In this study we used a recently developed ex vivo-in vitro model to assess the effect of feeding older adults a casein protein hydrolysate (CPH) compared with non-bioactive non-essential amino acid (NEAA) supplement on Muscle Protein Synthesis (MPS) and Breakdown (MPB). Serum from six healthy older males following overnight fast and 60 min postprandial ingestion of CPH or NEAA (0.33 g.kg^-1 body mass) was used to condition C2C12 myotube media. CPH-fed serum significantly increased MPS compared to fasted serum. In addition, CPH-fed serum induced myotube growth and markedly suppressed atrogin-1, but not MuRF1, expression. Comparatively, no change in MPS, myotube growth and gene expression was observed following NEAA-fed serum treatment. CPH-fed serum from older adults stimulated de novo MPS, suppressed markers of protein breakdown and resulted in myotube growth, indicating a potential role for CPH as a dietary protein source to prevent age-related sarcopenia.

Analytical channel design tools have not advanced appreciably in the last decades, and continue to produce designs based upon a single representative discharge that may not lead to overall sediment continuity. It is beneficial for designers to know when a simplified design may be problematic and to efficiently produce alternative designs that approximate sediment balance over the entire flow regime. The Capacity/Supply Ratio (CSR) approach, an extension of the Copeland method of analytical channel design for sand channels, balances the sediment transport capacity of a design reach with the sediment supply of a stable upstream reach over the entire flow duration curve (FDC) rather than just a single discharge. Although CSR has a stronger physical basis than previous analytical channel design approaches, it has not been adopted in practice because it can be a cumbersome and time-consuming iterative analysis without the use of software. We investigate eighteen sand-bed rivers in a comparison of designs based on the CSR approach and five single-discharge metrics: the effective discharge (Qeff), the 1.5-year recurrence interval discharge (Q1.5), the bankfull discharge (Qbf), and the discharges associated with 50th (Qs50) and 75th (Qs75) percentiles of the cumulative sediment yield curve. To facilitate this analysis we developed a novel design tool using the Visual Basic for Applications (VBA) programming language in Excel® to produce stable channel slope-width combinations based on the CSR methodology for both sand- and gravel-bed streams. The CSR Stable Channel Design Tool’s (CSR Tool) code structure was based on Copeland’s method in SAM and HEC-RAS (Hydrologic Engineering Center’s River Analysis System) and was tested with a single discharge to verify outputs. The Qs50 and Qs75 single-discharge designs match the CSR output most closely, followed by the Qbf, Qeff, and Q1.5. The Qeff proved to be the most inconsistent design metric because it can be highly dependent on the binning procedure used in the effectiveness analysis. Furthermore, we found that the more rigorous physical basis of the CSR analysis is potentially most important in designing ‘labile’ channels with highly erodible substrate, high perennial flow ‘flashiness,’ low width-to-depth ratio, and high incoming sediment load. The CSR Tool provides a resource for river restoration practitioners to efficiently utilize in-depth design techniques that can promote sediment balance in dynamic fluvial systems.

Sentinel eggs used to monitor field parasitism of stink bug pests (Hemiptera: Pentatomidae) can only be deployed for a few days to avoid releasing the pest in the monitored area. Using sterile eggs removes the risk of accidental pest introduction and extends deployment time. Freezing the eggs before deployment is one common method for sterilizing sentinel eggs. However, some egg parasitoid species have lower to no parasitism on frozen eggs. In this study, x-ray irradiation was used to sterilize Bagrada hilaris sentinel eggs intended for monitoring parasitism by Gryon aetherium (Hymenoptera: Scelionidae), the most promising biological control candidate. In this case, freezing sentinel eggs is not recommended because G. aetherium has low levels of parasitism on frozen eggs. Doses as low as 10 Gy induced 100% sterility. Irradiated eggs successfully sustained the development of G. aetherium and Ooencyrtus californicus (Hymenoptera: Encyrtidae), another egg parasitoid attacking B. hilaris, and parasitism levels were comparable to fresh eggs up to seven days. In addition, G. aetherium showed no preference for fresh non-irradiated over seven-day-old irradiated eggs. Our results indicate that x-ray irradiation is a suitable alternative to produce safe and reliable sentinel eggs to monitor egg parasitism of B. hilaris and possibly other species.

The unreliable prediction of the low frequency components from inverted acoustic impedance causes uncertainty in quantitative seismic interpretation. To address this issue, we first calculate various seismic and geological attributes that contain low frequency information, such as relative geological age, interval velocity, and integrated instantaneous amplitude. Then, we develop a method to predict the low frequency content of seismic data using these attributes, their high frequency components, and recurrent neural networks. Next, we test how to predict the low frequency components using stacking velocity obtained from velocity analysis. Using all the attributes and seismic data, we propose a supervised deep learning method to predict the low frequency components of the inverted acoustic impedance. The results obtained in both synthetic and real data cases show that the proposed method can improve the prediction accuracy of the low frequency components of the inverted acoustic impedance, with the best improvement in a real data example of 57.7% compared with the impedance predicted using well log interpolation.

Hypoxic-ischemic encephalopathy (HIE) secondary to perinatal asphyxia occurs when the brain does not receive enough oxygen and blood. A surrogate marker for ‘intact survival’ is necessary for the successful management of HIE. The severity of HIE can be classified based on clinical presentation, including presence of seizures, using a clinical classification scale called Sarnat staging; however, Sarnat staging is subjective and the score changes over time. Furthermore, seizures are difficult to detect clinically and are associated with a poor prognosis. Therefore, a tool for continuous monitoring on the cot side is necessary, for example, electroencephalogram (EEG) that non-invasively measures the electrical activity of the brain from the scalp. Then, multimodal brain imaging, when combined with functional near-infrared spectroscopy (fNIRS), can capture the neurovascular coupling (NVC) status. In this study, we first tested the feasibility of a low-cost EEG-fNIRS imaging system to differentiate between normal, hypoxic, and ictal states in a perinatal ovine hypoxia model. Here, the objective was to evaluate a portable cot side device and autoregressive (ARX) modelling to capture the perinatal ovine brain states during a simulated HIE injury. So, ARX parameters were tested with a linear classifier using a single differential channel EEG, with varying states of tissue oxygenation detected using fNIRS, to label simulated HIE states in a perinatal ovine hypoxia model. Then, we showed the technical feasibility of the low-cost EEG-fNIRS device and ARX modeling with support vector machine classification for a human HIE case series with and without sepsis. The classifier trained with the ovine hypoxia data labelled ten severe HIE human cases (with and without sepsis) as “hypoxia” group and the four moderate HIE human cases as the “control” group. Furthermore, we showed the feasibility of experimental modal analysis (EMA) based on the ARX model to investigate the NVC dynamics using EEG-fNIRS joint-imaging data that differentiated six severe HIE human cases without sepsis from four severe HIE human cases with sepsis. In conclusion, our study showed the technical feasibility of EEG-fNIRS imaging, ARX modeling of NVC for HIE classification, and EMA that may provide a biomarker to detect sepsis effects on the NVC in HIE.

This paper investigates pseudo-polymorphism in 2-pyridylmethoxy derivatives of p-tert-butylcalix[4]arene (PyC4), p-tert-butyldihomooxa-calix[4]arenes (PyHOC4), and p-tert-butylhexahomotrioxacalix[3]arenes (PyHO3C3), presenting 11 crystal structures with 15 crystallographically independent molecules. The macrocycle of PyC4 is smaller and less flexible with respect to those of PyHOC4 and PyHO3C3 and in solution, the cone conformation of these three molecules exhibit different point symmetries: C4, Cs and C3, respectively. A correlation is observed between the macrocycle's structural rigidity and the number of pseudo-polymorphs formed. The more rigid PyC4 displays a higher number (6) of pseudo-polymorphs compared to PyHOC4 and PyHO3C3, which exhibit a smaller number of crystalline forms (3 and 2, respectively). The X-ray structures obtained show that the conformation of the macrorings is primarily influenced by the presence of an acetonitrile guest molecule within the cavity, with limited impact from crystal packing and intermolecular cocrystallized solvent molecules. Notably, both calix[4]arene derivatives produce host-guest complex with acetonitrile, while the most flexible and less aromatic PyHO3C3 do not give crystals with acetonitrile as guest. Intertwined 1D and 2D solvent channel networks were observed in the PyHOC4-hexane and in the PyHO3C3-H2O-MeOH crystal structures, respectively, while the other pseudopolymorphs of PyHOC4 and PyHO3C3 and all PyC4 crystal forms exhibit a closely packed crystal structures without open channels.

Rationale:First discovered in 1990, the endocannabinoid system (ECS) was initially shown to have an intimate relationship with central areas of the nervous system associated with pain, reward, and motivation. Recently, however, the ECS has been extensively implicated in the cardiovascular system with contractility, heart rate, blood pressure, and vasodilation. Emerging data demonstrates modulation of the ECS plays an essential role in cardio metabolic risk, atherosclerosis, and can even limit damage to cardiomyocytes during ischemic events.Patient Concerns:This case describes a 63-year-old male who presented to a primary care physician for a medical cannabis (MC) consult due to unstable angina (UA) not relieved by morphine or cardiac medications; having failed all first- and second-line poly-pharmaceutical therapies. The patient reported frequent, unprovoked, angina and exertional dyspnea.Diagnosis:Having a complex cardiac history, the patient first presented 22 years ago after a suspected myocardial infarction (MI). He re-presented in 2010 and underwent stent placement at that time for inoperable triple-vessel coronary artery disease (CAD) which was identified via percutaneous transluminal coronary angioplasty. UA developed on follow up and, despite medical management over the past 6 years, his UA became progressively debilitating.Interventions and Outcomes:In conjunction with his standard cardiac care, patient had a gradual lessening of UA related pain, including frequency and character, after using an edible form of medical cannabis (MC) (1:1 CBD:THC). Following continued treatment, he ceased long term morphine treatment and describes the pain as no longer crippling. As demonstrated by his exercise tolerance tests, the patient experienced an improved functional capacity and reported an increase in his daily functioning, and overall activity.Lessons:This case uniquely highlights MC in possibly reducing the character, quality, and frequency of UA; while concordantly improving functional cardiac capacity in a patient with CAD. Additional case reports are necessary to verify this.

Laboratories generate various forms of wastes which contribute to a complex network of profound and multifaceted environmental challenges and associated public health issues if not properly managed.Traditional laboratory practices particularly in developing countries, often lead to excessive waste generation, chemical contamination and resource depletion, coupled with inefficient waste management which poses risks to both ecosystem and public health. As the environmental impact of laboratory waste escalates, the need for effective waste management becomes increasingly important and urgent for safeguarding environmental health. This review examines the impact of laboratory waste management practices on environmental health and explores sustainable laboratory medicine as a mitigating response. Sustainable laboratory medicine adopts practices such as green laboratory principles involving waste minimization, resource conservation, the use of eco-friendly materials as well as energy-efficient protocols and innovative waste segregation and treatment technologies. This approach complies with regulatory standards as well as emphasizes proactive orientation towards environmental stewardship, operational efficiency and innovation while maintaining scientific integrity. Sustainable laboratory medicine appears to be a crucial framework that mitigates the environmental health impacts associated with laboratory-derived waste. This review advocates for a paradigm shift towards sustainable laboratory operations and emphasizes the need for comprehensive training, institutional commitment, and regulatory support.

To achieve n-type doping in diamond, extensive investigations employing first principles have been conducted on various models of phosphorus doping and boron-phosphorus co-doping. The primary focus of this study is to comprehensively analyze the formation energy, band structure, density of states, and ionization energy of these structures. It is observed that within a diamond structure solely composed of phosphorus atoms, the formation energy of an individual carbon atom is excessively high. However, the substitution of two carbon atoms leads to the conversion of diamond into a p-type semiconductor. Upon examining the P-B co-doping structure, it is revealed that the doped impurities exhibit a tendency to form more stable cluster configurations. As the separation between the freely doped atoms and the cluster impurity structure increases, the overall stability of the structure diminishes, consequently resulting in an elevation of the ionization energy. Analysis of the electronic density of states demonstrates that the electron orbit of the B atom makes negligible contributions to the impurity levels during P-B doping.

Malaria parasites increase their host erythrocyte’s permeability to obtain essential nutrients from plasma and facilitate intracellular growth. In the human P. falciparum pathogen, this increase is mediated by the plasmodial surface anion channel (PSAC) and has been linked to CLAG3, as encoded by one member of the conserved clag multigene family. Whether paralogs encoded by other clag genes also contribute to PSAC formation or serve unrelated roles remains unknown. Here, we generated transfectant lines carrying epitope-tagged versions of each CLAG. Each paralog colocalized with CLAG3, with concordant trafficking via merozoite rhoptries to the host erythrocyte membrane of newly-invaded erythrocytes. Each also exists within infected cells in at least two forms: an alkaline-extractable soluble form and a form integral to the host membrane. Like CLAG3, CLAG2 has a variant region cleaved by extracellular protease but CLAG8 and CLAG9 are protease-resistant. Paralog knockout lines, generated through CRISPR/Cas9 transfection, exhibited uncompromised growth in PGIM, a modified medium with more physiological nutrient levels; this finding is in marked contrast to a recently reported CLAG3 knockout parasite. CLAG2 and CLAG8 knockout lines exhibited compensatory increases in transcription of remaining clags and associated rhoph genes, yielding increased PSAC-mediated uptake to specific solutes. We also report distinct transport properties of these knockout lines, suggesting partially overlapping roles of CLAG paralogs in PSAC activity. We propose that the nutrient channel pore is formed by a higher order assembly of CLAG proteins at the host membrane.

We introduce the notion of p-adic magic contraction on p-adic Hilbert space. We derive p-adic Halmos dilation, p-adic Egervary N-dilation, p-adic von Neumann inequality and p-adic Sz.-Nagy dilation for p-adic magic contraction.

Previous studies have found that individuals with limited motor capabilities due to acquired neurological injury (e.g., spinal cord injury and stroke) can make accurate action possibility judgements for neurologically healthy individuals. Previous studies have shown that people with limited motor capabilities may rely on previous motor experience (i.e., pre-injury) when making action possibility judgments for others. In the present study, we examined whether having severely limited previous motor experience from birth, as a consequence of spinal muscle atrophy (SMA), alters the action possibility judgments made for neurologically healthy individuals. Participants with SMA and Neurologically Healthy (NH) sex- and age-matched controls performed a perceptual-motor judgment task using the Fitts’s law paradigm (see Fitts, 1954). Participants observed apparent motion videos of reciprocal aiming movements with varying indices of difficulty (ID, see: Manson et al., 2014). For each movement, participants predicted the shortest movement time (MT) at which a neurologically healthy young adult could perform the task while maintaining accuracy. Between-group comparisons revealed that participants with SMA predicted significantly longer MTs compared to controls. Regression analyses revealed that predicted MTs of both NH and SMA participants exhibited a Fitts’s law relationship (i.e., the predicted MTs significantly increased as movement difficulty increased). A supplementary analysis on the SMA group revealed no differences in predicted MTs between the participants with some and no motor function as assessed by the SMA health index. Overall, these results provide evidence that participants with SMA who have limited or no motor experience may make more conservative action possibility judgments for others. Critically, our finding that the pattern of action possibility judgements (e.g., the slopes of the regression lines) were not different between SMA and NH groups provides evidence that limited previous motor experience may not completely impair action possibility judgements.

1) Background: Climate change may subject forests to climate conditions to which they are not adapted. Elevated temperatures reduce net photosynthesis by increasing respiration rates and increasingly long droughts dramatically increase morbidity. CO₂ enrichment enhances productivity, but it is not clear to what extent CO₂ enrichment can offset the negative effects of elevated temperatures and longer droughts. 2) Methods: We used a mechanistic landscape model to conduct controlled simulation experiments manipulating CO₂ concentration, temperature, drought length and soil water capacity. 3) Results: We found that elevated CO₂ stimulates productivity such that it dwarfs the negative effect caused by elevated temperature. Energy reserves were not as strongly mitigated by elevated CO₂, and mortality of less competitive cohorts increased. Drought length had a surprisingly small effect on productivity measures, but had a marked negative effect on mortality risk. 4) Conclusions: Elevated CO₂ compensated for the negative effect of longer droughts in terms of productivity measures, but not survival measures.

In this paper, we define and investigate modified p-Leonardo, p-Leonardo-Lucas and p-Leonardo sequences as special cases of the generalized Leonardo sequence. We present Binet's formulas, generating functions, Simson formulas, and the summation formulas for these sequences. Moreover, we give some identities and matrices related with these sequences. Furthermore, we show that there are close relations between modified p-Leonardo, p-Leonardo-Lucas, p-Leonardo numbers and Fibonacci, Lucas numbers.

Malawi has developed an excellent, nation-wide system for monitoring people infected with HIV and keeping track of key epidemic markers. Their success lies in two things: the focus on simplicity and the use of data collection not only to track the epidemic and identify problems but also to give regular feedback and support to every clinic in the country. This achievement is the more remarkable given that Malawi is one of the poorest countries in the world, ranking 190 out of 194 countries by GDP, but has one of the most severe epidemics of HIV in the world, ranking 9th out of 168 countries by HIV prevalence. We first discuss the current state and likely future epidemic trends in Malawi: unless we know where we are and where we are going we cannot decide what to do or how to do it to in order to achieve a better outcome. We then discuss the history and development of Malawi’s patient monitoring system, as reported in their Integrated HIV Program Reports,ix which have been published quarterly since the beginning of 2004. We consider the current state of patient monitoring and support as reflected in the most recent report for the third quarter (Q3) of 2016 and comment on some of the questions that this raises. Finally, we consider ways in which the current system could be improved by strengthening Malawi’s analytical capacity and making better use of this unique data set. The focus here is on HIV in adultsv because if ART is initiated early in all adults living with HIV this should include testing all pregnant women for HIV and starting them on treatment immediately. However, PMTCT is especially important and care must be given to reducing MTCT and identifying the long-term child survivors of mother-to-child transmission and this demands a complementary assessment. There is an ongoing debate about the relative merits of treatment and prevention in reducing transmission and it should be made clear that the primary reason for starting people on treatment early is that it is in the best interest of the individual patient to start treatment as soon as possible after becoming infected. Allowing a person’s immune system to deteriorate to any degree is not consistent with the clinician’s commitment to ‘first do no harm’ and even those with the highest CD4⁺ cell count are at a substantially increased risk of death. What matters, therefore, is to get as many people as possible onto ART, ensure that they remain virally suppressed, and consider prevention in this context.

Insecticides with novel modes of action are required to complement the pyrethroids currently relied upon for controlling malaria vectors. One example of this is the neonicotinoid clothianidin, which is found in SumiShield™ 50WG used in indoor residual spraying (IRS). In a preliminary experiment, mortality in insecticide susceptible and resistant An. gambiae adults exposed to SumiShield™ 50WG-treated filter papers reached 80% by 3-days post-exposure and 100% by 6-days post-exposure. Next, cement, wood, and mud tiles were treated with SumiShield™ 50WG or K-Othrine® WG250 (deltamethrin IRS formulation) and insecticide resistant and susceptible Anopheles and Aedes were exposed to these surfaces periodically for up to 18-months. Pyrethroid resistant Cx. quinquefasciatus were also exposed at 9 months. Between exposures tiles were stored in heat and relative humidity conditions reflecting those found in the field. On these surfaces, SumiShield™ 50WG was effective at killing both susceptible and resistant An. gambiae for 18 months post-treatment, while mortality amongst the resistant strains when exposed to deltamethrin (K-Othrine® WG250) IRS was not above that of the negative control. Greater efficacy of SumiShield™ 50WG was also demonstrated against insecticide resistant strains of An. funestus compared to deltamethrin, though the potency was lower when compared with An. gambiae. In general, a higher efficacy of SumiShield™ 50WG was observed on cement and mud compared to wood. SumiShield™ 50WG demonstrated poor residual activity against Aedes aegypti and Culex quinquefasciatus. Overall, the results suggest SumiShield™ 50WG is well suited for malaria control.

South Africa is afflicted with the worst epidemic of HIV in the world a legacy of the system of oscillating migrant labour in the region and the consequent social disruption that was the legacy of Apartheid. The initial response from the national government was slow and ineffective but once the magnitude of the epidemic became apparent the government began to respond. The investment in HIV- and TB-related activities in 2013 was R22 Bn or (US$2.5; 2013 exchange rate) of which the South Africa government contributed 80% and the Presidents Emergency Plan for AIDS Relief (PEPFAR) 17%. South Africa now has the more people on anti-retroviral therapy than any other country and treatment is being started much sooner after infection. Much of the best biomedical, virological, immunological, mathematical and social science around the treatment and prevention of HIV and AIDS and the associated epidemic of TB has been done by South African’s and their international collaborators. If the efforts to control the epidemic are maintained South Africa is on track to meet the UNAIDS 90-90-90target by 2020 and to End AIDS by 2030 in spite of the magnitude of the problem. While individual, patient level data are increasingly available, especially in the Western Cape, much greater efforts need to be made to ensure that the information collected in this way is used to give feedback and support to clinic staff, to ensure that health clinics are providing the best possible service, and to individual patients and people living with HIV to ensure that they are receiving the best possible care and support. South Africa needs to make better use of the rich and detailed data that are being collected from individual clinics and their patients to identify problems or difficulties at the clinic level and to ensure that individual patients are retained on treatment, are virally suppressed and receive the best possible care and support.

(1) Background: The purpose of this study is to evaluate the full arch scan accuracy (precision and trueness) of nine digital intra-oral scanners and four lab scanners. Previous studies have compared the accuracy of some intra-oral scanners, but as this is a field of quickly developing technologies, a more up-to-date study was needed to assess the capabilities of currently available models.; (2) Methods: The present in vitro study compared nine different intraoral scanners (Omnicam 4.6; Omnicam 5.1; Primescan; CS 3600; Trios 3; Trios 4; Runyes; i500 and DL206) as well as four lab light scanners (Einscan SE; 300e; E2 and Ineos X5) to investigate the accuracy of each scanner by examining the overall trueness and precision. Ten aligned and cut scans from each of the intra-oral and lab scanners in the in vitro study were brought into CloudCompare. A comparison was made with the master STL using the CloudCompare 3D analysis best-fit algorithm. The results were recorded along with individual standard deviation and a colorimetric map of the deviation across the surface of the STL mesh; a comparison was made to the master STL, quantified at specific points. ; (3) Results: In the present study, the Primescan had the best overall trueness (17.3 ± 4.9). Followed by (in order of increasing deviation) the Trios 4 (20.8 ± 6.2), i500 (25.2 ± 7.3), CS3600 (26.9 ± 15.9), Trios 3 (27.7 ± 6.8), Runyes (47.2 ± 5.4), Omnicam 5.1 (55.1 ± 9.5), Omnicam 4.6 (57.5 ± 3.2) and Launca DL206 (58.5 ± 22.0). Regarding the lab light scanners, the Ineos X5 had the best overall trueness with (0.0 ± 1.9). Followed by (in order of increasing deviation) the 3Shape E2 (3.6 ± 2.2), Up3D 300E (12.8 ± 2.7), and Einscan SE (14.9 ± 9.5); (4) Conclusions: This study confirms that all current generations of intra-oral digital scanners can capture a reliable, reproducible full arch scan in dentate patients. Out of the intra-oral scanners tested, no scanner produced results significantly similar in trueness to the Ineos X5. However, the Primescan was the only one to be statistically of a similar level of trueness to the 3Shape E2 lab scanner. All scanners in the study had mean trueness of under 60-micron deviation. While this study can compare the scanning accuracy of this sample in a dentate arch, the scanning of a fully edentulous arch is more challenging. The accuracy of these scanners in edentulous cases should be examined in further studies.

Dust inhalation is a huge concern in the mining environment and within all its operations. In fact, dust to be one of the most serious occupational hazards in the mining industry. Coal and crystalline silica dust are the causes of serious, sometimes fatal lung diseases such as pneumoconiosis, which affects coal miners, as well as silicosis, tuberculosis, chronic bronchitis, emphysema, chronic obstructive pulmonary disease, and chronic renal disease, which affect coal and other types of miners. The resulting effects both affect workers and nearby communities. The mining industry has in the past, employed several approaches to reduce effects of dust. But these strategies have often been ineffective because the grass withers during the dry season and sprayed water is rapidly absorbed or evaporates. This paper endeavors to review information on dust in the mining environment and how it is a nuisance to workers and communities and establish what strategies exist for this.

Reactions of quinones with compounds containing an amino group can produce a wide variety of addition or substitution products that depend on reactivity of both quinone and amino derivative. 6,7-Dichloropyrido[1,2-a]benzimidazole-8,9-diones undergo selective nucleophilic substitution reaction with different benzohydrazides and α-hydroxy-p-quinone imine derivatives stabilized by strong intramolecular hydrogen bond were isolated. Synthesized compounds represent a combination of several structural motifs: benzimidazole core fused with α-hydroxy-p-quinone imine which contains a benzamido fragment. The protonation/deprotonation processes were investigated in a solution using UV-Vis spectroscopy and 1H NMR titration experiment. X-ray crystallography analysis revealed a set of weak non-covalent interactions such as intra- and intermolecular hydrogen bonds and π-π stacking. Additionally, the redox behavior of 6,7-dichloropyrido[1,2-a]benzimidazole-8,9-dione and its p-imino derivative was investigated in acidic and neutral environment using cyclic voltammetry measurements. Cathode material based on 6,7-dichloropyrido[1,2-a]benzimidazole-8,9-dione could act as potential effective active electrode in aqueous electrolyte batteries, however further optimization is required.

Pseudomonas aeruginosa is an opportunistic Gram-negative bacterium that remains a prevalent clinical and environmental challenge. Quorum sensing (QS) molecules are effective biomarkers in pinpointing the presence of P. aeruginosa. This study aimed to develop a convenient-to-use whole-cell biosensor using P. aeruginosa reporters individually encapsulated within alginate-poly-L-lysine (alginate-PLL) microbeads to specifically detect the presence of bacterial autoinducers. The PLL-reinforced microbeads were prepared using a two-step method involving ionic crosslinking and subsequent coating with thin layers of PLL. The alginate-PLL beads showed good stability in the presence of a known cation scavenger (sodium citrate), which typically limits the widespread applications of calcium alginate. In media containing synthetic autoinducers, such as N-(3-oxo dodecanoyl) homoserine lactone (3-oxo-C12-HSL) and N-butanoyl-L-homoserine lactone (C4-HSL) or cell-free supernatants of planktonic or flow cell biofilm effluent of wild P. aeruginosa (PAO1), the encapsulated bacteria enabled a dose-dependent detection of the presence of these QS molecules. The prepared bioreporter beads remained stable during prolonged storage at 4 and -80 °C and were ready for on-the-spot sensing without the need for recovery. This whole-cell biosensor demonstrates the practicality of the encapsulated bioreporter for bacterial detection based on specific QS molecules.

Introduction: The term 3D printing is commonly used to depict an assembling method whereby the final form of an object is the result of the addition of different layers to build the frame of an object. This procedure is more accurately portrayed as additive manufacturing and is likewise alluded to as fast prototyping. The term 3D printing, in any case, is generally new and has been an active part of current developments in Dentistry. Much publicity encompasses the evolution of 3D printing, which is hailed as an innovation that will perpetually change CAM manufacturing, including in the dental sector. This review is the first part in a 3D Printing series that looks at the history of 3D Printing, the technologies available and reviews the literature relating to the accuracy of these technologies. Conclusions: The recent advancement in digital dentistry to incorporate these tools has modernised dental practices by paving the way for computer-aided design (CAD) technology and rapid prototyping. The use of 3D printing has led to 3D digital models produced with intraoral scanners (IOS), which can be manipulated easily for diagnosis, treatment planning, mockups, and a multitude of other uses. Combining 3D Printing with a 3D intraoral scan eliminates the need for physical storage but makes it to retrieve a 3D models for use within all dental modalities.

Crop production in Afghanistan suffers from limited phosphorus (P) availability, which severely hinders national agriculture sustainability. This present study hypothesized that deep fertilizer placement could significantly enhance uptake of immobile P and thus tissue P accumulation and crop yield. A two-year pot experiment growing two maize (Zea mays) hybrid cultivars (Xida-789 and Xida-211) was therefore conducted to test these hypotheses under three contrasting fertilizer placement methods (broadcast, side band, and deep band). In doing so, P concentrations in both maize tissues and soils were compared at 45, 60, and 115 days after sowing (DAS) under nine combinations of nitrogen (N) and P fertilizer rates (kg ha-1: N112P45, N112P60, N112P75, N150P45, N150P60, N150P75, N187P45, N187P60, N187P75). Results have shown that deep band placement significantly increased P uptake efficiency, leading to greater P concentration and accumulation in maize tissues compared to other two fertilization methods. This improved P uptake was attributed to several factors associated with deep placement, including reduced P fixation, enhanced root access to P, and moisture availability for P uptake. Additionally, deep band placement combined with higher N application rates (N187 and N150) further enhanced plant P uptake by promoting P availability and utilization mechanisms. Deep band placement also resulted in significantly higher total soil P, Olsen-P, and P use efficiency than broadcast and side band methods, indicating a more efficient P fertilization strategy for maize that can improve growth and yield. This present study also found positive correlations between P concentration in plant organs and soil Olsen-P, highlighting the importance of adequate soil P levels for optimal plant growth. Overall, our results have showed that deep band fertilizer placement emerged as a superior strategy for enhancing P uptake efficiency, utilization, and maize productivity compared to broadcast and side band placement. This approach can potentially optimize P fertilizer utilization, improve maize growth and yield, while minimizing environmental P losses associated with broadcast applications.

We introduce the notion of p-adic equiangular lines and derive the first fundamental relation between common angle, dimension of the space and the number of lines. More precisely, we show that if {τj} n j=1 is p-adic γ-equiangular lines in Qd p , then (1) |n| 2 ≤ |d| max{|n|, γ2 }. We call Inequality (1) as the p-adic van Lint-Seidel relative bound. We believe that this complements fundamental van Lint-Seidel [Indag. Math., 1966] relative bound for equiangular lines in the p-adic case. Keywords: Equiangular lines, p-adic Hilbert space.

The relationship of Amyotrophic Lateral Sclerosis, Parkinson Disease and other age-related neurodegenerative diseases associated with mitochondrial dysfunction has led to study of the mitochondrial fission gene Drp1 in Drosophila. Drp1 can interact with mitochondrial proteins including parkin and the Drosophila Bcl-2 proteins. Mutations in Drp1 can lead to mitochondrial dysfunction and neuronal loss. Ddc-Gal4 was exploited to direct the expression of Drp1 and the inhibition of Drp1 in neurons. Here, the inhibition of Drp1 seems to compromise locomotor function throughout life but does not alter longevity. The consequences of Drp1 overexpression can be suppressed through overexpression of pro-survival Bcl-2 gene Buffy or by inhibition of the pro-cell death Bcl-2 homologue Debcl. The expression of Buffy suppresses the poor climbing induced by loss of Drp1 function. Interestingly, the loss of parkin function is rescued by the directed inhibition of Drp1. Alteration of the expression of Drp1 acts to phenocopy neurodegenerative disease phenotypes in Drosophila, while overexpression of Buffy can counteract these phenotypes to improve overall health. The pro-survival effect of Buffy can rescue the phenotypic effect due to the Drp1-induced apoptosis. The diminished health due to either overexpression or inhibition of Drp1 has produced a novel model to investigate mechanisms underlying neurodegenerative disease.

Childsmile is Scotland’s national child oral health improvement programme designed to reduce inequalities in oral health and ensuring universal access to NHS dental services by working closely with children and their families. Research has shown that parents with more dental concerns are less likely to bring their children for regular preventive dental check-ups. Therefore, a communication toolkit named ‘Chatterbox’ was created to help families access dental care services. This study aimed to evaluate the acceptability of Chatterbox from the perspective of parents with young children and from staff who work with them. Thirty parents of young children, volunteers, and staff affiliated with three third-sector family support organisations in Dundee participated in in-depth interviews, focus groups, and observations to assess the objectives of Chatterbox. Framework analysis was conducted to capture the themes, patterns, and findings triangulated using observations and field notes. Chatterbox was found to promote effective communication, identify barriers to dental attendance, provide a platform for reflection, convey the complexities of daily life, and boost parents' confidence to seek assistance. Chatterbox has the potential to help parents in accessing preventive dental care for their young children, when used with trained support workers.

The effective Supervisory Control and Data Acquisition (SCADA) system can improve the reliability, safety and economic benefits of microgrid operation. In this research, the lower central controller and upper WEB monitoring system are connected by the SCADA system which is as the hub of microgrid intelligent monitoring platform. This system contains a set of specific functions programmed by Java as a middleware which can provide control and communication between the central controller and the upper monitoring system. The system realizes the real-time data acquisition and storage, the control instructions parsing and transmitting, the microgrid security and stability, the load balancing and resource recovery of the microgrid. All that functions have been tested and verified in the actual operation.

The ability to replicate scientific experiments is a cornerstone of the scientific method. Sharing ideas, workflows, data, and protocols facilitates testing the generalizability of results, increases the speed that science progresses, and enhances quality control of published work. Fields of science such as medicine, the social sciences, and the physical sciences have embraced practices designed to increase replicability. Granting agencies, for example, may require data management plans and journals may require data and code availability statements along with the deposition of data and code in publicly available repositories. While many tools commonly used in replicable workflows such as distributed version control systems (e.g. “git”) or scripted programming languages for data cleaning and analysis may have a steep learning curve, their adoption can increase individual efficiency and facilitate collaborations both within entomology and across disciplines. The open science movement is developing within the discipline of entomology, but practitioners of these concepts or those desiring to work more collaboratively across disciplines may be unsure where or how to embrace these initiatives. This article is meant to introduce some of the tools entomologists can incorporate into their workflows to increase the replicability and openness of their work. We describe these tools and others, recommend additional resources for learning more about these tools, and discuss the benefits to both individuals and the scientific community and potential drawbacks associated with implementing a replicable workflow.

The efficient preparation of single-stranded DNA (ssDNA) rings, as a macromolecular construction approach with topological features, has aroused much interest due to their numerous applications in biotechnology and DNA nanotechnology. However, an extra splint is essential for enzymatic circularization, and by-products of multimers are usually present at high concentrations. Here, we proposed a simple and robust strategy of using permuted precursor (linear ssDNA) for circularization by forming an intramolecular dynamic nick using a part of the linear ssDNA substrate itself as the template. After the simulation of the secondary structure for desired circular ssDNA, the linear ssDNA substrate is designed to have its ends on the duplex part (≥5 bp). By using this permuted substrate with 5'-phosphate, the splint-free circularization is simply carried out by T4 DNA ligase. Very interestingly, formation of only several base pairs (2–4) flanking the nick is enough for ligation, although they form only instantaneously under ligation conditions. More significantly, the 5 bp intramolecular duplex part commonly exists in genomes or functional DNA, demonstrating the high generality of our approach. Our findings are helpful for understanding the mechanism of enzymatic DNA ligation from the viewpoint of substrate binding.

Innovative tissue engineering biomimetic hydrogels based on hydrophilic polymers have been investigated for their physical and mechanical properties. 5% to 25% by volume loading PHEMA-nanosilica glassy hybrid samples were equilibrated at 37°C in aqueous physiological isotonic and hypotonic saline solutions (0.15 and 0.05 M NaCl) simulating two limiting possible compositions of physiological extracellular fluids. The glassy and hydrated hybrid materials were characterized both for dynamo-mechanical properties and equilibrium absorptions in the two physiological-like aqueous solutions. Mechanical and the morphological modifications occurring in the samples have been described. The 5% volume nanosilica loading hybrid nanocomposite composition showed mechanical characteristics in the dry and hydrated states that were comparable to those of cortical bone and articular cartilage, respectively, and then chosen for further sorption kinetics characterization. Sorption and swelling kinetics were monitored up to equilibrium. Changes in water activities and osmotic pressures in the water-hybrid systems equilibrated at the two limiting solute molarities of the physiological solutions have been related to the observed anomalous sorption modes using the Flory-Huggins interaction parameter approach. The bulk modulus of the dry and glassy PHEMA-5% nanosilica hybrid at 37°C has been observed to be comparable with the values of the osmotic pressures generated from the sorption of isotonic and hypotonic solutions. The anomalous sorption modes and swelling rates are coherent with the difference between osmotic swelling pressures and hybrid glassy nano-composite bulk modulus: the lower the differences the higher the swelling rate and equilibrium solution uptakes. Bone tissue engineering benefits of use of tuneable biomimetic scaffold biomaterials that can be “designed” to act as biocompatible and biomechanically active hybrid interfaces are discussed.

In this paper, we prove the existence of three solutions for a $p$-Kirchhoff problem with $\psi$-Hilfer fractional derivative. To be more precise, we use the variational method and we prove that the associated functional energy admits a critical point in each of the three constructed sets, these critical points are weak solutions for a studied problem. Moreover, by definition of these sets, one of these solutions is positive, the second is negative, and the third one change sign. At the end of this work, we present an example to validate our main results.

The horizontal storm structure surrounding lightning ignited wildfires is examined using Vaisala’s National Lightning Detection Network (NLDN), NCEP’s Stage IV gauge corrected radar precipitation mosaic, and the US Forest Service’s Fire Occurrence Database. Though lightning flash density peaks strongly around fire ignitions on the instantaneous 1 km scale, on the hourly 10 km scale both the lightning and precipitation peaks are typically offset from fire ignitions. Lightning density is higher and precipitation lower around ignition points compared to non-ignition points. Both regression and horizontal distributions are consistent with the claim that positive flashes have a stronger association with ignition than negative flashes, but the statistical significance remains ambiguous

Dielectric elastomers, such as thermoplastic polyurethanes (TPU), are widely used as dielectric layer, emulation layer and substrate of flexible and stretchable devices. To construct capacitors and actuators that work stably upon deformation, it has become an urgent need to investigate the evolution of dielectricity under stress and strain. However, the lack of effective methods for estimating the dielectric constant of elastomers under strain poses a big challenge. This article reports a device for in-situ measuring the dielectric constant of TPU under strain. It is found that upon stretching TPU to a strain of 400%, its dielectric constant decreases from 8.47 to 2.94. In addition, combined Fourier-transform infrared spectroscopy, X-ray scattering technique, and atomic force microscopy have been utilized to characterize the evolution of microstructure under strain. The investigation under tensile strain reveals that a decreased density and average size of polarized hard domains, along with a tendency of the molecular chains to align in parallel with the tensile stress. The evolution of the microstructures results in a reduction of the dielectric constant parallel to the electric field in TPU. Our work provides valuable experimental reference for improving the stability of flexible sensors and actuators based on dielectric elastomers.

Dietary vitamin A/all-trans retinol/ROL plays a critical role in human vision. ROL circulates bound to the plasma retinol-binding protein (RBP4) as RBP4-ROL. In the eye, the STRA6 membrane receptor binds to circulatory RBP4 and internalizes ROL. STRA6 is however not expressed in systemic tissues, where there is high-affinity RBP4 binding and ROL uptake. We tested the hypothesis, that the second retinol-binding protein 4 receptor 2 (Rbpr2) which is highly expressed in systemic tissues of zebrafish and mouse, contains a functional RBP4 binding domain, critical for ROL transport. As for STRA6, modeling and docking studies confirmed three conserved RBP4 binding residues in zebrafish Rbpr2. In cell culture studies, disruption of the RBP4 binding residues on Rbpr2 almost completely abolished uptake of exogenous vitamin A. CRISPR generated rbpr2-RBP4 domain zebrafish mutants showed microphthalmia, shorter photoreceptor outer segments, and decreased opsins, that were attributed to impaired ocular retinoid content. Injection of WT-Rbpr2 mRNA into rbpr2 mutant or all-trans retinoic acid treatments rescued the mutant eye phenotypes. In conclusion, zebrafish Rbpr2 contains a putative extracellular RBP4-ROL ligand-binding domain, critical for yolk vitamin A transport to the eye for ocular retinoid production and homeostasis, for photoreceptor cell survival.

Mass transfer restrictions of scaffolds are currently hindering the development of three-dimensional (3D), clinically viable, and tissue engineered constructs. For this situation, a 3D poly(lactide-co-glycolide)/hydroxyapatite porous scaffold, which was much favorable for transfer of nutrients to and waste products from the cells in the pores, was developed in this study. The 3D scaffold had an innovative structure, including macropores with diameters of 300−450 μm for cell ingrowth and microchannels with diameters of 2−4 μm for nutrition and waste exchange. The mechanical strength in wet state was strong enough to offer the structural support. The typical structure was more beneficial for the attachment, proliferation, and differentiation of rabbit bone marrow mesenchymal stem cells (rBMSCs). The alkaline phosphatase (ALP) activity and calcium (Ca) deposition were evaluated on the differentiation of rBMSCs, and the results indicated that the microchannel structure was very favorable for differentiating rBMSCs into maturing osteoblasts. For repairing rabbit radius defects in vivo, there was rapid healing in the defects treated with the 3D porous scaffold with microchannels, where the bridging by a large bony callus was observed at 12 weeks post-surgery. Based on the results, the 3D porous scaffold with microchannels was a promising candidate for bone defect repair.

Legionella bacteria can proliferate in poorly maintained water systems, posing risks to users. All Legionella species are potentially pathogenic but Legionella pneumophila (L. pneumophila) is usually the primary focus of testing. However, Legionella anisa (L. anisa) also colonises water distribution systems, is frequently found with L. pneumophila and could be a good indicator for increased risk of nosocomial infection. Anonymized data from three commercial Legionella testing laboratories afforded analysis of 565,750 water samples. Data covered July 2019 to August 2021, including the COVID-19 pandemic. Results confirmed L. anisa commonly colonises water distribution systems, being the most frequently identified non-L. pneumophila species. Proportions of L. anisa and L. pneumophila generally remained similar but increases in L. pneumophila during COVID-19 lockdown suggests static water supplies might favour its growth. Disinfection of hospital water systems was effective but re-colonization did occur, appearing to favour L. pneumophila, although L. anisa colony numbers also increased as a proportion of the total. While L. pneumophila remains the main species of concern as a risk to human health, L. anisa’s role should not be under-estimated, either as a potential infection risk or as an indicator of the need to intervene to control Legionella colonization of water supplies.

Materials based on platinum metals with very good catalytic activity were tested in the reduction of p–nitrophenol (pNP) to p–aminophenol (pAP). The majority of presented catalytic materials are based on the adsorption of p–nitrophenol on the surface of the catalyst simultaneously with molecular hydrogen, coming from sodium borohydride in an aqueous medium, which reduces it. In the present paper, a catalytic material based on osmium dispersed in n–decanol or n–dodecanol is presented, which also works as an emulsion membrane, for the absorption of p–nitrophenol and molecular hydrogen at the n–alcohol aqueous solution interface. The hydrogenation of p–nitrophenol is carried out in a reaction and separation column in which the acid receiving phase emulsion is dispersed in the osmium nanodispersion, in n–alcohols. This emulsion circulates from the base of the column to its upper part in co-current or counter-current with the source phase consisting of p–nitrophenol and sodium borohydride. Experiments show that the circulation of counter-current phases is superior to that in co-current, and the emulsion based on n–decanol is more efficient than the one based on n–dodecanol. The increase in the pH difference between the source and receiving phases leads to the increase in the conversion of p–nitrophenol to p–aminophenol. The efficiency of separation of the reaction product in the receiving phase is lower than the conversion at the same operating time. The apparent catalytic rate constant (kapp) of the new catalytic material based on the emulsion membrane with nanodispersion of osmium nanoparticles (0.1×10−3 for n–dodecanol and 0.9×10−3 for n-decanol) is lower by an order of magnitude compared to those based on adsorption on catalysts from platinum metal group. The advantage of the tested membrane catalytic material is that it extracts p–aminophenol in the acid receiving phase. The paper proposes a mechanism of the studied reduction system.

The market for shark fin soup, a fashionable, high-end Chinese dish, has resulted in intensive shark fishing across all oceans. At the same time, 90% of teleost fish stocks are over-exploited, making sharks the most lucrative target: fisheries that have not previously hunted them are now. As top and middle predators, sharks have high ecological value and poor capacity to withstand fishing mortality, but though their numbers are plummeting, the secretive nature of the fin trade, along with the difficulties of obtaining relevant data, obscure their true status. In consumer countries, shark fin is a luxury item and rich consumers are willing to pay high prices. There is little interest in sustainability or legal trade. Thus market demand will continue to fuel the search for sharks and those accessible to fishing fleets are increasingly endangered. Current legal protections are not working, as is clearly seen in the case of the shortfin mako. Claims that sharks can withstand such targeted, industrial hunting and be sustainably fished under these circumstances are shown to be misguided. In the interests of averting a catastrophic collapse across the planet’s aquatic ecosystems, sharks must be given effective protection. We recommend that all sharks, chimaeras, manta rays, devil rays, and rhino rays be protected from international trade through an immediate CITES Appendix I listing. However, a binding international agreement for protection, not only of sharks, but of the loss of biodiversity in general, is what is most needed to allow marine and fresh water ecosystems to recover.

1) Background: The influence of estrogen on cognitive and perceptual functions is debated. Some research suggests that estrogen increases arousal, improving cognitive function, while others propose that increased arousal might reduce performance on certain tasks. This study investigates the effects of menstrual cycle phase and estrogen levels on lightness perception in cycling women and hormonal contraceptive (HC) users. (2) Methods: Estrogen levels were determined from saliva samples collected at three sessions aligned with different menstrual phases in 16 women (9 with natural cycles, 7 HC users). The effects of wavelength and menstrual cycle phase on lightness perception were analyzed, followed by post-hoc comparisons and correlations between lightness perception and estrogen levels for both cycling women and HC users. (3) Results: Lightness varied by menstrual phase (MCP) in cycling women and was slightly higher during the low estrogen menstrual phase compared to peri-ovulation or luteal phases. In HC users, lightness measures were equivalent across phases. For cycling women, lightness was negatively correlated with estrogen for the green and green-yellow stimuli. There were no such associations among HC users. (4) Conclusions: This report challenges the concept that high estrogen phases of the menstrual cycle always positively influence perception. Conversely, the present results revealed that—at least in cycling, non-hormonal contraceptive users—lightness perception was both at a maximum during the low estrogen menstrual phase and negatively associated with estrogen levels across all tested wavelengths.

There is high confidence that climate change has increased the probability of concurrent temperature-precipitation extremes, changed their spatial-temporal variations, and affected the relationships between drivers of such natural hazards. However, the extent of such changes has been less investigated in Australia. Daily weather data (131 years, 1889-2019) at 700 grid cells (1◦ × 1◦) across Australia was obtained to calculate annual and seasonal mean daily maximum temperature (MMT) and total precipitation (TPR). A nonparametric multivariate copula framework was adopted to estimate the return period of compound hot-dry (CHD) events based on an ‘And’ hazard scenario (hotter than a threshold ‘And’ drier than a threshold). CHD extremes were defined as years with joint return periods of larger than 25 years. Mann-Kendall nonparametric tests was used to analyse trends in MMT and TPR as well as in the frequency of univariate and CHD extremes. A general cooling-wetting trend was observed over 1889-1989. Significant increasing trends were detected over 1990-2019 in the frequency and severity of hot extremes across the country while trends in dry extremes were mostly insignificant (and decreasing). Results showed a significant increase in the association between temperature and precipitation at various temporal scales. The frequency of CHD extremes was mostly stable over 1889-1989, but significantly increased between 1990 and 2019 at 44% of studied grid cells, mostly located in the north, south-east and south-west. Spatial homogeneity (i.e. connectedness) and propagation of extreme events from one grid cell to its neighbouring cells was investigated across Australia. It can be concluded that this connectedness has not significantly changed since 1889.

To account for the very low mass density associated with Dark Energy and the Cosmological Constant, a new approach to the ground state of empty space is presented. The resulting model for the vacuum state associated with empty space proposes a crystalline-like texture for the chromatic structure of empty space. This vacuum state has the appropriate mass density and predicts acceleration for the Universe expansion. Furthermore, the model predicts that this texture is anisotropic and may lead to measurable changes in the production of electron and positron pairs by gamma rays incident on a solid crystal of low mass density such as graphite.

In this paper, we introduce the (ρ,q)-analogue of the p-adic factorial function. By utilizing some properties of (ρ,q)-numbers, we obtain several new and interesting identities and formulas. We then construct the p-adic (ρ,q)-gamma function by means of the mentioned factorial function. We investigate several properties and relationships belonging to the foregoing gamma function, some of which are given for the case p = 2. We also derive more representations of the p-adic (ρ,q)-gamma function in general case. Moreover, we consider the p-adic (ρ,q)-Euler constant derived from the derivation of p-adic (ρ,q)-gamma function at x = 1. Furthermore, we provide a limit representation of aforementioned Euler constant based on (ρ,q)-numbers. Finally, we consider (ρ,q)-extension of the p-adic beta function via the p-adic (ρ,q)-gamma function and we then investigate various formulas and identities.

Accelerating, exact, explicit and simple solutions of relativistic hydrodynamics allow for a simple and natural description of highly relativistic p+p collisions. These solutions yield a finite rapidity distribution, thus they lead to an advanced estimate of the initial energy density of high energy collisions. We show that such an advanced estimate yields an initial energy density in $\sqrt{s}=7$ and 8 TeV p+p collisions at LHC around or above the critical energy density from lattice QCD, and a corresponding initial temperature above the critical temperature from QCD and the Hagedorn temperature. This suggests that the collision energy of the LHC corresponds to a large enough initial energy density to create a non-hadronic perfect fluid even in pp collisions. %We also show, that several times the %critical energy density may have been reached in high multiplicity events, hinting at a non-hadronic medium created in %high multiplicity $\sqrt{s}=7$ and 8 TeV p+p collisions.

It is increasingly common for experiments in biology and medicine to involve large numbers of hypothesis tests. A natural graphical method for visualizing these tests is to construct a histogram from the p-values of these tests. In this article, we examine the shapes, both normal and abnormal, that these histograms can take on, as well as present simple inferential procedures that help to interpret the shapes in terms of diagnosing potential problems with the experiment. We examine potential causes of these problems in detail, and discuss potential remedies. Throughout, examples of abnormal-looking p-value histograms are provided and based on case studies involving real biological experiments.

P versus NP is considered as one of the most fundamental open problems in computer science. This consists in knowing the answer of the following question: Is P equal to NP? It was essentially mentioned in 1955 from a letter written by John Nash to the United States National Security Agency. However, a precise statement of the P versus NP problem was introduced independently by Stephen Cook and Leonid Levin. Since that date, all efforts to find a proof for this problem have failed. Another major complexity class is NP-complete. It is well-known that P is equal to NP under the assumption of the existence of a polynomial time algorithm for some NP-complete. We show that the Monotone Weighted Xor 2-satisfiability problem (MWX2SAT) is NP-complete and P at the same time. Certainly, we make a polynomial time reduction from every directed graph and positive integer k in the K-CLOSURE problem to an instance of MWX2SAT. In this way, we show that MWX2SAT is also an NP-complete problem. Moreover, we create and implement a polynomial time algorithm which decides the instances of MWX2SAT. Consequently, we prove that P = NP.

A series of dinuclear copper(I) N,C,N- and P,C,P-carbodiphosphorane (CDP) complexes using multidentate ligands CDP(Py)2 (1) and (CDP(CH2PPh2)2 (13) have been isolated and characterized. Detailed structural information was gained by single crystal XRD analyses of nine representative examples. The common structural motive is the central double ylidic carbon atom with its characteristic two lone-pairs involved into binding of two geminal L-Cu(I) fragments at Cu-Cu distances in the range 2.55 – 2.67 Å. In order to enhance conformational rigidity within the characteristic Cu-C-Cu triangle, two types of chelating side arms were symmetrically attached to each phosphorus atom: two 2-pyridyl functions in ligand CDP(Py)2 (1) and its dinuclear copper complexes 2-9 and 11, as well as two diphenylphosphinomethylene functions in ligand CDP(CH2PPh2)2 (13) and its di- and mononuclear complexes 14-18. Neutral complexes were typically obtained via reaction of 1 with Cu(I) species CuCl, CuI, and CuSPh or via salt elimination reaction of [(CuCl)2(CDP(Py)2] (2) with sodium carbazolate. Cationic Cu(I) complexes were prepared upon treating 1 with two equivalents of [Cu(NCMe)4]PF6, followed by the addition of either two equivalent of an aryl phosphine (PPh3, P(C6H4OMe)3) or one equivalent of a bisphosphine ligands DPEPhos, XantPhos or dppf. For the first time carbodiphosphorane CDP(CH2PPh2)2 (13) could be isolated upon treating its precursor [CH(dppm)2]Cl (12) with NaNH2 in liquid NH3. A protonated and a deprotonated derivative of ligand 13 were prepared and their coordination was compared to neutral CDP ligand 13. NMR analysis and DFT calculations reveal, that the most stable tautomer of 13 does not show a CDP (or carbone) structure in its uncoordinated base form. For most of the prepared complexes, photoluminescence upon irradiation with UV light at room temperature was observed. Quantum yields (PL) were determined to 36% for dicationic [(CuPPh3)2(CDP(Py)2)](PF6)2 (4) and to 60% for neutral [(CuSPh)2(CDP(CH2PPh2)2] (16).

Western Iran barb species are scientifically, environmentally, and economically important. Some of them are the largest riverine freshwater species, which will grow in size and weight to 170 cm, and 120 kg respectively. Although these species are vulnerable, there is little information on taxonomy or environmental status of the species Luciobarbus barbulus is one of the important large species. In order to find the new record on the present status of large barb species sampling program carried out in western Iran, during the resent year since 2013 to now. This species overlaps in distinction with L. mystaceus, L scheich, and other similar species. In this study re-description of L.barbulus is given. This species differs from L. mystaceus in having thick and very wide fleshy lip, inferior mouth and slightly shorter head. In Luciobarbus barbulus head is more inferior. The details of differences between these species are given. This species is one of stable growing fish without dimorphism, retain its shape from a fingerling species to a giant fish.

Saturated lights appear brighter than white lights of the same luminance. This phenomenon is known as the Helmholtz-Kohlrausch (H-K) effect and can be estimated by modeling achromatic luminance and saturation to total brightness. These models have been shown to differ between women and men and are more variable in women. The variation in brightness models among women may be due to hormonal changes across the menstrual cycle. To test this, total brightness and achromatic luminance were measured across blue, green, yellow-green, yellow, and red hues. These data were measured along with salivary hormone levels for nine cycling women at points representing the menstrual, peri-ovulation, and luteal phases. These data were also collected for seven oral contraceptive (OC) users. There were no main effects of OC use nor menstrual cycle phase on B/L ratios, but ratios were higher for the red stimulus in cycling women than OC users. Red B/L ratios were also higher for cycling women than OC users during the luteal phase. Estrogen, progesterone, and their interaction predicted 18% of the variation in brightness for cycling women. These models could not be fit for OC users, and estrogen only accounted for 5% of brightness variance with progesterone terms omitted. These findings and potential mechanisms are discussed in the context of previous results.

Introduction: The current generation of 3D printers are lighter, cheaper, and smaller, making them more accessible to the chairside digital dentist than ever before. 3D printers in general in the industrial and chairside setting can work with various types of materials including, metals, ceramics, and polymers. Evidence presented in many studies show that an ideal material used for dental restorations is characterised by several properties related to durability, cost-effectiveness, and high performance. This review is the second part in a 3D Printing series that looks at the literature on material science and applications for these materials in 3D printing as well as a discussion on the potential further development and future evolution in 3D printing materials. Conclusions: Current materials in 3D printing provide a wide range of possibilities for providing more predictable workflows as well as improving efficiency through less wasteful additive manufacturing in CAD/CAM procedures. Incorporating a 3D printer and a digital workflow into a dental practice is challenging but the wide range of manufacturing options and materials available mean that the dentist should be well prepared to treat patients with a more predictable and cost effective treatment pathway. As 3D printing continues to become a commonplace addition to chair side dental clinics, the evolution of these materials, in particular reinforced PMMA, resin incorporating zirconia and glass reinforced polymers offer increased speed and improved aesthetics that will likely replace subtractive manufacturing milling machines for most procedures.

In the pursuit of better treatments, the concept of a chemically-active material, responding to local conditions by causing reactions, or reacting to produce substances that are deemed beneficial, seems laudable. Ultimately, the goal appears to be to recruit natural biological processes such that a natural ‘repair’ is effected. This goal seems to be the reason for prefixing “bio-“ to many terms with a view to advertising the desire, yet without presenting evidence that it has occurred, or indeed that it is capable of occurring, relying instead on non-biological processes to justify the claims. The dogma is such that all work where local ‘responsive’ chemistry is involved must receive the label “bioactive” to legitimize and promote. Nevertheless, the primary evidence adduced is flawed, and the claim must fail. A rethink to restore scientific sense and confidence in the endeavour is essential if real progress is to be made.

Colon cancer (CRC) is a prevalent malignancy that exhibits distinct differences in incidence, prognosis, and treatment responses between males and females. These disparities have long been attributed to hormonal differences, particularly the influence of estrogen signaling. This review aims to provide a comprehensive analysis of recent advances in our understanding of the molecular mechanisms underlying sex differences in colon cancer and the protective role of membrane and nuclear estrogen signaling in CRC development, progression, and therapeutic interventions. We discuss the epidemiological and molecular evidence supporting sex differences in colon cancer, followed by an exploration of the impact of estrogen in CRC through various genomic and non-genomic signaling pathways involving membrane and nuclear estrogen receptors. Furthermore, we examine the interplay between estrogen receptors and other signaling pathways, in particular the Wnt/-catenin proliferative pathway and hypoxia in shaping biological sex differences and estrogen protective actions in colon cancer. Lastly, we highlight the potential therapeutic implications of targeting estrogen signaling in the management of colon cancer and propose future research directions to address the current gaps in our understanding of this complex phenomenon.

Western Iran barb species are scientifically, environmentally, and economically important. Some of them are the largest riverine freshwater species, which will grow in size and weight to 170 cm, and 120 kg respectively. There is little information on taxonomy or environmental status of these species Luciobarbus barbulus is one of the important large species. During the resent year since 2013, in order to find the new record of large barb species, sampling program carried out in western Iran,. Luciobarbus barbulus briefly described by Heckel (1849) but during the time, have been synonymized with other related species or vice versa, other similar species miss-identically have been known as this species. Also the synonymy of Luciobarbus barbulus with L. pectoralis remains uncertain. The possible syntypes of L. barbulus in Vienna Museum (NMW 53957 and NMW 6596) are in too poor condition to be of any value, being mostly bones, and are dried, and. The fleshy lip of NMW 6596, (measures 119.3 mm standard length) fold of the original description could not be discerned, teeth are missing and the dorsal fin is broken off short. In 1997 this was the only syntype recognized. The catalog in Vienna lists only 1 fish, while Heckel's description refers to several fishes!. So designing of Lecotype and re-description of L. barbulus is essential. In this paper the details of description and differences between these species are given.

The main objective of this work is the assessment of the annual number of hospital admissions for respiratory disease (HARD) due to the exposure to in-healable particulate matter (PM10), within the greater Athens area (GAA), Greece. Towards this aim, the time series of the particulate matter with aerodynamic diameter less than 10μm (PM10) recorded in six monitoring stations located in the GAA, for a 13-year period 2001-2013, is used. Initially, a descriptive statistical treatment of PM10 concentrations took place. Furthermore, the AirQ2.2.3 software developed by the WHO was used to evaluate adverse health effects by PM10 in the GAA during the examined period. The results show that, during the examined period PM10 concentrations present a significant decreasing trend. Also, the mean annual HARD cases per 100,000 inhabitants ranged between 20 (suburban location) and 40 (city centre location). Approximately 70% of the annual HARD cases are due to city centre residents. In all examined locations, a declining trend in the annual number of HARD cases is appeared. Moreover, a strong relation between the annual number of HARD cases and the annual number of days exceeding the European Union daily PM10 threshold value was found.

Some peptide-based drugs including oxytocin, vasopressin, ziconotide, pramlintide, nesiritide, and octreotide, contain one intramolecular disulfide bonds. A novel and reusable monodispersed silica nanosphere-supported Pt(IV) complex (SiO2@TPEA@Pt(IV)) was synthesized via a four-step procedure and used for formation of intramolecular disulfide bonds in peptides. TEM and chemical mapping results for the Pt(II) intermediates and for SiO2@TPEA@Pt(IV) show that the silica nanospheres possess a monodisperse spherical structure and contain uniformly distributed Si, O, C, N, Cl, and Pt. The valence state of Pt on the silica nanospheres was characterized by XPS. The Pt(IV) loaded on SiO2@TPEA@Pt(IV) was 0.15 mmol/g, as determined by UV-vis spectrometry. Formation of intramolecular disulfides in six dithiol-containing peptides of variable lengths by use of SiO2@TPEA@Pt(IV) was investigated and the relative oxidation yields were determined by HPLC. In addition, peptide 1 (Ac-CPFC-NH2) was utilized to study the reusability of SiO2@TPEA@Pt(IV). No significant decrease in the relative oxidation yield was observed after ten reaction cycles. Moreover, the structure of SiO2@TPEA@Pt(IV) after being used ten cycles was determined to be similar to its initial one, demonstrating the cycling stability of the complex.

The application of graph theory in chemical and molecular structure research far exceeds people's expectations, and it has recently grown exponentially. In the molecular graph, atoms are represented by vertices and bonded by edges. In this report, we study the silicon-carbon Si₂C₃-I[p,q] and Si₂C₃-II[p,q]. We compute several Zagreb polynomials and Redefined Zagreb indices of these silicon-carbons.

Alcoholic liver disease (ALD) develops when the immunotolerant environment of the liver is compromised due to excessive alcohol consumption. ALD progression involves variations in the expression of multiple genes, resulting in liver inflammation and the development of a leaky gut. Molecular mechanism involved for ALD progression is still unclear, and due to that there are currently no FDA-approved drugs available for its treatment. In this study, the protective effects of Graphene oxide nanoparticles (GO) was investigated against ethanol-induced damage in the gut-liver axis in in vitro. GO was synthesized using a modified Hummer's method and characterization was done. Given the general concerns regarding nanoparticle toxicity, assessment of cell viability, lipid accumulation, DNA damage, cell death, and the generation of reactive oxygen species (ROS) were conducted using various techniques. Furthermore, gene expression of pro- and anti-inflammatory cytokines was done using RT-qPCR. The findings revealed that GOs promoted cell viability even against ethanol treatment. Additionally, lipid accumulation significantly decreased when cells were treated with GO alongside ethanol compared to ethanol treatment alone, with similar trends observed for other assays. Gene expression analysis indicated that GO treatment reduced the expression of proinflammatory cytokines while enhancing the expression of antioxidant genes. Moreover, GO treatment led to improvements in gut permeability and a reduction in proinflammatory cytokines in colon cells damaged by ethanol. These findings suggest that GO holds promise as a drug carrier, exhibiting no observed toxic effects. By shedding light on the protective effects of GO against ethanol-induced damage, this study contributes to the burgeoning field of nanoparticle-mediated therapy for ALD.

The increase in the frequency of droughts in Africa has increased the interest in crops with drought escape mechanisms like grain Amaranth (Amaranthus hypochondriacus). However, the white-seeded grain Amaranth is easily cross-pollinated by its black seeded wild relatives such as smooth pigweed (Amaranthus hybridus). A study to investigate a minimum isolation distance enough to prevent seed contamination study was carried out at three sites namely Gweru and Bindura (2020/2021 rainy season) and Shamva (2021/2022 rainy season). Smooth pigweed was planted at distances of 3 to 150 m from pure grain Amaranth. Close monitoring of phenology and measurement of meteorological conditions such as temperature, wind speed and direction were done during the anthesis period. Cross-pollination in grain Amaranth was influenced by distance from the pollen source. A maximum of 12.9 % contamination rate was measured within the 10 m radius from the pollen donor plot and a minimum outcrossing rate of 0.45 % was recorded at the widest distance of 150 m. It can be concluded that complete removal of wild relatives of grain Amaranth is important within the field at as far as 150 m from the crop.

Maxillomandibular advancement (MMA) is a surgical intervention that reduces the symptoms of obstructive sleep apnea via anterior repositioning of the upper and lower jaws. Pre-operative orthodontic alignment is often a critical component in aiding MMA. Orthodontia are important in intraoperative anchorage for intermaxillary fixation, healthy post-operative occlusion, and post-operative skeletal stability. Sequential clear aligners (SCA) refer to removable orthodontic appliances that are replaced at regular intervals to stimulate dental migration without the use of bonded hardware. These aligners have demonstrated efficacy in aiding orthognathic surgery for dentofacial deformities, which share some technical similarities with MMA for OSA. Here, we explore the treatment protocol for MMA followed by post-operative SCA treatment. Our experiences show that post-operative orthodontic treatment with SCAs results in similarly successful post-operative surgical outcomes given that the patient’s pre-operative occlusion is stable.

A theoretical framework for agricultural landscape pattern transitions in rural areas is proposed to fill the gap of current research with an empirical study in the Alabata farm settlement in Ogun State, Southwest Nigeria. Adopting the use of ArcGIS 10.8 and Surfer 27.3 to calculate the surface area and volume of the ground surface degraded and exposed to harsh weather conditions due to both natural and man-made anthropogenic activities causing runoffs and continuous soil erosion, which has affected agricultural production and sent some of the farmers packing and abandoning their farmlands. The farm settlement within the total sampled frame area of 1.50 km² covers a total distance of 5.11 km. The sample frame was divided into 36 frames with similar ecological terrain and soil types, which fell into either identified soil types 1 and 2. The study completed a questionnaire onsite using three major criteria. Only 23 farmers responded positively to the few questions with farmers either living on the farm or working as hired laborers on-site at the visit. The transition characteristics of agricultural landscape patterns as represented in abandoned land, and orchards are analyzed from a local perspective.

This study presents a novel Fe-CNs-P/S carbon composite material, synthesized by doping elements P and S into NH2-MIL-101 (Fe) using carbonization method. The material's application in sustainable water treatment was evaluated, focusing on its effectiveness in activating persulfate for pollutant degradation. The research thoroughly investigates the synthesis process, structural characteristics, and performance in degrading pollutants. Results indicate that Fe-CNs-P/S-5 with 50% P and S co-doping is higher than that of other samples, where the degradation rate of TC in 30min is as high as 98.11% under the optimum conditions, that is temperature at 25 ℃, 0.05 g/L of catalyst concentration, and 0.2 g/L of PMS concentration. The composite material demonstrates robust versatility and stability, maintaining high degradation efficiency across multiple organic pollutants, with no significant reduction in catalytic performance after four cycles. Furthermore, the free radical quenching experiments displays that the singlet oxygen 1O2 is the main active species. It is demonstrated that the doping of P and S play a role in the enhancement of PMS activation over the Fe-CNs-P/S catalyst. This material demonstrates remarkable efficacy in treating a range of organic contaminants and exhibits excellent reusability, presenting a promising approach for enhancing sustainability in water treatment applications.

K-band radar waves have high penetration and low attenuation coefficients. However, the wavelength of this radar wave is relatively short; thus, designing and preparing both broadband and wide-angle radar wave absorbers in this band presents considerable challenges. In this study, a resin-based K-band radar wave absorber with a biomimetic lotus leaf structure was designed and formed by UV curing. Here, microscale lotus leaf papillae and antireflection structures were prepared using a DLP 3D printer, and the contact angle between the material and water droplets was increased from 56° to 130°. In addition, the influence of the geometric parameters of the lotus leaf antireflection structure on the electromagnetic absorption performance and mechanical strength was investigated. After simulation optimization, the maximum electromagnetic loss of the lotus leaf structure 3D printed sample was −32.3 dB, and the electromagnetic loss was below −10 dB in the 20.8–26.5 GHz frequency range. When the radar incidence angle was 60°, the maximum electromagnetic loss was still less than −10 dB. The designed lotus leaf structure has a higher mechanical energy absorption per unit volume (337.22 KJ/m3) and per unit mass (0.55 KJ/Kg) than commonly used honeycomb lightweight structures during the elastic deformation stage, and we expect that the designed structure can be used as an effective lightweight material for K-band radar stealth.

The structure characterization of two new polysaccharides from Agrocybe aegerita (AA-P) and Hygrophorus olivaceoalbus (HO-P) by HPGPC, GC-MS, NMR and FT-IR indicated that AA-P was composed of Galactose, Glucose and Arabinose, in the ratio of 3:2:1. Its skeleton structure was consisted of (1→4)-Arap, (1→4,6)-Glup and (1→6)-Galp with one branched chain. The HO-P was consisted of mannose, galactose and glucose in a ratio of 1:1:2. Its skeleton structure was consisted of (1→6)-Galactose residues, (→1)-glucose residues, (1→4)-glucose residues and (1→4,6)-D-mannose residues. There were two branched chains connected to the main chain. AA-P and HO-P had the best stimulation effect on B cells and RAW264.7 cells, respectively, and could both mainly by impacting and reducing G0/G1 phase which lead to a significant proliferation of B cells, T cells and RAW264.7 cells. In addition, AA-P and HO-P could significantly promote the secretion of TNF-α from T cells, the secretion of IgA, IgD, IgE, IgG and IgM from B cells, and the secretion of TNF-α from RAW264.7 cells, but neither of them could impact the secretion of IL-1β from RAW264.7 cells.

The laser melting process (DED-LB-p) is used for the production of large components due to the high deposition rates. The large number of process parameters and printing strategies makes it difficult to optimize this process to achieve the optimal properties. Intensive post-processing is still the main obstacle to the widespread use of this process. In this work, the relationship between different printing strategies, printing strategies and process parameters on the microstructural, and tensile mechanical performance at room temperature is investigated. The porosity was measured in both printing directions. Grain orientation and size were analyzed by EBSD. A very low porosity of less than 0.4% was found in all printed samples. The samples printed with the optimized offset printing strategy show a significant improvement in tensile strength of 1000 MPa without heat treatment compared to other processing routes.

The normal growth and development of skeletal muscle is essential for the health of the body. The regulation of skeletal muscle by intestinal microorganisms and their metabolites has been continuously revealed. Acetate is the predominant short-chain fatty acid synthesized by gut microbiota through the fermentation of dietary fiber, however, the underlying molecular mechanisms governing the interaction between acetate and skeletal muscle during rapid growth stage remain to be further elucidated; Here, specific pathogen-free (SPF) mice, germ-free (GF) mice, and germ-free mice supplemented with sodium acetate (GS) were used to evaluate the effects of acetate on skeletal muscle growth and development of young mice with gut microbiota deficiency; We found the concentration of serum acetate, body mass gain, succinate dehydrogenase activity and expression of myogenesis maker gene of skeletal muscle in the GS group was higher than GF group following sodium acetate supplement. Furthermore, the transcriptome analysis revealed that acetate activated biological processes regulating skeletal muscle growth and development in GF group that are inhibited due to gut microbiota deficiency. In vitro experiment, we proved that acetate up-regulated Gm16062 to promote skeletal muscle cell differentiation; Overall, our findings proved that acetate promote skeletal muscle growth and development in young mice via increase Gm16062 expression.

The question does P = NP has confounded mathematicians and computer scientists alike for over 50 years and although there is an almost unanimous agreement that it in fact does not, there still is no absolute proof. In this paper, I attempt to prove to that P does not equal NP.

Glucagon-like peptide-1 (GLP-1) agonists are gaining attention as a potential treatment for obesity. While studies have shown that these medications greatly impact dietary habits, their relationship to consumer food waste is unexplored. We analyzed data from 505 U.S. consumers who self-report GLP-1 medication use and found that 25% agree that they waste more food since beginning the medication with 61% disagreeing with this statement. Respondents are less likely to agree with this statement if they have been on the medication a longer time and more likely to agree if they report experiencing nausea since beginning the medication. Several dietary changes are also significantly associated with self-reported changes in food waste since starting the medication. With previous literature finding GLP-1’s significant impact on individual food consumption and dietary choices, our findings suggest that the effects of this novel class of anti-obesity medications may cast a significant impact on food waste patterns. With the potential for widespread adoption of these medications, and given that approximately one-third of food in the United States is wasted by consumers, understanding the interaction of these two consumer trends is critical for projecting their joint impact on the food system.

Microfluidic devices which integrate both rapid mixing and liquid jetting for sample delivery are an emerging solution for studying molecular dynamics via X-ray diffraction. Here we use finite element modelling to investigate the efficiency and time-resolution achievable using microfluidic mixers within the parameter range required for producing stable liquid jets. Three-dimensional simulations, validated by experimental data, are used to determine the velocity and concentration distribution within these devices. The results show that by adopting a serpentine geometry, it is possible to induce chaotic mixing, which effectively reduces the time required to achieve a homogeneous mixture for sample delivery. Further, we investigate the effect of flow rate and the mixer microchannel size on the mixing efficiency and minimum time required for complete mixing of the two solutions whilst maintaining a stable jet. In general, we find that the smaller the cross-sectional area of the mixer microchannel, the shorter the time needed to achieve homogeneous mixing for a given flow rate. The results of these simulations will form the basis for optimised designs enabling the study of molecular dynamics occurring on millisecond timescales using integrated mix-and-inject microfluidic devices.

With the increasing use of genome sequencing as a surveillance tool for molecular epidemiology of antimicrobial resistance (AMR), databases and clear nomenclature for AMR gene families are critical. Due to the convoluted nomenclatural history of the integron-associated trimethoprim-resistant dihydrofolatereductase (dfr) gene family, we decided to conduct a literature review, comparative sequence analysis, and phylogenetic investigation of the dfr family, the results of which are presented here and available at the Comprehensive Antibiotic Resistance Database (CARD). Overall, literature review and phylogenetic analysis resolved gene name synonyms based on sequence. We recommend adoption of phylogenetic methods to help guide AMR gene naming efforts and relegation of misleading names to synonyms.

The European Union of Aquarium Curators (EUAC) includes 150 members and is an important association for the European public aquarium community. Since 2004, over one quarter of a million euros were awarded by the EUAC Conservation Fund to approximately 50 projects, which spanned across the globe. While projects varied greatly in content and scope, several achieved a significant impact in local populations and/or their focus species. This paper reports on results achieved by these conservation efforts and what improvements can be made, to ensure that the funding is indeed invested in conservation efforts per se. Perhaps the most valid conclusion to be drawn from the list of projects covered in this work is the fact that, regardless of the outcome, as far as preservation of the species are concerned, local communities were actively engaged in a subject that would, otherwise, remain unknown to them. Additionally, these EUAC funded projects highlight how public aquarium activities reach far beyond the acrylic panels surrounding the tanks and indeed the walls of the institution, as they spread around the world and raise awareness within local communities to preserve biodiversity. These results further suggest that a future direction for EUAC, as well as the public aquaria it consists of, could – indeed should - include more strenuous lobbying with legislating bodies, to ensure more adequate – and stronger – in situ conservation measures. In conclusion, with so many doubts being raised by different movements about the existence of aquaria and zoos, it is important that the public is aware that it is their visit to see the ambassadors of different species of animals that supports the funding of many of these pilot projects that aim to preserve species in their natural environment.

ABSTRACT Purpose: Tongue image analysis for disease diagnosis is an ancient traditional non-invasive diagnosis technique widely used by traditional medicine practitioners. Deep Learning based multi-label disease detection models offer tremendous potential to clinical decision support systems, by facilitating preliminary diagnosis. Methods: In this work, we propose a multi-label disease detection pipeline, where in observation and analysis of tongue images captured and received via smartphones assist in predicting the health status of an individual. All images are voluntarily given by subjects consulting collaborating physicians. Images thus acquired are first and foremost classified either into a diseased or a normal category by a 5-fold cross-validation algorithm using a convolution neural network (MobileNetV2) model for binary classification. Once the diseased label is predicted, the image is used to diagnose multiple diseases using the prediction algorithm based on DenseNet121. Results: Average accuracy of 93 % was achieved in classifying diseased from normal healthy tongue by detection model with MobileNetV2 architecture. Multilabel disease classification produced more than 90% accurate results for the seven class labels considered. Conclusion: AI based image analysis shows promising results and an extensive dataset could provide further improvements to this approach. Rather than employing high-cost sophisticated image capturing setup, experimenting with smartphone images opens opportunity to provide preliminary health status to individuals on smartphone prior to further line of treatment and diagnosis.

P-band radar remote sensing applied during the Airborne Microwave Observatory of Subcanopy and Subsurface (AirMOSS) mission has shown great potential for estimation of root zone soil moisture. When retrieving the soil moisture profile (SMP) from P-band radar, a mathematical function describing the vertical moisture distribution is required. Because only a limited number of observations are available, the number of free parameters of the mathematical model must not exceed the number of observed data. For example, a second order polynomial that contains 3 free parameters was presumed based on in-situ SMP data. The polynomial is currently parameterized based on 3 backscatter observations provided by AirMOSS (i.e. one frequency at three polarizations of HH, VV and HV). In this paper, a more realistic, physically-based SMP model containing 3 free parameters is derived based on a solution to Richards’ equation for unsaturated flow in soils. Evaluation of the new SMP model based on both numerical simulations and measured data revealed that it exhibits greater flexibility for fitting measured and simulated SMPs than the currently applied polynomial. It is also demonstrated that the new SMP model can be reduced to a second order polynomial at the expense of fitting accuracy.

The Mediterranean region offers good weather conditions for outdoor pig production (OPP), which is considered more environmentally friendly than intensive indoor production. However, the continuous input of food and pigs' excreta increases the soil organic matter (SOM) and phosphorus (P), increasing the risk of waterbodies eutrophication. This work aimed at evaluating in OPP areas soil P dynamics and the role of SOM on P sorption and P release. The experiment was done for two years, at an area of 2.8 ha with an animal charge of 9 adults ha-1. Georeferenced soil samples were taken at 0.20 m depth, and a soil P sorption experiment was carried out. At the end of the experiment, for the background value, the levels of SOM increased between 85–376%, and Olsen P values ranged between -82–884%. SOM levels above 2% caused a decrease in the binding energy of P sorption according to the linear model b=-15.541SOM+115.20 (p <0.01) as well as a decrease of the soil P sorption capacity Qmax=-41.272SOM+298.37 (p <0.01). To avoid the accumulation of SOM and P preventing hotspots for waterbodies eutrophication, an adequate animal charge together with soil cultivation for pig grazing can be a cost-effective practice.

Electric energy is one of the driving forces in every country. The supply of electrical energy continues to present various challenges, such as high costs associated with procuring raw materials for generation, sparsely populated areas that are not connected to the main grid, and the need for infrastructure to support generation and network delivery. These challenges have contributed to the growing adoption of renewable energy sources, particularly solar photovoltaics (PV).In this study, we have developed a practical method to assess the spatial PV potential in a selected urban area. The methodology combines data collected from an unmanned aerial vehicle (UAV) photogrammetry, Geographic Information System (GIS), and the energy output from three remote photovoltaic systems installed at different locations. The results obtained from this approach not only provide the energy generated per square meter, per year (kWh m-2 yr-1), but also provides a base to calculate the potential distance that electric cars could travel based on the energy generated. To illustrate the application of this method, two practical cases were selected: Senglea, Malta, and Munxar, Gozo. These examples highlight the versatility and effectiveness of our approach for evaluating and harnessing solar energy through photovoltaic panels in different contexts.

In the current study, we assessed the effects of conventional and Ultra High Dose Rate (UHDR) irradiation on behavioral and cognitive performance one month following exposure and assessed whether these effects were associated with alterations in the number of immune cells in the hippocampus using flow cytometry. Conventional- and UHDR-irradiated mice showed impaired novel object recognition. During fear learning, conventional- and UHDR-irradiated mice moved less during the inter-stimulus-interval (ISI) and UHDR-irradiated mice also moved less during the baseline period (prior to the first tone). In irradiated mice, reduced activity levels were also seen in the home cage; conventional- and UHDR-irradiated mice moved less during the light period and UHDR-irradiated mice moved less during the dark period. Following behavioral and cognitive testing, infiltrating immune cells in the hippocampus were analyzed by flow cytometry. The percent Ly6G+ CD45+ cells in the hippocampus was lower in conventional- and UHDR-irradiated than sham-irradiated mice, suggesting that neutrophils might be particularly sensitive to radiation. The percent of Ly6G+ CD45+ cells in the hippocampus was positively correlated with the time spent exploring the novel object in the object recognition test, suggesting that the reduced percent Ly6G+ CD45+ cells in the hippocampus might mediate some of the detrimental radiation-induced cognitive effects.

We provide quantitative results from GIS-based modelling of urban emission functions for a range of representative low- and mid-rise locations, ranging from individual streets to residential communities within cities as well as entire towns and city regions with the aim of whether lantern photometry or built environment has the dominant effect on light pollution. We demonstrate the scalability of our work by providing results for the largest urban area modelled to date, comprising the central 117 km2 area of Dublin City and containing nearly 42,000 public lights. Our results show a general similarity in the shape of the azimuthally-averaged emission function for all areas examined, with differences in total light output distribution depending primarily on the nature of the lighting and, to a smaller extent, on the obscuring environment including seasonal foliage effects. A comparison with global satellite observations shows that they are consistent with the deduced angular emission function for other low-rise areas worldwide. We further validate our approach by comparing results for a range of urban locations by the close agreement observed in a detailed comparison of with calibrated imagery from the International Space Station. To our knowledge, this is the first such detailed quantitative verification of light loss calculations.

For Sir Ronald Fisher, it is important to consistently obtain significant p-values to support an experimental hypothesis. So, replicating experiments to obtain independent p-values is a legitimate and desirable research practice. Several simple statistics have been proposed to meta-analyze p-values, all assuming that they are genuine, i.e. observations from independent standard Uniform random variables. But, as publication bias favors the studies that report "significant" p-values, when a p&gt;0.05 is obtained for the outcome of an experiment, some researchers will "fall into temptation" and decide to replicate the experiment in the hope of getting a smaller second p-value, ideally a significant one. Consequently, if the smallest of two p-values is reported, this is a Beta(1,2) distributed "fake" p-value, not a uniformly distributed genuine p-value. This is an unacceptable scientific research practice, and moreover the detection of fake p-values is unpractical. Even when it is possible, the analytic results to accommodate their existence in combined tests are cumbersome. For an informed decision, inclusive when the presence of fake p-values in a sample of p-values to be meta-analyzed is probable, tables with simulated critical values for the usual combined testing are supplied. This will also allow comparisons to be made between several combined tests.

We prove the continuous non-Archimedean (resp. p-adic) Banach space and Hilbert space versions of non-Archimedean (resp. p-adic) Welch bounds proved by M. Krishna. We formulate continuous non-Archimedean and p-adic functional Zauner conjectures.

We prove the non-Archimedean (resp. p-adic) Banach space version of non-Archimedean (resp. p-adic) Welch bounds recently obtained by M. Krishna. More precisely, we prove following results. \begin{enumerate}[\upshape(i)] \item Let $\mathbb{K}$ be a non-Archimedean (complete) valued field satisfying $\left|\sum_{j=1}^{n}\lambda_j^2\right|=\max_{1\leq j \leq n}|\lambda_j|^2$ for all $ \lambda_j \in \mathbb{K}, 1\leq j \leq n$, for all $n \in \mathbb{N}.$ Let $\mathcal{X}$ be a $d$-dimensional non-Archimedean Banach space over $\mathbb{K}$. If $\{\tau_j\}_{j=1}^n$ is any collection in $\mathcal{X}$ and $\{f_j\}_{j=1}^n$ is any collection in $\mathcal{X}^*$ (dual of $\mathcal{X}$) satisfying $f_j(\tau_j) =1$ for all $1\leq j \leq n$ and the operator $S_{f, \tau} : \text{Sym}^m(\mathcal{X})\ni x \mapsto \sum_{j=1}^nf_j^{\otimes m}(x)\tau_j^{\otimes m} \in \text{Sym}^m(\mathcal{X})$, is diagonalizable, then \begin{align}\label{NONFUNCTIONALWELCH} \max_{1\leq j,k \leq n, j \neq k}\{|n|, |f_j(\tau_k)f_k(\tau_j)|^{m} \}\geq \frac{|n|^2}{\left|{d+m-1 \choose m}\right| }. \end{align} We call Inequality (\ref{NONFUNCTIONALWELCH}) as non-Archimedean functional Welch bounds. \item For a prime $p$, let $\mathbb{Q}_p$ be the p-adic number field. Let $\mathcal{X}$ be a $d$-dimensional p-adic Banach space over $\mathbb{Q}_p$. If $\{\tau_j\}_{j=1}^n$ is any collection in $\mathcal{X}$ and $\{f_j\}_{j=1}^n$ is any collection in $\mathcal{X}^*$ (dual of $\mathcal{X}$) satisfying $f_j(\tau_j) =1$ for all $1\leq j \leq n$ and there exists $b \in \mathbb{Q}_p$ such that $ \sum_{j=1}^{n}f_j^{\otimes m}(x) \tau_j^{\otimes m} =bx$ for all $ x \in \text{Sym}^m(\mathcal{X}),$ then \begin{align}\label{PADICFUNCTIONALWELCH} \max_{1\leq j,k \leq n, j \neq k}\{|n|, |f_j(\tau_k)f_k(\tau_j)|^{m} \}\geq \frac{|n|^2}{\left|{d+m-1 \choose m}\right| }. \end{align} We call Inequality (\ref{PADICFUNCTIONALWELCH}) as p-adic functional Welch bounds. \end{enumerate} We formulate non-Archimedean functional and p-adic functional Zauner conjectures.

Oleuropein, glycosylated secoiridoid present in olive leaves is known to be an important antioxidant phenolic compound. We studied the antioxidant effect of low doses of oleuropein aglycone (3,4-DHPEA-EA) and oleuropein aglycone peracetylated (3,4-DHPEA-EA(P)) in murine C2C12 myocytes treated with hydrogen peroxide (H2O2). Both compounds were used at a concentration of 10 μM and were able to inhibit cell death induced by the H2O2 treatment, with 3,4-DHPEA-EA(P) being more. Under our experimental conditions, H2O2 efficiently induced the phosphorylated-active form of JNK and of its downstream target c-Jun. We demonstrated, by Western blot analysis, that 3,4-DHPEA-EA(P) was efficient in inhibiting the phospho-active form of JNK. This data suggests that the growth arrest and cell death of C2C12 proceeds via the JNK/c-Jun pathway. Moreover, we demonstrated that 3,4-DHPEA-EA(P) affects the myogenesis of C2C12 cells; because MyoD mRNA levels and the differentiation process are restored with 3,4-DHPEA-EA(P) after treatment. Overall, the results indicate that 3,4-DHPEA-EA(P) prevents ROS-mediated degenerative process in a genomic and epigenomic manner by functioning as an efficient antioxidant.

Oleuropein, glycosylated secoiridoid present in olive leaves is known to be an important antioxidant phenolic compound. We studied the antioxidant effect of low doses of oleuropein aglycone (3,4-DHPEA-EA) and oleuropein aglycone peracetylated (3,4-DHPEA-EA(P)) in murine C2C12 myocytes treated with hydrogen peroxide (H2O2). Both compounds were used at a concentration of 10 μM and were able to inhibit cell death induced by the H2O2 treatment, with 3,4-DHPEA-EA(P) being more. Under our experimental conditions, H2O2 efficiently induced the phosphorylated-active form of JNK and of its downstream target c-Jun. We demonstrated, by Western blot analysis, that 3,4-DHPEA-EA(P) was efficient in inhibiting the phospho-active form of JNK. This data suggests that the growth arrest and cell death of C2C12 proceeds via the JNK/c-Jun pathway. Moreover, we demonstrated that 3,4-DHPEA-EA(P) affects the myogenesis of C2C12 cells; because MyoD mRNA levels and the differentiation process are restored with 3,4-DHPEA-EA(P) after treatment. Overall, the results indicate that 3,4-DHPEA-EA(P) prevents ROS-mediated degenerative process in a genomic and epigenomic manner by functioning as an efficient antioxidant.

The application of graph theory in chemical and molecular structure research far exceeds people's expectations, and it has recently grown exponentially. In the molecular graph, atoms are represented by vertices and bonded by edges. Closed forms of multiplicative degree-based topological indices which are numerical parameters of the structure and determine physico-chemical properties of the concerned molecular compound. In this article, we compute and analyze many multiplicative degree-based topological indices of silicon-carbon Si₂C₃-I[p,q] and Si₂C₃-II[p,q].

This paper assessed rice farmers' perceptions of agricultural and irrigation practices through their choices. A survey was carried out among 278 rice farmers on five irrigation schemes in three agro-ecological zones of Togo, viz. the savannah region, the forest region and the coastal region. The sample of random respondents was selected from a list of rice farmers provided by the managers of these irrigated schemes. Data collected through face-to-face interviews using kobocollect software were analyzed with R 4.2 software, and the Pearson test was validated at the 5% level. The results showed that the socio-economic characteristics of the rice growers, such as access to agricultural credit, experience, non-agricultural activities, membership of a rice growers' cooperative, gender, level of education and training in growing irrigated rice, and farm labor, significantly influenced the choice of agronomic practices and irrigation management. Characteristics such as experience, training and hired farm labor enhanced paddy yields, while access to agricultural credit was unproductive. Chemical clearing combined with stump removal, tiller ploughing, transplanting and high plant density are the agricultural practices that increased paddy yields, while tiller mudding and basal mineral fertilization were inefficient. In the same way, water distribution by demand, water depth above the soil of less than 5 cm, use of water-saving technologies and farmer's knowledge of how to improve water and fertilizer use-efficiency also helped to boost paddy yields. For sustainable rice production in the context of labor shortages and the financial resources required, future studies will focus on the effectiveness of motorized mudding and agricultural credits for rice farmers. Furthermore, considering the crucial role of training in the adopting of good agricultural and irrigation practices, future research will study strategies for wide diffusion of knowledge to rice producers.

Organic electrophoretic coatings have gained significant attention due to their ability to provide a uniform and controlled coating thickness, high coating adhesion, and excellent corrosion protection properties. In this work, to investigate the aging behaviors of an organic electrophoretic coating for magnesium alloys, water absorption kinetics curves of the coatings after immersion in 3.5 wt.% NaCl at 20℃ and 40℃ were measured, and parameters such as the saturated water absorption and saturation time of the free film coatings were fitted to determine the densification evolution of the organic coatings. A tensile test was used to test the tensile strength of the organic coating during service to determine the evolution of the strength and toughness of the organic coating. The evolution of wet adhesion of organic coatings with service time was tested by ASTM D4541-02. The impedance spectra of the organic coatings under the above conditions were detected by EIS, and finally, the failure behavior of the organic coatings under immersion was analyzed.

This paper explores the tuning and results of two-part models on rich datasets provided through the Casualty Actuarial Society (CAS). These data sets include BI (bodily injury), PD (property damage) and COLL (collision) coverage, each documenting policy characteristics and claims across a four year period. The datasets are explored, including summaries of all variables, then the methods for modeling are set forth. Models are tuned and the tuning results are displayed, after which we train the final models and seek to explain select predictions. All of the code will be made available on GitHub. Data was provided by a private insurance carrier to the CAS after anonymizing the data set. This data is available to actuarial researchers for well-defined research projects that have universal benefit to the insurance industry and the public. Our hope is that the methods demonstrated here can be a good foundation for future ratemaking models to be developed and tested more efficiently.

Buprenorphine, an analogue of thebaine, is a Schedule III opioid in the United States used for opioid-use disorder and as an analgesic. Research has shown drugs like buprenorphine have a complicated pharmacology with characteristics that challenge traditional definitions of terms like agonist, antagonist, and efficacy. Buprenorphine has a high affinity for the mu (MOR), delta (DOR), kappa (KOR), and intermediate for the nociceptin opioid receptors (NOR). Buprenorphine is generally described as a partial MOR agonist with limited activity and decreased response at the mu-receptor relative to full agonists. In opioid naïve patients, the drug’s analgesic efficacy is equivalent to a full MOR agonist, despite decreased receptor occupancy and the “ceiling effect” produced from larger doses. Some argue buprenorphine’s effects depend on the endpoint measured, as it functions as a partial agonist for respiratory depression, but a full-agonist for pain. Buprenorphine’s active metabolite, norbuprenorphine, attenuates buprenorphine's analgesic effects due to NOR binding and respiratory depressant effects. The method of administration impacts efficacy and tolerance when administered for analgesia. There have been eleven-thousand reports involving buprenorphine and minors (age < 19) to US poison control centers, the preponderance (89.2%) with children. The consequences of prenatal buprenorphine exposure in experimental animals and humans should continue to be carefully evaluated. In conclusion, buprenorphine’s characterization as only a partial mu-agonist is an oversimplification. Contemporary research shows the traditional explanation of the pharmacology of buprenorphine does not take into account changes to receptor theory, pharmacological terminology, route of administration, and biologically active major metabolites.

Fatty acids play a major role in determining membrane biophysical properties. Staphylococcus aureus produces branched-chain fatty acids (BCFAs) and straight-chain fatty acids (SCFAs), and can incorporate exogenous SCFAs and straight-chain unsaturated fatty acids (SCUFAs). Many S. aureus strains produce the triterpenoid pigment staphyloxanthin, and the balance of BCFAs, SCFAs and staphyloxanthin determines membrane fluidity. Here, we investigated the relationship of fatty acid and carotenoid production in S. aureus using a pigmented strain (Pig1), its carotenoid-deficient mutant (Pig1ΔcrtM) and the naturally non-pigmented Staphylococcus argenteus that lacks carotenoid biosynthesis genes and is closely related to S. aureus. Fatty acid compositions in all strains were similar under a given condition indicating that staphyloxanthin does not influence fatty acid composition. Strain Pig1 had decreased membrane fluidity as measured by fluorescence anisotropy than the other strains under all conditions indicating that staphyloxanthin helps maintain membrane rigidity. We could find no evidence for correlation of expression of crtM and fatty acid biosynthesis genes. Supplementation of medium with glucose increased SCFA production and decreased BCFA and staphyloxanthin production, whereas acetate-supplementation also decreased BCFAs but increased staphyloxanthin production. We believe that staphyloxanthin levels are influenced more through metabolic regulation than responding to fatty acids incorporated into the membrane.

Oleuropein, glycosylated secoiridoid present in the olive leaves, is known as an important antioxidant phenolic compound. We studied the antioxidant effect of low dose of oleuropein aglycone (3,4-DHPEA-EA) and oleuropein aglycone peracetylated (3,4-DHPEA-EA(P)) in murine C2C12 myocytes treated with hydrogen peroxide (H2O2). Both compounds were used at a concentration of 10 μM and were able to inhibit cell death induced by H2O2 treatment, with 3,4-DHPEA-EA(P) being more. Under our experimental conditions H2O2 efficiently induced the phosphorylated-active form of JNK and of its downstream target c-Jun. We demonstrated, by Western blot analysis, that 3,4-DHPEA-EA(P) was efficient in inhibiting the phospho-active form of JNK. This data suggest that growth arrest and cell dead of C2C12 proceeds via the JNK/c-Jun pathway. Moreover, we demonstrated that 3,4-DHPEA-EA(P) affects myogenesis of C2C12 cells; because the MyoD mRNA levels and the differentiation process are restored after treatment with 3,4-DHPEA-EA(P). Overall, the results indicate that 3,4-DHPEA-EA(P) prevents ROS-mediated degenerative process by functioning as an efficient antioxidant.

This randomized control trial aims to test the hypothesis that twice-daily nurse-administered saline enema(SE) is comparable to physician-administrated SE in very low birth weight infants (VLBW) with meconium obstruction of prematurity (MOP). MOP is defined as no bowel opening for 48 h, and treatment failure is defined as the need for additional intervention and safety. Twice-daily SE was administered by accredited nurses, surgeons/neonatologists using standardized protocols. The outcomes were comparability of nurse to physician-administered SE in terms of frequency of administration, catheter insertion length and volume of enema, daily maximum meconium output, and treatment failure, defined as the need for additional intervention. Safety outcomes were evaluated. Twenty-eight infants were managed with SE. 389 SE were administered, 96 and 293 in 750-999g and 1000-1500g birth weight groups, respectively. Nurses administered 72.9% and 81.5% of SE in 750-999g and 1000-1500g birth weight groups, respectively. Physicians performed the rest of the SE. Daily meconium output was comparable in nurse and physician-administered SE in both groups. There were no treatment failures or adverse events in both SE group. SE administered by nurses was found to be comparable in terms of safety, efficacy, and frequency of administration to that of physician-administered SE.

The lack of reliable rainfall projection records remains a major challenge to Uganda. In the advent of extreme wetness or drought events, reliable rainfall estimates for local planning and adaptation are essential. The present study used two main datasets to conduct a historical analysis from 1981 to 2019, coupled with future projections under representative concentration pathway (RCP 8.5) for the period 2020-2050. Historical analysis revealed bimodal annual rainfall pattern for March-May (MAM) and September-November (SON) gradients representing heavier to lighter rainfall events respectively over the study area. Investigation of recent trends in rainfall patterns revealed an upward trend from 2010 onwards in annual and seasonal rainfall. Moreover, results for future projections show wet conditions are projected to occur over the study area between the months of April/May and October. Contrarily, March is likely to experience a reduction in wet conditions. Mann-Kendall test employed to make future projections of rainfall depicted decreasing patterns during MAM season whilst increasing tendencies with strong shift was highlighted for SON season over the study region. Meanwhile, annual projections indicate huge variations with linear trends showing a marginal increase as compared to historical trends. Findings would serve as baseline print to propel further studies that could delve into impact analysis of drought extreme events which pose significant threats to the agricultural sector which is heavily reliant on rainfall.

The effectiveness of a hybrid technique for identifying seismic damage in planar, multistory, steel X or V-braced frames is demonstrated here through an example of a six-story frame. This proposed technique, referred to as “M and P”, combines the instrumental Monitoring (M) with Pushover analysis (P). According to the methodology, the diagram of stepping eigenfrequencies of the frame in the inelastic region is initially plotted against seismic roof displacement. The fundamental natural frequency detected via the monitoring process is then utilized in this key diagram to reveal the inelastic roof displacement that corresponds to the damage state of the steel braced frame. This displacement is subsequently used as the target in the pushover analysis, facilitating the identification of seismic damage in the existing steel braced frame. Finally, the damage image is correlated with the damage stiffness matrix of the frame at the same inelastic roof displacement. The investigation results indicate that combining instrumental monitoring with pushover analysis enables accurate identification of seismic damage potential in existing steel braced frames.

Low back pain (LBP) is a common musculoskeletal complaint that can impede physical function and mobility. Current management often involves pain medication, but there is a need for non-pharmacological and non-invasive interventions. Soft tissue manipulation (STM) such as massage has been shown to be effective in human subjects, but the molecular mechanisms underlying these findings are not well understood. In this paper, we evaluated potential changes in soft tissue levels of more than thirty pro- or anti-inflammatory cytokines following instrument-assisted STM (IASTM) in rats with chronic, induced LBP using Complete Freund’s Adjuvant. Our results indicate that IASTM is associated with reduced soft tissue levels of RANTES/CCL5 and increased soft tissue levels of IL-4, which are pro-inflammatory and anti-inflammatory factors, respectively, by 120 minutes post-treatment. IASTM was not associated with tissue-level changes in CXCL5/LIX (the murine homologue of IL-8), CXCL7, GM-CSF ICAM-1, IL1-ra, IL-6, IP-10/CXCL10, L-selectin, TNF-α, or VEGF at either 30- or 120 minutes post-treatment. Combined, our findings suggest that IASTM exerts tissue-level effects that are associated with improved clinical outcomes and potentially beneficial changes in pro/anti-inflammatory cytokines in circulation and at the tissue level.

We evaluated the potential of using fish species and functional traits as indicators of land use impacts to fish assemblages. We used environmental data collected at multiple spatial scales (local, reach, and upstream catchment) for 19 tributary and main stem sites in the Nolichucky River watershed in Tennessee. Canonical correspondence analyses showed that temperature, elevation, specific conductivity, sediment yield, impervious surfaces, and row crop cover at the catchment scale were strongly associated with fish assemblage structure, as well as forest cover from all three spatial scales. Blocked indicator species analysis, with stream size as the block, showed that significantly strong indicators of the least-impacted riparian land use condition (≥60% forest cover) were Saffron Shiner (Notropis rubricroceus), Rainbow Trout (Oncorhyncus mykiss), Longnose Dace (Rhynichthys cataractae), Creek Chub (Semotilus atromaculatus), and Mottled Sculpin (Cottus bairdi). Traits indicative of the least-impacted sites were the herbivorous trophic guild, mean female age-at-maturity, longevity, rock-gravel spawners, montane geology and pelagic swimmers. Specific conductivity was strongly related to multiple catchment-scale land use variables, and was a strong local-scale influence on fish assemblage structure. Our results show promise for using a relatively common but endemic southern Appalachian fish species, the Saffron Shiner, as an indicator for land-use related impacts to these streams.

Terrestrial orchid tubers are an important source of food in some parts of Africa and are traditionally included in the diets of most rural communities in Malawi. However, there is limited information on the nutritional and phytochemical content of the Malawian orchids to substantiate their traditional use. The present study evaluates the nutritional and phytochemical variation of four orchid species: Disa zombica, Satyrium buchananii, Satyrium carsonii, and Satyrium trinerve, collected from the same ecological zone of Malawi. The proximate content, minerals, phytochemicals, and functional properties were analysed using official procedures. Protein ranged from 2.19% to 4.65%, whereas carbohydrate ranged from 65.24% to 80.22%, with S. carsonii and S. trinerve registering the highest protein and carbohydrate contents, respectively. Iron and potassium were highest in D. zombica, while sodium and calcium were highest in S. buchananii. The total phenolics ranged from 228.56 to 500.00 mg GAE/100 g, with D. zombica registering the highest. The water absorption capacity ranged from 4.10 to 10.88 g/g. Albeit variable levels, the study provides evidence that orchid species contain essential nutrients and phytochemicals important for human nutrition and health. Furthermore, the functional properties can be utilised in the development of food products, such as baked products.

Noise in requirements has been known to be a defect in software requirements specifications (SRS). Detecting defects at an early stage is crucial in the process of software development. Noise can be in the form of irrelevant requirements that are included within a SRS. A previous study had attempted to detect noise in SRS, in which noise was considered as an outlier. However, the resulting method only demonstrated a moderate reliability due to the overshadowing of unique actor words by unique action words in the topic-word distribution. In this study, we propose a framework to identify irrelevant requirements based on the MultiPhiLDA method. The proposed framework distinguishes the topic-word distribution of actor words and action words as two separate topic-word distributions with two multinomial probability functions. Weights are used to maintain a proportional contribution of actor and action words. We also explore the use of two outlier detection methods, namely Percentile-based Outlier Detection (PBOD) and Angle-based Outlier Detection (ABOD), to distinguish irrelevant requirements from relevant requirements. The experimental results show that the proposed framework was able to exhibit better performance than previous methods. Furthermore, the use of the combination of ABOD as the outlier detection method and topic coherence as the estimation approach to determine the optimal number of topics and iterations in the proposed framework outperformed the other combinations and obtained sensitivity, specificity, F1-score, and G-mean values of 0.59, 0.65, 0.62, and 0.62, respectively.

Gas sensor arrays, also known as electronic noses, leverage a diverse set of materials to identify the components of complex gas mixtures. Metal-organic frameworks (MOFs) have emerged as promising materials for electronic noses due to their high-surface areas and chemical as well as structural tunability. Using our recently reported genetic algorithm design approach, we examined a set of 50 MOFs and searched through the over 1.125x1015 unique array combinations to identify optimal arrays for the detection of CO₂ in air. We found that despite individual MOFs having lower selectivity for O2 or N2 relative to CO₂, intelligently selecting the right combinations of MOFs enabled accurate prediction of the concentrations of all components in the mixture (i.e. CO₂, O₂, N₂). We also analyzed the physical properties of the elements in the arrays to develop an intuition for improving array design. Notably, we find that diversity among the surface areas in the MOFs leads to improved sensing. Consistent with the observation, we found that, as one might expect, the best arrays consistently had more structural diversity than the worst arrays.

The African continent has the highest prevalence of hypertension globally, with South Africa reporting the highest prevalence in Southern Africa. While the influence of genetic variability in the pathogenesis of hypertension is well described internationally, limited reports are available for African populations. This study aimed to assess the association of genetic variants and essential hypertension in a cohort of two ethnic South African population groups. Two hundred and seventy-seven hypertensive and one hundred and seventy-six normotensive individuals were genotyped for 79 variants. Genotyping was performed using the Illumina GoldenGate Assay and allele-specific polymerase chain reaction. The association of variants was assessed using the Fisher Exact test under the additive and allelic genetic models, while multivariate logistic regression was used to predict the development of hypertension. Five variants (CYP11B2 rs179998, AGT rs5051 and rs699, AGTR1 rs5186 and ACE rs4646994) were significantly associated with essential hypertension in the cohort under study. Furthermore, AGTR1 rs5186 and AGT rs699 were identified as risk factors for the development of hypertension in both ethnic groups. In two ethnic South African populations an association was observed between Renin-Angiotensin-Aldosterone System (RAAS) related genes and the development of hypertension.

The notion of Golden structure was introduced 15 years ago by the present authors and know a constant interest by several geometers. Now, we propose a new generalization apart of that called metallic structure and considered also by the authors. By adding a compatible Riemannian metric we focus on the study of submanifolds in this setting.

In the present paper, we introduce (p, q)-extension of Apostol type Frobenius-Euler polynomials and numbers and investigate some basic identities and properties for these polynomials and numbers, including addition theorems, difference equations, derivative properties, recurrence relations and so on. Then, we provide integral representations, explicit formulas and relations for these polynomials and numbers. Moreover, we discover (p, q)-extensions of Carlitz's result [L. Carlitz, Mat. Mag., 32 (1959), 247–260] and Srivastava and Pintér addition theorems in [H. M. Srivastava, A. Pinter, Appl. Math. Lett., 17 (2004), 375–380].

Alginate-gelatin hydrogels are extensively used in bioengineering. However, despite different formulations being utilized for growing different cell types in vitro, their pH and its effect, together with the crosslinking ions, of those formulations are still infrequently assessed. In this work we studied how these elements can affect hydrogel stability and printability and influence U2OS and NIH/3T3 cell viability and metabolism on the resulting 3D prints. In this context, 6% alginate + 2% gelatin hydrogels were prepared with 0.1 M MES buffer with pH 5.5, 6.5, 7.0 or 8.0, printed by extrusion-based 3D printing, and crosslinked immediately after printing with either CaCl2 or BaCl2. Our results showed that both the buffer pH and the crosslinking ion (Ca2+ or Ba2+) influence the swelling and degradation rates of the prints. Moreover, the buffer pH influenced the printability of the hydrogel in air, but when printed directly in a fluid-phase CaCl2 or BaCl2 crosslinking bath. In addition, both U2OS and NIH/3T3 cells showed greater cell metabolic activity on one-layer prints crosslinked with Ca2+. Besides, Ba2+ increased cell death of NIH/3T3 cells while had no effect on the U2OS cell viability. The pH of the buffer also caused an important impact on the cell behaviour. U2OS cells showed a 2.25-fold cell metabolism increase on one-layer prints prepared at pH 8.0 in comparison to those prepared at pH 5.5. Whereas, NIH/3T3 cells showed greater metabolism on one-layer prints with pH 7.0. Finally, we observed a difference on cell arrangement of the U2OS cells growing on prints prepared from hydrogels with acidic buffer in comparison to cells growing on those prepared using neutral or basic buffer. These results show that both pH and crosslinking ion influence hydrogel strength and cell behaviour.

Low pasture biomass production and fodder scarcity are among the major challenges affecting productivity of dairy cattle farms in Sri Lanka. As a potential solution to this, two Napier hybrid cultivars CO-5 and Sampoorna were recently introduced and a field experiment was conducted to evaluate their growth, dry matter production and nutritional composition during May to September 2020. Plant measurements and samples were collected at five harvest intervals (4, 6, 8, 10 and 12 weeks after planting), with the plant samples subjected to biomass and nutritional assessments. The number of tillers and leaf length differed (P=0.01) between the two cultivars at 4 weeks harvesting interval (HI) whilst number of leaves differed at 12 HI respectively. Dry matter yield increased (P=0.16) almost linearly whilst crude protein declined exponentially with CO-5 greater than Sampoorna (P=0.057; 9.3% vs 8.7%), with increasing harvesting intervals respectively. In-vitro Organic Matter Digestibility and In-vitro Metabolizable Energy contents were similar across weeks 4, 6 and 8 but then decreased. This study demonstrates that higher dry matter yields (12.54 t/ha) can be obtained by harvesting both cultivars at 12 HI, but from a nutritional perspective harvesting at 6 HI during Yala season of the year would be optimum for farmers.