The rapid convergence of Artificial General Intelligence (AGI), autonomous drones, and applied robotics presents a transformative opportunity for many sectors. However, this advancement also raises critical ethical and existential questions, particularly in warfare. This paper explores the concept of entropy as a metaphor for the potential disorder introduced by these increasingly complex technologies. We examine the risks of AGI surpassing human control in conflict situations, where autonomous decision-making could have disastrous consequences. We then analyze autonomous drones, scrutinizing their impact on warfare tactics and the ethical dilemmas surrounding independent, real-time decision-making. Finally, we investigate applied robotics in military operations, focusing on the delicate balance between enhanced capabilities and the potential for uncontrollable systems. Through a multidisciplinary lens, drawing on technology ethics, military strategy, and AI safety, this paper utilizes the concept of entropy to highlight the need for caution in developing these technologies. We propose a scientifically grounded and ethically sound framework to guide policymakers, technologists, and ethicists in navigating the path between innovation and global stability. This framework concludes with recommendations for responsible development and deployment strategies that can mitigate the risks associated with these powerful tools.

“Minas Frescal” cheese is a high moisture product, subject to the proliferation of several microorganisms. Essential oils are natural antimicrobial alternatives that can increase the quality of dairy products. This study aimed to analyze the antimicrobial action of oregano (Origanum vulgare) and rosemary (Rosmarinus officinalis) essential oils against Escherichia coli and Staphylococcus aureus. An antimicrobial test by diffusion and microdilution was performed to calculate the MIC (Minimum Inhibitory Concentration) and MBC (Minimum Bactericidal Concentration). The behavior of E. coli in “Minas Frescal” cheese added with oregano oil was evaluated. The MIC of oregano oil was 0.25% against E. coli and 1% against S. aureus. For rosemary essential oil, the MIC was 8% of against E. coli. There was no activity of rosemary oil against S. aureus. The MBC observed for oregano essential oil was 1% and 0.25% respectively for S. aureus and E. coli. Bacterial analysis during cheese storage with E. coli indicated inhibition of microorganisms by oregano essential oil at a concentration of 0.25%. No alterations were observed regards to physical-chemical attributes. The use of essential oil as an antimicrobial agent has potential for industrial use, and type of microorganism, oil and sensory reflexes in the product must be observed.

Polycystic Ovary Syndrome (PCOS) is the most common endocrine disorder that affects women of reproductive age representing the primary cause of anovulatory infertility. The nonapeptide oxytocin (OT) plays an important role in cognitive, emotional, and reproductive functions in human beings. Oxytocin receptors are expressed in several body parts including the ovaries. Despite this, the possible role played by oxytocin in symptoms of PCOS is not clear. The present systematic review aimed at understanding, the presence of possible oxytocin level alterations in PCOS, the connection between alterations of OT levels and the symptoms of PCOS, and the effect of oxytocin administration in PCOS. After a systematic search in the principal databases, seven studies, five human and two animal, were included. Most of the studies highlighted the role played by oxytocin in fertility issues related to PCOS. Studies that analyzed oxytocin basal levels in PCOS women agreed that PCOS is associated with a reduction in the serum level of oxytocin. Two studies found that in PCOS the serum levels of oxytocin were lower than healthy controls. One human and one animal study agreed about lower levels of PCOS, confirming a possible implication of a dysfunction of OT, in the pathogenesis of PCOS.

The maritime industry contributes to over 80% of global trade and ranks as the sixth-largest emitter of greenhouse gases. The International Maritime Organization has taken strides to reduce these emissions, while the European Union spearheads efforts to establish sustainable maritime transport. However, meeting decarbonisation targets poses significant challenges, with the potential implications of adopting an EU Emission Trading System (ETS) on shipping allowances, particularly at specific borders. If not managed effectively, this could result in diversifying regular container shipping routes away from EU ports, potentially leading to increased shipping emissions and disrupting the logistics trade and security chain. These challenges are exacerbated by the International Maritime Organization's lack of a carbon fee on bunkering, which creates an imbalance. The ETS Directive has fostered unfair competition between EU and non-EU ports due to discrepancies in applying emission unit allowances. It is imperative to implement preventive measures to contain and prevent the shift of operations from EU ports to nearby ports, ensure equitable treatment of EU transhipment ports and their competitors, and thwart carbon leakage. Additionally, the recent Houthis attacks on the Red Sea have significantly impacted shipping costs on the Cape of Good Hope route to Europe, necessitating increased allowances to and from Europe.

The plague caused by the Yersinia pestis bacterium is primarily a flea-transmitted zoonosis of rodents that can also be conveyed to humans and other mammals. In this work, we analyzed the spatial and temporal distribution of rodents’ populations during active and quiescent periods of the plague in the municipality of Exu, northeastern Brazil. The geospatial analyses had shown that all rodent species occurred through the whole territory of the municipality with different hotspots for the risk of occurrence of the different species. Important fluctuation in the rodent populations was observed with a reduction in the wild rodent fauna following the end of a plague epidemic period, mostly represented by Necromys lasiurus and increase of the commensally species Rattus rattus. A higher abundance of rats might lead to an increased exposure of humans populations, favoring spillovers of plague and other rodent-borne diseases. Our analysis contributed to further highlight the role of the wild rodent species as the amplifier hosts and of the commensally rats (Rattus rattus) as the preserver hosts on the quiescent period on that transmission infection area.

A review of desiccant dehumidification technologies for improving air-quality has been presented, especially focusing on alternatives for air conditioning systems for minimizing the Sick Building Syndrome. The principles and types of desiccant wheels, as well as the existing selection software for these types of equipment, were reviewed and comparatively evaluated. The study focuses on the Brazilian context, therefore, information about air condition systems and laws of this country were evaluated. Possible applications of desiccant wheels are also analyzed, such as their integration into cooling cycles and the sensible heat wheel. Finally, several commercial desiccant wheel selection software were evaluated, which are useful in many situations. Nevertheless, it was evidenced that the available softwares are not capable of performing an operation analysis for only a specific period. Therefore, it is essential to create computational tools to select desiccant wheels, considering the data from the different Brazilian regions for a year.

Urinary tract infections (UTIs) caused by Klebsiella pneumoniae can lead to severe clinical complications and even death. An alternative treatment option for infected patients is using bacteriophages (phages). In the present study, we isolated phage KP-1 from sewage water using K. pneumoniae as a host. Whole genome analysis indicated that the genome was a double-stranded linear 176,096-bp long DNA molecule with 41.8% GC content and did not contain virulence or antibiotic resistance genes. The inactivation potential of phage KP-1 was assessed in broth at an MOI of 1 and 10, and a maximum inactivation of 4.9 and 5.4 log CFU/mL was observed after 9 h, respectively. The MOI of 10 efficacy was also assessed in urine to evaluate the phage’s performance in an acidic environment. A maximum inactivation of 3.8 log CFU/mL was observed after 9 h. The results indicate that phage KP-1 could be used to control UTIs caused by K. pneumoniae; however, further studies using phage cocktails to broader the phage’s spectrum of activity and phages in micro- or nanocarriers to avoid the negative effect of the low pH of the urine on phage viability, are necessary.

The present work analyzes university students' perceptions on cyberbullying. More specifically, the main objective was to understand the level of concern displayed by young students in teacher training programs regarding cyberbullying; our analysis includes their degree of self-confidence and their commitment when faced with this problem, their self-reported training on the subject, and the measures they consider adequate to approach it in the educational context. Using a survey research design, 408 students from Early Childhood Education, Primary Education Degrees, and the Master’s Degree in Secondary Education, and Vocational Training from national public universities participated. The results shed light upon the coexistence of three differentiated profiles of teachers in training when faced with cyberbullying. However, although there is clear evidence of the high level of concern regarding this problem in every case, they placed more importance on raising awareness of the issue with families, prevention, management and training as basic pillars for re-directing the worrisome reality experienced in educational centers. The need to include these contents in the initial training of future education professionals, for overcoming cyberbullying, and the importance of collaborative work between parents and educators are the conclusions of this research study that are in agreement with other studies.

This study proposes a methodology for identifying time intervals in which time-of-use (ToU) energy tariffs can be set. This is achieved by analyzing the variability in electric power demand and esti-mating the potential for demand flexibility. The proposed methodology is as follows: first, data preprocessing is performed, focusing on the organization and cleaning of individual consumption records. Subsequently, the data are processed and classified by using consumption variability analysis and clustering techniques. Then, representative clusters are selected and time intervals are analyzed to identify periods of high electric power consumption variability. This methodology was tested with real data from smart meters in the Colombian electrical system, in which time intervals with potential for settinh ToU tariffs were ultimately identified. This work promotes the implementation of demand response strategies that enhance sustainability and facilitate the transition to a more resilient energy landscape both nationally and internationally. The findings are expected to contribute to the formulation of tariff schemes that encourage con-scious changes in electric energy consumption patterns.

This paper aims to explore differences in personality traits, focusing on the levels of primary psychopathy, between formal leaders of family and non-family companies as well as assessing differences in the job satisfaction levels of their employees. Moreover, we assess the relationship between the employees' perception of their formal leader’s primary psychopathy levels and their job satisfaction levels in family firms. The empirical evidence is provided by a sample of 95 Portuguese employees, who responded to a questionnaire that included their perception of their formal leader’s primary psychopathy level and job satisfaction measures. All respondents work in small and medium-sized private companies with no management responsibilities and under formal hieratical supervision. The initial idea that family firms’ employees perceive lower levels of primary psychopathy in their formal leaders than non-family firms’ employees was confirmed. However, employees of family and non-family firms did not differ in their job satisfaction levels. The results also support the notion that perceived levels of primary psychopathy in formal leaders are negatively associated with the employees’ job satisfaction levels. These findings contribute to the research literature by addressing two aspects under-addressed in the comparison between family and non-family firms, while offering insights on the relationship between primary psychopathy in formal leaders and job satisfaction levels of employees working in family firms.

The obtention of simple formulae for the Lebesgue constants arising in the the classical Fourier series approximation is presented. Both even and odd cases are treated enlarging Fejér result. Asymptotic formulae are also obtained.

Abstract: MicroRNAs can interfere with a protein function by suppressing their messenger RNA translation or the synthesis of its related factors. The function of brain-derived neurotrophic factor (BDNF) is essential to the proper formation and function of the nervous system and is seen to be regulated by many microRNAs. However, understanding how microRNAs influence BDNF actions within cells requires a wider comprehension of their integrative regulatory mechanisms. Aim: In this literature review, we have synthesized the evidence of microRNA regulation on BDNF in cells and tissues, and provided an analytical discussion about direct and indirect mechanisms that appeared involved in BDNF regulation by microRNAs. Methods: Searches were conducted on PubMed.gov using the terms “BDNF” AND “MicroRNA” and “brain-derived neurotrophic factor” AND “MicroRNA”, updated on September 1st, 2023. Papers without open access were requested from the authors. One hundred and seventy-one papers were included for review and discussion. Results and Discussion: The local regulation of BDNF by microRNAs involves a complex interaction between a series of microRNAs with target proteins that can either inhibit or enhance BDNF expression, at the core of cell metabolism. Therefore, understanding this homeostatic balance provides resources for the future development of vector-delivery-based therapies for the neuroprotective effects of BDNF.

Peri-implant diseases are defined as pathological inflammatory reactions in the tissue surrounding the osseointegrated implants. They are classified into two categories: mucositis - defined as peri-implant soft tissue inflammation and peri-implantitis - bone loss in the peri-implant region. A clinical case of a 61-years-old woman with an implant in the 46 anatomical position and a 5-year follow-up is presented. A probe depth of 5mm and a bone defect length of 35% was observed. The Implacure® Protocol was applied, with the main objective of eliminating the biofilm present on the exposed implant surface. There are multiple approaches to treat peri-implant diseases. While non-surgical treatment is essential for mucositis control, the treatment of peri-implantitis surgical treatment should be considered. Regenerative bone reconstruction promotes bone repair in the defect area and reduces bleeding during probing. To achieve that, autologous fibrin combined with Cerasorb M® was used. The proposed approach in the exposed clinical case involves the application of Implacure® Protocol, whose combination of the physical decontamination technique, together with the use of chlorhexidine and orthophosphoric acid, added with the combination Piperacillin + Tazobactam together with hyaluronic acid, provide a base that allows to regenerate bone using platelet-rich fibrin with Cerasorb M® and increase the survival time of the implant.

Lasiodiplodan, an exocellular Lasiodiplodia theobromae β-glucan exopolysaccharide (LaEPS), has at-tracted interest because of its antioxidant, antimicrobial, anti-inflammatory, and antiproliferative properties. LaEPS carboxymethylation enhances LaEPS water solubility and biological activities. However, carboxymethylated fractions of LaEPS (LaEPS-C): LLaEPS-C (Linear) and BLaEPS-C (Branched) were not widely studied yet. So, LaEPS-C, LLaEPS-C, and BLaEPS-C were assessed for their antioxidant, antimicrobial, antiproliferative, anticoagulant, immunomodulatory, and anti-viral activities. Elementary Chemical Composition Analysis confirmed their structural charac-teristics by Energy Dispersive X-Ray Detector (EDS), Fourier Transform Infrared (FTIR), Nuclear Magnetic Resonance (NMR), and Scanning Electron Microscopy (SEM) techniques. The best DPPH scavenging potential was achieved for LLaEPS-C for concentrations lower than 200mg/mL. LaEPS-C showed moderate antiproliferative activity for the NCI-ADR/RES cell (GI50 65.3 µg/mL), and BLaEPS-C showed weak activity for the K562 cell (GI50 235 µg/mL). LLaEPS-C had a reduced Prothrombin Time (PT) and a procoagulant effect. LLaEPS-C and BLaEPS-C are inducers of pro-inflammatory activity due to their ability to induce TNF-α in human macrophages. LLaEPS-C also showed anti-hRSV, which confirmed the antiviral activity of this molecule.

This paper reviews the unilateral and bilateral, one- and two-dimensional Laplace transforms. The unilateral and bilateral Laplace transforms are compared in the one-dimensional case, leading to the formulation of the initial-condition theorem. This problem is solved with all generality in the one- and two-dimensional cases with the bilateral Laplace transform. General two-dimensional linear systems are introduced and the corresponding transfer function defined.

The industry is increasingly relying on fish for toxicity assessment. However, current guidelines for toxicity assessment focus on teratogenicity and mortality. From an ecotoxicological point of view, however, these endpoints may not reflect the “full picture” of possible deleterious effects that can nonetheless result in decreased fitness and/or inability to adapt to a changing environment, affecting whole populations. Therefore, assessing sublethal effects add relevant data covering different aspects of toxicity at different levels of analysis. Impacts of toxicants on neurobehavioral function have the potential to affect many different life-history traits, and are easier to assess in the laboratory than in the wild. We propose that carefully-controlled laboratory experiments on different behavioral domains – including anxiety, aggression, and exploration – can increase our understanding of the ecotoxicological impacts of contaminants, since these domains are related to traits such as defense, sociality, and reproduction, directly impacting life-history traits. The effects of selected contaminants on these tests are reviewed, focusing on larval and adult zebrafish, showing that these behavioral domains are highly sensitive to small concentrations of these substances. These strategies suggest a way forward on ecotoxicological research using fish.

This paper sheds light on how crisis management affects post-disaster re-covery. Based on the study of the management of a major environmental disaster, hurricane IRMA, we consider how post-disaster recovery is impacted by crisis management strategies. The perspectives of local stakeholders from the islands of St Martin and St Barthélémy will be shared. We analyze how territories exposed to the same natural phenomena have different outcomes and consider some of the possible reasons. This study reveals underlying risk drivers, to address governance reorganization with a view to better managing socio-economic recovery.

Considering the various problems caused by infiltration in civil construction, this study aimed to identify the most appropriate waterproofing methods for different types of surfaces. A study was conducted on the mechanisms of water infiltration on surfaces and the waterproofing methods available on the market, focusing on asphalt blankets, in addition to a literature review highlighting state-of-the-art on this topic. A case study was also conducted in residence in Nova Lima, Brazil, analyzing different waterproofing techniques, including their characteristics and stages. Among the conclusions, it is highlighted that the implementation of adequate project, installation, inspection, and maintenance techniques can significantly reduce the waterproofing failure rate and repair costs and that the excellent choice of materials, along with the skill of the labor force in the application, is fundamental to guarantee the adequate performance of these materials in buildings.

The global movement of inputs, raw materials, products, and the marketing of products requires the use of supply chains. Green logistics refers to the set of policies and measures aimed at reducing the environmental impacts generated by logistics activities. The traditional supply chain has a certain inability to adapt to the rules agreed in Coop 15. The Green Supply Chain deals with the distribution flows of goods with a view to generating low environmental impact. The Green Supply Chain (GSC) involves aspects of reducing negative impacts throughout the logistics chain, from raw material suppliers, production to the distribution of the product to the customer. In this way, this article seeks to identify the factors that generate negative impacts in the traditional Supply Chain, thus helping to decarbonize it, and create a path for the development of the GSC and thus avoid interruptions in the distribution flow due to not meeting environmental targets. The main problem in decarbonizing the Supply Chain is its difficulty in complying with the rules agreed by the nations in COOP 15. To this end, a systematic literature review was carried out based on the available literature. Based on various articles and books, the parameters that define a Green Supply Chain and the factors that generate environmental impacts in conventional chains were identified. As a result, it was possible to verify a positive relationship between the carbon emission reduction factors that are linked to the supply chain performance factors found in the literature. Of the factors relating to the decarbonization of supply chains, some were more clearly related, such as reducing carbon emissions, reducing environmental risks and the ability to operate using new technologies. Future research could build on the limitations of this study.

The main objective of this work is to study the effects of carbon nanotubes (CNT) on the strength and electrical properties of cement mortar. Molecular dynamic simulations (MDS) were carried out for the mechanical and electrical properties of the cementitious composite and the associated mechanisms. To model the atomic structure of the Calcium-Silicate-Hydrates (C-S-H) gel, tobermorite 11Å was chosen. Single-walled carbon nanotubes (SWCNTs) embedded in tobermorite structure were tested numerically. In particular, the effect of the concentration of CNT in cement paste was studied. An innovative experiment of electrical characterization of a cementitious composite of carbon nanotubes has been developed.

The partial information decomposition (PID) framework is concerned with decomposing the information that a set of random variables has with respect to a target variable into three types of components: redundant, synergistic, and unique. Classical information theory alone does not provide a unique way to decompose information in this manner and additional assumptions have to be made. Inspired by Kolchinsky's recent proposal for measures of intersection information, we introduce three new measures based on well-known partial orders between communication channels and study some of their properties.

Avipoxvirus (APV), a linear dsDNA virus belonging to the subfamily Chordopoxvirinae of the family Poxviridae, infects more than 278 species of domestic and wild birds. It is responsible for causing the avian pox disease, which is characterized by its cutaneous and diphtheric forms. With a high transmission capacity, it can cause high economic losses and damage to the ecosys-tem. Several diagnostic methods are available and vaccination of birds can be an effective pre-ventive measure. To update the molecular characterization and phylogenetic analysis of viruses isolated in Portugal between 2017 and 2023, ten APV-positive samples were analyzed. A P4b gene fragment was amplified by PCR and the nucleotide sequence of the amplicons was deter-mined by Sanger sequencing. The sequences obtained were aligned using ClustalW, and a max-imum likelihood phylogenetic tree was constructed. With this study, it was possible to verify that the analyzed sequences are distributed in subclades A1, A2, B1, and B3. Since some of them are quite similar to others from different countries and obtained in different years, it is possible to conclude that there have been several viral introductions in Portugal. Finally, it was possible to successfully update the data on avipoxviruses in Portugal.

Count data analysis presents unique challenges due to its discrete nature, often exhibiting excessive zeros and overdispersion. To address these complexities, count models, such as Poisson regression and Negative Binomial regression, have been developed, enabling modeling and prediction of count-based phenomena. Additionally, it’s important to notice that zero inflation, a phenomenon commonly observed in count data, requires specialized techniques for robust analysis. This article provides an overview of count data and count models, explores zero inflation, introduces Likelihood Ratio Tests, and explains how the Vuong Test can be used as a model selection criteria. Furthermore, we created a Vuong Test implementation from scratch using the Python programming language. This implementation enhances the accessibility and applicability of the Vuong Test in real-world scenarios, providing a valuable contribution to the academic community, since Python didn’t have an implementation of this statistical test.

There are complex ethical dilemmas inherent in medicine teaching, particularly in clinical prac-tice involving actual patients. Questions must be raised on fulfilling medical students' training needs while still respecting patients' fundamental rights to autonomy and privacy. We aimed to assess patients' perspectives regarding medical students' involvement in their medical care. An observational, cross-sectional study was developed, and an interview-like questionnaire was ap-plied randomly to patients waiting for a consult/admitted to three distinct departments: General Surgery, Obstetrics/Gynaecology, and Infectious Diseases. Of the 77% interviewed patients who reported previous experiences with medical students, only 59% stated that they were asked for consent for their participation and 28% that students had adequately introduced themselves. Pa-tients from Gynaecology/Obstetrics were the ones who reported lower rates of these practices and were also the ones who were most bothered by students' presence, stating that they would refuse students' participation in the future. Male patients received more explanations than female pa-tients regarding the same matters. 35% of patients stated they would feel more comfortable without the medical students' presence. The study shows a need to pay closer attention to ful-filling patients' fundamental rights.

The growing interest related to the proposal of formal definition of a new geological period that has being called “Anthropocene” has introduced a buzzing dynamics in the scientific community, but its conduct is perhaps due to various interests involved in a discussion that has long surpassed the contours of the so-called “Geosciences”. Themes such as “Climate Change or Drift”, “Global Warming”, “Massive Extinction of Species” and “Loss of bio and geodiversity”, among others, are the wheel of a geomorphogenetic dynamics of anthropocentric origin, which leads the debate. But are the conditions for the formal establishment of a new morphosedimentary cycle following the Meghalayanian (Upper Holocene) Age? This work pursues a line of thought that seeks to answer these and other questions, based on the official position of the institutes that have the scientific competence for the formalization under consideration, and the formal criteria that should be considered for this purpose.

The Hubble parameter H(z), as a function of redshift, is modified by the presence of a new term originated from the extrinsic curvature in an embedded space-time. Assuming an asymptotic expansion factor $a\sim 0$ or, equivalently $z\rightarrow \infty$, it is obtained a nearly resemblance of the present model ($\beta$-model) with quintessence $w$CDM model with $H(z)\sim H_{wCDM}(z)$ at background level. In conjunction with $\Lambda$CDM, we test the models using a pack of recent datasets like that of the ``Gold 2018'' growth data, the best-fit Planck2018/$\Lambda$CDM parameters on the Cosmic Microwave Background (CMB), the Baryon Acoustic Oscillations (BAO) measurements, the Pantheon Supernovae type Ia and the Hubble parameter data with redshift ranging from $0.01 < z < 2.3$. Performing the Akaike Information Criterion (AIC) to ascertain the statistical viability of the model from Jeffreys' scale, we apply a joint likelihood analysis to the data with the Markov Chain Monte Carlo (MCMC) method. We find that the present model is in very good agreement with observations with a close statistical equivalence with the $\Lambda$CDM and $w$CDM cosmologies at 1-$\sigma$ level. We also show that a mild alleviation of the $\sigma$ tension between the growth amplitude factor and the matter content $(\sigma_8$-$\Omega_m)$ of the observations from CMB and Large Scale Structure (LSS) probes. A comparison of the aforementioned full pack of data in MCMC chains is made with the resulting MCMC from Pantheon SNIa+$H(z)$ in order to analyse the sensitivity of the models and how they respond to a cosmography analysis on the evolution of $H(z)$ and the deceleration parameter $q(z)$. In this sense, we find that only the $\beta$-model can be unaffected to the variations of the previous datasets due to its several minima in the likelihood (degeneracies) of the related parameters with an overall percentage relative difference only up to 4$\%$.

The ZX Spectrum was a popular 8-bit home computer by Sinclair Research in the 80s. Even though some of these computers may still work, the audio tapes, the TV with an analog tuner and the micro-switch joystick, used with the original ZX Spectrum, nowadays are outdated and hard to find in good working order or replicate. Since many other old closed systems are also very difficult to update to support modern peripherals, there is a necessity to provide a methodology to adapt such systems to support new peripherals while being compatible with existing software. The work proposed in this paper is focused on recreating a ZX Spectrum+/48k computer and interface it with modern peripherals on an FPGA. This is accomplished by adding a co-processor to assist with the control of the new peripherals which would either require to complex architectural changes to the original system and in the end it would perform poorly due to the low performance of the Z80 CPU. This work distances from previous ones on emulating a ZX Spectrum since it focuses on the use of different upgraded peripherals and the use of a NIOS II soft-processor as a co-processor to manage the SD Card accesses. A demonstration of the proposed modernized architecture was made by successfully running a diagnostics ROM and playing original ZX Spectrum games from an SD card for game with a PS/2 keyboard and a pair of joysticks.

The duality is one of the most interesting properties of the Laplace and Fourier transforms associated to the integer order derivative. Here, we will generalize it for fractional derivatives and extend the results to the Mellin, Z and discrete-time Fourier transforms. The scale and nabla derivatives are used.

The cell’s capacity to integrate and respond to spatial information is a crucial feature of morphogenesis and development. The Planar Cell Polarity (PCP) pathway is a signaling mechanism, widely conserved across metazoans, providing spatial orientation along the plane of an epithelium in morphogenic processes ranging from insect wing patterning to mammalian cochleae. Although the core genes involved in the PCP pathway have been molecularly identified in the 1990s, the PCP signaling mechanism remains controversial. In this article I discuss the main players and previous models of PCP signaling reported in the literature, and propose a new model. According to it PCP is established through an homophobic signal by transmembrane protein Frizzled (Fz): 1) a Fz signal in one cell repeals Fz itself in the adjacent cell, thereby generating symmetry breaking; 2) the instructive PCP signal is conveyed through Fz interaction with atypical cadherin Flamingo (Fmi). More broadly, homophobic signaling may represent a novel mechanism for cell-cell signaling of spatial information through modulation of cell adhesion rather than canonical ligand-receptor binding.

N-palmitoylethanolamine (PEA) is an endocannabinoid-like compound first encountered within lipid fractions of specific foods and has intrigued researchers since the 1950s due to its therapeutic effects. This study aims to explore the therapeutic promise held by PEA as an anti-inflammatory and immunomodulatory agent. Therapeutic impact of PEA reverberates across diverse physiological systems, as the central nervous system, gastrointestinal tract, vascular network, digestive and respiratory system. Additionally, it was effective in pain management, reduction of inflammation and immune responses. These attributes have fostered collaborations targeting conditions such as Alzheimer's disease, multiple sclerosis, cerebral ischemia, neuroinflammation, general inflammation, pain, coagulopathy, steatohepatitis, and acute lung injury. PEA operates both independently and in synergy with other compounds, like paracetamol, luteolin, and oxymetazoline. This efficacy stems from its interactions with pivotal targets including PPARα, PPAR-δ, PPAR-γ, CB1, CB2, GPR55, and TRPV1. Additionally, PEA exerts a direct influence on the inflammatory cascade, orchestrating precise adjustments in immune responses. Numerous animal studies have elucidated the inherent potential of PEA. Nevertheless, the imperative of reinforcing clinical investigation is evident. This review notably underscores the pivotal necessity for methodologically rigorous clinical trials to definitively establish the translational efficacy of PEA in ameliorating diverse inflammatory pathologies within the human milieu.

Different types of disasters, whether natural or human character, lead to the significant loss of human lives. In the latter case, the quick action of identification of corpses and human remains is mandatory. There are a variety of protocols to identify victims, however, genetics is one of the tools that allow an exact identification of the victim. However, several factors may interfere with this identification, from the biological samples’ degradation not allowing the analysis of nuclear information, to failure to dispose of biological samples from family members. Access to certain family members could be a determinant of the proper choice of genetic markers that allow the identification of the victim, or his/her inclusion in a given genetic maternal or paternal lineage. With the new advances in the genetic field, it is expected to allow soon the identification of victims from disasters only with his/her biological postmortem samples, being possible to draw a robot portrait and its most likely physical characteristics. In all cases, genetics is the only modern tool with universal character and can be used in essentially all biological samples, giving and identification of more or less accurate statistical character, depending on whether nuclear or lineage markers are used.

The relationship between perception of anxiety and quality of life in caregivers of children with autism was verified. To verify quality of life, the Short Form Healthy Survey Item was used; perception of anxiety was assessed using the Beck Anxiety Inventory. 80 caregivers of children with autism participated, with 68.7% of caregivers being mothers. Of the total number of caregivers, 68.8% had a severe level of anxiety. Regarding quality of life, they demonstrated greater impairment in Limitation due to physical aspects, Limitation due to emotional aspects, Vitality and Pain. Caregivers with severe anxiety levels had worse quality of life in the domains of pain (p = 0.012), social aspects (p =&lt; 0.001), limitation due to emotional aspects (p = 0.001) and mental health (p =&lt; 0.001). However, in the functional capacity domain, caregivers with a moderate level of anxiety had a better physical capacity score (p = 0.001). There was a negative correlation between the general anxiety score and the general physical (p = 0.029) and general emotional component of quality of life (p =&lt; 0.001). It was found that caregivers of children with ASD present losses related to psychological factors, quality of life and the lack of social support.

Abstract: Building Information Modelling (BIM) methodology has been empowering the quality of the construction activity in all sectors: multidisciplinary designs development; construction planning and monitoring; building management and maintenance. A BIM environment aggre-gates several disciplines and different professional skillsets and in order to control and improve the quality of a BIM project, a BIM manager is required. The BIM manager has the responsibility to coordinate all tasks involved in a building design and associated activities usually workout over the project documents. This professional can access to the distinct discipline models, located in a shared platform, and request for amendments if inconsistencies are detected. The topic of the present study is illustrated with three building cases were distinct specific projects, disciplines and tasks were elaborated: collaboration between disciplines (architecture, structures and con-struction); structural analyses and reinforcement details; quantity take-off of materials and cost estimation; construction scheduling and simulation. Although there are still limitations in the implementation of BIM methodology in all sectors and stages, within the construction industry, BIM has been bringing an important improvement in the quality of a building design, reflected in the quality of the final product. The present study put in evidence the BIM manager role in pro-jects that aggregates several disciplines and experts, bringing an important contribution in the quality of a building design. BIM methodology is a current demand in the construction industry supported on advanced technology and in an adequate management of projects.

We present organic, diamagnetic materials based on structurally simple (hetero-) tolane derivatives. They form crystalline thin-film aggregates that are suitable for Faraday rotation (FR) spectroscopy. The resulting new materials are characterized appropriately by common spectroscopic (NMR, UV-Vis), microscopy (POM), and XRD techniques. The spectroscopic studies give extremely high FR activities thus makes these materials promising candidates for future practical applications. Other than a proper explanation, we insist in the complexity of designing efficient FR materials starting off from single molecules.

Building Information Modelling (BIM) methodology have been optimizing the construction activity in all sectors: multidisciplinary designs development; construction planning and monitoring; building management and maintenance. A BIM environment aggregates several disciplines and different skillsets and in order to control and improve the quality of a BIM project, a BIM manager is required. The BIM manager has the responsibility to coordinate all tasks involved in a building design and associated activities usually workout over the project documents. The professional can access to various discipline models, located in a shared board, and request for amendments if inconsistencies are detected. The present study issue is illustrated with three building cases were distinct specific projects, disciplines and tasks were elaborated: collaboration between disciplines (architecture, structures and construction); structural analyses and reinforcement details; quantity take-off of materials and cost estimation; construction scheduling and simulation. Although there are limitations in the implementation of BIM methodology in all sectors and stages, within the construction industry, BIM have been bringing an important improvement in the quality of a building design, reflected in the quality of the final product. BIM methodology is a current demand in the construction industry supported on advanced technology and in an adequate management of projects, were the BIM manager has an important role.

Severe combined immunodeficiency disorders (SCID) are a genetically heterogeneous group of inherited defects characterized by severe abnormalities of immune system development and function that lead to a wide spectrum in clinical manifestations. A subgroup of patients presents a disabling and life-threatening clinical course. In these cases, allogeneic hematopoietic stem cell transplant provides a curative approach. The occurrence of SCID-associated lymphoproliferative disorders is rare and occur mostly in adenosine deaminase-deficient severe combined immunodeficiency disorders, after allogeneic hematopoietic stem cell transplant. Epstein Barr virus infection is present in the majority of individuals with primary immunodeficiency developing lymphoma, revealing compromised anti-tumour surveillance of virally transformed cells. Herein, we report a rare case of diffuse large B cell lymphoma occurring in an Epstein Barr virus negative, non-transplanted X-linked severe combined immunodeficiency 4-months-old infant, successfully treated with immunotherapy and allogeneic stem cell transplantation. This case suggests that Epstein Barr virus -independent mechanism of neoplastic transformation must take action in severe combined immunodeficiency associated lymphoma and unveils the curative potential of donor T cells after allogeneic transplantation.

Maghemite (γ-Fe2O3) is a mineral formed from magnetite oxidation at low temperatures, an intermediate metastable term of the magnetite to hematite oxidation and could be mixed with both. It has magnetic susceptibility similar to magnetite, crystal structure close to magnetite with which it forms a solid solution, while compositionally it equals hematite. Maghemite is thus easily misidentified as magnetite by X-ray diffraction and/or as hematite by spot chemical analysis in iron ore characterization routines. Nonstoichiometric magnetite could be quantified in samples of Brazilian soils and iron ores by the Rietveld method using a constrained refinement of the X-ray patterns. The results were confirmed by reflected light microscopy and Raman spectroscopy, thus qualitatively validating the method. X-ray diffraction with the refinement of the isomorphic substitution of Fe2+ by Fe3+ along the magnetite-maghemite solid solution could help to suitably characterize maghemite in iron ores, allowing for the evaluation of its ultimate influence on mineral processing, by affecting its surface and breakage properties.

With the increment of the aging population in recent years, neurodegenerative diseases exert a major global disease burden, essentially as a result of the lack of treatments that can stop the disease progression. Alzheimer’s Disease (AD) is an example of a neurodegenerative disease, that affects millions of people globally, with no effective treatment. Natural compounds have emerged as a viable therapy to fill a huge gap in AD management, and in recent years, mostly fuelled by the Covid-19 pandemic, RNA-based therapeutics have become a hot topic in the treatment of several diseases. Treatments of neurodegenerative diseases face significant limitations due to the complex and interconnected pathways that lead to their hallmarks and, also due to the necessity to cross the blood–brain barrier. Nanotechnology has contributed to surpass this bottleneck in the treatment of AD, by promoting safe and enhanced drug delivery to the brain. In particular, exosome-like nanoparticles, a hybrid delivery system combining exosomes and liposomes' advantageous features, are demonstrating great potential in the treatment of central nervous system diseases.

Natural fibers have attracted increasing interest as an alternative to produce environmentally friendly and sustainable materials. Particularly, hemp fibers have revealed to be widely used in various industrial applications due to their extremely unique properties. However, hemp can generate a large amount of agro-waste, and results in an attractive source of biopolymers for the development of low-cost materials in alternative to the raw materials and conventional petroleum-based plastics. In addition, deep eutectic solvents (DESs), a new type of truly green solvents, have been tested to remove gums, lignin, and other non-cellulosic components from hemp fibers. Reusing these components dissolved into the DESs to fabricate new materials directly by electrospinning is a very attractive but still unexplored endeavor. Thus, this innovative research to venture new upcycling pathways is focused on the fabrication of composite nanofibers by electrospinning of a gel-based blend of Poly(vinyl alcohol) (PVA) and hemp agro-waste (HW) dissolved into choline chloride (ChCl) : Glycerol (1:2) and ChCl : Urea (1:2) DES mixtures. The results obtained revealed that the produced nanofibers displayed uniform appearance with diameters ranging from 257.72 ± 65.63 nm to 380.78 ± 133.98 nm. In addition, the mechanical properties of the electro-spun composite nanofibers produced from the gel-based blends of HW dissolved in DESs and PVA (HW-DESs_PVA) were found to be superior, resulting in an enhanced tensile strength and Young’s modulus. Furthermore, the incorporation of HW into the nanofibers was able to provide bioactive antioxidant and antibacterial properties. Overall, this study demonstrated a promising, more sustainable, and eco-friendly way to produce electrospun composite nanofibers using HW in a circular economy perspective.

The molecular evolution of medulloblastoma is more complex than was previously imagined as emerging evidence suggests that multiples interactions between the tumor cells and components of the tumor microenvironment (TME) are important for tumor promotion and progression. The identification of several molecular networks within the TME, which interact with tumoral cells, has provided new clues to understand the tumorigenic roles of many TME components as well as potential therapeutic targets. In this review, we discuss the most recent studies regarding the roles of astrocytes in supporting the sonic hedgehog (SHH)–activated medulloblastoma molecular subgroup, and provide an overview of medulloblastoma progression through SHH expression and signal transduction mechanisms into the complex tumor microenvironment. In addition, we highlight the associations between tumor and stromal cells as possible prognostic markers and new therapeutic strategies.

BACKGROUND: Is pharmacovigilance at a moment of prominence for science and in relation to government responsibilities towards their nations, as the new coronavirus pandemic has surprised everyone in a negative and lethal way. OBJECTIVE: Evaluate pharmacovigilance as a resource for controlling and understanding the adverse effects caused by vaccines in use. DESIGN AND SETTING: Narrative review developed by a research group at Faculty of Medicine of the University of Porto. METHODS: This is a narrative review of the literature available in electronic media, government bulletins and similar bodies. The search was carried out using the descriptors: "Pharmacovigilance AND COVID-19 in Brazil", "Vaccine Development AND COVID-19 in Brazil", "Vaccination Hesitancy AND COVID-19 in Brazil", "Pharmacovigilance AND COVID-19", "Vaccine Development AND COVID-19", "Vaccination Hesitancy AND COVID-19", Pharmacovigilance AND COVID-19, Vaccine Development AND COVID-19, Vaccination Hesitancy AND COVID-19, "Public Health Surveillance AND COVID-19". In the period from May 2021 to June 2022. RESULTS: From the database search, 3 journal articles, 4 government bulletins and 535 scientific articles were identified. Of the total of 542 bibliographic materials, 36 were selected according to the selection criteria and objectives of the study. CONCLUSIONS: The vaccines in use have proven efficacy, despite adverse reactions that cannot be attributed solely and exclusively to their use, since the medical history of each patient should be considered in the investigation of each case, especially when there is death. The Brazilian data for adverse events, although the country is continental in its size, are acceptable given the number of deaths recorded.

Rhizosphere bacteria have a decisive influence on plant ionic adjustment, as well as in ameliorating plant growth under an array of stress situations. Plant growth-promoting rhizobacteria (PGPR) colonize the rhizosphere of plants and promote plant growth through mechanisms such as solubilization of mineral phosphates, biological N2 fixation, production of siderophores and phytohormones, and can induce systemic resistance in the plant. This can be of extreme importance when considering the restoration of salinized grounds by halophytic species. This present work aims to evaluate the physiological fitness and phytoprotection improvement by salt marsh PGPR in Halimione portulacoides under mild and severe salt stress. Plants inoculated with PGPR-consortium showed higher photochemical performances, improved antioxidant response, and promotion of osmotic balance traits, that boosted the individual’s ability to cope with mild salt stress. All these changes are also in line with the differential elemental profiles (Na, K, and Ca) observed in the different plant tissues. Even under severe salt stress, some physiological traits were improved when compared to the non-inoculated individuals. The results developed under this work, point out an important role of bioaugmentation in promoting plant fitness and improving salt tolerance, with a great potential for applications in seawater agriculture, restoration, and bio-reclamation of salinized soils.

The main objective of this investigation was to study the effect of organizational competencies development practices on turnover intentions and whether affective commitment explains this relationship. Another of the study's objectives was to test whether these relationships vary ac-cording to the generation to which the participant belongs. The study sample consisted of 2123 participants working in Portuguese organizations. The results indicate that organizational com-petencies development practices (training, individualized support, and functional rotation) nega-tively and significantly affect turnover intentions and that affective commitment mediates this re-lationship. However, these relationships vary according to the participant's generation. For Gen-eration Y and Generation X, this mediating effect is found in all dimensions of organizational competencies development practices. For the baby boomer generation, there is only a mediating effect of affective commitment in the relationship between individualized support and turnover intentions. These results indicate that human resources should consider the generation to which the participant belongs when implementing competencies development practices.

The circular economy (CE) has emerged as a viable alternative for tackling the problems caused by rising consumption, including solid waste (SW). The present study conducted a meta-analysis of research published between 2012 and 2022 on CE and solid waste management (SWM). A bibliometric analysis was used from the Web of Science (WoS) and Scopus databases. By studying the articles, we briefly discussed the connections between them and how one contributes to the evolution of the other. Some findings point to greater collaboration between Italy and Bolivia, followed by China and Malaysia. However, they move away from the traditional axes as the United States and Canada. In addition, it was found that the adoption of reuse and selective collection, in fact, allow the reduction of the volume of discarded materials. In this way, it was possible to conclude that a greater connection between CE and GRS makes it possible to optimize the useful life of landfills through the treatment of organic waste and recycling, to encourage waste picker cooperatives and selective collection programs, and to reduce the financial costs of the system as a whole, making it more durable and sustainable.

Data creation is often the only way for researchers to produce basic geospatial information for the pursuit of more complex tasks and procedures such as those that lead to the production of new data for studies concerning river basins, slope morphodynamics, applied geomorphology and geology, urban and territorial planning, detailed studies, for example, in architecture and civil engineering, among others. This exercise results from a reflection where specific data processing tasks executed in Google Sketchup (Pro version, 2018) can be used in a context of interoperability with Geographical Information Systems (GIS) software. The focus is based on the production of contour lines and Digital Elevation Models (DEM) using an innovative sequence of tasks and procedures in both environments (GS and GIS). It starts in Google Sketchup (GS) graphic interface, with the selection of a satellite image referring to the study area—which can be anywhere on Earth's surface; subsequent processing steps lead to the production of elevation data at the selected scale and equidistance. This new data must be exported to GIS software in vector formats such as Autodesk Design Web format—DWG or Autodesk Drawing Exchange format—DXF. In this essay the option for the use of GIS Open Source Software (gvSIG and QGIS) was made. Correcting the original SHP by removing “data noise” that resulted from DXF file conversion permits the author to create new clean vector data in SHP format and, at a later stage, generate DEM data. This means that new elevation data becomes available, using simple but intuitive and interoperable procedures and techniques which confgures a costless work flow.

Putting value to ecosystem services is something that society still refuses or simply ignores because it is not aware of the benefits that ecosystems provide us. In fact, people should be aware that a good understanding of ecosystem services can lead to win-win situations. Being aware of the importance of preserving the ecosystem and attaching value to its services will enable the development of self-sustaining strategies and appropriate policies for better ecological governance. Decades of over exploitation of natural resources, introduction and spread of alien species and, also, climate change, forest fires among other threats, have fostered biodiversity loss. The European Union Biodiversity Strategy has as one of its main goals to stop biodiversity loss and the degradation of ecosystem services; if possible, to recover the most threatened and degraded ecosystems, based on 20 Actions divided into 6 Targets. The present work falls within the scope of Action 5 of Target 2 – Improve knowledge of ecosystems and their services in the EU. The specific focus of this study is the Site of Community importance “Dunas de Mira, Gândara and Gafanhas” (Portugal) and the assessment of its ecosystem services, in accordance with the methodology proposed by the MAES (Mapping and Assessment of Ecosystems and their Services) Working Group. The work currently under way, a small segment of which is presented here, aims to identify, map and, when possible, assign value to the ecosystem services. For this purpose, modern GIS technologies will be used. This approach was implemented using a combination of data and tasks, including the photo-interpretation of Sentinel 2 (COPERNICUS Program) satellite imagery. The data geoprocessing tasks and image segmentation were developed using QGIS software and IMPACT Toolbox software (developed by the Joint Research Center – JRC, of the European Union), respectively. The analysis of Land Use and Burned Areas maps for the SCI "Dunas de Mira, Gândara and Gafanhas" led us to conclude that Forests ecosystems, the most affected by the fire of October 2017, continue to have the greatest expression in the area under study even though they have lost more than 50% of the area, and their services were also the ones most affected by the fire.

As the need to minimize environmental impact continues to rise, it is essential to incorporate, advance, and adopt renewable energy sources and materials to attain climate neutrality. It is established that economic growth is built upon infrastructure where cement industry plays a crucial role. However, it is also known that this industry is actively looking for ways to transition towards low-carbon practices to encourage sustainable and environmentally conscious practices. To this end, the use of refused derived fuels to substitute fossil fuels is very appealing, as these present the potential to lower the clinker production costs and CO2 emissions. Bearing this in mind, the primary objective of this work is to gain insights of the combustion behavior in an industrial rotary kiln, studying real-life scenarios and assessing the potential of substituting alternative fuels for fossil fuels to reduce CO2 emissions. A 3D CFD turbulent combustion model was formulated in Ansys® considering a Pillard NOVAFLAM® burner, where refused derived and petcoke fuels were used and different secondary air mass flows were considered. From the obtained results it was possible to conclude that the outcome of the combustion process is greatly influenced by the fuel-to-air ratio. Increasing the secondary air mass flow promotes the occurrence of a complete and efficient combustion process, leading to an enhanced fuel conversion and decreased formation of pollutants as CO, soot, and unburnt hydrocarbons.

The interest in random fiber lasers (RFLs), first demonstrated one decade ago, is still growing and their basic characteristics have been studied by several authors. RFLs are open systems that present instabilities in the intensity fluctuations due to the energy exchange among their non-orthogonal quasi-modes. In this work, we present a review of the recent investigations on the output characteristics of a continuous-wave erbium-doped RFL, with emphasis on the statistical behavior of the emitted intensity fluctuations. A progression from the Gaussian to Lévy and back to the Gaussian statistical regime was observed by increasing the excitation laser power from below to above the RFL threshold. By analyzing the RFL output intensity fluctuations, the probability density function of emission intensities was determined, and its correspondence with the experimental results was identified, enabling a clear demonstration of the analogy between the RFL phenomenon and the spin-glass phase transition. A replica-symmetry-breaking phase above the RFL threshold was characterized and the glassy behavior of the emitted light was established. We also discuss perspectives for future investigations on RFL systems.

Body-Esteem Scale is an assessment tool for adolescents and adults that evaluate three dimensions of self-evaluations of one’s body. Body-Esteem Scale has been translated and validated in some countries since America down to Europe. Lack of translation and reliability evidence in Portugal was detected. This study aimed to translate and test the validity and reliability of the Body Esteem Scale for Adolescents and Adults (BESAA) in students in the context of Portuguese higher educa-tion. A total of 173 students (60.7% are female) with a mean age of 19.7 (standard deviation = 2.2) years participated. Categorical Principal Component Analysis was used to assess the underlying dimensions of BESAA. Construct validity was evaluated through correlation with the Appearance Schemas Inventory – Revised and a three-factor model (“Appearance”, ‘‘Weight’’ and “Attribu-tion’’) was established. Confirmatory factor analysis was performed to verify the construct validity of the instrument. Items that had factor weights (λ)<.40 were removed, as well as those that were considered redundant by the modification indices estimated by the Lagrange Multipliers (LM) method (LM>11, p<.001). We observed high correlations between theoretically similar factors, and low correlations between different factors. The Portuguese BESAA showed adequate validity and reliability.

Defensive behavior is a function of specific survival circuits, the “aversive brain system”, that are thought to be conserved across vertebrates, and involve threat detection and the organization of defensive responses to reduce or eliminate threat. In mammals, these circuits involve amygdalar and hypothalamic subnuclei and midbrain circuits. The increased interest in teleost fishes as model organisms in neuroscience created a demand to understand which brain circuits are involved in defensive behavior. Telencephalic and habenular circuits represent a “forebrain circuit” for threat processing and organization of responses, being important to mounting appropriate coping responses. Specific hypothalamic circuits organize neuroendocrine and neurovegetative outputs, but are the less well-studied in fish. A “midbrain circuit” is represented by projections to interneurons in the optic tectum which mediate fast escape responses via projections to the central gray and/or the brainstem escape network. Threatening stimuli (especially visual stimuli) can bypass the “high road” and directly activate this system, initiating escape responses. Increased attention to these circuits in an evolutionary framework is still needed.

Rising consumer demand for more safety, healthy and fresh-like food has given new concepts for food packaging. Besides, the growing concern with environmental issues has increased the search for materials from non-petroleum sources and biodegradable ones. Thus, active films based on biopolymers loaded with natural active compounds have potential to be used as food packaging. However, there are a lot of lipophilic active compounds that are a problem to incorporate in hydrophilic matrices, such as polysaccharides and proteins. One way to overcome these challenges is adding these compounds encapsulated in O/W emulsions. The incorporation of emulsion in biopolymeric matrix has influence in the film properties, such as mechanical, barrier, optical, among other. In this way, this review aims to point out the main characteristics of the emulsions systems encapsulating active compounds and its influence in the film properties and to present and discus critically the recent advances in the area.

The rationalization and modeling of an electric discharge in a fluid require the knowledge of electron swarm parameters. In this work, transport coefficients of alcohols, including methanol, ethanol, propanol, and butanol are reported. The electron energy distribution function, mean energy, reduced mobility, and diffusion coefficient, are calculated using the two-term expansion of the electron Boltzmann equation in the frame of BOLSIG+ and the Monte Carlo collision code METHES. For such, experimental and theoretical values of the electron-alcohol collision cross-section, covering a range of electron impact energy from 1 eV to 1000 eV, are employed. A temperature of 300K, reduced fields E/N between $1-10^4$ Td (1Td = $10^{-21}~\rm Vm^2$), and Plasma density of $10^{19}~\rm m^{-3}$ were used in simulations. The calculated coefficients are compared with data available from previous studies.

Dipteryx spp. is an important species in reforestation in the Amazon. The objective of this study is to characterize and compare the relationships between dendrometric variables in Dipteryx spp. stands in the Western Amazon by fitting linear regression equations for total height and crown diameter. Six forest stands were evaluated in three municipalities. Dendrometric variables collected included diameter at 1.3 m height (dbh), total height (ht) and crown diameter (dc). Simple and multiple linear regression equations were fitted to characterize the relationships between ht and dc. The total aboveground biomass of Dipteryx spp. trees and the carbon stock of the stands were estimated. The general equations showed higher R² values, exceeding 0.7. The general equations for estimating ht and dc were significant for all coefficients. The trees averaged 22 t/ha of aboveground biomass in the stands. There was a variation in carbon sequestration potential among stands, ranging from 5.12 to 88.91 t CO2.ha-1. Single-input equations using dbh as an independent variable are recommended for estimating dc and ht for individual Dipteryx spp. stands. Stands in the Western Amazon play a significant role in carbon sequestration and accumulation. Trees can sequester an average of 4.8 tons of CO2 per year.

A realistic implementation of an all-fiber CO₂ sensor, using 74 cm of hollow core PCF fiber as the cavity for light/gas interaction, has been implemented. It is based on CO₂ absorbance in the 2 μm region. The working range is from 2% to 100% CO₂ concentration at 1 atm total pressure. The response time obtained was 10 min. The use of an FBG tuned fiber ring laser, specifically designed for this application, is discussed and preliminary results with this laser are also presented.

The synthesis of four samples of new polyurethanes was evaluated by changing the ratio of the diol monomers used, poly(propylene glycol) (PPG) and D-isosorbide, in the presence of aliphatic isocyanates such as the isophorone diisocyanate (IPDI) and 4,4′-methylenebis(cyclohexyl isocyanate) (HMDI). The thermal properties of the four polymers obtained were determined by DSC, exhibiting Tg values in the range 55-70 ºC, and their molecular structure characterized by FTIR, 1H and 13C NMR spectroscopies. The diffusion coefficients of these polymers in solution were measured by the Pulse Gradient Spin Echo (PGSE) NMR method, enabling the calculation of the corresponding hydrodynamic radii in diluted solution (1.62–2.65 nm). The molecular weights were determined by GPC/SEC and compared with the values determined by quantitative 13C NMR analysis. Finally, the biocompatibility of the polyurethanes was assessed using the HaCaT keratinocyte cell line by the MTT reduction assay method showing values superior to 70% cell viability.

The anti-Covid19 vaccination campaign has been fortified on the positive effects that immunization is bringing the nations, since infection rates, hospitalizations, and deaths have been falling according to the data in constant disclosure by official government organs and the channels of communication. In Brazil, the effective and free National Vaccination Program haven’t prioritized patients with rare diseases, who have extreme comorbidities, and who had to follow the calendar prepared by the government. The problematic question is why these “rare people” weren´t considered priorities. The understanding of the reasons and the resumption of the debate about the rights of patients with rare diseases justify this study, which sought to be based on regular descriptors issued by official government agencies and by critics of rare disease issues in debates made in scientific articles. We sought to respond to the following objectives: analyze dispensed care of rare disease patients in the vaccination campaign anti-Covid-19; identify the procedures implemented by the National Vaccination Plan for the Brazilian population over 18 years of age; describe the panorama of the pandemic disease since its discovery to the mutations already disseminated; and evaluate the effectiveness of the plan implemented from the perspective of “rare person”.

The mechanism by which the pigment melanin is transferred from melanocytes to keratinocytes to achieve skin pigmentation remains controversial. Several models emerged in the past decades to explain the transfer process. Here, we review the proposed models for melanin transfer in the skin epidermis, the available evidence supporting each one, and the recent observations made by ours and other groups in favor of the exo/phagocytosis and shed vesicles models. Moreover, we propose that different models could coexist to sustain skin pigmentation under different conditions. Finally, we discuss new questions that ought to be addressed to solve the long-lasting quest for the understanding of how basal skin pigmentation is controlled. This knowledge will allow the emergence of new strategies to treat pigmentary disorders that cause a significant socio-economic burden to patients and healthcare systems worldwide and could also have relevant cosmetic applications.

In healthy adult brain, glial cell line-derived neurotrophic factor (GDNF) is exclusively expressed by neurons and in some instances, it has furthermore been shown to derive from a single neuronal subpopulation. Secreted GDNF acts in a paracrine fashion by forming a complex with GDNF family receptor α1 (GFRα1) which is mainly expressed by neurons and can act in cis as a membrane-bound or in trans as a soluble factor. The GDNF/GFRα1 complex signals through interaction with RET (“rearranged during transfection”) or with a lower affinity with neural cell adhesion molecule (NCAM). GDNF can also signal independently from GFRα1 via interaction with syndecan-3. RET being expressed by neurons involved in several pathways: nigro-striatal dopaminergic neurons, motor neurons, enteric neurons, sensory neurons, etc. could be the main determinant of the specificity of GDNF pro-survival effect. In injured brain, de novo expression of GDNF occurs in glial cells. Neuroinflammation has been reported to induce GDNF expression in activated astrocytes and microglia, infiltrating macrophages, nestin-positive neural stem cells and neuron/glia (NG2) progenitors. This disease-related GDNF overexpression can be either beneficial or detrimental depending on the localization in the brain and the level and duration of glial cells activation. Some reports also describe upregulation of RET and GFRα1 in glial cells, suggesting that GDNF could modulate neuroinflammation.

The Neotropical region is one of the most diverse regions of the globe in terms of macro-organismic species. Regarding the microbial world, however, little is known about the diversity and biogeography patterns of micro-organisms in the Neotropics. In this context, the study of several microbial taxonomic groups is still missing and/or incomplete, such as the protists. Our goal here was to summarize the available information of Neotropical protists, focusing on molecular data from environmental continental samples, to explore what these data evidence on their ecology and biogeography. For this, we reviewed the findings from all articles that focused on or included the terrestrial protists using metabarcoding approach and identified the gaps and future perspectives in this research field. We found that Neotropical protists diversity patterns seem to be, at least in part, congruent with that of macro-organisms and, different than plants and bacteria, just weakly explained by environmental variables. We argue that studies with standardized protocols including different biomes are necessary to fully characterize the ecology and biogeography on Neotropical protists. Furthermore, dismember evolutionary lineages and functional guilds of protists are important to better understand the relationship between diversity, dispersal abilities and functionality of particular taxa of protists in their habitats.

Product Development Process is widely known among industry and automobile companies. With the advance of technology and the need to improve product efficiency, many companies have been applying Lean Thinking principles. Their benefits lead those companies to implement their concepts and tools, like Value Stream Design in Indirect Areas, Obeya, Just-in-time (JIT) which is based on the production control system developed and implemented by Toyota. This article describes the case study of the implementation of Lean Product &amp; Process Development (LPPD) on the current Product Development Process (PDP) in an automotive company. The PDP was created by the organization and adapted from Advanced Product Quality Planning (APQP). The main findings were a Value Stream Design model of an improved PDP as a useful and successfully contribution for the company. These improvements reduced the product development lead time from 700 days to 369 days. The process efficiency increased from 68% to 85%. The communication and transparency between the cross-functional team (CFT) was improved and show promise for achieving a successful launch of new products.

The partial information decomposition (PID) framework is concerned with decomposing the information that a set of (two or more) random variables (the sources) has about another variable (the target) into three types of information: unique, redundant, and synergistic. Classical information theory alone does not provide a unique way to decompose information in this manner and additional assumptions have to be made. One often overlooked way to do this decomposition is using a so-called measure of union information – which quantifies the information that is present in at least one of the sources – from which a synergy measure stems. In this paper, we introduce a new measure of union information based on adopting a communication channel perspective, compare it with existing measures, and study some of its properties. We also include a comprehensive critical review of characterizations of union information and synergy measures that have been proposed in the literature.

Lycoriella species (Sciaridae) are responsible for significant economic losses in greenhouse production (e.g. mushrooms, strawberry, and nurseries). Current distributions of species in the genus are restricted to cold-climate countries. Three species of Lycoriella are of particular economic concern in view of their ability to invade across the Northern Hemisphere. We used ecological niche models to determine the potential for range expansion under climate change future scenarios (RCP 4.5 and RCP 8.5) in distributions of these species of Lycoriella. Stable suitability under climate change was a dominant theme in these species; however, potential range increases were noted for key countries (e.g. USA, Brazil, and China). Our results illustrate the potential for range expansion in these species in the Southern Hemisphere, including some of the highest greenhouse production areas in the world.

One way to increase overall natural gas engine efficiency is to transform exhaust waste heat into useful energy by means of a bottoming cycle. Organic Rankine cycle (ORC) is a promising technology to convert medium and low grade waste heat into mechanical power and electricity. This paper presents an energy and exergy analysis of three ORC-Waste heat recovery configurations by using an intermediate thermal oil circuit: Simple ORC (SORC), ORC with Recuperator (RORC) and ORC with Double Pressure (DORC), and Cyclohexane, Toluene and Acetone have been proposed as working fluids. An energy and exergy thermodynamic model is proposed to evaluate each configuration performance, while available exhaust thermal energy variation under different engine loads was determined through an experimentally validated mathematical model. Additionally, the effect of evaportating pressure on net power output , absolute thermal efficiency increase, absolute specific fuel consumption decrease, overall energy conversion efficiency, and component exergy destruction is also investigated. Results evidence an improvement in operational performance for heat recovery through RORC with Toluene at an evaporation pressure of 3.4 MPa, achieving 146.25 kW of net power output, 11.58% of overall conversion efficiency, 28.4% of ORC thermal efficiency, and an specific fuel consumption reduction of 7.67% at a 1482 rpm engine speed, a 120.2 L/min natural gas Flow, 1.784 lambda, and 1758.77 kW mechanical engine power.

The current manuscript presents a review on existing kiln burner technologies for the cement production process, in the context of the current climate of energy transition and environmental remediation. Environmental legislation has become ever stricter in response to global climate change, and cement plants need to adapt to this new reality in order to remain competitive in the market and ensure their longevity. The cement production process is a well-established technology with more than a century of existence. There are several plants in operation whose process is outdated by modern standards, particularly considering the current industry decarbonization needs. The cement process requires tremendous amounts of energy, mainly recovered from the combustion of solid, liquid or gaseous fuels, which yields massive emissions of greenhouse gases. Thus, an important onus is placed upon the minimization of pollutant emission in the combustion system, as well as a substitution of fossil fuels with more sustainable alternatives. One of the sus-tainable alternative fuels comes in the form of refuse derived fuels (RDF). These high caloric frac-tions of municipal solid waste present a double advantage by reducing the amount of fossil fuels used and reducing the landfilling fraction of waste. However, their use in rotary kiln burners comes with important limitations for burner operation, namely that a high degree of control over primary air supply is needed to ensure complete combustion with minimal pollutant emission.

The study seeks to unravel the intricate operational sequence involved in preparing prehistoric pigments for rock art within the Puerto Roque rock art shelter. Sixteen pigment samples, identified as Lab Code Puerto_1 to Puerto_16, were meticulously collected from specific figurative representations. Additionally, three ochre samples (Puerto_17, Puerto_18, and Puerto_19) were sourced from the shelter's soil. Employing a comprehensive multi-analytical approach, including Raman microspectroscopy, X-ray microfluorescence (EDxrf), Fourier-transform Infrared spectroscopy (ATR-FTIR), and Scanning Electron Microscopy (SEM), all nineteen samples underwent thorough analysis. The research unveiled a spectrum of distinct red pigments within the rock art depictions. The sampling strategy for the 16 panels in the Puerto region was meticulously designed to capture the diverse array of rock art manifestations, each presenting unique characteristics that warranted detailed scientific investigation. The selection of these panels was guided by the recognition of various artistic techniques employed in the creation of the paintings, the nuanced hues exhibited, prevalent erosion issues, potential effects of sunlight exposure, and the intriguing hypothesis of distinct chronological periods due to several superimpositions detected. Notably, darker pigments in samples Puerto_02, Puerto_10, and Puerto_19 revealed a composition of hematite with the added presence of carbon. Meanwhile, Puerto_08 exhibited an orange hue primarily composed of goethite. Bright red pigments in samples Puerto_01, Puerto_03, Puerto_05, Puerto_07, Puerto_09, and Puerto_11 were predominantly characterised by hematite, as confirmed by Raman analysis. EDxrf analysis demonstrated an elemental composition akin to the three ochre pieces examined. Furthermore, ATR-FTIR spectroscopy suggested the potential influence of a heating process in enhancing red coloration, corroborated by spectral results from specific samples. This finding aligns with prior research, underscoring the technological sophistication embedded in early artistic endeavours. The detailed understanding of pigment types and their preparation methods provides insights into the artistic choices and technological adeptness of prehistoric communities. Beyond the archaeological implications, these findings contribute significantly to the ongoing conservation efforts of rock art sites. The amalgamation of diverse analytical techniques showcased their efficacy in elucidating the intricate world of pigment preparation. Recognizing the unique microclimates at each rock art site that influence pigment preservation, this localised approach aids informed decisions in safeguarding these invaluable cultural resources. In essence, this study not only unravels the artistic past but also advocates for the sustainable conservation of our shared cultural heritage.

The objective of this research was to study the drying kinetics of passion fruit seeds, which are a byproduct of the industrial processing of passion fruit, with the potential to produce byproducts such as oil and flour. After drying, the seeds were directed for cold-press oil extraction, and the quantification of fatty acids was performed. Following the oil extraction, the residues underwent a grinding process to produce flour, which was characterized in terms of its nutritional aspects. The drying process was conducted using an experimental forced convection dryer with controlled temperatures of 40, 50, 60, and 70 °C, and a drying air velocity of 1.5 m s-1. This work introduced a novel approach using mathematical models, all derived from Fick's equation. For each model, the activation energy and thermodynamic properties related to the drying procedure were determined. Fatty acids in the oils and physicochemical characteristics of the defatted residue's flour were also analyzed. The Cavalcanti Mata, Henderson &amp; Pabis, and Page models modified by Cavalcanti Mata were found to best fit the experimental data. The highest proportions of unsaturated fatty acids in passion fruit oil were linoleic acid (Omega-6) at 68.8% and oleic acid (Omega-9) at 16.1%. The predominant saturated fatty acid was palmitic acid at 10.61%, with no significant differences observed in relation to the drying temperatures. It can be concluded that the composition of the flour from the residue of passion fruit grain oil extraction varies in terms of crude fiber content, ranging from 56.36% to 58.8%, and protein content, ranging from 15.6% to 18.26%, with significant differences observed concerning the drying temperatures. The lipid content varied from 13.5% to 13.76%, with no significant differences observed across the evaluated drying temperature variations.

Fungal infections caused by Candida spp. are responsible for high hospital morbidity and mortality rates. Therefore, there is a continuous search for new antifungal medicines, particularly ones with anti-Candida activity. This review analyzed articles published between 2002 and 2023 considering the anti-Candida activity of chemical compounds identified or isolated in plants of the Anacardiaceae family. In addition, the in-silico prediction of the isolated compounds described was performed. The analysis of 35 studies showed that extracts, essential oils, and compounds from the anti-Candida activity were frequently determined in vitro using the minimum inhibitory concentration (MIC). The most commonly tested species were Candida albicans, C. tropicalis, C. parapsilosis, C. glabrata, C. krusei, and C. guilliermondii, respectively. Essential oils were the most used form (37% of the studies). The isolated compounds with antifungal effects include cardanol, estragole, trans-anethole, β-caryophyllene, myrcene, catechin-3-o-rhamnoside, β-sitosterol-3-O-glucoside, 24Z-isomasticadienolic acid, oleanolic acid, and oleanolic aldehyde. The in-silico evaluation of those isolated compounds revealed the compounds' drug-likeness and possible antifungal activity. However, some of them showed high toxicity. In conclusion, compounds from the Anacardiaceae family show promise for developing new therapeutic antifungal drugs, especially in combination with conventional antifungals.

Fires in houses are inevitable and they cause loss of life and major repair costs for the damage structure and contents. There is a clear need to prevent its ignition and spread to adjacent areas. This article presents the steps taken, namely: contacts, data collection, tests, analysis and conclusions regarding the accident resulting from the outbreak and spread of a fire, on December 25, 2020, in a traditional Portuguese house in Arganil, Portugal. The owners and the court requested to carry out an expert opinion by a person with specialized technical-scientific knowledge, which led to this work as an expert. the work consists of carrying out observations and data analysis. Then, the observed and analysed data were laboratory tested in order to consistently identify characteristics that lead to the ignition and propagation of the fire. This work identified construction problems, materials used and heat sources that are responsible for the accident. The conclusions may be used to avoid future incidents or accidents with houses of same construction type.

Acid stress poses a common challenge for bacteria in diverse environments by the presence of inorganic (e.g., mammals’ stomach) or organic acids (e.g., feed additives; acid-based disinfectants). Limited knowledge exists regarding acid-tolerant strains of specific serotypes, clonal lineages, or sources in human/animal pathogens, namely non-typhoidal Salmonella enterica (NTS) and Enterococcus faecium (Efm). This study evaluated acidic pH and peracetic acid (PAA) susceptibility of Efm (n=72) and NTS (n=60) from diverse epidemiological/genetic backgrounds, and with multiple antibiotic resistance profiles. Efm minimum growth/survival-pH was 4,5-5/3-4 and for NTS 4,0-4,5/3,5-4,0. Among Efm, only those of clade-non-A1 (non-hospital associated) or food chain demonstrated greater tolerance to acidic pH compared to clade-A1 (hospital-associated clones) or clinical isolates (P<0.05). MDR (multidrug-resistant) NTS survived better to acidic pH (P<0.05). The MICPAA/MBCPAA was 70-120/80-150mg/L for Efm and 50-70/60-100mg/L for NTS. Efm-clade-A1 or MDR strains exhibited higher PAA tolerance than clade-non-A1 or non-MDR ones (P<0.05). Higher tolerance was found in non-MDR and clinical NTS than in food chain isolates (P<0.05), but not between different serogroups. This unique study identifies specific NTS or Efm populations more tolerant to acidic pH or PAA, emphasizing the need for further research to tailor control measures of public health and food safety within a One Health framework.

Thermal comfort is extremely important in architecture, especially in environments with more people spending longer on studies or intellectual activities. This research describes a case study to investigate university buildings' energy and thermal performance as a part of the ANEEL program. Due to this importance, and the need to save energy in Brazilian public buildings, the ANEEL-the Brazilian Energy Electricity Regulatory Agency, launched 2016 a national program focusing on energy efficiency in public universities around the country. University offices and classrooms require high intellectual effort; thus, environmental comfort is critical for maintaining its users' physical and mental health. This study included a pre-diagnosis of the performance of the envelope, lighting, and air conditioning systems and a survey about the quality of the environments from the users' point of view. The Prescriptive Method of the Brazilian Labeling Program (PBE) for Commercial, Service, and Public Buildings (RTQ-C) assessed the building performance. Statistical analysis was applied to correlate the quality and thermal preference of the users from the PMV/PPD. The results showed a high rate of thermal discomfort in both environments of the studies, even when using air conditioning.

Aerosol Optical Thickness (AOT) is one of the critical factors for global atmospheric conditions, climate change, and air pollution. AOT has been exposed as a major component of air pollution in Bangladesh. This paper aims to map the seasonal distribution of AOT from 2002-2022 and to explore the internal relationship between AOT and ten air pollutants using remote sensing and machine learning tools. These ten air pollutants are Particulate matter (PM2.5), Methane (CH4), Carbon monoxide (CO), Nitrogen dioxide (NO2), Formaldehyde (HCHO), Ozone (O3), Sulfur dioxide (SO2), Aerosol Particulate Radius (APR), Nitrogen oxide (NOx) and Black carbon (BC). The results show that the concentrations of AOT were higher in December-January-February (mean value 0.50) and March-April-May (mean value 0.50) seasons, mostly in the central, western, and southern parts of Dhaka, Narayanganj, and Munshiganj districts. AOT was a bit less in June-July-August (mean value 0.33) and September-October-November (mean value 0.37). This paper also revealed that the AOT was correlated positively with PM2.5 (0.60), CH4 (0.80), NO (0.76), and BC (0.83) while correlated negatively with CO (-0.66), HCHO (-0.16), SO2 (-0.41), APR (-0.48), and NOx (-0.20). From the machine learning, the Rational quadratic GPR (RME-0.0024, MAE-0.0015, R2-0.96), Matern 5/2 GPR (RMSE-0.0023, MAE-0.0015, R2-0.96), and Squared Exponential GPR (RMSE-0.0015, MAE-0.0015, R2-0.96) were found good classifiers to predict AOT. UN agencies, government line departments, and local and regional development councils for air pollution mitigation and long-term protective measures may use the paper's key results.

The genetic development of commercial broiler led to body misconfiguration and consequent walking disabilities, mainly at the slaughter age. The present study aimed to identify broiler locomotion ability using image analysis automatically. A total of 40 broiler 40 d-old were placed to walk on a specially built runway, and their locomotion was recorded. An image segmentation algorithm was developed, and the coordinates of the bird's center of mass were extracted from the segmented images for each frame analyzed, and the Unrest Index (UI) was applied. We calculated the center of mass's movement of the broiler walking's lateral images, therefore, capturing the bird's displacement speed in the onward direction. Results indicated that broiler speed on the runway tends to decrease with the increase of the gait score. The locomotion did not differ between males or females. The proposed algorithm was efficient if predicting the broiler gait score based on their displacement speed.

Seaweeds have been the target of much attention due to the known bioactivities of some of their compounds. Although many studies about the application of seaweeds in various areas are available, these data are mostly about the raw extracts and not about specific compounds, such as seaweeds pigments. Moreover, the fungal infections of the skin, nails and hair caused by dermatophytes, are the most common fungal infections in humans. These pathologies require long periods of topical and/or systemic treatment that are associated with adverse effects and contraindications. This study had two objectives, the first was to evaluate the possibility of isolating and characterizing the pigments of Calliblepharis jubata and Fucus vesiculosus; the second was to assess their antifungal activity. The extraction of pigments was performed using a method of extraction by exhaustion; the purification was carried out by column chromatography. Three techniques were used to characterize the pigments, thin layer chromatography (TLC), UV-visible spectrophotometry and Fourier-transform infrared spectroscopy (FTIR). The antifungal activity was evaluated using the micro-dilution method, following the EUCAST international standards, on three dermatophytes, Trichophyton rubrum, Trichophyton mentagrophytes and Microsporum canis. It was possible to observe that the extract obtained from the seaweed C. jubata and F. vesiculosus, corresponding to the purified pigment phycobiliprotein, and the crude extract, an enriched extract, obtained from the seaweed C. jubata showed antifungal activity against the three fungal agents of human skin infection.

As use of composite materials increases, the search for suitable automated processes gains relevance to guarantee production quality by ensuring uniformity of the process, minimizing the amount of generated scrap and reducing time and energy consumption. Limitations on production by traditional means such as hand lay-up, vacuum bagging and in-autoclave methods, tend not to be as efficient when the size and shape complexity of the part being produced increases, motivating the search for alternative processes such as the Automated Tape Laying (ATL). This work aims to describe the process of modelling and simulating a composite ATL with in situ consolidation by characterizing the machine elements, using the finite differences method in conjunction with energy balances, in order to create a digital twin of the process for further control design. The modelling approach implemented is able to follow the process dynamics when changes to the heating element are imposed as well as to predict the composite material temperature response, making it suitable to work as a digital twin of a production process using an ATL machine.

Background: Heart failure is a major cause of morbidity and mortality worldwide; left ventricular diastolic dysfunction plays a leading role in this clinical context. Diastolic dysfunction may be predisposed by increased abdominal fat and, consequently, increased pericardial and epicardial adiposity. This study aimed to determine whether pericardial and epicardial fat are associated with left ventricular diastolic function. Methods: 82 patients had their abdominal circumference measured and underwent transthoracic echocardiography to measure the thickness of pericardial and epicardial fat and assess the left ventricular diastolic function. Two groups were created based on mean pericardial fat thickness (4.644 mm) and were related to abdominal circumference and echocardiographic parameters. Results: Subjects in the PF High group showed a significant decrease in septal e' (p&lt;0.0001), lateral e' (p&lt;0.0001) and E/A ratio (p=0.003) and a significant increase in E/e' ratio (p&lt;0. 0001), E wave deceleration time (p=0. 013), left atrial volume (p&lt;0.0001), LV mass (p=0.003), tricuspid regurgitant jet velocity (p&lt;0.0001) and LV diameter (p=0.014) compared to the PF Low group. Conclusions: Measurement of abdominal circumference, pericardial and epicardial fat is an early indicator of diastolic changes with transthoracic echocardiography being the gold standard exam.

The Paris Agreement aims to limit global warming, and one of the most pollutant sectors is heavy industry, where cement production is a significant contributor. This work briefly explores some alternatives: recycling, reducing clinker content, waste heat recovery, and carbon capture, discussing their advantages and drawbacks. Then, it examines the economic viability and benefits of increasing oxygen concentration in the primary burning air from 21% to 27%, which could improve clinker production by 7%, and the production of hydrogen through PEM electrolysis to make up 5% of the fuel thermal fraction, both on a cement plant producing 3000 tons of clinker per day. It is concluded that oxygen enrichment can provide substantial fuel savings for a relatively low cost despite a possible significant increase in NOx emissions. By opposition, hydrogen production at this scale does not appear economically viable.

Adaptive mechanisms, such as channel hopping and packet replication, are used in low-power wireless networks to deal with the spatial and temporal variations in the link quality, and meet the reliability requirements of industrial applications (i.e., PDR>99%). However, the benefits of such mechanisms are limited and may have a large impact on end-to-end latency and energy consumption. Hence, in this paper we propose using adaptive modulation diversity, which allows to dynamically select different modulations, to improve link reliability. We present three adaptive modulation diversity selection strategies and validate them using the data derived from a real-world deployment using the IEEE 802.15.4g SUN modulations (i.e., SUN-FSK, SUN-OQPSK and SUN-ODFM) in an industrial environment. The results show that by using adaptive modulation diversity it is possible to improve link reliability regardless of node conditions.

According to a recent study by OpenAI, Open Research, and the University of Pennsylvania, large language models (LLMs) based on artificial intelligence (AI), such as Generative Pretrained Transformers (GPTs), may have potential implications on the job market, specifically regarding job occupations that demand writing or programming skills. The research points out Interpreters and Translators as one of the main job occupations with greater exposure to AI in the US job market (76.5%). This article, following a mixed-methods survey-based research, provides insights into the Portuguese Language Service Providers (LSPs) awareness and knowledge about AI, specifically regarding neural machine translation (NMT) and large language models (LLM), its actual use and usefulness, as well as their potential influence on work performance and labour market. The results show that most professionals are unable to identify if AI and/or automation technologies support the tools that are most used in the profession. The usefulness of AI is essentially low to moderate and the professionals who are less familiar with it and less knowledgeable also demonstrate lack of trust in it. Two thirds of the sample estimate negative or very negative effects of AI in the profession, expressing as main concerns the devaluation and replacement of experts, the reduction of income, and the reconfiguration of the career of translator to mere post-editors.

The study of photonic crystals has emerged as an attractive area of research in nanoscience in the last years. In this work we study the properties of a two-dimensional photonic crystal composed of dielectric rods. The unit cell of the system is composed of six rods organized on the sites of a C6 triangular lattice. We induce a topological phase by introducing an angular perturbation ϕ in the pristine system. The topology of the system is then determined by using the so-called k.p perturbed model. Our results show that the system presents a topological and a trivial phases, depending on the sign of the angular perturbation ϕ. The topological character of the system is probed by evaluating the electromagnetic energy density and analyzing its distribution in the real space, in particular on the maximal Wyckoff points. We also find two edge modes at the interface between the trivial and topological photonic crystals, which present a pseudospin topological behavior. By applying the Bulk-Edge correspondence, we study the pseudospin edge modes and conclude that they are robust against defects, disorder and reflection. Moreover, the localization of the edge modes leads to the confinement of light and the interface behaves as a waveguide for the propagation of electromagnetic waves. Finally, we show that the two edge modes present energy flux propagating in opposite directions, which is the photonic analogue of the quantum spin Hall effect.

Spatial modeling in Geographic Information Systems (GIS) always involves choices. The existence of constraints, either of a financial nature or related to the specifics of the software itself, to the algorithms, the uncertainty and even the reliability of the data, the purposes and the applications of the studies, make this a kind of guiding compass for GIS analysts. Building on a previous exercise of data acquisition (check-ins) based on two Digital Social Networks (DSN—Facebook and Foursquare) and on the awareness of the use of voluntary geographic information generated by tourists sharing their topophilic ties through DSN, the present analysis aims to evaluate the contribution of modern techniques of spatial analysis applied to tourism in the “Alta and University of Coimbra” area. Concepts and procedural tasks related to density determination, cluster analysis and identification of patterns associated with regionalized variables have thus been implemented with the purpose of evaluating and comparing the results obtained through the application of two techniques of spatial analysis, Kernel Density Estimation (KDE) and Optimized Hot-Spot Analysis (OHSA) & Inverse Distance Weighting (IDW) Interpolation.

The major industrial cities of Bangladesh are heavily experiencing air pollution-related problems due to the increased trend of Particulate Matter (PM2.5) and other pollutants. This paper aimed to investigate and understand the relationship between PM2.5 and land use and climatic variables and to identify the riskiest area and population groups using a Geographic information system and regression analysis. The results show that about 41% of PM2.5 concentration increased within 19 years (2002-2021) in the study area, while the highest concentration of PM2.5 was found from 2012 to 2021. The concentrations of PM2.5 were higher over barren lands, forests, croplands, and urban areas. About 64%, 62.7%, 57%, and 55% concentrations were increased annually over barren lands, forests, cropland, and urban regions, respectively, from 2002-2021. The highest concentration level of PM2.5 (84 mg m-3) among other land use classes was found in urban areas in 2021. The regression analysis shows that air pressure (r2= - 0.26), evaporation (r2= - 0.01), humidity (r2= - 0.22), rainfall (r2= - 0.20), and water vapor (r2= - 0.03) were negatively correlated with PM2.5. On the other hand, air temperature (r2= 0.24), ground heat (r2= 0.60), and wind speed (r2= 0.34) were positively correlated with PM2.5. More than 60 Upazilas were the most polluted areas, with 1,948,029 populations (ages 0-5), 485,407 (ages 50-69), and a total population of 11,260,162 were in the high-risk/hotspot zone. The government line department may use the main results paper's key results, policymakers, stainable development practitioners, academicians, and others for integrated air pollution mitigation and management in Bangladesh and other geographical settings worldwide.

In order to study the burrowing crab Neohelice granulata (Dana, 1851) in the northern limit of its distribution and to test the hypothesis that mesoscale factors are more deterministic than latitudinal variation in this crab life history, the population dynamics of this specie was studied in the Caceribú river (Rio de Janeiro state, Brazil). The sex ratio was female-biased over the year. Males were significantly larger (t-test = 3.53, p < 0.05) than females (CW mean = 29.14 mm and 27.32 mm, respectively), which were predominant in the intermediary-size classes. The breading season took place from February to November, with a peak in May. The recruitment was observed all over the year, but mostly from October to December. The size at maturity was estimated at 19.0 mm for females and 23.9 mm for males. Average fecundity was 20,419 eggs (±12,627.12) and showed a decrease from the first to the last stage of embryonic development. The asymptotic size was similar between males (CW∞ = 24.86 mm) and females (CW∞ = 24.50 mm). Longevity was estimated in 1.33 and 1.23 years in males and females, respectively. Mortality rates were slightly higher in males (Z = 3.71) than in females (Z 0 3.41). Analysing the results of this study and the literature we conclude that the population dynamics of N. granulata do not follow a latitudinal trend. This strengthens the hypothesis that brachyurans’ life histories are mainly driven by mesoscales factors than latitudinal variation.

Monitoring lakes in high-latitude areas can provide a better understanding of freshwater systems sensitivity and accrete knowledge on climate change impacts. Phytoplankton are sensitive to various conditions: warmer temperatures, earlier ice-melt and changing nutrient sources. Satellite imagery can monitor algae biomass over large areas. The detection of chlorophyll a (chl-a) concentrations in small lakes is hindered by the low spatial resolution of conventional ocean colour satellites. The short time-series of the newest generation of space-borne sensors (e.g. Sentinel-2) is a bottleneck for assessing long-term trends. Although previous studies have evaluated the use of high-resolution sensors for assessing lakes' chl-a, it is still unclear how the spatial and temporal variability of chl-a concentration affect the performance of satellite estimates. We discuss the suitability of Landsat (LT) 30-m resolution imagery to assess lakes' chl-a concentrations under varying trophic conditions, across extensive high-latitude areas in Finland. We use in situ data obtained from field campaigns in 19 lakes and generate remote sensing estimates of chl-a, taking advantage of the long-time span of the LT 5 and 7 archives, from 1984 to 2017. Our results show that linear models based on LT data can explain approximately 50 % of the chl-a interannual variability. However, we demonstrate that the accuracy of the estimates is dependent on the lake's trophic state, with models performing in average twice as better in lakes with higher chl-a concentration (> 20 µg/l) in comparison with less eutrophic lakes. Finally, we demonstrate that linear models based on LT data can achieve high accuracy (R2 = 0.9; p-value < 0.05) in determining lakes' annual mean chl-a concentration, allowing the mapping of the trophic state of lakes across large regions. Given the long time-series and high spatial resolution, LT-based estimates of chl-a provide a tool for assessing the impacts of environmental change.

Magnetic resonance elastography (MRE) has revealed sexual dimorphism in brain stiffness in healthy individuals and multiple sclerosis (MS) patients. In the animal model of MS, experimental autoimmune encephalomyelitis (EAE), we showed previously that inflammation-induced brain softening was associated with alterations of the extracellular matrix (ECM). However, it remained unclear whether the brain ECM presents sex-specific properties that can be visualized by MRE. Therefore, we aimed here at quantifying sexual dimorphism in brain viscoelasticity in association with ECM changes in healthy and inflamed brains. Multifrequency MRE was applied to the midbrain of healthy and EAE mice of both sexes to quantitatively map regional stiffness. To define differences in brain ECM composition, gene expression of the key basement membrane components laminin (Lama4, Lama5), collagen (Col4a1, Col1a1) and fibronectin (Fn1) was investigated by RT-qPCR. We showed that the healthy male cortex expressed less Lama4, Lama5, Col4a1 but more Fn1 (all p < 0.05) than the healthy female cortex, which was associated with 9% softer properties (p = 0.044) in that region. At peak EAE, cortical softening was similar in both sexes compared to healthy tissue, with an 8% difference remaining between males and females during EAE (p < 0.001). Cortical Lama4, Lama5 and Col4a1 expression increased 2 to 3-fold in EAE in both sexes while Fn1 decreased only in males (all p < 0.05). No significant sex differences in stiffness were detected in other brain regions. In conclusion, sexual dimorphism in the ECM composition of cortical tissue in the mouse brain is reflected by in vivo stiffness measured with MRE and should be considered in future studies by sex-specific reference values.

The objective of this work is to evaluate and compare the levels of bioactive compounds in basil leaves (Ocimum basilicum), fresh and after thermal drying processing freeze-dried, using methodological procedures that follow internationally recommended and accepted standards. Fresh basil leaves had 9.50 -63.3 mg/100g (vitamin C), 1.8 -3.9 mg EAG/g (total polyphenols), 0.73-1.78 mg/g (flavonoids), 2287.8-1003,8 μg/100g (chlorophyll a), 2606-2287 μg/100g (chlorophyll b), 16.71-20.6 (total carotenoids).Regarding color, there was variation in the parameters L*, a* and b* of the dry sample, but maintained the tendency towards green e (a+) and yellow (b-). Infrared analysis (FTIR) demonstrated the presence of functional groups related to cellulose, hemicellulose and lignin, confirmed by micrography (SEM) with visualization of plant parenchyma residues and fiber bundles. Thermogravimetry (TG/DTG) shows stability in the range of 234 °C, showing more intense mass loss at 294.6 °C. Given the data, it is possible to infer that basil is little affected by freeze-drying, with few changes in bioactive compounds, chemical groups and with good thermal stability. Thus, the application of the freeze-drying technique is a viable alternative to the commercialization of basil leaves, prolonging their useful life and increasing the forms of food applications.

Most research on colostrum quality and colostrum management focuses on maternal IgG transfer to the newborn calf. However, in addition to being a source of antibodies, colostrum has other components that influence passive immune transfer, nutrition, gut maturation, and thermoregulation. In this review, the constituents in the bovine colostrum, as well as their variation, are explored and it is discussed the biological role of colostrum on the newborn calf. Protein is the nutrient in higher concentration and fat is the nutrient with the most variation. There is a pronounced amplitude in the total solids content of colostrum, but the average concentration does not vary much between studies (24.7%). Bovine colostrum major components can vary with several factors, such as the region, season, breed, dry period length, and nutritional aspects of the dam. Bioactive components, cells, and microbiome variability are less understood, besides IgG. Regardless, they play crucial distinct roles in the physiological development of the newborn. However, a multi-interactive effect between these components, cells, and microorganisms is more likely to occur. Recently researched components in colostrum like miRNA, nucleo(t)sides, the milk fat globule membrane, oligosaccharides, minor proteins, and the microbiome are examples of promising interest areas of study.

Agricultural crops productivity is heavily influenced by the strength of their seeds. Current methods for testing seed vigor, such as the germination rate and tetrazolium test, rely on time-consuming human visual inspections. Computer Vision, a crucial technology in smart production processes, offers an automated alternative and is increasingly applied in digital agriculture processes. Here we propose a method that combines YOLOv8 and morphological analysis of seeds using X-ray images to aid seed quality analysts in classifying seed lots based on their physiological potential. We examined the internal morphology of three seed lots and generated X-ray images to train a YOLOv8-based model with a post-segmentation module. This model assessed various parameters such as the total seed area, area filled by the embryo and endosperm, length, width, and calculated the percentage occupied by the embryo and endosperm in relation to the total seed area. Subsequently, seeds were classified into four categories based on the internal area occupied by the endosperm and embryo. Our findings reveal the robust performance of the YOLOv8 model in segmenting and classifying despite the challenges posed by a relatively small dataset. Notably, the proposed model achieved an impressive accuracy of up to 95.6% in identifying and segmenting the endosperm over 1,500 epochs with just 15 training images. The endosperm/seed area ratio, particularly within the 50-60% range covering over 50% of the samples, emerged as a significant metric for evaluating the viability of seed batches.

Due to satisfactory mechanical properties, low specific weight and other advantages, a substantial utilization of laminated structural composites in many components and equipments of several industry sectors, especially in the past two decades, has been made. This class of materials has a good potential to be an important ally to support scientists and engineers with the main current world challenge: an energy transition process that must occur with sustainability, eco-friendly materials and based on an efficient reduction of greenhouse gas emissions. In this context, a microanalysis (scale length: 10μm to 1mm) of mechanical behavior that considers the multiphase characteristics, at leastwise a matrix and a reinforcement phase, of this kind of composites must be explored, i. e., a heterogeneous material is assumed to predict, for example, the effective tensors of stiffness or compliance by a homogenization process, modeling to damage analyses, studies about progressive delamination and other specific aspects of a composite can be previously investigated using micromechanical approaches. Therefore, the understanding of fundamental micromechanics as well as some advanced models are essential to apply these materials in structural industry components. In this sense, this systematic literature review is designed to investigate the main basic and advanced models of laminated composites micromechanics and using this overall study, have been developed, in the end, an analysis of research trends to the topic, in which, lines to future researches are indicated.

In the present work, a portable device system applied in the detection and classification of different metallic ions was proposed and developed, aiming at its application in the monitoring of hydrological systems like rivers, lakes and groundwater. Considering the system features, a portable colorimetric system was developed by using a multispectral optoelectronic sensor. All the technology of quantification and classification of metallic ions using Optoelectronic Multispectral sensors was fully integrated in the embedded hardware FPGA technology and software based on virtual Instrumentation (NI LabView ®). The system was used as a colorimeter by using the chromogen reagent of 1-(2-pyridylazo)-2-naphthol (PAN) as an indicator and the results obtained together with the signal processing and pattern analysis using the method of the linear discriminant analysis, allowed to obtain excellent results in detection and classification of Pb(II), Cd(II), Zn(II), Cu(II), Fe(III) and Ni(II) ions, with almost the same level of performance in relation to those obtained from the UV-VIS spectrometers of high spectral resolution.

Autism Spectrum Disorder (ASD) is a neurodevelopmental condition, characterized by persistent deficits in communication/social interaction and restricted and repetitive patterns of behavior, interests or activities. It is usually identified in childhood, despite late diagnoses in cases of greater functionality. Havighurst proposes a set of fundamental tasks throughout the life cycle, whose achievement is probably compromised in the ASD, even though it lacks scientific evidence. This study innovates, as it is based on Havighurst's theoretical model for understanding the development process of three adults and one young person, diagnosed with ASD level I, at different life stages. Through the methodology of life histories, interviews were subject to content analysis. Results pointed out the early detection and interventions importance, minimizing adversities, above all by those who had late diagnoses. Self-perceived success, not expected, was found in some development tasks (e.g. conscience and morality development). Also were noticed expected limitations related to ASD (e.g. difficulties in relationships with peers and in the labor market inclusion). Probably, in cases of greater severity and less functionality/autonomy, there would be greater failure in development tasks. It is crucial to improve research on this developmental model and on the factors that delay the diagnosis, including cases of different levels of severity.

This research aimed, within the scope of the anthropotechnological approach, analyze the technology transfer, performed via the offset policy in the field of public health, called the Radiotherapy Expansion Plan, from the Health Ministry. The objective of this policy is to create and improve accredited organizations, concerning the oncological treatment, specifically in the insertion of radiotherapeutic equipment. This process is divided into two stages: the insertion of the radiotherapy equipment, and the compensations provided for in the commercial agreement. To meet this purpose, the research started from understanding the theoretical and methodological approaches of the fields of study of anthropotechnology, technology transfer and offset policy. In this sense, there was used the methodological strategy of the case study, supported by applied research, with a qualitative and exploratory approach. External and internal environments of a specific situation were analyzed, located in the State of Paraná, which received the radiotherapy equipment. It was verified that the initiatives of insertion of radiotherapeutic equipment in the context of the Expansion Plan have undergone numerous confrontations, inserted in the contextual and organizational particularities that affect its development and effectiveness. There are challenges that require responses from a set of organizations involved, in order to implement the trade agreement established by the offset policy, highlighting the first stage as a process of technology transfer. Thus, the situation located in the State of Paraná consistently consolidated the insertion of the radiotherapy equipment. It allowed its disclosure as a reference situation, and based on the dimensions and indicators analysis provided by anthropotechnology, made possible the comprehensionof the technology transfer involved in the process.

Skin pigmentation ensures efficient photoprotection and relies on the pigment melanin, which is produced by epidermal melanocytes and transferred to surrounding keratinocytes. While the molecular mechanisms of melanin synthesis and transport in melanocytes are now well characterized, much less is known about melanin transfer and processing within keratinocytes. Over the past few decades, distinct models have been proposed to explain how melanin transfer occurs at the cellular and molecular levels. However, this remains a debated topic as up to four different models have been proposed, with evidence presented supporting each. Here, we review the current knowledge on the regulation of melanin exocytosis, internalization, processing and polarization. Regarding the different transfer models, we discuss how these might co-exist to regulate skin pigmentation under different conditions, i.e. constitutive and facultative skin pigmentation or physiological and pathological conditions. Moreover, we discuss recent evidence that sheds light on the regulation of melanin exocytosis by melanocytes and internalization by keratinocytes, as well as how melanin is stored within these cells in a compartment that we proposed to be named melanokerasome. Finally, we review the state of the art on the molecular mechanisms that lead to melanokerasome positioning above the nuclei of keratinocytes, forming supranuclear caps that shield the nuclear DNA from UV radiation. Thus, we provide a comprehensive overview of the current knowledge on the molecular mechanisms regulating skin pigmentation, from melanin exocytosis by melanocytes and internalization by keratinocytes, to processing and polarization within keratinocytes. A better knowledge of these molecular mechanisms will clarify long lasting questions in the field that are crucial for the understanding of skin pigmentation and can shed light on fundamental aspects of organelle biology. Ultimately, this knowledge can lead to novel therapeutic strategies to treat hypo- or hyper-pigmentation disorders, which have a high socio-economic burden to patients and healthcare systems worldwide, as well as having cosmetic applications.

The crystal structure of a polymorph of Glycyl-L-alanine HI.H2O was synthesized from chiral cyclic Glycyl-L-alanine dipeptide, known to show molecular flexibility in different environments. The space group is polar (P21) and therefore pyroelectricity and optical second harmonic generation properties are allowed by symmetry. We report a pyroelectric coefficient as high as 45 µC/m2K occurring at 345 K, one order of magnitude smaller than the semi-organic ferroelectric Triglycine Sulphate (TGS) crystal. Furthermore, the polymorph displays a nonlinear optical effective coefficient of 0.14 pm/V, around 14 times smaller than the value from a phase-matched inorganic Barium Borate (BBO) single crystal.

Leaf springs are critical components for the railway vehicle safety in which they are installed. Although these components are produced in high-strength alloyed steel and designed to operate under cyclic loading conditions in the high-cyclic fatigue region, their failure is still possible to occur and hence lead to economic and human catastrophes. The aim of this document is precisely to characterise the mechanical crack growth behaviour of the 51CrV4 spring steel representative of leaf springs under cyclic conditions, that is, crack propagation in mode I. The common fatigue crack growth prediction models (Paris and Walker) considering the effect of stress ratio and parameters such as propagation threshold, critical stress intensity factor and crack closure ratio are also determined using statistical methods, which resulted in good approximations with respect to the experimental results. Lastly, the fracture surfaces under the different test conditions were analysed using SEM, with no significant differences to declare. As a result of this research work, it is expected that the developed properties and fatigue crack growth prediction models can assist design and maintenance engineers in understanding fatigue behaviour in the initiation and propagation phase of cracks in leaf springs for railway freight wagons.

The purpose of this disquisition is to analyze bullfighting, its advances and setbacks at a global and local level in terms of animal law. It was developed as a descriptive documentary research with a non-experimental design, using the observation and interpretation of documents related to the subject, from the global level, to the local, the national, specific to the regions and communities, being interpreted through the hermeneutic method. In the analysis, results were reached such as: every day more countries are willing to assume that bulls, because they are living beings that feel, are being attended to from the legal and the ethical, propitiating changes in the way of thinking of people in terms of wanting to consider bullfighting, a sport, art and hobby considered cultural heritage of many countries. For this reason, different actions have been generated from surveys, to define the acceptance or not of these events. It is concluded that there are important advances in this regard, as bullfighting is being prohibited in different parts of the world, taking into account the protection that protects animals, but the laws do not establish specific prohibition in this regard worldwide.

Textile industry is one of the major industries responsible for environmental pollution globally. This is mainly due to the use of synthetic dyes, toxic ingredients and solvents for dy-ing/treatments/protocols of textiles. Replacement of those non ecofriendly ingredients would be a very challenging target to develop novel sustainable textile dying strategies. Using biobased and bioactive pigments, antibacterial ingredients and especially natural solvents are recently pointed out as substances to included in the related formulations. In this study the dyeing ability of the crude gel prodigiosin produced by non-pathogenic bacteria Serratia plymuthica as a natural pigment was investigated on various multifiber fabrics at different condition (temperature and pH) and by using salts (NaOH and Na2S2O4) and alternative mordants (a conventional: FeSO4 and a new bio-mordant: L-Cysteine (L-Cys)) in the recipes with different compositions and especially replacing of organic solvent with a new type of gel-based Choline chloride (ChCl) : Lactic acid (LA) (1 : 2) deep eutectic solvents (DES) as a dyeing medium. For determination of the dying process performances, the color strength (K/S value) of dyed fabric and the dyeing equalization (dE) parameters were evaluated. The fastness properties of the dyed fabrics which displayed as a higher K/S value and good dE were evaluated. The nylon fabrics dyed with 3.0% owf L-Cys at pH = 8.3 improved the color fastness to washing, while the gel-based ChCl : LA (1 : 2) DES dyebath provided a better color fastness to light. Moreover, the nylon fabrics under these conditions exhibited remarkable anti-microbial activity against Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). As conclusion, the use of the crude gel prodigiosin pigment revealed an advantageous ability to dye the textile materials, responding to consumers' demand for more ecological and sustainable products. Furthermore, the natural reducing agent L-Cys, never tested before as a bio-mordant, and the use of gel-based DES as a dyeing medium demonstrated enhanced colorimetric and antibacterial properties on dyed nylon with crude gel prodigiosin pigment.

This research presents a novel algorithmic implementation to improve the analysis of visually controlled interception and accompanying motor action through the computational application of harmonic ratios and stimulation invariants. Unlike traditional models that focus mainly on psychological aspects, our approach integrates the relevant constructs into a practical mathematical framework. This allows for dynamic prediction of interception points with improved accuracy and real-time perception-action capabilities, essential for applications in neurorehabilitation and virtual reality. Our methodology uses stimulation invariants as key parameters within a mathematical model to quantitatively predict and improve interception outcomes. The results demonstrate the superior performance of our algorithms over conventional methods, confirming their potential for ad-vancing robotic vision systems and adaptive virtual environments. By translating complex theo-ries of visual perception into algorithmic solutions, this study provides innovative ways to im-prove motion perception and interactive systems. This study aims to articulate the complex inter-play of geometry, perception, and technology in understanding and utilizing cross-ratios at infin-ity, emphasizing their practical applications in virtual and augmented reality settings.

The aim of this study was to compare the screw removal torque of mini conical prosthetic components and straight trunnion of indexed morse taper implants, after mechanical cycling. The sample consisted of 40 implants and 20 mini-conical prosthetic components (MC group) and 20 straight trunnion components (ST group). Each group consisted of 10 specimens, with 2 implants in each, and cobalt-chromium metallic crowns were screwed into each sample. The components of the MC group received a torque of 20 N.cm with a digital torque wrench and after 10 minutes were retightened with the same value as the initial torque. The components of the ST group received a torque of 30 N.cm, with a digital torque wrench and after 10 minutes, they were retightened with the same value. The screws of the respective crowns of the two groups received a torque of 10 N.cm and after 10 minutes were retightened with the same value. Each group was subjected to the fatigue test in a mechanical cycler at 2.000.000 cycles, with a load of 250 N and frequency of 4 Hz. At the end of the fatigue test, the loosening torque of each screw of the specimens was measured through a digital torque wrench. The data were analyzed by two-way ANOVA and Tukey test. In both groups, there were loss of torque. The results showed no statistic difference between MC and ST groups.

The objective of this study was to evaluate the drying kinetics of the mass of jambu leaves and mass of jambu leaves in foam mat at different temperatures (50, 60 and 70 °C and thickness of 1.0 cm). The physicochemical characterization of the materials was performed before and after drying. Twelve different drying models were fitted to the drying kinetics data and the thermodynamic properties were calculated. The physicochemical parameters for the mass of leaves and foam after drying were moisture content from 2 to 7%, ash from 13 to 17%, protein content from 22 to 30%, lipids from 0.6 to 4% and total titratable acidity from 0.20 to 0.28% of tartaric acid. Wang & Singh and Midilli models were recommended for describing the drying kinetics. The use of foam mat promoted higher values of effective diffusion coefficient and activation energy and lower values of enthalpy and entropy, thus enhancing the reduction of drying time.

The giant challenge breeding flood-irrigated rice is to identify superior genotypes that present high-yielding with specific grain qualities, resistance to abiotic and biotic stresses, excellent adaptation to the target environment. Thus, the objectives of this study were to propose a bayesian multi-trait model, estimate genetic parameters, and select flood-irrigated rice genotypes with better genetic potentials in different evaluation environments. For this, twenty-five rice genotypes belonging to the flood-irrigated rice improvement program were evaluated. The grain yields, grain length, width and thickness, grain length, and grain width and weight of 100 grains in the agricultural year 2016/2017. The experimental design used in all experiments was a randomized block design with three replications. The Monte Carlo Markov Chain algorithm estimated genetic parameters and genetic values. The grain thickness trait was considered highly heritable, with a credibility interval ranging from: h^2: 0.9480; 0.9440; 0.8610, in environments 1, 2, and 3, respectively. The grain yields showed a low correlation estimate between grain thickness and 100-grain weight, in all environments, with a credibility interval ranging from (ρ= 0.5477; 0.5762; 0.5618 and 0.5973; 0.5247; 0.5632, grain thickness and 100-grain weight, in environments 1, 2, and 3, respectively). The Bayesian multi-trait model proved to be an adequate strategy for the genetic improvement of flood-irrigated. Genotypes 2 and 15 had similar potential in the three environments, they should be selected as high-performance multi-trait genotypes for the genetic breeding of flood-irrigated rice in the program.