Microbial community succession in raw milk determines its quality and storage period. In this study, carbon dioxide (CO2) at 2000 ppm was used to treat raw milk to investigate the mechanism of extending the shelf life of raw milk by CO2 treatment from the viewpoint of microbial colonies and metabolites. The results showed that the shelf life of CO2-treated raw milk was extended to 16 days at 4 ℃, while that of the control raw milk was only 6 days. Microbiomics analysis identified 221 Amplicon Sequence Variants (ASVs) in raw milk, and the alpha diversity of microbial communities increased (P < 0.05) with the extension of storage time. Among them, Pseudomonas, Actinobacteria and Serratia were the major microbial genus responsible for the deterioration of raw milk, with a percentage of 85.7%. A combined metagenomics and metabolomics analysis revealed that microorganisms altered the levels of metabolites, such as pyruvic acid, glutamic acid, 5'- cmp, arginine, 2-propenoic acid, and phenylalanine in the raw milk through metabolic activities, such as ABC transporters, pyrimidine metabolism, arginine and proline metabolism and phenylalanine metabolism, and reduced the shelf life of the raw milk. CO2 treatment prolonged the shelf life of the raw milk by inhibiting the abundance of Gram-negative aerobic bacteria, such as Acinetobacter guillouiae, Pseudomonas fluorescens, Serratia liquefaciens and Pseudomonas simiae.

The Himalaya is well known for high diversity and ethnobotanical uses of medicinal plants. However, not all areas of the Himalayas are well studied. In particular, studies on ethnobotanical uses of plants from the Eastern Himalayas are rare and lacking for many tribes. Past studies primarily focused on listing plants name and their traditional medicinal uses. However, studies on traditional ethnopharmacological practices on medicine preparation had not yet been reported in published literature from the Eastern Himalaya. In this study, we are reporting the first time ethnopharmacological used 24 medicines, their procedures of preparation and listed 53 plant species used for those medicines for Monpa tribe. Such documentations had not yet been done for other tribes in India. Our research demonstrates the urgent need to documents traditional medicine preparation procedures from the local healers before rapid cultural modernization forgets them in transforming country like India. This study should motivate national and international researchers to do more works on ethnopharmacology and bioprospecting.

With the rapid development of cities in northwest China, there has been an increasing focus on groundwater pollution in plateau cities, specifically the common occurrence of nitrate pollution. The special climatic, geological, and geomorphological characteristics of plateau and river valley cities contribute to distinct groundwater chemical characteristics. Therefore, the formation and evolution process of groundwater nitrate contamination differs from that of plain cities. To explore these issues, we conducted an analysis of eight major ions in various groups of water samples from rivers, springs, and groundwater in Haidong. By utilizing factor analysis and correlation analysis, we were able to identify the characteristics and formation of groundwater chemistry and nitrate pollution in Haidong. Our findings reveal that the chemical characteristics of groundwater in Haidong are primarily controlled by rock weathering, mineral dissolution, and evaporation, leading to the formation of highly mineralized groundwater. Additionally, the excessive nitrate content in certain areas is a result of domestic sewage discharge and agricultural fertilizer use, exceeding Chinese drinking water health standards. Furthermore, for cities located in valleys, the geological structure significantly impacts the nitrate content of groundwater in different regions. Areas with obstructed groundwater flow tend to have higher nitrate levels, while regions with unobstructed groundwater experience lower nitrate concentrations. Notably, shallow groundxwater is more vulnerable to nitrate pollution compared to deep groundwater. This study holds great significance in understanding the chemical characteristics of groundwater and the formation and evolution of nitrate pollution in highland river valley cities.

Contaminants of Emerging Concern (CECs), a new category of contaminants in limelight, is a major issue of global concern. The pervasive nature of CECs and its harmful effects, such as cancer, reproductive disorders, neurotoxicity etc., make the situation alarming. The perilous nature of CECs lies in the fact that even very small concentration of CECs can cause great impacts on living beings. It also has a nature of bioaccumulation. Thus, it is the ultimate need to have efficient sensors for detection of CECs to ensure safe living environment. Electrochemical sensors are an efficient platform for CEC detection as they are highly selective, sensitive, stable, reproducible, and prompt, and can detect very low concentrations of analyte. Major classes of CECs are pharmaceuticals, illicit drugs, personal care products, endocrine disruptors, newly registered pesticides, and disinfection by-products. This review focusses on CECs, including their sources and pathways, health effects caused by them, and electrochemical sensors as reported in literatures under each category for the detection of major CECs.

Taiwan developing offshore wind power to promote green energy and self-electricity production. In this study, a Light Detection and Ranging (Lidar) was set up at Chang-Hua development zone one on the sea and 10km away from the seashore. At Lidar location, WRF (3.33km & 2km grid lengths) model and WAsP were used to simulate the wind speed at various elevations. Three days mean wind speed of simulated results were compared with Lidar data. From the four wind data sets, developed five different comparisons to find an error% and R-Squared values. Comparison between WAsP and Floating Lidar was shown good consistency. Lukang meteorological station 10 years wind observations at 5m height were used for wind farm energy predictions. The yearly variation of energy predictions of traditional and TGC wind farm layouts are compared under purely neutral and stable condition. The one-year cycle average surface heat flux over the Taiwan Strait is negative (-72.5 (W/m2) and 157.13 STD), which represents stable condition. At stable condition TGC (92.39%) and 600(92.44%), wind farms were shown higher efficiency. The Fuhai met mast wind data was used to estimate roughness length and power law exponent. The average roughness lengths are very small and unstable atmosphere.

In the context of the coordinated development of digital economy and environmental protection, we take the strategy of "Broadband China" as a quasi-natural experiment, adopts the panel data of 284 cities from 2007 to 2020, and evaluates the policy effect of digital economy on total factor energy efficiency through the progressive DID model. The results show that: The construction of "Broadband China" demonstration city has significantly promoted the improvement of the total factor energy efficiency of the demonstration city, but there is also significant urban heterogeneity, which is manifested in the significant improvement of the total factor energy efficiency of the eastern city, the southern city, the big city and the non-resource-based city. It has no significant effect on the total factor energy efficiency of central and western cities, northern cities, small and medium-sized cities and resource-based cities. The construction of "Broadband China" demonstration cities can improve total factor energy efficiency by promoting technological progress and strengthening environmental regulations. Therefore, we should further strengthen the construction of digital infrastructure and give full play to its positive effects. Different cities should seek differentiated development paths based on their own resource endowments and development conditions, so that the digital economy can effectively improve the total factor energy efficiency.

For improving the tracking accuracy and model switching speed of maneuvering target tracking in nonlinear systems, a new algorithm named interacting multiple model fifth-degree spherical simplex-radial cubature filter (IMM5thSSRCKF) is proposed in this paper. The new algorithm is a combination of the interacting multiple model (IMM) filter and fifth-degree spherical simplex-radial cubature filter (5thSSRCKF). The proposed algorithm makes use of Markov process to describe the switching probability among the models, and uses 5thSSRCKF to deal with the state estimation of each model. The 5thSSRCKF is an improved filter algorithm, which utilizes the fifth-degree spherical simplex-radial rule to improve the filtering accuracy. Finally, the tracking performance of the IMM5thSSRCKF is evaluated by simulation in a typical maneuvering target tracking scenario. Simulation results show that the proposed algorithm has better tracking performance and quicker model switching speed when disposing maneuver models compared with IMMUKF, IMMCKF and IMM5thCKF.

In this study, an experiment was conducted on hoop pine (Araucaria cunninghamii), which is a common tree species in Taiwan. Holes with diameters of 4, 5, 7, 10, 12, and 14 cm were drilled in dry hoop pine timber with a diameter of 39 cm and a height of 57 cm, and an 800 MHz Ground Penetrating Radar (GPR) antenna were used to determine the minimum image resolution and the size of the holes in the wood. GPR images of the timber were subjected to a filtering process to obtain characteristic reflection curves of the damage to the timber. Curves with clear waveforms were observed in the GPR profiles of eccentric holes with a diameter of 4 cm. Profiles of the damage were obtained and profile images with the trunk radius at the centre were transformed into polar coordinate images. From these polar coordinate images, the location, size and diameter of the eccentric holes in the wood were identified, and the reflection curves were characterised by waveforms and irregular fluctuations. The risk levels of tree trunks were determined on the basis of their t/R (minimum normal wall thickness of the cross-section of the trunk/radius of the trunk) values and hole area ratios. A comparison between the GPR-based results and the actual diameters of the holes revealed that the filtered GPR profiles could be used for the efficient and accurate assessment of damage to hoop pine timber (average error rate ≤ 4%).

This study aimed to investigate the relationship between sleep duration, dementia severity, age, and ANS regulation. This cross-sectional pilot study included 27 older patients with probable Alzheimer’s disease, hospitalized at a psychiatric center. We measured heart rate variability to assess ANS regulation at night, evaluated dementia severity using the Clinical Dementia Rating scale, and obtained sleep duration data from sleep diaries maintained by psychiatric nurses. The data were analyzed using repeated-measures generalized linear models with age, sex, dementia severity, and medication (antipsychotics) as covariates. A sleep duration of 7–8 h per night was associated with better ANS regulation than other sleep durations, as indicated by sympathovagal balance (p = 0.005). ANS dysregulation was characterized by a 20.7% increase in sympathetic nervous system activity and a 14.8% decrease in parasympathetic nervous system (PSNS) activity. We found a significant correlation between dementia severity and PSNS activity (p = 0.04) and observed an inverted U-shaped association between sleep duration and ANS regulation. This pilot study demonstrated that a sleep duration of 7–8 h per night may be critical in maintaining optimal ANS regulation. Bidirectional associations between sleep duration, inadequate sleep duration, aging, and ANS regulation warrant further investigation.

Arylsulfatase and β-glucuronidase are two important enzymes in human, which play important role on dynamic equilibrium of steroidal estrogens. This work probably for the first time reported that hydrogen peroxide (H2O2), hypochlorite and peracetic acid (PAA) could effectively inhibit the activities of arylsulfatase and/or β-glucuronidase. The 50 percent of inhibitions (IC50) of H2O2, and PAA on arylsulfatase were found to be 142.90±9.00, 91.83±10.01, and 43.46±2.92 μM, respectively. The corresponding respective IC50 of hypochlorite and PAA on β-glucuronidase were 704.90±41.40 and 23.26±0.82 μM, while H2O2 showed no inhibition on β-glucuronidase. It was further revealed that the inhibition of hypochlorite on both arylsulfatase and β-glucuronidase was irreversible. On the contrary, the inhibition by H2O2 and PAA was reversible. Moreover, it was found that the inhibitions of arylsulfatase and/or β-glucuronidase by these three chemicals were pH-dependent, among which the inhibition by H2O2 was competitive and non-competitive for PAA. In general, H2O2 and hypochlorite can be endogenously produced in human, which suggested that the two compounds are potential endocrine disruption compounds (EDCs) as they can cause endocrine disruption via inhibition of arylsulfatase and β-glucuronidase. This work further indicated that any agent that can induce production of H2O2 or hypochlorite in human is potential EDC, which explains why some EDCs with very weak or no estrogenic potency can cause endocrine disruption that confirmed in epidemiological studies.

This paper first discusses a fractional-order Liu system of order as low as 2.7 and shows its chaotic characteristics by carrying out numerical simulations such as Lyapunov exponents, bifurcation diagrams and phase portraits. Then, by using the topological horseshoe theory and computer-assisted proof, the existence of chaos in the system is verified theoretically. Finally, the fractional-order system is implemented on a Field Programmable Gate Array (FPGA) and the results obtained show that the fractional-order Liu system is indeed chaotic.

As the name implies, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a single-stranded RNA virus and a member of the corona virus family, primarily affecting the upper respiratory system and the lungs. Like many other respiratory viruses, SARS-CoV-2 can spread to other organ systems. Apart from causing diarrhea, another most common but debilitating complication caused by the SARS-CoV-2 is neurological symptoms and cognitive difficulties, which occur in up to two thirds of hospitalized covid patients and ranging from shortness of concentration, overall declined cognitive speed to executive or memory function impairment. Neuro-cognitive dysfunction and “brain fog” are frequently present in COVID-19 cases, which can last several months after the infection, leading to disruption of daily life. Cumulative evidence suggests that SARS-CoV-2 affects vasculature in the extra pulmonary systems directly or indirectly, leading to impairment of endothelial function and even multi-organ damage. The post COVID-19 long-lasting neurocognitive impairments have not been studied fully; and the underlying mechanism remains elusive. In this review, we summarize the current understanding of the effects of COVID-19 on vascular dysfunction and how vascular dysfunction leads to cognitive impairment in patients.

The movement of liquid droplets on the energy gradient surface has attracted extensive attention. Inspired by biological features in nature, such as the periodic spindle-shaped nodes in spider silks and conical-like barbs of cacti, the structure-property-function relationship of multifunctional gradient surfaces. In this study, a series of specific patterns are fabricated by 3D printing technology, followed by modification via the atmospheric pressure plasma treatment and liquid phase chemical deposition, resulting in enhancing the ability of water droplets of 5μL to travel 18.47mm on a horizontal plane and 22.75mm against gravity up to 20° tilting angle. Additionally, analysis techniques have been employed including contact angle analyzer, ESCA and laser confocal microscope to evaluate the sample performance. This work could further be applied to many applications related to microfluidic devices, drug delivery and water/fog collection.

Background: Existing human cell immortalization methods made the cells obtain oncogenesis phenotype and/or caused the cells gain and/or lose chromosomes. Immortalized normal human T cells lines provide critical in vitro models for basic research and therapeutic products development.Methods: We utilized a CRISPR/Cas9 system to replace a single copy of the exon 2 of the cell cycle inhibitor gene CDKN2A (encoding p16 and p14 proteins) with a single copy of human telomerase reverse transcriptase (hTERT) to immortalize human primary CD8⁺ T cells (hCD8⁺T-TERT). By using Cas9 protein and low donor DNA copies/cell, we successfully immortalized hCD8⁺T cells with a single copy of hTERT transgene, which also avoided uncontrolled insertion of Cas9 gene and guide RNA vector.Results: Human primary CD8+ cells were immortalized and expanded more than 2.6 × 10⁷ times. Characterization of the cells revealed that the immortalized CD8⁺ T-TERT cells retained most of the cell surface markers and normal karyotype. The CD8⁺ T-TERT cells also retained the dependence of IL-2 and CD3/CD28 activator for survival and expansion.Conclusion: we established a stable immortalized CD8⁺ T cell line that had a phenotype consistent with T cells and will be a useful research model.

Data can be illustrated in shapes, and the shapes could provide insight for data modeling and information extraction. Topological data analysis provides an alternative insight in biomedical data analysis and knowledge discovery with the algebra topology tools. In present work, we study the application of topological data analysis for personalized electrocardiographic signal classification toward arrhythmia analysis. Using phase space reconstruction technique, the signal samples are converted into point clouds for topological analysis facility. With topological techniques the persistence landscapes from the point clouds are extracted as features to perform the arrhythmia classification task. We find that the proposed method is robust to the training set size, with only a training set size of 20% percents, the normal heartbeat class are 100% recognized, ventricular beats for 97.13%, supra-ventricular beats for 94.27% and fusion beats for 94.27% within the corresponding experiments. The property of keeping high performance when using smaller training sample proves that the proposed method is especially applicable to personalized analysis. With the present study, we show that the topological data analysis technique could be a useful tool in biomedical signal analysis, and provide powerful ability in personalized analysis.

Neuronal cells are believed to rely on autophagy to maintain cellular homeostasis. Nevertheless, autophagy may be a therapeutic target for neurodegenerative diseases because of the role it plays in neuronal cell death. Despite Beclin 1 association with autophagy and apoptosis, the molecular mechanisms that underlie Tau-induced vesicular pathology and Tau protein aggregates in humans remain poorly understood. Here, we set out to examine the role of three genes-ATG14L, Beclin 1 and VPS34- in autophagy nucleation failure-associated Tau disorders in fruit fly models. We found that either reduced ATG14L levels improve neuronal outcomes, or transgenic expression of ATG6/Beclin 1 greatly reduced age-dependent neurodegeneration and Tau pathology; whereas, the loss of Beclin 1 exacerbated these effects. Prior to p-Tau accumulation, the neuronal Beclin 1 network is critical for reducing p-Tau accumulation, indicating that the loss of Beclin 1 causes Tau pathology and neurodegeneration. As neurodegeneration progressed, glial cells showed an upregulation of vesicular Beclin 1 immunoreactivities. The reduced VPS34 also resulted in p-Tau accumulation, suggesting that neurons require both Beclin 1 and VPS34 to reduce p-Tau accumulation. Our results provide mechanistic insight into the molecular pathways that cause age-dependent Tau pathology and neurodegeneration due to an excess of autophagy nucleation processes and autophagy activity, and we derive novel inferences on the therapeutic possibilities of rebalanced Beclin 1 network by reducing autophagic specific nucleation component of ATG14L.

The core of eLoran ground-based timing navigation system is the accurate measurement of groundwave propagation delay. However, meteorological changes will disturb the conductive characteristic factors along the groundwave propagation path, especially for complex terrestrial propagation environment, and may even lead to microsecond-level propagation delay fluctuation, seriously affecting the timing accuracy of the system. Aiming at this problem, this paper proposes a propagation delay prediction model based on Back-Propagation neural network (BPNN) for complex meteorological environment, which realizes the function of directly mapping propaga-tion delay fluctuation through meteorological factors. Firstly, the theoretical influence of meteoro-logical factors on each component of propagation delay is analyzed based on calculation parame-ters. Then, through the correlation analysis of the measured data, the complex relationship be-tween the seven main meteorological factors and the propagation delay, as well as their regional differences are demonstrated. Finally, a BPNN prediction model considering regional changes of multiple meteorological factors is proposed, and the validity of the model is verified by long-term collected data. Experimental results show that the proposed model can effectively predict the propagation delay fluctuation in the next few days, and its overall performance is significantly improved compared with the existing linear model and simple neural network model. eLoran; meteorological factor; propagation delay prediction model; Back-Propagation neural network;

This study presents an innovative analytical method for the detection and quantification of 14 β-agonists in pork using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The method involves the use of a solid phase microextraction (SPME) probe, consisting of a wooden tip coated with polyacrylonitrile (PAN) and molecularly imprinted polymer (MIP). This probe has been integrated into an automated extraction device, designed in our laboratory to extract the target analytes prior to LC-MS/MS analysis. Compared to the traditional solid-phase extraction (SPE) procedure, the proposed approach significantly reduces the costs related to adsorbent ma-terial and solvent consumption, and shortens purification time, thereby reducing both the tech-nical workload and associated expenses. The methodology has been carefully validated in ac-cordance with the National Standard of the People's Republic of China (GB/T 22286-2008), evalu-ating key parameters including the limit of detection (LOD), limit of quantification (LOQ), matrix effects, linearity, and both intra-day and inter-day precision. The average recovery rates for all β-agonists were observed to lie between 71.6% and 82.2%, with relative standard deviations (RSDs) consistently below 15% for both types of precision. The LOD and LOQ values were found to range from 0.09 to 0.39 μg/kg and 0.27 to 0.99 μg/kg, respectively. In terms of accurate detection of positive samples, the developed method demonstrated a closer approximation to the true value of the sample compared to the National Standard method GB/T 31658.22-2022. Overall, the proposed method exhibits substantial promise for the routine assessment of β-agonists in pork and presents a practical alternative for compliance monitoring in regulatory settings.

In this study, the hot deformation of Cu-0.55Sn-0.08La (wt%) alloy was studied by gleeble-3180 testing machine at deformation temperatures of 400-700oC and various strain rates. The stress-strain curve showed that the hot deformation behavior of Cu-0.55Sn-0.08La (wt%) alloy was greatly affected by work hardening, dynamic recovery, and dynamic recrystallization. The activation energy Q was calculated as 287.141 kJ/mol , and hot compression constitutive equation was determined as ε ̇=[sinh(0.006388σ)]^12.123∙exp⁡(37.7505-287.141/RT). The microstructural evolution of the alloy during deformation at 400oC revealed the presence of both slip and shear bands in the grains. At 700oC, dynamic recrystallization grains were observed but recrystallization was incomplete. In sum, these results provided the theoretical basis for continuous extrusion process of alloys with promising future use.

Natural fibers are a gift from nature that we yet fully utilized until now. It can be classified into several groups and bast fibers are the group having the most promising performance when reinforced in polymer composites. However, numerous factors have been reported that influences mechanical properties of fiber reinforcements in the composite. In this review, bast fiber retting process and the effect of enzymatic retting on fiber and fibers reinforced polymer composites have been discussed and reviewed for the latest researches. Retting precedes mechanical processing (i.e. scutching) of the fiber from the stem and is essential for reduction of fiber breakage. All retting methods except chemical retting process are involving secretes of enzymes by bacteria or fungi under controlled (enzymatic retting) or random conditions (water and dew retting). Besides, enzymatic retting is claimed to have more environmentally friendly wastewater products, shorter retting period and controllable fiber biochemical components under mild incubation conditions. This review comprehensively assesses the enzymatic retting process for producing high-quality bast fiber and will become a reference for future development on bast fiber reinforced polymer composites.

Cold stress is a major environmental factor affecting the growth, development, and productivity of various crop species. With the current trajectory of global climate change, low temperatures are becoming more frequent and can significantly decrease crop yield. Wheat (Triticum aestivum L.) is the first crop to be domesticated and is the most popular cereal crop in the world. Due to a lack of systematic research on cold response pathways and gene regulatory networks, the underlying molecular mechanisms of cold signal transduction in wheat are poorly understood. This study reviews recent progress in wheat, including the ICE-CBF-COR signaling pathway in cold stress and the effects of cold stress on hormonal pathways, reactive oxygen species (ROS), and epigenetic regulation. This review also highlights outstanding issues that are crucial for understanding the interactions between wheat and low-temperature conditions.

The statistical technique, the multiple regression model, is employed to analyze the relationship between the dependent variable and several independent variables. The multicollinearity problem is one of the assumptions in the multiple regression model that occurred in the relationship among independent variables. The ordinal least square is the standard method to evaluate parameters in the regression model, but the multicollinearity problem affects the unstable estimator. The Liu regression is proposed to approximate the Liu estimators based on the Liu parameter to overcome multicollinearity. For this paper, we have proposed the modified Liu parameter to estimate the biasing parameter in scaling options to compare the ordinal least square estimator with two modified Liu parameters and six standard Liu parameters. The performance of the modified Liu parameter is considered with the generating independent variables from the multivariate normal distribution in the Toeplitz correlation pattern as the multicollinearity data, where the dependent variable is obtained from the independent variable multiplied with a coefficient of regression and with the error from the normal distribution. The mean absolute percentage error is computed as an evaluation criterion of estimation. For application, the Hepatitis C patients dataset is a real dataset to investigate the benefit of the modified Liu parameter. Through the simulation and real dataset, it can be seen from the results that the modified Liu parameter outperforms the other Liu parameters and the ordinal least square estimator. It can recommend the user for estimating parameters by using the modified Liu parameter when the independent variable exits the multicollinearity problem.

We address weighted composition operators between Bers-type spaces on generalized Hua-Cartan-Hartogs domains and provide necessary and sufficient conditions for their boundedness and compactness. We then apply our results to study the boundedness and the compactness of weighted composition operators between Bers-type spaces on five different domains: generalized Hua domains, Cartan-Hartogs domains, generalized Cartan-Hartogs domains, generalized Cartan-Hartogs domains over different Cartan domains and generalized ellipsoidal-type domains.

Abstract: The migration and transformation of pesticides in the environment will have an impact on the ecosystem. This study collected greenhouse soil from Shouguang, Shandong Province, and studied the photodegradation and leaching of 17 common pesticides in the soil. The results of photodegradation experiments showed that the degradation rate of certain pesticides was increased in the light environment, compared with that in the dark controls. The light half-lives of emamectin benzoate, pyraclostrobin, and metalaxyl were all shorter than their respective dark half-lives, indicating that their residues in soil were greatly affected by light. The leaching experiment showed that the leaching potential of the leachable pesticides was: nitenpyram ≫ metalaxyl &gt; acetamiprid &gt; carbendazim &gt; diethofencarb ≈ chlorantraniliprole &gt; isoprothiolane &gt; oxadixyl &gt; boscalid ≈ tebuconazole &gt; hexaconazole. Pesticides that are easy to leach but not easy to degrade, such as chlorantraniliprole and metalaxyl, have a high potential risk of groundwater pollution, and more degradation technologies should be used to reduce their pollution risk. The study on photodegradation and vertical migration behavior of various pesticides in this study was conducive to providing references for the agricultural use and pollution control of pesticides.

Vegetation has a significant influence on velocity distribution and turbulent energy in a confluence channel. A laboratory measurement with ADV was used to investigate the flow through a Y-shaped confluence channel partially covered with rigid vegetation on its inner bank. In this study, the flow velocities in cases with and without vegetation were measured by the ADV in a Y-shaped confluence channel. The results clearly show that the existence of non-submerged rigid plants has changed the internal flow structure, that the velocity in the non-vegetated area is greater than in the vegetated area, and that there is a large exchange of mass and momentum between the vegetated and non-vegetated areas. The velocity on both sides is significantly reduced when vegetation is present. In the vicinity of tributaries, due to the presence of vegetation, the high-velocity area moved rapidly to the middle of the non-vegetated area, and the secondary flow phenomenon disappeared. In the mainstream, when vegetation was present, circulation disappeared, and the degree of lateral mixing decreased. The presence of vegetation caused a great change in the internal flow structure and made the flow in non-vegetated areas more intense.

We introduce a series of twisted donor-acceptor (D-A) carbazole-benzophenone based electroactive bipolar derivatives that were synthesized through the reaction of 4-fluorobenzophenone with various partially alkylated 3,3’-bicarbazoles. The comprehensive structural characterization of these compounds is provided. These amorphous materials exhibit suitable glass transition temperatures ranging from 57 to 102 °C and demonstrate high thermal stability, with decomposition temperatures reaching 400 °C. Moreover, the developed materials exhibit elevated photoluminescence quantum yields (PLQY) of up to 75.5% and favorable HOMO-LUMO levels, along with suitable triplet-singlet state energy values. Due to their good solubility and suitable film-forming properties, all the compounds were evaluated as blue emitters dispersed in 4,4’-bis(N-carbazolyl)-1,10-biphenyl (CBP) host for the fabrication of organic light-emitting diodes (OLEDs) in concentration dependent experiments. Among these experiments, the device containing 15 wt% of the guest 4-(9’-{2-ethylhexyl}-[3,3’]-bicarbazol-9-yl)benzophenone demonstrated the best characteristics, achieving maximum brightness of 3581 cd/m2, current efficiency of 5.7 cd/A, power efficiency of 4.1 lm/W and external quantum efficiency of 2.7%.

The gut has been a focus of chronic disease research. The gut microbiota produces metabolites that act as signaling molecules and substrates, closely influencing host health. Indigestible oli-gosaccharides (NDOs), as a common dietary fiber, play an important role in regulating the structure and function of gut microbiota. Their mechanism of action is mainly attributed to their carbon source as specific probiotics, producing related metabolites, and regulating the gut mi-crobial community. However, due to the selective utilization of oligosaccharides, some factors such as the types and structures of oligosaccharides have different impacts on the composition of microbial populations and the production of metabolites in the colon ecosystem. This review systematically describes the key factors influencing the selective utilization of oligosaccharides in microorganisms and elaborates how oligosaccharides affect the host's immune system, inflam-mation levels and energy metabolism by regulating microbial diversity and metabolic function, which in turn will affect the onset and progress of chronic diseases, especially diabetes, obesity, depression and intestinal inflammatory diseases, constipation. In this review, we re-examine the interaction mechanisms between gut microbiota and its associated metabolites and diseases, and explore new strategies for promoting human health and combating chronic diseases through di-etary interventions.

In response to the problem of no supporting equipment for the cultivation of Codonopsis in the hilly and mountainous areas of northwest China, a combined machine for transplanting outcrop of Codonopsis with micro ridge covered with film is designed. The key components of the prototype are analyzed and designed, and the structures and working parameters of the seedbed preparation device, seedling casting device, rotary tillage soil-covering device, film covering device, seedling head burial and film edge soil-covering device are determined. The transmission system scheme is established, and the working mechanism of the core components is analyzed. Field experiments show that when the target seedling spacing is 4.4cm and the machines moves forward at the speed of 0.1, 0.15, and 0.2m/s, the variation coefficient of planting spacing and the qualification rate of planting depth all meet the standard requirements. The qualified rate of planting posture and film side outcrop are greatly affected by the operating speed of the machine, and decrease with the increase of operating speed. When the operating speed reaches 0.1m/s, the average variation coefficient of planting spacing is 0.08%, the average qualified rate of planting depth, planting posture and film side outcrop is 95.83%, 94.17% and 93.33% respectively, which shows that the operating performance is better than that of the operating speed of 0.15m/s and 0.2m/s. This study provides new reference for the theoretical research and design of mechanized and automated transplanting machinery for Codonopsis seedlings.

Praeruptorin A(PA), a naturally existing pyranocumarin, is isolated from the dried root of Peucedanum praeruptorum Dunn. So far the anti-cancer effect and molecular mechanism behind Praeruptorin A action in human cervical cancer HeLa cells remain unknown. In the present study, we find that PA reduces cell proliferation and colony formation of human cervical cancer HeLa cells through inducing cell cycle arrest at G0/G1 phase. PA-upregulated p21 and p27 proteins are observed, accompanied with inhibition of cyclin D1 and S-phase kinase-associated protein 2(Skp2) proteins expression. PA could significantly inhibit migration and invasion of human HeLa cells. Meanwhile, PA significantly reduces invasive protein expression of matrix metalloproteinase-2 (MMP-2), and increases protein expression of tissue inhibitor of metalloproteinase-2 (TIMP-2). PA is observed to possess the capacity in suppressing ERK1/2 activation. PD98059 (ERK specific inhibitor) significantly enhances PA-induced downregulation of MMP-2 expression, and upregulation of TIMP-2 expression. Moreover, we found that PA treatment notably inhibits 12-O-tetradecanoylphorbol-13-acetate(TPA)-upregulated ERK1/2 activation, MMP-2 expression, cellular migration and invasion in human HeLa cells. Taken together, these findings are the first to demonstrate the anti-cancer activity of PA, which may act as a promising therapeutic agent for the treatment of human cervical cancer.

In-depth research on the rehabilitation mechanism and motion characteristics of a rehabilitation training robot based on 4-UPUS parallel mechanism. The overall design and the working principle of each key component are explained, and the robot rehabilitation scheme is described. The static analysis and modal analysis of the robot bearing structure are carried out to verify whether the static mechanical characteristics of the mechanism meet the application requirements under working conditions.A simplified mathematical model of the six-bar linkage mechanism is established, and the kinematics of the mechanism is solved by the geometric analysis method. The motion characteristic diagram of each key point is obtained through simulation calculation. Establish the motion model of the parallel mechanism, and discuss the working space and motion performance analysis of the mechanism. The forward solution analysis of the mechanism position is carried out by using the numerical analysis method, and the three-dimensional graphics of the attitude angle and linear displacement of the reachable working space are obtained.Taking the UPUS single branch chain as the analysis object, the single open chain analysis method is used to solve the kinematics image of the corresponding surface in the working space of the mechanism, which verifies the correctness of the kinematics theoretical solution and the feasibility of simulation.The research results show that the 4-UPUS parallel mechanism rehabilitation training robot can cooperate with the ankle joint for rehabilitation training. It makes up for the single movement of the current lower limb rehabilitation robot and the unsatisfactory rehabilitation effect, and provides a reference for the practical application of the subsequent ankle joint rehabilitation robot system.

Autonomous aerial refueling technology is an effective solution to extend flight duration of unmanned aerial vehicles, and also a great challenge due to its high risk. For autonomous probe-and-drogue refueling tasks, relative navigation to provide relative position between the receiver aircraft and the refueling drogue is the first and essential step, and vision-based method is the most frequently used. A new monocular vision navigation sensor with image processing strategy consisting of the drogue detection method and the tracking method is developed for autonomous aerial refueling in this paper. In the drogue detection method, thresholding and mathematical morphology method are adopted to eliminate image interference, and contours extraction method is applied to obtain all contours, which are then subsequently checked to achieve target contour of drogue. In the tracking method, a rectangle of interest (ROI) of current frame image is determined by positioning results of last frame, and then processed by the previous drogue detection method. Finally, the proposed image processing strategy in monocular vision navigation sensor is validated using real flight images, which are captured from an autonomous aerial refueling testbed using a micro six-rotor aircraft as receiver aircraft.

Globally, weeds interfere with agricultural production activities and have a very serious impact on agriculture and animal husbandry. Identifying a safe and reliable weed control strategy might increase yield, production net income, and improve crop quality. A field experiment was carried out to explore the effects of weeds interference frequency on the yield and quality of Glycyrrhiza uralensis Fisch in an arid and semi-arid area of northwest China. The experiment consisted of seven treatments and were (1) no weeding, marked as WF0; (2)-(7) artificial weeding by hoe once every 1, 2, 4, 6, 8, 10 weeks after emergence, marked as WF1, WF2, WF4, WF6, WF8 and WF10, respectively. We found that the higher weeding frequency had a higher the plant height, photosynthesis, yield and quality. The highest yield was obtained in the WF1 treatment, while the cost of weeding was the highest among all treatments. The concentration of liquiritin and glycyrrhizic acid were increased by 53.24% and 36.57%, with the highest nitrogen metabolism enzymatic activities and quality in WF4 treatment. WF4 treatment exhibited the largest increases in the net income among all treatments in both growing seasons, with respective increases up to 71.39 % and 78.81%. These findings suggested that weeding once every 4 weeks would be an effective and sustainable measure to control weeds in an arid and semi-arid area.

In order to explore the yield-increasing mechanism of mechanized potato planting with corn straw mulching, a two-year ( 2021 and 2022 ) field experiment was conducted to study the effects of mechanized no-tillage with straw mulching on potato yield and water use efficiency. This experiment included corn straw mulching potato mechanized no-tillage planting ( JG ), plastic film mulching ( HM ) and open flat planting ( CK ). The results showed that mechanical no-tillage with straw mulching had significant effects on soil water content, yield and water use efficiency in 0-100 cm soil layer (p&lt; 0.05). There was no significant difference in yield between JG and HM, but it was significantly higher than that of CK. The yield of JG was 3.09 %~12.27 % higher than that of CK. The yield increase was mainly achieved by increasing the potato weight per plant ( 0.697 ~ 0.862** ) and the average single potato weight ( 0.048 ~ 0.631 ). The tuber weight per plant was positively correlated with the plant height at seedling stage ( 0.03 ~ 0.92** ), and positively correlated with the dry weight of stems and leaves at tuber expansion stage and starch accumulation stage ( 0.74** ~ 0.95**). It was negatively correlated with the number of branches at tuber formation stage ( -0.33 ~ -0.88** ). Compared with CK, JG could significantly improve the water use efficiency of potato and reduce the water consumption during the whole growth period of crops. In 2021, JG was 6.5 % higher than CK, and HM was 6.88 % lower than CK. In 2022, JG and HM increased water use efficiency by 26.17 % and 14.50 % compared with CK. It can be seen that JG is a green and efficient mechanized potato cultivation technology suitable for dry farming areas.

The complete genomic sequence of a Cassava common mosaic virus Linggao isolate (CsCMV-LG) was determined from cassava (Manihot esculenta Crantz) with mild leafy mosaic symptom to no symptom in China. Excluding the poly(A) tail, the CsCMV-LG genome (GenBank accession No. MT038420) is 6374 nucleotides (nts) in length, with five major open reading frames encoding a 1450-amino acids (aa) RNA-dependent RNA polymerase (RdRp), three triple gene block (TGB) proteins (231-aa, 110-aa and 95-aa), and a 229-aa coat protein (CP). Phylogenetic analysis indicated that the complete genome of the CsCMV-LG is closely related to that of CsCMV-Brazilian which has been assigned to the genus Potexvirus, but the sequence identity shared only 88.0%. Notable, the mild CsCMV-LG isolate can also infect Nicotiana benthamiana in laboratory through rub inoculation causing mild vein yellowing at 15-day post inoculation. This is the first full-length genome sequence of a distinct isolate of Cassava common mosaic virus (CsCMV) infecting cassava in Hainan, China.

Artificial intelligence has garnered significant attention in recent years as a rapidly advancing field of computer technology. With the continual advancement of computer hardware, deep learning has made breakthrough developments within the realm of artificial intelligence. Over the past few years, applying deep learning architecture in medicine and Industrial anomaly inspection has significantly contributed to solving numerous challenges related to efficiency and accuracy. Despite excellent results in radiological, pathological, endoscopic, ultrasonic, and biochemical examinations, this paper utilizes deep learning combined with image processing to identify spinal canal and vertebral foramen dimensions. In existing research, technologies such as corrosion and expansion in magnetic resonance image (MRI) processing have also strengthening the accuracy of results. Indicators such as area and Intersection over Union (IoU)are also provided for assessment. Among them, the mean average precision (mAP), for identifying intervertebral foramen (IVF) and intervertebral disc (IVD) through YOLOv4 is 95.6%. Resnet50 mixing U-Net was employed to identify the spinal canal and intervertebral foramen and achieved IoU scores of 79.11% and 80.89%.

The shear stress generated by wall turbulence is the main cause of wall friction resistance in turbulent flow through pipes. This paper investigates the impact of inserting rest periods (regions of constant Reynolds number) within the pulsating operating cycle of velocity on the fully turbulent flow at large time-averaged Reynolds numbers, using the Large Eddy Simulation (LES) method. The study aims to explore the effect of increasing rest periods within pulsations on drag resistance. The dimensionless shear stress and drag reduction rates during different time periods of rest were analyzed. Numerical simulation results indicate that the pulsating velocity operation mode does not necessarily lead to drag reduction; it may even result in increased resistance. Inserting rest periods within the pulsation cycle can achieve drag reduction effects, with the maximum drag reduction rate reaching 21.8\%. Comparisons with experimental data and Direct Numerical Simulation (DNS) from the literature validate the feasibility of using the LES method for pipe pulsating operation modes.

People have always hoped to be able to fill an entire plane with ``single unit cells'' without periodicity. This wish was realized after the mathematician discovered a 13-sided ``single unit cell'' named `einstein'. These non-periodic tessellations generally exhibit anisotropic properties, making them superior in terms of mechanical performance compared to periodic structures. From the perspective of information entropy, the reason behind the improved mechanical properties of these structures is the higher entropy associated with non-periodic configurations. To quantify the disorder of non-periodic structures, we propose an entropy expression for the `einstein' metamaterial. To demonstrate the mechanical properties of these high-entropy structures, we fabricate specimens using 3D printing and conducte mechanical experiments. For comparative analysis, we also use ABAQUS to perform finite element analysis of the problem. The research results reveal that the mechanical properties of high-entropy structures created by the non-periodic stacking of cells are significantly improved compared to those of low-entropy structures created by periodic stacking. The conclusions drawn from the study of individual issues are generalizable and may be of assistance in future material and structural design.

Crowd abnormal behavior recognition is one of the research hotspots in computer vision. Its goal is to use computer vision technology and abnormal behavior detection models to accurately perceive, predict, and intervene in potential abnormal behaviors of the crowd, and monitor the status of the crowd system in public places in real-time, to effectively prevent and deal with public security risks and ensure public life safety and social order. To this end, focusing on the crowd abnormal behavior recognition technology in the computer vision system, a systematic review study of its theory and cutting-edge technology is conducted. First, the crowd level and abnormal behaviors in public places are defined, and the challenges faced by crowd abnormal behavior recognition are expounded. Then, from the dimensions based on traditional methods and based on deep learning, the mainstream technologies of abnormal behavior recognition are discussed, and the design ideas, advantages, and limitations of various methods are analyzed. Next, the mainstream software tools are introduced to provide a comprehensive reference for the technical framework; Secondly, typical abnormal behavior datasets at home and abroad are sorted out, and the characteristics of these datasets are compared in detail from multiple perspectives such as scale, characteristics and uses, and the performance indicators of different algorithms on the datasets are compared and analyzed; Finally, the full text is summarized and the future development direction of crowd abnormal behavior recognition technology is prospected.

As one of the main equipment of coal transportation, the belt conveyor with detection system is an important direction for the development of intelligent mine. The occurrences of non-coal foreign objects making contact with belts are common phenomenon in complex production environments and improper human operations. In order to avoid major safety accidents caused by scratches, deviation and breakage of the belt, a foreign object detection method is proposed for belt conveyor in this work. Firstly, a foreign object image dataset is collected and established, and IAT image enhancement module and attention mechanism of CBAM are proposed to enhance image data sample. Moreover, to predict the angle information of foreign objects with large aspect ratios, a rotating decoupling head is designed, and a MO-YOLOX network structure is constructed. Some experiments are carried out with the belt conveyor in the mine intelligent mining equipment laboratory, and the detections of different foreign objects are analyzed. Experimental results show that the accuracy, recall, and mAP50 of the proposed rotating frame foreign object detection method reaches 93.87%, 93.69%, and 93.72%, and the average inference time of foreign object detection is 25 ms.

14-Deoxy-11,12-didehydroandrographolide (deAND), a diterpenoid in Andrographis paniculata (Burm. f.) Nees, acts as a bioactive phytonutrient that can treat many diseases. To investigate the protective effects of deAND on reducing fatty liver disease, male mice were fed a high-fat and high-cholesterol (HFHC) diet without or with 0.05% and 0.1% deAND supplementation. Cholesterol accumulation, antioxidant and anti-inflammatory activities in liver and liver injury were evaluated after deAND treatment. The results show that deAND treatment for 7 weeks reduced plasma alanine aminotransferase activity and lowered hepatic cholesterol accumulation, tumor nuclear factor-α, and histological lesions. 0.1% deAND treatment reduced HFHC diet-induced apoptosis by lowering the caspase 3/pro-caspase 3 ratio. After 11-weeks of deAND treatment, increased NOD-like receptor protein 3 (NLRP3), capase-1, and interleukin-1β protein levels in liver were suppressed by deAND treatment. In addition, nuclear factor erythroid 2-related factor 2 (Nrf2) mRNA expression, heme oxygenase-1 protein expression, and the activities of glutathione peroxidase and glutathione reductase were increased in mice fed the HFHC diet. However, those activities of antioxidant enzymes or proteins were also upregulated by 0.1% deAND treatment. Furthermore, deAND treatment tended to lower hepatic lipid peroxides. Finally, deAND treatment reversed the depletion of hepatic glutamate level induced by HFHC diet. These results indicate that deAND may ameliorate HFHC diet-induced steatohepatitis and liver injury by increasing antioxidant and anti-inflammatory activities.

Cadmium (Cd) contamination in rice grains is posing a significant threat to global food security. To restrict the transport of Cd in the soil-rice system, an efficient way is to use the ionomics strate-gy. Since calcium (Ca) and Cd have similar ionic radii, their uptake and translocation may be linked in multiple aspects in rice. However, the underlying antagonistic mechanisms are still not fully understood. Therefore, we first summarized the current knowledge on the physiological and molecular footprints of Cd translocation in plants and then explored the potential antagonistic points between Ca and Cd in rice, including exchange adsorption on roots, plant cell wall compo-sition, co-transporter gene expression, and transpiration inhibition. This review provides sugges-tions for the Ca/Cd interacting study in rice and introduces the ionomics research to better control the accumulation of Cd in plants.

Research has consistently found that people with mental illness (known as consumers) experience lower levels of participation in meaningful activities, which can limit their opportunities for recovery support. The aim of this study was to describe the outcomes of participation in a group program designed to address all stages of activity participation, known as Pathways to Participation (P2P). A descriptive longitudinal design was utilized, collecting data at three time points. Outcomes were measured by the Camberwell Assessment of Need Short Appraisal (CANSAS), Recovery Assessment Scale – Domains and Stages (RAS-DS), Behaviour and Symptom Identification Scale (BASIS-24), Living in the Community Questionnaire (LCQ) and time use diaries. All data was analysed using descriptive statistics, and Chi square analyses. Seventeen consumers completed baseline data, eleven contributed post program data and eight provided follow up data. Most were female (63.64%) and had been living with mental illness for 11.50 (± 7.74) years on average. Reductions in unmet needs and improvements in self-rated recovery scores were re-ported, but no changes were identified in either time use or psychosocial health. The findings indicate the P2P program may enable consumers to achieve positive activity and participation out-comes as part of their personal recovery.

In recent years, governments applied intelligent transportation system (ITS) technique to provide several convenience services (e.g., garbage truck app) for residents. This study proposes a garbage truck fleet management system (GTFMS) and data feature selection and data clustering methods for travel time prediction. A GTFMS includes mobile devices (MD), on-board units, fleet management server, and data analysis server (DAS). When user uses MD to request the arrival time of garbage truck, DAS can perform the procedure of data feature selection and data clustering methods to analyses travel time of garbage truck. The proposed methods can cluster the records of travel time and reduce variation for the improvement of travel time prediction. After predicting travel time and arrival time, the predicted information can be sent to user’s MD. In experimental environment, the results showed that the accuracies of previous method and proposed method are 16.73% and 85.97%, respectively. Therefore, the proposed data feature selection and data clustering methods can be used to predict stop-to-stop travel time of garbage truck.

Geopolymer concrete (GPC) represents an innovative green and low-carbon construction material, offering a viable alternative to ordinary Portland cement concrete in building applications. However, existing studies tend to overlook the recyclability aspect of GPC for future use. Various structural applications necessitate the use of concrete with distinct strength characteristics. The recyclability of the parent concrete is influenced by these varying strengths. This study examined the recycling potential of GPC across a spectrum of strength grades (40, 60, 80 and 100 MPa, marked as C40, C60, C80 and C100) when subjected to freeze-thaw conditions. The cementitious material comprised 60% metakaolin and 40% slag, with natural gravel serving as the coarse aggregate, and the alkali activator consisting of sodium hydroxide solution and sodium silicate solution. The strength of the GPC was modulated by altering the Na/Al ratio. After 350 freeze-thaw cycles, the GPC specimens underwent crushing, washing, and sieving to produce recycled geopolymer aggregates (RGAs). Subsequently, their physical properties and microstructure were thoroughly examined. The findings indicated that GPC with strength grades of C100, C80, and C60 were capable of enduring 350 freeze-thaw cycles, in contrast to C40, which did not withstand these conditions. RGAs derived from GPC of strength grades C100 and C80 complied with the criteria for Class II recycled aggregates, whereas RGAs produced from GPC of strength grade C60 aligned with the Class III level. A higher strength grade in the parent concrete correlated with enhanced performance characteristics in the resulting recycled aggregates.

In nature and engineering applications, flexible fiber beds covering biological surfaces can play a role in reducing resistance. These fibers deform under the action of fluids, and this deformation affects the fluid flow state, forming a complex fluid-solid interaction phenomenon. To quantitatively analyze such issues, the physical model is simplified to the deformation problem of an soft hair bed caused by Stokes flow, and the deformation problem of a single fiber caused by Stokes flow is further studied. The deformation problem of an elastic single fiber in a channel caused by Stokes flow can be described by a nonlinear integral equation. We have obtained a new series solution, which has been compared with the previous perturbation method to verify the accuracy and effectiveness of the series solution. Meanwhile, we have further provided an extended form of flexible fiber deformation through experimental fitting. This fluid-solid interaction problem involves multiple fields and is very important in many natural and engineering systems. The research in this paper can not only help us better understand complex phenomena in nature but also delve into the interaction mechanism between fluids and solids, providing a theoretical basis for future scientific research and engineering applications.

Identification of recurrent driver mutations in genes encoding tyrosine kinases has resulted in the development of molecularly targeted strategies designed to improve the outcomes for patients diagnosed with acute myeloid leukemia (AML). The receptor tyrosine kinase FLT3, is the most commonly mutated gene in AML, with internal tandem duplications within the juxtamembrane domain (FLT3-ITD) or missense mutations in the tyrosine kinase domain (FLT3-TKD), present in 30%-35% of AML patients at diagnosis. An established driver mutation and marker of poor prognosis, the FLT3 tyrosine kinase has emerged as an attractive therapeutic target, and thus has encouraged the development of FLT3 tyrosine kinase inhibitors (TKIs). However, the therapeutic benefit of FLT3 inhibition, particularly as monotherapy, frequently results in the development of treatment resistance and disease relapse. Commonly, FLT3 inhibitor resistance is induced by the emergence of secondary lesions in the FLT3 gene, particularly in the second tyrosine kinase domain at residue Asp835 (D835) to form a ‘dual mutation’ (ITD-D835). Individual FLT3-ITD and FLT3-TKD mutations influence independent signaling cascades however, currently little is known which divergent signaling pathways are controlled by each of these FLT3 specific mutations, particularly in the context of patients harboring dual ITD-D835 mutations. This review provides a comprehensive analysis of the known discrete and cooperative signaling pathways regulated by each of the FLT3 specific mutations, as well as the therapeutic approaches that hold the most promise for development of more durable and personalized therapeutic approaches targeting mutant FLT3, to improve the treatment of AML.

The uncertainty in the secondary path of an Active Noise Control (ANC) headphone affects the waterbed effect and stability of the feedback system. This study focuses on the uncertainty of the secondary path when real users wear headphones, and proposes a new uncertainty constraint based on the measured results of the secondary path transfer function under different wearing conditions of dummy head and limited subjects. This constraint and a cascaded second-order infinite impulse response filter with fixed coefficients are used to formulate a control strategic function, which is optimized by the Improved Grey Wolf Optimizer (IGWO) algorithm to obtain the optimal controller with better noise reduction performance. The proposed method and simulation model are validated based on the experimental test results. The results demonstrate that the safety factor and waterbed suppressing factor contained in the proposed uncertainty constraint ensures more stable noise reduction and effective suppression of the waterbed effect for new subjects without a priori data.

Conical emission is a typical nonlinear phenomenon that occurs when the femtosecond laser pulses interact with transparent media. In this work, the conical emission induced by two kinds of typical vortex beams (i.e., Laguerre-Gaussian (LG) and Bessel-Gaussian (BG) beams) in water is experimentally studied. By recording the light spots of different wavelengths on the screen, the characteristics of the conical emission induced by femtosecond vortex beams are studied. It is found that the spots of the supercontinuum induced by the two kinds of vortex beams differ greatly from each other: The spots of the supercontinuum induced by the BG beam are a set of concentric rings like a rainbow with a white center, while the whit light spot in the case of the LG beam are a circular white disk, which is different from the commonly observed white light spots. By measuring the maximum divergence angle, it is observed that the divergence angle increases with the decrease of the wavelength, while the TC merely affects the divergence angle, which is explained from the formation mechanism of conical emission in terms of self-phase modulation. We hope this work can be helpful to the understanding of interaction between the intense laser pulses and matters.

Extracting railway tracks is crucial for creating electronic railway maps. Traditional methods require significant manual labor and resources, while existing neural networks have limitations in efficiency and precision. To address these challenges, a railway track extraction method using an improved DeepLabV3+ model is proposed, which incorporates several key enhancements. Firstly, the encoder part of the method utilizes the lightweight network MobileNetV3 as the backbone extraction network for DeepLabV3+. Secondly, the decoder part adopts the lightweight universal upsampling operator CARAFE for upsampling. Lastly, to address any potential extraction errors, morphological algorithms are applied to optimize the extraction results. Additionally, a dedicated railway track segmentation dataset is created to train and evaluate the proposed method. The experimental results demonstrate that the model achieves impressive performance on the railway track segmentation dataset and DeepGlobe dataset. The MIoU scores are 88.93% and 84.72%, with Recall values of 89.02% and 86.96%. Moreover, the overall accuracy stands at 97.69% and 94.84%. The algorithm's operation time is about 5% lower in comparison to the original network. Furthermore, the morphological algorithm effectively eliminates errors like holes and spots. These findings indicate the model's accuracy, efficiency, and the enhancement brought by the morphological algorithm in error elimination.

Biological neural network (BNN) is the core brain for creature to accomplish its intelligent behaviors through unique network structure and mechanisms. It also inspires controlling human-designed autonomous agents including robots to generate more advanced intelligent behaviors by mimicking the neural control mechanism of creatures at a deeper and more interactive level. Here, we constructed a whole-brain neural network model of Caenorhabditis elegans (C. elegans), which characterizes the electrochemical processes at the level of cellular synapse. The neural network simulation integrates computational programming and visualization of neurons and synapse connections of C. elegans, containing the specific controllable circuits summarization with their dynamic characteristics within the whole network. To illustrate its particular intelligent control capability in terms of robotics, we introduce the first innovative methodology for applying the BNN model to a 12-legged robot’s movement control based on the established numerical simulation platforms. We accomplished and designed two methods and corresponding encoding processes, one involving orientation control and the other involving locomotion generation, to demonstrate the intelligent control performance of BNN. Both simulation and experiment results indicate that the robot exhibits stronger autonomy and more intelligent moving performance under the control of BNN. We then summarized the contributions for digitalizing the C. elegans’ whole-brain neural network in real-time and utilizing it to control robot in a closed loop to validate its advanced intelligence control ability in terms of a scientific robot.

Tilapia lake virus (TiLV) is the main tilapia-infecting virus worldwide, causing serious economic losses. However, there is no vaccine for this viral disease. Here, TiLV ORF10 (TiLV-ORF10) encoding a protein with abundant epitopes was constructed into the eukaryotic expression vector pcDNA3.1, and used to evaluate the immune protective effects in Nile tilapia (Oreochromis niloticus). RT-PCR and western blot analyses confirmed vaccine plasmid expression in tilapia muscle tissues. Moreover, the transcription levels of immunoglobulin M, toll-like receptor 2, myeloid differentiation factor 88, interleukin 8, tumor necrosis factor alpha, gamma-IFN, and nuclear factor κB immune-related genes were statistically significantly upregulated in the spleen, liver, and kidney of vaccinated tilapias (P < 0.05). TiLV challenge experiments showed that relative percent survival (RPS) was significantly enhanced in fish by this DNA vaccine. Moreover, RPS was enhanced further when using a higher amount of the DNA vaccine (85.72% RPS at a DNA dose of 45 μg pcDNA3.1–ORF10). Vaccination with pcDNA3.1–ORF10 significantly reduced virus replication, as evidenced by the low amount of virus in the spleen, liver, and kidney of vaccinated tilapias after TiLV challenge. Thus, pcDNA3.1–ORF10 could induce protective immunity in tilapia and may be a potential vaccine candidate for controlling diseases caused by TiLV.

Applied talent is not only a builder of human civilization but also a promoter of economic development. They not only need systematic and solid engineering theoretical knowledge but also rich engineering practical experience. Applied undergraduate colleges are the cradle for cultivating applied talent and shoulder the important mission of cultivating various types of applied talent for society. With the rapid development of higher education, the number of applied undergraduate institutions has sharply increased, but the quality of applied talent cultivated by them has shown a significant decline, which greatly restricts the pace of industrial development in the world. This article proposes a new concept of promoting the "three certificates" (graduation certificate, degree certificate, and skill certificate) education model in applied undergraduate colleges, which is of great significance for the country to cultivate composite talents with the ability of "product design, production management, and product processing" at the same time.

In this study, we explored the manipulation of optical properties in the terahertz (THz) frequency band of radio-frequency (RF) sputtered indium-tin-oxide (ITO) thin-films on highly resistive silicon substrate by rapid thermal annealing (RTA). The optical constants of as-deposited and RTA-processed ITO films annealed at 400°C, 600°C and 800°C are determined in the frequency range of 0.2 to 1.0 THz. The transmittance can be changed from ~ 27% for as-deposited to ~ 10% and ~ 39% for ITO films heat-treated at different annealing temperatures, T_a’s. Such variations of optical properties in the far infrared for the samples under study are correlated with their mobility and carrier concentration, which are extracted from Drude-Smith modeling of THz conductivity with plasma frequency, scattering time and the c-parameters as fitting parameters. Resistivities of the films are in the range of 10^-3 to 10^-4 W-cm, confirming that annealed ITO films can potentially be used as transparent conducting electrodes for photonic devices operating at THz frequencies. The highest mobility, m = 47 cm²/V∙s, with carrier concentration, N_c = 1.31´10²¹ cm^-3, was observed for ITO films annealed at T_a = 600°C. The scattering times of the samples were in the range of 8 – 21 fs, with c-values of -0.63 to -0.87, indicating strong back scattering of the carriers, mainly by grain boundaries in the polycrystalline film. To better understand the nature of these films, we have also characterized the surface morphology, microscopic structural properties and chemical composition of as-deposited and RTA-processed ITO thin-films. For comparison, we have summarized the optical properties of ITO films sputtered on fused silica substrates, as-deposited and RTA-annealed, in the visible transparency window of 400-800nm. The optical bandgaps of the ITO thin films were evaluated with a Tauc plot from the absorption spectra.

Magnetomotive ultrasound (MMUS) is a promising imaging modality for detecting magnetic nanoparticles. In MMUS, an external oscillating magnetic field induces motion of the injected magnetic nanoparticles within tissue, and phase-based tracking algorithms are used to detect the motion. However, the subwavelength scale of theses displacements (often a few micrometers) makes direct visualization on conventional ultrasound B-mode images impossible. In this work, we adapt the Eulerian motion magnification technique to create a novel ultrasound display mode for identifying the nanoparticle locations, eliminating the need for displacement tracking algorithms. Phantom and in-vivo experiments demonstrate that our technique successfully magnifies magnetomotion and the associated shear wave propagation in ultrasound B-mode imaging and pinpoints the nanoparticle vibration source, even in low-concentration scenarios. Additionally, motion magnification magnified the displacement of nanoparticles, having the potential to improve the localization accuracy of displacement tracking algorithms in MMUS.

Fully mechanized mining face production involves complex geological conditions; mining pressure; gas, water, fire and other mining environments. The working face needs a shearer, hydraulic support, a scraper conveyor and other equipment for coordination. The deep integration of intelligent technology with factors such as "humans, machines, the environment, and management" in the workplace is the core content of intelligent coal mines. This paper puts forward an advanced framework for coal mining robot technology systems, including single robots, robotized equipment, robot clusters and unmanned systems. The framework clarifies the common key technologies of coal mining robot research and development and cross-integration with new technologies such as 5G, the industrial internet, big data, artificial intelligence, and digital twins to improve the autonomous and intelligent application of coal mining robots. By establishing a scientific and complete standard system for coal mining robots, we aim to achieve customized research and development and standardized production of various types of robots. A specific analysis was conducted on the research progress of common key technologies such as explosion-proof design, mechanical system innovation, power drive, intelligent sensing, positioning and navigation, and underground communication of coal mining robots. The current research and application status of various types of coal mining robots in China are summarized. A new direction for future coal mine robot research and development is proposed. Moreover, robotic mining systems should be promoted to enhance the overall intelligence level and mining efficiency of mining equipment. To develop human‒machine environment-integrated robots to improve the autonomy and collaboration level of coal mining robots. The digital twinning of the entire mine robot system should be accelerated, the normalized operation level of coal mine robots should be improved, research on coal mining robots, support robots, and transportation robots should be carried out, intelligence should be achieved in fully mechanized mining faces, and equipment support for fewer and unmanned fully mechanized mining faces should be provided. The practical process of implementing coal mining robotization has been summarized, and the technical and engineering feasibility of the coal mining machine population has been verified.

The lower reaches of the Changhua River are located in the northwest of Hainan Island, and the shallow groundwater in this area is the main water source for residents living at both sides of the river. In order to sustain the exploitation and use of water resources in this area, it is essential to clarify the chemical characteristics and the formation mechanism of the groundwater. We collected 100 sets of shallow groundwater samples from the lower reaches of the Changhua River, and analyzed the chemical characteristics of the groundwater in shallow aquifers as well as its controlling factors by means of the methods including descriptive statistical analysis, Piper diagram, Gibbs diagram, and ion ratio. The results show that the overall characteristics of groundwater in the study area are near-neutral to weakly alkaline nature, indicating a generally oxidized environment. The groundwater involves in 56 chemical types, and the most predominant types are Ca•Na-HCO3 and Ca-HCO3, respectively. NO- 3 has become a macro component exceeding SO2- 4in most of the sampling groundwater, suggesting a significant impact of human activities in this area. At the same time, the chemical characteristics of groundwater in the study area are mainly affected by the water-rock interaction, while the water-rock interaction is mostly affected by the dissolution of silicate rocks and less by the dissolution of carbonate rocks and evaporite rocks. According to the ion ratio results, Na+ and K+ in the study area are mainly from the leaching of silicate rocks, Ca2+ and Mg2+ are mainly from the dissolution of carbonate rocks, in addition to a certain degree of cationic exchange. NO- 3 is mainly related to human activities, and the human activities are more affected by agricultural activities and domestic sewage than by industrial and mining activities. This study can provide a reference for the development and protection of shallow groundwater in the lower reaches of the Changhua River.

(1) Introduction: The unprecedented coronavirus disease 2019 (COVID-19) epidemic has caused millions of infections worldwide and represents a significant challenge facing modern health care systems. This study was conducted to investigate the impact of lockdown measures on regional neonate services, which might be used to predict the long-term effects of medical behavior. (2) Methods: Using hospital information system (HIS) Statistics data from 4 January 2019 to 27 August 2020, an interrupted time-series analysis was employed to compare changes and trends in hospital admissions and disease spectrum before and after the lockdown interventions. Furthermore, this study was designed to evaluate whether the pandemic influenced newborns' healthcare behavior. (3) Results: Overall, 13,540 infants were admitted to the NICU during the pre-COVID period (n = 12082) and COVID-impacted period (n =4558). The patients' age at admission were younger than that of the pre-COVID-19 period (median age 5d vs. 6d after birth, p＜0.001). The overall number of neonate visits consistently decreased from the first days of the lockdown measures (24 January 2020). The disease spectrum for respiratory system, infectious diseases, and gastrointestinal disease indicated no declined immediately after intervention(p =0.079, p =0.113, p =0.060, respectively). There was an immediate decline in the volume of Jaundice-related conditions (p<0.001) after lockdown measures. The percentage of patients who suffer from respiratory system and infectious diseases has decreased (p =0.005 and p =0.002). However, a relatively high percentage of patients admitted to the neonatal intensive care unit (NICU) presented with Jaundice-related conditions (p <0.001). (4) Conclusions: In summary, the COVID-19 pandemic profoundly impacted the regional neonate services. However, it is still unclear what might be the effect of long-term effects from pandemic.

In an effort to enhance the efficiency and safety of open-pit mines, this study explores the optimization of end slope road parameters and slope structures, specifically focusing on unmanned driving lanes.A significant aspect of the study is the development of a truck trajectory offset model, which considers the different reaction times between automated sensors and human drivers in adapting to environmental changes. To test these concepts, the study uses numerical simulations to confirm the stability of the proposed end slope designs. Using Victory West Mine No. 1 as a case study, the research determines the optimized width for unmanned driving lanes and the maximum angle for safe steepening of end slopes. The findings indicate that the optimized unmanned lane width for NTE240 mining dump trucks is 1743 mm, allowing for a 2-degree increase in the slope angle at the south end slope. This optimization leads to a steep mining stripping volume of 3.2735 million m³ and a coal output of 2.49628 million tons, maintaining a stripping ratio of 1.31m³/t. These results demonstrate that the unmanned driving road width optimization not only ensures slope safety but also significantly boosts the economic benefits of steep mining in open-pit mines.

Strawberry root rot caused by Neopestalotiopsis clavispora is one of the main diseases of strawberry and significantly impacts the yield and quality of strawberry fruit. There are now no effective control techniques available except for fungicide sprays, which may directly impact consumers. Biological control is becoming an alternative method for the control of plant diseases to replace or decrease the application of traditional synthetic chemical fungicides. Trichoderma is widely used as a biological agent for controlling strawberry root rot. In order to provide resources for screening the highly effective biocontrol fungus for controlling strawberry root rot caused by Neopestalotiopsis clavispora, the biocontrol mechanism,the control effects of Trichoderma asperellum CMT10 against strawberry root rot and growth-promoting effects on strawberry seedlings were investigated by plate culture, microscopy observation and root drenching methods.The results showed that CMT10 had obvious competitive, antibiotic and hyperparasitism effects on Neopestalotiopsis clavispora CMGF3. The CMT10 could quickly occupy nutritional space, and the inhibition rates of CMT10 against CMGF3 in confrontation culture on 7 d was 65.49%. The inhibition rates of volatile metabolite and fermentation metabolite produced by CMT10 against CMGF3 were 79.67% and 69.84%, respectively. The mycelium of strain CMT10 can act as hyperparasites by making contacting, winding and penetrating hyphae of CMGF3. Pot experiment showed that the biocontrol efficacy of CMT10 on strawberry root rot caused by Neopestalotiopsis clavispora was 63.00%. CMT10 had obvious promotion effect on strawberry growth, the plant height, root length, total fresh weight, root fresh weight, stem fresh weight and root dry weight, with the promotion rates were 20.09%, 22.39%, 87.11%, 101.58%, 79.82% and 72.33%, respectively. Overall, this study showed the ability of Trichoderma asperellum CMT10 to control strawberry root rot and their potential to develop as novel biocontrol agents to replace chemical fungicides for eco-friendly, sustainable agriculture.

The vegetation types on the Qinghai-Tibet Plateau are complex and diverse, and the ecological environment is fragile and sensitive. It is very important to study the dynamic changes in vegetation and the main factors related to these changes to grasp the present state of the regional ecosystem, maintain the balance of the ecosystem and promote the sustainable development of the ecosystem. Therefore, this paper is based on SPOT/VEG NDVI (normalized difference vegetation index) data, land use data, topographic data and meteorological data from 1999 to 2019. The spatiotemporal variation in the NDVI over the Tibetan Plateau in the last 21 years and its response to different driving factors were investigated by using the Sen slope method, Mann–Kendall mutation test, partial correlation analysis and geographical detector method. The results showed that (1) the vegetation coverage on the Qinghai-Tibet Plateau showed an increasing trend from 1999 to 2019, with increases in approximately 67.00% of the plateau area. (2) The spatial differences in vegetation coverage were large; notably, low-density vegetation areas decreased obviously, moderate-density vegetation areas accounted for approximately 50% of the total area, high-density vegetation areas were the least common, and the overall growth rate was significant. (3) The NDVI was positively correlated with temperature and precipitation, and a positive correlation was observed in more than 66% of the region. (4) The order of the influence of single driving factors on the NDVI was as follows: precipitation > soil type > altitude > temperature > gradient > slope > population density > GDP. (5) The effect of multiple factors was significantly higher than that of single driving factors, with a notable nonlinear influence. The interactions between meteorological factors, such as precipitation, and topographic factors, such as altitude, were important, with a q value over 0.79.

Type 2 diabetes mellitus(T2DM) is an increasingly prevalent and serious health problem. Its onset is typically associated with metabolic disorders and disturbances in the gut microbiota. Previous studies have reported the anti-T2DM effects of Pueraria thomsonii Radix as a functional food. However, the mechanism of action is still unknown. In this study, the effects of Pueraria thomsonii Radix water extract(PTR) on db/db mice were evaluated by pharmacology, metabolomics, and 16S rRNA gene sequencing. The results showed that PTR could improve the body weight of mice, reduce fasting blood glucose(FBG), urinary glucose(UGLU), homeostasis model assessment insulin resistance(HOMA-IR), urinary albumin/creatinine ratio(UACR), and reduce pancreatic tissue damage. Metabolomics showed that the Model group produced 109 differential metabolites, of which 74 could be regulated by PTR. 16S rRNA sequencing was done in fecal samples and results showed that PTR could reduce the Firmicutes/Bacteroidetes ratio(F/B) associated with obesity and regulate 3 beneficial bacteria and 1 harmful bacteria. In conclusion, the results showed that PTR could ameliorate T2DM symptoms, metabolic disorder, and gut microbiota imbalance of db/db mice, and it was superior to metformin in some aspects. We suggested for the first time that γ-aminobutyric(GABA) may be involved in the regulation of the microbiota-gut-brain axis(MGB) and thus affect the metabolic disorders associated with T2DM. This study will provide a scientific basis for the development of functional food with PTR.

We address weighted composition operators ψCφ from α-Bloch spaces to Bers-type spaces of bounded holomorphic functions on Y, where Y is a generalized Hua domain of the first kind, and obtain some necessary and sufficient conditions for the boundedness and compactness of those operators.

The microspheres constituted by proteinoids synthesized from Fox’s simulation experiments. They had peptide bond structure and weak catalysis, as well as proliferated themselves. Such microspheres were believed the models for primitive life. Due to lack of metabolism and self-reproduction, the microspheres could not meet requirements of life. Thus, how microspheres could evolved into primitive life remain unsolved mysteries. The microspheres were supposed a dissipative structure and the processes of absorption and hydrolysis could be balanced to maintain their stability by consuming proteinoid. Proteinoid molecules differed in their life spans, which were mainly determined by their multi-space structures. Consequently, molecule selection and retention could occur spontaneously in microspheres and lead to a more organized and stabilized structure of the whole microsphere with time through dissipative process. More complex chain network of chemical reactions could happen in microspheres because the proteinoid with complex, ordered multi-space structure and relatively high catalytic activity would retain. In such microspheres, nucleotides could produce and further aggregate into RNA. The synthesis of real proteins could take place with RNA as the template catalyzed by proteinoids or RNA inside microspheres. When template-based protein molecules replaced the proteinoid inside the microspheres, a protein-based self-catalyzed network of chemical reactions could take place. It is plausible if Fox’s proteinoids microspheres is to dawn on a dissipative structure, then molecule selection could occur spontaneously by “dissipative” proteinoids, and the microspheres would acquire catalytic activity due to preserved the proteinoid with a large molecular weight and relatively complex and ordered multi-space structure, and relatively high catalytic activity. Thus the microspheres would spontaneously go to self-organizing, and evolve into primitive life.

Coilia nasus is a typical anadromous migratory fish in the lower reaches of the Yangtze River. Every year, C. nasus cluster offshore and swim upstream along the Yangtze River into the tributaries and lakes in the middle and lower reaches of the Yangtze River to breed. In this study, female C. nasus collected as the subjects from Chongming section in Shanghai, Taizhou section in Jiangsu and Anqing section in Anhui. The ovaries were used for examining in tissue sections and researching of gene expression including follicle stimulating hormone receptor (fshr), luteinizing hormone receptors (lr), kisspeptin-1 (kiss1) and forkhead box l2 (foxl2) related to the reproductive development, and the estrogen (estradiol, E2) and progesterone (17α,20β-dihydroxy-4-pregenen-3-one, 17α,20β-DHP) were also analyzed in serum levels. The results showed that, first, the growth period of oocytes was small in stage II of ovarian development, in which both E2, 17α,20β-DHP levels and gene expression were low. Then, in stage Ⅲ, the growth period of oocytes were become large, as well as the yolk granules and oil droplets began to appear. Simultaneously, E2 and expression of kiss1 and foxl2 were significantly elevated. Finally, stage Ⅳ was the period of large accumulation of nutrients in oocytes, and 17α,20β-DHP level and expression of fshr and lhr were significantly elevated. The results have enriched the theoretical study of ovarian development in the natural population of C. nasus, supplemented the biological basis of C. nasus reproduction, and scientifically supported the study of C. nasus population ecology and resource conservation.

Bio-based packaging materials and efficient drug delivery systems are gaining attention, carboxymethyl cellulose (CMC) is one of the most soluble cellulose derivatives, is a good candidate material due to its biocompatibility, biodegradability, and reproducibility. However, CMC-based films are lack of sufficient mechanical properties, limiting its widespread application. In this paper, the molecular interactions between CMC and additives with different molecular structures have been studied with rheological method. The additives are chitosan and cellulose derivatives including O-carboxymethylated chitosan (O-CMCh), N-2-hydroxypropyl-3-trimethylammonium-O-carboxymethyl chitosan (HTCMCh), hydroxypropyltrimethyl ammonium chloride chitosan (HACC), cellulose nanofibers (CNC), and cellulose nanofibers (CNF). The influencing factors, such as molecular structure, concentration of additives and temperature on the rheological properties were studied, which results revealed the information intermolecular interactions. Based on the rheological properties, several systems were selected to prepare films, which show very good transparency, wettability, mechanical properties, biodegradability, and cytotoxicity. These good characteristics of the selected films also proved the good biocompatibility of CMC and chitosan and cellulose derivatives. This work will provide an idea to prepare CMC-based food packaging and effective drug delivery materials with specific properties.

Major depressive disorder (MDD) and generalized anxiety disorder (GAD) exert significant burdens on individuals and society, underscoring the importance of accurate predictions using advanced machine learning (ML) algorithms. Leveraging electronic health records (EHRs) and survey data, these algorithms offer potential in forecasting such mental health conditions. Yet, the precision of these predictions can be compromised by biases or inaccuracies inherent in subjective survey responses. In this research, we assess the reliability of four prominent ML algorithms—Random Forest, XGBoost, Logistic Regression, and Naïve Bayesian—in predicting MDD and GAD. Our dataset encompasses a rich array of information, from biomedical metrics and demographic details to self-reported survey insights. A focal point of our investigation is the algorithms' performance under scenarios with varying degrees of subjective response inaccuracies, such as memory recall biases or subjective interpretation. Our findings reveal that while all algorithms exhibit commendable accuracy with pristine survey data, their performance diverges when faced with erroneous or biased responses. Notably, XGBoost remains stable and excels in identifying true positive cases, even in the presence of such noise. These observations underscore the criticality of algorithmic resilience in mental health prediction, especially when relying on subjective data. The robustness of certain algorithms to noisy inputs positions them as more reliable choices for predicting mental health conditions based on self-reported data, emphasizing the need for careful algorithm selection in such contexts.

Two region asymmetric polymers PR2F and PR1F with three repeat units of A-D-A, π-D-A, and π-D-π along the polymer backbone were attained by polymerizing different fluorinated benzothiadiazole-thiophene units, FBT-T and 2FBT-T units (A–π), with benzodithiophene unit (D), respectively. Here, the new region asymmetric polymers were in contrast to the traditional polymers featuring a D–A or D–π–A–π backbone. Both the region asymmetric polymers showed a low lying of HOMO energy level in relation to that of the PC61BM acceptor and then obtained the high open-circuit voltage of ~1 V in both PR2F and PR1F devices. Bulk-heterojunction devices based on PR2F with difluorinated BT exhibited an appreciable power conversion efficiency (PCE) of 4.73% due to the relatively high and balanced charge carrier mobilities, while the mono-fluorinated BT polymer PR1F-based devices gave a lower PCE of 2.92%. These results indicate that the region asymmetric conjugated polymer is a promising class of materials for polymer solar cell applications, and it is significant to further understand the influence of polymer structure on optoelectronic properties.

Saikosaponin (SS) a is a compound with various pharmacological properties and easily degraded into SSb1 and SSg in acid condition. In present work another two new degradation products of SSa formed under acid hydrolytic condition were detected and isolated by analytical and semi-preparative liquid chromatography technology, furthermore their structures were characterized as hydroxyl-saikosaponin a and SSb2 by spectral analysis, which is not only essential in stability-indicating method development and validation but also could be used as a worst case to assess the analytical method performance of SSa. Moreover their structural transformation pathways were also proposed.

(1) Background: There is a risk of Aflatoxin B1(AFB1) pollution in yellow rice wine[1],threatening human life and health, the risk is a major focus of government attention and social concern.The current detection technology cannot meet the needs of large-scale testing due to the disadvantages of high false positive, cumbersome operating procedures or high cost.Therefore, it is urgent to study and establish a high-sensitivity and high-fast detection method for AFB1 to provide technical support for yellow rice wine quality supervision and risk assessment.; (2) Methods: In this study, three-factor and three-level orthogonal experiments were carried out for oscillation time, reaction temperature and tomography time to determine the best reaction conditions for pretreatment.AFB1 detection was carried out by aflatoxin time-resolved fluorescence immunochromatography technology，Through the ratio of the T signal value of the detection line to the C signal value of the quality control line and the natural logarithmic value of the standard solution concentration[2], a rapid detection technology of time-resolution fluorescence immunochromatography is established.The technology was methodically assessed, the actual yellow rice wine samples were tested, and the results were compared with the HPLC method; (3) Results: The results show that the optimal reaction conditions for pretreatment are: the sample oscillation time is 20min, the sample reaction temperature is 37°C, and the sample chromatography time is 6min. In the actual sample detection of yellow rice wine, The time-resolved fluorescence immunochromatography detection technology established in this study detects AFB1. The detection limit is 0.3 μg·kg-1,The linear range is 0.8-12.0μg·kg-1,The linear equation of the corresponding standard curve y=-0.1913x+0.5206 (R2=0.9948),The standard deviation is 0.029.The results of the in-batch accuracy and precision of this method show that the addition and recovery rate is 77.9% - 105.7%,The coefficient of variation is in 4.5% - 10.3%; Inter-batch accuracy and precision test results show that the addition recovery rate is75.9% - 85.8%,the coefficient of variation is in 8.1% - 13.9%,explain that the detection technology has good accuracy and precision.Compared with HPLC, the relative error is less than 10%,It shows that aflatoxin time-resolution fluorescence immunochromatography technology is in good agreement with the test results of national standard methods; (4) Conclusions:he rapid detection technology of time-resolution fluorescence immunochromatography of AFB1 in yellow rice wine is easy to operate with fast detection speed, high sensitivity, good repeatability and stability, and has broad application prospects.

Clarifying the distribution of temperature and pressure in the wellbore and cavern during hydrogen injection and extraction is crucial for quantitatively assessing cavern stability and wellbore integrity. This paper establishes an integrated flow and heat transfer model for the cavern and wellbore during hydrogen injection and production, analyzing the variations in temperature and pressure in both the wellbore and the cavern. The specific conclusions are as follows. (1) The temperature and pressure parameters of hydrogen and natural gas within the chamber and wellbore were compared. Under identical injection and production conditions, the temperature of hydrogen in the chamber was 10°C higher than that of natural gas, and 16°C higher in the wellbore. The pressure of hydrogen in the chamber was 2.9 MPa greater than that of natural gas, and 2.6 MPa higher in the wellbore. (2) A comparative analysis was conducted on the impact of surrounding rock’s horizontal and numerical distance on temperature during hydrogen and natural gas injection processes. As the distance from the cavity increases, from 5 to 15 meters, the temperature fluctuation in the surrounding rock diminishes progressively, with the temperature effect in the hydrogen storage chamber extending at least 10 meters. (3) The influence of rock thermal conductivity parameters on temperature during the processes of hydrogen injection and natural gas extraction is compared. The better the thermal conductivity, the deeper the thermal effects penetrate the rock layers, with the specific heat capacity having the most significant impact.

A new power receiving unit (PRU) is proposed in this paper for the resonant wireless power transfer (WPT), which is characterized by the capability of attracting high power from the power transmitting unit (PTU). The resonant WPT is designed for delivering the electrical power to the PRU attached on an electrical vehicle (EV) chassis 50cm away from a PTU installed on the ground. The proposed PRU uses only the passive elements such as inductors, diodes and the capacitors, which needs no initial power from the EV. It is then applicable for charging a battery to several hundred volts for even a first-time charging battery. At a switching frequency of the resonant WPT in the experiment being 4MHz, the proposed PRU behaves itself as a negative impedance converter (NIC) in the subharmonics of 4MHz. The NIC effect plus the subharmonic oscillation causes an instability current charging the battery connected to the PRU. In this paper, we simulated the PRU and performed the experiment. The experiment demonstrates a battery charging of 150W from 50cm away using three D-mode GaN HEMT transistors via the instability current ramp. The power transfer efficiency (PTE) improved as the power delivered to load (PDL) goes higher. The best power transfer efficiency (PTE) is 65% in the present findings. The simulation analysis shows that the circuit allows itself be used to much higher power transfer when it is implemented with more GaN HEMT transistors connected in parallel. The theoretical derivation of the PRU circuit is also used to support both the experimental and simulation results.

To understand the molecular mechanism underlying yellowing in pineapples during ripening, coupled with alterations in fruit quality, comprehensive metabolome and transcriptome investigations were carried out. These investigations were conducted using the pulp samples collected at three distinct stages of maturity: young fruit (YF), mature fruit (MF), and fully mature fruit (FMF). This study revealed a noteworthy increase in the levels of total phenols and flavones, coupled with a concurrent decline in lignin and total acid content, as the fruit transitioned from YF to FMF. Furthermore, the analysis yielded 167 differentially accumulated metabolites (DAMs) and 2194 differentially expressed genes (DEGs). Kyoto Encyclopedia of Genes and Genomes enrichment analysis based on DAMs and DEGs revealed that the biosynthesis of plant secondary metabolites, particularly the flavonol, flavonoid, and phenypropanoid pathways, plays a pivotal role in fruit yellowing. Additionally, a comprehensive regulatory network encompassing genes that contribute to metabolisms of flavones, flavonols, lignin, and organic acids was proposed. This network sheds light on the intricate processes that underlies fruit yellowing and quality alterations. These findings enhance our understanding of the regulatory pathways governing pineapple ripening and offer valuable scientific insight into the molecular breeding of pineapples.

Viruses can induce the fusion of infected and neighboring cells, leading to the formation of syncytia. Cell-cell fusion is mediated by viral fusion proteins on the plasma membrane of infected cells that interact with cellular receptors on neighboring cells. Viruses use this mechanism to spread rapidly to adjacent cells or escape host immunity. For some viruses, syncytium formation is a hallmark of infection and a known pathogenicity factor. For others, the role of syncytium formation in viral dissemination and pathogenicity remains poorly understood. Human cytomegalovirus (HCMV) is an important cause of morbidity and mortality in transplant patients and the leading cause of congenital infections. Clinical HCMV isolates have broad cell tropism but differ in their ability to induce cell-cell fusions, and little is known about the molecular determinants. We developed a system to analyze HCMV glycoprotein B (gB) variants in a defined genetic background. HCMV strains TB40/E and TR were used as vectors to compare the fusogenicity of six gB variants from congenitally infected fetuses with those from three laboratory strains. Five of them conferred the ability to induce fusion of MRC-5 human embryonic lung fibroblasts to one or both backbone strains, as determined by a split GFP-luciferase reporter system. The same gB variants were not sufficient to induce syncytia in infected ARPE-19 epithelial cells, suggesting that additional factors are involved. The system described here allows a systematic comparison of the fusogenicity of viral envelope glycoproteins and may help to clarify whether fusion-promoting variants are associated with increased pathogenicity.

The enterohemorrhagic Escherichia coli (EHEC) O157: H7 EspF is known to be a multifunctional effector that triggers several damage processes in the host cells. However, in the process of EHEC O157: H7 infection, the interactions between EspF, its N- or C-terminus, and host proteins are still unclear. In this work, we use co-immunoprecipitation combined with mass spectrometry (CoIP-MS) to screen the interactions between EspF/EspF-N/EspF-C terminus and host proteins. A total of 311 host proteins are analyzed. The N-terminus of EspF is found to interact with 192 proteins, whereas 205 proteins interact with the C-terminus. These proteins are mainly involved in RNA splicing, endoplasmic reticulum stress, and a variety of metabolic signaling pathways. Surprisingly, MS results reveal that EspF can also phosphorylate H2AX, suggesting that EspF may directly mediate DNA damage. Here, by western blot and immunofluorescence (IF), we verified that EspF can cause phosphorylation of H2AX and mediates cell multi-nuclearation and cell hypertrophy. Furthermore, we verify here for the first time that SMC1 interacts with EspF -C-terminus, and provide evidence that EspF increases p-SMC1 levels. p-SMC1 is known to influence S-phase cell cycle arrest and usually increases during periods of DNA damage. Our work revealed a novel interaction between EspF and the host protein SMC1 and lays a foundation for further research on EspF-mediated host DNA damage, apoptosis, and even colorectal carcinogenesis.

Three carbon-chain extension genes associated with fatty acid synthesis in cotton, namely GhKAR, GhHAD, and GhENR, play important roles in oil accumulation in cotton seeds. In the present study, these three genes were cloned and characterized. The expression patterns of GhKAR, GhHAD and GhENR in the high seed oil content cultivars 10H1007, 10H1014, and 10H1041 differed somewhat compared with those of 2074B with low seed oil content at different stages of seed development. GhKAR showed all three cultivars showed higher transcript levels than that of 2074B at 10, 40 and 45 DPA. The expression pattern of GhHAD showed a lower transcript level than that of 2074B at both 10 and 30 DPA but higher transcript level than that of 2074B at 40 DPA. GhENR showed a lower transcript level than that of 2074B at both 15 and 30 DPA. The highest transcript levels of GhKAR and GhENR were detected at 15 DPA in 10H1007, 10H1014, and 10H1041 compared with 2074B. From 5 to 45 days post anthesis (DPA) cotton seed, the oil content accumulated continuously in the developing seed. Oil accumulation reached the peak at 40 DPA to 45 DPA and slightly decreased in mature seed. In addition, GhKAR and GhENR showed different expression patterns in fiber and ovule development processes, in which they showed high expression levels at 20 DPA during fiber elongation stage, but their expression level peaked at 15 DPA during ovule development processes. These two genes showed the lowest expression levels at the late seed maturation stage, while GhHAD showed peak at 10 DPA of fiber development. Compared to 2074B, the oil contents of GhKAR and GhENR overexpression lines increased 1.05~1.08 folds. These results indicated that GhHAD, GhENR and GhKAR were involved in both seed oil synthesis and fiber elongation with dual biological functions in cotton.

Mercury (Hg) is a toxic element impacting on biological systems and ecosystems. Because the toxicity of Hg species is highly dependent on concentration levels and chemical forms, sensitive identification of chemical forms for Hg, i.e., Hg speciation, is of major significance in providing meaningful information about the source of Hg exposure. In this study, a microfluidic-based device made of high clarity poly(methyl methacrylate) (PMMA) was fabricated. Then titanium dioxide nanoparticles (nano-TiO2) were attached to the treated channel interior with the aid of poly(diallyldimethylammonium chloride) (PDADMAC). After coupling the nano-TiO2-coated microfluidic-based photocatalyst-assisted reduction device (the nano-TiO2-coated microfluid-ic-based PCARD) with high-performance liquid chromatography (HPLC) and inductively coupled plasma-mass spectrometry (ICP-MS), a selective and sensitive hyphenated system for Hg specia-tion was established. Validation procedures demonstrated that the method could be satisfactorily applied to the determination of mercuric ion (Hg2+) and methylmercury ion (CH3Hg+) in both human urine and water samples. Remarkably, the zeta potential measured clearly indicated the PDADMAC-capped nano-TiO2 with predominance of positive charges indeed provided steady force for firm attachment to the negatively charged device channel. The cause for the durability of the nano-TiO2-coated microfluidic-based PCARD was clarified thus.

In a dual-inertia system based on permanent magnet synchronous motor (PMSM), the elastic transmission mechanism, such as reducer and coupling, is prone to mechanical resonance, which reduces the precision of servo system transmission. Model prediction and introduction of state feedback are effective methods to suppress mechanical resonance, but the control parameters de-pend on the mechanical parameters of the system. Therefore, mechanical parameter identification is very necessary. In this paper, a forgetting factor recursive least square method is used to identify the mechanical parameters of the dual-inertia elastic system. Firstly, the mathematical model of the dual-inertia system is established and reasonably simplified. Then, the discrete function of the identification algorithm is constructed, and the motor speed and electromagnetic torque are sam-pled to achieve the on-line identification of the main mechanical parameters of the dual-inertia system, and the influencing factors of the identification accuracy are analyzed. Finally, simulations and experiments are carried out to verify the effectiveness of the algorithm.

Simple summary: The noninvasive differentiation of hepatocellular carcinoma (HCC) from intrahepatic cholangiocarcinoma (ICC) remains challenging. In recent years, the number of studies on the application of radiomics in liver cancer has grown dramatically. However, there have been very few studies on the differentiation of HCC from ICC based on multisequence magnetic resonance imaging (MRI) radiomics. This study aimed to investigate the efficacy of a radiomic model based on preoperative fat suppression T2-weighted imaging (FS-T2WI) and dynamic contrast-enhanced MRI features in the arterial phase (A) and portal venous phase (P) for the differentiation of HCC from ICC. Abstract: The purpose of this study was to investigate the efficacy of magnetic resonance imaging (MRI) radiomics in differentiating hepatocellular carcinoma (HCC) from intrahepatic cholangiocarcinoma (ICC). The clinical and MRI data of 129 pathologically confirmed HCC cases and 48 ICC cases from April 2016 to December 2021 at the Affiliated Hospital of North Sichuan Medical College were retrospectively analyzed. Included cases were randomly divided at a ratio of 7:3 into a training group of 124 cases (90 HCC cases and 34 ICC cases) and a validation group of 53 cases (39 HCC cases and 14 ICC cases). Radiomic features were extracted from axial fat-suppression T2-weighted imaging (FS-T2WI) and axial arterial-phase (A) and portal-venous-phase (P) dynamic contrast-enhanced MRI sequences, and the corresponding datasets were generated. The least absolute shrinkage and selection operator (LASSO) method was used to select the best radiomic features. Logistic regression was used to establish a radiomic model for each sequence (FS-T2WI, A, and P models) and a joint model (M model) integrating the radiomic features of all the sequences. The performance of each model was evaluated using the area under the receiver operating characteristic curve (AUC). The AUC of the FS-T2WI, A, P, and M models for distinguishing HCC from ICC was 0.693, 0.863, 0.818, and 0.914 in the training group and 0.690, 0.784, 0.727, and 0.802 in the validation group, respectively. The results of this study suggest that MRI-based radiomics may help noninvasively differentiate HCC from ICC. The model integrating the radiomic features of multiple sequences showed further improvement in performance.

It is imperative to conduct experimental studies on the seepage behavior of gas-bearing coal under cyclic dynamic loading conditions. This paper focuses on the evolution of coal permeability under the combined effects of dynamic loading, static loading, and gas adsorption. The principal conclusions are as follows. (1) As the frequency and amplitude of dynamic loading increase, the development of pore and fissure structures within the coal body becomes increasingly pronounced during dynamic loading cycles, resulting in a gradual rise in permeability. Notably, as the coal approaches its yielding stage, the permeability can increase by up to 47%. (2) The permeability curve is divided into four regions: the compaction reduction zone, the oscillation zone, the gradual recovery zone, and the abrupt increase zone of failure. Ultimately, in the failure phase, the permeability surges dramatically, potentially reaching 4 to 5 times the initial permeability. (3) When the static load stage is constant, the rate of change in permeability of the coal under dynamic loading decreases with increasing adsorption amount. When the adsorption amount is constant, the rate of change in permeability of the coal under dynamic loading increases with the increase in static load stress stage, with the maximum increase reaching 75.2%. It can be concluded from the rate of change in permeability and the dynamic loading sensitivity coefficient that the permeability of the coal is highly sensitive to cyclic dynamic loading, with increased sensitivity associated with larger static load stages and decreased sensitivity with greater adsorption amounts.

Peroxydisulfate activation has garnered a lot of interest due to its benefits of broad adaptability, strong anti-interference ability, and powerful oxidation capacity. Due to their low cost and potent action, carbon materials are new green catalysts that have garnered interest. In order to effectively degrade organic contaminants in water by activating peroxydisulfate, carbon compounds are currently commonly used. Better metal ions for activating peroxydisulfate include Fe2+ and Co2+, and these metal ions can be encapsulated in carbon compounds made by calcinating metal organic framework（MOFs ）as precursors. The synthesis of carbon compounds from MOF precursors as well as their effectiveness and mechanism in reducing organic pollutants in peroxydisulfate systems. The following are the specific research contents: NH2-MIL-101 (Fe/Co) bimetallic MOFs material was synthesized by hydrothermally altering the Fe3+ to Co2+ ratio, followed by the carbonization of Fe/Co-CNs. XRD, SEM, TEM, FT-IR, and XPS were used to analyze the materials' morphology, structure, and chemical make-up. The results demonstrate that Fe/Co-CNs-2 (Co2+ doping concentration approaches 20%) has a stable three-dimensional carbon structure and effectively incorporated Co ions into the carbon material. The simultaneous encapsulation of both Fe and Co metals by the three-dimensional carbon skeleton ensures material stability and reaction activity. Tetracycline hydrochloride was reported to degrade more quickly in Fe/Co-CNs-2 than in other Co2+ doping concentrations within 30 minutes of peroxymonosulfate（PMS） activation. The degradation rate of Fe/Co-CNs-2 for 20 mg/L TC was determined to be 93.34% within 30 minutes under the following conditions: Fe/Co-CNs-2 concentration of 0.1 g/L, PMS concentration of 0.2 g/L, and pH of 7.33. The catalyst also demonstrates good stability. Last but not least, the Fe/Co-CNs-2 free radical quenching experiment revealed that singlet oxygen (1O2) is the primary active species in the reaction system, and a potential mechanism was examined by combining degradation and XPS analysis.

We tested selecting data randomly or proportionally in class imbalanced sample. Collecting data into the training and test set according to the initial ratio of QSOs, galaxies and stars were rec-ommended. We experimented using the original imbalanced data or introducing the class balance technologies: SMOTE, SMOTEENN, SMOTETomek, ADASYN, BorderlineSMOTE1, Border-lineSMOTE2, and RandomUndersampling. The SMOTEENN performed the best in the Sample 1. The LightGBM, CatBoost, XGBoost, and RF were compared when adopting the SMOTEENN using the petroMag_u, petroMag_g, petroMag_r, petroMag_i, petroMag_z, J, H, Ks, W1, W2, W3, W4 magnitudes as features. All of the precisions or recalls exceeded 0.94. The RF cost a little more time than the other three algorithms, but resulted in the best evaluating indicators. Utilizing the SMOTEENN +RF technology, the precision, recall and f1-score for QSOs (galaxies, stars) could achieve 0.98 (0.99, 0.98), 0.99 (0.96, 1.00), 0.98 (0.97, 0.99) respectively in Sample 1. Utilizing the SMOTEENN +RF technology, the precision, recall and f1-score for QSOs (galaxies, stars) could achieve 0.94 (0.96, 0.96), 0.98 (0.90, 0.97), 0.96 (0.93, 0.97) using the petroMag_u, petroMag_g, petroMag_r, petroMag_i, petroMag_z, W1, W2, W3, W4 magnitudes as features.

This study explores the implementation of an interdisciplinary curriculum in product and media design education and its impact on knowledge innovation and competency development. The curriculum is based on scaffolding theory, incorporating design proposals, workshops, digital design, marketing tests, and marketing activities guided by teachers and mentors from a branded ceramic workshop. The research findings demonstrate that the interdisciplinary curriculum facilitates knowledge innovation and fosters the development of students' professional skills, creativity, and problem-solving skills. The study also highlights the importance of stable scaffolding, including artefact, peer, and teacher support, which significantly contributes to cultivating transformational competencies, as outlined in the 2030 OECD Learning Compass. Additionally, the collaboration with Shanshing Four Seasons Celadon Studio on a patented ceramic product, "Funny Monkey," is a tangible example of the journey towards a triple-helix knowledge economy. This research underscores the importance of interdisciplinary curricula in promoting knowledge innovation and integrating transformational competencies in education. Scaffolding theory provides practical guidance for student learning and teaching strategies, presenting a sustainable roadmap for developing interdisciplinary curricula and offering a concrete and transferable pedagogical prototype for educational innovation.

Rice is the most important food crop in Cambodia and its production is the most organized food production system in the country. The main objective of this study is to measure technical efficiency (TE) of Cambodian rice production and also trying to identify core influencing factors of rice TE at both national and household level, for explaining the possibilities of increasing productivity and profitability of rice, by using translog production function through Stochastic Frontier Analysis (SFA) model. Four-years dataset (2012-2015) generated from the government documents was utilized for the national analysis, while at household-level, the primary three-years data (2013-2015) collected from 301 rice farmers in three selected districts of Battambang province by structured questionnaires was applied. The results indicate that level of rice output varied according to the different level of capital investment in agricultural machineries, total actual harvested area, and technically fertilizers application within provinces, while level of household rice output varied according to the differences in efficiency of production processes, techniques, total annual harvested land, and technically application of fertilizers and pesticides of farmers. The overall mean TE was estimated at 78.4% (national-level) and 34% (household-level), indicates that rice output has the potential of being increased further by 21.6% (national production) and 66% (household) at the same level of inputs and technology if farmers had been technically efficient. The TE also recorded -7% decreasing rate at the national-level and -14.3% at household-level due to highly affected of natural disasters and various environmental and social factors during the study periods.

Animal personalities play a crucial role in invasion dynamics during alien species invasions. The behavioral strategies adopted by native species varied among personalities when facing an invasion by alien species, just as the invasive species exhibited variations in behavior strategies across different personalities during the invasion process. However, the effects of personality interactions between native species and invasive species on behavior and growth are rarely illustrated. We used the globally invasive freshwater turtle Trachemys scripta elegans and the native freshwater turtle Mauremys reevesii to investigate how the personality combinations of native and invasive turtles would impact the foraging strategy and growth of both species. We found that M. reevesii exhibited bolder and more exploratory personalities than T. scripta elegans. The foraging strategy of M. reevesii was mainly affected by the personality of T. scripta elegans, while the foraging strategy of T. scripta elegans was influenced by both their own personality and M. reevesii's personality. In addition, we did not found that the personality combination would affect the growth of either T. scripta elegans or M. reevesii. Difference in foraging strategy may be due to the competitive advantage of invasive species and variations in the exploration-exploitation foraging strategy among different personalities. Overall, our results reveal the mechanisms of personality interaction effects on the foraging behavior of both native and invasive species during alien species invasion and provide empirical evidence to help understand the effects of personality in invasion dynamics.

High-methoxyl apple pectin (AP) derived from apple was employed as the main ingredient facilitating rheological modification features for developing dysphagia-friendly fluidized alimentary matrices. Xanthan gum (XG) was also included as a composite counterpart to modify the viscoelastic properties of the thickened system under different thermal processes. The results indicate that AP is extremely sensitive to thermal processing, and the viscosity is greatly depleted under a neutral pH level. Moreover, the inclusion of calcium ions echoed a modification effect on the rheological properties of AP, and both the elastic property and viscosity value are promoted after thermal processing. The modification effect of viscoelastic properties (Gʹ and Gʹʹ) is observed while XG is incorporated into the composite formula. By promoting the XG ratio from 7: 3 to 6: 4 (AP: XG), it triggers the rheological transformation from a liquid-like form to a solid-like state, and the viscosity value shows that the AP-XG composite system exhibits better thermal stability after thermal processing. The ambient modifiers of pH (pH &lt; 4) and calcium chloride concentration (7.5%) with an optimal AP-XG ratio of 7:3 lead to weak-gel-like behavior (Gʹʹ &lt; Gʹ), helping to maintain the texture properties of dysphagia-friendly features similar to those prior to the thermal processing.

The process of oxygenic photosynthesis is primarily driven by two multiprotein complexes known as photosystem II (PSII) and photosystem I (PSI). PSII facilitates the light–induced reactions of water–splitting and plastoquinone reduction, while PSI functions as the light–driven plastocyanin-ferredoxin oxidoreductase. In contrast to the highly conserved structure of PSII among all oxygen–evolving photosynthetic organisms, the structures of PSI exhibit remarkable variations, especially for photosynthetic organisms that grow in special environments. In this review, we make a concise overview of the recent investigations of PSI from photosynthetic microorganisms including prokaryotic cyanobacteria and eukaryotic algae from the perspective of structural biology. All known PSI complexes contain a highly conserved heterodimeric core; however, their pigment compositions and peripheral light-harvesting proteins are substantially flexible. This structural plasticity of PSI reveals the dynamic adaptation to environmental changes for photosynthetic organisms.

Little is known about the association between equol and bioavailable testosterone (BT) in adults. We examined the associations of urinary equol concentrations with serum total, bioavailable and free testosterone (FT), dehydroepiandrosterone sulfide (DHEAS), free androgen index (FAI) and sex hormone-binding globulin (SHBG) concentrations. This cross-sectional study included 1904 women aged 59.7 years. Urinary equol and serum sex hormone concentrations were measured. Overall, urinary equol tended to be inversely associated with bioactive forms of androgenic indices (BT, FT or FAI) but not with total testosterone (TT) or DHEAS. Urinary equol was also positively associated with SHBG. In multi-covariate-adjusted analyses stratified by menopausal status, graded and inverse associations between urinary equol and bioactive forms of androgenic indices (BT, FT and FAI) were observed in postmenopausal women (all p-trends <0.05), but not in premenopausal women. A significant positive association between urinary equol and SHBG was observed only in postmenopausal women. No significant associations were observed between urinary equol and TT or DHEAS in either group. A path analysis indicated that these associations of equol with androgens in postmenopausal women might be mediated by SHBG. Our findings indicated urinary equol exhibited graded and inverse associations with BT or FT but not TT in women.

Terrestrial plant resources are becoming increasingly scarce; moreover, the development of science and technology has facilitated the exploration of marine ecosystems. We isolated and identified six novel (1–6) and six (7–12) known secondary metabolites of Alternaria sp MCCC 3A00467 by chromatographic and spectroscopic techniques and investigated their antitumor activities in human myeloma (U266), liver cancer (HepG2), and lung cancer (A549) cells by the MTT assay. Among these compounds, the new compounds 2, 3 and 4 exhibited excellent anticancer activities with IC₅₀ values of 21.98, 24.99 and 14.78 μg/mL, respectively. These compounds obtained from a marine source have the potential to be developed into novel anticancer drugs.

The arguments on the origin and evolution of the evergreen broad-leaved forest in eastern Asia, especially in the evolutionary process, exist generally, even contrary in some cases. The origin and evolution of the flora of eastern Asia, the formation time of Asian monsoon, and the implications from phylogenetic and molecular biogeographic studies in some important taxa, as well as in palaeobotanical evidences, are debatable. Most researches from different disciplines suggested that the monsoon in Miocene is a key to diversification of eastern Asian flora and its evergreen broad-leaved forest. The common view is that the evergreen broad-leaved forest of East Asia is closely related to the monsoon intensity and developments, which are caused by the uplift of Himalaya-Tibet, during or after the mid-Miocene. The analysis on the floristic elements show that the present subtropical evergreen broad-leaved forest in eastern Asia could have an early or ancient tropical origin and a tropical Asian affinity, but their species are dominated by the Chinese endemic or eastern Asian distribution, many of which are the tropical sister ones. The time of Himalayan uplift and intensity of monsoon climate is believed the key for the formation of the evergreen broad-leaved forest in eastern Asia. Combined existing palaeobotanical findings, the uplift of Himalayas and the formation of monsoon climate, as well as floristic elements of the subtropical evergreen broad-leaved forest, we believe that it was evolved from a Asian tropical rain forest after mid-Miocene in southeastern region of eastern Asia, while the ancient subtropical evergreen broad-leaved forests in southwestern region continuously evolved into the present subtropical ones.

To address the challenges associated with the difficult electromagnetic (EM) scattering computations of anisotropic dielectric-coated metallic composite targets, we proposed an efficient hybrid algorithm for simulating the EM scattering of complex targets with anisotropic dielectric coatings. This method, based on Impedance Boundary Condition (IBC), utilizes surface impedance vectors to describe the EM properties of the dielectric. It fully leverages the respective advantages of the low-frequency Method of Moments (MoM) and the high-frequency Physical Optics (PO) to achieve high-precision and rapid EM simulation of anisotropic dielectric-coated metallic composite targets. Employing boundary conditions and equivalent principles, we equivalently transform the EM scattering problem of targets with thin dielectric coatings into the radiation problem of equivalent EM current on impedance surfaces. This enables the high-precision and rapid calculation of Radar Cross Sections (RCS) for complex targets with anisotropic dielectric coatings. Using examples such as a square plate structure, a simplified aircraft, and a complex satellite model, the simulation results exhibit a high degree of agreement with full-wave numerical solutions and demonstrate a significant advantage in computational resources. This research convincingly demonstrates the accuracy and effectiveness of the proposed method.

The information data accuracy affects the working reliability of production management system directly. Mobile equipment is an important part of integrated manufacturing system, in the course of its works, due to the complex working environment and the dynamic change of its position, it lead to the important problem of information detection distortion. Because the application of fractional differential operator has the dual functions of enhancing signal strength and reducing data error, we puts forward a data processing method of obtaining production information data of various accuracy by changing the parameters of fractional differential operator. Establish a mobile equipment detection data fusion processing model based on fractional order partial differential equations and apply it in the processing experiment of mobile equipment testing information detection data in an integrated manufacturing system, the feasibility and effectiveness of the method are verified. We conclude that the fractional order partial differential equations used in the processing of mobile equipment monitoring information data of an integrated manufacturing system has the function of obtaining production information data of various accuracy, which are of great significance to improve the working reliability in integrated manufacturing system. which is of great significance to improve the working reliability and scientific decision of integrated manufacturing system.

In engineering practice, various types of information data are affected by many factors during the collection process. For example, information data measurement errors are caused by equipment performance and the working environment. During the transmission of detection information, the signal distortion caused by energy loss and signal interference causes unpredictable detection errors in the collected information data. Through the study of fractional calculus theory, it was found that it is suitable for studying nonlinear, non-causal, and non-stationary signals, and has the dual functions of improving detection information and enhancing signal strength. Therefore, under the influence of many factors, we applied the fractional difference algorithm to the field of information data processing. Multi-sensor detection data fusion algorithm based on the fractional partial differential equation was adopted to establish its online detection data. A multi-sensor detection data fusion algorithm based on a fractional partial differential equation is established, which effectively fuses the information data detection errors caused by various influencing factors and greatly improves the detection accuracy of information data. The effectiveness of this method is proved through its application in an experiment.

In this paper, a novel permanent magnet-assisted synchronous reluctance machine (PMASynRM) with rare-earth PMs and ferrite magnets is proposed. The performance of PMASynRM is discussed with respected to the different magnet ratio of rare-earth PMs and ferrite magnets. Some characteristics including the flux density, output torque, cogging torque, output power, power factor, torque ripple, loss, efficiency, and demagnetization are calculated by 2-D finite element analysis (FEA). The analysis results show that the excellent performance can be obtained by using hybrid magnet of rare-earth PMs and ferrite magnets with the suitable magnet ratio, and provide some desirable cost-performance trade-off.

This study presents a numerical analysis of rock deformation and damage behaviors induced by dynamic loadings, specifically focusing on the fracturing of tight oil reservoirs. An elastoplastic model based on finite element methods was utilized to simulate the effects of varying loading and perforation parameters. Three distinct scenarios were modeled: a single perforation, boundary loading on three sides, and multiple perforations, each providing unique insights into the mechanical responses of the rock material. The analysis revealed that dynamic effects are highly localized around perforations and loaded boundaries across all scenarios. Acceleration magnitudes are captured with rapid attenuation observed as the distance from the perforation increased. This indicated that the highest stress concentrations and deformation occurred close to the points of loading or perforation. Strain rate analysis in the x direction showed significant fluctuations near the perforations, reflecting intense stress redistributions and compressive deformation, especially prominent in the scenario with multiple perforations. Plastic strain, representing irreversible damage, was found to concentrate near perforation tips and loaded boundaries. However, the pattern of plastic strain accumulation varied: in the small domain scenario with boundary loading, plastic strain did not immediately accumulate next to the loading boundary, whereas in scenarios with single and multiple perforations, damage developed from the loading boundaries. These findings highlight the need for precise control in perforation and dynamic loading processes to manage stress and deformation effectively. It is concluded that optimizing perforation patterns and loading strategies can enhance reservoir stimulation efficiency while minimizing unintended damage to the surrounding formation.

A two-step, one-pot synthesis of 3-substituted 1H-dibenzo[e,g]indazoles in good to high yields via a LiOtBu-promoted intramolecular cyclization of 2’-alkynyl-biaryl-2-aldehyde N-tosylhydrazones, formed in situ by the reactions of 2’-alkynyl-biaryl-2-aldehydes with p-methylbenzenesulfonohydrazide was developed. Two kinds of hydrogen bonds forming in several products were observed in DMSO-d6 solution in 1H NMR spectroscopic data, which were assigned to the formation of solvated products and dimers of products, supported by the studies of density functional theory (DFT).

Light sources tend to affect images captured in any automatic optical inspection (AOI) system. In this study, the effectiveness of metal-halide lamps, quartz-halogen lamps, and LEDs as the light sources in AOI systems for the detection of the 3rd and 4th layers electrodes of thin-film-transistor liquid crystal displays (TFT-LCDs) is examined experimentally. The results show that the performance of LEDs is generally comparable or better than that of metal-halide and quartz-halogen lamps. The best optical performance is by the blue LED due to its spectrum compatibility with the time-delay-integration charged-coupled device (TDI CCD) sensor and its better spatial resolution. The images revealed by the blue LED are sharper and more distinctive. Since current LEDs are more energy efficient and environmentally friendly, using LEDs as the light source for AOI is very beneficial. As the blue LED performs the best, it should be adopted for AOI using TDI CCD sensors.

Among colours, the green has the most sensitivity in human vision so that green defects on displays can be effortlessly perceived by a photopic eye with the most intensity in the wavelength 555 nm of the spectrum. With the market moving forward to high resolution, displays can have resolutions of 10 million pixels. Therefore, the task detects the appearance the panel using ultra-high resolutions in TFT-LCD. The machine vision associated with reflective chromaticity spectrometer quantises the defects are explored, such as blackening and whitening. The result shows the significant phenomena to recognize the non-uniformity film-related chromatic tendency. In contrast, the quantitative assessment illuminates that the chromaticity CIE xyY at 0.001 is a just noticeable difference (JND) and detects even more sensitivity. Moreover, an optical device associated with a 198 Hg discharge lamp calibrates the spectrometer accuracy.

Chrysoeriol (CHE) is a flavonoid substance that exists in many plants and has various physiological and pharmacological effects, including anti-inflammatory, antioxidant, anti-tumor, and protective activity, especially for the cardiovascular system and liver. This study aimed to analyze the results and possible mechanisms of CHE on early porcine embryo development. Adding CHE to the culture media can improve the development quality of early porcine embryos. CHE significantly increased the blastocyst rate and total cell number of embryos in vitro. The apoptosis of blastocyst in CHE-treated culture also decreased significantly compared with untreated culture. Furthermore, CHE downregulated intracellular reactive oxygen species (ROS) and increased glutathione (GSH) in embryos. CHE was also shown to improve the activity of mitochondria and inhibit the occurrence of autophagy. In addition, antioxidant-related genes (SOD1, SOD2, and CAT) and cell pluripotency-related genes (SOX2, OCT4, and NANOG) were upregulated, while those related to apoptosis (Caspase 3) and autophagy (LC3B) showed a downward trend after supplementation with CHE. These results indicated that CHE improved the development of porcine embryos in vitro by reducing oxidative stress and autophagy levels.

COX II containing a dual core CuA active site is one of the three core subunits of mitochondrial Cco, which plays a significant role in the physiological process. In this report, the full-length cDNA of COXⅡ gene was cloned from Sitophilus zeamais, which had an ORF of 684 bp encoding 227 amino acids residues. The predicted COXⅡ protein had a molecular mass of 26.2 kDa with pI value of 6.37, and multiple sequence alignment and phylogenetic analysis indicated that Sitophilus zeamais COXⅡ had high sequence identity 78.51% with the COXⅡ of other insect species, especially similarity to sitophilus oryzae. This gene was subcloned into the prokaryotic expression vector pET-32a, and induced by IPTG in E.coli Transetta (DE3) expression system. Finally the COXⅡ with 6-His tag was purified using affinity chromatography with Ni²⁺-NTA agarose. WB showed the recombinant COXⅡ was about 44 kD, and the concentration of fusion protein was 50μg/mL. UV-spectrophotometer and infrared spectrometer analysis showed that recombinant COXⅡ could catalyze the oxidation of substrate Cytc, and influenced by AITC. It was found that AITC could form a hydrophobic region with COXⅡ protein via molecular docking, besides, a sulfur atom of AITC structure could form a length of 2.9 Å hydrogen bond with Leu-31. These results will provide valuable information for elucidating the role of COXⅡ in Sitophilus zeamais responses to AITC, meanwhile, it will helpful to carry out a point mutation in AITC binding sites for the future research.

Public safety and intelligent surveillance systems critically depend on anomaly behavior detection for effective monitoring. In real-world pedestrian detection scenarios, prevalent challenges such as missed detections, complex background interference, and small target sizes hinder accurate anomaly identification. To address these issues, this study introduces YOLO-ABD, a lightweight method for anomaly behavior detection that integrates small target detection and channel shuffling. This method employs YOLOv8n as the baseline model, incorporating a small target detection mechanism in the Head part and utilizing GSConv convolution in the Backbone to enhance perceptual capability. Additionally, the SimAM attention mechanism is integrated to mitigate complex background interference, thereby improving target detection performance. Evaluation on the IITB-Corridor dataset demonstrated mAP50 and mAP50-95 scores of 89.3% and 60.6%, respectively. Generalization testing on the street-view-gdogo dataset further highlighted the superiority of YOLO-ABD over advanced detection algorithms, underscoring its effectiveness and generalizability. With a relatively small parameter count, YOLO-ABD presents an excellent lightweight solution for pedestrian anomaly behavior detection.