Salting influences microbial growth, enzymatic activity and biochemical reactions during ripening, thus contributing to the final quality of cheese. The aim of this study was to evaluate the influence of different salting methods (dry salting at 12, 24 and 48 h; in brine; and curd salting) on the chemical (moisture and salt content), physico-chemical (pH, titratable acidity and water activity) and sensory (texture profile analysis, colour and sensory attributes) characteristics of an industrial blue vein cheese. Dry salted cheeses had lower moisture content and water activity, and higher salt/moisture content and acidity than those salted in brine and curd. Dry-salted cheeses were also characterised by higher values for hardness, fracturability and instrumental gumminess. Dry-salted cheeses showed differences only in the red/green colour component (a*), with the curd-salted cheeses being less greenish. All cheeses scored high (around 7) in the tasters' overall impression, with the dry-salted cheeses at 12 and 24 h showing optimal growth and even distribution of mould, as well as better flavour and texture.

Anthropogenic disturbances interacting with natural disturbances, ecological and socio-economic factors can provoke forest degradation and modulate ecosystem resilience. In Haiti, protected areas recently created to reduce forest loss, require studies about forest dynamics and land use to assure the development of sustainable management policies. We combine field interview with Landsat satellite images of the Macaya National Park collected between 1985 and 2021 to investigate: 1) how much of the original forest area has been converted into agricultural or logged area since 1985; and 2) how do elevation and slope influence the expansion of human-induced land-use changes. Our results indicate an increase of 11.36% in forest cover and a reduction of 75.34% in agriculture class cover, despite the passage of seven hurricanes in the region. Forest recovery was apparently unrelated to elevation and slope, and likely reflected the implementation of new environmental laws and policies with the creation of the Macaya National Park in 1983. Restoration and protection programs contributed to ensure access to financial resources, technical assistance and new technology, thus promoting a shift into a more resilient forest system. This study brings hope for forest conservation in Haiti by showing that positive results can be achieved through inclusive collaboration.

This research demonstrates the optimization and production of biochar from barley husk (BH), corn cob (CC), and Agave salmiana leaves (AL) via pyrolysis in a muffle furnace. Taguchi experimental design (L9) was applied to conduct the experiments at different levels by altering four operating parameters. Carbonization temperature (300–500 ºC), carbonization time (30–90 min), precursor mass (2–5 g) and N₂ flow rate (100–200 cc/min) were the variables examined in this study. The effect of the parameters on the biochar yield was investigated, and the important parameters were identified employing analysis of variance (ANOVA). The optimum conditions for maximum biochar yield were: carbonization temperature of 400 ºC, carbonization time of 30 min, precursor mass of 2 g, and N₂ flow rate of 150 cc/min. The biochars produced under optimum conditions was characterized physically and chemically. Biochar yields of 19.75% for corn cob (CCB), 32.88% for barley husk (BHB), and 31.14% for agave leaves (ALB) were obtained.

Biomass is a promising alternative and renewable energy source that can be transformed into other value-added products such as activated carbon. In this research, barley husk, corn cob and Agave salmiana leaves were characterized to determine their chemical composition and morphology to evaluate their potentiality as precursors of activated carbons. Based on the main composition results obtained, the biomass samples have suitable chemical and physical characteristics to be considered as good precursors of activated carbons, such as carbon contents greater than 40%, ash content less than 10%, moisture content less than 30%, high volatile contents with values from 75 to 80% and a porous and fibrous morphology. The results indicate that the main compositions in the biomass were cellulose and lignin. The cellulose content was more than lignin (15–26%) for the residues selected. Specifically, a-cellulose contents with values from 52% to 79%, β-cellulose contents of 13–44%, γ-cellulose contents less than 11%, and holocellulose contents of 82–83% were determined. The thermal decomposition for the biomass samples proceeded with five stages attributed to the evaporation of some volatile compounds (70–150 ºC), to the degradation of hemicellulose (180–230 ºC), to the cellulose volatilization (250–350 ºC), to the lignin decomposition (380–550 ºC), and to the degradation of complex polymers and inorganic salts, respectively. The stage corresponding to the cellulose decomposition showed rapid mass decreased in the three residues. This results show that the cellulose and lignin content is another important parameter to evaluate the pyrolysis characteristics of a good precursor of activated carbon.

In the past years, consumers have increased their interest to buy healthier food products, rejecting those products with more additives and giving preference to the fresh ones. Moreover, the current environmental situation has made society more aware of the importance of reducing the production of plastic and food waste. In this way and considering the Food Industry need of reducing the food spoilage along the food chain, edible coating has been considered as an eco-friendly food packaging that can replace traditional plastic packaging providing an improvement in the product’s shelf-life. Edible coating are thin layers applied straightaway on the food materials’ surface, that are made of biopolymers that usually incorporate other elements, such as nanoparticles or essential oils, to improve their physicochemical properties. These materials must provide a barrier that can prevent the pass of water vapor and other gasses, the microbial growth, the moisture loss, and the oxidation, so the shelf-life could be extended. The aim of this review was to compile the current data available to give a global vision of the formulation process and the different ways to improve the characteristics of the coats applied in both fruits and vegetables. In this way, the suitability of compounds in by-products produced during the Food Industry chain were also considered for the edible coating production.

This study examines the prospective association of egg consumption with multiple domains of cognitive function in older, community-dwelling men and women followed 16.3 years. Participants were 617 men and 898 women from the Rancho Bernardo Cohort aged 60 and older who were surveyed about egg intake/week in 1972-74, and attended a 1988-91 research visit when cognitive function was assessed with 12 tests. Analyses showed that egg intake ranged from 0-24/week (means: men=4.23.2, women=3.52.7, p<0.0001). In men, covariate-adjusted regressions showed egg intake was associated with better performance on Buschke total (p=0.04), long-term (p=0.02) and short-term (p=0.05) recall. No significant associations were observed in women (p’s>0.05). Analyses in those <60y at in 1972-74 showed egg intake was positively associated with scores on Heaton copying(p<.04) and the Mini-Mental Status Exam(MMSE;p<.02) in men, and category fluency(p<0.05) in women. Egg intake was not significantly associated with odds of poor performance on MMSE, Trails B, or category fluency in either sex. These reassuring findings suggest there are no long-term detrimental effects of egg consumption on multiple cognitive function domains, and for men, there may be beneficial effects for verbal episodic memory. Egg consumption in middle-age may also be related to better cognitive performance later in life.

There have been a great number of investigations about the influence of weak magnetic fields on biological systems, such as isolated cells and whole organisms. This is also a subject of considerable medical concern since old epidemiologic observations have indicated a possible tumorigenic effect of these fields. Their mechanism of action, however, is not firmly established. A large number of biological effects of electromagnetic fields have been attributed either to the production of reactive oxygen species (ROS) or to the entrance Ca²⁺ in the cell. A new biochemical pathway is proposed that covers these two possibilities: the primary effect of the magnetic field would be by the mechanism of radical pairs resulting in the production of ROS; these could activate the ion channels TRPM2 producing cellular inflow of Ca²⁺, which would induce the calcium dependent effects. Thus, a large number of biological effects observed up to the present could be explained.

The etiology of Autism Spectrum Disorder (ASD) has been linked to both genetic and epigenetic factors. Among the epigenetic factors, exposure to valproic acid (VPA), an antiepileptic and mood-modulating drug, has been shown to induce characteristic traits of ASD when exposed during embryogenesis. Conversely, in animal models, Enriched Environment (EE) has demonstrated positive behavioral and neural effects, suggesting its potential as a complementary treatment to pharmacological approaches in central nervous system disorders. In this study, we utilized zebrafish to model ASD characteristics induced by VPA and hypothesized that sensory stimulation through EE could ameliorate the behavioral and neuroanatomical features associated with ASD. To test this hypothesis, we assessed social behavior, cerebellar volume, and Purkinje cell populations via histology and immunohistochemistry after exposing the fish to EE. The results revealed that zebrafish exposed to VPA exhibited social deficits, reduced cerebellar cortex volume, and a decrease in c-Fos-positive cells in the Purkinje layer. In contrast, VPA-exposed fish treated with EE showed increased socialization, augmented cerebellar cortex volume, and an elevation in c-Fos-positive Purkinje cells. These findings suggest that alterations induced by VPA may be ameliorated through EE treatment, highlighting the potential therapeutic impact of sensory stimulation in conditions related to ASD.

After approximately 6 months of age, term breastfed infants are increasingly depending on other sources of iron to avoid iron deficiency anemia. The appropriate complementary feeding must include a balance composition of foods containing an adequate amount of macro- and micronutrients to reduce the risk of iron deficiency anemia. This study aims to compare the anemia and growth status of infants receiving commercial fortified infant cereals (FIC) with infants not receiving them. We use all complete multiple Demographic Health Surveys (DHS) from 2005 to 2018 to understand global infant feeding patterns. To better control for the strong household wealth effect in nutritional choices and possibly health awareness, we use propensity score technique as applied in outcome research to better control the effect of covariates. After matching and controlling for confounders, we did find a significant association between reduced risk of anemia and consumption of FIC. After matching and adjusting for confounders the small but positive effects of consumption of FIC on Height for age z-score and Weight for Height Z-score are no longer statistically significant.

This study explores several global and country cluster sustainable development (herein SD) models. It jointly examines constructs from the “Neoliberal-turn” ((e.g., Institutional Enhancers (e.g., business freedom, property rights, government integrity, and judicial effectiveness), Financial Enhancers (e.g., government spending and monetary, trade, investment, and financial freedoms), Foreign Direct Investment, Global Competitiveness-institutions, and Global Competitiveness-innovation-sophistication)), and the “Social-turn” (five SD pillars (e.g., Planet, People, Peace, Prosperity, and Resources), which synthesize the 17 United Nations SD goals); and Happiness and Life Satisfaction (herein H&amp;LS). The study examines a large and diverse set of relationships encompassing 11 years of data of 108 social, economic, and environmental indicators from 129 countries at the global, country cluster, and country levels. We analyze data using structural equation modeling. Remarkably, Planet, an SD pillar constituted by biophysical variables, is the least of the five SD pillars positively related to the "neoliberal-turn" constructs and H&amp;LS. Results show model configurations and scale effects. Furthermore, findings reveal both synergies between neoliberal and the five SD pillars as well as both negative and non-significant relationships among them. The diversity of results calls for further model integration and specificity. Diverse findings entail caution and difficulties in generalizing knowledge. Similarly, results suggest that it is not advisable, since there may be many different and partly legitimate alternatives, to rely on just one perspective (e.g., giving primacy to economic-based analyses) and or in analyses at only one scale. The perspective effects and the stakes involved in SD urgently call for more collaborative efforts at all levels.

Flavonoids are widely recognized as natural polydrugs, given their anti-inflammatory, antioxidant, sedative and antineoplastic activities. Recently, different studies have shown that flavonoid have the potential to inhibit BET bromodomains. Previous reports suggest that flavonoids are putative inhibitors of the ZA channel due to their orientation and interactions with P86, V87, L92, L94 and N140. Herein, a comprehensive characterization of the binding mode of the biflavonoid amentoflavone and fisetin is discussed. To this end, both compounds were docked with BRD4 using four docking programs. Results were post-processed with protein-ligand interaction fingerprints. To gain further insights into the binding mode of the two natural products, docking results were further analyzed with molecular dynamics. Results showed that amentoflavone makes numerous contacts in the ZA channel, as previously described for flavonoids and kinase inhibitors. It was also found that amentoflavone can potentially make contacts with non-canonical residues for BET inhibition. Most of these contacts were not observed with fisetin. Based on these results, amentoflavone was tested for BRD4 inhibition, showing activity in the micromolar range. This work may serve as basis for scaffold optimization and further characterization of flavonoids as BET inhibitors.

Here we mathematically model black holes and the early universe following dynamics similar to RLC electrical models, focusing on their similarities at the singularity. We use this mathematically modelling to hypothesize the evolution of an expanding universe as the result of a black hole collapse followed by its evaporation. Or model consists of several steps defined by: (1) the formation of a black hole following general relativity equations; (2) growth of the black hole modelled as a resistance-capacitance-like electrical circuit; (3) expansion of space-time following the disintegration of the black hole, modelled by RLC-like dynamics. In updating this article, version 2, we will expand by presenting three additional examples related to the theory of the generalization Boltzmann's constant in curved space-time and the theory of general and especial relativity. We will calculate the critical mass to produce a black hole in the LHC, the existence of a high temperature Bose-Einstein condensate and finally we will demonstrate the existence of a tangential force to the repulsion force in the disintegration of subatomic particles. In the update of this article, version 3, we will expand to develop two examples. First, we will present the relationship between M-theory, extra dimensions with the theory of the generalization of Boltzmann's constant in curved space-time. Secondly, we will propose the idea of ​​updating the Lambda-CDM model, considering the primordial gravitational waves to correctly describe the evolution of the universe.

Paddy field is an old agriculture practice that very common especially in Asia. The earliest paddy field found dated back to 4330 BC. Most paddy fields in the world are having rectangular shapes. Whereas, in Flores island, indigenous people have developed a spider web or circular paddy field instead of regular rectangular shape and this driven by culture and local wisdom. In here, the objectives of this study are to assess the characteristic, ecology and fertility of circular paddy field compared to common rectangular shape. Fertility values were assessed using Landsat 8 remote sensing with RGB combination of NIR, SWIR 1 and blue. The study site was paddy field within Flores island. The result shows that spider web paddy field appeared in many sizes, number, altitude, ecosystem and terrain. Remote sensing result confirms that the fertility of circular paddy field is similar to the rectangular shape. Likewise, circular field has higher NDVI than rectangular field. Considering semiarid environment, limited labor and resources in Flores island, circular paddy field shape can allow the use of pivot irrigation that more efficient.

Myeloid neoplasms and acute leukemias include different entities that have been recently re-classify taking into account molecular and clinicopathological features. The myelodysplastic syndrome/myeloproliferative neoplasm (MDS/MPN) category comprises a heterogeneous group of hybrid neoplastic myeloid diseases characterized by the co-occurrence of clinical and pathologic features of both myelodysplastic and myeloproliferative neoplasms. The most frequent entity in this category is chronic myelomonocytic leukemia (CMML) which is, after acute myeloid leukemia (AML), the main myeloid disorder prone to develop cutaneous manifestations. Skin lesions associated with myelodysplastic and myeloproliferative neoplasms include a broad clinical, histopathological and molecular spectrum of lesions, poorly understood and without a clear-cut classification in the current medical literature. The aim of this review is to describe and classify the main clinical, histopathological and molecular patterns of cutaneous lesions in the setting of MDS/MPN in order to improve the diagnostic skills of dermatologists, hematologist and pathologist who deal with these patients.

Kaolin protective effect was assessed in a white grapevine cultivar ‘Cerceal’ in ‘Alentejo’ Region (southeast Portugal) where plants face extreme conditions during summer season. We addressed the hypothesis that kaolin effects lead to several changes in leaves, fruits and wine characteristics on the primary and secondary metabolism. Results showed that kaolin reduces leaf temperature which provoke an improvement in physiological parameters such as net photosynthesis and water use efficiency. This protection interferes with berries colour, leaving them more yellowish, and an increase in phenolic compounds were observed in all fruit tissues (skin, seed and pulp). Also, both berry and wine characteristics were strongly affected, with an increase of tartaric and malic acid and consequently high total acidity, while the sugar concentration decreased 8.9% in berries provoking a low wine alcohol level. Results also showed that kaolin induces high potassium, magnesium and iron, and low copper and aluminum concentrations. Moreover, the control wine showed higher content of esters related with hostile notes whereas wine from kaolin treated vines presented higher content of esters associated with fruity notes. Overall, the results strengthen the promising nature of kaolin application as summer stress mitigation strategy protecting grapevine plants and improving fruits quality and more balanced wines.

Biological systems often need to operate in complex environments where conditions can rapidly change. This is possible due to their inherent ability to sense changes and adapt their behavior in response. Here, we detail recent advances in the creation of synthetic genetic parts and circuits whose behaviors can be dynamically tuned through a variety of intra- and extra-cellular signals. We show how this capability lays the foundation for implementing control engineering schemes in living cells and allows for the creation of biological systems that are able to self-adapt, ensuring their functionality is maintained in the face of varying environmental and physiological conditions. We end by discussing some of the broader implications of this technology for the safe deployment of synthetic biology.

The aim of this work is to explain the behaviour of the multiresistance percentage of Pseudomona aeruginosa in some countries of Europe through a multivariate statistical analysis and machine learning validation, using data from the European Antimicrobial Resistance Surveillance System, the World Health Organization and the World Bank. First, we will use a descriptive analysis and a principal components analysis. Then, we use a k-means clustering to determine the countries and regions that are most affected by the antibiotic resistance. Second, we expand the database by adding some socioeconomic, governance and antibiotic-consumption variables. We then run a data panel regression analysis to determine some functions that relates the multiresistance percentage with those new variables. Finally, we use machine learning techniques to validate a pooling panel data case, using XGBoost and random forest algorithms. The results of the data panel analysis indicate that the most important variables for the multiresistance percentage are corruption control and the rule of law. Similar results are found with the machine learning validation analysis, where the human development index is an additional important variable for the multiresistance percentage.

Ionic liquids have been recognised as interesting solvents applicable in the efficient lignocellulosic biomass valorisation, especially in the biomass fractionation into individual polymeric components or direct hydrolysis some of biomass fractions. Considering the chemical character of ionic liquids, two different approaches, paved the way for a fractionation of biomass. The first strategy integrated a pre-treatment, hydrolysis and conversion of biomass through the employment of hydrogen-bond acidic 1-ethyl-3-methyimidazolim hydrogen sulfate ionic liquid. The second one relied on the use of a three-step fractionation process with hydrogen-bond basic 1-ethyl-3-methylimidazolium acetate to produce high purity cellulose, hemicellulose and lignin fractions. The proposed approaches were scrutinised for wheat straw and eucalyptus residues. Those different biomasses allowed understanding that enzymatic hydrolysis yields are dependent on the crystallinity of pre-treated biomass. The use of acetate based ionic liquid allowed to change crystalline cellulose I to cellulose II and consequently enhanced glucan to glucose yield to 93.14.1 mol% and 82.91.2 mol% for wheat straw and eucalyptus, respectively. Whereas for hydrogen sulfate ionic liquid, the same enzymatic hydrolysis yields were 61.6  0.2 mol% for wheat straw and only 7.90.3 mol% for eucalyptus residues. These results demonstrate the importance of either ionic liquid character or biomass type on the efficient biomass processing.

The COVID-19 pandemic which have affected every part of the world have been deemed a public health concern and classified as a pandemic. The government imposing travel bans and quarantine measures have been found to be effective in preventing and reducing the spread of COVID-19. A reduction in physical activity and increase in the consumption of unhealthy foods have been observed to be some of the major implications of quarantine. Adequate physical activity and increased access to healthy foods would help in improving the psychological wellbeing of individuals thereby preventing the development of cardiovascular diseases.

Since 2015, outbreaks of foot-and-mouth disease (FMD) in the Middle East have been caused by a new emerging viral lineage, A/ASIA/G-VII. In-vitro vaccine matching data indicated that this virus poorly matched (low r1-value) with vaccines that were being used in the region as well as most other commercially available vaccines. The aim of this study was to assess the performance of two candidate vaccines against challenge with a representative field virus from the A/ASIA/G-VII lineage. The results from an initial full dose protection study provided encouraging data for the A/MAY/97 vaccine, while the A22/IRQ/64 vaccine only protected 2/7 vaccinated animals. In view of these promising results, this vaccine was tested in a potency test (PD50) experiment in which 5 cattle were vaccinated with a full dose, 5 cattle with a 1/3 dose and 5 cattle with a 1/9 dose of vaccine. Vaccines were prepared as would be done during an emergency vaccination campaign using a double oil emulsion adjuvant. At 21 days post vaccination these vaccinated cattle and 3 control cattle were subsequently challenged intradermolingually with a field isolate from the A/ASIA/G-VII lineage. All cattle from the full vaccine dose, 4 cattle from the 1/3 vaccine dose and 2 cattle from the 1/9 vaccine dose were clinically protected against challenge with FMDV A/ASIA/G-VII, resulting in a heterologous potency of 6.5 PD50/dose. These data support previous studies showing that a high potency emergency vaccine can protect against clinical disease when challenged with a heterologous strain of the same serotype. Not only the r1-value of the vaccine, but also the homologous potency of a vaccine should be taken into account when advising vaccines to control an outbreak.

This study describes the synthesis, and characterization of lead-free organic ferroelectric perovskite N-methyl-N’-diazabicyclo[2.2.2]octonium)-ammonium trichloride (MDABCO-NH4Cl3). The electrospinning technique was employed to obtain nanofibers embedded with this perovskite into PVC polymer for hybrid fiber production. The dielectric, piezoelectric and pyroelectric properties of these fibers were carefully examined. From measurements of the dielectric permittivity temperature and frequency dependence, together with the pyroelectric results, a transition from a high temperature paraelectric to a ferroelectric phase that remained down to room temperature, was found to occur at 438 K. A pyroelectric coefficient as high as 290 C K-1 m-2value obtained is within the same order of magnitude as that reported for MDABCO-NH4I3 and the semiorganic ferroelectric triglycine sulfate (TGS). The hybrid nanofibers exhibited good morphological characteristics and demonstrated very good piezoelectric properties. Specifically, a piezoelectric coefficient of 42 pC/N was obtained when a periodical force of 3 N was applied. The performance of these fibers is on par with materials discussed in the existing literature for fabrication of nano energy harvesting generators. Importantly, the perovskite nanocrystals within the fibers not harmed by oxidation, making them a promising environmentally friendly platform for flexible energy harvesting.

In this work we discuss the insights from activity landscape, docking and molecular dynamics towards the understanding of the structure-activity relationships of dual inhibitors of major epigenetic targets: lysine metiltransferase (G9a) and DNA metiltranferase 1 (DNMT1). The study was based on a novel data set of 50 published compounds with reported experimental activity for both targets. The activity landscape analysis revealed the presence of activity cliffs, e.g., pairs of compounds with high structure similarity but large activity difference. Activity cliffs were further rationalized at the molecular level by means of molecular docking and dynamics simulations that led to the identification of interactions with key residues involved in the dual activity or selectivity with the epigenetic targets.

In the field of embedded systems, energy efficiency is a critical requirement, particularly for battery-powered devices. RISC-V processors have gained popularity due to their flexibility and open-source nature, making them an attractive choice for embedded applications. However, not all RISC-V processors are equally energy-efficient, and it is important to evaluate their performance in specific use cases. This paper evaluates the energy consumption and resource utilization of a new RISC-V processor, RisCO2, and four existing processors - Zero-riscy, Micro-riscy, Ri5cy, and CV32E40P - in a signal demodulation application for NDIR CO2 sensors. The processors were implemented in the PULPino SoC and synthesized using Vivado IDE. The processor named RisCO2 is based on the RV32E_Zfinx instruction set and was designed from scratch by the authors specifically for low-power signal processing applications such as signal demodulation in CO2 NDIR sensors. The other processors are Ri5cy, Micro-riscy, and Zero-riscy, developed by the PULP Platform team, and CV32E40P (derived from Ri5cy) from the OpenHW Group, all of them widely used in the RISC-V community. Our experiments showed that RisCO2 had the lowest energy consumption among the five processors, with a 53.5% reduction in energy consumption compared to CV32E40P and a 94.8% reduction compared to Micro-riscy. Additionally, RisCO2 had the lowest FPGA resource utilization compared to the best-performing processors, CV32E40P and Ri5cy, with a 46.1% and a 59% reduction in LUTs, respectively. Our findings suggest that RisCO2 is a highly energy-efficient RISC-V processor for NDIR CO2 sensors that require signal demodulation. The results also highlight the importance of evaluating processors in specific use cases to identify the most energy-efficient option. This paper provides valuable insights for designers of energy-efficient embedded systems using RISC-V processors.

A two-factor account has been proposed as an explanatory model for the formation and maintenance of delusions. The first factor refers to a neurocognitive process leading to a significant change in subjective experience; the second factor has been regarded as a failure in hypothesis evaluation characterized as an impairment of metacognitive ability. This study was focused on the assessment of metacognition in patients with schizophrenia. The aims of the study were to measure the overconfidence in metacognitive judgments through the prediction of word list recall; and to analyze the correlation between basic neurocognition: memory and executive function and metacognition through a metamemory test and the severity of psychotic symptoms. Method: 51 participants with diagnosis the of Schizophrenia were evaluated. The PANNS was used to assess the severity of psychiatric symptoms and the subtest of Metamemory included in the BANFE Battery was used to evaluate overconfidence and underestimations errors, intrusion and perseverative response, and total volume of recall. Results. The strongest correlation are observed between overconfidence errors and the positive factor of the PANSS (r= 0.774, p

This study explores the interplay between web-based professional development, teachers' self-efficacy, resilience, and work values in the context of the Davao Region. The investigation reveals significant findings in three key areas: web-based professional development, teachers' resilience, and teachers' work values. The survey indicates that web-based professional development significantly impacts teachers' self-efficacy, with interaction self-efficacy registering the highest mean score. Moreover, teachers' resilience is manifested across emotional, motivational, and social dimensions, with emotional resilience scoring the highest mean. Teachers' work values, encompassing physical facilities, social environment, job security, new challenges, professional growth, personal growth, and interpersonal relationships, all demonstrate high descriptive equivalents. The study establishes a significant positive correlation between web-based professional development and teachers' self-efficacy, as well as a significant relationship between teachers' resilience and their work values. Furthermore, both web-based professional development and teachers' resilience exert a significant influence on teachers' work values.The conclusions drawn from the study highlight the prominence of web-based professional development, teachers' resilience, and work values in the educational landscape of the Davao Region. The findings underscore the interconnectedness of these factors and their crucial role in shaping the teaching profession. In light of these results, recommendations are made to inform policy decisions and enhance professional development programs for teachers in the region. The study encourages a holistic understanding of the relationships between web-based professional development, self-efficacy, resilience, and work values, aiming to contribute to the continuous improvement of education quality in the Davao Region. Additionally, future research is suggested to delve deeper into specific aspects of teachers' general self-efficacy, social resilience, and interpersonal relationships for a more comprehensive understanding.

Nanostructured dipeptide self-assemblies exhibiting quantum confinement are of great interest due to their potential applications in the field of materials science as optoelectronic materials for energy harvesting devices. Among those, aromatic cyclo-dipeptides containing the amino acid tryptophan are wide-band gap semiconductors displaying high mechanical rigidity, photoluminescence and piezoelectric properties to be used in power generation. In this work, we report the fabrication of hybrid systems based on chiral cyclo-dipeptide L-Tryptophan- L-Tryptophan incorporated into biopolymer electrospun fibers. The micro/nanofibers contain self-assembled nanospheres embedded into the polymer matrix are wide-band gap semiconductors (gap energy 3.8 eV), display blue photoluminescence and relevant piezoelectric and pyroelectric properties with coefficients as high as 57 pCN-1 and 35×10-6 Cm-2k-1, respectively. They are therefore promise systems for thermal sensing and energy harvesting applications.

There are currently around 78 Nuclear Power Plants (NPP) in the world based on Boiling Water Reactors (BWR). The current parameter to assess BWR instability issues is the linear Decay Ratio (DR). However, it is well known that BWRs are complex non-linear dynamical systems that may even exhibit chaotic dynamics that normally preclude the use of the DR when the BWR is working at a specific operating point during instability. In this work a novel methodology based on an adaptive Shannon Entropy estimator and on Noise Assisted Empirical Mode Decomposition variants is presented. This methodology was developed for real-time implementation of a stability monitor. This methodology was applied to a set of signals stemming from several NPPs reactors (Ringhals-Sweden, Forsmark-Sweden and Laguna Verde-Mexico) under commercial operating conditions, that experienced instabilities events, each one of a different nature

Our study focused on investigating the impact of Instagram use on body satisfaction and self-esteem among participants aged 20 to 40 years (N = 95) through a cross-sectional survey design in which the Rosenberg Self-Esteem Scale, the Body Shape Questionnaire (BSQ), and ad hoc designed questions were administered. The results highlight the influence of Instagram on body dissatisfaction (p = .005) but not on self-esteem (p = .211). Gender was not found to be an influential factor (p = .173). However, it was found that greater body satisfaction correlates with higher self-esteem and vice versa (p < .001). Finally, we concluded that the number of hours users in the sample spend on Instagram is related to greater body dissatisfaction but not to lower self-esteem.

BODIPY dyes have recently raised attention as potential photosensitizers. In this work, commercial and novel photosensitizers (PSs) based on BODIPY chromophores (haloBODIPYs and orthogonal dimers strategically designed with intense bands in the blue, green or red region of the Visible spectra and high singlet oxygen production) were covalently linked to mesoporous silica nanoparticles (MSNs) further functionalized with PEG and folic acid (FA). MSNs of approximately 50 nm in size with different functional groups were synthesized to allow multiple alternatives of PS-PEG-FA decoration of their external surface. Different combinations varying the type of PS (commercial Rose Bengal, Thionine and Chlorine e6 or custom-made BODIPY-based), the linkage design and the length of PEG are detailed. All the nanosystems were physicochemically characterized (morphology, diameter, size distribution and PS loaded amount) and photophysically studied (absorption capacity, fluorescence efficiency, and singlet oxygen production) in suspension. For the most promising PS-PEG-FA silica nanoplatforms, the biocompatibility in dark conditions and the phototoxicity under suitable irradiation wavelengths (blue, green, or red) at regulated light doses (10-15 J/cm2) were compared with PSs free in solution in HeLa cells in vitro.

Hybrid biomaterials were engineered using the electrospinning technique, incorporating the dipeptide Boc-L-phenylalanyl-L-Isoleucine into microfibers composed of biocompatible polymers. The examination by scanning electron microscopy affirmed the morphology of the microfibers, exhibiting diameters ranging between 0.9 to 1.8 µm. The dipeptide self-assemblies into spheres with a hydrodynamic size between 0.18 to 1.26 µm. The dielectric properties of these microfibers were characterized through impedance spectroscopy, where variations in both temperature and frequency were systematically studied. The investigation revealed a noteworthy rise in the dielectric constant and AC electric conductivity with increasing temperature, attributable to augmented charge mobility within the material. The successful integration of the dipeptide was substantiated through the observation of Maxwell-Wagner interfacial polarization, affirming the uniform dispersion within the microfibers. In-depth insights into electric permittivity and activation energies were garnered using the Havriliak-Negami model and the AC conductivity behavior. Very importantly, these engineered fibers exhibited pronounced pyroelectric and piezoelectric responses, with Boc-Phe-Ile@PLLA microfibers standing out with the highest piezoelectric coefficient, calculated to be 56 pC/N. These discoveries help us understand how dipeptide nanostructures embedded into electrospun nano/microfibers can greatly affect their pyroelectric and piezoelectric properties. They also point out that polymer fibers could be used as highly efficient piezoelectric energy harvesters, with promising applications in portable and wearable devices.

Rhizosphere bacteria have a decisive influence on plant ionic adjustment, as well as in ameliorating plant growth under an array of stress situations. Plant growth-promoting rhizobacteria (PGPR) colonize the rhizosphere of plants and promote plant growth through mechanisms such as solubilization of mineral phosphates, biological N2 fixation, production of siderophores and phytohormones, and can induce systemic resistance in the plant. This can be of extreme importance when considering the restoration of salinized grounds by halophytic species. This present work aims to evaluate the physiological fitness and phytoprotection improvement by salt marsh PGPR in Halimione portulacoides under mild and severe salt stress. Plants inoculated with PGPR-consortium showed higher photochemical performances, improved antioxidant response, and promotion of osmotic balance traits, that boosted the individual’s ability to cope with mild salt stress. All these changes are also in line with the differential elemental profiles (Na, K, and Ca) observed in the different plant tissues. Even under severe salt stress, some physiological traits were improved when compared to the non-inoculated individuals. The results developed under this work, point out an important role of bioaugmentation in promoting plant fitness and improving salt tolerance, with a great potential for applications in seawater agriculture, restoration, and bio-reclamation of salinized soils.

The contamination of areas around solid urban waste dumps is a global challenge for the maintenance of environmental quality in large urban centres in developing countries. This study applied geophysical methods (electrical resistivity) to identify leachate contamina-tion plumes in the subsoil and groundwater, as well as to describe their temporal (2020 and 2021) dynamics in the lithology and groundwater around the Hulene - B waste dump, Maputo, Mozambique. Geophysical methods (electrical resistivity) were applied to identify possible groundwater contamination plumes, their dynamics, mechanisms of their enrichment and dispersion. Eight 400 m electrical resistivity profiles were performed, four profiles in January 2020 and four profiles in May 2021, overlapped, and the data were inverted with RES2D software. The electrical resistivity models indicate an E - W move-ment of large contamination plumes that dilute superficially into the natural surface wa-ter receiving basin and groundwater, creating zones of resistive anomalies. The thickness of the plumes in the subsurface environment was shown to be extensive in summer for profiles 1a and 2b and we associate it with the higher leachate production and migration mechanisms, which are intense in the hot and rainy season. Profile 4b showed the prop-agation of anomalous surface and subsurface areas, which was associated with higher leachate production and migration process in the new deposition zone (west). The spatial distribution of contamination plumes at both stations reduced significantly as we moved further away from the waste deposit, revealing the attenuating effect of groundwater and lithological substrate (Profile 3 a, b, and fig.7).

In this article we derive a closed form expression for the symmetric logarithmic derivative of Fermionic Gaussian states. This provides a direct way of computing the quantum Fisher Information for Fermionic Gaussian states. Applications range from quantum Metrology with thermal states to non-equilibrium steady states with Fermionic many-body systems.

Low-frequency electromagnetic induction (EMI) is a non-invasive geophysical method that is based on the induction of electromagnetic (EM) waves into the subsurface to quantify changes in electrical conductivity. In this study we present an open (design details and software are accessible) and modular system for the collection of EMI data. The instrument proposed allows to adjust the separations between the transmitter and up to four receiving antennas as well as the acquisition frequency (in the range between 3 and 50 kHz) to permit measurements with variable depth of investigation. The sensor provides access to raw data and the software described in this study allows control of the signal processing chain. The design specifications permit apparent conductivity measurements in the range of between 1 mS/m and 1000 mS/m, with a resolution of 1.0 mS/m and with a sampling rate of up to 10 samples per second. The sensor allows for a synchronous acquisition of a time stamp and a location stamp for each data sample. The sensor has a mass of less than 5 kg, is portable and suitable for 1-person operation, provides 4 hours of operation time on one battery charge, and provides sufficient rigidity for practical field operations.

In Low and Lower-Middle-Income countries, the prevalence of anemia in infancy remains high. In early childhood anemia cause irreversible cognitive deficits and represents a higher risk of child mortality. The consequences of anemia in infancy are a major barrier to overcome poverty traps. The aim of this study was to analyze based on a multi-level approach, different factors associated with anemia in children 6–23 m old based on recent available Standard Demographic Health Surveys (S-DHS). We identified 52 S-DHS that had complete information in all covariates of interest in our analysis between 2005 and 2015. We performed traditional logistic regressions and multilevel logistic regression analyses to study the association between hemoglobin concentrations and household, child, maternal, socio-demographic variables. In our sample, 70 % of the 6–23 m old children were anemic. Child anemia was strongly associated with maternal anemia, household wealth, maternal education and low birth weight. Children fed with fortified foods, potatoes and other tubers had significantly lower rates of anemia. Improving overall household living conditions, increasing maternal education, delaying childbearing and introducing iron rich foods at six months of age may reduce the likelihood of anemia at in toddlerhood.

Here we will electrically-quantum model the neutron and proton as a three-phase alternating current electric generator, for this, we will use the theory of three-phase electric generators and vector or phasor diagrams. We will use this model to hypothesize how the quarks that form neutrons and protons with a combined mass of 10 MeV/c², can generate, through quarks-antiquarks-gluon interactions, a mass of 939.56 MeV/c² for the neutron and a mass of 938.27 MeV/c² for the proton. Using quantum mechanics and the theory of the generalization of the Boltzmann constant in curved space-time we will calculate the number of quarks-antiquarks-gluons and gravitons inside a neutron. We will also analyse βˉ decay using vector diagrams, we will calculate the tension of the string T₀ and the length of the string ℓs between quarks-antiquark and finally, we will model a black hole using a neutron equivalent model. In version 2 of this article, we will update the vector diagrams of the βˉ decay and theoretically calculate the energy of the W⁻ boson, the Z⁰ boson, and the Θ angle, Θ = arc cos (W⁻/Z⁰). We will demonstrate, through vector diagrams, that quarks-antiquarks-gluon interactions are the cause of the origin of the W⁻ boson and the Z⁰ boson. We will also demonstrate how the fine structure constant α originates. It is important to make clear, in future updates, we will describe the relationship that exists between the theory described in this paper and the Isospin theory, flavour and colour theory

Obstructive sleep apnea (OSA) is a common sleep disorder that is associated with a wide variety of health conditions, including cardiovascular, cerebrovascular, metabolic, neoplastic, and neurocognitive manifestations. OSA is mainly characterized by repeated upper airway obstructions during sleep that cause episodes of chronic intermittent hypoxia (IH), resulting in tissue hypoxia-reoxygenation. Decreased arterial oxygen pressure (PaO2) and hemoglobin saturation (SatO2) stimulate reflex responses to overcome the obstruction. The prevalence of OSA is significant worldwide, particularly in women during pregnancy, due to the physiological changes associated with this stage of life, especially in its later stages. It is associated with an increased risk of hypertension, pre-eclampsia and diabetes, among others. OSA during pregnancy can interfere with normal fetal development and is associated with growth retardation, preterm birth, or low term weight. Carotid body stimulation and hypoxia-reoxygenation episodes contribute to cardiovascular disease and oxidative stress, that can harm both, mother and the fetus, even into the adulthood. Because gestational intermittent hypoxia (GIH) is the hallmark of OSA in pregnancy, this review examines the impact of GIH on maternal, fetal, and offspring respiratory outcomes. Most adverse outcomes can be prevented by continuous positive airway pressure (CPAP) therapy and lifestyle changes if gestational OSA is detected early and treated appropriately.

Lead-free ferroelectric perovskite N-methyl-N'-diazabicyclo[2.2.2]octonium)–ammonium triio-dide, MDABCO-NH₄I₃, nanocrystals are embedded in three different polymer fibers fabricated by the electrospinning technique. The nanofibers, which are very flexible and have a high Young modulus, behave as active piezoelectric energy harvesting sources that produce a piezoelectric voltage coefficient up to geff = 3.6 VmN-1 and show a blue intense luminescence band at 325 nm. In this work, the pyroelectric coefficient is reported for the MDABCO-NH₄I₃ perovskite inserted in electrospun fibers. At the ferroelectric-paraelectric phase transition, the embedded nanocrystals display a pyroelectric coefficient as high as 194×10-6 Cm-2k-1, within the same order of magnitude as that reported for the state-of-the-art bulk ferroelectric triglycine sulfate (TGS). The perovskite nanocrystals embedded into the polymer fibers remain stable, and no degradation is caused by oxidation.

Selection of the most suitable material is one of the key decisions to be taken at the design stage of a manufacturing process. Traditional approaches as Ashby maps based on material properties are widely used in the industry. However, in the production of multimaterial components, the criteria for the selection can include antagonistic approaches. The aim of this work is the implementation of a methodology based on the results of process simulations for several materials and classify them by applying an advanced data analytics method based on Machine Learning (ML), in this case the Support Vector Regression (SVR) and Multi-Criteria Decision Making (MCDM) methodolo-gies, in this case Multi-criteria Optimization and Compromise Solution (VIKOR) combined with Entropy weighting methods. In order to do this, a Finite Element Model (FEM) has been built to evaluate the extrusion force and the die wear in a multi-material co-extrusion process of bimetallic Ti6Al4V-AZ31B billets. After applying SVR and VIKOR combined with Entropy weighting methodologies, a comparison has been established based on the material selection and complexity of the methodology used, resulting that material chosen in both methodologies is very similar and MCDM method is easier to implement because there is no need of evaluate the error of the pre-diction model and the time for data preprocessing is less than the time needed in SVR.

Heat pumps are increasingly becoming a key solution in the quest for decarbonization, offering a significant advantage over traditional boilers due to their superior energy efficiency. Not only can heat pumps provide both heating and cooling, but they also achieve thermal efficiencies exceeding 500%, which can seem to defy conventional expectations. The outdoor unit of a heat pump consists of about twenty main components, one of which is a complex network of copper pipes and sheets welded to valves, connectors, and other fittings. This set involves over thirty welded joints, highlighting a significant opportunity for reducing manufacturing time through process optimization. Copper is a critical material extensively used in various applications due to its excellent thermal and electrical conductivity. However, these very properties make welding copper particularly challenging, especially when aiming to automate and streamline industrial processes. Traditionally, connecting copper pipes and fittings is done through brazing, yet, alternative methods such as LASER welding, electron beam welding, resistance welding, friction welding, and ultrasonic welding also exist. This study focuses on the ultrasonic welding of copper, aiming to identify the optimal parameters that maximize the mechanical strength of overlapping joints and ensure effective tube sealing. Experimental results showed that for copper sheets, the best outcomes were achieved with a welding time of 3 s and a pressure of 6 bar. For tube sealing, the optimal conditions were a welding time of 3 s and a pressure of 4 bar. For both scenarios, the same variables were used, retention time of 0.62 s, initial pressure of 2 bar, retention pressure of 2 bar and sonotrode rising pressure of 3 bar. The analysis reveals that ultrasonic welding of copper can achieve both robust mechanical strength and reliable sealing, making it a promising technique for industrial applications.

Corporate Sustainability (CS) literature has gone through a period of intense development. The moment is favorable to gathering these contributions to consistently advance the state of the art in CS and, also, discuss them to apply in real contexts. The main objective of the paper is to systematize, through a systematic literature review using content analysis of the 30 most cited articles from 2007 to 2017, the guiding pillars of CS management. The systematic search for papers was carried out in Scopus and Web of Science and the initial screening of the papers was assisted by the coding software MAXQDA 2018, through which the authors structured and analyzed their main insights, contributions and conclusions. After getting acquainted with the sample, an in-depth reading of the texts was conducted and 60 CS elements were identified. The elements cited in the relevant literature were grouped into 6 pillars related to Corporate sustainability strategy; Corporate governance; Human resources management; Knowledge and innovation management; Measurement, disclosure and independent assurance; and Management systems and Integrated management systems. The discussion of CS management pillars presented in this study provides understanding to researchers and managers on the main aspects that make up the integration of this construct in the companies, especially from a management point of view.

This paper investigates the path following control problem for a unmanned surface vehicle (USV) in the presence of unknown disturbances and system uncertainties. The simulation study combines two different types of sliding mode surface based control approaches due to its precise tracking and robustness against disturbances and uncertainty. Firstly, an adaptive linear sliding mode surface algorithm is applied, to keep the yaw error within the desired boundaries and then an adaptive integral non-linear sliding mode surface is explored to keep an account of the sliding mode condition. Additionally, a method to reconfigure the input parameters in order to keep settling time, yaw rate restriction and desired precision within boundary conditions is presented. The main strengths of proposed approach is simplicity, robustness with respect to external disturbances and high adaptability to static and dynamics reference courses without the need of parameter reconfiguration.

The use of active video games or exergames has been booming recently, as they are motivating and promote exercise and healthy lifestyle habits for their users, and these immersive virtual reality (IVR) exercise programs could be compared to traditional physical exercise programs. A starting point for this would be to explore the physiological responses that can be generated by its use. Therefore, the main objective of this study was to evaluate the response across certain physiological parameters (heart rate, blood pressure and stress) after an IVR exergame exposure in a sample of healthy adults, and secondarily to explore its feasibility and usefulness as a tool to facilitate physical exercise. 37 healthy adults (22-54 years, 54.1% women) participated in the study. They carried out one exergaming session with the HTC Vive ProTM hardware. The primary outcome was evaluated using the concentration of cortisol, heart rate and blood pressure. Secondary outcomes were evaluated with safety using the Simulator Sickness Questionnaire (SSQ); usability evaluated with the System Usability Scale (SUS); personal experiences evaluated with Game Experience Questionnaire (GEQ) and perceived exertion through the Borg perceived effort scale. All participants completed the IVR session without significant adverse effects, and all physiological parameters analysed increased significantly in relation to pre-intervention levels. Perceived exertion corresponded to a moderate to intense exercise (6.30±0.50/10 on the modified Borg scale). All the sample considered the experience as good or very good and would recommend it. These findings support that our IVR session can be compared to a moderate to intense physical activity, as it involved similar perceived exertion with significant increases in heart rate, blood pressure and salivary cortisol levels.

Alcohol effects on hepatic lipid metabolism through various mechanisms, leading synergistically to an accumulation of fatty acids (FA) and triglycerides. Obesity, as well as, the dietary fat [saturated fatty acids (FA) versus poly-unsaturated fatty acids (PUFA)] may modulate the hepatic fat. Alcohol inhibits adenosine monophosphate activated kinase (AMPK). AMPK activates peroxisome proliferators activated receptor a (PPARα) and leads to a decreased activation of sterol regulatory element binding protein 1c (SRABP1c). The inhibition of AMPK, and thus of PPARα results in an inhibition of FAs oxidation. This ß-oxidation is further reduced due to mitochondrial damage induced through cytochrome P4502E1 (CYP2E1) driven oxidative stress. Furthermore, the synthesis of FAs is stimulated through an activation of SHREP1. In addition, alcohol consumption leads to a reduced production of adiponectin in adipocytes due to oxidative stress and to an increased mobilization of FAs from adipose tissue and from the gut as chylomicrons. On the other side, the secretion of FAs via very low density lipoproteins (VLDL) from the liver is inhibited by alcohol. Alcohol also affects signal pathways such as early growth response 1 (Egr-1) associated with the expression of tumour necrosis factor  (TNF), and the mammalian target of rapamycin (mTOR) a key regulator of autophagy. Both have influence the pathogenesis of alcoholic fatty liver. Alcohol-induced gut dysbiosis is contributing to the severity of ALD by increasing metabolism of ethanol in the gut and promoting intestinal dysfunction. Moreover, pathogen associated molecular paterns (PAMPS) via specific Toll-like receptors (TLR) bacterial overgrowth is leading to the translocation of bacteria. Endotoxins, and toxic ethanol metabolites enter the enterohepatic circulation reaching the liver, inducing the activation of the nuclear factor kappa-B (NFB) pathway. Pro-inflammatory cytokines released in the process contribute to inflammation and fibrosis. In addition, cellular apoptosis is inhibited in the favor of necrosis.

The worldwide number of migrants has had a rapid increase during the last fifteen years. Despite the extensive research studies that elucidate the increase in migrants' recipient countries, we know little about the relationship between the climate factors and human mobility in the countries of origin. Hence, this study focuses on the effects of weather and the propensity of individuals to leave a territory by measuring the importance of rain precipitation or the lack of it in one of the critical food corridors of Central America, formed by El Salvador, Honduras, and Guatemala. To study the mobility process, we develop a stochastic frontier model; the main result shows a greater propensity to migrate when there is a significant drought event in the place of origin. Some other factors that motivate people to leave their homeland are the effect of other climate events measured through the control system (ENSO), homicide levels, economic performance, and exchange rate. The findings allow differentiating between drought and excess precipitation on a population and mobility to other territories. In addition, these results permit us to derive observable implications of the different effects of flooding and drought and create public policies of prevention, mitigation, and resilience.

Here we mathematically model black holes following dynamics similar to RC electrical model, focusing on their similarities at the singularity. We use this mathematically modelling to hypothesize the origin and growth of a black Hole. Or model consists of several steps defined by: (1) the formation of a black hole following general relativity equations; (2) growth of the black hole modelled as a resistance-capacitance-like electrical circuit. Based on the mathematical modeling of a black hole following dynamics similar to an RC circuit, for a circular motion with constant acceleration, in which the condition is fulfilled, Vt = ω r, we are going to calculate the amount of dark matter in the Milky Way galaxies and the Andromeda galaxy and subsequently the rotation curve of both galaxies to compare them with observed or measured values.

Here we will model the curvature and contraction of space-time using as a basis the equation of state of an ideal gas and the Hawking´s equation for the temperature of a black hole. We will use this mathematical model to hypothesize that the Boltzmann´s constant depends on the state of matter, that is, there is a known Boltzmann´s constant for flat space-time and an effective Boltzmann´s constant for curved space-time. This model will allow us to quantify the structure of space-time and will serve as a basis to determine the origin of gravity and the origin of elementary particles. Using the Shannon-Boltzmann-Gibbs entropy relation, we will demonstrate that information is not lost and depends on the state of matter, the information is encoded and depends on the effective Boltzmann´s constant.

The wave energy converter (WEC) technology constantly develops new designs and models. To encourage its development within the energy sector, research is required to improve current designs and create durable and effective devices. However, it is also crucial to investigate the suitability of a WEC to a site-specific sea condition as this can impact its optimal power absorption and constructability. This study evaluates and compares the efficiency of a heaving buoy with varied geometries in one of the most energetic places along the Mexican coast. A statistical analysis of the wave climate on the coast of Ensenada during the last 42 years is performed to define the conditions to which the device is subjected. The location of the WEC in shallow waters is chosen using a computational model which solves the modified mild slope equation in its elliptic shape. The heaving buoy floater is studied using three distinct geometries: a semi-sphere, a cylinder, and a proposed rounded semi-rectangle. The hydrodynamic response of the three geometries is then analysed in the frequency and time domain using ANSYS AQWA. The hydrodynamic study involves the assessment of the floating body dynamics, exerted forces, the power absorbed as well as the suitability of the proposed power take-off (PTO) system. Findings reveal that the proposed geometry absorbs the most energy, with an annual power of 135.11 MW, and that the transmission PTO design is appropriate for this type of technology.

This study examines the relationship between semantic memory and social cognition in schizophrenia, addressing how these cognitive domains intersect. Semantic memory, which includes general world knowledge and word meanings, was evaluated using verbal fluency tasks and the Camels and Cactus Test. Social cognition, essential for social interaction, was assessed through emotion recognition (Faces Test) and Theory of Mind (Hinting Task). Participants included 50 individuals with schizophrenia and 30 controls. The schizophrenia group showed significantly lower performance on both semantic memory and social cognition tasks. Notably, strong correlations were found between the Camels and Cactus Test and social cognition measures, suggesting that social cognition deficits in schizophrenia may be linked to semantic memory impairments. Regression analyses highlighted that the Camels and Cactus Test significantly predicted social cognition performance, independent of symptomatology. These findings underscore the interconnectedness of semantic memory and social cognition in schizophrenia, suggesting that semantic memory deficits, particularly in non-categorical associations, play a important role in social cognitive impairments. This study provides new insights into the cognitive underpinnings of schizophrenia, emphasizing the need for further research to explore these relationships and their implications for cognitive models and therapeutic interventions.

Encouraged by the administration the gentrification process has been useful in economic terms for the reactivation of socio-cultural fabrics of historic urban spaces in decline. What was initially considered an advantage has led to the touristification of historic centres, and in turn to the alter-ation of their original use. In these settings, the demographic void caused by increasingly shunning local identity has combined with pressure from excessive tourism and the obsolescence of heritage protection bodies in charge of conservation. Given the crisis affecting the definitions of the current system, this study aims to review the envi-ronmental agents of heritage value in relation to the processes of touristification and gentrification. Data obtained from different methodologies are analysed using a multidisciplinary database, a model which enables the analysis of the relevant information from the different interacting fields. The case study focuses on the historic town centre of Seville specifically between 2015 and 2020. Elements are defined as indicators for these processes and the analysis of the case study will com-prise the main results of this research.

This manuscript reviews the relationship between customer perception factors and AI-enabled customer experience in the Ecuadorian banking industry. The study employs a self-designed online questionnaire with five factors for customer perception (convenience in use, personalization, trust, customer loyalty, and customer satisfaction) and two categories for AI-enabled customer experience (AI-hedonic customer experience and AI-recognition customer service). The final valid dataset consisted of 226 questionnaires. The data analyses and the hypotheses tests were done using SPSS 26 and structural equation modeling, respectively. The main findings displayed that all five customer perception factors have a positive and significant effect on AI-enabled customer experience in the Ecuadorian banking industry. Study results are aligned with previous findings from other countries, particularly the banking environment in the United Kingdom, Canada, Nigeria, and Vietnam. The AI techniques involved in the financial sector increase the valuation of customer experience due to AI algorithms recollecting, processing, and analyzing customer behavior. This study contributes with a complete statistical and econometric model for determinants of AI-enabled customer experience. The main restriction of the study is the particular analysis of the most demanded AI financial services (not all services and products are included) and the inexistence of a customer perception index. For upcoming research, the authors recommend performing a longitudinal study using quantitative data to measure the effect of AI-enabled customer experience on the Ecuadorian banks’ performance.

The RNA-binding protein Human antigen R (HuR) regulates stability, translation, and nucleus-to-cytoplasm shuttling of its target mRNAs. The protein has been progressively recognized as a relevant therapeutic target for several pathologies like cancer, neurodegeneration, as well as inflammation. Inhibitors of mRNA binding to HuR might thus be beneficial against a variety of diseases. Here we present the rational identification of structurally novel HuR inhibitors. In particular, by combining chemoinformatics approaches, high throughput virtual screening and RNA–protein pull-down assays, we show that the 4-(2-(2,4,6-trioxotetrahydropyrimidin-5(2H)-ylidene)hydrazineyl)benzoate ligand exhibits dose-dependent HuR inhibition in binding experiments. Importantly, the chemical scaffold is new with respect to the so-far known HuR inhibitors, opening up a new avenue for the design of pharmaceutical agents targeting this important protein.

The potential use of nanostructured dipeptide self-assemblies in materials science for energy harvesting devices is a highly sought-after area of research. Specifically, aromatic cyclo-dipeptides containing tryptophan have garnered attention due to their wide-bandgap semiconductor properties, high mechanical rigidity, photoluminescence, and nonlinear optical behavior. In this study, we present the development of a hybrid system comprising biopolymer electrospun fibers incorporated with the chiral cyclo-dipeptide L-Tryptophan-L-Tyrosine. The resulting nanofibers are wide-bandgap semiconductors (bandgap energy 4.0 eV) and consist of self-assembled nanotubes embedded within a polymer matrix, exhibiting intense blue photoluminescence. Moreover, the cyclo-dipeptide L-Tryptophan-L-Tyrosine incorporated into polycaprolactone nanofibers displays a strong effective second harmonic generation signal of 0.36 pm/V and also shows notable piezoelectric properties with a high effective coefficient of 22 pCN−1. These hybrid systems hold great promise for applications in the field of nanoenergy harvesting and nanophotonics.

The copper mining industry is increasingly using artificial intelligence methods to improve cop-per production processes. Recent studies reveal the use of algorithms such as Artificial Neural Network, Support Vector Machine, and Random Forest, among others, to develop models for predicting product quality. Other studies compare the predictive models developed with these machine learning algorithms in the mining industry, as a whole. However, not many copper mining studies published compare the results of machine learning techniques for copper recovery prediction. This study makes a detailed comparison between three models for predicting copper recovery by leaching, using four datasets resulting from mining operations in northern Chile. The algorithms used for developing the models were Random Forest, Support Vector Machine, and Artificial Neural Network. To validate these models, four indicators or values of merit were used: accuracy (acc), precision (p), recall (r), and Matthew’s correlation coefficient (mcc). This paper describes dataset preparation and the refinement of the threshold values used for the predictive variable most influential on the class (the copper recovery). Results show both a precision over 98.50% and also the model with the best behavior between the predicted and the real. Finally, the models obtained show the following mean values: acc=94.32, p=88.47, r=99.59, and mcc=2.31. These values are highly competitive as compared with those obtained in similar studies using other approaches in the context.

Ferruginol is a promising abietane-type antitumor diterpene able to induce apoptosis in SK-Mel-28 human malignant melanoma. We here aim to increase this activity by testing the effect of a small library of ferruginol analogues. After an screening of their antiproliferative activity (SRB staining) on SK-Mel-28 cells the analogue 18-aminoferruginol (GI50=10 µM) was further selected for mechanistic studies including effects on mitochondrial viability (MTT assay, IC50=10 µM p<0.0001), induction of apoptosis (DAPI staining, p<0.001), changes in cell morphology associated with the treatment (cell shrinkage and membrane blebbing), induction of caspase-3/7 activity (2.5x at 48h, 6.5x at 72h; p<0.0001), changes in the mitochondrial membrane potential (not significant), and effects on 2D cell migration and 3D cell invasion (modified Boyden assay, not significant). The results were compared to those of the parent molecule (ferruginol, GI50»50 µM) and paclitaxel (GI50=10 nM) as a reference drug. In conclusion, we demonstrate here that derivatization of ferruginol into 18-aminoferruginol increases its antiproliferative activity 5 times in SK-MEL-28 cells as well as changing the apoptotic mechanism of its parent molecule ferruginol from activation of caspases without depolarization of mitochondrial membrane.

Molecules sourced from marine environments hold immense promise for the development of novel therapeutic drugs, owing to their distinctive chemical compositions and valuable medicinal attributes. Notably, Talarolide A and Talaropeptides A-D have gained recent attention as potential candidates for pharmaceutical applications. This study aims to explore the chemical reactivity of Talarolide A and Talaropeptides A-D through the application of molecular modeling and computational chemistry techniques, specifically employing Conceptual Density Functional Theory (CDFT). By investigating their chemical behaviors, the study seeks to contribute to the understanding of the potential pharmacological uses of these marine-derived compounds. The investigation involves the utilization of molecular modeling and computational chemistry tools, with a specific focus on Conceptual DFT. These techniques are applied to examine the chemical reactivity of Talarolide A and Talaropeptides A-D, shedding light on their potential for interacting with various biological targets. The research reveals insights into the chemical reactivity of Talarolide A and Talaropeptides A-D, uncovering active reaction sites and potential biological targets. Talarolide A demonstrates robust anti-inflammatory properties and antitumor activity against diverse cancer cell lines, while Talaropeptide A displays antimicrobial efficacy against both bacteria and fungi. The study underscores the significance of comprehending the chemical reactivity of natural marine products for advancing pharmaceutical development. By employing computational tools such as Conceptual DFT, this research uncovers crucial information about the active sites and potential targets of Talarolide A and Talaropeptides A-D. The findings contribute to the broader understanding of marine-derived peptides and their prospects as pharmaceutical agents, though further investigations are necessary to fully elucidate their pharmacological attributes.

The education system has become even more complex following the global pandemic, which saw face-to-face teaching transition to virtual teaching. To cope with this abrupt transition, it is essential that teachers had a sufficient level of digital teaching competence. This article aims to increase awareness of teachers' self-perception of their digital teaching competences in the educational field. Specifically, this study explores Spanish secondary school teachers’ knowledge and use of different ICT tools by evaluating their competence based on different areas proposed by The National Institute of Technology and Professional Development (Instituto Nacional de Tecnologías Educativas y de Formación del Profesorado, INTEF), Madrid, Spain. From the results of the questionnaires, we have determined that teachers consider themselves to have an upper intermediate level of digital teaching competence, although there are still shortcomings that need to be addressed in order to improve this level of competence, and its true integration in the teaching–learning process.

This work presents the results of a computational study of the chemical reactivity and bioactivity properties of the members of the Theopapuamides A-D family of marine peptides by making use of our own proposed methodology named Computational Peptidology (CP) that has been successfully considered in previous studies of this kind of molecular systems. CP allowed for the determination of the global and local descriptors that come from Conceptual Density Functional Theory (CDFT) that can give an idea of the chemical reactivity properties of the marine natural products under study which are already known to be related to their bioactivity. At the same time, the validity of the procedure based on the adoption of the KID (Koopmans in DFT) technique as well as the MN12SX/Def2TZVP/H2O model chemistry has been successfully verified. Together with several Chemoinformatic tools that can be used for the improvement of process of Virtual Screening, some additional properties of these marine peptides were identified related to their ability to behave as useful drugs. With the further object of analyzing their bioactivity some parameters of usefulness for future QSAR studies, their predicted biological targets and the the ADMET (Absorption, Distribution, Metabolism, Excretion and Toxicity) parameters related to the Theopapuamides A-D pharmacokinetics are also reported.

Here, using the theory of electrical-quantum modelling of the neutron and proton as a three-phase alternating current electrical generator, we will analyse the proton decay and the inverse neutron decay and determine the following subatomic particles, Dproton, Protoniu, Dneutron and Neutroniumd.

Climate change is expected to affect the agricultural sector in ways that are often unclear to predict. If in the short- medium-terms farmers may adapt to climate change by adjusting agricultural practices, in the long-term these adjustments may become insufficient, forcing farmers to change their farming systems. The extent and direction in which these farming system transitions will occur is still a subject underexplored in the literature. We propose a new framework to explore the marginal effect of climate change on the choice of the farming system, while controlling the effect of other drivers known to also influence farming system choice. Using a spatial-explicit farming system choice-model developed by a previous study in an extensive agricultural region of southern Portugal, we applied a space-for-time approach to simulate the effect of climate change on the future dynamics of the farming systems in the study area. Results suggest that climate change will force many farmers to change the farming system in a foreseeable future. The extent of the projected changes in farming systems is likely to trigger significant social, economic, or environmental impacts, which should require early attention from policy makers.

Mexico is currently facing important water management challenges. Cities in the country are facing water scarcity and at the same time, they struggle with floods during the raining season. The water sensitive urban design (WSUD) approach has proved to be helpful in tackling urban water challenges such as floods and water scarcity and it is being implemented in cities around the world. The WSUD approach highlights the role of both the water cycle and the water utilities systems, when transitioning towards a water sensitive stage. Therefore, the objective of this research is to analyse the current situation of the water cycle and the water utility (SIAPA). To do so, we have selected the Metropolitan Area of Guadalajara (MAG) and proposes a case study approach. Within our case of study, we answer two questions: 1) What are the causes of water scarcity and flooding in the MAG? and 2) What are the proposals to solve these problems under a WSUD approach? By answering these questions, we identified that the water management in the MAG corresponds to a single purpose infrastructure. This type of management does not contribute to solve the problems of water scarcity and floods. The water supply policy is based only on the construction of large dams disregarding the storage and use of rainwater, and reuse of greywater, and water-conservation devices. In order to transition towards a water sensitive stage, a WSUD approach that includes multi-purpose infrastructure should be considered. Such as green roofs, swales, rainwater gardens, infiltration trenches, etc.

A multiscale mathematical model is proposed seeking to study the propagation dynamics of the Human Immunodeficiency Virus (HIV) in a group of young people between 15 and 24 years of age, through sexual contact without protection, considering the use of antiretroviral therapy (ART) and therapeutic failure. The model consists in a scale-free complex network that follows a power law, coupled with the immunological dynamics of each individual, that is, it considers the infection by the virus in the immune system of each HIV carrier, through a system of non-linear differential equations that govern the infection’s behavior in the immune system. Propagation of the virus in the network is modelled by taking into account information from the immunological status of each person. The study found that for a population to have high HIV prevalence, it is not necessary at the beginning of the simulation time for the virus to propagate rapidly. In addition, the study proves that with a higher number of sexual partners, there will be greater prevalence of HIV in the population and that the use of ART helps to control the propagation of the infection in the population. As an interesting result, it was also found that there is a higher number of HIV carriers who abandon ART than those who have access to it.

A new sustainable polypropylene terephthalate (PPT) coating was synthesized from recycled polyethylene terephthalate (PET) and applied on hydraulic concrete substrate to improve its durability. First step, PET bottles wastes were grinded and depolymerized by glycolysis using propylene glycol (PG), in a Vessel-type reactor (20–180 °C) to synthesize bis(2-hydroxypropyl)-terephthalate (BHPT), which was applied as coating to one-three layers on hydraulic concrete substrate, by brushing technique and polymerized (150 °C for 15 h) to obtain PPT. PET, BHPT and PPT were characterized by FT-IR, PET and PPT by TGA, and the PPT coatings by SEM (thickness), by ASTM-D3359-17 (adhesion) and by water contact angle (wettability). The durability of hydraulic concrete coated with PPT was studied by resist chloride ion penetration (ASTM-C1202-17), carbonation depth at 28 days (RILEM-CPC-18), and absorption water ratio (ASTM-C1585-20). The results demonstrated that the BHPT and PPT were synthetized (FT-IR), PPT had a similar thermal behaviour to PET (TGA); the PPT coatings had good adhesion to the substrate, with thicknesses of micrometric units; hydrophilic (similar to PET coatings), and the durability of hydraulic concrete coated with PPT (2-3 layers) improved (migration of chloride ions decreased, carbonation depth was negligible, and the absorption water ratio decreased).

In this study, ignition delay and burning rate are experimentally investigated in relation to the effect of pristine carbon nanotubes (CNTs), sodium dodecylbenzene sulfonate (SDBS), and diesel blends. Single droplet combustion tests were conducted in a combustion system for 21 days using CNTs at concentrations of 50 ppm and 100 ppm, that were dispersed in Colombian commercial diesel and stabilized by SDBS. Additionally, recordings of the combustion were collected, and the Shadowgraph optical method was utilized for monitoring the evolution of droplet size during combustion. The measurements were done over a four-week period. The results demonstrated that the temporal stability has a direct impact on the single droplet combustion tests because a concentration of CNTs of 100 ppm showed higher stability than those achieved by 50 ppm. Consequently, improvements were found with a concentration of 100 ppm, for instance, thermal conductivity increased by about 20%, ignition delay time by 16.2%, and burning rate by 30.5%.

Thermal variations affect tri-trophic interactions involving plants, herbivores, and parasitoids, causing a mismatch between their phenological cycles. In the current environmental context of climate change, climatic factors can undergo profound and sudden changes, such as sudden hot or cold snaps. Here we show that episodes of short but sustained low temperatures have increased, mainly in the month of May, in the last two decades. We subjected galls induced by Asian chestnut gall wasp (ACGW) Dryocosmus kuriphilus to cold stress to assess if and how the pest and its parasitoids were affected. Over the course of two years seasonal parasitism, parasitism rates, the relative abundance of each parasitoid species, and mortality of ACGW were calculated. We found that the cold treatment affected both pest and parasitoids, resulting in a reduction in emerging ACGWs and differing ratios of species within the parasitoid community. The striking example was the change in the relative frequency of three species of Eupelmus spp. and of Mesopolobus tibialis, which doubled in thermally-stressed galls in all chestnut fields. The thermal effects on the development of the host and the direct effects of cold temperatures on the surface of galls (i.e., humidity or hardness of the galls) warrant further research in this direction.

The effectiveness of combining strength-specific training with endurance training to enhance the performance of endurance runners remains uncertain. This study aimed to analyze effect of practising maximum-strength (MAX), explosive strength (EXP) or both combined (COMB) on seven runners’ performance-indicators: vertical jump (VJ), one-repetition-maximum-squat (1RM), peak-velocity/peak-running-speed (PV), lactate-threshold (over incremental-test-protocols, LT), middle-distance-time-trial (TT), maximum-oxygen-consumption (VO2max), running-economy (RE). Systematic-review (Scopus, Wed of Science, Sports Discuss, PubMed) with meta-analysis was conducted following PRISMA standards. Inclusion-criteria (PICOS) were: recreational or well-trained athletes aged 18-45 performing concurrent-training ≥five-week. Used search-terms were related to different types of strength/endurance, participants’ age, sport-modality. 20 manuscripts were selected, quality-assessed with PEDro. MAX training is more effective than EXP, COMB in improving VJ, 1RM, PV, while COMB is more effective than MAX, EXP to enhance TT. MAX is more effective than EXP in improving LT. Concurrent-workouts do not provide additional benefits to VO2max. It is unknown which strength-modality (MAX, EXP or COMB) is more effective in improving RE. Concurrent-training is more effective than single-mode-endurance-training for enhancing specific performance-variables in adult-endurance-runners. Middle-, long-distance-runners may consider incorporating MAX-training to target specific goals, e.g., improving VJ, 1RM, LT, PV while utilizing COMB-training to enhance TT. Certain variables may benefit from EXP. New randomized-controlled-trials are required to confirm these findings.

Multicore magnetic nanoparticles of manganese ferrite were prepared using carboxymethyl-dextran and melamine as agglutinating agents. The nanoparticles prepared using melamine exhibit a flower-shape structure, a saturation magnetization of 6.16 emu/g and good capabilities for magnetic hyperthermia. Magnetoliposome-like structures containing the multicore nanoparticles exhibit sizes in the range 250 – 400 nm. A new antitumor thienopyridine derivative was loaded in these nanocarriers with a high encapsulation efficiency of 98% ± 2.6%. Release profiles in absence and presence of an AMF indicate a transport by diffusion, with a maximum compound release of 31% under the AMF. A sustained and controlled drug release in anticipated from the results, pointing to suitable characteristics of the magnetoliposomes for dual cancer therapy (combined magnetic hyperthermia and chemotherapy).

Lignocellulosic biomass is a powerful approach for the production of sustainable biofuels and the further achievement of the goal of biomass conversion into a second-generation clean energy that can cope with the depletion of fossil reserves and rising energy requirements. In the conversion process, a pretreatment is essential to overcome the recalcitrance of the lignocellulosic biomass, accelerate its disintegration into cellulose, hemicellulose, and lignin and, in turn, get an optimal yield of fermentable sugars in the enzymatic hydrolysis. In addition to this, it should be industrially scalable and capable of enhancing fuel properties and feedstock processability. Here, steam explosion technology has stood out due to its results and advantages such as wide applicability, high efficiency in the short term, or lack of contamination in spite of its conventionality. This gentle and fast pretreatment incorporates high temperature autohydrolysis and structural alteration by explosive decompression. Steam explosion method has been one of the most effective especially for the hydrolysis of cellulose from agricultural wastes due to the lower quantity of acetyl groups in the composition of hemicellulose. In this aspect, sugarcane bagasse is a promising feedstock for bioethanol production due to its high cellulosic content and elevated availability. The objective of this review has been to compile the latest information on steam explosion pretreatment, stages, equipment, variables involved, by-products generated, as well as the advantages and disadvantages of the technique. At the same time, its feasibility and viability using sugarcane bagasse as feedstock has been discussed. Finally, the effectiveness of the technique with different feedstocks has been evaluated.

In the whole world, including Mexico, the rising prevalence of diabetes poses significant challenges to healthcare systems, with a notable impact on hospital admissions even being an ambulatory care sensitive condition, that means, hospital admissions are avoidable. Traditional healthcare methodologies have been instrumental in managing diabetes and preventing complications, yet they often face limitations such as merging, cleansing, and outlier analysis of health data to identify and address diseases effectively. This paper aims to address this gap by conducting a comprehensive comparison of the methodologies used in healthcare and data science for this purpose. This work uses hospital diabetes discharge records from 2010 to 2023, a total of 36,665,793 records, which belong to medical units of the Ministry of Health of Mexico. In this work, we seek to provide the arguments why as a data scientist it is mandatory to learn the field of knowledge of the problem and its implications if this is not done, and therefore to disclose insights that can help in policy decisions and reduce the burden of avoidable hospitalizations. The approach is mainly based on the standardization or adjust rates by sex and age groups. This study provides the foundations for a new way of data scientist must deal with health data.

The International System of Units (SI) was adopted in 1960 as a universal measuring system to be used for all areas of science. Sports Science papers have shown lots of inaccurate and inappropriate terms for quantification of athletes’ performance and the psychobiological responses to exercise (e.g., internal load). In biomechanics, external and internal loads are forces acting externally and internally, inducing stress and strain in the biological tissues. Therefore, the current review present simple proposals to correct the inappropriate terms: 1) do not use the term external load when referring to the assessment of exercise time, distance, displacement, speed, velocity, acceleration, torque, work, power, impulse, etc.; 2) do not use the term internal load when referring to the assessment of psychobiological stress markers (i.e., session rating of perceived exertion, heart rate, blood lactate, oxygen consumption, etc.); 3) do not use the term impulse when expressing other calculus than integrating force with respect to time, and neither strain, when expressing other phenomena than the body deformation. Instead, the term exercise intensity is universal and can be used to describe all forms of exercise. Finally, duration should precisely be described according to physical quantities (e.g., time, distance, displacement, speed, velocity, acceleration, force, torque, work, power, impulse, etc.) and the units accomplish by use of the SI. These simple quantifications can be performed for the exercises, sessions, microcycles, mesocycles and macrocycles of the athletes. Such standardization will provide a consistent and clear communication among sports scientists and all areas of science.

Climate and land-use changes have been contributing to increase the occurrence of extreme wild-fires, shifting fire regimes and driving desertification, particularly in Mediterranean-climate regions. However, few studies have researched the effects of land-use change on fire regimes and carbon storage at the broad national scale. To address this gap, we used spatially explicit data from annual burned areas in mainland Portugal to build a typology of fire regimes based on the accumulated burned area and its temporal concentration (Gini index) between 1984 and 2019, which was combined with 2018 carbon stock data (above- and below-ground), and a landscape typology re-sulting from cluster analysis over land-use composition, diversity and configuration, to explore relationships between landscape types and the two major ecosystem services at stake: wildfire reduction and carbon stock. Cross tabulations, logistic and linear regressions were performed on these data and results revealed a strong relationship between landscapes dominated by maritime pine and eucalypt forest plantations and high-hazardous fire regime but hold the highest carbon stock. Shrubland-mixed landscapes were associated with lower carbon stocks but less hazardous fire regimes. Specialized agricultural landscapes, as well as mixed native forests and mixed agro-forestry landscapes, were the least associated with wildfires. In the case of agricultural landscapes however, this good wildfire performance is achieved at the cost of the poorest carbon stock, de-noting land degradation, whereas native forests and agroforestry landscapes strike the best trade-off between carbon stock and fire regime. Our findings support how nature-based solutions promoting wildfire mitigation and carbon stock ecosystem services may prevent and revert land degradation harming Mediterranean regions.

With the current rapid spread of COVID-19, global health systems are increasingly overburdened by the sheer number of people that need diagnosis, isolation and treatment. Shortcomings are evident across the board, from staffing, facilities for rapid and reliable testing to availability of hospital beds and key medical-grade equipment. The scale and breadth of the problem calls for an equally substantive response not only from frontline workers such as medical staff and scientists, but from skilled members of the public who have the time, facilities and knowledge to meaningfully contribute to a consolidated global response. Here, we summarise community-driven approaches based on Free and Open Source scientific and medical Hardware (FOSH) currently being developed and deployed to bolster access to personal protective equipment (PPE), patient treatment and diagnostics.

The crystal structure of a polymorph of Glycyl-L-alanine HI.H2O was synthesized from chiral cyclic Glycyl-L-alanine dipeptide, known to show molecular flexibility in different environments. The space group is polar (P21) and therefore pyroelectricity and optical second harmonic generation properties are allowed by symmetry. We report a pyroelectric coefficient as high as 45 µC/m2K occurring at 345 K, one order of magnitude smaller than the semi-organic ferroelectric Triglycine Sulphate (TGS) crystal. Furthermore, the polymorph displays a nonlinear optical effective coefficient of 0.14 pm/V, around 14 times smaller than the value from a phase-matched inorganic Barium Borate (BBO) single crystal.

: Responsible consumption is defined in environmental, cultural, economic, ethical, and social terms. The subject has been studied for at least 50 years. Currently, the description of the responsible consumer is relevant, given the climatic complications that humanity is facing. Having an instrument to identify responsible food consumption in the adolescent population will make a significant contribution to both the scientific field and group interventions. The objective of this research was to design and validate a scale to measure responsible food consumption in adolescents (Escala de Consumo Responsable de Alimentos en Adolescentes ECRAA) using a sample of 288 junior high school students. The scale has 23 items distributed in four dimensions—knowledge, attitudes, emotions, and practice—and was designed and validated with a cross-sectional study. Aiken's V coefficient was used to validate the content of the scale, a confirmatory factor analysis was used to validate the construct validity, and reliability was measured by calculating Cronbach's alpha. The ECRAA was found to have adequate properties. All 23 items received a positive evaluation from experts. The confirmatory factor analysis supported the structure with favorable goodness-of-fit indices, and the reliability of the data was found to be acceptable. Thus, the ECRAA is valid and reliable for measuring responsible food consumption in adolescents.

Wild rocket plants were cultivated in a plastic greenhouse into two independent sectors, one for soil-bound (SbS) cultivation and another equipped for soilless (ScS) cultivation systems. In both SbS and ScS, the crop was subjected to treatments consisting in a high-compared to a low-input fertilization program (HF and LF treatment, respectively). Water use efficiency (WUE) and partial factor productivity (PFP) for nutrients (N, P, K, Ca and Mg for ScS, and N for SbS) were measured. Rocket leaves, separated for cultivation system and fertilization program, collected at different cuts during the growing cycle, were cold stored at 10 °C until 16 d. At each sampling day (at harvest and during the storage), sensory parameters, respiration rate, dry matter, colour, electrolyte leakage, antioxidant activity, total phenols, total chlorophyll and ammonia content were evaluated. In ScS, the PFP for all nutrients supplied as fertilizers showed a significant increase with the LF treatment, with values higher than 30 % for N, K and Ca. As for the postharvest performance, rocket leaves cultivated in ScS showed better qualitative traits than those cultivated in SbS, as suggested by the lower values of ammonia content and electrolyte leakage recorded at the end of storage in samples grown in ScS. Moreover, in ScS, data showed a lower membrane damage in LF than HF rocket leaves. Finally, regarding total chlorophyll content, even if no effect of treatments was recorded in SbS, rocket cultivated in ScS, showed a better retention of this parameter applying LF than HF treatment. In addition to this, a PLS model (R2 = 0.7) able to predict the cultivation system, using as variables total chlorophyll content no-destructively measured, was implemented.

We employ hierarchy of models (HoM) with 2, 3 and 4 parameters to reanalyze the nucleation kinetics in the electrodeposition as quantified by n(t) - “the number of nuclei vs. time” data obtained at different overvoltages from precise experiments on electrodeposition of Hg on two different types of Pt-cathodes by Ivan V. Markov and Evgenia Stoycheva [1]. The obtained two scales, nmax and , are used to rescale the original data mapping it on a master curve in coordinates . Our main result is obtained by studying further the dependence of these two scales on the overvoltage (analogue of supersaturation). Surprisingly, for one of the two cathode types - the “hemispherical single-crystal electrode” (as defined by the authors), there is discontinuity in the “ vs. overvoltage” dependence – an almost horizontal jump from 85 to 86 mV accompanied by a change in the slope of the dependence - it is ~ -1 and ~ -0.5 after. For the other cathode - “plane structureless platinum electrode”,  decreases smoothly. Combined, these two behaviors point at the so called “cusp catastrophe”. We compare our findings with published results on protein nucleation.

Groundwater is an important resource for many countries and its scarcity is a major concern in small territories, especially in the islands where the constant extraction is creating a high risk of public calamity. This issue has been increasing because of the anthropogenic activities and the climate change and it has called the attention of scientists and stakeholders in order to assess the sustainability of the water management system, and therefore, to establish strategies for a more sustainable water use. San Andres island was taking as case study and a description of the water balance was carried out in order to understand the management system. Then, a water system sustainability assessment was performed with indicators such as water security, water quality, drinking water, sanitation, infrastructure, climate robustness, biodiversity, attractiveness, and governance, according to the City Blueprint Methodology. The result for the 24 evaluated indicators was a score of 3.2, whose interpretation is “an unsustainable water management”. The qualitative assessment was the base to propose water security, water quality, and governance strategies to improve the water management in the island. The assessment and its discussions are relevant for the water management in small islands across the world whose economy is based on the tourism and whose water security is at a high risk.

Starting 1994, the debate for regulating organic agriculture in Brazil was officially recognized in May 1999. Still, only in 2003, when the law # 10,831 was instituted, the country reached an effective milestone on organic production, both internally and externally. Since the industry regulation, the legislation underwent many modifications, constantly reviewing and adjusting. The current study examined the institutionalization of organic production in Brazil and what the current regulations can be used as a reference for those interested in this sector. The most recent update of Organic legislation and its implication on practice were also discussed. A case study on production of strawberry in organic system is presented and discussed.

Braskem is the only company in the world that produces green polyethylenes (HDPE – high density polyethylene and LLDPE – linear low density polyethylene) derived from the dehydration of sugarcane ethanol. Although the performance of green and fossil nominally same polyethylenes are equivalent, commercial clients may use blends of up to 51% of green polyethylenes and 49% of fossil polyethylenes and still have the right to use the I’m greenTM label which appeals to environmental conscious consumers and places these companies in a noticeable position. The Annual Income Statement - AISs from 2010, when Braskem started production of green PE, until 2018, show there was growth of revenues. Despite of the production of polyethylenes have continued stable and the number of green polyethylenes patents have decreased since 2014, the profits with the BRKM5 stocks increased. There is no transparency of how carbon credits were gained and in the AIS. Investments in securities in the Brazilian financial market (BRKM5 and carbon credits) are much more attractive than the investment in new patents, because they generate greater gains (268% increase in the average share price of BRKM5 from 2012 to 2018) and do not require large investments in R&D.

Given the high number of vehicle-crash victims, it has been established as a priority to reduce this figure in the transportation sector. For this reason, many of the recent researches are focused on including control systems in existing vehicles, to improve their stability, comfort and handling. These systems need to know in every moment the behavior of the vehicle (state variables), among others, when the different maneuvers are performed, to actuate by means of the systems in the vehicle (brakes, steering, suspension) and, in this way, to achieve a good behavior. The main problem arises from the lack of ability to directly capture several required dynamic vehicle variables, such as roll angle, from low-cost sensors. Previous studies demonstrate that low-cost sensors can provide data in real-time with the required precision and reliability. Even more, other research works indicate that neural networks are efficient mechanisms to estimate roll angle. Nevertheless, it is necessary to assess that the fusion of data coming from low-cost devices and estimations provided by neural networks can fulfill the reliability and appropriateness requirements for using these technologies to improve overall safety in production vehicles. Because of the increasing of computing power, the reduction of consumption and electric devices size, along with the high variety of communication technologies and networking protocols using Internet have yield to Internet of Things (IoT) development. In order to address this issue, this study has two main goals: 1) Determine the appropriateness and performance of neural networks embedded in low-cost sensors kits to estimate roll angle required to evaluate rollover risk situations. 2) Compare the low-cost control unit devices (Intel Edison and Raspberry Pi 3 Model B), to provide the roll angle estimation with this artificial neural network-based approach. To fulfil these objectives an experimental environment has been set up composed of a van with two set of low-cost kits, one including a Raspberry Pi 3 Model B, low cost Inertial Measurement Unit (BNO055 - 37€) and GPS (Mtk3339 - 53€) and the other having an Intel Edison System on Chip linked to a SparkFun 9 Degrees of Freedom module. This experimental environment will be tested in different maneuvers for comparison purposes. Neural networks embedded in low-cost sensor kits provide roll angle estimations very approximated to real values. Even more, Intel Edison and Raspberry Pi 3 Model B have enough computing capabilities to successfully run roll angle estimation based on neural networks to determine rollover risks situation fulfilling real-time operation restrictions stated for this problem.

Purpose: The goal of this article was to introduce a new technique for root coverage (RC), the Mixed-Thickness Tunnel access (MiTT), approaching a full-split design, showing the results obtained in a case series and demonstrating it step-by-step. Methods: Healthy individuals, non-smokers, and non-diabetics, who were diagnosed with gingival recession (GR) type 1 or 2 (RT1 or RT2). After all necessary evaluations, prophylaxis was performed 14 days before the surgical procedure. Then, after the basics clinical conduct and anesthesia, one or two vertical incision(s) on the mucosa (around 1-2 mm apical to the MGJ), lateral to the papilla base, were done. Initial detachment of the mucosa from the muscles (split design); it was permitted (but not mandatory) to do intrasulcular incisions; from the MGJ to coronal, subperiosteal access was done to raise the full-thickness tunnel. It must communicate up to the gingival sulcus area and the papilla’s base, keeping the papilla’s tip intact. A connective tissue graft was harvested, which was inserted through the linear incision or intrasulcularly. Interrupted sutures were done and may be used as adjunctive material. Results: Nine healthy individuals (7 females and 2 males) aged 19 and 43 years were enrolled. They were treated following the MiTT steps. There were four cases with a single GR, 2 patients with 2 teeth involved, and three with 3 or 4 GR. Seven cases were RT1 and two RT2. All RT1 cases achieved 100% RC, while the mean RC obtained for RT2 was around 80%. Conclusion: MiTT can be considered a more straightforward approach for minimally invasive surgical technique, which is a feasible option to treat RC with a high success rate, predictability, and esthetic preservation. There is a technical sensitivity to performing the full-split design procedure.

In the Kingdom of Saudi Arabia (KSA), residential buildings’ energy consumption accounts for almost 50% of the building stock electricity consumption. The electricity generation consumes over one-third of the daily oil production. KSA was ranked as one of the highest countries in fossil fuel consumption per capita in 2014. Moreover, the KSA’s economy heavily relies on fossil fuel sources, namely oil reservoirs, whereby depletion will negatively affect the future development of the country. The total electricity consumption is annually growing by approximately 5-8%, which would lead to identical oil consumption to oil production in 2035. Currently, the KSA government is concerned to generate more renewable energy using large renewable energy plants. The government is investing in energy generation through renewable sources, by financing large scale photovoltaic farms to stop an economic crisis that may occur in 2035. The existing building stock consumes around 80% of the total current Saudi electricity that is generated. According to the Saudi energy efficiency report, the primary energy consumption per capita is over three times higher than the world average. Therefore, the residential buildings need further assessment as to their current energy consumption. This research used a survey to explore current user behaviour in residential buildings energy performance in the city of Jeddah, KSA. The findings of the survey showed: • The buildings thermal properties were found to be poorly designed • The majority of users within the buildings prefer a room temperature of below 24 °C, which requires a massive amount of cooling • Due to the climate conditions and the cultural aspects of KSA, housing units are occupied for more than 18 hours per day • An increase in user awareness has helped to slightly improve residential buildings energy efficiency Knowing the current high energy consumption sources and causes and being able to define available opportunities for further developments on building thermal properties enhancements and how to increase user awareness to reach self-sustaining buildings is essential.

The use of commodity polymers such as polypropylene (PP) is key to open new market segments and applications for the additive manufacturing industry. Technologies such as powder-bed fusion (PBF) can process PP powder; however, much is still to learn concerning process parameters for reliable manufacturing. This study focusses in the process-property relationships of PP using laser-based PBF. The research presents an overview of the intrinsic and the extrinsic characteristic of a commercial PP powder as well as fabrication of tensile specimens with varying process parameters to characterize tensile, elongation at break, and porosity properties. The impact of key process parameters, such as power and scanning speed are systematically modified in a controlled design of experiment. The results were compared to the existing body of knowledge; the outcome is to present a process window and optimal process parameters for industrial use of PP. The computer tomography data revealed a highly porous structure inside specimens ranging between 8.46% and 10.08%, with porosity concentrated in the interlayer planes in the build direction. The results of the design of experiment for this commercial material show a narrow window of 0.122 ≥ Ev ≥ 0.138 J/mm³ led to increased mechanical properties while maintaining geometrical stability.

Iron deficiency anemia (IDA) is highly prevalent in the Cote d’Ivoire, and has severe health and economic consequences. In this paper, we apply a health economic model to quantify the burden of IDA, and the contribution of nation-wide mandatory iron fortification of wheat flour and voluntary iron fortification of condiments to the reduction of this burden. The analysis for the population from six months to 64 years builds on published reviews and publicly available datasets, and is stratified by age-groups and socio-economic strata. Without the impact of these fortification strategies, the annual burden of IDA is estimated at 242,100 disability adjusted life years (DALYs) and 978.1 million USD. Wheat flour and condiment fortification contributed to a reduction of the IDA burden by approximately 5% each. In places with high prevalence of malaria and environmental factors, such as the Côte D’Ivoire, policy makers should combine nutritional intervention with infectious disease prevention and environmental factors. The findings of this study provide additional input for policy makers about the magnitude of the impact and can support the conception of future fortification strategies.

Coronavirus disease 2019 (COVID-19) is a potentially serious acute respiratory infection caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). Since the World Health Organization (WHO) declared COVID-19 a global pandemic, the virus has spread to more than 200 countries with more than 500 million cases and more than 6 million deaths reported globally. It has long been known that viral respiratory tract infections predispose patients to bacterial infections and that these co-infections often have an unfavourable clinical outcome. Moreover, nosocomial infections, also known as health care-associated infections (HAIs), are those infections that are absent at the time of admission and acquired after hospitalization. However, the impact of coinfections or secondary infections on the progression of COVID-19 disease and its lethal outcome is still debated. The aim of this review was to assess the literature on the incidence of bacterial co-infections and superinfections in patients with COVID-19. The review also highlights the importance of the rational use of antibiotics in patients with COVID-19 and the need to implement antimicrobial stewardship principles to prevent the transmission of drug-resistant organisms in healthcare settings. Finally, alternative antimicrobial agents to counter the emergence of multidrug-resistant bacteria causing healthcare-associated infections in COVID-19 patients will also be discussed.

Drying food involves complex physical atmospheric mechanisms with non-linear relations from the air-food interactions and those relations are strongly dependent on the moisture contents and the type of food. Such dependence makes it complex to design suitable dryers dedicated to a single drying process. To streamline the design of a novel compact food-drying machine, a heat pump dryer component design optimization algorithm was developed as a subprogram of a Computer Aided Engineering tool. The algorithm requires inputting food and air properties, the volume of the drying container and the technical specifications of the heat-pump off-the shelf components. The heat required to dehumidify the food supplied by the heat exchange process from condenser to evaporator, and the compressor’s requirements (refrigerant mass flow rate and operating pressures) are then calculated. Compressors can then be selected based in the volume and type of food to be dried. The algorithm is shown via a flow chart to guide the user through 3 different stages: Changes in drying air properties, Heat flow within dryer and Product moisture content. Example results of how different compressors are selected for different type of produces and quantities (Agaricus Blazei mushroom with 3 different moisture contents or fish from Thunnini tribe) conclude this article.

Background. The measurement of physical performance constitutes an indicator of physical functional capacity and allows the design of physical exercise programs adapted to the individual abilities and needs of older adults with and without frailty. Aim. To present a synthesis of knowledge on the effect of exercise programs on physical performance in older adults with and without frailty in the community. Method. A systematic review was carried out in accordance with the PRISMA-2020 criteria. The search for articles was made until May 4, 2023 in PubMed, Scopus, Web of Science, Cochrane Library, SciELO and LILACS. The outcome variable was physical performance, measured through the SPPB (Short Physical Performance Battery). The mean difference (MD) was estimated to evaluate the effect. Results. We found 2,483 studies, of which 12 met the eligibility criteria for the systematic review and 9 for the meta-analysis. The effect of exercise on SPPB score was significantly higher in the exercise group compared to control in non-frail older adults with MD=0.51 [95% CI, 0.05 to 0.96, p&lt;0.05]. Likewise, in older adults with frailty, the effect of exercise on the global SPPB score was significantly higher in the exercise group compared to the control with an MD=0.66 [95% CI, 0.09 to 1.24, p&lt;0.05 ]. Conclusion. Our findings suggest that exercise programs are effective in increasing and/or maintaining physical performance in older adults with and without frailty, whose effect is more evident in older adults with frailty, probably due to the greater margin of recovery of intrinsic capacity.

The current challenges in the food packaging field are, on one side, replacing plastic from non-renewable sources with biopolymers and, on the other hand, generating a packaging material with attractive properties for the consumer. Nowadays, the consumer is concerned ecologically; the food packaging industry must ahead satisfy their needs. In this sense, incorporating several compounds with properties such as antioxidant, antimicrobial, or nutraceutical properties results attractive for the consumers. However, many of these properties can be diminished, so an encapsulation system is required. A good encapsulating system is crucial for these purposes, so polyelectrolyte complexes (PECs) can be used with that finality. Nowadays, PECs are eye-catching in many fields because of their fascinating properties, which make them very attractive, mainly for being used as encapsulating systems. Hence, this paper reviews the use of PECs in food packaging where chitosan forms polyelectrolyte complexes.

A methodology based on the concepts that arise from Density Functional Theory named Conceptual Density Functional Theory (CDFT) was chosen for the calculation of some global and local reactivity descriptors of the Discodermins A-H family of marine peptides through the consideration of the KID (Koopmans in DFT) technique that was successfully used in previous studies of this kind of molecular systems. The determination of active sites of the studied molecules for different kind of reactivities was achieved by resorting to some CDFT-based descriptors like the Fukui functions as well as the Parr functions derived from Molecular Electron Density Theory (MEDT). A few properties identified with their ability to behave as a drug and the bioactivity of the peptides considered in this examination were acquired by depending on a homology model by studying the correlation with the known bioactivity of related molecules in their interaction with various biological receptors. With the further object of analyzing their bioactivity some parameters of usefulness for future QSAR studies, their predicted biological targets and the the ADME (Absorption, Distribution, Metabolism, and Excretion) parameters related to the Discodermins A-H pharmacokinetics are also reported.

Drone navigation is critical, particularly during the initial and final phases, such as the initial ascension, where pilots may fail due to strong external disturbances that could lead to a crash. In this ongoing work, a drone has been successfully trained to perform an ascent of up to 6 meters with external disturbances simulating wind pushing it up to 24 mph, with the DQN algorithm managing external forces affecting the system. It has been demonstrated that the system can control its height, position, and stability in all three axes (roll, pitch, and yaw) throughout the process. The learning process is carried out in the Gazebo simulator, which emulates interferences, while ROS is used to communicate with the agent.

This work presents a heat transfer and boiling model that computes the evolution of the temperature field in a representative steel workpiece quenched from 850 or 930°C by immersion in water flowing at average velocities of 0.2 or 0.6 m/s, respectively. Under these conditions, all three boiling regimes were present during cooling: stable vapor film, nucleate boiling, and single-phase convection. The model was based on the numerical solution of the heat conduction equation coupled to the solution of the energy and momentum equations for water. The mixture phase approach was adopted using the Lee model to compute the rates of water evaporation-condensation. Heat flux at the wall was calculated for all regimes using a single semi-mechanistic model. Therefore, evolution of boiling regimes at every position on the wall surface was automatically determined. Predictions were validated using laboratory results, namely: a) Videorecording the upward motion of the wetting front along the workpiece wall surface, and b) cooling curves obtained with embedded thermocouples in the steel probe. Wall heat flux calculations were used to determine the importance of the simultaneous presence of all three boiling regimes on the heat flux distribution. It was found that this simultaneous presence leads to high heat flux variations that should be avoided in production lines.

N,N-dimethyl-4-nitroaniline (NNDM4NA, C8H10O2N2), is a superelastic and superplastic charge-transfer molecular crystal with a high molecular dipole moment, µ=7.95 D, which crystal-lizes in the acentric polar point group 2. Highly aligned poly-l-lactic acid (PLLA) polymer micro-fibers with embedded NNDM4NA nanocrystals were fabricated using the electrospinning tech-nique. The composite fibers display an extraordinarily high piezoelectric output response, where for a small stress of 5.0x103 Nm-2, an effective piezoelectric voltage coefficient of geff=3.6 VmN-1 was obtained. The fibers were found to display solid state blue fluorescence with a long (147 ns) life-time decay. Furthermore, the composite fibers exhibit an average increase of 67% on the Young modulus reaching 55 MPa, while the tensile strength reaches 2.8 MPa when compared with solely PLLA fibers. The results show that nanocrystals, from small organic molecules, with elastic and piezoelectric properties form hybrid functional 2-dimensional luminescent array which are me-chanical strong and generate high output voltages making them promising for applications in energy harvesting and as solid-state blue emitters.

Despite much published literature on the impacts of agriculture on water quality, knowledge gaps persist regarding which farming systems are of most concern for these relationships, which could help water resource planners better target water management efforts. This study addresses these subjects, seeking to understand how this relationship varies across different farming systems. We used data on water quality status in watersheds of an agricultural region in southern Portugal and crossed it with a map of farming systems for the same region provided by a previous study. By overlaying both data layers, we characterized the areal shares of the farming systems in the watersheds and inspected how these shares relate with water quality status through logistic regression. Results support that the impact of agriculture on water quality is mostly related with specific farming systems. We believe this type of information can be of high interest for agricultural planners and policymakers interested in meeting water quality standards, and we conclude by suggesting innovative policy options based on payments to farmers operating selected farming systems, as a cost-effective way to reconcile agricultural and environmental policy objectives.

Port state control inspections implemented under the Paris Memorandum of Understanding (MoU) have become known as one of the best instruments for maritime administrations in European Union (EU) Member States to ensure that the ships docked in their ports comply with all maritime safety requirements. This paper focuses on the analysis of all inspections made between 2013 and 2018 in the top ten EU ports incorporated in the Paris MoU (17,880 inspections). The methodology consists of a multivariate statistical information system (STATIS) analysis using the inspected ship’s characteristics as explanatory variables. The variables used describe both the inspected ships (classification society, flag, age and gross tonnage) and the inspection (type of inspection and number of deficiencies), yielding a dataset with more than 600,000 elements in the data matrix. The most important results are that the classifications obtained match the performance lists published annually by the Paris MoU and the classification societies. Therefore, the approach is a potentially valid classification method and would then be useful to maritime authorities as an additional indicator of a ship’s risk profile to decide inspection priorities and as a tool to measure the evolution in the risk profile of flag over time.

Background: Exercise is an accepted intervention to improve the quality of life (QoL) of breast cancer patients. Exercise programs have been developed and all have shown satisfactory results in improving QoL. There is a lack of research comparing different prescription modalities. The aim of this study is to evaluate the effectiveness of physical exercise (in-person, home-based, prescription) on QoL in breast cancer patients actively undergoing treatment; Methods Quasi-experimental study with randomized assignment to three groups (in-person: guided and supervised in-person exercise program; home-based exercise: guided and supervised exercise program with streaming monitoring; recommendation: exercise recommendation). Quality of life was measured using the QLQ-C30 questionnaire. Baseline and 24-week analysis. Results: The total sample analyzed was n=80. QoL improved significantly at 24 weeks in the face-to-face and home-based exercise groups, but not in the advice group. Exercise in all modalities improved fatigue, nausea, vomiting, appetite, and constipation. QoL at 24 weeks depended on active chemotherapy, tumor type, and assigned exercise group (r2 = 0.503; p &lt; 0.001). Conclusions: QoL in breast cancer patients undergoing active treatment improves after a 24-week exercise program, especially in face-to-face and home-based exercise. Home-based exercise, streaming-based recommendation is a viable option for exercise recommendation.

Lifestyle has been associated with breast cancer risk through different pathways, including oxidative stress. Antioxidant enzymes are endogenous defense mechanisms against oxidative stress damage, and this response might be modulated by the genetic variation in these enzyme-codifying genes. This study aimed to analyze the synergistic effect of an antioxidant Healthy Lifestyle Index (HeLiX) composed of principal components of Western dietary pattern, alcohol consumption, smoking and physical activity, and genetic polymorphisms in the first-line antioxidant response family genes SOD, GPX, and CAT on breast cancer risk. We included 176 SNPs, and only CAT rs554576 remained significant after correction for multiple comparisons. Breast cancer odds were reduced at the highest (T3) and medium (T2) tertiles of the HeLiX. When stratified by HeLiX, we observed a reduced risk of breast cancer with at least one T-allele, and the effect increased in a dose-dependent manner. Compared to the reference category (HeLiX T1 and AA genotype), women at the HeLiX T3 with AT and TT genotypes in postmenopausal women showed an OR = 0.15 (95% CI 0.07–0.32). For HeLiX T2 and AT genotype OR = 0.26 (95% CI 0.13–0.54); for TT genotype OR = 0.24 (95% CI 0.12–0.45). For premenopausal women, at the HeLiX T3 and AT genotype OR = 0.29 (95% CI 0.13–0.62); for the TT genotype OR = 0.21 (95% CI 0.08–0.51). We also observed an inverse association for HeLiX T2 and TT genotype (OR 0.39 95% CI 0.17–0.87). Our study shows a significant synergistic gene-environment interaction on an additive scale, contributing to understanding pathways involved in breast cancer etiology and prevention.

This research proposes an algorithm to sign messages using the ElGamal asymmetric cryptosystem, called: Digital signature algorithm based on ElGamal, Diffie-Hellman protocol and the number π (DSAπ). This proposal has a high level of security like the DSA standard, in addition, execution times are reduced in relation to it. The Diffie-Hellman protocol and the number π were used in the construction of the digital signature algorithm in conjunction with the Hash-Sha-512 function. Some experiments are presented to provide evidence that the bits on the right side of the decimal point of π appear randomly, such as: a color image was constructed of a string of consecutive bits chosen at random, of the number π. Subsequently, parameters such as: entropy, correlation, discrete Fourier transform, goodness-of-fit test χ2 were evaluated. It is mentioned that an S-box 8×8 is involved in the signature. The sensitivity of the signature was measured, that is, when small changes are made to the sender’s private key, or small changes to the message. Finally, an image was constructed using the signatures of random texts, and subsequently the randomness of its pixels was obtained, to verify that there is no relationship between the different signatures.

Effective control of domain walls or magnetic textures in antiferromagnets promises to enable robust, fast, and non-volatile memories. The lack of net magnetic moment in antiferromagnets implies the need for creative ways to achieve such a manipulation. Here, we investigate changes in magnetic force microscopy (MFM) imaging and in magnon-related mode in Raman spectroscopy of virgin NiO films under a microwave pump. After the MFM and Raman studies, a combined action of broadband microwave (0.01-20 GHz, power scanned from −20 to 5 dBm) and magnetic field (up to 3 kOe) were applied to virgin epitaxial (111) NiO and (100) NiO films grown on (0001) Al2O3 and (100) MgO substrates, following which the MFM and Raman studies were repeated. We observed a suppression of the magnon-related Raman mode subsequent to the microwave exposure. Based on MFM imaging, this effect appears to be caused by the suppression of large antiferromagnetic domain walls due to the possible excitation of antiferromagnetic spin oscillations localized within the antiferromagnetic domain walls.

_{he present study was conducted to quantify the heavy metals cadmium, lead, copper, chromium, nickel, and zinc in the bivalve mollusk concha prieta (Anadara tuberculosa) using in- ductively coupled plasma optical emission spectroscopy (ICP-OES). This research aims to identify whether the bioaccumulate content of heavy metals exceeds the maximum limits established by various public health bodies such as the ONU, FAO, Codex Alimentarius, EEC, and NHI. Samples of the species were collected randomly from three locations in Puerto El Morro, Playas Municipal Market, and La Libertad Seafood Market in the Gulf of Guayaquil. Thirty-three soft tissue samples of (Anadara tuberculosa) were evaluated, and the values quantified in mg/kg were in the following order: Zn>Cu>Cd>Ni>Cr>Pb.}

Here, applying the theory of the generalization of the Boltzmann constant in curved space-time, we will model the mechanism by which elementary particles are formed. We will determine the relationship between gravity and each of the elementary particles that form the standard model following analogies to that of stellar bodies. In order to achieve our goal, we will propose new models for photons, quarks and gluons; with this, we will demonstrate why there are stable and unstable elementary particles; why the first family of elementary particles forms hadrons and why the second and third families cannot form hadrons; why the fermions comply with the Pauli exclusion principle and why the bosons do not comply with the Pauli exclusion principle, etc. Finally, we will analyse the generalization of the ADS/CFT correspondence and propose a theory of everything (T.O.E.).