The process of international migration causes a situation of vulnerability in people's health and greater difficulty in coping with disease. Furthermore, the adversities suffered during migration can trigger reactive signs of stress and cause anxious, depressive, confusional and somatic symptoms. This article studies the relationships between psychosocial risk, psychological distress and somatization in immigrants from 4 communities: Maghrebis, Sub-Saharans, South Americans and South Asian. A cross-sectional study was carried out with questionnaires on 602 immigrants who were surveyed in the Primary Care Centres of an urban area of Catalonia. The instruments used were the Demographic Psychosocial Inventory (DPSI), the Brief Symptom Inventory (BSI) and the Somatic Symptom Inventory (SSI). The average psychosocial risk obtained was 0.35, with the highest values in the sub-Saharan community. Psychological distress showed a mean value of 0.66, with the sub-Saharan community scoring the lowest in all dimensions except depression. The average somatization values were 1.65, with the sub-Saharan community scoring the least. The female gender is a risk factor for somatization and psychological distress. Perceived psychosocial risk is a predictor of psychological distress, but not somatization, suggesting that the use of more adaptive coping strategies could minimize the effect of the migration process on somatizations.

MXenes are two-dimensional nanomaterials isolated from MAX phases by the selective extraction of the A component —a p-block element. The MAX phase exfoliation energy, Eexf, is regarded as a chemical descriptor of the MXene synthesizability. Here we show, by density functional theory estimations of the Eexf values for 486 different MAX phases, that Eexf decreases i) when MAX is a nitride, ii) when going along a d series of the metal M component, iii) when going down a group of the p-block A element, as well as iv) when having thicker MXene phases. Furthermore, Eexf is found to bias, even to govern, the surface chemical activity, as evaluated here on the CO2 adsorption strength, so that more unstable MXenes, displaying larger Eexf values, display a stronger attachment of species upon.

One of the most burning topics in cybersecurity in 2023 will undoubtedly be the compliance with the Software Bill of Materials. Since the US president issued the Executive Order 14028 on Improving the Nation’s Cybersecurity, software developers have prepared and bills are transmitted to vendors, customers, and users, but they don’t know what to do with the reports they are getting. In addition, since software developers have identified the values of the Software Bill of Materials, they have been using the reports extensively. This article presents an estimate of 270 million requests per month, just from form one popular tool to one vulnerability index. This number is expected to double every year and a half. This simple estimate explains the urgency for automating the process. We propose solutions based on artificial intelligence and machine learning, and we base our tools on the existing FAIR principles (Findable, Accessible, Interoperable, and Reusable). This methodology is supported with a case study research and Grounded theory, for categorising data into axis, and for verifying the values of the tools with experts in the field. We showcase how to create, and share Vulnerability Exploitability eXchange data, and automate the Software Bill of Materials compliance process with AI models and a unified computational framework combining solutions for the following problems: (1) the data utilisation problem, (2) the automation and scaling problem, (3) the naming problem, (4) the alignment problem, (5) the pedigree, and provenance problem, and many other problems that are on the top of mind for many security engineers at present. The uptake of these findings will depend on collaborations with government and industry, and on the availability and the ease of use of automated tools.

This retrospective study evaluates the effect of a telemedicine program developed in the central Catalan region in lowering the environmental footprint by reducing the emission of atmospheric pollutants thanks to a reduction in the number of hospital visits involving journeys by road. Between January 2018 and June 2019 a total of 12,322 referrals were made to telemedicine services in the primary care centers, avoiding a total of 9,034 face-to-face visits. In total, the distance saved was 192,682 km, with a total travel time savings of 3,779 hours and a total fuel reduction of 11,754 liters with an associated cost of €15,664. This represents an average reduction of 3,248.3 g of carbon dioxide, 4.05 g of carbon monoxide, 4.86 g of nitric oxide and 3.2 g of sulphur dioxide. This study confirms that telemedicine reduces the environmental impact of atmospheric pollutants emitted by vehicles, reducing the number of journeys made for face-to-face visits and can contribute to environmental sustainability.

Despite the proliferation of Blockchain Metaverse projects, the inclusion of physically disabled individuals in the Metaverse remains distant, with limited standards and regulations in place. However, the article proposes a concept of the Metaverse that leverages emerging technologies, such as Virtual and Augmented Reality, and the Internet of Things, to enable greater engagement of disabled creatives. This approach aims to enhance inclusiveness in the Metaverse landscape. Based on the findings, the paper concludes that the active involvement of physically disabled individuals in the design and development of Metaverse platforms is crucial for promoting inclusivity. The proposed framework for accessibility and inclusiveness in Virtual, Augmented, and Mixed realities of decentralised Metaverses provides a basis for the meaningful participation of disabled creatives. The article emphasises the importance of addressing the mechanisms for art production by individuals with disabilities in the emerging Metaverse landscape. Additionally, it highlights the need for further research and collaboration to establish standards and regulations that facilitate the inclusion of physically disabled individuals in Metaverse projects.

Through the process of paradigm change (water as a resource towards water as a common), the authors examine, from a theoretic point of view, the water governability proposed by Agenda del Agua Cochabamba (AdA) – Cochabamba Water Agenda – in the Cochabamba Valley (Bolivia), identifying barriers and drivers to the process that could take place. The rise of Evo Morales in Government in 2006 suggested that policy making would somehow take a fundamental turn resulting in more poor environmental-oriented water policies. However, if that was indeed the case, the implementation of these policies remain controversial as strong power asymmetries still exist at a local level that interfere with national policies shaping the political area. The Cochabamba Water Agenda echoes this debate on the political arena and contributes a politically contested water management through a paradigm change envisaging the difficulties through its implementation. The question remains if this “political” solution to paradigm change in water management may reduce water conflicts.

This article conducts a literature review of current and future challenges in the use of artificial intelligence (AI) in cyber physical systems. The literature review is focused on identifying a conceptual framework for increasing resilience with AI through automation supporting both, a technical and human level. The methodology applied resembled a literature review and taxonomic analysis of complex internet of things (IoT) interconnected and coupled cyber physical systems. There is an increased attention on propositions on models, infrastructures and frameworks of IoT in both academic and technical papers. These reports and publications frequently represent a juxtaposition of other related systems and technologies (e.g. Industrial Internet of Things, Cyber Physical Systems, Industry 4.0 etc.). We review academic and industry papers published between 2010 and 2020. The results determine a new hierarchical cascading conceptual framework for analysing the evolution of AI decision-making in cyber physical systems. We argue that such evolution is inevitable and autonomous because of the increased integration of connected devices (IoT) in cyber physical systems. To support this argument, taxonomic methodol- ogy is adapted and applied for transparency and justifications of concepts selection decisions through building summary maps that are applied for designing the hierarchical cascading conceptual framework.

Digital technologies have changed the way supply chain operations are structured. In this article, we conduct systematic syntheses of literature on the impact of new technologies on supply chains and the related cyber risks. A taxonomic/cladistic approach is used for the evaluations of progress in the area of supply chain integration in the Industrial Internet of Things and Industry 4.0, with a specific focus on the mitigation of cyber risks. An analytical framework is presented, based on a critical assessment with respect to issues related to new types of cyber risk and the integration of supply chains with new technologies. This paper identifies a dynamic and self-adapting supply chain system supported with Artificial Intelligence and Machine Learning (AI/ML) and real-time intelligence for predictive cyber risk analytics. The system is integrated into a cognition engine that enables predictive cyber risk analytics with real-time intelligence from IoT networks at the edge. This enhances capacities and assist in the creation of a comprehensive understanding of the opportunities and threats that arise when edge computing nodes are deployed, and when AI/ML technologies are migrated to the periphery of IoT networks.

Background: the primary care service in Catalonia has operated an asynchronous teleconsulting service between GPs and patients since 2015 (eConsulta), which has generated some 500,000 messages. New developments in big data analysis tools, particularly those involving natural language, can be used to accurately and systematically evaluate the impact of the service. Objective: the study was intended to examine the predictive potential of eConsulta messages through different combinations of vector representation of text and machine learning algorithms and to evaluate their performance. Methodology: 20 machine learning algorithms (based on 5 types of algorithms and 4 text representation techniques)were trained using a sample of 3,559 messages (169,102 words) corresponding to 2,268 teleconsultations (1.57 messages per teleconsultation) in order to predict the three variables of interest (avoiding the need for a face-to-face visit, increased demand and type of use of the teleconsultation). The performance of the various combinations was measured in terms of precision, sensitivity, F-value and the ROC curve. Results: the best-trained algorithms are generally effective, proving themselves to be more robust when approximating the two binary variables "avoiding the need of a face-to-face visit" and "increased demand" (precision = 0.98 and 0.97, respectively) rather than the variable "type of query"(precision = 0.48). Conclusion: to the best of our knowledge, this study is the first to investigate a machine learning strategy for text classification using primary care teleconsultation datasets. The study illustrates the possible capacities of text analysis using artificial intelligence. The development of a robust text classification tool could be feasible by validating it with more data, making it potentially more useful for decision support for health professionals.

Background: Telemedicine (interconsultation between primary and hospital care teams) has been operating in the counties of Central Catalonia Bages, Moianès and Berguedà since 2011 in the specialties of teledermatology, teleulcers, teleeyelids and teleaudiometries. For the period until the end of 2019, a total of 52,198 visits have been recorded. Objective: To analyse the differential costs between telemedicine and usual care in a semi-urban environment. Methodology: A cost-minimization evaluation, including direct and indirect costs from a societal perspective, distinguishing healthcare and user’s costs, within a three-month period. Results: Telemedicine saved € 780,397 over the period analysed. A differential cost favourable to telemedicine of about € 15/visit has been observed, the patient being the largest beneficiary of this saving (by 85%) in terms of shorter waiting times and travel costs. From the healthcare system perspective, moving the time spent in a hospital care consultation to primary care is efficient in terms of the total time devoted per patient. In social terms and in this context, telemedicine is more efficient than usual care. Conclusion: Users’ saving of time in terms of consultation and travel is the main driver of interconsultation between primary and hospital care savings in a semi-urban context. The telemedicine service is also economically favourable for the healthcare system, enabling it to provide a more agile service, which also benefits the healthcare professionals.

The use of video in education has become ubiquitous as technological developments have markedly improved the ability and facility to create, deliver and view videos. The concomitant pedagogical transformation has created a sense of urgency regarding how video may be used to advance learning. Initial reviews have suggested only limited potential for the use of video in higher education. More recently, a systematic review of studies on the effect of video use on learning in higher education, published in the prestigious Review of Educational Research, found, overall, effects to be positive. In the present paper we critique this study and provide some needed clarity to the state of research on learning via video in higher education. We reveal significant gaps in the study methodology and write-up and use a cognitive processing lens to critically assess and reanalyse study data. We found results of this study to be only applicable to learning requiring lower-level cognitive processing and conclude, consistent with prior research, learning benefits remain limited.

The performance of Integrated Multisatellite Retrievals for GPM (V06B-IMERG) is evaluated at subdaily and daily scale using 10 years of heavy precipitation over a region in the Western Med-iterranean for different temporal aggregations with a dense network of rain gauges. On a half-hourly scale, the contribution of passive microwave (PMW) and infrared (IR) sources in the satellite estimates was considered, as well as the relation of various microphysical properties of cloud tops using Cloud Microphysics (CMIC- NWC SAF) data. IMERG shows a marked tendency to underestimate precipitation compared to rain gauges as the rainfall intensity threshold and temporal resolution increases. Results indicate that the negative bias is weaker when retrievals are due to PMW data. On the other hand, the benefits of filling the PMW gaps of IMERG by including IR information come at the expense of increasing the bias. IMERG performs dramatically better in the presence of precipitating ice clouds compared to warm and mixed phase clouds, which seems to be related with microphysical properties such as cloud optical thickness and cloud top effective radius. This work contributes to the understanding of the factors affecting satellite estimates of extreme precipitation and their relationship with the microphysical characteristics of clouds, which generates added value for further downstream applications and users’ decision making.

The study aims to explain the different effects between the multiplication, addition, division and subtraction equations. In this sense, multiplication and addition equations develop a new element or fact, meanwhile, division equations express information within the element or fact, subtraction is the selection of element or fact. Furthermore, for a multiplication and addition equation results in the new element or fact, it is necessary to depend on specific physical concepts, without extreme alteration, as it would result in the alteration of the element or fact. It is worth highlighting the importance of fixed values ​​in the equation to describe the specific nature of the element or fact. The study makes it possible to understand open equations (without solutions) in mathematics and physics, in addition to understanding existing equations. The study makes reference to the theory of obligatory necessity and the theory of differences between elements.

The classical Rotational Isomeric State (RIS) model, originally proposed by Flory, has been used to rationalize a wide range of physicochemical properties of neutral polymers. However, many weak polyelectrolytes of interest are able to regulate their charge depending on the conformational state of the bonds. Recently, it has been shown that the RIS model can be coupled with the Site Binding (SB) model, for which the ionizable sites can adopt two states: protonated or deprotonated. The resulting combined scheme, the SBRIS model, allows to analyse ionization and conformational equilibria on the same foot. In the present work this approach is extended to include pH-dependent electrostatic Long Range (LR) interactions, ubiquitous in weak polyelectrolytes at moderate and low ionic strengths. With this aim the original LR interactions are taken into account by defining effective Short Range (SR) and pH-dependent parameters, such as effective microscopic protonation constants and rotational bond energies. The new parameters are systematically calculated using variational methods. The machinery of statistical mechanics for SR interactions, including the powerful and fast transfer matrix methods, can then be applied. The resulting technique, to which we will refer as Local Effective Interaction Parameters (LEIP) method, is illustrated with a minimal model of a flexible linear polyelectrolyte containing only one type of rotating bonds. LEIP reproduces very well the pH dependence of the degree of protonation and bond probabilities obtained by semi-grand canonical Monte Carlo simulations, where LR interactions are taken explicitly into account. The reduction in the computational time in several orders of magnitude suggests that the LEIP technique could be useful in a range of areas involving linear weak polyelectrolytes, allowing direct fitting of the relevant physical parameters to the experimental quantities.

The study presents an assertion and explanation that major and minor numerical progressions occur that depend on the representation contained in physical space. In general cases, larger numbers are multiples and smaller numbers are simple, because multiple numbers contain more numbers in many physical spaces than simple numbers. In specific cases, they depend on the statement of what the specific representation is, and different realities from general cases may occur. Also, the theory explains the change in the number of prime numbers.

The theory says that the first things to exist in the universe and the current moment were driven by an imperative need; that is, the intensities of the physical concept specify influence the existence of elements and facts based on the countless observations in physical spaces in relation to elements and facts. The existence of mandatory elements in space is motivated by the characteristics of the spaces that offer conditions for such an obligation. The theory states that the universe did not arise by chance; that is, the universe emerged through determination influenced by its surroundings. The objective of the study is to help explain the elements and facts of the universe from its origins to the present.

Obesity is one of the main causes of morbidity and mortality, and food addiction has been considered one of its phenotypes. The study aims to determine the effectiveness of physical activity (PA), exercise, and sedentary behaviour management in attenuating food addiction in obese and overweight healthy adults. A search strategy was undertaken using MEDLINE, CENTRAL, PsycINFO, and CINAHL until April 2019. A total of 295 studies were found from which seven studies, after duplicates were removed, were included. The acute effect of PA of moderate intensity had an effect on attentional bias, craving, and sweet taste perception, although no difference was observed between genders and body mass index groups. No effect was observed on the hedonic and reward value. The acute effects of PA of moderate intensity may be a useful tool to control the levels of food addiction. More research is needed to clarify if this effect also occurs during chronic application, at different doses and types of PA, and for all populations.

Two mononuclear Ru(III) complexes of formula trans-[RuCl4(Hgua)(dmso)]·2H2O (1) and trans-[RuCl4(Hgua)(gua)]·3H2O (2) [Hgua = protonated guanine (gua), dmso = dimethyl sulfoxide] have been synthesized and characterized magnetostructurally. Compounds 1 and 2 crystallize in the monoclinic system with space groups P21/n and Pc, respectively. Each Ru(III) ion in 1 and 2 is six-coordinate and bonded to four chloride ions and one (1) or two (2) nitrogen atoms from guanine molecules and one sulfur atom (1) of a dmso solvent molecule, generating quasi regular octahedral geometries in both cases. In their crystal packing, the Ru(III) complexes are self-assembled mainly through an extended network of N-H⋯Cl hydrogen bonds and π⋯Cl type intermolecular interactions, forming novel supramolecular structures based on this paramagnetic 4d metal ion. Variable-temperature dc magnetic susceptibility measurements performed on microcrystalline samples of 1 and 2 show a different magnetic behavior. While 1 is a ferromagnetic compound at low temperature, 2 exhibits a behavior typical of noninteracting mononuclear Ru(III) complexes with S = 1/2. Ac magnetic susceptibility measurements reveal slow relaxation of the magnetization in the presence of external dc fields only for 2, hence indicating the occurrence of field-induced single-ion magnet (SIM) phenomenon in this mononuclear guanine-based Ru(III) complex.

In this paper, we analyze data from the 2012 Encuesta de Integración Social y Salud (Social Integration and Health Survey) of the Instituto Nacional de Estadística (Spanish National Institute of Statistics) to obtain profiles created by combining disability, poverty and social exclusion. We hypothesize that the probability that people will experience social exclusion increases if they have a disability, chronic illness or limitation in conducting everyday activities, and that this probability is greater for women than for men. To conduct our analysis, we constructed a social exclusion model based on a series of social determinants that acts as a dependent variable. In this context, social exclusion is understood to go beyond the concept of financial poverty. We performed bivariate analyses, in which we calculated the Odds Ratios (OR) for certain variables considered to be predictors of social exclusion. We also performed a means comparison test and an ANOVA test to observe differences between individuals with recognized disability and those without. Finally, we conducted logistic regression analysis to determine which vulnerability profiles are most likely to experience a situation of social exclusion. We also discuss the limitations of our study, and suggest areas in, which the relationships between health, social exclusion and disability can be further investigated.

The Theory of differences between elements explains the reasons for the differences in physical concepts between different elements, such as quantum physics and the Theory of general relativity, being explained through observations. Thus, it is possible to conclude from the observations that the differences are motivated by the reactions between the elements, by the composition of the elements, and by the influence of the spaces that promote losses and gains of characteristics; therefore, there is no general similarity between quantum physics and the general Theory of relativity. The study aims to understand the elements and their physical concepts that make up the Universe.

Background: Telemedicine is both effective and can provide efficient care at lower costs. It also enjoys a high acceptance rate among users. The Technology Acceptance Model proposed is based on the two main concepts of ease of use and perceived usefulness and comprises three dimensions: the individual context, the technological context and the implementation or organizational context. There is not a short and validated questionnaire to check the acceptance of telemedicine services amongst health care professionals using a technology acceptance model. Objective To translate and validate a telemedicine acceptance questionnaire based in the technology acceptance model. Methods The study included the following phases: adaptation and translation of the questionnaire into Catalan and psychometric validation which include construct (exploratory factor analysis), consistency (Cronbach’s alpha) and stability (test-retest). Factor analysis was used to describe variability amongst observed variables. Results After removing incomplete responses 144 responses where considered for analysis. The internal consistency measured with the Cronbach’s alpha coefficient was good with an alpha coefficient of 0.84 (95%, CI: 0.79-0.84). The intraclass correlation coefficient was 0.93 (95% CI: 0.852-0.964). The Kaiser-Meyer-Olkin test of sampling was adequate (KMO = 0.818) and the Bartlett test of sphericity was significant (Chi-square 424.188; gl=28; P < .001), indicating that the items were appropriate for a factor analysis. Conclusions The questionnaire validated with this study has robust statistical features that make it a good predictive model of professional’s satisfaction with telemedicine programs.

Probiotics are suggested to improve pig health, nutrient utilisation, performance, and may reduce nitrogen (N) pollution. However, the effectivity of a single-strain might be different from a multi-strain. The study was conducted to investigate the effect of a novel Bacillus multi-strain on nutrient digestibility, energy utilisation, and N retention in weaned piglets. The experiment consisted of a control diet (CD) and a supplemented diet (SD). The probiotic used for SD consisted of B. amyloliquefaciens - 516 and B. subtilis - 541. A total of 8 boars/ treatment were weaned (day 0; 8.5 kg bodyweight). Until day 10, piglets were fed ad libitum and were housed in pairs; from day 11, piglets were fed semi ad libitum and were housed individually. From day 14, faecal and urine were collected twice daily. Piglets were humanely euthanised at day 19 (15.0 kg bodyweight) after which the jejunum, ileum, and colon content were collected. In faeces the apparent total tract digestibility (ATTD) of, amongst others, DM, organic matter (OM), crude protein (CP), non-starch polysaccharides (NSP), and subsequently net energy (NE) were calculated using titanium dioxide as an indigestible marker. In jejunum and ileum, the apparent digestibility of CP was estimated and in ileum the apparent AA digestibility. In urine, N content was measured to determine N retention. The volatile fatty acid (VFA), branched-chain fatty acid (BCFA), and lactic acid content were analysed in colon and faeces. Apparent CP digestibility in jejunum and ileum were not affected by treatment (P&gt;0.05) and no effect was observed on apparent ileal digestibility of AA (P&gt;0.05). Supplementation with the multi-strain probiotic improved ATTD of DM (P=0.01; +1.3%) and OM (P=0.02; +1.2%) and tended to improved ATTD of CP (P=0.10; +2.2%) and NSP (P=0.07; +1.9%). The multi-strain probiotic also improved the NE value (P=0.02; +0.2 MJ/kg DM) and improved N retention (P=0.05; +1.6%). Supplementation did not influence VFA, BCFA, and lactic acid content in the faeces (P&gt;0.05). However, in colon, supplementation did influence lactic acid content (lower; P=0.01) and tended to influence valeric acid content (higher; P=0.09). In conclusion, results from the current study suggests that the multi-strain probiotic has the potential to contribute to improve nutrient efficiency in weaned piglets. More research needs to be done to identify the impact of the improved nutrient utilization on gut health in post-weaned pigs as well as environmental pollution.

This work addresses the role of charge regulation (CR) and the associated fluctuations in the conformational and mechanical properties of weak polyelectrolytes. Due to CR, changes in the pH-value modifies the average macromolecular charge and conformational equilibria. A second effect is that, for a given average charge per site, fluctuations can alter the intensity of the interactions by means of correlation between binding sites. We investigate both effects by means of Monte Carlo simulations at constant pH-value, so that the charge is a fluctuating quantity. Once the average charge per site is available, we turn off the fluctuations by assigning the same average charge to every site. A constant charge MC simulation is then performed. We make use of a model which accounts for the main fundamental aspects of a linear flexible polyelectrolyte i.e. proton binding, angle internal rotation, bond stretching and bending. Steric excluded volume and differentiated treatment for short-range and long-range interactions are also included in the model. It can be regarded as a kind of "minimal'' model in the sense that contains a minimum number of parameters but still preserving the atomistic detail. It is shown that, if fluctuations are activated, gauche state bond probabilities increase, and the persistence length decreases, so that the polymer becomes more folded. Macromolecular stretching is also analyzed in presence of CR (the charge depends on the applied force) and without CR (the charge is fixed to the value at zero force). The analysis of the low force scaling behavior concludes that Pincus exponent becomes pH-dependent. Both with and without CR, a transition from 1/2 at high pH-values (phantom chain) to 3/5 to low pH-values (Pincus regime), is observed. Finally, the intermediate force stretching regime is investigated. It is found that CR induces a moderate influence in the force-extension curves and persistence length (which in this force regime becomes force-dependent). It is thus concluded that the effect of CR on the stretching curves is mainly due to changes in the average charge at zero force. It is also found that, for the cases studied, the effect of steric excluded volume is almost irrelevant compared to electrostatic interactions.

This study aimed to analyze the responsiveness of the 5STS test among stroke patients and to estimate the MCIDs for different severity levels of community ambulation and stages of recovery. The 5STS and comparator instruments [gait speed and Functional Ambulatory Category (FAC)] were evaluated at baseline. These measures were repeated at 4 (Stage 1) and 8 weeks (Stage 2), together with the Global Rating of Change (GROC). The MCIDs were calculated with two anchor-based methods using the GROC as the external criterion. Responsiveness to change for the 5STS was estimated analyzing the correlation with changes in the two comparator instruments and their capacity to discriminate improvement. For the 5STS test, while the MCIDs of the limited community ambulators were similar in the two stages (around 3 s), those of the household ambulators decreased from 1.9 s to 0.72 s. Spearman's rho coefficients showed an acceptable correlation between changes in 5STS and changes for both the FAC and gait speed changes in both stages of recovery. Our study revealed that the 5STS is responsive to functional changes in patients with stroke and that their degree of severity and stage of recovery influence the MCID values of the 5STS.

The world is currently experiencing the fourth industrial revolution driven by the newest wave of digitisation in the manufacturing sector. The term Industry 4.0 (I4.0) represents at the same time: a paradigm shift in industrial production, a generic designation for sets of strategic initiatives to boost national industries, a technical term to relate to new emerging business assets, processes and services, and a brand to mark a very particular historical and social period. I4.0 is also referred to as Industrie 4.0 the New Industrial France, the Industrial Internet, the Fourth Industrial Revolution and the digital economy. These terms are used interchangeably in this text. The aim of this article is to discuss major developments in this space in relation to the integration of new developments of IoT and cyber physical systems in the digital economy, to better understand cyber risks and economic value and risk impact. The objective of the paper is to map the current evolution and its associated cyber risks for the digital economy sector and to discuss the future developments in the Industrial Internet of Things and Industry 4.0.

Inertial focusing conditions of fluorescent polystyrene spherical particles are studied at the pointwise level along their pathlines. This is accomplished by an algorithm that calculates a de-gree of spreading function of the particles' trajectories taking streaklines images as raw data. Different confinement ratios of the particles and flow rates are studied and the results are pre-sented in state diagrams showing the focusing degree of the particles in terms of their position within a curve of an asymmetric serpentine and the applied flow rate. In addition, together with numerical simulation results, we present empirical evidence that the preferred trajectories of inertially focused spheres are contained within Dean vortices' centerlines. We speculate about the existence of a new force, never postulated before, to explain this fact.

The dynamics of a spherical particle in an asymmetric serpentine is studied by finite element method (FEM) simulations in a physically unconstrained system. The two-way coupled time dependent solutions illustrate the path of the particle along a curve where a secondary flow (Dean flow) has developed. The simulated conditions were adjusted to match those of an experiment for which particles were focused under inertial focusing conditions. The obtained rotational modes allowed to infer the influence of the local flow around the particle. We propose a new approach to find the decoupled secondary flow contribution employing a quasi-Stokes flow.

Forecasting streamflow accurately is essential to achieve an efficient integrated water resources management strategy and provide consistent support to water decision-makers. We present a simple, low-cost and robust approach for forecasting monthly and yearly streamflow during the hydrological year in course, applicable to headwater catchments. It combines the use of regression analysis techniques, the two-parameter Gamma continuous cumulative probability distribution function and the Monte Carlo method. It is based on a probabilistic comparison of the progression of the current hydrological year with the historic observed series. The methodology has been successfully applied to two headwater reservoirs within the Guadalquivir River Basin in southern Spain. The root-mean-square error and correlation coefficient were used to measure the accuracy of the model and the results showed good levels of reliability. The outputs are the probabilistic monthly and yearly streamflow and 80% confidence interval. Further reductions in prediction errors may be achieved from increasing the number of observed years. These risk-based predictions are of great value, especially, before the intensive irrigation campaign starts (usually in April), when Water Authorities are to take responsible management decisions about the best allocation of the available water volume between the different water users and environmental needs.

This article presents an in-depth review of Virtual Power Plant (VPP), its organization in the energy system and its prospects in the face of the promising future of the increasing bidirectional complexity exposed in the current scenario. A new paradigm for the operations of modern power distribution and transmission systems requires greater grid flexibility that is accompanying an extensive change in the structure of electricity markets, the fruit of the development of the renewable industry and of the growing photovoltaic systems popularized, but in contrast due to the intermittent nature cause variable uncertainties in the power system. Innovative concepts like VPP are becoming a reality, establishing an efficient and effective mechanism. The objectives and components are described in a comprehensive way, and some of the most important are pointed out and presented in detail to contribute with a description of the energy systems and the implicit research needed for sustainability and resilience in the eminent energy scenario with this technology. In addition, the literature and studies of this technology already indicate a direction of this new tool as a promising solution to manage the uncertainties of the renewable energies.

Retailers must have accurate sales forecasts to operate their businesses efficiently and effectively and to remain competitive in the marketplace. Global forecasting models like RNNs can be a powerful tool for forecasting in retail settings, where multiple time series are often interrelated and influenced by a variety of external factors. By including covariates in a forecasting model, we can better capture the various factors that can influence sales in a retail setting. This can help improve the accuracy of our forecasts and enable better decision-making for inventory management, purchasing, and other operational decisions. In this study we investigate how the accuracy of global forecasting models is affected by the inclusion of different potential demand covariates. To ensure the significance of the study's findings, we used the M5 forecasting competition's openly accessible and well-established dataset. The results obtained from the DeepAR models, which were trained on various combinations of features including time, price, events, and IDs, suggest that individually only the features corresponding to IDs improve the baseline model. However, when all the features are used together, the best performance is achieved, indicating that the individual relevance of each feature is emphasized when the information is given jointly. Comparing the model with features to the model without features, there is an improvement of 1.76\% for MRMSSE and 6.47\% for MMASE.

Background: Hospital accreditation has become ubiquitous in developing countries. Although studies recognize that accreditation can improve healthcare quality, efficiency, and safety, there are doubts about how hospitals deal with conflicts caused by the different institutional logics that inhabit this process. Therefore, this study aimed to investigate how professional and market logics, as well as the conflict between institutional demands, affect compliance with hospital accreditation. Methods: To this end, we developed a multiple case study in four Brazilian hospitals through in-depth interviews with sixteen participants (managers, physicians, nurses, physiotherapist) and on-site observation by the triangulation between the analysis of the narratives and the results of the multiple correspondence analysis. The interpretation and subsequent categorization of the interviews were guided by the study's analytical categories: institutional logics (professional and market); adoption objectives (legitimacy and efficiency); strategic responses to adoption (conformity, non-conformity, and customization); nature of demands (origin in the means and in goal). Results. The data showed that when professional logic is prominent, there is a greater tendency to customize activities, as there are conflicts in the means by which activities can be developed. When market logic stands out, there is a risk of non-conformity, mainly because the focus falls exclusively on goals. Finally, the data point to the absence of conflicts between justifications related to efficiency and legitimacy. Conclusion. We conclude the study by highlighting the theoretical and practical implications of recognizing the conflict between logics, contributing to a deeper understanding of how logic influences the attention given to specific demands and, more significantly, how they affect compliance with hospital accreditation standards, expanding the body of knowledge in the area.

Recent advancements in artificial intelligence (AI) and deep learning have revolutionized the field of protein engineering, particularly in the area of de novo protein design. This review article explores the impact of AI-driven approaches on protein design, with a specific focus on the role of structure prediction neural networks, such as AlphaFold and RoseTTAFold. The article discusses the paradigm shift brought about by these networks, which have enabled the design of proteins with unique structures and functions that are not found in nature. The review covers various aspects of AI-driven protein design, including the use of protein language models to harness evolutionary information, the development of de novo protein design workflows utilizing deep learning, and the application of generative models like RFdiffusion and RoseTTAFold All-Atom. The article also highlights the successes and applications of AI-driven protein design across diverse domains, such as enzyme engineering, antibody design, and vaccine development. Additionally, the review identifies current challenges and future directions in the field, emphasizing the need to address limitations in modeling conformational dynamics and designing proteins for in vivo functionality. The article concludes by underscoring the potential of AI-driven protein design to transform various aspects of science and technology, while also acknowledging the importance of interdisciplinary collaboration and the development of robust pipelines for the validation and optimization of designed proteins. Overall, this comprehensive review serves as a valuable resource for researchers and practitioners interested in understanding the current state and future prospects of AI-driven protein design.

Digital technologies have changed the way supply chain operations are structured. In this article, we conduct systematic syntheses of literature on the impact of new technologies on supply chains and the related cyber risks. A taxonomic/cladistic approach is used for the evaluations of progress in the area of supply chain integration in the Industrial Internet of Things and Industry 4.0, with a specific focus on the mitigation of cyber risks. An analytical framework is presented, based on a critical assessment with respect to issues related to new types of cyber risk and the integration of supply chains with new technologies. This paper identifies a dynamic and self-adapting supply chain system supported with Artificial Intelligence and Machine Learning (AI/ML) and real-time intelligence for predictive cyber risk analytics. The system is integrated into a cognition engine that enables predictive cyber risk analytics with real-time intelligence from IoT networks at the edge. This enhances capacities and assist in the creation of a comprehensive understanding of the opportunities and threats that arise when edge computing nodes are deployed, and when AI/ML technologies are migrated to the periphery of IoT networks.

This paper is focused on mapping the current evolution of Internet of Things (IoT) and its associated cyber risks for the Industry 4.0 (I4.0) sector. We report the results of a qualitative empirical study that correlates academic literature with 14 - I4.0 frameworks and initiatives. We apply the grounded theory approach to synthesise the findings from our literature review, to compare the cyber security frameworks and cyber security quantitative impact assessment models, with the world leading I4.0 technological trends. From the findings, we build a new impact assessment model of IoT cyber risk in Industry 4.0. We therefore advance the efforts of integrating standards and governance into Industry 4.0 and offer a better understanding of economics impact assessment models for I4.0.

This paper presents a numerical study on the vertical (axial) and lateral (flexure) behavior of CFST (Concrete-Filled Steel Tube) columns with active hoop prestress; this transverse prestressing effect is achieved by bolting together two steel half-tubes. This study refers to new construction only (i.e., no retrofit). 12 prototype CFST column specimens (segments) are analyzed. These specimens differ in the prestressing force (3 levels) and in the gravity loading ratio (4 levels); they are selected to represent typical ground columns of mid-rise buildings. The structural behavior of these column specimens is simulated with a nonlinear model implemented in Abaqus; the concrete and steel behavior are described with a damage-plasticity and a plasticity model, respectively. Finally, the interface concrete-steel interaction is represented by a hard (compression-only) surface-to-surface contact model. The calculations involve three consecutive loading steps: (i) transverse prestress, (ii) axial force, and (iii) lateral loading (shear force and bending moment). The structural behavior of the CFST columns is deeply examined and discussed; the results show that their axial-flexural capacity is adequate. Noticeably, it is concluded that the overall benefits of prestressing the columns are only modest. Preliminary studies on the aforementioned mid-rise buildings equipped with the CFST columns show that their gravity and wind capacities are largely enough; conversely, their seismic capacity is sufficient for moderate seismic ground motions only.

Barley straw was used to reinforce PHB in a discontinuous semi-industrial process. Four different fibres were used as reinforcing material : sawdust (SW), defibred (DFBF), delignified (DBF) and bleached (BBF) fibres. Looking at the mechanical properties, onlythe elastic moduli (Et) revealed an improvement. Oppositely, the strengths at break, under both tensile and bending assays, tended to decrease, evidencing a poor affinity between both components. Thanks to the mechani-cal treatment applied on the fibre, DFBF appeared as the most promising filler with the mechani-cal properties of the composites closest to those of neat PHB. DFBF-based composites were then produced by means of a process intensification using a twin-screw extruder, and then moulded into flowerpots. Mechanical results showed almost the same properties between the discontinuous and intensification processes. The suitability of the material to be used on agriculture flowerpots was demonstrated by simulation. . PHB-DFBF composite material can be considered an alterna-tive to replace petrol-based products for applications in agriculture and horticulture.

In this paper we present an understanding of cyber risks in the Internet of Things (IoT), we explain why it is important to understand what IoT cyber risks are and how we can use risk assessment and risk management approaches to deal with these challenges. We introduce the most effective ways of doing Risk assessment and Risk Management of IoT risk. As part of our research, we also developed methodologies to assess and manage risk in this emerging environment. This paper will take you through our research and we will explain: what we mean by the IoT; what we mean by risk and risk in the IoT; why risk assessment and risk management are important; the IoT risk management for incident response and recovery; what open questions on IoT risk assessment and risk management remain.

The theory of limited numbers says that the number is not infinite, that is, the number is limited in parts or completely. To reach a conclusion about the limited number, one must understand the meaning of mathematics and varied spaces, therefore, one must understand that mathematics and spaces interact. Mathematics has the function of describing the world precisely, where numbers represent elements or facts that rationally belong to space, and spaces have different intensities of specific physical concepts in each space; therefore, there is no infinite element or fact due to differences in the intensities of specific physical concepts in spaces that do not allow for the fact or fact in all spaces.

The theory says that number interacts with spaces based on the meaning of mathematics, this way it is possible to obtain numerical knowledge. The theory shows the possibility of using spaces relating to each other to explain the reasons why two even numbers form a pair, two odd numbers form a pair, an even and an odd number form an odd number, three odd numbers form an odd number, three even numbers form an odd number. one even, one odd and two evens form an odd, two odd and one even form a pair.

The main objective of this study was to study the effect of occupational stress on turnover intentions, as well as whether this relationship is mediated by burnout levels and moderated by motivation. The sample of this study consisted of 603 participants, all employees of the Portuguese Tax and Customs Authority, which is part of the Ministry of Finance and belongs to the Direct State Administration. The results indicate that occupational stress (with managers, with career and remuneration and with work overload) has a positive and significant effect on turnover intentions and that this relationship is mediated by burnout. Motivation (intrinsic and identified) has a negative and significant effect on turnover intentions. Intrinsic motivation moderates the rela-tionship between occupational stress (with managers, with colleagues, with career and pay and with family problems) and turnover intentions. These results indicate that among the dimensions of occupational stress, the most critical are stress with managers, work overload and career and pay. These are factors that the Direct State Administration should be concerned about in trying to minimize their causes.

Mixtures of methacrylic polymers are the most common materials for making composites to be used as resins for dental and cosmetic applications. Some of these mixtures are composed by poly (ethyl methacrylate) (PEMA) and poly (methyl methacrylate) (PMMA), which constitute a solid component to be mixed with a liquid component made out of methacrylate monomers. The reaction between the thermal initiator benzoyl peroxyde (BPO) present in the solid component and the activator of the polymerization process, N,N-dimethyl-p-toluidine (DMT) present in the liquid component, gives rise to thermoset materials. In the present study, different liquid formulations composed by a mixture of two methacrylic monomers, ethyl methacrylate (EMA) and triethylene glycol dimethacrylate (TEGDMA) for cosmetic applications, were prepared and characterized, using a commercial powder (POW) composed by PEMA and PMMA. With the aim of improving workability during final application of the material, it was necessary to slow down the polymerization rate of liquid formulations. Their thermal behaviour was investigated by DSC in order to check the polymerization rate. Thermal stability of final materials was determined by TGA. DMTA, microindentation hardness and impact tests were performed on final materials, to assess their performance with respect to standard formulation. The combination of thermal and mechanical properties allows choosing which formulations could be suitable for use in cosmetics.

Climate change is expected to influence cooling and heating energy demand of residential buildings and affect overall thermal comfort. Towards this end, the heating degree-day (HDD), the cooling degree-day (CDD) and the HDD+CDD were computed from an ensemble of 7 high-resolution bias-corrected simulations attained from EURO-CORDEX under RCP4.5 and RCP8.5. These three indicators were analyzed for 1971-2000 (from E-OBS) and 2011-2040 and 2041-2070, under both RCPs. Results show that the overall spatial distribution of HDD trends for the 3 time-periods points out an increase of energy demand to heat internal environments in Portugal's northern-eastern regions, most significant under RCP8.5. It is projected an increase of CDD values for both scenarios; however, statistically significant linear trends were only found for 2041-2070 under RCP4.5. The need for cooling is almost negligible for the remaining periods, though linear trend values are still considerably higher for 2041-2070 under RCP8.5. By the end of 2070, higher amplitudes for all indicators are depicted for southern Algarve and Alentejo regions, mainly under RCP8.5. For 2041-2070 the Centre and Alentejo (North and Centre) regions present major positive differences for HDD(CDD) under RCP4.5(RCP8.5), within the 5 NUTS II regions predicting higher heating(cooling) requirements for some locations.

In a context of increasingly necessary energy transition, precise modelling of profiles for low-voltage (LV) network consumers is crucial to enhance hosting capacity. Typically, load curves for these consumers are estimated through measurement campaigns conducted by Distribution System Operators (DSO) for a representative subset of customers or through the aggregation of load curves from household appliances within a residence. With the instrumentation of smart meters becoming more common, a new approach to modelling profiles for residential customers is proposed to make the most of the measurements from these meters. The disaggregation model estimates the load profile of customers on a low-voltage network by disaggregating the load curve measured at the secondary substation level. By utilizing only the maximum power measured by Linky smart meters, along with the load curve of the secondary substation, this model can estimate the daily profile of customers. For 48 secondary substations in our dataset, the model obtained an average symmetric mean average percentage error (SMAPE) error of 4.91% in reconstructing the load curve of the secondary substation from the curves disaggregated by the model. This methodology can allow the estimation of the daily consumption behaviors of the low-voltage customers. In this way, we can safely envision solutions that enhance the grid hosting capacity.

Vaginal ecosystem is a unique environment where, in physiological conditions, lactobacilli dominate. However, also pathogenic microbial species, responsible of vaginitis and vaginosis, can harbor vaginal microbiota. To extend the data published by De Seta and Larsen in Pathogens (2021), here we analyzed both the anti-Candida and anti-inflammatory properties of the vaginal gel formulation, Respecta® Balance Gel (RBG), commercialized as an adjuvant to treat vaginitis and vaginosis. We evaluated its activity by an in vitro model where a monolayer of A-431 vaginal epithelial cells was infected by Candida albicans in the presence of RBG or the placebo formulation (pRBG). Specifically, we tested the RBG capacity to counteract C. albicans virulence factors as well as their anti-inflammatory properties. Our results show that, unlike the placebo, RBG reduces ,reduces, C. albicans adhesion, its capacity to form hyphae and C. albicans-induced vaginal cell damage. Interestingly, both RBG and pRBG reduce LPS-induced IL-8 secretion (being RBG the most effective) demonstrating that also the placebo retains anti-inflammatory properties. By our experimental approach we highlight the possible role of farnesol on such effects, but we would like to point out that lactic acid, polydextrose and glycogen too must be relevant in the actual application. Taken together, our results show that RBG impairs C. albicans virulence and is able to reduce the inflammation in the vaginal environment, ultimately allowing the establishment of a balanced vaginal ecosystem.

We present an updated design process for adapting and integrating existing cyber risk assessment approaches for impact assessment for the risk from IoT to the digital economy. The new design process includes a set of changes to the original standards (e.g. NIST) that are adapted for the IoT cyber risk in this paper. This paper also presents a new framework for impact assessment of IoT cyber risk, specific for the digital economy.

This research article reports the results of a qualitative case study that correlates academic literature with five Industry 4.0 cyber trends, seven cyber risk frameworks and two cyber risk models. While there is a strong interest in industry and academia to standardise existing cyber risk frameworks, models and methodologies, an attempt to combine these approaches has not been done until present. We apply the grounded theory approach to derive with integration criteria for the reviewed frameworks, models and methodologies. Then, we propose a new architecture for the integration of the reviewed frameworks, models and methodologies. We therefore advance the efforts of integrating standards and governance into Industry 4.0 and offer a better understanding of a holistic economic impact assessment model for IoT cyber risk.

Sustainability is pivotal in the urban transformation strategy in order to reach more resource-efficient, resilient and smarter cities. The goal of being a sustainable city should drive the decisions for city interventions. Nonetheless, impacts need to be quantified, lacking of standard and/or common methodologies that could be replicable across multiple cities. There exist many initiatives aiming at defining indicators and assessment procedures, but without convergence in the definition of terms and application methodologies, making complex its real implementation. Within mySMARTLife project (GA#731297), a KPI-driven evaluation framework is defined with the aim of covering the multiple pillars of a city (i.e. energy, mobility, citizens, economy) in a holistic way. This methodology also defines the concepts and terms to guide urban planners and/or experts at time of implementing the framework in a specific city. The evaluation framework has been deployed in the three cities of Nantes, Hamburg and Helsinki and some lessons learnt have been extracted, such as the necessity of providing a definition of measurement boundary to avoid interpretations. Thanks to a co-creation strategy, the main difficulties and issues from the cities have been taken into consideration for increasing the replicability.

Rearing density directly impacts fish welfare, which, in turn, affects productivity in aquaculture. Previous studies have indicated that high-density rearing during sexual development in fish can induce stress, resulting in a tendency towards male-biased sex ratios in the populations. In recent years, research has defined the relevance of the interactions between the environment and epigenetics playing a key role in the final phenotype. However, the underlying epigenetic mechanisms of individuals exposed to confinement remain elucidated. By using zebrafish (Danio rerio) the DNA methylation promotor region and the gene expression patterns of six genes: dnmt1, cyp19a1a, dmrt1, cyp11c1, hsd17b1, and hsd11b2 involved in the DNA maintenance methylation, reproduction, and stress were assessed. Zebrafish larvae were subjected to two high-density conditions (9 and 66 fish/L) during two periods of overlapping sex differentiation of this species (7 to 18 and 18 to 45 days post-fertilization, dpf). Results showed a significant masculinization in the populations of fish subjected to high densities from 18 to 45 dpf. In adulthood the dnmt1 gene was differentially hypomethylated in ovaries and its expression was significantly downregulated in the testes of fish exposed to high-density. Further, the cyp19a1a gene showed downregulation of gene expression in the ovaries of fish subjected to elevated density, as previously observed in other studies. We proposed dnmt1 as a potential testicular epimarker, and the expression of ovarian cyp19a1a as a potential biomarker for predicting stress originated from high densities during the early stages of development. These findings highlight the importance of rearing densities by long-lasting effects in adulthood conveying cautions for stocking protocols in fish hatcheries.

Socially Responsible Investments, also referred to as ethical or sustainable investments, have experienced rapid global growth in recent years. They represent an investment approach that incorporates social, environmental, and ethical considerations into decision-making processes. Consequently, the significance of SRIs has captured the attention of academics, prompting inquiries into the impact of integrating social criteria on portfolio performance. The primary objective of this work was to conduct a comparative study of the performance between socially responsible and non-socially responsible investment funds, using funds domiciled in Portugal and Spain. Various multi-factor models, including the three-factor model of Fama and French (1992), the four-factor model of Carhart (1997), and the five-factor model of Fama and French (2015), were employed to assess performance. The sample comprised 125 investment funds, with 43 identified as socially responsible and 82 as non-socially responsible. The study's findings indicate that there are no significant differences between socially responsible funds and their conventional counterparts. The majority of funds experience performance alterations during periods of crisis compared to crisis-free periods. Additionally, when comparing non-conditional models with conditional models, an improvement in the explanatory power of the latter is observed. This suggests that the inclusion of the dummy variable enhances the quality of fit for the models.

With confirmed COVID-19 cases surpassing the 8.5 million mark around the globe, there is an imperative need to deepen the efforts from the international scientific community to gain comprehensive understanding of SARS-CoV-2. Although the main clinical manifestations are associated with respiratory or intestinal symptoms, reports of specific and non-specific neurological signs and symptoms, both at presentation or during the course of the acute phase, are increasing. Approximately 25-40% of the patients present neurological symptoms. The etiology of these neurological manifestations remains obscure, and probably involves several direct pathways, not excluding the direct entry of the virus to the Central Nervous System (CNS) through the olfactory epithelium, circumventricular organs, or disrupted blood-brain barrier (BBB). Furthermore, neuroinflammation might occur in response to the strong systemic cytokine storm described for COVID-19, or due to dysregulation of the CNS angiotensin system. Descriptions of neurological manifestations in patients in the previous coronavirus (CoV) outbreaks have been numerous for the SARS-CoV and lesser for MERS-CoV. Strong evidence from patients and experimental models suggests that some human variants of CoV have the ability to reach the CNS and that neurons, astrocytes and/or microglia can be target cells for CoV. A growing body of evidence shows that astrocytes and microglia have a major role in neuroinflammation, responding to local CNS inflammation and/or to dysbalanced peripheral inflammation. This is another potential mechanism for SARS-CoV-2 damage to the CNS. In this work we will summarize the known neurological manifestations of SARS-CoV-2, SARS-CoV and MERS-CoV, explore the potential role for astrocytes and microglia in the infection and neuroinflammation, and compare them with the previously described human and animal CoV that showed neurotropism. We also propose possible underlying mechanisms by focusing on our knowledge of glia, neurons, and their dynamic intricate communication with the immune system.

Sudden unexpected death (SUD) is a fatal event that occurs in an apparently healthy subject so that such an abrupt outcome could have not been predicted. SUD - including sudden intrauterine unexplained death (SIUD), sudden neonatal unexpected death (SNUD), sudden infant death syndrome (SIDS), sudden unexpected death of the young (SUDY), sudden unexpected death in the adult (SUDA) - occurs as the first manifestation of an unknown underlying disease or within a few hours of presentation of a disease. SUD is a major unsolved, shocking form of death that occurs frequently and can happen at any time without warning. For each case of SUD, a review of clinical history data and performance of a complete autopsy, particularly focused on the study of the cardiac conduction system were carried out according to the necropsy protocol devised by the Lino Rossi Research Center, Università degli Studi di Milano, Italy. Research cases are represented by 75 SUD victims, subdivided into 15 SIUD, 15 SNUD, 15 SUDY, and 15 SUDA victims, collected and selected for this study. After the routine autopsy and clinical history analysis, the death remained unexplained and hence a diagnosis of SUD was assigned to the 75. subjects, which included45 females (60%) and 30 (40%) males, ranging in age from 27 gestational weeks to 76 years. Serial sections of the cardiac conduction system disclosed frequent congenital alterations, of the cardiac conduction system in fetuses and infants. An age-related significant difference in distribution among the 5 age-related groups was detected for the following anomalies of the conduction system: central fibrous body (CFB) islands of conduction tissue, fetal dispersion, resorptive degeneration, Mahaim fiber, CFB cartilaginous meta-hyperplasia, His bundle septation, sino-atrial node (SAN) artery fibromuscular thickening, atrio-ventricular junction hypoplasia, intramural right bundle branch, and SAN hypoplasia. The results data are useful to understand the cause of death for all SUD cases that were unexpected and would have otherwise remained unexplained, so to motivate medical examiners and pathologists to perform more in-depth studies.

Global models have been developed to tackle the challenge of forecasting sets of series that are related or share similarities, but not for heterogeneous datasets. Various methods of partitioning by relatedness have been introduced to enhance the similarities of the set, resulting in improved forecasting accuracy but often at the cost of a reduced sample size, which could be harmful. To shed light on how the relatedness between series impacts the effectiveness of global models in real-world demand forecasting problems we perform an extensive empirical study using the M5 competition dataset. We examined cross-learning scenarios driven by the product hierarchy commonly employed in retail planning, which allow global models to capture interdependencies across products and regions more effectively. Our findings show that global models outperform state-of-the-art local benchmarks by a considerable margin, indicating that they are not inherently more limited than local models and can handle unrelated time series data effectively. The accuracy of data partitioning approaches increases, as the size of the data pools and the models' complexity decrease. However, there is a trade-off between data availability and data relatedness. Smaller data pools lead to increased similarity among time series, making it easier to capture cross-product and cross-region dependencies, but this comes at the cost of a reduced sample, which may not be beneficial. Finally, it's worth noting that the successful implementation of global models for heterogeneous datasets can significantly impact forecasting practice.

Unmanned Aerial Vehicles (UAVs) in particular multirotors are becoming the {\it de facto} tool for aerial sensing and remote inspection. In large industrial facilities, a UAV can transmit an online video stream to inspect difficult to access structures, such chimneys, deposits and towers. However, the communication range is limited, constraining the UAV operation range. This limitation can be overcome with relaying UAVs placed between the source UAV and the control station, creating a line of communication links. In this work we assume the use of a digital data packet network technology, namely WiFi, and tackle the problem of defining the exact placement for the relaying UAVs that creates an end-to-end channel with maximal delivery of data packets. We consider asymmetric communication links and we show an increase as large as $15$\% in end-to-end packet delivery ratio when compared to an equidistant placement. We also discuss the deployment of such a network and propose a fully distributed method that converges to the global optimal relay positions taking, on average, 1.4 the time taken by a centralized method.

The main purpose of this work is to contribute to understanding the mechanism of oxidation of the polymeric components of common disposable masks used during the COVID-19 pandemic to offer the chemical basis to predict their long-term behaviour under typical environmental conditions. Artificial ageing of representative mask layers under isothermal conditions (110℃) or accelerated photoageing showed that all the PP-made components underwent a fast oxidation process, following the typical hydrocarbon oxidation mechanism. In particular, yellowing and the melting temperature drop are early indicators of their diffusion-limited oxidation. Morphology changes also induced a loss of mechanical properties, observable as embrittlement of the fabric fibres. Results were validated through preliminary outdoor ageing of masks, which allows us to predict they will suffer fast and extensive oxidation only in the case of contemporary exposure to sunlight and relatively high environmental temperature, leading to their extensive breakdown in the form of microfiber fragments, i.e., microplastics.

The Internet-of-Things (IoT) enables enterprises to obtain profits from data but triggers data protection questions and new types of cyber risk. Cyber risk regulations for the IoT however do not exist. The IoT risk is not included in the cyber security assessment standards, hence, often not visible to cyber security experts. This is concerning, because companies integrating IoT devices and services need to perform a self-assessment of its IoT cyber security posture. The outcome of such self-assessment needs to define a current and target state, prior to creating a transformation roadmap outlining tasks to achieve the stated target state. In this article, a comparative empirical analysis is performed of multiple cyber risk assessment approaches, to define a high-level potential target state for company integrating IoT devices and/or services. Defining a high-level potential target state represent is followed by a high-level transformation roadmap, describing how company can achieve their target state, based on their current state. The transformation roadmap is used to adapt IoT risk impact assessment with a Goal-Oriented Approach and the Internet of Things Micro Mart model.

An ongoing EU Horizon 2020 Project called BionicVEST is investigating the effect of constant electrical stimulation (ES) of the inferior vestibular nerve in patients with bilateral vestibular dysfunction (BVD)[1]. The evidence is that constant ES results in improved postural stability and gait performance and so the question of central importance is how could constant ES of mainly saccular afferents in these BVD patients cause this improved performance? We suggest that the constant ES is substituting for the absent saccular neural input to the vestibular nuclei and the cerebellum in these BVD patients and indirectly via these structures to other structures which have been of great recent interest in motor control. One target area, the anterior midline cerebellum (the uvula) has recently been targeted as a location for deep brain stimulation in human patients to improve postural stability and gait. There are projections from midline cerebellum to basal ganglia including the striatum, structures involved in the initiation of gait. It may be that the effect of this activation of peripheral saccular afferent neurons is analogous to the effect of deep brain stimulation (DBS) by electrodes in basal ganglia acting to help alleviate the symptoms of patients with Parkinson's disease.

Background. Rectal Magnetic Resonance Imaging (MRI) is a key test in advanced rectal cancer and in the preoperative staging of a lesion suitable for transanal endoscopic surgery (TES). MRI is not operator-dependent, but its results when determining anatomical landmarks are variable. Method. Observational study of inter-observer concordance regarding four diagnostic tests used to establish the anatomical characteristics of rectal lesions: colonoscopy, rectal ultrasound (EUS), rectal MRI, and intraoperative rigid rectoscopy (IRR) in patients scheduled for transanal endoscopic surgery (TES) with curative intent. This inter-observational study assessed the concordance between four expert radiologists regarding the topographic evaluation by means of rectal MRI of lesions under consideration for TES. Results. Fifty-five consecutive rectal tumors were studied. For most of the items, the correlation between IRR and colonoscopy or EUS was generally very good (intraclass correlation coefficient -ICC-)>0.75), although the correlation between MRI and IRR in relation to size by quadrants (ICC=0.092) and location by quadrants (ICC=0.292) was weak. The ICC for the other items obtained excellent correlations: Kappa index >0.80 for all items except for the distance from the peritoneal reflection to the anal verge, where it was merely good (IK=0.606). Conclusions. The anatomical description of rectal lesions that are candidates for TES provided by means of IRR, EUS, colonoscopy and MRI is reliable. The MRI is less reliable, but in the hands of expert radiologists, the anatomical study of rectal lesions is accurate and reproducible.

Health differences across socioeconomic strata have always pointed out that poorer and minorities have higher mortality and morbidity than richer and majorities. This difference is exacerbated for particular populations such as the victims of ongoing armed conflicts, who are also much harder to quantify due to the conflict itself. This study applies network analysis to a combination of three large administrative records for the health system and mortality records in the province of Risaralda (Colombia) between 2011 and 2016. It produces the most common causes of morbi-mortality for both victims of violence and the poorest inhabitants of Risaralda, defined as those who qualify as recipients of subsidies from the Colombian welfare program called SISBEN in the categories of highest need. Both populations show high morbidity frequencies for non-communicable diseases such as Type II diabetes, hypertension, and hyperglyceridaemia, mostly associated with exposure to unhealthy lifestyles. Additionally, the mortality outcomes reflect the different lifestyles and medical treatments of both subpopulations. While the poorest replicate the same causes identified for morbidity, the victims of armed conflict die of additional causes including Type II diabetes, which reflects the even worse conditions they face.

Currently, companies and SMEs (small and medium enterprises) are looking to be more competitive. In order to achieve this, they are adopting new business models and strategies that allow them to move towards sustainability. Strategies such as CSR (Corporate social responsibility) and supply chain management have become essential for ensuring a company’s permanence and financial consolidation. The literature has stated that the theories of Stakeholders and Sustainability are fundamental pillars for the development and sustained growth of business. The purpose of this article is to examine the effects of CSR and the SC (supply chain) on innovation, image and reputation, and in turn, their influences on profitability in SMEs. This research is based on a sample of 143 companies in the city of Guaymas Sonora, in Mexico. For the analysis and validation of the results, we used the SEM (Structural Equation Modeling) statistical technique based on the variance, through PLS (Partial Least Squares) (using SmartPLS version 3.2.6 Professional). The findings show that SMEs that develop social and sustainable practices increase their level of innovation, and improve their image, their reputation, and their financial profitability. This work contributes mainly to the development of Stakeholders and Sustainability.

This paper presents the experimental campaign conducted near the Condoroma dam at 4075 m a.s.l. in an experimental setup consisting of a series of standard profile spillways with a vertical upstream face of up to five different dimensionless heights (P/Hd). The experimental results indicate that for all P/Hd ratios studied, the discharge coefficients adjusted to the Condoroma altitude are lower than those reported by classical formulations used in conventional spillway design. As a result, a generalized equation is proposed to estimate the discharge coefficient for standard spillways located in dams at similar elevations above sea level.

Guava (Psidium guajava L.) is a species is widely distributed in Córdoba, despite this, there are few studies that have been carried out to understand its genetic diversity. For this reason, the objective of this research was to evaluate the genetic diversity and variability of guava (Psidium guajava L) using microsatellite markers in Montería, Córdoba-Colombia. Forty-five accessions were evaluated. For DNA extraction, the CTAB 2x extraction protocol was used with modifications. The extracted DNA was amplified by the PCR technique using seven microsatellite markers. A total of 46 alleles were found with an average of 6.5 alleles per locus. A total of 28 private alleles were identified in the populations, possibly fixed by different evolutionary forces. The evaluated population presented an average expected heterozygosity of 0.572 and the observed heterozygosity was lower (0.058). The fixation index presented a total average of 0.906, indicating that in Montería there is an excess of homozygotes. The PIC values allowed us to determine that the markers mPgCIR9, mPgCIR11, mPgCIR13, mPgCIR16, mPgCIR19 and mPgCIR22 are highly informative, while mPgCIR23 is moderately informative. The guava population in Montería presented a low genetic diversity within the subpopulations, which could be related to inbreeding events such as self-pollination..

ACL instability poses a significant challenge in traumatology and orthopedic medicine, often requiring accurate diagnosis for appropriate treatment. While the pivot-shift test offers a crucial means of assessment, its reliance on subjective interpretation underscores the need for supplementary imaging studies. This study aims to address this limitation by developing a Bayesian classification algorithm tailored for integration into a mobile application. Using the built-in inertial sensors of smartphones, this new approach aims to dynamically evaluate rotational stability during knee examinations. Orthopedic specialists conducted knee evaluations on 52 subjects, with subsequent analysis revealing interesting insights. Intraobserver and interobserver analyses, as measured by ICC, demonstrated strong agreement both in terms of timing between maneuvers (ICC = 0.94) and signal amplitude (ICC = 0.71-0.66). Notably, the Bayesian algorithm successfully classified 95% of joint hypermobility cases, with an additional 7 cases of hyperlaxity identified by the Pivot-Shift Meter (PSM). These findings highlight the practicality and effectiveness of implementing a Bayesian classification algorithm within a mobile application for assessing and categorizing signals captured by smartphone inertial sensors during the pivot-shift test.

this article presents the results of implementing existing software tools in the accounting field. The teaching processes regarding the use of Learning and Knowledge Technologies (TAC) in the university environment, and very specifically, in what has to do with the pedagogical integration of the same in the curriculum is deficient and disjointed with the current technological development. Thus, in the different curricula of professional programs of Public Accounting and related, the courses related to computer automation processes are oriented only towards the management of computer science and accounting software and the great diversity of existing applications that would undoubtedly directly benefit the student to know the potential of these in their future accounting practice is not taken into account. Strengthen the various skills of a Public Accountant in training through Learning and Knowledge Technologies (TAC), under the hypothesis of developing skills in the accounting field through TACs. The research was developed using a quantitative approach, an empirical-analytical method, with a type of descriptive research under an experimental design based on G1 x O1 and G2–O2, three phases were defined. In the first phase, the characterization of the existing software tools in the accounting field was carried out. In the second phase, their relevance was determined. In the third phase, performance was evaluated and then classified in a repository. The data obtained were analyzed with parametric analysis techniques through which it was found that the difference in quantitative results in the academic process between the experimental and control groups was statistically significant, which concluded the success of the experimental treatment. The use of CT scans in the classroom by the experimental group resulted in an improvement in their academic performance compared to the control group, strengthening their self-learning processes and facilitating the development of cognitive functions and skills necessary in the exercise of their accounting profession. This research supports and strengthens the work skills developed in the classroom for public accounting students. The tools TAC is developed from the request made by the radiometry laboratory as a first phase and a second phase is necessary for validation with experts.

The postpartum period is marked by profound changes in women at a physical, psychological, and physiological level. Many of these changes persist after four to six weeks postpartum, and most women do not resume their levels of physical activity, which increases the risk of remaining inactive for many years. It is crucial to implement effective programs that promote exercise during the postpartum period. The objective of this study was to test the feasibility and analyze the effects of a structured and supervised postpartum exercise program on the maternal health and fitness parameters. To analyze the potential effects of the intervention, the level of physical activity, quality of life, pelvic girdle and low back pain, fatigue, depression, and the level of functional and physical fitness were assessed at baseline, after 8 weeks, and after 16 weeks of intervention. Feedback on the exercise program was collected after the final assessment. The results showed that a structured and supervised postpartum exercise program was feasible and safe, and produced positive effects on selected maternal health and fitness parameters. These results will encourage a study protocol with a larger sample in order to prove its effectiveness, improve the guidelines for postpartum exercise, and incorporate this program into a routine health care setting.

HIV/AIDS infection increases vulnerability to ill-health states and has a major impact on the general health status. This study aims to describe Angolan adolescents and adults’ comprehensive knowledge of HIV/AIDS and its associated factors based on the 2016 demographic and health survey (DHS). Data from 19,785 individuals between the ages of 15 and 49 years old, who re-sponded to all the DHS questions between October 2015 and March 2016 were included in this study. Multivariable analysis using logistic regression was used to compute the adjusted odds ratio and respective 95% confidence intervals. In Angola, 47.7% of the respondents had general com-prehensive knowledge of HIV/AIDS. The odds of having comprehensive knowledge about HIV/AIDS were higher among individuals who watch television (aOR: 2.40; 95% CI: 2.11, 2.72) or read journals and magazines (aOR: 1.99; 95% CI: 1.72, 2.30) more than once a week and, people with primary or higher-level education (aOR: 1.83; 95% CI: 1.67, 2.00). Similarly, for people living in urban areas (aOR: 1.51; 95% CI: 1.34, 1.71). These results may reflect important inequities and can assist decision-makers in advocating to continue to invest in health literacy for HIV but also in the development of tailored interventions in this area.

Secure attachment, developed through consistent relationships with attachment figures in childhood, is a crucial factor in fostering healthy interpersonal relationships and a positive self-perception. This research aimed to assess how perceived security, as an indicator of secure attachment, predicts adult self-concept through the mediating effects of resilience and positive self-esteem. A quantitative, cross-sectional, and non-probabilistic study was conducted with 383 participants, of whom 76.2% were females, aged between 17 and 86 years (M = 28.52, SD = 12.23). Correlational analyses revealed significant positive associations between perceived security, self-concept, resilience, and positive self-esteem. Path analysis demonstrated that resilience and positive self-esteem sequentially mediate the relationship between perceived security during childhood and adult self-concept (Total Effect R2 = .34, F(1,381) = 193, p < .001; Indirect effect of sequential mediation b = .02, CI 95% [.01, .04]). Findings suggest that the ability to cope with ad-versity and personal acceptance underlie the impact of perceived security on self-concept. It is recommended to promote not only secure attachment in family interventions but also resilience and self-esteem in programs targeting adolescents, youth, and adults.

The Dual-Frequency Precipitation Radar (DPR) on the Core GPM satellite provides spaceborne 3-dimensional observations of the precipitation field and surface rainfall rate with quasi global coverage. The present study evaluates the behavior of liquid precipitation intensity, radar reflectivity factor (ZKu and ZKa) and Drop Size Distribution (DSD) parameters (weighted mean diameter Dm and intercept parameter Nw) of the GPM DPR derived products version 07 from 2014 to 2023. Observations from seven Parsivel disdrometers located in different topographic zones in the Western Mediterranean are taken as ground reference. Four matching techniques between satellite estimates and ground level observations were tested, and best results were found for the so-called optimal comparison approach. Overall, GPM DPR products capture well the variability of the observed DSD at different rainfall intensities. However, overestimation of the mean Dm and underestimation of the mean Nw are observed, being much more sensitive to errors in drop diameters larger than 1.5 mm. Moreover, lowest errors were found for radar reflectivity factor and Dm, and highest for Nw and rainfall rate. In addition, the GPM DPR convective and stratiform classification was tested and it was found a substantial overestimation of stratiform cases compared to disdrometer observations.

Background: There is a high bureaucratic and administrative burden associated with health care tasks (test requesting, visits scheduling, supporting documents provision) that has historically largely fallen on health care professionals, which is one among the factors contributing to low job satisfaction and lower productivity. Incorporating new professional roles that help to better respond to the needs of both patients and professionals can increase the quality and efficiency of service provision. Objective: To evaluate the impact of the clinical assistant’s introduction in the Sant Joan de Déu Barcelona Children’s Hospital’s pediatric oncology department, in terms of displacement of activity loads carried out by this new professional role and the consequent time freed up for physicians. Methodology: Observational and retrospective study using administrative data based on the analysis of the type of activity performed by clinical assistants and the measurement of the time freed up in favor of the physicians, based on in situ timekeeping, to approximate the potential skill mix productivity increase. Results: Since its implementation in the pediatric oncology department, clinical assistants have performed 13,553 requests (69.93% of the total), representing a total saving of 266.83 hours or 6.67 workweeks of 40 hours. They performed 74.25% of outpatient surgical requests in the oncology department, 87.5% of day hospital requests and 54.13% of total requests in the outpatient consultations area. Conclusion: The introduction of clinical assistants in the oncology department could be efficient to the extent that it displaces a good part of the bureaucratic and administrative tasks previously performed by health care professionals. This delegation allows them to work more closely to the maximum of their competences and the physicians to have more time for higher added value clinical tasks. In terms of efficiency, this role change enables to optimize the clinical process, reducing the cost by 56% compared to the conventional model.

Vimentin is an intermediate filament protein that plays key roles in integration of cytoskeletal functions, and therefore in basic cellular processes such as cell division and migration. Consequently, vimentin has complex implications in pathophysiology. Vimentin is required for a proper immune response, but it can also act as an autoantigen in autoimmune diseases or as a damage signal. Although vimentin is a predominantly cytoplasmic protein, it can also appear at extracellular locations, either in a secreted form or at the surface of numerous cell types, often in relation to cell activation, inflammation, injury or senescence. Cell surface targeting of vimentin appears to associate with the occurrence of certain posttranslational modifications, such as phosphorylation and/or oxidative damage. At the cell surface, vimentin can act as a receptor for bacterial and viral pathogens. Indeed, vimentin has been shown to play important roles in virus attachment and entry of severe acute respiratory syndrome-related coronavirus (SARS-CoV), dengue and encephalitis viruses, among others. Moreover, the presence of vimentin in specific virus-targeted cells and its induction by proinflammatory cytokines and tissue damage contribute to its implication in viral infection. Here, we recapitulate some of the pathophysiological implications of vimentin, including the involvement of cell surface vimentin in interaction with pathogens, with a special focus on its role as a cellular receptor or co-receptor for viruses. In addition, we provide a perspective on approaches to target vimentin, including antibodies or chemical agents that could modulate these interactions to potentially interfere with viral pathogenesis, which could be useful when multi-target antiviral strategies are needed .

Laser-plasma interactions of ultra-short laser pulses with solid targets can generate highly intense pulses of protons and ions with energies of several MeV. The spectra of these particles are spread over a wide range following a Maxwellian distribution. We report on the design and testing of a magnetic chicane for the selection of protons within a limited energy window. It consists in two successive, anti-parallel dipole fields generated by cost-effective, permanent C-magnets with customized configuration and longitudinal positions. The chicane has been implemented into the target vessel of a petawatt laser facility under constraints on the direction of the incoming laser beam and guidance of the outgoing particles through a vacuum port. The separation of protons and carbon ions within distinct energy intervals has been demonstrated and compared to a ray tracing code.

Deep learning is emerging in many industrial sectors in hand with big data analytics to streamline production. In the biomanufacturing sector, big data infrastructure is lagging comparatively to other industries. A promising approach is to combine Deep Neural Networks (DNN) with prior knowledge in Hybrid Neural Network (HNN) workflows that are less dependent on the quality and quantity of data. This paper reviews published articles over the past 30 years on the topic of HNN applications to bioprocesses. It revealed that HNNs were applied to various bioprocesses, including microbial cultures, animal cells cultures, mixed microbial cultures, and enzyme biocatalysis. HNNs were mainly applied for process analysis, process monitoring, development of software sensors, open- and closed-loop control, batch-to-batch control, model predictive control, intensified design of experiments, quality-by-design, and recently for the development of digital twins. Most previous HNN studies combined shallow Feedforward Neural Networks (FFNNs) with physical laws, such as macroscopic material balance equations, following the semiparametric design principle. Only recently, deep HNNs based on deep FFNNs, Convolution Neural Networks (CNN), Long Short-Term Memory (LSTM) networks and Physics Informed Neural Networks (PINNs) have been reported. The biopharma sector is currently a major driver but applications to biologics quality attributes, new modalities, and downstream processing are significant research gaps.

Esterases are hydrolases that catalyze the hydrolysis of esters into the corresponding acids and alcohols. The development of fluorescent probes for detecting esterases is of great importance due to their wide spectrum of biological and industrial applications. These probes can provide a rapid and sensitive method for detecting the presence and activity of esterases in various samples, including biological fluids, food products, and environmental samples. Fluorescent probes can also be used for monitoring the effects of drugs and environmental toxins on esterase activity, as well as to study the functions and mechanisms of these enzymes in several biological systems. Additionally, fluorescent probes can be designed to selectively target specific types of esterases, such as those found in pathogenic bacteria or cancer cells. In this review, we summarize the recent fluorescent probes described for the visualization of cell viability and some applications for in vivo imaging. On the other hand, Positron Emission Tomography (PET) is a nuclear-based molecular imaging modality of great value to study the activity of enzymes in vivo. We provide some examples of PET probes for imaging acetylcholinesterases and butyrylcholinesterases in brain, which are valuable tools for diagnosing dementia and monitoring the effects of anticholinergic drugs on the central nervous system.

Ultrasonic imaging & NDE applications can greatly improve their signal-to-noise ratios (SNR) by driving each transducer (composing piezoelectric arrays) with a spike giving pulsed power of k-Watts, repetitively at a PRF = 5000 spikes/s, by using a HV capacitive-discharge generator. However very-high levels, of pulsed intensities (3-10 A) and voltages (300-700 V) must be considered for a rigorous spike modeling. Even though the consumed "average" power will be small, the intensity through each transducer achieves several amperes, so the pulsed powers delivered by each HV generator can attain levels higher than in CW high-power ultrasonic applications: e.g., up to 5 kW / spike. This is concluded here from a transient modeling of the loaded generator. Then, unforeseen phenomena rise: intense brief pulses of driving power & emitted force in transducers, and non-linearities in driver semiconductors, because their characteristic curves only include linear ranges. But fortunately, piezoelectric devices working in this intense regime do not show serious heating problems, because the average power remains being moderate. Intensity, power and voltage, driving a broadband transducer from a HV capacitive pulser, are calculated to drastically improve (in ≅ 40 dB) the ultrasonic net dynamic range available, with emitted forces ≅ 250 Newtons pp and E/R received pulses of 70 V pp.

Nowadays, mindfulness-based interventions (MBI) have experimented a remarkable development of studies among childhood and adolescent interventions. For this reason, dispositional mindfulness (DM) measures for children and adolescents have been developed to determine the effectiveness of MBI at this age stage. However, little is known about how key elements of DM (f. e., cognitive de/fusion or experiential avoidance that both conform psychological inflexibility) are involved in the mechanisms of the children and adolescents’ mental health outcomes. This research examined the mediating effect of cognitive fusion between DM and anxiety and other negative emotional states in a sample of 318 Spanish primary-school students (aged between 8 and 16 years, M=11.24, SD=2.19, 50.8% males). Participants completed the AFQ-Y, which is a measure of psychological inflexibility that encompasses cognitive defusion and experiential avoidance; CAMM (DM for children and adolescents), PANAS-N (positive and negative affect measure for children, the Spanish version of PANASC), and STAIC (an anxiety measure for children). The study accomplished ethical standards. As MBI relevant literature has suggested, cognitive defusion was a significant mediator between DM and symptoms of both negative emotions and anxiety in children and adolescents. However, experiential avoidance did not show any significant mediating relationship. Probably, it is needed improvement of the assessment of experiential avoidance. MBI programs for children and adolescents may include more activities for reducing the effects of the cognitive defusion on their emotional distress.

Proprotein convertases activate various envelope glycoproteins and participate in cellular entry of many viruses. We recently showed that the convertase furin is critical for the infectivity of SARS-CoV-2. This study investigated the implication of the two cholesterol-regulating convertases SKI-1 and PCSK9 in SARS-CoV-2 entry. We used cell-to-cell fusion assays in HeLa cells and pseudoparticle entry into Calu-3 cells. SKI-1 increases cell-to-cell fusion by enhancing the activation of SREBP-2, whereas PCSK9 reduces cell-to-cell fusion by promoting the cellular degradation of ACE2. Metalloprotease activation is sensitive to enhanced cholesterol levels resulting from SKI-1-activated SREBP-2 that leads to enhanced S2’ formation. However, high metalloprotease activity results in S2’ shedding into a new C-terminal fragment (S2”), leading to reduced cell-to-cell fusion. Indeed, S-mutants that increase S2’’ formation, abolish S2’ and cell-to-cell fusion, as well as pseudoparticles entry, indicating that the formation of S2’’ prevents SARS-CoV-2 cell-to-cell fusion and entry. We next demonstrated that PCSK9 enhanced the cellular degradation of ACE2, thereby reducing cell-to-cell fusion. However, different from the LDLR, a canonical target of PCSK9, the C-terminal CHRD domain of PCSK9 is dispensable for the PCSK9-induced degradation of ACE2. Molecular modeling suggested binding of ACE2 to the Pro/Catalytic domains of mature PCSK9. Thus, both cholesterol-regulating convertases SKI-1 and PCSK9 can modulate SARS-CoV-2 entry via two independent mechanisms.

The objective of the study was to apply the principles of analytical quality by design (AQbD) to the analytical method for the determination of the radiochemical purity (PQR) of the radiopharmaceutical sodium iodide 131I oral solution, by means of thin layer chromatography (TLC) with a Radio-TLC scanner, the same one that allows to evaluate the quality of the product. For the AQbD, the analytical objective profile (ATP), critical quality attributes (CQA), risk management, the method operable design region (MODR) were defined through the response surface methodology for method optimization using the MINITAB ® software, Control Strategy and the validation of the method where the parameters of selectivity, linearity, precision, robustness, detection limit, quantification limit, range and stability of the sample solution were evaluated. Under the experimental conditions, the conditions of the method were demonstrated by TLC-Scanner and optimization was carried out for an injection volume of 3 µL, radioactive concentration of 10 mCi/mL and carrier volume of 40 µL. It was statistically demonstrated that the method is selective for the 131I iodide band Rf of 0,8 and for the radiochemical impurity IO₃⁻ Rf of 0.6, linearity from 6,0 to 22.0 mCi/mL, intermediate precision with Global RSD of 0,624%, robustness with global RSD 0,101%, detection limit of 0,09 mCi/mL, quantification limit of 0.53 Ci/mL, conforming range, and stability of the sample solution evaluated over time 0, 2 and 20 hours with a global RSD of 0,362%, obtaining consistent results. The development of the method based on AQbD allowed the generation of a design space and an operational space with knowledge of all the characteristics and limitations of the method, likewise in all the operations the conformity of the tests to the acceptance criteria was verified. The validity of our method is concluded under the established conditions, suitable for use in the manufacturing process of sodium iodide 131I and application in nuclear medicine services.

This paper presents a study about the integration of Piezoelectric Energy Harvesting Systems (PE-EHS) in building envelopes for powering Fiber Bragg Grating (FBG) sensors, enabling efficient and low-consumption monitoring with the objective to leverage Structural Health Monitoring (SHM). The research includes preliminary tests conducted in a real environment to validate the PE-EHS when fully integrated into the façade, capturing mechanical vibrations generated mainly by wind loads. Based on these activities, the final configuration of PE-EHS is defined to provide a complete system for façade monitoring. This integrated system includes the Piezoelectric Generator (PEG), Supercapacitor (SC), Power Conditioner Circuit (PCC), Fibre Optic Sensing (FOS) Interrogator, and the IoT Gateway trans-mitting measurement data within an Internet of Things (IoT) monitoring platform. This configuration is tailored to address the challenges related to the structural integrity of building envelopes. Results demonstrate a potential for a stand-alone solution in the façade sector, but, raising issues for certain limitations, requiring further investigation. In particular, the study emphasizes constraints related to the energy production of PE-EHS for façade integration. It highlights the necessity to carefully consider these limitations within the broader context of their applicability, providing insights for the informed deployment of Piezoelectric Energy Harvesting technology in building envelope monitoring.

Poikilodermatous plaque-like hemangioma (PPH) is a recently described clinical and pathological entity, with only 18 cases reported in the literature. Although uncommon, this benign condition presents consistent clinical and histological findings. We present a new case of PPH in an 81-year-old male and review the existing literature. The persistence over time and the need to distinguish PPH from more significant lesions underscore the importance of its clinical and pathological recognition.

Despite the impact that climate change is having on our planet and considering its consequences for future generations, much of the academic literature focuses on adolescent and adult percep-tions, giving little relevance to children's perceptions. Children's voices have the potential to in-fluence public opinion, which may in turn determine the direction of a new policy on the cli-mate crisis. In this context, it is urgent that we understand how children perceive this problem. This quantitative study was based on the application of 245 questionnaires to children aged be-tween 9 and 13 years old from five schools in north-eastern Portugal, more specifically in the region of Trás-os-Montes. To collect the data, we used a questionnaire with 26 questions, being 24 of closed response, Likert type, one of them open response, and one multiple choices. The da-ta were statistically treated using SPSS software. The results show that most of the children ex-press concern about the study's potential problem. However, they show some doubts and a lack of knowledge about some of the themes. We found differences between the two study cycles, with children in the 6th grade having a higher average in the understanding of the phenomenon, as well as the level of education of the parents being positively correlated with a more ecocen-tric posture. The female students also showed a slightly more ecological posture, i.e., an eco-friendlier posture. From the results obtained, we can open new paths for future research and contribute to the definition of policies and educational practices since the school has the respon-sibility to cooperate in the production of values, attitudes, and pro-environmental behaviours.

The Internet-of-Things (IoT) triggers new types of cyber risks. Therefore, the integration of new IoT devices and services requires a self-assessment of IoT cyber security posture. By security posture this article refers to the cybersecurity strength of an organisation to predict, prevent and respond to cyberthreats. At present, there is a gap in the state-of-the-art, because there are no self-assessment methods for quantifying IoT cyber risk posture. To address this gap, an empirical analysis is performed of 12 cyber risk assessment approaches. The results and the main findings from the analysis is presented as the current and a target risk state for IoT systems, followed by conclusions and recommendations on a transformation roadmap, describing how IoT systems can achieve the target state with a new goal-oriented dependency model. By target state, we refer to the cyber security target that matches the generic security requirements of an organisation. The research paper studies and adapts four alternatives for IoT risk assessment and identifies the goal-oriented dependency modelling as a dominant approach among the risk assessment models studied. The new goal-oriented dependency model in this article enables the assessment of uncontrollable risk states in complex IoT systems and can be used for a quantitative self-assessment of IoT cyber risk posture.

This work studies the discontinuities features of sedimentary flysch materials in a 100 km2 area belonging to the Basque Arc. Such materials are common in this Spanish Alpine region located in the north of the Iberian Peninsula. A total of 33 outcrops are investigated by an intensive geotechnical investigation including geomechanical stations, boreholes and mechanical laboratory tests. Two flysch units are characterized: the Upper Aguinaga Formation or siliciclastic flysch, and the Lower Itziar Formation or calcareous flysch. Differences between both flysch formation are found. Joints in the siliciclastic flysch formation present an undulated roughness, with a spacing narrower and a persistence lower than in the calcareous flysch formation, which exhibits higher friction angles, although roughness is essentially planar. In addition, the potential of using Artificial Intelligence (AI) techniques, particularly Artificial Neural Networks and Support Vector Machine, to estimate the Geological Strength Index (GSI) from the Rock Quality Design (RQD) and some discontinuities features (spacing, persistence, aperture and roughness) is investigated. AI techniques are found to be satisfactory, being the Support Vector Machine with a linear kernel the technique which achieves the best performance.

This article aims to delve into the Equity, Diversity and Inclusivity (EDI) issues prevalent in the engineering disciplines in Canada and Spain, shedding light on the common obstacles faced by underrepresented individuals and highlighting potential strategies to foster a more inclusive and diverse engineering community in these nations. Two strategic lines have been identified: (a) facilitating university education access to underrepresented and minority groups, and (b) Accompanying and guiding such students during university training, setting them up for successful future careers. The article also shows the sets of strategies employed in Canada and Spain, clearly distinguishing the approach taken in the two countries. While in Canada, there is a more decentralized approach wherein the universities device their strategies and agenda to address EDI issues, in Spain there is a stronger and direct involvement of the government to ensure a comprehensive, system-wide approach to tackling EDI issues in academia.

The rapid ageing of populations around the World is creating complex challenges for national governments. The establishment of sustainable and equitable long-term care systems for old and dependent people is one of the main issues of social policy in developed countries. The aim of this work is to define a cost model for residential and day care centres for dependent persons in Cantabria (Spain). The cost model will make it possible to establish the theoretical cost of attending to the needs of the different types of dependent persons in the different types of care centres, and the methodology used could be extrapolated to other regions. The daily cost per user for elderly residential care is €53.72. The cost per user in elderly day centres (5 days) is 32.56 euros. In residential centres for people with disabilities, the values range between €47.41 and €75.25 depending on the category of the centre. In three categories of centres the public price is not enough to cover the cost (physical disability, intellectual disability, mental illness – low care), and therefore the administration should reconsider their public prices for these kind of centres if they want to really contribute to the sustainability of these residential care centres. This research will have important implications for policy-makers in a context of fulfilment of SDGs and where better support for old and disabled people and their carers, as well as fair and efficient financing of social care services, are essential to address the current and future challenges of dependency.

(1) Background: Spain launched an official campaign, #EsteVirusLoParamosUnidos, to try and unite the efforts of the entire country through citizen cooperation to combat coronavirus. The research goal is to analyze the Twitter campaign’s repercussion on general citizen feeling. (2) Methods: The research is based on a composite design that triangulates from a theoretical model, a quantitative analysis and a qualitative analysis. (3) Results: Of the 7357 tweets in the sample, 72.32% were found to be retweets. Four content families were extracted: politics, education, messages to society and defense of occupational groups. The feelings expressed ranged along a continuum, from unity, admiration and support at one end to discontent and criticism regarding the health situation at the other. (4) Conclusions: The development of networked sociopolitical and technical measures that enable citizen participation facilitates the development of new patterns of interaction between governments and digital citizens, increasing citizens’ possibilities of influencing the public agenda and therefore strengthening citizen engagement vis-à-vis such situations.

A new approach to the measurement with elastic lidar of depolarization produced by atmospheric aerosols is presented. The system uses two different telescopes: one for depolarization measurements and another for total-power measurements. The system architecture and principle of operation are described. The first experimental results are also presented, corresponding to a collection of atmospheric conditions over the city of Barcelona.

In recent years, the emergence of the concept of immunometabolism has shed light on the pivotal role that cellular metabolism plays in both the activation of immune cells and the development of immune programs. The antiviral response, a widely distributed defense mechanism used by infected cells, serves to not only control infections but also to attenuates their deleterious effects. The exploration of the role of metabolism in orchestrating the antiviral response represents a burgeoning area of research, especially considering the escalating incidence of viral outbreaks coupled with the increasing prevalence of metabolic diseases. Here, we present a review of current knowledge regarding immunometabolism and the antiviral response during viral infections. Initially, we delve into the concept of immunometabolism by examining its application in the field of cancer—a domain that has long spearheaded inquiries into this fascinating intersection of disciplines. Subsequently, we explore examples of immune cells whose activation is intricately regulated by metabolic processes. Progressing with a systematic and cellular approach, our aim is to unravel the potential role of metabolism in antiviral defense, placing significant emphasis on the innate and canonical interferon response.

The permeation of dioxin-like pollutants, namely, chlorinated dibenzodioxins and dibenzofurans, through lipid membranes has been simulated using classic molecular dynamics (CMD) combined with the umbrella sampling approach. The most toxic forms of chlorinated dibenzodioxin and dibenzofuran, 2,3,7,8-tetrachloro-p-dibenzodioxin (TCDD) and 2,3,7,8-tetrachlorodibenzofuran (TCDF), and a dioleyl-phosphatidylcholine (DOPC) lipid membrane of 50 Å wide have been chosen for our study. The free energy profile shows the penetration process is largely favoured thermodynamically (DG≈-12 kcal/mol), with a progressively decrease of the free energy until reaching the energy minima at distances of 8Å and 9.5Å from the centre of the membrane for, respectively, TCDD and TCDF. At the centre of the membrane, both molecules display subtle local maxima with free energy differences of 0.5 and 1 kcal/mol with respect to the energy minima for TCDD and TCDF, respectively. Furthermore, the intermolecular interactions between the molecules and the lipid membrane have been characterized at the minima and the local maxima using hybrid quantum mechanics/molecular mechanics energy decomposition analysis (QM/MM-EDA). Total interaction energies of -17.5 and -16.5 kcal/mol have been found at the energy minima for TCDD and TCDF, respectively. In both cases, the dispersion forces govern the molecule-membrane interactions, no significant changes have been found at the local maxima, in agreement with the classical free energy profile. The small differences found in the results obtained for TCDD and TCDF point out the adsorption and diffusion processes through the cell membrane are not related to the different toxicity shown by these pollutants.

At present, business strategies in SMEs (Small and medium enterprises) are crucial for consolidation in highly competitive markets, in achieving a better image and in business profitability. One of the strategies that have the most success and business success are sustainable practices and social responsibility such as: ISO 14001 and ISO 26001. The literature related to sustainable business is based mainly on the theory of resources and capabilities, and in theory based on Stakeholders. These currents state that companies should focus on profitable strategies to ensure significant and long-term results, in order to achieve organizational and financial results for stakeholders. In this work, the sample consists of 215 companies from the commerce, services and industry sectors, located in the southern region of the State of Sonora in Mexico. The objective of the work is to analyze the influence of ISO 14001 and 26001 standards on the image and profitability of SMEs. The statistical analysis of the data has been carried out through the linear regression technique by OLS (Ordinary Least Squares). The findings prove that the ISO 14001 standard is the one that most influences the improvement of the business image and the level of profitability of the SME. In addition, we discovered that ISO 26001 has a partial influence on the image and profitability of the SME.

The multidrug-resistant fungal pathogens belonging to the Candida haemulonii complex and the phylogenetically related species Candida auris are well-known for causing infections that are difficult to treat due to their multidrug-resistance profile. C. auris is even more worrisome due to its ability to cause outbreaks in healthcare settings. These emerging yeasts produce a wide range of virulence factors that facilitate the development of the infectious process. In recent years, the aggregative phenotype has been receiving attention, as it is mainly associated with defects in cellular division and its possible involvement in helping the fungus to escape from host immune responses. In this study, we initially investigated the aggregation ability of 18 clinical isolates belonging to the C. haemulonii species complex and C. auris. Subsequently, we evaluated the effects of physicochemical factors on the fungal aggregation competence. The results demonstrated that cell aggregation was a typically time-dependent event, in which almost all studied fungal isolates exhibited high aggregation after 2 h of incubation at 37°C. The aggregation was not impacted by pH, temperature, -mercaptoethanol (a protein-denaturing agent) and EDTA (a chelator agent). Conversely, proteinase K, trypsin and sodium dodecyl sulfate significantly diminished the aggregation. Collectively, our results demonstrated that the aggregation ability in these opportunistic yeast pathogens is time-dependent, and surface proteins and hydrophobic interactions seem to mediate cell aggregation, since the presence of proteases and anionic detergent affected the aggregation ability. However, further studies are necessary to better elucidate this phenomenon.

Lifestyle has been associated with breast cancer risk through different pathways, including oxidative stress. Antioxidant enzymes are endogenous defense mechanisms against oxidative stress damage, and this response might be modulated by the genetic variation in these enzyme-codifying genes. This study aimed to analyze the synergistic effect of an antioxidant Healthy Lifestyle Index (HeLiX) composed of principal components of Western dietary pattern, alcohol consumption, smoking and physical activity, and genetic polymorphisms in the first-line antioxidant response family genes SOD, GPX, and CAT on breast cancer risk. We included 176 SNPs, and only CAT rs554576 remained significant after correction for multiple comparisons. Breast cancer odds were reduced at the highest (T3) and medium (T2) tertiles of the HeLiX. When stratified by HeLiX, we observed a reduced risk of breast cancer with at least one T-allele, and the effect increased in a dose-dependent manner. Compared to the reference category (HeLiX T1 and AA genotype), women at the HeLiX T3 with AT and TT genotypes in postmenopausal women showed an OR = 0.15 (95% CI 0.07–0.32). For HeLiX T2 and AT genotype OR = 0.26 (95% CI 0.13–0.54); for TT genotype OR = 0.24 (95% CI 0.12–0.45). For premenopausal women, at the HeLiX T3 and AT genotype OR = 0.29 (95% CI 0.13–0.62); for the TT genotype OR = 0.21 (95% CI 0.08–0.51). We also observed an inverse association for HeLiX T2 and TT genotype (OR 0.39 95% CI 0.17–0.87). Our study shows a significant synergistic gene-environment interaction on an additive scale, contributing to understanding pathways involved in breast cancer etiology and prevention.

Baía de Todos os Santos is the second largest bay in Brazil and is home to important ecosystems, including estuarine systems and mangroves. However, studies on the seasonal variability of its soil properties and composition are still scarce. For this study, soil and leaf samples were seasonally collected from mangrove forests at four sites (Cacha Prego, Ponta Grossa, Ilha de Maré, and Pitinga), which are representative of different environmental conditions within the BTS. Soil physicochemical properties, soil composition and partition of Fe forms were determined, and analysis of minerals by Scanning Electron Microscope, was performed on soil samples. Isotopic ratios (δ13C, δ15N) were also determined on soil and leaf samples. Soils showed significant spatial and temporal changes affecting both their properties (pH, Eh) and their composition (TOC, pyrite and Fe oxyhydroxide contents). Clear spatial changes were observed in redox potential, significantly affecting the concentrations of the different geochemical forms of Fe, particularly the concentrations of crystalline oxyhydroxydes and pyrite in one of the studied sites. In three of the study sites, pyrite crystals showed clear evidence of degradation associated with sandy soils. Finally, δ13C and N/C ratios in soils seem to suggest a mixed origin of organic matter.

Associations between blood cancer and genetic predisposition, including both inherited variants and acquired mutations and epimutations, have been well characterized. However, the majority of these variants affect noncoding regions, making their mechanisms difficult to hypothesize and hindering the translation of these insights into patient benefits. Fueled by unprecedented progress in next-generation sequencing and computational integrative analysis, studies have started applying combinations of epigenetic, genome architecture and functional assays to bridge the gap between noncoding variants and blood cancer. These complementary tools have not only allowed us to understand the potential malignant role of these variants but also to differentiate key variants, cell types and conditions from misleading ones. Here, we briefly review recent studies that have provided fundamental insights into our understanding of how noncoding mutations at enhancers predispose and promote blood malignancies in the context of spatial genome architecture.

Abstract: COVID-19 in 2020 brought challenges to the Brazilian public health system with an emerging virus with respiratory contagion called SARS-CoV-2. There are few studies in Brazil and in some countries, on the increased incidence of certain viral respiratory infections, includ-ing H1N1 and coronavirus and their association with low levels of vitamin D, zinc and iron. The aim of this study was to demonstrate that the deficit of vitamin D, zinc and iron has an impact on the infectious process of patients with COVID-19 and to establish new forms of prevention for the worsening of COVID-19 in the human body. Data were collected from medical records and test results from patients being followed up during the treatment period for COVID-19. Patients with low blood levels of vitamin D, zinc and iron during the treatment period of COVID-19 had a higher percentage of worsening and complications requiring hospitalization in intensive care beds. The ingestion of vitamin D, zinc and iron in the treatment period of patients with COVID-19 in addition to being an immunological protector against SARS-CoV-2 and alleviating the process of worsening the disease can also act as a biomarker in cases of this disease.

Abstract: Urban population growth and the expansion of the built environment, pollution, overexploitation of water, inequality in water distribution, and the impacts of climate change in future availability of water, are all elements that jeopardize urban water security. Due to the complexity of urban water systems and their relevance for urban life, a holistic and integrative perspective is therefore needed to address such challenges. In this paper, Urban Water Metabolism (UWM) has been used for comprehensively understanding water (in)security in the City of Puebla (Mexico) and its metropolitan area. Water inflows and outflows have been estimated using a Material Flow Analysis (MFA) method with data either obtained from official sources or simulated with the Monte Carlo method. Our findings show that the UWM configuration in the City of Puebla and its metropolitan area is effective for generating profits to service providers and water related business, yet ineffective to guarantee citizens’ Human Right to Water and Sanitation (HRWS), a right recognized in the Constitution of Mexico. We conclude that to advance towards an inclusive and sustainable provision of water, economic interests must be reconsidered and therefore adjusted so they can be in line with such aspirational socioecological goals. UWM accounting can therefore inform new water governance arrangements, those based on both the best available knowledge and a vibrant participation of all relevant stakeholders.

The increased number of buildings in urban areas limits the creation of vegetated areas, leading to the search for alternatives to create spaces to promote contact with nature. In this context, green roofs have been increasingly studied. These structures have specific microclimatic condi-tions requiring an accurate study of the most appropriate vegetation to use. This study aims to analyze the long-term viability of vegetation installed on an experimental green roof open-air lab. This analysis was done through images obtained from photographic records and later in-serted into the ImageJ program, to identify species and evaluate the area covered by vegetation. Only a few of the species that were planted in the test beds over the years have persisted to the present, while other species have spontaneously appeared. Also, surveys were used to learn about people's preferences for the vegetation on these test beds. These showed that people favor recognizable plants with plenty of vibrantly colored blossoms. It was feasible to choose the best plants for green roofs in the studied conditions as a result of the analysis, taking into account the ground cover percentage by vegetation, its persistence, and the preferences of the respondents.

1) Background: There are few studies of burnout syndrome (BS) in occupational therapists (OTs), and protective factors of BS has received little attention in the scientific literature. This research aimed to estimate the prevalence of BS, characterize the associated psychosocial factors, and analyze their relationship with health in a sample of Spanish OTs. (2) Methods A total of 127 therapists completed the Maslach Burnout Inventory (MBI) and other standardized questionnaires measuring: personality traits (reduced five-factor personality inventory, NEO-FFI), coping styles (Coping Strategies Questionnaire, CAE), work-family conflict (Survey Work-Home Interaction Nijmegen, SWING), professional factors (role ambiguity/clarity and modified role conflict questionnaires), and the perception of health (Goldberg’s General Health Questionnaire). Several correlational and multiple regression analyses were performed to study the psychosocial predictors of burnout and its relationship with health perception. (3) Results showed that 15.8% of the professionals presented BS, with emotional exhaustion (EE; 38.7%) being the most compromised dimension. Neuroticism, role conflict, negative work-family interaction, and open emotional expression (OE) significantly predicted a higher EE. The main predictors of cynicism (CY) were being male, role conflict, and OE. Finally, role conflict and role ambiguity and social support-seeking were significant predictors of reduced professional efficiency (PE). (4) Conclusion: A high percentage of OTs with BS advocates becoming aware of the importance of this syndrome in the health community, it would be critical to consider the protective factors (i.e., emotional management, social support) that help promote OTs’ well-being and health.

Musculoskeletal disorders are increasingly prevalent worldwide, causing significant socioeconomic burdens and diminished quality of life. Notably, patellar chondropathy (PC) is among the most widespread conditions affecting the joint structures, resulting in profound pain and disability. Hyaluronic acid (HA) and platelet-rich plasma (PRP) have emerged as reliable, effective, and minimally invasive alternatives. Continuous research spanning from laboratory settings to clinical applications demonstrate the numerous advantages of both products. These encompass lubrication, anti-inflammation, and stimulation of cellular behaviors linked to proliferation, differentiation, migration, and the release of essential growth factors. Cumulatively, these benefits support the rejuvenation of bone and cartilaginous tissues, which are otherwise compromised due to the prevailing degenerative and inflammatory responses characteristic of tissue damage. While existing literature delves into the physical, mechanical, and biological facets of these products, as well as their commercial variants and distinct clinical uses, there is limited discussion on their interconnected roles. We explore basic science concepts, product variations, and clinical strategies. This comprehensive examination provides physicians with an alternative insight into the pathophysiology of PC as well as biological mechanisms stimulated by both HA and PRP that contribute to tissue restoration.

Using pumps operating as turbines (PATs) offers the possibility of increasing the sustainability of water and energy systems by recovering the excess of energy that would be otherwise lost in pressure reducing valves or head loss chambers. In on-grid applications, there are many research works and implementations of PATs. However, there is still limited research for the optimization of efficiency and stability of PATs operating in off-grid systems. This work contributes to the development of stable direct current (DC) off-grid electric systems based on PATs, by optimizing and analysing the energy efficiency and stability for a wide range of operation. A self-excited induction generator (SEIG) coupled to the PAT is provided to cover the conventional type of electric ma-chines typically coupled to the hydraulic pumps. In this context, a methodology is proposed, based on the hydraulic, mechanical and electric subsystems, to define the PAT-SEIG operational area, to maximize energy conversion and the system efficiency. This will guarantee stable electric output quantities when operating in a DC off-grid system. In addition, an analytical model is proposed to estimate the PAT-SEIG operation under specific conditions. With this, water managers are suitable to design and optimize an off-grid PAT-SEIG system and to define the best hydraulic machines, electronic equipment, and all different control elements to maximize energy conversion within the target of operational limits. To develop and verify this new methodology, two micro PAT-SEIG setups were implemented in the hydraulic laboratory of IST/CERIS under typical operating conditions. The proposed solution proved to be resilient under a variable load regime. The system's maximum efficiency can be adapted using different capacitor values for the excitation of the SEIG, and the operational range is limited to the electric components. Considering the nominal efficiencies of the system’s components, the maximum p.u. efficiency obtained for each PAT-SEIG system were between 0.7 and 0.8 p.u.

In the present work we revise and extend the Characteristic Crystallographic Element (CCE) norm, an algorithm used to simultaneously detect radial and orientational similarity of computer-generated structures with respect to specific reference crystals and local symmetries. Based on the identification of point group symmetry elements, the CCE descriptor is able to gauge local structure with high precision and finely distinguish between competing morphologies. As test cases we use computer-generated monomeric and polymer systems of spherical particles interacting with the hard-sphere and square-well attractive potentials. We demonstrate that the CCE norm is able to detect and differentiate, between others, among: hexagonal close packed (HCP), face centered cubic (FCC), hexagonal (HEX) and body centered cubic (BCC) crystals as well as non-crystallographic fivefold (FIV) local symmetry in bulk 3-D systems; triangular (TRI), square (SQU) and honeycomb (HON) crystals, as well as pentagonal (PEN) local symmetry in thin films of one-layer thickness (2-D systems). The descriptor is general and can be applied to identify the symmetry elements of any point group for arbitrary atomic or particulate system in two or three dimensions, in the bulk or under confinement.

Multiple sclerosis (MS) is a chronic autoimmune inflammatory disease that affects the nervous system. Peripheral blood leukocyte telomere length (LTL) and mitochondrial DNA copy number (mtDNA-CN) are potential biomarkers of disability and neurological damage. The present work evaluated LTL and mtDNA-CN in 75 relapsing-remittent MS (RRMS) patients 50 of whom had an Expanded Disability Status Scale (EDSS) 0 to 3 (mild-moderate disability), and 25 had an EDSS of 3.5 to 7 (severe disability). Absolute LTL and absolute mtDNA-CN were measured via real-time polymerase chain reaction (qPCR). The LTL and mtDNA-CN were significantly lower in RRMS severe disability than in RRMS mild-moderate disability (3.924 ± 0.124 vs 2.854 ± 0.092, p<00001; 75.14 ± 1.77 vs 68.06 ± 1.608, p<0.00001, respectively). The LTL and mtDNA-CN showed a linear correlation in RRMS with mild-moderate disability (r=0.2986, p=0.0351). In addition, in a binary logistic regression model the LTL can predict severe disability (AUC=0.697, p=0.0031, cutoff ≤ 3.0875 Kb, sensitivity= 73.1%, specificity=62.5%), the prediction is improved by including age to the model (AUC=0.765, <0.0001, sensitivity=78.26%, specificity=81.25%). Aging is closely linked to the development of disability in RRMS and can be evaluated through LTL and mtDNA-CN absolute quantification.