), which represent the market sentiments of the S & P 500 Index (SPX) over a period of 33 years. It evaluates how the two indexes perform in the stock market crash and how reliable VIX is in predicting market sentiments. The research distributes the market rally in two forms, and one is a trust rally, when investors are happy to see the market in a stable form, and investors' sentiments are positive towards the stock market. Second is a fear rally, where investors' sentiments are negative, and their outlook is bearish for various reasons. It observes the pattern of rallies, like the longest trust or fear rally, in which year and its duration. The research analyzes data to reach a meaningful conclusion and various inferences that can be drawn from the study of historical data.

The non-inertial effects on spin-0 scalar particle that interacts with scalar potentials of Cornell-type in cylindrical system and Coulomb-type in the magnetic cosmic string space-time using Kaluza-Klein theory is analyzed. We show that the energy eigenvalue and eigenfunction depend on the global parameters characterizing the space-time, and the gravitational analogue of the Aharonov-Bohm effect for bound states is observed.

This paper reports on the optimization of thin-film coating assisted self-sustainable off-grid hybrid power generation systems for cattle farming in rural areas of Bangladesh. Bangladesh is a lower middle-income country with declining rates of poverty among its 160 million people due to persistent economic growth in conjunction with balanced agricultural improvements. Most of the rural households adopt a mixed farming system by cultivating crops and simultaneously rearing livestock. Among the animals raised, cattle are considered as the most valuable asset for the small/medium-scale farmers in terms of their meat and milk production. Currently, along with the major health issue, the COVID-19 pandemic is hindering the world’s economic growth and has thrust millions into unemployment; Bangladesh is also in this loop. However, natural disasters such as COVID-19 pandemic and floods, largely constrain rural smallholder cattle farmers from climbing out of their poverty. In particular, small and medium-scale cattle farmers face many issues that obstruct them from taking advantage of market opportunities and imposing a greater burden on their families and incomes. An appropriate measure can give a way to make those cattle farmers’ businesses both profitable and sustainable. Optimization of thin-film coating assisted self-sustainable off-grid hybrid power generation system for cattle farming is a new and forward-looking approach for sustainable development of the livestock sector. In this study, we design and optimize a thin-film coating assisted hybrid (photovoltaic-battery-generator) power system by using the Hybrid Optimization of Multiple Energy Resources (HOMER, Version 3.14.0) simulation tool. An analysis of the results has suggested that the off-grid hybrid system is more feasible for small and medium-scale cattle farming systems with long-term sustainability to overcome the significant challenges faced by smallholder cattle farmers in Bangladesh.

In this paper, we investigate how Rindler observer measures the universe in the ADM formalism. We compute his measurements in each slice of the space-time in terms of gravitational red-shift which is a property of general covariance. In this way, we found special relativity preferred frames to match with the general relativity Rindler frame in ADM formalism. This may resolve the widely known incompatibility between special relativity and general relativity on how each theory sees the red-shift. We found a geometric interpretation of the speed of light and mass.

This paper deals with the techno-economic study of the hybrid renewable energy system based on energy storage aspect under the form of hydrogen and methane. Indeed, with the intermittency of the renewable energy sources such as photovoltaic and wind energy, several problems of produced energy injection to the power system network can be encountered due to the shortage or the excess of these sources. This situation appeals the use of systems that ensure the stability of network based on the storage of energy surplus into gas using electrolyzer systems, which will be used afterward to cover the eventual shortage. In the present paper, the study of performance of each pathway of methane and hydrogen storage has been performed by the treatment of multiple scenarios via different architecture case studies in an Algerian location. Whereas, the energy produced by the photovoltaic system, the wind energy and the gas micro turbine sources are considered similar in each case. The modeling and simulation of the studied system operation under optimization criteria has been performed in this work, where the main aim is to define the appropriate configuration taking into account the different with low costs of investment, maintenance operation and immediate reactivity with a big storage capacity.

A total of 473 metabolites were identified from 4 sour cherry genotypes using UPLC-TOF-MS. Untargeted metabolomics revealed the dominant chemical groups present in sour cherries. PCA showed that the diversity in sour-cherry metabolites was due to the genotype differences indicating iditol, malic acid, chlorobenzene, 2-mercaptobenzothiazole, and pyroglutamic acid as the predominant contributors. The variable importance in the projection (VIP &gt; 1.0) in partial least-squares–discriminant analysis described 20 biomarker metabolites, representing the cherry metabolome profiles. A heatmap of Pearson’s correlation analysis between the 20 biomarker metabolites and antioxidant activities identified seven antioxidant determinants that displayed the highest correlations with different types of antioxidant activities. This study of correlating metabolomics and antioxidant activities elucidated that the higher nutritional value and biological functions of select sour cherry genotypes can be useful for the development of nutraceutical and functional foods.

MicroRNAs (miRNAs) are a class of small non-coding RNAs, which function as regulators of gene expression and contribute in numerous physiological processes. However, little is known referring to miRNAs function in insect chemosensation. In the current study, nine small RNA libraries were constructed and sequenced from the antennae of nymphs, adult males and females of Apolygus lucorum. In total, 399 miRNAs were identified including 275 known and 124 novel miRNAs. Known miRNAs were classified into 71 families, amongst which, 23 families were insect-specific. Expression profile analysis showed that miR-7-5p_1 was the most abundant miRNAs in the antennae of A. lucorum. Altogether, 69708 target genes related to biogenesis, membrane and binding activities were predicted for 399 miRNAs. Particularly, 15 miRNAs were found to target 16 olfactory genes. These miRNAs could be involved in regulation of olfactory-associated genes ex-pression. Comparing the antennae of nymphs, adult males and females, 94 miRNAs were found to be differentially expressed. The expression levels of some differentially expressed miRNAs measured by qPCR were consistent with sequencing results. This study provides a global miRNAs transcriptome in the antennae of A. lucorum and valuable information for further investigation on miRNA-mRNA interactions, especially the functions of miRNAs in regulating chemosensation.

Nonlinear loads, a crucial component of power systems grids, pose a challenge due to harmonics injection. Our research tackles this issue with a novel approach - a modified green plug / switched filter compensation scheme using fuzzy logic controllers. This innovative scheme, presented in the paper, utilizes dual action pulse width modulation to ensure switching functions from harmonic reduction and capacitive compensation for inrush nonlinear type AC loads.  The scheme's multi-loop regulations and online switching effectively handle dynamic type slow acting inrush, motorized and other rectifier type-nonlinear loads, enhancing power factor, power quality at source and load buses, and reducing total harmonic distortion at key source and sensitive nonlinear load buses. A simulation model in the MATLAB/SIMULINK software environment demonstrates the efficiency of the proposed FACTS technique. The results show that voltage, current, active power, reactive power, power factor regulation, and effective energy utilization are achievable with the designed FACTS-MFCC-SFC. The switched modulated AC green plug filter significantly improves power quality and enhances power factor in the case of inrush and nonlinear loads.

Along with the economic growth, the companies must contribute to social progress and promote environmental sustainability in equal harmony. Sustainable human resource management (SHRM) strategies make it possible to attain the economic, social and environmental goals of a firm. In this regard, a survey method is discussed using the literature review and online questionnaire to identify the main factors/indicators during the SHRM evaluation of manufacturing firms in India. Uncertainty is commonly occurred in the assessment of SHRM factors. As a generalized version of fuzzy sets, single-valued neutrosophic set (SVNS) has been demonstrated as a valuable tool to illustrate the indeterminate, inconsistent and uncertain data of realistic decision-making problems. Considering the idea of SVNSs, this study develops a hybrid multi-criteria group decision-making (MCGDM) approach for assessing the SHRM of manufacturing firms under uncertainty settings. For this purpose, an SVN-alternative ranking order method accounting for two-step normalization (AROMAN) is proposed based on VIFI-score function-based decision experts’ (DEs’) weighting tool and integrated criteria weight-determining model to solve the MCGDM problems with fully unknown DEs and criteria weights. In this regard, we develop new SVN-distance measure to compute the degree of difference between SVNSs. Some examples are presented to demonstrate the efficacy of developed measure over the existing ones. In addition, new criteria weight-determination model is presented with the integration of objective weights through IVIF-distance measure-based model and subjective weights through ranking comparison (RANCOM) tool on SVNSs. The proposed ranking method is applied to an empirical study of SHRM assessment for manufacturing firms in India, which shows its applicability and feasibility. In this study, the evaluation criteria are characterized into social, environmental and economic aspects with DE’s opinions. Comparative and sensitivity analyses are made to show the strength and steadiness of presented approach. This study provides an innovative MCGDM analysis framework, which makes a significant contribution to the SHRM assessment problem under indeterminate, inconsistent and uncertain setting.

Recently perovskite solar cells have been paying attention of researchers. This comes from their high efficiency and stability. In this work, the change of some Optical and Electrical Properties of BaxFe(1-x)TiO4 thin films due to the change of the nanocrystal spacing and size were studied. A simple theoretical model based on the string theory was utilized to explain some of these empirical relations. The empirical results obtained indicated that an increase in the efficiency of the nano solar cell requires the energy gap to be narrow. Decreasing the nanocrystal size and spacing caused the energy gap to become narrower. The energy gap decreases also upon increasing the absorption coefficient and decreasing the transmission. This also requires increasing the conductivity and the magnetic permeability. The increase of the nanocrystal spacing decreases the absorption coefficient, electrical conductivity, and magnetic permeability, while it causes the transmission to increase. All these changes are explained using a simple string model beside Newton's laws. The capability of the string theory to explain this Nano quantum behavior comes from the fact that the string theory, like quantum theory, recognizes both the particle and the wave nature of the Nano system.

Tamarix nilotica (Ehrenb.) Bunge (Tamaricaceae), an indigenous plant to the Middle East region, is well-known as a medicinal plant for treating many human ailments. The current study aimed at exploring the polyphenols profile of T.nilotica alcohol soluble fraction of aqueous extract, assessing its in-vivo antifibrotic activity and the possible underlying mechanism, to unravel the impact of quantitative difference of sulphated polyphenols content on the antifibrotic activity of T.nilotca grown in two different habitats. Polyphenols profiling of T. nilotica extracts was performed using HPLC-HRESI-QTOF-MS-MS. The major polyphenol components included sulphated flavonoids, phenolic acids and free aglycones. The antifibrotic activity was evaluated through carbon tetrachloride-induced liver fibrosis in rats. Biochemical evaluations revealed that both fractions ameliorated the increased levels of hepatic aminotransferases, lipid peroxidation, hydroxyproline, α-smooth muscle actin (α-SMA), tumor necrosis factor-α (TNF-α), cyclooxygenase-2 (COX-2) and nuclear factor kappa B (NF-κB). Moreover, both fractions reduced catalase activity (CAT) and enhanced hepatic glutathione (GSH) content. Histopathological imaging undoubtedly confirmed such results. In conclusion, T. nilotica polyphenols rich fraction exhibited potential antifibrotic activity in rats. Significant alterations in GSH levels were recorded based on sulphated polyphenol metabolites content.

The relativistic quantum dynamics of a spin-0 scalar particle under the effects of the violation of Lorentz symmetry in the presence of a non-electromagnetic potential is analyzed. The central potential induced by the Lorentz symmetry violation is a linear electric and constant magnetic field and, analyze the effects on the eigenvalues and the wave function. We see there is a dependence of the linear charge density on the quantum numbers of the system

Steam boiler has a significant role in the industrial sector. The failure in boiler tubes significantly reduces the availability of the plant. Furthermore, deposits on the inner tube wall contribute to such failure by changing the thermal resistance of the wall, which causes a significant increase in the tube wall's temperature and, consequently, lower allowable stress. The presented thermal-fluid model is developed for the water tube. The model is implemented using ANSYS FLUENT to estimate the wall maximum water tube wall temperature considering the deposits layer and then determine the minimum thickness of the tube wall via ASME standards to assure safe operation. The model is verified via a mesh independence test. The minimum tube thickness is recommended and justified given the thermo-mechanical performance of the water tubes at several operating loads of 50, 75, and 100 %. These loads are implemented by different convective heat transfer coefficients of flue gases under different deposit thicknesses, thermal conductivity, and flue gas temperature. The present work contributes to the literature by recommending the minimum thickness of the water wall tubes and highlighting the thermo-mechanical effect of the deposits on water tube resilience under different operating conditions.

BACKGROUND G6PD deficiency is an inherited an X-linked recessive condition leading to insufficient levels of glucose-6-phosphate dehydrogenase, thus causing hemolytic anaemia under certain conditions. METHODS Our study is explorative for cases admitted to Jordan University Hospital. The studied parameters include demographics, clinical manifestations, biochemical markers including Hb level, WBC count, liver enzymes, and blood grouping. RESULTS Most of the patients were admitted to the emergency unit (53.13%). Individuals who were Rh-positive represented 57.81%, while patients of AB blood group accounted for 75%. The mean values were 4.81 years (age), 29.06 hours (time-to-hospital admission), 38.10 degree Celsius (temperature), 6.11 gm/dl (Hb), 13242.19 (WBC count), 343.20 U/L (S. ALP), and 50.98 IU/L (S. ALT). There was no significant difference between males and females or between favism-induced versus drug-induced hemolytic episodes. AB and Rh positive blood groups are of protective effect in relation to liver enzymes. Patients who were admitted to the hospital within 24 hours from having clinical manifestations had a better prognosis. CONCLUSION This study is the first inferential research on G6PD deficiency from the Middle East to explore cases from one of the largest healthcare centres in Jordan. The role of blood grouping should be investigated prospectively.

This research assess the effects of training program based on the usage of the digital learning objects in teaching practice at the Northern Borders University staff. E Assessment through the tablets and smart phones and the teachers’ attitudes towards such way of evaluation is the major objective of this study as the researcher expects that the assessment mechanism in the university through utilization of tablets and smart phones and its application will inevitably bring in a systematic improvement in the assessment and evaluation process of the curricula. Moreover, making use of the e learning objects in training will make a significant change in e training program of the university. Hence, the researcher has chosen voluntary random samples from the university teaching staff (men\women) from various different faculties (medicine, medical sciences, science, education and arts, business administration, home economics, and science and literature). These samples included 300 members of the teaching staff. In a group of 20 to 25 members, a personal training was conducted regarding the usage of tablets and smart phones and its applications in the assessment process. Each group participated by producing a complete e-assessment for their students in the Northern Borders University and by the e learning system i.e. Blackboard and Question Mark. The research also depends on the semi-experimental design of multiple groups and on testing the groups’ pre and post achievement tests. In addition, the research identifies the level of the university teaching staff in using the tablets and the smartphones and its applications in the assessment process by the note card that the individuals have during the test.