Arboviruses such as yellow fever virus (YFV), dengue virus (DENV), and chikungunya virus (CHIKV) presenting wide global dissemination and the pathogenic profile developed in infected individuals, which develop from nonspecific clinical conditions to severe forms, characterized by the promotion of significant lesions in different organs of the harborer, culminating in multiple organ dysfunction. To characterize, quantify, and compare the patterns of histopathological alterations in human liver samples from patients with yellow fever (YF), dengue fever (DF), and chikungunya fever (CF). Analytical cross-sectional study by histopathological analysis with 70 samples of liver patients, collected from 2000 to 2017, with confirmed laboratory diagnosis who died due to infection and complications by the YF, DF, and CF. Of the histopathological findings in human liver samples there was a significant difference between the control and infection groups, with a predominance of alterations in the midzonal area of the three cases analyzed, among the arboviruses studied, the hepatic involvement in cases of YF showed greater intensity of histopathological changes. Among the alterations evaluated, cell swelling, microvesicular steatosis and apoptosis were classified as degree of tissue damage from severe to very severe. The pathological abnormalities associated with infection by YFV, DENV, and CHIKV showed predominance of changes in the midzonal area. We also noted that in among of the arboviruses studied, liver involvement in cases of YFV infection was more intense.

Yellow fever (YF) is a pansystemic disease caused by the yellow fever virus (YFV), the prototype species of the family Flaviviridae and genus Flavivirus, and has a highly complex host-pathogen relationship, in which endothelial dysfunction reflects viral disease tropism. In this study, the in situ endothelial response was evaluated. Liver tissue samples were collected from 21 YFV-positive patients who died due to the disease and five flavivirus-negative controls who died of other causes and whose hepatic parenchyma architecture was preserved. Immunohistochemical analysis of tissues in the hepatic parenchyma of YF cases showed significantly higher expression of E-selectin, P-selectin, intercellular adhesion molecule-1, vascular cell adhesion molecule-1, and very late antigen-4 in YFV-positive cases than in flavivirus-negative controls. These results indicate that endothelium activation aggravates the inflammatory response by inducing the expression of adhesion molecules that contribute to the rolling, recruitment, migration, and construction of the inflammatory process in the hepatic parenchyma in fatal YF cases.

Precision medicine approaches often relies on complex and integrative analysis of multiple biomarkers from “omics” data to generate insights that can help either diagnostics, prognostics or therapeutical decisions. Such insights are often made using Machine learning (ML) models that make sample classification for a particular phenotype (yes/no). Building such models is a challenge and time-consuming, requiring advanced coding skills and mathematical modelling expertise. Artificial intelligence (AI) is a methodological solution that has the potential to facilitate, optimize and scale model development. In this work, we developed an AI-based, user-friendly and code-free platform (https://digitalphenomics.com) that fully automates the development of predictive models from quantitative “omics” data. Here, we show the application of this tool with the development of cancer survival prognostics models using real-life data from breast, lung and renal cancer transcriptomes. We report and compare their sensitivity, specificity, accuracy and Receiver Operating Characteristic (ROC) curve Area Under the Curve (AUC). Further, we report the associated sets of genes (biomarkers) and their expression pattern that are predictive of cancer survival. Moreover, we made our models available as online tools to generate prognostic predictions based on the gene expression of the biomarkers. In conclusion, we demonstrated that our tool is a robust user-friendly solution to develop bespoke predictive tools from “omics” data which facilitate precision medicine introduction to the point-of-care.

The literature is scarce in the evaluation of Behçet’s disease (BD) among individuals during the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection. Then, an epidemiological study was conducted using the data from 46 hospitalized patients with BD and coronavirus disease (COVID)-19 representing a prevalence of 2,11 patients per 100,000 inhabitants. From the study sample, 58.7% (27 patients) were female, and 67.4% (31 patients) were White. The main symptoms were fever (40; 87.0%), cough (38; 82.6%), dyspnea (35; 76.1%), and peripheral saturation below 95% (35%, 76.1%). The need for intensive care unit support occurred for 39.1% (18) patients. Also, 21.7% (10) patients needed invasive ventilatory support and 47.8% (22) needed non-invasive ventilatory support. A total of 73.9% (34) of patients lived, and 26.1% (12) of patients died. Only the presence of respiratory discomfort [37.9% vs. 5.9%] was more common among those who died. Patients with BD were not at an increased risk of worse COVID-19 outcomes in Brazil.

The hotel sector generates related environmental aspects from its construction process to the operation of its activities, products and services. In this way, corporate environmental management becomes directly linked, since it provides an adequate management of its resources, thus minimizing impacts. Thus, this research aims to carry out a socioeconomic and environmental diagnosis of the hotel sector in the municipality of Mossoró-RN. The study was classified in an exploratory, descriptive and explanatory way, with a qualitative-quantitative approach that is based on bibliographic, documentary and field research, carried out in 10 lodging facilities, through the application of questionnaires, on general aspects, initial environmental assessment and environmental aspects, and the data obtained were treated in Microsoft Excel software with the objective of creating a model and demonstrating results on the sustainable level of each establishment in question. The profile of the lodging facilities analyzed is characterized by 50% having from 10 to 30 rooms, 80% having between 10 and 30 employees, 80% being micro-enterprises, with 50% in an area of 750 m² to 2250 m² and 80% operating for more than 10 years. Point out a relevant result on the impacts of companies. The projects analyzed were built without any complaint for environmental crime and without negative impacts on the local population. Actions to reduce consumption were also observed, especially for the rationalization of water and energy. To this end, it points out that the adoption of the Environmental Management System (EMS) as a differential in the management of aspects and impacts of the hotel sector.

The gold nanoparticle (AuNP) was synthesized using the well-known Turkevich method. This article explains didactic step-by-step of the synthesis, showing pictures of the entire process, including a well-explained mechanism and characterization study. The synthesis includes the reduction of NaAuCl4 using sodium citrate in high temperature (around 90 ⁰C). The two main mechanisms used to explain the AuNP synthesis via Turkevich method were explained. The first mechanism considerate that a nanowire intermediary and the other proposed that aggregate intermediates are not formed at any time during the synthesis. The materials (NaAuCl4 and AuNP) were characterized by UV-Vis, SEM, AFM, XRD and DLS. The UV-Vis exhibit an absorption maximum in 521 nm because the surface plasmon resonance (SPR) absorption band of AuNP. The SEM images of NaAuCl4 presents crystals with cubic shapes, while the AuNP presents average particle size of about 16-25 nm and particles that appear mainly spherical. To confirm the particles shapes, the AFM was conducted and it was possible to observe clearly the individual spherical nanoparticles. The XRD of AuNP showed the four main characteristic peaks for silver corresponding to (111), (200), (220) and (311) planes, confirming the cubic (FCC) silver. The DLS presented the average particle size of 3.3 ± 0.9 nm and the polydispersity index (PDI) of 0.574. In summary, the AuNP was synthesized using a simple and fast method. The result was a spherical and ultrasmall particle, that can be used is several applications.

Necroptosis is a regulated form of cell death implicated in several pathological conditions, in-cluding viral infections. In this study, we investigated the expression and correlation of necroptosis markers, MLKL, RIP1 and RIP3, in human liver tissue from fatal cases of yellow fever (YF) using immunohistochemistry (IHC). Liver samples were obtained from 21 YF-positive individuals and five flavivirus-negative controls with preserved liver parenchymal architecture. The cases un-derwent histopathological analysis, followed by tissue immunostaining with the immuno-histochemical method of streptavidin-biotin peroxidase. Using the in situ method, we evaluated the centrilobular (Z3), midzonal (Z2), periportal zone and portal tract (PT) zones of human liver parenchyma with markers for necroptosis, RIPK1, RIPK3 and MLKL. Quantitative analysis re-vealed significantly higher expression of MLKL, RIP1 and RIP3 in the liver parenchyma of YF cases compared to controls in different zones (Z3, Z2, Z1) and portal tracts (PT) of the liver, especially in zone 2. Immunostaining confirmed the localization of MLKL, RIP1 and RIP3 in hepatocytes and inflammatory infiltrates, highlighting their involvement in the pathogenesis of YF. Pearson's correlation analysis demonstrated significant correlations between necroptosis markers which indicate their coordinated regulation during YF-induced liver injury.

Arbutus unedo L. is a resilient tree with a circum-Mediterranean distribution. Besides its ecological relevance, it is vital for local economies as a fruit tree. Several microorganisms are responsible for strawberry tree diseases leading to production constrictions. Thus, the development of alternative plant protection strategies is necessary and bacteria endophytes may increase their host overall fitness and productivity. As agricultural practices are a driving factor of microbiota, this paper aimed to isolate, identify and characterize endophytic bacteria from strawberry tree leaves from plants growing spontaneously in a natural environment as well as from plants growing on orchards. 62 endophytes were isolated from leaves and identified as Bacillus, Paenibacillus, Pseudomonas, Sphingomonas and Staphylococcus. Although a slightly higher number of species was found in wild plants, no differences in terms of diversity indexes were found. Sixteen isolates were tested in vitro for their antagonistic effect against A. unedo mycopathogens. B. cereus was the most effective antagonist causing a growth reduction of 20% in Glomerella cingulata and 40% in Phytophthora cinnamomi and Mycosphaerella aurantia. Also, several endophytic isolates exhibited plant growth-promoting potential. This study provides insights into the diversity of endophytic bacteria in A. unedo leaves and their potential role as growth-promoters and pathogen antagonists.

Arbutus unedo L. is a small Ericaceae tree with a circum-Mediterranean distribution. It has a huge ecological impact on southern Europe forests and a great economic importance, as a source of phytochemicals with bioactive properties and for fruit production. On the foreseen climate change context, breeding towards drought tolerance is necessary in order to ameliorate plant performance. The aim of this work was therefore to study the reproduction mechanisms of strawberry tree, obtain new genetic combinations by hybridization and select genotypes more tolerant to drought stress. A morphological analysis of flowers and pollen was carried out, and controlled pollinations performed both in vitro and ex vitro. The very first approach on strawberry tree breeding by means of hybridization is also presented. Several physiological parameters were evaluated on 26 genotypes submitted to a water deficit regime. Plant behavior under drought greatly varied among genotypes, which showed a high phenotype plasticity. Three genotypes that were able to cope with water restriction without compromising net CO2 assimilation were identified as highly tolerant to drought stress. The results obtained elucidate the reproduction mechanisms of strawberry tree and open the way for a long-term breeding program based on the selection of drought tolerant plants.

The paper analyzes the probability distribution of the occupancy numbers and the entropy of a system at the equilibrium composed by an arbitrary number of non-interacting bosons. The probability distribution is derived both by tracing out the environment from a bosonic eigenstate of the union of environment and system of interest (the empirical approach) and by tracing out the environment from the mixed state of the union of environment and system of interest (the Bayesian approach). In the thermodynamic limit, the two coincide and are equal to the multinomial distribution. Furthermore, the paper proposes to identify the physical entropy of the bosonic system with the Shannon entropy of the occupancy numbers, fixing certain contradictions that arise in the classical analysis of thermodynamic entropy. Finally, by leveraging an information-theoretic inequality between the entropy of the multinomial distribution and the entropy of the multivariate hypergeometric distribution, Bayesianism of information theory and empiricism of statistical mechanics are integrated into a common ''infomechanical'' framework.

(1) Background: Reduced magnesium (Mg) levels may be associated with a faster de-cline in renal function. The aim of this study was to evaluate the association of serum and uri-nary Mg levels with body composition and inflammatory markers; (2) Methods: Lon-gitudinal study with patients with chronic kidney disease undergoing non-dialysis treatment in stages 3A, 3B and 4. Venous samples were collected after a 12-hour night fast. Body composition was evaluated by Double X-Ray Emission Absorptiometry and Air Displacement Plethysmog-raphy; (3) Results: The sample consisted of 134 patients. In the adjusted linear regression model, uric acid, percentage of lean mass and ali-mentar intake of Mg were positively associated with the sergic Mg. Triglyceride levels, WC and fat mass percentage were negatively associated with serum Mg. For the Mg urinal, in the adjusted model, the eGFR (estimated glomerular filtration rate), IL (interleukin 6), food intake of Mg and the percentage of lean mass showed a positive correlation.; (4) Conclusions: Serum Mg levels were positively associated with lean mass and negatively with total and central body fat and urinary Mg was positively associated with IL6 and lean mass.

The main challenges in oil platforms are how to define optimal setpoints and decision-making for controlling variables due to many existing dynamical production uncertainties while conceding safe operation and minimizing discharge to sea and atmosphere without killing plantwide inventory. A novel scheduling model to optimize the whole essential units of an oil platform production gathering topside and subsea variables is disclosed. A proper topside and subsea scheduling model enables and creates harmony between optimal production, supply chain, costs, and market dynamics, satisfying demands, environmental and operations constraints leading to stability. The interest of the present research lies in determining the optimal topside and subsea operational settings and decision-making, establishing maximum E&P performance and production control setpoints while predicting and manipulating reservoir lifespan and its revitalization. This objective is attained through a novel multiperiod large-scale model for the planning and operational production scheduling and model predictive control (MPC) in oil platforms complying with sustainability, profitability, platform design capacities, and offloading of oil and gas to supply chains or to pipeline exportation. The present model details heat and mass transfer, PVT, flow profiles along a planning horizon and can be used to any oil platform since comprises all the essential unit operations for oil, gas, CO₂, H₂S and water. The model maximizes the total oil production over any planning horizon. The model is versatile, and decision-making can be either linear or nonlinear but rather a MILP or LP as best choice on optimizing large-scale systems. If the model is applied with auto rescheduling on site within variable hours or minutes, it becomes a real-time optimization schedule approach. Due to its high-velocity performance and robustness, a novel multi-objective function strategy, acting as an LP generic plantwide MPC with industrial scope to maximize production while controlling the process is presented, and as an example is here used to control slug flow to avoid equipment trips and inventory instability, at the same time production is maximized. The output from the decision-making was compared to actual plant data, and the results proved compliance to the design capacity with process safety and sustainability. Comparing to official Brazil's government data for oil, the case study showed superiority to the same size platforms, like FPSOs P-75 and MV32, e.g., more than 101.5% more capacity to produce oil in beginning of campaign after first oil, and 10.5% during campaign. The present work indicates that: 1) the production of millions of barrels is being delayed or left aside; 2) not scheduling production harms the environment and diminish process safety; 3) not scheduling production can create stochastic supply chain deliveries instead of organizing it by deterministic offloading days; 4) scheduling is essential to manipulate, revitalize and monitor reservoir's pressure and content under uncertainty; 5) the oil platform can be automatic optimized by a plantwide MPC reducing human activity/dependency; 6) scheduling gives more transparency to stakeholders and contractors by forecasting business data and capability, and can design, develop or enable new businesses.

This study evaluated the grain size and high organic content from drinking water treatment sludge (DWTS) in the properties of ceramics. Samples were studied using raw and oven dried DWTS at 110 °C in two granulometries (0.180 mm and 0.075 mm), with and without calcination (550 °C), as partial replacement of two soils commonly used in ceramic production. Specimens were prepared with 5, 10, and 20% DWTS and calcined at 950 °C to determine their chemical, physical, mineralogical and mechanical properties. The DWTS reduced the density and increased the absorption and shrinkage of the specimens after calcination. An increase in strength with up to 10% sludge, driven by the presence of fluxing agents, was verified. The processing method had little influence on the properties of ceramic with above 10% of sludge. In conclusion, the use of raw DWTS obtained better results with low energy usage for its reuse.

We are experiencing an unprecedented urbanization process that alongside with physical, social and economic developments is having a significant impact on population’s health. Due to higher apprehensions of pollution, violence and poverty, our modern cities no longer ensure a good quality of life so they become unhealthy environments. This study aims to measure the socio-environmental and hematologic profile of residents of Santo André’s landfill – “Bairro Espírito Santo” by using the contextualization of the studied area. The research method is Observational type and from Retrospective cohort and by convenience sampling in Santo André in the Greater ABC region. The study determined a socio environmental profile and the hematologic diseases screening related to a close location to the landfill. The disease manifests itself within a broad spectrum of symptoms that causes changes in blood count parameters. The full blood counts analysis was performed, indicating that the blood counts of residents living near the landfill led to positive hematological changes and diseases like Leukopenia, Anemia, Neutropenia and lymphocytosis were the most common changes. However it is considered that the proof of the relation of cause- effect to environmental exposures that may trigger chronic manifestations in humans requires specific studies that are often complicated.

One of the significant challenges today in the brain-machine interface using invasive methods is the stability of the chronic record. In recent years, polymer-based electrodes have gained notoriety for achieving mechanical strength values close to that of brain tissue, promoting a lower immune response to the implant. In this work, we fabricated fully polymeric electrodes based on PEDOT:PSS for neural recording in Wistar rats. We characterized the electrical properties and both in-vitro and in-vivo functionality of the electrodes. Also, we employed histological processing and microscopical visualization to evaluate tecidual immune response in 7, 14, and 21 days post-implant days. Electrodes with 400-micrometer channels showed a 12dB signal-to-noise ratio. Local field potentials were characterized under two conditions: anesthetized and free-moving. There was a proliferation of microglia to the tissue-electrode interface in the first days, with a decrease after 14 days. Astrocytes also migrated to the interface, but there was no continuous recruitment of these cells in the tissue, showing inflammatory stability at 21 days. The signal was not affected by this inflammatory action, demonstrating that fully polymeric electrodes can be an alternative to prolong the valuable time of neural recordings.

This study analysed through the perspective of networks the association between physical activity (PA), sedentary behaviour (SB), and cardiovascular risk factors in overweight low-income schoolchildren from the perspective of complex systems. Methods: The sample consisted of 41 overweight children between 6 and 10 years old (56% girls). PA and SB were analysed by accelerometer, and the measures of cardiovascular factor risk were: anthropometric and hemodynamic measurements, body fat, lipid profile and glucose, cardiorespiratory fitness (CRF), left ven-tricular mass (LVM), and Sokolov-Lyon. Network analysis with Boot-strap-1000 was performed to analyze the association between PA, SB and the cardiovascular risk factors. Results: Moderate to vigorous PA was positive related with Waist circumference (WC; 0.499), HDL-C (0.307), and CRF (0.276), and negatively associated with BMI (-0.251) and Fat (-0.341). For SB, positive associations were seen with WC (0.326), CRF (0.296), LVM (0.250) and Sokolov (0.215). Adicionalment, the centrality indicators highlighted WC as the most important variable in the network. Conclu-sion: Interventions that aim to mitigate the harmful effects of obesity on cardiovascular risk factors in overweight children should consider WC as an important variable in of system.

Adaptations to climate change rely on understanding the dynamics of plant biomass stocks on the planet. The high levels of deforestation in Cerrado have transformed this biome into the second-largest Brazilian source of carbon emissions. The objective of this study was to develop a method to accurately estimate aboveground and total biomass values among shrublands, savannas, and forests located in the Cerrado biome, using an allometric equation adjusted from canopy height, obtained through optical and laser sensors. The results show similarity between the estimates employed by our method and the data found in the literature review for different phytophysiognomies in the Cerrado biome. Shrubland formations showed higher biomass estimation uncertainties due to the discontinuity of isolated trees and the lower canopy height when compared to more clustered tree canopies in savannas and taller canopies in forests. Aboveground biomass estimates were related to expansion factors, and specific maps were developed for each compartment by root, litter, and necromass. The sum of these compartments is presented in the aboveground and below forest biomass map. This study presents, for the first time, the mapping of total biomass in 10 m pixels of all regions of the Cerrado biome.

The modern textbook analysis of the thermal state of photons inside a three-dimensional reflective cavity is based on the three quantum numbers that characterize photon’s energy eigenvalues coming out when the boundary conditions are imposed. The crucial passage from the quantum numbers to the continuous frequency is operated by introducing a three dimensional continuous version of the three discrete quantum numbers, that leads to the energy spectral density and to the entropy spectral density. This standard analysis obscures the role of the multiplicity of energy eigenvalues associated to the same eigenfrequency. In this paper we review the past derivations of Bose’s entropy spectral density and present a new analysis of energy spectral density and entropy spectral density based on the multiplicity of energy eigenvalues. Our analysis explicitly defines the eigenfrequency distribution of energy and entropy and uses it as a starting point for the passage from the discrete eigenfrequencies to the continuous frequency.

Social distancing policies put in place during COVID-19 epidemic in addition to helping to limit the spread of the disease also contributed to improving urban air quality. Here we show a decrease in air pollutant concentration as a consequence of mobility reduction in São Paulo during the containment measure which began on 22^nd March 2020. When comparing to foregoing weeks to equivalent periods of 2019, the concentration of most air pollutants sharply decreased in the first days of mobility restriction, to then increase again after government officials downplayed the threat of the disease. This trend is also followed by a decrease in hospital admissions by SARS-influenza. Therefore, despite the great economic and social unrest caused by the pandemic, this unique situation shows that large-scale mobility reduction policy had a significant impact on air quality, benefiting, directly and indirectly, the public health system.

Alzheimer's disease (AD) is a stealthy and progressive neurological disorder that is a leading cause of dementia in the global elderly population, imposing a significant burden on both the elderly and society. Currently, the condition is treated with medications that alleviate symptoms. Nonetheless, these drugs may not consistently produce the desired results and can cause serious side effects. Hence, there is a vigorous pursuit of alternative options to enhance the quality of life for patients. Ginkgo biloba (GB), an herb with historical use in traditional medicine, contains bioactive compounds such as terpenoids (Ginkgolides A, B, and C), polyphenols, organic acids, and flavonoids (quercetin, kaempferol, and isorhamnetin). These compounds are associated with anti-inflammatory, antioxidant, and neuroprotective properties, making them valuable for cognitive health. A systematic search across three databases using specific keywords GB in AD and dementia yielded 1702 documents, leading to the selection of 15 clinical trials for synthesis. In eleven studies, GB extract/EGb 761® was shown to improve cognitive function, neuropsychiatric symptoms, and functional abilities in both dementia types. In four studies, however, there were no significant differences between the GB-treated and placebo groups. Significant improvements were observed in scores obtained from the Mini-Mental State Examination (MMSE), Short Cognitive Performance Test (SKT), and Neuropsychiatric Inventory (NPI). While the majority of synthesized clinical trials show Ginkgo biloba has promising potential in these conditions, more research is needed to determine optimal dosages, effective delivery methods, and appropriate pharmaceutical formulations. Furthermore, a thorough assessment of adverse effects, exploration of long-term use implications, and investigation into potential drug interactions are critical aspects that must be carefully evaluated in future studies.

The present study aimed to evaluate the effect of the citric acid on the properties of solid pine wood, which were submitted to thermomechanical treatment. A preliminary test was performed in a previous study to evaluate the influence of different temperatures of pressing and concentrations of citric acid over the physical properties of wood. After choosing the best treatments (170°C and 5% and 10% of citric acid) it was evaluated the effect of these on the chemical properties (SEM, FTIR and pH), on the density profile using an X-ray microtomography, and on the resistance to ageing through abrasion test. The result of the chemical analysis allowed to observe an increase of the presence of ester functional groups, as well as a better coverage and higher acidity of the surface. The density profile technique allowed to observe the formation of peaks of density on the surface where the acid was applied. Lastly, it was also possible to verify an increase in the resistance to abrasion because of the application of the citric acid.

Distance learning has assumed a relevant role in the Educational scenario. The use of Virtual Learning Environments contributes to obtain a substantial amount of educational data. In this sense, the analyzed data generate knowledge used by institutions to assist managers and professors in strategic planning and teaching. The discovery of students’ behaviors enables a wide variety of intelligent services for assisting in the learning process. This article presents a literature review in order to identify the intelligent services applied in distance learning. The research covers the period from January 2010 to May 2021. The initial search found 1,316 articles, among which 51 were selected for further studies. Considering the selected articles, 33% (17/51) focus on learning systems, 35% (18/51) propose recommendation systems, 26% (13/51) approach predictive systems or models, and 6% (3/51) use assessment tools. This review allowed to observe that the principal services offered are recommendation systems and learning systems. In these services, the analysis of student profiles stands out to identify patterns of behavior, detect low performance and identify probabilities of dropouts from courses.

The new Internet of Things (IoT) applications are enabling the development of projects that help monitoring people with different diseases in their daily lives. Alzheimer’s is a disease that affects neurological functions and needs support to maintain maximum independence and security of patients during this stage of life, as the cure and reversal of symptoms have not yet been discovered. The IoT-based monitoring system provides the caregivers’ support in monitoring people with Alzheimer’s Disease (AD). This paper presents an ontology-based computational model which receives physiological data from external IoT applications, allowing to identify of potentially dangerous behaviors for patients with AD. The main scientific contribution of this work is the specification of a model focusing on Alzheimer’s disease using the analysis of Context Histories and Context Prediction, which considering the state of the art, it is the only one that uses analysis of Context Histories to perform predictions. The research also proposes a simulator to generate activities of the daily life of patients allowing the creation of datasets. These datasets were used to evaluate the contributions of the model and were generated according to the standardization of the ontology. The simulator generated 1025 scenarios applied to guide the predictions, which achieved average accurary of 97.44%. The experiments also allowed the learning of 20 relevant lessons on technological, medical and methodological aspects of DCARE that are recorded in this article.

The art work of this present paper is to show properly conditions and aspects to reach stability in the process control, as also to avoid instability, by using digital PID controllers, with the intention of help the industrial community. The discussed control strategy used to reach stability is to manipulate variables that are directly proportional to their controlled variables. To validate and to put the exposed principles into practice, it was done two simulations of a continuous fermentation tank process start-up with the yeast strain S. Cerevisiae NRRL-Y-132, in which the substrate feed stream contains different types of sugar derived from cane bagasse hydrolysate. These tests were carried out through the resolution of conservation laws, more specifically mass and energy balances, in which the fluid temperature and level inside the tank were the controlled variables. The results showed the facility in stabilize the system by following the exposed proceedings.

This work analyzes the visibility and scientific impact of publications related to agricultural value chains. The incidence of bibliometric indicators allows for the interpretation of bibliographic information generated worldwide. Objective: The objective of this research is to analyze the published literature and bibliometric indicators on agricultural value chains. The Web of Science database was used to extract value chains data. The study analyzed articles published between 2010 and 2020. The keywords used are "agricultural value chains'' and articles from journals or studies related to the subject were selected for bibliometric analysis and methodological review. In the search for the keyword, a total of 4208 results were extracted, of which 1,669 records were considered for analysis. The bibliometric analysis of the data reveals that Wageningen University (55) has the highest number of publications, followed by Chinese Acad Sci (26). The author Klerkx L (9) has the highest number of records, followed by Hellin J (7). With respect to the countries with the greatest contributions on the subject are: the People's Republic of China, Germany, Italy, France and the United States. The study contributes to the analysis of bibliometrics and provides a methodological review of published journal articles on agricultural value chains. This bibliographic study presents the history of research development in agricultural value chains.

Many of engineering’s problems are about to optimise equations, functions and process models equations which appear on common or even complex science’s cases. Most applied optimisation methods nowadays can only be used on particular cases, so the main objective of this article is to define a computational method that can optimise or even find target values for specified objective functions and variables, by just using computer effort. Chemical plants involve many differential equations and they can be optimised with more facility now. On this paper, there are shown as example, an optimisation for a chemical reactor, which is found the optimal temperature and volumetric flow rate of feed, for the given objective function being the composition of the desired product. Named Domain’s Sweep, it is an algorithm that evaluate given(s) mathematical function(s) and/or equation(s) by varying your(s) independent variable(s) through loops with a given step size and solving it after closing the degrees of freedom, and finally, with some condition statements, store all the optimum values of given or created objective functions with its respective independent variables. In another words, the user create an objective function and this method find the function’s maximum, minimum or a certain chosen target value, even if it does not have an inflection point in the given search interval of the independent variables.

This study offers an analysis of existing research on sustainability and its link to accounting and management control in the port sector. The existing studies do not provide a comprehensive discussion of management accounting and control tools in this context, despite recognizing the relevance of the issue. The Scoping Review was used as a methodological basis, with reference to the framework of Arksey and O’Malley [1], with the aim of mapping the literature on the role of ac-counting and management control, as well as their relationship with the Triple Bottom Line associated with the various levels of sustainability in this sector. The results point to a diversity of tools used essentially in developed countries, where the interest in efficiency, sustainability and strategic alignment stands out.

Many anuran strategies for survival involve hydric regulation, and reproduction is not different. The aquaporin (AQP) family plays an important role in water transport and regulation in many tissues, including the male gonad. The testis undergoes various stages of change during the reproductive cycle, and water balance is an important factor in ensuring reproductive success. Considering the relevance of water control in testicular development in anurans and the lack of research regarding the tissue localization of AQP in the male gonad, the present study investigated the expression of three AQPs (1,2, and 9) in the testis of the neotropical anuran species Leptodactylus podicipinus during two different periods of the reproductive cycle. AQP1 and 2 immunoreactions were found in early germ cells, spermatozoa, Leydig cells, and Sertoli cells, which were strongly associated with the reproductive period. AQP1 was also found in the testicular blood vessels. AQP 9 was identified predominantly in the epithelium of the intratesticular ducts of reproductive period individuals. The study present, for the first time, the localization of AQP1, AQP2, and AQP9 in the testis of an anuran species, and the differences in their location during two distinct periods of the reproductive cycle.

Violence against women or gender-based violence (GBV) is a major public health issue facing women and girls in different settings and is reported to have worsened globally during the COVID-19 pandemic. Despite the impact of the COVID-19 pandemic on increased violence against women in general, which has been reported in many settings globally, there is a paucity of evidence of its impact on violence against highly vulnerable women living with HIV or tuberculosis (TB). Using a qualitative design, this study aimed to explore the views and experiences of women living with HIV (n=19) or TB (n=23) in Timor Leste regarding the GBV they faced during the COVID-19 pandemic. They were recruited using the snowballing sampling technique. Data were collected using one-on-one in-depth interviews and focus group discussions. The five steps of qualitative data analysis suggested in Ritchie and Spencer’s analysis framework were employed to guide the analysis of the findings. Findings indicated that women in this study experienced intensified physical, verbal, sexual and psychological violence by their partners, spouses, in-laws, and parents or other family members during the COVID-19 pandemic. Several prominent risk factors that worsened violence against women during the pandemic were (i) HIV or TB-positive status, (ii) traditional gender roles or responsibilities and expectations, (iii) economic and financial difficulties reflected in the loss of jobs and incomes due to the pandemic, and (iv) individual factors such as jealousy and increased alcohol drinking developed during the lockdowns. The findings underscore the urgent need for multifaceted interventions to address GBV, which should encompass challenging traditional gender norms, addressing economic inequalities, and targeting individual-level risk factors. The findings also indicate the need for the development of robust monitoring and evaluation systems to assess the effectiveness of policies and interventions addressing GBV where the results can inform future improvement. The findings also indicate the need to include GBV in the protocol or guidelines for HIV and TB management. Future large-scale quantitative studies to capture the magnitude and specific drivers of GBV against women living with HIV and TB during the pandemic are recommended.

The number of physical devices connected to the Internet such as vehicles, household appliances and other "things" has been steadily increasing in recent years, thus forming the basis for the Internet of Things (IoT). IoT ecosystem extends beyond country borders and application domains, combining thousands of versatile devices that differ in terms of their structures, capabilities, and available resources. It is therefore not surprising that the landscape of wireless communication technologies and the degree of IoT devices available today is excessively broad and diverse. Interference between networks leads to frame collisions and consequent packet loss. Frame collisions occur when two or more packets overlap in time and frequency and use the same Long Range (LoRa) parameters, i.e. the same Spreading Factor (SF), Bandwidth (BW) and Carrier Frequency (CF). When most devices use the same configuration, collision probability is higher. The probability of frame collisions is also affected by traffic characteristics, particularly the periodicity of the transmission and the payload size. Larger payload sizes and more frequent transmissions accumulate with higher Time on Air (ToA) and channel occupancy [1]. Transmission powers and the location of the gateways also influences this situation. The aim of this experimental work is to verify the effects of collisions and interference in Long Range Wide Area Network (LoRaWAN), regarding the periodicity of transmissions and the payload sizes in a context of an inter-SF interference scenario. And to validate measuring tools like Received Signal Strength Indicator (RSSI), ToA and Packet Delivery Ratio (PDR) in the reliability of a network. We validate our conclusions by analyzing ToA according with RSSI and different data sizes, the RSSI for different SFs and different data sizes and finally the packet loss through the PDR for a better understanding of the reliability of packet transmission in our link. In the end we conclude that in an environment with inter-SF interference, the choice of SFs and packet lengths impacts ToA. When dealing with multiple devices near gateways, different SFs and varying packet lengths can lead to increased latency and longer ToA. Consequently, the risk of packet loss becomes more significant, especially if the signal-to-interference ratio (SIR) is low. This limitation will therefore affect scalability, particularly in Non-Line-Of-Sight (NLOS) scenarios.

Background: The prevalence of human T-lymphotropic virus type-1 (HTLV-1) infection is higher in women, and sexual intercourse has been described as an important route of male-to-female transmission. The present study aimed to quantify HTLV-1 proviral load (PVL) in vaginal fluid, and to investigate correlations with PVL in peripheral blood mononuclear cells (PBMC). Methods: HTLV-1-infected women were consecutively recruited at a multidisciplinary center for HTLV patients in Salvador-Brazil. All women underwent gynecological examinations to obtain cervicovaginal fluid and venipuncture for blood collection. PVL, as measured by real-time quantitative polymerase chain reaction (RT-qPCR), was expressed as the number of copies of HTLV-1/106 cells in blood and vaginal fluid samples. Light microscopy was used to assess cervicovaginal cytopathology and vaginal microbiota. Results: In the 56 included women (43 asymptomatic carriers and 13 diagnosed with HTLV-associated myelopathy/tropical spastic paraparesis-HAM/TSP), mean age was 35.9 (SD±7.2) years. PVL was higher in PBMCs [median: 23,264 copies/106 cells (IQR: 7,420 - 64,371)] than in vaginal fluid [451.9 copies/106 cells (IQR: 0 - 2,672)] (p<0.0001). PVL in PBMCs was observed to correlate directly with PVL in vaginal fluid (R=0.32, p=0.01). PVL was undetectable in vaginal fluid samples from 20 women (35.7%), most of whom were asymptomatic (19/20). Cytopathologic analyses revealed no differences between women with detectable or undetectable PVL. Conclusion: HTLV-1 proviral load is detectable in vaginal fluid and correlates directly with proviral load in peripheral blood. This finding suggests that sexual transmission of HTLV-1 from female to male may occur and vertical transmission, particularly in the context of vaginal delivery.

The advancement of mechanization in forestry has increased productivity in the forestry sector, bringing positive and negative impacts that require a deeper understanding for sustainable forest management. This study aimed to apply a simplified instrument for assessing damage and environmental impacts in forest harvesting of commercial eucalyptus plantations, using a combination of methodologies. The methodology used combined interaction networks and impact assessment matrices, carrying out field surveys, transposing them to interaction networks and weighting them through assessment matrices, resulting in environmental indices (ES) for prioritizing actions. The study was conducted on a commercial eucalyptus plantation in the municipality of São Pedro, São Paulo, Brazil. The mechanized harvesting of the area consists of the structure of a module with a mobile unit consisting of a harvester and forwarder. The results indicated that wood transport presented the highest ES, both positive and negative. The most significant negative impacts (ES) were the depletion of water resources and erosion, while the positive impacts included regional development and job creation. The most notable changes, positive and negative, were observed in the physical and anthropic environment, with a lesser impact on the biotic environment.

Fungi kingdom comprises ubiquitous forms of life with 1.5 billion years, mostly phytopathogenic and commensal for humans and animals. However, in the presence of impaired conditions fungi may cause disease by intoxicating, infecting or sensitizing with allergy. Different genera may be implicated as etiological agents for humans and animals, with Alternaria, Aspergillus, dermatophytes like Microsporum and Trichophyton, and Malassezia as the commonly implicated. Alternaria and Malassezia stand as the most commonly associated to either allergy or infection, immediately followed by Aspergillus, while dermatophytes are usually associated to ring worm skin infection. Research in veterinary field is not much but necessary.

Keywords: Lightning; Land Cover and Land Use; Topographic Effects, Itacaiúnas River Hydrographic Basin

(1) Background: Sarcopenia, a condition characterized by a decrease in muscle mass and strength, is very common in patients with obesity and can be aggravated by bariatric surgery, potentially compromising the clinical results of surgery. There is increasing interest in pa-tient-reported outcome measures (PROMs) to assess results in other health variables that may be especially important for individual patients. The role of exercise in enhancing health-related quality of life (HRQoL) after surgery remains underexplored. This study investigated the impact of exercise on HRQoL in bariatric sarcopenic patients via the Sarcopenia Quality of Life (SarQoL) questionnaire. (2) Method: Candidates for surgery took part in the EXPOBAR program and were randomized into experimental and control groups. The intervention lasted 16 weeks, starting one month after surgery, and included combined aerobic and resistance exercise. Outcomes, including body composition and physical fitness parameters, were measured before and after the intervention. All participants underwent gastric bypass surgery (RYGB). (3) Results: The baseline characteristics of the participants were not significantly different between the two groups. All patients met the criteria for moderate/severe obesity and the EASO/ESPEN criteria for sarcopenia, namely, reduced muscle strength assessed by grip strength and reduced muscle mass assessed by the ASMM score/weight. After completing the study protocol, patients in both groups had increased HRQoL, but the increase was significantly greater in the intervention group than in the control group. (4) Conclusion: Our findings suggest that exercise plays a crucial role in improving both physical and psychological well-being in postbariatric patients, highlighting the need to integrate structured exercise programs in post-surgery care. This study was prospectively registered at Clinicaltrials.gov (NCT03497546).

Staphylococcus aureus frequently causes subclinical mastitis around the world with high impact in milk industry and public health. Essential oils (EO) are recognized antimicrobials that can be synergistic with antibiotics. The main objective of this study was evaluating the essential oil (EO) of Melaleuca armillaris as an adjuvant of erythromycin (ERY) for the alternative treatment of bovine mastitis caused by S. aureus. The Minimum Inhibitory and Bactericidal Concentrations (MIC and MBC) of EO, ERY, and its combinations were established against S. aureus at different pHs (7.4, 6.5 and 5.0), emulating extra and intracellular conditions. Sensible (N=3) and resistant (N=3) strains to ERY and S. aureus ATCC 29213 as control were used. Math models were applied to described the antibacterial activity of EO and combinations EO-ERY. The EO was bactericidal against all the strains independently of the pH with a slightly improvement in acid conditions. The synergism between EO and ERY was estimated by the Fractional Inhibitory Concentration Index (FIC) and by mathematical modeling of the bacterial killing data. Synergism was observed with ERY, where combinations had bactericidal activity also even with pH modification. M. armillaris EO is an interesting adjuvant for ERY, being a promissory option for further analysis of intracellular efficacy against S. aureus.

The signature of chaotic systems can be characterized either by the sensitivity of the initial conditions or by the change of its parameters. This feature can be used for manufacturing high sensitivity sensors. Sensors based on chaotic circuits have already been used for measuring water salinity, inductive effects, and both noise and weak signals. This article investigates an impedance sensor based on the Van der Pol and Duffing damped oscillators. The calibration process is a key point and therefore the folding behavior of signal periods was also explored. A sensitivity of 0.15 kΩ/Period was estimated over a range from 89.5 to 91.6 kΩ. This range can be adjusted according to the application by varying the gain of the operational amplifier used in this implementation. The development of this type of sensor might be used in medical and biological engineering for skin impedance measurements, for example. This type of chaotic sensor has the advantage of sensing small disturbances and then detect small impedance changes within biological materials which, in turn, may not be possible with other detectors.

Among the many Lysosomal Storage Disorders (LSDs) that would benefit from the establish-ment of novel cell models, either patient-derived or genetically engineered, is Mucopolysaccha-ridosis type II (MPS II). In fact, even though a specific therapeutic approach does exist for this disorder (Enzyme Replacement Therapy, ERT, with recombinant human IDS) and haematopoiet-ic stem cell transplantation (HSCT) may also hold promise whenever the disorder is diagnosed soon enough, both approaches have their own drawbacks. Here we present our results on the establishment and characterization of two MPS II pa-tient-derived stem cell line(s) from deciduous baby teeth. To the best of our knowledge, this is the first time a stem cell population is isolated from LSD patient samples obtained from the oral cavity. Taking into account our results on the molecular and biochemical characterization of those cells and our first insights on their subcellular MPS phenotype, we consider these cells will be a valuable tool for both pathophysiological assessments and drugs screenings. Ultimately, we believe patient-derived dental pulp stem cells (DPSC) may represent a feasible alternative to induced pluripotent stem cells (iPSC) in many labs with standard cell culture con-ditions and limited (human and economic) resources.

Since its inception in December 2019, Covid-19 has challenged the global scientific community. Some treatments were used in this infection, but doubts still persist regarding the use of medications ¹. More severe cases complicate with endothelial dysfunction, excess thrombin synthesis and decreased fibrinolysis which, associated with hypoxemia, lead to a hypercoagulability state ² and some authors indicate the use of anticoagulants for these ³. For mild cases, doubts remain regarding this indication. We will report the case of a patient with mild symptoms of covid-19, complicated by inferior mesenteric vein thrombosis.

Chagas disease is a Neglected Tropical Disease with limited and ineffective therapy. In a search for new antitrypanosomal compounds, we investigated the potential of metabolites from bacteria living in corals and sediments of the Southeastern Brazilian coast. Three corals Tubastraea coccinea, Mussismilia hispida, Madracis decactis and sediments yielded 11 bacterial strains, that were fully identified by MALDI-ToF/MS or gene sequencing, resulting in six genera - Vibrio, Shewanella, Mesoflavibacter, Halomonas, Bacillus and Alteromonas. To conduct this study, EtOAc extracts were prepared and tested against Trypanosoma cruzi. Crude extracts showed IC50 values ranging from 15 to 51 μg/mL against trypomastigotes. The bacterium Mesoflavibacter zeaxanthinifaciens was selected for fractionation, resulting in an active fraction (FII) with IC50 values of 17.7 μg/mL and 23.8 μg/mL against the trypomastigotes and amastigotes, respectively, with neither mammalian cytotoxicity nor hemolytic activity. Using NMR and ESI-HRMS analysis, FII revealed the presence of unsaturated iso-type fatty acids. Its lethal action was investigated, leading to a protein spectral profile of the parasite altered after treatment. FII also induced a rapid permeabilization of the plasma membrane of the parasite, leading to cell death. These findings demonstrate these unsaturated iso-type fatty acids as possible new hits against T. cruzi.

Essential oils (EO) are a great antimicrobial resource against bacterial resistance in public health. Math models are useful describing the growth, survival, and inactivation of microorganisms against antimicrobials. We evaluated the antimicrobial activity of M. armillaris EO obtained from plants placed in the province of Buenos Aires (Argentina) against Staphylococcus aureus. Minimum Inhibitory and Bactericidal Concentrations were close and decreased slightly acidifying the medium from pH 7.4 to 6.5 and 5.0. This result was also evidenced by applying a sigmoid model, where the time and EO concentration necessaries to achieve 50% of the maximum effect decreased when medium was acidified. Moreover, at pH 7.4, applying the Gompertz model, we found that subinhibitory concentrations of EO decreased the growth rate and the maximum population density, and increased the latency period respect to the control. Additionally, we established physicochemical parameters for quality control and standardization of M. armillaris EO. Mathematical modelling allowed us to estimate key parameters in the behavior of S. aureus and Melaleuca armillaris EO at different pHs. This is interesting in situations where the pH changes are relevant, such as the control of intracellular infections in public health or the development of preservatives for food industry.

In this work, we present a model of the atom that is based on a nonclassical logic called paraconsistent logic (PL), which has the main property of accepting the contradiction in logical interpretations without the conclusions being annulled. The proposed model is constructed with an extension of PL called paraconsistent annotated logic with annotation of two values (PAL2v), which is associated with an interlaced bilattice of four vertices. We use the logarithmic function of the Shannon entropy H_(s) to construct the paraconsistent equations and thus adapt a probabilistic model for representations in quantum physics. Through analyses of the interlaced bilattice, comparative values are obtained for some of the phenomena and effects of quantum mechanics, such as superposition of states, quantum entanglement, wave functions, and equations that determine the energy levels of the layers of an atom. At the end of this article, we use the hydrogen atom as a basis of the representation of the PAL2v model, where the values of the energy levels in six orbital layers are obtained. As an example, we present a possible method of applying the PAL2v model to the use of Raman spectroscopy signals in the detection of lubricating mineral oil quality.

IntroductionGlycogen synthase kinase 3 (GSK-3) has been associated with a lot of diseases, such as Alzheimer’s Disease and diabetes. Its role in depression is connected to stress and neuroinflammation. Lithium is an essential inhibitor of GSK-3. Some studies have suggested that the use of this psychiatric medication may lower suicide rates. Here, we outline the current understanding and discoveries regarding the link between GSK-3 and suicide. MethodWe used the PRISMA statement and defined the PECOS strategy, such as Population (P) = individuals; exposure (E) = GSK-3 alteration function; comparison (C) = without GSK-3 alteration function; outcome (O) = suicide; and study design(S) = all kinds of studies with an association between GSK-3 and suicide.ResultsTwelve studies were included in this review. GSK-3 appears to be related to suicidal behavior by activating inflammatory pathways, activating genes, altering neurotransmission, and increasing impulsivity. Clinical studies do not present robust results that allow defining an epidemiological profile of greater risk for suicidal behavior in association with changes in the functioning of GSK-3.ConclusionThe interference of GSK-3 functioning in suicidal behavior seems inevitable, with solid evidence from laboratory animal studies. However, there is a need for further clinical studies on this crucial topic to answer better some questions about the association between GSK-3 and suicide.

Empirical Orthogonal Functions (EOF) analysis between the anomalies of Lake Titicaca water levels (WLs) and the Pacific Interdecadal Oscillation (IPO) reveals a correlation coefficient of 0.71 between the WLs and the principal component (PC1). These findings demonstrate the high accuracy of the IPO in representing the positive and negative phases of the water levels. By utilizing wavelet functions, we identified multi-decadal variability with periods ranging between 20 and 30 years. The statistical techniques employed indicate a relationship between IPO and ENSO; however, they operate on different timescales of climate variability. The IPO exhibits longer-term variability, typically spanning 20-30 years, while ENSO events occur on average every 2-7 years. Nevertheless, the IPO has the ability to modulate the strength and frequency of El Niño and La Niña events, and vice versa. During the positive phase of the IPO, there is a tendency for more frequent and intense El Niño events, accompanied by fewer La Niña events. This can be attributed to warmer sea surface temperatures in the central and eastern Pacific, which create favorable conditions for El Niño development. Conversely, during the negative phase of the IPO, there is a tendency for more frequent and intense La Niña events, with fewer occurrences of El Niño events, due to cooler sea surface temperatures in the central and eastern Pacific.

The analysis of the morphological features can be framed in different temporal and spatial scales, depending on the specific objectives and methodologies of the various scientific fields that find in them a valuable source of information. The inventory and assessment of the geomorphological heritage may be based not exclusively in geophysical factors, but also in its contribution to the structuring of the biosphere, in its interrelation with other types of heritage or even in its potential for research or education purposes. In this article, we proceeded to the selection of a set of geomorphosites, at different scales, in Serra do Alvão (northern Portugal), seeking to demonstrate the importance of the broad lines of relief and intermediate and detailed landforms to the organization of the cultural landscape. Based on a questionnaire applied to a sample of 104 persons, it was intended to assess the value of the geomorphosites, concerning the scientific, preservation, use, cultural and educational dimensions.

Glucose is a simple sugar molecule. The sugar molecule is chemically symbolised as C6H12O6. This means that the glucose molecule contains 6 carbon atoms (C), 12 hydrogen atoms (H) and 6 oxygen atoms (O). In human blood, the molecule glucose circulates as blood sugar. Normally after eating or drinking, our body breaks down the sugars in food and uses them to obtain energy for our cells. To do this, our pancreas produces insulin. Insulin "pulls" sugar from the blood and puts it into the cells for use. If someone has diabetes, their pancreas can't produce enough insulin. As a result, the level of glucose in the blood rises. This can lead one to many potential complications, including blindness, disease, nerve damage, amputation, stroke, heart attack and damage to blood vessels etc. In this study, a non-invasive method for monitoring blood glucose has been developed and is therefore easily usable. The device developed can measure the glucose level continuously and eliminates the disadvantages of the invasive system. Near-IR sensors (optical sensors) were used to estimate the concentration of glucose in the blood; these sensors have a wavelength of 940 nm. The sensor is placed on the tip of the finger and the output of the optical sensor is then connected to the microcontroller at the analogue input. Another sensor used, but only to provide more medical information was the heartbeat sensor. After processing and regression analysis, the glucose level is predicted, and data is sent via the Bluetooth network to a developed APP. The results of the implemented device were compared with available invasive methods. The study consists of a hardware platform inserted into an armband and then a small black parallelepiped-shaped box in which the optical sensors are inserted. The hardware consists of a microcontroller, a Near-IR optical sensor, a heartbeat sensor and a Bluetooth module.

Context: CYP21A2 deficiency represents 95% of congenital adrenal hyperplasia cases (CAH), a group of genetic disorders that affect steroid biosynthesis. The genetic and functional analysis provides critical tools to elucidate complex CAH cases. One of the most accessible tools to infer the pathogenicity of new variants is in silico prediction. Objective: Analyze the performance of in silico prediction tools to categorize missense single nucleotide variants (SNVs) of the CYP21A2. Methods: SNVs of the CYP21A2 characterized in vitro by functional assays were selected to assess the performance of online single and meta predictors. SNVs were tested separately or in combination with the related phenotype (severe or mild CAH form). In total, 103 SNVs of the CYP21A2 (90 pathogenic and 13 neutral) were used to test the performance of 13 single-predictors and four meta-predictors. Results: SNVs associated with the severe phenotypes were well categorized by all tools, with an accuracy between 0.69 (PredictSNP2) and 0.97 (CADD), and Matthews' correlation coefficient (MCC) between 0.49 (PoredicSNP2) and 0.90 (CADD). However, SNVs related to the mild phenotype had more variation, with the accuracy between 0.47 (S3Ds&GO and MAPP) and 0.88 (CADD), and MCC between 0.18 (MAPP) and 0.71 (CADD). Conclusion: From our analysis, we identified four predictors of CYP21A2 pathogenicity with good performance. These results can be used for future analysis to infer the impact of uncharacterized SNVs' in CYP21A2.

This work aims to investigate the effect of process temperature and catalyst content by pyrolysis and thermal catalytic cracking of (organic matter + paper) fraction from municipal household solid waste (MHSW) on the yields of reaction products (bio-oil, bio-char, H2O, and gas), acid value and chemical composition of bio-oils, and characterization of bio-chars, in laboratory scale. The collecting sectors of MHSW in the municipality of Belém-Pará-Brazil were chosen based on geographic and socio-economic database. The MHSW collected and transported to the segregation area. The gravimetric analysis of MHSW carried out and the fractions (Paper, Cardboard, Tetra Pack, Hard Plastic, Soft Plastic, Metal, Glass, Organic Matter, and Inert) separated. The selected organic matter and paper submitted to pre-treatment of crushing, drying, and sieving. The experiments carried out at 400, 450, and 475 °C and 1.0 atmosphere, and at 475 °C and 1.0 atmosphere, using 5.0, 10.0, and 15.0% (wt.) Ca(OH)2, in batch mode. The bio-oil characterized for acid value. The chemical functions present in bio-oil identified by FT-IR and the composition by GC-MS. The bio-char characterized by SEM, FT-IR and XRD. The variance in mass (wt.%) for organic fraction of municipal household solid waste, between 56.21 and 67.45% (wt.), lies with the interval of 56% (wt.) and 64% (wt.) of OFMHSW for middle and low income countries. The pyrolysis of MHSW fraction (organic matter + paper) show bio-oil yields between 2.63 and 9.41% (wt.), aqueous phase yields between 28.58 and 35.08% (wt.), solid phase yields between 35.29 and 45.75% (wt.), and gas yields between 16.54 and 26.72% (wt.). The bio-oil yield increases with pyrolysis temperature. For the catalytic cracking, the bio-oil and gas yields increase slightly with CaO content, while that of bio-char decreases, and the H2O phase remains constant. The GC-MS of liquid reaction products identified the presence of hydrocarbons (alkanes, alkenes, alkynes, cycloalkanes, and aromatics) and oxygenates (carboxylic acids, ketones, esters, alcohols, phenols, and aldehydes), as well as compounds containing nitrogen, including amides and amines. The acidity of bio-oil decreases with increasing process temperature and with aid Ca(OH)2 as catalyst. The concentration of hydrocarbons in bio-oil increases with increasing Ca(OH)2-to-MHSW fraction ratio due to the catalytic deoxygenation of fatty acids molecules, by means of de-carboxylation/de-carbonylation, producing aliphatic and aromatic hydrocarbons.

Wounds are an increasing global concern, mainly due to a sedentary lifestyle, frequently associated to the occidental way of life. The current prevalence of obesity in western societies, leading to an increase in type II diabetes, and an elderly population, are also a key factor associated to the problem of wounds healing. Therefore, it stands essential to find wound dressing systems allowing reestablishing the skin integrity in the shortest possible time and with the lowest cost, avoiding further damage and promoting patients´ well-being. Wounds can be classified into acute or chronic, depending essentially on the duration of the healing process, which is associated with. It depends on the extent and depth of wound, localization, level of infection and on the patient health status. For each kind of wound and respective healing stage there is a more suitable dressing. The aim of this review was to focus on the possible wound dressing management, aiming the more adequate healing approach for each kind of wound.

Visceral leishmaniasis (VL)is a fatal disease caused by the protozoa Leishmania infantum for which dogs are the main reservoirs. A vaccine against canine visceral leishmaniasis (CVL) could be an important tool in the control of human and CVL by reducing the infection pressure of L. infantum. Despite the CVL vaccine available on the market, the Brazilian Ministry of Health did not implement the use of it in their control programs. In this sense, there is an urgent need to develop more efficient vaccines. In this study, the association between two polymeric nanoformulations, [poly (D, L-lactic) acid (PLA) polymer] loading Leishmania amazonensis antigens, was evaluated as a potential immunobiological agent against VL using golden hamsters as an experimental model. The results indicated that no significant adverse reactions were observed in animals vaccinated with LAPSmP. LAPSmP presented similar levels of total anti-Leishmania IgG as compared to LAPSmG. The LAPSmP and LAPSmG groups showed an intense reduction in liver and spleen parasitic load by qPCR. The LAPSmP and LAPSmG vaccines showed exceptional results, indicating that they may be promising candidates as a VL vaccine.

Introduction: Obesity affects over 650 million individuals worldwide and it is a major public health problem. Bariatric surgery is the most effective treatment for severe obesity, resulting in significant weight reduction and improvement in obesity-related conditions. However, the weight loss achieved through bariatric surgery often correlates with a notable decrease in skeletal muscle. This correlation suggests an elevated risk of sarcopenia among patients after surgery. The aim of this study was to evaluate the effects of obesity and bariatric surgery on sarcopenia-related indicators and diagnosis before and after surgery. Methods: A total of 17 bariatric surgery patients were included in this prospective study. The parameters to diagnose sarcopenia were determined for each participant, based on EWGSOP2 and EASO/ESPEN consensuses. All evaluations were performed on the five moments of this study: before surgery and at 1, 6, 12 and 18 months after surgery. Results: In this study, 88.2% of the subjects were female, the mean BMI was 42.9 kg/m² and the mean weight was 105.9 kg. After surgery, the mean weight consistently decreased, with all differences from baseline being statistically significant (p<0.001). When using the SARC-F questionnaire for screening, the risk of sarcopenia increased post-surgery, and decreased at 12 months, declining to zero at 18 months. Muscle strength decreased significantly (p=0.002) at the 1 month after surgery assessment, with slight variations thereafter, none statistically significant. Muscle mass was normal before surgery but decreased significantly post-surgery (p<0.001). When applying the ESPEN/EASO consensus cut-off criteria for sarcopenic obesity, 35.3% of the patients met the criteria preoperatively. After surgery, the results increased to 70.6% in the first month but decreased afterward to 41.2% at 6 months. Discussion: This study evaluated the impact of bariatric surgery on sarcopenia and sarcopenic obesity, for a duration of up to 18 months after surgery, using the EWGSOP2 and ESPEN/EASO consensuses criteria. Bariatric surgery, the most effective treatment for severe obesity, often results in muscle mass loss alongside fat loss. Handgrip strength, a key sarcopenia indicator, showed a significant early post-surgery decline, whereas the weight-dependent sit-to-stand test did not. This suggests weight loss impacts different muscle function tests variably. Muscle mass decreased continuously after surgery. However, other indicators had mixed results. Applying ESPEN/EASO guidelines, the study found a temporary post-surgery increase in sarcopenic obesity, peaking at one month and returning to pre-surgery levels by six months. However, different criteria led to different results. Conclusion: The results indicate a clear deleterious impact of bariatric surgery on muscle strength and mass, the most important indicators of sarcopenia. Also, the impact seems to occur very early after surgery, indicating that the appropriate timeframe to try to prevent this effect may be the prehabilitation period followed by the post-surgery timeframe.

Most fungal species are commensals, not pathogenic for plants, humans, or animals. However, several species from genera Alternaria, Aspergillus, Trichophyton and Microsporum are common causes of disease, even for immunocompetent individuals, contributing to skin barrier impairment. A total of 68 allergic dogs were selected from a veterinary dermatology and allergy outpatient consultation, for conditions related to Malassezia overgrowth or other fungal complications. Allergy diagnosis was made through anamnestic and clinical criteria and allergy-implicated species were identified by intradermal testing (IDT) and serum determination of specific immunoglobulin E (sIgE). Dermatophagoides farinae, Dactylis glomerata and Malassezia pachydermatis showed as the higher sensitization species from each group. Significant correlations at p<0.05 were found between Dactylis glomerata and Phleum pratense grass pollens, Dermatophagoides farinae and Dermatophagoides pteronyssinus, Acarus siro, Tyrophagus putrescentiae and Lepidoglyphus destructor dust/storage mites, and between fungi like Aspergillus mix and Penicillium or Alternaria alternata. A significant correlation was also found between sensitization to Aspergillus mix and D. farinae, D. pteronyssinus or A. siro. Rather severe dermatitis was observed where positive IDT to Malassezia pachydermatis was found, regardless of the presence of circulating sIgE, allowing us to perceive the usefulness of both sIgE and IDT for allergy diagnosis to fungi.

Background: Hospital accreditation has become ubiquitous in developing countries. Although studies recognize that accreditation can improve healthcare quality, efficiency, and safety, there are doubts about how hospitals deal with conflicts caused by the different institutional logics that inhabit this process. Therefore, this study aimed to investigate how professional and market logics, as well as the conflict between institutional demands, affect compliance with hospital accreditation. Methods: To this end, we developed a multiple case study in four Brazilian hospitals through in-depth interviews with sixteen participants (managers, physicians, nurses, physiotherapist) and on-site observation by the triangulation between the analysis of the narratives and the results of the multiple correspondence analysis. The interpretation and subsequent categorization of the interviews were guided by the study's analytical categories: institutional logics (professional and market); adoption objectives (legitimacy and efficiency); strategic responses to adoption (conformity, non-conformity, and customization); nature of demands (origin in the means and in goal). Results. The data showed that when professional logic is prominent, there is a greater tendency to customize activities, as there are conflicts in the means by which activities can be developed. When market logic stands out, there is a risk of non-conformity, mainly because the focus falls exclusively on goals. Finally, the data point to the absence of conflicts between justifications related to efficiency and legitimacy. Conclusion. We conclude the study by highlighting the theoretical and practical implications of recognizing the conflict between logics, contributing to a deeper understanding of how logic influences the attention given to specific demands and, more significantly, how they affect compliance with hospital accreditation standards, expanding the body of knowledge in the area.

B chromosomes (B) are supernumerary elements found in many taxonomic groups. Most B chromosomes are rich in heterochromatin and composed of abundant repetitive sequences, especially transposable elements (TEs). Bs origin is generally linked to the A chromosome complement (A). The first report of a B chromosome in African cichlids was on Astatotilapia latifasciata, which can harbor 0, 1 or 2 B chromosomes. Classical cytogenetics studies found high TE content on the species B chromosome. In this study, we aim to understand TE composition and expression on A. latifasciata genome and its relation to the B chromosome. We use bioinformatics analysis to explore TEs genome organization and also their composition on the B chromosome. Bioinformatics findings were validated by fluorescent in situ hybridization (FISH) and real-time PCR (qPCR). A. latifasciata has a TE content similar to other cichlid fishes and several expanded elements on its B chromosome. With RNA sequencing data (RNA-seq) we showed that all major TE classes are transcribed in brain, muscle and male/female gonads. The evaluation of TE expression between B- and B+ individuals showed that few elements have differential expression among groups and expanded B elements were not highly transcribed. Putative silencing mechanisms may the acting on the B chromosome of A. latifasciata to prevent adverse consequences of repeat transcription and mobilization in the genome.

Technology has transformed aeroponics, providing numerous advantages over traditional soil-based agriculture. However, there remains a need for comprehensive information on the types of technology employed in aeroponics and their impact on the growing process. This paper presents a literature review of 47 studies published between 2012 and 2023 in peer-reviewed journals and conference proceedings. As a result, it identifies the status and tendencies in the usage of technology in aeroponics as well as the main opportunities and challenges. Furthermore, this paper introduces the Technology Adoption and Integration in Sustainable Agriculture (TAISA) model. TAISA is a model that identifies the degree of technology integration in any sustainable agriculture system to determine how technology affects production and quality. Overall, the systematic review suggests that technology can play a vital role in improving the efficiency and sustainability of aeroponic farming. However, careful consideration must be given to the costs and technical requirements associated with using these technologies. Moreover, the TAISA model reveals that technology has primarily been employed in creating new processes that are not possible to implement without the help of technology. Therefore, we conclude that technology use has taken root in aeroponics and can be promoted to improve sustainable agriculture.

This manuscript examines from the diurnal convection cycle (CDC) to the interdecadal variability in the region of the Peruvian Altiplano (RAP). Currently, estimating precipitation using satellites is an alternative which can be used to study the spatio-temporal evolution of precipitation systems. Herein CPC data Morphing technique - CMORPH (Joyce et al, 2004) was used between 2002 and 2014 to analyze the CDC in RAP. The CMOPRH data were compared with rainfall data series measured by rain gauges of meteorological stations (EMS) in the RAP. The results indicate that the CDC shows high variability in the Titicaca Basin and is associated with patterns of lake breeze (day), land breeze (night) and mountain - valley circulation. The CDC starts at 1800 HL (local time) in the northern region of Lake Titicaca, lasting between 2 h and 6 h, and most of 2000 HL. The CDC over the dry surface (ST) of Titicaca Basin starts early at around 1200 HL, lasting 4 h to 7 h, and maximum at 1800 HL.

Additive Manufacturing (AM) has been proving suitable to support or even replace traditional manufacturing in several industries, offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and greenhouse gas (GHG) emissions. This study aimed to carry out a comparative assessment of the life cycle, from gate to gate, in the production of a low alloy carbon steel flange part using ER-90 wire. The methods utilized were Wire and Arc Additive Manufacturing (WAAM) and conventional manufacturing (CM) by forging, and comparative factors were energy demands, GHG emissions and generated solid waste. The total energy consumption in WAAM was 10,239.40 MJ, total carbon footprint in CO2 equivalent (CO2e) was 714.1 kgCO2e kg-1, and generated solid waste was 68.6 kg, respectively, 90%, 95% and 76% lower than consumption calculated in conventional manufacturing.

Preliminaries Convolutional Neural Network (CNN) applications have recently emerged in Structural Health Monitoring (SHM) systems focusing mostly on vibration analysis. However, the SHM literature shows clearly that there is a lack of application regarding the combination of PZT (Lead Zirconate Titanate) based method and CNN. Likewise, applications using CNN along with the Electromechanical Impedance (EMI) technique applied to SHM systems are rare. To encourage this combination, an innovative SHM solution through the combination of the EMI-PZT and CNN is presented here. To accomplish this, the EMI signature is split into several parts followed by computing the Euclidean distances among them to form a RGB (red, green and blue) frame. As a result, we introduce a dataset formed from the EMI-PZT signals of 720 frames, encompassing a total of 4 types of structural conditions for each PZT. In a case study, the CNN-based method was experimentally evaluated using three PZTs glued onto an aluminum plate. The results reveal an effective pattern classification; yielding a 100% hit rate which outperforms other SHM approaches. Furthermore, the method needs only a small dataset for training the CNN, providing several advantages for industrial applications.

This work aims to investigate the influence of reaction time and catalyst-to-residual fat ratio by catalytic upgrading from pyrolysis vapors of residual fat at 400 °C and 1.0 atmosphere, on the yields of reaction products, physicochemical properties (density, kinematic viscosity, and acid value) and chemical composition of bio-oils, over a catalyst fixed bed reactor of activated carbon pellets impregnated with 10.0 M NaOH, in semi pilot scale. The experiments were carried out at 400 °C and 1.0 atmosphere, using a process schema consisting of a thermal cracking reactor of 2.0 L coupled to a catalyst fixed bed reactor of 53 mL, without catalyst and using 5.0, 7.5, and 10.0% (wt.) activated carbon pellets impregnated with 10.0 M NaOH, in batch mode. Samples of liquid phase products were withdrawn during the course of reaction at 50, 60, 70, 80, 90, 100 and 120 minutes in order to investigate the process kinetics. The physicochemical properties (density, kinematic viscosity, and acid value) of bio-oils were determined by official methods. The chemical composition of bio-oils determined by GC-MS. The thermal catalytic cracking of residual fat show bio-oils yields from 55.55 to 30.22 (wt.%), aqueous phase yields between 2.83 and 3.19 (wt.%), solid phase yields between 13.56 and 9.75 (wt.%), and gas yields from 27.89 to 55.60 (wt.%). The yields of bio-oil decreases from 74.41 to 30.22% (wt.) with increasing catalyst-to-Tallow kernel oil ratio, while that of gaseous phase increases from 12.87 to 55.60% (wt.). For all the thermal and thermal catalytic cracking experiments, the density, kinematic viscosity, and acid value of bio-oils decreases as the reaction time increases varying from 0.9266 to 0.8220 g/cm³, 8.10 to 2.24 mm²/s, and 144.14 to 2.37 mg KOH/g. The GC-MS of liquid reaction products identified the presence of hydrocarbons (alkanes, alkenes, ring-containing alkanes, ring-containing alkenes, and aromatics) and oxygenates (carboxylic acids, ketones, esters, alcohols, and aldehydes). For all the pyrolysis and catalytic cracking experiments, the hydrocarbon selectivity in bio-oil increases with increasing reaction time, while those of oxygenates decrease, reaching concentrations of hydrocarbons up to 95.35% (area.). The best results for the physicochemical properties density, kinematic viscosity, and acid value were 0.8220 g/cm³, 3.03 mm2/s, and 2.37 mg KOH/g, respectively, with a maximum hydrocarbon concentration of 97.194% (area.) and 2.806% ketones (area.) were obtained at 400 °C and 1.0 atmosphere, 80 minutes, without catalyst. For the catalytic cracking experiments, the maximum hydrocarbon content of 75.763% (area.) and 17.041% (area.) carboxylic acids, 4.702% (area.) ketones (area.), and 2.494% (area.) non-identified oxygenates was obtained at 400 °C and 1.0 atmosphere, 90 minutes, using a catalyst fixed bed reactor, with 10.0% (wt.) activated carbon pellets impregnated with 10.0 M NaOH as catalyst.

The focus of this work lies in the construction of monitoring system designed in the form of a patch using a long-lasting potentiometric electrolyte concentration sensor from metal electrodes, in a galvanic cell configuration Mg(s)|NaCl(aq)|Cu(s). Initially, a mathematical analysis was conducted on the expected sensor output through the Nernst equation. The experimental phase involved conducting controlled tests in the laboratory using various molar concentrations of sodium chloride (NaCl) in aqueous solution. Results showed that the electrolyte sensor allows for monitoring electrolyte levels in NaCl in the range of 0.02 to 1 M/L, with electrode lifespan exceeding 10 days. On the other hand, when patch is using human sweat during controlled exercise routines, it showed the sensor's capability for monitoring changes in the subjects' hydration levels in real time. The sensor output potential is greater than 1.7 volts when the sensor electrodes are in contact with human sweat, which is equivalent to measuring molar concentrations at normal hydration and moderately high hydration levels. Sensor results indicate that the system can function in a self-powered manner without external batteries. Additionally, the extended lifespan of its electrodes allows for continuous monitoring of imbalances in the human body, showcasing the system capability for long-term health assessment.

Introduction: Leptin and ghrelin are two hormones that play a role in weight homeostasis. Leptin, which is produced primarily by adipocytes and is dependent on body fat mass, suppresses appetite and increases energy expenditure. Conversely, ghrelin is the “hunger hormone”, it stimulates appetite and promotes fat storage. Bariatric surgery significantly alters the levels and activity of these hormones, contributing to weight loss and metabolic improvements. Clarifying the interplay between bariatric surgery, weight loss, physical exercise, leptin, and ghrelin is essential for developing comprehensive strategies for optimizing long-term outcomes for candidates for bariatric surgery, especially sarcopenic patients. Methods: This was a randomized controlled study with two groups (n=22). The patients in both groups have obesity and sarcopenia. A Roux-en-Y-gastric bypass (RYGB) procedure was performed in all patients. The intervention group participated in a structured exercise program three times per week beginning one month after surgery and lasting 16 weeks. Patient assessment was performed before surgery (baseline) and after completion of the exercise program. The control group received the usual standard of care and was assessed similarly. Results: After surgery, weight, BMI and lean mass decreased significantly in both groups from baseline to the second assessment. Leptin was not significantly different from baseline to the second assessment in the physical exercise group but was significantly lower in the control group (p=0.05). Ghrelin increased over time in both groups, but the differences were not significant. When we associated leptin (the dependent variable) with weight (the independent variable), we found that lower weight was associated with lower leptin levels. A similar relationship was also observed between leptin and sarcopenia parameters (muscle strength and mass), as well as with bone health parameters (bone mineral density and t-score). Higher ghrelin levels were significantly associated with higher t-scores and z-score (p

Continuous glucose monitoring devices allow diabetes condition management. However, when limited data is available, one option is to increase their size by generating synthetic samples. From a homemade wearable prototype was created a real dataset with 18 instances and 53 attributes that capture characteristics of capillary and venous blood glucose, oxygen concentration, pulse rate, skin temperature, and 24 modules and 24 phases related to bio-impedance. The objective of this article is to generate synthetic datasets, and also it investigates the ideal features subset and optimal model for non-invasive diabetes prediction. Gaussian-Copulas (GC), conditional generative adversarial networks (CG), variational autoencoders, and Copula-GAN techniques' were used to generate five synthetic datasets. Experiments show that GC1 and GC2 datasets follow min/max boundaries and are not copies of the original data. Multilayer perceptron regressor outperformed (train and test) with 2.17, 2.51 in MAE; 9.29, 13.59 in MSE; 3.05, 3.69 in RMSE, and 0.95, 0.92 in R2 in GC1, and 2.64, 3.02 in MAE; 11.43, 15.11 in MSE; 3.38, 3.89 in RMSE, and 0.94, 0.92 in R2 in GC2 with eight features. Future work is necessary to explore autoencoder and generative architectures, datasets with diverse characteristics, and the effect of the number of features.

Chronic non-communicable diseases (NCDs) are major public health problems and a significant financial burden on public health systems. By 2030, mortality due to NCDs, such as cardiovascular diseases, cancer, respiratory diseases, and diabetes, is predicted to increase in Brazil. A peculiar aspect of NCDs involves their long-term and integrated care management. This paper proposes a chronic disease management platform based on artificial intelligence to deliver digital health services everywhere. The proposed platform is anchored and built with healthcare 4.0 technologies, such as wearable devices, the internet of medical things, and artificial intelligence cloud-based solutions that allow the deployment of a smart healthcare system. In addition, the paper presents the feasibility of the platform in a diabetes prediction study case. For the study case, an initial dataset was established with bio-impedance, oxygen concentration, pulse rate, skin impedance, and skin temperature attributes. A baseline was implemented with ten regression models to assess the prediction performance of the mean squared error, root mean squared error, and r-squared score to compare predictive findings with capillary blood glucose measurements. Results evidence that the decision tree regressor and three ensemble methods (bagging decision tree regressor, random forest regressor, and AdaBoost regressor) yielded improvement over the other models. Moreover, a comparison among those models revealed that the decision tree regressor outperforms them and presents promissory outcomes.

This paper examines the diurnal cycle of convection (DCC) over Lake Titicaca Basin (LTb) during summertime months based on the high spatial resolution (8 x 8 km2) and hourly temporal resolution, estimates of Climate Prediction Center Morphing technique (CMORPH). Analysis was performed using observed data from rain gauges (Rg-SENAMHI) for the period 2002 to 2013. Graphical comparisons and several statistical metrics such as correlation coefficient, bias, and root mean square error were used to evaluate CMORPH product. Spatial maps and graphic metrics of diurnal cycle were developed to assess CMORPH data, spatial dependency an accuracy over the LTb. Approximately, 43% of the total Rg-SENAMHI variation is explained CMORPH data. The correlation between Rg-SENAMHI and CMORPH is positively over southeast and northern LTb, and negatively in the central and southern LTb. A underestimation bias is observed over most the LTb areas and overestimation bias (e.g., Lagunillas, Isla Suana and Desaguadero stations). In general, spatial patterns of rainfall over the LTb were captured through CMORPH data. Over the surrounding lake area, high mountain, and plateau area, maximum peaks of precipitation occur in the early evening, neverhtheless over low areas such as the lake, surrounding and valleys, maximum precipitation values occur early morning. The results show that DCC its very related by surface exchange processes and local circulation resulting from solar radiation and heterogeneous topography.

Alkaline and alkaline-thermal activation were used in an attempt to synthesize zeolites using the sedimented illite fraction of raw Devonian clays from the Kuprava clay pit in Latvia. The Si/Al molar ratio of these clays is 2.79. Thermal and hydrothermal treatments were conducted using 6M and 10M NaOH solutions, along with different curing environments. The treated samples were analyzed using XRD, FTIR, and SEM, and were compared to the raw and calcined illite fraction samples. The main phase that forms after alkaline treatment is hydrosodalite (Na8[AlSiO₄]₆(OH)₂∙2H₂O). Using a higher concentration of NaOH leads to a significant increase in hydrosodalite formation. Increasing the curing temperature from 120°C to 600°C slightly reduces hydrosodalite formation due to the crystallization of the nepheline (Na₃K(Al₄Si₄O₁₆)) phase. This phase forms relatively intensively when the chemically treated samples are cured in a nitrogen environment at 600°C, thereby reducing the formation of hydrosodalite. The characteristic layered-fused structure of clay minerals remains in all chemically treated samples when cured at 600°C in air, but it does not remain when cured at the same temperature in nitrogen. The intensive formation of hydrosodalite is mainly achieved through hydrothermal treatment, along with a primary treatment using 10M NaOH. Considering the calculated size of the crystallites, treatment with 6M NaOH and curing at 120°C can also be seen as beneficial for hydrosodalite formation.

Applying a procedure similar to that of E.S. Bring, by using a 4^th degree Tschirnhaus transformation, it was possible to transform the Bring-Jerrard normal quintic (BJQ) equation into a De Moivre form (DMQ), so that it could be solved by radicals. The general solution by radicals of the De Moivre equations of any degree is presented. By the same procedure the BJSx (normal sextic) equation was taken to another one without the 2^nd, 4^th and 6^th terms which was transformed into a cubic (solvable) equation. By applying a 6^th degree Tschirnhaus transformation to the BJSp (normal septic) equation its binormal (without the 2^nd, 3^rd, 4^th and 5^th terms) form was obtained.

Applying a procedure similar to that of E.S. Bring, by using a 4^th degree Tschirnhaus transformation, it was possible to transform the Bring-Jerrard normal quintic (BJQ) equation into a De Moivre form (DMQ), so that it could be solved by radicals. The general solution by radicals of the De Moivre equations of any degree is presented. By the same procedure the BJSx (normal sextic) equation was taken to another one without the 2^nd, 4^th and 6^th terms which was transformed into a cubic (solvable) equation. By applying a 6^th degree Tschirnhaus transformation to the BJSp (normal septic) equation its Bring-Jerrard binormal (without the 2^nd, 3^rd, 4^th and 5^th terms) form was obtained.

The use of pesticides such as rotenone can lead to toxicity, dysfunction and neuronal death in humans. The Copaifera Reticulata Ducke Oil-Resin (CPOR) is widely used by the natives of the Amazon, however, studies on its potential neuroprotective effect are lacking. This study investigated the cytoprotective effect of CPOR on total cell cultures of the ventral midbrain (VMC), hippocampus (HC) and cerebral cortex (CCC) exposed to rotenone at different concentrations. The total cell cultures of VMC, HC and CCC were exposed for 72 or 24 hours to rotenone, CPOR and rotenone + CPOR. Cell viability was measured using the MTT test and compared using one-way ANOVA. Exposure to rotenone reduced the cell viability of CMV, HC and CCC. Exposure to CPOR reduced the cell viability of CMV. The cell viability of CMV exposed simultaneously to rotenone and CPOR was higher compared to rotenone alone. The cell viability of HC exposed simultaneously to rotenone and CPOR was higher than that exposed to rotenone. CMVs are more vulnerable to rotenone toxicity and more sensitive to CPOR. Considering simultaneous exposure, CPOR revealed a possible neuroprotective effect against rotenone damage only for VMC and HC.

The epidemiological and clinical pathological aspects of polioencephalomalacia (PEM) in five buffaloes (buffaloes 01 to 05) in the amazon biome are described. Epidemiological data were obtained during the clinical visit in which the animals with clinical signs compatible with polioencephalomalacia were submitted to a general and specific clinical examination of the nervous system. During the necropsy of the five animals, the intensity and location of the lesions were evaluated and fragments from different organs were collected and fixed in 10% buffered formalin and sent to the Pathological Anatomy Sector of the Federal Rural University of Rio de Janeiro for histopathological examination. Of the five studied animals, all were of the Murrah breed, four male and one female, with ages ranging from two months to one year. Two buffaloes (buffalo 01 and 02) were from the municipality of Castanhal, Pará, kept in an extensive breeding system on Urochloa brizantha pasture. Buffaloes 03 and 04 belonged to a property located in the municipality of Cachoeira do Arari, Marajó Island, Pará, and buffalo 05 was from a property located in the municipality of Itaubal, state of Amapá, all of them were raised in an extensive system in flooded of native pasture. At the clinical examination, all buffaloes had a body score between 2.5 and 3 (scale from 1 to 5), and there was noted decreased alertness, postural changes, marked hypermetria when stimulated to move, total or partial blindness demonstrated by colliding to the corral structures, head pressing and circumduction of the hindquarters when supported on the forelimbs, opisthotonos, muscle tremors, convulsions, paddling movements, sialorrhea, decrease in palpebral and pupillary reflexes and eyeball rotation placing the pupillary slit in a vertical position. At necropsy, mild lesions characterized by edema and flattening of the cerebral convolutions were observed. Histopathological examination showed laminar necrosis of the cerebral cortex. The diagnosis of polioencephalomalacia was based on epidemiological, clinical-pathological, and histopathological findings, similar to findings in other ruminants. The cause of polioencephalomalacia in the studied buffaloes was not established, which indicates the need for further studies to elucidate this disease in the species, mainly in the Amazon region.

Chagas disease (CD), caused by Trypanosoma cruzi, is a neglected tropical disease prevalent in Latin America. The treatment of infected patients is aimed at eliminating the parasite, reducing the risk of cardiomyopathy, and interrupting the disease transmission cycle. At present, the World Health Organization only recognizes benznidazole (BZ) and nifurtimox as effective drugs for treating CD. However, both present low cure rates in the chronic phase and often have serious side effects. T. cruzi infection produces an intense inflammatory response in several tissues, critical for controlling parasite proliferation and CD evolution. Compounds that liberate nitric oxide (NO) (NO donors) have been used as therapeutic agents against T. cruzi. However, to date, there is no evidence about the related nitrogen oxide, nitroxyl (HNO) on the outcome of T. cruzi infection. In this study, we investigated the effect of the HNO donor Angeli's salt (AS) on C57BL/6 mice infected with T. cruzi (Y strain, 5 × 103 trypomastigotes, i.p.). The use of AS showed positive results, such as a decrease in the number of parasites present in the bloodstream and in nests within the heart, as well as improved the protective antioxidant capacity of erythrocytes in infected animals, leading to an overall decrease in the severity of the disease. Furthermore, in vitro experiments showed that AS treatment reduced parasite uptake and the release of trypomastigotes by macrophages. Taken together, these findings from both the mouse model and in vitro testing suggest that AS could be a promising therapy for CD.

Diabetes is a prevalent global health issue associated with significant morbidity and mortality. Diabetic retinopathy (DR) is a well-known inflammatory, neurovascular complication of diabetes and a leading cause of preventable blindness in developed countries among working-age adults. However, the ocular surface components of diabetic eyes are also at risk of damage due to uncontrolled diabetes, which is often overlooked. Inflammatory changes in the corneas of diabetic patients indicate that inflammation plays a significant role in diabetic complications, much like in DR. The eye´s immune privilege restricts immune and inflammatory responses, and the cornea and retina have a complex network of innate immune cells that maintain immune homeostasis. Nevertheless, low-grade inflammation in diabetes contributes to immune dysregulation. This article aims to provide an overview and discussion of how diabetes affects the ocular immune system’s main components, immune-competent cells, and inflammatory mediators. By understanding these effects, potential interventions and treatments may be developed to improve the ocular health of diabetic patients.

This paper presents additional results of the generalized bathtub model for urban networks, including a simpler derivation and exact solutions for uniformly distributed trip lengths. It is shown that in steady state this trip-based model is equivalent to the more parsimonious accumulation-based model, and that the trip-length distribution has merely a transient effect on traffic dynamics, which converge to the same point in the macroscopic fundamental diagram (MFD). To understand the statistical properties of the system, a queueing approximation method is proposed to compute the network accumulation variance. It is found that (i) the accumulation variance is much larger than predicted by traditional queueing models, due to the nonlinear dynamics imposed by the MFD, (ii) the trip-length distribution has no effect on the accumulation variance, indicating that the proposed formula for the variance might be universal, (iii) the system exhibits critical behavior near the capacity state where the variance diverges to infinity. This indicates that the tools from critical phenomena and phase transitions might be useful to understand congestion in cities.

In the area of health, namely hospitals, we can agree that the intrinsic need to have multidisciplinary teams, highly specialized and indispensable resources leads us to a degree of complexity that requires, daily, the best performance, not running away from the logistics area to the rule. The centralization of resources, namely distribution warehouses, emerges as a challenge and possible solution for health institutions to respond in the best possible way to their main purpose: to put the right material in the right place at the right price in the right time space. As regards the advantages of this type of organization, there are several authors who argues that the need for human resources training, ease of coordination and the use of economies of scale are the main advantage. As far as the disadvantages are concerned, there is no special agreement on them, there are disparate factors from author to author, such as: routine, centralization, objectives or operation costs.

Wireless power transfer promises to revolutionize the way we use and power mobile devices. However, low transfer efficiencies prevent this technology from seeing wide scale real-world adoption. The aim of this work is to use quasioptics to develop a system composed of a dielectric lens fed by a phased array to reduce spillover losses, increasing the beam efficiency, while working on the antenna system’s Fresnel zone. The DC-RF electronics, digital beamforming and beam-steering by an FPGA, and radiating 4x4 microstrip patch phased array have been developed and experimented upon, while the lens has been designed and simulated. This paper details these preliminary results, where the phased array radiation pattern was measured, showing that the beam is being generated and steered as expected, prompting the lens construction for the complete system experimentation.

Life Cycle Assessment (LCA) is a technique developed to measure possible environmental impacts during the manufacture and use of a given product or service. Additive Manufacturing (AM) has proven to be suitable in several industries, especially wire and arc additive manufacturing (WAAM), offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and equivalent CO₂ emissions (CO₂e). This study aimed to develop a methodology to evaluate environmental indicators during the life cycle assessment, from gate-to-gate, in the production of two low-alloy carbon steel metal parts (flanges) using ER-90 wire and allowed identifying the main stages that most influence environmental indicators. The total energy consumption in the production of flanges 1 and 2 were, respectively, 10,239.0 MJ, 12,754.0 MJ and the total carbon footprint, respectively, 714.1 kgCO₂e kg^-1 and 749.3 kgCO₂e kg^-1.

The COVID-19 pandemic, has underscored the critical importance of sustainability across various sectors, particularly within the global economy and corporate responses to pandemic-induced challenges. Companies worldwide have grappled with unprecedented financial and operational hardships, pushing some to the brink of closure. A crucial dimension of sustainability in this context pertains to corporate financing policies. Analyzing how the pandemic has impacted these policies reveals significant insights. Government support has been instrumental in mitigating pandemic-induced disruptions, but often proved insufficient for severely affected companies. Companies, seeking financial resilience, turned to state-guaranteed lines of credit as a lifeline. Additionally, moratoriums on existing credits provided temporary relief, but long-term consequences, particularly regarding corporate indebtedness. As companies adapted financing strategies, corporate indebtedness increased. Coupled with rising interest rates in late 2022, corporate financing costs surged, emphasizing the need for sustainable financial approaches addressing both short-term crises and long-term stability. In conclusion, corporate sustainability during the ongoing COVID-19 pandemic necessitates a comprehensive approach. Governments must provide adequate support, companies should pursue sustainable financing solutions, and a careful consideration of the long-term consequences of financial policy changes is essential. Prioritizing sustainability in the corporate sector prepares businesses for future crises while safeguarding global economic stability.

In 2011, it was reviewed that there is a strong co-occurrence between major depression and chronic fatigue syndrome (CFS), with fatigue and physio-somatic symptoms being key symptoms of depression, and depressive symptoms appearing during the course of CFS. Moreover, the comorbidity between both conditions may in part be explained by activated immune-inflammatory pathways, including increased translocation of Gram-negative bacteria and increased levels of pro-inflammatory cytokines, such as interleukin (IL)-1. Nevertheless, the possible involvement of activated microglia in this comorbidity has remained unclear. This paper aims to review microglial disturbances in major depression, CFS and their comorbidity. A comprehensive literature search was conducted using the PubMed / MEDLINE database to identify studies that are relevant to this current review. Depressed patients present neuroinflammatory alterations, probably related to microglial activation, while animal models show that a microglial response to immune challenges including lipopolysaccharides is accompanied by depressive-like behaviors. Recent evidence from preclinical studies indicate that activated microglia have a key role in the onset of fatigue. In chronic inflammatory conditions, such as infections and senescence, microglia orchestrate an inflammatory microenvironment thereby causing fatigue. In conclusion, based on our review we may posit that shared immune-inflammatory pathways and activated microglia underpin comorbid depression and CFS and that activated microglia are the main orchestrators of this comorbidity. As such, microglial activation and neuro-inflammation may be promising targets to treat the overlapping manifestations of both depression and CFS.

In ref. [1], we pointed out that certain anomalies observed in the published data for ac magnetic susceptibility of a room temperature superconductor reported in Nature 586, 373 (2020) [2] would be cleared up once the measured raw data were made available. Part of the measured raw data were recently posted in arXiv:2111.15017 [3]. Here we report the results of our analysis of these raw data and our conclusion that they are incompatible with the published data. Implications of these results to the claim that the material is a room temperature superconductor are discussed.

One of the most broadly used models for membrane fouling is the Hermia model, which separates this phenomenon into four blocking mechanisms, each with an associated parameter n. These mechanisms are complete blocking (n=2), intermediate blocking (n=1), standard blocking (n=3/2), and cake formation (n=3/2). The original model, which was obtained through experimental data, is given by an Ordinary Differential Equation (ODE) dependent on n. At the time, this ODE was only solved for these four values of n, which limits the effectiveness of the model when adjusted to experimental data. This paper aims to not only mathematically prove the original Hermia model but also to broaden the scope of this model for any real number n by using the original ODE, the equations of fluid mechanics, and the properties of single and multivariable calculus. The extended Hermia model (EHM) is given by a power law for any n≠2 and is given by an exponential function at n=2. To better test the model, we have performed the model fitting of the EHM and compared its performance to the original four pore-blocking mechanisms in 6 micro- and ultrafiltration examples. In all examples, the EHM performed consistently better than the four original pore-blocking mechanisms. Changes in the blocking mechanisms concerning transmembrane pressure (TMP), crossflow rate (CFR), crossflow velocity (CFV), membrane composition, and pretreatments are also discussed.

A Robust Optimization framework with original concepts and fundamentals also admitting a fusion of ideals from relative regret models and static robust optimization, containing conservatism concepts is disclosed. The algorithm uses a fine-tune strategy to tune the model so the robustness and a target ideality can be mutually achieved with a specified risk. The framework comprises original concepts, a mathematical approach and an algorithm. The statistical treatment of the data with the original concepts from the framework make it able to make short, middle or long-term decision-making setting. The framework has high tractability since the algorithm forces the creation of a setting that makes a robust optimization with the specified risk. The framework can be applied in linear and nonlinear mathematical models since that the objective function is monotonic in the domain of the active convex region. Several examples are solved to best understand the framework and all results demonstrated high tractability and performance. There is a wide range of applications. Along all the text, there is a profound discussion about its philosophy, objective, original concepts, fields of application, statistical and probabilistic fundamentals.

The pandemic of Covid-19 has contributed to the increase of the number of cases of anxiety, depression, and stress, especially in vulnerable workers. The objective of this study was to analyze factors associated with mental health of waste pickers and street sweepers in Brasília, Brazil, during the Covid-19 pandemic. It was a cross-sectional cohort study with a quantitative approach. SRQ-20 test was used to assess mental health. The study sample included 886 workers: 601 street sweepers and 285 waste pickers. Of the total, 71 workers (8.0%) had SRQ-20 ≥ 7, which is equivalent to adverse mental health. The characteristics associated with adverse mental health were women (PR: 3.36; 95%CI:1.86;6.08), worker between 18-39 years old (PR: 2.19; 95% CI 1.32;3.65), waste pickers (PR: 1.65; 95%CI:1.01;2.70), worker who reported two (PR: 3.24; 95%CI:1.72; 6.12), three or more (PR: 4.73; 95%CI:2.40;9.32) health problems. For the symptoms, 17.05% of the people interviewed said they felt sad and 18.25% nervous, tense, and worried. Female waste pickers, young adults, with many health problems were more susceptible to adverse mental health and it doesn't just affect them, but also their families. Public policies are needed to protect these professionals so that they can work safely and establish early interventions to maintain these workers' mental integrity.

The number of physical devices connected to the Internet such as vehicles, household appliances and other "things" has been steadily increasing in recent years, thus forming the basis for the Internet of Things (IoT). IoT ecosystem extends beyond country borders and application domains, combining thousands of versatile devices that differ in terms of their structures, capabilities, and available resources. It is therefore not surprising that the landscape of wireless communication technologies and the degree of IoT devices available today is excessively broad and diverse. Interference between networks leads to frame collisions and consequent packet loss. Frame collisions occur when two or more packets overlap in time and frequency and use the same LoRa parameters, i.e. the same spreading factor (SF), bandwidth (BW) and carrier frequency (CF). When most devices use the same configuration, collision probability is higher. The probability of frame collisions is also affected by traffic characteristics, particularly the periodicity of the transmission and the payload size. Larger payload sizes and more frequent transmissions accumulate with higher time on air (ToA) and channel occupancy [1]. Transmission powers and the location of the gateways also influences this situation. The aim of this experimental work is to verify the effects of collisions and interference in LoRaWAN, regarding the periodicity of transmissions and the payload sizes. The hardware used is an Arduino board programmed in C/C++, a LoRa Bee module operating at a frequency of 868 MHz and a LoRaWAN LG02 gateway. Different scenarios were tested in an outdoor environment, with Line of Sight and Non-Line of Sight, and different variables such as: SFs equal to 7, 9 and 12; distances of 20, 40 and 60 meters and different data sizes of 14, 32 and 51 bytes, over the same channel. The packets with different SF’s and different data sizes were transmitted in a (pseudo) random way, one after the other, overlapping different SFs in the same channel and testing this way (theoretical) orthogonality among them. By fixing the bandwidth in 125 kHz, and testing different SFs we intend to increase the probability of cause packet loss by applying to our connection a combination of emitted power/short distance that leaves an interference power received, strong enough [2] for the effect. We validate our conclusions by analyzing ToA according with RSSI and different data sizes, the RSSI for different SFs and different data sizes and finally the packet loss through the PDR-Packet Delivery Ratio for a better understanding of the reliability of packet transmission in our link.

After the ban on tributyltin-based antifouling paints, DCOIT (4,5-Dichloro-2-octylisothiazol-3(2H)-one) became one of the most used antifouling biocides. DCOIT is a pseudo-persistent contaminant in port areas and is toxic to non-target species, but its ability to bioaccumulate and be transferred along the trophic chain remains unknown. This study aimed to preliminarily investigate the bioaccumulation, trophic transfer, and biomagnification of DCOIT and SiNC-DCOIT (DCOIT immobilized in silica mesoporous nanocapsules) from the microalga Tetraselmis chuii to the mussel Mytilus galloprovincialis during exposure experiments considering 24 h of uptake followed by 72 h depuration. Mussels rapidly internalized and metabolized both DCOIT and SiNC-DCOIT. The predator-prey biomagnification factors (BMFTL) suggested that both forms of the biocide can be trophically transferred, with higher concentrations of DCOIT and SiNC-DCOIT in mussels than in microalgae (BMFTL &gt; 1). However, the bioaccumulation and bioconcentration factors indicated a low bioaccumulation capability in the short term, suggesting that the depuration rate overcomes the uptake. Our findings contribute to the development of environmental risk assessments for DCOIT and SiNC-DCOIT, but do not exclude the possibility of DCOIT bioaccumulation in the long-term in areas with constant input of DCOIT. Further studies are needed to understand these processes under continuous exposure scenarios to DCOIT.

Maghemite (γ-Fe2O3) is a mineral formed from magnetite oxidation at low temperatures, an intermediate metastable term of the magnetite to hematite oxidation and could be mixed with both. It has magnetic susceptibility similar to magnetite, crystal structure close to magnetite with which it forms a solid solution, while compositionally it equals hematite. Maghemite is thus easily misidentified as magnetite by X-ray diffraction and/or as hematite by spot chemical analysis in iron ore characterization routines. Nonstoichiometric magnetite could be quantified in samples of Brazilian soils and iron ores by the Rietveld method using a constrained refinement of the X-ray patterns. The results were confirmed by reflected light microscopy and Raman spectroscopy, thus qualitatively validating the method. X-ray diffraction with the refinement of the isomorphic substitution of Fe2+ by Fe3+ along the magnetite-maghemite solid solution could help to suitably characterize maghemite in iron ores, allowing for the evaluation of its ultimate influence on mineral processing, by affecting its surface and breakage properties.

This work presents a new algorithm to resolve the problem of distribution network reconfiguration using the Tabu Search metaheuristic and voltage drop. The proposed method presents a different way to obtain the initial solution using the voltage drop, as well as a new way to generate a neighborhood of candidate solutions, based on randomness and the voltage drop, to perform a smooth and steady descent execution of the algorithm. The proposed algorithm has the main objective to reduce the active power losses in distribution networks, but it also achieves an refinement in the voltage profile. The proposed method was tested in two distribution systems, the 33-Bus and 94-Bus systems, commonly found and tested in the literature. The results of the tests show that the proposed method presents a low computational cost, achieves good solutions, and is better than the other methods found in the literature.

This paper has a twofold objective. The first aim is to present a comprehensive bibliographical analysis of journal articles and book chapters on fuzzy-random option pricing (FROP) over the WoS and SCOPUS databases. It follows PRISMA criteria and takes special care of developments in continuous time. Thus, we described the principal findings about the research streams, outlets and authors of this topic and lets us suggest further research. The second contribution is motivated by the fact that the bibliographical revision has identified a lack of developments on equilibrium models on the yield curve. This question motivates extending Vasicek’s yield curve equilibrium model to introduce fuzziness in the parameters that govern interest rate movements (speed of reversion, equilibrium short-term interest rate, and volatility). Likewise, this paper develops an empirical application on the term structure of fixed income public bonds with the highest credit rating in the Euro area.

Advanced cutaneous melanoma is considered the most aggressive type of skin cancer with variable rates of treatment response. Nowadays, there are available some classes of immunotherapy and target therapy for its treatment. Immunotherapy can inhibit tumor growth and its recurrence by triggering host's immune system, while targeted therapy acts inhibiting specific molecules or signaling pathways. However, melanoma response to these treatments are highly heterogenous, and frequently become resistant. Epigenome (DNA/histone modification) contribute to cancer initiation and progression. Epigenetic alterations are divided into four levels of gene expression regulation: DNA methylation, histone modification, chromatin remodeling and non-coding RNAs regulation. The deregulation of lysine methyltransferase enzymes is associated with tumor initiation, invasion, development of metastases, changes in immune microenvironment and drug resistance. The study of lysine histone methyltransferase (KMT) inhibitors is important to cancer epigenetic mechanisms understanding and to biological processes. In addition to immunotherapy and target therapy, the research and development of KMT inhibitors is ongoing. Many studies are exploring the therapeutic implications and possible side effects of these compounds, besides their adjuvant potential to the approved current therapies. Importantly, as with any drug development, safety, efficacy, and specificity are crucial considerations when developing KMT inhibitors for clinical applications.

Alzheimer's disease still holds many mysteries that are yet to be revealed. Exploring the reasons behind the increase in suicidal behavior in patients undergoing promising treatments for Alzheimer's disease is a scientific endeavor. Research practices must be built upon strong theoretical frameworks that can guide the investigation. Throughout decades of professional experience in caring for suicidal individuals and elderly people with cognitive disorders, we have noticed a connection that requires further exploration. It seems that existential distress may trigger various outcomes. At one end of the spectrum, we observe individuals who strongly resist adverse situations, making them more prone to developing suicidal behaviors. At the other end, we see individuals who exert great biological effort to adapt to the ongoing stresses of life, with Alzheimer's disease being a neurological consequence of this adaptation. To develop our understanding, we conducted an existentialist analysis to conceptualize the underpinnings of the human experience in a stress-filled world.

This study examines the feasibility of using event-related potentials (ERPs) obtained from electroencephalographic (EEG) recordings as biomarkers for long-term memory item classification. Previous studies have identified old/new effects in memory paradigms associated with explicit long-term memory and familiarity. Recent advancements in convolutional neural networks (CNNs) have enabled the classification of ERP trials under different conditions and identification of features related to neural processes at the single-trial level. We employed this approach to compare three CNN models with distinct architectures using experimental data. Participants (N = 25) performed an association memory task while recording ERPs that were used for training and validation of the CNN models. The EEGNET-based model achieved the most reliable performance in terms of precision, recall, and specificity compared with the shallow and deep convolutional approaches. The classification accuracy of this model reached 70% for known items and 62% for unknown items. Good overall accuracy requires a trade-off between recall and specificity and depends on the architecture of the model and the dataset size. These results suggest the possibility of integrating ERP and CNN into online learning tools and identifying the underlying processes related to long-term memorization.

The objective of this research was to study the drying kinetics of passion fruit seeds, which are a byproduct of the industrial processing of passion fruit, with the potential to produce byproducts such as oil and flour. After drying, the seeds were directed for cold-press oil extraction, and the quantification of fatty acids was performed. Following the oil extraction, the residues underwent a grinding process to produce flour, which was characterized in terms of its nutritional aspects. The drying process was conducted using an experimental forced convection dryer with controlled temperatures of 40, 50, 60, and 70 °C, and a drying air velocity of 1.5 m s-1. This work introduced a novel approach using mathematical models, all derived from Fick's equation. For each model, the activation energy and thermodynamic properties related to the drying procedure were determined. Fatty acids in the oils and physicochemical characteristics of the defatted residue's flour were also analyzed. The Cavalcanti Mata, Henderson &amp; Pabis, and Page models modified by Cavalcanti Mata were found to best fit the experimental data. The highest proportions of unsaturated fatty acids in passion fruit oil were linoleic acid (Omega-6) at 68.8% and oleic acid (Omega-9) at 16.1%. The predominant saturated fatty acid was palmitic acid at 10.61%, with no significant differences observed in relation to the drying temperatures. It can be concluded that the composition of the flour from the residue of passion fruit grain oil extraction varies in terms of crude fiber content, ranging from 56.36% to 58.8%, and protein content, ranging from 15.6% to 18.26%, with significant differences observed concerning the drying temperatures. The lipid content varied from 13.5% to 13.76%, with no significant differences observed across the evaluated drying temperature variations.

Biodiversity conservation questions human practices towards biodiversity and, therefore, largely conflicts with ordinary societal aspirations. Decisions on the location of protected areas, one of the most convincing conservation tools, reflect such a competitive endeavor. Operations Research (OR) brings a set of analytical models and tools capable of resolving the conflicting interests between ecology and economy. Recent technological advances have boosted the size and variety of data available to planners, thus challenging conventional approaches bounded on optimized solutions. New models and methods are requested to use such a massive amount of data in integrative schemes addressing a large variety of concerns. Here, we provide an overview on the past, present and future challenges that characterize spatial conservation models supported by OR. By enlarging the spatial, temporal, taxonomic and societal horizons of biodiversity conservation planners navigate around multiple bio-socioeconomic equilibria and are able to decide on cost-effective strategies to improve biodiversity persistence.

Vagueira Beach on the Central Portuguese coast, is known as one of the places in Europe most affected by coastal erosion. The area has suffered more than 156 meters of coastline retreat over the period 1958 to 2001. With the aim to evaluate the influence of local factors on coastal erosion, this paper assesses the anthropogenic and natural factors that are related with the retreat of the coastline, by adopting statistical correlation and regression analyses. Through the Pearson's correlation coefficient (r) it was observed that local factors such as annual dredging at the Aveiro Port entrance (r = 0.93), the total length of groins in the Espinho-Vagueira section (r = 0.89), and storm events (r = 0.52) are directly related to coastline retreat in the area. A multiple linear regression model was developed in which coastline retreat is explained by these same factors over the period 1980 to 2006. With a coefficient of determination of R² = 0.91, it was observed that length of groins (significant at the 1% level), dredging of the port entrance (significant at the 5% level) and precipitation (as a proxy for storm events; significant at the 10% level) are significantly correlated with coastline retreat. Hence, it is shown that anthropogenic factors are the main drivers of coastline retreat in Vagueira Beach. This study provides an innovative approach for the assessment of coastal erosion, resulting in important information that can be used for decision-making related to coastal zone management as it allows to understand in greater detail the main drivers of coastal erosion.

Pathogens and adulterants in human feeding consumables can be readily identified according to their electrical properties. Electrical bioimpedance analysis (BIA) has been widely used for body contents characterization, such as blood, urine, lactate and sweat. If the blood glucose concentration alters the electrical properties of the blood medium, then the impedance spectrum obtained by BIA can be used to measure glycemia. In some applications, artificial neural networks allows the correlation of these parameters (impedance and glucose concentration) by means of symbolic and statistical rules. According to our literature review, there is any physical model that allows the interpretation of the relationship between blood’s electrical properties, obtained by BIA, and the concentration of glucose in the blood plasma. This article proposes a simplified physical model for blood electrical conductivity as a function of glucose concentration, based on Bruggeman’s effective medium theory. The equations of this model were obtained considering an insulating phase distribution diffused in a conductive matrix, in which red blood cells are represented by macroscopic insulating nuclei and glucose molecules by microscopic insulating particles. The impedance spectrum for different glucose concentrations (4.0 to 6.8 mmol/L) in a blood sample, published by Kamat Bagul (2014), were compared with the proposed model. The results showed a significant correlation with the experimental data, showing a maximum error of 5.2%. The proposed model might be useful in the design of noninvasive blood glucose monitoring systems.

Studies on the influence of dietary components and their effects are fundamental for nutrigenomics, or the study of how nutrients can be cellular sensors, how they affect biological processes and gene expression in different tissues. Lipids are an important source of fatty acids (FA) and energy and are fundamental to biological processes and influence the regulation of transcription. Pigs are excellent model to study nutrigenomics, particularly lipid metabolism because the deposition and composition of FA in their tissues reflect the composition of FA in their diet. Recent studies show that FA supplementation is important in production systems, such as growing and finishing pigs, as it can improve the energy value of the feed, help reduce costs, improve animal welfare, and influence the nutritional value of the meat. Studies show that oleic (OA), linoleic (LA), docosahexaenoic (DHA), and eicosapentaenoic (EPA) acids are associated with the regulation of transcription in tissues such as muscle, liver, adipose tissue, and brain. Other studies indicate that EPA and DHA are associated with changes in specific signaling pathways, altering gene expression and biophysical properties of membranes. This review, therefore, focuses on the current knowledge of the effects of dietary FA on production traits and gene expression.

Global climate change has induced a rise in sea surface temperature (SST), although this increase is not uniform across the world. Significant variations exist between coastal and offshore waters, particularly in regions affected by upwelling processes. This study focuses on the Canary Current Upwelling System (CCUS), stretching from Northwest Iberia to Northwest Africa. High-resolution remotely sensed SST data (0.05°) from the ODYSSEA Level 4 Sea Surface Temperature Reprocessed dataset were validated with in-situ measurements and employed to establish a regional climatological baseline for 1982 – 2012. Subsequent years were compared to this baseline to construct SST anomaly maps, revealing SST changes since 2012. The study area was further divided into sub-regions for comparative analysis. Results indicate that SST consistently increased at a higher rate offshore compared to the adjacent nearshore regions. A reference dataset spanning 1951 – 1981 was used to gauge SST variability between the two baselines. SST exhibited a 0.59°C increase from 1951 – 1981 to 1982 – 2012, with a slowing of SST trends beyond the 1982 – 2012 baseline. This research offers valuable insights into the climatological dynamics of the CCUS. These findings enhance our understanding of this critical coastal system's climatology, laying the groundwork for future investigations into evolving climate patterns in coastal regions.

The COVID-19 was described as a respiratory illness, however further studies recognize it as a complex heterogeneous multisystemic disorder. Global efforts have been proposed to combat COVID-19, emerging diverse therapeutic options, in which discovering new drug therapies, development of vaccines and drug repurposing have been considered the most promising approaches to fight the virus. This study aimed to repurpose known drugs for use against the COVID-19, finding better therapeutic options. Seventeen biological databases were used in this study. The genetic algorithm (GA) was performed for a set of drug target classes and COVID-19 proteins as input, whose drug candidates are obtained according to the target similarities found in the target-target similarity predictive network, resulting in a drug-target interaction network. Thus, recommended drugs correspond to the union of the drug subsets found during each GA execution. Twenty-eight drugs were indicated to be the best therapeutic targets for the virus, in special, the Cyclosporine drug was administered as adjuvant to steroid treatment for COVID-19 patients which showed positive outcomes, reducing mortality in moderate and severe cases. The drugs found have used to treat other diseases, evidencing that the COVID-19 is a multisystemic disorder and suggests that the viruses’ mechanism of action presents some comorbidity with other human diseases. Evidence shows that the drugs found in this research might act together to fight the virus in a broader fashion, however further studies including in vitro and in vivo experiments are needed to find the best combination of these drugs.

Laser marking on polymer composite surfaces can be difficult to contrast and cause readability problems for electronic decoding equipment on production lines due to poor interaction between the laser and the fibres used to reinforce these materials. This problem can be solved with the right choice of marking parameters, resulting in savings for companies by avoiding production problems such as rejection, scrap and customer complaints. The present work uses the PBT/glass fibre composite used in the manufacture of instrument panels for motorcycles. The tests were carried out with different laser marking parameters using a Nd: YAG laser. Subsequently, the laser-marked DMC codes were analysed using a Verifier to evaluate the quality according to the ISO/IEC 29158:2020 standard. A detailed analysis of these surfaces was also carried out to observe some physical and chemical changes using SEM microscopy and EDS spectroscopy. The optical analysis showed that the lower the radiation power and pulse frequency and the higher the marking speed, the weaker the laser marking and therefore the poorer the DMC code quality, which was confirmed by the SEM. EDS spectroscopy showed that the laser marking process did not affect the chemical changes on the sample surface.

In South Sudan, three case-control studies found a positive association between Nodding Syn-drome (NS) and a Mansonella perstans infection. To investigate whether M. perstans could play the primary and sole causal role in the development of NS, we examined blood films of persons with and without epilepsy in rural villages affected by NS in Mahenge, Tanzania, to identify M. perstans infections. Study participants were also examined for onchocercal nodules and skin lesions and tested for the presence of anti-O. volvulus antibodies (Ov16 ELISA). One hundred and thirteen epilepsy cases and 132 controls were enrolled, with a mean age of 28.3 years (interquartile range 22 – 34 years); 125 (51%) were females. Of the persons with epilepsy, 43 (38.1%) met the probable NS criteria. M. perstans infection was absent in all participants, but Ov16 prevalence and oncho-cerciasis-associated skin manifestations were positively associated with epilepsy, including probable NS. Onchocercal nodules in the mothers of cases were also positively associated with epilepsy. In conclusion, in contrast with O. volvulus, M. perstans is likely not endemic in Mahenge and therefore cannot be a co-factor for NS in the area. Hence, this filaria cannot be the primary and sole causal factor in the development of NS.

Earthworms are iteroparous organisms with indeterminate growth, i.e. they continue to increase in size throughout their life and after completion of sexual development. Terrestrial oligochaetes vary greatly in size. Depending on the species, adult earthworms can reach between 10 mm and 3 m in length and between &lt;1 mm and &gt;25 mm in width, with most being of length 5-15 cm. Among the more than 7000 species described to date, very few (~20) reach lengths greater than 1 m. The longest earthworm on record is Amynthas mekongianus, which is found in the mud banks of the Mekong River in Southeast Asia and which reaches almost 3 m in length. It is about the same size as Megascolides australis, the ‘Giant Gippsland Earthworm’. These atypically giant earthworm species remain a scientific curiosity in terms of their biology, but they cannot be considered cases of gigantism. Gigantism occurs when organisms are much larger than normal or exhibit excessive growth. Earthworms obtain energy from the organic matter on which they feed, and their growth mainly depends on the quality of the resource and on the species, as well as on food availability, environmental factors, which can directly or indirectly affect growth by modifying food availability, and other factors such as competition. This is particularly evident in earthworms, which display indeterminate growth and large species-dependent variations in size. The biology, life cycle and growth and reproduction rates of Eisenia fetida (Savigny 1826) and Eisenia andrei (Bouché 1972), the earthworm species most commonly used in vermicomposting and vermiculture, have been widely reported. Here we present details of the enormous growth of individual specimens of Eisenia andrei and Dendrobaena hortensis reared under particular culture conditions and fed a special diet. Individuals almost 20 times the average weight of individuals of the species have been obtained. Possible explanations for this interesting phenomenon are discussed.

Parasitic capacitance represents the main error source in measurement systems based on electrical impedance spectroscopy. The capacitive nature of electrodes’ impedance in tetrapolar configuration can give origin to phase errors when electrodes are coupled to parasitic capacitances. Nevertheless, reactive charges in tissue excitation systems are susceptible to instability. Based on such a scenario, mitigating capacitive effects associated with the electrode is a requirement in order to reduce errors in the measurement system. A literature review about the main compensation techniques for parasitic capacitance was carried out. The selected studies were categorized into three groups: (i) compensation in electronic instrumentation; (ii) compensation in measurement processing, and (iii) compensation by negative impedance converters. The three analyzed methods emerged as effective against fixed capacitance. No method seemed capable of mitigating the effects of electrodes’ capacitance, that changes in the frequency spectrum. The analysis has revealed the need for a method to compensate varying capacitances, since electrodes’ impedance is unknown.