Myiasis is a medical condition in humans caused by the larvae and worms of certain types of flies, specifically the Sarcophagidea species. If this parasitic infection occurs in the external part of the eye, it is known as external ophthalmomyiasis. This condition is more commonly found in the Mediterranean and the Near East and is rare in North America. Objective: This report and review aim to describe and compare the risk factors, clinical course, and parasitologic features of external ophthalmomyiasis. We also discuss the different preventive measures in a large case series reported from January 2000 to December 2022. Methods: We report the first case of external ophthalmomyiasis in Mexico caused by Lucilia sericata in an adolescent with no clinical risk factors. Additionally, we perform a literature review of reported cases of external ophthalmomyiasis to determine the clinical characteristics, therapeutic management, and information on the organisms that most commonly cause external ophthalmomyiasis. Results: A total of 312 cases of external ophthalmomyiasis were recorded, with 208 cases in males (66.7%) and 102 cases in females (32.7%). In two cases, the gender and species responsible for the ophthalmomyiasis were not reported (0.6%). The mean age of those affected was 32.1 ± 18.5 years, ranging from newborns to 91 years old. The male-to-female ratio was 2:1. The most common causative organism was Oestrus ovis, accounting for 72.1% of cases, followed by Dermatobia hominis at 5.4%, Lucilia sericata at 0.96%, and Chrysomyia bezziana at 0.96%. Before experiencing symptoms, 43.6% of cases reported having direct contact with flies or being hit in the eye, 33% reported no associated risk factors, 9.3% reported living with sheep and goats, and 7.7% reported a history of foreign objects entering the eye. The most common symptoms for those affected by Oestrus ovis were sudden onset, including a foreign body sensation and movement, redness, tearing, itching, swelling, irritation, photophobia, burning, and ocular secretion. In cases caused by Dermatobia hominis, symptoms included eyelid edema, pain, redness, itching, movement within the lesion, ocular irritation, and discharge. Regarding occupational or recreational activity, agriculture and livestock had the highest incidence, followed by trades and technical activities, being a student, and having traveled to an endemic region for work or recreation. Conclusion: Patients with red eyes may suffer from external ophthalmomyiasis, which requires a thorough examination to diagnose and treat it early. Moreover, as the temperature increases due to climate change, it is essential to consider how this will affect the spread of different pathogens. Specifically, the life cycle of Oestrus ovis is greatly influenced by temperature, which suggests that the incidence of ophthalmomyiasis will rise with warmer temperatures.

From the formalism of the thermodynamics of irreversible processes and the theory of complex systems, characterization of longevity and aging and its relationship with the emergence and evolution of cancer was carried out. It was found that: 1. The rate of entropy production can be used as an index of robustness, plasticity, the aggressiveness of cancer, and as a measure of biological age; 2. The aging process, as well as the evolution of cancer, goes through what we have called “biological phase transition”; 3. The process of metastasis, which occurs through epithelial-mesenchymal transition (EMT), appears as a phase transition far from thermodynamic equilibrium and exhibits Shilnikov chaos-like dynamic behavior. This dynamic guarantees the robustness of the process and, in turn, its unpredictability; 4. It was shown that as the ferroptosis process is strengthened, the complexity of the dynamics associated with the emergence and evolution of cancer decreases. The theoretical framework developed contributes to a better understanding of the biophysical-chemical phenomena of longevity and aging and their relationship with cancer.

An overview of the link between nonequilibrium thermodynamics and complexity theory is offered. It is shown how the rate of entropy production can be quantified through the spectrum of the Lyapunov exponents. It was shown how the entropy production per unit of time meets the necessary and sufficient conditions to be a Lyapunov function and constitutes per se an extremal principle. The entropy production fractal dimension conjecture was established. It is shown how the rate of entropy production as a non-extremal criterion represents an alternative way of sensitivity analysis of differential equations. Finally, an extension to biophysical-chemical systems, on the one hand, the use of the dissipation function is shown, as a thermodynamic potential out of equilibrium, in the characterization of biological phase transitions. On the other hand, it was evidenced how the rate of entropy production represents a physical quantity to evaluate the complexity and robustness of cancer.

In studies of dynamic stability and power quality, it is necessary to know the mechanical parameters that determine the transient response of a wind turbine. The exact value of these parameters is not as decisive as the power curve can be, but an estimate that is far from reality can distort or even invalidate the simulation results. Despite its importance, this information, especially the inertia, but also the stiffness and damping constant of the drive-train, is hardly available for the turbine model under investigation. In this work, the different bibliographical sources that provide values of blade inertia in kg·m2 will be reviewed, and above all, those that provide a distribution of masses along the span of the blade. With this, different reliable relations will be obtained that allow calculating the inertia of the turbine rotor, based on the mass and length of the blade. When the center of gravity is also available, a very correlated expression is provided to obtain the inertia. The even rarer references to the stiffness and damping constant of the drive-train will also be reviewed.

Annually, more than 1.5 million preventable new hepatitis B (HBV) infections continue to occur, with an estimated global burden of 296 million individuals living with chronic hepatitis B infection. This substantial health challenge results in over 820,000 annual deaths attributed to complications such as liver cirrhosis and hepatocellular carcinoma (HCC). HBV vaccination remains the cornerstone of public health policy to prevent chronic hepatitis B and its related complications. It serves as a crucial element in the global effort to eliminate HBV, as established by the World Health Organization (WHO), with an ambitious 90% vaccination target by 2030. However, reports on global birth dose coverage reveal substantial variability, with an overall coverage rate of only 46%. This comprehensive review thoroughly examines global trends in HBV vaccination coverage, investigating the profound impact of vaccination on HBV prevalence and its consequences across diverse populations, including both high-risk and general demographics. Additionally, the review addresses the formidable challenges and facilitating factors essential for achieving WHO's HBV vaccination coverage objectives and elimination strategies in the coming decade and beyond.

Aluminum base alloys containing chromium (Cr) and zinc (Zn) were produced using extrusion and heat treated powder metallurgy. Cr addition ranged between 5 to 10 wt. % while Zn was added in an amount between 0 to 20 wt. %. Heat treatment processes were performed during powder metallurgy process at different temperatures followed by water quenching. Similar alloys were extruded, with an extrusion ratio of 4.6 to get proper densification. Optical microscopy was used for microstructure investigations of the produced alloys. The element distribution microstructure study was carried out using the Energy Dispersive X-ray analysis method. Hardness and tensile properties of the investigated alloys have been examined. Wear resistance tests were carried out and the results were compared with these of the Al-based bulk alloys. Results showed that the aluminum base alloys containing 10wt. % Chromium and heat treated at 500°C for one hour followed by water quenching exhibited the highest wear resistance and better mechanical properties.

This paper investigates the influence of magnetic field for a two dimensional deformations on a two temperature problem at the free surface of a semi-infinite semiconducting medium under the effect of mechanical force during a photothermal theory and the effect of hydrostatic initial stress on the medium. The Harmonic Wave Method (Normal Mode Analysis) has been used to obtain the equations of elastic waves, heat conduction equation, quasi-static electric field, carrier density, two temperature coefficient, ratios, and constitutive relationships for the thermo-magnetic-electric medium. The effects of several parameters as thermoelastic and thermoelectric coupling parameters and two temperature parameter of this force on the displacement component, force stress, carrier density and temperature distribution has been depicted graphically.

The paradigm of molecular communications is applied to the concrete case for delivering electrically charged nanoparticles to tumor. Once them have been injecetd in blood it is expecetd an optimal outcome as to reduce toxicity and minimal dispersion of drugs in the blood stream. With a fraction of nanoparticles arrives to surface of tumor, the scattered part of injected ones can minimize the success of scheme of drug delivery. In this paper is presented a theory based at the sequence electrodynamics-diffusion-Bayes theorem. The resulting probability of Bayes at the end of sequence, might be telling us that dynamical processes based in the injection of electrically charged nanoparticles might be dictated by stochastic formalism more that biochemical approaches by which makes impossible to know the success or fail of drug delivery dynamics. Illustrations demonstrating the transition of a linear to nonlinear scenario are presented

Lewis Carroll, both logician and writer, suggested a logical paradox containing furthermore two connotations (connotations or metaphors are inherent in literature rather than in mathematics or logics). The paradox itself refers to implication demonstrating that an intermediate implication can be always inserted in an implication therefore postponing its ultimate conclusion for the next step and those insertions can be iteratively and indefinitely added ad lib, as if ad infinitum. Both connotations clear up links due to the shared formal structure with other well-known mathematical observations: (1) the paradox of Achilles and the Turtle; (2) the transitivity of the relation of equality. Analogically to (1), one can juxtapose the paradox of the Liar (for Lewis Carroll’s paradox) and that of the arrow (for “Achilles and the Turtle”), i.e. a logical paradox, on the one hand, and an aporia of motion, on the other hand, suggesting a shared formal structure of both, which can be called “ontological”, on which basis “motion” studied by physics and “conclusion” studied by logic can be unified being able to bridge logic and physics philosophically in a Hegelian manner: even more, the bridge can be continued to mathematics in virtue of (2), which forces the equality (for its property of transitivity) of any two quantities to be postponed analogically ad lib and ad infinitum. The paper shows that Hilbert arithmetic underlies naturally Lewis Carroll’s paradox admitting at least three interpretations linked to each other by it: mathematical, physical and logical. Thus, it can be considered as both generalization and solution of his paradox therefore naturally unifying the completeness of quantum mechanics (i.e. the absence of hidden variables) and eventual completeness of mathematics as the same and isomorphic to the completeness of propositional logic in relation to set theory as a first-order logic (in the sense of Gödel (1930)’s completeness theorems).

Gold clusters protected by 3-MBA ligands (MBA = mercaptobenzoic acid, -SPhCO2H) have attracted recent interest for their unusual structures and advantageous ligand-exchange and bioconjugation properties. Azubel et al. first determined the core structure of an Au68-complex, which was estimated to have 32 ligands (3-MBA groups). To explain the exceptional structure-composition and reaction properties of this complex, and its larger homologs, Tero et al. proposed a “dynamic stabilization” via carboxyl O-H--Au interactions. Herein, we report the first results of an integrated LC/MS analysis of unfractionated samples of gold / 3-MBA clusters, spanning the narrow size range 13.4 to 18.1 kDa. Using high-throughput procedures adapted from bio-macromolecule analyses, we show that integrated capillary HPLC-ESI-MS, based upon aqueous-methanol mobile phases and ion-pairing reverse-phase chromatography, can separate several major components from the nanoclusters mixture that may be difficult to resolve by standard native gel electrophoresis due to their similar size and charge. For each component, one obtains a well-resolved mass spectrum, nearly free of adducts or signs of fragmentation. A consistent set of molecular mass determinations is calculated from detected charge-states tunable from 3- (or lower), to 2+ (or higher). One thus arrives at a series of new compositions (n, p) specific to the Au/3-MBA system. The smallest major component is assigned to the previously unknown (48, 26); the largest one is evidently (67, 30), vs. the anticipated (68, 32). Various explanations for this discrepancy are considered. A prospective is given for the several members of this novel series, along with a summary of the advantages and present limitations of the micro-scale integrated LC/MS approach to characterize such metallic-core macro-molecules, and their derivatives.

Forty-five male Dorper crossbred lambs (40.17 ± 0.35 kg BW) were used in order to investigate the effects of the duration of calcium propionate (CaPr) supplementation in lambs finished with zilpaterol hydrochloride (ZH) on the productive performance, carcass characteristics, and meat quality. Lambs were individually housed and fed a finishing-diet for 42 d before being slaughtered. Lambs received the following treatments: 1) No additives (CTL), 2) ZH supplementation for 28 d (with 3 d ZH withdrawal before slaughter) at a dosage of at 7.2 mg/kg diet (ZH), for treatments 3, 4, and 5, lambs received ZH and 10g CaPr/lamb/d throughout the entire phase (42 d), or during the last 28 or 14 d before slaughter. Compared to CTL, ZH lambs exhibited a similar average daily gain (ADG) but had lower dry matter intake (DMI), leading to increased feed efficiency. Supplementing with ZH alone did not affect carcass traits, visceral mass, whole cuts, or meat quality. Lambs that received both CaPr and ZH exhibited quadratic increases (p < 0.05) in final BW (FBW), ADG, and dressing percentage (D%). These increases were optimal at an estimated inclusion durations of 26 d for FBW, 30 for ADG, and 39 d for D%. The ADG:DMI ratio and the longissimus muscle area (LMA) both exhibited quadratic increases (p < 0.05). The optimal duration of CaPr supplementation for ADG:DMI ratio was found to be 28 d, while for LMA, it was 14 d. As the period of CaPr supplementation increased, there was a linear increase (p <0.05) in hot carcass weight, leg circumference, and whole cuts of breast IMPS209 and shoulder IMPS207. Cook loss percent increased quadratically (p < 0.05), being higher when CaPr was included for an estimated duration of 26 d. As the duration of CaPr supplementation increased, the purge loss percentage (PLR) also increased linearly (p < 0.05). In conclusion, including CaPr in the diet for a duration of 28 d in lambs improved the response to ZH supplementation on the productive performance, carcass weight and some whole cuts. However, it can also have a negative effect on PRL%.

Background: General Practitioners (GP) have an important role in the prevention of suicidal behavior. The purpose of this study was to explore their views and experiences of identifying and assessing suicidal ideation. Methods: Ten GPs were recruited through convenience sampling, based on accessibility, interest and willingness to participate. In-depth interviews were carried out and results transcribed ver-batim. Aspects of experiences with suicidal patients emerged through the thematic analyses process. Results: The GPs described the varied clinical picture when patients presented in their office. How they identified depressive symptoms apart from originally somatic complaints, formed a trusting relationship and addressed suicide ideation. They described customized interventions as well as obstacles and factors that facilitated communication: time, own personal traits, pa-tient’s disclosure and organizational barriers. Conclusions: The levels of the suicidal process among patients in general practice vary greatly. GPs adjust their appraisals to profundity understand and intervene in order to prevent a crisis to escalate into subsequent suicidal behavior.

This study examines the relationship between semantic memory and social cognition in schizophrenia, addressing how these cognitive domains intersect. Semantic memory, which includes general world knowledge and word meanings, was evaluated using verbal fluency tasks and the Camels and Cactus Test. Social cognition, essential for social interaction, was assessed through emotion recognition (Faces Test) and Theory of Mind (Hinting Task). Participants included 50 individuals with schizophrenia and 30 controls. The schizophrenia group showed significantly lower performance on both semantic memory and social cognition tasks. Notably, strong correlations were found between the Camels and Cactus Test and social cognition measures, suggesting that social cognition deficits in schizophrenia may be linked to semantic memory impairments. Regression analyses highlighted that the Camels and Cactus Test significantly predicted social cognition performance, independent of symptomatology. These findings underscore the interconnectedness of semantic memory and social cognition in schizophrenia, suggesting that semantic memory deficits, particularly in non-categorical associations, play a important role in social cognitive impairments. This study provides new insights into the cognitive underpinnings of schizophrenia, emphasizing the need for further research to explore these relationships and their implications for cognitive models and therapeutic interventions.

The digital economy, driven by information and communication technologies (ICT), has profoundly transformed in recent decades. The digitalization of society has given rise to an economic environment in which information, connectivity, and innovation play fundamental roles. In this context, a technology that has emerged as a fundamental pillar of the digital economy is the chain of blocks, commonly known as blockchain. Blockchain is a technology that has revolutionized the way online data and transactions are managed and shared. Through its ability to create secure, transparent, and decentralized ledgers, blockchain has paved the way for the digital economy, facilitating trust in digital transactions and enabling various applications ranging from cryptocurrencies to supply chain management and intellectual property. This study will delve into blockchain and its influence on the digital economy. It will explore how this technology has reshaped how companies interact, how consumers access services, and how new business models are developed in a constantly evolving digital environment. Additionally, the challenges and opportunities that blockchain presents in the context of the digital economy will be analyzed, and how it is helping to shape the future of business and society in general. As the exploration of blockchain and its impact on the digital economy progresses, it becomes evident how these two forces converge, generating a promising digital landscape full of significant opportunities and transformations. This phenomenon is consistently supported by a growing body of research and analysis, which underlines the growing influence of blockchain on the global economy (Smith, 2020; Johnson, 2019). The dynamic interplay between these two spheres, blockchain and the digital economy, constantly evolves and offers an exciting glimpse into the future regarding innovation and disruption across various sectors (Jones, 2021; Brown, 2018). As a result, significant opportunities are looming for those seeking to understand and capitalize on these emerging trends (García, 2022). Throughout this study, the current trends and most intriguing perspectives that shape this landscape will be broken down, offering a deeper insight into how blockchain and the digital economy are shaping an extraordinary digital future

This work presents a design and model of the thermo-hydrodynamic behavior applying CFD for pin-fin heat sink with square shape (rectangular fin profile), through a novel pin arrangement that improves heat removal in the system. The novelty consist in the insertion of a deflector row that will help to direct the flow, so it hits the rectangular cross-sectional fins the presents in the system. The heat sink model is placed in channel designed in which air flows as suitable medium, and its overall performance is investigated. In addition, a constant heat flux is applied to the bottom wall of the heat sink model, equal values and amounts that​ correspond to the heat fluxes generated by current electronic equipment and devices. The numerical results of the global thermal resistance, the pressure drop and the Nusselt number are reported. The results allow determining best arrangement or geometry configuration, location and functionality of the fin-deflectors were collocated for evaluate thermal-hydraulic efficiency of system.

Hybrid Renewable Energy Systems (HRES) integrate renewable sources, storage, and optionally conventional energies, offering an eco-friendly solution to fossil fuels. Microgrids (MGs) bolster HRES integration, enhancing energy management, resilience, and reliability at various levels. This study, emphasizing the need for refined optimization methods, investigates three themes: renewable energy, microgrid, and multiobjective optimization (MOO), through a bibliometric analysis of 470 Scopus documents from 2010-2023, analyzed with SciMAT software. It segments the research into two periods, 2010-2019 and 2020-2023, revealing a surge in MOO focus, especially in the latter period, with a 35% increase in MOO-related research. This indicates a shift towards com-prehensive energy ecosystem management that balances environmental, technical, and economic elements. The initial focus on MOO, genetic algorithms, and energy management systems has expanded to include smart grids and electric power systems, with MOO remaining a primary theme in the second period. The increased application of Artificial Intelligence (AI) in optimizing HMGS within the MOO framework signals a move towards more sustainable, intelligent energy solutions. Despite progress, challenges remain, including high battery costs, the need for reliable MOO data, the intermittency of renewable energy sources, and HMGS network scalability issues, highlighting directions for future research.

This study aimed to evaluate the effects of Blazepod technology when incorporated with various training regimens on the essential elements of physical fitness in volleyball, such as agility, speed, visual response time, and vertical leap. Thirty-six participants (age :17.33±0.48 y, height: 183.78±6.34 cm, weight: 77.14±5.16 kg) were in-volved in this study. In randomized design, three equal groups with two experimental groups and one control group were involved in the study over a period of six weeks: (GE1) used Blazepod technology to workout at a low level; (GE2) used Blazepod technology to workout at a higher intensity; (CG) did not employ Blazepod technology, but it adhered to the same fundamental training curriculum. We conducted agility, speed, reaction time, and vertical jump tests before, midway and after the study to determine optimal training volume, intensity, and frequency. A significant main effect of time (P0.01), and time×group interaction (P>0.001) were found for all tests. Post hoc test showed that the two experimental groups gadget significantly improved in all performance variables (P

The paper presents models of path and control planning for parking, docking, and movement of autonomous vehicles at low speeds considering space constraints. Given the low speed of motion, and in order to test and approve the proposed algorithms, vehicle kinematic models are used. Recent works on the development of parking algorithms for autonomous vehicles are reviewed. Bicycle kinematic models for vehicle motion are considered for three basic types of vehicles: passenger car, long wheelbase truck, and articulated vehicles with and without steered semitrailer axes. Mathematical descriptions of systems of differential equations in matrix form and expressions for determining the linearization elements of nonlinear motion equations that increase the speed of finding the optimal solution are presented. Options are proposed for describing the interaction of vehicle overall dimensions with the space boundaries, within which a maneuver should be performed. An original algorithm that considers numerous constraints is developed for determining vehicle permissible positions within the closed boundaries of the parking area, which are directly used in the iterative process of searching for the optimal plan solution using nonlinear model predictive control (NMPC). The process of using NMPC to find the best trajectories and control laws while moving in a semi-limited space of constant curvature (turnabouts, roundabouts) are described. Simulation tests were used to validate the proposed models for both constrained and unconstrained conditions and the output (state-space) and control parameters' dependencies are shown. The proposed models represent an initial effort to model the movement of autonomous vehicles for parking and has the potential for other highway applications.

Background and Objectives: The techniques directed to the cranial field in osteopathy are the most questioned due to the lack of scientific evidence. In osteopathic practice, manual palpation is essential and, therefore, measuring reliability is fundamental. The objective of study is to assess the reliability and validity of osteopathic treatment depending on experience. Materials and Methods: A cross-sectional study of reliability and validity was conducted. For measurements, a strain gauge was placed on the sphenobasilar synchondrosis of the skull base, and three maneuvers (lateral compression, anteroposterior compression and compression maneuver of the mastoids) were repeated 25 times each by osteopaths with different time of experience (5-10 years, 1-5 years, <1 year). Measurement averages were computed for each of the three maneuvers to verify the average effect of each group in comparison to that of the Gold Standard (GS) (>10 years of experience). Data were analyzed to check for inter- and intra-observer reliability using intra-class correlation coefficients (ICC). Results: Reliability and validity in 5-10 experience of observer 1 and observer 2 in the tree maneuvers was excellent (p<0.001) against GS. Poor or enough reproducibility and concordance were observed in osteopaths with less experience. Conclusion: Experience of osteopaths determines the efficacy of cranial maneuvers in osteopathic treatment for patients’ rehabilitation.

Due to the high impact of the building sector on the environment, a growing interest focuses on insulating materials able to ensure good thermo-acoustic performance for the building envelope, in a sustainable and circular economy perspective. In this context, Moroccan natural gypsum was mixed with natural waste local materials. Thermal and acoustic properties of the samples were measured; they were compared to those of synthetic- and mineral-based gypsum plasters, manufactured with the same technique. A Small Hot Box apparatus was used for thermal characterization, whereas acoustic performance was investigated by means of a Kundt’s Tube. Natural and synthetic additives involved a reduction in density and an improvement in thermal performance. Conductivity values in the 0.181 – 0.238 W/mK range were obtained, depending on the type of natural additive, with respect to 0.275 – 0.323 W/mK of mineral-based gypsum plasters. The acoustic measurements showed that all the composites have similar performance in terms of acoustic absorption, whereas high Transmission Loss values were obtained for the natural additives (TL = 35 – 59 dB). Petiol of Palm and Stipa Tenacissima were found as the materials able to improve both thermal and acoustic properties.

The last few years have witnessed an explosion of research on Sustainable development. Most of this research is concentrated on the developed countries related to the issues not compatible with developing countries. This paper fills the gap and reviews the literature related to developing and emerging economies and their environmental and social constraints under Renewable energy and sustainable development (RESD). It also investigates how RESD can be implemented in the presence of serious issues pertaining to population increase, shortage of energy supply, lack of transportation, shortage of clean water, less food production and bad environmental systems and these are coupled with war, and hunger and political instability. The main contribution of this paper is to present extensive discussion in the context of hypotheses of economic growth and its association with energy consumption, and renewable energy options for sustainable development.

Abstract Introduction Minimally invasive approaches to oncological liver resection is common in many hepatobiliary centres. This study aims to compare the key oncological and survival outcomes of patients with colorectal liver metastases (CRLM) undergoing laparoscopic or open resections using propensity score matching (PSM). Methods A single-centre retrospective study was performed using a prospective database of patients undergoing liver resection for CRLM between January 2016 and December 2019. Different co-variates were selected for matching using PSM. Pre-matching and post-matching analyses were compared. Surgical and survival outcomes were analysed. Results In total, 303 patients who met the inclusion criteria were identified: 214 underwent open liver resection (OLR) and 91 laparoscopic liver resection (LLR). LLR had a significantly reduced length of intensive treatment unit (ITU) and overall in-patient stay but longer pringle and operative times. In the unmatched cohort, the median overall and disease-free survival time was significantly longer in patients undergoing laparoscopic compared with open surgery. A PSM model demonstrated significantly reduced blood loss and length of hospital stay, with a significantly greater Pringle and operative time in the LLR group. Differences seen in overall and disease-free survival were lost with propensity score matching, possibly due to lack of bi-lobar disease within the minimally invasive group. Conclusion In selected patients with CRLM, LLR presents similar survival and oncological outcomes with the advantages of the short-term results associated with the laparoscopic approach.

This document introduces a new cryptosystem mixing two improvement standards generally used for text encryption, in order to give birth a new color image encryption algorithm capable of dealing with known attacks. Firstly, two substitution matrixes attached to a strong replacement function will be generated for advanced Vigenere technique application. At the end of this first round, the output vector is subdivided into size blocks according to the used chaotic map, for acting a single enhanced Hill circuit insured by a large inversible matrix. A detailed description of such a large involutive matrix constructed using Kronecker products will be given. accompanied by a dynamic translation vector to eliminate any linearity. A solid chaining is established between the encrypted block and the next clear block to avoid any differential attack. Simulations carried out on a large volume of images of different sizes and formats ensure that our approach is not exposed to any known attacks.

This research aims to introduce a new technique, off-site and self-form segmental concrete masonry arches fabrication, without the need of construction formwork or centering. The innovative construction method in the current study encompasses two construction materials forms the self-form masonry arches, wedge-shape plain concrete voussoirs, and Carbon Fibers Reinforced Polymers (CFRP) composites. The employment of CFRP fabrics was for two main reasons; bond the voussoirs and forming the masonry arches. However, CFRP proved to be efficient for strengthening the extrados of the arch rings under service loadings. An experimental test conducted on four sophisticated masonry arch specimens. Research parameters were using thicker keystone as well as the partial strengthening of the self-form arch ring at the intrados. Major test finding was the use of thicker Keystone, alter the behavior of the self-form arch, considerably increased the load carrying capacity by 79%. Partial strengthening of the intrados with CFRP fabrics of typical arch ring Keystone resulted considerable increased the debonding load of fabrication CFRP sheets by 81%, increase the localized crushing load by 13%, and considerably increase voussoir sliding load by 107%.

Concrete beams built from individual segments connected to each other by special mechanism referred as segmental beam. The aim of this research is to exhibit a new technique for fabrication of small scale segmental beams from wedge shape unreinforced concrete segments and pultruded carbon fiber reinforced polymers (CFRP) in laminate form. Eight segmental beams including two parameters are tested experimentally. The first parameter is the area of CFRP and second is the adhesive material used to bond segments of the beams. The test shows that segmental beams have a higher ratio of CFRP area undergoes less deflection and sustain higher ultimate loading value of 38.4%. Moreover, the test of beams with concrete segments adhered by epoxy resin sustain a higher load than segments adhered by cementitious materials about 11.87%. Theoretically, segmental beams were analyzed by modified American Concrete Institute ACI 440.2R-17 report with slight modifications. The analysis results in an overestimation of flexural strength of segmental beams when compared with experimental outcomes.

Three-dimensional (3D) cell culture systems can be regarded as suitable platforms to bridge the huge gap between animal studies and two-dimensional (2D) monolayer cell culture to study chronic diseases such as cancer. In particular, the preclinical platforms for multicellular spheroid formation and culture can be regarded as ideal in vitro tumor models. The complex tumor microenvironment such as hypoxic region and necrotic core can be recapitulated in 3D spheroid configuration. Cells aggregated in spheroid structures can better illustrate the performance of anti-cancer drugs as well. Various methods have been proposed so far to create such 3D spheroid aggregations. Both conventional techniques and microfluidic methods can be used for generation of multicellular spheroids. In this review paper, we first discuss various spheroid formation phases. Then, the conventional spheroid formation techniques such as bioreactor flasks, liquid overlay and hanging droplet technique are explained. Next, a particular topic of the hydrogel in spheroid formation and culture is explored. This topic has received less attention in the literature. Hydrogels entail some advantages to the spheroid formation and culture such as size uniformity, the formation of porous spheroids or hetero-spheroids as well as chemosensitivity and invasion assays and protecting from shear stress. Finally, microfluidic methods for spheroid formation and culture are briefly reviewed.

The changing epidemiology of Staphylococcus aureus has created several gaps in its population structure and emergence of strains. Two global shifts in the aftermath of the past methicil-lin-resistant S. aureus (MRSA) pandemic are: a rise in healthcare-associated infections and evolu-tion of cutaneous and soft tissue infections with high morbidities and mortalities. Furthermore, bitter lessons from COVID-19 showed S. aureus necrotizing-pneumonia and skin conditions ag-gravating Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) and Monkeypox manifestations. Limited data and paucity of high-quality evidence exist for many key clinical questions. Using clinical microbiology, molecular characterization, hospital data on age and in-fection sites, and antibiograms, we have investigated S. aureus infection patterns. We showed that age-specific distribution in both intensive care unit (ICU) and non-ICU revealed highest infection rates (94.7%) in senior-patients >50 years; most were MRSA (81.99%). However, specific distribu-tions of geriatric MRSA and MSSA rates were 46.5% and 4.6% in ICU and 35.48% and 8.065% in non-ICU, respectively. Intriguingly, age groups 0-20 years showed uniquely similar MRSA pat-terns in ICU and non-ICU patients (13.9%, 9.7%, respectively) and MSSA in ICU (11.6%). In age groups 20-50 years, MRSA were 2-fold in non-ICU (35%) than ICU (18.6%). Interestingly, highly significant association was found between infection-site and age-groups (P-value .000). Skin in-fections remained higher in all ages; pediatrics 32.14%, adults 56%, and seniors 25% while res-piratory infections were lower in pediatrics (14.3%) and adult 17%), and highest in seniors (38%). Blood and “other” sites in pediatrics recorded (28.6%; 25%, respectively), slightly lower in adults (18.6%; 8.6%) and seniors (14%); 22.8%), respectively. Further, significant association existed between infection-site and MRSA (Chi-Square Test, P-value .002). The common cutaneous infec-tions across all age-groups and the significant association of MRSA to geriatric-respiratory infec-tions have a high potential for skin-carriage as reservoir for endogenous infection. The similar frequencies of both lineages in youth in all settings imply MSSA-carriage as potential evolutionary origins for MRSA. These findings have important clinical implications for strategic planning in patient management and S. aureus control particularly in age-specific infections and vigilance for potential viral coinfections.

One of the most promising advancements in healthcare is the application of digital twin technology. Digital twins are virtual replicas of real-world human patients and can be used for monitoring, and diagnosis, and as a tool to design treatment strategies tailored to individual patients. Furthermore, digital twins could also be helpful in finding novel treatment targets and predicting the effects of drugs and other chemical substances in development. This review article delves into the various data sources and methodologies that contribute to the construction of digital twins. Each data source, including blood glucose levels, heart MRI and CT scans, cardiac electrophysiology, written reports, and multi-omics data, comes with different challenges regarding standardization, integration, and interpretation. We showcase how various datasets and methods are used to overcome these obstacles and generate a digital twin. While digital twin technology has seen significant progress, there are still hurdles in the way to achieving a fully comprehensive patient digital twin. Developments in non-invasive and high-throughput data collection, as well as advancements in modeling and computational power will be crucial to improve digital twin systems. We discuss a few critical developments in light of the current state of digital twin technology. Despite challenges, digital twin research holds great promise for personalized patient care and has the potential to shape the future of healthcare innovation.

In this paper, we proposed the fusion of two projection based face recognition algorithms: local binary Patterns in DCT domain and singular value decomposition (SVD) characterized by its simplicity and efficiently. Standard databases ORL are used to test the experimental results which prove that proposed system achieves more accurate face recognition as compared to individual method.

This study presents the substantiation, development, and analysis of a technique for planning the autonomous vehicle (AV) motion reference parameters. The trajectory plan, speed and acceleration distributions, including other AV's kinematic parameters, are determined using sequential optimization. The study objectives are based on an analysis of the fundamental problems of AV motion planning summarized in this area's latest publications. The proposed approach combines the basic principles of the finite element method (FEM) and nonlinear optimization with nonlinear constraints. First, the generalization on representing an investigated function by finite elements (FE) is briefly described. A one-dimension FE with two nodes and three degrees of freedom (DOF) in a node was chosen as the basic one, corresponding to the 5th-degree polynomial. Next, a method for determining the motion trajectory is presented. The following are considered: formation of a restricted space for the AV's allowable maneuvering, the geometry of motion trajectory and its relation with vehicle steerability parameters, cost functions and their influences on the desirable trajectory's nature, compliance of nonlinear restrictions of the node parameters with the motion area boundaries. At the second stage, a technique for optimizing AV speed and acceleration redistribution is presented. The model considers possible combinations of cost functions, conditions of limiting the kinematic parameters with the tire slip critical speed, maximum speed level, maximum longitudinal acceleration, and critical lateral acceleration. In the simulation section, several variants of trajectories were searched and compared. Several versions of distributing the longitudinal speed and acceleration curves are determined, and their comparative analysis is fulfilled. At the end of the paper, the advantages and drawbacks of the proposed technique are noted. The conclusion is made regarding the options for improving the method in further studies.

The study is devoted to the issues of mathematical modeling and simulating the sport differential mechanism (DM) with controllable torque redistribution. The issue is caused by the elaboration of ADAS systems with the automated torque vectoring for transmissions of all-wheel-drive (AWD) vehicles and the inclusion of such devices in the combined autonomous vehicle trajectory control scheme. At the article's beginning, the use of devices for redistributing traction forces is reasoned by analyzing the curvilinear vehicle motion, where they could ensure the accuracy of vehicle steerability. The literature review highlights modern developments in the field of modeling and researching such DMs. Considering the vehicle turn with a minimum radius, the conditions corresponding to passing greater torque over the outrunning rear axle are determined. All the mechanism's components and loads acting between them are described in detail. To form an original method of mathematical description of the mechanism functioning, the system of differential equations, systems of kinematic and force connections are considered separately. The article details the mathematical approach to generalize the way for automating the equation compilation for rotational mechanical systems such as vehicle transmissions. In the simulation section, a Simulink model reflecting the functional components and calculation procedures is presented. A series of testing and simulations on the DM operation with forcible torque distribution is carried out. Modeling data are presented, and the analysis of simulation results is performed. In the completion, conclusions are made regarding the scope and use of this model and the prospects for further developing the method proposed to automate the formation of equation systems.

In passing maneuvers on two-lane highways, assessing the needed distance and the potential power reserve to ensure the required speed mode of the passing vehicle is a critical task of speed planning. This task must meet several mutually exclusive conditions that lead to successful maneuver. The paper addresses three main aspects. First, the issues of rational distribution of the speed of the passing vehicle for overtaking a long commercial vehicle on two-lane highways are discussed. The factors that affect maneuver effectiveness are analyzed, considering safety and cost. Second, a heuristic algorithm is then proposed based on the rationale for choosing the necessary space and time for overtaking. The initial prediction's sensitivity to fluctuations of current measurements of the position and speed of the overtaking participants is examined. Third, an optimization technique for passing vehicle speed distribution over the overtaking time using the finite element method is presented. The adaptive model predictive control is applied for tracking the references being generated. The presented model is illustrated using simulation.

The lack of suitable autologous grafts and poor compliance of existing prostheses have prompted the study of novel materials for vascular graft design. Polyurethanes (PUs) were used in the past because they have high compliance and properties that are similar to those of native tissue. In this work, the mechanical properties of a group of PUs in two states (non-hydrated and hydrated) were studied using uniaxial tensile tests, strain sweep tests, and multi-step creep recovery tests. Additionally, a hyper-elastic model based on the Mooney–Rivlin strain density function was fitted and used to model the performances of the PUs under physiological pressure and geometry conditions. The tensile tests revealed a softening phenomenon after hydration, which could potentially reduce patient discomfort and risk of vascular trauma. The ultimate strength values after hydration were similar to those reported for other vascular conduits. The strain sweep showed a strong strain dependency of the modulus indicating non-linear viscoelasticity. In the creep-recovery tests, increasing the polyethylene glycol(PEG) content enhanced the viscous flow, while the elastic behavior was enhanced with the largest concentration of polycaprolactone diol (PCL). On the other hand, under simulated physiological conditions, the compliance of the PUs showed a cyclic behavior with the time and pressure but was not affected by the radii and thickness variation, which could increase the graft compliance and geometry mismatch. Nevertheless, the compliance could be tuned using the material composition. This paper studied the biomechanics of a group of materials under simulated physiological conditions (Temperature, hydration, and pressure) to select those that could perform better for further vascular graft design.

When a low-salience stimulus of any type of sensory modality—auditory, visual, tactile—shortly precedes an unexpected startle-like stimulus, such as the acoustic startle reflex, the startle motor reaction becomes less pronounced or is even abolished. This phenomenon is known as prepulse inhibition (PPI), and it provides operational measures of information processing by filtering out irrelevant stimuli. Because PPI implies plasticity of a reflex and is related to automatic or attentional processes, depending on the interstimulus intervals, this behavioral paradigm might be considered a potential marker of short- and long-term plasticity. Assessment of PPI is directly related to the examination of neural sensorimotor gating mechanisms, which are plastic adaptive operations for preventing overstimulation and help the brain focus on a specific stimulus among other distracters. Despite their obvious importance in normal brain activity, little is known about the intimate physiology, circuitry, and neurochemistry of sensorimotor gating mechanisms. In this work, we extensively review the current literature focusing on studies that used state-of-the-art techniques to interrogate the neuroanatomy, connectomics, neurotransmitter-receptor functions, and sex-derived differences in the PPI process, and how we can harness it as biological marker in neurological and psychiatric pathology.

The present paper examines the impact of herding behavior on market capitalization in the Egyptian stock market before and after the disclosure of environmental-social-governance scores (ESG Score Index). This line of thought and research contributes to the literature on the interrelationships between ESG factors and market dynamics. Consequently, the evolving landscape of how to sustain investments in emerging markets like Egypt can be enlightened. Two main hypotheses were tested in the paper. The first hypothesis is on the expected significant impact of herding behaviour on market capitalization. The second hypothesis is on the expected positive impact of ESG on the relationship between herding behaviour and market capitalization. Panel data analysis using data extracted from financial statements of 22 Egyptian EGX 30 companies, over the period 2018-2023 will be used. This is to control for the cross-section and time characteristics of the research sample. The empirical findings reveal a positive significant effect of herding behavior on market capitalization before disclosing ESG scores. Another finding is that after the implementation of mandatory ESG disclosure, the relationship between herding behavior and market capitalization is strengthened. Moreover, it is empirically evident that companies with higher ESG performance attract more investments and higher valuations. The importance of ESG in shaping investment decision-making, enhancing transparency, and market dynamics has important policy implications.

To assess the degree to which it has met its commitments under the Paris Agreement, Morocco is called upon to carry out carbon assessments and transparent evaluations. Within the forestry sector, little is known about the role of Morocco’s forests in contributing to carbon uptake. With this aim, we applied for the first time in literature the 3-PG model to Cedrus atlantica ((Endl.) Manetti ex Carrière, 1855), which represents about 131.800 ha of Morocco’s forest area (i.e. Azrou forest). Through the Differential Evolution - Markov Chains (DE-MC) we tested and assessed the sensitivity and calibrated the 3-PG model. This process-based model provided significant results regarding the carbon sequestration capacity. The results showed the following: i- Parameters related to stand properties, canopy structure, and processes, as well as biomass partitioning, are the most important or sensitive for the performance of the model; ii- The DE-MC method optimized the values of the 3-PG parameters which was confirmed by the means of Gelman-Rubin convergence test; iii- According to the predictions of the calibrated 3-PG, the Net Primary Production in the pure Azrou forest varies between 0.32 and 7.88 tC.ha−1.yr−1, it is equal in average to 4.9 tC.ha−1.yr−1, which given the total area corresponds to 7078 tC.yr−1.

Vectorial Boolean functions and codes are closely related, and each corresponding domain gives been to each other. On the one hand, various requirements of binary linear codes are needed for their theatrical interests but, more importantly, for their practical applicants (such as few-weight codes or minimal codes for secret sharing, locally recoverable codes for storage, etc.). On the other hand, various criteria and tables have been introduced to analyse the security of S-boxes that are related to vectorial Boolean functions, such as the Differential Distribution Table (DDT), the Boomerang Connectivity Table (BCT), and the Differential-Linear Connectivity Table (DLCT). In previous years, two new tables have been proposed for which the literature was pretty abundant: the $c$-DDT to extend the DDT and the $c$-BCT to extend the BCT. In the same vein, we propose extended concepts to study further the security of vectorial Boolean functions, especially the $c$-Walsh transform, the $c$-autocorrelation, and the $c$-differential-linear uniformity, and its accompanying table, the $c$-Differential-Linear Connectivity Table ($c$-DLCT). We study these properties of the novel functions at their optimal level concerning these concepts and describe the $c$-DLCT of the crucial inverse vectorial (Boolean) function case. Finally, the derived functions could lead to new families of binary minimal codes, as the recent achievements on minimal codes from low differential uniformity. We draw new avenues for future research toward linear code designs.

Background: Despite their generally favorable prognosis, hepatic fibrosis remains a possible complication for hepatitis B virus (HBV) inactive carriers. This study aimed to estimate the prevalence of significant fibrosis and associated risk factors among Omani HBV inactive carriers. Methods: A retrospective study was conducted of 200 Omani HBV inactive carriers visiting a tertiary hospital in Muscat, Oman, between January 2017 and December 2018. Significant fibrosis (stage F2 or higher) was identified using two-dimensional shear-wave elastography. Baseline clinical, laboratory, and radiological data were analyzed to determine associations. Results: Of the total sample, 106 patients (53%) were male, and the mean age was 44.6 ± 9.3 years. The prevalence of significant fibrosis was 20% (n = 40). Male gender (p = 0.007), age ≥60 years (p = 0.024), and fatty changes in liver ultrasound (p = 0.044) were found to be independent factors for significant fibrosis. Conclusion: the prevalence of significant fibrosis was relatively high among a sample of Omani HBV inactive carriers, with several sociodemographic and clinical risk factors identified. Periodic assessment of liver function is needed for patients with these risk factors; moreover, routine biochemical parameters could be useful predictors of disease prognosis. Further research is recommended to substantiate these findings.

The initial dilution generated by the final disposal of untreated wastewater through a submarine outfall in Santa Marta was examined with a near-field dilution model. Northward and eastward seawater velocity, salinity, and temperature profiles from a 3D hydrodynamic model were used to provide the oceanic conditions to calculate the dilution. At the wastewater discharge site, the upwelling phenomenon occurs two times a year, the major from December to March and the minor in July, eliminating the stratification condition of seawater. The results of the dilution model showed that in these periods the plume reaches the water surface achieving dilutions greater than 100. In addition, the external wave effect on the initial dilution of submarine outfall discharge in Santa Marta was determined. Surface waves increase dilution during the dry period of the year when trade winds increase the surge and start the upwelling phenomenon. The Dilution with/without waves factor is up to 1.90 for the center of the plume on the water column.

After a time away from the classrooms and laboratories due to the global pandemic, the return to the teaching activities during the semester represented a challenge to both teachers and students. Our particular situation in a Microbial Physiology course was the necessity of imparting in a shorter time, laboratory practices that usually take longer. This article describes a two-week long laboratory exercise that covers several concepts in an interrelated way: conjugation as a gene transfer mechanism, regulation of microbial physiology, production of secondary metabolites, degradation of macromolecules and biofilm formation. Utilizing a Quorum Quenching (QQ) strategy, the Quorum Sensing (QS) system of Pseudomonas aeruginosa is first attenuated. Then, phenotypes regulated by QS are evidenced. QS is a regulatory mechanism of the microbial physiology that relays on signal molecules. QS is related in P. aeruginosa to several virulence factors, some of which are exploited in the laboratory practices presented in this work. QQ is phenomenon by which QS is interrupted or attenuated. We utilized a QQ approach based on the enzymatic degradation of the P. aeruginosa QS signals in order to put in evidence QS-regulated traits that are relevant for our Microbial Physiology course.

High maternal mortality in the developing countries, particularly in Nigeria, poses serious challenge to achieving the maternal mortality target of the Sustainable Development Goals (SDGs) in the countries. Hence, there is need for multifaceted approach to curtailing the scourge. Women being the victims of maternal mortality, this study finds the effect of their household decision making power in reducing maternal mortality. The study used data from the 2013 Nigeria Health and Demographic Survey (NDHS) and logistic regression model to explore the relationship between women household decision making power and maternal mortality in Nigeria. The finding shows that women who decide and participate in household decision on own health, major purchases and visit to family and relatives were 35% (OR = 0.65, 95% CI: 0.52, 0.83), 27% (OR = 0.73, 95% CI: 0.57, 0.92), and 37% (OR = 0.63, 95% CI: 0.50, 0.80) less likely to experience maternal mortality, respectively, compared to those whose husbands alone decide. Women household decision making power is therefore instrumental to reducing maternal mortality. It is thus important for policy makers, particularly in Nigeria, to pay more attention to social and cultural factors that surround women household decision making ability for speedy reduction in maternal deaths.

The rapid development in industries manufacturing plastic bags is taking serious consideration to save the environment and human health, one way or the other. This study examines the composition of degradable and non-degradable plastic bags collected from the markets of different sectors of Islamabad. Hundred samples of both Degradable and non-degradable plastic bags were collected from the open market. The concentrations, proportion, and patterns of different heavy metals (additives) were used in the production of both degradable and non-degradable plastic bags by using the standard method with the help of Hands Held X-Ray Fluorescent (HHXRF) instrument. Samples results of the study showed Titanium, Calcium and Copper used in massive amounts, some of the toxic metals i.e., Arsenic, Lead, Cadmium, Chromium and Mercury were also detected. This study also reveals that degradable plastic bags might be more hazardous than non-degradable plastic bags because due to the Photolytic properties of additives used in degradable plastic bags when the chains of polymers break, the heavy metals are released in environment and become the part of it. So, concern department like Ministry of climate change and Pakistan Environmental Protection Agency should take serious step to control these serious issues.

1) Background: There are few studies of burnout syndrome (BS) in occupational therapists (OTs), and protective factors of BS has received little attention in the scientific literature. This research aimed to estimate the prevalence of BS, characterize the associated psychosocial factors, and analyze their relationship with health in a sample of Spanish OTs. (2) Methods A total of 127 therapists completed the Maslach Burnout Inventory (MBI) and other standardized questionnaires measuring: personality traits (reduced five-factor personality inventory, NEO-FFI), coping styles (Coping Strategies Questionnaire, CAE), work-family conflict (Survey Work-Home Interaction Nijmegen, SWING), professional factors (role ambiguity/clarity and modified role conflict questionnaires), and the perception of health (Goldberg’s General Health Questionnaire). Several correlational and multiple regression analyses were performed to study the psychosocial predictors of burnout and its relationship with health perception. (3) Results showed that 15.8% of the professionals presented BS, with emotional exhaustion (EE; 38.7%) being the most compromised dimension. Neuroticism, role conflict, negative work-family interaction, and open emotional expression (OE) significantly predicted a higher EE. The main predictors of cynicism (CY) were being male, role conflict, and OE. Finally, role conflict and role ambiguity and social support-seeking were significant predictors of reduced professional efficiency (PE). (4) Conclusion: A high percentage of OTs with BS advocates becoming aware of the importance of this syndrome in the health community, it would be critical to consider the protective factors (i.e., emotional management, social support) that help promote OTs’ well-being and health.

The evolution of some epidemics, as influenza, shows common patterns both in different regions and from year to year. On the contrary, epidemics like the novel COVID-19 show quite heterogeneous dynamics and are extremely susceptible to the measures taken to mitigate their spread. In this paper we propose empirical dynamic modeling to predict the evolution of influenza in Spain’s regions. It is a non-parametric method that looks into the past for coincidences with the present to make the forecasts. Here we extend the method to predict the evolution of other epidemics at any other starting territory and we test also this procedure with Spanish COVID-19 data. We finally build influenza and COVID-19 networks to check possible coincidences in the geographical distribution of both diseases. With this, we grasp the uniqueness of the geographical dynamics of COVID-19.

The purpose of water treatment through ultraviolet (UV) radiation is to interrupt the development and multiplication of microorganisms by preventing their growth and reproduction.Ultraviolet treatment has become a very affordable solution to produce clean water of optimal quality in regions where access to drinking water is essential. The experimental water treatment unit is powered by a photovoltaic (PV) source. It incorporates a discharge lamp used to generate ultraviolet radiation, which is harnessed to address bacteriological issues related to water quality. This lamp is continuously powered by a photovoltaic (PV) source through an inverter and an electronic ballast. The water treatment system also includes a motor pump designed to draw contaminated water from the input reservoir, a flow control valve to adjust flow rates as needed, and a filter aimed at enhancing the quality of the contaminated water. The water circulates between the input reservoir (contaminated water) and the output reservoir (treated water) through the UV lamp. The relationship between the intensity of the UV lamp and the water flow rate can ensure an adequate water quality.

Whole-genome sequencing has advanced our understanding of the population structure of the pathogenic species complex Cryptococcus gattii, which has allowed for the phylogenomic specification of previously described major molecular type groupings and novel lineages. Recently, isolates collected in Mexico in the 1960s were determined to be genetically distant from other known molecular types and were classified as VGVI. We sequenced four clinical isolates and one veterinary isolate collected in the southwestern U.S. and Argentina during 2012-2021. Phylogenomic analysis groups these genomes with those of the Mexican VGVI isolates, expanding VGVI into a clade and establishing this molecular type as a clinically important population. These findings also potentially expand the known Cryptococcus ecological range with a previously unrecognized endemic area.

Manual material handling (MMH) significantly impacts worker health and productivity, often leading to musculoskeletal disorders (MSDs) primarily in the lower back. As a novel assistive technology, exoskeletons may serve as ergonomic tools to mitigate these work-related MSDs. It is essential to examine exoskeletons from the users’ perspectives before their widespread implementation in occupational settings. This study investigates the effectiveness of a passive back-support exoskeleton (BExo) in reducing perceived physical exertion and improving ergonomic safety in manufacturing context. Twenty-two college students were recruited to perform MMH tasks in a controlled lab environment, both with and without the BExo, followed by completing a survey questionnaire on various aspects of the BExo. Using ANOVA, the study analyzed biomechanical exertion across various body parts and tasks. The findings indicate that the BExo substantially alleviates discomfort in the low back, shoulders and knees, thereby, enhancing ergonomic posture and reducing fatigue. These results underscore the potential of passive exoskeletons to boost workers’ safety and efficiency, providing valuable insights for future ergonomic strategies in industrial setting.

The livestock sector can be a major contributor to the mitigation of greenhouse (GHG) emissions. Within the sector, beef production produces the largest proportion of the livestock sector’s direct emissions. The objective of this study was to assess the on-farm GHG emissions in semi-arid rangelands in Argentina and to identify the relationships between emissions and current farm management practices. A survey recorded detailed information on farm management and characteristics. Assessments of GHG emissions were based on the IPCC Tier 2 protocols [1]. The relationships between farm management and GHG emissions were identified using General Linear Models. Cluster analysis was used to identify groups of farms that differed from others in emissions and farm characteristics. Emissions per product sold were low on farms that had improved livestock care management, rotational grazing, received technical advice, and had high animal and land productivities. Emissions per hectare of farmland were low on farms that had low stocking rates, low number of grazing paddocks, little or no land dedicated to improved pastures and forage crops, and low land productivity. Our results suggest that the implementation of realistic, relatively easy-to-adopt farming management practices has considerable potential for mitigating GHG emissions in semi-arid rangelands of central Argentina.

Identifying groups that share common features among datasets through clustering analysis is a typical problem in many fields of science, particularly in post-omics and systems biology research. In respect of this, quantifying how a measure can cluster or organize intrinsic groups is important since currently there is no statistical evaluation of how ordered is, or how much noise is embedded in the resulting clustered vector. Many of the literature focuses on how well the clustering algorithm orders the data, with several measures regarding external and internal statistical measures; but none measure has been developed to statistically quantify the noise in an arranged vector posterior a clustering algorithm, i.e., how much of the clustering is due to randomness. Here, we present a quantitative methodology, based on autocorrelation, to assess this problem.

Purpose: Young transgender and non-binary are exposed to situations of discrimination and have a greater risk of violence. The purpose of this study is to analyze which protective, violence and health and well-being factors have more influence on transgender and non-binary people compared to cisgender people. Method: The sample comprised 856 people between 14 and 25 years old. A survey including questions about sociodemographic information and protective, violence and health and well-being factors was designed ad hoc for this study. Results: The results show non-binary group received the least support from family and friends, higher risk of suffering cyberbullying and a higher feel isolated and unhappy. Non-binary and transgender have suffered more verbal attacks both inside and outside their school and physical attacks at school than cisgender young. Conclusions: These results are important and may contribute to promote public policies and clinical interventions to favor the integration of non-binary and transgender people in our society.

The health benefits of extra virgin olive oil (EVOO) are related with its chemical composition and the presence of bioactive compounds with antioxidant properties. The aim of this study was evaluate antioxidant compounds (pigments, CoQ10 and phenolic compounds) and antioxidant properties of EVOO from the same region comparing different cultivars (Hojiblanca and Arbequina), harvest year and crop stage. Antioxidant properties of oils were studied before and after a gastrointestinal digestion process, by in vitro assays (DPPH, ABTS and FRAP) and antioxidant markers in Caco-2 cells (reactive oxygen species production). The content of bioactive compounds measured was significantly affected by cultivar and harvest year (except for carotenoids) and by the crop stage (except for coenzyme Q10). Higher amount of coenzyme Q10 was observed in Hojiblanca than in Arbequina EVOO. Total phenol content and antioxidant properties were also different depending on cultivar and harvest year and the in vitro digestion process strongly improved antioxidant marker values. Antioxidant potential in bioaccessible fractions was mainly related with content of coenzyme Q10 and phenolic compounds in EVOO. Chemometric analysis showed that the oils were clearly classified by cultivars, harvest and crop stage, according with chemical composition and antioxidant activity analyzed in the present study

In remote sensing applications, one of the key points is the acquisition, real-time pre-processing and storage of information. Due to the large amount of information present in the form of images or videos, compression of this data is necessary. Compressed sensing (CS) is an efficient technique to meet this challenge. It consists in acquiring a signal, assuming that it can have a sparse representation, using a minimal number of non-adaptive linear measurements. After this CS process, a reconstruction of the original signal must be performed at the receiver. Reconstruction techniques are often unable to preserve the texture of the image and tend to smooth out its details. To overcome this problem, we propose in this work, a CS reconstruction method that combines the total variation regularization and the non-local self-similarity constraint. The optimization of this method is performed by the augmented Lagrangian which avoids the difficult problem of non-linearity and non-differentiability of the regularization terms. The proposed algorithm, called denoising compressed sensing by regularizations terms (DCSR), will not only perform image reconstruction but also denoising. To evaluate the performance of the proposed algorithm, we compare its performance with state-of-the-art methods, such as Nesterov's algorithm, group-based sparse representation and wavelet-based methods, in terms of denoising, and preservation of edges, texture and image details, as well as from the point of view of computational complexity. Our approach allows to gain up to 25% in terms of denoising efficiency, and visual quality using two metrics: PSNR and SSIM.

Climate change and rapid urbanization are adversely affecting the urban environment by exacerbating the widely reported Urban Heat Island effect in Dhaka, Bangladesh. Two wetland areas with variable riparian shadings in the warm-humid conditions of urban Dhaka had been investigated through field campaigns on microclimatic parameters for their cooling potential on the surrounding urban fabric. It was observed that an inversion layer of fully saturated air develops over the water surface of wetland, suppressing evaporation from the wetland water surface layer, which was effectively reducing the heat exchange between the water surface and the air layer above it through its action as an insulating vapor blanket. Because of this effect, the wetland was unable to render as a source of coolth for the surrounding overheated urban area. This effect of the inversion layer was more pronounced in the urban wetland without riparian shading either by urban form or tree canopy. A Multiphysics simulation study conducted on the selected urban wetlands indicates the effect of differential shading pattern on the relation between fetch and inversion layer thickness. This research hypothesizes that the wetland can act as an urban adaption measure against the urban heat island effect by potentially transforming them into Urban Cooling Island (UCI) towards a favorable urban bioclimate.

Antimicrobial resistance (AMR) poses a critical global health threat, leading to approximately 1.27 million deaths annually from infectious diseases resistant to existing antibiotics. Factors such as antibiotic misuse and environmental contamination have accelerated AMR, with the COVID-19 pandemic exacerbating the issue due to increased antibiotic usage. However, the development of new antibiotics has stagnated, with only a few approved in recent years, and many facing resistance. Among the priority pathogens identified by the WHO, Pseudomonas aeruginosa stands out as a significant concern due to its multidrug resistance and virulence. P. aeruginosa infections are challenging to treat due to intrinsic and acquired resistance mechanisms, as well as its ability to form biofilms. Additionally, P. aeruginosa produces a plethora of virulence factors, including proteases, siderophores, and toxins, further complicating treatment. Quorum sensing (QS) systems play a crucial role in regulating bacterial physiology and virulence factor expression. P. aeruginosa employs three QS systems, making it an attractive target for quorum quenching (QQ) strategies. Enzymes such as AHL lactonases, acylases, and oxidoreductases have shown promise in inhibiting QS, thus reducing virulence without impacting bacterial growth. Furthermore, natural QS inhibitors produced by various organisms offer potential therapeutic alternatives. Despite promising results in vitro, translating QQ strategies to clinical settings remains challenging. Nevertheless, QQ represents a novel approach in combating multidrug-resistant infections and warrants further investigation as a complementary therapeutic strategy alongside traditional antibiotics. This review summarizes enzymes with Qurorum Quenching activity evaluated against the pathogen P. aeruginosa and their potential applications in combination therapies.

An impaired healing response underlies diabetic foot wounds chronicity, frequently translating in amputation, disability, and early mortality. In addition, diabetics frequently suffer of the underappreciated episode of post-epithelization ulcer recurrence. Recurrence epidemiological data are alarmingly high; so that the ulcer is considered in “remission” and not healed for the time it remains epithelialized. Recurrence may result from the conspiracy of behavioral and biological factors. Although the damaging role of behavioral, clinical predisposing factors is undebatable, the role of endogenous biological signalers that prime the residual scar tissue to recurrence has remained elusive. We propose that ulcer recurrence is deeply impinged by chronic hyperglycemia and its downstream biological effectors, which originate epigenetic drivers that enforce abnormal pathologic phenotypes to dermal fibroblasts, and keratinocytes as memory cells. Hyperglycemia-derived cytotoxic reactants accumulate and modify dermal proteins, reduce scar tissue mechanical tolerance, and disrupt fibroblasts-secretory activity. Accordingly, the combination of epigenetic and local and systemic cytotoxic signalers, induce the onset of “at-risk phenotypes” as premature skin cells aging, dysmetabolism, inflammatory, pro-degradative, and oxidative programs that may ultimately converge to scar cells demise. Unfortunately, post epithelialization recurrence rates data are missing in clinical studies of accepted ulcer healing therapies during follow-up periods. Intra-ulcer infiltration of epidermal growth factor exhibits the most consistent remission data with the lowest recurrences during 12-month follow-up. Recurrence data should be regarded as a valuable clinical endpoint during the investigational period for each emergent healing candidate.

Background: Asthma is a widespread chronic respiratory disease that poses a significant public health challenge. The current study investigated the associations between air pollution and asthma severity among individuals residing near the Sohar industrial port (SIP) in Oman. Despite the presence of multiple major industrial complexes in Oman, limited knowledge regarding their impact on respiratory health is accredited. Hence, the primary objective of this study is to offer valuable insights into the respiratory health consequences of industrial air pollution in Al Batinah North. Methods: The state health clinics' records for patient visits related to asthma were collected for the timeframe spanning 2014 to 2022. Exposure was defined as the distance from SIP, Majan Industerial Area (MIA) and Sohar Industerial Zone (SIZ) to determine high, intermediate, and low exposure zones (12 km, respectively). Exposure effect modifications by age, gender, and smoking status were also examined. Results: The conducted cross-sectional study of 410 patients (46.1% males and 53.9% females) living in over 17 areas around SIP revealed that 73.2% of asthmatics were under 50 years old, with severity significantly associated with closeness to the port. Risk ratios were estimated to be (RR:2.42; CI95%: 1.01–5.78), (RR:1.91; CI95%: 1.01–3.6), and (RR:1.68; CI95%: 0.92–3.09) for SIP, MIP and SIZ areas, respectively, compared to the control area. Falaj Al Qabail (6.4 km) and Majees (6 km) had the highest number of asthma patients (N. 69 and N. 72), and highest percentages of severe asthma cases among these patients (28% and 24%) with significant risk ratios (RR:2.97; CI95%: 1.19–7.45 and RR:2.55; CI95%: 1.00–6.48), correspondingly. Moreover, severe asthma prevalence peaked in the 25-50 age group (RR:2.05; CI95%: 1.26–3.33), and this linkage between asthma and age was much more pronounced in males than females. Smoking and exposure to certain contaminant (dust and smoke) increased also the risk of severe asthma symptoms, but their effects were less important in the high risk zone, suggesting much more important risk factor. A neural network model accurately predicted asthma risk (94.8% accuracy), with proximity to Sohar Industrial Port as the most influential predictor. Conclusion: The study highlights the High asthma burden near Sohar Industrial Port, linked to port proximity and smoking and wind direction as major risk factors. These findings inform vital public health policies to reduce air pollution and improve respiratory health in the region, prompting national policy review.

Self-compacting concrete (SCC) production is a complex operation that requires finding a good combination and a suitable dosage of each of its constituents. Several formulation methods have been developed to meet the workability requirements of SCC. In this paper, the relationships between the fresh properties of SCC based on local metakaolin (MK) and the spreading of its mortar was investigated. The results showed the existence of good correlations between the spreading of the mortar and the fresh state properties of the related SCC and that the MK substitution rate did not affect these correlations. The choice of the mortar flow rate should target appropriate fresh properties of the SCC and a viscosity enhancing agent (VEA) could be used if the mix is too fluid and present an instability.

The evolution of transportation has been inextricably tied to the progress of civilization. Through innovation, the automobile business has been working to improve safety, quality, and compliance with environmental regulations. Electric vehicles have made significant strides in this area, but optimizing their efficiency requires a special focus because they expend energy that can be recovered in a variety of ways. Energy harvesting, a cutting-edge technology that captures wasted energy from vehicles, has recently received a lot of attention as it constitutes a means to improve the efficiency of electric vehicles. Dissipated energy can be converted into electricity using regenerative energy recovery systems and put to various uses. This study tenders a thorough examination into energy recovery technologies which could be applied to the various types of energy dissipated in electric vehicles. Firstly, the paper investigates the possible sources of energy recoverable from an electric vehicle, as well as the various types of energy dissipated. Secondly, the article examines the energy recovery technologies most frequently used in vehicles, categorizing them according to the type of energy and application. Finally, it determines that with further research and development, energy harvesting holds considerable potential for improving the energy efficiency of electric vehicles. New and innovative methods for capturing and utilizing wasted energy in electric vehicles can be established. The potential benefits of applying energy recovery systems in electric vehicles is a vital issue for the automobile industry to focus on due to the potential benefits involved. The ongoing progress currently being made in this field is expected to play a significant role in shaping the future of transportation.

In the food industry, Listeria is a standard control microorganism in ready-to-eat food since it may be pathogenic and cause a disease called listeriosis. The objective of the present study was to carry out a challenge test to verify the efficiency of different combinations of natural antimicrobial ingredients, against Listeria monocytogenes, to be used in ready-to-eat foods. Six different formulations of cooked ham were elaborated: a control, and five different formulations. An initial inoculation of 2 log cycles was used in the different products and the growth of Listeria was monitored at different temperatures and times (4° C for 17 w; 7ºC for 12 w). Control samples showed a progressive growth, reaching 5-6 log after 3 or 4 weeks. The rest of samples showed constant counts of Listeria during the all study. Only samples containing: 100 ppm nitrite + 250 PPM ascorbic acid+0,7% PRS DV-5 did not control the growth of Listeria at 7 ° C after 7 w of storage. The results obtained allowed to classified the cooked ham elaborated using any natural ingredients combinations as a “Ready-to-eat food unable to support the growth of L. monocytogenes other than those intended for infants and for special medical purposes”.

Growing energy demand in the distributed energy system (DES) besides new charging loads of electric vehicles (EVs) make DES infrastructure unavailable earlier than normal projections. DES lines need to be upgraded to carry the modern demand of customers. DES line upgrade (LU) cost minimized and deferred to the next years by using energy storage system (ESS). ESS offers the opportunity to use energy flexibly in the distribution grid. It is possible to use ESS to shift the inevitable upgrade costs of the distribution grid elements and increase the power quality of the distribution grid. In this study, a method is proposed to extend the lifespan of DES with ESS and reduce line upgrade and investment costs in the distribution system. For this purpose, the IEEE 33 bus test grid is used, and the proposed method is tested and analyzed with different case studies. According to the results, the proposed method can reduce the investment cost by up to 80%. Besides, ESS usage considering load increase and line conditions of the distribution grid, upgrade costs of distribution grid are shifted, resulting in an optimal dimensioning and positioning while extending the lifespan of the distribution grid elements and, at the same time, offering significant improvements in energy quality. Additionally, it is seen that the power losses of the distribution grid are reduced up to 26%, and the voltage profile of buses is improved with the usage of ESS.

From the aerial parts of Salvia ballotiflora, eleven diterpenoids were isolated, among them, four icetexanes, and one abietane (1–5), which are first reported. Their structures were established by spectroscopic means, mainly ¹H and ¹³C NMR, including 1D and 2D homo- and hetero-nuclear experiments. Most of the isolated diterpenoids were tested for their antiproliferative, anti-inflammatory, and radical scavenging activities using the sulforhodamine B assay on six cancer cell lines, the TPA induced ear edema test in mice, and the reduction of the DPPH assay, respectively. Some diterpenoids showed anti-proliferative activity, these being icetexanes 6 and 3, which were the most active with IC₅₀ (µM) = 0.27 ± 0.08 and 1.40 ± 0.03, respectively, for U251 (human glioblastoma) and IC₅₀ (µM) = 0.0.46 ± 0.05, and 0.82 ± 0.06 for SKLU-1 (human lung adenocarcinoma), when compared with adriamycin (IC₅₀ (µM) = 0.08 ± 0.003, and 0.05 ± 0.003, as the positive control, respectively. Compounds 3 and 10 showed significant reduction of the induced ear edema of 37.4 ± 2.8 and 25.4 ± 3.0% (at 1.0 µmol/ear), respectively. Compound 4 was the sole active diterpenoid in the antioxidant assay (IC₅₀ = 98. 4 ± 3.3), using α-tocopherol as positive control, IC₅₀ (µM) = 31.7 ± 1.04. The diterpenoid profile found is of chemotaxonomic relevance and reinforces the evolutionary link of S. ballotiflora with other members of the section Tomentellae.

The global agricultural sector is increasingly pressured to adopt sustainable practices and reduce its environmental impact. In this context, greenhouses play a crucial role in enabling year-round crop production, ensuring food security, and minimizing reliance on traditional open-field farming. However, the energy consumption associated with greenhouse operations poses a significant challenge to achieving sustainability goals. As a result, there is a growing emphasis on transitioning greenhouses towards near-zero energy consumption. Near-zero energy consumption in greenhouses refers to the ambitious objective of minimizing energy usage to the greatest extent possible while maintaining optimal growing conditions for crops. This goal encompasses reducing energy consumption for heating, cooling, lighting, and other operational needs, as well as exploring renewable energy sources to power greenhouse operations. This review article offers a comprehensive overview of greenhouse energy consumption, with the main goal of analyzing the present situation, identifying key challenges, exploring potential opportunities, and proposing future perspectives for decreasing energy usage in greenhouse environments. As the focus on sustainable agricultural practices grows, the need to reduce energy consumption in greenhouses becomes increasingly important. The review critically examines current technological models and strategies applied in smart greenhouse applications, as well as the monitoring of microclimatic conditions inside the greenhouse, encompassing factors such as temperature, humidity, CO2 levels, soil quality, and crop cultivation. Moreover, it aims to present existing literature that investigates the advancement of greenhouses toward achieving significant reductions in energy consumption.

This paper presents a mathematical modeling approach utilizing a fuzzy modeling framework for fixed wing aircraft systems with the goal of creating a highly desirable mathematical representation for model-based control design applications. The starting point is a mathematical model comprised of fifteen non-linear ordinary differential equations representing the dynamic and kinematic behavior applicable to a wide range of fixed wing aircraft systems. Here the proposed mathematical modeling framework is applied to the AIRBUS A310 model developed by ONERA. The proposed fuzzy modeling framework takes advantage of sector non-linearity techniquesto recast all the non-linear terms from the original model to a set of combined fuzzy rules. The result of this fuzzification is a more suitable mathematical description from the control system design point of view. Therefore, the combination of this fuzzy model and the wide range of control techniques available in the literature for such kind of models will enable us to avoid common control design methods, such as gain scheduling, where stability issues can be extremely challenging.

Nollywood, based on the idea of Bollywood from India, is a series of outstanding movies that originate from Nigeria. Unfortunately, while the movies are in English, they are hard to understand for many native speakers due to the dialect of English that is spoken. In this article, we accomplish two goals: (1) create a phonetic sub-title model that is able to translate Nigerian English speech to American English and (2) use the most advanced toxicity detectors to discover how toxic the speech is. Our aim is to highlight the text in these videos which is often times ignored for lack of dialectal understanding due the fact that many people in Nigeria speak a native language like Hausa at home.

Although Sugarcane bagasse ash (SCBA) has good cementitious property, previous researchers have primarily aimed to improve the mechanical performance of conventional concrete or cement-based composites. Research is lacking on ultra-high performance concrete (UHPC), especially regarding tensile self-sensing properties. This paper aimed to comprehensively evaluate the SCBA effect on the UHPC’s mechanical, electrical, and tensile self-sensing properties. The results showed that SCBA below the critical incorporation concentration (CIC) improved the UHPC’s mechanical properties compared to steel fibers alone. Furthermore, adding 3.0wt% SCBA remarkably enhanced the UHPC mechanical properties where the compressive, flexural, and tensile strengths increased by 13.1%, 17.4%, and 20.6%, respectively. The SCBA content of 0.3wt% achieved the maximum UHPC electrical resistivity since values smaller or greater than this content decreased the resistivity. The SCBA-enhanced UHPC showed better tensile stress-sensing performance than UHPC without SCBA due to improved linearity and reversibility, lower hysteresis, higher sensitivity, and superior repeatability. UHPC with 0.3wt% SCBA achieved the best linearity, while UHPC with 0.9wt% SCBA showed the highest sensitivity, lowest hysteresis, and best repeatability. Overall, the content of 0.9wt% SCBA is the best in improving the overall mechanical, electrical, and tensile self-sensing performance.

Offshore electricity production, mainly by wind turbines, and eventually floating PV in the future, will contribute to increase renewable energy production, as well as their dispatchability. The need for that energy evacuation and the implementation of the hydrogen economy are challenges that arise the evaluation of such energy facilities for the direct production of hydrogen. The analysis of the alternatives for the evacuation of offshore renewable electricity for the production of hydrogen is presented. The analysis includes discussion about the current state of the art of hydrogen pipelines and subsea cables, as well as the storage and bunkering system that is needed on shore. The main options for energy evacuation will be via an electric subsea cable to produce hydrogen onshore, or by pipeline, depending on the capacity of the offshore plant. For low capacity, an electric subsea cable is the best option. For high capacity renewable offshore plants, pipelines start to be competitive for distances above aprox. 450 miles.

Polyurethanes are materials with a strong structure-property relationship. The goal of this research was to study the effect of a polyol blend composition of polyurethanes on its properties using a mixture design and setting mathematic models for each property. Water absorption, hydrolytic degradation, contact angle, tensile stretch, hardness and modulus were studied. Additionally, Thermal stability was studied by thermogravimetric analysis. Area under the curve was used to evaluate the effect of polyol blend composition on thermal stability and kinetics of water absorption and hydrolytic degradation. Least squares were used to calculate the regression coefficients. Models for the properties were significant, and lack of fit was not (P<0.05). Fit statistics suggest both good fitting and prediction. Water absorption, hydrolytic degradation and contact angle were mediated by the hydrophilic nature of the polyols. Tensile strength, modulus and hardness could be regulated by the molecular weight and hydroxyl index of the polyols. Regression of DTG curves from thermal analysis showed improvement of thermal stability with the increase of PCL and PE. An ANOVA test of the model terms demonstrated that three component effects on bulk properties like water absorption, hydrolytic degradation, hardness, tensile strength and modulus, and the PEG*PCL interaction with the contact angle, which is a surface property. Mixture design application allowed for an understanding of the structure-property relationship through mathematic models.

Vaccination is the most promising approach for ending or containing the SARS-CoV2 pandemic. However, serious post-COVID vaccine reactions including immunocytopenia (ITP) syndrome has been increasingly reported. Several factors cause increased risks including multiple doses, age-dependent heterogeneity in immune-responses, platelet cross-reactions with microbial components, and Long-COVID syndrome. Thus, in the absence of a widely available specific therapeutics, vigilance is important while more studies are imperative. Using a structured questionnaire sent to different regions in Saudi Arabia, we conducted a comprehensive investigation on the frequency, rates, disease patterns, and patient demographics of post-COVID-19 side effects on febrile patients after three major vaccines. Results indicated the majority administered Pfizer BioNtech vaccine (81%, n=809); followed by AstraZeneca (16%, n=155); and Moderna (3%, n=34). In overall 998 participants, 74% (n=737) had no serious symptoms; however, 26.2% (n=261) revealed typical syndrome. In a focused group of 722, shortness of breath (20%), bruises or bleeding (18%), inattention (18%), GIT symptoms (17.6%), skin irritation (8.6%), and anosmia and ageusia (8%) were the most prominent. The onset time was mostly in 1-3 days in 49% (n=128), followed by 4-7 days in 21.8% (n=57), 8-14 days in 16.5% (n=43), and more than a month in 12.6% (n=33). The onsets occurred mostly after the first, second, or both doses 9%, 10%, and 7%, respectively. The frequency of symptoms was significantly higher among after Moderna ® vaccine (P-value = 0.00006) and it was significantly lower in participants who received Pfizer (P-value 0.00231). We did not find significant difference in symptoms related to differences in regions. Similarly, the region, age, gender, education, and nationality had no influence in the dose and onset timings. The findings of this study have significant clinical implications in disease management strategies, preventive measures, and vaccine development. Future vertical studies would reveal more insights into the mechanisms of post-COVID vaccine syndrome.

Recently, the application of Artificial Intelligence (AI) in many areas of life has allowed raising the efficiency of systems and converting them into smart ones, especially in the field of energy. Integrating AI with power systems allows electrical grids to be smart enough to predict the future load, which is known as Intelligent Load Forecasting (ILF). Hence, suitable decisions for power system planning and operation procedures can be taken accordingly. Moreover, ILF can play a vital role in electrical demand response, which guarantees a reliable transitioning of power systems. This paper introduces a Perfect Load Forecasting Strategy (PLFS) for predicting future load in smart electrical grids based on AI techniques. The proposed PLFS consists of two sequential phases, which are; Data Preprocessing Phase (DPP) and Load Forecasting Phase (LFP). In the former phase, input electrical load dataset is prepared before the actual forecasting takes place through two essential tasks, namely feature selection and outlier rejection. Feature selec-tion is done using Advanced Leopard Seal Optimization (ALSO) as a new natural inspired opti-mization technique, Citation: To be added by editorial staff during production. Academic Editor: Firstname Last-name Received: date Revised: date Accepted: date Published: date Copyright: © 2023 by the authors. Submitted for possible open access publication under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). While outlier rejection is accomplished through Interquartile Range (IQR) as a measure of statis-tical dispersion. On the other hand, actual load forecasting takes place in LFP using a new pre-dictor called; Weighted K-Nearest Neighbor (WKNN) algorithm. The proposed PLFS has been tested through excessive experiments. Results have shown that PLFS outperforms recent load forecasting techniques as it introduces the maximum prediction accuracy with the minimum root mean square error.

Framed in a context with an emerging economy and with a high percentage of school failure, this study aimed to identify the factors that turn students with socioeconomic disadvantages into resilient students. Two questions guided the research: Can resilience be supported in students in adverse socioeconomic situations? What factors influence building resilient students? A cross-sectional study was carried out from 2011 to 2015 in Chile, using a multilevel logistic regression model with three levels, considering the hierarchical data structure. The behavior of 63100 to 76400 sampled students was analyzed. Results show five relevant factors in building resilience: self-efficacy in language, minor aggressions and violence perceived by students, norms and values of the establishment, interest in study, and self-efficacy. Some risk factors identified were an atmosphere of less respect and trust, engagement in physical education activities and good performance in carrying them out. These results could orient educational leaders interested in supporting the educational community in order to improve the academic success of disadvantaged students.

The Human Gut Microbiome is an important host’s component defining its health. These microorganisms are mutualistic symbionts dependent on factors such as host’s age, subsistence models and sociocultural practices, among others. The conjunction of these factors define the microbial ecosystem dynamics. Using a fecal microbiome approach in children, a comparison of two Mexican communities with contrasting lifestyles: “westernized” (Mexico City) and “non-westernized” (Me’phaa indigenous group) was evaluated. The main differences between these two communities are in bacteria associated with different types of diets (high animal protein and refined sugars vs high fiber food, respectively). In addition, the gut microbiome of Me’phaa children showed higher total diversity and the presence of exclusive phyla, such as Deinococcus-Thermus, Chloroflexi, Elusimicrobia, Acidobacteria and Fibrobacteres. In contrast, Mexico City children had less diversity and the exclusive presence of Saccharibacteria phylum which is associated with the degradation of sugar compounds. This comparison allows further exploration of the selective pressures affecting microbial ecosystemic composition over the course of human evolution and the potential consequences of pathophysiological states correlated with westernization lifestyles.

This paper proposes a curved link-slab (CLS) structure, simplified into a hingeless-arch model, to address the current cracking phenomenon of CLS concrete. The stress formula of the hingeless arch under various loads is derived based on the classical mechanic's method. Based on an actual bridge example, the mechanical properties of CLS are analyzed under different loads and load combinations. The results show that: (1) the CLS stress is significantly lower than that of the flat link-slab structure (FLS), (2) its stress values are less than the concrete tensile limit, and (3) the CLS can effectively solve the concrete cracking phenomenon on the link-slab. The rationality of the stress formula derived from the simplified model of the hingeless arch is verified using the finite element method (FEM). The parametric sensitivity analysis shows that variation of the reinforcement ratio of the CLS has a limited impact on it. Considering both the concrete tensile and compressive limit, the thickness of the CLS should be 15 cm to 20 cm, and its design span should be about 5% to7.5% of the main beam length.

Here, we present a staged approach for an innovative repurposing of a portable infant humidicrib into a live cell growth, observation, and imaging system. Furthmore, humidicrib can support different variations of “umbilical” bioreactors, and can be used to conduct electrophysiology experiments and in situ immunohistochemistry. Modifications incorporate a closed loop carbon dioxide (CO₂) concentration control system with umbilical CO₂ and heating support for tailored bioreactors. The repurposing cost is inexpensive and allows for the continued observation and imaging of cells. This prototype unit has been used to continuously observe and image live primary neurons for up to 21 days. This demonstrates the repurposed units’ suitability for use in tissue culture based research, particularly where modifications to microscopes are required or where sensitive manipulation outside of a standard incubator is needed.

This communication reports an improvement of the quality of the electrical data obtained from the application of electrical resistivity tomography method on archaeological studies. The electrical contact between ground and electrode enhances significantly by using carbomer-based gel during the electrical resistivity tomography measurements. Not only does the gel promote the conservation of the building surface under investigation, but it also virtually eliminates the necessity of conventional spike electrodes, which in many archaeological studies are inadequate or not permitted. Results evidenced an enhancement in the quality of the electrical data obtained in the order of thousands of units compared with those without using the carbomer-based gel. The potential and capabilities of this affordable gel make it appropriate to be applied to other geoelectrical studies beyond archaeological investigations. Moreover, it might solve corrosion issues on conventional spike electrodes, and electrical multicore cables usually provoked for added saltwater attempting to improve the electrical contact.

The Anthropocene epoch marks a critical phase in the history of humanity, where anthropogenic activities have significantly impacted our planet. Along the unpreceedendent ecological crises, the Anthropocene worldview has raised existential questions with a cultural and ethical discourse that recognises intrinsic value and calls for more responsible sustainable living. To address these challenges collectively, a broader perspective is required, guided by a unified sense of purpose towards personal and planetary health. In this context, the role of religious leaders in shaping the social and environmental worldviews of their followers cannot be underestimated. Religious teachings provide a moral framework for promoting climate action, global ethics, indigenous people, peace, and justice, and many other aspects of planetary health. By assessing the global ecological crises through the lens of Islam; Religion of Nature, or Din al-Fitra, and its environmental teachings across all realms, we can gain insights into humanity’s connection to the fabric of creation and its interaction with this world. These value-leden principles are integrated with accountability; thus, the role of Muslim religious leaders considering the planetary-scale threats warrant further elucidation; recognizing that many other faiths and faith leaders can similarly contribute together for common good.

Rapid isolation of white blood cells (WBCs) from whole blood is an essential part of any WBC examination platform. However, most conventional cell separation techniques are labor-intensive and low throughput, require large volumes of samples, need extensive cell manipulation, and have low purity. To address these challenges, we report the design and fabrication of a passive, label-free microfluidic device with a unique U-shaped cross-section to separate WBCs from whole blood using hydrodynamic forces that exist in a microchannel with curvilinear geometry. It is shown that the spiral microchannel with a U-shaped cross-section concentrates larger blood cells (e.g., WBCs) in the inner cross-section of the microchannel by moving smaller blood cells (e.g., red blood cells (RBCs) and platelets) to the outer microchannel section and preventing them from returning to the inner microchannel section. Therefore, it overcomes the major limitation of a rectangular cross-section where secondary Dean vortices constantly enforce particles throughout the entire cross-section and decrease its isolation efficiency. Under optimal settings, more than 95% of WBCs can be isolated from whole blood under high-throughput (6 ml/min), high-purity (88%), and high-capacity (180 ml of sample in 1 hour) conditions. High efficiency, fast processing time, and non-invasive WBC isolation from large blood samples without centrifugation, RBC lysis, cell biomarkers, and chemical pre-treatments make this method an ideal choice for downstream cell study platforms.

Aim: In individuals with COVID-19, the study assessed the relationship between cytokine expression and pulmonary dysfunction. These correlations may help to suggest strategies for prevention and therapies of coronavirus disease outbreak. Patients and methods: 50 healthy participants and 100 COVID-19 patients participated in this study. COVID-19 participants were subdivided into moderate and severe groups based on the severity of their symptoms. In both patients and controls, measurements of white blood cells (WBCs), lymphocytes, C-reactive protein (CRP), interleukin (IL)-1, IL-4, IL-6, IL-18, and IL-35 were estimated. All the patients performed chest CT and CO-RADS score was assessed. Results: All patients had increased WBCs count and CRP, IL-1, IL-4, IL-6, IL-18, and IL-35 levels than healthy controls. While WBCs, CRP, and cytokines like IL-1β and IL-6 showed significantly higher levels in the severe group as compared to moderate patients, IL-4, IL-35, and IL-18 showed comparable levels in both disease groups. Furthermore, CO-RADS score was positively connected with WBCs, CRP, and cytokine levels (IL-35, IL-18, IL-6, IL-4 and IL-1β) in both groups, and lymphocyte levels in all patient groups considerably decreased as compared to the controls. CO-RADS score, also demonstrated a positive correlation with lymphocytes in the moderate COVID-19 patients, whereas in the severe patients, it demonstrated a negative correlation with lymphocytes. Conclusion: Severe COVID-19 patients, compared to individuals with moderate illness and healthy controls, patients had lower lymphocyte counts and increased CRP with greater WBCs counts. In contrast to moderate COVID-19 patients, severe COVID-19 patients had higher levels of IL-1β and IL-6, but IL-4, IL-18, and IL-35 between both illness categories at close levels. CO-RADS 5 was the most frequent category in both moderate and severe cases. Patients with a typical CO-RADS involvement had a higher CRP and white blood cell count with a lower lymphocyte count than the others. Cytokine levels were considered a surrogate markers of severe lung affection in COVID 19 patients.

In this study, our goal was to research land-use change by combining spatio–temporal land use/land cover monitoring (LULC (1989–2019) and urban growth modeling (1999–2039) in Benslimane, Morocco, to determine the effect of urban growth on different groups based on cellular automata (CA) and geospatial methods. A further goal was to test the reliability of the AC algorithm for urban expansion modeling. To do this, four years of satellite data were used at the same time as population density, downtown distance, slope, and ground road distance. The LULC satellite reported a rise of 3.8 km2 (318% variation) during 1989–2019. Spatial transformation analysis reveals a good classification similarity ranging from 89% to 91% with the main component analysis (PCA) technique. The statistical accuracy between the satellite scale and the replicated built region of 2019 gave 97.23 %t of the confusion matrix overall accuracy, and the region under the receiver operational characteristics (ROC) curve to 0.94, suggesting the model's high accuracy. Although the constructed area remains low relative to the total area of the municipality's territory, the LULC project shows that the urban area will extend to 5,044 km2 in 2019, principally in the western and southwestern sections. In 2019–2039, urban development is expected to lead to a transformation of the other class (loss of 1,364 km2), followed by vegetation cover (loss of 0.345 km2). In spatial modeling and statistical calculations, the GDAL and NumPy Python 3.8 libraries were successful.

Background: PD1 and its ligand PD-L1 are related to the prognosis in many solid tumors, whether its role in oral squamous cell carcinoma (OSCC) remains unclear. Methods: Retrospective monocentric study including all patients with OSCC diagnosed and treated between 01/2020 and 05/2022. PD-L1 expression was assessed by combined positive score (CPS), considering CPS > or equal to 1 as positive (1-20 “low expression”, and ≥20 “high”). Descriptive analysis of patient cohort and tumors was performed, including tumor size, stage, lymph node involvement, recur-rence and survival. Results: 65 patients (65 tumors) were analyzed. 66.15% of tumors were ad-vanced stages (III-IV), of them, 97.67% PD-L1+ versus 71.42% within early stages (I-II). T4 tumors expressed PD-L1 in 100% of cases, compared with 54’54% in T1 tumors. 50.79 % of tumors showed lymph node involvement (pN+), 100% of them showing PD-L1+. Prevalence of pN+ was 59.38% for PD-L1 high expression versus 40.63% for low expression. Patients' follow-up ranged from 2 to 34.5 months. No significant difference was seen between overall survival (OS) and PD-L1 +/- (CPS ≥1 vs CPS <1) neither PD-L1 high (CPS ≥20) vs low CPS <20) (p 0.97 and 0.64, re-spectively). Conclusions: The method used to measure (laboratory test with Dako 22C3 an-ti-PD-L1 primary antibody) PD-L1 was reliable and accurate, with a correlation coefficient be-tween the PD-L1 expression in the biopsy and surgical piece of 0.83 (p 0.0001). CPS≥1 was ob-served in large tumors (p<0.001), and was correlated with of lymph node metastases (p<0.004). Further analysis of PD-L1 expression and its relevance in tumor biology and prognosis is needed.

Introduction: Periodontitis is a severe oral infection that can contribute to systemic inflammation. A large body of evidence suggests a role for systemic inflammation in the initiation of neurodegenerative disease. This systematic review synthesized data from observational studies to investigate the association between periodontitis and neuroinflammation in adults. Methods and materials: A systematic literature search of PubMed, Web of Science, and Cumulative Index to Nursing and Allied Health Literature (CINAHL) was performed for studies published from the date of inception up to September 2021. Search terms for the exposure “oral disease” and outcome “dementia”, “neuroinflammation” and “cognitive decline” were used. Study selection and data extraction were independently undertaken by two reviewers. The final eligible articles were included only if the exposure is periodontitis and the outcome is cognitive impairment or dementia or a topic related to this condition, and if the study was conducted in an adult population. The quality and risk of bias were assessed by Newcastle Ottawa Scale (NOS). Qualitative synthesis was used to narratively synthesize the results. Six cohort studies, three cross-sectional studies, and two case-control studies met the inclusion criteria. These eleven studies were only narratively synthesized. Meta-analysis was not performed due to the methodological heterogeneity of the studies. Results: All the included studies show evidence of an association between periodontitis and cognitive im-pairment or dementia and Alzheimer’s disease pathology. Conclusion: Nonetheless, the mechanisms responsible for the association between periodontitis and dementia are still unclear.

The natural products and conventional chemotherapeutic drugs are believed to increase the cure rates of anti-cancer treatment while reducing their toxicity. The current study investigates the cytotoxic and apoptogenic effects of bioactive compounds from Monotheca buxifolia on Hep G2 cell lines. The effect on the viability of Hep G2 cells was evaluated by MTT assay; Morphological changes were studied, the apoptotic activity was demonstrated through Annexin-V-FITC/ PI, a molecular dynamics simulation study was conducted to explore the binding pattern of the compounds in the active site of the PPRAδ protein. The isolated compounds lauric acid, oleanolic acid, and bis(2-ethylhexyl) phthalate inhibited the growth of hepatocellular cancer cells, as determined by MTT assay and annexin V-FITC/PI. The IC50 value for lauric acid was 56.4584 ± 1.20 µg/ml, that for oleanolic acid was 31.9421 ± 1.03 µg/ml, and that for bis(2-ethylhexyl) phthalate was 83.8019 ± 2.18 µg/ml. After 24 h of treatment, 29.5% of Hep G2 cells treated with lauric acid, 52.1% of those treated with oleanolic acid, and 22.4% of those treated with bis(2-ethylhexyl) phthalate were apoptotic. Morphological assay and Hoechst staining microscopy revealed the morphological alterations of cell membrane accompanied by nuclear condensation after treatment. The high fluctuation indicates the high potency and adopting various interactions, and vice versa, the oleanolic acid showed highly residues fluctuation, which remains stable in the active site of PPARδ protein and involved in various interactions while remaining locally fluctuated in the binding site the other two compounds. In conclusion, a significant apoptogenic effect was exhibited by lauric acid, oleanolic acid, and bis(2-ethylhexyl) phthalate against HepG2 cells in inducing apoptosis. Our findings indicate that these bioactive compounds hold promise as potential therapeutic for hepatocellular carcinoma.

Introduction: Hospitalization in a COVID-19 unit represents a significant source of stress and psychological distress for patients. Our study aims to determine the factors of psychological distress in the therapeutic and psychosocial management of patients hospitalized with a COVID-19 infection. Methods: This cross-sectional study was carried out over 8 months at the COVID-19 zone of the CHU HASSAN II of FES. 99 patients were evaluated within days of diagnosis by psychometric scales of anxiety, depression, and post-traumatic stress. In the course of this follow-up, we found the presence of psychological impacts in these patients, and we tried to find correlating factors between the occurrence of psychiatric disorders and the set of factors related to sociodemographic data, hospitalization course and treatments taken, as well as family support. Results: 35% of patients had scores in favor of post-traumatic stress disorder, 37% of the patients had definite depression and 50% had anxiety. Post-traumatic stress, depression, and anxiety were correlated with sociodemographic factors, hospitalization, treatments received, and length of stay. Conclusion: The prevalence of anxiety-depressive disorders and post-traumatic stress disorder was high in patients with COVID-19, hence the interest in providing psychological and psychosocial care in the emergency department.

Background: Sodium intake has been related to several adverse health outcomes; such as, hypertension, and cardiovascular diseases. Processed foods are major contributors to the population’s dietary sodium intake. The aim of the present study was to determine sodium levels in Mexican packaged foods; also to evaluate the proportion of foods that comply with sodium benchmark targets set by the UK Food Standards Agency (UK FSA) and those set by the Mexican Commission for the Protection of Health Risks (COFEPRIS). We also evaluated the proportion of foods that exceeded the Pan American Health Organization (PAHO) targets. Methods: This was a cross-sectional study that comprised data collected from the package of 2,248 processed foods from selected supermarkets of Mexico. Results: Many processed food categories contained excessive amount of sodium, being the processed meats (ham, bacon and sausages) those that have the highest concentrations. The proportion of foods classified as compliant in our sample was lower for international targets (FSA UK and PAHO) compared to the Mexican COFEPRIS criteria. Conclusions: These data provide a critical baseline assessment for monitoring sodium levels in Mexican processed foods.

This study identified high-risk locations (hotspots), using geographic information systems (GIS) and spatial analysis. Five years of accident data (2013-2017) for the Lokoja-Abuja-Kaduna highway in Nigeria were used. Accident concentration analysis was carried out using the mean center analysis and Kernel density estimation method. These locations were further verified using Moran’s I Statistics (Spatial Autocorrelation) to determine their clustering with statistical significance. Fishnet polygon and Network spatial weight matrix approaches of Getis-Ord Gi* statistic for hotspot analysis were used for the hotspot analysis. Hotspots exist for 2013, 2014, and 2017 with a significance level between 95% - 99%. However, no hotspots exist for 2014 and 2015 since the pattern is random. The spatial autocorrelation analysis of the overall accident locations with a z-score = 0.0575, p-value = 0.9542, and Moran's I statistic = -0.0089 showed that the distribution of accidents on the study route is random. Thus, preventive measures for hotspot locations should be based on a yearly hotspot analysis. The average daily traffic values of 31,270 and 16,303 were obtained for the Northbound and Southbound directions of the Abaji-Abuja section. The results show that hotspot locations with high confidence levels are at points where there are geometric features.

Purpose: To assess the clinical safety and possible effectiveness of Vasoactive Intestinal Peptide in the treatment of Acute Respiratory Distress Syndrome (ARDS) related to sepsis. Methods: Under FDA Investigational New Drug clearance, 8 patients with ARDS related to sepsis were treated with 50 pmole/kg/hr – 100 pmole/kg/hr of Vasoactive Intestinal Peptide by intravenous infusion for 12 hours. All patients were on mechanical ventilation and full telemetery. Results: No drug-related serious adverse events were seen. Hypotension was seen in association with two infusions and diarrhea in association with one, but did not necessitate cessation of therapy. Bigeminy was seen in association with one infusion without sequelae. Seven of eight patients demonstrated a successful course during intensive care and were successfully removed from mechanical ventilation and discharged from intensive care. The eighth patient succumbed to purulent secretions in the lungs. Of those who were discharged from the ICU, six demonstrated successful 30 day survival. The seventh died from a cerebral infract at day 30, deemed unrelated to treatment with VIP. Serum levels of Tumor Necrosis Factor α were obtained in 6 patients at baseline and 24 hours and were seen to decrease with treatment in five patients. Conclusions: Initial clinical results of treatment with VIP in patients with ARDS demonstrated a safety profile consistent with previous studies in normal volunteers. The successful clinical course seen in 7 of 8 patients in the setting of an expected 50% survival may suggest that VIP shows promise in the treatment of other infectious conditions that damage the pulmonary epithelium, particularly COVID-19.

As the rate of discovery of new antibacterial compounds towards multidrug resistant bacteria is declining, there is an urge for the search of molecules that could revert this tendency. Acinetobacter baumannii has emerged as a highly virulent Gram-negative bacterium that has acquired multiple mechanisms against antibiotics and is considered of critical priority. In this work we developed a quantitative structure-property relationship (QSPR) model with 592 compounds for the identification of structural parameters related to their property as antibacterial agents against A. baumannii. QSPR mathematical validation (R2 = 70.27, RN = -0.008, aR2 = 0.014 and δK = 0.021) and its prediction ability (Q2LMO= 67.89, Q2EXT = 67.75, a(Q2)= -0.068, δQ = 0.0, rm2 = 0.229, and ∆rm2 = 0.522) were obtained with different statistical parameters; additional validation jobs were done using three sets of external molecules (R2 = 72.89, 71.64 and 71.56). We used the QSPR model to perform a virtual screening on the BIOFACQUIM natural product database. From this screening our model showed that molecules 32 to 35 and 54 to 68, isolated from different extracts of plants of the Ipomoea sp., are potential antibacterial against A. baumannii. Furthermore, biological assays showed that molecules 56 and 60 to 64 have a wide antibacterial activity against clinical isolated strains of A. baumannii, as well as other multidrug resistant bacteria including Staphylococcus aureus, Escherichia coli, Klebsiella pneumonia, and Pseudomonas aeruginosa. Finally, we propose 60 as a potential lead compound due to its broad-spectrum activity and its structural simplicity. Therefore, our QSPR model can be used as a tool for the investigation and search of new antibacterial compounds against A. baumannii.

Population studies have demonstrated an association between sodium (Na) and po-tassium (K) intake and levels of blood pressure (BP) and cholesterol. The aim of this study was to describe the dietary intake and distribution of Na and K in Mexicans, and their as-sociation with metabolic risk outcomes. We analyzed a national survey that included 4,219 participants. Dietary information was obtained through a 24-hour recall. Foods and beverages were classified based on the degree of processing. BP and biomarkers in blood and urine were measured. The mean intake (mg/d) of Na was 1512 in pre-schoolchildren, 2844 in schoolchildren, 3743 in adolescents, and 3132 in adults. The mean intake of K was 1616 in pre-schoolchildren, 2256 in schoolchildren, 2967 in adolescents, and 3401 in adults. Processed and ultra-processed foods (UPF) contribute to sodium intake: 49% in preschool and schoolchildren, 47% in adolescents, and 39% in adults. Adults in the fourth quartile of sodium intake had lower serum concentrations of cholesterol (181.4 mg/dL) and HDL-c (35.5 mg/dL). The Mexican population has high Na and low K intakes. There is a relationship between Na sodium consumption and cholesterol, and LDL levels. UPF contributes to almost 40% of the sodium consumed by Mexicans.

Background Main treatment modality for spinal meningiomas (SM) is gross total resection (GTR). However, optimal timing of surgery, especially in cases with absent or mild neurological symptoms remains unclear. The aim of this study is to assess the impact of early-stage resection on neurological outcome, quality of life (QoL) and quality of care. The primary objective was a favorable neurological outcome (McCormick scale 1); Methods: We retrospectively analyzed data from patients operated on SM between 2011 and 2021. Patients with mild neurological symptoms preoperatively (McCormick scale 1 and 2) were compared to those with more severe neurological symptoms (McCormick scale 3-5). Disabilities and QoL were assessed according to validated questionnaires (SF36, ODI, NDI). Results: Age, spinal cord edema, thoracic localization, and spinal canal occupancy ratio were associated with more severe neurological symptoms (all p<.05). Patients presented with mild symptoms were associated with favorable neurological outcome (OR: 14.778 (95%CI 3.918-55.746, p<.001), which is associated with shorter hospitalization, better QoL and less disabilities (p<.05). Quality of care was comparable in both cohorts; Conclusions: Early surgical intervention of SM, before the development of severe neurological deficits, should be considered as it is associated with a favorable neurological outcome and quality of life.

The European Commission has been striving to achieve sustainable development in its rural areas for more than 25 years through funds aimed at modernizing the agricultural and forestry sectors, protecting the environment and improving the quality of life. But is sustainable rural development really being accomplished? This study sets out to answer this question in the case of Extremadura, a Spanish territory with Low Demographic Density and a Gross Domestic Product still below 75 % of the European average. Both qualitative and quantitative methodology have been employed, using a Principal Component Analysis the result of which has provided us with a model which shows how various behaviors coexist in the region in view of the distribution of current funding from the EAFRD. The most dynamic areas have received the largest amounts of funding and these are linked to the agricultural sector and to the protection of the environment, leaving aside the more depressed areas and the implementation of the LEADER Approach as well. Therefore, we have come to the conclusion that the current rural development in Extremadura is not sustainable enough.

Natural risks encompass a range of disasters and dangers, requiring comprehensive management through assessments, anticipations, and advanced alert systems. Our specific focus is on landslides in challenging terrains. The evaluation of landslide risks employs sophisticated multicriteria models, such as the weighted sum approach, integrating qualitative parameters. Despite the challenges of the rugged terrain in Northern Algeria, it paradoxically hosts a dense population attracted by valuable hydro-agricultural resources. Our research is dedicated to studying landslide risks in these areas, particularly in the Mila region, with the aim of constructing a statistical model integrating considerations of both danger and vulnerability. This complex process identifies threats and their determining factors, including geomorphology and socio-economic conditions. The result is a valuable tool for effective risk management, strengthening safety and resilience against natural disasters. By understanding the intricate interplay of geological, environmental, and social elements, our research can contribute to the development of targeted interventions, fostering a more resilient community in the face of natural adversities.

Different nematodes affect canines, however, Dirofilaria immitis is the most prevalent filariae. D. immitis causes heartworm disease that can be fatal for dogs and potentially transmitted to humans. Climate change, animal migration, among other factors have changed the dynamics of vector-borne diseases, including filariasis. In the last four years, a sudden increase of dogs with microfilaremia was reported by different veterinary centers in Cali, the main city of Southwest Colombia. The objective of this study was to molecularly identify the etiologic agent of this filariasis outbreak reported in this area from 2018-2019, using a novel PCR–RFLP method. Those filariasis cases were initially detected by microscopic and serological tests. A total of 82 canine filariasis cases were molecularly analyzed, identifying 55 (67%) of them as Acantacheilonema reconditum. PCR-sequencing was performed in eight cases confirming this finding. The filariasis cases were statistically associated with male dogs who had clinical signs of anemia, with low levels of hemoglobin and hematocrit (p &lt;0.0001), and high levels of plasma proteins (p &lt;0.001). This emerging canine disease constitutes an important public health concern among clinicians and advises active surveillance to explore its zoonotic potential.

Scaffolds are widely used in tissue engineering because their manufacture is based on natural and synthetic polymers, which allows them to have properties such as biocompatibility and biodegradability, creating an ideal environment for cell growth on their surface. In this context, among the polymers studied in Tissue Engineering are Chitosan (CH) and Polyvinyl Alcohol (PVA). CH is a versatile polymer obtained from de-acetylation of chitin, which is used for its high biodegradability and biocompatibility, although its mechanical properties must be improved. It has been found that one of the ways to improve the mechanical properties of CH is to mix it with other synthetic polymers such as PVA. PVA is known for its biocompatibility, biodegradability, zero toxicity and ease of preparation due to its solubility in water and excellent mechanical properties, such as tensile strength and ease in the formation of films and barriers. In this study we evaluated the capacity of scaffolds made with CH and PVA in different concentrations (2: 1, 1: 1, 1: 2, respectively) as a possible application in bone regeneration. This was made through different characterization tests such as Infrared Spectroscopy, AFM, Swelling test and Porosity test, where we obtained information about its structural and physicochemical properties. Additionally, a cellular quality control was performed on the material through the MTT assay. The Fourier transform infrared spectroscopy (FTIR) study showed that there are strong intermolecular hydrogen bonds between the chitosan and polyvinyl alcohol molecules. The Swelling and Porosity tests showed favorable results, obtaining maximum values ​​of 5519% and 72.17% respectively. MTT tests determined that the prepared materials are not cytotoxic. These findings suggest that scaffolds possess properties suitable for use in Tissue Engineering.

Intelligent transportation systems (ITS) have recently evolved rapidly, which requires development of highly trustworthy and effective communication technologies for uses, including vehicle-to-vehicle (V2V) and vehicle-to-everything (V2X) communication; where Orthogonal Frequency Division Multiplexing (OFDM) is regarded as a strong candidate and highly popular option technique among these methods. However, the movement of vehicles introduces Doppler frequencies which produce inter-carrier interference (ICI), that is frequently occurs in V2X channels. This interference has the potential to compromise the integrity of subcarrier orthogonality within OFDM, leading to lower-quality communication and an increased likelihood of data transmission errors. When employing channels with doubly dispersive fading, OFDM necessitates the usage of a complex equalization based on the minimum mean-square error (MMSE) equalizer, which requires channel matrix inversion. Several low-complexity equalizers for OFDM have been developed and are based on band factorization, time domain LSQR (Least-Square QR) iterative computing, and banded minimum mean squared error (BMMSE). This paper proposes Conjugate Gradient Least Squares (CGLS), which is a novel iterative computation algorithm integrated with nonlinear equalizers. The suggested nonlinear equalization technique determines the trade-off between computations and performance. According to simulation data, the suggested nonlinear equalizer performs better than the current BMMSE and linear CGLS algorithms across doubly dispersive fading channels.

Trauma to the spinal cord causes extensive neuronal death contributing to the loss of sensory-motor and autonomic functions below the injury level. Apoptosis affects neurons after spinal cord injury (SCI) and is associated with increased caspase activity. Cleavage of X-linked inhibitor of apoptosis protein (XIAP) after SCI may contribute to this rise of caspase activity. Accordingly, we have shown that the elevation of XIAP resulted in increased neuronal survival after SCI and improved functional recovery. Therefore, we hypothesize that neuronal overexpression of XIAP can be neuroprotective after SCI with improved functional recovery. In line with this, studies of a transgenic mouse with overexpression of XIAP in neurons revealed that higher levels of XIAP after spinal cord trauma favours neuronal survival, tissue preservation, and motor recovery after the spinal cord trauma. Using the human SH-SY5Y cells overexpressing XIAP we show further that XIAP reduced caspase activity and apoptotic cell death after pro-apoptotic stimuli. In conclusion, this study shows that the levels of XIAP expression are an important factor for the outcome after spinal cord trauma and identifies XIAP as an important therapeutic target for alleviating the deleterious effects of SCI.

The domain of construction engineering and management is evolving rapidly. Optimizing resource positioning is crucial for meeting the challenges of efficiency and productivity. This research presents a novel methodology that incorporates Agent-Based Modeling (ABM), Building Information Modeling (BIM), and Bluetooth Low Energy (BLE) technologies, augmented with a Client Early Warning System (CEWS) and a Decision Support System (DSS). What makes this study unique is that it provides a real-time methodology for resource allocation and project management, tailored to address the complexities of modern construction projects. The application of this integrated technological framework marks a significant leap in construction management, empowering data-driven decision-making and significantly improving project efficiency. Empirically validated through a case study at Helwan University's College of Engineering and substantiated by expert surveys, this research showcases a transformative model for resource management. The findings not only underscore the practical applicability of this approach but also open new horizons for its adoption in global construction practices, offering insights for future research endeavors focused on expanding these methodologies to a wider range of resources.

Most recent studies of doxycycline PEP have assessed doxycycline's effect on antimicrobial resistance by measuring the proportion of colonies of the target species with AMR as the outcome measure. In this study, we show that this method is insufficiently sensitive to detect shifts in MIC distribution.

Cercospora beticola Sacc. is an ascomycete pathogen that causes Cercospora leaf spot in sugar beets (Beta vulgaris L.) and other related crops. The disease symptoms are characterized by circular lesions with an ash-gray centre and dark brown to purple margins on the leaves. It can lead to significant yield losses if not effectively managed. This study aims to characterize and assess the impact of bacterial biological control agents against C. beticola. Following a dual-culture screening, 18 bacteria exhibiting over 50% inhibition were selected, with six of them demonstrating more than 80% control. Identification of the bacteria was carried out through sequencing of the16S rDNA, revealing potentially 12 species belonging to six genera including Bacillus which was represented by four species. Additionally, the bacteria underwent in-depth characterization of biochemical and molecular properties, as well as plant-growth promotion. PCR detection of genes responsible for producing antifungal metabolites revealed that 83%, 78%, 89%, and 56% of the selected bacteria possessed the bacillomycin, iturin, fengycin, and surfactin encoding genes, respectively. Infrared spectroscopy analysis confirmed the presence of lipopeptide structure in the bacteria supernatant filtrate. Subsequently, the bacteria were assessed for their effect on sugar beet plants in controlled conditions. The bacteria exhibited notable capabilities, promoting growth in both roots and shoots, resulting in significant increases in root length, weight, and shoot length. The field experiment with four bacterial candidates demonstrated good performance against C. beticola compared to difenoconazole fungicide. These bacteria played a significant role in disease control, achieving a maximum efficacy of 77.42%, slightly below the 88.51% efficacy attained by difenoconazole. Additional field trials are necessary to verify the protective and growth-promoting effects of these candidates, whether applied individually, combined in consortia, or integrated with chemical inputs in sugar beet crop production.

Syndemics theory has been applied to study interactions between biomedical and social factors leading to clustering of diseases. Because syndemics theory focuses on interactions that enhance risk, the concept of vulnerability is central to this approach. We conducted a scoping review to better understand how syndemics theory helped to define, operationalize, and tackle issues of vulnerability during the COVID-19 pandemic. Original research, review, and opinion pieces elaborating on syndemics, vulnerability and COVID-19, published between December 2019 and October 2022 and available in PubMed, were eligible. We analysed 40 records and identified three framings of syndemics operating during this period: (1) interactions between COVID-19, diseases/health conditions and specific social factors; (2) interactions between COVID-19 and social determinants of health; and (3) impacts of COVID-19 on specific populations. Emerging conceptualizations described vulnerability to COVID-19 as a systemic issue; explained the impact of COVID-19 control measures on increased vulnerability; and presented COVID-19 as a syndemic on its own. However, this theory's potential for deepening our understanding of vulnerability during this pandemic was constrained by superficial explorations of the interactions between biomedical and social spheres, and insufficient theoretical and methodological support from the social sciences.

The Peripheral giant cell granuloma (PGCG) is an asymptomatic, non-neoplastic and proliferative lesion of unknown etiology. Some possible pre-disposing factors such as hormonal changes dur-ing pregnancy, have been suggested. However, the association between PGCG and pregnancy is controversial. There are few reported clinical cases of pregnancy-associated PGCG in the litera-ture, and they occurred only in the lower jaw. The present report is on a 35-year-old female pa-tient at 36 weeks of gestation who presented with a PGCG in the central and lateral incisors of the upper jaw. The management consisted of surgical excision, along with curettage of the affected bony walls. The diagnosis was based on clinical results and imaging examinations, and it was histopathologically confirmed. The patient underwent postoperative follow-up evaluations at 3, 6 and 12 months, and there were no signs of recurrence.

Visual Patient technology is a situation awareness–oriented visualization technology that translates numerical and waveform patient monitoring data into a new user-centered visual language. Vital sign values are converted into colors, shapes, and rhythmic movements—a language humans can easily perceive and interpret—on a patient avatar model in real time. In this review, we summarize the current state of the research on the Visual Patient, including the technology, its history, and its scientific context. We also provide a summary of our primary research and a brief overview of research work on similar user-centered visualizations in medicine. In several computer-based studies under various experimental conditions, Visual Patient transferred more information per unit time, increased perceived diagnostic certainty, and lowered perceived workload. Eye tracking showed the technology worked because of the way it synthesizes and transforms vital sign information into new and logical forms corresponding to the real phenomena. The technology could be particularly useful for improving situation awareness in settings with high cognitive demand or when users must make quick decisions. This comprehensive review of Visual Patient research is the foundation for an evaluation of the technology in clinical applications, starting with a high-fidelity simulation study in early 2020.