There are no investigations about the outcomes of idiopathic PVCs catheter ablation (CA) in athletes compared to sedentary population. We conducted a prospective single-centre observational study. The primary and secondary procedural outcomes were premature ventricular contractions (PVCs) post-ablation reduction in athletes vs. non-athletes group and in agonist vs. leisure-time athletes. The third was the evaluation of the resumption of physical activity and the improvement of symptoms in agonist and leisure-time athletes. From January 2020 to October 2022 we enrolled 79 patients with RVOT/LVOT/fascicular PVC presumed origin. The median percentage of decrease between the pre-procedure and post-procedure Holter monitoring in non-athletes group was 96 (IQR 68 – 98) and 98 in athletes group (IQR 92 – 99) (p=0,08). Considering the athletes, the median percentage of decrease in PVCs number was 98 (IQR 93-99) and 98 (IQR 87-99) respectively in leisure-time and agonistic athletes (p=0,42). Sixteen (70%) leisure time and 17 (90%) agonist athletes (p=0,24) have resumed physical activity 3 months after PVCs CA; among agonistic athletes, 59% have resumed competitive physical activity. Much of leisure-time (88%) and agonist (70%) athletes experienced an improvement in symptoms after ablation. PVC CA was effective and safe in both groups, reducing symptoms and allowing a quick and safe return to sports activities in athletes.

In this review, special emphasis will be placed on red grape polyphenols for their anti-oxidant and anti-inflammatory activities. Therefore, their capacity to inhibit major pathways responsible for activation of oxidative systems and expression and release of pro-inflammatory cytokines and chemokines will be discussed. Furthermore, regulation of immune cells by polyphenols will be illustrated with special reference to the activation of T regulatory cells which support a tolerogenic pathway at intestinal level. Furthermore, the effects of red grape polyphenols will be analyzed in obesity, as a low grade systemic inflammation. Also, possible modifications of inflammatory bowel disease biomarkers and clinical course have been studied upon polyphenol administration, either in animal models or in clinical trials. Moreover, the ability of polyphenols to cross the blood-brain barrier has been exploited to investigate their neuroprotective properties. In cancer, polyphenols seem to exert several beneficial effects, even if conflicting data are reported about their influence on T regulatory cells. Finally, the effects of polyphenols have been evaluated in experimental models of allergy and autoimmune diseases. Conclusively, red grape polyphenols are endowed with a great anti-oxidant and anti-inflammatory potential but some issues, such as polyphenol bioavailability, activity of metabolites and interaction with microbiota, deserve deeper studies.

The Active Distribution Networks (ADNs) are Multi-Input Multi-Output (MIMO) systems with coupled dynamics which cause interactions among the control loops of the Distributed Energy Resources (DERs). This undesired effect lead to performance degradation in the voltage control. To mitigate the effects of these unavoidable coupling, the present paper proposes a systematic design procedure based on the analysis of the interaction's sources. In details, each DER is equipped with a double loop PI to control the active and reactive powers output by the Voltage Source Converter (VSC) which connects the DER to the network's node. Furthermore, to guarantee Ancillary Services (ASs), the two loops are coupled by a simple mechanism of cooperation of the active power to voltage regulation realized by a filtered droop law. To achieve voltage regulation with reduced loop interactions, the PI parameters and the filter's pulse are designed according to a two sequential steps procedure based on the (Internal Model Control) IMC technique. Simulation studies are finally presented to demonstrate that the proposed design method achieves both reduction of the loop interaction and robust voltage control in presence of model parameter uncertainty in the MIMO model.

High Vacuum Flat Plate Collectors (HVFPCs) are the only type of Flat Plate Thermal Collectors capable of producing thermal energy for middle-temperature applications (until 180 °C). As the trend of research plans to develop new Selective Solar Absorbers to extend the range of HVFPC application until 250 °C, it is necessary to correctly evaluate the collector efficiency up to such temperature to predict the energy production accurately. We propose an efficiency model for these collectors based on the selective absorber optical properties. The proposed efficiency model explicitly includes the radiative heat exchange with the ambient, which is the main source of thermal losses for evacuated collectors at high temperatures. It also decouples the radiative losses that depend on the optical properties of the absorber adopted from the other thermal losses due to HVFPC architecture. The model has been validated by applying it to MT-Power HVFPC manufactured by TVP-Solar, and it has been used to predict the efficiency and energy production of HVFPC equipped with new, optimized selective solar absorbers developed in recent years.

Mitral regurgitation (MR) is a broadly diffuse valvular heart disease (VHD) with a significant impact on healthcare system and patient’s prognosis. Transcatheter mitral valve interventions (TMVI) are now well-established techniques included in the therapeutic armamentarium for managing patients with mitral regurgitation, either primary or functional MR. Even if guidelines give indications regarding the correct management of this VHD, the wide heterogeneity of patient’s clinical background, valvular and heart’s anatomy make each patient a unique case, in which the appropriate device’s selection requires a multimodality imaging evaluation and a multidisciplinary discussion. Proper pre-procedural evaluation plays a pivotal role to judge the feasibility of TMVI, as well as a cooperative works between imagers and interventionalist is crucial for procedural success. This manuscript aims to provide an exhaustive overview of the main parameters that need to be evaluated for appropriate device selection, pre-procedural planning, intraprocedural guidance and post-operative assessment in the setting of TMVI. In addition, it tries to give some insights about next perspective of structural cardiovascular imaging.

Transdermal drug delivery systems have become an intriguing research topic in healthcare technology and one of the most frequently developed pharmaceutical products in the global market. In recent years, researchers and pharmaceutical companies have made significant progress in developing new solutions in the field. This study sheds light on current trends, collaboration patterns, research hotspots, and emerging frontiers of transdermal drug delivery. Herein, a bib-liometric and patent analysis of data recovered from Scopus and The Lens databases, respectively, is reported over the last 20 years. From 2000 to 2022, the annual global publications increased from 131 in 2000 to 659 in 2022. Researchers in the United States, China, and India produced the highest number of publications. Likewise, most patent applications have been filed in the USA, China, and Europe. The recovered patents are 7,275, grouped into 2,997 patent families, of which 314 were granted. This study could support the work of decision-makers, scientific managers, or scientists to create new business opportunities or save money, time, and intellectual capital, thus, defining when a research or technology project should be a priority or not.

An efficient, eco-compatible and very cheap method for the construction of triazoles via eliminative azide–olefin cycloaddition (EAOC) reaction has been developed by a catalytic system IL/FeCl3, offering an highly regioselective approach to structurally diverse 1,5-disubstituted 1,2,3-triazoles in up to 95% yield. This strategy features the reuse of catalytic system through simple operations. Mechanistic studies indicated that an asynchronous concerted dipolar cycloaddition-elimination process might be involved.

This work deals with the performance evaluation of novel flat photovoltaic-thermal (PV-T) modules under vacuum. Through a 1D (dimensional) steady-state-energy-balance numerical model developed in MATLAB, two different layouts are studied: the first consisting of a photovoltaic (PV) cell installed just below the glass encapsulating the flat panel, and the second where the PV cell is placed on the selective solar absorber (SSA). In both cases the thermal and electrical efficiencies have been evaluated at different SSA operating temperatures, in the range of 323 K to 423 K. The analysis has been conducted at different energy bandgap (E_bg) of the PV cell and assuming a variable transmittance or emittance of the PV cell, depending on the design. The two systems efficiency comparison has been carried out at the same operating temperature. Overall, this work highlights the importance of high vacuum insulation, which guarantees the reduction of convective thermal losses, and shows that the maximum energy is produced for PV cells with E_bg ≈1.5-1.7 eV, depending on layout and operating temperature, by including the thermal output in the PV-T optimization. The energy and exergy efficiencies obtainable using the proposed PV-T systems are considerably improved compared to the results previously reported in the literature.

A simple procedure to obtain 1,5-disubstituted 1,2,3-triazoles, using the catalytic system erbium(III) trifluoromethanesulfonate, 1-methyl pyridinium trifluoromethanesulfonate and water is described. The reaction proceeds through an eliminative azide–olefin cycloaddition (EAOC) offering a highly regioselective approach and good yields (81–94%). The advantages of this method include simple operations of work-up and the ability of the catalytic system to be re-used five times without an evident loss in yield.

Melatonin is a ubiquitous molecule found in living organisms, ranging from bacteria to plants and mammals. It possesses various properties, partly due to its robust antioxidant nature and partly owed to its specific interaction with melatonin receptors present in almost all tissues. Melatonin regulates different physiological functions and contributes to the homeostasis of the entire organism. In the human eye, a small amount of melatonin is also present, produced by cells in the anterior segment and the posterior pole, including the retina. In the eye, melatonin may provide antioxidant protection along with regulating physiological functions of ocular tissues, including intraocular pressure (IOP). Therefore, it is conceivable that the exogenous administration of sufficiently high amounts of melatonin to the eye could be beneficial in several instances: for the treatment of eye pathologies like glaucoma, due to the IOP-lowering and neuroprotection effects of melatonin; for the prevention of other dysfunctions, such as dry eye and refractive defects (cataract and myopia) mainly due to its antioxidant properties; for diabetic retinopathy due to its metabolic influence and neuroprotective effects; for macular degeneration due to the antioxidant and neuroprotective properties; and for uveitis, mostly owing to anti-inflammatory and immunomodulatory properties. This paper reviews the scientific evidence supporting the use of melatonin in different ocular districts and provides data suggesting that the topical administration of melatonin as eye drops is a real possibility. This way, its distribution and concentration in different ocular tissues may support its pleiotropic therapeutic effects.

Traditional methodologies for measuring combat effectiveness rely on various contribution factors, where the main challenge lies in the complexity and subjectivity of these factors. Using frontline variation to measure combat effectiveness circumvents the limitations of many previous methods regarding complexity and subjectivity. Employing this methodology, we have quantitatively measured the combat effectiveness of both parties in the Russo-Ukrainian War across various temporal scales. Utilizing the time series data derived from our measurements, we constructed Daily, Weekly, Monthly, and Annual Candlestick Charts to illustrate the variation trends in combat effectiveness between the two sides across different temporal scales. This comprehensive approach facilitated a nuanced and all-encompassing analysis of the conflict, capturing the intricate dynamics of individual military engagements and the broader strategic operations' context. This case underscores the distinctive utility of our method in quantifying combat effectiveness, offering detailed and strategically significant insights.

Retroaortic left renal veins are an often overlooked, but no so rare anatomic anomaly that might cause a few aspecific symptoms and signs, especially flank or inguinal pain, microscopic or even gross hematuria; in the vast majority of cases it is, thought, totally asymptomatic. The nutcracker syndrome that might arise in the case of RLRV is mainly due to the re- duced space between aorta and the vertebral body and the consequent compression on the venal rein; this might in turn cause upstream hypertension, hematuria, varicocele, pain. The compression of RLRV leads to hematuria because of renal venous hypertension, consequent left renal congestion. This upstream venous congestion might result, in some cases, in left-sided varicocele in men and pelvic congestion syndrome in women. From a radiologic point of view, the presence of RLRV and the precise reporting its subtypes is mandatory.

(1) Context: Cancer triggers significant changes in family dynamics. It is noteworthy that coping and problem-solving skills, particularly in situations involving cancer in children and adolescents, have not been adequately explored in the context of family adaptation. This study aims to analyze the effectiveness of family interventions in coping to improve problem-solving skills in parents and/or caregivers of children and adolescents during and after oncological treatment. (2) Methods: This is a scoping review following the recommendations of the Joanna Briggs Institute and the Systematic Reviews and Meta-Analyses Extension for Scoping Review (PRISMA-ScR), from 2014 to 2024, in the databases LILACS, CINAHL, SCOPUS, Web of Science, and PUBMED. (3) Results: Forty-five studies were eligible. Coping strategies were categorized as follows: (1) positive attitudes (including a sense of courage and hope, family support to enhance resilience, and future planning), (2) caregiver empowerment (involving acceptance of diagnosis, emotional distancing, and coping through religiosity), and (3) communication skills (encompassing professional communication, horizontal dialogue with healthcare teams, and sincere communication with friends and family). (4) Conclusions: Over time, families develop coping and problem-solving strategies that influence changes in family functioning patterns, aiding them in accepting, reinterpreting, and reframing ideas and feelings associated with neoplasia.

Background: Fabry disease cardiomyopathy (FDCM) has manifested some resistance to enzyme replacement therapy (ERT) particularly in its advanced phase. Recently myocardial inflammation of autoimmune origin has been demonstrated in FDCM. Aims: Aim of the study is the assessment of circulating anti-globotriaosylceramide (GB3) antibody as biomarker of myocardial inflammation in FDCM. Its sensitivity was based on the evidence of overlapping myocarditis at left ventricular endomyocardial biopsy. Methods and Results: From January 1996 to December 2021, 85 patients received in our Department the histological diagnosis of FDCM and 48 (56.5%) of them had an overlapping myocardial inflammation with negative PCR for the common cardiotropic viruses, positive anti-heart and anti-myosin abs. The presence of anti-GB3 antibodies was evaluated with an Elisa assay (BioGeM scarl Medical Investigational Research, MIR - Ariano Irpino, Italy) in the FDCM patients and compared with controls of healthy individuals. Circulating levels of anti-GB3 autoantibodies were compared with the presence or absence of myocardial inflammation at histology and with the severity of FDCM. The assay results showed that 42 out of 48 FDCM subjects with myocarditis were positive for anti-Gb3 antibodies while 30 out of 37 FDCM patients without myocarditis had negative anti-GB3 antibodies, with a sensitivity of 87.5 % and a specificity of 83.5%. Conclusions: The present study suggests a potential positive role of antiGB3 antibodies as marker of overlapping cardiac inflammation in patients with FDCM.

This study refers to the optimization of a Selective Solar Absorber to improve the Sun-to-thermal conversion efficiency at mid temperatures in high vacuum flat thermal collectors. Efficiency has been evaluated by using analytical formula and a numerical thermal model. Both results have been experimentally validated using a commercial absorber in a custom experimental set-up. The optimization procedure aimed at obtaining Selective Solar Absorber is presented and discussed in the case of a metal dielectric multilayer based on Cr2O3 and Ti. The importance of adopting a real spectral emissivity curve to estimate high thermal efficiency at high temperatures in selective solar absorber is outlined. Optimized absorber multilayers can be 8% more efficient than the commercial alternative at 250 °C operating temperatures and up to 27% more efficient at 300 °C. Once the multilayer has been optimized the choice of a very low emissivity substrate such as copper allows to further improve efficiency and to reach stagnation temperature higher than 400 °C without Sun concentration.

Migraine is a debilitating neurological condition affecting millions of people worldwide. Until few years ago, preventive migraine treatments were based on molecules with pleiotropic targets, developed for other indications and discovered by serendipity to be effective in migraine prevention although often burdened by tolerability issues leading to low adherence. However, the progresses in unravelling the migraine pathophysiology allowed to identify novel putative targets as calcitonin gene-related peptide (CGRP). Nevertheless, despite the revolution brought by CGRP monoclonal antibodies and gepants, a significant percentage of patients still remains burdened by an unsatisfactory response suggesting that other pathways may play a critical role with an extent of involvement varying among different migraine patients. Specifically, neuropeptides of the CGRP family as adrenomedullin and amylin, molecules of the secretin family as pituitary adenylate cyclase-activating peptide (PACAP) and vasoactive intestinal peptide (VIP), receptors as transient receptor potential (TRP) channels, intracellular downstream determinants as potassium channels but also the opioid system and the purinergic pathway have been suggested to be involved in migraine pathophysiology. The present review provides an overview of these pathways highlighting, based on preclinical and clinical evidences as well as provocative studies, their potential role as future targets for migraine preventive treatment.

The transition from Building Information Modelling (BIM) to Heritage Building Information Modelling (H-BIM) is intended to pursue an adequate knowledge of the artefact that is to be preserved, progressively replacing the traditional methods of the restoration and structural reinforcement projects with new tools for managing both existing information and new interventions. The aim of the paper is to show the application of the H-BIM method to a stone pavement road located in the Archaeological Site of Pompeii. In detail, starting from a Laser Scanner based survey, juxtaposed by coordinated points georeferenced through a total station, points clouds were handled by means of several BIM-based tools to perform the road design process, starting from the digital elevation model (DEM) to the corridor representation. Subsequently, a visual programming application based on Python language was adopted to update corridor information by means of the object property set. As preliminary results, a tool, complete with graphical and non-graphical information, is proposed to be used in conservation, maintenance and restoration project.

Optical characterization and thermal aging tests are performed on a sputter-deposited coating, consisting of SiO₂/Cr₂O₃/Cr/Cr₂O₃ layers, designed and developed as a selective solar absorber to be used for unconcentrated solar thermal applications. Both measurements are performed by using a home-made apparatus, which mimics a flat plate collector under high vacuum. A Performance Criterion (PC_η(T)), based on absorber efficiency is proposed, and a forecast of service lifetime is obtained. As a result of the thermal aging tests, the selective solar absorber under study appears to be highly efficient at mid temperatures (up to 573 K) and thermally stable at temperatures (up to 690 K).

Cancer cells show an increased glutamine consumption. The glutaminase (GLS) enzyme controls a limiting step in the glutamine catabolism. Breast tumors, especially the triple negative subtype, have a high expression of GLS. Our recent study demonstrated that GLS activity and ammonia production are inhibited by Sirtuin 5 (SIRT5). We have developed MC3138, a selective SIRT5 activator. Treatment with MC3138 mimicked the deacetylation effect mediated by SIRT5 overexpression. Moreover, GLS activity is regulated by inorganic phosphate (Pi). Considering the interconnected role of GLS, SIRT5 and Pi for cancer growth, our hypothesis is that activation of SIRT5 and reduction of Pi could represent a valid anti-tumoral strategy. Treating cells with MC3138 and lanthanum acetate, a Pi chelator, decreased cell viability and clonogenicity. We also observed a modulation of LC3 and ULK1 with MC3138 and lanthanum acetate. Interestingly, inhibition of mitophagy marker BNIP3 was observed only in the presence of MC3138. Such autophagy and mitophagy modulation was accompanied by an increase of cytosolic and mitochondrial reactive oxygen species (ROS). In conclusion, our results show how SIRT5 activation and/or Pi binding can represent a valid strategy to inhibit cell proliferation by reducing glutamine metabolism and mitophagy leading to a deleterious accumulation of ROS.

We investigate the performance of a novel flat photovoltaic-thermal (PV-T) module under high-vacuum through a 1D numerical model based on steady-state energy balance, with the aims of optimizing the simultaneous production of thermal and electrical energy. In the proposed design, the photovoltaic (PV) cell is positioned directly above the selective solar absorber (SSA), in a multilayer or fully integrated PV-SSA structure, which allows full exploitation of spectral solar radiation. In fact, in this configuration the losses related to non-absorption of low-energy photons and thermalization, typical of a classical single-junction PV cell, are reduced. The present study is conducted as the emittance and energy bandgap of the PV layer varied, thus admitting a wide variety of materials into the analysis. The dependence of the temperature coefficient, β(%/K), on the energy bandgap of the PV cell is also included. In the last part of the work, we discuss the performance of the proposed evacuated PV-T equipped with a SSA layer and thin film solar cells, namely those made of CdTe, CdS and GaAs. Overall, the paper highlights the great advantage of using high vacuum insulation, which suppresses conductive losses, and the versatility of the proposed system, which could be adapted to the user's needs simply by choosing the appropriate material for the photovoltaic layer.

Darier disease (DD) is an autosomal dominant disorder due to mutation of ATP2A2 gene causing an isolated skin manifestation based on keratinocyte disconnection and apoptosis. Systemic manifestations of DD have not been demonstrated so far although a high incidence of neuropsychiatric syndromes suggest an involvement of central nervous system. A Novel ATP2A2 Gene Mutation c.118G>A, causing keratinocyte and cardiomyocyte disconnection in Darier disease, is reported. Their common pathologic pathway, still unreported, was documented by both skin and left ventricular endomyocardial biopsy because of cardiac dilatation and dysfunction appeared several decades after skin manifestations.Keratinocyte disconnection was paralleled by cardiomyocyte separation at lateral junction. Cardiomyocyte separation was associated to cell disarray, sarcoplasmic reticulum dilatation and increased myocyte apoptosis. Clinically, hyperkeratotic skin papules were associated to chest pain, severe muscle exhaustion and ventricular arrhythmias that improved following administration of aminophylline, a phosphodiesterase inhibitor enhancing SERCA2 protein phosphorylation.Specific mutations of ATP2A2 gene may cause cardiac involvement in patients with DD. Cardiac pathologic changes are similar to those documented in the skin including cardiomyocyte disconnection that promotes precordial pain and cardiac arrhythmias. Phosphodiesterase inhibitors, enhancing SERCA2 protein phosphorylation may substantially attenuate the symptoms.

Merkel cell carcinoma (MCC) is a rare, highly aggressive skin cancer characterized by two etiologies: the first one, observed in most cases, is attributed to Merkel cell polyomavirus (MCPyV), a DNA tumor virus, while the second one is due to ultraviolet (UV) radiation exposure. Currently, there are limited diagnostic, prognostic, and therapeutic biomarkers available for MCC. MicroRNAs (miRNAs) are small RNA molecules that do not code for proteins but regulate various cellular processes, including cell cycle progression, proliferation, differentiation, and apoptosis. The dysregulation of miRNAs has been associated with a wide range of cancers since they can act as either tumor suppressors or oncogenes. This paper aims to collect, summarize and re-organize the recent discoveries concerning miRNAs, whose dysregulation in the pathogenesis and progression of MCC is slowly emerging. Furthermore, the potential clinical applications of miRNAs as diagnostic biomarkers, possible differentiation between MCPyV-related and unrelated MCC, predictors of response to therapy and prognostics are also discussed. From this review, it emerges that miRNAs may have, in the near future, the potential to become clinically significant in improving the diagnostic accuracy, prognostic evaluation, and therapeutic options of MCCs. Finally, the new perspectives on the poorly explored field of artificial intelligence in MCC are provided.

Disease, trauma, and aging account for a significant number of clinical disorders. Regenerative medicine is emerging as a very promising therapeutic option. The design and development of new cell-customized biomaterials able to mimic ECM functionalities represent one of the major strategy to control the cell fate and stimulate tissue regeneration. Recently, hydrogels have received a considerable interest for their use in the modulation and control of cell fate during regeneration processes. Several synthetic bioresponsive hydrogels are being developed in order to facilitate cell-matrix and cell-cell interactions. In this review new strategies and future perspectives of such synthetic cell microenvironment will be highlighted.

In the quest for more efficient solar thermal systems, accurately determining the thermal emittance of low-emissive materials is crucial in determining the power losses. This paper describes the calorimetric method designed to precisely measure the thermal emittance of Selective Solar Absorbers (SSAs) to be used in High Vacuum Flat Plate Collectors (HVFPCs). The method's capability is demonstrated through the successful correction of thermal emittance values for copper samples of varying sizes, including dimensions down to 49 cm². Results highlight the method's potential to significantly reduce measurement errors associated with small-size and/or low-emittance samples, providing a path forward to improve the design and efficiency of SSAs. This research marks a significant step in advancing solar thermal technology by enabling emittance measurements with a precision better than 0.003, which is essential for the development of high-performance solar thermal absorbers. The method has also been applied to correct the thermal emittance value of SSA measured in previous measurement campaigns, and it allows a better estimation of the SSA efficiency conversion curve.

Nanocrystalline silicon oxide (nc-SiOx:H) is a multipurpose material with its varied application in solar cells as a transparent front contact, intermediate reflector, back reflector layer and even tunnel layer for passivating contacts, owing to easy tailoring of its optical properties. In this work, we systematically investigate the influence of gas mixture (SiH4, CO2, PH3 and H2), RF power and process pressure on the optical, structural and passivation properties of thin n-type nc-SiOx:H films prepared in an industrial, high throughput, plasma-enhanced chemical vapor deposition (PECVD) reactor. We provide a detailed description of the n-type nc-SiOx:H material develop-ment using various characterization techniques (SEM, EDX, Raman spectroscopy, and spectro-scopic ellipsometry) with a focus on the relationship between the material properties and the pas-sivation they provide to n-type c-Si wafers characterized by their effective carrier lifetime (τeff). Further, we also outline the parameters to be kept in mind while developing different n-type nc-SiOx:H layers for different solar cell applications. We report a tunable optical gap (1.8 – 2.3 eV) for our n-type nc-SiOx:H films as well as excellent passivation properties with τeff up to 3.5 ms (iVoc ~ 715 mV) before annealing. Oxygen content plays an important role in determining the crystallinity and hence passivation quality of the deposited nanocrystalline silicon oxide films.

Multirotors are gaining great importance in the layout of innovative and more agile mobility. In this framework, a possible solution to developing an aircraft complying with the stringent size requirements characterizing this type of application can be a coaxial rotor configuration. To exploit the several possibilities linked to coaxial rotors, a scaled experimental model is designed to evaluate the performances of the counter-rotating propellers system, concerning the distance between the two propellers. Both thrust and noise are considered as parameters of interest. Two brushless motors are deployed whereas the propellers' angular velocity, in terms of round per minute (rpm), is controlled by an external control system. Tests are conducted on both single isolated propellers as well as on the counter-rotating system: the two propellers and their respective motors have been characterized concerning the thrust. Furthermore, a comparison with a numerical model is performed. Noise evaluation on the single propeller has shown a motor contribution prevalence at a low rpm regime (1140-1500 rpm) and a propeller prevalence for angular velocities higher than 1860 rpm. By varying the distances between the propellers a sensitivity analysis is performed with the aim of identifying the optimum configuration taking into account both noise and thrust performances.

The need to recycle carbon fibre reinforced composite polymers (CFRP) has grown significantly to reduce the environmental impact generated by their production. To meet this need, thermoreversible epoxy matrices have been developed in recent years. This study investigates the performance of an epoxy vitrimer made by introducing a metal catalyst (Zn2+) and its carbon fibre composites focusing on the healing capability of the system. The dynamic crosslinking networks endow vitrimers with interesting rheological behaviour, the capability of the formulated resin (AV-5) has been assessed by creep tests. The analysis showed increased molecular mobility above a topology freezing temperature (Tv). However, the reinforcement phase inhibits the flow capability reducing the flow. The fracture behaviour of CFRP made with the vitrimeric resin has been investigated by Mode I and Mode II tests and compared with the conventional system. The repairability of the vitrimeric CFRP has been investigated by attempting to recover the delaminated samples, which yielded unsatisfactory results. Moreover, the healing efficiency of the modified epoxy composites has been assessed by using the vitrimer as an adhesive layer. The joints were able to recover about 84% of the lap shear strength of the pristine system.

The use of Attitude and Heading Reference Systems (AHRS) for orientation estimation is now common practice in a wide range of applications, e.g., robotics and human motion tracking, aerial vehicles and aerospace, gaming and virtual reality, indoor pedestrian navigation and maritime navigation. The integration of the high-rate measurements can provide very accurate estimates, but these can suffer from errors accumulation due to the sensors drift over longer time scales. To overcome this issue, inertial sensors are typically combined with additional sensors and techniques. As an example, camera-based solutions have drawn a large attention by the community, thanks to their low-costs and easy hardware setup; moreover, impressive results have been demonstrated in the context of Deep Learning. This work presents the preliminary results obtained by DOES , a supportive Deep Learning method specifically designed for maritime navigation, which aims at improving the roll and pitch estimations obtained by common AHRS. DOES recovers these estimations through the analysis of the frames acquired by a low-cost camera pointing the horizon at sea. The training has been performed on the novel ROPIS dataset, presented in the context of this work, acquired using the FrameWO application developed for the scope. Promising results encourage to test other network backbones and to further expand the dataset, improving the accuracy of the results and the range of applications of the method.

The idea of an extension of life for CubeSats is proposed to reduce space debris in a low-earth orbit. In this work, a gripper is designed for geometry-based grasping in berthing tasks. The grasping operation is outlined for square- and rectangle-profiled CubeSats. Equilibrium conditions are used to choose fingertips shape and parameters for grasping the CubeSat body. A design scheme is proposed to provide the required accuracy. A design concept is developed into a lab prototype by using low-cost 3D printing technique, and a mock-up grasping task that is representative of the berthing operation is evaluated with the lab prototype. Center-mass hanging setup for the prototype and grasped body is used to evaluate the impact of grasping, partially replicating the conditions in space by reducing the effect of gravity on the system.

Daridorexant, as the first Dual Orexin Receptor Antagonist (DORA) marketed in Europe, offers a novel therapeutic approach to insomnia. However, data regarding its real-world safety are scarce. Thus, the aim of this study was to assess its safety profile using a large-scale pharma-covigilance database. Daridorexant-related Adverse Drug Reaction (ADR) reports from the FDA Adverse Event Reporting System were scrutinized, and ADRs were selected using reporting odds ratio (ROR) as a measure of disproportionality. Frequencies of events related to daridorexant were compared to all other drugs (reference group, RG1) and only to other DORAs (RG2). Only significant disproportionalities to both RGs were evaluated in-depth. A total of 845 dari-dorexant-related reports were selected; nightmares (n = 146; Dari vs. RG1: ROR = 113.74; 95%CI[95.13, 136]; Dari vs. RG2: ROR = 2.35; 95CI%[1.93, 2.85]), depression (n = 22; Dari vs. RG1: 2.13; [1.39, 3.25]; Dari vs. RG2: ROR = 2.31; 95CI%[1.45, 3.67]), and hangover (n = 20; Dari vs. RG1: ROR = 127.92; 95CI%[81.98, 199.62]; Dari vs. RG2: 3.38; [2.04, 5.61]) were considered as safety signals. These data provide valuable insights into the real-world safety profile of dari-dorexant, supporting the existence of safety signals related to nightmares, depression, and hang-over.

Calcium sulphate (CS) is currently used as a bioabsorbable, completely synthetic and sterile material in the management of infected tissues and dead spaces (DS) mainly resulting from surgical procedures. Residual DS in the postoperative, may create an environment where hematomas fill up and bacteria can proliferate, leading to a high incidence of postoperative infections. Considering the available reviews in the literature, CS has been mainly studied in orthopedic surgery mostly giving brilliant results and low complication rates. Nowadays, orthopedists avail it in the form of pearls both as a bone void filler and as an “off-label” delivery agent for antibiotics in arthroplasty, chronic osteomyelitis and open fractures, paving the way of its application in many other contexts given its natural dis-position to biodegradation. In the last years, CS beads have been gaining ground in the general, vascular and endocrinological surgical specialties. Despite its clear potential and the increasing number of scientific evidences on the safety and effectiveness of CS application in the prophylaxis and treatment of infections, there are not many studies reporting on its application in fields other than orthopedics, with a substantial paucity in plastic and reconstructive surgery literature. This is some-how surprising, since reconstructive surgery often deals with complex wounds secondary to bone and soft tissue exposure, suture dehiscence, trauma, and surgical site infections. As far as we know this is the first updated systematic review assessing the state of the art, indications and new perspectives on the application of CS beads in plastic and reconstructive surgery.

In numerous instances, the fate of a single cell not only represents its peculiar outcome but also contributes to the overall status of an organism. In turn, cell division cycle and its control strongly influence cell destiny playing a critical role in targeting it towards a specific phenotype. Several factors participate to the control of growth and among them p27 and p57, two proteins modulating various transitions of cell cycle, appear to play key functions. In this review, the major features of p27 and p57 will be described, focusing in particular on their recently identified roles not directly correlated to cell cycle modulation. Then, their possible role as molecular effectors of polyphenols activities are discussed. Polyphenols represent a large family of natural bioactive molecules that have been demonstrated to play promising protective activities against several human diseases. Their use has also been proposed in association with classical therapies for ameliorating their clinical effects and for diminishing their negative side activities. The importance of p27 and p57 in polyphenol cellular effects will be discussed with the aim of identifying novel therapeutic strategies for the treatment of important human diseases, such as cancers, characterized by an altered control of growth.

(Background) Cognitive deficits related to frontotemporal dysfunction are common in Amyotrophic Lateral Sclerosis (ALS). Visuospatial deficits, related to posterior cerebral regions, are often underestimated in ALS, though they play a crucial role in attending daily living activities. Our pilot study aims at assessing visuospatial abilities using a domain-specific tool in ALS patients compared to healthy controls (HC). (Methods) Twenty-three patients with early ALS and 23 age- and education-matched HC underwent the Battery for Visuospatial Abilities (BVA), including visuo-perceptual and visuo-representational subtests. (Results) When compared to HC, ALS scored worse in 2 out of 4 visuo-perceptual subtests (i.e., Line Length Judgment and Line Orientation Judgment) and 1 out of 4 visuo-representational tasks (i.e., Hidden Figure Identification, HFI) (p <0.01). No correlations arose between ALS clinical features and BVA performance. More than 80% of the ALS cohort obtained abnormal scores in HFI subtest. (Conclusions) Our findings revealed that ALS scored worse (compared to HC) on selective tests tapping “perceptual” and “representational” visuospatial abilities, since early stages of disease. In clinical practice, our findings highlight the need of multi-domain neuropsychological assessment, for monitoring disease course and properly organizing care management of patients with ALS.

Multilayer absorbers based on Cr2O3 and Cr, designed to improve the Solar-to-thermal conversion efficiency at mid temperatures in high vacuum flat thermal panel, are fabricated via sputtering deposition on bulk copper substrates and characterized by thermal and optical analysis. The refractive index of the single layers has been measured and used to estimate absorber thermal efficiency at the operating temperatures. Multilayers have been produced via sputtering deposition on bulk copper substrates. The absorber multilayers can be 10% more efficient than the commercial alternative at 250 °C operating temperatures, reaching 380 °C stagnation temperature without Sun concentration. The thermal stability has been checked at temperature of 400 °C in vacuum for four hours. High vacuum flat thermal collectors, equipped with the produced selective solar absorbers can obtain unprecedented performances and can give important contribution to the energy transition from fossil fuels to renewable energy for efficient heat production.

Obturator herniæ are a quite rare type of abdominal hernia, accounting for less then 1% of all abdominal wall hernias and for 0.2-1.6% of patient with a small bowel obstruction. The obturator canal is the only portion of the obturator foramen that is not obliterated by the membrane of the same name and hosts the obturator neurovascular bundle; it is, for this reason, a locus minoris resistentiae, through which obturator hernias are formed, generally in elderly, multiparous women. Despite the fact that Computed Tomography offers the possibility of a quick, correct preoperative diagnosis, often signs and symptoms of obturator herniæ are quite unspecific; considering that, at the same time, patients with an obturator hernia are generally elderly, with concurrent conditions, this might cause delays in the diagnosis and treatment and produces the high postoperative mortality rates that obturator herniæ yield

The range of interactions between Cladosporium, an ubiquitous fungal genus, and insects, a class including about 60% of the animal species, is extremely diverse. The broad case history of antagonism and mutualism connecting Cladosporium and insects is reviewed in this paper based on the examination of the available literature. Certain strains establish direct interactions with pest or beneficial insects, or indirectly influence them through their endophytic development in plants. Entomopathogenicity is often connected to the production of toxic secondary metabolites, although there is a case where these compounds have been reported to favor pollinators attraction, suggesting an important role in angiosperm reproduction. Other relationships include mycophagy, which on the other hand may reflect an ecological advantage for these extremely adaptable fungi using insects as carriers for spreading in the environment. Several Cladosporium species colonize insect structures, such as galleries of ambrosia beetles, leaf-rolls of attelabid weevils and galls formed by cecidomyid midges, playing a still uncertain symbiotic role. Finally, the occurrence of Cladosporium in the gut of several insect species has intriguing implications in pest management, also considering that some strains have proven to be able to degrade insecticides. These interactions especially deserve further investigation to understand the impact of these fungi on pest control measures and strategies to preserve beneficial insects.

Among solar thermal collectors, the evacuated flat panel is emerging as a reference technology for operation at higher temperatures of up to 200 °C with an increased annual energy production owing to both direct and diffuse light capture. Accurate measurements of the optical properties of the selective absorbers used in such devices are key for a reliable estimation of the overall performance. These optical properties must be measured under high vacuum at high temperatures, conditions under which the panels are meant to operate. In this study, we accurately measured these properties using a calorimetric technique. The measurement procedure is based on a power balance equation for a flat sample suspended in a high-vacuum chamber with minimal thermal losses and is well adapted for this class of devices. Calorimetric measurements obtained under Sun and LED light revealed excellent reproducibility and good agreement with those obtained using traditional optical analysis at low temperatures in air. When extended up to the absorber stagnation temperature, which often exceeds 300 °C, the calorimetric measurements started to deviate from the optical measurements, indicating the importance of measuring under the operating conditions.

One of the main issues for underwater robots navigation is represented by the accurate vehicle positioning, which heavily depends on the orientation estimation phase. The systems employed to this scope are affected by different noise typologies, mainly related to the sensors and to the irregular noise of the underwater environment. Filtering algorithms can reduce their effect if opportunely configured, but this process usually requires fine techniques and time. This paper presents DANAE++, an improved denoising autoencoder based on DANAE, which is able to recover Kalman Filter IMU/AHRS orientation estimations from any kind of noise, independently of its nature. This deep learning-based architecture already proved to be robust and reliable, but in its enhanced implementation significant improvements are obtained both in terms of results and performance. In fact, DANAE++is able to denoise the three angles describing the attitude at the same time, and that is verified also on the estimations provided by the more performing Extended KF. Further tests could make this method suitable for real-time applications on navigation tasks.

Growth monitoring of crops is a crucial aspect of precision agriculture, essential for optimal yield prediction and resource allocation. Traditional crop growth monitoring methods are labor-intensive and prone to errors. This study introduces an automated segmentation pipeline utilizing multi-date aerial images and orthomosaics to monitor the growth of cauliflower crops (Brassica Oleracea var. Botrytis). The methodology employs YOLOv8, Grounding DINO, and the Segment Anything Model (SAM) for automatic annotation and segmentation. The YOLOv8 model was trained using initial datasets, which then facilitated the training of the Grounded SAM framework. This approach generated automatic annotations and segmentation masks, classifying crop rows for temporal monitoring and growth estimation. The study's findings highlight the efficiency of this automated system in providing accurate crop growth analysis, promoting informed decision-making in crop management and sustainable agricultural practices. Results indicate consistent and comparable growth patterns between aerial images and orthomosaics, with significant periods of rapid expansion and minor fluctuations over time. The integration of these advanced techniques demonstrates the potential for enhancing precision agriculture through reduced labor and increased accuracy in crop growth monitoring.

Brushless Synchronous Machines (BSM) are replacing conventional synchronous machines with static excitation in generation facilities due to the absence of sparking and lower maintenance. However, this excitation system makes challenging measuring electric parameters in the rotor. This fact highly difficult the detection of ground faults, which are the most common type of electrical fault in electric machines. In this paper, a ground fault detection method for BSM is proposed. It is based on an inductive AC/DC rotating current sensor installed in the shaft. In case of a ground fault in the rotating parts of the BSM, a fault current will flow through the rotor’s sensor, inducing voltage in its stator. Analyzing the frequency components of the induced voltage the detection of a ground fault in the rotating elements is possible. The ground faults detection method proposed covers the whole rotor and discern between DC and AC sides. To corroborate the detection method, experimental tests have been performed using a prototype of this sensor connected to laboratory synchronous machines achieving satisfactory results.

The fabrication of thin-film multilayer structures by sputtering technique usually requires multi-cathode deposition machine. This study proposes a simpler approach based on the RF power modulation: silicon nitride (SiN$_x$) thin films were prepared by RF reactive sputtering in (Ar + N$_2$) atmosphere at room temperature. The samples were analyzed to highlight the effects of different deposition conditions on the morphological and optical properties of the films in the visible and near/mid-IR regions. The refractive index of the films was changed in the range of 1.5 - 2.5 (at $\lambda$=800 nm) by tuning the sputtering power. IR reflectance measurements revealed the absence of spurious (oxygen- or hydrogen-based) phases, while atomic force and scanning electron microscopies confirmed the presence of flat and defect-free samples surfaces.

(1) Background: Grapes and their associated by-products (as grape pomace, GP) stand out for their polyphenol content, which makes them a source of bioactive compounds with antioxidant capacity. The aim of this research was to determine if the inclusion of 50 g/kg of GP in the diet of hens could enrich egg with antioxidants and to study its effect on internal and external egg quality parameters. (2) Methods: A trial was conducted with two genetic lines of hens, which were fed either a control diet or a diet containing 50 g/kg of GP. Performance, internal and external egg quality, and egg yolk content of vitamins E and A, and gallic acid were determined; (3) Results: In eggs laid by hens fed GP diet, Haugh units and yolk colour score were enhanced, and eggshell became thinner, but without affecting the breaking strength. No dietary effect was observed on vitamin contents in yolk. Higher gallic acid content was observed in yolk of eggs laid by hens fed the GP diet, suggesting that some dietary phenolic compounds could be transferred to the eggs. Hen genetics influenced egg weight, albumen Haugh units, shell thickness and α- and γ-tocopherol concentration in yolks; (4) Conclusions: Dietary inclusion of GP improved the internal quality of eggs, enriching yolks with a phenolic compound, but reduced shell thickness.

Circular Economy (CE) is a growing topic among scholars, industry and government aiming at decoupling economic growth and development from the consumption of finite resources. CE incorporates different meanings, from reduce, reuse and recycle activities to environmental degradation or resource scarcity, and supported by specific indicators to attain sustainable development. However, so far, there has been no agreement to measure how effective an industry/product is in making the transition from linear to circular approaches, particularly those affected the society. This research work aims to perform a systematic literature review (n=60) to analyze and discuss how social aspects have been considered and integrated in the CE research so far. Moreover, this review provides and overview of the literature on social impact within CE, that resulted in three main outputs: a knowledge map of the CE, an analysis of social aspects within CE, and the theories/frameworks used to evaluate social impact of CE. Finally, this study brings to light how CE implementation can affect society and highlights the importance of social dimension in the domains of CE and policy-making community, which could help moving CE towards a sustainable development.

Granulomatosis with polyangiitis (GPA), formerly known as Wegener’s granulomatosis, is a rare form of necrotizing granulomatous inflammation that predominantly affects medium and small size vessels. Generally respiratory tracts and kidneys are the most affected organs. Neurological manifestations of GPA usually involve the peripheral nervous system causing mononeuritis multiplex or and cranial nerve palsies. Central nervous system (CNS) involvement is rare and characterized by cerebral vasculitis, meningeal inflammation, or mass lesions. The CNS involvement is often linked to Ear Nose Throat (ENT) system disease. In this report, we present two cases of patients diagnosed with GPA who exhibit CNS involvement as first symptom. In the first one with an ischemic stroke while in the second with an atypical headache. In the first patient, a positive medical history indicating involvement of the Ear, Nose, and Throat (ENT) facilitated a precise diagnosis through the prompt execution of autoimmune screening. This, in turn, enabled a timely commencement of treatment, resulting in neurological improvement. In the second case, the significance of ENT involvement was initially overlooked in the context of pathological definition, leading to a substantial delay in diagnosis and an ultimately grim prognosis for the patient. The ENT involvement could be an easy marker to suspect GPA in patient with atypical CNS presentation and could help to make a prompt diagnosis.

The aim of this paper is to establish a valid procedure for better understanding all the phenomena associated with the high-speed machining of Glass Fibre Reinforced Plastic (GFRP) composites. Both rectangular and circular specimens were machined at high speeds (up to 50 m/min) in order to understand what occurred for all values of fiber orientation angles during machining operations. An innovative testing methodology was proposed and studied to investigate the phenomenon of burr formation and thus understand how to avoid it during machining operations. To this end, the forces arising during the machining process and the roughness of the resulting surface, were carefully studied and correlated with the cutting angle. Additionally, the cutting surface and chip morphology formed during cutting tests were examined using a high-speed camera. Close correlations are found between the variations of the cutting forces' signals and the trends of the roughness and the morphology of the machined surface.

The increasing availability of longitudinal data (repeated numerical observations of same units at different times) requires the development of flexible techniques to automatically detect common errors in such data. Besides obvious and easily identifiable cases, such as missing or out-of-range data, large longitudinal dataset often present problems not easily traceable by the techniques used for generic datasets. In particular, elusive and baffling problems are i) inversion of one or more values from one unit to another; ii) anomalous jumps in the series of values, iii) errors in the timing of the values due to a recalculation operated by the data providers to compensate previous errors. This work proposes a statistical-mathematical approach based on a system of indicators that is able to capture the complexity of the described problems by working at the formal level, regardless of the specific meaning of the data. The proposed approach identifies suspect erroneous data and is applicable in a variety of contexts. We implement this approach in a relevant database of European Higher Education institutions (ETER) by analyzing Total academic staff, that is one of the most important variables, used in empirical analysis as proxy of size and also considered by policy makers at European level.

Innovative tissue engineering biomimetic hydrogels based on hydrophilic polymers have been investigated for their physical and mechanical properties. 5% to 25% by volume loading PHEMA-nanosilica glassy hybrid samples were equilibrated at 37°C in aqueous physiological isotonic and hypotonic saline solutions (0.15 and 0.05 M NaCl) simulating two limiting possible compositions of physiological extracellular fluids. The glassy and hydrated hybrid materials were characterized both for dynamo-mechanical properties and equilibrium absorptions in the two physiological-like aqueous solutions. Mechanical and the morphological modifications occurring in the samples have been described. The 5% volume nanosilica loading hybrid nanocomposite composition showed mechanical characteristics in the dry and hydrated states that were comparable to those of cortical bone and articular cartilage, respectively, and then chosen for further sorption kinetics characterization. Sorption and swelling kinetics were monitored up to equilibrium. Changes in water activities and osmotic pressures in the water-hybrid systems equilibrated at the two limiting solute molarities of the physiological solutions have been related to the observed anomalous sorption modes using the Flory-Huggins interaction parameter approach. The bulk modulus of the dry and glassy PHEMA-5% nanosilica hybrid at 37°C has been observed to be comparable with the values of the osmotic pressures generated from the sorption of isotonic and hypotonic solutions. The anomalous sorption modes and swelling rates are coherent with the difference between osmotic swelling pressures and hybrid glassy nano-composite bulk modulus: the lower the differences the higher the swelling rate and equilibrium solution uptakes. Bone tissue engineering benefits of use of tuneable biomimetic scaffold biomaterials that can be “designed” to act as biocompatible and biomechanically active hybrid interfaces are discussed.

Background:Caregiving for individuals with neurological disease involves providing physical, emotional, and social support, which can be a challenging and stressful experience. This study aims to compare the caregivers' burden, including the impact on mental and physical health, social support, and quality of life, in different neurodegenerative disorders. Methods:Fifty-five primary caregivers (F=41;mean age=53.07±12.29) of patients with Parkinson's Disease (PD=26), Multiple System Atrophy (MSA=16), and Amyotrophic Lateral Sclerosis (ALS=13), took part in the study. Standardized screening scales for the quality of life (EQ-5D/EQ-VAS and PQoL), levels of the caregiving burden (CBI and FSQ), and the assessment of the anxiety-depressive axis (HADS) were administered. Results: The mean CBI score was higher for caregivers of MSA patients (28.81±21.90) and ALS (25.15±16.23) than for caregivers of PD patients (16.08±10.34; p=0.036). Critical burden (cut-off>36) was present in the caregivers of MSA (31.3%), ALS (23.1%), and PD (19.2%) patients. Caregivers of patients with ALS had a worse perception of quality of life (EQ-5D total score) than caregivers of patients with MSA and PD (p

This article addresses the problem of formation control of a quadrotor and one (or more) marine vehicles operating at the surface of the water with the end goal of encircling the boundary of a chemical spill, enabling such vehicles to carry and release chemical dispersants used during ocean cleanup missions to break-up oil molecules. Firstly, the mathematical models of the Medusa class of marine robots and quadrotor aircrafts are introduced, followed by the design of single vehicle motion controllers that allow these vehicles to follow a parameterized path individually using Lyapunov based techniques. At a second stage, a distributed controller using event triggered communications is introduced, enabling the vehicles to perform cooperative path following missions according to a pre-defined geometric formation. In the next step, a real time path planning algorithm is developed that makes use of a camera sensor, installed on-board the quadrotor. This sensor enables the detection in the image of which pixels encode parts of a chemical spill boundary and use them to generate and update in real time a set of smooth B-spline based paths for all the vehicles to follow cooperatively. The performance of the complete system is evaluated by resorting to 3-D simulation software, making it possible to simulate visually a chemical spill. Results from real water trials are also provided for parts of the system, where two Medusa vehicles are required to perform a static lawn-mowing path following mission cooperatively at the surface of the water.

Imatinib 400 mg is the standard of care for medical treatment of advanced GISTs. In the majority of cases, however, GISTs eventually develop resistance to imatinib. The optimal second line treatment has not been established yet and imatinib dose escalation (800 mg) or sunitinib represent two feasible options. The objective of this retrospective, multi-institutional, study is to analyze the validity of several parameters as possible predictive factors of response to sunitinib after imatinib failure. We reviewed 128 metastatic GISTs treated with sunitinib between January 2007 to June 2017. Primary tumour site, metastatic site, c-KIT/PDGFR-α mutational status, PET-FDG status and type of disease progression to sunitinib were assessed as possible predictive factors of response. This study identifies the gastric site of primary tumor as a predictive factor to sunitinib efficacy in second line setting. The mutational status (GIST WT), the site of metastasis (peritoneum) and the FDG-PET status (negative), although not statistically significant, seem to be elements of increased activity for sunitinib treatment. These results provide the rationale to drive physician for sunitinib choice in second line setting for metastatic GISTs, to improve patients selection and to maximize the benefit from the treatment, on the basis of possible predictive factors of response.

Large volume bone defect regeneration is complex and demands time to complete. Several regeneration phases with unique characteristics including immune responses follow, overlap, and interdepend on each other and, if successful, lead to the regeneration of the organ bone's form and function. However, during traumatic, infectious, or neoplastic clinical cases, the intrinsic bone regeneration capacity may exceed, and surgical intervention is indicated. Scaffold-guided bone regeneration (SGBR) has recently shown efficacy in preclinical and clinical studies. To investigate different SGBR strategies over periods of up to 3 years we have established a well characterized large segmental tibial bone defect ovine model, for which we have developed and optimized immunohistochemistry (IHC) protocols. We present an overview of the immunohistochemical characterization of different experimental groups in which all ovine segmental defects were treated with a bone grafting technique combined with a three-dimensionally printed medical-grade polycaprolactone-tricalcium phosphate (mPCL-TCP) scaffold. The qualitative data set is based on osteoimmunological findings gained from IHC analyses of over >350 sheep surgeries over the past two decades. Our systematic and standardized IHC protocols enabled us to gain further insight into the complex and long-drawn-out bone regeneration processes, which ultimately proved to be a critical element for successful translational research.

Temporomandibular disorders (TMDs) refer to a group of conditions that affect the temporomandibular joint, causing pain and dysfunction in the jaw joint and related muscles. The diagnosis of TMDs typically involved clinical assessment through operator-based physical examination, self-reported questionnaire and imaging studies. To objectivize the measurement of TMD, this study aims at investigating on the feasibility to use machine-learning algorithms fed with data gathered from low-cost and portable instruments to discriminate the presence of TMD in adult subjects. Through this aim, the experimental protocol involved fifty participants, equally distributed between TMD and healthy subjects, acting as control group. The diagnosis of TMD has been performed by a skilled operator through the typical clinical scale. Participants underwent to a baropodometric analysis by using a pressure matrix and the evaluation of the cervical mobility through inertial sensors. Nine machine-learning algorithms belonging to support vector machine, k-nearest neighbours and decision tree were compared. The k-nearest neighbours based on cosine distance was found as the best performing, achieving performance of 0.94, 0.94 and 0.08 for the accuracy, F1-score and G-index, respectively. These findings open the possibility to use such methodology to support the diagnosis of TMDs in clinical environments.

A growing body of evidences is showing that dysbiotic gut microbiota may correlate with a wide range of disorders; hence, the clinical use of microbiota maps and fecal microbiota transplantation (FMT) can be exploited in the clinic of some infectious diseases. Through direct or indirect ecological and functional competition, FMT may stimulate decolonization of pathogens or opportunistic pathogens, modulating immune response and colonic inflammation, and restoring intestinal homeostasis, with reduction of host damage. Herein, we discuss how diagnostic parasitology may contribute to design clinical metagenomics pipelines and FMT programs, especially in pediatric subjects. The consequences of a more specialized diagnostics in the context of gut microbiota communities may improve the clinical parasitology and extend its applications to the prevention and treatment of several communicable and even noncommunicable disorders.

Predictive numerical models in the study of ground-borne vibrations generated by railway sys-tems have traditionally relied on the segmented approach of subsystems. In this approach, loads are individually applied, and the cumulative effect of rolling stock is obtained through superposi-tion. While this method serves to mitigate computational costs, it may not fully capture the com-plex interactions involved in ground-borne vibrations. Recent advancements in computational and software tools have enabled the development of more sophisticated vibrational pollution models. These advanced models encompass the entire dynamic system, from the rolling stock to the terrain, allowing for continuous simulations with a defined time step. Furthermore, the incorporation of computational contact tools between various ele-ments not only ensures temporal accuracy but also extends the analysis to the frequency domain. This paper explores the evolution of predictive numerical models in the context of ground-borne vibrations generated by trains on ballasted tracks. It highlights the shift from segmented models to continuous simulations, demonstrating the progressive advancement towards more comprehen-sive and accurate representations of railway-induced and generated vibrations in the track sur-roundings as an additional way of evaluate sustainability of infrastructures. In particular, this development of a numerical model from its inception aimed to expand upon ex-isting emission - prediction models by enriching the data with frequency-domain information. This approach has been driven by the aspiration to bridge the gap between numerical predictions and measured signals, striving for a higher level of accuracy in our obtained results. This model can predict the impact of a high-speed rail (HSR) vehicle passing on its own track. It possesses sufficient information in both the time and frequency domains to precisely characterize vibrations. This initiative marks a pivotal advancement, enabling us to more effectively capture the intricacies of ground-borne vibrations and their impact on the surrounding environment due to a deeper comprehension of the occurrences in the frequency domain, there's a heightened ca-pability to accurately characterize vibrations.

The paper addresses the problem of a statistically significant numerical evaluation of the biomechanics of respiration using the motion of the ribcage through the identification of the kinematics of the sixth rib. We report the results of an experimental campaign conducted using a RESPIRholter device prototype for efficient, comfortable, and numerical monitoring on two groups of volunteers, namely with healthy people and with chest operated patients. The results are reported in terms of statistical processing of the data extracted from the monitoring which are represented in plots of acquired motion characteristics with movement graphs in terms of angles and accelerations. This experimental campaign can be considered a first result for the construction of a database useful for a reference of diagnostics as reported by the discussed example case study.

The Musa textilis var. Abuab has high fiber quality (FQ) but has low resistance against abaca bunchy top virus (AbBTV); the Musa balbisiana var. Pacol, has low FQ but high resistance against AbBTV. Their backcrosses (BC2 and BC3) possess both desirable traits. Analysis using RNA-seq showed that the regulatory divergence of Abuab and Pacol is largely explained by cis differences with 27.4% and 22.3% if we are to assess it using BC2 and BC3, respectively. Cis differences between the two genotypes are significantly reduced from BC2 to BC3 due to changes in genomic constitution. Trans, on the other hand, is robust to changes in allelic composition. All these are attributed to the loss of heterozygosity in the BC3 relative to BC2. Further analysis showed that both backcrosses exhibited genome-wide preferential expression of Pacol- over Abuab-specific alleles, despite the wider genetic presence of the latter in the hybrids. The ratio of the two genotype-specific expressed transcripts and the ratio of their corresponding genetic make-up are significantly disproportionate, a phenomenon which we refer here as “genome–transcriptome incongruence”. We also observed preferential expression switching in which several genes prefer Abuab- (or Pacol-) specific allele in the BC2 but switched to Pacol- (or Abuab-) specific allele in the BC3 genome.

This study aims to develop a hybrid approach based on backpropagation Artificial Neural Network (ANN) and spatial analysis techniques to predict particulate matter of size 2.5 µm (PM2.5) from vehicle exhaust emissions in the State of California using Aerosol Optical Depth (AOD) and several climatic indicators (relative humidity, temperature, precipitation, and wind speed). The PM2.5 data were generated using Motor Vehicle Emission Simulator (MOVES), the measured climatic variables and AOD were obtained from the California Irrigation Management Information System (CIMIS), and NASA’s Moderate Resolution Spectroradiometer (MODIS). The data were resampled to a seasonal format and downscaled over grids of 10 by 10 to 150 by 150, and precipitation was determined to be the most important independent variable. Coefficient of determination ( ), Mean Absolute Percentage Error (MAPE), and Root Mean Square Error (RMSE) were used to assess the quality of the ANN prediction model. The model peaked at winter seasons with = 0.984, RMSE = 0.027, and MAPE = 25.311, whereas it had the lowest performance in summer with = 0.920, RMSE = 0.057, and MAPE = 65.214. These results indicate that the ANN model can accurately predict the PM2.5 concentration and can be used to forecast future trends.

Background: Residents of a large area of North-Eastern Italy were exposed for decades to high concentrations of perfluoroalkyl and polyfluoroalkyl substances (PFAS) via drinking water. Despite the large amount of evidence in adults of a positive association between serum PFAS and metabolic outcomes, studies focusing on children and adolescents are limited. We evaluated the associations between serum PFAS concentrations and lipid profile, blood pressure and body mass index (BMI) in highly exposed adolescents and children. Methods: A cross-sectional analysis was conducted in 6669 adolescents (14-19 years) and 2693 children (8-11 years) enrolled in the health surveillance program of the Veneto Region. Non-fasting blood samples were obtained and analyzed for perfluorooctanoic acid (PFOA) perfluorooctane sulfonate (PFOS), perfluorohexanesulfonic acid (PFHxS), perfluorononanoic acid (PFNA), total cholesterol (TC) high-density lipoprotein cholesterol (HDL-C) and triglycerides. Low-density lipoprotein cholesterol (LDL-C) was calculated. Systolic and diastolic blood pressure (BP) were measured and BMI z-score accounting for age and sex was estimated. The associations between ln-transformed PFAS (and categorized into quartiles) and continuous outcomes were assessed using generalized additive models. Analyses were stratified by gender and adjusted for potential confounders. Results: Among adolescents, significant associations were detected between all investigated PFAS and TC, LDL-C, and to a fewer extent HDL-C. Among children, PFOS and PFNA had significant associations with TC, LDL-C and HDL-C, while PFOA and PFHxS had significant associations with HDL-C only. Increased serum concentrations of PFAS, particularly PFOS, were associated with decreased BMI z-score. No statistically significant associations were observed between PFAS concentrations and BP. Conclusions: Our study supports a consistent association between PFAS concentration and serum lipids, stronger for PFOS and PFNA and with a greater magnitude among children compared to adolescents, and a negative association of PFAS with BMI.

Idiopathic acute pancreatitis (IAP) presents a diagnostic challenge and refers to cases where the cause of acute pancreatitis remains uncertain despite a comprehensive diagnostic evalua-tion. Endoscopic ultrasound (EUS) has emerged as a valuable tool in the diagnostic workup of IAP. This review explores the pivotal role of EUS in detecting the actual cause of IAP, as-sessing its accuracy, timing, safety, and future technological improvement. Following PRISMA guidelines, 60 pertinent studies were selected and analysed. EUS emerges as a cru-cial diagnostic tool, particularly when conventional imaging fails. It can offer intricate visu-alization of the pancreas, biliary system, and adjacent structures. High accuracy of EUS is evident in detecting the actual causes of IAP such as microlithiasis, small bile duct stones, pancreas divisum, and small pancreatic tumors. Optimal timing for EUS is post-resolution of the acute phase of the disease. EUS, when conducted by experienced endoscopists, it boasts minimal safety concerns, and is crucial to prevent complications. EUS-guided interventions, including fine-needle aspiration, collection drainage, and biopsies, aid in cytological analy-sis. With high diagnostic accuracy, safety, and therapeutic potential, EUS is able to improve patient outcomes when managing IAP. Further refinement of EUS techniques and cost-effectiveness assessment of EUS-guided approaches need to be explored in multicenter prospective studies. This review underscores EUS as a transformative tool in unraveling IAP's enigma and advancing diagnostic and therapeutic strategies.

We developed a novel approach in the field of spatiotemporal modelling, based on the spatialisation of time: the Timescape algorithm. It is especially aimed at sparsely distributed datasets in ecological research, whose spatial and temporal variability is strongly entangled. The algorithm is based on the definition of a spatiotemporal distance that incorporates a causality constraint and that is capable of accommodating the seasonal behaviour of the modelled variable as well. The actual modelling is conducted exploiting any established spatial interpolation technique, substituting the ordinary spatial distance with our Timescape distance, thus sorting, from the same input set of observations, those causally related to each estimated value at a given site and time. The notion of causality is expressed topologically and it has to be tuned for each particular case. The Timescape algorithm originates from the field of stable isotopes spatial modelling (isoscapes), but in principle it can be used to model any real scalar random field distribution.

Asphaltenes constitute a heavy fraction of fossil fuels and their characterization is still a very difficult and challenging issue due to their complex and variable composition. Asphaltene components are highly condensed aromatic molecules having some heteroatom and aliphatic functionalities. Their molecular weights distribution span a wide range, from hundreds to millions of units, in dependence on the diagnostic used, leading to speculation about possible occurrence of self-aggregation. In the present work, mass spectrometry, with properly developed mathematical methods, size ex-clusion chromatography and X-ray diffraction analysis have been applied to asphaltenes for giving some further insight on their MW distribution and characteristics. The results here reported give further quantitative support to the experimental data interpretation already reported in previous works.

Irrigated agriculture determines large blue water withdrawals, and it is considered a key intervention area to reach sustainable development objectives. Precision agriculture technologies have the potential to mitigate water resource depletion that often characterizes conventional agricultural approaches. This study investigates the factors influencing farmers' intentions to adopt variable rate irrigation (VRI) technology. The Technology Acceptance Model 3 (TAM-3) was employed as a theoretical framework to design a survey to identify the factors influencing farmers' decision-making process when adopting VRI. Data were gathered through quantitative face-to-face interviews with a sample of 138 fruit and grapevine producers from the Northeast of Italy (Veneto, Emilia-Romagna, Trentino-Alto Adige, Friuli-Venezia Giulia). Data were analyzed using partial least squares path modelling (PLS-PM). The results highlight that personal attitudes, such as perceived usefulness and subjective norm, positively influence the intention to adopt VRI. Also, the perceived ease of use positively affects intention, but it is moderated by subject experience.

Ensuring access to water, sanitation, and hygiene (WASH) facilities, coupled with behavior change education in schools, is fundamental for fostering a conducive learning environment and promoting principles of inclusion, dignity, and equality. This study focuses on 12 primary schools in Anápolis, Brazil, encompassing 4,394 students and 248 teachers. WASH assessments were conducted through a questionnaire, observation of water and sanitation facilities and structures, and microbiological analysis. Over the period 2018 to 2020, the proportion of schools with safely managed drinking water surged from 42% to 92%. However, sanitation conditions in the schools were categorized as a basic level, with hygiene services rated as limited in 92% of the schools due to the absence of soap. While this study reveals that Anápolis schools generally align with WASH guidelines for basic/advanced drinking water services, there is a crucial need for enhancements in both hardware and software facilities to address sanitation and hygiene challenges.

In this work, the analytical Lagrange-Kirchhoff model for the deformation for a taiko plate silicon is proposed. Under the conditions of validity of the linear theory of thin plates, the model is in agreement with the experimental data.

Supramolecular structures are of great interest due to their applicability in various scientific and industrial fields. These fields of scientific action include promising applications i biomedical areas, in sensing, and in conductive and electrical phases. The sensible definition of supramolecular molecules is being set by investigators, who, because of the different sensitivities of their methods and observational timescales, may have different views as to what constitute these supramolecular structures. Besides, diverse polymers can be found to offer unique avenues for multifunctional systems with properties in medicine industrial applications. Aspects of this review provide different conceptual strategies to address molecular design, properties, and potential applications of self-assembly materials and the use of metal coordination as a feasible and useful strategy for constructing complex supramolecular structures. In this order of appreciations and ideas order, it is that this review report involves classic topics such as hydrogels that range from their relationship with drug delivery systems, to metallo-supramolecular materials, through applications in ophthalmic systems, in applications that require adhesiveness and electrically conductive hydrogels. This review also addresses systems that are largely based on hydrogel chemistry and the enormous opportunities to design very specific structures for applications that demand enormous specificity.

Tomato quality is intricately regulated by a combination of factors, including the presence of bioactive compounds referred to as secondary metabolites and various organoleptic characteristics. These attributes are notably influenced and harmonized by the specific growing conditions, with a particular emphasis on the type of fertilization employed. Traditionally, chemical fertilizers have been favoured in crop cultivation due to their cost-effectiveness and ability to accelerate crop growth. However, in pursuit of sustainable and intelligent agricultural practices, there is a growing need for alternative fertilizers. In this context, the present study aimed to assess the impact of fertilizers derived from waste materials, specifically sulphur bentonite and orange residue (referred to as SB), on tomato quality. This assessment extended to examining qualitative and quantitative alterations in aroma-related volatile compounds and the antioxidant systems of tomatoes, in comparison to the conventional use of fertilizers such as horse manure and NPK (nitrogen, phosphorus, and potassium). The results obtained revealed distinct effects of different fertilizers on tomato quality. Notably, parameters such as TPRO (total protein), TCARB (total carbohydrate), LIC (lycopene content), TCAR (total carotenoid content), total phenols, total flavonoids, and aroma profiling exhibited significantly superior values in the group treated with SB fertilizer. These findings strongly suggest that the novel fertilizer functioned as a bio-stimulant, enhancing the nutraceutical and sensory attributes of tomatoes, with a pronounced impact on the synthesis of secondary metabolites and the aroma profile of the fruits.

Soot is characterized by a multiscale structural organization and Transmission Electron Microscope (TEM) is the only diagnostic tool giving access to it. However, being a diffraction-based technique, TEM images only aromatic systems and thus, it is particularly useful to combine it with electron energy-loss spectroscopy (EELS), able to provide quantitative information about the relative abundance of sp3 and sp2 hybridized carbon. In this paper a method for the EELS spectrum analysis of carbonaceous materials recently developed for electron-irradiated graphite and glassy carbon composition analysis has been applied for the first time on soot samples, in order to test its performance in soot nanostructure study in combination with TEM and High Resolution TEM (HRTEM). Soot samples here analysed were collected in the soot inception region of premixed flames of different hydrocarbon fuels. EELS, in agreement with TEM and HRTEM, showed a quite disordered and heterogeneous structure for young soot, without any significant distinction between soot formed from methane and ethylene fuels.

The SARS-CoV-2 polybasic furin cleavage site is still a missing link. Remarkably, the two arginine residues of this protease recognition site are encoded by the CGG codon, which is rare in Betacoronavirus. However, the arginine pair is common at viral furin cleavage sites, but are not CGG-CGG encoded. The question is: Is this genetic footprint unique to the SARS-CoV-2? To address the issue, using Perl scripts, here I dissect in detail the NCBI Virus database in order to report the arginine dimers of the Betacoronavirus proteins. The main result reveals that a group of Middle East respiratory syndrome-related coronavirus (MERS-CoV) (isolates: camel/Nigeria/NVx/2016, host: Camelus dromedarius) also have the CGG-CGG arginine pair in the spike protein polybasic furin cleavage region. In addition, CGG-CGG encoded arginine pairs were found in the orf1ab polyprotein from HKU9 and HKU14 Betacoronavirus, as well as, in the nucleocapsid phosphoprotein from few SARS-CoV-2 isolates. To quantify the probability of finding the arginine CGG-CGG codon pair in Betacoronavirus, the likelihood ratio (LR) and a Markov model were defined. In conclusion, it is highly unlikely to find this genetic marker in betacoronaviruses wildlife, but they are there. Collectively, results shed light on recombination as origin of the virus CGG-CGG arginine pair in the S1/S2 cleavage site.

The aim of this study was to measure the effects on 3D active cervical Range of Motion (ACROM) and perceived pain of a n elastic taping (ET) application in the cervical area. Thirty participants (n: 22M and 8F, age 35.4±4.4 years; body height 173.1±8.4 cm; body mass 73.5±12.8 kg) for the study group (SG) and twenty subjects (n: 11M and 9F, age 32.6±3.9 years; body height 174.9±10.9 cm; body mass 71.2±12.9 kg) for the control group (CG) were recruited. All subjects were symptomatic for neck and cervical pain in baseline condition. Each group performed on ACROM test and the perceived pain on neck basing as Numerical Rating Scale (NRS 0-10, a.u.): at the baseline (T0); after 20' from ET application (T1); after three days of wearing the ET application (T2). Between T0 and T1 an ET was applied on the cervical area of the SG participants. Statistical analysis did not show any significant change in CG in any measurement session for ACROM and neck pain parameters. Conversely, the SG showed significant improvements for ACROM rotation left (T0 64.8 ± 7.7° - T2 76.0 ± 11.1° p < 0.000) and right (T0 66.0 ± 11.9° - T2 74.2 ± 9.6° p < 0.000); lateral inclination left (T0 37.5 ± 6.9° - T2 40.6 ± 10.8° p < 0.000) and right (T0 36.5 ± 7.9° - T2 40.9 ± 5.2° p < 0.000); flexion posterior (T0 47.0 ± 12.9° - T2 55.1 ± 12.3° p < 0.001) and anterior (T0 55.0 ± 3.6° - T2 62.9 ± 12.0° p < 0.006). A significant decrease was measure also in SG for pain NRS between T0 and T2 (T0 7.5 ± 1.0° - T1 5.5 ± 1.4 - T2 1.4 ± 1.5° p < 0.000). In conclusion, the results of this study underline the usefulness of a bilateral and symmetrical ET cervical application in terms to enhance multiplanar ACROM and to reduce subjective self-perceived cervical pain when it is needed. These findings can be applied for managing musculoskeletal health of different kind of individuals.

Scaffolds for tissue engineering are expected to respond to a challenging combination of physical and mechanical requirements, guiding the research towards the development of novel hybrid materials. This study introduces innovative three-dimensional bioresorbable scaffolds, in which a stiff poly(lactic acid) lattice structure is meant to ensure temporary mechanical support, while a bioactive gelatin-chitosan hydrogel is incorporated to provide a better environment for cell adhesion and proliferation. The scaffolds present a core-shell structure, in which the lattice core is realized by additive manufacturing, while the shell is nested throughout the core by grafting and crosslinking a hydrogel forming solution. After subsequent freeze-drying, the hydrogel network forms a highly interconnected porous structure that completely envelops the poly(lactic acid) core. Thanks to this strategy, it is easy to tailor the scaffold properties for a specific target application, by properly designing the lattice geometry and the core/shell ratio, which are found to significantly affect the scaffold mechanical performance and its bioresorption. Compression stiffness and strength provided by poly(lactic acid) lattices are overall within the range of values displayed by human bone tissue and remain stable after prolonged immersion in water at body temperature for several weeks. On the other hand, the hydrogel undergoes gradual and homogeneous degradation over time, but the core-shell integrity and structural stability are nevertheless maintained during at least 7-week hydrolytic degradation tests. In vitro experiments with human mesenchymal stromal cells reveal that the core-shell scaffolds are biocompatible and their physical-mechanical properties and architecture are suitable to support cell growth and osteogenic differentiation, as demonstrated by hydroxyapatite formation. These results suggest that the bioresorbable core-shell scaffolds can be considered, and further studied, in view of clinically relevant endpoints in bone regenerative medicine.

Modern drugs have changed epilepsy, which affects people of all ages. But for young people with epilepsy, the framework of drug development has stalled. In the wake of the thalidomide catastrophe, the misconception emerged that for people <18y antiseizure medications (ASMs) need separate proof of efficacy and safety (E&S), overall called “pediatric drug development.” This has been corrected to some extent. Authorities accept that ASMs are effective in <18y as well, but they still require "extrapolation of efficacy," as if minors were another species. In our view, the real problem is less that relevant parts of pediatric clinical epilepsy research over the past decades were useless, but that this has hampered research on meaningful challenges. We do not need to show that ASMs work also before the 18th birthday. But we need to learn how to best use ASMs to prevent brain damage in young patients and optimize ASMs use considering a broader range of aspects

The incremental sheet forming represents a relatively recent technology that guarantees high customization, thanks to the layered manufacturing principle typical of rapid prototyping, and cost-effectiveness, because it does not require dedicated equipment. Research has initially shown that this process is effective in metal materials capable of withstanding plastic deformation but, in recent years, the interest in this technique has been increasing for the manufacture of complex polymer sheet components as an alternative to the conventional technologies, based on heating-shaping-cooling manufacturing routes. Conversely, incremental formed polymer sheets can suffer from some peculiar defects, for example twisting. To reduce the risk of this phenomenon and the occurrence of failures, a viable way is to choose toolpath strategies that make the tool/sheet contact conditions less severe, and this represents the main goal of the present research. Polycarbonate sheets were worked by incremental forming; in detail, cone frusta with a fixed wall angle were manufactured with a reference and a stair toolpath strategy, and both the forming forces and the twist angle were monitored. The analysis of the results highlighted that a stair toolpath involving an alternation of diagonal up and vertical down steps represents a useful strategy to mitigate the forming forces and, with them, the occurrence of the twisting phenomenon in incremental formed thermoplastic sheets.

Boron Neutron Capture Therapy (BNCT) is a promising binary disease-targeted therapy, as neutrons preferentially kill cells labeled with boron (¹⁰B), which makes it a precision medicine treatment modality that provides a therapeutic effect exclusively on patient-specific tumor spread. Contrary to what is usual in radiotherapy, BNCT proposes cell-tailored treatment planning rather than to the tumor mass. The success of BNCT depends mainly on the sufficient spatial biodistribution of ¹⁰B located around or within neoplastic cells to produce a high-dose gradient between the tumor and healthy tissue. However, it is not yet possible to precisely determine the concentration of ¹⁰B in a specific tissue in real-time using noninvasive methods. Critical issues remain to be resolved if BNCT is to become a valuable, minimally invasive, and efficient treatment. Moreover, functional imaging technologies such as PET can be applied to determine biological information that can be used for the combined-modality radiotherapy protocol for each specific patient. Anyway, not only imaging methods but also proteomics and gene expression methods will facilitate BNCT becoming a modality of personalized medicine. This work provides an overview of the fundamental principles, recent advances, and future directions of BNCT as cell-targeted cancer therapy for personalized radiation treatment.

Eysenhardtia platycarpa (Fabaceae) is a medicinal plant used in México and it lacks biotechnological studies for its use. The aim of this work was to establish a cell suspension cultures (CSC) of E. platycarpa, determine the phytochemical profile, and evaluate its antifungal activity. Friable callus and CSC were established with 2 mg/L 1-naphthaleneacetic acid plus 0.1 mg/L kinetin. The highest total phenolics of CSC was 15.6 mg GAE/g dry weight and the total flavonoids content ranged from 56.2 to 104.1 µg QE/g dry weight. CG‒MS analysis showed that the dichloromethane extracts of CSC, sapwood and heartwood have a high amount of hexadecanoic acid (22.3 ‒ 35.3 %) and steroids (13.5 ‒ 14.7%). Heartwood and sapwood defatted hexane extracts have the highest amount of stigmasterol (≈ 23.4%) and β-sitosterol (≈ 43%), and leaf extracts presented β-amyrin (16.3%). Methanolic leaves extracts showed mostly sugars and some polyols, mainly D-pinitol (74.3%). Dichloromethane and fatty hexane extracts of CSC exhibited the percentages inhibition higher for Sclerotium cepivorum with 71.5 and 62.0%, respectively. The maximum inhibition for Rhizoctonia solani was with fatty hexane extracts of the sapwood (51.4%). Our study suggest that CSC extracts could be used as a possible complementary alternative to synthetic fungicides.

We describe an interesting case report about a patient with hemophilia A with severe chronic elbow arthropathy who underwent multiple surgical because of his condition. We collected all the clinical and imaging findings, and we compared the decision-making flow chart and the surgery performed with the most recent indications, treatments and complications reported in the literature. The aim of this case report is to show how usually the hemophilic patient even if young usually comes to our attention from the beginning with complex and advance musculoskeletal disease. Elbow hemophilic arthropathy is a complex disease and the management in these patients could be more difficult than others because of the higher risk of complications rate after all surgical procedures, for this reason it’s very important to treat these patients in hub centers with expertise in well-coordinated multidisciplinary teams. The path from diagnosis to surgical treatment of hemophilic elbow arthropathy can be a risky one, as it happened in this case.

Soil texture is key information in agriculture for improving soil knowledge and crop performance, so the accurate mapping of this crucial feature is imperative for rationally planning cultivations and for targeting interventions. We studied the relationship between radioelements and soil texture in the Mezzano Lowland (Italy), a 189 km² agricultural plain investigated through a dedicated airborne gamma-ray spectroscopy survey. The K and Th abundances were used to retrieve the clay and sand content by means of a multi-approach method. Linear (simple and multiple) and non-linear (machine learning algorithms with deep neural networks) predictive models were trained and tested adopting a 1:50,000 scale soil texture map. The comparison of these approaches highlighted that the non-linear model introduces significant improvements in the prediction of soil texture fractions. The predicted maps of the clay and of the sand content were compared with the regional soil maps. Although the macro-structures were equally present, the airborne gamma-ray data permits us shedding light on finer features. Map areas with higher clay content were coincident with paleo-channels crossing the Mezzano Lowland in Etruscan and Roman periods, confirmed by the hydrographic setting of historical maps and by the geo-morphological features of the study area.

All living organisms require some metal ions for their energy production as well as metabolic and biosynthetic processes. Within cells, metal ions are involved in the formation of adducts interact with metabolites and macromolecules (proteins and nucleic acids). The proteins that require binding to one or more metal ions to be able to carry out their physiological function are called metalloproteins. About one third of all protein structures in the Protein Data Bank involve metalloproteins. Over the past few years there has been a tremendous progress in the number of computational tools and techniques making use of 3D structural information to support the investigation of metalloproteins. This trend has been boosted also by the successful applications of neural networks and deep learning approaches in molecular and structural biology at large. In this review, we discuss recent advances in the development and availability of resources dealing with metalloproteins from a structure-based perspective. We start by addressing tools for the prediction of metal-binding sites (MBSs) using structural information on apo-proteins. Then, we provide an overview of methods for and lessons learned from the structural comparison of MBSs in a fold-independent manner. We then move to describing databases of metalloprotein/MBS structures. Finally, we summarize recent DL applications enhancing the functional interpretation of metalloprotein structures.

This work analyzes the visibility and scientific impact of publications related to agricultural value chains. The incidence of bibliometric indicators allows for the interpretation of bibliographic information generated worldwide. Objective: The objective of this research is to analyze the published literature and bibliometric indicators on agricultural value chains. The Web of Science database was used to extract value chains data. The study analyzed articles published between 2010 and 2020. The keywords used are "agricultural value chains'' and articles from journals or studies related to the subject were selected for bibliometric analysis and methodological review. In the search for the keyword, a total of 4208 results were extracted, of which 1,669 records were considered for analysis. The bibliometric analysis of the data reveals that Wageningen University (55) has the highest number of publications, followed by Chinese Acad Sci (26). The author Klerkx L (9) has the highest number of records, followed by Hellin J (7). With respect to the countries with the greatest contributions on the subject are: the People's Republic of China, Germany, Italy, France and the United States. The study contributes to the analysis of bibliometrics and provides a methodological review of published journal articles on agricultural value chains. This bibliographic study presents the history of research development in agricultural value chains.

Amitriptyline is a tricyclic antidepressant commonly used for depressive disorders and pre-scribed off-label for several neurological conditions like neuropathic pain, migraine and anxiety. Amitriptyline potentiates the monoaminergic transmission by blocking the reuptake of norepi-nephrine and serotonin. However, antidepressants also act on additional targets that contribute to either therapeutic or adverse effects and may suggest new indications for their repurposing. Furthermore, since depression is often a co-morbidity in patients with chronic conditions (i.e. cancer, neurodegenerative diseases) the use of antidepressants interfering with pathways in-volved in cell homeostasis may affect the progression and outcome of these pathologies. Here we investigate the effects of amitriptyline on proliferation and autophagy in human SH-SY5Y neuroblastoma cells. Dose and time-dependent upregulation of the autophagy markers LC3II and autophagy receptor p62, with accumulation of LAMP1 positive compartments, were observed in SH-SY5Y cells exposed to amitriptyline. Alteration of autophagy was accompanied by reduced cell viability and decreased clonogenic capacity, without a significant induction of apoptosis. Decrease viability and clonogenic activity were still observed in autophagy deficient Atg5 -/- MEF and following pre-treatment of SH-SY5Y culture with the autophagy inhibitor chloroquine suggesting that the amitriptyline’s effects on cell proliferation were not caused by the modulation of autophagy. Our findings demonstrate that amitriptyline acts on pathways that are crucial for cell and tissue homeostasis and pose the basis for further studies on the potential application of these effects and the consequences during long-term antidepressant treatment.

The teaching of the lunge technique in fencing is critical in the developmental age. The relations of anthropometrics with kinematics of lunge was studied only in adult fencers, and no study exist in young considering the different level of experience. Our aims were to assess, in young fencers, which factors, between the anthropometric and the kinematics, were mostly connected with lunge performance (speed and excursion) in different genders and expertise levels. Fifteen young fencers participated in this study. Lunge kinematics, anthropometric characteristics and force expressed in vertical jump tests were collected. Maximal lunge velocity resulted mainly correlated with the posterior knee’s extension ((r=0.56, p=0.031). The lunge distance and mean hip velocity were mostly correlated with fencers’ height (r=0.85, p=0.000 and r=0.76, p=0.001) and FFM (r=0.8, p=0.000 and r=0.73, p=0.002). Experts and non-experts show significant differences in fat free mass, area of upper arm, and of thighs (Effect Size = 1,27 – 1,33, p= 0,021-0,035). From our results it emerges that, in this age range, the analysed aspects of lunge performance are mainly correlated with participant’s anthropometry. Moreover, it is already possible in this age span, to find technical differences linked to the experience.

Background: Limited research has explored sex-specific differences in death predictors of HF pa-tients with ischemic (iCMP) and nonischemic (niCMP) cardiomyopathy. This study assessed sex differences in niCMP and iCMP prognosis. Methods: We studied 7,487 patients with HF between February 2017 and September 2020. Clini-cal features and echocardiographic findings were collected. We used Kaplan-Meier, Cox propor-tional hazards models, and score chi-square of Cox regression to determine death predictors in women and men. Results: mean age was 64.3±14.2 years, with 4,417 (59%) males. Women with iCMP and niCMP exhibited significantly higher mean age, higher mean left ventricular ejection fraction, and smaller left ventricular diastolic diameter than men. Over 2.26 years of follow-up, 325 (14.7%) women and 420 (15.7%) men, and 211 women (24.5%) and 519 men (29.8%) died in niCMP (p=NS) and iCMP (p=0.004), respectively. Cumulative incidence of death was higher in men with iCMP (log-rank p<0.0001) but similar in niCMP. Cox regression showed chronic kidney disease, dia-betes, stroke, atrial fibrillation, age, and myocardial infarction, as main predictors of death for iCMP in women and men. Conclusion: Women exhibited a better prognosis than men in iCMP, but similar for niCMP. Nevertheless, sex was not an independent predictor of death for both CMP.

As of today, 20 disease modifying drugs (DMD) have been approved for the treatment of relapsing multiple sclerosis (MS) and, based on their efficacy, they can be grouped into moderate-efficacy DMDs and high-efficacy DMDs. The choice of the drug mostly relies on the judgement and experience of neurologists and the evaluation of therapeutic response can only be obtained by monitoring clinical and magnetic resonance imaging (MRI) status during follow up. In an era where therapies are focused on personalization, the aim of this study is to develop a modeling infrastructure to predict the evolution of relapsing MS and the response to treatments. We built a computational modeling infrastructure named UISS (Universal Immune System Simulator) able to simulate the main features and dynamics of the immune system activities. We extended UISS to simulate all the underlying MS pathogenesis and its interaction with the host immune system. This simulator is a multi-scale, multi-organ, agent based simulator with an attached module capable of simulating the dynamics of specific biological pathways at the molecular level. We simulated six MS patients with different relapsing-remitting courses. These patients were characterized on the basis of their age, sex, presence of oligoclonal bands, therapy and MRI lesion load at onset. The simulator framework is made freely available and can be used following the links provided in the availability section. Even though the model can be further personalized employing immunological parameters and genetic information, based on the available data we generated a few simulation scenarios for each patient, including those who matched the real clinical and MRI history. Moreover, for two patients, the simulator anticipated the timing of subsequent relapses, which really occurred, suggesting that UISS may have the potential to assist MS specialists in predicting the course of the disease and the response to treatment.

This research investigates the effects of torsional moments on the mechanical behavior of thin-walled open-ended vertical pile foundations subjected to lateral wind loads. The warping and torsion effect generated over the piles due to the resultant lateral load impact outside the shear center is analyzed in-field tests. Complementarily, a two-dimensional finite element model based on the simple bending stress-strain state as well as a three-dimensional finite element model considering torsional effects were implemented and their results analyzed. Finally, a comparative analysis between the in-field lateral loading tests and the finite element model approaches was established and correlations between the errors and the parameters of influence were highlighted. From the results, it has been ascertained that the slender thin-walled open-ended pile foundations are particularly sensitive to small load deviations from their center of gravity, this leads to the fact that the slenderer and the more eccentricity of the load, the more it affects the torsion and warping of the pile. Calculation methodologies usually consider a simple in-plane bending behavior which conducts to errors between 44 and 58% of the experimental results.

Outdoor exercise is beneficial for psychophysical well-being. Limited studies have compared outdoor and virtual reality (VR) indoor physical activities, especially in coastal settings. Therefore, this study aimed to assess the impact of outdoor coastal walking and indoor walking in a VR simulation with a similar environment on physiological and psychological variables in healthy adults. Twenty-six subjects (14M and 12F; age 25.2 ± 2.5 years) voluntarily participated in this crossover randomized controlled and counterbalanced study and were allocated under three conditions: VR indoor walking (INVR), outdoor walking (OUT) and standard indoor walking (IN). IN and INVR conditions were performed on a treadmill (speed 4.5 Km/h) and the OUT was per-formed on a seaside pedestrian road. The same outdoor environment was displayed in the visor during the INVR. Heart rate (HRmean/max), Physical Activity Enjoyment (PACES-It) and State of Mindfulness for Physical Activity (SMS-PA) were assessed at the end of each condition. The OUT condition showed significantly greater PACES-It scores and HRmean than IN and INVR (p<0.001) and greater SMS-PA scores and HRmax than IN (p<0.01 and p<0.05, respectively). No significant dif-ferences were found between OUT and INVR regarding HRmax and SMS-PA scores (p>0.05). Findings suggest that physical activity in an immersive technology may lead to physiological loads comparable to the outdoor environment. OUT is more enjoyable than IN and INVR but exhibits a mindfulness response comparable to INVR. Therefore, INVR could be an alternative to OUT for those who cannot engage in outdoor activities for various reasons.

Neuroscience has overwhelmingly and understandably focused on the synaptic modality of signal transmission. There is evidence, however, that from an evolutionary perspective, non-synaptic transmission (NST) preceded synaptic signaling. Moreover, in modern nervous systems, NST coexists and extensively interacts with synaptic transmission modifying neuronal dynamics. In fact, NST remains widespread in complex animals, especially within the interoceptive system where the dearth of insulating barriers such as myelin sheaths and the blood-brain barrier enhances the communication between neural and non-neural tissues mediated by NST. We suggest that this physiological arrangement makes a fundamental contribution to interoception¾the process of sensing visceral states¾which is an essential underpinning of the capacity to feel and the foundation of affective processing.

The effects of morphine (MOR) and dexmedetomidine (DEX) on the MAC of isoflurane were measured in rats chronically treated with the synthetic cannabinoid WIN 55,212-2 (WIN55). Methods: The MAC of isoflurane was determined in 32 male rats from expiratory samples at the time of tail clamping. The effects of morphine (MAC(ISO+MOR)) and dexmedetomidine (MAC(ISO+DEX)) on the MAC of isoflurane in untreated rats and rats treated for 21 days with WIN 55,212-2 (MAC(ISO+WIN55+MOR)) and (MAC(ISO+WIN55+DEX)) were measured. Prior to the administration of morphine and dexmedetomidine, the MAC of the isoflurane was measured in both untreated rats (MAC(ISO)) and those treated with WIN 55,212-2 (MAC(ISO+WIN55)). Results: The minimum alveolar concentration was measured as 1.32 ± 0.06 in the MAC(ISO) group and 1.69 ± 0.09 in the MAC(ISO+WIN55) group. The MAC of the MAC(ISO+MOR) group was 0.97 ± 0.02 (26% less than the control group, MAC(ISO)). MAC was measured as 1.55 ± 0.08 in the MAC(ISO+WIN55+MOR) group (8% less than the MAC(ISO+WIN55) group), 0.68 ± 0.10 in the MAC(ISO+DEX) group (48% less than the control group, MAC(ISO)), and 0.67 ± 0.08 in the MAC(ISO+WIN55+DEX) group (60% less than the MAC(ISO+WIN55) group). Conclusions: The administration of WIN 55,212-2 for 21 days increases the MAC of isoflurane in rats. The sparing effect on isoflurane of morphine decreases in rats chronically treated with the synthetic cannabinoid, WIN 55,212-2. Dexmedetomidine increases its sparing effect on the minimum alveolar concentration of isoflurane in rats chronically treated with WIN 55,212-2.

This study investigated whether export performance is correlated with innovation. We explicitly considered five types of innovation: a) process innovation; b) product innovation; c) process and product innovation; d) product innovation new to the firm; and e) product innovation new to the market. We en-larged the findings of R&D-export and R&D-investment relations using a vast sample of cross-European firms. We considered innovation as endogenous and determined by R&D through a process characterized by the role of the regional technological environment. Our analysis enabled us to propose an integrated model incorporating R&D, innovation and export, in a framework of simultaneous equations which consider their mutual correlations. To the best of our knowledge, this work is the first in recent years to empirically compute the relation between R&D and tangible investment at the micro level. Econometric results showed that product and process innovation are positively linked to the export intensity of European manufacturing firms. The results also showed complementarity effects between the two kinds of innovation. The av-erage effect on export intensity from carrying out process innovation is larger than that found for product innovation, except in cases where the product is new to the market. When both types of innovation have been carried out, a larger effect results than that found for product or process innovation alone. Furthermore, the average marginal effect on export intensity from innovations of any kind among those studied here is highly positive and significant.

Aims: To date, precision medicine plays a pivotal role in the clinical administration of solid tumor patients. In this scenario, a rapidly increasing number of predictive biomarkers have been approved in diagnostic practice or are currently investigated in clinical trials. A pitfall in the molecular tests is the diagnostic routine sample available to analyze predictive biomarkers; scant tissue sample often represents the only diagnostical source of nucleic acids to assess molecular analysis. At the sight of these critical issues, Next Generation Sequencing (NGS) platforms emerged as referral testing strategy for molecular analysis of predictive biomarkers in routine practice but high-skilled personnel, extensive working-time drastically impact on the widespread diffusion of this technology in diagnostic setting. Here, we technically validate a fully integrated NGS platform on diagnostic routine tissue samples previously tested with NGS based diagnostic workflow by a referral institution. Methods: A retrospective series of n=64 samples (n=32 DNA, n=32 RNA samples), previously tested using a customized NGS assay (SiRe™ and SiRe fusion) were retrieved from internal archive of University of Naples Federico II. Each sample was tested by adopting Oncomine Precision Assay (OPA), able to detect 2769 molecular actionable alterations [hot spot mutations, copy number variations (CNV) and gene fusions on fully integrated NGS platform (Genexus, Thermofisher Scientifics. (26,27) Concordance rate between these technical approaches was carried out. Results: Genexus system successfully carried out molecular analysis in all instances. A concordance rate of 96.9% (31 out of 32) was observed between OPA and SiRe™ panel both for DNA and RNA based analysis. A negative predictive value of 100% and a positive predictive value of 96.9% (62 out of 64) was assessed. Conclusions: Fully automatized Genexus system combined with OPA (Thermofisher Scientifics) may be considered a technically valuable, saving time sequencing platform to test predictive biomarkers in diagnostic routine practice.

Postprandial glucose levels between 4 and 7.9 hours (PPG4–7.9h) correlate with mortality from various diseases including hypertension, diabetes, cardiovascular disease, and cancer. This study aimed to assess if predicted PPG4–7.9h could diagnose diabetes. Two groups of participants were involved: Group 1 (4420 participants) had actual PPG4–7.9h, while Group 2 (8422 participants) lacked this measure but had all the diabetes diagnostic measures. Group 1 underwent multiple linear regression to predict PPG4–7.9h using 30 predictors, achieving accuracy within 11.1 mg/dL in 80% of the participants. Group 2 had PPG4–7.9h predicted using this model. Receiver operating characteristic curve analysis showed that predicted PPG4–7.9h could diagnose diabetes with an accuracy of 87.3% in Group 2, with a sensitivity of 75.1% and specificity of 84.1% at the optimal cutoff of 102.5 mg/dL. Simulation on 10,000 random samples from Group 2 revealed that 175 participants may be needed to investigate PPG4–7.9h as a diabetes diagnostic marker with a power of at least 80%. In conclusion, predicted PPG4–7.9h appears to be a promising diagnostic indicator for diabetes. Future studies seeking to ascertain its definitive diagnostic value might require a minimum sample size of 175 participants.

This paper analyses the COVID-19 crisis and its management, under the Austrian Economics. The attention is focused in the States’ coercive intervention, to evaluate the positive or negative effects of pandemic, according to the Principles of Political Economy and the theory of capital and economic cycles. The paper examines the specific case of massive intervention by governments and, especially, central banks in monetary and financial markets to deal with the pandemic by seeking to lessen its effects. Also, it is offered a critical analysis on simultaneous government policies involving taxes and an increase in public spending which are presented as the panacea and universal remedy for the evils that afflict the society, instead of promoting the transit to Wellbeing Economics. To conclude the review, there is a proposal of paradigm review, in the way to offer a sustainable model.

Cancer survival continues to improve in high-income countries, partly explained by advances in screening and treatment. Previous studies have mainly examined the relationship between individual dietary components and cancer prognosis in tumours with good therapeutic response (breast, colon and prostate cancers). The aim of this review was to assess qualitatively (and quantitatively where appropriate) the associations of dietary patterns and cancer prognosis from published prospective cohort studies, as well as the effect of diet interventions by means of randomized controlled trials (RCT). A systematic search was conducted in PubMed, and a total of 35 prospective cohort studies and 14 RCT published between 2011 and 2021 were selected. Better overall diet quality was associated with improved survival among breast and colorectal cancer survivors; adherence to the Mediterranean diet was associated to lower risk of mortality in colorectal and prostate cancer survivors. A meta-analysis using a random-effects model showed that higher versus lower diet quality was associated with a 23% reduction in overall mortality in breast cancer survivors. There was evidence that dietary interventions, generally combined with physical activity, improved overall quality of life, though most studies were in breast cancer survivors. Further cohort and intervention studies in other cancers are needed to make more specific recommendations.

Microplastics and nanoplastics (MP/NPs) have been found everywhere they have been searched. On the top of Everest, in the Mariana Trench, on the clouds e recently, microplastics have been discovered in the human placenta, meconium and babies’ feces. In this review we explain what the consequences of the presence of these pollutants in fetuses and newborns are, with particular attention to human breastfeeding. Finally, we outline the possible political and social solutions to the problem of plastic overproduction that characterizes the modern world.

An extension of the Stoney formula for the case of a back side metallized 8” silicon taiko wafer has been developed, in the elastic regime, within the frame of the theory of elasticity. A good correlation between the calculated warpage, determined by the stress released by a given back side metallization (BSM), and the corresponding experimental warpages of the same thick metal layers deposited on an 8” silicon taiko wafer provides evidences of the correctness of the developed theory. This development suggests the possibility to extend this approach to the case of 8” taiko wafers based on a wide band gap semiconductor such as silicon carbide (SiC).

Abdominal entry is the critical initial step of laparoscopic surgery as it is associated with unexpected complications. Acceptable working space is a prerequisite for safe minimal access surgery. Direct trocar insertion (DTI) technique has been often reported to be time-consuming and capable of causing injuries. We aim to facilitate conventional DTI employing an easy-to-use self-designed abdominal wall-lifting device, OneShot-M. We tested its safety in a porcine model. 18 pigs were randomized into three groups (n=6): open laparoscopy (Group A), DTI (Group B), DTI using OneShot-M (Group C), suitable for a 5-mm trocar. Outcomes were access time, entry-related minor and major complications. Median access time was shorter in C (43 seconds; range: 35-49 seconds), followed by B (82.5; 72-90) and A (190.5; 182-240). Statistically significant differences in procedural time between techniques were detected (p-value = 0.0005). Pairwise comparisons exhibited a statistically significant difference between A and C in terms of access time. Only one difficulty in entry was seen in C; pigs experienced several occurrences in A and B. This pilot study suggests that OneShot-M appears to be a technically feasible, fast and safe method for pneumoperitoneum induction in a porcine model, as it provides sufficient exposure of the operative field without access-related complications. Further clinical studies are needed.

The SARS-CoV-2 high infectivity is due to the functional polybasic furin cleavage site in the S protein. How it was acquired is unknown. There are two challenges to face: (i) an evolutionary model, to fit the origin of the coronavirus; and (ii) a molecular mechanism for the site acquisition. Here we show genomic fingerprints which are specific of Pangolin-CoVs, Bat-SARS-like (CoVZC45, CoVZXC21), bat RatG13 and human SARS-CoV-2 coronaviruses. This, along with phylogenetic analysis, we found that these species have the same evolutionary origin in the bat, including a genetic recombination of S gene between Pangolin-CoV (2017) and RatG13 ancestors. However, this does not explain why SARS-CoV-2 is the only of them with the furin site, which consists in four amino acid (PRRA) motif. The Arginine doublet is encoded by CGGCGG codons. Surprisingly, none of the Arginine doublet of other furin site of viral proteins from several type of viruses, are encoded by the CGGCGG codons. This makes it difficult to consider a virus recombination as mechanism for the PRRA acquisition. The origin of SARS-CoV-2, is the origin of the recognition cleavage site. The bat coronavirus RaTG13 appears to be the closest relative of the SARS-CoV-2, but was isolated in 2013. So, new RatG13 samples would provide insights into the acquisition of the polybasic motif.

Blockchain technology has emerged as a necessity for the decentralization of payment methods and transactions, but it has brought with it many properties of distributed systems that have made it a crucial technology for overcoming some of society's challenges, especially in the context of decentralizing services, transparency of information, availability, and security. Its architecture and communication methods, although possessing some complex nuances to understand, particularly for the lay audience in the field of distributed systems, protocols, and computer networks. In this article, we will explore some topics of distributed systems related to blockchain technology.

Objective: The goal of this study was to analyse the attitudes and perceptions of emergency and mental health nurses through the validation of the SM-GIBED scale in specialised care in Spain on alcoholics and other drug-dependent patients. Design and Setting: This cross-sectional study was developed using the Spanish hospital version of the Seaman-Mannello scale to denominate the SM-GIBED scale. Participants: 170 Emergency and Mental Health Nursing from five Spanish Hospitals. Intervention: Self-administered questionnaire to analiyse the perceptions and attitudes about the drug addict and the alcoholic. Primary and Secondary Outcome Measures: A descriptive and inferential analysis of the study variables was carried out. A psychometric analysis was performed to validate the scale. Results: A total of 170 questionnaires were collected from 257 healthcare workers. Overall, 99.1% of the participants had contact with drug-dependent patients during their professional experience. Nearly 75% had difficulties in treating them. The psychometric analysis of the SM-GIBED scale in the Spanish context obtained values of KMO = 0.655 and Bartlett's test p < 0.000. Cronbach's alpha of 0.738 was obtained from the reliability analysis. A reliability analysis of each of the SM-GIBED questions found no case with an alpha lower than 0.71. In conclusion, positive aspects include an ingratiating attitude and subject-to-subject communication when nurses self-define as empathic and non-paternalistic. Among the negative aspects, there is a lack of communication skills and assertiveness with these patients. This highlights a certain degree of resignation and dissatisfaction when working with drug addicts.

Durum wheat is an important staple food used to obtain several products. At first the wheat is milled to obtain different products: bran, semolina and flour. These products are the base of several artifacts with varying properties both from a nutritional point of view and flavoring characteristics. It is known that most elements concentrate in the outer layers of the wheat seed (pericarp and aleurone) so that the content of the elements vary a lot in the ground products. The present study investigates the characterizing elements of the milled products and the effect of cultivation protocol applied. We measured, by ICP-OES, the concentration of 28 elements in the whole seed and in any grinding products; the results show that only few elements characterize each product. Few elements, but different for each product, permit to disclose the kind of agri-cultural method used: organic or conventional protocol. Five elements: B, Cd, Cu, K, Se, are the most important to distinguish between organic and conventional agriculture by PCA and PLS analysis; these elements also permit some differentiation of products.

Isokinetic testing of the knee joint is the “gold standard” in strength assessment in sport especially in soccer, where it is part of pre-season screening to establish norms in case of injuries. There are many devices on the market that make it difficult to use of normative data. Isokinetics literature in females’ soccer players is scarce in comparison to males. Furthermore, evaluation protocols strongly differ from each other, using different ranges of speeds, movement patterns and output data. Thus, it is difficult for the researcher and the clinician to choose a correct protocol for isokinetic evaluation in female soccer players. The indexes of isokinetic performance that are widely accepted are the hamstring/quadriceps (H/Q) ratio and dominant/non-dominant (D/ND) ratio as reference. In this review are highlighted some common features of isokinetic testing in female soccer players of different levels of qualification. From this study, it emerges that, for a reliable test, 3 reps at the speed of 60°/sec in knee flexion/extension is preferable due to the high reliability and that an optimal H/Q ratio in healthy female soccer players of different level of qualification and age is 50%, while the interlimb differences (D/ND) should be below 10%.

There is an increasing pressure by community and customers forcing companies to insert environmental concerns in their practices. To help companies initiatives, the green bonds market was incepted. Our research question is how to select bonds in a growing billion-dollar market. This paper presents a multi-criteria decision analysis (MCDA) model to enable investors identify opportunities based not only in opinions, but grounded on objective facts. Analytic Hierarchy Process (AHP) and Complex Proportional Assessment (COPRAS) are two MCDA methods applied in this paper. Top-fifteen green bonds ranked by specialized media were assessed with the proposed MCDA model. Criteria included the Environmental Performance Index (EPI) proposed by Yale University, and common financial indicators as assets, risks (β), and dividends. The new AHP–COPRAS rank is compared with another published by specialized media.