Demand for niobium and tantalum is increasing exponentially as these are essential ingredients for the manufacture of, among others, capacitors in technological devices and ferroniobium. Mine tailings rich in such elements could constitute an important source of Nb and Ta in the future and so alleviate potential supply risks. This paper evaluates the possibility of recovering niobium and tantalum from the slags generated during the tin beneficiation process of mine tailings from the old Penouta mine, located in Spain. To do so, a simulation of the processes that would be required to beneficiate and refine both elements is carried out. After tin carbothermic reduction, the slags are sent to a hydrometallurgical process where at the end niobium oxide and tantalum oxide are obtained. Reagents, water and energy consumption, in addition to emissions, effluents and product yields are assessed. Certain factors were identified as critical, and recirculation was encouraged in the model to maximize production and minimize reagents use and wastes. With this simulation, considering 3000 production hours per year, the metal output from the tailings of the old mine could cover around 1% and 7.4% of the world annual Nb and Ta demand, respectively.

The behaviour of the pseudo-protic ionic liquids TOAH+Cl- and TODAH+Cl- in the facilitated transport of indium(III) from HCl solutions is described. Metal transport is investigated as a function of different variables: hydrodynamic conditions, HCl concentration in the feed phase and indium and carrier concentrations. The experimental data are used to model both transport systems and to estimate diffusional parameters associated to them.

A winemaking waste was used as a precursor of activated carbon used in hazardous Cr(VI) removal from solutions. The preparation process consisted of a hydrothermal process, and a chemical activation, of the resulting product, with KOH. The adsorption results showed that the adsorption of Cr(VI) on the obtained activated carbon is strongly dependent on the stirring speed applied to the carbon/solution mixture, pH of the solution, and temperature. The equilibrium isotherm was well fitted to the Langmuir type-II equation, whereas the kinetic can be described by the pseudo-second-order kinetic model. Thermodynamic studies revealed that Cr(VI) adsorption was an exothermic and spontaneous process. Finally, desorption experiments showed that Cr(VI) was effectively desorbed using hydrazine sulfate solutions, and at the same time, the element was reduced to the less hazardous Cr(III) oxidation state.

Breakthrough curves for the adsorption of H2S using a metal-oxides mixture were predicted using the Bohart-Adams model of fixed bed adsorption. This mixture (ZnMn2O4+ZnO+Mn2O3) came from the processing of an urban waste as spent alkaline batteries were. The H2S adsorption experiments were carried out in a fixed-bed column at 20º C, and under various experimental conditions: gas flow rate, inlet H2S concentration and adsorbent dosage. Curves predicted by the model matched well with experimental data, providing data for the possible scale-up of the system. At the various experimental variables, the efficiency of the column, were also provided in the work. This investigation demonstrated the usefulness of a waste material, like spent alkaline batteries, to provide an adsorbent material to mitigate the problem of the presence of this harmful gas.

The behaviour of oxidized and non-oxidized multiwalled carbon nanotubes in the adsorption of lanthanum(III) from aqueous solutions is described. Metal uptake is studied as a function of several variables such as the stirring speed of the system, pH of the aqueous solution and metal and nanomaterial concentrations. The experimental results are fitted to various kinetics and isotherm models, being the rate law fitted to the film diffusion and particle diffusion models, when the non-oxidized and the oxidized nanomaterials are used to remove lanthanum from the solution, respectively. Sulphuric acid solutions seem to be appropriate to recover the metal from La-loaded nanomaterials.

A valorization process of spent coffee grounds (SCG) was studied. Thus, a two-stage process, a stage of extraction of the polyphenols and a stage of obtaining activated carbon (AC) by a carbonization process, was performed. The extraction was carried out with a hydro-alcoholic solution in a pressure reactor, modifying time and temperature. To optimize the extraction of polyphenols, a two-level factorial design with three replications at the central values was used. The best results were obtained by performing the extraction at 80 °C during 30 min, using a mixture of EtOH:H2O 1:1 (v/v) as extraction solution. Caffeine and chlorogenic acid were the most abundant compounds in the analyzed extracts, ranging from 0.09 to 4.8 mg∙g^-1 and 0.06 to 9.7 mg∙g^-1, respectively. The precursor obtained in the extraction stage were transformed into AC. An experimental design was realized in order to analyze the influence of different variables in the AC obtained process (reaction time and amount of potassium hydroxide used). Actived carbons with BET specific surface (SBET) comprised between 1600 m^2∙g^-1 and 2330 m²∙g^-1 had a microporous surface. Under the optimum conditions, the obtained AC presented a maximum adsorption capacity of methylene blue (qm) between 411 mg∙g^-1 and 813 mg∙g^-1.

Even in the first quarter of XXI century, the presence of organic dyes in wastewaters is a normal occurrence in a series of countries, and being these compounds toxics, their removal from these waters is of a necessity. Among the separation technologies, adsorption processing appeared as one of the most widely used to reach this goal. The present work reviewed the most recent approaches (first half of 2021 year) about the use of a variety of adsorbents on the removal of, also, a variety of organic dyes of different nature.

Mercury is a toxic metal, thus, it is an element which has more and more restrictions in its uses, but despite the above, the removal of this metal, from whatever the form in which it is encountered (zero valent metal, inorganic or organic compounds), and from different sources, is of a widespread interest. In the case of Hg(II), or Hg²⁺, the investigations about the treatment of Hg(II)-bearing liquid effluents (real or in most cases synthetic solutions) appear not to end, and from the various separation technologies, adsorption is the most popular among researchers. In this topic, and in the 2019 year, more than 100 publications had been devote to this field: Hg(II)-removal-adsorption. This work examined all of them.

On the system Au(III)-HCl-A324H⁺Cl^-, liquid-liquid extraction experiments were used to define the extraction equilibrium and the corresponding extraction constant, and the facilitated transport of this precious metal, from HCl solutions, across a flat-sheet supported liquid membrane was investigated, using the ionic liquid as carrier, as a function of hydrodynamic conditions, concentration of gold(III) (0.01-0.1 g/L), and HCl (0.5-6 M) in the feed phase, and carrier concentration (0.023-0.92 M) in the membrane. An uphill transport equation was derived considering aqueous feed boundary layer diffusion and membrane diffusion as controlling steps. The aqueous diffusional resistance (Δf) and the membrane diffusional resistance (Δm) were estimated from the proposed equation, being their values 241 s/cm an 9730 s/cm, respectively. The performance of the present carrier was compared against results yielded by other ionic liquids, and also it was investigated the influence that other metals had on gold(III) transport both from binary or quaternary solutions. Gold was finally recovered from receiving solutions as zero valent gold nanoparticles.

The transport of indium(III), from HCl solutions, across a supported liquid membrane in flat-sheet configuration was investigated, being the carrier the ionic liquid HA324H+Cl- (derived from the tertiary amine Hostarex A324 and hydrochloric acid). Different variables affecting the metal transport: hydrodynamic conditions in the source and receiving phases, metal and HCl concentrations in the source phase, and carrier concentration in the membrane phase, were investigated. Also the transport of indium(III) using carriers of various nature: ionic liquids, alcohol, ketone, phosphine oxide and phosphoric ester, was compared. The metal transport was modelled describing the transport mechanism as: diffusion across the source diffusion layer, a fast interfacial chemical reaction, and diffusion of the InCl4--carrier complex through the membrane support. Diffusional parameters for the transport of indium(III), from the experimental data and the model, were estimated.

The transport of indium(III), from HCl solutions, across a supported liquid membrane in flat-sheet configuration was investigated, being the carrier the ionic liquid HA324H⁺Cl^- (derived from the tertiary amine Hostarex A324 and hydrochloric acid). Different variables affecting the metal transport: hydrodynamic conditions in the source and receiving phases, metal and HCl concentrations in the source phase, and carrier concentration in the membrane phase, were investigated. Also the transport of indium(III) using carriers of various nature: ionic liquids, alcohol, ketone, phosphine oxide, etc., was compared. The metal transport was modelled describing the transport mechanism as: diffusion across the source diffusion layer, a fast interfacial chemical reaction, and diffusion of the InCl₄^--carrier complex through the membrane support. Diffusional parameters for the transport of indium(III), from the experimental data and the model, were estimated.

The present investigation deals with the adsorption of chromium(III) from alkaline media using multi-walled carbon nanotubes. The adsorption of Cr(III) has been studied under various experimental conditions: stirring speed of the aqueous solution, initial metal and adsorbent concentrations, NaOH concentration in the aqueous solution, and temperature. The rate law indicated that chromium adsorption is well represented by the particle diffusion model, whereas the adsorption process fits to the pseudo-second order kinetic model within an exothermic character. Equilibrium data fit to the Langmuir type-2 equilibrium isotherm in an spontaneous process. Chromium(III) can be eluted from metal-loaded nanotubes using acidic solutions, from which fine chromium(III) oxide pigment can be ultimately yielded.

The significant environmental issue of water pollution caused by emerging contaminants un-derscores the imperative for developing novel cleanup methods that are efficient, economically viable, and that are intended to operate at high capacity and under continuous flows at the in-dustrial scale. This study shows the results of the operational design to build a prototype for the retention at lab scale of pollutants residues in water by using as adsorbent material, insoluble polymers prepared by β-cyclodextrin and epichlorohydrin as a cross-linking agent. Laboratory in batch tests were run to find out the adsorbent performances against furosemide and hydro-chlorothiazide as pollutants model. The initial evaluation concerning the dosage of adsorbent, pH levels, agitation, and the concentration of pharmaceutical pollutants enabled us to identify the optimal conditions for conducting the subsequent experiments. The adsorption kinetic and the mechanisms involved were evaluated revealing that that the experimental data perfectly fit the pseudo second order model being the adsorption process mainly governed by chemisorption. According to the KF constants values of 0.044 (L/g) and 0.029 (L/g) for furosemide and hydro-chlorothiazide, respectively and determination coefficient (R2) higher than 0.9 for both com-pounds, Freundlich yielded the most favorable outcomes, suggesting that the adsorption process occurs on heterogeneous surfaces involving both chemisorption and physisorption processes. The maximum monolayer adsorption capacity (qmax) obtained by Langmuir isotherm reveal a saturation of the β-CDs-EPI polymer surface 1.45 times higher for furosemide (qmax = 1.282 mg/g) than hydrochlorothiazide (qmax = 0.844 mg/g). Based on these results, the sizing design and building of a lab scale model were conducted, which in turn will be used later to evaluate its performances working in continuous flow in a real scenario.

Spent batteries recycling is an important way to obtain low-cost graphite. Nevertheless, the obtaining of crystalline graphite with a rather low density of defects is required for many applications. In the present work, high-quality graphites have been obtained from different kinds of spent batteries. Black masses from spent alkaline batteries (batteries black masses, BBM), and lithium-ion batteries from smartphones (smartphone black masses, SBM) and electric and/or hybrid vehicles (lithium-ion black masses, LBM) were used as starting materials. A hydrometallurgical process was then used to obtain recycled graphites by acidic leaching. Different leaching conditions were used depending on the type of the initial black mass. The final solids were characterized by a wide set of complementary techniques.

This paper describes the physico-chemical study of the adsorption of dysprosium (Dy³⁺) in aqueous solution onto two types of activated carbons synthesized from spent coffee ground. KOH activated carbon is a microporous material with a specific BET surface area of 2330 m²·g^-1 and pores with a diameter of 3.2 nm. Carbon activated with water vapor and N₂ is a solid mesoporous, with pores of 5.7 nm in diameter and a specific surface of 982 m²·g^-1. A significant dependence of the adsorption capacity on the solution pH was found, while it does not depend significantly neither on the dysprosium concentration nor on the temperature. A maximum adsorption capacity of 31.26 mg·g^-1 and 33.52 mg·g^-1 for the chemically and physically activated carbons, respectively, were found. In both cases, the results obtained from adsorption isotherms and kinetic study were better fit to a Langmuir model and a pseudo-second-order kinetics. In addition, thermodynamic results indicate that dysprosium adsorption onto both activated carbons is an exothermic, spontaneous and favorable process.

Physical exercise is the greatest stress on the cardiovascular system, not only in humans but also in all vertebrates. Consequently, the cardiovascular response cannot be thought of as having only one "anthropocentric" interpretation. The modulation of cardiac output (Q) in response to exercise in the five major groups of vertebrates exhibits considerable variability. Moreover, the response of the heart rate (HR) and the stroke volume (SV), the fundamental factors that cause the rise in Q, is also highly variable. The difference in the range of HR is difficult to determine in many vertebrates, both at rest and at maximal effort. Additionally, the increase in SV varies among vertebrates. For example, while rainbow trout and leopards increase their SV by increasing end diastolic volume (EDV), humans do so at the expense of both increasing EDV and reducing end systolic volume (ESV). The variation in arterial pressure that arises during exercise varies notably among vertebrates, such as amphibians, whose blood pressure values do not increase as significantly as in mammals. Such differences in cardiovascular response among vertebrates may be linked to their habitat or living environment. This review aims to analyze the cardiovascular response of vertebrates to physical exercise as the most common stressor.

Pinus patula is one of the most planted wood conifer species worldwide; however, no foliar nutrient standards exist for this species up to date. The objective of the present study was to generate and verify two sets of foliar nutrient standards for nearly ten-year-old P. patula trees: critical nutrient concentrations and DRIS norms. Nutrients studied were N, P, K, Ca, Mg, Fe, Cu, Zn, Mn, and B. The reference standards were verified experimentally by installing two fertilization trials; one of them located in Huayacocotla, state of Veracruz and the other one in Aquixtla, state of Puebla, Mexico. Nutrient status of each fertilization trial was correctly predicted by critical nutrient values and DRIS as well. Both standards were able to detect the secondary growth-limiting nutrient deficiency in the Huayacocotla trial, where the primary limitation for growth was scarcity of solar radiation within tree crowns. The limiting nutrient in both experimental trials was K.

Since the 1960s Rare earths (REs) applications gradually have expanded to everyday life. REs have great strategic importance in industrial and technological development, so it is expected an increase in their demand. Among the REs the European Commission considered Cerium and Lanthanum as critical raw materials. This research article studies the adsorption of Ce and La onto two carbon nanomaterials, multiwalled carbon nanotubes (MWCNT) and carboxylic functionalized multiwalled carbon nanotubes (MWCNT_ox). The latter has slightly more affinity for REs than MWCNT. The recovery percentage for Ce were 89 and 98% and in the case of for La were 99 and 92% using 0.8 g of MWCNT and 0.2 g of MWCNT_ox respectively. The adsorption process fits a pseudo second-order kinetic model and the Langmuir isotherm best represented the metal uptake.

By the use of the tertiary amine A327 and 1 M HCl solution as precursors, the ionic liquid A327H+Cl- was generated and used to investigate its performance in the transport of Au(III) form hydrochloric acid medium. The influence of the stirring speed (600-1800 min-1), ionic liquid concentration (1.25-50% v/v) in the membrane phase and gold concentration (0.01-0.15 g/L) in the feed phase on metal transport have been investigated. An equation which included both equilibrium and kinetics parameters was derived, and the membrane diffusional resistance (Δm) and feed phase diffusional resistance (Δf) was estimated as 9.5x106 s/cm and 307 s/cm, respectively. At carrier concentrations in the 5-50% v/v range and gold concentrations in the 0.01-0.15 g/L range, metal transport is controlled by diffusion of metal species through the feed boundary layer, whereas at the lowest carrier concentrations, membrane diffusion is predominant. From the receiving solutions, gold can be recovered as gold nanoparticles.

In this work, a deep characterization of the properties of K6Ta10.8O30 microrods has been performed. The starting material used to grow the microrods has been recovered from mining tailings coming from the Penouta Sn-Ta-Nb deposit, located in the north of Spain. The recovered material has been submitted to a thermal treatment to grow the microrods. Then, they have been characterized by scanning electron microscopy, X-ray diffraction, micro-Raman and micro-photoluminescence. The results of our study confirm that the K6Ta10.8O30 microrods have a tetragonal tungsten bronze-like crystal structure, which can be useful for ion-batteries and photocatalysis.

Background: The Victorian era in Great Britain was a historical period that brought about profound changes for humanity. The confluence of various factors fostered the development of numerous scientific disciplines. In the field of health sciences, Florence Nightingale played a central role. Following her training as a nurse and her role as superintendent during the Crimean War, she made decisive contributions to establishing a public health network. Methods: This is a retrospective historical heuristic and hermeneutic study analyzing documentation of Nightingale's contributions to public health from around 1890 to 1900. The historical method was used to collect, classify, and analyze primary and secondary sources relevant to the study's objectives. Results: Nightingale supported the development of the concept of “health at home” by training women to implement healthy measures that contributed to the well-being of families and communities. Through the training and development of a formal “Health Missioners program”, she provided the necessary guidance to improve the health of rural communities across the English countryside. Conclusion: The role of Health Missioners has persisted, as health visitors continue to visit homes in the United Kingdom. Therefore, the contribution of Florence Nightingale to public health is unquestionable. This study was not registered.

Biopolymers based on plant and animal proteins are interesting alternatives in the development of films with future prospects as food packaging. Considering that in recent years there has been an increasing interest in the valorization of agro-industrial residues and by-products and that the blending of polymers can lead to materials with improved properties, in this work, keratin-rich feather fibers and gliadins were blended at different ratios in order to develop sustainable and biodegradable films. Control gliadin G100, feather F100 films and their blends at 3:1 (G75F25) , 2:2 (G50F50) and 1:3 (G25F75) ratios were successfully developed through thermoprocessing. The physical properties were differentiated as a function of the concentration of both polymeric matrices. Although gliadins showed higher hydrophilicity confirmed by its highest swelling degree, films with high gliadin ratios exhibited lower water permeability values at low and medium relative humidities. On the other hand, the feathers displayed the highest Young´s modulus values and provided oxygen barrier to the blends, principally at the highest relative humidity. In conclusion, the blend of these protein-based polymers at different ratio resulted on interesting composites whose physical properties could be adjusted.

Biogenic-Silver nanoparticles emerge as new nanosilver platfmorm that allow to obtain silver nanoparticles via “green chemistry”. In our study we obtained biogenic-Silver nanoparticles from Iris tuberosa leaves extract. Nanoparticles were characterized by UV-vis spectroscopy, dinnamical light scattering technique and Transmission electron microscope, showing spheric and irregular nanoparticles with 5 to 50 nm in diameter. Antioxidant and antimicrobial properties were evaluated against typical microbial contaminants found in cosmetic products, showing high antioxidant and antimicrobial properties. We formulated a natural moisturizing cream with biogenic-silver nanoparticles to evaluate the preservative efficiency trought challenge test, confirming that our nanoparticles are a promising alternative to use as cosmetic preservative.

An activated carbon manufacturing process using winemaking waste is analyzed and designed at industrial scale. Starting from experimental research, the chemical transformations and thermodynamics during pruning wood conversion are studied as a basis for plant design. In this way, mass and energy balances of hydrothermal carbonization and physical activation are fulfilled and a thermoeconomic methodology is applied to develop an energy-integrated plant. To achieve this target, a network of heat exchangers is allocated to minimize heat consumption and supply hot domestic water, while a cogeneration cycle is designed to provide electricity and satisfy the remaining heat demand. Furthermore, a sensitivity analysis is carried out to determine the influence of the production scale and other operation parameters, such as annual workload, service life, and capital and feedstock costs, on the economic viability of the plant. The energy balance of the plant indicates that the energy integration design manages to provide 48.9% of the overall process energy demand by crossing hot and cold streams and recovering heat from residual flue gas. On the other hand, the exergy cost analysis identifies the combustion of pruning wood used to provide heat demands as the main source of exergy destruction, confirming the suitability of integration to improve the thermodynamic performance. Including activated carbon production, electricity, and hot domestic water, the exergy efficiency of the plant stands at 11.5%.

This article presents the copper ions adsorption process using an activated carbon from winemaking wastes. The pH, temperature, activated carbon amount and initial copper concentration were varied based on a full factorial 2^k experimental design. Kinetic and thermodynamic studies were also carried out. The adsorption kinetics was found follow a pseudo-second-order model. The adsorption data fit better to the Langmuir isotherm. The ANOVA demonstrated that both pH of the solution and activated carbon dosage had the greatest influence on copper adsorption. The activation energy was -32 kJ·mol^-1 suggesting that the copper adsorption is a physic-sorption process. The best fit to a linear correlation was the moving boundary equation that controls the kinetics for the adsorption copper ions onto the activated carbon. The X-ray photoelectron spectroscopy (XPS) results reveal the existence of different copper species (Cu²⁺, Cu⁺ and or Cu⁰) on the surface of the carbonaceous adsorbent after the adsorption, which could suggest a simultaneous reduction process.

When a low-salience stimulus of any type of sensory modality—auditory, visual, tactile—shortly precedes an unexpected startle-like stimulus, such as the acoustic startle reflex, the startle motor reaction becomes less pronounced or is even abolished. This phenomenon is known as prepulse inhibition (PPI), and it provides operational measures of information processing by filtering out irrelevant stimuli. Because PPI implies plasticity of a reflex and is related to automatic or attentional processes, depending on the interstimulus intervals, this behavioral paradigm might be considered a potential marker of short- and long-term plasticity. Assessment of PPI is directly related to the examination of neural sensorimotor gating mechanisms, which are plastic adaptive operations for preventing overstimulation and help the brain focus on a specific stimulus among other distracters. Despite their obvious importance in normal brain activity, little is known about the intimate physiology, circuitry, and neurochemistry of sensorimotor gating mechanisms. In this work, we extensively review the current literature focusing on studies that used state-of-the-art techniques to interrogate the neuroanatomy, connectomics, neurotransmitter-receptor functions, and sex-derived differences in the PPI process, and how we can harness it as biological marker in neurological and psychiatric pathology.

Climacteric fruits undergo a characteristic ripening process regulated by ethylene, a key plant hormone. Extending the shelf life of these fruits while preserving their postharvest quality poses a significant challenge for the food industry. This review provides a comprehensive overview of physiological and molecular strategies to delay ethylene-mediated ripening in climacteric fruits and their impact on shelf life, postharvest quality, sensory attributes, and volatile compounds. Additionally, it examines the role of ethylene in fruit ripening analysing various ethylene managing strategies including ethylene inhibitors, ethylene adsorbents and ethylene scavengers by catalytic oxidation The review concludes with future research directions including integrated strategies, environmental considerations and commercial applications for improving postharvest handling and fruit quality.

Preparation of a low-cost cellulose-based bioadsorbent from the cellulosic material extracted from the rose stems (CRS) was carried out; rose stems were considered agricultural wastes. After the required pretreatment of this waste, and its further treatment with an acidic mixture of acetic and nitric acids, the CRS product was yielded. The resulting bioadsorbent was characterized by several techniques, such as X-ray diffraction, which revealed diffraction maxima related to cellulose structure, whose calculated crystallinity index (CrI) was 75 %. In addition, Fourier Transform Infrared spectroscopy (FTIR), 13C Nuclear Magnetic Resonance (NMR), and X-ray Photoelectron Spectroscopy (XPS) showed signs of acetylation of the sample, also, the thermal properties of the solid was evaluated through Thermogravimetric Analysis (TGA). Scanning Electron Microscopy (SEM) showed cellulose fibers before and after the adsorption process, some particles with not regular shapes were also observed. The CRS bioadsorbent was used in the effective adsorption of valuable Tb(III) from aqueous solution. The adsorption data resulted in a better fit to the Freundlich isotherm, and pseudo-second-order kinetic models; however, chemisorption had not been ruled out. Finally, desorption experiments revealed a recovery of terbium ions with an efficiency of 97 % from terbium-loaded bioadsorbent.

Nowadays, mindfulness-based interventions (MBI) have experimented a remarkable development of studies among childhood and adolescent interventions. For this reason, dispositional mindfulness (DM) measures for children and adolescents have been developed to determine the effectiveness of MBI at this age stage. However, little is known about how key elements of DM (f. e., cognitive de/fusion or experiential avoidance that both conform psychological inflexibility) are involved in the mechanisms of the children and adolescents’ mental health outcomes. This research examined the mediating effect of cognitive fusion between DM and anxiety and other negative emotional states in a sample of 318 Spanish primary-school students (aged between 8 and 16 years, M=11.24, SD=2.19, 50.8% males). Participants completed the AFQ-Y, which is a measure of psychological inflexibility that encompasses cognitive defusion and experiential avoidance; CAMM (DM for children and adolescents), PANAS-N (positive and negative affect measure for children, the Spanish version of PANASC), and STAIC (an anxiety measure for children). The study accomplished ethical standards. As MBI relevant literature has suggested, cognitive defusion was a significant mediator between DM and symptoms of both negative emotions and anxiety in children and adolescents. However, experiential avoidance did not show any significant mediating relationship. Probably, it is needed improvement of the assessment of experiential avoidance. MBI programs for children and adolescents may include more activities for reducing the effects of the cognitive defusion on their emotional distress.

Several empirical studies indicate that the lack of financing is one of the main barriers that affects the economic growth of small and medium enterprises (SMEs). The main objective of this investigation was to determine to what extent the economic sector; enterprise size; the characteristics inherent to the enterprise; legal status; the variables linked to the performance of the enterprise; and the attributes of the owner influence the access to bank financing of SMEs in Mexico. Using a discrete response probit regression model, the impact of enterprises characteristics on the probability of obtaining a bank loan was determined. The data collected is from the Enterprise Surveys of Mexico, carried out by the World Bank. The sample of 1,480 enterprises is representative by enterprise size, by economic sector, and by region. The research has a quantitative approach with a correlational scope and a non-experimental and transectional design. One of the main results highlights that the determinants with the greatest influence on access to bank financing are: age, the small size, foreign participation, and the manufacturing sector. These results are consistent with other empirical studies, as well as with the pecking order theory and the financial life cycle theory.

As a hazardous waste, pickling waste liquor must be properly treated. An alternative consists in promoting the formation of ferrous salts from this residue, due to its higher ferrous content. Since FeCl2·4H2O is widely used in several applications, obtaining pure crystals of this material appears to be an interesting prospect. However, this compound has scarcely been investigated. In the present work, FeCl2·4H2O crystals have been obtained from pickling waste liquors. Their structural and morphological characteristics have been investigated by X-ray diffraction, scanning electron microscopy as well as Mössbauer spectroscopy. In addition, the photoluminescence study of the obtained samples was also assessed. It was observed that after some aging time, the obtained crystals change in colour from green to more yellowish. So, the aged sample has also been evaluated, and their structural characteristics are compared with the original crystals. Despite this, the obtained crystals exhibit a FeCl2·4H2O structure, which is not modified with the aging of the sample.

Surface modification of polypropylene (PP) films is achieved using gamma-irradiation-induced grafting to proffer with antimicrobial activity. The copolymer was obtained through a versatile two-step route; pristine PP is exposed to gamma rays and grafted using methyl methacrylate (MMA), then N-vinylimidazole (NVI) is grafted onto the copolymer PP-g-MMA by simultaneous irradiation. The characterization included Fourier-Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Thermogravimetric Analysis (TGA), X-ray Photoelectron Spectroscopy (XPS), and physicochemical analysis of swelling and contact angle. The copolymer (PP-g-MMA)-g-NVI was loaded with vancomycin, and the drug released was quantified by UV-vis spectrophotometry at different pH. The surface of (PP-g-MMA)-g-NVI exhibited pH-responsiveness and moderate hydrophilicity, suitable properties for controlled drug release.

The tourism sector in general and the hotelier in particular face the challenge of managing appropriate measures to deal with the covid-19 pandemic. In this sense it is useful to know what the measures are most demanded by the clientele. This research, by analyzing the variance (ANOVA) of a factor concluded that women are more demanding than men in terms of the level of demand in relation to the measures to be taken in hotels. This, as a practical application, allows to know more accurately the expectations, demands and demands of the client segmented by sex, in order to satisfy and improve the tourist experiences.

The tourism sector in general and the hotelier in particular face the challenge of managing appropriate measures to deal with the covid-19 pandemic. In this sense it is useful to know what the measures are most demanded by the clientele. This research, by analyzing the variance (ANOVA) of a factor concluded that women are more demanding than men in terms of the level of demand in relation to the measures to be taken in hotels. This, as a practical application, allows to know more accurately the expectations, demands and demands of the client segmented by sex, in order to satisfy and improve the tourist experiences.

The tourism sector in general and the hotelier in particular face the challenge of managing appropriate measures to deal with the covid-19 pandemic. In this sense it is useful to know what the measures are most demanded by the clientele. This research, by analyzing the variance (ANOVA) of a factor concluded that women are more demanding than men in terms of the level of demand in relation to the measures to be taken in hotels. This, as a practical application, allows to know more accurately the expectations, demands and demands of the client segmented by sex, in order to satisfy and improve the tourist experiences.

The abundant use of lithium-ion batteries (LIBs) in a wide variety of electric devices and vehicles will generate a large number of depleted batteries, which contain several valuable metals such as Li, Co, Mn, and Ni present in the structure of the cathode material (LiMO2). The present work investigates chemical, technological, and environmental aspects in the treatment of such wastes, development of a methodology for the extraction of lithium, cobalt, nickel, manganese, and graphite by a carbochlorination pyrometallurgical process. Mixtures of cathode and anode materials (called black mass, mixed oxides of Li, Co, Ni, Mn, and graphite) from different LIBs, carbon black (as reducing agent), and CaCl2 (as chlorinating agent) were used. Non-isothermal thermogravimetric tests up to 850°C and isothermal tests at 700°C of the mixtures in an inert atmosphere were carried out. It was experimentally observed that the LiMO2-C-CaCl2 reaction takes place at 700°C. LiCl, Ni, and Co were obtained as final products, and to a lesser extent, CoO, NiO, and MnO2. CaCO3 was also obtained as a by-product. The obtained results show that carbochlorination is an efficient and effective alternative route for the extraction and recovery of metals from different LIBs, focused on the sustainability and circular economy

Autism Spectrum Disorder (ASD) is a complex neurodevelopmental disorder characterised by poor social interaction and communication, as well as restricted and stereotyped interests. Due of the high prevalence of gastrointestinal disorders in individuals with ASD, researchers have investigated the gut microbiota as a potential contributor to its aetiology. The relationship between the microbiome, gut, and brain (microbiome-gut-brain axis) has been acknowledged as a key factor in modulating brain function and social behaviour, but its connection to the aetiology of ASD is not well understood. Recently, there has been increasing attention on the relationship between the immune system, gastrointestinal disorders, and neurological issues in ASD, particularly in relation to the loss of specific species or a decrease in microbial diversity. It focuses on how gut microbiota dysbiosis can affect gut permeability, immune function, and microbiota metabolites in ASD. Although a very complete study suggests that dysbiosis is a consequence of the disease and that it has practically no effect on autistic manifestations. This is a review of the relationship between the immune system, microbial diversity, and the microbiome-gut-brain axis in the development of autistic symptoms severity and, a proposal of a novel role of gut microbiome in ASD, where dysbiosis is a consequence of ASD-related behaviour and where dysbiosis in turn accentuates the autistic manifestations of the patients via microbiome-gut-brain axis in a feedback circuit.

Objectives: COVID-19 pandemic interrupted the Spanish professional football competition until May 2020, when it was restarted following a surveillance protocol established by LaLiga. The aims were to describe the infective and serological status of professional football players (PLY) and staff (STF) between May 5th 2020 until April 22nd 2021, to analyze the spatial-temporal distribution of the COVID-19 disease in this cohort and its comparison to the Spanish population. Methods: a prospective observational cohort study was carried out. Differences between PLY and STF were assessed by Chi-squared test and test of equality of proportions. Pearson correlation test was used to measure the presence of an association between the percentages of positivity in population and LaLiga cohort. Results: 137,420 RT-PCR and 20,376 IgG serology tests were performed in 7,112 professionals. Positive baseline serology was detected in 10.57% of PLY and 6.38% of STF. Among those who started the follow-up as not infected and before STF vaccination, 11.87% of PLY and 5.03% of STF became positive. Before summer 2020 the prevalence of infection was similar than the observed at national level. The percentage of positivity in the Spanish population was higher than in LaLiga cohort, but both series showed a similar decreasing trend.

Natural killer (NK) cells play a crucial role in innate immunity, particularly in combating infections and tumors. However, in hematological cancers, NK cells often exhibit impaired functions. Therefore, it is very important to activate its endosomal toll-like receptors (TLRs) as a potential strategy to restore its antitumor activity. We stimulate NK cells from the peripheral blood mononuclear cells from children with acute lymphoblastic leukemia and NK cells isolated, the NK cells were stimulated with specific TLR ligands (Poly I:C, Imiquimod, R848, and ODN2006) and evaluated changes in IFN-γ, CD107a, NKG2D, NKp44 expression, Granzyme B secretion, cytokine/chemokine release, and cytotoxic activity. Results revealed that Poly I:C and Imiquimod enhanced activation of both immunoregulatory and cytotoxic NK cells, increasing IFN-γ, CD107a, NKG2D, and NKp44 expression. R848 activated immunoregulatory NK cells, while ODN2006 boosted CD107a, NKp44, NKG2D, and IFN-γ secretion in cytotoxic NK cells. R848 also increased secretion of various cytokines/chemokines. Importantly, R848 and ODN 2006 significantly improved cytotoxicity against leukemic cells. Overall, TLR stimulation enhances NK cell activation, suggesting TLR8 (R848) and TLR9 (ODN 2006) ligands as promising candidates for antitumor immunotherapy.

This paper shows the development of a simultaneous tri-band (S: 2.2 - 2.7 GHz, X: 7.5 - 9 GHz and Ka: 28 - 33 GHz) low-noise cryogenic receiver for geodetic Very Long Baseline Interferometry (geo-VLBI) which has been developed by the technical staff of Yebes Observatory (IGN) laboratories in Spain. The receiver was installed in the first radio telescope of the Red Atlántica de Estaciones Geodinámicas y Espaciales (RAEGE) project, which is located in Yebes Observatory, in the frame of the VLBI Global Observing System (VGOS). After this, the receiver was borrowed by the Norwegian Mapping Autorithy (NMA) for the commissioning of two VGOS radiotelescopes in Svalbard (Norway). A second identical receiver was built for the Ishioka VGOS station of the Geospatial Information Authority (GSI) of Japan, and a third one for the second RAEGE VGOS station, located in Santa María (Açores Archipelago, Portugal). The average receiver noise temperatures are 21, 23 and 25 Kelvin and the measured antenna efficiencies are 70%, 75% and 60% in S-band, X-band and Ka-band, respectively.

Commercially available oxidized (carboxylic groups) and non-oxidized multiwalled carbon nanotubes were studied as adsorbents of cerium(III) in batch operation mode. Several variables affecting the rare earth adsorption were investigated, including: the stirring speed applied to the system, the pH of the solution and the metal concentration and carbon dosages. Although the removal of cerium from the solution is different and dependent upon the adsorbent type: i) adsorption in non-oxidized multiwalled carbon nanotubes, ii) cation exchange in the case of using oxidized multiwalled carbon nanotubes, the adsorption kinetics, the rate law and the isotherm models are the same for both adsorbents: pseudo-second order, film diffusion and Langmuir Type-1, respectively. Cerium is desorbed from loaded adsorbents using acidic solutions.

Background: The aim was to diagnose Candida in the oral cavity of subjects with type 2 diabetes mellitus (T2DM) using a genotyping technique and to compare the results with those from con-ventional diagnosis by Papanicolau (Pap) staining. Methods: Palatal mucosa smears were per-formed in 18 dental care patients diagnosed with T2DM and grade I, II, and III prosthetic stomatitis who met the inclusion criteria; 18 healthy control subjects were also included in the study. He-moglobin A1c (HbA1c) levels were determined from total blood. Using exfoliative cytology, the Pap staining technique was used to diagnose candidiasis. Exfoliative cytology was also used for molecular diagnosis; DNA was obtained for Candida genotyping and RNA was used for gene ex-pression studies. Results: Clinical patterns indicated that all subjects were positive for Candida; however, Pap analysis revealed only three positive subjects, whereas end-point polymerase chain reaction (PCR) analysis revealed fifteen subjects with some type of Candida. The most common Candida species found were Candida guilliermondii (38.8%), Candida krusei (33.3%), Candida tropicalis, and Candida lusitaniae (22.2%). Interestingly, the coexpression of different species of Candida was found in various patients. In all patients, HbA1c levels were increased. Gene expression analysis showed a significant decrease (p ≤ 0.05) in TLR2 expression in positive subjects, whereas TLR4 expression did not differ significantly among patients. Conclusions: The end-point PCR technique showed better sensitivity for diagnosis of Candida when compared with diagnosis by Pap staining. T2DM subjects showed an increased presence of C. guilliermondii that was correlated with decreased TLR2 expression

The aim is to understand the relationship between psychological inflexibility, emotional eating, and the rate of healthy eating. A total of 705 Spanish adults participated (65.2% women); the mean age was 27.21 years (SD = 10.67). The instruments used were Acceptance and Action Ques-tionnaire, Eating and Appraisal Due to Emotions and Stress Questionnaire and the Healthy Eating Index for the Spanish population. The women showed significantly higher scores in psychological inflexibility than men (p < .001). No differences have been described in the Emotional Eating scale (p = .085) differences have been reported on the Self-efficacy in Emotion -and Stress-Related Eating subscale, where men do better at managing eating (p < .001). Females indicate better diet quality (p < .001). Those who show less psychological inflexibility obtain emotional eating scores indicative of less coping with emotions through food (p < .001). Groups formed according to psychological inflexibility do not differ in diet quality (p = .898). The importance of psychological inflexibility is due to its role and strong association with a variety of problems related to eating behavior, but especially because it is a construct that can be intervened upon and modified.

Beta-lactam resistant bacteria, commonly resident in tertiary hospitals, have emerged as a worldwide health problem because of ready-to-eat vegetable intake. We aimed to characterize the genes providing resistance to beta-lactam antibiotics in Enterobacteriaceae, isolated from five commercial salad brands for human consumption in Mexico City. 25 samples were collected, grow in blood agar plates, the bacteria were biochemistry identified and antimicrobial susceptibility testing was done, the carried family genes were identified by endpoint PCR and the specific genes were confirmed with WGS by NGS. 12 positive cultures were identified and their microbiological distribution was as follows, 8.3% for Enterobacter aerogene (n=1), 8.3% for Serratia fonricola (n=1), 16.7% for Serratia marcesens (n=2), 16.7% for Klebsiella pneumoniae (n=2), and 50% (n=6) for Enterobacter cloacae. The endpoint PCR results showed 11 colonies positive for blaBIL (91.7%), 11 for blaSHV (91.7%), 11 for blaCTX (97.7%), 12 for blaDHA (100%),4 for blaVIM (33.3%), 2 for blaOXA (16.7%), 2 for blaIMP (16.7%), 1 for blaKPC (8.3%) and 1 for blaTEM (8.3%) gene, all samples were negative blaROB, blaCMY, blaP, blaCFX and blaLAP gene. The sequencing analysis revels a specific genotypes for Enterobacter cloacae (blaSHV-12, blaCTX-M-15, blaDHA-1, blaKPC-2); Serratia marcescens (blaSHV-1, blaCTX-M-3, blaDHA-1, blaVIM-2); Klebsiella pneumoniae (blaSHV-12, blaCTX-M-15, blaDHA-1); Serratia fonticola (blaSHV-12, blaVIM-1, blaDHA-1) and Enterobacter aerogene (blaSHV-1, blaCTX-M-1, blaDHA-1, blaVIM-2, blaOXA-9). Our results indicate that beta-lactam resistant bacteria have acquired integrons with a different number of genes that providing panresistance to beta-lactam antibiotics, including penicillins, oxacillins, cefalosporins, monobactams, carbapenems and imipenems.

This study presents a novel method based in ray tracing for analyzing wave propagation in composites, specifically tailored for Structural Health Monitoring applications. The method offers distinct advantages over the commonly used Finite Element Method mainly in computational resource utilization, that has become a limiting factor for this kind of analyses. The ray tracing method is evaluated against a number of example cases representing structural details such as thickness changes, stringers or simulated damages and it highlights the significance of ray tracing to study wave propagation under these conditions and how it can serve as a valuable tool for structural health monitoring.

Agriculture in Morocco has been extensive until the middle of the 20th century due to the distribution of rainfall and the availability of water. In the middle of the last century hydraulic works were built that allowed the transition to intensive agriculture by the increase of irrigated areas, allowing that in the territories where there is water for irrigation and the climate allows it, the crops adapt to the demands of the market. The objective of the study is to assess by satellite images the land cover between 1985 and 2020, analyzing the changes in cultivation areas, as well as the changes in desert, sub-desert and forest areas of the Oum Er Rbia hydrological basin in Morocco. Landsat satellite images have been used since 1984 by the US government (Aerospace and Geological Agencies). A series of vegetation indices (NDVI, RVI, TNDVI and EVI) have been used; among which TNDVI (Transformed Normalized Vegetation Index) stands out for its better accuracy, which has allowed us to distinguish vegetation in cultivated and forest areas, as well as arid zones. In addition, the study has compared the use of two methodologies to calculate changes in the coverage of the Earth’s surface, has used local image processing from the Sentinel Application Platform tool and has also used the Google Earth Engine tool. The latter being the most optimal, although at the moment it has great limitations. In both methodologies and in the different indices it has been possible to observe during these 35 years as the cultivated area has increased (related to the availability of water by the construction of reservoirs and canals), how plant cover has improved in forest areas, and a range of variations in arid areas.

Industry 4.0 is in continuous technological growth that benefits all sectors of industry and society in general. This article reviews the concept of Digital Twin (DT) and the interest of its application in photovoltaic installations. A comparison is made on how other authors use the DT approach in photovoltaic installations to improve the efficiency of the renewable energy generated and consumed, the energy prediction and the reduction of the operation and maintenance costs of the photovoltaic installation. It is reviewed how, by providing real-time data and analysis, DTs enable more informed decisions in the solar energy sector. The objectives of the review are to study the digital twin technology and to analyze its application and implementation in photovoltaic systems.

Ampelography, the botanical discipline dedicated to the identification and classification of grapevine cultivars, was grounded on the description of morphological characters and more recently is based on the application of DNA polymorphisms. New methods of image analysis may help to optimize morphological approaches in ampelography. The objective of this study was the classification of representative cultivars of Vitis vinifera conserved in the Spanish collection of IMIDRA according to seed shape. Thirty eight cultivars representing the diversity of this collection were analyzed. A consensus seed silhouette was defined for each cultivar representing the geometric figure that better adjusted to their seed shape. All the cultivars tested were classified in ten morphological groups, each corresponding to a new model. The models are geometric figures defined by equations and similarity to each model is evaluated by quantification of percent of the area shared by the two figures, the seed and the model (J index). The comparison of seed images with geometric models is a rapid and convenient method to classify cultivars. A large proportion of the collection may be classified according to the new models described and the method permits to find new models according to seed shape in other cultivars.

Local Productive Systems (hereinafter LPS) based on agro-food industries constitute alternative models of development in peripheral rural areas that are subject to internal and external dynamics and processes. The main objective of the research is to investigate the processes and their consequences on four SPLs based on the Iberian Pig Transformation Industry (hereinafter LPS-IPTI) in SW Spain: Fregenal de la Sierra, Higuera la Real, Cumbres Mayores and Jabugo. Using secondary data, a comparison is made between 2002 and 2020 to establish the changes, causes and consequences on the LPS-IPTI studied. The results obtained indicate (1) business and territorial concentration of LPS-IPTI; (2) productive and territorial specialisation in standardised products and quality products; (3) simplification of industrial processes; (4) loss of employment, especially female; (5) external control of companies in the sector which, accordingly, results in the loss of prominence of local actors in favour of foreign companies, reduced social capital and the progressive loss of ownership of the LPS.

Wind is one of the factors that has a great influence on suspended matter in lakes, especially in shallow lagoons. In order to know how wind affects the water in Albufera of Valencia, a shallow coastal lagoon, the measured variables of turbidity and transparency have been correlated with the estimates by processing Sentinel-2 satellite images with the Sen2Cor processor. Data from four years of study show that most of them are light to gentle easterly breezes and moderate to fresh westerly breezes. The results obtained show significant correlations between the measured variables and those obtained from the satellite images for total suspended matter and water transparency and with the average daily wind speed. There is no significant correlation between wind and chlorophyll a. Moderate to fresh breezes resuspend the fine sediment reaching concentration values from 100 to 300 mg L-1 according to satellite data. However, it is necessary to obtain field data for the values of moderate and fresh winds, as for now there are no experimental data to verify the validity of the satellite estimates.

The aims of this paper are twofold. First, it is shown, for the first time, which types of nonsmooth functions are characterized by all vector critical points as being efficient or weakly efficient solutions of vector optimization problems in constrained and unconstrained scenarios on Hadamard manifolds. This implies the need to extend different concepts, such as the Karush--Kuhn--Tucker vector critical points and generalized invexity functions, to Hadamard manifolds. The relationships between these quantities are clarified through a great number of explanatory examples. Second, we present an economic application proving that Nash's critical and equilibrium points coincide in the case of invex payoff functions.

This paper presents the design and implementation of a remote supervision and control system for a gunpowder drum filling plant. The use of technologies such as SCADA (Ignition), IoT (Node-RED), ERP (Odoo) and digital twins (Factory I/O) to achieve remote monitoring and operation of the plant is described. The solution allows full control of the production process from any location through customized graphical interfaces. The challenges encountered in integrating multiple systems and platforms are discussed, along with the security measures implemented within the Azure cloud environment. The results demonstrate the effectiveness of 4.0 technologies in automating and digitizing critical industrial processes. This research will lay the groundwork for the adoption of these approaches in companies seeking greater efficiency, traceability and safety in their operations. The experience gained allows us to successfully face the digital transformation in modern manufacturing.

The ongoing COVID-19 pandemic is one of the biggest health and societal challenges of the recent decades. Among the causes of mortality triggered by SARS-CoV-2 infection, the presence of an inflammatory "cytokine storm" (CS) at later stages of the disease has been found to play a determinant role. Here, we used available transcriptomic data from the bronchoalveolar lavage fluid (BALF) of COVID-19 patients suffering from a CS to obtain gene-signatures associated to this pathological process. Using these signatures, we interrogated the Connectivity MAP (CMap) dataset that contains the effects of over 5,000 small molecules on the transcriptome of human cancer cell lines, and looked for molecules which effects on transcription mimic or oppose those associated to the CS. Consistent with their medical use, this analysis found a significant enrichment of glucocorticoids or inhibitors of the Janus Kinases (JAK) as drugs that could revert the CS. On the other hand, molecules that potentiate the immune response such as PKC activators are predicted to worsen the CS. Besides these expected findings, our analysis also reveals a potential effect of the antibiotic doxycycline or MAPK/RAF/MEK inhibitors in reverting the CS, or of topoisomerase inhibitors and the anti-alcohol abuse drug disulfiram in potentiating its effects. Finally, our analyses support that the gender-related differences in the severity of COVID-19 are related to the anti-inflammatory properties of female hormones. While acknowledging that this is an analysis based on limited available data, we decided to share it as a resource that might help others in the selection of drugs that could be tested in the context of experimental models of CS triggered by viral infections.

An laboratory procedure has been developed to obtain lanthanum oxide from spent fluid catalytic cracking catalyst, commonly used in the cracking the heavy crude oil process. Two different spent fluid catalytic cracking catalysts, which are mainly formed by silica and alumina, and a certain amount of rare earths were leached under several conditions to recover the rare earth from the solids waste. Subsequently, liquid phases were subjected to a liquid-liquid extraction process, and lanthanum was quantitatively stripped using oxalic acid to obtain the corresponding lanthanum oxalates. After the corresponding thermal treatment, these solids were transformed into lanthanum oxide. Both, lanthanum oxalates and oxides solids have been characterized by wide techniques in order to investigate the purity of the phases.

Abstract: Chemical burns are one of the most dangerous and aggressive types of burns as they can cause significant tissue damage, leading to pain, inflammation, necrosis, and scarring. We present a burn case report associated with the use of Acellular Dermal Matrix (MatriDerm® MedSkin Solution Dr. Suwelack AG, Billerbeck, Germany) for the reconstruction of a Hallux after the patient was mistakenly administered intramuscular Nitric Acid at another institution. The patient presented with a third degree burn that compromised the medial aspect of the hallux’s skin, the distal phalanx and nail bed. Early debridement was performed, and Negative Pressure Wound Therapy (NPWT VAC, 3M, US) was used to preserve and promote tissue viability. Eight days later, the patient was taken to the OR, and Acellular Dermal Matrix and split-thickness skin graft were used to reconstruct her right hallux’s defect. The patient achieved adequate clinical evolution and was discharged with complete reconstruction of the burned area. Acellular Dermal Matrix proved to be an important and viable option for reconstructive surgery after a chemical burn, and further studies are warranted to ensure its routine usage in this kind of lesions. Keywords: chemical burn, acellular matrix, hallux reconstruction, NPWT

This paper presents a study and implementation of a convolutional neural network to identify and recognize humpback whale specimens from the unique patterns of their tails. Starting from a dataset composed of images of whale tails, all the phases of the process of creation and training of a neural network are detailed – from the analysis and pre-processing of images to the elaboration of predictions, using TensorFlow and Keras frameworks. Other possible alternatives are also explained when it comes to tackling this problem and the complications that have arisen during the process of developing this paper.

Configuration techniques have been used in several fields, such as the design of business process models. Sometimes these models depend on the data dependencies, being easier to describe "what" has to be done instead of "how". Configuration models enable to use a declarative representation of business processes, deciding the most appropriate work-flow in each case. Unfortunately, data dependencies among the activities and how they can affect the correct execution of the process, has been overlooked in the declarative specifications and configurable systems found in the literature. In order to find the best process configuration for optimizing the execution time of processes according to data dependencies, we propose the use of Constraint Programming paradigm with the aim of obtaining an adaptable imperative model in function of the data dependencies of the activities described declarative.

The aim of this work is the preparation of contact active antimicrobial films by blending copolymers with quaternary ammonium salts and polyacrylonitrile as matrix material. A series of copolymers based on acrylonitrile and methacrylic monomers with quaternizable groups were designed with the purpose of investigating the influence of their chemical and structural characteristics on the antimicrobial activity of these surfaces. The biocide activity of these systems was studied against different microorganisms, such as the Gram-positive bacteria Staphylococcus aureus and the Gram-negative bacteria Pseudomona aeruginosa and the yeast Candida parapsilosis. The results confirmed that parameters such as flexibility and polarity of the antimicrobial polymers immobilized on the surfaces strongly affect the efficiency against microorganisms. In contrast to the behavior of copolymers in water solutions, when they are tethered to the surface, the active cationic groups are less accessible and then the mobility of the side chain is critical for a good contact with the microorganism. Blend films composed of copolymers with high positive charge density and chain mobility present up to a more than 99.999% killing efficiency against the studied microorganisms.

Nemaline myopathy (NM) is one of the most common forms of congenital myopathy and it is identified by the presence of "nemaline bodies" (rods) in muscle fibers by histopathological exam-ination. The most common forms of NM are caused by mutations in the ACTA1 (Actin Alpha 1) and NEB (Nebulin) genes. Clinical features include hypotonia and muscle weakness. Unfortunate-ly, there is no curative treatment and the pathogenetic mechanisms remains unclear. In this man-uscript, we examined the pathophysiological alterations in NM using dermal fibroblasts derived from patients with mutations in ACTA1 and NEB genes. Patients’ fibroblasts were stained with rhodamine phalloidin to analyze the polymerization of actin filaments by fluorescence microsco-py. We found that patients' fibroblasts showed incorrect actin filament polymerization compared to control fibroblasts. Actin filament polymerization defects was associated with mitochondrial dysfunction. Furthermore, we identified two mitochondrial boosting compounds, linoleic acid (LA) and L-carnitine (LCAR), that improved the formation of actin filaments in mutant fibro-blasts and corrected mitochondrial bioenergetics. Our results indicate that cellular models can be useful to study the pathophysiological mechanisms involved in NM and to find new potential therapies. Furthermore, targeting mitochondrial dysfunction with LA and LCAR can revert the pathological alterations in NM cellular models.

It is known that high N doses, N/K imbalances, and frequent irrigation favor verticillium wilt. The influence of fertilization and its interaction with the frequency of irrigation on the development of Verticillium wilt of olive (VWO) has been evaluated. A split-split-plot design in microplots with two naturally infested soils of different texture was established for studying three fertilization treatments (NO3Ca, N-P-K and without fertilization), plus two irrigation frequencies (daily and deficit). The treatments were applied by means of fertigation, evaluating the susceptible cultivar Picual. Final disease incidence in plants subjected to NO3Ca-daily treatment was 100% regardless soil texture. However, final mortality in these plants was 37% and 85.2% in clay and sandy loam soils, respectively. As well, the area under the disease progress curve values were significantly higher (49.1%) in plants subjected to NO3Ca fertilization compared to those not fertilized or fertilized with N-P-K when plants grown in clay soil. This value in the sandy loam soil was significantly higher in the NO3Ca-daily irrigation treatment (94.3%), followed by the N-P-K-daily treatment (61.1%) which also was significantly higher than the unfertilized-daily, N-deficit and NPK-deficit treatments (37.8, 42.6 and 44.9 %, respectively). The plants submitted to unfertilized-deficit treatment reached the lowest value 9.6%. In this work it can be concluded that the application of fertilizer or the application of fertilizer with daily frequency irrigations in naturally infested soils increases the development of VWO in 'Picual'.

Iberian ham, a traditional Spanish meat product, is renowned for its unique nutritional and sensory attributes, garnering widespread appreciation both domestically and internationally [1]. It is one of the most outstanding Spanish gastronomic treasures, with very special nutritional and sensory properties that make it highly appreciated throughout the world [2]. Recent trends indicate a notable surge in its consumption, a pattern projected to persist [3]. For an enhanced online shopping experience, understanding the specific characteristics and requirements of various consumer segments is crucial. This study aims to scrutinize national Iberian ham consumption patterns and, through survey methodologies, discern the preferences and needs of online consumers purchasing whole Iberian hams. The subsequent cluster analysis will empower suppliers with insights to pinpoint business prospects and craft segment-specific online marketing strategies.

Introduction: Osteosarcomas of the jaw (OSJ) are rare tumors with a different behavior from osteosarcomas of other bones. This study aims to analyze the clinical, pathological, and therapeutic characteristics of this type of sarcoma. Methods: a retrospective observational study of cases diagnosed with OSJ registered at the “La Paz” University Hospital (Madrid). Results: Eight cases with a diagnosis of OSJ were obtained in a study period of 22 years (2000-2022). The mean age was 41 years. The distribution was 1:1 between the maxilla and mandible. Painful inflammation was the most frequent clinical manifestation. Conventional osteoblastic osteosarcoma was the most common. Survival at 5 years was 50%, while at 10 years, it decreased to 25%. Conclusions: OSJ differs from conventional osteosarcomas of long tubular bones. Surgery continues to be the mainstay of treatment; more studies are needed in which more standardized protocols can be proposed for adjuvant therapeutic management.

We utilized all Spanish marriage records available at the municipality level from 2005-2007 to model spatial variations in intermarriage. We constructed a spatial regime zero inflated Poisson model and grouped-data probit model, with spatially lagged regressors, to predict the absolute and relative presence of intermarriage between Spaniards and migrants based on structural characteristics of the local marriage markets and their neighboring areas (i.e., relative group size, homogeneity of national origins, and sex ratio indicators). Our models do not assume collapsibility of the marriage market. Instead, they incorporate the local dimension of the marriage market and examine the association between intermarriage and structural variables at the spatial local level. The model also investigates intermarriage variation by size of place. The local characteristics of the marriage markets are robust indicators of both the absolute and relative importance of intermarriage, but their impact varies by size of municipality. The relative size of the migrant community positively impacts intermarriage. The homogeneity of the origins of migrants is negatively related to it. The impact of sex ratios in the migrant and native communities on intermarriage is not uniform across all municipalities and is not always related to more intermarriage.

In 1944 the architect Antonio Gómez Davó designed and built a new house for Mr. Ferrer at Rocafort in the suburbs of Valencia (Spain). In this same year, Europe, America, Russia and even Japan were still at war and Spain was only recovering from its own intestine conflict. Therefore, architectural innovations and influences were scarce as was the circulation of specialized journals on the matter. But in many creations, like the ceramic vaults and the brise-soleil, Le Corbusier himself had declared his profound nostalgia from the Mediterranean, a Sea that he had come to appreciate in his travels to the “orient”. In the case of Gómez Davó, having been born and raised in a prominent family of Valencia he could not remain indifferent to the design features that appeared in the vernacular architecture of the area, specially the type of inclined louvers of Arabic descent, that covered bow-windows and balconies and which have come to be known in Spain as the Majorcan louvers; nowadays even employed by Rafael Moneo for instance at the extension of the Painter Miro Foundation. However, with so many difficult circumstances surrounding him, Gómez Davó could not get to the point of producing a ground breaking design based on solar assumptions for the whole façade of the building, instead when providing an entrance porch apt for spending life, meals and well deserved rest hours outdoors in the pure Mediterranean tradition, he ventured to construct a surprising perforated wall oriented to the South in order to control radiation in winter and provide shade in the summer while affording excellent light and superb conditions of ventilation. By means of our own devised simulation tools we have analyzed the conditions of the house and especially of such innovative brise-soleil at times reminiscent of Alvar Aalto solutions for day-lit roofs, which he was aware intuitively and by his own incipient study of solar geometry, that needed adaptation from so distant latitudes as Finland and Valencia. By outlining such unknown and bold precedent we contribute to revitalize the early and daring pioneers of solar architecture in peripheral Spain and Europe, at the birth of critic regionalism, a fact often disregarded in conventional history of Modern Architecture.

Self-perceived health is an important indicator of occupational health. This research explores the relationship between poor self-perceived health and exposure to psychosocial risk factors, taking into account potential socio-demographic, occupational and employment determinants. Using data from the First Survey of Occupational Safety and Health Conditions covering 1049 salaried workers in Guayaquil, Ecuador descriptive and stratified binary logistic regression analyses (Odds Ratios with corresponding 95% confidence intervals) were carried out. No significant relationship was found between exposure to psychosocial risk factors and the probability of presenting poor self-perceived health by socio-demographic, occupational and employment characteristics. Occupational exposure factors to psychosocial risks are predictors of self-perceived ill health and are related to the variables analyzed; the most frequently expressed factors among the respondents were Cognitive Demands (DGOG) and Job Insecurity (IL). The results have implications in terms of designing effective workplace interventions pursuant of ensuring the health and wellbeing of employee.

Asthma is a significant public health concern. This study identified the provinces with the highest morbidity and mortality rates due to asthma among the working-age population (15-69 years) in the Republic of Ecuador. The secondary objective was to explain the possible differences attribut-able to occupational exposure. This nationwide ecological and exploratory study was conducted in 24 provinces between 2016 and 2019. Government databases were used as sources of infor-mation. Standardized rates were calculated for codes the J45 and J46. The hospitalization mor-bidity rate for asthma decreased from 6.51 to 5.76 cases per 100,000 working-age population, and the mortality rate has consistently been low and stable from 0.14 to 0.15 deaths per 100,000 working-age population. Geographic differences between the provinces were evident. The risk of hospitalization and death due to asthma was higher in the Pacific coast (five provinces) and the Andean region (two provinces). The high rates observed in provinces with greater agricultural and industrial development could be the main determinants of national heterogeneity and could act as occupational risk factors. The contribution of occupational hazards in each province should be examined in depth through ad hoc studies. These findings provide valuable information for creating public policies aimed at promoting and safeguarding the respiratory health of the popu-lation, particularly that of workers.

In spite of its incidence on pistachio trees, the chemical ecology of Labidostomis lusitanica (Germar) (Coleoptera: Chrysomelidae) has been neglected so far. In this work we provide the first evidence of a biologically active male-specific compound that may be promoting field aggregation. Headspace collections by solid-phase microextraction from feral males and females reported the presence of 2-isobutyl-3-methoxypyrazine exclusively on males. Electroantennographic recordings revealed that males and females responded in a dose-dependent manner to increasing stimuli of 2-isobutyl-3-methoxypyrazine, with females overall displaying a higher response than males. In dual-choice tests, both males and females showed a significant preference for the compound in comparison to a pure air stimulus. In the light of these results, the possible role of 2-isobutyl-3-methoxypyrazine as an aggregation cue in L. lusitanica is discussed.

The relative proportions between nutrients affects the fate of them for metabolic interconversion, storage and turnover or, essentially for energy, in a process of partition modulated by hormonal and metabolic factors. A basic common chow model was used: ST or standard diet, HF high-fat and HP or high-protein had a common substrate. A CF cafeteria-type diet was added for comparison. Rats (female and male) received the diet for 30d. Nutrient intake and body composition were measured. Plasma glucose, lactate, testosterone (T) and estradiol (E2) were measured. Common groups energy intake, was largely based in carbohydrates CH, yielding 6C units, which were fully oxidized or stored as 2C fragments (fatty acids). Lactate (3C) was partially stored as glycerol of TAG. Accrual of 2C far exceeded about ten-fold that of 3C. Amino acid (AA) catabolism yielded 2C, 3C and 4C-5C fragments, the latter acting as Krebs cycle anaplerotic intermediates (KCAI), that facilitated the oxidation of 2C in detriment of TAG accumulation Lactate levels, were related to lactic dehydrogenase activities in muscle and liver. TAG accrual was maximal in CF, quite differently from HF with similar diet lipid proportion. Maximal rates of lipid storage were found in ST (and CF) groups. Females showed a higher ability to oxidize CH and to store less TAG. T increased N and protein deposition, whilst E2 decreased them favoring AA oxidation and the availability of KCAI. In the rat, an effective energy partition scheme requires that about half of the energy is provided by CH (polysaccharide), and needs enough protein to provide KCAI for a smooth 2C oxidation.

The term neurodegeneration with brain iron accumulation (NBIA) brings together a broad set of progressive and disabling neurological genetic disorders in which iron is deposited preferentially in certain areas of the brain. Among NBIA disorders, the most frequent subtype is pantothenate kinase-associated neurodegeneration (PKAN) caused by pathologic variants in the PANK2 gene codifying the enzyme pantothenate kinase 2 (PANK2). Nowadays, there are no effective treatments to stop the progression of these diseases. This review discusses the utility of patient-derived cell models as a valuable tool for the identification of commercial pharmacological or natural compounds for implementing polytarget precision medicine in PKAN. In the last years, several studies have described that PKAN patient-derived fibroblasts manifest the main pathological changes associated with the disease including intracellular iron overload. Interestingly, treatment of mutant cell cultures with various supplements such as pantothenate, pantethine, thiamine, L-carnitine, vitamin E, omega 3, and -lipoic acid improved all pathophysiological alterations in PKAN fibroblasts with residual expression of the PANK2 enzyme. The information provided by pharmacological screenings in patient-derived cellular models can help to optimize therapeutic strategies in individual PKAN patients.

Early detection of stress can prevent us from suffering from a long-term illness such as depression and anxiety. This article presents a scoping review of stress detection based on electrodermal activity (EDA) and machine learning (ML). From an initial set of 395 articles searched in six scientific databases, 58 were finally selected according to various criteria established. The scoping review has made it possible to analyse all the steps to which the EDA signals are subjected: acquisition, preprocessing, processing and feature extraction. Finally, all the ML techniques applied to the features of this signal have been studied for stress detection. It has been found that support vector machines and artificial neural networks stand out within the supervised learning methods given their high performance values. On the contrary, it has been evidenced that unsupervised learning is not very common in the detection of stress through EDA. This scoping review concludes that the use of EDA for the detection of arousal variation (and stress detection) is widely spread, with very good results in its prediction with the ML methods found during this review.

Self-efficacy and perfectionism play an important role in high-performance activities. This cross-sectional study analyses the relationship between these constructs and resilience in a sample of 145 music students (57.9% female) with a mean age of 27.77 years. Perfectionism was assessed using the Multidimensional Inventory of Perfectionism in Sport, resilience using the Resilience Scale, and self-efficacy using the General Self-Efficacy Scale. Compared to those with low resilience, students with high resilience score higher on self-efficacy and lower on dysfunctional perfectionism. No differences were observed in the total perfectionism score or adaptive perfectionism. Self-efficacy shows significant predictive power for resilience (β = .525, p &lt; .001). Although functional perfectionism did not significantly predict resilience, a marginal negative relationship was found between dysfunctional perfectionism and resilience (β = - .156, p = .063). The results are discussed concerning their implications for music pedagogy and teacher intervention.

This paper presents new above-ground biomass (AGB) and biomass components equations for seventeen forest species in the temperate forests of northwestern Mexico. A data set corresponding to 1336 destructively sampled oak and pine trees was used to fit the models. Generalized method of moments was used to simultaneously fit systems of equations for biomass components and AGB, to ensure additivity. Additionally, the carbon content of each tree component was calculated by the dry combustion method, in a TOC analyser. The fitted equations accounted for on average 91, 83, 84 and 78% of the observed variance in stem wood and stem bark, branch and foliage biomass, respectively, whereas the total AGB equations explained on average 93% of the total observed variance in AGB. The inclusion of h or d²h as additional predictor in the d-only based equations systems slightly improved estimates of stem wood, stem bark and total above-ground biomass, and greatly improved the estimates produced by the branch and foliage biomass equations. The fitted equations were used to estimate AGB stocks at stand level from a database on growing stock from 429 permanent sampling plots. Three machine-learning techniques were used to model the estimated stand level AGB and carbon contents; the selected models were applied to map the AGB and carbon distributions in the study area, which yielded mean values of 129.84 Mg ha^-1 and 63.80 Mg ha^-1, respectively.

In this paper we deal with the resolution of a fuzzy multiobjective programming problem using the level sets optimization. We compare it to other optimization strategies studied until now and we propose an algorithm to identify possible Pareto efficient optimal solutions.

This article has two objectives. Firstly, we will use the vector variational-like inequalities problems to achieve local approximate (weakly) efficient solutions of Vector Optimization Problem within the novel field of the Hadamard manifolds. Previously, we will introduce the concepts of generalized approximate geodesic convex functions and illustrate them with examples. We will see the minimum requirements under which critical points, solutions of Stampacchia and Minty weak variational-like inequalities and local approximate weakly efficient solutions can be identified, extending previous results from the literature for linear Euclidean spaces. Secondly, we will show an economical application, using again solutions of the variational problems to identify with Stackelberg equilibrium points on Hadamard manifolds and under geodesic convexity assumptions.

Overweight and Obesity are global health and economic concerns. According to the World Health Organization, the number of individuals with obesity has nearly tripled since 1975. This health issue is currently considered an epidemic, affecting over 1.9 billion adults and 340 million children and adolescents. It contributes to more than 5 million deaths each year and has a global economic burden that will reach $4.32 trillion annually by 2035, according to the World Obesity Federation. This disease can affect every system of the human body and can lead to complications such as metabolic syndrome, diabetes, cancer, dyslipidemia, cardiovascular diseases, and hypertension, among others. Treatment may sometimes include diet, exercise, drugs, and bariatric surgery. Nonetheless, not all people have access to these treatments, and public health strategies consider prevention the most important factor. In this regard, recent investigations are aiming to find alternatives and adjuvants for the treatment of obesity, its prevention, and the reversion of some of its complications, using natural sources of anti-obesogenic compounds like polyphenols, terpenes, alkaloids, saponins, among others. In this review, we gather the most current information using PubMed, Google Scholar, Scopus, Cochrane, and Web of Science. We present and discuss the current information about natural products that have shown anti-obesogenic effects at a molecular level. We also consider the impact of dietary habits and lifestyle in preventing overweight and obesity due to the evidence of the benefits of certain foods and compounds consumed regularly. We discuss mechanisms, pathways, and receptors involved in the modulation of obesity, especially those related to inflammation and oxidative stress linked to this disease, due to the relevance of these two aspects in developing complications.

Herpes simplex virus type 1 (HSV-1) is a neurotropic virus that, occasionally, may spread to the central nervous system (CNS), being the most common cause of sporadic encephalitis. One of the main neurovirulence factors of HSV-1 is the protein ICP34.5 that, although initially seemed to be relevant only in neuronal infections, it can also promote viral replication in non-neuronal cells. New ICP34.5 functions have been discovered during the recent years, and some of them have been questioned. This review describes the mechanisms of ICP34.5 to control cellular antiviral responses and debates its most controversial functions. One of the most discussed roles of ICP34.5 is autophagy inhibition. Although autophagy is considered a defense mechanism against viral infections, current evidence suggests that this antiviral function is only one side of the coin. Different types of autophagic pathways interact with HSV-1 impairing or enhancing the infection, and both the virus and the host cell modulate these pathways to tip the scales in its favor. In this review, we will summarize the recent progress on the interplay between autophagy and HSV-1, focusing on the intricate role of ICP34.5 in the modulation of this pathway to gain the battle against cellular defenses.

This work is intended to lead a study of necessary and sufficient optimality conditions for scalar optimization problems on Hadamard manifolds. In the context of this geometry, we obtain and present new function types characterized by the property of having all their second-order stationary points to be global minimums. In order to do so, we extend the concept convexity in Euclidean space to a more general notion of invexity on Hadamard manifolds. This is done employing notions of second-order directional derivative, second-order pseudoinvexity functions and the second-order Karush-Kuhn-Tucker-pseudoinvexity problem. Thus, we prove that every second-order stationary point is a global minimum if and only if the problem is either second-order pseudoinvex or second-order KKT-pseudoinvex depending on whether the problem regards unconstrained or constrained scalar optimization respectively. This result has not been presented in the literature before. Finally, examples of these new characterizations are provided in the context of \textit{"Higgs Boson like"} potentials among others.

: Background: Overweight and obesity are major risk factors for many chronic diseases, and weight-loss interventions often include systematic exercising and nutritional supplements. The purpose of this study was to determine the independent/synergistic effects of Spirulina maxima supplementation (6-week, 4.5 g/day) and a systematic physical exercise program (6 weeks/ 2 times) on body composition and cardiorespiratory fitness of overweight and obese subjects. Methods: 27 overweight and 25 obese sedentary male subjects were assigned to four interventions through a randomized double-blind, crossover controlled trial: Physical exercise program with (SE) or without (Ex) Spirulina maxima or no-exercise program with (Sm) and without (C) Spirulina maxima. Body composition and cardiorespiratory fitness parameters were taken during a maximal intensity test. Results: As compared to C group, SE, Sm and Ex groups reduced (p < 0.05) their body fat percentage while improving their maximal oxygen uptake (VO₂max; r = −0.40), being obese subjects more benefited. Weight loss, time to reach fatigue and onset of blood lactate accumulation were improved in both Spirulina maxima supplemented groups, regardless the subjects’ body composition. Conclusions: Spirulina maxima supplementation synergistically improves the effects of systematic exercise in body composition and cardiorespiratory fitness parameters in overweight but mostly in obese adults.

Objective: To carry out a bibliometric analysis study of systematic reviews and meta-analyses in dentistry, divided into different thematic areas. Material and method: A search was conducted in the Science Citation Index-Expanded on the core collection of Web of Science, they were selected from the area of Dentistry and Oral Surgery and Medicine categories, the data was downloaded on April 20, 2022 and The 100 most cited articles from each of the thematic areas were selected. Results: An increase in this type of articles was observed in the last decade in the areas of pediatric and medical dentistry and oral pathology. The thematic area that received the most citations was periodontics. The two authors with the most citations are Zwahlen, Marcel and Pjetursson, Bjarni Eluar. The countries that receive the most citations are European, along with the USA and China. The topics that are most published in this type of article deal with Cancer with 50 publications, caries treatment with 25 and fluoridation with 1. The entities that finance this type of articles the most are private companies (26.76%). Conclusions: Together with an exponential increase in the number of publications in dentistry, there has been an increase in the number of publications in systematic reviews. The areas publishing the most articles and having the most citations are Periodontics and Implantology, despite the fact that the most studied topic is cancer.

In this paper, the power quality of interconnected microgrids is managed using a Model Predictive Control (MPC) methodology which manipulates the power converters of the microgrids in order to achieve the requirements. The control algorithm is developed for the microgrids working modes: grid-connected, islanded and interconnected. The results and simulations are also applied to the transition between the different working modes. In order to show the potential of the control algorithm, a comparison study is carried out with classical Proportional-Integral Pulse Width Modulation (PI-PWM) based controllers. The proposed control algorithm not only improves the transient response in comparison with classical methods but also shows an optimal behavior in all the working modes, minimizing the harmonics content in current and voltage even with the presence of non-balanced and non-harmonic-free three-phase voltage and current systems

Human societies demand sustainable alternatives for goods and services. Plants are sustainable sources of important metabolites with beneficial impacts on human health. There are many reported methodologies and commercial suppliers for extract preparations from the plant Mucuna sp. They usually claim to be enriched in L-dopa, their distinctive metabolite. However, there are poor characterizations of the metabolite's components in that extracts. Here, we present the metabolite characterization of a Mucuna seed extract, emphasizing the L-dopa identification and quantification. To obtain the extracts, we follow a green and sustainable extraction protocol. The lyophilized extract was subject to liquid chromatography and mass spectrometry to identify its primary metabolites. Additionally, we follow thin-layer chromatography to identify some carbohydrates in the sample. The resultant extract has a 56% L-dopa. Other main components in the extract were arginine, stizolamine, and the fructooligosaccharides sucrose and nystose. The characterized Mucuna extract can be easily standardized as powder presentation and used in several biomedical applications.

Pregnant women have been considered a high-risk group for SARS-CoV-2 infection; the impact of the disease on the health of a mother and her child is still being studied. The emotional impact of the pandemic on pregnant women has been extensively studied. Emotional distress is proposed as a perspective to explain the emotional manifestations of women during this stage as something common rather than pathological. The objective of this study was to know the emotional experience of women who tested positive for SARS-CoV-2 towards the end of their pregnancy, during the first and second waves of COVID in Mexico. A qualitative study was carried out: 18 pregnant women with COVID were interviewed. A thematic analysis of the data was performed, resulting in three main themes and 14 subthemes. The COVID-infected mothers-to-be experienced mild to moderate emotional distress. It was more intense for those with comorbidities. This distress was aggravated during obstetrical complications and comorbidities, as well as during COVID and postpartum. The emotional distress was appeased by both the perception of medical care and social support. The emotional distress of pregnant women with COVID requires emotional accompaniment to reduce its impact.

Cornea severe inflammation produces opacity or even perforation, scarring, and angiogenesis, resulting in blindness. The cornea can be used to study the effect of new anti-angiogenic chemopreventive agents. We researched the anti-angiogenic effect of two extracts, Methanol (Met) and Hexane (Hex), from the seed of Cucurbita argyrosperma, in the inflamed corneas. The corneas of Wistar rats were alkali-injured and treated intragastrically for seven successive days. Clinical manifestation as opacity score, corneal neovascularization (CNV) area, re-epithelialization percentage, and histological evaluation were performed. Inflammatory (COX-2, NF-κB, and IL-1β), and angiogenic (VEGF-A, VEGFR1, VEGFR2) markers were assessed by immunohistochemistry. Cox-2, Il-1β, and Vegf-a mRNA levels were also determined. After treatments, we observed slim corneal thickness with lower opacity scores and low cell infiltration compared to untreated rats. Treatment also accelerated wound healing and decreased CNV area. The staining of inflammatory and angiogenic factors was significantly decreased. These effects are related to a down-expression of Cox-2, Il-1β, and Vegf. These results suggest that intake of C. argyrosperma seed can be used to attenuate the angiogenesis secondary to inflammation in corneal chemical damage.

Background: The relationship between adherence to the Mediterranean Diet (MD) and both physical fitness (PF) and physical activity (PA) level has been analysed in several studies. The aim of this research was to describe, compare and analyse the level of PF and PA in schoolchildren aged 6-13 in the Region of Murcia, according to adherence to the MD. Methods: A descriptive and cross-sectional study was performed. A total of 370 schoolchildren (44.9% girls) aged 6-13 (8.7±1.8) from six primary schools in the Region of Murcia (Spain). Results: Only 25.9% of the schoolchildren had optimal adherence to the MD. Regarding the scores of the different PF tests in MD groups, only statistically significant differences were found for CRF (p=0.048) in boys. PA level, showed statistically significant differences in both boys (p=0.040) and girls (p=0.016). A positive relationship was found between the KIDMED index and CRF (ρ=.127), standing broad jump (ρ=.133) and PA level (ρ=.235). A higher probability of having a greater CRF (OR=1.17; CI95%=1.02–1.34) and PA level (OR=7.84; CI95%=2.84–21.60) was found in High MD group. Conclusion: These results suggest that an optimal adherence to the MD is associated with higher CRF and PA level in the selected schoolchildren.

In the present paper, we efficiently solve the two-body problem for extreme cases such as those with high eccentricities. The use of numerical methods, with the usual variables, cannot maintain the perihelion passage accurately. In previous articles, we have verified that this problem is treated more adequately through temporal reparametrizations related to the mean anomaly through the partition function. The biparametric family of anomalies, with an appropriate partition function, allows a systematic study of these transformations. In the present work, we consider the elliptical orbit as a meridian section of the ellipsoid of revolution, and the partition function depends on two variables raised to specific parameters. One of the variables is the mean radius of the ellipsoid at the secondary, and the other is the distance to the primary. One parameter regulates the concentration of points in the apoapsis region, and the other produces a symmetrical displacement between the polar and equatorial regions. The three most used geodesy latitude variables are also studied, resulting in one not belonging to the biparametric family. However, it is in the one introduced now, which implies an extension of the biparametric method. The results obtained by the method presented here now allow a causal interpretation of the operation of numerous reparametrizations used in the study of orbital motion.

Acute and chronic bone infections, especially those caused by methicillin-resistant Staphylococcus aureus (MRSA), remains a major complication and therapeutic challenge. It is documented that local administration of vancomycin offers better results than the usual routes of administration (e.g. intravenous) when ischemic areas are present. In this work, we evaluate the antimicrobial efficacy against S. aureus and S. epidermidis and analyzed the potential cytotoxic effect of a novel hybrid 3D-printed scaffold based on poly(caprolactone) and chitosan loaded with different vancomycin concentrations (1, 5, 10 and 20%). For this purpose, vancomycin release was measured by means of HPLC, and the biological response of ah-BM-MSCs in the presence of the scaffolds was evaluated in terms of cytotoxicity (LDH activity), proliferation (AlamarBlueⓇ) and osteogenic differentiation (ALP activity, Alizarin Red staining). In addition, two cold plasma treatments were evaluated to improve the adhesion of hydrophobic polymers to hydrogels. The hybrid PCL/CS/Van scaffolds tested were found to be biocompatible, bioactive, and bactericide, as demonstrated by no cytotoxicity or functional alteration and by bacterial inhibition. Our results suggest that the scaffolds developed would be excellent candidates to be used in a wide range of biomedical fields such as drug delivery systems or tissue engineering applications.

Gold nanoparticles (AuNPs) have been used in a broad range of applications conferring to bio-molecules diverse proprieties such as deliver, stabilization and reduction of adverse effects of drugs or plant ex-tracts. Polyphenolic compounds from Bacopa procumbens (BP) are able to modulate proliferation, adhesion, migration and cell differentiation, reducing artificial scratch area in fibroblast cultures and promoting wound healing in in vivo model. Here, chemically synthetized AuNPs conjugated with BP (AuNP-BP) were characterized by Uv-Vis, ATR-FTIR, DLS and zeta-potential. Results showed over-lapping FTIR spectra of polyphenolic compounds from B. procumbens capping the AuNPs, stable size by the DLS and zeta potential, AuNP-BP was 44.58 nm, the zeta-potential of AuNPs was -36.3±12.3 mV after conjugation with the BP; - (AuNP-BP), the zeta-potential was reduced to -18-2±7.02 mV. Enhancement of wound healing effect were evaluated by morphometric, histochemical and FTIR changes in rat wound excision model. Results showed that the nanoconjugation process reduced 100 folds BP concentrations to have the same wound healing effect of BP alone. Besides histological and FTIR spec-troscopy analyses, demonstrated that AuNP-BP treatment displayed better macroscopical performance; the reduction on inflammatory cells, and the increased synthesis and better organization of collagen fibers.

Neurodegeneration with brain iron accumulation (NBIA) is a group of rare neurogenetic dis-orders frequently associated with iron accumulation in the basal nuclei of the brain. Among NBIA subtypes, β -propeller protein-associated neurodegeneration (BPAN) is associated with mutations in the autophagy gene WDR45. The aim of this study was to demonstrate autophagic defects and secondary pathological con-sequences in cellular models derived from two patient harboring WDR45 mutations. Both protein and mRNA expression levels of WDR45 were decreased in patient-derived fibro-blasts. In addition, the increase of LC3B upon treatments with autophagy inducers or inhibitors was lower in mutant cells compared to control cells, suggesting decreased autophagosome formation and impaired autophagic flux. Transmission electron microscopy (TEM) analysis showed mitochondrial vacuolization associated with accumulation of lipofuscin-like aggregates containing undegraded material. Autophagy dysregulation was also associated with iron ac-cumulation and lipid peroxidation. In addition, mutant fibroblasts showed altered mitochon-drial bioenergetics. Antioxidants such as pantothenate, vitamin E and α-lipoic prevented lipid peroxidation and iron accumulation. However, antioxidants were not able to correct the ex-pression levels of WDR45 neither the autophagy defect nor cell bioenergetics. Our study demonstrated that WDR45 mutations in BPAN cellular models impaired autophagy, iron metabolism and cell bioenergetics. Antioxidant partially improved cell physiopathology, however autophagy and cell bioenergetics remained affected.

The objective of this work is to compare how the gases emitted during the manufacture of the clinker vary in a cement plant, using two types of fuel: petroleum coke and unusable tires (UTs). The study is based on a case study using real time data on more than 40 process variables. Gases are analysed from two points of the production process: Sintering Kiln, main focus of emission to the atmosphere by chimney, and Preheater. The variation of CO and NOx depending on the oxygen and fuel type is studied. The SO2 levels are also analyzed, observing a decrease when using the UTs. The quality of the Clinker has been compared depending on the fuel type. The results are compared, on the one hand, with the quality of the clinker, determined by the content of the majority (C3S, Alite) and minority (Free CaO) phases, and, on the other hand, with the Kiln sintering temperature, the most influential parameter in the productive process. It is verified that Clinker quality is maintained, regardless of the type of fuel used. Concluding that the use of UTs as fuel can generate an important economic and environmental benefit for cement companies and their environment.

Abstract: Despite existing several techniques for distributed sensing (temperature and strain) using standard Single Mode optical Fiber (SMF), compensating or decoupling both effects is mandatory for many applications. Currently, most of the decoupling techniques require special optical fibers and are difficult to implement with high spatial resolution distributed techniques, such as ϕ-PA-OFDR. So, this work’s objective is to study the feasibility of decoupling temperature and strain out of a ϕ-PA-OFDR readouts taken over an SMF. For this purpose, the readouts will be subjected to a study using several Machine Learning algorithms, among them, Deep Neural Networks. The motivation which underlies this target is the current blockage in the widespread use of Fiber Optic Sensors in situations where both strain and temperature change, due to the coupled dependence of currently developed sensing methods. Instead of using other types of sensors or even other interrogation methods, the objective of this work is to analyze the available information in order to develop a sensing method capable of providing information about strain and temperature simultaneously.

Literature on the use of nutritional supplements (NS) in tennis players is scarce. The objective of the present study was to evaluate NS consumption in a group of men's tennis players who participated in the 2016 Andalusian team championship. A total of 70 questionnaires from 7 different clubs were registered. The questionnaire was previously designed and evaluated through piloting in which the validity of the content, its application, its structure and its presentation were observed. The results showed that 100% of the sample group was in favor of NS consumption within the law, 88.6% claimed to have consumed them at some time and 61.4% presently consume them. The NS most consumed by study participants were sports drinks (69.35%), energy bars (29%), a vitamin complex (19.35%), protein (serum) (17.74%) and creatine (14.51%). A high percentage of NS consumers thought that they had obtained positive results from NS consumption. The percentages and the findings regarding NS consumption in the present study were similar to the contributions made by other studies which evaluated supplementation in athletes, although with some subtle differences.

Commercially pure (c.p.) iron powders with a deliberate high degree of oxidation were consolidated by medium-frequency electrical resistance sintering (MF-ERS). This is a consolidation technique where pressure, and heat coming from a low-voltage and high-intensity electrical current, are simultaneously applied to a powder mass. In this work, the achieved densification rate is interpreted according to a qualitative microscopic model, based on the compacts global porosity and electrical resistance evolution. The effect of current intensity and sintering time on compacts was studied on the basis of micrographs revealing the porosity distribution inside the sintered compact. The microstructural characteristics of compacts consolidated by the traditional cold-press and furnace-sinter powder metallurgy route are compared with results of MF-ERS consolidation. The goodness of MF-ERS versus the problems of conventional sintering when working with oxidized powders is analyzed. The electrical consolidation allows to obtain higher densifications than the traditional route under non-reducing atmospheres.

A single water pollution by dyes is a huge environmental problem; there is a necessity to produce new decolorization methods that are effective, cost-attractive, and suitable in industrial use. Magnetic chitosan polymers offer the advantage of easy separation from the dye solution. In this work, a Chitosan-Fe polymer was synthesized, characterized, and tested for removal of the azo dye Direct Red 83:1 from water. The polymer was characterized in terms of surface morphology (SEM), elemental analysis (EA), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), infrared spectrophotometry (IR), X-ray powder diffraction (XRD) and density functional theory (DFT). The reported results hint that 1 g and pH 7.0 were the best conditions to carry out both kinetic and isotherm models. To understand the adsorption behavior of Direct Red 83:1 onto the polymers, adsorption rate and maximum adsorption capacity were calculated using kinetic tests and isotherm curves respectively. The kinetic data and mechanism of the adsorption process were analyzed by three models and the equilibrium data by three adsorption isotherms. The results indicated that the adsorption process follows a pseudo-second-order kinetics (R2= 0.999) and fits the Temkin isotherm (R2= 0.946), indicating that the adsorption occurred on heterogeneous surfaces. The newly synthesized Chitosan-Fe polymer exhibited good adsorption properties and easy separation of cleaned water.

South rear-edge populations of widely distributed temperate and boreal tree species such as birches (Betula pubescens and B. pendula) are considered particularly vulnerable to climate warming, and at the same time they constitute genetic reservoirs of drought-adapted ecotypes. Here, we compared radial growth patterns and responses to climate, river or dam flows and a drought index of rear-edge (southernmost) populations (Toledo Mountains, central-southern Spain) with populations located in northern Spain of B. pubescens and B. pendula. Then, we per-formed a comparative analysis across Europe of B. pendula populations. The main climatic con-straint of birch growth was high summer water deficit, although the effect of local hydrological conditions was particularly important in rear-edge populations. We found declining growth trends in rear-edge stands since the early 21st century, related to decreasing water availability and increasing aridity. Our results also suggested distinct growth patterns and climate-growth associations of B. pendula across Europe that show how populations further south and in warmer locations were more sensitive to the drought. In conclusion, drought-induced growth decline can be exacerbated by local human land uses leading to reduced river inflow, thus endangering birch populations at their southern distribution limit. Protection of endangered rear-edge birch populations requires adequate management of local water resources.

Iapetus, a Saturn moon, shows the most differentiated albedo dichotomy of the Solar System. The dark leading side has a lower albedo than the bright trailing side. Spectral data on the visible light reveal the existence of two types of materials on the surface. The darkening in the leading side is thought to be originated by the presence of organic material and carbonaceous compounds on surface, while the trailing side is covered by water ice due to migration processes from the dark side. On airless bodies like Iapetus, the surface escape speed is greater than the speed of water molecules, resulting in the retention of a H2O atmosphere that allows some species to get diffused through it. Here, there were performed simulations of the evolution of the surface temperature for each of the two hemispheres of Iapetus. The results showed a slow yet steady increment of temperatures for both sides, with a steeper slope for the dark hemisphere. It was also simulated how much energy budget can be accumulated in both sides and its consequences. Finally, we calculated the diffusion coefficients for ammonia, methane, and water ice. The results let us infer how these compounds could evolve over time.

The emerging whitefly-transmitted crinivirus Tomato chlorosis virus (ToCV) causes substantial economic losses by inducing yellow leaf disorder in tomato crops. This study explores potential resistance mechanisms by examining early-stage molecular responses to ToCV. A time-course transcriptome analysis compared naïve, mock and ToCV-infected plants at 2, 7, and 14 days post-infection (dpi). Gene expression changes were most notable at 2 and 14 dpi, likely corresponding to whitefly feeding and viral infection. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analyses revealed key genes and pathways associated with ToCV infection, including those related to plant immunity, flavonoids and steroids biosynthesis, photosynthesis, and hormone signalling. Additionally, virus-derived small interfering RNAs (vsRNAs) originating from ToCV predominantly came from RNA2 and were 22 nucleotides in lengt. To confirm these findings, two genes involved in plant immunity, Hsp90 (heat shock protein 90) and its co-chaperone Sgt1 (suppressor of the G2 allele of Skp1) were targeted through viral-induced gene silencing (VIGS), showing potential contribution to basal resistance against viral infections since their reduction correlated with increased ToCV accumulation. This study provides insights into tomato plants responses to ToCV, with potential implications for developing effective disease control strategies.

Sustainability enhancement is one of the main challenges of aquaculture. Since feeds represent one of the major costs from an environmental point of view, it is priority to find sustainable alterna-tive ingredients for aquaculture diet. Insect meals have some advantages as ingredients for aqua-culture, like its sustainability and nutritional value. However, the biggest drawback of full-fat in-sect meal is its fatty acid profile. The objective of this work was to assess the effects of partial plant or marine-derived ingredients replacements with full-fat Tenebrio molitor meal (TM) at two differ-ent levels on growth performance and fatty acids profiles of Solea senegalensis. For this purpose, a control diet and four experimental diets were tested, two of them contained 5 and 10% w/w TM that replaced mostly fish meal. Two other experimental diets included 10 and 15% w/w TM that replaced mostly plant meals. The inclusion of insect meal resulted in an improvement in growth rate and feed efficiency in both cases. Moreover, dietary inclusion of insect meal increased muscle total protein and decreased total lipid, without changes in phospholipids, and maintaining the relative level of n-3 PUFA. In conclusion, our study demonstrated that full-fat TM inclusion up to 15% in S. senegalensis diets had no negative effects or even positive effects on fish survival, growth performance, nutrient utilization and flesh quality.

Cleidocranial dysplasia (CCD) is an autosomal dominant skeletal dysplasia characterized by persistent open skull sutures whit bulging calvaria, hypoplasia or aplasia of clavicles permitting abnormal opposition of the shoulders, wide public symphysis, short middle phalanx of the fifth fingers and vertebral, craniofacial and dental anomalies. It is a rare disease, with a prevalence of 1-9/1,000,000, high penetrance, and variable expression. The responsible gene of CCD is the runt-related transcription factor 2 gene (RUNX2). We characterize the clinical, genetic and bioinformatic results of four CCD cases. Two Mexican familial with 6 affected members, 9 asymptomatic individuals, and two sporadic cases with CCD, as well as 100 healthy controls. Genomic DNA analyses of the RUNX2 gene was performed for Sanger sequencing. Bioinformatics tools, used to predict the function, stability, and structural changes of the mutated RUNX2 proteins. Three novel heterozygous mutations (c.651_652del; c.538_539delinsCA; c.662T>A) and a previously reported mutation (c.674G>A) were detected. In silico analysis showed that all mutations had functional, stability, and structural alterations in RUNX2 protein. Our results show novel mutations that enrich the pool of RUNX2 gene mutations with CCD. In addition, one patient presented clinical data not previously reported that could represent an expanded phenotype of sever expression.

Healthcare workers (HCW) have been the professional category most exposed to SARS-CoV-2. The pandemic’s impact on HCW was analyzed in terms of COVID-19-related temporary disability (TD) between February 15 2020 and May 1 2021. TDs in HCW for COVID-19 infection or quarantine were described. TD quarantine/infection ratios and TDs per 100,000 affiliated HCW were compared with the cumulative incidence (CI) of COVID-19 cases notified to the National Network of Epidemiological Surveillance. TDs rates by economic activity and occupation were computed. A total of 429,127 TDs were recorded, 36,6% for infection. Three-quarters (76%) were women. The median TD quarantine/infection ratio was 2.5 (Interquartile range [IQR] 1.5-3.9). TDs rates in HCW were always above the CI except for the last two months of the fourth wave. Hospital activities accounted for 84% of TDs and showed the highest TD rate for infection (8,279/100,000). The highest TDs rates were registered among Nursing assistants, Nursing professionals and Physicians: 7,426, 6,925 and 5,508/100,000, respectively. The results demonstrate the high impact of COVID-19 on HCW in Spain and it’s inequalities. They also confirm that TDs represent a complementary source of information for epidemiological and public health surveillance and could provide an early warning of new emerging infections.

After 40 years of the discovery of metallocene catalysts, there are still several aspects that remain unresolved, especially when the “conventional” alkylaluminum activators are not used. Herein, we systematically investigate the synthesis of PE via three different zirconocene catalysts, with different alkyl substituents, activated via different organoboron compounds. The polymerization behavior, as well as the properties of the materials, are evaluated. The results demonstrate that the highest catalytic activity is shown by Bis(cyclopentadienyl)dimethylzirconium activated by trityl tetra(pentafluorophenyl)borate. Also finding that toluene is the optimum solvent for these systems and at these reaction conditions. Moreover, to validate our experimental results, a comprehensive mathematical model is developed on the basis of thermodynamic and kinetic principles. The concentration of ethylene transferred to the solvent phase (toluene) in a liquid-vapor equilibrium (LVE) system is estimated based on the Duhem’s theorem. Arrhenius expressions for the kinetic rate constants of a proposed kinetic mechanism are estimated by a kinetic model, in which the rate of polymerization is fitted by a least-square optimization procedure and the molecular weight averages by the method of moments. The simulations of the coordination polymerization suggest the presence of two types of active sites, principally at low temperatures, and the reactivation of the deactivated sites via a boron-based activator. However, the effect of the temperature on the reactivation step is no clear; a deeper understanding via designed experiments is required.