Leishmaniasis is a neglected tropical disease and affects more than 350 million people worldwide. However, there are no vaccines for humans, and current treatment is hampered due to its high cost, numerous side effects, and painful administration routes. Ending its epidemics by 2030 has become a United Nations goal, and the multitarget drug strategy emerges as a promising alternative. Flavonoids are an example of multitarget compounds and organic synthesis represents a tool to obtain high yields of these molecules. In our study, we synthesized 17 flavonoid analogs using a scalable, easy-to-reproduce, and inexpensive method. All compounds demonstrated an impressive inhibition capacity against rCPB2.8, rCPB3, and rH84Y, which are highly expressed in the amastigote stage, the target form of the parasite. Compounds 3c, f12a, and f12b stood out as effective against all isoforms and intermolecular interactions were investigated through a molecular modeling study. The compounds were highly potent against the parasite and demonstrated low cytotoxic action against mammalian cells. The results were pioneering, representing an advance in the investigation of the mechanisms behind the antileishmanial action of flavonoid derivatives. Furthermore, compounds have shown to be promising leads for the design of other cysteine protease inhibitors for the treatment of leishmaniasis diseases.

Despite polycarbonate (PC) being a widely used engineering plastic, its notch and crack sensitivity pose challenges in critical applications. To address this, PC was blended with elastomeric polymers to explore the improvement in toughness. This study systematically investigates the toughening mechanisms of PC blended with acrylonitrile-butadiene-styrene (ABS), copolyether ester elas-tomer (COPE), and ABS and styrene-ethylene-butylene-styrene (SEBS) copolymer grafted with maleic anhydride (MA). The morphology and mechanical behavior were evaluated under qua-si-static and high-speed tensile tests and Charpy impact tests using optical, electronic, and atomic force microscopy and Raman spectroscopy. The morphological analysis reveals cavitation and crazing phenomena for COPE and SEBS-g-MA systems, and mostly debonding for ABS, indicating an improvement in toughening. While the addition of ABS improves the PC plastic deformation, modifying ABS with maleic anhydride enhances the elastic modulus. Blending PC with SEBS-g-MA increases the strain at break, and the addition of COPE significantly improves the deformation behavior of PC (by around 115%). This comparative study provides valuable insights into the performance of different PC-elastomer blends under similar conditions, supporting the selection of appropriate materials for given applications.

In this study a material based on Polyethylene (PE) and Microcrystalline Cellulose (MC) was developed as a breathable packaging film. Surface functionalization of MC with 3 aminopropyltriethoxysilane (APTES) shows to be an efficient alternative to tailor their properties and increase opportunities for the application of MC on the reinforcement of polymers such polyethylene (PE). Functionalization of MC with mentioned silane derivative was achieved using a green method and later used on the development of composites with PE in three percentages (1, 3 and 5%). All the materials were prepared by melt blending and characterized, in terms of structural properties (ATR-FTIR and FTIR in transmittance, EDX, SEM), thermal properties (DSC and TGA), thermomechanical properties (DMA), contact angle measurements and permeability to oxygen and water vapor. The materials demonstrated to have potential to be used as breathable film packaging of fresh products.

Nowadays, the growing concern about improving thermal comfort in textiles, asphalt pavements and buildings has stimulated research into phase change materials (PCMs). However, the incorporation of PCMs directly causes mechanical impacts. Therefore, this study herein reported focuses on designing coaxial phase change fibres using commercial cellulose acetate (CA) or recycled CA obtained from cotton fabrics (CAt) as a coating and polyethylene glycol (PEG) 2000 as a core. The phase change fibres (PCF) were produced by wet spinning, varying the parameters: (i) CA concentration, molecular weight and source (virgin versus recycled); and (ii) PEG concentration and ejection. For phase change recycled fibres (PCFt), PEG concentration and ejection were varied. The fibres were assessed for their optical, chemical, thermal and mechanical properties. Bright-field microscopy images and Scanning Electron Microscopy (SEM) micrographs proved the coaxial structure. Fourier Transform Infrared spectroscopy (FTIR) confirmed the presence of PEG in the core. Thermogravimetric Analysis (TGA) proved the ability of PCFs to tolerate high temperatures. Differential Scanning Calorimetry (DSC) attested to the presence of PEG2000 peaks, since their melting points were close to those of virgin PEG2000, with a slight change in the PCFs and PCFts caused by the protective sheath of CA and CAt.

Effective waste elimination is critical for the success of construction projects. Although several studies have focused on various aspects of construction waste, limited efforts have investigated the dynamic effect of Making-Do (MD) practices on productivity, rework, defects, and materials wastage. From a lean construction perspective, this study aims to address MD waste using the Last Planner System (LPS) and BIM. First, the casual structure that can cause MD in construction projects was expressed in a casual loop diagram (CLD), and thematic analysis uncovered the strategies of LPS-BIM to eliminate MD identified by reviewing the literature. Secondly, twenty-five strategies from the LPS and BIM strategies to address MD using Structural Equation Modeling (SEM) were assessed. Subsequently, a system dynamics model (SDM) for investigating LPS-BIM strategies on MD decisions in a construction project was formulated based on the underlying causal loop diagrams and the mathematical relations among the variables. Finally, the model was applied to three projects, and simulations for four LPS-BIM scenarios were carried out. The findings show that dynamic interactions among diverse production planning and control factors are critical in evaluating MD impacts on a construction project. The results demonstrate that the LPS-BIM approach resulted in an average 43.8% reduction in the tasks performed with MD, 45.3% of constraints, 66.5% of construction waste, increasing 13.7% completion rate, and 29.3% cost reduction, demonstrating that LPS-BIM as a more efficient solution for MD mitigation and construction planning.

(1) Background: The severity of malaria is associated with low bioavailability of antioxidants and high concentration of free radicals that induce oxidative damage in cerebral and pulmonary microcirculation. This can be prevented by the action of consumable antioxidants present in foods. Therefore, we investigated the protective role of lycopene (LYC) on the oxidative changes induced by Plasmodium berghei (Pb); (2) Methods: Mice were infected by intraperitoneal injection of 106 parasitized red blood cells and treated via gavage with LYC (3.11 mg/kg bw/day) or NAC (62 mg/kg bw/day). They were then evaluated for 1, 4, 8 or 12 days after infection. Levels of thiobarbituric acid reactive substances (TBARS), antioxidant capacity by inhibition of ABTS radicals (AC-ABTS) and DPPH (AC-DPPH), uric acid (UA), and nitric oxide (NO) were measured in brain and lung tissues; (3) Results: The infection caused oxidative stress confirmed by increased levels of TBARS, AC-ABTS, AC-DPPH, UA, and NO in the tissues leading to the death of the animals. LYC prevented the increase in TBARS, AU, and NO levels compared to Pb (p< 0.0001) and NAC+Pb groups (p<0.0001), reaching values similar to those of Sham animals; (4) Conclusions: These results are striking evidence of the beneficial effect of lycopene supplementation on oxidative stress in experimental malaria in vivo and emphasize the importance of antioxidant supplementation in the treatment of the disease.

This study develops a structure for mapping native vegetation in a transition area between Brazilian Cerrado and Atlantic Forest from integrated spatial information from the Sentinel-1 and Sentinel-2 satellites. Most studies use this data separately, however, the integrated use of optical sensors with Synthetic Aperture Radar (SAR) sensors can improve the methodology for classifying land use and land cover (LULC). The fusion of Sentinel-1 and Sentinel-2, for example, can increase the accuracy of mapping algorithms, using complementary information, such as spectral, backscattering, polarimetry, and interferometry. The study area comprises the Lobo Reservoir Hydrographic Basin, which is part of an environmental conservation unit protected by Brazilian law and with significant human development. LULC were classified, using the random forest deep learning algorithm. The classifying attributes were backscatter coefficients, polarimetric decomposition, and interferometric coherence for radar data (Sentinel-1), and optical spectral data, comprising bands in the red edge, near infrared, and shortwave infrared (Sentinel-2). The attributes were evaluated in three settings in which the SAR and optical data were evaluated separately (C1 and C2, respectively) and in an integrated manner (C3). The study found greater accuracy for C3 (96.54%), an improvement of nearly 2% compared to C2 (94.78%) and more than 40% in relation to C1 (55.73%). The classification algorithm encountered significant challenges in identifying wetlandsin C1, but performance improved in C3, enhancing differentiation by stratifying a greater number of classes during training and facilitating visual interpretation during sampling. Accordingly, the use of SAR and optical data becomes an alternative to optimize LULC mapping in tropical regions, due to the limited influence of atmosphere on images in the microwave range.

Studies and opinion articles present unequal conclusions concerning empathy and morality, mainly because a somewhat heterogeneous and foggy conceptual approach prevails. This scoping review aims to analyse the relationship between empathy and morality and to present a novel conceptual model of empathy applied to moral decisions.A search in PsycINFO, Scopus and PubMed identified articles addressing the relationship between empathy and morality.Thirty-two articles were included. We find an absence of a consensual definition of empathy. It is commonly defined as a predominant emotional process and a factor of bias and prejudice in moral decisions.According to our conceptual model, empathy is a distinct, complex human neuropsychological capacity that mobilises and is dependent on the proper functioning of several brain areas and balances the scales on which are Emotion and Reason, enabling the most thoughtful moral decisions possible in diverse circumstances and contexts.

Recently, the Portuguese parliament approved the decriminalisation of euthanasia for incurable illnesses. As the experiences of other countries show us, it will be a matter of time before mental disorders are addressed. Studying the phenomenon, particularly in vulnerable groups, in advance is essential for proper law drafting. Therefore, instruments which allow an objective assessment and comparison between groups must be available. This study aims to explore the validation of Faria's Attitude about Euthanasia scale in Portuguese older adult patients with mixed anxiety-depressive disorder. A sample of 114 older adult patients with mixed anxiety-depressive disorder collected by convenience in the Psychiatry Department of Senhora da Oliveira Hospital in Portugal was included. The pre-final version of the scale was tested in a small group with good results. The validity of the internal structure was analysed using exploratory factorial analysis. The internal consistency study verified reliability. For construct validity, we assessed the correlation with other validated scales measuring attitudes toward euthanasia, cognitive performance, personality and empathy. Attitude about euthanasia scale showed good internal consistency. One factor was retained in the principal component analysis. Significant correlations verified construct validity. The results support the scale's usefulness and validity. This study makes available a unique instrument to assess the overall tendency of the attitudes towards euthanasia in European-Portuguese, which can be used, for example, to compare Portuguese with Brazilian older adult psychiatric patients suffering from the same disorder. Furthermore, the adapted scale paves the way for other cross-cultural translations, adaptations, validations, and comparative analyses.

The art work of this present paper is to show properly conditions and aspects to reach stability in the process control, as also to avoid instability, by using digital PID controllers, with the intention of help the industrial community. The discussed control strategy used to reach stability is to manipulate variables that are directly proportional to their controlled variables. To validate and to put the exposed principles into practice, it was done two simulations of a continuous fermentation tank process start-up with the yeast strain S. Cerevisiae NRRL-Y-132, in which the substrate feed stream contains different types of sugar derived from cane bagasse hydrolysate. These tests were carried out through the resolution of conservation laws, more specifically mass and energy balances, in which the fluid temperature and level inside the tank were the controlled variables. The results showed the facility in stabilize the system by following the exposed proceedings.

Many of engineering’s problems are about to optimise equations, functions and process models equations which appear on common or even complex science’s cases. Most applied optimisation methods nowadays can only be used on particular cases, so the main objective of this article is to define a computational method that can optimise or even find target values for specified objective functions and variables, by just using computer effort. Chemical plants involve many differential equations and they can be optimised with more facility now. On this paper, there are shown as example, an optimisation for a chemical reactor, which is found the optimal temperature and volumetric flow rate of feed, for the given objective function being the composition of the desired product. Named Domain’s Sweep, it is an algorithm that evaluate given(s) mathematical function(s) and/or equation(s) by varying your(s) independent variable(s) through loops with a given step size and solving it after closing the degrees of freedom, and finally, with some condition statements, store all the optimum values of given or created objective functions with its respective independent variables. In another words, the user create an objective function and this method find the function’s maximum, minimum or a certain chosen target value, even if it does not have an inflection point in the given search interval of the independent variables.

Este artigo apresenta o processo de implementação da Hiperautomação no setor público brasileiro, especialmente no âmbito da Procuradoria Geral do Estado de Pernambuco. Devido à atual economia competitiva, a demanda por soluções inteligentes e confiáveis está aumentando. Para atender a essa necessidade, tecnologias inovadoras que abordem a complexidade inerente à transformação digital são desejáveis. Assim, as organizações públicas têm buscado aplicar a automação de processos para atender às necessidades dos cidadãos por um serviço mais eficiente e eficaz. No entanto, podemos observar que a automação pura e direta é apenas parte do processo de transformação. Algumas das razões que explicam a necessidade de ir além da automação de processos e alcançar a hiperautomação é a abundância de dados de várias fontes e tipos. Tudo deve estar dentro dos padrões legais, ressaltando que toda tecnologia deve estar alinhada com transparência e auditabilidade para ser incorporada com segurança. Para a experimentação, foi utilizado o método de pesquisa-ação com a aplicação da Hiperautomação, visando aumentar a arrecadação e a economia do Estado na Procuradoria Geral do Estado de Pernambuco.

O26 enteropathogenic Escherichia coli (EPEC), possesses a unique pseudocapsule composed of polysaccharides identical to the O antigen in their lipopolysaccharide (LPS) membrane. Therefore, the impact of O26 polysaccharides on the immune evasion mechanisms of capsulated O26 EPEC was investigated. Our findings reveal that the concentration of GlcNAc, an immunodominant unit of O26 polysaccharides capable of activating the MBL (Mannose Biding Lecting) pathway of the complement system, was found to be lower in capsulated EPEC O26 compared to naked shiga toxin-producing E. coli (STEC) O26 strain. It was noted that, unlike the naked STEC strain, the capsulated EPEC O26 strain was protected against lysis by the alternative pathway of the com-plement system by inhibiting C3b adhesion to its bacterial surface. Capsulated EPEC O26 strains were also able to avoid phagocytosis by macrophages. However, the immune evasion provided by the capsule was overcome in the presence of anti-O26 polysaccharide antibodies. Additionally, these antibodies were able to recognize O26 EPEC in the presence of biofilm and inhibit their adhesion to human epithelial cells. Overall, the results indicate that the O26 polysaccharides can generate an effective humoral immune response, making them promising antigens for the de-velopment of a vaccine against capsulated O26 E. coli

Dye-containing effluent generated in textile industries is polluting and complex wastewater. It should be managed adequately before the final destination. The up-flow anaerobic blanket (UASB) reactor application is an eco-friendly and cost-competitive treatment. The present study briefly reviews the UASB application for dye wastewater valorization. Bioenergy and clean water production potential during dye-containing wastewater treatment are emphasized to promote resource recovery in textile industries. Efficiencies of color and chemical oxygen demand of 50–97% and 60–90% are reported in bench-scale UASB studies. A biogas yield of 0.36–36.04 L d-1 in UASB, which treats dye-containing effluents, is documented. Bioenergy production and water reuse allow environmental and economic benefits. However, data on full-scale UASB treating dye wastewater are missing. Besides, studies on combined systems integrating membrane processes, such as ultrafiltration and nanofiltration, and pretreatment of wastewater and sludge for improvements in biogas production might realize the complete potential for resource recovery of UASB technology.

Additive Manufacturing (AM) has been proving suitable to support or even replace traditional manufacturing in several industries, offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and greenhouse gas (GHG) emissions. This study aimed to carry out a comparative assessment of the life cycle, from gate to gate, in the production of a low alloy carbon steel flange part using ER-90 wire. The methods utilized were Wire and Arc Additive Manufacturing (WAAM) and conventional manufacturing (CM) by forging, and comparative factors were energy demands, GHG emissions and generated solid waste. The total energy consumption in WAAM was 10,239.40 MJ, total carbon footprint in CO2 equivalent (CO2e) was 714.1 kgCO2e kg-1, and generated solid waste was 68.6 kg, respectively, 90%, 95% and 76% lower than consumption calculated in conventional manufacturing.

Cement production contributes to about 7% of CO2 emissions into the atmosphere. Despite our best efforts, we cannot find a competitive substitute that is both reliable and environmentally friendly. The simplest way to solve the problem is to rationalize the resources and try to minimize its use by substitute them with other materials. A concrete that contains a substantial amount of fly ash is already available, but its use is limited by the current shortage in the market and reduced initial resistance. In this context, ternary mixtures have been used to conduct an experiment. A significant volume of cement has been replaced with fly ash and metakaolin, which serves as a correction factor for the performance. In this work the main advantages and disadvantages of the simultaneous use of these two additions, which may reveal to be very interesting with high volumes of substitution will be presented. The performance of this ternary mixture is very promising. Provide a wide range of possibilities for replacing cement, maintaining or even improving its mechanical and durability properties. A solution for an ecological concrete with enhanced performance for general use in construction as an alternative to conventional concrete.

In a 1.5°C warmer world, the Northeastern (NE) South America’s ecosystems will experience more severe droughts, associated with decreasing rainfall. The severity of flash drought events based on vegetation and surface soil moisture has not been identified over the Caatinga ecosys-tem. This study aimed to characterize the impact of flash drought events on vegetation response via soil moisture over NE South America during the first two decades of the 2000s. Three drought indices were used to characterize flash droughts: the Standardized Difference Vegetation Index (SDVI) derived from Meteosat Second Generation (MSG), the Standardized Precipitation Index (SPI) from ground-data, and the Surface Soil Moisture (SSM) product-based Soil Moisture and Ocean Salinity (SMOS). Results revealed dramatic impacts of flash drought events on vegetation dynamics that caused abrupt changes in the regional vegetation phenology. The regional patterns of flash drought events in 2012 over NE South America were identified and had a severe impact on its Caatinga-like vegetation-dependent moisture response. In 2012, anomalously long dry spells with negative rainfall anomalies in the non-rainy season and persistent on vege-tation greenness and rapidly decreased soil moisture were prominent, thus identifying NE South America to the impacts of flash drought events. Additionally, the results from the trends analysis of radiance fluxes estimated from the MSG satellites over 18 years revealed that an overall drying trend in the NE South America semiarid ecosystem during the last two decades. Here, flash drought events were identified as the conse-quent rainfall deficiency at SPI-3< −1 for a period of five consecutive weeks or more, which the soil moisture content dropping from the 40th percentile to below the 20th percentile, with the NDVI lower than 0.30 unit. These results could be useful to guide flash-droughts early warning systems in NE South America.

The use of Information Communication Technologies (ICT) in education brings up new possibilities of promoting the learning and health experiences. In this sense, education contexts of 21st century must consider these two areas of knowledge, especially their integration. This article presents learning practices developed with mobile devices and games, in order to improve learning and well-being in children and adolescents undergoing cancer treatment in non-formal educational setting. The methodology is based on qualitative case studies with content-based data analysis, involving informal interviews and observation methods. The study considers data from 5 patients who participated in the research between 2015 and 2019. The results demonstrate a positive influence of the practices with mobile technologies and games in terms of learning and in the well-being feeling of patients during the treatment.

Lower limb exoskeletons have the potential to reduce the prevalence of work-related musculoskeletal disorders; however, they often lack user-oriented control strategies. Human-in-the-loop (HITL) controls can adapt an exoskeleton’s assistance in real-time, to optimize the user-exoskeleton interaction. This study presents a HITL control for a knee exoskeleton to minimize the users’ physical effort, a parameter innovatively evaluated by their interaction torque with the exoskeleton (a muscular effort indicator) and metabolic cost. This work innovates by estimating the user’s metabolic cost within the HITL control through a machine-learning model. The regression model was able to estimate the metabolic cost, in real-time, with a root-mean-squared error of 0.66 W/kg and a mean absolute percentage error of 26%, making faster (10s) and less noisy estimations than a respirometer (K5, Cosmed) device. The HITL reduced the user’s metabolic cost and interaction torque by 7.3% and 32.3%, respectively, when compared to a zero-torque control. The developed HITL control surpassed both a non-exoskeleton and a zero-torque condition regarding the user’s physical effort, even for a simple task such as slow walking. Furthermore, the user-specific control enabled a lower metabolic cost than the non-user-specific assistance. This proof-of-concept demonstrated the potential for HITL controls in assisted working.

The second external cause of death from unintentional injuries is falls in people over 60, a worldwide public health problem. Associated factors are identified early in Primary Health Care. Thus, we analyze professional narratives about older adults/old age and the organization of services in the presence of fall-inducing frailty. A structured narrative was applied under the following stages: understanding the context; setting/plot/character analysis; and interpretive synthesis. Data were collected from August to November 2022, distributing 21 health professionals in three Narrative Focus Groups. In the analyses, the collective conceptions dialogued with Bourdieu’s Epistemology of field, habitus, and capital. Among the results, technical and common sense representations of older adults were simultaneously observed, along with the belief of old age as a problematic life stage. Care is centered on the installed disease/ailment. Encouraging autonomy and self-care emerges in integrative health practices, which older adults underestimate. Professionals access the lives of older adults according to their habitus, which, in turn, is structured (structuring) in the disputes for installed capital. Thus, the care provided disregards subjectivities and symbolic systems associated with falls.

Despite the advancements in evidence-based medicine, many hospitals still maintain high rates of patients undergoing prolonged preoperative fasting. The goal of this study is to determine the prevalence of prolonged fasting time among patients undergoing elective surgeries at a Brazilian university hospital and its associations with clinical and sociodemographic variables. This cross-sectional study was conducted between May and November 2019 and included patients of all ages undergoing elective surgeries. Out of the 293 patients analyzed, 64.2% were male, with ages ranging from 1 to 85 years, and 93.9% were classified as ASA I or II. The prevalence of preoperative fasting exceeding 8 hours was 89.4%. An average fasting time exceeding 11 hours was observed across all age groups. Patients who underwent procedures in the afternoon had an average fasting time that was 16% longer than those in the morning period (13.84 vs. 11.92, p<0.001). Surgery time (r=0.134, p<0.03) and anesthesia times (r=0.121, p<0.04) demonstrated a weak correlation with fasting time. Despite the international consensus on preoperative fasting time, our study demonstrated low adherence to current recommendations. Therefore, healthcare professionals should ensure the comprehension of fasting guidelines, and further studies should aim to identify effective solutions to mitigate prolonged fasting.

Life Cycle Assessment (LCA) is a technique developed to measure possible environmental impacts during the manufacture and use of a given product or service. Additive Manufacturing (AM) has proven to be suitable in several industries, especially wire and arc additive manufacturing (WAAM), offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and equivalent CO₂ emissions (CO₂e). This study aimed to develop a methodology to evaluate environmental indicators during the life cycle assessment, from gate-to-gate, in the production of two low-alloy carbon steel metal parts (flanges) using ER-90 wire and allowed identifying the main stages that most influence environmental indicators. The total energy consumption in the production of flanges 1 and 2 were, respectively, 10,239.0 MJ, 12,754.0 MJ and the total carbon footprint, respectively, 714.1 kgCO₂e kg^-1 and 749.3 kgCO₂e kg^-1.

Exercises for lower trapezius (LT) often use overhead positions, causing compressive forces to the subacromial space. Scapular retraction would be an alternative to activate LT muscle. Electromyography of infraspinatus (IS), upper (UT) and LT was recorded during scapular retraction under progressive adduction loads of 42 participants, divided in 2 groups: with (SP, n=26) and without shoulder pain (nSP, n=16). The adduction loads of 20, 30, 40 and 50% of the maximal voluntary contraction were applied using a load cell. Normalized electromyography and the ratio between UT and LT (UT:LT) were used for statistical analysis. No differences were observed between groups, but a condition effect occurred for all muscles: UT showed higher values at 50% vs. 20% (p=0.004); LT showed higher values on 40% and 50% (p=0.001; 0.006). Higher values for IS were noted at 40% (vs 20%; p=0.04), and at 50% (vs. 20%; p=0.001, vs. 30%, p=0.001; vs. 40%; p=0.001). UT:LT showed lower values at 50% (vs. 20%; p=0.001, and vs. 30%; p=0.016). Scapular retraction with adduction loads at 40-50% is an alternative to overhead exercises aiming to activate the LT and the IS muscles. The exercise ensures higher levels of LT and IS excitation, without increasing UT excitation.

Contrary to previous belief, mutation frequency also depends on how essential a gene is. Mutation frequency is substantially lower in the coding regions of essential genes and higher in less essential genes. Even though the mutation bias based on gene essentiality is incapable of invalidating Darwinism, this bias certainly added a rather unsubtle obstacle to it by contradicting a paradigm that was widely held: that mutations are random in the sense of being independent of their function for the organism. The reason this bias occurs is currently unknown. Here, I present the theoretical solution of why genetic mutations also depend on whether the gene is more or less essential. My theory is that each gene or epigene has its own level of resistance to entropic elevation, something directly proportional to the frequency of its expression. The more a gene is expressed, the higher is its resistance to entropic elevation and vice versa. For genetic information to be conserved instead of suffering mutation, a relevant factor is also the frequency of its expression. The energy expenditure directed to a gene of current utility engenders resistance to entropic elevation of the information encoded in that gene, as energy enables not only the existence of information but also its conservation. My theory—which is based on fundamental physics and contains predictions that can be empirically tested—solves a crucial problem in evolutionary biology and genetics; if I am right, I will have established a biological law. Finally, my aim here is also to provide a substantial advance in knowledge about the relationship between information, genetics, and thermodynamics.

Studies show that executive functions and motor development are associated among each other and with learning ability. A more technological lifestyle, related with digital culture, should be considered an important component to stimulate children. In addition, digital games constitute an element of the digital culture in which children are inserted. The aim of this study is to present a systematic mapping of the literature involving executive functions, motor development and the use of digital games in intervention programs for elementary school children, from 6 to 11 years old. Four databases were searched: PubMed, Scielo, Science Direct and SCOPUS, including publications between 2012 and March 2021. The initial results indicated 4881 works. After the selection process, 15 investigations that presented the central theme of the study were selected. The main results indicate that intervention strategies are quite heterogeneous. Most of the studies demonstrated significant positive effects after intervention protocols and were conducted in Europe and 46% of the studies were conducted in a school environment. No researches were identified that involved technological solutions involving executive functions, motor development and digital games in an integrated manner, constituting a field of future scientific research.

This study aimed to characterize the risk of falling in low, moderate and high risk participants from two different geographical locations using a portable force-plate. A sample of 390 older adults from South and North America were matched for age, sex, height and weight. All participants performed a standardized balance assessment using a force plate. Participants were classified in low, moderate and high risk of falling. No differences were observed between South and North American men, nor comparing North American men and women. South American women showed the significantly shorter center of pressure path length compared to other groups. The majority of the sample was categorized as having low risk of falling (male: 65.69 % and female: 61.87 %), with no differences between men and women. Also, no differences were found between North vs. South Americans, nor for falls risk levels when male and female groups were compared separately. In conclusion, South American women had better balance compatible with the status of the 50-59 years’ normative age-range. The prevalence of low falls risk was ~ 61-65 % and the prevalence of moderate to high risk was ~ 16-19 %. The frequency of fall risk did not differ significantly between North and South Americans, nor between males and females.

This manuscript presents the result of utilizing cellulose as a template to prepare na-nosized WO3-NiWO4 and its application as co-catalysts in Pt/WO3-C and Pt/WO3-NiWO4-C for ethanol and glycerol electro-oxidation. Microcrystalline cellulose was hydrolyzed with phosphotungstic acid (H3PW12O40) to prepare the nanosized template of crystalline cellulose. Next, the template was impregnated with Ni(NO3)2, rendering a precursor mate-rial that is subsequently air-calcinated, removing the carbon-template material to obtain the nanometric WO3 and NiWO4. Elemental analysis confirmed the coexistence of nickel and tungsten, whereas the thermal analysis evidenced the high thermal stability of these materials. The X-ray diffractograms displayed crystal facets of WO3 and, when added Ni, of NiWO4. The transmission electron micrographs corroborated the formation of na-nosized particles with average particle sizes close to 50 nm. Finally, to apply this material, Pt/WO3-C and Pt/WO3-NiWO4-C were prepared and used in ethanol and glycerol electro-oxidation in alkaline medium, observing a promotional effect of the oxide and tungstate by reducing the onset potential and increasing the current density. These materials show great potential to produce clean electricity or green hydrogen contributing to energetic transition.

In Brazil, the production of corn and soybeans has been growing significantly in recent years. Considering that the strategies for investing in the production of these crops are conditioned by production costs and risk, the objective of this article is to propose a simulation model that indicates the trend of production costs for these commodities, considering the dispersion and correlation of selected key variable prices and corn and soybean production costs practiced between the years of 2018 and 2022. Fifty specialized companies in the state of Sao Paulo, Brazil, provided data for this study, and Monte Carlo simulations showed that the total cost of corn production/ha is between USD 600.00 and USD 1150.00, with a level of certainty of 84.7%, and soybeans are in the range of USD 260.00 to USD 420.00, with a level of certainty of 86.4%. The model evidenced a trend of decreasing production costs for the crops for the 2023/24 and 2024/25 harvests, as the input with the greatest impact (fertilizer) is showing a downward trend. On the other hand, costs related to labor, soybean seed, and fungicides are showing an upward trend, while dolomitic limestone corrective remains stable.

The production of fuels and other industrial products from renewable sources has intensified the search for new substrates or for the expansion of the use of substrates already in use, as well as the search for microorganisms with different metabolic capacities. In the present work, we isolated and tested a yeast from the soil of sugarcane irrigated with vinasse, that is, with high mineral content and acidic pH. The strain of Meyerozyma caribbica URM 8365 was able to ferment glucose, but the use of xylose occurred when some oxygenation was provided. However, some fermentation of xylose to ethanol in oxygen limitation also occurs if glucose is present. This strain was able to produce ethanol from molasses substrate with 76% efficiency, showing its tolerance to possible inhibitors. High ethanol production efficiencies were also observed in acidic hydrolysates of each bagasse, sorghum, and cactus pear biomass. Mixtures of these substrates were tested and the best composition was found for the use of excess plant biomass in supplementation of primary substrates. It was also possible to verify the production of xylitol from xylose when the acetic acid concentration is reduced. Finally, the proposed metabolic model allowed calculating how much of the xylose carbon can be directed to the production of ethanol and/or xylitol in the presence of glucose. With this, it is possible to design an industrial plant that combines the production of ethanol and/or xylitol using combinations of primary substrates with hydrolysates of their biomass.

The use of several light-related variables, such as the Secchi disc depth, the euphotic depth, and in particular, the diffuse attenuation coefficient (Kd), is deeply rooted in phytoplankton research, but these are not the most appropriate indicators of the amount of light available for photosynthesis. We argue that the variable of interest for phytoplankton is the mean light intensity in the mixed layer (Im), which represents the mean light to which phytoplankton cells are exposed throughout their life cycle, while being continuously mixed in the mixed layer. We use empirical data collected in different coastal ecosystems in southern Portugal to demonstrate why Im should be the preferred metric instead of the deeply rooted Kd. We show that, although the relationship between Im and Kd is inversely proportional, it is not always strong or even significant. Different Im values can be associated to the same Kd, but distinct Im have different physiological effects of phytoplankton. Therefore, Kd does not capture the amount of light available for photosynthesis, given that, unlike Im, Kd calculation does not consider the depth of the mixed layer. Therefore, we urge phytoplankton researchers to consider the measurement and calculation of Im when evaluating light-related processes in phytoplankton ecology.

Cross-cultural mobility is a phenomenon that is increasingly growing, and the resulting stress has become a severe health issue. Thus, we conducted a systematic review of articles reporting research on stress measures of cross-cultural mobility or acculturative stress, emphasizing its internal structure. We adopted the PRISMA procedures for scoping reviews (e.g., searching articles in databases), resulting in the inclusion 20 articles in the final analysis that present evidence of validity based on the internal structure of 16 measures. The most common factors identified were related to cultural stressors, language stressors, and discrimination stressors. After analyzing a cross-cultural mobility stress concept implicit in the definitions used in the articles, we found that most measures of acculturative stress did not evaluate it according to the Stress and Coping Model of Lazarus and Folkman. Most measures only focused on part of the phenomena (some estimated the stressors, others the coping strategies). Few took into account the physiological and psychological responses to internal or external stressors, and even fewer considered its positive aspects (eustress). Consequently, it is pivotal to develop measures that take into account the multiple dimensions of the cross-cultural mobility stress. Other results (e.g., validity evidence of the measures) and limitations of this systematic scoping review are presented and discussed.

Corneal ulcer (CU) is an ophthalmopathy characterized by depression of the corneal surface with at least one stromal loss. CU is common in canine and feline species and is usually caused, among others, by trauma, infections, toxic contamination and endocrine disorders. They usually result from an increased inflammatory response and are associated with some clinical signs such as blepharospasm, photophobia, epiphora, pain and loss of corneal transparency. Despite advances in conventional and pharmacological therapy, in many cases indolent and recurrent ulcer treatments still lead to loss of visual acuity of the animal. This paper aims to report the effect of topical application of canine adipose tissue-derived mesenchymal stem cell (cATMSCs) as treatment of recurrent CU in a Poodle dog breed that showed clear difficulty in the healing process associated with diabetes. The animal was submitted to two applications of cATMSCs and showed improvement in the blepharospasm, conjunctival hyperemia, mucopurulent ocular secretion, photophobia, corneal opacity, chemosis, pigmentation, neovascularization, and pain parameters. Besides, Fluorescein test, Schirmer test and ocular fundus exam also showed improvement in their values concomitantly with lesion resolution. Due this, we showed that cATMSC therapy contribute to the regeneration of corneal tissue in CU and may contribute to the treatment to others ophthalmopathies.

The efficient and sustainable management of hospitals is an increasingly relevant challenge in the healthcare sector. With limited financial resources, regulatory pressures and increasing demands for quality services, hospitals are faced with the want to approve sound policies to certify financial and operational sustainability. Management accounting is critical in this instance. In Portugal the DL nº 284, of July 26, 1999, allow us to confirm the need to reinforcement of profitability and efficiency in the provision of healthcare. Management accounting is an essential tool for monitoring and controlling costs, making strategic decisions, efficiently allocating resources and evaluating performance in the hospital environment. It allows a comprehensive view of financial and operational aspects, providing valuable information for management and strategic planning. However, the sustainability of hospital management accounting is a critical and complex topic that deserves special attention. Hospitals face several challenges, such as the complexity of hospital costs, the integration of information systems and the measurement of healthcare value. These challenges can compromise the effectiveness of management accounting and its ability to provide relevant and reliable information for decision making. As a result, it is required to address the sustainability of hospital management accounting by identifying the specific challenges faced in this area and exploring opportunities to overcome them. By addressing these challenges and seizing opportunities, hospitals can strengthen their position in the healthcare sector, improve their operational efficiency, optimize resource allocation and ensure the provision of quality services to patients. In this article, the challenges faced by hospital management accounting will be analysed, such as the complexity of costs, the integration of information systems and the measurement of value in healthcare. Additionally, opportunities to improve financial and operational management will be highlighted through the adoption of advanced technologies, an emphasis on value-based management and collaborative partnerships. By exploring these themes, this essay aims to make a contribution. to the advancement of hospital management accounting and the sustainability of hospitals in the current healthcare scenario.

The objective was to assess the instrumental validity and the test-retest reliability of a low-cost hand-held push dynamometer adapted from a load-cell based hanging scale (tHHD) to collect compressive forces in different ranges of compressive forces. Three independent raters applied 50 pre-established compressions each on the tHHD centered on a force platform in 3 distinct ranges: ~70 N, ~160 N, ~250 N. Knee isometric strength was also assessed on 19 subjects in two sessions (48h apart) using the tHHD anchored by an inelastic adjustable strap. Knee extension and flexion were assessed with the participant seated on a chair with the feet resting on the floor, knees, and hips flexed at 90°. The isometric force peaks were recorded and compared. The ICC and the Cronbach’s α showed excellent consistency and agreement for both instrumental validity and test-retest reliability, as the correlation and determination coefficients. The SEM and the MDC analysis returned adequate low values with a coefficient of variation less than 5%. The Bland-Altman results showed consistency and high levels of agreement. The tHHD is a valid method to assess the knee isometric strength, showing portability, cost-effectiveness, and user-friendly interface to provide an effective form to assess the knee isometric strength.

This paper proposes an upper bound for mine productivity and also a simple truck dispatch rule that demonstrates how tight the upper bound can be using simulation. It also proposes a greedy search to approximate the productivity upper bound, which is faster and often exact. Uncertainty is added to the simulation in order to verify how the productivity responds to it. Typically, the productivity upper bound is less tight close to its saturation point as a function of the number of trucks, where adding more trucks only increases queues. Furthermore, more uncertainty in the model typically leads to a less tight upper bound. The results are conducted using real data from an open pit mine in Brazil.

The escalating environmental challenges that stem from urban residential waste in densely populated areas have become increasingly prominent in recent times. As a result, the waste management sector has experienced significant growth nationwide. However, due to the predominantly manual nature of these processes, their effectiveness falls short of meeting the current demand. Addressing these issues requires process enhancement. In this context, Industry 4.0, particularly the concept of Digital Twins, emerges as a potential avenue for refining processes. To tackle both current and future industry challenges, it is imperative to create a comprehensive methodology capable of generating effective solutions within the waste management sector. This paper provides an explanation of digital twins, outlines the methodological framework comprising an architectural structure and layered model, and details a series of sequential methodical stages for implementing digital twins based on the specific scope determined by the end-user. A noteworthy aspect is the transformative potential of digital twins in enhancing efficiency and precision within waste management practices. By providing a virtual real-time representation of the waste management system, digital twins empower simulations and experimentation to fine-tune processes. Furthermore, they facilitate informed decision-making by offering a detailed visualization of the complete system, simplifying the identification of challenges and opportunities for improvement. that this article derives from the presentation titled "Digital Twin application methodology for the improvement of production and service systems. Application to waste management processes" at the "Sustainable Smart Cities and Territories International Conference" held in the city of Manizales, Colombia, from 21st to 23rd June 2023.

Mining is an important industry, accounting for 6.9% of global GDP. However, global development promotes accelerated demand, resulting in the accumulation of hazardous waste in land, sea, and air environments. It reached 7 billion tonnes of mine tailings generated yearly worldwide, and 19 billion solid tailings will be accumulated by 2025. Adding to this, the legacy of environmental damage from abandoned mines is worrying; in Canada there are around 10,000 abandoned mines, 50,000 in Australia, 6,000 in South Africa, and 9,500 coal mines in China, reaching 15,000 by 2050. In this scenario, restoration techniques from mining tailing have become increasingly discussed among scholars due to their potential to offer benefits towards reducing tailings levels, thereby reducing environmental pressure for the correct management and adding value to previously discarded waste. This review paper explores available literature on the main techniques of mining tailing recycling and reuse and discusses leading technologies, including the benefits and limitations, as well as emerging prospects. The findings of this review serve as a supporting reference for decision-makers concerning the related sustainability issues associated with mining, mineral processing, and solid waste management.

A Robust Optimization framework with original concepts and fundamentals also admitting a fusion of ideals from relative regret models and static robust optimization, containing conservatism concepts is disclosed. The algorithm uses a fine-tune strategy to tune the model so the robustness and a target ideality can be mutually achieved with a specified risk. The framework comprises original concepts, a mathematical approach and an algorithm. The statistical treatment of the data with the original concepts from the framework make it able to make short, middle or long-term decision-making setting. The framework has high tractability since the algorithm forces the creation of a setting that makes a robust optimization with the specified risk. The framework can be applied in linear and nonlinear mathematical models since that the objective function is monotonic in the domain of the active convex region. Several examples are solved to best understand the framework and all results demonstrated high tractability and performance. There is a wide range of applications. Along all the text, there is a profound discussion about its philosophy, objective, original concepts, fields of application, statistical and probabilistic fundamentals.

Synthesis of nickel oxide nanoparticles (NiO NPs) is a low cost and ecofriendly route that brings great benefits over chemical and physical methods of synthesis. Our approach consisted of using aqueous extracts from treated waste of Manihot Esculenta (Cassava) as reducing, stabilizing and capping agents for the synthesis of NiO NPs. The results proved this approach might be a viable alternative. Extracts were mixed during 30 minutes with Ni(NO3)2.6H2O leading to NPs formation. NiO NPs were characterized through FTIR, XRD, TEM and Raman spectroscopy. NiO NPs showed different shapes and sizes around 5-10 nm in agreement with the particle size calculated by XRD Scherrer equation.

Despite the recommendation to treat depression using the transcranial direct current stimulation (tDCS), novel findings raised doubts over the tDCS efficacy in managing depressive episodes. Neurophysiologic approaches to understand the specificities of brain responses to tDCS in de-pressed patients remains a feature. Objective: to compare the immediate hemodynamic responses to tDCS on left dorsolateral pre-frontal cortex (DLPFC; F3-Fp2 montage) in patients with depres-sive disorder and healthy controls (no additional stimuli). Methods: Sixteen participants were al-located in depression group and 16 in the control group. Both groups received 2mA tDCS for 20 minutes, using the F3-Fp2 montage. The hemodynamic effect over the DLPFC was assessed using near-infrared intracranial spectroscopy (NIRS) positioned on the left supraorbital region (Fp1). Mean, minimal and maximal values of baseline and post-stimulation rates of oxygen saturation (SatO2) were recorded. The oxygenated hemoglobin rates (HbO) were extracted. Results: Be-tween-group differences were detected for mean and minimal baseline rates of SatO2 and HbO levels. The depression group showed lower results compared to the control group. After the pro-tocol, only the depression group showed increased mean and minimal rates of SatO2 and HbO. The post-tDCS rates were equal for both groups. Conclusion: The findings showed immediate anodal tDCS effects over DLPFC hemodynamics. The effects were exclusive for the lowest base-line rates group, not affecting the normal oxygen rates group. The minimal increase of SatO2 and HbO rates after the protocol in the depression group suggests that those with reduced cerebral perfusion may be more affected by tDCS.

The present study aimed to evaluate the technical feasibility of using a calcined aggregate with mining residue in different pavement layers, including base, sub-base, and wearing course. For this purpose, the physical characterization of the residue and clay was performed, as well as the production of calcined aggregates at temperatures ranging from 800ºC to 1100ºC. Additionally, the suitability of these aggregates in pavement layers was assessed, considering the current standards. The physical results characterization indicated that the studied clay is suitable for manufacturing calcined clay aggregates since the particle size distribution showed ceramic potential - according to the Winkler diagram - and presented a plasticity index (PI) higher than 15%. In the tests of boiling-induced mass loss and unit mass, the values obtained were within the limits established by the standards, being lower than 10% and 0.88 g/cm3, respectively. Regarding the abrasion loss test, the M1100 aggregate showed "Los Angeles" abrasion values lower than the limit established by the standard, demonstrating its potential as an artificial aggregate in pavement applications.

Cannabidiol (CBD) is a non-intoxicating compound extracted from Cannabis sativa, showing antidepressant-like effects in different rodent models. However, inconsistent results have been described depending on the species and the strain used to assess depressive-like behaviour. Moreover, only a few studies have investigated the effect of CBD in female rodents. Therefore, we aimed to i) investigate the effects of CBD in two different strains of mice (Swiss and C57BL/6) and in a rat model of depression based on selective breeding (Flinders Sensitive and Resistant Lines, FSL and FRL) subjected to tests predictive of antidepressant-like effects; and ii) investigate the influence of sex in the effects of CBD in both mice and rats. CBD induced an antidepressant-like effect in male Swiss but not in female Swiss or C57BL/6 mice in the tail suspension test (TST). In male FSL rats, CBD produced an antidepressant-like effect one-hour post-injection. However, in female FSL, CBD induced a bimodal effect, increasing the immobility time at one hour and decreasing it at two hours. Ketamine produced an antidepressant-like effect in male and female FSL rats at different doses. In conclusion, strain, sex, and administration time affect CBD's behavioural response to rodents exposed to tests predictive of antidepressant effects.

Recently, a breakdown of paracellular and vascular pathways and activated neuroimmune and oxidative pathways were established in (deficit) schizophrenia. The aim of the current study was to delineate a) the differences in these pathways between stable phase, first (FES) and multiple (MES) episode schizophrenia, and b) the pathways that determine the behavioral-cognitive-physical-psychosocial (BCPS)-worsening in FES/MES. This study included 21 FES and 58 FES patients and 40 healthy controls and measured indicants of serum IgA to C1q, and leaky gut, immune activation, and oxidative stress toxicity (OSTOX) biomarkers. We constructed a BCPS-worsening index by extracting a latent vector from symptomatic, neurocognitive, and quality of life data. FES patients showed significantly higher IgA to C1q, cadherin, catenin, plasmalemma vesicle-associated protein, and IgA/IgM to Gram-negative bacteria than FES patients and controls. In FES patients, the BCPS-worsening score was predicted (48.7%) by IgA to Klebsiella pneumoniae and lowered paraoxonase 1 activity. In MES patients, the BCPS-worsening score was explained (42.7%) by increased tumor necrosis factor-α, OSTOX, and number of episodes. In schizophrenia, 34.0% of the variance in the BCPS-worsening score was explained by IgA to K. pneumoniae, OSTOX, and number of episodes. Increased IgA to K. pneumoniae was the single best predictor of residual psychotic symptoms in FES and MES. This study delineated different mechanistic processes in FES, including breakdown of adherens junctions, bacterial translocation, and C1q circulating immune complexes; and FES, including immune and oxidative stress neurotoxic pathways. FES and MES comprise different staging subtypes, i.e., FES and MES with and without worsening.

Objectives: The impact of COVID-19 in metropolitan areas has been extensively studied. The geographic spread to smaller cities is of great concern and may follow hierarchical influence of urban centers. With that in mind, we investigated factors that affect vulnerability of inner municipalities in São Paulo State, Brazil, an area with 24 million inhabitants. Methods: Surveillance data for confirmed COVID-19 cases and admissions for severe acute respiratory disease (SARD) up to April 18^th were recorded for each of 604 municipalities that lay outside São Paulo metropolitan area. Vulnerability was assessed in Multivariable models, including sociodemographic indexes, road distance to the State Capital and the municipalities classification proposed by the Brazilian Institute of Geography and Statistics. Municipalities of great regional relevance were used as reference category for that classification. The outcome of interest for Cox regression was having COVID-cases, with time counting from the first report in São Paulo State. For binomial negative regression models, the outcomes of interest were rates of confirmed COVID-19 cases and admissions for SARD.Results: A total of 198 (32.8%) municipalities had autochthonous COVID-19 cases. In Cox models, affected municipalities were likely to have greater population density (Hazard Ratio[HR] for each 100 inhabitants per square kilometer, 1.07; 95% Confidence Interval [CI], (1.05-1.10)), proportion of inhabitants in urban area (HR, 1.02; 95%CI, 1.00-1.04), higher human development index (HDI, HR for 1%, 1.06; 95%CI, 1.00-1.13) and Gini Index for Inequality of income (HR for 1%, 1.04, 95% CI, 1.00-1.07). On the other hand, distance from the Capital was protective (HR for each 100Km, 0.82; 95%CI, 0.74-0.90). The HR95%[95%CI] also varied negatively according to the categories of influence of major centers (0.41 [0.22-0.77], 0.16 [0.09-0.32], 0.07 [0.03-0.15]). The binomial negative regression models for COVID-19 incidence also detected positive association with population density (Incidence Rate Ratio[IRR], 1.13; 95%CI, 1.07-1.18) and proportion of urban population (IRR, 1.04; 95%CI, 1.01-1.05), protection for cities distant to the Capital (IRR=0.73; 95%CI, 0.68-0.81) and increasing negative association for categories of influence (0.19 [0.09-0.42], 0.07 [0.03-0.15] and 0.03 [0.02-0.08]). Similar findings were detected when we used SARD incidence as outcome.Conclusion: Municipalities with greater population, density and regional influence were more likely to be affected earlier and more intensely by COVID-19. Non-pharmacological measures should be strengthened in those areas of greater risk.

Dengue is the most prevalent arthropod-borne disease globally and affects approximately 2.5 billion people living in over 100 countries. The increasing geographic expansion of Aedes aegypti mosquitoes which transmit the virus has made dengue fever a global health concern. There are currently no approved antivirals available to treat dengue, and the only approved vaccine used in some countries is limited to seropositive patients. Treatment of dengue therefore remains largely supportive to date; hence research efforts are being intensified for the development of antivirals against dengue. The NS3 and NS5 nonstructural proteins have been the major targets for dengue antiviral development due to their indispensable enzymatic and biological functions in the viral replication process. NS5 is the largest and most conserved nonstructural protein encoded by flaviviruses including dengue. Its multifunctionality makes it an attractive target for antiviral development against dengue, but research efforts are hindered due to its limited structural characterization compared to the NS5 of other flaviviruses like the Zika virus. Increase in structural insights into the dengue NS5 protein will accelerate drug discovery efforts focused on NS5 as an antiviral target. In this review, we will give an overview of the current state of therapeutic development against dengue.

Species belonging to the Bauhinia genus, usually known as "pata-de-vaca", are popularly used to treat diabetes. Among them is Bauhinia ungulata var. obtusifolia (Ducke) Vaz, whose leaves are used, as a tea, for medicinal purposes in the Amazon region. The microencapsulation of the aqueous extract of its leaves, containing phenolic compounds, using five different wall materials (maltodextrin: DE11-14, and DE4-7; β-cyclodextrin; pectin, and sodium carboxymethylcellulose) is described in this paper. The microstructure, particle size, thermal behavior, yield, and encapsulation efficiency were investigated and compared using different techniques. Using high-performance liquid chromatography, phenolics, and flavonoids were detected and quantified in the microparticles. Microparticles, obtained with yield and phenolics encapsulation efficiency ranging between 60-83 % and 35-57 %, respectively, showed a particle size distribution between 1.15 and 5.54 µm, spherical morphology, and wrinkled surface. Among them, those prepared with sodium carboxymethylcellulose and pectin proved to be thermally the most stable. They had the highest flavonoid content (23.07 and 21.73 mgRUTE/g Extract) and total antioxidant activity by both the DPPH· (376.55 and 367.86 µmolTrolox/g Extract) and ABTS·+ (1085.72 and 1062.32 µmolTrolox/ g Extract) assays. The chromatographic analyses allowed for quantification, in the microparticles, chlorogenic acid (1.67-1.98 mg/g Extract), p-coumaric acid (0.06-0.08 mg/g Extract), rutin (11.1-12.9 mg/g Extract) and isoquercitrin (0.47-0.53 mg/g Extract), compounds considered responsible for the antidiabetic property attributed to the species.

The separator membrane is an essential component of lithium-ion batteries, separating the anode and cathode and controlling the number and mobility of the lithium ions. Among the polymer matrices most investigated for battery separators are poly(vinylidene fluoride) (PVDF) and its copolymers poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE), poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), and poly(vinylidene fluoride-cochlorotrifluoroethylene) (PVDF-CTFE), due to their excellent properties such as high polarity and the possibility of controlling the porosity of the materials through binary and ternary polymer/solvent systems, among others. This review presents the recent advances on battery separators based on poly(vinylidene fluoride) (PVDF) and its copolymers for lithium-ion batteries. It is divided in the following sections: single polymer and co-polymers, surface modification, composites and polymer blends. Further, a critical comparison between those membranes and other separator membranes is presented, as well as the future trends on this area.

Angiotensin-converting enzyme 2 (ACE2) is an important player of the renin-angiotensin-aldosterone system (RAAS) in regulating the conversion of angiotensin II into angiotensin (1-7). While expressed on the surface of human cells, such as lung, heart, kidney, neurons, and endothelial cells (EC), ACE2 is the entry receptor for SARS-CoV-2. Here, we would like to highlight that ACE2 is predominant on the EC membrane. Many of coronavirus disease 2019 (COVID-19) symptoms have been associated with the large recruitment of immune cells, directly affecting EC. Additionally, cytokines, hypoxia, and complement activation can trigger the activation of EC leading to the coagulation cascade. The EC dysfunction plus the inflammation due to SARS-CoV-2 infection may lead to abnormal coagulation, actively participating in thrombo-inflammatory processes resulting in vasculopathy and indicating poor prognosis in patients with COVID-19. Considering the intrinsic relationship between EC and the pathophysiology of SARS-CoV-2, EC-associated therapies such as anticoagulants, fibrinolytic drugs, immunomodulators, and molecular therapies have been proposed. In this review, we will discuss the role of EC in the lung inflammation and edema, in the disseminate coagulation process, ACE2 positive cancer patients, and current and future EC-associated therapies to treat COVID-19.

Background: The 6-minute walk test (6MWT) is a simple and low-cost method that allows assessment of functional capacity in patients with heart failure (HF). However, the prognostic role of 6MWT in HF remains uncertain. Objectives: We aimed to evaluate the 6MWT as a predictor of mid-term adverse outcomes in patients with HF with mid-range and reduced ejection fraction. Methods: Prospective single-center cohort study that included patients with HF with an ejection fraction under 50% at a specialized outpatient HF service. Patients underwent the 6MWT on admission and were compared according to the distance walked: Group I walked ≥350 meters and group II <350 meters. The primary outcome was a composite of death from any cause or hospitalization for HF decompensation in one-year follow-up. Secondary outcomes were the components of the primary outcome in an isolated analysis. Results: Sixty patients were included, 43.3% male, with a mean age of 61.1 ± 12.9 years and ejection fraction 34.3 ± 10.1%. 52 patients (86.7%) were on guideline-directed triple therapy for HF. The average distance walked in the 6MWT was 395.1 ± 98.8 meters, with 40 patients (66.7%) in group I and 20 (33.3%) in group II. The primary outcome in groups I and II were, respectively, 15,0% and 35,0% (p=0.05). One-year mortality was 5.0% vs 15.0% (p=0.18) and the hospitalization rate was 10.0% vs 20.0% (p=0.28). Conclusions: There was no association of distance <350 meters in the 6MWT with the primary outcome in patients with HF. Despite the higher occurrence of outcomes in group II, the difference was not statistically significant in this analysis. On a selective basis, the 6MWT may be a useful tool for prognostic stratification in HF, if combined with other methods.

The use of optical fibers is increasing in modern aircraft because it helps solve challenges of size, weight, communication, and reliability in new aircraft generation. This work describes a video and power transmission system using optical fibers (PoF) for in-flight entertainment (IFE) system application. We present the benefits and the limitations of this application, and we perform two practical experiments to demonstrate their performance. It used off-the-shelf devices in the experiments, such as one 15-W semiconductor laser operating at 808 nm, GaAs photovoltaic converters, optical transmitters and receivers, and video monitors. The power and video signals were transmitted using two 50-m multimode fibers. In addition, we proposed and tested two types of energy transformation units (ETU), which are responsible for supplying electrical energy to the IFE video monitor and the optical fiber receiver.

The primary objective of this systematic review study was to investigate the effectiveness, durability, and adverse events of PLLA treatment for aesthetic indications. The search strategy was performed in MEDLINE (Ovid). The electronic literature search of five databases was performed, from the inception of the databases until 12th of February 2024. This was to identify randomized clinical trials that assessed PLLA treatment in adult individuals exhibiting facial aging and/or facial lipoatrophy. Risk of bias was assessed using the Cochrane Risk-of-Bias Tool for Randomized Trials (RoB 2). Eleven RCTs out of 1467 identified citations were included. Four studies showed increased dermal thickness, significant improvement in facial lipoatrophy severity and aesthetic clinical scores, after PLLA treatment with its effects sustained for at least 25 months. Two studies demonstrated the superiority of PLLA over injectable human collagen. Also, three studies showed positive results favoring PLLA when compared with PH gel in lipoatrophy severity, trans epidermal water loss, skin quality, elasticity, and patient satisfaction. All adverse events were mild-to-moderate in intensity, and the main ones worth noting were bruising, hematoma, tenderness, nodules, and edema. Five out of 11 studies were considered as high risk of bias. The evidence on the effectiveness and safety of PLLA for facial rejuvenation is of low quality; thus, the reported high effectiveness, safety, and long-lasting effects for this purpose, should be further investigated.

Research has shown that emotional states may influence the subjective experience of time. The present study involved 111 healthy adult participants and examined the impact of emotional stimuli on time perception, using a time estimation task with four conditions: in one of the conditions, participants estimated the exposure time of a black screen, wherein the duration could vary be-tween 2 to 7 s (condition without emotional interference); in the other conditions, participants es-timated the exposure time (also ranging from 2 to 7 s) of images that would induce pleasant, un-pleasant, or neutral emotions, to which participants were instructed to focus their attention (pleasant, unpleasant, or neutral emotions). The results showed that participants estimated “shorter” time intervals (underestimation) for pleasant and unpleasant images compared to the condition without interference, but no significant differences were found between the neutral condition and the condition without interference. It is suggested that increased attention to an ex-ternal stimuli, regardless of its emotional valence, produces an underestimated perception of time.

Social networks have become the scenario with the greatest potential for the circulation of disinformation, hence there is a growing interest in understanding how this type of information is spread, especially in relation to the mechanisms used by disinformation agents such as bots, trolls, among others. In this scenario, the potential of bots to facilitate the spread of disinformation is recognised, however, the analysis of how they do this is still in its initial stages. Taking into consideration what was previously stated, this paper aimed to model and simulate scenarios of disinformation propagation in social networks caused by bots based on the dynamics of this mechanism documented in the literature. For achieving the purpose, System dynamics was used as the main modelling technique. The results present a mathematical model, as far as disinformation by this mechanism is concerned, and the simulations carried out against the increase in the rate of activation and deactivation of bots. Thus, the preponderant role of social networks in controlling disinformation through this mechanism, and the potential of bots to affect citizens, is recognised.

The present research intents to study the evolution of the skin fatty acids and physiological disorders through cold storage in ‘Golden Delicious’ apples treated with 1-MCP and calcium. Harvested fruit were treated with calcium chloride (Ca), 1-MCP (MCP), Ca+MCP or no treatment (control) then subjected to cold storage at 0.5 ºC for 6 months. Fatty acids composition, Malondialdehyde (MDA) and the physiological disorders bitter pit (BP), superficial scald and diffuse skin browning (DSB) were measured at harvest and after storage plus 7 days shelf-life at room temperature ≈22 ºC. Palmitic acid decreased and linoleic acid increased through time, while oleic and stearic acids had few changes. Unsaturated/saturated fatty acids and MDA increased through time, despite Ca and Ca+MCP were related to lower MDA and lower BP and rotten fruit, after cold storage and shelf-life. In those treatments, the unsaturated/saturated fatty acids were higher, mainly due to higher linoleic acid and lower palmitic acids. Further research is needed to clarify the changes in membrane properties and the effect of some treatments in response to chilling injury through storage.

The proposal that the genetic code was formed on the basis of protein synthesis directed by tRNA dimers is reviewed and updated. The tRNAs paired through the anticodon loops are an indication on the process. Dimers are considered mimics of the ribosomes – structures that hold tRNAs together and facilitate the transferase reaction, and of the translation process – anticodons are at the same time codons for each other. The primitive protein synthesis system gets stabilized when the product peptides are able to bind the producers therewith establishing a self-stimulating production cycle. The chronology of amino acid encoding starts with Glycine and Serine, indicating the metabolic support of the Glycine-Serine C1-assimilation pathway, which is also consistent with evidence on origins of bioenergetics mechanisms. Since it is not possible to reach for substrates simpler than C1 and compounds in the identified pathway are apt for generating the other central metabolic routes, it is considered that protein synthesis is the beginning and center of a succession of sink-effective mechanisms that drive the formation and evolution of the metabolic flow system. Plasticity and diversification of proteins construct the cellular system following the orientation given by the flow and implementing it. Nucleic acid monomers participate in bioenergetics and the polymers are conservative memory systems for the synthesis of proteins. Protoplasmic fission is the final sink-effective mechanism, part of cell reproduction, guaranteeing that proteins don’t accumulate to saturation, which would trigger inhibition.

In the software development process, the decision-maker (DM) has a range of problems inherent to its function. Wrong choices during software planning can bring great risk to the project. Therefore, the planning of software releases to be delivered to the customer should be well done. This is not an easy task because releases are made up of many requirements that contain complex variables that must be considered, such as precedence, cost, requirement stability, among other features that make the requirements-selection process challenging. To make this process less exhaustive, DM can use tools that facilitate this work. In software engineering, we can find fields of research specialists in this context, such as Search-Based Software Engineering (SBSE). The SBSE makes use of advanced metaheuristics to search for optimal solutions or the closest to it. In this work, we try to use another field of research to solve this same problem type, the Verbal Decision Analysis (VDA). To do this, we elaborate a workflow that will use the same source data, execute two solutions using the two search fields (SBSE and VDA) and compare the results. In the end, we evaluated and commented on the results.

The aim of this study was to assess precipitation (P) by analyzing data from in situ stations compared with those from solely remote sensing products CHIRP and CMORPH, with a reference station in the city. The evapotranspiration (ET) was analyzed directly using SSEBop. The region chosen for this study was the Metropolitan Area of Belem (MAB), close to the estuary of the Amazon River and the mouth of the Tocantins River. Belem is the rainiest state capital of Brazil, which causes a myriad of problems for the local population. The monthly best fit is shown here. In this study, we analyzed P and ET from local stations and compared them with those from satellite products. The main metrics RMSE, NRMSE, MBE, R2, Slope, and NS were used. For the reference station, the automatic and conventional CHIRP and CMORPH results, in mm/month, were as follows: automatic CHIRP: RMSE = 93,3, NRMSE = 0.32, MBE = −33,54, R2 = 0.7048, Slope = 0.945, NS = 0.5668; CMORPH: RMSE = 195,93, NRMSE = 0.37, MBE = −52,86, R2 = 0.6731, Slope = 0.93, NS = 0.4344; conventional station CHIRP: RMSE = 94.87, NRMSE = 0.32, MBE = −33.54, R2 = 0.7048, Slope = 0.945, NS = 0.5668; CMORPH: RMSE = 105.58, NRMSE = 0.38, MBE = −59.46 R2 = 0.7728, Slope = 1.007, NS = 0.4308. This was compared with the pixel and in situ station data. The ET ranges, on average, between 83 mm/month in the Amazonian summer and 112 mm/month in the Amazonian winter. This work concludes that, although CMORPH has a coarser resolution of 0.25° compared to CHIP’s 0.05° for MAB at a monthly resolution, the remote sensing products were reliable. SSEBop also showed reliable performance. For analyses of the consistency of precipitation time series, these products could provide more accurate information.

Thermal comfort is extremely important in architecture, especially in environments with more people spending longer on studies or intellectual activities. This research describes a case study to investigate university buildings' energy and thermal performance as a part of the ANEEL program. Due to this importance, and the need to save energy in Brazilian public buildings, the ANEEL-the Brazilian Energy Electricity Regulatory Agency, launched 2016 a national program focusing on energy efficiency in public universities around the country. University offices and classrooms require high intellectual effort; thus, environmental comfort is critical for maintaining its users' physical and mental health. This study included a pre-diagnosis of the performance of the envelope, lighting, and air conditioning systems and a survey about the quality of the environments from the users' point of view. The Prescriptive Method of the Brazilian Labeling Program (PBE) for Commercial, Service, and Public Buildings (RTQ-C) assessed the building performance. Statistical analysis was applied to correlate the quality and thermal preference of the users from the PMV/PPD. The results showed a high rate of thermal discomfort in both environments of the studies, even when using air conditioning.

The activity of prioritizing software requirements should be done as efficiently as possible. Selecting the most stable requirements for the most important customers for the development company can be a positive factor when we consider that the available resource does not always encompass the implementation of all requirements. Quantitative methods for reaching software prioritization in releases are many in the field of Search-Based Software Engineering (SBSE). However, we show that it is possible to use qualitative Verbal Decision Analysis (VDA) methods to solve this same type of problem. Moreover, we will use the ZAPROS III-i methods to prioritize requirements considering the opinion of the decision-maker, who will participate in this process. Finally, the results obtained in the VDA structured methods were quite satisfactory when compared to the methods using SBSE. A comparison of results between quantitative and qualitative methods will be made and discussed later.

The potential of social networks for the circulation of disinformation as a strategy of diplomacy has been of great interest to the academic community, but the way in which it is propagated and modelled is still in its beginnings. This article aimed to simulate the propagation of disinformation in social networks derived from the diplomacy strategy, based on the elements of the system. For the design of the simulation model, system dynamics was used as the main technique in the research methodology in conjunction with statistical analysis. Five computational simulations were run for the adoption methods of susceptible and uninformed population, misinformation techniques and echo chamber. The developed model found that the diplomacy disinformation agent is able to spread its message efficiently through the bot outreach mechanism and only a part of the susceptible population unsubscribes to the disinformation agent's account. Significant differences were identified in the absence of paid outreach, bots and trolls in the propagation of information, and in the variation in the timing of disinformation propagation. Consequently, the developed model allows the understanding of the problem of disinformation as a strategy of diplomacy from international rather than local dynamics, as well as the effects of the use of each element in the system.

Drying grains in a fixed bed can be an interesting alternative to prevent undesirable breaks and fractures of solids due to mechanical shocks, something that cannot be avoided when drying in moving beds. A disadvantage of fixed bed drying is that there can be significant gradients in the critical variables if the layer of particulate solids is thick. This work shows that periodically changing the direction of drying air flow is an effective technique to reduce differences within the bed and allow better uniformity of the product. Drying in a thick layer of 10 cm of sorghum grains was carried out at 50 and 60oC for air flow velocity of 2.1 m.s-1. The results showed that despite increasing the total drying time, the technique actually allowed a significant decrease in the temperature gradients and moisture content of the sorghum grains. The change in direction of the air flow caused the drying front to be displaced, sometimes towards the top, sometimes towards the base of the bed. At 50oC, drying lasted a total of 240 min, bringing the sorghum grains to an average overall moisture content of 0.13 on a dry basis.

Self-assembling peptide P11-4 is amphiphilic and pH-triggered with demonstrated effectivity repairing early carious lesions in enamel. However, P11-4 effects on dentin biomineralization and repair remain unexplored. Thus, cytocompatibility and effectiveness of P11-4 inducing mineralization and migration of odontoblast-like cells (MDPC-23) were investigated. MDPC-23 were seeded in contact with P11-4(0.5µg/ml and 1µg/ml), Dentin Matrix Protein 1 (DMP1 0.5µg/ml and 1 µg/ml) or Calcium hydroxide (Ca(OH)2 100µg/ml) solutions. Cytotoxicity was verified using MTT (n=6/group). Mineralization was tested using Alizarin Red (n=4/group). Cell migration was assessed by light microscopy (n=2/group). MTT and Alizarin Red data were compared using Krus-kal-Wallis and Mann-Whitney (α=0.05). P11-4 (0.5µg/ml and 1µg/ml) and DMP1 (0.5µg/ml and 1µg/ml) presented the highest cytocompatibility; Ca(OH)2 presented the lowest. DMP1 1µg/ml exhibited the highest mineralization ability, with no difference to P11-4 1µg/ml. Ca(OH)2 presented lower values than DMP1 1µg/ml (p<0.05), but similar to P11-4 1µg/ml. P11-4 and DMP1 at 0.5 µg/ml showed induced less mineralization than P11-4 and DMP1 at 1µg/ml (p<0.05), with no difference to Ca(OH)2. All materials stimulated cell migration, however, lower concentrations of DMP1 and P11-4 provided better results. P11-4 is cytocompatible, induces mineralization and MDPC-23 migration like DMP1. P11-4 could be an alternative for dentin mineralization and tooth repair.

The adsorption of carbon dioxide on amino silanes-functionalized MCM-41 and SBA-15 materials is reported. The functionalization of mesoporous silicas was made by post-synthesis method, by impregnation of 3-aminopropyltriethoxysilane. The obtained materials were characterized by X-ray diffraction, scanning and transmission electron microscopies, nitrogen adsorption-desorption and X-ray photoelectron spectroscopy measurements. The carbon dioxide adsorption capacities for the samples were carried out under ambient pressures. The obtained results evidenced that amino-silanes with a terminal amine (–NH₂) were functionalized through covalent coupling of this group on the surface of the channels in the ordered mesoporous silica, meaning that the amine is anchored on the surface of the bigger pores of the MCM-41 and SBA-15 support. For functionalized materials, the CO₂ adsorption capacity of the AMCM-41 increased from 0.18 to 1.1 mmol·g⁻¹, whereas for ASBA-15, it was from 0.6 to 1.8 mmol·g⁻¹. The Lagergren kinetic algorithms were applied in order to validate the obtained results, evidencing the enhanced carbon dioxide adsorption capacity and stability of the functionalized ordered mesoporous molecular sieves.

Background: A meaningful part of schizophrenia patients suffer from physiosomatic symptoms (formerly named psychosomatic) which are reminiscent of chronic fatigue syndrome and fibromyalgia (FF) and are associated with signs of immune activation and increased levels of tryptophan catabolites (TRYCATs). Aims: To examine whether FF symptoms in schizophrenia are associated with breakdown of the paracellular pathway, zonulin, lowered natural IgM responses to oxidative specific epitopes (OSEs); and whether FF symptoms belong to the behavioral-cognitive-physical-psychosocial-(BCPS)-worsening index consisting of indices of a general cognitive decline (G-CoDe), symptomatome of schizophrenia, and quality of life (QoL)-phenomenome. Methods: FF symptoms were assessed using the Fibromyalgia and Chronic Fatigue Rating scale in 80 schizophrenia patients and 40 healthy controls and serum cytokines/chemokines, IgA levels to TRYCATs, IgM to OSEs, zonulin and transcellular/paracellular (TRANS/PARA) molecules were assayed using ELISA methods. Results: A large part (42.3%) of the variance in the total FF score was explained by the regression on the PARA/TRANS ratio, pro-inflammatory cytokines, IgM to zonulin, IgA to TRYCATs (all positively) and IgM to OSEs (inversely). There were highly significant correlations between the total FF score and G-CoDe, symtopmatome, QoL phenomenome and BCPS-worsening score. FF symptoms belong to a common core shared by G-CoDe, symtopmatome, and QoL phenomenome. Discussion: The physio-somatic symptoms of schizophrenia are driven by various pathways including increased zonulin, breakdown of the paracellular tight-junctions pathway, immune activation with induction of the TRYCAT pathway, and consequent neurotoxicity. It is concluded that FF symptoms are part of the phenome of schizophrenia and BCPS-worsening as well.

Wound healing is rarely seen as a problem in healthy individuals; however, under certain pathophysiological conditions, this process can be impaired, leading to the emergence of chronic wounds, which are themselves a serious public health problem. This work aimed to review the most important and recent literature on the use of metallic nanoparticles, in this case those produced from plant extracts, and their application as healing agents. For this, we firstly provided an insight into the pathophysiology of the wound healing process and then the main routes for obtaining metallic nanoparticles. The methodology of synthesis, which is part of the so-called green synthesis, has been the subject of several studies reporting the use of medicinal plants as subtracts for the production of different nanoparticles (of silver, gold, and zinc). Additionally, their use as wound healing agents is close related with biological properties such as antimicrobial, anti-inflammatory, and healing. Finally, we addressed in vitro and in vivo studies reporting the efficiency of metallic nanoparticles synthesized with plant extracts and applied in different pharmaceutical forms on the wound healing process. Based on these satisfactory results, we verified that metallic nanoparticles are potential therapeutic alternatives when compared to the traditional synthetic healing agents, thus foreseeing the production of new drugs in the pharmaceutical market.

Purpureocillium lilacinum PL11 (formerly Paecilomyces lilacinus) is a ubiquitous fungus found in several habitats, mainly in the soil, and belongs to the Ophiocordycipitaceae family. This fungus was shown to have potential applications in agriculture as a biocontrol agent and biofertilizer. P. lilacinum can inhibit plant‒pathogenic fungi and nematodes, including root-knot and potato cyst nematodes. Additionally, P. lilacinum produces siderophores and indole-3-acetic acid (IAA), enhancing plant development and increasing soil nutrient availability. P. lilacinum has been extensively studied in various commodities, including pineapple, maize, soybean, and legume. Most studies have evaluated P. lilacinum as a biocontrol agent, especially for nematode control. Other studies have evaluated the production of secondary metabolites and bioremediation, and few studies have used this fungus as a plant growth promoter. This review addressed important aspects of using this fungus. P. lilacinum is a promising fungus that can be used for agricultural production, reducing environmental impact, and thus collaborating for a sustainable agriculture production system.

Soy isoflavones are considered important sources of bioactive compounds, but they are poorly absorbable, due to their large hydrophilic structures. Some biotransformation strategies have been used to convert the glycosidic form into aglycones, making them available for absorption. This study evaluated the potential of enzymatic and/or microbial fermentation bioprocesses in soymilk extract before and after gastrointestinal in vitro digestion. Commercial β-glucosidase and mix of commercial probiotics containing Lactobacillus acidophilus, L. casei, Lactococcus lactis, Bifidobacterium bifidum e B. lactis were used to biotransform soymilk extract. Isoflavone profile was quantified by HPLC-DAD, total phenolic content by Folin–Ciocalteu test, and antioxidant capacity by ORAC and FRAP. Soymilk enzymatically treated (ET) followed by microbial fermentation (ET+F) resulted in the conversion of glycosylated isoflavones (6-fold lower than control for daidzin and 2-fold for genistin) to aglycones (18-fold greater than control for dadzein and genistein), besides to increase the total phenolic content (3.48 for control and 4.48 mg/ml ET+F) and to improve antioxidant capacity represented by the ORAC (120 for control and 151 mg/ml ET+F) and by the FRAP (285 for control and 317 µl/ml for ET+F) before in vitro digestion. Further, the digested ET+F samples resulted a higher content of genistein (2-fold higher than control) also an increase in the total phenolic content (2.81 for control and 4.03 mg/ml for ET+F) and antioxidant capacity by ORAC were greater compared to undigested samples. In addition, the microbial fermentation process isolated also resulted in the positive effects, but de combination of ET followed by F presented a synergistic effect, suggesting the greater potential for both bioprocesses to contribute to functional and nutritional properties on fermented soy-based products.

The main challenges in oil platforms are how to define optimal setpoints and decision-making for controlling variables due to many existing dynamical production uncertainties while conceding safe operation and minimizing discharge to sea and atmosphere without killing plantwide inventory. A novel scheduling model to optimize the whole essential units of an oil platform production gathering topside and subsea variables is disclosed. A proper topside and subsea scheduling model enables and creates harmony between optimal production, supply chain, costs, and market dynamics, satisfying demands, environmental and operations constraints leading to stability. The interest of the present research lies in determining the optimal topside and subsea operational settings and decision-making, establishing maximum E&P performance and production control setpoints while predicting and manipulating reservoir lifespan and its revitalization. This objective is attained through a novel multiperiod large-scale model for the planning and operational production scheduling and model predictive control (MPC) in oil platforms complying with sustainability, profitability, platform design capacities, and offloading of oil and gas to supply chains or to pipeline exportation. The present model details heat and mass transfer, PVT, flow profiles along a planning horizon and can be used to any oil platform since comprises all the essential unit operations for oil, gas, CO₂, H₂S and water. The model maximizes the total oil production over any planning horizon. The model is versatile, and decision-making can be either linear or nonlinear but rather a MILP or LP as best choice on optimizing large-scale systems. If the model is applied with auto rescheduling on site within variable hours or minutes, it becomes a real-time optimization schedule approach. Due to its high-velocity performance and robustness, a novel multi-objective function strategy, acting as an LP generic plantwide MPC with industrial scope to maximize production while controlling the process is presented, and as an example is here used to control slug flow to avoid equipment trips and inventory instability, at the same time production is maximized. The output from the decision-making was compared to actual plant data, and the results proved compliance to the design capacity with process safety and sustainability. Comparing to official Brazil's government data for oil, the case study showed superiority to the same size platforms, like FPSOs P-75 and MV32, e.g., more than 101.5% more capacity to produce oil in beginning of campaign after first oil, and 10.5% during campaign. The present work indicates that: 1) the production of millions of barrels is being delayed or left aside; 2) not scheduling production harms the environment and diminish process safety; 3) not scheduling production can create stochastic supply chain deliveries instead of organizing it by deterministic offloading days; 4) scheduling is essential to manipulate, revitalize and monitor reservoir's pressure and content under uncertainty; 5) the oil platform can be automatic optimized by a plantwide MPC reducing human activity/dependency; 6) scheduling gives more transparency to stakeholders and contractors by forecasting business data and capability, and can design, develop or enable new businesses.

Background: There is a strong comorbidity between mood disorders and metabolic syndrome (MetS). Increased levels of reactive oxygen and nitrogen species (RONS) and nitro-oxidative stress toxicity (NOSTOX) partially underpin this comorbidity.Aims: To examine the associations of RONS/NOSTOX biomarkers with MetS after adjusting for the significant effects of mood disorders (major depression, and bipolar type 1 and 2), generalized anxiety disorder (GAD), tobacco use disorder (TUD), and male sex.Methods: The study included subjects with (n=65) and without (n=107) MetS and measured levels of superoxide dismutase 1 (SOD1), lipid hydroperoxides (LOOH), nitric oxide metabolites (NOx), malondialdehyde (MDA), and advanced oxidation protein products (AOPP) and computed z unit-weighted composite scores which reflect RONS/NOSTOX. The study included 105 patients with mood disorders, 46 with GAD, and 95 with TUD.Results: MetS was associated with increased levels of MDA and AOPP, independently from mood disorders, TUD, sex and GAD. Atherogenicity and insulin resistance (IR) were significantly associated with a NOSTOX composite score. Mood disorders, TUD, GAD, male sex and MetS independently contribute to increased RONS/NOSTOX. The RONS/NOSTOX profile of MetS was different from that of GAD, which showed increased SOD1 and NOx levels. TUD was accompanied by increased SOD1, LOOH and MDA, and male sex by increased LOOH and AOPP.Conclusions: MetS is characterized by increased lipid peroxidation with aldehyde formation and chlorinative stress, and atherogenicity and IR are strongly mediated by RONS/NOSTOX. Partially shared RONS/NOSTOX pathways underpin the comorbidity of MetS with mood disorders, GAD, and TUD.

Introduction: Decompensated heart failure (HF) is a complex and debilitating syndrome, which constitutes a severe emergency condition with high morbidity and mortality. The kidneys play fundamental roles in the pathophysiology of HF and, in the context of decompensations, acute kidney injury (AKI) has a bilateral cause-and-effect relationship, which can significantly worsen prognosis. However, the interaction between AKI and decompensated HF is poorly understood. Objective: This study aimed to assess the occurrence of AKI in patients hospitalized due to decompensated HF and to analyze its prognostic impact during hospitalization. Methods: Prospective single-center observational study that included patients hospitalized due to decompensated HF in a tertiary-level teaching hospital, conducted between July 2017 and January 2020. Patients who developed AKI during hospitalization were compared with those who did not develop it, until hospital discharge or death. AKI was defined as a serum creatinine increase greater than or equal to 0.3 mg/dl in 48 hours, a 1.5-fold increase in baseline creatinine in seven days or urinary volume <0.5 ml/kg/h during six hours, according to the Acute Kidney Injury Network (AKIN) criteria. The endpoints analyzed were death, need for invasive mechanical ventilation (IMV) and length of hospital stay. The Wilcoxon, Mann-Whitney and unpaired student t tests were used. Results: Ninety-nine patients were included, with a mean age of 65.4 ± 14 years, of which 47 (47.5%) were male and 52 (52.5%) were female. Reduced ejection fraction was observed in 77.8% of patients, whilst 22.2% had a diagnosis of HF with preserved EF. The decompensation clinical classifications were: dry and warm = 7 (7.1%), wet and warm = 72 (72.7%), wet and cold = 15 (15.1%) and dry and cold = 5 (5.1%). The average left ventricular ejection fraction was 38.3% ± 15. AKI ocurred in 22 patients (22.2%). Comparison between patients who evolved with and without AKI showed higher mortality (36.4% vs 10.4%, p = 0.004) and the need for IMV (54.5% vs 13%, p = 0.0001) in the first group. There was no significant difference regarding the length of in-hospital stay (22.9 ± 19 vs 18.8 ± 16 days, p = 0.26). Conclusions: The occurrence of AKI was frequent in patients with decompensated HF requiring hospitalization, affecting approximately one out of five patients. This complication was significantly associated with increased mortality and the need for IMV during hospitalization.

The abundant use of lithium-ion batteries (LIBs) in a wide variety of electric devices and vehicles will generate a large number of depleted batteries, which contain several valuable metals such as Li, Co, Mn, and Ni present in the structure of the cathode material (LiMO2). The present work investigates chemical, technological, and environmental aspects in the treatment of such wastes, development of a methodology for the extraction of lithium, cobalt, nickel, manganese, and graphite by a carbochlorination pyrometallurgical process. Mixtures of cathode and anode materials (called black mass, mixed oxides of Li, Co, Ni, Mn, and graphite) from different LIBs, carbon black (as reducing agent), and CaCl2 (as chlorinating agent) were used. Non-isothermal thermogravimetric tests up to 850°C and isothermal tests at 700°C of the mixtures in an inert atmosphere were carried out. It was experimentally observed that the LiMO2-C-CaCl2 reaction takes place at 700°C. LiCl, Ni, and Co were obtained as final products, and to a lesser extent, CoO, NiO, and MnO2. CaCO3 was also obtained as a by-product. The obtained results show that carbochlorination is an efficient and effective alternative route for the extraction and recovery of metals from different LIBs, focused on the sustainability and circular economy

Turner syndrome (TS) is caused by a complete or partial absence of an X or Y chromosome, including chromosomal mosaicism, affecting 1 in 2,500 female live births. Sister chromatid exchange (SCE) is used as a sensitive indicator of spontaneous chromosome instability. Cells from mosaic patients constitute useful material for SCE evaluations as they grow under the influence of the same genetic background and endogenous and exogenous factors. We evaluated proliferation dynamics and SCE frequencies of 45,X and 46,XN cells of 17 mosaic TS patients. In two participants, 45,X cells exhibited a proliferative disadvantage in relation to 46,XN cells after 72h of cultivation. The analysis of mean PI showed significant differences between 45,X and 46,XN lineages; however there were no intraindividual differences. On the other hand, mean SCE frequencies showed no differences between the two lineages, but there were intraindividual differences in 5 patients. The absence of mean SCE frequency differences between 45,X and 46,XN lineages may indicate that both were equally unstable, as more than 70% of the 46,XN lineages had an anomalous karyotype. However, 46,XN had a higher mean PI, suggesting that the amount of cells with a karyotype distinct from 45,X may increase with time in mosaic TS women.

In this study, we performed a bibliographical review examining the scientific literature on “feeding in Anthozoa” theme for the period from 1890 to 2019, using scientific databases (Google Scholar) supplemented with additional literature. This study categorized published scientific papers on this topic by decade of publication, target taxa, variability of species studied in each order and main themes studied. As a result, 153 studies were found, and based on their content, it was observed that within Anthozoa, there has been a concentration of feeding studies on species in the orders Actiniaria (Hexacorallia), Scleractinia (Hexacorallia), and Alcyonacea (Octocorallia). This indicates that the other remaining orders of the group have been comparatively neglected with regards to their feeding aspects. Therefore, as data on feeding in some groups of Anthozoa are scarce, studies need to be carried out to fill the gaps that permeate this important benthic group, in order to better understand their ecology.

Circular Economy involves structural changes in traditional business models and consumers’ behaviour toward recycled products. The recycling of PET products has been increasing but there is still a gap between consumption and demand for PET packaging in Brazil. In this research, the waste reduction was examined under a projective scenario to the current ecological purposes in Brazil for reducing environmental pollution. In that manner, this paper aimed to comprehend the intention to purchase recycled PET products of Brazilian consumers. With a non-probabilistic and convenience sample, the study counts 422 participants. The method employed was based on Structural Equation Modelling and Partial Least Squares, used to test the hypotheses of causality among the variables. Results showed the perception of low quality about recycled products reduced consumers’ intention to purchase. Also, the sustainability of recycled products positively influenced the intention to purchase. In addition, recycled products presented a negative impact on the perceived safety, which could influence the purchase of recycled products in Brazil. We conclude that the image that Brazilian consumers have about recycled products positively affects the intention to purchase.

The hemodynamic activity of Melipona flavolineata workers was evaluated during restraint stress for a period of 30 minutes. The observed parameters were power variation in the elapsed time, and subsequently six periods of one second were divided and called: A, B, C, D, E and F; in each period the electrocardiographic parameters were evaluated: Heart rate, Amplitude, R-R Interval, Duration of QRS and Q-T interval. The experiment was carried out with 8 worker bees of M. flavolineata, for which electrodes with nickel-chromium alloy were made. The bees were previously anesthetized with isoflurane and properly contained and fixed in a base for stereotaxis in which the electrode was implanted. All these procedures were performed inside a Faraday cage. The results showed power oscillations during the recording with the highest energy level between 300 and 600 s. Heart rate, QRS amplitude and QRS duration parameters underwent changes recorded during the restraint stress period. However, for the Q-T interval there was no difference during the recordings. Thus, the cardiac activity of M. flavolineata can be used as a biomarker and being used to clarify physiological issues or alterations caused by toxic agents and indicate risk factors for these animals.

Current diagnoses of mood disorders are not cross validated. The aim of the current paper is to explain how machine learning techniques can be used to a) construct a model which ensembles risk/resilience (R/R), adverse outcome pathways (AOPs), staging, and the phenome of mood disorders, and b) disclose new classes based on these feature sets. This study was conducted using data of 67 healthy controls and 105 mood disordered patients. The R/R ratio, assessed as a combination of the paraoxonase 1 (PON1) gene, PON1 enzymatic activity, and early life time trauma (ELT), predicted the high-density lipoprotein cholesterol – paraoxonase 1 complex (HDL-PON1), reactive oxygen and nitrogen species (RONS), nitro-oxidative stress toxicity (NOSTOX), staging (number of depression and hypomanic episodes and suicidal attempts), and phenome (the Hamilton Depression and Anxiety scores and the Clinical Global Impression; current suicidal ideation; quality of life and disability measurements) scores. Partial Least Squares pathway analysis showed that 44.2% of the variance in the phenome was explained by ELT, RONS/NOSTOX, and staging scores. Cluster analysis conducted on all those feature sets discovered two distinct patient clusters, namely 69.5% of the patients were allocated to a class with high R/R, RONS/NOSTOX, staging, and phenome scores, and 30.5% to a class with increased staging and phenome scores. This classification cut across the bipolar (BP1/BP2) and major depression disorder classification and was more distinctive than the latter classifications. We constructed a nomothetic network model which reunited all features of mood disorders into a mechanistically transdiagnostic model.

Eutrophication, a global concern, impacts water quality, ecosystems, and human health. It’s crucial to monitor algal blooms in freshwater reservoirs, as they indicate the trophic condition of a waterbody through Chlorophyll-a (Chla) concentration. Traditional monitoring methods, however, are expen-sive and time-consuming. Addressing this hindrance, we developed models using remotely sensed data from the Sentinel-2 satellite for large-scale coverage, including its bands and spectral indexes, to estimate the Chla concentration on 149 freshwater reservoirs in Ceará, Brazil. Several machine learning models were trained and tested, including k-nearest neighbours, random forests, extreme gradient boosting, the least absolute shrinkage, group method of data handling (GMDH), and sup-port vector machine models. A stepwise approach determined the best subset of input parameters. Using a 70/30 split for the training and testing datasets, the best-performing model was the GMDH, achieving an R2 of 0.91, MAPE of 102.34%, and RMSE of 20.38 g/L, which are values consistent with the ones found in the literature. Nevertheless, the predicted Chla concentration values were most sensitive to the red, green, and near infra-red bands.

Mutation in the ethionamide (ETH) activating enzyme, EthA, is the main factor determining resistance to this drug, used to treat TB patients infected with MDR and XDR Mycobacterium tuberculosis isolates. Many mutations in EthA of ETH resistant (ETH-R) isolates have been described but their roles in resistance remain uncharacterized, partly because structural studies on the enzyme are lacking. Thus, we took a two-tier approach to evaluate two mutations (Y50C and T453I) found in ETH-R clinical isolates. First, we used a combination of comparative modeling, molecular docking, and molecular dynamics to build an EthA model in complex with ETH that has hallmark features of structurally characterized homologs. Second, we used free energy computational calculations for the reliable prediction of relative free energies between the wild type and mutant enzymes. The ΔΔG values for Y50C and T453I mutant enzymes in complex with FADH₂-NADP-ETH were 3.34 (+/−0.55) and 8.11 (+/−0.51) kcal/mol, respectively, compared to the wild type complex. The positive ΔΔG values indicate that the wild type complex is more stable than the mutants, with the T453I complex being the least stable. These are the first results shedding light on the molecular basis of ETH resistance, namely reduced complex stability of mutant EthA.

Different therapeutic strategies have been investigated to target and eliminate HIV-1-infected cells by using armed antibodies specific to viral proteins, with varying degrees of success. Herein, we propose a new strategy by combining photodynamic therapy (PDT) with HIV Env-targeted immunotherapy, and refer to it as HIV photoimmunotherapy (PIT). A human anti-gp41 antibody (7B2) was conjugated to two photosensitizers with different charges through different linking strategies; “Click” conjugation by using an azide-bearing porphyrin attached via a disulfide bridge linker with a drug-to-antibody ratio (DAR) of exactly 4, and “Lysine” conjugation by using phthalocyanine IRDye 700DX dye with average DARs of 2.1, 3.0 and 4.4. These photo-immunoconjugates (PICs) were compared via biochemical and immunological characterizations regarding the dosimetry, solubility, and cell targeting. Photo-induced cytotoxicity of the PICs were compared using assays for apoptosis, reactive oxygen species (ROS), photo-cytotoxicity, and confocal microscopy. Targeted phototoxicity seems to be primarily dependent on the binding of PS-antibody to the HIV antigen on the cell membrane, whilst being independent of the PS type. This is the first report of the application of PIT for HIV immunotherapy by killing HIV Env-expressing cells.

The present work proposed a low-cost portable device as an enabling technology for Smart Farms using multispectral imaging and Machine Learning in soil texture. Clay is an important factor for the verification and monitoring of soil use due to its fast reaction to chemical and surface changes. The system developed uses the analysis of reflectance in wavebands for clay prediction. The selection of each wavelength is performed through an LED lamp panel. A NoIR microcamera controlled by a Raspberry Pi device is employed to acquire the image and unfold it in RGB histograms. Results showed an good prediction performance with R2 of 0.96, RMSEC of 3.66% and RMSECV of 16.87%. The high portability allows the equipment to be used in a field providing strategic information related to soil sciences.

Leisure-time physical activity (LTPA) is associated with access and use of public open spaces. The “President João Goulart Elevated Avenue” and current denominated “Minhocão” is a facility for leisure activities that are open for people during the night/weekends. The aim of this study was to examine if the prevalence of LTPA among individuals living in the surroundings of Minhocão is different according to proximity to, and use of, the facility. We conducted a cross-sectional study with cluster sampling with people aged ≥18 years who lived in households until 500m and between 501m to 1500m of Minhocão. The survey was conducted between December/2017 until March/2019 with an electronic questionnaire self-responded. We conducted bivariate analysis and Poisson regression to examine possible differences in LTPA according to the proximity of residences and use of Minhocão. The analysis used post-stratification weights. A total of 12,030 telephone numbers of people were drawn (≤500m = 6,942; and &gt;500m to ≤1500m = 5,088). The final sample analyzed were of 235 residents who returned the questionnaires. There was a higher prevalence of individuals engaging in at least 150 minutes per week of LTPA among users than non-users (Prevalence Ratio=2.23, IC95%1.72-2.90). People who used the park had higher prevalence of all types of LTPA than non-users. The results can serve to inform government decision-making on the future of Minhocão.

This study aimed to quantify the extent of heavy metal, non-metal and metalloid level of Campomanesia adamantium pulp obtained from area crossed by road of the high large vehicle traffic and intensive agriculture modern farm, and for monitoring the health risks associated with pulp human consumption. For this purpose, three spots located between this area, ripe fruits were collected in roadside, bush and margin-farm. Pulp samples were digested by microwave-assisted equipment, and mineral elements were quantified by ICP OES. The mineral elements average demonstrated no statistical difference observed between this pulp (p > 0.05). The heavy metals and metalloid concentrations that exceeded FAO/WHO standards are ordered Pb > As > Mo > Co > Ni > Mn > Cr. Therefore, among these metalloid and heavy metals, As, Pb and Cr were found higher in farm-margin > roadside > bush (1.5 × 10^-3, 1.1 × 10^-3 and 6.2 × 10^-4) respectively. Therefore, As is the most important metalloid with higher levels in farm-margin, roadside and bush (1.5 × 10^-3, 1.1 × 10^-3 and 6.2 × 10^-4 > 10^-6–10^-4 and 3.33, 2.30 and 1.34 > 1) respectively, to total cancer risk and hazard quotient, if 100 g daily of pulp are consumed.

Disposing pollutants into water sources has posed risks to human health and the environment, and biosorption has emerged as an eco-friendly, cost-effective, and green alternative for wastewater treatment. This work shows banana peel powder (BPP) biosorbents for efficient sorption of methylene blue (MB), atrazine, and glyphosate pollutants. The biosorbent highlights several surface chemical functional groups and morphology containing agglomerated microsized particles and microporous structures. BPP showed 66% elimination of MB in 60 min, with an adsorption capacity (qe) of ~33 mg g-1, where a combination of film diffusion and chemisorption governed the sorption process. Besides, the biosorbent removed 91% and 97% of atrazine and glyphosate pesticides after 120 min, with qe of 3.26 and 3.02 mg g-1, respectively. The glyphosate and atrazine uptake best followed the Elovich and pseudo-first-order kinetic, respectively, revealing different sorption mechanisms. Our results suggest that BPP are low-cost biomaterials for green and environmentally friendly wastewater treatment.

The topography and chemical composition modification of the titanium (Ti) implants play a decisive role in improving biocompatibility and bioactivity, accelerating osseointegration, and, thus, determining clinical success. In spite of the development of surface modification strategies, bacterial contamination is a common cause of failure. The use of systemic antibiotic therapy does not guarantee action at the contaminated site. In this work, we proposed a surface treatment for Ti implant that aim to improve its osseointegration and reduce bacterial colonization in surgery site due to local release of antibiotic. The Ti disks were hydrothermally treated with 3M NaOH solution to form a nanostructured layer of titanate on the Ti surface. Metronidazole was impregnated on these nanostructured surfaces to allow its local release. The samples were coated with poly(vinyl alcohol) - PVA films with different thickness to evaluate a possible control of drug release. Gamma irradiation was used to crosslink the polymer chains leading to a hydrogel layer formation and to sterilize the samples. The samples were characterized by XRD, SEM, FTIR, contact angle measurements, “in vitro” bioactivity, and drug release analysis. The alkaline hydrothermal treatment successfully produced intertwined, web-like nanostructures on the Ti surface, providing wettability and bioactivity to Ti samples (Ti+TTNT samples). Metronidazole was successfully loaded and released from Ti+TTNT samples coated or not with PVA. Although the polymeric film acted as a physical barrier to drug delivery, all groups reached the minimum inhibitory concentration for anaerobic bacteria. Thus, the surface modification method presented is a potential approach to improve the osseointegration of the Ti implant and to associate local drug delivery to dental implants, preventing early infections and bone failure.

This article presents a systematic mapping study dedicated to conduct a literature review on machine learning and IoT applied in the identification of diseases through heart sounds. This research was conducted between January 2010 and July 2021, considering IEEE Xplore, PubMed Central, ACM Digital Library, JMIR- Journal of Medical Internet Research, Springer Library, and Science Direct. The initial search resulted in 4,372 papers, and after applying the inclusion and exclusion criteria, 58 papers were selected for full reading to answer the research questions. The main results are: of the 58 articles selected, 46 (79.31%) mention heart rate observation methods with wearable sensors and digital stethoscopes, and 34 (58.62%) mention care with machine learning algorithms. The analysis of the studies based on the bibliometric network generated by the VOSviewer showed in 13 studies (22.41%) a trend related to the use of intelligent services in the prediction of diagnoses related to cardiovascular disorders.

Ensuring the security of vertical applications in fifth-generation (5G) mobile communication systems and previous generations is crucial. These systems must prioritize maintaining the confidentiality, integrity, and availability of services and data. Examples of vertical applications include smart cities, smart transportation, public services, Industry 4.0, smart grids, smart health, and smart agriculture. Each vertical application has specific security requirements and faces unique threats within the mobile network environment. Thus, it is essential to implement comprehensive and robust security measures. This approach helps minimize the attack surface and effectively manage risks. This survey thoroughly examines mobile networks and their security challenges in vertical applications, shedding light on associated threats and potential solutions. Our study considers the interplay between security considerations in 5G, legacy networks, and vertical applications. We emphasize the challenges, opportunities, and promising directions for future research in this field and the importance of securing vertical applications in the evolving landscape of mobile technology.

Soil water infiltration is an important component of the hydrological cycle and it is best evaluated when the raindrop is impacted on the ground surface. For this reason, it is affected by changes in land use and occupation, and by the characteristics and physical-hydric properties of the soil. This study aimed to evaluate soil water infiltration in areas occupied with annual crops (soybean and corn) and pastures, in two watersheds of the Teles Pires River-MT, using simulated rainfall, physical models and principal component analysis. Infiltration rates were evaluated from simulated rainfall with an average intensity of 75 mm h-1, with 4 repetitions per region (upper, middle and lower) of the hydrographic sub-basins of the Caiabi and Renato rivers, and soil use with cover, without cover and disturbed. Soil tillage provided higher water infiltration rates into the soil, especially in pasture areas in the two hydrographic sub-basins. There were significant adjustments of the mathematical models to the infiltration rate data for all land use and land cover conditions. The soil attributes that most interfered with the infiltration rate were microporosity, soil density and total porosity in the crop areas of the middle Caiabi, and microporosity, clay content, total porosity and silt content in the areas farming at the source of the Renato River. The Horton and Philip models presented the best adjustments in the hydrographic sub-basins of the Renato and Caiabi and Renato rivers, being recommended for estimating the rate of water infiltration into the soil in different uses, coverages, and regions.

Acacia dealbata Link, named Mimosa in Portugal, is an invasive hardwood species with potential for construction use, but research is limited. The available stock of small-diameter juvenile wood (sjw) logs can help reduce this gap, but tangential cracking at log ends challenges fastener connections. This study evaluated different treatments to control and reduce end-face cracking in sjw logs during air drying, an economical and environmentally friendly procedure. Extreme two-thirds of sixteen Mimosa logs were subjected to two treatments: one with longitudinal kerfs 15 mm deep along the length (2 and 3 kerfs) and the other with a hollow in the centre up to half the length (16 mm and 30 mm diameters). Over 219 days of air drying and compared with the central part, kerfing treatments significantly reduced outer wood tangential cracking (p &lt; 0.001), with the 3-kerf also reducing crack numbers (p &lt; 0.05) but increasing significantly cracks near the pith (p &lt; 0.01). The 30 mm central hollow significantly reduced central perforation cracking (p &lt; 0.05). Results suggest that a combined treatment approach could help mitigate cracking, enhancing the suitability of wild Mimosa logs for construction use.

This study analyzes the relevance of governance structure for efficiency in revenue collection by Brazilian Water Utilities (WUs). Data was collected from the National Information System on Sanitation (SNIS) for 127 Brazilian WUs, covering a balanced longitudinal panel from 2018 to 2022. Governance structures evaluated included Ownership (public or private) and Corporatization (publicly traded or not). In scientific databases, we did not find studies on the efficiency of specific WUs in collecting customer bills for services rendered and its relationships with this type of governance; thus, this would be the main innovative contribution of the study to the previous literature. In the first stage, the study utilized the Dynamic Slack Based Model (DSBM) to assess revenue collection efficiency. In the second stage, an econometric model with Generalized Estimating Equations (GEE) to explain the efficiency. The findings revealed a global average inefficiency of 50.47% in revenue collection. Corporatization was linked to higher collection efficiencies, while ownership type was significant, but with lower collection efficiency. Factors such as tariff accessibility, urbanization, and the COVID-19 pandemic also influenced efficiency. The study suggests regulatory bodies should consider these insights to implement policies that prevent inefficiencies from affecting the tariff system for services.

2019-n-CoV is the seventh coronavirus known to infect humans and cause serious illness, and due to its lethality there was a worldwide mobilization for the development of new drugs and new vaccines for Covid-19. Therefore, the present work aims to carry out a virtual screening of terpenes with potential anti SARS-CoV-2 activity. To perform the ligand-based virtual, a model was constructed regarding the compounds which already showed inhibitory activity of the SARS-CoV-2. The test series corresponded to terpenes isolated in the Fabaceae Family. The compounds that were most likely to activity were subjected to Molecular Docking and the best poses obtained were subjected to Molecular Dynamics (MD) simulations carried. The molecules under study were submitted to in vitro evaluation to assess inhibitory activity of compounds against SARS-CoV-2 in a phenotypic screening model of the virus. The compounds selected by in silico screening corresponded to triterpenoids from the lupane series. In the in vitro test, both demonstrated activity against the SARS-CoV-2 virus. The virtual screening performed managed to identify the compounds with the highest probability of activity, as well as the most stable compounds, and the method used was validated by the in vitro study carried out.

The delivery of therapeutical molecules through the skin, particularly to its deeper layers is impaired due to the stratum corneum layer, which acts as barrier to foreign substances. Thus, for the past years, scientists have focused on the development of more efficient methods to deliver molecules to skin distinct layers. Microneedles, as a new class of biomedical devices, consists on an array of microscale needles. This particular biomedical device had been drawing attention due to their ability to breach the stratum corneum, forming micro-conduits to facilitate the passage of therapeutical molecules. The microneedle device has several advantages over conventional methods, such as better medication adherence, easiness and painless self-administration. Moreover, it is possible to deliver the molecules swiftly or over time. Microneedles can vary in shape, size and composition. The design process of a microneedle device must take in account several factors, like the location delivery, the material and manufacturing process. Microneedles have been used in a large number of fields from drug and vaccine application, cosmetics, therapy, diagnosis, tissue engineering, sample extraction, cancer research, wound healing, among others.

The increasing world steel production has contributed to the generation of million tons of mining residues. But, the huge demand of aggregates for the execution of pavements and the lack of raw material for this purpose, the research for new materials to be used in this area has become vital. The sandy residue that was studied was collected at Mariana– MG county, which was the result of the iron ore processing of the company Samarco S.A. This research has as objective the evaluation of the mechanical behaviour of asphalt mixtures utilizing residue from the processing of iron ore in substitution of the fine aggregate in the asphalt mixtures of the Asphaltic Concrete type, aiming its use in the rolling layer of a road pavement. To do so, the Marshall dosage of three asphalt mixtures and the mechanical tests characterized by the resilient modulus and fatigue life at a controlled tension were performed. It was also performed the determination of the optimum content by the Superpave dosage method conducted in two of these mixtures to obtain the Compaction Index and the mechanical behaviour by the Flow Number value. Concluded that the residue is compatible with all current standards for the use in asphalt mixtures, being able to be used in the CBUQ rolling layer, showing an improvement in the behaviour compared to the standard mixture.

BDD is a hoof disease characterized by inflammation of the second and fifth accessory digits and the skin in this region. This pathology is scarcely described in the literature; however, it has recently been observed in beef cattle in the Amazon Biome region. The objective of this study was to identify the epidemiological factors associated with BDD onset in cattle in the analyzed biome. Samples were collected from eight farms with extensive breeding systems located in Xinguara, Rondon do Pará, Curionópolis, and Ipixuna do Pará, in the state of Pará, Brazil. A total of 706 Nellore and Nellore crossbred with taurine animals of both sexes were evaluated, with males aged between 2–4 years and a mean weight of 650 kg and females aged between 2–11 years and a mean weight of 400 kg. Distal extremities were inspected during cattle management, and in case of accessory digit lesions, a specific examination was carried out after proper restraint. Animals were diagnosed with BDD in all farms analyzed. Of the 706 cattle inspected, 49 (6.94%) showed BDD, of which 19 (38.77%) were Nellore and 30 (61.22%) were crossbred. This was the first study to determine BDD’s occurrence in extensive farming systems in the Amazon region, also showing that pastures with large amounts of stumps and stones, the physical structure of pens, and trauma and injury incidence during animal management are the most important predisposing factors for the onset of BDD.

The epidemiological and clinical pathological aspects of polioencephalomalacia (PEM) in five buffaloes (buffaloes 01 to 05) in the amazon biome are described. Epidemiological data were obtained during the clinical visit in which the animals with clinical signs compatible with polioencephalomalacia were submitted to a general and specific clinical examination of the nervous system. During the necropsy of the five animals, the intensity and location of the lesions were evaluated and fragments from different organs were collected and fixed in 10% buffered formalin and sent to the Pathological Anatomy Sector of the Federal Rural University of Rio de Janeiro for histopathological examination. Of the five studied animals, all were of the Murrah breed, four male and one female, with ages ranging from two months to one year. Two buffaloes (buffalo 01 and 02) were from the municipality of Castanhal, Pará, kept in an extensive breeding system on Urochloa brizantha pasture. Buffaloes 03 and 04 belonged to a property located in the municipality of Cachoeira do Arari, Marajó Island, Pará, and buffalo 05 was from a property located in the municipality of Itaubal, state of Amapá, all of them were raised in an extensive system in flooded of native pasture. At the clinical examination, all buffaloes had a body score between 2.5 and 3 (scale from 1 to 5), and there was noted decreased alertness, postural changes, marked hypermetria when stimulated to move, total or partial blindness demonstrated by colliding to the corral structures, head pressing and circumduction of the hindquarters when supported on the forelimbs, opisthotonos, muscle tremors, convulsions, paddling movements, sialorrhea, decrease in palpebral and pupillary reflexes and eyeball rotation placing the pupillary slit in a vertical position. At necropsy, mild lesions characterized by edema and flattening of the cerebral convolutions were observed. Histopathological examination showed laminar necrosis of the cerebral cortex. The diagnosis of polioencephalomalacia was based on epidemiological, clinical-pathological, and histopathological findings, similar to findings in other ruminants. The cause of polioencephalomalacia in the studied buffaloes was not established, which indicates the need for further studies to elucidate this disease in the species, mainly in the Amazon region.

The coronavirus disease 2019 (COVID-19) pandemic, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has spread rapidly to most parts of the world, causing high numbers of deaths and significant social and economic impacts. SARS-CoV-2 is a novel coronavirus with a suggested zoonotic origin and with the potential for cross-species transmission among animals. Antarctica can be considered the only continent free of SARS-CoV-2 although at the end of the 2019-2020 tourist season, at least one SARS-CoV-2 positive tourist visited the Antarctic Peninsula. Therefore, concerns have been expressed regarding the potential human introduction of this virus to the continent through the activities of research or tourism with potential effects including those related to human health, but also the potential for virus transmission to Antarctic wildlife. This reverse-zoonotic transmission risk to Antarctic wildlife is assessed considering the available information on host susceptibility, dynamics of the infection in humans, and contact interactions between humans and Antarctic wildlife. Measures to reduce the risk are proposed as well as the identification of knowledge gaps related to this issue.

The use of recombinant bovine somatotropin (rbST) leads to an increase, in variable amounts, of milk production in buffalo, but there is a lack of information on the influence of rbST on their metabolism. This study looked at the effects of a single 500 mg dose of rbST on lipid profile, liver and kidney function and physical, chemical and cellular constitution of milk in 14 buffalo over 14 days, from the 100th day of lactation, and compared them with 14 animals in a control group. From the 1st day after rbST, there was a rise in beta hydroxybutyrate (β-HBO), possibly due to the higher dry matter intake or by biotransformation of NEFA into β-HBO. Treatment did not influence blood glucose, non-esterified fatty acids (NEFA), triglycerides, cholesterol, total protein, albumin, AST, GGT, bilirubin, urea or creatinine. In 71.3% of the buffalo there was a gradual increase in milk production with maximal response in the first week that was then followed by a gradual decrease, whilst in 21.4%, the increase in production occurred between 7 and 10 days, and only 7.1% of animals did not respond. On the 3rd, 5th, 7th and 10th days after treatment, an increase was found in milk production between the two groups equal to 1.04, 1.52, 1.42 and 1.06 liters, respectively. In relative terms this means an increase in milk production, respectively, of 15.1%; 21.0%; 19.8 % and 15.1 %. The constitution of the milk showed no difference in the amounts of fat, lactose, total solids or somatic cell count; however, on the 3rd day after rbST, there was a decrease in protein; notably, from the 5th day, protein values show no statistical difference. It can be concluded that the application of rbST in buffalo from the 100th day of lactation is metabolically safe, since the treatment neither caused imbalances in fat metabolism nor overloaded the liver or renal function, and the changes in milk composition were transient and limited to a decrease in milk protein.

The enteric nervous system is affected by inflammatory bowel diseases (IBD). Gut microbiota ferment dietary fibers and produce short-chain fatty acids, such as Butyrate, which bind to G protein-coupled receptors, such as GPR41, and contribute to maintaining intestinal health. This work aimed to study the GPR41 in myenteric neurons and analyze the effect of Butyrate in mice submitted to experimental ulcerative colitis. The 2, 4, 6 trinitrobenzene sulfonic acid (TNBS) was injected intrarectally in C57BL/6 mice (Colitis). Sham group received ethanol (vehicle). One group was treated with 100mg/kg of Sodium Butyrate (Butyrate), and the other groups received saline. Animals were euthanized 7 days after colitis induction. Analyzes demonstrated colocalization of GPR41 with neurons immunoreactive (-ir) to nNOS and ChAT-ir, and absence of colocalization of the GPR41 with GFAP-ir glia. Quantitative results demonstrated losses of nNOS-ir, ChAT-ir, and GPR41-ir neurons in Colitis group, and Butyrate treatment attenuated neuronal loss. The number of GFAP-ir glia increased in Colitis group, whereas Butyrate reduced the number of these cells. In addition, morphological alterations observed in Colitis group were attenuated in Butyrate group. The presence of GPR41 in myenteric neurons was identified and the treatment with Butyrate attenuated the damage caused by experimental ulcerative colitis.

Taking into account the growing interest in microalgae to be used as raw material for biodiesel production, this research is aimed at analyzing the rheological behaviour of microalgae suspensions (Chlorella sp) at different culture times under eight different conditions (temperature, salinity and CO₂, NO₃ and PO₄ levels) in order to estimate the energy demands of each step, with the purpose of optimizing a continuous feed tubular bioreactor construction. For each condition, it was calculated the biomass and oil yields, so as to correlate these results with rheological parameters. The suspension results indicated that the microalgae Chlorella sp is a non-Newtonian material with dilatant characteristics; the processing time hardly exerted an influence on the rheograms of the suspension of the microalgae Chlorella sp, except for the simultaneous conditions of low salinity and low CO₂ content; NO₃ and PO₄ contents and the amount of supplements influenced the rheological parameters of the suspension of the microalgae Chlorella sp, when in low concentration of CO₂ and low salinity levels.

Postmenopausal abnormal uterine bleeding is a common clinical problem addressed in gynecological practice and should prompt clinical investigation due to the significant prevalence of malignant and premalignant lesions of endometrium in this age group. Nevertheless, other causes should be considered since its diagnostic and therapeutic management may differ considerably. Here, we present a case of a colouterine fistula due to chronic diverticulitis presenting with postmenopausal abnormal uterine bleeding. This is extremely rare and is caused by the rupture of a diverticular abscess into the uterine wall, resulting in an inflammatory adhesion of the colon and uterus, with necrosis and subsequent fistula formation. The clinical presentation is variable and may include abdominal pain, gastrointestinal tract symptoms, vaginal discharge and abnormal uterine bleeding. The laboratory and imaging techniques may be not completely conclusive and definitive diagnosis can be made intraoperatively. There are different treatment options, being the en bloc resection and primary anastomosis the most used, allowing complete treatment. The prognosis for a colouterine fistula secondary to diverticulitis is excellent after surgery. This case highlights the importance of clinical suspicion of an unusual cause of uterine bleeding and an effective and multidisciplinary approach that allowed complete surgical treatment and patient recovery.

In schizophrenia, a single latent trait underlies psychosis, hostility, excitation, mannerism, negative (PHEMN) symptoms, formal thought disorders (FTD) and psychomotor retardation (PMR). Schizophrenia is accompanied by a breakdown of gut and blood-brain-barrier (BBB) pathways, increased tryptophan catabolite (TRYCAT) levels, bacterial translocation, and lowered natural IgM and paraoxonase (PON)1 activity. The aim of this study was to examine the factor structure of schizophrenia symptom domains and the biomarker correlates of these factors. We recruited 80 patients with schizophrenia and 40 healthy subjects and assessed the IgA/IgM responses to paracellular/transcellular (PARA/TRANS) ratios, IgA responses to TRYCATs, natural IgM to malondialdehyde and Gram-negative bacteria, and PON1 enzymatic activity.Direct Hierarchical Exploratory Factor Analysis showed a bifactorial oblique model with a) a general factor which loaded highly on all symptom domains, named overall severity of schizophrenia (“OSOS”); and b) a single-group factor (SGF) loading on negative symptoms and PMR. We found that 40% of the variance in the OSOS score was explained by IgA/IgM to PARA/TRANS ratio, male sex and education while 36.9% of the variance in SGF score was explained by IgA to PARA/TRANS, IgM to Gram-negative bacteria, female sex (positively associated) and IgM to MDA, and PON1 activity (negatively associated). Schizophrenia phenomenology comprises two biologically-validated dimensions, namely a general OSOS dimension and a single-group negative symptom dimension, which are associated with a breakdown of gut/BBB barriers, increased bacterial translocation and lowered protection against oxidation, inflammation and bacterial infections through lowered PON1 and natural IgM.