Background: The prevalence of human T-lymphotropic virus type-1 (HTLV-1) infection is higher in women, and sexual intercourse has been described as an important route of male-to-female transmission. The present study aimed to quantify HTLV-1 proviral load (PVL) in vaginal fluid, and to investigate correlations with PVL in peripheral blood mononuclear cells (PBMC). Methods: HTLV-1-infected women were consecutively recruited at a multidisciplinary center for HTLV patients in Salvador-Brazil. All women underwent gynecological examinations to obtain cervicovaginal fluid and venipuncture for blood collection. PVL, as measured by real-time quantitative polymerase chain reaction (RT-qPCR), was expressed as the number of copies of HTLV-1/106 cells in blood and vaginal fluid samples. Light microscopy was used to assess cervicovaginal cytopathology and vaginal microbiota. Results: In the 56 included women (43 asymptomatic carriers and 13 diagnosed with HTLV-associated myelopathy/tropical spastic paraparesis-HAM/TSP), mean age was 35.9 (SD±7.2) years. PVL was higher in PBMCs [median: 23,264 copies/106 cells (IQR: 7,420 - 64,371)] than in vaginal fluid [451.9 copies/106 cells (IQR: 0 - 2,672)] (p<0.0001). PVL in PBMCs was observed to correlate directly with PVL in vaginal fluid (R=0.32, p=0.01). PVL was undetectable in vaginal fluid samples from 20 women (35.7%), most of whom were asymptomatic (19/20). Cytopathologic analyses revealed no differences between women with detectable or undetectable PVL. Conclusion: HTLV-1 proviral load is detectable in vaginal fluid and correlates directly with proviral load in peripheral blood. This finding suggests that sexual transmission of HTLV-1 from female to male may occur and vertical transmission, particularly in the context of vaginal delivery.

This study describes the synthesis, and characterization of lead-free organic ferroelectric perovskite N-methyl-N’-diazabicyclo[2.2.2]octonium)-ammonium trichloride (MDABCO-NH4Cl3). The electrospinning technique was employed to obtain nanofibers embedded with this perovskite into PVC polymer for hybrid fiber production. The dielectric, piezoelectric and pyroelectric properties of these fibers were carefully examined. From measurements of the dielectric permittivity temperature and frequency dependence, together with the pyroelectric results, a transition from a high temperature paraelectric to a ferroelectric phase that remained down to room temperature, was found to occur at 438 K. A pyroelectric coefficient as high as 290 C K-1 m-2value obtained is within the same order of magnitude as that reported for MDABCO-NH4I3 and the semiorganic ferroelectric triglycine sulfate (TGS). The hybrid nanofibers exhibited good morphological characteristics and demonstrated very good piezoelectric properties. Specifically, a piezoelectric coefficient of 42 pC/N was obtained when a periodical force of 3 N was applied. The performance of these fibers is on par with materials discussed in the existing literature for fabrication of nano energy harvesting generators. Importantly, the perovskite nanocrystals within the fibers not harmed by oxidation, making them a promising environmentally friendly platform for flexible energy harvesting.

Verminosis causes great damage to the producer, with reduced milk production and decreased development of young animals. The use of bioproducts are an alternative to control worms. This study evaluated the effects of oral administration of one commercial formulations, based on the fungus Duddingtonia flagrans (Bioverm®) and experimental formulations D. flagrans associated with Pochonia chlamydosporia, on the control of worms in naturally infected cattle on February pasture to October 2021. Eighteen Holstein x Zebu cattle were divided into groups of six animals (group 1 Bioverm®, group 2 Association and control), separated into paddocks naturally infected with helminth larvae (L3). The parasite load was by means of fecal samples and pasture collection to determine L3 infestation. The study demonstrated low recovery of L3 in the pasture due to low rainfall during the experiment. The EPG was lower in groups 1 and 2 compared to the control in April, May and July, while in March the values were lower only in treatment 1 compared to the control. Individual or combined administration of fungal products reduced the presence of eggs and larvae in pastures at certain months of the year, indicating their effectiveness in the strategic control of gastrointestinal parasites in cattle.

Lead-free ferroelectric perovskite N-methyl-N'-diazabicyclo[2.2.2]octonium)–ammonium triio-dide, MDABCO-NH₄I₃, nanocrystals are embedded in three different polymer fibers fabricated by the electrospinning technique. The nanofibers, which are very flexible and have a high Young modulus, behave as active piezoelectric energy harvesting sources that produce a piezoelectric voltage coefficient up to geff = 3.6 VmN-1 and show a blue intense luminescence band at 325 nm. In this work, the pyroelectric coefficient is reported for the MDABCO-NH₄I₃ perovskite inserted in electrospun fibers. At the ferroelectric-paraelectric phase transition, the embedded nanocrystals display a pyroelectric coefficient as high as 194×10-6 Cm-2k-1, within the same order of magnitude as that reported for the state-of-the-art bulk ferroelectric triglycine sulfate (TGS). The perovskite nanocrystals embedded into the polymer fibers remain stable, and no degradation is caused by oxidation.

Nutraceuticals are bioactive compounds present in foods, utilized to ameliorate health, prevent diseases, and support the proper functioning of the human body. They have gained attention due to their ability to hit multi-targets and act as antioxidants, anti-inflammatory agents, and modulators of immune response and cell death. Therefore, nutraceuticals are being studied to prevent and treat liver ischemia–reperfusion injury (IRI). This study evaluated the effect of a nutraceutical solution formed by resveratrol, quercetin, omega-3 fatty acid, selenium, ginger, avocado, leucine, and niacin on liver IRI. IRI was performed with 60 min of ischemia and 4 hours of reperfusion in male Wistar rats. Afterward, the animals were euthanized to study hepatocellular injury, cyto-kines, oxidative stress, gene expression of apoptosis-related genes, TNF-alpha and Caspase 3 proteins, and histology. Our results show that the nutraceutical solution was able to decrease apoptosis and histologic injury. The suggested mechanisms of action are a reduction in gene expression and the Caspase 3 protein and a reduction in the TNF-alpha protein in liver tissue. The nutraceutical solution was unable to decrease transaminases and cytokines. These findings suggest that the nutraceuticals used favored the protection of hepatocytes and their combination represent a promising therapeutic proposal against liver IRI.

The potential use of nanostructured dipeptide self-assemblies in materials science for energy harvesting devices is a highly sought-after area of research. Specifically, aromatic cyclo-dipeptides containing tryptophan have garnered attention due to their wide-bandgap semiconductor properties, high mechanical rigidity, photoluminescence, and nonlinear optical behavior. In this study, we present the development of a hybrid system comprising biopolymer electrospun fibers incorporated with the chiral cyclo-dipeptide L-Tryptophan-L-Tyrosine. The resulting nanofibers are wide-bandgap semiconductors (bandgap energy 4.0 eV) and consist of self-assembled nanotubes embedded within a polymer matrix, exhibiting intense blue photoluminescence. Moreover, the cyclo-dipeptide L-Tryptophan-L-Tyrosine incorporated into polycaprolactone nanofibers displays a strong effective second harmonic generation signal of 0.36 pm/V and also shows notable piezoelectric properties with a high effective coefficient of 22 pCN−1. These hybrid systems hold great promise for applications in the field of nanoenergy harvesting and nanophotonics.

The crystal structure of a polymorph of Glycyl-L-alanine HI.H2O was synthesized from chiral cyclic Glycyl-L-alanine dipeptide, known to show molecular flexibility in different environments. The space group is polar (P21) and therefore pyroelectricity and optical second harmonic generation properties are allowed by symmetry. We report a pyroelectric coefficient as high as 45 µC/m2K occurring at 345 K, one order of magnitude smaller than the semi-organic ferroelectric Triglycine Sulphate (TGS) crystal. Furthermore, the polymorph displays a nonlinear optical effective coefficient of 0.14 pm/V, around 14 times smaller than the value from a phase-matched inorganic Barium Borate (BBO) single crystal.

Research has shown that hands-on projects promote stem education, namely, via problem-solving. CanSat, literally 'satellite in a can', is a stem educational project promoted by the European Space Agency. This paper addresses this issue by researching this STEM project, which demonstrates how problem-solving can be achieved in secondary-level students within the framework of the CanSat. We use qualitative techniques of data collection and analysis. The results showed that students use sophisticated thinking strategies to process information within this interdisciplinary project: (a) cognitive testing, cognitive organization, cognitive regulation, and monitoring, in addition to computer language and physical–mathematical calculations, are cognitive and metacognitive behavior strategies revealed in the CanSat; (b) problem-solving was suggested as a specific model, where students’ higher cognitive and metacognitive ordering processes deepen in project development; (c) computational, lateral, or divergent and convergent thinking were detected as thinking types of students associated with and mobilized in the course of problem-solving, The findings of this research have practical implications for STEM education in space science. Hands-on projects using problem-solving are an essential strategy to promote STEM education. Additionally, they are a starting point to promote meaningful learning and new thinking types.

N,N-dimethyl-4-nitroaniline (NNDM4NA, C8H10O2N2), is a superelastic and superplastic charge-transfer molecular crystal with a high molecular dipole moment, µ=7.95 D, which crystal-lizes in the acentric polar point group 2. Highly aligned poly-l-lactic acid (PLLA) polymer micro-fibers with embedded NNDM4NA nanocrystals were fabricated using the electrospinning tech-nique. The composite fibers display an extraordinarily high piezoelectric output response, where for a small stress of 5.0x103 Nm-2, an effective piezoelectric voltage coefficient of geff=3.6 VmN-1 was obtained. The fibers were found to display solid state blue fluorescence with a long (147 ns) life-time decay. Furthermore, the composite fibers exhibit an average increase of 67% on the Young modulus reaching 55 MPa, while the tensile strength reaches 2.8 MPa when compared with solely PLLA fibers. The results show that nanocrystals, from small organic molecules, with elastic and piezoelectric properties form hybrid functional 2-dimensional luminescent array which are me-chanical strong and generate high output voltages making them promising for applications in energy harvesting and as solid-state blue emitters.

The purpose of this review is to provide an overview of brain arteriovenous malformations (AVMs) and focus on their management. The therapeutic options differ in each case depending on the location, size, and adjacent anatomical content of the AVM. The surgical resection by microsurgery is the preferred therapeutic option for a small and superficial AVM not related to an eloquent area (e.g., Spetzler-Martin grades I and II). On the other hand, when facing a very large AVM (e.g., Spetzler-Martin grades IV and V), the conservative and symptomatic treatment remains the most common management option due to the high risk-benefit ratio of any intervention. The management of AVMs with features between these two extremes (e.g., Spetzler-Martin grade III) remains less stablished. Stereotactic radiosurgery usually is the option for deep and small AVMs. Embolization has been usually considered before surgery for occlusion of deep arterial supplies of an AVM or to decrease its nidus size. Young patients and AVMs with compact nidus are features that weight in favor of a surgical approach. For the minority of cases that have the AVM diagnosed before bleeding the most common recommendation is to treat conservatively and particularly to avoid embolization. In summary, surgery is the gold-standard approach to cure an AVM and the choice for small AVMs located in non-eloquent area and with superficial venous drainage; large AVMs are mostly treated conservatively; the treatment of AVM with intermediate features is tailored, chosen with the guidance of classification systems, and encompasses radiosurgery and pre-operative embolization.

Synthesizing evolution in the post-Darwinan era has been a very challenging endeavor, both because of the great number of perspectives regarding the same natural phenomena and because of the growing technology involving mapping the origin of novelties and selection of biological variation that surpass Darwin’s original proposal of evolution by means of natural selection. Since 1859 a lot has changed, and many have presented new perspectives on evolution; either dismissing, correcting or incorporating Darwin’s ideas. This review aims to approach these different theories focusing on virus host interactions and descriptions of host-switching events in 3 different viral lineages, as well as their implications on the understanding of host-switching phenomena itself.

This study examines the prospective association of egg consumption with multiple domains of cognitive function in older, community-dwelling men and women followed 16.3 years. Participants were 617 men and 898 women from the Rancho Bernardo Cohort aged 60 and older who were surveyed about egg intake/week in 1972-74, and attended a 1988-91 research visit when cognitive function was assessed with 12 tests. Analyses showed that egg intake ranged from 0-24/week (means: men=4.23.2, women=3.52.7, p<0.0001). In men, covariate-adjusted regressions showed egg intake was associated with better performance on Buschke total (p=0.04), long-term (p=0.02) and short-term (p=0.05) recall. No significant associations were observed in women (p’s>0.05). Analyses in those <60y at in 1972-74 showed egg intake was positively associated with scores on Heaton copying(p<.04) and the Mini-Mental Status Exam(MMSE;p<.02) in men, and category fluency(p<0.05) in women. Egg intake was not significantly associated with odds of poor performance on MMSE, Trails B, or category fluency in either sex. These reassuring findings suggest there are no long-term detrimental effects of egg consumption on multiple cognitive function domains, and for men, there may be beneficial effects for verbal episodic memory. Egg consumption in middle-age may also be related to better cognitive performance later in life.

There have been a great number of investigations about the influence of weak magnetic fields on biological systems, such as isolated cells and whole organisms. This is also a subject of considerable medical concern since old epidemiologic observations have indicated a possible tumorigenic effect of these fields. Their mechanism of action, however, is not firmly established. A large number of biological effects of electromagnetic fields have been attributed either to the production of reactive oxygen species (ROS) or to the entrance Ca²⁺ in the cell. A new biochemical pathway is proposed that covers these two possibilities: the primary effect of the magnetic field would be by the mechanism of radical pairs resulting in the production of ROS; these could activate the ion channels TRPM2 producing cellular inflow of Ca²⁺, which would induce the calcium dependent effects. Thus, a large number of biological effects observed up to the present could be explained.

After the ban on tributyltin-based antifouling paints, DCOIT (4,5-Dichloro-2-octylisothiazol-3(2H)-one) became one of the most used antifouling biocides. DCOIT is a pseudo-persistent contaminant in port areas and is toxic to non-target species, but its ability to bioaccumulate and be transferred along the trophic chain remains unknown. This study aimed to preliminarily investigate the bioaccumulation, trophic transfer, and biomagnification of DCOIT and SiNC-DCOIT (DCOIT immobilized in silica mesoporous nanocapsules) from the microalga Tetraselmis chuii to the mussel Mytilus galloprovincialis during exposure experiments considering 24 h of uptake followed by 72 h depuration. Mussels rapidly internalized and metabolized both DCOIT and SiNC-DCOIT. The predator-prey biomagnification factors (BMFTL) suggested that both forms of the biocide can be trophically transferred, with higher concentrations of DCOIT and SiNC-DCOIT in mussels than in microalgae (BMFTL &gt; 1). However, the bioaccumulation and bioconcentration factors indicated a low bioaccumulation capability in the short term, suggesting that the depuration rate overcomes the uptake. Our findings contribute to the development of environmental risk assessments for DCOIT and SiNC-DCOIT, but do not exclude the possibility of DCOIT bioaccumulation in the long-term in areas with constant input of DCOIT. Further studies are needed to understand these processes under continuous exposure scenarios to DCOIT.

DFT-D3 calculations based on structural X-ray diffraction data obtained for 3-oxo-camphorsulfonyl imine (1), camphorsulfonyl chloride (2) and seven camphor sulfonimines (O2SNC10H13NR, L1-L7) from which L2 (R=4-OHC6H4), L4 (R=4-ClC6H4) and L6 (R=3,5-(CH3)2C6H3) are new, provide information into the intra and inter molecular interactions with concomitant elucidation of the supramolecular arrangement of the compounds. The DFT D3 calculations performed in small clusters of 2 or 3 molecular units reproduce the interactions observed by X-ray analyses showing that as a general trend the structural arrangement of the molecules is driven by electronic rather than by packing parameters. In all compounds the self-assembly of 3D structures involves the sulfonyl imine group ( NSO2) either to establish hydrogen bonds, through the oxygen atoms or non-classic oxygen-aliphatic hydrogen or non-bonding interactions (NBI) which also involve the sulfonyl oxygens. Interestingly, the camphor sulfonimine compounds (L2, L3) having protic groups (R=C6H4X: X=OH, L2 or X=NH2, L3) at the aromatic imine substituents (=NR) present an extra π-π stacking which is absent in the other compounds aromatic derivatives. The X-ray analysis shows that all the reported camphor sulfonimine compounds display the E configuration with respect to the imine substituent (R). The study of the redox behavior of the compounds by cyclic voltammetry allows an insight into the solution properties of the compounds and the rationalization of the molecular interactions that stand in the solid and solution states. Camphor sulfonimine compounds (L) display appropriate binding atoms to coordinate transition metals. The herein results show that monodentate coordination through the nitrogen atom of the sulfonimine 5-membered ring to the {Ag(NO3)} metal center is favored. When this imine nitrogen atom is not itself involved in the Organic Framework DFT-D3 calculations shows that the complexation does not affect the non-covalent interactions that are reproduced in the MOF structure.

Background. Telegram, an Industry 4.0 style Russian-born communication service, is one of the world’s most widespread communication platforms despite Putin’s censorship. The availability of channels and bots has opened as a broadcast channel for any media outlet. Objetives. We asked the following questions: Do Spanish media outlets use Telegram channels? Which media outlets? Are they verified? What is their volume of subscribers? Can this information be used to rank media outlets? We identified many media channels and numerous variables were collected from each one. Results and conclusions. Forty-two Spanish media outlets have Telegram channels, 26 of which are ranked in the directory. Less than half of these channels are verified by the platform, and only three are linked to their website. This lack of verification could lead to the proliferation of fake channels. We created a ranking, and the top-10 includes two foreign, six national, and two regional media outlets.

Experimental studies of degradation of two ribonucleosides (guanosine and uridine) were carried out by making use of mechanochemistry. Mechanochemical experiments reveal the decomposition of guanosine and uridine promoted by nickel(II) and carbonate ions into guanine and uracil, respectively which were identified by HPLC and 1H NMR spectroscopy (this applied only to uracil). Additionally, DFT methodologies were used to probe the energetic viability of several degradation pathways, including in the presence of the same ions. Three mechanisms were analysed via ribose ring-opening: dry, single molecule water- and metal-assisted, which confirmed the mechanochemical degradation of ribonucleosides, with nucleobase preservation. These results can be applied to interpret the organic content of terrestrial and extra-terrestrial samples after mechanochemical treatment.

Biological systems often need to operate in complex environments where conditions can rapidly change. This is possible due to their inherent ability to sense changes and adapt their behavior in response. Here, we detail recent advances in the creation of synthetic genetic parts and circuits whose behaviors can be dynamically tuned through a variety of intra- and extra-cellular signals. We show how this capability lays the foundation for implementing control engineering schemes in living cells and allows for the creation of biological systems that are able to self-adapt, ensuring their functionality is maintained in the face of varying environmental and physiological conditions. We end by discussing some of the broader implications of this technology for the safe deployment of synthetic biology.

The genus Clostridium is an important group of pathogenic and nonpathogenic Gram-positive anaerobic bacteria with sporulation capacity and wide distribution in different environments, including the gastrointestinal tract of healthy and diseased animals and humans. Among the pathogenic species of the genus, Clostridium chauvoei stands out as a histotoxic agent. It causes important myonecroses such as blackleg, a disease with high lethality and mortality, especially in young cattle, and is responsible for significant losses to livestock worldwide. The pathogenic-ity of the disease is complex and has not yet been fully elucidated. The hypotheses cover pro-cesses from the initial absorption to the transport and deposition of the agent in the affected tis-sues. The virulence factors of C. chauvoei were divided into somatic and flagellar antigens and soluble antigens/toxins, which are the main antigens involved in vaccines against blackleg in Brazil and worldwide. This review provides important information on the first and current ap-proaches to the agent C. chauvoei and its virulence factors, as well as provides a compilation of data on Brazilian studies related to blackleg.

Since 2015, outbreaks of foot-and-mouth disease (FMD) in the Middle East have been caused by a new emerging viral lineage, A/ASIA/G-VII. In-vitro vaccine matching data indicated that this virus poorly matched (low r1-value) with vaccines that were being used in the region as well as most other commercially available vaccines. The aim of this study was to assess the performance of two candidate vaccines against challenge with a representative field virus from the A/ASIA/G-VII lineage. The results from an initial full dose protection study provided encouraging data for the A/MAY/97 vaccine, while the A22/IRQ/64 vaccine only protected 2/7 vaccinated animals. In view of these promising results, this vaccine was tested in a potency test (PD50) experiment in which 5 cattle were vaccinated with a full dose, 5 cattle with a 1/3 dose and 5 cattle with a 1/9 dose of vaccine. Vaccines were prepared as would be done during an emergency vaccination campaign using a double oil emulsion adjuvant. At 21 days post vaccination these vaccinated cattle and 3 control cattle were subsequently challenged intradermolingually with a field isolate from the A/ASIA/G-VII lineage. All cattle from the full vaccine dose, 4 cattle from the 1/3 vaccine dose and 2 cattle from the 1/9 vaccine dose were clinically protected against challenge with FMDV A/ASIA/G-VII, resulting in a heterologous potency of 6.5 PD50/dose. These data support previous studies showing that a high potency emergency vaccine can protect against clinical disease when challenged with a heterologous strain of the same serotype. Not only the r1-value of the vaccine, but also the homologous potency of a vaccine should be taken into account when advising vaccines to control an outbreak.

Ionic liquids have been recognised as interesting solvents applicable in the efficient lignocellulosic biomass valorisation, especially in the biomass fractionation into individual polymeric components or direct hydrolysis some of biomass fractions. Considering the chemical character of ionic liquids, two different approaches, paved the way for a fractionation of biomass. The first strategy integrated a pre-treatment, hydrolysis and conversion of biomass through the employment of hydrogen-bond acidic 1-ethyl-3-methyimidazolim hydrogen sulfate ionic liquid. The second one relied on the use of a three-step fractionation process with hydrogen-bond basic 1-ethyl-3-methylimidazolium acetate to produce high purity cellulose, hemicellulose and lignin fractions. The proposed approaches were scrutinised for wheat straw and eucalyptus residues. Those different biomasses allowed understanding that enzymatic hydrolysis yields are dependent on the crystallinity of pre-treated biomass. The use of acetate based ionic liquid allowed to change crystalline cellulose I to cellulose II and consequently enhanced glucan to glucose yield to 93.14.1 mol% and 82.91.2 mol% for wheat straw and eucalyptus, respectively. Whereas for hydrogen sulfate ionic liquid, the same enzymatic hydrolysis yields were 61.6  0.2 mol% for wheat straw and only 7.90.3 mol% for eucalyptus residues. These results demonstrate the importance of either ionic liquid character or biomass type on the efficient biomass processing.

Freezing of Gait (FoG) is a disabling motor complication in Parkinson’s disease (PD), affecting approximately 50% of advanced PD patients. It is characterized by sudden and transient inability to initiate or maintain walking, leading to falls and reduced quality of life. This study investigates the relationship between white matter integrity and step initiation impairments in FoG. Forty-three PD patients (26 with FoG) underwent diffusion-weighted imaging to assess white matter DTI metrics and kinematic analysis during step initiation tasks. Multiple regression analyses were conducted to explore the connection between white matter tract integrity and step initiation behavior. The multiple regression analysis shows that (1) Right Inferior Longitudinal Fasciculus RD explained 31% of APA duration’s variance; (2) Corpus Callosum Forceps Major explained 25% of the step length's variance. There was a positive correlation between the Right Inferior Longitudinal Fasciculus RD and APA duration and a negative correlation between Corpus Callosum Forceps Major RD and step length. The findings suggest that compromised white matter integrity in RILF and CC contributes to impaired motor control during step initiation in FoG. These regions are critical for inhibitory control and interhemispheric coordination, crucial for APA execution and step length regulation.

Nanostructured dipeptide self-assemblies exhibiting quantum confinement are of great interest due to their potential applications in the field of materials science as optoelectronic materials for energy harvesting devices. Among those, aromatic cyclo-dipeptides containing the amino acid tryptophan are wide-band gap semiconductors displaying high mechanical rigidity, photoluminescence and piezoelectric properties to be used in power generation. In this work, we report the fabrication of hybrid systems based on chiral cyclo-dipeptide L-Tryptophan- L-Tryptophan incorporated into biopolymer electrospun fibers. The micro/nanofibers contain self-assembled nanospheres embedded into the polymer matrix are wide-band gap semiconductors (gap energy 3.8 eV), display blue photoluminescence and relevant piezoelectric and pyroelectric properties with coefficients as high as 57 pCN-1 and 35×10-6 Cm-2k-1, respectively. They are therefore promise systems for thermal sensing and energy harvesting applications.

Hybrid biomaterials were engineered using the electrospinning technique, incorporating the dipeptide Boc-L-phenylalanyl-L-Isoleucine into microfibers composed of biocompatible polymers. The examination by scanning electron microscopy affirmed the morphology of the microfibers, exhibiting diameters ranging between 0.9 to 1.8 µm. The dipeptide self-assemblies into spheres with a hydrodynamic size between 0.18 to 1.26 µm. The dielectric properties of these microfibers were characterized through impedance spectroscopy, where variations in both temperature and frequency were systematically studied. The investigation revealed a noteworthy rise in the dielectric constant and AC electric conductivity with increasing temperature, attributable to augmented charge mobility within the material. The successful integration of the dipeptide was substantiated through the observation of Maxwell-Wagner interfacial polarization, affirming the uniform dispersion within the microfibers. In-depth insights into electric permittivity and activation energies were garnered using the Havriliak-Negami model and the AC conductivity behavior. Very importantly, these engineered fibers exhibited pronounced pyroelectric and piezoelectric responses, with Boc-Phe-Ile@PLLA microfibers standing out with the highest piezoelectric coefficient, calculated to be 56 pC/N. These discoveries help us understand how dipeptide nanostructures embedded into electrospun nano/microfibers can greatly affect their pyroelectric and piezoelectric properties. They also point out that polymer fibers could be used as highly efficient piezoelectric energy harvesters, with promising applications in portable and wearable devices.

Rhizosphere bacteria have a decisive influence on plant ionic adjustment, as well as in ameliorating plant growth under an array of stress situations. Plant growth-promoting rhizobacteria (PGPR) colonize the rhizosphere of plants and promote plant growth through mechanisms such as solubilization of mineral phosphates, biological N2 fixation, production of siderophores and phytohormones, and can induce systemic resistance in the plant. This can be of extreme importance when considering the restoration of salinized grounds by halophytic species. This present work aims to evaluate the physiological fitness and phytoprotection improvement by salt marsh PGPR in Halimione portulacoides under mild and severe salt stress. Plants inoculated with PGPR-consortium showed higher photochemical performances, improved antioxidant response, and promotion of osmotic balance traits, that boosted the individual’s ability to cope with mild salt stress. All these changes are also in line with the differential elemental profiles (Na, K, and Ca) observed in the different plant tissues. Even under severe salt stress, some physiological traits were improved when compared to the non-inoculated individuals. The results developed under this work, point out an important role of bioaugmentation in promoting plant fitness and improving salt tolerance, with a great potential for applications in seawater agriculture, restoration, and bio-reclamation of salinized soils.

The contamination of areas around solid urban waste dumps is a global challenge for the maintenance of environmental quality in large urban centres in developing countries. This study applied geophysical methods (electrical resistivity) to identify leachate contamina-tion plumes in the subsoil and groundwater, as well as to describe their temporal (2020 and 2021) dynamics in the lithology and groundwater around the Hulene - B waste dump, Maputo, Mozambique. Geophysical methods (electrical resistivity) were applied to identify possible groundwater contamination plumes, their dynamics, mechanisms of their enrichment and dispersion. Eight 400 m electrical resistivity profiles were performed, four profiles in January 2020 and four profiles in May 2021, overlapped, and the data were inverted with RES2D software. The electrical resistivity models indicate an E - W move-ment of large contamination plumes that dilute superficially into the natural surface wa-ter receiving basin and groundwater, creating zones of resistive anomalies. The thickness of the plumes in the subsurface environment was shown to be extensive in summer for profiles 1a and 2b and we associate it with the higher leachate production and migration mechanisms, which are intense in the hot and rainy season. Profile 4b showed the prop-agation of anomalous surface and subsurface areas, which was associated with higher leachate production and migration process in the new deposition zone (west). The spatial distribution of contamination plumes at both stations reduced significantly as we moved further away from the waste deposit, revealing the attenuating effect of groundwater and lithological substrate (Profile 3 a, b, and fig.7).

In this article we derive a closed form expression for the symmetric logarithmic derivative of Fermionic Gaussian states. This provides a direct way of computing the quantum Fisher Information for Fermionic Gaussian states. Applications range from quantum Metrology with thermal states to non-equilibrium steady states with Fermionic many-body systems.

This paper presents the simplified and quick way to obtain an experimental measure of the modulus of elasticity(E) of a piece of metal rod using the Smartphone microphone and through the experimental configuration in mode of unsupport beam Euler-Bernoulli(E-B). To understand it, it is required to have knowledge about flexural vibration of E-B beams and to know the analysis of the spectogram of the audio signal. The methodology consists in measuring the flexural resonance frequency through an app installed on a Smartphone and using the E formula deduced from the E-B theoretical framework. The results of the experimental measurements have a discrepancy of less than 5% with respect to the factory value, for a carbon steel rod with circular cross section using the impact excitation technique. It describes the precision and accuracy of the experimental measurement. It is useful, because it helps to classify the materials in the Faculty of Engineering and it helps to make a more efficient quality control.

Objectives: In this retrospective observational study, it is intended to establish how the implementation of the use of antimicrobial optimization programs at the hospital and ICU level in a Sincelejo Sucre Clinic has significantly impacted the improvement of the rational use of antibiotics1, due to the alarming situation of increasing antibiotic resistance. Materials and methods: The methodology used was to analyze the Excel database of the Clinic, in such a way that it would allow comparing the pre-PROA and post-PROA data of 4 antibiotics, ceftriaxone3, ciprofloxacin4, meropenem5 and vancomycin6, measured in Daily Dose. defined. Results: According to the DDD values obtained for the 4 antibiotics, a reduction in DDD was identified in the post-Proa period. On the other hand, considering the DDD reported by the WHO for each of the antibiotics, significant differences were verified compared to the DDD obtained in the clinic in the hospitalization and ICU services. Conclusions: In conclusion, in the clinic there was evidence of a reduction in DDD in the post-ASP2 period compared to the pre-PROA period, both in hospitalization and in the ICU, as well as a slight to large effect with Cohen's D.

Introduction: Within primary ARDS, SARS-CoV-2-associated ARDS (C-ARDS) emerged in late 2019, reaching its peak during the subsequent two years. Recent efforts in ARDS research have concentrated on phenotyping this heterogeneous syndrome to enhance comprehension of its pathophysiology. Methods and Results: A retrospective study was conducted on C-ARDS patients from April 2020 to February 2021, encompassing 110 participants with a mean age of 63.2±11.92 (26-83 years). Of these, 61.2% (68) were male, and 25% (17) experienced severe ARDS, resulting in a mortality rate of 47.3% (52). Ventilation settings, arterial blood gases, and chest X-ray (CXR) were evaluated on the first day of invasive mechanical ventilation and between days two and three. CXR images were scrutinized using a convolutional neural network (CNN). A binary logistic regression model for predicting C-ARDS mortality was developed based on the most influential variables: age, PaO2/FiO2 ratio (P/F) on days one and three, CNN-extracted CXR features, and age. Initial performance assessment on test data (23 patients out of the 110) revealed an area under the receiver operating characteristic (ROC) curve of 0.862 CI (0.654-0.969). Conclusion: Integrating data available in all intensive care units enables the prediction of C-ARDS mortality by utilizing evolving P/F ratios and CXR. This approach can assist in tailoring treatment plans and initiating early discussions to escalate care and extracorporeal life support. Machine learning algorithms for imaging classification can uncover otherwise inaccessible patterns, potentially evolving into another form of ARDS phenotyping. The combined features of these algorithms and clinical variables demonstrate superior performance compared to either element alone.

Linking climate action with sustainable development goals (SDGs) might incentivize social and political support to forest conservation. However, further examination of the conceptual entry points for linking efforts for reducing forest-based emissions with those for delivering SDGs is required. This review paper aims to contribute to fulfilling this research need. It provides insights into the links between conserving forests for climate change mitigation and peacebuilding. Specifically, the paper examines opportunities to harness climate finance for conserving forests and achieving long-lasting peace. It does so via a literature review and the examination of the Orinoquia region of Colombia. Findings from the literature review suggest that harnessing climate finance for conserving forests and peacebuilding is, in theory, viable if activities are designed in accordance with social, institutional, and economic factors. Meanwhile, the Orinoquia region provides evidence that these two seemingly intractable problems are proposed to be solved together. At a time when efforts for reducing forest-based emissions are being designed and targeted at (post-) conflict areas in Colombia and elsewhere, the paper’s findings might demonstrate to government agencies — both environmental and non-environmental — the compatibility of programs aimed at reducing forest-based emissions with efforts relating to peacebuilding and sustainable food.

Corporate Sustainability (CS) literature has gone through a period of intense development. The moment is favorable to gathering these contributions to consistently advance the state of the art in CS and, also, discuss them to apply in real contexts. The main objective of the paper is to systematize, through a systematic literature review using content analysis of the 30 most cited articles from 2007 to 2017, the guiding pillars of CS management. The systematic search for papers was carried out in Scopus and Web of Science and the initial screening of the papers was assisted by the coding software MAXQDA 2018, through which the authors structured and analyzed their main insights, contributions and conclusions. After getting acquainted with the sample, an in-depth reading of the texts was conducted and 60 CS elements were identified. The elements cited in the relevant literature were grouped into 6 pillars related to Corporate sustainability strategy; Corporate governance; Human resources management; Knowledge and innovation management; Measurement, disclosure and independent assurance; and Management systems and Integrated management systems. The discussion of CS management pillars presented in this study provides understanding to researchers and managers on the main aspects that make up the integration of this construct in the companies, especially from a management point of view.

Alcohol effects on hepatic lipid metabolism through various mechanisms, leading synergistically to an accumulation of fatty acids (FA) and triglycerides. Obesity, as well as, the dietary fat [saturated fatty acids (FA) versus poly-unsaturated fatty acids (PUFA)] may modulate the hepatic fat. Alcohol inhibits adenosine monophosphate activated kinase (AMPK). AMPK activates peroxisome proliferators activated receptor a (PPARα) and leads to a decreased activation of sterol regulatory element binding protein 1c (SRABP1c). The inhibition of AMPK, and thus of PPARα results in an inhibition of FAs oxidation. This ß-oxidation is further reduced due to mitochondrial damage induced through cytochrome P4502E1 (CYP2E1) driven oxidative stress. Furthermore, the synthesis of FAs is stimulated through an activation of SHREP1. In addition, alcohol consumption leads to a reduced production of adiponectin in adipocytes due to oxidative stress and to an increased mobilization of FAs from adipose tissue and from the gut as chylomicrons. On the other side, the secretion of FAs via very low density lipoproteins (VLDL) from the liver is inhibited by alcohol. Alcohol also affects signal pathways such as early growth response 1 (Egr-1) associated with the expression of tumour necrosis factor  (TNF), and the mammalian target of rapamycin (mTOR) a key regulator of autophagy. Both have influence the pathogenesis of alcoholic fatty liver. Alcohol-induced gut dysbiosis is contributing to the severity of ALD by increasing metabolism of ethanol in the gut and promoting intestinal dysfunction. Moreover, pathogen associated molecular paterns (PAMPS) via specific Toll-like receptors (TLR) bacterial overgrowth is leading to the translocation of bacteria. Endotoxins, and toxic ethanol metabolites enter the enterohepatic circulation reaching the liver, inducing the activation of the nuclear factor kappa-B (NFB) pathway. Pro-inflammatory cytokines released in the process contribute to inflammation and fibrosis. In addition, cellular apoptosis is inhibited in the favor of necrosis.

The worldwide number of migrants has had a rapid increase during the last fifteen years. Despite the extensive research studies that elucidate the increase in migrants' recipient countries, we know little about the relationship between the climate factors and human mobility in the countries of origin. Hence, this study focuses on the effects of weather and the propensity of individuals to leave a territory by measuring the importance of rain precipitation or the lack of it in one of the critical food corridors of Central America, formed by El Salvador, Honduras, and Guatemala. To study the mobility process, we develop a stochastic frontier model; the main result shows a greater propensity to migrate when there is a significant drought event in the place of origin. Some other factors that motivate people to leave their homeland are the effect of other climate events measured through the control system (ENSO), homicide levels, economic performance, and exchange rate. The findings allow differentiating between drought and excess precipitation on a population and mobility to other territories. In addition, these results permit us to derive observable implications of the different effects of flooding and drought and create public policies of prevention, mitigation, and resilience.

Cancer survival continues to improve in high-income countries, partly explained by advances in screening and treatment. Previous studies have mainly examined the relationship between individual dietary components and cancer prognosis in tumours with good therapeutic response (breast, colon and prostate cancers). The aim of this review was to assess qualitatively (and quantitatively where appropriate) the associations of dietary patterns and cancer prognosis from published prospective cohort studies, as well as the effect of diet interventions by means of randomized controlled trials (RCT). A systematic search was conducted in PubMed, and a total of 35 prospective cohort studies and 14 RCT published between 2011 and 2021 were selected. Better overall diet quality was associated with improved survival among breast and colorectal cancer survivors; adherence to the Mediterranean diet was associated to lower risk of mortality in colorectal and prostate cancer survivors. A meta-analysis using a random-effects model showed that higher versus lower diet quality was associated with a 23% reduction in overall mortality in breast cancer survivors. There was evidence that dietary interventions, generally combined with physical activity, improved overall quality of life, though most studies were in breast cancer survivors. Further cohort and intervention studies in other cancers are needed to make more specific recommendations.

This study presents a novel kinematic tracking model, designed for a networked exoskeleton system that is asynchronously taught by a remote therapist. On the server side, the therapist’s rehabilitation exercises are quantitatively assessed using a monocular passive vision system. The resultant analytical metrics are then transmitted asynchronously over the network to patients equipped with exoskeletons. On the client side, the exoskeleton utilizes these analytical metrics as reference paths for exercises, complemented by electromyography (EMG) feedback. This work introduces a calibration approach aimed at estimating angular positions by utilizing EMG observations. The calibration model establishes real-time correlations between polynomial reference positions. This calibration mechanism is integrated into simulations of both upper and lower limb exoskeletons. We further explore redundant kinematics, incorporating an EMG observer for linear, time-variant rehabilitation tracking control. Our methodology is validated using vision-based metric data and experimental EMG measurements for various exercises, including shoulder flexion, elbow flexion, and rowing-like movements. This work also includes computer simulations for tracking the control of rehabilitation exercises, demonstrating the adaptability of the system in reliably, robustly, and effectively following desired trajectories.

In this study, ignition delay and burning rate are experimentally investigated in relation to the effect of pristine carbon nanotubes (CNTs), sodium dodecylbenzene sulfonate (SDBS), and diesel blends. Single droplet combustion tests were conducted in a combustion system for 21 days using CNTs at concentrations of 50 ppm and 100 ppm, that were dispersed in Colombian commercial diesel and stabilized by SDBS. Additionally, recordings of the combustion were collected, and the Shadowgraph optical method was utilized for monitoring the evolution of droplet size during combustion. The measurements were done over a four-week period. The results demonstrated that the temporal stability has a direct impact on the single droplet combustion tests because a concentration of CNTs of 100 ppm showed higher stability than those achieved by 50 ppm. Consequently, improvements were found with a concentration of 100 ppm, for instance, thermal conductivity increased by about 20%, ignition delay time by 16.2%, and burning rate by 30.5%.

Multicore magnetic nanoparticles of manganese ferrite were prepared using carboxymethyl-dextran and melamine as agglutinating agents. The nanoparticles prepared using melamine exhibit a flower-shape structure, a saturation magnetization of 6.16 emu/g and good capabilities for magnetic hyperthermia. Magnetoliposome-like structures containing the multicore nanoparticles exhibit sizes in the range 250 – 400 nm. A new antitumor thienopyridine derivative was loaded in these nanocarriers with a high encapsulation efficiency of 98% ± 2.6%. Release profiles in absence and presence of an AMF indicate a transport by diffusion, with a maximum compound release of 31% under the AMF. A sustained and controlled drug release in anticipated from the results, pointing to suitable characteristics of the magnetoliposomes for dual cancer therapy (combined magnetic hyperthermia and chemotherapy).

In this paper, we address the following research question: Is feasibility to use an artificial intelligence system to predict the risk of student failure in a course based solely on their performance in prerequisite courses? Adopting a machine learning-based quantitative approach, we implement Course Prophet, the prototype of a predictive system that maps the input variables representing student performance to the target variable, i.e., the risk of course failure. We evaluate multiple machine learning methods and find that the Gaussian process with Matern kernel outperforms other methods, achieving the highest accuracy and a favorable trade-off between precision and recall. We conduct this research in the context of the students pursuing a Bachelor’s degree in Systems Engineering at the University of Córdoba, Colombia. In this context, we focus on predicting the risk of failing the Numerical Methods course. In conclusion, the main contribution of this research is the development of Course Prophet, providing an efficient and accurate tool for predicting student failure in the Numerical Methods course based on their academic history in prerequisite courses.

The COVID-19 pandemic crisis has brought about unprecedented economic and social consequences worldwide. The implementation of isolation measures, including national and international travel restrictions, significantly affected contact-intensive sectors such as tourism. During this lockdown period, Information and Communication Technology (ICT) was crucial in maintaining connectivity and enabling remote activities. Governments across the world implemented discretionary measures to mitigate the crisis's adverse effects on economic activity. This paper aims to analyze whether the level of ICT adoption and the importance of tourism influence the fiscal policy efforts pursued by governments. Based on the results of a linear regression analysis for 154 countries, the findings suggest that in countries with higher international tourism receipts, the governments had to promote higher fiscal stimulus. At the same time, ICT development diminished the efforts of the fiscal policy response to the crisis since it facilitated economic resilience. The findings of this study can contribute to understanding how governments responded to the pandemic crisis and the factors that influenced their fiscal policy decisions.

Thermal variations affect tri-trophic interactions involving plants, herbivores, and parasitoids, causing a mismatch between their phenological cycles. In the current environmental context of climate change, climatic factors can undergo profound and sudden changes, such as sudden hot or cold snaps. Here we show that episodes of short but sustained low temperatures have increased, mainly in the month of May, in the last two decades. We subjected galls induced by Asian chestnut gall wasp (ACGW) Dryocosmus kuriphilus to cold stress to assess if and how the pest and its parasitoids were affected. Over the course of two years seasonal parasitism, parasitism rates, the relative abundance of each parasitoid species, and mortality of ACGW were calculated. We found that the cold treatment affected both pest and parasitoids, resulting in a reduction in emerging ACGWs and differing ratios of species within the parasitoid community. The striking example was the change in the relative frequency of three species of Eupelmus spp. and of Mesopolobus tibialis, which doubled in thermally-stressed galls in all chestnut fields. The thermal effects on the development of the host and the direct effects of cold temperatures on the surface of galls (i.e., humidity or hardness of the galls) warrant further research in this direction.

The Wnt pathway plays an essential role in the initiation and progression of various types of cancer. ROR1 and ROR2 are Wnt receptors that are critical for β-catenin-independent (non-canonical) pathways and have been linked to processes driving tumor development and progression, such as cell proliferation, survival, invasion, and therapy resistance. Both receptors have garnered interest as potential therapeutic targets since they are largely absent in adult tissue, are overexpressed in several cancers, and, as members of the receptor tyrosine kinase family, are easier to target than all other components of the pathway. Unlike ROR1 which always promotes tumorigenesis, ROR2 has a very complex role in cancer acting either to promote or inhibit tumor progression in different tumor types. In the present article, we summarize the findings on ROR2 expression in cancer patients and its impact on clinical outcome. Further, we review the biological processes and signaling pathways regulated by ROR2 that explain its dual role in cancer. Finally, we describe the ongoing strategies to target ROR2 in cancer.

The COVID-19 pandemic has obliged Governments all around the world to take confinement and social 13 distancing measures. The reduction of leisure and production activities on beaches and ports have 14 disappeared direct and indirect contamination such as plastics, hydrocarbon spill, microbiological loads, 15 noise level, etc. leading to temporary improved environmental conditions, converting the beaches 16 similar to Marine Protected Areas. Some conditions are briefly analyzed through local surveys and in situ 17 observations in the popular beaches and ports of Salinas, Manta and Galápagos. 97-99 % of surveyed 18 people agreed that beaches have notoriously improved during confinement at least from visual 19 observation. On a scale from 1 (worst) to 5 (best), the beaches were rated 2.23 and 2.83 (less than 20 acceptable) before quarantine, and 4.48 and 4.33 after it for Salinas and Manta respectively. The 21 beaches have less garbage in general and plastic, even though there has been an increase in plastic and 22 face mask production around the world. In Salinas, 72%, and 23 % of surveyed people have seen small 23 pelagic fish, whilst in Manta 75%, and 41% of people saw the same, but also 17% of people have seen 24 whales (humpback and shark-whales) and dolphins practically swimming on the beach. Manta rays, 25 turtles, and other types of species were also observed. In Galapagos beaches, turtles have been 26 observed many more times than usual. The main plausible reason is the decrease in noise level. It is 27 recommended to take this unique opportunity, to construct a baseline data and information on physical, 28 chemical, biological, microbiological coastal oceanographic science, and from them to establish a proper 29 Coastal Zone Management based on beach description, water, and beach quality, human dimension, 30 and economic value indexes. This data and information construction should ideally be done before the 31 beaches are open.

Latin America and the Caribbean offer the most favorable natural and social conditions for the emergence of cattle ranching that regenerate and maintains the ecosystem services on which life on Earth depends, that is energy efficient and that contributes to meeting fundamental human food needs. Unlike other major global producers, cattle farming in Latin America and the Caribbean is fundamentally based on pasture. Therein lies both its strength (due to the regenerative potential of well-managed pastures) and its vulnerability (due to the pervasive link between deforestation and pasture formation, especially in the Amazon, where 40% of the Brazilian herd is concentrated). The diversification of pastures (today marked by impressive monotony, with brachiaria accounting for 85% of the species in Brazil), the introduction of legumes and tree plantations within them, and the proper management of herds, open the way to the possibility of drastically reducing the area currently occupied by the activity (especially in the Amazon) while maintaining the supply of its products. Agricultural research has disseminated forms of moderate intensification of cattle ranching, which represent a low opportunity cost of animal feed and, at the same time, regeneration of ecosystem services that have so far been destroyed by the prevailing methods of farming.

Injection molding is one of the most common and effective manufacturing processes used to produce plastic products and impacts industries around the world. However, injection molding is a complex process that requires careful consideration of several key control variables. These variables and how they are utilized greatly affect the resulting parts of any molding operation. The bounds of the acceptable values of each control process variable or CPV must be analyzed and delimited to ensure manufacturing success and produce injected molded parts efficiently and effectively. One such method in which the key CPV of an injection molding operation can be delimited is through the development of a process window. Once developed, operating CPV at values inside the boundaries of the window or region will allow for the consistent production of parts that comply with the desired performance measures (PM), promoting a stable manufacturing process. This work proposes a method to experimentally develop process windows and illustrates the methodology with a specific molding operation.

Urban planning is recognized as an interaction between the state and society, which aims to articulate public policies in the territory, facilitating their administration in favor of greater development and well-being of society. However, this interaction becomes complex because consumption demands increase, and the needs of the community exceed the capacity of the urban ecosystem to supply them, hindering its sustainable functionality. With this panorama, it becomes relevant to study urban planning from a sustainable environmental planning perspective, based on four topics: urban planning, sustainability, resilience and smart cities. The methodology used is based on a bibliometric study through a PRISMA adjustment to 87 articles, supported by VOSviewer® to construct and visualize the co-occurrence networks of important terms extracted from a body of scientific literature. The main result is to consider cities with a complex systems approach that works like a gear, that is, there is a connective element between inter- and intra-urban processes. This relationship is the key factor that allows understanding their synchronization, stating that the deepening of each of these topics is crucial to the ideal of a territorial administration through time scales, by means of adaptive cycles, allowing to provide new tools to concepts such as carrying capacity and the measurement of the environmental footprint.

The International System of Units (SI) was adopted in 1960 as a universal measuring system to be used for all areas of science. Sports Science papers have shown lots of inaccurate and inappropriate terms for quantification of athletes’ performance and the psychobiological responses to exercise (e.g., internal load). In biomechanics, external and internal loads are forces acting externally and internally, inducing stress and strain in the biological tissues. Therefore, the current review present simple proposals to correct the inappropriate terms: 1) do not use the term external load when referring to the assessment of exercise time, distance, displacement, speed, velocity, acceleration, torque, work, power, impulse, etc.; 2) do not use the term internal load when referring to the assessment of psychobiological stress markers (i.e., session rating of perceived exertion, heart rate, blood lactate, oxygen consumption, etc.); 3) do not use the term impulse when expressing other calculus than integrating force with respect to time, and neither strain, when expressing other phenomena than the body deformation. Instead, the term exercise intensity is universal and can be used to describe all forms of exercise. Finally, duration should precisely be described according to physical quantities (e.g., time, distance, displacement, speed, velocity, acceleration, force, torque, work, power, impulse, etc.) and the units accomplish by use of the SI. These simple quantifications can be performed for the exercises, sessions, microcycles, mesocycles and macrocycles of the athletes. Such standardization will provide a consistent and clear communication among sports scientists and all areas of science.

Wild rocket plants were cultivated in a plastic greenhouse into two independent sectors, one for soil-bound (SbS) cultivation and another equipped for soilless (ScS) cultivation systems. In both SbS and ScS, the crop was subjected to treatments consisting in a high-compared to a low-input fertilization program (HF and LF treatment, respectively). Water use efficiency (WUE) and partial factor productivity (PFP) for nutrients (N, P, K, Ca and Mg for ScS, and N for SbS) were measured. Rocket leaves, separated for cultivation system and fertilization program, collected at different cuts during the growing cycle, were cold stored at 10 °C until 16 d. At each sampling day (at harvest and during the storage), sensory parameters, respiration rate, dry matter, colour, electrolyte leakage, antioxidant activity, total phenols, total chlorophyll and ammonia content were evaluated. In ScS, the PFP for all nutrients supplied as fertilizers showed a significant increase with the LF treatment, with values higher than 30 % for N, K and Ca. As for the postharvest performance, rocket leaves cultivated in ScS showed better qualitative traits than those cultivated in SbS, as suggested by the lower values of ammonia content and electrolyte leakage recorded at the end of storage in samples grown in ScS. Moreover, in ScS, data showed a lower membrane damage in LF than HF rocket leaves. Finally, regarding total chlorophyll content, even if no effect of treatments was recorded in SbS, rocket cultivated in ScS, showed a better retention of this parameter applying LF than HF treatment. In addition to this, a PLS model (R2 = 0.7) able to predict the cultivation system, using as variables total chlorophyll content no-destructively measured, was implemented.

Heat pumps are increasingly becoming a key solution in the quest for decarbonization, offering a significant advantage over traditional boilers due to their superior energy efficiency. Not only can heat pumps provide both heating and cooling, but they also achieve thermal efficiencies exceeding 500%, which can seem to defy conventional expectations. The outdoor unit of a heat pump consists of about twenty main components, one of which is a complex network of copper pipes and sheets welded to valves, connectors, and other fittings. This set involves over thirty welded joints, highlighting a significant opportunity for reducing manufacturing time through process optimization. Copper is a critical material extensively used in various applications due to its excellent thermal and electrical conductivity. However, these very properties make welding copper particularly challenging, especially when aiming to automate and streamline industrial processes. Traditionally, connecting copper pipes and fittings is done through brazing, yet, alternative methods such as LASER welding, electron beam welding, resistance welding, friction welding, and ultrasonic welding also exist. This study focuses on the ultrasonic welding of copper, aiming to identify the optimal parameters that maximize the mechanical strength of overlapping joints and ensure effective tube sealing. Experimental results showed that for copper sheets, the best outcomes were achieved with a welding time of 3 s and a pressure of 6 bar. For tube sealing, the optimal conditions were a welding time of 3 s and a pressure of 4 bar. For both scenarios, the same variables were used, retention time of 0.62 s, initial pressure of 2 bar, retention pressure of 2 bar and sonotrode rising pressure of 3 bar. The analysis reveals that ultrasonic welding of copper can achieve both robust mechanical strength and reliable sealing, making it a promising technique for industrial applications.

Evaluating the economic impact of airports is crucial for understanding the benefits they bring to a region. However, when an area has more than one airport, it becomes essential to analyze each airport's contribution to the local economy to make informed investment and policy decisions. Thus, studying economic models that can distinguish each airport's impact on the region's economy becomes essential. In this context, this paper aims to compare three different approaches to determine the economic contribution of airports in a given region and identify their social and economic benefits. The International Civil Aviation Organization recommends using Input-Output analysis in this context. The study considered three weight factors for the Input-Output basic model: circular buffer, displacement time, and Huff's gravitational model. The analysis was performed using the three largest airports in São Paulo's state, Brazil, due to their proximity and influence on the surrounding area. The models were compared based on their efficiency and accuracy in reflecting the reality of the case study context. The study identified the most suitable model for establishing correlations between investments made in airport infrastructure and the generation of gross domestic product, employment, and added value. This study fills a gap in the existing literature by proposing improvements to the methods for evaluating airports' economic and social benefits. In recent times, airport investors, both in the government and private sectors, have become increasingly demanding in their need for accurate analyses before making investments. Therefore, the results of this paper will provide valuable insights into the benefits of investing in airport infrastructure and help policymakers and investors make informed decisions.

Polarons, quasiparticles resulting from the interaction between an impurity and the collective excitations of a medium, play a fundamental role in physics, mainly because they represent an essential building block for understanding more complex many-body phenomena. In this manuscript, we study the spectral properties of a single impurity mixed with identical bosons in a one-dimensional lattice with power-law hopping. In particular, based on the so-called T-matrix approximation, we show the existence of well-defined quasiparticle branches for several tunneling ranges and for both, repulsive and attractive impurity-boson interactions. Furthermore, we demonstrate the persistence of the attractive polaron branch when the impurity-boson bound state is absorbed into the two-body continuum and that the attractive polaron becomes more robust as the range of the hopping increases. The results discussed here are of relevance for the understanding of the equilibrium properties of quantum systems with power-law interactions.

Purpose: The goal of this article was to introduce a new technique for root coverage (RC), the Mixed-Thickness Tunnel access (MiTT), approaching a full-split design, showing the results obtained in a case series and demonstrating it step-by-step. Methods: Healthy individuals, non-smokers, and non-diabetics, who were diagnosed with gingival recession (GR) type 1 or 2 (RT1 or RT2). After all necessary evaluations, prophylaxis was performed 14 days before the surgical procedure. Then, after the basics clinical conduct and anesthesia, one or two vertical incision(s) on the mucosa (around 1-2 mm apical to the MGJ), lateral to the papilla base, were done. Initial detachment of the mucosa from the muscles (split design); it was permitted (but not mandatory) to do intrasulcular incisions; from the MGJ to coronal, subperiosteal access was done to raise the full-thickness tunnel. It must communicate up to the gingival sulcus area and the papilla’s base, keeping the papilla’s tip intact. A connective tissue graft was harvested, which was inserted through the linear incision or intrasulcularly. Interrupted sutures were done and may be used as adjunctive material. Results: Nine healthy individuals (7 females and 2 males) aged 19 and 43 years were enrolled. They were treated following the MiTT steps. There were four cases with a single GR, 2 patients with 2 teeth involved, and three with 3 or 4 GR. Seven cases were RT1 and two RT2. All RT1 cases achieved 100% RC, while the mean RC obtained for RT2 was around 80%. Conclusion: MiTT can be considered a more straightforward approach for minimally invasive surgical technique, which is a feasible option to treat RC with a high success rate, predictability, and esthetic preservation. There is a technical sensitivity to performing the full-split design procedure.

COVID-19 is a pandemic triggered by the coronavirus SARS-CoV-2 whose peak occurred in the years 2020 and 2021. The main target of the virus is the lung and infection is associated to an accentuated inflammatory process involving mainly the innate arm of the immune system. Here, we described the induction of a pulmonary inflammatory process triggered by the intranasal (IN) instillation of UV-inactivated SARS-CoV-2 in C57BL/6 mice and then the evaluation of vitamin D (VitD) ability to control this process. The assays used to estimate the severity of lung involvement included total and differential number of cells in the BALF, histopathological analysis, quantification of T cell subsets and inflammatory mediators by RT-PCR, cytokine quantification in lung homogenates and flow cytometric analysis of cells recovered from lung parenchyma. IN instillation of inactivated SARS-CoV-2 triggered a pulmonary inflammatory process, consisting of various cell types and mediators, resembling the typical inflammation found in COVID-19 patients. This inflammatory process was significantly decreased by IN delivery of vitD, but not by its IP administration, suggesting that this hormone has therapeutic potential in COVID-19 if locally applied.

Coronavirus disease 2019 (COVID-19) is a potentially serious acute respiratory infection caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). Since the World Health Organization (WHO) declared COVID-19 a global pandemic, the virus has spread to more than 200 countries with more than 500 million cases and more than 6 million deaths reported globally. It has long been known that viral respiratory tract infections predispose patients to bacterial infections and that these co-infections often have an unfavourable clinical outcome. Moreover, nosocomial infections, also known as health care-associated infections (HAIs), are those infections that are absent at the time of admission and acquired after hospitalization. However, the impact of coinfections or secondary infections on the progression of COVID-19 disease and its lethal outcome is still debated. The aim of this review was to assess the literature on the incidence of bacterial co-infections and superinfections in patients with COVID-19. The review also highlights the importance of the rational use of antibiotics in patients with COVID-19 and the need to implement antimicrobial stewardship principles to prevent the transmission of drug-resistant organisms in healthcare settings. Finally, alternative antimicrobial agents to counter the emergence of multidrug-resistant bacteria causing healthcare-associated infections in COVID-19 patients will also be discussed.

Drying food involves complex physical atmospheric mechanisms with non-linear relations from the air-food interactions and those relations are strongly dependent on the moisture contents and the type of food. Such dependence makes it complex to design suitable dryers dedicated to a single drying process. To streamline the design of a novel compact food-drying machine, a heat pump dryer component design optimization algorithm was developed as a subprogram of a Computer Aided Engineering tool. The algorithm requires inputting food and air properties, the volume of the drying container and the technical specifications of the heat-pump off-the shelf components. The heat required to dehumidify the food supplied by the heat exchange process from condenser to evaporator, and the compressor’s requirements (refrigerant mass flow rate and operating pressures) are then calculated. Compressors can then be selected based in the volume and type of food to be dried. The algorithm is shown via a flow chart to guide the user through 3 different stages: Changes in drying air properties, Heat flow within dryer and Product moisture content. Example results of how different compressors are selected for different type of produces and quantities (Agaricus Blazei mushroom with 3 different moisture contents or fish from Thunnini tribe) conclude this article.

Mutation in the ethionamide (ETH) activating enzyme, EthA, is the main factor determining resistance to this drug, used to treat TB patients infected with MDR and XDR Mycobacterium tuberculosis isolates. Many mutations in EthA of ETH resistant (ETH-R) isolates have been described but their roles in resistance remain uncharacterized, partly because structural studies on the enzyme are lacking. Thus, we took a two-tier approach to evaluate two mutations (Y50C and T453I) found in ETH-R clinical isolates. First, we used a combination of comparative modeling, molecular docking, and molecular dynamics to build an EthA model in complex with ETH that has hallmark features of structurally characterized homologs. Second, we used free energy computational calculations for the reliable prediction of relative free energies between the wild type and mutant enzymes. The ΔΔG values for Y50C and T453I mutant enzymes in complex with FADH₂-NADP-ETH were 3.34 (+/−0.55) and 8.11 (+/−0.51) kcal/mol, respectively, compared to the wild type complex. The positive ΔΔG values indicate that the wild type complex is more stable than the mutants, with the T453I complex being the least stable. These are the first results shedding light on the molecular basis of ETH resistance, namely reduced complex stability of mutant EthA.

Salting influences microbial growth, enzymatic activity and biochemical reactions during ripening, thus contributing to the final quality of cheese. The aim of this study was to evaluate the influence of different salting methods (dry salting at 12, 24 and 48 h; in brine; and curd salting) on the chemical (moisture and salt content), physico-chemical (pH, titratable acidity and water activity) and sensory (texture profile analysis, colour and sensory attributes) characteristics of an industrial blue vein cheese. Dry salted cheeses had lower moisture content and water activity, and higher salt/moisture content and acidity than those salted in brine and curd. Dry-salted cheeses were also characterised by higher values for hardness, fracturability and instrumental gumminess. Dry-salted cheeses showed differences only in the red/green colour component (a*), with the curd-salted cheeses being less greenish. All cheeses scored high (around 7) in the tasters' overall impression, with the dry-salted cheeses at 12 and 24 h showing optimal growth and even distribution of mould, as well as better flavour and texture.

With the increment of the aging population in recent years, neurodegenerative diseases exert a major global disease burden, essentially as a result of the lack of treatments that can stop the disease progression. Alzheimer’s Disease (AD) is an example of a neurodegenerative disease, that affects millions of people globally, with no effective treatment. Natural compounds have emerged as a viable therapy to fill a huge gap in AD management, and in recent years, mostly fuelled by the Covid-19 pandemic, RNA-based therapeutics have become a hot topic in the treatment of several diseases. Treatments of neurodegenerative diseases face significant limitations due to the complex and interconnected pathways that lead to their hallmarks and, also due to the necessity to cross the blood–brain barrier. Nanotechnology has contributed to surpass this bottleneck in the treatment of AD, by promoting safe and enhanced drug delivery to the brain. In particular, exosome-like nanoparticles, a hybrid delivery system combining exosomes and liposomes' advantageous features, are demonstrating great potential in the treatment of central nervous system diseases.

Lake Chapala is a natural ecosystem of Mexico, declared Ramsar site, currently, is an area with importance in the agricultural sector, tourism, and important source of drinking water in the Metropolitan area of Guadalajara, considered as a thermo regulatory body. This study used tools such as Rhtest, as well as analyzing extreme climate indices using RClimdex. In addition, the relationship with the change in water surface of Lake Chapala was assessed through the NDWI index, using Landsat images, between 1985 and 2018. According to the obtained results, the signs of climatic variability are detected in the study region, which, directly affects the basin runoff and water levels in the lake, as well as, the factor of water overexploitation in the basin, so it is considered that the lake conditions mostly depend on the type of management that is given to the resource. Finally, the results will help the understanding of climate variability and its water resources influence of the Lerma Chapala basin, which will assist in future research.

This paper aims to show that sustainable behavior by firms may be impaired by regulatory restrictions. We challenge the assumption that regulation aimed at curbing greenhouse gas emissions (GHG) on the form of a target to meet the Country’s GHG emissions commitments will promote sustainable corporations. We argue that, in fact, such regulation may impair sustainability practices because it creates unintended consequences. This paper tackles the efficiency of the institutional framework chosen through the lenses of the analytical themes of fit, scale and interplay, then we use a systems dynamic approach to represent how regulation in the arenas of energy efficiency and GHG emissions reduction may withhold competitive business outcomes and corporate sustainability schemes. We exemplify and simulate a single regulation scheme and found that as a result of the institutional scheme chosen, the system is dominated by negative feedback processes resulting in lesser outcomes that would be better tackled by firms not being subject to the restrictions imposed by the regulation.

This work presents a heat transfer and boiling model that computes the evolution of the temperature field in a representative steel workpiece quenched from 850 or 930°C by immersion in water flowing at average velocities of 0.2 or 0.6 m/s, respectively. Under these conditions, all three boiling regimes were present during cooling: stable vapor film, nucleate boiling, and single-phase convection. The model was based on the numerical solution of the heat conduction equation coupled to the solution of the energy and momentum equations for water. The mixture phase approach was adopted using the Lee model to compute the rates of water evaporation-condensation. Heat flux at the wall was calculated for all regimes using a single semi-mechanistic model. Therefore, evolution of boiling regimes at every position on the wall surface was automatically determined. Predictions were validated using laboratory results, namely: a) Videorecording the upward motion of the wetting front along the workpiece wall surface, and b) cooling curves obtained with embedded thermocouples in the steel probe. Wall heat flux calculations were used to determine the importance of the simultaneous presence of all three boiling regimes on the heat flux distribution. It was found that this simultaneous presence leads to high heat flux variations that should be avoided in production lines.

Within the past decade, the aerospace engineering industry has evolved outside the constraints of using single, large, custom satellites. Due to increased reliability and robustness of commercial off the shelf (COTS) printed circuit board (PCB) components, missions instead have transitioned towards deploying swarms of smaller satellites. This approach significantly decreases the mission cost by reducing custom engineering and deployment expenses. Nanosatellites are able to be quickly developed with a more modular design at lowered risk. The Alpha mission at Cornell Space Systems Studio is fabricated in this manner. However, for the purpose of this mission, only one satellite was initially developed. This manuscript will discuss a systems engineering approach to the development of this satellite. As a disclaimer, this manuscript is written from a systems perspective. Therefore it will follow many subsystems from a wide range of functionalities. The research in this manuscript was kept broad with the hope to contribute to the mission as a system, through a range of development phases including validation and verification of existing methods. The two systems that will be primarily focused on are the Attitude Control System (ACS) of the carrier nanosatellite (cubesat), and the RF communications on the ex-creted picosatellites (chipsat). Milestones achieved in chipsat RF include chipsat to chipsat communication, chipsat to SDR ground station communication, packet creation, error correction, appending a preamble, and filtering the signal. Achievements on the ACS side included controller traceability/verification and validation, software rigidity tests, hardware endurance testing, Kane damper and IMU tuning. These developments matured the technological readiness level (TRL) of our systems in preparation for satellite deployment.

Anthropogenic disturbances interacting with natural disturbances, ecological and socio-economic factors can provoke forest degradation and modulate ecosystem resilience. In Haiti, protected areas recently created to reduce forest loss, require studies about forest dynamics and land use to assure the development of sustainable management policies. We combine field interview with Landsat satellite images of the Macaya National Park collected between 1985 and 2021 to investigate: 1) how much of the original forest area has been converted into agricultural or logged area since 1985; and 2) how do elevation and slope influence the expansion of human-induced land-use changes. Our results indicate an increase of 11.36% in forest cover and a reduction of 75.34% in agriculture class cover, despite the passage of seven hurricanes in the region. Forest recovery was apparently unrelated to elevation and slope, and likely reflected the implementation of new environmental laws and policies with the creation of the Macaya National Park in 1983. Restoration and protection programs contributed to ensure access to financial resources, technical assistance and new technology, thus promoting a shift into a more resilient forest system. This study brings hope for forest conservation in Haiti by showing that positive results can be achieved through inclusive collaboration.

Spatial light modulators (SLMs) have been widely used to achieve dynamic control of optical traps. Often, holographic optical tweezers have been presumed to provide nanometer or sub-nanometer positioning accuracy. It is known that some features concerning the digitalized structure of SLMs cause a loss in steering efficiency of the optical trap, but their effect on trap positioning accuracy has been scarcely analyzed. On the one hand, the SLM look-up-table, which we found to depend on laser power, produces positioning deviations when the trap is moved at the micron scale. On the other hand, phase quantization, which makes linear phase gratings become phase staircase profiles, leads to unexpected local errors in the steering angle. We have tracked optically-trapped microspheres with sub-nanometer accuracy to study the effects on trap positioning, which can be as high as 2 nm in certain cases. We have also implemented a correction strategy that enabled the reduction of errors down to 0.3 nm.

Worldwide anthropogenic activities result in the production and release of poten-tially damaging toxic pollutants into ecosystems, thereby jeopardizing their health and continuity. Research studies and biomonitoring programs attend to this emerging problematic by applying and developing statistically relevant indexes that integrate complex biomarker response data to provide an holistic approach reflecting toxically induced alterations at the organism’s or population level. Ultimately, indexes allow simple result communication, enhancing policy makers understanding, so contributing for better resource and environmental managing policies. In this study three indexes , the Integrated Biomarker Response index (IBR), the Bioeffects Assessment Index (BAI) and the Principal Components Analysis (PCA), were evaluated for their sensitivity in revealing toxically induced stress patterns in cells of the diatom Phaeodactylum tricornutum under contaminant exposure. The set of biomarkers selected for index construction comprise the anti-oxidant enzymes APX, CAT and SOD, and the lipid peroxidation marker TBARS. Several significant inverse correlations with the concentration gradients applied, , was noticed for all indexes, though, the IBR excels for its reliability in delivering statistically significant dose-response patterns for four out of the five compounds tested.

This paper proposes an upper bound for mine productivity and also a simple truck dispatch rule that demonstrates how tight the upper bound can be using simulation. It also proposes a greedy search to approximate the productivity upper bound, which is faster and often exact. Uncertainty is added to the simulation in order to verify how the productivity responds to it. Typically, the productivity upper bound is less tight close to its saturation point as a function of the number of trucks, where adding more trucks only increases queues. Furthermore, more uncertainty in the model typically leads to a less tight upper bound. The results are conducted using real data from an open pit mine in Brazil.

Nurses experience significant stress and emotional exhaustion, leading to burnout and fatigue. This study assessed how the nurses’ mood and fatigue evolves during their shifts, and the lagged and accumulated factors that influence these phenomena. A two-level design with repeated measures was applied to a sample of 113 nurses, performing an ecological momentary assessment of different parameters and multilevel longitudinal two-level modelling of the data. Accordingly, mood appeared to be explained by effort, by the negative lagged effect of reward and by accumulated effort, each following a quadratic trend, and it was influenced by previously executing a direct care task. By contrast, fatigue was explained by the current and lagged effect of effort, by the lagged effect of reward and by accumulated effort, again following quadratic trends. Fatigue was also associated with direct care, and the prior effect of documentation and communication tasks. Mood was also explained by problem-focused and emotion-focused coping strategies, indicative of negative mood, and by support-seeking and refusal coping strategies. Hence, mood and fatigue do not depend on a single factor like workload but rather, on the evolution and distribution of tasks, as well as on the stress during a shift and how it is handled.

This study aimed to assess the enhancement of physical fitness and quality of life through an 8 weeks strength program training in male adolescents soccer players. A lower body muscle groups intervention was performed, with 17 players in the experimental group (EG) and 15 in the control group (CG). The EG carried out soccer training complemented by specific strength work. Pre and post- intervention assessments included body composition, jump height, speed with change of direction, maximum speed in 20 m, movement velocity in back-squat, perceived fatigue effort, academic performance and quality of life. A general linear repeated measures model analysis was used considering for each variable, the interaction between groups (CG, EG) and time (basal, final), to analyze the differences between and within groups. The results showed reduction of fat in the upper limbs and trunk EG, improvements in jump height, maximum speed of 20 m, changes of direction and quality of life increased (p<0.05) in the EG too. It was concluded that a strength program could improve some components of physical performance in male adolescents soccer players.

The incidence of infections due to carbapenemase-producing Enterobacteriaceae (CPE) is rising worldwide. We present the case of a 48-year-old female patient, diabetic, with previous episodes of urinary tract infections that was admitted due to pyelonephritis, later identified to be caused by KPC and ESBL-producing Klebsiella pneumoniae. Both the patient and her family had no strong epidemiological link with the healthcare system, and for this reason, this case stands out in regional literature since similar reports are scarce and therefore constitutes a reason for alert in health institutions. Further studies are needed in order to ascertain the real incidence of these infections in community settings in Latin America and the Caribbean.

The review of previous works shows this study is the first attempt to analyse the lockdown effect using Natural Language Processing Techniques, particularly sentiment analysis methods applied at large scale. On the other hand, it is also the first of its kind to analyse the impact of COVID 19 on the university community jointly on staff and students and with a multi-country perspective. The main overall findings of this work show that the most often related words were family, anxiety, house and life. On another front, it has also been shown that staff have a slightly less negative perception of the consequences of COVID in their daily life. We have used artificial intelligence models like swivel embedding and the Multilayer Perceptron, as classification algorithms. The performance reached in terms of accuracy metric are 88.8% and 88.5%, for student and staff respectively. The main conclusion of our study is that higher education institutions and policymakers around the world may benefit from these findings while formulating policy recommendations and strategies to support students during this and any future pandemics.

The increasing demand for higher inclusion cleanliness levels motivates the control over the formation and evolution of inclusions in the steel production process. In this work, the evolution of the chemical composition and size distribution of inclusions throughout a slab production process of Al-killed steel, including ladle furnace (LF) treatment and continuous casting (CC), was followed. The initial solid Al2O3 and Al2O3-MgO inclusions were modified to liquid Al2O3-CaO-MgO inclusions during LF treatment. The evolution of the size distributions during LF treatment was associated with the growth and removal of inclusions, as new inclusions were not created after the deoxidation process, according to a population density function (PDF) analysis. Additionally, the size distributions tended to be similar as the LF treatment progressed regardless of their initial features, whereas they differed during CC. Analysis of the upper tails of the distributions through generalized extreme values theory showed that inclusion distributions shifted from larger to smaller sizes as the process progressed. There were great changes in the distributions of large inclusions throughout the LF treatment and between the end of the LF treatment and the start of the CC process. Additionally, distributions of large inclusions differed at the end of the LF treatment, whereas such differences decreased as CC progressed.

Current methods for the hardening step of functional coatings over different materials imply the use of high temperatures, high energy consumption or long periods of time, which have repercussions on the speed and cost of the product. We report here a simple and low cost methodology for the functionalization of low cost stainless steel, which is modular, depending of the functionality pursued: a levelling layer for smooth the surface of the material, an “easy to clean” property, or both of them. The research is based on sol-gel coatings cured under UV light without requiring high thermal hardening processes making it applicable to plastics and other sensible materials and possessing high chemical and thermal stability. The film ensures lower processing costs, and higher rates of hardening if the adequate medium-pressure lamps are employed. This formulation is also well defined for scaling up the process, so it is possible to perform a continuous coating in large areas by employing mild processing conditions (low temperature, atmospheric pressure). In addition, the sol gel solution was fully characterized and studied in order to guarantee a long service life before deposition, with a focus on industrial applications in the domestic sector.

In this paper we establish information theoretical bridges between 1) Thermal Heisenberg uncertainties $\Delta x \Delta p$ (at temperature $T$), and 2) LMC structural quantifiers. After having achieved such purpose, we determine to what an extent our bridges can be extended to both the semi classical and classical realms. Also, we find a strict bound relating a special LMC structural quantifier to quantum uncertainties.

The objective of this research article is to determine if social and cultural capital are factors that cause inequalities in the level of knowledge in civic and citizenship education, between Latin American and European countries. To achieve this purpose, information from the National Study of Civic and Citizen Education -ICCS-, of the International Association for the Evaluation of Educational Achievement -IEA-, of the year 2016, is used. Methodologically speaking, the Educational Production Function -EPF- is estimated and subsequently, the Oaxaca-Blinder decomposition technique is applied to quantify the differences in civic and citizenship education and see how much they are explained by the characteristics of the student and their family. the school, the social and cultural capital. As a main result, educational inequalities were found in favor of European countries, and are due to a greater extent to differences in school resources, between Latin American and European countries, followed by differences in social and cultural capital, therefore, it is the European students who make the best use of and benefit from the differences in school endowments and in social and cultural capital.

The ultimate goal of this paper was to examine the degree of elasticity between two variables, namely, agricultural credit and agricultural growth, in Angola in the period 2003–2022. Time series data were fitted into the ARDL test using various econometric techniques such as the ADF stationarity test, Granger causality and the ordinary least squares method as well as a vector error correction model (VECM) to analyze the relationship between agricultural credit and agricultural economic growth, showing a causal relationship. Both the impacts through elasticities and the optimal point existing in this relationship were estimated. It was concluded that the impact of agricultural credit on agricultural GDP was 14.41%. Granger causality shows signs of a positive linkage between agricultural credit and agricultural GDP. However, there is a causal relationship between agricultural credit and agricultural GDP, in a unidirectional aspect. This result is consistent with most of the earlier studies reviewed in the literature, confirming that credit-oriented monetary policies can boost economic growth and, consequently, development in Angola. It is important for agricultural credit systems to be designed in a way that ensures equitable access, fair interest rates, and appropriate risk management mechanisms. Additionally, monitoring and evaluation mechanisms should be in place to assess the environmental and social impacts of credit programs on agricultural sustainability. It is worth noting that this is a first-of-a-kind study on the matter of the Angolan credit experience, specifically for the agricultural sector. Angola is still searching for a sustainable credit model that could be used as a catalyzer to boost growth and contribute to economic development.

Many strategies have been developed for the synthesis of silicon carbide (SiC) thin films on silicon (Si) substrates by plasma-based deposition techniques, especially plasma enhanced chemical vapor deposition (PECVD) and magnetron sputtering, due to importance of these materials for microelectronics and related fields. A drawback is the large lattice mismatch between SiC and Si. The insertion of a thin aluminum nitride (AlN) buffer layer between them has been shown useful to overcome this problem. Herein, the high-power impulse magnetron sputtering (HiPIMS) technique was used to grow SiC thin films on AlN/Si substrates. Furthermore, the SiC films were also grown on Si substrates. Comparisons of the structural and chemical properties of SiC thin films grown on the two types of substrates allowed us to evaluate the influence of AlN buffer layer on such properties. The chemical composition and stoichiometry of the samples were investigated by Rutherford backscattering spectrometry (RBS) and Raman spectroscopy, while the crystallinity was characterized by grazing incidence X-ray diffraction (GIXRD). Our set of results evidenced the versatility of HiPIMS technique to produce polycrystalline SiC thin films at near room temperature only varying the discharge power. In addition, this study opens up a feasible route for the deposition of crystalline SiC films with a good structural quality using AlN buffer layer.

Despite increased hurricane intensity, the U.S. Gulf of Mexico coast has experienced dramatic coastal population increase of 24.5% from 2000 to 2016. However, in coastal Louisiana areas with dramatic wetland loss, parishes have experienced population declines and lower rates of population growth. Therefore, understanding the magnitude of the effect of wetland loss as a main driver in population loss in coastal Louisiana is critical. Using regression analysis, this study finds that wetland loss has a significant and persistent negative effect on population growth in coastal Louisiana. This effect resulted in a reduction in the population growth rate in coastal parishes over time. A counterfactual simulation was conducted to estimate the potential population size in the absence of wetland loss from 1990 to 2021. On average, the effect of 1 hectare of wetland lost causes a reduction of approximately 1000 persons. This indicates that for the year 2021, the population was approximately 18% lower than the population that would have existed in the absence of wetland loss. This research underscores the role of wetlands in providing direct and indirect benefits to people in coastal Louisiana that are ultimately reflected in its population levels.

Post-viral fatigue syndrome (PVFS) encompasses a wide range of complex neuroimmune disorders of unknown cause characterized by disabling post-exertional fatigue, myalgia and joint pain, cognitive impairments, unrefreshing sleep, autonomic dysfunction, and neuropsychiatric symptoms. It includes myalgic encephalomyelitis, also known as chronic fatigue syndrome (ME/CFS), fibromyalgia (FM), and more recently post-COVID-19 condition (Long COVID). To date, there are no definitive clinical case criteria and no FDA-approved pharmacological therapies for PVFS. Given the current lack of effective treatments, there is a need to develop novel therapeutic strategies for these disorders. Mitochondria, the cellular organelles responsible for tissue energy production, have recently garnered attention in research into PVFS due to their crucial role in cellular bioenergetic metabolism in these conditions. Accumulating literature has identified a link between mitochondrial dysfunction and low-grade systemic inflammation in ME/CFS, FM, and Long COVID. To address this issue, this article aimed to critically review the evidence relating to mitochondrial dysfunction in the pathogenesis of these disorders; in particular, to evaluate the effectiveness of coenzyme Q10 supplementation on chronic fatigue and pain symptoms as a novel therapeutic strategy for the treatment of PVFS.

The present study uses the 3 years of data from a vertically pointed profile Radar (VPPR) at the mountain site (Huancayo at 3.2 km msl; HYO) in Peru to investigate the precipitation characteristics/patterns including diurnal variation, bright band (BB) characteristics and vertical structure of rain (VSR). VPPR provides continuous 1­min profiles of radar reflectivity (Ze), rain rate (RR), liquid water content (LWC) and Doppler velocity. At the same time, field campaign data are used to investigate the role of the surface and atmospheric variables in generating the rainfall and organization of the cloud systems over HYO. The precipitation shows the bimodal distribution; frequent and higher RR during afternoon and nighttime. The BB height also shows a diurnal pattern and BB height is higher during the afternoon and nighttime compared; and follows the diurnal heating of the Andes. More than 70% BB height lies between ~4.3­4.7 km and only 20% BB has altitude higher than 5 km. The austral summer monsoon (December to March months) have higher intense vertical profiles (higher Z e ) compared to pre monsoon seasons (September to November) and shows the nega­tive gradient for most of the altitude. The RR and LWC show the opposite characteristics, and both have a positive gradient below the 6 km altitude and then negative gradient above 6 km altitude. The raindrop size distribution (DSD) parameters show most of the variation below the freezing level, and a higher concentra­tion of large sized of hydrometeors are observed for higher RR, however the dominant modes of Dm are less than 1 mm. The changes in the VSR in DSD parameters are significant for the RR>20 mm/h, whereas for RR<2 mm/h the vertical structure in DSD parameters do not have much differences during monsoon and premonsoon seasons. Satellite and reanalysis data reveal the short periods of convective activity with higher ac­ cumulated rainfall over HYO compared to stratiform precipitation, which is more common in the nighttime and sustain for many hours. Wet spells (higher rainy days) have low pressure circulation, which favours the transport of moisture from the Amazon to the central Sierra of Peru, while the anticyclonic circulation at high levels favours the divergence at higher pressure levels and, enhances the convective in the region. During the dry spells, low level weaker circulation at the west of Brazil, restricts the transport of moisture to the central Sierra, while the circulation at high levels does not favor rain processes. The improved understanding of the tropical Andes precipitation would be very important for assessing climate variability and changes as well as to forecast precipitation using the numerical models.

The use of modulator drugs that target the cystic fibrosis transmembrane conductance regulator (CFTR) is the final frontier in the treatment of Cystic Fibrosis (CF), a genetic multiorgan disease. F508del is the most common mutation causing defective formation and function of CFTR. Elexacaftor-tezacaftor-ivacaftor is the first triple combination of CFTR modulators. Herein we report on a one-year case-control study that involved 26 patients with at least one F508del mutation. Patients were assigned to two similar groups, with patients with the worse clinical condition receiving treatment with the triple combination therapy. The study aims to define the clinical and especially microbiological implications of treatment administration. The treatment provided significant clinical benefits in terms of respiratory, pancreatic and sweat function. After one year of therapy, airway infection rates decreased and pulmonary exacerbations were dramatically reduced. Finally, treated patients reported a surprising improvement in their quality of life. The use of triple combination therapy has become essential in most CF people carrying the F508del mutation. While the clinical and instrumental benefits of treatment are thoroughly known, further investigations are needed to properly define its microbiological respiratory implications and establish the real advantage of life-long treatment with elexacaftor-tezacaftor-ivacaftor.

Objective: In low- and middle-income countries (LMICs), household survey data are a main source of information for planning, evaluation, and decision-making. Standard surveys are based on censuses, however, for many LMICs it has been more than ten years since their last census and they face high urban growth rates. Over the last decade, survey designers have begun to use modelled gridded population estimates as sample frames. We summarize the state of the emerging field of gridded population survey sampling, focussing on LMICs. Methods: We performed a systematic review and identified 43 national and sub-national gridded population-based household surveys implemented across 29 LMICs. Findings: Gridded population surveys used automated and manual approaches to derive clusters from WorldPop and LandScan gridded population estimates. After sampling, many surveys interviewed all households in each cluster or segment, though some sampled households from larger clusters. Tools to select gridded population survey clusters include the GridSample R package, Geo-sampling tool, and GridSample.org. In the field, gridded population surveys generally relied on geographically accurate maps based on satellite imagery or OpenStreetMap, and a tablet or GPS technology for navigation. Conclusions: For gridded population survey sampling to be adopted more widely, several strategic questions need answering regarding cell-level accuracy and uncertainty of gridded population estimates, the methods used to group/split cells into sample frame units, design effects of new sample designs, and feasibility of tools and methods to implement surveys across diverse settings.

This article presents a method that uses a semi-automatic algorithm for the detection and analysis of microcracks in steel test specimens using binarized image analysis. It obtains the length along the crack path in contrast to previous methods that have obtained linear length, thereby achieving a closer approximation to its actual value. Additionally, this method automatically calculates the COD and COA parameters with measurement deviations in micrometres, thus providing greater precision than previous methods proposed to date.

The potential of biological consortia designed for laccase production and dye treatment is discussed in this review. The poor yields in laccase production and low efficiency in dye decolorization of monoculture-based treatments has encouraged the use of designed biological consortia. A consortium is a system where the growth of two or more organisms, chosen to improve a particular bioprocess, is induced in the same medium. Chemical and natural mediators are being replaced by consortia for the production of laccases because, in addition to being less toxic, they induce new enzyme isoforms and lead to high laccase yields. On the other hand, consortia act synergistically in the decolorization of azo dyes through the enzymes they produce, so overall degradation is improved. Designed consortia are an attractive alternative still in development that could provide new biotechnological tools for the treatment of textile effluents.

Background: to know the existing documentation related to exogenous melatonin in the performance of professional soccer players. Methods: critical and systematic review. Data were obtained by looking up the following bibliographic data bases: Web of Science, MEDLINE (via PubMed), Embase, Cochrane Library and Scopus. The used terms were "Soccer Athlete", "Melatonin" and "Soccer Performance", using as a filter: "Humans". The search update was in May 2023. Results: having applied the inclusion and exclusion criteria, 8 articles were selected out of 59 retrieved references. The dose of melatonin administered in the studies ranged between 5 and 8 mg. The outcomes showed a decrease in oxidative stress, muscle damage and inflammatory markers in the melatonin-treated group. Conclusions: Exogenously administered melatonin seems to attenuate some of the effects derived from physical exercise such as oxidative stress, inflammation and muscle damage in professional soccer players, and since it has no potential adverse effects, it could be interesting to apply it in this population. However, the direct effects of melatonin supplementation on physical performance have not been demonstrated, so more research is needed on the intervention period, effective dose and larger participant populations.

Knowledge of body composition is essential for athletes for their sport performance. It has yet to be determined whether differences in body composition are present between international and non-international players playing in the same elite professional club competition. Similarly, it is not yet clear whether differences in body composition according to ethnic origin exist in the elite professional game, where relative homogeneity is to be expected among soccer players. There is no single anthropometric profile that guarantees sporting success, as the somatotype of football players differs according to their individual characteristics. The aim of this study was to assess the description and comparison of the body composition profile of latin american professional football players playing in european leagues. The sample was composed of 238 subjects football players from European professional football leagues. Differences were found in all variables measured. The present study shows that in Latin American professional football players playing in Europe, there are significant differences in different body composition variables such as weight, height, WC, skinfold and fat values. This means that the treatment of these data and the possible classifications of sporting performance carried out in football clubs should be different to other European or African-American football players.

Purpose: The goal of the present study was to investigate chief executives’ intention and potential to create a family-supportive culture in the Brazilian context, further assessing the role of their aspirations in their employees’ perceptions. Methodology: Two researchers conducted 60 minutes of online semi-structured interviews with CEOs of seven companies of different sizes (measured by the number of employees), economic sectors, and capital structure. To complement the data gathered from CEOs, we also conducted private and individual 30-minute online interviews with three employees from each company. Findings: A total of four categories and 11 sub-categories emerged from the analysis of CEO interviews, and four categories and six sub-categories emerged from the analysis of employee interviews. Originality: The results suggest that family-supportive culture is promoted through behaviors that are consistent with the organization’s core values, as well as through commitment of the agenda and resources of the company’s leadership team.

The prevalence of diagnosed cases of autism has increased rapidly, which raise interest in studying the variables related to the well-being of these families. The purpose of this paper is to review recent literature on other variables related to family well-being such a parenting styles. We conducted a systematic review using PRISMA check list and bias assessment ESTROBE with the aim of analyzing if the concepts of autism, well-being and parenting style are related. We screened 753 references, 16 full text articles and abstracts were read. It was identified that authoritative parenting style, those based on warmth, establishing relationships and emotional bonding, and low expressed emotion were positively related to family well-being. On the other hand, authoritarian, permissive and overprotective styles, as well as critical, punishing and training-based were negatively associated with well-being and quality of family life.

Industry 4.0 (I4.0) epitomizes the nexus of technological evolution and manufacturing process enhancements, underpinned by four critical pillars: Cyber-Physical Systems (CPS), Digital Twins (DT), the Industrial Internet of Things (IIoT), and Cloud Computing (CC). Through the lens of the German Reference Architectural Model Industrie (RAMI) 4.0, these components are integral to fostering Smart Manufacturing (SM) practices. In conjunction, the Asset Administration Shell (AAS) facilitates seamless inter-company communication and enables adaptability to fluctuating market demands. This paper delves into the structural intricacies of AAS and SM within the RAMI 4.0 framework, unveiling three distinct implementation strategies. Furthermore, it meticulously scrutinizes challenges that hinder the full realization of I4.0 potential, such as interoperability, security concerns, and standardized communication protocols. By examining these models and identifying current barriers, the study illuminates pathways for future research, particularly in enhancing the integration of AAS and SM systems, ensuring robust security measures, and advocating for the development of universal standards. This exploration aims to contribute to the ongoing discourse on I4.0, proposing avenues for advancing manufacturing technologies and operational frameworks in alignment with the principles of RAMI 4.0.

Despite polycarbonate (PC) being a widely used engineering plastic, its notch and crack sensitivity pose challenges in critical applications. To address this, PC was blended with elastomeric polymers to explore the improvement in toughness. This study systematically investigates the toughening mechanisms of PC blended with acrylonitrile-butadiene-styrene (ABS), copolyether ester elas-tomer (COPE), and ABS and styrene-ethylene-butylene-styrene (SEBS) copolymer grafted with maleic anhydride (MA). The morphology and mechanical behavior were evaluated under qua-si-static and high-speed tensile tests and Charpy impact tests using optical, electronic, and atomic force microscopy and Raman spectroscopy. The morphological analysis reveals cavitation and crazing phenomena for COPE and SEBS-g-MA systems, and mostly debonding for ABS, indicating an improvement in toughening. While the addition of ABS improves the PC plastic deformation, modifying ABS with maleic anhydride enhances the elastic modulus. Blending PC with SEBS-g-MA increases the strain at break, and the addition of COPE significantly improves the deformation behavior of PC (by around 115%). This comparative study provides valuable insights into the performance of different PC-elastomer blends under similar conditions, supporting the selection of appropriate materials for given applications.

Este estudio empleó el algoritmo MaxEnt para evaluar la distribución potencial de la serpiente de cascabel de cola larga, Crotalus stejnegeri , una especie amenazada endémica de México. Los resultados demuestran una buena fiabilidad del modelo, alcanzando un AUC de 0,879. Destacan una distribución potencial concentrada en las estribaciones de la Sierra Madre Occidental, principalmente en el centro-sur de Sinaloa, suroeste de Durango y norte de Nayarit, caracterizada por bosque seco tropical. La temperatura durante el trimestre más seco y la estacionalidad de la precipitación se identifican como factores determinantes, mientras que la baja idoneidad en Chihuahua sugiere una afinidad tropical de la especie. La variabilidad en las precipitaciones durante el trimestre más frío enfatiza la importancia de ampliar el número de registros de ocurrencia de la especie mediante una mayor exploración de campo dentro de su área de distribución. Estos hallazgos proporcionan información valiosa para los esfuerzos de conservación y subrayan áreas clave para futuras investigaciones.

Universities have increasingly incorporated a third mission into their strategic planning. In addition to teaching and research, they have emphasised the training of entrepreneurs. However, there is still a lot of work to be done, as this process is facing resistance. The Entrepreneurial University covers all disciplines, including faculties of education. However, it has been shown that entrepreneurship tends to be more related to the faculties of economics and engineering, with a lesser presence in the faculties of education for various reasons: they consider entrepreneurship to be alien to their teaching role, there is a lack of entrepreneurial culture, and the objective of the Entrepreneurial University is unknown. The aim of this study is to analyse the level of entrepreneurship in Spanish faculties and schools of education. Forty deans and heads of education faculties in Spain took part in the survey. The results indicated a sufficient level of entrepreneurship; the dimensions related to active methodologies, and mission and strategy were the most developed, whereas entrepreneurship funding and entrepreneurship training for faculty employees were the least developed areas. Some deans noted that entrepreneurship was alien to their professional performance, although courses and good practices for the development of entrepreneurial initiative are gradually being implemented.

Myalgic Encephalomyelitis, also known as Chronic Fatigue Syndrome (ME/CFS) and Long COVID are characterized by debilitating post-exertional malaise and other core symptoms related to immune dysregulation resultant from post-viral infection, including mitochondrial dysfunction, chronic neuroinflammation and gut dysbiosis. The reported associations between altered microbiota composition and cardinal symptoms of ME/CFS and Long COVID, suggesting that use of microbial preparations, such as probiotics, by restoring the homeostasis of the brain-immune-gut axis may help in the management of symptoms in both conditions. Therefore, this review aims to investigate the implications of alerted gut microbiome and assess the evidence supporting use of microbial-based preparations, including probiotics, synbiotics, postbiotics alone and/or in combination with other nutraceuticals in the management of fatigue, inflammation, as well as neuropsychiatric and gastrointestinal symptoms among patients with ME/CFS and Long COVID.

Human societies demand sustainable alternatives for goods and services. Plants are sustainable sources of important metabolites with beneficial impacts on human health. There are many reported methodologies and commercial suppliers for extract preparations from the plant Mucuna sp. They usually claim to be enriched in L-dopa, their distinctive metabolite. However, there are poor characterizations of the metabolite's components in that extracts. Here, we present the metabolite characterization of a Mucuna seed extract, emphasizing the L-dopa identification and quantification. To obtain the extracts, we follow a green and sustainable extraction protocol. The lyophilized extract was subject to liquid chromatography and mass spectrometry to identify its primary metabolites. Additionally, we follow thin-layer chromatography to identify some carbohydrates in the sample. The resultant extract has a 56% L-dopa. Other main components in the extract were arginine, stizolamine, and the fructooligosaccharides sucrose and nystose. The characterized Mucuna extract can be easily standardized as powder presentation and used in several biomedical applications.

The paper examines the evolution and crucial role of energy communities in the context of the transition to renewable energy sources. Such communities are presented as an innovative and resilient response to the challenges posed by climate change. Their importance emerges from their ability to decentralise energy production, increasing local security and reducing dependence on non-renewable energy sources and external suppliers. However, despite the obvious benefits, the contribution highlights several challenges, such as the need for significant upfront investment and the presence of regulatory barriers that may hinder the integration of these solutions into existing energy systems. A detailed bibliometric analysis is used, focusing on specific research areas and using tools to map the most relevant keywords and emerging trends. The results of the bibliometric analysis highlight how energy communities are emerging as key players in the sustainability landscape, capable of addressing and overcoming contemporary environmental challenges. The research reaffirms the transformative potential of energy communities in promoting a more sustainable and resilient future.

The recycling of common soda-lime glass (SLG) is far from being complete, since the material may contain small polymeric, metallic and ceramic contaminations. This has a negative impact on the quality of new glass articles prepared via re-melting. Alternatively, the full reuse of contaminated cullets could be achieved by low-temperature consolidation into geopolymer-like materials. SLG powders, used either as received or pre-washed in acid solution, were added to a sodium aluminate solution at the room temperature for 3 h, under low-speed mechanical stirring. Microporous semi-crystalline monoliths were formed by the casting of suspensions in plastic molds and cured at 75°C overnight. The monoliths featured hydrosodalite as the main crystalline phase for as received SLG and LTA zeolite in the case of pre-washed SLG. The mechanical properties compared well with those of cementitious materials. Moreover, by addition of coarse glass particles as fillers, the methodology successfully yielded Venetian terrazzo-like samples, which could lead to significant material and energy savings in their manufacture. The proposed approach could also be extended to other difficult-to-reuse glass formulations and provide attractive and versatile up-cycled materials.

Wireless power transfer promises to revolutionize the way we use and power mobile devices. However, low transfer efficiencies prevent this technology from seeing wide scale real-world adoption. The aim of this work is to use quasioptics to develop a system composed of a dielectric lens fed by a phased array to reduce spillover losses, increasing the beam efficiency, while working on the antenna system’s Fresnel zone. The DC-RF electronics, digital beamforming and beam-steering by an FPGA, and radiating 4x4 microstrip patch phased array have been developed and experimented upon, while the lens has been designed and simulated. This paper details these preliminary results, where the phased array radiation pattern was measured, showing that the beam is being generated and steered as expected, prompting the lens construction for the complete system experimentation.

Traceability is the ability to determine the path of a product from purchase to consumption to determine when and where it originated. This paper aimed to determine the factors that influence fishers’ decision-making to participate in tuna traceability program, it also explores the determinants of fish catch for small-scale fishers and the feasibility of implementing tuna traceability in the Davao Gulf, Philippines. The result of the interview showed that the significant factors that highly affected the decision-making of fishers in implementating tuna traceability program: boat capacity, fishing hours and communication of fishers (P≤0.05). Household size, years in community, fishing hours, volume of fish sold, and the fishers' communication in the fishing ground (P≤0.05) were other factors that determined the daily catch of the fishers. The results of this study showed that fishers from the Davao Gulf were willing to be part of traceability program that would sustain and increase the value of their fish catch. Moreover, communication was shown to be critically needed in such programs adjusting it for the fish catch to remain fresh or of good quality. Our study will help in deterring and mitigating illegal, unregulated and unreported fishing (IUU) through fish catch traceability.

The high sensitivity of chiroptical responses to conformational changes and supramolecular interactions has prompted an increasing interest in the development of chiroptical applications. However, prediction and understanding the chiroptical responses of the necessary large systems may not be affordable for calculations at high levels of theory. In order to facilitate the development of chiroptical applications, methodologies capable of evaluating the chiroptical responses of large systems are necessary. Exciton chirality method has been extensively used for the interaction between two independent chromophores through the Davydov model. For systems presenting C2 or D2 symmetry one can get to the same results by applying the selection rules. In the present article, analysis of the selection rules for systems with symmetries Cn and Dn with n = 3 and 4 is used to uncover the origin of their chiroptical responses. We hope that the use of the chiroptical symmetry analysis (CSA) for systems presenting the symmetries explored herein as well as for systems presenting higher symmetries will serve as a useful tool for the development of chiroptical applications.

Volumetric models are a crucial tool for forest management. The study aimed to adjust the mixed model by Schumacher and Hall for estimating commercial volume in a dense ombrophilous forest situated in Ferreira Gomes, Amapá, Brazil. Cubage data from 100 sample trees of 5 species were used to adjust the Schumacher and Hall model in fixed and mixed non-linear forms with the diameter class as a random effect. In addition, the same model was also adjusted for each class to verify whether good equations will be generated by stratifying by diameter class. After analysis, it was found that most of the equations by diameter class do not present all significant parameters. On the other hand, the mixed models using class as a random effect showed good results. Finally, it can be seen that mixed models are a much better alternative than stratification by diameter class for volume estimation.

Geopolymer cement has been popularly studied nowadays compared to ordinary Portland cement because it demonstrated superior environmental advantages due to its lower carbon emissions and waste material utilization. This paper focuses on the formulation of geopolymer cement from nickel-laterite mine waste (NMW) and coal fly ash (CFA) as geopolymer precursors, and sodium hydroxide (SH) and sodium silicate (SS) as alkali activators. Different mix formulations of raw materials are synthesized to produce a geopolymer based from an I-optimal design and obtained different compressive strengths. A mixed formulation of 50% NMW and 50% CFA, SH-to-SS ratio of 0.5, and an activator-to-precursor ratio of 0.429 yielded the highest 28-day unconfined compressive strength (UCS) of 22.10 ± 5.40 MPa. Furthermore, using an optimized formulation of 50.12% NMW, SH-to-SS ratio of 0.516, and an activator-to-precursor ratio of 0.428, a UCS value of 36.30 ± 3.60 MPa was obtained. The result implies that the synthesized geopolymer material can be potentially used for concrete structures and pavers, pedestrian pavers, light traffic pavers, and plain concrete.