In this study, the olive pomace was considered because of its importance in the environment. So, this study carried out to estimate the total nitrogen content and the fatty acids profile of olive pomace. The olive pomace samples were collected from Irbid, Jarash, Ajloun and Mafraq during the harvesting season 2014 to study the biochemical characteristics of fatty acid composition and the total nitrogen (TN) content. The total nitrogen content was determined by standard Kjeldahl method and the fatty acid profile was detected by gas chromatography (GC). The results show that the total nitrogen content ranged from (0.39 ± 0.0) to (0.62 ± 0.02) with statistically significant difference suggesting that the composition of matrices and their percentage may be responsible for composition of amendments. The calculated total protein percentage ranged between (2.43 ± 0.00) to (3.87 ± 0.17). Also, 13 different fatty acids were quantitatively profiled and quantitated. Oleic acid (C 18:1) was found to be the highest percentage of all other fatty acids and ranged between (59.03%) and (63.81%), moreover the C 18:1/C 18:2 (oil quality) was calculated and C.V% showed variation meaning that nutritional implication could affect the oxidative stability of oils. In conclusion, OP by-product could give a sustainable and alternative-cheap source for fertilizers, pharmaceutical industries, cosmetics and other industries.

BACKGROUND G6PD deficiency is an inherited an X-linked recessive condition leading to insufficient levels of glucose-6-phosphate dehydrogenase, thus causing hemolytic anaemia under certain conditions. METHODS Our study is explorative for cases admitted to Jordan University Hospital. The studied parameters include demographics, clinical manifestations, biochemical markers including Hb level, WBC count, liver enzymes, and blood grouping. RESULTS Most of the patients were admitted to the emergency unit (53.13%). Individuals who were Rh-positive represented 57.81%, while patients of AB blood group accounted for 75%. The mean values were 4.81 years (age), 29.06 hours (time-to-hospital admission), 38.10 degree Celsius (temperature), 6.11 gm/dl (Hb), 13242.19 (WBC count), 343.20 U/L (S. ALP), and 50.98 IU/L (S. ALT). There was no significant difference between males and females or between favism-induced versus drug-induced hemolytic episodes. AB and Rh positive blood groups are of protective effect in relation to liver enzymes. Patients who were admitted to the hospital within 24 hours from having clinical manifestations had a better prognosis. CONCLUSION This study is the first inferential research on G6PD deficiency from the Middle East to explore cases from one of the largest healthcare centres in Jordan. The role of blood grouping should be investigated prospectively.

Background: Despite their generally favorable prognosis, hepatic fibrosis remains a possible complication for hepatitis B virus (HBV) inactive carriers. This study aimed to estimate the prevalence of significant fibrosis and associated risk factors among Omani HBV inactive carriers. Methods: A retrospective study was conducted of 200 Omani HBV inactive carriers visiting a tertiary hospital in Muscat, Oman, between January 2017 and December 2018. Significant fibrosis (stage F2 or higher) was identified using two-dimensional shear-wave elastography. Baseline clinical, laboratory, and radiological data were analyzed to determine associations. Results: Of the total sample, 106 patients (53%) were male, and the mean age was 44.6 ± 9.3 years. The prevalence of significant fibrosis was 20% (n = 40). Male gender (p = 0.007), age ≥60 years (p = 0.024), and fatty changes in liver ultrasound (p = 0.044) were found to be independent factors for significant fibrosis. Conclusion: the prevalence of significant fibrosis was relatively high among a sample of Omani HBV inactive carriers, with several sociodemographic and clinical risk factors identified. Periodic assessment of liver function is needed for patients with these risk factors; moreover, routine biochemical parameters could be useful predictors of disease prognosis. Further research is recommended to substantiate these findings.

Background: Bacterial conjunctivitis is one of the most commonly encountered eye complications in medicine, particularly in developing nations. In Hadhramout Governorate-Yemen, there is no data about bacterial conjunctivitis among patients. Aim: The present study aimed to determine the prevalence rate of bacterial conjunctivitis among patients seeking hospitals in Hadhramout Governorate, Yemen. Methods: A total of 1722 eye swabs were collected from patients attending different Hadhramout hospitals over a period of April to December 2018. The isolation and identification of bacteria are performed using standard bacteriological procedures. In addition, structured questionnaires were used to gather data from patients. Results: Out of 1722 eye swabs, 198 (11.49%) were positive for bacterial conjunctivitis, while 1524 (88.5%) were negative. The high prevalence rate of infection was among female participants and the age group between 31 and 40 years, at 15.25% and 29.29%, respectively. In addition, the prevalence of gram-positive bacteria was significantly greater among study patients than gram-negative bacteria (58.59% vs. 41.41%). The most predominant Gram-positive bacteria were Staphylococcus aureus (26.26%), followed by Streptococci pneumoniae (17.18%), Alpha-hemolytic Streptococci (8.08%), and Staphylococcus epidermidis (7.07%). Whereas the gram-negative bacteria were Pseudomonas aeruginosa (12.1%), followed by Moraxella catarrhalis (10.1%), Haemophilus influenza (7.07%), Klebsiella sp. (6.06%), Enterobacter agglomerans (4.04%), and Neisseria gonorrhoeae (2.02%). Additionally, the majority of study patients suffered from red eyes (100%), tearing eyes (93.93%), itching (90.9%), painful eyes (87.87%), purulent eyes (56.56%), and eye discharge (38.38%). Conclusion: The prevalence rate of bacterial conjunctivitis among patients in Hadhramout, Yemen, is relatively low compared with international investigations. Further investigation is required to assess and identify the antibiotic resistance to these agents that cause conjunctivitis.

The rapid evolution of technology has given rise to a connected world, where billions of devices interact seamlessly, forming what is known as the Internet of Things (IoT). While IoT offers incredible convenience and efficiency, it presents a significant challenge in cybersecurity and is characterized by various power, capacity, and computational process limitations. Machine learning techniques are employed within Intrusion Detection Systems (IDS) to enhance their capabilities in identifying and responding to security threats. The key features selected to improve IDS efficiency and reduce dataset size, thereby decreasing the time required for attack detection, are drawn from the extensive network dataset. This paper introduces an enhanced feature selection method designed to reduce the computational overhead on IoT resources while simultaneously strengthening intrusion detection capabilities within the IoT environment. Experimental results based on the InSDN dataset demonstrate that our proposed methodology achieves the highest accuracy with the fewest number of features and low computational cost. Specifically, we attain a 99.99% accuracy with 11 features and a computational time of 0.8599 seconds.

New corrosion inhibitor derived from coumarin-3-amine namely 3-((2-chlorobenzylidene)amino)coumarin was synthesized and characterized by CHN elemental analysis in addition to Fourier transform infrared and nuclear magnetic resonance techniques. The anti-corrosion ability of 3-((2-chlorobenzylidene)amino)coumarin to inhibit the impacts of corrosion has been demonstrated and damage reduction of the mild steel also. 3-((2-chlorobenzylidene)amino)coumarin, has been employed as a good corrosion inhibitor for mild steel in HCL solution. The efficiency of the inhibition was figured according to weight loss method and it was 74.6%.

Corrosion inhibitors are the natural or synthetic compounds that have the ability to inhibit the average of corrosion and reduce the damage of the mild steel. Enormous organic inhibitors nowadays employed in the corrosion domain but excluded due to costly. Comparatively cheap, and stable organic compound, namely 3-((4-nitrobenzylidene)amino)coumarin, have been utilized as an excellent corrosion inhibitor in hydrochloric acid for mild steel. The inhibition efficiency has been figured regarding to weight loss method. The corrosion inhibitor was identified according to spectroscopic techniques namely Fourier transform infrared and nuclear magnetic resonance in addition to micro-elemental analysis. Inhibition efficiency for the studied inhibitor was 71.4% that, at the highest studied concentration.

Annually, more than 1.5 million preventable new hepatitis B (HBV) infections continue to occur, with an estimated global burden of 296 million individuals living with chronic hepatitis B infection. This substantial health challenge results in over 820,000 annual deaths attributed to complications such as liver cirrhosis and hepatocellular carcinoma (HCC). HBV vaccination remains the cornerstone of public health policy to prevent chronic hepatitis B and its related complications. It serves as a crucial element in the global effort to eliminate HBV, as established by the World Health Organization (WHO), with an ambitious 90% vaccination target by 2030. However, reports on global birth dose coverage reveal substantial variability, with an overall coverage rate of only 46%. This comprehensive review thoroughly examines global trends in HBV vaccination coverage, investigating the profound impact of vaccination on HBV prevalence and its consequences across diverse populations, including both high-risk and general demographics. Additionally, the review addresses the formidable challenges and facilitating factors essential for achieving WHO's HBV vaccination coverage objectives and elimination strategies in the coming decade and beyond.

The inhibition impacts of 1,10-Phenanthroline-5,6-diamine (PTDA) on mild steel in 1 M HCl solution were investigated through weight loss method. The inhibition efficiencies of PTDA increase with increase in PTDA concentration at the temperature 303. Weight loss method indicate that PTDA is an excellent inhibitor the inhibition efficiency of 81.5% at the maximum PTDA concentration of 0.5 g/L at the temperature 303K.

This study tries to focusing on applying information communication technology for economic importance of Mid Oil Company (MDOC), which is among contemporary oil companies in Iraq. Since ICT forms a significant aspect of achieving organizational economic objectives, most of public and private bodies seek to utilize ICT tool and techniques to improve work efficiencies. The emerging growth in ICT has made it process and service automation possible in managing organizational activities. To determine this effect of ICT on organizations, this study formulated statistical research model at MDOC through using fifteen questionnaires, which were distributed on three axes. The outcome of the questionnaire analysis revealed that there is inadequate comprehensive infrastructure to suitably support ICT within the selected organization management. In addition, it revealed that there are no ideal standards to maintain and sustain internet networks. Based on these revelations, the study presents recommendation for the adoption of ICT with the aim of minimizing cost, enhancing communication and managing infrastructure. Also recommends the need to support IT department within an organization, with essential equipment, in terms of man and machine, for better efficiency to employ the key of ICT Impact in Iraqi governmental oil companies.

The global increase of road infrastructure and its impact on the environment requires serious attention to develop sustainable and environmentally friendly road materials. One group of those materials is produced by using bitumen emulsion. However, there are still scientific and technical obstacles standing against its regular application. The bitumen emulsion formulation process and compositional optimization are subjected to a high number of degrees of freedom. Consequently, obtaining the desired product is mostly based on a series of random and tedious trials because of the enormous number of tests to be carried out. The current review of the physicochemical formulation may indeed be extensively used in helping to reduce the number of unnecessary experimentations as well as discuss the vital aspects in the bitumen emulsion production process. Among these, emulsion stability, viscosity, droplet size (and distribution), bitumen emulsion chemistry, the function of the emulsion components, surfactant type, acids or alkalis, and additives are all discussed and used to define the emulsion's physical properties and reactivity. Besides, current developments in the mechanisms of breaking and setting processes are also summarized. It is discussed how emulsions are graded based on their reactivity, particle charge, and physical features. Two emulsification techniques are outlined namely the colloid mill method and the High Internal Phase Ratio (HIPR) method. Furthermore, some emulsion formulation tools/theories were identified and are explained. In that way, optimized formulations can be used to offer a practical guide for bitumen emulsion manufacturers when trying to formulate a well-defined bitumen emulsion for its use in pavement infrastructure rather than simply to meet standard specifications. This review paper aims to enable the ultimate potential of the bitumen emulsion in the field of cold recycling technology by further following up the research progress of bitumen emulsion manufacturing, therefore, this paper reviews and discusses the literature available up to now on this topic, in road engineering and emulsion chemistry.

Background: Physical activity (PA) has paramount importance for achieving good health and an active lifestyle among university students. Quality physical education (QPE) program ensures the attainment of sustainability in PA. Motivation can be considered a critical factor in promoting PA in students. However, motivation alone cannot bring inclusivity unless quality aspects are not being incorporated thoughtfully into physical education (PE) programs. Aims: As such this study aimed at examining three research questions: i) do the motive of PA participation can be enhanced through the quality provision of PE programs in university settings ii) does the quality provision of PE help promote sustainable PA among adolescents? and iii) whether or not this carry-over process is influenced by gender. Methods: This cross-sectional study recruited N = 610 (male = 467) & female = 143) university students. Students who studied PE as one of their course subjects were only included in this study. They participated in > 27 different sports and had a mean age of 20.76 (SD = 3.47) years and a mean of 4.70 (SD = 4.93) years of athletic experience. Descriptive (mean, SD) statistics, Pearson’s correlation, and regression analysis were used to meet the objectives. To examine the variables’ differences in gender, data were then computed using a 2 (Gender) by 2 (Type of Sport: Individual vs. Team) MANCOVA, with the covariate being age. Results: The factors provided sound reliability scores and highlighted positive correlations between QPE and exercise needs satisfaction. However, the factors lacked establishing correlations with PA. The perceived competence for exercise needs satisfaction reported differences in sexes, with the male being scored higher. Furthermore, QPE did not show any significant differences in gender. In comparison to females, males showed higher mean scores in the PA. Conclusion: The provision of QPE is identified as a pivotal factor in determining the competence of exercise satisfaction among students. QPE provision was adequate in the university, however, it could not promote PA among females as expected.

Zinc oxide (ZnO) nanoparticles (NPs) were synthesized using Rosmarinus officinalis leaf extract at 80 ° C (ZnO-80) and 180 ° C (ZnO-180). The biosynthesized ZnO NPs were characterized and their photocatalytic activity was evaluated for the degradation of methylene blue (MB) and crystal violet (CV) under sunlight irradiation. The results of the characterizations by XRD, TEM and SEM showed that the size of the NPs of ZnO-80 was smaller than that of ZnO-180 which exhibited flakier agglomerated spherical structures. Photocatalytic tests showed ZnO-80 which was prepared by a cheap and easy procedure compared to ZnO-180 effectively degrades MB and CV dyes under sunlight. The superior performance of ZnO-80 over ZnO-180 can be explained by the differences in their textural properties. This is because ZnO-80 has a smaller crystallite size, a specific surface area and a higher pore volume than ZnO-180. Fourier-transform infrared spectroscopy (FTIR) analyzes revealed that both samples contained an adsorbed carboxylate group (COO-), and accordingly a mechanism was proposed for the formation of ZnO NPs that include the carboxyl group.

Glucose-6-phosphatase (G6Pase), an enzyme found mostly in the kidneys and the liver, acting significant role of supplying glucose through starvation. This study includes (84) subjects, their age ranged from (40 to 54) years. (20) subjects were healthy chosen as control group and (64) patients with type 2 diabetes mellitus were divided into three groups according to their type of anti diabetic therapy : (23) newly diagnosed group without therapy (Group1), (20) with metformin therapy (Group2) and (21) with metformin plus glibenclamide therapies( Group3). The study found that G-6-Pase activity is increased, thereby leading to an increase in endogenous glucose production (EGP) in patients with type 2 diabetes and, therefore FPG will increase. The result found that increasing G-6-Pase activity will increase the concentration of glucose in the blood and that will increase the long-term glycemic control (HbA1c%).

Major depressive disorder (MDD) is associated with changes in the levels of the cations calcium (Ca) and magnesium (Mg) as well as circulating pro- and anti-inflammatory cytokines. The immune-inflammatory nature of MDD has encouraged researchers to use anti-inflammatory drugs as an adjuvant treatment for MDD. However, the effect of this treatment on cation levels has not been studied. The present study examined a) differences in both cations between drug-naïve MDD patients and controls, and b) the effects of a combination of sertraline and ketoprofen, an anti-inflammatory drug, on Ca and Mg (both total and ionized). In the same patients we also examined the associations between both cations and IL-1β, IL-4, IL-6, IL-18, IFN-γ, TGF-β1, zinc and indoleamine 2,3-dioxygenase (IDO). Clinical improvement was estimated using the Beck Depression Inventory-II (BDI-II) at baseline and after follow up for two months. Serum Ca and Mg (total and ionized) were significantly lower in MDD patients as compared with controls, while treatment significantly increased calcium but decreased magnesium levels. There were significant and inverse correlations between the BDI-II scores from baseline to endpoint and Ca (both total and ionized), but not Mg, levels. The effects of calcium on the BDI-II score remained significant after considering the effects of zinc, IDO and an immune activation z unit weighted composite score based on the sum of all cytokines. There was a significant and inverse association between this immune activation index and calcium levels from baseline to endpoint. In conclusion, reduced levels of both cations play a role in the pathophysiology of major depression. Increased calcium levels are coupled to the clinical efficacy of antidepressants and attenuation of immune activation. The suppressant effect of antidepressants on Mg levels may be a side effect of those drugs. New antidepressant treatments should be developed that increase the levels both Ca and Mg.

There is now evidence that major depression is accompanied by lowered serum zinc, an immune-inflammatory biomarker. However, the effect of anti-inflammatory drugs as adjuvant to antidepressants on serum zinc and copper in relation to pro- and anti-inflammatory cytokines are not studied. The aim of the present work is to examine the effects of treatment with sertraline with and without ketoprofen on serum levels of zinc and copper in association with immune-inflammatory biomarkers in drug-naïve major depressed patients. We measured serum zinc and copper, interleukin (IL)-1β, IL-4, IL-6, IL-18, interferon (IFN)-γ, and transforming growth factor (TGF)-β1 in 40 controls and 133 depressed patients. The clinical efficacy of the treatment was measured using the Beck Depression Inventory-II (BDI-II) at baseline and 8 weeks later. In drug-naïve major depressed patients we found significantly reduced baseline levels of serum zinc and copper in association with upregulation of all cytokines, indicating activation of the immune-inflammatory responses system (IRS) as well as the compensatory immune regulatory system (CIRS). Treatment with sertraline significantly increased zinc and decreased copper levels, while ketoprofen did not have a significant add-on effect on zinc but attenuated the suppressant effects of sertraline on copper levels. During treatment, there was a significant inverse association between serum zinc and activation of the IRS/CIRS. The improvement in the BDI-II during treatment was significantly associated with increments in serum zinc coupled with attenuation of the IRS/CIRS. In conclusion, lower serum zinc is a hallmark of depression, while increments in serum zinc and attenuation of the immune-inflammatory response during treatment appear to play a role in the clinical efficacy of sertraline. Intertwined changes in zinc levels and the immune response play a role in the pathophysiology of major depression and participate in the mechanisms underpinning the clinical efficacy of antidepressants.

BACKGROUND Epidemiological sciences have been evolving at an exponential rate paralleled only by the comparable growth within the discipline of data science. Digital epidemiological studies are playing a vital role in medical science analytics for the past few decades. To date, there are no published attempts at deploying the use of real-time analytics in connection with the disciplines of Dentistry or Medicine. AIMS AND OBJECTIVES We deployed a real-time statistical analysis in connection with topics in Dental Anatomy and Dental Pathology represented by the maxillary sinus, posterior maxillary teeth, related oral pathology. The purpose is to infer the digital epidemiology based on a continuous stream of raw data retrieved from Google Trends database. MATERIALS AND METHODS Statistical analysis was carried out via Microsoft Excel 2016 and SPSS version 24. Google Trends database was used to retrieve data for digital epidemiology. Real-time analytics and the statistical inference were based on encoding a programming script using Python high-level programming language. A systematic review of the literature was carried out via PubMed-NCBI, the Cochrane Library, and Elsevier databases. RESULTS The comprehensive review of databases of the literature, based on specific keywords search, yielded 491813 published studies. These were distributed as 488884 (PubMed-NCBI), 1611 (the Cochrane Library), and 1318 (Elsevier). However, there was no single study attempting real-time analytics. Nevertheless, we succeeded in achieving an automated real-time stream of data accompanied by a statistical inference based on data extrapolated from Google Trends. CONCLUSION Real-time analytics are of considerable impact when implemented in biological and life sciences as they will tremendously reduce the required resources for research. Predictive analytics, based on artificial neural networks and machine learning algorithms, can be the next step to be deployed in continuation of the real-time systems to prognosticate changes in the temporal trends and the digital epidemiology of phenomena of interest.

Keywords: Innovation ecosystems, Economic sustainability, Hydrocarbon-based economies, Economic diversification, Qualitative approach

Recently Cold Bitumen Emulsion (CBE) mixture technologies have been developed to lower the pavement construction temperatures to reduce the environmental costs and control the gas emissions. Due to its poor early mechanical strength, active fillers (i.e. cement) have been used to obtain high early stiffness in order to have the potential for timely construction of the next layer. There is, however, a lack of understanding about the impact of active fillers nature on viscoelastic behaviour and fatigue damage resistance of CBE mastics. This study, therefore, aims to identify the influence of active fillers on the rheological properties and the resulted fatigue behaviour of CBE mastic, supported by chemical analysis for the filler-bitumen emulsion. For this aim, bitumen emulsion was mixed separately with seven fillers/blended fillers to prepare the CBE mastics. Various experiments include continuous pH monitoring tests (chemical reactivity of filler-bitumen emulsion), Strain sweep (SS) tests, Temperature-Frequency Sweep (TFS) tests, Time Sweep (TS) tests, and Linear Amplitude Sweep (LAS) tests were conducted on the CBE binder and the prepared mastics. Results show that the rheological performance and the fatigue damage resistance is not only dependent on the filler inclusions, but it significantly relies on filler type and chemistry. Based on that, the raise in complex shear modulus and the decrease in viscous components were associated with a significant enhancement in fatigue performance for specific filler.

Due to the increase in the emission of greenhouse gases, the hydrologic cycle is being altered on the daily basis. This has affected the variations in relations of intensity, duration, and frequency of rainfall events. Intensity Duration Frequency (IDF) curves describe the relationship between rainfall intensity, rainfall duration and return period. IDF curves are one of the most often applied implements in water resource engineering, in areas such as for operating, planning and designing of water resource projects, or for numerous engineering projects aimed at controlling floods. In particular, IDF curves for precipitation answer problems of improper drainage systems or conditions and extreme characters of precipitation which are the main cause of floods in Nyabugogo catchment. This study aims to establish Rainfall IDF empirical equations, curves and hydrological discharge (predicted peak rate of runoff (Qlogy)) equations for eight Districts that will be used for designing an appropriate and sustainable hydraulic structures for controlling flood to reduce potential loss of human and aquatic life, degradation of water, air and soil quality and property damage and economic lessen caused by flood in Nyabugogo catchment. However Goodness of Fit tests revealed that Gumbel’s Extreme-Value Distribution method appears to have the most appropriate fit compared with Pearson type III distribution for validating the Intensity-Duration-Frequency curves and equations through the use of daily annual for each meteorological station. The findings of the study show that the intensity of rainfall increases with a decrease in rainfall duration. Additionally, a rainfall of every known duration will have a higher intensity if its return period is high, while the predicted peak rate of runoff (Qlogy) increases also with an increase in the intensity of rainfall.

Quality of Experience (QoE) metrics can be used to assess user perception and satisfaction in data services applications delivered over the Internet. End-to-end metrics are formed because QoE is dependent on both the users’ perception and the service used. Traditionally, network optimization has focused on improving network properties such as the QoS. In this paper we examine the Adaptive streaming over a software defined network environment. We aimed to evaluate and study the media streams, aspects affecting the stream, and network. This was done to eventually reach a stage of analysing the network’s features and their direct relationship with the perceived QoE. We then use machine learning to build a prediction model based on subjective user experiments. This will help to eliminate future physical experiments and automate the process of predicting QoE.

The research presented in this paper examines a new proposed approach for identifying safety improvement sites on rural highways. Unlike conventional approaches, the proposed approach does not require crash history, but rather utilizes classified variables for traffic volume, geometric features, and roadside characteristics that do not require access to exact data or extensive technical expertise. The research validates the performance of the proposed approach using field data from a large sample of rural two-lane highway segments in the state of Oregon including traffic, roadway, and crash data. Using observed crash history as a reference, the performance of the proposed ap-proach was compared to two of the well-established methods in practice, namely: the Empirical Bayes (EB) and the Potential for Safety Improvement (PSI) methods. The study results suggest that, using crash density for highway segments, the performance of the proposed method was lower than that of the EB and PSI methods. This is despite the high R-square value of the predictive model used in the proposed method. However, when using crash frequencies for highway segments, the per-formance of the proposed method was found comparable to the well-established EB and PSI methods.

Background: Papillomaviruses (PVs) are double-stranded DNA viruses and are more common in skin of ruminants in Iraq. A P53 (tumor suppressor protein) reveals an essential role in cell cycle control. This study aimed to describe the clinical, histopathological and immunohistochemical aspects of naturally occurring cutaneous ruminant’s papillomatosis. Methods: Samples were collected from totally, 10 animals (3 cattle, 3 goats and 4 sheep) with multiple papillomatosis lesions. Results: Clinically, exophytic multiple, cauliflower-like growths (warts) of varying sizes (0.5-11 cm) were found in different areas of the animal’s bodies. Histopathological features were various degrees of koilocytosis, ortho and parakeratotic, hyperkeratosis, hypergranulosis in granular layer and acanthosis. Immunohistochemical (IHC) investigations revealed some nuclei in the granular and basal layers of the epidermis with intense positivity for papillomavirus antigen. All tumor samples were positive for p53 expression that appeared as a strong cytoplasmic and perinuclear staining mainly in the basal and parabasal layers. Conclusion: this study described the papillomavirus lesions in bovine, ovine and caprine, that located in different anatomical areas with minor variations in histopathological features. The tumor samples showed positive results for PV antigen and P53 expression that considered as the useful markers in the diagnosis of cutaneous papilloma.

Major Depression Disorder (MDD) is accompanied by an immune response characterized by increased levels of pro-inflammatory and immune-regulatory cytokines and cytokine-induced stimulation of indoleamine-2,3-dioxygenase (IDO). There is also some evidence that anti-inflammatory drugs may have a clinical efficacy in MDD.The aim of this study is to examine the clinical effects of an eight-week combinatorial treatment of ketoprofen (a nonsteroidal anti-inflammatory drug) combined or not with sertraline, on serum levels of IDO, interferon (IFN)-γ, interleukin (IL)-4 and transforming growth factor (TGF)-β1 in association with changes in the Beck-Depression Inventory-II (BDI-II). The study included 140 MDD patients and 40 normal controls. The pre-treatment serum levels of IDO, IFN-γ, TGF-β1 and IL-4 were significantly higher in MDD patients compared with the control group. Treatment with sertraline with or without ketoprofen significantly reduced the increased baseline production of all 4 biomarkers to levels which were similar as those of normal controls. Ketoprofen add-on had a significantly greater effect on IDO and BDI-II as compared with placebo. The reductions in IDO, IL-4 and TGF-β1 during treatment were significantly associated with those in the BDI-II.In conclusion, the clinical efficacy of both sertraline + ketoprofen may be ascribed at least in part to attenuated IDO levels and immune-inflammatory responses in MDD. Moreover, add-on treatment with ketoprofen may augment the efficacy of sertraline by attenuating IDO. However, these treatments may also significantly reduce the more beneficial properties of T helper-2 and T regulatory (Treg) immune subsets. Future research should develop immune treatments that target the immune-inflammatory response in MDD, while enhancing the compensatory immune-regulatory system (CIRS).

Additive manufacturing (AM) offers customization of microstructure and mechanical properties of fabricated components according to the material selected, and process parameters applied. Selective laser melting (SLM) is the commonly used technique for processing high strength aluminum alloys. Selection of SLM process parameters could control the microstructure of parts and their mechanical properties. However, the process parameters limit and defects obtained inside the as-built parts present obstacles to customized part production. This study investigates the influence of SLM process parameters on the quality of as-built Al6061 and AlSi10Mg parts according to the mutual connection between the microstructure characteristics and mechanical properties. The microstructure of both materials was characterized for different parts processed over a wide range of SLM process parameters. The optimized SLM parameters were investigated to eliminate the internal microstructure defects. The behaviour of mechanical properties of parts was presented through regression models generated from the design of experiment (DOE) analysis for the results of hardness, ultimate tensile strength, and yield strength. A comparison between the results obtained and that reported in the literature is presented to illustrate the influence of process parameters, build environment, and powder characteristics on the quality of parts produced. The results obtained from this study could help to customize the part’s quality by satisfying their design requirements in addition to reducing the as-built defects which in turn reduce the amount of the post-processing needed.

This paper proposes a new method for network screening on rural low-volume roads. These roads are important as they provide critical access to agricultural land and tourist attractions. Most low-volume roads belong to the lowest functional class (local rural roads) and thus are built to lower design standards. The conventional hot spot network screening techniques may not be appropriate for low-volume roads due to the sporadic nature of crashes occurring on these roads. Contrarily sophisticated network screening approaches require extensive roadway and traffic data that are often unavailable to local agencies for lack of resources, and/or lack of technical expertise. This research attempts to address these obstacles in low-volume roads network screening which aims to identify candidate sites for safety improvements. The research used an extensive low-volume road sample from the state of Oregon and the Empirical Bayes expected number of crashes in developing the proposed models for network screening. The proposed models do not require exact measurement of roadway geometric features as all geometric variables were classified into categories that are easy to compile by local agencies. Further, the method could be used with and without traffic data, without compromising the effectiveness of the network screening process.

In this project, four of fibers Bragg gratings were fabricated by injecting different volumes of liquids (star line Glass Mechanix optical adhesive material, olive oil diluted with ethanol) into the hollow core fiber. The amplitude splitting interferometric technique with a high resolution specially designed translation stage was used for the fabrication process. The fabrication was done using ultraviolet laser operated at wavelength 405nm. The fabricated Bragg length of the four fibers is equal to 3.8 cm. The results presented fiber Bragg grating (FBG) with successful fabrication at 653.3 nm Bragg reflected wavelength.

Aluminum base alloys containing chromium (Cr) and zinc (Zn) were produced using extrusion and heat treated powder metallurgy. Cr addition ranged between 5 to 10 wt. % while Zn was added in an amount between 0 to 20 wt. %. Heat treatment processes were performed during powder metallurgy process at different temperatures followed by water quenching. Similar alloys were extruded, with an extrusion ratio of 4.6 to get proper densification. Optical microscopy was used for microstructure investigations of the produced alloys. The element distribution microstructure study was carried out using the Energy Dispersive X-ray analysis method. Hardness and tensile properties of the investigated alloys have been examined. Wear resistance tests were carried out and the results were compared with these of the Al-based bulk alloys. Results showed that the aluminum base alloys containing 10wt. % Chromium and heat treated at 500°C for one hour followed by water quenching exhibited the highest wear resistance and better mechanical properties.

(1) Background: Work creativity, manifested in innovative workplace behaviour (IWB) and employee work engagement, is fundamental to maintain firms’ sustainability and competitiveness. In this regard, this study aims at investigating the supporting effect of innovative leadership on IWB and employee engagement through maximising employee vigour, dedication and absorption. (2) Methods: The study data were collected from questionnaires administered to 150 respondents working in mobile phone companies in southern and central Iraq. The statistical analyses were conducted through the Statistical Package for the Social Sciences (SPSS) and Smart PLS. In analysing the measurement model and testing the proposed hypotheses, the study results revealed that inclusive leadership and work engagement were intimately connected to IWB; (3) Results: Work engagement played a mediating role between inclusive leadership and IWB. The questionnaire data indicated that inclusive leadership behaviours, such as openness, accessibility and availability, motivated the subordinates to be engaged in IWB.; and (4) Conclusions: To promote IWB, company leaders then need to effectively engage their followers by taking pride and satisfaction in employee output, which might aid employee workplace and IWB engagement.

Additive manufacturing (AM) provides customization of the microstructure and mechanical properties of components. Selective laser melting (SLM) is the commonly used technique for processing high strength Aluminum alloys. Selection of SLM process parameters could control the microstructure of fabricated parts and their mechanical properties. However, process parameter limits and defects inside the as-built parts present obstacles to customized part production. This study is the second part of a comprehensive work that investigates the influence of SLM process parameters on the quality of as-built Al6061 and AlSi10Mg parts. The microstructure of both materials was characterized for different parts processed over a wide range of SLM process parameters. The optimized SLM parameters were investigated to eliminate the internal microstructure defects. Mechanical properties of the parts were illustrated by regression models generated with design of experiment (DOE) analysis. The results reported in this study were compared to previous studies, illustrating how the process parameters and powder characteristics could affect the quality of produced parts.

Innovation is rapidly growing and affecting various industries, including hydrocarbon processing. This study aims to conduct a comprehensive and organized review of the literature on innovation ecosystems and their performance. It will examine existing definitions of innovation ecosystems and related concepts and identify metrics and indicators for measuring innovation and entrepreneurial ecosystems. The term "innovation ecosystem" has gained considerable attention from scholars and practitioners over the past fifteen years. Despite the proliferation of research in this area, there are concerns about its fragmented knowledge base. While previous reviews have highlighted the theoretical connections between innovation ecosystems and related concepts, there is still a need for a more comprehensive understanding of the current state of innovation ecosystem research. The study used a systematic literature review approach that combines bibliographic coupling and content analysis methods, drawing on over 100 studies to identify five streams of current innovation ecosystem research: technology innovation, platform innovation ecosystems, regional development, innovation ecosystem conceptualization and theorization, and entrepreneurship and innovation. The study's contribution lies in decoding the intellectual structure of current innovation ecosystem research and providing targeted recommendations for future research.

Purpose: To evaluate the efficacy and survival rates of same session ab interno trabeculectomy with the trabectome and Ahmed glaucoma valve implant (AT) in comparison to the Ahmed glaucoma valve alone (A). Method: A total of 107 eyes undergoing primary glaucoma surgery were enrolled in this retrospective comparative case series, including 48 eyes which underwent AT and 59 eyes which received A alone. Participants were identified using the procedural terminology codes, and their medical records were reviewed. The primary outcome measure was surgical success, defined as intraocular pressure (IOP) > 5 mmHg, ≤ 21 mmHg, and IOP reduction ≥ 20% from baseline at two consecutive visits after three months, no reoperation for glaucoma. Secondary outcome measures were IOP, the number of glaucoma medications, incidence of a hypertensive phase, and best corrected visual acuity (BCVA). Results: The cumulative probability of success at one year was 70% in AT, and 65% in A (p=0.85). IOP decreased significantly from 26.6 ± 10.1 mmHg at baseline to 14.7 ± 3.3 mmHg at the final follow-up in AT (p= 0.001). The corresponding numbers for A were 28.8 ± 10.2 and 16.7 ± 4.9, respectively (p= 0.001). The final IOP was significantly lower in AT (p= 0.022). The number of medications at baseline was comparable in both groups (2.6 ± 1.2 in AT and 2.5 ± 1.3 in A, p=0.851). Corresponding number at 1 year visit was 1.2±2 in AT and 2.8±1.8 in A (p=0.001). The incidence of a hypertensive phase was 18.7% in AT and 35.5% in A (p=0.05). HP resolved in only 30% of eyes. The criteria for HP resolution were fulfilled in 9 eyes (30%). There was no difference in the rate of resolution of the hypertensive phase between AT and A (33.3% and 28.5%, respectively, p=0.67). Conclusion: Ahmed glaucoma valve implant with same session trabectome surgery significantly decreased the rate of the hypertensive phase and postoperative IOP as well as the number of glaucoma medications.

The emergence of decentralized finance (DeFi) signifies a fundamental change in the financial sector, utilizing blockchain technology to revolutionize conventional financial structures. This study aims to investigate the development, underlying principles, and practical applications of DeFi while analyzing the regulatory factors, upcoming patterns, and policy consequences. This study employs a thorough research methodology encompassing a literature review and case studies to examine the fundamental elements, uses, and instances of success in DeFi. It emphasizes the potential for transformation and the obstacles it faces. The study identified legal ambiguity, difficulties in achieving scale, and constraints related to compliance as primary concerns for policymakers. The fundamental discoveries encompass the pivotal function of blockchain technology in facilitating DeFi platforms, the tangible implementations of DeFi in lending, borrowing, and trading, and the necessity for clear regulations and global cooperation. The policy implications encompass the significance of maintaining a balance between innovation and compliance, promoting international collaboration, and prioritizing consumer protection measures. In summary, this study enhances our comprehension of the emergence of DeFi and its consequences for conventional finance. It offers valuable insights for policymakers, industry participants, and scholars in effectively navigating the changing realm of decentralized finance.

Background: We aimed to study the frequency, management, and outcomes of patients with blunt pancreatic trauma. Methods: We reviewed the medical records for all patients admitted with pancreatic injuries between 2011 and 2017 at the only level 1 trauma center in the country. Results: There were 71 patients admitted with pancreatic trauma (0.6% of trauma admissions and 3.4% of abdominal injury admissions) with a mean age of 31 years. Sixty-two patients had pancreatic injury grade I-II and 9 had grade III-IV. Thirty-eight percent had GCS <9 and 73% had ISS >16. The level of pancreatic enzymes was significantly proportional to the grade of injury. Over half of patients required a laparotomy, of them 12 patients had an intervention on the pancreas. Eight patients developed complications related to pancreatic injuries ranging from pancreatitis to pancreatico-cutaneous fistula while 35% developed hemorrhagic shock. Mortality was 31% and regardless of the grade of injury, the mortality was associated with high ISS, low GCS and presence of hemorrhagic shock. Conclusion: Pancreatic injuries following blunt trauma are rare and the injured subjects are usually young male. However, most injuries are of low-grade severity. This study shows that shock, higher ISS and lower GCS are associated with worse in-hospital out-comes. Non-operative management may suffice in patients with lower grade injuries, which may not be the case in patients with higher grade injuries unless carefully selected

This paper presents the design and implementation of a multichannel bio-impedance spectroscopy system on field programmable gate arrays (FPGA). The proposed system is capable of acquiring multiple signals from multiple bio-impedance sensors, process the data on the FPGA and store the final data in the on-board Memory. The system employs the Digital Automatic Balance Bridge (DABB) method to acquire data from biosensors. The DABB measures initial data of a known impedance to extrapolate the value of the impedance for the device under test. This method offers a simpler design because the balancing of the circuit is done digitally in the FPGA rather than using an external circuit. Calculations of the impedance values for the device under test were done in the processor. The final data is sent to an onboard Flash Memory to be stored for later access. The control unit handles the interfacing and the scheduling between these different modules (Processor, Flash Memory) as well as interfacing to multiple Balance Bridge and multiple biosensors. The system has been simulated successfully and has comparable performance to other FPGA based solutions. The system has a robust design that is capable of handling and interfacing input from multiple biosensors. Data processing and storage is also performed with minimal resources on the FPGA.

The aim of this paper is to analyze the five grand parks in Dubai, United Arab Emirates (UAE) and provide a geoprocessing approach to different aspects such as sport, health, leisure, recreation, and public wellbeing. The study uses a hybrid of qualitative and quantitative approach as methodology. Sustainability offerings, accessibility for people of determination and special needs, typology and the geolocations of the grand parks plays crucial role in residents’ wellbeing. The paper concludes with recommendations for Dubai government to design new and innovative approaches to manage wellbeing of urban public places into the leisure environment for residents.

Automotive aerodynamics comprises of the study of aerodynamics of road vehicles. Its main goals are reducing drag, minimizing noise emission, improving fuel economy, preventing undesired lift forces and minimizing other causes of aerodynamic instability at high speeds. The Ahmed body has the form of a highly simplified car, consisting of a blunt nose with rounded edges fixed onto a box-like middle section and a rear end that has an upper slanted surface, the angle of which can be varied. It retains vital features of real vehicles in order to study the flow fields around it and the related turbulence models which characterizes the actual flow at elevated Reynolds number. In the present study, the aerodynamic behavior of this body is investigated numerically by the aid of commercial CFD tool: Ansys Fluent. The results of the simulation are validated with available experimental data and results of the simulations from other literatures. The numerical data were obtained for a fixed free stream velocity of 25 m/s at the inlet. The simulations were performed at a fixed slant angle of 25 degree and zero yaw angle. The present study focuses on how local refinement of mesh inside the concerned body and the outside, helps affect the results and for which grid dependency test is the primary objective of this paper. The present study also helps demonstrate how the drag of the body behaves, which is mainly the effect of pressure drag force generated at the rear portion of the body. The study also focuses on important properties like the velocity magnitude at different locations for different meshing cases, and to capture the flow pattern in the front or near the wake region. The study can be further helpful to future researchers in determining resistance, fuel efficiency etc. helping designers to optimize in specialized areas for better efficiency.

This study investigated dry reforming of methane with combined catalysts supported on γ-Al2O3 support doped with 3.0 wt. % TiO2. The physicochemical properties of all the catalysts were determined by inductively-coupled plasma/mass spectrometry metal analysis, nitrogen physisorption, X-ray diffraction, temperature programmed reduction/desorption, thermogravimetric analysis, and scanning electron microscopy. The addition of CeO2 and MgO to Ni strengthened the interaction between the Ni and the support. The catalytic activity results indicated that the CeO2 and MgO addition to Ni did not do much in retarding carbon deposition, but they improved the activity of the catalysts. Among the tested catalysts, it was found that the catalyst with the composition of 5.0 wt % NiO-10.0 wt % CeO2/3.0 wt %TiO2-γ-Al2O3 resulted in the highest CH4 and CO2 conversion with H2/CO mole ratio close to unity. The optimum reaction conditions in terms of reactant conversion and H2/CO mole ratio were achieved by varying space velocity and CO2/CH4 mole ratio.

In this study, we surveyed over 600 participants to determine: a) major causes to mental stress during the pandemic and its future impacts, and b) diversity in public perception and acceptance (specifically for children) of Covid-19 vaccination. Statistical results and intelligent clustering outcomes indicate significant relationships between sociodemographic diversity, mental stress causes, vaccination perception, and Covid-19 infections. For instance, statistical results indicate significant dependence between mental stress due to Covid-19 and gender (p = 1.7e-05). Over 25% of males indicated work related stress comparing 35% in females however, females indicated more stressed (17%) due to relationships comparing to males (12%). Around 30% of Asian/Arabic participants don’t feel vaccination being safe as compared to 8% of white-British and 22% of white-European indicating significant dependence (p = 1.8e-08) with ethnicity. More specifically, vaccination acceptance for children is significantly dependent to ethnicity (p = 3.7e-05) where only 47% participants show willingness towards children’s vaccination. Primary dataset in this study along with experimental outcomes identifying sociodemographic information diversity with respect to public perception and acceptance of vaccination to children and potential stress factors might be useful for public and policy makers to be better prepared for future epidemics as well as working globally to combat mental health issues and running more effective vaccination campaigns.

Forty-five of intact three sheep breeds (Awassi, Harri, and Najdi) were used in this study (15 animals of each breed), with weight ranged from 23.40 to 25.87 kg. Five animals from each group at the end of growth trial were used for digestibility and nitrogen balance trials. The three groups of sheep had effect (p > 0.05) in the final live weight (FLW). Average daily feed intake (ADI), average daily gain (ADG) and feed conversion ratio (FCR) were significantly (p < 0.05) different among the three groups. For digestibility coefficients, the three breeds of sheep had no effect (p > 0.05) in dry matter (DM), organic matter (OM), crude protein (CP), crude fiber (CF), nitrogen free extract (NFE), neutral detergent fiber (NDF) and acid detergent fiber (ADF). In the similar approach, no significant differences were founds among three breeds of sheep in digestible organic matter, digestible of crude protein, total digestible nutrients and nitrogen retention. The current study concluded that the sheep breeds affected average daily feed intake, average daily gain and feed conversion ratio (FCR). Awassi breed showed the best of average daily gain and feed conversion ratio followed by Najdi then Harri breeds. The breed of sheep had no effect on digestibility coefficients and nitrogen retention.

Vaccination is the most promising approach for ending or containing the SARS-CoV2 pandemic. However, serious post-COVID vaccine reactions including immunocytopenia (ITP) syndrome has been increasingly reported. Several factors cause increased risks including multiple doses, age-dependent heterogeneity in immune-responses, platelet cross-reactions with microbial components, and Long-COVID syndrome. Thus, in the absence of a widely available specific therapeutics, vigilance is important while more studies are imperative. Using a structured questionnaire sent to different regions in Saudi Arabia, we conducted a comprehensive investigation on the frequency, rates, disease patterns, and patient demographics of post-COVID-19 side effects on febrile patients after three major vaccines. Results indicated the majority administered Pfizer BioNtech vaccine (81%, n=809); followed by AstraZeneca (16%, n=155); and Moderna (3%, n=34). In overall 998 participants, 74% (n=737) had no serious symptoms; however, 26.2% (n=261) revealed typical syndrome. In a focused group of 722, shortness of breath (20%), bruises or bleeding (18%), inattention (18%), GIT symptoms (17.6%), skin irritation (8.6%), and anosmia and ageusia (8%) were the most prominent. The onset time was mostly in 1-3 days in 49% (n=128), followed by 4-7 days in 21.8% (n=57), 8-14 days in 16.5% (n=43), and more than a month in 12.6% (n=33). The onsets occurred mostly after the first, second, or both doses 9%, 10%, and 7%, respectively. The frequency of symptoms was significantly higher among after Moderna ® vaccine (P-value = 0.00006) and it was significantly lower in participants who received Pfizer (P-value 0.00231). We did not find significant difference in symptoms related to differences in regions. Similarly, the region, age, gender, education, and nationality had no influence in the dose and onset timings. The findings of this study have significant clinical implications in disease management strategies, preventive measures, and vaccine development. Future vertical studies would reveal more insights into the mechanisms of post-COVID vaccine syndrome.

Objective: The aim of the study was to characterize varieties of Moringa alfileria honey (unfloral and polyfloral) from Saudi Arabia based on antibacterial, antioxidant activities, physicochemical, melissopalynological analysis, total phenolic and flavonoid contents. Material and Methods: The fresh 376 honey samples (3 kg of each) were kindly provided by Alnahal aljwal Company, 2021 flowering season. The honey samples collected in sterile universal glass containers and kept at 2– 8°C until tested. Antibacterial, antioxidant activities and physiochemical analysis were done. Determination of sediment content, total grains, moisture content, water-soluble solids, acidity, electrical conductivity, total sugars content, inverted sugars, glucose (g/100 g), fructose (g/100 g), total glucose + fructose, fructose/ glucose ratio, sucrose (g/100 g), diastase enzyme activity and HMF were calculated. As well as total phenolic and flavonoid contents Results: Antibacterial activity and physiochemical analysis of honey samples w varied. All parameters studied were significantly different (P < 0.05) among all honey varieties. The results of the physiochemical analysis were compared with Saudi National Standard, Codex standard, as well as published data in the literature. Conclusion: It was obvious that the honey quality was varied based on the botanical origins

A homogenized, supersaturated Al-Zn-Mg-Zr alloy was processed by severe plastic deformation (SPD) using high-pressure torsion (HPT) technique for different revolutions at room temperature to get ultrafine-grained (UFG) microstructure. The microstructure and mechanical properties of the UFG samples were then studied by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), as well as by tensile and hardness measurements. Emphasis was placed on the effect of shear strain on the evolution of microstructure of the investigated alloy. Experimental results have shown a very interesting evolution of the decomposed microstructure in a wide range of shear strains imposed by HPT. While the global properties, such as the average grain size (~200 nm) and hardness (~2.2 GPa) appeared unchanged, the local microstructure was continuously transformed. After 1 turn of HPT, the decomposed UFG structure contains relatively large precipitates inside grains. In the sample processed by 5 turns in HPT, segregation of Zn atoms into grain boundaries (GBs) can also be observed. After 10 turns, more Zn atoms have segregated into GBs and only smaller size precipitates can be observed inside grains. The intensive segregation of solute atoms into GBs may significantly affect the ductility of the materials, leading to its ultralow-temperature superplasticity. Our findings pave the way for achieving advanced microstructural and mechanical properties in nanostructured metals and alloys by engineering their precipitation and segregation by means of applying different HPT regimes.

Additive manufacturing (AM) of high strength Al alloys promises to enhance the performance of critical components related to various aerospace and automotive applications. The key advantage of AM is its ability to generate lightweight, robust, and complex shapes. However, the characteristics of the as-built parts may represent an obstacle to satisfy the part quality requirements. The current study investigates the influence of selective laser melting (SLM) process parameters on the quality of parts fabricated from different Al alloys. A design of experiment (DOE) is used to analyze relative density, porosity, surface roughness, and dimensional accuracy according to the interaction effect between the SLM process parameters. The results show a range of energy densities and SLM process parameters for the AlSi10Mg and Al6061 alloys needed to achieve “optimum” values for each performance characteristic. A process map is developed for each material by combining the optimized range of SLM process parameters for each characteristic to ensure good quality of the as-built parts. The second part of this study investigates the effect of SLM process parameters on the microstructure and mechanical properties of the same Al alloys. This comprehensive study is also aimed at reducing the amount of post-processing needed.

This study was conducted in the Dhanu River and adjacent waters at Mithamain upazila (sub-district) under Kishoreganj district of Bangladesh to prepare a check list of available native fishes with their availability status, conservation perspectives, habitat preferences, population trends and intimidations. Data were collected monthly by direct field survey, focus group discussions, and personal interviews with fishers by using a semi-structured questionnaire and a pictorial check list of fish species. A total of 91 indigenous fish species of 59 genera belonging to 29 families under 11 orders were documented where 17.58% species was abundantly available, 27.47% was commonly available, 31.87% was moderately available and 23.08% was rarely available. Cypriniformes was found as the dominant order, consisting 37.36% of the fish species aggregation and Cyprinidae was the most dominant family with 32.97% of the entire species assemblage. Twenty four piscine species (26.37%) were under threatened category in Bangladesh which subsumed 3 critically endangered (3.29%), 11 endangered (12.08%), and 10 vulnerable species (10.99%). Notably globally threatened Cirrhinus cirrhosus, Channa orientalis, and Wallago attu were available there. Fish population trends of 24.18% and 59.34% of the entire fish species was found in decreasing trends in global and national level, respectively. Leading intimidation to the fish diversity was indiscriminately overfishing, followed by fishing by dewatering of wetlands, katha fishing method, use of deprecated fishing gears, climate change, etc. Minimization of anthropogenic impacts, assuring the flux of water round the year, enactments of fish laws, installation and management of fish sanctuaries, and raising public awareness can be effective for the conservation of existing fisheries resources.

The current rapidly changing and highly competitive market has put companies under a great pressure not only to be successful, but also to sustain their success into the future. In addition, in recent years, companies have become more aware of the fact that it is no longer enough to take care of economic aspects, being crucial to also take care of environmental and social aspects in order to actually succeed and lead in the current and future markets. In this context, companies are urged to move towards more innovative manufacturing practices that maintain a healthy balance among economic, environmental and social performances, which are the three pillars of the sustainability performance. To give some insight into this issue, a Systematic Literature Review (SLR) is conducted in this paper regarding the current trends in the field, doing special focus on the link between lean-green manufacturing and the different sustainability aspects. The SLR concluded that lean and green implementations as stand-alone systems are usually not enough to ensure the required balance between the three pillars of sustainability, suggesting further combining them into a single approach. Researchers expect to achieve further improvements in the sustainability performance moving towards the next level of sustainability.

Background: Asthma is a widespread chronic respiratory disease that poses a significant public health challenge. The current study investigated the associations between air pollution and asthma severity among individuals residing near the Sohar industrial port (SIP) in Oman. Despite the presence of multiple major industrial complexes in Oman, limited knowledge regarding their impact on respiratory health is accredited. Hence, the primary objective of this study is to offer valuable insights into the respiratory health consequences of industrial air pollution in Al Batinah North. Methods: The state health clinics' records for patient visits related to asthma were collected for the timeframe spanning 2014 to 2022. Exposure was defined as the distance from SIP, Majan Industerial Area (MIA) and Sohar Industerial Zone (SIZ) to determine high, intermediate, and low exposure zones (12 km, respectively). Exposure effect modifications by age, gender, and smoking status were also examined. Results: The conducted cross-sectional study of 410 patients (46.1% males and 53.9% females) living in over 17 areas around SIP revealed that 73.2% of asthmatics were under 50 years old, with severity significantly associated with closeness to the port. Risk ratios were estimated to be (RR:2.42; CI95%: 1.01–5.78), (RR:1.91; CI95%: 1.01–3.6), and (RR:1.68; CI95%: 0.92–3.09) for SIP, MIP and SIZ areas, respectively, compared to the control area. Falaj Al Qabail (6.4 km) and Majees (6 km) had the highest number of asthma patients (N. 69 and N. 72), and highest percentages of severe asthma cases among these patients (28% and 24%) with significant risk ratios (RR:2.97; CI95%: 1.19–7.45 and RR:2.55; CI95%: 1.00–6.48), correspondingly. Moreover, severe asthma prevalence peaked in the 25-50 age group (RR:2.05; CI95%: 1.26–3.33), and this linkage between asthma and age was much more pronounced in males than females. Smoking and exposure to certain contaminant (dust and smoke) increased also the risk of severe asthma symptoms, but their effects were less important in the high risk zone, suggesting much more important risk factor. A neural network model accurately predicted asthma risk (94.8% accuracy), with proximity to Sohar Industrial Port as the most influential predictor. Conclusion: The study highlights the High asthma burden near Sohar Industrial Port, linked to port proximity and smoking and wind direction as major risk factors. These findings inform vital public health policies to reduce air pollution and improve respiratory health in the region, prompting national policy review.

This study involved the fabrication of a set of Aluminum ion-grafted SBA-15 utilizing ethylene-diamine and trimethylamine ionic liquids. The primary objective was to examine the impact of the fabrication environment on the physicochemical characteristics of the catalysts. Comprehensive characterization of the Al-SBA-15 catalysts was conducted using various techniques, including XRD, FTIR, surface area, pyridine FTIR, 27Al-NMR, TGA, HRTEM, and FESEM, to analyze their physicochemical characteristics. Furthermore, the acidic characteristics were examined by con-ducting potentiometric titration in a nonaqueous solvent and employing FTIR spectroscopy to an-alyze the chemisorbed pyridine. The effectiveness of the fabricated acid materials was evaluated by testing their performance in the acetic acid esterification with butanol. The findings obtained reveal that the mesostructured of SBA-15 remains intact following the successful inclusion of Al3+ ions into the silica frameworks. Additionally, a remarkable enhancement in the existence of both Bronsted and Lewis acid centers is noted due to the grafting process of Al3+ ions. At temperatures of 80°C and 100°C, the reaction in Al-SBA-15(T-120) proceeds swiftly, reaching approximately 32% and 38% conversion, respectively, within a span of 110 minutes. The excellent catalytic performance observed in the esterification reaction can be attributed to two factors: the homogeneous distribution of Al3+ ions within the SBA-15 frameworks and the acidic character of Al-SBA-15. The findings further indicate that the grafting process for incorporating Al3+ ions into the silica matrix is more efficient.

The variability of ozone over Egypt has been studied in this work. Higher values of coefficient of variation (COV) at eight stations occur at winter while lowest values occur at summer. The COV is function of latitude in annual, winter and spring where it decreases gradually from the north to south of Egypt. The trend analysis of ozone over the eight stations indicates negative trends over northern stations for both annual and seasonal time series with the greatest one at winter. The horizontal distribution of ozone trend values is negative over all Egypt in winter while it positive over middle and south Egypt in the other seasons. The long-term variability of the behavior of the annual ozone shows positive trend values in ozone are the dominant features during the period 1979- 1989 at the most stations. Negative trend values in ozone are the dominant features during the period 1990- 2014 at all stations. The Mann–Kendall test confirms that there is an abrupt change towards decreasing of ozone occurs in 1981, 1984, 2012, 1999, 2000, 1998 and 2010, while a change towards increasing of ozone appears in 2006, 2014, 1993 and 1989.

Although carbon (C) efflux from soils treated with organic wastes was widely covered in temperate and cold regions, still such data is not sufficient from arid and semi-arid regions. Saudi Arabia produces more than 335,000 tons/year of cow manure (CM), this CM either left as raw manure or being composted. The application of high C/N amendments is expected to increase soil organic carbon and reduce CO₂ fluxes. A 90-day incubation experiment was conducted to study CO₂ efflux, organic C microbial biomass C, available NH₄+and NO₃-when added to agricultural soil. Six manure types were added: cow manure, cow manure compost, cow manure biochar, cow manure stripped ammonia at pH 12 with a temperature of 95oC, cow manure stripped ammonia at pH 9 with a temperature of 95oC and control. The application of CM resulted in a considerable increase in soil available nitrogen, CO₂ efflux compared to other treatments. Cow manure biochar showed the lowest CO₂ efflux. Cumulative CO₂ effluxes of cow manure effluents were lower than CM this possibly due to the relatively high C:N ratio of manure effluent. The content of, P, Fe, Cu, Zn and Mn were decreased as incubation time increased. microbial biomass C of cow manure stripped ammonia at pH 12 with a temperature of 95oC were increased at 7 and 60 days illustrating to temperature effect on the decomposing of manure materials.

Background: Reminiscence studies and life reviews have a number of proven advantages. Future generations gain by learning from elders' life experiences, as do older adults themselves who share their memories. Despite Oman's sizable geriatric population, research on older individuals' life experiences is scarce. Therefore, this study aims to explore the life experiences of older Omani individuals across their many life stages, from childhood to the present. Methods: This was a qualitative study design. A total of 13 Omani older adults (9 females and 4 males) with an average age of 68 years were recruited for this study. Socio-demographic and life review information was gathered according to a set of semi-structured guiding questions. The responses were then captured on audio recordings, which underwent transcription and translation. Thematic analysis techniques were applied to the extracted data. Results: Three main themes were evident in the study’s findings: Childhood memories, Friendships, and Relationships, as well as the elders’ past. Additionally, older adults passed on a number of gems of wisdom to be shared with the younger generations. Conclusion: This study aided in revealing the resiliency, social connections, and life reflections of Omani older adults. Based on these findings, future studies might explore particular aspects of older experiences and pinpoint solutions to improve their quality of life and well-being.

Mining can impact the environment, biodiversity and human health through direct and indirect practices. This study investigated the effects of gold mining on Gerbillus nanus, pointing to organ dysfunction and redox imbalance. Soil samples, Lycium shawii and G. nanus were collected from a site near a mining planet and a control site. Soil and L. shawii samples from the mining site showed a significant increase cadmium (Cd), cupper (Cu), mercury (Hg), arsenic (As), zinc (Zn), lead (Pb) and vanadium (V). Hepatic, renal and pulmonary Cd, Pb, Hg, Zn, Cu, Fe, As and V concentrations were increased significantly in G. nanus at the mining site. Markers of liver and kidney function were elevated in serum, and several histological manifestations were demonstrated in liver, kidney and lung of G. nanus at the mining site. Malondialdehyde and nitric oxide were increased, and glutathione and antioxidant enzyme were declined in the liver and kidney of G. nanus. In conclusion, mining practices triggered tissue damage and oxidative stress in G. nanus living close to the mining site. These findings can represent the scientific basis for evaluating the environmental and health impact of mining in the on the nearby communities.

There are few published studies assessing dental students' and faculty's perception regarding environmental sustainability in dentistry (ESD), its existence within the dental curricula, along with barriers and enablers for its integration. As far as the authors know, no published study looked into this in Saudi Arabia, and this is what the current study aims to explore. A cross-sectional survey using validated online questionnaires for dental students and faculty was carried out in 26 dental schools in Saudi Arabia. The validated questionnaire utilized 25 questions using Qualtrics (XM) software. Both descriptive statistics and thematic analysis were included in the data analysis. ESD content is not formally embedded within the dental curricula in all 26 included universities in Saudi Arabia. Although the majority of students and faculty members agreed or strongly agreed on the importance of ESD as a whole and the importance of teaching it, more than 82% and 81% of students and faculty, respectively, demonstrated a lack of basic knowledge concerning ESD. There is a high demand for incorporating ESD content in dental education in Saudi Arabia. To achieve this, resources and policy changes are necessary. A top-down approach is needed, including incorporating ESD into dental education standards, using evidence-based practices in revising infection control regulations and providing institutional support through training, materials, and incentives. National dental associations and governments should provide practical solutions and actively support dental professionals in implementing ESD.

Antimicrobial resistance (AMR) poses a global public health threat, with rates directly linked with consumption. The World Health Organization (WHO) AWaRе-classification aims to guide antibiotic use, which is influenced by drug availability, affordability, and economic policies. In Jordan, a high proportion of consumed antibiotics belong to the 'Watch' category. Data from the WHO-AWaRе classification, the Essential Medicines List, and the Jordan Food and Drug Administration were analyzed. Antibiotics for adults were classified and their cost per Defined Daily Dose (DDD) was determined, then affordability was assessed. In 2023, 43 injectable and 43 oral antibiotics for adults were registered in Jordan. 'Watch' antibiotics were the most common. 'Access' antibiotics had the lowest cost/DDD. 'Rеsеrvе' antibiotics were the most expensive with few generics. Injectable antibiotics had a negative correlation between cost and the number of alternatives. Affordability was higher for oral antibiotics compared to injectable ones. 'Rеsеrvе' antibiotics were generally unaffordable. This study highlights the need to promote 'Access' antibiotics over other categories by encouraging registration of missing ‘Access’ antibiotics and adjusting 'Watch' and 'Rеsеrvе' antibiotic prices. Competition among generics can lead to lower prices, increasing affordability and accessibility. We emphasize the importance of the AWaRе-classification in guiding antibiotic use in Jordan.

In the era of mounting water scarcity, particularly in arid regions, the agricultural sector is striving to optimize the water resource management practices. Treated wastewater (TWW) has emerged as a viable alternative to freshwater for irrigation, offering a sustainable solution to water conservation. However, ensuring the safety and quality of TWW is paramount to safeguard for both crop health and environmental integrity. Electrical conductivity (EC), a critical factor in assessing TWW suitability for irrigation, can significantly impact crop yields and soil health since it is directly linked to the concentration of dissolved salts and ions. Therefore, this study delves into the development of advanced predictive models for EC assessment by employing supervised machine learning (ML) techniques like the Support Vector Regression (SVR), Adaptive Network-based Fuzzy Inference System (ANFIS), and Multiple Linear Regression (MLR). The TWW samples collected from Al-Qatif area, Saudi Arabia were assessed in the lab through a sensor-based real-time monitoring system integrated with Internet of Things (IoT) network and a multiprobe device. The key water quality parameters assessed involved, temperature (T), pH, Oxidation Reduction Potential (ORP), Resistivity (RES), Total Dissolved Solids (TDS), Salinity and Turbidity which served as the foundation for these models, given their profound influence on and their anticipated impact on EC levels. Following feature selection, two distinct model combinations were identified for the SVR, ANFIS and MLR models. Furthermore, to evaluate prediction performance, four statistical criteria, including coefficient of determination (R²), correlation coefficient (R), mean square error (MSE), and root mean square error (RMSE), were employed. Overall, the comparative performance results proved that ANFIS-M2 indicated the strongest predictive capability with the R² value of 0.99572 and 0.75145 and the RMSE values of 0.00965 and 0.01134, respectively in both calibration and verification stages.

An improved FSM method is used in geophysical and environmental corrections to enhance the final product of the along track Jason-2 SLA data and extend it near the Red Sea borders. In this study the ionospheric correction range, wet tropospheric correction range, sea state bias correction range and dry tropospheric correction range are enhanced and improved using FSM01, which helped to retrieve three more tracks (106, 170 and 234), earlier neglected by the distribution centers, and extend the tracks towards the coast. The FSM01 SLA is compared with Jason-2 SLA and AVISO SLA for the available 5 tracks, in which the FSM01 SLA show a good agreement and higher correlation with the Jason-2 SLA compared with that of AVISO, in addition to that it fills the gaps in the times series of all tracks. The new retrieved tracks also compared with those retrieved by AVISO, both data show similar variability, with FSM01 SLA show no gaps in the time series. The FSM01 SLA also extended towards the coast and show high correlation with the coastal tide measurements.

The current study focused on reviewing the rapid growing of using magnetic water in different fields of science and measure the influence of several intensities of magnetization on the chemical and electrical properties of tap water treated by reverse osmosis. The work includes circulation of water for 24 h. in magnetic fields of intensity 500, 1000, 1500, and 2000 G. The magnetization of water causes increasing some positive and negative ions in water such as (Mg, K, Na, Cl¯, Alkaline and SiO₂) and decreasing some positive and negative ions (Ca and SO₃). In the near future, the application of concepts of sustainability development in civil engineering have the to produce structures in harmony with these concepts through using of high-performance materials with less impacts on the environmental and have low cost. The main application of using magnetic water is improvement the geotechnical properties of soil through precipitation of calcite which increases the bond between soil particles and then strength of soil.

While the debate on the association between Enterobius vermicularis (E. vermicularis) and acute appendicitis has not been settled, a few case reports of this very rare encounter are beginning to come to light. While E. vermicularis is one of the most common parasitic infestations around the world, acute appendicitis, on the other hand, is also a commonly encountered condition in general surgery. However, the association between the two remains controversial. Here we present a case report of a young woman with appendicitis associated with (E. vermicularis).

This paper introduces the complex Rayleigh-van der Pol-Duffing oscillators (RVDOs), which are hyperchaotic and can be either autonomous or non-autonomous. The fundamental dynamics of the autonomous and nonautonomous complex RVDOs including dissipation, symmetry, fixed points and their stability are studied. These oscillators are found in various important fields of physics and engineering. The paper proposes a scheme to achieve phase synchronization (PS) and antiphase synchronization (APS) for different dimensional models. These kinds of synchronization are considered as generalization of several other types of synchronization. For this scheme we use the active control method based on Lyapunov stability theory. By analytically determining the control functions, the scheme achieved PS and APS. Our scheme is applied to study PS of hyperchaotic behaviours for two distinct hyperchaotic non-autonomous and autonomous complex RVDOs. Additionally, the scheme is employed to achieve APS of chaotic real non-autonomous RVDO and hyperchaotic complex autonomous RVDO, including those with different dimensions. Our work presents numerical results that plot the amplitudes and phases of these hyperchaotic behaviours, demonstrating the successful achievement of PS and APS.

Inorganic nanoparticles based on magnetite improve the mechanical, thermal, and magnetic properties of microporous cryogel polymer composites. Here we report the synthesis of microporous cryogel based on the crosslinked sodium vinyl sulfonate (Na-VS) and 2-acrylamido-2-methylpropane sulfonic acid sodium salt (Na-AMPS). The magnetite nanoparticles were inserted into Na-VS/Na-AMPS cryogel either during its crosslinking polymerization or by in-situ technique after its crosslinking. The morphology, particle sizes, thermal stability and magnetite contents of Na-VS/Na-AMPS cryogel and its magnetite composites were investigated. The prepared Na-VS/Na-AMPS cryogel and its magnetite composites were used as adsorbents for methylene blue (MB) cationic dye using optimum conditions. The magnetite Na-VS/Na-AMPS cryogel composite prepared by in-situ technique achieved the best adsorption MB removal capacity for 7 cycles among the other adsorbents via chemical adsorption mechanism at room temperature.

This study aimed to investigate the fatigue performance and interfacial strengthening mechanisms of Al6061-to-Cu dissimilar lap joints via electromagnetic pulse welding (EMPW). The load-bearing capacity of the joints at discharge voltages of 14 kV and 16 kV was superior to that of 12 kV. Furthermore, the fatigue life of the 14 kV joints was one order of magnitude higher compared to the 12 kV joints. SEM observation of the fatigue fracture surface revealed the presence of typical "tire-mark" fatigue striations only in the 14 kV joint, indicating higher ductility and the ability to withstand extended plastic deformation. Notably, ultra-fine nanocrystalline Al2Cu phase, amorphous phase, and numerous dislocations hindered EBSD acquisition in the transition zone. Nevertheless, dense low-angle grain boundaries (LAGBs) and refined grains were examined at the bonding interface. This suggests that the high-velocity collision caused severe plastic deformation and led to the formation of substructures. The interfacial strength was attributed not only to the "wave-like" or "inverted hook-like" diffusion layer but also to the presence of refined grains along the interface and nanocrystalline Al2Cu in the transition zone. Furthermore, the hybrid nanocrystalline-amorphous microstructure strengthened the joint by regulating the balance between strength and ductility.

Peste des Petits Ruminants (PPR) is one of the major transboundary animal diseases that severely impact livestock production and trade worldwide. An investigation was carried into the seroprevalence and risk factors of PPR in small ruminants, camels, and wild ruminants in Bahrain. A total of 1240 serum samples were collected from 119 sheep flocks and 1224 serum samples from 125 goat herds. In addition, 100 sera from camels and 38 sera from wild ruminants, were collected. Serum samples were tested for the presence of PPR specific antibodies using a competitive ELISA. Flock management and health information of the flocks and herds were collected using a semi-structured questionnaire. The individual prevalence of PPR in sheep and goats was 26% and 25.5%, respectively. The flock or herd level prevalence of PPR was 22.7% and 29.6% in sheep and goats, respectively. None of the tested camels or wild ruminants were positive for PPR-specific antibodies. Sheep and goats from the Northern governorate were more likely to be seropositive to PPR than in other governorates. On the individual animal level, the univariate analysis suggested; age (&lt;12 months), sex (male), and health status (weak animals) as risk factors for PPR seropositivity. On the flock/herd level, the multivariable logistic regression analysis identified large flock/herd size and semi-intensive farming as risk factors for PPR seropositivity.

A new class of nano-cube core-shell heterostructures containing Ag coating on the top of WO₃ was fabricated. Physical vapor deposition was used to produce WO₃ based nano-heterostructures. All kind of wet toxic chemical process was avoided to make the process simple and contaminant free. Sputtering of WO₃ and a subsequent thermal annealing process was done to create nano-cubes of WO₃. After that, sputtering of Ag was performed to form the Ag-WO₃ core-shell nano-heterostructures (CSNH). The CSNHs were characterized using field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction analysis (XRD) and UV-vis spectroscopy. The morphologies, elemental analysis, interfaces, crystallinity, phases, and chemical compositions were analyzed. The bottom-up growth of WO₃ nanocubes was studied using different time periods at 900°C. Ag coating was also studied before and after annealing. Finally, an optical property (band gap) was also analyzed using Tauc plot derive from absorption spectra. The tailoring the band gap of WO₃ from ~2.9eV to ~ 2.45 eV was observed while Ag-WO₃ CSNH formed.

This study delves into the dynamics of 'Variations' and 'Claims' within construction projects, specifically under the FIDIC-Red Book 1999 (FIDIC 1999) framework. It aims to identify, categorize, and devise mitigation strategies for key types of Variations and Claims, aligning with the FIDIC Conditions of Contract. The research, drawing on inputs from construction industry professionals including Contract Administrators and Project Managers, focuses on the MENA re-gion. This choice is driven by the region's extensive adoption of FIDIC standards and its rapidly growing construction sector. Data collection encompassed a questionnaire distributed to 80 industry experts, predominantly through interviews, focusing on countries like Saudi Arabia, UAE, Kuwait, and Egypt. These locations were chosen to reflect diverse construction practices and the involvement of international firms. Utilizing SPSS-V.25 for statistical analysis, the study uncovers the most prevalent and impactful causes of Variations and Claims, highlighting the critical need for managerial intervention. A key feature of this study is the integration of Scientometric Analysis for a quantitative review of current literature, providing a comprehensive academic context. A significant addition to the methodology is the implementation of a k-means clustering analysis. This advanced statistical technique further classifies the data into distinct clusters, each representing unique combinations of 'Frequency' and 'Impact' of Variations and Claims. The k-means analysis elucidates intricate patterns and potential solutions, offering profound insights into effectively managing these issues. These analytical advancements are crucial in identifying significant and manageable responses to reduce the frequency and impact of Variations and Claims in construction projects.

Hyperlipidemia case was described as a rise of lipid profile or lipoproteins in the blood. This study describe briefly investigate the reducing hyperlipideamia impact of Ginkgo biloba on the level of lipid profile.

This article delves into the enduring relevance of Liberal International Relations (IR) Theory amidst persistent criticisms regarding power dynamics and its applicability in emerging states. Despite its detractors, Liberal IR Theory offers a nuanced understanding of state behavior, blending social contexts with power dynamics. It recognizes the intricacies of economic interdependence and advocates for a balanced approach in advancing democracy and human rights. While nationalism poses challenges to international institutions, their adaptability endures. Leaders, albeit constrained, retain the capacity to foster peace through visionary leadership and global cooperation. By acknowledging its limitations and fostering open dialogue, Liberal IR Theory continues to evolve, poised to contribute to a just and peaceful global order.

Contamination in coastal regions attributed to fluoride and nitrate cannot be disregarded, given the substantial environmental and public health issues they present worldwide. Maintaining water quality is crucial for environmental well-being. This comprehensive study was performed to assess the spatial as well as indexical water quality, identify contamination sources, and evaluate associated health risks pertaining to nitrate and flouride in AlHassa region, KSA. The physiochemical results revealed a pervasive pollution of the overall groundwater. The dominant water type was Na-Cl, indicating saltwater intrusion and reverse ion exchange impact. Spatiotemporal variations in physicochemical properties suggest diverse hydrochemical mechanisms, with geogenic factors primarily influencing groundwater chemistry. The groundwater pollution index varied between 0.8426 and 4.7172, classifying samples as moderately to very highly polluted. Similarly, the synthetic pollution index (in the range of 0.5021-4.0715) revealed that none of the samples had excellent water quality, with various degrees of pollution categories. Nitrate Health Quotient (HQ) values indicated chronic human health risks ranging from low to severe, with newborns being the most vulnerable. Household use of nitrate-rich groundwater for showering and cleaning did not pose significant health risks. Fluoride HQ decreased with age, and children faced the highest risk of fluorosis. The Hazard Index (HI) yielded moderate to high-risk values. Nitrate risks were 1.21 times higher than fluoride risks, as per average HI assessment. All samples fell into the vulnerable category based on the Total Hazard Index (THI), with 88.89% classified as very high risk. This research provides valuable insights into groundwater quality, guiding water authorities, inhabitants, and researchers in identifying safe water sources and vulnerable human populations. The results highlight the need for appropriate treatment techniques and long-term coastal groundwater management plans.

This paper investigates the influence of magnetic field for a two dimensional deformations on a two temperature problem at the free surface of a semi-infinite semiconducting medium under the effect of mechanical force during a photothermal theory and the effect of hydrostatic initial stress on the medium. The Harmonic Wave Method (Normal Mode Analysis) has been used to obtain the equations of elastic waves, heat conduction equation, quasi-static electric field, carrier density, two temperature coefficient, ratios, and constitutive relationships for the thermo-magnetic-electric medium. The effects of several parameters as thermoelastic and thermoelectric coupling parameters and two temperature parameter of this force on the displacement component, force stress, carrier density and temperature distribution has been depicted graphically.

Our study examines the association of the presence of mildew, cockroaches, and pets in homes as well as household dust allergens with the prevalence and/or severity of allergic diseases. No study has concurrently assessed home environment exposures in relation to allergic conditions in the general US population. Data from 5,409 participants from the 2005-2006 National Health and Nutrition Examination Survey living in their current homes for ≥1 year were analyzed. Multivariate logistic regression analyses between home exposures and allergic diseases prevalence and severity were performed. In adjusted analyses, mildew was associated with higher current asthma, allergies, and allergic rhinitis prevalence; endotoxin, with higher current asthma prevalence), and dust Canis familiaris (Can f) 1, with higher allergic rhinitis prevalence. However, presence of cockroaches and dust Dermatogoides farinae (Der f) 1 were associated respectively with lower current asthma and allergies prevalence. Presence of mildew, dust Der f1, Dermatogoides pteronyssinus (Der p) 1, Feline domesticus (Fel d) 1, and endotoxin were all associated with asthma and/or wheeze severity. Non-atopic asthma was more frequent with mildew and/or musty smell dust and higher dust Fel d1 concentration, while atopic asthma was more prevalent with higher Can f1and endotoxin concentrations in dust. This study confirms previous relationships and reports novel associations, generating hypotheses for future research.

Tropical forests harbor complex communities that are linked together by biotic relationships. Asian forests in particular have lost many apex predators due to habitat loss. We studied a small forest patch in northeastern Bangladesh, Satchari National Park, to determine density and diversity of nocturnal mammals and evaluate their relationships. Transects were walked from February 2015 to July 2016 and density was estimated using distance sampling. Nine species of mammals (5 arboreal and 4 ground-dwelling) were encountered. Densities of the common palm civets, Paradoxurus hermaphrodites, Bengal slow loris, Nycticebus bengalensis, were the highest (19.48 and 15.03 individuals/km2). Density of small Indian civets, large Indian civets and Indian mongoose were lower (2.31-5.55 individuals/km2). Unexpectedly, a wide range of nocturnal mammals co-existed in this forest patch, in spite of fragmentation and severe disturbance. We did not find any significant association between any of the species studied, although this could be an artifact of low sample size. Conservation in Bangladesh remains a challenge due to high human population density. Thus, strict conservation measures are needed to permit the long-term survival of these species.

The persistent issue of bacterial and fungal colonization of artificial implantable materials and decreasing efficacy of conventional systemic antibiotics used to treat implant-associated infections has led to the development of a wide range of antifouling and antibacterial strategies. This article reviews one such strategy where inherently biologically active renewable resources, i.e. secondary plant metabolites (SPMs) and their naturally occurring combinations (i.e. essential oils) are used for surface functionalization and synthesis of polymer thin films. With a distinct mode of antibacterial activity, broad spectrum of action and diversity of available chemistries, secondary plant metabolites present an attractive alternative to conventional antibiotics. However, their conversion from liquid to solid phase without significant loss of activity is not trivial. Using select examples, this article shows how plasma techniques provide a sufficiently flexible and chemically reactive environment to enable the synthesis of biologically-active polymer-coatings from volatile renewable resources.

Energy demand has been overgrowing in developing countries. Moreover, the fluctuation of fuel prices is a primary concern faced by many countries that highly rely on conventional power generation to meet the load demand. Hence, the need to use alternative resources such as renewable energy is crucial to mitigate fossil fuel dependency alongside the reduction of Carbon Dioxide emission. Algeria’s being the largest county in Africa has rapid growth in energy demand since the past decade due to the significant increase of residential, commercial, and industry sectors. Currently, the hydrocarbon-rich nation highly dependent on fossil fuels for electricity generation, where renewable energy only has a small contribution to the country’s energy mix. However, the country has massive potential for renewable energy generations such as solar, wind, biomass, geothermal, and hydropower. Therefore, the government aims to diversify away from fossil fuel and promoting renewable energy generations through policies and renewable energy-related programs. The country’s Renewable Energy and Energy Efficiency Development Plan focuses on large scale solar, wind generation as well as geothermal and biomass technologies. This paper provides an update on the current energy position and renewable energy status in Algeria. Moreover, this paper discusses RE policies and programs that aim to increase the country’s renewable energy generation and its implementation status.

Over the years, the need for autonomous systems such as drones, also known as unmanned aerial vehicles (UAVs), has significantly increased in popularity across several industries, including the military. The Internet of Battlefield Things (IoBT) represents a modern technological advancement that significantly enhances the operational efficacy of defense systems. It establishes an integrated military force by connecting individuals to intelligent technology in drones, radios, equipment, antennas and ground stations. This is achieved through the utilization of cloud and edge computing, sensors, mobile devices, embedded systems, and IoT-based systems. However, IoBT security is significantly compromised by enemies that exploit the vulnerabilities and malicious intrusions that specifically target the external environment or to obtain sensitive data. In addition, a comprehensive understanding of cyberattacks and countermeasures is essential for assuring the security of IoBT. On the other hand, as cyber threats get more complicated, trust becomes increasingly important for the security of digital systems. Within this context, the zero trust architecture contends that the security of a complex network is inherently vulnerable to internal and external threats. In defense, UAV security system applications, for example, the primary purpose of the zero trust architecture is to limit the vulnerability of military UAV systems to cyberattacks, hence reducing the possibility of data breaches and illegal entry. This study conducts a systematic review aimed at identifying different aspects of cybersecurity strategies for protecting UAV systems within the IoBT domain. Furthermore, zero trust architecture is presented in the study as an effective prospective solution to the security issues that develop in defense UAV systems.

Based on DFT (density functional theory) using B3LYP/6-31G method, theoretical investigations applied to demonstrate the structural, electronic properties and stability of (N,Nˊ-(1,4-phenylene)bis(1,8-naphthalimide)) is more stable than the compound (N-(4-amino phenyl)1,8-naphthalimide) by (-1.2762 eV or -29.4299 Kcal.mol-1) depending on the values of HOMO, synthesis reaction of imide is spontaneous and endothermic at temperature 275˚C according to the values of ∆rS, ∆rG and ∆rH.

The field of Cooperative Intelligent Transport Systems and more specifically Pedestrians to Vehicles could be characterized as quite challenging, since there is a broad research area to be studied, with direct positive results to society. Pedestrians to Vehicles is a type of Cooperative Intelligent Transport System, within the group of Early Warning Collision/Safety System. In this article, we examine the research and applications carried out so far within the field of Pedestrians to Vehicles Cooperative Transport Systems by leveraging the information coming from Vulnerable Road Users’, smartphones. Moreover, an extensive literature review has been carried out in the fields of Vulnerable Road Users Outdoor Localisation via smartphones and Vulnerable Road Users Next Step/Movement Prediction, which are closely related to Pedestrian to Vehicle applications and research. We identify gaps that exist in these fields that could be improved/extended/enhanced or newly developed, while we address future research objectives and methodologies that could support the improvement/development of those identified gaps.

The paper delineates the developed vision system of the UR5 cobot and the operating algorithm of the robotic quality control station. The hardware-software architecture of the developed robotic station was shown, consisting of a UR5 cobot equipped with a web camera and a stationary industrial camera with a lighting system. Image processing and analysis algorithms were described, the method of control and communication between the station components was discussed, and two operating scenarios were presented as a single robotic station and a robotic line. Based on the results obtained, the level of measurement noise, accuracy, and repeatability of the developed vision system were estimated.

This research presents alternative solutions for an Energy Efficiency Management System (EEMS) serving as a framework for optimizing the energy consumption algorithm and lowering energy consumption. First, a monitoring Wireless Sensor and Actuator Network (WSAN) is used for sensing, measuring, gathering data, and modeling all the dynamic disturbance parameters of the rooms in the building. Second, integrated software for metering and controlling the processes of digital data flow is used. Third, an alternative solution is proposed to reduce energy consumption. The primary benefits of this system are real-time monitoring; rapid, alternative solutions; and the ability to make a prudent decision on how to lower energy consumption. The system shows instant and accumulated solutions for short and long-term time planning. The solutions identified can be implemented in the same buildings under the same circumstances. The universities of Majmaah and Philadelphia have buildings with similar infrastructure. The system was applied to the buildings at Philadelphia University. The results were generalized to both universities. After implementation, the energy consumption of the EEMS using WSAN (based on the monitoring was reduced up to 23% when compared to that of the initial state.

Background and Objectives: In the current Covid-19 pandemic, children below the age of 12 could manifest Covid-19 symptoms and serve as a reservoir for the virus in the community. The present study was conducted to evaluate the reactogenicity, and immunogenicity of BBIBP-CorV, prior to involving this age group in the vaccination program in the kingdom of Bahrain. Subjects and Methods: The study included 582 children from 3 to 12 years old of Bahraini and non-Bahraini nationality, all of which contributed to the reactogenicity study. Of those, 401 contributed to the immunogenicity study. All children received 2 doses of BBIBP-CorV inactivated virus 3 weeks apart. To assess reactogenicity, children were followed up for 5 weeks to evaluate any vaccine-related adverse events (AE). To assess immunogenicity, blood was collected on day 0 and day 35 to assess antibody titer against S, N, and neutralizing antibody. Results: Of the 582 participants, (45.4%) were female, (54.61%) were male, with 49% in 9-12 age group. Of the 401 children contributing to the immunogenicity study, 274 (68.3%) had no prior exposure to Covid-19. The overall incidence of AE was 27.7%. No significant difference was found among different age groups. The most frequent AE was local (at the injection site) and occurred in 16% of children, followed by fever in 9.3%. No serious adverse events were reported. The Seroconversion rate was 100% among children with no prior exposure to Covid-19. Children with previous Covid-19 exposure had higher averages of anti-S (2379 U/ml compared to 409.1), anti-N (177.6 U/ml compared to 30.9) and neutralizing antibody (93.7 U/ml compared to 77.1) than children with no prior exposure at day 35. Conclusions: Two doses of COVID-19 BBIBP-CorV on the subjects aged between 3 to 12 has good safety and tolerance and can induce an effective immune response and neutralizing antibody titer.

The work reports a facile synthesis of high thermally-stable nanocrystalline anatase TiO2 nanoparticles (NPs) doped with different atomic concentrations (0.5, 1.0, 3.0, and 6.0%) of Gd3+ and Nd3+ ions by a template-free and one-step solvothermal process, using titanium(IV) butoxide as titanium precursor and dimethyl sulfoxide (DMSO) as solvent. The structure and morphology of the Gd3+, Nd3+, and 0.5%Gd3+-0.5%Nd3+/doped TiO2 NPs have been characterized by using various analytical techniques. The Gd3+/ and Nd3+/TiO2 molar ratios were found to have a pronounced impact on the crystalline structure, size, and morphology of TiO2 NPs. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) studies revealed the proper substitution of Ti4+ by Gd3+ and Nd3+ ions in the TiO2 host lattice. The as-prepared Gdx/TiO2, Ndx/TiO2, and Gd1.0/Ndx/TiO2 bimetallic NPs, x = 0.5, 1.0, 3.0, and 6%, have been investigated as electrocatalysts for hydrogen evolution reaction (HER) in 1.0 M KOH solution using a variety of electrochemical techniques. At any doping percentage, the Gd1.0/Ndx/TiO2 bimetallic NPs showed higher HER catalytic performance than their corresponding counterparts i.e. Gdx/TiO2 and Ndx/TiO2. Upon increasing the Nd content from 0.5 to 6.0%, the HER catalytic performance of the Gd1.0/Ndx/TiO2 bimetallic NPs was generally enhanced. Among the studied materials, the bimetallic Gd1.0/Nd6.0/TiO2 NPs emerged as the most promising catalyst with an onset potential of -22 mV vs. RHE, a Tafel slope of 109 mV dec-1, and an exchange current density of 0.72 mA cm-2. Such HER electrochemical kinetic parameters are close to those recorded by the commercial Pt/C (onset potential: -15 mV, Tafel slope: 106 mV dec-1, and exchange current density: 0.80 mA cm-2), and also comparable with those measured by the most active electrocatalysts reported in the literature. The synergistic interaction of Gd and Nd is thought to be the major cause of the bimetallic catalyst's activity.

Three hundred ten 12-wek-old laying quails (155 each) were randomly selected from the initial population and kept in individual battery cages. The measurements of growth and egg production were determined to derive RFI. The relationship between RFI and egg quality, blood parameters and carcass characteristics was also determined. The results indicated that the gray quails had significantly higher egg mass and lower broken eggs compared to the white quails. A significant increase for eggshell strength and shell % was found in eggs produced from gray quails compared to white counterparts, although the shell thickness was the same. The results of multiple regression analysis clearly identified a significant effect of metabolic body weight and egg mass in computing expected feed intake rather than body weight gain in both varieties of Japanese quails. Strongly positive correlation between RFI and feed intake in both gray and white quail varieties was found. The same trend was also observed for feed conversion ratio (FCR). Therefore, including RFI in selection criteria of Japanese quail to improve FCR under high environmental temperature is highly recommended.

Hadhramout Initiative Against Corona (HIAC ) formed a working group of clinicians relevant to the management of COVID-19 to formulate clinical practice guidelines (CPG) for clinicians caring for the patients infected with COVID-19 in Yemen. The regional guidelines on the management of COVID-19 were thoroughly reviewed and its applicability was assessed for Yemen. HIAC’s recommendations covered (2) sections: the first one is the diagnosis, including case definition, risk stratification of the affected cases, investigations (prioritization of reverse transcription-polymerase chain reaction (RT-PCR) testing, D-dimer, chest x-ray, and chest computed tomography, while the second part covers the treatments (mainly Favipiravir, Remdesivir, Hydroxychloroquine, and Glucocorticoid, Anticoagulants, and Supportive measures). In conclusion, the adoption of cost-effective and evidence-based guidelines in Yemen will standardize the management of the patients infected with COVID-19 and protect both the patients and the health care workers from malpractice.

Dietary habits, including meal frequency, meal timing, and skipping meals, have been extensively studied due to their association with the development of non-communicable diseases (NCDs). This study describes dietary habits, meal timing, meal frequency, skipping meals, and late-night eating in Kuwaiti adults. The Kuwait National Nutrition Surveillance System data was utilized to reach the objectives of this study. The findings reveal that approximately 50% of the adults in Kuwait eat after 10 p.m., 29% skip breakfast, and 9.8% skip dinner. Furthermore, adults in Kuwait consume 4.4 meals per day on average. Women skip breakfast more often and have extended night fasting than men (p&lt;0.001). Married adults skip breakfast and dinner less than unmarried adults (p&lt;0.001). In conclusion, this descriptive study provides valuable insights into the dietary habits of Kuwaiti adults, emphasizing the importance of further investigating the association between meal timing, meal frequency, and the prevalence of NCDs in Kuwait.

Polyphenols, long-used components of medicinal plants, have drawn great interest in recent years as potential therapeutic agents because of their safety, efficacy, and wide range of biological effects. Approximately 74% of the world's population still uses plant-based medicines, indicating the ongoing significance of phytochemicals for human health. The study emphasizes the growing body of research examining the role of polyphenols in uncovering their anti-adipogenic and anti-obesity properties. Functions of polyphenols including phenylpropanoids, flavonoids, terpenoids, alkaloids, glycosides, and phenolic acids are distinct due to changes in chemical diversity, and structural characteristics. This review methodically investigates the mechanism of how naturally occurring polyphenols mediate obesity and metabolic function. To this end, hormonal control of hunger has the potential to inhibit pro-obesity enzymes such as pancreatic lipase, the promotion of energy expenditure, and the modulation of adipocytokine production. Specifically, polyphenols affect insulin, a hormone that is essential for regulating blood sugar, and they also play a role in part in a complex web of factors that affect the progression of obesity. This review also explores the immunomodulatory properties of polyphenols, providing insight into their ability to improve immune function. The effects of polyphenols on gut health, improving the number of commensal bacteria, cytokine production suppression, and immune cell mediation, including natural killer cells and macrophages. Taken together, continuous studies are required for prudent and precise mechanisms underlying polyphenols' therapeutic potential in obesity and immunomodulation. In the interim, this review emphasizes the holistic approach to health and promotes the consumption of a wide range of foods and drinks high in polyphenols. This review lays the groundwork for future developments, indicating that the components of polyphenols and their derivatives may provide the answer to urgent worldwide health issues. This compilation of the body of knowledge paves the way for future discoveries in the global treatment of pressing health concerns in obesity and metabolic diseases.

Aluminum wire is a common material for wire bonding due to its resistance to oxidation and low price. It does not melt when becoming a free air ball (FAB) during the electronic flame-off (EFO) process with wettability, and is applied by wedge bonding. This study used 20μm Zn-Coated Al-0.5wt.%Si (ZAS) wires to improve the FAB shape after the EFO process, while maintaining stability of the mechanical properties, including the interface bonding strength and hardness. In order to test circuit stability after ball bonding, the current-tensile test was performed. During the experiment, it was found that 80nm ZAS with wire bonding has lower resistance and higher fusing current. For the bias tensile test, the thicker Zn film diffused into the Al-Si matrix easily, after which the strength was reduced. The ball-bond interfaces had no change in their condition before and after the bias. Accordingly, ZAS could be a promising candidate for ball bonding in the future.

Viruses are the most common congenital infections and an important cause of fetal malformations, morbidity, and mortality. The effects of these infections, which are transmitted in-utero (transplacentally), during childbirth or in the puerperium depend on the timing of the infections. These vary from miscarriages (usually with infections in very early pregnancy), congenital malformations (where the infections occur during organogenesis) and morbidity (with infections occurring late in pregnancy, during childbirth or after delivery). The most common of these viruses are cytomegalovirus, hepatitis, parvovirus B-19, rubella, varicella and zika. There are currently very few efficacious antiviral agents licensed for use in pregnancy and therefore for most of these infections, prevention by means of immunisation (where there is a vaccine), administration of immunoglobulins to those exposed to the virus to offer passive immunity or appropriate measures to avoid being infected would be options to minimise the infections and their consequences. In this review, we discuss the current understanding of some of the congenital infections and their consequences on both the mother and fetus and their management focusing mainly on prevention.

Background: Antimicrobial Stewardship Programs (ASP) were introduced in healthcare as a public health priority to promote appropriate prescribing of antimicrobials, reduce antimicrobials adverse events as well as control challenges of antimicrobial resistance. To deliver aimed outcome objectives, ASPs involve multiple implementation measures. A review of systematic review was conducted to evaluate ASPs process and outcome measures. Guided by PRISMA frames, published systematic reviews (SR) focusing on ASPs restricted to secondary healthcare were evaluated over the past 10 years by examining major and primary databases involving all age groups. Out of 265 identified SR studies, 63 met inclusion criteria, the majority were conducted in European and North American regions. All age groups were examined in the studies but mainly conducted in adults when compared to children and infants . Both ASPs process and outcomes measures were examined equally and simultaneously through 25 different concepts, dominated by efficacy , antimicrobial resistance , and economic impact while information technology as well as role of pharmacy and behavioural factors were equally examined . The main broad conclusions from the review , that across the globe, ASPs demonstrated effectiveness, proved efficacy, and confirmed efficiency while focused evaluation advocate that developed countries should target medium and small sized hospitals while developing countries should continue rolling ASPs in their healthcare facilities . Additionally , the future of ASPs should focus on embracing evolving information technology to bridge gaps in knowledge, alter attitude and enhance decision making .

This study explores the dynamics of liquid holdup in a lab-scale co-current two-phase upflow moving packed bed reactor, specifically examining how superficial gas velocity influences the line average external liquid holdup at a fixed superficial liquid velocity. Utilizing Gamma-ray Densitometry (GRD) for precise measurements, this research extends to determining line average internal porosity within catalyst particles and the overall external bed porosity. Conducted with an air-water system within a bed packed with 3 mm extrudate porous particles, the study presents a novel methodology to calculate liquid holdup, grounded in Beer–Lambert's law. Findings reveal a decrease in liquid holdup corresponding with increased superficial gas velocity across axial and radial locations, with a notable transition from bubbly to pulse flow regime at a critical velocity of 3.8 cm/sec. Additionally, the lower sections of the packed bed exhibited higher external liquid holdup compared to the middle sections at varied gas velocities. The liquid holdup distribution appeared uniform at lower flow rates, whereas higher flow rates favored the middle sections.

This paper presents the deformation of the joined sheet after the clinch-riveting process. The DX51D steel sheet with zinc coating was used. The samples to be joined with clinch riveting technology had a thickness of 1±0.05 mm and 1.5±0.1 mm. The sheet deformation was measured before and after the joining process. The rivet was pressed in the sheets with the same dimension between the rivet axis and three sheet edges: 20, 30 and 40 mm. For fixed segments of the die, from the rivet side close to the rivet, the sheet deformation was greater than that of the area with movable segments. The movement of die sliding element caused more sheet material to flow in the space between the fixed part of the die and movable segments. Hence, the sheet deformation in these places was smaller than for the die fixed element – sheet material was less compressed. For sheets thickness 1.5 mm and width 20 mm, the bulk of the sheet was observed. For a sheets width of 20 mm, it was observed that the deformation of the upper and lower sheets in the area of the rivet is greater than for sheets width of 30 or 40 mm.

Generative artificial intelligence tools are flourishing across various sciences, particularly in the educational domain. ChatGPT, with its versions 3.5 and 4.0, stands out for its multilingual capabilities, catering to both students and educators. This research aimed to evaluate the performance differences between these versions, and importantly, to compare the accuracy of ChatGPT's responses in English versus Arabic. In our study, we presented ChatGPT with 39 chemistry problems related to 6th-7th grade curriculum, including twenty-five open questions and fourteen multiple-choice questions. Each response was categorized as accurate, partially accurate, or inaccurate. Our analysis, focused on trends across versions and languages, revealed significant enhancements in version 4.0, particularly in its ability to process Arabic. However, despite these improvements, our findings indicate that responses in English consistently outperformed those in Arabic in terms of accuracy. In light of this discrepancy, we suggest that ChatGPT either incorporates additional Arabic databases into its training regimen or develops a code that adopts the following strategy to ensure more accurate responses in science education: questions should first be translated from Arabic to English, addressed, and then retranslated into Arabic before being presented to the user. This approach takes advantage of the greater accuracy of responses in English to benefit Arabic-speaking users, and it may also improve outcomes for speakers of other languages who experience less precise answers in the fields of chemistry or science education.

Use of MS Excel as a platform for teaching simple iterative solution of partial differential equations runs into issues of reliability of the computation because of the large number of calculations required. This article documents the problem and an empirical solution. The cause of this unreliability was found by detailed examination of the numerical results from three simultaneous iterations. Computers of several types from different manufacturers were found to fail occasionally in updating variables in the numerical iteration. A simple work-around is suggested and was tested on several platforms.

Cancer is currently the second leading cause of death worldwide, second only to ischemic heart disease, with approximately 8.97 million estimated deaths. However, projections indicate that it is expected to surpass heart disease and become the leading cause of death by 2060. Lung, liver, and stomach cancer are the deadliest malignancies in the general population, while lung and breast cancer predominate as the primary causes of cancer-related death in men and women, respectively. Apart from conventional treatments, there is a growing interest in exploring plant-based drugs for cancer management. Elaeagnus angustifolia, a medicinal plant with a history of traditional use in various cultures for its therapeutic properties, has recently garnered attention as a potential cancer treatment due to its reported anti-cancer effects. This review article aims to comprehensively summarize the current research on Elaeagnus angustifolia and its therapeutic applications in cancer. It delves into in vitro studies investigating the plant's interactions with cancer cells, uncovering mechanisms such as apoptosis induction, cell cycle arrest, and modulation of signalling pathways. In addition to in vitro research, the review evaluates in vivo and preclinical studies assessing the safety and efficacy of Elaeagnus angustifolia in animal models, emphasizing the promising outcomes and underscoring the need for well-designed clinical trials to validate its potential benefits in human cancer patients. The review provides valuable insights into the current research on Elaeagnus angustifolia's role in cancer treatment. It underscores the necessity for further investigations, including clinical trials, to establish its safety, efficacy, and optimal use in cancer management.

Cooperative non-orthogonal multi access communication is a promising paradigm for the future wireless networks because of its advantages in terms of energy efficiency, wider coverage and interference mitigating. In this paper, we study the secrecy performance of a downlink cooperative non-orthogonal multi access (NOMA) communication system under the presence of an eavesdropper node. Smart node selection based on feed forward neural networks (FFNN) is proposed in order to improve the physical layer security (PLS) of a cooperative NOMA network. The selected cooperative relay node is employed to enhance the channel capacity of the legal users, where the selected cooperative jammer is employed to degrade the capacity of the wiretapped channel. Simulations of the secrecy performance metric namely the secrecy capacity ($C_S$) are presented and compared with the conventional technique based on fuzzy logic node selection technique. Based on our simulations and discussions the proposed technique outperforms the existing technique in term the of secrecy performance.

Because of lower solubility and considerable metabolism, vardenafil (VRD) bioavailability is 15 %. To get over this obstacle, this study aimed to increase the solubility, hasten the onset of action, and mask the unpleasant taste of VRD utilizing β-cyclodextrin (β-CD) and formulation of the inclusion complex as oral disintegrating tablets (ODTs). The solubility of the obtained complexes in various ratios has been studied. A Box-Behnken design (BBD) was utilized to investigate the influence of excipients on the quality of ODTs. The solubility of VRD was improved at 1:2 drug: β-CD ratio. The formulated VRD-ODTs exhibited satisfying results regarding the hardness and disintegration time. In addition, in vivo taste masking and disintegration time showed improved results, after placing the tablets in the oral cavity of the healthy volunteers. The pharmacokinetic parameters for the optimized VRD–ODTs exhibited a significant improvement with P < 0.05 in the maximum plasma concentration and reduction in the time needed to reach this concentration when compared with the marketed tablets. Finally, the optimized VRD-ODTs exhibited increased oral absorption of VRD and subsequent decreasing the time of onset of clinical effect and masking the unpleasant taste, which is favored for patients with erectile dysfunction.

Water pollution with dyes is a critical environmental issue because off the huge amount of dyes disbarred annually which cause severe damage for the ecosystem and human life. On the other hand, the core-shell based magnetic materials have showed amazing character for controlling the material synthesis with targeted structure to enhance the adsorptive-removal of pollutants. Herein, Fe3O4 core-TiO2/mesoSiO2 and Fe3O4 core-mesoSiO2/TiO2 double shell nanoparticles were prepared by first (R1) and second (R2) routes. The preparation procedure is controlled to prepare the magnetic core with further coating layers from silica and titania for the uptake of methylene blue from aqueous solutions. The reported adsorption capacities for R1-0.2, R1-0.4 and R2 samples were 46, 38 and 50 mg/g respectively at pH 6 after 80 min contact time form 50 ppm methylene blue solution. The adsorption process of methylene blue onto Fe3O4core-meso SiO2/TiO2 double shell was well fitted with the pseudo-second-order kinetic model and Freundlish isotherm which suggested the quick and multilayer adsorption mechanism. In addition, results of thermodynamic investigation indicated that the surfaces of Fe3O4 core-mesoSiO2/TiO2 and Fe3O4 core-TiO2/mesoSiO2 double shell exhibit spontaneous tendency to adsorb methylene blue from the aqueous solutions. These results will encourage the further application of Fe3O4 core-meso SiO2/TiO2 and Fe3O4 core-TiO2/meso SiO2 double shell for removal of other dyes and pollutants from wastewater.

In modern automobiles, Infotainment High-Performance Computing (HPC) systems play a vital role in enhancing the capabilities of drivers and passengers by providing advanced features consisting of music, navigation, communication, entertainment, etc. However, as the use of information technology in vehicles increases, it results in cybersecurity threats such as data breaches and the loss of sensitive information. To improve the security of the infotainment system in automotive vehicles, the research conducted threat modeling at the component level using Microsoft’s STRIDE tool and performed risk assessment by using SAHARA (Safety-Aware Hazard Analysis and Risk Assessment) and DREAD methodologies to evaluate associated risks. It provides a systematic representation of threats, associated risks, and generic mitigation strategies to counter cybersecurity attacks. Through the threat modeling process, 34 potential security threats were identified. The study also provided a comparative analysis to calculate the risk values of the threats to prioritize for treatment. These identified threats and associated risks need to be considered to avoid potential cyberattacks, before deploying the infotainment HPC system in real-world automotive vehicles.

Biodiesel is considered valuable to reduce dependency on petro-fuels. This work aimed to synthesize biodiesel from Silybum marianum using synthesized ZnO nanoparticles as a catalyst. The synthesized ZnO nanoparticles were examined by scanning electron microscopy and X-ray diffraction for confirmation. The synthesized biodiesel was confirmed by ASTM D-6751, H and C-NMR, GC-MS, and FT-IR spectroscopy. The optimal biodiesel yield of 91% was obtained in the oil-to-methanol ratio of 1:24, 15 mg of catalyst concentration, 60 0C temperature, and 45 minutes of reaction time. Fuel properties were determined according to the ASTM defined methods and found within the defined limits of ASTM D-6751. 1H-NMR and 13C-NMR showed characteristic peaks at 3.667 ppm, 2.000 to 2.060 ppm, 0.858-0.918 ppm, 5.288-5.407 ppm, 24.93-34.22 ppm, 172.71, 173.12, 130.16 ppm, and 128.14 ppm, respectively, which confirm biodiesel synthesis. The FAMEs composition of biodiesel was determined by GC-MS which recognized 19 peaks for different types of FAMEs. FT-IR spectroscopy showed two main peaks, first in the range of 1725-1750 cm-1 and second in the range of 1000-1300 cm-1, which confirmed that the transesterification process was completed successfully. The physicochemical characteristics of Silybum marianum confirm that it is a suitable source to produce biodiesel on industrial scale.

This dissertation presents a method for the synthesis of substituted indoles bearing heterocyclic substituents onto the 3- position. The route for the synthesis of the heterocyclic substituents indoles starts from 3-acetyl indole nucleus depend on two parts. One part: Reaction of 3-acetylindole 1 with hydrazide compounds such as phenyl hydrazine, hydrazine hydrate, and thio-semicarbazide, to yield 3-(1-(2-phenylhydrazono) ethyl)-1H-indole 2, 3-(1-hydrazonoethyl)-1H-indole 6, and thiosemicarbazone 10 respectively. 3-(1-Hydrazonoethyl)-1H-indole 6 reacted with thiophene-2-carboxaldeyde, isatin and 3-acetyl indole. In the same way, 3-(1-(2-phenylhydrazono) ethyl)-1H-indole 2 reacted with thioglycollic acid, glycine and benzaldehyde. 3-Acetylindole 1 thiosemicarbazone reacted with acetic anhydride, piperidine, concentration of hydrochloric acid and thiophene-2-carboxaldeyde. Second part. Reaction of 3-acetyl indole 1 with amines compounds such as p-nitroaniline to formed Schiff base 15 which it reacted with thioglycollic acid to give compound 16. 3-Acetyl indole 1 reacted with ethylene diamine to afford bis imine indole to afford compound 17. The reports of this docking study revealed that the new compounds exhibit good antibacterial activity. The synthesized compounds screened in vitro for their antibacterial activity revealed remarkable inhibitory effects against the selected microorganisms. And also an anti-oxidant activity studying for some synthesized compounds. Structures of the newly synthesized compounds examination by spectral data (IR, 1H- NMR and 13C -NMR).

Mosquito-borne diseases (MBDs) are a group of illnesses transmitted by mosquitoes and can be caused by bacteria, viruses, or parasites. These diseases represent a significant global burden of infectious diseases, including morbidity and mortality. This systematic review delves into the multifaceted factors contributing to the spread of mosquito-borne diseases (MBDs) in the Middle East and North Africa (MENA) region. Following PRISMA guidelines, a thorough analysis of peer-reviewed articles from May 1990 to Jan 2023 was conducted, highlighting the interplay of population, environmental, disease, and mosquito factors in disease transmission and prevalence. The review incorporated 31 studies that revealed a complex relationship between various risk factors and the presence of MBDs. Significant associations were observed with age, certain occupations, environmental conditions such as rainfall and temperature, sanitation practices, specific pathogen variants, clinical symptoms, and Aedes aegypti mosquitoes. Conversely, gender, socioeconomic status, educational status, and certain sanitation-related factors showed inconsistent association with the spread of MBDs. The review underscores the need for targeted interventions, including vector control, improved sanitation, and educational campaigns to mitigate the spread of MBDs in the MENA region. This review could guide research studies to address data gaps and assist in developing effective surveillance programs in the MENA region. This work emphasizes the need for region-specific public health strategies and further research to understand and curb the burden of these diseases effectively.

Despite of being an exceptionally biodiversity rich country, the forest coverage of Bangladesh is declining at an alarming rate. Declaration and management of protected areas in this regard is one of the efforts from government side to tackle the loss of biodiversity. The limited numbers of forest-protected areas (FPA), established to conserve the dwindling forest biodiversity of the country with high pressure on them for timber, non-timber forest products, and fuelwood - makes their management challenging. Moreover, most of the FPAs of the country declared only in the recent decades with very limited infrastructure, manpower and policy support for monitoring and governance. Some people-centred approaches for the management of FPAs and alternative livelihood and income generation subsidies although made available through a few project interventions, their number are still inadequate and performance remains less than satisfactory. This chapter provides a critical review of the FPAs of Bangladesh looking at their role in biodiversity conservation, management challenges, and key lessons from previous management interventions with recommendations for the future. It has been revealed that the FPA system of Bangladesh still poorly represents the diverse forest ecosystems with relatively small forest size and lack of corridors for the movement of wildlife. There are ample opportunities to render co-management of FPAs an effective strategy to minimize the conflicts in FPAs management in the country. It is, however, important to ensure the access of local forest-dependent people to different alternative income generating options that may adequately support their livelihoods.

Three different populations of sulfated polysaccharides can be found in the cell wall of the red alga Botryocladia occidentalis. In a previous work, the structures of the two more sulfated polysaccharides were revised. In this work, NMR-based structural analysis was performed on the least sulfated polysaccharide and its chemically modified derivatives. Results have revealed the presence of both 4-linked α- and 3-linked β-galactose units having the following chemical features: more than half of the total galactose units are not sulfated, the α-units occur primarily as 3,6-anhydro-galactose units either 2-O-methylated or 2-O-sulfated, and the β-galactose units can be 4-O-sulfated or 2,4-O-disulfated. SPR-based results indicated weaker binding of the least sulfated galactan to thrombin, factor Xa, and antithrombin, but stronger binding to heparin cofactor II than unfractionated heparin. This report together with our previous publication completes the structural characterization of the three polysaccharides found in the cell wall of the red alga B. occidentalis and correlates the impact of their composing chemical groups with the levels of interaction with the blood co-factors.