The introduction on Zinc oxide nanoparticles (ZnOn) in sunscreens solved the issue of poor spreadability of these formulations, which often left a white film on the skin. However, safety concerns have arisen regarding the topical application of ZnOn. Some studies employed commercial sunscreens to address the safety issues of the topical application of ZnOn; however, commercial formulations are often complex and contain a wide range of ingredients that could attenuate the potential damage caused by the ZnOn. Therefore, in this study we aimed to develop a simple stable formulation containing 20% of coated and uncoated ZnOn, characterize the formulations and the nanoparticles, and assess the skin penetration in Franz diffusion cell. The Feret's diameter for the uncoated and coated ZnOn was 137 nm and 134 nm, respectively. For the uncoated ZnOn the hydrodynamic size in water was 368 nm and for the coated ZnOn, the average hydrodynamic size in ethyl acetate was 135 nm. The incorporation of ZnOn led to formulations more consistent and easier to spread, as suggested by the lower work of shear and higher values of firmness, cohesiveness, consistency and index of viscosity compared with the vehicle. The stability assessment at 45ºC suggested that the formulations containing the ZnOn were stable for 30 days and the vehicle was stable for 90 days. The assessment off the skin penetration by reflectance confocal laser microscopy indicated that the formulations did not permeate into the deepest layers of the skin, but accumulated on the skin furrows, hair and hair follicle.

The epidemiological and clinical pathological aspects of polioencephalomalacia (PEM) in five buffaloes (buffaloes 01 to 05) in the amazon biome are described. Epidemiological data were obtained during the clinical visit in which the animals with clinical signs compatible with polioencephalomalacia were submitted to a general and specific clinical examination of the nervous system. During the necropsy of the five animals, the intensity and location of the lesions were evaluated and fragments from different organs were collected and fixed in 10% buffered formalin and sent to the Pathological Anatomy Sector of the Federal Rural University of Rio de Janeiro for histopathological examination. Of the five studied animals, all were of the Murrah breed, four male and one female, with ages ranging from two months to one year. Two buffaloes (buffalo 01 and 02) were from the municipality of Castanhal, Pará, kept in an extensive breeding system on Urochloa brizantha pasture. Buffaloes 03 and 04 belonged to a property located in the municipality of Cachoeira do Arari, Marajó Island, Pará, and buffalo 05 was from a property located in the municipality of Itaubal, state of Amapá, all of them were raised in an extensive system in flooded of native pasture. At the clinical examination, all buffaloes had a body score between 2.5 and 3 (scale from 1 to 5), and there was noted decreased alertness, postural changes, marked hypermetria when stimulated to move, total or partial blindness demonstrated by colliding to the corral structures, head pressing and circumduction of the hindquarters when supported on the forelimbs, opisthotonos, muscle tremors, convulsions, paddling movements, sialorrhea, decrease in palpebral and pupillary reflexes and eyeball rotation placing the pupillary slit in a vertical position. At necropsy, mild lesions characterized by edema and flattening of the cerebral convolutions were observed. Histopathological examination showed laminar necrosis of the cerebral cortex. The diagnosis of polioencephalomalacia was based on epidemiological, clinical-pathological, and histopathological findings, similar to findings in other ruminants. The cause of polioencephalomalacia in the studied buffaloes was not established, which indicates the need for further studies to elucidate this disease in the species, mainly in the Amazon region.

In this study, the use of recycled diatomaceous earth as the extraction phase in a the solid phase microextraction (SPME) technique for the determination of polycyclic aromatic hydrocarbons (PAHs) in river water samples, with separation/detection performed by gas chromatography-mass spectrometry (GC-MS), is proposed. The optimized extraction conditions are extraction time 70 min at 80 ºC with no addition of salt. The limits of quantification were close to 0.5 μg L-1 with RSD values lower than 25% (n = 3). The linear working range was 0.5 μg L-1 to 25 μg L-1 for all analytes. The method was applied to samples collected from the Itajaí River (Santa Catarina, Brazil) and the RSD values for repeatability and reproducibility were lower than 15% and 17%, respectively. The efficiency of the recycled diatomaceous earth fiber was compared with that of commercial fibers and good results were obtained, confirming that this is a promising option for use as the extraction phase in SPME.

This study aimed to characterize the risk of falling in low, moderate and high risk participants from two different geographical locations using a portable force-plate. A sample of 390 older adults from South and North America were matched for age, sex, height and weight. All participants performed a standardized balance assessment using a force plate. Participants were classified in low, moderate and high risk of falling. No differences were observed between South and North American men, nor comparing North American men and women. South American women showed the significantly shorter center of pressure path length compared to other groups. The majority of the sample was categorized as having low risk of falling (male: 65.69 % and female: 61.87 %), with no differences between men and women. Also, no differences were found between North vs. South Americans, nor for falls risk levels when male and female groups were compared separately. In conclusion, South American women had better balance compatible with the status of the 50-59 years’ normative age-range. The prevalence of low falls risk was ~ 61-65 % and the prevalence of moderate to high risk was ~ 16-19 %. The frequency of fall risk did not differ significantly between North and South Americans, nor between males and females.

Leishmaniasis remains a significant global health concern, with current treatments relying on outdated drugs associated with high toxicity, lengthy administration, elevated costs, and drug resistance. Consequently, the urgent need for safer and more effective therapeutic options in leishmaniasis treatment persists. Previous research has highlighted selenium compounds as promising candidates for innovative leishmaniasis therapy. In light of this, a library of 10 selenium-containing diverse compounds was designed and evaluated in this study. The compounds were subjected to screening against L. amazonensis promastigotes, and their cytotoxicity was assessed in NIH/3T3 cells. Among the tested compounds, MRK-106 and MRK-108 displayed the highest potency against L. amazonensis promastigotes while demonstrating reduced cytotoxicity. Notably, MRK-106 and MRK-108 exhibited IC50 values of 3.97 µM, 4.23 µM, respectively, and most of the tested compounds showed low cytotoxicity in NIH/3T3 cells (CC50 > 200 µM). Although these results are promising, additional investigations focusing on intracellular amastigotes are required to determine the antileishmanial activity of the compounds. In conclusion, the identified selenium-containing compounds hold considerable potential as antileishmanial drug candidates and warrant further exploration in subsequent studies. These findings represent a significant step towards the development of safer and more effective therapies for leishmaniasis, addressing the pressing need for novel and improved treatments.

.Halophyte species are rich in bioactive compounds, antioxidant, and antimicrobial properties. However, due to the limited tech-nical-scientific data regarding these properties in the halophyte Salicornia neei, this research aimed to analyze micronutrients, chlorophyll, carotenoids, and activities of S. neei extracts using solvents of different polarities and plant organs (leaf, stem, and root) as free radical scavengers and antimicrobial agents. The fresh plant was collected and subsequently, pigments and micro-nutrients were determined by spectrophotometry and ICP, respectively. From the prepared extracts, antioxidant activity was de-termined by the 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging method and antimicrobial activity by the disc diffusion method for fungi and bacteria. The results obtained demonstrated that the native Brazilian halophyte S. neei can be considered a food rich in minerals and pigments with excellent antioxidant properties, showing inhibition 96.72% and IC50 (4.15 mg/mL). For free radical scavenging capacity, the most effective solvent was ethanol: acetone (1:1) and there was no significant difference (p

Coronavirus disease 2019 (COVID-19) is associated with high risk of malnutrition, primarily in elderly people; assessing nutritional risk using appropriate screening tools is critical. This systematic review identified applicable tools and assessed their measurement properties. Literature was searched in the MEDLINE, Embase, and LILACS databases. Four studies conducted in China met the eligibility criteria. Sample sizes ranged from six to 182, and participants’ ages from 65 to 87 years. Seven nutritional screening and assessment tools were used: the Nutritional Risk Screening 2002 (NRS-2002), Mini Nutritional Assessment (MNA), MNA-short form (MNA-sf), Malnutrition Universal Screening Tool (MUST), Nutritional Risk Index (NRI), Geriatric NRI (GNRI), and modified Nutrition Risk in the Critically ill (mNUTRIC) score. Nutritional risk was identified in 27.5% to 100% of participants. The NRS-2002, MNA, MNA-sf, NRI, and MUST demonstrated high sensitivity; the MUST had better specificity. The MNA and MUST demonstrated better criterion validity. The MNA-sf demonstrated better predictive validity for poor appetite and weight loss; the NRS-2002 demonstrated better predictive validity for prolonged hospitalization. mNUTRIC score demonstrated good predictive validity for hospital mortality. Most instruments demonstrate high sensitivity for identifying nutritional risk, but none are acknowledged as the best for nutritional screening in elderly COVID-19 patients.

Objectives Bone fractures are very common diseases, which can be caused by impact injuries or physiological disorders. Thus, the present review aimed to study the use of medicinal plants in the healing mechanism of bone fractures. Evidence acquisition Through research in the PubMed, Google Academic, and Scielo databases, this article reviews 11 ethnopharmacological studies and 34 preclinical studies on the biological actions of different plants in bone fracture healing mechanism. Results Indian tribes have highlighted in the plants ethnopharmacological study for various diseases, including bone fractures. However, despite the large citations of traditional use, technical-scientific studies are still scarce in the literature. Chenopodium ambrosioides, Piper sarmentosum, quadrangular Cissus, Ricinus communis and Radix salvia miltiorrhiza plants were the most studied in the literature regarding their osteogenic, angiogenic, anti-inflammatory and remodeling effects, acting on bone receptors, stimulating bone metabolism, increasing minerals uptake, and assisting in free radicals breakdown. Conclusion Thus, the medicinal plants use is promising in the field of bone regeneration, as well as being alternative when conventional therapies are unfeasible, increasing herbal medicines demand and popularity.

Abstract: Rotavirus (RV) it’s the agent of one of the main causes of severe viral gastroenteritis in the pediatric population, being responsible for a significant portion of deaths related to diarrhea among children under five years. RV are identified as a potential reference pathogen and it is known that the persistence and infectivity of the viral particles can be related to environmental factors. The aim of the study was to identify and correlate the presence of Rotavirus in collective and individual water sources (deep tubular wells, shallow tubular wells, shallow dug wells, springs, surface water, rainwater stored in cisterns and water trucks that were collected from surface water) of rural communities in the state of Goiás, with the seasons in which the collections were made (rainy and dry season). For this, 86 water samples in the dry period and 160 samples in the rainy period were collected. Concentration of water samples, extraction of viral genetic material, cDNA synthesis and molecular tests (qPCR) were performed. When analyzing the presence of RV in the samples in relation to the period studied, RV was found to be more prevalent in the dry season (54.7%) than in the rainy season (20%), showing a strong statistical association with the dry season (p-value < 0.001). The proportion of positive samples in the dry period, considering the type of source, resulted in higher in Shallow dug wells (p-value <0.001), higher in surface waters (p = 0.001) and higher in spring water (p-value = 0.02). The presence of pathogenic microorganisms in water is a public risk problem, enabling the emergence of outbreaks, endemics and epidemics. In the present research, there was an association among the presence of Rotavirus and the dry period of the year, when compared to the rainy period. Describing or identifying the seasonal behavior of pathogens is important for prevention and attention to water treatment and help in the monitoring of the virus in the water sources.

Elevated levels of immunoglobulin E (IgE) are associated with allergies and other immunological disorders. Experimentally, sensitization with alum adjuvant favors IgE production while CpG-ODN adjuvant, a synthetic toll-like receptor 9 (TLR9) agonist, inhibits it. The cellular mechanisms underlying TLR-regulation of immunoglobulin production are still controversial. Specifically, TLR-mediated IgE regulation in vivo is not yet known. We show that augmented levels of IgE induced by sensitizations to OVA with or without alum adjuvant or with OVA-pulsed dendritic cells (DCs) were inhibited when sensitization to OVA was performed in the presence of CpG. Notably, CpG-mediated suppression of IgE production required MyD88-expression on DCs but not on B-cells. This contrasts with previous reports of in vitro regulation IgE where CpG acted directly on B cells via MyD88 pathway. In addition, CpG also inhibited IgE production in a MyD88-dependent manner when sensitization was performed with OVA-pulsed DCs. Finally, CpG signaling through MyD88 pathway was also necessary and sufficient to prevent anaphylactic antibody production involved in active cutaneous anaphylaxis.

Leptospirosis is a zoonotic disease that has a cosmopolitan geographical distribution, reported in domestic and wild animals, which act as reservoirs and contribute to the spread of the microorganism in the environment. In Brazil, studies on the occurrence of leptospirosis in buffaloes in the Amazon biome are scarce. The objective of this study was to determine the occurrence of antibodies against Leptospira spp., including serovar Hardjo (Bolivia), isolated from cattle in Brazil and not yet tested in buffaloes. A total of 387 blood serum samples of animals from nine municipalities in the Marajó Island, state of Pará, northern Brazil, were obtained from a biological sample bank and analyzed using the serum agglutination microscopic test (SAM). Serology revealed 91.5% (387/354) of the animals tested positive for anti-Leptospira antibodies. Among the serovars tested, the serovar Hardjo (Bolivia) was the most prevalent, present in 79.3% of the reactive buffaloes.

BDD is a hoof disease characterized by inflammation of the second and fifth accessory digits and the skin in this region. This pathology is scarcely described in the literature; however, it has recently been observed in beef cattle in the Amazon Biome region. The objective of this study was to identify the epidemiological factors associated with BDD onset in cattle in the analyzed biome. Samples were collected from eight farms with extensive breeding systems located in Xinguara, Rondon do Pará, Curionópolis, and Ipixuna do Pará, in the state of Pará, Brazil. A total of 706 Nellore and Nellore crossbred with taurine animals of both sexes were evaluated, with males aged between 2–4 years and a mean weight of 650 kg and females aged between 2–11 years and a mean weight of 400 kg. Distal extremities were inspected during cattle management, and in case of accessory digit lesions, a specific examination was carried out after proper restraint. Animals were diagnosed with BDD in all farms analyzed. Of the 706 cattle inspected, 49 (6.94%) showed BDD, of which 19 (38.77%) were Nellore and 30 (61.22%) were crossbred. This was the first study to determine BDD’s occurrence in extensive farming systems in the Amazon region, also showing that pastures with large amounts of stumps and stones, the physical structure of pens, and trauma and injury incidence during animal management are the most important predisposing factors for the onset of BDD.

Introduction: Biofuels, biohydrogen and bioethanol have properties that stand out from other fossil fuels, are colorless, odorless, and insipid, therefore, they are free of contaminants. Its production can be generated from the biomass of the aquatic plant Eichhornia crassipes, since this alternative is timely and viable due to its high energy composition. This plant is a problem in wetlands, rivers and other hydrosystems, due to its abundance and dominance over other species of aquatic plants, and which in effect causes an ecological imbalance. Objective: To evaluate the production of biohydrogen and bioethanol from the biomass of the E. crassipes plant. Materials and methods: Lignocellulosic material was used, realizing different physical, chemical and biological processes such as: reduction of size, lignin removal, acid hydrolysis, fermentation and distillation. a laboratory scale production system was designed and built where two bioreactors were used in the process. Results and discussion: the production of bioethanol and biohydrogen showed a production index of more than 40 mg of bioethanol per gram of bio-mass of E. crassipes and in relation to biohydrogen, 65 mmol / L was obtained. Conclusion: With the biomass of E. crassipes it is possible to obtain a high index of bio-fuel production, since it is possible to take advantage of its physical characteristics and its high proliferation in hydrosystems, in this way it constitutes an optimal alternative to produce biohydrogen and bioethanol at a high scale.

The art work of this present paper is to show properly conditions and aspects to reach stability in the process control, as also to avoid instability, by using digital PID controllers, with the intention of help the industrial community. The discussed control strategy used to reach stability is to manipulate variables that are directly proportional to their controlled variables. To validate and to put the exposed principles into practice, it was done two simulations of a continuous fermentation tank process start-up with the yeast strain S. Cerevisiae NRRL-Y-132, in which the substrate feed stream contains different types of sugar derived from cane bagasse hydrolysate. These tests were carried out through the resolution of conservation laws, more specifically mass and energy balances, in which the fluid temperature and level inside the tank were the controlled variables. The results showed the facility in stabilize the system by following the exposed proceedings.

This study evaluated the grain size and high organic content from drinking water treatment sludge (DWTS) in the properties of ceramics. Samples were studied using raw and oven dried DWTS at 110 °C in two granulometries (0.180 mm and 0.075 mm), with and without calcination (550 °C), as partial replacement of two soils commonly used in ceramic production. Specimens were prepared with 5, 10, and 20% DWTS and calcined at 950 °C to determine their chemical, physical, mineralogical and mechanical properties. The DWTS reduced the density and increased the absorption and shrinkage of the specimens after calcination. An increase in strength with up to 10% sludge, driven by the presence of fluxing agents, was verified. The processing method had little influence on the properties of ceramic with above 10% of sludge. In conclusion, the use of raw DWTS obtained better results with low energy usage for its reuse.

Many of engineering’s problems are about to optimise equations, functions and process models equations which appear on common or even complex science’s cases. Most applied optimisation methods nowadays can only be used on particular cases, so the main objective of this article is to define a computational method that can optimise or even find target values for specified objective functions and variables, by just using computer effort. Chemical plants involve many differential equations and they can be optimised with more facility now. On this paper, there are shown as example, an optimisation for a chemical reactor, which is found the optimal temperature and volumetric flow rate of feed, for the given objective function being the composition of the desired product. Named Domain’s Sweep, it is an algorithm that evaluate given(s) mathematical function(s) and/or equation(s) by varying your(s) independent variable(s) through loops with a given step size and solving it after closing the degrees of freedom, and finally, with some condition statements, store all the optimum values of given or created objective functions with its respective independent variables. In another words, the user create an objective function and this method find the function’s maximum, minimum or a certain chosen target value, even if it does not have an inflection point in the given search interval of the independent variables.

Dengue is one of the most important arboviruses worldwide, with currently approximately 2.5 billion people at risk of becoming infected, mainly in tropical countries. The present study evaluated the influence of climatic variables on the incidence of dengue fever in an endemic urban area. A time series study of cases was carried out with all confirmed cases of dengue fever in the municipality of Belo Horizonte from 2001 to 2021. The climatic explanatory variables were obtained from the National Institute of Meteorology. The analysis was performed using a generalized linear regression model with three scenarios: a no-lag model, 1-month lag model (1 month earlier) and 2-month lag model (2 months earlier). In the no-lag model, the maximum temperature was associated with an increase in the monthly incidence of dengue (IRR: 1.5). In the 1- and 2-month lag models, the monthly average temperature was associated with an increase in incidence (IRR: 1.9 in both). Our results suggest that temperature contributed to the increase in the incidence of dengue, and an increase of 1 °C could increase the incidence of the disease by approximately 90%. Thus, temperature monitoring can direct efforts towards prevention and control of the disease.

In a 1.5°C warmer world, the Northeastern (NE) South America’s ecosystems will experience more severe droughts, associated with decreasing rainfall. The severity of flash drought events based on vegetation and surface soil moisture has not been identified over the Caatinga ecosys-tem. This study aimed to characterize the impact of flash drought events on vegetation response via soil moisture over NE South America during the first two decades of the 2000s. Three drought indices were used to characterize flash droughts: the Standardized Difference Vegetation Index (SDVI) derived from Meteosat Second Generation (MSG), the Standardized Precipitation Index (SPI) from ground-data, and the Surface Soil Moisture (SSM) product-based Soil Moisture and Ocean Salinity (SMOS). Results revealed dramatic impacts of flash drought events on vegetation dynamics that caused abrupt changes in the regional vegetation phenology. The regional patterns of flash drought events in 2012 over NE South America were identified and had a severe impact on its Caatinga-like vegetation-dependent moisture response. In 2012, anomalously long dry spells with negative rainfall anomalies in the non-rainy season and persistent on vege-tation greenness and rapidly decreased soil moisture were prominent, thus identifying NE South America to the impacts of flash drought events. Additionally, the results from the trends analysis of radiance fluxes estimated from the MSG satellites over 18 years revealed that an overall drying trend in the NE South America semiarid ecosystem during the last two decades. Here, flash drought events were identified as the conse-quent rainfall deficiency at SPI-3< −1 for a period of five consecutive weeks or more, which the soil moisture content dropping from the 40th percentile to below the 20th percentile, with the NDVI lower than 0.30 unit. These results could be useful to guide flash-droughts early warning systems in NE South America.

Titanium dioxide (TiO2) thin films have been widely used in transparent optoelectronic devices owing to their excellent optical properties also is used in photocatalysis, cosmetics, and many other biomedical applications. However, a lack of studies was published on microstructure and adherence comparison of the TiO2 deposited on both AISI substrates. In this work, TiO2 thin films were deposited onto AISI 304 and AISI 316L stainless steel (SS) substrates via atomic layer deposition. Its heterostructure, morphology, and adhesion were compared in both substrates looking for synergistic and multifunctional properties. Raman spectroscopy mapping and X-ray diffraction using the Rietveld refinement method showed that the films are composed of anatase and rutile phases in different percentages. Scratching tests were used to analyze the film adher-ence and friction between a diamond tip and TiO2 film, showing well adhered in both substrates.

Contrary to previous belief, mutation frequency also depends on how essential a gene is. Mutation frequency is substantially lower in the coding regions of essential genes and higher in less essential genes. Even though the mutation bias based on gene essentiality is incapable of invalidating Darwinism, this bias certainly added a rather unsubtle obstacle to it by contradicting a paradigm that was widely held: that mutations are random in the sense of being independent of their function for the organism. The reason this bias occurs is currently unknown. Here, I present the theoretical solution of why genetic mutations also depend on whether the gene is more or less essential. My theory is that each gene or epigene has its own level of resistance to entropic elevation, something directly proportional to the frequency of its expression. The more a gene is expressed, the higher is its resistance to entropic elevation and vice versa. For genetic information to be conserved instead of suffering mutation, a relevant factor is also the frequency of its expression. The energy expenditure directed to a gene of current utility engenders resistance to entropic elevation of the information encoded in that gene, as energy enables not only the existence of information but also its conservation. My theory—which is based on fundamental physics and contains predictions that can be empirically tested—solves a crucial problem in evolutionary biology and genetics; if I am right, I will have established a biological law. Finally, my aim here is also to provide a substantial advance in knowledge about the relationship between information, genetics, and thermodynamics.

Civil construction is one of the oldest known activities in humanity, reports indicate that builders of the Roman Empire already sought the reuse of materials. Currently, considering the depletion of the supply of natural resources, the recycling of solid waste from construction and demolition (CDW), not only provides new products, but also offers ecological and economic alternative. In this context, this research seeks new variables for the disposal of waste from construction and demolition having in the composition of artificial finishing stones an odd possibility to be analyzed. In this research was developed and analyzed a new composite from the construction and demolition waste using as a binder an orthophthalic polyester resin. The residue was sieved and separated by granulometry by the simplex centroid method, the best compacted mixture was determined statically by ANOVA and the Tukey test. The residue was characterized by X-ray fluorescence and the resin by infrared spectroscopy by Fourier transform. Artificial rock plates were produced with 85% residue and 15% resin, by mass, by vibro system, compression and vacuum, later were cut for mechanical, physical and chemical tests. Analysis was performed by scanning electron microscopy of fractured compositions as well as grain sizes. The artificial stone with the best results presented density of 2,256 g/cm3, water absorption of 0.69%, apparent porosity of 1.55%; bending strength of 34.74 MPa and compression of 111.96 MPa; good results in the alterability and thermal tests. In this satisfactory scenario, the use of this waste in the composition of artificial rocks is promising because it directly meets the concept of sustainable development; replacing the concept of end-of-life of the linear economy, by new circular flows of reuse, restoration and renovation, in an integrated process the circular economy; as well as the quality of the final product with properties similar to the artificial rocks already marketed.

The second external cause of death from unintentional injuries is falls in people over 60, a worldwide public health problem. Associated factors are identified early in Primary Health Care. Thus, we analyze professional narratives about older adults/old age and the organization of services in the presence of fall-inducing frailty. A structured narrative was applied under the following stages: understanding the context; setting/plot/character analysis; and interpretive synthesis. Data were collected from August to November 2022, distributing 21 health professionals in three Narrative Focus Groups. In the analyses, the collective conceptions dialogued with Bourdieu’s Epistemology of field, habitus, and capital. Among the results, technical and common sense representations of older adults were simultaneously observed, along with the belief of old age as a problematic life stage. Care is centered on the installed disease/ailment. Encouraging autonomy and self-care emerges in integrative health practices, which older adults underestimate. Professionals access the lives of older adults according to their habitus, which, in turn, is structured (structuring) in the disputes for installed capital. Thus, the care provided disregards subjectivities and symbolic systems associated with falls.

IgY antibodies are found in the blood and yolk of eggs. Several studies show the feasibility of utilising IgY for immunotherapy and immunodiagnosis. These antibodies have been studied because they fulfil the current needs for reducing, replacing, and improving the use of animals. Affinity and avidity represent the strength of the antigen-antibody interaction and directly influence antibody action. The aim of this review was to examine the factors that influence the affinity and avidity of IgY antibodies and the methodologies used to determine these variables. In birds, there are few studies on the maturation of antibody affinity and avidity and these studies suggest that the use of an adjuvant, type of antigen, strain of the animal, number of immunisations, and time interfere with the affinity and avidity of IgY antibodies. Regarding the methodologies, most studies use chaotropic agents to determine the avidity index. Studies involving solution phase and equilibrium titration reactions are also described. These results demonstrate the need for standardisation of methodologies for determination of affinity and avidity so that further studies can be performed to optimise the production of high avidity IgY antibodies.

The use of Information Communication Technologies (ICT) in education brings up new possibilities of promoting the learning and health experiences. In this sense, education contexts of 21st century must consider these two areas of knowledge, especially their integration. This article presents learning practices developed with mobile devices and games, in order to improve learning and well-being in children and adolescents undergoing cancer treatment in non-formal educational setting. The methodology is based on qualitative case studies with content-based data analysis, involving informal interviews and observation methods. The study considers data from 5 patients who participated in the research between 2015 and 2019. The results demonstrate a positive influence of the practices with mobile technologies and games in terms of learning and in the well-being feeling of patients during the treatment.

The relationship between perception of anxiety and quality of life in caregivers of children with autism was verified. To verify quality of life, the Short Form Healthy Survey Item was used; perception of anxiety was assessed using the Beck Anxiety Inventory. 80 caregivers of children with autism participated, with 68.7% of caregivers being mothers. Of the total number of caregivers, 68.8% had a severe level of anxiety. Regarding quality of life, they demonstrated greater impairment in Limitation due to physical aspects, Limitation due to emotional aspects, Vitality and Pain. Caregivers with severe anxiety levels had worse quality of life in the domains of pain (p = 0.012), social aspects (p =&lt; 0.001), limitation due to emotional aspects (p = 0.001) and mental health (p =&lt; 0.001). However, in the functional capacity domain, caregivers with a moderate level of anxiety had a better physical capacity score (p = 0.001). There was a negative correlation between the general anxiety score and the general physical (p = 0.029) and general emotional component of quality of life (p =&lt; 0.001). It was found that caregivers of children with ASD present losses related to psychological factors, quality of life and the lack of social support.

The term “medical error” is quite often used to refer to any mistake committed in the provision of healthcare services which has caused harm to a patient. Objective: To analyze civil lawsuits involving medical errors in pediatrics by evaluating: 1) causal link; 2) type of medical error; 3) conviction of the court and its legal basis; 4) correlation between medical expert understanding and legal understanding. Materials and Method: Retrospective analysis of 60 pediatric forensic medical examinations carried out by a pediatric expert between April 2009 and February 2014 at the Institute of Medicine and Criminology of the State of São Paulo (IMESC). The expert’s reports were analyzed according to age, gender, type of forensic medical report (direct or indirect), conclusion of the expert’s report (causal link between the medical conduct and complaint or not), type of medical error (negligence, recklessness, malpractice), judgment in the first instance (if in accordance with the expert’s report or not), and basis of judgment as objective or subjective (type of law). Results: Most expert’s examinations (65%) were indirect (death). In 27 reports (45%), the expert’s conclusion determined that there was a causal link between medical care and the damage inflicted to a patient. Of the 27 reports with causal link, the judge was not in accordance with the expert’s report in one case, thus not considering medical error. The vast majority of sentences (55) were in accordance with the expert’s conclusion (91.6%). Subjective law was mostly used to support the judge’s ruling (61.70%), followed by objective law (23.30%). All lawsuits claimed moral damages (100%). In the statistical analysis of distribution of nominal variables (frequency), an excellent agreement (kappa= 0.86), with statistical significance, was verified between the expert’s report and the court ruling. Conclusion: Expert evidence supported 91.6% of the sentences and was considered to be highly valuable evidence. Expert evidence had a major impact on the legal proceedings and has proven statistically significant (p<0.005). Subjective law was used to assess medical error in all cases in which healthcare professionals were involved. Claims for moral damages was requested in all lawsuits, and was fully or partially granted in 100% of the cases.

Exercises for lower trapezius (LT) often use overhead positions, causing compressive forces to the subacromial space. Scapular retraction would be an alternative to activate LT muscle. Electromyography of infraspinatus (IS), upper (UT) and LT was recorded during scapular retraction under progressive adduction loads of 42 participants, divided in 2 groups: with (SP, n=26) and without shoulder pain (nSP, n=16). The adduction loads of 20, 30, 40 and 50% of the maximal voluntary contraction were applied using a load cell. Normalized electromyography and the ratio between UT and LT (UT:LT) were used for statistical analysis. No differences were observed between groups, but a condition effect occurred for all muscles: UT showed higher values at 50% vs. 20% (p=0.004); LT showed higher values on 40% and 50% (p=0.001; 0.006). Higher values for IS were noted at 40% (vs 20%; p=0.04), and at 50% (vs. 20%; p=0.001, vs. 30%, p=0.001; vs. 40%; p=0.001). UT:LT showed lower values at 50% (vs. 20%; p=0.001, and vs. 30%; p=0.016). Scapular retraction with adduction loads at 40-50% is an alternative to overhead exercises aiming to activate the LT and the IS muscles. The exercise ensures higher levels of LT and IS excitation, without increasing UT excitation.

Studies show that executive functions and motor development are associated among each other and with learning ability. A more technological lifestyle, related with digital culture, should be considered an important component to stimulate children. In addition, digital games constitute an element of the digital culture in which children are inserted. The aim of this study is to present a systematic mapping of the literature involving executive functions, motor development and the use of digital games in intervention programs for elementary school children, from 6 to 11 years old. Four databases were searched: PubMed, Scielo, Science Direct and SCOPUS, including publications between 2012 and March 2021. The initial results indicated 4881 works. After the selection process, 15 investigations that presented the central theme of the study were selected. The main results indicate that intervention strategies are quite heterogeneous. Most of the studies demonstrated significant positive effects after intervention protocols and were conducted in Europe and 46% of the studies were conducted in a school environment. No researches were identified that involved technological solutions involving executive functions, motor development and digital games in an integrated manner, constituting a field of future scientific research.

In 2020, it is estimated that 7.8% of all live births in the United States were complicated with gestational diabetes, with around 10% of all pregnancies in North America involving gestational diabetes. GDM’s prevalence has been increasing over time, likely due to the population’s rising BMI and increasing maternal age. GDM has been long associated with increased complications in pregnancy, from preeclampsia and macrosomia in the short-term, to long term ramifications including the development of type 2 diabetes mellitus, cardiovascular disease, and potential effects on the offspring, including obesity, insulin resistance, hypertension, and increased risk of autism. Additionally, as the field of epigenetics continuously grows, we are able to further elucidate epigenetic mechanisms at play in the development of GDM and how these changes may affect the offspring. In this narrative review, we have compiled recent and relative clinical studies that highlight the role epigenetics may play in the development and perpetuation of GDM, as well as its possible effects on the offspring.

The main challenges in oil platforms are how to define optimal setpoints and decision-making for controlling variables due to many existing dynamical production uncertainties while conceding safe operation and minimizing discharge to sea and atmosphere without killing plantwide inventory. A novel scheduling model to optimize the whole essential units of an oil platform production gathering topside and subsea variables is disclosed. A proper topside and subsea scheduling model enables and creates harmony between optimal production, supply chain, costs, and market dynamics, satisfying demands, environmental and operations constraints leading to stability. The interest of the present research lies in determining the optimal topside and subsea operational settings and decision-making, establishing maximum E&P performance and production control setpoints while predicting and manipulating reservoir lifespan and its revitalization. This objective is attained through a novel multiperiod large-scale model for the planning and operational production scheduling and model predictive control (MPC) in oil platforms complying with sustainability, profitability, platform design capacities, and offloading of oil and gas to supply chains or to pipeline exportation. The present model details heat and mass transfer, PVT, flow profiles along a planning horizon and can be used to any oil platform since comprises all the essential unit operations for oil, gas, CO₂, H₂S and water. The model maximizes the total oil production over any planning horizon. The model is versatile, and decision-making can be either linear or nonlinear but rather a MILP or LP as best choice on optimizing large-scale systems. If the model is applied with auto rescheduling on site within variable hours or minutes, it becomes a real-time optimization schedule approach. Due to its high-velocity performance and robustness, a novel multi-objective function strategy, acting as an LP generic plantwide MPC with industrial scope to maximize production while controlling the process is presented, and as an example is here used to control slug flow to avoid equipment trips and inventory instability, at the same time production is maximized. The output from the decision-making was compared to actual plant data, and the results proved compliance to the design capacity with process safety and sustainability. Comparing to official Brazil's government data for oil, the case study showed superiority to the same size platforms, like FPSOs P-75 and MV32, e.g., more than 101.5% more capacity to produce oil in beginning of campaign after first oil, and 10.5% during campaign. The present work indicates that: 1) the production of millions of barrels is being delayed or left aside; 2) not scheduling production harms the environment and diminish process safety; 3) not scheduling production can create stochastic supply chain deliveries instead of organizing it by deterministic offloading days; 4) scheduling is essential to manipulate, revitalize and monitor reservoir's pressure and content under uncertainty; 5) the oil platform can be automatic optimized by a plantwide MPC reducing human activity/dependency; 6) scheduling gives more transparency to stakeholders and contractors by forecasting business data and capability, and can design, develop or enable new businesses.

The main objective of this review is to determine the main risks that agricultural workers are exposed to during pesticide application, which may have a harmful effect on their health and on public health. This systematic review was based on the PRISMA guidelines. A search for articles was conducted in the Medline/PubMed, ScienceDirect, and Web of Science databases. Fifteen articles were selected considering their assessment of agricultural workers' knowledge, perceptions, attitudes, practices, and behaviours, identifying the main risks and risk factors for disease associated with the unsafe handling of pesticides. The main risk factors identified were age, education, pesticide safety training, farming experience, and contact with other farmers/intermediaries resulting in pesticide access. The most frequent risk behaviours were: application of pesticides without personal protective equipment (PPE), incorrect disposal of empty packaging and waste, and undervaluation of label information, as well as other unsafe practices. A multidisciplinary and more effective training must be delivered in order to enhance pesticide safe usage. This will empower workers to adopt more conscious and safer behaviours while using pesticides.

Stainless steel 316L (SS316L) and titanium-alloy Ti6AL4V exhibit properties for bio-medical applications; however their tribocorrosion associated with metallosis is still a major concern. Therefore smoothing DLC coatings aiming for the improvement of tri-bocorrosion and cell viability of stainless steel 316L (SS316L) and titanium-alloy Ti6AL4V with and without DLC coatings were compared. The motivation was due to many papers detailing metallosis caused by metal debris in the body's soft tissues. Nowadays, metallosis is responsible for almost of prosthesis replacement surgeries. DLC coatings were produced using the Plasma Enhanced Chemical Vapor Deposition (PECVD) technique; acetylene gas was used as a carbon precursor, and silane gas produced an amorphous silicon interface between the DLC coating and metal substrate. A combined setup of techniques thoroughly evaluated the coatings considering chemical composition, coatings adhesion at a metallic substrate, scratch resistance, and tribocorrosion susceptibility. The cytotoxicity and genotoxicity of metallic samples with and without DLC coatings were analyzed, considering cell viability and its correlation with coatings’ chemical composition

In this work, we propose an approach for the autonomous navigation of mobile robots using fusion of sensor data by a Double Deep Q-Network with collision avoidance by detecting moving people via computer vision techniques. We evaluate two data fusion methods for the proposed autonomous navigation approach: Interactive and Late fusion strategy. Both are used to integrate mobile robot sensors through the following sensors: GPS, IMU and, an RGB-D camera. The proposed collision avoidance module is implemented along with the sensor fusion architecture in order to prevent the autonomous mobile robot from colliding with moving people. The simulation results indicate a significant impact on the success of completing the proposed mission by the mobile robot with the fusion of sensors, indicating a performance increase (success rate) of 27% in relation to navigation without sensor fusion. With the addition of moving people in the environment, deploying the people detection and collision avoidance security module has improved about 14% the success rate when compared to that of the autonomous navigation approach without the security module. Video was developed with robot navigation using the DDQN-Late Fusion https://www.loom.com/share/684afa6a5b0148afadc9a200ab9f3483.

The perceived poor performance of publicly traded companies on their sustainability commitments and the quality of sustainability reporting has prompted stakeholders to consider the economic, environmental, and social impacts of corporate activities. Economic activities have led to various threats in the form of climate change, pollution, greenhouse gas emissions, natural disasters, and other issues that have negatively impacted the environment and stakeholders. Companies are expected to report to stakeholders on their sustainability performance, but reality proves that present reporting falls below stakeholders’ expectations mainly due to its still voluntary nature. The present study aims to provide a literature review of the relationship between sustainability reporting and the role of companies governance, especially observing if climate change requirements and energy-needed changes are being accounted. Results highlight mixed evidence for the influence of board governance attributes, providing interesting insights for research advancement. The study has practical implications for businesses, regulators, governments, and other stakeholders in their policy deliberations and investment decisions. Further empirical studies are recommended to re-examine sustainability reporting using the variables identified as important factors and gaps in this study and other board characteristics to improve the generalizability of the results.

Preliminaries Convolutional Neural Network (CNN) applications have recently emerged in Structural Health Monitoring (SHM) systems focusing mostly on vibration analysis. However, the SHM literature shows clearly that there is a lack of application regarding the combination of PZT (Lead Zirconate Titanate) based method and CNN. Likewise, applications using CNN along with the Electromechanical Impedance (EMI) technique applied to SHM systems are rare. To encourage this combination, an innovative SHM solution through the combination of the EMI-PZT and CNN is presented here. To accomplish this, the EMI signature is split into several parts followed by computing the Euclidean distances among them to form a RGB (red, green and blue) frame. As a result, we introduce a dataset formed from the EMI-PZT signals of 720 frames, encompassing a total of 4 types of structural conditions for each PZT. In a case study, the CNN-based method was experimentally evaluated using three PZTs glued onto an aluminum plate. The results reveal an effective pattern classification; yielding a 100% hit rate which outperforms other SHM approaches. Furthermore, the method needs only a small dataset for training the CNN, providing several advantages for industrial applications.

The use of several light-related variables, such as the Secchi disc depth, the euphotic depth, and in particular, the diffuse attenuation coefficient (Kd), is deeply rooted in phytoplankton research, but these are not the most appropriate indicators of the amount of light available for photosynthesis. We argue that the variable of interest for phytoplankton is the mean light intensity in the mixed layer (Im), which represents the mean light to which phytoplankton cells are exposed throughout their life cycle, while being continuously mixed in the mixed layer. We use empirical data collected in different coastal ecosystems in southern Portugal to demonstrate why Im should be the preferred metric instead of the deeply rooted Kd. We show that, although the relationship between Im and Kd is inversely proportional, it is not always strong or even significant. Different Im values can be associated to the same Kd, but distinct Im have different physiological effects of phytoplankton. Therefore, Kd does not capture the amount of light available for photosynthesis, given that, unlike Im, Kd calculation does not consider the depth of the mixed layer. Therefore, we urge phytoplankton researchers to consider the measurement and calculation of Im when evaluating light-related processes in phytoplankton ecology.

Cross-cultural mobility is a phenomenon that is increasingly growing, and the resulting stress has become a severe health issue. Thus, we conducted a systematic review of articles reporting research on stress measures of cross-cultural mobility or acculturative stress, emphasizing its internal structure. We adopted the PRISMA procedures for scoping reviews (e.g., searching articles in databases), resulting in the inclusion 20 articles in the final analysis that present evidence of validity based on the internal structure of 16 measures. The most common factors identified were related to cultural stressors, language stressors, and discrimination stressors. After analyzing a cross-cultural mobility stress concept implicit in the definitions used in the articles, we found that most measures of acculturative stress did not evaluate it according to the Stress and Coping Model of Lazarus and Folkman. Most measures only focused on part of the phenomena (some estimated the stressors, others the coping strategies). Few took into account the physiological and psychological responses to internal or external stressors, and even fewer considered its positive aspects (eustress). Consequently, it is pivotal to develop measures that take into account the multiple dimensions of the cross-cultural mobility stress. Other results (e.g., validity evidence of the measures) and limitations of this systematic scoping review are presented and discussed.

Rigid polyurethane foams were synthesized using a renewable polyol from the simple physical mixture of castor oil and crude glycerol. The effect of the catalyst and blowing agent in the foams properties was evaluated. The use of physical blowing agent (cyclopentane and n-pentane) allowed obtaining foams with smaller cells in comparison with the foams produced with a chemical blowing agent (water). The increase of water content caused a decrease of density, thermal conductivity, compressive strength and Young's modulus, which indicates that the increment of CO₂ production contributes to the formation of larger cells. Higher amount of catalyst in the foam formulations caused a slight density decrease and an increase small significance of thermal conductivity, compressive strength and Young's modulus values. These green foams presented properties that indicate a great potential to be used as thermal insulation, as density (23 - 41 kg m^-3), thermal conductivity (0.0128 – 0.0207 W m^-1 K^-1), compressive strength (45 - 188 kPa) and Young's modulus (3 - 28 kPa). These biofoams are also environmental friendly alternatives and can aggregate revenue to biodiesel industry, contributing for reduction of this fuel prices.

This study analyzes the relevance of governance structure for efficiency in revenue collection by Brazilian Water Utilities (WUs). Data was collected from the National Information System on Sanitation (SNIS) for 127 Brazilian WUs, covering a balanced longitudinal panel from 2018 to 2022. Governance structures evaluated included Ownership (public or private) and Corporatization (publicly traded or not). In scientific databases, we did not find studies on the efficiency of specific WUs in collecting customer bills for services rendered and its relationships with this type of governance; thus, this would be the main innovative contribution of the study to the previous literature. In the first stage, the study utilized the Dynamic Slack Based Model (DSBM) to assess revenue collection efficiency. In the second stage, an econometric model with Generalized Estimating Equations (GEE) to explain the efficiency. The findings revealed a global average inefficiency of 50.47% in revenue collection. Corporatization was linked to higher collection efficiencies, while ownership type was significant, but with lower collection efficiency. Factors such as tariff accessibility, urbanization, and the COVID-19 pandemic also influenced efficiency. The study suggests regulatory bodies should consider these insights to implement policies that prevent inefficiencies from affecting the tariff system for services.

Brazil is the number-one country in pesticide consumption, and corn is the second most cultivated crop in the country. Chemical control of weeds associated with corn cultivation is performed by application of herbicides with pre- and postemergence action, such as S-metolachlor. Currently, the toxicity of herbicides is a task of great concern. In this regard, the present study aimed to evaluate the effects of an S-metolachlor-based herbicide through bioassays with the plant model Lactuca sativa L. (lettuce) and Zea mays L. (maize). The herbicidal test solutions containing 7.5, 15, 30, 60, 120, 240, 360, 480, 600, and 720 mg L-1 of the active ingredient S-metolachlor were prepared from commercial products. Distilled water was used as a negative control, and aluminum was used as a positive control. Macroscopic analyses (germination and growth) were performed for the two species, and microscopic analyses (chromosomal and nuclear changes) were performed for L. sativa. Negative interference of the S-metolachlor-based herbicide on lettuce was observed for all macroscopic and microscopic parameters tested. In maize, there was no significant interference in germination; however, the herbicide interferes negatively in seedling development. In brief, the herbicide based on S-metolachlor has phytotoxic potential, just as discussed.

In Brazil, the production of corn and soybeans has been growing significantly in recent years. Considering that the strategies for investing in the production of these crops are conditioned by production costs and risk, the objective of this article is to propose a simulation model that indicates the trend of production costs for these commodities, considering the dispersion and correlation of selected key variable prices and corn and soybean production costs practiced between the years of 2018 and 2022. Fifty specialized companies in the state of Sao Paulo, Brazil, provided data for this study, and Monte Carlo simulations showed that the total cost of corn production/ha is between USD 600.00 and USD 1150.00, with a level of certainty of 84.7%, and soybeans are in the range of USD 260.00 to USD 420.00, with a level of certainty of 86.4%. The model evidenced a trend of decreasing production costs for the crops for the 2023/24 and 2024/25 harvests, as the input with the greatest impact (fertilizer) is showing a downward trend. On the other hand, costs related to labor, soybean seed, and fungicides are showing an upward trend, while dolomitic limestone corrective remains stable.

This paper proposes a method based on genetic algorithm (GA) for the security-constrained optimal dispatch of integrated natural gas and electricity networks, considering operating scenarios in both energy systems. The mathematical formulation of the optimization problem consists of a multi-objective function which aims to minimize both cost of thermal generation (diesel and natural gas) as well as the production and transportation of natural gas. The joint gas-electricity system is modeled by two separate groups of nonlinear equation, which are solved by the combination of Newton's method with the GA. The applicability of the proposed method is tested in the Belgian gas network integrated with the IEEE 14-bus test system and a 15-node natural gas network integrated with the IEEE 118-bus test system. The results demonstrate that the proposed method provides efficient and secure solutions for different operating scenarios in both energy systems.

The Cantareira Water Producer System (CWPS), which supplies water to the most populous Brazilian region, Metropolitan Region of São Paulo (MRSP), faces significant challenges due to climate change, threatening its water security. Climate change affects the hydrological cycle affecting water availability. The CWPS is vulnerable to periods of scarcity and instability due to increased climatic variability and increasing water consumption. Current water resource management systems do not consider the impacts of climate change, making it difficult to ensure water security in the future. This study analyzes the impact of climate change on the availability of CWPS using hydrological modeling approach with forecast precipitation data by CMIP6 and assessment of existing systems. The finds will provide a comprehensive understanding of the challenges faced by CWPS in the context of climate change, as well as support strategies and adaptive measures to ensure water security for MRSP.

The Neotropical region is one of the most diverse regions of the globe in terms of macro-organismic species. Regarding the microbial world, however, little is known about the diversity and biogeography patterns of micro-organisms in the Neotropics. In this context, the study of several microbial taxonomic groups is still missing and/or incomplete, such as the protists. Our goal here was to summarize the available information of Neotropical protists, focusing on molecular data from environmental continental samples, to explore what these data evidence on their ecology and biogeography. For this, we reviewed the findings from all articles that focused on or included the terrestrial protists using metabarcoding approach and identified the gaps and future perspectives in this research field. We found that Neotropical protists diversity patterns seem to be, at least in part, congruent with that of macro-organisms and, different than plants and bacteria, just weakly explained by environmental variables. We argue that studies with standardized protocols including different biomes are necessary to fully characterize the ecology and biogeography on Neotropical protists. Furthermore, dismember evolutionary lineages and functional guilds of protists are important to better understand the relationship between diversity, dispersal abilities and functionality of particular taxa of protists in their habitats.

The Chikungunya virus (CHIKV) presents global health challenges, with Brazil witnessing out-breaks since its introduction in 2014. In 2023, Minas Gerais (MG) experienced a CHIKV outbreak, prompting entomological investigations to identify vectors, viral lineages, and assess insecticide resistance. This study utilized social media platforms and citizen science concept to conduct a comprehensive entomological survey. Following Instagram posts, residents with CHIKV sus-pected cases were able to schedule mosquito aspirations. During the aspirations, 421 mosquitoes (165 Aedes aegypti and 256 Culex quinquefasciatus) were captured from 40 households in Salinas city (MG) and tested for Dengue, Zika and Chikungunya viruses through RT-qPCR. Twelve out 57 pools (10 of Ae. aegypti and 2 of Cx. quinquefasciatus) tested positive for CHIKV RNA. Viral RNA was also detected in the heads of 9 Ae. aegypti individuals (but not in Cx. quinquefasciatus). Genome sequencing revealed that CHIKV belonged to the East-Central-South-Africa (ECSA) genotype. Additionally, genetic analyses revealed high frequencies of kdr alleles, suggesting resistant to pyrethroids insecticides in this Ae. aegypti population. These findings emphasize the urgent need for innovative vector study and control strategies to combat arbovirus transmission, and inter-disciplinary approaches in public health interventions.

Chronic pain is a serious health concern and potentially debilitating condition, leading to anxiety, depression, reduced productivity and functionality, and poor quality of life. This condition can be even more detrimental and incapacitating in the pediatric patient population. In low and middle income countries (LMICs), pain services are inadequate or unavailable, leaving most of the world's pediatric population with chronic pain untreated. Many of these children in LMICs are suffering without treatment, and often die in pain. Awareness and advocacy for this population must be prioritized. We reviewed the available literature on the chronic pediatric pain burden in LMICs, barriers to treatments, and current efforts to treat these patients.

The efficient and sustainable management of hospitals is an increasingly relevant challenge in the healthcare sector. With limited financial resources, regulatory pressures and increasing demands for quality services, hospitals are faced with the want to approve sound policies to certify financial and operational sustainability. Management accounting is critical in this instance. In Portugal the DL nº 284, of July 26, 1999, allow us to confirm the need to reinforcement of profitability and efficiency in the provision of healthcare. Management accounting is an essential tool for monitoring and controlling costs, making strategic decisions, efficiently allocating resources and evaluating performance in the hospital environment. It allows a comprehensive view of financial and operational aspects, providing valuable information for management and strategic planning. However, the sustainability of hospital management accounting is a critical and complex topic that deserves special attention. Hospitals face several challenges, such as the complexity of hospital costs, the integration of information systems and the measurement of healthcare value. These challenges can compromise the effectiveness of management accounting and its ability to provide relevant and reliable information for decision making. As a result, it is required to address the sustainability of hospital management accounting by identifying the specific challenges faced in this area and exploring opportunities to overcome them. By addressing these challenges and seizing opportunities, hospitals can strengthen their position in the healthcare sector, improve their operational efficiency, optimize resource allocation and ensure the provision of quality services to patients. In this article, the challenges faced by hospital management accounting will be analysed, such as the complexity of costs, the integration of information systems and the measurement of value in healthcare. Additionally, opportunities to improve financial and operational management will be highlighted through the adoption of advanced technologies, an emphasis on value-based management and collaborative partnerships. By exploring these themes, this essay aims to make a contribution. to the advancement of hospital management accounting and the sustainability of hospitals in the current healthcare scenario.

As digitalization expands across all sectors, the economic toll of software defects on the U.S. economy reaches up to $2.41 trillion annually. High-profile incidents like the Boeing 787-Max 8 crash have shown the devastating potential of these defects, highlighting the critical importance of software testing within quality assurance frameworks. However, due to its complexity and resource intensity, the exhaustive nature of comprehensive testing often surpasses budget constraints. This research utilizes a machine learning (ML) model to enhance software testing decisions by pinpointing areas most susceptible to defects and optimizing scarce resource allocation. Previous studies have shown promising results using cost-sensitive training to refine ML models, improving predictive accuracy by reducing false negatives through addressing class imbalances in defect prediction datasets. This approach facilitates more targeted and effective testing efforts. Nevertheless, the generalizability of these models across different projects (cross-project) and programming languages (cross-language) remained untested. This study validates the model's applicability across diverse development environments by integrating various datasets from distinct projects into a unified, using a more interpretable ML approach. The results demonstrate that ML can support software testing decisions, enabling teams to identify up to seven times more defective modules with the same testing effort as a benchmark.

Açaí, Euterpe oleracea Mart. is a native plant from the Amazonian and is rich in several phyto-chemicals with anti-tumor activities. The aim was to analyze the effects of açaí seed oil on colo-rectal adenocarcinoma (ADC) cells. In vitro analyses were performed on CACO-2, HCT-116, and HT-29 cell lines. The strains were treated with açaí seed oil for 24, 48, and 72 h, and cell viability, death, and morphology were analyzed. Molecular docking was performed to evaluate the inter-action between the major compounds in açaí seed oil and Annexin A2. The viability assay showed the cytotoxic effect of the oil in colorectal adenocarcinoma cells. Acai seed oil induced increased apoptosis in CACO-2 and HCT-116 cells and interfered with the cell cycle. Western blotting showed increased expression of LC3-B, suggestive of autophagy, and annexin A2, an apoptosis regulatory protein. Molecular docking confirmed the interaction of major fatty acids with annexin A2, suggesting a role of açaí seed oil in modulating annexin A2 expression in these cancer cell lines. Our results suggest the antitumor potential of açaí seed oil in colorectal adeno-carcinoma cells and contribute to the development of an active drug from a known natural product.

This paper proposes an upper bound for mine productivity and also a simple truck dispatch rule that demonstrates how tight the upper bound can be using simulation. It also proposes a greedy search to approximate the productivity upper bound, which is faster and often exact. Uncertainty is added to the simulation in order to verify how the productivity responds to it. Typically, the productivity upper bound is less tight close to its saturation point as a function of the number of trucks, where adding more trucks only increases queues. Furthermore, more uncertainty in the model typically leads to a less tight upper bound. The results are conducted using real data from an open pit mine in Brazil.

The objective was to assess the instrumental validity and the test-retest reliability of a low-cost hand-held push dynamometer adapted from a load-cell based hanging scale (tHHD) to collect compressive forces in different ranges of compressive forces. Three independent raters applied 50 pre-established compressions each on the tHHD centered on a force platform in 3 distinct ranges: ~70 N, ~160 N, ~250 N. Knee isometric strength was also assessed on 19 subjects in two sessions (48h apart) using the tHHD anchored by an inelastic adjustable strap. Knee extension and flexion were assessed with the participant seated on a chair with the feet resting on the floor, knees, and hips flexed at 90°. The isometric force peaks were recorded and compared. The ICC and the Cronbach’s α showed excellent consistency and agreement for both instrumental validity and test-retest reliability, as the correlation and determination coefficients. The SEM and the MDC analysis returned adequate low values with a coefficient of variation less than 5%. The Bland-Altman results showed consistency and high levels of agreement. The tHHD is a valid method to assess the knee isometric strength, showing portability, cost-effectiveness, and user-friendly interface to provide an effective form to assess the knee isometric strength.

Keywords: Forest management; sustainability; FSC; PEFC; research; market share

The urgent global health challenge posed by methicillin-resistant Staphylococcus aureus (MRSA) infections demands effective solutions. Antimicrobial peptides (AMPs) represent promising tools of research of new antibacterial agents and LyeTx I mn∆K, a short synthetic peptide based on the Lycosa erythrognatha spider venom, is a good representative. This study focused on analyzing some antimicrobial activities of LyeTx I mn∆K, including minimum inhibitory and bactericidal concentrations, synergy and resensitization assays, lysis activity, the effect on biofilm, and the bacterial death curve in MRSA. Additionally, its characterization was conducted through isothermal titration calorimetry, dynamic light scattering, calcein release, and finally, efficacy in a mice wound model. The peptide demonstrating remarkable efficacy against planktonic cells and biofilms of MRSA, outperforms vancomycin in terms of rapid bactericidal action and anti-biofilm effects. The mechanism involves significant membrane damage. Interactions with bacterial model membranes, including those with lysylphosphatidylglycerol (LysylPOPG) modifications, highlight versatility and selectivity of this compound. Also, the peptide has the ability to sensitize resistant bacteria to conventional antibiotics, showing potential for combinatory therapy. Furthermore, using an in vivo model, was showed that a formulated gel containing the peptide proved superior to vancomycin in treating MRSA-induced wound in mice. Together the results highlight LyeTx I mnΔK as a promising prototype for the development of effective therapeutic strategies against superficial MRSA infections.

The escalating environmental challenges that stem from urban residential waste in densely populated areas have become increasingly prominent in recent times. As a result, the waste management sector has experienced significant growth nationwide. However, due to the predominantly manual nature of these processes, their effectiveness falls short of meeting the current demand. Addressing these issues requires process enhancement. In this context, Industry 4.0, particularly the concept of Digital Twins, emerges as a potential avenue for refining processes. To tackle both current and future industry challenges, it is imperative to create a comprehensive methodology capable of generating effective solutions within the waste management sector. This paper provides an explanation of digital twins, outlines the methodological framework comprising an architectural structure and layered model, and details a series of sequential methodical stages for implementing digital twins based on the specific scope determined by the end-user. A noteworthy aspect is the transformative potential of digital twins in enhancing efficiency and precision within waste management practices. By providing a virtual real-time representation of the waste management system, digital twins empower simulations and experimentation to fine-tune processes. Furthermore, they facilitate informed decision-making by offering a detailed visualization of the complete system, simplifying the identification of challenges and opportunities for improvement. that this article derives from the presentation titled "Digital Twin application methodology for the improvement of production and service systems. Application to waste management processes" at the "Sustainable Smart Cities and Territories International Conference" held in the city of Manizales, Colombia, from 21st to 23rd June 2023.

Mining is an important industry, accounting for 6.9% of global GDP. However, global development promotes accelerated demand, resulting in the accumulation of hazardous waste in land, sea, and air environments. It reached 7 billion tonnes of mine tailings generated yearly worldwide, and 19 billion solid tailings will be accumulated by 2025. Adding to this, the legacy of environmental damage from abandoned mines is worrying; in Canada there are around 10,000 abandoned mines, 50,000 in Australia, 6,000 in South Africa, and 9,500 coal mines in China, reaching 15,000 by 2050. In this scenario, restoration techniques from mining tailing have become increasingly discussed among scholars due to their potential to offer benefits towards reducing tailings levels, thereby reducing environmental pressure for the correct management and adding value to previously discarded waste. This review paper explores available literature on the main techniques of mining tailing recycling and reuse and discusses leading technologies, including the benefits and limitations, as well as emerging prospects. The findings of this review serve as a supporting reference for decision-makers concerning the related sustainability issues associated with mining, mineral processing, and solid waste management.

A Robust Optimization framework with original concepts and fundamentals also admitting a fusion of ideals from relative regret models and static robust optimization, containing conservatism concepts is disclosed. The algorithm uses a fine-tune strategy to tune the model so the robustness and a target ideality can be mutually achieved with a specified risk. The framework comprises original concepts, a mathematical approach and an algorithm. The statistical treatment of the data with the original concepts from the framework make it able to make short, middle or long-term decision-making setting. The framework has high tractability since the algorithm forces the creation of a setting that makes a robust optimization with the specified risk. The framework can be applied in linear and nonlinear mathematical models since that the objective function is monotonic in the domain of the active convex region. Several examples are solved to best understand the framework and all results demonstrated high tractability and performance. There is a wide range of applications. Along all the text, there is a profound discussion about its philosophy, objective, original concepts, fields of application, statistical and probabilistic fundamentals.

Androgenetic alopecia, the most common cause of hair loss affecting both men and women, is typically treated using pharmaceutical options such as minoxidil and finasteride. While these medications work for many individuals, they are not suitable options for all. To date, the only non-pharmaceutical option that the United States Food and Drug Administration has cleared as a treatment for androgenetic alopecia is low-level laser therapy (LLLT). Various clinical trials utilizing LLLT devices of various types are available. However, a myriad of other physical treatments for this form of hair loss are reported in the literature. This review evaluated the effectiveness of microneedling, pulsed-electromagnetic field (PEMF) therapy, low-level laser therapy (LLLT), fractional laser therapy, and non-ablative laser therapy for the treatment of androgenetic alopecia (AGA). It also explores the potential of multimodal treatments combining these physical therapies. LLLT has the majority of evidence in the literature as a physical therapy for androgenetic alopecia. However, other physical treatments, such as non-ablative laser treatments, and multimodal approaches, such as PEMF-LLLT, seem to have the potential to be equally or more promising and merit further exploration.

Patients with heart failure have difficulty in self-care management, as daily monitoring and recognizing symptoms do not readily triggers an action to avoid hospital admissions. The purpose of this study was to understand the impact of a nurse-led complex intervention on symptom recognition and fluid restriction. A latent growth model was designed to estimate self-care management and quality of life changes on patients with heart failure and assessed by a pilot study, for three months, to sixty-three patients (33 control, 30 intervention). Patients in the control group had a higher risk of hospitalisation (IRR 11.36; p<.001) and emergency admission (IRR 4.24; p<.001) at three-months follow-up. Analysis of the time scores demonstrated that the intervention group had a clear improvement in self-care behaviours (βSlope. Assignment_group=-.881; p<.001) and in the quality of life (βSlope. Assignment_group=1.739; p<.001). This study supports that a nurse-led program on symptom recognition and fluid restriction can have a positive impact on self-care behaviours and quality of life in patients with heart failure.

Patients with heart failure have difficulty in self-care management, as daily monitoring and recognizing symptoms do not readily trigger an action to avoid hospital admissions. The purpose of this study was to understand the impact of a nurse-led complex intervention on symptom recognition and fluid restriction. A latent growth model was designed to estimate self-care management and quality of life changes on patients with heart failure and assessed by a pilot study, for three months, to sixty-three patients (33 control, 30 intervention). Patients in the control group had a higher risk of hospitalisation (IRR 11.36; p<.001) and emergency admission (IRR 4.24; p<.001) at three-months follow-up. Analysis of the time scores demonstrated that the intervention group had a clear improvement in self-care behaviours (βSlope. Assign-ment_group=-.881; p<.001) and in the quality of life (βSlope. Assignment_group=1.739; p<.001). This study supports that a nurse-led program on symptom recognition and fluid restriction can have a positive impact on self-care behaviours and quality of life in patients with heart failure.

TomoSim comes as part of project ATMOS, a miniaturised DOAS tomographic atmospheric evaluation device, designed to fit a small drone. During the development of the project, it became necessary to write a simulation tool for system validation. TomoSim is the answer to this problem. The software has two main goals: to mathematically validate the tomographic acquisition method; and to allow some adjustments to the system before reaching final product stages. This measurement strategy was based on a drone performing a sequential trajectory and gathering projections arranged in fan beams, before using some classical tomographic methods to reconstruct a spectral image. The team tested three different reconstruction algorithms, all of which were able to produce an image, validating the team’s initial assumptions regarding the trajectory and acquisition strategy. All algorithms were assessed on their computational performance and their ability for reconstructing spectral "images", using two phantoms, one of which custom made for this purpose. In the end, the team was also able to uncover certain limitations of the TomoSim approach that should be addressed before the final stages of the system.

Corporate Sustainability (CS) literature has gone through a period of intense development. The moment is favorable to gathering these contributions to consistently advance the state of the art in CS and, also, discuss them to apply in real contexts. The main objective of the paper is to systematize, through a systematic literature review using content analysis of the 30 most cited articles from 2007 to 2017, the guiding pillars of CS management. The systematic search for papers was carried out in Scopus and Web of Science and the initial screening of the papers was assisted by the coding software MAXQDA 2018, through which the authors structured and analyzed their main insights, contributions and conclusions. After getting acquainted with the sample, an in-depth reading of the texts was conducted and 60 CS elements were identified. The elements cited in the relevant literature were grouped into 6 pillars related to Corporate sustainability strategy; Corporate governance; Human resources management; Knowledge and innovation management; Measurement, disclosure and independent assurance; and Management systems and Integrated management systems. The discussion of CS management pillars presented in this study provides understanding to researchers and managers on the main aspects that make up the integration of this construct in the companies, especially from a management point of view.

Synthesis of nickel oxide nanoparticles (NiO NPs) is a low cost and ecofriendly route that brings great benefits over chemical and physical methods of synthesis. Our approach consisted of using aqueous extracts from treated waste of Manihot Esculenta (Cassava) as reducing, stabilizing and capping agents for the synthesis of NiO NPs. The results proved this approach might be a viable alternative. Extracts were mixed during 30 minutes with Ni(NO3)2.6H2O leading to NPs formation. NiO NPs were characterized through FTIR, XRD, TEM and Raman spectroscopy. NiO NPs showed different shapes and sizes around 5-10 nm in agreement with the particle size calculated by XRD Scherrer equation.

Access to food systems is essential to sustain urban life. In this paper, we discuss the differences concerning accessibility levels to food systems among potential consumers in Belo Horizonte, Brazil. The goal was to characterize spatial mismatches regarding food opportunities and identify suitable areas for sustainable food mile solutions, such as non-motorized home delivery and purchase trips. For this, we have spatially related: (i) the population concentration; (ii) the income of households; and (iii) accessibility measures considering both the spatial structure of food retailers and the distance between households and stores, considering the food mile. We have then used spatial statistics and spatial analysis methods to determine the spatial pattern of variables and the cumulative opportunity measure for households. There is great spatial differentiation regarding the accessibility levels of food retailers and the results can be considered to support the development of policy and land use regulation that can stimulate non-motorized and collaborative delivery as an effective last-mile solution.

This study explores the cocrystallization between the drug praziquantel (PZQ) and the nutraceutical curcumin (CU). The investigation revealed two novel solid forms: a cocrystal solvate with ethyl acetate and a non-solvated cocrystal. This novel drug-nutraceutical cocrystal is identi-fied as “generally recognized as safe” (GRAS) praziquantel-curcumin-ethyl acetate (2:1:1) co-crystal solvate. This latter undergoes desolvation, leading to the formation of the praziquan-tel-curcumin (2:1) cocrystal. The cocrystal solvate has ethyl acetate molecules occupying the voids with minimal interactions within the crystal lattice. The application of heat treatment induces solvent removal and prompts the transition to the non-solvated cocrystal, as highlighted by VT-XRD. Thermal analyses demonstrate the stability of the cocrystal solvate up to approximately 100°C, beyond which it transforms into the non-solvated phase, which eventually melts at 130°C.

Objective: A study was made of the salivary levels of adenosine deaminase (ADA), ferritin (FRR) and total proteins in healthy individuals and in patients with oral potentially malignant disorders (OPMD), assessing the potential role of saliva as a diagnostic tool. Methods: A total of 91 subjects participated in the study, divided into two groups: 59 patients with OPMD (oral leukoplakia or oral lichen planus )and 32 healthy controls with measurements being made of salivary ADA, ferritin (FRR) and total proteins (TP). Results: There were no significant differences in salivary ADA between the OPMD group and the controls (p=0.934), though the levels of both FRR and TP were significantly higher in the OPMD group (p=0.001). Patients with oral lichen planus showed significant differences in terms of FRR (p=0.009) and TP (p=0.003). Conclusions: The promising findings of this study suggest a potential role for FRR and TP in the salivary diagnosis of OPMD. In addition, saliva appears to be a reliable tool offering an interesting alternative for the screening of large populations.

Extrusion-based additive manufacturing (AM) technologies (i.e., fused filament fabrication, FFF) mostly produce thermoplastic parts. However, producing metallic or ceramic parts by FFF is also a sintered-based AM process. FFF for metallic parts can be divided into five steps: (1) raw materials selection and feedstock mixture (including palletization), (2) filament production (extrusion), (3) production of AM components using the filament extrusion process, (4) debinding, and (5) sintering. These steps are interrelated, where the parameters interact with the other ones and have a key role in the integrity and quality of the final metallic parts. FFF can produce high-accuracy and complex metallic parts, potentially revolutionizing the manufacturing industry and taking AM components to a new level. In the FFF technology for metallic materials, material compatibility, production quality, and cost-effectiveness are the challenges to overcome to make it more competitive compared to other AM technologies, like the laser processes. This review provides a comprehensive overview of the recent developments in FFF for metallic materials, including the metals and binders used, the challenges faced, potential applications, and the impact of FFF on the manufacturing (prototyping and end parts), design freedom, customization, sustainability, supply chain, among others.

Carbon monoxide (CO) is a cytoprotective endogenous gas that is ubiquitously produced by the stress response enzyme heme-oxygenase. Being a gas, CO rapidly diffuses through tissues and binds to hemoglobin (Hb) increasing carboxyhemoglobin (COHb) levels. COHb can be formed in the erythrocytes or in plasma from cell-free Hb. Herein, it is discussed whether endogenous COHb is or is not an innocuous and inevitable metabolic waste product and it is hypothesized that COHb has a biological role. In the present review literature data is presented to support this hypothesis based on two main premises: (i) there is no direct correlation between COHb levels and CO toxicity; and (ii) COHb seems to have a direct cytoprotective and antioxidant role in erythrocytes and in hemorrhagic models in vivo. Moreover, CO is also antioxidant by generating COHb, which protects against the pro-oxidant damaging effects of cell free Hb. Up to now COHb has been considered as a sink for both exogenous and endogenous CO generated during CO intoxication or heme metabolism, respectively. Hallmarking COHb as an important molecule with a biological (and eventually beneficial) role is a turning point on CO Biology research, namely in CO intoxication and CO cytoprotection.

Dengue is the most prevalent arthropod-borne disease globally and affects approximately 2.5 billion people living in over 100 countries. The increasing geographic expansion of Aedes aegypti mosquitoes which transmit the virus has made dengue fever a global health concern. There are currently no approved antivirals available to treat dengue, and the only approved vaccine used in some countries is limited to seropositive patients. Treatment of dengue therefore remains largely supportive to date; hence research efforts are being intensified for the development of antivirals against dengue. The NS3 and NS5 nonstructural proteins have been the major targets for dengue antiviral development due to their indispensable enzymatic and biological functions in the viral replication process. NS5 is the largest and most conserved nonstructural protein encoded by flaviviruses including dengue. Its multifunctionality makes it an attractive target for antiviral development against dengue, but research efforts are hindered due to its limited structural characterization compared to the NS5 of other flaviviruses like the Zika virus. Increase in structural insights into the dengue NS5 protein will accelerate drug discovery efforts focused on NS5 as an antiviral target. In this review, we will give an overview of the current state of therapeutic development against dengue.

Recently, a breakdown of paracellular and vascular pathways and activated neuroimmune and oxidative pathways were established in (deficit) schizophrenia. The aim of the current study was to delineate a) the differences in these pathways between stable phase, first (FES) and multiple (MES) episode schizophrenia, and b) the pathways that determine the behavioral-cognitive-physical-psychosocial (BCPS)-worsening in FES/MES. This study included 21 FES and 58 FES patients and 40 healthy controls and measured indicants of serum IgA to C1q, and leaky gut, immune activation, and oxidative stress toxicity (OSTOX) biomarkers. We constructed a BCPS-worsening index by extracting a latent vector from symptomatic, neurocognitive, and quality of life data. FES patients showed significantly higher IgA to C1q, cadherin, catenin, plasmalemma vesicle-associated protein, and IgA/IgM to Gram-negative bacteria than FES patients and controls. In FES patients, the BCPS-worsening score was predicted (48.7%) by IgA to Klebsiella pneumoniae and lowered paraoxonase 1 activity. In MES patients, the BCPS-worsening score was explained (42.7%) by increased tumor necrosis factor-α, OSTOX, and number of episodes. In schizophrenia, 34.0% of the variance in the BCPS-worsening score was explained by IgA to K. pneumoniae, OSTOX, and number of episodes. Increased IgA to K. pneumoniae was the single best predictor of residual psychotic symptoms in FES and MES. This study delineated different mechanistic processes in FES, including breakdown of adherens junctions, bacterial translocation, and C1q circulating immune complexes; and FES, including immune and oxidative stress neurotoxic pathways. FES and MES comprise different staging subtypes, i.e., FES and MES with and without worsening.

Postpartum depression (PPD) can interfere with the establishment of affective bonds between infant and mother, which is important for the cognitive, social-emotional, and physical development of the child. Rates of PPD have increased during the COVID-19 pandemic, likely due to the added stress and limited support available to new parents. The present study examined whether parenting-related stress, perceived bonding impairments, quality of observed mother-infant interactions and salivary oxytocin levels differ between depressed and non-depressed mothers, along with differential impacts of COVID-19 on depressed mothers. Participants included 70 mothers (45 depressed, 25 controls) with infants aged 2-6 months. All data were collected remotely to ease participant burden during the pandemic. Depression was associated with experiences of heightened parenting-related stress and bonding difficulties. These differences were not observed during mother-infant interactions or in salivary oxytocin levels. Differences in COVID-related experiences were minimal, though depressed mothers rated slightly higher stress associated with returning to work and financial impacts of the pandemic. Findings highlight the importance of early intervention for PPD to mitigate long-term effects on mothers, children, and families. Additionally, they underscore the need for an early intervention to support the developing mother-infant dyad relationship during this crucial time.

The objective of this study was to analyze the effects of a pulmonary telerehabilitation (TR) program in young adults with post-COVID-19 syndrome. The information of sixteen students' medical files were analyzed and allocated to one of two groups (control=CG/experimental=EG). Twelve TR sessions were performed distantly and asynchronously at the EG patients' homes during 4-weeks. The program included diaphragmatic pattern breathing and aerobic exercises. The parameters: i) vital signs (oxygen saturation "SpO2", heart rate "HR", respiratory rate "RR" and blood pressure "BP"; ii) physical capacity “Sit-to-stand test”; iii) cardiorespiratory capacity “6-Minute Walk Test”; and iv) perceived effort "Borg scale" were assessed in both groups. The statistical analyses showed a significant decrease of RR and HR (p < 0.012) accompanied by a significant increase in SpO2 (p < 0.042), physical (p < 0.012) and respiratory (p < 0.028) capacity. The perceived effort decreased significantly in both groups (CG: p < 0.006; EG p < 0.001) only for physical but not for cardiorespiratory capacity (p < 0.106). There were no statistical changes registered in BP (p > 0.05). The current study suggests that a TR program that involves breathing and aerobics exercises is feasible and effective in treating post-COVID-19 syndrome in young patients.

The separator membrane is an essential component of lithium-ion batteries, separating the anode and cathode and controlling the number and mobility of the lithium ions. Among the polymer matrices most investigated for battery separators are poly(vinylidene fluoride) (PVDF) and its copolymers poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE), poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), and poly(vinylidene fluoride-cochlorotrifluoroethylene) (PVDF-CTFE), due to their excellent properties such as high polarity and the possibility of controlling the porosity of the materials through binary and ternary polymer/solvent systems, among others. This review presents the recent advances on battery separators based on poly(vinylidene fluoride) (PVDF) and its copolymers for lithium-ion batteries. It is divided in the following sections: single polymer and co-polymers, surface modification, composites and polymer blends. Further, a critical comparison between those membranes and other separator membranes is presented, as well as the future trends on this area.

Species belonging to the Bauhinia genus, usually known as "pata-de-vaca", are popularly used to treat diabetes. Among them is Bauhinia ungulata var. obtusifolia (Ducke) Vaz, whose leaves are used, as a tea, for medicinal purposes in the Amazon region. The microencapsulation of the aqueous extract of its leaves, containing phenolic compounds, using five different wall materials (maltodextrin: DE11-14, and DE4-7; β-cyclodextrin; pectin, and sodium carboxymethylcellulose) is described in this paper. The microstructure, particle size, thermal behavior, yield, and encapsulation efficiency were investigated and compared using different techniques. Using high-performance liquid chromatography, phenolics, and flavonoids were detected and quantified in the microparticles. Microparticles, obtained with yield and phenolics encapsulation efficiency ranging between 60-83 % and 35-57 %, respectively, showed a particle size distribution between 1.15 and 5.54 µm, spherical morphology, and wrinkled surface. Among them, those prepared with sodium carboxymethylcellulose and pectin proved to be thermally the most stable. They had the highest flavonoid content (23.07 and 21.73 mgRUTE/g Extract) and total antioxidant activity by both the DPPH· (376.55 and 367.86 µmolTrolox/g Extract) and ABTS·+ (1085.72 and 1062.32 µmolTrolox/ g Extract) assays. The chromatographic analyses allowed for quantification, in the microparticles, chlorogenic acid (1.67-1.98 mg/g Extract), p-coumaric acid (0.06-0.08 mg/g Extract), rutin (11.1-12.9 mg/g Extract) and isoquercitrin (0.47-0.53 mg/g Extract), compounds considered responsible for the antidiabetic property attributed to the species.

Angiotensin-converting enzyme 2 (ACE2) is an important player of the renin-angiotensin-aldosterone system (RAAS) in regulating the conversion of angiotensin II into angiotensin (1-7). While expressed on the surface of human cells, such as lung, heart, kidney, neurons, and endothelial cells (EC), ACE2 is the entry receptor for SARS-CoV-2. Here, we would like to highlight that ACE2 is predominant on the EC membrane. Many of coronavirus disease 2019 (COVID-19) symptoms have been associated with the large recruitment of immune cells, directly affecting EC. Additionally, cytokines, hypoxia, and complement activation can trigger the activation of EC leading to the coagulation cascade. The EC dysfunction plus the inflammation due to SARS-CoV-2 infection may lead to abnormal coagulation, actively participating in thrombo-inflammatory processes resulting in vasculopathy and indicating poor prognosis in patients with COVID-19. Considering the intrinsic relationship between EC and the pathophysiology of SARS-CoV-2, EC-associated therapies such as anticoagulants, fibrinolytic drugs, immunomodulators, and molecular therapies have been proposed. In this review, we will discuss the role of EC in the lung inflammation and edema, in the disseminate coagulation process, ACE2 positive cancer patients, and current and future EC-associated therapies to treat COVID-19.

This case report investigates 5 real cases which followed legal channels and were judged by Mato Grosso Court in Brazil. Audio systems served as elements of key evidence on those lawsuits. The goal here is to analyze the cases by using a methodology based on the forensic speaker verification by using the Ordinary Least Squares (OLS) algorithm and to compare results with analyses obtained on real cases. The comparative analysis is assessed for time elapsed for obtaining results, as well as results quality. In Brazil, the lawsuit duration is very important, since the Penal Code foresees prescription after a given time, and it may lead to impunity. Results show that the analysis, by using OLS, generates immediate, effective results when compared to those obtained with traditional methodologies on the studied Brazilian lawsuits.

(1) Background: The purpose of this study was to investigate the relationship between IMO and burnout while assessing the contribution of job demands and resources on increasing internal orientation and worker well-being and, consequently, the levels of perceived performance; (2) Methods: Data were collected between April and December 2021 by completing an online questionnaire, developed in the Google Forms platform. The following descriptive statistics were analyzed: measures of central tendency (mean), dispersion (standard deviation), minimum value and maximum value. Next, Pearson's correlation coefficient was calculated to analyze the relationship between the variables under study.; (3) Results: The results showed the mediating effect of IMO between performance feedback and perceived performance, while burnout mediates the relationship between emotional and technology demands and perceived performance. (4) Conclusions: These conclusions demonstrate that constructive feedback might help a more efficient performance through better internal communication and the positive effects of technology demands could be the result of the interaction between personal and organizational resources.

Research has shown that emotional states may influence the subjective experience of time. The present study involved 111 healthy adult participants and examined the impact of emotional stimuli on time perception, using a time estimation task with four conditions: in one of the conditions, participants estimated the exposure time of a black screen, wherein the duration could vary be-tween 2 to 7 s (condition without emotional interference); in the other conditions, participants es-timated the exposure time (also ranging from 2 to 7 s) of images that would induce pleasant, un-pleasant, or neutral emotions, to which participants were instructed to focus their attention (pleasant, unpleasant, or neutral emotions). The results showed that participants estimated “shorter” time intervals (underestimation) for pleasant and unpleasant images compared to the condition without interference, but no significant differences were found between the neutral condition and the condition without interference. It is suggested that increased attention to an ex-ternal stimuli, regardless of its emotional valence, produces an underestimated perception of time.

Background: The 6-minute walk test (6MWT) is a simple and low-cost method that allows assessment of functional capacity in patients with heart failure (HF). However, the prognostic role of 6MWT in HF remains uncertain. Objectives: We aimed to evaluate the 6MWT as a predictor of mid-term adverse outcomes in patients with HF with mid-range and reduced ejection fraction. Methods: Prospective single-center cohort study that included patients with HF with an ejection fraction under 50% at a specialized outpatient HF service. Patients underwent the 6MWT on admission and were compared according to the distance walked: Group I walked ≥350 meters and group II <350 meters. The primary outcome was a composite of death from any cause or hospitalization for HF decompensation in one-year follow-up. Secondary outcomes were the components of the primary outcome in an isolated analysis. Results: Sixty patients were included, 43.3% male, with a mean age of 61.1 ± 12.9 years and ejection fraction 34.3 ± 10.1%. 52 patients (86.7%) were on guideline-directed triple therapy for HF. The average distance walked in the 6MWT was 395.1 ± 98.8 meters, with 40 patients (66.7%) in group I and 20 (33.3%) in group II. The primary outcome in groups I and II were, respectively, 15,0% and 35,0% (p=0.05). One-year mortality was 5.0% vs 15.0% (p=0.18) and the hospitalization rate was 10.0% vs 20.0% (p=0.28). Conclusions: There was no association of distance <350 meters in the 6MWT with the primary outcome in patients with HF. Despite the higher occurrence of outcomes in group II, the difference was not statistically significant in this analysis. On a selective basis, the 6MWT may be a useful tool for prognostic stratification in HF, if combined with other methods.

Social networks have become the scenario with the greatest potential for the circulation of disinformation, hence there is a growing interest in understanding how this type of information is spread, especially in relation to the mechanisms used by disinformation agents such as bots, trolls, among others. In this scenario, the potential of bots to facilitate the spread of disinformation is recognised, however, the analysis of how they do this is still in its initial stages. Taking into consideration what was previously stated, this paper aimed to model and simulate scenarios of disinformation propagation in social networks caused by bots based on the dynamics of this mechanism documented in the literature. For achieving the purpose, System dynamics was used as the main modelling technique. The results present a mathematical model, as far as disinformation by this mechanism is concerned, and the simulations carried out against the increase in the rate of activation and deactivation of bots. Thus, the preponderant role of social networks in controlling disinformation through this mechanism, and the potential of bots to affect citizens, is recognised.

Reproductively lethal mutations (RLMs) are mutations that, upon expression of the encoded lethal phenotypes, cause individuals carrying them to die or to be sterile. An underappreciated fact is that loss-of-function RLMs in protein-coding genes can be phenotypically shielded by favorable environments rendering these genes conditionally non-essential, or by their sister alleles in diploid organisms. Absent of rigorous mitigation, such phenotype-shielding causes the number of genes incurring RLMs to increase over time, and simultaneously allows each RLM to reach high allele frequencies in a conspecific population. Over-accumulation of RLMs then sets the population up for eventual concurrent expression of large numbers of RLMs, and massive deaths in rapid succession, possibly even population-level extinction. This hypothetical scenario in turn predicts that organismal lineages that evolved means to minimize the allele frequencies of phenotypically shielded RLMs are favored by natural selection. We argue that bottlenecking the genome copies destined for reproduction is a universal strategy adopted by all living beings to compel phenotype-based RLM purging. We further postulate that primitive RNA replicons must first evolve bottlenecked reproduction before evolving the capacity to encode diffusible products. In more complex, multicellular organisms, RLM management through bottlenecked reproduction gains additional reinforcement through sexual reproduction. In short, the evidence chronicled in this essay strongly suggest that the Bottleneck, Isolate, Amplify, Select (BIAS) principle, originally proposed to explain intracellular evolutionary dynamics of viruses, may be universally applicable to all living beings.

The present study aimed to evaluate the technical feasibility of using a calcined aggregate with mining residue in different pavement layers, including base, sub-base, and wearing course. For this purpose, the physical characterization of the residue and clay was performed, as well as the production of calcined aggregates at temperatures ranging from 800ºC to 1100ºC. Additionally, the suitability of these aggregates in pavement layers was assessed, considering the current standards. The physical results characterization indicated that the studied clay is suitable for manufacturing calcined clay aggregates since the particle size distribution showed ceramic potential - according to the Winkler diagram - and presented a plasticity index (PI) higher than 15%. In the tests of boiling-induced mass loss and unit mass, the values obtained were within the limits established by the standards, being lower than 10% and 0.88 g/cm3, respectively. Regarding the abrasion loss test, the M1100 aggregate showed "Los Angeles" abrasion values lower than the limit established by the standard, demonstrating its potential as an artificial aggregate in pavement applications.

Considering tumors from an evolucionary perspective, successive tumor cells undergo turnover in response to stressful conditions which pressures tumor cells to adapt to a new environment. Tumor cells uses parts of themselves to communicate and share biological information, known as extracellular vesicles (EV) secretion to promote their survival and “survive to each and every metabolic cost”. Tumor microenvironment (TME) is a miscellaneous of cells, factors, extracellular matrix proteins and EVs. EVs include smalls (<160nm, exosomes) and larger (100-1,000nm, microvesicles) lipid bilayer enclosed packages of biomolecules that are shed by tumors to TME. Tumor-derived extracellular vesicles transfer adaptative stress signaling to recipient cells, reprograming these cells. Heat Shock Proteins (HSP) are more prominent stress response regulators found in exosomes. HSP-loaded exosomes actively reprogram tumor and TME cells to acquire mechanisms that contribute to tumor progression and therapy resistance. The intercellular communication mediated by HSP-loaded EVs favors the escape of tumor cells from, endoplasmic reticulum (ER) stress, hypoxia, apoptosis and anti-cancer therapies. Extracellular HSPs activate and deactivate immune response, induce cell differentiation, changes vascular homeostasis, and help to augment the pre-metastatic niche formation. Here we will explore the EV mechanism of HSP transmission among TME cells and the relevance of these intercellular communications for resistance to therapies in cancer.

During embryo development, the endoplasmic reticulum (ER) acts as an important site for protein biosynthesis, however, in vitro culture (IVC) can negatively affect ER homeostasis. Thereby, the aim of our study was to evaluate the effects of supplementation of tauroursodeoxycholic acid (TUDCA), an ER stress inhibitor, in the IVC of bovine embryos. Two experiments were carried out: Exp. 1: evaluation of blastocyst rate, hatching kinetics and gene expression of hatched embryos after being treated with different concentrations of TUDCA (50, 200 or 1,000 μM) in the IVC; Exp. 2: evaluation of the re-expansion, hatching, and gene expression of hatched embryos previously treated with 200 µM of TUDCA at IVC and submitted to vitrification. There was no increase in the blastocyst and hatched blastocyst rates treated with TUDCA in the IVC. However, embryos submitted to vitrification after treatment with 200 µM of TUDCA, increased hatching rate post-warming, together with a down-regulation in the expression of ER stress-related genes and the accumulation of lipids. In conclusion, this work showed that the addition of TUDCA during in vitro culture can improve the cryotolerance of the bovine blastocyst through the putative modulation of ER and oxidative stress.

The literature, aimed at understanding the income-price elasticity of air passenger demand, bases its analysis on airport movement. The diversity of studies regarding the casualty between air transportation and economic growth are examples. Some studies covering this link, estimate the income-price relationship with the demand considering international traffic. Considering a domestic setting, where this traffic is significant in Brazil, studies related to remote regions are scarce, and the existing ones focus on governmental policies and subsidies. In addition, empirical studies on the theme consenter themselves in developed regions, such as Europe, North America, and Australia. For Brazil, where we find the Amazon region, there are no empirical researches. This paper analyses the price-income elasticity of the demand regarding domestic passengers in air links from remote cities of the Brazilian Amazon. This study uses panel data regression analysis method on a database of domestic scheduled flights of Brazil´s National Civil Aviation Agency. The results show that air passengers involving remote region flights present a lower sensitiveness regarding local income and airline´s price variations than those in flights among capitals. The higher difference is in income-elasticity of the remote city of origin, which is lower than that of the air traffic among capitals.

Entropion is a condition characterized by the total or partial inversion of the eyelid margin, resulting in contact between the outer skin and the corneal or conjunctival surface, and sometimes both. This condition can affect various animals, including horses, pigs, goats, sheep, rabbits, felines, and particularly canines. It typically manifests in the lower lid's lateral portion but can affect any part of the lid. This contact between eyelashes or facial hair and the cornea or conjunctiva leads to severe irritation, causing self-inflicted trauma, as evidenced by clinical signs of pain, irritation, ulcerations, and vision loss. Entropion can be classified as primary (congenital or developmental) or secondary (spastic and scarring). Diagnosis relies on clinical signs, the animal's history, and its breed. It's essential to assess the degree of entropion in the dog without applying topical anesthesia. This study conducts a literature review on surgical techniques for correcting various types of entropion in canines.

In recent years, with the development of social media, people are more and more inclined to upload text, pictures and videos on the platform to express their personal emotions, thus the number of short videos is increasing and becoming the first choice for people to socialize. Unlike the traditional way, people can convey their personal emotions and opinions through media other than words, such as video images, etc. for external information. Therefore, the expression and analysis of emotions is not only through text, but also through the analysis of emotional needs in images and videos, and the research scholars have customized products for individual users. Compared with pure text content, video information can more intuitively express users' happiness, anger and sorrow, thus short video-related applications have gained more and more popularity among Internet users in recent years. However, not all short videos on social networking sites can accurately express users' emotions, and related text information can more accurately assist sentiment analysis and thus improve accuracy. However, short video sentiment analysis based on video frame images is inaccurate in some scenarios, such as when expressing tears of joy, the sentiment expressed by the user's facial expression and voice are different, which will cause errors in the analysis of sentiment. As a result, researchers began to consider multimodal sentiment analysis to reduce the impact of the above scenarios on short video sentiment analysis. This paper focuses on proposing a sentiment analysis method for short videos. We first propose a residual attention model to make full use of the information in audio to classify the emotions contained in them. Then the text information in the dataset is classified by feature extraction. The key to extract features from text information is not only to retain the semantic information of the text, but also to explore the potential emotional information in the text, so as to ensure the integrity of the text information features. The experiments show that the sentiment analysis model proposed in this paper is more superior than the baselines.

The ceramic pastes of ca. 31 samples recovered from the Almaraz archaeological site, located in the south bench of Tagus River, were studied in detail using XRF, micro-Raman and GSDR spectroscopies, as well as the XRD technique. The ceramic sherds could be grouped into six categories, Red Slip tableware, Decorated tableware, Yellow Slip tableware, Grey tableware, Common tableware and Handmade pottery. Our studies of the mineralogic composition of the sherds` body indicate that all ceramics were produced locally, using silicious clays in most cases and calcareous clays in a few ones. Micro-Raman and ground state diffuse reflectance absorption spectroscopy provided useful information regarding the materials used to produce the coloured ceramics: hematite and brookite for the red slip and decorated ceramics, jacobsite or carbon black for the black decoration or grey ceramics. For the yellow slip tableware a simple engobe rich in yellow clay was used. XRF spectroscopic studies provided the elemental composition of all samples, and biplots of the Potassium (K) versus Calcium (Ca) contents, normalized to the silicon content of each ceramic paste, clearly show that Pliocene and Miocene local clays sources were used to produce most ceramics. Only one sherd can be considered a Lisbon production.

The ceramic sherds from approximately 20 samples of lead-glazed tableware, recovered from diverse archaeological sites, including three repurposed storage pits transformed into dumpsters within the medieval city of Santarém (13th-14th century), underwent a meticulous examination. This investigation utilized techniques such as micro-Raman, ground state diffuse reflectance absorption, and X-ray fluorescence spectroscopies, in addition to X-ray diffraction and stereomicroscopy. A parallel study was conducted on contemporaneous European ceramics (glazed sherds) sourced from archaeological sites dating back to the 13th-15th centuries in Saintonge (France), Ardenne, Zomergem, and Bruges (Belgium), as well as Surrey-Hampshire, Kingston, and Cheam (England). The colour of the ceramic bodies is predominantly white or whitish, with a few exhibiting a vivid red hue. Ceramic sherds with a light paste composition were likely crafted using kaolin clays as raw materials. Analyses of fabric, mineralogical, and elemental composition of the sherds suggest that the majority of Santarém's glazed ceramics were locally or regionally produced, potentially derived from a Pliocene kaolin-rich sand formation. However, this conclusion is not supported by the absence of discovered lead glaze kilns or workshops in Santarém for the late Middle Ages. A distinctive feature from the European workshop ceramics lies in the quartz temper content and fabric.

In the software development process, the decision-maker (DM) has a range of problems inherent to its function. Wrong choices during software planning can bring great risk to the project. Therefore, the planning of software releases to be delivered to the customer should be well done. This is not an easy task because releases are made up of many requirements that contain complex variables that must be considered, such as precedence, cost, requirement stability, among other features that make the requirements-selection process challenging. To make this process less exhaustive, DM can use tools that facilitate this work. In software engineering, we can find fields of research specialists in this context, such as Search-Based Software Engineering (SBSE). The SBSE makes use of advanced metaheuristics to search for optimal solutions or the closest to it. In this work, we try to use another field of research to solve this same problem type, the Verbal Decision Analysis (VDA). To do this, we elaborate a workflow that will use the same source data, execute two solutions using the two search fields (SBSE and VDA) and compare the results. In the end, we evaluated and commented on the results.

The aim of this study was to assess precipitation (P) by analyzing data from in situ stations compared with those from solely remote sensing products CHIRP and CMORPH, with a reference station in the city. The evapotranspiration (ET) was analyzed directly using SSEBop. The region chosen for this study was the Metropolitan Area of Belem (MAB), close to the estuary of the Amazon River and the mouth of the Tocantins River. Belem is the rainiest state capital of Brazil, which causes a myriad of problems for the local population. The monthly best fit is shown here. In this study, we analyzed P and ET from local stations and compared them with those from satellite products. The main metrics RMSE, NRMSE, MBE, R2, Slope, and NS were used. For the reference station, the automatic and conventional CHIRP and CMORPH results, in mm/month, were as follows: automatic CHIRP: RMSE = 93,3, NRMSE = 0.32, MBE = −33,54, R2 = 0.7048, Slope = 0.945, NS = 0.5668; CMORPH: RMSE = 195,93, NRMSE = 0.37, MBE = −52,86, R2 = 0.6731, Slope = 0.93, NS = 0.4344; conventional station CHIRP: RMSE = 94.87, NRMSE = 0.32, MBE = −33.54, R2 = 0.7048, Slope = 0.945, NS = 0.5668; CMORPH: RMSE = 105.58, NRMSE = 0.38, MBE = −59.46 R2 = 0.7728, Slope = 1.007, NS = 0.4308. This was compared with the pixel and in situ station data. The ET ranges, on average, between 83 mm/month in the Amazonian summer and 112 mm/month in the Amazonian winter. This work concludes that, although CMORPH has a coarser resolution of 0.25° compared to CHIP’s 0.05° for MAB at a monthly resolution, the remote sensing products were reliable. SSEBop also showed reliable performance. For analyses of the consistency of precipitation time series, these products could provide more accurate information.

Hox genes represent an important gene family that is involved in the segmentation pattern and identity of the segments during the formation of the body plan in metazoans. For many years, several studies have sought to establish a correlation between the evolution of these genes and the evolution of large groups of metazoans. Here, we use publicly available sequences of Hox gene clusters to reconstruct the evolutionary history of anterior Hox genes. We show that information harbored by these genes, in part, reflects the evolution and diversification of most animal archetypes, but in many cases, there were conflicts between the evolutionary history of some genes and the history of large groups, these cases may have occurred due to specific and similar selective pressures in relatively distant groups, which may have led to evolutionary convergences. Our findings also reveal that the evolution of Hox genes (and clusters) as a multigene family is consistent to a birth-and-death model constrained by development, where there is a trade-off between a relatively fast gene turnover and their central developmental roles

Thermal comfort is extremely important in architecture, especially in environments with more people spending longer on studies or intellectual activities. This research describes a case study to investigate university buildings' energy and thermal performance as a part of the ANEEL program. Due to this importance, and the need to save energy in Brazilian public buildings, the ANEEL-the Brazilian Energy Electricity Regulatory Agency, launched 2016 a national program focusing on energy efficiency in public universities around the country. University offices and classrooms require high intellectual effort; thus, environmental comfort is critical for maintaining its users' physical and mental health. This study included a pre-diagnosis of the performance of the envelope, lighting, and air conditioning systems and a survey about the quality of the environments from the users' point of view. The Prescriptive Method of the Brazilian Labeling Program (PBE) for Commercial, Service, and Public Buildings (RTQ-C) assessed the building performance. Statistical analysis was applied to correlate the quality and thermal preference of the users from the PMV/PPD. The results showed a high rate of thermal discomfort in both environments of the studies, even when using air conditioning.

ABSTRACT: Aims: This study aimed to explore the impacts of neighborhood-level socioeconomic contexts (e.g., income, education) on the therapeutic and preventative dental quality outcome of children aged 3 to 15 years. Materials and Methods Anonymized billing data of 842 patients reporting to a university Children’s Dental over three years met the inclusion criteria. Their access to care (OEV-CH-A), topical fluoride application (TFL-CH-A) and dental treatment burden (TRT-CH-A) were determined by dental quality alliance (DQA) criteria. The three oral health variables were aggregated at a neighborhood-level and analyzed with census data provided by Statistics Canada within a GIS framework. The forward sortation area (FSA) was chosen as a neighborhood spatial unit and regression models were run both the individual and neighborhood level. Results: The individual-level regression models showed significant negative associations between OEV-CH-A (p=0.027) and TFL-CH-A (p=0.001) and the cost of dental care. There was a significant negative association between TRT-CH-A and median household income. Neighborhood-level Ordinary Least Squares (OLS) linear regression models show negative associations of all three dental health variables (OEV-CH-A, TFL-CH-A, TRT-CH-A) with median household income and the number of households without a college degree. Conclusion: GIS and spatial quantitative approaches may be an effective tool to explore the impacts of socioeconomic variables on oral health outcomes.

The Brazilian livestock is predominantly extensive, with approximately 90% of the production being sustained on pasture, which occupies around 20% of the territory. In the current climate change scenario and where cropland is becoming a limited resource, there is a growing need for a more efficient land use and occupation. It is estimated that more than half of the Brazilian pastures have some level of degradation; however there is still no mapping of the quality of pastures on a national scale. In this study, we mapped and evaluated the spatio-temporal dynamics of pasture quality in Brazil, between 2010 and 2018, considering three classes of degradation: Absent (D0), Intermediate (D1), and Severe (D2). There was no variation in the total area occupied by pastures in the evaluated period, in spite of the accentuated spatial dynamics, with a retraction in the center-south and expansion to the north, over areas of ​​native vegetation. The percentage of non-degraded pastures increased ~12%, due to the recovery of degraded areas and the emergence of new pasture areas as a result of the prevailing spatial dynamics. However, about 44 Mha of the pasture area is currently severely degraded. The dynamics in pasture quality were not homogeneous in property size classes. We observed that in the approximately 2.68 million properties with livestock activity, the proportion with quality gains was twice as low in small properties compared to large ones, and the proportion with losses was three times greater, showing an increase in inequality between properties with more and less resources (large and small, respectively). The areas occupied by pastures in Brazil present an unique opportunity to increase livestock production and make available areas for agriculture, without the need for new deforestation in the coming decades.

The activity of prioritizing software requirements should be done as efficiently as possible. Selecting the most stable requirements for the most important customers for the development company can be a positive factor when we consider that the available resource does not always encompass the implementation of all requirements. Quantitative methods for reaching software prioritization in releases are many in the field of Search-Based Software Engineering (SBSE). However, we show that it is possible to use qualitative Verbal Decision Analysis (VDA) methods to solve this same type of problem. Moreover, we will use the ZAPROS III-i methods to prioritize requirements considering the opinion of the decision-maker, who will participate in this process. Finally, the results obtained in the VDA structured methods were quite satisfactory when compared to the methods using SBSE. A comparison of results between quantitative and qualitative methods will be made and discussed later.

(1) Context: Cancer triggers significant changes in family dynamics. It is noteworthy that coping and problem-solving skills, particularly in situations involving cancer in children and adolescents, have not been adequately explored in the context of family adaptation. This study aims to analyze the effectiveness of family interventions in coping to improve problem-solving skills in parents and/or caregivers of children and adolescents during and after oncological treatment. (2) Methods: This is a scoping review following the recommendations of the Joanna Briggs Institute and the Systematic Reviews and Meta-Analyses Extension for Scoping Review (PRISMA-ScR), from 2014 to 2024, in the databases LILACS, CINAHL, SCOPUS, Web of Science, and PUBMED. (3) Results: Forty-five studies were eligible. Coping strategies were categorized as follows: (1) positive attitudes (including a sense of courage and hope, family support to enhance resilience, and future planning), (2) caregiver empowerment (involving acceptance of diagnosis, emotional distancing, and coping through religiosity), and (3) communication skills (encompassing professional communication, horizontal dialogue with healthcare teams, and sincere communication with friends and family). (4) Conclusions: Over time, families develop coping and problem-solving strategies that influence changes in family functioning patterns, aiding them in accepting, reinterpreting, and reframing ideas and feelings associated with neoplasia.

The potential of social networks for the circulation of disinformation as a strategy of diplomacy has been of great interest to the academic community, but the way in which it is propagated and modelled is still in its beginnings. This article aimed to simulate the propagation of disinformation in social networks derived from the diplomacy strategy, based on the elements of the system. For the design of the simulation model, system dynamics was used as the main technique in the research methodology in conjunction with statistical analysis. Five computational simulations were run for the adoption methods of susceptible and uninformed population, misinformation techniques and echo chamber. The developed model found that the diplomacy disinformation agent is able to spread its message efficiently through the bot outreach mechanism and only a part of the susceptible population unsubscribes to the disinformation agent's account. Significant differences were identified in the absence of paid outreach, bots and trolls in the propagation of information, and in the variation in the timing of disinformation propagation. Consequently, the developed model allows the understanding of the problem of disinformation as a strategy of diplomacy from international rather than local dynamics, as well as the effects of the use of each element in the system.

The use of plant fibers as reinforcement in composites with the aim of totally or partially replacing synthetic fibers has received significant attention in the last years. However, one of the disadvantages of the use of these fibers in polymeric composites is associated to the fact that they are hydrophilic, resulting in poor adhesion with most matrices when in the presence of moisture. In addition, another problem encountered is the lower strength of this type of fiber and, as a solution to minimize these problems, the composite can be hybridized by adding layers of natural and synthetic fibers and the use of resin protection along the thickness of the composite. (Lateral protection) to reduce moisture absorption by the laminate. The objective of this work is to obtain composites formed by five layers of reinforcement and terephthalic polyester matrix, one of which is reinforced only with short glass fiber-E blanket, another reinforced only with jute fiber and a third hybrid containing the fibers. Two types of reinforcements with interlayer layers. Afterwards, the loss of mechanical properties was observed when these materials were immersed in distilled water, with and without lateral protection, until reaching saturation. We evaluated parameters such as the influence of configuration type and environmental conditions, such as the amount of water absorption. The obtained results show that the hybrid composite obtained a behavior close to the composite containing only fiberglass, and better than the one containing only jute fiber and that the absorption was smaller in the samples with side protection.

Drying grains in a fixed bed can be an interesting alternative to prevent undesirable breaks and fractures of solids due to mechanical shocks, something that cannot be avoided when drying in moving beds. A disadvantage of fixed bed drying is that there can be significant gradients in the critical variables if the layer of particulate solids is thick. This work shows that periodically changing the direction of drying air flow is an effective technique to reduce differences within the bed and allow better uniformity of the product. Drying in a thick layer of 10 cm of sorghum grains was carried out at 50 and 60oC for air flow velocity of 2.1 m.s-1. The results showed that despite increasing the total drying time, the technique actually allowed a significant decrease in the temperature gradients and moisture content of the sorghum grains. The change in direction of the air flow caused the drying front to be displaced, sometimes towards the top, sometimes towards the base of the bed. At 50oC, drying lasted a total of 240 min, bringing the sorghum grains to an average overall moisture content of 0.13 on a dry basis.

Curcumin [1,7-bis(4-hydroxy-3-methoxyphenyl)-1,6-heptadien-3,5-dione], a component of Curcuma longa L. rhizomes, displays various biological and pharmacological activities. However, it is poorly bioavailable and unstable in physiological pH, which has led more stable and effective curcumin analogs (e.g., monoketone curcuminoids, or MKCs) to be synthesized, and their biological activities to be described. In this review, we cover papers published between 2019 and 2023 on the antimicrobial, anticancer, antioxidant, and antiparasitic actions as well as other less common MKC biological and pharmacological activities. We also address the Claisen-Schmidt condensation as a standard procedure to synthesize MKCs.