Drought is one of the most serious abiotic stressors in the environment, restricting agricultural production by reducing plant growth, development, and productivity. To investigate such a complex and multifaceted stressor and its effects on the plants, a systems biology-based approach is necessitated, entailing the generation of co-expression networks, identification of highly-priority transcription factors (TFs) dynamic mathematical modeling, and computational simulations. Here, we studied a high-resolution drought transcriptome of Arabidopsis. We revealed distinct temporal transcriptional signatures and demonstrated the involvement of specific biological pathways. Generation of a large-scale co-expression network followed by network centrality analyses identified 117 TFs that possess critical properties of hubs, bottlenecks, and high clustering coefficients nodes. Dynamic transcriptional regulatory modeling on integrated TF-target and transcriptome datasets uncovered major transcriptional events during the course of drought stress. Mathematical transcriptional simulations allowed us to ascertain the activation status of major TFs as well as the transcriptional intensity and amplitude of their target genes. Finally, we validated our predictions by providing experimental evidence of gene expression under drought stress for a set of four TFs and their major target genes using qRT-PCR. Taken together, we provided a systems-level perspective on the dynamic transcriptional regulation during drought stress in Arabidopsis and uncovered numerous novel TFs that can potentially be used in future genetic crop engineering programs.

The reinforcing ability of the fillers results in significant improvements in properties of polymer matrix at extremely low filler loadings compared to conventional fillers. In view of this, present review article describes the different methods used in preparation of different rubber nanocomposites reinforced with nanodimensional individual carbonaceous fillers, such as graphene, expanded graphite, single walled carbon nanotubes, multiwalled carbon nanotubes and graphite oxide, graphene oxide and hybrid fillers consisting combination of individual fillers. This is followed by review of mechanical properties (tensile strength, elongation at break, Young modulus, and fracture toughness) and dynamic mechanical properties (glass transition temperature, crystallization temperature, melting point) of these rubber nanocomposites. Finally, Payne and Mullin Effects have also been reviewed in rubber filled with different carbon based nanofillers.

A quantitative analysis of X-ray emission from an electron cyclotron resonance (ECR) plasma was performed to probe the spatial properties of electrons having energy for effective ionisation. A series of measurements were taken by INFN-LNS and ATOMKI, capturing spatially and spectrally resolved X-ray maps as well as volumetric emissions from argon plasma. Comparing the former with model generated maps (involving space-resolved phenomenological electron energy distribution function and geometrical efficiency calculated using ray-tracing MC routine) furnished information on structural aspects of the plasma. Similarly, fitting a model composed of bremsstrahlung and fluorescence to the volumetric X-ray spectrum provided valuable insight into the density and temperature of confined and lost electrons. The latter can be fed back to existing electron kinetics models for simulating more relevant energies, consequently improving theoretical X-ray maps and establishing the method as an excellent indirect diagnostic tool for warm electrons, required for both fundamental and applied research in ECR plasmas.

Evaluation of market connectedness and asymmetric volatility spillover has recently seen a surge in financial risk analytics and portfolio diversification. We carried out a meta-literature review on connectedness and spillovers, providing solid insight into the research field and robust guidelines for future investigation. The review consists of a quantitative bibliometric analysis of 594 papers and a qualitative content analysis of 77 papers covering 1991 to 2021. The results of the meta-citation analysis shows that Diebold's Spillover index (2007) is the predominant method in most works as far as market connectedness and spillover is concerned. With an extensive review, we answered the following objectives (1) Analyze the most influential authors, journals, and publications, (2) Understand the research streams and most studied streams, (3) Understand the theme structure and thematic evolution, and keyword trends, (4) Examine the pattern of collaboration, and most productive affiliations, (5) Explore future research directions and untapped areas. The content analysis revealed the following important research streams in the current literature (1) Asymmetries in the market connectedness, (2) Influence of Macro Factors in the market connectedness and spillover, (3) the Role of Oil in market spillovers and hedging portfolios, (4) Dynamic cross-market connectedness and spillovers. The ongoing financial turmoil and market advancements make market connectedness a vital research topic; thus, our work would significantly contribute to macroeconomic policymakers, researchers and hedging investors.

We reviewed the current status of a Vulnerable seagrass, Halophila beccarii from the coast of India using the published data from 1977-2020. We found that the seagrass, H. beccarii has a pan India distribution on both east and west coast. It is abundant in the intertidal silty-muddy region on the west coast, while on the east coast it is found on sandy habitats, with few exceptions of muddy habitat. H. beccarii was found to be associated with mangroves or smaller seagrass species within a depth limit of 1.7m. Low salinity and high nitrate levels were observed for the H. beccarii meadows of the west coast due to its association with mangroves. The nutrient levels in H. beccarii meadows of India were comparatively lower than other seagrass meadows. Most of the research on H. beccarii has focoused on its morphometrics (41%), reproductive (33%) and distribution (29%) along the coast of India. Reproductive traits such as flowering and fruiting varying according to the seasons of each coast due to the influence of monsoon and its associated temperature, salinity and nutrient influx. H. beccarii has a great potential of various bioactive compounds, which needs further investigation. Habitat disturbance, anthropogenic pollution and coastal development are the major cause of declining H. beccarii ecosystems in India. Significant loss of the seagrass was observed from the west coast of India due to increased coastal development activities. There is a significant need in quantifying H. beccarii population trends, impact of climate and anthropogenic stressors, economic values of ecosystem services and the role of ecological connectivity for better conservation and management of H. beccarii seascapes across India. There is a need for integration of research outcomes in policy framing for preventing the decline and further loss of this vulnerable seagrass ecosystem.

This paper presents work done as part of a transformation effort towards a greener and more sustainable Aluminium manufacturing plant. The effort includes reducing the carbon footprint by minimising waste and increasing operational efficiency. The contribution of this work includes the reduction of waste through the implementation of autonomous, real-time quality measurement and classification at an Aluminium casthouse. Data is collected from the MV20/20 which uses ultrasound pulses to detect molten Aluminium inclusions, which degrade the quality of the metal and cause subsequent metal waste. The sensor measures cleanliness, inclusion counts and distributions from 20 - 160 microns. The contribution of this work is in the development of business analytics to implement condition-based monitoring through anomaly detection, and to classify inclusion types for samples that failed. For anomaly detection, multivariate K-Means and DBSCAN algorithms are compared as they have been proven to work in a wide range of datasets. For classification, a two-stage classifier is implemented. The first stage classifies the success or failure of the sample, while the second stage classifies the inclusion responsible for the failed sample. The algorithms considered include logistic regression, support vector machine, multi-layer perceptron and radial basis function network. The multi-layer perceptron offers the best performance using k-fold cross-validation, and is further tuned using grid search to explore the possibility of an even better performance. The results reveal that the model has achieved a global maximum in performance. Recommendations include the integration of additional sensor systems and the improvements in quality assurance practices.

Viroids are smallest pathogen that consist of non-capsidated, single-stranded non-coding RNA replicons and exploits host factors for their replication and propagation. The severe stunting disease caused by Citrus bark cracking viroid (CBCVd) is a serious threat, which spread rapidly within hop gardens. In this study, we employed comprehensive transcriptome analyses to dissect host-viroid interactions and identify gene expression changes associated with disease development in hop. Our analysis revealed that CBCVd-infection resulted in the massive modulation of activity of over 2000 genes. Expression of genes associated with plant immune responses (protein kinase and mitogen-activated protein kinase), hypersensitive responses, phytohormone signaling pathways, photosynthesis, pigment metabolism, protein metabolism, sugar metabolism and modification and others were altered, which could be attributed to systemic symptom development upon CBCVd-infection in hop. In addition, genes encoding RNA-dependent RNA polymerase, pathogenesis-related protein, chitinase as well as those related to basal defense responses were up-regulated. The expression levels of several genes identified from RNA sequencing analysis were confirmed by qRT-PCR. Our systematic comprehensive CBCVd-responsive transcriptome analysis provides a better understanding and insights into complex viroid-hop plant interaction. This information will assist further in the development of future measures for the prevention of CBCVd spread in hop fields.

Accumulation of extra fats in the body results in disturbance in homeostasis causing obesity. The pathophysiology of obesity has been associated with various genetic, epigenetic factors and the disturbed lifestyles of an individual. One of the outcomes is disturbance in the sleep cycle which leads to sleep disorders. The evolutionary significance of sleep lies in the fact that it saves energy and is crucial for adjustment of an individual to ecological and environmental factors, and thus maintains homeostasis. Sleep has an anabolic function and replenishes the wakefulness-associated loss of glycogen stores. However, the modern lifestyle is well known to disrupt sleep behavior and patterns affecting human health negatively. Alteration in homeostasis leads to several acute and chronic pathophysiological conditions like obesity and related metabolic morbidities being one amongst them. Shorter sleep duration and poor sleep quality are important risk factors associated with the development of obesity and have more adverse effects on energy homeostasis. Consequently, it is crucial to comprehend the obesity and sleep relationship and its therapeutic strategies, given that strong crosstalk exists between energy balance that favors obesity and sleep apnea. It is therefore highly recommended to the people with a high risk of obesity to maintain sleep discipline and good sleep hygiene in our daily life. Interventions are required to improve both sleep quality and quantity, and associated obesity. More focused research is needed for uncovering the pieces of evidence that determine whether such interventions can improve obesity-related health consequences. The present review discusses the important findings on the therapeutic and neuroendocrine mechanisms regulating sleep and obesity.

Call set up success rate (CSSR) in a mobile network is an important quality parameter, which directly influences overall key performance indicators (KPIs) of the network service providers. Network KPIs especially the CSSR is the fraction of the attempts to make a call that result in a successful connection to the dialled number. Nevertheless, all call attempts do not end with a connection to the dialled number. In this research, six sigma methodology is applied to improve the call quality of a legacy mobile network and subsequently to boost comprehensive CSSR of a telecom service provider. This research elucidates an empirical study of improving overall CSSR by employing DMAIC methodology consisting of five stages, e.g. Define, Measure, Analysis, Improve and Control. In addition, analytic hierarchy process (AHP) technique is used for determining the vital causes out of all the identified network parameters affecting overall CSSR. Furthermore, the identified vital parameters are being upgraded in order to improve the overall CSSR and finally the system achieved a higher CSSR.

Cancer is a catchall term that refers to a collection of more than one chronic disease that can adversely affect the body, including the organs of the body. These diseases can be grouped together under the umbrella term "cancer." Cancer is a catch-all term that is used to refer to a number of different diseases. During the process of looking for new chemical entities, it was found that certain compounds with a basic nucleus of benzoic acid (BA) exhibit a remarkable anticancer potential. This was discovered while the researchers were looking for new chemical entities. In the sixteenth century, the aromatic chemical known as BA, which is also known as an aromatic carboxylic acid, was discovered. BA is also referred to as an aromatic carboxylic acid. When it comes to the chemical synthesis of a wide range of different active molecules, the utilization of a sizeable quantity of BA as a raw material is absolutely necessary. In addition to being present in a variety of other naturally occurring compounds, the BA moiety is the component that is responsible for the activity of the naturally occurring compounds vanillin, gallic acid, and syringic acid. In the synthesis of a wide variety of synthetic bioactive molecules, the BA scaffold is utilized as a building block. The drugs furosemide, bumetanide, benzocaine, tetracaine, and bexarotene are all examples of molecules that fall into this category. The scope of this review article allows for the discussion of a number of noteworthy and recent achievements of BA derivatives in terms of their effectiveness against cancer.

Seagrass ecosystems are lost due to habitat disturbance, coastal development and human pressure. We assessed the impact of boat anchors from traditional fishing and recreational activities on the seagrass Halophila ovalis from the Andaman and Nicobar Isalnds of India. The plant density, biomass, morphometrics, canopy height and percentage cover were estimated from two sites of Govind Nagar beach of Andaman and Nicobar Islands. The shoot density of H. ovalis was reduced by physical damage caused by boat anchors. The morphometrics of H. ovalis, such as number of leaves per ramet, leaf length, width and horizontal rhizome length were significantly reduced when impacted by boat anchors. Seagrass canopy height and percentage cover were reduced by 41% and 47% respectively. Though the impact of boat anchors reported here is on small-scale, it may impact feeding grounds of locally endangered dugongs. Therefore, proper management and preventive measures should be implemented to prevent the loss of dugong grass habitats from tourism, recreational and fishing activities.

Multiple mRNA isoforms of the same gene are produced via alternative splicing, a biological mechanism that regulates protein diversity while maintaining genome size. Alternatively spliced mRNA isoforms of the same gene may sometimes have very similar sequence, but they can have significantly diverse effects on cellular function and regulation. The products of alternative splicing have important and diverse functional roles, such as response to environmental stress, regulation of gene expression, human heritable and plant diseases. The mRNA isoforms of the same gene, such as the apoptosis associated CASP3 gene, can have dramatically different functions. The shorter mRNA isoform product CASP3-S inhibits apoptosis, while the longer CASP3-L mRNA isoform promotes apoptosis. Despite the functional importance of mRNA isoforms, very little has been done to annotate their functions. The recent years have however seen the development of several computational methods aimed at predicting mRNA isoform level biological functions. These methods use a wide array of proteo-genomic data to develop machine learning-based mRNA isoform function prediction tools. In this review, we discuss the computational methods developed for predicting the biological function at the individual mRNA isoform level.

In the present work, doped ZnO (ZnO:Al) thin film has been grown on Silicon (Si) substrate by DC sputtering. The obtained thickness of the film is 230 ± 5 nm. The films were subjected to swift heavy ion (SHI) irradiation 120 MeV, Ag⁹⁺ with different fluences ranging from 3 × 10¹¹ to 3 × 10¹³ ions/cm². To study the impact of SHI, both pristine and irradiated samples were characterized to obtain the structural, surface morphological and electrical properties using X-ray diffractometry (XRD), atomic force microscopy (AFM) and hall effect measurement system respectively. From XRD results it is observed that there is change in crystallinity of the film with increase in irradiation fluence. The surface morphological studies through AFM shows the increase in surface roughness with increase in fluence. A significant change is also observed in electrical parameters viz conductivity, mobility and carrier concentration. Conductivity, mobility and carrier concentration decreases with increasing fluence.

The bioindicator potential of seagrass ecosystems in coastal trace metal monitoring is low for tropical island ecosystems. This study evaluated the bioindicator potential of six seagrass species exposed to anthropogenic trace metal pollution in the Andaman and Nicobar Islands (ANI) of India. Sediment and seagrass biomass, samples were analyzed for trace metals (Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) from four locations of ANI exposed to anthropogenic contamination. Geo accumulation Index values indicated moderate trace metal contamination in seagrass sediment. Seagrass trace metal accumulation from sediment was both species-specific and location- specific for ANI. Small seagrass species such as H. ovalis, H. beccarii and H. uninervis accumulated the maximum concentration of six trace metals (Cr, Cu, Fe, Ni, Pb, Zn) in their tissues compared to big seagrass species like T. hemprichii and E. acoroides of ANI. This study indicates leaves of small seagrass and roots of big seagrass species can serve as short- and long-term bioindicators respectively, of coastal trace metal contamination in tropical islands of ANI.

The COVID-19 pandemic has impacted the healthcare system across the globe, leading to more than 6.9 million deaths in the past four years. Cardiac Arrest is a terminal event with associated significantly high morbidity and mortality across age groups. Multiple clinical parameters, organ dysfunction, and chronic co-morbid conditions impact mortality in COVID-19 patients with heart failure. In this retrospective, administrative dataset-based study on 148899 patients admitted to the hospital with COVID-19 and heart failure diagnosis, we reported 6703 cardiac arrests and 5783 mortality. We have used ICD 10 codes to identify the diagnosis. The primary objective of the study is to find the predictors of Cardiac Arrest among patients admitted to hospitals with COVID-19 and heart failure. Secondary objective is to calculate the percentage of cardiac Arrest and mortality across the various age groups and the correlation of hours on the mechanical ventilator and mortality. Study results have shown that the use of a mechanical ventilator has the strongest co-correlation with cardiac Arrest with an odd ratio of 14.4, followed by septic shock with an odd ratio of 5.6, tension pneumothorax with an odd ratio of 4.9 preceding the acute renal failure with an odd ratio of 2.4 and sepsis 2.3. Complete heart block had an odd ratio of 1.9, followed by ESRD with a ratio of 1.6, acute pulmonary embolism with an odd ratio of 1.5, and Type 2 MI with an odd ratio of 1.49. Chronic co-morbid condition of DM had an odd ratio of 1.3, followed by Atrial fibrillation with an odd ratio of 1.1. These results and findings emphasized that multi-organ failure has a huge impact on cardiac Arrest among COVID-19 patients with heart failure.

ABSTRACT Underwater mines may destroy friendly submarines and marine habitats, compromising nonmilitary security. Finding credible information is vital to avoiding scams and spotting hazards. This article employs Supervised Machine literacy models to appropriately categorize subsea items like mines or gems based on Sonar sounds. Python constructs three double classifier models using Gorman and Sejnowski (1988) training data. Through the extraction of key aspects from the Sonar signals, such as spectral components and intensity, the models are able to match newly obtained data with the gemstone order or mine. Delicacy decreases the chance of misidentifications in nonmilitary activities. Machine literacy offers full validation that accommodates real-world Sonar data noise and unpredictability. Based on test results, the highest performing algorithm will deliver the required ratio of accuracy to perceptivity for the bracket task. Central keywords: vaticination model, bracket algorithms, supervised machine literacy, SONAR, and aquatic mining emphasize particular foundations. Improved sophistication in spotting undersea Mines let nonmilitary defence systems respond to proven threats only, preventing friendly submarines or sea life from unnecessary damage owing to false duplicity. This work is a promising start to real-world mine detection devices. Further developments may incorporate greater training data sets, real-time testing on subsea platforms equipped with integrated sonar, and optimization for the discovery of new mine-types. Overall, machine learning and Sonar vision decrease signal fluctuation and noise, making it easier to determine accurate boundaries for non-military applications and environmental protection. The recommended automated discovery technique must balance computational efficiency, generalizability, and delicacy. Prior a real crime, new quality control and verification procedures could boost trust even further.

The present study documented the presence of seagrass Halodule uninervis for the first time along with previously documented Halophila ovalis at Haripur creek. The population structure of both these seagrass species is assessed. The physico-chemical parameters were similar for both seagrass species except for the sediment grain size fractions. The sand content of H. ovalis patches was 1.2-fold higher than H. uninervis beds, whereas the silt content of H. uninervis beds was 2-fold higher than H. ovalis patches. The pH levels were lower than the standard oceanic pH of 8.2. Macroalgae like Ceramium sp. and Gracilaria verrucosa were growing on the leaves of H. uninervis due to high nitrate and phosphate levels of the creek waters. Leaf reddening was only observed in the leaves of H. ovalis. Under similar environmental conditions, H. ovalis (5004 ± 114.51 ind. m-²) had a 2-fold lower shoot density than that of the H. uninervis (11598 ± 187.52 ind. m-²). Both above- and below-ground biomass of H. ovalis (96.34 ± 10.18 and 197.5 ± 18.30 g DW m^-2) was 2-fold lower than that of H. uninervis (198 ±7.45 and 456 ± 9.59 g DW m^-2). H. uninervis leaves were 9-fold longer than that of H. ovalis, whereas H. ovalis leaves were 5-fold wider than H. uninervis. The leaf plastochrone interval is 2.3 days for H. ovalis and 9.6 days for H. uninervis. Consequently, the leaf growth rate of H. ovalis is 2-fold lower than that of H. uninervis. H. ovalis had 2.6-fold longer internodes than H. uninervis. The root length of H. uninervis was longer than H. ovalis. Consequently, the shorter root length of H. ovalis led to higher branching frequency than H. uninervis. The total C and N content were higher in the leaves of H. ovalis than H. uninervis.

Powdery mildew (PM), caused by the fungal pathogen Blumeria graminis f. sp. tritici (Bgt), significantly threatens global bread wheat production. Although the use of resistant cultivars is an effective strategy for managing PM, currently available wheat cultivars lack sufficient levels of resistance. To tackle this challenge, we conducted a comprehensive genome-wide association study (GWAS) using a diverse panel of 286 bread wheat genotypes. Over three consecutive years (2020-21, 2021-22, and 2022-23), these genotypes were extensively evaluated for PM severity under field conditions following inoculation with virulent Bgt isolates. The panel was previously genotyped using the Illumina 90K SNP Infinium iSelect SNP assay to obtain genome-wide SNP marker coverage. By applying FarmCPU, a multilocus mixed model, we identified a total of 113 MTAs located on chromosomes 1A, 1B, 2B, 3A, 3B, 4A, 4B, 5A, 5B, 6B, 7A, and 7B at a significance level of p≤0.001. Notably, four novel MTAs on chromosome 6B were consistently detected in 2020-21 and 2021-22 environments. Furthermore, within the confidence intervals of the identified SNPs, we identified 96 candidate genes belonging to different proteins including 12 disease resistance/host-pathogen interactions related protein families. Among these, protein kinases, leucine-rich repeats, and zinc finger proteins, were of particular interest due to their potential roles in PM resistance. These identified loci can serve as targets for breeding programs aimed at developing disease-resistant wheat cultivars.

The diagnosis of Cardio-Vascular diseases (CVD) is highly dependent on analysis of ECG signals. ECG analysis can be helpful in estimating the underlying cause and condition of heart in cardiac abnormality. The effectiveness of ECG signal analysis in detection of CVDs is widely accepted by professional healthcare service provider. Many algorithms have been proposed but almost all of them have some kind of limitations, and these limitations largely influence the effectiveness of ECG analysis. The performed research work is dedicated for design of unique self-organizing maps (SOMs) based neural network for classification of arrhythmia according to a particular ECG signal, the generation of SOMs is based on the certain unique signatures of ECG signals and have potential to classify different cardiac conditions. For extraction of unique features from ECG signals, we have proposed to use Fast Discrete Stockwell Transform (FDST). Since the proposed technique is a result of combining two different techniques hence called as hybrid technology. The purpose of using FDST is to identify unique signatures of ECG signals in a more improved manner than existing one, the term improved is used because it has several advantages over existing techniques such as wavelet and Fourier Transform based methods. Results obtained from the implementation of the technique are capable in visualizing the ECG sinus rhythm and arrhythmia conditions in form of unique SOM for each associated arrhythmia condition. This unique SOM based classification makes them ideal for being used as a diagnostic tool. This ability of arrhythmia classification using FDST and SOMs makes the technique unique and useful providing valuable information about patient condition. Using proposed technology a portable diagnosis tool for monitoring of patient at their site may be facilitated later, that will improve the quality of life of the patient by diagnosing cardiac condition.

Despite saltmarshes being considered as nature-based solutions (NbS) towards climate change mitigation, India’s saltmarsh ecosystems are least studied. This study quantifies the seasonal variation in carbon stocks mono-specific saltmarsh species (Porteresia coarctata) and its potential to play an important role in India’s climate change mitigation plans. Seasonal (pre-and post-monsoon) sampling of P. coarctata surface water, biomass and 30 cm sediment core was collected across four locations on the east coast of India to quantify sediment dry bulk density (DBD), organic matter (OM%), organic carbon (Corg%), Corg stocks of sediment and biomass, total carbon (C%) and nitrogen (N%) and stable isotopes of δ13C and δ15N. In general, the sediment DBD, OM and Corg of P. coarctata meadows was higher in post-monsoon and was influenced by salinity and pH changes. Isotope (δ¹³C) modelling of various sediment C sources suggested, particulate organic matter (POM) contribution was highest (0.04-0.79%) followed by P. coarctata (0.01–052%) and other macrophytes across our study locations. The seasonal variation of δ¹³C showed increased contribution of marine derived particulate and dissolved organic matter into P. coarctata meadows in post-monsoon season. Heavier δ¹⁵N values were observed in post-monsoon season suggesting anthropogenic input, that was utilized by P. coarctata to increase its above and below-ground biomass and shoot density. The combined ecosystem (30 cm sediment + biomass) Corg stocks of P. coarctata was 1.7-fold higher in post-monsoon (4021.20± 917 Mg C) compared to pre-monsoon (2297.36 ±647 Mg C) season among the four locations with a sediment Corg contribution >70%. Based on the International Panel for Climate Change Tier II assessment the P. coarctata meadows (443 ha) can help in avoiding the pre and post-monsoon emissions of 8431.34 and 14757.84 Mg CO₂ respectively. The combined price of the total CO₂ equivalent stored in P. coarctata meadows in pre- and post-monsoon is US$ 14.50 and US$ 25.38 million respectively. Further studies quantifying the NbS potential of P. coarctata mono-specific and mixed meadows of India’s coast is needed along with integration of saltmarsh ecosystems into India’s National Action Plan on Climate Change.

This review paper delves into the multifaceted aspects of pineapple cultivation, focusing on morphology studies, harvesting challenges, and mechanization efforts. Pineapple, renowned for its commercial value and unique flavor, holds a prominent position in global agriculture, with India alone producing 19.64 lakh tonnes annually. However, the hilly terrains of regions like northeastern India pose significant hurdles to traditional harvesting methods, necessitating innovative solutions. Understanding the morphology of pineapple plants is crucial for optimizing cultivation practices and designing efficient harvesting equipment. Insights from various studies shed light on leaf structure, fruit maturity, and growth patterns, providing valuable information for engineering tailored solutions. Mechanization endeavors, including semi-mechanized harvesting machines and semi-manual harvesters, demonstrate promising results in improving efficiency and reducing labor-intensive practices. Despite challenges such as increased crop losses and operational costs, continued research and development in mechanization hold the key to sustainable pineapple cultivation. This paper underscores the importance of integrating morphology studies and mechanization efforts to address the unique challenges faced by pineapple farmers, particularly in hilly terrains, and highlights the need for ongoing innovation to ensure the long-term sustainability of pineapple cultivation.

Instagram is a popular social media platform among youth, with over a billion active users worldwide. The platform allows users to share photos, videos, and stories and connect with friends and followers. Instagram has become a significant part of youth culture, with many young people spending a considerable amount of time on the app. According to Enterprise (2012:02), Instagram is a community shared among one member with other members from all over the world. This study examines the impact of Instagram on the physical and mental well-being of Indian youth. With the rapid proliferation of social media platforms in India, Instagram has emerged as a prominent influence on the lives and perceptions of young individuals. Studies have shown that using Instagram among youth can have positive and negative effects. On the positive side, Instagram can be a way for young people to express themselves, connect with others, and discover new interests. However, excessive use of the platform can also lead to negative outcomes, such as social comparison, anxiety, and low self-esteem. Instagram addiction among youth is a growing concern. Some young people may feel compelled to check their accounts frequently and may experience negative emotions if they are unable to do so. In extreme cases, excessive use of the platform can interfere with daily activities and relationships, leading to a negative impact on mental health. Parents and educators can play a role in helping young people manage their Instagram use. This can include setting limits on screen time, encouraging healthy online habits, and promoting offline activities and social interaction. Additionally, mental health professionals can offer support to young people who are struggling with addiction or other negative effects of Instagram use. This study explores the prevalence of Instagram dependency among Indian youth.

Instagram has grown in popularity among youth and is currently the second-favorite social network in the world. One of the social media that is widely used nowadays is Instagram. According to Enterprise (2012:02), Instagram is a community shared among one member with other members from all over the world. This study examines the impact of Instagram on the physical and mental well-being of Indian youth. With the rapid proliferation of social media platforms in India, Instagram has emerged as a prominent influence on the lives and perceptions of young individuals.Through a systematic synthesis of existing literature, this review paper critically evaluates the effects of Instagram use on various dimensions of youth well-being, considering both the opportunities and challenges posed by this popular social media platform. The review explores the nuanced relationship between Instagram and youth health outcomes. Specifically, it examines the influence of Instagram on body image perceptions, self-esteem, social comparison, and mental health. The review considers the cultural context and nuances that shape the impact of Instagram within the Indian socio-cultural landscape.

Solid-state transformer (SST) is a promising technology for smart grids due to its flexible power control (better reliability) and high efficacy (by decreasing losses) compared with traditional transformers. The SST is designed in tandem with three stages, i.e., the input, isolation, and output stages. As three converter stages are used to design the SST to make a more reliable device in practice, it is highly prone to instabilities. Moreover, the key objective of SST design is to implement a modern power distribution system to make it more intelligent and reliable. The stability issue can be even more complicated by the presence of distributed energy resources in the distribution system. Thus, the stability of SST must be measured prior to /during the design, and to determine, a state-space model is used, which is developed in this paper. Each stage of SST is modeled with its controller, and the system's stability is measured through the controllability and observability test. Further, the conversion from state-space to transfer function model is done, and the stability of SST is shown using frequency and time-domain diagrams. With these, the different plots, namely, the Bode plot, Nyquist plot, Nichols chart, Root locus, pole-zero plot, and Eigen plot, are used to ascertain the relative and absolute stability. Finally, the SST Simulink model is tested and validated through hardwate-in-the-loop simulation, i.e., OPALRT, to show its effectiveness and applicability.

High prevalence of allergic disorders in Indian pediatric patients demands early diagnosis of allergens so that appropriate allergen avoidance methods, pharmacotherapy or immunotherapy can be provided in time to avoid the worsening of symptoms due to triggers. In this context, identification of the most prevalent aeroallergens in a given area is critical for diagnosis and treatment of various allergic reactions especially in case of rhino-conjunctivitis and asthma. The specific diagnosis of IgE mediated allergy is usually based on the correlation between the clinical history and signs and symptoms endorsed by the diagnostic tests. Skin prick tests are the gold standard however has some limitation. In view of this, the aim of this study was to assess the significance of ImmunoCAP assay for assessing serum specific IgE levels, available in India, against skin prick test by standardized allergens, for the diagnosis of allergic sensitization. A single-center observational study was conducted at tertiary care corporate hospitals in North India from 2017-2020. Patients with self-reported allergic symptoms or whose symptoms were suspected for allergies were tested for the type of sensitization using skin prick test (SPT) after their consents followed by ImmunoCAP based quantification of serum specific IgE levels. A total of 256 (95.9%) pediatric patients were analyzed in the study and were analysed. The patients were most commonly (30% patients) sensitized to D. farinae (173 [67.6%]), D. pteronyssinus (174 [68.0%]), Acarus siro (93 [36.3%]), Lepidoglyphus destructor (96 [37.5%]), Plantago lanceolata (Engl.). The ROC curve of Bermuda grass shows that the AUC of serum-specific IgE is larger than that of SPT (1.000 / 0.881). The receiver operating characteristic (ROC) analysis of serum-specific IgE reference method resulted in the largest AUC of all the allergens taken into consideration (0.711 / 1.000) compared to those of SPT (0.589 / 1.000). These results revealed that serum-specific IgE is more reliable method over prick test for accessing the sensitivity of patient for various allergens. This study may be helpful in performing early diagnosis of allergies as well as in taking appropriate preventive measures for managing life threatening allergic reactions

Seagrasses are considered as efficient bioindicators of coastal trace element contamination. This chapter provides an overview on the trace element accumulation, tolerance and biomonitoring capacity of the various seagrass species distributed along the coast of India. A total of 10 trace elements are reported in seagrasses, 11 in sediment and nine in the water column from India. From the 11 seagrass species studied, 60% of research have focused on Syringodium isoetifolium, Cymodocea serrulata, Cymodocea rotundata and Halophila ovalis. 78% of seagrass trace element research in India is from Palk bay and Gulf of Mannar (GOM), Tamil Nadu and 16% from Lakshadweep Islands. Out of the 10 trace elements, Cd, Cu, Pb and Zn are the most studied in seagrass, Fe, Mn, Ni and Pb in sediment and Cu, Fe, Mg, Ni and Zn in the water column. Accumulation capacity of various trace elements in seagrass were species-specific. S. isoetifolium have the highest concentration of Cd and Mg at Palk bay and Lakshadweep Islands respectively. The concentration of Cu was higher in C. serrulata at GOM. Halodule uninervis and Halophila decipens have the highest concentration of Co, and Cr, Ni, Pb and Zn from Lakshadweep Islands. The highest concentration of Fe and Mn were highest in Halophila beccarii and H. ovalis from the coast of Goa and Palk bay respectively. Threshold levels (>10 mg L^-1) of Cd, Cu, Pb and Zn were observed for C. serrulata, H. ovalis, H. uninervis and T. hemprichii, that can affect the Photo System -II of these seagrasses and exert cellular stress leading to seagrass loss and die-off. High concentration of these elements can exert negative impacts on seagrass associated trophic assemblages and ecosystem functioning. Seagrasses of India can be utilized as bioindicators of coastal trace element contamination but the associated toxicity and human health risks needs further investigation.

Transient receptor potential (TRP) channel family proteins are sensors for pain, which sense variety of thermal and noxious chemicals. Sensory neurons innervating the gut abundantly express TRPA1 and TRPV1 channels and are in close proximity of gut microbes. Emerging evidence indicates a bi-directional gut-brain cross-talk in several entero-neuronal pathologies; however, the direct evidence of TRP channels interacting with gut microbial populations is lacking. Herein, we examine whether and how the knockout (KO) of TRPA1 and TRPV1 channels individually or combined TRPA1/V1 double-knockout (dKO) impacts the gut microbiome in mice. We detect distinct microbiome clusters among the three KO mouse models versus wild-type (WT) mice. All three TRP-KO models have reduced microbial diversity, harbor higher abundance of Bacteroidetes, and reduced proportion of Firmicutes. Specifically distinct arrays in the KO models are determined mainly by S24-7, Bacteroidaceae, Clostridiales, Prevotellaceae, Helicobacteriaceae, Rikenellaceae, and Ruminococcaceae. A1KO mice have lower Prevotella, Desulfovibrio, Bacteroides, Helicobacter and higher Rikenellaceae and Tenericutes; V1KO mice demonstrate higher Ruminococcaceae, Lachnospiraceae, Ruminococcus, Desulfovibrio and Mucispirillum; while A1V1dKO mice exhibit higher Bacteroidetes, Bacteroides and S24-7 and lower Firmicutes, Ruminococcaceae, Oscillospira, Lactobacillus and Sutterella abundance. Also, the abundance of taxa involved in biosynthesis of lipids and primary and secondary bile acids is higher while that of fatty acid biosynthesis-associated taxa is lower in all KO groups. To our knowledge, this is the first study demonstrating distinct gut microbiome signatures in TRPA1, V1 and dKO models and should facilitate prospective studies exploring novel diagnostic/ therapeutic modalities regarding the pathophysiology of TRP channel proteins.

Background: A new coronavirus (SARS-CoV-2) that emerged from Wuhan, Hubei Province, China, has spread throughout the world and is declared a pandemic by the World Health Organization (WHO). A lot remains to be understood of SARS-CoV-2 and the disease (COVID-19). SARS-CoV-2 has until recently been identified as responsible for both asymptomatic and serious life-threatening infections. The unavailability of specific therapeutic agents is a major hurdle in the treatment and management of COVID-19 patients. The present review attempts to evaluate the immunobiochemical aspects of the pathogenesis, diagnosis, and management of SARS-CoV-2 infection. Main Body: This review is a comprehensive evaluation of the data collected through various sources, including Google Scholar, PubMed, and Scopus. The articles were searched and selected using key words such as “Coronavirus disease (COVID-19)”, “Diagnosis of COVID-19”, Pathogenesis of Covid-19”, “management of COVID-19”, “Immunology of COVID-19”, and “Complications of COVID-19”. The study noted that the novel Coronavirus infection could result in an exaggerated immune response, causing a cytokine storm and damaging several organs of the body. The infected patients develop several complications, including immunological, hematological, and biochemical alterations. Consequently, COVID-19 patients may develop cardiovascular, liver, renal, and neurological complications, among others. Conclusion: An increased understanding of the immunobiochemical aspects of the disease may contribute to better management of SARS-CoV-2-infected persons, as evidenced from the available literature. A holistic approach to the management of COVID-19 patients taking into consideration the effect of COVID-19 infection on various organs of the body assumes increased significance in patient management.

Gut microbiota is a complex and dynamic ecosystem that influences various aspects of human health. Unfortunately, there is a lack of literature highlighting the importance of gut microbiome especially in diabetes management. This paper performs bibliometric analysis to establish the rising interest of researchers in this area and the importance of gut microbiota in diabetes management. Subsequently, the study performs a narrative review to provide an overview of the gut microbiota consisting of bacteria, archaea, fungi, and viruses, and its diversity, composition, and variation among individuals. The paper further discusses the role of the gut microbiota in different diseases, including Clostridium difficile infection, behavioral disorders, cancer, obesity, diabetes, atherosclerosis, and inflammatory bowel disease, among others. It emphasizes the link between gut dysbiosis (imbalanced gut microbiota) and the development of chronic metabolic disorders. Additionally, the paper discusses the factor negatively impacting the gut microbiota. The paper concludes by explaining the mechanistic abnormalities that link dysbiosis to type 2 diabetes, including changes in short-chain fatty acid production, amino acid metabolism, bile acid regulation, and the production of specific bacterial products. Thus, the paper highlights the importance of understanding gut microbiota and related mechanisms for developing therapeutic interventions targeting the gut microbiota.

The synthesis of the presented benzo[d]thiazol-2-amine derivatives was performed by condensing-(4-chlorobenzylidene) benzo[d]thiazol-2-amine with a number of substituted phenols in the presence of potassium iodide and anhydrous potassium carbonate in dry acetone. IR spectroscopy, 1HNMRspectroscopy and spectroscopy methods were used to characterize the structural properties of newly synthesized derivatives. In order to observe the attributes of drug-like candidates of these derivatives, the number of their molecular properties was estimated. Benzo[d]thiazol-2-amine derivatives were molecularly docked with selective enzymes COX-1 and COX-2. Findings suggested that Compounds G3, G4, G6, G8 and G11 possess higher binding affinity than diclofenac sodium, when docking was performed with enzyme COX-1. Compounds G1, G3, G6, G8and G10 showed lower binding affinity than Indomethacin when docking performed with enzyme COX-2.In vitro evaluation of the COX-1 and COX-2 enzyme inhibitory activities were performed for synthesized compounds. Compounds 10 and 11 exhibited significant COX-1 and COX- enzyme inhibitory action with IC50 values of 5.0 and 10 µM, respectively. Using the hot plate method and the carrageenan-induced rat paw edema model, the synthesized compounds were screened for their biological activities, including analgesic and anti-inflammatory activities. The highest analgesic action was exhibited by derivative G11and the compound G10 showed the highest anti-inflammatory response.

The present study aimed to undertake a detailed investigation of pathological epidemiology and molecular confirmation of Ehrlichia canis among pet dogs in smart city Bhubaneswar, Odisha, a state in eastern India. A total of 178 dogs were screened for Ehrlichiosis on the basis of history, clinical signs, blood, and buffy coat smear examination, resulting in only 56 dogs (31.46%) screening positive. The epidemiological study recorded an increase in incidences among dogs less than one year of age (41%), males (68%), German Shepherds (25%), dogs more than 20 kg body weight (75%), summer months (55%) and dogs housed on pukka houses with exposure to the outside (59%). The majority of the infected dogs had a history of tick infestation (79%) at some point in their life. Clinical signs showed non-typical manifestations like fever, lethargy, diarrhoea, epistaxis, hind limb edema, and corneal opacity. Haematological studies revealed anaemia and thrombocytopenia along with neutrophilia with relative lymphopenia and monocytosis. A decreasing trend was observed in the levels of total protein and albumin with an increase in the levels of globulin, AST, ALT, BUN, and creatinine. The ultrasonography studies revealed hepatosplenomegaly along with hyper-echogenicity in various organs. Pro-teinuria and haematuria were consistent, along with the presence of bile salts in the urine of affected dogs. Molecular confirmation from n-type PCR data using Ehrlichia-specific primers targeting p28 gene (843 bp) was done, and the identified gene sequences submitted to NCBI databases have accession numbers OQ383671-OQ383674 and OP886674-OP886677. Ticks collected from dogs were identified morphologically through microscopy and scanning electron microscopy as Rhipicephalus sanguineus.

Different water treatment regiments are revealed to have potential in enriching antibiotic resistant bacteria (ARB). Advanced oxidation processes (AOPs) based disinfection techniques have been studied widely in the recent times due to their advantages over conventional treatment methods. However, bacterial response and adaptations against the hostile environments of AOPs is not clearly understood yet. Based on the existing knowledge on the ways in which bacteria surpass the antibiotic treatment, here we propose few important aspects of bacterial adaptation which could be true for AOPs as well since both antibiotics and AOPs generate reactive oxygen species (ROS) during their modes of action. We discuss the plausible role of ROS in the selection of ARB and bacterial heterogeneity as a strategy to bypass the lethal action of AOPs. Understanding bacterial adaptation during disinfection plays a vital role in devising strategies to outclass the bacterial survival. Hence, more importance should be given to such studies in the near future for the successful implementation of AOPs.

A complete halt on all anthropogenic activities and human movement due to COVID-19 lockdown has provided a great opportunity to assess the impact of human activities on coastal marine ecosystems. The current study assessed the concentration of the metals in water samples of the largest brackish water lagoon of Asia; the Chilika lagoon in the state of Odisha, India between pre-COVID-19 and post-COVID-19 lockdown scenarios. Monthly water samples (n=30 stations) from 0.3 m depth were collected from three sectors of the lagoon seasonally; pre-monsoon, monsoon, and post-monsoon. In addition to various physical parameters [pH, salinity, alkalinity, (DO) dissolved oxygen, (TDS) total dissolved solids, and (EC) electrical conductivity] the collected water samples were analysed for 18 trace metals (Al, As, Ba, Be, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Sr, Th, Tl, U, V). Most of the physical parameters showed a significant variation between pre-and post-COVID-19 scenarios, except for pH and DO. The concentration of five metals (Be, Cd, Co, Ni, and Pb) remained below detection limits in all water samples. The impact of COVID-19 lockdown on the concentration of the metal in the water samples was noticed along with the three sectors of the lagoon. However, eight metals (Al, As, Cr, Fe, Mn, Th, U, and V) were significantly different between the COVID-19 scenarios and the remaining five metals were not statistically significant. The mean concentration of Al, As, Fe, Th, and V were higher in the pre-COVID-19 scenarios, whereas only Cr and Mn were higher in the post-COVID-19 scenarios. The mean concentration of U was similar among both COVID-19 scenarios, even though there were seasonal and sectoral differences. The seasonal influence of riverine influx was more evident on metal concentration during the monsoon season, whereas the difference between sectors was more prominent during the post-monsoon season. An increased number of correlations between physical parameters and metal concentration were observed in the post-monsoon season and post-COVID-19 scenario. This study provides evidence that the imposition of COVID-19 lockdown reduced metal influx in the water column and improved the water quality of the Chilika lagoon. Our results can be used as baseline for metal concentration in surface waters of the lagoon.

Lamellar eutectic structure of Al_0.7CoCrFeNi high-entropy alloy (HEA) is emerging as a promising candidate for structural applications because of its high strength-ductility combination. The alloy consists of a fine-scale lamellar fcc+B2 microstructure with high flow stresses >1500 MPa under quasi-static conditions. The response to shear loading was not investigated so far. This is the first report on the shear deformation of an eutectic structured HEA and effect of precipitation on shear deformation. The dynamic shear response (DSR) of the eutectic HEA was examined in two microstructural conditions, with and without the presence of L1₂ precipitates. A split-Hopkinson pressure bar (SHPB) was used to compress the hat-shaped specimens to study the local DSR of the alloy. The adiabatic shear bands (ASBs) in two different microstructural conditions were characterized after deformation at dynamic strain rates. The adiabatic shear localization occurs at low strains for the high strength material, and the eutectic microstructure does not delay cracking. The width of ASBs and the extent of plastic deformation around them has been correlated with the rate of straining. Dynamic recrystallization within ASBs and profuse twinning around it was observed. Local mechanical response of individual lamellae before and after shear deformation was examined using nano-indentation.

Social media has revolutionized the way we communicate and interact with each other. While it has brought many benefits, it has also presented many ethical challenges. Social media platforms have access to an enormous amount of personal data, and there are concerns about how this data is being stored, collected, and used. Users often need to fully understand the risks of sharing sensitive information. Social media platforms have made it easy for fake news to spread rapidly, which can be dangerous and have serious consequences. Misinformation and propaganda can influence people's decisions and beliefs. In this paper, we will analyze the issues and challenges that may arise, and it will be necessary for individuals and society to address these challenges ethically and responsibly.

Debris-covered glaciers are a notable feature in the greater Himalaya, and their ongoing mass loss under changing climate will affect the water resources of over a billion people. The current knowledge of the mass balance of Himalayan glaciers is restricted by the paucity of in-situ measurements of glaciers in both space and time, as well as the resolution of satellite remote sensing imageries. Recently, the use of Unmanned Aerial System (UAS) imagery has shown the potential to bridge this gap by enabling very detailed monitoring of inaccessible glacial areas. UAS imagery-based monitoring of Himalayan glaciers has so far been limited to a single glacier in the entire Himalaya, providing a limited understanding of spatial variability in glacier mass balance and driving factors. In the first UAS based glacial mass change estimation in the trans-Himalaya, we conducted two Unmanned Aerial System (UAS) surveys (May and November 2019) over the debris-covered Annapurna III glacier in the Himalaya. We performed Structure-from-Motion (SfM) analysis and utilized differential GPS field observations to derive geometrically accurate point clouds, ortho-mosaics and digital surface models (DSMs). The glacial volumetric loss was estimated from DSM differencing, and the magnitude and spatial variability of glacier surface change was derived from 3-D differencing of point clouds. Results revealed a heterogeneous glacial melt pattern, with an average elevation loss of 0.89 m during the monitored time period. The majority of the glacial tongue exhibited surface lowering except the area above and around the glacial snout that surprisingly exhibited significant elevation gain. Both the highest magnitude of mass loss and the highest spatial variability in mass change was observed in areas with exposed ice-cliffs and supraglacial ponds. Glacial surface velocity derived from manual feature tracking showed velocity ranging from 0-4.1 m. A detailed evaluation of specific areas allowed an improved understanding of the complex interplay of factors leading to observed surface change. Our findings expand the extent of UAS based monitoring of debris-covered glaciers in the Himalaya and conclude that UAS derived 3D topographic products will become increasingly important for monitoring of thinning debris-covered glaciers.

Accurately quantifying the above-ground volume (AGV) and thus above-ground biomass (AGB) of forest stands is an important aspect in the conservation of mangrove ecosystem owing to their ecological and economic benefits. However, the number of studies focusing on quantifying mangrove forests’ biomass has been relatively low due to their marshy terrain, making exploratory studies challenging. In recent times, the use of LiDAR technologies in forest inventory studies has become increasingly popular, due to the reliability of LiDAR as a highly accurate means of 3D spatial data acquisition. In this study, we propose an end-to-end methodology for estimating AGV of mangrove forest stands from terrestrial LiDAR data. Many of the recent studies on this topic effectively employ machine learning algorithms such as multi layer perceptron, random forests, etc. for filtering foliage in the point cloud data of single trees. This study further extends that approach by incorporating the impact of class imbalance of forest point cloud data in a weighted random forest classifier. For the task of segmentation of wood/foliage points in a single tree point cloud, this approach yielded an average increase of 2.737% in the balanced accuracy score, 0.007 in the Cohen’s kappa score, 2.745% in the ROC AUC score and 0.857% in the F1 score. For the task of AGV estimation of a single tree, this approach resulted in an average coefficient of determination of 0.93 with respect to the ground truth volumes. For the task of counting pneumatophores in a plot-level point cloud, the proposed breadth-first searching method yielded an average coefficient of determination of 0.9391. Also, the machine learning classifier and geometric features used in this study were invariant to tree species and hence could be generalised for the classification of point clouds of other tree species as well. Finally, a breadth-first graph-search segmentation based approach is also proposed as part of this pipeline to estimate the contribution of pneumatophores to the AGB of mangrove forest stands. Since pneumatophores are a special adaptation of mangrove forests for gaseous exchange in marshy environments, this study aims to incorporate the detection and AGB estimation of pneumatophores in the inventory of mangrove forest stands. Studying the contribution of pneumatophores to the AGB of mangrove forest plots could also aid future mangrove forest inventory studies in modeling the underlying root network and estimating the below-ground biomass of mangrove trees.

This research paper examines the role of mass media in fostering positivity for the purpose of nation building. The mass media, including television, radio, print, and online platforms, holds significant influence over public opinion and societal attitudes. However, in recent years, there has been a growing concern about the predominance of negative news and content, which can have detrimental effects on the overall well-being of individuals and the development of a cohesive society. This study explores strategies and approaches to enhance positivity in mass media for the betterment of nations. It investigates the potential benefits, challenges, and ethical considerations associated with promoting positivity through various media channels. This paper provides recommendations for media organizations, policymakers, and society at large to cultivate a more positive media landscape that contributes to nation building.

Artificial Intelligence (AI) is used in our day-to-day life. AI for journalism is a reality. Just like other vital aspects of our life, AI has also entered the world of journalism. Many reputed news organizations have adopted AI in journalism to perform various newsroom tasks. In today’s digital world, several technologies are powering journalism. One such technology that is transforming the journalism field is artificial intelligence. Accuracy is a core value of journalism. With AI and machine learning systems, there’s a statistical element of uncertainty which means it’s impossible to guarantee 100 percent accuracy. AI tools such as OpenAI’s ChatGPT, Microsoft’s Bing chatbot, and Google’s Bard have been subject to debate now. AI tools have the potential to assist in a variety of tasks, such as scraping PDF files, writing code, and translating languages. AI can be a helpful tool for journalism students and media researchers. A main concern among computational journalists is that AI sometimes hallucinates data. This review paper highlights how artificial intelligence can help journalists.

Two histamine receptor subtypes (HR), namely H1R and H4R, as key components, are involved in the transmission of histamine-induced itch. Although exact downstream signaling mechanisms are still elusive, transient receptor potential (TRP) ion channels play important roles in the sensation of histaminergic and non-histaminergic itch. Aim of this study was to investigate the involvement of TRPV1 and TRPA1 channels in the transmission of histaminergic itch. The potential of TRPV1 and TRPA1 inhibitors to modulate H1R- and H4R-induced signal transmission was tested in a scratching assay in mice in vivo and in vitro via Ca2+ imaging of murine sensory dorsal root ganglia (DRG) neurons. The TRPV1 inhibition led to a reduction of H1R- and H4R- induced itch and reduced Ca2+ influx into the neurons. The TRPA1 inhibitor reduced H4R-induced itch and both H1R- and H4R-induced Ca2+ influx. In conclusion, these results indicate that both channels, TRPV1 and TRPA1 are involved in the transmission of histamine-induced pruritus.

This research paper aims to critically review the state of spiritual journalism in India. Spiritual journalism is a niche form of journalism that focuses on exploring and reporting on spiritual and religious topics, practices, and perspectives. In India, a country with a rich spiritual heritage and diverse religious traditions, spiritual journalism plays a significant role in shaping public discourse and understanding of spirituality. This paper examines the strengths and weaknesses of spiritual journalism in India, exploring its impact on society, its challenges, and the ethical considerations associated with its practice. By providing a critical analysis of the current state of spiritual journalism in India, this paper aims to shed light on its role, relevance, and potential for improvement.

The advent of the digital age has brought about significant transformations in the entertainment industry, challenging traditional paradigms and redefining the ways in which content is created, distributed, and consumed. This research paper critically reviews the paradigm shift occurring in the entertainment industry, focusing on the implications of digital technologies, the rise of online platforms, changing consumer behavior, and the impact on various stakeholders. By analyzing relevant literature, industry reports, and case studies, this paper aims to comprehensively understand the challenges and opportunities presented by the digital age and assess its impact on the entertainment industry.

This research paper explores the transformative potential of immersive media, specifically virtual reality (VR), in enhancing empathy among users. Empathy is vital in fostering understanding, compassion, and social cohesion. Immersive media, with its ability to transport individuals into simulated environments and perspectives, offers unique opportunities to bridge the empathy gap. This paper examines how VR can boost empathy, including perspective-taking, emotional connection, experiential learning, breaking down barriers, and empathy-building simulations. It discusses existing studies and empirical evidence supporting the effectiveness of VR in promoting empathy. The paper acknowledges the ethical considerations and challenges associated with using VR for empathy enhancement, such as avoiding stereotype reinforcement and ensuring inclusive design. By highlighting the potential of immersive media in cultivating empathy, this research paper contributes to the growing field of empathy research and provides insights for the development and application of VR experiences aimed at fostering empathy and understanding in diverse contexts.

There is a serious concern regarding framing rules and guidelines to regulate the content on OTT platforms that needs urgent attention. In the Current Scenario, the use of vulgar language in the public domain on OTT platforms needs to take seriously. Some OTT platforms heavenly use foul language, which is open to children that cause a huge psychological impact on them. The use of vulgar language, including profanity and bad words, has to be regulated strictly. Web series uses obscene, abusive words and foul language with excessive usage. This review paper highlights the excessive use of swear words, profane language, and vulgar expletives on OTT platforms.

Nucleosome positioning plays an important role in crucial biological processes like replication, transcription, and gene regulation. It has been widely used to predict the genome’s function and chromatin organisation. So far, the studies of patterns in nucleosome positioning have been limited to transcription start sites, CTCFs binding sites, and some promoter and loci regions. The genome-wide organisational pattern remains unknown. We have developed a theoretical model to coarse-grain nucleosome positioning data in order to obtain patterns in their distribution. Using hierarchical clustering on the auto-correlation function of this coarse-grained nucleosome positioning data, a genome-wide clustering is obtained for Candida albicans. The clustering shows the existence beyond hetero- and eu-chromatin inside the chromosomes.

We used population reconstruction techniques to assess for the first time the population dynamics of a seagrass, Cymodocea nodosa, exposed to long-term elevated CO₂ near three volcanic seeps and compare them with reference sites away from the seeps. Under high CO₂, the density of shoots and of individuals (apical shoots), and the vertical and horizontal elongation and production rates, were higher. Nitrogen effects on rhizome elongation and production rates and on biomass, were stronger than CO₂ as these were highest at the location where the availability of nitrogen was highest. At the seep where the availability of CO₂ was highest and nitrogen lowest, density of shoots and individuals were highest, probably due to CO₂ effects on shoot differentiation and induced reproductive output, respectively. In all three seeps there was higher short- and long-term recruitment and growth rates around zero, indicating that elevated CO₂ increases the turnover of C. nodosa shoots.

Mortality due to suicide is amongst the largest public health concerns across the world today and in Bharat (India). There have been concerns that the COVID-19 pandemic has contributed to worsening mental health outcomes across the world, and in Bharat. Furthermore, long COVID has been proposed to be a major consequence of COVID-19, which can also worsen mental health outcomes. Therefore, our objective in this study was to analyse trends in suicide mortality across Bharat, and to compare these trends to changes prior to the COVID-19 pandemic; as well, we aimed to analyse if long COVID had any role in these changes. It was found that, at a national level, the average annual increase of the suicide rate between 2019 and 2022 was 0.7 per 100,000 people (6.41% increase)., There was also an average annual rise in suicide rates across 27 states/union territories (out of the 33 that were analysed). States/UTs with the highest annual increases since the start of the COVID-19, despite a decrease from 2018 to 2019, were Tamil Nadu (increase by 2.7; 15.17% increase), and Telangana (increase by 1.9; 9.22% increase), Multi-linear regression had shown that the annual suicide rate changes were not associated with COVID-19 deaths per 10,000 people (standardized beta coefficient = 0.077; p = 0.605) but were associated with COVID cases per 100 people (standardized beta coefficient = 0.578; p

Epitranscriptomic RNA modifications play a crucial role in the posttranscriptional regulation of gene expression. N6-methyladenosine (m6A) is the most prevalent internal modification of eukaryotic RNA and plays a pivotal role in RNA fate. RNA m6A modification is regulated by a group of cellular proteins, methyltransferases (writers) and demethylases (erasers), which add and remove the methyl group from adenosine, respectively. m6A modification is recognized by a group of cellular RNA-binding proteins (readers) that specifically bind to m6A-modified RNA, mediating effects on RNA stability, splicing, transport, and translation. The functional significance of m6A modification of viral and cellular RNA is an active area of virology research. In this review, we summarize and analyze current literature on m6A modification of HIV-1 RNA, the multifaceted functions of m6A in regulating HIV-1 replication, and the role of viral RNA m6A modification in evading the innate immune responses to infection. Furthermore, we briefly discuss future directions and therapeutic implications of mechanistic studies of HIV-1 epitranscriptomic modifications.

The thermal degradation behaviour of 10:90 and 90:10 blends of Polyethylene Terephthalate (PET) and petroleum coke has been investigated using mechanical alloying (milling) at 300 rpm and for periods up to 1-10 hours. Milled specimens were characterised using SEM and x-ray diffraction; their thermal degradation behaviour was investigated using thermo-gravimetric analyser (TGA) for temperatures up to 1200°C. Whereas PET specimens showed a tendency towards flattening out and increased surface area during collisions in ball mills, petroleum coke particles tended to break down into smaller particles. 10:90 and 90:10 blends of PET and coke showed significant microstructural evolution with increasing speeds and time including fracture, strain hardening and re-welding. X-ray diffraction results showed clear evidence for increasing amorphous component in petroleum coke without much influence on PET crystallinity. Thermo-gravimetric results showed a significant increase in the overall degradation and much higher weight losses associated with mechanical alloying. This study has shown that mechanical alloying could be used to modify the degradation behaviour of coke/plastic blends and corresponding yield during pyrolysis with implications for plastic waste management.

Multiple Sclerosis (MS) is a complex disease of the central nervous system (CNS) that involves the intricate interplay of different immune cells going awry leading to inflammation, demyelination, and neurodegeneration. Its diagnosis is quite arduous because of the baffling number of symptoms it elicits and the varied clinical manifestation it presents. The simplified criteria (in form of Macdonald’s Criteria) which have got modified several times is now the single most important criteria accepted by neurology bodies for diagnosing MS. Biomarkers from time to time have been explored to simplify the diagnosis and prognosticate MS along with anecessity to monitor treatment outcome. In recent years, research on biomarkers has advanced rapidly due to their ability to be easily and rapidly measured, their specificity, safety, and their ability to yield precise results. Biomarkers are classified into various categories including predictive, diagnostic, prognostic, related to disease activity, and monitoring treatment outcome. Each representative of the disease activity category reflects a variety of pathological processes of MS such as neuroaxonal loss, gliosis, demyelination, disability progression, remyelination, etc. This review discusses several promising serum and cerebrospinal fluid biomarkers and imaging biomarkers used in clinical practice. Myelin oligodendrocyte glycoprotein antibody disease which is recently recognized as a definite disease will also be discussed. Furthermore, it sheds light on the criteria and the challenges a biomarker faces to be considered as a standard one.

This paper investigates an Energy Neutral System using Micro Energy Harvesters for a Health Monitoring Wireless Sensor Node (HM-WSN). We have implemented HM-WSN consisting of a solar cell energy harvester, a Power Management Unit (PMU) and the ucontroller, sensor and transmitter acting as load. A battery extender and a switching logic circuit for sensor node is designed to evaluate the efficiency of the proposed system. The HM-WSN senses body temperature with improvement in lifetime of coincell. The HM-WSN is built using commercially available off the shelf (COTS components and consumes 47.2uW for data being updated every 134s. It can be operated for approximately 1.32 years only on a coincell. Furthermore, the HM-WSN can be operated with solar energy at 200lux, achieving 96.36 years with a combination of a coincell with an additional capacitor of 2.2mF. It attains 4.07 years to 16.87 years lifetime with the load capacitor varying from 1mF to 1.5mF at 350lux lighting condition. With the same ambient condition and a 2mF load capacitor, HM-WSN attains complete energy autonomy.

In a limestone quarry mine, fragmentation is a crucial outcome of blasting operations. The optimization of blasting operations greatly benefits from the prediction of rock fragmentation. The main factors that affect fragmentation are rock mass characteristics, blast geometry, and explosive properties. This paper is a step towards the implementation of machine learning and deep learning algorithms for predicting the extent of fragmentation (in percentage) in opencast mining. Various parameters can affect fragmentation. But, in this paper initially, ten parameters (spacing, drill hole diameter, burden, average bench height, powder factor, number of holes, charge per delay, uniaxial compressive strength, specific drilling, and stemming) are collected to train the model. However, due to a weak correlation with rock fragmentation, drill diameter, Average bench height, compressive strength, stemming, and charge per delay are eliminated to reduce model complexity. A total of 219 data sets having five input features i.e., the number of holes, spacing, burden, specific drilling, and powder factor are used to develop the models. To predict rock fragmentation due to blasting in limestone quarry mines, both machine learning models (Random Forest Regression (Bagging), Support Vector Regression, and XG Boost Regression (Boosting)), as well as a deep learning model (Neural Network Regression), are applied to develop a model that can optimize the prediction of fragmentation. The Artificial neural network model optimization showed that the model with architecture 64-32-16-1 can perform well giving MSE (mean squared error) values of 41.32 and 28.59 on training and test data respectively. The R2 value for both training and test is 0.83. Random Forest regression is also performing well compared to SVR and XG boost with the MSE value 12.37 and 9.89 on training and testing data respectively. Here, the R2 value for both sets are 94%. Based on the permutation importance and Shapely plot values, the powder factor has the highest impact, and the burden has the lowest impact on fragmentation.

Background: The novel coronavirus (COVID-19) infection is primarily transmitted through respiratory droplets from an infected person and contact with tainted surfaces or items. Social distancing became the primary measure of preventing the spread of COVID-19, with the principal aim being to reduce the probability of contact with an already infected person. Social distancing can be distressing, as it is against the community's way of life. Saudi Arabia imposed a curfew and suspended all religious, entertainment, sporting, and mass congregations. The daily updates on COVID-19 infection and mortality are upsetting and further, aggravate depression and anxiety. With this background, this study was planned with the following objectives. To determine the sociodemographic profile of the study participants, to find the prevalence of psychological morbidity, and to measure the association between the sociodemographic details, COVID-19 associated factors, and psychological effects among Abha citizens during the COVID-19 pandemic. Methodology: A descriptive cross-sectional community-based study was conducted in the Abha city population from August 2021 to July 22. This study followed snowball sampling, the data was collected using an online Google form the link was shared in WhatsApp groups and through emails to contacts, asking friends to share it with their friends, until reaching the adequate sample size the responses were accepted. Results: A total of 530 participated, and their age ranged from 19 -70 years. Many of the participants (34.5%, n=183) belonged to 36-45 years old. Most of the responders were 69.8% married and Females (69.2%, n=367). Half of the participants had been quarantined (49.6%), and 51.5% were scared from fear of COVID-19. 64.8% of the participants had depression; 14.2%, 20.8%, 13.6%, and 16.2% had mild, moderate, severe, and extremely severe depression, respectively. Around 58.2% of participants suffered from anxiety; 5.8% experienced mild anxiety, 21.7% moderate anxiety, and 30.7% severe anxiety. The proportion of stress among the participants was 45.0%; 10.8% had mild stress, 9.4% had moderate stress, and 24.5% had severe to extremely severe stress. Conclusions: COVID-19 poses mental health problems among individuals and communities. There is a need to find the more susceptible individuals for mental health issues or other psychological disorders. Mental health and psychological problems can be resolved with health education, counseling, and appropriate interventions to curb the negative health impacts of COVID-19.

The concept of omics-based technological approaches has promoted translational research by integrating knowledge from diverse areas to understand their dynamics by exploring the molecular mechanisms underlying various processes paving the way for further improvements in the crops quality by providing sound knowledge on controlling plant diseases. This area is not profoundly investigated a decade back and hence this knowledge has become exceedingly important in modern times as it has got potential for being utilized in crop improvement programs. In this review, the contributions of different omics technologies including genomics, transcriptomics, proteomics, and metabolomics in understanding and materializing the ways involved in the plant pathogen interaction (PPI) is discussed. Furthermore, opportunities, challenges, and perspectives of omics linked to signaling mechanisms have also been highlighted that are significantly linked to plant-microbe interactions.

Infection by the Severe Acute Respiratory Syndrome-Coronavirus-2 (SARS-CoV-2) results in the novel coronavirus disease COVID-19, which has posed a serious threat globally. Infection of SARS-CoV-2 during pregnancy is associated with complications like preterm labor and premature rupture of membranes; a proportion of neonates born to the infected mothers are also positive for the virus. During pregnancy, the placental barrier protects the fetus from pathogens and ensures healthy development. However, whether or not SARS-CoV-2 can infect the placenta is unknown. Herein, utilizing single-cell RNA-seq data, we report that the SARS-CoV-2 binding receptor ACE2 and the S protein priming protease TMPRSS2 are co-expressed by a subset of syncytiotrophoblasts (STB) in the first trimester and extra villous trophoblasts (EVT) in the second trimester human placenta. The ACE2- and TMPRSS2-positive (ACE2+TMPRSS2+) placental subsets express mRNA for proteins involved in viral budding and replication. These cells also express mRNA for proteins that interact with SARS-CoV-2 structural and non-structural proteins in the host cells. We also discovered unique signatures of genes in ACE2+TMPRSS2+ STBs and EVTs. The ACE2+TMPRSS2+ STBs are highly differentiated cells and express genes involved mitochondrial metabolism and glucose transport. The second trimester ACE2+TMPRSS2+ EVTs are enriched for markers of endovascular trophoblasts. Further, both these subtypes abundantly expressed genes in Toll like receptor pathway, the second trimester EVTs (but not first trimester STBs) are also enriched for component of the JAK-STAT pathway that drive inflammation. To conclude, herein we uncovered the cellular targets for SARS-CoV-2 entry and show that these cells can potentially drive viremia in the developing human placenta. Our results provide a basic framework towards understanding the paraphernalia involved in SARS-CoV-2 infections in pregnancy.

As of not long ago, understanding the administrative conduct of cells has been sought after through autonomous investigation of the transcriptome or the proteome. In view of the focal creed, it was commonly accepted that there exist an immediate correspondence between mRNA records and produced protein articulations. In any case, late examinations have demonstrated that the relationship among's mRNA and Protein articulations can be low because of different factors, for example, unique half lives and post record apparatus. In this manner, a joint investigation of the transcriptomic and proteomic information can give valuable experiences that may not be translated from singular examination of mRNA or protein articulations. This article audits the current significant methodologies for joint investigation of transcriptomic and proteomic information. We order the various methodologies into eight primary classes dependent on the underlying calculation and last investigation objective. We further present analogies with different spaces and talk about the current exploration issues around there.

This article presents an Internet of Things (IoT)-enabled system meticulously engineered for comprehensive environmental assessment, encompassing air quality, temperature, and humidity. Simultaneously, the devised system integrates cutting-edge MQ6 sensors, adept at detecting ambient gases, with a primary focus on monitoring Liquefied Petroleum Gas (LPG) and Butane gases concentrations in the atmosphere. This distinctive feature not only facilitates the identifi-cation of hazardous gases leakages, particularly common in household LPG usage, but also empowers preemptive measures. The environmental parameters, air quality, temperature, and humidity, are precisely gauged through the utilization of MQ135 and DHT11 sensors. The con-trolling and managing of the hardware component of the system (i.e., device) is assured by an Arduino UNO, that orchestrates the collection of sensor data, transmitting it seamlessly to both the ThingSpeak cloud and a Convolutional Neural Network (CNN) model. By interfacing with ThingSpeak, the device ensures the systematic storage and visualization of environmental data, streamlining monitoring and analysis processes. In the event of perilous gases detection, the system promptly triggers an alarm, concurrently dispatching a real-time notification to the device owner via the integrated If-This-Then-That (IFTTT) application programming interface (API). To further enrich environmental awareness, an embedded microphone captures audio recordings, subsequently processed by a CNN-based deep learning model. This model employs advanced techniques such as spectrogram generation, Convolution2D, and MaxPooling2D within a Se-quential Model architecture, to attain elevated levels of accuracy, furnishing insightful interpre-tations of ongoing activities within the environment.

The pressure on freshwater resources is leading to diminishing flows in some of the critical river systems across the globe and India is no exception and this is mainly because of water withdrawal for irrigation, which is often to the tune of 70% to 80% with some proportion for domestic and industrial use. While graduating from the concept of environmental flows and its assessment methodologies in India, the water-managers, the researchers and the conservationists are now moving towards answering the next question if the rivers are to be revived, then where will the water come from, especially in the case of over-allocated rivers, including the river Ganga. While the logical way is to look at the biggest user of water, i.e. irrigation, it remains to be seen whether the irrigation water savings will actually lead to enhancing flows in a river, complementing the efforts towards maintaining e-flows in rivers, or whether it will lead to more area under agriculture, bring changes in cropping patterns towards more water-intensive crops or result in something else. This is a growing debate across the globe, where India is no exception, and there has been a wide range of opinions in this regard. This paper discusses the process, findings and lessons from a joint initiative involving farmers, the Uttar Pradesh state Irrigation and Water Resources Department, Bijnor District Administration and a conservation organisation to enhance flows in a rivulet, called karula River, which is part of the Ganga river system.

In this research, the application of the Physics-Informed Neural Network (PINN) model is explored to solve transport equation-based Partial Differential Equations (PDEs). The primary objective is to analyze the impact of different activation functions incorporated within the PINN model on its predictive performance, specifically assessing the Mean Squared Error (MSE) and Mean Absolute Error (MAE). The dataset used in the study consists of a varied set of input parameters related to strut diameter, unit cell size, and the corresponding yield stress values. Through this investigation, the aim is to understand the effectiveness of the PINN model and the significance of choosing appropriate activation functions for solving complex PDEs in real-world applications. The outcomes suggest that the choice of activation function may have minimal influence on the model's predictive accuracy for this particular problem. The PINN model showcases exceptional generalization capabilities, indicating its capacity to avoid overfitting with the provided dataset. The research underscores the importance of striking a balance between performance and computational efficiency while selecting an activation function for specific real-world applications. These valuable findings contribute to advancing the understanding and potential adoption of PINN as an effective tool for solving challenging PDEs in diverse scientific and engineering domains.

Viruses are silent enemies that intrude and take control of the plant cell's machinery for their own multiplication. Infection by viruses and the resulting damage is still a major challenge in the agriculture sector. Plants have the ability to fight back, but the ability of viruses to counteract and mutate at a fast rate helps them to hide from the host response. Therefore, classical approaches for introgressing resistance genes by breeding have obtained limited success in counteracting the virus menace. Genetic modification (GM) based strategies have been successful in engineering artificial resistance in plants. Several different approaches based on pathogen derived resistance, antisense constructs, hairpin RNA, double stranded RNA etc. have been used to enhance plant resistance to the virus. Recently, genome editing (GE) strategies mainly involving the CRISPR/Cas mediated modifications are being used for virus control. In this review, we discuss the developments and advancements in the GM and GE based methods in tackling virus infection in plants.

Biosynthetic gene clusters are specific genomic regions in microorganisms, like bacteria and fungi, responsible for producing bioactive compounds. Identifying these clusters is complex due to their diverse nature. This research presents a comprehensive approach to effective BGC identification. The study focuses on five classes of Natural Products: PKS , NRPS, RiPP, Terpenes, and Hybrid PKS-NRPS. Data was gathered from the MiBIG database in GBK format. Protein sequences from each file were extracted, and sequences under the same BGC ID were combined. Physicochemical properties were calculated, and sequence embeddings were generated using NLP techniques like CountVec, TFIDF, and Word2Vec specific to each NP class. An integrated feature matrix was created by merging physicochemical properties and generated embeddings. This matrix was used for training and testing of nine ML models such SVM, RF and many more. The study explored data balancing techniques with and without SMOTE and employed Grid Search for parameter optimization. This led to six datasets and 54 models. The LR model, using TFIDF with SMOTE, emerged as the most effective, achieving an accuracy of 0.96, AUC of 0.9912, and other strong metrics. This method enhances BGC identification for drug development, offering a broader understanding of their applications in medicine and biotechnology.

Suppressors of cytokine signaling (SOCS) influence cytokine and growth factor signaling by negatively regulating the JAK-STAT pathway. This maintains homeostasis during host immune response. However, functional characterization of SOCS family members in invertebrates is limited. In this study, we discovered the Type-I subfamily of the SOCS genes in the mealworm beetle, T. molitor. The full-length ORFs of TmSOCS5, TmSOCS6, and TmSOCS7 consisted of 1,389, 897 and 1,458 nucleotides, encoding polypeptides of 462, 297 and 485 amino acids, respectively, The C-terminal region of TmSOCS was highly conserved in the SH2 and SOCS box domains. Phylogenetic analysis revealed that the three SOCS genes clustered within the same sub-family and the highest amino acid identity was with the Tribolium castaneum SOCS genes (TcSOCS). While the expression of TmSOCS5 and TmSOCS6 was low in larval, pupal, and adult stages of the insect, TmSOCS7 showed higher expression. The expression of TmSOCS5 and TmSOCS6 was higher in larval hemocytes and adult ovary. The microbes expressed the three TmSOCS genes to varying degrees. C. albicans elicited the strongest response in the host with highest 15-fold expression in TmSOCS7 3 h post-inoculation. Collectively, these data suggest that the Type I TmSOCS could play a role in eliciting host immunity.

Diabetic wound (DW) is the most devastating complication resulting in significant mortality and morbidity in diabetic patients. Although the pathophysiology of DWs is multifaceted, evidence revealed that prolonged inflammation with infections, extracellular matrix (ECM) degradation and unnecessary NETosis impair DW healing. This theoretical problem commands the necessity of developing a novel strategy focused on targeting the 'specific' molecular modalities of DW. The primary culprits, matrix metalloproteinase (MMP)-9 and protein kinase C (PKC)-βII, are responsible for impaired angiogenesis, NETosis, and ECM degradation. Thus, there is reinvigorated interest in identifying selective inhibitors for the effective management of DW. The current study exemplified human β-defensin-2 (HBD-2), a biological macromolecule as a dual-inhibitor of MMP-9 and PKC-βII using protein-protein docking and molecular dynamics simulation studies. Residue-residue interactions and binding affinity were investigated using Z-dock. Chemical bonding behavioral changes, structural dynamics, and functional changes were determined using GROMACS by analyzing RMSD, ROG, RMSF, SASA, FEL, and PCA. Overall, the data analysis revealed that HBD-2 possesses strong binding affinity and stability against MMP-9 and PKC-βII, which can be an ideal therapeutic for the accelerated healing of DW. The study provides valuable insights into the molecular mechanisms underlying hBD-2's potential therapeutic effects, offering new avenues for the development of innovative treatment strategies. The clinical relevance of our findings lies in their potential to inform the development of new approaches for diabetic wound management, addressing a significant healthcare concern.

We attempted to understand the cervical cancer patient samples through Whole Exome Sequencing. We derived the variants from raw reads via our in-house benchmarked pipeline and validated the variants by IGV. This is the first cervical cancer exome data from the Indian cohort. Background: Cervical cancer (CC) is caused mainly by persistent infections of high-risk HPV, reduced parity, and factors like a decrease in average socioeconomic levels. We keep this because no cervical cancer exome data is available from the Indian cohort. Methods: The CC patient clinical samples were initially subjected to preparation using Qiagen DNA extraction, quantified, and the library preparation using the Agilent target enrichment system. Further, exome capture by Illumina platform (100X), quality check, alignment, and variant calling followed by the downstream analysis and finally visualized by IGV. Results: We observed a large number of SNVs or mutations from an Indian perspective, such as KMT2C, OR4M1, PDPR2P, EPHB1, FAS, OPCML, MGST1, C1QTNF9, HS6ST3, OR4K2, PRPSAP2, KCNJ12, FIGNL1, SFXN1, BAGE2, ARVCF, NAMPT variants of significance, unknown significance and possibly significant are reported. Conclusion: For the first time, KMT2C is observed as a novel potent mutation and pathogenic, showing the variant position at (7:152265091, T>A, SNV 62478356) from the Indian context in CC. Further, we visualized and validated the mutations using the Integrative Genomic Viewer (IGV) browser. Finally, we discuss the inherent challenges through KMT2C mutations.

Food security has become a major concern worldwide in recent years due to ever increasing population. Providing food for the growing billions without disturbing environmental balance is incessantly required in the current scenario. In view of this, sustainable modes of agricultural practices offer better promise and hence are gaining prominence recently. Moreover, these methods have taken precedence currently over chemical-based methods of pest restriction and pathogen control. Adoption of Biological Control is one such crucial technique that is currently in the forefront. Over a period of time, various biocontrol strategies have been experimented with and some have exhibited great success and promise. This review highlights the different methods of plant-pathogen control, types of plant pathogens, their modus operandi and various biocontrol approaches employing a range of microorganisms and their byproducts. The study lays emphasis on the use of upcoming methodologies like microbiome management and engineering, phage cocktails, genetically modified biocontrol agents and microbial volatilome as available strategies to sustainable agricultural practices. More importantly, a critical analysis of the various methods enumerated in the paper indicates the need to amalgamate these techniques in order to improve the degree of biocontrol offered by them.

Novel coronavirus disease (COVID-19) has affected nearly 7 million individuals and claimed more than 0.4 million lives to date. There are several reports of gender differences related to infection and death due to COVID-19. This raises important questions such as “Whether there are differences based on gender in risk and severity of infection or mortality rate?” and “What are the biological explanation and mechanisms underlying these differences?” Emerging evidence has proposed sex-based immunological, genetic, and hormonal differences to explain this ambiguity. Besides biological differences, women have also faced social inequities and economic hardships due to this pandemic. Several recent studies have shown that independent of age males are at higher risk for severity and mortality in COVID-19 patients. Although susceptibility to SARS-CoV-2 was found to be similar across both genders in several disease cohorts, a disproportionate death ratio in men can be partly explained by the higher burden of pre-existing diseases and occupational exposures among men. From an immunological point of view, females can engage a more active immune response, which may protect them and counter infectious diseases as compared to men. This attribute of better immune responses towards pathogens is thought to be due to high estrogen levels in females. Here we review the current knowledge about sex differences in susceptibility, the severity of infection and mortality, host immune responses, and the role of sex hormones in COVID-19 disease.

The integration of diverse distributed generation (DG) units, encompassing both Renewable Energy Sources (RES) and non-RES technologies delves into voltage levels, current distributions, and power flows, aiming to optimize and effectively manage the distribution network. An RES-based DGs such as photovoltaic systems and wind turbines, alongside non-RES units like fuel cells and micro turbines. This study proposes a hybrid approach the Multi-Objective Genetic Algorithm - Grey Wolf Optimizer (MOGA-GWO). By merging the strengths of multi-objective genetic algorithms with the efficiency of the Grey Wolf Optimizer, this advanced algorithm seeks semi-optimal solutions for multi-objective optimization problems. The algorithm aims to improve convergence speed without compromising solution quality, offering a promising solution for optimizing the characteristics of DG and RES integration in distribution networks compared to Cuckoo Search and Simulation Annealing Techniques. Key algorithmic operations include individual representation, initialization, fitness function computation, selection, crossover, mutation, and ending conditions. The DG optimal power flow problem is explored with a focus on minimizing generation costs, improving voltage profiles, minimizing losses, enhancing reliability, integrating renewable energy, reducing environmental impact, managing congestion, and ensuring compliance with operational constraints. Beyond traditional considerations, the study emphasizes neglected objectives and constraints, such as cyber-security concerns, real-time operation, regulatory frameworks, social acceptance, lifecycle environmental impact, grid resilience, data privacy, aging infrastructure compatibility, and economic viability.

In this paper, we present a relapse based demonstrating way to deal with investigate various arrangement MTC information. A commonplace use of this displaying approach incorporates three stages: first, define a model that approximates the connection between quality articulation and trial factors, with boundaries consolidated to address the exploration premium; second, utilize least-squares and assessing condition methods to gauge boundaries and their relating standard blunders; third, register test insights, P-qualities and NFD as proportions of factual criticalness. The benefits of this methodology are as per the following. To begin with, it tends to the exploration interest in a particular, precise way, and maximally uses all the information and other important data. Second, it represents both orderly and irregular varieties related with the information, and the consequences of such examination give not just quality explicit data applicable to the exploration objective, yet additionally its dependability, in this way helping agents to settle on better choices for subsequent investigations. Third, this methodology is truly adaptable, and can undoubtedly be stretched out to different sorts of MTC considers or other microarray explores by detailing various models dependent on the test plan of the investigations.

The Voltammetric and polarographic methods are proposed to determine the short time corro-sion rates of brass in 1N HCl solution. It should be noted that it is also possible to determine the corrosion rates of each species present in the solution, simultaneously like Cu (II) and Zn (II) in brass. Samples extracted from bark of Babul (ESBB) is used as corrosion inhibitors. The corrosion inhibition efficiency is 96% at 24h after the test started. These results are compared with the av-erage corrosion rates obtained by using gravimetric (PIT) and some electrochemical methods i.e. galvanostatic and potentiodynamic polarization measurements.

Polyhedral oligomeric silsesquioxane (POSS) is a suitable nanoscale reinforcement for thermosetting polymers, such as epoxy resin systems in order to modify its mechanical, thermal, and chemical properties. The inclusion of POSS in the epoxy resin at higher loading (greater than 1 wt.%), however, introduces the ductility during the fracture behavior of these nanocomposites. Consequently, the J-integral is used to quantify the fracture behavior of these materials and characterize the crack growth resistance curve against stable crack growth. A range of nanocomposites is prepared by adding 0.5, 1, 3, 5, and 8 wt.% of glycidyl POSS into DGEBF epoxy resin cured with an amine-based curing agent. From the fracture toughness experiment the load-displacement result confirms that when the POSS reinforcement is greater than 1 wt.%, the fracture behavior of the nanocomposite changes from brittle to ductile. For both brittle and ductile nanocomposites, the addition of POSS molecules improves the crack initiation toughness. The development of POSS–POSS compliant domains are reported previously, is attributed for this change in the failure behavior. The fractured images of POSS–epoxy nanocomposites, obtained using scanning electron microscopy, show that the increase in fracture resistance at higher values of POSS loading occurs due to the extensive shear yielding. Meanwhile, the increased fracture toughness at lower values of POSS loading occurs due to crack pinning and crack deflection.

Our brain continuously interacts with the body as we engage with the world. Although we are mostly unaware of internal bodily processes, such as our heartbeats, they may be influenced by and in turn influence our perception and emotional feelings. While there is a recent focus on understanding cardiac interoceptive activity and interaction with brain activity during emotion processing, the investigation of cardiac-brain interactions with more ecologically valid naturalistic emotional stimuli is still very limited. We also do not understand how an essential aspect of emotions like context familiarity influences affective feelings and is linked to cardiac-brain interactions. Hence to answer these questions, we designed an exploratory study by recording ECG and EEG signals for the emotional events while participants were watching emotional movie clips. Participants also rated their familiarity with the stimulus on the familiarity scale. Linear mixed effect modelling was performed in which the ECG power and familiarity were considered as predictors of EEG power. We focused on three brain regions, including prefrontal (PF), frontocentral (FC) and parietooccipital (PO). The analyses showed that cardiac-brain interaction is dependent on familiarity such that the interaction is stronger with high familiarity. In addition, the results indicate that arousal is predicted by cardiac-brain interaction, which also depends on familiarity. The results support emotional theories that emphasize context dependency and interoception. Multimodal studies with more realistic stimuli would further enable us to understand and predict different aspects of emotional experience.

This study aims to investigate the hydration and strength characteristics of green cementitious mortars with ultrahigh-volume limestone-calcined clay as well as two kinds of Class F fly ash. Using the ASTM C311 strength activity index test method, the effect of different pozzolan replacement levels of cement (0%, 20%, 50%, and 80%, by weight) were investigated. Compressive strength at 3, 7, 14, 28 and 90 days under standard curing was recorded, and hydration heat of the 20% and 80% replacement mixes was studied using iso-thermal calorimetry. It was observed that the effectiveness of the pozzolan in mortars depends on particle size distribution, glassy or amorphous nature, surface area and replacement level. The sum of all these effects can be captured by the strength activity test only if the standard recommended 20% pozzolan mix is substituted with the actual mix composition. The results in this study provide insights into the mix design and applications of ultrahigh-volume pozzolanic cementitious materials specifically made with limestone-calcined clay, and promote greener cement and concrete in construction industry.

This paper presents the use of Graph Neural Networks (GNNs) to predict the tensile strength of Fused Deposition Modeling (FDM) specimens. In the present work, there are four main input parameters i.e. Infill percentage, Layer height, Print speed and Extrusion temperature while the Tensile Strength is an output parameter were considered. This study includes use of central composite design based response surface methodology to finalize the experimental layout. 3D printed specimen were manufactured as per the ASTM E8 standard on FDM printer using Polylactic Acid (PLA) as filament. Micro-tensile test were performed on the printed specimen as per ASTM E8 standard. The GNN algorithm was trained on a dataset of FDM specimens, achieving a mean squared error (MSE) of 2.47, mean absolute error (MAE) of 1.14, and R-squared value of 0.78. An adjacency matrix, which shows the connections between nodes in a graph. The obtained plot for nodes and weights in a GNN provide valuable information about the model and its performance. The results show the potential of using GNNs in predicting the mechanical properties of additively manufactured specimens and provide a promising direction for further research in this field.

Natural products from plants such as, chemopreventive agents attract huge attention because of their low toxicity and high specificity. The rational drug design in combination with structure based modeling and rapid screening methods offer significant potential for identifying and developing lead anticancer molecules. Thus, the molecular docking method plays an important role in screening a large set of molecules based on their free binding energies and proposes structural hypotheses of how the molecules can inhibit the target. Several peptide based therapeutics have been developed to combat several health disorders including cancers, metabolic disorders, heart-related, and infectious diseases. Despite the discovery of hundreds of such therapeutic peptides however, only few peptide-based drugs have made it to the market. Moreover, until date the activities of cyclic peptides towards molecular targets such as protein kinases, proteases, and apoptosis related proteins have never been explored. In this study we explore the in silico kinase and protease inhibitor potentials of cyclosaplin as well as study the interactions of cyclosaplin with other cancer-related proteins. Previously, the structure of cyclosaplin was elucidated by molecular modeling associated with dynamics that was used in the current study. Docking studies showed strong affinity of cyclosaplin towards cancer-related proteins. The binding affinity closer to 10 indicated efficient binding. Cyclosaplin showed strong binding affinities towards protein kinases such as EGFR, VEGFR2, PKB and p38 indicating its potential role in protein kinase inhibition. Moreover, it displayed strong binding affinity to apoptosis related proteins and revealed the possible role of cyclosaplin in apoptotic cell death. The protein-ligand interactions using LigPlot displayed some similar interactions between cyclosaplin and peptide-based ligands especially in case of protein kinases and a few apoptosis related proteins. Thus, the in silico analyses gave an insight of cyclosaplin as a potential apoptosis inducer and protein kinase inhibitor.

Genetic engineering has become an essential element in developing climate-resilient crops and environmental sustainable solutions to respond to the increasing need for global food security. Genome editing using CRISPR/Cas [Clustered regulatory interspaced short palindromic repeat (CRISPR)-associated protein (Cas)] technology is being applied to a variety of organisms, including plants. This technique has become popular because of its high specificity, effectiveness, and low production cost. Therefore, this technology has the potential to revolutionize agriculture and contribute to global food security. Over the past few years, increasing efforts have been seen in its application in developing higher-yielding, nutrition rich, disease resistant, stress-tolerant “crops” fruits and vegetables. Cas proteins such as Cas9, Cas12, Cas13, and Cas14, among others, have distinct architectures and have been used to create new genetic tools that improve features that are important for agriculture. The versatility of Cas has accelerated genomic analysis and facilitated the use of CRISPR/Cas to manipulate and alter nucleic acid sequences in cells of different organisms. This review provides the evolution of CRISPR technology exploring its mechanisms and contrasting it with traditional breeding and transgenic approaches to improve different stress tolerance. We have also discussed the CRISPR/Cas system and explored three Cas proteins that are currently known to exist: Cas12, Cas13, and Cas14 and their potential to generate foreign DNA free or non-transgenic crops that could be easily regulated for commercialization in most countries.

In the recent past, there has been a rise in Prostate Cancer (PCa) in Asia, particularly India. Although systematic reviews on PCa have dealt on the genetics, genomics and the environmental influence in causal of PCa, no predictive analytics in comparing the PCa from Caucasian, American to Asian population was attempted. In this review article, we have attempted to elaborate this aspect of PCa and deliberated on challenges related to next generation sequencing methods of PCa’s manifestation when compared to the west.

Catheter-associated urinary tract infection (CAUTI) is one of the most common hospital-acquired infections (HAIs). Prolonged hospitalization, invasive devices such as catheters, and irrational use of antimicrobial agents are believed to be the major causes of high rates of HAIs. Infections such as pyelonephritis, urethritis, cystitis, and prostatitis are the main concern in catheterized ICU patients. In these cases, Gram-negative bacteria are the most common. The present study is undertaken to determine the frequency, antibiograms, disease pattern, and risk factors involved in providing an advocacy recommendation to prevent CAUTI. A total of 1078 patients were admitted to the hospital ICU, out of which healthcare-associated infection was reported in 316 patients. CAUTI was reported only in 70 patients. Klebsiella pneumoniae (20%) was the predominant isolate, with Serratia (3%) and Providencia (3%) species as the least common in this study. The present study provides CAUTI incidence rates in a tertiary care hospital in Hail, Saudi Arabia. Furthermore, information on risk factors of CAUTI common causative organism associated, and their antibiogram patterns are also presented. This study provides vital information that can be used to formulate an effective antibiotic stewardship program that can be implemented throughout the kingdom.

This paper presents an on-device semi-supervised human activity detection system that can learn and predict human activity patterns in real time. The proposed semi-supervised learning (SSL) framework uses sparsely labelled user activity events acquired from Inertial Measurement Unit (IMU) sensors installed as wearable device. The objective is to learn classification of multiple classes of human activities in real-time. The proposed cluster-based learning model in this approach is trained with data from the same target user, thus preserving data privacy while providing personalized activity detection services. Two different cluster labelling strategies, namely, population-based, and distance-based, are employed to achieve the desired classification performance. A comparative study of these strategies has been presented in terms of classifiability and classification accuracies. The proposed system is shown to be computationally efficient, which is relevant in the context of limited computing resources on typical wearable devices. The trade-off between classification accuracy and computation complexity is analyzed for different algorithmic hyper-parameters and other system parameters. Extensive experimentation and simulation study have been conducted on a multi-user human activity data from the public do-main in order to validate the proposed learning paradigm.

Fusarium wilt, caused by Fusarium oxysporum f.sp. cubense (Foc), is recognized as one of the most devastating diseases affecting banana cultivation worldwide. In India, Foc extensively affects the Malbhog banana (AAB genomic group) production. In this study, we isolated 25 Foc isolates from wilt-affected Malbhog plantations of India. Pathogenicity test confirmed the identity of these isolates as Foc, the primary causative agent of wilt in banana. Morpho-cultural characterization of the Foc isolates showed large variation in colony morphological features, intensity, and pattern of pigmentation, chlamydospores, and conidial size. The molecular identification of these isolates using Race-1 and Race-4 specific primers established their identity as Race- 1 of Foc, with absence of TR- 4. For a more comprehensive understanding of genetic diversity of Foc isolates, we em-ployed ISSR molecular typing which revealed five major clusters. Ahigh96% diversity within Foc population indicated the presence of polymorphic loci in individuals of a given population evi-dent from results of Nei’s genetic diversity, Shannon information index, and polymorphism in-formation content values, apart from analysis of molecular variance (AMOVA). The current findings provide significant insights towards detection of Foc variants, and consequently the deployment of effective management practices to keep the possible epidemic development of disease under control along Malbhog banana growing belts of northeast India.

Chronic obstructive pulmonary disease (COPD) is strongly associated with tobacco smoking and it is the increasing cause of morbidity and mortality worldwide. The prevalence of COPD among never smokers varies widely across regions, areas, and nations. COPD in smokers has been extensively explored worldwide, however, COPD in non-smokers is under-explored and there is limited data available on non-smoking COPD. We determined the role of environmental pollution and biomass fuel exposure in COPD patients who were non-smokers. We evaluated the clinical profile of non-smokers with COPD in a retrospective observational study. 180 non-smoker COPD patients were selected from the year 2016-to 2018. We found that many patients with COPD are non-smokers and the incidence is higher among the rural population, suggesting that non-smoking COPD is evolving rapidly due to biomass smoke and other environmental pollutant exposures.

Wireless energy harvesting (EH) communication has long been considered a sustainable networking solution. However, it has been limited in efficiency, which has been a major obstacle. Recently, strategies such as energy relaying and borrowing have been explored to overcome these difficulties and provide long-range wireless sensor connectivity. In this article, we examine the reliability of the wireless-powered communication network by maximizing the net bit rate. To accomplish our goal, we focus on enhancing the performance of hybrid access points and information sources by optimizing their transmit power. Additionally, we aim to maximize the use of harvested energy by energy-harvesting relays for both information transmission and energy relaying. However, this optimization problem is complex as it involves non-convex variables and requires combinatorial relay selection indicators optimization for decode and forward (DF) relaying. To simplify this problem, we utilize the Markov decision process and deep reinforcement learning framework based on the deep deterministic policy gradient algorithm. This approach enables us to tackle this non-tractable problem, which conventional convex optimisation techniques would be difficult to solve in complex problem environments. The proposed algorithm significantly improves the end-to-end net bit rate of the smart energy borrowing and relaying EH system by 13.22%,27.57%, and 14.12% compared to the benchmark algorithm based on borrowing energy with an adaptive reward for Quadrature Phase Shift Keying, 8-PSK, and 16-Quadrature amplitude modulation schemes, respectively.

The effect of transition metal substitution for Fe and the structural and magnetic properties of Gd2Fe16Ga0.5TM0.5 (TM=Cr, Mn, Co, Ni, Cu, and Zn) compounds were investigated. Rietveld analysis of X-ray diffraction indicates that all the samples crystallize in the hexagonal Th2Ni17 structure. The lattice parameters: a, c and unit cell volume show TM ionic radii dependence. Both Ga and TM atoms show preferred site occupancy for 12j and 12k sites. The saturation magnetization at maximum room temperature was observed for Co, Ni, and Cu of 69, 73, and 77 emu/g, respectively while minimum value was observed for Zn (62emu/g) doping Gd2Fe16Ga0.5TM0.5. Highest Curie temperature of 590 K was observed for Cu doping which is 15% and 5% and thesehigher than Gd2Fe17 and Gd2Fe16Ga compounds, respectively. The hyperfine parameters viz. hyperfine field and isomer shift, show systematic dependence on the TM atomic number. The observed magnetic and Curie temperature behavior in Gd2Fe16Ga0.5TM0.5 is explained on the basis of Fe(3d)-TM(3d) hybridization. The superior Curie temperature and magnetization value of Co, Ni, and Cu doped Gd2Fe16Ga0.5TM0.5 compounds as compared to pure Gd2Fe17 or Gd2Fe16Ga makes Gd2Fe16Ga0.5TM0.5 a potential candidate for high-temperature industrial magnet applications.

The ABCDEFG Protocol provides an evolving tool for imposing structure on the flow of Covid infection information obtained from community testing, collective policy and individual compliance. ABCDEFG Protocol could not assume soundness, invariance, symmetry and completeness of the available information and relied on signaling game theory to design solutions that could evolve with the variable narratives, theories, individual utilities and pathogen variants. Thus, ABCDEFG Protocol suggests a novel and a very flexible pool-testing and badging protocol in the context of controlling contagious epidemics and tackling the far-reaching associated challenges, including understanding and evaluating individual and collective risks of returning prior infected individuals to normal society and other economic and social arrangements and interventions to protect against disease. AbCDEFG Proto uses both control theoretic and game theoretic mathematical models that may be centralized (an optimizing policy maker mandates behavior based on estimated models) or decentralized (a strategizing individual selects their behavior based on available asymmetric information). ABCDEFG protocol demonstrates how society can continue to carry out plausible economic activities in addition to controlling the prevalence of a contagious disease by keeping the number of infected people below a desired limit without compromising an individuals' privacy despite the presence of deception and selfishness among people, and limitations of available resources. Different types of badges would come with different restrictions. Badges would be reissued periodically by third-party testing centers via suitably frequent pool testing of samples of the participants. The size of the pools, frequency of tests, and allowable activities for people with a given type of badge would depend on the available resources, the prevalence of the disease, and the efficacy of the equipment used in the tests.

Introduction: To compare the results of patient-specific absolute dosimetry using homogeneous slab phantom and anthropomorphic heterogeneous female pelvic phantom in cervical cancer patients. Materials and method: Thirty RapidArc plans already planned on treatment planning system (TPS) for cervical cancer patients were exported on both the phantoms viz. RW3 slab phantom and AHFP and dose were calculated using an anisotropic analytic algorithm (AAA). All the plans were delivered by linear accelerator (LA) and the dose for each plan was measured by a 0.6cc ion chamber. The percentage (%) variation between planned and measured doses were calculated and analyzed.Results: In the case of slab phantom, the mean percentage variations between planned and measured doses of all rapid arc QA plans were as 1.4299 and standard deviation 0.768 (t=0.00508, ρ= 0.497982) The result is not significant at p < .05. For the AHFP phantom, the mean percentage variations between planned and measured doses of all rapid arc QA plans were as 6.890 and standard deviation 2.565 (t= 3.21604, ρ= 0.001063 <0.05), the outcome is significant. Discussion: In the case of homogenous slab phantom, there is less than a 3% difference in percentage between planned and measured doses with a standard deviation of 0.7682 (t=0.00508, p= .497982. The result is not significant at p< 0.05). The deviations of planned and measured value of dose in the AHFP phantom were found as 10.67% (maximum value), 2.31% (minimum value) and 6.89% (average value) with standard deviation 2.565 (t=3.21604, p=0.001063. The result is significant at p<0.05). Also, the percentage of variation between homogeneous slab phantoms with AHFP phantom, the t-value is -11.17016. The p-value is < .00001. The result is significant at p<0.05. We can see that the outcomes differ significantly due to the influence of heterogeneous media.Conclusion: AHFP phantom results showed more dose variability than slab homogenous phantom outcomes. Therefore, patient-specific absolute dosimetry should be performed using a heterogeneous phantom that closely resembles the actual human body in terms of both density and design.

High temperature Ni-superalloys are limited by reliance on critical elements and complex processing steps. High entropy alloys (HEAs) have demonstrated stable single/dual phase microstructures with strong ordering tendencies. A dual phase (FCC+BCC) Al0.5Co0.5CrFeNi1.5Ti0.25 alloy (developed using CALPHAD) was tested for room and high temperature compression behavior. The microstructure mainly comprises of coarse ordered FCC(L12) surrounding decomposed lamellae of ordered FCC(L12) and BCC(L21) phases, which coarsened upon annealing at high temperature (1100 °C) into a bi-continuous structure of disordered FCC+BCC(B2). Additionally, cold rollability of the cast alloy increased from &lt;5% to ~40% after annealing, with a corresponding softening observed in room temperature compression mainly due to disordering of FCC and BCC phases. Peak flow stresses of 793.45MPa, 535.12MPa, and 324.40MPa were achieved at 800oC, 900oC, and 1000oC respectively for the high temperature annealed alloy.

The coronavirus disease 2019 (COVID-19), the pandemic is an unprecedented health emergency never seen in the recorded history of humankind due to its sheer scale, rapid spread, and subsequent shock to the global economy. The past respiratory viral pandemics of the 21st century (SARS-CoV-2 in 2003, Influenza AH1N1 in 2009) have revealed seasonality in environmental factors to play a role in the dynamics of their spread. Here, we report the observed state-level relationship between environmental factors such as temperature (T), relative humidity (RH), specific humidity (SH), and solar radiation (SR) on the COVID-19 spread over the Indian region. The results show that T and RH have a significant impact on the disease growth rate and doubling time. Every degree rise in temperature corresponds to a 0.99 % decrease in the number of cases and an increase in doubling time by ~ 1.13 days implying a slowing down of spread. A similar analysis for RH reveals that more moisture leads to a higher growth rate and reduced doubling time. Lower SH and higher surface-reaching SR are found to reduce the spread and increase the doubling time similar to that of temperature. The range of average state-level T (RH) encountered during this period was between 24 and 35^oC (30 and 87%) which implies that environmental impact is still effective at all these T (RH) and is not limited to specific T (RH) ranges. The progression of the season towards monsoon, post-monsoon, and thereafter winter with a continuous reduction in temperature will prove a major challenge for health workers and policymakers attempting to enforce mitigation and control measures.

Balancing the levels of ammonia, in poultry facilities plays a role in enhancing the welfare and productivity of animals. Various environmental factors such as temperature, humidity, ammonia concentrations, carbon dioxide concentration and exposure to light have an impact on the wellbeing and efficiency of poultry. It is essential to monitor these elements to achieve outcomes necessitating practical, reliable and cost-effective solutions. Leveraging the Internet of Things (IoT) in conjunction with LoRa-WAN (Long Range Wide Area Network) technology presents an opportunity in the industry by enhancing connectivity among devices and facilitating real time data transmission. This research introduces a hardware and software setup for monitoring conditions at poultry farms through LoRa WAN and IoT technologies. More-over researchers employed Random Forest Machine Learning prediction models to tune the concentration of Ammonia (NH3) in poultry facilities across a wide area or multiple Poultry houses. Comparative assessments were conducted to evaluate the proposed system against devices revealing a correlation exceeding 0.9830 between the sensors and standard equipment while costing 28% less than traditional tools. The prototype displayed outcomes underscoring its potential, for managing poultry facilities across multiple farms with centralized oversight.

Long COVID is a phenomenon in which individuals experience persistent symptoms after recovering from COVID-19. The symptoms are discovered to be unique for every individual and can affect multiple organs systems in the body. This study aims to identify effective natural remedies for long COVID by analyzing hub genes associated with the symptoms of the condition and evaluating the repurposed drugs catered and used for treating the symptoms of long COVID. The most common and prevalent symptoms of long COVID were identified; Fatigue, Shortness of Breath, Loss of Smell, Headache, Brain Fog, Chest Pain, Insomnia, Heart Palpitations, Dizziness, Joint Pain, Depression, Anxiety, Tinnitus, Loss of Appetite. Hub genes for each of the symptoms provided an insight on the key biological pathways of the symptom. Repurposed drugs identified, provided the template to identify the natural compounds with similar structure as a potential therapeutic drug. The natural compounds were retrieved using fingerprint search of the repurposed drugs from the NPASS Database. The findings of this study suggest several natural remedies for each symptom based on the molecular docking of the hub gene and natural compound using iGEMDOCK. The identified natural remedies may hold promise in treating long COVID, but further research is required to explore the efficacy and effectiveness of the proposed natural compounds. The results of the study pose important implications for the development of effective treatments for long COVID.

Genetic variability in rice breeding program plays the very crucial role. It provides outstanding pool of superior alleles governing better agronomic and quality characters through association mapping. For the understanding of population structure and genetic relationship among the different rice lines is indispensable prior to setting of correlation among dynamic alleles and traits. In the present investigation, genetic diversity and population structure of 116 rice accessions by using 64 polymorphic SSR markers was targeted for the evaluation of the genetic relatedness and diversity. Genotyping assessment based on SSR markers revealed a total of 225 alleles, with an average PIC value of 0.755. The germplasm lines were classified into three distinct subgroups through population structure analysis, utilizing both model and distance-based approaches. AMOVA analysis showed that 11% of the total variation could be attributed to differences between groups, while the remaining 89% of the variation was likely due to differences within groups. The study suggests that the population structure and genetic relatedness should be considered when working with the core collection of 116 rice germplasm lines for association mapping, aiming to establish marker-trait associations.

Background: A comprehensive response to the unprecedented SARS-CoV-2 (COVID-19) chal-lenges for public health and its impact on radiation oncology patients and personnel for resilience and adaptability is presented. Methods: The general recommendations included working remote-ly when feasible, implementation of screening/safety and personal protective equipment (PPE) guidelines, social distancing, regular cleaning of treatment environment, and testing for high-risk patients/procedures. All teaching conferences, tumor boards, and weekly chart rounds were con-ducted using a virtual platform. Additionally, specific recommendations were given to each sec-tion to ensure proper patient treatments. The impact of these measures, especially adaptability and resilience, were evaluated through specific questionnaire surveys. Results: These comprehen-sive COVID-19 related measures resulted in most staff expressing a consistent level of satisfaction in regards to personal safety, maintaining a safe work environment, continuing quality patient care and continuing educational activities during the pandemic. There was a significant reduction in patient treatments and on-site patient visits with an appeciable increase in the number of tele-medicine e-visits. Conclusions: Survey results demonstrated substantial adaptability and resili-ence, including in the rapid recovery of departmental activities during the reactivation phase. In the event of a future public health emergency, the measures implemented may be adopted with good outcomes by radiation oncology departments across the globe.

Structural integrity is a crucial aspect of engineering components, particularly in the field of additive manufacturing (AM). Surface roughness is a vital parameter that significantly influences the structural integrity of additively manufactured parts. In this study, we present a comprehensive investigation into the relationship between surface roughness and structural integrity of Polyactic Acid (PLA) specimens produced through additive manufacturing. This research work focuses on the prediction of surface roughness of Additive Manufactured Polyactic Acid (PLA) specimens using eight different supervised machine learning regression-based algorithms. For the first time, Explainable AI techniques are employed to enhance the interpretability of the machine learning models. The eight algorithms used in this study are Support Vector Regression, Random Forest, XG Boost, Ada Boost, Catboost, Decision Tree, Extra Tree regressor, and Gradient Boosting regressor. The study analyzes the performance of these algorithms to predict the surface roughness of PLA specimens, while also investigating the impact of individual input parameters through Explainable AI methods. The experimental results indicate that the XG Boost algorithm outperforms the other algorithms with the highest coefficient of determination value of 0.9634. This value demonstrates that the XG Boost algorithm provides the most accurate predictions for surface roughness compared to other algorithms. The study also provides a comparative analysis of the performance of all the algorithms used in this study, along with insights derived from Explainable AI techniques.

Development of novel anti-cancer peptides requires a rapid screening process which can be accelerated by using appropriate in vitro tumor models. Breast carcinoma tissue is a three dimensional (3D) microenvironment, which contains a hypoxic center surrounded by dense proliferative tissue. Biochemical clues provided by such 3D cell mass cannot be recapitulated in conventional 2D culture systems. In this experiment, we evaluate the efficacy of the sandalwood peptide, cyclosaplin on established in vitro 3D silk breast cancer model using invasive MDA-MB-231 cell line. The anti-proliferative effect of the peptide on 3D silk tumor model is monitored by alamar blue assay, with conventional 2D culture as control. The proliferation rate, glucose consumed, LDH, and MMP-9 activity of Human breast cancer cells are higher in 3D constructs compared to 2D. A higher concentration of drug is required to achieve 50% cell death in 3D culture than 2D cultures. The cyclosaplin treated MDA-MB-231 cells showed significant decrease in MMP-9 activity in 3D constructs. Microscopic analysis revealed the formation of cell clusters evenly distributed in the scaffolds. The drug treated cells were less in number, smaller and showed unusual morphology. Overall, these findings indicate the role of cyclosaplin as a promising anti-cancer therapeutics.

Long COVID, also referred to as post-COVID-19 condition, describes the lingering after-effects of COVID-19 infection. This complex syndrome encompasses a range of symptoms affecting physical well-being, cognitive function, and mental health. The widespread impact of long COVID extends beyond individual sufferers, placing significant strain on healthcare systems and causing far-reaching socioeconomic consequences. The scale of this multifaceted health crisis is unparalleled in recent history, affecting millions globally and challenging our understanding of post-viral conditions. This study aimed to explore the possibility of targeting G protein-coupled receptors (GPCRs) signaling pathway-related genes as therapeutics for long COVID using computational analysis. Targeting GPCRs and their signaling pathways holds significant promise for long COVID therapeutics, as these receptors are involved in crucial physiological processes including immune regulation, inflammation control, and neurotransmission. All of these are implicated in the diverse and persistent symptoms of long COVID, potentially offering a versatile approach to addressing multiple aspects of the condition simultaneously. This study identified 21 genes associated with GPCRs for further exploration as potential targets. Notably, GPCR genes such as HRAS, KRAS, GNAQ, and GNA11 were determined to be possible therapeutic targets for the pathophysiological mechanisms of long COVID. FDA-approved drugs targeting these genes were identified, including Binimetinib, Cabozantinib, Selumetinib, Panitumumab, Cetuximab, Adagrasib, Tipifarnib, and Sotorasib. Additionally, Naltrexone and Tipifarnib have emerged as potential new treatment options for long COVID. SARS-CoV-2 may hijack GPCR signaling pathways to dysregulate lung ion and fluid transport, contributing to the pathophysiology of pulmonary edema in patients with COVID-19. Further research is required to translate the findings into the development of therapeutics and to investigate the relationship between viral infection and GPCR signalling.

This paper examines the regional changes of corn production and the relationship between ethanol production and corn production. The underlying hypothesis is that the rapid growth in ethanol production causes regional expansion of corn production outside the traditional regions. This paper introduces the information approach developed by entropy theory to describe these regional changes. The results support the hypothesis that ethanol production leads to expansion of corn production outside traditional corn producing regions.

RNA interference is a highly conserved process in which non-coding small RNAs (sRNA) modulate gene expression at the post-transcriptional level influencing plant growth and development. Dicer-like (DCL), Argonaute (AGO) and RNA-dependent RNA polymerase (RDR) are the core elements involved in gene silencing and their gene families have been explored in many plants. However, these genes and their response to abiotic stresses have not yet been well in wheat. In this study, 82 AGO, 31 DCL, and 31 RDR genes were identified and phylogenetic analysis of these proteins showed that clustered into ten, four and four clades respectively. RNA-seq analysis revealed constitutive expression of AGO1, AGO9, and DCL2 family expression analysis in tissues under normal and stress conditions, whereas RDR1 which is known to engage in siRNA biogenesis showed higher expression levels in wheat leaf tissues. Our findings build the foundation for comparative genomics analyses of RNA silencing elements in cereal crops, as well as new insights into the functional complexity of RNA silencing in wheat stress responses, which is critical for understanding the processes underlying wheat stress responses.

As the outbreak of coronavirus disease 2019 (COVID-19) is continuously increasing in India, so epidemiological modeling of COVID-19 data is urgently required for administrative strategies. Time series and is capable to predict future observations by modeling the data based on past and present data. Here, we have modeled the epidemiological COVID-19 Indian data using various models. Based on the collected COVID-19 outbreak data, we try to find the propagation rule of this outbreak disease and predict the outbreak situations in India. For India data, the time series model gives the best results in the form of predication as compared to other models for all variables of COVID-19. For new cases, new deaths, total cases and total deaths, the best fitted ARIMA models are as follows: ARIMA(0,2,3), ARIMA(0,1,1), ARIMA(0,2,0) and ARIMA(0,2,1). Based on time series analysis, we predict all variables for next month and conclude that the predictive value of Indian COVID-19 data of total cases is more than 20 lakhs with more than 43 thousand total deaths. The present chapter recommended that a comparison between various predictive models provide the accurate and better forecast value of the COVID-19 outbreak for all study variables.

As the demand of heating and air conditioning is increasing day by day due to getting a comfortable life, for that reason, the market for heat pump and air conditioning systems or both, is seeing a steady increase in low global warming potential. All researchers on heat pump and air conditioning systems are searching for environmentally friendly refrigerants. However, a significant number of contemporary refrigerants (HCFCs) have the potential to cause global warming and ozone depletion, such as those found in heat pump air conditioning systems. Using more environmentally friendly refrigerants, including hydrocarbon and blend refrigerant mixtures, is one way to lower GWP and Ozone depletion potential. This study examines the performance of several alternative refrigerants, including R32, R134A, R410A, R22, and R290. In order to examine the performance of R290, theoretical and simulation results are compared on various refrigerants while taking into account a number of performance parameters, including the refrigerant energy efficiency ratio, mass flow rate, coefficient of performance, cooling capacity, and compressor work for one ton of refrigeration (1TR) air conditioners. One player with a very low GWP is R290. However, the only drawback is that it can catch fire and is hazardous to use in split-type commercial heat pump air conditioning applications. The environmental and thermo physical properties of HC-290 are significantly better than those of other materials, according to theoretical and simulation studies utilizing Cool Pack software, hence it is a viable replacement.

To utilize heterosis and combining ability for grain yield and its attributing traits along with three physiological traits viz., leaf area index, chlorophyll fluorescence and chlorophyll content in bread wheat (Tritium aestivum L.) the crosses were attempted during rabi, 2019-20 in a half diallel mating scheme among 8 wheat varieties and the study was carried out during rabi, 2020-21 at Block No. D-13 field of Mahua block, Simradha research farm, Rani Lakshmi Bai Central Agricultural University, Jhansi. Analysis of variance showed significant differences for treatments. Based on per se performance the hybrids NW 5054 x PBW 723 (23.3 g), and HI 1544 x NIAW 34 (23.14 g), were identified for the higher grain yield. The hybrid HI 544 x NIAW 34 (18.41 %) was identified as the best heterotic cross for grain yield per plant and its component traits. The hybrids HI 1544 x NIAW 34 (3.40) and HI 1544 x GW 322 (2.76), as well as the parents HD 3086 (21.85) and PBW 723 (20.68), were identified as superior economic hybrids and parents based on SCA/GCA effects, per se performance for grain yield per plant, and its component trait in bread wheat. Days to heading, flag leaf length, biological yield per plant, harvest index, number of grains per spike, 1000 grain weight, spike length, leaf area index, chlorophyll fluorescence, and chlorophyll content were all positively correlated with grain yield per plant.

OBJECTIVE: Recent worldwide outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the causative agent of respiratory coronavirus disease 2019 (COVID-19), is a current, ongoing life-threatening crisis and international public health emergency. The early diagnosis and management of the disease remains a major challenge. In this review, we aim to summarize the updated epidemiology, causes, clinical manifestation and diagnosis, as well as prevention and control of the novel coronavirus SARS-CoV-2.MATERIALS AND METHODS: A broad search of the literature was performed in “PubMed” “Medline” “Web of knowledge”, and “Google Scholar” World Health Organization-WHO” using the keywords “severe acute respiratory syndrome coronavirus”, “2019-nCoV”, “COVID-19, “SARS”, “SARS-CoV-2” “Epidemiology” “Transmission” “Pathogenesis” “Clinical Characteristics”. We reviewed and documented the information obtained from literature on epidemiology, pathogenesis and clinical appearances of SARS-CoV-2 infection.RESULTS: The global cases of COVID-19 as of April 2, 2020 have risen to more than 900,000 and morbidity has reached more than 47,000. The incidence rate for COVID-19 has been predicted to be higher than the previous outbreaks of other coronavirus family members, including those of SARS-CoV and the Middle East Respiratory Syndrome Coronavirus (MERS-CoV). The main clinical presentation of SARS-CoV-2 infection ranges from asymptomatic stages to severe lower respiratory infection in the form of pneumonia. Most of the patients also presented with fever, cough, sore throat, headache, fatigue, myalgia and breathlessness.Individuals at higher risk for severe illness include elderly people and patients with a weakened immune system or that are suffering from a underlying chronic medical condition like hypertension, diabetes, cancer, respiratory illness or cardiovascular diseases.CONCLUSIONS: SARS-Cov-2 has emerged as a worldwide threat, currently affecting 170 countries and territories across the globe. There is still much to be understood regarding SARS-CoV-2 about its virology, epidemiology and clinical management strategies; this knowledge will be essential to both manage the current pandemic and to conceive comprehensive measures to prevent such outbreaks in the future.

Art of embalming as practised by Egyptian about 3000 years ago transformed into embalming science of modern ages with the use of formaldehyde as a preservative solution. Subsequently, the search for ideal embalming preservative solution continues to date because of the health hazards related to formaldehyde preservation of cadavers. Alternative preservative methods and solutions suitable for making different skill training models with the specific requirement of pliability have also experimented. The literature had documented various solutions like Thiel’s solution and technique, phenoxyethanol preservation, saturated sodium chloride solution, cryopreservation, N-Vinyl-2-pyrrolidone, Ethanol–glycerin and Fix 4life solution as alternatives to formaldehyde preservation. This review is an attempt to have an overview comparison of all the recent alternate embalming methods applicable for developing skill training cadaveric models with an aim of reducing formaldehyde usage in preservation.