The objective of this study was to analyze the in vitro stability and toxicity of liposomes containing guarana in skin cell lines. The liposomes were produced by the reverse phase evaporation method containing 1 mg/mL guarana. The stability of the liposomes was evaluated by physical-chemical parameters for up to 90 d using three different storage conditions. The cytotoxicity of guarana (GL), liposomes (B-Lip), and guarana-loaded liposomes (G-Lip) was evaluated on spontaneously immortalized human keratinocyte cell lines (HaCaT), murine swiss albino fibroblasts (3T3), and human fibroblast (1BR.3.G). The evaluation was performed using cellular viability analysis. The techniques used were 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and neutral red capturing (NRU) and the analyses were conducted after 24, 48, and 72 h exposure of these cells to the different treatments. The G-Lip exhibited physical-chemical stability for 60 d when the samples were stored in a refrigerator. The GL, B-Lip, and G-Lip demonstrated low cytotoxicity in the three cell cultures tested since a low reduction in cell viability was only observed at the highest concentrations. In addition, greater cell damage was observed for B-Lip; however, guarana protects cells from this damage. Thus, G-Lip structures can be considered as promising systems for topical applications.

Two-photon imaging of light stimulus-evoked neuronal activity has been used to study all neuron classes in the vertebrate retina, from the photoreceptors to the retinal ganglion cells. Clearly, the ability to study retinal circuits down to the level of single synapses or zoomed out at the level of complete populations of neurons, has been a major asset in our understanding of this beautiful circuit. In this chapter, we discuss the possibilities and pitfalls of using an all-optical approach in this highly light-sensitive part of the brain.

The application of machine learning techniques to satellite imagery has been the subject of interest in recent years. The increase in quality and quantity of images, made available by Earth observation programs, such as the Copernicus program, led to the generation of large amounts of data. Among the various applications of this data is the creation of land cover maps. The present work aimed to create machine learning models capable of accurately segment and classify satellite images, to automatically generate a land cover map of the Portuguese territory. Several experiments were carried out with the spectral bands of the Sentinel-2 satellite, with vegetation indices, and with several sets of land cover classes. Three machine learning architectures were evaluated, which adopt two different techniques for image classification. One of the classification techniques follows an object-oriented approach, and in this case the architecture adopted in our models was a U-Net artificial neural network. The other classification technique is pixel-oriented, and the machine learning models tested were random forest and support vector machine. The overall accuracy of the results obtained ranged from 68.6% to 94.75%, depending strongly on the number of classes into which the land cover is classified. The result of 94.75% was obtained when classifying the land cover only into 5 classes. However, a very interesting accuracy of 92.37% was achieved by the model when trained to classify 8 classes. These results are superior to those reported in the related bibliography.

Micro-nano-plastics (MNPs) are an important constituent of atmospheric aerosol. However, there is still no standard procedure for their sampling and size fractionation, which is an obstacle to the aggregation and critical analysis of results obtained by different research groups. This review focuses on the sampling and fractionation methodologies used for MNPs. Moreover, a straightforward optimized methodology for the sampling and fractionation is proposed.

In the paper, by a very simple approach, the author establishes an expression in terms of a lower Hessenberg determinant for the Euler polynomials. By the determinantal expression, the author finds a recurrence relation for the Euler polynomials. By the way, the author derives the corresponding expression and recurrence relation for the Euler numbers.

The global trade and transportation sectors heavily rely on the maritime industry. Still, its dependence on fossil energy sources poses significant environmental challenges and leads to unstable fuel prices that affect the cost of goods transported by sea. This paper aims to evaluate the viability of seaports as energy-intensive entities and explore the feasibility of implementing a Nuclear-Renewable Hybrid Energy System (NRHES). The study presents a case study of the Tanjung Priok Port in Indonesia, focusing on estimating energy consumption, emissions, and the potential impact of carbon taxation on seaport operations. By quantifying these factors, the research provides insights into the energy requirements, environmental effects, and potential costs associated with seaport carbon taxation. A comprehensive analysis of the technical and economic feasibility of implementing an NRHES in the seaport case study is conducted, determining the optimal sizing and composition of components, considering the proportion of nuclear and renewable energy sources. Additionally, the economic analysis considers energy costs, net present cost, cash flow, return on investment, and internal rate of return. The findings aim to inform decision-makers about the benefits and challenges of adopting an NRHES, contributing to a cleaner and more sustainable future for the maritime industry.

Personal Information Management Systems (PIMS) are acquiring a prominent role in the data economy by promoting services that help individuals to have more control over the processing of their personal data, in line with the European data protection law. One of the highlighted solutions in this area is Solid, a new protocol that is decentralizing the storage of data, through the usage of interoperable Web standards and semantic vocabularies, to empower its users to have more control over the processing of data by agents and applications. However, to fulfill this vision and gather widespread adoption, Solid needs to be aligned with the law governing the processing of personal data in Europe, the main piece of legislation being the General Data Protection Regulation (GDPR). To assist with this process, we analyze the current efforts to introduce a policy layer in the Solid ecosystem, in particular, related to the challenge of obtaining consent for processing personal data, focusing on the GDPR. Furthermore, we investigate if, in the context of using personal data for biomedical research, consent can be expressed in advance, discuss the conditions for valid consent and how it can be obtained in this decentralized setting, namely through the matching of privacy preferences, set by the user, with requests for data and whether this can signify informed consent. Finally, we discuss the technical challenges of an implementation that caters to the previously-identified legal requirements.

Euler sums are alternating (or level two) extension of multiple zeta values (MZVs). Kaneko and Tsumura initiated the study of multiple T-values (MTVs), another level two generalization, by restricting the summation indices in the definition of MZVs to a fixed parity pattern. In this paper, we shall study finite MTVs and their alternating versions which are level two and level four variations of finite MZVs, respectively. We conjecture that all finite MZVs are in the Q-span of finite MTVs which in turn apparently lie in the span of finite Euler sums, and the inclusions are both proper. We shall first provide some structural results for Euler sums of small weights, guided by the author's previous conjecture that the finite Euler sum space of weight w is isomorphic to a quotient Euler sum space of weight w. Then, by utilizing some well-known properties of the classical alternating MTVs, we shall derive a few important Q-linear relations among the finite alternating MTVs, including the reversal, linear shuffle and sum relations. We then compute the upper bound for the dimension of the Q-span of weight w finite (alternating) MTVs for w<9, both rigorously using the newly discovered relations and numerically aided by computers.

Compared to tin lead alloys, lead-free tin alloys have lower toxicity, making them more widely used. In this study, Sn-20Bi-0.3Al-xY solders alloys were prepared. The effects of the addition of Y on its microstructure, micro-hardness, wettability and mechanical properties was investigated. The result showed that the addition of Y had significant effect on the refinement of Sn-20Bi-0.3Al-xY. From the spreading tests results, Y increased the wettability of the solders, however when the fraction of Y gradually increased, the wettability reduced. The ultimate tensile and hardness of Sn-20Bi-0.3Al-xY solders alloys were increased as the content of Y increasing.

In this paper, we investigate the recently introduced degenerate Bernstein polynomials and operators and derive some of their properties. Also, we give some properties of the degenerate Euler numbers and polynomials and their connection with the degenerate Euler polynomials.

In the present paper, we introduce (p, q)-extension of Apostol type Frobenius-Euler polynomials and numbers and investigate some basic identities and properties for these polynomials and numbers, including addition theorems, difference equations, derivative properties, recurrence relations and so on. Then, we provide integral representations, explicit formulas and relations for these polynomials and numbers. Moreover, we discover (p, q)-extensions of Carlitz's result [L. Carlitz, Mat. Mag., 32 (1959), 247–260] and Srivastava and Pintér addition theorems in [H. M. Srivastava, A. Pinter, Appl. Math. Lett., 17 (2004), 375–380].

Motivated by Kim-Kim [19] introduced the new type of degenerate poly- Bernoulli polynomials by means of the degenerate polylogarithm function. In this paper, we define the degenerate poly-Frobenius-Euler polynomials, called the new type of degenerate poly-Frobenius-Euler polynomials, by means of the degenerate polylogarithm function. Then, we derive explicit expressions and some identities of those numbers and polynomials.

The transportation sector is a significant source of greenhouse gas emissions. Electric vehicles (EVs) have gained popularity as a solution to reduce emissions, but the high load of charging stations poses a challenge to the power grid. Nuclear-Renewable Hybrid Energy Systems (N-RHES) present a promising alternative to support fast charging stations, reduce grid dependency, and decrease emissions. However, the intermittent problem of renewable energy sources (RESs) limits their application, and the synergies among different technologies have not been fully exploited. This paper proposes a predictive and adaptive control strategy to optimize the energy management of N-RHES for fast charging stations, considering the integration of nuclear, photovoltaics, and wind turbine energy with a hydrogen storage fuel cell system. The proposed dynamic model of a fast-charging station predicts electricity consumption behavior during charging processes, generating probabilistic forecasting of electricity consumption time-series profiling. Key performance indicators and sensitivity analyses illustrate the practicability of the suggested system, which offers a comprehensive solution to provide reliable, sustainable, and low-emission energy to fast-charging stations while reducing emissions and dependency on the power grid.

The popular appreciation of dry white wines is most frequently directed to young wines. However, present consumption trends comprise the valorisation of aged dry white wines. Therefore, the present work was aimed at the sensory analysis of these wines with different ages to define their sensory space and to understand which factors drive their quality evaluation by experienced tasters (critics, oenologists and students). Individuals were asked to evaluate several synthetic and aesthetic attributes and to characterise the analytic sensory profile through a Check-All-That-Apply (CATA) methodology. The quality evaluations were differently correlated with wine synthetic parameters according to the taster group. For both critics and oenologists, overall quality scores were driven by persistence and complexity. Moreover, quality was also highly correlated with power for critics and with balance for oenologists. Quality scores were highly correlated with wine browning (absorbance at 420 nm) for critics. The tasting panel showed a homogeneous analytic description of aroma, taste and mouthfeel consistent with wine age. The different ages could be associated to a continuous sensory space characterised by a decreasing perception of freshness and increase in mature and mellowed descriptors. All wines shared an austere in-mouth perception elicited by their acidity, saltiness, bitterness, smoothness and dryness. The age prediction showed that most tasters failed to guess the age wines with more than roughly 13 years old, indicating that tasters were not familiar with the sensory features of white wines with 17 to 46 years old. In conclusion, experienced tasters consistently described the sensory space and recognised the high quality of aged dry white wines. Education programs may use the defined sensory spaces according to aging and to expand the range of quality perception by consumers.

Agriculture is the main economic activity of Mozambique and there is lack of information about the quality of agricultural soils. In this paper, five soils from the Manica and Sussudenga districts (Manica province) were sampled in the years 2021/2022 and 2022/2023 (before and after the rainy seasons), were subjected to an agronomical and environmental chemical analysis to assess its quality, either from the fertility and environmental contamination point of view. Standard analytical methodologies from external certified laboratories and local X-ray fluorescence measurements were used. All the studied soils are acidic (pH ranging from 4.5 and 5.4), have no salinity problems (conductivity ranging from 4.2 to 11.8 mS/m), have low amount of soil organic matter (0.90% to 1.81%), and soils from the Sussudenga district have a very low cation exchange capacity (CEC) (average of 3.33 cmolc/kg), while those from Manica district ranges from very low to average CEC (3.59 to 13.11 cmolc/kg). Also, Sussudenga soils have a phosphorous deficiency (values ranging from &lt;20 to 38.5 mg/kg) and there are deficiencies and/or excesses of some macro and micronutrients in all soil samples. Manica soils are contaminated, apparently from geogenic origin, with Cr (280 to 1400 mg/kg), Co (80 mg/kg), Ni (78 to 680 mg/kg) and V (86 mg/kg). Agricultural soils monitoring must be fostered in Mozambique in order to improve food quality and quantity to assure economic and environmental sustainability.

Mozambique is one of the poorest countries of the world. However, it has natural resources and if they are managed under sustainable development principles, Mozambique can overcome the current problems. In the present socio-economic status, soil is one of its most important resources and must be protected from pollution and from degradation. This review focuses on the identification and discussion of the main soil quality stressors, namely: soil fertility; deforestation and its sources: agriculture, timber harvesting, charcoal production and uncontrolled fires; mining activities, manly gold artisanal explorations and industrial open-pit coal mining. The sustainable use of the natural resources is mandatory to allow future generations to continue profiting for this nature-based wealth.

In this paper, we consider a new class of polynomials which is called the multi-poly-Euler polynomials. Then, we investigate their some properties and relations. We provide that the type 2 degenerate multi-poly-Euler polynomials equals a linear combination of the degenerate Euler polynomials of higher order and the degenerate Stirling numbers of the first kind. Moreover, we provide an addition formula and a derivative formula. Furthermore, in a special case, we acquire a correlation between the type 2 degenerate multi-poly-Euler polynomials and degenerate Whitney numbers.

Type 2 Diabetes Mellitus is a chronic metabolic disease that poses a significant long-term health risk due to its debilitating complications. While the diagnosis and monitoring of diabetes are well-established, the monitoring of its numerous complications presents a challenge, which can compromise patients' prognosis and quality of life. We analyzed the proteome of ten saliva samples, five from healthy individuals and five from patients with Type 2 Diabetes Mellitus. The aim was to identify potential biomarkers of Type 2 Diabetes Mellitus and its complications. We used PANTHER and FUNRICH tools to conduct a functional analysis and enrichment approach. Our findings revealed 622 proteins involved in 16 disrupted biological processes, which are linked to Type 2 Diabetes Mellitus. Metabolic processes, response to stimuli, processes of the immune system, and signaling are notable due to their known relation with Type 2 Diabetes Mellitus. Enrichment analysis has revealed that there are eleven biological processes that have been deregulated. These processes involve twenty different salivary proteins that are associated with multiple complications in diabetes. Our findings demonstrate that saliva is a dependable source of possible biomarkers that can be used to monitor diabetes and its complications.

Currently, in a context of biorefinery and bioeconomy, lignocellulosic biomass is increasingly used to produce biofuels, biochemicals and value-added products. Microwaves and ultrasounds are emerging techniques that enable efficient and environmentally more sustainable routes in the transformation of lignocellulosic biomass. This review is divided into four parts. In Part I, the theoretical foundations of microwaves and ultrasounds are revisited. Dielectric constants for biomass, factors that influence pre-treatment, are some of the subjects addressed. In Part II, the effects that these technologies have on lignocellulosic biomass (on the size and surface area of the particle; on the content of lignin, hemicellulose and cellulose; on the crystallinity index of cellulose; on the effect of solubilization of organic matter; on hydrolysis and reduction of sugars) are analyzed. In Part III, emphasis is given on how microwaves and ultrasounds can contribute to the achievement of value-added products. In this context, several examples of liquefactions and extractions are presented. Part IV describes examples of sonocatalysis of lignocellulosic biomass to obtain value-added products such as for instancethe production of furfural, which is significantly reduced by ultrasound.

In this paper, we construct the degenerate poly-Frobenius-Genocchi polynomials, called the type 2 degenerate poly-Frobenius-Euler polynomials, by means of polyexponential function. We derive explicit expressions and some identities of those polynomials. In the last section, we introduce type 2 degenerate unipoly-Frobenius-Genocchi polynomials by means of unipoly function and derive explicit multifarious properties.

Kim-Kim [12] introduced the new type of degenerate Bernoulli numbers and polynomials arising from the degenerate logarithm function. In this paper, we introduce a new type of degenerate poly-Euler polynomials and numbers, are called degenerate poly-Euler polynomials and numbers, by using the degenerate polylogarithm function and derive several properties on the degenerate poly-Euler polynomials and numbers. In the last section, we also consider the degenerate unipoly-Euler polynomials attached to an arithmetic function, by using the degenerate polylogarithm function and investigate some identities of those polynomials. In particular, we give some new explicit expressions and identities of degenerate unipoly polynomials related to special numbers and polynomials.

Cement production contributes to about 7% of CO2 emissions into the atmosphere. Despite our best efforts, we cannot find a competitive substitute that is both reliable and environmentally friendly. The simplest way to solve the problem is to rationalize the resources and try to minimize its use by substitute them with other materials. A concrete that contains a substantial amount of fly ash is already available, but its use is limited by the current shortage in the market and reduced initial resistance. In this context, ternary mixtures have been used to conduct an experiment. A significant volume of cement has been replaced with fly ash and metakaolin, which serves as a correction factor for the performance. In this work the main advantages and disadvantages of the simultaneous use of these two additions, which may reveal to be very interesting with high volumes of substitution will be presented. The performance of this ternary mixture is very promising. Provide a wide range of possibilities for replacing cement, maintaining or even improving its mechanical and durability properties. A solution for an ecological concrete with enhanced performance for general use in construction as an alternative to conventional concrete.

Cork oak mortality has reached alarming proportions in the last decades, exacerbated by climate change. Understanding this phenomenon is crucial in finding mitigation or adaptation strategies. This study conducts a diachronic analysis of cork oak mortality over 10 years using GIS tools, focusing on Portugal's Tagus Lezíria region. Topographic, edaphic and climatic variables were employed to create maps of edaphoclimatic aptitude for cork oaks. Dead trees were identified using remote sensing techniques and crown coverage was determined to calculate the mortality index. The diachronic analysis aimed to explore climate change effects on cork oak mortality. A decrease in precipitation was observed, significantly impacting stands with canopy cover below 40%. Furthermore, a negative effect of solar radiation identified only in stands with canopy cover of 40% suggested its role in cork oak decline. This study introduces a novel perspective, highlighting the protective effect of denser canopy cover (above 40%) against excessive solar radiation and the impact of reduced precipitation. The integrated and diachronic approach provides valuable information for adapting management strategies to climate change challenges.

The simplest elasticity model of foundation underlying a slender beam under flexure was conceived by Winkler, requiring local proportionality between soil reactions and beam deflection. Such an approach leads to well-posed elastostatic and elastodynamic problems, but, as highlighted by Wieghardt, it provides elastic responses which are not technically significant for a wide variety of engineering applications. Thus, Winkler's model was replaced by Wieghardt himself by assuming that the beam deflection is the convolution integral between soil reaction field and an averaging kernel. Due to conflict between constitutive and kinematic compatibility requirements, the corresponding elastic problem of an inflected beam resting on Wieghardt foundation results to be ill-posed. Modifications of the original Wieghardt model were proposed by introducing fictitious boundary concentrated forces of constitutive type, which are physically questionable, being significantly influenced on prescribed kinematic boundary conditions. Inherent difficulties and issues are overcome in the present research using a displacement-driven nonlocal integral strategy got by swapping input and output fields involved in Wieghardt's original formulation. That is, nonlocal soil reaction fields are output of integral convolutions of beam deflection fields with an averaging kernel. Equipping the displacement-driven nonlocal integral law with the bi-exponential averaging kernel, an equivalent nonlocal differential problem, supplemented with non-standard constitutive boundary conditions involving nonlocal soil reactions, is established. As a key implication, the integro-differential equations governing the elastostatic problem of an inflected elastic slender beam resting on displacement-driven nonlocal integral foundation are replaced with much simpler differential equations supplemented with kinematic, static and new constitutive boundary conditions. The proposed nonlocal approach is illustrated by examining and analytically solving exemplar problems of structural engineering. Benchmark solutions for numerical analyses are also detected.

Poly(vinylidene fluoride) nanocomposites processed with different morphologies, such as porous and non-porous films and fibres, have been prepared with silica nanoparticles (SiNPs) of varying diameter (17, 100, 160 and 300 nm) which in turn have encapsulated perylenediimide (PDI), a fluorescent molecule. Structural, morphological, optical, thermal, and mechanical properties of the nanocomposites, with SiNP filler concentration up to 16 wt% were evaluated. Further, cytotoxicity and cell proliferation studies were performed. All SiNPs are negatively charged independently of the pH and more stable from pH 5 upwards. The SiNPs introduction within the polymer matrix increases the contact angle independently of the nanoparticle diameters and the smallest ones (17 nm) improve the PVDF Young modulus from 0.94 ± 0.04 GPa for the pristine polymer film to 1.05 ± 0.06 GPa. Varying filler diameter, physico-chemical, thermal and mechanical properties of the polymer matrix were not significantly affected. Finally, the SiNPs inclusion does not induce cytotoxicity in murine myoblasts (C2C12) after 72 h of contact and proliferation studies reveal that the prepared composites represent a suitable platform for tissue engineering applications, as they allow to combine the biocompatibility and piezoelectricity of the polymer with the possible functionalization and drug encapsulation and release of the SiNP.

Nowadays, the most advanced micromachined microphones on the market are based on a capacitive coupling principle. Capacitive micro-electro-mechanical systems-based (MEMS) microphones resemble their millimetric counterparts, both in function and in performances. The most advanced MEMS microphones reached a competitive level compared to commonly used measuring microphones in most of the key performance parameters except the acoustic overload point (AOP). In an effort to find a solution for measurement of high-level acoustic fields, microphones with piezoelectric coupling principle have been proposed. Such novel microphones exploit the piezoelectric effect of a thin layer of aluminum nitride, which is incorporated in their diaphragm structure. In these microphones fabricated with micromachining technology, no fixed electrode is necessary, in contrast to capacitive microphones. This specificity significantly simplifies both the design and the fabrication and opens the door for a new improvement of the acoustic overload point as well as harsh environmental applications. Several variations of piezoelectric structures together with an idea leading to electrically controlled sensitivity of MEMS piezoelectric microphone are discussed in the paper.

In the present paper, the (p,q)-Hermite based Apostol type Frobenius-Euler polynomials and numbers are firstly considered and then diverse basic identities and properties for the mentioned polynomials and numbers, including addition theorems, difference equations, integral representations, derivative properties, recurrence relations. Moreover, we provide summation formulas and relations associated with the Stirling numbers of the second kind.

Organophosphate pesticides (OPs) are toxic substances that contaminate aquatic environments, interfere with the development of the nervous system, and induce Neurodevelopmental Toxicity (NDT) in animals and humans. The canonical mechanism of OP neurotoxicity involves the inhibi-tion of acetylcholinesterase (AChE), but other mechanisms non-AChE are also involved and not fully understood. We used network toxicology and molecular docking to identify molecular targets and toxicity mechanisms common to OPs. Targets related to diazinon-oxon, chlorpyrifos oxon, and paraoxon OPs were predicted using the Swiss Target Prediction and PharmMapper databases. Targets related to NDT were compiled from GeneCards and OMIM databases. In order to construct the protein-protein interaction (PPI) network, the common targets between OPs and NDT were imported into the STRING. Networks topological analyses identified EGFR, MET, HSP90AA1, and SRC as hub nodes common to the three OPs. Using Reactome pathway and gene ontology we found that signal transduction, axon guidance, cellular responses to stress, and glutamatergic signaling activation play key roles in OP-induced NDT.

Industrial manipulators and parallel robots are often used for tasks like drilling or milling, that require three translational, but only two rotational degrees of freedom (“3T2R”). While kinematic models for specific mechanisms for these tasks exist, a general kinematic model for parallel robots is still missing. This paper presents the definition of the rotational component of kinematic constraints equations for parallel robots based on two reciprocal sets of Euler angles for the end-effector orientation and the orientation residual. The method allows to completely remove the redundant coordinate in 3T2R tasks and to solve the inverse kinematics for general serial and parallel robots with the gradient-descent algorithm. The functional redundancy of robots with full mobility is exploited using nullspace projection.

Polyalcohol liquefaction can be done by acid or basic catalysis producing polyols with different properties. This study compared the mechanical properties of foams produced using polyols from liquefied Cytisus scoparius obtained by acid and basic catalysis and using two different foam catalysts. The differences were monitored using FTIR analysis. Acid-catalyzed liquefaction yielded 95.1 %, with the resultant polyol having an OH index of 1081 mg KOH/g while basic catalysis yielded 82.5 %, with a similar OH index of 1070 mg KOH/g. Generally, compressive strength with dibutyltin dilaurate (DBTDL) ranged from 16 - 31 kPa (acid-liquefied polyol) and 12 -21 kPa (base-liquefied polyol), while with stannous octoate (TIN), it ranged from 17 - 42 kPa (acid) and 29 - 68 kPa (base). Increasing water content generally decreased the compressive modulus and strength of foams. Higher water content led to a higher absorption at 1670 cm-1 in the FTIR spectrum due to the formation of urea. Higher isocyanate indices generally improved compressive strength, but high amounts led to unreacted isocyanate that could be seen by a higher absorption at 2265 cm-1 and 3290 cm-1. DBTL was shown to be the best foam catalyst due to higher trimer conversion seen in the spectra by a higher absorption at 1410 cm-1. Acid and base-derived polyols lead to different polyurethane foams with different FTIR spectra, particularly with a higher absorption at 1670 cm-1 for foams from acid-derived liquefaction.

Introduction: The aim of the present systematic review was to evaluate the clinical and radiographic success of partial pulpotomies in deep caries processes or post-eruptive defects in young, vital permanent teeth. Methods: Electronic databases, PubMed, Scopus, and Embase, were searched, followed by a manual search. Randomized controlled trials evaluating partial pulpo-tomy with a follow-up period of ≥12 months were included. Meta-analyses using a random effect model were performed. Results: A total of 3.127 articles were retrieved, and after duplicate re-moval, 2.642 were screened by title and abstract; 1 additional article was found during the manual search in the reference lists, and 79 were identified. Finally, 6 papers were included in the review. Regardless of the partial pulpotomy modalities or material used, there were no signifi-cant differences between clinical and radiographic success rates (cumulative success rate 91,8%-92,3%, respectively). Five studies were included in the meta-analysis that did not indicate any statistically significant differences in success rates when Mineral Trioxide Aggregate was compared to other materials (95% CI 0,239 to 1,016 p=0.055). Conclusion: This research system-atically evaluates the evidence and summarises the available data on partial pulpotomy in young permanent teeth. Given its high clinical and radiographic success rate, partial pulpotomy should be considered when vital pulpal therapy needs to be performed in highly damaged young per-manent teeth, as this procedure provides a biological benefit and allows more invasive endodon-tic treatments to be postponed.

Globalization has had an impact on the education system in the UAE, where increased use of bilingual curriculum (Arabic-English) is held in high regard. Nevertheless, literacy among Emirati children and teenagers remains low. This study uses a 15-item, open-ended questionnaire completed by Emirati parents and an 8-item, open-ended questionnaire completed by Emirati primary school children from 8 to 11 years of age, and compares the translation of The Little prince into Modern Standard Arabic (MSA) and into the Emirati dialect. The results suggest that not only the Emirati dialect, but any Arabic dialect (in its respective Arab country) could be used in primary schools to motivate children to read in Arabic and bridge the gap between their spoken language (dialect) and formal written Arabic. Not only must an Arab child learn how to read, but also, they have to understand a very formal language system that they are not used to speaking at home, i.e., Modern Standard Arabic (MSA). Having books in their own dialects may make children more interested in reading, as they can understand them more easily.

This paper presents the simplified and quick way to obtain an experimental measure of the modulus of elasticity(E) of a piece of metal rod using the Smartphone microphone and through the experimental configuration in mode of unsupport beam Euler-Bernoulli(E-B). To understand it, it is required to have knowledge about flexural vibration of E-B beams and to know the analysis of the spectogram of the audio signal. The methodology consists in measuring the flexural resonance frequency through an app installed on a Smartphone and using the E formula deduced from the E-B theoretical framework. The results of the experimental measurements have a discrepancy of less than 5% with respect to the factory value, for a carbon steel rod with circular cross section using the impact excitation technique. It describes the precision and accuracy of the experimental measurement. It is useful, because it helps to classify the materials in the Faculty of Engineering and it helps to make a more efficient quality control.

In the paper, by virtue of the Fa`a di Bruno formula, some properties of the Bell polynomials of the second kind, and the inversion formulas of binomial numbers and the Stirling numbers of the first and second kinds, the authors simplify meaningfully and significantly coefficients in two families of ordinary differential equations associated with higher order Frobenius–Euler numbers.

The bonds of England and the UAE date back to over 220 years ago. This article explores the interference of Arabic prepositions in the English used in the United Arab Emirates (UAE), and their occurrences in light of gender and level of education, two important social variables related to linguistic behavior. To do so, participants will translate 20 sentences in Arabic into English as well as fill in 30 gaps in sentences in English with the missing prepositions. We will also experiment how musical intelligence may improve Emiratis’ performance regarding preposition. A study will be carried out to verify if participants from the experimental group, who will receive training on prepositions through music, obtains better results compared to the control group, who will receive training through a more traditional way (by listening to the instructor and repeating).

Keywords: Wood residuals; Forest biomass; Wood composite; Wood floor; Life Cycle Assessment.

This review focus on a critical analysis of nanocatalysts for Advanced Reductive Processes (ARP) and Oxidation Processes (AOP) designed for the degradation of poly/perfluoroalkyl substances (PFAS) in water. Ozone, ultraviolet and photocatalyzed ARP and/or AOP will be the basic treatment technologies. Besides the review of the nanomaterials with greater potential as catalyst for advanced processes of PFAS in water, the perspectives for its future development considering sustainability considerations will be discussed. Moreover, a brief analysis of the current state of the art of the ARP and AOP for the treatment of PFAS in water will be presented.

Nowadays the dynamism induced by the constant change of strategic decisions on the markets produces an extra difficulty in the management of an organization. The strategic decisions made by managers can become obsolete in a short period of time. One of the major difficulties in managing a commercial organization is to predict, with some precision degree, the impact some strategic decisions have on the financial results. Business Intelligence (BI) is an area widely used to help managers to make strategic decisions. But the methods used, behind the scenes, to achieve the conclusions are kept secret by BI company-based services. Modelling the environment can be a good option to study the impact of an action, provided by a strategic decision, in a real environment. A good model should give an approximate result of an action applied to a previous state of the environment. Artificial Neural Networks (ANNs) are proven to be excellent in modeling environments with some level of data noise. The same strategic action can have different results in different organizations. A tool that allows an evaluation of a strategic action applied to an environment should have a major importance in the management scope. Modeling the environment should save time and money for the organization to improve the performance of the strategic plan. If one evaluates the state of the environment after a strategic action being applied, it can be possible to mitigate the risk of failure of the strategic plan. As we will be able to verify, it is possible to use ANNs to model strategic environments that should allow the prediction of sales and operating results by the used strategies with some precision, although the level of success will be directly related with the user’s necessity.

Traditional discrimination techniques for Euler deconvolution use only the color spectrums of structural indexes, without considering the spatial distribution characteristics and inherent relationships among the Euler solutions to separate adjacent causative sources. In the present study, a new approach was developed for discriminating uncorrelated Euler solutions from coherent solutions based on the focusing levels indicated by the probability density distributions generated using multivariate kernel density estimations (KDE). A novel multiple coverage technique was proposed by using a series of different sized moving windows over gridded gravity data, which formed tight clusters of Euler solutions for different sized causative sources. The results of the probability density distributions were obtained using a 3-D KDE method for the Euler solution subsets {x, y, z} of synthetical models, and real data from a survey conducted in British Columbia (Canada) which had successfully established more credible and meaningful geological models when compared with three other subsets.

Green carbon-based materials (GCM), i.e. carbon materials produced using renewable biomass or recycled wastes, ought to be used in order to processes become sustainable and carbon neutral. Carbon nanomaterials, like for example carbon dots and nanobichar families, and carbon materials, like for example activated carbon and biochar substances, are sustainable materials with great potential to be used in different technology applications. In this review, the following four applications were selected, and the works published in the last two years (since 2022) critically reviewed: agriculture; water treatment; energy management; and, carbon dioxide reduction and sequestration. GCM improved the performance of the technological applications under revision and play an important role in the sustainability of the processes, contributing to the mitigation of the climate change, namely by reducing emission and increase sequestration of CO2eq..

Biomass-derived carbon dots (CDs) are gaining much interest in recent times as it is a sustainable option with abundant availability, low cost, and tunable luminescence. Herein, we report a simple green synthesis method to produce highly fluorescent CDs from Eucalyptus globulus leaves using the one-pot hydrothermal approach. The fabricated CDs exhibit strong blue fluorescence with an excitation and emission maxima of 340 nm and 442 nm respectively. The highest quantum yield (QY) obtained was 60.7%. Due to its promising optical properties and biocompatibility, CDs can be a potential candidate for biosensing applications. Moreover, we employed a life cycle assessment (LCA) cradle-to-gate approach to study the environmental impacts of the synthesis strategy used for the fabrication of CDs. The results point out that citric acid is a main hotspot in CDs synthesis, regarding environmental impacts in most categories. This justifies the introduction of biomass, which reduces the amount of citric acid, thus leading to a more sustainable synthesis strategy for fabricating CDs.

A sustainable matrix based on eucalyptol essential oil/sawdust was developed and applied on one-sided laminated plywood. This finish aims to serve as a eucalyptol odor slow release. Eucalyptol odor release was monitored with gas chromatography coupled with a flame ionization detector (GC – FID: Limits of Detection and Quantification of 0.70 g/m3 and 2.11 g/m3, respectively, and with linearity up to 18.6 g/m3). Measurement of the eucalyptol odor released was performed during a six-month period and it was found that the release followed a first-order exponential decay with a decay rate constant of 0.0169 per day. The half-life was determined to be of 48 days. The granulometry and particle size porosity of sawdust were analyzed by Scanning Electron Microscopy. Sawdust size fraction between 112 – 200 μm showed best eucalyptol absorption capacity with 1:3 masses ratio (sawdust:eucalyptol). The time capacity of eucalyptol release depends of composite eucalyptol – sawdust quantity. Where this relation was determined: 15.0 grams of composite eucalyptol-sawdust by 0.8 mm diameter aperture gave 6 months of eucalyptol release, that was considered very positive, understanding high volatility of eucalyptol and a small quantity of composite for further products. The new product is characterized by a carbon footprint (considering the industry frontiers) of 5.94 kg CO2eq/m2 of plywood floor.

Recent works in mechanical fatigue consider that a threshold of entropy exists, the fracture fatigue entropy. The determination of this quantity is usually done considering empirical models for the mechanical power estimation. In this paper, we experimentally observe the existence of a threshold of entropy and exergy in low cycle fatigue for a flat Al-2024 specimen avoiding the use of a model, solely measuring the heat generated during a fatigue test. Results are then compared considering various hypotheses (1D heat dissipation with convection and radiation considered as heat sources, and, heat transfer from a fin with convection and radiation as boundary conditions) to an empirical mechanical model known in the literature and deviations between them are discussed.

This paper presents a study about the integration of Piezoelectric Energy Harvesting Systems (PE-EHS) in building envelopes for powering Fiber Bragg Grating (FBG) sensors, enabling efficient and low-consumption monitoring with the objective to leverage Structural Health Monitoring (SHM). The research includes preliminary tests conducted in a real environment to validate the PE-EHS when fully integrated into the façade, capturing mechanical vibrations generated mainly by wind loads. Based on these activities, the final configuration of PE-EHS is defined to provide a complete system for façade monitoring. This integrated system includes the Piezoelectric Generator (PEG), Supercapacitor (SC), Power Conditioner Circuit (PCC), Fibre Optic Sensing (FOS) Interrogator, and the IoT Gateway trans-mitting measurement data within an Internet of Things (IoT) monitoring platform. This configuration is tailored to address the challenges related to the structural integrity of building envelopes. Results demonstrate a potential for a stand-alone solution in the façade sector, but, raising issues for certain limitations, requiring further investigation. In particular, the study emphasizes constraints related to the energy production of PE-EHS for façade integration. It highlights the necessity to carefully consider these limitations within the broader context of their applicability, providing insights for the informed deployment of Piezoelectric Energy Harvesting technology in building envelope monitoring.

The global population is at risk of vitamin D deficiency due to low exposure to sunlight and low intake of the vitamin through diet. The aim was to investigate in women the association between vitamin D status and parathyroid hormone (PTH), ultraviolet radiation, lifestyle, ethnicity, social conditions, and residential greenness. A 1-year longitudinal study assessed vitamin D status in 309 women, latitude 51° 14' N. Blood samples were taken four times throughout the year for analysis of 25(OH)D and serum PTH concentration. After each seasonal visit, the individuals completed 4-day diet diaries and used two dosimeter badges for 1 week to estimate weekly UVR exposure. A questionnaire was applied to provide information about lifestyle and their ethnicity. Residential greenness was measured by Normalized Difference Vegetation Index (NDVI), within a 1000 m radius around each participant’s home address. Women living in greener spaces were more likely to have improved vitamin D status (RR: 1.51; 95%CI: 1.13 – 2.02), as well as those who were more exposed to UVR (RR: 2.05; 95%CI: 1.44 – 2.92). Our results provided a first insight into the connection between vitamin D, residential greenness, and lifestyle in a region of temperate climate and with a high degree of urbanization.

This paper presents an approach to the Euler-Bernoulli beam theory (EBBT) using the finite difference method (FDM). The EBBT covers the case of small deflections, and shear deformations are not considered. The FDM is an approximate method for solving problems described with differential equations. The FDM does not involve solving differential equations; equations are formulated with values at selected points of the structure. Generally, the finite difference approximations are derived based on fourth-order polynomial hypothesis (FOPH) and second-order polynomial hypothesis (SOPH) for the deflection curve; the FOPH is made for the fourth and third derivative of the deflection curve while the SOPH is made for its second and first derivative. In addition, the boundary conditions and not the governing equations are applied at the beam’s ends. In this paper, the FOPH was made for all of the derivatives of the deflection curve, and additional points were introduced at the beam’s ends and positions of discontinuity (concentrated loads or moments, supports, hinges, springs, etc.). The introduction of additional points allowed us to apply the governing equations at the beam’s ends and to satisfy the boundary and continuity conditions. Moreover, grid points with variable spacing were also considered, the grid being uniform within beam segments. First-order analysis, second-order analysis, and vibration analysis of structures were conducted with this model. Furthermore, tapered beams were analyzed (element stiffness matrix, second-order analysis). Finally, a direct time integration method (DTIM) was presented. The FDM-based DTIM enabled the analysis of forced vibration of structures, with damping taken into account. The results obtained in this paper showed good agreement with those of other studies, and the accuracy was increased through a grid refinement. Especially in the first-order analysis of uniform beams, the results were exact for uniformly distributed and concentrated loads regardless of the grid. Further research will be needed to investigate polynomial refinements (higher-order polynomials such as fifth-order, sixth-order…) of the deflection curve; the polynomial refinements aimed to increase the accuracy, whereby non-centered finite difference approximations at beam’s ends and positions of discontinuity would be used.

Inside hippocampal circuits, neuroplasticity events that individual cells may undergo during synaptic transmissions occur in the form of Long Term Potentiation (LTP) and Long Term Depression (LTD). The high density of NMDA receptors expressed on the surface of the dendritic CA1 spines confers to hippocampal CA3-CA1 synapses, the ability to easily undergo NMDA-mediated LTP and LTD, that is essential for some forms of explicit learning in mammals. Providing a comprehensive kinetic model that can be used for running computer simulations of the synaptic transmission process is currently a major challenge. Here, we propose a compartmentalized kinetic model for CA3-CA1 synaptic transmission. Our major goal was to tune our model in order to predict the functional impact caused by disease associated variants of NMDA receptors related to severe cognitive impairment. Indeed, for variants Glu413Gly and Cys461Phe, our model predicts negative shifts in the glutamate affinity and changes in the kinetic behavior, consistent with experimental data. These results pinpoint to the predictive power of this multiscale viewpoint, which aims to integrate the quantitative kinetic description of large interaction networks typical of system biology approaches with a focus on the quality of few, key, molecular interactions typical of structural biology ones.

This paper presents an approach to the vibration analysis of axially functionally graded (AFG) non-prismatic Euler-Bernoulli beams using the finite difference method (FDM). The characteristics (cross-sectional area, moment of inertia, elastic moduli, and mass density) of AFG beams vary along the longitudinal axis. The FDM is an approximate method for solving problems described with differential equations. It does not involve solving differential equations; equations are formulated with values at selected points of the structure. In addition, the boundary conditions and not the governing equations are applied at the beam’s ends. In this paper, differential equations were formulated with finite differences, and additional points were introduced at the beam’s ends and at positions of discontinuity (supports, hinges, springs, concentrated mass, spring-mass system, etc.). The introduction of additional points allowed us to apply the governing equations at the beam’s ends and to satisfy the boundary and continuity conditions. Moreover, grid points with variable spacing were also considered, the grid being uniform within beam segments. Vibration analysis of AFG non-prismatic Euler-Bernoulli beams was conducted with this model, and natural frequencies were determined. Finally, a direct time integration method (DTIM) was presented. The FDM-based DTIM enabled the analysis of forced vibration of AFG non-prismatic Euler-Bernoulli beams, considering the damping. The results obtained in this paper showed good agreement with those of other studies, and the accuracy was always increased through a grid refinement.

This study aimed to evaluate the impact of Candida albicans on subgingival biofilm formation on dental implant surfaces. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) were used to compare biofilm structure and microbial biomass in the presence and absence of the fungus after periods of 24, 48, and 72 h. Quantitative polymerase chain reaction (qPCR) was used to quantify the number of viable and total micro-organisms for each of the biofilm-forming strains. A general linear model was applied to compare CLSM and qPCR results between control and test conditions. The biofilm developed with C. albicans at 72 h had a higher bacterial biomass, with a significantly higher cell viability (p &lt; 0.05). After both 48 and 72 h of incubation, in the presence of C. albicans, there was a significant increase in counts of Fusobacterium nucleatum and Porphyromonas gingivalis and in the cell viability of Streptococcus oralis, Aggregatibacter actinomycetemcomitans, F. nucleatum, and P. gingivalis. Using a dynamic in vitro multispecies biofilm model, C. albicans exacerbated the development of the biofilm grown on dental implant surfaces, significantly increasing the number and cell viability of periodontal bacteria.

This article evaluates Europe's building sector's circular economy (CE). This industry is respon-sible for 42% of energy consumption, more than 50% of extracted materials, 30% of Europe's wa-ter and waste generation, and 35% of greenhouse gas (GHG) emissions. This study focuses on peer-reviewed articles from Scopus and Web of Science databases. Of the first 1750 publications, 2.9% were eligible for a full-text reading and analysis. Most of the trending studies, 92%, pro-mote the circular economy concept through construction materials rather than analyzing the im-pact of the construction sector on the environment and finding solutions for better implementa-tion, and 41% promote recycling and reuse as the only options. New Design solutions are in 12% of the studies, six-fold more than Law and Legislation, only 2%. Finding an optimal combination of assessing the life cycle of buildings and components and searching for different ways of man-aging the Construction and Demolition Waste at end-of-life is between 33% and 39%. Ultimately, one evaluated CE proposed frameworks for the building industry based on 10R principles varia-tions. One presents an alternative framework for a circular strategy for the building industry that focuses on Upcycling, replacing the Recover principle.

With the increment of the aging population in recent years, neurodegenerative diseases exert a major global disease burden, essentially as a result of the lack of treatments that can stop the disease progression. Alzheimer’s Disease (AD) is an example of a neurodegenerative disease, that affects millions of people globally, with no effective treatment. Natural compounds have emerged as a viable therapy to fill a huge gap in AD management, and in recent years, mostly fuelled by the Covid-19 pandemic, RNA-based therapeutics have become a hot topic in the treatment of several diseases. Treatments of neurodegenerative diseases face significant limitations due to the complex and interconnected pathways that lead to their hallmarks and, also due to the necessity to cross the blood–brain barrier. Nanotechnology has contributed to surpass this bottleneck in the treatment of AD, by promoting safe and enhanced drug delivery to the brain. In particular, exosome-like nanoparticles, a hybrid delivery system combining exosomes and liposomes' advantageous features, are demonstrating great potential in the treatment of central nervous system diseases.

Hazelnut shells (HS), scientifically known as Corylus avellana L. shells, are a waste produced in companies that process nuts. The main objective of this study was to find an efficient way to maximize the chemical potential of HS by solubilizing the hemicelluloses, which could then be used to recover sugars and at the same time increase the lignin content of this material in order to produce adhesives or high strength foams. In order to optimize the pre-hydrolysis process, two different temperatures (160 and 170 C) and times varying from 15 to 180 min were tested. All the remaining solid materials were then liquefied by polyalcohols with acid catalysis. The chemical composition of hazelnut shells was determined before and after the pre-hydrolysis. All the process was monitored by FTIR-ATR by determining the spectra of solids and liquids after pre-hydrolisis and liquefactions steps. The highest solubilization of hazelnut shells was found for 170 C and 180 min, resulting in a 25.8% solubilization. Chemical analysis after the hydrolysis process showed a gradual increase in the solubilization of hemicelluloses as both the temperature and time of the reactor were increased. Simultaneously, the percentages of α-cellulose and lignin in the material also increased with rises in temperature and duration. FTIR-ATR allowed for the detection of significant spectral changes in the hazelnut shells from their initial state to the solid residue and further into the liquefied phase. This confirmed that pre-hydrolysis was effective in enhancing the chemical composition of the material, making it more suitable for the production of adhesives or polyurethane foams with enhanced mechanical strength.

Most recent university campuses follow the North American model, built on city limits or countryside, with large separate buildings in open green spaces. Studies suggest that prevalence and severity of mental health issues among university students are increasing over the past decade in most countries. University services were created to face this growing problem, however individual based interventions have limited effects on mental health and well-being of a large population. Our aim was to verify if and how the natural environment in Campuses is focused on programs to cope with the issue of mental health and well-being among students. Systematic review of literature was undertaken with search in Scopus and LILACS with the keywords “green areas” AND “well-being” AND “Campus”, following PRISMA guidelines. As a result, 32 articles were selected. Research on the topic is recent, mostly in the USA, Bulgaria, and China. Most studies used objective information on campuses’ greenness and/or university students’ perception. Mental health was usually measured by validated scores. Findings of all the studies indicated positive association between campus greenery and well-being of students. We conclude that there is a large potential for use of university campuses in programs and sites for students´ restoration and stress relief.

Climate change is expected to affect the agricultural sector in ways that are often unclear to predict. If in the short- medium-terms farmers may adapt to climate change by adjusting agricultural practices, in the long-term these adjustments may become insufficient, forcing farmers to change their farming systems. The extent and direction in which these farming system transitions will occur is still a subject underexplored in the literature. We propose a new framework to explore the marginal effect of climate change on the choice of the farming system, while controlling the effect of other drivers known to also influence farming system choice. Using a spatial-explicit farming system choice-model developed by a previous study in an extensive agricultural region of southern Portugal, we applied a space-for-time approach to simulate the effect of climate change on the future dynamics of the farming systems in the study area. Results suggest that climate change will force many farmers to change the farming system in a foreseeable future. The extent of the projected changes in farming systems is likely to trigger significant social, economic, or environmental impacts, which should require early attention from policy makers.

In this paper, the elemental construct of an I-shaped fin cooling a heat generating volume is studied through the entropy production perspective. Using the constructal design method framework with entropy production minimization as an objective leads to different optimal shape ratio, different from the ones obtained using the excess of temperature. Moreover, the optimal shape ratio evolution is not necessary the same for local entropy production minimization (excess of entropy production) and global entropy production (entropy produced in the whole area). Finally, an analysis on a possible dimensionless number is introduced for the study of constructal plates.

Urban gardens have important social, environmental and economic roles in big cities, contributing to their sustainability. However, food production in urban gardens may be compromised due to soil pollution that resulted from decades of industrial non-regulated environmental activity and mobile transport. In this study, 12 soils from the urban agricultural area of Rome (Italy) were analyzed for the metals Be, Ba, Pb, Co, Ni, V, Zn, Hg, Cd, As, Cu, and Cr. All but one of the soils under analysis were characterized by at least one metal concentration above the threshold limit defined by the Italian Legislative Decree 152/2006 (ILD) for agricultural soils. Multivariate analysis showed that the soils could be classified into five clusters: clusters I and II had relatively lower mean metal concentrations; clusters III, IV, and V had relatively higher mean metal concentrations with several metal concentrations above the threshold proposed by ILD. Three factors contributing to the variability of the metal’s concentration in the soils under investigation were identified: geological factor, related with metals As, Ba, Be, and V; anthropogenic factor, related with Pb and Cu; and, a mixed factor related with Co, Cr, Ni, and Zn. High metal content may limit the utilization of urban soils as urban gardens for food production.

Background: Demographic aging is a reality in developed countries, which poses a social challenge of great responsibility. Thus, numerous studies have been developed in an attempt to understand which factors best predict healthy aging. The aim of this study was to investigate and systematize literature on intervention programs that simultaneously include cognitive stimulation and physical activity, understand the importance of the use of new technology in these programs, and understand their impact on cognitive function in older adults, giving indications about their contribution to healthy aging. Methods: A narrative approach was used for extraction and synthesis of the data. Relevant studies were identified from electronic databases such as PubMed, Scopus, Web of Science and Academic Search Complete. Results: Thirty-two articles, involving 2815 participants, were identified. All selected studies were randomized controlled studies. The studies were published between 2011 and 2020. All studies included a combination of cognitive and physical interventions. Many of the studies used technology to administer the cognitive stimulation program. Conclusions: Most of the analyzed studies use new technologies in physical and cognitive interventions, demonstrating that this new form of intervention exerts lasting and stable benefits in cognition.

Polydimethylsiloxane (PDMS) is one of the most popular elastomers and has been used in different fields, especially in biomechanics research. Among the many interesting features of this material, its hyperelastic behaviour stands out, which allows the use of PDMS in various applications, like the ones that mimic soft tissues. However, the hyperelastic behaviour is not linear and needs detailed analysis, especially the characterization of shear strain. In this work, two approaches, numerical and experimental, were proposed to characterize the effect of shear strain on PDMS. The experimental method was implemented as a simple shear testing associated with 3D digital image correlation and was made using two specimens with two thicknesses of PDMS (2 and 4 mm). A finite element software was used to implement the numerical simulations, in which four different simulations using the Mooney-Rivlin, Yeoh, Gent, and Polynomial hyperelastic constitutive models were performed. These approaches showed that the maximum value of shear strain occurred in the central region of the PDMS, and higher values emerged for the 2 mm PDMS thickness. Qualitatively, in the central area of the specimen, the numerical and experimental results have similar behaviours and the values of shear strain are close. For higher values of displacement and thicknesses, the numerical simulation results move further away from experimental values.

Many neurodegenerative diseases are directly related to the formation of toxic protein aggregates, such as Parkinson’s and Alzheimer’s diseases, which are associated with the aggregation of alpha-synuclein (α-syn) and beta-amyloid (Aβ ), respectively. In this context, protein fibrils are the hallmark of these neurodegenerative diseases. In this sense, planning or designing compounds that are capable of preventing or reducing the formation of protein aggregation in the brain can be of fundamental importance for the curative treatment of these diseases. This work presents an in silico and experimental study to investigate the inhibitory potential of the ligands Octovespin (bioinspired by the wasp venom Polybia Occidentalis) and Fraternine-10 (bioinspired by the wasp venom Parachartergus fraternus wasp) against the aggregation of fibrils of the peptides Aβ(17-42) and α-syn, respectively. Using molecular docking and molecular dynamics simulations with 100 ns, the disaggregation capacity of these ligands was studied. The results obtained indicate that Octovespin and Fraternine-10 interact with the Aβ and α-syn protein fibrils throughout the simulation time. The RMSD values and the interactions with amino acids responsible for fibril aggregation demonstrate that both Octovespin and Fraternine-10 have a significant disaggregation potential, which corroborates the observations in vitro and in vivo. Furthermore, experimental results of Fraternine-10 demonstrate an anti-aggregation effect, indicating that it can promote the disaggregation of fibrils and prevent them from aggregating again to form oligomers. These discoveries qualify these molecules as potential candidates to become medicines against Parkinson’s and Alzheimer’s diseases.

Climate and land-use changes have been contributing to increase the occurrence of extreme wild-fires, shifting fire regimes and driving desertification, particularly in Mediterranean-climate regions. However, few studies have researched the effects of land-use change on fire regimes and carbon storage at the broad national scale. To address this gap, we used spatially explicit data from annual burned areas in mainland Portugal to build a typology of fire regimes based on the accumulated burned area and its temporal concentration (Gini index) between 1984 and 2019, which was combined with 2018 carbon stock data (above- and below-ground), and a landscape typology re-sulting from cluster analysis over land-use composition, diversity and configuration, to explore relationships between landscape types and the two major ecosystem services at stake: wildfire reduction and carbon stock. Cross tabulations, logistic and linear regressions were performed on these data and results revealed a strong relationship between landscapes dominated by maritime pine and eucalypt forest plantations and high-hazardous fire regime but hold the highest carbon stock. Shrubland-mixed landscapes were associated with lower carbon stocks but less hazardous fire regimes. Specialized agricultural landscapes, as well as mixed native forests and mixed agro-forestry landscapes, were the least associated with wildfires. In the case of agricultural landscapes however, this good wildfire performance is achieved at the cost of the poorest carbon stock, de-noting land degradation, whereas native forests and agroforestry landscapes strike the best trade-off between carbon stock and fire regime. Our findings support how nature-based solutions promoting wildfire mitigation and carbon stock ecosystem services may prevent and revert land degradation harming Mediterranean regions.

Primary energy consumption is one of the key drivers of global CO₂ emissions that, in turn, heavily depend on the efficiency of involved technologies. Either the improvement in technology efficiency or the expansion of non-fossil fuel consumption require large investments. The planning and financing of such investments, by policy makers or global energy firms, require, in turn, reliable measures of associated global spreads and their evolution in time. In this paper, our main contribution is the introduction of index measures for accessing global spreads (that is, measures of inequality or inhomogeneity in the statistical distribution of a related quantity of interest) of technology efficiency and CO₂ emission in primary energy consumption. These indexes are based on the Gini index, as used in economical sciences, and generalised entropy measures. Regarding primary energy sources, we consider petroleum, coal, natural gas and non-fossil fuels. Between our findings, we attest some stable relations in the evolution of global spreads of technology efficiency and CO₂ emission, and a positive relation between changes in global spreads of technology efficiency and use of non-fossil fuel.

Geoethics is a field of knowledge currently in full development. Researchers in geoethics are pri-marily concerned with the anthropogenic interaction with the Earth system. Due to its nature, ge-oethics holds particular importance in sustainable development due to its nature as it aims to promote ethical human behaviour that does not negatively impact the Earth system. In the present research, we implemented an intervention program addressing various issues related to the sus-tainability of the Earth system, such as the exploitation of geological resources, the management of geological risks, and the conservation and promotion of geopatrimony. The intervention program was applied to higher education students in the geosciences field. A sample of 90 students from various geosciences courses completed an initial questionnaire, revealing limited knowledge about geoethics. This study resorted to mixed-method research involving interviews with some students who volunteered (n=52). The results showed that after applying the intervention programme most students had developed a deeper understanding of the topics addressed and recognised the con-tributions this scientific area can make to sustainable development. Additional research in geoethics education is essential to foster the integration of geoethics into the curricula of higher education institutions.

The detection of hormones, pharmaceutical and personal care products (PPCPs), in aqueous complex media as water bodies is an urgent and mandatory matter because of its harmful impact on the environment. This work presents a sensor device which is able to detect trace of the synthetic hormone 17α-ethinylestradiol (EE2), in a range of concentration of 10-15 to 10-9 M in both mineral and tap waters. These types of water were studied due to their different degrees of complexity, which allow to attain a better understanding of EE2’s behavior and response in different media. The sensor body consists of solid supports having interdigitated electrodes without and with a thin film deposited on it, and device response is evaluated through impedance spectroscopy. The thin films were prepared by the layer-by-layer technique from aqueous solutions of polyethylenimine (PEI) and poly(sodium 4-styrenesulfonate) (PSS) polyelectrolytes. Results demonstrated that it is possible to discriminate clearly the different waters used and to detect EE2, obtained from the second principal component (PC2) as a result of the application of principal component analysis method, with a sensitivity of -0.072 ± 0.009 and -0.44 ± 0.03 per decade of concentration, for mineral and tap water, respectively. Detection limits values were found to be of 8.6 fM (2.6 pg/L) and of 7.5 fM (22.2 pg/L) for TW and MW, respectively and are lower than the ones found in literature. Moreover, the achieved constant proportionality between the PC2 values for each EE2 concentration reveals that one can use this methodology to quantify EE2 concentration in unknown aqueous complex matrices.

Hydrophilic coatings have recently emerged as a new approach to avoid the adhesion of (bio)organisms on surfaces immersed in water. In these coatings the hydrophilic character is crucial for the anti-fouling (AF) performance. However, this property can be rapidly lost due to the inevitable damages which occur at the surface, reducing the long-term effectiveness of the AF functionality. We report hydrophilic polycarbonate-mPEG polyurethane coatings with tunable hydrophilic properties as well as an excellent and long-term stability in water. The coatings exhibit low protein adhesion values and are able to self-replenish their hydrophilicity after damage, due to the existence of a reservoir of hydrophilic dangling chains incorporated in the bulk. The combination of low T_g and sufficient mobility of the mPEG dangling chains (enabled by chains with higher molecular weight) proved to be crucial to ensure autonomous surface hydrophilicity recovery when the coatings were immersed in water. This coatings and design approach offer new possibilities towards high performance AF coatings with an extended service life-time which can be used in several major applications areas, such as marine and biomedical coatings, with major economic and environmental benefits.

The links between rural and urban have often been the subject of study in Portugal. Nevertheless, the asymmetries between rural and urban have not ceased to increase over the last decades, contributing to an imbalance of economic, social, and territorial dimensions between regions. In order to counter this trend, policies to attract the population and tourism have been endorsed but have not been sufficient to promote territorial cohesion. This makes it necessary to rethink the capacity and the potential of rural territories in terms of mobilising their resources and, through them, promoting new and/or renewed relations with urban territories. This article aims to explore and map the links between urban and rural areas by analysing the routes taken by agri-food products, from production to marketing, with the support of a spatial analysis, using Geographic Information Systems (GIS). For that, we analysed a set of specialised and/or gourmet shops in Oorto and Lisbon, and their relations with the territories from which the commercialized agri-food products come. Most of these products originate in the inland rural regions of the country, and there is a clear geographical connection between the shops analysed and specific territories. Thus, it was possible to verify the increase in interest and consumption of agri-food products of rural origin and the spontaneous increase of this type of shop in the cities analysed, as well as identify the target audience of the shops and the spatial influence they have in the respective cities. These shops, in addition to selling agro-food products, are also promoters of rural territories in an urban environment.

ClinVar is a web platform that stores around 774k curated entries, which allows exploring genetic variants and their associations with complex phenotypes. A partial set of ClinVar’s genetic associations were reported with conflict of interpretation or uncertain clinical impact significance, which currently challenges clinicians and geneticists. Here, we evaluate the performance of data pre-processing methods combined with classical prediction methods, such as Naive Bayes, Random Forest, and Support Vector Machine to build a meta-prediction model aiming to improve genetic pathogenicity interpretation. Models were trained with ClinVar data (September 2020), and genetic variants were annotated with eight functional impact predictors catalogued with SnpEff/SnpSift (v4.3). A 10-fold cross-validation strategy was performed for evaluation by accuracy, F1-Score, Receiver Operating Characteristic, Area Under Curve. The best meta-prediction model raises by combining one-hot encoding with tree-based classifiers as Random Forest, which shows Area Under Curve ≥ 0,93. We predict pathogenicity for 109k genetic variants, which were found labeled as uncertain significance or conflict of interpretation. Additionally, we implemented AmazonForest (https://www.lghm.ufpa.br/amazonforest), a web tool to query data for a set of 5k variants that were predicted with high pathogenic probability (RFprob >= 0.9).

Background: Alzheimer's Disease (AD) is a progressive and incurable condition that prompts the exploration of interventions to slow its advancement and enhance the quality of life. The cortical brain waves could have a role in the process of executive function deterioration, increasing dementia symptoms. Objective: To interrogate the effects of physical exercise, and non-invasive brain stimulation, both in electrophysiological behavior of the brain, the executive functions, and dementia symptoms in older adults with AD. Methods: One hundred and sixteen older adults were grouped (n=22 each): GAE (AD, PMED+NIBS), GCP (AD, PMED), GCN (AD, NIBS), GCS (control, no intervention). Binaural beats were used as a non-invasive brain stimulation, physical exercise, or both, were applied during 16 weeks. Pre/post measurements included Alpha Band, and SMR Rhythms, executive functions, and dementia symptoms. Results: GCS showed no significant changes (p>0.05). GCN and GCS slightly enhanced inhibitory control (p>0.05) and working memory (p>0.05). In contrast, GCP and GAE improved executive function (p

Molecular studies regarding regulatory elements such as small ncRNAs and their mechanisms are poorly understood in infectious diseases. Tuberculosis is one of the oldest infectious diseases of humanity, and it is still a challenge to prevent and treat it. The control of the infection as well as its diagnosis are still complex, and treatments used are linked to several side effects. This study aimed to investigate miRNA’s expression profile to identify possible biomarkers for tuberculosis. We applied NGS techniques to investigate miRNA’s global expression profile from blood samples of infected patients with tuberculosis, their respective healthy physicians, and external healthy individuals as controls. Samples from 22 individuals run through a differential expression, target genes, gene set enrichment, and miRNA-gene network analysis. We observed 153 altered miRNAs, among which, only three DEmiRNAs (hsa-let-7g-5p, hsa-miR-486-3p and hsa-miR-4732-5p) were found between the investigated patients and their respective physicians. These DEmiRNAs are suggested to play an important role in granuloma regulation and their immune physiopathology. Our results propose that miRNAs may be involved in immune modulation, regulating the repertoire of genes expressed in the immune system’s cells. Our findings encourage the application of miRNAs as potential biomarkers for tuberculosis.

The Neotropical region is one of the most diverse regions of the globe in terms of macro-organismic species. Regarding the microbial world, however, little is known about the diversity and biogeography patterns of micro-organisms in the Neotropics. In this context, the study of several microbial taxonomic groups is still missing and/or incomplete, such as the protists. Our goal here was to summarize the available information of Neotropical protists, focusing on molecular data from environmental continental samples, to explore what these data evidence on their ecology and biogeography. For this, we reviewed the findings from all articles that focused on or included the terrestrial protists using metabarcoding approach and identified the gaps and future perspectives in this research field. We found that Neotropical protists diversity patterns seem to be, at least in part, congruent with that of macro-organisms and, different than plants and bacteria, just weakly explained by environmental variables. We argue that studies with standardized protocols including different biomes are necessary to fully characterize the ecology and biogeography on Neotropical protists. Furthermore, dismember evolutionary lineages and functional guilds of protists are important to better understand the relationship between diversity, dispersal abilities and functionality of particular taxa of protists in their habitats.

Understanding how humans perceive animals is important for biodiversity conservation, however, only a few studies about this issue were carried out in South America. We selected two Brazilian cities to assess people’s perceptions of birds: Bauru (São Paulo, Brazil) and Belo Horizonte (Minas Gerais, Brazil). From the bird data we gathered, we developed a questionnaire and applied it between September 2020 and June 2021. The data obtained were analyzed by simple counts, Likert scale, and percentages. Also, open questions were placed on the Free Word Cloud Generator website. Our study confirmed that most respondents are aware of the importance of birds to ecological balance and that respondents had a generally positive attitude towards most of the bird species. However, they disliked exotic species such as the Domestic Dove and the House Sparrow, which are associated with disease, dirt, and disgust. Respondents also underestimated the number of birds that can live in urban areas and the song of birds is still a sense less explored and perceived by people. The concept of environmental perception seeks to cover aspects and understanding these human–biodiversity relationships is essential to successfully guide public policies, urban planning interventions, and environmental education activities.

Despite much published literature on the impacts of agriculture on water quality, knowledge gaps persist regarding which farming systems are of most concern for these relationships, which could help water resource planners better target water management efforts. This study addresses these subjects, seeking to understand how this relationship varies across different farming systems. We used data on water quality status in watersheds of an agricultural region in southern Portugal and crossed it with a map of farming systems for the same region provided by a previous study. By overlaying both data layers, we characterized the areal shares of the farming systems in the watersheds and inspected how these shares relate with water quality status through logistic regression. Results support that the impact of agriculture on water quality is mostly related with specific farming systems. We believe this type of information can be of high interest for agricultural planners and policymakers interested in meeting water quality standards, and we conclude by suggesting innovative policy options based on payments to farmers operating selected farming systems, as a cost-effective way to reconcile agricultural and environmental policy objectives.

A detailed structural investigation of a promising bio-based polymer, polyglycerol citrate poly-ester, obtained by bulk polycondensation of glycerol (Gly) against citric acid (Cit) under mild reaction was performed. This polymer was suggested to be well suited for coating seeds or similar agricultural applications. The reaction in conditions with and without catalyst use (sulfuric acid, H2SO4) was investigated, showing evidence that it is possible to modify the polymer solubility according to the ratio and catalyst utilization. 13C and 1H NMR indicated that synthesis catalyzed with Cit excess leads to higher esterification degrees of citrates groups. In contrast, the Gly moi-eties are more prominent in catalyzed polymers regardless of the excess monomers. Overall, a successful conversion of Gly and Cit into polyesters was attained, even without catalysis, enabling a simple route for large-scale production of this green material to be used as coating material. Tests on soybean seed coating with a PGCit solution of 75% indicated that the seed quality and ger-mination rate was not affected by PGCit coating, concluding that this polymer is promising for this application.

Drought events are evident effects of climate change around the globe and yield several socio-economic impacts. Such effects are even more relevant for South America (SA) since different activities essential for the continent, like agriculture and energy generation, depend highly on water resources. Thus, this study aimed to evaluate future changes in precipitation and hydro-logical droughts occurrence in SA through climate projections from eight global climate models (GCMs) of CMIP6. To this end, statistical downscaling was applied to the projections with the Quantile Delta Mapping technique, and the method proved to be efficient in reducing systematic biases and preserving GCMs’ trends. For the following decades, the results show considerable and statistically significant reductions in precipitation over most of SA, especially during the austral spring, with the most intense signal under the SSP5-8.5 forcing scenario. Furthermore, GCMs showed mixed signals about projections of the frequency and intensity of drought events. Still, they indicated agreement regarding the increase in duration and severity of events over all of SA and a substantial proportion of moderate and severe events over most of Brazil during the 21st century. These results can be helpful for better management of water resources by deci-sion-makers and energy planners.

Cancer is among the leading causes of death worldwide. Therefore, timely diagnosis and appropriate treatment are very important. There are many disadvantages that come with traditional cancer treatments, such as chemotherapy and radiotherapy. In these treatments, the specific drug concentration affects not only the tumor site but also healthy tissues or organs. One of the foremost promising uses of nanotechnology is in the field of medical technology and specific site targeting can be achieved due to manipulation of materials at a nanometric scale. Nanotechnology offers specific benefits in terms of cancer therapy by enhancing it and reducing its adverse effects by guiding drugs to selectively target cancer cells. In addition, the use of minute amounts of medicine can lead to cost savings. Furthermore, nanoparticles can also be used as imaging agents to improve cancer diagnostics, therapeutics, and treatment management. Thus, this review has focused on the different types of nanoparticles used in cancer therapy, their action mechanisms, and their benefits and applications in diagnosis, imaging, and treatment. This review sums up the parameters that need to be considered when designing systems for cancer therapy while considering the desired characteristics of the nanoparticles from the biological point of view.

Water quality assessment stands as a fundamental step in water resource management. In addition to substances and organisms present in the water, land use and land cover are two factors affecting also water quality. This study analyzed the correlation and influence between water quality and land use and land cover in the Miranda River Basin (MRB) and the natural wetlands in the Pantanal Biome. Using a watershed-wide approach, results suggested that water quality management policies can be considered in terms of sub-basins (smaller planning units). The Water Quality Index (WQI) was considered GOOD or EXCELLENT throughout the MRB. It was observed that the natural wetlands have the capacity to contribute to improve WQI, with reductions in thermotolerant coliforms and turbidity; however, high values were found for thermotolerant coliforms, a temporal increasing trend of biochemical oxygen demand (BOD), and a reduction in dissolved oxygen and total phosphorus. Conversely, it was found in these flooded areas a trend of decrease in dissolved oxygen and an increase in BOD concentrations. Natural wetlands play important hydrological and ecological roles in water quality, storing, removing, and cycling nutrients. They are highly relevant areas for defining watershed management and conservation strategies, environmental protection, and providing ecosystem services.

The Pandemic in 2019 forced a digital adaptation with direct consequences on all educational stakeholders. On behalf of teachers and trainers, while many regarded these changes with some scepticism, others embraced the opportunity to integrate technology into their teaching methods and as learning resources. As translation trainers, it is essential to follow and understand the translation market. Thus, the exponential changes that digital technology has brought to this sector over the years impose constant shifts in teaching and learning methods and resources. In fact, translators require vast competencies, amongst which is the flexibility to adapt. In translation training Project-Based Learning (PBL) has been established as an essential teaching and learning method, as it has proven to foster the development of competencies as it simulates the translator's work environment. Thus, the need to adapt new strategies reinforced PBL and its benefits. PBL, however, similar to a freelance translator, places the student in the centre of the learning process, where self-regulation becomes essential, as it is necessary to analyse the market/situation and be flexible enough to adapt to the context accordingly. As of 2018-2019, technical translation courses at ISCAP have implemented PBL as their main teaching and learning method. At the same time, a study on student self-regulation began. The purpose was to understand student perception on their own self-regulation competence and its development or lack thereof after one year of PBL. Results indicate that PBL is seen as a useful simulation of the translation labour market and that it does enhance many essential competences, amongst which is student self-regulation.

Beef dry aging consist in a selection of unpackaged primal cuts that are placed in a refrigerator room with controlled environment for several weeks. The goals are the concentration of flavor, like nutty and beefy and tenderness improvement. In this study it was intended verify the microbiological and physicochemical behavior and the meat sensorial perception during a process example of meat dry aging. Twelve beef loins were selected for 90 days of dry aging and placed in a refrigerator room with average temperature, relative humidity and forced air 3.17 ± 0.68 °C, 60.65 ± 4.23 % and 0.5-2 m/s, respectively. On 1, 14, 21, 35, 60 and 90 days of dry aging, were taken two samples, crust and lean meat for microbiological counts, pH, aw, color L*a*b* and sensorial analysis. During drying, there weren´t any pathogenic bacteria counts and the average counts were higher for the crust. The aw and pH had an average of 0.98 ± 0.02 and 5.77± 0.015, with a slightly decrease and increase respectively (P&lt;0.05) along aging days. The dry aging process practices, with room refrigeration at RH&lt;65.00% and temperature &lt;4.00 °C can be the reason for aw&lt;0.98 and meat pH&lt;6.00 and therefore for the absence of pathogenic bacteria. The lower microbial counts on the lean meat and the overall acceptability assessed by the sensory panel confirm the importance of the good trimming and storage practices for the dry aged beef.

The proliferation and survival signals emanating from the B-cell receptor (BCR) constitute a crucial aspect of mature lymphocyte’s life. Dysregulated BCR signaling is considered a potent contributor to tumor survival in different subtypes of B cell non-Hodgkin lymphomas (B-NHLs). In the last decade, emergence of BCR-associated kinases as rational therapeutic targets has led to the development and approval of several small molecule inhibitors targeting either Bruton's tyrosine kinase (BTK), spleen tyrosine kinase (SYK), or phosphatidylinositol 3 kinase (PI3K), offering alternative treatment options to standard chemoimmunotherapy, and making some of these drugs valuable assets in the anti-lymphoma armamentarium. Despite their initial effectiveness, these precision medicine strategies are limited by primary resistance in aggressive B-cell lymphoma like diffuse large B cell lymphoma (DLBCL) and mantle cell lymphoma (MCL), especially in the case of first generation BTK inhibitors. In these patients, BCR-targeting drugs often fail to produce durable responses, and nearly all cases eventually progress with a dismal outcome, due to secondary resistance. This review will discuss our current understanding of the role of antigen-dependent and antigen-independent BCR signaling in DLBCL and MCL and will cover both approved inhibitors and investigational molecules being evaluated in early preclinical studies. We will discuss how the mechanisms of action of these molecules, and their off/on-target effects can influence their effectiveness and lead to toxicity, and how our actual knowledge supports the development of more specific inhibitors and new, rationally based, combination therapies, for the management of MCL and DLBCL patients.

Commercial buildings are a significant consumer of energy worldwide. Logistics facilities, and specifically warehouses, are a common building type yet under-researched in the demand-side energy forecasting literature. Warehouses have an idiosyncratic profile when compared to other commercial and industrial buildings with a significant reliance on a small number of energy systems. As such, warehouse owners and operators are increasingly entering in to energy performance contracts with energy service companies (ESCOs) to minimise environmental impact, reduce costs, and improve competitiveness. ESCOs and warehouse owners and operators require accurate forecasts of their energy consumption so that precautionary and mitigation measures can be taken. This paper explores the performance of three machine learning models (Support Vector Regression (SVR), Random Forest, and Extreme Gradient Boosting (XGBoost)), three deep learning models (Recurrent Neural Networks (RNN), Long Short-Term Memory (LSTM), and Gated Recurrent Unit (GRU)), and a classical time series model, Autoregressive Integrated Moving Average (ARIMA) for predicting daily energy consumption. The dataset comprises 8,040 records generated over an 11-month period from January to November 2020 from a non-refrigerated logistics facility located in Ireland. The grid search method was used to identify the best configurations for each model. The proposed XGBoost models outperform other models for both very short load forecasting (VSTLF) and short term load forecasting (STLF); the ARIMA model performed the worst.

Master Valentim’s fountain became an important historical patrimony for Brazil, being portrayed by famous artists among them Jean-Baptiste Debret. In 1938, it was registered as cultural heritage by the Brazilian National Historical and Artistic Heritage Institute (IPHAN), and in 1990 it was subjected to excavation and restoration works. The fountain was built in Gneiss and Lioz limestone, with metallic plates and mortar connecting the Gneiss blocks. Currently, deteriorations in the fountain stones can be observed such as light stains and some aesthetic modifications caused by inadequate restorations. Petrography, XRF, XRD, Physical Properties, Colorimetry, Electrical Conductivity, ICP-OES, SEM-EDX, and TGA were performed in order to characterize the Gneiss blocks, the metallic plates, the stones used in previous restorations, as well as light stains observed on the Gneiss blocks. The petrography and XRD analyses inferred that light stains may have been caused by the formation of an insoluble salt as a result of the association of the lead from the plates with other elements. The XRD analysis on the light staining area indicated presence of cerussite (PbCO₃), and anglesite (PbSO₄), which are the probable cause of the light stains. The SEM-EDX results suggested that sulfur is the main element associated to lead.

We hypothesized that biofilm production occurs on stainless steel when incubated with tissue specimens in thioglycolate broth media (TBM). In a diabetic foot infection (DFI) cohort, applying the Kirschner wire and conventional methods were more sensitive than applying only the latter (CI 90%; 0.167 versus 0.375).

The term Concept has been a prominent part of investigations in psychology and neurobiology where, mostly, it is mathematically or theoretically represented. The Concepts are also studied computationally through their symbolic, distributed and hybrid representations. The majority of these approaches focused on addressing concrete concepts notion, but the view of the abstract concept is rarely explored. Moreover, most computational approaches have a predefined structure or configurations. The proposed method, Regulated Activation Network (RAN), has an evolving topology and learns representations of Abstract Concepts by exploiting the geometrical view of Concepts, without supervision. In the article, the IRIS data was used to demonstrate: the RAN's modeling; flexibility in concept identifier choice; and deep hierarchy generation. Data from IoT's Human Activity Recognition problem is used to show automatic identification of alike classes as abstract concepts. The evaluation of RAN with 8 UCI benchmarks and the comparisons with 5 Machine Learning models establishes the RANs credibility as a classifier. The classification operation also proved the RAN's hypothesis of abstract concept representation. The experiments demonstrate the RANs ability to simulate psychological processes (like concept creation and learning) and carry out effective classification irrespective of training data size.

In this paper, we gave an attack on RSA when Euler function has small multiplicative inverse modulo "e" and the prime sum p+q is of the form p+q=2^nk_0+k_1 where n is a given positive integer and k_0 and k_1 are two suitably small unknown integers using sublattice reduction techniques and Coppersmith's methods for finding small roots of modular polynomial equations. When we compare this method with an approach using lattice based techniques, this procedure slightly improves the bound and reduces the lattice dimension.

Electroluminescence (EL) is an innovative technology in the lighting area. The EL device's main structure consists of a phosphor layer sandwiched by two electrodes. In this work, several alternating current EL devices have been developed by applying a set of sequential layers with combinations of in-house prepared inks and commercially available ink as a phosphor layer. A flexible polyester textile substrate was functionalized with inks by spray coating technique, after knife-coated an interfacial layer directly on the surface. A thorough study was carried out on the phosphor layer composition to optimize the EL device performance, more precisely the illuminance intensity and the illuminance homogeneity. The developed phosphor layer was composed of zinc sulphide doped with copper (between 30.0 to 38.1 wt%) and diluted by using a diluent at different ratios (28.0 to 35.5 wt%). The best peak illuminance intensity of 61 lux was obtained when the phosphor ink presented 35.4% ZnS:Cu and was diluted with 33.0% diluent. The aim of this study to determine the best formulation of the phosphor layer, which can be highly promising for further developments of EL devices, taking in account different applications in market.

Stress is an inherent sensation of being unable to handle demands and occurrences. If not properly managed, stress can develop into a chronic condition, leading to the onset of additional chronic health issues like cardiovascular illnesses and diabetes. Various stress meters have been suggested in the past, along with diverse approaches for its estimate. However, in the case of more serious health issues such as hypertension and diabetes, the results can be significantly improved. This study presents the design and implementation of a distributed wearable sensor computing platform with multiple channels. The platform aims to estimate stress levels in diabetes patients by utilizing a fuzzy logic algorithm that is based on the assessment of several physiological indicators. Additionally, a mobile application was created to monitor users' stress levels and integrate data on their blood pressure and blood glucose levels. Validation experiments were performed on patients with chronic diabetes, and the initial findings are presented in the study.

Drive tourism (DT) have become an attractive way of tourist destination for an increasing number of visitors along driving routes. This flow of visitors has made sustainability a major issue that is, the way by which tourism development ensure economic benefits for local communities and preserves local identity, along the route, without compromising the environmental resources. Many studies focused the topic of DT, mainly the analysis of a particular angle, either be economic sustainability, e.g., advantages of the ones related to economic and environment sustainability [e.g., 2,4,5,10], such as the impact of tourists along the route environment. Nevertheless, little attention has been paid to the social consequences of DT in the local entrepreneurial environment and ensuing over enhancing of their cultural representativeness in terms of authenticity. Our aim is to summon these points of view and achieve, through a systematic literature review, a clear and integrative picture of the driving tourism impacts in terms of sustainability along the routes throughout local communities. A systematic literature review was performed using the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) methodology. This systematic literature review sought to consolidate knowledge on the subject. In order to illustrate the link between major categories and their corresponding trends, authors used VOSviewer scientific software. The gathering of existing knowledge around the three components of sustainability highlighted the importance of community involvement and collaboration among DT stakeholders to ensure a trade-off between the protection and promotion of DT routes. Opportunities for future studies are suggested.

The use of smartphones, coupled with different sensors, makes it an attractive solution for measuring different physical and physiological features, allowing for the monitoring of various parameters and even identifying some diseases. The BITalino device allows the use of different sensors, including Electroencephalography (EEG) and Electrocardiography (ECG) sensors, to study different health parameters. With these devices, the acquisition of signals is straightforward, and it is possible to connect them using a Bluetooth connection. With the acquired data, it is possible to measure parameters such as calculating the QRS complex and its variation with ECG data to control the individual's heartbeat. Similarly, by using the EEG sensor one could analyze the individual's brain activity and frequency. The purpose of this paper is to present a method for recognition of the diseases related to ECG and EEG data, with sensors available in off-the-shelf mobile devices and sensors connected to a BITalino device. The data were collected during the elderly's experiences, performing the Timed-Up and Go test, and the different diseases found in the sample in the study. The data were analyzed, and the following features were extracted from the ECG, including heart rate, heart rate variability, the average QRS interval, the average R-R interval, and the average R-S interval, and the EEG, including frequency and variability. Finally, the diseases are correlated with different parameters, proving that there are relations between the individuals and the different health conditions.

The use of nitrogen fertilizers can be a source of environmental pollution; the use of or-ganomineral fertilizers can become a nutritional source for crops, ensuring sustainability in the production system. Another alternative approach is through the inoculation and co-inoculation of microorganisms. The objective was to evaluate the development, nutrition, and agronomic yield of common bean through fertilization with organomineral formula "FMO" derived from sewage sludge biosolids, combined with Rhizobium tropici inoculation and co-inoculation with Azospirillum brasilense techniques. Three bean cultivars from different commercial groups, Pérola, BRS Esteio, and BRS Pitanga, were tested. They were subjected to organomineral fertilizer application, orga-nomineral fertilizer application combined with seed inoculation with R. tropici and re-inoculation; seed co-inoculation with R. tropici + A. brasilense prior to sowing, and foliar re-inoculation with R. tropici + A. brasilense. Seed inoculation, combined with foliar re-inoculation at the V4 stage, resulted in higher productivity of common bean. The combination of R. tropici with co-inoculation with A. brasilense generally led to increased productivity compared to mineral nitrogen fertilization. The use of organomineral fertilizer alone enabled gains in development, as well as productivity. The Pérola bean cultivar showed better adaptation to the applied treatments.

The present article discusses the institutional model adopted in Brazil regarding energy production through biomass. The theoretical-empirical method is used to conclude that the model's difficulties can be overcome by adopting a network of contracts capable of subjecting renewable energy generation to an energy compensation model.

Astrocytes have been implicated in a wide range of neurodegenerative diseases, with the literature indicating harmful or beneficial roles on a case-by-case basis. On such conditions, these cells are capable of secreting several inflammatory factors and also promote synapse elimination and remodeling. These responses are possible because they sense their surroundings via several receptors, including metabotropic glutamate receptor (mGluR5). However, mGluR5 activation in astrocytes under neuroinflammatory conditions can be neuroprotective or have the opposite effect. In this work, we investigated the role of mGluR5 in hiPSC-derived astrocytes subjected to pro-inflammatory stimulation by recombinant TNF-α (rTNF-α). Our results show that mGluR5 blockade by CTEP is capable of reducing pro-inflammatory cytokines (IL-6, IL-8 and TNF-α) release in rTNF-α-stimulated astrocytes, but, in contrast, leads to an augmented expression of the pan-reactive marker SERPINA3. Additionally, CTEP enhances synaptoneurosomes phagocytosis by astrocytes in both non-stimulated and TNF-α-stimulated conditions, indicating that mGluR5 blockade alone is enough to drive synaptic material engulfment. Finally, mGluR5 antagonism as well as rTNF-α stimulation leads to a reduction in the expression of synaptogenic molecules. Altogether, these data suggest a complex role for mGluR5 in human astrocytes, since its blockage may have beneficial and detrimental effects under inflammatory conditions.

Linear programming formulations of forest ecosystem management (FEM) problems proposed in the 60s have been adapted and improved upon over the years. Generating management alternatives for forest management planning is a key step in building these models. Global forests are diverse, and a variety of models have been developed to simulate management alternatives. Climate change has made forest management calculations even more complex, requiring flexibility, diverse parameters, models, and methods. Despite this complexity, consistent concepts can be applied in developing management alternatives for forest management planning. This work describes iGen, a flexible forest prescription generator that applies the AI technique Rule-Based System (AI-RBS). iGen projects the state and associated inputs and outputs for a set of management units using rules from its knowledge base. An Inference Engine uses the rules to simulate a set of prescriptions in a tree-like graph structure. Without needing IT specialists, forest managers can describe the potential development of their forest through variables, rules, formulas, functions, and procedures. A key feature of iGen is that it is not limited to, adapted to, or focused on any specific region, landscape, forest condition, projection method, or yield function. Instead, it aims to maximize generality, enabling it to address a broad range of FEM problems. This article introduces iGen, explaining its concepts, structure, and algorithms through two FEM problems: natural regeneration with shelterwood harvests and plantation/coppice. For data and iGen source programs, visit github.com/…/iGen.

Cryptosporidium parvum is one of the major causes of neonatal calf diarrhoea resulting in reduced farm productivity and compromised animal welfare worldwide. Livestock act as a major reservoir of this parasite, which can be transmitted to humans directly and/or indirectly, posing a public health risk. Research reports on Cryptosporidium prevalence from the east Mediterranean region are scarce with even less originating from Cyprus. This study is the first to explore occurrence of Cryptosporidium spp. in young dairy calves on the island. A total of 242 faecal samples were collected from 10 dairy cattle farms in Cyprus, all of which were screened for Cryptosporidium spp. using nested-PCR amplification targeting the small subunit of the ribosomal RNA (18S rRNA) gene. The 60 kDa glycoprotein (gp60) gene was also sequenced for the samples identified as C. parvum positive to determine the subtypes present. Occurrence of Cryptosporidium was 43.8% (106/242) with at least one positive isolate in each farm sampled. Prevalence per farm ranged from 20¬‒64%, while C. bovis, C. ryanae and C. parvum were the only species identified. Amongst those, the latter was the predominant species, representing 51.8% of all positive samples. Four zoonotic subtypes were identified – IIaA14G1R1, IIaA15G1R1, IIaA15G2R1 and IIaA18G2R1. IIaA14G1R1 was the most abundant; representing 48.2% of all C. parvum positive samples and was also the most widespread. This is the first report of zoonotic subtypes of C. parvum circulating in Cyprus. These results highlight the need for further research into the parasite focusing on its diversity, prevalence, host-range and transmission dynamics on the island.

The plants Agave sisalana (sisal) and Punica granatum (pomegranate) are rich in saponins, which are secondary metabolites known for their therapeutic properties, including anti-inflammatory effects. Although, Brazil is the world's leading sisal producer, approximately 95% of the leaves are discarded after fiber extraction. Similarly, pomegranate peel waste is abundant in Brazil. To address the need for safe and effective anti-inflammatory treatments. This study aimed to create a topical mucoadhesive gel containing a combination of sisal (RS) and pomegranate residue ex-tracts (PR). In vitro experiments examined isolated and combined extracts, as well as the result-ing formulation, focusing on: 1) phytochemical analysis (total saponin content); 2) cytotoxicity (MTT assay); and 3) pharmacological assessment of anti-inflammatory activity (phagocytosis, macrophage spreading, and membrane stability).Results revealed saponin concentrations in grams per 100 grams of dry extract as follows: SR - 29.91 ± 0.33, PR - 15.83 ± 0.93, Association (A) - 22.99 ± 0.01, Gel Base (G1) - 0.00 ± 0.00, and Association Gel (G2) - 0.52 ± 0.05. In MTT tests for isolated extracts, cytotoxicity values (µg/mL) were 3757.00 for SR and 2064.91 for PR. Converse-ly, A and G2 exhibited no cytotoxicity, with increased cell viability over time. All three anti-inflammatory tests confirmed the presence of this activity in SR, PR, and A. Notably, G2 demon-strated an anti-inflammatory effect comparable to dexamethasone.In conclusion, the gel contain-ing SR and PR holds promise as a novel herbal anti-inflammatory treatment. Its development could yield economic, social, and environmental benefits by utilizing discarded materials in Brazil.

The objective was to compare the color match and color stability behavior of single and multishade resin-based composites (RBCs) used for direct restorations. This review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Randomized clinical trials evaluating the shade performance of single-shade RBCs in direct restorations were included. A search of the scientific literature was performed in 5 databases (April 2024). The meta-analysis was performed using RevMan 5.4, calculating the risk difference (RD) and 95% confidence interval (CI) of the dichotomous outcome using a random effects model. Bias was assessed using the RoB 2.0 tool, and certainty of evidence was assessed using the GRADE tool. Four studies with 263 restorations analyzed were selected. The results showed comparable performance between single-shade RBCs and multishade RBCs in terms of color match and color stability over 12 months. Three studies had a low risk of bias with all expected results, and one study had some concerns. The certainty of evidence for color stability was considered low for all follow-up periods due to the small number of events and sample size. According to the United States Public Health Service Evaluation (USPHS) and the World Dental Federation (FDI), there is comparable clinical color performance between single-shade and multishade RBCs over 12 months.

Thoracic aortic calcium (TAC) appears to be a subclinical marker of cardiovascular disease (CVD) and to predict CV mortality. However, studies on TAC use tomographic scans obtained for coronary artery calcium (CAC) score, which does not include the aortic arch. This study evaluates TAC prevalence in aortic arch (AAC), ascending (ATAC) and descending thoracic aorta (DTAC) and verify whether they are associated with the same CV risk factors. Cross-sectional analysis, including 2,427 participants (mean age 55.6 ± 8.7; 54,1% women) of the ELSA-Brasil cohort. Nonenhanced ECG-gated tomographies were performed in 2015-2016. Multivariable logistic regression estimated the CV risk factors associated with calcium in each segment. Overall prevalence of ATAC, AAC and DTAC was, 23,1%, 62.1%, and 31.2%, respectively. About 90.4% of the individuals with TAC had AAC and only 19.5% had calcium in all segments. In the multivariable analysis, increasing age, lower levels of schooling, current smoking, higher body mass index, and hypertension remained associated with calcium in all segments. No sex or race/ethnicity differences were found in any aortic segment. Diabetes and Dyslipidemia were associated with ATAC and DTAC, but not with AAC, suggesting that AAC may reflect an overlap of mechanisms that impact vascular health, including atherosclerosis.

Turner syndrome (TS) is caused by a complete or partial absence of an X or Y chromosome, including chromosomal mosaicism, affecting 1 in 2,500 female live births. Sister chromatid exchange (SCE) is used as a sensitive indicator of spontaneous chromosome instability. Cells from mosaic patients constitute useful material for SCE evaluations as they grow under the influence of the same genetic background and endogenous and exogenous factors. We evaluated proliferation dynamics and SCE frequencies of 45,X and 46,XN cells of 17 mosaic TS patients. In two participants, 45,X cells exhibited a proliferative disadvantage in relation to 46,XN cells after 72h of cultivation. The analysis of mean PI showed significant differences between 45,X and 46,XN lineages; however there were no intraindividual differences. On the other hand, mean SCE frequencies showed no differences between the two lineages, but there were intraindividual differences in 5 patients. The absence of mean SCE frequency differences between 45,X and 46,XN lineages may indicate that both were equally unstable, as more than 70% of the 46,XN lineages had an anomalous karyotype. However, 46,XN had a higher mean PI, suggesting that the amount of cells with a karyotype distinct from 45,X may increase with time in mosaic TS women.

Cryptosporidium is comprised an apicomplexan parasitic protist, which infects a wide range of hosts, causing cryptosporidiosis. In cattle farms, the incidence of cryptosporidiosis results in high mortality in calves leading to considerable economic loss in the livestock industry. Infected animals may also act as a major reservoir of Cryptosporidium spp., in particular C. parvum, the most common cause of cryptosporidiosis in calves. This poses a significant risk to other farms via breeding centres, to trading of livestock and to human health. This study, funded by the Interreg-2-seas programme, is a part of a global project aimed at strategies to tackle cryptosporidiosis. To reach this target, it was essential to determine whether prevalence was dependent on the studied countries or if the issue was borderless. Indeed, C. parvum occurrence was assessed across dairy farms in certain regions of Belgium, France and the Netherlands. At the same time, the animal-to-animal transmission of the circulating C. parvum subtypes was studied. To accomplish this, 1084 faecal samples, corresponding to 57 dairy-farms from all three countries, were analysed. Well-established protocols amplifying the 18S rDNA and gp60 genes fragments, followed by DNA sequencing, were used for the detection and subtyping C. parvum; the DNA sequences obtained were further characterised using a combination of bioinformatics and phylogenetics methods. Our results show 25.7%, 24.9% and 20.8% prevalence of Cryptosporidium spp. in Belgium, France and the Netherlands respectively. Overall, 93% of the farms were Cryptosporidium positive. The gp60 subtyping demonstrated a significant number of the C. parvum positives belonged to the IIa allelic family, which has been also detected in humans. Consequently, this study highlights how widespread is C. parvum in dairy farms and endorses cattle as a major carrier of zoonotic C. parvum subtypes, which subsequently pose a significant threat to human health.

This review delves into the pivotal role of green manure in advancing agricultural sustainability and enhancing soil fertility. It emphasizes the wide-ranging ecological benefits of green manure practices, particularly in tropical regions, where it fosters multiple biological processes such as nitrogen fixation and nutrient cycling. The text provides an in-depth exploration of specific green manure species, their characteristics, practical considerations, and the physical, biological, and chemical effects they have on soil. It also discusses the practical implementation of green manure techniques, including cropping, intercropping, and strip or alley cultivation. The study emphasizes the critical need for species selection and effective green manure management, shedding light on their profound impact on crop productivity and environmental sustainability. With comprehensive details on various species and their practical implications, the study offers a comprehensive understanding of green manure's potential as an alternative source to mineral fertilizers in tropical agriculture.

To minimise environmental impact, avoid regulatory penalties, and improve competitiveness, energy-intensive manufacturing firms require accurate forecasts of their energy consumption so that precautionary and mitigation measures can be taken. Deep learning is widely touted as a superior analytical technique to traditional artificial neural networks, machine learning, and other classical time series models due to its high dimensionality and problem solving capabilities. Despite this, research on its application in demand-side energy forecasting is limited. We compare two benchmarks (Autoregressive Integrated Moving Average (ARIMA), and an existing manual technique used at the case site) against three deep learning models (simple Recurrent Neural Networks (RNN), Long Short-Term Memory (LSTM), and Gated Recurrent Unit (GRU)) and three machine learning models (Support Vector Regression (SVM), Random Forest, and K-Nearest Neighbors (KNN)) for short term load forecasting (STLF) using data from a Brazilian thermoplastic resin manufacturing plant. We use the grid search method to identify the best configurations for each model, and then use Diebold-Mariano testing to confirm the results. Results suggests that the legacy approach used at the case site is the worst performing, and that the GRU model outperformed all other models tested.

The global movement of inputs, raw materials, products, and the marketing of products requires the use of supply chains. Green logistics refers to the set of policies and measures aimed at reducing the environmental impacts generated by logistics activities. The traditional supply chain has a certain inability to adapt to the rules agreed in Coop 15. The Green Supply Chain deals with the distribution flows of goods with a view to generating low environmental impact. The Green Supply Chain (GSC) involves aspects of reducing negative impacts throughout the logistics chain, from raw material suppliers, production to the distribution of the product to the customer. In this way, this article seeks to identify the factors that generate negative impacts in the traditional Supply Chain, thus helping to decarbonize it, and create a path for the development of the GSC and thus avoid interruptions in the distribution flow due to not meeting environmental targets. The main problem in decarbonizing the Supply Chain is its difficulty in complying with the rules agreed by the nations in COOP 15. To this end, a systematic literature review was carried out based on the available literature. Based on various articles and books, the parameters that define a Green Supply Chain and the factors that generate environmental impacts in conventional chains were identified. As a result, it was possible to verify a positive relationship between the carbon emission reduction factors that are linked to the supply chain performance factors found in the literature. Of the factors relating to the decarbonization of supply chains, some were more clearly related, such as reducing carbon emissions, reducing environmental risks and the ability to operate using new technologies. Future research could build on the limitations of this study.