NUMMI was one of the most analyzed case studies in terms of joint ventures, management dysfunction, and international globalization. NUMMI is an acronym for New United Motor Manufacturing, Inc. This manufacturer was a joint venture between automotive US titan GM and Toyota of Japan. GM wanted to further monetize its Fremont factory, but also had limited opportunities during a US economical recession. Toyota wanted to expand manufacturing operations in the US for the very first time, creating an intriguing collaborative partnership between the two. However, various problems lead to dysfunction through cultural, organizational, or managerial differences. This case study is analyzed through its historical analogical scope, ultimately leading to hypothesizing remediation through an ethical data-driven and total quality management (TQM) approach.

Background: The present study was carried out to evaluate the roles of proliferation and angiogenesis in locally aggressive biologic behavior of ameloblastoma versus ameloblastic fibroma; Methods: 30 formalin-fixed paraffin embedded blocks (15 cases of ameloblastoma & 15 cases of ameloblastic fibroma) were used. To evaluate the proliferation, the tissue sections were stained with AgNORs stain. CD105 was used as immunohistochemical marker of angiogenesis. Quantitative evaluations of AgNORs were performed. The mean vascular density was evaluated as a measure for CD105 protein expression by using image analyzer computer system; Results: The mean number of AgNORs dots per nucleus was significantly higher in ameloblastoma as compared to ameloblastic fibroma. Also, the protein level of CD105 showed positive expression and wide distribution that the mean vascular density was significantly higher in ameloblastoma as compared to ameloblastic fibroma; Conclusion: Quantitative evaluation of AgNORs stain & the mean vascular density utilizing CD105 protein expression may reflect a higher proliferative activity and a more locally aggressive biologic behavior of ameloblastoma when compared to ameloblastic fibroma, that other factors may be involved in biologic behavior of ameloblastic fibroma.

The effect of hybrid carbon fillers of multi-walled carbon nanotubes (CNT) and carbon black (CB) on the electrical and morphological properties of polystyrene (PS) nanocomposites were systematically investigated in microinjection molding (μIM). The polymer nanocomposites with three different filler concentrations (i.e. 3, 5 and 10 wt%) at various weight ratios of CNT/CB (100/0, 30/70, 50/50, 70/30, 0/100) were prepared by melt blending, then followed by μIM under a defined set of processing conditions. A rectangular mold insert which has three consecutive zones with decreasing thickness along the flow direction was adopted to study abrupt changes in mold geometry on the properties of resultant microparts. The distribution of carbon fillers within microparts was observed by scanning electron microscope, which was correlated with electrical conductivity measurements. Results indicated that there is a flow-induced orientation of incorporated carbon fillers and this orientation increased with increasing shearing effect along the flow direction. High structure CB is found to be more effective than CNT in terms of enhancing the electrical conductivity, which was attributed to the good dispersion of CB in PS and their ability to form conductive networks via self-assembly. Morphology observations indicated that there is a shear-induced depletion of CB particles in the shear layer, which is due to the marked difference of shear rates between the shear and core layers of the molded microparts. Moreover, an annealing treatment is beneficial to enhance the electrical conductivity of CNT-containing microparts.

(1) Background: The present study was carried out to provide new information about the relation between angiogenesis, tumor stage Oral squamous cell carcinoma (OSCC); (2) Materials and methods: Thirty formalin-fixed paraffin embedded blocks were used, 10 of them were previously diagnosed as well differentiated OSCC, 10 moderate differentiated OSCC and 10 poorly differentiated OSCC. To determine the expression of CD31 and D2-40 proteins, streptavidin-biotin immunoperoxidase staining technique was used. The areas with the most vascular density (hot spots) were determined. The stained vessels were counted independently in intratumoral and peritumoral stroma in five areas of hot spot at ×400 magnification; (3) Results: Immunohistochemical staining using CD 31 protein showed that CD31-positive vessels in the peritumoral and intratumoral stroma subjacent to the malignant invading nests which was recorded highest values in poor differentiated OSSC followed by moderate differentiated OSSC then well differentiated OSSC. D2-40 expression was positive in lymphatic vessel in the peritumoral and intratumoral stroma subjacent to the malignant invading nests. Poorly differentiated OSSC tissue sections recorded the highest vessels count followed by moderate differentiated OSSC then well differentiated OSSC. There was statistically significant difference found between the three studied groups regarding CD31 and D2-40 levels. Also there was statistically significant positive correlation found between CD31 level and D2-40 level and vice versa; (4) Conclusion: CD31 and D2-40 are related to stage of OSCC and are consistent with angiogenesis in tumor progression.

Objectives: The present study was performed to compare between two different fixation techniques and evaluate the histopathological changes which occur in temporomandibular joint (TMJ) of the dogs after surgically induced unilateral subcondylar fracture. Methods: Twenty- One healthy beagle male dogs with a mean age of 30 months were used in the present study. One of these animals was sacrificed to study the normal histology of the dog TMJ. The rest of the animals (20 animals) were operated on to induce a displaced unilateral subcondylar fracture then, the animals were randomly equally divided into 2 groups. After surgery, 5 dogs of each group were sacrificed at 2 months after surgery (Short-Term), while the remaining 5 were sacrificed at 4 months after surgery (Long-Term). The heads were separated and fixed, oscillating saw was used to articulate the entire TMJ. Specimens were decalcified, then the specimens were washed, grossed and sectioned in a sagittal plane. Tissue sections of 4 um thick were cut and stained with Hematoxylin and Eosin to be studied microscopically. Results: In group I animals, at 2 months after surgery, there was a marked hypertrophy of the articular fibrous covering of the condylar head, while at 4 months after surgery, the articular fibrous covering appeared thinner than normal, with marked decrease in thickness of the articular cartilage layer. In group II, at 2 months after plate insertion, the articular fibrous covering became hypertrophic, and the articular cartilage was markedly reduced but it was of a uniform thickness, while at 4 months after subcondylar fracture and plate fixation, no significant changes could be detected either in thickness or structure of the articular fibrous covering. Conclusion: Based on this study, it is obvious that the plate fixation group gave the most favorable results, when compared with maxillomandibular fixation (MMF) group.

The purpose of the current study was directed to investigate the effectiveness of docosahexaenoic acid (DHA) as a chemopreventive agent on experimentally induced hamster buccal pouch (HBP) carcinogenesis; Material and methods: 40 Syrian male hamsters, five weeks old, were divided into 4 groups of 10 animals in each as follows, GI: Topical application of liquid paraffin alone (thrice a week for 14 weeks), GII: Topical application of 7, 12 dimethyl benz[a]anthracene (DMBA) alone (0.5 % in liquid paraffin, thrice a week for 14 weeks), GIII: Topical application of DMBA (0.5 % in liquid paraffin, thrice a week for 14 weeks) + Oral administration of DHA (125 mg/kg b.w. in 1 ml distilled water by oral gavage, thrice a week for 14 weeks on alternative days of DMBA application), GIV : Oral administration of DHA alone (125 mg/kg b.w. in 1 ml distilled water by oral gavage, thrice a week for 14 weeks); Results: Gross observations and histopathological findings revealed a-GI: normal stratified squamous epithelium b- GII: well and moderately differentiated squamous cell carcinoma (SCC) c-: GIII: showed variable results ranges from hyperkeratosis, hyperkeratosis and focal hyperplasia, mild dysplasia, and well differentiated SCC with superficial invasion of tumor cells not extended to deeper areas d: GIV: normal similar to GI. Immunohistochemical results revealed that oral DHA treatment to DMBA treated hamsters restored the normal expression of bcl-2; Conclusion: DHA has the potential to be a dietary chemopreventive agent due to its capacity to improve carcinogen detoxification and to block/suppress the initiation and promotion stages of experimentally produced HBP carcinogenesis.

Asphalt cement will not last for a long time as the world encounters a diminishment in the crude oil. For sustainable, flexible pavement development, new resources can provide a contribution to replace it partially or entirely. In this study, asphalt was partially and entirely replaced by guayule resin as a bioresource by-product, extracted during the guayule natural rubber production. Crumb rubber modifier (CRM) was used as an asphalt enhancer. The Superpave grading system was followed at high, intermediate, and low temperatures to evaluate such innovative binder for rutting, fatigue, and thermal cracking, respectively, in addition to viscosity. Therefore, the original, short-term aging and long-term aging were simulated using tank, rolling thin film oven, and pressure aging vessel materials. Additionally, component analysis using Fourier-transform infrared spectroscopy was provided to link the rheological properties with the chemical changes. Outcomes showed a relatively much lower viscosity of guayule in the same high-temperature asphalt grade indicating savings in plant energy consumption and reduced environmental emissions. CRM enhanced guayule, but not as much as asphalt, proven by polymeric component migration through liquid binder. This enhancement was reflected in the rheological performance besides other factors. As-received guayule seems to have high oxygen content proven by strong absorption peak intensities of oxidative bonds (e.g., Carbonyl and sulfoxide). Such pre-oxidation was negatively reflected in the intermediate- and low-temperature performance of guayule and guayule-based binders. However, the investigated guayule had potential to compensate for asphalt replacement in the presence of CRM by 23–42% by weight of blend.

This research seeks to interpret the component analysis of an innovative bio-asphalt binder using guayule resin in addition to crumb rubber modifier (CRM) at high concentrations. Such asphalt modification aims to minimize the dependency on virgin asphalt binder and provide new solutions concerning sustainable, flexible pavement industry. Guayule resin is a promising bioresource for asphalt binder replacement. By now, it could be considered a no value byproduct extracted during the guayule natural rubber production. CRM is a recycled material derived from scrap tires. The provided interpretation could help in understanding the asphalt-rubber-guayule interaction mechanism. Fourier transform infrared spectroscopy (FTIR), supported by thermo-gravimetric analysis (TGA), was used to investigate the component analyses of guayule resin composition, asphalt guayule interaction, and asphalt rubber guayule interaction, compared to corresponding asphalt rubber interaction. Additionally, the rheological properties at elevated temperatures were provided to link the microscale properties with the final product performance. The study clarified the distinct carbon and hydrogen compositional elements of guayule resin. Asphalt and guayule resin have similarities in chemical composition and rheological behavior with temperature susceptibility. The asphalt guayule binder had physical interaction. However, when both interacted with rubber, a chemical interaction was attributed, with no difference in rubber dissolution tendency, in asphalt rubber guayule, compared to asphalt rubber. A bio-binder composed of 62.5% asphalt, 25% guayule and 12.5% CRM had the potential to provide rheological properties better than base asphalt. Such behavior was interpreted by a high release of rubber components.

Literature revealed the potential of using guayule resin for asphalt cement replacement from the binder’s perspective. However, monitoring guayule resin through binder-aggregate mixture could disclose its performance through field. In this study, designated binders were employed to investigate the applicability of such an innovative replacer through mixture, which were neat asphalt and guayule-based binders (neat guayule, asphalt-rubber-guayule, guayule-rubber binders). Consecutively, field-simulated lab mixtures were prepared to investigate the major distresses. Moisture damage, rutting, fatigue cracking, and thermal cracking resistances were investigated using the modified Lottman (TSR) test, rut test by asphalt pavement analyzer (APA), semi-circular bending (SCB) test, and disk-shaped compact tension (DCT) test, respectively. Additionally, the Hamburg wheel-tracking (HWT) test was employed to evaluate moisture susceptibility and rutting resistance. Outcomes revealed that the neat guayule was susceptible to moisture damage at a 7% air content (V_a) when the TSR test was employed. In contrast, all investigated mixtures yielded perfect performances against moisture susceptibility under the HWT test. Guayule-based mixtures perfectly resisted rutting, as analyzed by the rut test and HWT test. Generally, changing parameters (e.g., V_a, rubber addition, and partial asphalt replacement by guayule and rubber) enhanced the guayule-based mixture resistance to rutting and moisture damage resulting in acceptable performances. Guayule-based mixture had a high fracture toughness at low temperatures, hence fatigue fracture resistance at intermediate temperatures. Neat guayule mixture with or without rubber addition did not entirely resist thermal fracture. However, partial asphalt replacement by guayule and rubber resisted the thermal fracture to a great extent.

Asphalt binder requires more investigation to be accurately and precisely extracted since it is a significant procedure for quality control quality assurance (QC/QA) and subsequent binder characterization. In this research, the authors provided a hands-on experience with binder extraction to deliver recommendations concerning the sensitive steps that may affect the outcomes (extracted binder content, P_be%). Based on the extraction by the centrifuge method, two mineral matter determination methods (ashing and centrifuge) were addressed. Field cores were investigated with comparing the P_be% to the actual binder content, P_ba%. Analysis of variance (ANOVA) and Tukey Post-Hoc statistical analyses, in addition to linear least square regression analysis, were used to show the significance of difference according to 38 variant cores randomly obtained from the field segments (in-service roads) via the first two weeks from the construction date. Such cores involved reclaimed asphalt pavement (RAP), reclaimed asphalt shingles (RAS), and a wide range of additives. The two extraction methods were compared with concluding that the centrifuge method was highly recommended based on a quantitative evaluation, which delivered the same average P_ba% based on the 38 cores. Furthermore, the centrifuge method provided much saving in the experimental time (almost half the time required for the ashing method). It was found that the ashing outcomes were equal to the centrifuge outcomes with disregarding the ammonium carbonate addition. Thus, it could be recommended to reassess the ammonium carbonate addition as it might excessively compensate for fake minerals that have not been lost by the ignition oven.

(1) Background: This manuscript introduces the "Lines and Dots" (LAD) technique, a novel method for administering Botulinum Toxin Type A (BoNT-A) in treating horizontal forehead lines. This technique emphasizes precision in targeting nerve endplates, considering individual anatomical variations, and optimizing treatment efficacy. (2) Methods: The LAD technique focus on using the frontalis muscle contraction dynamics to identify the specific distribution of the supraorbital and supratrochlear nerves It involves creating a grid of predetermined lines and points on the forehead that align with nerve paths and motor endplate zones. (3) Results: By targeting injections along these precise lines and points, the LAD technique ensures more effective utilization of BoNT-A. This approach not only enhances the toxin's effect but also allows for a reduction in the overall dosage. The strategic placement of injections results in a more natural, symmetrical, and sustained therapeutic effect, ensuring an improved aesthetic outcome. (4) Conclusions: The LAD technique represents a significant advancement in the realm of cosmetic injectables. It offers a tailored, patient-specific approach, maximizing the effectiveness of BoNT-A injections for treating forehead lines while minimizing risks and enhancing patient satisfaction. This method underscores the importance of a deep anatomical understanding and precision in cosmetic procedures.

This study investigated the relationship between aluminum adjuvant vaccines and the prevalence of 4 childhood diseases (Autism, Allergies, Asthma, ADD/ADHD) using data from the 2020-2021 National Survey of Children's Health (NSCH) [1] and the Centers for Disease Control National Immunization Survey (CDC NIS) [2]. The study found an association with aluminum adjuvant dosage and the prevalence of each disease studied (Autism, Allergies, Asthma, ADD/ADHD) through a weighted regression analysis of disease prevalence against the summed likelihood of aluminum adjuvant vaccine uptake.

One of the most important objectives of the studies worldwide is to improve the performance of automotive engines to reduce fuel consumption and environmental pollution. Accordingly, the principal motivation of this research study is improving the tribological behavior of the piston ring/cylinder liner interfaces as a promising and straightforward approach in automotive fuel economy and increasing engine durability using Al₂O₃ and TiO₂ nanomaterials as smart nano-lubricant additives that adapted to different operating conditions by replenishing mechanisms anti-friction and anti-wear in automotive engines.

Meningitis is a severe disease associated with death in children under five with highest rates of infections under age of one. Vaccines for Neisseria meningitides and Haemophilus influenza are used to prevent the main causative agents of meningitis. Administration of H. influenzae type b (Hib) vaccine is recommended at 2, 4 and 6 months with a booster dose at 18 months. N. meningitidis has two commercially available vaccines, the pure polysaccharide is recommended at 24 months meanwhile the protein-conjugated vaccines at 12 months. We sought in this study to examine if coadministering the vaccines for the two main meningitis causing bacteria might be synergistic as a preliminary step towards the possibility of shuffling immunization schedule. So, we coadministered Hib vaccine with commercially available vaccines either quadrate (ACWY) polysaccharide meningococcal (Men) or conjugated meningococcal (Nim) vaccines in Balb/C mice (n = 6/group) and compared to each vaccine administered separately and controls. Thirty-five days post immunization, we measured specific antibodies titers. Hib vaccine increased Men antibody titers significantly for serotypes Y and W. When Hib vaccine was coadministrated with Nim, antibody titer for Y, W and A significantly increased. For serotype C, there was no significant difference in antibody titers among immunized groups. As for effect of meningococcal vaccines on Hib, Men significantly increased Hib antibody titers while Nim had no effect. Collectively, our data suggested that coadministration of Hib and Men or Nim vaccines was safe and had synergistic effect on immune responses elicited to both vaccines. Further studies are needed before immunization schedule modifications. Such immunization schedule recommendation should provide better protection against this life-threatening disease in young children.

According to architectural standards, the common proportion of a rectangular-shaped classroom is the shallow proportion, which has a longer external room facade versus the perpendicular internal sides. Even in the Kingdom of Saudi Arabia (KSA), the same proportion is used in school projects. Environmentally, this proportion is logical when considering the role of adequate natural lighting for classroom visual functions, which could be more easily achieved if its longest side is the external one. But, the environmental efficiency of any architectural space cannot be only judged according to a single human comfort achievement, especially with the diverse environmental characteristics of places around the world. This diversity can show a defect in other human comfort achievements or other environmental issues in different ways when achieving a certain function in a unified way. A holistic study should be done for any common architectural shape or proportion to ensure their priority among other options in achieving maximum green architectural principles for a specific location before confirming and using it. The manuscript compares a rectangular classroom of different external/internal wall proportions to search for their preference to be used in Taif city schools in KSA. The compared case studies have different window variations and similarities to include their effect too. According to the overall green principles assessment, the results showed that the common proportion of classrooms didn’t give the higher green credits, which alerts us that the traditional rectangular classroom proportion is not always optimum for all regions including Taif city in KSA.

We are living in a world where people always strive for the luxuries they can get with less hard work and for these smart systems are developed and established all over the world to make life easier for the people. However, in Pakistan being a third-world country we are unable to achieve better results due to the lack of proper transit from one area to another. Sometimes the roads are not in their optimum conditions and hence people have to face a lot of problems while traveling. In urban areas, people cannot reach their destination in time, in some cases, they damage their vehicles due to the cracks on the roads, in medical emergency patient dies most of the time in their transit from rescuing point to the hospital. Similarly, in rural areas where farmers face countless problems while bringing their yield of the season towards the markets. Therefore, having described the severe damage the bad quality of roads is making. A solution is proposed to solve the problems of both the rural and urban population in our project. The project aims to provide the solution to their problem to a certain extent by monitoring the conditions of the roads. The sensors in the system will calculate the values and send them to the cloud server. The cloud server used is the blynk platform where the data will be stored. Moreover, data can be provided to the government in the future for the timely maintenance of the roads, and hence the citizens and lifestyle of the people will be changed. It is expected that the problems of both urban and rural population will be solved to a greater percentage.

As abiotic stress, drought limits plant growth and minimizes productivity. The increased request for valuable essential oil extracted from geranium (Pelargonium graveolens L.) is mainly associated with plant growth, which is adversely affected by drought. Melatonin (MT) has been used to enhance plant growth under abiotic stress, however, its impact to overcome drought stress of aromatic plants including geranium is poorly investigated. In the current investigation, MT application at 100 µM was applied under 100 % (well-watered) or 50 % (drought stress) of FC to verify this role. Drought stress markedly reduced growth parameters, herb yield, and total chlorophyll; however, MT alleviated these effects. In contrast, drought enhanced the essential oil percentage in geranium leaves. Despite the reduction in oil yield caused by drought, MT application mitigated this reduction and improved both oil yield and oil components. Besides, MT treatment enhanced the accumulation of total phenols, glutathione, and proline and improved the activity of ascorbate peroxidase, catalase, and glutathione reductase with possible alleviation of drought-induced oxidative damage. Therefore, it reduced both H2O2 and malondialdehyde accumulation, and finally maintained membrane integrity. Overall, this is the first report that reveals that MT application can improve geranium resistance to drought by enhancing the antioxidant potential and protecting the cell membrane from oxidative damage.

The usage of Quantum Similarity through the equation Z = {∀θ ∈ Z → ∃s ∈ S ∧ ∃t ∈ T : θ = (s, t)}, represents a way to analyze the way communication works in our DNA. Being able to create the object set reference for z being (s, t) in our DNA strands, we are able to set logical tags and representations of our DNA in a completely computational form. This will allow us to have a better understanding of the sequences that happen in our DNA. With this approach, we can also utilize mathematical formulas such as the Euler–Mascheroni constant, regression analysis, and computational proofs to answer important questions on Quantum biology, Quantum similarity, and Theoretical Physics.

Conventional data visualization software have greatly improved the efficiency of the mining and visualization of biomedical data. However, when one applies a grid computing approach the efficiency and complexity of such visualization allows for a hypothetical increase in research opportunities. This paper will present data visualization examples presented in conventional networks, then go into higher details about more complex techniques related to leveraging parallel processing architecture. Part of these complex techniques include the attempt to build a basic general adversarial network (GAN) in order to increase the statistical pool of biomedical data for analysis as well as an introduction to the project utilizing the decentralized-internet SDK. This paper is meant to show you said conventional examples then go into details about the deeper experimentation and self contained results.

Analysis of Fatigue Strain, Fatigue Modulus and Fatigue Damage for the modeling of concrete plays a vital role in the evolution material behaviour which is heterogeneous and anisotropic in nature. In this paper, the Level-S nonlinear fatigue strain curve, fatigue modulus curve, residual strain curve of concrete in compression, tension, flexure and torsional fatigue loading were proposed using strain life approach. The parameters such as physical meaning, the ranges, and the impact on the shape of the curve were discussed. Then, the evolution model of fatigue modulus was established based on the fatigue strain evolution model, fatigue modulus evaluation model, residual strain evaluation model, secondary strain evaluation model. The hypothesis of fatigue modulus is inversely related with the fatigue strain amplitude. The fatigue evolution of concrete damages the bond between material grains, changed the orientation of structure of molecules and affects the elastic properties resulting in the reduction of material stiffness and modulus by utilizing strain life analysis, regarding stiffness degradation and inelastic deformation by formation of microcracking, macro cracking, cracking which is heterogeneous and anisotropic in nature . This paper presents the Fatigue Strain Life Model and analyses of fatigue strain, fatigue modulus and damage parameters of concrete which is capable of predicting stiffness degradation, inelastic deformation, strength reduction under fatigue loading. Hence, the obtainable results were compared with experimental results for the validation of the proposed model.

Objectives: To determine the effects of caffeine consumption on the sleep habits and lifestyle of medical students. Methods: A cross-sectional study was conducted at Jinnah Sindh Medical University (JSMU) and Hamdard College of Medicine. On 422 undergraduate students aged 18-25 years, through random sampling. The duration of the study was from January 2019 to June 2019. The data was collected through self-administered questionnaire which included data regarding sleep habits and lifestyle of medical students. Results: Majority (81.6%) of the students consumed caffeine while only (18.4%) did not. One third of the participants (31.8%) reported caffeine consumption increased their academic performance and (57.3%) reported that it does not. More than half of the participants (63.3%) who consumed caffeine slept during class, whereas (47.2%) never had difficulty in falling asleep during the night. Conclusion: This research concluded that caffeine does have some role on sleep habits of medical students as they tend to have less sleep hours, experience day time dysfunction, average quality of sleep, and falling asleep during class. It has been concluded that caffeine has no effect on eating habits of medical students however, it does increase the screening time, keeping them active.

Background: As long-lived organisms, urban trees often encounter development and redevelopment activities in close proximity during their lifespans. These activities can damage tree roots, often through methods like root severing during trenching or excavation. Methods: In 2017, we simulated trenching damage on mature Quercus virginiana Mill. trees at three different distances from the base (3x, 6x, and 12x the stem diameter). After five years, we revisited these trees to assess root regrowth based on the cut root's cross-sectional area (CSA) and distance from the base. Results: We observed regrowth in all but 38 (6.7%) of the 557 cut roots revisited. The lack of regrowth in some roots was not associated with our original treatments, the CSA of the roots at the time of trenching, or distance between the cut root end and the trunk (minimum P-value = 0.841). On average, the observed CSA of the regrowth was 22.2% of the original root's CSA. Only our original trenching treatments significantly predicted the level of regrowth observed five years after pruning (P-value = 0.024). Discoloration due to root pruning was minimal. Conclusion: In summary, our findings indicate that root systems require many years to recover from trenching damage. Increasing the distance between trenching activities and trees may have a minor effect on root regrowth but primarily helps reduce initial stress on the tree.

Few prior works study self-driving cars by deep learning with IoT collaboration. SDC-Net, which is an end-to-end multitask self-driving car camera cocoon IoT-based system, is one of the research that tackles this direction. However, by design SDC-Net is not able to identify the accident locations, it only classifies if it is a crash scene or not. In this work, we introduce an enhanced design for the SDC-Net system by 1) replacing the classification network with a detection one, 2) adapting our benchmark dataset labels built on the CARLA simulator to include the vehicles bounding boxes while keeping the same training, validation, and testing samples, 3) modifying the shared information via IoT to include the accident location. We keep the same path planning and automatic emergency braking network, the digital automation platform, and the input representations to formulate the comparative study. SDC-Net++ system is proposed to 1) output the relevant control actions, especially in case of accidents: accelerate, decelerate, maneuver, and brake, and 2) share the most critical information to the connected vehicles via IoT, especially the accident locations. A comparative study is also conducted between SDC-Net and SDC-Net++ with the same input representations: front camera only, panorama and bird-eye views, and with single-task networks: crash avoidance only, and multitask networks. Multitask network with a BEV input representation outperforms the nearest representation in precision, recall, f1-score, and accuracy by more than 15.134%, 12.046%, 13.593%, and 5%, respectively. SDC-Net++ multitask network with BEV outperforms SDC-Net multitask with BEV in precision, recall, f1-score, accuracy, and average MSE by more than 2.201%, 2.8%, 2.505%, 2%, and 18.677% respectively.

Listwaenite rocks are widely spread in Fenja area of the Semail ophiolite of Oman and in Islam Abad area of the Neyriz ophiolite of Iran. There are three types of listwaenites found in these regions: silica-, carbonate-, and carbonate-silica (which includes dolomite, calcite, and magnesite. The alteration of host harzburgites started with hydrothermal alteration to serpentinite, followed by carbonation and silicification of serpentinite. Calcite- and magnesite-dolomite- listwaenites are more abundant in the Fenja area of Oman, while dolomite-listwaenites are more abundant in Islam Abad area in Iran. The mineralogy of listwaenites varies in both Iran and Oman; common minerals include quartz, calcite, goethite, magnesite, dolomite, serpentine, hematite, magnetite, Cr-mica, and Cr-spinel The major element chemistry of the different types of listwaenites in both Fenja and Islam Abad area generally comparable, and is largely similar to that of hydrothermally carbonated harzburgites, serpentinite, and listwaenites worldwide, despite spanning extraordinary and highly variable contents in major oxides, such as CaO, SiO2, MgO and LOI. Relict texture and common occurrence of Cr-spinel as well as the high concentrations of Cr, Ni and Co suggest that the protolith of the listwaenites in both regions was serpentinized harzburgites and serpentines. In comparison to the primary mantle and chondrite in spider diagrams, the Neyriz listwaenites have higher trace and REE element abundances than comparable listwaenites in the Fenja region. Harzburgite-normalized patterns of trace elements and REE in serpentinite and listwaenites overlap the average composition of harzburgite. PM-normalized trace element and REE patterns for serpentinized harzburgite and serpentinite show enrichment in Cs, U, Pb and Sr, with no Eu anomaly, comparable to mantle wedge serpentinites. The variable and high abundances of Ca, Mg, Ba, Zr, Sr, Pb, Zn, Mo and W in the carbonate- and silica-carbonate listwaenites, with unique Si enrichment and Mg, Na2O, Zr, Y, Ba, Sr, Rb, Cu, Pb, Sc, Cs, Nb, Mo and W. depletion in silica listwaenites are indicative of large fluctuations in major and trace element mobility. Cr, Ni and Co were immobile during alteration Enrichment in Ca and Si could occur by internal or late outside supply. Ca, Mg and Si are conceivably the foremost mobile major components amid harzburgite and serpentinite carbonation with mobilization confirmed by formation of quartz and Mg-carbonate in silica-carbonate listwaenites and quartz in silica listwaenites. The listwaenites in Islam Abad and Fenja area were formed due to hydrothermal alteration of serpentinite along thrust faults and shear zones which acted as pathway for Ca and/or Si rich fluids. The intensity of deformation in Islamabad listwaenites has been higher than Fenja listwaenites as indicated by higher abundance of trace elements.

High seismic activity in the Himalayas and the increasing urbanization of its surrounding areas in the northern Indian region pose significant threats to both lives and properties. To mitigate the risk of seismic events, an earthquake early warning system can be used in the region. This system would be particularly beneficial to cities and towns in the mountainous and foothill regions that are located near earthquake sources. The government and the science and engineering community have re-sponded to this call by establishing the Uttarakhand State Earthquake Early Warning System (UEEWS). The system became fully operational on August 4, 2021, after being launched by the government of Uttarakhand. The UEEWS includes 170 accelerometers in the seismogenic part of the Uttarakhand region of the Himalayas. Ground motion data is transmitted to a central server through a dedicated private telecommunication network 24 hours a day, seven days a week.The system is designed to issue warnings for moderate to high-magnitude earthquakes via a mobile application installed on users' devices and sirens installed in government-owned public buildings. The UEEWS has successfully issued alerts for light earthquakes that occurred in the instrumented region and warnings for moderate earthquakes that occurred in the vicinity of the instrumented area. This paper provides an overview of the design of the UEEWS, details of the instrumentation, adaptation of attributes and their relation to earthquake parameters, the operational flow of the system, and information about the dissemination of warnings

Plasma being the fourth and most abundant form of matter extensively exists in the universe in the inter-galactic regions. It provides an electrically neutral medium of unbound negative and positive charged particles, which has been produced by subjecting air and various other gaseous mixtures to strengthen the electromagnetic field and by heating compressed air or inert gasses for creating negative and positive charged particles known as ions. Nowadays, many researchers are paying attention to the formation of artificial Plasma and its potential benefits for mankind. The literature is sparsely populated with the applications of Plasma. This paper presents specific methods of generation and applications of Plasma, which benefits humankind in various fields, such as in electrical, mechanical, chemical and medical fields. These applications include hydrogen production from alcohol, copper bonding, semiconductor processing, surface treatment, Plasma polymerization, coating, Plasma display panels, antenna beam forming, nanotechnology, Plasma Torch, Plasma pencils, low-current non-thermal Plasmatron, treatment of prostate cancer, Plasma source ion implantation, cutting by Plasma, Plasma etching, pollution control, neutralization of liquid radioactive waste, etc. Resultantly, worth of Plasma technology in the medical industry is increasing exponentially that is closing the gap between its benefits and cost of equipment used for generating and controlling it.

Omics technologies, viz., genomics, transcriptomics, proteomics, metabolomics, and phenomics, are becoming an integral part of virtually every commercial cereal breeding program because they provide substantial dividends per unit time in both pre-breeding and breeding phases. Continuous advances in cereal-omics promise—in combination with time efficiency—the cost benefits. In this review, we provide a comprehensive overview of the established cereal-omics methods in five major cereals, viz., rice, sorghum, maize, barley, and bread wheat. We cover the evolution of technologies in each omics section independently and concentrate on their use to improve economically important agronomic as well as biotic and abiotic stress-related traits. Advancements in the (1) identification, mapping, and sequencing of molecular/structural variants, (2) high-density transcriptomics data to study gene expression patterns, (3) global and targeted proteome profiling to study protein structure and interaction, (4) metabolomic profiling to quantify organ level small-density metabolites and their composition, and (5) high-resolution high-throughput image-based phenomics approaches are surveyed in this review.

Failaka Island, located in the far east of Kuwait Bay, is about 20 km from the State of Kuwait’s coast, and represents a focal point for regional geography and history, with pristine beaches and archaeological sites dating to the Bronze, Iron, Hellenistic, Christian and Islamic periods. According to environmental data and in coordination with local authorities to develop an urban plan, the island is set to become the first tourist destination for the State of Kuwait. To achieve the Vision of Kuwait 2035, one of the planning objectives focuses around Urban Planning for the Establishment of Environmental Cities that Achieve (UPEECA) environmental sustainability criteria. The paper then, aims to propose the environmental urban plan for Failaka Island. Based around Environmental Analytical Hierarchical Processes (EAHP), and using the Field Calculator and ModelBuilder functions in ArcGIS, this research centres on the feasibility of carrying out an urban plan using suitability modelling that includes four factors and 13 criteria covering the island’s ecological and human composition. This study utilizes both remote sensing (UAVs for 3D imaging) and field study (ground truthing) to identify changes in land use and land cover – such as using sample analysis of the historical sites and soils for tracing evidence and creating/updating a soil map – and create the first GIS database for the island that can lead to generating a suitability model.

Acute kidney injury (AKI), especially if recurring represents a risk factor for future chronic kidney disease. In intensive care units, increased intraabdominal pressure is well-recognized as a significant contributor of AKI. However, the importance of transiently increased intra-abdominal pressures procedures is less commonly appreciated during laparoscopic surgery, the use of which has rapidly increased over the last few decades. Unlike the well-known autoregulation of the renal cortical circulation, medulla perfusion is modulated via partially independent regulatory mechanisms and strongly impacted by changes in venous and lymphatic pressures. In our review paper, we will provide a comprehensive overview of this evolving topic, covering a broad range from basic pathophysiology up to and including current clinical relevance. Key regulators of oxidative stress such as ischemia-reperfusion injury, the activation of inflammatory response and humoral changes interacting with procedural pneumoperitoneum formation and AKI risk will be recounted. Moreover, we present an in-depth review of the interaction of pneumoperitoneum formation with general anesthetic agents and animal models of congestive heart failure. A better understanding of the relationship between pneumoperitoneum formation and renal perfusion will support basic and clinical research, leading to improved clinical care and collaboration among specialists.

In this study, we introduce the dynamics of a Hepatitis B virus (HBV) model with the class of asymptomatic carriers and conduct a comprehensive analysis to explore its theoretical aspects and examine the crossover effect within the HBV model. To investigate the crossover behavior of the operators, we divide the study interval into two subintervals. In the first interval, the classical derivative is employed to study the qualitative properties of the proposed system, while in the second interval, we utilize the ABC fractional differential operator. Consequently, the study is initiated using the piecewise Atangana-Baleanu derivative framework for the systems. The HBV model is then analyzed to determine the existence, Hyers-Ulam (HU) stability, and disease-free equilibrium point of the model. Moreover, we showcase the application of an Adams-type predictor-corrector (PC) technique for Atangana-Baleanu derivatives and an extended Adams-Bashforth-Moulton (ABM) method for Caputo derivatives through numerical results. Subsequently, we employ computational methods to numerically solve the models and visually present the obtained outcomes using different fractional-order values. This network is designed to provide more precise information for disease modeling, considering that communities often interact with one another, and the rate of disease spread is influenced by this factor.

MPC (Magneto-Photonic Crystal) Optimisation is a feature-rich Windows software application designed to enable researchers to analyze the optical and magneto-optical spectral properties of multilayers containing gyrotropic constituents. A set of computational algorithms aimed at enabling the design optimization and optical or magneto-optical (MO) spectral analysis of 1D magnetic photonic crystals (MPC) is reported, together with its Windows software implementation. Relevant material property datasets (e.g., the optical spectra of refractive index, absorption, and gyration) of several important optical and MO materials are included, enabling easy reproduction of the previously published results from the field of MPC-based Faraday rotator development, and an effective demonstration-quality introduction of future users to the multiple features of this package. We also report on the methods and algorithms used to obtain the absorption coefficient spectral dispersion datasets for new materials, for which the film thickness, transmission spectrum, and refractive index dispersion function are known.

This article explores the Role and Contributions of Small and Medium Enterprises (SMEs) in a globalized and innovative economy, looking specifically at the challenges and opportunities. The establishment and expansion of new firms provides a sizable amount of net new jobs. While high-expectation entrepreneurial enterprises and gazelles are usually found among innovative and technology-based new organizations, it is also essential that there be a sizable supply for them to play a significant part in economic growth. In other words, encouraging all forms of en-trepreneurship is likely to increase the number of innovative, fast-growing enterprises as well as entrepreneurship. In many European countries, entrepreneurship needs to be encouraged. Findings show the crucial role the SME sector plays in the South African economy in tackling sustainable development. About 90% of all official firms in South Africa are thought to be small, medium, or micro-enterprises. The study concluded that one of the major contributions to the South African economy is the SME sector. The SME is not just viewed as a source of new jobs, but also as a sector that absorbs laid-off workers from both the private and public sectors.

Skin cancer is an exquisite disease globally nowadays. Because of the poor contrast and apparent resemblance between skin and lesions, automatic identification of skin cancer is complicated. The rate of human death can be massively reduced if melanoma skin cancer can be detected quickly using dermoscopy images. In this research, an anisotropic diffusion filtering method is used on dermoscopy images to remove multiplicative speckle noise and the fast-bounding box (FBB) method is applied to segment the skin cancer region. Furthermore, the paper consists of two feature extractor parts. One of the two features extractor parts is the hybrid feature extractor (HFE) part and another is the convolutional neural network VGG19 based CNN feature extractor part. The HFE portion combines three feature extraction approaches into a single fused feature vector: Histogram-Oriented Gradient (HOG), Local Binary Pattern (LBP), and Speed Up Robust Feature (SURF). The CNN method also is used to extract additional features from test and training datasets. This two-feature vector is fused to design the classification model. This classifier performs the classification of dermoscopy images whether it is melanoma or non-melanoma skin cancer. The proposed methodology is performed on two ordinary datasets and achieved the accuracy 99.85%, sensitivity 91.65%, and specificity 95.70%, which makes it more successful than previous machine learning algorithms.

We present the design and overall development of an eight degrees of freedom (DOF) based Bioinspired Quadruped Robot (BiQR). The robot is designed with a skeleton made of cedar wood. The wooden skeleton is based on exploring the potential of cedar wood to be a choice for legged robots’ design. With a total weight of 1.19 kg, the robot uses eight servo motors that run the position control. Relying on the inverse kinematics, the control design enables the robot to perform the walk gait-based locomotion in a controlled environment. The robot has two main aspects: 1) the initial wooden skeleton development of the robot showing it to be an acceptable choice for robot design, 2) the robot’s applicability as a low-cost legged platform to test the locomotion in a laboratory or a classroom setting.

Future healthcare professionals can play a significant role in managing those with thoughts of suicide. This scoping review aims to determine healthcare students’ knowledge and attitude towards suicide. A systematic search was conducted across five databases: PubMed, CINAHL, EMBASE, PsycINFO, Cochrane, and DARE. Only primary studies written in English, from database inception until 31st December 2023 were included. A total of 44 studies were included. Overall, healthcare students demonstrated low to moderate confidence in managing patients with thoughts of suicide and low levels of relevant education despite acknowledging their importance in preventing suicide. Increased personal exposure to suicide was associated with increased suicide literacy, confidence in managing patients with thoughts of suicide, and reduced stigma. Demographics and culture were shown to affect knowledge and attitude as well. Further research is needed to better understand various contributing factors to healthcare students’ knowledge and attitude regarding suicide. Evaluating healthcare curricula should be considered to implement effective suicide training program.

This study empirically investigates the complex interplay between the severity of the coronavirus pandemic, mobility changes in retail and recreation, transit stations, workplaces, and residential areas, and lockdown measures in 88 countries of the word. To conduct the study, data on mobility patterns, socioeconomic and demographic characteristics of people, lockdown measures, and coronavirus pandemic were collected from multiple sources (e.g., Google, UNDP, UN, BBC, Oxford University, Worldometer). A Structural Equation Modeling (SEM) technique is used to investigate the direct and indirect effects of independent variables on dependent variables considering the intervening effects of mediators. Results show that lockdown measures have significant effects to encourage people to maintain social distancing. However, pandemic severity and socioeconomic and institutional factors have limited effects to sustain social distancing practice. The results also explain that socioeconomic and institutional factors of urbanity and modernity have significant effects on pandemic severity. Countries with a higher number of elderly people, employment in the service sector, and higher globalization trend are the worst victims of the coronavirus pandemic (e.g., USA, UK, Italy, and Spain). Social distancing measures are reasonably effective at tempering the severity of the pandemic.

This paper considers the solution of the equations for ruin probabilities in infinite continuous time. Using the Fourier Transform and certain results from the theory of complex functions, these solutions are obtained as com- plex integrals in a form which may be evaluated numerically by means of the inverse Fourier Transform. In addition the relationship between the re- sults obtained for the continuous time cases, and those in the literature, are compared. Closed form ruin probabilities for the heavy tailed distributions: mixed exponential; Gamma (including Erlang); Lognormal; Weillbull; and Pareto, are derived as a result (or computed to any degree of accuracy, and without the use of simulations).

Abstract: Insecure and portable devices in the smart city’s Internet of Things (IoT) network are increasing at an incredible rate. Various distributed and centralized platforms against cyber-attacks have been implemented in recent years, but these platforms are inefficient due to their constrained levels of storage, high energy consumption, the central point of failure, underutilized resources, high latency, and etc. In addition, the current architecture confronts the problems of scalability, flexibility, complexity, monitoring, managing & collecting of IoT data, and defend against cyber-threats. To address these issues, the author presents distributed and decentralized Blockchain-Software Defined Networking (SDN) based energy-optimized architecture for IoT in smart cities. Thus, SDN continuous observing, controlling, managing IoT devices activities and detect possible attacks in the network; Blockchain provides adequate security & privacy against cyber-attacks, reduces the central point of failure issues; Network Function Virtualization (NFV) are used to saving energy, load balancing, as well as increasing the lifetime of the entire network. Also, we introduce a Cluster Head Selection (CHS) algorithm to reduce the energy consumption in the presented model. Finally, we analyze the performance using various parameters (e.g. throughput, response time, gas consumption, communication overhead) and demonstrating the result that provides higher throughput, lower response time, lower gas consumption than existing works for smart cities.

: Mistrust, amplified by numerous artificial intelligence (AI) related incidents, has caused the energy and industrial sectors to be amongst the slowest adopter of AI methods. Central to this issue is the black-box problem of AI, which impedes investments and fast becoming a legal hazard for users. Explainable AI (XAI) is a recent paradigm to tackle this challenge. Being the backbone of the industry, the prognostic and health management (PHM) domain has recently been introduced to XAI. However, many deficiencies, particularly lack of explanation assessment methods and uncertainty quantification, plague this young field. In this paper, we elaborate a framework on explainable anomaly detection and failure prognostic employing a Bayesian deep learning model to generate local and global explanations from the PHM tasks. An uncertainty measure of the Bayesian model is utilized as marker for anomalies expanding the prognostic explanation scope to include model’s confidence. Also, the global explanation is used to improve prognostic performance, an aspect neglected from the handful of PHM-XAI publications. The quality of the explanation is finally examined employing local accuracy and consistency properties. The method is tested on real-world gas turbine anomalies and synthetic turbofan data failure prediction. Seven out of eight of the tested anomalies were successfully identified. Additionally, the prognostic outcome showed 19% improvement in statistical terms and achieved the highest prognostic score amongst best published results on the topic.

A study of photovoltaic solar window technologies is reported, focusing on their structural features, functional materials, system development, and suitability for use in practical field applications, e.g. public infrastructures and agricultural installations. Energy generation performance characteristics are summarized and compared to theory-limit predictions. Working examples of pilot-trial solar window-based installations are described. We also report on achieving electric power outputs of about 25 W_p/m² from clear and transparent large-area glass-based solar windows.

We present a review of the current state of the field for a rapidly evolving group of technologies related to solar energy harvesting in built environments. In particular, we focus on recent achievements in enabling the widespread distributed generation of electric energy assisted by energy capture in semi-transparent or even optically clear glazing systems and building wall areas. Whilst concentrating on the cutting-edge recent results achieved in the integration of traditional photovoltaic device types into novel concentrator-type windows and glazings, we compare the main performance characteristics reported with these achievable using more conventional (opaque or semi-transparent) solar cell technologies. A critical overview of the current status and future application potential of multiple existing and emergent energy harvesting technologies for building integration is provided.

Background: The practice of self-medication is common worldwide and is an important component of medical self-care. However, the practice can be dangerous and is linked to various risks for the patients and the entire community. This study aimed to estimate the prevalence and factors associated with self-medication among Bangladeshi adults. Methods: A cross-sectional survey was conducted between April and June 2021 among Bangladeshi adults (aged >19 years) using convenient sampling. A total of 1320 data were collected through face-to-face interviews using a standardized questionnaire. Multivariable logistic regression analysis was used to identify factors associated with self-medication practice (SMP). Results: Overall, 41% of adults in our survey reported SMP. The most common illnesses that prompted SMP were common cold/flu (66.4%), gastric problems (65%), and headache (64.4%). The most frequent reasons for SMP were to get better services (30.59%), perceive SMP without side effects (23.28%), and save time with effectiveness (14.56%). Potential risk factors included 10 years (AOR = 1.91; 95% CI: 1.04 - 3.50) and >12 years of schooling (AOR = 5.03; 95% CI: 2.27 - 11.15), being a businessman (AOR = 4.64; 95% CI: 1.74 - 12.37), having ≤6 family members (AOR = 2.13; 95% CI: 1.40 - 3.24), being a member of a social group (AOR = 1.53; 95% CI: 1.10 - 2.12), a health status check after every six months (AOR = 1.52; 95% CI: 1.08 - 2.13), and current ill-health (AOR = 1.41; 95% CI: 1.06 - 1.87). Protective factors identified included ≤30 years of age (AOR = 0.40; 95% CI: 0.17 - 0.93), and practice of modern (AOR = 0.39; 95% CI: 0.22- 0.69) and herbal (AOR = 0.45; 95% CI: 0.21- 0.97) healing types. Conclusion: More than one-third of the study participants reported practicing self-medication. Increasing the community’s awareness of the extreme consequences of SMP and not just the average experience might sway individuals away from SMP, and implementing strict jurisdiction could be a way to minimize the SMP.

Amorphous ferrite-type rare-earth (RE) substituted garnets and garnet-oxide nanocomposite layers are prepared on clear glass substrates by using RF magnetron sputter-deposition process. By using a combination approach employing custom-built spectrum-fitting software in conjunction with Swanepoel’s envelope method, the spectral dispersion function of optical constants and the layer thicknesses are derived accurately from the transmission spectra of the as-deposited samples. The effects of excess metal-oxides added to the base material systems during the co-deposition process are found to affect the refractive index and the optical absorption coefficients of garnet-oxide composites. A number of optical constant datasets are presented, enabling the experimentalists to design nanophotonic or integrated-optics devices employing these functional materials.

Face milling is a well known commercial process highly used in heavy industries that consumes high amount of power. Besides power issue, modern manufacturing industries are aiming for per part cost reduction keeping the product quality unimpaired. Unexpectedly if the part is rejected in any stage of manufacturing, the cost of manufacturing dramatically increases. Major cause of part rejection is excessive tool wear that imparts poor surface profile or catastrophic tool failure that causes adherence of broken tool debris onto machined surface. Furthermore, the tool wear is associated with sliding distance (frictional distance) and the tool life quantifies the cost of tools. As such, from the perspective of manufacturing industries it is imperative to optimize the surface quality parameter, cost of part, power consumption, and material removal – this is exactly what is accomplished here. By this work, it is possible to conserve power consumption, produce parts with lower cost, manufacture with uncompromising surface quality and enhanced material removal rate. Moreover, as intermediate factors of interest, the influences of sliding distance, tool life and tool flank wear on the overall machining performance are evaluated. The multi-objective optimization by Grey Relational Analysis (GRA) revealed that for improved product performance and fast manufacturing (case 1) optimum results are: feed per tooth fz = 0.25 mm/tooth, cutting speed vc = 392.6 m/min and cutting length l = 0.5 mm; for resource conservation (case 2) the optimum results are: feed per tooth fz = 0.125 mm/tooth, cutting speed vc = 392.6 m/min, cutting length l = 0.5 mm.

Offsite construction is increasingly being presented as a way to increase housing delivery and reduce the housing crisis. Housing Associations play a pivotal role in the delivery of affordable homes and therefore offsite construction could be beneficial in alleviating the crisis. For offsite construction uptake to increase, the conceptual and pragmatic advantages and challenges surrounding offsite housing in relation to evolving social domestic needs to be explored and understood. The purpose of this paper is to discuss the viability of offsite construction as not only a full-service solution to social housing provision, but an integral strategic partner for meeting the range of specialised fabrication needs for these new properties. A literature review is carried out to explore the conceptual and pragmatic advantages and challenges encountered by HAs adopting offsite construction methods. The paper also investigates which the housing tenures are most suited to offsite construction technology. The paper highlighted that whilst individual case studies and example homes offer one mode of justification for Housing Associations to move forward, it is the cumulative effect of cost savings, sustainability, specialised skill sets, labour reduction, structural innovation, and rate of construction that should be weighed and incorporated into this consideration-making process.

Many metrics exist for the evaluation of binary classifiers, all with their particular advantages and shortcomings. Recently an “Efficiency Index” for the evaluation of classifiers has been proposed, based on the consistency, or matching, and contradiction, or mismatching, of outcomes. This metric and its confidence intervals are easy to calculate from base data in a 2x2 contingency table, and values can be qualitatively and semi-quantitatively categorised. For medical tests, in which context the Efficiency Index was originally proposed, it facilitates communication of risk (of correct diagnosis versus misdiagnosis) to both clinicians and patients. Variants of the efficiency index (balanced, unbiased) which take into account disease prevalence and test cut-offs have also been described. The objectives of the current paper were firstly to extend the EI construct to other formulations (balanced level, quality) and secondly to explore the utility of EI and all four of its variants when applied to the dataset of a large prospective test accuracy study of a cognitive screening instrument. This showed that the balanced level, quality, and unbiased formulations of EI are more stringent measures.

We reduplicate the Book “Dark Energy” by M. Li, X-D. Li, and Y. Wang, zero-point energy calculation with an unexpected “length’ added to the ‘width’ of a graviton wavefunction just prior to the entrance of ‘gravitons’ to a small region of space-time prior to a nonsingular start to the universe. We compare this to a solution worked out using Klauder Enhanced quantization, for the same given problem. The solution of the first Cosmological Constant problem relies upon the geometry of the multiverse generalization of CCC cosmology which is explained in this paper. The second solution, used involves Klauder enhanced quantization. We look at energy given by our methods and compare and contrast it with the negative energy of the Rosen model for a mini sub universe and estimate GW frequencies

Data dealing with the assessment of heavy metal pollution in road dusts in Jeddah, Saudi Arabia and its implication to human health risk of human exposure to heavy metals, are scarce. Road dusts were collected from five different functional areas (traffic areas TA, parking areas PA, residential areas RA, mixed residential commercial areas MCRA and suburban areas SA) in Jeddah and one in rural area (RUA) in Hada Al Sham. We aimed to measure the pollution levels of heavy metals and estimate their health risk of human exposure applying risk assessment models described by USEPA. Using geo-accumulation index (I_geo), the pollution level of heavy metals in urban road dusts was in the following order Cd > As > Pb > Zn > Cu > Ni > Cr > V > Mn > Co > Fe. Urban road dust was found to be moderately to heavily contaminated with As, Pb and Zn, and heavily to extremely contaminated with Cd. Calculation of enrichment factor (EF) revealed that heavy metals in TA had the highest values compared to that of the other functional areas. Cd, As, Pb, Zn and Cu were severely enriched, while Mn, V, Co, Ni and Cr were moderately enriched. Fe was consider as a natural element and consequently excluded. The concentrations of heavy metals in road dusts of functional areas were in the following order: TA > PA > MCRA > SA > RA > RUA. The study revealed that both children and adults in all studied areas having health quotient (HQ) < 1 are at negligible non-carcinogenic risk. The only exception was for children exposed to As in TA. They had an ingestion health quotient (HQ_ing) 1.18 and a health index (HI) 1.19. The most prominent exposure route was ingestion. The cancer risk for children and adults from exposure to Pb, Cd, Co, Ni, and Cr was found to be negligible (< 1 x 10^-6).

Urban Tree Canopy (UTC) greatly enhances the livability of cities by reducing urban heat buildup, mitigating stormwater runoff, and filtering airborne particulates, among other ecological services. These benefits, combined with the relative ease of measuring tree cover from aerial imagery, have led many cities to adopt management strategies based on UTC goals. In this study, we conducted canopy analyses for the 300 largest cities in Florida to assess the impacts of development practices, urban forest ordinances, and hurricanes on tree cover. Within the cities sampled, UTC canopy ranged from 5.9% to 68.7% with a median canopy coverage of 32.3% Our results indicate that the peak gust speeds recorded during past hurricanes events were a significant predictor of canopy coverage (P-value = <0.001) across the sampled cities. As peak gust speeds increased from 152 km/h (i.e., a lower-intensity Category 1 storm) to 225 km/h (lower-intensity Category 4 and the maximum gusts captured in our data), predicted canopy in developed urban areas decreased by 7.7%. Beyond the impacts of hurricanes and tropical storms, we found that historic landcover and two out of eight urban forest ordinances were significant predictors of existing canopy coverage (P-landcover <0.001; P-tree preservation ordinance = 0.02, P-heritage tree ordinance = 0.03). Results indicate that local policies and tree protections can protect or enhance urban tree canopy, even in the face of rapid development and periodic natural disturbances.

We reduplicate the Book “Dark Energy” by M. Li, X-D. Li, and Y. Wang, given zero-point energy calculation with an unexpected “length’ added to the ‘width’ of a graviton wave just prior to specifying the creation of ‘gravitons’, using the Rosen and Israelit model of a nonsingular universe. In doing so we are in addition to obtaining a wavelength 10^30 times greater than Planck’s length so we can calculate DE, may be able to with the help of the Rosen and Israelit model have a first approximation as to the arrow of time, and a universe with massive gravity. We have left the particulars of the nonsingular starting point undefined but state that the Rosen and Israelit model postulates initial temperatures of 10^-180 Kelvin and also a value of about Planck temperature, at 10^-3 centimeters radii value which may satisfy initial conditions asked by t’Hooft for describing an arrow of time. A key assumption is that the DE is formed at 10^-3 cm, after an expansion of 10^30 times in radii, from the Planck length radius nonsingular starting point. The given starting point for DE in this set of assumptions is where there is a change in the cosmic acceleration, to a zero value, according to Rosen and Israel, with time t = 1.31 times 10^-42 seconds. Which may be where we may specify a potential magnitude, V, which has ties into inflaton physics. The particulars of the model from Rosen and Israelit allow a solution to be found, without discussion of where that nonsingular starting point came from, a point the author found in need of drastic remedies and fixes.

This work introduces a new architecture for a time-domain feedback-based beamformer designed to meet real-time processing demands. The primary goal of this design is to locate reflective sources by estimating their direction of arrival (DOA) and signal range. Incorporating a feedback mechanism in this architecture is a unique aspect that refines localization precision. We conduct an in-depth analysis highlighting their respective benefits and limitations to compare the effectiveness of time-domain feedback beamforming against conventional time-domain methods. Our evaluation of the proposed architecture, based on critical performance indicators such as peak-to-sidelobe ratio, mainlobe width, and directivity factor, demonstrates its ability to improve beamformer effectiveness significantly.

a Special Issue of Microorganisms devoted to ‘Microbial Biocatalysis and Biodegradation’ would be incomplete without some form of acknowledgement of the many important roles that dioxygen-dependent enzymes (principally mono- and dioxygenases) play in relevant aspects of biooxygenation. This is reflected by the multiple strategic roles that dioxygen -dependent microbial enzymes play both in generating valuable synthons for chemoenzymatic synthesis, and in facilitating key reactions that drive the global geochemical Carbon Cycle. A useful insight into this relationship can be gained by reviewing the evolution of the current status of 2,5-diketocamphane 1,2-monooxygenase (EC 1.14.14.108) from camphor-grown Pseudomonas putida ATCC 17453. Over the last sixty years, the perceived nature of this monooxygenase has transmogrified significantly. Commencing in the 1960s, extensive initial studies consistently reported that the enzyme was a monomeric true flavoprotein dependent on both FMNH₂ and nonheme iron as bound cofactors. However, over the last decade all those criteria have changed absolutely, and the enzyme is currently acknowledged to be a metal ion-independent homodimeric flavin-dependent two-component monooxygenase deploying FMNH₂ as a cosubstrate. That transition is a paradigm of the ever evolving nature of scientific knowledge.

Ageing is the strongest known risk factor for many of the neurodegenerative diseases causing cognitive decline and dementia. Identification of cognitive impairment may be a prelude to appropriate treatment, hopefully disease-modifying. Use of cognitive screening instruments may be an equitable way to identify cognitive impairment. This study examined the use of two such instruments, Free-Cog and Mini-Addenbrooke’s Cognitive Examination (MACE), in patient cohorts referred to a dedicated cognitive disorders clinic based at a tertiary neurosciences centre. Results showed that: (1) specificity and positive predictive value increased with patient age for both tests with some loss of sensitivity and negative predictive value. (2) In the oldest age groups (≥75 and ≥70 years respectively) where specificity was at maximum, a positive test result (i.e. below the specified test cut-off) rules in the diagnosis of cognitive impairment. (3) Values of an “Efficiency Index” for each test indicated qualitatively a moderate change in the probability of correct diagnosis and quantitatively an approximately 15-25% increase in the probability of correct diagnosis. These findings show that both Free-Cog and MACE may be used with confidence for the identification of cognitive impairment and dementia in older patient cohorts. These findings may have implications for public health policies directed to case-finding in clinical practice as opposed to population-based screening.

In this article, bio-composites derived from starch-glycerol biodegradable matrix reinforced with jute fibers have been fabricated using the wet hand lay-up and compression moulding techniques. Samples having different weight percentages of jute fiber in the starch matrix have been analysed. The fibers surface was chemically treated by alkaline sodium hydroxide for improving the interphase bonding between fiber and matrix. Tensile test for the composites were done and the sample with highest tensile strength was selected for further tests that included water absorption, scanning electron microscopy and thermal analysis. It has been concluded that the ultimate tensile strength was found to be maximum for the composition of 15% fiber by weight composite as 7.547 MPa without epoxy coating and 10.43 MPa with epoxy coating. The major disadvantage of bio-composite is its high water absorption property, which in this study has been inhibited by the epoxy resin layer. Herein, the results of various tests done disclose a noteworthy improvement in the overall properties of bio-composite, in comparison to the neat biodegradable starch matrix.

Most of the literature on the optimization problem of transportation in supply chain networks (SCN) considered fixed costs (FC). However, in the practical applications of this problem it is important to study the effect of FC. This paper examines the impact of fixed cost increase as well as the variable cost on the optimization of a Two-Stage SCN. To do so, two mathematical models for mixed-integer nonlinear programming are developed. The first model optimizes fixed and variable costs in addition to the opening cost, whereas the second model only optimizes variable and opening costs. To evaluate the effect of considering FC on the optimization supply chain problem, four groups of instances are randomly generated, and solved using Lingo. The results of the two models are compared utilizing the average percentage deviation. In addition, sensitivity analysis is performed to determine the impact of changes in opening and variable costs on the considered optimization problem. The computational results and the sensitivity analysis show that the first model with minimized FC outperforms the second model, which does not consider the FC in minimization and FC affect the optimization.

There are a large number of wildlife and insect species that are in trouble on this planet, and most believe that monarch butterflies in eastern North America are too, because of the well-publicized declines of their winter colonies in central Mexico in the last 25 years. A small number of studies over the last decade have cast doubt on this claim by showing declines are not evident at other stages of the annual cycle. To determine how extensive this pattern is, I conducted an exhaustive review of peer-reviewed and grey literature on (eastern) monarch population censuses and studies, conducted across all seasons, and extracted data from these sources to evaluate how monarch abundance has or has not changed over time. I identified 20 collections of data that included butterfly club reports, compilations of citizen-science observations, migration roost censuses, long-term studies of isotopic signatures, and even museum records. These datasets range in duration from 15 years to over 100 years, and I endeavored to also update each with information from the most current years. I also re-examined the winter colony data after incorporating historical records of colony measurements dating back to 1976. This represents the most complete and up-to-date synthesis of information regarding this population. When I examined the long-term trajectory within each dataset a distinct pattern emerged. Modest declines are evident within the winter colonies (over the full 45 year dataset), and, within three censuses conducted during the spring recolonization. Meanwhile, 16 completely separate monitoring studies conducted during the summer and fall (and from varying locations) revealed either no trend at all or in fact an increase in abundance. While each of these long-term studies has inherent limitations, the fact that all 16 sources of data show the same pattern is undeniable. Moreover, this evidence is consistent with recently-conducted genetic work that shows a lack of decline. Collectively, these results indicate that despite diminishing winter colonies and spring migrations, monarchs in eastern North America are capable of rebounding fully each year, implying that milkweed is not limiting within their collective range. Moreover, there is no indication from these data that the summer population was ever truly diminished by changing agricultural practices in the Midwest that reduced milkweed in crop fields within that region. It is possible that the larger population is not as dependent on Midwestern agricultural milkweed as once thought, and/or that monarchs are adapting to increasingly human-altered landscapes. These results are timely and should bear on the upcoming USFWS decision on whether the monarch requires federal protection in the United States. Importantly, they argue that despite losses of many insects globally, the eastern North American monarch population is not in the same situation.

We report the isolation of two novel degrading bacterial strains active against the potential environmental pollutant acetamino-phen/paracetamol. Streptomyces Chrestomyceticus (RS2) and Streptomyces Flavofuscus (M33) collected from El-Natrun Valley, Egypt, water, sediment, and sand samples were taxonomically characterized via conidiophores morphologic characterization under Trans-mission Electron Microscope (TEM). Genotypic identification, done based on their 16S rRNA gene sequence analysis followed by BLAST alignment and deposited on the NCBI as 2 novel strains. The phylogenetic tree was constructed using an appropriate software. Acetaminophen degradation-products chemical structure was identified by GC/LC MS. The biological antimicrobial activity of some selected acetaminophen degradation-products extracts and derived compounds was examined against panel of test micro-organisms and found to be have high anti-microbial effect. In addition, in silico cheminformatics Swiss ADMET evaluation of these selected deg-radation extract for gastric absorption, distribution, hepatic metabolism, renal excretion as well as distribution to CNS and finally not mutagenic/teratogenic or genotoxic virtually. In vitro cytotoxic activity of these selected bio-degradation products was performed against HepG2 and MCF7 cancer cell lines, revealing that M33 and RS2 extract effect on acetaminophen/paracetamol bio-degradation products are potentially safe with higher IC50 on HepG2 and MCF7, in comparison to acetaminophen/paracetamol with IC50 of 108.5 μg/ml. Moreover, the in vivo acute oral single dose toxicity experiment was conducted, being compared with acetamino-phen/paracetamol to confirm that the bio-degradation products have lower toxicity than acetaminophen in vivo and in silico.

In the past decade, considerable efforts have been devoted to the development of semitransparent organic solar cells. Numerous materials and architectures have been proposed for the future commercialization of these devices. Among these, the use of ternary active layers demonstrated a great promise for the development of efficient semi-transparent organic solar cells with the potential for future applications including self-powered greenhouses and powered windows. Researchers seek alternative solutions to the trade-off between device power conversion efficiency (PCE) and average visible transmittance (AVT), with photoactive materials being the key parameters that govern both (PCE) and (AVT) as well as device stability. Several new organic materials, including polymers and small molecules, were synthesized, and used in conjunction with a variety of techniques to achieve semitransparent conditions. In this review paper, we will look at the working principle and key parameters of semi-transparent organic solar cells, as well as the methods that have been used to improve the performance of ternary-based semi-transparent organic solar cells. The main approaches were concluded to be spectral enhancement and transparency increment of the active layer through bandgap tuning, utilizing novel organic semiconductors, and design architecture of the active layers.

We reduplicate the Book “Dark Energy” by M. Li, X-D. Li, and Y. Wang, given zero-point energy calculation with an unexpected “length’ added to the ‘width’ of a graviton wave just prior to specifying the creation of ‘gravitons’, while using Karen Freeze’s criteria as to the breakup of primordial black holes to give radiation era contributions to GW generation. The GW generation will be when there is sufficient early universe density so as to break apart Relic Black holes of the order of Planck mass (10^15 grams) which isabout when the mass of relic black holes is created, 10^-27 or so seconds after expansion starts. Need to state a key result will be in the initial potential V calculated, in terms of other input variables

The rapid growth of network services, Internet of Things devices and online users on the Internet have led to an increase in the amount of data transmitted daily. As more and more information is stored and transmitted on the Internet, cybercriminals are trying to gain access to the information to achieve their goals, whether it is to sell it on the dark web or for other malicious intent. Through thorough literature study relating to the causes and issues that are brought from the security and privacy segment of wireless networks, it is observed that there are various factors that can cause the networks to be an insecure; especially factors that revolve around cybercriminals with their growing expertise and the lack of preparation and efforts to combat them by relevant bodies. The aim of this paper is to showcase major and frequent security as well as privacy issues in wireless networks along with specialized solutions that can assist the related organizations or the public to fathom how great of an impact these challenges can bring if every related stakeholder took a step in reducing them. Through this paper it is discovered that there are many ways these challenges can be mitigated, however, the lack of implementation of privacy and security solutions is still largely present due to the absence of practical application of these solutions by responsible parties in real world scenarios.

Herewith we report a facile synthesis of zinc oxide doped with (5, 10, 15, and 20 wt%) titanium oxide nanocomposites in gelatin under ultra-sonication. The X-ray diffraction (XRD) data revealed ZnO the formation in addition to a rutile phase TiO2. The ZnO phase size decreased, and the rutile TiO2 phase increased with a TiO2 loading increment. The scanning electron microscopy (SEM) displayed a combination of spherical and hexagonal particles with a 60 – 80 nm size distribution. The prepared nanostructures photocatalytic activity was assisted using Rhodamine B dye, where they showed enhanced photodegradation competence under visible light irradiation. The kinetics of photodegradation followed the first-order kinetics with the 20 % wt sample having the maximum activity. The mechanistic investigation revealed the dominance of h+ and •O2- species during the dye photodegradation. The results indicate the potential application of such gelatin stabilized nanostructures for dye illumination from aqueous solutions under sunlight.

The present work encompasses an application-oriented perspective to the possible employment of gold nanoparticles as nanomedicine in cancer therapeutics. The rationale of the work lies in the growing needs for assessment of advanced alternative treatment of cancer employing functionalized nanoparticles as nanomedicine. Gold nanoparticles fabricated via green chemistry methods by leaves of a time-honored medicinal plant, Piper betle were ascertained for their synthesis and properties under the umbrella of characterization of nanoparticles, through various techniques like UV-vis spectroscopy, FTIR spectroscopy, X-ray diffraction, and scanning electron microscopy. The cytotoxicity assay of well-characterized gold nanoparticles was monitored against lung cancer cell line (A549) by metabolic and imaging assays. MTT assay or the metabolic assay was performed for a range of nanoparticles’ concentrations. The results were promising and proved to be a leading-edge venture, envisaging the possibility of gold nanoparticles for cancer therapeutics.

Insects quickly develop resistance to conventional chemical insecticides. The use of silica nanoparticles (SiO₂NPs) is a promising new approach for managing insect pests. The insects that have been studied are, in most cases, external feeders and internal leaf feeders have not been well studied. Here, we investigate the efficiency of SiO₂NPs in controlling the American serpentine leafminer Liriomyza trifolii (Diptera: Agromyzidae), a devastating insect pest of a wide range of crops. SiO₂NPs at concentrations of 50, 100, 200 and 400 mg/L compared to a control of distilled water were applied to intact Phaseolus vulgaris leaves by spraying to evaluate their effects, via the plant, on the number, survival, developmental/feeding speed, body mass/size and sex ratio of L. trifolii released after spraying. A qRT-PCR analysis was conducted to assess oxidative stress in L. trifolii based on the gene expression level of the two major antioxidant enzymes; catalase and superoxide dismutase. The number of mines, survival rate and puparia weight were lower than the control at the highest concentration of SiO₂NPs, while pupariation was delayed at most of the concentrations studied and puparium weight/size decreased at low concentrations. Sex ratio was not affected by SiO₂NPs. Gene expression levels of the antioxidant enzymes at the pupal stage were not significantly affected by SiO₂NPs at any concentration but some individuals showed up-regulation at low SiO₂NP concentrations, inferring development of resistance. This study demonstrated that a priori application of the highest concentration of SiO₂NPs to plants effectively reduces a leafminer population but that application of even the lowest concentration can decrease the life history trait values of surviving leafminers.

Purpose The gradual increase in geriatric issues and global imbalance of the ratio between patients and healthcare professionals has created a demand for intelligent systems with the least error-prone diagnosis results to be used by less medically trained persons and save clinical time. This paper aims at investigating the development of an image-based colourimetric analysis. The purpose of recognising such tests is to support wider users to begin a colourimetric test to be used at homecare settings, telepathology, etc. Design/methodology/approach The concept of an automatic colourimetric assay detection is delivered by utilising two cases. Training Deep Learning (DL) models on thousands of images of these tests using transfer learning, this paper i) classifies the type of the assay, and ii) classifies the colourimetric results. Findings This paper demonstrated that the assay type can be recognised using DL techniques with 100% accuracy within a fraction of a second. Some of the advantages of the pre-trained model over the calibration-based approach are robustness, readiness and suitability to deploy for similar applications within a shorter period of time. Originality/value To the best of our knowledge, this is the first attempt to provide Colourimetric Assay Type Classification (CATC) using DL. Humans are capable to learn thousands of visual classifications in their life. Object recognition may be a trivial task for humans, due to photometric and geometric variabilities along with the high degree of intra-class variabilities it can be a challenging task for machines. However, transforming visual knowledge into machines, as proposed, can support non-experts to better manage their health and reduce some of the burdens on experts.

Malaysian healthcare institutions still use ineffective paper-based vaccination systems to manage childhood immunization schedules. This may lead to missed appointments, incomplete vaccinations, and outbreaks of preventable diseases among infants. To address this issue, we proposed a text messaging vaccination reminder and recall system named Virtual Health Connect (VHC) to simplify and accelerate the immunization administration for nurses that may result in improving the completion and timeliness of immunizations among infants. Considering the narrow research about the acceptance of these systems in the healthcare sector, we examined factors influencing nurses’ attitude and intention to use VHC using the extended technology acceptance model (TAM). The novelty of the conceptual model is proposing new predictors of attitude, namely, perceived compatibility and perceived privacy and security issues. We conducted a survey among 121 nurses in Malaysian government hospitals and clinics to test the model. We analyzed the collected data using partial least squares-structural equation modeling (PLS-SEM) to examine the significant factors influencing nurses’ attitude and intention to use VHC. Moreover, we applied artificial neural network (ANN) to determine the most significant factors of acceptance with higher accuracy. Therefore, we could offer more accurate insights to decision-makers in the healthcare sector for the advancement of health services. Our results highlighted that the compatibility of VHC with the current work setting of nurses developed their positive perspectives toward the system. Moreover, the nurses felt optimistic about the system when considering it to be useful and easy to use in the workplace. Finally, their attitude toward using VHC played a pivotal role in raising their intention. Based on the ANN models, we also found that perceived compatibility was the most significant factor influencing nurses' attitude towards using VHC, followed by perceived ease of use and perceived usefulness.

Cloudburst is one of the most devastating and frequently occurring natural hazardous events in Indian Himalayan region. Localized deep cumulus convective clouds have a capability of giving enormous amount of rainfall over a limited horizontal area, within a short span of time. Whenever, such events occur, lead to flash floods causing landslides, house collapses, dislocation of traffic, and human casualties on a large scale. Therefore, it is necessary to predict the cloudburst inundation zones accurately to avoid damage associated with them. For this, high resolution Digital Elevation Model generated from CartoSat-1 (Stereo pair) were integrated in MIKE 11 Hydrodynamic 1D model to generate longitudinal profile of the study area and to find water level, peak discharge, flow velocity, flow width at different reaches along the Asi ganga and Bhagirathi river, to know the Cloudburst flood inundation scenario. On 3^rd August 2012 one of the major Cloudburst event occurred in Asi Ganga Valley in Indian Himalayan region which was considered for simulation of hydrodynamic model. For a Cloudburst event, 100 mm/hr rainfall was considered for the simulation of the hydrodynamic model. It is observed that the discharge rise from 50 m³/s to 549.164 m³/s (an abrupt increase of about 10 times) within 1 hr at Sangamchetty in Asiganga river and at Joshiyara area rise from 600 m³/s to 3378.69 m³/s (an abrupt increase of about 5 times) within 4 hr in Bhagirathi river. Similarly the water level rises around 3 m and 6m in Asi Ganga and Bhagirathi rivers respectively. Flash Flood inundation areas due to Cloudburst on 3^rd August 2012 were demarcated from the simulation results in GIS environment.

We first of all define the arrow of time. Definition of the arrow of time will allow choosing different initial starting points. One of the issues we will also discuss is the interconnection be-tween the arrow of time, entropy and quantum information. Seth Lloyd in his 2001 work made a linkage between entropy, bits, and information via an axiomatic approach involving time in-tervals. Our take is a bit more general. We will discuss as well the t’Hooft’s statement as to in-itial conditions and times arrow, and how different cosmological models may influence initial conditions. Spoilers alert, if a nonsingular start to expansion existed, this would provide the most straightforward way to avoid a datum from classical relativity. That is, that in the actual equations of classical GR, there is no reason to have time asymmetry. Time asymmetry is built into initial conditions and we will detail several candidates. The first half of the paper brings up cosmology models and forming the arrow of time. The second is related to entropy itself and the problem of information. .

The world is currently experiencing COVID-19, one of the worst pandemics that have happened in this century, affecting 10.7 million people worldwide. It has caused massive growth in the number of employees working from home. However, employees have minimal cybersecurity resources unlike organizations with security teams protecting them against attacks. Hence, cybersecurity plays an important role as users can be easily targeted by cybercriminals. This paper examines how cyberattacks have increased during this pandemic and shows how greatly they have affected health organizations, individuals and social networking applications. Results of the attacks include data breaches, false announcements and operations being disrupted. Attacks occurring during this pandemic and how they were handled are also critically discussed. The existing contributions do touch on related attacks but do not provide in-depth solutions regarding the issues. Even though there are many works and findings that were done previously, technology is ever evolving. Therefore, we need to be well versed with current and future issues and provide the latest mechanisms to prevent cybersecurity threats from occurring. On our share, we intend to present our findings on the challenges being faced by the population and its increasing threats as well as presenting unique solutions that can help organizations or related persons understand or spread awareness on the importance of cybersecurity. Through the research performed in this paper, it is found that there are many ways these issues can be alleviated. However, the issue is that there is significant lack of action and investment in terms of actual implementation and application of the available solutions.

We obtain exact solutions to the field equations for 5 dimensional LRS Bianchi type-I spacetime in $f(R,T)$ theory of gravity where specifically the following three cases are considered: (i) $f(R,T)=\mu(R+T)$, (ii) $f(R,T)=R \mu + R T \mu^2$ and (iii) $f(R,T)=R+\mu R^2+\mu T$ where $R$ and $T$ respectively the Ricci scalar and trace of the energy-momentum tensor. It is found that the equation of state (EOS) parameter $w$ is governed by the parameter $\mu$ involved in the $f(R,T)$ expressions. We fine-tune the parameter $\mu$ to obtain effect of phantom energy in the model, however we also restrict this parameter to obtain a stable model of the universe. It is noted that the model isotropizes at finite cosmic time.

The COVID-19 pandemic has revealed many knowledge gaps with implications toward the speed and nature of our response to contain, assess and mitigate risk. The routine discharge of treated and untreated wastewater into rivers and coastal waters has placed SARS-CoV-2 viability in wastewater at the centre of an emerging hazard and potential risk to water industry workers and the public who come into contact with sewage-impacted water. Here we provide a review of the Severe Acute Respiratory Syndrome coronavirus primary literature that presents the evidence base pertaining to the key questions of whether the SARS-CoV-1 and SARS-CoV-2 is shed in stool and urine, is recoverable, and infectious in wastewater. We discuss the challenges posed by the current literature base and the extent to which the current evidence is fit for the purpose of informing robust human and environmental risk assessments.

In recent years, the field of radiotherapy has witnessed remarkable advancements with the integration of artificial intelligence (AI) technologies into clinical practice. Traditionally, radiotherapy treatment planning has been a labor-intensive process, requiring meticulous manual segmentation and optimization. With the advent of AI, particularly deep learning algorithms, the accuracy and efficiency of target delineation and organ-at-risk segmentation have significantly improved. AI-driven algorithms analyze voluminous medical imaging data, enabling rapid and precise contouring, thus expediting the planning phase and reducing inter-observer variability. Furthermore, AI's role extends to treatment plan optimization, where it intelligently explores vast parameter spaces to generate optimal plans tailored to individual patients. This not only saves dosimetrists' time but also enhances plan quality by accounting for complex anatomical variations and personalized clinical goals. In the realm of treatment delivery, AI-powered real-time image guidance enhances the accuracy of patient positioning, ensuring precise radiation targeting. Adaptive radiotherapy, enabled by AI, allows on-the-fly plan modifications in response to anatomical changes, significantly improving treatment accuracy in scenarios like tumor shrinkage or weight loss. Beyond planning and delivery, AI algorithms contribute to outcome prediction by analyzing historical patient data and treatment responses. This predictive capability aids clinicians in making informed decisions and refining treatment strategies for better prognoses. Despite the revolutionary potential, challenges remain in seamlessly integrating AI into clinical workflows. Ethical considerations, data privacy, and algorithm interpretability necessitate cautious implementation. Additionally, fostering interdisciplinary collaboration between AI experts and radiation oncologists is imperative to harness the technology's full potential. This paper explores the impact of AI in four key areas of radiotherapy: automated segmentation, dosimetric and machine quality assurance, adaptive radiation therapy, and clinical outcome prediction.

We report on the development of several different thin-film functional material systems prepared by RF magnetron sputtering at Edith Cowan University nanofabrication labs. We conduct research on the design, prototyping, and practical fabrication of high-performance magneto-optic (MO) materials, oxide based sensor components, and heat regulation coatings for advanced construction and solar windows.

This study offers a concise summary of the research that has been done on alternative methods of HRM. A survey of 47 articles on the topic of creative human resource management uncovered three primary schools of thinking. At its core, innovation in HRM entails nothing more than that. One such topic worthy of investigation is the way human resource management approaches new situations. Third, research on inventiveness in the business world has given rise to the concept of "innovative HRM." Each of these three approaches, as well as the theoretical underpinnings of each, will be covered in this article. The note wraps up with a discussion of the significance of the findings for next research as well as clinical practice.

Biofilter application for treatment of stormwater containing de-icing chemicals commonly applied in airports, propylene glycol and potassium formate, was investigated. Lab-scale adsorption tests using filter media made of crushed clay (Filtralite) and granular activated carbon showed that adsorption was unsuitable for removal of propylene glycol and potassium formate. Column filtration experiment testing two different crushed clay size ranges was conducted. The results showed that DOC removal was dependent on a number of factors. This study investigated the impact of filter depth, nutrients addition, and filtration rate. DOC removal suggested that DOC degradation occurred on the top filter layer. It was shown that the most active separation occurred in the first ~20 cm of filter depth. This was confirmed by results from water quality analysis (i.e. DOC removal and ATP measurement) and calculations based on a filtration performance analysis (Iwasaki model) and filter hydraulic evaluation (Lindquist diagram). It was shown that for the highest C:N:P ratio tested (molar ratio of 24:7:1), 50-60% DOC removal was achieved. Addition of nutrients was found important and determining the biofilter performance.

With the dramatic increase in world population, continued advances in modern greenhouse agriculture and plant growth practices are expected to help overcome the global problem of future food shortages. Next generation greenhouse design practices will need to address a range of issues, ranging from energy and land use efficiency to providing plant-optimised growth techniques. In this paper, we focus on investigating the optimum irradiation spectra matched to the lettuce species (Lactuca sativa, L.), which is commonly grown in greenhouse environments, in order to develop low-emissivity glass panes that maximize the biomass productivity of glass greenhouses. This low-emissivity glass passes the solar spectral components needed for crop growth, while rejecting other unwanted radiations, leading to significant energy savings and other beneficial effects related to greenhouse climate control, in a range of climates. This is due to reducing both the solar heat gain and photosaturation, which can raise the temperature of the crops to harmful levels. Experimental results show that substantial biomass productivity improvements in lettuce (up to ~14.7%) can be attained using spectrally optimized illumination, compared with white light irradiation. We also report on the development of advanced metal-dielectric thin-film filters that produce the optimum illumination spectrum when exposed to sunlight.

The basis for computation in the brain is the quantum threshold of the ‘soliton’ accompanying the ion changes of the action potential and the refractory membrane at convergences. We provide a logical explanation from the action potential to a neuronal model of the coding and computation of the retina and have explained how the visual cortex operates by quantum phase processing. In the small world network parallel frequencies collide into definable patterns of distinct objects. Elsewhere we have shown how many sensory cells are mean sampled to a single neuron and that convergences of neurons are common. We have also demonstrated, using the threshold and refractory period of a quantum phase pulse, that action potentials diffract across a neural network due to the annulment of parallel collisions in phase ternary computation (PTC). Thus, PTC applied to neuron convergences results in collective mean sampled frequency and is the only mathematical solution within the constraints of brain neural networks (BNN). In the retina and other sensory areas, we discuss how this information is coded and then understood in terms of network abstracts within the lateral geniculate nucleus (LGN) and visual cortex. First by defined neural patterning within a neural network, and then in terms of contextual networks, we demonstrate that the output of frequencies from the visual cortex contain information amounting to abstract representations of objects in increasing detail. We show that nerve tracts from the LGN provide time synchronisation to the neocortex (defined as the location of the combination of connections of the visual cortex, motor cortex, auditory cortex, etc). The full image is therefore combined in the neocortex with other sensory modalities so that it receives information about the object from the eye, and all abstracts that make up the object. Spatial patterns in the visual cortex are formed from individual patterns illuminating the retina and memory is encoded by reverberatory loops of computational actions potentials (CAPs). We demonstrate that a similar process of PTC may take place in the cochlea and associated ganglia, as well as ascending information from the spinal cord, and that this function should be considered universal where convergences of neurons occur.

Since 2007, at the Electron Science Research Institute (ESRI) nano-fabrication laboratories, Edith Cowan University, Australia, we have devoted research efforts to the synthesis and characterization of bismuth-containing ferrite-garnet-type thin-film magneto-optic (MO) materials of different compositions. We report on the development and properties of highly bismuth-substituted iron-garnet thin films prepared by using radio frequency (RF) magnetron sputtering. We study the process parameters associated with the RF magnetron sputter deposition technique and investigate the results of optimizing process parameters and implementing several special techniques including the fabrication of co-sputtered nanocomposite films, all-garnet multilayer structures, applying oxygen plasma treatment on amorphous garnet layers just after the deposition process, and designing modifications of the annealing crystallization process and regimes for achieving the best MO properties. We demonstrated significant improvement in MO properties of Bi-containing ferrite-type garnet thin-film materials, including record-high MO figures of merit and improved conventional and un-conventional hysteresis loops of Faraday rotation. The attractive optical, magnetic, and magneto-optic properties obtained in highly bismuth-substituted iron garnet thin-film materials of multiple composition types are relevant in the context of manufacturing next-generation ultra-fast optoelectronic devices, such as light intensity switches and modulators, high-speed flat panel displays, and high-sensitivity sensors.

We report on the field testing datasets and performance evaluation results obtained from a commercial property-based visually-clear solar window installation site in Perth-Australia. This installation was fitted into a refurbished shopping centre entrance porch, and showcases the potential of glass curtain wall-based solar energy harvesting in built environments. In particular, we focus on photovoltaic (PV) performance characteristics such as the electric power output, specific yield, day-to-day consistency of peak output power, and the amounts of energy generated and stored daily. The dependencies of the generated electric power and stored energy on multiple environmental and geometric parameters are also studied. An overview of the current and future application potential of high-transparency, visually-clear solar window-based curtain wall installations suitable for practical building integration is provided.

Food allergy has been recognised by the World Health Organisation as a chronic disease that could lead to fatality. The symptoms can mediate from mild to severe consequences. Some cases have reported that food allergy sufferers are bullied and are discriminated at workplace, thus increasing their stress level, apart from facing difficulty in consuming certain food due to allergy. This has an adverse effect on the quality of life amongst food allergy sufferers. Medical bills are increased when food allergy sufferers become unknowingly exposed to food allergen. Hence, this study investigated food allergens among food allergy sufferers in order to make their lives better. A total of 250 respondents participated in an online survey. Surprisingly, apart from chicken, soybean and other food allergens that have been listed under the Big Eight Allergens, the respondents mentioned some fruits that could trigger allergic reactions, such as rambutans and watermelons. Food allergy sufferers can be allergic to seafood and seafood products as well, such as shrimp paste or locally known as belacan, which refers to fermented shrimp paste cured under the sun. It is a common food ingredient used among Malaysians. The study findings offer practical insights, such as avoidance of food allergens amidst food allergy sufferers and help the government to carefully manage for menu planning. The knowledge contribution of this study reveals several specific food and fruits, as aforementioned, which appear to be common and nutritious food, yet harmful to food allergy sufferers.

Large ruminant production in developing countries is inefficient with low growth rates and likely high greenhouse gas emissions (GHGe) per unit of meat or milk produced. Trials conducted in Lao PDR from 2017-2020, studied ad-libitum supplementation for 12 weeks with 20kg high quality molasses nutrient blocks (MNB; Four Seasons Pty Ltd, Brisbane, Australia), that were either: non-medicated (NMB); fenbendazole-medicated (FMB5, Panacur100®, Coopers Australia, @ 5g/kg); triclabendazole-medicated (TMB5 or TMB10, Fasinex®, Novartis Australia, @ 5g/kg or @ 10g/kg, respectively); or formulated with urea (UMB8 or UMB10 @ 8% or 10% urea, respectively). Average daily gains (ADG) were determined for access to all MNB’s and compared with access to NMB’s, no supplementation, or previously determined free-grazing baseline ADG’s (55–84g in cattle; 92–106g in buffalo). ADGs were significantly improved following access to all MNBs for periods up to 12wks. ADGs following access to UMB8 or NMB were calculated for three age cohorts of cattle: young calves <8m (238-298g), growing cattle (143-214g) and lactating cows (179-191g). Modelling using IPCC Inventory software model V 2.69 of published data demonstrated a conservative net abatement of 350kg CO2e was achievable over a 200 day feeding period. An additional trial of Emissions control blocks (EMB’s, n = 200) distributed to farmers (n = 60) and two educational institutions, was conducted. Consumption rates (156g/day) and farmer and institutional acceptance of EMB’s were similar to published findings with other MNB’s, confirming all MNB’s and EMB’s improved animal productivity and body condition score, with healthier animals that were easier to manage. Modelling of changes in GHGe intensity identified an abatement of 470kg CO2e per EMB consumed, delivering a total project emissions abatement of 94t CO2e. Provision of MNBs and EMBs in smallholder large ruminant production systems is likely to achieve impressive abatement of GHGe due to improved efficiency of rumen fermentation and productivity.

A new model predictive control (MPC) algorithm is used to select optimal air conditioning setpoints for a commercial office building, considering variable electricity prices, weather, occupancy and lighting. This algorithm, Cost-Comfort Particle Swarm Optimization (CCPSO), is the first to combine a realistic, smooth representation of occupants’ willingness to pay for thermal comfort with a bottom-up, non-linear model of the building and air conditioning system under control. We find that using a quadratic preference function for temperature can yield solutions that are both more comfortable and lower-cost than previous work that used a ``brick wall'' preference function with no preference for further cooling within an allowed temperature band and infinite aversion to going outside the allowed band. Using historical pricing data for a summer month in Chicago, CCPSO provided a 3\% reduction in costs vs. a ``brick-wall'' MPC approach with similar comfort and 13\% reduction in costs vs. a standard night setback strategy. CCPSO also reduced peak-hours demand by 3\% vs. the ``brick-wall'' strategy and 15\% vs. standard night-setback. At the same time, the CCPSO strategy increased off-peak energy consumption by 15\% vs. the ``brick-wall'' strategy. This may be valuable for power systems integrating large amounts of renewable power, which can otherwise become uneconomic due to saturation of demand during off-peak hours.

In recent years, the production of cement has grown globally in a very rapid manner due to the modernization of the world we live in, and after fossil fuels and land-use change, cement production is the third-largest source of anthropogenic emissions of carbon dioxide, CO₂. Cement being the primary binding material for concrete and with the prospects for the concrete industry continues to grow so will the emissions of CO₂. Hence, a method to reduce the CO₂ production while keeping up with the progression of the concrete industry is very crucial in current times. This is where CO₂ sequestration comes in. It is a process where CO₂ is converted into a mineral which will then be trapped into the concrete forever. Required data to carry out the research between CO₂ sequestered concrete and concrete without CO₂ have been observed, obtained and tabulated as necessary. These data are then used to compare the concrete samples with one another and also prove the theoretical effects of CO₂ exposure to concrete. Hence, experimental results on the compressive strength of the concrete samples for 7, 14 and 28 days has also been tabulated, graphed and further disputed. The objective of this research is mainly to determine the compressive strength of CO₂ sequestered concrete in comparison with concrete without CO₂ in order to decrease the effects the concrete industry has on the environment. The compressive strength of concrete samples with sequestration of CO₂ gas is expected to be higher than of the concrete without CO₂.

Creatine is a popular ergogenic aid among athletic populations with consistent evidence indicating that creatine supplementation also continues to be commonly used among adolescent populations. In addition, the evidence base supporting the therapeutic benefits of creatine supplementation for a plethora of clinical applications in both adults and children continues to grow. Among pediatric populations, a strong rationale exists for creatine to afford therapeutic benefits pertaining to multiple neuromuscular and metabolic disorders, with preliminary evidence for other subsets of clinical populations as well. Despite the strong evidence supporting the efficacy and safety of creatine supplementation among adult populations, less is known as to whether similar physiological benefits extend to children and adolescent populations, and in particular those adolescent populations who are regularly participating in high-intensity exercise training. While limited in scope, studies involving creatine supplementation and exercise performance in adolescent athletes generally report improvements in a number of ergogenic outcomes with limited evidence of ergolytic properties and consistent reports indicating no adverse events associated with supplementation. The purpose of this article is to summarize the rationale, prevalence of use, performance benefits, clinical applications, and safety of creatine use in children and adolescents.

The efficacy of predicting geochemical parameters with a 2-chain workflow using spectral data as the initial input is evaluated. Spectral measurements spanning the approximate 400-25000nm spectral range are used to train a workflow consisting of a non-negative matrix function (NMF) step, for data reduction, and a random forest regression (RFR) to predict 8 geochemical parameters. Approximately 175000 spectra with their corresponding chemical analysis were available for training, testing and validation purposes. The samples and their spectral and chemical parameters represent 9399 drillcore. Of those, approximately 20000 spectra and their accompanying analysis were used for training and 5000 for model validation. The remaining pairwise data (150000 samples) were used for testing of the method. The data are distributed over 2 large spatial extents (980 km2 and 3025 km2 respectively) and allowed the proposed method to be tested against samples that are spatially distant from the initial training points. Global R2 scores and wt.% RMSE on the 150000 validation samples are Fe(0.95/3.01), SiO2(0.96/3.77), Al2O3(0.92/1.27), TiO(0.68/0.13), CaO(0.89/0.41), MgO(0.87/0.35), K2O(0.65/0.21) and LOI(0.90/1.14), given as Parameter(R2/RMSE), and demonstrate that the proposed method is capable of predicting the 8 parameters and is stable enough, in the environment tested, to extend beyond the training sets initial spatial location.

Complaint of transient impairment or loss of memory as an attendant feature in some migraine attacks has long been recognised. In some cases, migraine may be a trigger or precipitating factor for the syndrome of transient global amnesia (TGA). However, the exact frequency of this concurrence is unknown, perhaps related to the absence from the International Classification of Headache Disorders (ICHD3) of amnesia or memory loss symptoms in association with migraine, unlike the situation with epileptic seizure (migralepsy) or stroke (migrainous infarction). Similarly, headache has generally been regarded as an incidental feature of TGA, reported in about 10% of cases. We present further examples of TGA in the context of migraine headache; consider possible reasons why this concurrence might be under-recognised, such as the retrograde amnesia characteristic of TGA; review possible shared pathogenetic mechanisms; and suggest a new terminology, “migramnesia”, which may encourage clinicians to address the possible significance of migraine in the context of an episode of TGA.

Bodybuilders utilize peaking strategies in a bid to fine-tune their aesthetics for competition day. The most prevalent peaking strategies utilized by natural bodybuilders are unreported in the current literature. Eighty-one (M - 59, F - 22) natural bodybuilders were recruited from competitions during the 2016 and 2017 British Natural Bodybuilder Federation seasons. Competitors completed a 34-item questionnaire designed to investigate peaking and contest day strategies. The questionnaire listed commonly utilized peaking strategies and provided additional space for qualitative information. Analysis of the data indicated that carbohydrate (CHO), water and sodium manipulation were the most commonly utilized peak week strategies. The consumption of high glycemic index CHO was the most common competition day strategy. Only 6.2 % of competitors reported following their regular diet the week prior to competition. The CHO manipulation strategies were similar to classical CHO loading, whereby bodybuilders attempt to maximize muscle glycogen concentrations. Furthermore, bodybuilders attempted to remove superfluous water by exploiting the diuretic/polyuria effect associated with water loading/restriction. The potentially deleterious effects of peaking on bodybuilders' health is considered and the efficacy of these strategies to enhance appearance is discussed. The findings of the present investigation are likely to be of interest to bodybuilders and their coaches.

The three-component reaction of enaminones, benzaldehyde and hydrazine-HCl or four-component reaction of enaminones, benzaldehyde, hydrazine–HCl and ethyl cyanoacetate in water in the presence of catalytic amount of ammonium acetate has been devised as a straightforward , sustainable approach for the synthesis of 1-H-pyrazole, N-aminopyridine and pyrazol[3,4-b]pyridine derivatives . The key benefits of this approach is simple experimental procedure associated with cost effective and environmentally friendly techniques.

Objective: The objective of this review was to establish a modified meta-ethnography framework by integrating the traditional phases with methods from social constructivist grounded theory. The modified version was required to identify methods which can ensure analytic generalisability and honour critical inquiry. Method: A narrative synthesis review was undertaken using 4 electronic databases. Articles were located that described the methods and methodologies of meta-ethnography and social constructivist grounded theory. A synthesis was undertaken which integrated the methods of social constructivist grounded theory. Results: The meta-ethnography was undertaken in 5 phases: (1) The positionality of the researcher and the area of interest identified. (2) Identifying what is relevant. (3) Reading the study and determining how studies are related. (4) The iterative process of idea generation required for theory generation. And (5) Expression of the theory, model, or process. Conclusion: The current study provides a useful tool to support the development of a substantive theory (a theory in one area) which can be used then to consider its application in other areas. This approach will help create new lines of research and aid the explanation of problems in other areas.

In previous work, a quantum mathematical formalism associated an element of experience with a single sensory neuron, as a local reduction of a global mental state. In contrast to the binary objective states of neuronal polarisation/depolarisation, neuronal experience was modeled as a continuous variable, the instantaneous value of which could only be estimated statistically from an ensemble of evoked responses to stereotyped stimulus presentation. In the present work, the quantum operations formalism of energy dissipation through amplitude damping is adopted to explain how smooth evolution of conscious experience might arise from discrete spikes and discontinuous synaptic transmission between neurons.

An event occurring within a stationary environment, in the direction toward which an observer self-rotates, is perceived to precede a simultaneous event, in the direction away from which she moves. When self-rotation results from angular acceleration in the dark, perception of space is also distorted, such that the subjective straight-ahead shifts in the opposite direction to motion and temporal event promotion. A reference frameshift theory, based on the special theory of relativity, is proposed to explain these findings. Here, a hyperbolic tangent transformation of objective angular velocity constrains subjective self-rotation velocity within finite bounds, consistent with it being a limited perceptual resource. Identifying this subjective variable with vestibular nystagmus slow-phase angular velocity, the asymptotic perceived self-rotation velocity is estimated at ~200 °⁄s. When included in the Lorentz transformations of the new formalism, this value predicts experimental simultaneity distortion. Hypothetically, the hyperbolic tangent objective-to-subjective transfer function would maximize the differential entropy of the percept, and thereby also the stimulus/percept mutual information, if angular velocities of body rotation encountered in naturalistic environmental interaction have a logistic probability density distribution of scale 100 °⁄s, a proposed experimental test of the scheme.

We isolated two highly pathogenic avian influenza viruses (HPAIVs) of subtype H5N8 clade 2.3.4.4b from falcated duck (Anas falcata) feces and environmental water collected at an overwintering site in Japan. Our isolates were almost genetically identical to each other and showed high genetic similarity with H5N8 HPAIVs recently isolated in South Korea, a distant part of Japan, and European countries. These results suggest the potential role of falcated ducks in the dissemination of HPAIVs.

Abstract: Background: Recently, cardiorespiratory fitness (CRF) has been postulated as an adverse health outcome related to poor sleep quality. However, studies investigating the relationship between CRF with subjective sleep quality index are scarce. Thus, the current study aimed to investigate the association between CRF and Pittsburgh sleep quality index (PSQI) in apparently healthy people. The secondary aim was to investigate the association between reported physical activities (PA) and PSQI. Methods: 33 apparently healthy male participants volunteered to participate. CRF (VO2 peak) was measured via cardiopulmonary exercise testing on a treadmill. A short form of the International physical activity questionnaire (IPAQ) was used to measure PA, and PSQI was used for sleep quality index. Results: There was no correlation between CRF and PSQI total score or any component of the PSQI. Also, there was no correlation between IPAQ and PSQI total score. Categorical data analysis of the two questionnaires revealed that 45.5% of the participants reported low physical activity and poor sleep quality. Conclusions: There was no association between CRF, reported PA with subjective sleep quality index. The use of objective tools for assessing the quality and quantity of sleep should be recommended for future studies as it may clarify the association between CRF and sleep quality.

With the emergence of artificial intelligence (AI), many aspects of our lives, from how we work to how we interact with each other and the world around us is showing dramatic changes. Education is one of the key areas that may be impacted by the rise of AI. Although a large number of studies have been conducted in recent years to shed light on how AI may influence various dimensions of education, a very little work has been carried out to consolidate and synthesis empirical studies on the application of AI in higher education. The present study reviewed empirical studies published between 2013 and 2022 to 1) examine the characteristics of published research in the field, and 2) to present thorough insights on the promises and challenges of this dramatic technology in higher and professional education. This review included 44 empirical studies published as peer-reviewed journal articles. The results indicated that there is rapid increase in the publications focusing on AI in higher education in last a few years. However, a big proportion of these publications are technically theoretical and conceptual proposals for AI intervention. The areas of AI applications in higher education that are supported by evidence based research are presented. Imperative implications are also highlighted for future research and implementation of AI based interventions in higher education.

Electricity demand forecasting plays a significant role in energy markets. Accurate prediction of electricity demand is the key factor to optimize power generation, consumption, saving energy resources, and determining the energy prices. However, integrating energy mix scenarios, including solar and wind power which are highly non-linear and seasonal, into an existing grid increases uncertainty in generation, adds the challenges for precise forecast. To tackle these challenges, state-of-the-art methods and algorithms have been implemented in literature. We have developed Artificial Intelligence (AI) based deep learning models that can effectively handle the information of long time-series data. Based on the pattern of dataset, four different scenarios were developed and two best scenarios were selected for prediction. Dozens of models were developed and tested in deep AI networks. In the first scenario (Scenario1), data for weekdays excluding holidays was taken and in the second scenario (Scenario2) all the data in the basket was taken. Remaining two scenarios, weekends and holidays were tested and neglected because of their high prediction error. To find the optimal configuration, models were trained and tested within a large space of alternatives called hyper-parameters. In this study, an Aritificial Neural Network (ANN) based Feed-forward Neural Network (FNN) showed the minimum prediction error for Scenario1 while a Recurrent Neural Network (RNN) based Gated Recurrent Network (GRU) showed the minimum prediction error for Scenario2. While comparing the accuracy, the lowest MAPE of 2.47% was obtained from FNN for Scenario1. When evaluating the same testing dataset (non-holidays) of Scenario2, the RNN-GRU model achieved the lowest MAPE of 2.71%. Therefore, we can conclude that grouping of weekdays as Senario1 prepared by excluding the holidays provides better forecasting accuracy compared to the single group approach used in Scenario2, where all the dataset is considered together. However, Scenario2 is equally important to predict the demand for weekends and holidays.

Plants especially in their natural habitat are considered part of a rich ecosystem that includes many various microorganisms in the soil. The current study aimed to identify the bacterial profile of agriculture-related soil samples using the metabarcoding technique to compare and explore relevant rhizosphere bacteria associated with plant cultivations in newly reclaimed land and habitual cultivated ones. Total environmental DNA was extracted from rhizosphere and non-cultivated samples derived from three land types in Egypt. The bacterial 16S rDNA was amplified and sequenced by NGS technology to profile each sample. The microbial profile was characterized by statistical and literature-based methods. Among all samples, the most identified phyla were Actinobacteriota (28%), followed by Proteobacteriota (26%), Firmicutes (14%), Ac-idobacteriota and Chloroflexi (7%), Gemmatimonadota (5%), Bacteriodota and Crenarchaeota (3%), and Myxococcota (2%), in addition to 37 other phyla with <1% counts. A total of 74 OTU was unique to the plant rhizosphere area and classified as Bacteriodota (5.1%:0.3%), Firmicutes (2.4%:0.1%), and Proteobacteria (3.5%:2%) phyla in agriculture and reclaimed lands, respectively. Moreover, the rhizosphere profile included a large portion of uncultured and unidentified bac-terial species, which opened a window to further analysis. Our analysis provides a key Knowledge about the rhizosphere microbiome and highlights its possible use to create microbial-based bi-ofertilizers targeting plant performance in contrast to traditional fertilizers and their side effect on the agriculture sector.

Studies on crop response to light quality [red (R) to far-red (FR) light ratio] often recommend early weed removal to reduce the effects of shade avoidance responses on crop yield. However, it is unclear whether crops are able to distinguish reflected light quality of kin from that of non-kin. We evaluated the response of sugarbeet (Beta vulgaris L.) to reflected FR light from sugarbeet, common lambsquarters (Chenopodium album L.), Kentucky bluegrass (Poa pratensis L.), alfalfa (Medicago sativa L.), and bare soil (control) under outdoor conditions in 2016 and 2017. Treatments were completely randomized with 10 replications per treatment. The study methods ensured there was no direct resource competition. The reflected R:FR of plant species ranged from 0.06 (common lambsquarters) to 0.24 (sugarbeet) compared to 0.7 for the bare soil. In both 2016 and 2017, there were 2 to 4 more leaves in the sugarbeet surrounded by soil compared to sugarbeet surrounded by neighboring species. There was up to 47, 57, 43, and 23% reduction in sugarbeet leaf area, shoot dry weight, root diameter, and root dry weight, respectively, due to reflected R:FR light from neighboring species. Sugarbeet did not respond differently to reflected light quality of kin compared to non-kin.

Disruptive selection arises when extreme phenotypes have a fitness advantage compared to more intermediate phenotypes. Theory and evidence suggest that intraspecific resource competition is a key driver of disruptive selection. However, while competition can be indirect (exploitative) or direct (interference), the role of interference competition in disruptive selection has not been tested, and most models of disruptive selection assume exploitative competition. We experimentally investigated whether the type of competition affects the outcome of competitive interactions using a system where disruptive selection is common: Mexican spadefoot toads (Spea multiplicata). Spea tadpoles develop into alternative resource-use phenotypes: carnivores, which consume fairy shrimp and other tadpoles, and omnivores, which feed on algae and detritus. Tadpoles intermediate in phenotype have low fitness when competition is intense, as they are outcompeted by the specialized tadpoles. Our experiments revealed that the presence of carnivores significantly decreased foraging behavior in intermediate tadpoles, and that intermediate tadpoles had significantly lower growth rates in interference competition treatments with carnivores but not with omnivores. Interference competition may therefore be important in driving disruptive selection. As carnivore tadpoles are also cannibalistic, the ‘fear’ effect may have a greater impact on intermediate tadpoles than exploitative competition alone, similarly to non-consumptive effects in predator-prey or intraguild relationships.

Early in the middle of the 1800s. Up until about 1900, the automotive land speed record 1 was held by an electrical vehicle. Unfortunately, internal combustion engine vehicles did not do 2 well in the market due to their high cost, limited speed, and short range in the 20th century, which 3 resulted in a global fall in their use as private motor vehicles. Since there are no fuel emissions into 4 the environment, there are important uses for electrical vehicles, Electric cars, or EVs, have a closed 5 circuit, cheap operating costs, no maintenance requirements, and excellent performance. The goal 6 of this project is to assess the current state of electric vehicles and the issues surrounding the global 7 advancement of electric vehicle technology. Because of the changing climate.8

The pathogenesis of transient global amnesia (TGA), a dramatic but self-limiting episode of anterograde amnesia with a variable duration of retrograde amnesia, remains unknown. Although most episodes are single, TGA has a finite recurrence rate. Studies of case series and large patient cohorts have typically been used to investigate possible precipitating and predisposing factors for TGA. Study of recurrent TGA episodes in single cases might provide another way to address pathogenetic factors. A patient with recurrent TGA is presented to illustrate such considerations with respect to possible chronobiological factors in TGA pathogenesis.

We utilize how Weber in 1961 initiated the process of quantization of early universe fields to the problem of what may be emitted at the mouth of a wormhole. While the wormhole models are well developed, there is as of yet no consensus as to how, say GW or other signals from a wormhole mouth could be quantized, or made to be in adherence to a procedure Weber cribbed from Feynman, in 1961. In addition, we utilize an approximation for the Hubble parameter parameterized from Temperature using Sarkar’s H ~ Temperature relations, as given in the text . Finally after doing this we go to the Energy as E also ~ Temperature, and from there use E (energy) as ~ signal frequency. This gives us an idea of how to estimate frequency generated at the mouth of a wormhole.