Bitumen is produced from non-renewable natural resources, continuously deplete and intrigues researchers to look for alternative binders. Annually, tons of waste engine oil (WEO) and crumb rubber (CR) are discarded unsustainably and pose a significant environmental threat. Adding these industrial waste products to asphalt provides a safe and cost-effective way for their disposal and improves the bitumen's performance in parallel. This study uses various combinations of waste engine oil and crumb rubber with 60/70 penetration grade bitumen to produce a partially synthetic bitumen. Adhesion being one of the critical characteristics of the bituminous binder has been assessed using the bitumen bond strength test along with physical and rheological properties. Results showed that waste engine oil with crumb rubber inclusion increases penetration and decreases the softening point, viscosity, complex modulus, and bonding strength. Additionally, polyphosphoric acid (PPA) in smaller dosages was also incorporated into the optimum percentage of CR + WEO to improve the properties of the binder. The results confirm that binder modification with waste engine oil and crumb rubber can be more effective with PPA. It is concluded that 35% of waste can replace the virgin binder giving a cost-effective and environmentally friendly solution.

Purpose: To evaluate the efficacy and survival rates of same session ab interno trabeculectomy with the trabectome and Ahmed glaucoma valve implant (AT) in comparison to the Ahmed glaucoma valve alone (A). Method: A total of 107 eyes undergoing primary glaucoma surgery were enrolled in this retrospective comparative case series, including 48 eyes which underwent AT and 59 eyes which received A alone. Participants were identified using the procedural terminology codes, and their medical records were reviewed. The primary outcome measure was surgical success, defined as intraocular pressure (IOP) > 5 mmHg, ≤ 21 mmHg, and IOP reduction ≥ 20% from baseline at two consecutive visits after three months, no reoperation for glaucoma. Secondary outcome measures were IOP, the number of glaucoma medications, incidence of a hypertensive phase, and best corrected visual acuity (BCVA). Results: The cumulative probability of success at one year was 70% in AT, and 65% in A (p=0.85). IOP decreased significantly from 26.6 ± 10.1 mmHg at baseline to 14.7 ± 3.3 mmHg at the final follow-up in AT (p= 0.001). The corresponding numbers for A were 28.8 ± 10.2 and 16.7 ± 4.9, respectively (p= 0.001). The final IOP was significantly lower in AT (p= 0.022). The number of medications at baseline was comparable in both groups (2.6 ± 1.2 in AT and 2.5 ± 1.3 in A, p=0.851). Corresponding number at 1 year visit was 1.2±2 in AT and 2.8±1.8 in A (p=0.001). The incidence of a hypertensive phase was 18.7% in AT and 35.5% in A (p=0.05). HP resolved in only 30% of eyes. The criteria for HP resolution were fulfilled in 9 eyes (30%). There was no difference in the rate of resolution of the hypertensive phase between AT and A (33.3% and 28.5%, respectively, p=0.67). Conclusion: Ahmed glaucoma valve implant with same session trabectome surgery significantly decreased the rate of the hypertensive phase and postoperative IOP as well as the number of glaucoma medications.

A rare genetic disorder caused by col18.a1 mutations, inherited mostly in autosomal recessive and rarely in autosomal dominant pattern, giving rise to ocular abnormalities and other associated disorders, the condition is referred to as Knobloch syndrome. This paper overviews the anterior and posterior ocular symptoms in Knobloch patients, thus demonstrating the major findings in Knobloch cases including the mutational analysis which discusses the proteins involved and exon number on which mutations are detected. Animal modeling done by knocking out col18.a1 has also been discussed to determine the functions of this gene which have been identified based on anomalies found in knock-out mice.

Mucus plugging of the respiratory tract occurs in airway diseases, including asthma, chronic obstructive pulmonary disease and cystic fibrosis. It can cause blockage of airways, leading to breathlessness and lung failure. Here, we demonstrate the effect of BromAc® in dissolving mucus plugs in an novel ex-vivo ovine obstructive lung model using a ventilatory setup. Mucus simulant was filled into the trachea of freshly slaughtered ovine lungs and ventilated via an endotracheal tube (ETT) using Continuous Mandatory Ventilation. Predetermined single or repeated doses of Bromelain, Acetylcysteine (Ac), BromAc® and saline control were administered via an Aerogen® vibrating nebuliser and ventilated for 30 or 60 minutes. Ventilatory recording of resistance, compliance, tidal volume was conducted and rheology pre and post treatment were measured. A significant decline in airway resistance (p<0.0001) compared to saline control was observed when treated with Bromelain, Ac and BromAc®, with the latter showing a stronger mucolytic effect than single agents. The decline in resistance was also effective in shorter timepoint (p<0.05) at lower doses of the drugs. Changes in compliance, peak pressure and tidal volume was not observed post-administration of the drugs. Rheology measurements revealed that BromAc®™ significantly reduced the viscosity of the mucin at the end of 30-minute and 60-minute time points (p<0.001) compared to the saline control. BromAc® showed complete dissolution of the respiratory mucus simulant and improved ventilatory airflow parameters in the ex-vivo ovine model.

Automotive aerodynamics comprises of the study of aerodynamics of road vehicles. Its main goals are reducing drag, minimizing noise emission, improving fuel economy, preventing undesired lift forces and minimizing other causes of aerodynamic instability at high speeds. The Ahmed body has the form of a highly simplified car, consisting of a blunt nose with rounded edges fixed onto a box-like middle section and a rear end that has an upper slanted surface, the angle of which can be varied. It retains vital features of real vehicles in order to study the flow fields around it and the related turbulence models which characterizes the actual flow at elevated Reynolds number. In the present study, the aerodynamic behavior of this body is investigated numerically by the aid of commercial CFD tool: Ansys Fluent. The results of the simulation are validated with available experimental data and results of the simulations from other literatures. The numerical data were obtained for a fixed free stream velocity of 25 m/s at the inlet. The simulations were performed at a fixed slant angle of 25 degree and zero yaw angle. The present study focuses on how local refinement of mesh inside the concerned body and the outside, helps affect the results and for which grid dependency test is the primary objective of this paper. The present study also helps demonstrate how the drag of the body behaves, which is mainly the effect of pressure drag force generated at the rear portion of the body. The study also focuses on important properties like the velocity magnitude at different locations for different meshing cases, and to capture the flow pattern in the front or near the wake region. The study can be further helpful to future researchers in determining resistance, fuel efficiency etc. helping designers to optimize in specialized areas for better efficiency.

This paper outlines the detection procedure of intrusion as provided by Tripwire tool along-with the enhancement to be made in design and implementation to achieve the optimum performance level of Tripwire. It operates on effective and swift performance mechanism in order to report the system admin about the possible intrusion detected in the system with security assurance in cutting edge computer structures, which is very important in order to provide the integrity and reliability of information. In order to deal with this emerging issue in the historical research, the basic level of security is provided in the system by making enhancement in the existing tripwire tool for UNIX file system. The proposed methodological working of tripwire makes it more effective by adopting reliable and instantaneous mechanism to deal with specifically anomalies and unwanted access in the UNIX file system.

Aravalli Mountain Range is an example of erosional mountains, trending NE-SW, shows numerous faults and lineaments. Udaipur area, situated south-east part of the mountain, is considered as tectonically active. So the main objective is to study relative tectonic activity of the Ahar watershed of Udaipur, Rajasthan, India. To assess relative tectonic activity of the area, geomorphic indices such as stream length gradient index (SL), asymmetry factor (Af), basin shape (Bs), valley floor width to valley height ratio (Vf), mountain front sinuosity (Smf), hypsometic integral (Hi), hypsometric curve and transverse topographic symmetry factor (T) is applied. DEM (SRTM), Google earth image and enhanced image of Landsat TM (2008) is used to extract linear features. Result of these geomorphic indices of each sub-watersheds are used to divide area from low to high relative tectonic activity classes, expressed as relative tectonic active index (Iat) and according to Iat value the sub watershed UDSW2, 3 and 4 is tectonically relatively more active than remaining part of the area. Field validation associated with evidences highlighted by using geomorphic indices as well as stream deflrction and lineament analysis reveals that the Ahar watershed of Aravalli Range, particularly the north-western flank, is most affected by tectonic activity.

In this paper, we study the weak deflection angle using Gauss-Bonnet theorem and bounding greybody factor for electric and magnetic black holes in the background of nonlinear electrodynamics. Using Gibbons and Werner's approach, first we acquire the Gaussian optical curvature to use in Gauss-Bonnet theorem and calculate the bending angle for spherically symmetric electric and magnetic black holes in both non-plasma and plasma mediums in the weak field limits. Later, we calculate the rigorous bounds of the greybody factor for the given black holes. Furthermore, we look into the graphical behaviour of bending angles and greybody bounds at some specific values of multiple parameters as well as black holes charges. It is to be mention here that all the results for the electric and magnetic charged black holes solutions reduce into the Schwarzschild black hole solution in the absence of the black holes charges.

OCTA is an imaging modality used in the assessment of the retinal vasculature. It operates on the principle of coherence tomography used in standard OCT with the addition of delineating the retinal vascular. This provides a modern non-invasive retinal vascular imaging method compared to conventional dye-based imaging. High quality depth resolution of the superficial and deep capillary networks is possible on OCTA whereas this was not possible prior. OCTA may be limited by image quality degradation from factors such as motion artefact or media opacities, and therefore may not be the investigation of choice for all patient groups. There are multiple potential clinical applications for OCTA in retinal and choroidal vascular disease. Ongoing research is necessary to substantiate the more widespread use of OCTA due to its significant cost burden compared to current modalities.

The sustainable development of an area is highly dependable on reliable electrical energy supply. Microgrids are important in integrating distributed energy resources (DERs) using power electronic converters. However, microgrid control becomes challenging with the increasing number of distributed generators and loads. With the conventional droop control method, power contributions from DER converters cannot be accurately shared due to a mismatch of line impedances. In this paper, an augmented hierarchical control mechanism is proposed to solve the issues mentioned above. This hierarchical control mechanism consists of primary and secondary controllers. The primary stage utilized the droop controller to improve optimal power flow, mainly for the resistive network. The secondary stage is based on an improved methodology to compensate for the voltage and frequency variations during small and large signal disturbances. Moreover, the modelling and analysis for PMSG-based wind energy conversion systems are also presented. The response of the primary controller for the active and reactive power sharing is investigated. The analysis emphasizes the demonstration of optimal power-sharing under normal and abnormal conditions for the considered load. Finally, the suggested robust controller's performance is evaluated in MATLAB environment and simulation results show the proposed scheme's superiority under different operating conditions.

We explore the deflection angle in the framework of improved Schwarzschild Black hole utilizing the most advance geometrical path adopted by Gibbon-Werner. To investigate deflection angle of the photon ray by weak gravitational lensing for this black hole, we derive the optical curvature and perform the application of Gauss-Bonnet theorem on the optical metric. Moreover, we study the impacts of the plasma medium in context of the weak gravitational lensing in relate to this black hole. Further, we also study the graphical analysis of the deflection angle in both the plasma and non-plasma mediums. Also, we find the rigorous bound base upon the greybody factor for improved Schwarzschild black hole. A while later, we contrast our conclusions about deflection angle with the deflection angles of Schwarzschild black hole within plasma and non-plasma mediums.

In this article, we calculate the deflection angle of tidal charged black hole (TCBH) in weak field limits. First we obtain the Gaussian optical curvature and then apply the Gauss-Bonnet theorem on it. With the help of Gibbons-Werner method, we are able to calculate the light's deflection angle by TCBH in weak field limits. After calculating the deflection angle of light, we check the graphical behavior of TCBH. Moreover, we further find the light's deflection angle in the presence of plasma medium and also check the graphical behavior in the presence of plasma medium. Moreover, we investigate the shadow of TCBH.For calculating the shadow, we first find the null geodesics around the TCBH and then find its shadow radius. We also obtain TCBH's shadow in the plasma medium. Hence, we discuss the shadow of the TCBH using the $M87^{*}$ parameters announced by the Event Horizon Telescope.

In this paper, we examine the weak deflection angle and greybody factor of magnetized regular black hole. We implement the Gauss-Bonnet theorem on magnetized regular black hole to get the deflection angle. Moreover, we analyze the influence of plasma and non-plasma mediums on deflection angle of magnetized regular black hole. We observe the graphical behaviour of plasma and non-plasma mediums on deflection angle of magnetized regular black hole. Lastly, we study the rigorous bound phenomenon of the greybody factor of magnetized regular black hole. For this purpose we calculate greybody factor results and analyze the graphical behaviour of greybody bound for the different values of the parameters.

In this paper, we investigate the Hawking radiation process by using the quantum tunneling phenomenon of massive spin-1 (W-bosons) and spin-0 particles from (2+1) dimensional Black Hoke with quintessential and magnetic field. For this purpose, using Hamilton-Jacobi ansatz, we apply the WKB approximation to the field equations of massive charged vector particles. We get the required tunneling rate of radiated particles and obtain their corresponding Hawking temperature $T_h$. In order to study the quantum gravity effects, we utilize the generalized Proca and Klein-Gordan equations incorporating the generalized uncertainty principle (GUP) and recover the accompanying quantum corrected temperature $T'_{h}$.

In this project, our foremost intention is to analyze the angle of deflection of photon by NED black holes with many horizons in the context of non-linear electrodynamics. For the accomplishment of our intention at first we manipulated the optical metric of the desired black holes for the calculation of Gaussian curvature. After that, the angle of deflection in leading orders is attained from the desired black holes in weak field limit by using the famous Gauss-Bonnet theorem. Moreover, we evince the effect of plasma medium on the angle of deflection. At last, the graphical impact of the angle of deflection for NED black holes with many horizons is examined with respect to black hole charge and impact parameter in both the plasma and non plasma medium. In addition, we discuss the rigorous bound for grey body factor of the desired black hole and also observer its graphical behavior.

In this paper, we calculate the deflection angle of photon by Casimir wormhole in the weak field limit approximation. First we calculate Gaussian optical curvature with the help of optical spacetime geometry and so we use the Gauss-Bonnet theorem on the Gaussian optical metric. Then we find the deflection angle of photon by Casimir wormhole. Moreover, we calculate the photon's deflection angle in the presence of plasma medium and we also see the graphical nature of deflection angle in both cases. Second, we move towards the shadow of Casimir wormhole. After the observations of Event Horizon Telescope, the study of shadow become very important so that we plot the shapes of shadow of Casimir wormhole, and we calculate the photon geodesic around the Casimir wormhole.

In this paper, we proposed a new model of non-linear electrodynamics with parameter. Firstly, we study the weak limit approximation and by using the Gauss Bonnet theorem, we obtain the deflection angle of photon from magnetized black hole and effect of bnon-linear electrodynamics. In doing so, we find the corresponding optical metric after that we calculate the Gaussian curvature which is used in Gauss Bonnet theorem. Then we show the deflection angle in the leading order terms. We also analyzed that our results reduces into Maxwell's electrodynamics and RN solution with the reduction of parameters. Moreover, we also investigate the graphical behavior of deflection angle w.r.t correction parameter, black hole charge and impact parameter.

Unusual outbreak of Covid 19 has put the whole new challenges around the globe. In a short span of time, the world has been changed, lifestyles, social events, cultural, political events everything has been put on hold as number of countries has enforced partial or complete lockdown that resulted positive in context of controlling spread and contamination of COVID-19. Such activities have also put some effects on environment in both positive and negative way. In this study only positive impacts of COVID-19 on Environment have been highlighted that played role in regeneration of natural systems i.e., reduced air emissions, cleaner air, beaches &water bodies, reduced noise levels, biodiversity rehabilitation etc.

In this paper, we analyze the deflection angle of light by Brane-Dicke wormhole in the weak field limit approximation to find the effect of the Brane-Dicke coupling parameter on the weak gravitation lensing. For this purpose, we consider new geometric techniques, i.e., Gauss-Bonnet theorem and optical geometry in order to calculate the deflection angle. Furthermore, we verify our results by considering the most familiar geodesic technique. Moreover, we establish the quantum corrected metric of Brane-Dicke wormhole by replacing the classical geodesic with Bohmian trajectories, whose matter source and anisotropic pressure are influenced by Bohmian quantum effects and calculate its quantum corrected deflection angle. Then, we calculate the deflection angle by naked singularities and compare with the result of wormhole's. Such a novel lensing feature might serve as a way to detect wormholes, naked singularities and also the evidence of Brane-Dicke theory.

In this work, we examine the deflection angle of black hole in effective loop quantum gravity in non-plasma medium via the geometrical technique of Gibbons and Werner in weak field limits. For this, we attain the optical metric and calculate the Gaussian optical curvature and then we apply the Gauss-Bonnet theorem. We also study the influence of the plasma and dark matter mediums on the deflection angle. Further, we obtain the deflection angle by using Keeton and Petters method. We also calculate the Hawking temperature via Gauss-Bonnet theorem. In addition, we determine the fermionic greybody bounds. Moreover, we discuss the graphical behaviour of the bending angle and bounds on the greybody factor. We also examine that the results obtained for the black hole in effective loop quantum gravity are reduces to the Schwarzschild black hole solutions when dimensionless non-negative parameter $A_{\lambda}=0$.

The objective of this paper is to analyze the weak deflection angle of Einstein-Gauss-Bonnet gravity in the presence of plasma medium. To attain our results, we implement the Gibbons and Werner approach and use the Gauss-Bonnet theorem to Einstein gravity to acquire the resulting deflection angle of photon's ray in the weak field limit. Moreover, we illustrate the behavior of plasma medium and non-plasma mediums on the deflection of photon's ray in the framework of Einstein-Gauss-Bonnet gravity. Similarly, we observe the graphical influences of deflection angle on Einstein-Gauss-Bonnet gravity with the consideration of both plasma and non-plasma mediums. Later, we observe the rigorous bounds phenomenon of the greybody factor in contact with Einstein-Gauss-Bonnet gravity and calculate the outcomes, analyze graphically for specific values of parameters.

The observed data of COVID-19 progression in Pakistan for first 50 days from the first patient been reported has shown quite an unusual trend which is in opposition to clear exponential spread pattern of any infectious disease. The data of positive cases of 50 days of disease progression has been collected from COVID-19 dashboard of Pakistan and analyzed to see the graphical trend and to forecast the behaviour of disease progression for next 30 days. Mathematical equations regarding exponential growth are used to analyse the disease progression and different possible trajectories are plotted to understand the approximate trend pattern. The possible projections estimated 20k-456k positive cases within 80 days of disease spread in Pakistan. Although, the disease progression pattern is not perfectly exponential, it is still threatening a major fraction of susceptible population and demands effective strategic planning and control.

In this era of technology, programming has become more significant than ever before. Python and C++ are both widely used programming languages. Python, the most popular programming language in today’s world, is a high-level object-oriented language whereas C++, the language behind most operating systems, is a low-level object-oriented language. In this paper, we present a comparative study of Python and C++. This paper discusses the introduction to these languages, their memory management techniques, and the reasons behind their program execution speed. Furthermore, we analyzed the execution time and memory used by multiple algorithms in both the languages with best, average, and worst cases. They are also compared with respect to the benefits and issues related to them. Results indicate that C++ is faster than Python in execution speed but Python serves as a better language for beginners due to its simplicity. Moreover, for the best results, the language should be selected according to the type of project.

This paper is given to the investigation of warm inflation using Modified Chaplygin gas in the background of locally rotationally symmetric Bianchi Identity type I. We find out the field equations and perturbations parameters such as; scalar power spectrum, scalar spectral index, scalar potential and tensor to scalar ratio under slow roll approximation. We find out these parameters in directional of Hubble parameter during the Logamediate inflationary regime in weak and strong case. These comological parameters shows that the anisotropic model is also compatible WMAP$7$ with recent observational data Planck $2018$.

This paper is devoted to compute the weak deflection angle for Kalb-Ramond traversable wormhole solution in plasma and dark matter mediums by using the method of Gibbons and Werner. To acquire our results, we evaluate Gaussian optical curvature by utilizing the Gauss-Bonnet theorem in the weak field limits. We also investigate the graphical influence of deflection angle $\tilde{\alpha}$ with respect to the impact parameter $\sigma$ and minimal radius $r_0$ in plasma medium. Moreover, we derive the deflection angle by using different method known as Keeton and Petters method. We also examine that if we remove the effects of plasma and dark matter, the results become identical to that of non-plasma case.

Standards are not only crucial for obtaining a certification for practical use, but also an essential guidance for inferring how and what to simulate as well test experimentally. This paper examines the potential applicability of existing standards from various domains, including aerospace and automotive, to Wing-Structure- Integrated high-pressure Hydrogen Tanks (SWITHs). It highlights the associated challenges and uncertainties, acknowledging the absence of a single, all-encompassing standard for SWITHs. We embark on an exploration aimed at identifying alternative standards that are best suited for SWITHs. The analysis scrutinizes existing standards that could potentially facilitate SWITH certification, with a particular focus on the inclusivity of externally loaded hydrogen tanks. Assessment criteria are established to filter standards that best meet the needs of SWITHs. Through this process, we identify two key standards that present themselves as the most promising alternatives. Moreover, we delineate the technical constraints involved in selecting the maximum nominal working pressure for high-pressure tanks intended for burst tests. Our findings reveal a current upper limit of 525 bar, imposed by the limitations of existing test facilities. The study underscores that these standards should serve as flexible guiding frameworks rather than rigid protocols, encouraging progressive development in the SWITH field.

In this work, we study gravitational lensing in the weak field limits and the shadow by charged black holes in non-linear electrodynamics corrections. To find the deflection angle in vacuum (non-plasma) up to the leading order terms, we compute the optical Gaussian curvature from optical metric and utilize the Gauss-Bonnet theorem by applying Gibbons and Werner’s technique. Also, we derive the bending angle in plasma and dark matter mediums and observe that the bending angle increases by increasing the effects of these mediums. Further, in vacuum and plasma mediums, we investigate the graphical behavior of the bending angle with respect to the impact parameter u and notice that the bending angle exponentially decreases. Moreover, we calculate the Hawking temperature using the Gauss-Bonnet theorem and compare it with a standard method of computing the Hawking temperature. Furthermore, we investigate the bound of the greybody factor and graphically examine that bound converges to the 1. We relate our obtained results with the results of black holes given in the literature. Finally, we have considered exploring the effect of NLED, plasma, and dark matter on the black hole’s shadow radius to broaden the study’s scope. Results for the shadow indicate that the three parameters give different deviations to the shadow radius. Interestingly, while plasma affects both the photonsphere and shadow, dark matter only influences the shadow.

In this paper, we study the deflection angle for wormhole-like static aether solution by using Gibbons and Werner technique in non-plasma, plasma and dark matter mediums. For this purpose, we use optical spacetime geometry to calculate the Gaussian optical curvature, then implement the Gauss-Bonnet theorem in weak field limits. Moreover, we compute the deflection angle by using a technique known as Keeton and Petters technique. Furthermore, we analyze the graphical behaviour of the bending angle ψ with respect to the impact parameter b, mass m as integration constant and parameter q in non-plasma and plasma mediums. We examine that deflection angle is exponentially increasing as direct with charge. Also, we observe that for small values of b, ψ increases and for large values of b the angle deceases. We also considered an analysis to the shadow cast of the wormhole relative to an observer at various locations. Comparing it the the Schwarzschild shadow, shadow cast is possible for wormhole as r<2m. At r>2m, the Schwarzschild is larger. As r → ∞, we have seen that the behavior of the shadow, as well as the weak deflection angle, approaches that of the Schwarzschild black hole. Overall, the effect of plasma tends to decrease the value of the observables due to the wormhole geometry.

Query reformulation is a fundamental task in information retrieval systems aimed at improving the accuracy and relevance of search results. This abstract presents a query reformulation approach that utilizes a domain-specific ontology to enhance the effectiveness of query reformulation. The use of ontology enables a more precise understanding of the domain and its associated concepts, leading to more accurate query interpretation and reformulation. The proposed approach consists of two main steps: ontology-based query interpretation and ontology-guided query expansion. The proposed approach use Power thesaurus tool that perform sentiment analysis for suggestion of the synonyms of the query words to improve the accuracy of the retrieved results. The proposed methodology gives high accuracy as compared to the previous approaches that used Wordnet for the suggestions of synonyms. The proposed approach demonstrates the potential of utilizing ontologies in query reformulation, offering a more accurate and context-aware search experience in domain-specific information retrieval systems.

In this paper, we study light rays in a Kazakov-Solodukhin black hole. To this end, we use the optical geometry of the Kazakov-Solodukhin black hole within the Gauss-bonnet theorem. We first show the effect of the deformation parameter $a$ on the Gaussian optical curvature, and then we use the modern method popularized by Gibbons and Werner to calculate the weak deflection angle of light. Our calculations of deflection angle show how gravitational lensing is affected by the deformation parameter $a$. Moreover, we demonstrate the effect of a plasma medium on weak gravitational lensing by the Kazakov-Solodukhin black hole. We discuss that the increasing the deformation parameter $a$, will increase the weak deflection angle of the black hole. Our analysis also uncloak how one may find a observational evidence for a deformation parameter on the deflection angle.

In this work, generalized geometry of second-order tangent groups and affine configuration complexes is proposed. Initially, geometry for higher weights n=4 and weights n=5 is presented through some interesting and suitable homomorphisms, finally, this geometry is extended and generalized for any weight n.

In this work, we investigate the weak deflection angle of light from exact black hole within the non-linear electrodynamics. First we calculate the Gaussian optical curvature using the optical spacetime geometry. With the help of modern geometrical way popularized by Gibbons and Werner, we examine the deflection angle of light from exact black hole. For this desire, we determine the optical Gaussian curvature and execute the Gauss-Bonnet theorem on optical metric and calculate the leading terms of deflection angle in the weak limit approximation. Furthermore, we likewise study the plasma medium's effect on weak gravitational lensing by exact black hole. Hence we expose the effect of the non-linear electrodynamics on the deflection angle in the weak gravitational field.

In this work, we study the weak gravitational lensing in the background of Kerr-Newman black hole with quintessential dark energy. Initially, we compute the deflection angle of light by charged black hole with quintessential dark energy by utilizing the Gauss-Bonnet theorem. Firstly, we suppose the light rays on the equatorial plane in the axisymmetric spacetime. In doing so, we first find the corresponding optical metrics and then calculate the Gaussian optical curvature to utilize in Gauss-Bonnet theorem. Consequently, we calculate the deflection angle of light for rotating charged black hole with quintessence. Additionally, we also find the deflection angle of light for Kerr-Newman black hole with quintessential dark energy. In order to verify our results, we derive deflection angle by using null geodesic equations which reduces to the deflection angle of Kerr solution with the reduction of specific parameters. Furthermore, we analyze the graphical behavior of deflection angle $\Theta$ w.r.t to quintessence parameter $\alpha$, impact parameter $b$, BH charge $Q$ and rotation parameter $a$. Our graphical analysis retrieve various results regarding to the deflection angle by the Kerr-Newman black hole with quintessential dark energy.

In this paper, we are interested in a model of exact asymptotically flat charged hairy black holes in the background of dilaton potential. We study the weak gravitational lensing in the spacetime of hairy black hole in Einstein-Maxwell theory with a non-minimally coupled dilaton and its non-trivial potential. In doing so, we use the optical geometry of the flat charged hairy black hole for some range of parameter $\gamma$. For this purpose, by using Gauss-Bonnet theorem, we obtain the deflection angle of photon in a spherically symmetric and asymptotically flat spacetime. Moreover, we also investigate the impact of plasma medium on weak gravitational lensing by asymptotically flat charged hairy black hole with a dilaton potential. Our analytically analyses show the effect of the hair on the deflection angle in weak field limits.

In this paper, we argue that one can calculate the weak deflection angle in the background of Einstein-Maxwell-Dilaton-Axion black hole using the Gauss-Bonnet theorem. To support this, the optical geometry of the black hole with the Gibbons-Werner method are used to obtain the deflection angle of light in the weak field limits. Moreover, we investigate the effect of a plasma medium on deflection of light for a given black hole. Because of dilaton and axion are one of the candidate of the dark matter, it can give us a hint on observation of dark matter which is supported the black hole. Hence we demonstrate the observational viability via showing the effect of the dark matter on the weak deflection angle.

Developing countries like Pakistan is among those where lack of adoption to science and technology advancement is a major constraint for Satellite Remote Sensing use in crops and land use land cover digital information generation. Exponential rise in country population, increased food demand, limiting natural resources coupled with migration of rural community to urban areas had further led to skewed official statistics. This study is an attempt to demonstrate the possible use of freely available satellite data like Landsat8 under complex cropping system of Okara district of Punjab, Pakistan. An Integrated approach has been developed for the satellite data based crops and land use/cover spatial area estimation. The resultant quality was found above 96% with Kappa statistics of 0.95. Land utilization statistics provided detail information about cropping patterns as well as land use land cover status. Rice was recorded as most dominating crop in term of cultivation area of around 0.165 million ha followed by autumn maize 0.074 million ha, Fallow crop fields 0.067 million ha and Sorghum 0.047 million ha. Other minor crops observed were potato, fodder and cotton being cultivated on less than 0.010 million ha. Population settlements were observed over an area of around 0.081 million ha of land.

Salmonella enterica includes enteric pathogens of zoonotic potential, possessing one of the largest pools of temperate phages in their genomes. One such class of phages previously called Podoviridae (Now genera placed directly under class Caudoviricetes temporarily) is the largest group of temperate phages that lysogenize clinically and economically important Salmonella enterica serovars. These phages are capable of generalized transduction and are well known for carrying foreign DNA (mobile genetic elements and resistance genes) to new bacterial species that play a major role in the evolution, pathogenicity, and host adaptability of Salmonella serovars. Here we report a novel species of podo viruses; Salmonella phage BIS08P22 (BIS08) that infects Salmonella enterica serovar Typhimurium strain SE-BS17 (Acc. NO: MZ503545). Phage BIS08 was viable only at biological pH and temperature (pH7 and 37 °C) and features 41,574 -base pair (bp) linear ds DNA genome with 47% GC content. It encodes 73 putative Open Reading Frames (ORFs), has a mosaic arrangement, and shares only 16 core genes with its closest homologs. BIS08 genome possesses only 52 % homology (genome-wide Nucleotide homology by VIRIDIC analysis) with members of the genus Lederbergvirus which is not sufficient to place it in the same genus. This phage has a unique terminase enzyme (DNA packaging motor) with no nucleotide and protein homology with any known member of the Lederbergvirus genus. We carried out a detailed phylogenetic and genome analysis of this novel phage and proposed its placement in a new genus. Our study also suggests a revision in the classification of the genus Lederbergvirus. We also performed in silico structural analysis of the BIS08 unique terminase enzyme comparing it to its close homologs.

In this article, we demonstrate the weak gravitational lensing in the context of Bocharova-Bronnikove-Melnikov-Bekenstein (BBMB) black hole. To this desire, we derive the deflection angle of light in a plasma medium by BBMB black hole using the Gibbons and Werner method. First, we obtain the Gaussian optical curvature and implement the Gauss-Bonnet theorem to investigate the deflection angle for spherically symmetric spacetime of BBMB black hole. Moreover, we also analyze the graphical behavior of deflection angle by BBMB black hole in the presence of plasma medium.

In this article, we analyze the weak gravitational lensing in the context of Einstein-non-linear Maxwell-Yukawa black hole. To this desire, we derive the deflection angle of light by Einstein-non-linear Maxwell-Yukawa black hole using the Gibbons and Werner method. For this purpose, we obtain the Gaussian optical curvature and implement the Gauss-Bonnet theorem to investigate the deflection angle of Einstein-non-linear Maxwell-Yukawa black hole. Moreover, we derive the deflection angle of light in the presence of plasma medium. We also analyze the graphical behavior of deflection angle by Einstein-non-linear Maxwell-Yukawa black hole in the presence of plasma as well as non-plasma medium.

This paper presents an Application Based Active Learning (ABAL) methodology on Power Electronics (PE) and Electric Machines (EM) as a hybrid laboratory course for the undergraduate students to design and implement the real-world engineering problems. The ABAL is a type of active learning which is a branch of Learner-centered teaching (LCT). The DC/DC converter along with the speed control of DC separately excites the motor. In addition, a DC/AC converter is designed to control the speed of an induction motor. The results are then investigated on a hardware platform under the ABAL experimental methodology. This paper also discusses the problem identification selection of the equipment, circuit design, hardware mounting and critical analysis of the results acquired from the hybrid laboratory. The ABAL methodology was evaluated based on student satisfaction, feedback, grades and interest to solve the real-world problem rather than cramming the engineering concepts and fulfill so-called lab routine and tasks

With the increase of the Artificial Neural Network (ANN), machine learning has taken a forceful twist in recent times. One of the most spectacular kinds of ANN design is the Convolutional Neural Network (CNN). The Convolutional Neural Network (CNN) is a technology that mixes artificial neural networks and up to date deep learning strategies. In deep learning, Convolutional Neural Network is at the center of spectacular advances. This artificial neural network has been applied to several image recognition tasks for decades and attracted the eye of the researchers of the many countries in recent years as the CNN has shown promising performances in several computer vision and machine learning tasks. This paper describes the underlying architecture and various applications of Convolutional Neural Network.

The architecture, Engineering, and Construction (AEC) industry is dealing with serious challenges on a global scale, i.e., project delays, budget overruns, and insufficient stakeholder collaboration. In this context, Value Engineering (VE) and Building Information Modeling (BIM) have been used recently to address these challenges and cope with large-scale and complex construction projects. An extensive body of literature highlights significant advantages of integrated VE within BIM technology. Despite this, it is full practical potential has not yet been realized. For this reason, this paper aims to investigate the integration of Value Engineering (VE) and Building Information Modeling (BIM) within a Common Data Environment (CDE) for the Architecture, Engineering, and Construction (AEC) industry. In doing this research, a comprehensive framework was developed and systematically implemented into practice through the use of four interconnected modules: (M. 1); Creating CDE, (M. 2); Design BIM Model Development, (M. 3); Value Analysis / Engineering Model, and (M. 4); Value Engineering Study. Introducing a new term the ""VEIDEA"" databank based on the OmniClass classification system provides a structured database utilized to store, manage, and accumulate VE ideas. Moreover, the study incorporates the Analytical Hierarchy Process (AHP) to automate the evaluation phase. Such a framework seeks to assist designers and VE team members make informed decisions when choosing appropriate design alternatives. Lastly, a case study method was adopted to examine the proposed framework for an office building. Quantitative data showed a significant link between cost savings and VR integration with BIM technology. For instance, cost of the RC slabs dropped by 20%, while flooring materials cost dropped by a 39%. Empirically, evidence from the case study supports literature regarding t the potential for significant enhancements in both cost-effectiveness and overall project performance through this innovative integration. In the context of knowledge contribution, this study provides an innovative way to assist designers and VE team members in making well-informed decisions when choosing appropriate design alternatives.

In this digital era, online learning and teaching is an important platform for college and university learners which required many technical facilities and in depth knowledge to have learning process effectively. Students and teachers in Higher Education Institutions (HEIs) were forced to grapple with the inevitability of shifting to online classes due to the advantages of effective distance learning or for large learning group. In the case of Oman, there have been some efforts to integrate alternative learning mechanisms such as online and mobile education in the past but not followed the scale in the post pandemic world. This study seeks to utilize the principles of Total Quality Management (TQM) through the implementation of Quality Function Deployment (QFD) as a way to better understand the experiences of Omani teachers and students from HEIs. A voice of customer from teachers and students have been collected and recorded. In this regard, 165 staff and 355 students from HEIs of Engineering participated in the survey. After the survey, a house of quality analysis was done to analyze the requirements based on how strongly they are related to the standard learning outcomes expected from HEIs in Oman. The results show that more attention is required in online education in the Sultanate of Oman before it is implemented as a major part in learning and teaching.

This research focuses on exploring gravitational lensing of the wormhole in Einstein-bumblebee gravity with an antisymmetric tensor. The Gibbons and Werner technique based on the Gauss-Bonnet theorem is utilized to calculate the bending angle of light. The effects of non-plasma and plasma medium on the bending angles are investigated. Furthermore, we examine the deflection angle $\Tilde{\alpha}$ in relation to the impact parameter $\sigma$ and minimal radius $r_{0}$ in both non-plasma and plasma mediums. Our findings indicate that the deflection angle is positively correlated with $r_{0}$, meaning that larger values of $r_{0}$ result in larger deflection angles and smaller values of $r_{0}$ result in smaller deflection angles. On the other hand, the deflection angle $\Tilde{\alpha}$ is inversely related to the impact parameter $\sigma$.

The main goal of this paper is to study the weak gravitational lensing by Horndeski black hole in weak field approximation. In order to do so, we exploit the Gibbons-Werner method to the optical geometry of Horndeski black hole and implement the Gauss-Bonnet theorem to accomplish the deflection angle of light in weak field region. Furthermore, we have endeavored to extend the scale of our work by comprising the impact of plasma medium on the deflection angle as properly. Later, the graphical influence of the deflection angle of photon on Horndeski black hole in plasma and non-plasma medium is examined.

The principal objective of this project is to investigate the gravitational lensing by asymptotically flat black holes in the framework of Horndeski theory in weak field limits. To achieve this objective, we utilize the Gauss-Bonnet theorem to the optical geometry of asymptotically flat black holes and applying the Gibbons-Werner technique to achieve the deflection angle of photons in weak field limits. Subsequently, we manifest the influence of plasma medium on deflection of photons by asymptotically flat black holes in the context of Horndeski theory. We also examine the graphical impact of deflection angle on asymptotically flat black holes in the background of Horndeski theory in plasma as well as non-plasma medium.

This paper is devoted to investigate charged vector particles tunneling via horizons of a pair of accelerating rotating charged NUT black hole under the influence of quantum gravitational effects. For this purpose, we use the modified Proca equation incorporating generalized uncertainty principle. Using the WKB approximation to the field equation, we obtain a modified tunneling rate and the corresponding corrected Hawking temperature for this black hole. Moreover, we analyze the graphical behavior of corrected Hawking temperature T'_H with respect to the event horizon for the given black hole. By considering quantum gravitational effects on Hawking temperatures, we discuss the stability analysis of this black hole. For a pair of black holes, the temperature T'_H increases with the increase in rotation parameters α and w, correction parameter β, black hole acceleration α and arbitrary parameter k and decreases with the increase in electric e and magnetic charges g.

In this paper, we analyze the Hawking radiation phenomenon for types of Banados-Teitelboim-Zanelli-like (BTZ-like) black holes. For this purpose, using the Hamilton-Jacobi method, we consider semi-classical WKB approximation to calculate the tunneling probabilities of massive boson particles. For these particles, we use the equation of motion for the Glashow-Weinberg-Salam model. Using quantum tunneling process of charged massive bossons, we compute the corresponding Hawking temperatures. Furthermore, we discuss the effects of rotation parameter on tunneling probability and temperature.

Purpose: To compare the efficacy and safety of graft-free short tunnel small flap (STSF) technique with that of scleral patch graft (SPG) in Ahmed glaucoma valve (AGV) implantation. Design: Randomized clinical trial. Participants: Eighty-eyes of eighty patients with medically uncontrolled glaucoma including 41 in STSF and 39 eyes in SPG. Methods: Patients were enrolled and assigned randomly to STSF or SPG. Main Outcome Measures: tube exposure, Intraocular pressure (IOP), number of glaucoma medications, best corrected visual acuity (BCVA), surgical complications, and success rate ( defined as intraocular pressure (IOP) >5 mmHg, ≤21 mmHg, and IOP reduction ≥20% from baseline at two consecutive visits after three months, no reoperation for glaucoma). Results: only one case in SPG developed tube exposure at 1-year follow-up. The cumulative probability of success during the first year of follow-up was 70% in the STSF and 65% in SPG (P = 0.36). IOP decreased significantly from 29.6 ± 8.6 mmHg at baseline to 16.4 ± 3.6 mmHg at the final follow-up in STSF (p = 0.001). The corresponding numbers for SPG were 30.9 ± 11.2 and 15.8 ± 4.7, respectively (p = 0.001). The final IOP was comparable between both groups (p = 0.65). Mean ± standard deviation of the number of glaucoma medications was 1.8 ± 0.9 in STSF and 1.6 ± 0.9 in SPG at final follow-up (P = 0.32). Postoperative complications developed in 8 patients (19%) in STSF and 9 patients (23%) in SPG (P = 0.81). Conclusions: STSF and SPG techniques had comparable complication rate at one-year follow-up. Both techniques were comparable in terms of success rate, postoperative IOP, and glaucoma medications.

Pancreatic ductal adenocarcinoma (PDAC) is one of the leading causes of cancer-related death worldwide. It is commonly diagnosed in advanced stages and therapeutic interventions are typically constrained to systemic chemotherapy, which yields only modest clinical outcomes. In this review, we examine recent developments in targeted therapy tailored to address distinct molecular pathway alteration required for PDAC. Our review delineates the principal signaling pathways and molecular mechanisms implicated in the initiation and progression of PDAC. Subsequently, we provide an overview of prevailing guidelines, ongoing investigations, and prospective research trajectories related to targeted therapeutic interventions, drawing insights from randomized clinical trials and other pertinent studies. This review focus on a comprehensive examination of preclinical and clinical data substantiating the efficacy of these therapeutic modalities, emphasizing the potential of combinatorial regimens and novel therapies to enhance the quality of life for individuals afflicted with PDAC. Lastly, the review delves into the contemporary application and ongoing research endeavors concerning targeted therapy for PDAC. This synthesis serves to bridge the molecular elucidation of PDAC with its clinical implications, the evolution of innovative therapeutic strategies, and the changing landscape of treatment approaches.

Low dropout (LDO) regulators are widely used in portable electronic devices because they 1 occupy small chip and printed circuit board (PCB) areas. This work presents the design of a low 2 noise low dropout (LDO) linear voltage regulator using folded cascode operational amplifier and 3 source follower buffer for frequency compensation. The proposed design achieves low output noise 4 with feedback loops, which makes it possible to improve load and line regulations as well as the 5 transient response for voltage applications in comparison with the literature. The designed LDO 6 linear regulator works under the input voltage of 2.8-4.8 V and provides up to 100 mA load current 7 for an output voltage of 2.6 V. 8 9 Moreover, the operational amplifier design contributes to the major reduction in the frequency 10 noise, and make sure the stability of LDO under different conditions. Furthermore, the novel LDO 11 design topology has very less dropout voltage, fast transient response and minimized power dissi- 12 pation under maximum load current, worst process corner, and maximum temperature to achieve 13 high power efficiency, maintain output voltage in the presence of fast load changes, and to lower the 14 power loss across the pass element especially at high load. Design criteria are addressed in detail. 15 16 This LDO topology is able to achieve ultra-low noise i.e. 2 /muv/√Hz for frequency >1kHz. The 17 proposed LDO is implemented in the cadence virtuoso H9A with CMOS 130 μm technology.

The study presents the synthesis and characterization of dual-layer sulfonated polyphenylenesulfone (SPPSu) nanocomposite hollow fiber nanofiltration membranes incorporating titanium dioxide (TiO2) nanoparticles using the phase inversion technique. The newly developed membranes were systematically characterized using advanced tools and methods to evaluate their properties and performance. The study focused on investigating the effects of TiO2 addition in the SPPSu inner layer on pure water permeability, and salt rejection. The nanocomposite hollow fiber nanofiltration membranes exhibited a significant enhancement in pure water permeability, with a three-fold increase compared to the pristine membranes, achieving a flux of 5.4 L/m2h.bar. The addition of TiO2 also led to an improvement in the mechanical properties of the membranes, as evidenced by the increase in the expected tensile strength from 2.4 to 3.9 MPa. To evaluate the salt rejection performance, rejection tests were conducted using a laboratory-scale filtration setup in recycle mode. Aqueous solutions containing different divalent ions, specifically magnesium sulfate (Mg2SO4) and sodium sulfate (Na2SO4) at a concentration of 500 ppm, were used as the feed solution. The modified dual-layer hollow fiber nanocomposite membranes exhibited a maximal rejection of 95% for Mg2SO4, demonstrating their effective separation capabilities for divalent ions. The findings of this study highlight the successful synthesis and characterization of dual-layer SPPSu nanocomposite hollow fiber nanofiltration membranes incorporating TiO2 nanoparticles. The incorporation of TiO2 resulted in improved pure water flux, mechanical strength, and salt rejection performance. These enhanced properties make the developed nanocomposite membranes promising candidates for applications in nanofiltration processes, particularly for the selective separation of divalent ions from aqueous solutions.

Building Information Modelling (BIM) has been more popular in the construction industry as a consequence of the many advantages it offers, such as increased productivity, improved project outcomes, and reduced expenses. However, there are many obstacles that must be overcome before BIM can be widely used. This research uses a poll of construction industry experts to investigate the challenges associated with using BIM in projects. Cost of implementation, inadequate standards and procedures, and a lack of knowledge with BIM were some of the hurdles that were measured in the study. Statistical techniques were used to examine the data, and the findings indicate that the high cost of implementation and the absence of sufficient standards and procedures are the two main obstacles to the widespread adoption of BIM. Problems with supply chain management and a lack of experience with BIM are also mentioned as obstacles. The report also suggests solutions, such as a more focused teaching effort on BIM-related issues and the creation of a specialised BIM curriculum. Professionals in the construction industry may utilise the study’s results to their advantage by expanding their knowledge of the obstacles standing in the way of widespread adoption of BIM.

In this paper, we discuss the weak gravitational lensing in the context of stringy black holes. Initially, we examine the deflection angle of photon by charged stringy black hole. For this desire, we compute the Gaussian optical curvature and implement the Gauss-Bonnet theorem to investigate the deflection angle for spherically balanced spacetime of stringy black hole. We also analyze the influence of plasma medium in the weak gravitational lensing for stringy black hole. Moreover, the graphical impact of coupling constant $\alpha$, impact parameter $b$ , black hole charge $Q$ on deflection angle by charged stringy black hole has been studied in plasma as well as non-plasma medium.

In this study, our primary objective was to analyze the tradeoff between accuracy and complexity in machine learning models, with a specific focus on the impact of reducing complexity and entropy on the production of landslide susceptibility maps. We aimed to investigate how simplifying the model and reducing entropy can affect the capture of complex patterns in the susceptibility maps. To achieve this, we conducted a comprehensive evaluation of various machine-learning algorithms for classification tasks. We compared the performance of these algorithms in terms of accuracy and complexity, considering both "before" and "after" scenarios of dimensionality reduction using Principal Component Analysis (PCA). Our findings revealed that reducing complexity and lowering entropy can lead to an increase in model accuracy. However, we also observed that this reduction in complexity comes at the cost of losing important complex patterns in the produced landslide susceptibility maps. By simplifying the model and reducing entropy, certain intricate relationships and uncertain patterns may be overlooked, resulting in a loss of information and potentially compromising the accuracy of the susceptibility maps. The analysis encompassed a diverse range of machine learning algorithms, including Random Forest (RF), Extra Trees (EXT), XGboost, LightGBM, Catboost, Naive Bayes (NB), K-Nearest Neighbors (KNN), Gradient Boosting Machine (GBM), and Decision Trees (DT). Each algorithm was evaluated for its strengths and limitations, considering the tradeoff between accuracy and complexity. Before dimensionality reduction, the algorithms demonstrated promising results, with RF exhibiting excellent AUC/ROC scores and average accuracy. However, computational costs were noted as a potential drawback for RF, especially when dealing with large datasets. EXT showcased robust performance and good accuracy, while XGboost demonstrated its ability to handle complex relationships within large datasets, albeit requiring careful hyperparameter tuning. The efficiency and scalability of LightGBM made it a suitable choice for large datasets, although it displayed sensitivity to class imbalance. Catboost excelled in handling categorical features, but longer training times were observed for larger datasets. NB showcased simplicity and computational efficiency but assumed independence among features. KNN, known for its capability to capture local patterns and spatial relationships, was found to be sensitive to the choice of distance metric. GBM, while capturing complex relationships effectively, was prone to overfitting without proper regularization. DT, with its interpretability and ease of understanding, faced limitations in terms of overfitting and limited generalization. After dimensionality reduction, certain algorithms exhibited improvements in their AUC/ROC scores and average accuracy, including RF, EXT, XGboost, and LightGBM. However, for a few algorithms, such as NB and DT, a decrease in performance was observed. This study provides valuable insights into the performance characteristics, strengths, and limitations of various machine learning algorithms in classification tasks. Researchers and practitioners can utilize these findings to make informed decisions when selecting algorithms for their specific datasets and requirements. We also aim to identify the potential factors contributing to the high accuracy rates obtained from these ensembled algorithms and explore possible shortcomings of non-ensembled algorithms that may result in lower accuracy rates. By conducting a comprehensive analysis of these algorithms, we seek to provide valuable insights into the benefits and limitations of ensembled approaches for landslide susceptibility mapping. Our study sheds light on the challenges faced when balancing accuracy and complexity in machine learning models for landslide susceptibility mapping. It emphasizes the importance of carefully considering the level of complexity and entropy reduction in relation to the specific patterns and uncertainties present in the data. By providing insights into this tradeoff, our research aims to assist researchers and practitioners in making informed decisions regarding model complexity and entropy reduction, ultimately improving the quality and interpretability of landslide susceptibility maps.

The comfort of human life depends on the quality, size, and reliability of the infrastructure projects. In the infrastructure systems, rapid growth is found, where the economic and sustainable impact has become a topic of significant concern for policies and government officials. To achieve con-straints of sustainable development, all the policies and actions over the infrastructure project's life cycle must be assessed. Decision-makers have adopted approaches for economic, social, and en-vironmental initiatives through Life Cycle Assessment (LCA) and Life Cycle Cost Analyses (LCCA) of infrastructure projects. The purpose of this review is to highlight the impact of per-forming LCA and LCCA in infrastructure projects. To achieve this goal, a systematic literature review methodology is adopted in which renowned databases, i.e., Web of Science, Science Direct, Emerald and Scopus were selected to extract the relevant literature. Using the PRISMA approach, 1251 publications were identified which were then filtered and 55 documents were included in the final review. In the extracted publications most, researchers were biased toward LCA and LCA individually, whereas few focused on integrated LCA and LCCA. The researchers assessed the costs and impact associated with the infrastructure project while there were less focused on the environmental cost. Besides this, techniques of economic, social, and environmental growth of infrastructure projects have been emphasized during the design phase because of substantial relations between infrastructure design and operation management. Moreover, a conceptual framework has been developed that will assist the decision-makers to consider the effects of LCA and LCCA on various aspects of the infrastructure project and how it impacts sustainability. In the last, a case study was performed to assess the developed framework with the incorporation of environmental impact cost.

Embracing Fourth Industrial Revolution(4IR) techniques is a need for a long-term sustainability and to do automation in the processes of Industrial and education sector. Rapid advancement in the information technology and other engineering technologies demand more proactive steps in the education institutes. In the post pandemic world, there is an increasing demand of changes in teaching and learning methodologies with the support of modern digital technologies. So, all of the teaching institutes need to have a significant step change in the areas of learning and teaching. The impact of 4 IR is more on the education sectors compared to previous generation’s industrial revolution. Keeping track of key technologies can be quite a challenge as they keep evolving at a very fast pace. Fourth Industrial revolution is the current technological digital revolution in which major focus is on cyber physical and biological systems such as Artificial Intelligence, Robotics, Internet on Things, Virtual Reality etc., The educators and institutions should establish the pedagogies and teaching with the aid of Industry 4.0 techniques to evolve education 4.0. So, it is very important to understand the challenges and competencies required about the implementation of 4IR by the faculty members and students who are currently studying in Higher Education Institutes (HEIs). This paper aim is to do a systematic review about industry 4.0 techniques and its application in relate to the online learning and teaching, change in pedagogies, enhancement of data management in HEIs, digital and virtual laboratories etc.

This study introduces a promising and practical method for the removal of paracetamol from aqueous environments, employing graphene oxide-polymer nanocomposite beads. The approach involves the utilization of a straightforward and facile phase inversion method, offering a convenient and efficient one-step process for the creation of adsorbent beads by integrating polymers and graphene oxide (GO). The synthesized nanocomposite beads are tailored for the removal of paracetamol from simulated wastewater in batch systems. Extensive characterization techniques are employed to scrutinize the chemical properties and structural attributes of the prepared beads. The investigation explores the impact of critical parameters such as adsorbent dosage, adsorption duration, initial paracetamol concentration, and solution pH on the adsorption process. These nanocomposite beads exhibit an exceptional paracetamol removal efficiency, achieving up to 99% removal. This research not only contributes to the advancement of efficient and sustainable adsorbent materials for pollutant removal but also underscores their potential for environmentally friendly and cost-effective solutions in the domain of wastewater treatment.

Water pollution, driven largely by the discharge of organic dyes from various industrial processes, presents a grave environmental threat. This study delves into the promise of an innovative adsorptive composite material composed of chitosan and activated charcoal, offering a sustainable and efficient solution for removing methylene blue (MB) dye from water sources. Our comprehensive investigation encompasses the synthesis, characterization, and adsorption capabilities of this composite material, revealing its remarkable physicochemical attributes and its substantial capacity to adsorb MB dye. These findings establish it as a compelling candidate for water treatment applications. The assessment of adsorbent dosage shows a direct correlation between higher dosages and enhanced MB dye removal, with an optimal dosage determined at 0.4 g/25 mL. Furthermore, pH-dependent studies demonstrate exceptional performance at lower pH levels, achieving an impressive 95% removal rate at pH 3 after 240 minutes of contact time. The composite exhibits consistent high removal percentages across a wide range of MB dye concentrations, showcasing its adaptability. In terms of reaction time, the composite achieves peak adsorption capacity within the initial 360 minutes and maintains a stable equilibrium, sustaining an impressive 99% removal efficiency thereafter. This study underscores the eco-friendliness and cost-effectiveness of the composite material, emphasizing its potential to address water pollution challenges and promote sustainable water resource management. Overall, this research yields valuable insights into a practical approach for mitigating the adverse impact of organic dyes on aquatic ecosystems and public health.

Organophilic nano clay is the composition of mostly clay and organic molecules designed to improve various materials' physical and chemical properties. Permanent deformation in asphalt pavements is primarily the result of inadequate compaction, excessive loading, and high temperatures. Rutting can result in aquaplaning, leading to accidents and costly maintenance and rehabilitation works that drain the economy. Such behavior of asphalt pavements may be attributable to poor selection of aggregate, asphalt binder, or substandard asphalt binders. This study used different percentages of organophilic nano clay ranging from 3.0% - 5.0% with two penetration grade bitumen, i.e., N.R.L 60-70 &amp; N.R.L 80-100. Adding organophilic nano clay to asphalt binder significantly reduced the rutting potential under cyclic loading at high temperatures (55 °C). Ten modified formulations and two virgin bitumen specimens were prepared. The modified binders' viscosity and rutting were tested using the Rotational Viscometer and Wheel Tracker Test (W.T.T.), respectively. The results were analyzed using software for Statistical Analysis. It was recorded that organophilic nano clay-modified bitumen significantly affected rutting to interpret the results. The results indicated that rutting decreased and viscosity increased in all nano clay-modified bitumen samples, with a 4.5% O.N.C modified binder showing the most significant improvement.

One of the most prevalent illnesses, diabetes does not directly result in patient mortality. But, it increases the risk of death. Any disease that may be predicted in its early stages can lessen its fatal effects while also enhancing the quality of the healthcare system. For the early-stage prediction of diabetes or such types of non-communicable diseases, we need the proper set of influential features. This research has developed a machine learning-based disease prediction model to identify the influential features for diabetes prediction and give a near-perfect classification accuracy. This model includes Min-Max normalization for data normalization, Isolation Forest (iForest) for outlier removal, Synthetic Minority Oversampling Technique (SMOTE) for oversampling, Random Forest based Recursive Feature Elimination (RFE-RF) test, Chi-Square test, and Minimum Redundancy Maximum Relevancy (mRMR) test based feature selection methods for identifying the influential features, and Support Vector Machine (SVM), K Nearest Neighbor (KNN), and Naive Bayes (NB) for the classification. The results clarify that the proposed model outperforms the previous models and studies. The SVM has attained an accuracy of 99.58% in classification using the five features chosen from the Chi-Square test. Lastly, SHAP, an explainable AI model, has been used to assess the classifier model’s performance. These selected features and the classifier model can be used for early-stage diabetes prediction.

Traditional metals such as stainless steel, titanium and cobalt chrome are used in biomedical applications (implants, scaffolds etc.) but suffer from issues such as osseointegration and compatibility with existing bone. One way to improve traditional biomaterials is to incorporate ceramics with these metals so that their mechanical properties can be similar to cortical bones. Tricalcium phosphate is such a ceramic with properties so that it can be used in human body. This research explores the use of binder jetting based additive manufacturing process to create a novel biocomposite made of cobalt chrome and tricalcium phosphate. Experiments were conducted and processing parameters were varied to study their effect on the printing of this biocomposite. Layer thickness, binder saturation and drying time affected the dimensional tolerance and the density of the green samples. This effect is important to understand so that the material can be optimized for use in specific applications.

Despite of being an exceptionally biodiversity rich country, the forest coverage of Bangladesh is declining at an alarming rate. Declaration and management of protected areas in this regard is one of the efforts from government side to tackle the loss of biodiversity. The limited numbers of forest-protected areas (FPA), established to conserve the dwindling forest biodiversity of the country with high pressure on them for timber, non-timber forest products, and fuelwood - makes their management challenging. Moreover, most of the FPAs of the country declared only in the recent decades with very limited infrastructure, manpower and policy support for monitoring and governance. Some people-centred approaches for the management of FPAs and alternative livelihood and income generation subsidies although made available through a few project interventions, their number are still inadequate and performance remains less than satisfactory. This chapter provides a critical review of the FPAs of Bangladesh looking at their role in biodiversity conservation, management challenges, and key lessons from previous management interventions with recommendations for the future. It has been revealed that the FPA system of Bangladesh still poorly represents the diverse forest ecosystems with relatively small forest size and lack of corridors for the movement of wildlife. There are ample opportunities to render co-management of FPAs an effective strategy to minimize the conflicts in FPAs management in the country. It is, however, important to ensure the access of local forest-dependent people to different alternative income generating options that may adequately support their livelihoods.

From the hospital wastewater, a novel bacteriophage was isolated and characterized. According to characterization properties, this bacteriophage belongs to the Siphoviridae family, the maximum bacteriophage titer was recorded at 37°C and a pH of 7.2, had a 44,789 bp linear double-strand DNA genome, and within the genome sequence, there are 61 genes, all of which are encoded into proteins. Although this bacteriophage does not have any virulence factors or antimicrobial resistance genes and had specific lytic activity against some antimicrobial resistance S. aureus clinical isolates.

Saudi Arabia is an oil-reliant nation as a large percentage of its GDP comes from oil resources. Oil dependency leaves a county at the mercy of the international crude market, and a decrease in the price of crude can seriously destabilize the economy of such nations. An example is the case of Venezuela whose dependence on oil caused a national disaster (McCarthy, 2017). As such, the nation’s exports, GDP, and government revenue are primarily dependent on oil revenue, and the recent decrease in the oil prices has decreased Venezuela’s national revenue resulting in economic collapse as well as inflation. A shift from a resource based economy to a knowledge based economy will help Saudi Arabia become less reliant on its oil revenues for its economic stability and growth (Nurunnabi, 2017).

The electromagnetic inference is an issue from decades, where working for a better shielding material is still on-going. The purpose of this study is to review the existing methods in the formation of graphene, metal and polymer-based composites. Study indicates that in graphene and metal-based composites, the utilization of alternating deposition method showed the highest shielding effectiveness, whereas, in polymer-based composite, the utilization of chemical vapor deposition method showed highest shielding effectiveness. However, this review reveals that still there is a gap in the literature in terms of the selection of the method. Although there are various available methods which researchers adopt as per their convenience, none of the studies makes a comparison of the methods to form a similar composite. Therefore, as a future gap researcher needs to adopt various methods to form a single composite and then make a comparison of shielding effectiveness. This act will be useful for future researchers to select the appropriate method.

Annually, more than 1.5 million preventable new hepatitis B (HBV) infections continue to occur, with an estimated global burden of 296 million individuals living with chronic hepatitis B infection. This substantial health challenge results in over 820,000 annual deaths attributed to complications such as liver cirrhosis and hepatocellular carcinoma (HCC). HBV vaccination remains the cornerstone of public health policy to prevent chronic hepatitis B and its related complications. It serves as a crucial element in the global effort to eliminate HBV, as established by the World Health Organization (WHO), with an ambitious 90% vaccination target by 2030. However, reports on global birth dose coverage reveal substantial variability, with an overall coverage rate of only 46%. This comprehensive review thoroughly examines global trends in HBV vaccination coverage, investigating the profound impact of vaccination on HBV prevalence and its consequences across diverse populations, including both high-risk and general demographics. Additionally, the review addresses the formidable challenges and facilitating factors essential for achieving WHO's HBV vaccination coverage objectives and elimination strategies in the coming decade and beyond.

Alzheimer’s is a degenerative brain condition brought on by intricate brain changes after cell injury. The prevalence of Alzheimer’s disease is highest in those over 65. Presently, AD is detected by manual examination of a patient’s Magnetic Resonance Imaging (MRI) scan and neuropsychological assessments. Due to its subpar accuracy and performance, solutions based on artificial intelligence (AI) have not been made more widely available. This paper proposes a deep Convolutional Neural Network (CNN) with the pre-trained MobileNet-V2 architecture as the model’s base for feature extraction and reducing the parameter size and training time. The proposed model accurately classifies various early stages of AD. The proposed approach visualizes the class activation maps in the form of a heat map on brain MRI scans via the Grad-CAM algorithm that lifts the black-box nature of the deep model. To handle the imbalance problem of the AD data set acquired from Kaggle, the oversampling algorithm SMOTE interpolates new images to even the class samples. The proposed multi-class classification deep model is named Bio-AD and evaluated using different quality metrics. The Bio-AD model has the following values for evaluation metrics: 97.92%, 99.87%, 97.87%, 98%, 98%, and 0.0646 for accuracy, Area Under the Curve (AUC), F1-score, Precision, Recall, and loss respectively. The proposed Bio-AD model is compared with DenseNet-169, VGG-19, and InceptionResNet-V2 using different quality metrics and outperformed in comparison with all other models using the AD data set.

This paper presents a concise mathematical framework for investigating both feed-forward and backward process, during the training to learn model weights, of an artificial neural network (ANN). Inspired from the idea of the two-step rule for backpropagation, we define a notion of F_adjoint which is aimed at a better description of the backpropagation algorithm. In particular, by introducing the notions of F-propagation and F-adjoint through a deep neural network architecture, the backpropagation associated to a cost/loss function is proven to be completely characterized by the F-adjoint of the corresponding F-propagation relatively to the partial derivative, with respect to the inputs, of the cost function.

This study examines the relationship between entrepreneurship and sustainable devel-opment in Saudi Arabia from 2006 to 2022, focusing on the economic, social, and en-vironmental dimensions. Using the Autoregressive Distributed Lag (ARDL) model, the research investigates both short-run and long-run dynamics to understand how entre-preneurial activities influence sustainable development within the framework of Saudi Arabia's Vision 2030 initiative. The findings indicate that entrepreneurship significantly contributes to economic growth through job creation and innovation, thereby aiding in the diversification of the economy away from oil dependency. Socially, entrepreneurial ini-tiatives have a positive impact on gender equality and social inclusion by empowering women and integrating youth into the labour market. Environmentally, entrepreneurship helps reduce carbon emissions and promotes sustainable business practices. Despite these positive outcomes, challenges such as regulatory barriers, limited access to finance, and the need for a supportive entrepreneurial ecosystem remain. Recommendations include enhancing entrepreneurial education, providing financial incentives, and streamlining regulatory processes to better support start-ups and SMEs. The study highlights the ne-cessity of addressing these challenges to fully realize the potential of entrepreneurship for sustainable development in Saudi Arabia. By providing empirical evidence on the sig-nificant role of entrepreneurship in driving sustainable development, this research offers actionable insights for policymakers aiming to foster a more resilient and diversified economy in line with Vision 2030. .

This study investigates the impact of intellectual capital on the sustainable performance of banks in Saudi Arabia, focusing on the period from 2012 to 2022. Utilizing data from ten major Saudi banks, the research examines how different components of intellectual capital—Human Capital Efficiency (HCE), Structural Capital Efficiency (SCE), and Capital Employed Efficiency (CEE)—influence key financial performance indicators such as Return on Equity (ROE) and Net Profit Margin (NPM). The study is grounded in the resource-based view of the firm, which suggests that a firm’s internal resources can provide a sustainable competitive advantage. The analysis employs panel data techniques, including fixed and random effects models, to assess the relationships between intellectual capital components and bank performance while controlling for variables like bank size, financial leverage, GDP growth, inflation, and the impact of the COVID-19 pandemic. The findings reveal that intellectual capital significantly enhances bank performance in Saudi Arabia, with human capital efficiency showing the most decisive influence on ROE and NPM. Structural capital and capital employed efficiency also contribute positively but vary in their impact on different performance measures. This research contributes to the theoretical and practical understanding of the role of intellectual capital in promoting sustainable banking practices. It underscores the importance of strategic management of intellectual capital in enhancing financial performance and achieving sustainability goals, particularly in the context of Saudi Arabia's Vision 2030. The study's insights are relevant for bank managers and policymakers who leverage intellectual capital for economic diversification and sustainable development.

This paper examines how housing prices are determined by macroeconomic factors in Saudi Arabia, namely, Gross Domestic Product Per capita (GDPP), Consumer Prices Index (CPI), and Unemployment Rate (UNEMP). Quarterly data for a period (2014q1 – 2019q4) were collected from publications of Saudi Arabian Monetary Authority (SAMA). Vector Autoregression Analysis (VAR) is employed to capture the dynamic effect of the variables on housing prices. Granger Causality, Variance Decomposition and Impulse response function are also used. The results show that housing prices are insignificantly and positively related to GDPP, whereas it is negatively related to both (CPI & UNEMP). Only CPI has a significant relationship. The three variables, jointly, have Granger causality on HPI. Variance decompositions show that CPI is the variable with the highest explanatory power over the variation of housing prices, followed by GDPP and the UNEMP respectively indicating that CPI is the most influential determinants for housing prices.

The technical capabilities of modern Industry 4.0 and Industry 5.0 are rather vast and growing exponentially daily. The present-day Industrial Internet of Things (IIoT) combines manifold underlying technologies that require real-time interconnections and communications among heterogeneous devices. Smart cities are established with sophisticated designs and control for seamless Machine-to-Machine (M2M) communication to optimize resources, costs, performances, and energy distribution. All the sensory devices within a building interact to maintain a sustainable climate for residents and intuitively optimize the energy distribution to optimize energy production. However, it encompasses quite a few challenges for devices that lack compatible and interoperable designs. Conventional solutions are restricted to limited domains or rely on engineers to design and deploy translators for each pair of ontologies. This is a costly process in terms of engineering efforts and computational resources. The issue persists that a new device with a different ontology must be integrated into an existing IoT network. We propose a self-learning model that can determine the taxonomy of devices given their ontology meta-data and structural information. The model finds matches between two distinct ontologies using the Natural Language Processing (NLP) approach for learning linguistic contexts. Then, by visualizing the ontology network as a knowledge graph, it is possible to learn the structure of the meta-data and understand the device's message formulation. Finally, it can align entities of both ontology graphs similar in context and structure. Furthermore, the model performs dynamic M2M translation without requiring extra engineering or hardware efforts.

The paper draws attention and opens the debate on major societal issues that concern not only Muslims but human societies, at large, because of their profound implications, afflictions, and their present and future transitive dimensions. The paper discusses two major issues that have attracted a great deal of attention in the recent past: wealth and income disparities, and global indebtedness. Four remedies have stressed upon and/or proposed to eradicate and/or lessen some of the burdens of these problems have been thoroughly examined. These are: - Stripping commercial banks of their power to create money out of thin air (i.e., Ex Nihilo). Thus, reviving financial reform in line with the spirit of the call for the “Establishment of a National Bank [in England]” in the 1820s by the renowned British economist David Ricardo (1772-1823). The Bank of England was a private commercial entity at that time. - Prohibiting of ‘harmful’ speculation activities in financial and economic transactions and/or imposing hefty taxes on transactions relating to such activities. The implementation of such a policy requires and clear-cut distinction between the ‘harmful’ and ‘non-harmful’ speculative activities in financial and non-financial markets. - Levying adequate and fair taxes on the wealthiest upper class at the global scene. Calls for such a policy is on rise in the past few years. For instance, “Speakers at the European Development Days summit in Brussels, [in 2017], said that a just tax system should be “at the heart” of the development debate, and that more transparency is needed to ensure that companies pay their fair share. Tax avoidance schemes used by multinational companies, such as moving profits to tax havens, result in global losses of around $650 billion a year in tax receipts — with developing countries losing $200 billion, according to a study from the International Monetary Fund”, (Edwards, 2017; Crivello et al., 2015, p. 21) - Establishing a neutral legislative and tax regimes for different modes of financing. Thus, providing ‘a level playing field’ for equity and debt modes of financing due to the current biasness of the tax regimes to debt-based financing instruments as it has been documented in various studies carried out by the IMF, the European Commission, and other international prominent bodies.

The research article provides an in-depth analysis of the European Medicines Agency (EMA) and the Directorate General of Drug Administration (DGDA), focusing on their historical development, organizational structures, and functional roles in ensuring the quality and safety of pharmaceuticals. The study highlights the origins of drug regulation, tracing back to the early 19th century in the United States with the establishment of the Food and Drug Administration (FDA), and discusses the evolution and significance of drug regulatory bodies worldwide. The EMA and DGDA are scrutinized for their efforts in maintaining high standards for drug approval, monitoring clinical trials, and managing post-marketing surveillance to prevent adverse drug reactions (ADRs). The EMA’s role in coordinating with EU member states on pharmacovigilance and the DGDA’s initiatives in Bangladesh, including the implementation of a nationwide drug database and pharmacovigilance system, are explored in detail. The article concludes by emphasizing the essential role of these regulatory bodies in safeguarding public health through stringent regulation and continuous monitoring of pharmaceuticals, thereby ensuring that only safe and effective medicines are available to consumers . It also provides an in-depth analysis of the roles, structures, and historical contexts of the European Medicines Agency (EMA) and the Directorate General of Drug Administration (DGDA). It outlines how these regulatory bodies ensure the safety, efficacy, and quality of medicinal products. The EMA, serving the European Union, and the DGDA, operating in Bangladesh, play critical roles in drug approval processes, pharmacovigilance, and maintaining public health standards. By setting rigorous guidelines and monitoring compliance, these agencies help safeguard the health of millions, ensuring that only safe and effective medications are available in the market. The paper underscores the importance of these regulatory bodies in promoting public health and supporting the pharmaceutical industry's development and innovation.

The climate crisis necessitates a global shift to achieve a secure, sustainable, and affordable energy system toward a green energy transition reaching climate neutrality by 2050. Because of this, renewable energy sources have come to the forefront and the research interest in microgrids which rely on distributed generation and storage systems has exploded. Furthermore, many new markets for energy trading, ancillary services, and frequency reserve markets have provided attractive investment opportunities in exchange for balancing the supply and demand of electricity. Artificial intelligence can be utilized to locally optimize energy consumption, trade energy with the main grid, and participate in these markets. Reinforcement learning (RL) is one of the most promising approaches to achieve this goal because it enables an agent to learn optimal behavior in a microgrid by executing specific actions that maximize the long-term reward signal/function. The study focuses on testing two optimization algorithms: logic-based optimization and reinforcement learning. This paper proposes an optimization algorithm based on reinforcement learning in an industrial microgrid that is capable of trading energy with the main grid, providing significant cost savings. The RL-based approach is implemented in Python based on real data from the site and in combination with MATLAB-Simulink to validate its results. The application of the RL algorithm achieved an average monthly cost saving of 20% compared to logic-based optimization and 86% savings compared to not using any optimization. These findings contribute to digitalization and decarbonization of energy technology and support fundamental goals and policies of the European Green Deal.

This study delves into the dynamic field of medical education research, emphasizing the integration of research training within medical curricula. It seeks to understand the impact of such integration on the competencies of future medical professionals. The primary aim is to systematically categorize and analyze the current trends and future directions in medical education research. This involves assessing the influence of research training on medical students' skills and the methodologies used in such research. Methods: The research employs an extensive bibliographic literature review across multiple databases. It classifies studies into categories like experiential or case studies, editorials, and original research articles. This classification is based on criteria such as geographical location, research objectives, theoretical frameworks, and methodologies. Results: Findings reveal a diverse landscape in medical education research, with a significant emphasis on research training. The research showcases varying methodologies and approaches used globally, highlighting the thematic focus and geographical distribution of these studies. Conclusion: Medical education research is a globally expansive and evolving field. It underscores the importance of continuous investigation, particularly focusing on integrating research elements at curricular levels and exploring innovative educational strategies. The study also points out potential gaps in research, especially in underrepresented regions, indicating directions for future research efforts.

As prominent oil producers, the Gulf Cooperation Council (GCC) countries have played a significant role in the global energy market. However, as the world's attention increasingly shifts towards environmental sustainability, understanding the implications of the GCC's economic activities on CO2 emissions becomes indispensable. This research paper investigates the relationship between specific economic indicators and their impact on CO2 emissions in the GCC from 2001 to 2021. The study employs quantile regression, a powerful statistical method that estimates the conditional quantiles of a response variable given a set of predictor variables. The findings reveal several important insights: Financial institution efficiency is significant and negative at a 1% level at the lower (10th) -83537.3 and the higher quantile (90th) -549002.3. The relationship between GDP per capita and CO2 emissions varies across quantiles, highlighting the complexity of the growth-environment nexus. Total patents exhibit a positive and significant relationship with emissions, underscoring the importance of directing innovation towards environmentally sustainable solutions. Renewable energy consumption displays a nuanced relationship with CO2 emissions, with a stronger negative impact observed at higher consumption levels. This underscores the potential of renewable energy to mitigate emissions when integrated at scale. The study's outcomes hold crucial policy implications for the GCC countries as they seek to align economic growth with environmental sustainability. The findings emphasize the importance of fostering financial institution efficiency, promoting green innovation, and expanding renewable energy sources to reduce emissions

COVID-19 has substantially influenced healthcare systems, requiring early prognosis for innovative therapies and optimal results, especially in individuals with comorbidities. Healthcare practitioners have used AI systems for investigating, anticipating, and predicting diseases, through means including medication development, clinical trial analysis, and pandemic forecasting. This study proposes the use of AI to predict disease severity in terms of hospital mortality among COVID-19 patients. Methodology: A cross-sectional study was conducted the approval from the Research Ethics Committee of King Abdulaziz University (KAU), Saudi Arabia. The study used sequential sampling approaches to include 50 Real-Time Polymerase Chain Reaction (RT-PCR) positive COVID-19 patients from KAU's coronavirus isolation wards. A pre-designed form was used to collect each patient's demographic information, including age and gender, signs and symptoms, illness severity (mild, moderate, severe), and laboratory findings. Furthermore, the length of the hospital stay and the result, whether the patient recovered or died, were reported. Results: The study involved 50 patients with varying degrees of disease severity, most of whom suffered from fever, fatigue, cough, sore throat, and diarrhoea. Laboratory analysis of COVID-19 patients showed increased white blood cell and platelet counts, with C-reactive protein levels above normal. Elevated LDH levels indicated possible tissue damage, while ferritin levels were elevated. Other enzymes were in the normal range, but bilirubin levels were slightly elevated. Overall, the patient's lab results indicated inflammation and possible blood clot formation. The study evaluated the predictive accuracy for outcomes and mortality of COVID-19 patients based on factors such as CRP, LDH, Ferritin, ALP, Bilirubin, D-dimers, and hospital stay (p-value ≤0.05). The predictive accuracy mortality of patients with COVID-19 using AI showed Hospital stay, D-Dimers ALP, Bilirubin, LDH, CRP, and Ferritin significantly affected hospital mortality. (p ≤ 0.0001). Conclusion: Artificial Intelligence is crucial for identifying early coronavirus infections and monitoring patient conditions. It improves treatment consistency and decision-making via the development of algorithms. AI can track the crisis at various scales, facilitate research, and aid in developing treatment regimens, prevention strategies, and drugs and vaccines. It also aids in monitoring health and facilitating research on the virus.

Mesentery was discovered as a new organ in 2017. It is a continuous membranous tissue from the duodenojejunal flexure to the anorectal junction. It has distinct anatomy, physiology, and disease states. Primary mesenteropathies include vascular and non-vascular diseases. Some of them are common, and some of them are rarely seen in clinical practice. Secondary mesenteropathies occur when infection or malignancy in another organ spreads to the mesentery. Each entity has specific diagnostic and treatment protocols.

Waste management is a critical issue globally, and Bangladesh is no exception, facing significant challenges due to rapid urbanization, population growth, and inadequate infrastructure. This article explores comprehensive waste management strategies, including waste segregation, recycling, composting, and waste-to-energy technologies, emphasizing their environmental and health benefits. It examines the past and present waste management conditions in Bangladesh, highlighting the progress made and the persistent challenges. The article also compares waste management practices in neighboring countries like India, Bhutan, Sri Lanka, and Nepal, offering insights into potential improvements for Bangladesh. Emphasizing the need for public awareness, community involvement, and modern infrastructure, it calls for collaborative efforts to achieve sustainable waste management and environmental preservation in Bangladesh. This article examines the critical issue of waste management, emphasizing its importance in mitigating environmental pollution, conserving resources, and protecting public health. It provides a detailed analysis of various waste management strategies, including waste segregation, recycling, composting, and waste-to-energy technologies, highlighting their benefits and implementation challenges. Focusing on Bangladesh, the article traces the evolution of the country's waste management system, from past inadequacies to recent improvements, while acknowledging persistent issues such as rapid urbanization and insufficient infrastructure. Comparisons with waste management practices in neighboring countries like India, Bhutan, Sri Lanka, and Nepal offer valuable insights and potential strategies for Bangladesh to adopt. The article underscores the necessity of public awareness, community involvement, and robust infrastructure to achieve effective waste management. It calls for a collaborative approach involving government, private sector, NGOs, and local communities to develop sustainable solutions. By investing in modern waste management technologies and fostering responsible consumption and disposal habits, Bangladesh can address its waste management challenges, ensuring environmental preservation, public health, and overall national well-being.

The branding of cities through their historical and cultural assets has become a pivotal strategy in urban development and tourism. This study focuses on Erbil Citadel, a UNESCO World Heritage Site, and its potential as a brand for Erbil, a city with a rich historical backdrop and flourishing urban landscape. The study aimed to explore the perceptions of Erbil's residents regarding the cultural significance of the Citadel and its potential as a city brand. A mixed-method survey questionnaire was conducted, collecting data from around 440 residents through both manual distribution around the Citadel and an online platform. The findings were analysed using SPSS to provide both descriptive and inferential statistical insights.

Magneto-rheological dampers (MR-dampers) are increasingly used in construction applications to reduce the dynamic response of structures to seismic activities or severe wind loading. Sensors attached to the structure will signal the computer to supply the dampers with electric charge that transfers the MR fluid to a near-solid material with different physical and mechanical properties (viscoelastic behavior). Control algorithms govern the fluid to near-solid conversion, which controls the behavior of the damper, and the performance of the structure under the seismic or wind loading event. The successful optimization of control parameters minimize the overall structural response to dynamic forces. The main objective of this research is to change the output behavior of specific floors within a building subjected to seismic excitation by optimizing the MR-dampers control parameters to impact the behavior of a specific floor or number of floors within the building. The adjustment of control parameters to attain this objective was validated in multiple case studies throughout this research. The successful implementation of the research outcome will result in optimized MR-damper design to meet the performance-based criteria of building projects.

Inertial navigation system (INS) is a basic component for obtaining a continuous navigation solution in various applications. The INS navigation solution suffers from a growing error over time. In particular, its navigation solution depends mainly on the quality and grade of the inertial measuring unit (IMU) that provides the INS with both accelerations and angular rates. However, low-cost small micro-electro-mechanical systems (MEMS) suffer from tremendous error sources such as bias, scale factor, scale factor instability, and highly non-linear noise. Therefore, MEMS-IMU measurements lead to drifted solutions when used as a control input to the INS. Accordingly, several approaches have been introduced to model and mitigate the errors associated with IMU. In this paper, a machine learning-based adaptive neuro-fuzzy inference system (ML-ANFIS) is proposed to leverage the performance of low-grade IMUs in two phases. The first phase is training 50% of the low-grade IMU measurements with a high-end IMU to generate a suitable error model. The second phase involved testing the developed model on the remaining low-grade IMU measurements. A real road trajectory was conducted to evaluate the performance of the proposed algorithm. The results show the effectiveness of utilizing the proposed ML-ANFIS algorithm in removing errors and improving the INS solution compared to the traditional one. An improvement of 70% in the 2D-positioning and 92% in the 2D-velocity INS solution is attained when the proposed algorithm was applied compared to the traditional INS solution.

This study tries to focusing on applying information communication technology for economic importance of Mid Oil Company (MDOC), which is among contemporary oil companies in Iraq. Since ICT forms a significant aspect of achieving organizational economic objectives, most of public and private bodies seek to utilize ICT tool and techniques to improve work efficiencies. The emerging growth in ICT has made it process and service automation possible in managing organizational activities. To determine this effect of ICT on organizations, this study formulated statistical research model at MDOC through using fifteen questionnaires, which were distributed on three axes. The outcome of the questionnaire analysis revealed that there is inadequate comprehensive infrastructure to suitably support ICT within the selected organization management. In addition, it revealed that there are no ideal standards to maintain and sustain internet networks. Based on these revelations, the study presents recommendation for the adoption of ICT with the aim of minimizing cost, enhancing communication and managing infrastructure. Also recommends the need to support IT department within an organization, with essential equipment, in terms of man and machine, for better efficiency to employ the key of ICT Impact in Iraqi governmental oil companies.

High-Performance Liquid Chromatography (HPLC) is an advanced analytical technique employed to separate, identify, and quantify components in complex mixtures. The method operates based on the differential affinities of sample molecules for the mobile and stationary phases within a chromatographic column. HPLC is recognized for its high resolution, accuracy, and efficiency, making it indispensable across various fields including pharmaceuticals, biotechnology, environmental analysis, and forensic science. The technique's adaptability to different detectors such as UV-visible, fluorescence, and mass spectrometry enhances its versatility and precision in analyzing a wide array of substances. Despite its advantages, HPLC presents challenges such as high operational costs, the need for specialized expertise, and susceptibility to contamination.Nonetheless, its role in modern analytical chemistry is pivotal, providing crucial insights and supporting developments in diverse scientific and industrial domains. This abstract encapsulates the core aspects of the article, highlighting the significance and applications of HPLC while also acknowledging its limitations.

This paper deals with the techno-economic study of the hybrid renewable energy system based on energy storage aspect under the form of hydrogen and methane. Indeed, with the intermittency of the renewable energy sources such as photovoltaic and wind energy, several problems of produced energy injection to the power system network can be encountered due to the shortage or the excess of these sources. This situation appeals the use of systems that ensure the stability of network based on the storage of energy surplus into gas using electrolyzer systems, which will be used afterward to cover the eventual shortage. In the present paper, the study of performance of each pathway of methane and hydrogen storage has been performed by the treatment of multiple scenarios via different architecture case studies in an Algerian location. Whereas, the energy produced by the photovoltaic system, the wind energy and the gas micro turbine sources are considered similar in each case. The modeling and simulation of the studied system operation under optimization criteria has been performed in this work, where the main aim is to define the appropriate configuration taking into account the different with low costs of investment, maintenance operation and immediate reactivity with a big storage capacity.

In this paper, we investigate the behaviour of a relativistic quantum oscillator under the effects of Lorentz symmetry violation determined by a tensor (KF)µναβ out of the Standard Model Extension. We analyze the quantum system under a Coulomb-type radial electric field and a uniform magnetic induced by Lorentz symmetry breaking effects under a Cornell-type potential, and obtain the bound states solution by solving the Klein-Gordon oscillator. We see a quantum effect due to the dependence of the angular frequency of the oscillator on the quantum numbers of the system, and the energy eigenvalues and the wave-function of the oscillator field get modified by the Lorentz symmetry breaking parameters as well as due to the presence of Cornell-type potential.

Yeast extract is widely used in different food industries as a flavoring agent or vitamin supplement. In this study, a process was optimized for the production of yeast extract from Baker’s yeast (Saccharomyces cerevisiae). A glass vessel stirred fermenter was used for the cultivation of yeast biomass. The effect of various physical and chemical factors was evaluated on the production of yeast cells and optimum conditions for the production of maximum yeast biomass were determined. The optimum growth was obtained at 30ºC with pH 4.5 using molasses as a substrate supplemented with urea at 150rpm. Yeast cells were then separated by centrifugation and ruptured and autolysis was observed to be the most feasible method. Among various method employed to dry the yeast extract, spray dryer appeared as most efficient one. Yeast extract obtained after drying was subjected to different analyses and compared with commercial yeast extract. The produced yeast extract was applied in media preparation to grow different microorganisms including yeast, bacteria and fungi and considerable growth was observed. These results indicated that the developed process is a cost effective alternate approach for the production of yeast extract.

Tamarix nilotica (Ehrenb.) Bunge (Tamaricaceae), an indigenous plant to the Middle East region, is well-known as a medicinal plant for treating many human ailments. The current study aimed at exploring the polyphenols profile of T.nilotica alcohol soluble fraction of aqueous extract, assessing its in-vivo antifibrotic activity and the possible underlying mechanism, to unravel the impact of quantitative difference of sulphated polyphenols content on the antifibrotic activity of T.nilotca grown in two different habitats. Polyphenols profiling of T. nilotica extracts was performed using HPLC-HRESI-QTOF-MS-MS. The major polyphenol components included sulphated flavonoids, phenolic acids and free aglycones. The antifibrotic activity was evaluated through carbon tetrachloride-induced liver fibrosis in rats. Biochemical evaluations revealed that both fractions ameliorated the increased levels of hepatic aminotransferases, lipid peroxidation, hydroxyproline, α-smooth muscle actin (α-SMA), tumor necrosis factor-α (TNF-α), cyclooxygenase-2 (COX-2) and nuclear factor kappa B (NF-κB). Moreover, both fractions reduced catalase activity (CAT) and enhanced hepatic glutathione (GSH) content. Histopathological imaging undoubtedly confirmed such results. In conclusion, T. nilotica polyphenols rich fraction exhibited potential antifibrotic activity in rats. Significant alterations in GSH levels were recorded based on sulphated polyphenol metabolites content.

Systematics plays the most crucial role in biodiversity conservation which is at stake due to anthropogenic activities and environmental degradations. The ever-increasing decline of classical taxonomic expertise drives the need to develop molecular marker-based tools for quick, efficient, and reliable detection of organisms, to assess their ecological impacts for deepening our understanding of systematic and evolutionary relationships between organisms which is central to biology. The pace of alpha taxonomy has quickened by its integration with an increasingly fashionable and novel concept called DNA barcoding which utilizes a short genetic marker or barcode to categorize species for enhanced biodiversity assessment. As a supplementary but not complete alternative of systematics research, DNA barcoding, however, not error-free, brings precision in identification by solving existing problems of classical taxonomy and phylogenetics, irrespective of the growth stage of organisms, particularly for known taxa rather than unknown ones. Mitochondrial gene Cytochrome C Oxidase 1 (COI) serves as a universal animal barcode but there is no such universal barcode for plants and developing a suitable one is more challenging. With the recent advancement of Next Generation Sequencing (NGS), DNA metabarcoding technology is advancing rapidly. Still, ambiguity and error prevail with the correct identification of species due to some problems. After extensive analysis of the existing DNA barcoding papers, this review discusses commonly used DNA barcodes in plants and animals, their roles, advantages, limitations to solve existing problems of conservation biology and add the author’s views and recommendations.

The general objective of the study is to analyze food insecurity determinants mainly related to food price at macro level. The study used a time series data from the year 1988 quarter one to 2018 quarter four. Our empirical finding on the macroeconomic model show the short term consequence of food price change is positive with food security (negative with food insecurity). The long term consequence of food price change is, however, negative with food security (positive with food insecurity) at macro level. From the variance decomposition, it can be learned that the speed by which the undernourished people decrease in number in the short term because of the inflation happened is higher than the speed by which the number of undernourished people increase in the long run. At macro level, concern should be made to the supply side for food security improvement.

In this paper, a relativistic scalar particle under Lorentz symmetry breaking effects in the presence of a scalar potential is investigated. We introduce the scalar potential by modifying the mass via transformation M → M+S(r) in the wave equation and analyze the behaviour of a scalar particle. We see that the analytical solution to the KleinGordon equation can be achieved, and the energy eigenvalues and the wave function depends on the Lorentz symmetry breaking parameters as well as potential

Background and Objectives: In Libya, prescription medicines can easily be dispensed without a prescription, as self-medication with the subsequent of potential misuse and unnecessary risk for patients. This systematic review and meta-analysis explored the prevalence of self-medication among citizens in Libya. Methods: We systematically searched PubMed, ISI Web of Knowledge, EMBASE, Medline, Scopus, google scholar and ResearchGate databases for studies published in Libya reporting the prevalence of non-prescription use of medicines in community pharmacies, targeting studies published from Jan 2008 until Dec 2019. A random meta-analysis was performed to analyze pooled estimates of non-prescription usage of medicines. Results: Out of 63 articles identified, a total of 13 papers from 7 cities were met the inclusion criteria and involved a total of 4741 subjects. The overall pooled proportion of self-medication of drugs was 53.6% (95% CI: 0.93% - 1.08%), with low heterogeneity and the P-value of the whole population tasted was found to be = 1.000 (df = 12). Seven out of the 13 studies reported data on self-medication for antibiotics without prescription. The records ranged from 15.3% (95% CI 0.61–1.65) in Misurata to 76.6% (95% CI 0.80–1.25) in Tripoli. Conclusion: Self-medication use of medicines among Libyan population is a common phenomenon involving a high proportion use of antibiotics. This misuse of medications could enhance the development and spread of antibiotic resistance.

Supported wellbeing centres were set up in UK hospital trusts as an early intervention aimed at mitigating the psychological impact of COVID-19 on healthcare workers. These provided high quality rest spaces with peer-to-peer psychological support provided by National Health Service (NHS) staff volunteers called ‘wellbeing buddies’, trained in psychological first aid. The aim of the study was to explore the views of centre visitors and operational staff towards this COVID-19 workforce wellbeing provision. Qualitative semi-structured interviews were undertaken with twenty-four (20F, 4M) employees from an acute hospital trust in the UK. Interviews were digitally recorded and transcribed, data were handled and analysed using thematic analysis. Interviews generated 3 over-arching themes, and 13 sub-themes covering ‘exposure and job roles’, ‘emotional impacts of COVID-19 and ‘the wellbeing centres’. Supported wellbeing centres were viewed as critical for the wellbeing of hospital employees during the first surge of COVID-19 in the UK. Wellbeing initiatives require managerial advocacy and must be inclusive. Job-related barriers to work breaks and accessing staff wellbeing provisions should be addressed. High quality rest spaces and access to peer-to-peer support are seen to benefit individuals, teams, organisations and care quality. Training NHS staff in psychological first aid is a useful approach to supporting the wellbeing of the NHS workforce during and beyond the COVID-19 pandemic.

Few prior works study self-driving cars by deep learning with IoT collaboration. SDC-Net, which is an end-to-end multitask self-driving car camera cocoon IoT-based system, is one of the research that tackles this direction. However, by design SDC-Net is not able to identify the accident locations, it only classifies if it is a crash scene or not. In this work, we introduce an enhanced design for the SDC-Net system by 1) replacing the classification network with a detection one, 2) adapting our benchmark dataset labels built on the CARLA simulator to include the vehicles bounding boxes while keeping the same training, validation, and testing samples, 3) modifying the shared information via IoT to include the accident location. We keep the same path planning and automatic emergency braking network, the digital automation platform, and the input representations to formulate the comparative study. SDC-Net++ system is proposed to 1) output the relevant control actions, especially in case of accidents: accelerate, decelerate, maneuver, and brake, and 2) share the most critical information to the connected vehicles via IoT, especially the accident locations. A comparative study is also conducted between SDC-Net and SDC-Net++ with the same input representations: front camera only, panorama and bird-eye views, and with single-task networks: crash avoidance only, and multitask networks. Multitask network with a BEV input representation outperforms the nearest representation in precision, recall, f1-score, and accuracy by more than 15.134%, 12.046%, 13.593%, and 5%, respectively. SDC-Net++ multitask network with BEV outperforms SDC-Net multitask with BEV in precision, recall, f1-score, accuracy, and average MSE by more than 2.201%, 2.8%, 2.505%, 2%, and 18.677% respectively.

This study delves into the intricate interplay of economic growth components, specifically focusing on Consumption and investment in Saudi Arabia from 2000 to 2022. Employing vector error correction models and cointegration techniques, we analyze the short- and long-term dynamics within the relationship of Consumption, investment, and economic growth. Granger causality analysis is also used to discern these pivotal variables' causal connections. Our empirical analysis reveals a persistent long-term cointegration relationship among the variables, underscoring the enduring nature of their interdependency. Furthermore, our findings highlight Consumption and investment's statistically significant positive impact on economic growth. Notably, the short-term analysis unveils a stable model characterized by an annual adjustment to equilibrium of 100%.Moreover, the Granger causality study demonstrates unidirectional causal linkages between Consumption, investment, and economic growth. These findings hold substantial implications for policy formulation in Saudi Arabia. Policymakers must grasp the ramifications of burgeoning prosperity and evolving private consumption patterns on future environmental outcomes. Achieving sustainable long-term results necessitates equal emphasis on bolstering private Consumption and fostering other facets of economic growth.

We study a localization of gravity through the matching point between non-inertial frames and local inertial frames. This localization of gravity is done through defining relative gravitational red-shift. This lead to an emergence of a timeless state in a mathematically consistent way. In this timeless state of gravity, we find a geometric interpretation of the speed of light and mass. The experimental support of the timeless state is the quantum entanglement and internal symmetries that are independent of time. Therefore gravity would be responsible for measurements independent of time including quantum entanglement. Timeless state in that sense explain why do we have gravity/gauge correspondence. We conjecture that the universe emerged from a black hole with a global $SU(3)\times SU(2)\times U(1)$ symmetry on its event horizon that produces gauge fields Electromagnetism, weak and strong nuclear force through localization of this global symmetry. Through the localization in the gravity field, the timeless measurements such as spin will be correlated with the varying of timeless measurement which is relative gravitational red-shift. We present a gravitational or geometric interpretation of spin-0, spin-1, and spin-1/2 states. We present an interpretation of why do we measure matter rather than anti-matter. We found that the Higgs scalar field is represented by the gravitational red-shift at every point in the space around the black hole. We derive the numerical value of the cosmological constant that agrees with experimental observations.

Perilla frutescens (L.) Britt. (PF) is an annual herbal medicinal, aromatic, functional food and ornamental plant that belongs to the mint family, Lamiaceae. The origin of perilla traces back to East Asian countries (China, Japan, Korea, Taiwan, Vietnam and India), where it has been used as a valuable source of culinary and traditional medicinal uses. Leaves, seeds and stems of P. frutescens are used for various therapeutic applications in folk medicine. In the absence of comprehensive review regarding all aspects of perilla, thus this review aims to present an overview pertaining to the botanical drug, ethnobotany, phytochemistry and biological activity. It was found that the taxonomic classification of perilla species is quite confused, and the number of species is vague. Perilla has traditionally been prescribed to treat depression-related disease, anxiety, asthma, chest stuffiness, vomiting, cough, cold, flus, phlegm, tumour, allergy, intoxication, fever, headache, stuffy nose, constipation, abdominal pain, indigestion, analgesic, anti-abortive agent, and sedative. Until now, 271 natural molecules have been identified in perilla organs including; polyphenols, flavonoids, essential oils, triterpenes, carotenoids, phytosterols, fatty acids, tocopherols and policosanols. In addition to solvent extracts, these individual compounds (rosmarinic acid, perillaldehyde, luteolin, apigenin, tormentic acid, isoegomaketone) have attracted researchers' interest for pharmacological properties. Its bioactivity showed antioxidant, antimicrobial, anti-allergic, antidepressant, anti-inflammatory, anticancer, neuroprotection activity. Although the results are promising in preclinical studies (in vitro and in vivo) as well, clinical studies are insufficient, therefore further study needs to be done to validate its therapeutic effects and to ensure its safety and efficacy.

Many countries are raising questions on the intentions behind Saudi reforms. The low oil prices in 2008-09 were the awakening call for Saudis, and later in 2014, it became the reason to look for the economy that is less dependent on oil. The article studies the initiated social reforms and social impact of foreign cultural activities. It scrutinizes the Saudi social fabric under the social exchange theory and looks for the positive and negative effects of cultural exchanges. The paper also considers the COVID-19 situation in KSA as it has broken the chain of cultural events planned all over the country to promote tourism and improve the image of KSA.