The coffee industry loses millions of dollars annually worldwide due to the Coffee Berry Borer (CBB); these losses imply a decrease in quality and production. Traps are used to monitor their flight and for pest control. The main objective was to determine the flight pattern and trap capture percentages of the CBB population over time using column traps (CTs) in two independent field experiments. CTs were composed of four traps installed at four different heights 0.5, 1.5, 2.5, and 3.5m above ground. Our results demonstrated a significant difference in CBB capture by traps placed at different heights above the ground. The CT capture maintained a pattern throughout this study's lag; the lower the height, the greater the percentage of CBBs captured. In Experiments A and B, the traps placed at 0.5m caught 67% and 85% of the CBBs captured, respectively. Furthermore, the trap set at 1.5m above the ground in the multi-level CT showed a higher capture percentage than the individually placed trap (also at 1.5m). The pattern of the capture and proportion of the CBB in the CTs were maintained throughout the study despite the season, changes in temperature, and relative air humidity. We suggested that CTs could be explored as a useful tool for capturing the CBB, considering its monitoring and management.

Linear programming formulations of forest ecosystem management (FEM) problems proposed in the 60s have been adapted and improved upon over the years. Generating management alternatives for forest management planning is a key step in building these models. Global forests are diverse, and a variety of models have been developed to simulate management alternatives. Climate change has made forest management calculations even more complex, requiring flexibility, diverse parameters, models, and methods. Despite this complexity, consistent concepts can be applied in developing management alternatives for forest management planning. This work describes iGen, a flexible forest prescription generator that applies the AI technique Rule-Based System (AI-RBS). iGen projects the state and associated inputs and outputs for a set of management units using rules from its knowledge base. An Inference Engine uses the rules to simulate a set of prescriptions in a tree-like graph structure. Without needing IT specialists, forest managers can describe the potential development of their forest through variables, rules, formulas, functions, and procedures. A key feature of iGen is that it is not limited to, adapted to, or focused on any specific region, landscape, forest condition, projection method, or yield function. Instead, it aims to maximize generality, enabling it to address a broad range of FEM problems. This article introduces iGen, explaining its concepts, structure, and algorithms through two FEM problems: natural regeneration with shelterwood harvests and plantation/coppice. For data and iGen source programs, visit github.com/…/iGen.

The Southern king crab, Lithodes santolla, is an important fishery resource in the inner seas of Chilean Patagonia. The fishing gear used to catch Southern king crab (bait trap) and its operation at different depths over several months provide the opportunity to gather information about relative abundance. The aim of the present study was to analyze the information collected from the catches of Southern king crab and its associated fauna in the Magdalena Fjord to study the biodiversity and ecology of scavenging decapod crustaceans. Specifically, the study aimed to determine the bathymetric patterns of abundance by species, to model the abundance by season (winter and spring) and to determine the structuring pattern of scavenging decapods assemblage. Samples were collected between June and November 2019 by deploying traps in four bathymetric strata: 1 = 0–50 m; 2 = 51–100 m; 3 =101–150 m; 4 = 151–200 m. We registered a total of 673 decapod specimens associated with the Southern king crab fishery, representing five species: Lithodes santolla (n = 96), Libidoclaea smithii (n = 10), Metacarcinus edwardsii (n = 58), Munida gregaria (n = 507) and Peltarion spinulosum (n = 2). The abundance of decapod species varied by month and bathymetric strata. We found bathymetric patterns for L. santolla abundance, M. gregaria, M. edwardsii, and total species abundance. The most informative model to explain scavenging decapod abundance by GLM included species and season. The null model of species co-occurrence analysis revealed that all species associations during the sampled months were random. Our study is the first that provides evidence about patterns of bathymetrical and temporal variation of scavenging decapod abundance and expands the body of knowledge regarding the biodiversity of scavenger decapods in the Magdalena Sound, which currently is affected by multiple stressors such as climate change and anthropic activities (aquaculture and fisheries).

The mucopolysaccharidoses (MPS) are a group of 11 lysosomal storage diseases (LSDs) produced by mutations in the enzymes involved in the lysosomal catabolism of glycosaminoglycans. Most of the mutations affecting these enzymes may lead to changes in processing, folding, glycosylation, pH stability, protein aggregation, and defective transport to the lysosomes. The use of small molecules, called pharmacological chaperones (PCs), that can restore the folding, trafficking and biological activity of mutated enzymes has been extensively explored in LSDs as a therapeutic alternative. PCs have the advantage of wide tissue distribution, potential oral administration, lower production cost, and fewer issues of immunogenicity. In this paper, we will review the advances in the identification and characterization of PCs for the MPS. These molecules, mainly based in molecules mimicking the enzyme substrates, have been described for MPS II, IVA, and IVB, showing a mutation-dependent enhancement of the mutated enzymes. Although the results show the potential of this strategy, further studies should focus in the development of disease-specific cellular models that allow a proper screening and evaluation of the identified PCs. In addition, in vivo evaluation, both pre-clinical and clinical, should be performed, before they can become a real therapeutic strategy for the treatment of MPS patients.

Obesity is a risk factor for the development of gestational diabetes mellitus (GDM). However, the most optimal type of nutritional intervention to prevent GDM in high-risk women is not clearly defined. This study investigates if nutritional treatment based on the Mediterranean diet (MedDiet) before 12th gestational week (GW) in women at high risk due to a body mass index (BMI)≥25kg/m2, reduces the rate of GDM and metabolic syndrome (MetS) at 3 years postpartum. We performed a post-hoc analysis of the San Carlos Gestational Prevention Study. A total of 735 women with BMI≥25kg/m2 were evaluated between 2015-2018, 246 in standard diet control group (CG) and 489 in MedDiet intervention group (IG). The rate of GDM was significantly lower in IG compared to CG (25.1%vs31.7%;p=0.037). Postnatal follow-up was completed by 141 women in CG (57%) and 312 women in IG (64%). At 3 years postpartum, we observed a reduction (relative risk 95% confidence interval) in the rates of impaired fasting glucose (IFG) (0.51 (0.28-0.92);p=0.019), obesity (0.51 (0.28-0.92),p=0.041), waist circumference (WC)≥89.5cm (0.54 (0.31-0.94);p=0.022) and MetS (0.56 (0.33-0.94);p=0.003). MedDiet reduces the rate of GDM and postpartum MetS in women with BMI)≥25kg/m2, suggesting that its implementation should be routinely recommended from the first GWs.

: The performance of the students in academics depends on many different factors. One of these factors is the economic status of their families. Education in public schools, though it is free, some parents cannot afford to send their children to school due to financial constraints. Education as a free is every individual's right in society, but it becomes a privilege because of a lack of financial support. This research work is a comparative study of students' or learners' performance in mathematics among students from working and non-working. This research article's ultimate objective is to investigate and compare a significant difference in their performance in the subject mathematics. The research methodology utilizes a t-test to analyze and synthesize primary data sources collected via interview and academic records, and diverse literature on the study area. However, the research findings revealed no significant difference in the two groups (the working and non-working group of learners). Therefore, it is recommended that secondary schools should be provided with adequate books and facilities and faculty school interventions and programs and promote the usage of SIM or Strategic Intervention Materials for learning and memory enhancement among learners.

Background. Increasing evidence demonstrate that concentration of protein in infant formula >1.9g/100Kcal with high levels of insulinogenic aminoacids is associated with accelerated weight gain, increased fat mass accumulation and risk of adiposity. Purpose of this study was to conduct a systematic review to determine the metabolic effects in infants feed with infant formula optimized in protein. Methods. Systematic review was conducted according PRISMA Statement. RCTs with one intervention group (infant formula with 1.6-1.9gr of protein/100Kcal) and at least one comparative control group (infant formula with >1.9gr of protein/100Kcal) were included. Standardized mean differences (SMD), through random model were calculated. Results. 15 RCT were included. Optimized protein in infant formula was associated with less gain of BMI at 24 months of follow-up (SMD -0.25, IC95% -0.36 to -0.13, p 0.01) and less fat mass accumulation (SMD -0.68, IC95% -0.98 to -0.37, p 0.01). Optimized protein was also associated to less gain of weight, weight/age Z-score, weight/length Z-score, BUN (mmol/dL) and IGF1 (ng/ml). No effect on length/age Z-score was observed. Conclusions. Robust evidence showed optimized protein (1.6gr/100Kcal to 1.9gr/100Kcal) in infant formula is associated with metabolic benefits in infants with less weight gain, BMI and fat mass accumulation.

Transcriptional regulation constitutes a key step in gene expression regulation. Myocyte enhancer factor 2C (MEF2C) is a transcription factor of MADS box family involved in the early development of several cell types including muscle cells. Over the last decade a novel layer of complexity modulating gene regulation is emerging as non-coding RNAs have been identified, impacting in both transcriptional and post-transcriptional regulation. microRNAs represent the most studied and abundantly expressed subtype of small non-coding RNAs and their functional role have been widely documented. On the other hand, our knowledge on the transcriptional and post-transcriptional regulatory mechanisms that drive microRNA expression is still incipient. We recently demonstrated that MEF2C is able to transactive the long, but not short, regulatory element upstream of miR-23a-miR-27a-miR-24-2 transcriptional start site. However, MEF2C over-expression and silencing, respectively, displayed distinct effects on each of the miR-23a-miR-27a-miR-24-2 mature cluster members, without affecting pri-miRNA expression levels, supporting thus additional MEF2C-driven regulatory mechanisms. Within this study we demonstrated a complex post-transcriptional regulatory mechanisms directed by MEF2C in the regulation of miR-23a-miR-27a-miR-24-2 cluster members, distinctly involving different domains of the MEF2C transcription factor and the physical interaction with pre-miRNAs and RNA interacting proteins such as Ksrp, HnRNPa3 and Ddx17.

The hybrid in-band on-channel (IBOC) transmission system as a digital audio radio scheme could transmit analog FM and digital audio simultaneously. In IBOC systems, broadcasters transmit signals within the allocated channel bands, so the bandwidth allocated for digital audio transmission is a big challenge. In view of the above, the use of cooperative game theory, supported by the use of the bankruptcy game and Shapley's value, is proposed as a strategy to optimize the bandwidth allocation at each node or station, according to the demand in the service, the number of stations and the radio channel conditions in the FM band. The paper proposes a scenario under saturated traffic conditions, in order to evaluate the degree of optimization that the Shapley value can perform under clearly established traffic and channel conditions. The evaluation process yielded a quite favorable result, where it is observed that the use of cooperative game theory supported by the Shapley value can be considered as an excellent alternative when performing bandwidth optimization processes for digital broadcasting over IBOC in FM and with the possibility of being implemented in other digital radio broadcasting systems.

Linear programming models have been used in forest management planning since the 1960s. These models have been formulated in three basic ways: Models I, II, and III, which are defined by the sequences of management unit states represented by the variables. In Model I, variables represent sequences of states from the beginning of the planning horizon to the end. In Model II, variables represent sequences of states from one intervention to the next. Finally, in Model III, variables represent a single arc in a management unit’s decision tree, i.e., two states. The objectives of this paper are to clarify the definitions of these model variations and evaluate the advantages and disadvantages of each model. This second objective was achieved by formulating a case study problem using each model type. The case study includes three increasingly complex scenarios, each incorporating additional ecosystem services. Results show that despite having more variables and constraints, Model III requires the least time to formulate due to its less dense parameter matrix. Model II has the shortest solution times, followed closely by Model III, while Model I requires the longest times for both formulation and solution. These results are increasingly apparent in more complex scenarios.

Gestational diabetes mellitus (GDM) pathophysiology comprises clinical and genetic factors. In fact, GDM has been associated with several single nucleotide polymorphisms (SNPs). This study aimed to build a prediction model of GDM combining clinical and genetic risk factors. A total of 1588 pregnant women from the San Carlos Cohort participated in the present study, 1069 (67.3%) Caucasian (CAU) and 519 (32.7%) Latin American (LAT), 255 (16.1%) with GDM. The incidence of GDM was similar in both groups (16.1% CAU and 16.0% LAT). Genotyping was performed by IPLEX Mass ARRAY PCR selecting 110 SNPs based on literature references. The SNPs showing the strongest likelihood of GDM development were the rs10830963, rs7651090 and rs1371614 in CAU and rs1387153 and the rs9368222 in LAT. Clinical variables including age, pre-pregnancy body mass index and fasting plasma glucose (FPG) at 12 gestational weeks predicted the risk of GDM (AUC 0.648, 95%CI 0.601-0.695 in CAU; AUC 0.688, 95%CI 0.628-9.748 in LAT) and adding the SNPs modestly improved prediction (AUC 0.722, 95%CI 0.680-0.764 in CAU; AUC 0.769, 95%CI 0.711-0.826 in LAT). In conclusion, adding genetic variants enhanced the prediction model of GDM risk in CAU and LAT pregnant women. An RCT is underway to demonstrate its usefulness

This paper provides a framework for the assessment of household-level risk, incorporating both a individual social risk perspective and a location-based perspective. We use this framework as a heuristic to explore the effect of social reintegration choices individuals face, which are not be addressed by current policies. For example, we explore how integrating extended family households during COVID-19 without social distancing may affect household and community risk. The goal is to aid individual decision makers, who are seeking to maintain quality-of-life while navigating local policy, with nuance relating to location-specific behavior and disease prevalence.

The focus of this work lies in the construction of monitoring system designed in the form of a patch using a long-lasting potentiometric electrolyte concentration sensor from metal electrodes, in a galvanic cell configuration Mg(s)|NaCl(aq)|Cu(s). Initially, a mathematical analysis was conducted on the expected sensor output through the Nernst equation. The experimental phase involved conducting controlled tests in the laboratory using various molar concentrations of sodium chloride (NaCl) in aqueous solution. Results showed that the electrolyte sensor allows for monitoring electrolyte levels in NaCl in the range of 0.02 to 1 M/L, with electrode lifespan exceeding 10 days. On the other hand, when patch is using human sweat during controlled exercise routines, it showed the sensor's capability for monitoring changes in the subjects' hydration levels in real time. The sensor output potential is greater than 1.7 volts when the sensor electrodes are in contact with human sweat, which is equivalent to measuring molar concentrations at normal hydration and moderately high hydration levels. Sensor results indicate that the system can function in a self-powered manner without external batteries. Additionally, the extended lifespan of its electrodes allows for continuous monitoring of imbalances in the human body, showcasing the system capability for long-term health assessment.

Background: Mycobacterium avium complex includes the commonest nontuberculous mycobacteria associated with human infections. These infections have been associated with the production of biofilms in many cases, but there are only a few studies about biofilms produced by the species included in this group. Methods: Three collection strains (M. avium ATCC25291, M. intracellulare ATCC13950, and M. chimaera DSM756), three clinically significant strains (647, 657, and 655), and three clinically nonsignificant ones (717, 505, and 575) of each species were included. The clinical significance of the clinical isolates was established according to the internationally accepted criteria. Biofilm ultrastructure was studied by Confocal-Laser Scanning Microscopy using Backlight Live dead and Red Nile stains. Viability, covered surface, height and relative autofluorescence were measured in several images/strain. The effect of clarithromycin was studied the technique described by Muñoz-Egea et al with modifications regarding incubation time. The study included clarithromycin in the culture medium at a concentration achievable in the lungs (11.3 mg/L), using one row of wells as the control without antibiotic. Bacterial viability inside the biofilm is expressed as a percentage of viable cells. The differences between the different parameters of biofilm ultrastructure were analysed using Kruskal-Wallis test. The correlation between bacterial viability in the biofilm and treatment time was evaluated using Spearman's rank correlation coefficient (ρ). Results: The strains showed differences between them with all the studied parameters, but neither a species-specific pattern nor a clinical significance-specific patter were detected. For the effect of clarithromycin, the viability of the bacteria contained in the biofilm was inversely proportional to the exposure time of the biofilm (ρ > -0.3; p-value < 0.05), excluding two M. chimaera strains (M. chimaera DSM756 and 575), which showed a weak positive correlation with treatment time (0.2 < ρ < 0.39; p-value < 0.05). Curiously, despite a clarithromycin treatment of 216 hours, the percentage of biofilm viability of the strains evaluated here was not less than 40% at best (M. avium 717). Conclusions: All the M. avium complex studied strains are able to form biofilm in vitro, but ultrastructural characteristics between them suggest that these are strain-specific characteristics unrelated with neither with the species nor with the clinical significance. The clarithromycin effect on MAC species is biofilm age/time of treatment-dependent and appears to be strain-specific while being independent of the clinical significance of the strain.

Mistrust between scientists and non-scientist stakeholders is a key challenge in fishery management. This problem is exacerbated with the use of complex models to support management: these models suffer from difficulties in communicating their results and a lack of confidence from end users. The European eel is an illustrative example; its complex life cycle raises problems of coordination and discussion among the multiple actors involved in the management of the species. The GEREM model has been proposed as a tool for estimating recruitment, but its complexity, which is essential for addressing the characteristics of the species, makes it difficult to understand and accept by all stakeholders. In the context of the SUDOANG project, we proposed a co-parametrization of this assessment model to tackle this mistrust. Through the use of various questionnaires and appropriate statistical analyses, stakeholders were involved in two important choices for the model (zone definition and prior construction). Regular workshops and presentations were organised to explain the model rationales and to gather feedback and expectations. The results show that stakeholders have very similar perceptions of the potential definitions of sub-areas of recruitment in south-western Europe, and these perceptions are consistent with the underlying environmental conditions. On the other hand, the stakeholders have contrasting opinions about the exploitation rates of fisheries in different river basins, and the use of their knowledge currently has little effect on GEREM estimates. More importantly, the overall approach of this study is thought to have reconstructed the trust and confidence among participants.

As participating molecules in nucleic acids, nucleotides also have signaling functions and act as second messengers in both prokaryotic and eukaryotic cells, the most common example being cyclic AMP (cAMP). In bacteria, a great interest has arisen in studying nucleotide signaling. It has been determined that cyclic di-AMP (c-di-AMP), cAMP, and cyclic di-GMP (c-di-GMP) participate in biological events such as bacterial growth, biofilm formation, sporulation, cell differentiation, motility, virulence, and other. Moreover, these cyclic-di-nucleotides (c-di-nucleotides) produced in pathogenic intracellular bacteria can affect eukaryotic host cells for infection. On the other hand, the nucleotide molecules pppGpp, and ppGpp are alarmones involved in regulating bacterial nutritional stress; they are also considered second messengers. These second messengers can be used as therapeutic agents because of their immunological functions on eukaryotic cells. In this review, different topics on the role of c-di-nucleotides as second messengers in different bacterial processes are addressed.

This study was conducted to propose the Green Economic Development Plan for Manufacturing S.M.E.s based on financial performance and operations thru Green Initiatives. The descriptive survey method used to gather data to determine the green initiative's implementation of small and medium (S.M.E.s) manufacturing enterprises. Green initiatives use as a basis for crafting a green economic development plan. Document analysis was also employed to obtain data from any available printed materials and records provided by the respondents. Such methods of gathering information used to validate data gathered from local and foreign-related literature. The observation also employed to survey the assets owned and validate any green initiatives practiced, including their implementation. The study's findings show that among the green initiatives implemented by SMMEs, which resulted in the reduction of total costs and expenses, were the proper disposal and segregation of waste materials, water management by recycling wastewater and using water-efficient equipment, natural resources, and raw materials management. SMMEs should encourage active participation and support of suppliers and customers in achieving G.E.D.'s objectives by developing incentive schemes.Furthermore, SMMEs should continue to benchmark with G.E.D. Practitioners are operating locally and abroad to adopt best greening strategies and regularly network with concerned government agencies for continuous updating on G.E.D. Initiatives that may benefit the firm. Further research may be conducted on green initiatives implemented by small and medium enterprises in other industry sectors.

Cannabidiol (CBD) is a safe and non-psychotropic phytocannabinoid with a wide range of potential therapeutic antiinflamatory and antioxidant activity. Due to its lipophilicity, it is normally available dissolved in oily phases. The main aim of this work was to develop and characterize a new formulation of a microemulsion with a potential anti-inflammatory and antioxidant action for topical treatment of inflammatory skin disorders. The micro-emulsion system was obtained from a 20% CBD oil as hydrophobic phase, Labrasol/Plurol Oleique (1:1) as surfactant and cosurfactant (S/CoS) respectively and an aqueous vegetal extract obtained from S. ebulus L. ripe fruits, with a potential anti-oxidant and anti-inflammatory activity, as water phase. A pseudo-ternary phase diagram was elaborated, selecting an optimal proportion of 62% (S/CoS), 27% CBD oil and 11% water and, after testing its reproducibility, the aqueous phases were replaced by the vegetal hydrophilic extract. The defined systems were characterized in terms of conductivity, droplet size by laser scattering, compatibility of components by differential scanning calorimetry and rheological properties using a rotational rheometer. The designed microemulsion showed good stability and a slight pseudo-plastic behavior. The release properties of CBD from the oil phase and caffeic acid from the water phase of the microemulsion were studied by in vitro diffusion experiments using flow-through diffusion cells in comparison to a CBD oil and a microemulsion only with CBD as active substance. It was evidenced that the inclusion of the original oil in microemulsions did not provoke a significant modification of the release of CBD, incorporating the possibility of including hydrophilic active compounds in the formulation, stablishing an interesting strategy for the development of future formulations.

Different types of disasters, whether natural or human character, lead to the significant loss of human lives. In the latter case, the quick action of identification of corpses and human remains is mandatory. There are a variety of protocols to identify victims, however, genetics is one of the tools that allow an exact identification of the victim. However, several factors may interfere with this identification, from the biological samples’ degradation not allowing the analysis of nuclear information, to failure to dispose of biological samples from family members. Access to certain family members could be a determinant of the proper choice of genetic markers that allow the identification of the victim, or his/her inclusion in a given genetic maternal or paternal lineage. With the new advances in the genetic field, it is expected to allow soon the identification of victims from disasters only with his/her biological postmortem samples, being possible to draw a robot portrait and its most likely physical characteristics. In all cases, genetics is the only modern tool with universal character and can be used in essentially all biological samples, giving and identification of more or less accurate statistical character, depending on whether nuclear or lineage markers are used.

This paper investigates the effect of Fe contamination on the microstructure and mechanical properties of Al-7Si-0.7Mg-Fe2.5 alloy processed by Laser Powder Bed Fusion (LPBF) and heat treated in two different conditions: (1) Solution Heat Treatment (SHT) at 520 °C, followed by artificial ageing at 160 °C (T6), and (2) Direct Artificial Ageing of the as-printed material at 160 °C (DAA). Microstructural characterization was carried out by Optical Microscopy (OM), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscope (TEM). Mechanical characterization was carried out by tensile tests at room temperature. The formation of fine AlSiFe phases such as α-AlFeSi, β-AlFeSi, and π-Al8Si6Mg3Fe had no deleterious effect on the mechanical properties compared to previous studies for AlSIMg alloys without Fe. However, compared to the as-printed condition, the T6 heat treatment decreased the ultimate tensile strain significantly, while the elongation to the fracture presented a slight improvement.

Background: The tsunami and earthquake occurred in 1927 and 2018 made life quality of Da’a Tribe women in refugee camps was affected by violence. It affects on women reproductive health in various aspects of life as high maternal mortality rate of 450 per 100 thousand live births and half of women victims of natural disasters have reproductive health problems such as anemia and malnutrition during pregnancy. The study objective is to explore the health quality of women related to the couple violence during the humanitarian crisis at refugees’ camps. Method: The population was 798 cases of violence. The 90 samples were selected by simple random sampling and calculated by Slovin method. Data analysis was done by descriptive qualitative and cross tabulation. The research location was Palu City. Results: The research findings showed that health quality of Da’a Tribe women after the couple violence is influenced by three factors, namely economic by 40%, psychological by 7%, violence during pregnancy 59.3%. Conclusion: Social life and women violence handling can be done by symbolizing the threat of criminal law for male perpetrators in accordance with applicable laws in Indonesia and improving the life quality of population, especially women in education and skills through empowering the family economy and increasing gender equality justice.

HIV infection is well-known to be associated with the development of Hodgkin's lymphoma (HL) with extranodal involvement being exclusive bone marrow involvement is less common. Co-infection by other viruses such as the esptein Baar virus (EBV) increases the incidence of a frequent complication denominated hemophagocytic lymphohistocytosis (HLH). We present the case of a 50-year-old patient with the above clinical spectrum who develops several serious complications during treatment.

Philippine Lime or Calamansi is considered one of the Philippine high-value crops in Nueva Ecija province. This article presents some issues and problems of the calamansi industry in terms of marketing. The study used a descriptive survey of 56 farm-owners or calamansi growers. Findings revealed that lime production could be a stable income source if the growers can provide the necessary production inputs on a sustainable basis. Calamansi farmers in the province some often confronted with the following problems: the high cost of farm inputs, price fluctuations, price manipulation of big-time traders, and other intermediaries. The study also found out that the existing actors in the chain were limited to growers, laborers, agri-supply shops, nursery owners, intermediaries, and traders. In terms of trading, there is a high degree of competition among traders in the market. The findings and results from this study may have important factors in developing and designing effective agricultural marketing program and strategic development plan by the authorities in the region.

Objective: To identify risk factors(RF) related to abnormal glucose regulation(AGR) 3 years postpartum according to 3-month-postpartum glucose status. Research design: Normoglycemic pregnant women of the St. Carlos Gestational Study included before gestational week 12, during 2015-2017. Of 3,036 eligible women, 2529 were followed-up until delivery: 1400 participated in postpartum follow-up. AGR defined as fasting serum glucose (FSG)>5.6 mmol/L and/or HbA1c >5.7% (39 mmol/mol) and/or 2h-SG ≥140/mg/dL after 75-g OGTT. 12-modifiable and 3-unmodifiable RF were analyzed for associations with glycemic changes. Reinforcement of Mediterranean Diet adherence was provided to all women at the postpartum visit by a dietitian Results: 137/1400(9.8%) women presented AGR 3 years postpartum, 27/137(19.7%) also had at 3 months, whereas 110/137(80.2%) had not. The remaining 1,263(90.2%) women were normoglycemic 3 years postpartum, 1180/1263(84.3%) were at 3 months, while 83/1263(6.08%) had AGR and became normoglycemic. Women with GDM were more likely to progress to AGR 3 years postpartum (OR:1.60[1.33-1.92]) and less likely to remain normoglycemic (OR:0.22[0.15-0.33]) versus non-GDM women. Having >2/3 unmodifiable RF was associated with a reduced rate of maintained normoglycemia (OR:0.56[0.39-0.80]) and an increased risk of progression to AGR (OR:1.90[1.28-2.83]). Having >5/12 modifiable RF was associated with a reduced rate of maintained normoglycemic (OR:0.74[0.51-0.99]) and reversion of AGR (OR:0.49[0.25-0.97]), an increased progression to AGR (OR:1.40[1.00-2.09]), and persistence of AGR (OR:2.57[1.05-6.31]). Pre-gestational BMI≥25kg/m2 (OR:1.80[1.19-2.71]), post-delivery weight gain (OR:2.22[1.10-4.48]), and waist circumference >89.5cm (OR:0.54[0.36-0.79]), (all p<0.05) were the main modifiable RF. Conclusions: RF related to an increased probability for 3-year-postpartum AGR despite 3-month normoglycemia were identified, potentially useful when designing personalized strategies for pregnant women, directed towards minimizing unfavorable outcomes.

We present an open-source Star Tracker (ST) for Attitude Determination. Our implementation makes use of open source software of common usage in astronomy running on a Raspberry Pi 2 platform. The developed platform is open and available for parties interested in further development. Evaluation of the system showed that the ST is suitable for Cubesats of 2U or larger. The ST platform is capable of solving the Lost-In-Space (LIS) problem. Currently, the average accuracy reached of the algorithm is close to 5 seconds of arc with an average processing time of 75 seconds. However, a average accuracy of about 3 minutes of arc can be reached with 35 seconds in average processing time. We also describe the evaluation procedure, the found conclusions of this procedure, in particular the section of the algorithm where most of the processing time is spent and other possible source of errors not included in this study.

Philippine Lime or Calamansi is considered one of the Philippine high-value crops in Nueva Ecija province. This article presents some issues and problems of the calamansi industry in terms of marketing. The study used a descriptive survey of 56 farm-owners or calamansi growers. Findings revealed that lime production could be a stable income source if the growers can provide the necessary production inputs on a sustainable basis. Calamansi farmers in the province some often confronted with the following problems: the high cost of farm inputs, price fluctuations, price manipulation of big-time traders, and other intermediaries. The study also found out that the existing actors in the chain were limited to growers, laborers, agri-supply shops, nursery owners, intermediaries, and traders. In terms of trading, there is a high degree of competition among traders in the market. The findings and results from this study may have important factors in developing and designing effective agricultural marketing program and startegic development plan by the authorities in the region.

This study develops a structure for mapping native vegetation in a transition area between Brazilian Cerrado and Atlantic Forest from integrated spatial information from the Sentinel-1 and Sentinel-2 satellites. Most studies use this data separately, however, the integrated use of optical sensors with Synthetic Aperture Radar (SAR) sensors can improve the methodology for classifying land use and land cover (LULC). The fusion of Sentinel-1 and Sentinel-2, for example, can increase the accuracy of mapping algorithms, using complementary information, such as spectral, backscattering, polarimetry, and interferometry. The study area comprises the Lobo Reservoir Hydrographic Basin, which is part of an environmental conservation unit protected by Brazilian law and with significant human development. LULC were classified, using the random forest deep learning algorithm. The classifying attributes were backscatter coefficients, polarimetric decomposition, and interferometric coherence for radar data (Sentinel-1), and optical spectral data, comprising bands in the red edge, near infrared, and shortwave infrared (Sentinel-2). The attributes were evaluated in three settings in which the SAR and optical data were evaluated separately (C1 and C2, respectively) and in an integrated manner (C3). The study found greater accuracy for C3 (96.54%), an improvement of nearly 2% compared to C2 (94.78%) and more than 40% in relation to C1 (55.73%). The classification algorithm encountered significant challenges in identifying wetlandsin C1, but performance improved in C3, enhancing differentiation by stratifying a greater number of classes during training and facilitating visual interpretation during sampling. Accordingly, the use of SAR and optical data becomes an alternative to optimize LULC mapping in tropical regions, due to the limited influence of atmosphere on images in the microwave range.

The repeated application of herbicides has led to the development of herbicide resistance. Models are useful for identifying key processes and understanding the evolution of resistance. This study developed a spatially explicit model at a landscape scale to examine the dynamics of Lolium rigidum populations in dryland cereal crops and the evolution of herbicide resistance under var-ious management strategies. Resistance evolved rapidly under repeated herbicide use, driven by weed fecundity and herbicide efficacy. Although fitness costs associated with resistant plants re-duced resistance evolution, they did not affect the speed of spread. The most effective strategies to slow resistance involved diversifying cropping sequences (e.g., crop rotation) and the herbicide applications (e.g., rotating different herbicide modes of action). Pollen flow was the main disper-sal vector, with seed dispersal also contributing significantly. Strategies limiting seed dispersal effectively decreased resistance spread. However, the use of a seed-catching device at harvest could unintentionally enrich resistance in the area. It would be beneficial to optimise the move-ment of harvesters between fields. The model presented here is a useful tool that may assist in the exploration of novel management strategies within the context of site-specific weed management at the landscape scale, as well as in the advancement of our understanding of resistance dynamics.

Vacuum pump wear is the most prevalent failure mode of the IBA Synthera® automated radiochemistry system. Rebuilding or replacing the pump causes equipment downtime and increases the radiation exposure of the service personnel. We built a dedicated test device to assess new or rebuilt pumps prior to installation, thus reducing downtime and radiation exposure during repairs. The Testbed incorporates a microprocessor that actuates the pump, valves, pressure sensor, and communicates with the user through lights, buttons, and an alphanumeric screen. The Testbed increases productivity and safety in the radiochemistry laboratory.

Confinement can induce substantial changes in the physical properties of macromolecules in suspension. Soft confinement is a particular class of restriction where the boundaries that constraint the particles in a region of the space are not well-defined. This scenario leads to a broader structural and dynamical behavior than the observed in systems enclosed between rigid walls. In this contribution, we study the ordering and diffusive properties of a two-dimensional colloidal model system subjected to a one-dimensional parabolic trap. Increasing the trap strength makes it possible to go through weak to strong confinement, allowing a dimensional transition from two- to one-dimension. The non-monotonic response of the static and dynamical properties to the gradual dimensionality change affects the system phase behavior. We find that the particle dynamics is connected with the structural transitions induced by the parabolic trap. In particular, at low and intermediate confinement regimes, complex structural and dynamical scenarios arise, where the softness of the external potential induces melting and freezing, resulting in faster and slower particle diffusion, respectively. Besides, at strong confinements, colloids move basically along one direction, and the whole system behaves structurally and dynamically similar to a one-dimensional colloidal system.

Natural products are considered an essential source of chemical compounds with relevant biological activities. Important antibiotics, anti-virals, and anticancer agents within healthcare facilities have been isolated from them. In recent decades, the study of alkaloids and the modulation of the immune response has aroused interest. The survey of SAR alkaloids with immunomodulatory effects is of great importance since structural modifications impact the effectiveness of the immunomodulatory activity, thus promoting the rational design of more effective and specific drugs. This review exhibits the main alkaloids with an immunomodulatory effect and their relationship with SAR studies, particularly in activating leukocytes and secretion of molecules with critical inflammatory activities such as cytokines, chemokines, and nitric oxide. These studies optimize the properties of alkaloids and allow a deeper understanding of the mechanisms of action at a molecular level, which is fundamental for the innovation of immunological therapies.

This study uses Landsat 8 and Digital Elevation Models (DEM) to show the dominant orientations of digital lineaments and morphotectonic features between measured trends and the tectonic evolution of the Upper Guajira, Colombia, in the northernmost region of the South American plate. Data from Landsat-8 and hillshaded images of three Digital Elevation Model (DEM) images with different resolutions (SRTM: 90m, ASTER-GDEM: 30m and Alos-Palsar: 12.5m), were used for the extraction and mapping of morpholineaments, drainage network and morphological features. Lineaments were analyzed by means of north azimuth frequency, length, density distributions, lithological distributions and geochronological periods. Tectonic control was supported by using the digitized geological map created by the Colombian Geological Service (SGC). Lineaments and faults were analyzed through the interpretation of a Riedel shear model as a result of the transtensional/transpressional tectonic arrangement of the Caribbean and South American plates. The directional trends of lineaments and faults indicate two dominant directions: NE-SW and E-W. The azimuth distribution analysis of measured structures and drainage channels show similar trends, except for some differences in the predominant directions of some drainage channels. The similarity in the orientation of lineaments, faults and drainage system highlights the degree of control exerted by underlying structures on the surface geomorphological features. Drainage channel classification illustrates the morphological and neo-tectonic complexity of the region. The extracted lineaments were divided into five geochronological groups based on the main ages of host rock formations according to the Colombian Geological Service (SGC) geological map. From the Cretaceous onward, the lineament azimuth frequency rotates from a NE-SW trend to a prominent E-W direction, which resembles the translation that Caribbean plate has been undergoing since the Cretaceous. Our results confirm that Remote Sensing techniques are reliable and useful to study the morphotectonic of an area and can be applied to zones of difficult access.

Abstract Introduction Minimally invasive approaches to oncological liver resection is common in many hepatobiliary centres. This study aims to compare the key oncological and survival outcomes of patients with colorectal liver metastases (CRLM) undergoing laparoscopic or open resections using propensity score matching (PSM). Methods A single-centre retrospective study was performed using a prospective database of patients undergoing liver resection for CRLM between January 2016 and December 2019. Different co-variates were selected for matching using PSM. Pre-matching and post-matching analyses were compared. Surgical and survival outcomes were analysed. Results In total, 303 patients who met the inclusion criteria were identified: 214 underwent open liver resection (OLR) and 91 laparoscopic liver resection (LLR). LLR had a significantly reduced length of intensive treatment unit (ITU) and overall in-patient stay but longer pringle and operative times. In the unmatched cohort, the median overall and disease-free survival time was significantly longer in patients undergoing laparoscopic compared with open surgery. A PSM model demonstrated significantly reduced blood loss and length of hospital stay, with a significantly greater Pringle and operative time in the LLR group. Differences seen in overall and disease-free survival were lost with propensity score matching, possibly due to lack of bi-lobar disease within the minimally invasive group. Conclusion In selected patients with CRLM, LLR presents similar survival and oncological outcomes with the advantages of the short-term results associated with the laparoscopic approach.

Focal adhesion kinase (FAK) and its close paralogue, proline-rich tyrosine kinase 2 (PYK2), are key regulators of aggressive spreading and metastasis of cancer cells. While targeted small-molecule inhibitors of FAK and PYK2 are showing promising antitumor activity, their clinical long-term efficacy may be undermined by the strong capacity of cancer cells to evade anti-kinase drugs. In healthy cells, the expression and/or function of FAK and PYK2 is tightly controlled through modulation of gene expression, competing alternatively spliced forms, non-coding RNAs, and proteins that directly or indirectly affect kinase activation or protein stability. The molecular factors involved are frequently deregulated in cancer cells. Here, we review the endogenous mechanisms controlling FAK and PYK2, and discuss how these mechanisms could inspire or improve anticancer therapies.

Leaf area estimation is a critical component in the study of plant growth and productivity within agricultural systems. This research introduces the LeafArea package, a specialized tool designed to calculate the leaf area of six distinct Andean fruit species: S. quitoense, S. betaceum, P. peruviana, R. fruticosus, P. ligularis and P. edulis. Leveraging response variables such as species type, leaf length and width, the package employs advanced machine learning algorithms to estimate leaf area accurately. The primary focus of the study is to identify the most effective model for describing the relationship between leaf width, length, and area for each plant species. Currently, the LeafArea package utilizes four different machine learning algorithms, namely generalized linear model (GLM), generalized linear mixed model (GLMM), Random Forest and XGBoost. Among these, XGBoost stands out as a top-performing algorithm, exhibiting exceptional predictive accuracy. The evaluation metrics employed in the program provide valuable insights for researchers, aiding in informed decision-making. Specifically, XGBoost demonstrates significantly lower prediction errors and approaches a near-perfect R2 value, emphasizing its potential to enhance predictive accuracy. These results underscore the efficacy of machine learning techniques, as a compelling choice for researchers seeking precise and robust predictions in leaf area estimation. The LeafArea package thus represents a valuable tool for advancing our understanding of plant growth dynamics, resource allocation, and overall productivity within agricultural ecosystems.

Colombia is the world's leading producer of mild washed arabica coffee and produces 12.6 million bags of green coffee, but at the same time 784,000 tons of waste biomass are dumped in open fields, of which only 5% is recovered or used. The objective of this project was to evaluate the production of platform chemicals from these coffee wastes. To achieve this, biomass characterization was carried out using proximate analysis, ultimate analysis and structural analysis. Hydrothermal valorization was carried out at a temperature range of 120-180 °C (LHW) and 180-260 °C (HTC) for one hour, the platform chemicals obtained were quantified by HPLC-IR, monitored by pH and conductivity, and the solid fraction was characterized by monitoring the functional groups in IR spectroscopy, and elemental analysis. Hydrolysis processes were obtained from 150 °C, production of platform chemicals from 180 °C and maximum concentration at 180 °C-4h, over 200 °C degradation of the products in the liquid fraction starts to take place. Homogeneous basic and acid catalysts were used to improve the yields of the reaction. The kinetics of the hydrolysis of lignocellulosic structures to sugars were also analyzed and described, and reaction orders of 1 (LHW), 3 (HTC) and their respective reaction rate equations were reported.

Fractal Geometric Pyramidal - Spiral- Hexagonal complexes ( GPS-H ) are the hereditary product of chaos and is its molecular solution.. Cancer is like a time machine to allowed us as pathologists to discover and document geometric structures that otherwise, we would not know existed. We have been documenting about cancer, geometric ordering complexes that are absolutely perfect made by an elastic geometry that we have called GPS-H complex: P for pyramid, S for spiral and H for hexagonal these structures have their genesis in the intercellular collisions of tumor cells or in extreme cellular damage by collision which generate DNA breakage. The DNA helices breaking generates the pyramidal and spiral component and in the same way, the amplification of the nitrogenous bases generates the hexagonal component. We are documenting, from different geology and biology scenarios, the existence of fractal invariant geometry of ancestral expansion, that generates order and connects these two systems as of the perspective of collision events at molecular , microscopic or macroscopic scales with the identification of geometric pattern that is modulated by the interaction between the electromagnetic field and material systems. The Geology and Biology converge into a single entity mediated by these geometric complexes to generate life platforms From collision and chaos events emerge at the interface of solid- liquids the GPS-H complexes that facilities water Fluid Interaction with basic geometries into a composite geometry leading in all systems and scales to deformation of the solid states . The deformed solid structures, in turn, acts as a moving wall boundary for the fluid and changes the water flow field in this way the balance and order of the system is restored. GPS-H are the hereditary product of chaos and its molecular solution. Based on the data obtained and analyzed, we verified that these GPS-H complexes are not native to the earth, representing a metastatic seeding that originally comes from the outer space and probably was incorporated into the ancestral DNA of the first multicellular organisms in the interphase of geology collsion events so we can trace it to the first multicellular organisms of the edicarian biota As ancient geometry, the pyramids of Egypt represent the most enigmatic and majestic structures built on earth but until know, it is unknown how they built, it us an unresolved mystery. Like enigmatic are the patterns in biology documented and published about cancer and represented by these fractal GPS-H complexes which have a unique particularity, remain invariable, they do not change from a microscopic to a macroscopic or megascopic scale and even over time they remain unchanged, as here it is documented. They have the quantum property of multiples expansions; thus, it is possible to trace them over time and in different dimensional scales. Based on the properties of this unique complex, it is possible to identify an active morphologic fractal connection between the microscopical level of pyramidal complexes seen in cancer and the megastructures of Egypt pyramids by clearly documenting complexes GPS-H from an ancestral universal geometry in these two different pictures The complexes GPS-H are part of a universal functional quantum geometry that generates a precursor order of life platforms They are the replaceable mobile pieces of a geological- biological puzzle that is assembled in time collectively and spatially to give rise to the multicellular platform that generates life on our planet, which shows an existing evident connection between these geometric complexes that jumps systems and dimensions to transfer and encode information between them. Bioengineering and manipulation of these ancestral GPS-H complexes can be used in alternative therapies in cancer , regenerative and rejuvenation medicine.

Since the 1960s, forest planners have used linear programming models to develop management plans for large, forested areas. Hundreds of academic papers have presented such models, incorporating multiple objectives, a growing diversity of management interventions, and uncertainty, among other things. Three basic ways to formulate these models have been used: Model I, III, and III. We define these models based on the sequence of management unit states represented by the variables. In Model I, variables represent a sequence of states from the beginning of the planning horizon to the end. In Model II, variables represent a sequence of states from one intervention to the next. Finally, in Model III, variables represent a single arc in a management unit’s decision tree, including only a beginning and an ending state. We formulate each type of model for a case study with three increasingly complex scenarios incorporating additional ecosystem services. Our results indicate that, despite requiring more variables and constraints, Model III requires the least time to formulate, largely because it has the least dense parameter matrix. Model II has the shortest solution times, with Model III close behind. Model I requires both the longest formulation and solution times.

Introduction: Bovine tuberculosis is a zoonotic disease of considerable impact, especially in livestock countries, which can cause human disease. Despite its importance, Colombia is a country in which few studies analyse its behaviour, and none develop maps using geographic information systems to characterise it. Objective: To describe the temporal-spatial distribution of bovine tuberculosis in Colombia between 2001 and 2019. Methods: Retrospective cross-sectional descriptive study, based on reports by the Colombian Agricultural Institute, of tuberculosis surveillance in cattle on farms in Colombia from 2001 to 2019. The data were converted into databases in Microsoft Access 365®, and multiple epidemiological maps were generated with the Kosmo RC1®3.0 software coupled to shape files of all the country's departments. Results: During the study period, 5,273 tuberculosis cases in bovines were identified in the different departments of Colombia (mean 278 cases/year). Regarding its temporal distribution, the number of cases varied from a maximum of 903 cases (17.12% of the total) in 2015 to a minimum of 0 between 2001 and 2004 and between 2017 and 2019 (between 2005 and 2016, the minimum was 46 cases, 0.87%). Conclusions: GIS is an essential tool for understanding the temporospatial behaviour of zoonotic diseases in Colombia, as is the case of bovine tuberculosis, with its potential implications for Human and One Health.

In polymer-based dental composites, wear is a three-body wear system mainly abrasive, because of the food particles and wear products suspended in the oral cavity, which are transferred to the microcavities of the surface of the replacements. Due to this fact, the incorporation of nanodiamond as reinforcement in these polymer matrix composites, which promotes the creation of a solid lubricant tribofilm surface could be advantageous. When nanodiamond is added in contents of 0.8, 1.6 and 3.2 wt %, an increase in microhardness from 95 up to 420 %, compared to the one of neat BisGMA/TEGDMA, is observed. Additionally, the incorporation of a content of 1.6 wt % is enough to cause a diminution of ~78 % in the friction coefficient and a reduction of the specific wear rate and Archard’s coefficient of ~50 %. Nevertheless, the addition of relatively high contents reduces the effectiveness of photoinitiation and UV-curing, which is related to the scattering and absorption of UV radiation by ND.

Solid polymer electrolytes and composite polymer electrolytes serve as crucial components in all-solid-state energy storage devices. Structural batteries and supercapacitors present a promising alternative for electric vehicles, integrating structural functionality with energy storage capability. However, despite their potential, these applications are hampered by various challenges, particularly in the realm of developing new solid polymer electrolytes that require more investigations. In this study, novel solid polymer electrolytes and composite polymer electrolytes were synthesized using epoxy resin blends, ionic liquid, lithium salt, and alumina nanoparticles, and subsequently characterized. Among the formulations tested, the optimal system, designated as L70P30ILE40Li1MAl2 and containing 40 wt.% of ionic liquid and 5.7 wt.% of lithium salt, exhibited exceptional mechanical properties. It displayed a remarkable storage modulus of 1.2 GPa and reached ionic conductivities of 0.085 mS/cm at 60°C. Furthermore, a proof-of-concept supercapacitor was fabricated, demonstrating the practical application of the developed electrolyte system.

The aim of this work was to classify the business incubators in Spain according to the four phases of the startup’s incubation process. Considering that the graduation rate implies greater survival and business success of the incubated companies, they have been identified at each stage of the incubation (spread of entrepreneurship, pre-incubation, advanced incubation, and graduation). The activities that present higher impacts on the success of the incubated companies and the activities carried out by the business incubator that have a greater relevance on the graduation of the companies have concretely been considered. Principal component (PC) cluster analysis has been applied. All the incubation variables were used simultaneously, reducing their number, and grouping them into factors. Finally, the cases were grouped according to these latent variables. Principal components analysis reduced dimensionality to 8 factors with a 74 % of explained variance. Factor 1 was positively related to pre-incubation variables, factor 2 was linked to training and collaboration variables within the entrepreneurship diffusion phase. Factor 3, named activity monitoring and control, was related to phase 3 or basic incubation variables. Cluster analysis facilitates the grouping of business incubators into three clusters: Group 1 (16 % of the total), incubators with strong deficits in incubation phases 1, 2 and 3. They are small sized business incubators, often located in rural areas or cities and low graduation rate. Group 2 (30 %), business incubators with very high graduation rate, and strongly positive values in factors 1 and 2. Factor 3, although positive, it is susceptible to improvement. They are the largest group of business incubators and usually located in industrial and technological parks. Group 3 (54 %) is the majority, with values close to cluster 2 and 3.

The aim of this work was to classify the business incubators in Spain according to the four phases of startups incubation. Taking into account that the graduation rate implies greater survival and business success of the incubated companies, they have been identified at each stage of the incubation (spread of entrepreneurship, pre-incubation, advanced incubation, and graduation). The activities that present higher impacts on the success of the incubated companies and the activities carried out by the incubator that have a greater relevance on the graduation of the companies have concretely been considered. Principal component (PC) cluster analysis have been applied. All the incubation variables were used simultaneously, reducing their number, and grouping them into factors, finally the cases were grouped according to these latent variables. Principal components analysis reduced dimensionality to 8 factors with a 74 % of explained variance. Factor 1 was positively related to pre-incubation variables, factor 2 was linked to training and collaboration variables within the entrepreneurship diffusion phase. Factor 3 called activity monitoring and control and was related to phase 3 or basic incubation variables. Clusters analysis facilitates the grouping of incubators into three clusters: Group 1 (16 % of the total), incubators with strong deficits in incubation phases 1, 2 and 3. They are small Business Incubators, often located in rural areas or cities and low graduation rate. Group 2 (30 %), business incubators with very high graduation rate, and strongly positive values in factor 1 and 2. Factor 3 although positive is susceptible to improvement. They are the largest incubators and usually located in industrial and technological parks. Group 3 (54 %) is the majority, with values close to cluster 2 and 3.

Waste heat dissipated in the exhaust system in a combustion engine represents a major source of energy to be recovered and converted into useful work. A waste heat recovery system (WHRS) based on an Organic Rankine Cycle (ORC) is a promising approach, and has gained interest in the last few years in an automotive industry interested in reducing fuel consumption and exhaust emissions. Understanding the thermodynamic response of the boiler employed in an ORC plays an important role in steam cycle performance prediction and control system design. The aim of this study is therefore to present a methodology to study these devices by means of pattern recognition with infrared thermography. In addition, the experimental test bench and its operating conditions are described. The methodology proposed identifies the wall coordinates, traces paths, and tracks wall temperature along them in a way that can be exported for subsequent post-processing and analysis. As for the results, through the wall temperature paths on both sides (exhaust gas and working fluid) it was possible to quantitatively estimate the temperature evolution along the boiler and, in particular, the beginning and end of evaporation.

This study presents a new kinetic scheme for the mass yield prediction of waste lignocellulosic biomasses treated by Hydrothermal Carbonization (HTC). The proposed reactions are based on the decomposition, solubilization, and polymerization of each main fraction of the biomass: cellulose, hemicellulose, and lignin. The ash content was assumed to be inert. The kinetic parameters have been obtained by non-linear adjustment using a data set with 220 experimental runs collected from the literature. The results indicate that the pre-exponential factors range was from 7.33 x10¹ to 1.412x10⁵ min^-1, and activation energies were between 33.75 y 225.3 kJ/mol. A good fit is achieved between the observed and predicted data with an R² of 0.81 and an RMSE of 7.7 %. The proposed scheme was validated with the experimental data obtained by the HTC of sawdust (Pinus radiata) and rapeseed (Brassica napus). The experiments were carried out at temperatures of 190, 220, and 250 ºC and reaction times of 0, 30, 60, 90, and 120 min. The predicted values showed an average error of 2.3 and 3.5 %, respectively. Therefore, the kinetic scheme is a useful tool in the conversion analysis of waste biomass treated by HTC.

There is a disproportionate increase in the incidence of diet-related cardiometabolic disorders in racial and ethnic minority groups. This systematic review examines the extent to which diet-induced changes in health outcomes have been discussed by race or ethnicity in randomized controlled trials recruiting both minority and non-Hispanic White groups. Databases i.e. PubMed, Cochrane library and Web of Science were searched up to November 2019. Studies that discussed effects of defined dietary interventions on health outcomes by racial or ethnic minority group vs. non-Hispanic Whites (n=29) were included in the review. Most studies were conducted in Black vs. White people testing effects of energy restriction, macronutrient modification, sodium reduction, or variations of the Dietary Approaches to Stop Hypertension (DASH) diet on cardiometabolic outcomes. There was limited focus on other minority groups. Evidence suggests greater blood pressure reduction for Black people compared to Whites particularly on DASH (or similar) diets. Overall, there was limited consideration for group-specific eating patterns and diet acceptability in most studies. Adequately powered studies are needed for accurate interpretation of race by diet effects. With emerging precision nutrition initiatives, it is imperative to ensure adequate representation of racial and ethnic subgroups for addressing nutrition-related health disparities.

: A strong financialtransaction is an important factor in organizational triumph and sustainability, and it is elucidated in the revised student handbook of the University that can be found on page 96 rules 1 to 5. This study assessed the registered students organizations' profile in terms of its type, registration, years of establishment, functions, and designations of student leaders and advisers. The financial practices or internal control system manages their organizational finances and the problems encountered by the student organizations and eventually proposed a manual of operation for students and youth organization's internal control system. This research used the descriptive design with the aid of questionnaire; data gathering through quota sampling from 57 student leaders and advisers of different student organizations of NEUST. Findings showed that most organizations had their constitution and by-laws but kept only as files and renewal requirements. Some provisions were not known to the officers, mostly were registered more than five years in operation; however, in terms of functions of officers and advisers, the results showed that some functions were not done by the officers who supposed to do it like the auditors who serve as treasurers also, the PRO as the record keeper and the presidents who handled finances and collections and as well as disbursements of funds. Generally, the organizations' financial activities were deemed to be "good", especially budgeting and cash receipt, due to the implementation of "no collection and no tuition fee policy". The researchers concluded that the absence of the proper internal control systems and manual of operation and lack of proper transfer of financial records from the previous sets of officers were the serious problems that should be addressed. Moreover, the student organizations' internal control system could still be improved if there is proper training and supervision in accounting operation.

Despite chronic fibrosis and associated excess extracellular matrix (ECM) deposition and crosslinking occurring in many pathological conditions, few in vitro studies examine how fibrosis-induced ECM stiffening impacts lymphatic endothelial cells (LEC) behavior and subsequent new lymphatic vessel growth and function. This study examined the stiffening profile of PhotoCol®—commercially available methacrylated type I collagen—photo-crosslinked with photoinitiators Lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP), Irgacure 2959 (IRG), and Ruthenium/Sodium Persulfate (Ru/SPS) prior to evaluating PhotoCol® permeability and LEC response to PhotoCol® at low and high stiffness levels representing normal and fibrotic ECM stiffness. Ru/SPS produced the highest maximum stiffness for photo-crosslinked PhotoCol® hydrogels. While Ru/SPS stiffness values did not differ significantly with increased light exposure, permeability decreased significantly with increasing light exposure for 40 kDa dextran. Finally, LECs on softer PhotoCol® appeared smaller with less prominent VE-Cadherin (cell-cell junction) and F-actin expression compared to cells on stiffer PhotoCol®. Overall, PhotoCol® with Ru/SPS photoinitiator provides the fibrillar microstructure and dynamic stiffness range that enables systematic study of LEC stiffness responses relevant to the stiffened ECM observed in pathologies with significant fibrotic activity. Therefore, this study demonstrates the utility of PhotoCol® with Ru/SPS for disease modeling applications, particularly modeling lymphatic vascular growth and function during fibrosis.

Clinical and analytical differences between adult patients monoinfected with Borrelia burgdorferi sensu lato (s.l.) and patients infected with B. burgdorferi s.l. who also had IgG antibodies against Babesia divergens have not been reported so far. Both Lyme disease caused by B. burgdorferi and babesiosis caused by B. divergens, endemic in Asturias, Northwestern Spain, are transmitted by Ixodes tick bites. Clinical, laboratory and other diagnostic tests characteristics (imaging, electro-cardiographic-ECG) of 120 residents of Asturias with confirmed B. burgdorferi s.l. infection, di-agnosed during 2015-2017, of whom 47 (39.2%) had B. divergens IgG antibodies, were retrospec-tively compared. Cardiorespiratory symptoms were reported in 9/47 (19.2%) patients with Lyme disease and B. divergens IgG antibodies compared to 4/73 (5.5%) patients with B. burgdorferi s.l. monoinfection (P=0.02). Dyspnea was recorded in 4/47 (8.5%) patients with Lyme disease and B. divergens IgG antibodies compared to 1/73 (1.4%) monoinfected (P=0.07). In addition ECG atri-oventricular (AV) block, mostly 1st degree, was detected in 5/47 (15.6%) patients with Lyme dis-ease and B. divergens IgG antibodies compared to 1/73 (2.6%) B. burgdorferi s.l. monoinfected (P=0.09). No other clinical, laboratory or other tests differences were observed between B. burgdorferi and B. divergens IgG antibodies carriers and B. burgdorferi monoinfected. We con-cluded that patients with Lyme disease and B. divergens IgG antibodies had more frequent car-diorespiratory symptoms, mainly dyspnea, compared to B. burgdorferi monoinfected patients. These symptoms were unrelated to anemia. ECG AV block, perhaps induced by summative myo-cardial damage due to either infections or B. divergens induced lung microcirculation slow-ing-down, might play a role in the cardiorespiratory dysfunction.

This study is dedicated to understanding and simulating the mechanical properties of concrete, with a specific focus on the mesoscopic scale. Investigating concrete at this level involves examining its composition as a heterogeneous amalgamation comprising mortar, aggregates, and the interfacial transition zone (ITZ). Such an approach provides a detailed examination of the material's behavior and attributes. Numerical models are utilized, leveraging the finite element method (FEM), to examine the behavior of concrete. The study employs MATLAB programming to develop three-dimensional models, subsequently subjected to FEM analysis. Various mesoscopic Representative Volume Elements (RVEs) are formulated, encompassing varied shapes and dimensions. The MATLAB framework generates input files for numerical FEM simulations, replicating compression strength tests. As complexity increases with the inclusion of the ITZ, prismatic RVEs are developed. The proposed mesoscopic model establishes a foundational framework for a numerical simulation methodology tailored to laboratory compression tests. It provides detailed insights into concrete behavior, elucidating deformation, and fracture mechanisms. Although not a complete substitute for experimental methods, these models offer a cost-effective and expeditious alternative, pinpointing vulnerable areas and exploring the implications of additional materials on concrete behavior. Experimental data and virtual tests pave the way for mitigating carbon footprint and improving concrete sustainability.

Over the years, researchers have been studying the effect of weather and context data on the transport mode choice. The majority of these works are based on survey data, however the accuracy of their findings relies on how respondents give accurate and honest answers. In this paper, the potential of using GPS trajectories as an alternative to travel surveys in studying the impact of weather and context data on transport mode choices is investigated in Beijing city. In the analysis, we apply both descriptive and statistical models such as the MNL and MNP models. Our findings indicate that temperature has the most prominent effect among weather conditions. For instance, for temperatures greater than 25 °C, the walking share increases by 27% and the bike share reduces by 21%, which is line with the results from several survey studies. In addition, the evidence of government policy on transport regulation is revealed when the air quality becomes hazardous as people are encouraged to use environmentally friendly travel mode choices such as the bike instead of the bus and car, which are known CO2 emitters. Moreover, due to a series of traffic restrictions introduced by the Beijing government during the 2008 summer Olympics, a decrease of 17.5% in the car share and an increase of 13% and 10% in the walking and bus shares, respectively are observed. These findings provide a scientific basis for effective transport regulation and planning purposes.

Cancer is a disease that encompasses multiple and different malignant conditions and is among the leading causes of death in the world. Therefore, the search for new pharmacotherapeutic options and potential candidates that can be used as treatments or adjuvants to control this disease is urgent. Natural products, especially those obtained from plants, have played an important role as a source of specialized metabolites with recognized pharmacological properties against cancer, therefore, they are an excellent alternative to be used. The objective of this research was to evaluate the action of the monoterpene isoespintanol (ISO) against the human tumor cell lines MDA-MB-231, A549, DU145, A2780, A2780-cis and the non-tumor line MRC-5. Experiments with MTT and fluorescence with propidium iodide (PI), DAPI and green plasma revealed the cytotoxicity of ISO against these cells; furthermore, morphological and chromogenic studies revealed the action of ISO on cell morphology and the inhibitory capacity on reproductive viability to form colonies in MDA-MB-231 cells. Likewise, 3D experiments validated the damage in these cells caused by this monoterpene. These results serve as a basis for progress in studies of the mechanisms of action of these compounds and the development of derivatives or synthetic analogues with a better antitumor profile.

This study examined the economics of Philippine Lime or Calamansi production in selected Cities and Municipalities in Nueva Ecija, Philippines. The study was conducted within the rural farming households' framework, which constitutes the Philippine agricultural sector's backbone, producing about 5.8 percent of the total national agricultural output with the Central Luzon area, including the portion of the locale of the study. Using quota sampling, data collected from 50 selected calamansi grower- farmers from top 5 producing area in Nueva Ecija, the study measured the profitability of and the production efficiency of calamansi production in the area. Using a formal interview schedule, primary data was obtained from the sampled farming households. The study revealed that the typical calamansi farmer in the area as reflected in the instrument, thirty-two (32) or 64% which covers the majority of the respondents claimed that they fully owned the land they cultivated. Calamansi yield depends on its age as well. Fertilizer was found to harm output. Majority of them shared the same production and post–production practices, though a slight difference in terms of labor cost was observed. There were some who were already in the industry for quite a long time and learned other farming techniques and practices different from the conventional and were proven effective. For better efficiency, the land area cultivated, the farmers' educational status, accessibility to credit facility, and development of the rural areas and farmers' contact with the extension agents are some of the key issues to address. The local government in cities and municipalities may engage in an intensive campaign in encouraging capitalists to form cooperatives, processing and manufacturing houses to produce calamansi juice and other valuable products out of the calamansi fruit.

Background: Although confirmed cases of infection with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) have been declining since late 2020 due to general vaccination, little research has been done regarding the impact of vaccines against SARS-CoV-2 in Spain in terms of hospitalizations and deaths. Objective: Our aim was to identify the reduction in severity and mortality of coronavirus disease 2019 (COVID-19) at a nationwide level due to vaccination. Methods: We designed a retrospective, population-based study to define waves of infection and to describe the characteristics of the hospitalized population. We also studied the rollout of vaccination and its relationship with the decline in hospitalizations and deaths. Finally, we developed two mathematical models to estimate non-vaccination scenarios using machine learning modeling (with the ElasticNet and RandomForest algorithms). The vaccination and non-vaccination scenarios were eventually compared to estimate the number of averted hospitalizations and deaths. Results: In total, 498,789 patients were included, with a global mortality of 14.3%. We identified six waves or epidemic outbreaks during the observed period. We established a strong relationship between the beginning of vaccination and the decline in both hospitalizations and deaths due to COVID-19 in all age groups. We also estimated that vaccination prevented 170,959 hospitalizations (CI 95% 77,844–264,075) and 24,546 deaths (CI 95% 2,548–46,543) in Spain between March 2021 and December 2021. We estimated a global reduction of 9.19% in total deaths during the first year of COVID-19 vaccination. Conclusions: Demographic and clinical profiles changed over the first months of the pandemic. Patients over 80 years old and other age groups obtained clinical benefit from early vaccination. The severity of COVID-19, in terms of hospitalizations and deaths, decreased due to vaccination.

This work presents a novel compact CMOS potentiostat designed circuit for electrochemical cell. The proposed topology functions as a circuit interface, controlling the polarization of voltage signals at the sensor electrodes and facilitating current measurement during the oxidation-reduction process of a analyzed solution. The potentiostat, designed for CMOS technology, comprises a two-stage amplifier, two current mirror blocks coupled to this amplifier, and a CMOS push-pull output stage. It employs the electrochemical method of cyclic voltammetry, operating within voltage range of ±0.8 V and scan rates of 10mV/s, 25mV/s, 100mV/s and 250 mV/s. The circuit is capable of reading currents ranging from 10 µA to 500 µA. Experimental results were obtained using a potassium ferrocyanide (K3(FeCN)6) redox solution with concentrations of 10, 15 and 20 mmol/L, and their corresponding voltammograms were evaluated. The experimental results from a discrete circuit demonstrate that the proposed potentiostat topology produces outcomes consistent with those of classical topologies presented in the literature and industrial equipment.

Streptococcus pneumoniae is an pathogenic and opportunistic Gram-positive bacteria that is the leading cause of community acquired respiratory diseases, varying from mild- to deathly- infections. Appearance of antibiotic resistant isolates has prompted the search for novel targets. One of the most promising approaches is the structure-based knowledge of possible targets in conjunction to rational design and docking of inhibitors of the chosen targets. A useful technique to help solving protein structures is to label them with a heavy atom, like selenium, that facilitates tracing of the some of the amino acid residues. We have chosen two pneumococcal DNA-binding proteins, namely the relaxase domain of MobM protein from plasmid pMV158, and the RelB-RelE antitoxin-toxin protein complex. Through the update of a previous protocol [1] that uses seleno-L-methionine, we could achieve 100% labelling of the proteins. Furthermore, the labelled proteins retained full activity as judged from relaxation of supercoiled plasmid DNA and from gel-retardation assays.

In the clinical electrophysiologic practice, the reading and comparing electroencephalographic (EEG) recordings some times is insufficient and take to much time. That is why in the last years it has begun to introduce new methods of EEG analysis, that give a better and faster understanding of the EEG dynamics and allow a rapid intervention in the patient's treatment. Tools coming from the information theory or nonlinear system as an entropy and complexity have been shown to be a very good alternative to address this problem. In this work we introduce a novel method -the permutation Lempel-ziv complexity vs permutation entropy map. This method was applied to EEG of two patients with specific diagnosed pathologies during respective follow up processes of pharmacological changes in order to detect changes that are not evident with the usual inspection method. Our results show that the proposed method are useful for observing an evolutionary retrospective clinical effects of pharmacological interventions in both patients, and from these, to follow the clinical response to the proposed treatment.

Efforts to optimize the design and enhance the efficiency of standing-wave thermoacoustic refrigerators (SWTAR), particularly those with parallel plate stacks, are crucial for achieving rapid and straightforward engineering estimates. This study primarily focuses on optimizing the Coefficient of Performance (COP) by combining the linear thermoacoustic theory (LTT) with the Design of Experiments (DOE) approach. The investigation centers around five key parameters affecting the COP, once the working gas is selected. Then, based on the LLT theory, the COP was estimated numerically, over defined intervals of those five parameters. Moreover, through quantitative and qualitative effect analyses, these five parameters and their interactions are determined. Utilizing a transfer function and surface response analyses based on the COP, the study aims to delineate the best COP value as well as the contribution of the thermoacoustic parameters and their interactions. Furthermore, a comparison between contour and surface responses and several statistical decision approaches applying the Full Factorial Design verify the robustness of the study’s findings. Ultimately, the COP results obtained align with existing literature, underscoring the validity and relevance of the study’s methodologies and conclusions.

In an era characterized by rapid technological advancements, economic fluctuations, and global competition, adaptability and resilience have become critical success factors for businesses navigating uncertainty and complexity. This article explores the role of enterprise agility in today’s business landscape at Latam branch of Tata Consultancy Services (TCS), where organizations face complex and diverse operations. We aim to examine how companies can become more agile in the face of emerging challenges and seize opportunities swiftly to drive growth and deliver value. Since 2014, the division has embarked on an agile transformation journey to drive growth, deliver value, foster innovation, and build resilience in an increasingly dynamic environment. We scrutinize an approach to measuring and enhancing enterprise agility, employing statistical analysis and continuous improvement methodologies to tackle real-world challenges while offering valuable insights and recommendations for organizations aiming to implement similar systems. The results of an agile transformation in a certain company’s Latam branch serve as a compelling case study, demonstrating how the implementation of targeted measures and continuous improvement can significantly bolster enterprise agility. Methodologically, our work applies a novel sequence of parametric statistical tests which, to the best of our knowledge, have not been used in the industry to validate the results of business agility metrics. In future work, we aim to create a new workflow considering non-parametric tests to address data with other statistical distributions. We conclude our work by proposing a sequence of steps for organizations to implement business agility metrics.

We investigate the behavior of the solutions of the ray equation in isotropic media. We discuss local and global transversals and wavefronts and give examples of rays without wavefronts.

This paper presents a novel approach for indoor acoustic source localization using microphone arrays and based on a Convolutional Neural Network (CNN). The proposed solution is, to the best of our knowledge, the first published work in which the CNN is designed to directly estimate the three dimensional position of an acoustic source, using the raw audio signal as the input information avoiding the use of hand crafted audio features. Given the limited amount of available localization data, we propose in this paper a training strategy based on two steps. We first train our network using semi-synthetic data, generated from close talk speech recordings, and where we simulate the time delays and distortion suffered in the signal that propagates from the source to the array of microphones. We then fine tune this network using a small amount of real data. Our experimental results show that this strategy is able to produce networks that significantly improve existing localization methods based on SRP-PHAT strategies. In addition, our experiments show that our CNN method exhibits better resistance against varying gender of the speaker and different window sizes compared with the other methods.

A multilevel factorial design of 23 with 12 experiments was developed for the preparation of cellulose nanocrystals (CNC) from Agave tequilana Weber var. Azul bagasse. The studied parameters were acid type (H2SO4 and HCl), acid concentration (60 and 65 wt% for H2SO4, 2 and 8N for HCl) temperature (40 and 60°C for H2SO4, 50 and 90°C for HCl), and hydrolysis time (40, 55 and 70 min for H2SO4, 30, 115 and 200 min for HCl). The obtained CNC were physical and chemically characterized using dynamic light scattering (DLS), atomic force microscopy (AFM), Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XDR) techniques. The size and morphology of A. tequilana CNC strongly depend on the acid type and hydrolysis parameters. The shortest CNC were obtained with H2SO4 (65 wt%, 40 °C, and 70 min) had a length of 137 ± 68 nm, width 33 ± 7 nm, and height 9.1 nm, whereas the shortest CNC obtained with HCl (2 N, 50 °C and 30 min) had a length of 216 ± 73 nm, width 69 ± 17 nm, and height 8.9 nm. CNC prepared from H2SO4 resulted shorter and thinner than those obtained with HCl. The total sulfate groups content in CNC obtained with H2SO4 increase with time agree to CSG=aebt, and increases with temperature and acid concentration.

The quest for youthful, healthy skin and full, vibrant hair has long been a driving force in the dermocosmetics field. However, traditional approaches often struggle to address the underlying causes of aging, damage, and hair loss. Regenerative cosmetics, powered by skin tissue engineering, offer a transformative alternative. This review explores the emerging field of using engineered skin tissues for cosmetic purposes, focusing specifically on their potential for anti-aging, repair, and hair restoration applications. We discuss how these technologies aim to rejuvenate aging skin by promoting collagen production, reducing wrinkles, and improving overall skin function. Additionally, the use of engineered skin for wound healing and scar reduction is examined, highlighting their potential to improve the appearance and functionality of damaged skin. Finally, we advance the exciting prospects of utilizing skin tissue engineering techniques to regenerate hair follicles, potentially offering solutions for hair loss and promoting denser hair growth.

RNA silencing serves key roles in a multitude of cellular processes, including development, stress responses, metabolism, and maintenance of genome integrity. Dicer, Argonaute (AGO), double-stranded RNA binding (DRB), RNA-dependent RNA polymerase (RDR) and DNA-dependent RNA polymerases known as Pol IV and Pol V form core components to trigger RNA silencing. Common bean (Phaseolus vulgaris) is an important staple crop worldwide. In this study, we aimed to unravel the components of the RNA-guided silencing pathway in this non-model plant taking advantage of the availability of two genome assemblies of Andean and Meso-American origin. We identified six PvDCLs, thirteen PvAGOs, 10 PvDRB, 5 PvRDR, in both genotypes, suggesting no recent gene amplification or deletion after the gene pool separation. In addition, we identified one PvNRPD1 and one PvNRPE1 encoding the largest subunits of Pol IV and Pol V, respectively. These genes were categorized into subgroups based on phylogenetic analyses. Comprehensive analyses of gene structure, genomic localization and similarity among these genes were performed. Their expression patterns were investigated by means of expression models in different organs using online data and quantitative RT-PCR after pathogen infection. Several of the candidate genes were up-regulated after infection with the fungus Colletotrichum lindemuthianum.

The current research investigated the environmental risk of the polycyclic musk compounds, Galaxolide® (HHCB) and Tonalide® (AHTN), in the marine environments. These substances are lipophilic, bioaccumulated and potentially biomagnified in aquatic organisms. To understand the toxicity of HHCB and AHTN, we performed acute toxicity tests by exposing marine microalgae (Phaeodactylum tricornutum, Tretraselmis chuii and Isochrysis galbana), crustaceans (Artemia franciscana), echinoderms (Paracentrotus lividus), bivalves (Mytilus galloprovincialis), fish (Sparus aurata) and a candidate freshwater microalga (Raphidocelis subcapitata) to environmentally relevant concentrations (0.005 - 5 µg/L) following standardized protocols. The effects of both substances on microalgae growth were incipient and only I. galbana was sensitive to HHCB and AHTN, with IC10 values of 5.22 µg/L and 0.328 µg/L, respectively. Significant (p < 0.01) concentration dependent responses were measured in P. lividus and M. galloprovincialis larvae developments as well as S. aurata mortality tested with HHCB. The effect of HHCB on P. lividus larvae development was the most sensitive endpoint recorded, producing an EC50 value of 4.07 µg/L. Our results show that HHCB represents a high risk to P. lividus larvae development for early life stages in marine environments.

Glucose is the primary energy fuel used by the brain and is transported across the blood-brain barrier (BBB) by the glucose transporter type 1 and 2.[1] A GLUT1 genetic defect is responsible for glucose transporter type 1 deficiency syndrome (GLUT1DS). Patients with GLUT1DS may present with pharmaco-resistant epilepsy, developmental delay, microcephaly, and/or abnormal movements, with tremendous phenotypic variability. Diagnosis is made by the presence of specific clinical features, hypoglycorrhachia and an SLC2A1 gene mutation. Treatment with a ketogenic diet therapy (KDT) is the standard of care as it results in production of ketone bodies which can readily cross the BBB and provide an alternate energy source to the brain in the absence of glucose. KDTs have been shown to reduce seizures and abnormal movements in children diagnosed with GLUT1DS. However, little is known about the impact of KDT on cognitive function, seizures and movement disorders in adults newly diagnosed with GLUT1DS and started on a KDT in adulthood, or the appropriate ketogenic diet therapy to administer. This case report demonstrates the potential benefits of using a modified Atkins diet (MAD), a less restrictive ketogenic diet therapy on cognition, seizure control and motor function in an adult with newly-diagnosed GLUT1SD.

Experimental and epidemiological evidence has shown that modifications of the intrauterine environment can have deleterious consequences for individuals, expressed as an increased risk of suffering non-communicable pathologies in adult life, which is known as the hypothesis of the early origin of diseases or programming fetal. On the other hand, changes in gene expression patterns through epigenetic modifications can be the basis for long-term maintenance of the effects of fetal programming. In this sense, epigenetics comprises the study of intrauterine disturbances, which develop diseases in the adult, including Celiac Disease (CD). In addition, early feeding practices could influence the risk of CD development, such as breastfeeding timing and duration and age at gluten introduction in the diet. Gluten acts as a trigger for CD in genetically predisposed subjects, although approximately 30% of the world population has HLA DQ2 or DQ8, the prevalence of the disease is only 1-3%. It is not known what factors act to modify the risk of disease in genetically at risk subjects. Taking into account all these considerations, the aim of the current review is to elucidate the role of early programming and the effect of early nutrition on the development and progression of CD.

Objective. To test the hypothesis that a session of unilateral tSMS over the dominant primary motor cortex (M1) in healthy subjects produces a transient decrease in manual dexterity. Methods. A triple-blinded randomized control trial was conducted in 40 healthy participants who were allocated to real- or sham-tSMS group. Each participant underwent one session of tSMS and were assessed before, immediately after, 15 minutes, and 40 minutes after stimulation. Outcome measures were Finger Tapping Test (FTT), 5-seconds FTT, nine Hole Peg Test, and the hand grip assessment. Results: Significant differences were found between groups 15 minutes after stimulation in favor of the tSMS group in the FTT (2.2 ± 0.99; CI= .18-4.22; d= .84p=.034), and 5-second FTT (4.2 ± 1.98; CI= .199-8.2, d= .68; p=.04). In the intragroup analysis, a significantly lower number of taps 15 minutes after stimulation was observed in sham group (3.3 ± 1.01; CI= .47-6.13; d= .42; p=.015), but not in the real stimulation group. Conclusion: A unilateral session of tSMS in the M1 of the dominant hemisphere of healthy individuals does not reduce manual dexterity or grip strength. This technique could have benefits on the motor performance of the arm contralateral to the stimulated motor cortex

UML (Unified Modeling Language) diagrams are graphical representations used in software engineering which play a vital role in the design and development of software systems and various engineering processes. Large, good-quality datasets containing UML diagrams are essential for different areas in the industry, research and teaching purposes, however few exist in the literature and it is common to find duplicate elements in the existing datasets. This might affect the evaluation of the models obtained when using these datasets. This paper addresses the challenge of creating a ground truth dastaset of UML diagrams, including semi-automated inspection to remove duplicates and ensure the correct labeling of all UML diagrams contained in the dataset. In particular, a dataset of six UML diagram classes has been assembled, comprising a total of 2,626 images (426 activity diagrams, 636 class diagrams, 352 component diagrams, 357 deployment diagrams, 435 sequence diagrams, and 420 use case diagrams). Importantly, unlike other existing datasets, ours contains no duplicate elements and all diagrams are correctly labeled. Our curated dataset is a valuable and unique resource for the research community because it serves as a foundation for training and evaluating various models. In this paper, we demonstrate this by training and testing several deep learning models using our dataset, achieving highly satisfactory results compared to those presented in other works in the literature. Additionally, our experimental results highlight the potential of Visual Transformers for UML diagram classification, setting our approach apart from others that predominantly used Convolutional Neural Networks for similar tasks.

Printed Circuit Boards (PCBs) are essential to most electronic devices. Digitalization and upgradation of gadget generates lots of PCB-containing electronic waste. Conserving resources and protecting the environment requires recycling such e-waste. The present paper is focused on the recovery of metals from PCBs by physical pretreatment and hydrometallurgical processes. Initially, the waste PCBs were pre-treated to separate metallic and non-metallic fractions. The metallic concentrate was leached using nitric acid (strong oxidative agent) for dissolution of metals. The system was fully jacketed with scrubber and condenser so that no emission of toxic gases to the environment. The process parameters viz. effect of acid concentration, pulp density, temperature, time, etc. were optimized and the obtained data were scientifically validated. Kinetics leaching fitted well with the Shrinking core model, XB = kc.t for Cu, (1-(1-XB)1/2) for Ni and 1-3(1-XB)2/3 + 2(1-XB) for Pb. The optimized conditions derived from these studies will be useful for recovery of metals from waste PCBs, and tin left in the residue could be further treated for the purpose of safe disposal or the utilization in an environmentally friendly manner. The developed process provides environmental benefits and has potential to be commercialized after scale-up studies.

Background: Craniofacial injuries are thought to be commonly associated with traumatic brain injury (TBI), but there is conflicting evidence in the literature. The objective of this retrospective cohort study is to evaluate the incidence of TBI in patients with craniofacial trauma. Methods: The study included 2982 consecutive patients with either solitary or concurrent diagnoses of TBI and facial fractures, seen and evaluated at a single level II trauma center between January 1, 2010 and December 31, 2020. Continuous variables were compared against whether the patient had one or both diagnoses.Results: Of the target population, 55.8% had a solitary diagnosis of TBI, 30.28% had a solitary diagnosis of facial fractures, and 13.92% had concurrent diagnoses of both TBI and facial fractures. Patients with concurrent diagnoses had a significantly longer mean length of stay (LOS) compared to those with solitary diagnoses (9.92 ± 16.33 days vs. 6.21 ± 10.96 days, p&lt;0.01), but age (p=0.68) and ICU LOS (p=0.09) did not differ significantly between the two groups. Conclusions: Trauma to the face should be given special attention due to the close relationship between facial bones and the brain. Patients with concurrent diagnoses of TBI and facial fractures had worse hospital outcomes than those with solitary diagnoses of either TBI or facial trauma.

This paper, the second in a series of two, describes the experimental results for removing arsenic from the dust collected in the electrostatic precipitators of a fluidized bed roasting oven (RP dust). The RP dust produced is discharged as a toxic waste, although its copper content is close to 20% by weight. This work aims to process the RP dust; until obtained a material with a low concentration of arsenic, which could be recirculated in smelting operations and recover the valuable metals. Based on the successful experience obtained in the first document with FS dust, this work proposes to use the reduction-sulphidation-volatilization processes to carry out the volatilization of arsenic from RP dust. A set of experiments was realized in the roasting different ratios of the mixture of copper concentrate / RP dust, sulfur / RP dust varying temperature and roasting time; to reach an arsenic concentration <0.5% by weight. The RP dust was characterized using different techniques, that confirmed more than 20% by weight of copper and describing its structure as a small particle agglomerate (<5 µm), with a complex sulfoxide morphology. The main results indicated: that for a 75/25 mixture of the copper concentrate / PR dust under 700 ° C, 15 minutes roasting time with air atmosphere, the arsenic volatilization was 96% by weight. Meanwhile, for a 5/95 mixture of sulfur / RP dust, at 650 ° C, the volatilization of arsenic was 67% by weight.

This paper (the first of a series of two) seeks to describe the experimental results of removing arsenic from dust collected in electrostatic precipitators of copper into the pyro-metallurgy gas cleaning systems. The first work corresponds to the treatment of dust contained in gas off generated in the copper Flash Smelting Furnace process (FS dust), while the second focuses on the treatment of dust generated from a Fluidized Bed Roasting Furnace (RP dust). The dust is complex sulphur-oxide-metals with concentrations of copper above 10 wt % and relatively high concentrations of silver. Due to the dust has an arsenic’s concentration above 5 wt %, makes it difficult to recover valuable metals through hydro-metallurgical processes or by direct recirculation of the dust into a smelting furnace. Thus, the development of pyrometallurgical processes aimed to reduce the concentration of arsenic in dust is the main purpose of this study, particularly the production of a material suitable for recirculation in smelting operations. The works conducted provide a detailed characterization of the dust, including Quantitative Evaluation of Minerals by Scanning Electron Microscopy (QEMSCAN), Scanning electron microscope-Energy Dispersive X-ray analysis (SEM/EDS), X-ray diffraction (XR-D), elemental chemical analysis using Atomic Adsorption (A. A.) and X-Ray Fluorescence (X-RF). By considering that arsenic volatilization requires a process of reduction-sulphidation-volatilization, the works explore the roasting of mixtures of copper concentrate/dust, sulphur/dust and pyrrhotite/dust. The degree of volatilization was determined by elemental chemical analysis of arsenic in the mixture after and before the roasting process. The results indicated the effect of parameters such as temperature, gas flow, gas composition and the ratio of mixtures (concentrate, sulphur or pyrrhotite)/dust on the volatilization of arsenic. The findings indicate that the concentration of arsenic in the FS dust can be reduced to a relatively low level (<0.5 wt %), allowing to the material to be recirculated into smelting processes.

In this paper we show how to efficiently implement parallel discrete simulations on Multi-Core and GPU architectures through a real example of application: a cellular automata model of laser dynamics. We describe the techniques employed to build and optimize the implementations using OpenMP and CUDA frameworks. We have evaluated the performance on two different hardware platforms that represent different target market segments: high-end platforms for scientific computing, using an Intel Xeon Platinum 8259CL server with48cores and also an NVIDIA Tesla6V100 GPU, both running on Amazon Web Server (AWS) Cloud, and on a consumer-oriented platform, using an Intel Core i9 9900k CPU and an NVIDIA GeForce GTX 1050 TI GPU. Performance results are compared and analysed in detail. We show that excellent performance and scalability can be obtained in both platforms, and we extract some important issues that imply a performance degradation for them. We also found that current Multi-Core CPUs with large core numbers can bring a performance very near to that of GPUs, even similar in some cases.

Fiber optic sensors cannot measure damage; for getting information about damage from strain measurements, additional strategies are needed, and several alternatives have been proposed. This paper discuss two independent concepts: the first one is based on detecting the new strains appearing around a damage spot; the structure does not need to be under loads; the technique is very robust, damage detectability is high, but it requires sensors to be located very close to the damage, so it is a local technique. The second approach offers a wider coverage of the structure, it is based on identifying the changes caused by the damage on the strains field in the whole structure for similar external loads. Damage location does not need to be known a priori, detectability is dependent upon the sensors network density, damage size and the external loads. Examples of application to real structures are given.

Objectives: In this retrospective observational study, it is intended to establish how the implementation of the use of antimicrobial optimization programs at the hospital and ICU level in a Sincelejo Sucre Clinic has significantly impacted the improvement of the rational use of antibiotics1, due to the alarming situation of increasing antibiotic resistance. Materials and methods: The methodology used was to analyze the Excel database of the Clinic, in such a way that it would allow comparing the pre-PROA and post-PROA data of 4 antibiotics, ceftriaxone3, ciprofloxacin4, meropenem5 and vancomycin6, measured in Daily Dose. defined. Results: According to the DDD values obtained for the 4 antibiotics, a reduction in DDD was identified in the post-Proa period. On the other hand, considering the DDD reported by the WHO for each of the antibiotics, significant differences were verified compared to the DDD obtained in the clinic in the hospitalization and ICU services. Conclusions: In conclusion, in the clinic there was evidence of a reduction in DDD in the post-ASP2 period compared to the pre-PROA period, both in hospitalization and in the ICU, as well as a slight to large effect with Cohen's D.

In Mexico viticulture represents the second source of employment in the agricultural area after the fruit and vegetable sector. In developed countries, remote sensing is widely used for vineyard monitoring, however, this tool is barely used in developing countries of Iberoamerica. In this re-search, our overall objective is to characterize two vineyards in the state of Queretaro (Mexico) using Sentinel-2 and meteorological data, specifically spectral and thermal indices. Results showed that spectral indices obtained from Sentinel-2 bands have characterized adequately the phenolog-ical evolution of the different varieties of the vineyards. The Modified Soil-Adjusted Vegetation Index (MSAVI) was adequately used to discriminate the first stages of vineyards, while the Nor-malized Difference Vegetation Index (NDVI) was useful to monitor vineyards during the rest stages of vineyards. Thermal indices have shown that the best grape varieties were those that can adapt to both cooler and warmer temperatures, have a reasonable ripening period, and can produce wines with balanced acidity and flavors. In conclusion, the combination of meteorological (including thermal indices) and remote sensing data (NDVI and MSAVI) provide information for choosing the suitable grape variety for this region.

Communal lands covers a surface area of 1 million hectares in the Galicia-North Portugal region (northwest Iberian Peninsula). The average size of this land ownership type is 500 ha in Portugal and 200 ha in Galicia. The region has a Gross Domestic Product (GDP) lower than other developed regions of Europe, being considered within Objective 1 of the European Union (EU). For centuries, the baldios and montes veciñais en man común (MVMC) have played a key role in the economy of rural areas of Portugal and Galicia respectively. This function was lost throughout the 20th century due to forestry policies developed especially in the dictatorial regimes established in both Spain and Portugal, bringing about an important decline in agricultural practices. The restoration of democratic regimes returned ownership of the communal lands to the local/rural communities. Taking into account the extent and large average size of these lands, our aim was to describe the potential use and limitations of the communal lands, as well as the influence on sustainable rural development regarding the numerous ecosystem services it offers. An Analytic Hierarchy Process (AHP) was employed to evaluate stakeholders opinions in relation to communal land sustainable management. Both rural areas, i.e. Galicia and North Portugal, have similar characteristics, provide the same type of benefits and require numerous social improvements to achieve sustainable development. Communal lands and small-scale business initiatives can support local produce markets while promoting biodiversity conservation and ecosystem services.

Although the need to assess hydration is well recognized, laboratory tests and clinical impressions are impractical and lack sensitivity to be clinically meaningful. Different approaches use bioelectrical impedance measurements to overcome some of these limitations and aid in classification of hydration status. One indirect approach utilizes single or multiple frequency bioimpedance in regression equations and theoretical models, respectively, with anthropometric measurements to predict fluid volumes (bioelectrical impedance spectroscopy; BIS) and estimate fluid overload based on deviation of calculated to reference extracellular fluid volume. Alternatively, bioimpedance vector analysis (BIVA) uses direct phase-sensitive measurements of resistance and reactance, measured at 50 kHz, normalized for height, then plotted on a bivariate graph, resulting in a vector with length related to fluid content normalized by standing height, and direction with phase angle that indexes hydration status. Comparison with healthy population norms enables BIVA to classify (normal, under- and over-) and rank (change relative to pre-treatment) hydration independent of body weight. Each approach has wide-ranging uses in evaluation and management of clinical groups with overhydration with an evolving emphasis on prognosis. This review discusses the advantages and limitations of BIS and BIVA for hydration assessment with comments on future applications.

Leishmaniasis are neglected diseases that affect regions such as South Asia, South Africa and Latin America, less developed regions. Current treatment, for cutaneous, mucocutaneous and visceral leishmaniosis, which are the main forms of the disease, is based on the administration of pentavalent antimonial and amphotericin B. However, these drugs have low efficacy and high toxicity. For this reason, the search for new treatments for this disease is necessary, based on studies of new molecules and their conformations. The research proposed the conformational study of brominated guanidine compounds with potential antileishmanial activity using Nuclear Magnetic Resonance (NMR) and X-ray diffraction (XRD) techniques. The present study involves the bro-minated molecules, LQOF-G2, LQOF-G30, LQOF-G35 and LQOF-G35-Br. The later was synthesized by the reaction of LQOF-G35 with NBS under IR irradiation at 120 Watts of potency and dichloro-methane as solvent by 12-h of exposition. The obtained results demonstrated the efficiency of the bromination method, since two bromines atoms entered the molecule. Furthermore, NMR analysis showed the occurrence of a conformational change from Z to E when compound LQOF-G35 was brominated to LQOF-G35-Br. This feature was well confirmed by comparative DRX study of the LQOF-G35 and LQOF-G35-Br compounds. The antileishmanial activity of LQOF-G2 e LQOF-G35 motivated the synthesis of new brominated compounds LQOF-G30 e LQOF-G35-Br.

The prevalence of diagnosed cases of autism has increased rapidly, which raise interest in studying the variables related to the well-being of these families. The purpose of this paper is to review recent literature on other variables related to family well-being such a parenting styles. We conducted a systematic review using PRISMA check list and bias assessment ESTROBE with the aim of analyzing if the concepts of autism, well-being and parenting style are related. We screened 753 references, 16 full text articles and abstracts were read. It was identified that authoritative parenting style, those based on warmth, establishing relationships and emotional bonding, and low expressed emotion were positively related to family well-being. On the other hand, authoritarian, permissive and overprotective styles, as well as critical, punishing and training-based were negatively associated with well-being and quality of family life.

Minimizing optical losses in resonant cavities is crucial for improving photonic device performance. This study focuses on the development of a simulation tool to analyze scattering losses in Fabry-Pérot interferometers (FPI), offering precise modeling of waveguide dynamics and contributing to accurate loss predictions across various platforms. Optical cavities often suffer from scattering losses due to surface roughness and material defects. Our approach integrates theoretical models and simulations to quantify these losses, utilizing the FPI as a model system. We identified upper and lower reflectivity thresholds, beyond which accurate measurement of losses becomes unreliable. For reflectivity below a certain threshold, measurement errors arise, while excessively high reflectivity can reduce fringe visibility and introduce detector sensitivity issues. Simulations were used to validate the model's ability to predict reflectivity and attenuation in waveguides with varying loss levels. The software’s flexibility to adjust transmission parameters for different cavity configurations enhances its utility for a broad range of photonic systems. Our study offers a novel methodology for optical loss analysis, with practical applications in optimizing photonic devices. By providing a reliable tool for precise loss measurement, this work supports advancements in optical technologies, enabling the design of more efficient, high-performance devices across various applications.

Infections due to Candida spp., they are a threat to global health, with high rates of morbidity and mortality due to their drug resistance, especially in immunocompromised people. Thus, the search for new alternatives is urgent today. In recent years, combined therapy with compounds of natural origin has been proposed as an alternative. Considering the biological potential of isoespintanol (ISO) and continuing with its study, the objective of this research was to assess the effect of ISO in combination with the antifungals, fluconazole (FLZ), amphotericin B (AFB) and caspofungin (CASP), against clinical isolates of C. tropicalis and evaluate the cytotoxic effect of this compound in the acute phase (days 0 and 14) and chronic phase (days 0, 14, 28, 42, 56, 70 and 84), in female mice (Mus musculus) of the Balb/c lineage. The results show that ISO can potentiate the effect of FLZ, AFB and CASP, showing synergism with these antifungals. Evaluation of the mice by direct vision showed no behavioral changes or variation in weight during treatment; furthermore, the analysis of the cytokines IFN-γ and TNF in plasma, peritoneal cavity lavage (PCL) and bronchoalveolar lavage (BAL) indicated that there was no inflammation process and histopathological studies of lung, liver and kidney showed no signs of toxicity caused by ISO; this was consistent with the analysis of oxaloacetic transaminases (GOT) and pyruvic transaminases (GPT), which remained in the standard range. These findings indicate that ISO does not have a cytotoxic effect at the doses evaluated. Our results place ISO as a monoterpene of interest in the search for compounds with pharmacological potential.

Graphene-based nanomaterials have emerged as promising materials for a wide range of applications.. Therefore, in the last years carbon nanoparticles have attracted great attention due to their low toxicity, high biocompatibility and easy preparation. Recently, N-doped carbon nanoparticles have been shown to have improved antibacterial activity over the undoped nanomaterial, but it is difficult to find correlations between the structure of the nanoparticle and its antibacterial activity. With this purpose, here, we analyze the effect of both, the nanoparticle size and the surface chemical composition of four N-doped carbon nanoparticles on the growth of Escherichia coli bacteria. Our results were analyzed using a Ligand-Substrate model based on the Monod´s equation, which allows us to interpret the dependence of the nanoparticle-bacteria affinity with the nanomaterial structure.

A via ferrata (from the German “klettersteig”, hereinafter VF) is a sports route located on forest and mountains vertical rock walls equipped with steps, chains, artificial dams, bridges and other fixed elements and which have a steel cable (safety cable) all the way along allowing users to secure their progress and avoid possible falls [1]. This article aims to analyse the state of the art of the VF sector in Spain, especially in terms of the regulations of obligatory compliance, in addition to defining the basic characteristics of the installations to ensure that these are safe for users, providing a previously non-existent summary of the most important recommendations regardless of the country where they are installed.

Climate change has become a major concern for developing countries given the risk that it posses on energy and food independence, and on general productivity. Despite having an energy system with low carbon intensity when compared to other Latin American countries, Colombia is already facing climate change impacts and requires urgent efforts to mitigate them. As a developing country, the challenge is bigger as policies for economic growth should be in line with the global commitment of reducing greenhouse gas emissions. With the aim of contributing to the design of climate policies, this study assesses the impact of economic development on the environment by examining the validity of the Environmental Kuznets Curve hypothesis for Colombia. Statistically validated and stable autoregressive distributed lag models are estimated for three different environmental indicators: carbon dioxide emissions, methane emissions, and ecological footprint. Moreover, the effects of other variables such as urbanization, foreign direct investment, value added of agricultural and industrial sectors, and energy use are analyzed with dynamic simulations. Empirical evidence supports a long-run equilibrium relationship among investigated variables and the existence of an inverted U-shaped EKC relationship between Gross Domestic Product (GDP) and methane emissions, and GDP and ecological footprint. Shifting to renewable energy sources and leveraging the use of cleaner technologies in agricultural and industrial sectors are found to be key for economic growth without harming the environment.

Finishing coatings in the wood-based composites industry not only influence the final appearance of the product but also serve to protect against fungi, and molds, and reduce the release of harmful substances, particularly formaldehyde and volatile organic compounds (VOCs). Carbon-rich materials, such as those derived from birch bark extraction, specifically suberin acids, can fulfil this role. Previous research has demonstrated that adding suberin acid residues (SAR) at 20% and 50% by weight significantly enhances the gas barrier properties of surface finishing materials based on poly(lactide) (PLA) and polycaprolactone (PCL), particularly in terms of Total VOC (TVOC) and formaldehyde emissions. This study aims to explore whether these properties can be further improved through the incorporation of nano-zinc oxide (nano-ZnO). Previous research has shown that these nanoparticles possess strong resistance to biological factors and can positively affect the characteristics of nanofilms applied as surface protection. The study employed PLA and PCL finishing layers blended with SAR powder at 10% w/w and included 2% and 4% nano-zinc oxide nanoparticles. The resulting blends were milled to create a powder, which was subsequently pressed into 1 mm thick films. These films were then applied to raw particleboard surfaces. TVOC and formaldehyde emission tests were conducted. Additionally, the fungal resistance of the coated surfaces was assessed. The results showed that PLA/SAR and PCL/SAR composites with the addition of nano-zinc oxide nanoparticles exhibited significantly improved barrier properties, offering a promising avenue for developing biodegradable, formaldehyde-free coatings in the furniture industry with enhanced features. Furthermore, by utilizing SAR as a post-extraction residue, this project aligns perfectly with the concept of upcycling.

We present a model of space that considers it to be a quantized dynamical entity which is a component of the universe along with matter and radiation. The theory is used together with thermodynamic data to provide a new view of cosmic evolution and an insight into the nature of dark energy and dark matter. Space is made up of energy quanta. The universe started from an atomic size volume at very high temperature and pressure near the Planck epoch. Upon expansion and cooling, phase transitions occurred resulting in the formation of radiation, fundamental particles, and matter. These nucleate and grow into stars, galaxies, and clusters. From a phase diagram of cosmic composition, we obtained a correlation between dark energy and the energy of space. Using the Friedmann equations, data from WMAP studies of the composition of the universe at 3.0 x 10⁵ (a=5.25 x 10^-2) years and at present (a=1), are well fitted by our model with an equation of state parameter, w= -0.7. The accelerated expansion of the universe, starting at about 7 billion years, determined by BOSS measurements, also correlates well with the dominance of dark energy at 7.25 x 10⁹ years ( a= 0.65). The expansion can be attributed to Quintessence with a space force arising from a quantum space field. From our phase diagram, we also find a correlation suggesting that dark matter is a plasma form of matter similar to that which existed during the photon epoch immediately prior to recombination. Our Quantum Space Model leads to a universe which is homogeneous and isotropic without the need for inflation. The thermodynamics of expansion is consistent with BOSS data that show the process to be adiabatic and the rate of expansion decelerating during the first 6 billion years after the Big Bang. However, it became non-adiabatic and accelerating thereafter. This implies an influx of energy from a source outside the universe; it warrants consideration as a possible factor in the accelerated expansion of the universe.

Brushless Synchronous Machines (BSM) are replacing conventional synchronous machines with static excitation in generation facilities due to the absence of sparking and lower maintenance. However, this excitation system makes challenging measuring electric parameters in the rotor. This fact highly difficult the detection of ground faults, which are the most common type of electrical fault in electric machines. In this paper, a ground fault detection method for BSM is proposed. It is based on an inductive AC/DC rotating current sensor installed in the shaft. In case of a ground fault in the rotating parts of the BSM, a fault current will flow through the rotor’s sensor, inducing voltage in its stator. Analyzing the frequency components of the induced voltage the detection of a ground fault in the rotating elements is possible. The ground faults detection method proposed covers the whole rotor and discern between DC and AC sides. To corroborate the detection method, experimental tests have been performed using a prototype of this sensor connected to laboratory synchronous machines achieving satisfactory results.

This review examines methodologies studying soil carbon in urban green spaces, a field requiring higher attention as their ecosystem services are valued and urban mitigation plans against climate change are developed. In the growing global urbanization, urban green spaces play a crucial role as nature-based solutions to address climate challenges, demanding efficient carbon accounting and reduction strategies. In this research, a systematic review was conducted assessing publications from 2021 to 2023 in the databases Web of Science and Scopus. Findings expose the lack of standardization in the methodologies used to study soil carbon in urban green spaces, evidencing in situ measurements at different sampling depths and studies without longitudinal monitoring over time. In addition, studies originated primarily in universities from China, United States and Spain, which focused on carbon in the form of Soil Organic Carbon and Total Carbon. Based on these findings, recommendations are made advocating for the combination and standardizing methodologies. This review offers valuable insights that shed light on an ignore and often overseen issue. Further studies and standardized methodology are needed, to help cities efforts in their pursuit of carbon neutrality by acknowledging the influential role of urban soils, especially green spaces.

We present a thermodynamic approach in modeling the evolution of the universe based on a theory that space consists of energy quanta, the spaceons. From wave-particle duality, they can be treated as an ideal gas. The model is similar to the Big Bang but without Inflation. It provides an insight into the nature of dark energy and dark matter, and an explanation for the accelerated expansion of the universe. The universe started from an atomic size volume of spaceons at very high temperature and pressure. Upon expansion and cooling, phase transitions occurred resulting in the formation of fundamental particles, and matter. These nucleate and grow into stars, galaxies, and clusters due to the action of gravity. From the cooling curve of the universe we constructed a thermodynamic phase diagram of cosmic composition, from which we obtained the correlation between dark energy and the energy of space. Using Friedmann’s equations, our model fits well the WMAP data on cosmic composition with an equation of state parameter, w= -0.7. The dominance of dark energy started at 7.25 x 10⁹ years, in good agreement with BOSS measurements. The expansion of space is attributed to a scalar quantum space field. Dark Matter is identified as a plasma form of matter similar to that which existed during the photon epoch, prior to recombination. The thermodynamics of expansion of the universe was adiabatic and decelerating during the first 7 billion years after the Big Bang; it accelerated thereafter. A negative pressure for Dark Energy is required to sustain the latter. This is consistent with the theory of General Relativity and the law of conservation of energy. We propose a mechanism for the acceleration as due to consolidation of matter forming Dark Energy Stars (DES) and other compact objects. The resulting reduction in gravitational potential energy feeds back energy for the expansion. Space will continue to expand and dark energy will undergo phase transition to a Bose-Einstein condensate, a superfluid form of matter. Self-gravitation can cause a bounce and start a new Big Bang. We show how the interplay of gravitational and space forces leads to a cyclic, maybe eternal, universe.

When we attempt to define life, we tend to refer to individuals, those that are alive. But these individuals might be cells, organisms, colonies... ecosystems? We can describe living systems at different scales. Which ones might be the best ones to describe different selves? I explore this question using concepts from information theory, ALife, and Buddhist philosophy. After brief introductions, I review the implications of changing the scale of observation, and how this affects our understanding of selves at different structural, temporal, and informational scales. The conclusion is that there is no single ``best'' scale for a self, as this will depend on the scale at which decisions must be made. Different decisions, different scales.

The study analyzed Ecuador's presence in the Web of Science (WoS) post-pandemic from a multivariate dynamic, highlighting a significant transformation in scientific communication towards open access (OA). The methodology integrated multivariate statistical techniques, using R and specialized tools, to process 9,085 relevant articles, 52% of the Ecuadorian publications in WoS between 2019 and 2021 were open access. This movement reflects a commitment to quality research and accessibility, showing an increase in publications and citations under OA. The research underscores the importance of establishing robust national OA policies in Ecuador to promote scientific collaboration and an equitable distribution of knowledge. Despite funding challenges and the lack of specific regulations, educational institutions in Ecuador have maintained a constant scientific output, adapting to the global environment and the demand for transparent information. The study concludes that there is an urgent need for a holistic approach to OA in the country, recognizing the progress made despite the difficulties.

While digitization can make the health industry faster and more efficient, there are many financial, social and organizational obstacles and barriers to its implementation. This article offers a systematic review of the main troubles detected from the literature review. Also there is a proposal of new kind of restrictions to pay attention. Finally, its offer an heterodox reading about the problem analyzed.

Information theory has been developed for seventy years with technological applications that have transformed our societies. The increasing ability to store, transmit, and process information is having a revolutionary impact in most disciplines. The goal of this work is to compare the formal approach to information with Buddhist philosophy. Considering both approaches as compatible and complementary, I argue that information theory can improve our understanding of Buddhist philosophy and vice versa. The resulting synthesis leads to a worldview based on information that overcomes limitations of the currently dominating physics-based worldview.

In the present work, we evaluate the prediction capability of six Pedotransfer functions (PTFs), reported in the literature, for the saturated hydraulic conductivity estimations (Ks). We used a database with 900 measured samples obtained from the Irrigation District 023, in San Juan del Rio, Queretaro, Mexico. Additionally, six new PTFs were construct for Ks from clay percentage, bulk density and saturation water content data. The results show, for the evaluated models, that one model present an overestimation for Ks>0.5 cm h-1 values, three models have a underestimation for Ks>1.0 cm h-1 and two models have a good correlation (R2>0.98) but are necessary more than three parameters. Nevertheless, the last two models requires from three to four parameters in order to get the optimization. By other hand, the models proposed in this work have a similar correlation with a less number of parameters: the fit is seen to be much better than using the existing ones, achieving a correlation of R2 = 0.9822 with only one variable and a R2 = 0.9901 when we use two.

When it comes to air pollution complaints, odours are often the most significant contributor. Sources of odour emissions range from natural to anthropogenic. Mitigation of odour can be challenging, multifaceted, site-specific, and is often confounded by its complexity—defined by existing (or non-existing) environmental laws, public ordinances, and socio-economic considerations. The objective of this paper is to review and summarize odour legislation in selected European countries (France, Germany, Austria, Hungary, United Kingdom, Spain, The Netherlands, Italy, Belgium), North America (USA and Canada), South America (Chile and Colombia), as well as Oceania (Australia and New Zealand) and Asia (Japan, China). Many countries have incorporated odour controls into their legislation. However, odour-related assessment criteria tend to be highly variable between countries, individual states, provinces and even counties and towns. Legislation ranges from (1) no specific mention in environmental legislation that regulates pollutants which are known to have an odour impact to (2) extensive details about odour source testing, odour dispersion modeling, ambient odour monitoring, (3) setback distances, (4) process operations, and (5) odour control technologies and procedures. Agricultural operations are one specific source of odour emissions in rural and suburban areas and a model example of such complexities. Management of agricultural odour emissions is important because of the dense consolidation of animal feeding operations and the advance of housing development into rural areas. Overall, there is a need for continued survey, review, development, and adjustment of odour legislation that considers sustainable development, environmental stewardship, and socio-economic realities, all of which are amenable to a just, site-specific, and sector-specific application.

The scientific fields of complexity, artificial life (ALife), and artificial intelligence (A.I.) share commonalities: historic, conceptual, methodological, and philosophical. Although their origins trace back to the 1940s birth of cybernetics, they were only able to properly develop as modern information technology became available. In this perspective, I offer a personal (and thus biased) account of the expectations and limitations of these fields, some of which have their roots in the limits of formal systems. I will use interactions, self-organization, emergence, and balance to compare different aspects of complexity, ALife, and A.I. Even when the trajectory of the paper is influenced by my personal experience, the general questions posed (which outweigh the answers) hopefully will be useful to align efforts in these fields toward overcoming --- or accepting --- their limits.

Cortical actomyosin flows, among other mechanisms, scale up spontaneous symmetry breaking and thus play pivotal roles in cell differentiation, division, and motility. According to many model systems, myosin motor-induced local contractions of initially isotropic actomyosin cortices are nucleation points for generating cortical flows. However, the positive feedback mechanisms by which spontaneous contractions can be amplified towards large-scale directed flows remain mostly speculative. To investigate such a process on spherical surfaces, we reconstituted and confined initially isotropic minimal actomyosin cortices to the interfaces of emulsion droplets. The presence of ATP leads to myosin-induced local contractions that self-organize and amplify into directed, large-scale actomyosin flows. By combining our experiments with theory, we found that the feedback mechanism leading to a coordinated, directional motion of actomyosin clusters can be described as asymmetric cluster vibrations, caused by intrinsic non-isotropic ATP consumption, in conjunction with spatial confinement. By tracking individual actomyosin clusters, we identified fingerprints of vibrational states as the basis of directed motions. These vibrations may represent a generic key driver of directed actomyosin flows under spatial confinement in vitro and in living systems.

I present a personal account of self-organizing systems. As such, it is necessarily biased and partial. Nevertheless, it should be useful to motivate useful discussions. The relevant contribution is not my attempts at answering questions (maybe all my answers are wrong), but the steps towards framing relevant questions to better understand self-organization, information, complexity, and emergence. With this aim, I start with a notion and examples of self-organizing systems (what?), continue with their properties and related concepts (how?), and close with applications (why?).