The objective of this study was to analyze the in vitro stability and toxicity of liposomes containing guarana in skin cell lines. The liposomes were produced by the reverse phase evaporation method containing 1 mg/mL guarana. The stability of the liposomes was evaluated by physical-chemical parameters for up to 90 d using three different storage conditions. The cytotoxicity of guarana (GL), liposomes (B-Lip), and guarana-loaded liposomes (G-Lip) was evaluated on spontaneously immortalized human keratinocyte cell lines (HaCaT), murine swiss albino fibroblasts (3T3), and human fibroblast (1BR.3.G). The evaluation was performed using cellular viability analysis. The techniques used were 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and neutral red capturing (NRU) and the analyses were conducted after 24, 48, and 72 h exposure of these cells to the different treatments. The G-Lip exhibited physical-chemical stability for 60 d when the samples were stored in a refrigerator. The GL, B-Lip, and G-Lip demonstrated low cytotoxicity in the three cell cultures tested since a low reduction in cell viability was only observed at the highest concentrations. In addition, greater cell damage was observed for B-Lip; however, guarana protects cells from this damage. Thus, G-Lip structures can be considered as promising systems for topical applications.

Background: Sex differences in blood pressure (BP) exist during all reproductive life between women and men whereas a sharper increase in BP occurs after menopause which is associated with increased prevalence of cardiovascular diseases. This study examined cardiovascular and biochemical parameters in perimenopausal women (PW) aiming to investigate the influence of sex on a) office BP and for 24 hours; b) cardiac autonomic modulation; c) redox state by measuring MDA, SOD, and catalase; d) NO_x^- concentration. In addition, aerobic exercise training (AET) was applied for detecting changes in cardiovascular responsiveness during the menopausal transition. Methods: Thirty-one participants were enrolled, healthy PW and age-matched men. Cardiovascular and biochemical biomarkers were evaluated at baseline and after AET (8 weeks of exercise on a treadmill, three sessions/week, duration of 30-40 minutes). Results: At rest, PW presented: a) a lower diastolic BP during daytime; b) a lower absolute and normalized LF component as well as a higher HF normalized component; d) no sex differences for redox biomarkers and NO_x^- concentration. After AET, only PW was responsive in lowering systolic BP that was accompanied by an increase in NO_x^- concentration and SOD activity. Regarding HRV, both groups were responsive to the AET. Conclusions: During the menopausal transition, systolic BP was similar to men whereas cardiac autonomic modulation remained unaltered showing the influence of sex steroids on BP. In Addition, AET was fundamental during the menopause transition by preventing an elevation in BP, minimizing the effects of aging associated with estrogen deficiency on women's cardiovascular health.

Catalytic studies for hydrogen production via steam reforming of ethanol (SRE) are essential for process optimization. Likewise, selecting the ideal support for the active phase can be critical to achieve high conversion rates during the catalytic steam reforming. In this work, copper-based catalysts were synthesized using two different supports, NaY zeolite and Nb2O5/Al2O3 mixed oxides. The materials were prepared using wet impregnation and characterized for their physicochemical properties using different analytical techniques. Differences in catalyst morphologies were readily attributed to the characteristics of the support. The Cu/NaY catalyst showed better textural properties than Cu/Nb2O5/Al2O3, resulting in a homogeneous metal dispersion over the support surface. Both catalytic systems were active in SRE, but Cu/NaY resulted in higher ethanol conversions compared to Cu/Nb2O5/Al2O3. Hence, the performance of copper-based catalysts was influenced significantly by the textural properties of the support.

The pharmaceutical industry is one of the largest pollutants and generator of toxic solvent resi-dues for the environment and human beings. In the last decade, there has been a huge evolution in the design and development of new environmentally friendly products and processes, in re-sponse to the global environmental concern and the growing demand for products with quality ingredients and manufacturing processes aimed at achieving sustainability. Consumers are looking for products with the benefits of natural products, with sustainable and environmentally friendly formulations with few synthetic molecules as possible. Thus, based on the origins of the pharmaceutical industry, it is important to return to Nature and enjoy the benefits that natural products bring to us. Deep eutectic solvents appear as an alternative to toxic solvents commonly used to extract bioactive compounds. These solvents are considered green solvents because they are made up of natural compounds such as sugars, amino acids, and carboxylic acids. In addition, they are simple to prepare, with an atomic economy of 100%, with attractive physicochemical properties. This paper is a comprehensive review in which is described the main properties, characteristics, and production methods of deep eutectic solvents as well as its application to extract from natural sources bioactive compounds with pharmaceutical interest.

A single farmed fish species assimilates about 20% of the nutrients in the supplied diet. This study evaluated if the culture of complementary ecological-function species can recover nutrients dispersed into the water and transform them into high-valued biomass. A completely randomized experiment was designed with three treatments and four replications of each production system: monoculture of lambari (Astyanax lacustris); integrated aquaculture of lambari and Amazon river prawn (Macrobrachium amazonicum); and integrated aquaculture of lambari, Amazon river prawn, and curimbatá (Prochilodus lineatus). Fingerlings of lambari (0.8 ± 0.8 g) were stocked in twelve earthen-ponds (0.015 ha) at the density of 50 fish m^-2. Eight ponds, were stocked with juveniles of Amazon river prawn (1.1 ± 0.2 g) at the density of 25 prawn m⁻². Four of these eight ponds were stocked with curimbatá fingerlings (0.2 ± 0.1 g) at a density of 13 fish m^-². Only lambari was fed twice a day with an extruded commercial diet. The experiment lasted 60 days when lambari attained commercial size. The inclusion of prawn increased the total species yield from 1.8 to 2.4 t ha^-1 cycle^-1 and reduced the feed conversion ratio (FCR) from 2.5 to 1.8. The inclusion of prawn and curimbatá increased the total yield to 3.2 t ha^-1 cycle^-1 and reduced the FCR to 1.4. Therefore, the integrated culture of lambari, prawn, and curimbatá improves the use of space, water, feed, and benthic species can recover the large quantity of nutrients accumulated in the bottom of lambari pond production, converting them into high-nutritional and monetary-valued biomass.

In bone tissue engineering, ceramics have been the choice due to their excellent biological properties. But the paradigm changed with the discovery of bioactive glasses (BGs) in 1969 by Larry Hench and co-workers, due to their ability to bond to living tissues through the formation of an interfacial bone-like hydroxyapatite layer when the bioglass was put in contact with biological fluids in vivo. Among a number of tested compositions, the one exhibiting the highest bioactivity index is the well-known trademarked 45S5 Bioglass®. The topic received increasing attention particularly after 1985 when this material entered in the market of biomedical devices, inspiring many other investigations aiming at further exploring the in vitro and in vivo performances of this BG, or developing other related BG compositions. The research efforts gradually revealed a number of shortcomings of 45S5 Bioglass®, mostly derived from its high sodium content, initially intended to decrease the melting temperature and accelerating the degradation of the silicate network over time. But the extensive release of sodium from 45S5 Bioglass® in the biological fluids creates a high pH cytotoxic environment. Other serious drawbacks include a fast degradation rate, and a poor sintering ability, which hinders the reliable fabrication of porous scaffolds. Therefore, sol-gel was regarded as an attractive alternative to prepare alkali-free BG compositions. The process uses inorganic and/or organic precursors, which undergo hydrolysis and condensation at room-temperature, being less costly. When properly conducted, the sol-gel process might result in amorphous structures with all the components intimately mixed at the atomic scale. Moreover, developing new better performing materials for bone tissue engineering is a growing concern, as the ageing of the world’s population leads to lower bone density and osteoporosis. This work describes the sol-gel synthesis of a novel quaternary silicate-based BG with the composition 60 SiO2 – 34 CaO – 4 MgO – 2 P2O5 (mol%) was prepared using acidified distilled water as single solvent. By controlling the kinetics of the hydrolysis and condensation steps, an amorphous glass structure could be obtained. The results of XRD of samples calcined within the temperature range from 600-900 ºC demonstrated that amorphous nature was maintained until 800 ºC, followed by partial crystallization at 900 ºC. The specific surface area, an important factor in osteoconduction, was also evaluated over different temperatures, ranging from 160.6 ± 0.8 m2/g at 600 ºC down to 2.2 ± 0.1 m2/g at 900 ºC, being accompanied consistent changes in average pore size and agreeing pore size distribution. The immersion of the BG particles in simulated body fluid (SBF) led to the formation of an extensive apatite layer on its surface. These overall results indicate the proposed material is very promising for biomedical applications in bone regeneration and tissue engineering.

Glucagon-like peptide-1 (GLP-1) and glucose-dependent insulinotropic polypeptide (GIP) are secreted from the gut upon nutrient stimulation and regulate postprandial metabolism. These hormones are known as classical incretin hormones and are responsible for a major part of postprandial insulin release. The incretin effect is severely reduced in patients with type 2 diabetes, but it was discovered that administration of GLP-1 agonists was capable of normalizing glucose control in these patients. Over the last decades, much research has been focused on the development of incretin-based therapies for type 2 diabetes. These therapies include incretin receptor agonists and inhibitors of the incretin-degrading enzyme dipeptidyl peptidase-4. Especially the development of diverse GLP-1 receptor agonists has shown immense success, whereas studies of GIP monotherapy in patients with type 2 diabetes have consistently been disappointing. Interestingly, both GIP-GLP-1 co-agonists and GIP receptor antagonists administered in combination with GLP-1R agonists appear to be efficient with respect to both weight loss and control of diabetes, although the molecular mechanisms behind these effects remain unknown. This review describes our current knowledge of the two incretin hormones and the development of incretin-based therapies for treatment of type 2 diabetes.

Background: Heart rate variability is a non-invasive, measurable, and established autonomic nervous system test. Long-term COVID-19 sequelae are unclear; however, acute symptoms have been studied. Objectives: To determine autonomic cardiac differences between long COVID-19 patients and heathy controls and evaluate associations among symptoms, comorbidities, and laboratory findings. Methods: This single-center study included long COVID-19 patients and healthy controls. The heart rate variability (HRV), a quantitative marker of autonomic activity, was monitored for 24 h using an ambulatory electrocardiogram system. HRV indices were compared between case and control groups. Symptom frequency and inflammatory markers were evaluated. The significance level of 5% (p-value 0.05) was adopted. Results: A total of 47 long COVID-19 patients were compared to 42 healthy controls. Patients averaged 43.8 (SD14.8) years old, and 60.3% were female. In total, 52.5% of patients had moderate illness. Post-exercise dyspnea was most common (71.6%), and 53.2% lacked comorbidities. COVID-19 patients had 4 times more dyslipidemia. CNP, D-dimer, and CRP levels were elevated (p-values of 0.0098, 0.0023, and 0.0015, respectively). The control group had greater SDNN24 and SDANNI (OR = 0.98 (0.97 to 0.99; p = 0.01)). Increased low-frequency (LF) indices in COVID-19 patients (OR = 1.002 (1.0001 to 1.004; p = 0.030)) and high-frequency (HF) indices in the control group (OR = 0.987 (0.98 to 0.995; p = 0.001)) were also associated. Conclusions: Patients with long COVID-19 had lower HF values than healthy individuals. These variations are associated with increased parasympathetic activity, which may be related to long COVID-19 symptoms and inflammatory laboratory findings.

(1) Background: The severity of malaria is associated with low bioavailability of antioxidants and high concentration of free radicals that induce oxidative damage in cerebral and pulmonary microcirculation. This can be prevented by the action of consumable antioxidants present in foods. Therefore, we investigated the protective role of lycopene (LYC) on the oxidative changes induced by Plasmodium berghei (Pb); (2) Methods: Mice were infected by intraperitoneal injection of 106 parasitized red blood cells and treated via gavage with LYC (3.11 mg/kg bw/day) or NAC (62 mg/kg bw/day). They were then evaluated for 1, 4, 8 or 12 days after infection. Levels of thiobarbituric acid reactive substances (TBARS), antioxidant capacity by inhibition of ABTS radicals (AC-ABTS) and DPPH (AC-DPPH), uric acid (UA), and nitric oxide (NO) were measured in brain and lung tissues; (3) Results: The infection caused oxidative stress confirmed by increased levels of TBARS, AC-ABTS, AC-DPPH, UA, and NO in the tissues leading to the death of the animals. LYC prevented the increase in TBARS, AU, and NO levels compared to Pb (p< 0.0001) and NAC+Pb groups (p<0.0001), reaching values similar to those of Sham animals; (4) Conclusions: These results are striking evidence of the beneficial effect of lycopene supplementation on oxidative stress in experimental malaria in vivo and emphasize the importance of antioxidant supplementation in the treatment of the disease.

Glioblastoma (GBM) is the most lethal form of brain tumor, characterized by rapid growth and surrounding tissue invasion. The current standard treatment is surgery followed by radiotherapy, and concurrent chemotherapy, typically with temozolomide. Although extensive research has been performed over the past years to develop an effective therapeutic strategy for the treatment of GBM, efforts have not provided major improvements in the overall survival of patients with GBM. Thus, new therapeutic approaches are urgently needed. A major challenge in the development of therapies for central nervous system (CNS) disorders is overcoming the blood–brain barrier (BBB). In this context, the intranasal (IN) route of drug administration has been proposed as a non-invasive alternative route to directly targeting the CNS. In fact, this route of drug administration may bypass the blood-brain barrier and reduce systemic side effects. Recently, formulations have been developed to further enhance nose-to-brain transport, mainly with the use of nano-sized and nanostructured drug delivery systems. The focus of this review will be on the strategies developed to deliver a number of anticancer compounds for the treatment of GBM using the nasal administration. In particular, the specific properties of nanomedicines proposed for the nose-to-brain delivery will be critically evaluated. The number of preclinical and clinical data reviewed support the idea that nasal delivery of anticancer drugs might represent a breakthrough advancement in the fight against GBM.

The main objective of this research was to analyze the relationship between socioeconomic and demographic indicators and the level of transparency of municipalities in the state of Maranhão. The transparency index was constructed based on the LRF and LAI and consisted of 32 items. Subsequently , for To identify which factors explain the level of transparency, a multiple linear regression was carried out, comparing the explanatory variables for the level of transparency adopted in this study. The sample consisted of municipalities in the State of Maranhão, totaling 211 municipalities, as 7 did not have a website. The results of the multiple linear regression model indicate that the IDHM, the log of total GDP, the GDP per capita and the variable log of POP explain the NT of the municipalities surveyed to the point of explain the level of transparency of the municipalities of Maranhão, only the IFDM did not show a relationship with the NT among the variables analyzed.

Subnational governments play a key role responding to climate change risks in terms of policy strategies and instruments. This article analyzes how Brazilian municipal and state governments have developed and implemented public policies to mitigate and to adapt to climate change risks. We surveyed all cities’ and states’ climate policies within the country. The methodological approach includes five main points of analysis: 1. mitigation targets and intentions; 2. adaptation actions; 3. stakeholders’ participation; 4. policy implementation; 5. participation in networks related to climate change. Our results suggest that even though subnational climate policies in Brazil are isolated initiatives within the national context, they play an important role responding to climate change risks in different scales and levels. The strongest Brazilian policies with both mitigation and adaptation actions counted on previous mobilization for the climate issue involving different stakeholders from several segments of the society. These governments have also participated in transnational cooperation networks related to climate change.

This work aims to investigate the effect of process temperature and catalyst content by pyrolysis and thermal catalytic cracking of (organic matter + paper) fraction from municipal household solid waste (MHSW) on the yields of reaction products (bio-oil, bio-char, H2O, and gas), acid value and chemical composition of bio-oils, and characterization of bio-chars, in laboratory scale. The collecting sectors of MHSW in the municipality of Belém-Pará-Brazil were chosen based on geographic and socio-economic database. The MHSW collected and transported to the segregation area. The gravimetric analysis of MHSW carried out and the fractions (Paper, Cardboard, Tetra Pack, Hard Plastic, Soft Plastic, Metal, Glass, Organic Matter, and Inert) separated. The selected organic matter and paper submitted to pre-treatment of crushing, drying, and sieving. The experiments carried out at 400, 450, and 475 °C and 1.0 atmosphere, and at 475 °C and 1.0 atmosphere, using 5.0, 10.0, and 15.0% (wt.) Ca(OH)2, in batch mode. The bio-oil characterized for acid value. The chemical functions present in bio-oil identified by FT-IR and the composition by GC-MS. The bio-char characterized by SEM, FT-IR and XRD. The variance in mass (wt.%) for organic fraction of municipal household solid waste, between 56.21 and 67.45% (wt.), lies with the interval of 56% (wt.) and 64% (wt.) of OFMHSW for middle and low income countries. The pyrolysis of MHSW fraction (organic matter + paper) show bio-oil yields between 2.63 and 9.41% (wt.), aqueous phase yields between 28.58 and 35.08% (wt.), solid phase yields between 35.29 and 45.75% (wt.), and gas yields between 16.54 and 26.72% (wt.). The bio-oil yield increases with pyrolysis temperature. For the catalytic cracking, the bio-oil and gas yields increase slightly with CaO content, while that of bio-char decreases, and the H2O phase remains constant. The GC-MS of liquid reaction products identified the presence of hydrocarbons (alkanes, alkenes, alkynes, cycloalkanes, and aromatics) and oxygenates (carboxylic acids, ketones, esters, alcohols, phenols, and aldehydes), as well as compounds containing nitrogen, including amides and amines. The acidity of bio-oil decreases with increasing process temperature and with aid Ca(OH)2 as catalyst. The concentration of hydrocarbons in bio-oil increases with increasing Ca(OH)2-to-MHSW fraction ratio due to the catalytic deoxygenation of fatty acids molecules, by means of de-carboxylation/de-carbonylation, producing aliphatic and aromatic hydrocarbons.

Foot-and-mouth disease virus (FMDV) causes the highly contagious foot-and-mouth disease, which is characterized by the appearance of vesicles in and around the mouth and feet of cloven-hoofed animals. BHK21 cells are the cell line of choice for the propagation of FMDV for vaccine production world-wide but vary in their susceptibility for different FMDV strains. Previous studies showed that the FMDV resistance of a certain BHK cell line can be overcome by using a closely related but permissive cell line for the pre-adaptation of the virus, but the adapted strains were found to harbor several capsid mutations. In this study, these adaptive mutations were introduced into the original Asia-1 Shamir isolate individually or in combination to create a panel of 17 Asia-1 mutants by reverse genetics and examine the effects of the mutations on receptor usage, viral growth, immunogenicity and stability. A single amino acid exchange from glutamic acid to lysine at position 202 in VP1 turned out to be of major importance for productive infection of the suspension cell line BHK-2P. In consequence, two traditionally passage-derived strains and two recombinant viruses with a minimum set of mutations were tested in vivo. While the passaged-derived viruses showed a reduced particle stability, the genetically modified viruses were more stable but did not confer a protective immune response against the original virus isolate.

The ceramic sherds from approximately 20 samples of lead-glazed tableware, recovered from diverse archaeological sites, including three repurposed storage pits transformed into dumpsters within the medieval city of Santarém (13th-14th century), underwent a meticulous examination. This investigation utilized techniques such as micro-Raman, ground state diffuse reflectance absorption, and X-ray fluorescence spectroscopies, in addition to X-ray diffraction and stereomicroscopy. A parallel study was conducted on contemporaneous European ceramics (glazed sherds) sourced from archaeological sites dating back to the 13th-15th centuries in Saintonge (France), Ardenne, Zomergem, and Bruges (Belgium), as well as Surrey-Hampshire, Kingston, and Cheam (England). The colour of the ceramic bodies is predominantly white or whitish, with a few exhibiting a vivid red hue. Ceramic sherds with a light paste composition were likely crafted using kaolin clays as raw materials. Analyses of fabric, mineralogical, and elemental composition of the sherds suggest that the majority of Santarém's glazed ceramics were locally or regionally produced, potentially derived from a Pliocene kaolin-rich sand formation. However, this conclusion is not supported by the absence of discovered lead glaze kilns or workshops in Santarém for the late Middle Ages. A distinctive feature from the European workshop ceramics lies in the quartz temper content and fabric.

In this study, the decision-making process management of forest tending in the forestry business is decentralized, and forest tending decision-making activities at different points in time are integrated by decision makers at different geographical locations. The decision-making process was analyzed and optimized from a system perspective. Based on the optimized decision-making process, a forest tending business group decision support system (FTGDSS) was established. We first reviewed and discussed the characteristics and development of the forest tending business and forestry decision support system. Business Process Modeling Notation was used to draw a current state flow chart of the forest tending business, to identify and discover important decision points in the process of tending decision-making. We also analyzed the content and attributes of each decision point, and described the system structure, functional framework, knowledge base structure, and reasoning algorithm of FTGDSS in detail. Finally, FTGDSS was evaluated from the two dimensions of the technology adoption model. FTGDSS integrates different levels of time-space decision-making activities, historical tending data, business plans, decision-makers' management tendencies into the decision-making process and automatically extracts decision-making data from the forest business process management enterprise resource planning system (Smartforest) that improves the ease of use of the decision support system (DSS). It also improves the quality of forest tending decisions, and enables the DSS to better support multi-target management strategies.

In this working paper we intended to address the emergence of what, potentially, will be a central concept in the very near future, Society 5.0 and that arises politically in (with) following the implementation of the concept of Industry 4.0. Society 5.0 proposes to deepen the potential of the individual-technology relationship in the promotion of the improvement of the quality of life of all people through a super smart society, is an extremely recent concept as a guiding social development that can have a profound impact in societies at all levels, such as quality of life and sustainability. It is a presentation that is based on very recent3 publications, but which also has a prospective component, which always generates some indetermination and uncertainty. Also, for this reason, it is a contribution that seeks above all else to contribute to this very urgent and necessary discussion.

This paper presents a study on the influence of the frequency variation of a nonlinear1 control allocation technique execution, developed by the author [1], named by Fast Control2 Allocation (FCA) for the Quadrotor Tilt-Rotor (QTR) aircraft. Then, through Software In The3 Loop (SITL) simulation, the proposed work considers the use of Gazebo, QGroundControl, and4 Matlab applications, where different frequencies of the FCA can be implemented separated in5 Matlab, always analyzing the QTR stability conditions from the virtual environment performed in6 Gazebo. TheresultsshowedthattheFCAneedsatleast200HzoffrequencyfortheQTRsafeflight7 conditions, i. e., 2 times smaller than the main control loop frequency, 400 Hz. Lower frequencies8 than this one would case instability or crashes during the QTR Operation.

This article aims to understand the domains and conceptual uses of contagion, its modalities and its effects, in its different historical contexts and meanings, as an expression of the process of interdependence between the positions and the different points of view of different actors involved in multiple scientific, moral, social and political challenges. Another objective focuses on understanding the process of collective management of contagion, disease and health, where prevention is an essential element of its objectives and justifications, its discursive order, as well as its practical activities.

The pre-emergent herbicide indaziflam is efficient in the management of weeds in eucalyptus crops, but this plant may develop less in soil contaminated with it. The objective was to evaluate the levels of chlorophylls a and b, the apparent electron transport rate (ETR), growth and dry matter of leaves, stems and roots of Clone I144, in clayey soil, contaminated with the herbicide indaziflam and the leaching potential of this herbicide. The design was completely randomized in a 3 x 5 factorial scheme, with four replications. Chlorophyll a and b contents, apparent electron transport rate (ETR), height growth and dry matter of leaves, stems and roots of Clone I144 were evaluated. The leaching of indaziflam in the clayey soil profile (69% clay) was evaluated in a bioassay with Sorghum bicolor, a plant with high sensitivity to this herbicide. The visual intoxication and height of this plant were evaluated at 28 days after sowing (DAS). Chlorophyll a and b contents and ETR, height and stem dry matter of Clone I144 were lower in soil contaminated with indaziflam residues. The dose of indaziflam, necessary to cause 50% (C50) of intoxication and the lowest height of sorghum plants, was 4.65 and 1.71 g ha-1 and 0.40 and 0.27 g ha-1 in clayey soil and sand, respectively. The sorption ratio (SR) of this herbicide was 10.65 in clayey soil. The herbicide indaziflam leached up to 30 cm depth at doses of 37.5 and 75 g ha-1 and its residue in the soil reduced the levels of chlorophylls a and b, the apparent electron transport rate (ETR) and the growth of Clone I144.

Sociology and History as consolidated scientific and academic projects have maintained a peculiar and paradoxical relationship. The growing disciplinary and subdisciplinary specialization of these two sciences poses relevant epistemological and methodological challenges to face potential situations of isolation, fragmentation and enable the apology of an interdisciplinary perspective characterized by the historicity of social structures, actions and senses.Several types of reasons shape this diffuse process of approach/distinction between Sociology and History, namely, epistemological and methodological, disciplinary closure, academic, professional, configuring what can be called contained dialogues. This paper, starting from the sociological perspective of the authors, seeks to contribute to the reflection on the relevance of a scientific project aimed at affirming an interdisciplinary perspective that may foster the heuristic potentialities of both Sociology and History in the analysis of the complexity of social reality and human action.

The ceramic pastes of ca. 31 samples recovered from the Almaraz archaeological site, located in the south bench of Tagus River, were studied in detail using XRF, micro-Raman and GSDR spectroscopies, as well as the XRD technique. The ceramic sherds could be grouped into six categories, Red Slip tableware, Decorated tableware, Yellow Slip tableware, Grey tableware, Common tableware and Handmade pottery. Our studies of the mineralogic composition of the sherds` body indicate that all ceramics were produced locally, using silicious clays in most cases and calcareous clays in a few ones. Micro-Raman and ground state diffuse reflectance absorption spectroscopy provided useful information regarding the materials used to produce the coloured ceramics: hematite and brookite for the red slip and decorated ceramics, jacobsite or carbon black for the black decoration or grey ceramics. For the yellow slip tableware a simple engobe rich in yellow clay was used. XRF spectroscopic studies provided the elemental composition of all samples, and biplots of the Potassium (K) versus Calcium (Ca) contents, normalized to the silicon content of each ceramic paste, clearly show that Pliocene and Miocene local clays sources were used to produce most ceramics. Only one sherd can be considered a Lisbon production.

Shot peening is an attractive technique for fatigue enhanced performance of metallic components, because it promotes crack initiation retardation and later crack growth. Engineering design based on fatigue crack propagation predictions applying the principles of fracture mechanics is commonly used in aluminum structures for aerospace engineering. The main purpose of present work was to analyze the effect of shot peening on the fatigue crack propagation of the 7475 aluminum alloy, under both constant amplitude loading and periodical overload blocks. The tests were performed on 4 and 8 mm thickness specimen's with stress ratios of 0.05 and 0.4. The analysis of the shot-peened surface showed a small increase of the micro-hardness values, due to the plastic deformations imposed by shot peening. The beneficial effect of surface peening on fatigue crack growth rates is quite limited to an increasing near the threshold. The specimens’ thickness has only marginal influence on the crack propagation, in opposite to the stress ratio. Periodic overload blocks of 300 cycles promotes a reduction of the fatigue crack growth rate for both intervals of 7,500 and 15,000 cycles.

Bone is a dynamic tissue with the capacity of repair and regeneration in specific conditions. Nevertheless, due to the increased incidence of bone disorders, the need of bone grafts has been growing over the past decades and the development of an ideal bone graft with optimal properties remains a clinical challenge. This review addresses the bone properties (morphology, composition and their repair and regeneration capacity) and puts the main focus on the potential strategies for developing bone repair and regeneration materials. It describes the requirements for designing a suitable scaffold material, types of materials (polymers, ceramics and composites) and techniques to obtain the porous structures (additive manufacturing techniques/robocasting or derived from marine skeletons) for bone tissue engineering applications. The main objective of this review is to gather the knowledge on the materials and methods for the production of scaffolds for bone tissue engineering and highlighting the potential of natural porous structures such as marine skeletons as promising alternative bone graft substitute materials without any further mineralogical changes, or after partial or total transformation into calcium phosphate. The suitability of the marine-derived porous bone graft substitutes for the intended applications will be also discussed.

In this paper any superalgebra is generalized to a new form, namely ultra algebra. We study some algebraic structure results for ultra algebras and we have defined some maps on ultra algebras to know ultra derivation and Jordan ultra derivation. Moreover on certain assumptions we have proved that Jordan ultra derivation is an ultra derivation.

A number of third order nonlinear processes can occur in single-mode fibres and an understanding of such phenomena is almost a prerequisite for actual lightwave-system designers. In this paper we review the main limitations imposed by several nonlinear effects, namely the self- and cross-phase modulation, four-wave mixing, stimulated Raman scattering and stimulated Brillouin scattering, on the performance of optical fiber communication systems.

Pragmatic trials aim to assess intervention efficacy in usual patient care settings, contrasting with explanatory trials conducted under controlled conditions. In aging research, pragmatic trials are important designs for obtaining real-world evidence in elderly populations, which are often underrepresented in trials. In this review, we discuss statistical considerations from a frequentist approach for the design and analysis of pragmatic trials. When choosing the dependent variable, it is essential to use an outcome that is highly relevant to usual medical care while also providing sufficient statistical power. Besides traditionally used binary outcomes, ordinal outcomes can provide pragmatic answers with gains in statistical power. Cluster randomization requires careful consideration of sample size calculation and analysis methods, especially regarding missing data and outcome variables. Mixed effects models and generalized estimating equations (GEEs) are recommended for analysis to account for center effects, with tools available for sample size estimation. Multi-arm studies pose challenges in sample size calculation, requiring adjustment for design effects and consideration of multiple comparison correction methods. Secondary analyses are common but require caution due to the risk of reduced statistical power and false-discovery rates. Safety data collection methods should balance pragmatism and data quality. Overall, understanding statistical considerations is crucial for designing rigorous pragmatic trials that evaluate interventions in elderly populations under real-world conditions. In conclusion, this review focuses on various statistical topics of interest to those designing a pragmatic clinical trial, with consideration of aspects of relevance in the aging research field.

“Minas Frescal” cheese is a high moisture product, subject to the proliferation of several microorganisms. Essential oils are natural antimicrobial alternatives that can increase the quality of dairy products. This study aimed to analyze the antimicrobial action of oregano (Origanum vulgare) and rosemary (Rosmarinus officinalis) essential oils against Escherichia coli and Staphylococcus aureus. An antimicrobial test by diffusion and microdilution was performed to calculate the MIC (Minimum Inhibitory Concentration) and MBC (Minimum Bactericidal Concentration). The behavior of E. coli in “Minas Frescal” cheese added with oregano oil was evaluated. The MIC of oregano oil was 0.25% against E. coli and 1% against S. aureus. For rosemary essential oil, the MIC was 8% of against E. coli. There was no activity of rosemary oil against S. aureus. The MBC observed for oregano essential oil was 1% and 0.25% respectively for S. aureus and E. coli. Bacterial analysis during cheese storage with E. coli indicated inhibition of microorganisms by oregano essential oil at a concentration of 0.25%. No alterations were observed regards to physical-chemical attributes. The use of essential oil as an antimicrobial agent has potential for industrial use, and type of microorganism, oil and sensory reflexes in the product must be observed.

In recent decades, many attempts have been made to automate the entire welding process, how-ever, there remain many non-automated welding operations that present a constant hazard to workers. This article presents an automated welding solution with collaborative robots, with this contribution, we intend to help companies in this sector increase productivity, improve quality, effectively reduce costs, and improve working conditions.

International basins are divided into sub-basins that are managed at the national and local levels, within the territory of each country, before reaching the level of international concern. The management of international basins could be developed using an integrated water management, based on multi-level governance model in which many actors are involved, from local to international scale. However, in the La Plata River Basin this model is not working, even with international agreements such as the La Plata Basin Treaty, which was signed in 1969. The understanding of political interests behind the law helps to explain its inefficiency. Therefore, considering the lack of a systemic view in an international watershed, it could be possible to have accumulating effects caused by the transformations of watercourses in the sub-basins. Then, the 2014 water crisis in the State of São Paulo, Brazil, is an example of the possible consequences arising from the lack of an integrated water management in the La Plata River Basin. Finally, this article demonstrates that the only way to have water resources utilization efficiency in an international basin is considering it as an integrated ecosystem, in order that any local problem may affect the whole basin.

High concentrations of Na⁺ or [Co(NH₃)₆]³⁺ can induce the B to Z conformational transition in alternating (dC-dG) oligo and polynucleotides. The use of short DNA oligomers (dC-dG)₄ and (dm⁵C-dG)₄ as models can allow a thermodynamic characterization of the transition. Both form right handed double helical structures (B-DNA) in standard phosphate buffer with 115 mM Na⁺ at 25 ^oC. However, at 2.0 M Na⁺ or 200 mM [Co(NH₃)₆]³⁺, (dm⁵C-dG)₄ assumes a left handed double helical structure (Z-DNA) while the unmethylated (dC-dG)₄ analogue remains right handed under those conditions. We have previously demonstrated that the enthalpy of the transition at 25 ^oC for either inducer can be determined using isothermal titration calorimetry (ITC) [Ferreira, J. M. & Sheardy, R. D., Biophys. J. 2006, 91, 1–7]. Here, ITC is used to investigate the linkages between temperature, water activity and DNA conformation. We found that the determined enthalpy for each titration varied linearly with temperature allowing determination of the heat capacity change (DC_p) between the initial and final states. As expected, the DC_p values were dependent upon the cation (i.e. Na⁺ vs [Co(NH₃)₆]³⁺) as well as the sequence of the DNA oligomer (i. e., methylated vs unmethylated). Osmotic stress experiments were carried out to determine the gain or loss of water by the oligomer induced by the titration. The results are discussed in terms of solvent accessible surface areas, electrostatic interactions and the role of water.

This study takes as a starting point the importance and dependence of the media (Ball-Rokeach & DeFleur, 1976) to obtain information about the pandemic. The dependency theory of the media system was developed in the 1970s when mass media were the dominant source of information. Today, at a time when media choices have become abundant, studies are needed to understand the phenomenon of media dependence in light of new dimensions made important by the transformations that have taken place in the social and media fields - where the coexistence of mass media with social media platforms stands out. As large-scale crises rarely occur and the media environment changes rapidly, it is important to analyze how media dependence relates to choose and trust in different media (traditional media vs. social media) in times of crisis. Several questions arise. What is the trust attributed by individuals to social media as sources of information about the COVID-19? How well informed are the individuals who choose these sources as the main sources of information? From a questionnaire administered to 240 individuals in Portugal, during the first week of the state of emergency (March 2020), this research seeks to identify how people gained access to information about the COVID-19, how they acted critically towards the various sources and how they assess the reliability of different media. Finally, it analyzes the association between the type of medium chosen and adherence to misinformation content about the virus. The results reveal the existence of a phenomenon of dependence on the media, with a strong exposure (both active and accidental) to informative content, with conventional media being privileged as the main source, and positively distinguished in terms of confidence. Finally, a statistically significant association of a positive sign was identified between the use of social media as the main source and the acceptance of misinformation.

The primary sources of particulate matter are linked to human activity. Certain particulate emissions, particularly those of a finer nature, can significantly impact human health, making them one of the most concerning pollutants. Ultrafine particles (UFP), which have a diameter of less than 100 nm, are of particular concern due to their impact on human health and the difficulty in controlling them. The concentration of ultrafine particles (UFP) in the workplace is a growing concern and is classified as an emerging risk. Workers may be exposed to UFP through inhalation, skin absorption, ingestion, or a combination of these routes. This study aims to determine the levels of UFP exposure among workers in environments with varying direct particle emission patterns. Measurements were conducted to compare the results with the levels recommended by the WHO. The study monitored industrial workplaces with direct particulate matter emissions, such as a carpentry and a bakery, as well as social sector sites without or almost without direct particle emissions, such as a school and a health clinic. One conclusion drawn from this study is that all tasks and occupations are susceptible to high levels of UFP, exceeding WHO recommended values in virtually all monitored environments. Therefore, monitoring and controlling UFP is crucial. Further in-depth studies on this subject are also necessary..

The establishment of thresholds is integral to environmental management. This paper introduces the use of thresholds in the context of deep-seabed mining, a nascent industry for which an exploitation regime of regulations, standards and guidelines is still in the process of being developed, and for which the roles and values of thresholds have yet to be finalised. There are several options for integrating thresholds into the International Seabed Authority’s regulatory regime, from being stipulated in regulations to being part of a mining contract, each option having its own advantages and disadvantages. Here we explore the range of ways that thresholds can be derived, set out the challenges in translating ecological and management data into thresholds, highlight factors for acceptance and operationalisation of thresholds in deep-seabed mining, and explain the necessity of refining thresholds as knowledge on impacts to features improves. Some comparable marine industries already use thresholds and these could potentially be used as starting points for the development of thresholds for deep-seabed mining. In order to be acceptable to the wide range of deep-seabed mining stakeholders, thresholds need to strike a balance among levels of harm acceptable by society, levels of environmental precaution justifiable by governments, scientific robustness, and operational practicality.

Introduction: Sarcopenia, muscle loss, often coexists with MASLD, a common liver disorder, which is more prevalent in those with sarcopenia. Sarcopenia also increases the risk of liver conditions like steatosis and fibrosis. Studies on sarcopenia in MASLD are common in developed countries, but fewer follow the EWGSOP2 guidelines in Brazil. Aim: to assess sarcopenia prevalence in MASLD patients. Methods: Cross-sectional study conducted at the Gastroen-terology/Hepatology Service of ISCMPA with patients diagnosed with MASLD. The EWGSOP2 criteria were used to evaluate sarcopenia. Categorical data presented as absolute and relative frequency; parametric continuous data ex-pressed as mean±standard deviation; non-parametric continuous data as me-dian and IQR. Gender differences in were analyzed using Fisher's Exact Test or Chi-squared tests, and for continuous variables, T Student tests (parametric) and Mann-Whitney U tests for independent samples (non-parametric). The significance level was set at 5% (p<0.05). Results: The study involved 103 MASLD patients with an average age of 60.39 years, comprising 48 (46.60%) adults and 55 (53.40%) older individuals. Concerning sarcopenia diagnosis, four individuals exhibited decreased muscle strength; two had reduced MME (sarcopenia); and one showed decreased walking speed (severe sarcopenia). Among the participants, 63 (60.6%) were physically active. 35 (62.5%) had mild to moderate steatosis, while 21 (37.5%) had severe steatosis. In terms of EHNA, 13 subjects (24.08%) had moderate to severe EHNA. Regarding fibrosis classi-fication, 68 (72.34%) individuals had undetermined or high probability based on the NAFLD score, with higher prevalence in males (n=23; 88.5%). Fibrosis assessment via liver biopsy revealed 27 (28.72%) in F1 and F2 and 15 (16.96%) in F3 and F4. Stratification of fibrosis into F3 and F4 was more com-mon among men (n=9; 47.4%). Conclusion: Most of the population was physi-cally active. The parameters indicating sarcopenia exceeded the thresholds recommended by EWGSOP2. The prevalence of sarcopenia was low in individuals with MASLD.

Mannosylerythritol lipids (MELs), one of the most promising biosurfactants (BS), are glycolipids produced by yeasts or fungi, with great environmental performance and a high compatibility with the human body. MELs besides working as typical surfactants, can form diverse structures when in the critical aggregation concentration (CAC), reducing the surface tension of water and other solutions, and being stable over a wide range of conditions. Among others, MELs present anti-microbial, antitumor, antioxidant and anti-inflammatory activity, skin and hair repair capacity, which opens possibilities for their use in applications from cosmetics and pharmaceutics to bio-remediation and agriculture. However, their market share is still low when compared to other glycolipids, due to their less developed production process and higher production cost. This re-view gathers information on the potential applications of MELs mentioned on the literature since 1993. Furthermore, it is also explored the current strategies being developed to enhance the market presence of MELs, in parallel with the ones developed for rhamnolipids and sophorolipids.

Background: Perioperative complications after parotidectomy are poorly studied and have a potential impact on hospitalization stay. The Clavien-Dindo classification of postoperative complications used in visceral surgery allows a recording of all complications, including a grading scale related to the severity of complication. Methods: The cohort analyzed for perioperative complications is composed of 436 parotidectomies. classified into three types, four groups and three classes depending on extent of parotid resection, inclusion of additional procedures and pathology, respectively. Results: Using the Clavien-Dindo classification, complications were reported in 77 % of the interventions. In 438 complications, 430 (98.2%) were classified as minor (332 grade I and 98 grade II) and 8 (1.8%) were classified as major (grade III). Independent variables affecting the risk of perioperative complications were duration of surgery (odds ratio = 1.007, p-value = 0.029) and extent of parotidectomy (odds ratio = 4.043, p-value = 0.007). Total/subtotal parotidectomy was associated with an increased risk of grade II-III complications [odds ratio = 2.866 (95% CI: 1.307-6.283), p-value = 0.009]. Hospital stay increased in patients with complications (p= 0.0064). Conclusions: Use of Clavien-Dindo classification shows that parotidectomy is followed by a high rate of perioperative complications. Longer hospital stay is observed in patients with perioperative complications. Almost all complications are minor and have limited consequence on hospital stay.

COVID-19 is a well-known respiratory disease spreading worldwide since January 2020, causing many deaths and massive pressure on health systems. This pandemic’s appearance compromised the health services’ sustainability and quality as many procedures were postponed or even canceled out, with an expected increase of adverse events like nosocomial infections, in-hospital deaths, and the worsening of the patients’ clinical status. Therefore, assessing whether the healthcare providers’ performance has changed is paramount. In this case, we evaluated the public hospitals in Portugal as the leading secondary health care providers in the country, which in turn has been highly affected by the pandemic. To this end, we developed a network Data Envelopment Analysis model serially relating efficiency and effectiveness. Using 2,795 observations from public hospitals and 18 variables, we observed consistent drops in efficiency when the pandemic started, followed by a recovery to levels above the pre-pandemic ones. Regarding effectiveness, we observed a positive trend during the evaluated period. In short, these results allow us to conclude that, apart from the great resilience of public healthcare providers, the Portuguese State was not prepared for a pandemic like COVID-19, but still the actions taken (including massive vaccination) were beneficial.

This research work uses a simplified approach to combine location information from beacons propagation signal interaction with a mobile device with local building information to give real-time location and guidance to a user inside a building. This is an interactive process with visualisation information that can help user’s orientation inside unknown buildings and the data stored from different users can provide useful information about users movements inside a public building. Beacons installed on the building at specific pre-defined position emit signals that give a geographic position with an associated imprecision, related with Bluetooth’s range. This uncertainty is handled by building layout and users’ movement in a developed system that maps users’ position, gives guidance and store user movements. This system is based on an App (Find Me!) for Android OS (Operating System) which captures the Bluetooth Low Energy (BLE) signal coming from the beacon(s) and shows, through a map, the location of the user ‘s smartphone and guide him to the desired destination. Also, the beacons can deliver relevant context information. The application was tested by a panel of new and habitual campus users against traditional wayfinding alternatives yielding navigation times about 30% smaller, respectively.

The concept of innovation ecosystems brings to light a whole set of stakeholders that face the entire set of barriers to making new technologies change people´s lives. This research aimed to understand and analyze the innovation ecosystem in organic and agroecological production in the Federal District, Brazil, and its directly influenced area. A questionnaire was applied to 27 institutions identified as the backbone of the innovation ecosystem. The Gephi 0.10.1 software and the Force Atlas 2 network algorithm set up the relationship network. We verified a certain misalignment between expected roles and functions performed by 66% of the stakeholders. Low integration and dispersed relationships in the network were observed with a misalignment around the innovation concept in organic food production. This arrangement of the ecosystem is compatible with the initial stage, in which stakeholders and resources would be spread out and demobilized. Although shared governance is the most effective for an innovation ecosystem, the analyzed ecosystem demands centralized governance with a leading organization. Strengthening strategies were proposed to (i) define leadership, (ii) define roles or competencies, and (iii) strengthen community attributes.

As part of a project ordered by the Ministry of Science, Technology and Innovation of Brazil, an assessment of Brazilian biological collections was conducted by the Brazilian Societies of Botany, Microbiology, Virology and Zoology to obtain data on the current state of these collections. The goal was to provide subsidies for future public policies, including financial support and prioritization policies. Herein, we present the results of the microbiological collections, which play a fundamental role in the ex situ conservation of biodiversity and support research, development and innovation. A survey was sent to public and private institutions in Brazil and answered by 168 microbiological collections from 79 different institutions. Among these, 73 comprise public research institutions and universities, demonstrating the State's importance in preserving and safeguarding Brazilian microbial diversity. The main taxonomic groups are bacteria (present in 70.24% of the collections) and fungi (52.98% of the collections) from different Brazilian ecosystems and biomes, including several type strains. Furthermore, the collections preserve microorganisms with biotechnological potential for application in environmental protection, public health, industry, and agribusiness. However, despite all these economic and biotechnological potentials, the data analysis showed serious limitations and fragilities, especially regarding physical infrastructure and human resources, and raises alerts about the risk that Brazilian collections are subjected to.

Financial stress can have significant implications for individuals, businesses, asset prices and the economy as a whole. This study examines the nonlinear structure and dynamic changes in the multifractal behavior of cross-correlation between the financial stress index (FSI) and four well-known commodity indices, namely Commodity Research Bureau Index (CRBI), Baltic Dry Index (BDI), London Metal Index (LME) and Brent Oil prices (BROIL), using multifractal detrended cross correlation analysis (MFDCCA). For analysis, we utilized daily values of FSI and commodity index prices from 16th June 2016 to 9th July 2023. The following are the most important empirical findings: (I) All of the chosen commodity market indices show cross correlations with the FSI and have notable multifractal characteristics. (II) The presence of power law cross-correlation implies that a noteworthy shift in FSI is likely to coincide with a considerable shift in the commodity indices. (III) The multifractal cross-correlation is highest between FSI and Brent Oil (BROIL) and lowest with LME. (IV) The rolling windows analysis reveals a varying degree of persistency between FSI and commodity markets. The findings of this study have a number of important implications for commodity market investors and policymakers.

Dyslipidemia presents high levels of serum cholesterol, being characterized as a risk factor for cardiovascular diseases, especially for the development of atherosclerosis. E. oleracea (OFEO), A. esculentus (OFAE), B. orellana (OFBO) and granulated (CHR) oils are rich in bioactive compounds with potential to treat changes in lipid metabolism. This study investigated the effects of treatments with oils from A. esculentus, E. oleracea, B. orellana and granules (Chronic SM®) on saturated fat-induced dyslipidemia Cocos nucifera L. The chromatographic profile showed the majority of unsaturated fatty acids in the tested oils. The quantification of tocotrienols and geranylgeraniol was obtained in OFBO and CHR. Treatments with OFEO, OFAE, OFBO and CHR were able to significantly reduce glycemia with p&gt;0.001, as well as hypertriglyceridemia, total cholesterol and LDL-cholesterol, in addition to increasing HDL-cholesterol. The treatments inhibited the formation of atheromatous plaques in the vascular endothelium of the treated rats. The obtained results suggest that the OFEO, OFAE, OFBO and CHR groups have antidyslipidemic effects and antiatherogenic activity.

The triplet excited state reactivity towards phenolic hydrogen of the -diketones benzil and 2,2´-furil in the ionic liquid 1-n-butyl-3-methyl imidazolium hexafluorophosphate [bmim.PF6] was investigated employing the nanosecond laser flash photolysis technique. Irradiation (lmax=355 nm) of benzil yields its triplet excited state with lmax at 480 nm and tT=9.6 μs. Under the same conditions, 2,2’-furil shows a triplet-triplet absorption spectrum with bands at 380, 410, 450, and 650 nm and tT=1.4 μs. Quenching rate constants (kq) of the reaction between benzil triplet and substituted phenols ranged from 1.4x107 L mol-1 s-1 (para-chlorophenol) to 1.8x108 L mol-1 s-1 (para-methoxyphenol). A new transient was formed in all cases, assigned to the benzil ketyl. Similar results were obtained for the quenching of 2,2’-furil triplet by phenols, for which kq ranged from 1.9x108 L mol-1 s-1 (para-chlorophenol) to 2.2x108 L mol-1 s-1 (para-methoxyphenol). The 2,2’-furil ketyl radical was also observed in all cases (lmax=380 nm). The quenching rate constants are almost independent of the substituent and diffusion-controlled (kq ~ 108 L mol-1 s-1). The proposed mechanism for the phenolic hydrogen abstraction by benzil and 2,2´-furil triplet may involve a proton-coupled electron transfer reaction, ultimately leading to the radical pair ketyl/aryloxyl.

Objective: To evaluate the direct costs of treating patients with neuromyelitis optica spectrum disorders (NMOSD) in outpatient care, from a hospital and Unified Health System (SUS) perspective. Methods: Observational study with data collection by microfunding, carried out with patients diagnosed with neuromyelitis optics, treated at a university hospital, in the city of Rio de Janeiro. Mann-Whitney tests were performed to measure cost differences between patient groups by disease severity and analysis perspective. Results: Nine individuals with a median age of 48 years (IQR 30 - 59 years) were included. The median total costs for patients with greater severity from the perspective of the SUS and the hospital were R$ 21,638.22 (IIQ: R$ 15,614.63; R$ 25,985.32) and R$ 32,094.11 (IIQ: R$ 25,610 .60; R$ 38,617.25) respectively. For patients with moderate severity the median was R$ 7,339.85 (IIQ: R$ 6,235.45; R$ 11,912.05) from the SUS perspective and R$ 11,505.80 (IIQ: R$ 7,339.85; R$ 22,424.76) from the perspective of the hospital, where the use of medications had a major impact. Conclusion: The main cost drivers were medicines, especially those used off-label, and procedures.

Liposomes have been used for several decades for the encapsulation of drugs and bioactives in cosmetics and cosmeceuticals. On the other hand, the use of these phospholipid vesicles in food applications is more recent and has been increasing significantly in the last ten years. Although in different stages of technological maturity - in the case of cosmetics, many products are on the market - processes to obtain liposomes suitable for the encapsulation and delivery of bioactives are highly expensive, especially aiming at scaling-up. Among the bioactives proposed for cosmetics and food applications, vitamins are the most frequently used. Despite the differences between the administration routes (oral for food and mainly dermal for cosmetics), some challenges are very similar (e.g., stability, bioactive load, average size, increase of drug bioaccessibility and bioavailability). In the present work, a systematic review of the technological advancements in the nanoencapsulation of vitamins using liposomes and related processes was performed; challenges and future perspectives were also discussed in order to underline the advantages of these drug loaded biocompatible nanocarriers for cosmetics and food applications.

Growth hormone (GH) deficiency affects up to 1 in 4,000 children and is usually treated with daily injections of GH whilst the child is still growing. With children typically diagnosed around 5 years old, this can mean over 10 years of therapy, which can place a considerable burden on the child and parent. Over three-quarters of children are estimated to be not fully compliant with therapy, which can compromise their chances of attaining their target height. In recent years, interactive mobile health (smart phone or tablet) interventions using game-like concepts, so called ‘gamification’, have increased in popularity and have demonstrated success in promoting positive self-management behaviour in children with chronic conditions, such as diabetes. The application of gamified interventions has the potential to support adherence to therapy and positive behaviour in children with GH deficiency in a number of ways: 1) By providing education in a format that the child understands and accepts (e.g. using behavioural constructs to facilitate explaining why adherence is important); 2) By providing a mechanism to reduce the anxiety and stress associated with administering the injection (e.g. diversion with a virtual pet); and 3) By providing feedback to encourage on-going engagement (e.g. rewards, progression through levels).

The term new genomic techniques (NGTs), is an umbrella term to describe a variety of techniques that can alter the genetic material of an organism and that have emerged or have been developed since 2001, when the existing genetically modified organism (GMO) legislation was adopted. The analytical framework to detect GMOs in Europe is a established single harmonized procedure which is mandatory for authorization of GM food and feed, thus generating reliable, transparent and effective labelling scheme for GMO products. However, NGT products challenge the implementation and enforcement of the current regulatory system in the EU, relating in particular to the detection of NGT products that contain no foreign genetic material. Consequently, current detection methods will fail to meet minimum performance requirements. Although existing detection methods may be able to detect and quantify even small alterations in the genome, this does not necessarily confirm the distinction between products resulting from NGTs subject to the GMO legislation and other products. Therefore, this study provides a stepwise approach for the in silico prediction of PCR systems specificity by testing a bioinformatics pipeline for amplicon and primer set searches in current genomic databases. We have tested our methodology in two mutant genotypes produced by CRISPR/Cas9 in Arabidopsis thaliana. Overall, our results demonstrated that the single PCR system developed for the identification of a nucleotide insertion in the grf1-3 genotype has sufficient hits in the databases that would not allow discrimination of this mutanted event. Differently, the second mutated genotype grf8-61 which contains a -3bp deletion, found no matches in the sequence variant database. Our approach is the first step in decision making on PCR system and modification of them for empirical testings.

This study analyzes the relationship between the spread of the SARS-CoV-2 virus (COVID-19) and the mobility patterns of the Portuguese population. By reducing mobility, the idea is that contacts are reduced, countering the spread of the virus in the community. As an indicator of the spread of the virus, the reproduction number (Rt) was used. Data from Google's Community Mobility Reports was used to evaluate changes in mobility patterns. This report uses location data from Android mobile phone users. The locations are divided into retail and recreation, grocery and pharmacy, parks, transit stations, workplaces and residential. In this year of the COVID-19 crisis in Portugal, population mobility patterns have changed over the various phases of the pandemic. At first, all mobility was affected uniformly, with the population avoiding much of the activity outside the home. In a second phase, there was some adaptation, and the areas considered to be of lower risk had less impact, emphasizing the changes in the relationship between daily life and the workplace.

In this article, we prove an orthogonal decomposition theorem for real inner product gyrogroups, which unify some well-known gyrogroups in the literature: Einstein, M\"{o}bius, Proper Velocity, and Chen's gyrogroups. This leads to the study of left (right) coset partition of a real inner product gyrogroup induced from a subgyrogroup that is a finite-dimensional subspace. As a result, we obtain gyroprojectors onto the subgyrogroup and its orthogonal complement. We construct also quotient spaces and prove an associated isomorphism theorem. The left (right) cosets are characterized using gyrolines (cogyrolines) together with automorphisms of the subgyrogroup. With the algebraic structure of the decompositions, we study fiber bundles and sections inherited by the gyroprojectors. Finally, the general theory is exemplified for the aforementioned gyrogroups.

The popular appreciation of dry white wines is most frequently directed to young wines. However, present consumption trends comprise the valorisation of aged dry white wines. Therefore, the present work was aimed at the sensory analysis of these wines with different ages to define their sensory space and to understand which factors drive their quality evaluation by experienced tasters (critics, oenologists and students). Individuals were asked to evaluate several synthetic and aesthetic attributes and to characterise the analytic sensory profile through a Check-All-That-Apply (CATA) methodology. The quality evaluations were differently correlated with wine synthetic parameters according to the taster group. For both critics and oenologists, overall quality scores were driven by persistence and complexity. Moreover, quality was also highly correlated with power for critics and with balance for oenologists. Quality scores were highly correlated with wine browning (absorbance at 420 nm) for critics. The tasting panel showed a homogeneous analytic description of aroma, taste and mouthfeel consistent with wine age. The different ages could be associated to a continuous sensory space characterised by a decreasing perception of freshness and increase in mature and mellowed descriptors. All wines shared an austere in-mouth perception elicited by their acidity, saltiness, bitterness, smoothness and dryness. The age prediction showed that most tasters failed to guess the age wines with more than roughly 13 years old, indicating that tasters were not familiar with the sensory features of white wines with 17 to 46 years old. In conclusion, experienced tasters consistently described the sensory space and recognised the high quality of aged dry white wines. Education programs may use the defined sensory spaces according to aging and to expand the range of quality perception by consumers.

Abstract: An attractive application of crude glycerol is in the generation of biomethane by means of anaerobic co-digestion, involving the decomposition of the organic matter in two or more substrates by bacteria and archaea, in the absence of oxygen. Thus, the objective of this work was to evaluate the potential of neural networks and fuzzy logic to predict the production of biomethane from the anaerobic co-digestion of glycerol and/or sugarcane molasses. Firstly, a reactor model was implemented using Scilab, with Monod kinetics involving two substrates and an intermediate (M2SI model), to generate a database for subsequent fitting and evaluation of neural and fuzzy models. The neural network package of Matlab was used. Fuzzy modeling was applied using the Takagi-Sugeno approach available in the ANFIS package of Matlab. The biomethane production results simulated by M2SI were used in neural network modeling, firstly employing a “generic” network applicable to all 8 scenarios. A very good fit was obtained (R²>0.99). Excellent performance was also observed for specific artificial neural networks (one for each condition). The parameters of the M2SI model for the 8 different conditions were also mapped using a neural network, as a function of the organic material composition. A fit with R²>0.99 was obtained using 25 neurons. In the case of the fuzzy logic, RMSE of 18.88 mL of methane was obtained with 216 rules, which was a value lower than 0.5% of the order of magnitude of the accumulated methane. It could be concluded from the results that fuzzy logic and artificial neural networks offer excellent ability to predict methane production, as well as to parameterize the M2SI kinetic model (using neural networks).

The aim of this article is to understand the symbolic representations of the assistance strategies aimed at disabled children, expressed in two newspapers published on the island of Faial, in the Azores, in the second half of the 19th and early 20th centuries (covering the time horizon between the end of the monarchic period and the implementation of the First Republic). The technique of documentary analysis and a subsequent qualitative thematic content analysis of childcare news collected in two local newspapers was used. The discursive records produced by the press on the assistance strategies value, on the one hand, an axiological dimension and forms of charitable intervention and, on the other hand, aggregate and reconcile the discourses and techniques inherent to charitable and philanthropic models. This mutual assimilation underlies the achievement of the same objective: the moralisation and integration of invalid childhood and, above all, the protection of the existing social order. We conclude that, perhaps contrary to what would be expected, the charitable logic articulated in a concomitant way with the philanthropic logic survived even with the stabilization of the republican period (result of a revolution that deposed the regime of the constitutional monarchy and implemented the republican regime in 1910 in Portugal whose political elites mobilized an official discourse that advocated the separation between the State and Religion, assigning the State the function of social assistance for children and youth). This demonstrates a certain dissociation, as well as a relative autonomy of conceptions about child and youth care between republican political ideology and current social practices at least in this specific context.

Synthesizing evolution in the post-Darwinan era has been a very challenging endeavor, both because of the great number of perspectives regarding the same natural phenomena and because of the growing technology involving mapping the origin of novelties and selection of biological variation that surpass Darwin’s original proposal of evolution by means of natural selection. Since 1859 a lot has changed, and many have presented new perspectives on evolution; either dismissing, correcting or incorporating Darwin’s ideas. This review aims to approach these different theories focusing on virus host interactions and descriptions of host-switching events in 3 different viral lineages, as well as their implications on the understanding of host-switching phenomena itself.

The Portuguese health system has a universal, public, general National Health Service (NHS), tending towards free healthcare access. Created in 1979, this delivery model developed from the integration and complementarity between the different response levels (primary, hospital, continuing, and palliative care). However, over these 40 years, the initially centralized system underwent a decentralization process with the creation of Regional Health Administrations in the five mainland administrative regions. Since then, the entire NHS has settled around this new organization. The most recent step started in 2018 with decentralizing primary health care skills to 190 municipalities. This paper presents the various critical issues involved in the latest gradual decentralization process in health, intending to bring services closer to the citizens, and more focused on their needs. The article identifies and discusses the implications of this experience based on the steps foreseen in the already published legal texts.

The development of electric aircrafts is becoming an important technology for achieving the goals set by the European Commission for the reduction of gases emissions by 2050 in the aeronautical transportation system. However, there is a gap between the values of specific power in commercial electric machines and the ones required for aeronautical applications. Therefore, the search for alternative materials and non-conventional designs is mandatory. One emergent solution is using superconducting machines and systems to overcome the current limits of conventional electrical machines. This work reviews the new hybrid and all-electric aircraft tendencies, complementing it with recent research on the design and development of high specific power superconducting machines. This includes the main topologies for hybrid and all-electric aircraft, with an overview of the ongoing worldwide projects of these types of aircrafts, systematizing the main characteristics of their propulsion systems. It also includes the research on superconducting machines for the purpose of high specific power, considering the impact on the redesign of aircraft systems in the electrical, cooling, and fuel source sense.

The energy matrix worldwide has been going through difficulties in its discussions - such as irregular exploration, inefficient public policies, and arbitrariness concerning diplomatic and political definitions of those involved in this market. This work's general objective consists in analyzing associations and statistical inferences of the largest world oil producers, assimilating the contributions and singularities of this market from 1993 to 2020. Based on the Organization of the Petroleum Exporting Countries (OPEC), it was possible to identify the possible inferences and contributions of the ten largest oil producers in the world in more than two decades using statistical analysis through correlation, regression, and statistical analysis of variables. According to the research and the literature on the area, the oil market proposes support to its discussions, mainly in its productive approaches. It is possible to identify this market as a solid link to geopolitical actions, distributing the possibilities through economic bias and socio-cultural and historical factors on a global level.

Malassezia species are part of human commensal microbiota and is also related to diseases. Little is known about the interaction of these microorganisms with their host. Here we established two standard culture conditions for Malassezia spp. to perform infection assays using C. elegans and T. molitor. Invertebrate hosts infected by Malassezia spp. cultured in M9M resulted in higher death rate on survival assays when compared to yeasts cultured in standard Dixon medium indicating that M9M cultured Malassezia species have increased virulence. The culture and infection conditions established in this work, using invertebrate alternative models, are valuable tools to understand Malassezia-host interaction.

Peri-implantitis continues to be one of the major reasons for implant failures. We propose a new approach for incorporating MTA into Zirconia implant surfaces with Nd:YAG laser and investigate the biological response of peri-implant cells as well as the microbiological response. Discs of Zirconia stabilized with Yttria and Titanium were produced according 4 tested groups: Nd:YAG laser textured Zirconia coated with MTA (Zr MTA); Nd:YAG laser textured Zirconia (Zr Textured); Zirconia and Titanium discs (Zr and Ti ). Contact profilometry was used to evaluate surface roughness. Human osteoblasts, gingival fibroblasts and S. oralis were cultured on samples. Cell adhesion and morphology, cell viability, cell differentiation markers and bacterial growth were assessed. Zr Textured roughness was significantly higher compared to all other groups. Cellular adhesion was observed at 1 day in all samples in both cell lines. Osteoblasts viability was lower in Zr MTA group, unlike fibroblasts viability was shown to be higher in Zr MTA group compared to Zr Textured group at 3 and 7 days. Osteocalcin and IL-8 release by osteoblasts were higher in Zr MTA. Zr Textured showed higher IL-8 values released by fibroblasts. No differences in S. oralis CFUs were observed between groups. The results suggest that Zirconia implant surfaces coated with MTA seems to promote fibroblasts proliferation and osteoblasts differentiation, however does not appear to have antibacterial properties.

Biochar is a carbonaceous material derived from the thermochemical conversion of biomass under oxygen-lean conditions. Its properties render it many applications in agriculture, environmental remediation, and catalysis. Commonly produced by pyrolysis under a nitrogen atmosphere, the biochar composition is influenced mainly by residence time, heating rate, and process temperature. The existing literature primarily assesses biochar properties, such as ultimate, proximate, calorific, porosity, and combustibility, generated under various thermo-conversion conditions. However, there is a notable lack of sufficient investigation and attention given to the practical application of biochar. This article seeks to bridge that gap by enhancing the comprehension of the necessary experimental assessment for specific biochar applications and proposing process optimization methods using Multi-Criteria Decision Analysis (MCDA). By delving into these aspects, the study offers a concise overview of biochar production and presents a comprehensive panorama based on articles and patents. Additionally, the research explores the physicochemical characterization techniques associated with biochar and its various applications in conjunction with MCDA. This comprehensive approach aims to uncover valuable insights that could further advance the practical and sustainable utilization of biochar in a wide range of fields.

Deterministic simulations using the SWAN model were conducted along a stretch of the Tietê-Paraná waterway in the Ilha Solteira dam reservoir, São Paulo, Brazil, to assess the water waves generated by winds. Simultaneously employs a probabilistic metamodeling approach (PCE) and Sobol indices, to quantify uncertainty of the five involved physical parameters (wind velocity and direction, bottom friction (JONSWAP), whitecapping and depth-induced breaking index). In the deterministic part, Janssen’s formulation yielded the most successful and accurate estimations of wave heights. Probabilistic analysis underscored the importance of wind data and the whitecapping parameter in model calibration, with a significant influence of wind speed indicated by Sobol indices. The results not only refined the model calibration process, but also allowed the creation of contour maps for wave height and period that offer practical pre-project applications. This work advances understanding of wind wave hydrodynamics deterministically and probabilistically, with good concordance and performance indices compared to field data, despite being scarce.

This study involved a comprehensive examination of sensory attributes in Bísaro dry-cured loins, including odor, androsterone, scatol, color, fat color, hardness, juiciness, chewiness, flavor intensity, and flavor persistence. Analysis of 40 samples revealed a wide variation in these attributes, ensuring a robust margin for multivariate calibration purposes. The respective near-infrared (NIR) spectra unveil distinct peaks associated with significant components such as protein, lipid, and water. Support Vector Regression (SVR) models were methodically calibrated for all sensory attributes, with optimal results using multiplicative scattering correction pre-treatment, MinMax normalization, and radial base kernel (non-linear SVR model). The predictive models exhibited acceptable results, characterized by R-squared values close to 1 (0.9616 - 0.9955) and low RMSE values (0.0400 – 0.1031). The prediction set's relative standard deviation (RSD) remained under 5%. Comparisons with prior research revealed significant improvements in prediction accuracy, particularly when considering attributes like pig aroma, hardness, fat color, and flavor intensity. This research underscores the potential of advanced analytical techniques to improve the precision of sensory evaluations in food quality assessment.

This study assesses the applicability of different-resolution multispectral remote sensing images for mapping and estimating the aboveground biomass (AGB) of Carpobrotus edulis, a prominent invasive species in European coastal areas. The performance of three sets of multispectral images with different resolutions was compared: (i) 2.5 cm Ground Sample Distance (GSD), 5 cm GSD and 10 cm GSD images. The images were classified using the supervised classification algorithm Random Forest and later improved applying a sieve filter. The results show that the three tested image resolutions allow constructing reliable coverage maps of C. edulis, with Overall Accuracy values of 89%, 85% and 88% for the classification of the 2.5 cm, 5 cm and 10 cm GSD images, respectively. Samples were also collected, dried and weighed to estimate AGB using the relationship between the Dry Weight and Vegetation Indices (VI). The regressions were evaluated based on their R² and Normalised RMSE. The best-performing VI-DW regression models achieved: R² = 0.87 and NRMSE = 0.09 for the 2.5 cm resolution; R² = 0.77 and NRMSE = 0.12 for the 5 cm resolution; and, R² = 0.64 and NRMSE = 0.15 for the 10 cm resolution. C. edulis area and total AGB were: 3441.10 m² and 28,327.1 kg (with a Relative Error (RE) = 0.08), for the 2.5 cm resolution; 3070.04 m² and 29,170.8 kg (RE = 0.08), for the 5 cm resolution; and, 2305.06 m² and 22,135.7 kg (RE = 0.11), for the 10 cm resolution. Differences were analysed in detail, spatially, to determine their causes. Final analyses suggest that, for C. edulis, multispectral imagery of up to 5 cm GSD is adequate for the estimation of the species’ distribution and biomass.

We assessed the prevalence and correlates of stunting among children aged 6-23 months from poor households in Rwanda. A cross-sectional study was conducted among 817 mother-child dyads living in poor households from five districts with a high prevalence of stunting. We used descriptive statistics to determine the prevalence of stunting, bivariate analysis, and a multivariate logistic re-gression model to measure the strength of the Association between childhood stunting and exposure variables. Stunting was at 34.1%. Children aged 19-23 months (AOR = 4.410, 95% CI: [1.911-10.173], p-value=0.01), children aged 13-18 months (AOR=2.788, 95% CI: [1.302-5.968], p-value=0.08), children from households that do not have a vegetable garden (AOR=2.165, 95% CI: [1.201-3.905], p-value<0.01) were more likely to be stunted. On the other hand, children whose mothers were not exposed to physical violence (AOR= 0.145, 95% CI: [0.074-0.287], p-value<0.001), children whose fathers were working (AOR=0.036, 95% CI: [0.005-0.242], p-value=0.001), children whose both parents were working (AOR=0.208, 95% CI: [0.051-0.851], p-value=0.029) and children whose mothers had good hand-washing practice (AOR=0.181, 95% CI: [0.091-0.362], p-value<0.001) were less likely to be stunted. Our findings underscore the importance of integrating the promotion of hand-washing practices, owning vegetable gardens, and intimate partner violence prevention in the interventions to fight stunting.

Leishmaniasis is a group of neglected infectious, non-contagious diseases caused by parasites of the Leishmania genus which affects millions of people worldwide. The drugs available for its treatment, especially in cases of visceral leishmaniasis, are old, outdated, have serious side effects and in many cases are ineffective due to the emergence of resistant strains. In this context, the search for new candidates for more effective and safer drugs which can become new therapeutic alternatives is a constant need. In this work, 10 new chalcones were synthesized in high yields through Claisen-Schmidt condensation and were evaluated in vitro against Leishmania infantum promastigotes and amastigotes. CP04 and CP06 compounds were the most promising, respectively showing IC50 values = 13.64 ± 0.25 and 11.19 ± 0.22 against promastigotes, and IC50 = 18.92 ± 0.05 and 22.42 ± 0.05 against amastigotes. The compounds did not show cytotoxicity in erythrocytes, showing selectivity indexes greater than 74 and 90. Molecular docking studies carried out under the sterol 14-alpha demethylase (CYP-51) (PDB: 3L4D) and trypanothione reductase (PDB: 5EBK) enzymes from L. infantum evidenced the great affinity of the CP04 molecule for these targets, showing Moldock score values of -94.0758 and -50.5692 KJ/mol-1, with these values being much lower than the co-crystallized ligand energies. Molecular dynamics simulations demonstrated great stability of CP04 in its targets, thus indicating a real interaction possibility. Our findings confirm the potential that chalcones have as candidates for anti-leishmania drugs, and suggest that the CP04 compound may become a promising drug candidate to design and develop novel chalcone-based analogs for leishmaniosis therapy.

The World Health Organization estimates that every year air pollution kills seven million people worldwide. As it is expected that climate change will affect future air quality patterns, the full understanding of the links between air pollution and climate change, and how they affect human health, are challenges of future research. In this scope, a methodology to assess the air quality impacts on health was developed. The WRF-CAMx modelling framework was applied for the medium-term future climate (considering the SSP24.5 scenario) and for the recent past (considered as baseline). Following the WHO recommendations, mortality health indicators were used to estimate health impacts of long-term exposures. For that, the Aveiro Region, in Portugal, was considered as a case study. Future climate results indicate the occurrence of higher temperatures, and lower total precipitation. Despite that, improvements in the main pollutants’ concentrations, and consequently in the reduction of the related premature deaths are foreseen, mainly due to the reduction of pollutants emissions imposed by the European legislation for the upcoming years. The applied approach constitutes an added value in this research field, being crucial to anticipate the effects of climate change on air quality and evaluate their impacts on human health.

Magnesium oxide is typically white and can be colorized with transition metal insertion by doping or by adsorption. We present the preparation of green colored hydroxide by the adsorption of nickel ions by porous MgO. MgO was prepared by the colloidal starch suspension method and used to remove nickel ions from the aqueous solution. The oxides and hydroxides, before and after adsorption, were characterized by X-ray diffraction technical, and show that a phase change occurs, a transition from periclase (MgO) to brucite (Mg(OH)2) due to the interaction with nickel salts (acetate, chloride, and nitrate). The FTIR spectrum corroborates with the DRX data on the formation of brucite like crystal lattices. The new samples present a green color, indicative of the incor-po-ration of the Ni2+ ions. Mixed oxides in the form of brucite were used in microbiological tests and showed action against fungi and bacteria, with bactericidal, bacteriostatic, or fungistatic function. Green brucite (NixMg1-x(OH)2) can be used as an inorganic pigment in white or colorless paints with a special biocidal property.

A large set of undrained compression triaxial tests was carried out on different types of cohesionless soils, from sands to silty-sands and silts. Shear wave velocity measurements were carried out alongside. These tests exhibited distinct state transitions ranging from flow liquefaction to strain softening or strain hardening. With the purpose of defining a framework to assess soil liquefaction, it was found that the ratio between the shear wave velocity (VS0) and the peak undrained deviatoric stress, qpeak, VS0/qpeak, could be accurately used to define a boundary between liquefaction and strain hardening for sands, and between strain softening and strain hardening for silty-sands and silts. Since this ratio is a function of the tested material, it was also discovered that the prediction of these boundaries could be made as a function of soil grading, namely via the coefficient of uniformity, CU. Despite not being regarded as a strong geomechanical parameter, CU is easily determined from a grain-size distribution test and it has an empirically proven correlation with critical state parameters.

Coagulant lectin from Moringa oleifera seeds (cMoL) was characterized by potentiometry and scanning electron microscopy (SEM) using MOF, Metal-Organic Frameworks of [Cu3(BTC)2.H2O)3]n, to immobilize cMoL and construct biosensors. Developed aluminum-air batteries degraded indigo carmine dye formulated similar to a textile effluent; biosensors investigated cMoL interaction with specific galactose and monitored residual dye. SEM revealed components of electrode assembly steps. Oxide reduction reactions of batteries generated Al(OH)3 promoting dye electrocoagulation. Cyclic voltammetry showed differentiated redox peaks related to dye residue quantification by cMoL. Electrochemical systems evaluated cMoL interaction with ligand and efficiently degraded dye; biosensors could be used for lectin characterization and monitoring dye residues in environmental textile effluents.

Sensing Technology (ST) plays a key role in Structural Health Monitoring (SHM) systems. ST focuses on developing sensors, sensory systems or smart materials that monitor a wide variety of materials properties aiming to create smart structures and smart materials, using Embedded Sensors (ESs), and allowing continuous and permanent measurements of the structural integrity. The integration of ESs is limited to the processing technology to embed the sensor due to its high-temperature sensitivity and the possibility of damage during its insertion into the structure. In addition, the technological process selection is dependent on the base material composition, either metallic or composite parts. The selection of smart sensors or the technology underlying them is fundamental to the monitoring mode. This paper presents a critical review of the fundaments and applications of sensing technologies for SHM employing ESs, focusing on the actual developments and innovation of these, as well as analysing the challenges that these technologies present, to build a path that allows a connected world through distributed measurement systems.

Braskem is the only company in the world that produces green polyethylenes (HDPE – high density polyethylene and LLDPE – linear low density polyethylene) derived from the dehydration of sugarcane ethanol. Although the performance of green and fossil nominally same polyethylenes are equivalent, commercial clients may use blends of up to 51% of green polyethylenes and 49% of fossil polyethylenes and still have the right to use the I’m greenTM label which appeals to environmental conscious consumers and places these companies in a noticeable position. The Annual Income Statement - AISs from 2010, when Braskem started production of green PE, until 2018, show there was growth of revenues. Despite of the production of polyethylenes have continued stable and the number of green polyethylenes patents have decreased since 2014, the profits with the BRKM5 stocks increased. There is no transparency of how carbon credits were gained and in the AIS. Investments in securities in the Brazilian financial market (BRKM5 and carbon credits) are much more attractive than the investment in new patents, because they generate greater gains (268% increase in the average share price of BRKM5 from 2012 to 2018) and do not require large investments in R&D.

The present work reports an experimental thermodynamic study of two nitrogen heterocyclic organic compounds, fenclorim and clopyralid, that have been used as herbicides. The sublimation vapor pressures of fenclorim (4,6-dichloro-2-phenylpyrimidine) and of clopyralid (3,6-dichloro-2-pyridinecarboxylic acid) were measured, at different temperatures, using a Knudsen mass-loss effusion technique. The vapor pressures of both crystalline and liquid (including supercooled liquid) phases of fenclorim were also determined using a static method based on capacitance diaphragm manometers. The experimental results enabled accurate determination of the standard molar enthalpies, entropies and Gibbs energies of sublimation for both compounds and of vaporization for fenclorim, allowing a phase diagram representation of the (p,T) results, in the neighborhood of the triple point of this compound. The temperatures and molar enthalpies of fusion of the two compounds studied were determined using differential scanning calorimetry. The standard isobaric molar heat capacities of the two crystalline compounds were determined at 298.15 K, using drop calorimetry. The gas phase thermodynamic properties of the two compounds were estimated through ab initio calculations, at the G3(MP2)//B3LYP level, and their thermodynamic stability was evaluated in the gaseous and crystalline phases, considering the calculated values of the standard Gibbs energies of formation, at 298.15 K.

Fusarium wilt caused by Fusarium oxysporum f. sp. cubense (Foc) is one of the most destructive diseases in banana farming worldwide. Knowledge of the factors of genetic diversity and virulence of the pathogen contributes to the development of resistant cultivars and in management strategies based on exclusion. In this study, phenotypic traits such as virulence and aggressiveness in a sample of 52 Foc isolates, were analyzed and their relationship to the presence of putative effectors of gene SIX (Secreted in Xylem) pathogenicity homologues, verified. According to the dissimilarity matrix, there were three isolates closest to the standard Foc race 1 strain. Isolates 229A and 218A, were selected according to their aggressiveness profile in 'Grand Naine' and 'Prata-Anã', respectively, I order to replace the standard isolate of race 1 in the resistance screening process carried out by the breeding program. Two homologues of the SIX8 gene, SIX8a and SIX8b, are present in isolates of Foc from Brazil and the SIX8b gene correlates with avirulence in the cultivar ‘Grand Naine’ (Cavendish). These results are important to support the banana genetic breeding program by identification of sources of resistance to Foc and contribute in the establishment of the function of SIX effector proteins.

The fetal heart rate (FHR) is a screening signal for preventing fetal hypoxia during labor. When experts analyze this signal, they have to position a baseline and identify decelerations and accelerations. These steps can potentially be automated and made more objective by data processing analysis, but training and evaluation datasets are required. Here, we describe a dataset of 155 FHR recordings in which a reference baseline, accelerations and decelerations have been annotated by expert consensus. 66 FHR recordings with a shared expert analysis have been included in a training dataset, and 90 other FHR recordings with a non-shared expert analysis have been included in an evaluation dataset. Researchers wishing to evaluate their automatic analysis method should submit their results for comparison with the expert consensus. The dataset also contains the results produced by 11 re-coded automatic analysis methods from the literature. All the data are available at http://utsb.univ-catholille.fr/fhr-review.

Free-range sloths living in an urban environment is rare. In this study, human opinions, attitudes and interactions with a population of Bradypus variegatus in a public square were investigated. A questionnaire was applied to people in the square where the sloths reside, and informal, opportunistic observations of human-sloth interactions were made. 95% of respondents knew of the sloths’ existence in the square and 87.8% likes their presence. Opinions about population size differed greatly and younger people were concerned if the square was appropriate place for them. Some human-sloth interactions showed the consequence of lack of biological knowledge. People initiated all sloth-human interactions. The fact that sloths are strictly folivorous has limited their interactions with humans and consequently minimised negative impact of the human-animal interaction on their wellbeing. These results demonstrate that while there is a harmonious relationship between people and sloths, actions in environmental education of the square’s public could be beneficial for the sloths.

Pregnant women have been considered a high-risk group for SARS-CoV-2 infection; the impact of the disease on the health of a mother and her child is still being studied. The emotional impact of the pandemic on pregnant women has been extensively studied. Emotional distress is proposed as a perspective to explain the emotional manifestations of women during this stage as something common rather than pathological. The objective of this study was to know the emotional experience of women who tested positive for SARS-CoV-2 towards the end of their pregnancy, during the first and second waves of COVID in Mexico. A qualitative study was carried out: 18 pregnant women with COVID were interviewed. A thematic analysis of the data was performed, resulting in three main themes and 14 subthemes. The COVID-infected mothers-to-be experienced mild to moderate emotional distress. It was more intense for those with comorbidities. This distress was aggravated during obstetrical complications and comorbidities, as well as during COVID and postpartum. The emotional distress was appeased by both the perception of medical care and social support. The emotional distress of pregnant women with COVID requires emotional accompaniment to reduce its impact.

Functional articular cartilage regeneration remains an unmet medical challenge, increasing the interest for innovative biomaterial-based tissue engineering (TE) strategies. Hydrogels, 3D macromolecular networks with hydrophilic groups, present articular cartilage-like features such as high water content and load-bearing capacity. In this study, 3D porous polyethylene glycol diacrylate (PEGDA) hydrogels were fabricated combining the gas foaming technique and an UV-based crosslinking strategy. The 3D porous PEGDA hydrogels were characterized in terms of their physical, structural and mechanical properties. Our results showed that the size of the hydrogels pores can be modulated by varying the initiator concentration. In vitro cytotoxicity tests showed that 3D porous PEGDA hydrogels presented high biocompatibility both with human chondrocytes and osteoblast-like cells. Importantly, the 3D porous PEGDA hydrogels supported the viability and chondrogenic differentiation of human bone marrow-derived mesenchymal stem/stromal cells (hBM-MSCs)-based spheroids as demonstrated by the positive staining of typical cartilage extracellular matrix (ECM) (glycosaminoglycans (GAGs)) and upregulation of chondrogenesis marker genes. Overall, the produced 3D porous PEGDA hydrogels presented cartilage-like mechanical properties and supported MSC-spheroid chondrogenesis, highlighting their potential as suitable scaffolds for cartilage TE or disease modelling strategies.

Lead, known as a metal with high neurotoxicity to children, cadmium, which is a carcinogenic and bioaccumulative contaminant, and arsenic, a class 1 carcinogenic according to the International Agency for Research on Cancer, are toxic elements (TEs) whose relevant route of exposure may be diet. We determined the bio-accessible fraction of lead, cadmium, and arsenic from the diet of preschool children from two day care centers (DCC). A cross-sectional study was conducted with 64 one–four-year-old children from two DCCs where the 24-h duplicate diet samples were collected. The diet samples were analyzed by ICP-MS for lead, cadmium, and arsenic total concentrations (n = 64) and their bio-accessibility were analyzed for a subsample (n = 10). The dietary intake (DI) mean for lead, cadmium, and arsenic were 0.18 ± 0.11 µg kg⁻¹ bw, 0.08 ± 0.04 µg kg⁻¹ bw, and 0.61 ± 0.41 µg kg⁻¹ bw, respectively. All DI calculated for TEs, considering total intake, were found lower than the tolerable limits (TL) (European Union, or World Health Organization, WHO, when applicable) except for one child’s Pb intake. Bio-accessibilities ranged between 0% to 93%, 0% to 103%, and 0% to 69%, for lead, cadmium, and arsenic, respectively. Although DI for TEs has been found lower than TL, these reference values have been recently decreased or withdrawn since it was for lead and arsenic whose TL were withdrawn by WHO.

This study aimed to analyze the effect of a flow training program based on mindfulness applied to young and adult elite handball athletes. A quantitative, quasi-experimental, descriptive data analysis approach was carried out. The sample included 105 athletes (51 female and 54 male). The athletes were divided into two groups: i) experimental (n = 53) and ii) control (n = 52). The results of the repeated ANOVA indicated that the experimental group achieved significant improvements compared to the control group in decision making (n2p=.086), mental well-being (n2p=.045), dispositional flow state (n2p=.103), non-judgment (n2p=.040), refocusing (n2p=.052) and mindful trait in daily life (n2p=.058). In the linear regression test, the factor non-judgment was identified as a predictor of decision making (F(103)=7.99, p=.006) and the predictor for the mental well-being were dispositional flow state (F(102)=29.2, p

This work aimed to carry out a bioremediation study to evaluate the resistance of Penicillium sp. isolated from kefir grains for the treatment of copper. The fungal culture medium was prepared using a 2% malt-agar medium at pH 7.0 in which Penicillium sp. was inoculated. Penicillium sp. growing in a liquid medium showed a decrease in biomass in presence of Cu(NO3)2 (800 mg.L-1), suggesting that the metal impacts the growth rate of the fungus. Moreover, the combined factors of pH and the presence of the inorganic contaminant impacted the radial growth of the fungus, causing inhibition of 73% at pH 4.0, 75% at pH 7.0, and 77% at pH 9.0 in liquid medium compared to control. However, images obtained with scanning electron microscopy showed the integrity of the fungus cell, even at high doses of copper in the medium. Therefore, it can be concluded that Penicillium sp. isolated from kefir grain can bioremediate the environment and that the harmful effects of heavy metals can be minimized as a result biosorption. Although the growth of Penicillium sp. is inhibited, such retardation requires high doses of copper nitrate, thus ensuring the use of this microorganism for protection against the harmful effects of non-essential copper in the environment.

The introduction on Zinc oxide nanoparticles (ZnOn) in sunscreens solved the issue of poor spreadability of these formulations, which often left a white film on the skin. However, safety concerns have arisen regarding the topical application of ZnOn. Some studies employed commercial sunscreens to address the safety issues of the topical application of ZnOn; however, commercial formulations are often complex and contain a wide range of ingredients that could attenuate the potential damage caused by the ZnOn. Therefore, in this study we aimed to develop a simple stable formulation containing 20% of coated and uncoated ZnOn, characterize the formulations and the nanoparticles, and assess the skin penetration in Franz diffusion cell. The Feret's diameter for the uncoated and coated ZnOn was 137 nm and 134 nm, respectively. For the uncoated ZnOn the hydrodynamic size in water was 368 nm and for the coated ZnOn, the average hydrodynamic size in ethyl acetate was 135 nm. The incorporation of ZnOn led to formulations more consistent and easier to spread, as suggested by the lower work of shear and higher values of firmness, cohesiveness, consistency and index of viscosity compared with the vehicle. The stability assessment at 45ºC suggested that the formulations containing the ZnOn were stable for 30 days and the vehicle was stable for 90 days. The assessment off the skin penetration by reflectance confocal laser microscopy indicated that the formulations did not permeate into the deepest layers of the skin, but accumulated on the skin furrows, hair and hair follicle.

The background of this research is the environmental sustainability assessments in the aviation ecosystem, particularly concerning airports, are getting significant attention from the industry, regulators, and researchers. A standardized and comprehensive approach is essential for uniformly addressing the global impacts of these assessments across the industry. The main objective of this study is to develop a unique framework that encompasses the requirements of aviation regulators as well as industry and academic metrics, aiming for a standardized approach to environmental sustainability assessments at airports. The methodology used the Sum of Ranking Method to evaluate each environmental indicator precisely. It was applied to five airports globally, providing a diverse testing ground to assess the proposed metrics’ applicability and effectiveness and validate the framework. The results showed that applying the framework across these varied airport environments demonstrated its viability and effectiveness, indicating that it can be successfully applied to different airport realities. The conclusion shows that the developed framework can be successfully applied globally, suggesting that it can be a valid method for international adoption in environmental airport sustainability analysis, offering a standardized approach that could be accepted and utilized worldwide.

Estimating age at death is essential to establish a biological profile from human skeletal remains in both forensic and archeological settings. Imaging studies of skeletal age changes in adults have described metamorphosis of trabecular bone structure and bone loss in the proximal femur , as well as changes in morphology during different stages of life. This study aims to assess the utility of a digital representation of conventional X-ray films of the proximal femur for the estimation of age at death in a sample of 91 adult individuals (47 females and 44 males) of the Coimbra Identified Skeletal Collection. The proposed approach showed a root mean squared error (RMSE) of 17.32 years (and mean absolute error of 13.47 years) for females and an RMSE of 14.06 years (mean absolute error of 11.08 years) for males. The main advantage of this approach is the consistency in the feature detection and extraction, as X-ray images projected on the femora space will always produce the same set features to be analyzed for age estimation while more traditional methods rely heavily on operator experience which can lead to inconsistent age estimates among experts.

Recently, new semantic segmentation and object detection methods have been proposed for direct processing of three-dimensional (3D) LiDAR sensor point clouds. LiDAR can produce highly accurate and detailed 3D maps of natural and man-made environments and is used for sensing in many contexts due to its ability to capture more information and its robustness to dynamic changes in the environment. In addition, the cost of LiDAR sensors has decreased in recent years, which is an important factor for many application scenarios. The challenge with 3D LiDAR sensors like the Velodyne HDL-64E S2 is that they can output large 3D data at up to 1,300,000 points per second, which is difficult to process in real time when applying complex algorithms and models for efficient semantic segmentation. Most existing approaches are either only suitable for relatively small point clouds or rely on computationally intensive sampling techniques to reduce their size. As a result, most of these methods do not work in real-time in realistic field robotics application scenarios, making them unsuitable for practical applications. Systematic point selection is a possible solution to reduce the amount of data to be processed, but although it is memory and computationally efficient, it selects only a small subset of points, which may result in important features being missed. To address this problem, we propose a new approach to semantic segmentation in forestry that uses a systematic sampling method in which the local neighbors of each point are retained to preserve geometric details. Our approach has been shown to process up to 1 million points in a single pass. It outperforms the state of the art in efficient semantic segmentation in large datasets such as Semantic3D. We also present a preliminary study on the performance of LiDAR-only data, i.e., intensity values from LiDAR sensors without RGB values for semi-autonomous robot perception.

This publication highlights the effect of mechanochemical treatment in a high-speed thermoki-netic mixer as an alternative for recycling ground tire rubber (GTR). The GTR initially has an 80% gelled fraction and presented up to 50% gel fraction in the most intensive condition (5145 rpm, s2). Processing at the lowest speed (2564 rpm, s1) resulted in greater selectivity concerning the mechanochemical treatment (K~1). In the most intense processing condition (10 min. at s2), more significant degradation was observed via random scission with a reduction of the glass transition temperature, Tg (11ºC), an increase of the soluble polymer fraction, and a more signif-icant reduction in crosslink density. The artificial neural network could describe and correlate the thermal degradation profile and processing conditions with the physicochemical characteris-tics of the GTR. The approach presented here represents an alternative for mechanochemical treatment since it can reduce the crosslink density with selectivity and in short times (1-3 min.).

The predictability of wind information in a given location is essential for the evaluation of a wind power project. Predicting wind speed accurately improves the planning of wind power generation, reducing costs and improving the use of resources. This paper seeks to predict the mean hourly wind speed in anemometric towers (at a height of 50 meters) at two locations: a coastal region and one with complex terrain characteristics. To this end, the Holt-Winters (HW), Artificial Neural Networks (ANN) and Hybrid time-series models were used. Observational data evaluated by the Modern-Era Retrospective analysis for Research and Applications-Version 2 (MERRA-2) reanalysis at the same height of the towers. The results show that the hybrid model had a better performance in relation to the others, including when compared to the evaluation with MERRA-2. For example, in terms of statistical residuals, RMSE and MAE were 0.91 and 0.62 m/s, respectively. As such, the hybrid models are a good method to forecast wind speed data for wind generation.

Abstract: (1) Background: Surgery is the best curative option for Gastric Cancer (GC). However, morbimortality associated with surgery still a significant problem. Thus, it is essential to determine the preoperative surgical risk, to optimize outcomes in higher risk patients. (2) Methods: Patients who underwent curative gastrectomy between January 2010 and December 2013 were included, obtaining a sample of 131 patients, and the acuity of the scales understudy was evaluated. The predictive power of the scales was evaluated through calibration and discrimination. (3) Results and Conclusions: Regarding mortality, the scales demonstrated good calibration, with POSSUM and P-POSSUM obtaining the best O:E ratio. The scales presented good discrimination, with POSSUM showing the best result. Considering morbidity, the scales showed good calibration and discrimination. POSSUM and P-POSSUM seem to have potential in predicting morbidity and mortality when applied to the studied population, but there is a need for further studies in this area.

A wide panel of microtubule-associated proteins and kinases is involved in coordinated regula-tion of the microtubule cytoskeleton and may thus represent valuable molecular markers contrib-uting to major cellular pathways deregulated in cancer. We previously identified a panel of 17 microtubule-related (MT-Rel) genes that are differentially expressed in breast tumors showing resistance to taxane-based chemotherapy. In the present study, we evaluated the expression, prognostic value and functional impact of these genes in breast cancer. We show that 14 MT-Rel genes (KIF4A, ASPM, KIF20A, KIF14, TPX2, KIF18B, KIFC1, AURKB, KIF2C, GTSE1, KIF15, KIF11, RACGAP1, STMN1) are up-regulated in breast tumors compared with adjacent normal tissue. Six of them (KIF4A, ASPM, KIF20A, KIF14, TPX2, KIF18B) are overexpressed by more than 10-fold in tumor samples and four of them (KIF11, AURKB, TPX2 and KIFC1) are essential for cell survival. Overexpression of all 14 genes, and underexpression of 3 other MT-Rel genes (MAST4, MAPT and MTUS1) are associated with poor breast cancer patient survival. A Systems Biology approach highlighted three major functional networks connecting the 17 MT-Rel genes and partners, which are centered on spindle assembly, chromosome segregation and cytokinesis. Together our studies identified mitotic Aurora kinases and their substrates as major targets for therapeutic approaches against breast cancer.

The gold nanoparticle (AuNP) was synthesized using the well-known Turkevich method. This article explains didactic step-by-step of the synthesis, showing pictures of the entire process, including a well-explained mechanism and characterization study. The synthesis includes the reduction of NaAuCl4 using sodium citrate in high temperature (around 90 ⁰C). The two main mechanisms used to explain the AuNP synthesis via Turkevich method were explained. The first mechanism considerate that a nanowire intermediary and the other proposed that aggregate intermediates are not formed at any time during the synthesis. The materials (NaAuCl4 and AuNP) were characterized by UV-Vis, SEM, AFM, XRD and DLS. The UV-Vis exhibit an absorption maximum in 521 nm because the surface plasmon resonance (SPR) absorption band of AuNP. The SEM images of NaAuCl4 presents crystals with cubic shapes, while the AuNP presents average particle size of about 16-25 nm and particles that appear mainly spherical. To confirm the particles shapes, the AFM was conducted and it was possible to observe clearly the individual spherical nanoparticles. The XRD of AuNP showed the four main characteristic peaks for silver corresponding to (111), (200), (220) and (311) planes, confirming the cubic (FCC) silver. The DLS presented the average particle size of 3.3 ± 0.9 nm and the polydispersity index (PDI) of 0.574. In summary, the AuNP was synthesized using a simple and fast method. The result was a spherical and ultrasmall particle, that can be used is several applications.

Fetuses of pregnant women affected by anti-Ro/anti La antibodies are at risk to develop complete atrioventricular heart block (CAVB) and other potentially life-threatening cardiac affections. CAVB can develop in less than 24 hours. Treatment with anti-inflammatory drugs and immuno-globulins (IVIG) can restore normal rhythm if applied in the transition period. Routine weekly echocardiography as often recommended will seldomly detect emergent AVB. Surveillance of these pregnancies is controversial. To obtain an overview of the current practice in Germany we have developed a web-based survey sent by the DEGUM (German Society of Ultrasound in Med-icine) to ultrasound specialists. Home-monitoring by hand-held Doppler is a promising new approach. With the intention to evaluate practicability, we instructed pregnant women at risk to use hand-held Doppler in the vulnerable period between 18-26 weeks at our university center.

Small ruminant lentivirus (SRLV) are infected and transmitted among ovine and caprine species. This disease is a severe problem for small ruminant production, not only for animals’ wellbeing but also for the herd’s efficiency. The main aim of this research was to quantify the seroprevalence and associated risk factors for SRLV infection in the north region of Portugal. Collected samples from a total of 150 herds, of which 129 (86.0%; 95% CI: 80.67% - 91.33%) had at least one seropositive animal. Out of 2607 individual blood samples, 1074 (41.2%) were positive for SRLV. The risk factors associated with SRLV infection were: specie (caprine), age (&gt; 2 years old), herd size (&gt; 100 animals), production system (intensive), production aptitude (milk), type of activity (professional), participation in livestock competitions (yes), buy replacement young ewe (yes) and rearing (natural). This knowledge empowers the implementation of effective preventive measures. Overall, biosecurity measures should be promoted and implemented to aim reducing viral transmission, with the main goal of reducing the prevalence of this disease. Completely, we understand that government authorities should promote and audit voluntary control and eradication programs in small ruminant herds in the region studied.

The regulation of multiple bacterial phenotypes was found to depend on different cyclic di-nucleotides (CDNs) that constitute intracellular signalling second messenger systems. Most notably, c-di-GMP, along with proteins related to its synthesis, sensing and degradation, was identified as playing a central role in the switching from biofilm to planktonic modes of growth. Recently, this world has been under expansion, with the discoveries of other signalling CNDs in bacteria (c-di-AMP and cGAMP) and also in eukaryotes, novel protein and RNA receptors of CDNs, and the numerous functions related to these molecules. In this work, we comprehensively review and analyse the structural biology data about the systems that bacteria use to synthesise and recognise CDNs, detailing their interactions at molecular level with their products/ligands. Additional interesting observations were made, including that different receptor types can bind CDNs in similar conformations and that, based on genomic data, different CDN second messenger systems may coexist in many organisms. The large amount of sequence and structural data available allows a broad view of the importance of CDNs in bacteria, but how cells coordinate these molecules to ensure adaptation to changing environmental conditions is still open for much further exploration.

This study investigates the application of regression neural networks, in particular the fitrnet model, in predicting the hardness of steels. The experiments involve extensive tuning of hyperparameters using Bayesian optimization and employ 5-fold and 10-fold cross-validation schemes. The trained models are rigorously evaluated, and their performances are compared using various metrics such as mean square error (MSE), root mean square error (RMSE), mean absolute error (MAE), and coefficient of determination (R2). The results provide valuable insights into the effectiveness of the models and their ability to generalize to unseen data. In particular, Model 4208 (8-85-141-1) emerges as the top performer with an impressive RMSE of 1.0790 and an R² of 0.9900. The research paper contains an illustrative example that demonstrates the practical application of the developed model in determining the hardenability band for a specific steel grade and shows the effectiveness of the model in predicting and optimizing heat treatment results.

Acne vulgaris is a prevalent dermatological disorder that impacts the quality of life for millions of people around the world. The multifactorial nature of this disorder requires innovative and effective treatment strategies. Over time, there has been a growing interest regarding the use of natural topical therapies, with cannabinoids emerging as a promising group of compounds for investiga-tion. In the context of acne treatment, cannabinoids are of particular interest due to their anti-acne properties, namely, lipostatic, anti-inflammatory, antiproliferative, and antimicrobial activities. Among these bioactive compounds, cannabidiol stands out as a notable derivative, exhibiting a promising spectrum of therapeutic actions. Pre-clinical and clinical studies have proven its ability to modulate sebum production, reduce inflammation, and inhibit bacterial proliferation - all of which are critical components in the pathogenesis of this dermatosis. This review provides a comprehen-sive overview of cannabinoids' potential as a novel and holistic approach to acne vulgaris treatment and summarizes recent developments in this area.

This paper makes a theoretical contribution by exploring the integration of sustainability principles into project management. It compares two recent methodologies, PM² and PRiSM^TM, and provides a practical contribution by advocating for the adoption of these sustainability-driven practices among practitioners. Sustainability remains relatively unknown in the realm of project management, and this research aims to bridge that gap. The study follows an interpretivist philosophy and employs a combination of interviews and archival data analysis. PM², created by the European Commission, provides a project management methodology free to organizations and includes best practices from other bodies of knowledge. However, it doesn't include sustainability, because it aims to be generic. PRiSM^TM, based on the P5™, aims to make the project management process more sustainable. PRiSM^TM has P5 Impact Analysis and Sustainability Management Plan as the main differentiating deliverables and is an extension of the Triple Bottom Line, also including product and process. The PM² Alliance CEO believes that PM² aims to be generic, so a focus on sustainability would remove the methodology's "elasticity". However, users wishing to use PM² and consider sustainability can include it in the additional objectives and use PRiSM^TM differentiating deliverables.

The combination of calcium phosphates (CaP) with bioactive glasses (BG) has received an increased interest in the field of bone tissue engineering. In the present work, biphasic calcium phosphates (BCP) obtained by hydrothermal transformation (HT) of cuttlefish bone (CB) were coated with a Sr-, Mg- and Zn-doped sol-gel derived BG. The scaffolds were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The initial CB structure was maintained after HT and the scaffold functionalization did not jeopardize the internal structure. The results of in vitro bio-mineralization after immersing the BG coated scaffolds in simulated body fluid (SBF) showed extensive formation of bone-like apatite onto the surface of the scaffolds. Overall, the functionalized CB derived BCP scaffolds revealed promising properties for their use in bone tissue engineering field.

In this research paper we describe the development phase of a low-cost LoRa IoT solution applied to a kindergarten school with three years results. A set of sensors solution was developed in a LoRa communication board, battery powered, providing a simplified setup process. These sensors were used in order to measure temperature, humidity, luminosity, air quality and presence. Also, energy monitor solutions were integrated. The acquired data is transmitted and analysed for knowledge extraction, identifying savings and other related KPIs. From data, automatic saving actions were performed towards heating and cooling systems, lighting and a set of if-then actions were developed for automatic cost-saving actions, based on infrared signals to heating/cooling systems using some procedure of external command devices. This approach avoids the usage of proprietary vendor solutions in a flexible approach that can easily be deployed to any building facility. This is an important achievement since most of the building consumption is based on heating and cooling systems. In a three years test of the solution, the total energy consumption savings surpassed 20%

Like other organisms, fungi produce extracellular vesicles (EVs) that are involved in various biological processes, including intercellular communication and the transport of molecules between cells. These EVs can be applied in fungal pathogenesis, virulence, and interactions with other organisms, including host cells, in the case of fungal infections. While some types of mycoses are relatively common and easily treatable, certain neglected mycoses pose significant public health challenges, such as sporotrichosis, chromoblastomycosis, and paracoccidioidomycosis. These infectious diseases can cause significant morbidity and disability, leading to a reduced quality of life for the patients. So, research about the virulence factor is essential to understand how fungi escape the immune system. In this context, this manuscript reviews the study of fungi EVs, their cargo, their obtaining, and their role during the infectious process, which is extremely important for understanding this neglected mycosis.

With the continuous growth of electric and electronic appliances’ usage, the waste produced with obsolete material (e-waste) has an increasing environmental impact. Also, the production of such appliances bears to increased consumption of natural resources and produces a multitude of toxic and hazardous substances, which typically are not properly treated. One of the approaches that may be adopted to reduce such problems relies on the circularization of the current linear model, commonly adopted in the EEE value chain. This includes recovering eol products and reintroducing its parts, components, or raw materials into the value chain (e.g. semiconductors, circuit boards, raw metals, etc.), thus contributing to a more sustainable value chain. In this article, we present a state-of-art review that focuses on approaches and solutions for the EEE value chain traceability, and analyses the technologies that may be beneficial for promoting and implementing the CE model in this value chain.

In recent years, many studies have reported that several distinct families of transcription factor (TF) genes play crucial roles in the response of plants to abiotic stress. Although some of these families got systematically studied in many species, little knowledge exists about these genes in oil palm (Elaeis guineensis Jacq.). In this study, 20 genes differentially expressed in the leaves of oil palm plants subjected to salinity or drought stress and encoding TFs belonging to four families of TFs - MYB, HD-ZIP, NF-Y, and HSFF - got selected for further characterization. The genes underwent a structural and functional annotation, besides having their RNA-Seq expression profile validated by the qPCR technique, and a correlation analysis of their response under both stresses got performed. The annotation analysis of the promoter region showed the presence of seven cis-acting elements, all already reported to be involved in plants' response to abiotic stress. The structural and functional characterization of the proteins encoded by the selected genes showed that some groups present patterns of conserved regions and are orthologs to genes already linked to salinity or drought resistance in other plant species. It was possible to confirm the RNA-Seq expression profile of 19 genes, only gene 4 showed the opposite response when using qPCR. Through correlation analysis, it was possible to observe a high level of similarity in the behavior of the 20 genes in response to drought or salinity stress, a behavior already reported in other species. The results presented here shed light on the role of 20 TFs in the leaves of young oil palm plants under severe levels of soil salinity or water deprivation. The high level of similarity in the molecular response to both stresses allowed the identification of genes that might grant strategies aiming to develop oil palm plants with a tolerance to both salinity and drought at once.