MicroRNAs are small non-coding RNAs that are implicated in several physiological processes such as cell development, proliferation, differentiation, apoptosis, immune response and angiogenesis. In the last couple of decades, several studies on miRNA profiling in OSCC have tried to associate miRNAs with clinical characteristics such as relapse, metastasis, and survival, however, the results have been found to vary considerably, sometimes even being contradictory. The main objective of our study was to analyse and verify miRNA expression in oral squamous cell carcinoma in a Spanish population. Second, we attempted to associate the identified deregulated miRNAs with molecular pathways. 8 Oral Squamous Cell Carcinoma patients and 8 healthy control samples were analysed by a microarray Affymetrix® miRNA 4.1 array plate and validated with 8 more cases using RT-qPCR. Deregulated miRNAs were studied using Diana Tools miRPath 3.0 to associate miRNA targets with molecular pathways. Microarray analysis identified 80 deregulated miRNAs (35 over-expressed and 45 under-expressed). Only miR-497-5p and miR-4417 maintained its deregulated expression after validation with qPCR. Among the molecular pathways in which deregulated miRNAs could be implicated, the most statistically significant pathway was ‘proteoglycans in cancer’. No relationship was found between miR-497-5p or miR-4417 expression and clinical or pathological parameters except of nodular affectation (high miR-4417 expression in patients with nodular affectation, p = 0.035) and radiotherapy (diminished miR-497-5p expression in patients who needed radiotherapy, p = 0.05). We have verified the altered expression of miR-497-5p and miR-4417 in Oral Squamous Cell Carcinoma samples and related the deregulated miRNAs with the ‘proteoglycans in cancer’ pathway.

The introduction of three single nucleotide mutations into the genome of the virulent RVFV ZH548 strain allows the rescue of a fully attenuated virus in mice (ZH548-rA2). These mutations are located in the viral genes encoding the RdRp and the non-structural protein NSs. This paper shows the results obtained after subcutaneous inoculation of ZH548-rA2 in adult sheep and subsequent challenge with the parental virus (ZH548-rC1). Inoculation with ZH548-rA2 virus caused no detectable clinical or pathological effect in sheep, whereas inoculation of the parental rC1 virus caused lesions compatible with viral infection characterized by the presence of scattered hepatic necrosis. Viral infection was confirmed by immunohistochemistry, with hepatocytes within the necrotic foci appearing as the main cells immunolabelled against viral antigen. Furthermore, inoculation of sheep with rA2 virus prevented the liver damage expected after rC1 virus inoculation, suggesting a protective efficacy in sheep which correlated with the induction of both humoral and cell mediated immune responses.

Directed Energy Deposition (DED) processes necessitate a consistent material flow to the melt pool, typically achieved through pneumatic conveying of metal powder via thin pipes. This study aims to record and analyze the multiphase fluid-solid flow. An experimental setup utilizing a high-speed camera and specialized optics was constructed, the flow through thin transparent pipes was recorded. The resulting information was analyzed and compared with coupled Computational Fluid Dynamics - Discrete Element Modeling (CFD-DEM) simulations, with special attention to the solids flow fluctuations. The paper details the experimental design, video analysis using Particle Tracking, and a novel method for deriving volumetric concentrations and flowrate from flat images. The findings confirm the accuracy of the CFD-DEM simulations and provide insights into the dynamics of pneumatic conveying, which could be used to enhance the efficiency of DED processes.

The COVID-19 pandemic has underscored the importance of swift responses and the necessity of dependable technologies for vaccine development. Our team previously developed a fast cloning system for the modified vaccinia virus Ankara (MVA) vaccine platform. In this study, we report the construction and preclinical testing of a recombinant MVA vaccine obtained using this system. We obtained recombinant MVA expressing the unmodified full-length SARS-CoV-2 spike (S) protein containing the D614G amino acid substitution (MVA-Sdg) and a version expressing a modified S protein containing amino acid substitutions designed to stabilize the protein a in a pre-fusion conformation (MVA-Spf). S protein expressed by MVA-Sdg was found to be expressed and correctly processed and transported to the cell surface, where it efficiently produced cell-cell fusion. Version Spf, however, was not proteolytically processed and despite being transported to the plasma membrane, it failed to induce cell-cell fusion. We assessed both vaccine candidates in prime-boost regimens in the susceptible transgenic K18-human angiotensin converting enzyme 2 (K18-hACE2) mice and in golden Syrian hamsters. Robust immunity and protection from disease was induced with either vaccine in both animal models. Remarkably, the MVA-Spf vaccine candidate produced higher levels of antibodies, a stronger T cell response, and a higher degree of protection from challenge. In addition, the levels of SARS-CoV-2 in the brain of MVA-Spf inoculated mice was decreased to undetectable levels. Those results add to our current experience and range of vaccine vectors and technologies for developing a safe and effective COVID-19 vaccine

Holographic subsurface radar (HSR) is currently not in widespread usage. This is due to an historical perspective in the ground penetrating radar (GPR) community that the high attenuation of electromagnetic waves in most media of interest, and the inability to apply time-varying gain to the continuous wave (CW) HSR signal precludes sufficient effective penetration depth. While it is true that the fundamental physics of HSR, with its use of a CW signal, does not allow amplification of later (i.e. deeper) arrivals in lossy media (as is possible with impulse subsurface radar — ISR), HSR has distinct some distinctive advantages. The most important of these is the ability to do shallow subsurface imaging with a resolution that is not possible with ISR. In addition, the design of an HSR system is simpler than for ISR due to the relatively low-tech transmitting and receiving antennae. This paper provides a review of the main principles of HSR through an optical analogy and describes possible algorithms for radar hologram reconstruction. We also present a review of the history of development of systems and applications for HSR of the “RASCAN” type which is possibly the only holographic subsurface radar that is produced in lots. Among the subsurface imaging and remote sensing applications considered are humanitarian demining, construction inspection, surveys of historic architecture and artworks, nondestructive testing of dielectric aerospace materials, security applications, paleontology, detection of wood-boring insect damage, and others. Each application is illustrated with relevant data acquired in laboratory and/or field experiments.

Holographic subsurface radar (HSR) is currently not in widespread usage. This is due to an historical perspective in the ground penetrating radar (GPR) community that the high attenuation of electromagnetic waves in most media of interest, and the inability to apply time-varying gain to the continuous wave (CW) HSR signal precludes sufficient effective penetration depth. While it is true that the fundamental physics of HSR, with its use of a CW signal, does not allow amplification of later (i.e. deeper) arrivals in lossy media (as is possible with impulse subsurface radar — ISR), HSR has distinct some distinctive advantages. The most important of these is the ability to do shallow subsurface imaging with a resolution that is not possible with ISR. In addition, the design of an HSR system is simpler than for ISR due to the relatively low-tech transmitting and receiving antennae. This paper provides a review of the main principles of HSR through an optical analogy and describes possible algorithms for radar hologram reconstruction. We also present a review of the history of development of systems and applications for HSR of the “RASCAN” type which is possibly the only holographic subsurface radar that is produced in lots. Among the subsurface imaging and remote sensing applications considered are humanitarian demining, construction inspection, surveys of historic architecture and artworks, nondestructive testing of dielectric aerospace materials, security applications, paleontology, detection of wood-boring insect damage, and others. Each application is illustrated with relevant data acquired in laboratory and/or field experiments.

Jalapeño peppers (Capsicum annuum L.) are an important agricultural product worldwide. Despite its high demand in recent years, there are few studies on its production under adverse conditions caused by environmental phenomena. Crops in protected environments such as aeroponics offer greater control of these phenomena and enable efficient use of resources. However, it is necessary to validate the cultivation technique for which new technologies are being used. One of these is the analysis of images captured in the visible and near and far infrared spectrum which involves using non-invasive techniques in order to characterize the growth of a plant and diagnose if it presents any type of stress. This study presents the characterization of vegetative growth and fruiting of jalapeño pepper plants in an aeroponic system, where the root, leaf development parameters and fruits were measured in four jalapeño pepper crops through images of plants captured in the visible (VIS), near infrared (NIR) and far infrared (IR) spectrums. Four crops of thirty jalapeño pepper plants were sown to obtain a total of one hundred and twenty plants which were characterized in the different phases of growth and fruiting. Each of the four jalapeño pepper crops were monitored for sixty days in an aeroponic system in a greenhouse. The first crop was intended to carry out tests to establish the appropriate fertigation times, the next three crops were grown under favorable conditions. Algorithms were developed in Matlab to obtain, over ten image capture sessions, the morphometric and thermal parameters of the roots (perimeter, area, length and average temperature), plants (perimeter, area, height and average temperature), and fruiting. (yield and number of fruits). The statistical analysis was carried out using the ANOVA and Tukey tests considering a value of p ≤ 0.05. The results obtained indicate that there is no significant difference between the characterizations of the four crops. This statement is also supported by the visual analysis of the growth curves parameters of the four crops. In addition, the temperature inside the aeroponic system was contrasted with the ambient temperature and it was verified that the temperature to which the roots are exposed was in the range of 10°C – 20°C. The thermal analysis determined that a plant that presents water stress and is also exposed to high temperatures has an average leaf temperature of 3.7 to 5 °C above the optimal condition for the plant, while a plant with stress at normal temperatures was 1.3 °C higher than the plant without stress.

In this paper, we present a three-step sixth-order iterative schemes to estimate the solutions of a nonlinear systems of equations, for predicting the shear strength of a reinforced concrete beam. This procedure is designed by means of a weight function technique. The values for the parameters of this system were randomly selected inside the prescribed ranges by technical standards for structural concrete; moreover, some of this parameters were fixed taking into consideration the solvability region of the adopted steel constitutive model. The efficiency of the new class is compared with other current schemes, with very good results.

This study examines the potential of implementing a systematic approach to piloting desalination plants, with the objective of evaluating energy improvements in water desalination processes. The global scarcity of freshwater resources has significantly influenced the development of desalination technologies, with reverse osmosis emerging as one of the most prevalent and highly regarded methods. Pilot tests with the latest generation of reverse osmosis membranes in large desalination plants are becoming increasingly common. This is due to the fact that small-scale experiments are being carried out on the operation of new generation membranes with better salt rejection and lower energy consumption. The objective of this approach is to achieve the optimal water quality standard at the lowest possible cost. In this manner, pilot tests are being conducted prior to the determination of whether to alter the reverse osmosis membranes, as this represents a substantial investment. The objective of these tests is to minimise the risk of making an erroneous decision and to ensure optimal results in terms of energy consumption, operating costs and reduction of environmental impact, while complying with the requisite water quality standards. In this case, the Pareto analysis is employed to identify the two or three most significant causes whose treatment affects more than 80% of the potential energy savings to be implemented. This article introduces a novel approach to studying a total of 180 desalination plants at the territorial level in the Canaries.

The process of oxygenic photosynthesis is primarily driven by two multiprotein complexes known as photosystem II (PSII) and photosystem I (PSI). PSII facilitates the light–induced reactions of water–splitting and plastoquinone reduction, while PSI functions as the light–driven plastocyanin-ferredoxin oxidoreductase. In contrast to the highly conserved structure of PSII among all oxygen–evolving photosynthetic organisms, the structures of PSI exhibit remarkable variations, especially for photosynthetic organisms that grow in special environments. In this review, we make a concise overview of the recent investigations of PSI from photosynthetic microorganisms including prokaryotic cyanobacteria and eukaryotic algae from the perspective of structural biology. All known PSI complexes contain a highly conserved heterodimeric core; however, their pigment compositions and peripheral light-harvesting proteins are substantially flexible. This structural plasticity of PSI reveals the dynamic adaptation to environmental changes for photosynthetic organisms.

Background Homologous recombination deficiency (HRD) evolved into a major diagnostic marker in high grade ovarian cancer (HGOC) predicting the response to poly (Adenosine diphosphate-ribose) polymerase inhibitors (PARPi) and also platinum-based therapy. In addition to HRD, the type of peritoneal tumor spread influences treatment response and patient survival; miliary type tumor spread has poorer predicted outcome than non-miliary type tumor spread. Methods Known methods for HRD assessment were adapted for our technical requirements and the Predictive-value Integrated Genomic Instability Score (PIGIS) for HRD assessment evolved as an outcome. PIGIS was validated in HGOC samples from 122 patients. We used PIGIS to analyze whether the type of tumor spread correlated with HRD status and whether this had an impact on survival. Results We demonstrated that PIGIS can discriminate HRD positive from HRD negative samples. Tumors with miliary tumor spread are HRD negative and have a very bad prognosis with a progression free survival (PFS) of 15.6 months and an overall survival (OS) of 3.9 years. However, HRD negative non-miliary spreading tumors in our cohort had a much better prognosis (PFS 35.4 months, OS 8.9 years), similar to HRD positive tumors (PFS 34.7 months, OS 8.9 years). Conclusions Our results indicate that in a predominantly PARPi naïve cohort the type of tumor spread might be a better predictor of response to platinum sensitivity than HRD. It remains to be determined, whether this also applies for sensitivity to PARPi.

Deep learning machines are computational models composed of multiple processing layers of adaptive weights to learn representations of data with multiple levels of abstraction. Their structure is mainly reflecting the intuitive plausibility of decomposing a problem into multiple levels of computation and representation since it is believed that higher layers of representation allow a system to learn complex functions. Surprisingly, after decades of research, from learning and design perspectives these models are still deployed in a heuristic manner. In this paper, deep learning feed-forward machines are modeled from a statistical mechanics point of view as disordered physical systems where its macroscopic behavior is determined in terms of the interactions defined between the basic constituent of these models, namely, the artificial neuron. They are viewed as the equilibrium states of a theoretical body that is subject to the law of increase of the entropy. The study of the changes in energy of the body when passing from one equilibrium state to another is used to understand the structure and role of the phase space of the system, the stability of the equilibrium states, and the resulting degree of disorder. It is shown that the topology of these models is strongly linked to their stability and resulting level of disorder. Furthermore, the proposed theoretical characterization permit to assess the thermodynamic efficiency with which information can be processed by these models, and to provide a practical methodology to quantitatively estimate and compare their expected learning and generalization capabilities. These theoretical results provides new insights to the theory of deep learning and their implications are shown to be consistent through a set of benchmarks designed to experimentally assess their validity.

Naturally occurring small molecules include a large variety of natural products from different sources that have confirmed activity against epigenetic targets. In this work we review chemoinformatic, molecular modeling and other computational approaches that have been used to uncover natural products as inhibitors of DNA metiltransferases, a major family of epigenetic targets with significant potential for the treatment of cancer and several other diseases. Examples of these computational approaches include docking, similarity-based virtual screening, and pharmacophore modeling. It is also commented the chemoinformatic-based exploration of the chemical space of naturally occurring compounds as epigenetic modulators which may have significant implications in epigenetic drug discovery and nutriepigenetics.

Design process can be divided into stages of analysis and synthesis. This paper presents the application of the object-oriented technique to the analysis as well as theoretical considerations concerning to design of gear size ranges. This analysis consists in decomposition of the designed artefact (a gear) according to the rule “from general to details view”. The basics of the object-oriented analysis were formulated. Furthermore, design phases and the objects related to theses phases were discussed. The following models have been considered: hierarchical model, entity-relationship model, data-flow model and object model. Analysis is additionally connected with interactions between particular design phases.

The broad emission bump in the electromagnetic spectra observed following the detection of gravitational waves created during the kilonova event of merger of two neutron stars in August 2017, GW170817, has been linked to the heavy elements of lanthanides (Z=57-71), and a new understanding of creation of heavy elements in the r-process. The initial spectral emission bump has a wavelength range of 3000 - 7000 \AA, thus covering the region of ultraviolet (UV) to optical (O) wavelengths, and is similar to those seen for lanthanides. Most lanthanides have large number of closely lying energy levels which introduce extensive sets of radiative transitions which often form broad region of lines of significant strength. The current study explores these broad features through photoabsorption spectroscopy of 25 lanthanides ions, Ho I-III, Er I-IV, Tm I-V, Yb I-VI and Lu I-VII. With excitations only to a few orbitals up beyond the ground configurations, we find most of these ions cover large number of bound levels with open $4f$ orbital and produce tens to about hundred thousands lines that may form one or multiple broad features in X-ray to UV, O, and infrared (IR) regions. Spectrum of each of 25 ions is presented indicating presence, shape and wavelength region of the features. Accuracy of atomic data to interpret the merger spectra has been a outstanding problem. The present study aims at providing improved atomic data for energies and transition parameters obtained using relativistic Breit-Pauli approximation implemented in the atomic structure code SUPERSTRUCTURE. The present data have been benchmarked with available experimental data for energies and transition parameters. The study finds that number of ions under the present study are possible contributors of the emission bump of GW170817. All atomic data will be made available online at NORAD-Atomic-Data database.

Groove pancreatitis represents a chronic focal form of pancreatitis affecting the zone between the pancreatic head and the duodenal „C” loop, known as the groove area. This is a rare condition that affects the pancreatic periampullary part, including the duodenum and the common bile duct, associated usually with long-term alcohol and tobacco misuse and being more frequent in men than in women. The most common clinical symptoms of groove pancreatitis include weight loss, acute abdominal pain, nausea, and jaundice. This report is about a 66 year old woman with a history of heavy smoking, presenting with weight loss, nausea, and upper abdominal pain. Contrast enhanced computed tomography revealed the existence of a chronic pancreatitis as well as the dilatation of the main pancreatic duct, a cyst of the pancreatic head and enlargement of the biliary tract. Conservatory treatment was initiated but with no improvement of symptoms. Since there was no indication for endoscopic retrograde cholangiopancreatography, we decided to perform a pancreatoduodenectomy, as surgery appears to be the single effective treatment.

The high sensitivity of chiroptical responses to conformational changes and supramolecular interactions has prompted an increasing interest in the development of chiroptical applications. However, prediction and understanding the chiroptical responses of the necessary large systems may not be affordable for calculations at high levels of theory. In order to facilitate the development of chiroptical applications, methodologies capable of evaluating the chiroptical responses of large systems are necessary. Exciton chirality method has been extensively used for the interaction between two independent chromophores through the Davydov model. For systems presenting C2 or D2 symmetry one can get to the same results by applying the selection rules. In the present article, analysis of the selection rules for systems with symmetries Cn and Dn with n = 3 and 4 is used to uncover the origin of their chiroptical responses. We hope that the use of the chiroptical symmetry analysis (CSA) for systems presenting the symmetries explored herein as well as for systems presenting higher symmetries will serve as a useful tool for the development of chiroptical applications.

Background: Endovascular treatment of popliteal aneurysms (PA) has increased in the last few years, quickly becoming the main treatment in many vascular centers, based on the acceptable and promising outcomes reported in the literature. However, endograft infections are the most dangerous complication as a serious local compromise and usually require open surgical conversion and device explantation to preserve the affected extremity. Case report: We reported two patients admitted to the emergency room for pain and edema in the lower leg. Both patients have undergone exclusion of ruptured PA a few years before by endovascular graft. CTA showed a significant volume of fluid-corpuscular collection related to perianeurysmal abscess collection in both cases. Blood cultures and drained material cultures were positive for Staphylococcus Capitis in the first case and S. Aureus in the second. The antibiotics prophylaxis was performed for 10 days, then, patients underwent an open surgical conversion with a complete explantation of endovascular material and a femoro-popliteal bypass using an autologous vein in the first case and biological bovine pericardium prosthesis in the other case. Furthermore, we have questioned the literature and found eight more cases described in case report article referred to popliteal graft infections by different microorganisms, mostly presenting acute limb ischemia as the first symptom and suggesting endograft explantation with open conversion and autologous vein bypass as the commonest therapeutic choice. Conclusions: Open surgical conversion of popliteal endograft infection is the best strategy to manage peripheral infection of the popliteal stent.

The article presents several innovative systems developed through student laboratory projects, including two autonomous vehicles, a four-legged walking robot, an active ankle-foot orthosis, a ball on beam balancing mechanism, a ball on plate system, and a manipulator arm—all powered by pneumatic artificial muscles (PAMs). Fluidic muscles offer significant potential in various mechatronic systems, robots, and manipulators due to their flexible, lightweight nature and compliance. Their ability to produce smooth and adaptable motions is particularly beneficial in applications requiring natural and human-like movement, such as rehabilitation and assistive devices. Although PAMs powered control systems face challenges with nonlinear phenomena, their biologically inspired design holds promise for future applications across various industries. These may include innovative applicability in industrial, automotive, and aerospace sectors, as well as use in sports, medical aids, entertainment, and animatronics. Incorporating self-made laboratory systems actuated by PAMs into control systems education offers a comprehensive learning opportunity that combines theoretical concepts with hands-on experience. This approach develops the necessary skills of future engineers, expanding their understanding of technical principles and preparing them for future challenges in engineering practice.

In 2020, the Covid-19 outbreak led many countries across the globe to introduce lockdowns (LDs) that effectively caused most anthropic activities to either stop completely or be significantly reduced. In Europe, Italy played a pioneeristic role via the early introduction of a strict nationwide LD on March 9^th. This study is aimed at evaluating, using both chemical and meteorological data, the environmental response to that occurrence as observed by the Lamezia Terme (LMT) GAW/WMO station in Calabria, Southern Italy. The first 2020 lockdown has therefore been used as a “proving ground” to assess CO, CO₂, CH₄, BC, and NO_x concentrations in a rather unique context by exploiting the location of LMT in the context of the Mediterranean Basin. In fact, its location on the Tyrrhenian coast of Calabria and local wind circulation both lead to daily cycles where western-seaside winds depleted in anthropogenic pollutants can be easily differentiated from northeastern-continental winds, enriched in anthropogenic outputs. In addition to that, the first Italian LD occurred during the seasonal transition from Winter to Spring and, consequently, Summer, thus providing new insights on emission outputs correlated with seasons. Findings have clearly indicated BC and, in particular, CO as strongly correlated with average daily temperatures, and possibly domestic heating. CO₂’s reduction during the lockdown and consequent increase in the post-lockdown period, combined with wind data, has allowed to constrain local source of emissions located northeast from LMT. NO_x reductions during specific circumstances are consistent with hypotheses from previous research which linked them to rush hour traffic and other forms of transportation emissions. CH₄’s stable patterns are consistent with livestock, landfills, and other sources assumed to be nearly constant during LD periods.

This research aims to apply Artificial Intelligence (AI) methods, specifically Artificial Immune Systems (AIS), to design an optimal control strategy for a multivariable control plant. Two specific industrial control approaches are investigated: I-PD (Integral-Proportional Derivative) and PI-D (Proportional-Integral Derivative) control. The motivation for using these variations of PID controllers is that they are functionally implemented in modern industrial controllers, where they provide precise process control. The research results in a novel solution to the control synthesis problem for the industrial system. In particular, the research deals with the synthesis of I-P control for a two-loop system in the technological process of a distillation column. This synthesis is carried out using the AIS algorithm, which is the first application of this technique in this specific context. Methodological approaches are proposed to improve the performance of industrial multivariable control systems by effectively using optimization algorithms and establishing modified quality criteria. The numerical performance index ISE justifies the effectiveness of the AIS-based controllers in comparison with conventional PID controllers (ISE₁ = 1.865, ISE₂ = 1.56). The problem of synthesis of the multi-input multi-output (MIMO) control system is solved, considering the interconnections due to the decoupling procedure.

This review article is focused on the analysis of the state of the art of sensors for guided 9 ultrasonic waves for the detection and localization of impacts, therefore of interest for the structural 10 health monitoring (SHM). The recent developments in sensor technologies are then reported and 11 discussed through the many references in recent scientific literature. The physical phenomena re-12 lated to impact event and the main physical quantities are then introduced to discuss their im-13 portance in the development of the hardware and software components for SHM systems. An im-14 portant aspect of the article is the description of the different ultrasonic sensor technologies cur-15 rently present in the literature and what advantages and disadvantages they could bring, in relation 16 to the various phenomena investigated. In this context, the analysis of the front-end electronics is 17 deepened, the type of data transmission both in terms of wired and wireless technology and in terms 18 of online and offline signal processing. The integration aspects of sensors for the creation of net-19 works with autonomous nodes with the possibility of powering through energy harvesting devices 20 and the embedded processing capacity is also studied. Finally, the emerging sector of processing 21 techniques using deep learning and artificial intelligence concludes the review by indicating the 22 potential for the detection and autonomous characterization of the impacts.

High hopes were associated with the new anti-angiogenic medicament, bevacizumab, which due to the possibility of binding to isoform A of vascular endothelial growth factor (VEGF), inhibited the creation of new blood vessels. However, not only blood vessels are responsible for the tumor cells' spread. During the process of tumor growth, lymphangiogenesis is mediated by other isoforms of the VEGF family, specifically VEGF-C and VEGF-D, which are independent of the bevacizumab action. Therefore, based on the mechanism of bevacizumab action and the processes of angio- and lymphangiogenesis, we formed three hypotheses: 1) if the lymph nodes in the primary ovarian cancers are metastatic, the outcome of bevacizumab treatment is worsened; 2) concerning the second-line treatment, bevacizumab will act in a weakened manner if the recurrence occurs in lymph nodes compared to local recurrences; 3) patients treated by bevacizumab are more likely to have recurrences in lymph nodes. These hypotheses raise the issue of the existing gap of knowledge, which concerns the effect of bevacizumab on the metastatic lymph nodes.

This study presents the development of a diglycidyl monomer containing two imine groups that can act as dynamic and reversible bonds. During the curing of the monomer with two different amine hardeners, we confirmed the formation of new imine groups due to the transamination reaction, not reported before, between the imine groups of the diepoxy monomer with the amine groups of the hardener. The effect of this structural change is observed for the first time in the stress relaxation behavior, resulting in the overlapping of two different relaxation modes. The analytical modelling could extract two distinct characteristic relaxation times using a double-element Maxwell model. A second characterization of the stress relaxation process by frequency sweep experiments was performed to corroborate the results obtained, confirming speedy stress relaxation. Acid-catalyzed hydrolysis was performed on the studied materials, demonstrating the complete degradation of the network. We finally confirmed that the synthesized diepoxy compound is suitable for preparing carbon fiber-reinforced composite materials, demonstrating easy fiber impregnation, fast reshaping and especially a total degradation of the polymer matrix that allows the recovery of the carbon fibers in mild conditions. This epoxy-amine system is an excellent candidate for overcoming the traditional limits of thermosets in preparing fiber-reinforced composites.

The serendipitous discovery of antiparasitic drugs, such as quinine and artemisinin from plant origin reveals that the search for new chemical pharmacophores from medicinal plants is valuable. The present study sought to explore the antiplasmodial, antileishmanial, and antitrypanosomal activities of extracts from Lippia adoensis. Crude extracts of L. adoensis leaves and twigs, which were obtained by extraction using 70% ethanol in water, were assayed for antiplasmodial activity against P. falciparum 3D7 and Dd2 through the SYBR green I-based fluorescence assay; and for antileishmanial, antitrypanosomal, and cytotoxic effects on Leishmania donovani, Trypanosoma brucei brucei, and Vero cells, respectively, using the resazurin colorimetric assays. The phytochemical analysis of the extracts was performed using a liquid chromatography-mass spectrometry (LC-MS) feature-based detection and molecular networking flow on Global Natural Product Social (GNPS). As a result, the crude extracts from L. adoensis inhibited growth of P. falciparum (3D7 and Dd2) (IC50s; (3D7): 10.008 and 97.467 μg/mL; (Dd2): 29.48 and 26.96 μg/mL), L. Donovani (IC50s: 22.879-10.522 μg/mL), and T. brucei brucei (IC50s: 2.3085-55.06 μg/mL). The extracts were found to be non-cytotoxic to Vero cells, thus yielding median cytotoxic concentrations (CC50s) above 100 μg/mL. The LC-MS tandem molecular networking flow predicted that the extracts contain valsafungin A and bacillamidin on the first cluster, and fatty acids, ketone and aldehyde derivatives on the second cluster. Overall, the present study demonstrated the antiparasitic effects of L. adoensis extracts, thus justifying the use of this plant in the traditional treatment of fever and malaria conditions. Nevertheless, detailed metabolomic studies and antiparasitic mechanisms of action of the extracts are expected to unveil the potential antiparasitic hit compounds.

Due to its high short-term global warming potential (GWP) compared to carbon dioxide, methane (CH₄) is a considerable agent of climate change. This research is aimed at analyzing data on methane gathered at the GAW (Global Atmosphere Watch) station of Lamezia Terme (Calabria, Southern Italy) spanning seven years of continuous measurements (2016-2022) and integrating the results with key meteorological data. Compared to previous studies on detected methane mole fractions at the same station, daily-to-yearly patterns have become more prominent thanks to the analysis of a much larger data set. Overall, the yearly increase of methane at the Lamezia Terme station is in general agreement with global measurements by NOAA, though local peaks are present, and an increase linked to Covid-19 is identified. Seasonal changes and trends have proved to be fully cyclic, with the daily cycles being largely driven by local wind circulation patterns and synoptic features. Outbreak events have been statistically evaluated depending on their weekday of occurrence to test possible correlations with anthropic activities. A cross analysis between methane peaks and specific wind directions has also proved that local sources may be deemed responsible for the highest mole fractions.

This study delves into the foundational aspects of electrocardiographic (ECG) lead systems, specifically focusing on Einthoven’s Triangle and Wilson’s Central Terminal. We introduce the innovative concept of a Precordial Central Terminal, a strategic arrangement of thoracic electrodes that establishes two Einthoven’s triangles within the horizontal plane, in accordance with physical-mathematical principles. Furthermore, we meticulously scrutinize Goldberger’s contributions to the field of ECG, particularly augmented leads, which shed light on the development of our theory. Additionally, we propose the implementation of a novel standardized electrocardiograph, characterized by its use of exclusively “precordial” electrodes, yet capable of providing a comprehensive three-dimensional perspective of cardiac electrical activity. By amalgamating theoretical underpinnings with empirical experimentation, our study lays the groundwork for future investigations, including the experimental validation of our innovative Precordial Terminal. This validation holds the promise of yielding substantial advancements in the realm of clinical electrocardiography.

The flowability of a powder is a characteristic dependent on both the particle ensemble's physical properties as well as the testing equipment and conditions. In powder bed additive manufacturing processes (SLM, EBM), flowability can be used to predict the quality of the deposited powder layer. However, how representative flowability is for the powder bed layer quality is not always clear.In this work, we compared several steel powders, as well as different testing methods. Each powder had an individual combination of composition or particle size distribution. Furthermore, the flowability testing equipment and methods were selected according to standards (Tap density, Hall flow) or referring to the published literature (angle of repose, FT4 Powder Rheometer). After measuring the flowability of different samples for each testing method, we created a database to evaluate a first correlation between the different testing methods. Finally, with a Powder Rheometer, we investigated for one sample some flow properties as function of different particle size distributions.

The key towards a sustainable future is the reduction of mankind’s impact on natural systems via the development of new technologies and the improvement of source apportionment. Though days, years and seasons are arbitrarily set, their mechanisms are based on natural cycles driven by Earth’s orbital periods. This is not the case for weeks, which are a pure anthropic category and are known from literature to influence emission cycles. For the first time since it started data gathering operations, CO (carbon monoxide), CO₂ (carbon dioxide), CH₄ (methane) and eBC (equivalent black carbon) values detected by the Lamezia Terme WMO/GAW station in Calabria, Southern Italy have been evaluated via a two-pronged approach accounting for weekly variations in absolute concentrations, as well as the number of hourly averages exceeding select thresholds. The analyses were performed on seven continuous years of measurements, from 2016 to 2022. Moreso, the two results have been combined into a new parameter: the hereby defined WDWO (Weighed Distribution of Weekly Outbreaks) normalizes weekly trends of CO, CO₂, CH₄ and eBC on an absolute scale as percentages, with the scope of providing regulators and researchers alike with a new tool meant to better evaluate anthropogenic pollution and mitigate its effects.

Diarrhea remains one of the leading causes of mortality worldwide, especially among children. Recent epidemiological studies conducted in developing countries identified Shigella species as the most predominant pathogenic bacteria responsible for diarrhea. Antimicrobial therapy is necessary for Shigella infections; however, the rapid emergence of resistance against existing antimicrobials in Shigella spp. poses a serious global health problem. To identify alternative antimicrobial compounds with activity against Shigella species, the pathogens responsible for bacterial diarrhea. In this study, we have applied antibacterial phenotypic screening to identify potent anti-Shigella compounds across a broad chemical diversity, including selected acetaminophen derivatives containing benzothiazoles backbone, and their combination with certain antibiotics. In continuation to our effort in searching potent antimicrobial compounds, we have found this time around that two acetaminophen derivatives containing benzothiazoles backbone (4a and 4b) could inhibit the growth of Shigella flexneri with common MIC value of 12.5 µg/ml. These compounds were established through a time-kill kinetics’ study to be bactericidal. Meanwhile, the 2-aminobenzothiazoles (1a and 1b) used for the synthesis of compounds 4 (a & b) were found to be poorly active (MIC: 100 µg/ml) against this pathogen. Combination studies of 4a and 4b with the least susceptible antibiotics (ceftriaxone and cotrimoxazole) demonstrated synergistic anti-Shigella activity. The present study demonstrates that the azobenzothiazole dyes 4 (a & b) can be repurposed as potential anti-Shigella compounds, which can serve as scaffolds for the development of new agents against infectious diarrhea caused by Shigella and other enteric pathogens, especially in developing countries.

Nocardia is an emerging bacterial disease that often affects patients with compromised immune systems. As survival increases, more and more patients are receiving solid organ transplantations, and more patients are cancer survivors and receiving long-term immune system modifying agents or corticotherapy and immunosuppressive agents, organisms that are not harmful in usual circumstances become a public health problem. Carbapenems are usually a second-line therapy in the setting of Nocardia infections. We present the case of a patient who had an immunocompromised status and was diagnosed with Nocardia farcinica, which showed in vitro resistance to carbapenems. The symptoms were non-specific and had a common presentation, although the infection was disseminated and had severe CNS and ocular involvement. The clinical course was more severe when the carbapenem was withdrawn based on the provided antibiogram and markedly improved when clinical judgment considered it might be beneficial. The first case in our region to describe an „in vitro” carbapenem-resistant Nocardia species, that responded „in vivo” differently and we believe it is important to remind clinicians of this potentially severe disease in difficult cases.

Family doctors can have an active role in identifying significant population needs and solutions. During COVID-19 epidemic, patient home monitoring with pulse oximetry has been a key aspect of care of patients. However, pandemics bring shortage medical equipment such as pulse oximetry. Through the local maker community in a matter of days four “smart” pulsoximeters were created and built. Following Internet of Things principles, the pulsoximeters were programmed to transmit recorded data through Wi-Fi, in real time, directly to the doctors. Each protype pulsoximeter served a family doctor during the pandemic. Building instructions were shared in maker-oriented websites, potentially leading to additional small-scale productions.

The study of the impact of polyQ expansion driven proteotoxicity on cell metabolism has evi-denced NAD molecule as a central player in regulating metabolic response and cell repair in neurodegeneration. The decline in NAD intracellular levels represents a hallmark of ageing aris-ing from a dysregulation between NAD-consuming and biosynthetic enzymatic reactions in which NMNAT plays a key role. By an integrated bioanalytical and proteomic experimental design, the derangement of NAD metabolism deriving from the accumulation of polyQ-Htt protein has been analysed in Saccha-romices cerevisiae harbouring a 103Q-Htt and compared with wild-type Htt, in absence and in presence of a phenolic extract from EVOO, as a source of antioxidant bioactive compounds. Quantification of NAD and its precursors and proteomic analysis of the differential protein ex-pression has been performed by LC-DAD-MS. Chronological lifespan and NAD homeostasis was strongly impaired by proteotoxic polyQ-Htt, eliciting a depletion of NAD levels and accumulation of NaMN. In parallel a downregulation of Sirt2 expression levels has been observed. Phenolic extract administration had no meaningful ef-fects on NAD replenishment to prevent proteotoxicity. NaMN can represent a biomarker of accel-erated aging, and/or a signaling molecule for cell repair.

Continuous casting is the most common method for producing steel into semi-finished shapes like billets or slabs. Throughout this process, steel experiences mechanical and thermal stresses, which influence its mechanical properties. During continuous casting, decreased formability in steel components leads to crack formation and failure. One reason for this phenomenon is the appearance of the soft ferrite phase during cooling. However, it is unclear under which conditions this ferrite is detrimental to the formability. In the present research, we investigated what microstructural changes decrease the formability of microalloyed steels during continuous casting. We studied the hot compression behaviour of microalloyed steel over temperatures ranging from 650 °C to 1100 °C and strain rates of 0.1 s-1 to 0.001 s-1 using a Gleeble 3800® device. We examined microstructural changes at various deformation conditions using microscopy. Furthermore, we implemented a physically-based model to describe the deformation of austenite and ferrite. The model describes the work hardening and dynamic restoration mechanisms, i.e., discontinuous dynamic recrystallisation (dDRX) in austenite and dynamic recovery (DRV) in ferrite and austenite. The model considers the stress, strain, and strain rate distribution between phases by describing the dynamic phase transformation during the deformation in iso-work conditions. Increasing the strain rate below the transformation temperature improves hot ductility by reducing DRV and strain concentration in ferrite. Due to limited grain boundary sliding, the hot ductility improves at lower temperatures (<750 °C). In the single-phase domain, DRX improves the hot ductility provided that fracture occurs at strains in which DRX advances. However, at very low strain rates, the ductility decreases due to prolonged time for grain boundary sliding and crack propagation.

Subglottal Impedance-Based Inverse Filtering (IBIF) allows for the continuous, non-invasive estimation of glottal airflow from a surface accelerometer placed over the anterior neck skin below the larynx, which has been shown to be advantageous for the ambulatory monitoring of vocal function. However, during long-term ambulatory recordings over several days, conditions may drift from the laboratory environment where the IBIF parameters were initially estimated due to sensor positioning, skin attachment, and temperature, among other factors. Observation uncertainties and model mismatch may result in significant deviations in the glottal airflow estimates, but are very difficult to quantify in ambulatory conditions due to a lack of a reference signal. To address this issue, we propose a Kalman filter implementation of the IBIF filter, which allows for both estimating the model uncertainty and adapting the airflow estimates to correct for signal deviations. One-way ANOVA results from laboratory experiments using the Rainbow Passage indicate a an improvement on amplitude-based measures for PVH subjects compared to IBIF which shows a statistically difference with respect to the reference oral airflow (p=0.02,F=4.1). MFDR from PVH subjects is slightly different to the oral airflow when compared to IBIF (p=0.04, F=3.3). Other measures did not have significant differences with either Kalman or IBIF, with the exception of H1H2, whose performance deteriorates for both methods. Overall, both methods show similar flottal airflow measures, with the advantage of Kalman by improving amplitude estimation. Moreover, Kalman filter deviations from the IBIF output airflow might suggest a better representation of some fine details in the ground-truth glottal airflow signal. Other applications may take more advantage from the adaptation offered by the Kalman filter implementation.

Background/aims: Prior research identified a significant association between heart disease and metabolic dysfunction-associated liver steatohepatitis (MASLD), but the mechanisms are unclear. This study aims to search predictive biomarkers for grade I left ventricular diastolic dysfunction (LVDD), an early stage of heart failure (HF), in type 2 diabetes mellitus (T2DM) patients. Methods: This single-center, prospective observational study screened 73 T2DM patients for grade 1 LVDD and MASLD using 2D echocardiography, tissue analysis, spectral color Doppler, and Fibromax. Results: The study analyzed 50 patients (mean age 58±11.3 years) with a median diabetes duration of 7 years, abdominal obesity (mean BMI 34.4±5.9 kg/m2), and a mean HbA1c of 7.9±1.5%. The prevalence of grade I LVDD, fibrosis, mild steatosis, moderate to severe liver steatosis, mild MASLD, and moderate MASLD was 54%, 44%, 14%, 80%, 43%, and 34%, respectively. Regression analysis revealed that grade 1 LVDD was positively associated with age, Fibrotest, ɑ2-macroglobulin, epicardiac adipose tissue (EAT), and negatively associated with lateral s`, E wave, E/e`, E/A, medium E`, and septal e` (p< 0.05 for all). ɑ2-macroglobulin > 1.92 g/L (AUROC= 0.782, sensitivity 70.4%, specificity 81.2%) and fibrotest score > 0.11 (AUROC 0.766, sensitivity 92.6%, specificity 56.2%) were significant predictors of grade I LVDD. Conclusion: HF is a multifaceted disorder associated with multisystem organ damage, including nonalcoholic MASLD. Although the underlying mechanisms remain unclear, innovative non-invasive biomarkers, such as ɑ2-macroglobulin or fibrotest, could concurrently indicate liver stiffness and the likelihood of grade I LVDD, an early, asymptomatic HF stage in T2DM patients.

We present a numerical study in which large-scale bulk simulations of self-assembled DNA constructs have been carried out with a realistic coarse-grained model. The investigation aims at obtaining a precise, albeit numerically demanding, estimate of the free energy for such systems. We then, in turn, use these accurate results to validate a recently proposed theoretical approach that builds on a liquid-state theory, the Wertheim theory, to compute the phase diagram of all-DNA fluids. This hybrid theoretical/numerical approach, based on the lowest order virial expansion and a nearest-neighbor DNA model, can provide, in an undemanding way, a thermodynamic description of DNA associating fluids that is in semi-quantitative agreement with experiments. We show that the predictions of such scheme are as accurate as the ones obtained with more sophisticated methods. We also demonstrate the flexibility of the approach by incorporating non-trivial additional contributions that go beyond the nearest-neighbor model to compute the DNA hybridization free energy.

PET imaging of bacterial infection could potentially provide added benefit for patient care by non-invasive means. [68Ga]Ga-desferrioxamine B – a radiolabelled siderophore – shows specific uptake by human-pathogenic bacteria like Staphylococcus aureus or Pseudomonas aeruginosa as well as sufficient serum stability for clinical application. Here, we provide data for automated production of [68Ga]Ga-desferrioxamine B on two different cassette based synthesis modules (Modular-Lab PharmTracer and GRP 3V) using commercially available cassettes together with an approved 68Ge/68Ga radionuclide generator. Quality control including determination of radiochemical purity as well as a system suitability test was set up via RP-HPLC on a C18 column. The two described production processes, using an acetic acid/acetate buffer system with ascorbic acid as a radiation scavenger for radiolabelling, yield ready-to-use formulations with sufficient activity yield. Batch data showed radiochemical purity of >95 % as determined by RP-HPLC and ITLC as well as excellent stability over 2 hours post production. Specifications for routine production were set up and validated with four master batches for each synthesis module. Based on this study, an academic clinical trial for imaging of bacterial infection was initiated. Both described synthesis methods enable reproducible, automated in-house production of [68Ga]Ga-desferrioxamine B for clinical application.

The early detection of small cracks in large structures is a crucial requirement for the implementation of structural health monitoring (SHM) system with a low transducer density. This work presents the results of the analysis of scattering of a submillimeter notch type defect with semielliptical shape with a groove at constant width 100µm in a 4.1mm thick aluminum plate. The defect is investigated with an ultrasonic guided wave (UGW) A0 mode at 550 kHz to cover long range in a thick plate. The mode selection is obtained by interdigital transducers designed to operate with 5mm central wavelength. The novel contribution is the assessment of the scattering amplitudes at different orientations of the defect when the distance is large as 35 cm in pulse-echo mode or 70 cm in pitch-catch mode. The system model is based on Finite Element Model (FEM) simulations and the results are in good agreement with experimental tests. The detection of the defect is obtained by comparing the scattered signals from the defect with base line signals of the pristine laminate. The analysis of scattering features and the efficient excitation with a probing UGW show the potential implementation in real structural health monitoring (SHM) systems.

Oxidative stress plays an essential role in the pathological processes that trigger various chronic liver diseases and contributes to the development of hepatocarcinogenesis. Antioxidants from natural sources trap free radicals by converting them into non-harmful products and minimize oxidative stress, playing a crucial function in the treatment of free radical-induced diseases. However, the activity of these antioxidants is limited due their poor bioavailability, which is why various nano-drug delivery systems have been developed to improve their stability, promote smooth release, and targeted delivery for liver cancer treatment. Specifically, this review aims to report recent scientific findings of novel nano-formulations containing natural antioxidant molecules targeted for the treatment of liver cancer.

This compendium presents new mathematical techniques for modeling Point Absorbers. A combined frequency-time domain framework is developed. It is used to simulate the energy generated by the wave farms. With Matlab and Fortran as a base, this leads to obtain physical variables of primary importance, namely position, velocity and power to energy net balance relationships of absorption. Integration of different degrees of freedom with heave as main executable leads in turn to a single buoy motion focus. Acquisition of the needed hydrodynamic coefficients is provided through application of potential field solvers with Boundary Element Methodology background. Initially, this Wave-to-motion model is validated by comparison with previous experimental results for a floating cone cylinder shape (Buldra-FO3). A single, generic, vertical floating cylinder is contemplated then, that responds to the action of the passing regular waves excitation. Later, two equally sized vertical floating cylinders aligned with the incident wave direction are modeled for a variable distance between the bodies. For both unidirectional regular and irregular waves as an input in deep water, we approximate the convolutive radiation force function term through the Prony method. By changing the spatial disposition of the axisymmetric buoys, using for instance triangular or rectangular shaped arrays of three and four bodies respectively, the study delves into motion characteristics for regular waves. The results highlight efficient layouts for maximizing the energy production whilst providing important insights into their performance, revealing displacement amplification- and capture width-ratios, while deriving in possible interpretations of scenarios related to the known park effect. These terms are encompassed by the novelty of a new conceptual Post-Processing methodology in the field, which leads to obtain an optimal distance for the separated bodies with effective energy absorption in a regular wave regime. The main objective is to generate a tendency within the hydrodynamic field of study, which is the Wave to motion perspective. More generally, this computational excursion envisions and depicts potential fields of study, which will surely enhance new connections and link this renewable energy form. Therefore, this research delves first into the historical and technical background on Ocean Wave Energy. Next, it is in the section regarding Materials and Methods, where boundaries and related equations are introduced step by step, together with latter mentioned case scenarios, and their corresponding configuration parameters. A separate section frames then the scope of results, while finally, there is an ensuing discussion and conclusions for evaluation assessment.

This thesis completion works it out to deepen into diverse modeling techniques for Point Absorbers. A combined frequency-time domain model is conceived, designed and developed in Matlab with Fortran as a base, leading to obtain physical variables of primary importance, namely position, velocity and power to energy net balance relationships of absorption. Integration of different degrees of freedom with heave as main executable leads in turn to a single buoy motion focus. Acquisition of the needed hydrodynamic coefficients is provided through application of NEMOH \& BEMIO solvers due to the Boundary Element Methodology. Initially, this Wave-to-motion model is validated by comparison with previous experimental results for a floating cone cylinder shape (Buldra-FO3). A single, generic, vertical floating cylinder is contemplated then, that responds to the action of the passing regular waves excitation. Later, two equally sized vertical floating cylinders aligned with the incident wave direction are modeled for a variable distance between the bodies. For both unidirectional regular and irregular waves as an input in deep water, we approximate the convolutive radiation force function term through the Prony method. By changing the spatial disposition of the axisymmetric buoys, using for instance triangular or rectangular shaped arrays of three and four bodies respectively, the study delves into motion characteristics for regular waves. The results highlight efficient layouts for maximizing the energy production whilst providing important insights into their performance, revealing displacement amplification- and capture width-ratios, while deriving in possible interpretations of scenarios related to the the known park effect. These terms are encompassed by the novelty of a new conceptual Post-Processing methodology in the field, which leads to obtain an optimal distance for the separated bodies with effective energy absorption in a regular wave regime. In conclusion, this computational excursion envisions and proposes potential fields of study, which will surely enhance new connections and link this renewable energy form.

Positively charged polyelectrolytes hold significant potential as materials for creating antibacterial coatings. Water-soluble macromolecules can be easily deposited onto a treated surface through various techniques, forming a film that provides antimicrobial properties to the surface through electrostatic interactions with bacterial membranes. The structural and molecular weight characteristics of the polymers play a crucial role in the physical and mechanical properties of the coatings. In this study, we investigated the properties of branched polyethyleneimine (PEI) and linear polydiallyldimethylammonium chloride (PDADMAC) coatings with different molecular weights of polymer samples to determine their suitability as stable coatings with antibacterial properties against foodborne bacteria. Using thermogravimetric analysis, dynamometry, and dynamic light scattering, we examined the physicochemical and mechanical properties of the macromolecules in water solutions and in coatings. Microbiological study was conducted to analyze the biocidal activity of the polycations in solutions and on the surface of coatings. Our findings showed that the moisture saturation of the polycationic coatings did not significantly depend on the chemical nature of charged groups or the molecular weight or architecture of macromolecules. Moreover, biocidal activity was not found to depend on the molecular weights of PEI and PDADMAC. However, the lowering of the molecular weight of polymers resulted in the loss of cohesive forces in the coatings and to dramatically loss of the stability towards wash-off with water. The diffusion coefficient (D0) of macromolecules was identified as a key parameter for the wash-off mechanism. Films formed by molecules with D0 below 1×10-7 cm2/s demonstrated high resistance to wash-off procedures. We demonstrated that PEI and PDADMAC samples with high molecular weights showed high antimicrobial activity towards L. monocytogenes. Our results highlight the importance of macromolecule characteristics in the development of new biocidal coatings based on polycations.

Circular Economy (CE) is a growing topic among scholars, industry and government aiming at decoupling economic growth and development from the consumption of finite resources. CE incorporates different meanings, from reduce, reuse and recycle activities to environmental degradation or resource scarcity, and supported by specific indicators to attain sustainable development. However, so far, there has been no agreement to measure how effective an industry/product is in making the transition from linear to circular approaches, particularly those affected the society. This research work aims to perform a systematic literature review (n=60) to analyze and discuss how social aspects have been considered and integrated in the CE research so far. Moreover, this review provides and overview of the literature on social impact within CE, that resulted in three main outputs: a knowledge map of the CE, an analysis of social aspects within CE, and the theories/frameworks used to evaluate social impact of CE. Finally, this study brings to light how CE implementation can affect society and highlights the importance of social dimension in the domains of CE and policy-making community, which could help moving CE towards a sustainable development.

Photovoltaic modules should pass series of tests and examinations, verifying the electrical and thermal characteristics of the module, before being released to the market, examining the properties of the modules should undergo appropriate durability and efficiency tests under real outdoor conditions with exposure to climatic conditions and under laboratory conditions. The performance of photovoltaic cells depends on many factors, such as solar irradiance, module operating temperature, installation location, weather conditions and module shading. In this paper, three selected photovoltaic modules were examined using a large-scale steady-state solar simulator. The current-voltage (I-V) characteristics of the photovoltaic modules were experimentally tested and analyzed. The next step was to implement a three-layer artificial neural network model (MLP). The experimental data obtained in the previous step coupled with output data from MLP were then used in global sensitivity analysis (GSA). Experiments carried out on a large-scale stationary solar simulator showed differences between the values declared by the manufacturer and the values obtained from measurements of PV modules. The first module tested achieved the maximum power point greater than that specified by the manufacturer, while the other two showed power drops; it was 85-87% for the second module, and 95-98% for the third, respectively. The performed global sensitivity analysis (GSA) for the MLP model showed that the parameters: eff (22.9) and Voc/V (14.19) have the largest effect on the power-voltage relationship, while U (7.29) has the smallest effect. The usefulness of machine learning (ML) methods in the comparative analysis of PV modules has been proved.

5-Pentadecylresorcinol (C15) is a natural alkylresorcinol that has been shown to protect against complications caused by imbalanced nutrition. Although the exact mechanisms of beneficial activity of C15 are not known, we assume that the protective effects of C15 on metabolic health are mediated by their modulatory influence on the composition of the intestinal microbiota and functional activity. Cobamides and vitamin B12 are believed to be crucial modulators of mammalian gut ecosystems. We proposed that C15 may influence the representation of enzymes and pathways for vitamin B12 synthesis in the gut microbiome, providing compositional and functional changes in the microbial community. High-throughput metagenome sequencing of the contents of the small and large intestines of C57Bl6 mice fed a regular or high-fat diet with or without C15 supplementation was performed followed by reconstruction of the metabolic activity of the microbiota to clarify the role of C15 in vitamin B12 synthesis by the gut microbiota. It has been established that C15 significantly increases the representation of the cobalamin salvage pathway and enzymes in the microbiome of the large intestine of mice fed a high-fat diet. The genera Clostridium, AF12, and [Ruminococcus] had shown the highest number of correlations with enzymes for B12 synthesis and were negatively associated with the representation of probiotic bacteria. Therefore, the beneficial effect of C15 on the gut microbiota community can be achieved by modulating B12 synthesis that, in turn, serves as one of the key regulators of gut microbiota ecology.

Crystalline silver thin layers were obtained by high-energy pulsed laser ablation without heating of the deposition substrate. The fluid Plateau-Rayleigh (PRI), Rayleigh – Taylor (RTI) and Richtmyer – Meshkov (RMI) instabilities, as well as crown splash induced during pulsed laser deposition (PLD) in high energy regime, resulting in ring and pearl shaped structures, offer the benefit of increased sorption surface. These morphological structures obtained for the silver thin layers make them of interest for catalytic applications. The study presented with this work addresses both the fundamental and applied issues on the morphological structures obtained for the silver thin layer and their catalytic function in organic processes. In this sense, the catalytic action of the thin silver layer was highlighted by modifications of the Reactive Blue 21 dye (C.I.) in aqueous solution with sodium bicarbonate. Specific investigations and analyzes were carried out by electron microscopy and elemental analysis (SEM-EDX), atomic force microscopy (AFM) and profilometry, mass spectrometry, ablation plasma diagnosis, diffractograms (XRD), as well as IR spectroscopy (FTIR). In addition to the experimental investigation and analyzes, simulation of the ionization energy threshold was conducted in COMSOL for complementary evaluation on the involved processes and phenomena.

This article aims to analyze the relationship between non-obstructive coronary artery disease (NOCAD) and atrial fibrillation (AF), exploring the underlying pathophysiological mechanisms and implications for clinical management. NOCAD and AF are prevalent cardiovascular conditions that often coexist, yet their interrelation is not well understood. NOCAD, characterized by the presence of atherosclerotic plaques without significant luminal stenosis, can lead to ischemic necrosis of cardiomyocytes and their replacement with fibrous tissue, in this way sustaining the focal ectopic activity in atrial myocardium. Atrial fibrillation, on the other hand, is the most common sustained cardiac arrhythmia, associated with an increased risk of stroke and heart failure, which may accelerate atherosclerosis and may increase oxygen consumption in the myocardium, creating a mismatch between supply and demand, thus promoting the development or worsening of coronary ischemia. Therefore, NOCAD and AF seems to be a complex Interplay with one begets another.

We introduce a novel algebraic structure, termed algebra B, which generalizes Lie algebras through the definition of a non-associative and unital algebra. We demonstrate that algebra B retains essential properties such as bilinearity and antisymmetry, and satisfies both the Jacobi and Malcev identities; this occurs when the product operations of Lie and Malcev algebras are derived from the product operation defined in our algebra. By examining the connections between algebra B, Malcev algebras, and Lie algebras, we establish that algebra B effectively generalizes these structures. Furthermore, we show that algebra B can generate complex entities with a novel structure distinct from those currently known. Our findings lay the groundwork for future investigations into the practical applications and further theoretical development of this new algebraic framework.

A simple protocol for preparation of O-acylated enol form - (R/S)-ethyl-2-acetoxy-4-phenyl-4H-chromene-3-carboxylate 5 was presented. The compound was characterized by 1H-, 13C-and DEPT135 NMR spectra, including {1H,1H} COSY, {1H,13C} HSQC, {1H,13C} HMBC and 2D-NOESY spectra. The preferred regioselectivity for O-acylation of 3,4-dihydrocoumarin 5 in the presence of substituent in 4-th position in the chroman ring and accounting the steric hindrance of the ester group in 3-th place was confirmed.

Organisms are adapted to each other and the environment, not as tradition would have it, because natural selection made them that way, but because there is inbuilt striving towards stability and equilibrium. A General Theory of Behaviour connects imagery, affect and action with the central executive system we call Consciousness. The General Theory is founded on the assumption that the primary motivation of all of Consciousness and intentional behaviour is Psychological Homeostasis. Psychological homeostasis is as important to the organisation of mind and behaviour as Physiological Homeostasis is to the organisation of bodily systems. Consciousness processes quasi-perceptual images independently of the input to the retina and sensorium. Consciousness is the “I-Am” control centre for integration and regulation of (my) thoughts, (my) feelings and (my) actions with (my) conscious mental imagery as foundation stones. Imagery vividness, a combination of clarity and liveliness, is essential to imagining, remembering, thinking, predicting, planning and acting. Assessment of vividness using introspective report is validated by objective means such as fMRI. A significant body of work shows that vividness of visual imagery is determined by the similarity of neural responses in imagery to those occurring in perception of actual objects and performance of activities. I am Conscious, therefore I am.

Forty-five male Dorper crossbred lambs (40.17 ± 0.35 kg BW) were used in order to investigate the effects of the duration of calcium propionate (CaPr) supplementation in lambs finished with zilpaterol hydrochloride (ZH) on the productive performance, carcass characteristics, and meat quality. Lambs were individually housed and fed a finishing-diet for 42 d before being slaughtered. Lambs received the following treatments: 1) No additives (CTL), 2) ZH supplementation for 28 d (with 3 d ZH withdrawal before slaughter) at a dosage of at 7.2 mg/kg diet (ZH), for treatments 3, 4, and 5, lambs received ZH and 10g CaPr/lamb/d throughout the entire phase (42 d), or during the last 28 or 14 d before slaughter. Compared to CTL, ZH lambs exhibited a similar average daily gain (ADG) but had lower dry matter intake (DMI), leading to increased feed efficiency. Supplementing with ZH alone did not affect carcass traits, visceral mass, whole cuts, or meat quality. Lambs that received both CaPr and ZH exhibited quadratic increases (p < 0.05) in final BW (FBW), ADG, and dressing percentage (D%). These increases were optimal at an estimated inclusion durations of 26 d for FBW, 30 for ADG, and 39 d for D%. The ADG:DMI ratio and the longissimus muscle area (LMA) both exhibited quadratic increases (p < 0.05). The optimal duration of CaPr supplementation for ADG:DMI ratio was found to be 28 d, while for LMA, it was 14 d. As the period of CaPr supplementation increased, there was a linear increase (p <0.05) in hot carcass weight, leg circumference, and whole cuts of breast IMPS209 and shoulder IMPS207. Cook loss percent increased quadratically (p < 0.05), being higher when CaPr was included for an estimated duration of 26 d. As the duration of CaPr supplementation increased, the purge loss percentage (PLR) also increased linearly (p < 0.05). In conclusion, including CaPr in the diet for a duration of 28 d in lambs improved the response to ZH supplementation on the productive performance, carcass weight and some whole cuts. However, it can also have a negative effect on PRL%.

“Pecorino” is a typical semi-hard cheese obtained with raw or heat-treated sheep milk using procedures to valorize the raw material's chemical and microbiological properties. In the present study, using a high throughput method of 16S rRNA gene sequencing, we assessed the evolution of the microbiome composition from milk to Pecorino cheese in artisanal processes using milk from Comisana and Lacaune sheep breeds. The comparative analysis of the bacterial com-munity composition revealed significant differences in the presence and abundance of specific taxa in the milk microbiome of the Comisana and Lacaune breeds. NGS analysis also revealed differences in the curd microbiome related to dairy farming practices, which have a relevant effect on the final structure of the Pecorino-cheese microbiome.

This study aimed to investigate the impact of specific single nucleotide polymorphisms (SNPs) on clinical and laboratory outcomes in COVID-19 patients receiving Paxlovid treatment. The primary focus was on genetic variants in IFNAR2, OAS1, OAS3, and ACE2. Laboratory parameters were assessed at admission and discharge, including oxygen saturation, white blood cell count, absolute neutrophil and lymphocyte counts, erythrocyte sedimentation rate, platelet count, hematocrit, and various liver and kidney function tests. The results demonstrated significant associations between certain SNPs and clinical outcomes. Patients with the IFNAR2 rs2236757 G allele exhibited improved oxygen saturation and lower eosinophil counts. The OAS3 rs10735079 and OAS1 rs10774671 G allele was associated with lower eosinophil and total bilirubin levels. Furthermore, patients with the ACE2 rs2074192 C allele showed increased segmented neutrophils and AST levels, while the T allele was associated with lower total bilirubin levels. These findings indicate that the efficacy of Paxlovid treatment may be influenced by genetic variations in IFNAR2, OAS1, OAS3, and ACE2. Further research is warranted to investigate the potential therapeutic implications of these genetic markers.

In the frame of the I-MOVE-COVID-19 project, a cohort of 2050 patients admitted in two Spanish reference hospitals between March 2020 and December 2021 was selected, and a range of clinical factors data were collected at admission to assess their impact on the risk COVID-19 severity outcomes through a multivariate adjusted analysis and nomograms. The need for ventilation and ICU admission were found directly associated with a higher mortality risk (OR 6.9 and 3.2, respectively). The clinical predictors of mortality were need for ventilation and ICU, advanced age, neuromuscular disorders, thrombocytopenia, hypoalbuminaemia, dementia, cancer, elevated CPK and neutrophilia (OR between 1.8 and 3.5), whilst the presence of vomiting, sore throat and cough diminished risk of death (OR 0.5, 0.2 and 0.1 respectively). Admission to ICU was predicted by the need for ventilation, abdominal pain and elevated LDH (OR 371.0, 3.6 and 2.2, respectively) as risk factors; otherwise, it was prevented by advanced age (OR 0.5). In turn, the need for ventilation was predicted by low oxygen saturation, elevated LDH and CPK, diabetes, neutrophilia, obesity and elevated GGT (OR between 1.7 and 5.2), whilst prevented by hypertension (OR 0.5). These findings could enhance patient management and strategic interventions to combat COVID-19.

Background: Despite advances in the treatment of hepatocellular carcinoma (HCC) over the last few decades, treatment opportunities for patients with HCC remain limited. HCC is the most common form of liver cancer, accounting for approximately 90% of all cases worldwide. Moreover, apart from the current pharmacological interventions, hepatic resection and liver transplantation are the mainstay curative approaches for patients with HCC. Methods: This systematic review included phase I, II, III, and IV clinical trials (CTs) and randomized controlled trials (RCTs) on current treatments for patients with HCC in an Asian population (2013–2023). A total of 427 articles were screened, and 184 non-duplicate publications were identified. After screening titles and abstracts, 96 publications were excluded, and another 28 were excluded after full-text screening. The remaining 60 eligible RCTs/CTs were finally included. Results: Sixty clinical trials fulfilled our inclusion criteria and screened 36 drugs as monotherapy or combination therapy for HCC. Most studies used sorafenib alone or in combination with any of the treatment regimens. Lenvatinib or atezolizumab with bevacizumab was used for HCC after initial sorafenib treatment. Eighteen studies compared the efficacy of sorafenib with that of other drugs, including lenvatinib, cabozantinib, tepotinib, tigatuzumab, linifanib, erlotinib, resminostat, brivanib, tislelizumab, selumetinib, and refametinib. Conclusion: This study provides comprehensive insights into effective treatment interventions for HCC in Asian populations. The overall assessment indicated that sorafenib alone or in combination with atezolizumab and bevacizumab has been the first treatment choice in the past decade to achieve better outcomes in patients with HCC in an Asian population

Cloud platforms are widely employed in today's educational context to enhance collaborative learning and the overall quality of the teaching-learning process. In 2016, Nextcloud was im-plemented in the Faculty of Chemical Engineering at the Technological University of Havana "José Antonio Echeverría" (CUJAE), Cuba. Subsequently, an evaluative phase was conducted to ensure the continuous development of the platform. The objective was to assess the use and ac-ceptance of the Nextcloud platform from the perspective of students and professors in the Fac-ulty. An exploratory, non-experimental, and cross-sectional study was conducted. Data was col-lected through observation and a survey. Matomo Analytics tool was employed for observation, revealing low visitation numbers. The survey was based on the Unified Theory of Acceptance and Use of Technology model. Better results were obtained in positive acceptances compared to negative ones, both for professors and students. It is concluded that the evaluation of the Next-cloud platform is infrequently used by users; however, there were higher positive acceptances than negatives from the perspectives of both students and professors.

The Chagas disease (CD) is an endemic infectious disease in a large part of Latin America. This disease is characterized by the fact of being caused by the parasite Trypanosoma cruzi. Some symptoms of this disease are cardiopathies and gastrointestinal problems. Therefore, the commonly used treatment consists of nitro drugs such as benznidazole and nifurtimox, which target the nitroreductase enzyme that docks to the coenzyme flavin mononucleotide (FMN) and an oxidation-reduction reaction is generated. From this reaction, the nitro chemical function of benznidazole and nifurtimox is reduced to amine. This amine in turn interacts with the parasite´s DNA. In vitro tests experimentally help in the study of the parasite resistance to the drug benznidazole. This fact could explain how nonsynonymous mutations in the nitroreductase (NTR) enzyme do not allow the anchorage of the FMN coenzyme and as a consequence the parasite susceptibility to benznidazole decreases as the drug cannot be reduced. The structural relations from the hybrid Quantum Mechanics-Molecular Mechanics (QM/MM) allow to detect the small changes generated in the system, considering a charge distribution associated with the structure, angle changes, interaction distances, potential surface calculations between the wildtype enzyme and the mutation found.

Here we present 1. a model for amplicon sequencing 2. a definition of the best assignment of a read to a set of reference sequences 3. strategies and structures for indexing reference sequences and computing the best assign- ments of a set of reads efficiently, based on (ultra)metric spaces and their geometry The models, techniques, and ideas are particularly relevant to scenarios akin to 16S taxonomic profiling, where both the number of reference sequences and the read diversity is considerable.

Participatory landscape conservation is an innovative approach that weaves theory and practice to bridge the gap between theoretical models and practical applications. Intertropical regions as the case of Mexico face challenges to conciliate regional governability, social justice, and nature conservation. The State of Michoacan is one of these regions where the challenges exacerbate since nature conservation is last due to its ongoing territorial disputes. We implemented the participatory landscape conservation approach by creating a complementary form of protected areas with ongoing conflicts, drought conditions, and extreme poverty. We conducted participatory mapping and land cover/use analyses as main methodological tools to reach consensus among stakeholders. We integrated, macro, micro and social scales to provide sound arguments to integrate local, scholar and policy makers perceptions. The outcomes of the participatory mapping analyses were assessed. The present papers provide evidence of the positive outcome of using a Participatory Landscape Conservation to establish a Biosphere Reserve, safeguarding one of the most biologically diverse and delicate ecosystems consisting of seasonally dry tropical forests within a rather disputed region. We discussed the relevance of our findings and compared them to ongoing regional and global trends in the light of other forms of establishing protected areas.

A common fault in turbomachinery is rotor--casing rub. Shaft vibration, measured with proximity probes, is the most powerful indicator of rotor-stator rub. However, in machines such as aeroderivative turbines, with increasing industrial relevance in power generation, constructive reasons prevent the use of those sensors, being only acceleration signals at selected casing locations available. This implies several shortcomings in the characterization of the machinery condition, associated with a lower information content about the machine dynamics. In this work we evaluate the performance of the Continuous Wavelet Transform to isolate the accelerometer signal features that characterize rotor-casing rub in an aeroderivative turbine. The evaluation is carried out on a novel rotor model of a rotor flexible casing system. Due to damped transients and other short-lived features that rub induces in the signals, the Continuous Wavelet Transform proves being more effective than both Fourier and Cepstrum Analysis. This creates the chance for enabling early fault diagnosis of rub before it may cause machine shutdown or damage.

MicroRNAs are small non-coding RNAs, which contribute to the regulation of many physiolog-ical and pathological processes. Conventionally, miRNAs perform their activity in the cyto-plasm, where they regulate gene expression by interacting in a sequence-specific manner with mature messenger RNAs. Recent studies point to the presence of mature miRNAs in the nucleus. This review summarizes current findings regarding the molecular activities of nuclear miRNAs. These molecules can regulate gene expression at the transcriptional level by directly binding DNA on the promoter or the enhancer of regulated genes. MiRNAs recruit to these regions dif-ferent protein complexes, resulting both in activation or repression of transcription, through a number of molecular mechanisms. Haematopoiesis is presented as a paradigmatic biological process whereby nuclear miRNAs possess a relevant regulatory role. Nuclear miRNAs may af-fect gene expression also acting on nuclear mRNA processing and on the biogenesis of miRNA themselves by regulating pri-miRNA maturation. Overall, nuclear miRNAs are biologically ac-tive molecules that can be critical for the fine tuning of gene expression and deserve further studies in a number of physiological and pathological conditions

With the current increase in the demand from animal and agricultural products, management of agrowaste has become critical to avoid greenhouse gas emissions. The present article investigates the applicability of ammonium bicarbonate synthesis via flash distillation to valorize and stabilize several types of anaerobic digestate produced from individual fermentations of amino acids. Prior to the development of the model in Aspen Plus v12, the description of the system aqua-ammonia-carbon dioxide provided by the electrolyte non-random two-liquid property method was validated with empirical data available in the literature. The content of CO₂ in the digestate was found to be responsible of the OH alkalinity (0.4 equivalents of acid/kg digestate), while the partial and total alkalinities (0.8 eq/kg digestate) were essentially derived from the content of NH₃. The most suitable conditions for the flash distillation were 95 ⁰C and 1 bar with the condensation occurring at 25 ⁰C. However, in order to attain the precipitation of NH₄HCO₃ in the distillate, it was necessary to consider digestates with a moisture content of 50 wt.%, since the minimum levels of inorganic nitrogen and inorganic carbon were not attained otherwise. Even under these conditions, few amino acids (i.e. arginine, glycine, and histidine) were able to provide an anaerobic digestate, upon fermentation, that would be suitable for NH₄HCO₃ stabilization. Despite alanine digestate and glutamine digestate presented sufficient concentrations of inorganic nitrogen and inorganic carbon, the NH₄HCO₃-stabilization was not feasible due to the limited volatilization of NH₃. The process of stabilization with a capacity of a tonne of digestate per hour was improved by adding hydrochloric acid or sodium hydroxide at rates 44 kg/h, leading to production of 34 kg NH₄HCO₃/h. The economic viability of this process needs to be investigated considering not only the market value of the isolated inorganic fertilizer but the carbon credits saved, resulting from handling a more stabilized organic manure. Furthermore, given the role of the volatile elements of the biogas as endogenous stripping agents, it is recommended to use a fresh and saturated digestate as feed for the flash distillation.

(1) Background: A wide literature based on loading and unloading bending tests has been carried out over the half past century for assessing the force released by superelastic wires. The aim of this investigation is not only to characterize a broadly described superelastic NiTi and a novel CuNiTi archwire, but also to provide novel insights into the load vs deflection profiles. A harmonic scenario for superelastic wires will be shown as temperature is kept constant at 37°C. However, a completely different picture will be highlighted as a temporary heating step up to 50°C is introduced within the force vs deflection profiles. (2) Methods: A variety of NiTi and a novel CuNiTi round and rectangular cross-section archwires have been investigated. Static 3-point bending tests up to a deflection level of 3.0 mm have been carried out for detecting the unloading force plateau levels occurring at 37°C. A hold deflection step of 5 min at deflection levels occurring along the unloading plateau extension is introduced. The effect of a temporary heating up to 50°C on the force plateau level released by the investigated wires is analyzed. (3) Results: Mechanical profiles suggest that the plateau force levels detected at 37°C are consistent with those broadly reported in the literature, but they only represent a single block puzzle of the force scenario that a superelastic wire releases during the orthodontic treatment. (4) Conclusions: Once a superelastic wire is bent and clinically applied, the effect of a temporary heating up to 50°C (e.g. hot food or drink ingestion) produces a significant plateau force increase whose magnitude depends on the deflection level. The highest force increase of about 50% and 40% have been detected at deflection levels located at the beginning of the unloading plateau extension for NiTi and CuNiTi wires, respectively.

Most cervical cancer cases are a result of persistent high-risk Human papillomavirus (HPV) infections. Cervical cancer is prevalent in LMICs especially in SSA where it is second most prevalent cancer. In South Africa, it is the second most common cancer affecting women aged between 15 and 44 years. The host immune response has been shown as an important factor in controlling the progression or regression of high-risk HPV infection of the cervix to cervical cancer. The risk of cervical cancer is known to be influenced by the host's genetic diversity, particularly by immune response-regulating genes such as the Human Leukocyte Antigen (HLA) class I and II genes. HLA class I genes present viral peptides to CD8+ T cells which are restricted and pre-programmed for cytotoxic functions. There is very little known about the HLA genes of South African women and how these influence outcome of HPV infections. This review aims to understand the role and influence of HLA class I genes in HPV clearance, persistence, and CD8+ T cell mediated immunity in African women by examining existing literature in this area. Understanding this role can influence and inform therapeutic vaccine design that is population specific.

Coastal inundation is recently requiring a significant attention worldwide. The increasing frequency and intensity of extreme events (sea storms, tsunami waves) are highly stressing the coastal envi-ronments, e.g. endangering a large number of residential areas, ecosystems, tourist facilities, and also leading to potential environmental risks. Predicting such events and the generated coastal flooding is thus of paramount importance and can be reached by exploiting the potential of different tools, like remote sensors and numerical modeling. To this aim, a combination is possible between marine radars and wave-resolving propagation models. While instruments like X-band radars are able at precisely reconstructing both wave field and bathymetry within a coastal area that is some kilometers offshore, wave-resolving Boussinesq-type models can reproduce the wave propagation in the nearshore and the consequent coastal flooding. The present work illustrates the reconstruc-tion of coastal data (wave field and seabed depth) conducted using radar signals and a specifically suited data processing, named “Local Method”, and the use of such coastal data to run numerical simulations of wave propagation (using the FUNWAVE-TVD solver) aimed at reproducing coastal inundation over different scenarios. Such scenarios are built using two different European beaches, i.e. Senigallia (Italy) and Oostende (Belgium), and three different directional spreading values, to evaluate the performances in case of either long- or short-crested waves. The overall validation of the methodology, in terms of maximum inundation, shows good performances, especially in case of short-crested wind waves. Furthermore, the application on the Oostende beach demonstrates that the present methodology might work only using open-access tools, i.e. an easy investigation of the coastal inundation and a potential low-cost integration into early warning systems.

Drosophila melanogaster serves as a important research model both for genetic investigations and for the study of metal toxicity, facilitating the elucidation of physiological mechanisms comparable to those of human organisms. In our research, we evaluated the toxicity effect resulting from exposure to various concentrations of lead and copper on the prolificity rates throughout the life cycle (egg-adult) of four genotypes of Drosophila melanogaster: wild-type (control), white, brown, and white-vestigial. During our study, the prolificity rates were examined across three repetitions under the impact of exposure to concentrations of 0.50, 1.00, 2.00, and 4.00 mM of copper (CuSO₄) and lead (Pb(C₂H₃O₂₎₂). Prolificity rates throughout the life cycle exhibited variations as a direct consequence of genetic factors, the concentration of exposure, and the specific type of metal, either copper or lead. The mutant white-vestigial genotype revealed an IC₅₀ concentration for prolificity inhibition at lower doses of 2.00 mM for copper and 4.00 mM for lead, in contrast to the control genotype (wild-type), which exhibited an inhibition concentration rate >IC₅₀ of 4.00 mM only in the case of copper. Our results concluded that the (i) dose influences the prolificity rate in a directly proportional manner, (ii) comparative analyses between copper and lead revealed that copper displayed toxicity across all genotypes within the concentration range of 0.50 mM to 2.00 mM. In contrast, lead exhibited toxicity within the concentration range of 1.00 mM to 4.00 mM, highlighting a (iii) more acute toxicity characteristic in the case of copper. Thus, the results of this research reflect the importance of using Drosophila melanogaster as a genetic model in the comparative study of the interaction between genetic factors and the toxicity of metals, offering significant insights into monitoring their impact and defining the maximum permissible doses on organisms.

Less than half of e-waste plastics is sorted worldwide and this rate is likely to decline as major processing countries have banned importation of e-waste plastics. This forces the development of decentralized processing facilities, also known as microfactories. The present work investigates the recyclability of different grades of acrylonitrile-butadiene-styrene (ABS) copolymer, polycarbonate, and polypropylene, which were found to be very abundant in a recycling site in the UK. The determination of the matrix relied on the resin identification code imprinted in the e-waste plastic and subsequent FTIR analysis. The melt-blend extrusion technology enabled the valorization of the wasted thermoplastics as 3D filament without significant degradation of the polymers. The recycled materials maintained the tensile strength around 2.5 MPa in agreement with the specifications offered by virgin polymers. Further characterization was done by means of laser microscope, thermogravimetric analysis, and XRF to determine the commercial viability of the recycled filament. A modified solvent-based method was developed with acetone to remove the brominated flame retardants: 25g/100mL, 30 minutes of contact time, and 4 extraction steps. The FTIR results show that the degradation of the rubbery dispersed phase corresponding to the butadiene can be accumulated in the less soluble fraction of the waste ABS.

Predicting the prices of cryptocurrency owing to its volatility, instability, and other factors has been challenging; investors and traders especially in Nigeria have been on a constant look for a more reliable way of knowing market trends and prices and while there has been so many research conducted using deep learning, the results for which has fall short of what investors could called a strong predictor. This research reviewed the results of many works that had been done and proposed two types of recurrent neural network (RNNs) namely Long Short-Term Memory and Gated Recurrent Unit (GRU) for predicting the future prices of two of the most common crypto assets namely Bitcoin (BTC) and Ethereum (ETH), these two were selected based on their popularity, the volume traded and their market capitalization. The experiment was conducted in a GPU Jupyter Notebook environment and the performance of our experiment was evaluated on a test set using root mean square error (RMSE) and based on its values, the LSTM presented a better performance with rsme scores of 654.66, and 80.30 respectively for BTC and ETH as compared to GRU. The paper proceeds further to compare the results of this experiment with other related works and we discovered that its performance is a great improvement.

The comorbidity of osteoarthritis and type 2 diabetes mellitus represents a complex clinical challenge and complicates patient management due to the interplay of overlapping pathophysiological mechanisms. The research aimed to analyze the exacerbation of clinical symptoms and biochemical markers in patients with osteoarthritis and type 2 diabetes mellitus compared to those with osteoarthritis. We utilized various assessment methods to measure the patient cohorts' inflammation, oxidative stress, and glycemic control. The study also involved the administration of alpha-lipoic acid to patients with comorbid osteoarthritis and type 2 diabetes mellitus and monitored its effects on joint function, inflammatory markers, oxidative stress levels, and glycemic control. Our findings revealed that the presence of type 2 diabetes mellitus significantly intensified osteoarthritis symptoms and altered biochemical markers, including increased inflammation, elevated oxidative stress, and disrupted immunological balance. The treatment with alpha-lipoic acid resulted in improved joint function, reduced inflammation and oxidative stress levels, and better glycemic control. Additionally, it was identified several potential predictors for developing osteoarthritis and type 2 diabetes mellitus comorbidity. The results underscore the detrimental impact of type 2 diabetes mellitus on osteoarthritis and highlight the beneficial effects of alpha-lipoic acid in alleviating some of the adverse consequences associated with this comorbidity. Nonetheless, further research is necessary to comprehensively evaluate the therapeutic efficacy of alpha-lipoic acid and its long-term effects on managing comorbidity of osteoarthritis and type 2 diabetes mellitus.

Natural products (NPs) are a rich source of structurally novel molecules, and the chemical space they encompass is far from being fully explored. Over history, NPs have represented a significant source of bioactive molecules and have served as a source of inspiration for developing many drugs on the market. On the other hand, computer-aided drug design (CADD) has contributed to drug discovery research, mitigating costs and time. In this sense, compound databases represent a fundamental element for the CADD. This work reviews the progress toward developing compound databases of natural origin, particularly databases developed in Latin America, and their practical applications in the drug discovery area. We also survey the computational methods, emphasizing chemoinformatic approaches to profile natural product databases.

Patients with locally advanced head and neck squamous cell carcinoma (HNSCC) frequently require primary radiochemotherapy (RCT). Despite intensity-modulation, desired radiation-induced effects observed in HNSCC, may also be observed as side-effects in healthy tissue e.g. the sternocleidomastoideus muscle (SCM). These side-effects (e.g. tissue fibrosis) depend on the interval between completion of RCT and restaging-CT. For salvage surgery, the optimal time window for surgery is currently postulated between 6 and 12 weeks after completion of RCT. Thus, no extensive tissue fibrosis is to be expected. This interval is based on studies exploring surgical complications. Studies directly exploring radiation-induced changes of the SCM in HNSCC-patients are sparse. The present study quantifies tissue alterations in SCM and paravertebral musculature (PVM) after RCT applying radiomics to determine the optimal time window for salvage surgery. Three radiomic key parameters 1) volume, 2) mean positivity of pixels (MPP) and 3) uniformity were extracted with mint lesionTM in the staging-CTs and restaging-CTs of 98 HNSCC-patients. Of these, 25 were female, the mean age was 62 (±9.6) years and 80.9% were UICC Stage IV. The mean restaging-interval was 55 (±28; range29-229) days. Only the mean volume significantly decreased after RCT from 9.0 to 8.4 and 96.5 to 91.9 ml for SCM and PVM, respectively (both p=0.007, both Cohen’s d=0.28). In addition, the mean body mass index (BMI) decreases from 23.9 (±4.2) to 21.0 (±3.6) kg/m² (p<0.001); Cohen's d = 0.9). The mean BMI-decrease significantly correlated with the volume decrease for SCM (r=0.27; p=0.007) and PVM (r=0.41; p<0.001). If t-test p-values were adjusted for the BMI-decrease, no significant change in volumes for SCM and PVM was observed (both p>0.05). The present data supports the postulated optimal interval for salvage surgery of 6 to 12 weeks. Irrespective of the remaining risk-benefit ratio of salvage surgery, the risk of additional surgical complications due to fibrosis is not supported by the present observations.

We have much to learn from historic buildings. The fact that they are still standing is obvious, but unfortunately often not appreciated. In this paper the results obtained from a series of parametric analyses, where the influence that geometric and mechanical parameters have in the structural response of existing cob walls within an Irish context, are presented. A design of experiments using central composite designs was implemented along with analysis of variance following two computational approaches, namely, finite element method and kinematic limit analysis. As results, a series of response surfaces and parametric equations with which it is possible to compute safety factors and collapse multipliers (within the range of values studied) are provided. Based on the results obtained, it could be concluded that traditional cob walls in Ireland are very robust. Relatively high acceleration values, unlikely to happen in a low seismic hazard region such as Ireland, would be needed to start the collapse mechanisms studied or cause yielding in typical vernacular cob walls. Furthermore, the equations generated with the refined regression models, can be used by practitioners as a first approach to estimate the safety levels of existing cob buildings with similar characteristics.

The Upper Hunter Valley is a major coal mining area containing approximately 40% of the currently identified total coal reserves in New South Wales (NSW), Australia. Due to the ongoing increase of mining activities, PM10 (air-borne particle with an aerodynamic diameter less than 10 micrometres) pollution has become a major air quality concern in local communities. This paper summarises the spatial and temporal variability modes of PM10 pollution in the region, based on long-term multi-site monitoring data and the application of the rotated principal component analysis (RPCA) and wavelet analysis techniques. RPCA identified two distinct air quality clusters/subregions in the valley, one in the west/northwest, the other in the southeast. Wavelet analysis revealed the annual cycle to be most persistent temporal mode of PM10 variability in both subregions, with intermittent signals observed at time scales of around 120, 30~90 and under 30 days. How these variation modes are related to the effects of local PM10 emissions and the influence of meteorology at different time scales deserves further attention in future work. The findings will be used in air quality reporting and forecasting in NSW. The methodology and results can also be useful for air quality research in similar regions elsewhere.

Shiga toxins (Stxs), and more specifically the Stx2a subtype, are the major virulence factors involved in enterohemorrhagic Escherichia coli (EHEC)-associated hemolytic uremic syndrome (eHUS); a life-threatening disease causing acute kidney injury, especially in children. Cleavage of Stxs A subunit, when followed by reduction, boosts the enzymatic activity causing damage to targeted cells. This cleavage was assumed to be mostly mediated by furin during Stx intracellular trafficking. Cleavage of A subunit, without reduction, changes the binding properties of Stxs for blood components during HUS pathogenesis. To investigate whether the cleavage could occur in the intestine, even prior entering target cells, Stx2a structure was characterized after its exposure to specific host factors present in human stool. The structure of Stx2a A subunit was determined by immunoblotting after electrophoretic separation under reducing conditions. Trypsin and chymotrypsin-like elastase 3B (CELA3B), two serine proteases, were identified as potential candidates that may trigger the extracellular cleavage of Stx2a A subunit directly after its secretion by EHEC in the gut. Whether this observation indeed translates to natural infections and plays a role in eHUS pathogenesis has yet to be determined as well as whether host's protease profile could affect disease development by changing the toxin’s biological features.

The study was carried out in zone 7 of Ecuador, in ecosystems of the Southern Montane Evergreen Forest of the Eastern Cordillera of the Andes that goes from 2200 to 3000 masl. In the Evergreen Seasonal Lower Montane Forest of Catamayo-Alamor, which ranges from 1600-2000 meters above sea level and finally in the Semideciduous Foot Montane Forest of Catamayo-Alamor, which ranges from 400-1600 meters above sea level. The objective was to know the occurrence, structure and abundance of J. neotropica. The investigation consisted of collecting secondary information on the occurrence of the species, to later verify it in situ. Six sites with areas ≥ 0.5 hectares were identified, four in the province of Loja and two in the province of Zamora Chinchipe. Regarding the structure, it was determined that there are significant statistical differences as well as in the dasometric variables between one site and another, presenting better growths El Tundo with average values in DAP(cm)= 45.16; G(m2) = 1.41; HT(m)= 19.22; HC(m)= 13; VC(m3) = 3.55; VT(m3) = 5.22. Regarding the Morisita index, the species presents adistribution pattern &gt;1. Regarding abundance, it was determined that Algeria presented a maximum of 297 (ind/ha), and La Victoria 46 (ind/ha) with a minimum.

Hybrid organic–inorganic perovskites (HOIPs) are promising materials in several fields related to electronics, offering long carrier-diffusion lengths, high absorption coefficients, tunable band gaps, and long spin lifetimes. Recently, chiral perovskites have attracted a huge interest thanks to the possibility of further widening the applications of HOIPs. Chiral materials, being intrinsically non-centrosymmetric, display several attractive physico-chemical properties, including circular dichroism, circularly polarized photoluminescence, nonlinear optics, ferroelectricity, and spin-related effects. Recent studies have shown that chirality can be transferred from the chiral organic ligands into the inorganic perovskite framework, resulting in materials combining the advantages of both chirality and perovskite superior optoelectronic characteristics. Thus, chiral HOIPs have emerged as promising materials for chiroptoelectronic, spintronic, and ferroelectric applications. Here, we report a summary of the latest advances in the field of chiral HOIPs, with a specific focus on lead-free materials and on the first attempts to understand the correlation between the crystal structure features and the chirality-induced functional properties

Rural women constitute one of the most marginalized and vulnerable groups in the world. Despite playing a critical role in sustainable development and food security, they face systemic inequalities and structural constraints that limit their access to resources, services and opportunities. The purpose of this research is to identify advances and setbacks in the formulation of 17 SDG indicators for rural women. Systematic Review Registered in PROSPERO: CRD42023420583. Sixteen articles were included. Three indicators were identified: entrepreneurship, empowerment and gender equality. Due to its relevance in rural areas where women have an active role in family income through cooperatives, associations and companies to improve quality of life and that of their community, however, aspects of discrimination are still evident in gender and inequality in participation in economic spheres and decision making.

Spodoptera frugiperda is an invasive pest that has spread in various parts of the world. These pests have the ability to spread and adapt highly to new habitats. Until now, it is not known with certainty the distribution of these invasive pests in Eastern Indonesia, especially Bali and Nusa Tenggara. This study aims to map the spatial distribution and genetic distribution of S. frugiperda which damages maize in the areas of Bali and Nusa Tenggara. This research was conducted using a survey method from May to September 2022 covering the islands of Bali, Lombok, Sumbawa, Sumba, Flores, and Timor. The results showed that S. frugiperda had spread evenly in Bali and Nusa Tenggara. The results of PCR amplification in the COI gene from 9 sample isolates from all research locations showed the similarity of DNA bands leading to the Spodoptera frugiperda species with a banding pattern length of 683 – 697. These results indicated that the distribution of genetic variants of corn caterpillars in Bali, NTB, and NTT was confirmed as S. frugiperda species. However, the isolated gene S. frugiferda, which was shown by the alignment results of the sequences from Lombok, was confirmed as a different strain from strains from Bali, Sumba, Sumbawa, Flores, and Timor. This incident can be seen from the difference in the protein base composition of S. frugiperda from Bali, Sumba, Sumbawa, Timor, and Flores. The results of phylogenetic analysis in this study confirmed 3 clusters of the genetic closeness of S. frugiperda. Cluster-1 comes from the results of the search for specimens of JB FAW and KB FAW from Bali, SB FAW and SB FAW Sorghum from Sumba, SW FAW from Sumbawa, KP FAW from Timor, and FL FAW from Flores. Cluster-2 is an isolate outside of our species. Cluster-3 comes from the search for LT and LS FAW specimens from Lombok. The genetic distance between cluster-1 and cluster-3 is quite far, which is 0.20 mu.

This study investigated the presence and characteristics of Juglans neotropica in three ecosystems in Southern Ecuador: Montane Evergreen Forest, Evergreen Seasonal Lower Montane Forest, and Semideciduous Foot Montane Forest. The main focus was on the species' multipurpose nature as both a fruit and timber source. Six study sites, totaling at least 0.5 hectares each, were established, with four in Loja province and two in Zamora Chinchipe province.The results showed significant differences in dendrometric variables across the sites, with the most favorable growth recorded in The Tundo, where trees exhibited an average diameter at breast height (DBH) of 45.16 cm, basal area (G) of 1.41 m2, total height (TH) of 19.22 m, canopy height (CH) of 13 m, cubic volume (CV) of 3.55 m3, and total volume (TV) of 5.22 m3. The species displayed a clumped distribution pattern, as indicated by a Morisita index greater than 1. Regarding abundance, the highest density of 297 trees per hectare was found in Argelia, while Victoria had the lowest density of 46 trees per hectare. This research highlights the importance of Juglans neotropica as a multipurpose species, providing both valuable fruits and wood resources in the studied ecosystems of Southern Ecuador.

Keywords: Pain; Nociception; Disorders of Consciousness; Consciousness

Sparkling wines elaborated by means Ancestral method, also called Pét-Nats, are nowadays gaining an increasing share of the market. However, the scientific information about these wines is very scarce. For that reason, the aim of this research was to compare the physicochemical composition and sensory attributes of a representative sampling of commercial sparkling wines elaborated by Ancestral and Traditional methods. Ancestral sparkling wines were more heterogenous than Traditional sparkling wines because some of them showed lower internal pressure, higher turbidity, higher colour intensity and less foamability. These differences would be probably because the ancestral elaboration protocol is not so well defined as in the case of Traditional sparkling wines. However, Ancestral method has the advantage of being able to work with riper grapes and with lower doses of sulphur dioxide.

Chiroptical responses have been an essential tool over the last decades for chemical structural elucidation due to their exceptional sensitivity to geometry and intermolecular interactions. In recent times, there has been an increasing interest for the search of more efficient sensing by the rational design of tailored chiroptical systems. In this Review article, advances on chiroptical systems towards their implementation in sensing applications are summarized. Strategies to generate chiroptical responses are illustrated. Theoretical approaches to assist in the design of these systems are discussed. Development of efficient chiroptical reporters in different states of matter, essential for the implementation in sensing devises, is reviewed. In the last part, remarkable examples of chiroptical sensing applications are highlighted.

This study investigated the influence of single nucleotide polymorphisms (SNPs) in genes asso-ciated with the interferon pathway (IFNAR2 rs2236757), antiviral response (OAS1 rs10774671, OAS3 rs10735079), and viral entry (ACE2 rs2074192) on COVID-19 severity and their association with non-alcoholic fatty liver disease (MAFLD). We did not observe a significant association between the investigated SNPs and COVID-19 severity. While the IFNAR2 rs2236757 A allele correlated with higher creatinine levels upon admission and the G allele with lower band neu-trophils upon discharge, these findings require further investigation. The distribution of OAS gene polymorphisms (rs10774671, rs10735079 did not differ between MAFLD and non-MAFLD patients. Our study population's distribution of ACE2 rs2074192 genotypes and alleles differed from the European reference population. Overall, our findings suggest that these specific SNPs may not be major contributors to COVID-19 severity in our patient population, highlighting the potential role of other genetic factors and environmental influences.

DIEP-based breast reconstruction necessitates wide undermining at the abdominal donor-site, creating large wound areas. Flap harvesting is usually conducted using electrosurgical dissection devices. This study sought to compare the clinical outcomes in patients after using the PEAK PlasmaBlade (PPB) versus monopolar electrocautery (MPE). This retrospective cohort study included 128 patients with DIEP-based breast reconstruction. Patient characteristics as well as information on the postoperative course were collected and a comparative evaluation was conducted. The MPE group exhibited significantly (p* = 0.0324) higher abdominal drainage volume (351.11 ± 185.96 ml) compared to the PPB group (279.38 ± 183.38 ml). Subgroup analysis demonstrated that PPB significantly reduced postoperative wound fluid in patients with BMI > 30 kg/m² (p* = 0.0284), without prior neoadjuvant chemotherapy (p** = 0.0041), and among non-smokers (p = 0.0046). Furthermore, postoperative pain was significantly (p**** < 0.0001) lower in the PPB cohort. This study confirms the non-inferiority of the PEAK PlasmaBlade to conventional electrocautery for abdominal flap harvesting. The PPB demonstrated advantages, notably reduced drainage volume and lower postoperative pain levels. Recognizing patient subsets that benefit more from the PPB highlights the importance of personalized device selection based on patient characteristics.

Breast cancer is the most common cancer in women globally, often necessitating mastectomy and subsequent breast reconstruction. Silicone mammary implants (SMIs) play a pivotal role in breast reconstruction, yet their interaction with the host immune system and microbiome remains poorly understood. This study investigates the impact of SMI surface topography on host antimicrobial responses, wound proteome dynamics, and microbial colonization. Biological samples were col-lected from ten human patients undergoing breast reconstruction with SMIs. Mass spectrometry profiles were analyzed for acute and chronic wound proteomes, revealing a nuanced interplay between topography and antimicrobial respondseproteins. 16S rRNA sequencing assessed mi-crobiome dynamics, unveiling topography-specific variations in microbial composition. Surface topography alterations influenced wound proteome composition. Microbiome analysis revealed heightened diversity around rougher SMIs, emphasizing topography-dependent microbial inva-sion. In vitro experiments confirmed staphylococcal adhesion, growth, and biofilm formation on SMI surfaces, with increased texture correlating positively with bacterial colonization. This comprehensive investigation highlights the intricate interplay between SMI topography, wound proteome dynamics, and microbial transmission. The findings contribute to understanding host-microbe interactions on SMI surfaces, essential for optimizing clinical applications and minimizing complications in breast reconstruction.

A more sustainable society and economy also implies a more sustainable behavior in the consumption of financial products. A possible change in focus can come from the demand side, so that more sustainable consumption of financial products have to go hand to hand with financial literacy. However, financial literacy, potential favoring of this sustainable behavior, is far from reaching an international consensus about its definition, object and scope. Two objectives are analyzed; the different interpretations of financial literacy in the academic literature, as well as its evolution and how, in what context and with what other concepts the term is used in social networks. Scientometric techniques and content analysis have been used to carry out a systematic review of literature and also NLP to analyze the comments on Social Networks. Critical moments are identified in the definition of financial literacy. Also ten sentiments are analyzed in social networks in wich positivity, trust, and anticipation predominate. Greater attention to this issue is necessary both from the private initiative and from public policies, so that financial literacy is an effective tool for a more sustainable behavior by consumers. Finally, a new definition is proposed based on our findings.

Grafting polyethylene glycol (PEG) on polymers surface is widely used to improve biocompatibility by reducing protein and cell adhesion. Although PEG is considered to be bioinert, its incorporation to biomaterials has shown to improve cell viability depending on the amount and molecular weight (MW) used. This phenomenon was studied here by grafting PEG of three MW onto polyurethane (PU) substrata at three molar concentrations to assess their effect on PU surface properties and on the viability of osteoblasts and fibroblasts. PEG formed a covering on the substrata which increased the hydrophilicity and surface energy of PUs. Among the results it was observed that osteoblast viability increased for all MW and grafting densities of PEG employed compared with unmodified PU. However, fibroblast viability only increased at certain combinations of MW and grafting densities of PEG, suggesting an optimal level of these parameters. PEG grafting also promoted a more spread cell morphology than that exhibited by unmodified PU; nevertheless, cells became apoptotic-like as PEG MW and grafting density were increased. These effects on cells could be due to PEG affecting culture medium pH, which became more alkaline at higher MW and concentrations of PEG. Results support the hypothesis that surface energy of PU substrates can be tuned by controlling the MW and grafting density of PEG, but these parameters should be optimized to promote cell viability without inducing apoptotic-like behavior.

The strong couplings among ecological, economic, social and technological processes explains the complexification of human-made systems, and phenomena such as globalization, climate change, the increased urbanization and inequality of human societies, the power of information, and the COVID-19 syndemics. Among complexification’s essential features are non-decomposability, asynchronous behavior, components with many degrees of freedom, increased likelihood of catastrophic events, irreversibility, nonlinear phase spaces with immense combinatorial sizes, and the impossibility of long-term, detailed prediction. Sustainability for complex systems implies enough efficiency to explore and exploit their dynamic phase spaces and enough flexibility to coevolve with their environments. This in turn means solving intractable nonlinear semi-structured dynamic multi-objective optimization problems, with conflicting, incommensurable, non-cooperative objectives and purposes, under dynamic uncertainty, restricted access to materials, energy and information, and a given time horizon, aiming at enhancing the co-evolutionary power of the Biosphere and its human subsystems. Giving the high-stakes, the need for effective, efficient, diverse solutions, their local-global, present-future effects, and their unforeseen short, medium and long-term impacts, achieving sustainable complex systems implies the need for Sustainability-designed Universal Intelligent Agents, harnessing the strong functional coupling between human, artificial and nonhuman biological intelligence in a no-zero-sum game to achieve sustainability.

HLA class-I (HLA-I) polyreactive monoclonal antibodies (mAbs) reacting to all HLA-I alleles were developed by immunizing HLA-E monomeric heavy chain (HC) (Open Conformers, OCs). Two of the mAbs (TFL-006 and TFL-007) bound to the HC’s coated on a solid matrix. The binding was inhibited by a peptide 117AYDGKDY123, present in all alleles of the six HLA-I isoforms but masked by 2-microglobulin -m) in intact HLA-I trimers (Closed Conformers, CCs). Identical HLA-I polyreactivity is observed in IVIg administered to lower anti-HLA antibodies (Abs) in HLA-sensitized patients, but the mechanism is unknown. We hypothesized that the mAbs that mimic IVIg HLA-I polyreactivity might mimic the immunomodulatory functions of IVIg. We tested the relative binding affinity of the mAbs and IVIg for both OCs- and CCs and compared their effects on (a) the phytohemagglutinin (PHA)-activation T-cells, (b) the production of anti-HLA-II antibody (Ab) by B-memory cells, and anti-HLA-I Ab by immortalized B-cells, and (c) the upregulation of CD4+, CD25+, and Fox P3+ T-regs. The mAbs bound only to OCs, whereas IVIg is bound to both CCs and OCs. The mAbs suppressed blastogenesis and proliferation of PHA-activated T-cells, anti-HLA Ab production by B-cells and expanded the T-regs, better than IVIg. We conclude that a humanized version of the TFL-mAbs could be an ideal therapeutic IVIg-mimetic.

The present study aimed at investigating the in vitro and in vivo susceptibility of malaria parasites to crude extracts and fractions from Polyalthia suaveolens, Uvaria angolensis, and Monodora tenuifolia. The ethanolic extracts were prepared by maceration, and were further partitioned using water, dichloromethane, hexane, and methanol. The most promising fraction was subjected to column chromatography and the sub-fractions tested for activity in vitro. The antiplasmodial effect of extracts and fractions was tested against the Chloroquine resistant (PfK1) strain in 96 wells microtiter plate format using SYBR green florescence assay. The promising fraction was further assessed for cytotoxicity and acute toxicity in Swiss albino mice and subsequently against the rodent malaria parasite, P. berghei. Qualitative phytochemical screening was also performed on the promising fraction. The methanol fractions exerted the overall better effect with that of the twigs of P. suaveolens (PStw(Ace)) showing the highest potency with a IC50 value of 3.24 µg/mL followed by the fractions of leaf of M. tenuifolia (MoTel(Ace), IC50= 3.84 µg/ml) and stem bark of P. suaveolens (IC50= 4.90 µg/ml). The phytochemical screening showed the presence of alkaloids, lactones, and phenols in the more active fraction of P. suaveolens (PStw(Ace)). The chromatographic fractionation of this fraction led to 12 sub-fractions with PS8 sub-fraction being the most active (IC50= 4.42 µg/mL). In vivo, oral administration of 2000 mg/kg b.w of fraction PStw(Ace) in mice showed no signs of toxicity. Also, fraction PStw(Ace) at 400 mg/kg b.w exerted the highest suppressive effect against P. berghei strain B throughout the 4 days experiment (% parasitaemia below 5.2%). Overall, the results achieved supported the use of the three plants in the traditional treatment of malaria in Cameroon. More interestingly, the methanolic fraction of the twigs extract from P. suaveolens might be of interest in future development of an antimalarial phytodrug.

Recent advances in signal processing and AI-based inference enable the exploitation of communication signals to collect information on devices, people, actions and the environment in general, i.e., to perform Integrated Sensing And Communication (ISAC). This possibility opens new and exciting opportunities for IoT systems, but at the same time poses unprecedented threats to security and privacy of data, devices, and systems. In fact, ISAC operates at the PHY and Medium Access Control (MAC) layers, where it is impossible to protect the information with standard encryption techniques, or with any other purely digital methodologies. The work we present analyzes, within the framework of IoT and distributed, pervasive communication systems, the threats to security and privacy posed by ISAC and how they do intertwine at the PHY layer. Next, possible countermeasures are presented and discussed, with proper architectural choices and tradeoffs to implement them, as well as solutions and protocols to preserve the potential benefits of ISAC while ensuring data protection and users’ privacy.

The effect of doublet state metalloradical complex in a solar cell inside the common active layer poly(3-hexylthiophene)/ [6,6]-phenyl-C61-butyric acid methyl ester (P3HT/PC60BM) is explored. In this work is demonstrated that the role of the Bis-[1,3-Bis-(2,6-diisopropylphenyl)-4,5-dichloroimidazol-2-ylidene]palladium(I) hexafluoridophosphate dopant, [Pd(IPrCl)2][PF6], is crucial because, by having a stable unpaired electron in the molecule, it significantly improves the optoelectronic performance of the devices. We found the optimal concentration of this molecule in the active layer, and we demonstrated that the presence of this additive in the active layer helps to significantly improve the morphology of the device. The improvements in optoelectronic and morphological parameters are associated with a remarkable increase of photocurrent generation due to more favourable mechanisms of charge separation at the donor/acceptor (D/A) interfaces of the active layer and reduced recombinations. Moreover, the presence of this additive improves the stability of the unencapsulated solar cell against photochemical degradation produced by sunlight.

Metal halide perovskites (MHPs), in particular lead-based halide perovskites have earned a recognized fame in several fields for their outstanding optoelectronics properties including direct generation of free charge carriers, optimal ambipolar charge carrier transport properties, high absorption coefficient, point-defect tolerance, and compositional versatility. Nowadays, this class of materials represents a real and promising alternative of silica for the photovoltaic technologies. This worthy success led to a growing interest in the exploration of MHP materials in other hot research fields such as the solar-driven photocatalytic water splitting towards hydrogen production, CO2 reduction to CO and CH4, useful organic reactions such as organic synthesis (formation of C-C, C-N, and C-O bonds), and pollutants and dye degradation. Nevertheless, many of these perovskite materials showed air and moisture instability problems that considerably hinder their practical application for photocatalytic water splitting and photodegradation of CO2. Moreover, if the chemical instability is a problem that can be in part mitigated by the optimization of the lattice structure, the presence of lead represents a real problem for the practical application of these type of materials in commercial devices. To successfully overcome this problem, lead-free metal halide perovskites (LFMHPs) have gained increasing interest thanks to their promising optoelectronic properties, comparable to lead-based materials, and their eco-friendly nature. Among all the lead-free perovskite alternatives, this mini review will focus the attention on the bismuth-based perovskites and perovskite derivatives with specific focus on solar-driven photocatalysis application for H2 evolution.

Background There is increasing awareness of problems associated with global warming but a lack of a systematic approach on how to deliver more environmentally sustainable dental care. A sustainable world aims to ensure that basic needs and quality of life of everyone are met, now and for future generations. The carbon footprint is an indicator of environmental sustainability. Aim The aim is to suggest an environmental management change for the dental practice focusing on the objective of carbon footprint reduction. Environmental management change design The management change is based on the concept of “Plan-Do-Check-Act”, as recommended by the International Organisation for Standardisation (ISO) and described through the environmental aspects of the dental practice. The approach focuses on establishing and implementing environmental objectives, followed by monitoring results and taking actions to improve continually. The environmental aspects considered for the dental practice are activities causing an impact on the carbon footprint: energy use, travel, product purchasing, waste production, emission to air, water use, and contamination of land. Conclusions The “Plan-Do-Check-Act” ISO 14100-2015 model can be effectively integrated into the dental practice setting for its environmental management. A reduction of the carbon footprint of the dental practice is achieved by applying the environmental management change described for each activity.

Searching for neutrinoless double beta decay is a top priority in particle and astroparticle physics, being the most sensitive test of lepton number violation and the only suitable process to probe the Majorana nature of neutrinos. In order to increase the experimental sensitivity for this particular search, ton-scale detectors operated at nearly zero-background conditions with a few keV energy resolution are required. In this scenario, cryogenic detectors have proven effective in addressing many of these issues simultaneously. After long technical developments, the CUORE experiment established the possibility to operate large scale detectors based on this technology. Parallel studies pointed out that scintillating cryogenic detectors represent a suitable upgrade for the CUORE design, directed towards higher sensitivities. In this work, we review the recent development of cryogenic detectors, starting from the status of the art and outlying the path toward next-generation experiments.

Visible-light photocatalysis, particularly in its application to organic synthesis, has experienced a big renaissance in the past decade. The rational design of new photocatalysts with designed and improved photocatalytic properties, that at the same time circumvents the necessity of using scarce and toxic transition metals, will predictably play a key role in photocatalysis in the next few years. Although free-base porphyrins were identified some years ago as a promising, easily accessible and easily tunable class of organic photoredox catalysts, a systematic study on the effect of the electronic nature and of the position of the substituents on both the ground-state and the excited-state redox potentials of these compounds is still lacking. We have prepared a set of known functionalized derivatives of meso-tetraphenyl porphyrin containing different substituents either in one of the meso-positions or at a beta-pyrrole carbon and we have determined their ground- and (singlet) excited-state redox potentials. This survey has led us to conclude that the introduction of a carbonyl group at the beta-pyrrolic position strongly increases the facility of the monoelectronic reduction of the porphyrin both in the ground state and in the singlet excited state. We have also prepared a second set of four previously unknown benzoyl derivatives of meso-tetraphenylporphyrin, and we have confirmed the validity of our conclusions.

The majority of investigations on microbial communities from various environments are presently built on culture-independent methods. Many studies point to the pivotal, selective role of primers targeting hypervariable regions of 16S rRNA in the metabarcoding of bacteria, including cyanobacterial communities. The selectivity of primers designed to amplify targeted regions of the 16S rRNA gene, which has been highlighted by many authors, limited effective amplification. Moreover, the type and specificity of the studied material can also negatively influence the results of 16S metabarcoding. Most of the studies of cyanobacterial communities have been performed for planktonic microbial communities that are often represented by common, well-studied species. In this study, we present the results of 16S metabarcoding analysis using three primer pairs - two already well-known and a third designed in this study - that amplify divergent regions of the 16S rRNA gene (V3-V4, V4-V6, V6) for benthic, microbial mat-forming cyanobacteria communities. Such communities can be a source of toxigenic cyanobacterial taxa and should be monitored with adequate primers. The comparison of three primer pairs suggested that those designed within the present study describe the structure and composition of highly heterogeneous cyanobacterial mats’ communities better than the others

This article compares chemical coagulation with electrocoagulation, two popular methods for the primary treatment of wastewater generated in the process of Underground Coal Gasification (UCG). The primary aim was to determine which method is more effective in the removal of cyanide and sulphide ions, metals and metalloids, as well as organic compounds. In both cases, experiments were conducted in batch 1 dm³ reactors, and the coagulation/flocculation process was carried out using iron ions. Four types of coagulants were tested during the chemical coagulation study: FeCl₂, FeSO₄, Fe₂(SO₄)₃, and FeCl₃. In the electrocoagulation experiments, pure iron Armco steel was used to manufacture the sacrificial iron anode. Both processes were tested under a wide range of operating conditions (pH, time, Fe dose) to determine their maximum efficiency for treating UCG wastewater. It was found that, through electrocoagulation, a dose as low as 60 mg Fe/dm³ leads to >60% cyanide reduction and >98% sulphide removal efficiency, while for chemical coagulation, even a dose of 307 mg Fe/dm³ did not achieve more than 24% cyanide ion removal. Moreover, industrial chemical coagulants, especially when used in very high doses, can be a substantial source of cross-contamination with trace elements.

Aluminum, a contentious trace element found in the environment, has been demonstrated to have harmful effects on both humans and animals. In contrast, Sempervivum tectorum, an evergreen plant, has been found to offer numerous beneficial effects for both humans and animals. Therefore, this study aims to assess the protective effect of S. tectorum on certain reproductive biomarkers in male rats exposed to aluminum. Thirty-five Wistar rats were randomly divided into five groups: NTC (no-treatment control) received distilled water; NC (negative control) received drinking water containing 1 mg/L aluminum sulfate (AS); E1 received 1 mg/L AS along with an 8% S. tectorum extract; PC (positive control) received only 8% S. tectorum extract; E2 received 1 mg/L AS for three months followed by 8% extract for one month. The study analyzed testosterone, LH, FSH, body weight, and the histological structure of the testis, epididymis, and prostate, as well as the levels of zinc, manganese, copper, and iron in these organs. Significant decreases in body weight, testis, and epididymis size were observed in the aluminum-exposed groups compared to the control, whereas these decreases were not significant in the S. tectorum-treated groups compared to the control. Aluminum exposure led to significant decreases in testosterone and LH levels, with FSH levels showing a non-significant decrease in males, which were mitigated significantly by the administration of the plant extract. Histological analysis revealed alterations in the testis, epididymis, and prostate of the AS-exposed groups, including necrosis of seminiferous tubule epithelium and Leydig cells in the testis, and basal epithelial necrosis in the epididymis and prostate. Aluminum levels increased in all organs studied, while levels of zinc, copper, iron, and manganese decreased, showing a negative and significant correlation with aluminum levels. The aqueous extract of S. tectorum demonstrated a protective effect on certain studied biomarkers in male rats affected by aluminum exposure.