This paper introduces a novel algorithm for solving the point-to-point shortest path problem in a static regular 8-neighbor connectivity (G8) grid. This algorithm can be seen as a generalization of Hadlock algorithm to G8 grids, and is shown to be theoretically equivalent to the relaxed A* (RA*) algorithm in terms of the provided solution's path length, but with substantial time and memory savings, due to a completely different computation strategy, based on defining a set of lookup matrices. Through an experimental study on grid maps of various types and sizes (1290 runs on 43 maps), it is proven to be 2.25 times faster than RA* and 17 times faster than the original A*, in average. Moreover, it is more memory-efficient, since it does not need to store a G score matrix.

In this paper, we address the problem of car detection from aerial images using Convolutional Neural Networks (CNN). This problem presents additional challenges as compared to car (or any object) detection from ground images because features of vehicles from aerial images are more difficult to discern. To investigate this issue, we assess the performance of two state-of-the-art CNN algorithms, namely Faster R-CNN, which is the most popular region-based algorithm, and YOLOv3, which is known to be the fastest detection algorithm. We analyze two datasets with different characteristics to check the impact of various factors, such as UAV’s altitude, camera resolution, and object size. The objective of this work is to conduct a robust comparison between these two cutting-edge algorithms. By using a variety of metrics, we show that none of the two algorithms outperforms the other in all cases.

In this paper, we address the problem of car detection from aerial images using Convolutional Neural Networks (CNN). This problem presents additional challenges as compared to car (or any object) detection from ground images because features of vehicles from aerial images are more difficult to discern. To investigate this issue, we assess the performance of two state-of-the-art CNN algorithms, namely Faster R-CNN, which is the most popular region-based algorithm, and YOLOv3, which is known to be the fastest detection algorithm. We analyze two datasets with different characteristics to check the impact of various factors, such as UAV's altitude, camera resolution, and object size. The objective of this work is to conduct a robust comparison between these two cutting-edge algorithms. By using a variety of metrics, we show that YOLOv3 yields better performance in most configurations, except that it exhibits a lower recall and less confident detections when object sizes and scales in the testing dataset differ largely from those in the training dataset.

Since the release of ChatGPT, numerous studies have highlighted the remarkable performance of ChatGPT, which often rivals or even surpasses human capabilities in various tasks and domains. However, this paper presents a contrasting perspective by demonstrating an instance where human performance excels in typical tasks suited for ChatGPT, specifically in the domain of computer programming. We utilize the IEEExtreme Challenge competition as a benchmark — a prestigious, annual international programming contest encompassing a wide range of problems with different complexities. To conduct a thorough evaluation, we selected and executed a diverse set of 102 challenges, drawn from five distinct IEEExtreme editions, using three major programming languages: Python, Java, and C++. Our empirical analysis provides evidence that contrary to popular belief, human programmers maintain a competitive edge over ChatGPT in certain aspects of problem-solving within the programming context. In fact, we found that the average score obtained by ChatGPT on the set of IEEExtreme programming problems is 3.9 to 5.8 times lower than the average human score, depending on the programming language. This paper elaborates on these findings, offering critical insights into the limitations and potential areas of improvement for AI-based language models like ChatGPT.

The predominance of English and Latin-based large language models (LLMs) has led to a notable deficit in native Arabic LLMs. This discrepancy is accentuated by the prevalent inclusion of English tokens in existing Arabic models, detracting from their efficacy in processing native Arabic's intricate morphology and syntax. Consequently, there is a theoretical and practical imperative for developing LLMs predominantly focused on Arabic linguistic elements. To address this gap, this paper proposes ArabianGPT, a series of transformer-based models within the ArabianLLM suite designed explicitly for Arabic. These models, including ArabianGPT-0.1B and ArabianGPT-0.3B, vary in size and complexity, aligning with the nuanced linguistic characteristics of Arabic. The AraNizer tokenizer, integral to these models, addresses the unique morphological aspects of Arabic script, ensuring more accurate text processing. Empirical results from fine-tuning the models on tasks like sentiment analysis and summarization demonstrate significant improvements. For sentiment analysis, the fine-tuned ArabianGPT-0.1B model achieved a remarkable accuracy of 95%, a substantial increase from the base model's 56%. Similarly, in summarization tasks, fine-tuned models showed enhanced F1 scores, indicating improved precision and recall in generating concise summaries. Comparative analysis of fine-tuned ArabianGPT models against their base versions across various benchmarks reveals nuanced differences in performance, with fine-tuning positively impacting specific tasks like question answering and summarization. These findings underscore the efficacy of fine-tuning in aligning ArabianGPT models more closely with specific NLP tasks, highlighting the potential of tailored transformer architectures in advancing Arabic NLP.

The implementation of systems condition monitoring is of utmost importance in ensuring effective maintenance, optimal efficiency, and adherence to established design criteria. This research presents a novel and economically efficient Digital Twin Model (DTM) designed for the purpose of Live Condition Monitoring (LCM) and Predictive Lifecycles. This study discusses the enhancement of DTs modelling by decreasing the number of dimensions from five to three: Physical, Digital, and Connection entities. The resulting model exhibits a notable improvement in accuracy and efficiency. The suggested Dynamic Time Model (DTM) enhances the empirical pre-set average load for both simulation and experimentation by 35.7%, which is equivalent to a 1.6-fold increase. The DTM demonstrates a significant enhancement in the empirical predefined average lifecycles of the system, as shown in the real-life case study. Specifically, the DTM achieves a 12-fold improvement compared to the simulated results and a nine-fold improvement compared to the experimental findings. The suggested Dynamic Time Management (DTM) demonstrates a significant enhancement in the average lifecycles of the system, with a 19.7% improvement (equivalent to 1.2 times greater) compared to the wireless DTM results obtained through the application of the real system load. The suggested Dynamic Time Warping (DTW) method's accuracy and efficiency are shown via a practical case study using the suspension system of a Peugeot 3008 vehicle.

In recent years, pedestrian re-identification has gained a lot of interest due to its importance for many purposes such as security and safety. Many types of solutions have been proposed to solve this problem, where the majority are based on a features extraction such Convolution Neural Networks (CNNs). These approaches assume that only the identities that are in the training data can be recognized. The pedestrians in the training data are called In distribution (ID). However, in real world scenarios, new pedestrians and objects can appear in the scene and the model should detect them as Out Of Distribution (OOD). In our previous study , we proposed a pedestrian re-identification based on von-Mises Fisher (vMF) distribution. Each identity is embedded in the unit sphere as a compact vMF distribution far from other identities distributions. The embedding is done through a base CNN. Recently, proposed a framework called Virtual Outlier Synthetic (VOS), that detects OOD based on synthesising virtual outlier in the embedding space in an online manner. Their approach assumes that the samples from the same object maps to a compact space. This assumption aligns with the vMF based approach. Therefore, in this paper, we revisited the vMF approach and merged with VOS in order to detect OOD data points. We present our approach to merge both frameworks. We conducted several experiments to evaluate our proposed framework. Results showed that our framework was able to detect new pedestrian that do not exist in the training data in the inference phase. It also slightly helped to improve the re-identification performance.

Air quality and environmental fairness have always been an area of prime interest across the globe. The significance low-cost air quality sensing and practices spikes during the time of pan-demic and epidemics when the air becomes a threat to living beings especially human beings. The gradual innovation and enrichment in low-cost air quality sensing sensors, nodes or devices, and systems are exponentially increasing for the last three decades. This work reviews the major contributions in a) low-cost scalable air quality assessment; b) low-cost air quality sensors, sensing approaches and technologies; c) low-cost state-of-the-art gas sensors fabrication methods (MEMS and CMOS); d) low-cost gas sensors measurement configurations and assemblies; and e) low-cost air quality sensors calibration and testing systems. A systematic review of past work with a goal to assist end-users, public health facilities, state agencies, researchers, scientists and air quality protection agencies has been rendered in this work. Starting from sensors electrodes to IoT based mobile smart nodes; all have been introduced in this article.

White blood cells are crucial for immune defense in the human body, and fluctuations in their levels can lead to severe health issues. This research introduces a system designed for the localization and classification of white blood cells. The dataset utilized comprises two segments: one for localization consisting of 364 annotated images, and another for classification with 12,444 labeled images. The purpose of this study is to develop and evaluate a robust system for the accurate localization and classification of white blood cells using deep learning techniques. The study explores two localization methods—a traditional technique and a deep learning-based approach—and evaluates five deep learning architectures for classification, including three pretrained and two custom models. Upon testing these models on the dataset, the study identifies and evaluates the most effective approach. The localization process achieved an average Intersection over Union (IoU) of 71%, and the classification process reached an accuracy of 92%. The robustness of the model was further assessed by introducing different types of noise to test its resilience. The performance of this system demonstrates high accuracy and resilience to noise, which can be attributed to the use of a large dataset, our developed architectures, and our proposed methodology.

This investigation is part of a topical situation where wireless equipment is gradually being used for energy transfer, particularly for autonomous systems and the use of decarbonized en-ergies. A characteristic example of decarbonized autonomous use is linked to the substitution of thermal engine vehicles by electric vehicles (EVs) equipped with energy storage batteries. This response was considered in an ecological context of reducing air pollution and defending plane-tary biodiversity, which are currently vital. These EVs ultimately operate thanks to the wireless charging of their batteries when stationary or running. By changing long-established means of transport that have become a threat to biodiversity, it is necessary to ensure that innovative re-placement solutions protect this biodiversity. In addition, the construction of wireless power transfer (WPT) battery chargers for these EVs must offer an optimal ecology of clean energy saving. In such a context, the two concepts of One Health (OH) and Responsible Attitude (RA) will find their place in the design and control of WPT tools in EVs. This contribution aims to il-lustrate and analyze the roles of the green and non-wasteful OH and RA approaches in the de-sign and control of WPT embedded in EVs for the smart city (SC) environment. In the paper, WPT tools are first introduced. The design and control of EV battery charging tools are then examined. The biological effects on living tissues due to the electromagnetic field (EMF) radia-tion of WPT are analyzed. The phenomena and equations governing the design of WPT and the effects of EMF radiation are then exposed. The OH and RA approaches in the SC context are af-terward analyzed. The protection against the unsafe effects of WPT tools in the SC environment is consequently explored. The analyses followed in the paper are supported by examples of lit-erature.

The well-being and sociability of individuals have always been part of modernity. The development of new technologies that meet these aspirations is receiving increasing attention. Thus, strengthening the desired objectives of these tools and minimizing their undesirable side effects is the subject of a growing commitment. The present contribution aims, in this context, to evaluate and analyze the desired and undesirable effects of the interaction of electromagnetic fields with living tissues in general. This involves routines reinforcing expected functions as well as those controlling and protecting against undesirable effects. First, the interactions of electromagnetic fields with tissues are analyzed, involving their thermal biological effects of desired and undesired exposures. The roles of blood and sap fluids in bio-affected tissues are then analyzed. Secondly, the governing electromagnetic, bio-heat equations, and their coupled solution are studied. Third, the thermal behavior of tissues and the exposure adverse effects are examined. Next, monitoring and defending of the effects of exposures are discussed. This contribution illustrates and discusses mathematical modeling routines based on a generalized interaction of electromagnetic fields with living tissues.

In this paper, we compile the fractional power series method and the Laplace transform to design a new algorithm for solving the fractional Volterra integro-differential equation. For that, we assume the Laplace power series (LPS) solution in terms of power q=1m,m∈Z+, where the fractional derivative of order α=qγ for which γ∈Z+. This assumption will help us to write the integral, the kernel, and the nonhomogeneous terms as a LPS with the same power. The recurrence relations for finding the series coefficients can be constructed using this form. To demonstrate the algorithm's accuracy, the residual error is defined and calculated for several values of the fractional derivative. Two strongly nonlinear examples are discussed to provide the efficiency of the algorithm. The algorithm gains powerful results for this kind of problem. Under Caputo meaning the obtained results are illustrated numerically, and graphically. Geometrically, the behavior of the solution declares that the changing of the fractional derivative parameter values' in their domain alters the style of the attained solution in a symmetrical meaning and fully coinciding to the ordinary derivative value'. From these simulations, the results report that the recommended novel algorithm is a straightforward, accurate, and superb tool to generate analytic-approximate solutions for Integral, and integro-differental equations of fractional order.

Indoor air quality and public health have always been an area of prime interest across the globe. The significance of low-cost air quality sensing and indoor public health practices spikes during the time of pandemic and epidemics when indoor air pollution becomes a threat to living beings especially human beings. Indoor diseases are hard to diagnose if they are due to the indoor environmental conditions. A major challenge was observed in establishing a baseline between the indoor air quality sensors and associated diseases. In this work, 10,000+ articles from top literature databases were reviewed using bibliometric analysis to formulate indoor air quality sensors and diseases correlation rubrics to critically review 500+ articles. A set of 200+ articles were selected based on for detailed study based on seven bibliometric indices for publications that used WHO, NIH, US EPA, CDC, and FDA defined principles. This review has been conducted to assist end-users, public health facilities, state agencies, researchers, scientists and air quality protection agencies.

The current COVID19 pandemic has raised huge concerns for outdoor air quality due to expected lungs deterioration. These concerns include the challenges in the scalable prediction of harmful gases like carbon dioxide, iterative/repetitive inhaling due to mask and environmental temperature harshness. Even in the presence of air quality sensing devices, these challenges lead to failed planning and strategy against respiratory diseases, epidemics, and pandemics in severe cases. In this work, a dual time-series with bi-cluster sensor data-stream-based novel optimized regression algorithm was proposed with optimization predictors and optimization responses that use automated iterative optimization of the model based on the similarity coefficient index. The algorithm was implemented over SeReNoV2 sensor nodes data, i.e. multi-variate dual time-series of environmental and US Environmental Protection Agency standard sensor variables for air quality index measured from air quality sensors with geospatial profiling. The SeReNoV2 systems were placed at four locations that were 3 km apart to monitor air quality and their data was collected at Ubidots IoT platform over GSM. Results have shown that the proposed technique achieved a root mean square error (RMSE) of 1.0042 with a training time of 469.28 seconds for normal and RMSE of 1.646 in the training time of 28.53 seconds for optimization. The estimated R-Squared error of 0.03 with Mean-Square Error for temperature 1.0084 ᵒC and 293.98 ppm for CO2 was observed. Furthermore, the Mean-Absolute Error (MAE) for temperature 0.66226 ᵒC and 10.252 ppm for CO2 at a prediction speed of ~5100 observations/second for temperature 45000 observations/second for CO2 due to iterative optimization of the training time 469.28 seconds for temperature and 28.53 seconds for CO2 was very promising in forecasting COVID19 countermeasures before time.

Supplier selection/replacement strategies and optimized purchasing policies play a key role in efficient supply chain management in today’s dynamic market. Here we study supplier replacement in a one-level assembly system (OLAS) producing one type of finished product. To assemble the product, we need to provide multi-type components, but assembly will be interrupted if any single component is missing, and incoming units will get hoarded until the missing component arrives. The assembly process can be interrupted by various sources of uncertainty, including delays in component deliveries. There is consequently a non-negligible risk that the assembly process may get stopped any moment. This brings inventory-related costs, which should be minimized. Here we consider discrete lead-time distributions to mimic industry-world reality. We present a model that takes into account not only optimal assignment of component order release dates but also replacement of a critical supplier. For a given unit, we model several alternative suppliers with alternative pricing and lead-time uncertainties, and we evaluate the impact on the total assembly system. For a more general case where several suppliers may be replaced, we propose a genetic algorithm.

Natural calamities observation, study and simulation has always been a prime concern for disaster management agencies. Billions of dollars are spent annually to explore geo-seismic movements especially earthquakes but it has always been a unique accident. The real-time study of seismic waves, ground motions, and earthquakes always needed a programmable mechanical structure capable of physically producing the identical geo-seismic motions with seismology domain definitions. A programmable multi-parametric five degrees of freedom electromechanical seismic wave events simulation platform to study and experiment seismic waves and earthquakes realization in the form of geo-mechanic ground motions is exhibited in this work. The proposed platform was programmed and interfaced through an IoT cloud-based Web application. The geo-mechanics was tested in the range of i) frequencies of extreme seismic waves from 0.1Hz to 178Hz; ii) terrestrial inclinations from -10.000° to 10.000°; iii) velocities of 1km/s to 25km/s iv) variable arrival times 1us to 3000ms; v) magnitudes M1.0 to M10.0 earthquake; vi) epi-central and hypo-central distances of 290+ and 350+ kilometers. Wadati and triangulation methods have been used for entire platform dynamics design and implementation as one of key contributions in this work. This platform is as an enabler for a variety of applications such as training self-balancing and calibrating seismic-resistant designs and structures in addition to studying and testing seismic detection devices as well as motion detection sensors. Nevertheless, it serves as an adequate training colossus for machine learning algorithms and event management expert systems.

Atrial Fibrillation (AF) is known as one of the dominant cardiac disease that is associated with severe consequences such as risk of strokes. This cardiac arrhythmia can be efficiently diagnosed using EEG signals. However, AF episodes in EEG records are not always permanent for all subjects. In addition, lengthy subject preparation and ECG recording sessions makes this practice time consuming and not attractive for efficient diagnosis. One attractive solution for this problem will be the use of wearable Internet of Medical Things IoMT devices for EEG recording and AF detection. From another side the use machine learning for efficient diagnosis could provide high accurate diagnosis. However, the deployment of these wireless wearable devices faces the problems of limited processing capabilities and of energy scarcity. In this context, the design of energy efficient accurate on-sensor AF detection scheme using machine learning algorithms still requires a focused research effort. This paper proposes a wearable solution for ECG-based processing scheme for embedded AF detection. The proposed method achieved 100% sensitivity and 94.5% of specificity and accuracy of around 97.4 % for wide range of subjects while showing low energy-consumption. The obtained results show the efficiency of using Logistic Regression algorithm for accurate AF detection and attest about practical feasibility of the proposed approach in wearable IoMT devices.

This article aims to assess, discuss and analyze the disturbances caused by electromagnetic field (EMF) noise of medical devices used nearby living tissues, as well as the corresponding functional control via the electromagnetic compatibility (EMC) of these devices. These are minimally invasive and non-ionizing devices allowing various healthcare actions involving monitoring, assistance, diagnosis and image-guided medical interventions. Following to an introduction of the main items of the paper, the different imaging methodologies are conferred, accounting for their nature, functioning, employment condition and patient comfort and safety. Then the magnetic resonance imaging (MRI) components and their fields, the consequential MRI-compatibility concept and possible image artifacts are detailed and analyzed. Next, the MRI-assisted robotic treatments, the possible robotic external matter introductions in the imager, the features of MRI-compatible materials and the conformity control of MRI-compatibility, are analyzed and conferred. Afterward, the embedded, wearable and detachable medical devices, their EMF perturbation control and their necessary shielding protection technologies are presented and analyzed. Then, the EMC control procedure, the EMF governing equations, the body numerical virtual models, are conferred and reviewed. A qualitative methodology, case study, simple example illustrating the mentioned methodology is presented. The last Section of the paper discussed potential details and expansions of the different notions conferred in the paper, in the perspective of monitoring the disturbances due to EMF noise of medical devices working near living tissues.

The current revolution in communication and information technology is facilitating the Internet of Things (IoT) infrastructure. Wireless Sensor Networks (WSN) are a broad category of IoT applications. However, power management in WSN poses a significant challenge when the WSN is required to operate for a long duration without the presence of a consistent power source. In this paper, we develop a batteryless, ultra-low-power Wireless Sensor Transmission Unit (WSTx) depending on the solar-energy harvester and LoRa technology. We investigate the feasibility of harvesting ambient indoor light using polycrystalline photovoltaic (PV) cells with a maximum power of 1.4mW. The study provides comprehensive power management design details and a description of the anticipated challenges. The power consumption of the developed WSTx was 21.09µW during the sleep mode and 11.1mW during the operation mode. The harvesting system can harvest energy up to 1.2mW per second, where the harvested energy can power the WSTx for six hours with a maximum power efficiency of 85.714%.

The classical joint economic lot-sizing (JELS) policy in a single-vendor single-buyer system generates an equal production quantity in all cycles, where the input parameters remain static indefinitely. In this paper, a new two-echelon supply chain inventory model is developed involving a hybrid production system that simultaneously focuses on green and regular production methods with optimal allocation fraction of green and regular productions. Unlike the classical mathematical formulation, each cycle is independent from the previous one, and consequently, the input parameters can be adjusted to be responsive to the dynamic nature of demand rate and price fluctuation. A rigorous heuristic approach is used to derive a global optimal solution for a joint hybrid production system. The model accounts for carbon emissions from production and storage activities related to green and regular produced items along with transportation activity under a multi-level emission-taxing scheme. The results emphasize the significant impact of green production on emissions. That is, the higher the allocation fraction of green production the lower the total amount of emissions generated by the system, i.e., the system becoming more sustainable. Adopting a hybrid production method not only decreases the greenhouse gas (GHG) emissions dramatically, but also reduces the per unit time total cost when compared with regular production. One of the main findings is that the total system cost generated by the base closed-form formula of the proposed model is considerably lower than that of the existing literature i.e., 33.59% (16.13%) lower in the first cycle (subsequent cycles) when the regular production method is assumed. Moreover, the optimal production rate generated by the proposed model is the one that minimizes the emissions production function. Illustrative examples and special cases that reflect different realistic situations are compared to outline managerial insights.

The mathematical modelling of reverse logistics inventory systems ignores that returned items may arrive out of sequence, i.e. with different number of remanufacturing times. Moreover, such modelling assumes that the retuned items may retain the same quality upon recovery regardless of how many times they have been previously remanufactured. This paper develops a new mathematical expression of the percentage of retuned items that can be remanufactured a finite number of times. The proposed expression is modelled as a function of the expected number of times an item can be remanufactured on its life cycle and the number of times an item can be technologically (or optimally) remanufactured based on its quality upon recovery. The model developed in this paper considers joint production and remanufacturing options. The return rate is a varying demand dependent rate, which is a decision variable with demand, product deterioration, manufacturing and remanufacturing rates being arbitrary functions of time. The model considers the initial inventory of returned items in the mathematical formulation, which enables decision makers to adjust all functions and input parameters for subsequent cycles. Illustrative examples indicate that dependent purchasing price of recovery items and the incorporation of remanufacturing investment cost significantly impact on the optimal remanufacturing policy.

This study presents the design and comprehensive 3D multiphysics simulation of a novel microfluidic immunosensor for real-time, non-invasive monitoring of pro-inflammatory biomarkers in human sweat. The patch-like device, designed using COMSOL Multiphysics, integrates magnetofluidic manipulation with direct-field capacitive sensing. The sensor comprises two distinct units: an immunocomplex enhancement unit, employing a series of microcoils to optimize the binding efficiency, reaction kinetics, and homogeneity of biomarker-magnetic nanoparticle (MNP) interactions, thereby enhancing the sensor's specificity; and a layered capacitive sensing unit, designed to concentrate and detect biomarker-tagged MNPs, thus amplifying sensitivity. Simulations of the capacitive sensing unit revealed a substantial sensitivity increase of up to 42.48\% at an 85\% MNP concentration within the detection zone. These findings highlight the potential of the proposed immunosensor for efficient and precise real-time biomarker monitoring, which may facilitate early disease diagnosis and enable personalized healthcare interventions.

The present study was designed to investigate the bioactive compound in Rumextunetanus extracts (polygonaceae), a plant growing in GarâaSejnane region (NW-Tunisia). Hydro-methanol extracts of flowers and stems of Rumextunetanus were analyzed by RP-UHPLC-ESI-QTOF-MS in the negative mode to identify the maximum of bioactive compounds. Applied the aforementioned method, a total of 60 bioactive compounds were characterized for the first time in Rumextunetanus between them, 18 photochemical were firstly identified in the Polygonaceae family in negative ionization mode. Quantification of the identified compounds revealed that quercetin-3-O-glucuronide and (-)-epicatechingallate were the most abundant phenolic compounds in flowers and stems, respectively. Moreover, positive correlations were found between the antioxidant activity measured by DPPH and FRAP assays with the total phenolic compounds (r = 0.98; r = 0.99, respectively) and the abundance of some phenolic subfamilies such as hydroxycinnamic acids, hydroxybenzoic acids, flavonols and flavones with r > 0.86. The compounds displaying significant (P < 0.01) and good correlations with the antioxidant activity (r > 0.93) were hydroxybenzoic acid, rutin, quercetin-3-O-glucuronide, quercetin-3-O-glucoside, quercetin and luteolin-7-O-rutinoside. In addition, the flowers and stems of Rumex tunetanus showed different bioactive compound profiles and significant antioxidant properties of extracts. These results highlight the potential of the RP-UHPLC-ESI-QTOF-MS and MS/MS system to identify untargeted metabolic profiling of Rumex tunetanus. Overall, these results contribute to the clear explanation of the past and current usage of genus Rumex in folk medicine. Future investigations are necessary to develop purified antioxidant extracts, with the application of more selective extraction techniques.

E-commerce is a rapidly evolving global trend that is having a significant impact on consumer behavior and business strategies. Despite its growing impact, e-commerce adoption by Moroccan firms remains low and research on this topic in this context is scarce. This study aims to fill this gap by investigating the main determinants influencing e-commerce adoption by Moroccan firms. We use logit, probit, and conditional mixed process-probit models to identify the critical factors driving e-commerce adoption. Our results reveal five key findings. First, newer firms that are more open to innovation and change are more likely to adopt e-commerce. Second, firms with a higher proportion of highly educated employees are more likely to adopt e-commerce. Third, the digital skills of new employees do not directly influence the likelihood of e-commerce adoption. Fourth, being listed on digital platforms increases the likelihood of e-commerce adoption. Finally, there is a positive relationship between firms engaged in innovation activities and e-commerce adoption. These findings highlight the need for additional investment in promoting modern organizational practices, reskilling workers, and implementing advanced technologies to facilitate effective e-commerce integration among Moroccan SMEs. By addressing these challenges, Moroccan firms can harness the full potential of e-commerce and contribute to the country’s economic growth and digital transformation.

Swift and diligent resilience response is mandatory in sustainable geo-distributed ecosystems. The real-time geo-spatial resilience requires agility in millions of parallel and distributed data processing tasks on data acquired from regional condition monitoring(RCM) systems. These tasks include expiditous resolution of complex sustainability conflict sets, promptly anomalies characterization in chaos sets, and resilience response uniqueness. This work is an archetype of a paragon geo-resilience support system(GRSS) for regional sustainability using a novel melioration in DADO production machine. The proposed expert system capitalized the synergic strengths of RETE, TREAT, LEAPS and GATOR networks was designed and implemented as a synthetic DADO machine(SDM). The generic architecture of DADO machine was improved in this work by enrichment in rule set conditions and solution set for regional scale resilience rule set conditions. The condition left-hand side(LHS) X equal to the solution set 2X for right-hand side (RHS) was the goal achieved by working memory(WM) optimization and conflict resolution strategy(CRS) in alpha and beta networks rules. A round-trip time of 80.2 seconds for first event response set using 1492 segment size and sequence number 360,000 with maximum packets at a single geospatial structure was 21 packets/sec was a noticeable landmark in this work. LEAPS and Concurrent-read algorithm for GATOR cluster networks in the proposed synthetic DADO machine architecture was the overall implementation that enabled urban scale resilient system practically possible on physical SHM deployment.

Herein, we have fabricated graphitic carbon nitride (g-C3N4) nanosheets with embedded ZnCdS nanoparticles to form a type II heterojunction using a facile synthesis approach and used for photocatalytic H2 production. The morphologies, chemical structure and optical properties of the obtained g-C3N4‒ZnCdS samples were characterized by a battery of techniques such as, TEM, XRD, XPS and UV-Vis DRS. The as-synthesized g-C3N4‒ZnCdS, photocatalyst exhibits the highest hydrogen production rate of 108.9 μmol·g-1·h-1 compared to individual components (g-C3N4: 13.5 μmol·g-1·h-1, ZnCdS: 45.3 μmol·g-1·h-1). The improvement of its photocatalytic activity is mainly attributed to the heterojunction formation and resulting synergistic effect, which provide more channels for charge carrier migration and reduce the recombination of photogenerated electrons and holes. Meanwhile, the g-C3N4‒ZnCdS heterojunction catalyst also showed higher stability over a number of repeated cycles. Our work sheds insight of using g-C3N4 and metal sulfide combination to develop low-cost, efficient, visible-light active hydrogen production photocatalysts.

The emergence of blockchain know-how currently presents the opportunity for the health sector to adopt such technologies in electronic health records. Blockchain assists in maintaining and sharing the relevant medical records of the patient with the relevant group of healthcare providers and the hospital. Numerous specific applications include traceability of drug and patient monitoring or Electronic Health Records (EHR). While Blockchain assists in maintaining and sharing the relevant medical records of the patient with the relevant group of healthcare providers and the hospital, it is important to note that the moral consciousness of the healthcare professionals is the main guide of the moral consciousness is ethics. This paper presents an overview of the application of blockchain in the healthcare and medical sector, highlighting the specific challenges and concerns. The study adopted a systematic review of secondary literature in answering the research question.

Effective sports training should be attuned to the athlete's specific conditionings and characteristics. In motor learning research, two often neglected factors that influence this resonance are the learner's athletic background and the structural diversity of exercises (e.g., relative similarity). This study examines the effects of three learning approaches (i.e., contextual interference (CI), differential learning (DL), and free-play control condition (CO)) on the parallel learning of Handball (HB), Volleyball (VB), and Basketball (BB) skills, considering participants' prior sport backgrounds. Forty-five males (15 HB, 15 VB, and 15 BB players) with a mean age of 22±1.4 years and at least 6 years of experience in the mastered discipline voluntarily participated in this study. A pre-post-retention test design including a 6-week-intervention program was employed. In terms of short-term (pre-post) gain, only the DL- group significantly improved their performance in both non-mastered disciplines (p=0.03 for the BB free-throw and p=0.05 for the HB shooting tests), with a trend (ES=0.53) towards an improvement in the performance of the mastered VB underarm-pass skill. In terms of relatively permanent gains, the CI group significantly improved their performances from pre- to retention-test only in the non-mastered BB free-throw skill (p=0.018). In contrast, the DL group significantly improved their performance at retention compared to the pre-test in both non-mastered BB (p=0.004) and HB (p=0.003) skills, with a trend (ES=0.4) towards improvement in the mastered VB test. In both short, and relatively permanent terms, higher composite score gains were observed in DL compared to CI (p=0.001 and 0.002) and CO (p=0.001 and <0.0001). In conclusion, the present findings provide additional support for the potential advantages of the DL model over those of CI. These findings can serve as the basis for tailored training and intervention strategies and provide a new perspective for addressing various issues related to individual and situational learning.

This paper presents a study conducted to identify, assess, rank, and compare the most influencing factors causing schedule delay during construction phase of petrochemical projects in Saudi Arabia. The methodology followed in this research to achieve the main aims is a combination of comprehensive review of the literature and interviewing number of local experts, which have resulted in identifying of 23 factors. Through a web-based questionnaire survey, the identified factors were ranked. Total of 90 completed responses were gathered from 106 received responses. The completed responses gathered from 38 contractors and 52 owners. Of 90 participants, there are 32 project managers, 22 project engineers, 7 construction supervisors and the other 31 having different positions in projects departments The study has found that the most influencing factors causing schedule delay during construction in petrochemical projects in Saudi Arabia are “Poor site management and supervision by contractors”; “Conflict between main contractor and subcontractor”; “poor planning and scheduling of projects by contractor”; “Delay of material or equipment delivery”; and followed by “Delay in Handing Over Construction Site to Contractor”. This paper is original in the sense that the areas of knowledge and practice covered in the identified factors were distributed and not available in one source. The factors are derived from personal interviews with selected project managers, project engineers, construction supervisors and the others from different positions in project department and from the relevant literature.

In view of intensified disasters and fatalities caused by natural phenomena and geographical expansion, there is a pressing need for a more effective environment logging for a better management and urban planning. This paper proposes a novel utility computing model (UCM) for structural health monitoring (SHM) that would enable dynamic planning of monitoring systems in an efficient and cost-effective manner. The proposed UCM consists of network-attached data drive that stores data from SHM logger, population count system and Geographic Information System (GIS) enhanced with a Cloud IoT data backup, display, and analysis server. The UCM using this data and data from building information systems applies a simple machine learning algorithm to generate real-time structure health and suggests re-planning of SHM units. The health of structure varies dynamically with disturbances created by higher occupancy and structure density per zone. The proposed SHM-UCM is unique in terms of its capability to manage heterogeneous SHM resources. This was tested in a case study on Qatar University (QU) in Doha Qatar, where it looked at where SHM nodes are distributed along with occupancy density in each building. This information was taken from QU simulated occupation and zone calculation models and then compared to ideal SHM system data. Results show the effectiveness of the proposed model in logging and dynamically planning SHM.

In this study, we mainly focus on the behavior of an electron gas produced by argon plasma that is bounded by a moving rigid flat plate. The effects of an external magnetic field on the electrons collected with each other, with positive ions, and with neutral atoms in the plasma fluid are investigated. We used the BGK model of the Boltzmann kinetic equation, which is fundamental in the study of the gas dynamics from the continuum flow to the free-molecular regimes with Maxwellian velocity distribution functions of the various species. An exact analytical solution of the model equations for the unsteady flow is given using the moment and the traveling wave methods. The behavior of the mean velocity of electrons is illustrated, which compatible with the variation of the shear stress, viscosity coefficient, and the initial and boundary conditions. Besides, the thermodynamic prediction is investigated by applying the principles of irreversible thermodynamics and Gibbs formula. It is found that the thermodynamic variables verify the Boltzmann’s H–theorem, the principle of Le Chatelier, and the Thermodynamics Second Law for the non-equilibrium processes of the system. Qualitative agreements with previous related papers are introducing. 3-Dimensional graphics for the calculating variables are offering, and their behavior is deeply discussed.

Plaque psoriasis is a common, long-lasting illness that affects the immune system and causes significant negative impacts on a patient's physical health, well-being, and ability to work effectively. Deucravacitinib (DEU) is the first oral medication used in the treatment of plaque psoriasis, a chronic skin condition that causes red, scaly patches on the skin. DEU is a type of medication called an oral Janus kinase (JAK) inhibitor, which works by blocking specific enzymes that play a role in the inflammation and immune response associated with psoriasis. Therefore, a quick, easy, novel, reliable, sensitive, and straightforward Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) approach was used to analyse DEU in plasma samples. The LC-MS/MS method for the determination of DEU in human plasma was based on using trimethoprim as an internal standard (IS). The separation of DEU and IS was carried out via liquid-liquid extraction (LLE). The isolated substances were then subjected to the chromatographic system using the ACE-C18 column (4.6x100 mm, 5 µm). The mobile phase employed consisted of methanol and a solution of 2 mM ammonium formate (80:20 v/v, respectively). The flow rate used was set at 0.9 mL min-1. The creative strategy was performed by running an ABSCIEX API 4000 mass spectrometer with an electron spray ionization source in Multiple Reaction Monitoring (MRM) modes. The ion transitions m/z 426.3  358.2 was used for DEU quantitation, while the ion transitions m/z 291.1  261.1 was used for trimethoprim quantitation. The accuracy, precision, linearity, recovery, and selectivity of DEU were deemed acceptable when validated for a concentration range between 0.500 to 601.050 ng/mL, utilizing a weighting factor of 1/x2.

As the first initiative of its kind in Algeria, here is presented a solar-powered mobile “Ultraviolet Germicidal Irradiation” disinfection unit (UVGI) based on a special germicidal ultraviolet-C (UVC) radiator. The system was designed to disinfect several objects such as: medical tools, reusable masks, face-shields, gloves, phones, laptops, keys, money and many other portable devices that need to be disinfected/sterilized. It offers the advantage of complete autonomy through the built-in photovoltaic (PV) system that includes a solar panel, a gel battery, a charge controller and a power inverter. The system provides an extra 220V-50Hz outlet with 375VA maximum power to be used when energy is needed. The system is easily scalable to generate higher ultraviolet dosages by adding more UVC lamps. The chemical-free germicidal UVC sanitizing method employed by this device effectively disactivates a very wide range of microorganisms (microbes, bacteria and fungi and viruses including the actual SARS-CoV-2 that causes COVID-19 respiratory disease) and it has several advantages in comparison to chemical-based sanitizing methods. The total cost to make this open source device is below 1000 € and is easily customizable and scalable. This device is an open source, secure and fast equipment for objects and surface disinfection. The device will be fully automated by adding PIR sensors or remote control after further funding will be received.

The transition to sustainable energy systems in the Middle East and North Africa (MENA) region addresses critical challenges of environmental protection, energy security, and socio-economic resilience. Using neo-institutional theory, this paper examines the intricate relationship between formal and informal institutions and their significant impact on the region’s energy transition. Despite the MENA region’s abundant renewable energy resources, numerous institutional barriers, such as governance inefficiencies, regulatory inconsistencies, and entrenched socio-cultural norms, significantly hinder this transition. Through a review of existing literature, this study presents a comprehensive analytical framework designed to overcome these barriers, with a focus on the Just and Sustainable Energy Transition model. This strategic model emphasizes equity, sustainability, and inclusive governance as pillars for reform. The study offers detailed recommendations for institutional change and underscores the importance of collaborative efforts among governments, industry stakeholders, and international partners to unlock the MENA region’s renewable energy potential, advance global sustainability goals, and ensure a more secure and resilient energy future.

Spinal and bulbar muscular atrophy (SBMA), also known as Kennedy’s disease, is a debilitating neuromuscular disease characterized by progressive muscular weakness and neuronal degeneration, affecting 1-2 individuals per 100,000 globally. While SBMA is relatively rare, recent studies have shown a significantly higher prevalence of the disease within the indigenous population of Western Canada compared to the general population. The disease is caused by a pathogenic expansion of polyglutamine residues in the androgen receptor protein, which acts as a key transcriptional regulator for numerous genes. SBMA has no cure, and current treatments are primarily supportive and focused on symptom management. Recently, a form of precision medicine known as antisense therapy has gained traction as a promising therapeutic option for numerous neuromuscular diseases. Antisense therapy uses small synthetic oligonucleotides to confer therapeutic benefit by acting on pathogenic mRNA molecules, serving to either degrade pathogenic mRNA transcripts or helping to modulate splicing. Recent studies have explored the suitability of antisense therapy for the treatment of SBMA, primarily focused on antisense-mediated mRNA knockdown approaches. Advancements in understanding the pathogenesis of SBMA and the development of targeted therapies offer hope for improved quality of life for individuals affected by this debilitating condition. Continued research is essential to optimize these genetic approaches, ensuring their safety and efficacy.

Introduction:In this study we evaluated the connivance of oxidative and antioxidative parameters in the pathogenesis of spinal cord injury (SCI). Although the etiology and pathogenesis of SCI remain to be fully understood, it has been suggested that reactive oxygen species (ROS) and oxidative stress may play a significant role in the pathophysiology of SCI. Furthermore, there is little information available in scientific literature about oxidative and antioxidative parameters in SCI patients. Methods:Oxidative stress was determined by measuring the levels of Lipid Peroxides (LPO) and Protein carbonyl in plasma and antioxidative parameters like Glutathione Reductase (GR), catalase and Glutathione peroxidase (GPx) in lysate in 40 SCI patients and 40 healthy subjects without SCI. However, pain was measured by McGill pain questionnaire. Results: Concentrations of catalase (p<0.01), GR (p<0.01) and GPx (p<0.01) were significantly lower in patients with SCI than in controls, and levels of oxidative stress parameters, LPO (p<0.01), Protein carbonyl (p<0.01) were significantly higher in patients than in controls. A significant positive correlation was found between LPO and pain score among SCI patients group. Furthermore, a significant positive correlation was also found between Protein carbonyl and pain score among SCI patients group than in control group. Conclusion: The present results indicate that SCI patients are exposed to oxidative stress and this escalated oxidative stress may play a role in the etiopathogenesis of the disease. Moreover, our results also show that increased oxidative stress parameters are more strongly amalgamated with pain in SCI patients.

Current research in the field of antimicrobials is focused on the development of novel antibiotics and antimicrobial agents to counteract the huge dilemma that the human population is mainly facing in regards to the rise of bacterial resistance and biofilm infections. Host Defense peptides (HDPs) are a promising group of molecules for antimicrobial development as they share unique characteristics suitable for antimicrobial activity including their broad spectrum of activity and potency against bacteria. AamAP1 is a novel HDP that was identified through molecular cloning from the venom of the North African scorpion Androctonus amoeruxi. In vitro antimicrobial assays revealed that the peptide displays moderate activity against different strains of Gram-positive and Gram-negative bacteria. Additionally, the peptide proved to be highly hemolytic and displaying significantly high toxicity against mammalian cells. In our study, a novel synthetic peptide analogue named A3 was designed from the naturally occurring scorpion venom host defense peptide. The design strategy depended on modifying the amino acid sequence of the parent peptide in order to increase its net positive charge, percentage helicity and optimize other physico-chemical parameters involved theoretically in HDPs activity. Accordingly, A3 was evaluated for its in vitro antimicrobial and anti-biofilm activity individually and in combination with four different types of conventional antibiotics against clinical isolates of multi-drug resistant (MDR) Gram-positive bacteria. A3 was also evaluated for its cytotoxicity against mammalian cells. A3 displayed potent and selective in vitro antimicrobial activities against a wide range of MDR Gram-positive bacteria. Our results also showed that combining A3 with conventional antibiotics displayed a synergistic mode of action which resulted in decreasing the MIC value for A3 peptide as low as 0.125 µM. These effective concentrations were associated with negligible toxicities on mammalian cells. In conclusion, A3 exhibits enhanced activity and selectivity when compared with the parent natural scorpion venom peptide. The combination of A3 with conventional antibiotics may be pursued as a potential novel treatment strategy against MDR and biofilm forming bacteria.

Portable Document Format (PDF) files are one of the most universally used file types. This has fascinated hackers to develop methods to use these normally innocent PDF files to create security threats via infection vectors PDF files. This is usually realized by hiding embedded malicious code in the victims’ PDF documents to infect their machines. This, of course, results in PDF Malware and requires techniques to identify benign files from malicious files. Research studies indicated that machine-learning methods provide efficient detection techniques against such malware. In this paper, we present a new detection system that can analyze PDF documents in order to identify benign PFD files from malware PFD files. The proposed system makes use of the AdaBoost decision tree with optimal hyperparameters, which is trained and evaluated on a modern-inclusive dataset, viz. Evasive-PDFMal2022. The investigational assessment demonstrates a lightweight-accurate PDF detection system, achieving a 98.84% prediction accuracy with a short prediction interval of 2.174 μSec. To this end, the proposed model outperforms other state-of-the-art models in the same study area. Hence, the proposed system can be effectively utilized to uncover PDF malware at high detection performance and low detection overhead.

In the upper charged layers of the atmosphere, the plasma is very rarefied. The collisions between its molecules are almost non-existent, and the driving forces behind them are the Lorentz forces resulting from the electric and magnetic fields. For this reason, we are interested in studying the behavior of non-collision plasmas because of its essential applications, such as the movement of satellites in the charged atmosphere. In this paper, the flow problem of collisionless gaseous plasma is examined. For that propose, we solve the unsteady Vlasov-Maxwell system of non-linear partial differential equations analytically. Methods of moments and traveling wave parameters are used to acquire an exact solution. Specific macroscopic properties of collisionless gaseous plasma are calculated along with electrical and magnetic fields. Further, thermodynamic estimation, such as entropy and entropy production, is presented. Those calculations allow us to measure the consistency with the laws of non-equilibrium thermodynamics. Relations between internal energy modification participations are predicted using Gibbs' equation for collisionless plasma. The modification effect of internal energies due to electro-magnetic fields is found to be small compared with the internal energy change due to the effect of entropy. That is because these fields are self-induced by plasma particles due to the sudden movement of the rigid plane plate. The results are accomplished according to the typical argon gaseous plasma model. Three-dimensional diagrams showing the measured variables are drawn to investigate and discuss their behavior. The problem has many commercial applications for the movement of objects in the charged atmosphere.

Breast cancer is the most common cause of death for women worldwide. Thus, the ability of artificial intelligence systems to predict and classify breast cancer is very important. In this paper, a hybrid ensemble method classification mechanism is proposed based on a majority voting mechanism. First, the performance of different state-of-the-art machine learning classification algorithms for the Wisconsin Breast Cancer Dataset (WBCD) were evaluated. The three best classifiers were then selected based on their F3 score. F3 score is used to emphasize the importance of false negatives (recall) in breast cancer classification. Then, these three classifiers, simple logistic Regression learning, stochastic gradient descent learning and multilayer perceptron network, are used for ensemble classification using a voting mechanism. We also evaluated the performance of hard and soft voting mechanism. For hard voting, majority-based voting mechanism was used and for soft voting we used average of probabilities, product of probabilities, maximum of probabilities and minimum of probabilities-based voting methods. The hard voting (majority-based voting) mechanism shows better performance with 99.42% as compared to the state-of-the-art algorithm for WBCD.

Wireless sensor networks (WSNs) are a critical research area with numerous practical applications. WSNs are utilized in real-life scenarios, including environmental monitoring, healthcare, industrial automation, smart homes, and agriculture. As WSNs advance and become more sophisticated, they offer limitless opportunities for innovative solutions in various fields. However, due to their unattended nature, it is essential to develop strategies to improve their performance without draining the battery power of the sensor nodes, which is their most valuable resource. This paper proposes a novel sink mobility model based on constructing a bipartite graph from a deployed wireless sensor network. Using the bipartite graph’s properties, the mobile sink node can visit stationary sensor nodes in an optimal way to collect data and transmit it to the base station. We evaluated the proposed approach through simulations using the NS-2 simulator to investigate the performance of wireless sensor networks when adopting this mobility model. Our results show that using the proposed approach can significantly enhance the performance of wireless sensor networks while conserving the energy of the sensor nodes.

In this work, a new flexible antenna integrated with OLED light sources is presented for WiMAX wireless communication systems. The proposed antenna was placed on a 100% polyester base with a thickness of 1.5 mm and achieved a high gain. We evaluated and tested its performance, including reflection coefficient, radiation pattern and gain. The flexible and simple patch antenna has been designed to operate at 3.5 GHz for WiMAX wireless communication systems with a gain value of 5.38 dB. This article proves the applicability of the proposed material for the integration of flexible antennas in OLEDs while maintaining gain performance similar to conventional flat antennas.

Consumption is thus fundamentally related to sustainably because every decision pertaining to what to buy, what quantity the buy, how many to consume, or how to dispose of things has a direct influence on the natural world and the generations to come, and the overall impact of every single the customer's purchase is disastrous. A framework-based systematic literature review (SLR) was conducted to better comprehend the body of research on digital innovation and sustainability driving consumer behavior. This was done in order to acquire a deeper understanding of the studies that have already been done in this area. to provide (i) a comprehensive review of the current research landscape and (ii) a rich roadmap for future research. This study evaluated the literature especially in terms of theory, context, traits, and methodology. A total of 107 research articles published between 2013 and 2022 were found using scientific methods in the Scopus database. The findings showed that most research appears to have employed qualitative methodologies and was grounded in the setting of China and Italy. This review could help scholars better grasp the relationship between digital innovation and sustainability, opening the door for additional study and advancement in the field. Additionally, by extending the literature study and emphasizing the elements that can improve digital innovation and sustainability, practitioners will be given a better overall understanding of how to approach the problem.

Background: Renal cancers are among the top ten causes of cancer-specific mortality, of which the ccRCC subtype is responsible for most cases. The grading of ccRCC is important in determining tumour aggressiveness and clinical management. Objectives: The objectives of this research were to predict the WHO/ISUP grade of ccRCC pre-operatively and characterise the heterogeneity of tumour sub-regions using radiomics and ML models, including comparison with pre-operative biopsy-determined grading in a sub-group. Methods: Data were obtained from multiple institutions across two countries, including 391 patients with pathologically proven ccRCC. For analysis, the data were separated into four cohorts. Cohorts 1 and 2 included data from the respective institutions from the two countries, cohort 3 was the combined data from both cohort 1 and 2, and cohort 4 was a subset of cohort 1, for which both the biopsy and subsequent histology from resection (partial or total nephrectomy) were available. 3D image segmentation was carried out to derive a voxel of interest (VOI) mask. Radiomics features were then extracted from the contrast-enhanced images, and the data were normalised. The Pearson correlation coefficient and the XGBoost model were used to reduce the dimensionality of the features. Thereafter, 11 ML algorithms were implemented for the purpose of predicting the ccRCC grade and characterising the heterogeneity of sub-regions in the tumours. Results: For cohort 1, the 50% tumour core and 25% tumour periphery exhibited the best performance, with an average AUC of 77.9% and 78.6%, respectively. The 50% tumour core presented the highest performance in cohorts 2 and 3, with average AUC values of 87.6% and 76.9%, respectively. With the 25% periphery, cohort 4 showed AUC values of 95.0% and 80.0% for grade prediction when using internal and external validation, respectively, while biopsy histology had an AUC of 31.0% for the classification with the final grade of resection histology as a reference standard. The CatBoost classifier was the best for each of the four cohorts with an average AUC of 80.0%, 86.5%, 77.0% and 90.3% for cohorts 1, 2, 3 and 4 respectively. Conclusion: Radiomics signatures combined with ML have the potential to predict the WHO/ISUP grade of ccRCC with superior performance, when compared to pre-operative biopsy. Moreover, tumour sub-regions contain useful information that should be analysed independently when determining the tumour grade. Therefore, it is possible to distinguish the grade of ccRCC pre-operatively to improve patient care and management.

This article presents the development of an innovative Maximum Power Point Tracking (MPPT) strategy, utilizing a Particle Swarm Optimization (PSO) algorithm to improve the effectiveness of PV systems and expedite convergence. The new MPPT method incorporated a unique Swarm Self-Reinforcement Mechanism (SSRM) within the PSO algorithm, targeting quick convergence and excellent tracking accuracy. This approach enables the PSO to eliminate the fitness function that has the lowest value and subsequently reinforce it in the next iteration, revolving around the global maximum power point (GMPP). By applying this novel PSO-based method, the MPPT performance of PV systems was significantly improved, facilitating the algorithm to proficiently navigate through the solution space and quickly locate the GMPP, even in rapidly changing environmental conditions. The outcomes derived from this novel approach were contrasted with other algorithmic optimization methods, validating its superior convergence speed and tracking accuracy. Different swarm sizes were examined using SSRM, and the optimal swarm size for the system employing MPPT was identified to achieve the lowest convergence time (CT). The results showcased the impressive performance capabilities of this novel strategy, resulting in a time con-traction of up to 28% compared to the conventional PSO technique, where the optimal swarm size was found to be 5. This achievement marks a significant milestone in the evolution of PSO-based MPPT techniques, and paves the way for future advancements in this exciting field.

Efficient energy extraction in photovoltaic (PV) systems relies on the effective implementation of Maximum Power Point Tracking (MPPT) methods. Conventional MPPT techniques often suffer from slow convergence speeds and suboptimal tracking performance, particularly under dynamic variation of environmental conditions. Smart optimization algorithms (SOA) using metaheuristic optimization algorithms can avoid this limitation inherent in the conventional MPPT methods. The problem of slow convergence of the SOA is avoided in this paper using a novel strategy called Swarm Size Reduction (SSR) utilized with Particle Swarm Optimization (PSO) algorithm, specifically designed to achieve short convergence time (CT) while maintaining exceptional tracking accuracy. The novelty of the proposed MPPT method introduced in this paper is the dynamic reduction of the swarm size of the PSO for improved performance of the MPPT of the PV systems. This adaptive reduction approach allows the algorithm to efficiently explore the solution space of PV systems and rapidly exploit to identify the global maximum power point (GMPP) even under fast fluctuation of uneven solar irradiance and temperature. This pioneering ultra-fast MPPT method represents a significant advancement in PV system efficiency and promotes the wider adoption of solar energy as a reliable and sustainable power source. The novel adaptive PSO algorithm also opens new possibilities for further innovations in optimization-driven applications, extending its potential impact on a diverse range of real-world challenges. The results obtained from this proposed strategy are compared with several optimization algorithms to validate its superiority.

We describe a 90-year-old male presenting with disequilibrium, loss of balance and difficulty walking for three days prior to initial presentation. Interestingly, he denied cough, fever or dyspnea prior to arrival. Over the course of 48 hours, the patient developed acute respiratory distress syndrome (ARDS) requiring intubation, diagnosed with COVID-19 infection and was treated in the intensive care unit where he died. Since the initial cases in Wuhan China in Dec 2019, the medical and epidemiological communities have learned much about the presenting features, symptomatology, epidemiology, transmission and common physical, laboratory and radiological findings of this disease. Although common symptoms are already established, it is very important to learn and record atypical symptoms or presentations of this highly contagious disease. By doing so, we will be able to recognize earlier atypical symptoms and prevent the environmental exposure to Health care workers and future patients as well. We report that Central disequilibrium may be such as initial presenting sign and symptom of impending respiratory failure from SARS-CoV-2 virus. These atypical findings such as presyncope may precede common respiratory complications of SARS-CoV-2.

The development of sustainability, the improvement of the quality of life, and the protection of future generations have become of prime importance in light of climate changes and carbon emissions. Universities are at the top of institutions that should participate in creating an environmentally friendly infrastructure. This study thus aimed to explore the extent to which Saudi universities achieve sustainability in the light of the Saudi Green Initiative from the faculty members’ perspective. Surely, this investigation would produce a proposal to promote sustainability in Saudi universities. A questionnaire consisting of five dimensions, namely academic sustainability, community partnership, resource management, planning and administration, and innovation and leadership was developed and administered to 120 faculty members from five Saudi universities. The participants’ ratings of Saudi universities’ achievement of sustainability dimensions ranged from high to moderate. Based on the results, a proposal was offered to take sustainability in Saudi universities to a higher level.

Hepatitis-C is one of the most common viral diseases caused by hepatitis C virus (HCV). It is responsible for millions of deaths each year in the developing world. The common dissemination paths of HCV include the use of contaminated water and transfusion of infected blood. Control of this virus has become a challenge for scientists and health professionals due to its versatility and adaptability in different host environments. Along with other problems, lack of efficient diagnosis, quantification and genotyping of viral strains are the major hindrances in a management of this notorious epidemic. The knowledge of HCV genotype and an amount of virus in patient’s blood are pre-requisites to determine the duration and method of treatment. In this review, we discuss the implications of HCV molecular diagnostic methods and their clinical applications. We conclude that while, several commercial and home-brewed methods are available for this purpose, and there is a visible vacuum for cost effective, robust, sensitive assays that can detect multiple viral genotypes in a single reaction. We are of the view that the level of sensitivity offered by Reverse Transcriptase-Polymerase Chain Reaction (RT-PCR) technique is unequivocal as compared to other techniques. Therefore, researchers may explore further possibilities using this technique in the management of HCV.

Existing implants used with Total Knee Arthroplasty (TKA), Total Hip Arthroplasty (THA), and other joint reconstruction treatments, have displayed premature failures and frequent needs for revision surgery in recent years, particularly with young active patients who represent more than 55% of all joint reconstruction patients. Bone cement and stress shielding have been identified as the major reasons for premature joint failures. A breakdown of the cement may happen, and revision surgery may be needed because of the aseptic loosening. The significant mismatch of stiffness properties of patient trabecular bones and metallic implant materials in joint reconstruction surgery results in the stress shielding phenomenon. This could lead to significant bone resorption and increased risk of bone fracture and the aseptic loosening of implants. The present project introduces an approach for development of customized cellular structures to match the mechanical properties and architecture of human trabecular bone. It consists of four modules:1- characterization of geometry, microarchitecture, and stiffness properties of patient’s bones; 2- developing customized lattice structures tailored to mimic properties established in module 1; 3 - integration of developed lattice structure into full scale implant design and manufacturing; 4- implementation of the developed technology for use in implants that would overcome most of the issues related to aseptic loosening phenomenon. The present work aims at fulfilling the objectives of module 2 by exploring new designs of customized lattice structures and texture tailored to mimic closely patients’ bone anisotropic properties and that can incorporate an engineered biological press-fit fixation technique. The effects of various lattice design variables on mechanical performance of the structure are examined through systematic experimental plan using statistical design of experiments technique and analysis of variance method. All tested lattice designs were explored under realistic geometrical, biological, and manufacturing constraints. Of the four design factors examined in this study, strut thickness was found to have the highest percent contribution (41%) regarding the structure stiffness, followed by unit cell type, and cell size. Srut shape was found to have the lowest effect with only 11% contribution. The introduced solution offers lattice structure designs that can be adjusted to match bone stiffness distribution and promote bone ingrowth and hence eliminating the phenomenon of stress shielding while incorporating biological press-fit fixation technique.

In recent years, weeds is responsible for most of the agricultural yield losses. To deal with this threat, farmers resort to spraying pesticides throughout the field. Such method not only requires huge quantities of herbicides but impact environment and humans health. One way to reduce the cost and environmental impact is to allocate the right doses of herbicide at the right place and at the right time (Precision Agriculture). Nowadays, Unmanned Aerial Vehicle (UAV) is becoming an interesting acquisition system for weeds localization and management due to its ability to obtain the images of the entire agricultural field with a very high spatial resolution and at low cost. Despite the important advances in UAV acquisition systems, automatic weeds detection remains a challenging problem because of its strong similarity with the crops. Recently Deep Learning approach has shown impressive results in different complex classification problem. However, this approach needs a certain amount of training data but, creating large agricultural datasets with pixel-level annotations by expert is an extremely time consuming task. In this paper, we propose a novel fully automatic learning method using Convolutional Neuronal Networks (CNNs) with unsupervised training dataset collection for weeds detection from UAV images. The proposed method consists in three main phases. First we automatically detect the crop lines and using them to identify the interline weeds. In the second phase, interline weeds are used to constitute the training dataset. Finally, we performed CNNs on this dataset to build a model able to detect the crop and weeds in the images. The results obtained are comparable to the traditional supervised training data labeling. The accuracy gaps are 1.5% in the spinach field and 6% in the bean field.

Because the application of antibiotic growth promoters (AGP) causes accelerated adverse effects on the animal diet, the scientific community has taken progressive steps to enhance sustainable animal productivity without using AGP in animal nutrition. Organic acids (OAs) are non-antibiotic feed additives and a promising feeding strategy in the swine and broiler industry. Mechanistically, OAs improve productivity through multiple and diverse pathways: (a) reduction of pathogenic bacteria in the gastrointestinal tract (GIT) by reducing the gut pH; (b) boosting the digestibility of nutrients by facilitating digestive enzyme secretion and increasing feed retention time in the gut system; (c) having a positive impact and preventing meat quality deterioration without leaving any chemical residues. Recent studies have reported the effectiveness of using encapsulated OAs and synergistic mechanisms of OAs combinations in swine and broiler productivity. On the other hand, the synergistic mechanisms of OAs and the optimal combination of OAs in the animal diet are not completely understood, and further intensive scientific explorations are needed. Moreover, the ultimate production parameters are not similar owing to the type of OAs, concentration level, growth phase, health status of animals, hygienic standards, and environmental factors. Thus, those factors need to be considered before implementing OAs in feeding practices. In conclusion, the current review evaluated the basics of OAs, mode of action, novel strategies to enhance utilization, influence on growth performances, nutrient digestibility, quality traits, and meat preservation of swine and broilers and their potential concerns regarding utilization.

Two experiments were conducted to develop a Nano green manganese and assess its effect on grapevines. The first experiment was microbiological, where several incorporation strategies were utilized to enrich the yeast with manganese, as follows: (1) adding manganese to the liquid medium (growth phase), (2) adding after 24 h of incubation (non-growth phase). As the results, growth phase reduced the possibility of medium contamination. Manganese concentration in the yeast cells was increased as that of manganese sulphate in the medium. Manganese incorporation in yeast cells was 99.93% higher than that of the medium at 0.0195 g/l of manganese. Although the concentration of manganese in the medium raised the OD of yeast cell biomass, manganese sulphate had no passive influence on it. The second experiment was horticultural, done on Flame Seedless grapevines, since both active fresh and frozen yeast enriched with manganese resulted from the first experiment were sprayed twice a year at 10 or 20 cm3/l comparing with manganese sulphate, and manganese chelate. The results demonstrated that yeast extracts in both forms increased the yield and improved fruit properties. The most effective treatment on vegetative growth, yield and fruit properties was the frozen yeast enriched with manganese at 20 cm3/l.

Background: We aimed to study the frequency, management, and outcomes of patients with blunt pancreatic trauma. Methods: We reviewed the medical records for all patients admitted with pancreatic injuries between 2011 and 2017 at the only level 1 trauma center in the country. Results: There were 71 patients admitted with pancreatic trauma (0.6% of trauma admissions and 3.4% of abdominal injury admissions) with a mean age of 31 years. Sixty-two patients had pancreatic injury grade I-II and 9 had grade III-IV. Thirty-eight percent had GCS <9 and 73% had ISS >16. The level of pancreatic enzymes was significantly proportional to the grade of injury. Over half of patients required a laparotomy, of them 12 patients had an intervention on the pancreas. Eight patients developed complications related to pancreatic injuries ranging from pancreatitis to pancreatico-cutaneous fistula while 35% developed hemorrhagic shock. Mortality was 31% and regardless of the grade of injury, the mortality was associated with high ISS, low GCS and presence of hemorrhagic shock. Conclusion: Pancreatic injuries following blunt trauma are rare and the injured subjects are usually young male. However, most injuries are of low-grade severity. This study shows that shock, higher ISS and lower GCS are associated with worse in-hospital out-comes. Non-operative management may suffice in patients with lower grade injuries, which may not be the case in patients with higher grade injuries unless carefully selected

: Based on fairness perspective, this paper combines the social vulnerability assessment of natural hazards with multi-objective site selection model to propose a new site selection planning model for central refuges. To begin with, the social vulnerability assessment system of regional natural disasters is founded through literature analysis, and the social vulnerability index of natural disasters is constructed; and based on the exponential differentiation of index to depict regional refuge demand, design vulnerability coverage function quantitive site selection fairness; then taking the shortest weighted evacuation distance, maximum vulnerability coverage and construction cost, the coverage population and refuge quantity as constraint conditions to construct multi-objective optimization model; finally, taking Zigong City, Sichuan Province as the object of empirical research, adapting NSGA-II algorithm to get the Pareto optimal solution set, and using TOPSIS method to get the optimal location scheme. The research results can provide a new method for the location layout of central refuge.

Rising fuel costs, significant air pollution, and the need to mitigate the negative consequences of oil consumption have diminished the relevance of traditional vehicles. This shift encourages the adoption of safer, more efficient, and eco-friendly transportation alternatives, such as fuel cell, electric, and hybrid vehicles. Brushless direct current motors are gaining popularity due to their high efficiency, power factor, torque, and controllability. By 2030, Brushless Direct Current motors are expected to replace conventional motors as the standard for power transfer, especially in dynamic applications like automobiles, more electric aircraft. This study explores a control technique to improve real-time control of brushless direct current motors in electric vehicles It presents speed control of these system for electric vehicle applications and an overview of electric vehicle technologies. A model for the 120-degree mode was developed using electrical and mechanical equations in MATLAB/Simulink. Three scenarios were examined to assess the potential of controlling brushless direct current motors using constant and dynamic speed and torque. The actual value reached the reference value in the first two scenarios.

This study examines the effect of a hyaluronic acid (HyAc) containing tricalcium phosphate putty scaffold material (TCP-P) and of a particulate tricalcium phosphate (TCP-G) graft on bone formation, volume stability and osteogenic marker expression in biopsies sampled 6 months after bilateral sinus floor augmentation (SFA) in 7 patients applying a split-mouth design. Biopsies were processed for immunohistochemical analysis of resin embedded sections. Sections were stained for collagen type I (Col I), alkaline phosphatase (ALP), osteocalcin (OC) and bone sialoprotein (BSP). Furthermore, the bone area and particle area fraction were determined histomorphometrically. Cone-beam CT data recorded after SFA and 6 month later were used for calculating the graft volume at these two time points. TCP-P displayed more advantageous surgical handling properties and a significantly greater bone area fraction and smaller particle area fraction. This was accompanied by significantly greater expression of Col I and BSP and in osteoblasts and osteoid and a less pronounced reduction in grafting volume with TCP-P. SFA using both types of materials resulted in formation of sufficient bone volume for facilitating stable dental implant placement with all dental implants having been in function without any complications for 6 years. Since TCP-P displayed superior surgical handling properties and greater bone formation than TCP-G, without the Hyac hydrogel matrix having any adverse effect on bone formation or graft volume stability, TCP-P can be regarded as excellent grafting material for SFA in a clinical setting.

In a bandsaw machine the blade guides provide additional stiffness and help to align the blade near the cutting region. Typically these are either in form of blocks made of carbide or ceramics or as sealed bearings. Abrasive particles, generated while cutting hard and brittle materials like natural stones, settle between the contact surfaces of the guides and the blade causing wear and premature failure. The hydrostatic guide system as presented in this work, is a contactless blade guiding method that uses force of several pressurized water jets to align the blade to the direction of the cut. For this investigation, cutting tests were performed on a marble block using a galvanic diamond coated bandsaw blade with the upper roller guides replaced by hydrostatic guides. The results show that the hydrostatic guides help to reduce the passive force while cutting to a constant near zero in contrast to the traditional guides. This also resulted in reduced surface roughness of the stone plates that were cut indicating a reduction in lateral vibration of the band. Additionally, it has also been shown that using hydrostatic guides the bandsaw blade can be tilted to counter the bandsaw drift opening opportunities for further research in active alignment control. This original research work has shown that the hydrostatic guide systems are capable of replacing and in fact perform better than state of the art bearing or block guides particularly for stone cutting applications.

The detection of SARS-Cov-2 in the sewage and water resources has increased the awareness among the people about the possibility survival of SARS-Cov-2 in the environment and the potential to transmit into the human through food chain or water resources. Moreover, the surface contaminated by the virus need to be disinfected frequently by using an effective disinfectant, the current chapter discussed the efficiency of the most traditional treatment process of the sewage and wastewater, and their role in the elimination of the virus as well as the sterility assurance level concept. Moreover, the chemical disinfectant used currently and their temporary efficiency has been reviewed.

One of the main families of antimicrobial peptides (AMPs) derived from the skin secretions of Hylidae frogs are dermaseptins. Among them, dermaseptin S4 (DS4) is characterized by its broad spectrum of activity against bacteria, protozoa and fungi. This study determined the physicochemical properties of the native peptide DS4(1-28) and its derivatives [DS4(1-28)a and DS4(1-26)a] isolated from the skin of the frog Phyllomedusa sauvagii and examined their antimicrobial properties against two marine pathogenic bacteria (Vibrio harveyi and V. anguillarum). The results indicate that DS4(1-26)a has high bacteriicdal activity against the tested strains and low hemolytic activity (&gt; 30 % lysis at the highest tested concentration of 100 µg mL-1) compared to the other two peptides. In addition, all three peptides affected the membrane and cell wall integrity of both pathogenic bacteria, causing leakage of cellular contents, with DS4(1-26)a having the most severe impact. These properties were corroborated by tansmission electron microscopy and by the variation of cations in their binding sites due to the effect of AMPs. These results suggest that DS4 and its derivatives, particularly the truncated and amidated peptide DS4(1-26)a, could potentially be effective in the treatment of infections caused by these marine pathogenic bacteria. Future experiments are required to validate the use of DS4 in vivo in the prevention of fish bacterial diseases.

The current study aims to fermentation parameter for producing microbial products. Microwave parameters consist on 245 MHz, and 600-watt for 60 seconds. Ethyl acetate was the best solvent used for extraction purposes. Antioxidant properties were differentiated by blocking the oxidation of the linoleic acid with an inhibition rate of 73.13% at a concentration of 200 mg/mL, in addition to increasing its effectiveness for free radical extraction and reduction strength by increasing concentrations gradually. The bond ability to irons was lower compared to the EDTA-2Na, in addition to the obtained total content corresponding to phenolic compounds in the ethyl acetate extract of fermented rice (Koji) by A. flavus was 232.11 mg, on the basis of galic acid/mg. The stability of the antioxidant compounds of the ethyl acetate extract of fermented rice (Koji) by A. flavus was also studied; showing stability under neutral conditions, as well as at high temperatures (185 °C during two hours). However, no stability was obtained under acidic and alkaline conditions.

Copper is a heavy metal used in many industries and known for its negative impacts on the environment and human’s health. A novel structured metal organic framework (MOF) was used for copper adsorption for this work. SEM, EDAX, XRD and FTIR were done to confirm the structure of MOF prepared. MOF of 0.05 gm was used to examine its ability in Cu+ 2 removals with different initial concentrations of Cu+2 and pH values (5, 7 and 9). The prepared MOF was able to achieve Cu removal with 94.6%, 93%, 91.5%, and 92.5 % for the initial concentrations of 5, 10, 15, and 20 ppm respectively. It also performed very well for pH 5 and 7 with average removal ranging from 93.9%-95% for pH 5 and 7 for the initial concentrations of 5, 10, and 15 respectively which indicate that the prepared MOF is of high ability in Cu+ 2 removal.

Background: Hereditary hematologic disorders (HHDs) originate from genetic factors that cause disruptions of blood homeostasis. The Thalassemia Unit, Najaf province, Iraq, keeps all medical records of all patients with HHD from the Najaf province. Objectives: We aimed to conduct an epidemiological study to obtain a comprehensive epidemiological picture with regard to sex distribution, and effects of blood groups and consanguinity. Patients and Methods: All registered HHD patients (until May 2019) in the Thalassemia Unit (1122 patients, aged 0.5-65 years old) were included in the study. Results: The prevalence of HHD in Najaf city is 75.6 per 100,000 population. The number of patients registered as new patients is increasing over the years. There are significantly more male than female HHD patients (Male=54.37%, Female=45.63%, p=0.023). The top 3 prevalent HHD are Major thalassemia (33.15%), intermediate thalassemia (31.91%), and Thalassemia+Sickle (12.65%). The highest percentage of patients were in the center of Najaf (56.42%) followed by Kufa, Mishkhab, Haidariah, Manathera, and Abbasiya. The distribution of blood groups and Rh factors of HHD patients in the Najaf population was not significantly different from that in the normal population. The consanguinity rate observed in our patients' parents (78.24%) was significantly higher (p<0.0001) as compared with the consanguinity rate in the population (45.8%). Conclusions: During the last few years, there was an increase in HHD cases in Najaf city and, therefore, there is an urgent need to increase awareness about the effects of consanguinity marriages on HHD in order to limit the incidence of HHD.

The emergence of novel coronavirus (SARS-CoV-2) in marked as the highest pathogenic coronavirus that has crossed from the hosts to the human population in the twenty-first century. The spreading of COVID-19 in different chinese cities and around the world is travel-related viral spread with the unprecedented nosocomial outbreaks. It has also shown with high case-fatality rates, indeed to urgent prophylactic and therapeutic settings. Scientific advancements of the SARS-CoV-2 pandemic allowed for rapid progress to understand the epidemiology and pathogenesis of SARS-CoV-2. This review highlights the the genomic structure of SARS-CoV-2 with the proposed roles of genotype and phenotype of SARS-CoV-2 in pathogenesis and discuss recent results supporting treatment strategies of COVID-19 with a special focus on how these new insights may facilitate rational development of SARS-CoV-2 for targeted therapies in the future.

The governance of public sector infrastructure projects became an important topic of interest in the project, programme and portfolio management literature during the last decade. Today, it is becoming a central focus for policymakers seeking to ensure success in selecting, designing and implementing government-sponsored programme of multi-projects. Due to the multiple underlying risks and complexities, the governance of infrastructure programme constitutes a critical element in strategic planning in developing countries. This paper has analyzed infrastructure development programme and revealed shortcomings in the areas of appraisal, decision-making, quality assurance and stakeholder management. Approaches to remedy these shortcomings have been proposed.

This scoping review comprehensively explores the existing literature on fenugreek (Trigonella foenum-graecum), a versatile herb known for its culinary and traditional medicinal uses. The review focuses on two key aspects: the hypoglycemic mechanism of fenugreek and its impact on milk production in breastfeeding women. By systematically analyzing and synthesizing the available evidence, this review aims to enhance our understanding of fenugreek's potential applications and identify research gaps for future systematic reviews. The search strategy targeted English-language animal studies published within the last five years that specifically investigated fenugreek's hypoglycemic mechanism and its effects on milk production. A total of 15,236 articles were initially identified from databases such as PubMed, Sci finder and ScienceDirect. After a rigorous selection process, including thorough evaluation of titles, abstracts, and full-texts, a subset of articles (including those titled "Impact of Fenugreek on Milk Production in Rodent Models of Lactation Challenge" and "Fenugreek Stimulates the Expression of Genes Involved in Milk Synthesis and Milk Flow through Modulation of Insulin/GH/IGF-1 Axis and Oxytocin Secretion") were included for detailed analysis. The findings 18 articles from the included studies demonstrate promising results regarding fenugreek's potential to stimulate milk production and regulate blood glucose levels. However, further research is necessary to unravel the underlying molecular pathways, establish optimal dosage guidelines, and assess long-term side effects. Overall, this scoping review offers valuable insights for lactating women seeking to enhance milk production and individuals managing blood sugar levels, providing potential alternative approaches for supporting lactation and glycemic control.

Synthetic materials such as Carbon, Kevlar, and Glass fibers are extensively utilized in various industries due to their superior characteristics including high stiffness, great strength, low den-sity, and high wear resistance, these advantages contributed to making them widespread in ap-plications like; aerospace, automobile, civil and electronics. This research is carried out to enhance the creep compliance of epoxy composite material by considering two types of fibers as reinforcement. A composite material is produced by combining two fibers, Kevlar fiber mixed with sika epoxy resin, along with Carbon fiber also mixed with sika epoxy resin using a Hand-Layup process. Experiments and numerical modeling are examined to offer a comprehensive understanding creep behavior of epoxy composite material in different weight ratios. Burger and Prony models are used to represent stress relaxation and creep strain of Visco-elastic material. According to the results, sika epoxy resin reinforced with Kevlar and Carbon fibers exhibits enhancement in the mechanical properties compared with pure epoxy. The use of Kev-lar/Sika epoxy composite results in higher creep compliance and modulus of elasticity compared with Carbon/Sika epoxy composite.

As V2X technology develops, acute problems related to reliable and secure information exchange between network objects in real time appear. The article aims to solve the scientific problem of building a network architecture for reliable delivery of correct and uncompromised data within the V2X concept to improve the safety of road users, using blockchain technology and mobile edge computing (MEC). The authors present a formalized mathematical model of the system, taking into account the interconnection of objects and V2X information channels, and an energy-efficient algorithm of traffic offloading to the MEC server. The paper presents the results of application of blockchain technologies and mobile edge computing in the developed system, their description, evaluation of advantages and disadvantages of the implementation.

VANET networks are a class of peer-to-peer wireless networks that are used to organize communication between cars (V2V), cars and infrastructure (V2I) and between cars and other types of nodes (V2X). These networks are based on the DSRC, 802.11 standards and are mainly intended for organizing the exchange of various types of messages, mainly emergency ones, to prevent road accidents or alert when road accident occur, or control the priority of the driveway. Initially it was assumed that cars would only interact with each other, but later, with the advent of the concept of Internet of things (IoT). Researchers began to analyze connectivity with other devices, which in general will allow to combine various road users and other devices that can used in the creation of intelligent transport infrastructure in a single smart city management system. Infrastructure is necessary for the provision of services, monitoring and management of the VANET network. As infrastructure objects it is proposed to use stationary objects of Roadside unit (RSU). The aim of this paper is to analyze the use of mobile edge computing to decrease the load to the base station and latency between RSU clouds and provide a real experiment using software defined networking and mobile edge computing for RSU.

Battery electric vehicles provide an opportunity to balance supply and demand in future power systems with high shares of fluctuating renewable energy. Compared to other storage systems such as pumped-storage hydroelectricity, electric vehicle energy demand is highly dependent on charging and connection choices of vehicle users. We present a model framework of a utility-based stock and flow model, a utility-based microsimulation of charging decisions, and an energy system model including respective interfaces to assess how the representation of battery electric vehicle charging affects energy system optimization results. We then apply the framework to a scenario study for controlled charging of nine million electric vehicles in Germany in 2030. Assuming a respective fleet power demand of 27 TWh, we analyze the difference between power-system-based and vehicle user-based charging decisions in two respective scenarios. Our results show that taking into account vehicle users’ charging and connection decisions significantly decreases the load shifting potential of controlled charging. The analysis of marginal values of equations and variables of the optimization problem yields valuable insights on the importance of specific constraints and optimization variables. In particular, state-of-charge assumptions and representing fast charging drive curtailment of renewable energy feed-in and required gas power plant flexibility. A detailed representation of fleet charge connection is less important. Peak load can be significantly reduced by 5% and 3% in both scenarios, respectively. Shifted load is very robust across sensitivity analyses while other model results such as curtailment are more sensitive to factors such as underlying data years. Analyzing the importance of increased BEV fleet battery availability for power systems with different weather and electricity demand characteristics should be further scrutinized.

Face milling is a well known commercial process highly used in heavy industries that consumes high amount of power. Besides power issue, modern manufacturing industries are aiming for per part cost reduction keeping the product quality unimpaired. Unexpectedly if the part is rejected in any stage of manufacturing, the cost of manufacturing dramatically increases. Major cause of part rejection is excessive tool wear that imparts poor surface profile or catastrophic tool failure that causes adherence of broken tool debris onto machined surface. Furthermore, the tool wear is associated with sliding distance (frictional distance) and the tool life quantifies the cost of tools. As such, from the perspective of manufacturing industries it is imperative to optimize the surface quality parameter, cost of part, power consumption, and material removal – this is exactly what is accomplished here. By this work, it is possible to conserve power consumption, produce parts with lower cost, manufacture with uncompromising surface quality and enhanced material removal rate. Moreover, as intermediate factors of interest, the influences of sliding distance, tool life and tool flank wear on the overall machining performance are evaluated. The multi-objective optimization by Grey Relational Analysis (GRA) revealed that for improved product performance and fast manufacturing (case 1) optimum results are: feed per tooth fz = 0.25 mm/tooth, cutting speed vc = 392.6 m/min and cutting length l = 0.5 mm; for resource conservation (case 2) the optimum results are: feed per tooth fz = 0.125 mm/tooth, cutting speed vc = 392.6 m/min, cutting length l = 0.5 mm.

Microencapsulation of polyherbal formulation (PHF) extract was carried out by freeze drying method, by employing gum arabic (GA), gelatin (GE), and maltodextrin (MD) with their designated different combinations as encapsulating wall materials. Antioxidant components (i.e total phenolic contents (TPC),Total flavonoids contents (TFC), and total condensed contents (TCT)), antioxidant activity (i.e. DPPH, β-carotene & ABTS⁺ assays), moisture contents, water activity (aw), solubility, hygroscopicity, glass transition temperature (T_g), particle size, morphology, in vitro alpha-amylase and alpha-glucosidase inhibition and bioavailability ratios of the powders were investigated. Amongst all encapsulated products, T_B (5% GA and 5% MD) and T_C (10% GA) has proven to be the best treatments with respect to the highest preservation of antioxidant components and their antioxidant potential by DPPH and β-carotene assays and noteworthy for an ABTS⁺ assays, in addition, the aforesaid treatments also demonstrated lower moisture content, aw, particle size and higher solubility, hygroscopicity and glass transition temperature (T_g). All freeze dried samples showed irregular (asymmetrical) microcrystalline structures. Furthermore, T_B and T_C also illustrated the highest in vitro anti-diabetic potential due to great potency for inhibiting alpha-amylase and alpha-glucosidase activities. In the perspective of bioavailability, T_A, T_B and T_C demonstrated the excellent bioavailability ratios (%).Futhermore, the phytochemo-profiling of ethanolic extract of PHF was also revealed to find out the bioactive compounds.

Integrated photovoltaic-fuel cell (IPVFC) systems, amongst other integrated energy generation methodologies are renewable and clean energy technologies that have received diverse research and development attentions over the last few decades due to their potential applications in a hydrogen economy. This article systematically updates the state-of-the-art of IPVFC systems and provides critical insights into the research and development gaps needed to be filled/addressed to advance these systems towards full commercialisation. The design methodologies, renewable energy-based microgrid and off-grid applications, energy management strategies, optimisations and the prospects as self-sustaining power source were covered. IPVFC systems could play an important role in the upcoming hydrogen economy since they depend on solar hydrogen which has almost zero emissions during operation. Highlighted herein are the progresses as well as the technical challenges requiring research efforts to solve to realise numerous potential applications of IPVFC systems such as in unmanned aerial vehicles, hybrid electric vehicles, agricultural applications, telecommunications, desalination, synthesis of ammonia, boats, buildings, and distributed microgrid applications.

Abstract: The empirical soil loss model, RUSLE, was used with a conjunction of remotely sensed data and geographic information system technology to delineate the soil erosion and watershed priorities in terms of conservation practices at seven boundary sub-watersheds (labeled as SW-00, SW-01, …, SW-06) between Iraq and Iran at Ali Al-Gharbi area, southern Iraq. The six factors of the RUSLE model, ie. the rainfall erosivity, the soil erodibility, the slope steepness length, the crop management, and management practice, were calculated or estimated using information from different data sources such as remotely sensed data and previous studies. The finding showed that the annual soil erosion loss ranges from 0 - 1890 (tons h-1 y-1) with an average of 0.66 (tons h-1 y-1). Values of soil erosion were classified into five classes: very low, low, moderate, high, and very high. The potential soil loss in the high and very high classes ranges from 14.84 to 1890 (tons h-1 y-1), and these classes occupy only 27 km2 of the study area, indicating that the soil loss is very low in the area being examined. In terms of the spatial distribution of soil loss, the northern and northeastern parts (mountains and hills) of the sub-watersheds where the slope is steeper are more likely to erode than the plain area in the southern and southeastern portions, indicating that slope, in addition to rainfall erosivity, has a dominant effect on the soil erosion rate. The study of soil erosion in the watersheds under consideration reveals that only the northern portions of the SW-00, SW-02, and SW-04 watersheds require high priority conservation plans; however, these portions are primarily located in mountain regions, making conservation plans implementation in these areas impractical. Due to low soil loss, other sub-watersheds, particularly SW-01, SW-03, SW-05, and SW-06, are given low priority.

MicroRNAs (miRNAs) are a class of small non-coding RNAs, which function as regulators of gene expression and contribute in numerous physiological processes. However, little is known referring to miRNAs function in insect chemosensation. In the current study, nine small RNA libraries were constructed and sequenced from the antennae of nymphs, adult males and females of Apolygus lucorum. In total, 399 miRNAs were identified including 275 known and 124 novel miRNAs. Known miRNAs were classified into 71 families, amongst which, 23 families were insect-specific. Expression profile analysis showed that miR-7-5p_1 was the most abundant miRNAs in the antennae of A. lucorum. Altogether, 69708 target genes related to biogenesis, membrane and binding activities were predicted for 399 miRNAs. Particularly, 15 miRNAs were found to target 16 olfactory genes. These miRNAs could be involved in regulation of olfactory-associated genes ex-pression. Comparing the antennae of nymphs, adult males and females, 94 miRNAs were found to be differentially expressed. The expression levels of some differentially expressed miRNAs measured by qPCR were consistent with sequencing results. This study provides a global miRNAs transcriptome in the antennae of A. lucorum and valuable information for further investigation on miRNA-mRNA interactions, especially the functions of miRNAs in regulating chemosensation.

Artificial roughness applied to the Solar Air Heater (SAH)’s absorber plate is a popular technique to increase its total-thermal efficiency (η_(t-th)). In this paper, the influence of geometrical parameters of V-down ribs attached below the corrugated absorbing plate of SAH on the η_(t-th) has been examined. The impacts of key roughness parameters, including relative pitch p⁄e (6-12), relative height e⁄D (0.019-0.043), angle of attack α (30°-75°), and Re (1000-20000), are examined under real weather conditions. The SAH η_(t-th) roughened by V-down ribs is predicted using an in-house developed conjugate heat transfer numerical model. It has been shown that the maximum SAH η_(t-th) is 78.8%, predicted under steady-state conditions of Re = 20000, solar irradiance G =1000 W/m2, p/e = 8, e/D = 0.043, and angle =60. That is 15.7% more efficient than that of the default smooth surface. Under real weather condition, the η_(t-th) of the roughened SAH with single and double glass covers are 17.7% and 20.1%, respectively, higher than those of smooth SAH.

Along with the economic growth, the companies must contribute to social progress and promote environmental sustainability in equal harmony. Sustainable human resource management (SHRM) strategies make it possible to attain the economic, social and environmental goals of a firm. In this regard, a survey method is discussed using the literature review and online questionnaire to identify the main factors/indicators during the SHRM evaluation of manufacturing firms in India. Uncertainty is commonly occurred in the assessment of SHRM factors. As a generalized version of fuzzy sets, single-valued neutrosophic set (SVNS) has been demonstrated as a valuable tool to illustrate the indeterminate, inconsistent and uncertain data of realistic decision-making problems. Considering the idea of SVNSs, this study develops a hybrid multi-criteria group decision-making (MCGDM) approach for assessing the SHRM of manufacturing firms under uncertainty settings. For this purpose, an SVN-alternative ranking order method accounting for two-step normalization (AROMAN) is proposed based on VIFI-score function-based decision experts’ (DEs’) weighting tool and integrated criteria weight-determining model to solve the MCGDM problems with fully unknown DEs and criteria weights. In this regard, we develop new SVN-distance measure to compute the degree of difference between SVNSs. Some examples are presented to demonstrate the efficacy of developed measure over the existing ones. In addition, new criteria weight-determination model is presented with the integration of objective weights through IVIF-distance measure-based model and subjective weights through ranking comparison (RANCOM) tool on SVNSs. The proposed ranking method is applied to an empirical study of SHRM assessment for manufacturing firms in India, which shows its applicability and feasibility. In this study, the evaluation criteria are characterized into social, environmental and economic aspects with DE’s opinions. Comparative and sensitivity analyses are made to show the strength and steadiness of presented approach. This study provides an innovative MCGDM analysis framework, which makes a significant contribution to the SHRM assessment problem under indeterminate, inconsistent and uncertain setting.

Cannabis, renowned for its historical medicinal use, harbours various bioactive compounds—cannabinoids, terpenes, and flavonoids. While major cannabinoids like THC and CBD have received extensive scrutiny for their pharmacological properties, emerging evidence underscores the collaborative interactions among these constituents, suggesting a collective therapeutic potential. This comprehensive review explores the intricate relationships and synergies between cannabinoids, terpenes, and flavonoids in cannabis. Cannabinoids, pivotal in cannabis's bioactivity, exhibit well-documented analgesic, anti-inflammatory, and neuroprotective effects. Terpenes, aromatic compounds imbuing distinct flavours, not only contribute to cannabis's sensory profile but also modulate cannabinoid effects through diverse molecular mechanisms. Flavonoids, another cannabis component, demonstrate anti-inflammatory, antioxidant, and neuroprotective properties, particularly relevant to neuroinflammation. The entourage hypothesis posits that combined cannabinoid, terpene, and flavonoid action yields synergistic or additive effects, surpassing individual compound efficacy. Recognizing the nuanced interactions is crucial for unravelling cannabis's complete therapeutic potential. Tailoring treatments based on the holistic composition of cannabis strains allows optimization of therapeutic outcomes while minimizing potential side effects. This review underscores the imperative to delve into the intricate roles of cannabinoids, terpenes, and flavonoids, offering promising prospects for innovative therapeutic interventions and advocating continued research to unlock cannabis's full therapeutic potential within the realm of natural plant-based medicine.

The aim of our study was to evaluate the impact of T. gondii status on eosinophils count (PNE), eosinophil to lymphocyte ratio (ELR) and eosinophil to neutrophil to lymphocytes ratio (ENLR) before and after can-nabis cessation in patients with psychiatric disorders. One hundred and eighty-eight patients were includ-ed in the study. T. gondii, PNE, ELR, ENLR, and urinary cannabis were measured at baseline and after 4 weeks of cannabis cessation. Highest PNE (p = .02), ELR (p = .03) and ENLR levels (p = .031) and highest increase of PNE (p = .044), and ENLR (p = .036) levels were found in patients after cannabis cessation only in the Toxo+ group. At four weeks, significant interactions between cannabis and T. gondii status for PNE (p = .038), and for ENLR (p = .043) levels were found, as well as for the evolution between baseline and 4 weeks for ENLR level (p = .049). After cannabis cessation, we found a positive correlation between negative symptoms and PNE levels at 4 weeks in the Toxo+ group. This study shows that the increase of inflammation after cannabis cessation might be modulated by T. gondii seropositivity status in patient after cannabis cessation.

Competition between cotton, winter, and summer crops is the greatest obstacle for plant breeders in Egypt. Breeders are thus seeking early maturing, high-yielding cultivars that are suited for planting following winter crops. This study was conducted during the 2016 and 2018 growing seasons at the Sakha agriculture research station, Egypt's agricultural research facility. This research used breeding material from the F2, F3, and F4 generations that resulted from crossing Giza 94 and Uzbekistan. During the 2016 growing season, the F2 population was cultivated, and the top 5% of the F2 population (75 plants) were chosen based on the selection criteria. In the summer of 2017, the F3 families were cultivated, and 5% of the superior F3 families were chosen to become the F4 fam-ilies, which were planted in the summer of 2018 at the single plant and bulk studies in a randomised full block design with three replications. The average performance of the characteristics boll weight, seed cotton yield, lint percentage, and lint index increased as generations passed from F2 to F4. In the meanwhile, the characteristic value of the first flower to open decreased, showing the accu-mulation of advantageous alleles. For all examined characteristics, the phenotypic coefficient of variance was greater than the genotypic coefficient of variation. In addition, the data demonstrated that heritability in a broad sense was greater in F4 populations than in F3 and F2 populations. With a few exceptions, the phenotypic and genotypic associations for all investigated characteristics were positive and very significant. According to the data, initial opening flowering and boll weight had a substantial impact on seed cotton output per feddan. In general, five superior families No. 9, 13, 18, 19, and 20 were chosen from the F4 population, which were more significant for yield and yield component than the commercial variety, and these genotypes may be promising for the breeding programme to develop new genotypes with superior yield.

Natural product especially secondary metabolites that produced by plants under the stressed condition shown to have a different pharmacological impact. Aeluropus lagopoides is one of the typical halophyte plants survivals under stressed conditions. It has been used for wound healing and as a painkiller. The bioactivity and the chemical composition of this plant have poorly investigated. Consequently, chemical components of A. lagopoides leaves were extracted using hexane (nonpolar), ethyl acetate (semi-polar), n-butanol (polar) to extract the most extensive variety of metabolites. The cytotoxicity and anticancer impact of extracted secondary metabolites evaluated against breast (MCF-7), colon (HCT-116), and liver (HepG2) cancer cell lines using SRB test. The mechanism of action verified by observing the appearance of apoptotic bodies using the fluorescent microscope while their antiproliferative impact had been evaluated using flow cytometer. Results revealed that secondary metabolites extracted using hexane and ethyl acetate were having the highest cytotoxicity and thus anticancer activity effect on HepG2 with IC₅₀ (24.29 ± 0.85, 11.22 ± 0.679 µg/mL) respectively. Where apoptotic bodies observed, flow cytometer results exhibited that secondary metabolites can inhibit cell cycle in G0/G1 phase. Accordingly, A. lagopoides hexane and ethyl acetate extracts may consider as a candidate anti-cancer drug.

Increased exposure to artificial light at night can affect human health including disruption of melatonin production and circadian rhythms and extend to increased risks of hormonal cancers and other serious diseases. In addition, multiple negative impacts on fauna and flora are well documented, and it is a matter of fact that artificial light at night is a nuisance for ground-based astronomy. These impacts are frequently linked to the colour of the light or more specifically to its spectral content. Artificial light at night is often mapped by using space borne sensors, but most of them are panchromatic and thus insensitive to the colour. In this paper, we suggest a method that allows high resolution mapping of the Artificial light at night by using ground-based measurements with the LANcube system. The device separates the light detected in four bands (Red, Green, Blue, and Clear) and provides this information for six faces of a cube. We found relationships between the LANcube’s colour ratios and 1- the Melatonin Suppression Index, 2- the StarLight Index and 3- the Induced Photosynthesis Index. We show how such relationships combined with data acquisition from a LANcube positioned on the top of a car can be used to produce spectral indices maps of a whole city in a few hours.

During the 1970s, Tunisian durum wheat landraces were replaced progressively by modern cultivars. These landraces are nowadays maintained by smallholder farmers in some ecological niches and are threatened gradually by extinction resulting on the narrowing of the genetic diversity. This study aims to investigate patterns of phenotypic variability using twelve quantitative traits in a panel of 189 durum wheat landraces and seven checks, based on farmer’s population name attribution and genetic structure. Our results showed high phenotypic variability among and within landraces and checks for the majority of the studied traits. The principal components analysis showed similar grouping using farmers name attribution and genetic structure using K = 6, which confirmed the identification of a new gene pool in the oases of Tunisia, represented by the sub-population Jenah Zarzoura and the robustness and high relationships between phenotypic and genome-wide genetic structure using DArTseq method. These findings will enhance the conservation efforts of these landraces and their use in breeding efforts at national and international levels to adapt to dry conditions.

Currently, life cannot be imagined without the use of bank cards for purchases or money transfers; however, their use provides new opportunities for money launders and terrorist organizations. This paper proposes a Blockchain-enabled transaction scanning (BTS) method for the detection of anomalous actions. The BTS method specifies the rules for outlier detection and rapid movements of funds, which restrict anomalous actions in transactions. The specified rules determine the specific patterns of malicious activities in the transactions. Furthermore, the rules of the BTS method scan the transaction history and provide a list of entities that receive money suspiciously. Finally, the Blockchain-enabled process is used to restrict the money laundering. To validate the performance of the proposed BTS, the Spring Boot application is built based on the Java programming language. Based on experimental results, the proposed BTS method automates the process of investigating transactions and restricts the money laundering incident.

This article's goal is to investigate the structural model that explains how awareness of consequences, subjective norms, attitude and behavior control variables influence plastic wastes behavioral intention in Jeddah's beaches, Saudi Arabia. A quantitative approach was employed. For data analysis, structural equation modeling was used. Based on the literature analysis, the study used a structured questionnaire. Multiple statistical analyses were used to examine the hypotheses. This study conducts a survey on a sample of 390 local tourists to investigate their intention to reduce plastic wastes. To increase the explaining power for behavioral intention, this study extended the TPB by adding awareness of consequences. The study's participants were selected randomly. 340 of them agreed and answered the questionnaire, yielding a percentage response rate 87%. This produced 271 valid questionnaires for data analysis after closely examining the survey. The results demonstrate a positive influence of subjective norms, perceived behavioral control, and consequences awareness on environmental behavioral intention. On the other hand, attitude does not significantly contribute to predict EBI. Governments, legislators, and researchers may use the work's findings to create and execute efficient waste management programs.

This research investigates the impact of oil price fluctuations on food prices in Saudi Arabia between 1979 and 2020 using Nonlinear Autoregressive Distributed Lags (NARDL) methodology. The study employs Augmented Dickey-Fuller (ADF) and Phillip Perron (PP) tests to determine the integration order of the variables and Bounds testing to confirm the existence of long-run cointegration relationships between each variable. The results indicate that oil shocks influence food prices through several mechanisms. Firstly, the cost of energy increases due to the rise in oil prices, affecting the agricultural commodity market, including farm equipment, food processing, packaging, and distribution costs. Secondly, the demand for agricultural commodities to produce biofuels affects food availability and, thus, food prices. Thirdly, as an oil-based economy, the oil price shock affects food prices through its impact on government spending, which affects aggregate demand and liquidity. Therefore, Saudi Arabia should adopt appropriate policies to mitigate the impact of oil price shocks on food prices, including investing in renewable energy sources, diversifying its economy, and improving food production and supply chain efficiency. Additionally, implementing appropriate fiscal policies to ensure sufficient budget allocation for food support programs is crucial. However, investing in groundwater exploration can contribute significantly to the development of Saudi agriculture and to gradually achieving food self-sufficiency.

Underwater Wireless Sensor Networks (UWSN) enables various oceanic applications which require effective packet transmission. In this case, sparse node distribution, dynamic network topology and inappropriate selection of relay nodes cause void holes. Addressing this problem, we present a Relay based Void Hole Prevention and Repair protocol (ReVOHPR) by multiple Autonomous Underwater Vehicles (AUV) for UWSN. ReVOHPR efficiently identifies and avoids void holes and trap relay nodes to avoid it. ReVOHPR adopts the following operations as Ocean Depth (levels) based Equal Cluster Formation, Dynamic Sleep Scheduling, Virtual Graph based Routing, and Relay Assisted Void Hole Repair. For energy efficient cluster forming, Entropy based Eligibility Ranking (E2R) is presented which elects stable cluster heads (CHs). Then, dynamic sleep scheduling is implemented Dynamic Kernel Kalman Filter (DK2F) algorithm in which Sleep and Active modes based on the nodes current status. Inter Cluster Routing is performed by maximum matching nodes which selects by Dual criteria and also data transmitted to AUV. Finally, void holes are detected and repair by Bi-Criteria Mayfly Optimization (BiCMO) algorithm. The BiCMO focuses on reducing the number of holes, data packet loss and maximizes Quality of Service (QoS) and energy efficiency of the networks. This protocol is timely deal with node failures in packet transmission via multi-hop routing. Simulation is implemented by NS3 (AquaSim module) simulator that evaluates the performance in network simulation for following metrics as average energy consumption, delay, packet delivery rate and throughput.

Coronavirus (COVID19) appears to be an inflection point that is forcing a disruption in medical education. However, it is not clear what the responses of the institutions are to this pandemic and how the adaptation of new methods may impact medical education in the post COVID-19 era. Objective: The study aims to explore how medical schools in Egypt responded to COVID-19 pandemic regarding the teaching and learning/assessment for undergraduate students. Design: A mixed method exploratory two-phase study was conducted. A survey was prepared and disseminated to a convenient non-probability sample of the medical school faculty through various social platforms. Then, a focus group guide was conducted to explore in more depth the findings. Results: The staff level of preparedness for that unexpected shift was evaluated by 55.1% of the survey participants as optimum to high and a good leadership support was reported by 70 % of them. They reported conflicting views about the proper role of medical education units but reinforced the idea of Egyptian Knowledge Bank’s crucial role in this transition. Additionally, there is a communication problem with the students that leads to their detachment. Subsequently, 84.6 % of the participants reported that their schools used alternative teaching methods for small groups, large groups, pre-clinical and clinical clerkships. However, 64.1 % of the participants identified a clinical skills teaching challenge. Although, 68.4% reported that alternative methods were used for formative assessment but absence of alternative methods for summative assessment was declared by 76.3%. Conclusions: Individuals moved faster than bodies and relied on support existing outside the universities when catastrophe happened. However, institutes which have experience in adapting modern engaging learning methods should organize a better response for crisis. Online learning should be integrated in the curriculum with a fair percentage especially in the early years of medical study.

Hydrogel-based wearable electrochemical biosensors (HWEBs) are emerging biomedical devices that have recently received immense interest. The exceptional properties of HWEBs include excellent biocompatibility with hydrophilic nature, high porosity, tailorable permeability, the capability of reliable and accurate detection of disease biomarkers, suitable device-human interface, facile adjustability, and stimuli-responsive to the nanofiller materials. Although the biomimetic three-dimensional hydrogels can immobilize bioreceptors, such as enzymes and aptamers, without any loss in their activities. However, most HWEBs suffer from low mechanical strength and electrical conductivity. Many studies have been performed on emerging electroactive nanofillers, including biomacromolecules, carbon-based materials, and inorganic and organic nanomaterials, to tackle these issues. Non-conductive hydrogels and even conductive hydrogels may be modified by nanofillers as well as redox species. All these modifications have led to the design and development of efficient nanocomposites as electrochemical biosensors. In this review, both conductive-based and non-conductive-based hydrogels derived from natural and synthetic polymers are systematically reviewed. The main synthesis methods and characterization techniques are addressed. The mechanical properties and electrochemical behavior of HWEBs are discussed in detail. Finally, the prospects and potential applications of HWEBs in biosensing, healthcare monitoring, and clinical diagnostics are highlighted.

Background: Millions of people worldwide suffer from a genetic hemoglobinopathy known as sickle cell disease (SCD). It is a long-term condition marked by progressive multiorgan failure. Among SCD patients, cardiovascular complications are the main leading cause of death. Cardiovascular complication raises cardiac markers level as well as sickle cell vaso-occlusive crisis (VOC). This makes it challenging to determine the source. Methods: This research aims to identify the association between cardiac markers and myocardial infarction in SCD patients At King Abdulaziz University (KAUH) in Jeddah, Saudi Arabia. This retrospective study was conducted from June 2022 to March 2023. All patients with SCD who were 18 years and above were enrolled. Cardiac markers' associations with age, emergency room visits, ECG, blood transfusion, hydroxyurea, anticoagulants, and mortality were analyzed. Result: 537 patient records were screened during the study period, of which 270 met the inclusion criteria. Among these, 144 (53.3%) were female. The prevalence of elevated LDH, troponin, and CK-MB among the SCD patients who visited ER for the VOC was 78.5%, 9.3%, and 6.3%, respectively. Overall, there was a significant relationship between the cardiac marker level and the number of ER visits, age and mortality (p= 0.01), but there was no significant association between the cardiac marker level and for each of the following: hydroxyurea use, antiplatelet/anticoagulant use, needing of blood transfusion and ECG abnormalities. This retrospective research shed light on the significance of cardiac marker levels in patients with SCD. The level of cardiac markers was remarkably linked with age, frequency of ER visits, and patients' states.

The leaf essential oils from five Eucalyptus spp.: E. astringens, E. camaldulensis, E. lehmanii, E. leucoxylon and E. sideroxylon growing in the same plantation area and conditions (plants with the same age and subjected to the same agronomic practices) were analyzed and evaluated for their antimicrobial activity. The essential oil yields ranged from 0.14 to 0.96% (w/w), and their chromatographic profiles were resolved into 48 compounds; among them, 11 were common to all essential oils. Terpenoids (oxygenated mono, and sesquiterpenes) dominated (55.66-76.67%) the oil profiles. Although 1,8-cineole (21.97-50.93%) was found as the main oxygenated monoterpene in all examined essential oils, principal component analysis observed and confirmed an interspecific chemical variability. Additionally, a set of distinctive chemical markers that could serve as a reliable tool for discrimination of Eucalyptus species and for authentication and quality control purposes (for commercial samples) has been defined for each essential oil. The antimicrobial disc-diffusion assay results revealed that all essential oils were endowed with a strong antimicrobial activity, with those derived from E. camaldulensis, E. lehmanii and E. leucoxylon being the most active.

Dataspaces are decentralized and open ecosystems that guarantee trustworthy and secure sharing of data among their participants. In recent years, dataspaces have gained popularity due to their design for managing and sharing heterogeneous data from various sources and domains; and their capability to incrementally solve data integration issues. Leveraging dataspace and advanced technologies plays a vital role in solving many real-world applications effectively and efficiently in real-time. Drone technology is one type of technology that can be deployed to gather data from different resources in harsh or smart environments. Beyond fifth-generation (B5G) communication networks significantly contribute to drones’ development and widespread use by providing low latency and high throughput. Therefore, data sharing among drones in B5G networks offer significant potential to enhance commercial and civilian applications. However, several security issues for collaboration and data sharing, such as data privacy leakage, because of sensitive data and the lack of trustworthy centralized monitoring. Furthermore, sharing data is one of the essential requirements for drone collaboration to achieve their tasks effectively and efficiently in real-time. This conceptual framework presents a novel dataspace in the sky, focusing on securing drone data sharing in B5G for Industry 4.0 toward Industry 5.0. We present how Federated Learning (FL) assists drones in collaboration effectively and efficiently, sharing models instead of raw data. However, because of the fragility of the central curator, the reliability of contribution recording, and the poor quality of shared local models, there are still significant security and privacy issues for drone-assisted smart environments in B5G. Therefore, we present the conceptual framework for leveraging blockchain and FL to secure and manage data sharing of collaborative drones’ dataspace in space in a decentralized fashion. The decentralisation of dataspaces would significantly expand the drive and market for the development of citizen-friendly mobility services.

IoT is a new communication paradigm that gains a very high importance in the past few years. This communication paradigm supports various heterogeneous applications in many fields and with the dramatic increase of the number of sensor devices, it becomes a demand. Designing IoT networks faces many challenges that include security, massive traffic, high availability, high reliability and energy constraints. Thus, new communication technologies and paradigms should be deployed for IoT networks to overcome these challenges and achieve high system performance. Distributed computing techniques (e.g. fog and MEC), software defined networking (SDN), network virtualization and blockchain are common recent paradigms that should be deployed for IoT networks, either combined or individually, to achieve the main requirements of the IoT networks at a high system performance. Fog computing is a form of edge computing that has been developed to provide the computing capabilities (e.g. storage and processing) at the edge of the access network. Employing Fog computing in IoT networks, as an intermediate layer between IoT devices and the remote cloud, becomes a demand to make use of the edge computing benefits. In this work, we provide a framework for the IoT system structure that employs an edge computing layer of Fog nodes controlled and managed by SDN network with the blockchain technology to achieve a high level of security for latency sensitive IoT applications. The proposed system employs SDN network with distributed controllers and distributed OpenFlow switches; these switches are enabled with limited computing and processing capabilities. Furthermore, a data offloading algorithm is developed to allocate different processing and computing tasks to the distributed OpenFlow switches with available resources. Moreover, a traffic model is proposed to model and analyze the traffic among different parts of the network. The proposed work achieves various benefits to the IoT network, such as the latency reduction, security improvement and high efficiency of resources utilization. The proposed algorithm is simulated and also the proposed system is experimentally tested over a developed testbed to validate the proposed structure. Experimental results show that the proposed system achieves higher efficiency in terms of latency, security and resource utilization.

There is an urgent demand worldwide for the development of highly selective adsorbents and sensors of heavy metal ions and other organic pollutants. Within these environmental and public health frameworks, we are combining the salient features of clays and chelatant polymers to design selective metal ion adsorbents. Towards this end, the ion imprinting approach has been used to develop a novel nanohybrid material for the selective separation of Cu2+ ions in aqueous solution. The Cu2+-imprinted polymer/ montmorillonite nanocomposite (IIP/Mt) and non-imprinted polymer/montmorillonite nanocomposite (NIP/Mt) were prepared by radical photopolymerization process in the visible light. Ion imprinting was indeed important as the recognition of copper ions by IIP/Mt was significantly superior to that of NIP/Mt that is the nanocomposite synthesized in the same way but in the absence of Cu2+ ions. The adsorption process as batch study was investigated under the experimental condition affecting same parameters such as contact time, concentration of ions metals and pH. The adsorption capacity of Cu2+ ions is maximized at pH 5. Removal of Cu2+ ion achieved equilibrium within 15 minutes; the results obtained were found to be fitted by the pseudo-second order kinetics model. The equilibrium process was well described by the Langmuir isothermal model and the maximum adsorption capacity was found to be 23.6 mg/g.

Objectives: Human herpes viruses can cause life-threatening diseases in immunocompromised children, especially leukemic patients. Therefore, the aim of this study is to detect the human herpes viruses (HHV1-7) and to investigate its clinical significance in Middle Eastern Pediatric Leukemia Patients by using 2 Independent PCR assays. Methods: Detection of human herpes virus DNA has been done in blood samples of 200 pediatric leukemia patients in addition to 90 blood donors as a control group using multiplex PCR assays. When a ‘‘positive’’ result was observed, real-time PCR was performed to measure the viral load. Results: The most frequent herpes virus infection in Middle Eastern Pediatric Leukemia cases was CMV, followed by EBV, then HHV6, VZV, HHV7, HSV1, and HSV2, where they were 92/200 (46%), 76/200 (38%), 72/200 (36%), 48/200 (24%), 12/200 (6%), 8/200 (4%), and 2/200 (1%) respectively. Also, there was a statistically significance difference between leukemic patients and their controls regarding CMV, EBV, HHV6, and VZV (P <0.05). Correlation between percentage of co-infection, and clinical parameters for the 7 herpes viruses has been studied, and there is an increase in absolute neutrophilic count (ANC), total leukocyte count (TLC) and duration of fever and neutropenia in age group 6-11 years for HHV6/CMV, then in age group 12-18 years especially for EBV/CMV and CMV/HHV6. Also, our results show that multiplex PCR assay is close to single PCR assay in relation to specificity and sensitivity which in turn prove its validity for early diagnosis of herpes viral infection. Conclusions: Adopting multiplex PCR technique is helpful in screening of virus infections. It will save time, effort, cost effective and will assist in rapid diagnosis. However, the clinical relevance of the virus infection needs to be evaluated by quantitative real-time PCR which in turn will help patient's management by using appropriate antiviral treatment.

This study examines the complex relation among environmental taxes, productive capacities, urbanization, and their collective effects on environmental quality in Africa, drawing on two decades of data from twenty African countries. It situates the study within the broader discourse on sustainable development and economic growth, emphasizing the Environmental Kuznets Curve (EKC) framework to examine the relationship between economic development, characterized by urban expansion and increased productive capacities, and the adoption of environmental taxes amidst the continent’s diverse economic and environmental environments. Using advanced econometric techniques, including the Cross-Section Augmented Autoregressive Distributed Lag (CS-ARDL) model and the Dynamic Common Correlated Effects Mean Group (DCCEMG) estimator, the study addresses data challenges such as cross-sectional dependence and slope heterogeneity. The results provide important insights into the dynamics of environmental quality in relation to economic and urban growth and the role of environmental taxation. The study proposes tailored policy strategies aimed at strengthening sustainable development initiatives in line with international agreements such as the Paris Agreement and the Sustainable Development Goals. These strategies advocate for a nuanced application of environmental taxes and the promotion of productive capacities to enhance environmental sustainability across the African continent.

Background & Aims: Gut microbial imbalances are linked to colorectal cancer (CRC), but archae-‎a's role remains underexplored. Here, we performed bioinformatic and statistical analysis looking ‎for archaeal taxonomic and functional signatures related to CRC. Methods: We analyzed pub-‎lished fecal metagenomic data from 390 subjects, comparing the archaeomes of CRC and healthy ‎individuals. We conducted a biostatistical analysis to investigate the relationship between Candi-‎datus Mancarchaeum acidiphilum (DPANN superphylum) and other archaeal species associated ‎with CRC. Using the Prokka tool, we annotated the data focusing on archaeal genes, subsequently ‎linking them to CRC and mapping them against UniprotKB and GO databases for specific ar-‎chaeal gene functions. Results: Our analysis identified enrichment of methanogenic archaea in ‎healthy subjects, with an exception for Methanobrevibacter smithii, which correlated with CRC. ‎Notably, CRC showed a strong association with archaeal species, particularly Natrinema sp. J7-2, ‎Ferroglobus placidus, and Candidatus Mancarchaeum acidiphilum. Furthermore, the DPANN ar-‎chaeon exhibited a significant correlation with other CRC-associated archaea (p < 0.001). Func-‎tionally, we found a marked association between MvhB-type polyferredoxin and colorectal can-‎cer. We also highlighted the association of archaeal proteins involved in the biosynthesis of leucine ‎and the galactose metabolism process with the healthy phenotype. Conclusion: The archaeomes ‎of CRC patients show identifiable alterations, including a decline in methanogens and an increase ‎in Halobacteria species. MvhB-type polyferredoxin, linked with CRC and species like Candidatus ‎Mancarchaeum acidiphilum, Natrinema sp. J7-2 and Ferroglobus placidus emerge as potential archaeal ‎biomarkers. Archaeal proteins may also offer gut protection, underscoring archaea’s role in CRC ‎dynamics.

In videos, the human's actions are of three-dimensional (3D) signals. These videos investigate the spatiotemporal knowledge of human behavior. The promising ability is investigated using 3D convolution neural networks (CNNs). The 3D CNNs have not yet achieved high output for their well-established two-dimensional (2D) equivalents in still photographs. Board 3D Convolutional Memory and Spatiotemporal fusion face training difficulty preventing 3D CNN from accomplishing remarkable evaluation. In this paper, we implement Hybrid Deep Learning Architecture that combines STIP and 3D CNN features to enhance the performance of 3D videos effectively. After implementation, the more detailed and deeper charting for training in each circle of space-time fusion. The training model further enhances the results after handling complicated evaluations of models. The video classification model is used in this implemented model. Intelligent 3D Network Protocol for Multimedia Data Classification using Deep Learning is introduced to further understand space-time association in human endeavors. In the implementation of the result, the well-known dataset, i.e., UCF101 to, evaluates the performance of the proposed hybrid technique. The results beat the proposed hybrid technique that substantially beats the initial 3D CNNs. The results are compared with state-of-the-art frameworks from literature for action recognition on UCF101 with an accuracy of 95%.

Pruning is an important part in controlling the branching, good fruit size, and prodctivity of fruit trees. and consequently, ‘Valencia’ orange trees were grown many years ago, the trees were suffering from a decline in productivity in the newly reclaimed lands after certain years of plantation. This study elucidated the effect of pruning severity on growth, yield and fruit quality of ‘Valencia’ orange trees. Four levels of pruning were applied on 35 years old ‘Valencia’ orange trees as follows: T1: Control (un-pruned), T2: Light pruning ( 25% of main branches were removed); T3: Moderate pruning (50% of main branches were removed) and T4: Heavy pruning: 75% of main branches were removed. The treatments were done in February 15th (for each season). The results indicated that pruning severity increased vegetative growth paraments such as shoot length and leaf area and decreased canopy volume of Valencia orange trees in comparison to control. Maximum yield was gained from 75% followed by 50% and 25% pruning severity treatment. The pruning treatments improve in fruit weight, size, firmness, juice content, TSS%, TSS/acid ratio and vitamin C content. In addition, pruning produced an increasing in fruit yield per tree as well as yield increasing %. Hence, it might be concluded that pruning at different severity applied in February can be used effectively on ‘Valencia’ orange trees to improve vegetative growth, fruit physical and chemical properties. Besides, increasing fruit yield by nearly 20% in comparison to control.

Nonlinear loads, a crucial component of power systems grids, pose a challenge due to harmonics injection. Our research tackles this issue with a novel approach - a modified green plug / switched filter compensation scheme using fuzzy logic controllers. This innovative scheme, presented in the paper, utilizes dual action pulse width modulation to ensure switching functions from harmonic reduction and capacitive compensation for inrush nonlinear type AC loads.  The scheme's multi-loop regulations and online switching effectively handle dynamic type slow acting inrush, motorized and other rectifier type-nonlinear loads, enhancing power factor, power quality at source and load buses, and reducing total harmonic distortion at key source and sensitive nonlinear load buses. A simulation model in the MATLAB/SIMULINK software environment demonstrates the efficiency of the proposed FACTS technique. The results show that voltage, current, active power, reactive power, power factor regulation, and effective energy utilization are achievable with the designed FACTS-MFCC-SFC. The switched modulated AC green plug filter significantly improves power quality and enhances power factor in the case of inrush and nonlinear loads.