The effect of legumes adapted to a temperate climate on gas production kinetics, enteric methane, and rumen fermentation in vitro was evaluated. The species studied were Acacia dealbatha, Acacia melanoxylon, Albizzia lopantha, Lupinus pubescens, Inga insignes, Senna multiglandulosa and Tecoma stans. The effective degradation of the dry matter was estimated, the in vitro gas production was measured up to 120 hours of incubation, and the production of enteric methane, VFAs, and ammonia were measured at 24 hours. Dry matter, organic matter, ash, crude protein, neutral detergent fiber, acid detergent fiber, and acid detergent lignin were evaluated. The content of total phenols and condensed tannins was quantified. To determine digestibility, the samples were incubated for up to 120 hours. I. insignes presented a higher dry matter content and a high crude protein content. L. pubescens presented low dry matter digestibility. The neutral detergent fiber content was higher in I. insignes and with a higher value in dry matter digestibility and lower content of total phenols and condensed tannins. While S. multiglandulosa showed low detergent acid fiber content. The acid detergent lignin value was higher in I. insignes and lower in L. pubescens. In vitro gas and enteric methane production was higher in L. pubescens. propionic acid and ammonia they were higher in S. multiglandulosa. It is concluded that the amount of secondary compounds affects methane production, compromises digestibility and rumen kinetics of the legumes studied.

Probiotics are microorganisms infused in products for health benefits including acceleration of nutrient digestion, however, it is also important to ensure the safety prior to incorporation. Here, we present evidence of the ability of two probiotic isolates,Lacticaseibacillus paracasei BCRC-16100 and Lacticaseibacillus paracasei ZFM54, in the (1) enhancement of carbohydrate digestion, (2) tolerance to stress, and (3) antibiotic resistance. Approaches include whole genome sequence (WGS) analysis and bioactivity assays. WGS revealed genes suggesting the ability of the two isolates to promote carbohydrate digestion, tolerance to stress and antibiotic resistance. Carbohydrate digestive ability was confirmed through a biochemical assay where the two isolates cause glucose release from starch. The two isolates also showed versatility in a range of temperature and alcohol concentration. For antibiotic resistance particularly on vancomycin, there are three mechanisms namely transporter control, transcriptional regulation, and efflux pump. Furthermore, promoter and transposable element analysis showed that some of the active antibiotic resistant (AbR) genes can be laterally transferred. Altogether, we show the potential of two probiotic isolates to be incorporated in products for improved carbohydrate digestion and the need to address the removal of active and mobile antibiotic resistance genes that may compromise safety.

A realistic implementation of an all-fiber CO₂ sensor, using 74 cm of hollow core PCF fiber as the cavity for light/gas interaction, has been implemented. It is based on CO₂ absorbance in the 2 μm region. The working range is from 2% to 100% CO₂ concentration at 1 atm total pressure. The response time obtained was 10 min. The use of an FBG tuned fiber ring laser, specifically designed for this application, is discussed and preliminary results with this laser are also presented.

The Surface Urban Heat Island (UHI) is caused by the difference in temperature between the urban and its surrounding areas. However, in the scientific literature, there is no solid methodology defining urban and non-urban areas, which is essential to estimate the SUHI with greater accuracy. This study uses the official national urban areas limit, to obtain the SUHI more accurately on the nine northeastern Brazilian capitals. The land surface temperature was obtained using the Sentinel 3 satellite data for the years 2019 and 2020. Afterward, the maximum and average SUHI, and the complementary indexes were calculated, such as the Urban Thermal Field Variation Index (UTFVI) and the Thermal Discomfort Index (TDI) for the urban areas and their surrounding areas. The Maximum and Average SUHI, obtained values between 1.85 and 8.25 and -4.92 and 2.59 degree difference, respectively, proving the SUHI existence in the study areas. The UTFVI, with values between 0.010 and 0.040, expresses how bad the eco-environmental spaces of urban are. The TDI, with values between 24.61 and 28.89 ºC, expresses the population’s thermal comfort. Therefore, this study provides a better understanding of the surface UHI pioneeringly for the Brazilian Northeast Region.

Background: Metabolic syndrome (MS) is associated with a greater risk of morbimortality. Ob-jective: To estimate the prevalence of Metabolic Syndrome (MS) and associated factors in patients of a Psychosocial Care Center (CAPS) in the city of Salvador, state of Bahia, Brazil. Method: Cross-sectional study set at CAPS in the city of Salvador-Bahia, between August 2019 and February 2020. MS was evaluated according to the National Cholesterol Education Program's Adult Treatment Panel III. In addition to descriptive statistics, gross and adjusted prevalence ratios were described. Results: MS was found in 100 (35.2%) individuals, 116 (40.9%) were obese and 165 (58.1%) had increased waist circumference. Polypharmacy was identified in 63 (22.3%) patients and 243 (85.9%) used antipsychotics. In the gross evaluation, the female (PR = 1.88; 95% CI: 1.35-2.63) and the use of antidepressants (PR = 1.41; 95%CI: 1.05-1.88) were associated with MS. After logistic re-gression, depression (PR = 1.86; 95%CI: 1.38-2.51), acanthosis (PR = 1.50; 95%CI: 1.18 - 1.90), use of antipsychotics (PR = 1.88; 95%CI: 1.13 - 2.75) and the hypertriglyceremic waist (PR = 3.33; 95%CI: 2.48- 4.46) were associated with MS. Conclusion: The prevalence of MS alerts to multimorbidity among individuals with mental disorders and the need for clinical screening.

The development of an equipment starts from an effective design activity. The concept selection process is an activity that is entailed in the design stage and its relevance in the design process cannot be overemphasized because it informs the choice of optimal conceptual design from a set of alternative design. Hence, there is a need to accrue efforts to the concept selection process because of its importance. This article presents the identification of optimal conceptual design as a Multicriteria decision making model by assessing the suitability of Fuzzy Measurement Alternatives and Ranking according to COmpromise Solution (MARCOS). The Fuzzy MARCOS model was developed to access four alternative conceptual designs of briquetting machines considering eight design features with several sub features. The fuzzy MARCOS model was able to rank the conceptual designs and the results obtained from the decision analysis showed that the Fuzzy MARCOS model was able to rank the designs based on their performance and the final values of the overall utility function. The overall utility function is a based on the utility degree of the conceptual design alternatives in terms of the best and worst designs identified by the model. The utility degree created a platform for comparison on how the design alternatives varies from the best and worst design.

Abstract: The aim of the present study was to identify the age and sex-related associations between marital status with PA and TV time. We used data from Vigitel, an annual telephone survey started in 2006 in Brazil. We applied a complex sample logistic regression model to estimate the odds for PA and TV time comparing marital statuses according to age and sex subgroups, independent of obesity, hypertension, diabetes, self-assessed poor health, and smoking. Our sample included 561,837 individuals with a TV time > 3 h/day (prevalence = 25.2%) and PA > 150 min/week (prevalence = 35%). Compared to single individuals, married men and women were less likely to watch TV more than 3 h/day in participants > 30 years old. When compared to single, married participants were less likely to do more than 150 min of PA/week at younger age groups. Married women older than 40 years were more likely to do more than 150 min of PA/week than the single ones, while there were no differences among married men by age group. In conclusion, married individuals are less likely to spend more than 3 hours a day watching TV than single individuals. Single men and women were more likely to do more than 150 min of PA/week at younger age groups and married women older than 40 years were more likely to do 150 min of PA/week than single women.

Abstract: The objective of this meta-analysis was to evaluate the factors associated with mortality of elderly Italians diagnosed with the new coronavirus who resided in institutions or who were hospitalized as a result of the disease. Methods: A systematic review following the recommenda-tions of The Joanna Briggs Institute (JBI), where the PEO strategy was utilized - Population, Exposure and Outcome. P, being the elderly over 65 years old. E, the SARS-CoV_2 pandemic. O, mortality. The NCBI / PubMed, LILACS, EMBASE and CINAHL databases were used until July 31, 2020.; Results: Five Italian studies were included in the meta-analysis, with the number of elderly people varying between 18 and 1591 patients. The main morbidities presented by the elderly in the studies were: dementia, diabetes, chronic kidney disease and hypertension. Conclusions: The factors as-sociated with the mortality of elderly Italian people diagnosed with SARS-CoV-2 who lived in in-stitutions or who were hospitalized because of the disease were evaluated. It was found that de-mentia, diabetes, chronic kidney disease and hypertension are the main the main diagnosed dis-eases for mortality in elderly people with Covid-19.

This paper proposes a model to evaluate business projects to get into an incubator, allowing to rank them in order of selection priority. The model combines the Momentum method to build prospective scenarios and the Multiple Criteria Decision Making (MCDM) method TOPSIS-2N to rank the alternatives. Six business projects were evaluated to be incubated. The Momentum method made it possible for us to create an initial core of criteria for the evaluation of incubation projects. The TOPSIS-2N method supported the decision to choose the company to be incubated by ranking the alternatives in order of relevance. Our evaluation model has improved the existing models used by incubators. This model can be used and / or adapted by any incubator to evaluate the business projects to be incubated. The set of criteria for the evaluation of incubation projects is original and the use of prospective scenarios with a MCDM method to evaluate companies to be incubated does not exist in the literature.

This study introduces an innovative optimization method to identify the optimal configuration of a sparse symmetric 2D array for applications in security, particularly multistatic imaging. Utilizing Genetic Algorithms (GA) in a sophisticated optimization process, the research focuses on achieving the most favorable antenna distribution while mitigating the common issue of secondary lobes in sparse arrays. The main objective is to determine the ideal configuration from specific design parameters, including hardware specifications such as number of radiating elements, minimum spacing, operating frequency range, and image separation distance. The study employs a cost function based on the the point spread function (PSF), the system response to a point source, with the goal of minimizing the secondary lobe levels and maximizing their separation from the main lobe. Advanced simulation algorithms based on Physical Optics (PO) are used to validate the presented methodology and results.

Background: Clinical cases reports with snake accidents show that venom bite induces increased oxidative stress including several markers of lipid peroxidation and other oxidative stress marker in plasma. Methods: The main findings of this work were performed with BthTx-II on paw edema of animals treated with the toxin and biochemical measurement of COX-2, PGE2, MDA and the effects of peroxiredoxin inhibitors on edema and myotoxicity were also evaluated. Results: The results show that edema and myotoxocity induced by PLA2 (BthTx-II) induces a strong mobilization of arachidonic acid and an increase in cellular oxidative stress as measured by increased malondialdehydo (MDA) concentration and protein carbonylation. Thus, these findings establish the strong link between oxidative stress, arachidonic acid mobilization and that these events may explain the presence of oxidative stress markers in snake-bitten patients. Experiments performed with animals previously treated with commercially purchased inhibitors showed enzymes such as thioredoxin (TXN), thioredoxin reductase (TXNRD) and other glutathione (GSH)-related antioxidant defenses could play an essential role controlling and defining the end of edema on the late phase of PLA2 BthTx-II-induced process. Conclusion. This study showed that thioate-dependent antioxidant enzymes play an important role in resolving the edema induced by BthTx-II.

This work describes a resonance Raman study performed in domes of monolayer MoS2 using 23 different laser excitation energies covering the visible and near-infrared (NIR) ranges. The multiple-excitation results allowed us to investigate the exciton-phonon interactions of different phonons (A1’, E’ and LA) with different electronic and excitonic optical transitions in biaxially strained monolayer MoS2. The analysis of the intensities of the two first-order peaks, A1’ and E’, and the double-resonance 2LA Raman band as a function of the laser excitation furnished the values of the energies of the indirect gap and the excitonic transitions in the strained MoS2 domes. It was noticed that the out-of-plane A1’ phonon mode is significantly enhanced only by the indirect gap I and the C exciton, whereas the in-plane E’ mode is only enhanced by the C exciton of MoS2 dome, revealing thus a weak interaction of these phonons with the A and B excitons in the strained MoS2 domes. On the other hand, the 2LA Raman band is significantly enhanced at the indirect gap I transition and by the A (or B) exciton, but not enhanced by the C exciton, showing thus that the LA edge-phonons that participate in the double resonance process in MoS2 have a weak interaction with the C exciton.

Background: Histoplasmosis is a systemic mycosis, present globally. We aimed to describe cases of histoplasmosis (Hc) and to establish a risk profile associated to Hc in HIV-infected patients (HIV+). Methods: This was a retrospective study of patients with a clinical-. laboratorial diagnosis of Hc. Data was fed into REDCap and statistical analysis was done with R . Results: We included 99 records, 65 HIV+ and 34 HIV-. Average age was 39 years. Median time from onset to diagnosis was 8 weeks in HIV- and 22 weeks in HIV+. Disseminated histoplasmosis occurred in 79.4% HIV+, vs 36.4% HIV-. Median CD4 count was 70. Co-infection with tuberculosis was present in 20% of HIV+. Blood cultures were positive in 32.3% of HIV+ vs 11.8% of HIV- (p=0.025); bone marrow culture was positive in 36.9% vs 8.8%(p=0.003). Most HIV+ patients (71.4%) were hospitalized. On univariate analysis, anemia, leukopenia, intensive care, use of vasopressors and mechanical ventilation were associated with death in HIV+. Conclusions: Most of our patients with histoplasmosis were HIV+, presenting advanced AIDS. Diagnosis was late in HIV+ patients, and they frequently presented disseminated Hc, required hospitalization, and died. Early screening for Hc in HIV+ and drug induced immunosuppressed patients is crucial.

Abstract: MicroRNAs can interfere with a protein function by suppressing their messenger RNA translation or the synthesis of its related factors. The function of brain-derived neurotrophic factor (BDNF) is essential to the proper formation and function of the nervous system and is seen to be regulated by many microRNAs. However, understanding how microRNAs influence BDNF actions within cells requires a wider comprehension of their integrative regulatory mechanisms. Aim: In this literature review, we have synthesized the evidence of microRNA regulation on BDNF in cells and tissues, and provided an analytical discussion about direct and indirect mechanisms that appeared involved in BDNF regulation by microRNAs. Methods: Searches were conducted on PubMed.gov using the terms “BDNF” AND “MicroRNA” and “brain-derived neurotrophic factor” AND “MicroRNA”, updated on September 1st, 2023. Papers without open access were requested from the authors. One hundred and seventy-one papers were included for review and discussion. Results and Discussion: The local regulation of BDNF by microRNAs involves a complex interaction between a series of microRNAs with target proteins that can either inhibit or enhance BDNF expression, at the core of cell metabolism. Therefore, understanding this homeostatic balance provides resources for the future development of vector-delivery-based therapies for the neuroprotective effects of BDNF.

(1) Context: Cancer triggers significant changes in family dynamics. It is noteworthy that coping and problem-solving skills, particularly in situations involving cancer in children and adolescents, have not been adequately explored in the context of family adaptation. This study aims to analyze the effectiveness of family interventions in coping to improve problem-solving skills in parents and/or caregivers of children and adolescents during and after oncological treatment. (2) Methods: This is a scoping review following the recommendations of the Joanna Briggs Institute and the Systematic Reviews and Meta-Analyses Extension for Scoping Review (PRISMA-ScR), from 2014 to 2024, in the databases LILACS, CINAHL, SCOPUS, Web of Science, and PUBMED. (3) Results: Forty-five studies were eligible. Coping strategies were categorized as follows: (1) positive attitudes (including a sense of courage and hope, family support to enhance resilience, and future planning), (2) caregiver empowerment (involving acceptance of diagnosis, emotional distancing, and coping through religiosity), and (3) communication skills (encompassing professional communication, horizontal dialogue with healthcare teams, and sincere communication with friends and family). (4) Conclusions: Over time, families develop coping and problem-solving strategies that influence changes in family functioning patterns, aiding them in accepting, reinterpreting, and reframing ideas and feelings associated with neoplasia.

Catalytic studies for hydrogen production via steam reforming of ethanol (SRE) are essential for process optimization. Likewise, selecting the ideal support for the active phase can be critical to achieve high conversion rates during the catalytic steam reforming. In this work, copper-based catalysts were synthesized using two different supports, NaY zeolite and Nb2O5/Al2O3 mixed oxides. The materials were prepared using wet impregnation and characterized for their physicochemical properties using different analytical techniques. Differences in catalyst morphologies were readily attributed to the characteristics of the support. The Cu/NaY catalyst showed better textural properties than Cu/Nb2O5/Al2O3, resulting in a homogeneous metal dispersion over the support surface. Both catalytic systems were active in SRE, but Cu/NaY resulted in higher ethanol conversions compared to Cu/Nb2O5/Al2O3. Hence, the performance of copper-based catalysts was influenced significantly by the textural properties of the support.

The objective of this study was to evaluate the evolution of the Syrah red and sparkling Moscatel wines stored for 12 months in green, amber and clear bottles. The phenolic compounds profile and antioxidant activity in vitro were determined. Commercial wines were bottled in an automatic filling machine, stored and analyzed every three months for one year. Several phenolic compound families were quantified through reversed-phase high performance liquid chromatography (RP-HPLC) coupled to diode-array detection (DAD) and fluorescence detection (FD). The different bottle colors studied did not influence the evolution of the sparkling Moscatel and Syrah red wines, since the main variations obtained were related to storage time. The main changes were observed in the Syrah wine, where storage time was associated with an increase in hue (h*), decrease in catechins, increase in procyanidins and, most notably, a decrease in the anthocyanin malvidin 3-glucoside. In general, the wines showed good stability in relation to the antioxidant activity in vitro.

Background: School meals represent a significant supply of nutrients for children in Brazil, especially those in conditions of social vulnerability. Objectives: This study aimed to assess the levels of arsenic (As), cadmium (Cd), and lead (Pb) in meals served in public elementary schools in four municipalities in the state of Bahia, Brazil, and assess the risk posed to children's health. Methods: Ninety-six samples were collected from 16 schools, freeze-dried, and subjected to microwave-assisted digestion. The As, Cd, and Pb levels were determined by graphite furnace atomic absorption spectrometry. The risk assessment was based on calculating each element's hazard quotient (HQ). Results: None of the samples reached or exceeded the tolerable levels for the elements analyzed. Pb was the metal that obtained the most significant result, reaching maximum levels of 39-157 µg.kg-¹. Conclusions: No element exceeded the PTWI proposed by JECFA; thus, the toxic metal content in school meals poses a negligible risk to children´s health.

The giant challenge breeding flood-irrigated rice is to identify superior genotypes that present high-yielding with specific grain qualities, resistance to abiotic and biotic stresses, excellent adaptation to the target environment. Thus, the objectives of this study were to propose a bayesian multi-trait model, estimate genetic parameters, and select flood-irrigated rice genotypes with better genetic potentials in different evaluation environments. For this, twenty-five rice genotypes belonging to the flood-irrigated rice improvement program were evaluated. The grain yields, grain length, width and thickness, grain length, and grain width and weight of 100 grains in the agricultural year 2016/2017. The experimental design used in all experiments was a randomized block design with three replications. The Monte Carlo Markov Chain algorithm estimated genetic parameters and genetic values. The grain thickness trait was considered highly heritable, with a credibility interval ranging from: h^2: 0.9480; 0.9440; 0.8610, in environments 1, 2, and 3, respectively. The grain yields showed a low correlation estimate between grain thickness and 100-grain weight, in all environments, with a credibility interval ranging from (ρ= 0.5477; 0.5762; 0.5618 and 0.5973; 0.5247; 0.5632, grain thickness and 100-grain weight, in environments 1, 2, and 3, respectively). The Bayesian multi-trait model proved to be an adequate strategy for the genetic improvement of flood-irrigated. Genotypes 2 and 15 had similar potential in the three environments, they should be selected as high-performance multi-trait genotypes for the genetic breeding of flood-irrigated rice in the program.

This article describes the study and digital implementation of a system onboard a TMS 3208F28335 ® DSP for vector control of the bearing motor speed with 4 poles split winding with 250W of power. Smart techniques: ANFIS and Neural Networks were investigated and computationally implemented to evaluate the bearing motor performance under the following conditions: operating as an estimator of uncertain parameters and as a speed controller. Therefore, the MATLAB program and its toolbox were used for the simulations and the parameter adjustments involving the structure ANFIS (Adaptive-Network-Based Fuzzy Inference System) and simulations with the Neural Network. The simulated results showed a good performance for the two techniques applied differently: the estimator and a speed controller using both a model of the induction motor operating as a bearing motor. The experimental part for velocity vector control uses three control loops: current, radial position, and speed, where the configurations of the peripherals, that is, the interfaces or drivers for driving the bearing motor.

The global craft beer market is witnessing substantial growth, with a particular spotlight on sour beers. These unique brews are created through lactic fermentation initiated by lactic acid bacteria (LAB). However, the presence of hops, renowned for their antimicrobial properties, can pose a limitation within the realm of sour beer production. This research aims to explore and assess the potential of sour beer as a probiotic beverage. It involves a comparative analysis of the viability of Lacticaseibacillus paracasei subsp. paracasei F19 (F19) and 431 (L431) in a sour beer with an International Bitterness Unit (IBU) value of 26.65, alongside examining the ex-pression of genes such as horA, horB, horC, hitA, bsrA, and recA, which are associated with hop resistance. The study encompasses the development of two formulations of sour beers characterized by both high hop content and a robust probiotic count (8.44 – 8.77 log CFU/mL). The findings suggest that both probiotic strains of F19 and L431, are well-suited to produce sour beers with elevated hop levels, demonstrating excellent stability. Notably, the expression of genes responsible for hops resistance exhibited distinct modulation patterns among the two strains. It appears that a higher concentration of bsrA, as observed in strain L431, may be more effective in mitigating the effects of hop-related stress, potentially surpassing the combined expression of horA and bsrA. Nonetheless, further research is essential to validate this observation in gene expression. F19 and L431 emerge as promising candidates for the development of sour beers with increased hop intensity.

Efficient alternatives in energy production and consumption are constantly investigated by increasingly strict policies. In this way, the pollutant emissions that contribute to the greenhouse effect reduce and sustainability of the electricity sector increase. With more than a third of the world's energy consumption, buildings have great potential to contribute these sustainability goals. Additionally, with growing incentives in the Distributed Generation (DG) and Electric Vehicle (EV) industry, it is believed that Smart Buildings (SBs) can be a key in the field of residential energy sustainability in the future. In this work, an energy management system in SBs are developed to reduce the power demanded of a residential building. In order to balance the demand and power provided by the grid, microgrids such as Battery Energy Storage System (BESS), EVs and Photovoltaic Generation panels (PV) are used. Here, a Mixed Binary Linear Programming formulation (MBLP) is proposed to optimize the charge and discharge scheduling of EVs and also BESS. In order to show the efficiency of the model, a case study involving three scenarios and an economic analysis is considered. The results point a 65% reduction in peak load consumption supplied by grid and a 28.4% reduction in electricity consumption costs.

We present an open-source Star Tracker (ST) for Attitude Determination. Our implementation makes use of open source software of common usage in astronomy running on a Raspberry Pi 2 platform. The developed platform is open and available for parties interested in further development. Evaluation of the system showed that the ST is suitable for Cubesats of 2U or larger. The ST platform is capable of solving the Lost-In-Space (LIS) problem. Currently, the average accuracy reached of the algorithm is close to 5 seconds of arc with an average processing time of 75 seconds. However, a average accuracy of about 3 minutes of arc can be reached with 35 seconds in average processing time. We also describe the evaluation procedure, the found conclusions of this procedure, in particular the section of the algorithm where most of the processing time is spent and other possible source of errors not included in this study.

3D bioprinting, like 3D printing, is a process that builds structures by depositing material layer by layer. In the specific case of bioprinting, these layers are composed of a biocompatible material together with living cells, allowing the creation of three-dimensional structures that recreate functional tissues and organs. Bioprinting cell-laden structures is complicated by the high rate of cell damage and stress that occurs during the process, caused by the high pressures and stresses to which they are subjected. To minimise damage during the process, it is important to study and optimise certain bioprinting conditions beforehand and to analyse how they affect the cells by means of computational simulations. In this review, both quantitative and qualitative data are collected to improve the nozzle geometry through computational simulation studies. Optimal ranges for nozzle diameter (0.2-1mm) and length (8-10mm; 300-900μm) have been defined, and recommendations for improving nozzle performance during bioprinting, such as the provision of an inner angle of 20-30°, an inner EDTA coating and a shear stress of less than 10kPa, have been gathered. Finally, based on the data collected, a design of experiments is proposed to obtain an optimal bioprinting configuration for a particular bioink.

Nanocrystalline silicon oxide (nc-SiOx:H) is a multipurpose material with its varied application in solar cells as a transparent front contact, intermediate reflector, back reflector layer and even tunnel layer for passivating contacts, owing to easy tailoring of its optical properties. In this work, we systematically investigate the influence of gas mixture (SiH4, CO2, PH3 and H2), RF power and process pressure on the optical, structural and passivation properties of thin n-type nc-SiOx:H films prepared in an industrial, high throughput, plasma-enhanced chemical vapor deposition (PECVD) reactor. We provide a detailed description of the n-type nc-SiOx:H material develop-ment using various characterization techniques (SEM, EDX, Raman spectroscopy, and spectro-scopic ellipsometry) with a focus on the relationship between the material properties and the pas-sivation they provide to n-type c-Si wafers characterized by their effective carrier lifetime (τeff). Further, we also outline the parameters to be kept in mind while developing different n-type nc-SiOx:H layers for different solar cell applications. We report a tunable optical gap (1.8 – 2.3 eV) for our n-type nc-SiOx:H films as well as excellent passivation properties with τeff up to 3.5 ms (iVoc ~ 715 mV) before annealing. Oxygen content plays an important role in determining the crystallinity and hence passivation quality of the deposited nanocrystalline silicon oxide films.

Geoenvironmental engineering involves defining solutions for complex problems, such as containment systems management, contaminant transport control, wastewater management, remediation of contaminated sites and valorization of geomaterials and wastes. In the last years, energy harvesting (EH) - or energy scavenging - methods and technologies have been developed to reduce the dependence on traditional energy sources, namely fossil fuels, and nuclear power, also responding to the increase of energy demands for human activities and to fulfill sustainable development goals. EH in geoenvironmental works and surrounding soil and water environment include a set of processes for capturing and accumulating energy from several sources considered deemed wasted or unusable associated to soil dynamics, stress and strain of geomaterials, hydraulic, vibrations, biochemical, light, heating and wind sources can be potential EH systems. Therefore, this work presents a review of the literature and critical analysis on the main opportunities for EH capturing, accumulating and use in geoenvironmental works, among basic electric concepts and mechanisms, analyzing those works in complex conditions involving biological, chemical, mechanical, hydraulic, and thermal coupled actions, concluding with the main investigation and challenges within geoenvironmental aspects for EH purpose.

The intricate mechanisms of the immune response elicited by vaccines and the interplay between the immune system and the central nervous system (CNS) are poorly understood. This review explores these mechanisms, emphasizing the interplay between the immune system and the central nervous system (CNS). A critical aspect is the examination of how vaccine-induced immune responses can interact with the CNS, influencing neuroinflammation and neuroimmune interactions. Furthermore, the link between vaccination and persistent symptoms observed in long-COVID patients is discussed. Vaccination initiates a complex cascade of events, starting with the production of specific proteins, such as S1/S2 spike proteins, leading to robust immune activation in the axillary lymph nodes. The role of macrophages and antigen-presenting cells (APCs) in cytokine production, antigen presentation, and the stimulation of B and T cells highlights the sophistication of the adaptive immune response. The migration of immune cell-derived exosomes to the brain plays a dynamic role in CNS inflammation, neurodegenerative processes and long COVID. On the other hand, the prolonged presence of viral and vaccine-derived spike proteins may contribute to the complex pathophysiology of Long-COVID, shedding light on the delicate balance between beneficial immune responses and possible adverse neurological outcomes of vaccination. It is worth rigorous monitoring and further research to understand the mechanisms of neuroinflammation and the persistence of spike proteins and their long-term effects on the brain, emphasising the importance of a nuanced approach to vaccine safety and efficacy in the context of COVID-19 and beyond.Principio del formulario

In this work, optimal consumption and investment strategies are derived for risk-averse investors under the 4/2 stochastic volatility class of models. We work under an expected utility (EUT) framework and consider a Constant Relative Risk Aversion (CRRA) investor, who might also be ambiguity-averse. The corresponding Hamilton-Jacobi-Bellman (HJB) and HJB-Isaacs (HJBI) equations are solved in closed-form for a subset of the parametric space and under some restrictions on the portfolio setting, for complete markets. Conditions for proper changes of measure and well defined solutions are provided. These are the first analytical solutions for the 4/2 stochastic volatility model and the embedded 3/2 model for the type of excess returns established in .

The mechanisms underlying the establishment of asymmetric structures during development remain elusive. The wing of Drosophila is asymmetric along the Anterior-Posterior (AP) axis, despite that its growth signals that drive its growth are presumably symmetric. Here, we investigated the contribution of cell recruitment, a process that drives wing fate differentiation in Drosophila, to the asymmetric shape and pattern of the adult wing. Genetic impairment of cell recruitment results in a significant reduction in adult wing asymmetry, primarily affecting the region between longitudinal vein 5 and the wing margin (L5-M). Morphometric analysis reveals that the lack of cell recruitment results in a more symmetric wing with respect to the AP, suggesting a contribution of cell recruitment to the establishment of asymmetry in the adult wing. A close examination of the expression of the wing selector gene vestigial (vg) in wing disc does not support this hypothesis. However, the circularity of the Vg pattern significantly increase in recruitment-impaired wing disc, suggesting that while the decrease of the L5-M region in the adult wing may not be attributed to cell recruitment, it could contribute to the overall asymmetry of the adult wing. We conclude that cell recruitment, a widespread mechanism that participates in growth and patterning of several developing systems, could drive, at least partially, the asymmetric shape of the Drosophila wing.

The knowledge of COVID-19 impact on the human body has increased rapidly. Although many people recover from COVID-19, some continue to experience persistent symptoms that have been identified as Long COVID. This condition can have a severe impact on quality of life, and it remains a significant concern for medical professionals and researchers. One of the key components of the SARS-CoV-2 virus that enables it to enter human cells is the spike (S) protein. Recent studies have revealed a complex network of interactions between G proteins, spike (S) protein, and the Renin-Angiotensin System (RAS) may be responsible, at least in part, for long COVID. SARS-CoV-2 can also affect the brain, leading to neurological symptoms such as confusion, memory loss, and fatigue. Increasing evidence suggests that COVID-19 is not just a respiratory illness since it is likely that the virus could influence signal transduction pathways such as G-protein-coupled receptor (GPCR), among others, in the brain, either directly or indirectly, affecting neural functions. These interactions with the spike (S) protein and RAS, alongside the brain, are complex and require deep research to understand their implications for Long COVID-19 manifestation fully. While recent research has shed light on the complex interactions between G proteins, spike (S) protein, the brain, and the angiotensin system, this article explores these interconnected pathways and their implications for long COVID-19 manifestations. The present review summarises current research on different molecular mechanisms in Long COVID pathophysiology and may help identify possible targets or new strategies for the diagnosis and treatment.

The industry is increasingly relying on fish for toxicity assessment. However, current guidelines for toxicity assessment focus on teratogenicity and mortality. From an ecotoxicological point of view, however, these endpoints may not reflect the “full picture” of possible deleterious effects that can nonetheless result in decreased fitness and/or inability to adapt to a changing environment, affecting whole populations. Therefore, assessing sublethal effects add relevant data covering different aspects of toxicity at different levels of analysis. Impacts of toxicants on neurobehavioral function have the potential to affect many different life-history traits, and are easier to assess in the laboratory than in the wild. We propose that carefully-controlled laboratory experiments on different behavioral domains – including anxiety, aggression, and exploration – can increase our understanding of the ecotoxicological impacts of contaminants, since these domains are related to traits such as defense, sociality, and reproduction, directly impacting life-history traits. The effects of selected contaminants on these tests are reviewed, focusing on larval and adult zebrafish, showing that these behavioral domains are highly sensitive to small concentrations of these substances. These strategies suggest a way forward on ecotoxicological research using fish.

Considering the various problems caused by infiltration in civil construction, this study aimed to identify the most appropriate waterproofing methods for different types of surfaces. A study was conducted on the mechanisms of water infiltration on surfaces and the waterproofing methods available on the market, focusing on asphalt blankets, in addition to a literature review highlighting state-of-the-art on this topic. A case study was also conducted in residence in Nova Lima, Brazil, analyzing different waterproofing techniques, including their characteristics and stages. Among the conclusions, it is highlighted that the implementation of adequate project, installation, inspection, and maintenance techniques can significantly reduce the waterproofing failure rate and repair costs and that the excellent choice of materials, along with the skill of the labor force in the application, is fundamental to guarantee the adequate performance of these materials in buildings.

Several studies have already demonstrated the relationship between the loss of natural habitats and the incidence of diseases caused by vectors, such as dengue, which is an acute fever disease, considered a serious public health problem. The aim of the present study was to analyze the relationship between land use changes between 2009 and 2019 and the occurrence of dengue fever in 2015 and 2019 by municipality, using the state of Minas Gerais as a case study. For this, secondary data obtained from openly available sources were used. Natural vegetation cover data were obtained from the MAPBiomas platform and dengue occurrence data from the Ministry of Health, in addition to socioeconomic indicators from the Brazilian Institute for Geography and Statistics. Between 2015 and 2019, 1,255,731 cases of dengue were recorded throughout the state of Minas Gerais, ranging from 0 to 227 per thousand inhabitants between municipalities. The occurrence of dengue was distributed throughout all regions of Minas Gerais, affected by climatic and socioeconomic aspects. In general, municipalities with net loss of natural vegetation, predominantly located in the Cerrado biome, had the highest number of dengue cases in the studied period. Despite the significant positive relationship between these two variables, three of the eight socioeconomic parameters analyzed also affected the occurrence of dengue: population density, human development index (both positively) and Gini inequality index (negatively). These results indicate that, contrary to expectations, municipalities with better social conditions had more dengue cases. Our study indicates that natural vegetation is, directly or indirectly, involved in the ecosystem service of dengue control, despite the occurrence of this disease being affected by multiple factors that interact in a complex way. Thus, policies towards reducing deforestation must be complemented by a continuous investment in public health policies and reduction of social inequalities to efficiently control dengue fever.

This short paper reveals a simple methodology to create local-correlation models suitable for the closed-form pricing of multi-asset financial derivatives. The multivariate models are built to ensure two conditions, first, marginals follow desirable processes, e.g. we choose the Geometric Brownian Motion (GBM), popular for stock prices. Second, the payoff of the derivative should follow a desired one dimensional process. These conditions lead to a specific choice of the dependence structure, in the form of a local-correlation model. Two popular multi-asset options are entertained, a spread option and a basket option.

Glycerol is a subproduct of biodiesel production and represents an important problem when generated in large scale. Alternatives that can utilize this unrefined byproduct is of potential interest. It is herein described the synthesis of a series of 1,2,3-triazoles using glycerol as starting material. The key step involved in the preparation of triazolic derivatives corresponded to the Copper(I)-catalyzed Azide-Alkyne Cycloaddition (CuAAC), also known as click reaction, between 4-(azidomethyl)-2,2-dimethyl-1,3-dioxolane (3) and different terminal alkynes. The eight prepared derivatives were evaluated with regard to their fungicide, phytotoxic and cytotoxic activities. The fungicide activity was assessed in vitro against Colletotrichum gloeosporioides, the causing agent of papaya anthracnose. It was found that the compounds 1-(1-((2,2-dimethyl-1,3-dioxolan-4-yl)methyl)-1H-1,2,3-triazol-4-yl)cyclohexanol (4g) and 2-(1-((2,2-dimethyl-1,3-dioxolan-4-yl)methyl)-1H-1,2,3-triazol-4-yl)propan-2-ol (4h) demonstrated high efficiency on controlling C. gloeosporioides when compared to the commercial fungicide tebuconazole. The triazoles did not present any phytotoxic effect when evaluated against Lactuca sativa. However, five derivatives were mitodepressive, inducing cell death detected by the presence of condensed nuclei and acted as aneugenic agents in the cell cycle of L. sativa. It is believed that glycerol derivatives bearing 1,2,3-triazole functionalities may represent a scaffold to be explored toward the development of new agents to control C. gloeosporioides.

Buildings are subject to intrinsic and extrinsic failures at all stages of the construction process, i.e., design to occupancy (i.e., use) as several failure types can affect them. There are three basic steps for researching building failures: listing, cataloging, and solving/deciding whether highlighting the least invasive and lowest cost intervention. Therefore, this research presents some methods used in construction for the intervention prioritization and seeks to illustrate the most suitable methodology for different settings failure x diagnosis x intervention. Therefore, the most traditional tools are shown: BASICO, SWIFT, FEMEA, AAF, and GUT matrix, where a critical assessment of the strengths and weaknesses is carried out. After that, a case study on maintenance services for the moisture on the building facades was performed. Finally, the GUT matrix and the FMEA method are the best results

The partial information decomposition (PID) framework is concerned with decomposing the information that a set of random variables has with respect to a target variable into three types of components: redundant, synergistic, and unique. Classical information theory alone does not provide a unique way to decompose information in this manner and additional assumptions have to be made. Inspired by Kolchinsky's recent proposal for measures of intersection information, we introduce three new measures based on well-known partial orders between communication channels and study some of their properties.

Inflammatory bowel disease (IBD), including Crohn’s Disease (CD) and Ulcerative Colitis (UC) are chronic multifactorial disorders which affect the gastrointestinal tract with variable extent. Despite extensive research, their etiology and exact pathogenesis are still unknown. Cell-free DNAs (cfDNAs) are defined as any DNA fragments which are free from origin cell and able to circulate into bloodstream with or without microvescicles. CfDNAs are now being increasingly studied in different human diseases, like cancer or inflammatory diseases. However, to date it is unclear how IBD etiology is linked to cfDNAs in plasma. Extrachromosomal circular DNA (eccDNA) are non-plasmidic, nuclear, circular and closed DNA molecules found in all eukaryotes tested. CfDNAs appear to play an important role in autoimmune diseases, inflammatory processes, and cancer; recently, interest has also grown in IBD, and their role in the pathogenesis of IBD has been suggested. We now suggest that eccDNAs also plays a role in IBD. In this review we have comprehensively collected available knowledge in literature regarding cfDNA, eccDNA, and structures involving them such as neutrophil extracellular traps and exosomes, and their role in IBD. Finally, we focused on old and novel potential molecular therapies and drug delivery systems, such as nanoparticles, for IBD treatment.

The main objective of this work is to study the effects of carbon nanotubes (CNT) on the strength and electrical properties of cement mortar. Molecular dynamic simulations (MDS) were carried out for the mechanical and electrical properties of the cementitious composite and the associated mechanisms. To model the atomic structure of the Calcium-Silicate-Hydrates (C-S-H) gel, tobermorite 11Å was chosen. Single-walled carbon nanotubes (SWCNTs) embedded in tobermorite structure were tested numerically. In particular, the effect of the concentration of CNT in cement paste was studied. An innovative experiment of electrical characterization of a cementitious composite of carbon nanotubes has been developed.

The Western ‘discovery’ of Japanese cinema in the 1950s prompted scholars to articulate essentialist visions understanding its singularities as a result of its isolation from the rest of the World and its close links to local aesthetic and philosophical traditions. Recent approaches however, have evidenced the limitations of this paradigm of ‘national cinema’. Higson (1989) opened a critical discussion on the existing consumption, text andproduction-based approaches to this concept. This article draws on Higson´s contribution and calls into question traditional theorising of Japanese film as a national cinema. Contradictions are illustrated by assessing the other side of the ‘discovery’ of Japanese cinema: certain gendaigeki works that succeeded at the domestic box office while jidaigeki burst into European film festivals. The Taiyōzoku and subsequent Mukokuseki Action created a new postwar iconography by adapting codes of representation from Hollywood youth and western films. This article does not attempt to deny the uniqueness of this film culture, but rather seeks to highlight the need to reformulate the paradigm of national cinema in the Japanese case, and illustrate the sense in which it was created from outside, failing to recognise its reach transnational intertextuality.

Background. Shoulder in CrossFit should have a balance between mobility and stability. Glenohumeral internal rotation deficit and posterior shoulder stiffness are risk factors for overhead shoulder injury. Objective. To determine the effectiveness of instrument assisted soft tissue mobilization and horizontal adduction stretch in CrossFit practitioners’ shoulders. Methods: Twenty-one regular CrossFitters were allocated to experimental (stretching with isometric contraction and instrument assisted soft tissue mobilization) or control group (instrument assisted soft tissue mobilization). Each session lasted 5 minutes, 2 days a week, over a period of 4 weeks. Shoulder internal rotation and horizontal adduction (digital inclinometer), and posterior shoulder stretch perception (Park scale) were evaluated. Shapiro-Wilk test was used to analyze the distribution of the sample. Parametric student's t-test was used to obtain the intragroup differences. The inter- and intra-rater differences were calculated using a repeated measures ANOVA. Results. Changes were found in the experimental group following intervention (p < 0.05), and when comparing baseline and follow-up assessments (p < .05) in all variables. Significant differences were found in the control group following intervention (p < 0.05), in right horizontal adduction and left internal rotation. When comparing perception of internal rotation and horizontal adduction in both groups in the three assessments significant differences were found. Conclusions. Instrument assisted soft tissue mobilization can improve shoulder horizontal adduction and internal rotation. An instrument-assisted soft tissue mobilization technique yields the same results alone as those achieved in combination with post-isometric stretch with shoulder adduction.

Configurable process models are frequently used to represent business workflows and other discrete event systems among different branches of large organizations: they unify commonalities shared by all branches and describe their differences, at the same time. The configuration of such models is usually done manually, which is challenging. On the one hand, when the number of configurable nodes in the configurable process model grows, the size of the search space increases exponentially. On the other hand, the person performing the configuration may lack the holistic perspective to make the right choice for all configurable nodes at the same time, since choices influence each other. Nowadays, information systems that support the execution of business processes create event data reflecting how processes are performed. In this article, we propose three strategies (based on exhaustive search, genetic algorithms, and greedy heuristic) that use event data to automatically derive a process model from a configurable process model that better represents the characteristics of the process in a specific branch. These strategies have been implemented in our proposed framework, and tested in both business-like event logs as recorded in a higher educational ERP system, and a real case scenario involving a set of Dutch municipalities.

This research aims to introduce a model, SectraBank, designed to mitigate cyber fraud attacks, specifically targeting SIM Swapping and Fake App schemes in mobile banking users. A quantitative methodology with an experimental design was meticulously employed to examine the rise of cyber fraud within mobile banking. The study involved a sample of 100 professionals with advanced knowledge in Information and Communication Technologies (ICTs). Surveys were utilized to measure awareness of threats and perceptions of security before and after the implementation of the proposed model. SectraBank leverages unique user identifiers such as fingerprint authentication and the International Mobile Equipment Identity (IMEI) number, in addition to geolocation and One Time Passwords (OTP) for validating electronic transactions in mobile banking. The effectiveness of the proposed model was notable, achieving a 96.1% efficacy rate in mitigating Fake App attacks and a 90.2% success rate in countering SIM Swapping attacks. These findings underscore the potential of SectraBank as a robust solution to enhance cybersecurity measures in the realm of mobile banking.

The growing interest related to the proposal of formal definition of a new geological period that has being called “Anthropocene” has introduced a buzzing dynamics in the scientific community, but its conduct is perhaps due to various interests involved in a discussion that has long surpassed the contours of the so-called “Geosciences”. Themes such as “Climate Change or Drift”, “Global Warming”, “Massive Extinction of Species” and “Loss of bio and geodiversity”, among others, are the wheel of a geomorphogenetic dynamics of anthropocentric origin, which leads the debate. But are the conditions for the formal establishment of a new morphosedimentary cycle following the Meghalayanian (Upper Holocene) Age? This work pursues a line of thought that seeks to answer these and other questions, based on the official position of the institutes that have the scientific competence for the formalization under consideration, and the formal criteria that should be considered for this purpose.

Microbial communities play a key role in sustainable agriculture. However, we still need more in-formation, to understand the complex response of the microbial community to long-term organic farming, which aims to reduce synthetic fertilizer and pesticide use in order to produce sustainably and improve soil quality. We have assessed the long-term effect of two organic cropping systems and a conventional system on the microbial soil community structure using high-throughput se-quencing analysis. We analyzed the link between these communities and changes in soil properties and crop yield. Results showed that the crop yield was similar among the three cropping systems. Soil properties, such as total organic carbon, nitrogen, ammonium, magnesium and boron, influ-enced changes in the bacterial community structure. A linear discriminant analysis effect size (LEfSe) showed different bacteria and fungi as key microorganism of each of the three different cropping systems, in addition, our results reflected that fungal community were more sensitive than bacteria to cropping system. This research provides an insight about changes occurred in soils, especially in microbial communities considering the effect of that changes in crop yield which were remained stable among the different cropping systems.

The cell’s capacity to integrate and respond to spatial information is a crucial feature of morphogenesis and development. The Planar Cell Polarity (PCP) pathway is a signaling mechanism, widely conserved across metazoans, providing spatial orientation along the plane of an epithelium in morphogenic processes ranging from insect wing patterning to mammalian cochleae. Although the core genes involved in the PCP pathway have been molecularly identified in the 1990s, the PCP signaling mechanism remains controversial. In this article I discuss the main players and previous models of PCP signaling reported in the literature, and propose a new model. According to it PCP is established through an homophobic signal by transmembrane protein Frizzled (Fz): 1) a Fz signal in one cell repeals Fz itself in the adjacent cell, thereby generating symmetry breaking; 2) the instructive PCP signal is conveyed through Fz interaction with atypical cadherin Flamingo (Fmi). More broadly, homophobic signaling may represent a novel mechanism for cell-cell signaling of spatial information through modulation of cell adhesion rather than canonical ligand-receptor binding.

The orchid genus Brachystele Schltr. comprises 20 species distributed from Mexico to Argentina; 10 are found in Brazil. Anatomical studies of Orchidoideae Lindl. have been scarce, and the anatomy and histochemistry of Brachystele are still largely unknown. We characterized the vegetative organs of B. guayanensis (Lindl.) Schltr. using standard anatomical and histochemical microtechniques. Brachystele guayanensis was observed to display the anatomical characters commonly found in the vegetative organs of representatives of the Orchidaceae and Orchidoideae (including a uniseriate epidermis, thin cuticle, amphistomatic leaves, anomocytic, diacytic and tetracytic stomata, a homogeneous mesophyll, collateral vascular bundles, rhizomes with pericyclic fibers, roots with velamen, uniseriate exodermis, endodermis and pericycle). Histochemical tests confirmed the presence of lignin, proteins, and alkaloids, the lipidic nature of the cuticle, starch grains stored in spiranthosomes in the roots, and the composition of the raphides. Alkaloids were observed in great abundance, especially in the roots, and may have potentially useful medicinal activities, as has been observed in groups phylogenetically related to Brachystele.

N-palmitoylethanolamine (PEA) is an endocannabinoid-like compound first encountered within lipid fractions of specific foods and has intrigued researchers since the 1950s due to its therapeutic effects. This study aims to explore the therapeutic promise held by PEA as an anti-inflammatory and immunomodulatory agent. Therapeutic impact of PEA reverberates across diverse physiological systems, as the central nervous system, gastrointestinal tract, vascular network, digestive and respiratory system. Additionally, it was effective in pain management, reduction of inflammation and immune responses. These attributes have fostered collaborations targeting conditions such as Alzheimer's disease, multiple sclerosis, cerebral ischemia, neuroinflammation, general inflammation, pain, coagulopathy, steatohepatitis, and acute lung injury. PEA operates both independently and in synergy with other compounds, like paracetamol, luteolin, and oxymetazoline. This efficacy stems from its interactions with pivotal targets including PPARα, PPAR-δ, PPAR-γ, CB1, CB2, GPR55, and TRPV1. Additionally, PEA exerts a direct influence on the inflammatory cascade, orchestrating precise adjustments in immune responses. Numerous animal studies have elucidated the inherent potential of PEA. Nevertheless, the imperative of reinforcing clinical investigation is evident. This review notably underscores the pivotal necessity for methodologically rigorous clinical trials to definitively establish the translational efficacy of PEA in ameliorating diverse inflammatory pathologies within the human milieu.

Different types of disasters, whether natural or human character, lead to the significant loss of human lives. In the latter case, the quick action of identification of corpses and human remains is mandatory. There are a variety of protocols to identify victims, however, genetics is one of the tools that allow an exact identification of the victim. However, several factors may interfere with this identification, from the biological samples’ degradation not allowing the analysis of nuclear information, to failure to dispose of biological samples from family members. Access to certain family members could be a determinant of the proper choice of genetic markers that allow the identification of the victim, or his/her inclusion in a given genetic maternal or paternal lineage. With the new advances in the genetic field, it is expected to allow soon the identification of victims from disasters only with his/her biological postmortem samples, being possible to draw a robot portrait and its most likely physical characteristics. In all cases, genetics is the only modern tool with universal character and can be used in essentially all biological samples, giving and identification of more or less accurate statistical character, depending on whether nuclear or lineage markers are used.

The relationship between perception of anxiety and quality of life in caregivers of children with autism was verified. To verify quality of life, the Short Form Healthy Survey Item was used; perception of anxiety was assessed using the Beck Anxiety Inventory. 80 caregivers of children with autism participated, with 68.7% of caregivers being mothers. Of the total number of caregivers, 68.8% had a severe level of anxiety. Regarding quality of life, they demonstrated greater impairment in Limitation due to physical aspects, Limitation due to emotional aspects, Vitality and Pain. Caregivers with severe anxiety levels had worse quality of life in the domains of pain (p = 0.012), social aspects (p =&lt; 0.001), limitation due to emotional aspects (p = 0.001) and mental health (p =&lt; 0.001). However, in the functional capacity domain, caregivers with a moderate level of anxiety had a better physical capacity score (p = 0.001). There was a negative correlation between the general anxiety score and the general physical (p = 0.029) and general emotional component of quality of life (p =&lt; 0.001). It was found that caregivers of children with ASD present losses related to psychological factors, quality of life and the lack of social support.

The main objective of this investigation was to study the effect of organizational competencies development practices on turnover intentions and whether affective commitment explains this relationship. Another of the study's objectives was to test whether these relationships vary ac-cording to the generation to which the participant belongs. The study sample consisted of 2123 participants working in Portuguese organizations. The results indicate that organizational com-petencies development practices (training, individualized support, and functional rotation) nega-tively and significantly affect turnover intentions and that affective commitment mediates this re-lationship. However, these relationships vary according to the participant's generation. For Gen-eration Y and Generation X, this mediating effect is found in all dimensions of organizational competencies development practices. For the baby boomer generation, there is only a mediating effect of affective commitment in the relationship between individualized support and turnover intentions. These results indicate that human resources should consider the generation to which the participant belongs when implementing competencies development practices.

Techniques and tools meant to aid fire management activities in the Cerrado, such as accurately determining fuel load and composition spatially and temporally, are pretty scarce. The need to have fuel information for more efficient management in a considerably heterogeneous, biodiverse, and fire-dependent environment makes a constant search for the improvement of the use of remote sensing techniques in determining fuel characteristics. This study presents the following objectives: (1) to assess the use of data from Landsat 8 OLI images to estimate the fine surface fuel load of the Cerrado during the dry season by adjusting multiple linear regression equations; (2) to estimate fuel load through Random Forest and k-Nearest Neighbor (k-NN) algorithms in comparison with re-gression analyses; and (3) to evaluate the importance of predictor variables from satellite images. Therefore, 64 sampling units were collected, and the pixel values associated with the field plots were extracted in a 3 x 3 pixel window surrounding the reference pixel. For the multiple linear regression analyses, the R² values ranged from 0.63 to 0.78, and the models fitted by the Random Forest al-gorithm ranged from 0.52 to 0.83, while those fitted by k-NN ranged from 0.30 to 0.68. Adopting the Random Forest algorithm resulted in improvements in the statistical metrics of evaluation of the fuel load estimates for Cerrado grassland relative to the multiple linear regression analyses.

Abstract: Building Information Modelling (BIM) methodology has been empowering the quality of the construction activity in all sectors: multidisciplinary designs development; construction planning and monitoring; building management and maintenance. A BIM environment aggre-gates several disciplines and different professional skillsets and in order to control and improve the quality of a BIM project, a BIM manager is required. The BIM manager has the responsibility to coordinate all tasks involved in a building design and associated activities usually workout over the project documents. This professional can access to the distinct discipline models, located in a shared platform, and request for amendments if inconsistencies are detected. The topic of the present study is illustrated with three building cases were distinct specific projects, disciplines and tasks were elaborated: collaboration between disciplines (architecture, structures and con-struction); structural analyses and reinforcement details; quantity take-off of materials and cost estimation; construction scheduling and simulation. Although there are still limitations in the implementation of BIM methodology in all sectors and stages, within the construction industry, BIM has been bringing an important improvement in the quality of a building design, reflected in the quality of the final product. The present study put in evidence the BIM manager role in pro-jects that aggregates several disciplines and experts, bringing an important contribution in the quality of a building design. BIM methodology is a current demand in the construction industry supported on advanced technology and in an adequate management of projects.

This paper investigates pseudo-polymorphism in 2-pyridylmethoxy derivatives of p-tert-butylcalix[4]arene (PyC4), p-tert-butyldihomooxa-calix[4]arenes (PyHOC4), and p-tert-butylhexahomotrioxacalix[3]arenes (PyHO3C3), presenting 11 crystal structures with 15 crystallographically independent molecules. The macrocycle of PyC4 is smaller and less flexible with respect to those of PyHOC4 and PyHO3C3 and in solution, the cone conformation of these three molecules exhibit different point symmetries: C4, Cs and C3, respectively. A correlation is observed between the macrocycle's structural rigidity and the number of pseudo-polymorphs formed. The more rigid PyC4 displays a higher number (6) of pseudo-polymorphs compared to PyHOC4 and PyHO3C3, which exhibit a smaller number of crystalline forms (3 and 2, respectively). The X-ray structures obtained show that the conformation of the macrorings is primarily influenced by the presence of an acetonitrile guest molecule within the cavity, with limited impact from crystal packing and intermolecular cocrystallized solvent molecules. Notably, both calix[4]arene derivatives produce host-guest complex with acetonitrile, while the most flexible and less aromatic PyHO3C3 do not give crystals with acetonitrile as guest. Intertwined 1D and 2D solvent channel networks were observed in the PyHOC4-hexane and in the PyHO3C3-H2O-MeOH crystal structures, respectively, while the other pseudopolymorphs of PyHOC4 and PyHO3C3 and all PyC4 crystal forms exhibit a closely packed crystal structures without open channels.

Fungal infections caused by Candida spp. are responsible for high hospital morbidity and mortality rates. Therefore, there is a continuous search for new antifungal medicines, particularly ones with anti-Candida activity. This review analyzed articles published between 2002 and 2023 considering the anti-Candida activity of chemical compounds identified or isolated in plants of the Anacardiaceae family. In addition, the in-silico prediction of the isolated compounds described was performed. The analysis of 35 studies showed that extracts, essential oils, and compounds from the anti-Candida activity were frequently determined in vitro using the minimum inhibitory concentration (MIC). The most commonly tested species were Candida albicans, C. tropicalis, C. parapsilosis, C. glabrata, C. krusei, and C. guilliermondii, respectively. Essential oils were the most used form (37% of the studies). The isolated compounds with antifungal effects include cardanol, estragole, trans-anethole, β-caryophyllene, myrcene, catechin-3-o-rhamnoside, β-sitosterol-3-O-glucoside, 24Z-isomasticadienolic acid, oleanolic acid, and oleanolic aldehyde. The in-silico evaluation of those isolated compounds revealed the compounds' drug-likeness and possible antifungal activity. However, some of them showed high toxicity. In conclusion, compounds from the Anacardiaceae family show promise for developing new therapeutic antifungal drugs, especially in combination with conventional antifungals.

Polyolefin fibre reinforced concrete (PFRC) has become an attractive alternative to steel for the reinforcement of concrete elements mainly due to its chemical stability and the residual strengths that can be reached with lower weights. The use of polyolefin fibres can meet the requirements in the standards, although the main constitutive relations are based on the experience with steel fibres. Therefore, the structural contributions of the fibres should be assessed by inverse analysis. In this study, the fibre dosage has been fixed at 6kg/m³ and both self-compacting concrete and conventional concrete have been used to compare the influence of the positioning of the fibres. An idealized homogeneous distribution of the fibres with such fibres crossing from side to side of the specimen has been added to self-compacting concrete. The experimental results of three-point bending tests on notched specimens have been reproduced by using the cohesive crack approach. Hence, the constitutive relations were found. The significance of this research relies on the verification of the formulations found to build the constitutive relations. Moreover, with these results it is possible to establish the higher threshold of the performance of PFRC and the difficulties of limiting the first unloading branch typical of fracture tests of PFRC.

Building Information Modelling (BIM) methodology have been optimizing the construction activity in all sectors: multidisciplinary designs development; construction planning and monitoring; building management and maintenance. A BIM environment aggregates several disciplines and different skillsets and in order to control and improve the quality of a BIM project, a BIM manager is required. The BIM manager has the responsibility to coordinate all tasks involved in a building design and associated activities usually workout over the project documents. The professional can access to various discipline models, located in a shared board, and request for amendments if inconsistencies are detected. The present study issue is illustrated with three building cases were distinct specific projects, disciplines and tasks were elaborated: collaboration between disciplines (architecture, structures and construction); structural analyses and reinforcement details; quantity take-off of materials and cost estimation; construction scheduling and simulation. Although there are limitations in the implementation of BIM methodology in all sectors and stages, within the construction industry, BIM have been bringing an important improvement in the quality of a building design, reflected in the quality of the final product. BIM methodology is a current demand in the construction industry supported on advanced technology and in an adequate management of projects, were the BIM manager has an important role.

Centropomus undecimalis (common snook, sergeant fish or robalo) and Centropomus parallelus (fat snook, smallscale fat snook, little snook or chucumite) have tropical and subtropical wide distribution from southern Florida (Gulf of Mexico) to southern Brazil (Rio Grande do Sul) waters, and due the value of their flesh, these species have been explored with predatory fishing, generating a deficiency for their conservation. Adequate conservation of this species depends on population genetic parameters. Thus, in this study, we used microsatellite markers to investigate the genetic variability and the genetic characterization of C. undecimalis and C. parallelus populations, identifying if the citations species are geographically connected, using 10 loci of microsatellites, bringing strategies of management, sustainability, and conservation for species citations, and providing genetic subsidies needed to be used in breeding programs for snooks. Microsatellite molecular genetic markers were efficient in the study of the genetic variability of the samples of C. parallelus and C. undecimalis, resulting in data on the genetic structuring of these populations, thus aiding in their management and conservation. The data presented may provide subsidies for future use in programs aimed at animal breeding of sea bass, establishing tools for use in fish farming. In addition, despite being two species that are not on the endangered list, we can observe that there are genetic differences between the studied populations of the same species.

Using straightforward and cost-effective methods, persimmon leaves were converted into a high-quality powder. This powder was applied as an adsorbent for the removal of Cu(II) and Cd(II) from aqueous solutions. Scanning electron microscopy (SEM) indicated the presence of particles with non-homogeneous sizes and rough texture. Elemental analysis and the EDX technique confirmed the presence of elements such as sulfur, phosphorus, nitrogen, and oxygen. The results of ¹³C nuclear magnetic resonance (¹³C-NMR), obtained through the cross-polarization technique, suggest the presence of groups containing sulfur and oxygen. Infrared spectroscopy (FTIR) indicated the existence of amine and hydroxyl groups. The material was used in solid-phase extraction of Cu(II) and Cd(II) in batch experiments, and its adsorption capacity was evaluated as a function of time, pH, and analyte concentration. Kinetic equilibrium was reached within 5 minutes, and the experimental data were fitted to the pseudo-second-order kinetic model. The optimum pH for adsorption of both metal species was observed to be around 5.0. The adsorption isotherms were adjusted using the modified Langmuir equation, and the maximum amount of metal species extracted from the solution was determined to be 0.213 mmol g^-1 for Cu(II) and 0.215 mmol g^-1 for Cd(II), with high linear correlation coefficients for both metals. The persimmon leaves are typically abundant during the growing season, and since they are seasonal, the Diospyros kaki L.f. tree undergoes the natural process of leaf abscission, ensuring the availability of leaves for application.

Brushless Synchronous Machines (BSM) are replacing conventional synchronous machines with static excitation in generation facilities due to the absence of sparking and lower maintenance. However, this excitation system makes challenging measuring electric parameters in the rotor. This fact highly difficult the detection of ground faults, which are the most common type of electrical fault in electric machines. In this paper, a ground fault detection method for BSM is proposed. It is based on an inductive AC/DC rotating current sensor installed in the shaft. In case of a ground fault in the rotating parts of the BSM, a fault current will flow through the rotor’s sensor, inducing voltage in its stator. Analyzing the frequency components of the induced voltage the detection of a ground fault in the rotating elements is possible. The ground faults detection method proposed covers the whole rotor and discern between DC and AC sides. To corroborate the detection method, experimental tests have been performed using a prototype of this sensor connected to laboratory synchronous machines achieving satisfactory results.

In this article, we give a brief review of the origin of the neutrino mass in some interesting non-linear supersymmetric models with R-symmetry. These models are able to address and solve the most important problems of the particle physics and provide mechanisms for neutrino mass generation and their mixing parameters in agreement with the current experimental data. Their prediction could be experimentally tested in the near future by collider experiments.

Members of the genus Armillaria are widespread forest pathogens against which effective protection has not yet been developed. Due to their longevity and the creation of large-scale cloning of Armillaria individuals, the use of mycoviruses as biocontrol agents (BCAs) against these pathogens could be an effective alternative. This work describes the screening of double-stranded RNA banding patterns as a first approach for potential virus discovery and the use of stranded total RNA-seq for viral detection and characterization in Armillaria spp. collected in the Czech Republic. A total of five single-stranded RNA viruses were detected in Armillaria ostoyae and A. cepistipes, including the first virus of the family Tymoviridae found infecting a member the genus Armillaria and four viruses belonging to the recently described virus group "ambiviruses" with circular ambisense genome organization. Both hammerhead (HHRz) and hairpin (HpRz) ribozymes were detected in all the ambiviricot sequences. Armillaria viruses were compared by phylogenetic analysis and confirmed their specific host by direct RT-PCR, which showed the occurrence of interspecies transmission.

Several methods have been tried to estimate air temperature using satellite imagery. In this paper, the results of two machine learning algorithms, Support Vector Machine and Random Forest, are compared with Multivariate Linear Regression, TVX and Ordinary kriging. Several geographic, remote sensing and time variables are used as predictors. The validation is carried out using four different statistics on a daily basis allowing the use of ANOVA to compare the results. The main conclusion is that Random Forest with residual kriging produces the best results (R$^2$=0.612 $\pm$ 0.019, NSE=0.578 $\pm$ 0.025, RMSE=1.068 $\pm$ 0.027, PBIAS=-0.172 $\pm$ 0.046), whereas TVX produces the least accurate results. The environmental conditions in the study area are not really suited to TVX, moreover this method only takes into account satellite data. On the other hand, regression methods (Support Vector Machine, Random Forest and Multivariate Linear Regression) use several parameters that are easily calculated from a Digital Elevation Model, adding very little difficulty to the use of satellite data alone. The most important variables in the Random Forest Model were satellite temperature, potential irradiation and cdayt, a cosine transformation of the julian day.

With the increment of the aging population in recent years, neurodegenerative diseases exert a major global disease burden, essentially as a result of the lack of treatments that can stop the disease progression. Alzheimer’s Disease (AD) is an example of a neurodegenerative disease, that affects millions of people globally, with no effective treatment. Natural compounds have emerged as a viable therapy to fill a huge gap in AD management, and in recent years, mostly fuelled by the Covid-19 pandemic, RNA-based therapeutics have become a hot topic in the treatment of several diseases. Treatments of neurodegenerative diseases face significant limitations due to the complex and interconnected pathways that lead to their hallmarks and, also due to the necessity to cross the blood–brain barrier. Nanotechnology has contributed to surpass this bottleneck in the treatment of AD, by promoting safe and enhanced drug delivery to the brain. In particular, exosome-like nanoparticles, a hybrid delivery system combining exosomes and liposomes' advantageous features, are demonstrating great potential in the treatment of central nervous system diseases.

Despite the numerous advances in target therapy for the treatment of colorectal cancer, aggressive colorectal cancer remains an incurable disease whose negative modulation of the immune system in the tumor microenvironment is still critical for improving the patient's prognosis. Extracellular vesicles (EVs) have received attention for their use as cell-membrane-camouflaged nanoparticles and drug delivery systems in nanomedicine derived by nearly all cell types for intercellular communication and regulation in the tumor microenvironment (TME). In this study, M1 Macrophage EVs (M1EVs) were used as nanocarriers of oxaliplatin (M1EV1) associated with retinoic acid (M1EV2) and Libidibia ferrea (M1EV3), or combined together with retinoic acid and Libidibia ferrea (M1EV4) to evaluate their antiproliferative and immunomodulatory potential on CT-26 and MC-38 colorectal cancer cell lines, as well as their capacity to prevent metastases in mouse models of colorectal cancer such as allographic and peritoneal. Tumors were evaluated by qRT-PCR and immunohistochemistry. The cell death profile and epithelial-mesenchymal transition process (EMT) were analyzed in vitro in colorectal cancer cell lines. Polarization of murine macrophages (RAW264.7 cells) was also carried out. M1EV2 and M1EV3 used alone or especially combined (M1EV4) downregulated the tumor progression by TME immunomodulation, leading to a decrease in primary tumor size and metastases in peritoneum, liver and lungs. STAT3, NF-kB and AKT were the major genes downregulated by systems of M1EVs. Tumor-associated macrophages (TAM) switched M2 phenotype (CD163) towards M1 (CD68) reducing levels of IL-10, TGF-β and CCL22. Furthermore, malignant cells showed overexpression of FADD, APAF-1, caspase-3, and E-cadherin, and decreased expression of MDR-1, survivin, vimentin, CXCR4, and PD-L1 after treatment with systems of M1EVs. The results obtained in this study provided evidence that EVs from M1 antitumor macrophages can transport drugs and increase their immunomodulatory and antitumor activity by stimulating activation or blockage of pathways involved in cell proliferation, migration, cell survival, and drug resistance processes.

Maghemite (γ-Fe2O3) is a mineral formed from magnetite oxidation at low temperatures, an intermediate metastable term of the magnetite to hematite oxidation and could be mixed with both. It has magnetic susceptibility similar to magnetite, crystal structure close to magnetite with which it forms a solid solution, while compositionally it equals hematite. Maghemite is thus easily misidentified as magnetite by X-ray diffraction and/or as hematite by spot chemical analysis in iron ore characterization routines. Nonstoichiometric magnetite could be quantified in samples of Brazilian soils and iron ores by the Rietveld method using a constrained refinement of the X-ray patterns. The results were confirmed by reflected light microscopy and Raman spectroscopy, thus qualitatively validating the method. X-ray diffraction with the refinement of the isomorphic substitution of Fe2+ by Fe3+ along the magnetite-maghemite solid solution could help to suitably characterize maghemite in iron ores, allowing for the evaluation of its ultimate influence on mineral processing, by affecting its surface and breakage properties.

(1) Background: Grapes and their associated by-products (as grape pomace, GP) stand out for their polyphenol content, which makes them a source of bioactive compounds with antioxidant capacity. The aim of this research was to determine if the inclusion of 50 g/kg of GP in the diet of hens could enrich egg with antioxidants and to study its effect on internal and external egg quality parameters. (2) Methods: A trial was conducted with two genetic lines of hens, which were fed either a control diet or a diet containing 50 g/kg of GP. Performance, internal and external egg quality, and egg yolk content of vitamins E and A, and gallic acid were determined; (3) Results: In eggs laid by hens fed GP diet, Haugh units and yolk colour score were enhanced, and eggshell became thinner, but without affecting the breaking strength. No dietary effect was observed on vitamin contents in yolk. Higher gallic acid content was observed in yolk of eggs laid by hens fed the GP diet, suggesting that some dietary phenolic compounds could be transferred to the eggs. Hen genetics influenced egg weight, albumen Haugh units, shell thickness and α- and γ-tocopherol concentration in yolks; (4) Conclusions: Dietary inclusion of GP improved the internal quality of eggs, enriching yolks with a phenolic compound, but reduced shell thickness.

Natural fibers have attracted increasing interest as an alternative to produce environmentally friendly and sustainable materials. Particularly, hemp fibers have revealed to be widely used in various industrial applications due to their extremely unique properties. However, hemp can generate a large amount of agro-waste, and results in an attractive source of biopolymers for the development of low-cost materials in alternative to the raw materials and conventional petroleum-based plastics. In addition, deep eutectic solvents (DESs), a new type of truly green solvents, have been tested to remove gums, lignin, and other non-cellulosic components from hemp fibers. Reusing these components dissolved into the DESs to fabricate new materials directly by electrospinning is a very attractive but still unexplored endeavor. Thus, this innovative research to venture new upcycling pathways is focused on the fabrication of composite nanofibers by electrospinning of a gel-based blend of Poly(vinyl alcohol) (PVA) and hemp agro-waste (HW) dissolved into choline chloride (ChCl) : Glycerol (1:2) and ChCl : Urea (1:2) DES mixtures. The results obtained revealed that the produced nanofibers displayed uniform appearance with diameters ranging from 257.72 ± 65.63 nm to 380.78 ± 133.98 nm. In addition, the mechanical properties of the electro-spun composite nanofibers produced from the gel-based blends of HW dissolved in DESs and PVA (HW-DESs_PVA) were found to be superior, resulting in an enhanced tensile strength and Young’s modulus. Furthermore, the incorporation of HW into the nanofibers was able to provide bioactive antioxidant and antibacterial properties. Overall, this study demonstrated a promising, more sustainable, and eco-friendly way to produce electrospun composite nanofibers using HW in a circular economy perspective.

The Convective Rainfall Rate from Cloud Physical Properties (CRPh) for Meteosat Second Generation Satellites is a day-only precipitation algorithm developed at the Spanish Meteorological Agency (AEMET) for EUMETSAT’ Satellite Application Facility in support to Nowcasting and Very Short Range Forecasting (NWC SAF). It is therefore mainly intended to provide input for monitoring and near-real-time forecasts for the next few hours. This paper critically discusses the theoretical basis of the algorithm with special emphasis in the empirical values and assumptions in the microphysics of precipitation and compares the performances of the CRPh with its antecessor, the Convective Rainfall Rate algorithm (CRR), using an object-based method. The analyses show that AEMET’s CRPh is physically consistent and that outperforms the CRR. The applicability of the algorithm for nowcasting and the challenges to evolve the product to an all-day algorithm are also presented.

The production of fuels and other industrial products from renewable sources has intensified the search for new substrates or for the expansion of the use of substrates already in use, as well as the search for microorganisms with different metabolic capacities. In the present work, we isolated and tested a yeast from the soil of sugarcane irrigated with vinasse, that is, with high mineral content and acidic pH. The strain of Meyerozyma caribbica URM 8365 was able to ferment glucose, but the use of xylose occurred when some oxygenation was provided. However, some fermentation of xylose to ethanol in oxygen limitation also occurs if glucose is present. This strain was able to produce ethanol from molasses substrate with 76% efficiency, showing its tolerance to possible inhibitors. High ethanol production efficiencies were also observed in acidic hydrolysates of each bagasse, sorghum, and cactus pear biomass. Mixtures of these substrates were tested and the best composition was found for the use of excess plant biomass in supplementation of primary substrates. It was also possible to verify the production of xylitol from xylose when the acetic acid concentration is reduced. Finally, the proposed metabolic model allowed calculating how much of the xylose carbon can be directed to the production of ethanol and/or xylitol in the presence of glucose. With this, it is possible to design an industrial plant that combines the production of ethanol and/or xylitol using combinations of primary substrates with hydrolysates of their biomass.

In 2015, the Self-Action Leadership Theory—a qualitative, nomological expansion of self-leadership theory rooted in atmospheric and astronomical metaphor aimed at expanding the personal freedom of individuals, organizations, and nations by bolstering the existential growth of individuals through a series of Maslow-esque stages of holistic, personal development. This article introduces an accompanying, practitioner-based Model of Self-Action Leadership (SAL) aimed at the implicit enhancement of a holistic range of administrative processes through explicit training, mentoring, and coaching in the model’s general and universally-applicable principles and practices. The SAL model produces an original construct of personal leadership practice that builds upon the extant self-leadership academic canon, which dates back to 1983 (Manz, 1983). It also provides an analogue to four of the five core processes of Project Management by positioning a self-action leader (an individual) as the ongoing “project” at hand. The SAL Model is rooted in action research and was developed through a variety of self-oriented, action research projects in conjunction with a comprehensive, qualitative, analytical autoethnographic study of a scholar’s life experiences.

Data creation is often the only way for researchers to produce basic geospatial information for the pursuit of more complex tasks and procedures such as those that lead to the production of new data for studies concerning river basins, slope morphodynamics, applied geomorphology and geology, urban and territorial planning, detailed studies, for example, in architecture and civil engineering, among others. This exercise results from a reflection where specific data processing tasks executed in Google Sketchup (Pro version, 2018) can be used in a context of interoperability with Geographical Information Systems (GIS) software. The focus is based on the production of contour lines and Digital Elevation Models (DEM) using an innovative sequence of tasks and procedures in both environments (GS and GIS). It starts in Google Sketchup (GS) graphic interface, with the selection of a satellite image referring to the study area—which can be anywhere on Earth's surface; subsequent processing steps lead to the production of elevation data at the selected scale and equidistance. This new data must be exported to GIS software in vector formats such as Autodesk Design Web format—DWG or Autodesk Drawing Exchange format—DXF. In this essay the option for the use of GIS Open Source Software (gvSIG and QGIS) was made. Correcting the original SHP by removing “data noise” that resulted from DXF file conversion permits the author to create new clean vector data in SHP format and, at a later stage, generate DEM data. This means that new elevation data becomes available, using simple but intuitive and interoperable procedures and techniques which confgures a costless work flow.

The circular economy (CE) has emerged as a viable alternative for tackling the problems caused by rising consumption, including solid waste (SW). The present study conducted a meta-analysis of research published between 2012 and 2022 on CE and solid waste management (SWM). A bibliometric analysis was used from the Web of Science (WoS) and Scopus databases. By studying the articles, we briefly discussed the connections between them and how one contributes to the evolution of the other. Some findings point to greater collaboration between Italy and Bolivia, followed by China and Malaysia. However, they move away from the traditional axes as the United States and Canada. In addition, it was found that the adoption of reuse and selective collection, in fact, allow the reduction of the volume of discarded materials. In this way, it was possible to conclude that a greater connection between CE and GRS makes it possible to optimize the useful life of landfills through the treatment of organic waste and recycling, to encourage waste picker cooperatives and selective collection programs, and to reduce the financial costs of the system as a whole, making it more durable and sustainable.

Most research on colostrum quality and colostrum management focuses on maternal IgG transfer to the newborn calf. However, in addition to being a source of antibodies, colostrum has other components that influence passive immune transfer, nutrition, gut maturation, and thermoregulation. In this review, the constituents in the bovine colostrum, as well as their variation, are explored and it is discussed the biological role of colostrum on the newborn calf. Protein is the nutrient in higher concentration and fat is the nutrient with the most variation. There is a pronounced amplitude in the total solids content of colostrum, but the average concentration does not vary much between studies (24.7%). Bovine colostrum major components can vary with several factors, such as the region, season, breed, dry period length, and nutritional aspects of the dam. Bioactive components, cells, and microbiome variability are less understood, besides IgG. Regardless, they play crucial distinct roles in the physiological development of the newborn. However, a multi-interactive effect between these components, cells, and microorganisms is more likely to occur. Recently researched components in colostrum like miRNA, nucleo(t)sides, the milk fat globule membrane, oligosaccharides, minor proteins, and the microbiome are examples of promising interest areas of study.

Putting value to ecosystem services is something that society still refuses or simply ignores because it is not aware of the benefits that ecosystems provide us. In fact, people should be aware that a good understanding of ecosystem services can lead to win-win situations. Being aware of the importance of preserving the ecosystem and attaching value to its services will enable the development of self-sustaining strategies and appropriate policies for better ecological governance. Decades of over exploitation of natural resources, introduction and spread of alien species and, also, climate change, forest fires among other threats, have fostered biodiversity loss. The European Union Biodiversity Strategy has as one of its main goals to stop biodiversity loss and the degradation of ecosystem services; if possible, to recover the most threatened and degraded ecosystems, based on 20 Actions divided into 6 Targets. The present work falls within the scope of Action 5 of Target 2 – Improve knowledge of ecosystems and their services in the EU. The specific focus of this study is the Site of Community importance “Dunas de Mira, Gândara and Gafanhas” (Portugal) and the assessment of its ecosystem services, in accordance with the methodology proposed by the MAES (Mapping and Assessment of Ecosystems and their Services) Working Group. The work currently under way, a small segment of which is presented here, aims to identify, map and, when possible, assign value to the ecosystem services. For this purpose, modern GIS technologies will be used. This approach was implemented using a combination of data and tasks, including the photo-interpretation of Sentinel 2 (COPERNICUS Program) satellite imagery. The data geoprocessing tasks and image segmentation were developed using QGIS software and IMPACT Toolbox software (developed by the Joint Research Center – JRC, of the European Union), respectively. The analysis of Land Use and Burned Areas maps for the SCI "Dunas de Mira, Gândara and Gafanhas" led us to conclude that Forests ecosystems, the most affected by the fire of October 2017, continue to have the greatest expression in the area under study even though they have lost more than 50% of the area, and their services were also the ones most affected by the fire.

The aim of this paper is to establish a valid procedure for better understanding all the phenomena associated with the high-speed machining of Glass Fibre Reinforced Plastic (GFRP) composites. Both rectangular and circular specimens were machined at high speeds (up to 50 m/min) in order to understand what occurred for all values of fiber orientation angles during machining operations. An innovative testing methodology was proposed and studied to investigate the phenomenon of burr formation and thus understand how to avoid it during machining operations. To this end, the forces arising during the machining process and the roughness of the resulting surface, were carefully studied and correlated with the cutting angle. Additionally, the cutting surface and chip morphology formed during cutting tests were examined using a high-speed camera. Close correlations are found between the variations of the cutting forces' signals and the trends of the roughness and the morphology of the machined surface.

The increasing availability of longitudinal data (repeated numerical observations of same units at different times) requires the development of flexible techniques to automatically detect common errors in such data. Besides obvious and easily identifiable cases, such as missing or out-of-range data, large longitudinal dataset often present problems not easily traceable by the techniques used for generic datasets. In particular, elusive and baffling problems are i) inversion of one or more values from one unit to another; ii) anomalous jumps in the series of values, iii) errors in the timing of the values due to a recalculation operated by the data providers to compensate previous errors. This work proposes a statistical-mathematical approach based on a system of indicators that is able to capture the complexity of the described problems by working at the formal level, regardless of the specific meaning of the data. The proposed approach identifies suspect erroneous data and is applicable in a variety of contexts. We implement this approach in a relevant database of European Higher Education institutions (ETER) by analyzing Total academic staff, that is one of the most important variables, used in empirical analysis as proxy of size and also considered by policy makers at European level.

The interest in random fiber lasers (RFLs), first demonstrated one decade ago, is still growing and their basic characteristics have been studied by several authors. RFLs are open systems that present instabilities in the intensity fluctuations due to the energy exchange among their non-orthogonal quasi-modes. In this work, we present a review of the recent investigations on the output characteristics of a continuous-wave erbium-doped RFL, with emphasis on the statistical behavior of the emitted intensity fluctuations. A progression from the Gaussian to Lévy and back to the Gaussian statistical regime was observed by increasing the excitation laser power from below to above the RFL threshold. By analyzing the RFL output intensity fluctuations, the probability density function of emission intensities was determined, and its correspondence with the experimental results was identified, enabling a clear demonstration of the analogy between the RFL phenomenon and the spin-glass phase transition. A replica-symmetry-breaking phase above the RFL threshold was characterized and the glassy behavior of the emitted light was established. We also discuss perspectives for future investigations on RFL systems.

The rationalization and modeling of an electric discharge in a fluid require the knowledge of electron swarm parameters. In this work, transport coefficients of alcohols, including methanol, ethanol, propanol, and butanol are reported. The electron energy distribution function, mean energy, reduced mobility, and diffusion coefficient, are calculated using the two-term expansion of the electron Boltzmann equation in the frame of BOLSIG+ and the Monte Carlo collision code METHES. For such, experimental and theoretical values of the electron-alcohol collision cross-section, covering a range of electron impact energy from 1 eV to 1000 eV, are employed. A temperature of 300K, reduced fields E/N between $1-10^4$ Td (1Td = $10^{-21}~\rm Vm^2$), and Plasma density of $10^{19}~\rm m^{-3}$ were used in simulations. The calculated coefficients are compared with data available from previous studies.

This study addresses the problem of accurately predicting azimuth and elevation angles of signals impinging on an antenna array employing Machine Learning (ML). Using the information obtained at a receiving system when a transmitter’s signal hits it, a Decision Tree (DT) model is trained to estimate azimuth and elevation angles simultaneously. Simulation results demonstrate the robustness of the proposed DT-based method, showcasing its ability to predict the Direction of Arrival (DOA) in diverse conditions beyond the ones present in the training dataset, i.e., the results display the model’s generalization capability. Additionally, the comparative analysis reveals that DT-based DOA estimation outperforms the state-of-the-art MUltiple SIgnal Classification (MUSIC) algorithm, establishing DTs as competitive alternatives for DOA estimation in signal reception systems.

Defensive behavior is a function of specific survival circuits, the “aversive brain system”, that are thought to be conserved across vertebrates, and involve threat detection and the organization of defensive responses to reduce or eliminate threat. In mammals, these circuits involve amygdalar and hypothalamic subnuclei and midbrain circuits. The increased interest in teleost fishes as model organisms in neuroscience created a demand to understand which brain circuits are involved in defensive behavior. Telencephalic and habenular circuits represent a “forebrain circuit” for threat processing and organization of responses, being important to mounting appropriate coping responses. Specific hypothalamic circuits organize neuroendocrine and neurovegetative outputs, but are the less well-studied in fish. A “midbrain circuit” is represented by projections to interneurons in the optic tectum which mediate fast escape responses via projections to the central gray and/or the brainstem escape network. Threatening stimuli (especially visual stimuli) can bypass the “high road” and directly activate this system, initiating escape responses. Increased attention to these circuits in an evolutionary framework is still needed.

Body-Esteem Scale is an assessment tool for adolescents and adults that evaluate three dimensions of self-evaluations of one’s body. Body-Esteem Scale has been translated and validated in some countries since America down to Europe. Lack of translation and reliability evidence in Portugal was detected. This study aimed to translate and test the validity and reliability of the Body Esteem Scale for Adolescents and Adults (BESAA) in students in the context of Portuguese higher educa-tion. A total of 173 students (60.7% are female) with a mean age of 19.7 (standard deviation = 2.2) years participated. Categorical Principal Component Analysis was used to assess the underlying dimensions of BESAA. Construct validity was evaluated through correlation with the Appearance Schemas Inventory – Revised and a three-factor model (“Appearance”, ‘‘Weight’’ and “Attribu-tion’’) was established. Confirmatory factor analysis was performed to verify the construct validity of the instrument. Items that had factor weights (λ)<.40 were removed, as well as those that were considered redundant by the modification indices estimated by the Lagrange Multipliers (LM) method (LM>11, p<.001). We observed high correlations between theoretically similar factors, and low correlations between different factors. The Portuguese BESAA showed adequate validity and reliability.

In the last decade, probably in response to global changes and environmental crisis, the use of the term “social-ecological system” (SES) in the scientific literature has been growing. This is certainly a sign of the recognition of the need and importance of transdisciplinary research. Here, we explore whether the use of the term is a buzzword, or it actually represents a key concept toward the integration of social and ecological research. We compiled a data base of publications (N = 1289) that mentioned SES in title, keywords and abstract. Subsequently, we analyzed: authors affiliations, type of work (conceptual, empirical, review), study site, prevailing human use, temporal and spatial scales of analysis, kind of variables analyzed (socioeconomic, biophysical), and the method/s used to integrate them. We detected four time spans in the use of the term (1975–1997, 1998–2006, 2007–2012, 2013–2016). Our results suggest that SES is a widely invoked concept to study the interface between social and ecological systems. Most works show some common elements such as the analysis of resilience, ecosystem services, sustainability, governance and adaptive management. However, the majority of studies does not study SES as a whole, integrating both social and ecological variables and their feedback loops. We consider that SES is still a concept in construction in order to build a necessary framework to integrate social and ecological sciences. For a robust evolution we recommend to focus on 1. a conscious, discussed and agreed effort of scientists to conduct transdisciplinary research needed to study SES; 2. developing methodological tools for the true integration of social and ecological data.

Rising consumer demand for more safety, healthy and fresh-like food has given new concepts for food packaging. Besides, the growing concern with environmental issues has increased the search for materials from non-petroleum sources and biodegradable ones. Thus, active films based on biopolymers loaded with natural active compounds have potential to be used as food packaging. However, there are a lot of lipophilic active compounds that are a problem to incorporate in hydrophilic matrices, such as polysaccharides and proteins. One way to overcome these challenges is adding these compounds encapsulated in O/W emulsions. The incorporation of emulsion in biopolymeric matrix has influence in the film properties, such as mechanical, barrier, optical, among other. In this way, this review aims to point out the main characteristics of the emulsions systems encapsulating active compounds and its influence in the film properties and to present and discus critically the recent advances in the area.

Background/aim: Sexual harassment has become a serious social and public health problem in adolescence, causing adverse effects on mental health. Nevertheless, some behaviours arise that, due to their characteristics, might be misinterpreted as sexual harassment. A field study, a survey with a non-probabilistic accidental sampling, was designed in order to estimate the prevalence of sexual harassment victimization in the Spanish adolescent population, as well as to quantify the harms. Method: 1028 Spanish adolescents, 54.3% females and 45.7% males, aged 13-17 years (M = 15.21, SD = 1.03), responded to a diagnostic measure of sexual harassment victimization and an inventory measure of internalizing and externalizing Mental Health Problems (MHPs). Results: The results showed a significant prevalence of diagnosed sexual harassment victimization of school-aged adolescents, 24.1%, 95% [.215, 267], with adverse effects on internalizing and externalizing MHPs. As for the internalizing MHPs, the results showed moderate adverse effects on depression, anxiety, somatic burns, posttraumatic symptoms, and obsessive-compulsive symptoms; and mild adverse effects on social anxiety. With regard to externalizing MHPs, the results revealed moderate adverse effects on hyperactivity-impulsivity, anger control and antisocial behaviour; and mild adverse effects on attention problems, aggression and defiant behaviour. In addition, it was corroborated that sexual harassment victimization affects adolescent females to a greater extent, with the effect being significantly greater in internalizing than in externalizing MHPs. Conclusions: The results obtained are discussed and future lines of research and intervention are proposed to promote the implementation of prevention and intervention programs that address this phenomenon and, in turn, improve the physical, psychological, and social well-being of adolescents.

Companies have been increasing the amount of data that they collect from their systems and processes, considering the decrease in the cost of memory and storage technologies in recent years. The emergence of technologies such as Big Data, Cloud Computing, E-Science, and the growing complexity of information systems made evident that traceability and provenance are promising approaches. Provenance has been successfully used in complex domains, like health sciences, chemical industries, and scientific computing, considering that these areas require a comprehensive semantic traceability mechanism. Based on these, we investigate the use of provenance in the context of Software Process (SP) and introduce a novel approach based on provenance concepts to model and represent SP data. It addresses SP provenance data capturing, storing, new information inferencing and visualization. The main contribution of our approach is PROV-SwProcess, a provenance model to deal with the specificities of SP and its ability in supporting process managers to deal with vast amounts of execution data during the process analysis and data-driven decision-making. A set of analysis possibilities were derived from this model, using SP goals and questions. A case study was conducted in collaboration with a software development company to instantiate the PROV-SwProcess model (using the proposed approach) with real-word process data. This study showed that 87.5% of the analysis possibilities using real data was correct and can assist in decision-making, while 62.5% of them are not possible to be performed by the process manager using his currently dashboard or process management tool.

Product Development Process is widely known among industry and automobile companies. With the advance of technology and the need to improve product efficiency, many companies have been applying Lean Thinking principles. Their benefits lead those companies to implement their concepts and tools, like Value Stream Design in Indirect Areas, Obeya, Just-in-time (JIT) which is based on the production control system developed and implemented by Toyota. This article describes the case study of the implementation of Lean Product &amp; Process Development (LPPD) on the current Product Development Process (PDP) in an automotive company. The PDP was created by the organization and adapted from Advanced Product Quality Planning (APQP). The main findings were a Value Stream Design model of an improved PDP as a useful and successfully contribution for the company. These improvements reduced the product development lead time from 700 days to 369 days. The process efficiency increased from 68% to 85%. The communication and transparency between the cross-functional team (CFT) was improved and show promise for achieving a successful launch of new products.

Innovative tissue engineering biomimetic hydrogels based on hydrophilic polymers have been investigated for their physical and mechanical properties. 5% to 25% by volume loading PHEMA-nanosilica glassy hybrid samples were equilibrated at 37°C in aqueous physiological isotonic and hypotonic saline solutions (0.15 and 0.05 M NaCl) simulating two limiting possible compositions of physiological extracellular fluids. The glassy and hydrated hybrid materials were characterized both for dynamo-mechanical properties and equilibrium absorptions in the two physiological-like aqueous solutions. Mechanical and the morphological modifications occurring in the samples have been described. The 5% volume nanosilica loading hybrid nanocomposite composition showed mechanical characteristics in the dry and hydrated states that were comparable to those of cortical bone and articular cartilage, respectively, and then chosen for further sorption kinetics characterization. Sorption and swelling kinetics were monitored up to equilibrium. Changes in water activities and osmotic pressures in the water-hybrid systems equilibrated at the two limiting solute molarities of the physiological solutions have been related to the observed anomalous sorption modes using the Flory-Huggins interaction parameter approach. The bulk modulus of the dry and glassy PHEMA-5% nanosilica hybrid at 37°C has been observed to be comparable with the values of the osmotic pressures generated from the sorption of isotonic and hypotonic solutions. The anomalous sorption modes and swelling rates are coherent with the difference between osmotic swelling pressures and hybrid glassy nano-composite bulk modulus: the lower the differences the higher the swelling rate and equilibrium solution uptakes. Bone tissue engineering benefits of use of tuneable biomimetic scaffold biomaterials that can be “designed” to act as biocompatible and biomechanically active hybrid interfaces are discussed.

The partial information decomposition (PID) framework is concerned with decomposing the information that a set of (two or more) random variables (the sources) has about another variable (the target) into three types of information: unique, redundant, and synergistic. Classical information theory alone does not provide a unique way to decompose information in this manner and additional assumptions have to be made. One often overlooked way to do this decomposition is using a so-called measure of union information – which quantifies the information that is present in at least one of the sources – from which a synergy measure stems. In this paper, we introduce a new measure of union information based on adopting a communication channel perspective, compare it with existing measures, and study some of its properties. We also include a comprehensive critical review of characterizations of union information and synergy measures that have been proposed in the literature.

In the last decade several projects have been developed for the digitization and semantization of cultural heritage data. They were developed to preserve and maintain this heritage, but bringing it closer to all types of users and allowing access to this information to other sectors such as tourism, education, etc. In these developments, web technologies are combined, along with the use of knowledge graphs and interactive visualisation tools. Although remarkably interesting projects have been developed, in those projects, the data visualization tools are usually focused on the project context. This makes it difficult to reuse these jobs. Additionally, there are peculiarities of cultural heritage data considered with little depth, such as uncertainty, spatial and temporal granularity, as well as other aspects, such as relationships between data. In this article, these problems are described and based on other works such as VUMO or VISO, the design of an ontology that formalizes how to visualise this information is proposed, considering these problems. In addition, the development of a platform that allows the visualisation of this information through a web application and its evaluation of its use in projects such as SILKNOW, or Arxiu Valencià del Disseny is exposed

Dipteryx spp. is an important species in reforestation in the Amazon. The objective of this study is to characterize and compare the relationships between dendrometric variables in Dipteryx spp. stands in the Western Amazon by fitting linear regression equations for total height and crown diameter. Six forest stands were evaluated in three municipalities. Dendrometric variables collected included diameter at 1.3 m height (dbh), total height (ht) and crown diameter (dc). Simple and multiple linear regression equations were fitted to characterize the relationships between ht and dc. The total aboveground biomass of Dipteryx spp. trees and the carbon stock of the stands were estimated. The general equations showed higher R² values, exceeding 0.7. The general equations for estimating ht and dc were significant for all coefficients. The trees averaged 22 t/ha of aboveground biomass in the stands. There was a variation in carbon sequestration potential among stands, ranging from 5.12 to 88.91 t CO2.ha-1. Single-input equations using dbh as an independent variable are recommended for estimating dc and ht for individual Dipteryx spp. stands. Stands in the Western Amazon play a significant role in carbon sequestration and accumulation. Trees can sequester an average of 4.8 tons of CO2 per year.

This paper seeks to optimize the mechanical and durability properties of ultra-high performance concrete (UHPC). To meet this objective, concrete specimens were manufactured by using 1,100 kg/m3 of binder, water/binder ratio 0.20, silica sand and last generation of superplasticizer. Silica fume, metakaolin and two types of nano silica were used for improving the performances of the concrete. Additional mixtures included 13mm long OL steel fibers. Compressive strength, electrical resistivity, mercury intrusion porosimetry tests and differential and thermogravimetric thermal analysis were carried out. The binary combination of nano silica and metakaolin, and the ternary combination of nano silica with metakaolin and silica fume, led to the best performances of the UHPC, both mechanical and durable performances.

The synthesis of four samples of new polyurethanes was evaluated by changing the ratio of the diol monomers used, poly(propylene glycol) (PPG) and D-isosorbide, in the presence of aliphatic isocyanates such as the isophorone diisocyanate (IPDI) and 4,4′-methylenebis(cyclohexyl isocyanate) (HMDI). The thermal properties of the four polymers obtained were determined by DSC, exhibiting Tg values in the range 55-70 ºC, and their molecular structure characterized by FTIR, 1H and 13C NMR spectroscopies. The diffusion coefficients of these polymers in solution were measured by the Pulse Gradient Spin Echo (PGSE) NMR method, enabling the calculation of the corresponding hydrodynamic radii in diluted solution (1.62–2.65 nm). The molecular weights were determined by GPC/SEC and compared with the values determined by quantitative 13C NMR analysis. Finally, the biocompatibility of the polyurethanes was assessed using the HaCaT keratinocyte cell line by the MTT reduction assay method showing values superior to 70% cell viability.

Introduction: Individuals with gout are at higher risk of developing chronic conditions, such as diabetes, chronic kidney disease (CKD), and cardiovascular diseases. In this study, the association between urate-lowering therapy (ULT) use and the prevalence of these conditions was evaluated. Methods: This observational, cross-sectional pharmacoepidemiologic study used the 2013-2018 biannual cycles of the National Health and Nutrition Examination Survey. The inclusion criteria were adults 30 years of age and older with a diagnosis of gout. The association between ULT treatment status and dyslipidemia, coronary heart disease, heart failure, hypertension, and chronic kidney disease was evaluated, as well as associations with select clinical laboratory biomarkers. Results: Use of ULT was 28.9% (95%CI 24.3%-33.9%). There was no significant association between ULT use and the prevalence of heart failure, coronary heart disease, hypertension, or dyslipidemia (p>0.05). Those on ULT had a lower mean eGFR compared to those not on treatment (68.03 versus 74.74 mL/min/1.73m², p=0.014). LDL- and HDL- and total cholesterol were significantly lower among those receiving ULT treatment (p<0.05). Conclusion: ULT use continues to be low among those with gout. Those on ULT were more likely to be diagnosed with CKD, college graduates and above, older males, and obese. Clinical guidelines conditionally recommend ULTs in co-morbid kidney disease; while our results may reflect guidelines recommendation for ULT use in CKD patients, worsening kidney function while taking ULT is unlikely. Further research is necessary to determine the long-term impact of ULTs on kidney function and cardiovascular biomarkers.

This article addresses the problem of formation control of a quadrotor and one (or more) marine vehicles operating at the surface of the water with the end goal of encircling the boundary of a chemical spill, enabling such vehicles to carry and release chemical dispersants used during ocean cleanup missions to break-up oil molecules. Firstly, the mathematical models of the Medusa class of marine robots and quadrotor aircrafts are introduced, followed by the design of single vehicle motion controllers that allow these vehicles to follow a parameterized path individually using Lyapunov based techniques. At a second stage, a distributed controller using event triggered communications is introduced, enabling the vehicles to perform cooperative path following missions according to a pre-defined geometric formation. In the next step, a real time path planning algorithm is developed that makes use of a camera sensor, installed on-board the quadrotor. This sensor enables the detection in the image of which pixels encode parts of a chemical spill boundary and use them to generate and update in real time a set of smooth B-spline based paths for all the vehicles to follow cooperatively. The performance of the complete system is evaluated by resorting to 3-D simulation software, making it possible to simulate visually a chemical spill. Results from real water trials are also provided for parts of the system, where two Medusa vehicles are required to perform a static lawn-mowing path following mission cooperatively at the surface of the water.

The combined effects of the thermal processing (i.e., sterilisation treatment) and the prior frozen storage time (3 or 6 months at –18 ºC) on the quality loss in canned Atlantic horse mackerel (Trachurus trachurus) were determined. Thus, the sterilisation step led to a remarkable (p&lt;0.05) formation in canned fish muscle of fluorescent compounds, free fatty acids (FFAs) and trimethylamine and to an increase of the L* and b* colour parameters; meantime, a decrease (p&lt;0.05) of the total ω3 FA/total ω6 FA ratio and the a* colour value were detected. The prior frozen storage period led to an increased (p&lt;0.05) lipid oxidation (peroxide, thiobarbituric acid reactive substance and fluorescent compound formation) and hydrolysis (FFA formation) development and to increased L* and b* colour values in the corresponding canned samples; additionally, a lower (p&lt;0.05) polyene index and phospholipid content were observed in canned fish previously subjected to frozen storage. In most indices, physico-chemical changes related to quality loss were found higher if the previous storage period was increased. According to the marked effects of the sterilisation step and the prior frozen storage period, optimisation of such processing conditions is recommended to maximise the quality of canned horse mackerel.

In the southeastern coast of Brazil, the bays of Ilha Grande and Sepetiba are linked by the Ilha Grande Channel, where remarkably vigorous currents have been consistently observed. The sheer intensity of these currents defies a simple explanation through tidal forcing alone, prompting researchers to delve into potential influences such as basin resonance and the baroclinic effect. This study aims to elucidate the role of remote meteorological effects within this complex hydrodynamic system. A numerical approach with a coastal model nested within an ocean model was employed, enabling an in-depth examination of the intricate interplay between meteorological and tidal forcings. The study revealed a significant finding: the lag in signal propagation plays a pivotal role in determining how these signals impact the dynamics of the bays. The astronomical signal exhibits a minimal lag along the coast (1 minute), and leads to water level differences between the sea and the coastline, resulting in the generation of tidal currents at the bay entrances. On the other hand, the remote meteorological signal, with a stronger signal lag along the coast (4.92 hours), leads to the creation of water level difference between the bay’s entrances, inducing significant fluxes along the narrow Ilha Grande Channel.

Size effect on plain concrete specimens is well known and can be correctly captured when performing numerical simulations by using a well characterised softening function, but in the case of fibre reinforced concrete this is not directly applicable, since an only diagram cannot capture the material behaviour on elements with different size due to dependence of the orientation factor of the fibres with the size of the specimen. In previous works, the use of a trilinear softening diagram proved to be very convenient for reproducing fracture of polyolefin fibre reinforced concrete elements, but only if it is previously adapted for each specimen size. In this work, a predictive methodology is used to reproduce fracture of polyolefin fibre reinforced concrete specimens of different sizes under three-point bending. Fracture is reproduced by means of a well known embedded cohesive model, with a trilinear softening function that is defined specifically for each specimen size. The fundamental points of these softening functions are defined a priori by using empirical expressions proposed in past works, based on an extensive experimental background. Therefore, the numerical results are obtained in a predictive manner, and then compared with a previous experimental campaign, showing that this approach properly captures the size effect, although some values of the fundamental points in the trilinear diagram could be defined more accurately.

The fermentation of syngas is an attractive technology that can be integrated with gasification of lignocellulosic biomass. The coupling of these two technologies allows for treating a great variety of raw materials. Lignin usually hinders microbial fermentations; thus, the thermal decomposition of the whole material into small molecules allows for the production of fuels and other types of molecules using syngas as substrate, a process performed at mild conditions. Syngas contains mainly hydrogen, carbon monoxide and carbon dioxide in varying proportions. These gases have a low volumetric energy density, resulting more interesting its conversion into higher energy density molecules. Syngas can be transformed by microorganisms, thus avoiding the use of expensive catalysts, which may be subject to poisoning. However, the fermentation is not free of suffering from inhibitory problems. The presence of trace components in syngas may cause a decrease in fermentation yields or cause a complete cessation of bacteria growth. The presence of tar and hydrogen cyanide are just examples of this fermentation's challenges. Syngas cleaning impairs significant restrictions in technology deployment. The technology may seem promising, but it is still far from large-scale application due to several aspects that still need to find a practical solution.

Purpose: This research compared the dissociated phoria at near and distance fixation in free space using three techniques: the Howell test, alternate Cover test, and Thorington test. Methods: 220 healthy Mexican children (age 5.06-17.11) participated in this study. Phorias were quantified at both distances using each test, from the least to the most disruptive. The stereopsis degree and near point of convergence (break/recovery) were analyzed to understand their role on the visual system's sensorimotor balance. Results: For the exophoria/esophoria at near, the alternate Cover and Thorington tests showed similar values. The exophoria at distance, was similar with the alternate Cover and Howell tests, while esophoria, with the alternate Cover and Thorington tests. The break value and near exophoria relates to each other and affect the stereopsis degree, whereas age is associated with the stereopsis degree and break value. Conclusions: The analysis revealed that alternate Cover and Thorington tests can substitute one another, but not with the Howell test. The test's specific dissociation method may explain these results. Analyzing the binocular visual system provides information about its sensorimotor balance and fragility when faced to the technique’s degree of dissociation.