This study examines the relationship of fear of missing out (FOMO) with heavy social networking among Turkish university students (aged 17 - 55). The perception of the possible role of parental supervision on online activities is also investigated. Factor analysis of FOMO scale led us to evaluate the construct under two dimensions as (1) fear of missing experience and (2) fear of missing activity. The results revealed that fear of missing activity increases social media intrusion while fear of missing experience is found to have no significant effect. The reverse relationship is also valid: an urge to use social media predicts fear of missing out (activity and experience). Fear of missing experience is associated with problematic social media use (PSMU) and a high desire to use social media. The results additionally demonstrate that students aged 30 and older believe more in the requirement of parental control than those aged 17-22.

It is shown that a Mueller quaternion can be formulated as a quaternion with matrix coefficients, and this Mueller quaternion transforms the Stokes quaternion for depolarizing process as well as for nondepolarizing process. Mueller quaternion keeps track of the phase acquired by the Stokes quaternion and, in general, quaternion states of optical media comprises all properties of Jones, Mueller-Jones and Mueller matrices.

In this paper a variable’s involved in assessing the quality of a distributed generation system are reviewed, aiming to minimize the electric power losses (unused power consumption) and optimize the voltage profile. To provide this assessment, several experiments have been made to the IEEE 34-bus test case and various actual test cases with the respect of multiple DG units. The possibility and effectiveness of the proposed algorithm for optimal placement and sizing of DG in distribution systems have been verified. Finally, four algorithms were trailed: simulated annealing (SA), hybrid genetic algorithm (HGA), genetic algorithm (GA) and variable neighbourhood search. The HGA algorithm was found to produce the best solution at a cost of longer processing time.

Day by day, the share of renewable energy-based power plants such as offshore wind farms and photovoltaic power plants, in the present-day power systems is escalating. Nevertheless, most of these power-producing facilities have been located quite far away from the load centers. At this stage, HVDC power systems provide satisfactory options due to qualities such as reduced line losses, substantial controllability, and environmental advantages. Nevertheless, unique converter designs are required to combine asynchronous HVDC networks with each other and with already existing high voltage alternating current (HVAC) networks. In this study, based on the above special cases, a unique DC-DC modular multilevel converter (MMC) architecture is presented that provides an excellent solution for both integrating modern asynchronous HVDC networks and integrating these modern HVDC power systems with existing asynchronous HVAC power systems. The mathematical analysis of the recommended DC-DC MMC design has been examined in detail and the power transfer between two asynchronous power grids has been realized in a simulation environment. Efficient bilateral power transmission has been made achievable by the control system. The recommended DC-DC MMC topology has shown to be a highly successful approach, in the interconnection of HVDC power systems, according to the simulation results.

The basic ideas [In particular, God’s departure from his pure state of “ein sof” (there are many differences of opinion on this issue’s reason, but some who do not underestimate describe it as God speaking to himself), the to appear of 4 world (The world of Adam Qadmon is not included. Some sources include the world of Adam Qadmon and describe it as the 5 worlds.) with light dispersed from God (in accordance with “sefirot”), the rise of people in 4 world by worshiping and the coming of the Messiah, and the attainment of all people to the world/state of ein sof.] of Jewish Kabbalah, the first period of which started in 400 BC and the 5th period of which started in 1700 AD (5th period is still continue), and the changes that these ideas have undergone in the historical process, and the similarities of these ideas with other religions (especially Hinduism) are remarkable and worth examining.

Integer is either a composite number or a prime number. Therefore, detecting composite numbers is important for solving prime numbers. The study of prime numbers, apart from satisfying human curiosity, can be very important. In this article, the order of composite numbers has been detected. And explained with a simple method and a simple function. And, a method has been developed in which all composite numbers and therefore prime numbers can be determined by using the specified methods, functions and formulas.

In this paper, new types of M-fractional wave solutions of mathematical physics model named as truncated M-fractional (1+1)-dimensional non-linear simplified Modified Camassa-Holm model are achieved by applying the modified simplest equation (MSE), Sardar sub-equation and generalized Kudryashov techniques. The gained solutions containing dark, bright, periodic and mixed wave solitons. Effect of fractional order derivative is also discussed. Achieved wave solitons are verified by Mathematica tool. Few of the gained wave solitons are also described through 2-dimensional, 3-dimensional and contour graphs through Mathematica tool. The gained solutions are helpful for the further development of concerned model. Finally, these techniques are simple, fruitful and effective to deal with non-linear FPDEs.

Generally, mineral fillers are added to thermoplastic polymers to reduce cost and improve performance. However, properly selected mineral fillers can also improve thermal conductivity and deformation behavior, shrinkage, impact strength, dimensional stability, and molding cycle time in thermoset polymers. This study focused on the preparation and microscopic and spectroscopic characterization of various hybrid composites using pumice as primary filler and gypsum, kaolin and hollow glass sphere as secondary fillers, as well as examining some of their mechanical properties and thermal conductivities. For this, first of all, surface modification of the clay was carried out by intercalation method from solution using raw Montmorillonite, cationic surfactant and long chain hydrocarbon material, and then organo-clay melamine formaldehyde nanocomposite was prepared by in situ synthesis using organo clay and melamine formaldehyde pre-polymer. Finally, non-ionic surfactant, foaming agent and glycerin were added to the prepared nano-composite at approximately 90°C, mixed mechanically and then pumice was added. The processes at this stage were repeated while preparing hybrid composites with pumice and other mineral additives. For curing and molding, the composite was first subjected to microwave irradiation for 5 minutes followed by thermal treatment at 140°C for 60 min. Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD) spectra and Scanning electron microscope (SEM) and High resolution transmission electron microscope (HRTEM) images were taken for morphological and textural characterization for raw clay (MMT), organo clay (OMMT) and pure polymer with prepared hybrid composites. In addition, some mechanical properties such as bending strength, elasticity modulus and screw holding resistance, as well as thermal conductivity coefficients of the hybrid composites were determined according to the relevant standards and the obtained results were evaluated. Spectroscopic and microscopic analyzes have shown that effective adhesion interactions occur between polymer-clay nanocomposite particles and filler grains, thus resulting in textural arrangements with different properties. Mechanical and thermal conductivity test results showed that melamine formaldehyde-organo-clay nano composite foam and hybrid composite containing hollow glass sphere are highly qualified materials in terms of thermal insulation and mechanical strength.

We developed some questions regarding twin prime conjecture by examining the bounded gaps between composite numbers and explained the relations between the formulas regarding composite numbers. Then we proved the twin prime conjecture to answer the new questions raised by proving the expression: \[ \liminf_{n\to\infty} (c_n_+_1 - c_n) \ge 10. \] In addition, we prove many different approaches have been and it has been proved that there must be a twin prime in the range $(p_k_2\cdot p_k_1, p^2_k_1)$, where $p \neq 2$.

"Mem u Zin" holds a paramount status in Kurdish literature, celebrated for its profound exploration of love. Authored by the esteemed Kurdish poet and writer Ahmet Khani in the 17th century, this epic masterpiece represents the pinnacle of literary achievement within the Kurdish cultural milieu. By conducting a concise analysis of "Mem u Zin," our aim was to shed light on the underlying factors that contribute to the perceived separation of Kurdish society from perfection. We provided a comprehensive view of the linguistic obstacles encountered by the Kurds in this exploration.

This study aims to investigate the spectroscopic and structural properties of the compound Lumefantrine which is important in pharmacology because of its anti-malarial effect. The structural and spectroscopic properties of this molecule such as bond lengths, bond angles, FT-IR and NMR spectra were handled computationally using a computational chemistry suite: Spar-tan’14. Both HF and DFT methods were used with different basis sets for the calculations. The re-sults calculated by the software were compared to experimental results from the literature. Both Computational and experimental results were exhibited as tables. Also some calculated results such as HOMO-LUMO boundary orbitals and electrostatic potential map, were given as graphics and pictures.

Transposable elements (TEs) ubiquitously exist in the human genome, and some have the ability to copy and paste themselves to other locations, resulting in new insertions. Organisms have evolved with mechanisms and machineries to repress such activity. TEs are also co-opted for beneficial functions by the host and are thus maintained in the genome. During the lifetime of humans, aberrant TE activity might cause or contribute towards diseases including neurological conditions such as Alzheimers Disease (AD) and cancer. While inflammatory pathways linked to TEs may be a part of the disease pathology, on the other hand altered TE activity involving inflammatory pathways could be recognised by disease suppression mechanisms. For this reason, TEs could be targeted for therapeutic applications aiming to prevent TE activity or reduce initial inflammatory pathways as well as to activate disease suppression mechanisms. In this review, we describe the contributory and potential preventative roles of TEs in neurological conditions and cancer from a molecular and evolutionary perspective. Evolutionary paradigms both at the unicellular and organismal level aid understanding the role of TEs in disease. These observations could pave the way for the development of novel therapeutic approaches targeting TEs.

In this study, I examined the Beals conjecture on the basis of formulas that produce composite numbers, and I developed some other conjectures that, if answered, would be an answer to the Beals conjecture. Apart from this, I have examined the Beals conjecture from another perspective and posed The Germany Problem.

The aim of this study, for determination of verteporfin in real samples (simulated body fluid, and simulated tears, 0.9% isotonic sodium chloride solution, Lactated Ringer IV solution for infusion, 5% dextrose IV solution for infusion, lemon juice and drinking water) was the method validation and to examined by HPLC-DAD-UV. Metod validation parameters such as specificity, linearity, precision, accuracy, robustness, limit of detection (LOD) and limit of quantitation (LOQ) for verteporfin were validated and developed according to the International Conference on Harmonization (ICH) Q2 R1 guidelines. The LOD and LOQ for verteporfin were found 0.06 µg/L and 0.2 µg/L, respectively. The recovery values of the optimization and validation for verteporfin were found in the range of 97.5-100.7%. The relative standard deviations (RSD) for vertepofin were <1%. The developed method was successfully applied to real samples with high accuracy and the recoveries (%) from real samples were 99.9, 100, 98.2, 99.2, 99.4, 98.8 and 99.4, respectively.

In this study, we examined the effects of the organizational power resources used by school principals on teachers' work alienation and trait anxiety levels. Then, we examined the mediating role of trait anxiety in the relationship between organizational power resources and work alienation. We used the correlational scanning model and mediation model in the research. The research sample consists of 400 teachers working in Turkish public schools. In our research, "Organizational Power Scale in Schools", "Work Alienation Scale" and "Trait Anxiety Scale" were used. As a result of the research, we found significant relationships between the variables. Accordingly, there is a positive relationship between trait anxiety and work alienation, a positive relationship between trait anxiety and coercive power and legal power, a negative relationship between trait anxiety and expert, charismatic and reward power, a positive relationship between work alienation and coercive power, and a positive relationship between work alienation and reward power. Negative relationships were observed between expertise and charismatic power. Finally, it was determined that trait anxiety had a mediating role in the relationship between the power resources used by school principals and the level of work alienation of teachers.

I had previously developed an approach called Gocgen approach, which claimed to prove twin prime conjecture. In this paper, I processed the previously developed Gocgen approach with the zeta function and explained the relationship between the zeta function with some formulas to offer another perspective on the zeta function, and also created a new function that explains the Gocgen approach using the zeta function. Understanding the new function created will provide insight into the frequency of prime numbers.

In this paper, the new optical wave solutions of truncated M-fractional perturbed Kundu-Eckhaus model with full non-linearity are obtained by utilizing the expa function technique and modified extended tanh expansion function technique. The solutions are in the form of dark soliton, bright soliton, singular solitons and other form of solutions. The gained solutions are helpful for the further development of concerned model. The obtained results have also been presented graphically in both two-dimensional and three-dimensional formats to discuss the dynamical features as well as the parametric dependence of the constructed solutions. The study offers a highly spectacular and acceptable techniques to combine various intriguing wave demonstrations for more sophisticated models of the modern day.

Growth-preserving instrumentation techniques are utilized in early-onset scoliosis (EOS) cases requiring surgical intervention. Shilla technique corrects the deformity and may reduce the need for surgical treatment with its growth-directing effect. As with other techniques, various prob-lems can be encountered following the administration of the Shilla technique. The aim of this study was to examine the effect of complications encountered with Shilla treatment on correction and growth. Sixteen patients with a follow-up period of at least 1 year who received Shilla growth guidance for EOS were included in the study. No complications occurred in 50% cases and no unplanned surgery was required. Of the remaining 8 patients with postoperative im-plant-related complications (50%), 6 (37.5%) required unplanned surgery; this consequently caused implant failure in the proximal region in 5 cases (31.25%) and deep tissue infection around the implant in 1 case (6.25%). Deformity correction, spine length, and quality-of-life scores significantly improved in EOS through Shilla growth guidance. Although implant-related com-plications were observed and related unplanned surgeries were required with Shilla growth guidance in our patients, these complications did not have a significant negative effect on correc-tion and spine growth.

Abstract: The empirical soil loss model, RUSLE, was used with a conjunction of remotely sensed data and geographic information system technology to delineate the soil erosion and watershed priorities in terms of conservation practices at seven boundary sub-watersheds (labeled as SW-00, SW-01, …, SW-06) between Iraq and Iran at Ali Al-Gharbi area, southern Iraq. The six factors of the RUSLE model, ie. the rainfall erosivity, the soil erodibility, the slope steepness length, the crop management, and management practice, were calculated or estimated using information from different data sources such as remotely sensed data and previous studies. The finding showed that the annual soil erosion loss ranges from 0 - 1890 (tons h-1 y-1) with an average of 0.66 (tons h-1 y-1). Values of soil erosion were classified into five classes: very low, low, moderate, high, and very high. The potential soil loss in the high and very high classes ranges from 14.84 to 1890 (tons h-1 y-1), and these classes occupy only 27 km2 of the study area, indicating that the soil loss is very low in the area being examined. In terms of the spatial distribution of soil loss, the northern and northeastern parts (mountains and hills) of the sub-watersheds where the slope is steeper are more likely to erode than the plain area in the southern and southeastern portions, indicating that slope, in addition to rainfall erosivity, has a dominant effect on the soil erosion rate. The study of soil erosion in the watersheds under consideration reveals that only the northern portions of the SW-00, SW-02, and SW-04 watersheds require high priority conservation plans; however, these portions are primarily located in mountain regions, making conservation plans implementation in these areas impractical. Due to low soil loss, other sub-watersheds, particularly SW-01, SW-03, SW-05, and SW-06, are given low priority.

ABSTRACT After locavore was chosen as “the best word of the year” in 2007, its popularity increased gradually. Today great number of locavores consciously prefer locally produced food for the benefit of themselves and their community. Undoubtedly this conscious movement has its consequences in marketing discipline. Accordingly, this paper is purposed to examine the how locavore perceptions affect loyalty towards retailers that sell locally produced food. In this context, a survey was applied to people residing in Istanbul and Kocaeli districts to measure the robustness of these effects. Furthermore, attitude towards locavore is used as a control variable to reveal to what extend locavorism affects these proposed connections. According to results, for participants with low attitude, Social Responsibility and Health Consciousness variables have significant effect on local retailer shopping loyalty. However, for participants with high attitude, all independent variables proved to have substantial effect on local retailer shopping loyalty. As the first empirical study in Turkey on the subject, this paper will provide important insight to academia and practicioners due to today’s ever-increasing consciousness in green marketing.

Pulmonary Embolism (PE) is the obstruction of blood arteries in the lungs by a blood clot. The mortality risk for PE is approximately 30%. Detecting pulmonary embolism in the segmental arteries of the lung is more challenging than in the main arteries and is very prone to being missed. A computer-based approach was created in this work to automatically identify pulmonary embolism in the segmental arteries using computed tomography images. The system's infrastructure includes an enhanced Mask R-CNN deep neural network that has been trained with images containing PE. The network accurately identifies the location of the pulmonary embolism on the computed tomography picture and successfully extracts its borders. The investigation was conducted by generating a local dataset. The study's performance was evaluated using pulmonary embolisms identified manually by the expert radiologist. The sensitivity, specificity, accuracy, dice coefficient, and Jaccard index values for 2130 pictures were 96.4%, 93.5%, 96.1%, 0.96, and 0.90, respectively. The improved Mask R-CNN model has demonstrated superior performance when compared to the traditional Mask R-CNN and U-Net models. This high-performance technology is designed to identify pulmonary embolism and will aid professionals in assessing the size of the embolism.

The main aim of this article is to examine the inter-relationships among the top cryptocurrencies on the crypto stock market in the presence and absence of the COVID-19 pandemic. The nine chosen cryptocurrencies are Bitcoin, Ethereum, Ripple, Litecoin, Eos, BitcoinCash, Binance, Stellar, and Tron and their daily closing price data are captured from coinmarketcap over the period from 9/13/2017 to 9/21/2020. To determine the order of integration, the Augmented Dickey-Fuller (ADF), Phillips-Perron (PP), and Kwiatkowski, Phillips, Schmidt, and Shin (KPSS) unit root tests were carried out, and all of the cryptocurrencies were found to be integrated of order 1 i.e. I(1). It has been found that there is strong evidence of a long-run relationship between Bitcoin and altcoins irrespective of whether it is pre-pandemic or pandemic period. Hence these cryptocurrencies' prices and their inter-relationship are resilient to the pandemic.

Recent years have witnessed significant advances in reinforcement learning (RL), which has registered remarkable success in solving various sequential decision-making problems in machine learning. Most of the successful RL applications, e.g., the games of Go and Poker, robotics, and autonomous driving, involve the participation of more than one single agent, which naturally fall into the realm of multi-agent RL (MARL), a domain with a relatively long history, and has recently re-emerged due to advances in single-agent RL techniques. Although, typically, the communication protocol between agents is manually specified and not altered during training, recently, some papers have shown signs of trying to emerge a communication between agents on the one hand and, on the other hand, to understand what is exchanged between agents. So, there is a growing body of literature on this topic which includes qualitative and quantitative studies and the ones that apply mixed methods. This study presents the scoping review of the methodological strategies undertaken in a total of 16 research articles. The results present the critical appraisal of quantitative methods in terms of validity and reliability and for qualitative methods considering four trustworthiness factors. In the end, relevant insights are further explored with implications and reflections on how they can benefit one's research in the field.

The rapid growth in scientific article publications allows us to access articles as soon as possible. Therefore, automatic summarization systems (ATSs) are widely preferred. In most studies, the en-tire source document is expected to be summarized, just as it would be summarized by a human. Summarizing long articles, such as scientific articles, is quite difficult due to token restraint and extraction of scientific words. To address this problem, a novel Graph-Based Abstractive Summa-rization (GBAS) model is proposed, which is a novel scientific text summarization model based on SciBERT and the graph transformer network (GTN). The document's integrity is maintained since the SciIE system uses the graph structure to create a terminology-based document structure. Therefore, long documents are also summarized. The proposed model is compared with baseline models and human evaluation. Human evaluation results show that the results of the proposed model are informative, fluent, and consistent with the ground-truth summary. The experimental results indicate that the proposed model outperforms baseline models with a 37.10 and 34.96 ROUGE-L score.

In this paper, we succeed to discover the new exact wave solutions to the truncated M-fractional complex three coupled Maccari’s system by utilizing the Sardar sub-equation scheme. The obtained solutions are in the form of trigonometric and hyperbolic forms. These solutions have many applications in nonlinear optics, fiber optics, deep water-waves, plasma physics, mathematical physics, fluid mechanics, hydrodynamics and engineering where the propagation of nonlinear waves is important. Achieved solutions are verified with the use of Mathematica software. Some of the achieved solutions are also described graphically by 2-dimensional, 3-dimensional and contour plots with the help of Maple software. The gained solutions are helpful for the further development of concerned model. Finally, this technique is simple, fruitful and reliable to handle the nonlinear FPDEs.

Prime number-related issues can be viewed from drastically different perspectives by examining the close connections between prime numbers and composite numbers. We think that multiple perspectives are the pillars on the path to solutions so we have created this study. As a result of the study, we proposed two new formulas by presenting three theorems and one proof for each theorem, a total of three proofs. We proved that the formula p · n + p returns a composite number in the first of the theorems, which is the preliminary theorem. Our first theorem except the preliminary theorem is that the formula p · n + p returns all composite numbers, and we proved that too. Finally, we created Theorem II using Theorem I to use in our other work and proved that the formula 2 · n · p + p returns all odd composite numbers, which is Theorem II. Afterward, we presented the similarities of the 2 · n · p + p formula we put forth with another known formula.

The present-day financial system is being influenced by the rapid development of Fintech (financial technologies), which are technologies created to improve and automate traditional forms of finance for businesses and consumers. The topic of Fintech as a financial disruptor is gaining popularity in line with the swift spread of digitalization across the banking industry, whereby this paper contributes to the field by presenting a novel bibliometric analysis of academic literature related to Fintech as a financial disruptor. The analysis is based on metadata extracted from the Scopus database through the VOSviewer and Biblioshiny software. The bibliometric analysis of 363 documents identified the most impactful sources of publication, keywords, authors, and most cited documents on the topic of Fintech as a financial disruptor. As our analysis demonstrates the number of publications on the given topic increases, defining both the interest among academia and potential for future research.

As we embrace the new normal in the aftermath of Covid-19, the year 2020 also marks the decade of action as we start the 10-year countdown to achieving the Sustainable Development Goals (SDGs) by 2030. In this paper, we attempt to explore the extent to which the hardly won development gains over the last years could be reversed due to the unfolding COVID-19 global pandemic, how do we reboot the global response to accelerate the SDGs in times of uncertainties, and most importantly how to turn the recovery into an opportunity to build back better and more resilient economies. To do so, we examine the case of blockchain as one of the emerging innovative work-streams in development practices that could lead the way forward and pave the path for new developmental narratives as we all navigate the uncharted territories of the new digital age.

Background: Coronavirus disease 2019 (COVID-19) remains a mystery in many respects. The importance of less common life-threatening diseases is still unclear. Therefore, in this study, it was attempted to determine the frequency of nontraumatic hemothorax, chylothorax, pleural, and pericardial effusion (PCE) in patients who underwent thoracic computed tomography during the pre-pandemic and pandemic period. Materials and Methods: This retrospective study included 147 patients over the age of 18 who were admitted to the emergency department between January 1st, 2019, and December 31st, 2020. The year 2019 was taken as the pre-pandemic period and the year 2020 was the pandemic period. Comorbidity, survival, and laboratory parameters of the patients were evaluated. Results: The mean age of the 147 patients included in the study was 66.41 ± 12.81 years, 54 (36.7%) were female, and the age range was 22–88 years. The mean plasma lactate dehydrogenase (LDH) level of the patients was 373.97 ± 115.77 U/L, plasma protein was 5.45 ± 1.00 gr/dL, fluid LDH was 229.37 ± 125.73 U/L, fluid/plasma LDH was 0.60 ± 0.23, fluid/plasma protein was 0.55 ± 0.29, and the amount of fluid discharged was 562.11 ± 243.01 mL. Bilateral lung involvement was present in 72 (49%) patients, and coagulation use was present in 59 (40.1%) patients. Pleural effusion (PE) was found in 43 (76.8%) of the hospitalized patients, hemothorax in 11 (19.6%) patients, and chylothorax in 4 (7.1%) patients. However, PCE was more common in the 16 (42.1%) patients admitted to the intensive care unit (ICU) (P < 0.001). While 38 (25.9%) of the patients were admitted to the ICU, mortality was observed in 30 (20.4%) patients. Conclusion: Although PE, nontraumatic hemothorax, chylothorax, and PCE are rare in COVID-19 patients, they can cause severe inflammation and poor prognosis.

This article discusses the impact of new financial technologies, such as Non-Fungible Tokens (NFTs) on traditional industries such as art, sports, and game, while focusing on the recently formed "Metaverse" market. As a component of the overall blockchain ecosystem, the history of the establishment of NFT is analyzed. The impact of Web3 and intelligent contracts on Fintech are also investigated. This study examines the general trends in the NFTs market, including their price formation, price-influencing factors, and available patterns. Then the paper provides classifications and examples of NTFs. Besides, the technological application and primary technical path are also described. Later, the paper assesses the market's and marketplaces' accessibility. Finally, this study evaluates the management applications of NFTs and analyzes existing platforms, and demonstrates how they can be implemented effectively in various settings. The concluding portion discusses technological obstacles. The study concludes with a discussion of potential applications for the results and prospects for future research.

The digital twin (DT) research field is experiencing rapid expansion, yet the research in industrial practices in this area remains poorly understood. This paper aims to address this knowledge gap by sharing feedback and future requirements from the manufacturing industry. The methodology employed in this study involves an examination of a survey that received 99 responses and interviews with 14 experts from 10 prominent UK organisations, most of which are in the defence industry in the UK. The survey and interviews explored topics such as DT design, return on investment, drivers, inhibitors, and future directions for DT development in manufacturing. The study findings indicate that DTs should possess characteristics such as adaptability, scalability, interoperability, and the ability to support assets throughout their entire life cycle. On average, completed DT projects reach the break-even point in less than two years. The primary motivators behind DT development were identified to be autonomy, customer satisfaction, safety, awareness, optimisation, and sustainability. Meanwhile, the main obstacles include a lack of expertise, funding, and interoperability. The study concludes that the federation of twins and a paradigm shift in industrial thinking are essential components for the future of DT development.

The intention to repurchase is a key component in relationship marketing. However, minimal attention has been paid to how customers’ habitual behavior moderates the relationship between customers’ evaluation of benefits received from a service provider and the intention to revisit, specifically in a personal service business where customer-service provider interactions likely constitute the core of a sustainable relationship. To address this gap, the current study proposes and tests a comprehensive model to advance the theory of relationship marketing (RM) and additionally contributes to social exchange theory (SET) as well as the theory of repurchase decision-making (TRD) in the business service context. Structural equation modeling (SEM) was employed to examine the relationships of the research model. Based on data collected from 482 customers on their perceptions of hairstylists, the empirical findings revealed that relational benefits significantly affect post-experience behavior-satisfaction, trust and relationship commitment, and subsequently boost the intention to revisit. Furthermore, habit as an unconscious factor moderates the paths between revisit intention and its determinants. Although several limitations exist, the findings practically and theoretically make a contribution to the literature on relationship marketing.

This study examined the accumulations and transfer of manganese into 11 wild plants from the mining soils of Gümüşköy, Turkey. The greatest silver resource in Turkey is found in the Gümüsköy mining area, which is situated roughly 25 kilometers to the west of Kütahya. ICP-MS was used to determine the Mn contents in soil and plant samples that were taken from the field. In the research area, the average Mn concentrations in the soil, roots, and shoots of wild plants were 1872, 1076, and 1048 ppm, respectively. Based on their ECS and ECR values, the plants were divided into three groups: the best plants, good plants, and candidate plants. While Glaucium flavum, Carduus nutans, Phlomis sp., Onosma sp., and Verbascum thapsus were selected as the best plants, Cynoglossum officinale, Anchusa arvensis were determined as good plants, and the others (Alyssum saxatile, Centaurea cyanus, Silene compacta, Isatis were determined as candidate plants. According to the current study, all of the best and good plants in the study region had a very high ability to remove Mn. As a result, these plants can be helpful in studies involving phytoremediation or remediation of Mn-polluted soil.

Hyperlipidemia is an identified risk factor for metabolic syndrome, obesity and cardiovascular complications characterized by elevated levels of lipids in blood. The present study aimed to inhibit HMG-CoA reductase with 15-oxoursolic acid through in-vivo and in-silico assessments. HFD-induced hyperlipidemia in rats was developed with a marked increase in total cholesterol (58.34 ± 0.21 mg/dl), triglycerides (45.45 ± 0.39 mg/dl), LDL-c (66.12 ± 0.10 mg/dl), VLDL-c (19.34 ± 0.16 mg/dl), and a decrease in HDL-c (10.34 ± 0.18 mg/dl). The oral administration of 15-oxoursolic acid at a concentration of 30 mg/Kg b.w significantly reduced the serum concentration of total cholesterol (42.65 ± 0.54 mg/dl), triglycerides (32.33 ± 0.16 mg/dl), LDL-c (50.34 ± 0.15 mg/dl) and VLDL-c (13.15 ± 0.45 mg/dl) respectively and an increased in the serum HDL-c (18.56 ± 0.34 mg/dl). 15-oxo ursolic acid also caused a decrease in the coronary risk index and atherogenic risk index. In-silico studies of 15-oxoursolic acid with HMG-CoA reductase showed significant interaction capability with binding energy (-9.26805 Kcal/mol). It is concluded that 15-oxoursolic acid could significantly reduce the total cholesterol, triglycerides and LDL levels in HFD-induced hyperlipidemia rats which might lead to new medication with significant hypolipidemic potential.

Neuro-rehabilitation services are essential in reducing post-stroke impairments, enhancing independence, and improving recovery in hospital and post-discharge. However these services are therapist-dependent and resource intensive. Patients’ disengagement and boredom in stroke units are common which adversely affect functional and psychological outcomes. Novel techniques such as use of iPads™ are increasingly researched to overcome such challenges. The aim of this review is to determine the feasibility, effectiveness, acceptability, and barriers to the use of iPads™ in stroke neuro-rehabilitation. Four databases and manual literature search were used to identify published studies using the terms “iPad”, “Stroke”, and “neuro-rehabilitation”. Studies were included in accordance with the review selection criteria. A total of 16 articles were included in the review. The majority of the studies focused on iPads use in speech and language therapy. Although of small scale, the studies highlighted that iPads are feasible, have the potential to improve rehabilitation outcomes, and can improve patient’s social isolation. Patients’ stroke severity and financial limitations are some of the barriers highlighted in this review. This review presents preliminary data supportive for the use of iPad technology in stroke neuro-rehabilitation. However, further research is needed to determine impact on rehabilitation goals acquisition, clinical efficacy, and cost-efficiency.

Pakistan relies mostly on fossil fuel for fulfilling its energy demand which is expensive as 11 well as not friendly for the environment. The need of the hour is to shift from fossil fuels to renew-12 able energy resources like geothermal, wind, solar etc. to cater for global warming issues. Pakistan 13 has a lot of potential geothermal sites because of several fault lines and hot springs. A sound 14 knowledge of ground temperature is essential to use geothermal energy, which is obtained by drill-15 ing boreholes and putting sensors making it an expensive procedure. Thus, to avoid huge cost for 16 drilling bore holes, particularly for ground temperature analysis, a numerical approach has been 17 considered for determining ground temperature. Furthermore, correlation charts between air and 18 ground temperatures have been developed as there were no proper studies on the ground temper-19 ature of Pakistan. Then, with the help of a boreholes drilled in National University of Sciences and 20 Technology Islamabad Pakistan, the actual ground and numerically calculated temperatures have 21 been compared which shows an error margin in the range between 0.27% for higher depths to 7.3% 22 near surface. Thus, it is shown that the proposed method is easy to implement and better than large 23 scale testing methods for the depths at which geothermal energy is extracted.

For most people, using social media to research products has become common. Despite previous research, there is a gap in understanding reviewers' product-related comments and how they lead to purchase intentions. In terms of contributions, this study analyses people's dependence on social media for product information in purchase intention while considering the moderating impact of risk and trust on the link between purchase intention and social media. The data were collected quantitatively using surveys. The sample consisted of 384 students. The study hypotheses were tested using the PROCESS macro after exploratory factor analysis and correlation analysis were conducted. Among those surveyed, it was confirmed that most people sought product-related comments on social media when seeking information about a product they might be interested in purchasing. It was also observed that the risk factor reduced the impact of other variables in the model presented in this study. In conclusion, this investigation is more reliable, and its outcomes benefit scholars, supervisors, merchants, and webmasters, for instance, in establishing a study for future research efforts and providing practical guidance that could boost promotional efforts and marketing activities, especially in this era of artificial intelligence.

In this study, the corrosion performances of ammonium copper quat (ACQ) and boric acid (BA) wood preservatives were investigated, with micronized copper quat (MCQ) and nano boron (NB) used as reference materials. In the study, Scots pine (Pinus sylvestris L.) wood samples were impregnated according to the full-cell process method with ACQ at 2.4% concentration, BA at 4% and MCQ and NB at 1%. The ACQ- and BA-impregnated samples were then impregnated for a second time using five different water-repellent materials: tall oil, linseed oil, sodium silicate, methyl hydrogen silicone and N'-N- (1, 8-Naphthalyl) hydroxylamine. Polyethylene glycol (PEG) 600 and aluminum sulfate were introduced as single impregnations in the form of homogeneous mixtures with the ACQ and BA. The corrosion properties of the impregnated and control samples, including metal weight loss (MWL) and corrosion depth, were examined. As a result, the MWL values of the ACQ-impregnated samples showed an increase compared to the control group. The MWL values of the MCQ-impregnated samples were lower than those of the samples impregnated with ACQ, whilst the MWL values of the BA-impregnated samples were higher than those of the samples impregnated with NB.

The aim were to determine the drinking water preferences of people applied to a family health center. This cross-sectional study was carried out from April 01st to May 31st, 2022. The data were evaluated using the chi-square test and percent ratios with a significant of P < 0.05. The mean age of all 432 respondents was 48.03±15.86. It was determined that those aged 31-45 had drunk more bottled water (p<0.01) and more spring water (p<0.001), that those aged 65 and over more purified water (p<0.001), that women more tap water (p<0.001), that married people had drunk more demijohn and tap water (p<0.001, each one), that divorced/widows had drunk more packaged and purified water (p<0.001, each one), that the illiterate/literate bottled water (p<0.001, per one), that those who had no income/people who lived on the state or municipal assistance only carboy water (p<0.001). This study suggests that the biggest factor that positively affected the drinking water preference was the packaging of the water. However, the drinking rates of mains water and spring water were quite low. Convincing the authorities to make the mains water drinkable is of great importance in terms of overcoming the public's distrust of mains water.

As the world is striving to recover from the shockwaves triggered by the Covid-19 crisis, all hands are needed on deck to transition towards a green recovery and make peace with nature as prerequisites of a global sustainable development pathway. In this paper, we examine the blockchain hype and the gaps in data and tools to build promising use cases for blockchain technology to accelerate global efforts in the decade of action towards achieving the SDGs. We attempted to break the hype-cycle portraying blockchain’s superiority by navigating a rational blockchain use case development approach. By prototyping an SDG Acceleration Scorecard to use blockchain-enabled solutions as SDG accelerators, we aim to provide useful insights towards developing an integrated approach that is fit-for-purpose to guide organizations and practitioners in their quest to make informed decisions to design and implement blockchain-backed solutions as SDG accelerators. Acknowledging the limitations in prototyping such tools, we believe these are minimally viable products and should be considered as living tools that can further evolve as the blockchain technology is getting mature, its pace of adoption increasing, and its lessons learned, good practices and standards widely shared and internalized by teams and organizations working on innovation for development.

This work aims to investigate the effect of Pt concentration on crystal growth mechanism of Platinum-Palladium (Pt-Pd) binary alloy system during the annealing process starting from amorphous phase until some definite temperatures. The calculations have been performed by using molecular dynamic (MD) simulations. Interatomic interactions are described by on Sutton-Chen type Embedded Atom Potential Energy function. In order to understand the main structural properties at the stable and unstable phases, changes in RDF curves versus time have been analysed for different annealing temperatures. Crystalline type bonded pairs have been determined using MD calculations which is required for the computation of Avrami coefficients and for understanding crystal growth mechanism. The results demonstrate that the increase in concentration of Pt during annealing leads to migration of atoms in the crystal lattice points, elimination of dislocations and formation of perfect crystal structure.

Herbal Coffee is getting more popular due to its unique flavor and higher concentration of bioactive compounds, mainly polyphenols. Rosemary is a unique herb with potent antioxidant properties. A green technique called ultrasound aids in releasing bioactive substances from the plant cell wall. In this context, ultrasound-assisted herbal coffee prepared and their anti-diabetic, anti-Alzheimer, and antioxidant activities were measured while the LC/MS was used to determine the bioactive components from the herbal coffee infusion. A total of 95 secondary metabolites were putatively reported, including alkaloids, phenolic acids, and flavonoids, which we identified in the herbal coffee infusion. The total phenolic content (61.5 ± 5.1 mg GAE/g), total flavonoid content (19.3 ± 0.9 mg QE/g), and total condensed tannin (7.6 ± 0.7 mg CE/g) of herbal coffee infusion were observed to be highest of the two remaining samples. The herbal coffee extracts were used to determine all samples' antioxidant, anti-diabetic, and anti-Alzheimer activities. Using LC-MS/MS, we semi-quantified 19 phenolic metabolites. The results show numerous bioactive components in herbal coffee infusion with more potent antioxidant, antidiabetic, and anti-Alzheimer potential. Moreover, more studies must be conducted to confirm how the metabolomic profile of herbal coffee affects its flavor profile.

Breaching and liquefaction are two types of coastal flow slides proposed in the literature. While their final results are similar, liquefaction and breaching failure are two different processes, with breaching failure characterized by a different progression and sand movement mechanisms. In densely packed sand, breaching causes delayed sand grain discharge and negative excess pore pressures. Liquefaction, when a mass of soil suddenly behaves like a liquid, flow out over overly gentle slopes. Flow slides typically go unnoticed until the slope fails above ground because they start below the water. Without modern technology, diving equipment, risk assessment, and probabilistic and sensitivity assessments, flow slides inherently challenging. The authors developed a new sensitivity index to detect the susceptibility of coastal flow slides. It was established a sophisticated hybrid model that accommodates flow slides in sync with unpredictable variables employed in this new sensitivity index. Innovative hybrid model has three distinctive models. The Hybrid Hydrodynamic Model addresses wave, wind, current, climate change, and sediment transfer. The Monte Carlo Simulation analyses sensitivity, and the Bayesian Network calculates joint probability of coastal flow slide parameters of this new index that includes environmental characteristics, including climate change. With the assistance of these three models, researchers aim at a) presenting a methodology for coupling coastal flow slide projections with outcomes; b) distinguishing two flow slides; c) examining variables influencing flow slides. The use of such a hybrid model and risk index offers a robust and computationally efficient approach to evaluating the critical angle slope for breaching failure.

Estimation of the potential consequences from events occurring downstream of a dam are part of the risk assessment needed during the installation phase of a new dam. In case of specific Natural or Man Made ongoing or prospected events, it may be also important to carry out fast computations that can provide information on the areas at risk either because the original design analyses are not available or because the parameters needed are different. This study is aimed to develop a procedure that strongly facilitates the preparation of the input deck and the derivation of the output quantities to allow a fast analysis of a dam break event using a shallow water model, NAMI DANCE, as the analysis tool.

Background and aim: The albumin-globulin ratio (AGR) is one of the indicators of inflammation and immunity and it has a prognostic significance in many malignant diseases. Previous studies have shown the relationship between inflammatory mediators and POPF. This study aimed to evaluate the relation of AGR, which is a relatively new indicator, with postoperative pancreatic fistula (POPF). Methods: Pancreaticoduodenectomy (PD) patients between 2017 and 2020 were retrospectively analyzed and divided into two groups as those with and without clinically relevant POPF (CR-POPF). They were compared in terms of preoperative-postoperative AGR and clinicodemographic characteristics. AGR was calculated as Albumin / (Total protein-albumin) and the cutoff point for AGR was determined according to Youden’s index. Results: CR-POPF developed in 21% of 121 patients who underwent PD. There was no difference between the groups in terms of age, gender, comorbid disease status, pancreatic duct width, and anastomosis technique. Preoperative and postoperative day-3 (POD3) albumin levels and AGR were found to be significantly lower in the CR-POPF group. Multivariate analysis showed that AGR and pancreatic tissue stiffness are independent risk factors for the development of POPF. Conclusions: Low AGR is an independent risk factor for the development of CR-POPF. To reduce the incidence of POPF, this ratio should be tried to be kept at an optimal level.

Blockchain is a path-breaking paradigm, and cryptocurrencies are one of the main application areas of Blockchain technology. Bitcoin leads the cryptocurrency markets, both in terms of market capitalization and in scientific interest. In this paper, we performed a comprehensive bibliometric study of the Bitcoin-related literature. Using the Scopus database, we created a sample that comprises 4495 documents written in the 2011–2020 period. Furthermore, we provided insights about dimensions such as the change in the number of publications over the course of years, the main research areas, types of published documents, most important platforms and sources of Bitcoin publications, highly cited studies, productive authors, author’s countries, and finally main funders of Bitcoin-related research. Lastly, our bibliometric study manifests the current state and future path of Bitcoin literature from distinct perspectives.

Water is essential for living organisms. The increase in world population, global climate change and rapid growth in industrialization and urbanization have brought with them water issues around the world in recent years. Not only should existing water resources be used reasonably and efficiently but alternative water resources should also be explored and secured. Rainwater harvesting, which is one of the alternative water resources, can provide economic and environmental solutions. For rainwater harvesting, the size of reservoirs in which rainwater captured from roof catchments is stored should be determined. Determining the optimum tank capacity depending on precipitation and consumption rates allows us to make maximum use of rainwater tanks. The aim of this study is to determine the optimum tank capacity for the storage of rainwater captured from roof catchments in order to meet the water demand for agricultural production. Precipitation data were collected from the city of Isparta and its districts. Rainwater tank capacity was determined using the Rippl, residual mass curve, minimum flow and particle swarm optimization methods. Storage capacities varying according to roof areas and consumption rates are shown in a graph. Results show that particle swarm optimization is the best method.

First, a brief overview is provided on humanoid robots, and also models for the dynamic behavior are discussed. As base for these models these two methods Denavit-Hartenberg and Newton-Euler are used. Main aim of this work is to investigate the stability of a biped robot developed from IHRT. There is currently the low base of robot - consisting of feet, legs, hips and upper part of robots body. This structure currently has ten degrees of freedom.

This study utilizes the Random Forest technique to investigate risk management practices and concerns in Islamic banks using survey data from 2016 to 2021. Findings reveal that larger banks provide more consistent survey responses, driven by their confidence and larger survey budgets. Moreover, a positive link is established between a country's development, characterized by high GDPs and low inflation and interest rates, and the precision of Islamic banks' survey responses. Analyzing risk-related concerns, the study notes a significant reduction in credit portfolio risk, attributed to improved risk management practices, global economic growth, stricter regulations, and diversified asset portfolios. Concerns related to terrorism financing and cybersecurity risks have also decreased due to better enforcement of anti-money laundering regulations and investments in cybersecurity infrastructure and education. This research enhances our understanding of risk management in Islamic banks, highlighting the impact of bank size and country development. Additionally, it emphasizes the need for ongoing analysis beyond 2021 to account for potential COVID-19 effects and evolving risk management and regulatory practices in Islamic banking.

Collaborative robots (cobots) have largely replaced conventional industrial robots in today’s workplaces, particularly in manufacturing setups due to their improved performance and intelligent design. In the framework of Industry 5.0, humans are working alongside cobots to accomplish the required level of automation. However, human-robot interaction has brought up concerns regarding human factors (HF) and ergonomics. A human worker may experience cognitive stress as a result of cobots' irresponsive nature in unpredictably occurring situations, which adversely affects productivity. Therefore, there is a necessity to measure stress to enhance a human worker’s performance in a human-robot collaborative environment. In this study, factory workers’ mental workload has been assessed using physiological, behavioural, and subjective measures. Electroencephalography (EEG) and functional near-infrared spectroscopy (fNIRS) signals have been collected to acquire brain signals and track hemodynamic activity, respectively. The effect of task complexity, cobot’s movement speed, and cobot’s payload capacity on the mental stress of a human worker have been observed, for a task designed in the context of a smart factory. Task complexity and cobot’s speed have proved to be more impactful. As physiological measures are unbiased and more authentic means to estimate stress, eventually, they may replace the other conventional measures if they prove to correlate with the results of traditional ones. Here, regression and artificial neural networks (ANN) have been utilised to determine the correlation between physiological data and subjective and behavioural measures. Regression has performed better for most of the targets and the best correlation (rsq-adj = 0.654146) has been achieved for predicting missed beeps, behavioural measure, using a combination of multiple EEG and fNIRS predictors. The k-nearest neighbours (KNN) algorithm has been used to evaluate the accuracy of correlation between traditional measures and physiological variables, with highest accuracy of 77.8% achieved for missed beeps as the target. Results show that physiological measures can be more insightful and have the tendency to replace other biased parameters.

This paper explores the capability of various machine learning algorithms, including Random Forests and advanced gradient boosting techniques such as XGBoost, LightGBM, and CatBoost, to predict customer churn in the telecommunications sector. For this analysis, a dataset available to the public was employed. The performance of these algorithms was assessed using recognized metrics, including Accuracy, Precision, Recall, F1-score, and the Receiver Operating Characteristic Area Under Curve (ROC AUC). These metrics were evaluated at different phases: subsequent to data preprocessing and feature selection; following the application of SMOTE and ADASYN sampling methods; and after conducting hyperparameter tuning on the data that had been adjusted by SMOTE and ADASYN. The outcomes underscore the notable efficiency of upsampling techniques such as SMOTE and ADASYN in addressing the imbalance inherent in customer churn prediction. Notably, the application of random grid search for hyperparameter optimization did not significantly alter the results, which remained comparatively unchanged. The algorithms' performance post- ADASYN application marginally surpassed that observed after SMOTE application. Remarkably, LightGBM achieved an exceptional F1-score of 89% and an ROC AUC of 95% subsequent to the ADASYN sampling technique. This underlines the effectiveness of advanced boosting algorithms and upsampling methods like SMOTE and ADASYN in navigating the complexities of imbalanced datasets and intricate feature interdependencies.

This study explores the implications of merging two fundamentally different types of banks: Islamic and conventional banks. The research aims to provide insight into such a merger's unique opportunities and challenges and offer strategic guidance for future mergers. A balanced scorecard-based strategic analysis using Quantum Spherical Fuzzy Decision-Making Approach was used to develop the merged bank's short- and long-term strategic plans. The balanced scorecard included 12 key performance indicators (KPIs) in 4 groups, and the methodology also incorporated several questions to guide the analysis. The study results offer valuable insights into the potential opportunities and challenges of merging these two types of banks and strategic recommendations for stakeholders at all levels. The study is a valuable guideline for future mergers between similar or different types of banks. Overall, the findings suggest that a well-planned merger strategy is essential for avoiding challenges and maximizing the benefits of merging Islamic and conventional banks. By integrating the strengths of both types of banks, a merged entity could create a competitive advantage and potentially improve financial performance. However, this requires careful consideration of cultural differences, regulatory challenges, and other factors that could impact the merger's success.

Abstract: Uranium is a toxic radioactive element and is usually found in the environment in hexavalent form. It has become a necessity to remove uranium, which can enter the environment in excessive amounts through nuclear industrial activities, from access waters. Melamine formaldehyde organo clay nano composite foam (MFCNCF) was prepared as a novel adsorbent by hardening with thermal treatment. Structural, crystallographic textural and surface morphological characterization of the prepared adsorbent was made by FTIR and XRD spectroscopic and SEM and HRTEM microscopic techniques. This study aims to investigate the adsorption of U(VI) from aqueous solution by MF organo clay nanocomposite and its dependence on various variables such as initial uranium concentration, adsorption time, adsorbent dosage, initial pH, and temperature. Additionally, adsorption isotherm analysis and adsorption kinetics and thermodynamics were also examined. For this purpose, the batch adsorption experiments were carried out and the equilibrium concentration of U(VI) in the aqueous solution was measured with a UV-Vis spectrophotometer at a wavelength of 433 nm, which corresponds to its maximum absorptivity. The results regarding adsorption kinetics show that 30 min is sufficient to reach adsorption equilibrium and the data show a high fit to the pseudo-second-order kinetic model. Isotherm analysis also revealed a high fit of the data to the Type III isotherm and the Halsey model. Based on this fit, an adsorption mechanism involving two regions (electrostatic and complex formation) was proposed for the current adsorption system. The adsorption isosteric enthalpy and entropy values for the first and second regions are 3.65 and -51.02kJ/mol and 1.77 and -167.28J/mol, respectively. It was found in kmol. Experimental results showed that the prepared nanocomposite foam adsorbent is an effective and potential alternative for the effective removal of U(VI) from aqueous solutions.

Inflammatory bowel diseases, familial adenomatous polyposis (FAP) and colorectal cancer (CRC) are associated with alterations of the intestinal microbiota. However, few data are available on the perpetuation of FAP and ulcerative colitis (UC) in relation to microbial dysbiosis. This study evaluated the UC and genetically confirmed FAP patients’ gut microbial balance in concordance to clinical outcome. Fecal materials (average mass of 0.54 g) were collected from three FAP and five UC patients to compare with healthy individuals as control group. Genomic materials of micro-biota were isolated for next generation sequencing of 16S rRNA that was performed by using QIAseq 16S/ITS panel in Illumina Miseq Platform. Data processing and bioinformatics analysis were performed via CLC Genomic Workbench bioinformatics tool. The comparison between FAP, UC and control group revealed an alteration in the intestinal microbial composition. More in details, relative abundance of class levels showed statistical significance differences among FAP, UC and control groups. Our preliminary data focused on the explanation of how dysbiosis can lead to inflammation and drive processes together with host genetic profile that leads to colorectal carcinogenesis.

In this study, an alternative method to conventional production methods involving thin section copper permanent mould casting (rapid solidification), hot rolling and heat treatment processes to manufacture AISI DC 53 cold work tool steel, has been investigated. In this new method, solidification of the AISI DC 53 was done in the thin section copper mould instead of traditional ingot casting. After solidification, thin slabs obtained was homogenized to 1150 ^oC and hold at this temperature for one hour and then hot rolling was be applied. During hot rolling process, about % 30 reduction in thickness of slab was obtained. After hot rolling, heat treatment (austenitizing, quenching and tempering) have been applied to thin slab. The samples have been taken as cast, as rolled and as heat treated (austenitized and tempered) and the microstructural analysis, hardness tests, retained austenite quantity measurement by XRD method have been performed. The heat treatment and tests have been performed for a commercially available AISI DC 53 which is manufactured by thick section ingot casting and rolling. Hardness values of the AISI DC 53 steels produced by traditional route is in the range of 52-54 HRC after austenitization at 1025 ^oC for one hour and quenched in compressed air and tempered twice at 525 ^oC for 120 mins. On contrary the permanent mould cast AISI DC 53 after homogenization at 1150 ^oC and immediately hot rolling then air cooling and austenitized at 1025 ^oC for one hour then quenched by compressed air and tempered twice at 525 ^oC for 120 mins have hardness valeus in the range of 55-57 HRC. Experiments have revealed that the properties of new rapid solidified steel in permanent copper mould are better than the commercially available steel and have a more refined microstructure than commercially produces alternative. Therefore, the new proposed method can be used as an alternative manufacturing method for cold-work tool steels.

Fifty-eight Karacabey Merino lambs were used to evaluate the effects of feeding system (triticale pasture, oat pasture, or stall fed), birth type (single or multiple), gender (male or female) and birth year (2016 or 2017) on various carcass and meat quality characteristics. Stall lambs had higher conformation (CS) and fatness scores (FS), meat L* and h* values than both pasture groups, possibly as a result of higher fat content, while oat pasture lambs had the most tender meat. Single lambs had higher CS, FS and Longissimus thoracis muscle section area, while females had higher subcutaneous and non-carcass fat depositions, over their counterparts. Both single born lambs and 2016 born lambs had a higher meat a* and C* values than their counterparts. In conclusion, a pasture-based feeding system is thought to be more suitable for Karacabey Merino than stall feeding system, for those who prefer leaner meat and/or meat products. However, it should not be ignored that stall fed lambs showed a better fattening performance in terms of conformation and fatness, in the same period.

Holographic subsurface radar (HSR) is currently not in widespread usage. This is due to an historical perspective in the ground penetrating radar (GPR) community that the high attenuation of electromagnetic waves in most media of interest, and the inability to apply time-varying gain to the continuous wave (CW) HSR signal precludes sufficient effective penetration depth. While it is true that the fundamental physics of HSR, with its use of a CW signal, does not allow amplification of later (i.e. deeper) arrivals in lossy media (as is possible with impulse subsurface radar — ISR), HSR has distinct some distinctive advantages. The most important of these is the ability to do shallow subsurface imaging with a resolution that is not possible with ISR. In addition, the design of an HSR system is simpler than for ISR due to the relatively low-tech transmitting and receiving antennae. This paper provides a review of the main principles of HSR through an optical analogy and describes possible algorithms for radar hologram reconstruction. We also present a review of the history of development of systems and applications for HSR of the “RASCAN” type which is possibly the only holographic subsurface radar that is produced in lots. Among the subsurface imaging and remote sensing applications considered are humanitarian demining, construction inspection, surveys of historic architecture and artworks, nondestructive testing of dielectric aerospace materials, security applications, paleontology, detection of wood-boring insect damage, and others. Each application is illustrated with relevant data acquired in laboratory and/or field experiments.

Holographic subsurface radar (HSR) is currently not in widespread usage. This is due to an historical perspective in the ground penetrating radar (GPR) community that the high attenuation of electromagnetic waves in most media of interest, and the inability to apply time-varying gain to the continuous wave (CW) HSR signal precludes sufficient effective penetration depth. While it is true that the fundamental physics of HSR, with its use of a CW signal, does not allow amplification of later (i.e. deeper) arrivals in lossy media (as is possible with impulse subsurface radar — ISR), HSR has distinct some distinctive advantages. The most important of these is the ability to do shallow subsurface imaging with a resolution that is not possible with ISR. In addition, the design of an HSR system is simpler than for ISR due to the relatively low-tech transmitting and receiving antennae. This paper provides a review of the main principles of HSR through an optical analogy and describes possible algorithms for radar hologram reconstruction. We also present a review of the history of development of systems and applications for HSR of the “RASCAN” type which is possibly the only holographic subsurface radar that is produced in lots. Among the subsurface imaging and remote sensing applications considered are humanitarian demining, construction inspection, surveys of historic architecture and artworks, nondestructive testing of dielectric aerospace materials, security applications, paleontology, detection of wood-boring insect damage, and others. Each application is illustrated with relevant data acquired in laboratory and/or field experiments.

Synthetic materials such as Carbon, Kevlar, and Glass fibers are extensively utilized in various industries due to their superior characteristics including high stiffness, great strength, low den-sity, and high wear resistance, these advantages contributed to making them widespread in ap-plications like; aerospace, automobile, civil and electronics. This research is carried out to enhance the creep compliance of epoxy composite material by considering two types of fibers as reinforcement. A composite material is produced by combining two fibers, Kevlar fiber mixed with sika epoxy resin, along with Carbon fiber also mixed with sika epoxy resin using a Hand-Layup process. Experiments and numerical modeling are examined to offer a comprehensive understanding creep behavior of epoxy composite material in different weight ratios. Burger and Prony models are used to represent stress relaxation and creep strain of Visco-elastic material. According to the results, sika epoxy resin reinforced with Kevlar and Carbon fibers exhibits enhancement in the mechanical properties compared with pure epoxy. The use of Kev-lar/Sika epoxy composite results in higher creep compliance and modulus of elasticity compared with Carbon/Sika epoxy composite.

A recent breakthrough in preparation of immobilized enzyme based biocatalysts achieving highly enhanced enzymatic activities and stabilities has become a great alternative to conventional immobilization techniques. The functional hybrid nanobiocatalysts (FHNs) fabricated in this immobilization composed of organic components (amino acid, peptide, protein, enzyme and plant extract) and inorganic components (various metal ions) give flower-like morphology with narrow size distribution and porous structure. The enzyme incorporated FHNs exhibite greatly enhanced catalytic activities and stabilities compared to free and conventionally immobilized enzymes under various experimental conditions. In addition to that, the FHNs consisting of other organic components act as Fenton-like reagents and show peroxidase-like activity owing to presence of metal ions and porous structure in the FHNs. This report basically focuses on preparation, characterization, and bioanalytical applications of the FHNs and explain mechanism of the FHNs formation and thier enhanced activities and stabilities.

One of the most important objectives of the studies worldwide is to improve the performance of automotive engines to reduce fuel consumption and environmental pollution. Accordingly, the principal motivation of this research study is improving the tribological behavior of the piston ring/cylinder liner interfaces as a promising and straightforward approach in automotive fuel economy and increasing engine durability using Al₂O₃ and TiO₂ nanomaterials as smart nano-lubricant additives that adapted to different operating conditions by replenishing mechanisms anti-friction and anti-wear in automotive engines.

The aim of this research work is to study the influence of temperature, solar irradiation and wind dust on the production of solar energy. In addition, it aims to study the assessment of water quality, in particular groundwater used for cooling and cleaning photovoltaic panels (quality analysis). it's an important source, stable and sustainable can be used entirely for cooling and cleaning PV modules from the sales dust, in order to improve their performance. To date, all research studies carried out in this context of cooling and cleaning using water have not taken account of the nature of this water. We have taken a sample of water from a well in a rural area in the Darra Tafilalet region of Morocco. This region has an arid and semi-arid climate, with very high temperatures and dust-laden winds, particularly in summer. These meteorological characteristics influence the efficiency of cells, particularly photovoltaic (PV) panels, reducing their performance. Next, the water sample was analysed in the laboratory. The results obtained show that the groundwater in this area is very sensitive to cooling and cleaning photovoltaic panels. Moreover, these results indicate that the temperature, solar irradiation and wind-blown dust have a significant influence on energy production.

Large-span post-tensioned (PT) beams play a crucial role in maximizing the benefits of post-tensioning techniques. Bonded and unbonded systems are prevalent, with the latter being more widespread in the United States. While bonded systems are advantageous for creating long spans when multiple tendons are grouped in ducts, limited literature exists on their demolition. In a case study, this paper addresses the unique challenge of demolishing large-span bonded post-tensioned beams due to a building's functional change. Emphasizing insights for engineers, it explores the use of cutting and dismantling methods, considering the presence of prestressed cables. The demolition process is distinctive due to the presence of numerous pre-stressed cables along the beams, necessitating a specialized and cautious cutting approach. This is accomplished through the use of a drilling technique that selectively distresses the tendons, ensuring they are not all affected simultaneously. An intriguing observation discussed in this paper pertains to the occurrence of horizontal cracks accompanied by loud sounds following the drilling process, offering insights from the design perspective of PT systems. The paper details an innovative method for safely demolishing large-span bonded PT beams, using ground-penetrating radar and computer models to navigate structural complexities and ensure nearby structures' safety.

Fe-(9, 19, 28, 37)wt.% Cr alloys were corroded at 700 and 800 ^oC for 70 h under 1 atm of N₂, 1 atm of N₂/3.2%H₂O-mixed gas, and 1 atm of N₂/3.1%H₂O/2.42%H₂S-mixed gas. The corrosion rate of Fe-9Cr alloy increased with the addition of H₂O, and furthermore with the addition of H₂S in N₂ gas. Fe-9Cr alloy was always nonprotective. In contrast, Fe-(19, 28, 37) wt.%Cr alloys were protective in N₂ and N₂/H₂O-mixed gas because of formation of the Cr₂O₃ layer. They were, however, nonprotective in N₂/H₂O/H₂S-mixed gas because sulfidation dominated to form the outer FeS layer and the inner Cr₂S₃ layer containing some FeCr₂S₄.

Although, promotion of urbanization culture in recent decades has made inevitable development of cities in the world, however, the development can be guided in a direction that leave, to the extent possible, minimum socioeconomic and environmental impacts. For this, it is required to first forecast auto-spreading orientation of cities and suburbs in rural areas over time and then avoid shapeless growth of cities. This paper is an attempt to develop a dynamic hybrid model based on logistic regression (LR), Markov chain (MC), and cellular automata (CA) for prediction of future urban sprawl in fast-growing cities. The model was developed using 12 widely-used urban development criteria, whose significant coefficient was determined by logistic regression, and validated by relative operating characteristic (ROC) analysis. The validated model was run in Guilan, a tourist province in northern Iran with a very high rate of urban development. For this, changes in the area of urban land use were detected over the period of 1989 to 2013 and then, future sprawl of the province was forecasted by the years 2025 and 2037. The analysis results revealed that the area of urban land use was increased by more than 1.7 % from 36012.5 ha in 1989 to 59754.8 ha in 2013, and the area of Caspian Hyrcanian forestland was reduced by 31628 ha. The results also predicted an alarming increase in the rate of urban development in the province by the years 2025 and 2037, during which urban land use is predicted to develop 0.9 % and 1.38 %, respectively. The development pattern is expected to be uneven and scattered, without following any particular direction. The development will occur close to the existing or newly-formed urban basements as well as around major roads and commercial areas. This development, if not controlled, will lead to the loss of 13863 ha of Hyrcanian forests and if the trend continues, 21013 ha of Hyrcanian forests and 20208 ha of Barren/open lands are expected to be destroyed by the year 2037. In general, the proposed model is an efficient tool for the support of urban planning decisions and facilitates the process of sustainable development of cities by providing decision-makers with an overview on future development of cities where the growth rate is very fast.

The application of metal-matrix composite coatings for protecting and improving the service life of sliding components has demonstrated to have the potentials of meeting the requirements of a diverse range of engineering industries. Recently, a significant body of research has been devoted to study the mechanical and tribological performance of dispersion-strengthened MCrAlY coatings. These coatings belong to a class of emerging wear-resistant materials, offering improved properties and being considered as promising candidates for the protection of engineering structural materials exposed to tribological damage, especially at elevated temperature regimes. This paper attempts to comprehensively review the different reinforcements used in the processing of MCrAlY-based alloys and how they influence the mechanical and tribological properties of the corresponding coatings. Further, the major fabrication techniques together with their benefits and challenges are also reviewed. Discussion on the failure mechanisms of these coatings as well as the main determining factors are also included. In addition, a comprehensive survey of studies and investigations in recent times are summarized and elaborated to further substantiate the review.

This paper analyzes the potential strategies for a bank merger from a Sustainable Development Goals (SDG) perspective, focusing on three key criteria: profitability, market share, and service quality. In the short-term, the merged bank should prioritize optimizing financial performance through cost management, revenue stream identification, and risk management practices. Market share expansion can be achieved through targeted customer acquisition and retention efforts, market research, and competitive analysis. Service quality can be enhanced through improved customer service, efficient complaint resolution processes, and leveraging technology. These short-term plans align the merged bank's operations with the identified criteria and promote responsible banking practices that contribute towards the SDGs. In the long-term, the merged bank should focus on diversifying revenue streams, expanding its customer base, and optimizing cost structure. Long-term strategies should include establishing a strong brand presence, customer loyalty programs, and continuous improvement in service quality. The paper emphasizes the importance of monitoring progress, making necessary adjustments, and aligning with SDGs for sustained profitability and long-term success in the marketplace. The findings of this study provide valuable insights for banks considering a merger and highlight the significance of considering SDGs in their strategic planning.

In this article, we calculate the deflection angle of tidal charged black hole (TCBH) in weak field limits. First we obtain the Gaussian optical curvature and then apply the Gauss-Bonnet theorem on it. With the help of Gibbons-Werner method, we are able to calculate the light's deflection angle by TCBH in weak field limits. After calculating the deflection angle of light, we check the graphical behavior of TCBH. Moreover, we further find the light's deflection angle in the presence of plasma medium and also check the graphical behavior in the presence of plasma medium. Moreover, we investigate the shadow of TCBH.For calculating the shadow, we first find the null geodesics around the TCBH and then find its shadow radius. We also obtain TCBH's shadow in the plasma medium. Hence, we discuss the shadow of the TCBH using the $M87^{*}$ parameters announced by the Event Horizon Telescope.

This review paper explores auditory tactile (AT) synesthesia, a rare neurological condition where sounds evoke tactile sensations. The paper provides a historical overview of the condition and discusses its epidemiology, with a prevalence of less than 1% of the general population. The neurological basis of AT synesthesia is explored, including the role of cross-modal processing and hyperconnectivity within the brain. The paper also describes the phenomenology of the condition, including the range of tactile sensations that can be experienced in response to different sounds. The occurrence of AT synesthesia in the present-day world is discussed, including its relationship to music and art. Various hypotheses surrounding the development and maintenance of AT synesthesia are reviewed, focusing on genetic and environmental factors. The implications for clinical practice are explored, including potential benefits for individuals with sensory processing disorders. Finally, the paper concludes with a discussion of future directions for research in this field, including the need to explore further the underlying neural mechanisms of AT synesthesia and potential therapeutic interventions.

By using Modified simple equation method, we study the Cahn Allen equation which arises in many scientific applications such as mathematical biology, quantum mechanics and plasma physics. As a result, the existence of solitary wave solutions of the Cahn Allen equation is obtained. Exact explicit solutions interms of hyperbolic solutions of the associated Cahn Allen equation are characterized with some free parameters. Finally, the variety of structure and graphical representation make the dynamics of the equations visible and provides the mathematical foundation in mathematical biology, quantum mechanics and plasma physics.

This paper investigates an innovative photovoltaic cell configuration, denoted as “Au/CuSCN/RbGeI3/CdTe/ZnO/TiO2/FTO", using SCAPS-1D simulation. The research focuses on optimizing device performance by analyzing key components, including ZnO as the electron transport layer (ETL), RbGeI3 as the perovskite absorber layer, CuSCN as the hole transport layer (HTL), and CdTe as the active buffer layer. A comparison is made with the standard “Au/CuSCN/CH3NH3SnI3/CdTe/ZnO/TiO2/FTO" configuration under dark and illuminated conditions. Through an in-depth investigation involving temperature effects, generation rate analysis, RbGeI3 absorber layer thickness, Nd level, and interface defect levels, an optimized design for a unit area is achieved. The proposed solar cell demonstrates outstanding performance metrics, including an open circuit voltage (Voc) of 0.94V, a short circuit current density (Jsc) of 34.52mA/cm2, a fill factor (FF) of 77.77%, and an energy conversion efficiency (η) of 25.40%. These values significantly outperform the reference models with energy conversion efficiencies of 10.11% and 21.09%. Real-world applicability is validated by implementing these optimized characteristics in a photovoltaic system for Pakistan’s geographical location using PVSyst software. The suggested solar cell achieves a remarkable performance ratio (PR) of 85.6%, surpassing the PR of the reference basic solar cell model at 83%. The findings of this research offer a promising and superior solar cell design, incorporating innovative materials and optimization techniques to achieve exceptional energy conversion efficiency and overall performance. This study’s outcomes have the potential to advance photovoltaic technology and contribute to sustainable energy solutions worldwide.

In this paper, we calculate the deflection angle of photon by Casimir wormhole in the weak field limit approximation. First we calculate Gaussian optical curvature with the help of optical spacetime geometry and so we use the Gauss-Bonnet theorem on the Gaussian optical metric. Then we find the deflection angle of photon by Casimir wormhole. Moreover, we calculate the photon's deflection angle in the presence of plasma medium and we also see the graphical nature of deflection angle in both cases. Second, we move towards the shadow of Casimir wormhole. After the observations of Event Horizon Telescope, the study of shadow become very important so that we plot the shapes of shadow of Casimir wormhole, and we calculate the photon geodesic around the Casimir wormhole.

Technology is in the way to reach in its climax but the basic understanding of science in many phenomena is still awaited even though the nature witnesses it. Scientific research reveals strong analogy between photon and electron. When an atom deals neutral state, it levitates electron of outer ring from the back surface while placing the bit-energy at front surface. Gravitation behavior of that electron starts at the centre of relaxation point by including the force of side pole where the pulling force of nearby unfilled state of that atom from the front surface results into depict forcing energy shape like Gaussian distribution symbol with both ends turned called unit photon. The inertia is being involved at each stage of changing direction of that electron by introducing the disappearances of forces of two poles against the appearances of forces of two opposite poles during rest to motion and motion to rest in the first half-cycle. The same is the case in the second half-cycle of that electron during rest to motion and motion to rest but it is under different introduction of the disappearances of forces against appearances of forces. However, at stage of levitating or gravitating period of electron, only one force is being involved at one time where the opposite force is disappeared. The uninterrupted confined inter-state electron-dynamics of atom under the availability of several bits of bit-energy results into generate forcing energy shape like a wave. Two bits of bit-energy where shape of bit for first half-cycle is like integral symbol and second half-cycle is like opposite integral symbol which are being placed along the configuring trajectory of inter-state electron-dynamics during forward-direction cycle and two bits of bit-energy shape in opposite order are being placed along the trajectory of inter-state electron-dynamics during back-direction cycle. Generating forcing energy of unit photon in each cycle is pushing to the rear side by remaining connected till the electron is not restoring the state of rest. Silicon atom is considered as a model system under neutral state. Uninterrupted confined inter-state electron-dynamics result into generate forcing energy that can travel immeasurable length and unavailability of necessitating bit-energy at any interrupted stage result into generate an overt photon. Inter-state electron-dynamics for at least two cycles generate an overt photon –a photon length twice to unit photon. Under certain interaction of unit photon, it divides equally into two bits of bit-energy instead of dividing into tits and bits of heat. The mechanism of generating photon characteristic current by the electron of neutral state atom validates that atoms are four-dimensional discs at centre of dealing no force. An isolated electron is being grounded under directed forcing energy to impinge a neutral state atom where the gained instantaneous velocity under merged energy resulting into distort atom at that point. Matter changes the role of energy and force under various sorts of interactions. Here, heat energy and photon energy explore matter at atomic and electron levels, thus, devise basis of science to describe.

The present review aims to investigate the effect of alveolar bone grafting in canine impacted unilateral cleft lip and palate patients. The goal of this review is to identify and highlight the factors that may cause maxillary canine impaction, the role of primary and secondary bone graft and dental anomalies that may affect canine impaction in patients with cleft lip and palate.

This article presents new PEM fuel cell models with hexagonal and pentagonal designs. After observing cell performance improvement in these models, we optimized them. Inlet pressure and temperature were used as input parameters, and consumption and output power were the target parameters of the multi-objective optimization algorithm. Then we used artificial intelligence techniques, including deep neural networks and polynomial regression, to model the data. Next, we employed the RSM (Response Surface Method) method to derive the target functions. Furthermore, we applied the NSGA-II multi-objective genetic algorithm to optimize the targets. Compared to the base model (Cubic), the optimized Pentagonal and Hexagonal models averagely increase the output current density by 21.819\% and 39.931\%, respectively.

Meningitis is a severe disease associated with death in children under five with highest rates of infections under age of one. Vaccines for Neisseria meningitides and Haemophilus influenza are used to prevent the main causative agents of meningitis. Administration of H. influenzae type b (Hib) vaccine is recommended at 2, 4 and 6 months with a booster dose at 18 months. N. meningitidis has two commercially available vaccines, the pure polysaccharide is recommended at 24 months meanwhile the protein-conjugated vaccines at 12 months. We sought in this study to examine if coadministering the vaccines for the two main meningitis causing bacteria might be synergistic as a preliminary step towards the possibility of shuffling immunization schedule. So, we coadministered Hib vaccine with commercially available vaccines either quadrate (ACWY) polysaccharide meningococcal (Men) or conjugated meningococcal (Nim) vaccines in Balb/C mice (n = 6/group) and compared to each vaccine administered separately and controls. Thirty-five days post immunization, we measured specific antibodies titers. Hib vaccine increased Men antibody titers significantly for serotypes Y and W. When Hib vaccine was coadministrated with Nim, antibody titer for Y, W and A significantly increased. For serotype C, there was no significant difference in antibody titers among immunized groups. As for effect of meningococcal vaccines on Hib, Men significantly increased Hib antibody titers while Nim had no effect. Collectively, our data suggested that coadministration of Hib and Men or Nim vaccines was safe and had synergistic effect on immune responses elicited to both vaccines. Further studies are needed before immunization schedule modifications. Such immunization schedule recommendation should provide better protection against this life-threatening disease in young children.

Managers play an important role in driving the progress and progression of businesses, specifi-cally in the perspective of risky and long-term innovation. While organizational theories have acknowledged the influence of managers on strategic change, there is still a need to expand our interpretation of the global managerial abilities that drive innovation in the emerging fintech based economy. This study aims to address this research gap by leveraging the GDMC theory. It posits that GDMC (i.e., Global dynamic Managerial capabilities), encompassing managerial social capital, human capital, and cognition, directly contributes to the innovativeness of fintech firms. To investigate this relationship, the study utilized survey data obtained from Jordon manufac-turing firms operating in the context of Industry 4.0. Through regression analysis, the data were analyzed to gain insights and draw meaningful conclusions. The findings of the study affirm the significant role played by GDMC in facilitating innovation. Notably, the results deviate from previous research conducted in non-digital industries, suggesting that it is the combined set of global innovation mic capabilities that drives innovativeness in fintech firms. This study provides compelling indication for the crucial role of GDMC in the fintech based economy, challenging previous findings in non-fintech industries regarding the individual impact of managers' human capital, social capital, and cognition on innovation. In addition, this study contributes significantly to the existing literature by conducting a comprehensive examination of the effects of GDMC on innovation in fintech firms. It stands out as the first study to holistically explore this relationship, providing a nuanced understanding of the impact of GDMC. Consequently, the applicability of the GDMC theory is extended to the fintech economy.

In this research, the primary goal was to investigate the relationship between strategic planning and organizational performance in Iraq's manufacturing context. The study's primary data sources were 360 manager respondents. The structured questionnaire was used to collect primary data from manufacturing firms located throughout Iraq. To analyze the result, the researcher used descriptive statistics, correlation, and multiple regression analysis. SPSS version 16 software was used to conduct data analysis. The result reveals that the process of strategic planning has a beneficial effect on financial performance. Environmental scanning has a statistically significant positive effect on a company's non-financial performance. Management participation and planning formality positively and statistically significantly affect a business's non-financial performance at the 10 percent level. The domain of strategy and technique has not impacted the company's non-financial performance.

Sustainability is a characteristic manifested in the ability to maintain the necessary level of performance for construction companies when risk factors arise during the implementation of investment and construction projects. The risk factors that arise during the implementation of in-vestment and construction projects differ in nature, degree of influence, and other characteristics. Ignoring these factors and measures to manage them often leads to critical consequences in the form of disruptions in the timing of work. Risk is a combination of the probability and consequences of the occurrence of adverse events. The article considers the concept of risk as a potential possibility of occurrence of adverse situations and related consequences when exposed to these factors. Risk factors are characterized by surprise, discreteness of changes, the presence of threshold values, upon reaching which a transition to a different mode of operation is required. The article discusses the risk factors arising at the construction stage, their classification. A methodology has been developed that includes conducting a survey in the form of a questionnaire in order to collect information about risk factors that affect the implementation of investment and construction projects. Experts with experience in the construction sector were involved in the survey. The processing of the survey results made it possible to assess the significance of various risk factors in investment and construction projects. Thus, statistical and expert methods were used in the study. The results showed that financial, technical, legal, economic, managerial and natural factors have the greatest impact on investment and construction projects. It is recommended to pay special attention to the listed factors when developing measures aimed at preventing risks and their consequences. The methodology described in the study can be used by construction companies in strategic planning. The analysis of the stability of construction companies, depending on their use of various ways to counteract risk factors, allowed us to develop a number of practical recommendations to reduce the impact of the studied factors on achieving the goals of investment and construction projects.

Background and objectives: Contrast-induced nephropathy (CIN), is an acute renal damage due to contrast agents. This study is conducted to determine the potential diagnostic value of hypoxia-inducible factor 2-alpha (HIF2-α) and to evaluate the renal protective effects of N-acetyl cysteine (NAC) and sildenafil in a rat CIN model. Material/Methods: This randomized, controlled, interventional animal study was conducted on Wistar rats. Totally, rats (n = 36) were randomly assigned to four groups: control (n = 9), CIN group (n = 9), CIN+NAC group (n = 9), and sildenafil (n = 9). The rat model was used to form iohexol-originated CIN. During the modelling, prophylactic treatment was performed at 24th and 48th hours. After 48 hours of the modelling; blood, urine, tissue samples were obtained for biochemical analyses. HIF-2-α levels were measured in renal tissue, serum and urine samples. Renal sections were performed in order for histopathologic and immunohistochemical evaluations. Results: In the CIN model, HIF-2α levels and other biochemical parameters were significantly increased (p < 0.01). Both sildenafil and NAC, efficiently decreased the renal damage due to contrast agents (p < 0.05). Similarly, after treatment with sildenafil and NAC, HIF-2α levels were significantly decreased (p < 0.05). Conclusions: The current study constructs an experimental base for the use of HIF-2α for clinical prevention and treatment of CIN. Several mechanisms may be postulated for the changes in HIF-2α levels. Besides, the increased HIF-2α levels with CIN and decreased HIF-2α levels after treatment may be used for the treatment and follow-up of patients with CIN.

Neuroscience is a vast discipline that deals with the anatomy, biochemistry, molecular biology, physiology and pathophysiology of central and peripheral nerves. Advances made through basic, translational, and clinical research in the field of neuroscience have great potential for long-lasting and beneficial impacts on human health. The emerging field of biological therapy is intersecting with the disciplines of neuroscience and rheumatology, creating new horizons for interdisciplinary and applied research. Biological drugs, growth factors, neuropeptides and monoclonal antibodies are being developed and tested for the treatment of painful arthritic and rheumatic diseases. This concise communication focuses on the solutions provided by the fields of neuroscience and neuroimmunology for real-world clinical problems in the field of rheumatology, focusing on synovial joint pain and the emerging biological treatments that specifically target pathways implicated in osteoarthritis pain in peripheral nerves.

The world is progressing towards a more advanced society where end-consumers have access to local renewable-based generation and advanced forms of information and technology. Hence, it is in a current state of transition between the traditional approach to power generation and distribution, where end-consumers of electricity have typically been inactive in their involvement with energy markets and a new approach that integrates their active participation. This new approach includes the use of distributed energy resources (DER) such as renewable-based generations and demand response (DR), which are being rapidly adopted by end-consumers, where incentives are strong. This paper presents the role of DR aggregator to effectively integrate DER technologies as a new source of energy capacity, into the electricity networks using information communication technology and industry knowledge. This framework based on DR aggregators will facilitate renewable energy integration and customer engagement in electricity market efficiently. To this aim, advantages and disadvantages of DR aggregators are discussed in this paper from political, economic, social and technological (PEST) point of views. Based on this analysis, a strengths, weaknesses, opportunities, and threats (SWOT) analysis for a typical DR aggregator is presented.

Many studies discuss carbon-based materials because of the versatility of its element. They include different opinions for scientific problems and discuss fairly at convincing and compelling levels within the scope and application. A gas-state carbon atom converts into various states depending on its conditions of processing. The electron transfer mechanism in the gas-state carbon atom is responsible to convert it into various states, namely, graphite, nanotube, fullerene, diamond, lonsdaleite and graphene. The shape of ‘energy trajectory’ enables transferring electrons from the left- and right-sides of an atom is like a parabola. That ‘energy trajectory’ is linked to states (filled state and suitable nearby unfilled state) where force-exertion along the poles of transferring electrons is remained balance. So, the mechanism of originating different states of a gas-state carbon atom is under the involvement of energy first. This is not the case for atoms executing confined inter-state electron-dynamics as the force is involved first. Graphite-, nanotube- and fullerene-state atoms ‘partially evolve partially develop’ (form) their structures. These possess one-dimensional, two-dimensional and four-dimensional ordering of atoms, respectively. Their structural formation also comprises ‘energy curve’ having a shape-like parabola. Transferring suitable filled state electron to suitable nearby unfilled state is under a balance force exerting along the poles. The graphite structure under only attained-dynamics of atoms can also be formed but in two-dimension. Here, binding energy between graphite-state carbon atoms is for a small difference of exerting forces along their opposite poles. Structural formation in diamond, lonsdaleite and graphene atoms involve energy to gain required infinitesimal displacements of electrons through which they maintain orientationally-controlled exerting forces along dedicated poles. In this study, the growth of diamond is found to be south to east-west (ground) where atoms bound ground to south. Thus, diamond atoms merge for a tetra-electron ground to south topological structure. Lonsdaleite atoms merge for a bi-electron ground to just-south topological structure. The growth of graphene is found to be north to ground where atoms bound ground to north. Thus, graphene atoms merge for a tetra-electron ground to north topological structure. Glassy carbon exhibits layered-topological structure where, tri-layers of gas-, graphite- and lonsdaleite-state atoms successively bind in repetitive order. Nanoscale hardness is also sketched based on different force-energy behaviors of different state carbon atoms. Here, structure evolution in each carbon state atom explores its own science.

ADHD, a neurodevelopmental condition, is distinguished by a triad of symptoms including inattention, hyperactivity, and impulsivity. It is frequently accompanied by comorbidities such as anxiety, depression, and learning disabilities. As a result, clinicians often face challenges in accurately diagnosing ADHD and differentiating it from other conditions. As a prospective remedy for ADHD, scientists have investigated Transcranial Direct Current Stimulation (tDCS), a non-invasive technique of stimulating the brain. It involves applying low-intensity electrical currents to specific regions of the brain to modulate neural activity. This review paper aims to provide an overview of the comorbidities associated with ADHD and the differential diagnosis of the condition. It also explores the potential of tDCS as a treatment option for ADHD, including its mechanisms of action and efficacy in improving ADHD symptoms. The comorbidities discussed in this review include anxiety disorders, mood disorders, and substance use disorders. These comorbidities are frequently seen in individuals with ADHD and can complicate the diagnosis and treatment of the condition. The paper also highlights the importance of considering comorbidities when assessing ADHD, as well as the potential impact of these conditions on treatment outcomes. The differential diagnosis section of the paper explores conditions that can present with symptoms similar to ADHD, such as anxiety disorders, mood disorders, and learning disabilities. It emphasizes the need for a thorough assessment and differential diagnosis to identify ADHD and differentiate it from other conditions accurately. The final section of the paper discusses the potential of tDCS as a treatment option for ADHD. It examines the mechanisms of action of tDCS and its efficacy in improving ADHD symptoms, including attention, hyperactivity, and impulsivity. It also explores the potential for tDCS to improve comorbid conditions associated with ADHD. Overall, this review provides a comprehensive overview of comorbidities and differential diagnoses in ADHD and the potential of tDCS as a treatment option. The paper highlights the importance of a thorough assessment and personalized treatment plan for individuals with ADHD, particularly those with comorbidities.

The poultry industry is affected by many epidemics and Newcastle Disease (ND) is a constant threat, known as a devastating disease for poultry farmers around the world. According to the average death time of chicken embryos, virus strains can be classified as lentogenic, mesogenic, or velogenic. The current research will clarify the vulnerable host range as well as the epidemiology and geographic distribution of ND in Pakistan. The introduction of the virus into poultry can have serious economic consequences, including the loss of production of sick and dying poultry, the cost of control measures (such as population reduction and disinfection measures), and possible trade restrictions in the event of an outbreak. The virus is transmitted by direct contact with sick poultry or carriers. Infected birds can also spread the virus in their feces. It can also be spread through respiratory secretions, contaminated feed, equipment, water, or feces. We will also discuss vaccines that which vaccines are available for NDV in Pakistan and vaccines can fight against this disease or not? In this study, a qualitative risk analysis was carried out to assess Pakistan's vulnerability to the introduction of virulent NDV strains

Sources are classified into two depending upon the factor of reviving. These sources, which cannot be revived into their original shape once they are consumed, are considered as nonrenewable energy resources, i.e., (coal, fuel) Moreover, those energy resources which are revivable to the original condition even after being consumed are known as renewable energy resources, i.e., (wind, solar, hydel) Renewable energy is a cost-effective way to generate clean and green electrical energy Now a day’s majority of the countries are paying heed to energy generation from RES Pakistan is mostly relying on conventional energy resources which are mostly nonrenewable in nature coal, fuel is one of the major resources, and with the advent of time their prices are increasing on the other hand RES have great potential in the country with the deployment of RES greater reliability and an effective power system can be obtained In this thesis, a similar concept is being used and a hybrid power system is proposed which is composed of intermixing of renewable and nonrenewable sources The Source side is composed of solar, wind, fuel cells which will be used in an optimal manner to serve load The goal is to provide an economical, reliable, uninterruptable power supply. This is achieved by optimal controller (PI, PD, PID, FOPID) Optimization techniques are applied to the controllers to achieve the desired results. Advanced algorithms (Particle swarm optimization, Flower Pollination Algorithm) will be used to extract the desired output from the controller Detailed comparison in the form of tables and results will be provided, which will highlight the efficiency of the proposed system.

In this paper, we study quantum gravity effect on the symmergent black hole which is derived from quadratic-curvature gravity. To do so, we use the Klein-Gordon equation which is modified by generalized uncertainty principle (GUP). After solving the field equations, we examine the symmergent black hole's tunneling and Hawking temperature. We explore the graphs of the temperature through the outer horizon to check the GUP influenced conditions of symmergent black hole stability. We also explain how symmergent black holes behave physically when influenced by quantum gravity. The impacts of thermal fluctuations on the thermodynamics of a symmergent black holes spacetime are examined. We first evaluate the model under consideration's thermodynamic properties, such as its Hawking temperature, angular velocity, entropy, and electric potential. We evaluate the logarithmic correction terms for entropy around the equilibrium state in order to examine the impacts of thermal fluctuations. In the presence of these correction terms, we also examine the viability of the first law of thermodynamics. Finally, we evaluate the system's stability using the Hessian matrix and heat capacity. It is determined that a stable model is generated by logarithmic corrections arising from thermal fluctuations.

We demonstrate a new quantitative method to the sieve of Eratosthenes, which is an alternative to the sieve of Legendre. In this method, every element of a given set is sifted out once only, and therefore, this method is free of the Mobius function and of the parity barrier. Using this method, we prove that every sufficiently large even number is the sum of two primes, and that every even number is the difference of two primes in infinitely many ways.

The treatment of insulin-dependent diabetes mellitus is characterized by artificial supplementation of pancreatic β-cell ability to regulate sugar levels in the blood. Even though various insulin analogs are crucial for reasonable glycemic control, understanding the dynamic mechanism of the insulin analogs may help to improve the best-protracted insulin analog to assist people with Type 1 Diabetes (T1D) to live comfortably while maintaining tight glycemic control. Here we present the high-resolution crystal structure of NN304, known as insulin detemir, to 1.7 A resolution at cryogenic temperature. We computationally further investigated our crystal structure's monomeric-dimeric conformation and dynamic profile by comparing it with a previously available detemir structure (PDB ID: 1XDA). Our structure (PDB ID: 8HGZ) obtained at elevated pH provides a distinct alternative dimeric conformation compared to the previous structure, suggesting it might induce an intermediate state in the dissociation pathway of the insulin detemir’s hexamer:dihexamer equilibrium. Combined with orientational cross-correlation analysis by Gaussian Network Model (GNM), this alternate oligomeric conformation offers the distinct cooperative motions of a protracted insulin analog that has not been previously observed.

Rare earths are classified as most important and critical material for US economy and defense by Congress and a mandate has been set to increase their in-house production, domestic resource utilization and decrease reliance on foreign resources and reserves. They are widely available in earth crust as ore (bastnaesite (La, Ce)FCO₃, monazite, (Ce, La, Y, Th)PO₄, and xenotime, YPO₄), but their so-called economic reserves are sparsely located geographically. They may be produced by various means such as beneficiation (physical, chemical, mechanical, or electrical), reduction (direct or indirect), electrolysis (of aqueous or molten / fused single or mixed salt systems) at high temperature or hydrometallurgy. Out of these, direct reduction also known as metallothermic reduction (La and Ca reduction) is mostly utilized. Its variant, high temperature electrowinning of fused salts is also practiced widely. These processes are material and application specific. In this study, author will employ thermodynamics (Ellingham diagrams, free energy of formation, reduction potential, Nernst equation, Pourbaix (E_h-pH) diagrams, E-pO^-2 diagrams), kinetics and energetic of a chemical reaction (chemical metallurgy) to reduce rare earth oxide / salt to rare earth metals (REO/RES – REM). It is shown that materials and energy requirement vary greatly depending on type of mineral ore, production facility, and beneficiation / mineral processing method selected. Aim is to reduce dependence on coal deposits. It is anticipated this route will be able to produce rare earths with > 35% yield and > 98% purity which be described in subsequent studies and patents.

This research aims to explore the complex interplay between supply chain resilience (SCR), digital supply chain (DSC), and sustainability, focusing on the moderating influence of supply chain dynamism. The goal is to understand how these elements interact within the framework of contemporary supply chain management and how they collectively contribute to enhancing sustainability outcomes. The sample size is 300 CEOs and managers. The study approach integrates quantitative research methods. Structural equation modeling (SEM) is utilized to quantitatively analyze the direct and indirect effects of SCR and DSC on sustainability. The numerous surveys we conduct among supply chain ecosystem stakeholders provide a rich picture of practical implications and contextual nuances. In sum, our early findings generally support a positive relationship between SCR and sustainability in and of itself decrying the need for more resilient supply networks for sustainability. We further find the beneficial impact of digital technologies in promoting sustainability via enhancing environmental control and controlling for efficiency in supply chains. We also offer evidence to show that supply chain dynamism compounds the positive logic between SCR and DSC and sustainability. As a final word, it must be noted that our work speaks to the burgeoning Supply Chain Dynamism as moderator literature by examining the direct and contingent effects of SCR and DSC on not only performance but sustainability. By shedding light on the moderating role of dynamism, the study provides fresh insights into the multifaceted nature of supply chain management and sustainability practices. The study's findings enhance theoretical understanding by elucidating the synergistic effects of SCR, DSC, and sustainability in dynamic supply chain settings. It augments existing theoretical frameworks by integrating concepts of resilience, digitalization, and sustainability into a comprehensive model. Practical and economical, the research offers actionable guidance for organizations aiming to improve sustainability performance through resilient and digitally advanced supply chains. By acknowledging the role of supply chain dynamism, managers can tailor strategies to manage disruptions effectively and leverage digital innovations. Economically, adopting sustainable practices can result in cost savings and competitive advantages. The research emphasizes the importance of aligning supply chain strategies with sustainability goals to drive long-term value and societal impact.

Recently, environmental degradation has become an international issue due to the extensive economic activities around the globe. This aspect demands the policymakers' and new researchers’ emphasis. Hence, the present article examines the impact of corporate social responsibilities (CSR) to community and environment on the environmental performance (ENP) of the manufacturing industry in China. The article also investigates the mediating role of green innovation and environmental strategy among CSR to community, CSR to environment and ENP of manufacturing industry in China. The article gets the primary data from the selected employees of the manufacturing industry using questionnaires. The article also tests the data's validity and reliability, and association among variables using smart-PLS. The outcomes indicated that CSR to environment has a positive association with ENP. The outcomes also revealed that green innovation and environmental strategy significantly mediate among CSR to community, CSR to environment and ENP. The article guides the policymakers in making policies related to improve ENP using CSR to environment and green innovation.

Businesses now formally enter the phase of "think power differentiation and gap" in response to the new economic climate. While AI, big data, empowerment via the internet, and other aspects of the digital economy help to improve technical capabilities and save operating costs, they also push businesses to innovate their strategies at a faster rate. Enterprises are strategically choosing to de-enterprise, moving from focusing on a single business functioning benefit to building an ecosystem of platform services that will give them a competitive edge. Additionally, the organization's structure is evolving continually from a vertical model to a curved working style, in order to achieve this, businesses must recognize the importance of data analysis in day-to-day management and operations, encourage the development of an organizational atmosphere that is driven by data, fully utilize digital technology, modularize areas or production links that perform related tasks, and encourage the reform of organizational structures. By streamlining the output of the product or service to the external community while also enhancing the company's financial performance model, switching from process-to result-oriented evaluation, and putting in place a customized authority and accountability framework. Replace outcome-focused evaluation with process-focused evaluation, and create a customized incentive scheme that balances power, accountability, and rewards.

This paper presents Mathematical Formulation for Neutrino-Fission of a heavy nuclei in Neutrino-environments. It has been proposed that neutrino fission is a dynamic two-process reaction, where more than one neutrino can be captured by target nucleus. A quantity named Neutrino-Zeta with units of eV^-1 has been defined to represent Neutrino-environments. Neutrino-zeta with assumed excited energy states for heavy nuclei A∼230-270 is estimated to be 0.0212 MeV^-1, with the probability of fission Barrier energy state P(E_x,f)= 0.169064014 with E_x,f =6MeV. P(E_x,f)=0.222664 is highest at zeta=0.1MeV^-1 . It has been shown that probabilities of certain excitation energy states and their corresponding decay reactions at those excitation energies can be equal for two neutrino-zetas. Neutron induced fission for different neutrinos hypothesize that probability of symmetric fission channels is higher at low neutrino-zetas, which can be tested experimentally.

Classical methods for inverse problems are mainly based on regularization theory. In particular those which are based on optimization of a criterion with two parts: a data-model matching and a regularization term. Different choices for these two terms and great number of optimization algorithms have been proposed. When these two terms are distance or divergence measures, they can have a Bayesian Maximum A Posteriori (MAP) interpretation where these two terms correspond, respectively, to the likelihood and prior probability models.

We study a localization of gravity through the matching point between non-inertial frames and local inertial frames. This localization of gravity is done through defining relative gravitational red-shift. This lead to an emergence of a timeless state in a mathematically consistent way. In this timeless state of gravity, we find a geometric interpretation of the speed of light and mass. The experimental support of the timeless state is the quantum entanglement and internal symmetries that are independent of time. Therefore gravity would be responsible for measurements independent of time including quantum entanglement. Timeless state in that sense explain why do we have gravity/gauge correspondence. We conjecture that the universe emerged from a black hole with a global $SU(3)\times SU(2)\times U(1)$ symmetry on its event horizon that produces gauge fields Electromagnetism, weak and strong nuclear force through localization of this global symmetry. Through the localization in the gravity field, the timeless measurements such as spin will be correlated with the varying of timeless measurement which is relative gravitational red-shift. We present a gravitational or geometric interpretation of spin-0, spin-1, and spin-1/2 states. We present an interpretation of why do we measure matter rather than anti-matter. We found that the Higgs scalar field is represented by the gravitational red-shift at every point in the space around the black hole. We derive the numerical value of the cosmological constant that agrees with experimental observations.

This letter aims to show the connection between the sinc approximation for high-energy absorption cross section and the shadow radius of the spherically symmetric black hole. This connection can give a physical interpretation of the absorption cross section in the eikonal limit parameters. Moreover, the use of this alternative way, one can extract its shadow radius from the absorption cross section in high energy limits to gain more information about the black hole spacetime. Our results indicate that the increasing the value of the shadow radius of the black hole, exponentially increase the the absorption cross section of the black hole in high-energy limits which can be captured by the Event Horizon Telescope (EHT) collaboration.

Olfactory ensheathing cells (OECs) are the glial cells that accompany axons from the olfactory epithelium to their targets in the olfactory bulb. They possess unique features that have made them the subject of much study as being potentially useful in cell-based therapeutic approaches to CNS repair. Investigation of OECs has demonstrated antigenic and morphological heterogeneity in their population. No marker specific to and selective for OECs have yet been identified, and many of the markers used are variably expressed by other glial cells. Even among OECs, these markers appear to vary in vivo (depending on their anatomical location, contact with other cells, and developmental timing) and in vitro. The variation across the population of OECs has compromised their isolation and characterization. It has also made the task of identifying meaningful subpopulations - with greater or lesser therapeutic utility - dependent on identifying the source of their variability. Such information would aid in both the harvest and experimental manipulation of OECs to optimize their therapeutic effect. One way to understand the nature of this variability is to seek its potential causes in vivo. This must begin with an examination of the structure of the olfactory nerve. Here, the structure and development of the primary olfactory projection are thoroughly reviewed with an emphasis on OECs and the cells with which they make contact. The relevant experimental results are also discussed. The weight of anatomical evidence indicates that the structural variations described in different locations and across species are mostly the result of spatiotemporal developmental factors. As such, the formation of the olfactory projection is mediated primarily by the source tissue, the olfactory epithelium. Cell-autonomous development is common elsewhere, and suits the evolutionary age and importance of olfaction, as well as its continued regenerative capacity. Our findings provide a more systematic anatomical understanding of this nerve. That understanding indicates that variation in axon ensheathment by OECs is an inherent feature arising from the flexibility of the ensheathing program. This perspective, along with the anatomical data reviewed here, can inform more carefully controlled laboratory investigations designed to uncover the detailed mechanisms governing OEC biology.

The 2030 global agenda of the United Nations emphasizes peace, human rights, gender equality, partnership, and women's empowerment. It balances the social, economic, and environmental dimensions of sustainable development. The SDG framework was designed to be integrated and indivisible, making the interconnections of 17 Goals and 169 Sustainable Development Goals Targets (SDTs) more complex that need extensive and intensive investigative research. Recent studies have increased on the interrelationships of SDGs, but none of these have focused on integrating Climate Change (CC), Sustainable Forest Management (SFM), and Information and Communication Technology (ICT), also known as CSI Nexus. This study aims to investigate and identify the 169 SDTs linked to CC, SFM, and ICT and assesses the significance of the relationships between these variables. The alignment of SDTs to CSI Nexus was identified through clustering and mapping techniques. The result argued that 56 SDTs are directly connected within CC+SFM+ICT, 16 within CC+SFM, one within SFM+ICT, and 51 within ICT+CC. Our result suggests that CC is significantly associated with SFM; however, ICT has no significant association with CC and SFM. It further asserts that the ICT and SFM have minimal influence on the SDG 2030 framework. The proposed CSI Nexus and SDTs Integration Framework was a science-informed guide for priority-setting, policy coherence, and decision-making supporting the 2030 Sustainable Development Goals. This study does not include interactions, network analysis and visualization, simulations, and modeling between SDG targets.

Urinary tract infections (UTIs) caused by Uropathogenic Escherichia coli (UPEC) are a serious healthcare concern that must be treated with appropriate antibiotic therapy. However, antibiotic resistance among UPEC strains is increasing, particularly among individuals with recurrent illness. The proliferation of Extended-Spectrum Beta-Lactamase (ESBL) generating UPEC, as well as the increase of UPEC strains that display resistance to several antimicrobial drugs, adds to the difficulty of managing UTIs. UPEC strain genetic variants have a significant influence in their capacity to resist antimicrobial agents and adapt to changing environments. Understanding the genomic landscape of developing UPEC strains is critical for understanding the genetic basis of their resistance. Furthermore, tracking these genetic strains is critical for identifying patterns of resistance spread, directing infection control efforts, and educating.