Electrospun ultrathin fibers based on binary compositions of polylactide (PLA) and poly(ε-caprolactone) (PCL) with different ratios of polymer components from 0/100 to 100/0 wt. % were studied. Using a combination of thermal (DSC) and relaxation (EPR) measurements, the effect of biopolymers content on the characteristics of the crystal structure of PLA and PCL and the diffusive rotational mobility of the stable TEMPO radical in the amorphous regions of PLA/PCL compositions was shown. It was revealed that after PLA and PCL blending, significant changes in the degree of crystallinity of PLA, PCL segmental mobility, sorption capacity of the radical as well as activation energy of rotational diffusion in the amorphous regions of PLA/PCL composition are observed. The characteristic region of biopolymers’ composition from 50/50 to 30/70 % PLA/PCL blends ratio was found, where the inversion transition of PLA from dispersive medium to dispersive phase where an inversion transition is assumed when the continuous medium of the PLA transforms into a discrete phase. The performed studies made it possible for the first time to carry out a comprehensive analysis of the effect of the system component ratio on the structural and dynamic characteristics of the PLA/PCL film material at the molecular level.

The retinal pigment epithelium (RPE), which ensures the normal functioning of the neural retina, is a pigmented single-cell layer that separates the retina from the Bruch's membrane and the choroid. There are three main types of pigment granules in the RPE cells of the human eye: lipofuscin granules (LG) containing the fluorescent “age pigment” lipofuscin, melanoprotein granules (melanosomes, melanolysosomes) containing the screening pigment melanin and complex melanolipofuscin granules (MLG) containing simultaneously both types of pigments - melanin and lipofuscin. This review examines the functional role of pigment granules in the aging process and in the development of oxidative stress and associated pathologies in RPE cells. The focus is on the process of light-induced oxidative degradation of pigment granules caused by reactive oxygen species. The reasons leading to increased oxidative stress in RPE cells as a result of oxidative degradation of pigment granules are considered. A mechanism has been proposed to explain the phenomenon of age-related decline in melanin content in RPE cells. The essence of the mechanism is that when the lipofuscin part of the melanolipofuscin granule is exposed to light, reactive oxygen species are formed, which destroy its melanin part. As more melanolipofuscin granules are formed with age and the development of degenerative diseases, the melanin in pigmented epithelial cells ultimately disappears.

(1) Background: Cardiac resynchronization therapy (CRT) is essential for patients with heart failure and ventricular conduction abnormalities. Cardiomyopathy often includes left bundle branch block (LBBB) marked by delayed activation of the LV lateral wall and a widened QRS complex. Following CRT, patients with heart failure and LBBB have better outcomes and quality of life improvements. Various electrocardiographic and clinical parameters are thought to predict this improvement. The Kansas City Cardiomyopathy Questionnaire (KCCQ) is a reliable tool for measuring the quality of life in these patients. (2) Methods: We performed an observational prospective study over 69 individuals diagnosed with cardiac failure and dilatative cardiomyopathy with low FE and major LBBB and analyzed the correlations between patient outcomes after the procedure and the demographic, clinical, and electrocardiographic parameters, which include systolic blood pressure, ECG morphology elements, QRS duration, QRS area and associated comorbidities. (3) Results: Following our analysis a correlation between QRS area, intraprocedural systolic blood pressure, QRS duration and CRT outcomes assessed by the KCCQ score was observed which reflected that CRT has a hemodynamic impact and also affects the severity of ventricular asynchrony.; (4) Conclusions: The significant correlations observed with the KCCQ score show how CRT therapy impacts patients' quality of life, symptom burden, and functional status.

Based on a very fast numerical procedure for the determination of the subsurface stress field beneath frictional contacts of axisymmetric elastic bodies under arbitrary 2D oblique loading, the contact mechanical influences of loading parameters and contact profile geometry on the Smith-Watson-Topper (SWT) fatigue crack initiation parameter in elastic fretting contacts with superimposed normal and tangential oscillations are studied in detail. The efficiency of the stress calculation allows for a comprehensive physical analysis of the multi-dimensional parameter space of influencing variables. It is found that a superimposed normal oscillation of the contact can significantly increase or decrease the SWT parameter, depending on the initial phase difference and frequency ratio between the normal and tangential oscillation. Written in proper non-dimensional variables, the rounded flat punch always exhibits smaller values of the SWT parameter, compared to a full paraboloid with the same curvature, while the truncated paraboloid exhibits larger values. A small superimposed profile waviness also significantly increased or decreased the SWT parameter, depending on the amplitude and wave length of the waviness. While both the load protocol and the profile geometry can significantly alter the SWT parameter, the coupling between both influencing factors is weak.

Tropical cyclones have long been known to be powered by turbulent enthalpy fluxes from the ocean surface and retarded by turbulent momentum fluxes into the surface. Here were review evidence that the development and structure of these storms are also partially controlled by turbulence in the outflow near the storm top. Finally, we present new research that shows that tropical cyclone-like, low-aspect-ratio vortices are most likely in systems in which the bottom heat flux is controlled by mechanical turbulence and the top boundary is insulating.

The paper combines two new original concepts about eco-energetic systems. The first one is related to the M.E.N. (Mega-Eco-Nega-Watt) paradigm, which is based on three different but complementary ecological economic spaces: MEGAWATT, as needed energy, ECOWATT, as ecological energy, and NEGAWATT, as preserved energy, even the renewable energies and technologies, in the context of electrical energy production. The second concept presented in this paper is the eco-energetic efficiency, introduced in order to facilitate a correlation between the energetic efficiency of the system and a necessary, new defined ecological coefficient. The proposed formula for eco-energetic efficiency enables an interesting form of reporting to the different situations in which the input energy, output energy, lost energy and externalities, involved in an energetic process interact to produce energy in a specific energetic system, in connection with the circular economy model. Finally, is presented an original diagram of the energetic chains to produce electricity in a resilience regim, with high eco-energetic efficiency from originating in different primary energetic sources as external (gravitation & solar sources), fuels (classical & radioactive), internal sources and others. Even what kind of energetic sources are used to obtain electricity, as coals, gas, wood, hydropower, nuclear power, wind power, biomass, solar systems, and others, the entire process should be sustainable in what is the transdisciplinary integration of the different representative spheres as energy, socio-economy, ecology (environment), with the main core, sustainable education, inclueding the law and administrative aspects, as necessary fields of the knowledge based society/economy.

A fundamental tool in mathematical physics is the logarithmic Sobolev inequality. A quantitative version proven by Carlen with a remainder involving the Fourier-Wiener transform is equivalent to an entropic uncertainty principle more general than the Heisenberg uncertainty principle. In the stability, the remainder is in terms of an entropy, not a metric. Recently, a stability result for H¹ was obtained by Dolbeault, Esteban, Figalli, Frank, and Loss in terms of an L^p norm. Afterwards, Brigati, Dolbeault, and Simonov discussed the stability problem involving a stronger norm. A full characterization with a necessary and sufficient condition to have H¹ convergence is identified in this paper. Moreover, an explicit H¹ bound via a moment assumption is shown. Also, the L^p stability of Dolbeault, Esteban, Figalli, Frank, and Loss is proven to be sharp.

There is an increasing clinical need to develop novel biomaterials that combine regenerative and biocidal properties. In this work, we present the preparation of silver /silica based glassy bioactive (ABG) compositions via a facile, fast (20h), and low temperature (80 °C) approach and their characterization. The fabrication process included the synthesis of the bioactive glass (BG) particles followed by the surface modification of the bioactive glass with silver nanoparticles. The microstructural features of ABG samples before and after exposure to simulated body fluid (SBF) as well as their ion release behavior during SBF test were evaluated using infrared spectrometry (FTIR), ultraviolet- visible (UV-Vis) spectroscopy, X-ray diffraction (XRD), electron microscopies (TEM and SEM) and optical emission spectroscopy (OES). The antibacterial properties of the experimental compositions were tested against Escherichia coli (E. coli). The results indicated that the prepared ABG materials possess antibacterial activity against E. coli, which is directly correlated with the glass surface modification.

Knowledge regarding the influence of the microbial community in cancer promotion or protection has expanded even more through the study of bacterial metabolic products and how they can modulate cancer risk, which represents an extremely challenging approach for the relationship between intestinal microbiota and colorectal cancer (CRC). This review discusses research pro-gresses in the effect of bacterial dysbiosis from a metabolic point of view, particularly on the bio-chemical mechanisms of butyrate, one of the main short chain fatty acids (SCFAs) with an-ti-inflammatory and anti-tumor properties in CRC. Increased daily intake of omega-3 polyun-saturated fatty acids (PUFAs) significantly increases the density of bacteria that are known to produce butyrate. Omega-3 PUFAs have been proposed as a treatment to prevent gut microbiota dysregulation and lower the risk or progression of CRC.

Semisolid casting can provide excellent castings, but the nature of the pore-forming mechanisms has not been properly clarified. In the current communication, it was suggested that hydrogen precipitated during slurry making might have a decisive role in the formation of both gas and shrinkage porosity. Intensive stirring at the end of the slurry making process may act as a degassing step. Without the intense stirring, structures of primary slurry particles form around the hydrogen pores, strongly affecting pore formation and feeding during the intensification stage.

The retinal pigment epithelium (RPE) is a monolayer of epithelial cells lying between the neural retina and the choroid and is essential for photoreceptor function and viability. Quail Coturnix japonica is a convenient experimental animal model for the study of age and pathological retina processes to an accelerated time regime. The three main types of pigment granules present in the RPE are melanin-containing melanosomes, lipofuscin-containing lipofuscin granules, and mixed melanolipofuscin granules containing both melanin and lipofuscin. It’s known that with aging and pathology in RPE cells the content of melanosomes decreases but lipofuscin and melanolipofuscin granules accumulate. We examined melanolipofuscin granules in macular areas of the quail retina by transmission electron microscopy in young, middle-aged, and old birds, and in middle-aged birds irradiated with blue LED light (450 nm, 4 J/cm2). It has been shown that during photooxidative stress caused by the action of blue light on the quail eye, active fusion of melanosomes and lipofuscin granules occurs with formation of various types, including giant, mixed melanolipofuscin-like granules. Irradiation result in almost twofold decrease in the number of lipofuscin granules and synchronous increase in the number of melanolipofuscin-like granules. Increased accumulation of melanolipofuscin-like granules was also observed in non-irradiated old birds. It is assumed that the decrease in the number of melanosomes in the RPE during aging and photo-oxidative stress is associated with their fusion with lipofuscin granules and subsequent degradation of melanin by reactive oxygen species formed in melanolipofuscin-like granules. The disappearance of melanin deprives the RPE cells of light-filtering and antioxidant protection, and significantly increases the risk of their oxidative stress.

With the interest and attention that the Blockchain and the Distributed Ledger Technologies (DLT) have recently demanded, the technology is advancing at a very high rate. With investors and applications in a wide variety of fields, a lot of funding and efforts are being driven into bringing the technology to everyday use. The community and companies are coming up with new ways to collaborate, which makes the blockchain ecosystem evolve at full tilt. Consequently, this paper’s aim is to review the academic and grey literature and to provide readers with information about the evolution, benefits and challenges of the Public Distributed Ledger Technologies and to discuss the latest solutions, which are being developed for bringing decentralization closer to the mainstream. The paper reviews the Directed Acyclic Graph (DAG) structured distributed ledgers with focus on the Hedera Hashgraph, a novelty DLT bringing a unique consensus algorithm with new use-cases enabled by new cryptoeconomic mechanisms as well as vital services, such as Solidity smart contracts and distributed file storage. Lastly, we are going to explore second-layer network protocols, a major topic for solving the scalability issues, empower Bitcoin and DLTs and also disrupt cryptocurrency exchanges focusing on the Lightning Network.

In this study, graphite, the most stable form of carbon, was examined for its hexagonal crystalline structure with specific dimensions (ao=2.46 Ǻ; co=6.70 Ǻ). Its framework comprises parallel carbon atom planes forming regular hexagons (side length 1.415 Ǻ) and 120° angles between adjacent atoms. Two structural variations exist: hexagonal symmetry (1-2-1-2-1-2 planes) and rhomboidal symmetry (1-2-3-1-2-3 planes). The research aimed to produce high-density graphite utilizing carbonaceous raw materials. Graphite-based materials often exhibit high porosity, necessitating additional treatments. The study successfully obtained mesophase tar pitch (yield: 45%), a pivotal raw material, and high-density graphite. The resulting graphite underwent characterization for physical properties (apparent and real density, porosity and compression strength), demonstrating conformity with existing literature data.

New or in-service truss bridges, with or without upper bracing systems, may display instability phenomena such as general lateral torsional buckling of the upper chord. The buckling of structural elements, particularly in the case of steel bridges, can be associated with the risk of collapse or temporary/permanent withdrawal from service. Buckling poses a significant danger as it often occurs at lower load values compared to those considered during the design phase. Additionally, this phenomenon can manifest suddenly, without prior warning, rendering intervention for its prevention impossible or futile. In contemporary times, most research and design calculation software offer the capability to establish preliminary values for buckling loads, even for highly intricate structures. This is typically achieved through linear eigenvalue buckling analyses, often followed by significantly more complex large displacement nonlinear analyses. However, interpreting the results for complex bridge structures can be challenging, and their accuracy is difficult to ascertain. Consequently, the objective of this paper is to introduce an original method for a more straightforward estimation of the buckling load of the upper chord in steel truss bridges. The method utilizes the theory of beams on an elastic foundation. The buckling load of the upper chord was determined using both the finite element method and the proposed methodology, yielding highly consistent results.

During an epidemic outbreak it is useful for planners and responsible authorities to be able to plan ahead to estimate when an outbreak of an epidemic is likely to ease and when the last case can be predicted in their area of responsibility. Theoretically this could be done for a point source epidemic using epidemic curve forecasting. The extensive data now coming out of China makes it possible to test if this can be done using MS Excel a standard spreadsheet program available to most offices. The available data is divided up for whole China and the different provinces. This and the high number of cases makes the analysis possible. Data for new confirmed infections for Hubei, Hubei outside Wuhan, China excluding Hubei as well as Zhejiang and Fujian provinces all follow a log-normal distribution that can be used to make a rough estimate for the date of the last new confirmed cases in respective areas. In the version 2 continuation work, 9 additional days were added for the Chinese data to evaluate the previous predictions. The extra data then available from China follows the previous predicted trend supporting the usefulness of this simple technique. In the version 2 we also tested the feasibility for a non-specialist to make similar predictions using additional data from S Korea now available. In this third continuation the predictions for Version 2 are evaluated for S Korea and fits well the beginning of the decline but it seems to be difficult to bring down numbers of cases per day under about 100 new cases per day, potential reasons for this is discussed. To further evaluate when in a prediction becomes reliable the Chinese data was used to evaluate to make predictions for each day around the peak in number of cases and after2-3 consecutive days of decreasing new cases per day the prediction becomes reliable. In version 3 data for Italy just reaching this point was used to make further predictions for that country. A second new analysis was also added to use the fitted equation to detect when the acceleration of new cases per day stopped increasing exponentially. In the Chinese case this measured point coincides with the date of the complete Hubei lockdown and in the new Italian analysis it coincides with the mandatory Italian lockdown. Predicted dates for the end of the Italian outbreak is also added. In version 4 we expand the analysis to selected European countries, USA and the World as a whole and try to predict the end of the outbreak. We further discuss the apparent success of the used techniques that might work to introduce a “new normal” not very different to the previous to stop secondary outbreaks of COVID19 and future COVIDs that are sure to come.

Undergraduate learning is a multifaceted concept that many researchers have investigated to promote student engagement, academic performance, etc. Exploring factors promoting learning among undergraduates in FYW programs, which are required for undergraduates might potentially contribute to sustainable, cross-disciplinary undergraduate education. This study used the 10-year longitudinal grade and survey data at San José State University (SJSU) and the data was collected from Academic Years (AYs) 2015 to 2020, and five student surveys constituted the sample size of 18,101 students. In 2016, SJSU changed the remedial writing course to college writing courses. Since then, students need to complete an online module course before placing themselves into a one-semester or two-semester writing course. The previous study showed that students with higher writing comfort and confidence tend to place themselves into a semester-long class. Regression analysis was applied to examine the relationships among factors promoting learning among those students. University admitted students from various diversity and backgrounds, the results of this study suggested that what students chose and persisted in were more important in advancing their academic success rather than prior learning experience or psychological factors before the class.

The research experimentally examines the viability of biodiesel obtained from pork fat (BP) as a sustainable aviation fuel (SAF) when mixed with kerosene (Ke) - Jet-A aviation fuel + 5% Aeroshell 500 oil. Various blends of biodiesel and kerosene (10, 20 and 30% vol. of BP added in Ke) were subjected to testing in an aviation micro turbo-engine under different operational states: idle, cruise, and maximum power. During the tests, monitoring of engine parameters such as burning temperature, fuel consumption, and thrust force was conducted. The study also encompassed the calculation of crucial performance indicators like burning efficiency, thermal efficiency, and specific consumption for all fuel blends under maximum power conditions. Physical-chemical properties of the blends, encompassing density, viscosity, flash point, and calorific power, were determined. Furthermore, elemental analysis and FTIR were used for chemical composition determination. The research delved into analyzing the air requirements for stoichiometric combustion and computed resulting emissions of CO2 and H2O. Experimental assessments were performed on the Jet Cat P80® micro-turbo-engine, covering aspects such as starting procedures, sudden acceleration, sudden deceleration, and emissions of pollutants (NOx, CO and SO2) during several engine operational phases. The outcomes reveal that the examined fuel blends exhibited stable engine performance across all tested conditions. This indicates that these blends hold promise as sustainable aviation fuels for micro turbo-engines, presenting benefits in terms of diminished pollution and a more ecologically sound raw material base for fuel production.

Electrical contacts are important circuit components with diverse industrial applications, and their failure can lead to multiple unwanted effects. Hence, the behavior of electrical contacts is a widely studied topic in scientific literature based on various approaches, tools, and techniques. The present study proposes a numerical modeling and simulation approach based on the Holm contact theory to study the dependence between the electric potential and the temperature within an electrical contact. Structured in 5 sections, the research was conducted using COMSOL Multiphysics software and its solid-state mechanics, electric current, and heat transfer modules in order to highlight contact behavior from mechanical, electrical and thermal points of view: the von Mises stress, contact force, the electric field amplitude, the variation of the electrical potential along the current path, the temperature gradient, and dependence of temperature along the contact elements edges were obtained by simulation and graphically represented. The results are in line with the expectations and with past research that was studied in the literature review.

Arrhythmogenic cardiomyopathy is a primary genetic disease caused by mutations of the desmosome genes. Ever since the introduction of new imaging criteria, like cardiovascular magnetic resonance, the diagnosis of arrhythmogenic cardiomyopathy is more challenging as left ventricular or biventricular variants may cause resemblance with other cardiomyopathies or myocarditis. Not only this, but they may also share an acute phase that might determine even more confusion and misdiagnosis which can influence prognosis and outcome. In this case report we present a 31-year-old patient with multiple clinical pictures: acute chest pain, new onset of heart failure and arrhythmia symptoms which determined a dynamic change in clinical diagnosis and management, ultimately taking into consideration arrhythmogenic cardiomyopathy. Through the article we try to emerge and explain common pathophysiological pathways shared by arrhythmogenic cardiomyopathy and other clinical entities with a special focus on inflammation. The final question remains: “If there is more than one heart disorder that eventually will lead to the same clinical picture, one could not but wonder if arrhythmogenic cardiomyopathy is rather a syndrome than a specific condition?”

The Hertzian contact theory, as well as most of the other classical theories of normal and tangential contact, provides displacements and the distribution of normal and tangential stress components directly in the contact surface. However, other components of the full stress tensor in the material may essentially influence the material behaviour in contact. Of particular interest are principal stresses and the equivalent von Mises stress, as well as the gradient of the hydrostatic pressure. For many engineering and biomechanical problems, it would be important to find these stress characteristics at least in the contact plane. In the present paper, we show that the complete stress state in the contact plane can be easily found for axially symmetric contacts under very general assumptions. We provide simple explicit equations for all stress components and the normal component of the gradient of hydrostatic pressure in the form of one-dimensional integrals.

The Solvency II regulatory framework specifies procedures and parameters for determining solvency capital requirements (SCRs) for insurance companies. The proposed standard SCR calculations involve two steps. The Value–at–Risk (VaR) of each risk driver is measured and, in a second step, all components are aggregated to the company’s overall SCR, using the Standard Formula. This formula has two inputs: the VaRs of the individual risk drivers and their correlations. The appropriate calibration of these input parameters has been the purpose of various Quantitative Impact Studies that have been conducted during recent years. This paper demonstrates that the parameter calibration for the equity–risk module—overall, with about 25%, the most significant risk component—is seriously flawed, giving rise to spurious and highly erratic parameter values. As a consequence, an implementation of the Standard Formula with the currently proposed calibration settings for equity–risk is likely to produce inaccurate, biased and, over time, highly erratic capital requirements.

Nonequilibrium work switching simulations and Jarzynski’s equation are a reliable method to compute free energy differences, ΔAlow→high, between two levels of theory, such as a pure molecular mechanical (MM) and a quantum mechanical/molecular mechanical (QM/MM) description of a system of interest. Despite the inherent parallelism, the computational cost of this approach can quickly get very high. This is particularly true for systems where the core region, the part of the system to be described at different levels of theory, is embedded in an environment, such as explicit solvent water. We find that even for relatively simple solute–water systems, switching lengths of at least 5 ps are necessary to compute ΔAlow→high reliably. In this study, we investigate two approaches towards an affordable protocol, with emphasis on keeping the switching length well below 5 ps. Inserting a hybrid charge intermediate state with modified partial charges which resembles the charge distribution of the desired high level makes it possible to obtain reliable calculations with 2 ps switches. Attempts using step-wise linear switching paths, on the other hand, did not lead to improvement, i.e., faster convergence for all systems. To understand these findings, we analyzed the solutes’ properties as a function of partial charges used, the number of waters in direct contact with the solute, and studied the time needed for water molecules to reorient themselves upon a change in the solute’s charge distribution.

The study within the current research is focused on theoretical assessment of sustainable aviation fuels (SAF) obtained by blending traditional jet fuels Jet A and different liquids (biodiesel and alcohols) from analytical point of view. Within this paper in-depth analysis ofthe physical-chemical properties of Jet A fuel blended with different biodiesels and alcohols has been performed. Also within the blends Aeroshell 500 oil has been added (5% vol.) for ensuring the lubrication of the turbo engine. The blends consists of: Jet Aaviation fuel + biodieselfrom: palm oil, pork fat, sunflower oil and alcohols: methanol, ethanol and butanol. All the 6 liquids have been blended with Jet A in the following percentages: 10, 20 and 30%. Flash point, kinematic viscosity, density, freezing point, elemental analysis and FTIR analysis have been performed for all the liquids: Aeroshell 500, jet A, jet A + 10, 20, 30% biodiesel from waste palm oil, pork fat and waste sunflower oil, jet A + 10, 20, 30% methanol, ethanol and butanol, biodiesels and alcohols. The obtained results shows the influence of each of the blend’s components on the physical-chemical properties of the blends. Based on the physical-chemical analysis of the blends, conclusions on the behavior of the blends during burning and the gaseous pollutants resulting from the burning process can be drawn.

In this paper, we exhibit new dynamical properties of the two-mode Caudrey-Dodd-Gibbon (TMCDG) equation. This model describes the motion of dual-waves in dispersive and nonlinear media, which mainly depends on the nonlinearity and dispersion parameters. The overlapping of such two-mode waves is affected by the phase-velocity parameter. The study takes a full advantages of the Kudryashov method and of the exponential-expansion method. For the first time, dual-wave solutions are obtained for arbitrary values of the nonlinearity and dispersive factors. The graphs of the novel solutions are also provided in order to depict the waves propagation, as well as to show the influence of the parameters.

Titanium’s accelerating usage in global markets is attributable to its distinctive combination of physical and metallurgical properties. The key to best utilizing titanium is to exploit these characteristics, especially as they complement one another in a given application, rather than to just directly substitute titanium for another metal. Titanium alloy are extensively used in aerospace applications such as components in aero-engines and space shuttles, mainly due to their superior strength to weight ratio. For these demanding applications functionality and reliability of components are of great importance. To increase flight safety, higher sensitivity inspections are sought for rotating parts. Increased sensitivity can be applied at the billet stage, the forging stage, or both. Inspection of the forging geometry affords the opportunity to apply the highest sensitivity due to the shorter material paths when compared to those required for billet inspections. Forging inspection is typically performed for titanium (Ti) rotating parts with immersion inspection and fixed-focus, single-element transducers. Increased gain is required with depth because the ultrasonic beam attenuates with distance and diverges beyond the focus position that is placed near the surface. The higher gain that is applied with depth has the effect of increasing the UT noise with depth. The relationships between the UT noise, selection of the examination technique and the smallest detectable defect are presented in this material.

In the context of the COVID-19 pandemic, countries around the world varied in the strength and timeliness of their responses. In Romania, specific challenges were faced with regards to managing the spread and limiting the impact of the disease, ranging from healthcare infrastructure to demographic and sociocultural aspects. As the country has a sizeable diaspora, major difficulties were faced when large numbers of individuals from highly affected areas returned to Romania. However, the fast implementation of control measures successfully averted a surge in the number of COVID-19 cases. This delayed the overburdening of an already challenged healthcare system during the initial phases of the epidemic. Furthermore, early control was facilitated by the exploitation of communication channels that penetrated all layers of society, from ordinary citizens to governmental authorities and high-ranking religious figures. The management of the COVID-19 crisis in Romania illustrates the importance of a fast initial response which takes into account the role played by sociocultural aspects in the context of an epidemic. As the challenges faced by Romania are not unique, these results could inform future public health strategies worldwide.

The results of the investigation showed that second-order kinetics govern the adsorption process, and the corresponding rate constants were found. To evaluate the parameters related to the adsorption process, the adsorption equilibrium was examined using a variety of mathematical models, such as the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherm models. The Langmuir isotherm was found to be the best appropriate among all models for describing the adsorption of Cu2+ and Ni2+ ions using bio-nanocomposite beads. The positive values of ΔH° indicate that the adsorption is physical and endothermic, in agreement with experimental results. The negative value of ∆G° shows that the adsorption process is spontaneous. Positive ΔS° values indicate increased randomness at the solid/liquid interface, during adsorption of Cu2+ and Ni2+ cations onto the engineered bio-nanocomposite. The maximum adsorbed amounts of metal ions by the bio-nanocomposite used were 370.37 mg/g for Ni2+ and 454.54 mg/g for Cu2+ from single system. For the binary system, according to the Langmuir isotherm, the maximum adsorbed amounts of Ni2+ and Cu2+ were 357.14 mg/g and 370,37 mg/g, respectively. There is proof that Alginate-Moroccan clay bio-nanocomposites can serve as a different, less expensive source of sorbents for the removal of metal ions from single and binary systems.

Parental stresses are normal responses to raising children. They are affected by stresses parents and children accumulate and bring to their interrelations. Background factors like economic difficulties or the relations between the parents may affect parental stresses as well as demographic and environmental factors like noise and access to urban parks. Most studies on parental stress are based on a verified psychological questionnaire. We suggest using frequency domain heart rate variability index (HRV) to measure parental stress enabling, by thus, the measurement of physiological aspects of stress and risk to health. Parental stress is measured as the difference between HRV accumulated at home while staying with the children and without the husband and HRV measured in the neighborhood while staying without the children and the husband. We use the index to compare differences among Muslim and Jewish mothers in exposure to maternal stress at their homes and to expose the factors that predict differences in maternal stress. We found that Muslim mothers suffer from home-related maternal stress while Jewish mother do not. Number of children and ethnically related environmental aspects predict differences in maternal stress between Muslim and Jewish mothers. Muslims' lower access to parks stems from lack of home garden and parks in their neighborhoods in the Arab towns but mainly by restrictions on Muslim women's' freedom of movement to parks. Despite differences in levels of noise at home and in the status of the mother in the household, these factors did not predict differences in parental stress. Instead, the study highlights the crucial role of greenery and freedom of movement to parks in moderating home-related maternal stress.

Electrical microgrids are deemed to be the future of modern power systems. Microgrids are sophisticated, decentralized, and self-sufficient small-scale power systems consisting of various resources ranging from wind turbines, solar photovoltaics, electric vehicles, smart energy storage, and complex communication infrastructure. However, renewable energy sources such as solar photovoltaics and wind-based generators are highly intermittent, and if not appropriately planned, they can compromise the stability of the grid. Formal methods can define and analyze the functionality and behavior of any system and show if the system design is correct before the actual system is implemented. Although formal methods have been around for many years, it is surprising that little to none are utilized in the design of safety-critical electrical power systems. Currently, in modeling microgrids, few to no attempts of formalization are being used to improve the design reliability and reduce system operating costs and time. This work demonstrates how complex systems such as microgrids can be modeled elegantly using a formal specification method. In this work, the Z state-based formal specification language (Z-Method) is used to model and verify microgrid designs. In this work, 3-interconnected microgrid systems with a high penetration level of solar and wind-based renewable energy sources with plugin hybrid electric vehicles (PHEV) as battery energy storage systems (BESS) are modeled using the Z-method. To the best of authors, the knowledge presented formal method is one of the first reported attempts in modeling microgrid communities using Software Engineering formalism.

Background: The Liver Imaging Reporting and Data System (LI-RADS) combines standardized terminology with a classification system for imaging findings in patients with HCC, therefore rendering diagnostic biopsy unnecessary in many cases. This retrospective study included 23 patients with a biopsy diagnosis of HCC, performed either before or after local interventional procedures, in order to evaluate the histopathologic changes induced by previous procedures and their potential influence on the response to immune therapy. Material and Methods: The study encompassed a cohort of patients diagnosed with Hepatocellular Carcinoma (HCC). Diagnosis was established through contrast-enhanced computer tomography or magnetic resonance imaging that identified LI-RADS-5 nodules in conjunction with historical liver disease and elevated alpha-fetoprotein (AFP) levels, or through histological examination confirming positivity for glypican3, heat shock protein70, and glutamine synthetase. The study detailed the liver disease etiology, LI-RADS scores, characteristics and dimensions of HCC nodules, serum AFP concentrations, Edmondson-Steiner grading, and the expression of programmed cell death ligand 1 (PD-L1) in the tumor cells. Results: Among the study's cohort of Hepatocellular Carcinoma (HCC) patients, a portion had not received any prior treatments, while the remainder experienced local HCC recurrence following trans-arterial chemoembolization or radiofrequency ablation. Observations indicated elevated alpha-fetoprotein (AFP) levels in those who had not undergone any previous interventions, showing statistical significance. The Edmondson-Steiner classification predominantly identified grade III differentiation across patients, irrespective of their treatment history. Furthermore, an increase in intra-tumoral programmed cell death ligand 1 (PD-L1) expression was noted in patients who had not been subjected to previous therapies. Conclusion: Liver biopsy offers valuable insights for patients with Hepatocellular Carcinoma (HCC), assisting in the tailoring of immune therapy strategies, particularly in cases of recurrence following prior local interventions.

The nature of the blue color in the iodine-starch reaction (or, in most cases, iodine-iodide-starch reaction, i.e. as I2 as well as I- are typically present) has for decades elicited debate. The intensity of the color suggests a clear charge-transfer nature of the band at ~600 nm, and there is consensus regarding the fact that the hydrophobic interior of the amylose helix is the location where iodine binds. Three types of possible sources of charge transfer have been proposed: (1) chains of neutral I2 molecules, (2) chains of poly-iodine anions (complicated by the complex speciation of the I2 - I- mixture), or (3) mixtures of I2 molecules and iodide or polyiodide anions. An extended literature review of the topic is provided here. According to the most recent data, the best candidate for the “blue complex” is a I2-I5-I2 unit – expected to occur in repetitive manner inside the amylose helix.

We give a simple proof of the Chen inequality for the Chen invariant $\underbrace{\delta (2,...,2)}_{k\mbox{ terms}}$ of submanifolds in Riemannian space forms.

This paper proposes a solution for the development of microclimate monitoring for Low Voltage / High Voltage switchgear using the PRTG Internet of Things (IoT) platform. This IoT-based real time monitoring system can enable predictive maintenance to reduce the risk of electrical station malfunctions due to unfavorable environmental conditions. The combination of humidity and dust can lead to unplanned electrical discharges along the isolators inside a low or medium voltage electric table. If no predictive measures are taken, the situation may deteriorate and lead to significant damage inside and outside the switchgear cell. Thus, the mentioned situation can lead to unprogrammed maintenance interventions that can conduct to the change of the entire affected switchgear cell. Using a low-cost and efficient system, the climate conditions inside and outside the switchgear is monitored and transmitted remotely to a monitoring center. From the results obtained using a 365-day time interval, we can conclude that the proposed system is integrated successfully in the switchgear maintaining process, having as result the reducing of maintenance costs.

The pathophysiology of irritable bowel syndrome in children involves multiple factors. Thus, treatment options are variable, targeting diet and the child’s and parents’ behav-ior, involving pharmacological and psychological interventions or neuromodulation. Parents are increasingly interested in complementary and alternative therapies for children with irritable bowel syndrome, especially when other treatments have been tried without relieving the child’s symptoms. This paper looks into current evidence for the benefits and side effects of herbal remedies and spices in pediatric patients with IBS. The benefits of peppermint oil, STW5, Psyllium fiber, Curcuma, ginger, and other herbal medicines are discussed based on findings in the current literature.

Hybrid electric vehicles (HEVs) are perceived as a first step towards the future of sustainable transport. Of course, battery electric vehicles (EVs) are currently ideal for what is wanted to stand for transport in the future. The lack of infrastructure for these vehicles makes many potential users choose hybrid vehicles in these conditions. This paper analyzes the influence of the engine and electric motor of hybrid vehicles on their performances. Three engines with slightly different power and close characteristics were considered for configured models. Also, two electric motors with very different power but having a very close maximum continuous torque have been used in models. One is an induction motor, and the other is a permanent magnet synchronous motor. ADVISOR software has been used for vehicles configuration and simulation. Series and parallel hybrid vehicles have been considered. The main dynamic performances and the fuel consumption in two driving cycles were compared for the configured models. Three conventional models with the same engines used in HEVs have also been simulated for reference. The results highlight that in the case of HEVs, the choice of combination engine/electric motor is crucial in obtaining the best report between dynamic performances and low fuel consumption, and implicitly a low negative impact on the environment.

The UV/Vis absorption energies (νmax) of different solvatochromic probes measured in co-solvent/water mixtures are analysed as a function of the average molar concentration (Nav) of the solvent composition. Nav is discussed in terms of the underlying average molar mass (mol average or mass average) of the mixture. ET(30) of Reichardt`s dye B30 is the focus of the analysis. Methanol, ethanol, 1,2-ethanediol, 2-propanol, 2-methyl-2-propanol, 2-butoxyethanol, formamide, N-methylformamide (NMF), dimethylformamide (DMF), N-formylmorpholine (NFM), 1,4-dioxane and DMSO were used as co-solvents. Significant linear dependencies of ET(30) as a function of Nav can be demonstrated for formamide/water, 1,2-ethanediol/water, NMF/water and DMSO/water mixtures over the whole composition range. These mixtures belong to the group of solvents that do not enhance the water structure according to the Marcus classification. The specifics of the 1,4-dioxane/water mixtures are discussed. For alcohol/water mixtures with enhanced water structure, the influence of the solvent microstructure on ET(30) is particularly evident.

Human African Trypanosomiasis (HAT) commonly known as sleeping sickness, is a neglected tropical vector borne disease caused by trypanosome protozoa. It is transmitted by bites of infected tsetse fly. In this paper we first present the vector-host model which describes the general transmission dynamics of HAT. In the tsetse fly population, the HAT is modelled by three compartments while in the human population, the HAT is modelled by four compartments. The next generation matrix approach is used to derive the basic reproduction number, R₀, and also it is proved that if R₀ ≤ 1 the disease free equilibrium is globally asymptotically stable, which means the disease dies out. The disease persist in the population if the value of R₀ > 1. Furthermore, the optimal control model is determined by using the Pontryagin’s maximum principle with control measures such as education, treatment and insecticides used to optimize the objective function. The model simulations confirm that the use of the three control measures are very efficient and effective to eliminate HAT in Africa.

Ovarian tissue cryopreservation (OTC) or testicular tissue cryopreservation (TTC) are effective and often the only options for fertility preservation in female or male patients due to oncological, medical, or social aspects. While TTC and resumption of spermatogenesis, either in vivo or in vitro, has still be considered an experimental approach in humans, OTC and autotransplantation has been applied increasingly to preserve fertility with more than 200 live births worldwide. However, the cryopreservation of reproductive cells followed by the resumption of gametogenesis, either in vivo or in vitro, may interfere with sensitive and highly regulated cellular processes. In particular, the epigenetic profile, which includes not just reversible modifications of the DNA itself but also post-translational histone modifications, small non-coding RNAs, gene expression and availability, and storage of related proteins or transcripts, have to be considered in this context. Due to complex reprogramming and maintenance mechanisms of the epigenome in germ cells, growing embryos, and offspring, OTC and TTC are carried out at very critical moments early in the life cycle. Given this background, the safety of OTC and TTC taking into account the epigenetic profile has to be clarified. Cryopreservation of mature germ cells (including Metaphase II oocytes and mature spermatozoa collected via ejaculation or more invasively after testicular biopsy) or embryos has been used successfully for many years in Medically Assisted Reproduction (MAR). However, tissue freezing followed by in vitro or in vivo gametogenesis has become more attractive in the past, while few human studies have analysed the epigenetic effects, with most data deriving from animal studies. In this review, we highlight the potential influence of the cryopreservation of immature germ cells and subsequent in vivo or in vitro growth and differentiation on the epigenetic profile in humans and animals.

Our natural language approach concerns syntactic analysis using a dedicated Javascript library - wink-nlp - and semantic analysis based on Prolog programming language, facilitated by another Javascript library - tau-prolog - that allows defining logical programs, declaring rules and checking for goals inside Javascript language. Firstly, our program splits the original text into sentences, than into tokens and identifies each part of the sentence, dynamically maps entities into Prolog rules, then check the spelling accordingly to the Definite Clause Grammar (DCG) by querying the pre-defined program for initial goals (the sentence itself). Basically, we let the parser infer its own rules from the syntactic point of view, then check the grammar from a semantic perspective against the DCG inside the same work flow or pipeline of steps.The provided article combine the usage of wink-nlp and tau-prolog packages for natural language processing (NLP) and understanding (NLU).

The production of fuels and other industrial products from renewable sources has intensified the search for new substrates or for the expansion of the use of substrates already in use, as well as the search for microorganisms with different metabolic capacities. In the present work, we isolated and tested a yeast from the soil of sugarcane irrigated with vinasse, that is, with high mineral content and acidic pH. The strain of Meyerozyma caribbica URM 8365 was able to ferment glucose, but the use of xylose occurred when some oxygenation was provided. However, some fermentation of xylose to ethanol in oxygen limitation also occurs if glucose is present. This strain was able to produce ethanol from molasses substrate with 76% efficiency, showing its tolerance to possible inhibitors. High ethanol production efficiencies were also observed in acidic hydrolysates of each bagasse, sorghum, and cactus pear biomass. Mixtures of these substrates were tested and the best composition was found for the use of excess plant biomass in supplementation of primary substrates. It was also possible to verify the production of xylitol from xylose when the acetic acid concentration is reduced. Finally, the proposed metabolic model allowed calculating how much of the xylose carbon can be directed to the production of ethanol and/or xylitol in the presence of glucose. With this, it is possible to design an industrial plant that combines the production of ethanol and/or xylitol using combinations of primary substrates with hydrolysates of their biomass.

In recent years there has been increasing interest in the discovery of new natural herbal remedies for the treatment of common conditions such as diabetes and inflammatory diseases. In this context, this paper analyzed the antidiabetic and anti-inflammatory potential of two plants of the genus Artemisia: Artemisia absinthium (wormwood) and Artemisia vulgaris (mugwort) and Trigonella foenum-graecum (fenugreek) plants less studied from this point of view. Thus, hydroal-coholic extracts (50% EtOH v/v, 10% mass) were made, which were processed by membrane technologies, micro- and ultrafiltration, in order to concentrate the biologically active principles. The extracts were then analyzed in terms of content in active principles of interest (polyphenols, flavones). The antidiabetic activity of the extracts was analyzed by testing their ability to inhibit α-amylase and α-glucosidase and the anti-inflammatory activity by testing the ability to inhibit hyaluronidase (HYA) and lipoxygenase (LOX). Thus, the T. foenum-graecum extracts showed a high inhibitory activity on α-amylase 3.22 ± 0.3 g / mL (compared to the standard used - IC50 acarbose = 3.5 g / mL) and a high inhibitory activity on LOX: 19.69 ± 0.52 g/mL (compared to all standards used). The concentrated extract of Artemisia vulgaris showed increased activity of inhibition of α-amylase - IC50 = 8.57 ± 2.31g/mL and moderate activity of inhibition of HYA - IC50 = 17.18 g/mL compared to ibuprofen, the standard used - IC50 = 5.73 g/mL. The concentrated extract of Artemisia absinthium showed a pronounced activity of inhibition of LOX - IC50 = 19.71 g / mL, compared to the standard - rutin - IC50 = 22.34 g/mL).

The description of stellar interiors remains as a big challenge for the nuclear astrophysics community. The consolidated knowledge is restricted to density regions around the saturation of hadronic matter $\rho _{0} = 2.8\times 10^{14} {\rm\ g\ cm^{-3}}$, regimes where our nuclear models are successfully applied. As one moves towards higher densities and extreme conditions up to five to twenty times $\rho_{0}$, little can be said about the microphysics of such obejects. Here, we employ an MCMC strategy in order to access the variability of polytropic three-pircewised models for neutron star equation of states. With a fixed description of the hadronic matter we explore a variety of models for the high density regimes leading to stellar masses up to 2.5 $M_{\odot}$. In addition, we also discuss the use of a Bayesian power regression model with heteroscedastic error. The set of EoS from LIGO was used as inputs and treated as data set for testing case.

SerIoT is a Research and Innovation Project funded by the European Commission to demonstrate secure networks for the Internet of Things (IoT). This paper presents an overview of the design for smart and secure network infrastructures for the IoT, based on Software Defined Networks (SDN), named the SerCPN system, whose main component is a smart SDN-Controller with online cognitive security surveillance and reporting, which establishes and dynamically modifies paths that enhance security for IoT devices and end users, and offers a high quality of service (QoS) with required security constraints. This online cognitive surveillance and path management is based on the Cognitive Packet Network (CPN) principle and uses Random Neural Networks (RNN) for decision making.

Using geometric considerations, we provide a clear derivation of the integral representation for the error function, known as the Craig formula. We calculate the corresponding power series expansion and prove the convergence. The same geometric means finally help to systematically derive handy formulas that approximate the inverse error function. Our approach can be used for applications in e.g. high-speed Monte Carlo simulations where this function is used extensively.

Autistic spectrum disease (ASD) is an increasingly common diagnosis nowadays with a prevalence of 1-2% in most countries. Its complex causality – a combination of genetic, immune, metabolic and environmental factors - is translated into pleiomorphic developmental disorders of various severity, which have in common two main aspects: repetitive, restrictive behaviors, and difficulties in social interaction varying from awkward habits and verbalization to complete lack of interest from the ASD child for the outside world. The wide variety of ASD causes also makes it very difficult to find a common denominator – a disease biomarker and medication – and currently there is no commonly used diagnostic and therapeutic strategy besides clinical evaluation and psychotherapy.It is known that inflammation is present in a majority of ASD children, and blood inflammatory markers, together with metabolic, electrophysiological markers and imagistics are useful for ASD diagnostic validation and treatment; however, they tend to leave out a sizeable proportion of ASD kids who do not have such modifications. Genetic testing – whole exome sequencing or targeted profiling on about 500 ASD-linked genes- may also provide good insight into pathophysiology, however many times its results are more restrictive rather than offering additional therapeutic options.Here we describe a new biomarker for ASD - the neuron-specific enolase (NSE) - which was elevated above the normal clinical range (less than 16.3 ng/mL) in the vast majority of ASD kids tested in our study (40 of 41, or 97.5%). This finding opens up a new direction for diagnostic confirmation, dynamic evaluation and therapeutic intervention for ASD kids.

Many engineered approaches have been proposed over the years for solving the hard problem of performing indoor localisation using smartphone sensors. However, specialising these solutions for difficult edge cases remains challenging. Here we propose an end-to-end hybrid multimodal deep neural network localisation system, MM-Loc, relying on zero hand-engineered features, learning them automatically from data instead. This is achieved by using modality-specific neural networks to extract preliminary features from each sensing modality, which are then combined by cross-modality neural structures. We show that our choice of modality-specific neural architectures is capable of estimating the location with good accuracy independently. But for better accuracy, a multimodal neural network fusing the features of early modality-specific representations is a better proposition. Our proposed MM-Loc solution is tested on cross-modality samples characterised by different sampling rates and data representation (inertial sensors, magnetic and WiFi signals), outperforming traditional approaches for location estimation. MM-Loc elegantly trains directly from data unlike conventional indoor positioning systems, which rely on human intuition.

This paper is a continuation of previous papers on unification theories publishes in AXIOMS. We present results about the (modified) Yang-Baxter equation, Euler’s formula, dual numbers, coalgebra structures, non-associative structures, differential geometry, and (mean) inequalities. We will also attempt to relate our discussion to some Brain Studies and Machine Learnig.

We prove a quasi-pseudometric version of the strong Ekeland principle proved by P. Georgiev and T. Suzuki.

Precise and fast position tracking is essential for the correct operation of many industrial robots and CNC machine tools. This subject is also important in the control of the mount of the astronomical telescope, especially for the tracking of artificial satellites. As system parameters can change, a control method that is robust to changes in parameters must be used. Such a method is the sliding control, which, however, ensures the robustness only after reaching the sliding surface. Therefore, a new method was proposed in the paper, which eliminates the phase of reaching the sliding surface. The method consists of using a reference trajectory generator and determining the generalized error in relation to this trajectory. The procedure for designing the control system is presented. Next, the proposed method was verified on the laboratory stand. The described control method provides a robust system operation and can be easily implemented in the control system.

The conceptual reconstruction of Neiwan powerhouse is one of the key activities under the current ongoing mapping project of Taiwanese hydropower plants that mainly took place between 2013 and 2015 and is now focused on micro, pico, and historical power plants. Judging from the fact that the oldest hydropower plant in Taiwan named Guishan starts its operation in 1905, Neiwan powerhouse was among the very first powerhouses that were built across the island to support the electrification of Taiwan. However, the main function of the single turbine equipped Neiwan micro powerhouse was to support mainly the military needs and protect the territories occupied by Japanese troops. Since the powerhouse was built in 1909 and operates only something about 10 year there are very little physical materials or evidence along with contemporaries. Therefore the further reconstruction is based mainly on physical observation of the remains located at the site, old photographs, related articles, treatises and typology of mechanical and civil constructions of other hydropower plant cases in Taiwan hence this paper´s main intention is to pitch a concept reconstruction rather than definite conclusion.

The ability to identify and rank risk is essential for efficient and effective supervision of financial service firms, such as banks and insurers. Risk ranking ensures limited resources are allocated where they are most needed. Today, automatic risk identification within insurance supervision primarily relies on quantitative metrics based on numerical data (e.g. returns). The purpose of this work is to assess whether Natural Language Processing (NLP) and cognitive networks can achieve similar automated risk ranking and identification by analysing textual data, i.e. NIDT=829 investor transcripts from Bloomberg. To this aim, this work explores and tunes 3 NLP techniques: (1) keyword extraction enhanced by cognitive network analysis; (2) valence/sentiment analysis; and (3) topic modelling. Results highlight that keyword analysis, enriched by term frequency-inverse document frequency scores and semantic framing through cognitive networks, could detect events of relevance for the insurance system like cyber-attacks or the COVID-19 pandemic. Cognitive networks were found to highlight events that related to specific financial transitions: The semantic frame of "climate" grew in size by +538% between 2018 and 2020 and outlined an increased awareness that agents and insurers expressed towards climate change. A lexicon-based sentiment analysis achieved a Pearson’s correlation of ρ=0.16 (p<0.001,N=829) between sentiment levels and daily share prices. Although relatively weak, this finding indicates that insurance jargon is insightful to support risk supervision. Topic modelling is considered less amenable to support supervision, because of a lack of results’ stability and an intrinsic difficulty to interpret risk patterns. We discuss how these automatic methods could complement existing supervisory tools in automated risk ranking.

Elastic properties of materials and their changes with temperature are important for their applications in engineering. A study on the influence of phase composition of AISI 4130 alloy on Young's modulus (Ed), shear modulus (Gd), and damping (Q-1) was carried out by Impulse Excitation Technique (IET). The material characterization was carried out using confocal microscopy, XRD, MET, HV, and dilatometry. A stable structure, composed of ferrite (BCC) and pearlite (α-Fe+Fe3C), was obtained by annealing. Metastable structure of martensite (BCT) was obtained by quenching. The Ed, Gd, and Q-1 were measured, varying the temperature from RT to 900 °C. The values of Ed and Gd, at RT, were determined as 201.5 and 79.2 GPa (annealed), and 190.13 and 76.5 GPa (quenched), respectively. In the annealed steel, the values Ed and Gd decrease linearly on heating up to 650 °C, with the thermal expansion. In the quenched steel, weak changes in the dilatometric curve, Ed, Gd, and Q-1, in the range of 350-450 °C, indicated decompositions of the martensitic phase. Sharp decrease in the moduli and high peak of Q-1, was observed for both samples around 650-900 °C, revealing low lattice elastic stability of the phases during transformations α(BCC)+Fe3C↔γ(FCC).

FinTech has been in the focus of the discussion for quite some time. However, the market share of FinTech companies is still relatively small in compared to more traditional financial services. The purpose of this paper is to analyse the status quo, current developments and challenges ahead for the Latvian FinTech sector. We combine three analyses: the political and legal, the economic, the social and the technological environment (PEST) analysis, an analysis of the size and performance of FinTech companies during the last 10 years, and a survey among FinTech companies. We find that the current status of regulation is one of the main obstacles to FinTech development, because it does not sufficiently consider FinTech-specific aspects. Problems in attracting skilled workforce, and an environment that is not very supportive of new developments in finance are further challenges and might explain at least part of the growth and performance difficulties. A revision, modernization and harmonization of regulation is essential to create a level playing field for all market participants: FinTech companies, traditional financial service providers and those originally traditional players that are integrating FinTech solutions in their business model. Further efforts are also required to foster the Latvia’s attractiveness for skilled workforce. We hope that this study helps increase the visibility of Latvian FinTech and contributes to the development of the new Latvian FinTech strategy.

The assortment of low-cost 3D printers for “in-practice” use, e.g., for clear aligner therapies, is ever increasing. To address concerns about the accuracy of orthodontic models produced on such printers when cost efficient modes of 3D printing are employed, this study examined the effect of print model body type and print angulation on accuracy. Six printing-configuration groups were included: 2 model types (solid or hollow shell) combined with 3 print angles (0°, 70°, or 90°) with 10 models/group; all models were printed with 100-µm layer thickness using a digital light processing-based 3-dimensional printer. Eleven selected structures and distances were measured on the printed models with a digital microscope and compared to the same measures on a digitized master model. The clinically-acceptability range was set at ±0.25 mm difference from the master model for single tooth measurements (intra-tooth) and ±0.5 mm for cross-arch measurements (inter-tooth). For individual measurements across all models, 98% fell within clinical acceptability. For mean measurements within each model group, only canine height for the shell-0° model had a mean difference (0.26 mm ± 0.03) outside the clinically acceptable range for intra-tooth measurements. Standard deviations for all intra-tooth measurements were within 0.07 mm. While none of the mean inter-tooth measurements exceeded the acceptability range, the standard deviations were larger (0.04 to 0.30 mm). Accuracy of orthodontic models for clear aligner therapies was not impacted beyond the clinically acceptable range when altering model body type and print angulation to improve efficiency of 3D printing. These findings suggest greater flexibility of the practitioner to alter print settings to address time and cost efficiency in various clinical scenarios and still maintain clinically acceptable model accuracy.

Road segment can be estimated from GPS trajectories by averaging. However, most existing averaging strategies suffer from high complexity or poor accuracy. For example, finding the optimal mean for a set of sequences is known to be NP-hard, while using Medoid compromises the quality. In this paper, we introduce three extremely fast and practical methods for solving the problem. The methods first analyze three descriptors and then use either a simple linear model or a more complex curvy model depending on an angle criterion. The results outperform Medoid and provide equal or better accuracy than the best existing methods while being very fast, and therefore suitable for real-time processing.

Although the dopamine hypothesis of schizophrenia explains the effects of all the available antipsychotics in clinical use, there is an increasing need for developing new drugs for the treatment of positive, negative, and cognitive symptoms of chronic psychoses. Xanomeline-trospium (KarXT) is a drug combination that is based on the essential role played by acetylcholine in the regulation of cognitive processes and the interactions between this neurotransmitter and other signaling pathways in the central nervous system, with a potential role in the onset of schizophrenia, Alzheimer’s disease, and substance use disorders. A systematic literature review that included four electronic databases (PubMed, Cochrane, Clarivate/Web of Science, and Google Scholar) and the US National Library of Medicine database for clinical trials detected 21 sources referring to 14 studies focused on KarXT, out of which only four have published results. Based on the results of these trials, the short-term efficacy and tolerability of xanomeline-trospium are good, but more data is needed before this drug combination may be recommended for clinical use. However, on a theoretical level, the exploration of KarXT is useful for increasing the interest of researchers in finding new, non-dopaminergic, antipsychotics that could be used either as monotherapy or as add-on drugs.

Although Eulerian approaches are standard in computational acoustics, they are less effective for certain classes of problems like bubble acoustics and combustion noise. A different approach for solving acoustic problems is to compute with individual particles following particle motion. In this paper, a Lagrangian approach to model sound propagation in moving fluid is presented and implemented numerically, using three meshfree methods to solve the Lagrangian acoustic perturbation equations (LAPE) in the time domain. The LAPE split the fluid dynamic equations into a set of hydrodynamic equations for the motion of fluid particles and perturbation equations for the acoustic quantities corresponding to each fluid particle. Then, three meshfree methods, the smoothed particle hydrodynamics (SPH) method, the corrective smoothed particle (CSP) method, and the generalized finite difference (GFD) method, are introduced to solve the LAPE and the linearized LAPE (LLAPE). The SPH and CSP methods are widely used meshfree methods, while the GFD method based on the Taylor series expansion can be easily extended to higher orders. Applications to modeling sound propagation in steady or unsteady fluids in motion are outlined, treating a number of different cases in one and two space dimensions. A comparison of the LAPE and the LLAPE using the three meshfree methods is also presented. The Lagrangian approach shows good agreement with exact solutions. The comparison indicates that the CSP and GFD method exhibit convergence in cases with different background flow. The GFD method is more accurate, while the CSP method can handle higher Courant numbers.

Provenance trials provide a valuable opportunity to evaluate the impact of extreme events on growth and wood properties. In this study, we have evaluated 81 Norway spruce provenances, tested in three provenance trials established in the Romanian Carpathians in 1972. The response to drought of the Norway spruce provenances – resistance, recovery, resilience, and relative resilience, has been examined, as well as the relationship between climate and growth, and the correlations between wood traits, the coordinates of origin and drought resilience indices. In each provenance trial, there were significant differences between provenances and years regarding wood widths and latewood percentage (LWP). Regarding the drought extreme events, the years when it occurred in all three provenance trials were 2000 and 2003. Significant differences between provenances for at least one drought resilience index have been found in all provenance trials, for the year 2000. By using subperiods of 25 years, changes in the relationship between climate and growth have been observed. Several provenances with high radial growth and good resistance and/or recovery have been identified. Provenances that performed better in common garden experiments could be used in assisted migration even beyond the current natural range.

Fighting corruption and enhancing tax compliance through digital public services represent key factors for increasing sustainable development in Romania. We argue that fighting corruption may increase the level of sustainable development, through digital pubic services. Using digital public services leads to the increase of the level of tax compliance, because entrepreneurs will feel more confident and responsible and they will decide to better comply. Tax regulations can affect the level of tax compliance through the additional costs they generate. The discussion is based on the consideration of the costs generated by compliant behavior and we explain how such costs influence the entrepreneurs’ decision in the fiscal environment. If the costs are higher, entrepreneurs will take evasive initiatives and will refuse to comply. Among the numerous tools developed to fight corruption, the use of communication technologies has recently been researched and there is still need for further research in the Romanian economic environment. The use of digital public services reduces costs for entrepreneurs and increases their confidence in state institutions due to higher levels of transparency. We argue for increasing sustainable development in Romania through digital public services, thus fighting corruption and enhancing tax compliance.

The dynamic interplay of signaling networks in most major cellular processes is characterized by the orchestration of reversible protein phosphorylation. Consequently, analytic methods like quantitative phospho-peptidomics has been pushed forward from a highly specialized edge-technique to a powerful and versatile platform for comprehensively analyzing the phosphorylation profile of living organisms. Despite enormous progress in instrumentation and bioinformatics, a major problem remains a high number of missing values caused by the experimental procedure due to either a random phospho-peptide enrichment selectivity or borderline signal intensities, which both cause the exclusion for fragmentation using the commonly applied data dependent acquisition (DDA) mode. Consequently, an incomplete dataset reduces confidence in the subsequent statistical bioinformatic processing. Here, we successfully applied data independent acquisition (DIA) by using the filamentous fungus Magnaporthe oryzae as model organism and could prove that while maintaining data quality (such as phosphosite and peptide sequence confidence), the data completeness increases dramatically. Since the method presented here reduces the LC-MS/MS analysis from 3 h to 1 h and increases the number of phoshosites identified up to 10-fold in contrast to published studies in fungi, we pushed the phospho-proteomic technique beyond its current limits and could provide a sophisticated resource for investigation of signaling processes in filamentous fungi.

Cardiac myosin-binding protein C (MyBPC) is a thick-filament associated regulatory protein in the sarcomere. It regulates the sensitive contractile system of the myocardium by acting as a mechanical tether, sensitizing the thin filament or modulating myosin motor activity. Mutations in the MYBPC3 gene are a frequent cause for the development of hypertrophic cardiomyopathy, the most frequent cardiac disorder. Recently, the monoallelic double mutation MYBPC3Δ25bp/D389V has been discovered as a subset of the common MYBPC3Δ25bp variant in South Asia. MYBPC3Δ25bp/D389V carriers exhibit hyperdynamic features, which are considered an early finding for the development of hypertrophic cardiomyopathy. Using correlation-guided molecular dynamics simulations sampling, we show that the D389V mutation shifts the conformational distribution of the C2 domain of MyBPC. We further applied biochemical approaches to probe the effects of the D389V mutation on structure, thermostability and protein-protein interactions of MyBPC C2. The melting temperature (Tm) of MyBPC C2 D389V is decreased by 4 to 7 °C compared to wild type while the interaction of the C0-C2 domains with myosin and actin remains unchanged. Additionally, we utilized steered molecular dynamics (SMD) simulations to investigate the altered unfolding pathway of MyBPC C2 D389V. Based on our data, we propose a pathomechanism for the development of HCM in MYBPC3Δ25bp and MYBPC3Δ25bp/D389V carriers.

A mathematical model given by a two - dimensional differential system is introduced in order to understand the transition process from the normal hematopoiesis to the chronic and accelerated acute stages in chronic myeloid leukemia. A previous model of Dingli and Michor is refined by introducing a new parameter in order to differentiate the bone marrow microenvironment sensitivities of normal and mutant stem cells. In the light of the new parameter, the system now has three distinct equilibria corresponding to the normal hematopoietic state, to the chronic state, and to the accelerated acute phase of the disease. A characterization of the three hematopoietic states is obtained based on the stability analysis. Numerical simulations are included to illustrate the theoretical results.

The term immersive technology refers to various types of technologies and perspectives that are constantly changing and developing. It can be used for different purposes and domains such as: education, healthcare, entertainment, arts, and engineering. This research paper aims to examine which training method is more effective between the traditional approach, using PowerPoint and the immersive technology approach, through mixed reality using a HoloLens 2 device. The experiment involves comparing two groups of students who received different training methods: the first group saw a PowerPoint slide with an image of the human muscular system, while the second group saw a 3D hologram of the human body that showed the same muscle groups as in PowerPoint. The researchers wanted to test whether mixed reality devices could enhance students' cognitive functions and to investigate if the IQ of the participants had any influence in the effectiveness of the teaching method. The main finding of this study is that the instructions given with mixed reality technology, via the Microsoft HoloLens 2 device, are more appropriate for participants who have an IQ score below 100 points. For the other participants, with an IQ score above 100 points, the PowerPoint support was more suitable.

Bisphenol-A (BPA) represents an important co-monomer for obtaining polycarbonate, epoxy resins, flame retardants, in paint, and other chemicals products. Products containing BPA are widely used, and thus, we can find it in the environment: in the air, in the soil, in natural surface water and in sediments, underground water in landfills, and in wastewater. BPA disturbs human and animals’ health. This influences the enzymatic, androgenic, neurological, liver and reproductive systems at different stages of human life: like in fetal stage, children and adults’ stages. Taking these inconveniences into account, it is very important to remove BPA from water. Ultrasonic technology can be considered a verry sustainable and efficient method to remove BPA from water. The advantages of this method is easy to implement on existing water treatment and purification facilities, it does not produce residual compounds that produce sludge, the time required for degradation is of the order of 1-2 hours and the level of degradation is very high. In this work, we presented the studies on the efficiency of ultrasonics under air atmosphere on the degradation of BPA. The influence of the frequency and of some additional compounds such as carbon tetrachloride, FeSO4 7H2O (FS), and ethyl anthraquinone (EAC) was studied. Three different frequencies were used: 1146 KHz, 864 KHz, 580 KHz, at a power of 50 W. It was identified the efficiency of BPA degradation over a period of 60 minutes, with sampling every 15 minutes. Using the LC-MS/MS technique, the degradation compounds were identified that result from the application of ultrasound processes. Pathways of BPA degradation were also proposed.

It is already well known that infants and children infected with COVID-19 develop mild to mod-erate forms of the disease, with fever and oropharyngeal congestion being the most common symptoms. Nevertheless, there are cases in which the patients accuse respiratory symptoms. These cases need lung evaluation, which can be done using lung ultrasound (LUS), because it is a non-irradiating and repeatable imaging technique. 19 children with COVID-19 pneumonia were eval-uated using LUS. The LUS score (LUSS) for each patient varied between 1 to 8 points from a max-imum of 36 points. The arithmetic mean was 4.47 ± 2.36 (S.D), while 95% CI for the Arithmetic mean was 3.33 to 5.61. The lung changes were correlated with their biomarkers, specifically in-flammatory markers. The correlation between LUSS and LDH, D-dimers and IL-6 was a strong positive one with r=0.66 (p=0.01, 95% CI 0.147 to 0.896) between the LUSS and LDH level at symptomatic infants and children (with cough present) and r=0.66 (p=0.01, 95% CI 0.140 to 0.895) between LUSS and D-dimers level at symptomatic infants and children (with cough pre-sent). The results suggest that LUS could be a good imaging technique that can be used both in ini-tial evaluation of children with respiratory diseases, and, also in their follow-up, correlated with symptoms and biomarkers.

The financial sector, too, is developing innovative services and products that have the potential to make a more positive impact on global environmental goals. However, research sheds little light on environmental attitudes and behavioral patterns of employees in this sector. There are multiple factors promoting or inhibiting environmental behavior. Those factors may be rooted in individual or subjective norms, but also social influence and to some extent financial incentives and benefits. A survey concerning the intention to improve and actually show ‘green behavior’ was developed based on widely used acceptance models which differentiate between desirable behavior and the intention to show such behavior. Employees are predominately responsive towards environmental behavior: 20% are convinced of the need to act in a “green” and sustainable manner, only 5% are hard to win over or are not accessible at all. Financial loss or benefits combined with social motives contribute to sustainable living whereas financial benefits alone actually hinder such behavior. The study underlines the existence of a intention-behavior gap: The intention to behave sustainably is built somewhat separately from various influences. There are moderating factors like sex, age and family status that influence the decisions. This then leads to a gap between intention and actual behavior.

Considering increasingly ambitious pledges by countries, pressure from society, investors, and clients further up the supply chain, the question for companies is not so much whether to take decarbonisation action, but what action and by when. However, determining an ideal mix of measures to apply ‘decarbonisation efficiency’ requires more than knowledge of technically feasible measures and how to combine them to achieve the most economic outcome: In this paper, the author describes seven aspects which heavily influence the composition of an ‘ideal mix’ that executive leadership needs to take a (strategic) position on. These aspects consider underlying motivations and span across (socio-)economic, technical, regulatory, strategic, corporate culture and environmental factors and further underline the necessity of clarity of definitions. How these decisions influence the determination of the decarbonisation-efficient ideal mix of measures, both in principle but also in terms of specific impact is further explored by providing examples. What choices are taken by German manufacturers in several of the aspects is disclosed by insights from about 850 responses to the ‘Energy Efficiency Index of German Industry’. Knowledge of the status quo, and clarity in definitions, objectives, time frames and scope are key.

The leather industry is one of the most polluting industries in the world due to the large amounts of waste following the raw hides processing, but also due to the high content of chemicals present in their composition. The main problem of chromium-tanned leather solid waste is related to their storage, because of the ability of chromium to leach in soil or water, and also owing to the high ability of trivalent chromium to oxidize to its toxic form, hexavalent chromium. The purpose of this study is to present the latest methods for extracting trivalent chromium from the composition of solid leather wastes. The extraction methods identified in the present study are based on acid/basic/enzymatic hydrolysis and substitution with the help of organic chelators (organic acids and organic acid salts). In addition, the study includes a comparative analysis between the advantages and disadvantages of each identified extraction method. At the same time, the study also presentes alternative chromium extraction methods based on the combination of conventional extraction methods and ultrasound-assisted extraction.

Laccases are versatile and relatively accessible catalysts with practical/industrial applications. Their proteic nature entails limited stability under non-native conditions, especially such as those that would be required for industrial applications. Here, derivatization of a laccase from Sclerotinia sclerotiorum is reported, using an (methyl-PEG12)3-PEG4) N-succinimide ester in order to improve the thermostability of the enzyme. The PEGylated laccase is characterized using gel electrophoresis, size-exclusion chromatography, catalytic parameters and thermal stability. A 50% increase in residual activity after incubation at 50°C for up to two hours was achieved for the PEGylated laccase compared to the native enzyme.

Background and Objectives: The COVID-19 pandemic influenced the management of patients with immune mediated rheumatic and musculoskeletal diseases (imRMDs) in various ways. The goal of our systematic review was to determine the influence of the first period of the COVID-19 pandemic on the management of imRMDs. Materials and Methods: Systematic literature search of PubMed, Cochrane and Embase databases, including studies with adult patients on the influence of the COVID-19 pandemic on management of imRMDs. There were no restrictions regarding to study-design except for systematic reviews and case reports that were excluded as well as articles on the disease outcomes in case of SARS-CoV-2 infection. Two reviewers screened the studies for inclusion, and, in case of disagreement, consensus was reached after discussion. Results: A total of 5969 potentially relevant studies were found, and, after title, abstract and full-text screening, 35 studies were included with data from 182’746 patients and 2018 rheumatologists. Non-availability of drugs, e.g., hydroxychloroquine and tocilizuab, was frequent (16–69% of patients). Further, medication non-adherence was reported among patients with different RMDs and between different drugs in 4–46% of patients. Changes to preexisting medication were reported in up to 33% of patients (e.g. reducing dose of steroids or cessation of biological disease-modifying antirheumatic drugs). Physical in-office consultations and laboratory testing decreased and as a consequence newly implemented remote consultations increased greatly with an increase of up to 80%. Conclusion: The COVID-19 pandemic influenced the management of imRMDs, especially at the beginning. Influences were wide-ranging, affecting availability of pharmacies, adherence to medication or medication changes, doctor visits and laboratory testing. New systems of care were set up, including virtual clinics and video consultations. These new forms of health care delivery should be spread and implemented worldwide to routine clinical practice to be ready for future pandemics.

This paper intends to delve deeply into the current understanding of the ways in which the transition from a central-based economy to an economy relying on free competition, has led to changes in the big urban centres, bringing about a change in the relationships with the suburban areas. The authors take into account the high population density, the lack of space and the elevated price of terrains inside the big cities, hence urban functions migrate beyond the administrative boundaries, thus favouring the process of suburbanization. Within this context, commercial forces are shifted, migrating from the centre to the urban peripheries, or even outside them. This research is based on a comprehensive process of participative investigation (2012-2022) in Bucharest, Ro-mania’s capital city. The research relies on field investigation, statistical and quantitative analyses and bibliographical sources. The conclusions rely primarily on the idea that political changes cannot be separated from economic, cultural and environmental ones, highlighting globalizing flows and the development of big cities. Industrial activities, strongly developed within a central-based economy, have significantly declined, partly compensated for by the development of the tertiary sector and of commercial services, in particular, leading to a functional reconversion of the urban peripheries and of suburban areas. The conclusions suggest that it is very important to be highly careful towards the dilemmas and provocations ensuing from uncontrolled urban growth, therefore several measures of urban planning should be taken with a view to achieving a better co-operation between urban stakeholders and those from the metropolitan areas so as to attain some common objectives in infrastructure in order to reach an integrated regional development.

The wind industry is looking for ways to accurately predict the reliability and availability of newly installed wind turbines. Failure modes, effects and criticality analysis (FMECA) is a technique utilized for determining the critical subsystems of wind turbines. There are several studies which applied FMECA for wind turbines in the literature, but no studies so far have considered different weather conditions or climatic regions. Furthermore, various design types of wind turbines have been analyzed applying FMECA but no study so far has applied FMECA to compare the reliability of geared and direct-drive wind turbines. We propose to fill these gaps by using Koppen-Geiger climatic regions and two different turbine models of direct-drive and geared-drive concepts. A case study is applied on German wind farms utilizing the WMEP database which contains wind turbine failure data from 1989 to 2008. This proposed methodology increases the accuracy of reliability and availability predictions and compares different wind turbine design types and eliminates underestimation of impacts of different weather conditions.

Groove pancreatitis represents a chronic focal form of pancreatitis affecting the zone between the pancreatic head and the duodenal „C” loop, known as the groove area. This is a rare condition that affects the pancreatic periampullary part, including the duodenum and the common bile duct, associated usually with long-term alcohol and tobacco misuse and being more frequent in men than in women. The most common clinical symptoms of groove pancreatitis include weight loss, acute abdominal pain, nausea, and jaundice. This report is about a 66 year old woman with a history of heavy smoking, presenting with weight loss, nausea, and upper abdominal pain. Contrast enhanced computed tomography revealed the existence of a chronic pancreatitis as well as the dilatation of the main pancreatic duct, a cyst of the pancreatic head and enlargement of the biliary tract. Conservatory treatment was initiated but with no improvement of symptoms. Since there was no indication for endoscopic retrograde cholangiopancreatography, we decided to perform a pancreatoduodenectomy, as surgery appears to be the single effective treatment.

A new Mg-Zn-Zr-Ca alloy in powder state was obtained via mechanical alloying method, from pure elemental powder. Further, the obtained powder-alloy was processed by selective laser melting (SLM) procedure to obtain 3D printed samples for small biodegradable implants. A series of microstructural, mechanical and corrosion analysis were performed. The SEM analysis of powder-alloy reveal a good dimensional homogeneity, with uniform colored, no agglutinated and almost rounded particles, suitable for selective laser melting procedure. Further, the SLM samples reveal a robust and unbreakable morphology, with a suitable porosity and without undesirable balling effect. The tested Young’s modulus of the SLM samples, of 42 GPa, is close to cortical bone one, of 30 GPa. The corrosion tests performed in PBS (Phosphate-buffered saline) solution show that the corrosion parameters have a satisfactory evolution.

The 22q11.2 deletion syndrome (22q11.2DS) is the most common chromosomal microdeletion disorder caused by hemizygous microdeletion of the long arm of chromosome 22. It is now known to have a heterogenous presentation that includes multiple additional congenital anomalies and later-onset conditions, such as gastrointestinal and renal abnormalities, autoimmune disease, variable cognitive delays, behavioral phenotypes and psychiatric illness. The purpose of our paper is to present the case of a fetus diagnosed with a rare and complex cardiac malformation (interrupted aortic arch (IAA) type B, large malalignment-type ventricular septal defect (VSD), pulmonary valve dysplasia, aberrant right subclavian artery (ARSA). The result of the genetic testing revealed 22q11.2 deletion and after genetic counselling the patient decided to continue the pregnancy. She was regularly followed until delivery which took place in Germany so that neonatal cardiac surgery could be performed in an experienced center for cardiac malformations. We emphasize on the ultrasound aspects regarding the cardiac anomaly and specific features of 22q11.2DS in a continuous manner from diagnosis until delivery.

Conductive nanocomposites play a significant role in tissue engineering by providing a platform to support cell growth, tissue regeneration, and electrical stimulation. In this present study, a set of electroconductive nanocomposite hydrogels based on gelatin (G), chitosan (CH) and conductive carbon black (CB) was synthesized with the aim to develop novel biomaterials for tissue regeneration application. Incorporation of conductive carbon black (10, 15 and 20 wt %) significantly improved electrical conductivity and enhanced mechanical properties with the increased CB content. We employed an oversimplified unidirectional freezing technique to impart anisotropic morphology with interconnected porous architecture. An investigation into whether any anisotropic morphology affects the mechanical properties of hydrogel was conducted by performing compression and cyclic compression tests in each direction parallel and perpendicular to macroporous channels. Interestingly, nanocomposite with 10 % CB produced both anisotropic morphology and mechanical property, whereas anisotropic pore morphology diminished at higher CB concentration (15 and 20 %) imparting denser texture. Collectively, the nanocomposite hydrogels showed great structural stability as well as good mechanical stability and reversibility. Under repeated compressive cyclic at 50 % deformation, the nanocomposite hydrogels showed preconditioning, characteristic hysteresis, nonlinear elasticity, and toughness. Overall, the collective mechanical behavior resembled the mechanics of soft tissues. Electrical impedance associated to the hydrogels was studied in terms of modulus and phase in dry and wet condition. The electrical properties conducted in wet conditions, which is more physiologically relevant, showed low impedance at high frequencies due to capacitive currents. Overall, impedance of the nanocomposite hydrogels decreased with increased CB concentrations. These gelatin-chitosan–carbon black nanocomposite hydrogels show great promise for use as conducting substrates for the growth of electro-responsive cells in tissue engineering.

We prove a version of Ekeland Variational Principle (EkVP) in a weighted graph $G$ and its equivalence to Caristi fixed point theorem and to Takahashi minimization principle. The usual completeness and topological notions are replaced with some weaker versions expressed in terms of the graph $G$. The main tool used in the proof is the OSC property for sequences in a graph. Converse results, meaning the completeness of graphs for which one of these principles holds is also considered.

Different external stimuli are perceived by multiple sensor histidine kinases and transmitted by phosphorylation via the phosphotransfer protein Ypd1p in the multistep phosphorelay system of the high osmolarity glycerol signaling pathway of filamentous fungi. How the signal propagation takes place is still not known in detail, since multiple sensor histidine kinase genes in most filamentous fungi are coded in the genome, whereas only one gene for Ypd1 exists. That raises the hypothesis that various Ypd1 isoforms are produced from a single gene sequence, perhaps by alternative splicing, facilitating a higher variability in signal transduction. We found that the mRNA of MoYPD1 in the rice blast fungus Magnaporthe oryzae is subjected to an increased structural variation and amplified putative isoforms on a cDNA level. We then generated mutant strains overexpressing these isoforms, purified the products and present here one previously unknown MoYpd1 isoform on a proteome level. Alternative splicing was found to be a valid molecular mechanism to increase the signal diversity in eukaryotic multistep phosphorelay systems.

Microbiomes, comprised of diverse microbial species and viruses, play pivotal roles in human health, environmental processes, and biotechnological applications and interact with themselves, their environment, and hosts via metabolites and signaling molecules. Our understanding of microbiomes is still limited and hampered by their complexity. A concept improving this understanding is systems biology, which focuses on the holistic description of biological systems utilizing experimental and computational methods. An important set of such experimental methods are metaomics methods which analyze microbiomes and output lists of molecular features. These lists of data are integrated, interpreted, and compiled into computational microbiome models, to predict, optimize, and control microbiome behavior. There exists a gap in understanding between microbiologists and modelers/bioinformaticians, stemming from a lack of interdisciplinary knowledge. This knowledge gap hinders the establishment of computational models in microbiome analysis. This review aims to bridge this gap and is tailored for microbiologists, researchers new to microbiome modeling, and bioinformaticians. To achieve this goal, it provides an interdisciplinary overview of microbiome modeling, starting with fundamental knowledge of microbiomes, metagenomics methods, and modeling formalisms. Furthermore, the review explains model building, examples of microbiome model applications for prediction, optimization, and control. It concludes with guidelines, software, and repositories for modeling. Each section provides entry-level information, serving as a valuable resource for comprehending and navigating the complex landscape of microbiome research and modeling.

Cellular therapies have started an important new therapeutic direction for Autistic Spectrum Disease (ASD), and the ample diversity of ASD pathophysiology and the different types of cell therapies need an equally ample effort for studying the applicable ASD causes and the specific benefits of cell therapies via clinical studies.CORDUS Clinical Study is a crossover study in which autologous cord blood was administered intravenously to 56 patients between January 2019 and July 2023, and has compared its efficacy versus an individualized combination of supplements; both treatments were administered in a different sequence to all participants. Treatment efficacy was evaluated pre- and post- treatments by an independent psychotherapist with ATEC, Q-CHAT and a 16-item comparative table score, after interviews with the children’s parents and therapists.Cord blood was beneficial in the group of 3–7-year-old children (n=28; 3 out of 4 children – 78.57% - improved scores), but was much less effective in kids older than 8 years or with body weight of more than 35 kg (n=28; 1 out of 10 children improved scores). Individualized supplements were more efficacious than cord blood in 5 cases out of 28, while in 23 kids cord blood brought more improvement than supplements; 6 kids registered minor or no improvement. Statistically significant improvements were seen after cord blood infusion on areas such as verbalization and social interaction, but not on irritability or aggressive behavior; also ample individual differences were noted. No serious adverse reactions were noted during and after cord blood or supplement administration.

Recombinant human erythropoietin (rhEPO) treatment is an alternative to erythrocyte transfusions in neonates with anemia of prematurity (AOP). This study assesses the impact of rhEPO administration within the first week of life on the incidence of AOP (any stage, individual AOP stages, and red-blood-cell (RBC) transfusions. Out of 108 preterm neonates, 49 were administered rhEPO and compared to the remaining group using univariate and multivariate analyses. Univariately, gestational age (GA), birth weight (BW), hemoglobin (Hb), hematocrit (HCT), and RBC levels, and iron administration were significantly associated to AOP (p<0.05 each); however, only the latter remained significant after adjusting for covariates (AOR: 2.75, 95% CI, 1.06–7.11). Multinomial analysis revealed rhEOP therapy was associated with a near 3-fold reduction in moderate AOP incidence (OR: 0.36, 95% CI, 0.15–0.89). Furthermore, ANCOVA revealed positive correlations between rhEPO administration and 21-day Hb (p<0.01), HCT (p<0.05), and EPO (p<0.001) levels. The results confirm previously reported benefits of rhEPO treatment, such as reduced moderate AOP incidence and increased Hb, HCT, and serum EPO levels.

The introduction of the Internet of Things (IoT), i.e. the interconnection of embedded devices over the Internet, has changed the world we live in from the way we measure, make calls, print information and even the way we get energy in our offices or homes. The convenience of IoT products, like CCTV cameras, IP phones, and oscilloscopes, is overwhelming for end-users. In parallel, however, security issues have emerged and it is essential for infrastructure providers to assess the associated security risks. In this paper, we propose a novel method to detect IoT devices and identify the manufacturer, device model, and the firmware version currently running on the device using the page source from the web user interface. We performed automatic scans of the large-scale network at the European Organization for Nuclear Research (CERN) to evaluate our approach. Our tools identified 233 IoT devices that fell into eleven distinct device categories and included 49 device models manufactured by 26 vendors from across the world.

The rapid technological development of society determined increased demand for safe potable water and food resources. Unfortunately, this progress causes complex environmental pollution, that is continuously challenging the scholars’ community. Therefore, it is important to chemically analyze the food for a better understanding of pollution-spreading mechanisms. Our study is focused on food analysis originating from Vatra Dornei City, which belongs to Suceava County in the Bukovina region of Romania. It represents a well-known Romanian spa and ski resort in the northern parts of the Oriental Carpathians Mountains. The mountain region owns a lot of mineral resources, mainly consisting of mineral and sparkling waters, uranium, manganese, copper, pyrite, chalcopyrite, polymetallic ores, baryte, gold and silver-bearing orebodies, etc. The present contribution aims to point out the results obtained from the analysis of soil, water and food samples collected from the local markets. The food samples consisted of lettuce, spinach, apples, pork (smoked) chicken meat (raw), milk and cheese. Last year the survey was conducted over six months. The results highlighted that the mining activities carried out during time caused environmental pollution with uranium and heavy metals due to the waste heaps’ weathering phenomena and tailing ponds’ presence.

Wearable exoskeleton solutions for upper limb rehabilitation or assistance, particularly for the hand area, have become increasingly attractive to researchers, proving to be effective over time in treating hand movement impairments following various neurological diseases. In the present work, the development of a wearable exoskeleton-type device for active hand rehabilitation has been addressed, based on fluid actuators made of elastomeric material and on myoelectric control by capturing myoelectric signals from the forearm area. The flexion movement of the fingers (phalanges) is actively assisted by pneumatic actuation of the built-in actuators and the extension movement is assisted by a depressurization control of the actuator. The device has been designed to be as easy to use as possible, light in weight, and to provide a high degree of comfort when used by the patient for rehabilitation training or daily life activities (ADL), which can be performed in the comfort of one's own home.

Abstract: The Willows, belonging to the genus Salix, encompass a vast array of species and hybrids, totaling between 330 to 500 species along with approximately 200 hybrids. These plants are found across continents such as Africa, North America, Europe, and Asia, exhibiting diverse forms ranging from trees to shrubs and prostrate plants. Traditionally, Willows have been utilized in folk medicine due to their rich reservoir of biologically active compounds, with salicin being a notable example, serving as a prodrug for salicylic acid.The chemical composition of Willows is highly diverse, with 322 secondary metabolites identified thus far. These include various classes such as flavonoids (94 types encompassing flavonols, flavones, flavanones, isoflavones, flavan-3-ols like catechins and procyanidins, chalcones, dihydrochalcone, anthocyanins, and dihydroflavonols), phenolic glycosides (76), organic acids (28), non-phenolic glycosides (17), sterols, and terpenes (17), simple phenolics (13), lignans (7), as well as volatiles and fatty acids (69). This rich chemical di-versity underpins the various pharmacological activities exhibited by Willows. The pharmacological properties attributed to Willows are extensive and include analgesic, an-ti-inflammatory, antioxidant, anticancer, cytotoxic, antidiabetic, antimicrobial, antiobesity, neuroprotective, and hepatoprotective effects. These properties make Willows a subject of con-siderable interest in the fields of medicine and pharmacology. In summary, Willows represent a valuable natural resource with a diverse chemical composition and a wide range of pharmacological activities. This study aimed to enhance our comprehension of the medicinal characteristics of willow bark extract, focusing on its antimicrobial properties. This investigation holds significance in validating the traditional usage of willow bark and investi-gating its potential utility in contemporary medicine.

The design flood concept (DF) provides for an essential tool in designing the hydraulic works, in defining the reservoir operation programs and for a reliable flood hazard identification. Under a simplified approach, the maximum discharge and the floods volume are statistically processed to reasonably define the DF. Yet, the integral hydrograph provides additional key temporal and quantitative details of important significance for flood management and particularly for the res-ervoirs operation and associated risks of failures. The procedure presented in this paper (as applied on a set of compatibly shaped hydrographs) involves the following key stages: (i) normalize the floods, (ii) define similar flood shape classes and (iii) evaluate the average dimensionless flood (ADF) for each class. The ADFs are finally transformed into a set of (DF)s. Many statistical distributions approximate acceptably the frequent values of the maximum discharges or the flood volumes, yet displaying a significant spread for medium or rare probabilities of exceedance (PE). This scattering, which can be explained by the epistemic uncertainty, defines an area of uncertainty both for measured and extrapolated values. In considering upper and lower values of the uncertainty in-tervals as limits for maximum discharges and flood volumes, then by combining them compatibly, a set of DFs - as completely defined hydrographs, with different shapes - results for each PE. The herein proposed procedure defines both one peak DF and multi-peaks DF. Subsequently, such DFs do assist water managers in examining and establishing tailored approaches for a variety of input hydrographs. Among the DFs that would correspond to a same PE, the most compact floods arise a special interest, for they are basic in defining the set of safe operation rules for hydraulic structures.

Hepatocellular carcinoma is the most common primary malignant hepatic tumor and occurs most often in the setting of chronic liver disease. Liver transplantation is a curative treatment option and is an ideal solution because it solves the chronic underlying liver disorder while removing the malignant lesion. Because of organ shortages this treatment can only be applied to carefully selected patients according to clinical guidelines to minimize risk of recurrence. Artificial intelligence is an emerging technology with multiple applications in medicine with a predilection for domains that work with medical imaging like radiology. With the help of these technologies laborious tasks like segmentation can be automated and workflow in radiology departments can be improved. Other roles include in depth pixel-wise analysis of lesions by radiomics or deep learning in order to find new imaging criteria that allow better prediction of treatment response or risk of recurrence. Liver transplant is an ideal treatment for patients with hepatocellular carcinoma in the setting of chronic liver disease and artificial intelligence could provide solutions for improving the management of liver transplant candidates to improve survival.

Ground-based high-power lasers enable to, in principle, deorbit any kind of space debris object from the low Earth orbit (LEO) by remotely inducing laser-ablative momentum. However, the assessment of efficiency and operational safety depends on many factors like atmospheric constraints or the risk of debris disintegration during irradiation. We analyze laser momentum for a great variety of target geometries and sizes, and – for the first time in a large-scale simulation – include thermal constraints for laser irradiation configuration. Using a coherently coupled 100 kJ laser system at 1030 nm wavelength, 5 ns pulse duration in an optimized pointing elevation angle range, the pulse frequency should amount to less than 10 Hz to prevent fragment meltdown. For mechanically intact payloads or rocket bodies, repetition rates should be even lower. Small debris fragments sized between 10 and 40 cm can be de-orbited by around 100 to 400 station passes with head-on irradiation while objects exceeding 2 m typically require far more than 1000 irradiations for deorbit. Hence, laser-based debris removal cannot be considered a prime space sustainability measure tackling the top-risk large debris, yet it can provide for remediation of a multitude of small-sized debris using small networks of globally distributed laser sites.

We derive the stabiliser group of the four-vector, also known as Wigner’s little group, in case of massless particle states, as the maximal solvable subgroup of the proper orthochronous Lorentz group of dimension four, known as the Borel subgroup. In the absence of mass, particle states are disentangled into left and right handed chiral states, governed by the maximal solvable subgroups sol2± of order two. Induced Lorentz transformations are constructed and applied to general representations of particle states. Finally, it is argued how the spin-flip contribution is closely related to the occurrence of nonphysical spin operators.

The New World (NW) mammarenavirus group includes several zoonotic highly pathogenic viruses, such as Junin (JUNV) or Machupo (MACV). Contrary to Old World mammarenavirus, these viruses are not able to completely suppress the innate immune response, and trigger a robust interferon (IFN)-I response via retinoic acid-inducible gene I (RIG-I). Nevertheless, pathogenic NW mammarenaviruses trigger a weaker IFN response than their non-pathogenic relatives do. RIG-I activation leads to upregulation of a plethora of IFN-stimulated genes (ISGs), which exert a characteristic antiviral effect either as lone effectors, or resulting from the combination with other ISGs or cellular factors. The dsRNA sensor-protein kinase receptor (PKR) is an ISG that plays a pivotal role in the control of the mammarenavirus infection. In addition to its well-known protein synthesis inhibition, PKR further modulates the overall IFN-I response against different viruses, including mammarenaviruses. For this study, we employed Tacaribe virus (TCRV), the closest relative of the human pathogenic JUNV. Our findings indicate that PKR does not only increase IFN-I expression against TCRV infection, but also affects the kinetic expression and the extent of induction of Mx1 and ISG15 at both levels, mRNA and protein expression. Moreover, TCRV fails to prevent the effect of PKR on viral protein translation and its viral titer is inhibited when PKR is pre-stimulated via IFN-I. Here, we provide first evidence of the specific immunomodulatory role of PKR over selected ISGs, altering the dynamic of the innate immune response course against TCRV. IMPORTANCE: The mechanisms for innate immune evasion are key for emergence and adaptation of human pathogenic arenaviruses, and highly pathogenic mammarenaviruses such as JUNV or MACV trigger a weaker IFN response than non-pathogenic mammarenaviruses. Within the innate immune response context, PKR plays an important role in sensing and restricting the infection of TCRV virus. Although the mechanism of PKR for protein synthesis inhibition is well described, its immunomodulatory role is less understood. In this study, we found that TCRV protein expression and viral propagation are inhibited from early times after infection, and when externally activated, PKR inhibits TCRV viral progeny production. Our present findings further characterize the innate immune response in absence of PKR, unveiling the role of PKR in defining the ISG profile after viral infection.

The group III two-component hybrid histidine kinase MoHik1p in the filamentous fungus Magnaporthe oryzae is known to be a sensor for external osmotic stress and essential for the fungicidal activity of the phenylpyrrole fludioxonil. The mode of action of fludioxonil has not yet been completely clarified but rather assumed to hyperactivate the high osmolarity glycerol (HOG) signaling pathway. To date, not much is known about the detailed molecular mechanism of how osmotic stress is detected or fungicidal activity is initiated within the HOG pathway. The molecular mechanism of signaling was studied using a mutant strain in which the HisKA signaling domain was modified by an amino acid change of histidine H736 to alanine A736. We found that MoHik1pH736A is as resistant to fludioxonil but not as sensitive to osmotic stress as the null mutant ∆Mohik1. H736 is required for fludioxonil action but is not essential for sensing sorbitol stress. Consequently, this report provides evidence of the difference in the molecular mechanism of fludioxonil action and the perception of osmotic stress. This is an excellent basis to understand the successful phenylpyrrole-fungicides’ mode of action better and will give new ideas to decipher cellular signaling mechanisms.

Tree species composition is an important key element for biodiversity and sustainable forest management, and hyperspectral data provide detailed spectral information, which can be used for tree species classification. There are two main challenges for using hyperspectral imagery: a) Hughes phenomena, meaning by increasing the number of bands in hyperspectral imagery, the number of required classification samples would increase exponentially, and b) in a more complex environment, such as riparian mixed forest, focusing on spectral variability per pixel may not be adequate for definability of tree species. Therefore, the focus of this study is to assess spectral-spatial dimensionality reduction of airborne hyperspectral imagery by using minim noise fraction (MNF) transformation, and object-based image analysis (OBIA). An airborne prism experiment (APEX) hyperspectral imagery was used. A study area was a riparian mixed forest located along the Salzach river, and six tree species including Picea abies, Populus (canadensis and balsamifera), Fraxinus excelsior, Alnus incana, and Salix alba were selected. A machine learning algorithm random forest (RF) was used to train and apply a prediction model for classification. Using a spectral dimensionality reduced APEX, a pixel-level classification was also done. According to a confusion matrix, the object-level classification of MNF-derived components achieved the overall accuracy of 85 %, and kappa coefficient of 0.805. The performance of classes according to producer’s accuracy varied between 80% for Fraxinus excelsior, Alnus incana, and Populus canadensis to 90% for Salix alba and Picea abies. Comparison the results to a pixel-level classification, showed a better performance of object-level classification (an overall accuracy of 63% and Kappa coefficient of 0.559 were achieved for pixel-level classification). The performance of classes using pixel-based classification varied 45 % for Alnus incana to 80% for Picea abies. In general, Spectral-spatial complexity reduction using MNF transformation and object-level classification yielded a statistically satisfactory results.

The present study evaluated the antioxidant, antidiabetic properties, and biocompatibility of Medicago sativa and Solidago virgaurea extracts enriched in flavonoid and isoflavonoid compounds. The extracts were obtained by accelerated solvent extraction and laser irradiation. Then, nanofiltration was used for the concentration of flavonoid and isoflavonoid compounds from extracts. The extracts were analyzed for antioxidant capacity using DPPH radical scavenging and reducing power methods, while the antidiabetic property was tested by α-amylase and α-glucosidase inhibition and in vitro on a murine insulinoma cell line (β-TC-6). M. sativa obtained by laser irradiation and concentrated by nanofiltration had the highest DPPH• scavenging (IC50 = 105.2±1.1 and reducing power activities (IC50 = 40.98±0.2 µg/mL). M. sativa extracts had higher inhibition on α-amylase (IC50 = 23.9±1.2, respectively 26.8±1.1), while S. virgaurea had the highest α-glucosidase inhibition (9.3±0.9 ?g/mL respectively 8.6±0.7 ?g/mL). The results obtained after evaluating the antidiabetic in vitro activity showed that the treatment with M. sativa and S. virgaurea flavonoid- and isoflavonoid-rich extracts stimulated the insulin secretion of β-TC-6 cells, both under normal conditions as well as in hyperglycemic conditions. This paper argued that M. sativa and S. virgaurea flavonoid-rich and isoflavonoid-rich extracts could be an excellent natural source with promising antidiabetic potential.

Background: Neonatal transportation of sick newborns is a major predictor of outcome. Prompt identification of the sickest newborns allows immediate corrective intervention and outcome optimization. Multiple severity scores were developed, however an optimal score has not yet been identified. Aim: To identify a rapid, accurate, and easy to perform score predictive for neonatal mortality in outborn neonates. Material and methods: All neonates, irrespective of gestational age, admitted by transfer in our level III regional neonatal unit between 01.01.2015 and 31.12.2021 were included. Infants with congenital critical abnormalities were excluded. Sick neonatal score (SNS) was calculated and compared between survivors and non-survivors. Gestational age (GA), birth weight (BW), gender, Apgar score, place of birth, time between delivery and admission (AT), early onset sepsis were collected from medical records and compared between study groups. Subgroup analysis was performed based on gestational age (preterm versus term infants). A new score was elaborated, including GA, BW, and AT, namely MSNS-AT score, to further improve mortality prediction. The main outcomes were mortality prediction using SNS and MSNS-AT score. Univariable and multivariable analysis, including Cox regression, were performed using SPSS Statistic 22.0. P-value was considered statistically significant if <0.05, 95% confidence intervals, odds ratio and hazard ratios were calculated were appropriate. Results: A total of 418 outborn infants were admitted during study period; 15 infants were excluded due to critical congenital defects. Out of 403 outborn infants, 217 born prematurely (53.8%), 224 males (55.6%), 20 died (4.96%). Compared to the survivors, the non-survivor neonates had significantly lower GA, BW, and SNS score (p<0.05), although only SNS score remained significantly lower in all subgroups (preterm vs term infants). A SNS score ≤8 was associated with mortality both in the whole study group and in subgroups (p<0.001). Time to admission was significantly associated with increased mortality rate in the whole group (p<0.05) and in preterm infants but not in term ones (p>0.05). In univariable and multivariable Cox regression models, MSNS-AT score, with a cut-off optimal value of ≤10 was more precise in predicting mortality compared to SNS (AUC 0.735 vs. 0.775) when applied to the entire group, had a lower accuracy in the term infants (AUC 0.765 vs 0.809) and a better accuracy the preterm infants group (AUC 0.885 vs. 0.810). Conclusions: The MSNS-AT score – calculated by adding GA, BW, and AT to the SNS score - significantly improved mortality prediction at admission in the whole study group as compared to SNS score. The best accuracy prediction of MSNS-AT score was observed in preterm infants suggesting that, besides GA and BW, TA may be decisive for the outcome of outborn preterm infants. Further studies are necessary to confirm the predictive value of MSNS-AT score and to identify variables that can improve its value in term infants without affecting the simplicity, ease, and rapidity of the scoring system.

Despite significant prevention efforts, the numbers of physically inactive individuals, chronic illnesses, exhaustion syndromes and sick leaves are increasing. A still unresolved problem with exercise promotion is the low participation of sedentary persons. This collective term covers heterogeneous subgroups. Their engagement with movement campaigns and resistance to change are influenced by numerous factors. Our aim was to analyse survey data on health, performance, lifestyle habits and the approachability to physical activity campaigns obtained from the Germany-wide ActIv survey. From 2,888 study participants aged 50-60 years, 668 persons were categorised into the subgroups "never-athletes", "sports-dropouts", "always-athletes" and "sports-beginners". Large and significant group differences were found for BMI, assessment of quality of life, health and fitness, risk factors and health problems. 42.5% of "never-athletes" and 32.5% of "sports-dropouts" did not state any barriers to sport. There are substantial disparities between the non-athlete groups in terms of their motivation to exercise. In contrast, there are comparatively minor differences in motivation between "sports-dropouts" and "sports-beginners", whose health and fitness are the primary motivators for sport. Our analyses suggest that (i) negative health and performance trends cannot be compensated by appeals for voluntary participation in exercise programmes and (ii) powerful incentive systems are required.

Industrial data scarcity is one of the largest factors holding back the widespread use of machine learning in manufacturing. To overcome this problem, the concept of transfer learning was developed and it achieved high attention in recent industrial research. Our paper focuses on the problem of time series segmentation and presents the first in-depth research about transfer learning for deep-learning based time series segmentation on the example of industrial end-of-line pump testing. In particularly, we investigate if the performance of deep learning models can be increased by pretraining the network with data from other domains. Three different scenarios are analyzed: source and target data being closely related, source and target data being distantly related, and source and target data being non-related. The results demonstrate that transfer learning can enhance the performance of time series segmentation models in respect to accuracy and training speed. The benefit is most clearly seen in scenarios where source and training data are closely related and the number of target training data samples is lowest. However, in the scenario of non-related datasets, cases of negative Transfer Learning were observed as well. Thus, the research emphasizes the potential, but also the challenges of industrial Transfer Learning.

(1) Background: CTA has validated the use of pericoronary adipose tissue (PCAT) attenuation as a credible indicator of coronary inflammation and plays a crucial role in coronary artery disease (CAD). This study aimed to evaluate the long-term effects of high-dose statins on PCAT attenuation at coronary lesion sites and changes in plaque distribution; (2) Methods: Our prospective observational study included 52 patients (mean age 60.43) with typical chest pain, a low-to-intermediate likelihood of CAD, and documented atheromatous plaque through CCT. We utilized advanced features of the CaRi-Heart® and syngo.via Frontier® systems to assess coronary plaques and changes in PCAT attenuation; (3) Results: Changes in plaque morphology were investigated, revealing significant alterations. Notably, in mixed plaques, calcified portions increased (p &lt; 0.0001), while non-calcified plaque volume (NCPV) decreased (p = 0.0209). PCAT attenuation generally decreased after one year and remained low, indicating reduced inflammation in the following arteries: LAD (p = 0.0142), LCX (p = 0.0513), and RCA (p = 0.1249). The CaRi-Heart® risk also decreased significantly (p = 0.0041). Linear regression analysis demonstrated a correlation between increased PCAT attenuation and higher volumes of NCPV (p &lt; 0.0001, r = 0.3032) and lipid-rich plaque volume (p &lt; 0.0001, r = 0.3281); (4) Conclusions: Our study provides evidence that high-dose statin therapy significantly reduces CAD risk factors, inflammation, and plaque vulnerability, as evidenced by the notable decrease in PCAT attenuation, a critical indicator of plaque progression.

Reinforced concrete (RC) columns are often placed under confinement to increase their strength and ductility. Carbon fiber reinforced polymer (CFRP) materials have recently been recognized as favorable confinement systems. At present, a number of national standards and codes dedicated to the design of concrete components strengthened with CFRP in general and CFRP confinement in particular are available. These sets of rules provide design equations for confined reinforced concrete columns with circular and rectangular cross sections. Most of the standards and codes exhibit significant differences, including the used predictive models limitations, observed effects, and covered loading conditions. In this paper, five international standards and design guidelines are introduced and discussed. The purpose is to present a constructive and critical assessment of the state-of-the-art design methodologies available for CFRP confined RC columns and to discuss effects not previously considered properly. Therefore, some recent research efforts and findings from the Leipzig University of Applied Sciences are also introduced. The obtained data is used for a comparative study of the guideline predictive equations. Furthermore, it is shown that some new findings concerning the rupture strength and the maximum strength plus accompanying axial strain of a CFRP confined column are suitable to improve the current guidelines.

Abstract: (1) Background: After the COVID-19 pandemic, there is increasing concern regarding the immunity of population to SARS-CoV-2 variants, particularly the Omi-cron variant and its sub-lineages. (2) Methods: The study involved analyzing the im-mune response and symptomatology of 27 vaccinated individuals who were subse-quently infected by Omicron sub-lineages. Blood samples were collected for serological analysis, including the detection of IgG antibodies reactive to the Nucleocapsid (N) and Spike (S) antigens of SARS-CoV-2. Additionally, participants were interviewed to assess the intensity of symptoms during the infection. (3) Results: Despite the high levels of anti-Spike IgG observed after vaccination, all participants were infected by Omicron sub-lineages. The most common symptoms reported by participants were fever or chills, sore throat, and cough. Surprisingly, the levels of anti-Spike IgG found prior to infection did not correlate with symptom severity post-infection. However, it was observed that high post-infection anti-Nucleocapsid IgG levels correlates with mild symptoms during the course of the disease, suggesting a potential role for anti-N antibodies in disease resolution. (4) Conclusions: The high levels of IgG anti-Spike resulting from vaccination may not provide complete protection against infection by the Omicron variant. Addi-tionally, our data suggest that anti-Nucleocapsid IgG titers are negatively correlated with the intensity of the symptoms during mild infections. These findings underscore the importance of ongoing surveillance of viral variants and continuous adaptation of vaccination strategies to ensure efficacy against SARS-CoV-2 variants.

Bisphenol A is a remarkable chemical compound for its many applications mainly in the plastics industry, but also for its toxic effects on the environment and human health. BPA (4,4-isopropylidenediphenol) is an anthropogenic compound, moderately soluble in water (120 – 300 mg/l) at room temperature, and highly soluble in alkaline solutions, ethanol and acetone. BPA can bioconcentrate, bioaccumulate and biomagnify through food webs until it reaches humans. To prevent this, effective strategies are sought to allow its removal from the environment, through physico-chemical or enzymatic methods, advanced oxidation, adsorption and biodegradation, ultrasonic degradation. This article shows a comparative study regarding adsorption of BPA on Active carbon and zeolitic tuff, ZTC. In this paper, the characterization of the zeolitic tuff Rupea adsorbent, was carried out from an elemental and mineralogical point of view, pore size and elemental distribution, using SEM, EDAX, and XRD analysis. The pore size varies from 30 nm to 10 µm, atomic ratio Si/Al≥4, and the 80 % of mineralogical composition represent Ca Clinoptilolite zeolites Ca Clinoptilolite zeolite ((Na1.32K1.28Ca1.72Mg0.52)(Al6.77Si29.23O72)(H2O)26.84). Also, a comparative study of the adsorbtion capacity of bisphenol A from synthetic solutions on activated carbon type - Norit GAC 830 W, GAC, as well as on Clinoptilolite-type zeolitic tuff, ZTC, Rupea, was carried out. The experiments were carried out at a temperature of 20 ºC, a pH of 4.11; 6.98 and 8.12, and ionic strength being assured using KCl of 0.01 M, and 0.1 M. The adsorption capacities of GAC and ZTC tend to 115 mg/g and 50 mg/g respectively, at 8.12 pH and ionic strength of 0 M. The Langmuir mathematical model most faithfully describes the adsorption equilibrium of BPA. The maximum adsorption capacity for both adsorbents increases with increasing pH, and decreases with increasing ionic strength.