Many empirical and theoretical studies indicate that Brownian motion and diffusion models as its mean field counterpart provide appropriate modelling techniques for individual insect movement. However, this traditional approach has been challenged and conflicting evidence suggests that an alternative movement pattern such as Lévy walks can provide a better description. Lévy walks differ from Brownian motion since they allow for a higher frequency of large steps, resulting in a faster movement. Identification of the ‘correct’ movement model that would consistently provide the best fit for movement data is challenging and has become a highly controversial issue. In this paper, we show that this controversy may be superficial rather than real if the issue is considered in the context of trapping or, more generally, survival probabilities. In particular, we show that almost identical trap counts are reproduced for inherently different movement models (such as the Brownian motion and the Lévy walk) under certain conditions of equivalence. This apparently suggests that the whole ‘Levy or diffusion’ debate is rather senseless unless it is placed into a specific ecological context, e.g. pest monitoring programmes.

To mitigate the spread of the COVID-19 coronavirus, some countries have enforced more stringent non-pharmaceutical interventions in contrast to those widely adopted (for e.g. the state of Kuwait). In addition to standard practices such as enforcing curfews, social distancing, and closure of non-essential service industries, other non-conventional policies such as the total confinement of highly populated areas has also been implemented. In this paper, we model the movement of a host population using a mechanistic approach based on random walks, which are either diffusive or super-diffusive. Infections are realised through a contact process, whereby a susceptible host may be infected if in close spatial proximity of the infectious host. Our focus is only on the short-time scale prior to the infectious period, so that no further transmission is assumed. We find that the level of infection depends heavily on the population dynamics, and increases in the case of slow population diffusion, but remains stable for a high or super-diffusive population. Also, we find that the confinement of homogeneous or overcrowded sub-populations has minimal impact in the short term. Finally, we discuss the possible implications of our findings for total confinement in the context of the current situation in Kuwait.

Purpose: To evaluate the efficacy and survival rates of same session ab interno trabeculectomy with the trabectome and Ahmed glaucoma valve implant (AT) in comparison to the Ahmed glaucoma valve alone (A). Method: A total of 107 eyes undergoing primary glaucoma surgery were enrolled in this retrospective comparative case series, including 48 eyes which underwent AT and 59 eyes which received A alone. Participants were identified using the procedural terminology codes, and their medical records were reviewed. The primary outcome measure was surgical success, defined as intraocular pressure (IOP) > 5 mmHg, ≤ 21 mmHg, and IOP reduction ≥ 20% from baseline at two consecutive visits after three months, no reoperation for glaucoma. Secondary outcome measures were IOP, the number of glaucoma medications, incidence of a hypertensive phase, and best corrected visual acuity (BCVA). Results: The cumulative probability of success at one year was 70% in AT, and 65% in A (p=0.85). IOP decreased significantly from 26.6 ± 10.1 mmHg at baseline to 14.7 ± 3.3 mmHg at the final follow-up in AT (p= 0.001). The corresponding numbers for A were 28.8 ± 10.2 and 16.7 ± 4.9, respectively (p= 0.001). The final IOP was significantly lower in AT (p= 0.022). The number of medications at baseline was comparable in both groups (2.6 ± 1.2 in AT and 2.5 ± 1.3 in A, p=0.851). Corresponding number at 1 year visit was 1.2±2 in AT and 2.8±1.8 in A (p=0.001). The incidence of a hypertensive phase was 18.7% in AT and 35.5% in A (p=0.05). HP resolved in only 30% of eyes. The criteria for HP resolution were fulfilled in 9 eyes (30%). There was no difference in the rate of resolution of the hypertensive phase between AT and A (33.3% and 28.5%, respectively, p=0.67). Conclusion: Ahmed glaucoma valve implant with same session trabectome surgery significantly decreased the rate of the hypertensive phase and postoperative IOP as well as the number of glaucoma medications.

Depth maps produced by LiDAR based approaches are sparse. Even high-end LiDAR sensors produce highly sparse depth maps, which are also noisy around the object boundaries. Depth completion is the task of generating a dense depth map from a sparse depth map. While the traditional approaches focus on directly completing this sparsity from the sparse depth maps, modern techniques use RGB images as a guidance tool to resolve this problem. Whilst many others rely on affinity matrices for depth completion. Based on these approaches, we have sub-divided the literature into two major categories; traditional approaches and backbone-based approaches. The latter is further sub-divided into two-branch, and spatial propagation approaches. The two-branch approaches still have a sub-category named guided-kernel approaches. In this paper, for the first time ever we present a comprehensive survey of depth completion methods. We present a novel taxonomy of depth completion approaches, review and detail different state-of-the art techniques within each category for depth completion of LiDAR data, and provide quantitative results for the approaches on KITTI and NYUv2 depth completion benchmark datasets.

Objective: The influence of gender on the number and pattern of co-morbid psychiatric illness was archivally compared between patients with and without an Alcohol Use Disorder (AUD) among psychiatrically treated individuals drawn from a large Danish birth cohort. Method: By age 45, fifteen percent of the Copenhagen Perinatal Birth Cohort (N=8,109) had been treated in a Danish psychiatric facility. Of those 1,247 patients, 368 were assigned an AUD diagnosis (29.5%). All psychiatric diagnoses assigned to these patients, over all admissions, were classified into one of 14 broad ICD-10 F categories for comparative purposes. Results: More of the patients with an AUD diagnosis were male. Patients with an AUD diagnosis were significantly more likely to receive two or more non-AUD psychiatric diagnoses than patients without an AUD diagnosis. The number of psychiatric diagnoses was greater for female than male AUD patients, a difference not found among male and female patients without an AUD diagnosis. For patients with no AUD diagnosis, the influence of gender on the pattern of psychiatric disorders was similar to that commonly reported. In contrast, the influence of gender on the number and pattern of psychiatric disorders for patients with an AUD diagnosis indicated fewer gender differences. Several diagnostic categories that discriminated male from female patients without an AUD-related diagnosis, no longer discriminated male from female patients with an AUD-related diagnosis. Conclusions: Our findings suggest that gender differences associated with psychiatric comorbidity that have been reported in large heterogenous study, should not be generalized to specific diagnostic groups without further study.

Purpose: The pandemic, named COVID-19, which shook global economy, production and trade has equally affected the social and domestic lives of ours. In this study the COVID-19’s impact has been investigated on lack of social interaction, financial stress and how it influences the domestic violence in a developing country like Pakistan. The study focuses on some of the important factors that are root causes of increased domestic violence in Pakistan. Design/methodology/approach: The study is quantitative and survey questionnaire has been conducted for structural equation modelling (SEM) to evaluate the hypotheses. The modified scale was validated using confirmatory factor analysis, the Purposive and snowball sampling technique is used for collecting data from 200 respondents of Punjab Pakistan for data analysis through SPSS and SmartPLS. Findings: It is revealed that Covid 19 has a significant effect on lack of social interaction and financial stress. Moreover, lack of social interaction and financial stress also enhances domestic violence. Finally, lack of social interaction and financial stress mediates COVID-19 and domestic violence. Originality/value: This study appears to be frontier research which determines the impact of COVID-19 on lack of social interaction, financial stress and domestic violence particularly in a developing country like Pakistan.

Presence detection is essential in many applications, including smart homes, office automation, and public space management. Traditional technologies like infrared sensors and cameras frequently encounter obstacles due to privacy concerns, high costs, and complexity. The study provides a novel way to detect presence based on Wi-Fi signals and machine learning algorithms, utilizing the ESP8266 microcontroller. The suggested system attempts to reliably detect the presence of people in a given place by evaluating fluctuations in Wi-Fi signal strength and patterns. The theoretical basis of this strategy is investigated, including the ESP8266’s capabilities for Wi-Fi data gathering and the use of machine learning methods for data analysis. The methodology includes data collecting with the ESP8266, preprocessing, feature extraction, and training and evaluating machine learning models. This system’s potential uses include smart home automation, office occupancy tracking, and crowd management in public settings. The paper also discusses potential issues such as signal interference, data privacy concerns, and the limitations of Wi-Fi detection. Future work is also mentioned, including the suggested system’s installation and testing and enhancement proposals to improve accuracy and scalability. This research aims to provide a cost-effective, non-intrusive, and scalable presence detection system by harnessing the power of Wi-Fi signals and machine learning, enhancing intelligent environments

Increasing demand for electricity and modernization of power systems within competitive markets induce power systems to operate close to their stability limits. Therefore, a power system continuous monitoring and control by using voltage stability indices are known exigence. This is the first-ever effort, examined more than 40 voltage stability indices thorough an exhaustive study based in on their formulation, application, performance, and assessment measures. Which is conducted based on a logical and chronological order considering the most recent worldwide applied voltage stability indices. However, the generalizability of such an immense diversity of these indices in term of multivariable objectives subjects to a certain limitation to summate into a deciphered outcome. Despite all these obstacles, this study systematically reviews available indices in the literature within the past three decades to set out an integrated knowledge with an insight up-to-date exposition. That followed with a comparative analysis in term of their similarity, functionality, applicability, formulation, merit, demerit, and overall performances. Also, a broad categorization of voltage stability indices is addressed. This study with an immediate implication in practice as an exhaustive roadmap can be counted a planning and operation reference in the context of voltage stability for students, researchers, scholars, and practitioners.

Spectral photon counting cone-beam CT imaging is challenged by individual pixel response behaviour, which leads to noisy projection images and subsequent image artefacts like rings. Existing methods to correct for this either use calibration measurements, like signal-to-thickness calibration (STC), or perform post-processing ring artefact correction of sinogram data or scan reconstructions, without taking the pixel response explicitly into account. Here we present a novel post-processing method (DAC-shifting), which explicitly measures the current pixel response using flat field images, and subsequently corrects the projection data. The DAC-shifting method was evaluated with a repeat series of spectral photon counting imaging (Medipix3) of a phantom with different density inserts, and in iodine K-edge imaging. The method was also compared against PMMA based STC. The DAC-shifting method was shown to be effective in correcting individual pixel response, and was robust against detector instability. On the contrary, STC correction showed varying results, which was almost as good as DAC-shifting when data was acquired just after STC calibration, but worse with larger time differences. In K-edge imaging, DAC-shifting provides a sharper attenuation peak, and more uniform CT values, which is expected to benefit iodine concentration quantification.

At present there is a renewed interest in theories of ”modified” gravity. Here, under a more drastic modification enforced by Galilei group, we obtain a completely new gravitational structure, and which exists in addition to the already available general relativity of today. Correlated with this, we show that in addition, there is a new ”modified” quantum mechanics, in as much as it exists as an independent and new ”pure” non-relativistic quantum me- chanics, and which has no relativistic counterpart. This is in addition to the present quantum mechanics, where the relativistic and non-relativistic structures are counterparts of each other. The above holds, firstly due to the correlation between Galilei group and quantum mechanics. These math- ematical conclusions are consolidated by the fact that there exists a physical Majorana interaction between each neutron- proton pairs in nuclei. Galilei invariance of Majorana exchange in Majorana interaction, shows that the mass here is of pure gravitational nature, and which is immune to the other three forces. This makes an amazing connection between the gravitational force and the quantum mechanics. This pure gravitational mass would man- ifest itself as dark matter of the universe. It is our new modified gravity that generates the dark matter.

From the hospital wastewater, a novel bacteriophage was isolated and characterized. According to characterization properties, this bacteriophage belongs to the Siphoviridae family, the maximum bacteriophage titer was recorded at 37°C and a pH of 7.2, had a 44,789 bp linear double-strand DNA genome, and within the genome sequence, there are 61 genes, all of which are encoded into proteins. Although this bacteriophage does not have any virulence factors or antimicrobial resistance genes and had specific lytic activity against some antimicrobial resistance S. aureus clinical isolates.

Breast cancer is the most widespread malignancy in women from corner to corner of the world. Nanostructured lipid carrier (NLC) proved its efficacy in the treatment of cancer. NLC loaded with Imatinib (IMA) (NANIMA) was prepared and evaluated for in vitro efficacy in MCF-7 breast cancer cells. Hot homogenization method was used for the preparation of NANIMAs. Aqueous solution of surfactants (hot) was mixed with molten mixture of stearic acid and sesame oil (hot) under homogenization. The prepared NANIMAs were characterized and evaluated for size, polydispersity index, zeta potential, encapsulation efficiency, release studies, stability studies and MTT assay (cytotoxicity studies). The optimized NANIMA revealed particle size of 104.63 ± 9.55 d.nm, PdI of 0.227 ± 0.06 and EE of 99.79 ± 0.03. All NANIMAs revealed slow and sustained release behaviour. The surfactants used in the preparation of NANIMAs exhibited their effects on particle size, zeta potential, encapsulation efficiency, stability studies and release studies. The cytotoxicity studies unveiled 8.75 times increase in cytotoxicity for optimized NANIMA (IC50 = 6 µM) when compared with IMA alone (IC50 = 52.5 µM) on MCF-7 breast cancer cells. After this, NLC containing IMA possibly will be employed for the cure of breast cancer. A lesser amount of IMA loaded NLC will be sufficient than IMA alone for the treatment of breast cancer. Moreover, the patient will exhibit not as much of adverse effects as in case of IMA alone. Consequently, NANIMA could prove to be useful for effective therapeutic outcome in breast cancer treatment.

Hybrid materials derived adsorbents have showed a great applicable efficiency in various fields including industrial uses and environmental remediation. Herein, the zinc oxide nanoparticles anchored carbon (ZnO-C) is fabricated and utilized for wastewater treatment by adsorption of Zn(II), Cd(II), Co(II) and Mn(II). The surface and structural characteristics are examined by TEM, SEM, XRD, FTIR, EDS and BET surface area. The Kinetics and equilibrium investigations are applied to optimize the adsorptive removal of Zn(II), Cd(II), Co(II) and Mn(II) onto ZnO-C. Results indicated formation of ZnO-C in crystalline spherical granules with nano-size between 29.3 and 48.8 nm. In addition, the spherical granules are gathered to form clusters. The FTIR indicated that the ZnO-C surface is rich with OH groups and ZnO. The adsorption capacity is reported as 212, 209, 200 and 230 mg/L for Zn(II), Cd(II), Co(II) and Mn(II) respectively. The optimum condition for maximum adsorption were pH between 5 and 6, contact time of 180 min and adsorbent dose of 0.1 g/L. The adsorptive removal data modeling for uptake of Zn(II), Cd(II), Co(II) and Mn(II) onto ZnO-C showed agreement with the assumption of pseudo 2nd order kinetic model and Freundlich isotherm suggesting fast adsorption rate and multilayer mechanism. The achieved adsorption capacity using the prepared ZnO-C is more effective compared to ZnO, carbon, Fe3O4 and Fe3O4-C. Real wastewater samples are applied including valley water, industrial wastewater and rain wastewater and evaluated for applicable uptake of Zn(II), Cd(II), Co(II) and Mn(II) using ZnO-C and Fe3O4-C with high efficiency.

Automotive aerodynamics comprises of the study of aerodynamics of road vehicles. Its main goals are reducing drag, minimizing noise emission, improving fuel economy, preventing undesired lift forces and minimizing other causes of aerodynamic instability at high speeds. The Ahmed body has the form of a highly simplified car, consisting of a blunt nose with rounded edges fixed onto a box-like middle section and a rear end that has an upper slanted surface, the angle of which can be varied. It retains vital features of real vehicles in order to study the flow fields around it and the related turbulence models which characterizes the actual flow at elevated Reynolds number. In the present study, the aerodynamic behavior of this body is investigated numerically by the aid of commercial CFD tool: Ansys Fluent. The results of the simulation are validated with available experimental data and results of the simulations from other literatures. The numerical data were obtained for a fixed free stream velocity of 25 m/s at the inlet. The simulations were performed at a fixed slant angle of 25 degree and zero yaw angle. The present study focuses on how local refinement of mesh inside the concerned body and the outside, helps affect the results and for which grid dependency test is the primary objective of this paper. The present study also helps demonstrate how the drag of the body behaves, which is mainly the effect of pressure drag force generated at the rear portion of the body. The study also focuses on important properties like the velocity magnitude at different locations for different meshing cases, and to capture the flow pattern in the front or near the wake region. The study can be further helpful to future researchers in determining resistance, fuel efficiency etc. helping designers to optimize in specialized areas for better efficiency.

Annually, more than 1.5 million preventable new hepatitis B (HBV) infections continue to occur, with an estimated global burden of 296 million individuals living with chronic hepatitis B infection. This substantial health challenge results in over 820,000 annual deaths attributed to complications such as liver cirrhosis and hepatocellular carcinoma (HCC). HBV vaccination remains the cornerstone of public health policy to prevent chronic hepatitis B and its related complications. It serves as a crucial element in the global effort to eliminate HBV, as established by the World Health Organization (WHO), with an ambitious 90% vaccination target by 2030. However, reports on global birth dose coverage reveal substantial variability, with an overall coverage rate of only 46%. This comprehensive review thoroughly examines global trends in HBV vaccination coverage, investigating the profound impact of vaccination on HBV prevalence and its consequences across diverse populations, including both high-risk and general demographics. Additionally, the review addresses the formidable challenges and facilitating factors essential for achieving WHO's HBV vaccination coverage objectives and elimination strategies in the coming decade and beyond.

In this paper, we will use the maximum likelihood estimation (MLE) and the Bayes methods to perform estimation procedures for the reliability of stress-strength ℜ=P[X>Y] based on independent adaptive progressive censored samples that were taken from the Chen distributions. An approximate confidence interval of ℜ is constructed using a variety of classical techniques, such as the normal approximation of the MLE, the normal approximation of the log-transformed MLE, and the percentile bootstrap (Boot-p) procedure. The Bayesian estimation of ℜ is obtained based on the balanced loss function, which comes in two versions here, the symmetric balanced squared error (BSE) loss function and the asymmetric balanced linear exponential (BLINEX) loss function. When estimating ℜ using the Bayesian approach, all the unknown parameters of the Chen distributions are assumed to be independently distributed and to have informative gamma priors. Further, a mixture of Gibbs sampling algorithm and Metropolis-Hastings algorithm is used to compute the Bayes estimate of ℜ and the associated highest posterior density credible interval. In the end, simulation research are used to assess the general overall performance of the proposed estimators and a real data set is provided to exemplify the theoretical results.

In this paper, design of optical spectral filters based on mode coupling of optical fibers is presented. The finite difference method is applied to find the dispersion characteristics of optical fiber coupler constructing from two fibers as a composite multi-dielectric waveguide with different cores but the same cladding. Also, the field distribution for both fibers as a separate and as a composite waveguide. The spectral characteristics of the filters are investigated depending on the coupling of two linear polarized modes LP01 and LP11. The dependence of the transmission coefficient on operating wavelengths is illustrated. Finally, the spectral bandwidth of filter as a function of the distance between the two cores is addressed.

The inhibition impacts of 1,10-Phenanthroline-5,6-diamine (PTDA) on mild steel in 1 M HCl solution were investigated through weight loss method. The inhibition efficiencies of PTDA increase with increase in PTDA concentration at the temperature 303. Weight loss method indicate that PTDA is an excellent inhibitor the inhibition efficiency of 81.5% at the maximum PTDA concentration of 0.5 g/L at the temperature 303K.

A comparative efficacy of apathogenic genotype I (V4) and lentogenic genotype II (LaSota) strains of live Newcastle disease virus (NDV) vaccines was done following vaccination with pathogen-associated molecular pattern (PAMP) H9N2 avian influenza vaccine and challenge with velogenic NDV genotype VII.1.1 (vNDV-VII.1.1). Eight groups (Gs) of day-old chicks were used (n=25). Groups 1-4 received a single dose of PAMP-H9N2 subcutaneously, while Gs (1, 5) and (2, 6) received eye drops of V4 and LaSota respectively as twice doses. All Gs except 4 and 8 were intramuscularly challenged with vNDV-VII.1.1 at 28th days of age. No signs were detected in Gs 1, 5, 4, and 8. The mortality rates were 0% in Gs 1, 4, 5, and 8; 40% in G2; 46.66% in G6; and 100% in Gs 3 and 7. Lesions were recorded as minimal in Gs 1 and 5, but mild to moderate in Gs 2 and 6. The lowest significant viral shedding was detected in Gs 1, 2, and 5. In conclusion, two successive vaccinations of broilers with a live V4 NDV vaccine provided a higher protection against vNDV-VII.1.1 challenge than LaSota. Besides, PAMP-H9N2 with live NDV vaccines induced more protection than live vaccine alone.

Abstract: Background: Exercise Training at work has the potential to improve employees’ produc-tivity, health, and well-being. However, exercise interventions to healthcare workers in hospitals may be challenged by a high time pressure and the ongoing workflow with patient care. Objective: The aim was to identify barriers and facilitators for participation in exercise training during work in a hospital department. Methods: Eight semi-structured interviews were conducted with hospital employees of different staff groups, who participated in 12 weeks exercise twice weekly. The data analysis was a thematic approach based on the Theoretical Domains Framework and the COM-B factors in the Behavior Change Wheel. Results: Barriers and facilitators varied between different groups. Barriers included limited structure, busyness, and a discouraging culture. Facilitators in-cluded gaining a feeling of community, psychological and physical well-being. Seven contextual subthemes were vital for successful implementation of exercise in a hospital setting. Conclusions: The informants appreciated exercise training during work and wished to participate. Inpatient departments’ informants had difficulties participating in the intervention, whilst those with more administrative tasks found it easier. This study identified barriers and facilitators vital for a successful implementation of an exercise training intervention in a hospital department to improve health, wellbeing, and productivity amongst hospital employees. It explains how future interventions can improve reach, adoption, and implementation of exercise training interventions for hospital staff.

Seaweeds are regarded as one of the valuable coastal resources because of their usage in human food, cosmetics, and other industrial items. They also play a significant role in providing nourishment, shelter, and breeding grounds for fish and many other sea species. This study introduces a newly developed seaweed enhancing index (SEI) using spectral bands of near-infrared (NIR) and shortwave infrared (SWIR) of Landsat 8 satellite data. The seaweed patches in the coastal waters of Karachi, Pakistan were mapped using SEI, and its performance was compared with other commonly used indices - Normalized Difference Vegetation Index (NDVI) and Floating Algae Index (FAI). The accuracy of the mapping results obtained from SEI, NDVI, and FAI was checked with field verified seaweed locations. The purpose of the field surveys was to validate the results of this study and to evaluate the performance of SEI with NDVI and FAI. The performance of SEI was found better than NDVI and FAI in enhancing submerged patches of the seaweed pixels what other indices failed to do.

Under Egyptian soil conditions, when phosphorus fertilizers were applied to the soil, it gets fixed and converts to unavailable form, leading to low solubility for the plant. This study were fulfilled on sweet potato (cv. Beauregard) under undesirable soil properties (CaCO3 10.8 vs 11.3%) using Bacillus megaterium DSM 2894 strain under different five mono calcium phosphate (CSP) levels [(69(CSP20); 138(CSP40); 207 (CSP60); 276 (CSP80) and 345 ((CSP100) kg ha-1 of calcium superphosphate (CSP)] to arise the potential efficiency of some nutrients uptake and decease the applied total amount of CSP in 2019 and 2020 seasons. The results mentioned that highest values were obtained by inoculated plants with DSM2894 strain under 20, 60 and 100% of CSP for all studied nutrients content in both seasons, except Mn content in the 2019. Also, inoculated plants with DSM2894 under previous treatments for all tuberous root nutrients content, except Fe and Zn contents in both seasons, in addition protein and anti-radical power and total yield. Statistically, leaf nutrients uptake and tuberous root content were highly significant affected by DSM and CSP combination. Appling of phosphorus fertilizer with DSM2894 mixture was gave the best values as compared with phosphorus fertilizer or DSM2894, individually.

The feral mink population in Denmark consists of two groups of animals; mink born in the wild and mink that have recently escaped from farms. The aims of this study are; 1) to estimate the reproduction and mortality of wild-born and captive-born mink and 2) to estimate the age of mink based on the width of pulp cavity (% of tooth width) in the canine teeth. During 2018, 247 wild caught mink were sent for necropsy at the Danish National Veterinary Institute. Of these mink, 112 were determined as captive-born and 96 were determined wild-born. The mean litter size ± SE of wild-born females was 7.6 ± 0.9 (range: 5-11 kits) and for captive-born females 5.9 ± 0.9 (range: 1-10 kits). The best fitting regression line for mink age (in months) based on pulp width was y=0.42x2-11.52x+104.7, R² = 0.77, p< 0.0001. Individuals with a pulp cavity width <35% was found to be younger than one year. The turnover of mink caught in nature was estimated to 66% and the yearly mortality to 69%, therefore the population is slightly declining. In conclusion, a feral reproducing mink population in Denmark persists, besides the continues influx of captive-born mink escaped from farms.

Micellar Casein Concentrate (MCC) is manufactured from microfiltration (MF) of skim milk utilizing ceramic or polymeric membrane filtration. While ceramic filtration has higher efficiency, use of polymeric is cost effective and the process is familiar to several US dairy processors. The aim of the present study was to develop an optimized membrane filtration process to produce MCC using spiral wound polymeric membrane filtration (SW MF) system by systematic selection of transmembrane pressure (TMP) and level of diafiltration (DF). Using skim milk as feed material, preliminary lab-scale MF experiments were conducted using 0.5 µm polyvinylidene fluoride (PVDF) membrane. Three TMP (34.5, 62.1, and 103.4 kPa) and three levels of DF (70, 100, and 150%) along with a process without DF as control were used in the study. Effect of TMP and effectiveness of DF on flux rates, SP removal, casein to total protein (CN/TKN) ratio, casein to true protein (CN/TP) ratio, rejection of casein (rej CN) and SP (rej SP) were evaluated. At all TMP values used in the study, the overall flux (O Flux) increased with the level of DF. Highest O Flux of 30.77 liter per meter square per hour (LMH) was obtained with 34.5 kPa pressure and 150% DF. The impact of DF was more pronounced at lower pressures than at the higher pressures used in the study. With controlled DF, instantaneous flux was maintained within 80% of initial flux for the entire process run. For all the experiments, casein has a rejection of 0.97 to 1.0, while serum protein has the lowest rejection of 0.10 at 34.5 kPa pressure and 150% DF level. Use of 34.5 kPa and DF level of 150 % contributed to 81.45% SP removal, and casein to true protein ratio of 0.96. SP removal data from the lab-scale experiments were fitted into a mathematical model using DF and square of TMP as factors. The model predicts SP removal within 90-95% of actual SP removal got from the pilot plant experiments.

The substrate N1, N3, N5 -tris(2-hydroxyphenyl)benzene-1,3,5-tricarboxamide (Sensor A) was prepared in the reaction of 1,3,5-benzenetricarboxylic acid (trimesic acid) and o-aminophenol in ethanol. The prepared organic sensor fulfills the chemiluminescent requirements including luminophore, spacer, and suitable binding receptor that distress the probe's luminescent features, providing selective and sensitive detection of mercury and iron ions in aqueous solutions. The sensor selectively detects mercury and iron ions in a water matrix containing various metal ions including sodium, calcium, magnesium, zinc, and nickel. Strong and immediate binding was observed between mercury ions and the substrate at pH 7.0 with a binding affinity toward Hg (II) enhanced by nine folds higher than that observed for iron sensor binding affinity, which makes the substrate a distinctive luminescence sensor for mercury detection at ambient conditions. The sensor shows a linear response toward Hg (II) in the concentration range from 4.2 x 10-5 to 2.0 x 10-8 M with a limit of detection of 1.0 x 10-8 M. Further, Sensor A provides linear detection for iron ions in the range from 1.5 x 10-3 to 1.5 x 10-8 M. The measured adsorption capacity of Sensor A toward mercury ions ranged from 1.25 to 1.97 mg/g and the removal efficiency from water samples reached 98.8% at pH 7.0. The data demonstrate that Sensor A is an excellent probe for detecting and removing mercury ions from water bodies.

Since the 1980s, a growing interest in goat milk was noticed due to the nutritional values and health benefits of this milk, which resulted in increasing goat populations and milk production worldwide. This comprehensive review elaborates on goat milk composition compared to other types of milk. It is also an overview of goat milk production, properties, nourishment-value, applications in dairy products, and potential health benefits. Goat milk composition and its characteristics are slightly different from other types of milk and can be utilized to manufacture many dairy products. Fresh goat milk and goat milk products (e.g., yogurt and kefir were found to provide various potential health benefits, such as anti-inflammatory, prevent cardiovascular disease, anti-diabetic and antihypertensive, strengthen bones, boost immunity, and improve metabolism.

Flash flooding is one of the most devastating natural events that leads to enormous and recurring loss of life. Kuwait was subjected to severe rainstorms in the winter of 2018 and 2020 followed by an extreme violent flood that had not been known in Kuwait since 1976. It resulted in several geomorphological and environmental impacts in urban and desert areas. This produced some positive results, such as geomorphological activity in landforms, the flow of some valleys and the prosperity of wildlife in the Kuwaiti desert. Negative results included some problems in the metropolitan area and destruction of some road networks that intersect the main valleys, and which were not equipped with crossings for avoiding floods. There was also the emergence of some problems in the infrastructure. Study of flash floods requires the involvement of all scientific and executive bodies to avoid environmental risk. The study aims to: 1- Monitor geomorphological and environmental changes. 2- Assess the impact of floods in the urban areas and on infrastructure. 3- Modeling the impact. 4- Creating solutions and adaptions to the flash flood. The study uses several methods such as remote sensing (RS), geographic information systems (GIS), hydrologic modeling and fieldwork to evaluate the impact of flash flood hazards on the sustainable urban development of Kuwait state. This approach is rarely used in Kuwait. We propose a novel method that could help decision-makers and planners in determining inundated flood zones before planning future urban developments in Kuwait, and help them to manage flood water, by identifying the most appropriate places for storage to exploit water in agriculture and drinking.

Abstract: The morphological characteristics of the tongue of the Rahmani sheep (Ovis aries) were described using gross inspection, morphometry analysis, and scanning electron microscopy. Nine mature male sheep heads were slaughtered, and samples were taken right away. The tongue was dissected, and various samples were obtained for SEM. The tongue had two different types of lingual papillae: mechanical (filiform, conical, and lenticular papillae) and gustatory (fungiform and vallate papillae). The main papillae and several secondary and tertiary papillae combine to produce each filiform papilla. On the dorsal surface of the tongue, there were five different types of conical papillae dispersed throughout, as well as three huge conical papillae and various-sized flattening papillae in front of the frenulum linguae. Furthermore, on the torus linguae, two different types of lenticular papillae were found. The majority of fungiform papillae possessed prominent taste buds' pores and were button-shaped with a central depression region, particularly in the rostral section of the tongue. On either side of the torus linguae, there are two rows of round, elliptical, pyramidal, and oval circumvallate papillae. Each papilla is surrounded by flat, broad, undulating annular rods and papillary grooves. The lingual surface also included numerous lin-gual gland openings in a variety of forms, which increased in number at the root. Finally, variations in the form, size, and number of lingual papillae, as well as the distribution of lingual gland openings along the lingual surface, may provide efficiency to the Rahmani sheep's tongue when feeding hard forages and high fiber foods.

In this paper, we present the idea of Self Supervised learning on the Shape Completion and Classification of point clouds. Most 3D shape completion pipelines utilize autoencoders to extract features from point clouds used in downstream tasks such as Classification, Segmentation, Detection, and other related applications. Our idea is to add Contrastive Learning into Auto-Encoders to learn both global and local feature representations of point clouds. We use a combination of Triplet Loss and Chamfer distance to learn global and local feature representations. To evaluate the performance of embeddings for Classification, we utilize the PointNet classifier. We also extend the number of classes to evaluate our model from 4 to 10 to show the generalization ability of learned features. Based on our results, embedding generated from the Contrastive autoencoder enhances Shape Completion and Classification performance from 84.2% to 84.9% of point clouds achieving the state-of-the-art results with 10 classes.

Despite of being an exceptionally biodiversity rich country, the forest coverage of Bangladesh is declining at an alarming rate. Declaration and management of protected areas in this regard is one of the efforts from government side to tackle the loss of biodiversity. The limited numbers of forest-protected areas (FPA), established to conserve the dwindling forest biodiversity of the country with high pressure on them for timber, non-timber forest products, and fuelwood - makes their management challenging. Moreover, most of the FPAs of the country declared only in the recent decades with very limited infrastructure, manpower and policy support for monitoring and governance. Some people-centred approaches for the management of FPAs and alternative livelihood and income generation subsidies although made available through a few project interventions, their number are still inadequate and performance remains less than satisfactory. This chapter provides a critical review of the FPAs of Bangladesh looking at their role in biodiversity conservation, management challenges, and key lessons from previous management interventions with recommendations for the future. It has been revealed that the FPA system of Bangladesh still poorly represents the diverse forest ecosystems with relatively small forest size and lack of corridors for the movement of wildlife. There are ample opportunities to render co-management of FPAs an effective strategy to minimize the conflicts in FPAs management in the country. It is, however, important to ensure the access of local forest-dependent people to different alternative income generating options that may adequately support their livelihoods.

Diabetes mellitus (DM) is one of the most dangerous metabolic diseases with high rate of mortality worldwide. It is well known that insulin resistance and deficiency in insulin production from pancreatic β-cells are the main characteristic of DM. Due to the detrimental side effects of the current treatment, there is a considerable need to develop new effective antidiabetic drugs, especially alpha-glucosidase and alpha-amylase inhibitors with lesser adverse effects. These inhibitors are known to be directly involved in the delay of carbohydrate digestion, resulting in a reduction of glucose absorption rate and consequently reduce the post-prandial raise of plasma glucose, which can reduce the risk of long-term diabetes complications. Hence, natural products are well-known sources for the discovery of new scaffold for drugs discovery, including new antidiabetic drugs. The phytochemical investigation of Salvia aurita collected from Hogobach pass, Eastern Cape, South Africa (SA), yielded four known abietane diterpenes namely carnosol (1), rosmanol (2), 7-methoxyrosmanol (3), 12-methoxycarnosic acid (4) and one flavonoid named 4,7-dimethylapigenin (5). Structural characterization of these isolated compounds was conducted using 1 and 2D NMR, in comparison with reported spectroscopic data. These compounds are reported for the first time from S. aurita. The biological evaluation of the isolated compound against alpha-glucosidase exhibited strong inhibitory activities for 3 and 2 with IC50 values of 4.2 ± 0.7 and 16.4 ± 1.1 µg/mL respectively, while 4 and 1 demonstrated strong alpha-amylase inhibitory activity amongst the isolated compounds with IC50 of 16.2 ± 0.3 and 19.8 ± 1.4 µg/mL. Molecular docking analysis confirms strong inhibitory activity of 3 against alpha-glucosidase. Additionally, excellent antioxidant capacities were displayed by 2, 1 and 3 respectively as ORAC (25789.9 ± 10.5; 23961.8 ± 14.1; 23939.3 ± 2.4) µM TE/g; 1 and 2 as FRAP (3917.8 ± 2.1; 1522.3 ± 0.9) µM AAE/g; 5 and 2 as TEAC (3190.4 ± 2.8; 2055.0 ± 2.6) µM TE/g. The methanolic extract of S. aurita is a rich source of abietane diterpenes with excellent antioxidant and anti-diabetic activities that can be useful to modulate oxidative stress, and might possibly be excellent candidates for the management of diabetes. This is the first scientific report on the phytochemical isolation and biological evaluation of alpha-glucosidase and alpha-amylase inhibitory activities of Salvia aurita.

Fertility preservation technologies have existed for decades, and the field is rapidly advancing; limited data exist regarding the use of these technologies by transgender patients. Many options are available for transgender patients who wish to preserve fertility before transitioning. These options include the cryopreservation of gametes, ovarian tissue, or embryos. Currently, ejaculated, or testicular sperm, immature oocytes, and ovarian tissue can be preserved for later use, but no such use option exists for immature testicular tissue. Many financial, sociological, and legal barriers and a lack of awareness among physicians and patients also hindered the utilization of these fertility preservation services. While options are abundant, usage rates are relatively low. The initial data regarding the successful use of preserved tissues appears promising, with birth rates not dissimilar to non-transgender patients. Further investigations into this area are needed. In addition, counseling regarding fertility preservation options should become a significant part of the provider-patient conversation before transitioning therapies.; fertility; transgender; reproductive technology.

A total of 473 metabolites were identified from 4 sour cherry genotypes using UPLC-TOF-MS. Untargeted metabolomics revealed the dominant chemical groups present in sour cherries. PCA showed that the diversity in sour-cherry metabolites was due to the genotype differences indicating iditol, malic acid, chlorobenzene, 2-mercaptobenzothiazole, and pyroglutamic acid as the predominant contributors. The variable importance in the projection (VIP > 1.0) in partial least-squares–discriminant analysis described 20 biomarker metabolites, representing the cherry metabolome profiles. A heatmap of Pearson’s correlation analysis between the 20 biomarker metabolites and antioxidant activities identified seven antioxidant determinants that displayed the highest correlations with different types of antioxidant activities. This study of correlating metabolomics and antioxidant activities elucidated that the higher nutritional value and biological functions of select sour cherry genotypes can be useful for the development of nutraceutical and functional foods.

Background: Papillomaviruses (PVs) are double-stranded DNA viruses and are more common in skin of ruminants in Iraq. A P53 (tumor suppressor protein) reveals an essential role in cell cycle control. This study aimed to describe the clinical, histopathological and immunohistochemical aspects of naturally occurring cutaneous ruminant’s papillomatosis. Methods: Samples were collected from totally, 10 animals (3 cattle, 3 goats and 4 sheep) with multiple papillomatosis lesions. Results: Clinically, exophytic multiple, cauliflower-like growths (warts) of varying sizes (0.5-11 cm) were found in different areas of the animal’s bodies. Histopathological features were various degrees of koilocytosis, ortho and parakeratotic, hyperkeratosis, hypergranulosis in granular layer and acanthosis. Immunohistochemical (IHC) investigations revealed some nuclei in the granular and basal layers of the epidermis with intense positivity for papillomavirus antigen. All tumor samples were positive for p53 expression that appeared as a strong cytoplasmic and perinuclear staining mainly in the basal and parabasal layers. Conclusion: this study described the papillomavirus lesions in bovine, ovine and caprine, that located in different anatomical areas with minor variations in histopathological features. The tumor samples showed positive results for PV antigen and P53 expression that considered as the useful markers in the diagnosis of cutaneous papilloma.

Hadhramout Initiative Against Corona (HIAC ) formed a working group of clinicians relevant to the management of COVID-19 to formulate clinical practice guidelines (CPG) for clinicians caring for the patients infected with COVID-19 in Yemen. The regional guidelines on the management of COVID-19 were thoroughly reviewed and its applicability was assessed for Yemen. HIAC’s recommendations covered (2) sections: the first one is the diagnosis, including case definition, risk stratification of the affected cases, investigations (prioritization of reverse transcription-polymerase chain reaction (RT-PCR) testing, D-dimer, chest x-ray, and chest computed tomography, while the second part covers the treatments (mainly Favipiravir, Remdesivir, Hydroxychloroquine, and Glucocorticoid, Anticoagulants, and Supportive measures). In conclusion, the adoption of cost-effective and evidence-based guidelines in Yemen will standardize the management of the patients infected with COVID-19 and protect both the patients and the health care workers from malpractice.

The work reports a facile synthesis of high thermally-stable nanocrystalline anatase TiO2 nanoparticles (NPs) doped with different atomic concentrations (0.5, 1.0, 3.0, and 6.0%) of Gd3+ and Nd3+ ions by a template-free and one-step solvothermal process, using titanium(IV) butoxide as titanium precursor and dimethyl sulfoxide (DMSO) as solvent. The structure and morphology of the Gd3+, Nd3+, and 0.5%Gd3+-0.5%Nd3+/doped TiO2 NPs have been characterized by using various analytical techniques. The Gd3+/ and Nd3+/TiO2 molar ratios were found to have a pronounced impact on the crystalline structure, size, and morphology of TiO2 NPs. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) studies revealed the proper substitution of Ti4+ by Gd3+ and Nd3+ ions in the TiO2 host lattice. The as-prepared Gdx/TiO2, Ndx/TiO2, and Gd1.0/Ndx/TiO2 bimetallic NPs, x = 0.5, 1.0, 3.0, and 6%, have been investigated as electrocatalysts for hydrogen evolution reaction (HER) in 1.0 M KOH solution using a variety of electrochemical techniques. At any doping percentage, the Gd1.0/Ndx/TiO2 bimetallic NPs showed higher HER catalytic performance than their corresponding counterparts i.e. Gdx/TiO2 and Ndx/TiO2. Upon increasing the Nd content from 0.5 to 6.0%, the HER catalytic performance of the Gd1.0/Ndx/TiO2 bimetallic NPs was generally enhanced. Among the studied materials, the bimetallic Gd1.0/Nd6.0/TiO2 NPs emerged as the most promising catalyst with an onset potential of -22 mV vs. RHE, a Tafel slope of 109 mV dec-1, and an exchange current density of 0.72 mA cm-2. Such HER electrochemical kinetic parameters are close to those recorded by the commercial Pt/C (onset potential: -15 mV, Tafel slope: 106 mV dec-1, and exchange current density: 0.80 mA cm-2), and also comparable with those measured by the most active electrocatalysts reported in the literature. The synergistic interaction of Gd and Nd is thought to be the major cause of the bimetallic catalyst's activity.

High-grade gliomas are the most common and aggressive adult primary brain tumors with a median survival of only 12-15 months. Current standard therapy consists of maximal safe surgical resection followed by DNA-damaging agents, such as irradiation and chemotherapy that can delay but not prevent inevitable recurrence. Some have interpreted glioma recurrence as evidence of glioma stem cells which persist in a relatively quiescent state after irradiation and chemotherapy, before the ultimate cell cycle re-entry and glioma recurrence. Conversely, latent cancer cells with a therapy-induced senescent phenotype have been shown to escape senescence, giving rise to more aggressive stem-like tumor cells than those present in the original tumor. Therefore, approaches are needed to either eliminate or keep these glioma-initiating cells in a senescent state for a longer time to prolong survival. In our current study, we demonstrate that the radiation-induced cell cycle inhibitor P21 can provide a powerful route to induce cell death in short-term explants of PDXs derived from three molecularly diverse human gliomas. Additionally, cells not killed by P21 overexpression were maintained in a stable senescent state for longer than control cells. Collectively, these data suggest that P21 activation may provide an attractive therapeutic target to improve therapeutic outcomes.

Three-dimensional (3D) facies and petrophysical models were generated from previously published data of carbonate strata in the Dam Formation (eastern Saudi Arabia) to quantitatively investigate, describe, understand, model, and predict the permeability anisotropy of tidal flat carbonate within a sequence stratigraphic framework. The resulting 3D models were used to conduct fluid flow simulations to demonstrate how permeability anisotropy influences the production of hydrocarbons and ultimately affects decisions concerning future drilling in the exploration and development of carbonate reservoirs that have tidal flat strata. The constructed 3D facies model consists of four lithofacies associations, two of which were grain-dominated associations and two of which were mud-dominated associations. These lithofacies associations varied spatially in four reservoir zones (zones 1 to 4), which represent two fourth-order sequences in the uppermost part of the Dam Formation. Zones 1 and 3 consist of transgressive parasequences, and zones 2 and 4 consist of the regressive parasequences of these sequences. The 3D porosity and permeability models have a coherent match with the distribution of the lithofacies and the stratigraphic framework of the Dam Formation. The results suggested that the permeability anisotropy in zones 1 and 3 is controlled by the occurrence of the grain-dominated lithofacies associated with tidal flat channels. This lithofacies association overlies the sequence boundaries of sequences 1 and 3, forms reservoir bodies with relatively high permeability values, and is elongated perpendicular to the shoreline of the depositional environments. In contrast, permeability anisotropy in zones 2 and 4 is thought to be controlled by the occurrence of the grain-dominated lithofacies associated with the oolitic shoal. This lithofacies association overlies the maximum flooding surface of sequences 2 and 4, forms reservoir bodies with relatively high permeability values, and is elongated parallel to the shoreline of the depositional environments. Fluid flow simulation results suggested that the trend in hydrocarbon production from the constructed 3D models depends on permeability anisotropy in each reservoir zone. Thus, recognizing trends in permeability anisotropy, which might be predicted using sequences stratigraphy, could help to identify potential areas for future drilling.

Although carbon (C) efflux from soils treated with organic wastes was widely covered in temperate and cold regions, still such data is not sufficient from arid and semi-arid regions. Saudi Arabia produces more than 335,000 tons/year of cow manure (CM), this CM either left as raw manure or being composted. The application of high C/N amendments is expected to increase soil organic carbon and reduce CO₂ fluxes. A 90-day incubation experiment was conducted to study CO₂ efflux, organic C microbial biomass C, available NH₄+and NO₃-when added to agricultural soil. Six manure types were added: cow manure, cow manure compost, cow manure biochar, cow manure stripped ammonia at pH 12 with a temperature of 95oC, cow manure stripped ammonia at pH 9 with a temperature of 95oC and control. The application of CM resulted in a considerable increase in soil available nitrogen, CO₂ efflux compared to other treatments. Cow manure biochar showed the lowest CO₂ efflux. Cumulative CO₂ effluxes of cow manure effluents were lower than CM this possibly due to the relatively high C:N ratio of manure effluent. The content of, P, Fe, Cu, Zn and Mn were decreased as incubation time increased. microbial biomass C of cow manure stripped ammonia at pH 12 with a temperature of 95oC were increased at 7 and 60 days illustrating to temperature effect on the decomposing of manure materials.

The paper demonstrates the analysis of Corona Virus Disease based on a probabilistic model. It involves a technique for classification and prediction by recognizing typical and diagnostically most important CT images features relating to Corona Virus. The main contributions of the research include predicting the probability of recurrences in no recurrence (first time detection) cases at applying our proposed approach for feature extraction. The combination of the conventional statistical and machine learning tools is applied for feature extraction from CT images through four images filters in combination with proposed composite hybrid feature extraction (CHFS). The selected features were classified by the stack hybrid classification system(SHC). Experimental study with real data demonstrates the feasibility and potential of the proposed approach for the said cause.

Reaction of 2-mercapto-3-phenylquinazolin-4(3H)-one (MPQ) with both 4-vinyl benzyl chloride and allyl bromide furnished the reactive heterocyclic monomers 3-phenyl-2-((4-vinylbenzyl) thio) quinazolin-4(3H)-one (PVTQ) and 2-(allylthio)-3-phenylquinazolin-4(3H)-one (APQ), respectively. Copolymerization of PVTQ monomer with styrene and methyl methacrylate in the presence of 2,2′-azobisisobutyronitrile (AIBN) afforded the copolymers PS-co-PPVTQ and PMMA-co-PPVTQ, respectively. Similarly, copolymerization of monomer APQ with styrene and methyl methacrylate (MMA) afforded the copolymers PS-co-PAPQ and PMMA-co-PAPQ, respectively. The resulted copolymers were characterized by using FT-IR, 1H-NMR and GPC techniques. Silver nanocomposites of PS, PMMA, PS-co-PPVTQ, PMMA-co-PPVTQ, PS-co-PAPQ and PMMA-co-PAPQ were synthesized by the addition of silver nitrate into the polymer solution. The reduction of silver ions into silver nanoparticles was performed in DMF and water. Thermogravimetric (TGA) analysis was used to determine the thermal stability of the copolymers and their silver nanocomposites. The X-ray diffraction (XRD) analysis indicated the amorphous structures of the co-polymers and confirmed the formation of silver nanoparticles. The antitumor and antibacterial activities were screened for the copolymers and enhanced by the formation of their silver nanocomposites. In vivo antitumor activity in Ehrlich Ascitic Carcinoma (EAC) mice model showed that PS-co-PPVTQ/Ag NPs, PMMA-co-PPVTQ/Ag NPs, and PMMA-co-PAPQ/Ag NPs displayed promising inhibitory effects against EAC and induce apoptosis against MCF-7 cells.

Chenodeoxycholic acid (CA) is a naturally occurring bile acid that is produced in the liver from cholesterol. Three CA complexes using Zn(II), Mg(II), and Ca(II) ions were synthesized to examine the chelation tendencies of CA towards these metal ions. The complexation reaction of CA with the metal ions under investigation was conducted with a 1:1 molar ratio (CA to metal) at 60-70°C in natural media (pH 7-8), which consisted of a binary solvent of MeOH and H2O (1:1). The resulting CA complexes were characterized using analytical data (metal, H, C, and Cl, analysis) and spectral data (UV-visible, FT-IR, and 1H NMR) to elucidate the complexes’ structures. The results suggested that CA in anion form utilized oxygen atoms of the carboxylate group (-COO−) to capture Zn(II), Mg(II), and Ca(II) ions. This produced complexes with the general compositions of [Zn(CA)(H2O)Cl], [Mg(CA)(H2O)Cl]H2O, and [Ca(CA)(H2O)Cl]2H2O, respectively. The Kirby-Bauer disc diffusion assay was then used to explore the bioactivity of the CA complexes toward three fungal species, three Gram-positive bacteria, and two Gram-negative bacteria. The Ca(II) and Mg(II) complexes exhibited marked inhibitory effects on the cell growth of the fungal species Aspergillus niger with potency equal to 127% and 116% of the activity of the positive control, respectively. The Zn(II) and Ca(II) complexes strongly inhibited the growth of Penicillium sp., while the Zn(II) and Mg(II) complexes showed strong growth inhibition towards the Gram-negative species Pseudomonas aeruginosa.

Aim: In individuals with COVID-19, the study assessed the relationship between cytokine expression and pulmonary dysfunction. These correlations may help to suggest strategies for prevention and therapies of coronavirus disease outbreak. Patients and methods: 50 healthy participants and 100 COVID-19 patients participated in this study. COVID-19 participants were subdivided into moderate and severe groups based on the severity of their symptoms. In both patients and controls, measurements of white blood cells (WBCs), lymphocytes, C-reactive protein (CRP), interleukin (IL)-1, IL-4, IL-6, IL-18, and IL-35 were estimated. All the patients performed chest CT and CO-RADS score was assessed. Results: All patients had increased WBCs count and CRP, IL-1, IL-4, IL-6, IL-18, and IL-35 levels than healthy controls. While WBCs, CRP, and cytokines like IL-1β and IL-6 showed significantly higher levels in the severe group as compared to moderate patients, IL-4, IL-35, and IL-18 showed comparable levels in both disease groups. Furthermore, CO-RADS score was positively connected with WBCs, CRP, and cytokine levels (IL-35, IL-18, IL-6, IL-4 and IL-1β) in both groups, and lymphocyte levels in all patient groups considerably decreased as compared to the controls. CO-RADS score, also demonstrated a positive correlation with lymphocytes in the moderate COVID-19 patients, whereas in the severe patients, it demonstrated a negative correlation with lymphocytes. Conclusion: Severe COVID-19 patients, compared to individuals with moderate illness and healthy controls, patients had lower lymphocyte counts and increased CRP with greater WBCs counts. In contrast to moderate COVID-19 patients, severe COVID-19 patients had higher levels of IL-1β and IL-6, but IL-4, IL-18, and IL-35 between both illness categories at close levels. CO-RADS 5 was the most frequent category in both moderate and severe cases. Patients with a typical CO-RADS involvement had a higher CRP and white blood cell count with a lower lymphocyte count than the others. Cytokine levels were considered a surrogate markers of severe lung affection in COVID 19 patients.

This study aims to theoretically address the design and analysis of an efficient pressure sensor designed by using a polymer-based defective 1D annular photonic crystal (APC). The 1D APC comprises an alternate arrangement of Si and SiO2 in a cylindrical fashion, incorporating a central defect layer. The investigation of the reflectance characteristics of the proposed structure is conducted by separately considering the polystyrene (PS) and the polymethyl methacrylate (PMMA) polymer materials as the defect layer. The pressure-sensitive refractive index of the polymers and the constituent materials of the APC plays a vital role in envisaging the pressure-sensing application. The cornerstone of this study is represented by the shift analysis in the wavelength of the defect mode inside the band gap using different applied pressures by employing the modified transfer matrix method (MTMM). Various geometrical parameters like the defect polymer layer’s thickness and the APC period were carefully optimized to achieve higher sensing performance. The proposed design demonstrated a remarkable pressure sensitivity and FoM of 51.29 nm/GPa and 301.7 GPa-1, respectively, which is considerably high in the current research scenario. It is believed that the proposed structure can be an apt candidate as an innovative high-performance pressure sensor, and it can play a key role in photonic integrated circuits.

Lomefloxacin (F1) and pefloxacin (F2) have a broad spectrum of antimicrobial activities against Gram-positive and Gram-negative bacteria. In this study, we investigated the complexation mode, morphological and biological properties of four metal-based complexes of F1 and F2 molecules with Mg(II), Ca(II), Zn(II), and Fe(III) metal ions. These complexes were prepared at ~60–70°C in a neutral medium using a 5% NH3 solution at pH ~7-8 with a 1:1 ratio. Multiple physicochemical methods were employed to characterize the binding mode between F1 and F2 with the metal ions under investigation. The results of these methods suggested that the gross formula of the complexes obtained with the metal ions were [MgF1(H2O)Cl]2H2O, [CaF1(H2O)Cl]3H2O, [ZnF1(H2O)Cl], [FeF1(H2O)2Cl2]Cl2H2O, [MgF2(H2O)Cl]2H2O, [CaF2(H2O)Cl]3H2O, [ZnF2(H2O)Cl], and [FeF2(H2O)2Cl2]Cl2H2O. The microscopic characterizations indicated that the Ca(II)-F1 complex had an interesting surface topography. Its particles had a homogenous, short, rod-like shaped structure that clustered together to form a tree shape. Using the Kirby-Bauer disc diffusion protocol, the synthesized metal-based complexes were screened in vitro against different Gram-positive and Gram-negative bacterial and fungal species. The antimicrobial profile of the Fe(III)-F1 complex indicated that it had remarkable inhibitory activity against all the tested bacterial and fungal species with potency equal to that of the standard drugs (streptomycin and ketoconazole).

BACKGROUND: Knee osteoarthritis (OA) commonly causes increase in the patients’ disability and reduce their function because it causes pain, limitation in knee range of motion and decrease in muscle power.AIM: This study investigated the effect of three different physical therapy programs on knee range of motion , pain level, muscle strength and functional condition in patients with knee OA. DESIGN: Randomized comparative study.SETTING: Outpatient Rehabilitation clinic of Tongji Hospital (Wuhan, China).POPULATION: Seventy-two patients of Knee OA (aged 40-70) enrolled and randomly allocated into three groups. Group A (n=24) received physical agents and isometric quadriceps exercises, group B (n=24) received same physical agents as group A in addition to open kinetic chain exercises and group C (n=24) received physical agents as group A in addition to closed kinetic chain exercises.METHODS: knee range of motion (by electro goniometer), knee pain level (by VAS), quadriceps muscle strength (by isokinetic dynamometer) and functional condition (by WOMAC) were assessed before and after 5 weeks of treatment.RESULTS: In between group analysis, there were significant differences (P<0.05) between the three groups for all outcome measure. In within-group analysis, group C was the only group that showed significant differences (P<0.05) in all the outcomes. Group A and B showed significant differences (P<0.05) in quadriceps muscle strength and knee pain and no significant differences (P>0.05) in knee ROM and functional condition.CONCLUSIONS: After the study, our solid conclusion is that in physical therapy programs or protocols, closed kinematic chain exercise is very effective, it improves knee ROM, and help in reducing knee pain, muscle strength, function and disability for patients with knee osteoarthritis.CLINICAL REHABILITATION IMPACT: Comparison between different physical therapy programs provides the rehabilitation team with the best treatment intervention that is more effective in treating the problems associated with knee osteoarthritis.

At secondary healthcare, Carbapenem-Resistant Enterobacterales (CREs) such as observed in Klebsiella pneumoniae are a global public health priority with significant clinical outcomes. In this study, we describe clinical, phenotypic, and genotypic characteristics of three pan-drug resistant (PDR) isolates that demonstrated extended resistance to conventional and novel antimicrobials. All patients had risk factors for acquisition of multidrug resistant organisms while microbiological susceptibility testing showed resistance to all conventional antimicrobials. Advanced susceptibility testing demonstrated resistance to broad agents such as ceftazidime-avibactam, ceftolozane-tazobactam, and meropenem-vaborbactam. Nevertheless, all isolates were susceptible to cefiderocol, one of the novel antimicrobials that demonstrated potent in vitro activity against resistant Gram-negative bacteria including CREs pointing towards potential therapeutic role for PDR pathogens. Expanded genomic studies revealed multiple antimicrobial resistant genes (ARGs), including blaNMD-5 and blaOXA derivative types as well as a mutated outer membrane porin protein (OmpK37).

The chemical reaction between the quinolone antibiotic oxolinic acid (OA) and Fe(III), Zn(II), Ca(II), and Mg(II) ions results in the formation of metal-based complexes with the following formulas: [Fe(OA)(H2O)2Cl2]2H2O, [Zn(OA)(H2O)Cl]2H2O, [Ca(OA)(H2O)Cl], and [Mg(OA)(H2O)Cl]. We used analytical (C, N, H, Cl, metal analysis) and spectral (FT-IR, 1H NMR, UV-visible) data to structurally characterize the synthesized metal-based complexes of the OA molecule. We found that the OA molecule utilizes the two oxygen atoms of the carboxylate group and the pyridone C=O group to bind the investigated metal ions. The morphological properties of the synthesized OA complexes were assessed using X-ray powder diffractometry (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The biological properties, specifically antibacterial and antifungal activity, of the synthesized complexes were evaluated in vitro using the Kirby-Bauer disc diffusion protocol with five bacterial and three fungal strains. The complex containing Ca(II) ions exhibited remarkable antibacterial and antifungal activity against all tested microbial strains, surpassing or equaling the potency of the standard drugs (streptomycin for antibacterial assays and ketoconazole for antifungal assays).

A flat-plate unglazed solar water heater (SWH) with polymer thermal absorber was developed and tested. Polymer thermal absorber as a viable alternative to metal thermal absorber that is found in most SWH systems. The performance of this polymer SWH system is measured based on inlet and outlet water temperature, water flowrate, ambient air temperature and solar irradiance. The polymer thermal absorbers are hollow Polyvinyl Chloride (PVC) pipes with 20mm external diameter and 3 mm thick, painted in black to enhance radiation absorption. The pipes are arranged in a rectangular spiral inward-outward opposing-flow (RSioof). The collector pipes are placed in a 1 m2 square enclosure with bottom insulation and reflective surface for better radiation capture. Water circulation is a closed loop with a 16-liter uninsulated storage tank, driven by a pump and controlled by valves to maintain a mass flow rate of 0.00031 to 0.00034 kg/s. The test was conducted under partially clouded sky from 9 am to 5 pm, with solar irradiance between 105 and 1003 W/m2 and 27-36oC ambient air temperature. The SHW produced outlet hot water at 65oC by mid-day and maintained the storage temperature at 63oC until the end of test duration. Photo-thermal energy conversion was recorded with 23% maximum value. Results indicate that a flat plate solar water heater with polymer thermal absorber in RSioof design can be an effective alternative to the metal thermal absorber solar water heater and can be further optimized with glazing and tube sizing.

Introduction: COVID-19's emergence caused devastating consequences worldwide, with high morbidity and mortality rates. Critically ill patients face challenges like acute respiratory failure requiring intensive measures, including mechanical ventilation. Mortality rates in ARDS are influenced by various factors. This paper focuses on describing characteristics, management, and survival factors of mechanically ventilated ICU patients in Saudi Arabia. Methods: a retrospective, noninterventional approach, we reviewed charts and data of all COVID-19-infected patients who were admitted to the ICU, particularly those requiring ventilation support at Aseer Central Hospital (ACH) in the southern region of Saudi Arabia. Results: The study enrolled 594 COVID patients, mean age 60.5 ± 17.3 years, with 67% males. Approximately half had O negative blood group. Common chronic health issues: diabetes mellitus (35.5%). Positive culture findings in almost 340 (57.2%), with Klebsiella pneumoniae being the most isolated microorganism (45.5%). Significant correlations found with mortality: age, blood culture, Rh positive group (P<0.05). Conclusion: this study provides critical insights into the clinical and epidemiological aspects of COVID-19 patients admitted to the ICU in a Saudi Arabian hospital. The research underscores the impact of age, comorbidities, laboratory markers, and treatment interventions on patient out-comes, emphasizing the significance of tailored management strategies in this context.

Punica granatum (PG) or Pomegranate is a bush, having many trunks and often get taller 1.8 to 4.7m long and their leaves are shiny and fleshy, approximately 7 to 8cm in length. Traditionally, it is used in diarrhea and dysentery due to its strong constricting property. Punica Granatum covering used in dysentery, diarrhea, piles, bronchitis. It is also used to minimize the risk of heart disease. The peel extract of Punica Granatum contain methanol and their dried peels has antidiarrheal venture, also help in wound healing activity. Peels of the pomegranate also holds around 60% of the fruit and they contain different types of ingredients including ellagitannins and proanthocyanidin compounds and minerals such as calcium, phosphorus, magnesium, potassium, flavonoids and sodium. Some animals were found in different local areas with both acute and chronic diarrhea. The condition of these animals were quite miserable because of dehydration and loss of electrolytes in the body cells of the animals. They were unable to move due to seriousness of the disease. 8 grams of PG Peel Powder mixed with 1 liter of water, 2 g of PG Peel Powder mixed with 250 ml water and 8 g of PG Peel Powder mixed with 1 liter of water were administrated orally by using sterilized bottles to the selected three cases. 3 days after the administration of different doses, all cases of diarrheal animals show a significant recovery. The condition of the animals seem to be healthier. Before administration of the pomegranate peel powder extract, all three cases had weak body structure due to diarrhea. Watery stool that may be yellow in color and mucus was also evident in the stool, due to this reason the patient calf was weak and depressed. In sometimes they also show unconsciousness and blood glucose levels seem to be reduced from the normal level.

The increase in incidence of superficial fungal infections combined with the emergence of antifungal resistance represents both a global health challenge and a considerable economic burden. Recently, dermatophytes, the main culprit causing superficial fungal infections, have started to exhibit antifungal resistance. This can be observed in some of the most common species such as Trichophyton rubrum and Trichophyton mentagrophytes. Importantly, the new subspecies, known as Trichophyton indotineae, has been reported to show high resistance to terbinafine, a first-line treatment for dermatophyte infections. Compounding these issues is the realization that diagnosing the causative infectious agents requires using molecular analysis that goes beyond the conventional macroscopic and microscopic methods. These findings emphasize the importance of conducting antifungal susceptibility testing to select the appropriate antifungal necessary for successful treatment. Implementing these changes may improve clinical practices that combat resistant dermatophyte infections.

Establishment of protected areas (PAs) is one of the key global conservation strategies that currently cover approximately 15% of the earth’s land surface. Globally, PA networks are designed to curb the growing anthropogenic pressures in areas with high biological diversity. Despite the importance of PAs in conserving the vanishing biodiversity and unique habitats, many of them are in critical condition due to poor governance thus functioning below the expected level. Moreover, in many developing countries, the PA coverage is below the global standard. Recognizing their contemporary role in conservation, governments have recently agreed to expand the global PA coverage to 17% by the year 2020 (Aichi target 11). This book with eight chapters from different regions of the world provides an overview of the PAs governance, institutional mechanisms, conservation benefits, limitations and challenges associated with their respective policy discourse, integrated management, and functional attributes. Protected areas expect to to play an important role in the long rn in conservation and protection of biodiversity and ecosystems particularly in countries where population pressure and habitat loss are high. Regular intervention, political commitment, and effective governance are essential for the sustainability of PAs across the world. Here, we also attempted to shed some light on future development clues for the sustainable management and monitoring of PAs worldwide.

The paper draws attention and opens the debate on major societal issues that concern not only Muslims but human societies, at large, because of their profound implications, afflictions, and their present and future transitive dimensions. The paper discusses two major issues that have attracted a great deal of attention in the recent past: wealth and income disparities, and global indebtedness. Four remedies have stressed upon and/or proposed to eradicate and/or lessen some of the burdens of these problems have been thoroughly examined. These are: - Stripping commercial banks of their power to create money out of thin air (i.e., Ex Nihilo). Thus, reviving financial reform in line with the spirit of the call for the “Establishment of a National Bank [in England]” in the 1820s by the renowned British economist David Ricardo (1772-1823). The Bank of England was a private commercial entity at that time. - Prohibiting of ‘harmful’ speculation activities in financial and economic transactions and/or imposing hefty taxes on transactions relating to such activities. The implementation of such a policy requires and clear-cut distinction between the ‘harmful’ and ‘non-harmful’ speculative activities in financial and non-financial markets. - Levying adequate and fair taxes on the wealthiest upper class at the global scene. Calls for such a policy is on rise in the past few years. For instance, “Speakers at the European Development Days summit in Brussels, [in 2017], said that a just tax system should be “at the heart” of the development debate, and that more transparency is needed to ensure that companies pay their fair share. Tax avoidance schemes used by multinational companies, such as moving profits to tax havens, result in global losses of around $650 billion a year in tax receipts — with developing countries losing $200 billion, according to a study from the International Monetary Fund”, (Edwards, 2017; Crivello et al., 2015, p. 21) - Establishing a neutral legislative and tax regimes for different modes of financing. Thus, providing ‘a level playing field’ for equity and debt modes of financing due to the current biasness of the tax regimes to debt-based financing instruments as it has been documented in various studies carried out by the IMF, the European Commission, and other international prominent bodies.

The main objective of the paper is to provide a thorough analysis of currently used modulation control schemes for single phase bidirectional dual active bridge DC/DC converter. In this article, it will be shown that single phase shift, extended phase shift and Dual phase shift modulation schemes are special cases of triple phase shift (TPS) modulation scheme. The article aims to highlight six TPS switching modes and their complements with the operational constraints. Unlike previous studies that regarded TPS as a complex scheme, this paper simplifies the analysis of each mode and aims to standardize the understanding of TPS modulation in DAB converters. Power equations, range of power transferred and zero voltage switching (ZVS) are derived for all the modes under TPS without assuming fundamental component analysis. Additionally, a generic optimization algorithm is developed to show the advantages of TPS modulation and thus, detailed analysis presented in this paper provides valuable insights for single phase DAB converter designers in identifying a wide range of optimization algorithms to achieve higher efficiency under TPS modulation. This analysis contributes to the advancement of bidirectional DAB converter technology and facilitates its application in various power electronic systems.

Purpose: To compare the efficacy and safety of graft-free short tunnel small flap (STSF) technique with that of scleral patch graft (SPG) in Ahmed glaucoma valve (AGV) implantation. Design: Randomized clinical trial. Participants: Eighty-eyes of eighty patients with medically uncontrolled glaucoma including 41 in STSF and 39 eyes in SPG. Methods: Patients were enrolled and assigned randomly to STSF or SPG. Main Outcome Measures: tube exposure, Intraocular pressure (IOP), number of glaucoma medications, best corrected visual acuity (BCVA), surgical complications, and success rate ( defined as intraocular pressure (IOP) >5 mmHg, ≤21 mmHg, and IOP reduction ≥20% from baseline at two consecutive visits after three months, no reoperation for glaucoma). Results: only one case in SPG developed tube exposure at 1-year follow-up. The cumulative probability of success during the first year of follow-up was 70% in the STSF and 65% in SPG (P = 0.36). IOP decreased significantly from 29.6 ± 8.6 mmHg at baseline to 16.4 ± 3.6 mmHg at the final follow-up in STSF (p = 0.001). The corresponding numbers for SPG were 30.9 ± 11.2 and 15.8 ± 4.7, respectively (p = 0.001). The final IOP was comparable between both groups (p = 0.65). Mean ± standard deviation of the number of glaucoma medications was 1.8 ± 0.9 in STSF and 1.6 ± 0.9 in SPG at final follow-up (P = 0.32). Postoperative complications developed in 8 patients (19%) in STSF and 9 patients (23%) in SPG (P = 0.81). Conclusions: STSF and SPG techniques had comparable complication rate at one-year follow-up. Both techniques were comparable in terms of success rate, postoperative IOP, and glaucoma medications.

Worldwide, diarrhoea in children under-five years of age is the second leading cause of death. Despite having high morbidity and mortality, diarrhoeal diseases can be averted by simple and cost-effective interventions. The Integrated Management of Childhood Illness (IMCI) has proposed the use of Oral Rehydration Salt (ORS) and zinc together with adequate food and fluid intake for the management of acute non-dysenteric watery diarrhoea in children. In the past, few studies examined the determinants of adherence to diarrhoea case management. Therefore, this study measured the determinants of therapeutic and dietary adherence to diarrhoea case management using the third and fourth wave of Pakistan Demographics & Health Surveys (PDHS) datasets. Data from 4,068 children between 0 to 59.9 months with positive history of diarrhoea were included, while data on children with dysentery, severe dehydration, and co-morbid condition was excluded. This study reported therapeutic adherence in less than 10% of children in Pakistan, while dietary adherence was reported in 39.2% of children (37.7% in 2012-2013 ~ 40.7% in 2017-2018). A significant improvement in therapeutic (0.8% in 2012-2013 ~ 8.1% in 2017-2018) and dietary adherence (37.7% in 2012-2013 ~ 40.7% in 2017-2018) was reported in the 2017-2018 survey, compared to the 2012-2013 survey. In general, children over the age of one year (compared to children <1 year) and of the richer/richest socioeconomic class (compared to poorest/poorer socioeconomic class) have showed higher therapeutic and dietary adherence. Therapeutic and dietary adherence among diarrhoeal children can be improved by increasing the awareness and accessibility of ORS, zinc, and essential foods.

This study examines the relationship between entrepreneurship and sustainable devel-opment in Saudi Arabia from 2006 to 2022, focusing on the economic, social, and en-vironmental dimensions. Using the Autoregressive Distributed Lag (ARDL) model, the research investigates both short-run and long-run dynamics to understand how entre-preneurial activities influence sustainable development within the framework of Saudi Arabia's Vision 2030 initiative. The findings indicate that entrepreneurship significantly contributes to economic growth through job creation and innovation, thereby aiding in the diversification of the economy away from oil dependency. Socially, entrepreneurial ini-tiatives have a positive impact on gender equality and social inclusion by empowering women and integrating youth into the labour market. Environmentally, entrepreneurship helps reduce carbon emissions and promotes sustainable business practices. Despite these positive outcomes, challenges such as regulatory barriers, limited access to finance, and the need for a supportive entrepreneurial ecosystem remain. Recommendations include enhancing entrepreneurial education, providing financial incentives, and streamlining regulatory processes to better support start-ups and SMEs. The study highlights the ne-cessity of addressing these challenges to fully realize the potential of entrepreneurship for sustainable development in Saudi Arabia. By providing empirical evidence on the sig-nificant role of entrepreneurship in driving sustainable development, this research offers actionable insights for policymakers aiming to foster a more resilient and diversified economy in line with Vision 2030. .

Insulation systems for the floor, roof and external walls play a prominent role in providing a thermal barrier for the building envelope. Design decisions made for the insulation material type and thickness can alleviate potential impacts on the embodied energy and improve the building thermal performance. This design problem is often addressed using a BIM-integrated optimisation approach. However, one major weakness lies in the current studies is that BIM is merely used as the source for design parameters input. This study proposes a BIM-based envelope insulation optimisation design framework using a common software Revit to find the trade-off between the total embodied energy of the insulation system and the thermal performance of the envelope by considering the material type and thickness. In addition, the framework also permits data visualisation in a BIM environment, and subsequent material library mapping together with instantiating the optimal insulation designs. The framework is tested on a case study based in Sydney, Australia. By analysing sample designs from the Pareto front, it is found that slight improvement in the thermal performance (1.3399 to 1.2112 GJ/m2) would cause the embodied energy to increase by more than 50 times.

Windows account for a significant proportion of the total energy lost in buildings. The interaction of window type, Window-to-Wall Ratio (WWR) scheduled and window placement height would influence the natural lighting and heat transfer through windows. This is a pressing issue for non-tropical regions considering their high emissions and distinct climatic characteristics. A limitation exists in the adoption of common simulation-based optimisation approaches in the literature, which are hardly accessible to practitioners. This article develops a numerical-based window design optimisation model using a common Building Information Modelling (BIM) platform adopted throughout the industry, focusing on non-tropical regions of Australia. Three objective functions are proposed; the first objective is to maximize the available daylight, and the other two emphasize on the undesirable heat transfer through windows in summer and winter respectively. The developed model is tested on a case study located in Sydney, Australia, and a set of Pareto-optimum solutions is obtained. Through the use of the proposed model, energy savings of up to 16.43% are achieved. Key findings on the case example indicate that leveraging winter heat gain to reduce annual energy consumption should not be the top priority when designing windows for Sydney.

This study investigated the chemical composition, and total phenolic content(TPC), total flavonoid content (TFC), and antioxidant activity Reziz date pomace extracted using different solvent system. The recovery, bioaccessibility, and stability of bioactive compounds were evaluated using In vitro gastrointestinal digestion. The results showed that pomace rich source of fiber but low in fat, and protein. Extraction data revealed that methanol, and ethanol were the most effective solvent for TPC and TFC extraction with higher antioxidant activity. In vitro gastrointestinal digestibility significantly affected recovery, bio-accessibility and stability of bioactive compounds. The TPC, TFC, and antioxidant activities were significantly increased after the mouth digestion but decreased during the gastric and intestinal digestion. The bioaccessibility of polyphenol and flavonoid were 35.22% and 23.57% respectively after the intestinal digestion. The chyme insoluble fraction (pellet) showed higher bioactive compounds and antioxidant activity compared to the chyme soluble fraction. The high fiber content of the date pomace seemed to affect the bioaccessibility of the bioactive compounds. TPC or TFC and the antioxidant activity determined by DPPH and ABTS were found to have a positive correlation with the oral, gastric, and intestinal digestion. The GC-MS analysis of digested date pomace in mouth, gastric, or intestinal digestion revealed an increase in the number of peaks (compounds) compared to the undigested sample. According to these findings, Ruzeiz date pomace could be utilized as a bioactive ingredient source in formulation of functional foods to promote healthy life.

Antimicrobial resistance (AMR) poses a global public health threat, with rates directly linked with consumption. The World Health Organization (WHO) AWaRе-classification aims to guide antibiotic use, which is influenced by drug availability, affordability, and economic policies. In Jordan, a high proportion of consumed antibiotics belong to the 'Watch' category. Data from the WHO-AWaRе classification, the Essential Medicines List, and the Jordan Food and Drug Administration were analyzed. Antibiotics for adults were classified and their cost per Defined Daily Dose (DDD) was determined, then affordability was assessed. In 2023, 43 injectable and 43 oral antibiotics for adults were registered in Jordan. 'Watch' antibiotics were the most common. 'Access' antibiotics had the lowest cost/DDD. 'Rеsеrvе' antibiotics were the most expensive with few generics. Injectable antibiotics had a negative correlation between cost and the number of alternatives. Affordability was higher for oral antibiotics compared to injectable ones. 'Rеsеrvе' antibiotics were generally unaffordable. This study highlights the need to promote 'Access' antibiotics over other categories by encouraging registration of missing ‘Access’ antibiotics and adjusting 'Watch' and 'Rеsеrvе' antibiotic prices. Competition among generics can lead to lower prices, increasing affordability and accessibility. We emphasize the importance of the AWaRе-classification in guiding antibiotic use in Jordan.

A theoretical nonlocal thermoelastic model for studying the effects of the thermal conductivity variability on a rotating nanobeam has been described in the present article. The theory of thermal stress is employed using the Euler–Bernoulli beam model and generalized heat conduction with phase lags. It is believed that the thermal conductivity of the current model varies linearly according to temperature. Due to variable harmonic heat, the considered nanobeam excited and was subjected to a time-varying exponential decay load. Using the Laplace transform process, the analytical solutions for displacement, deflection, thermodynamic temperature and bending moment of rotating nanobeams are provided in final forms and a numerical example has been taken to address the problem. A comparison of the stated results was displayed and additionally, the influences of non-local parameters and varying load were analyzed and examined. We also investigate how the linear changes in the temperature of physical properties can influence both the static and dynamic responses to the rotating nanobeam.

In this paper, we study the convergence of new implicit iterations dealing with n-tupled fixed point results for nonlinear contractive-like mappings on W-hyperbolic metric spaces. Herein, we demonstrate that our newly implicit iteration schemes have faster rate of convergence than implicit S-iteration process, implicit Ishikawa and Mann type iteration processes. Furthermore, a numerical simulation to improve our theoretical results is obtained.

Hydrodynamic resistance is a critical parameter in microfluidics, affecting device functionality and performance. However, quantifying hydrodynamic resistance in microfluidics is a challenge due to many influencing factors and the difficulties associated with the precise measurements of low flow rates (< 10 L/min) and pressure drops (< 5 kPa). This article presents a simple experimental test method for assessing hydrodynamic resistance, correlating with theoretical and numerical calculations. The results demonstrate good agreement between benchtop and theoretical data, suggesting a potential standardized method for assessing hydrodynamic resistance in microfluidic devices.

Mesentery was discovered as a new organ in 2017. It is a continuous membranous tissue from the duodenojejunal flexure to the anorectal junction. It has distinct anatomy, physiology, and disease states. Primary mesenteropathies include vascular and non-vascular diseases. Some of them are common, and some of them are rarely seen in clinical practice. Secondary mesenteropathies occur when infection or malignancy in another organ spreads to the mesentery. Each entity has specific diagnostic and treatment protocols.

A novel quasi-twisted miniaturized wideband Branch Line Coupler (BLC) is proposed. The design is based on bisecting the conventional microstrip line BLC transversely and folding bisected sections on double-layered substrates with a common ground plane in between. The pair of quarter wavelength horizontal parallel arms is converted to a Z-shape meandered microstrip line in the designed structure. On the other hand, the pair of quarter wavelength vertical arms are cut by half into two lines and converted to a periodically loaded slow wave structure. The bisected parts of BLC are placed on the opposite side of the doubled-layer substrate and connected through four vias passing through the common ground plane. This technique enabled a compact BLC size of 6.4×18 mm2, which corresponds to a surface area miniaturization by ~50% as compared to the classical BLC size of 10×23 mm2 at 6GHz, Moreover, the attained relative bandwidth is 73.9% (4.6-10 GHz) for S11, and 75.8% (4.5-10 GHz) for S33 as compared to 41% for the ordinary BLC at the same resonant frequency. The circuit is constructed on a double-layered low-cost FR4 substrate with a relative permittivity of 4.3, and a loss tangent of 0.025. An isolation of -13dB was realized in both S13 and S31 demonstrating an excellent performance. The transmission coefficients between input/output ports S21, S41, S23, and S43 are between -3.1dB to -3.5dB at the frequency of 6GHz. Finally, the proposed BLC provides phase differences between output ports of 90.5o and 94.8o at the frequency of 6GHz when the input ports 1 and 3 are excited, respectively. The presented design offers the potential of being utilized as a unit cell for building a Butler-matrix (BM) for sub-6GHz 5G beamforming networks.

This paper examines how housing prices are determined by macroeconomic factors in Saudi Arabia, namely, Gross Domestic Product Per capita (GDPP), Consumer Prices Index (CPI), and Unemployment Rate (UNEMP). Quarterly data for a period (2014q1 – 2019q4) were collected from publications of Saudi Arabian Monetary Authority (SAMA). Vector Autoregression Analysis (VAR) is employed to capture the dynamic effect of the variables on housing prices. Granger Causality, Variance Decomposition and Impulse response function are also used. The results show that housing prices are insignificantly and positively related to GDPP, whereas it is negatively related to both (CPI & UNEMP). Only CPI has a significant relationship. The three variables, jointly, have Granger causality on HPI. Variance decompositions show that CPI is the variable with the highest explanatory power over the variation of housing prices, followed by GDPP and the UNEMP respectively indicating that CPI is the most influential determinants for housing prices.

Systematics plays the most crucial role in biodiversity conservation which is at stake due to anthropogenic activities and environmental degradations. The ever-increasing decline of classical taxonomic expertise drives the need to develop molecular marker-based tools for quick, efficient, and reliable detection of organisms, to assess their ecological impacts for deepening our understanding of systematic and evolutionary relationships between organisms which is central to biology. The pace of alpha taxonomy has quickened by its integration with an increasingly fashionable and novel concept called DNA barcoding which utilizes a short genetic marker or barcode to categorize species for enhanced biodiversity assessment. As a supplementary but not complete alternative of systematics research, DNA barcoding, however, not error-free, brings precision in identification by solving existing problems of classical taxonomy and phylogenetics, irrespective of the growth stage of organisms, particularly for known taxa rather than unknown ones. Mitochondrial gene Cytochrome C Oxidase 1 (COI) serves as a universal animal barcode but there is no such universal barcode for plants and developing a suitable one is more challenging. With the recent advancement of Next Generation Sequencing (NGS), DNA metabarcoding technology is advancing rapidly. Still, ambiguity and error prevail with the correct identification of species due to some problems. After extensive analysis of the existing DNA barcoding papers, this review discusses commonly used DNA barcodes in plants and animals, their roles, advantages, limitations to solve existing problems of conservation biology and add the author’s views and recommendations.

This paper introduces the complex Rayleigh-van der Pol-Duffing oscillators (RVDOs), which are hyperchaotic and can be either autonomous or non-autonomous. The fundamental dynamics of the autonomous and nonautonomous complex RVDOs including dissipation, symmetry, fixed points and their stability are studied. These oscillators are found in various important fields of physics and engineering. The paper proposes a scheme to achieve phase synchronization (PS) and antiphase synchronization (APS) for different dimensional models. These kinds of synchronization are considered as generalization of several other types of synchronization. For this scheme we use the active control method based on Lyapunov stability theory. By analytically determining the control functions, the scheme achieved PS and APS. Our scheme is applied to study PS of hyperchaotic behaviours for two distinct hyperchaotic non-autonomous and autonomous complex RVDOs. Additionally, the scheme is employed to achieve APS of chaotic real non-autonomous RVDO and hyperchaotic complex autonomous RVDO, including those with different dimensions. Our work presents numerical results that plot the amplitudes and phases of these hyperchaotic behaviours, demonstrating the successful achievement of PS and APS.

Drug functionalization through formation of hydrophilic groups is the norm in phase I metabolism of drugs for modification of drug action. The reactions involved are mainly oxidative catalyzed mostly by CYP isoenzymes. The benzene ring, as phenyl or fused with other rings, is the most common hydrophobic pharmacophoric moiety in drug molecules. On the other hand the alkoxy group (mainly methoxy) bonded to the benzene ring assumes an important and sometimes essential pharmacophoric status in some drug classes. Upon metabolic oxidation, both moieties, i.e. the benzene ring and the alkoxy group, produce hydroxy groups; the products are arenolic in nature. Through a pharmacokinetic effect, the hydroxy group enhances the water solubility and elimination of the metabolite with the consequent termination of drug action. However, through hydrogen bonding, the hydroxy group may modify the pharmacodynamics of the interaction of the metabolite with the site of parent drug action (i.e. the receptor). Accordingly, the expected pharmacologic outcome will be enhancement, retaining, attenuation, or loss of activity of the metabolite relative to the parent drug. All the above issues have been presented and discussed in this review using selected members of different classes of drugs with inferences regarding mechanisms, drug design and drug development.

Inertial navigation system (INS) is a basic component for obtaining a continuous navigation solution in various applications. The INS navigation solution suffers from a growing error over time. In particular, its navigation solution depends mainly on the quality and grade of the inertial measuring unit (IMU) that provides the INS with both accelerations and angular rates. However, low-cost small micro-electro-mechanical systems (MEMS) suffer from tremendous error sources such as bias, scale factor, scale factor instability, and highly non-linear noise. Therefore, MEMS-IMU measurements lead to drifted solutions when used as a control input to the INS. Accordingly, several approaches have been introduced to model and mitigate the errors associated with IMU. In this paper, a machine learning-based adaptive neuro-fuzzy inference system (ML-ANFIS) is proposed to leverage the performance of low-grade IMUs in two phases. The first phase is training 50% of the low-grade IMU measurements with a high-end IMU to generate a suitable error model. The second phase involved testing the developed model on the remaining low-grade IMU measurements. A real road trajectory was conducted to evaluate the performance of the proposed algorithm. The results show the effectiveness of utilizing the proposed ML-ANFIS algorithm in removing errors and improving the INS solution compared to the traditional one. An improvement of 70% in the 2D-positioning and 92% in the 2D-velocity INS solution is attained when the proposed algorithm was applied compared to the traditional INS solution.

In an attempt to improve the quality of the agricultural drain in Egypt for its reuse again in the irrigation, low cost solution such as sand filter along with/ without other filtration media have been used in this research, As a result of that, pilot plant of sand filter mixed with other filtration media was tested for its ability to improve the sand performance in removing the suspended solids and organic matters from agricultural drain water of the Belbeis drain (in Sharkia governorate in Egypt). Only sand compared with sand with sponge and sand with Liyan Nanfang activated carbon (L.N.A.C) have been tested to find the optimum mixing sand/ medium ratio &optimum infiltration rate. The work has been done on four runs. It was found that sand mixed with sponge gave the best removal efficiency compared to that of the sand only and the sand mixed with L.N.A.C. The results presented that the concentration of CODt, CODsol and TSS was reduced from 125, 47 and 162 mg/l to 44, 34 and 28 mg/l respectively at optimum infiltration rate of 2 m³/m²/d for sand mixed with sponge.

Parkinson’s disease (PD) is a neurodegenerative disease that progresses with increasing age and some of its major symptoms include tremor, postural and movement related difficulties. Till date, the treatment of PD remains a challenge because available drugs only treat the symptoms of the disease or possess serious side effects. In light of this, new treatment options are needed, hence this study investigates the neuroprotective effects of an organic Boophone haemanthoides extract (BHE) and its bioactive compounds using an in vitro model of PD involving the toxin 1-methyl-4-phenylpyridinium (MPP+) and SH-SY5Y neuroblastoma cells. A total of seven compounds were isolated from BHE viz: distichamine (1), 1α,3α-diacetylnerbowdine (2), hippadine (3), stigmast-4-ene-3, 6-dione (4), cholest-4-en-3-one (5), tyrosol (6), and 3-hydroxy-1-(4`-hydroxyphenyl)-1-propanone (7). Six compounds (1, 2, 4, 5, 6, 7) were investigated and five showed neuroprotection alongside the BHE. This study gives insight into the bioactivity of the non-alkaloidal constituents of Amaryllidaceae since the isolated compounds and the BHE showed improved cell viability, increased ATP generation in the cells as well as inhibition of MPP+-induced apoptosis. Together, these findings support the claim that the Amaryllidaceae plant family could be a potential reserve of bioactive compounds for the discovery of neuroprotective agents.

Additive manufacturing (AM) provides customization of the microstructure and mechanical properties of components. Selective laser melting (SLM) is the commonly used technique for processing high strength Aluminum alloys. Selection of SLM process parameters could control the microstructure of fabricated parts and their mechanical properties. However, process parameter limits and defects inside the as-built parts present obstacles to customized part production. This study is the second part of a comprehensive work that investigates the influence of SLM process parameters on the quality of as-built Al6061 and AlSi10Mg parts. The microstructure of both materials was characterized for different parts processed over a wide range of SLM process parameters. The optimized SLM parameters were investigated to eliminate the internal microstructure defects. Mechanical properties of the parts were illustrated by regression models generated with design of experiment (DOE) analysis. The results reported in this study were compared to previous studies, illustrating how the process parameters and powder characteristics could affect the quality of produced parts.

Hepatocellular carcinoma (HCC) early diagnosis is challenging. Moreover, for patients with al-pha-fetoprotein (AFP)-negative HCC, this challenge is augmented. MicroRNAs (miRs) profile may serve as potential HCC molecular markers. We aimed to assess plasma homo sabines (hsa)-miR-21-5p, hsa-miR-155-5p, hsa-miR-192-5p, hsa-miR-199a-5p expression levels, as panel of biomarkers for HCC in chronic hepatitis C virus (CHCV) patients with liver cirrhosis (LC), es-pecially AFP-negative HCC cases, a step toward non-protein coding (nc) RNA precision medicine. Subjects and Methods: 79 patients enrolled with CHCV infection with LC, subclassified into LC group without HCC (n=40) and LC with HCC (n=39) in comparison with 15 apparently healthy control subjects. Real-time quantitative PCR was used to measure plasma hsa-miR-21-5p, hsa-miR-155-5p, hsa-miR-192-5p, and hsa-miR-199a-5p. Results: Plasma hsa-miR-21-5p and hsa-miR-155-5p demonstrated significant upregulation, while hsa-miR-199a-5p demonstrated significant downregulation in the HCC group (n=39) when compared to LC group (n=40). Hsa-miR-21-5p expression was positively correlated with serum AFP, insulin, and insulin re-sistance (r=0.5, p<0.001, r=0.334, p=0.01, and r=0.303, p=0.02, respectively). According to the ROC curves, for differentiating HCC from LC, combining AFP with each of hsa-miR-21-5p, hsa-miR-155-5p, and miR199a-5p improved the diagnostic sensitivity to 87%, 82%, and 84%, re-spectively, vs 69% for AFP alone, with an acceptable specificity of 77.5%, 77.5%, and 80%, respec-tively, and AUC= 0.89, 0.85, and 0.90, respectively vs. 0.85 for AFP alone. Hsa-miR-21-5p/hsa-miR-199a-5p and hsa-miR-155-5p/hsa-miR-199a-5p ratios discriminated HCC from LC at AUC=0.76 and 0.71, respectively, with sensitivities=94% and 92%, and specifici-ties=48% and 53%, respectively. Upregulation of plasma hsa-miR-21-5p was considered as an independent risk factor for HCC development [OR=1.198(1.063–1.329), p=0.002]. Conclusion: Combining each of hsa-miR-21-5p, hsa-miR-155-5p, and hsa-miR-199a-5p with AFP made possi-ble to identify HCC development in LC patients’ cohort with higher sensitivity than using AFP alone. Hsa-miR-21-5p/hsa-miR-199a-5p and hsa-miR-155-5p/hsa-miR-199a-5p ratios are poten-tial HCC molecular markers for AFP-negative HCC patients. Hsa-miR-21-5p was linked to insu-lin metabolism in HCC patients’ group as well as being an upregulated independent risk factor for the emergence of HCC from LC in CHCV patients.

Cantilever beams are the most widely used form of strain-driven energy harvesting, which uses piezoelectric materials. Although researchers are constantly seeking improved power output from cantilever-beam-driven piezoelectric energy harvesters, a systematic and fundamental analysis of the effect of beam geometry on the power capacity of energy harvesters warrants further investigation. Most of the previous research accounts for beams that are fully coated with piezoelectric material. While a larger coating area increases energy output, it also escalates costs as piezoelectric materials are very expensive. Considering the high cost of piezoelectric materials when dealing with limited piezoelectric material, enhancing power output can be achieved by employing a larger base beam and coating a portion of it at the fixed end. As such, the aim of this work is to investigate a wide variety of cantilever beam shapes (e.g., trapezoidal, triangular, V-cut, concave, and convex) with partial piezoelectric material coating on the base beam to maximize the power output capacity of the harvester. To ascertain a comparable argument, the surface area, volume, and mass of all the considered beam shapes are kept consistent, as these parameters influence the power output of the harvester. The geometry of each shape is systematically varied to understand the effect of geometric configuration on the output power density. Finally, the power capacities of all types of beams are compared, and a design is proposed to obtain the maximum power output. It was found that when the surface area of both the beam and piezoelectric material is kept constant and piezoelectric material is located at the fixed end, a trapezoidal beam with a smaller base width and larger free end width is the most efficient in generating power as long as the structural integrity is maintained. The finding is completely opposite as was suggested by previous studies, which proposed that a trapezoidal beam with a smaller free end yields higher output. Instead, this study demonstrates that an inverted trapezoidal beam produced higher output, considering partial coating compared to the full beam coating used in previous studies. Additionally, a correlation is presented on how the beam resonance frequency shifts with variation in beam parameters.

The research article provides an in-depth analysis of the European Medicines Agency (EMA) and the Directorate General of Drug Administration (DGDA), focusing on their historical development, organizational structures, and functional roles in ensuring the quality and safety of pharmaceuticals. The study highlights the origins of drug regulation, tracing back to the early 19th century in the United States with the establishment of the Food and Drug Administration (FDA), and discusses the evolution and significance of drug regulatory bodies worldwide. The EMA and DGDA are scrutinized for their efforts in maintaining high standards for drug approval, monitoring clinical trials, and managing post-marketing surveillance to prevent adverse drug reactions (ADRs). The EMA’s role in coordinating with EU member states on pharmacovigilance and the DGDA’s initiatives in Bangladesh, including the implementation of a nationwide drug database and pharmacovigilance system, are explored in detail. The article concludes by emphasizing the essential role of these regulatory bodies in safeguarding public health through stringent regulation and continuous monitoring of pharmaceuticals, thereby ensuring that only safe and effective medicines are available to consumers . It also provides an in-depth analysis of the roles, structures, and historical contexts of the European Medicines Agency (EMA) and the Directorate General of Drug Administration (DGDA). It outlines how these regulatory bodies ensure the safety, efficacy, and quality of medicinal products. The EMA, serving the European Union, and the DGDA, operating in Bangladesh, play critical roles in drug approval processes, pharmacovigilance, and maintaining public health standards. By setting rigorous guidelines and monitoring compliance, these agencies help safeguard the health of millions, ensuring that only safe and effective medications are available in the market. The paper underscores the importance of these regulatory bodies in promoting public health and supporting the pharmaceutical industry's development and innovation.

BACKGROUND G6PD deficiency is an inherited an X-linked recessive condition leading to insufficient levels of glucose-6-phosphate dehydrogenase, thus causing hemolytic anaemia under certain conditions. METHODS Our study is explorative for cases admitted to Jordan University Hospital. The studied parameters include demographics, clinical manifestations, biochemical markers including Hb level, WBC count, liver enzymes, and blood grouping. RESULTS Most of the patients were admitted to the emergency unit (53.13%). Individuals who were Rh-positive represented 57.81%, while patients of AB blood group accounted for 75%. The mean values were 4.81 years (age), 29.06 hours (time-to-hospital admission), 38.10 degree Celsius (temperature), 6.11 gm/dl (Hb), 13242.19 (WBC count), 343.20 U/L (S. ALP), and 50.98 IU/L (S. ALT). There was no significant difference between males and females or between favism-induced versus drug-induced hemolytic episodes. AB and Rh positive blood groups are of protective effect in relation to liver enzymes. Patients who were admitted to the hospital within 24 hours from having clinical manifestations had a better prognosis. CONCLUSION This study is the first inferential research on G6PD deficiency from the Middle East to explore cases from one of the largest healthcare centres in Jordan. The role of blood grouping should be investigated prospectively.

The ultimate objective of this research work is to design a sensitive and selective electrochemical sensor for efficient detection of ascorbic acid (AA), a vital antioxidant found in blood serum that may serve as a biomarker for oxidative stress. To achieve this, we utilized a novel Yb2O3.CuO@rGO nanocomposite (NC) as the active material to modify the glassy carbon working electrode (GCE). The structural properties and morphological characteristics of the Yb2O3.CuO@rGO NC were investigated using various techniques to ensure their suitability for the sensor. The resulting sensor electrode was able to detect a broad range of AA concentrations (0.5 - 1571 µM) in neutral phosphate buffer solution with a high sensitivity of 0.4341 µAµM-1cm-2 and a reasonable detection limit of 0.062 µM. The sensor's great sensitivity and selectivity allowed it to accurately determine the levels of AA in human blood serum and commercial vitamin C tablets. It demonstrated high levels of reproducibility, repeatability, and stability, making it a reliable and robust sensor for the measurement of AA at low overpotential. Overall, the Yb2O3.CuO@rGO/GCE sensor showed great potential in detecting AA from real samples.

Additive manufacturing (AM) of high strength Al alloys promises to enhance the performance of critical components related to various aerospace and automotive applications. The key advantage of AM is its ability to generate lightweight, robust, and complex shapes. However, the characteristics of the as-built parts may represent an obstacle to satisfy the part quality requirements. The current study investigates the influence of selective laser melting (SLM) process parameters on the quality of parts fabricated from different Al alloys. A design of experiment (DOE) is used to analyze relative density, porosity, surface roughness, and dimensional accuracy according to the interaction effect between the SLM process parameters. The results show a range of energy densities and SLM process parameters for the AlSi10Mg and Al6061 alloys needed to achieve “optimum” values for each performance characteristic. A process map is developed for each material by combining the optimized range of SLM process parameters for each characteristic to ensure good quality of the as-built parts. The second part of this study investigates the effect of SLM process parameters on the microstructure and mechanical properties of the same Al alloys. This comprehensive study is also aimed at reducing the amount of post-processing needed.

This paper focuses on the impact of defects density and carrier capture cross-section area in the electron transport material (ETM), hole transport material (HTM), and absorber layers on the performance of perovskite solar cells and quantum efficiency (QE). Furthermore, the impact of defects density at the interface between ETM/absorber and absorber/HTM is also studied. SCAPS-1D software is used in the current study in determining solar cell performance. The proposed perovskite solar cell structure is a planar FTO/TiO2/ CH3NH3PbI3/ Cu2O. The results indicated that increasing the defect density in the absorber layer significantly affects cell performance, while in ETM and HTM layers, the cell parameters remain unaffected. It is also found that the defect capture cross-section has a similar behavior to the defect density in the main layers (ETM, absorber, and HTM). In addition, it is observed that by increasing the defects density in the ETM/absorber and absorber/HTM interfaces layer, the cell parameters FF, Jsc, and PCE have been slightly decreased, with no effect on Voc. Moreover, it is also noted that the quantum efficiency QE is sharply reduced. Finally, this paper introduced the correlation between the defect density and the capture cross-section, which is the first attempt to find such a relationship in perovskite solar cells to the knowledge of the authors.

Hazardous chemicals like toxic organic dyes are very harmful to the environment and their removal is quite challenging. Therefore there is a necessity to develop techniques, which are environment friendly, cost-effective and easily available in nature for water purification and re-mediation. The present research work is focused on the development` and characterization of the ecofriendly polyvinyl alcohol (PVA) and alginate (Alg) hydrogel beads incorporating natural bentonite (Bent) clay as beneficial adsorbents for removal of toxic methylene blue (MB) from industrial water. PVA−Alg/Bent nanocomposite hydrogel beads with different Bent content (0, 10, 20, and 30 wt%) were synthesized via external ionic gelation method. The designed porous and steady structure beads were characterized by the use of Fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDX), and scanning electron microscopy (SEM). The performance of the beads as MB adsorbents was investigated by treating batch aqueous solutions. The experimental results indicated that the incorporation of Bent (30 w%) in the nanocomposite formulation sustained porous structure, preserved water uptake, and increased MB removal effi-ciency by 230 % compared to empty beads. Designed beads possessed higher affinity to MB at high pH 8, 30 °C, and fitted well to pseudo-second-order kinetic model a high correlation coefficient. Moreover, designed beads had a good stability and reusability as they exhibited excellent removal efficiency (90%) after six consecutive adsorption-desorption cycles. Adsorption process was found be combination of both monolayer adsorption on homogeneous surface and multilayer adsorption on heterogeneous surface. The maximum adsorption capacity of the designed beads system as calculated by Langmuir isotherm was found to be 51.34 mg/g, which is in good agreement with the reported clay-related adsorbents. The designed PVA−Alg/Bent nanocomposite hydrogel beads demonstrated good adsorbent properties and could be potentially used for MB removal from polluted water.

More than 110 countries including 500 cities worldwide have set the goal of reaching carbon neutrality. Heating contributes to most of the residential energy consumption and carbon emissions. The green energy transition of fossil-based heating systems is needed to reach the emission goals. However, the heating systems vary in energy source, heating technology, equipment location, and these complexities make it challenging for households to compare heating systems and make decisions. Hence, a decision support tool that provides a generalized ranking of individual heating alternatives is proposed for households as decision-makers to identify the optimal choice. This paper presents an analysis of 13 heating alternatives and 19 quantitative criteria in technological, environmental, and financial aspects, combines ideal solution based Multi-Criteria Decision Making with 6 weighting methods and 4 normalization methods, and introduces ensemble learning with a fuzzy membership function derived from Cauchy distribution to finalize the final ranking. The robustness of the proposed method is verified by 3 sensitive analyses from different aspects. Air to water heat pump, solar heating and direct district heating are the top three rankings in the final result under Danish national average data. A framework is designed to guide the decision-makers apply this ranking guideline with their practical feasible situations.

Face recognition is one of the most active research fields of computer vision and pattern recognition, with many practical and commercial applications including identification, access control, forensics, and human-computer interactions. However, identifying a face in a crowd raises serious questions about individual freedoms and poses ethical issues. Significant methods, algorithms, approaches, and databases have been proposed over recent years to study constrained and unconstrained face recognition. 2D approaches reached some degree of maturity and reported very high rates of recognition. This performance is achieved in controlled environments where the acquisition parameters are controlled, such as lighting, angle of view, and distance between the camera-subject. However, if the ambient conditions (e.g., lighting) or the facial appearance (e.g., pose or facial expression) change, this performance will degrade dramatically. 3D approaches were proposed as an alternative solution to the problems mentioned above. The advantage of 3D data lies in its invariance to pose and lighting conditions, which has enhanced recognition systems efficiency. 3D data, however, is somewhat sensitive to changes in facial expressions. This review presents the history of face recognition technology, the current state-of-the-art methodologies, and future directions. We specifically concentrate on the most recent databases, 2D and 3D face recognition methods. Besides, we pay particular attention to deep learning approach as it presents the actuality in this field. Open issues are examined and potential directions for research in facial recognition are proposed in order to provide the reader with a point of reference for topics that deserve consideration.

Purpose: The study aimed to investigate if there were any links between liver function biomarkers and immunoglobulins levels in serum, and Toll-like receptors (TLRs) and neuropilin-1 (NRP1) in COVID-19 patients. The study also aimed to assess the accuracy—sensitivity, specificity, and area under the curve (AUC) by the receiver operator curve (ROC) analysis for immunoglobulins levels and TLRs expressions. Patients and Methods: This study included 150 patients (100 patients with confirmed COVID-19 and 50 healthy volunteers as a control group). Patients with COVID-19 were subdivided into two groups according to the severity of symptoms (moderate and severe, with 50 patients each). Serum C-reactive protein (CRP), alanine aminotransaminase (ALT), aspartate aminotransaminase (AST), albumin, lactate dehydrogenase (LDH), immunoglobulin (Ig) G, and IgM levels were estimated. TLRs (TLR2 and TLR4) and NRP1 gene expression in blood samples were investigated using quantitative real-time polymerase chain reaction (qRT-PCR). ROC analysis was also applied to determine the accuracy of various detected parameters in predicting the possibility of COVID-19 infection. Results: In COVID-19 patients, serum parameters related to liver function, except serum albumin, CRP, IgG, IgM, and TLR2, TLR4, and NRP1 mRNA expression levels, significantly elevated compared to controls. Severe COVID-19 patients exhibited significantly higher liver enzymes (ALT, AST and LDH), CRP, and TLR2 mRNA expression levels and lower albumin levels than the moderate group. In the moderate and severe groups, ALT, CRP, TLR2, and TLR4 had a significant positive correlation with IgM levels. ALT, AST, LDH, CRP, TLR2, and TLR4 showed a significant positive correlation with IgG levels in both groups. In both the moderate and severe groups, NRP1 expression was found to be significantly correlated with CRP, IgG, IgM, TLR2, and TLR4. In contrast, serum albumin levels exhibited a significant negative correlation with IgG and IgM levels only in the severe group, but they showed a significant negative correlation with TLR2, TLR4, and NRP1 expression in both moderate and severe groups. Serum ALT and AST activities were positively correlated with NRP1 expression in the moderate group but not in the severe group and as well as TLR2 and TLR4 expression in both the moderate and severe groups. ROC analysis indicated that AUC was higher than 0.800 for serum IgM level and TLR4 gene expression in moderate COVID-19 group. Conclusions: The increased liver function biomarkers in serum and NRP1 expression are closely correlated with sustained activations in humoral and innate immune responses during COVID-19 infection. As a result, TLR2, TLR4, and NRP1 could be targets for limiting COVID-19 infection and impairment effects on liver function. Moreover, detection of IgM level in serum and TLR4 expression in blood have a good accuracy in predicting the possibility of infection with COVID-19 in moderate cases.

The branding of cities through their historical and cultural assets has become a pivotal strategy in urban development and tourism. This study focuses on Erbil Citadel, a UNESCO World Heritage Site, and its potential as a brand for Erbil, a city with a rich historical backdrop and flourishing urban landscape. The study aimed to explore the perceptions of Erbil's residents regarding the cultural significance of the Citadel and its potential as a city brand. A mixed-method survey questionnaire was conducted, collecting data from around 440 residents through both manual distribution around the Citadel and an online platform. The findings were analysed using SPSS to provide both descriptive and inferential statistical insights.

The Coastal Patrol and Surveillance Application (CPSA) is developed and deployed to detect, track and monitor water vessel traffic using automated devices. Latest advancements of marine technologies, including the Automatic Underwater Vehicles, have allowed the development of this type of applications. To facilitate their operations, installation of a Coastal Patrol and Surveillance Network (CPSN) is mandatory. One of the primary design objectives of this network is to deliver adequate amount of data within an effective time period. This is particularly essential for reporting a detection and notifying the current status of an intruder’s vessel through the adverse underwater communication channels. Additionally, intermittent connectivity of the nodes remain another important obstacle to overcome to allow smooth functioning of CPSA. Taking these objectives and obstacles into account, this work proposes a new protocol, named UDTN-RS, which is developed by ensembling forward error correction technique (namely Reed-Solomon codes or RS) in Underwater Delay Tolerant Network (UDTN) routing protocol with probabilistic spraying technique. In addition, the existing binary packet spraying technique is enhanced for supporting encoded packet exchange between the contacting nodes. A comprehensive simulation campaign is performed in identifying the effectiveness of the proposed protocol. The obtained results suggest that the proposed UDTN-RS protocol can be considered a suitable alternative of the existing protocols for sparse networks like CPSN.

Waste management is a critical issue globally, and Bangladesh is no exception, facing significant challenges due to rapid urbanization, population growth, and inadequate infrastructure. This article explores comprehensive waste management strategies, including waste segregation, recycling, composting, and waste-to-energy technologies, emphasizing their environmental and health benefits. It examines the past and present waste management conditions in Bangladesh, highlighting the progress made and the persistent challenges. The article also compares waste management practices in neighboring countries like India, Bhutan, Sri Lanka, and Nepal, offering insights into potential improvements for Bangladesh. Emphasizing the need for public awareness, community involvement, and modern infrastructure, it calls for collaborative efforts to achieve sustainable waste management and environmental preservation in Bangladesh. This article examines the critical issue of waste management, emphasizing its importance in mitigating environmental pollution, conserving resources, and protecting public health. It provides a detailed analysis of various waste management strategies, including waste segregation, recycling, composting, and waste-to-energy technologies, highlighting their benefits and implementation challenges. Focusing on Bangladesh, the article traces the evolution of the country's waste management system, from past inadequacies to recent improvements, while acknowledging persistent issues such as rapid urbanization and insufficient infrastructure. Comparisons with waste management practices in neighboring countries like India, Bhutan, Sri Lanka, and Nepal offer valuable insights and potential strategies for Bangladesh to adopt. The article underscores the necessity of public awareness, community involvement, and robust infrastructure to achieve effective waste management. It calls for a collaborative approach involving government, private sector, NGOs, and local communities to develop sustainable solutions. By investing in modern waste management technologies and fostering responsible consumption and disposal habits, Bangladesh can address its waste management challenges, ensuring environmental preservation, public health, and overall national well-being.

In this paper, a relativistic scalar particle under Lorentz symmetry breaking effects in the presence of a scalar potential is investigated. We introduce the scalar potential by modifying the mass via transformation M → M+S(r) in the wave equation and analyze the behaviour of a scalar particle. We see that the analytical solution to the KleinGordon equation can be achieved, and the energy eigenvalues and the wave function depends on the Lorentz symmetry breaking parameters as well as potential

Background and Objectives: In Libya, prescription medicines can easily be dispensed without a prescription, as self-medication with the subsequent of potential misuse and unnecessary risk for patients. This systematic review and meta-analysis explored the prevalence of self-medication among citizens in Libya. Methods: We systematically searched PubMed, ISI Web of Knowledge, EMBASE, Medline, Scopus, google scholar and ResearchGate databases for studies published in Libya reporting the prevalence of non-prescription use of medicines in community pharmacies, targeting studies published from Jan 2008 until Dec 2019. A random meta-analysis was performed to analyze pooled estimates of non-prescription usage of medicines. Results: Out of 63 articles identified, a total of 13 papers from 7 cities were met the inclusion criteria and involved a total of 4741 subjects. The overall pooled proportion of self-medication of drugs was 53.6% (95% CI: 0.93% - 1.08%), with low heterogeneity and the P-value of the whole population tasted was found to be = 1.000 (df = 12). Seven out of the 13 studies reported data on self-medication for antibiotics without prescription. The records ranged from 15.3% (95% CI 0.61–1.65) in Misurata to 76.6% (95% CI 0.80–1.25) in Tripoli. Conclusion: Self-medication use of medicines among Libyan population is a common phenomenon involving a high proportion use of antibiotics. This misuse of medications could enhance the development and spread of antibiotic resistance.

In this paper, we investigate how Rindler observer measures the universe in the ADM formalism. We compute his measurements in each slice of the space-time in terms of gravitational red-shift which is a property of general covariance. In this way, we found special relativity preferred frames to match with the general relativity Rindler frame in ADM formalism. This may resolve the widely known incompatibility between special relativity and general relativity on how each theory sees the red-shift. We found a geometric interpretation of the speed of light and mass.

Background: Despite their generally favorable prognosis, hepatic fibrosis remains a possible complication for hepatitis B virus (HBV) inactive carriers. This study aimed to estimate the prevalence of significant fibrosis and associated risk factors among Omani HBV inactive carriers. Methods: A retrospective study was conducted of 200 Omani HBV inactive carriers visiting a tertiary hospital in Muscat, Oman, between January 2017 and December 2018. Significant fibrosis (stage F2 or higher) was identified using two-dimensional shear-wave elastography. Baseline clinical, laboratory, and radiological data were analyzed to determine associations. Results: Of the total sample, 106 patients (53%) were male, and the mean age was 44.6 ± 9.3 years. The prevalence of significant fibrosis was 20% (n = 40). Male gender (p = 0.007), age ≥60 years (p = 0.024), and fatty changes in liver ultrasound (p = 0.044) were found to be independent factors for significant fibrosis. Conclusion: the prevalence of significant fibrosis was relatively high among a sample of Omani HBV inactive carriers, with several sociodemographic and clinical risk factors identified. Periodic assessment of liver function is needed for patients with these risk factors; moreover, routine biochemical parameters could be useful predictors of disease prognosis. Further research is recommended to substantiate these findings.

As prominent oil producers, the Gulf Cooperation Council (GCC) countries have played a significant role in the global energy market. However, as the world's attention increasingly shifts towards environmental sustainability, understanding the implications of the GCC's economic activities on CO2 emissions becomes indispensable. This research paper investigates the relationship between specific economic indicators and their impact on CO2 emissions in the GCC from 2001 to 2021. The study employs quantile regression, a powerful statistical method that estimates the conditional quantiles of a response variable given a set of predictor variables. The findings reveal several important insights: Financial institution efficiency is significant and negative at a 1% level at the lower (10th) -83537.3 and the higher quantile (90th) -549002.3. The relationship between GDP per capita and CO2 emissions varies across quantiles, highlighting the complexity of the growth-environment nexus. Total patents exhibit a positive and significant relationship with emissions, underscoring the importance of directing innovation towards environmentally sustainable solutions. Renewable energy consumption displays a nuanced relationship with CO2 emissions, with a stronger negative impact observed at higher consumption levels. This underscores the potential of renewable energy to mitigate emissions when integrated at scale. The study's outcomes hold crucial policy implications for the GCC countries as they seek to align economic growth with environmental sustainability. The findings emphasize the importance of fostering financial institution efficiency, promoting green innovation, and expanding renewable energy sources to reduce emissions

Healthcare workers (HCWs) in long-term care (LTC) faced and continue to experience significant emotional and psychological distress throughout the pandemic. Despite this, little is known about the unique experiences of LTC workers. This scoping review synthesizes existing research on the experiences of HCWs in LTC during the COVID-19 pandemic. Following Arksey and O’Malley’s framework, data were extracted from six databases from inception of the pandemic to June 2022. Among 3,808 articles screened, 40 articles were included in the final analysis. Analyses revealed three interrelated themes: carrying the load (moral distress); building pressure and burning out (emotional exhaustion); and working through it (a sense of duty to care). Given the impacts of the pandemic on both HCW wellbeing and patient care, every effort must be made to address the LTC workforce crisis and evaluate best practices for supporting HCWs experiencing mental health concerns during and post-COVID-19.

In the present study, fish were exposed to sub-lethal doses of CuONPs (68.92 ± 3.49 nm) (10, 20, and 50 mg/L) for a long exposure period (25 days). Compared to the control group (0.0 mg/L CuONPs), a significant dose-dependent elevation in blood urea and creatinine values, serum alanine transaminase, aspartate transaminase, and alkaline phosphatase enzyme activities were evident in CuONPs-exposed groups (P &lt; 0.05). Fish exposure to 50 mg/L CuONPs significantly upregulated the transcription of pro-inflammatory cytokines (tumor necrosis factor-alpha, interleukin-1beta, interleukin 12, and interleukin 8), heat shock protein 70, apoptosis-related gene (caspase 3), and oxidative stress-related (superoxide dismutase, catalase, and glutathione peroxidase) genes in liver and gills of the exposed fish in comparison with those in the control group (P &lt; 0.05). Moreover, varying histopathological injuries were noticed in the hepatopancreatic tissues, posterior kidneys, and gills of fish groups correlated to the examined exposure dose of CuONPs. In summary, our results provide new insights and helpful information for better understanding the mechanisms of CuONPs toxicity in Nile tilapia at hematological, molecular levels, and tissue levels.

Existing implants used with Total Knee Arthroplasty (TKA), Total Hip Arthroplasty (THA), and other joint reconstruction treatments, have displayed premature failures and frequent needs for revision surgery in recent years, particularly with young active patients who represent more than 55% of all joint reconstruction patients. Bone cement and stress shielding have been identified as the major reasons for premature joint failures. A breakdown of the cement may happen, and revision surgery may be needed because of the aseptic loosening. The significant mismatch of stiffness properties of patient trabecular bones and metallic implant materials in joint reconstruction surgery results in the stress shielding phenomenon. This could lead to significant bone resorption and increased risk of bone fracture and the aseptic loosening of implants. The present project introduces an approach for development of customized cellular structures to match the mechanical properties and architecture of human trabecular bone. It consists of four modules:1- characterization of geometry, microarchitecture, and stiffness properties of patient’s bones; 2- developing customized lattice structures tailored to mimic properties established in module 1; 3 - integration of developed lattice structure into full scale implant design and manufacturing; 4- implementation of the developed technology for use in implants that would overcome most of the issues related to aseptic loosening phenomenon. The present work aims at fulfilling the objectives of module 2 by exploring new designs of customized lattice structures and texture tailored to mimic closely patients’ bone anisotropic properties and that can incorporate an engineered biological press-fit fixation technique. The effects of various lattice design variables on mechanical performance of the structure are examined through systematic experimental plan using statistical design of experiments technique and analysis of variance method. All tested lattice designs were explored under realistic geometrical, biological, and manufacturing constraints. Of the four design factors examined in this study, strut thickness was found to have the highest percent contribution (41%) regarding the structure stiffness, followed by unit cell type, and cell size. Srut shape was found to have the lowest effect with only 11% contribution. The introduced solution offers lattice structure designs that can be adjusted to match bone stiffness distribution and promote bone ingrowth and hence eliminating the phenomenon of stress shielding while incorporating biological press-fit fixation technique.

This study involved the fabrication of a set of Aluminum ion-grafted SBA-15 utilizing ethylene-diamine and trimethylamine ionic liquids. The primary objective was to examine the impact of the fabrication environment on the physicochemical characteristics of the catalysts. Comprehensive characterization of the Al-SBA-15 catalysts was conducted using various techniques, including XRD, FTIR, surface area, pyridine FTIR, 27Al-NMR, TGA, HRTEM, and FESEM, to analyze their physicochemical characteristics. Furthermore, the acidic characteristics were examined by con-ducting potentiometric titration in a nonaqueous solvent and employing FTIR spectroscopy to an-alyze the chemisorbed pyridine. The effectiveness of the fabricated acid materials was evaluated by testing their performance in the acetic acid esterification with butanol. The findings obtained reveal that the mesostructured of SBA-15 remains intact following the successful inclusion of Al3+ ions into the silica frameworks. Additionally, a remarkable enhancement in the existence of both Bronsted and Lewis acid centers is noted due to the grafting process of Al3+ ions. At temperatures of 80°C and 100°C, the reaction in Al-SBA-15(T-120) proceeds swiftly, reaching approximately 32% and 38% conversion, respectively, within a span of 110 minutes. The excellent catalytic performance observed in the esterification reaction can be attributed to two factors: the homogeneous distribution of Al3+ ions within the SBA-15 frameworks and the acidic character of Al-SBA-15. The findings further indicate that the grafting process for incorporating Al3+ ions into the silica matrix is more efficient.

Presently, smartphones support a large range of applications, many of which require high computing power. This presents a problem because smartphones offer limited computing power, storage, and energy. Fortunately, Cloud computing (CC) is rapidly becoming known as the state of the art technology in the computer world. CC allows users to use unlimited dynamic resources when necessary. Mobile Cloud Computing (MCC) is integration into a mobile environment of the concept of cloud computing which eliminates barriers to the performance of mobile devices. The demand for mobile cloud applications and mobile user services is strong. This gives MCC a great opportunity to do business and research. However, security problems are a major obstacle to the adaptability of mobile cloud computing. This study presents the definitions of Cloud Computing, Mobile Computing (MC) and Mobile Cloud Computing including the architecture and applications of MCC. Furthermore, it discusses the challenges and opportunities faced in MCC.

: Controlling the distribution of water and wastewater between industrial processes is very vital in rationalizing water and preserving the environment. In this paper, a mathematical technique is proposed to optimize water-wastewater networks; a nonlinear program is introduced to minimize the consumption of freshwater, and consequently, the flowrate of the wastewater dis-charge will be also minimized. A general mathematical model, able to handle industrial plants containing up to eight sources and eight sinks, is developed using LINGO optimization software to facilitate dealing with complex case studies. The introduced model can handle single contam-inant networks as well as multiple contaminants cases. The optimal water network is synthe-sized through two steps; the first step is to introduce the case study data to the developed mathematical model. The second step considers using the optimal solution produced after run-ning the developed LINGO model as feed data for a pre-designed Excel sheet able to deal with these results and simultaneously draw the optimal water-wastewater network. The proposed mathematical model is applied to two case studies; The first case study includes actual data from four fertilizer plants located in Egypt; the water resources and requirements are simultaneously integrated to obtain a sensible cutting in both freshwater consumption (lowered by 52.2%) and wastewater discharge (zero wastewater discharge). The second case study is for a Brazilian pet-rochemical plant; the obtained results showed noticeable reductions in freshwater consumption for the second case study by 12.3 % while the reduction percentage of wastewater discharge is 4.5%.