Euryale ferox, which belongs to the family of Nymphaeaceae, has been widely distributed in China, India, Korea, and Japan. The seeds of E. ferox (EFS) have been categorized as superior food for 2000 years in China, based on its abundant nutrients including polysaccharides, polyphenols, sesquineolignans, tocopherols, cyclic dipeptides, glucosylsterols, cerebrosides, and triterpenoids. These constituents exert multiple pharmacological effects, such as antioxidant, hypoglycemic, cardioprotective, antibacterial, anticancer, antidepression, and hepatoprotective properties. There are very few summarized reports on E. ferox, albeit with its high nutritional value and beneficial activities. Therefore, we collected the reported literatures (since 1980), medical classics, databases, and pharmacopeia of E. ferox, and summarized the botanical classification, traditional uses, phytochemicals, and pharmacological effects of E. ferox, which will provide new insights for the further research and development of EFS-derived functional products.

Cultivated land plays an important role in water and soil loss in the earth-rocky mountainous region, northern China, however, its responses to soil control measures and rainfall characteristics are still not fully understood. In this study, 85 erosive rainfall events in 2011-2019 were grouped into three types, and the responses of runoff and soil loss on five cultivated plots with different slopes in the upstream catchment of the Miyun Reservoir to soil conservation measures and rainfall regimes were evaluated. Results found that event-averaged runoff depths and soil loss rates on the five plots ranged from 7.05 mm to 0.03 mm and from 300.51 t km-2 to 0.37 t km-2 respectively, depending on rainfall regimes, soil conservation measures, and slope gradients. The high occurring frequency (i.e., 72.94%) rainfall regime A with short rainfall duration (RD), low rainfall amount (P), and high mean rainfall intensity (Im) yielded lower runoff depth and higher soil loss rate. Rainfall regime B with longer RD, and higher P and Im, however, produced higher rainfall depth and lower soil loss rate. Terraced plot had the highest runoff and soil loss reduction efficiencies of over 96.03%. Contour tillage had comparable sediment reduction efficiency to that of the terraced plot on gentle slopes (gradient less than 11.0%), while its runoff reduction efficiency was less than 13.11%. This study implies that in the Miyun Reservoir catchment and similar regions in the world, contour tillage should be promoted on gentle slopes, and terrace construction should be given enough attention since it can greatly reduce water quantity and cause water shortage in downstream catchments.

Yijing possesses inherent principles and logic, and it has achieved consensus as an auxiliary decision-making function. Research on Yijing has been validated in the field of superpsychology, primarily focusing on individuals. However, the universal value of Yijing extends beyond individual divination or telepsychological induction, and there are untapped scientific potential values associated with it. Consequently, many scholars studying Yijing, including those in Chinese medicine, attempt to decipher its internal scientific mechanism through quantitative methods. In summary, scientific quantitative analysis of Yijing can be categorized into several approaches. These include quantification based on Yijing itself (binary and hexagram order), as well as quantification based on mathematical statistics, probability, and calculus. Another approach involves quantification based on expert knowledge, as well as the quantification of timewave curves and Yi-globle. Significant progress has been made in all of these quantitative research areas within the scientific paradigm. Nevertheless, future quantification of Yijing may explore rule-based evolutionary analysis, incorporating artificial intelligence technology, and conduct quantitative analysis based on the evolutionary process and results. There is even potential to deepen this research with tools such as ChatGPT. Additionally, the focus of Yijing divination may shift from individual events to group events, accompanied by space-time modeling and analysis through the construction of a new coordinate system.

The carbonyl iron particles were dispersed in a polychloroprene rubber (CR) matrix under an external magnetic field for practical application as microwave absorption composites film. The film prepared under external magnetic field with a thickness of only 0.54 mm showed least reflection loss of -15.98 dB and the reflection loss value less than -10.0 dB over the frequency range of 11.4~14.8 GHz. In comparison with the microwave absorption properties of calculation by transmission line theory based on the tested relative complex permittivity and permeability and film prepared by general route without external magnetic field, the film made with external magnetic field exhibited more excellent microwave absorption properties, strongly depending on the increment of anisotropy and rearrangement of magnetic particles. The results indicated the composite film made under external magnetic field have excellent microwave absorption properties, which suggest that the composites thin film could be used as a thinner and lighter microwave absorber.

The International tax regime (ITR) has been transformed after the Great Recession of 2008–2009. The G20/Organization for Economic Cooperation and Development (OECD)’s Base Erosion and Profit Shifting (BEPS) project (2013–2015) has fundamentally changed the ITR, giving new life to the single tax principle (income should be taxed once, i.e., no double taxation and no double non taxation). Reaction to BEPS has varied dramatically between the EU and the US, the two largest markets in the world. In the EU BEPS is taken very seriously, as shown for example by the new Anti-Tax Avoidance Directives that implement the single tax principle. In the US BEPS is almost invisible; while the US model tax treaty has been amended to incorporate it the US has refused to sign the Multilateral Instrument to implement BEPS in its treaties and the only other BEPS action that the US has taken is country by country reporting. It thus appears that the future of BEPS and the ITR depends on whether the EU or the US view prevails, i.e., whether multinationals can be forced to pay significant tax on the 160–240 billion that are currently not taxed annually because of BEPS. While US multinationals as well as EU multinationals are exposed to the EU ATAD and related measures while operating in Europe, they are less subject to EU anti BEPS measures elsewhere in the world. It therefore is crucial to assess the reaction to BEPS in the other large economy that was involved in its development, namely China. This article attempts to assess China’s reaction to BEPS based on Chinese sources. It shows that China takes BEPS seriously. Therefore, given the reactions of China (as well as India, which is even more aggressive than China for example in taxing the digital economy) it seems likely that eventually the EU view of BEPS will prevail and US based multinationals will eventually be forced to pay tax on the over 100 billion they shift offshore each year.

This paper considers the general ocean circulation within the thermodynamical closure of our climate theory, which aims to deduce the generic climate state from first principles. The preceding papers of the theory have reduced planetary fluids to warm/cold masses and determined their bulk thermal properties, which provide prior constraints for the derivation of the upper-bound circulation when the potential vorticity is homogenized in moving masses. In a companion paper on the atmosphere, this upper bound is seen to reproduce the prevailing wind, forsaking therefore previous discordant explanations of the easterly trade and the polar jet stream. In this paper on the ocean, we again show that this upper bound may replicate broad features of the observed circulation, including a western-intensified subtropical gyre and a counter-rotating tropical gyre feeding the equatorial undercurrent. Together, we posit that PV homogenization may provide a unifying dynamical principle of the large-scale planetary circulation, which may be interpreted as the maximum macroscopic motion extractable by microscopic stirring --- within the confine of the thermal differentiation.

To study the feasibility and effect of compounding lignin and its derivatives to improve expansive soil, the physical properties, mechanical properties, and microstructure of the improved soil mixed with calcium lignosulfonate alone, calcium lignosulfonate and lignin fibers were investigated through indoor experiments and electron microscope scanning. Select samples with better performance for water stability tests, and discuss the improvement mechanism of expansive soil by combining macroscopic mechanical changes with microstructural characteristics. The research results show that the addition of calcium lignosulfonate can reduce the water content of the soil and enhance its strength of the soil. The overall performance is the best when the calcium lignosulfonate content is 3%. 3% calcium lignosulfonate compounded with 1.5% lignin fiber has the best all-around performance; the composite improved soil has a better pore-filling effect, the whole is more compact, and the connection between particles significantly enhances the strength, which greatly inhibits the development of cracks good water stability. Lignin and its derivatives compound improved expansive soil have better effect than traditional improvement methods, and have no pollution to the environment, which can provide a particular reference for engineering practice

To study the feasibility and effect of compounding lignin and its derivatives to improve expansive soil, the physical properties, mechanical properties, and microstructure of the improved soil mixed with calcium lignosulfonate alone, calcium lignosulfonate and lignin fibers were investigated through indoor experiments and electron microscope scanning. Select samples with better performance for water stability tests, and discuss the improvement mechanism of expansive soil by combining macroscopic mechanical changes with microstructural characteristics. The research results show that the addition of calcium lignosulfonate can reduce the water content of the soil and enhance its strength of the soil. The overall performance is the best when the calcium lignosulfonate content is 3%. 3% calcium lignosulfonate compounded with 1.5% lignin fiber has the best all-around performance; the composite improved soil has a better pore-filling effect, the whole is more compact, and the connection between particles significantly enhances the strength, which greatly inhibits the development of cracks good water stability. Lignin and its derivatives compound improved expansive soil have better effect than traditional improvement methods, and have no pollution to the environment, which can provide a particular reference for engineering practice.

The debate surrounding the scientific interpretation of Yijing has been ongoing, yet thus far, a systematic, comprehensive, and objective explanation of its scientization remains elusive. The intricate nature of Yijing' scientific content makes it challenging to gain universal acceptance. The emergence of ChatGPT presents a new opportunity to delve into the scientific aspects of Yijing. Leveraging the support of ChatGPT, this paper explores the potential for scientization of Yijing and the possibility of establishing a new scientific research paradigm through in-depth dialogue with ChatGPT. It examines various aspects including the evolution of scientific paradigms, perspectives from detractors and opponents of Yijing, as well as existing challenges and approaches to its scientization. The ideas presented in this paper may offer enlightening insights for further exploration of Yijing.

Impact of land use and land cover (LULC) change on soil erosion is still imperfectly understood, especially in northeastern China (NEC). Based on the Revised Universal Loss Equation (RUSLE), the variability of soil erosion at different spatial scales following land use changes in1980, 1990, 2000, 2010, and 2017 was analyzed. The regionally spatial patterns of soil loss coincided with the topography, rainfall erosivity, soil erodibility, and use patterns, and around 45% soil loss came from arable land. Regionally, soil erosion rates increased from 1980 to 2010 and decreased from 2010 to 2017, ranging from 3.91 to 4.45 t ha-1 yr-1 with an average of 4.22 t ha-1 yr-1 in 1980-2017. The rates of soil erosion less than 1.41 t ha-1 yr-1 decreased from 1980 to 2010, and increased from 2010 to 2017, and opposite changing patterns occurred in higher erosion classes (i.e., above 5 t ha-1 yr-1). At a provincial scale, Liaoning Province experienced the highest soil erosion rate of 9.43 t ha-1 yr-1, followed by Jilin Province, the east Inner Mongolia, and Heilongjing Province. Arable land continuously increased at the expense of forest in the high-elevation and steep-slope areas from 1980 to 2010, and decreased from 2010 to 2017, resulting in increased areas with erosion rates higher than 7.05 t ha-1 yr-1. At a county scale, around 75% of the countries had soil erosion rate higher than its tolerance level. The county numbers with higher erosion rate increased in 1980-2010 and decreased in 2010- 2017, resulting from the sprawl and withdrawal of arable land. The results indicate that appropriate policies can control soil loss through limiting arable land sprawl in areas of unfavorable regions in the NEC.

This study investigates optimal decisions in a green supply chain consisting of a manufacturer and a leading retailer considering the green marketing and fairness preferences of member firms. Four Stackelberg game decision models are constructed in which the manufacturer and the re-tailer engage in green marketing separately when the manufacturer has no and has fairness preferences. The impacts of fairness preferences and green marketing on the optimal decision in the green supply chain are comparatively analyzed. The study finds that member firms perform green marketing regardless of the presence or absence of fairness preferences and that such be-havior increases the wholesale price, retail price, and market demand of low-carbon products as well as the profits of member firms and the supply chain. A more interesting finding is that the profit growth of member firms and the supply chain due to the manufacturer’s green marketing is more pronounced than that due to the retailer’s green marketing. When the retailer and the manufacturer engage in conduct green marketing, the manufacturer's fairness preferences have different effects on the wholesale price, retail price, market demand, level of green marketing efforts, member enterprises and profits of supply chain. Therefore, firms should consider the impact of green marketing and fairness preferences to make pricing and performance decisions, so as to achieve efficient operation of the whole supply chain and avoid double marginal effects. Finally, the above conclusions are verified through numerical simulation, providing a reference for the decision-making of member firms in the green supply chain.

Brain magnetic resonance imaging (MRI) offers a unique lens to study neuroanatomic support of human neurocognition and intelligence. A core mystery is the MRI explanation of individual differences in neurocognition and intelligence. The past four decades have seen great advancement in studying this century-long mystery, but the sample size and population-level studies limit the explanation at the individual level. The recent rise of big data and artificial intelligence offers novel opportunities. Yet, data sources, harmonization, study design, and interpretation need to be carefully considered. This review aims to summarize past work, discuss rising opportunities and challenges, and facilitate further investigations on machine intelligence inferring human intelligence.

Inositol transporter (INT) is reputed as the pivotal transporter for vital metabolites like lipids, minerals, and sugars particularly. These transporters play important role in transitional metabolism and various signaling pathways in plants through regulating the transduction of messages from hormones, neurotransmitters, and immunologic and growth factors. Extensive studies have been conducted on animal INT with promising outcomes. However, few recent studies have highlighted the importance and the complexity of INT genes in the regulation of plant physiology stages including growth and tolerance to stress conditions. The present review sum-up the most recent findings on the role of INT or inositol genes in plant metabolisms and the responsive mechanisms that cope with external stressors. Moreover, we highlighted the emerging role of vacuoles and vacuolar inositol transporters in plant molecular transition and their related roles in plant growth and development. Inositol transporters are the essential mediator for the inositol uptake and its intracellular broadcasting for various metabolic pathways where they play crucial roles. Also, so far characterized only in animals, we reported evidence on Na+/inositol transporters H+/inositol symporters and suggested their roles and operating mode in plants. Thus, understanding the INT functioning system, the coordinated movement of inositol, and the relation between inositol generation and other important plant signaling pathways would be an excellent asset for advancement in researches on plant stress adaptation.

Alzheimer's disease (AD) is the most common form of dementia and neurogenerative diseases (NDDs), which is one of the leading causes of death worldwide. The number of AD patients is over 55 million according to 2020 Alzheimer's Disease International (ADI) and the number is increasing drastically without any effective cure. In this review, we discuss and analyze the potential role of anthocyanins (ACNs) against AD with understanding the molecular mechanisms. ACNs have been reported as having neuroprotective effects by mitigating cognitive impairments, apoptotic markers, neuroinflammation, aberrant amyloidogenesis, and tauopathy. Taken together, ACNs could be the therapeutic agent for combating or delaying the onset of AD.

Neonatal electronic cardiac monitoring in labor and delivery room (DR-ECG) is shown to be sustained at a tertiary care regional perinatal center despite COVID-19 and other complex organizational challenges. In this contemporary cohort, initial increase in chest compressions at birth associated with the introduction of DR-ECG monitoring was mitigated by focused educational interventions on effective ventilation with no difference in neonatal mortality. DR-ECG may help our understanding of human and system factors, identify potential better practices for optimal resuscitation team performance and assess impact of targeted training initiatives on clinical outcomes.

People are drawn to woodcut-style designs due to their striking visual impact and strong contrast. However, traditional woodcut prints and previous computer-aided methods have not addressed the issues of dwindling design inspiration, lengthy production times, and complex adjustment procedures. We propose a novel network framework, the Woodcut-style Design Assistant Network (WDANet), to tackle these challenges. Notably, our research is the first to utilize diffusion models to streamline the woodcut-style design process. We've curated the Woodcut-62 dataset, featuring works from 62 renowned historical artists, to train WDANet in absorbing and learning the aesthetic nuances of woodcut prints, offering users a wealth of design references. Based on a noise reduction network, our dual cross-attention mechanism effectively integrates text and woodcut-style image features. This allows users to input or slightly modify a text description to quickly generate accurate, high-quality woodcut-style designs, saving time and offering flexibility. As confirmed by user studies, quantitative and qualitative analyses show that WDANet outperforms the current state-of-the-art in generating woodcut-style images and proves its value as a design aid.

In this paper, we extend the Merton model of investment in discrete time to the cases when there is a finite number of investors and the market is with frictions represented by convex penalty functions defined for each investor. In the main result of this paper, we proved the existence of optimal strategy of investment by using a new approach based on the formulation of an equivalent general equilibrium economy model.

Our work uses Iterative Boltzmann Inversion (IBI) to study the coarse-grained interaction between 20 amino acids and the representative carbon nanotube CNT55L3. IBI is a multi-scale simulation method that has attracted the attention of many researchers in recent years. It can effectively modify the coarse-grained model derived from the Potential of Mean Force (PMF). IBI is based on the distribution result obtained by All-Atom molecular dynamics simulation, that is, the target distribution function, the PMF potential energy is extracted, and then the initial potential energy extracted by the PMF is used to perform simulation iterations using IBI. Our research results have gone through more than 100 iterations, and finally, the distribution obtained by coarse-grained molecular simulation (CGMD) can effectively overlap with the results of all-atom molecular dynamics simulation (AAMD). In addition, our work lays the foundation for the study of force fields for the simulation of the coarse-graining of super-large proteins and other important nanoparticles.

Meshfree particle method, which is always regarded as a pure Lagrangian approach, is easily represented complicated domain topologies, moving boundaries, and multiphase media. Solving acoustic problems with the mesfree particle method forms a branch of the acoustic wave modeling field, namely, particle-based computational acoustics (PCA). The aim of this paper is to improve the accuracy of using the PCA method to solve two-dimensional acoustic problems, and realize the particle representation with a hybrid meshfree and finite-difference time-domain (FDTD) method for acoustic boundary conditions at both the plane and curved surface. As a widely used Lagrangian meshfree method, the smoothed particle hydrodynamics (SPH) based on the support domain and the kernel function has developed rapidly in recent years. The traditional SPH method is easily implements parallel processing and has been applied in sound wave simulation. As a corrective method with higher accuracy than SPH, the acoustic propagation and scattering in the time domain is simulated with the corrective smoothed particle method (CSPM). Moreover, a hybrid meshfree-FDTD boundary treatment technique is utilized to represent different acoustic boundaries in the Lagrangian approach. In this boundary treatment technique, the parameter value of virtual particles is obtained with the FDTD method, which concerns truncation errors based on the Tayler series expansion. Soft, rigid, and Mur’s absorbing boundary conditions are developed to simulate sound waves in finite and infinite domain. Results of modeling acoustic propagation and scattering show that CSPM is accurate and convergence with exact solutions, and different acoustic boundaries are validated to be effective in the computation.

Tsallis entropy has been widely used in image thresholding because of its non-extensive properties. The non-extensive parameter q contained in this entropy plays an important role in various adaptive algorithms and has been successfully applied in bi-level image thresholding. In this paper, the relationships between parameter q and pixels’ long-range correlations have been further studied within multi-threshold image segmentation. It is found that the pixels’ correlations are remarkable and stable for images generated by a known physical principle, such as infrared images and medical CT images. And the corresponding non-extensive parameter q can be evaluated by using self-adaptive Tsallis entropy algorithm. The results of this algorithm are compared with those of Shannon entropy algorithm and the original Tsallis entropy algorithm, in terms of quantitative image quality evaluation metrics PSNR (Peak Signal-to-Noise Ratio) and SSIM (Structural Similarity). Furthermore, we observed that for image series with the same background, the q values determined by the adaptive algorithm are consistently kept in a narrow range. Therefore, similar or identical scenes during imaging would produce similar strength of long-range correlations, which provides potential applications for unsupervised image processing.

In recent decades, with the ever-growing scale of video data, near-duplicate videos continue to emerge. Data quality issue caused by near-duplicate videos is becoming more and more prominent, which has affected the application of normal videos. Although current studies on near-duplicate video detection can be helpful to uncover data quality issues for videos, they still lack a process of automatic merging for the video data represented by high-dimensional features, which are difficult to automatically clean the near-duplicate videos to improve data quality for video datasets. At present, there are few studies on near-duplicate video data cleaning. The existing studies have the sensitive problems of video data orderliness and clustering initial center under a condition that prior distribution is unknown, which seriously affect the accuracy of near-duplicate video data cleaning. To address the above issues, an automatic near-duplicate video data cleaning method based on a consistent feature hash ring is proposed in this paper. First, a residual network with convolutional block attention modules, a long short-term memory deep network, and an attention model are integrated to construct an RCLA deep network with the multi-headed attention mechanism to extract spatiotemporal features of video data. Then, a consistent feature hash ring is constructed, which can effectively alleviate the sensitivity of video data orderliness while providing a condition of near-duplicate video merging. To reduce the sensitivity of the initial cluster centers to results of near-duplicate video cleansing, an optimized feature distance-means clustering algorithm is constructed by utilizing a mountain peak function on a consistent feature hash ring, which can implement automatic cleaning of near-duplicate video data. Finally, experiments are conducted based on a commonly used dataset named CC_WEB_VIDEO and a coal mining video dataset. Compared with some existing works, simulation results demonstrate that the performance of the proposed method.

The total tree height (h) and diameter at breast height (dbh) relationship is an essential tool in forest management and planning. The height—diameter (h-dbh) relationship had been studied with several approaches and for several species worldwide. The nonlinear mixed effect modeling (NLMEM) has been extensively used and lately the resilient backpropagation artificial neural network (RBPANN) approach has been a trend topic for modeling this relationship. The artificial neural network (ANN) is a computing system based in artificial intelligence and inspired in biological neural network for supervised learning. In this study the NLMEN and RBPANN approaches were used for modeling the h—dbh relationship for Durango pine species (Pinus durangensis Martínez) in mixed-species forest from Mexico. The total dataset considered 1,000 (11,472 measured trees) randomly selected from 14,390 temporary forest inventory plots and the dataset was randomly divided into two parts; 50% for training and 50% for testing. An unsupervised clustering analysis was used to grouped the dataset into 10 clusters based on k-means clustering method and plot-variables like density, basal area, mean dbh, mean h, quadratic mean diameter, altitude and aspect. The RBPANN was performed for tangent hyperbolicus (RBPANN-tanh), softplus (RBPANN-softplus), and logistic (RBPANN-logistic) activation functions for functions in cross product of the covariate or neurons and the weights for the ANN analysis. For both training and testing, 10 classical statistics (e.g., RMSE, R2, AIC, BIC, logLik) were computed for the residual values and assess the approaches for h—dbh relationship. For training and testing, the ANNs approach outperformed the NLMEM approach, and the RBPANN-tanh has the best performance in both training and testing phases.

In this work, we propose a generalized partially functional linear model, which not only models the relationship between multiple scalar and functional predictors and response, but also automatically estimates the link function. Specifically, we use the functional principal component analysis method to reduce the dimensionality of functional predictors, estimate the regression coefficients using the maximum likelihood estimation method, estimate the link function using the method of local linear regression, iteratively obtain the final estimator, and prove the asymptotic normality of the estimator. The asymptotic normality is illustrated through simulation experiments. Finally, the proposed model is applied to study the influence of environmental, economic, and medical levels on life expectancy in China. In the study functional predictors are the daily air quality index, temperature, and humidity of 58 cities in 2020 and scalar predictors are GDP and number of beds in hospitals.

Due to the inclusion of both the principles and divination methods, the study of Yijing (Yijing) becomes more complex. The complex data types, diverse semantic relationships, and unclear influencing mechanisms in Yijing pose challenges to its scientific research. Knowledge graph, as an advanced way of organizing knowledge, can provide technical support in exploring the hidden connections and knowledge structure within text resources. This paper proposes a method of constructing a Yijing knowledge graph based on Neo4j. By analyzing the concepts, entities, and various related relationships in Yijing, the method discusses the basic architecture, data model, and implementation steps of constructing the Yijing knowledge graph. It also extracts, integrates, and structures the Yijing knowledge, allowing for inquiries, associations, and reasoning about the knowledge and its various elements. By adopting a top-down approach, the paper reconstructs the fundamental knowledge system of the Yijing, including yin-yang, the five elements, generation and restriction, 64 hexagrams, and six lines(yao). It establishes a knowledge graph pattern layer and a data layer that encompass concepts, attributes, and relationships. With the technical support of the Neo4j platform, the visualization and retrieval of Yijing knowledge are realized, providing new ideas and methods for studying the mechanisms of the Yijing. The proposed method of constructing a Yijing knowledge graph can be expanded to other types of ancient scripture knowledge graph research and can be applied to the field of digital humanities, promoting in-depth cross-disciplinary research and integration.

With global climate change and resource constraints looming large, sustainable design has become a focus of attention for all industries. The purpose of this study was to investigate the attitudes and behavioural intentions of undergraduate fashion design students towards sustainable fashion practices. Undergraduate fashion design students (n = 441) from three universities in Guangdong Province, China, participated in this survey. By constructing different scales of environmental knowledge, attitude towards sustainable fashion practice and behavioural intention towards sustainable fashion practice, and by using structural equation modelling to analyse the relationship between environmental knowledge and sustainable fashion practice, the following conclusions were drawn: (1) environmental knowledge has a positive effect on attitude towards sustainable fashion practice (p＜0.05); (2) environmental knowledge has a positive effect on behavioural intention towards sustainable fashion practice (p＜0.05); (3) Subjective norms has a positive effect on behavioural intention towards sustainable fashion practice (p＜0.05). (4) Attitudes towards sustainable fashion practice play a mediating role in the relationship between environmental knowledge and intentions towards sustainable fashion practice behaviour (p＜0.05). The findings of this study have implications for environmental education for undergraduate fashion design students and for sustainable production in companies.

CO2 is widely used in the prevention and control of coal spontaneous combustion. In this manuscript, three low-rank coals with different metamorphic degrees were selected as the research objects. The temperature-programmed experiments, in-situ infrared cooling experiments, simulation of competitive adsorption of CO2 and O2 in coal pores, and simulation study of CO2 inhibition of coal oxygen composite reaction were used to obtain the role and effect of CO2 in preventing oxygen adsorption in coal at low-temperature oxidation stage. It is concluded that CO2 can displace the O2 near the pore wall to physically prevent the adsorption of O2. Through the change law of heating rate and kinetic analysis, it is found that CO2 can increase its activation energy by 5.3%-108.3% during the slow heating stage of coal, and reduce its heating rate. At around 120°C, coal loses the protective effect of CO2. From the changes of functional groups, it can be seen that when coal is cooled in CO2 atmosphere, mainly pyrolysis and condensation reactions occur due to the lack of O2. In addition, CO2 can also inhibit the chain reaction of coal's chemical adsorption of oxygen. This work provides a theoretical basis for CO2 prevention and control of coal spontaneous combustion.

S-licarbazepine was prepared by asymmetric reduction of oxcarbazepine with interface-assembled carbonyl reductase at the interface of oil/water biphasic system. The carbonyl reductase was conjugated with polystyrene in the surface of toluene/Tris-HCl biphasic system and formed a surfactant-like structure. The conversion and enantiometric excess of S-licarbazepine reached 97.39% and 99.6% when 3.97 mmol/L oxcarbazepine was reduced by interface-assembled carbonyl reductase with 60 g/L ethanol as co-substrate in toluene/Tris-HCl(12.5:10) biphasic system at 30 °C, 180 rpm for 6 h.

Environmentally friendly lead-free K1-xNaxNbO3 (KNN) ceramics possess electromechanical properties comparable to lead-based ferroelectric materials, but cannot meet the needs of device miniaturization, and the corresponding thin films lack of theoretical and experimental studies. To this end, we developed the nonlinear phenomenological theory for ferroelectric materials to study the effects of non-equiaxed misfit strain on the phase structure, electromechanical properties and electrical response of K0.5Na0.5NbO3 epitaxial films and constructed the in-plane misfit strain (u1-u2) phase diagrams. The results show that K0.5Na0.5NbO3 epitaxial film under non-equiaxed in-plane strain can exhibit abundant phase structures, including orthorhombic a1c, a2c and a1a2 phases, tetragonal a1, a2 and c phases, and monoclinic r12 phases. Moreover, in the vicinity of a2c-r12, a1c-c and a1a2-a2 phase boundaries, K0.5Na0.5NbO3 epitaxial films exhibit excellent dielectric constant ε11, while at a2c -r12 and a1c-c phase boundaries large piezoelectric coefficient d15 is observed. It was also found that high permittivity ε33 and piezoelectric coefficients d33 exist near the a2c - a2, r12- a1a2 and a1c-a1 phase boundaries due to the existence of polymorphic phase boundaries (PPB) in the KNN system, which makes it easy to polarize near the phase boundaries, and the polarizability changes suddenly, leading to electromechanical enhancement. In addition, the results show that the K0.5Na0.5NbO3 thin films possess a large electrocaloric response at the phase boundary at the r12-a1a2 and a1c-a1 phase boundaries. And the maximum adiabatic temperature change ∆T is about 3.62 K when the electric field change is 30 MV/m at room temperature, which is significantly enhanced compared with equiaxed strain. This study provides theoretical guidance for obtaining K1-xNaxNbO3 epitaxial thin films with excellent properties.

In order to effectively utilize red mud and reduce its occupation of land resources as well as its impact on the environment, experiments were conducted to develop stabilized soil materials using nano-SiO2 synergistically modified red mud and to investigate the curing mechanism of stabilized soil. The unconfined compressive strength, microscopic morphology and curing mechanism of the red mud-based stabilized soil materials with different amounts of modified materials were investigated. The test results show that after 7-days curing, the unconfined compressive strength of red mud-based stabilized soil meets the compressive strength requirement of road base material when nano-SiO2, gypsum and cement are synergistically modified. In such case, the soil structure has the lowest fracture rate and the best structural compactness when the amount of nano-SiO2 is 1%; It is found that the needle-like and columnar calcium alumina in the modified red mud-based stabilized soil increases, and the binding energy of hydration product ions in the modified material is improved; The chemical curing mechanism of modified red mud-based stabilized soil includes hydration reaction, volcanic ash reaction, promotion effect of nano-SiO2, and enhancement effect of gypsum. On this base, a model of early start hydration process of red mud-based stabilized soil promoted by nano-SiO2 is established.

Portland cement emits large amounts of CO2 in production. Given proposals for "carbon peaking and carbon neutralization" studying alternative low-carbon cementitious materials to reduce emissions is extremely important. Alkali-activated slag (AAS) cement, a new green cementitious material, has high application potential. The chemical corrosion resistance of AAS concrete is important for ensuring durability and prolonging service life. Studying the chemical corrosion mechanism of AAS concrete and understanding its influence on performance provides important theoretical foundations for application in different environments.

The quality of healthcare services is a very important indicator of social welfare in developed and emerging countries. Good quality levels are critical to ensuring patient safety, improving health outcomes, increasing patient satisfaction, optimizing resource utilization, and meeting regulatory requirements. The stable and sustainable operation of medical institutions urgently requires the establishment of a reliable and effective medical quality performance evaluation platform. However, the complexity of the evaluation process, involving numerous evaluators and the consideration of different subjective and objective criteria, poses significant challenges and essentially constitutes a group multi-criteria decision-making problem. This article uses the overall medical environment of the institution, medical service attitude, medical security, administrative service measures, etc. as measurement standards to deal with this challenge. It proposes a medical service quality measurement model suitable for both qualitative and quantitative analysis. In view of the heterogeneity of information, the two-tuple fuzzy language calculation method is introduced to enable evaluators to skillfully manage diverse information and effectively avoid potential information omission problems in the subjective evaluation integration process. The effectiveness and feasibility of the model were demonstrated by applying it to the operational framework of a medical institution in central Taiwan.

Polo-like kinase 1 (PLK1) plays a pivotal role in cell division regulation and emerges as a promising therapeutic target for cancer treatment. Consequently, the development of small-molecule inhibitors targeting PLK1 has become a focal point in contemporary research. The adenosine triphosphate (ATP)-binding site and the polo-box domain in PLK1 present crucial interaction sites for these inhibitors, aiming to disrupt the protein's function. However, designing potent and selective small-molecule inhibitors can be challenging, requiring a deep understanding of protein-ligand interaction mechanisms at these binding sites. In this context, our study leverages the fragment molecular orbital (FMO) method to explore these site-specific interactions in-depth. Through the FMO approach, we used the FMO method to elucidate the molecular mechanisms of small-molecule drug binding to these sites to design PLK1 inhibitors that are both potent and selective. Our investigation further entailed a comparative analysis of various PLK1 inhibitors, each characterized by distinct structural attributes. This comparison enhanced our understanding of the structure-activity relationships of these inhibitors, underscoring the efficacy of the FMO method in identifying critical binding features and predicting binding modes for small-molecule ligands. Furthermore, Our research spotlighted "hot spot" residues instrumental for selective and robust PLK1 binding. Our findings offer profound insights, priming the rational design of innovative potential PLK1 inhibitors with significant implications for developing anticancer therapeutics.

The essence of cross-modal generation and retrieval modeling for image-text interactions lies in semantic consistency. Among these, cross-modal representation alignment serves as the foundational requirement for achieving cross-modal semantic consistency. The crux of our proposed method entails the collaborative training of an image captioning model(referred to as the ’captioner’) and a pair of contrastive encoders for image-text matching(referred to as the ’concoder’). This synergistic approach yields concurrent enhancements in concoder’s performance, captioner’s proficiency, and cross-modal semantic coherence. We coin the proposed method as ‘ReCap’. To begin, we initialize the concoder through knowledge distillation from a pre-trained model. During the training process, we use the output of the initialized concoder as input to a residual attention network, jointly training it with the captioner to achieve semantic consistency. Subsequently, we iteratively update the concoder during the image-text momentum encoding phase using the residual attention network, creating a closed-loop for semantic consistency resolution. Upon completion of training, the concoder and captioner modules can be used independently to perform tasks related to cross-modal retrieval and cross-modal generation of text and images. In order to substantiate the efficacy of our proposed method, we initially conducted empirical experiments encompassing image-text retrieval and image captioning tasks, employing a widely recognized benchmark dataset, MSCOCO. Subsequently, we assessed the fine-grained cross-modal alignment performance of the concoder through an image classification task on the iNaturalist 2018 dataset. The achieved performance metrics notably surpassed those achieved by several incumbent state-of-the-art models, thus validating the proficiency of our method. Finally, motivated by the practical requirements of handling the nature conservation image data, we performed caption annotation for the iNaturalist 2018 dataset. Subsequently, we trained the ReCap on this annotated data. Experimental results demonstrate that our proposed method can maintain semantic consistency between cross-modal retrieval and image caption generation for species with similar visual features but distinct semantics. This achievement signifies a meaningful exploration in the field of cross-modal semantic consistency representation, holding significant practical value in the domain of biological research.

With the disruption of digital technologies, customers have emerged as co-producers in order to reduce costs and enhance productivity. Customer-driven business logic recognizes customer capabilities and sustainable innovation as key factors in the performance of customized manufacturing enterprises. The potential relationship between customers and producers has become a new area of inquiry. Existing research rarely delves into the impact of customer predictive ability on the process of customized production activities, particularly in relation to sustainable innovation, which remains inadequately characterized. Ships serve as a typical representation of customized enterprises. This study explores the underlying drivers of sustainable innovation through customer demand orientation by examining 20-year historical patterns in the global shipping and shipbuilding markets, considering the environmental dependency and temporal correlation characteristics of the shipbuilding market (producers) and the shipping market (consumers). By employing time series and panel data in a machine learning algorithm, specifically the random forest model, the study reveals a strong and statistically significant correlation between new ship deliveries and the Baltic Dry Index (BDI), with larger value ships having a more pronounced impact on the consumer market. The correlation analysis confirms that these two variables, in combination, can comprehensively reflect customer predictive ability and serve as crucial decision criteria for customer investment in new ship production. Furthermore, based on principal component analysis of customer predictive ability and ship innovation levels, as well as Granger causality tests, the study demonstrates that customer predictive ability is a Granger cause of sustainable innovation in customized production. Customer predictive ability influences sustainable innovation in customized enterprises to varying degrees. This research provides valuable insights for shipbuilding companies in terms of engaging in sustainable innovation in international markets and understanding the value of international market customers.

The escalating prevalence of particulate matter (PM) has raised serious concerns regarding its detrimental effects on human health. This study aimed to investigate the potential of fermented blueberry and black rice (FBBR) in mitigating the effects of PM2.5, both in SH-SY5Y cells and mice exposed to PM2.5. Various assays, including MTT, NO, western blot, ELISA, and behavioral studies (MWM and Y-maze) were conducted. Our results demonstrated that PM2.5 induced significant cytotoxicity and elevated nitric oxide (NO) production at a concentration of 100μg/mL of PM2.5 in SH-SY5Y cells. Additionally, administration of FBBR effectively attenuated PM2.5-induced cytotoxicity and suppressed NO production in SH-SY5Y cells. In an intranasal instilled mice model, exposure to 10 mg/kg body weight of PM2.5 resulted in cognitive impairments. However, FBBR treatment ameliorated these impairments in both the Y-maze and MWM tests in PM2.5-exposed mice. Furthermore, FBBR administration increased the expression of brain-derived neurotrophic factor (BDNF) and reduced inflammatory markers in the brains of PM2.5-exposed SH-SY5Y cells. These findings underscore the detrimental effects of PM2.5 on the nervous system and highlight the potential of FBBR as a nutraceutical agent for mitigating these effects. Overall, this study emphasizes the urgency of addressing the harmful impact of PM2.5 on the nervous system and suggests the promising role of FBBR as a protective intervention against the adverse effects associated with PM2.5 exposure.

The deformation monitoring information of concrete dams contains some high-frequency com-ponents, and the high-frequency components are strongly nonlinear, which reduces the accuracy of dam deformation prediction. In order to solve such problems, this paper proposes a concrete dam deformation monitoring model based on empirical mode decomposition (EMD) combined with wavelet threshold noise reduction and sparrow search algorithm (SSA) optimization of long short-term memory network (LSTM). The model uses EMD combined with wavelet threshold to decompose and denoise the measured deformation data. On this basis, the LSTM model based on SSA optimization is used to mine the nonlinear function relationship between the reconstructed monitoring data and various influencing factors. The example analysis shows that the model has good calculation speed, fitting and prediction accuracy and it can effectively mine the date char-acteristics inherent in the measured deformation, and reduce the influence of noise components on the modeling accuracy.

In order to effectively utilize red mud, an aluminum industrial waste, the stabilized soil material was developed using nano-SiO2 synergistically modified red mud, and the strength characteristics of the stabilized soil were analyzed to clarify the feasibility of such stabilized soil serves as a road base material. Through different combination schemes, the effects of different nano-SiO2 and cement contents on the strength of the stabilized materials were explored. The test results show that: in the synergistic modification of nano-SiO2 and cement, nano-SiO2 can significantly improve the early unconfined compressive strength of red mud-based stabilized soil; in the synergistic modification of nano-SiO2, gypsum and cement, the 7-d unconfined compressive strength of red mud-based stabilized soil is greater than 2 MPa, which meets the strength requirements of road base materials and shows the superiority of synergism. The nominal stress-strain curves are divided into five stages: compressed and compacted stage, elastic deformation stage, plastic deformation stage, damage deformation stage and residual deformation stage. The macroscopic compressive damage pattern of the specimens shows that the modified red mud-based stabilized soil mostly exhibits brittle damage.

Deep learning methods have been widely used in PolSAR image classification. To learn the polarimetric information, many deep learning methods expect to learn high-level semantic features from original PolSAR data. However, only original data cannot learn multiple scattering features and complex structures for extremely heterogeneous terrain objects. In addition, deep learning methods always cause edge confusion due to the high-level features. To overcome these shortages, we propose a double-channel CNN network combined with an edge-preserving MRF model(DCCNN-MRF) for PolSAR image classification. Firstly, to combine complex matrix data and multiple scattering features together, a double-channel convolution network(DCCNN) is developed, which consists of a Wishart-based complex matrix and multi-feature subnetworks. The Wishart-based complex matrix network can learn the statistical characteristics and channel correlation well, and the multi-feature network can learn high-level semantic features well. Then, a unified network framework is designed to fuse two kinds of features to enhance advantageous features and reduce redundant ones. Finally, an edge preserving MRF model is designed to combine with the DCCNN network. In the MRF model, a sketch map-based edge energy function is designed by defining adaptive weighted neighborhood for edge pixels. Experiments are conducted on four real PolSAR data sets with different sensors and bands. Experimental results demonstrate the effectiveness of the proposed DCCNN-MRF method.

As a high-quality forestry product with excellent performance, particleboard is widely used in many fields and has great market potential. At present, it is a research difficulty to accurately identify small, fine and different shapes of defects on the whole particleboard through machine vision technology. The application of image super-resolution reconstruction technology on particleboard can improve the surface image quality of particleboard, which is conducive to the subsequent improvement of defect detection accuracy. In this study, super-resolution dense attention generative adversarial network (SRDAGAN) model was improved to solve the problem that super-resolution generative adversarial network (SRGAN) reconstructed image would produce artifacts and its performance needed to be improved. The Batch Normalization (BN) layer was removed, the convolutional block attention module (CBAM) was optimized to construct dense block, and the dense blocks were constructed by densely skip connection. Then, the corresponding 52400 image blocks with high resolution and low resolution were trained, verified and tested according to the ratio of 3:1:1. The model was comprehensively evaluated from the effect of image reconstruction and the two indexes of PSNR and SSIM. It was found that compared with BICUBIC and SRGAN, PSNR index of SRDAGAN increased by 4.88dB and 3.25dB respectively, and SSIM increased by 0.0507 and 0.1122 respectively. The reconstructed images not only had clearer texture, but also had more realistic expression of various features, and the performance of the model had been greatly improved. At the same time, this study also emphatically discussed on the image reconstruction effect with defects. The result showed that the SRDAGAN proposed in this study can complete the super-resolution reconstruction of particleboard images with high quality. In the future, it can also be further combined with defect detection for actual production to improve the quality of forestry products and increase economic benefits.

This study reports multivariate statistical techniques applied including cluster analysis to evaluate and classify the river pollution level in Taiwan, and principal component analysis-multiple linear regression (PCA-MLR) to identify the possible pollution source. Water quality and heavy metal monitoring data from Taiwan Environmental Protection Administration (EPA) was evaluated for 14 rivers in the four regions of Taiwan. The Erren River was classified as the most polluted River in Taiwan. Biochemical oxygen demand, ammonia, and total phosphate concentration in this river were the highest of the 14 rivers evaluated. In addition, heavy metal levels of the following rivers exceeded the Taiwan EPA standard limit: lead - in the Dongshan, Jhuoshuei, and Xinhuwei Rivers; copper - in the Dahan, Laojie, and Erren Rivers; and manganese - in all rivers. Water pollution in the Erren River was estimated to originate 72% from industrial sources, 16% from domestic black water, and 12% from natural sources and runoff from other tributaries. Our research showed that PCA-MLR and the cluster analysis model accomplished our study objectives and will be helpful tools to evaluate water quality in rivers and we suggest that the continuous monitoring should be conducted to monitor water pollution from anthropogenic activities.

Accurate prediction of the degree of airport delays under the influence of convective weather is crucial for collaborative traffic management implementation and improving the efficiency of airport operations. However, existing studies usually only consider numerical-type quantitative features of weather-affected traffic in their models, and lack the introduction of spatial information to comprehensively portray the traffic operation scenarios under the influence of weather. In order to overcome this problem, this paper firstly designs a new image representation of weather-affected air traffic, and constructs a multi-channel traffic and weather scene image (MTWSI) by populating the airspace two-dimensional grid with traffic and meteorological information to represent the overall traffic operation situation in the terminal area under the influence of convective weather; then, a deep convolutional neural network-based airport delay prediction model ( ADLCNN), which takes MTWSI images as input and uses a specific CNN model to extract the deep features that affect traffic operation in it to input into the subsequent classification algorithm to predict the flight delay level; finally, a series of comparative experiments are carried out on the operational data of Guangzhou Baiyun Airport, and the experimental validation shows that, compared with the traditional machine learning methods, the proposed CNN-based airport delay prediction The experimental validation shows that the proposed CNN-based airport delay prediction model has satisfactory prediction performance compared with the traditional machine learning methods, which also proves that the proposed MTWSI method can more comprehensively respond to the real traffic conditions.

Seeds stored for a prolonged period are subject to aging and reduction in germination potential (GP), which will negatively affect seed sales. Rare-earth elements have a synergistic effect on the improvement of seed GP. In this study, we examined the effects of neodymium on biochemical components, the antioxidant protective system, and metabolism-related enzymes during germination of naturally and artificially aged seeds of three wheat cultivars. Seed germination indices, biochemical substance contents, and enzyme activities decreased after seed aging. Soaking seeds in neodymium nitrate solution revived aged wheat seeds at an optimal concentration of 20 µmol/L for 8 h. Soaking in neodymium nitrate solution increased the GP (by 2.25%–60.9%), germination index (by 1.69%–29.2%), and vigor index (by 3.36%–18.7%) of aged seeds. Compared with non-soaked seeds, soaking significantly changed the contents of biochemical substances, and the activities of antioxidant protective enzymes and metabolic enzymes in seedlings were increased. Soaking with neodymium may revive aged seeds by regulating the synthesis of soluble sugars, soluble proteins, chlorophyll, and carotenoids, and decomposing malondialdehyde, in the germinating seed. Root dehydrogenase and amylase showed different responses to the aging modes. The differential responses of root dehydrogenase and amylase may reflect differences in the resistance of enzymes to long-term mild seed aging and short-term severe environmental aging.

The digital revolution has significantly impacted many Chinese Time-Honored businesses, particularly those slow to adapt to environmental changes, resulting in challenges related to long-term marketing capabilities and declining performance. This study explores the relationship between ambidextrous marketing capabilities and corporate performance. Utilizing a survey involving 91.8% of middle and upper-level managers across 47 Chinese time-honored firms, we construct a research model that demonstrates how the application of ambidextrous marketing capabilities can foster the development of Sustainable marketing capability, which in turn positively influence corporate performance. Sustainable marketing capability mediate the effect of ambidextrous marketing capabilities on corporate performance. Additionally, enhancements in market conditions or legislation may further amplify the impact of Sustainable marketing capability on business performance. In the context of Chinese time-honored firms, these findings offer managerial insights into building Sustainable marketing capability, enhancing performance, and achieving competitive advantages.

Diatomite (DME) consists of natural ordered porous structures that are excellent candidates as microcontainers. However, to the best of our knowledge, the application of DME loaded with corrosion inhibitors in anti-corrosion coatings has not hitherto been reported. In this study, DME has been used as a source of microcontainers to load benzotriazole (BTA) inhibitor by an immersion method. In order to prevent unwanted early release of the small molecule BTA inhibitor from the DME microcontainers, inspired by the adhesion characteristics of catechol and amine in mussel adhesion protein, polydopamine (PDA) was coated on their surfaces to generate BTA@DME/PDA microcapsules. Because of the depolymerization characteristics of PDA at low pH, the synthesize microcapsules showed a controllable release function. The SEM morphology, chemical structure, and loading capacity of the synthesized BTA@DME/PDA microcapsules were characterized. The corrosion resistances of epoxy coatings with different contents of BTA@DME/PDA microcapsules were compared by saline immersion and electrochemical impedance tests. A scratched coating with 5wt.% BTA@DME/PDA microcapsules showed the best anti-corrosion effect.

Although Eulerian approaches are standard in computational acoustics, they are less effective for certain classes of problems like bubble acoustics and combustion noise. A different approach for solving acoustic problems is to compute with individual particles following particle motion. In this paper, a Lagrangian approach to model sound propagation in moving fluid is presented and implemented numerically, using three meshfree methods to solve the Lagrangian acoustic perturbation equations (LAPE) in the time domain. The LAPE split the fluid dynamic equations into a set of hydrodynamic equations for the motion of fluid particles and perturbation equations for the acoustic quantities corresponding to each fluid particle. Then, three meshfree methods, the smoothed particle hydrodynamics (SPH) method, the corrective smoothed particle (CSP) method, and the generalized finite difference (GFD) method, are introduced to solve the LAPE and the linearized LAPE (LLAPE). The SPH and CSP methods are widely used meshfree methods, while the GFD method based on the Taylor series expansion can be easily extended to higher orders. Applications to modeling sound propagation in steady or unsteady fluids in motion are outlined, treating a number of different cases in one and two space dimensions. A comparison of the LAPE and the LLAPE using the three meshfree methods is also presented. The Lagrangian approach shows good agreement with exact solutions. The comparison indicates that the CSP and GFD method exhibit convergence in cases with different background flow. The GFD method is more accurate, while the CSP method can handle higher Courant numbers.

Surface water plays a crucial role in climate change, human production, and life, making accurate monitoring and observation of surface water particularly important. However, due to the significant diversity and complexity of water distribution in surface space, accurate mapping of surface water faces considerable challenges. When extracting water bodies from medium-resolution satellite remote sensing images, CNN methods may suffer from limitations in receptive fields and insufficient context modeling capabilities, leading to the loss of water body boundary details and poor fusion of multiscale features. Currently, there is relatively little research on this issue; therefore, it is necessary to explore new combinations of deep learning networks to address these challenges. The purpose of this study is to address the above issues. We propose a new combination of deep learning networks that fully utilize multiscale information to enhance water features. Specifically, we first combine deformable convolutions with the Swin Transformer to increase effective receptive fields while better integrating global semantic information. This combination can capture features of water bodies at different scales, improve the accuracy and integrity of water extraction, and provide reliable technical support for detailed water body extraction. We tested the newly constructed model using Sentinel-2 satellite images. Our model achieved results of over 90%, with an average accuracy of 97.89%, average precision of 94.98%, average recall of 90.05%, and an average F1 score of 92.33%. In addition, our model achieved an accuracy of 98.03% in mountainous areas. Our experiments and results validate the potential of combining the Swin Transformer and deformable convolutions in detailed water body extraction.

Rosacea is a chronic inflammatory skin disease characterized by recurrent erythema, flushing, telangiectasia, papules, pustules, and phymatous changes in the central area of the face. Patients with this condition often experience a significant negative impact on their quality of life, self-esteem, and overall well-being. Despite its prevalence, the pathogenesis of rosacea is not yet fully understood. Recent research advances are reshaping our understanding of the underlying mechanisms of rosacea, and treatment options based on the pathophysiological perspective hold promise to improve patient outcomes and reduce incidence. In this comprehensive review, we investigate the pathogenesis of rosacea in-depth, with a focus on emerging and novel mechanisms, and provide an up-to-date overview of therapeutic strategies that target the diverse pathogenic mechanisms of rosacea. Lastly, we discuss potential future research directions aimed at enhancing our understanding of the condition and developing effective treatments.

This paper proposes an analytical model of the double-stator spoke-type permanent-magnet vernier machine (DSSTVM) using the subdomain model (SDM), which can be used to calculate the mag-netic field distribution and corresponding electromagnetic parameters of the DSSTVM. The whole field domain is divided into several subdomains according to the magnetic characteristics of each region, within which Laplace's and Poisson's equations are solved accordingly in terms of magnetic vector potential (MVP). Then, the magnetic flux density distribution, back electromotive force (EMF), and electromagnetic torque of the DSSTVM can be obtained correspondingly. Ultimately, finite element analysis (FEA) is adopted to validate the proposed analytical model's effectiveness for quickly predicting the no-load and on-load performances of the DSSTVM.

The accuracy of star position simulation is the key factor affecting the accuracy of ground calibration test of spacecraft attitude measurement system. To solve the impact of nonimaging polarized stray light on the simulation accuracy of star position in the optical engine of the system, the generation mechanism of non-imaging polarized stray light has been investigated, and an optimization method for polarization balance of the optical engine is proposed. The mathematical model of the incident light aperture angle and the ideal polarization parameter of the optical engine thin film is established, and the optimization evaluation function of polarization balance of the optical engine is constructed. An optical engine polarization balance film with the corresponding full-band binomial attenuation is <0.001 and the phase delay is <1°. Experimental results show that the simulation accuracy of the weak starlight simulation system is improved by 1.64 times using polarization balanced optical engine.

Based on a modified dice-and-fill technique, a PIN-PMN-PT single crystal 1-3 composite with the kerf of 12 μm and pitch of 50 μm was prepared. The as-made piezoelectric composite material behaved with high piezoelectric constant (d33 = 1500 pC/N), high electromechanical coefficient (kt = 0.81), and low acoustic impedance (16.2 Mrayls). Using lithography and flexible circuit method, a 48-element phased array was successfully fabricated from such a piezoelectric composite. The array element was measured to have a central frequency of 20 MHz and a fractional bandwidth of approximately 77% at −6 dB. Of particular significance was that this PIN-PMN-PT single crystal 1-3 composite-based phased array exhibits a superior insertion loss compared with PMN-PT single crystal and PZT-5H-based 20 MHz phased arrays. The focusing and steering capabilities of the obtained phased array were demonstrated theoretically and experimentally. These promising results indicate that the PIN-PMN-PT single crystal 1-3 composite-based high frequency phased array is a good candidate for ultrasound imaging applications.

Background: The efficacy of sunscreen is evaluated by SPF values, which are quantitatively determined in laboratories on the backs of human subjects according to a standardized procedure. However, SPF cannot be directly translated to sunburn protection under real-life situations because actual efficacy depends on various factors related to human behaviors and environmental conditions. This study clinically evaluated the efficacy of two sunscreen sprays (SPF 30 and SPF 70) under natural sunlight exposure on healthy subjects at the beach. Methods: Twenty subjects were divided into two cells for the two sunscreen sprays (SPF 70 and SPF 30) in a single-center, actual usage test. The primary endpoint of the study was sunburn protection on the dorsal arms and the secondary endpoint was protection on the face and neck. Subjects stayed at the beach for 4 h after application of the sunscreens with normal beach activities. Subjects’ behavior at the beach, the amounts of sunscreen applied and reapplied, and environmental conditions were all recorded. Results: There was no significant sunburn for a majority of the subjects in either cell. However, neither sunscreen completely blocked the sunburn, especially for the face/neck area. We found that the SPF 70 sunscreen was more effective than the SPF 30 sunscreen. Conclusion: Modern sunscreen sprays, applied liberally, are effective in providing sunburn protection for the body in a beach setting.

The conventional phytopathogen Pseudomonas syringae has been identified several significant virulence determinants against Caenorhabditis elegans, but their mechanisms of action remain elusive. Here, we report the nematicidal activity and action receptor of a methyl-accepting chemotaxis protein (MCP03) of a wild-type P. syringae MB03 against C. elegans. Purified MCP03 exhibited significant nematicidal toxicity against C. elegans, with a half-lethal concentration of 124.4 μg mL1, and detrimental effects on the growth and brood size of C. elegans. Additionally, MCP03-treated worms showed severe pathological destruction of the intestine and ovary, and depressed wrinkles of the cuticle. Through yeast two-hybrid assays, we identified a subunit of a COP9 signalosome, namely CSN-5, functionated as an action receptor of MCP03. In vitro pull-down and in vivo co-localization assays verified the binding interaction between MCP03 and CSN-5. RNA interference assays confirmed that MCP03 acts on CSN-5 to adversely affect the brood size, growth, and cuticle integrity of C. elegans. Following MCP03 infection, the expression of several genes relative to reproduction, growth, and cuticle formation, such as kgb-1, unc-98, and col-117, were significantly downregulated, which implicated the pathological changes of MCP03-treated nematodes. Thus, this study demonstrates that MCP03 acted on the receptor protein CSN-5 causing lethality and detrimental effects on the fertility, growth, and morphogenesis of C. elegans, which will provide new insights into the signaling pathways and mechanism underlying the nematicidal action of MCP03 towards C. elegans.

Evaluating the efficacy of the traceability systems (TS) plays an important role not only for planning system implementation before development, but also for analyzing system performance once the system is in use. In the present work, we evaluate the traceability granularity using a comprehensive and quantifiable model and try find its influencing factors via an empirical analysis with 80 vegetable companies in Tianjin city, China. Granularity indicators were collected mostly by the TS platform to ensure the objectivity of the data, and the granularity score was evaluated by using a TS granularity model. The results show a clear imbalance in the distribution of companies as a function of score. The number of companies (21) scoring in the range [50,60] exceeded the number in the other score ranges. Furthermore, the influencing factors on traceability granularity were analyzed by using a rough set method based on nine factors pre-selected by using a published method. The results show that the factor “number of TS operation staff” is deleted because it is unimportant. The remaining factors rank according to importance as follows: Expected revenue &gt; Supply chain (SC) integration degree &gt; Cognition of TS &gt; Certification system &gt; Company sales &gt; Informationization management level &gt; System maintenance investment &gt; Manager education level. Based on these results, the corresponding implications are given with the goal of (i) establishing the market mechanism of high price with high quality, (ii) increasing government investment for constructing the TS, and (iii) enhancing the organization of SC companies.

An optical frequency comb (OFC) generator based on an electro-optic Talbot laser and cross-phase modulation (XPM) in a high nonlinear fiber (HNLF) is designed and demonstrated. The Talbot laser is an electro-optic frequency shifting loop to produce repetition rate multiplied pulses, and these pulses working as a pump signal induce XPM process in the HNLF to modulate the phase of a probe signal. At the output of the HNLF, OFCs with a multiplied line-spacing can be generated. The effects of the pump power and the HNLF length on the performance of the generated OFCs are theoretically analyzed. In the experiments, the line-spacing of the generated OFCs is respectively multiplied to be 10 GHz, 15 GHz and 20 GHz with a factor of 2, 3 and 4. The center of the OFCs is tuned in a 4-nm range by adjusting the wavelength of the probe signal.

In March 2013, a novel avian influenza A H7N9 virus was emerged in China, which cause rapidly progressive pneumonia and with a high fatality rate. Serologic studies to evaluate neutralizing antibodies of infected patients and birds are invaluable tools for immunogenicity research of H7N9 and epidemiological investigation. Conventional neutralization assays are laborious and time-consuming which also hampered by biosafety requirement. In this study, We construct and produce pseudovirus bearing the full-length hemagglutinin (HA) of H7N9 virus in the Env-defective, luciferase-expressing HIV-1 backbone. The production of lentiviral pseudovirus was analysed by HA gene specific real-time reverse-transcription PCR, transmission electron microscopy (TEM), and Western Blot assay to prove the nucleic acid replication, the morphology of virus, and the expression of HA protein in pseudovirus. After that pseudovirus based inhibition assay was established to detect neutralizing antibodies of a panel of serum samples. Our results demonstrated that H7N9 pseudovirus which had single-cycle infection was generated. By comparing the neutralization antibody titers, pseudovirus based neutralization test could be recognized as an alternative of conventional microneutralization (MN). Hence, we conclude that it is possible to use pseudovirus inhibition assay to screen sera samples, as well as evaluate vaccine-induced neutralizing antibodies against H7N9 virus.

Molecular markers, including Simple Sequence Repeat (SSR), Single Nucleotide Polymorphism (SNP), and Intron Length Polymorphism (ILP), are widely utilized in crop improvement and population genetics studies. However, these marker resources remain insufficient for Musa species. In this study, we developed genome-wide SSR, SNP, and ILP markers from Musa and its sister species, creating a comprehensive molecular marker repository for the improvement of Musa species. This database contains 2115474 SSR, 63588 SNP, and 91547 ILP markers developed from thirteen Musa species and two of its relative species. We found that 77% of the SSR loci are suitable for marker development; 38% of SNP markers originated from the genic region, and transition mutations (C↔T; A↔G) were more frequent than transversion. The database is freely accessible and follows a ‘three-tier architecture,’ organizing marker information in MySQL tables. It has a user-friendly interface, written in JavaScript, PHP, and HTML code. Users can employ flexible search parameters, including marker location in the chromosome, transferability, polymorphism, and functional annotation, among others. These distinctive features distinguish the Musa Marker Database (MMdb) from existing marker databases by offering a novel approach that is tailored to the precise needs of the Musa research community. Despite being an in silico method, searching for markers based on various attributes holds promise for Musa research. These markers serve various purposes, including germplasm characterization, gene discovery, population structure analysis, and QTL mapping.

This research uses ARM-based FPGA to implement the computation of a virtual-real fusion hardware system. It also evaluates the acceleration effect of virtual-real fusion execution speed after connecting related hardware acceleration and provides a reference for real-time information fusion system design. The hardware uses Xilinx Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit. It also obtains color and depth images with Intel® RealsenseTM D435i depth cameras. This system receives image data through the Linux system built on the ARM and fed to the FPGA for object detection using CNN models. In addition, it develops a module for rapidly performing registration between the color images and the depth images. It can calculate the size and position of the display information on the transparent display according to the pixel coordinates and depth values of the human eye and the object. The fusion took about 47ms on a personal computer with a GPU RTX2060 and 25ms on the ZCU102. The acceleration is nearly 168%. Finally, the results were successfully transplanted into the retail display system for demonstration.

Inequality of health service for different specialty categories not only occurs in different areas inequality of health service for different specialty categories in the world, but also happens in the online service platform. In the online health community (OHC), health service was often of inequality for different specialty categories, including both online views and medical consultation for offline registered service. Moreover, how the factor city-level impacts the inequality of health service in OHC is still unknown. We designed a causal inference study with data on distributions of serviced patients and online views in over 100 distinct specialty categories on one largest OHC in China. To derive the causal effect of the city-levels (two levels inducing 1 and 0) on the Gini coefficient, we matched the focus cases in cities of rich healthcare resources with the potential control cities. For the Gini coefficient of serviced patients in over 100 specialty categories, the average treatment effect of level-1 cities is 0.470, which is 0.029 higher than that of the matched group. Similarly, for the Gini coefficient of online views, the average treatment effect of Level-1 cities is 0.573, which is 0.016 higher than that of the matched group. For each of the specialty categories, we also estimated the average treatment effect the specialty category’s Gini coefficient ( ) with the balanced covariates. The results support the argument that the total Gini coefficient of all the doctors in OHC shows that the inequality of health service is still very serious. This study contributes to the development of the theoretically grounded understanding of the causal effect of city-level on the inequality of health service in an online to offline healthcare service setting.

Previous studies have acknowledged the impact of weather changes on retail uncertainty. They primarily focus on understanding how weather conditions affect offline consumer behavior and aiming to develop effective marketing strategies. However, there is little research on the complex impact of weather on online shopping behavior. To bridge this gap, we conduct a study with a sample of 261 consumers from China with shopping experience in Community Retail Shops (CRSs). We utilize the S-O-R model and theories including meteorological emotional effect theory, emotional coherence and meteorological psychology to propose and validate models elucidating the relationship between weather and consumers' online shopping behavior in CRS. Our findings reveal that weather conditions affect consumers' spending patterns and purchase diversity, mediating by consumers' emotion and risk aversion, when they comfortably shop online at home. Furthermore, employing the fsQCA model, we identify the critical path through which weather conditions and consumer types influence risk aversion awareness. The results provide management implications for retailers to develop online marketing strategies for different consumer types.

The nature of the fracture and fragmentation process of concrete medium under blast loading is the transformation process of the medium from continuum to discontinuity, coupled with the significant rate correlation of concrete medium, its mechanical behavior presents a high degree of complexity. Problems such as grid distortion and even negative volume are often encountered in the finite element method and others when solving this problem, while the material point method can effectively avoid these problems. In addition, the widely used HJC concrete constitutive model does not take into account the segmented characteristics of the calculation function for dynamic increasing factor. Therefore, in this paper, firstly, the calculation function for dynamic increasing factor in the HJC concrete model is modified by SHPB experiment, and the improved HJC concrete model is proposed; secondly, the material point method simulation program is developed, and the improved HJC concrete model is embedded into the simulation program; finally, the simulation program is verified by numerical examples, and the results show that the developed simulation program can better simulate the fracture and fragmentation process of concrete medium under blast loading, especially the pulverization characteristics of the medium in the near zone of the load.

The concentration of heavy metals in sediment is an important factor for assessing the quality of the nearshore environment. Geochemical background values are the normal concentrations of heavy metals in the natural environment. The use of different background values results in different evaluation results. Heavy metal (Cu, Pb, Zn, Cr, Cd, As, and Hg) concentration profiles along a sediment core were investigated to obtain background values and assess the depositional processes and contamination levels in Laizhou Bay. Apart from As and Hg, all other metals had similar distribution patterns and could be divided into four stages since marine isotope stage (MIS) 2. The results of the enrichment factor, geoaccumulation index, Pearson’s correlation coefficient, Nemerow pollution index, principal component analysis, and potential ecological risk index showed that element enrichment or contamination in the core sediments was absent and that all heavy metals were mainly naturally sourced. The changes in heavy metals since MIS 2 in the core sediments were predominantly related to the sedimentary environment, sediment sources, and mean grain size. The average values of the heavy metals in the U2 unit formed during the Middle Holocene can be used as reference values for background values.

The construction industries face several challenges related to productivity. Productivity mainly depends upon labour effort and performance. The poor productivity of labour is one of the major reasons of time over-runs and increasing cost in construction projects. Our study aims to build a comprehensive assessment on the relationship between various factors that affect labour productivity in the construction of prestressed concrete Buildings in Ghana. A sample of 200 re-spondents collected from workers of Construction Company in Ghana. The questionnaire was designed which comprises two parts; the first part contains background information of the staff of construction company while second section explores the opinion of the staff regarding factors af-fecting labour productivity. The Smart-PLS was utilized to analyze and estimate the relationship among construct variables. By utilizing relative importance index and multiple linear regressions, it is identified that the management factor such as inadequate incentives; material factor such as poor quality of material; labour factors such as poor quality and training of labors; supervision factor such as incompetence of site supervisor; equipment factor such as frequent damage of equipment have a negative and significant relationship with labour productivity in the construc-tion of prestressed concrete buildings in Ghana. The findings of this study recommend that in order to improve labour productivity, the construction industries must conduct labour productivity measurements by adopting schedule for procurement of materials, safety programs, motivational system, and frequent meeting with project professionals.

Background and Objectives: Treatment for antineutrophil cytoplasmic antibody-associated vasculitis (AAV) must deal with immunosuppression as well as infections associated with compromised immune system, such as tuberculosis (TB). Our aim was to overcome the gap in the literature concerning the risk of incidental TB after diagnosis of AAV. Materials and Methods: This retrospective population-based cohort study was based on the data from the National Health Insurance Research Database in Taiwan. We used a novel algorithm to identify patients with newly diagnosed granulomatous polyangiitis (GPA) or microscopic polyangiitis (MPA) between January 1, 2000 and December 31, 2012. The primary outcome was risk of incidental TB. Cox proportional hazard models were used to evaluate the association between AAV and incidental TB. Results: A total of 2,257 patients with AAV and a propensity-score matched cohort of 9,028 patients were studied. Overall, patients with AAV were at a 1.48x higher risk of contracting incidental TB than were patients in the matched cohort (adjusted HR 1.48; 95% confidence interval [CI], 1.02-2.15). Note that the highest risk of contracting incidental TB was in the first two years following a diagnosis of AAV, with a nearly 1-fold increase in risk (adjusted HR, 1.91; 95% CI, 1.01-3.60). Female AAV patients were 3.24x more likely than females without AAV to develop TB (adjusted HR 3.24; 95%CI, 1.85-5.67). Conclusion: Patients with AAV face an elevated risk of contracting incidental TB, particularly within the first two years after AAV diagnosis. The risk of contracting TB is higher among female AAV patients than among females without AAV.

In the development of a digital twin (DT) for hydropower turbines, dynamic modeling of the system (e.g., penstock, turbine, speed control) is crucial, along with all the necessary data interface, virtualization, and dashboard designs. Since the DT must mimic the actual dynamics of the hydropower turbine accurately, adaptive learning is required to train these dynamic models online so that the models in the DT can effectively follow the representation of the actual hydropower turbine dynamics accurately and reliably. This study presents an adaptive learning method for obtaining the hydropower turbine models for DT development of hydropower systems using recursive least squares algorithm. To simplify the formulation, the hydropower turbine under consideration was assumed to operate near a fixed operating point, where the system dynamics can be well represented by a set of linear differential equations with constant parameters. In this context, the well-known six-coefficient model for the Francis turbine was formulated as the starting point to obtain input and output models for the turbine. Then, an adaptive learning mechanism was developed to learn model parameters using the real-time data from a hydropower turbine testing system. This led to a semi-physical modeling in which the first principles and data-driven modeling are integrated to produce dynamic models for the DT development. Applications to a pilot system at the Norwegian University of Science and Technology (NTNU) were made, and the models learned adaptively using the data collected from the university’s pilot system. Desired modeling and validation results were obtained.

In this work, we propose a generalized partially functional linear regression model with an interaction term between functional predictors. The estimators of the regression coefficient of scalar predictors and regression coefficient functions of functional predictors and their interactions are obtained. The asymptotic property of the estimators is established. Extensive simulation studies illustrate the asymptotic results. Finally, the proposed model was applied to investigate the influence of air qualities, climate factors, medical and social indicators and the interactions on cancer incidence which is a binary response.

Crawling robots are the focus of intelligent inspection research, and the main feature of this type of robot is the flexibility of in-plane attitude adjustment. The crawling robot HIT_Spibot is a new type of steam generator heat transfer tube inspection robot with a unique mobility capability different from traditional quadrupedal robots. This paper introduces a hierachical motion planning approach for HIT_Spibot, aiming to achieve efficient and agile maneuverability. The proposed method integrates three distinct planners to handle complex motion tasks: a nonlinear optimization-based base motion planner, a TOPSIS-based base orientation planner, and a Mask-D3QN (MD3QN) algorithm-based gait motion planner. Initially, the robot's base and foot workspace are delineated through envelope analysis, followed by trajectory computation using Larangian methods. Subsequently, the TOPSIS algorithm is employed to establish an evaluation framework conducive to foundational turning planning. Finally, the MD3QN algorithm trains foot points to facilitate robot movement along predefined paths. Experimental results demonstrate the method's adaptability across diverse tube structures, showcasing robust performance even in environments with random obstacles. Compared to the D3QN algorithm, MD3QN achieves a 100% success rate, enhances average overall scores by 6.27%, reduces average stride lengths by 39.04%, and attains a stability rate of 58.02%. These results not only validate the effectiveness and practicality of the method but also showcase the significant potential of HIT_Spibot in the field of industrial inspection.

Activated carbon (AC) is an effective adsorbent for creatinine removal in hemoperfusion. However, the hemocompatibility and adsorption capacity of AC was required to be improved furthermore. Heparin, a widely used anticoagulant biomacromolecule, could improve the hemocompatibility of the absorbents in different ways based on its molecular weight. Thus, it was necessary to study the surface modification with unfractionated heparin (UFH) or low molecular weight heparin (LMWH) on improvement of hemocompatibility and adsorption. In this study, UFH and LMWH were respectively grafted on AC through polyethyleneimine as an intermediate layer. The modification of AC about morphology, mechanical strength and pore structure was characterized by XPS, SEM, TA and BET. It was found that compared with AC, the morphology and mechanical strength AC-UFH and AC-LMWH could be well maintained, but the BET surface was decreased due to the grafting of macromolecules. Furthermore, AC-UFH and AC-LMWH showed the better hemocompatibility on protein adsorption, APTT and platelet activation compared with AC, in which AC-LMWH had lower fibrinogen adsorption and longer APTT than AC-UFH. Besides, it was found that AC, AC-UFH and AC-LMWH had no significant effect on blood cell composition. Finally, the adsorption capacity of adsorbents for creatinine was evaluated. Although there was no significant difference between AC-UFH and AC-LMWH, it was found that heparin could be interacted with creatinine to enhance the adsorption capacity when compared with AC-PEI. This study deepened the understanding of anticoagulation of heparinized surface and provided a theoretical basis for adsorbents in hemoperfusion.

Andrographis paniculata leaves have been widely used in traditional medicine due to their rich content of phenolic compounds. In this study, we evaluated the total phenolic and flavonoid content of Andrographis paniculata leaf extracts (ALE), as well as its antioxidant activities against DPPH, ABTS, and hydrogen peroxide radicals. Additionally, we conducted cell viability assays, RT-PCR, and western blot analysis to investigate the biochemical effects of ALE on UVB-induced HaCaT cells. Our results revealed that ALE exhibited a high concentration of polyphenols and flavonoids, which were associated with potent abiotic antioxidant properties. Furthermore, ALE treatment effectively abrogated the damage caused by UVB radiation on key molecules such as hyaluronan synthase 1, Aquaporin 3, and loricrin in HaCaT cells. ALE also demonstrated the ability to reduce the overactivation of mitogen-activated protein kinases (MAPKs) and the expression of pro-inflammatory cytokines, including interleukin-6 and interleukin-1β in UVB-induced HaCaT cells. Additionally, ALE positively influenced the peroxisome proliferator-activated receptor alpha in these cells. Overall, our findings highlight the antioxidant and anti-inflammatory effects of ALE, as well as its significant role in modulating skin barrier functions. These results contribute to the growing body of evidence supporting the therapeutic potential of ALE in skincare and dermatological applications.

As research into the relationship between the gut microbiome and health continues to evolve, probiotics are garnering increasing interest among consumers. Fermentation is rec-ognized as an efficacious biotechnology for augmenting the nutritional and functional at-tributes of foods. In this study, the ameliorative effects of Lycium barbarum L. lyophilized powder fermented with Lactobacillus plantarum NXU0011 (LP+Ly) on dextran sodium sul-fate (DSS)-induced ulcerative colitis (UC) in mice were investigated employing immuno-histochemistry, qRT-PCR, macrogenomics, and metabolomics. The results revealed that LP+Ly intervention significantly ameliorated histopathological inflammation in the ulcer-ated colon, diminished the expression of inflammatory markers such as IL-6, P-STAT3, and miR-214, and enhanced the diversity of intestinal flora in the mouse model group. Moreover, there was an increase in abundance of beneficial bacteria, including Lactobacillus, Prevotella, and Akkermansia. Metabolomic analysis indicated that 15 metabolites, including citrulline, D-xylose, and α-ketoisovaleric acid, exhibited significant variations following LP+Ly inter-vention. The metabolic pathways that displayed substantial differences included tryptophan biosynthesis, arginine biosynthesis, and amino sugar and nucleotide sugar metabolism. By modulating arginine biosynthesis, LP+Ly effectively improved the intestinal inflammatory state, thus mitigating the effects of UC.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the novel coronavirus responsible for the coronavirus disease 2019 (COVID-19) pandemic, represents a serious threat to public health. The spike (S) glycoprotein of SARS-CoV-2 mediates viral entry into host cells and is heavily glycosylated. In this study, we systemically analyzed the roles of 22 putative N-linked glycans in SARS-CoV-2 S protein expression, membrane fusion, viral entry, and stability. Using α-glycosidase inhibitors, castanospermine and NB-DNJ, we confirmed that disrupting the N-linked glycosylation process blocked the maturation of the S protein, leading to impairment of S protein-mediated membrane fusion. Single substitution of each of the 22 N-linked glycosylation sites with glutamine revealed that 9 out of the 22 N-linked glycosylation sites were critical for S protein folding and maturation, resulting in reduced S protein-mediated cell-cell fusion and viral entry. Of note, N1074Q mutation markedly affected S protein stability and induced significant receptor-independent syncytium (RIS) formation in HEK293T/hACE2-KO cells, and removal of the furin-cleavage site partially compensated instability of N1074Q mutation. Although the corresponding mutation in the SARS-CoV S protein (N1056Q) did not induce RIS in HEK293T cells, the mutants N669Q and N1080Q exhibited increased fusogenic activity and induced syncytia formation in HEK293T cells. Therefore, N-glycans on the SARS-CoV and SARS-CoV-2 S2 subunits are of great importance in maintaining the prefusion state of the S protein. The study revealed the critical roles of N-glycans in S protein maturation and stability, which have implications for the design of vaccines and anti-viral strategies.

The establishment of an isolation layer in submarine mining has long presented an enduring challenge. In the context of this research, we conducted a similarity simulation test to preliminarily ascertain the interplay between the thickness and extent of the isolation layer. Subsequently, we introduce an innovative approach that integrates fractal theory and the bonded block model (BBM) to simulate undersea isolation layer mining. The validation of this method hinges on on-site borehole scanning and displacement monitoring, which serve to depict the intricate fractal evolution of fractures and predict the optimal thickness of the isolation layer. Our findings affirm the robustness and validity of this method. Evaluation of the fractal dimensions of fractures reveals that a critical threshold of 1.7 exists to prevent structural failure of the isolation layer, while a limit of 1.5 is necessary to avert significant water ingress. Remarkably, the correlation dimension of the settlement time series closely aligns with the fractal dimension of the fractures, underscoring the feasibility of ensuring the safety of isolation layer mining through real-time settlement monitoring.

Modern research into carcinogenesis has undergone three phases. Surgeons and pathologists started the first phase and established autopsy and biopsy as routine pathology services, in turn establishing morphological traits for tumors and establishing immortality and autonomy as indispensable criteria for neoplasms. A century ago medical doctors and biologists initiated “experimental cancer research” as the second phase, in which they, with help from chemists, established many chemical-induced animal models of carcinogenesis. In this phase, the two-hit theory and stepwise carcinogenesis of “initiation-promotion” or “initiation-promotion-progression” were established, with an illustrious finding that outgrowths induced in animals depend on the inducers, and thus are not authentically neoplastic, until late stages. For the last 40 years, molecular biologists have gradually dominated the carcinogenesis research fraternity and have established numerous genetically-modified animal models of carcinogenesis. However, evidence has not been provided for immortality and autonomy of the lesions from most of these models. Probably, many peers had already collected the lesions from animals for analyses of “cancer” mechanisms before the lesions became autonomous. We herein review monumental work of many predecessors to reinforce that evidence for immortality and autonomy is essential for confirming a neoplastic nature. We extrapolate that immortality and autonomy are established early during sporadic human carcinogenesis, unlike the late establishment in all animal models. It is imperative to resume many forerunners’ work by determining the genetic bases for initiation, promotion and progression, the genetic bases for immortality and autonomy, and which animal models are, in fact, good for identifying such genetic bases.

Gravel packing completion method for horizontal wells has the advantages of maintaining high oil production for a long time, maintaining wellbore stability and preventing sand production, so it has become the preferred completion method for horizontal wells. At present, this technology still faces the problems of high sand bed height and poor gravel migration. In order to improve the efficiency of gravel packing in horizontal wells, pulsed gravel packing technology for horizontal wells is proposed for the first time. Based on the mechanism of hydraulic pulse, the Eularian model, RNG K-ε model and CFD model are used to simulate the solid-liquid two-phase flow. By optimizing the parameters such as frequency and amplitude of pulse waveform, the optimal pulse waveform of pulsed gravel packing in horizontal wells is determined. The effects of parameters such as sand-carrying fluid displacement, sand-carrying fluid viscosity, sand-carrying ratio, gravel particle size and string eccentricity on pulsed gravel packing in horizontal wells are studied, and the distribution law of gravel migration velocity and volume fraction in horizontal wells is obtained. According to the results, it can be seen that with the increase of displacement and viscosity of carrier fluid, the volume fraction of fixed bed and moving bed decreases gradually, while that of suspension bed increases gradually. With the increase of sand-carrying ratio, gravel particle size and string eccentricity, the volume fraction of fixed bed and moving bed increases gradually, while that of suspended bed decreases gradually. Comparing the effects of conventional gravel packing and pulsed gravel packing in horizontal wells, it can be concluded that the efficiency of pulsed gravel packing in horizontal wells is higher. The volume fraction of fixed bed and moving bed decreased by 30% and 40% respectively, while the volume fraction of suspended bed increased by 20%. The migration velocity of moving bed and suspended bed increased by 40% and 25% respectively. And the migration ability of gravel improved obviously.

We evaluated the immunogenicity persistence of different immunization regimens of freeze-dried human rabies vaccine (Vero cells) in the 10–60 years age group of the Chinese population. Based on phase III clinical trials of Vero cells, participants who completed the full course of immunization were continuously enrolled in four-dose trial, five-dose, and five-dose control groups. Venous blood samples were collected 12 months after completion of the full immunization for rabies virus-neutralizing antibody (RVNA) testing, and the antibody-positive rate and geometric mean concentration (GMC) were calculated. Analysis of variance was used to compare three groups. The four-dose trial, five-dose trial, and five-dose control groups included 200, 186, and 214 participants, respectively. Twelve months after full immunization, the overall RVNA-positive rates were 97.00%, 93.55%, and 94.86% in the four-dose trial, five-dose control, and five-dose trial groups, respectively. The post-immunization RVNA GMCs values were 2.50, 2.05, and 2.04 IU/mL, respectively, with no statistically significant differences between them. Twelve months after full immunization, the overall RVNA-positive rate remained high, demonstrating satisfactory immunogenicity persistence for both immunization regimens.

Several specialized terpenoids that are used as phytoalexins are produced in the plant of tobacco. They play a key role in plant defense against pests and pathogens. Here, we performed genome-wide identification, classification, and expression profiling of the terpene synthase (TPS) genes in the tobacco genome. A total of 186 TPS genes were identified, which is significantly higher than that in wild Nicotiana, Capsicum and Solanum species. Phylogenetic analysis of these TPS genes in tobacco and Solanaceous relatives as well as Arabidopsis showed that a few tobacco-exclusive TPS clades occurred recently through gene duplication events. These clades are likely to be responsible for a range of compounds that separate N. tabacum cultivars from its wild relatives. Transcriptome sequencing of two cultivars of N. tabacum at several developmental stages revealed that some TPS genes from the TPS-a and TPS-b lineages are constitutively expressed and a few duplicated TPS genes are only expressed post anthesis at the time of harvest. Additionally, some TPS genes underwent alternative splicing, further diversifying the gene products of the TPS genes. Our findings provide an important candidate genes for further understanding of the diversity and evolution as well as functionality of TPS genes in the plant of tobacco.

There are many theories of carcinogenesis arguing against the orthodox mutation theory, debating on such as “epigenetic alteration” that is inheritable and yet, theoretically, reversible. Our integrated theory describes that any extracellular, intracellular, or intranuclear stressors, mutagenic or not, can initiate a lengthy tumorigenesis to engender a benign or malignant tumor, but the aberrations directly establishing cellular immortality and autonomy may be epigenetic or genetic alterations in the genomic DNA. A neoplasm is considered a semi-new organism with autonomy; it therefore should have genetic mutations to be “new”. We may be able to direct cancer cells towards differentiation as a remedy, because the extracellular milieu may control the phenotype of a cell and the tissue or organ made of the cell’s progenies, and the cytoplasm of a cell may override the nucleus in the phenotypic control. However, the nucleus retains the capacity to manifest itself if allowed by the microenvironment, which then allows the already reversed cells to revert back to tumor cells again. Neoplasms are malignant if they bear epigenetic or genetic anomalies in mutator genes defined as those whose alterations allow or accelerate alterations to occur in other genes, whereas neoplasms are benign if they bear epigenetic or genetic aberrations only in non-mutator genes. It is imperative to identify the immediate tumor-causing cellular alterations defined as those directly responsible for immortality and autonomy, and for treatment purposes to identify the extracellular and intracellular factors that control the phenotype of cancer cells.

Abstract: Female pelvic floor dysfunction (FPFD) is a series of conditions caused by the displacement or dysfunction of the patient's pelvic organs due to defects, injuries, and deterioration of the pelvic floor supportive structures, with stress urinary incontinence and pelvic organ prolapse being the most common. The mechanism of pelvic floor dysfunction is complex and not yet fully understood, and is often related to one or more functional abnormalities of muscles, connective tissues, fascia, nerves and blood vessels. Specialized clinicians are often unable to cover the comprehensive medical professional information of various specialties such as gynecology and obstetrics, urology, anus and intestines, imaging, etc., and the systematic and comprehensive diagnosis and treatment of the disease will be limited. The application of artificial intelligence concepts in the medical field not only improves the diagnostic efficiency of physicians, but also provides reference and basis for the development of comprehensive treatment programs. This article follows and draws on the diagnosis and treatment process of pelvic floor dysfunction recommended in various guidelines, incorporates physical therapy techniques into the conventional non-surgical treatment of pelvic floor dysfunction, provides guidance for the diagnosis and treatment of pelvic floor dysfunction, and briefly introduces the clinical application and value of pelvic floor intelligent diagnosis and treatment in pelvic floor dysfunction.

The objective of this study aimed to develop biodegradable calcium alginate microspheres carrying doxorubicin (Dox) at the micrometer-scale for sustained-release and the capacity of pH regulatory for transarterial chemoembolization. Ultrasonic atomization and CaCl2 cross-linking technologies were used to prepare the microspheres. A 4 by 5 experiment was first designed to identify imperative parameters. The concentration of CaCl2 and the flow rate of the pump were found to be critical to generate microspheres with a constant volume median diameter (~ 39 m) across 5 groups with different alginate:NaHCO3 ratios using each corresponding flow rate. In each group, the encapsulation efficiency was positively correlated to the Dox-loaded efficiency. Fourier-transform infrared spectroscopy showed that NaHCO3 and Dox were step-by-step incorporated into the calcium alginate microspheres successfully. Microspheres containing alginate:NaHCO3 = 1 exhibited rough and porous surfaces, high Young’s modulus and hardness. In each group with the same alginate:NaHCO3 ratio, the swelling rates of microspheres were higher in PBS containing 10% FBS compared to those in PBS alone. Microspheres with relative high NaHCO3 concentrations in PBS containing 10% FBS maintained better physiological pH and higher accumulated Dox release ratios. In two distinct hepatocellular carcinoma-derived cell lines, treatments with microspheres carrying Dox demonstrated that the cell viabilities decreased in groups with relative high NaHCO3 ratios in time- and dose-dependent manners. Our results suggested that biodegradable alginate microspheres containing relative high NaHCO3 concentrations improved the cytotoxicity effects in vitro.

Abstract: The calibrator is one of the most important factors in the calibration of various laser 3D scanning instruments. The requirements for diffuse reflection surface are specially emphasized in many national standards. In this study, the spherical calibrator and plane calibrator compara-tive measurement experiments were carried out. The black ceramic standard sphere, white ce-ramic standard sphere, metal standard sphere, metal standard plane and white ceramic standard plane were used to test the laser 3D scanner. In the spherical calibrators comparative measure-ment experiments, the results indicated that the RMS of the white ceramic spherical calibrator with reflectance about 60% is 10 times that of the metal spherical calibrator with the reflectance of about 15%, and the RMS of the black ceramic spherical calibrator with reflectance of about 11% is of the same order as the metal spherical calibrator. In the plane calibrators comparative measurement experiments, the RMS of flatness measurement is 0.077 mm for metal plane cali-brator with reflectance of 15%, and 2.915 mm for ceramic plane calibrator with reflectance of 60%. The results show that when the optimal measurement distance and incident angle are selected, the reflectance of the calibrator has a great effect on the measurement results, regardless of the outlines or profiles. Based on the experiments, it is recommended to use the spherical calibrator or the standard plane with reflectance of around 18% as the standard, which can obtain the rea-sonable results. In addition, it is necessary to clearly provide the material category and surface reflectance information of the standard when calibrating the scanner according to the measure-ment standard.

Ingestion of corrosive agents is a well-known cause of extensive and severe gastrointestinal tract injury. Acids can result in significant acute complications throughout the gastrointestinal system. Herein, we present a case of total gastrointestinal necrosis after a patient ingested a large amount of concentrated hydrochloric acid. Of note, the patient developed an intestinal fistula six days following ingestion, requiring surgical intervention. This case underscores the potential for delayed gastrointestinal necrosis with high-volume and concentrated hydrochloric acid ingestion. Early CT evaluationto and multi-organ protectionis are crucial for such patients. For patients with no signs of perforation, multidisciplinary physicians should comprehensively evaluate the necessity of surgical exploration. In such cases, comprehensive treatment strategies can significantly improve outcomes. The purpose of this case report is to highlight the complexities and challenges in managing severe hydrochloric acid ingestion, to discuss the multidisciplinary approach required for such cases, and to contribute to the existing literature by providing detailed insights into the clinical presentation, treatment, and outcomes of a rare and severe instance of concentrated HCl ingestion.

Excessive intake of fluoride, one of the trace elements to maintain health, leads to liver injury. Tetramethylpyrazine (TMP) is a kind of traditional Chinese medicine monomer with good antioxidant and hepatoprotective function. The aim of this study was to investigate the effect of TMP on liver injury induced by acute fluorosis. A total of 60 1-month-old male Institute of Cancer Research mice without carriage of pathogenic bacteria were selected. All mice were fed adaptively for one week, and then randomly divided into 5 groups: control (K) group, model (F) group, low-dose (LT) group, medium-dose (MT) group and high-dose (HT) group. The control and model group were given distilled water, while 40 mg/kg (LT), 80 mg/kg (MT) and 160 mg/kg (HT) TMP were fed by gavage for two weeks with the maximum gavage volume of mice is 0.2ml/10g/d. Except for the control group, all groups were given fluoride (35 mg/kg) by intraperitoneal injection on the last day of the experiment. The results of this study showed that compared with the model group, TMP alleviated the pathological changes of liver induced by fluoride and improved the ultrastructure of liver cells; TMP significantly decreased the levels of ALT, AST and MDA (P <0.05), and increased the levels of T-AOC, T-SOD and GSH (P <0.05). The results of mRNA detection showed that TMP significantly increased the mRNA expression levels of Nrf2, HO-1, CAT, GSH-Px and SOD in liver compared with model group (P <0.05). In conclusion, TMP can inhibit oxidative stress by activating Nrf2 pathway and alleviate liver injury induced by fluoride.

With advancements in digital technologies such as 5G communications, big data, and cloud computing, the components of network operation systems have become increasingly complex, significantly complicating system monitoring and maintenance. Correspondingly, automated log anomaly detection has become a crucial means to ensure stable network operation and protect them from malicious attacks or failures. Conventional machine learning and deep learning methods assume consistent distributions between the training and testing data, adhering to a closed-set recognition paradigm. Nevertheless, in realistic scenarios, systems may encounter new anomalies that were not present in the training data, especially in log anomaly detection. Inspired by evidential learning, we propose a novel anomaly detector called LogEDL, which supervises training of the model through an evidential loss function. Unlike traditional loss functions, the evidential loss function not only focuses on correct classification, but also quantifies the uncertainty of predictions. This enhances the robustness and accuracy of the model in handling anomaly detection tasks, while achieving functionality similar to open-set recognition. To evaluate the proposed LogEDL method, we conduct extensive experiments on three datasets, i.e., HDFS, BGL, and Thunderbird, to detect anomalous log sequences. Experimental results demonstrate that our proposed LogEDL achieves state-of-the-art performance in anomaly detection.

In order to understand the genetic diversity of germplasm resources of kumquat in Guangxi, 14 kumquat germplasm resources in Guangxi and 12 accessions from other provinces were analyzed by using SRAP markers. In total, 19 primer pairs with high stability, good reproducibility, and high polymorphism were chosen for analysis of all the 26 kumquat genotypes. Among the 101 amplified bands, 87 (86.14%) were polymorphic. SRAP markers were analyzed by employing Principal Coordinate Analysis, Population Structure Analysis and Hierarchical Cluster Analysis (UPGMA). The classification results showed that 26 kumquat germplasm could be divided into 5 groups, including cultivated kumquat, intergeneric hybrid, wild kumquat from other provinces, wild kumquat from Guangxi and hybrid kumquat from Guangxi. Guangxi kumquat germplasm occurred high genetic diversity, which were clearly divided into 3 groups like cultivated kumquat, wild kumquat and kumquat hybrid. And the 8 cultivated kumquat varieties in Guangxi were further divided into two subgroups. Wild kumquat in Guangxi and wild kumquat in other provinces belong to different groups, meanwhile the hybrids of Guangxi kumquat form independent groups, thus indicated that Guangxi wild kumquat and kumquat hybrid possessed certain specificity, or they maybe belonged to different species. Among the tested 26 kumquat accessions, 23 unique genotype-specific SRAP markers were detected for 14 kumquat genotypes, which made it possible to surely identify them. For the remaining 12 accessions without genotype-specific markers, they were distinguished by various combinations of markers. These results may have certain importance for kumquat genetic research and cultivar selection.

By combing continuum topology optimization (TO) method and lattice structure technique, a sandwich aircraft spoiler with a high stiffness-to-weight is designed. TO method is served to produce the shell of the aircraft spoiler and the lattice structure, used as cores, is employed to support the shell. TO problem is established as maximizing the stiffness of the structure with limited material volume. Density-based method is utilized to achieve a 0/1 solution. We then empirically replace the core of the aircraft spoiler by using 3D kagome lattice structure. Two different materials, i.e., aluminum alloy and titanium alloy, are synthetically applied to further reduce the weight and simultaneously improve the strength of the aircraft spoiler. Numerical simulations are conducted to show that the designed aircraft spoiler can meet the service environment with a reduction of its weight by approximately 80% when compared with that of the initial design model. Finally, we have fabricated the designed model with photosensitive resin by using 3D printing technique.

Development and deployment of wheat varieties with high yields, wide adaptability, good quality, multiple-resistance to abiotic and biotic stresses, and efficient response to fertilizers have greatly contributed to global wheat sustainable production. The genomic composition of key commercial wheat variety can help understand the genetic basis underlying the development of new variety and permit increased breeding efficiency. In this study, we report the chromosomal and genomic compositions of BN207, presently the leading wheat variety in the southern region of Huang-Huai River Valley, the most important wheat producing area in China through an integrated analysis using fluorescent in situ hybridization (FISH) and wheat 15 K SNP array. Our results showed that BN207 inherited 55.3% and 40.7% of its genome from its male parent BN64 and female parent ZM16, respectively, and generating 64 novel or recombined loci. Besides, we detected nine chromosomal variations in Bn207 and its parents and ten sister lines, and physically mapped two variations, the pericentric inversion of chromosome 6B, and large tandem repeat sequence block at the long arm of 5A, both had positive effects on agronomic traits, by integration of FISH and SNP loci recombination analyses. These results will provide a reference for breeding of high yield wheat varieties as BN207, and the application of founder parents BN64 and ZM16, which are being utilized frequently in wheat breeding programs in Henan Province and surrounding areas.

The Spiking Neural Network (SNN) has attracted more and more attention recently. It adopts binary spike signals to transmit information. Benefitting from the information passing paradigm of SNNs, the multiplications of activations and weights can be replaced by additions, which are more energy-efficient. However, its ``Hard Reset" mechanism for the firing activity would ignore the difference among membrane potentials when the membrane potential is above the firing threshold, causing information loss. Meanwhile, quantifying the membrane potential to 0/1 spikes at the firing instants will inevitably introduce the quantization error thus bringing about information loss too. To address these problems, we propose to use the ``Soft Reset" mechanism for the supervised training-based SNNs, which will drive the membrane potential to a dynamic reset potential according to its magnitude, and Membrane Potential Rectifier (MPR) to reduce the quantization error via redistributing the membrane potential to a range close to the spikes. Results show that the SNNs with the ``Soft Reset" mechanism and MPR outperform their vanilla counterparts on both static and dynamic datasets.

Freshwater lakes represent a potential source of methane (CH4) to the atmosphere. However, the CH4 emission contribution to the total emission in the littoral zones of lakes, especially emergent macrophytes (e.g., lotus), are poorly known. Lotus, has been cultivated in almost all provinces in China, is not only an aquatic plant but also a kind of vegetables. Two sampling zones (lotus plant and open water) were established in the lake of the middle reaches of Yangtze River. The CH4 emission was measured using a floating opaque chamber and gas chromatography between April to December of the years 2021 and 2022. The results indicated that the flux of CH4 emissions ranged from 0.10 to 59.75 mg m-2 h-1, with an average value of 5.61 mg m-2 h-1 in the open water, while ranged from 0.19 to 57.32 mg m-2 h-1, with an average value of 17.14 mg m-2 h-1 in the lotus plant zone. The maximal CH4 emissions occurred in July and August for the open water, which was highly related to the air and water temperature; whereas it happened in September for the lotus plant zone, due to the fresh organic matter inputting to sediments, CH4 transportation by lotus plant, high soil organic carbon content, and the lower dissolved oxygen concentration. Considering the carbon emissions (both CH4 and CO2) and plant productivity, although the greater CH4 emission occurring in lotus plant zone, it could still represent a potential carbon sink (213 g m-2 yr-1), compared to the open water.

This review investigates the multifaceted role of the p66Shc adaptor protein and the gut microbiota in regulating mitochondrial function and oxidative stress, and their collective impact on the pathogenesis of chronic diseases. The study delves into molecular mechanisms by which p66Shc influences cellular stress responses through Rac1 activation, Forkhead-type transcription factors inactivation, and mitochondria-mediated apoptosis, alongside modulatory effects of gut microbiota-derived metabolites and endotoxins. Employing an integrative approach, the review synthesizes findings from a broad array of studies, including molecular biology techniques and analyses of microbial metabolites' impacts on host cellular pathways. The results underscore a complex interplay between microbial metabolites, p66Shc activation, and mitochondrial dysfunction, highlighting the significance of the gut microbiome in influencing disease outcomes through oxidative stress pathways. Conclusively, the review posits that targeting the gut microbiota-p66Shc-mitochondrial axis could offer novel therapeutic strategies for mitigating the development and progression of metabolic diseases. This underscores the potential of dietary interventions and microbiota modulation in managing oxidative stress and inflammation, pivotal factors in chronic disease etiology.

Nowadays, Multi-needle electrospinning has used to be an efficient method for producing nanofiber membranes. But in the process, the fluctuation errors in electrospinning fluid flow rate have directly influence the membrane quality, which bringing instability and still have not been solved yet. For finding out the solution to the inaccurate flow control in multi-needle, it is necessary to develop a multi-stage flow runner spinneret for large-scale production of nanofiber membrane. At first, the paper uses the finite element software COMSOL to numerically simulate the polymer flow in the runner of spinneret. Based on it, the velocity field distribution curve was draw and the velocity instability coefficient of the polymer flow was attained, which are providing theoretical guidance for the optimal design of spinneret. Next, the response surface analysis method (RSM) was used to establish a regression model between the average diameter of the nanofiber membrane and the process parameters. Then, above regression model used to perform variance data processing between the average diameter and the process parameter configuration. After that, the 2D and 3D response surface profiles and the significance analysis were completed. Finally, the stability of the nanofibers production was improved, which attained the optimal adjustment of process configuration in multi-needle electrospinning.

Skeletal muscle is a specialized tissue consisting of nondividing and multinucleated muscle fibers. Skeletal muscle-specific myostatin (MSTN) is a secreted protein that acts as a negative regulator of muscle mass by inhibiting proliferation and differentiation of myoblasts. In this study, we established a screening platform to monitor myostatin promoter activity in rat L8 myoblasts. Extract of Glycyrrhiza uralensis (GUE), an oriental herbal medicine, was identified through this screening platform and, the active fractions of GUE were identified by process-scale liquid column chromatography system. For in vivo study, the GUE as a feed additive was investigated in growth-finishing pigs. The results showed that GUE significantly increased body weight, carcass weight and lean content in pigs. Microbiota analysis indicated that GUE did not affect the composition of gut microbiota in pigs. In summary, this established rodent myoblast screening platform was used to identify a myogenesis-related phytogenic, GUE, and further demonstrated that the active fractions inhibited MSTN expression. These finding suggest a novel application for GUE in growth performance enhancement through modulation of MSTN expression. Furthermore, this established screening platform has great potential for identification and evaluation of a wide variety of phytogenics involving in myogenesis.

A novel determination method using flow-through cartridge purification and ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (UPLC-MS/MS) was developed for the identification and quantification of 30 mycotoxins (aflatoxin B1, B2, G1, G2, sterigmatocysin, T-2 toxin, diacetoxyscirpenol, roquefortine C, methylergonovine, ergocornine, lysergol, enniatin A, enniatin A1, enniatin B, enniatin B1, beauvericin, deoxynivalenol, 3-acetylDeoxynivalenol, 15-acetylDeoxynivalenol, patulin, verruculogen, neosolaniol, gliotoxin, HT-2 toxin, wortmannin, zearalenone, α-zearalenol, β-zearalenol, α-zearalanol, and β-zearalanol) in feedstuffs. Mycotoxins were extracted from sample by 0.1% formic acid aqueous solution/acetonitrile (16/84 v/v), then purified by a Cleanert® MC clean-up column. As a result, the pigments and other matrices were efficient removed from the sample extract solution. The purified eluate was collected, then evaporated and redissolved by 0.1% formic acid aqueous solution/acetonitrile (70:30 v/v) for UPLC-MS/MS detection. A BEH Shield RP18 chromatographic column was employed for separation of 30 mycotoxins in a total of 14 min. Multiple-reaction monitoring (MRM) mode was applied for qualitative and quantitative analysis, and matrix calibration curves obtained with the external-standard method was used for quantitation of target analytes. Under optimized conditions, the linearity range was from 2 to 1000 ng/g, and the limit of quantification of the developed method was from 2 to 50 ng/g. The recoveries of 30 mycotoxins spiked in urine samples were from 72.0% to 118.5%, and the relative standard deviation was below 20%. The method was also well approved by certified reference sample, and applied on the real feedstuff samples testing successfully.

Here, we found higher percentage of CD8+ T cells in piglets immunized with CVC1302-adjuvanted inactivated FMDV vaccine. We wonder whether promoted cellular immunity induced by CVC1302-adjuvanted inactivated FMDV vaccine due to the promoted antigen cross-presentation efficiency of OVA by DC mainly via the cytosolic pathways, demonstrated by enhanced levels of lysosomal escape of OVA in DC, loaded with OVA and CVC1302. Higher levels of ROS and significant enhanced elevated lysosomal pH in DC facilitated the lysosomal escape of OVA. Significant enhanced CTL activities were observed in mice immunized with OVA-CVC1302. Overall, CVC1302 increased the cross-presentation of exogenous antigens and the cross-priming of CD8+ T cells by alkalizing the lysosomal pH and facilitating the lysosomal escape of antigen. These studies shed new light on the development of immunopotentiators to improve the cellular immunity induced by vaccine.

Mango industry played important roles in the economy of tropical and subtropical regions in China. Embryo abortion, flesh rotten, pericarp stain and so on always result in heavy loss. Transgenic breeding is a potential way for solving these problems. However, dependable protocol for mango transgene has not been reported until now. In this research, we found that after mango embryogenic callus were infected by Agrobacterium, most callus necrotized and died. No seedling was differentiated from the survived callus. Contents of 106 compounds in mango callus infected by Agrobacterium were found significantly different from those in control. The top 7 up-regulated compounds were gallic acid, phosphoenolpyruvic acid, dihydrotricetin, ubiquinone, dihydrokaempferol, D-erythrose-4-phosphate and cyanidin. The expressions of ROS-related genes, gallic acid synthesis genes, and defense related genes in callus infected by Agrobacterium were significantly higher than those in control. The growth of Agrobacterium on culturing plate pipetting gallic acid was inhibited. Mango callus infected by Agrobacterium transformed with type III secretion system gene cluster (T3SS) and effector gene AvrPto isolated from Pseudomonas syringae pv. tomato strain DC3000 brown and necrotize slower than those infected by Agrobacterium transformed with net vector (NV). The contents of ROS in callus in-fected by Agrobacterium (T3SS-AvrPto) were less than those in callus infected by Agrobacterium (NV). The expressions of genes participated in immune responses in mango callus infected by Agrobacterium (T3SS-AvrPto) were also less than those in mango callus infected by Agrobacterium (NV). The transformation rate of mango callus infected with Agrobacterium (T3SS-AvrPto-gfp) was 1.6 %. No callus infected with Agrobacterium (NV-gfp) was transformed successfully. The efficiency of mango transformation can be improved by constructing Agrobacterium strains harboring type III secretion system gene cluster and its effector gene.

The botanical species Ceratonia siliqua L., commonly referred to as the Carob tree, and locally as “L’Kharrûb”, holds significance as an agro-sylvo-pastoral species, and is traditionally utilized in Morocco for treating a variety of ailments. This current investigation aims to ascertain the antioxidant, antimicrobial, and cytotoxic properties of the ethanolic extract of C. siliqua leaves (CSEE). Initially, we analyzed the chemical composition of CSEE through high-performance liquid chromatography with Diode-Array Detection (HPLC-DAD). Subsequently, we conducted various assessments, including DPPH scavenging capacity, β-carotene bleaching assay, ABTS scavenging, and total antioxidant capacity assays, to evaluate the antioxidant activity of the extract. In this study, we investigated the antimicrobial properties of CSEE against five bacterial strains (two gram-positive, Staphylococcus aureus, and Enterococcus faecalis; and three gram-negative bacteria, Escherichia coli, Escherichia vekanda, and Pseudomonas aeruginosa) and two fungi (Candida albicans, and Geotrichum candidum). Additionally, we evaluated the cytotoxicity of CSEE on three human breast cancer cell lines (MCF-7, MDA-MB-231, and MDA-MB-436) and assessed the potential genotoxicity of the extract using the comet assay. Through HPLC-DAD analysis, we determined that phenolic acids and flavonoids were the primary constituents of the CSEE extract. The results of the DPPH test indicated a potent scavenging capacity of the extract with an IC50 of 302.78 ± 7.55 µg/mL, which was comparable to that of ascorbic acid with an IC50 of 260.24 ± 6.45 µg/mL. Similarly, the β-carotene test demonstrated an IC50 of 352.06 ± 12.16 µg/mL, signifying the extract's potential to inhibit oxidative damage. The ABTS assay revealed IC50 values of 48.13 ± 3.66 TE µmol/mL, indicating a strong ability of CSEE to scavenge ABTS radicals, and the TAC assay demonstrated an IC50 value of 165 ± 7.66 µg AAE/mg. The results suggest that the CSEE extract had potent antioxidant activity. Regarding its antimicrobial activity, the CSEE extract was effective against all five tested bacterial strains, indicating its broad-spectrum antibacterial properties. However, it only showed moderate activity against the two tested fungal strains, suggesting it may not be as effective against fungi. The CSEE exhibited a noteworthy dose-dependent inhibitory activity against all the tested tumor cell lines in vitro. The extract did not induce DNA damage at the concentrations of 6.25, 12.5, 25, and 50 µg/ml, as assessed by the comet assay. However, the 100 µg/ml concentration of CSEE resulted in a significant genotoxic effect compared to the negative control. A computational analysis was conducted to determine the physicochemical and pharmacokinetic characteristics of the constituent molecules present in the extract. The Prediction of Activity Spectra of Substances (PASS) test was employed to forecast the potential biological activities of these molecules. Additionally, the toxicity of the molecules was evaluated using the Protox II webserver.

Owing to the rising demand for vegetable soybean products, there is an increasing need for high-yield soybean varieties to raise the output. However, complex correlation patterns among quantitative traits with genetic interactions bring a challenge for vegetable soybean breeding. Here, a genome-wide association study (GWAS) was applied for six yield-related traits with 188 vegetable soybean accessions. A total of 81 SNPs were identified for pod length, plant height, pods number, pod thickness, pod width, and seed weight per plant by Blink model. Among these significant SNPs, 79 were novel SNPs, while 2 overlapped with previously reported SNPs. A total of 220 genes were found in 100 kb upstream and downstream regions of significant SNPs, of which 17 genes were functional proteins. Among these function proteins, four candidate genes, Glyma.13G109100, Glyma.03G183200, Glyma.09G102200, and Glyma.09G102300 were analyzed as significant haplotype variations, which encode MYB-related transcription factor, auxin-responsive family protein, F-box protein and CYP450, respectively. In addition, the relative expression with four candidate genes in the V030 and V071 (Among them, the plant height, pod number and fresh pod weight of V030 were lower than V071 strains) vegetable soybean were significantly different and these genes could be involved in plant growth and development via various pathways. Therefore, we proposed four genes from vegetable soybean germplasm that could be the key candidate genes for pod yield and plant height and these studies will accelerate the process of high-yield vegetable soybean breeding.

Microglia-related retinal inflammation is associated with a variety of retinal diseases. Lycium barbarum Glycopeptide (LBGP) is the main active component of Lycium barbarum polysaccharide (LBP) isolated from Lycium barbarum, which possesses antioxidation, neuroprotection, and immunoregulation. However, whether LBGP has beneficial effects on LPS/IFN-γ (L/I) induced retinal microglial activation and its underlying mechanism remains to be elucidated. In this study, we observed the anti-inflammatory properties of LBGP in microglia activated by LPS and IFN-γ (L/I), examining both primary retinal microglia and BV2 microglial cells. Cells were pretreated with LBGP for 2h before stimulated with LPS/IFN-γ (L/I) for 24h. The dosages of LBGP for cells were evaluated by using the CCK-8 assay. The morphological changes were observed using an optical microscope. The changes in expression of cytokines and inflammatory mediators were measured with Griess assay, ELISA, qPCR, and immunofluorescence. Western blotting was used to assess MAPK, NF-κB signal transducer. LBGP pre-treatment significantly reversed L/I-induced microglia morphological alterations in area, perimeter, Feret's diameter, and roundness. LBGP significantly alleviated the L/I-induced microglial activation in primary and BV2 microglial cells. LBGP switched the M1 pro-inflammatory phenotype to the M2 anti-inflammatory phenotype by downregulating the expression of M1 markers (iNOS, IL-1β, IL-6, COX2, CD16, and CD86) and upregulating the expression of M2 markers (arginase 1 and CD206). Furthermore, LBGP attenuated the activation of NF-κB and MAPK pathways in L/I-activated BV2 cells. In summary, it is suggested that LBGP pretreatment significantly alleviated L/I-induced retinal inflammation by regulating microglial(M1/M2) polarization via NF-κB and MAPK signaling pathways.

Named Entity Recognition (NER) is a fundamental and pivotal stage in the development of various knowledge-based support systems, including knowledge retrieval and question-answering systems. In the domain of pig diseases, Chinese NER models encounter several challenges such as the scarcity of annotated data, domain-specific vocabulary, diverse entity categories, and ambiguous entity boundaries. To address these challenges, we propose PDCNER, a Pig Disease Chinese Named Entity Recognition method leveraging lexicon-enhanced BERT and contrastive learning. Firstly, we construct a domain-specific lexicon and pre-train word embeddings in the pig disease domain. Secondly, we integrate lexicon information of pig diseases into the lower layers of BERT using a Lexicon Adapter layer, which employs char-word pair sequences. Thirdly, to enhance feature representation, we propose a lexicon-enhanced contrastive loss layer on top of BERT. Finally, a Conditional Random Field (CRF) layer is employed as the model's decoder. Experimental results show that our proposed model demonstrates superior performance over several mainstream models, achieving a precision of 87.76%, a recall of 86.97%, and an F1-score of 87.36%. The proposed model outperforms BERT-BiLSTM-CRF and LEBERT by 14.05% and 6.8%, respectively, with only 10% of the samples available, showcasing its robustness in data scarcity scenarios. Furthermore, the model exhibits generalizability across publicly available datasets. Our work provides reliable technical support for the information extraction of pig diseases in Chinese and can be easily extended to other domains, thereby facilitating seamless adaptation for named entity identification across diverse contexts. The codes have been open-sourced at https://github.com/tufeifei923/pdcner.

Named Entity Recognition (NER) serves as a fundamental and pivotal stage in the development of various knowledge-based support systems, including knowledge retrieval and question answering systems. In the domain of pig diseases, Chinese NER models encounter several challenges such as the scarcity of annotated data, domain-specific vocabulary, diverse entity categories, and ambiguous entity boundaries.To address these challenges, a corpus, labeled datasets and a lexicon specific to pig diseases for Chinese named entity recognition were constructed. Subsequently, a Pig Disease Chinese Named Entity Recognition (PDCNER) model was proposed. The model integrates external lexicon knowledge of pig disease by employing Lexicon-enhanced BERT and enhance feature representation by incorporating contrastive learning. Experimental results show that the model achieved the best recognition results, with a precision of 86.92%, a recall of 85.08%, and an F1-score of 85.99% respectively. Furthermore, the model exhibits robustness and generalizability across few-shot and publicly available datasets. Experimental results illustrate the proposed model could effectively identify Chinese named entities of pig diseases, outperforming several existing baseline methods. Moreover, the proposed model can be extended to other animal disease domains, such as chicken and cattle, thereby facilitating seamless adaptation for named entity identification across diverse contexts.

Background: Early diagnosis of postoperative complications is an urgent task, allowing timely prescribing of appropriate therapy and reducing the cost of patient treatment. Prognostic models based on various data could help in the early diagnosis of postoperative complications after cardiac surgery. Objectives: The purpose of the study was to determine whether an integrated approach based on clinical data along with metabolites and biomarkers had greater predictive value than the models built on less data. Methods: The study included patients (n=62) admitted for planned cardiac surgery (coronary artery bypass grafting with cardiopulmonary bypass), who were retrospectively divided into two groups depending on the presence (n=26) or absence (n=36) of postoperative complications of all types. Clinical and laboratory data on the first day after surgery were analyzed. Additionally, patients' blood samples were collected before and on the first day after surgery to determine biomarkers (interleukin-6, procalcitonin, NT-proBNP, high-sensitivity troponin T) and metabolites (8 aromatic and 2 dicarboxylic acids were detected using gas chromatography-mass spectrometry). Results: Patients before surgery, compared with healthy donors, differed in the concentration of metabolites (p &lt; 0.05), and had concentrations of a number of biomarkers exceeding the corresponding reference values. Multivariate PLS-DA models, predicting the presence or absence of postoperative complications, were built using clinical data (ROC-AUC=0.71), concentrations of metabolites and biomarkers (ROC-AUC=0.60), and the entire data set (ROC-AUC=0.75). For comparison we built univariate models using the EuroScore2 (ROC-AUC=0.59) and SOFA (ROC-AUC=0.76) scales; concentrations of lactate (ROC-AUC=0.71), the dynamic changes of 4-hydroxyphenyllactic acid (ROC-AUC=0.69), and the sum of three sepsis-associated metabolites (ROC-AUC=0.70). The proposed complex model using entire data set was comparable to the SOFA scale, which confirms the expediency of searching for new predictive models based on a variety of factors.

Milk serves as a crucial source of natural bioactive compounds essential for human nutrition and health. The gastrointestinal digestion of milk proteins releases various biologically active peptides that positively impact human health and enhance physiological performance. With the growing production of cheese, Greek yogurt, and other dairy products, the volume of unutilized acid whey is significantly increasing. Acid whey, containing almost all whey proteins and approximately one-quarter of casein, presents a valuable raw material for generating peptides with potential health benefits. These peptides exhibit properties such as antioxidant, antimicrobial, anti-inflammatory, anticarcinogenic, antihypertensive, antithrombotic, opioid, mineral-binding, and growth-stimulating activities, contributing to improved human immunity and the treatment of chronic diseases. Enzymatic hydrolysis of milk proteins has been developed as a method to produce these peptides, facilitating their use in food fortification. To incorporate whey into functional beverages, it undergoes fermentation by lactic acid bacteria with proteolytic activity. To specifically enrich these beverages with peptides exhibiting targeted bioactivities, it is essential to select lactic acid bacteria strains possessing the requisite protease profiles. Additionally, the sensory properties of the final product can be enhanced using starter cultures with diverse metabolic capabilities, even in the absence of added flavoring agents. Given the imperative to develop waste-free technologies and enhance the profitability of the dairy industry, there is a growing need to efficiently utilize and transform acid whey into a broad spectrum of valuable products and food additives. This approach is justified not only by the nutritional benefits of the bioactive components in whey but also by the commercial potential of safe and health-enhancing products.