The effect of the different dental implants positioning region on the stress performance of the implant-supported prosthesis is not yet clear. This study evaluated the dental treatment with six dental implants in three different models and three different occlusal loading conditions, in terms of the biomechanical response of implants, prosthetic screw and maxilla, using three-dimensional finite element analysis. The finite element models were modelled containing external hexagon implants, as well as a Cobalt-Chromium superstructure. Three types of loads were applied: in the area of ​​the central incisors, first premolar and in the second molars. For the finite element simulations, the von-Mises stress peaks in the implant and in the surrounding cortical bone were analyzed. All recorded results reported higher values ​​for the implant-supported prosthesis in group C compared to the groups A and B. The highest stress values, ​​regardless the evaluated model, was in the prosthesis in group C and in screws, the smallest were in group A.

The World Health Organization has defined the outbreak of the new coronavirus as a public health emergency of international concern. The average age of patients affected by the disease caused by the virus ranges from 49 to 59 years. The symptoms of coronavirus disease 2019 (COVID-19) infection include fever, cough, acute respiratory disease, and, in severe cases, the disease may progress to pneumonia and renal failure that may lead to death. Many oral and maxillofacial hospital procedures produce aerosol and droplets contaminated by blood, bacteria, and viruses. The purpose of this study is to gather recommendations from health authorities and scientific articles in order to educate surgeons regarding the procedures to assist and treat in oral and maxillofacial surgeries. The objective is to prevent the transmission of COVID-19 during the treatment of patients in urgent and emergency situations. The study’s methodology used the guidelines provided by the Brazilian College of Oral and Maxillofacial Surgery, in addition to the recommendations and epidemiologic data from national and international health authorities. The implementation of special precautions in oral and maxillofacial surgeries may elucidate questions related to the transmission of the disease by asymptomatic carriers and help control the spread of the virus.

Green peppers (Capsicum annuum L.) is a fruit vegetable with great culinary versatility, and present important nutritional properties for human health. Water deficit negatively affects nutritional quality of green peppers fruits. This study aimed to investigate the influence of zinc oxide nanoparticles (ZnONPs), associated with plant growth-promoting bacteria (PGPB), on the post-harvest quality nutritional of green peppers subjected to water deficit. In an open-field ex-periment, two irrigation levels (50 and 100% of crop evapotranspiration - Etc), four treatments composed by combination of ZnONPs, zinc sulfate (ZnSO4) and PGPB (T1 = ZnSO4, T2 = foliar ZnONPs, T3 = foliar ZnONPs + PGPB, T4 = ZnSO4 via soil + PGPB via soil) and a control treatment (Check) were tested. Water deficit or water deficit mitigation treatments did not interfere with the physical-chemical parameters (except vitamin C content) and physical color parameters (except L*) of green pepper. The water deficit reduced the levels of Ca, Mg, P, K, Mn, Fe, B, and Zn in the fruits. The foliar application of ZnONPs in association with PGPB provided better nutritional quality of green pepper in terms of vitamin C and mineral nutrients. Under water deficit, ZnONPs or ZnSO4 via foliar, associated or not with PGPB, increased the levels of Ca, P, Mg, and Fe in the fruits. Applying Zn via foliar as ZnONPs or ZnSO4 mitigated the negative effects of water deficit on the quality of pepper fruits that was enhanced by the Bacillus subtilis and B. amyloliquefaciens inoculation.

The effective treatment of human immunodeficiency virus (HIV), also known as acquired immunodeficiency syndrome (AIDS), has transformed a highly lethal disease into a chronic and manageable condition. However, better methods need to be developed for eliminating the virus from reservoirs, enhancing patient access and adherence to therapy, and improving treatment in the long term to reduce adverse effects. From the perspective of drug discovery, one promising strategy is the development of anti-HIV prodrugs. This approach aims to enhance the efficacy and safety of treatment, promoting the development of more appropriate and convenient systems for patients. In this review, we discussed the use of the prodrug approach for HIV antiviral agents and emphasized nucleoside reverse transcriptase inhibitors. We comprehensively described various strategies that are used to enhance factors such as water solubility, bioavailability, pharmacokinetic parameters, permeability across biological membranes, chemical stability, drug delivery to specific sites/organs, and tolerability. These strategies might help researchers conduct better studies in this field. We also reported successful examples from the primary therapeutic classes while discussing the advantages and limitations. In this review, we highlighted the key trends in the application of the prodrug approach for treating HIV/AIDS..

In the age of social media, images come from unreliable sources that may change their content to fit a narrative. Automated detection of forged images is a complex task, especially considering recent technological advances in image manipulation software. However, in the existing literature, it is possible to identify two general approaches adopted by detection methods, active and passive. Active techniques preemptively act on an image by inserting structures before any manipulation is made that can verify its authenticity. In contrast, passive methods analyze the content of an image in search of traces of manipulation. In this way, this research proposes a novel approach to image manipulation detection, combining two passive methods through neural networks, creating a generalist approach capable of detecting with greater accuracy than the methods that compose it. Furthermore, this work used a combination of four datasets available in the literature for training and evaluation. After training, the merged approach obtained an accuracy of 89.59% in the set of validation images, significantly higher than the model trained with only unaltered images, which obtained 78.64%, and the two other models trained using images with a feature selection method applied to enhance inconsistencies that obtained 68.02% for Error-Level Analysis images and 50.70% for the method using Discrete Wavelet Transform. In addition to the performance improvement, the proposed approach’s accuracy variation was lower than the other models.

This study aims to report the clinical signs, therapy, necropsy, and histopathological findings of the first case of airsacculitis caused by enterobacteria and eggs of the superfamily Diplotriaenoidea in M. choliba in the Amazon Biome. The bird was admitted without clinical signs, had been hospitalized for observation for five months, and had started the rehabilitation process for release 37 days before it started to show signs of weakness, lack of appetite, cachexia, dyspnea, ruffled feathers, vomiting, and dry feces. Therapy with oxytetracycline (48 mg/kg), sulfamethoxazole (48 mg/kg), mebendazole (25 mg/kg), potenay (0.5 ml/kg), sodium chloride 0.9% (50 ml /kg) and mercepton (5ml/kg), however, after five days of starting the treatment, the bird died. At necropsy, prominence of the keel, pieces of food in the oral cavity and proventriculus, thickened air sacs, intestine with firm stools, and the presence of gas, hepatomegaly, and splenomegaly were observed. The parasitological examination showed eggs of the Diplotriaenoidea superfamily. The microbiological analysis identified Escherichia coli, Klebsiella pneumoniae, and Enterobacter aerogenes. Histopathological examination showed heterophilic bacterial airsacculitis. The diagnosis was confirmed through clinical signs, necropsy findings, and parasitological, microbiological, and histopathological examination results.

This study aims to report the clinical signs, therapy, necropsy, and histopathological findings of airsacculitis caused by enterobacteria and the occurrence of the superfamily Diplotriaenoidea eggs in the feces of Megascops choliba in the Amazon Biome. A tropical screech owl nestling was rescued and admitted for hand-rearing. The animal was bred for five months. The feed was based on Zophobas morio larvae and thawed chicken breast meat with vitamin and mineral supplements. On the 37th day of hacking training for release, the owl showed weakness, lack of appetite, regurgitation, cachexia, dyspnea, ruffled feathers, dry feces in the vent and peri cloaca, and diarrhea. The parasitological examination showed eggs of the Diplotriaenoidea superfamily in the feces. The therapy was with oxytetracycline (48 mg/kg), sulfamethoxazole (48 mg/kg), mebendazole (25 mg/kg), potenay (0.5 ml/kg), sodium chloride 0.9% (50 ml /kg) and mercepton (5ml/kg). However, after five days of starting the treatment, the bird died. At necropsy, prominence of the keel, pieces of undigested food in the oral cavity and proventriculus, intestinal gas, and thickened and turbid air sacs were found. The microbiological analysis of air sacs identified Escherichia coli, Klebsiella pneumoniae, and Enterobacter aerogenes. Histopathological examination showed heterophilic bacterial airsacculitis.This study aims to report the clinical signs, therapy, necropsy, and histopathological findings of the first case of airsacculitis caused by enterobacteria and eggs of the superfamily Diplotriaenoidea in M. choliba in the Amazon Biome. The bird was admitted without clinical signs, had been hospitalized for observation for five months, and had started the rehabilitation process for release 37 days before it started to show signs of weakness, lack of appetite, cachexia, dyspnea, ruffled feathers, vomiting, and dry feces. Therapy with oxytetracycline (48 mg/kg), sulfamethoxazole (48 mg/kg), mebendazole (25 mg/kg), potenay (0.5 ml/kg), sodium chloride 0.9% (50 ml /kg) and mercepton (5ml/kg), however, after five days of starting the treatment, the bird died. At necropsy, prominence of the keel, pieces of food in the oral cavity and proventriculus, thickened air sacs, intestine with firm stools, and the presence of gas, hepatomegaly, and splenomegaly were observed. The parasitological examination showed eggs of the Diplotriaenoidea superfamily. The microbiological analysis identified Escherichia coli, Klebsiella pneumoniae, and Enterobacter aerogenes. Histopathological examination showed heterophilic bacterial airsacculitis. The diagnosis was confirmed through clinical signs, necropsy findings, and parasitological, microbiological, and histopathological examination results.

Cardiovascular diseases (CVDs) a leading cause of mortality worldwide. Therefore, there is in-creasing interest in dietary interventions to reduce risk factors associated with these conditions. Cherries and berries are rich sources of bioactive compounds and have attracted attention for their potential cardiovascular benefits. This review summarizes the current research on the effects of cherries and berries consumption on cardiovascular health, including in vivo studies and clinical trials. These red fruits are rich in phenolic compounds, such as anthocyanins and flavonoids, which have multiple bioactive properties. These properties include antioxidant, anti-inflammatory, and vasodilatory effects. Studies suggest that regular consumption of these fruits may reducing in-flammation and oxidative stress, leading to lower blood pressure, improved lipid profiles, and enhanced endothelial function. However, interpreting findings and establishing optimal dosages is challenge due to the variability in fruit composition, processing methods, and study design. Despite these limitations, the evidence highlights the potential of cherries and berries as components of preventive strategies against CVD. Further research is needed to maximize their health benefits and improve clinical practice.

Soarinho Alkaline Intrusion, southeastern Brazil, makes part of the Serra do Mar Igneous Province, and it is composed of alkali feldspar syenite, alkali feldspar trachyte, quartz syenite, and mon-zonite. Geochemical and geochronological analysis of the Soarinho were compared with data from its neighbors Rio Bonito and Tanguá. Zircon U-Pb Laser Ablation ages show that Soarinho is youngest than Rio Bonito and Tanguá. Ages obtained from the monzonite (60 ± 2 Ma), alkali feldspar syenite (58 ± 2 Ma), and quartz syenite (58 ± 2 Ma) are indistinguishable within error. Petrographic and geochemical data show a clear contrast among Soarinho, Rio Bonito, Tanguá, and Lu-Hf isotopic data for the three alkaline intrusions (all negative), point to some similarities in their sources. The data suggest an enriched mantle source for Soarinho; however, an older con-tinental crust contribution cannot be discarded.

Many factors drive land desertification, especially in arid and semi-arid regions. However, the numerous driving factors of desertification make analyses computer expensive. Cloud computing comes along to address this problem, especially in developing countries. The objective of this work was to assess the sensitivity of the East Atlantic Basin, Brazil, to desertification using the Mediterranean Desertification and Land Use (MEDALUS) model and Google Earth Engine (GEE). The model is composed of four environmental Quality Indices (QIs) associated with soil (SQI), vegetation (VQI), climate (CQI) and management (MQI), and contains factors influencing the desertification process. Digital databases of the factors were pre-processed and uploaded to GEE for analysis. We report Environmentally Sensitive Areas (ESAs) and Environmentally Critical Factors (ECF) maps of the East Atlantic Basin, which showed that most of the basin is in either critical (49.4%) or fragile (35.7%) state of sensitivity. In contrast, only a smaller portion of the area is unaffected (5%) or potentially affected (10.1%). Sensitivity to desertification was inversely correlated with the presence of vigorous vegetation. A joint analysis of ESAs and ECF shed light on the importance of each factor in the sensitivity to desertification. The East Atlantic Basin shows a high degree of sensitivity to desertification, thereby demanding more attention and establishment of measures to mitigate the negative impacts of the desertification process.

Many factors drive land desertification, especially in arid and semi-arid regions. However, the numerous driving factors of desertification make analyses computer expensive. Cloud computing comes along to address this problem, especially in developing countries. The objective of this work was to assess the sensitivity of the East Atlantic Basin, Brazil, to desertification using the Mediterranean Desertification and Land Use (MEDALUS) model and Google Earth Engine (GEE). The model is composed of four environmental Quality Indices (QIs) associated with soil (SQI), vegetation (VQI), climate (CQI) and management (MQI), and contains factors influencing the desertification process. Digital databases of the factors were pre-processed and uploaded to GEE for analysis. We report Environmentally Sensitive Areas (ESAs) and Environmentally Critical Factors (ECF) maps of the East Atlantic Basin, which showed that most of the basin is in either critical (49.4%) or fragile (35.7%) state of sensitivity. In contrast, only a smaller portion of the area is unaffected (5%) or potentially affected (10.1%). Sensitivity to desertification was inversely correlated with the presence of vigorous vegetation. A joint analysis of ESAs and ECF shed light on the importance of each factor in the sensitivity to desertification. The East Atlantic Basin shows a high degree of sensitivity to desertification, thereby demanding more attention and establishment of measures to mitigate the negative impacts of the desertification process.

The relationship between perception of anxiety and quality of life in caregivers of children with autism was verified. To verify quality of life, the Short Form Healthy Survey Item was used; perception of anxiety was assessed using the Beck Anxiety Inventory. 80 caregivers of children with autism participated, with 68.7% of caregivers being mothers. Of the total number of caregivers, 68.8% had a severe level of anxiety. Regarding quality of life, they demonstrated greater impairment in Limitation due to physical aspects, Limitation due to emotional aspects, Vitality and Pain. Caregivers with severe anxiety levels had worse quality of life in the domains of pain (p = 0.012), social aspects (p =< 0.001), limitation due to emotional aspects (p = 0.001) and mental health (p =< 0.001). However, in the functional capacity domain, caregivers with a moderate level of anxiety had a better physical capacity score (p = 0.001). There was a negative correlation between the general anxiety score and the general physical (p = 0.029) and general emotional component of quality of life (p =< 0.001). It was found that caregivers of children with ASD present losses related to psychological factors, quality of life and the lack of social support.

Keywords: Lightning; Land Cover and Land Use; Topographic Effects, Itacaiúnas River Hydrographic Basin

Introduction: Dental segmentation in panoramic radiograph has become very relevant in dentistry, since it allows health professionals to carry out their assessments more clearly and helps them to define the best possible treatment plan for their patients. Objectives: In this work, a comparative study is carried out with four segmentation algorithms (U-Net, DCU-Net, DoubleU-Net and Nano-Net) that are prominent in the medical literature on segmentation and we evaluate their results with the current state of the art of dental segmentation in panoramic radiograph. Methods: These algorithms were tested with a dataset consisting of 1,500 images, considering experiment scenarios with and without augmentation data. Results: DoubleU-Net was the model that presented the best results among the analyzed models, reaching 96.591% accuracy and 92.886% Dice using the dataset with data augmentation. Another model that stood out was Nano-Net using the dataset without data augmentation; this model achieved results close to that of the literature with only 235 thousand trainable parameters, while the literature model (TSASNet) contains 78 million. Conclusions: The results obtained in this work are satisfactory and present paths for a better and more effective dental segmentation process.

In the bioprinting process, controlling the motion of bioprinters involves a computer-aided design (CAD) model, converting that model into g-code, and transmitting the motion commands to the bioprinters. The g-code file contains information about the motion of the axes and can be generated using various software. However, a challenge arises when using g-code between different bioprinters. Therefore, the objective of this study was to propose a reliable method for analyzing the differences in 3D bioprinting devices by parameterizing a crucial variable for extrusion bioprinting: the E-value. Four bioprinters from three different manufacturers were used to investigate the extrusion behavior when subjected to the same E-value.

Shear thickening fluids (STF) are a class of fluids whose viscosity significantly rises under external loads. The research on these fluids has been advancing in recent years regarding prospective practical applications, including developing impact-absorbing composites. Following the green agendas governments and legislators advocate, this study investigates the combination of STF and other sustainable materials. Cork is a naturally occurring cellular material with a negative carbon footprint and superior energy absorption properties. With varying concentrations of STF material, cork agglomerates were formed. Notably, the analysed blends are homogeneous, contrasting with previous literary works. A series of experiments were conducted in quasi-static and dynamic conditions to determine the various mechanical responses. STF appears to influence the mechanical behaviour of cork agglomerates by providing softer deceleration rates and dispersing more energy through disaggregation mechanisms.

Lower back musculoskeletal disorders (MSD) are an important public health problem and the leading cause of disability worldwide, but with prevalence yet unknown among shellfish gatherers. To investigate the prevalence and work-related factors associated with lower back MSD in a population of female shellfish gatherers, an epidemiological cross-sectional study was carried out in Saubara, Bahia – Brazil, in 2013. The Brazilian version of the Job Content Questionnaire (JCQ) and the Nordic Musculoskeletal Questionnaire (NMQ), in addition to a questionnaire containing the physical demands adapted to the artisanal work, were applied to a random sample of 209 female shellfish gatherers. The prevalence of lower back MSD was 72.7%. Using multivariate logistic regression, the shellfish gatherers who had worked for more than 26 years in the activity showed a prevalence of 1.22 (95% CI: 1.04-1.44) times higher compared to those unexposed. Lower back MSD was 1.24 (95%CI: 1.08-1.42) times higher among those more exposed to work sitting with trunk flexion. Those performed manual handling and muscle force with the arms had a prevalence ratio of 1.18 (95%CI: 1.01-1.39). These results show the need for greater awareness of health and social welfare factors impacting workers in small-scale fisheries and will promote the elaboration of health care policies for this occupational class.

Medicinal plants for bone grafts are promising because they are free from infecting microorganisms and biocompatible. We report a novel study evaluating osteoregeneration of bone grafts from extracts of Alternanthera brasiliana and Fridericia platyphylla after bone injury induced by radius fracture in rats. Grafts were obtained using 2% chitosan gel and 0.5% hydroalcoholic extract. The rats were randomly divided into four experimental groups (N= 12): Negative control (NC) - Chitosan gel; Positive control (PC) - bovine mineral bone graft (Lumina Bone®, fine powder 0.5); F. platyphylla Graft (FRID) - 0.5% bone graft; A. brasiliana Graft (ABRA) - 0.5% bone graft. The animals were evaluated for three periods, 30, 60, and 90 days after fracture induction. Bone alkaline phosphatase (BSAP) and radiographic and histological evaluations were followed. After 90 days, there was an increase in BSAP for the ABRA group on the newly formed bone matrix but not for FRID, indicating the presence of active osteoblasts. Additionally, mature bone tissue and bone remodeling were observed, and a conspicuous presence of type I collagen for both FRID and ABRA. We demonstrated that FRID and ABRA grafts produced early bone neoformation. New perspectives for these species as a graft are suggested.

(1) Background: The diphtheria toxoid antigen is a major component in pediatric and booster combination vaccines and is known to raise a protective humoral immune response upon vaccination. Although antibodies are considered critical for diphtheria protection, little is known about the antigenic determinants that maintain humoral immunity. (2) Methods: One hundred twelve 15-mer peptides covering the entire sequence of DTx protein were prepared by Spot-synthesis. Membrane-bound peptides immunoreactivity with sera from mice immunized with triple DTP vaccine allowed mapping of continuous B-cell epitopes, topological studies, MAPs synthesis, and ELISA development. (3) Results: Twenty epitopes were identified, being 2 in the signal peptide, 5 in the CD, 7 in the HBFT domain, and 5 in the RBD. Two 17-mer (CB/Tx-2/12 and CB/DTx-4-13) derived bi-epitope peptides linked by a Gly-Gly spacer were chemically synthesized. The peptides were used as antigens to coat ELISA plates and assayed with human (huVS) and mice vaccined sera (miVS) for in vitro diagnosis of diphtheria. The assay proved to be highly sensitive (99.96%) and specific (100%) either for huVS and miVS and when compared with a commercial ELISA test, demonstrate high performance. (4) Conclusions: Our work displayed the complete picture of the linear B cell IgG response epitope of the DTx responsible for the protective effect and demonstrated the specificity and eligibility to enter phase IIB studies of some epitopes to develop new and fast diagnostic assays.

Objectives Bone fractures are very common diseases, which can be caused by impact injuries or physiological disorders. Thus, the present review aimed to study the use of medicinal plants in the healing mechanism of bone fractures. Evidence acquisition Through research in the PubMed, Google Academic, and Scielo databases, this article reviews 11 ethnopharmacological studies and 34 preclinical studies on the biological actions of different plants in bone fracture healing mechanism. Results Indian tribes have highlighted in the plants ethnopharmacological study for various diseases, including bone fractures. However, despite the large citations of traditional use, technical-scientific studies are still scarce in the literature. Chenopodium ambrosioides, Piper sarmentosum, quadrangular Cissus, Ricinus communis and Radix salvia miltiorrhiza plants were the most studied in the literature regarding their osteogenic, angiogenic, anti-inflammatory and remodeling effects, acting on bone receptors, stimulating bone metabolism, increasing minerals uptake, and assisting in free radicals breakdown. Conclusion Thus, the medicinal plants use is promising in the field of bone regeneration, as well as being alternative when conventional therapies are unfeasible, increasing herbal medicines demand and popularity.

Drought stress has been considered a major problem in coffee crops, and the higher occurrence of unpredictable environmental events has highlighted the vulnerability of agricultural systems. Several reports have indicated selenium (Se) as a plant biostimulant against environmental stress, including drought. The effects of Se in plants are related to the modulation of enzymatic activity, energetics and osmoprotectants plant content, and nutrient balance in plants. However, investi-gating the effective time of Se application is crucial for better understanding its effects on coffee plants, a drought-sensitive crop. This study aimed to investigate the role of Se supply in improving drought tolerance in coffee seedlings while also evaluating the best timing for Se application. Five times of Se foliar application were assessed during induced drought stress by PEG-6000 using the day of imposing stress as a default, plus two control treatments: i) with osmotic stress and without Se; ii) without osmotic stress and Se. The treatments were compared with both control treatments. Results demonstrated that the osmotic stress (OS) promoted mild stress in the coffee plants, as ex-pected. Plants under stress showed reduced GR and SOD activity compared with the non-stressed ones, and the OS induces starch degradation, which is potentialized by Se foliar supply, mainly when Se is applied before inducing the stress. The decline in the starch content might be considered a strategy to provide energy to coffee seedlings. The seedlings that received foliar Se application 8 days before the stress exhibited higher CAT, APX, and SOD than those that did not receive OS nor Se application. The results obtained in this study suggest that the previous Se foliar spray is more effective than the Se supply after OS to overcome the adverse condition. On the other hand, the post-stress application seems to impose extra stress on the plants, leading them to reduce the water potential.

In no-tillage systems, there is an accumulation of crop residues (CR) which plays an important role in available of soil-N. A study was set up to provide information regarding the CR N credit, and the influence of N mineral fertilizer. An incubation was run in a loam soil with addition of a similar rate of residue (10 Mg ha-1; sugarcane, soybean, and brachiaria) and N mineral fertilizer (urea; 120 kg N ha-1). After the stabilization of biological activity, soil and remaining residues were collected, and N monitored. Results showed that the N credit was positive with application of soybean, sugarcane, and brachiaria. There was an expressive performance of soybean N credit represented by a positive balance, and a reduction from 2.49 to 0.9 g kg-1 of N in residue, with direct increase of 90% of soil-N. There is no need of N fertilizer to potentialize the soybean N credit, but it is requested to potentialize N credit of brachiaria and sugarcane. The urea demonstrated be a good enhancer of brachiaria N credit, but it was not adequate to sugarcane residues. Based in our result, the accumulation and incorporation of CR can be considered as a N credit with positive contribution in soil-N.

Construction work is physically demanding. The tasks involved in this professional occupation physically exhaust workers and put them at high risk of injury. This work aims to analyze muscle fatigue in civil construction workers, with and without physical activity historical practice. For this purpose, the muscle activity of the Biceps Femoris, Trapezius Transversalis, Erector Spinae Longissimus, was evaluated using surface electromyography. Eleven male civil construction workers aged 26 to 52 years (38.00 ± 9.60), of whom 7 were untrained (N =7) and 4 were trained (N=4) participated in this study. Each subject completed two assessments at two different times. At the first assessment moment, a questionnaire was completed, and the maximum repetition of the deadlift exercise was assessed. At the second assessment, the subjects were assessed while performing the deadlift in four different situations: 50%RM at rest, 80%RM at rest, 80%RM at fatigue, and 50%RM at fatigue. The trained construction workers have higher levels of muscle activity, and there are no significant differences in muscle activation between the fatigued and non-fatigued sets. There appears to be a strong influence of physical exercise on muscle activity and fatigue in civil construction workers.

Electric Vehicles (EVs) are increasing the interdependence of transportation policies and the electricity market. EMMEV (Electricity Market Model with Electric Vehicles) is an experimental agent-based model that analyses how carbon reduction policy in transportation may increase number of Electric Vehicles and how does that would influence on the electricity price. Agents are ESCOs (Energy Service Providers) which can distribute fuels and their objective is to maximize their profit. In this paper, EMMEV is used to analyze the impacts of the LCFS (Low Carbon Fuel Standard), a performance-based policy instrument, on electricity prices and EV sales. The agents in EMMEV/regulated parties in LCFS should meet a certain CI (Carbon Intensity) target for their distributed fuel. In case, they cannot meet the target, they should buy credit to compensate for their shortfall and if they exceed, they can sell their excess. The results, considering the assumptions and limitations of the model, show that the banking strategy of the agents contributing in the LCFS might have negative impact on penetration of EVs, unless there is a regular Credit Clearance to trade credits. It is also shown that the electricity price as result of implementing the LCFS and increasing number of EVs has increased between 2–3 percent depending on banking strategy.

In order to monitor the diversity of terrestrial biomes, the Earth Exploration Satellite Services demand a high data rate for downlink transmissions while sharing their frequency spectrum with, and suffering interferences from, cellular Base Stations. Both highlight the dilemmas of spectral efficiency (bps/Hz) and spectral coexistence. Our research aims to mitigate interference on low orbit satellite downlinks using Cognitive Radio (CR) and Adaptive MODulation and CODing (MODCOD) techniques. To fulfill this: 1) we present CR approaches to enhance spectrum exploitation. Next, 2) we detail Adaptive MODCOD (ACM) technique to increase RF power and spectral efficiencies. Then, 3) we suggest the solution by combining 1) and 2). Afterwards, 4) we analyze it by monitoring the signal to interference plus noise ratio and the CR/MODCOD strategy. Finally, 5) we provide case studies to demonstrate the strategy’s effectiveness through the practical operation of satellite services, and 6) we conduct a bench test of the communication system.

A rehabilitation technique for asphalt pavements with geosynthetic is the application of impregnated nonwoven geotextiles between deteriorated and new asphalt overlays. The performance investigation of impregnated geotextiles proves that they are enhancing in mechanical and hydraulic properties. Although, the installation process may cause severe impacts on these materials’ performance. During the installation, the geotextile suffers damage due to the traffic of high load vehicles, as compactors and pavers, and the friction with granular materials found under its layer or poured above it. This paper aims to investigate how the damage caused by granular materials on nonwoven geotextiles impregnated with different asphalt emulsions effect on their strength resistance and permittivity. From two types of nonwoven geotextiles: polypropylene and polyethylene terephthalate, the comparison uses geotextiles in three conditions: not impregnated, impregnated with asphalt emulsion of rapid setting, and impregnated with asphalt emulsion changed by an elastomeric polymer. Part of the samples followed the damage according to ISO 10722 procedure, placed between three different scenarios of granular materials, applying gravel, sand, and clay. After the damage process, the samples were submitted to mechanical and hydraulic properties evaluations.

With the continuous growth of electric and electronic appliances’ usage, the waste produced with obsolete material (e-waste) has an increasing environmental impact. Also, the production of such appliances bears to increased consumption of natural resources and produces a multitude of toxic and hazardous substances, which typically are not properly treated. One of the approaches that may be adopted to reduce such problems relies on the circularization of the current linear model, commonly adopted in the EEE value chain. This includes recovering eol products and reintroducing its parts, components, or raw materials into the value chain (e.g. semiconductors, circuit boards, raw metals, etc.), thus contributing to a more sustainable value chain. In this article, we present a state-of-art review that focuses on approaches and solutions for the EEE value chain traceability, and analyses the technologies that may be beneficial for promoting and implementing the CE model in this value chain.

As recommended in the ICH Guidelines (S5-R2 and S6-R1), and based on bioethical concerns, we chose bovine embryos (BE) to check the in vitro embryo development considering the use of different amounts of rHGAL-1 as supplementations of in vitro embryo culture (IVP) mediums. Based on procedures for commercial BE in vitro production, using oocytes aspirated from slaughterhouse ovaries, the rHGAL-1 supplementation performed in two experiments (#01 on the oocyte maturation - IVM medium supplemented and experiment #2 on culture step IVC, supplemented SOF medium). There were IVP commercial procedures done, with 3 IVP batches per experiment and distributed the oocytes in four groups of treatment (one control group and three different dosages of rHGAL-1 to supplement both IVM and SOF mediums, using (2, 20 and 40µg.mL-1 respectively). A total of 962 (experiment 1) and 1,213 (experiment 2) oocytes were aspirated and submitted to IVP procedure. There was no damage to in vitro bovine embryos growth, considering cleavage percentage (%CLE), blastocysts development on day 7 (BlD7, BxD7, BhD7), or hatching blastocysts maturation on day 8 (BhD8%), regardless of rHGAL-1 supplementation. The immunohistochemistry assay with D8 embryos cultivated with rHGAL-1 supplementation on the culture medium (SOF medium) could demonstrate the presence of exogenous GAL-1, distributed in mass cell and trophoblastic cells, and the profile observed is dependent of exogenous supplementation and it was more evident in hatched embryos. The findings reassure the use of a reasonable amount of rHGAL-1 for in vitro embryonic development and make using rHGAL-1 in assisted reproduction in humans more reliable and safer.

The topography and chemical composition modification of the titanium (Ti) implants play a decisive role in improving biocompatibility and bioactivity, accelerating osseointegration, and, thus, determining clinical success. In spite of the development of surface modification strategies, bacterial contamination is a common cause of failure. The use of systemic antibiotic therapy does not guarantee action at the contaminated site. In this work, we proposed a surface treatment for Ti implant that aim to improve its osseointegration and reduce bacterial colonization in surgery site due to local release of antibiotic. The Ti disks were hydrothermally treated with 3M NaOH solution to form a nanostructured layer of titanate on the Ti surface. Metronidazole was impregnated on these nanostructured surfaces to allow its local release. The samples were coated with poly(vinyl alcohol) - PVA films with different thickness to evaluate a possible control of drug release. Gamma irradiation was used to crosslink the polymer chains leading to a hydrogel layer formation and to sterilize the samples. The samples were characterized by XRD, SEM, FTIR, contact angle measurements, “in vitro” bioactivity, and drug release analysis. The alkaline hydrothermal treatment successfully produced intertwined, web-like nanostructures on the Ti surface, providing wettability and bioactivity to Ti samples (Ti+TTNT samples). Metronidazole was successfully loaded and released from Ti+TTNT samples coated or not with PVA. Although the polymeric film acted as a physical barrier to drug delivery, all groups reached the minimum inhibitory concentration for anaerobic bacteria. Thus, the surface modification method presented is a potential approach to improve the osseointegration of the Ti implant and to associate local drug delivery to dental implants, preventing early infections and bone failure.

Introduction: Infections associated with medical implants pose significant challenges to healthcare, demanding the development of new effective antimicrobial strategies. This study focuses on the creation of a novel biological membrane with enhanced antimicrobial properties by with the incorporation of either vancomycin or silver nanoparticles. Methods: Pericardium samples were impregnated with either silver nanoparticles (AgNPs) or vancomycin (VAN). The antimicrobial activity of the membranes was assessed through qualitative microbiological analysis, biofilm production and animal in vivo model of infection. Histological analysis was performed on the pericardium samples, and quantitative microbiological analysis was conducted on the tissue from the animal model and biocompatibility evaluation. Statistical analyses were carried out using appropriate tests. Results: Microbiological tests confirmed both VAN and AgNP showed inhibition halos against bacteria. Histological analysis indicated minimal inflammatory response and bacterial presence in VAN and AgNP groups compared to the control group revealed reduced bacterial presence. Biomechanical testing showed that polypropylene had the lowest tensile strength, while AgNP-impregnated pericardium exhibited lower resistance than VAN-impregnated and control pericardium. Conclusion: Lyophilized and decellularized bovine pericardium as a substrate, combined with the incorporation of vancomycin or silver nanoparticles, provides a versatile platform for combating infections associated with medical implants.

In this study, an extensive data set was based on existing literature records in order to enable the suitability of several predictive models, from Multiple Linear Regression (MLR) to Neural Networks (NN). The main objective was to, through regression analyses, generate model computations to correlate tensile properties (UTS- Ultimate Tensile Strength, YTS – Yield Tensile Strength and EF – Elongation-to-Fracture) to a given alloy composition and microstructural spacing. This investigation led to positive results, as the highest accuracies of the trained modules (in 80% of the database) were found to be above ~82% (UTS and EF) and a maximum of ~98% (YTS), when analyzing the results to a test data set. Later, these models were used to define trends for possible next solder alloy commercial compositions. Overall, using the standard model’s setup, the Random Forest and Decision Tree models showed the highest accuracy results, with 0.958 for YTS as opposed to 0.907 for MLR. Moreover, Multilayer Perceptron (MLP)-optimized models yielded the best results for each variable, with the highest increases in accuracy associated with the YTS and EF. The present contribution might imply an important milestone towards alloy design research based on data science guidelines to unlock the full potential of former experiments and their extensive set of results.

Aiming the characterization of road dusts on the surrounding villages of an active mine and to assess metal(loids) bioaccessible fractions, a dust samples survey was undertaken. To achieve these objectives, pseudototal element concentration, mineralogical composition, Enrichment factor and in vitro extraction UBM assay for both gastric (G) and gastrointestinal (GI) phases, were determined. Results obtained revealed that arsenic represents the higher risk to humans, with mean pseudototal values higher than the maximum reference value range. Enrichment factor points to As significant to very high enrichment in all villages. Particles enriched in As, Ca, Fe, Cu, Al, Ti were identified by SEM-EDS in weathered agglomerates, linked to mine wastes and long-distance transport, both by wind and/or traffic. Arsenic bioaccessibility fraction (%BAF) presents low values in the studied samples, possibly due to low Fe complexes solubility with adsorbed As, limiting arsenic release and reducing its bioaccessibility. Concentrations of Cd bioaccessible G and GI phases are within the reference values range, while for Cu are above and for Pb are lower, than reference value range. Results show that the pseudototal fraction risk is overestimated when comparing to BAF (bioaccessible fraction), nevertheless, total G and GI risk are above the carcinogenic target risk (1.00E-06) in most samples. Carcinogenic risk of the bioaccessible contaminants shows that As is the element that represents higher risk for developing cancer over a lifetime, being ingestion the main risk route.

The research reported on this paper was aimed at improving the overall efficiency of a PDO certified artisanal cheese production process. Being a PDO certified foodstuff by the EU, it is considered to have properties and qualities determined by the geographical environment in which is made, with its production taking place in a specific and determined geographical location, in this case the Serra da Estrela region. In that sense, the authors conducted a mapping according to a systemic perspective of the processes involved in the context of manufacturing and distribution of certified Serra da Estrela cheese. Numerous methods were used throughout the process, such as a systemic design analysis, and techniques derived from ethnographic methods, which led to the collection of data in the field and consequently provided the immersion of the researcher in genuine work situations. Critical points were identified and emphasized in the systemic map with the purpose of encouraging initiatives to address and overcome the gaps and inefficiencies detected. The systemic design analysis triggered the development of design work. Observations following an ethnographic approach identified ergonomic risks in cheese making during the process of cutting excess chips, fostering the emergence of musculoskeletal disorders at the wrist. A tool that fits best to the task at hand was developed. A prototype of the new tool enabled collecting feedback from use in the work context, in order to inform product development. The domains of agricultural production and microbiology, considering the specific microorganisms developed trough the ripening process of the cheese, turned out to be aspects of high importance for the issue under focus, contributing to a broader understanding of the ripening process and its risks, simultaneously improving the efficiency and success of cheese production. If it were not for the systemic analysis, which served as a link between the boundaries of distinct domains such as the risk of microorganism contamination, ergonomics, energy efficiency, legislation and regulation policies, transportation challenges and economic viability, approached throughout the research. Simultaneously creating bridges between them, the various problems might not have been detected in the first place, as they are usually addressed in specialized disciplines, predetermined by the restrictions of each specific area of knowledge. As a consequence of the development of this research, which was based on an analysis that sought to establish possible connections between various disciplines and tried to constantly maintain a holistic perspective, making new connections and observing the issues from a new angle, apart from the already established methodologies. All this allowed to lay out the seeds for the development of a plan to tackle the critical points identified by the systemic analysis reported in this paper.

The aim of this study was to provide information on the levels of toxic (Cd and Pb) and essential (Cu, Fe and Zn) elements in cow’s milk produced in the State of Pernambuco (Brazil). A total of 142 samples of raw milk were collected, and the concentrations of essential and toxic elements were determined by inductively coupled plasma-optical emission spectrometry. In almost 30 % of the samples analyzed, the Pb content exceeded the maximum level established in the Brazilian legislation (0.05 mg/l). By contrast, in all samples the Cd content was below the maximum allowable level (0.02 mg/L). The essential trace elements Cu, Fe and Zn were generally present at lower concentrations than reported in other studies and can be considered within the deficient range for cow’s milk. Statistical and chemometric procedures were used to evaluate the main factors influencing the metal concentrations (proximity to major roads, presence of effluents, and milking method). The study findings demonstrate that the proximity of the farms to major roads influences the concentrations of Cd, Pb and Cu and that this is the main factor explaining the Pb content of milk. In addition, the presence of effluents influenced the concentrations of Cu, while no relationship between the metal content and the milking method was observed. Thus, in accordance with the study findings, consumption of cow’s milk produced in the region can be considered a risk to public health due to the high concentrations of Pb and the low concentrations of other essential minerals such as Cu, Zn and Fe in some of the milk samples.

There is only a very short reaction time for people to find the best way out of a building in a fire outbreak. Software applications can be used to assist the rapid evacuation of victims; however, this is an arduous task, which requires an understanding of advanced technologies. Since well-known pathway algorithms (such as, Dijkstra, Bellman-Ford and A*) can lead to serious problems over performance, we decided to make use of deep reinforcement learning techniques. A wide range of strategies including a random initialization of replay buffer and transfer learning were assessed in three projects involving schools of different sizes. The results showed the proposal was viable and that in most cases the performance of transfer learning was superior. In addition, the study raised challenges that had to be faced in the future.

2,4-dichlorophenoxyacetic acid (2,4-D) is a globally used herbicide and is frequently found in water samples. This fact has prompted studies on its effects in non-target organisms, revealing significant alterations on liver structure and function. In this review, we evaluated the literature on the hepatotoxicity of 2,4-D, focusing on morphological damages, biomarkers of toxicity and affected liver functions. Searches were conducted on PubMed, Web of Science and Scopus and 83 articles were selected after curation. Among the studies, 72% used in vivo models and 30% used in vitro models. Additionally, 48% used the active ingredient, and 35% used commercial formu-lations in exposure experiments. The most affected biomarkers were related to a decrease in an-tioxidant capacity, including alterations in the activities of catalase and superoxide dismutase, and in the levels of malondialdehyde. Changes in energy metabolism, lipids, liver function, and xenobiotic metabolism were also identified. Furthermore, we found studies about the effects of 2,4-D in mixtures with other pesticides, as well as hepatoprotection trials. The reviewed data in-dicate that the reduction in antioxidant capacity and oxidative stress play an important role in 2,4-D-induced hepatotoxicity. However, the mechanism of action of the herbicide is still not ful-ly understood and further research in this area is needed.

The global consumption of vegan foods is experiencing an expressive upward trend, underscoring the critical need for quality control measures based on nutritional and functional considerations. This study aimed to evaluate the functional quality of caviar and salmon analogs food inks, based on pulses combined with nano ingredients. The primary objective of this work was to determine the total antioxidant compounds contained in these samples using a voltammetric technique with a glassy carbon electrode. Approximately 100 mg of samples underwent ethanolic extraction (70%) with 1 hour of stirring. The voltammograms were acquired under specific conditions: 10 mL of phosphate buffer electrolyte with a pH of 3.0; an initial potential (Ei) of 0.0 V; a final potential (Ef) of 1.0 V; a pulse amplitude of 50 mV; and a scan rate of 50 mV s-1. The reference electrode used was Ag/AgCl (KCl 3 mol L-1), and the auxiliary electrode was a platinum wire. The voltammograms revealed prominent anodic current peaks at 0.76-0.78 V, which are attributed to isoflavones. Isoflavones, known secondary metabolites with substantial antioxidant potential commonly found in pulses, were identified. The total isoflavone concentrations obtained ranged from 31.5 to 64.3 mg Eq genistein 100 g-1. The results not only validated the efficacy of the electrochemical sensor for quantifying total antioxidant compounds in the samples but also demonstrated that the concentration of total isoflavones in caviar and salmon analogs fell within the expected limits.

Drivable area (DA) detection is crucial for autonomous driving. Camera-based methods heavily rely on lighting conditions and often fail to capture accurate 3D information, while LiDAR-based methods offer accurate 3D data and are less susceptible to lighting conditions. However, existing LiDAR-based methods focus on point-wise detection, prone to occlusion and limited by point cloud sparsity, leading to decreased performance in motion planning and localization. We propose Argoverse-grid, a grid-wise DA detection dataset derived from Argoverse 1, comprising over 13K frames with fine-grained BEV DA labels across various scenarios. We also introduce Grid-DATrNet, a first grid-wise DA detection model utilizing global attention through transformers. Our experiments demonstrate the superiority of Grid-DATrNet over various methods, including both LiDAR and camera-based approaches, in detecting grid-wise DA in the proposed Argoverse-grid dataset. We show that Grid-DATrNet can detect grids even in occluded and unmeasured areas by leveraging contextual and semantic information through global attention, unlike CNN-based DA detection methods. The preprocessing code for Argoverse-grid, experiment code, Grid-DATrNet implementation, and result visualization code will be made available at https://github.com/kaist-avelab/grid-wise-DA.

The Textile and Clothing (T\&C) value chain is one of the most polluting in the world and one that produces the most waste. It is, therefore, important to encourage the Circular Economy (CE) model in this sector, to reduce pollution and mitigate the effects of waste production, and consequently increase environmental sustainability. For that, the involvement of the final consumer is essential. And, the final consumer's use of an Eco-gamified application for registering and promoting Consumer-to-Consumer (C2C) and Consumer-to-Business (C2B) activities, which extends the life time of textile products, is of utmost importance. In this article, we survey gamification frameworks for analyzing system design level techniques that enable engaging the final consumer in the CE process. Then, we select and use one of such frameworks, Gameful Design Heuristics (GDH), for defining the gamification structure needed to implement on a Business-to-Consumer-to-Consumer (B2C2C) context of a circular economy. As result, we present a B2C2C circular business process model for the T\&C value chain, and propose the design model of a gamified platform for the final consumers, which allows them to register the C2B and C2C activities, from the circular value chain's business process, and benefit from a game-like experience. All model features have been mapped to GDH framework heuristics, validating that it is possible to support a set of defined heuristics of applied gamification for promoting CE in the T\&C value chain.

The Serra da Estrela Natural Park (NPSEs) in Portugal stands out as a well-preserved region abundant in medicinal plants, particularly known for their pharmaceutical applications in diabetes prevention and treatment. This comprehensive review explores these plants' botanical diversity, traditional uses, pharmacological applications, and chemical composition. The NPSEs boast a rich diversity with 138 medicinal plants across 55 families identified as traditionally and pharmacologically used against diabetes globally. Notably, the Asteraceae and Lamiaceae families are prevalent in anti-diabetic applications. In vitro studies reveal their significant inhibition of carbohydrate-metabolizing enzymes, and certain plant co-products regulate genes involved in carbohydrate metabolism and insulin secretion. In vivo trials demonstrate anti-diabetic effects, including glycaemia regulation, insulin secretion, antioxidant activity, and lipid profile modulation. Medicinal plants in NPSE exhibit various activities beyond anti-diabetic, such as antioxidant, anti-inflammatory, antibacterial, anticancer, and more. Chemical analysis identifies over fifty compounds like phenolic acids, flavonoids, terpenoids, and polysaccharides responsible for their efficacy against diabetes. The findings underscore the potential of NPSE medicinal plants as anti-diabetic candidates, urging further research to develop effective plant-based anti-diabetic drugs, beverages, and supplements.

The antioxidant activity of molecules constitutes an important factor for the regulation of redox homeostasis and reduction of oxidative stress. Cells affected by oxidative stress can undergo genetic alteration, causing structural changes and promoting the onset of chronic diseases, such as cancer. The in silico study performed here was developed to evaluate the antioxidant potential of two molecules, ZINC08706191 (Z91) and ZINC08992920 (Z20), with recognized epithelial anticancer potential. Molecular docking, chemical-quantum calculations and Pearson's correlation were performed. The Z91 and Z20 molecules showed lower binding free energy (ΔG) values for the receptor-ligand interaction than the reference molecules (caffeine – CAF and ascorbic acid – AA), and better results for values of molecular descriptors correlated with ΔG, resulting in a decrease of ΔG. Strong correlations were observed between ΔG values for the five receptors evaluated and ΔG values of the potential epithelial anticancer activity available in literature. These results attest to the significant antioxidant potential of the Z91 and Z20 molecules and their strong relation with the potential epithelial anticancer activity and may be indicated for further analysis in relation to the control of oxidative stress and epithelial anticancer activity.

Background: Tetanus is an acute, fatal disease caused by exotoxins released from Clostridium tetani during infections. A protective humoral immune response can be induced by vaccinations with pediatric and booster combinatorial vaccines that contain inactivated tetanus neurotoxin (TeNT) as a major antigen. Although some epitopes in NeNT have been described using various ap-proaches, a comprehensive list of its antigenic determinants that are involved with immunity have not been elucidated. To that end, a high resolution analysis of the linear B-cell epitopes in NeNT was performed using antibodies generated in vaccinated children. Methods: Two hundred sixty-four peptides that cover the entire coding sequence of TeNT protein were prepared in situ on a cellulose membrane by SPOT synthesis and probed with sera from children vaccinated (ChVS) with a triple DTP-vaccine to map continuous B-cell epitopes that were further characterized and validated by immunoassays. Results: Forty-three IgG epitopes were identified. Four (TT-215-218) were chemically synthesized as Multiple Antigen Peptides (MAPs) and used in peptide ELISAs to screen post-pandemic DTP vaccinations. The assay displayed a high performance with high sensitivity (99.99%) and specificity (100%). Conclusions: The complete map of linear IgG epitopes induced by vaccination with inactivated TeNT highlights three key epitopes involved in the ef-ficacy of the vaccine. Antibodies against epitope TT-8/G can block enzymatic activity, and those against epitopes TT-40/G and TT-42/G can interfere with TeNT binding to neuronal cell receptors. We further show that four of the epitopes identified can be employed in peptide ELISAs to assess vaccine coverage. Overall, the data suggest a set of select epitopes to engineer new, directed vaccines

Introduction: Leprosy, caused by Mycobacterium leprae is one of the oldest infectious diseases in human history and its eradication is linked to poverty control, lack of basic sanitation, the fragility of health, and education services. Objective: To evaluate the frequency of blood groups (ABO/Rh) and the sociodemographic and clinical profile of Angolan patients with Leprosy treated at the Anti-Tuberculosis and Leprosy Dispensary in Luanda, the capital city of Angola. Methodology: A descriptive, introspective, cross-sectional study with a quantitative approach was carried out with 102 patients of Luanda, in the second half of 2021. Results: Of the 102 patients included in the study, the majority belonged to the ORh+ group (51.9%), followed by the BRh+ group (27.4%) and ARh+ (18.6%), most were under 51 years of age ( 87.3%), with low education (54.9%), coming from urban areas (44.1%). As for clinical conditions, most had a multibacillary infection (93.1%), diagnosed mainly by smear microscopy (75.5%) without other infection (79.4%), some of them with complications (28.4%) and individuals with non-O blood group showed changes in the blood count. Conclusion: Leprosy seems to be common in ORh+ individuals, it continues to affect especially those residing in areas of population agglomerations and with low education, presenting itself as a multibacillary infection, where changes in the blood count are greater in non-O individuals.

The endocannabinoid system (eCB) began to be studied from the identification of the molecular structures present in the cannabis sativa plant. The ECS is constituted of cannabinoid receptors, endogenous ligands and all the associated enzymatic apparatus responsible for maintaining homeostasis. Several physiological effects of cannabinoids are exerted through interaction with various receptors such as CB1 and CB2 receptors, vanilloid receptors, and the recently discovered [GPCRs (GPR55, GPR3, GPR6, GPR12 and GPR19). Endogenous ligands such anandamide and 2-arachidonoylglycerol might modulate these receptors. eCB has proved to play a critical role in some human diseases and has been extensively studied due to its wide therapeutic potential and because it is a promising target for the development of new drugs. Phytocannabinoids and synthetic cannabinoids have shown varied affinities to eCB, which are relevant to the treatment of various diseases. They may also have potential as lead compounds in the development of cannabinoid-based pharmaceuticals for a variety of diseases. Furthermore, Integrative and Complementary Health Practices (ICHP) appear to influence the endocannabinoid system through modulation. This review will show a description of ECS components and discuss how phytocannabinoids, other exogenous compounds, and PICS may operate the eCB balance.

Fogo (Fogo island, Cape Verde Republic) is the youngest and most active volcano of the archipelago. The last eruption occurred in 2014–2015. Aiming at studying dust emissions and transport during the eruption period and assessing their impact on air quality and human health, a mineralogical and chemical characterization was undertaken in outdoor dust from all over the island, as well as in the lava resulting from this event. Air quality monitors were used to obtain concentrations of atmospheric particulate matter (PM) and gaseous pollutants. The mineralogical constitution of the samples was analysed by X-ray diffraction and Electron Microprobe, while the chemical characterization was performed through X-ray Fluorescence Spectrometry and ICP-MS. The volcanic rock was found to be tephritic to basanitic, with high potassium content. Several minerals were identified, such as titanian augite with ilmenite, basaltic hornblendes, pyrrhotites, apatites, pyroxenes, basaltic hornblendes and hematites. Concentrations of the particulate matter inhalable fraction (PM10) exceeded the 24-hour mean of 50 µg/m3 recommended by the World Health Organization. Nevertheless, total volatile organic compounds (TVOCs) showed levels lower than the worrying range. The highest levels of CO2 were recorded in more populated villages and farthest from the volcano. The Pollution Load Index (PLI) for outdoor dust collected on rooftops was always above 1, suggesting enrichment, with higher values in the dust size fraction < 63 µm. In the same way, the Contamination Factor pointed to high enrichment of As, Ni and Pb, and very high enrichment of Cd in the same size fraction. The Non-carcinogenic Hazard Quotient and Hazard Index estimated for Children suggest that health problems may arise. The Carcinogenic Risk, for all size fractions, was above the target risk. The element that most contributed to the global risk was As, followed by Pb and Co. Ingestion was the main exposure route for all size fractions. The dust size fraction that represented the highest risk was < 63 µm, mostly due to the As concentration.

The structure of wound dressing materials presents one of the most relevant characteristics for effective skin tissue repair. Electrospinning is a common technique used to produce polymeric fibres that can mimic fibrillar disposition of skin extracellular matrix, favouring cell migration, and thus regeneration of the damaged tissue. Moreover, beads, also known as by-products of electrospinning, have potential as reservoirs for sustained drug release. Processing parameters, such as molecular weight and viscosity of the polymer solution, can affect the desirable morphologies of electrospun films. Thereby, this work had the purpose of producing and characterized electrospun polycaprolactone (PCL) mats loaded with propolis, a popular extract in traditional medicine with potential for skin repair aid. Films with different morphologies were obtained depending on the storage period of the solution prior to the lectrospinning, probably due to the PCL hydrolysis. FTIR analyses of the extract confirmed propolis composition. GPC and viscosity analyses demonstrated that the decrease in molar mass over the storage period was responsible for nanostructure diversity. Propolis acts as a lubricant agent, affecting the spun solutions' viscosity and the thermal properties and hydrophilicity of the films. All films are within the value range of the water vapour transpiration rate of the commercial products. The presence of beads did not affect the propolis release pattern. However, "in vitro" wound healing assay showed that propolis-loaded films composed by beaded fibres increased the cell migration process. Thus, it can be inferred that these films presented the potential for wound dressing application.

Dipteryx spp. is an important species in reforestation in the Amazon. The objective of this study is to characterize and compare the relationships between dendrometric variables in Dipteryx spp. stands in the Western Amazon by fitting linear regression equations for total height and crown diameter. Six forest stands were evaluated in three municipalities. Dendrometric variables collected included diameter at 1.3 m height (dbh), total height (ht) and crown diameter (dc). Simple and multiple linear regression equations were fitted to characterize the relationships between ht and dc. The total aboveground biomass of Dipteryx spp. trees and the carbon stock of the stands were estimated. The general equations showed higher R² values, exceeding 0.7. The general equations for estimating ht and dc were significant for all coefficients. The trees averaged 22 t/ha of aboveground biomass in the stands. There was a variation in carbon sequestration potential among stands, ranging from 5.12 to 88.91 t CO2.ha-1. Single-input equations using dbh as an independent variable are recommended for estimating dc and ht for individual Dipteryx spp. stands. Stands in the Western Amazon play a significant role in carbon sequestration and accumulation. Trees can sequester an average of 4.8 tons of CO2 per year.

The capacitated lot-sizing problem with product recovery (CLSP-RM) holds significant importance in reverse logistics but is notoriously complex (NP-hard). In this study, two techniques are introduced to confront this challenge. The first technique entails devising a linear optimization task that eliminates capacity limitations across a wide problem spectrum, yielding a remarkably accurate approximation of the optimal solution. This adaptable approach presents a potent alternative and holds potential for extension to diverse problem categories owing to its versatile nature. The second technique employs a simulation methodology utilizing Halton’s uniform random numbers to address the issue. This randomized production search method sidesteps considerations of production costs, inventory expenditures, and production order when determining production batches. The research’s novelty lies in its application of these techniques to the problem. The suggested methods undergo evaluation via a benchmark dataset of approximately 4200 instances, with comparison against solutions derived through the Gurobi solver. The results underscore the efficacy and resilience of the introduced methodology in tackling the CLSP-RM predicament.

This work aims to investigate systematically the influence of process temperature and biomass-to-water ration on the chemical composition of aqueous and gaseous phases and mass production of chemical by hydrothermal processing of Açaí (Euterpe Oleraceae, Mart.) seeds. The hydrothermal carbonization carried out at 175, 200, 225, and 250 °C, 2 °C/min, biomass-to-water ratio of 1:10, and at 250 °C, 2 °C/min, and biomass-to-water ratios of 1:10, 1:15, and 1:20, in technical scale. The chemical composition of aqueous phase determined by GC and HPLC and the volumetric composition of gaseous phase by using an infrared gas analyzer. For constant biomass-to-water ratio of 1:10, the yields of solid, liquid, and gaseous phases varied between 53.39 and 37.01% (wt.), 46.61 and 59.19% (wt.), and 0.00 and 3.80% (wt.), respectively. The yield of solids shows a smooth exponential decay with temperature, while that of liquid and gaseous phases a smooth growth. By variation of biomass-to-water ratios, the yields of solid, liquid, and gaseous reaction products varied between 53.39 and 32.09% (wt.), 46.61 and 67.28% (wt.), and 0.00 and 0.634% (wt.), respectively. The yield of solids decreases exponentially with increasing water-to-biomass ratio and that of liquid phase increases in a sigmoid fashion. For constant biomass-to-water ratio, the concentrations of Furfural and HMF decrease drastically with temperature, reaching a minimum at 250 °C, while that of phenols increases. In addition, the concentrations of CH3COOH and total carboxylic acids increase, reaching a maximum at 250 °C. For constant process temperature, the concentrations of aromatics vary smoothly with the temperature. The concentrations of furfural, HMF, and cathecol decrease with temperature, while that of phenols increases. The concentrations of CH3COOH and total carboxylic acids decrease exponentially with temperature. Finally, for the experiments with varying water-to-biomass ratios, the productions of chemicals (furfural, HMF, phenols, cathecol, and acetic acid) in the aqueous phase is highly dependent on the biomass-to-water ratio.

The present study explored the expression of CD62L and CD44 by bovine peripheral blood mononuclear cells (PBMCs) and WC1.1+ γδ T cells under Staphylococcus aureus cell culture stimu-lation. In this study, peripheral blood cells were isolated from ten dairy cows and cocultured with S. aureus. Afterward, the γδ T cell subpopulation and the expression of CD44, CD62L and prolif-erative (Ki67+) cells were evaluated by flow cytometry. Our results showed that the percentages of proliferative PBMCs and WC1.1+ γδ T cells were higher when stimulated with S. aureus. The percentage of CD44+ cells increased in S. aureus-stimulated cultured PMBCs and WC1.1+ γδ T cells, as did the CD44 geometric mean fluorescence intensity (GMFI). The rate of CD62L cells did not differ among groups for either PBMCs or WC1.1+ γδ T cells. A higher GMFI of CD62L in prolif-erative PBMCs than nonproliferative PBMCs upon stimulation with S. aureus was detected, whereas no impact on the GMFI of CD62L was observed in WC1.1+ cells. In summary, our study identified that S. aureus was associated with high expression of CD44 in overall PBMCs and WC1.1+ γδ T cells, and they could generate memory WC1.1+ γδ T cells, preferably central memory cells.

The air is a fundamental element for the life on Earth. Rapid urbanization and industrialization release large amounts of pollutants (harmful gases, microorganisms, and particulate matter, among others) into the atmosphere, leading to health hazards. Air filtration is still the most used and promising technique for protecting air against pollutants. The quality and efficiency of filtering process are dependent of material used for the filter and other filter’s properties. Several methods can be used for manufacturing filters, one of them uses fibrous membranes obtained through electrospinning from polymeric solutions. Electrospinning is a technique that combines the application of an electrostatic field to a moving fluid which results in the fibers formation. Electrospun membranes are constituted by fibers that the sizes spread on submicro and or nanometric scales. This review focuses on fiber membranes obtained by electrospinning for filtration of particulate matter. It is addressed the effect of solution, processing and ambient parameters on the morphology and dimensional characteristics of fiber membranes. The basic principles of air filtration and test and characterization of filter performance are presented. The research progress on electrospun nanofibers as air filters in recent years is summarized and examined. Finally, conclusion and future perspectives in electrospun fibers for air filtration are provided and discussed.

With data for SARS-CoV-2 and with many countries entering the second wave of contagion required the improvement of the forecasting model, structuring its model to forecast the peak of the first and second contagion wave in Brazil. The Model Estimation for SARS-CoV-2 Peak Contagion (MESPC) was structured, capable of estimating the peak of contagion for SARS-CoV-2 in the first and second waves, as the main objective of this work. Using the MESPC model, it was possible to estimate, with a certain reliability degree, the peak of contagion for the first and second waves in Brazil, with one day difference from the real to the forecast. It is possible to use MESPC to forecast the peak of contagion for several regions, provided that the necessary structure and calibration are respected.

Cherries have been largely investigated due to their high content in phenolics in order to fully ex-plore their health-promoting properties. Therefore, this work aimed to assess, for the first time, the anti-inflammatory potential of phenolic-targeted fractions of Saco cherry, using RAW 264.7 mac-rophages stimulated with lipopolysaccharide. Additionally, the cytotoxic effects on gastric ade-nocarcinoma (AGS), neuroblastoma (SH-SY5Y) and normal human dermal fibroblast (NHDF) cells were evaluated, as well as the ability to protect these cellular models against induced oxidative stress. The obtained data revealed that cherry fractions can interfere with cellular nitric oxide (NO) levels by capturing NO radicals and decreasing inducible nitric oxide synthase and cyclooxygen-ase-2 expression. Furthermore, it was observed that all cherry fractions exhibited dose-dependent cytotoxicity against AGS cells, presenting cytotoxic selectivity for these cancer cells when compared to SH-SY5Y and NHDF cells. Regarding their capacity to protect cancer cells against oxidative injury, in most assays, the total cherry extract was the most effective. Overall, this study reinforces the sweet cherries incorporation in new pharmaceutical products, smart foods and nutraceuticals.

In this work, it is analyzed a Digital Signal Processor, DSP, based One Cycle Control, OCC, strategy for a Power Factor Corrector, PFC, rectifier, which presents Common-mode Voltage, CMV, immunity. The proposed strategy utilizes an emulated-resistance-controller in closed-loop configuration to set up dc-link voltage and achieve unity power factor, UPF. It is shown that if PFC can achieve UPF condition and if phase voltage is only affected by CMV, then phase current is free from CMV, as well as a lead-lag compensator, LLC, to average phase current. Another possible condition is also analyzed. The proposal is verified by simulation and experiments.

Metastatic melanoma patients have a poor prognosis with poor responsiveness to chemotherapy. BRAF V600E mutations have been detected in ~40% of melanoma patients. Vemurafenib is an oral agent licensed for patients with BRAF V600E mutation-positive inoperable and metastatic melanoma, which already presents resistance that leads to patient relapse and the serious side effects. In our study, we synthesized 5 new vemurafenib analogs, RF-86A, RF-87A, RF-94A, RF-94B and RF-96B, with structural improve-ments, in order to increase the anti-proliferative and anti-metastatic effect on human melanoma. We showed that the analogs were efficient in inducing cell death and reducing the migration of A375 cells, by inhibition of MMP-2 and MMP-9 activity, indicating that this action may be longer lasting comparing to the action of Vemurafenib.

Dental implants provide a predictable treatment option for partial and complete edentulism via the placement of fixed permanent artificial root to support prosthetic dental crowns. Despite the high survival rates, long-term implant failures are still reported leading to implant removal and additional financial and health burdens. While extrinsic factors that improve survival rate of implants have been well explored, the impact of genetic factors on this matter is poorly understood. A systematic review and meta-analysis study was conducted to determine whether genetic factors contribute to increase the risk of dental implant failure. A comprehensive search for peer-reviewed articles on dental implants and genetics was performed using various literature database libraries. The study design was conducted according to PRISMA guidelines, and the obtained records were registered in PROSPERO database. According to the exclusion/inclusion criteria, 11 studies were eligible for this study out of 808 articles. The meta-analysis of the combined association studies of DNA variations and dental implants did not indicate an increase risk for implant failure due to DNA variations in IL-1B, IL-10 and TNF-α. This study emphasizes the need for larger randomized controlled clinical trails to inform clinicians and patients about the role of genetic factors on dental implant survival and success rate in healthy and compromised patients.

The use of plant growth-promoting bacteria can be one option for mitigating the impact of abiotic constraints on different cropping systems in the tropical semi-arid region. The aim of this study was to evaluate growth, leaf gas exchange and yield in maize inoculated with Bacillus aryabhattai, and subjected to water and salt stress. The experiment followed a randomised block design, in a split plot arrangement, with six repetitions. The plots comprised two levels of electrical conductivity for the irrigation water (ECw): 0.3 dS m-1 and 3.0 dS m-1; the subplots consisted of three irrigation depths (ID1: 50%, ID2: 75%, and ID3: 100% of the crop evapotranspiration (ETc)); while the sub-subplots included the presence or absence of Bacillus aryabhattai inoculant. A water deficit of 50% of the ETc resulted in the principal negative effects on growth, reducing the leaf area and stem diameter. The use of Bacillus aryabhattai mitigated salt stress and promoted better leaf gas exchange by increasing the CO2 assimilation rate, stomatal conductance, and internal CO2 concentration. However, irrigation with brackish water (3.0 dS m-1) reduced the instantaneous water use efficiency of the maize. Inoculation partially reduced the effects of abiotic stress due to morpho-physiological traits, and increased yield potential under water deficit with no salt stress.

Mimosa acutistipula is endemic to Brazil and grows in ferruginous outcrops (canga) in Serra dos Carajás, eastern Amazon, where one of the largest iron ore deposits in the world is located. Plants that develop in these ecosystems are subject to severe environmental conditions and must have adaptive mechanisms to grow and thrive in cangas. Mimosa acutistipula is a native species used to restore biodiversity in post-mining areas in canga. Understanding the molecular mechanisms involved in the adaptation of M. acutistipula in canga is essential to deduce the ability of native species to adapt to possible stressors in rehabilitating minelands over time. In this study, the root proteomic profiles of M. acutistipula grown in a native canga ecosystem and rehabilitating minelands were compared to identify essential proteins involved in the adaptation of this species in its native environment and that should enable its establishment in rehabilitating minelands. The results showed differentially abundant proteins, where 436 proteins with significant values (p < 0.05) and fold change ≥ 2 were more abundant in canga and 145 in roots from the rehabilitating minelands. Among them, a representative amount and diversity of proteins were related to responses to water deficit, heat, and responses to metal ions. Other identified proteins are involved in biocontrol activity against phytopathogens and symbiosis. This research provides insights into proteins involved in M. acutistipula responses to environmental stimuli, suggesting critical mechanisms to support the establishment of native canga plants in rehabilitating minelands over time.

Background: School meals represent a significant supply of nutrients for children in Brazil, especially those in conditions of social vulnerability. Objectives: This study aimed to assess the levels of arsenic (As), cadmium (Cd), and lead (Pb) in meals served in public elementary schools in four municipalities in the state of Bahia, Brazil, and assess the risk posed to children's health. Methods: Ninety-six samples were collected from 16 schools, freeze-dried, and subjected to microwave-assisted digestion. The As, Cd, and Pb levels were determined by graphite furnace atomic absorption spectrometry. The risk assessment was based on calculating each element's hazard quotient (HQ). Results: None of the samples reached or exceeded the tolerable levels for the elements analyzed. Pb was the metal that obtained the most significant result, reaching maximum levels of 39-157 µg.kg-¹. Conclusions: No element exceeded the PTWI proposed by JECFA; thus, the toxic metal content in school meals poses a negligible risk to children´s health.

This work aims to investigate the effect of process temperature and catalyst content by pyrolysis and thermal catalytic cracking of (organic matter + paper) fraction from municipal household solid waste (MHSW) on the yields of reaction products (bio-oil, bio-char, H2O, and gas), acid value and chemical composition of bio-oils, and characterization of bio-chars, in laboratory scale. The collecting sectors of MHSW in the municipality of Belém-Pará-Brazil were chosen based on geographic and socio-economic database. The MHSW collected and transported to the segregation area. The gravimetric analysis of MHSW carried out and the fractions (Paper, Cardboard, Tetra Pack, Hard Plastic, Soft Plastic, Metal, Glass, Organic Matter, and Inert) separated. The selected organic matter and paper submitted to pre-treatment of crushing, drying, and sieving. The experiments carried out at 400, 450, and 475 °C and 1.0 atmosphere, and at 475 °C and 1.0 atmosphere, using 5.0, 10.0, and 15.0% (wt.) Ca(OH)2, in batch mode. The bio-oil characterized for acid value. The chemical functions present in bio-oil identified by FT-IR and the composition by GC-MS. The bio-char characterized by SEM, FT-IR and XRD. The variance in mass (wt.%) for organic fraction of municipal household solid waste, between 56.21 and 67.45% (wt.), lies with the interval of 56% (wt.) and 64% (wt.) of OFMHSW for middle and low income countries. The pyrolysis of MHSW fraction (organic matter + paper) show bio-oil yields between 2.63 and 9.41% (wt.), aqueous phase yields between 28.58 and 35.08% (wt.), solid phase yields between 35.29 and 45.75% (wt.), and gas yields between 16.54 and 26.72% (wt.). The bio-oil yield increases with pyrolysis temperature. For the catalytic cracking, the bio-oil and gas yields increase slightly with CaO content, while that of bio-char decreases, and the H2O phase remains constant. The GC-MS of liquid reaction products identified the presence of hydrocarbons (alkanes, alkenes, alkynes, cycloalkanes, and aromatics) and oxygenates (carboxylic acids, ketones, esters, alcohols, phenols, and aldehydes), as well as compounds containing nitrogen, including amides and amines. The acidity of bio-oil decreases with increasing process temperature and with aid Ca(OH)2 as catalyst. The concentration of hydrocarbons in bio-oil increases with increasing Ca(OH)2-to-MHSW fraction ratio due to the catalytic deoxygenation of fatty acids molecules, by means of de-carboxylation/de-carbonylation, producing aliphatic and aromatic hydrocarbons.

Water deficit greatly affects global crop growth and productivity, particularly in water-limited environments like upland rice cultivation, leading to reduced grain yield. Plants activate various defense mechanisms during water deficit, involving numerous genes and complex metabolic pathways. Exploring orthologous genes, linked to enhanced drought tolerance, can aid functional validation in target species using genomic data from model organisms. Here, we studied the OsCPK5 gene in upland rice, an AtCPK6 ortholog from A. thaliana, by overexpressing it in the BRSMG Curinga cultivar. Transformants were assessed under two conditions: water deficit applied 79 days after seeding, lasting 14 days, followed by 7 days of irrigation at 80% field capacity. Physiological data and samples were collected at R3, R6, and R8 stages. GM plants consistently exhibited higher OsCPK5 gene expression across stages, peaking during grain filling. During this phase, GM plants displayed reduced stomatal conductance, photosynthetic rate, and increased water use efficiency compared to non-GM plants under drought. GM plants also exhibited higher filled grain percentage in both irrigation conditions. Their drought susceptibility index was 0.9 times lower than NGM plants, and they maintained a higher chlorophyll a/b index, indicating sustained photosynthesis. NGM plants under water deficit exhibited more leaf senescence, while OsCPK5-overexpressing plants retained green leaves. Overall, OsCPK5 overexpression induced diverse drought tolerance mechanisms, hinting at potential for future development of more drought-tolerant rice cultivars.

Objective: To report time-loss match injuries in Portugal’s “Divisão de Honra” (Portuguese First Tier) 2022/23 season focusing on injury incidence, injury burden, anatomical region and type of injury. Methods: A cohort prospective observational study was conducted. Data was collected through an online form sent for every team medical department categorizing player position, injury type, location and severity. Injury incidence and burden were calculated per 1000-player-match-hours. Results: The overall injury incidence was 54.4 injuries per 1000 player-match-hours (CI95% 30.3-96.2). Forwards had a higher incidence comparing to backs. Lower limbs were the most affected location (52% of the injuries). Sprain/ligaments injuries were the most common type of injury followed by muscle injuries. Discussion: The injury incidence was higher than what is reported in amateur competitions and lower than professional ones. Injury severity was similar to other studies. Our study suggests a lower injury burden compared to other semi-professional and elite leagues. Further research with broader participation and training injury data is needed.

Tuberculosis (TB) is an airborne infectious disease caused by organisms in the Mycobacterium tuberculosis (Mtb) complex. In many low and middle-income countries, TB remains a major cause of morbidity and mortality. Once a patient has been diagnosed with TB, it is critical that healthcare workers make the most appropriate treatment decision given the individual conditions of the patient and the likely course of the disease based on medical experience. Depending on the prognosis, delayed or inappropriate treatment can result in unsatisfactory results including the exacerbation of clinical symptoms, poor quality of life, and increased risk of death. This work benchmarks machine learning models to aid TB prognosis using a Brazilian health database of confirmed cases and deaths related to TB in the State of Amazonas. The goal is to predict the probability of death by TB thus aiding the prognosis of TB and associated treatment decision making process. In its original form, the data set comprised 36,228 records and 130 fields but suffered from missing, incomplete, or incorrect data. Following data cleaning and preprocessing, a revised data set was generated comprising 24,015 records and 38 fields, including 22,876 reported cured TB patients and 1,139 deaths by TB. To explore how the data imbalance impacts model performance, two controlled experiments were designed using (1) imbalanced and (2) balanced data sets. The best result is achieved by the Gradient Boosting (GB) model using the balanced data set to predict TB-mortality, and the ensemble model composed by the Random Forest (RF), GB and Multi-layer Perceptron (MLP) models is the best model to predict the cure class.

Traditional population-based metaheuristic algorithms are effective in solving complex real-world problems but require careful strategy selection and parameter tuning. Parameter-less population-based optimization algorithms have gained importance due to their simplicity and efficiency. However, research on their applicability for solving large systems of nonlinear equations is still incipient. In this paper, a systematic review and detailed description of metaphor-less optimization algorithms is made, including the Jaya algorithm, the main Jaya variants for continuous optimization problems, with a focus on the Enhanced Jaya (EJAYA) algorithm, the three Rao algorithms, the best-worst-play (BWP) algorithm, and the very recent max-min-greedy-interaction (MaGI) algorithm. This paper also discusses a few previous parallelizations of the Jaya optimization algorithm, as well as recent GPU-based massively parallel implementations of the Jaya, Enhanced Jaya (EJAYA), Rao, and BWP algorithms developed by the authors. In addition, a novel GPU-accelerated version of the MaGI algorithm is proposed. The GPU-accelerated versions of the metaphor-less algorithms developed by the authors were implemented using the Julia programming language and tested primarily on GeForce RTX 3090 and NVIDIA A100 GPUs, as well as on Tesla V100S and Tesla T4 GPUs, using a set of difficult, large-scale nonlinear equation system problems. The computational experiments carried out produced quite significant speedups, which highlights the efficiency of the GPU-based versions of the metaphor-less algorithms developed for solving large-scale systems of nonlinear equations.

Dioclea apurensis Kunth is native to ferruginous rocky outcrops (known as canga) in the eastern Amazon. Native cangas are considered hotspots of biological diversity and have one of the largest iron ore deposits in the world. There, D. apurensis can grow in post-mining areas where molecular mechanisms and rhizospheric interactions with soil microorganisms are expected to contribute to their establishment in rehabilitating minelands. In this study, we compare the root proteomic profile and rhizosphere-associated bacterial and fungal communities of D. apurensis growing in canga and a rehabilitating mineland to characterize the main mechanisms that allow the growth and establishment in post-mining areas. The results showed that proteins involved in response to oxidative stress, drought, excess of iron, and phosphorus deficiency were more accumulated in canga and, therefore, helped explain its high establishment rates in rehabilitating minelands. Rhizospheric selectivity of microorganisms was more evident in canga. The microbial community structure was mostly different between the two habitats, denoting that despite having its preferences, D. apurensis can associate with beneficial soil microorganisms without specificity. Therefore, its good performance in rehabilitating minelands can also be improved or attributed to its ability to cope with beneficial soil-borne microorganisms. Native plants with such adaptations must be used to enhance the rehabilitation process.

The genus Naegleria, of free-living amoeba (FLA) group, has been investigated mainly due to its human health impact resulting in deadly infections and their worldwide distribution on freshwater systems. Naegleria fowleri, colloquially known as the “brain-eating amoeba”, is the most studied Naegleria species because it causes Primary Amoebic Meningoencephalitis (PAM) of high lethality. The assessment of FLA biodiversity is fundamental to evaluate the presence of pathogenic species and the possibility of human contamination. However, the knowledge of FLA distribution in Brazil is unknown, and to rectify this situation we present a research on identifying Naegleria spp. in the Monjolinho River, as a model study. The river is a public Brazilian freshwater source that crosses the city of São Carlos. Five distinct sampling sites were examined through limnological features, trophozoites culturing and PCR against internal transcribed spacers (ITS) regions and 5.8S rRNA sequence. The results identified N. philippinensis, N. canariensisi, N. australiensis, N.gruberi, N. dobsoni sequences, as well as a Vahlkampfia sequence. The methodology delineated here represents the first Brazilian Naegleria spp. study on a freshwater system. Our result stresses the urgency of a large scale evaluation of the presence of free-living amoebas in Brazil.

This study evaluated the microbiological quality of farm oysters, cultivated in an estuary in northeastern Pará, Brazil, before and after purification process. Water and oyster samples were collected in June, August, October, and December 2019. Oysters underwent purification for up to 36 h in a small-scale adapted debugger. Microbiological analyses were performed in oysters and water depuration collected at different times of purification (0 h pre-treatment, 6 h, 12 h, 2 4h, and 36 h), using the multiple tube technique, to determine the most probable number (MPN) of Escherichia coli, thermotolerant coliforms - TTC, and total coliforms - TC. Bacterial isolation was used to determine the presence of Salmonella spp. Before purification, oysters had E. coli counts above the limit allowed by Brazilian legislation (≤ 230 MPN/100g). High TTC, and TC counts were observed in all the months of the study, and Salmonella spp. was present in August. All water samples were contaminated by TTC beyond the level allowed (> 43 MPN/100mL) in two months. The purification process of 36 h was effective in reducing the load of E. coli, TTC, and TC and eliminating Salmonella spp. in oysters.

This work aims to investigate systematically the tecno-economic feasibility of ther-mos-catalytic cracking process for two solid waste materials, a lipid-base material (re-sidual fat/scum from retention box of the University Restaurant of UFPA) and a lig-nin-cellulosic material Açaí seed (Euterpe oleracea. Mart). The thermo-catalytic process-es were carried out in pilot scale (THERMTEK/LEQ/UFPA/IME/RJ), and their economic feasibility analyzed. The yields of biofuels produced by fractional distillation were al-so studied. The physicochemical characteristics of the raw materials, the organic liquid product (bio-oil) and the chemical composition of kerosene, light-diesel and heavy-diesel from the lipid-base material, as well as those of kerosene and light-diesel from the Açaí seed were also determined. The economic indicators for the evaluation of the most viable cracking (pyrolysis) and distillation process of bio-oils were: a) the sim-ple payback criterion, b) discounted payback, c) net present value (NPV), d) internal rate of return (IRR), and e) index of profitability (IP). The analysis of the indicators showed the economic viability of crude palm oil (Elaeis guineensis, Jacq) and unfeasibil-ity for the palm oil neutralization. The minimum fuel selling price (MFSP) obtained is this work for the biofuels was of 1.34 US$/L) and the breakeven point obtained was of 1.28 US$/L. The sensibility analysis demonstrated that the pyrolysis and distillation yields are the most important variables to affect the minimum fuel selling price (MFSP).

Plantago major L. is a worldwide available plant that has been used traditionally for several medical application due to its properties such as wound healing, anti-inflammatory, antimicrobial etc. This work aimed to develop and evaluate nanostructured PCL electrospun dressing with P. major extract encapsulated in nanofibers for application in wound healing. The extract from leaves was obtained by extraction in a mixture of water:ethanol= 1:1 of the freeze-dried extract presented a minimum inhibitory concentration (MIC) for Staphylococcus Aureus susceptible and resistant to methicillin of 5.3 mg/mL, a high antioxidant capacity, but a low content of total flavonoids. Electrospun mats without defects were successfully produced using two P. major extract concentrations based on MIC value. The extract incorporation in PCL nanofibers was confirmed by FTIR and contact angle measurements. The PCL/P. major extract was evaluated by DSC and TGA demonstrating that incorporation of the extract decreases the thermal stability of the mats as well as the degree of crystallinity of PCL-based fibers. The P. major extract incorporation on electrospun mats produced a significant swelling degree (more than 400%) and increased the capacity of adsorbing wound exudates and moisture, important characteristics for skin healing. The extract-controlled release evaluated by in vitro study in PBS (pH, 7.4) shows that P. major extract delivery from the mats occurs in the first 24 h, demonstrating their potential capacity to be used in wound healing.

The effects of 0.4wt.% Sc addition on a typical Al-Si10-Mg alloy were systematically investigated in the present research. Samples with and without Sc produced refined dendritic arranged microstructures with sensitivity to the aging treatment after solidification, particularly in the case of the alloy without Sc. After being exposed to 300°C for 90 minutes, the dendritic spacing nearly doubled in the Al-10wt.%Si-0.45wt.%Mg samples. The rapidly solidified microstructures were constituted by the -Al dendritic phase surrounded by eutectic phases/intermetallics such as Si, Mg2Si and Al3Sc (in the case of the alloy containing Sc). 255°C and 300°C were deemed most appropriate temperatures for aging treatments, with four exposure times of up to 120 minutes tested for each alloy. The heat treatments allowed the Vickers hardness profiles to be plotted and compared. Moreover, in order to detect both Sc- and Mg- precipitates after aging, specific samples have been prepared for either SEM or TEM analyses. At first, the results pointed to a strong precipitate-related hardening effect formed as a result of the Sc addition to the alloy. All samples containing Sc showed a higher hardness value when compared to their respective treated samples without Sc. Secondly, when comparing the Al-10Si-Mg-Sc alloy samples among themselves after being treated at different conditions, high temperatures and excessive treatment times can become detrimental to the hardness. This was due to the growth of larger Sc-bearing precipitates of approximately 1 µm in size under such conditions, having less pronounced hardening effect. The best condition (255°C for 60 min) for as centrifuged samples in Cu-mold produced very fine dispersion of Mg- and Sc- intermetallics (~200 nm in size) with a peak hardness of 110 HV.

This study identified and mapped worldwide surveillance actions and initiatives of drinking water quality implemented by government agencies or public health services. The scoping review was conducted between July 2021 and August 2022 based on the Joanna Briggs Institute. The search was performed in relevant databases and grey literature; 49 studies were obtained. Quantitative variables were presented as absolute and relative frequencies, while qualitative variables were analyzed using the IRaMuTeQ software. The actions developed worldwide and their impacts and results provided four thematic classes: (1) assessment of coverage, accessibility, quantity, and drinking water quality in routine and emergency situations; (2) analysis of physical-chemical and microbiological parameters in public supply networks or alternative water supply solutions; (3) identification of household water contamination, communication, and education with the community; (4) and investigation of water-borne disease outbreaks. Preliminary results were shared with stakeholders to favor early knowledge dissemination.

The current management of colorectal cancer liver metastasis (CRCLM) patients involves a multidisciplinary approach with surgical resection remaining the primary curative option. The advances in liver surgery have improved outcomes, enabling more patients to undergo surgery successfully. In addition, the development of imaging software has improved the preoperative planning and patient selection for surgery and other interventions. Systemic therapies, such as targeted therapies and immunotherapies have enhanced the chances of complete resection. Targeted agents in combination with chemotherapy, have shown efficacy in downstaging tumors and increasing resectability.

The first treatments with dental implants had low success rates (75%). Nowadays, oral rehabilitation with titanium dental implants has a high success rate (95-98%). The success rate significantly increases due to increased scientific knowledge about osseointegration, changes in surgical techniques, and the development of implant surface treatments. Despite the high success rate of implants, no protocol defines the time for the prosthesis to be installed and loaded after surgery. This work compares a new dental implant's primary (mechanical) and secondary (osseointegration) stability. Dental implant with micro- and nano-roughness surface was placed in 24 patients with a minimum of 35 N.cm and a maximum of 60 N.cm. Primary stability was quantified with a torque wrench and Ostell Mentor. The secondary stability 45 and 60 days after surgery was measured with Ostell. The results showed no statistical difference in secondary stability at 45 and 60 days postoperatively among implants. The success rate of dental implants can be associated with the surface morphology with micro and nano-roughness and the shape of the fillets of the implant threads. When the manufacturer's guidelines are followed, it is possible to prosthetically rehabilitate the patient with an implant 45 days after surgery.

Mining interspecies interactions remain a challenge due to the complex nature of microbial communities and the need for computational power to handle big data. Our meta-analysis indicates that genetic potential alone does not resolve all issues involving mining of microbial interactions. Nevertheless, it can be used to define the building blocks to infer synergistic interspecies interactions and to limit the search space (i.e., number of species and metabolic reactions) to a manageable size. A reduced search space decreases the number of additional experiments necessary to validate the inferred putative interactions. As validation experiments, we examine how multi-omics and state of the art imaging techniques may further improve our understanding of species interactions’ role in ecosystem processes. Finally, we analyze pros and cons from the current methods to infer microbial interactions from genetic potential and propose a new theoretical framework based on: (i) genomic information of key members of a community; (ii) information of ecosystem processes involved with a specific hypothesis or research question; (iii) the ability to identify putative species’ contributions to ecosystem processes of interest; and, (iv) validation of putative microbial interactions through integration of other data sources.

Nowadays, the growing concern about improving thermal comfort in textiles, asphalt pavements and buildings has stimulated research into phase change materials (PCMs). However, the incorporation of PCMs directly causes mechanical impacts. Therefore, this study herein reported focuses on designing coaxial phase change fibres using commercial cellulose acetate (CA) or recycled CA obtained from cotton fabrics (CAt) as a coating and polyethylene glycol (PEG) 2000 as a core. The phase change fibres (PCF) were produced by wet spinning, varying the parameters: (i) CA concentration, molecular weight and source (virgin versus recycled); and (ii) PEG concentration and ejection. For phase change recycled fibres (PCFt), PEG concentration and ejection were varied. The fibres were assessed for their optical, chemical, thermal and mechanical properties. Bright-field microscopy images and Scanning Electron Microscopy (SEM) micrographs proved the coaxial structure. Fourier Transform Infrared spectroscopy (FTIR) confirmed the presence of PEG in the core. Thermogravimetric Analysis (TGA) proved the ability of PCFs to tolerate high temperatures. Differential Scanning Calorimetry (DSC) attested to the presence of PEG2000 peaks, since their melting points were close to those of virgin PEG2000, with a slight change in the PCFs and PCFts caused by the protective sheath of CA and CAt.

Serotonergic neurons constitute one of the main systems of neuromodulators, whose diffuse projections regulate the functions of the cerebral cortex. Serotonin (5-HT) is known to play a crucial role in the differential modulation of cortical activity related to behavioral contexts. Certain aspects of the 5-HT signaling framework hint at its potential role as a modulator of activity-dependent synaptic changes within the critical period of the primary visual cortex (V1). Cells of the serotonergic system are among the first neurons to differentiate and operate. During postnatal development, ramifications from raphe nuclei become massively distributed in the visual cortical area, remarkably increasing the availability of 5-HT for the regulation of excitatory and inhibitory synaptic activity. A substantial amount of evidence has demonstrated that synaptic plasticity at pyramidal neurons of the superficial layers of V1 critically depends on a fine regulation of the balance between excitation and inhibition (E/I). Therefore, 5-HT could play an important role in controlling this balance, providing the appropriate excitability conditions that favor synaptic modifications. In order to explore this possibility, the present work used in vitro intracellular electrophysiological recording techniques to study the effects of 5-HT on the E/I balance of V1 layer 2/3 neurons, during the critical period. Serotonergic modulation of the E/I balance has been analyzed on spontaneous activity, evoked synaptic responses, and long-term depression (LTD). Our results pointed out that the predominant action of 5-HT implies a reduction of the E/I balance. 5-HT promoted LTD at excitatory synapses while blocking LTD at inhibitory synaptic sites, thus shifting the Hebbian alterations of synaptic strength towards lower levels of E/I balance.

Aging is a complex process associated with tissue degeneration and an increased risk of age-related diseases. This study aimed to evaluate the impact of Terasen®, a nutraceutical containing standardized extracts of Euterpe oleracea, Myrciaria dubia, and purified oil of Bixa orellana and Astrocaryum aculeatum on the lifespan of Caenorhabditis elegans, a widely used model organism for aging research. The findings demonstrated that Terasen® exhibited significant antioxidant activity and influenced the feeding behavior of C. elegans, leading to a reduced pharyngeal pumping rate and a decreased number of offspring produced by treated individuals. Notably, Terasen® also displayed a remarkable ability to extend the lifespan of C. elegans. These findings suggest that Terasen® may possess promising anti-aging effects in vivo, warranting further investigation.

Eryngium foetidum L., a biennial herb with diverse applications in food and traditional medicine, holds economic and pharmacological significance. Given its growing commercial interest, implementing biotechnological approaches like plant tissue culture is vital for sustainable propagation and metabolite production. In this study, we investigated the in vitro photoautotrophic potential of E. foetidum, examining growth, chlorophyll a fluorescence, photosynthetic pigments, and anatomical features under different sucrose concentrations and gas exchange rates. Acclimatization and survival rates of plants after ex vitro transfer were also assessed. E. foetidum exhibited robust growth in both photoautotrophic and photomixotrophic conditions, with natural ventilation significantly enhancing plant development. Chlorophyll a fluorescence and photosynthetic performance were influenced by sucrose and gas exchange, highlighting the importance of these factors in plant micropropagation. Moreover, the species demonstrated remarkable plasticity during acclimatization, with high survival rates and rapid inflorescence emission. The research provides valuable insights into optimizing in vitro cultivation conditions for E. foetidum, emphasizing the potential for large-scale clonal propagation and exploring secondary metabolites. The observed phenotypic plasticity underscores the adaptability of the species to diverse environments. These biotechnological strategies open avenues for future studies, including the application of elicitors for enhanced secondary metabolite production.

Senna rugosa is a species found in the Cerrado and used in folk medicine as a vermifuge and in the treatment of poisonous snakebites accidents. In this work, we identified the main secondary metabolites present in ethanolic extracts of the leaves (ELSR) and roots (ERSR) of S. rugosa and evaluated the potential cytoprotective effect against cellular macromolecular damage, as well as the cytotoxic properties of the extracts on the K562 and Jurkat leukemic cell lines. The identification of metabolites was done by liquid chromatography coupled with mass spectrometry. The antioxidant activities were investigated by direct ABTS•+ and DPPH• radical scavenging methods, protection against oxidative damage in proteins and DNA. The cytotoxic properties were investigated against healthy cells, isolated from human peripheral blood (PBMC) and leukemic cell lines. The leaf extract contains catechin, rutin, epigallocatechin derivatives, kaempferol glycosides, luteolin, and dimeric and trimeric procyanidins, while the root extract profile shows obtusichromoneside derivatives, 2-methoxystypandrone, stilbene derivatives, naphthopyranones, and flavanone derivatives. The extracts showed antioxidant activity, with IC50 of 4.86 ± 0.51 µg/mL and 8.33 ± 0.90 µg/mL in the ABTS assay for ELSR and ERSR, respectively. And in the DPPH• assay, the IC50 was 19.98 ± 1.96 µg/mL for ELSR and 13.37 ± 1.05 µg/mL for ERSR. The extracts protected macromolecules against oxidative damage at concentrations of 5 µg/mL. The cytotoxicity test against leukemic strains was observed after 24 and 48 hours of treatment. After 48 h, results against the K562 cell line demonstrate IC50 of 242.54 ± 2.38 µg/mL and 223.00 ± 2.34 µg/mL for ELSR and ERSR , respectively. While against the Jurkat cell line, these extracts showed IC50 of 171.45 ± 2.25 µg/mL and 189.30 ± 2.27 µg/mL, respectively Results on PBMC viability, demonstrate that the extracts showed selectivity for the leukemic cell lines. Together, our results reveal that the leaves and roots of S. rugosa have completely distinct and complex chemical compositions. This study expands the repertoire of identified chemical compounds and underscores their significant pharmacological potential in conditions related to oxidative stress and leukemia.

To support the decision making process of new investors, this paper aims to implement Machine Learning algorithms to generate investment indications. Three artificial intelligence techniques were implemented, namely: Multilayer Perceptron, Logistic Regression and Decision Tree, which performed the classification of investments. The results of the different algorithms were compared to each other using the metrics: accuracy, precision, recall, and F1-score. The Decision Tree was the algorithm that obtained the best classification metrics and an accuracy of 77%.

Fungi of the genus Penicillium produce secondary metabolites used as a model for the synthesis and development of several compounds with bactericidal, fungicidal, antitumor, anti-inflammatory, antiviral activities, among others. Based on this information, a study was conducted to investigate the metabolomic profile and antimicrobial potential of Penicillium purpurogenum (CFAM – 214). The minimum inhibitory concentration (MIC) of extracts obtained from P. purpurogenum broth (CFAM - 214) in ISP2, SB, and YES against Candida albicans was 500 µg/mL, 31.25 µg/mL and 62, 5µg/mL, respectively. In the test against Candida tropicalis and Staphylococcus aureus, the MIC for extracts cultivated in SB was 250 µg/mL and 125 µg/mL, respectively. Due to the good performance of the P. purpurogenum extract in SB, large-scale cultivation was carried out that led to the isolation of two compounds, whose structures were determined by spectroscopic methods such as 1D NMR (1H NMR and 13C NMR) and 2D (HMBC and HSQC), HRMS and MS/MS. The isolated compounds were identified as two citrinin derivatives, dihydrocitrinin (1) and 1-methyl-dihydro citrinin (2).

This work aims to investigate systematically the tecno-economic feasibility of ther-mos-catalytic cracking process for two solid waste materials, a lipid-base material (re-sidual fat/scum from retention box of the University Restaurant of UFPA) and a lig-nin-cellulosic material Açaí seed (Euterpe oleracea. Mart). The thermo-catalytic process-es were carried out in pilot scale (THERMTEK/LEQ/UFPA/IME/RJ), and their economic feasibility analyzed. The yields of biofuels produced by fractional distillation were al-so studied. The physicochemical characteristics of the raw materials, the organic liquid product (bio-oil) and the chemical composition of kerosene, light-diesel and heavy-diesel from the lipid-base material, as well as those of kerosene and light-diesel from the Açaí seed were also determined. The economic indicators for the evaluation of the most viable cracking (pyrolysis) and distillation process of bio-oils were: a) the sim-ple payback criterion, b) discounted payback, c) net present value (NPV), d) internal rate of return (IRR), and e) index of profitability (IP). The analysis of the indicators showed the economic viability of crude palm oil (Elaeis guineensis, Jacq) and unfeasibil-ity for the palm oil neutralization. The minimum fuel selling price (MFSP) obtained is this work for the biofuels was of 1.34 US$/L) and the breakeven point obtained was of 1.28 US$/L. The sensibility analysis demonstrated that the pyrolysis and distillation yields are the most important variables to affect the minimum fuel selling price (MFSP).

Parkinson's disease (PD) is a degenerative disease that affects approximately 6.1 million and is primarily caused by the loss of dopaminergic neurons. Naphthoquinones have several biological activities explored in the literature, including neuroprotective effects. Therefore, this review shows an overview of natural and synthetic naphthoquinones with neuroprotective effects and with potential for the development of molecules for the treatment of PD. Many examples of natural naphthoquinones, such as shikonin, plumbagin and vitamin K, exerted a neuroprotective effect by preventing oxidative stress, in addition to multiple mechanisms. Synthetic naphthoquinones with inhibitory activity on the P2X7 receptor were also found, leading to a neuroprotective effect on Neuro-2a cells. It was found that naphthazarin can act as inhibitors of the MAO-B enzyme. Vitamin K and synthetic naphthoquinones hybrids with tryptophan or dopamine showed inhibition of the aggregation of α-synuclein. A library of synthetic derivatives of juglone and naphthazarin were able to protect Neuro-2a cells against neurodegenerative effects of neurotoxins. We report many examples of naphthoquinones that act in therapeutic pathways for the treatment of PD. In addition, routes for producing synthetic derivatives were also discussed. With the data presented, 1,4-naphthoquinones can be considered a promising class in the treatment of PD.

This work aims to investigate systematically the influence of process temperature, bio-mass-to-water ratio, and production scales (laboratory and pilot) on the chemical composition of aqueous and gaseous phases and mass production of chemical by hydrothermal processing of Açaí (Euterpe Oleraceae, Mart.) seeds. The hydrothermal carbonization carried out at 175, 200, 225, and 250 °C, 2 °C/min, biomass-to-water ratio of 1:10, and at 250 °C, 2 °C/min, and biomass-to-water ratios of 1:10, 1:15, and 1:20, in technical scale, as well as at 200, 225, and 250 °C, 2 °C/min, bio-mass-to-water ratio of 1:10, in laboratory scale. The elemental composition (C, H, N, S) of solid phase determined to compute the HHV. The chemical composition of aqueous phase determined by GC and HPLC and the volumetric composition of gaseous phase by using an infrared gas an-alyzer. For the experiments in pilot scale with constant biomass-to-water ratio of 1:10, the yields of solid, liquid, and gaseous phases varied between 53.39 and 37.01% (wt.), 46.61 and 59.19% (wt.), and 0.00 and 3.80% (wt.), respectively. The yield of solids shows a smooth exponential de-cay with temperature, while that of liquid and gaseous phases a smooth growth. By varying the biomass-to-water ratios, the yields of solid, liquid, and gaseous reaction products varied be-tween 53.39 and 32.09% (wt.), 46.61 and 67.28% (wt.), and 0.00 and 0.634% (wt.), respectively. The yield of solids decreases exponentially with increasing water-to-biomass ratio and that of liquid phase increases in a sigmoid fashion. For constant biomass-to-water ratio, the concentrations of Furfural and HMF decrease drastically with increasing temperature, reaching a minimum at 250 °C, while that of phenols increases. In addition, the concentrations of CH3COOH and total car-boxylic acids increase, reaching a maximum at 250 °C. For constant process temperature, the concentrations of aromatics vary smoothly with the temperature. The concentrations of furfural, HMF, and cathecol decrease with temperature, while that of phenols increases. The concentra-tions of CH3COOH and total carboxylic acids decrease exponentially with temperature. Finally, for the experiments with varying water-to-biomass ratios, the productions of chemicals (furfu-ral, HMF, phenols, cathecol, and acetic acid) in the aqueous phase is highly dependent on the biomass-to-water ratio. For the experiments in laboratory scale with constant biomass-to-water ratio of 1:10, the yields of solid ranged between 55.9 and 51.1% (wt.), showing not only a linear decay with tem-perature, but also a lower degradation grade. The chemical composition of main organic compounds (furfu-ral, HMF, phenols, cathecol, and acetic acid) dissolved in the aqueous phase in laboratory scale shows the same behavior of those in obtained in pilot scale.

The World Health Organization has estimated an annual occurrence of approximately 392 million Dengue virus (DENV) infections in more than 100 countries where the virus is endemic, and this represents a serious threat to humanity. DENV is a serologic group with four distinct serotypes (DENV-1, DENV-2, DENV-3, and DENV-4) belonging to the genus Flavivirus, in the family Flaviviridae. Dengue is the most widespread mosquito-borne disease in the world. The ~10.7 kb DENV genome encodes three structural proteins (capsid [C], pre-membrane [prM], and envelope [E]) and seven non-structural (NS) proteins (NS1, NS2A, NS2B, NS3, NS4A, NS4B, and NS5). The NS1 protein is a membrane-associated dimer and a secreted, lipid-associated hexamer. Dimeric NS1 is found on membranes both in cellular compartments and cell surfaces. Secreted NS1 (sNS1) is often present in patient serum at very high levels, which correlates with severe dengue symptoms. This study was conducted to discover how NS1 protein, microRNAs-15/16 (miRNAs-15/16), and apoptosis are related during DENV-4 infection in human liver cell lines. Huh 7.5 and HepG2 cells were infected with DENV-4, and miRNAs-15/16, viral load, NS1 protein, and caspases-3/7 were quantified after different times of infection. This study demonstrated that miRNAs-15/16 are overexpressed during infection of HepG2 and Huh 7.5 cells by DENV-4 and have a relationship with NS1 protein expression, viral load, and activity of caspases-3/7, thus making these miRNAs potential injury markers during DENV infection in human hepatocytes.

The bio-oil obtained by pyrolysis of Açaí (Euterpe oleracea Mart.) seeds at 450 ºC, 1.0 atmosphere, in technical scale, submitted to fractional distillation to produce biofuels-like fractions. The distillation of bio-oil carried out in a laboratory distillation column (Vigreux) of 30 cm. The physical-chemistry properties (density, kinematic viscosity, acid value and refractive index) determined by official methods. The chemical functions present in distillation fractions determined by FT-IR and the chemical composition by GC-MS. The distillation of bio-oil yielded gasoline, light kerosene, and kerosene-like fuel fractions of 16.16, 19.56, and 41.89% (wt.), respectively. All the physical-chemistry properties (density, kinematic viscosity, acid value and refractive index) increase with boiling temperature. The gasoline-like fraction is composed by 64.0% (area.) hydrocarbons and 36.0% (area.) oxygenates, while light kerosene-like fraction by 66.67% (area.) hydrocarbons and 33.33% (area.) oxygenates, and kerosene-like fraction by 19.87% (area.) hydrocarbons and 81.13% (area.) oxygenates.

The split of the brain into two hemispheres is pivotal to human existence, enabling incompatible versions of the world, with quite different priorities and values, to exist concomitantly. Neuroimaging techniques are usually the adopted methods to assess hemispherical bias. However, can differences in thinking orientation, behavioural style, and personality emerging from laterality be observed without the use of neuroimaging techniques? This paper investigates whether a personality test based on the Five-factor model (FFM) is also able to identify hemispherical bias. It does so by testing five hypotheses on personality differences related to handedness. The aim is to contribute to the instantiation of the FFM in neuroscience by testing its validity against the neuroscientific literature on brain laterality. The findings pointed to no statistically significant differences due to handedness in three out of five personality traits (namely, Neuroticism, Conscientiousness and Extraversion). As to the other two traits – Openness and Agreeableness – the hypotheses were only partially confirmed by the data, as the relevant difference found was not between left-handed and right-handed groups, but between ambidextrous and the others.

Upon the outbreak of the COVID-19, countries worldwide developed policies with the goal to introduce restrictive measures geared towards mitigating the spread of the virus. Although these health initiatives were put in place through top-down public directives, they relied heavily on the cooperation of citizens who had to be willing to carry them out. As a consequence, we could observe differences in compliance with governmental restrictions within and between countries. Increasing policy stringency was the method adopted overall to promote people’s compliance. This article used survey data from 10308 participants in Brazil to examine whether there was a positive correlation between policy stringency and compliance with restrictive measures to reduce the spread of COVID-19. The results revealed, however, that there was no direct influence of policy stringency on people’s health behaviors. Accordingly, I hypothesized that individual differences in personality traits were one of the drivers behind policy compliance, as they would support self-interests such as the duty to support authorities as well as the perceived health risks of certain behaviors and ultimately motivate compliance. The findings’ implications for both compliance research and for authorities wanting to nurture voluntary compliance with public health orders are discussed and suggestions are provided.

In this study, the objective is to analyze the economic viability of municipal household solid waste (organic matter + paper) for the production of gas, coke and biofuel through the pyrolysis and distillation process. The waste was collected in the city of Belém do Pará-Brazil and pre-treated at UFPA. The analyzed fraction (organic matter + paper) was subjected to pre-treatment of drying, crushing, sieving and was subsequently subjected to proximate characterization and finally pyrolysis of the organic fraction (organic matter + paper) in a fixed bed reactor. Initially, it was necessary to review the literature and with the yields obtained by pyrolysis of the frac-tion, economic feasibility analyzes were carried out. The economic indicators for evaluating the most viable pyrolysis process were: simple payback, discounted payback, net present value (NPV), internal rate of return (IRR), and profitability index (IL). The analysis of the indicators showed the economic viability considering an analysis horizon of 10 years, of materials based on organic material and paper. The break-even point obtained was 0.96 US$/L and the minimum biofuel sales price (MFSP – “Minimum Fuel Sale Price”) obtained in this work was 1.30 US$/L. The sensitivity analysis demonstrated that material costs (organic matter + paper), bio-oil yield, total project investment and electricity, respectively, are the variables that most affect the mini-mum biofuel sales price (MFSP).

The Atmospheric Dynamics Mission ADM-Aeolus was successfully launched in August 2018 by the European Space Agency (ESA). The Aeolus mission carried a single instrument, the first-ever Doppler Wind Lidar (DWL) in space, called Atmospheric LAser Doppler INstrument (ALADIN). Aeolus circled the Earth in a polar sun-synchronous orbit at about 320 km altitude with a repeat cycle of 7 days, providing vertical profiles of horizontal line-of-sight (HLOS) winds on a global scale. Exceeding scientific expectations, Aeolus, initially designed for a 3-year lifetime, provided global coverage of wind profiles for almost five years. In this long-term validation study, we assessed the accuracy of the Level 2B (L2B) Rayleigh-clear and Mie-cloudy wind products by collecting radiosonde data from three stations in the Brazilian Amazon: Cruzeiro do Sul (7.62° S, 72.67° W), Porto Velho (8.76° S, 63.91° W), and Rio Branco (10.00° S, 67.80° W). Statistical validation was conducted by comparing Aeolus L2B wind products and radiosonde data, launched daily at 12:00 UTC from October 2018 to March 2023. Considering all data collected during the mission period, Pearson’s coefficient (R) of 0.73 was observed in Rayleigh-clear and 0.85 in Mie-cloudy, revealing a strong correlation between Aeolus and radiosonde winds. No significant biases were detected, with values of -0.14 m/s for Rayleigh-clear and -0.40 m/s for Mie-cloud, fulfilling the mission requirement of having absolute biases below 0.7 m/s. However, when analyzed annually, in 2022, the bias for Rayleigh-clear was -0.95 m/s, exceeding the mission requirements.

This work aims to investigate systematically the tecno-economic feasibility of ther-mos-catalytic cracking process for two solid waste materials, a lipid-base material (re-sidual fat/scum from retention box of the University Restaurant of UFPA) and a lig-nin-cellulosic material Açaí seed (Euterpe oleracea. Mart). The thermo-catalytic process-es were carried out in pilot scale (THERMTEK/LEQ/UFPA/IME/RJ), and their economic feasibility analyzed. The yields of biofuels produced by fractional distillation were al-so studied. The physicochemical characteristics of the raw materials, the organic liquid product (bio-oil) and the chemical composition of kerosene, light-diesel and heavy-diesel from the lipid-base material, as well as those of kerosene and light-diesel from the Açaí seed were also determined. The economic indicators for the evaluation of the most viable cracking (pyrolysis) and distillation process of bio-oils were: a) the sim-ple payback criterion, b) discounted payback, c) net present value (NPV), d) internal rate of return (IRR), and e) index of profitability (IP). The analysis of the indicators showed the economic viability of crude palm oil (Elaeis guineensis, Jacq) and unfeasibil-ity for the palm oil neutralization. The minimum fuel selling price (MFSP) obtained is this work for the biofuels was of 1.34 US$/L) and the breakeven point obtained was of 1.28 US$/L. The sensibility analysis demonstrated that the pyrolysis and distillation yields are the most important variables to affect the minimum fuel selling price (MFSP).

Canga vegetation has high ecological importance in the Serra dos Carajás, southeastern Amazonia, but it coexists with the potential threat of large-scale iron ore mining. Considering Convolvulaceae, this canga environment has only 17 species, and 15 of these species had their pollen grains described in detail in this present work, aiming to contribute to the taxonomic knowledge of critically endangered plants, including Ipomoea cavalcantei. Pollen grains were examined by light and scanning electron microscopy, and the morphological parameters obtained were statistically analyzed using principal component analysis. Therefore, Aniseia cernua was described for the first time in the literature. In general, the echinae morphology were the main differentiating character among the Ipomoea species and was the basis for the proposed pollen key. The family Convolvulaceae in Carajás is eurypalynous, and the genus Ipomoea may be classified as stenopalynous. The set of morphological characters statically treated and correlated was effective for the separation of Ipomoea.

Rhizophora mangle L. is a well-known medicinal plant found in mangroves worldwide used to treatment diabetes. This study evaluated the chemical composition of the acetonic extract from Rhizophora mangle barks (AERM), by HPLC-PDA and FIA-ESI-IT-MS/MS and the effects on high-fat diet induced obesity in mice and its mechanism of action by gene expression of inflammatory markers (Pparg, Ppara, Srebf1, Cd36, Tnf, Ccl2, Lep, Il10, Il6, Fasn, 18s). High-fat diet fed mice during 12 weeks was used as model of obesity and associated alterations. The results were very satisfactory, the extract, rich in polyphenolic compounds, flavonoids and phenolic acids, displayed intense antioxidant activity in vitro (608 µmol Trolox/g), and showed excellent activity against non-alcoholic fatty liver disease (NAFLD) and reverse insulin resistance in a model of diet-induced obesity. We can registered a modulatory effect of AERM in liver PPAR-γ mRNA expression associated to an important inhibition of CD36 mRNA expression suggesting that AERM induces the down regulation of CD36 mRNA via PPAR-gamma inhibition. These results support the traditional knowledge about the use of R. mangle for the treatment of type 2 diabetes and reveal the potential of AERM for the treatment of NAFLD and management of obesity and comorbidities.

In this work, the cross-linked PMMA-based dental resins scraps were submitted to pyrolysis to recover MMA (Methylmethacrylate). The thermal degradation of cross-linked PMMA-based dental resins scraps was analyzed by TG/DTG to guide the operating conditions in pilot scale. The pyrolysis experiments carried out in a reactor of 143L, at 345, 405, and 420°C, 1.0 atmosphere. The reaction liquid products obtained at 345°C, physicochemical characterized for density, kinematic viscosity, and refractive index. The chemical composition of liquid products obtained at 345°C, 30, 40, 50, 60, 70, 80, and 110 minutes, at 405°C, 50, 70, and 130 minutes, and at 420°C, 40, 50, 80, 100, 110, and 130 minutes determined by GC-MS. The experiments show that liquid phase yields were 55.50%, 48.73%, and 48.20% (wt.), at 345, 405, and 420°C, respectively, showing a smooth sigmoid behavior, decreasing with increasing temperature, while that of gas phase were 31.69%, 36.60%, and 40.13% (wt.), respectively, increasing with temperature. The liquid products density, kinematic viscosity, and refractive index obtained at 30, 40, 50, 60, 70, 80, and 110 minutes, varied between 0.9227 and 0.9380 g/mL, 0.566 and 0.588 mm2/s, and 1.401 and 1.414, respectively, showing percentage deviations between 0.74 and 2.36%, 7.40 and 10.86%, and 0.00 and 0.92%, respectively, compared to standard values for density, kinematic viscosity, and refractive index of pure MMA at 20 °C. The GC-MS identified in the reaction liquid products at 345, 405, and 420°C, 1.0 atm, esters of carboxylic acids, alcohols, ketones, and aromatics, showing concentrations of MMA between 83.454 and 98.975% (area.). For all the depolymerization experiments, the concentrations of MMA in the liquid phase, between 30 and 80 minutes, reach purities above 98% (area.), decreasing drastically with increasing reaction time after 100 minutes, thus making it possible to depolymerize the cross-linked PMMA-based dental resins scraps by pyrolysis to recover MMA. The optimum operating conditions to achieve high MMA concentrations, as well as elevated yields of liquid reaction products were 345 °C and 80 minutes.

The number of physical devices connected to the Internet such as vehicles, household appliances and other "things" has been steadily increasing in recent years, thus forming the basis for the Internet of Things (IoT). IoT ecosystem extends beyond country borders and application domains, combining thousands of versatile devices that differ in terms of their structures, capabilities, and available resources. It is therefore not surprising that the landscape of wireless communication technologies and the degree of IoT devices available today is excessively broad and diverse. Interference between networks leads to frame collisions and consequent packet loss. Frame collisions occur when two or more packets overlap in time and frequency and use the same Long Range (LoRa) parameters, i.e. the same Spreading Factor (SF), Bandwidth (BW) and Carrier Frequency (CF). When most devices use the same configuration, collision probability is higher. The probability of frame collisions is also affected by traffic characteristics, particularly the periodicity of the transmission and the payload size. Larger payload sizes and more frequent transmissions accumulate with higher Time on Air (ToA) and channel occupancy [1]. Transmission powers and the location of the gateways also influences this situation. The aim of this experimental work is to verify the effects of collisions and interference in Long Range Wide Area Network (LoRaWAN), regarding the periodicity of transmissions and the payload sizes in a context of an inter-SF interference scenario. And to validate measuring tools like Received Signal Strength Indicator (RSSI), ToA and Packet Delivery Ratio (PDR) in the reliability of a network. We validate our conclusions by analyzing ToA according with RSSI and different data sizes, the RSSI for different SFs and different data sizes and finally the packet loss through the PDR for a better understanding of the reliability of packet transmission in our link. In the end we conclude that in an environment with inter-SF interference, the choice of SFs and packet lengths impacts ToA. When dealing with multiple devices near gateways, different SFs and varying packet lengths can lead to increased latency and longer ToA. Consequently, the risk of packet loss becomes more significant, especially if the signal-to-interference ratio (SIR) is low. This limitation will therefore affect scalability, particularly in Non-Line-Of-Sight (NLOS) scenarios.

This paper investigates an Energy Neutral System using Micro Energy Harvesters for a Health Monitoring Wireless Sensor Node (HM-WSN). We have implemented HM-WSN consisting of a solar cell energy harvester, a Power Management Unit (PMU) and the ucontroller, sensor and transmitter acting as load. A battery extender and a switching logic circuit for sensor node is designed to evaluate the efficiency of the proposed system. The HM-WSN senses body temperature with improvement in lifetime of coincell. The HM-WSN is built using commercially available off the shelf (COTS components and consumes 47.2uW for data being updated every 134s. It can be operated for approximately 1.32 years only on a coincell. Furthermore, the HM-WSN can be operated with solar energy at 200lux, achieving 96.36 years with a combination of a coincell with an additional capacitor of 2.2mF. It attains 4.07 years to 16.87 years lifetime with the load capacitor varying from 1mF to 1.5mF at 350lux lighting condition. With the same ambient condition and a 2mF load capacitor, HM-WSN attains complete energy autonomy.

Biocontainment techniques for genetically modified yeasts (GMYs) are pivotal due to the importance of these organisms for biotechnological processes and also due to the design of new yeast strains by using synthetic biology tools and technologies. Due to the large genetic modifications that many yeast strains display, it is highly desirable to avoid the leakage of GMY cells into natural environments and, consequently, the spread of synthetic genes and circuits by horizontal or vertical gene transfer mechanisms within the microorganisms. Moreover, it is also desirable to avoid that patented yeast gene technologies spread outside the production facility. In this review, it was evaluated the different biocontainment technologies currently available for GMYs. Interestingly, uniplex-type biocontainment approaches (UTBAs), which relies on nutrient auxotrophies induced by gene mutation or deletion, or the expression of simple kill switches apparatus, are still the major biocontainment approaches still in use with GMY. While bacteria like Escherichia coli account for advanced biocontainment technologies based on synthetic biology and multiplex-type biocontainment approaches (MTBAs), GMYs are distant from this scenario due to many reasons. Thus, a comparison of different UTBAs and MTBAs applied for GMY and genetically engineered microorganisms (GEMs) was made, indicating the major advances of biocontainment techniques for GMYs.

This study evaluated the hip joints of the giant anteater (Myrmecophaga tridactyla) through imaging and macroscopic analyses and proposed a surgical approach for arthrotomy procedures in this species. The study used four samples fixed in 10% formaldehyde and six thawed carcasses. Radiographic and ultrasound examinations and anatomical dissection allowed the proposal of a surgical approach for the hip joint. The radiographic evaluation occurred with frog-legged ventrodorsal and lateral projections, and the ultrasound enabled joint soft tissue assessment. The articular elements represented similar characteristics to other domestic species. Some anatomical particularities of muscle groups were the intermuscular septum between the tensor fasciae latae and superficial gluteus muscles at the level of the greater trochanter of the femur, which provides lateral access to the femoral head and neck more conservatively. In conclusion, the anatomical particularities of radiographic positioning, the clinical applications of joint ultrasound, and the arrangement of muscle groups must be considered when evaluating and surgically accessing the hip joint of the giant anteater.

The pharmacological effects of the fruiting body of Ophiocordyceps sinensis (Os) exerted antioxidant, anti-virus, and immunomodulatory, whereas the anti-inflammatory effects and active components of Os mycelial submerged culture (OMSC) are not known. This study aimed to investigate the active compounds in the fermented liquid (FLOS), hot water (WEOS), and 50-95% (EEOS-50, EEOS-95) ethanol extracts of OMSC and their anti-inflammatory effects and potential mechanisms in LPS-stimulated microglial BV2 cells. The results demonstrated that all of the OMSC extracts could inhibit NO production in BV2 cells. EEOS-95 exhibited the strongest inhibitory effects (41 % inhibitory ability at 500 µg/mL), and its ergosterol, GABA, total phenolic, and total flavonoid contents were significantly higher than those of the other extracts (18.60, 18.60, 2.28, and 2.14 mg/g, p &lt; 0.05, respectively). EEOS-95 also has a strong inhibitory ability against IL-6, IL-1β and TNF-α with IC50 of 617, 277 and 507 µg/mL, respectively, which is higher than that of 1 mM melatonin. The anti-inflammatory mechanism of EEOS-95 seems to be associated with up-regulation of PPAR-γ/Nrf-2/HO-1 antioxidant-related expression and down-regulation of NF-κB/COX-2/iNOS pro-inflammatory expression signaling. Therefore, we hypothesized that EEOS-95 can prevent neurodegenerative diseases, but the effect on the application in vivo should be further investigated.

Despite the efforts made to stop the tuberculosis (TB) epidemic, it still remains one of the leading causes of death from an infectious disease. Previous work in the group uncovered a new family of amides which showed promising activities against Mycobacterium tuberculosis. A closer look at the literature showed that these compounds are structurally related to the DNB family of DprE1 inhibitors, so, we decided to study a wide range of substituted amides and determine their activity, focusing on unexplored structures related to the dinitrobenzamides (DNB) found in the literature. To synthesize our library of compounds we started from 3,5-dinitrobenzoic acid to form the nitroaromatic core that is characteristic of the DNB’s, to which we then added linear or cyclic amine moieties. Additionally, the impact of terminal aromatic moieties was also assessed for some derivatives, via an ether, ester, or amide bond. In order to obtain the desired derivatives, multiple synthetic approaches were used, mainly focused on nucleophilic addition/elimination reactions, SN2 reactions and Mitsunobu reactions. The activity was impacted mainly by two structural features, the addition of an aromatic moiety as a terminal group and the type of the linker. The most interesting compounds exhibited activities comparable to isoniazid and DNB1. Computational studies were also performed aimed at understanding their possible interactions with DprE1. The most active compounds are a good starting point for further development, and we plan to study an extended family of compounds based in those structures.