This study examines the combined influence of both meteorological and non-climatic factors on rice production in Bangladesh between 1990 and 2020, using the Autoregressive Distributed Lag (ARDL) model. The key variables consist of temperature, precipitation, urbanisation, fertiliser management (specifically potassium levels), and the area of permanent crops. The findings highlight the substantial detrimental impact of temperature on rice output over a prolonged period, whereas precipitation and urbanisation have a favourable affect on rice productivity. However, the utilisation of potassium fertiliser has a detrimental effect on crop productivity. Furthermore, it has been demonstrated that the development of permanent crop fields has a beneficial effect on rice output. These findings provide important information for policymakers and agricultural stakeholders, highlighting the need for adaptive strategies to improve the ability of rice production to withstand the impacts of climate change and urbanisation. The significance of these discoveries applies to rice-producing regions worldwide, offering a strategic blueprint for sustainable cultivation of rice and ensuring food security.

This study examines the impact of natural resource exploitation, renewable energy consumption, economic growth, biocapacity, and information and communication technologies (ICT) on the ecological footprint of BRICS+ nations using panel data from 1991 to 2019. Advanced econometric techniques, including FMOLS, DOLS, CCR, and GMM, reveal significant findings relevant to sustainability-focused policymakers. The results show that natural resource exploitation significantly contributes to environmental degradation, while renewable energy consumption mitigates these effects to varying degrees across the studied countries. Although economic growth is crucial, it worsens ecological footprints unless accompanied by sustainable practices. ICT and biocapacity emerge as key factors in promoting environmental sustainability, with ICT enhancing innovation and efficiency to reduce ecological impacts. The study emphasizes the need for tailored policy frameworks that align economic growth with environmental sustainability, advocating for the adoption of renewable energy, eco-innovations, and green finance initiatives suited to the unique conditions of BRICS+ nations. The findings aim to guide policymakers in advancing sustainable development and mitigating the adverse environmental impacts of rapid industrialization and urbanization, while contributing to the global discourse on achieving a balance between economic growth and ecological well-being in developing countries.

In the past few decades, the transmission of data over an unsecure channel resulted in an increased rate of hacking. Therefore, the requirement to make multimedia data more secure is increasing day by day. Numerous algorithms are developed to improve efficiency and robustness. In this article, a novel and secure image encryption algorithm is presented. It is based on a modified chaotic logistic map (CLM) that provides the advantage of having less computational time to encrypt an input image. The encryption algorithm is based on Shannon’s idea of using substitution-permutation and one-time-pad network to achieve ideal secrecy. The CLM is used for substitution and permutation to improve randomness and increase dependency on the encryption key. Various statistical tests are conducted, such as Key Space Analysis, Complexity Analysis, Sensitivity Analysis, Strict Avalanche Criteria (SAC), Histogram Analysis, Entropy Analysis, Mean of Absolute Deviation (MAD) Analysis, Correlation Analysis, Contrast Analysis, and Homogeneity to give a comparative analysis of the proposed algorithm and verify its security. As a result of various statistical tests, it is evident that the proposed algorithm is more efficient and robust as compared to previous ones.

During December 2019, a novel coronavirus named as 2019-nCoV, has emerged in Wuhan, China. The human to human transmission of this virus has also been established. Untill now the virus has infected more than seven thousand people and has spread to fifteen countries. The World Health Organization (WHO) has declared 2019-nCoV as global health emergency due to its outburst well beyond China. There is need to develop some vaccines or therapeutics to control or prevent 2019-nCoV infections. The bottleneck with current conventional approaches is that these require longer time for vaccine development. However, computer assisted approaches help us to produce effective vaccine in short time compared with conventional methods. In this study, bioinformatics analysis was used to predict B cell and T cell epitopes of surface glycoprotein of 2019-nCoV that could be suitable to trigger significant immune response. The sequence of surface glycoprotein was collected from the database and analyzed to identify the immunogenic epitope. Both B cell and T cell epitopes were analyzed so the predicted epitopes can stimulate both cellular and humoral immune responses. We predicted 13 B cell and 05 T cell epitopes that later on were joined with GPGPG linker to make a single peptide. This computational approach to design a multi epitope peptide vaccine against emerging 2019-nCoV allows us to find novel immunogenic epitopes against the antigen targets of surface 2019-nCoV surface glycoprotein. This multi epitope peptide vaccine may prove effective to combat 2019-nCoV infections.

This study assesses the impact of militarization, industrialization, technological innovation, and energy consumption on CO2 emissions in NATO countries, divided into "traditional" (Group 1) and "new member" states (Group 2), using data from 1985 to 2019. It identifies heterogeneity in effects and dependencies between the groups. Employing Pedroni and Kao panel cointegration tests, a long-term equilibrium relationship among the variables is confirmed. The analysis, using panel ARDL and GMM methods, reveals distinct outcomes for each group. In Group 1, military spending and energy consumption significantly increase CO2 emissions, while industrialization and technological innovation reduce them. Conversely, in Group 2, technological innovation and energy consumption raise emissions, whereas military spending and industrialization decrease them. The findings suggest Group 1 should strategize military expenditure and energy consumption to cut emissions, whereas Group 2 should focus on eco-friendly technology and efficient energy use to achieve environmental sustainability.

The microgrid is a small-scale, autonomous decentralized power plant with its own distributed generation, storage capacity and multiple loads, with the capacity to function in grid interconnected and an island mode. The decentralized control of microgrids with parallel operated voltage source converters (VSCs) is proposed in this paper to improve power quality using a machine learning approach. The DNN based MPPT controller is proposed and its best performance is presented. The SRF-PLL is utilized for AC side synchronization in VSC control. The proposed microgrid involves two PV arrays fed to two voltage source converters along with their independent controls, connected in parallel through LC filters and line coupling transformers and serves the loads at PCC. The proposed model is simulated using MATLAB/Simulink. The dq-framed inner loop control is employed to individually regulate the real and reactive power at the point of common coupling. Furthermore, the proposed model is analyzed and compared by employing a mathematical model of AC system dynamics, inner loop control, output voltage quality, AC harmonic spectrum analysis, and total harmonic distortion (THD) in both grid interconnected and island mode. In island mode, AC harmonic spectrum and THD are accomplished within the permissible range.

Smart electronic devices and telemedicine are widely used in humans' daily lives. This provides remote treatment of patients using information and communications technology. New telemedicine technologies, such as the Internet of Medical Things (IoMT), make it easier for medical and computing devices to communicate regularly and effectively. Critical motivations for adapting the IoMT are reduced cost, increased quality of life, and timely medical intervention. IoMT is significant because it enables continuous, real-time patient monitoring during routine everyday activities using a variety of wearables and sensors. With big data, the IoMT technology makes excellent use of Artificial Intelligence (AI) to support disease detection and health condition prediction, alerting patients and healthcare providers. Many research studies have been conducted to explore various aspects of IoMT and its applications in the real world. However, it is challenging to comprehend all the techniques and solutions proposed by the research community. Therefore, this survey sheds light on some crucial aspects of IoMT technologies and explores the potential research gaps and directions the research community could tackle. The survey examines and discusses the characteristics of IoMT standards, protocols, and types. It then delves into the layers of IoMT and distinguishes them into Fog and edge. The studies published under each type were explored, and the limitations of these works were highlighted. The research gaps and directions on IoMT approaches and technologies were also highlighted. With such findings and research directions, further research endeavors could be carried out to address the issues and existing limitations in the IoMT.

In view of intensified disasters and fatalities caused by natural phenomena and geographical expansion, there is a pressing need for a more effective environment logging for a better management and urban planning. This paper proposes a novel utility computing model (UCM) for structural health monitoring (SHM) that would enable dynamic planning of monitoring systems in an efficient and cost-effective manner. The proposed UCM consists of network-attached data drive that stores data from SHM logger, population count system and Geographic Information System (GIS) enhanced with a Cloud IoT data backup, display, and analysis server. The UCM using this data and data from building information systems applies a simple machine learning algorithm to generate real-time structure health and suggests re-planning of SHM units. The health of structure varies dynamically with disturbances created by higher occupancy and structure density per zone. The proposed SHM-UCM is unique in terms of its capability to manage heterogeneous SHM resources. This was tested in a case study on Qatar University (QU) in Doha Qatar, where it looked at where SHM nodes are distributed along with occupancy density in each building. This information was taken from QU simulated occupation and zone calculation models and then compared to ideal SHM system data. Results show the effectiveness of the proposed model in logging and dynamically planning SHM.

Extreme overvalued beliefs (EOB) are rigidly-held, shared beliefs that are the motive behind most acts of terrorism and mass shootings. EOBs are differentiated from delusions and obsessions. The concept of overvalued idea was first described by Wernicke and later applied to terrorism by McHugh. Our group of forensic psychiatrists (Rahman, Resnick, Harry) refined the definition as an aid in the differential diagnosis seen in acts of violence. The form and content of EOBs is discussed as well as group effects, conformity and obedience to authority. Religious cults such as: The People’s Temple, Heaven’s Gate, Aum Shinrikyo, Islamic State (ISIS) and conspiracy beliefs such as assassinations, moon-hoax and vaccine-induced autism beliefs are discussed using this construct. Finally, some concluding thoughts on countering violent extremism, including its online presence is discussed utilizing information learned from online eating disorder and consumer experience.

Oral and parenteral delivery of first-line anticonvulsant Valproic cid (VA) are associated with serious adverse effects, high hepatic metabolism, high clearance, and low bioavailability in brain. GastroPlus program was used to predict in vivo performance of immediate (IR) and sustained release (SR) products in human. HSPiP software predicted excipients with maximum possible miscibility of the drug. Based on GastroPlus and HSPiP program, various excipients were screened for experimental solubility study and prepared cationic nanoemulsions and respective gels for nasal to brain delivery. These were characterised for size, size distribution, polydispersity index, zeta potential, morphology, pH, % transmittance, drug content, and viscosity. In vitro drug release, ex vivo permeation profile (goat nasal mucosa), and penetration studies were conducted. Result showed that in-vivo oral drug dissolution and absorption were predicted as 98.6 mg and 18.8 mg, respectively from both tablets (IR and SR) at 8 h using GastroPlus. The drug access to the portal vein was relatively predicted high in IR (115 mg) as compared to SR (82.6 mg). Plasma drug concentration-time profile predicted was in good agreement with published reports. The program predicted duodenum and jejunum as the prime site of drug absorption and no effect of nanonization on Tmax for sustained release formulation. Hansen parameters suggested suitable selection of excipients. The program recommended for nasal to brain delivery of the drug using cationic mucoadhesive product. The optimized stable CVE6 was associated with optimal size (113 nm), low PDI (0.26), high zeta potential (+34.7 mV), high transmittance (97.8%), and high strength (0.7 %w/w). In vitro release and ex vivo permeation of CVE6 were found to be substantially high as compared to anionic AVE6 and respective gels. Penetration study executed high fluorescence intensity with CVE6 and CVE6-gel as compared to suspension and ANE6 which may be attributed to electrostatic interaction between mucosal membrane and nanoglobules. Thus, cationic nanoemulsion and respective mucoadhesive gel are promising strategy for delivery of VA to brain through intransal administration for the treatment of seizure and convulsion.

In this paper, we examine the weak deflection angle and greybody factor of magnetized regular black hole. We implement the Gauss-Bonnet theorem on magnetized regular black hole to get the deflection angle. Moreover, we analyze the influence of plasma and non-plasma mediums on deflection angle of magnetized regular black hole. We observe the graphical behaviour of plasma and non-plasma mediums on deflection angle of magnetized regular black hole. Lastly, we study the rigorous bound phenomenon of the greybody factor of magnetized regular black hole. For this purpose we calculate greybody factor results and analyze the graphical behaviour of greybody bound for the different values of the parameters.

This article investigates the features of heat and mass transfer for the steady two-dimensional Williamson nanofluid flow across an exponentially stretched surface depending on suction/injection. The boundary conditions incorporate the impacts of the Brownian motion and thermophoresis boundary. The analysis of heat transfer is carried out for the two cases of prescribed exponential order surface temperature (PEST) and prescribed exponential order heat flux (PEHF). The ongoing flow problem is mathematically modeled under the basic laws of motion and heat transfer. The similarity variables are allowed to transmute the governing equations of the problem into a similarity ordinary differential equation (ODEs). The solution of this reduced non-linear system of ODEs is supported by the Homotopy analysis method (HAM). The combination of HAM arrangements is acquired by plotting the h-curve. In order to evaluate the influence of several emergent parameters, the outcomes are presented numerically and are plotted diagrammatically as a consequence of velocity, temperature and concentration proles.

In the field of agricultural food production, the transition between organic and inorganic farming methods has been an issue of much debate. The debate, on one hand, stresses the urgency for the transition in order to preserve environment and health; and, on the other hand, emphasizes the pressure of maintaining food production for a large growing population. Thus, the dilemma is how to find an agricultural system that would balance between obtaining food security and ensuring a safe sustainably environment-friendly food production system. This article focuses on the debate, in the context of Bangladesh, and questions whether it is the proper time, and stage in the development process, to attempt the transition from inorganic conventional food production methods to organic food production methods. This article contemplates why the organic rice market is not expanding in Bangladesh, and attempts to explain the slow growth of the market through the two main factors of income constraint and lack of awareness among people about the environmental and health detriments of inorganic farming methods. The study is exploratory in nature, and finds that it is not mainly the lack of awareness but the income constraint that can be principally attributed to the slow expansion of the organic rice market in Bangladesh. Through exploring consumers’ awareness about organic farming methods and their demand for organic products, this study shows how income as the major constraint, besides price, affects consumers demand for organic and inorganic rice in Bangladesh. Income being identified as the major barrier reveals the potential of the organic rice market to grow in the future, as Bangladesh continues its journey towards becoming a middle-income country.

Zinc nanoparticles (ZnNPs) open new opportunities for biomedical applications as a strategy against microbes and dye removal in an efficient way. The composite ZnNPs using Rhododendron arboreum (R. arboreum) stem bark were synthesized and characterized for UV-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The synthesized nanoparticles showed zones of inhibition of 23±0.09, 18±0.1 and 16±0.05 mm, against the Klebsiella pneumoniae (K. pneumoniae), Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli strains. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values against K. pneumoniae, S. aureus, and E. coli were found to be 34±0.21 and 72.71±0.47, 47±0.11 and 94.86±0.84 and 94±0.18 and 185.43±0.16 µg/mL, respectively. The biosynthesized ZnNPs resulted in significant eradication of the outer and inner membranes of the bacterial cells. Likewise, the synthesized ZnNPs showed time-dependent photocatalytic degradation activity and revealed 65% methyl orange dye degradation with an irradiation period of 6 hours. The findings of this study suggest the suitability of the novel R. arboreum stem bark-based ZnNPs as an effective ameliorant against bactericidal activities and photocatalysts for the removal of hazardous water contaminants.

$\beta$-decay is one of the key factors to understand the $r$-process and evolution of massive stars. The Gamow-Teller (GT) transitions drive the $\beta$-decay process. We employ the proton-neutron quasiparticle random phase approximation (pn-QRPA) model to calculate terrestrial and stellar $\beta$-decay rates for 50 top-ranked nuclei possessing astrophysical significance according to a recent survey \cite{Nab21}. The model parameters of the pn-QRPA model effect the predicated results of $\beta$-decay. The current study investigates the effect of nucleon-nucleon pairing gaps on charge-changing transitions and the associated $\beta$ decay rates. Three different values of pairing gaps, namely TF, 3TF and 5TF, were used in our investigation. It was concluded that both GT strength distributions and half-lives are sensitive to pairing gap values. The 3TF pairing gap scheme, in our chosen nuclear model, resulted in best prediction with around 80$\%$ of the calculated half-lives within a factor 10 of the measured ones. The 3TF pairing scheme also led to calculation of biggest $\beta$-decay rates in stellar matter.

Previous incidental findings of an increase of suicidal risk among subjects with low cholesterol levels have drawn attention to the role of lipids in suicidal behavior. To date, multiple lines of evidence acquired from clinical studies have confirmed an association between low cholesterol levels and suicidal behavior, but the involvement of dimensional traits including impulsivity and aggression in this association remains elusive. In this narrative review, we aimed to address and synthesize the literature regarding the involvement of lipids in the neurobiology of suicidal behavior and its underlying psychological substrates, impulsivity and aggression. An electronic database search was performed using different combinations of relevant keywords. Both preclinical and clinical studies matching the scope of this article were reviewed and filtered through an inspection of the abstracts to recruit the most suitable articles that contributed essential and substantial findings to the literature. Although subject characteristics and study designs vary across studies, current research has demonstrated that impulsivity and aggression might have shared neurobiologic substrates involved in altered serotonergic neurotransmission. Despite the association between low serum lipid levels and suicidal behavior being well documented, the involvement of lipid subtypes in the pathophysiology of impulsive and aggressive traits remains elusive. Further work is warranted to recognize the roles of lipids in neuronal membrane functions and serotonin metabolism, promote a greater appreciation of identifying biomarkers that could be used to determine at-risk individuals, and develop potential interventions to disrupt the pathogenesis of behavioral phenotypes of suicide.

This study evaluated the using of machine vision in combination with deep learning to identify weeds in real-time for wheat production system. PMAS-Arid Agriculture university research farm were selected for collection of images (6000 total images) of weeds and wheat crops under different weather condition. During growing season, the database was constructed to identify the weeds. For this study two framework were used TensorFlow and PyTorch under CNNs and Deep learning. Deep learning perfromed better with in PyTourch value as compared to another model in Tensorflow. comparing with other networks such as YOLOv4, we concluded that our network reaches a better result between speed and accuracy. Specifically, the maximum precision of weed and wheat plants were 0.89 and 0.91 respectively with 9.43 ms and 12.38 ms inference time per image (640 × 640) NVIDIA RTX2070 GPU.

The author previously investigated the thermodynamic properties of the one-dimensional Potts-SOS model on the lattice of positive natural numbers N in [Akin H, Phys. Scr. 99 (2024), 055231]. In this present paper, we extend that research by determining the Gibbs measures for the same mixed-type model using partition functions constructed on a second-order semi-infinite Cayley tree. By leveraging the self-similarity of the Cayley tree, we analyze the behavior of these partition functions and identify the regions where phase transitions occur. We pinpoint these phase transition regions through a stability analysis of the dynamical system associated with the model at specific fixed points.

COVID-19 infection in high-risk populations is fatal and has a poor prognosis, necessitating a test to determine the protectiveness of immune response. Antibody testing is necessary to determine the body's immune response to COVID-19 infection and also vaccination strategies. Among the various methods available, chemiluminescent immunoassay (CLIA) test is more widely used and accessible to determine antibody levels. This study aimed to determine the protection level of S-RBD SARS-CoV-2 IgG using CLIA compared to Surrogate Virus Neutralization Test (SVNT). The population of this study comprised all healthcare professionals who experienced S-RBD SARS-CoV-2 IgG antibody level examinations. S-RBD SARS-CoV-2 IgG antibody levels were examined using CLIA and SVNT. The cut-off was determined using Receiver Operating Characteristic (ROC) curve and AUC (Area Under the Curve) measurements were evaluated. The result showed a strong positive correlation between S-RBD SARS-CoV-2 IgG CLIA and SVNT with a value of r=0.933 and p <0.001. The value ≥37.29 BAU/mL was determined as the cut-off based on SVNT 30% inhibition level with sensitivity, specificity, positive, and negative predictive values of 96.5%, 90.9%, 96.5%, and 90.9%, respectively. A titer of antibodies greater than or equal to 37.29 BAU/mL with CLIA showed the presence of protective antibodies compared to SVNT.

Cantilever beams are the most widely used form of strain-driven energy harvesting, which uses piezoelectric materials. Although researchers are constantly seeking improved power output from cantilever-beam-driven piezoelectric energy harvesters, a systematic and fundamental analysis of the effect of beam geometry on the power capacity of energy harvesters warrants further investigation. Most of the previous research accounts for beams that are fully coated with piezoelectric material. While a larger coating area increases energy output, it also escalates costs as piezoelectric materials are very expensive. Considering the high cost of piezoelectric materials when dealing with limited piezoelectric material, enhancing power output can be achieved by employing a larger base beam and coating a portion of it at the fixed end. As such, the aim of this work is to investigate a wide variety of cantilever beam shapes (e.g., trapezoidal, triangular, V-cut, concave, and convex) with partial piezoelectric material coating on the base beam to maximize the power output capacity of the harvester. To ascertain a comparable argument, the surface area, volume, and mass of all the considered beam shapes are kept consistent, as these parameters influence the power output of the harvester. The geometry of each shape is systematically varied to understand the effect of geometric configuration on the output power density. Finally, the power capacities of all types of beams are compared, and a design is proposed to obtain the maximum power output. It was found that when the surface area of both the beam and piezoelectric material is kept constant and piezoelectric material is located at the fixed end, a trapezoidal beam with a smaller base width and larger free end width is the most efficient in generating power as long as the structural integrity is maintained. The finding is completely opposite as was suggested by previous studies, which proposed that a trapezoidal beam with a smaller free end yields higher output. Instead, this study demonstrates that an inverted trapezoidal beam produced higher output, considering partial coating compared to the full beam coating used in previous studies. Additionally, a correlation is presented on how the beam resonance frequency shifts with variation in beam parameters.

Recent improvements in deepfake creation have made deepfake videos more realistic. Moreover, open-source software has made deepfake creation more accessible, which reduces the barrier to entry for deepfake creation. This could pose a threat to the people’s privacy. There is a potential danger if the deepfake creation techniques are used by people with an ulterior motive to produce deepfake videos of world leaders to disrupt the order of countries and the world. Therefore, research into the automatic detection of deepfaked media is essential for public security. In this work, we propose a deepfake detection method using upper body language analysis. Specifically, a many-to-one LSTM network was designed and trained as a classification model for deepfake detection. Different models were trained by varying the hyperparameters to build a final model with benchmark accuracy. We achieved 94.39% accuracy on the deepfake test set. The experimental results showed that upper body language can effectively detect deepfakes.

Software fault prediction is the very consequent research topic for software quality assurance. Data driven approaches provide robust mechanisms to deal with software fault prediction. However, the prediction performance of the model highly depends on the quality of dataset. Many software datasets suffers from the problem of class imbalance. In this regard, under-sampling is a popular data pre-processing method in dealing with class imbalance problem, Easy Ensemble (EE) present a robust approach to achieve a high classification rate and address the biasness towards majority class samples. However, imbalance class is not the only issue that harms performance of classifiers. Some noisy examples and irrelevant features may additionally reduce the rate of predictive accuracy of the classifier. In this paper, we proposed two-stage data pre-processing which incorporates feature selection and a new Rough set Easy Ensemble scheme. In feature selection stage, we eliminate the irrelevant features by feature ranking algorithm. In the second stage of a new Rough set Easy Ensemble by incorporating Rough K nearest neighbor rule filter (RK) afore executing Easy Ensemble (EE), named RKEE for short. RK can remove noisy examples from both minority and majority class. Experimental evaluation on real-world software projects, such as NASA and Eclipse dataset, is performed in order to demonstrate the effectiveness of our proposed approach. Furthermore, this paper comprehensively investigates the influencing factor in our approach. Such as, the impact of Rough set theory on noise-filter, the relationship between model performance and imbalance ratio etc. comprehensive experiments indicate that the proposed approach shows outstanding performance with significance in terms of area-under-the-curve (AUC).

Dendrobium okinawense is an endangered epiphytic orchid, and there has been no scientific report so far on its propagation. Protocorm is mass of cell, and protocorm-like bodies (PLBs) look alike protocorm produced by vegetative explants in vitro. Regeneration of PLBs is the most efficient technique for the orchids micro-propagation. We used different light emitting diodes (LEDs) for the efficient PLB organogenesis of D. okinawense. PLBs regenartion under green and red LED surpassed respectively 81.1% and 71.6% in numbers, and respectively 80.8% and 57.8% in fresh weight over white fluorescent light. We manipulated the culture media by different concentrations of PCIB and HMI. PLBs organogenesis promoted by low concentration, it increased respectively 35.9% and 19.3% over control by 0.01 mg/L PCIB and 0.01 ml/L HMI in numbers. Green LED and PCIB independently produced mostly similar numbers of new PLBs. Interestingly, culture media with 0.01 mg/L of PCIB further increased 8.5% of the numbers of PLBs under green LED, whereas the culture media with 0.01 mg/L HMI reduced the number of PLBs under green LED. PLBs culture under green LED with very low concentrations of PCIB manipulated culture media can significantly increase their organogenesis of D. okinawense.

In this paper, we study the deflection angle for wormhole-like static aether solution by using Gibbons and Werner technique in non-plasma, plasma and dark matter mediums. For this purpose, we use optical spacetime geometry to calculate the Gaussian optical curvature, then implement the Gauss-Bonnet theorem in weak field limits. Moreover, we compute the deflection angle by using a technique known as Keeton and Petters technique. Furthermore, we analyze the graphical behaviour of the bending angle ψ with respect to the impact parameter b, mass m as integration constant and parameter q in non-plasma and plasma mediums. We examine that deflection angle is exponentially increasing as direct with charge. Also, we observe that for small values of b, ψ increases and for large values of b the angle deceases. We also considered an analysis to the shadow cast of the wormhole relative to an observer at various locations. Comparing it the the Schwarzschild shadow, shadow cast is possible for wormhole as r<2m. At r>2m, the Schwarzschild is larger. As r → ∞, we have seen that the behavior of the shadow, as well as the weak deflection angle, approaches that of the Schwarzschild black hole. Overall, the effect of plasma tends to decrease the value of the observables due to the wormhole geometry.

The efficiency of a new composite material of the layered double hydroxide (LDH) of ZnMgAl and rice husk biochar (RHB) for the removal of Cu(II) and Pb(II) ions from synthetic wastewater was investigated in this study. The images of scanning electron microscope showed extremely fine crystalline LDH particles decorated on the rough surface of the RHB while the succesful formation of the composite adsorbent (LDH/RHB) was confirmed by the corresponding energy dispersive X-ray and the Fourier-transform infrared spectroscopy. An equilibrium contact time of 30 and 15 min for Cu2+ and Pb2+, respectively, was proposed for the optimum performance of the batch adsorption process. The dose of the LDH/RHB adsorbent was optimized at 0.4 g yielding maximum adsorption capacities of 117 and 124 mg g-1 for Cu2+ and Pb2+, respectively, with corresponding maximum removal efficiencies of nearly 94% and 99%. The initial meta concentrations was optimized at 50 or 60 mg L-1 corresponding to maximum removal efficiencies or adsorption capacities. For the changing initial metal’s concentration, the removal efficiencies remained unchanged for up to 50 mg L-1 and decreased by about 50% by increasing the initial concentrations from 50 to 100 mg L-1. The adsorption capacities observed a linear increasing trend by increasing the initial concentrations from 5 to 60 mg L-1 and remained unchanged afterward up to 100 mg L-1. A solution pH of 6.0 yielded optimum results with an increasing trend in adsorption capacities and percentage removal by changing the solution pH from 2.0 to 7.0. Based on the best-fit of the pseudo second-order kinetic model to the experimental data, the chemisorption was suggested to be the controlling mechanism of adsorption. The fitting of the Langmuir model suggested a monolayer sorption of Cu2+ and Pb2+ in addition to a heterogeneous adsorption as supported by the fitting of the Temkin isotherm. The application of the Dubinin–Radushkevich isotherm proposed a physical adsorption (mean free energy of adsorption less than 8 kJ mol−1) of both heavy metal ions on the surface of the LDH/RHB adsorbent.

Proteins possess complex three-dimensional structures, and these structures are stable only within specific ranges of temperature which mostly correspond to the temperature ranges of the host organisms. However, few exceptional proteins, called heat-stable proteins, are stable at temperatures that are substantially higher than those tolerated by the host organisms themselves. Most of the heat-stable proteins possess heat stability to perform their functions at high temperatures, but some of them are intrinsically heat-stable due to their structure. Heat-stable proteins are usually divided into three or four groups depending upon the intricacies of their structures and thermal behaviors. Their peculiar property, i.e. heat-stability, makes them very valuable in applications such as polymerase chain reaction, industrial processes requiring high temperature, and protein engineering. Heat-stability also makes it feasible to purify such proteins, from the rest of the heat-labile proteins, using a simple heat-treatment method. Moreover, heat treatment can be used as a combined cell-lysis and protein purification step which, as compared to conventional methods, can result in a higher yield of heat-stable proteins. Furthermore, some special heat-stable proteins, i.e. intrinsically disordered proteins (which include the proteins involved in important neurodegenerative diseases), need heat-treatment step, in some cases, as the only way for their successful purification and study. Hence, this paper provides a first-ever comprehensive review of all major aspects of heat-stable proteins, i.e., their structure, evolution, classification, significance, and heat-treatment mediated purification.

The aim of this article is introduced the concept of double framed T-soft fuzzy set (DFT-soft fuzzy set) which is the combination of soft set and fuzzy set. We also defined the notions and apply this concept in BCK/BCI-algebras. By using example, we also discussed the concept of double framed T-soft fuzzy algebra (DFT-soft fuzzy algebra) and double framed B-soft fuzzy algebra (DFB-soft fuzzy algebra) and also investigated their properties. Each double framed T-soft fuzzy algebra is double framed B-soft fuzzy algebra but by using example, we proved that converse may or may not be possible.

This research is aimed at evaluating two different scenarios, firstly, appraising the impacts of employing the concepts of Total Quality Management (TQM) to the construction projects in Saudi Arabia. The results of the study were obtained through utilization of a descriptive analytical approach, where 300 questionnaires were distributed to engineering firms and companies with a response rate of 200 questionnaires, hence achieving the study sample for this research. The data gathered was analyzed by applying the Statistical Package for Social Science (SPSS) program and calculating the Relative importance index (RII) and the mean values. From the research conducted, the outcomes showed that the management’s ability to commit using TQM while applying BIM obtained a relative importance of (0.717), while the relative importance for the management’s ability to commit using TQM without the application of BIM is (0.552). The results showed that construction projects in Saudi Arabia still sustain setbacks from applying TQM concepts and suffer from the lack of administrative, scientific and technical applications. In a second scenario, a hybridized support vector regression (SVR) Harris-hawks optimization (HHO) (i.e., SVR-HHO) were used to predict the TQM. The performance accuracy of the models was checked through three different evaluation metrics namely; mean square error (MSE), correlation co-efficient (CC) and Nash-Sutcliffe efficiency (NSE). the hybridized emerging SVR-HHO outperformed the other two data driven approaches in both the training and testing stages based on the employed evaluation metrics. Overall, the obtained results showed that both the machine learning and metaheuristic approaches were capable of predicting TQM.

The COVID-19 pandemic, which has affected the entire world, has not only created a number of emerging issues for each country, especially in the field of public health, but has also provided a number of opportunities for risk management, alternative strategies and completely new ways of looking at challenges. This paper examines the COVID-19 pandemic response in Türkiye and the possible implications of the experience for future responses to other health emergencies and disaster risk management, based on the lessons learned. This study uses publicly available literature from government, private sector, and academic sources to analyse the conflicts, changes and lessons learned during the COVID-19 pandemic, which are components of the World Health Organization (WHO) Health Emergency and Disaster Risk Management (Health EDRM) framework. The COVID-19 experience in Türkiye has several aspects, including the significant role of healthcare workers, the existence of an effective health system accustomed to emergencies, applications based on information technologies, partial transparency of public authorities in providing information, and socio-cultural environment related to cooperation on prevention strategies, including wearing masks and vaccination. Challenges in Türkiye include distance learning in schools, lockdowns that particularly affect the elderly, ensuring environmental sustainability, hesitation about the effectiveness of social/financial support programmes, socio-cultural trivialisation of pandemics after a while, and relaxation of prevention strategies. Lessons learned from the COVID-19 pandemic include the value of transparency in public health/healthcare information, the strengthening of all aspects of the health system in terms of health workers, and the importance of a balanced economy prepared for foreseeable risks.

Over the past few years, we have experienced great technological advancements in the information and communication field, which has significantly contributed to reshaping the Intelligent Transportation System (ITS) concept. Evolving from the platform of a collection of sensors aiming to collect data, the data exchanged paradigm among vehicles is shifted from the local network to the cloud. With the introduction of cloud and edge computing along with ubiquitous 5G mobile network, it is expected to see the role of Artificial Intelligence (AI) in data processing and smart decision imminent. So as to fully understand the future automobile scenario in this verge of industrial revolution 4.0, it is necessary first of all to get a clear understanding of the cutting-edge technologies that going to take place in the automotive ecosystem so that the cyber-physical impact on transportation system can be measured. CIoV, which is abbreviated from Cognitive Internet of Vehicle, is one of the recently proposed architectures of the technological evolution in transportation, and it has amassed great attention. It introduces cloud-based artificial intelligence and machine learning into transportation system. What are the future expectations of CIoV? To fully contemplate this architecture’s future potentials, and milestones set to achieve, it is crucial to understand all the technologies that leaned into it. Also, the security issues to meet the security requirements of its practical implementation. Aiming to that, this paper presents the evolution of CIoV along with the layer abstractions to outline the distinctive functional parts of the proposed architecture. It also gives an investigation of the prime security and privacy issues associated with technological evolution to take measures.

Robotics and autonomous technologies enable space travel. Robotics change space colonization. We study space-based robotics. Human-centric missions need robotics. Vision, decision-making, movement, and manipulation follow. These developments influence resource utilization, extravehicular activities, planetary surface exploration, long-duration space missions, and colonization. Robots improve research, productivity, and astronaut safety but present problems. Highlighting research and knowledge gaps. Space ethics, human-robot interaction, and failure recovery are gaps. This extensive study showed how robots and autonomous systems may transform space exploration and colonization. Researchers, engineers, and mission planners may benefit. Robotics and autonomy will improve space exploration.

The SARS-CoV-2 was confirmed to cause the regional outbreak of coronavirus disease 2019 (COVID-19) in Wuhan, China. The 3C-like protease (3CL^pro), an essential enzyme for viral replication, is a valid target to compacts SARS-CoV and MERS-CoV. In this research, an integrated library consisting of 1000 compounds from Asinex Focused Covalent (AFCL) library and 16 FDA-approved protease inhibitors were screened against SARS-CoV-2 3CL^pro. Top compounds with significant docking scores and making stable interactions with catalytic dyad residues were obtained. The screening results in identification of compound 621 from AFCL library as well as Paritaprevir and Simeprevir from FDA-approved protease inhibitors as potential inhibitors of SARS-CoV-2 3CL^pro. The mechanism and dynamic stability of binding between the identified compounds and SARS-CoV-2 3CL^pro were characterized using 50 nanoseconds (ns) molecular dynamic (MD) simulation approach. The identified compounds are potential inhibitors worthy of further development as SARS-CoV-2 3CLpro inhibitors/drugs. Importantly, the identified FDA-approved therapeutics could be ready for clinical trials to treat infected patients and help to curb the COVID-19.

More than fifty million people over the age of fifty have osteoporosis issues due to low bone mass, disease contribution, and not exercising continuously. Certain most important risk factors and causes of osteoporosis contain age, gender, hormones, visits to inexperienced doctors, and certain medical conditions. In this manuscript, we diagnosed certain frank operational laws under the availability of complex intuitionistic fuzzy (CIF) information. Furthermore, using the evaluated operational laws, we pioneered the theory of CIF frank weighted averaging (CIFFWA), CIF frank ordered weighted averaging (CIFFOWA), CIF frank hybrid averaging (CIFFHA), CIF frank weighted geometric (CIFFWG), CIF frank ordered weighted geometric (CIFFOWG), CIF frank hybrid geometric (CIFFHG) operators, and described their beneficial and valuable results with certain useful properties. Moreover, we aim to evaluate the most dangerous type of osteoporosis based on their symptoms, causes, and risk factors using diagnosed approaches. Finally, to enhance the worth of the evaluated operators, we compare the diagnosed result with certain prevailing results and illustrated their geometrical representation with the help of MATLAB.

(1) Introduction: External high volume extraction devices may offer a way to reduce any aerosol particulate generated. The aim of this study was to measure the particle count during dental aerosol procedures and compare the results to when a High Volume Extraction device is used; (2) Methods: A comparative clinical study measuring the amount of PM1, PM2.5 and PM10 aerosol particulate with and without the use of an external High Volume Extraction device was undertaken. In total, 10 restorative procedures were monitored with an an industrial Trotec PC220 particle counter. The air sampler was placed at the average working distance of the clinicians involved in the study - 420mm.; (3) Results: In the present study aerosol particulate was recorded at statistically significantly increased levels during dental procedures without an external high volume extraction device versus with the device. The null hypothesis was rejected, in that significant differences were found between the results of the amount of aerosol particle count with and without a High Volume Extraction device.; (4) Conclusion: If the results of the present study are repeated in an in vivo setting, an external high volume suction device may potentially lower the risk of transmission of viral particulate.

The overall seismicity of Pakistan from 24 B.C to 2020 is analysed in terms of its multifractal behaviour. Seismic events of magnitude ML=3.0 and above are spatially clustered into four distinct groups, each one corresponding to a different region of high seismic activity. The Multifractal Detrended Fluctuation Analysis (MFDA) method applied on each cluster reveals pronounced inter-cluster heterogeneity in terms of the resulting generalised Hurst exponent and fractality spectrum, possibly due to the particular tectonic characteristics of the regions under investigation. Additional results on the variability of the Gutenberg–Richter b‐value across the defined clusters further corroborate the uniqueness of the seismic profile of each region.

Hearing impairment is an immensely diagnosed genetic cause, 5% of the total world population effects with different kind of congenital hearing loss (HL). In third-world countries or countries where consanguineous marriages are more common the frequency rate of genetic disorders are at its zenith. Approximately, the incidence of hearing afflictions is ostensibly 7-8:1000 individuals whereas it is estimated that about 466 million peoples suffer with significant HL, and of theses deaf cases 34 million are children’s up to March, 2020. Several genes and colossal numbers of pathogenic variants cause hearing impairment, which aided in next-generation with recessive, dominant or X-linked inheritance traits. This review highlights on syndromic and non-syndromic HL (SHL and NSHL), and categorized as conductive, sensorineural and mixed HL, which having autosomal dominant and recessive, and X-linked or mitochondrial mode of inheritance. Many hundred genes involved in HL are reported, and their mutation spectrum becomes very wide. Mapping of pathogenic genes in consanguinity family is facilitated to understand the disease history. Review presents the bases of HL and also focused on various genetic factors that cause deafness like the basics of genetic inheritance, and classic and well-characterized inherited factors of it. It also overviews the application of linkage analysis, SNPs genotyping and whole exome sequencing methods, in mapping and identification of new locus, causative genes and their variants in families inherited with HL. Conclusively, this review supports researchers in understanding the location of chromosome, the causative genes and specific locus which causing deafness in humans.

Background. Rheumatoid arthritis (RA) is a chronic inflammatory and autoimmune disorder which affects the joints in the wrists, fingers, and knees. RA is often associated with depressive and anxiety symptoms as well as chronic fatigue syndrome (CFS)-like symptoms.Aim. To examine the association between depressive symptoms (measured with the Beck Depression Inventory, BDI), anxiety (Hamilton Anxiety Rating Scale, HAMA), and CFS-like (Fibro-fatigue Scale) symptoms and immune-inflammatory, autoimmune, and endogenous opioid system (EOS) markers, and lactosylceramide in RA. Methods. The serum biomarkers were assayed in fifty-nine RA and fifty-nine patients without increased psychopathology (PP) and fifty healthy controls.Results. There were highly significant correlations between the BDI, FF, and HAMA scores and severity of RA, as assessed with the DAS28-4, clinical and disease activity indices, the number of tenders and swollen joints, and patient and evaluator global assessment scores. A common latent vector (reflective model) could be extracted from the PP and RA-severity scales, which showed excellent psychometric properties. Partial least squares analysis showed that 69.7% of the variance in this common core underpinning PP and RA symptoms could be explained by the regression on immune-inflammatory pathways, rheumatoid factor, anti-citrullinated protein antibodies, CD17, and mu-opioid receptor levels. Conclusions. Depression, anxiety, and CFS-like symptoms due to RA are reflective manifestations of the phenome of RA and are mediated via the effects of the same immune-inflammatory, autoimmune, and EOS pathways and lactosylceramide that underpin the pathophysiology of RA. These PP symptoms are clinical manifestations of the pathophysiology of RA.

The relationship of Amyotrophic Lateral Sclerosis, Parkinson Disease and other age-related neurodegenerative diseases associated with mitochondrial dysfunction has led to study of the mitochondrial fission gene Drp1 in Drosophila. Drp1 can interact with mitochondrial proteins including parkin and the Drosophila Bcl-2 proteins. Mutations in Drp1 can lead to mitochondrial dysfunction and neuronal loss. Ddc-Gal4 was exploited to direct the expression of Drp1 and the inhibition of Drp1 in neurons. Here, the inhibition of Drp1 seems to compromise locomotor function throughout life but does not alter longevity. The consequences of Drp1 overexpression can be suppressed through overexpression of pro-survival Bcl-2 gene Buffy or by inhibition of the pro-cell death Bcl-2 homologue Debcl. The expression of Buffy suppresses the poor climbing induced by loss of Drp1 function. Interestingly, the loss of parkin function is rescued by the directed inhibition of Drp1. Alteration of the expression of Drp1 acts to phenocopy neurodegenerative disease phenotypes in Drosophila, while overexpression of Buffy can counteract these phenotypes to improve overall health. The pro-survival effect of Buffy can rescue the phenotypic effect due to the Drp1-induced apoptosis. The diminished health due to either overexpression or inhibition of Drp1 has produced a novel model to investigate mechanisms underlying neurodegenerative disease.

Background. There is strong comorbidity between atherosclerosis (ATS) and depression which is attributed to increased atherogenicity, insulin resistance (IR), and immune and oxidative stress.Aim of the study. To examine the role of the above pathways and mu opioid receptor (MOR), β-endorphin, zinc, copper, vitamin D3, calcium, and magnesium in depression due to ATS / unstable angina (UA).Methods. Biomarkers were assayed in 58 controls and 120 ATS patients divided into those with moderate and severe depression according to the Beck Depression Inventory (BDI)-II score > 19 and > 29, respectively. Results. Neural network and logistic regression models showed that severe depression due to ATS/UA was best predicted by IL-6, UA, MOR, zinc, β-endorphin, calcium and magnesium and that moderate depression was associated with IL-6, zinc, MOR, β-endorphin, UA, atherogenicity, IR, and calcium. These neural networks yielded a significant discrimination of severe and moderate depression with an area under the ROC curve of 0.831 and 0.931, respectively. Using Partial Least Squares analysis, 66.2% of the variance in a latent vector extracted from the ATS/UA clinical features, BDI-II scores, atherogenicity, and IR could be explained by the regression on IL-6, IL-10, zinc, copper, calcium, MOR, and age. The BDI-II scores increased from controls to ATS to UA class III to UA class IV.Conclusions. Depression due to ATS/UA is a reflective manifestation of increased atherogenicity and IR, which are modulated by immune activation, aberrations in the endogenous opioid system, antioxidants, trace elements, and macrominerals.

It is important to develop new antibacterial drugs since the emergence of bacterial resistance to available antibiotics. Metal nanoparticles have the potential to combat antibiotic resistance and are effective antibacterial agents. Here, we demonstrate the biogenic production of zinc nanoparticles using Rhododendron arboreum stem bark. The biosynthesized ZnNPs were characterized through different analytical techniques such as UV-vis, FTIR, EDX, SEM, and XRD. Clinical isolates such as E. coli, S. aureus, and K. pneumonia were used to check the antibacterial efficacy of the biosynthesized zinc nanoparticles. The MIC and MBC values against K. pneumonia, S. aureu, and E. coli were found to be 34±0.21 and 11.71±0.47, 47±0.11 and 23.86±0.84 and 94±0.18 and 40.43±0.16 µg/mL, respectively. It dramatically decreased the integrity of the cell membrane and markedly increased the permeability of both inner and outer membranes. The green synthesized ZnNPs have good catalytic activity. It degraded 65% of methyl orange dye within 6h when the mixture was kept in direct sunlight, thus demonstrating good photodegradation potential and can be employed as a good photocatalyst. According to these results, biosynthesized zinc nanoparticles could be a potential therapy option for controlling bacterial pathogenesis and an effective photocatalyst for the elimination of hazardous water contaminants.

Fuel gas network (FGN) synthesis is a systematic method for reducing fresh fuel consumption in a chemical plant. In this work, we address the synthesis of fuel gas network using block superstructure originally proposed for process design and intensification (Demirel et.al. [1]). Instead of a classical source-pool-sink superstructure, we consider a superstructure with multiple feed and product streams. These blocks interact with each other through direct flows that connect a block with its adjacent blocks and through jump flows that connect a block with all blocks. The blocks with feed streams are viewed as fuel sources and the blocks with product streams are regarded as fuel sinks. Addition blocks can be added as pools when there exists intermediate operations among 9 source blocks and sink blocks. These blocks can be arranged in a I × J two-dimensional grid with I = 1 for problems without pools, or I = 2 for problems with pools. J is determined by the maximum number of pools/sinks. With this representation, we formulate fuel gas network synthesis problem as a mixed-integer nonlinear (MINLP) problem to optimally design a fuel gas network with minimal total annul cost. We present a real-life case study from LNG plant to demonstrate the capability of the proposed approach.

Especially in the last two decades, due to the developments in durable mechanical circulatory support (MCS) technology and applications, left ventricular assist (LVAD) implantation has become used in more fragile end-stage heart failure patients with higher risk. Despite advances in technology and patient care processes, right heart failure remains the leading cause of morbidity and mortality after durable LVAD implantation. It is difficult to make decisions about the type and duration of MCS during preoperative evaluation, and many clinical, hemodynamic, biochemical and echocardiographic criteria must be taken into account when evaluating the right ventricle. Complex quantitative scoring systems, including measurements of different risk factors for postimplant right ventricular failure, and composite variables, including the anatomical and functional status of the right ventricle, have been used to decide between left or biventricular assist device implantation. The successful use of artificial intelligence (AI) and machine learning (ML) in various applications in the medical field has paved the way for the idea of using it to better predict possible conditions such as right heart failure after LVAD implantation. This review aims to evaluate the current situation of risk prediction models using AI and ML technology, which have become popular in recent years, and possible future developments in predicting right heart failure after the application of durable MCS systems.

Hybrid Renewable Energy Systems (HRES) integrate renewable sources, storage, and optionally conventional energies, offering an eco-friendly solution to fossil fuels. Microgrids (MGs) bolster HRES integration, enhancing energy management, resilience, and reliability at various levels. This study, emphasizing the need for refined optimization methods, investigates three themes: renewable energy, microgrid, and multiobjective optimization (MOO), through a bibliometric analysis of 470 Scopus documents from 2010-2023, analyzed with SciMAT software. It segments the research into two periods, 2010-2019 and 2020-2023, revealing a surge in MOO focus, especially in the latter period, with a 35% increase in MOO-related research. This indicates a shift towards com-prehensive energy ecosystem management that balances environmental, technical, and economic elements. The initial focus on MOO, genetic algorithms, and energy management systems has expanded to include smart grids and electric power systems, with MOO remaining a primary theme in the second period. The increased application of Artificial Intelligence (AI) in optimizing HMGS within the MOO framework signals a move towards more sustainable, intelligent energy solutions. Despite progress, challenges remain, including high battery costs, the need for reliable MOO data, the intermittency of renewable energy sources, and HMGS network scalability issues, highlighting directions for future research.

The physical properties of a structure such stiffness although can be determined by some statical tests, the identification of damping parameter requires a dynamic test. In general, both theoretical prediction and experimental identification of damping are quite difficult. There are many different techniques available for damping identification, and each method gives a different damping parameter. The dynamic indentation method, rheometry, atomic force microscopy, and resonant vibration tests are commonly used to identify the damping of materials, including soft materials. While the viscous damping ratio, loss factor, complex modulus and viscosity are quite common to describe damping of materials, there are also other parameters such as the specific damping capacity, loss angle, half-power bandwidth, and logarithmic decrement to describe damping of various materials. Often one of these parameters is measured in practical applications and the measured damping parameter needs to be converted into another damping parameter for comparison purposes. In this review, the theoretical derivations of different parameters for the description and quantification of damping and their relationships, and the methods for damping identification are presented. The expressions for both high damping and low damping are included and evaluated. This paper could be a primary resource for damping research and teaching.

Aerated concrete, which is manufactured from binding material, sand, foaming agent and water, is currently being utilized in the construction industry because of its lightweight and durability. The binding material, cement, along with other materials used in the concrete produces huge carbon footprints during its fabrication. The utilization of natural aggregates name as coarse aggregates depletes the natural resources of the country. Therefore, huge amounts of agricultural wastes have led scholars to investigate the effectiveness of replacing conventional materials used in concrete with agricultural wastes. In the current study, rice husk ash (RHA) was used as supplementary cementing material, thereby reducing the amount of cement used in aerated concrete (AC) mixture will reduce carbon footprints. The experimental and numerical analysis were conducted to investigate structural behavior of reinforced RAC- B beams subjected to flexural load. Parametric study on structural performance of RAC- B beam under flexure were conducted using finite element analysis (FEA). From the experiment and FEA. Results from the parametric study showed that RAC-10%RHA-B with higher depth structurally performed better compared to RAC-B under flexure with greater load carrying capacity, lesser maximum deflection, and less cracks developing in the tension area.

Beta thalassemia major (β-TM) disorder characterized by the lack, or severe reduction in the production of hemoglobin β-globin chains. The standard protocol for the management of β-TM is blood transfusion and iron chelation therapy to reduce the iron overload state. The present study aimed to investigate the relationships between two iron regulatory hormones, hepcidin (HEPC) and erythroferrone (ERFE) levels and iron status parameters (ISPs) in Iraqi patients with β-TM. ISPs and hormones were measured in sixty patients and compared with thirty healthy controls. The results indicated significant changes in different iron status parameters, while ferritin (FRT) with the ~11 fold increase showed the most change. Significant reduction in HEPC and increase in ERFE levels were detected in patients as compared to the control group, while no direct correlation was identified with the other measured ISPs. Receiver operating characteristic (ROC) analysis showed that the z-score of the composite of ERFE+FRT has a full diagnostic ability for β-TM. In conclusion, our finding indicated the correlation between different ISPs, FRT as the leading predictor of iron overload and tow main iron regulatory hormones.

In a densely populated country like Bangladesh, universities grapple with the challenge of efficiently addressing myriad queries from a large student body, leading to a heightened workload for university stakeholders. To tackle these challenges, we introduce PixieGPT, a tailor-made Generative Pre-Trained Transformer for Bangladeshi universities. PixieGPT significantly mitigates workload by adeptly handling common university-related queries, thereby enhancing user experience. The hierarchical structure plays a crucial role in managing diverse queries from thousands of students about the university system. The solution introduces a modular hierarchical knowledge base (KB) with simpler complexities, addressing the intricacies of efficiently managing large volumes of queries. PixieGPT is designed in a modular way so that the solution is also adaptable for the implementation of other universities worldwide based on the requirements of a particular administrative system. The modular nature facilitates easy adaptation with minor changes based on specific university requirements, ensuring a seamless integration process. This paper delves into the intricacies of PixieGPT's design, emphasizing its pivotal role in mitigating workload challenges for university stakeholders in Bangladesh. The incorporation of BERT for Natural Language Understanding(NLU) and GPT models for Natural Language Generation(NLG) enhances PixieGPT's capabilities, contributing to the scalability and efficiency of the system. The presented use case underscores the practical benefits of PixieGPT, positioning it as a promising solution for universities globally with similar operational frameworks.

This study investigates how Electronic Livestock Health Recording Systems (ELHRs) facilitates the detection of disease burden and make cluster analysis by applying data analytics tools and techniques. A sample size of 18333 livestock disease cases reported from 2007-2015 by the Ministry of Agriculture of the Federal Democratic of Ethiopia was used for data collection. The results showed that ELHRs are important as livestock disease data preservers, saving costs, and facilitating the extraction of up-to-date and complete information. Euclidean and Manhattan distance performed well at 98%, while cosine distance measurement metrics performed poorly. Finally, with the application of the selected clustering techniques, metrics, tools, and dataset, it has been attempted to successfully detect an optimal number of disease clusters and meet the objectives of the study.

The Internet of Things (IoT) has become one of the most attractive domains nowadays. It works by creating a special network between physical devices such as vehicles, home equipment, and other items. In recent days, the common technologies of communication such as Wi-Fi and 2G/3G/4G cellular are insufficient for the IoT networks because they are designed to serve appliances with immense processing capabilities such as laptops and PCs. Moreover, most of these technologies are centralized and use an existing infrastructure. Currently, the new communication technologies such as Z-Wave, 6LowPAN, and Thread are dedicated to the IoT and have been developed to meet its requirements. These technologies can handle many factors such as range, data requirements, security, power demands, and battery life. Nevertheless, the security issues in IoT systems have major concerns and matters because vulnerabilities in such systems may result in fatal catastrophes. In this paper, an enhanced IoT security framework for authentication and authorization is proposed and implemented to protect the IoT protocols from different types of attacks such as man-in-the-middle attack, reply attack, and brute force attack. The proposed framework combines an enhanced token authentication that has identity verification capabilities and a new sender verification mechanism on the IoT device side based on time stamp, which in turn can mitigate the need for local identity verification methods in IoT devices. The proposed IoT security framework is tested using security analysis with different types of attacks compared with previous related frameworks. The analysis shows the high capability of the proposed framework to protect IoT networks against many types of attacks compared with current available security frameworks. Finally, the proposed framework is developed using Windows application to simulate the framework phases, check its validity through the real network, and calculate the payload time is adds.

New research points to a possible link between Autism Spectrum Disorder and the gut microbiota as many autistic children have co-occurring gastrointestinal problems. This review focuses on specific alterations of gut microbiota mostly observed in autistic patients. Particularly, the mechanisms through which such alterations may trigger the production of the bacterial metabolites or leaky gut in autistic people are described. Various altered metabolite levels were observed in autistic children, many of those were of bacterial origin such as short chain fatty acids (SCFAs), indoles and lipopolysaccharides. A less integrative gut-blood-barrier is abundant in autistic individuals. This explains the leakage of bacterial metabolites into the patients triggering new body responses or altered metabolism. Some other co-occurring symptoms such as mitochondrial dysfunction, oxidative stress in the cells, altered tight junctions in the blood brain barrier and structural changes in cortex, hippocampus, amygdala and cerebellum were detected. Moreover, this paper suggests that autism is associated with an unbalanced gut microbiota (dysbiosis). Although the cause-effect relationship between autism and gut microbiota is not yet well established, consumption of specific probiotics may represent a powerful tool to re-establish gut homeostasis and promote gut health. Diagnostic and therapeutic value of new biomarkers leading to the perturbation in the phenylalanine metabolism will be discussed.

Although buildings constitute 35% of global energy use and 38% of carbon emissions from energy, the amount of energy and energy-related carbon emissions are increasing rapidly. On the other hand, non-renewable usable energy resources are decreasing on the contrary. New buildings are being built due to the increasing population and the existing building stock not meeting the needs or losing its lifespan. Some of the existing building stock is demolished and renewed for structural reasons and some for reasons such as usage performance. It is possible to reduce both energy consumption and greenhouse gas emissions with strategic energy uses in existing building stocks. There are various techniques to measure the maximum performance of sustainable and energy-efficient use of existing building stocks with which changes. Building Information Modeling (BIM) technology is one of these techniques that provides wide opportunities to users in recent years, and it is almost a virtual laboratory of structures. Building stocks can be modeled with BIM, and alternative shell and system suggestions can be used to measure how building performance has changed and to achieve the best results. In this research study, improvement scenarios that optimize energy use in existing building stocks are investigated on a sample residential building by using the virtual laboratory facilities of BIM. After measuring the current energy performance of the existing building with BIM tools, 192 alternative results were obtained with 6 variables (external walls, roof, insulation layers, transparent surface materials, lighting, and photovoltaic panels). The obtained alternatives were compared with the current state of the existing building. The material expenditures and amortization periods required for these alternative scenarios are also calculated. The results obtained were evaluated according to annual / lifetime energy consumption, fuel, electricity, initial investment costs, energy use intensity, and carbon emission amounts. With the optimization of the current situation of the sample building, annual fuel consumption decreased by 61% and electricity consumption by 64%. The amortization period of the optimum improvement was determined as 12 years.

This study investigates effective strategies for second language education in primary schools, analyzing the efficacy of immersive and interactive methods, digital literacy tools, and mixed-method approaches. The findings reveal significant improvements in language proficiency and student engagement through these methodologies, with immersive and interactive strategies showing substantial benefits in oral proficiency and engagement, digital tools enhancing accessibility and engagement, and mixed-method approaches yielding the highest overall effectiveness. The study underscores the importance of a balanced, flexible approach to language education, integrating traditional and modern methods to cater to diverse learner needs. These strategies not only advance linguistic skills but also contribute to the broader cognitive and emotional development of young learners, emphasizing the critical role of effective language education in preparing students for a globalized world.

In this paper, we consider the one-dimensional Ising model (shortly, 1D-MSIM) having mixed spin-(s,(2t−1)/2) with nearest neighbors and the external magnetic field. We establish the partition function of the model by means of the transfer matrix. Under a null boundary condition, we compute certain thermodynamic quantities for the 1D-MSIM. We find some precise formulas to determine the model’s free energy, entropy, magnetization, and susceptibility. By examining the model’s associated iterative equations, we use the cavity approach to investigate the phase transition problem. We numerically determine the model’s periodicity.

Among the leading causes of cancer mortality, prostatic adenocarcinoma (PaC) is at second to lung carcinoma, but it is the most commonly happening non-cutaneous malignancy in elderly men in the world. Therapeutic options for PaC depend on age, growth & stage of malignancy, the desired outcomes and shortcomings of available treatment, estimated cost and patient compliance. Patients older than 60 years with a sluggish localized tumor may be placed on active surveillance, otherwise go with transurethral resection of the prostate (TURP), prostate artery embolization (PAE) and pelvic lymphadenectomy with/without radiation therapy. For metastatic PC androgen-deprivation therapy is an option with or without surgery. These agents decline the body’s testosterone production or block its activity by gonadotropin- releasing hormone (GnRH) analogues including leuprolide acetate and goserelin acetate implant. The hormone’s activity can be stopped by androgens antagonist such as flutamide, bicalutamide and nilutamide along with chemotherapeutic agents, such as taxanes (e.g., docetaxel, paclitaxel) but after all the disease relapses in 20-30% of patients. So, new immunological or vaccine-based therapeutic moieties have been investigated to meet the objective of providing selectivity to cancerous cells and desired therapeutic outcomes with less/no harmful effects to normal cells. The chimeric version, oncolytic poliovirus and human rhinovirus i.e. PVSRIPO is most promising feature in cancer therapeutics and activate innate immunity by neutrophils infiltration via PAMP & DAMP pathways while Sipuleucel-T expresses major histocompatibility complex (MHC) which can stimulate CD4+ helper T-cells and CD8+ cytotoxic T-cells and ultimately activate the acquired immunity against cancer cells. In this article, we have discussed the role of genetic predisposition and chemotherapeutic approaches including oncolytic poliovirus for the treatment of PaC in order to better understanding of tumor biology and mechanisms involved in chemotherapeutic drugs based resistance.

Particle-mediated elasticity/viscoelasticity imaging has potential to expand the elasticity imaging field, as it can provide accurate and local tissue elastic properties as well as density, Poisson’s ratio, and viscosity. Here, we investigated elasticity imaging based on the use of small particles located within the tissue and at the tissue interface exposed to a static and dynamic external load. First, we discuss elasticity/viscoelasticity imaging methods based on the use of particles (bubbles and rigid spheres) located within the tissue. Elasticity/viscoelasticity imaging techniques based on the use of particles (bubbles, rigid and soft spheres) located at the tissue interface are then presented. Based on new advances, we updated some of the models for the responses of the particles located within the tissue and at the tissue interface available in the literature. Finally, we compared the mathematical models for the particles located within the tissue and at the tissue interface and evaluated the elasticity/viscoelasticity imaging methods based on the use of small particles. Therefore, instead of the use of the term elasticity imaging, we suggest the use of the term viscoelasticity imaging.

Shared micromobility has gained significant attention in the field of transportation engineering in recent years as an environmentally friendly, convenient, and easily accessible transportation mode. Like other medium-sized cities, Birmingham, Alabama implemented a shared micromobility pilot program in 2021 that captured the attention of local travelers. This study examined shared e-scooter usage and associated travel patterns in Birmingham using 2021-2022 field data. From these data, ArcGIS maps were used to showcase trip origins and destinations. To gain a further understanding of e-scooter travel patterns in the study area, zip code and block group densities were calculated. Additionally, a negative binomial regression model was constructed to identify determinants of shared e-scooter trips. The analysis results showed that the usage of shared e-scooters was the highest during the nighttime, on weekends, and in the fall season. Furthermore, the research findings indicated that shared e-scooters experienced their highest utilization rates in areas with a higher proportion of educated and higher-income individuals. These findings suggest that travelers’ mode choice related to the use of micromobility modes is influenced by environmental and demographic factors. Overall, this case study offers valuable contributions to the understanding of the role of shared e-scooters in Birmingham's transportation landscape and can guide transportation authorities in other medium-sized cities in their efforts to plan for micromobility options.

In the last years evidence has emerged that neurodegenerative diseases (NDs) are strongly associated with the microbiome composition in the gut. Parkinson’s disease (PD) is the most intensively studied neurodegenerative disease in this context. In this review, we performed a systematic evaluation of published literature comparing changes in colonic microbiome in PD to the ones observed in other NDs including Alzheimer’s Disease (AD), Multiple system atrophy (MSA), Multiple sclerosis (MS), Neuromyelitis optica (NMO) and Amyotrophic lateral sclerosis (ALS). To warrant comparability of different studies, only human case-control studies were included. Several studies showed an increase of Lactobacillus, Bifidobacterium, Verrucomicrobiaceae and Akkermansia in PD. A decrease in PD was observed of Faecalibacterium spp., Coprococcus spp., Blautia spp., Prevotella spp. and Prevotellaceae. On low taxonomic resolution, like phylum level, the changes are not disease specific and inconsistent. However, on higher taxonomic resolution like genus or species level, a minor overlap was observed between PD and MSA, both alpha synucleinopathies. We show that a methodical standardization of sample collection and analysis is necessary for ensuring the reproducibility and comparability of data. We also provide the evidence, that assessing the microbiota composition at high taxonomic resolution, reveals changes in relative abundance, that may be specific or characteristic for one disease, or a disease-group and might evolve discriminative power. The interactions between bacterial species and strains and moreover the co-abundances must be more deeply investigated before assumptions of the effects of specific bacteria on the host can be made with certainty.

Human existence and development ever demanded suitable shelter, the dual direc-tion relationship of human-residence have always been a material dealt with to enhance residential living conditions. The emersion of COVID-19 pandemic had introduced ab-rupt and dramatic changes in human life protocols, that exerted clear pressure on differ-ent sectors within the built environment. Housing beard great impact due to needs of so-cial distancing and quarantine obligations to increase chances of human existence. In order to measure human adaptation and residence alterations following new residential requirements, Quality of life investigations to promotse better built environment for oc-cupants had been facilitated using theory of residential dissatisfaction already been adopted in current study. Residents’ responses had been extracted regarding their dissat-isfaction applying Likert scale for measurement and evaluation. The study focused on homogenous housing estates in Erbil City precisely apartments have been selected with different plans and building layouts for their widespread use in the city and have been occupied during the three stages of study to go beyond investigating direct impact of the pandemic towards permanence of alterations and adaptation even after pandemic. Rea-sons causing changed dissatisfaction levels have been investigated for better reliability towards formulating final conclusions and recommendations. Findings showed in-creased dissatisfaction during pandemic in most of spaces, apartment layout and space design significantly affected responses and demands. Levels of dissatisfaction after pan-demic were different from stability to slight decline in dissatisfaction. The effect of limited external spaces in apartments had limited the possibility to manage the pressure, a case that might be less demanding in single family housing due to availability of private gar-dens.

The solid-state technique was utilized to make a single phase of delafossite CuAlO2, along with 1%, 2%, 3% and 4% silver doped CuAlO2 samples in this study. The content of the samples was investigated using energy dispersive X-ray spectroscopy (EDS) equipped with a field emission scanning electron microscope (FE-SEM). The polycrystalline nature of all of the analyzed cases was confirmed by structural analyses utilizing an X-ray diffraction (XRD) pattern with a simple typical peak of CAO rhombohedral phase. Raman, FT-IR and UV–Vis spectroscopy were used to study the structural, and optical energy band gap (Eg) of Ag doped CuAlO2 nanoparticles. The Kubelka–Munk function was used to calculate the optical band gap of ACAO alloys using diffuse reflectance spectra, and it altered as the Ag ion concentration increased. A. c. impedance spectroscopy was used to investigate the dielectric characteristics of Ag doped CuAlO2 nanoparticles.

Growing evidence suggests a possible involvement of the intestinal microbiota in generating new neurons, but a detailed breakdown of the microbiota composition is lacking. In this report, we systematically reviewed preclinical rodent reports addressing the connection between the composition of the intestinal microbiota and neurogenesis and neurogenesis-affecting neurotrophins in the hippocampus. Various changes in bacterial composition from low taxonomic resolution at the phylum level to high taxonomic resolution at the species level were identified. As for neurogenesis, studies predominantly used doublecortin (DCX) as a marker of newly formed neurons or bromodeoxyuridine (BrdU) as a marker of proliferation. Brain-derived neurotrophic factor (BDNF) was the only neurotrophin found researched in relation to the intestinal microbiota. Phylum Actinobacteria, genus Bifidobacterium and genus Lactobacillus found the strongest positive while phylum Firmicutes, phylum Bacteroidetes and family Enterobacteriaceae as well as germ-free status, showed the strongest negative correlation towards neurogenesis or BDNF mRNA expression. Age, short-chain fatty acids (SCFA), obesity and chronic stress were recurring topics in all studies identified. Overall, these findings add to the existing evidence of a connection between microbiota and processes in the brain. To better understand this interaction, further investigation based on analyses of higher taxonomic resolution and clinical studies would be a gain to the matter.

Higher order femtoscopy measured to examine the heat exchanger characterization of the fluid debris produced in the collisions and investigated a remarkable suppression in the bosons interferences measurement. The analogous suppression can be analyzed to explore the coherence of boson thermal particle production sources at unprecedented energies. We illustrate the particles emissions from radiated sources with statistical coherence which induce the thermal particles interferences to probe the peculiarity of the heated sources as well as the distinctions about the heat exchangers in the collisions at higher temperature. We perspicacious that the bosons seem to the pertinent aspirant of heat exchanger, and the normalized three particles correlators evaluate the existence of such hybrid phases significantly. The key point of this research is that we analyze the three particles correlations with their normalized correlations by difference equations to determine the characteristics of heat exchanger and its applications. With such distinctive and efficient approach, we observe a significant difference in the correlation functions at higher temperature and momenta regimes.

Recent advancement of deep learning has been elevated the multifaceted nature in various applications of this field. Artificial neural networks are now turning into a genuinely old procedure in the vast area of computer science; the principal thoughts and models are more than fifty years of age. However, in this modern computing era, 3rd generation intelligent models are introduced by scientists. In the biological neuron, actual film channels control the progression of particles over the layer by opening and shutting in light of voltage changes because of inborn current flows and remotely led to signals. A comprehensive 3rd generation, Spiking Neural Network (SNN) is diminishing the distance between deep learning, machine learning, and neuroscience in a biologically-inspired manner. It also connects neuroscience and machine learning to establish high-level efficient computing. Spiking Neural Networks initiate utilizing spikes, which are discrete functions that happen at focuses as expected, as opposed to constant values. This paper is a review of the biological-inspired spiking neural network and its applications in different areas. The author aims to present a brief introduction to SNN, which incorporates the mathematical structure, applications, and implementation of SNN. This paper also represents an overview of machine learning, deep learning, and reinforcement learning. This review paper can help advanced artificial intelligence researchers to get a compact brief intuition of spiking neural networks.

Cyanobacterial mass developments in eutrophic ponds and lakes are a major concern for lake management, as many cyanobacteria produce a huge variety of toxic secondary metabolites, e.g. microcystins. The aim of this research was to culture a strain of the cyanobacterium Microcystis sp strain BM25, to observe its biomass production and to isolate and purify protease inhibitors from this cyanobacterial biomass. Different secondary metabolites were isolated following a standard bioassay-guideline. Isolation was performed, with an enzymatic protease assay as bioassay. High performance liquid chromatography was used to identify different fractions of secondary metabolite from the strain BM25. Moreover, protease homogenates were isolated from Daphnia magna in order to test the inhibitors against naturally occurring major digestive proteases trypsin and chymotrypsin. It was measured that 60% MeOH and the 80% MeOH C18-SPE fraction inhibits chymotrypsin activity 98% (6 nmol pNA min^-1 mg^-1) and 99 % (4 nmol pNA min^-1 mg^-1), respectively. In contrast, trypsin activity was not inhibited by methanolic extracts of this cyanobacterium strain.

Thalassemia is genetic blood disease cause by absence or decrease of one or more of the globin chain synthesis. Beta thalassemia is characterized by one or more mutations in beta globin gene. Absence or reduced amount the of beta globin chains cause ineffective erythropoiesis which leads to anemia. Beta thalassemia has been further divided into three main forms: Thalassemia minor/silent carrier, major and intermedia. More severe form is thalassemia major in which patients depend upon blood transfusion for survival and high level of iron occur as a consequence of consistent blood transfusion. Over loaded iron invokes the synthesis of reactive oxygen species that are toxic in redundancy and triggering the impairment to vascular, endocrine and hepatic system. Thalassemia can be diagnosed and detected through various laboratory tests such as blood smear, prenatal testing (genetic testing of amniotic fluid), DNA analysis (genetic testing) and complete blood count. Treatment of thalassemia intermedia is symptomatic but it can also be managed by splenectomy and folic supplementation. While thalassemia major can be treated by transplantation of bone marrow, regular transfusion of blood and iron chelation treatment, stimulation of fetal hemoglobin production, hematopoietic stem cell transplantation and gene therapy.

This article explores matter collineations (MCs) of static plane-symmetric spacetimes, considering the stress-energy tensor in its contravariant and mixed forms. We solve the MC equations in two cases: when the energy-momentum tensor is nondegenerate and degenerate. For the case of degenerate energy-momentum tensor, we employ a direct integration technique to solve the MC equations, which leads to an infinite-dimensional Lie algebra. On the other hand, when considering the nondegenerate energy-momentum tensor, the contravariant form results in a finite-dimensional Lie algebra with dimensions of either 4 or 10. However, in the case of the mixed form of the energy-momentum tensor, the dimension of the Lie algebra is infinite. Moreover, the obtained MCs are compared with those already found for covariant stress-energy.

Many countries have been facing the problem of bank insolvency across the globe. Asset deterioration is one of the main reasons for insolvency of banks. The objective of the paper is to ascertain the determinants of nonperforming loans (NPLs) in the banking sector of Pakistan for the period 2006-16. Other than the bank specific and macro variables proposed by the literature, the roles of weighted maturity and output gap are for the first time examined. We find significant impact of output gap on NPLs however weighted maturity has insignificant role in shaping the future NPLs. Bank specific drivers of NPLs include bank size and capital adequacy ratio.

The latest research cumulates staggering information about the correlation between the microbiota-gut-brain axis and neurodevelopmental disorders. This review aims to shed light on the potential influence of the microbiome on the development of the most prevalent neurodevelopmental disease, attention-deficit-hyperactive disorder (ADHD). As the etiology and pathophysiology of ADHD are still unclear, finding viable biomarkers and effective treatment still represent a challenge. Therefore, we focused on factors that have been associated with a higher risk of developing ADHD while simultaneously influencing the microbial composition. We reviewed the effect of a differing microbial composition on neurotransmitter concentrations important in the pathophysiology of ADHD. Additionally, we deduced factors that correlate with a high prevalence of ADHD while simultaneously affecting the gut microbiome such as emergency c-sections, and premature birth as the former leads to a decrease of the gut microbial diversity and the latter causes neuroprotective Lactobacillus levels to be reduced. Also, we assessed nutritional influences such as breastfeeding, ingestion of short-chain fatty acids (SCFAs) and polyunsaturated fatty acids (PUFAs) on the host’s microbiome and development of ADHD. Finally, we discussed the potential significance of Bifidobacterium as a biomarker for ADHD, the importance of preventing premature birth as prophylaxis and nutrition as a prospective therapeutic measurement against ADHD.

Crossbreeding in dairy cattle with exotic breeds continues to be an appealing practice to the dairy farmers of Bangladesh. However, there is limited knowledge regarding the impact of crossbreeding on both the physical attributes and milk quality traits of crossbred cattle in Bangladesh. Therefore, the primary objective of this study was to evaluate the impact of crossbreeding Bangladeshi local cattle with the exotic Holstein breed on their body characteristics and milk quality. To achieve the goal, data pertaining to body traits and milk samples were gathered from a total of 981 cows from 19 dairy farms located in the northwestern region of Bangladesh. A trained evaluator measured body condition score (BCS), udder score, locomotion score, and body conformation traits. Milk yield information was acquired from official records, while milk composition details were determined through milk analysis. The average measurements for body traits were as follows: wither height (WH) at 138 cm, body length (BL) at 155 cm, and heart girth (HG) at 203 cm. Notably, crossbred cows (Holstein x Local cattle) exhibited greater values for WH, BL, HG, BCS, and udder score than their Bangladeshi local counterparts. Furthermore, the average daily milk yield of sampled cows was recorded at 8.7 kg, with fat and protein contents of 3.78% and 3.67%, respectively. It is worth noting that crossbred cows produced a higher volume of milk compared to Bangladeshi local cattle. However, milk from crossbred cows displayed lower fat and protein content, although their somatic cell score (SCS) remained similar. Additionally, milk from crossbred cows exhibited a longer coagulation time when compared to that of Bangladeshi local cattle. A more comprehensive assessment of the crossbreeding scheme, particularly in comparison to Holstein, would necessitate further research, including an examination of its impact on cheese yield traits, health, fertility, and longevity.

Inflammation and insulin resistance are recognized as central features in the pathology of psoriasis, profoundly affecting the lives of those affected by this condition. The relationship between lifestyle choices and psoriasis is well-documented, highlighting the potential benefits of dietary modifications and physical activity in managing the condition during exacerbations. Furthermore, growing evidence emphasizes the significant impact of nutritional interventions on various skin disorders, particularly those characterized by inflammation and insulin dysregulation. Notably, the role of dietary fats is of particular interest, with their influence on inflammation and insulin resistance in psoriasis garnering increasing attention. Moreover, the association between excessive adiposity and heightened psoriatic severity underscores the importance of weight management strategies in disease management. This review explores the intricate relationship between specific dietary fats and inflammation in psoriasis, offering a comprehensive analysis of their implications for disease progression and management.

The fuel cell particularly the Proton Exchange Membrane Fuel Cell (PEMFC) is a new energy technology that plays a critical role in achieving market viability. The PEMFC has high power density, zero CO₂ emissions, and high conversion efficiency. However, with uniform distribution of fuel in PEMFC, we can improve the performance and reduce the cost. The PEMFC will be more efficient and effective in terms of renewable energy as a byproduct only water. Metal foam is used as an alternative for the channels in PEMFC. The model of PEMFC was established by using the ANSYS Fluent 3D Model. Then we proposed four configurations of PEMFC. The outcome demonstrates that Case IV provided outstanding performance if it is compared with the other three cases. In terms of power density, Case IV provided a high power density that is double that of Case I. The porosity of metal foam was investigated. The 0.6 porosity value is found as the optimal value. The uniform distribution of the fuel can be achieved at this value which leads to the outstanding current density.

This study investigated riverbank protection strategies along the dynamic Jamuna River in Bangladesh, a braided river prone to erosion and sedimentation. It reviews past countermeasures and emphasizes the effectiveness of groyne-type structures in redirecting flow and preventing erosion. Notably, the left bank exhibited greater stability than the right bank, emphasizing the need for effective groyne installations. A systematic methodology utilizing numerical modeling using International River Interface Cooperation (iRIC Nays2DH) ensured accuracy in assessing morphological impacts. This study presents novel countermeasures incorporating groyne installations in Zone 1 (from Singrabari to Meghai) and Zone 2 (from Pachthakuri to Subhagacga), accompanied by simulations for various flood conditions. Zone 2, identified as highly erosion-vulnerable, showed the greatest susceptibility. Simulations (Cases_0 1, 2, and 3) revealed groynes in Zone 1 alone ineffective, while Zone 2 installations successfully diverted oblique flow, reducing erosion risk. Although Case_3's combined approach was effective, it was uneconomical for Zone 1. Case_2, focusing on Zone 2 groynes, emerged as the optimal solution, redirecting flow and shaping sandbars to mitigate Jamuna River's riverbank erosion. It provides a practical and economical solution. Further research is recommended for groyne length and spacing variations. This study enhances Jamuna River protection, emphasizing groyne-type structures' importance and promoting a holistic understanding of morphological dynamics for future river management and effective countermeasures.

Medicinal plants possess a surplus of novel and biologically active secondary metabolites that are responsible for counteracting diseases. Traditionally, Gomphandra tetrandra (Wall.) Sleumer is used to treat mental disorders. The present research was designed to explore phytochemicals from the ethanol leaf extract of Gomphandra tetrandra (Wall.) Sleumer to identify the potential pharmacophore(s) in the treatment of neurological disorders. The chemical compounds of the experimental plant were identified through GC-MS analysis. Besides, in-vitro antioxidant activity was assessed using different methods. Furthermore, in-vivo neurological activity was assessed in Swiss-albino mice. Computer aided analysis was appraised to determine the best-fit phytoconstituent of a total of fifteen identified compounds in the experimental plant extract against beta-amyloid precursor protein. The experimental extract revealed fifteen compounds in GC-MS analysis and the highest content was 9, 12, 15-octadecatrienoic acid (Z, Z, Z). Also, the extract showed potent anti-oxidant activity in in-vitro assays. Furthermore, in in-vivo neurological assays, the extract disclosed significant (p<0.05) neurological activity. The most favorable phytochemicals as neurological agents were selected via ADMET profiling and molecular docking was studied with beta-amyloid precursor protein. Moreover, in the computer aided study, 1, 5-Diphenyl-2H-1, 2, 4-triazoline-3-thione (Pub Chem CID: 2802516) was more active than other identified compounds with strong binding affinity to beta-amyloid precursor protein. The present in vivo and in silico studies revealed neuropharmacological features of G. tetrandra leaves extract as a natural agent against neurological disorders, especially Alzheimer’s disease.

This study examines stress distributions in adhesive joints under various loading and temperature conditions. Finite element analysis (FEA) was employed to compute the peel and shear stresses at the adhesive interface and bondline midpoint. The analytical solutions proposed by Goland and Reissner were analyzed with modifications by Hart-Smith and Zhao. FEA revealed stress distributions at the adhesive/adherend interface and bondline midpoint. DP490 adhesive joints exhibited lower stresses than EA9696 due to a lower Young's modulus and the use of thicker adherends. Temperature variations significantly affected joint behavior, particularly above the adhesive’s glass transition temperature (Tg). Both EA9696 and DP490 adhesive joints displayed distinct responses to stress and temperature changes. The comparison between parabolic and biquadratic solutions for functionally graded adhesive (FGA) joints showed that the biquadratic solution consistently yielded higher shear and peel stress values, with an increase ranging from 15% to 71% compared to the parabolic solution at various temperatures. Comparing stress distributions between peel and shear stresses, emphasizing the importance of selecting adhesives based on stress type, temperature, and solution methods in optimizing adhesive bonding applications. These findings provide valuable insights for thermomechanical applications where thermal stimuli may be used for controlled debonding.

Trypanosomes are the extracellular protozoan parasites that cause human African trypanosomiasis disease in humans and nagana disease in animals. The disease is endemic in African countries where tsetse flies which act as a vector for the transmission of disease are present. The animals infected by these parasites become useless or workless and disease can become fatal if not treated. Old drugs used for treatment have many side effects and some are responsible for death in 5% of the patients. The parasite possesses a major surface protein known as variant surface glycoprotein. The immune system of the host develops antibodies against this antigen but due to antigenic variation, parasites evade the immune response. Currently, no vaccine is available that provides complete protection. Only partial protection using certain antigens in murine models was investigated. The tools of molecular biology and immunology have enabled a novel approach to the development of vaccines against trypanosomes. Immunization is the sole method for the control of disease because the eradication of the vector from endemic areas is an impossible task. Genetic vaccines can carry multiple genes encoding different antigens of the same parasite or different parasites. DNA immunization induces the activation of both cellular immune response and humoral immune response along with the generation of memory. This review highlights the importance of DNA vaccines and advances in the development of DNA vaccines against T. brucei.

For bounded unit interval, we propose a new Kumaraswamy generalized (G) family of distributions from a new generator which could be an alternate to the Kumaraswamy-G family proposed earlier by Cordeiro and de-Castro in 2011. This new generator can also be used to develop alternate G-classes such as beta-G, McDonald-G, Topp-Leone-G, Marshall-Olkin-G and Transmuted-G for bounded unit interval. Some mathematical properties of this new family are obtained and maximum likelihood method is used for estimating the family parameters. We investigate the properties of one special model called a new Kumaraswamy-Weibull (NKwW) distribution. Parameter estimation is dealt and maximum likelihood estimators are assessed through simulation study. Two real life data sets are analyzed to illustrate the importance and flexibility of this distribution. In fact, this model outperforms some generalized Weibull models such as the Kumaraswamy-Weibull, McDonald-Weibull, beta-Weibull, exponentiated-generalized Weibull, gamma-Weibull, odd log-logistic-Weibull, Marshall-Olkin-Weibull, transmuted-Weibull, exponentiated-Weibull and Weibull distributions when applied to these data sets. The bivariate extension of the family is proposed and the estimation of parameters is given. The usefulness of the bivariate NKwW model is illustrated empirically by means of a real-life data set.

Around the world, there is no population clear from urinary tract infection (UTI), particularly among women. UTI is considered the most predominant bacterial infection. This study aimed to detect the incidence of the most common major uropathogens in patients severe from urinary tract infection with antibiotic sensitivity tests that assist urologist doctors for appropriate antimicrobial empirical therapy.Methods: This study was carried in a private laboratory in Babil city, Iraq from May 2019 to May 2020. Totally 70 individuals suffering from clear symptoms of UTI, as well as, 20 healthy persons participated in this study as a control group. Then, the standard microbiological methods carried out to isolate and identify bacterial species. Antimicrobial susceptibility tests were performed using different antimicrobial discs by applying the Kirby–Bauer disc diffusion method.Results: Totally, 90 specimens were obtained from them 20 control group, 19 with no growth, and 51 patients with bacterial growth distributed as 43 (83%) females and 8 (17%) males. E. coli were the most common predominant organisms. All isolates were showed a high rate of resistance to evaluated cephalosporins 100% and 82% to cefotaxime and ceftriaxone respectively, while very low resistance recorded in Aminoglycosides 20% and 13% to Gentamicin and amikacin respectively. Most age group infected with UTI was 21-40 years old.Conclusion: The current study showed an increasing burden of urinary tract infection caused by various bacteria implicated in UTI that causes changeable sensitivity to various antimicrobial agents. Therefore, in clinical use appropriate medications should be selected based on the data obtained from antimicrobial susceptibility tests.

Scarcity of water is one of the most serious concerns in plant biology with diverse implications at all the levels of molecular, biochemical, and physiological phenomena of plant growth, development, and consequently the productivity. Most of the strategies to induce or enhance drought tolerance in plants are unreasonably expensive and/or time-consuming. Some studies conducted in the recent past have shown that plant growth regulators (PGRs) may induce/improve physiological tolerance in plants to cope with adverse environmental conditions including drought. The present study was aimed at investigating the effects of foliar spray of GABA (0, 1, 2, and 4 mM) applied 20 days following the germination of seeds, on vegetative growth, morphological characteristics, integrity of cell-membrane, and the levels of photosynthetic pigments and enzymatic antioxidants in carrot cvs. Supertaj and Bharat, grown under 100% and 50% field capacity of soil moisture. The treated and untreated (control) carrot plants were harvested and analyzed 2 weeks following the GABA application. The results revealed that foliar application of GABA improved the vegetative growth and significantly increased the levels of free amino acids, plastid pigments, enzymatic antioxidants, and the relative water content in the root crop grown under 50% field capacity of soil moisture, compared to control. Additionally, the GABA application decreased the electrolyte leakage of ions and melondialdehyde (MDA) content in carrot leaves. The carrots harvested from GABA-treated or untreated (control) plants were not significantly different for their protein contents. In conclusion, the incorporation of GABA in the production management of carrots may help plants to mitigate the adverse effects of water deficit stress.

Different drought indices are used to quantify its characteristics. This research applied many approaches to assessing the uncertain SPI and SPEI and the most capturing index of drought. Machine learning algorithms are used to predict drought; TBATS and ARIMA models run diverse input sources including observations, CSIC, and CMIP6-ssp126 datasets. The longest drought duration was 14 months. Drought severity and average intensity were found -24.64 and -1.76, -23.80 and -1.83, -23.57 and -1.96, -23.44 and -2.0 where the corresponding drought categories were SPI 12 -Sweileh, SPI 9 Sweileh, SPI 12 Wadi Dhullail, SPI 12 Amman-Airport. The dominant drought incident occurred between Oct 2020 and Dec 2021. CMIP6 can capture the drought occurrence and severity by measuring SPI but did not capture the severity magnitude same as from observations (-2.87 by observation and -1.77 by CMIP6). Using observed SPI and historical CMIP6, ARIMA was the most accurate than TBATS. Regarding SPEI forecast, ARIMA was the most accurate model to forecast drought index using the observed historical SPEI and CSIC over all stations. The performance metrics ME, RMSE, MAE, and MASE implied significantly promising forecasting models; -0.0046, 0.278, 0.179, &amp; 0.193 respectively for ARIMA and -0.0181, 0.538, 0.416, &amp; 0.466 respectively for TBATS. Hybrid modelling is suggested for more consistency and robustness of forecasting approaches.

Background: Valid questionnaires to assess dogs’ health-related quality of life (HRQoL) in veterinary practice can improve canine health outcomes and communications between veterinarians and dog caretakers. The Canine HRQoL Questionnaire (HRQoL-Q) and the Human-Canine Bond Questionnaire (HCBQ) were developed and validated to fulfill this need. Methods: A literature review, interviews with veterinarians, and focus groups with caretakers were conducted to generate questionnaire items to develop draft questionnaires, piloted with caretakers to establish content validity. Measurement properties were evaluated using data from a prospective survey study (N = 327). Results: Draft Canine HRQoL-Q and HCBQ measures were developed, including a domain structure, items, recall period, and scale/response options. Refinements were made via iterative cognitive interviews with caretakers. When no additional revisions were indicated and content validity established, the questionnaires were psychometrically tested. Ceiling effects were observed for all items, and factor analyses indicated that pre-specified domains are appropriate. Internal consistency was demonstrated for the HCBQ (α = 0.79–0.86) and all but the canine HRQoL-Q social functioning domain (α = 0.60)). Test-retest reliability for the canine HRQoL-Q was generally moderate-to-good (intraclass correlation coefficients [ICCs] &gt; 0.79). Test-retest reliability for the HCBQ was moderate (ICCs: 0.70–0.79), except the trust domain (ICC: 0.58). Known-groups validity was demonstrated by significant differences (p &lt; 0.05) in scores by health/bonding groups. Convergent validity was supported (r &gt; 0.40) between all domains and the total score for both questionnaires. Conclusions: The Canine HRQoL-Q and the HCBQ are valid, reliable measures of canine HRQoL for use in veterinary clinics and appear to measure related but distinct concepts that contribute to canine health and wellness.

In the pathogenesis of endometriosis, the differences between the eutopic and ectopic endometrium as well as between the eutopic endometrium with and without endometriosis are repeatedly pointed out. Various mechanisms have been suggested to explain these changes among them epithelial-mesenchymal transition (EMT). Recently, we suggested based on immunohistochemical data that most of the changes occur after and not before implantation of endometrial cells into ectopic locations. Furthermore, the subtle changes between eutopic endometrium with and without endometriosis and maintenance of epithelial cell-to cell contacts only suggest a partial EMT. In this study, we have re-analyzed the mRNA expression array data of eutopic and ectopic endometrium with respect to expression changes and EMT. Especially, we found that the similarity between eutopic endometrium with and without endometriosis is extremely high (~99.1%). In contrast, eutopic endometrium compared to ectopic endometrium only shows an overall similarity of ~95.3%. Analysis of some EMT-associated genes revealed small differences in the mRNA expression levels of some members of the claudin family. The array data suggest that the changes in eutopic endometrium at the beginning of the disease are quite subtle and that the majority of differences occur after implantation into ectopic locations.

A new class of tetrasubstituted imidazole based compounds was synthesized using a multicomponent one-pot synthesis scheme through a cyclo condensation reaction of benzil, aromatic primary amines, aldehydes and ammonium acetate in glacial acetic acid. The synthesized compounds have been analyzed and characterized by melting point, color, conductivity method, CHN analysis, FT-IR, and UV-Visible. The reaction proceeding was examined by TLC after regular intervals of period. To test biological activity, the synthesized compounds have been examined against various bacterial strains. From the analysis of the antibacterial activity of these synthesized compounds demonstrated that all three imidazole compounds have considerable to significant activity against the strains, and compound K2 was found potent comparatively.

Transient liquid phase (TLP) bonding of Al-6063 and UNS S32304 was performed using copper foil as an interlayer between the base metals. A compression load was applied normal to the specimens. Metallurgical examination of the produced joints showed three distinct regions including a reaction zone, diffusion affected zone and the base metals. The diffusion of copper into aluminum resulted in an Al-Cu eutectic structure. However, the oxide layer on the aluminum surface controlled the dissolution behavior of copper and the extent of its wettability with the base metals. Although voids and intermetallic compounds were detected at the interfaces of the processed joints, a defect free joint was produced at 570°C. In addition, the results from corrosion tests showed that the use of copper as an interlayer decreased the corrosion resistance of the joints. However, increase in thickness of the joining reaction zone with increasing bonding temperature was observed to increase corrosion resistance.

Effective pandemic management requires understanding the level of community knowledge, attitude of people and preparedness towards COVID-19. This study aimed to assess the knowledge, attitude and preparedness toward COVID-2019 among Bangladeshi general people. A cross sectional survey was conducted from 20th March 2020 to 20th April 2020 among 1007 Bangladeshi adult people. A convenience sampling strategy was utilized and the data was collected through a self-administered questionnaire. Chi-square test was used to identify the gender differences regarding knowledge, attitude and preparedness towards COVID-19. Respondents predominately used social media to inform themselves about COVID-19 (68.10%) and female used social media more than male (p<0.001). Female had more correct knowledge about staying home with sickness and/or symptoms to contain the COVID-19 transmission (p=.02). While male had more negative attitude about staying out during the pandemic than female (<0.001) and men were less likely to take preventative measures than female counterparts. A number of people were still believing the myths like “COVID-19 can transmit via mosquito” (9.14%) and male had more incorrect knowledge regarding this (p<0.001). Moreover, 17.81% of the respondents thought that COVID-19 can spread in warm weather. Some findings are directing us to a knowledge gap among general population in Bangladesh which calls for uncovering those aspects. Adequate and effective communication are necessary so that general people can stay alert with positive attitude and hygienic practices to fight against this ongoing crisis.

Contemporary financial systems, despite their inherent complexity and resilience, face significant challenges related to transparency, efficiency, and security. Notable deficiencies in transparency and emerging security vulnerabilities underscore the pressing need for innovative solutions in current financial practices. Hence, this paper introduces a financial distribution system based on a consortium blockchain. Given organizations’ preference for keeping sensitive data private, the partially decentralized nature of consortium blockchains plays a pivotal role in the proposed system’s architecture. Moreover, within this system, the proposed smart contract serves a dual role. It functions not only as a transactional tool but also as a specialized solution designed to improve transactional procedures. Its multifaceted capabilities include ensuring data accuracy, facilitating swift execution, and ensuring adherence to regulatory requirements within the dynamic financial distribution landscape. Through rigorous testing and empirical analysis utilizing the Hyperledger Besu platform, it has been observed that the performance of the proposed system surpasses traditional blockchain frameworks. The results unequivocally demonstrate the proposed system’s proficiency in handling high-frequency financial transactions with minimal computational burden.

Quinine and its less toxic derivatives have served humanity for decades as potent antimalarial drugs. Emergence of drug resistance has narrowed the usage of these drugs in malaria prevention and treatment. Fortunately, these drugs have roles in the treatment of other diseases as well including rheumatic disorders and viral infections. Quinine derivatives have proven antiviral effects, especially against human immunodeficiency virus (HIV), Zika virus (ZiKV), herpes simplex virus (HSV), Ebola virus and dengue virus (DENV). The prophylactic and therapeutic role of Chloroquine/hydroxychroquine has become a topic of interest after the recent outbreak of novel Corona virus-19 (nCoV-19). This virus is also named severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) and WHO has officially named this disease as Corona virus disease 2019 (COVID-19). This lethal virus has affected almost 186 countries of the world till to date just in a period of four months of its outbreak. No approved antiviral drug is existed for the treatment of COVID-19. Therefore, this review is focused on potential prophylactic and therapeutic role of chloroquine/hydroxychlroquine for COVID-19.

This research assesses the changes in the total water storage (TWS) during the twentieth century and their future projections in the Nile River Basin (NRB) via TWSA (TWS anomalies) records from GRACE (Gravity Recovery and Climate Experiment), GRACE-FO (Follow-On), data-driven-reanalysis TWSA and land surface model (LSM), in association with precipitation, temperature records, and standard drought indicators. The analytical approach incorporates the development of 100+ yearlong TWSA records using a probabilistic conditional distribution fitting approach by the GAMLSS (Generalized Additive Model for Location, Scale, and Shape) model. The drought and flooding severity, duration, magnitude, frequencies, and recurrence were assessed during the studied period. The results showed, 1- The NRB between 2002 to 2020 has transited to substantial wetter conditions. 2- The TWSA reanalysis records between 1901 to 2002 revealed that the NRB had experienced a positive increase in TWS during the wet and dry seasons. 3- The projected TWSA between 2021 to 2050 indicated slight positive changes in TWSA during the rainy seasons. The analysis of drought and flooding frequencies between 1901 to 2050 indicated the NRB has ~64 dry-years compared to ~86 wet-years. The 100+ yearlong TWSA records assured that the NRB transited to wetter conditions relative to few dry spells. These TWSA trajectories call for further water resources planning in the region especially during flood seasons. This research contributes to the ongoing efforts to improve the TWSA assessment and its associated dynamics for transboundary river basins. It also demonstrates how an extended TWSA record provides unique insights for water resources management in the NRB and similar regions.

The objective of this research is to analyze the effect of determinants of Business ethics (HR management ethics, ethics in corporate governance, and ethics in sales & marketing) on the organizational performance of the high-tech industry. The study further examines the influence of multiple serial mediations of human, structural, structural, and relational capital on the connection between Business ethics and organizational performance. Additionally, this research examines how technological change moderates the relationship between Business ethics and organizational performance. Data was collected from the information technology sector in various cities of South Asian countries through structured questionnaires. PLS-SEM modeling was used via Smart-PLS 4.0 software for analysis. The hypothesized & modified measurement and structural model were validated using the HTMT matrix, Fornell-Larcker criterion, R-square values, f-square values, outer loading, construct reliability and validity, path coefficient analysis, Blindfolding, and predictive relevance. The research results suggest that ethics in corporate governance, HR management ethics, and ethics in sales & marketing have a notable positive effect on business ethics, leading to a substantial and affirmative impact on the organizational performance of the high-tech industry. The findings further suggested that dimensions of intellectual capital (human capital, structural capital & relational capital) significantly moderate between exogenous and endogenous constructs. Moreover, technological change significantly & positively moderates the relationship between Business ethics and organizational performance of the high-tech industry. In conclusion, this research provides insights into how these variables interact and what potential mechanisms act upon them. Organizations can make informed decisions about improving their performance and ethical standards by understanding these relationships. This research offers substantial theoretical and managerial implications to research scholars and industry practitioners.

This communication reports an improvement of the quality of the electrical data obtained from the application of electrical resistivity tomography method on archaeological studies. The electrical contact between ground and electrode enhances significantly by using carbomer-based gel during the electrical resistivity tomography measurements. Not only does the gel promote the conservation of the building surface under investigation, but it also virtually eliminates the necessity of conventional spike electrodes, which in many archaeological studies are inadequate or not permitted. Results evidenced an enhancement in the quality of the electrical data obtained in the order of thousands of units compared with those without using the carbomer-based gel. The potential and capabilities of this affordable gel make it appropriate to be applied to other geoelectrical studies beyond archaeological investigations. Moreover, it might solve corrosion issues on conventional spike electrodes, and electrical multicore cables usually provoked for added saltwater attempting to improve the electrical contact.

Malaysia is a developing country and agro-industries contribute country’s economy. However, it is largely unknown the scenarios of agricultural practice and food supply over the years. To understand the fact, this study was designed to explore the agricultural land use changes and domestic food supply for last 50 years in Malaysia. The result showed that oil palm plantation area and yield, both are increased by folds, conforming “oil palm” mono-culture practice. Rice cultivation area remained almost unchanged but the yield increased. However, both area of plantation and yield in case of rubber, coca and coconut were decreased. When, it comes to domestic food supply, in 1973 food grain (Rice, Wheat, Maize) import was lower than domestic production. However, the import increased more than 3 times than the domestic production in 2013. Domestic production of vegetables and vegetables import was almost 50:50. Fruits import increased almost 3 times of domestic production, though domestic production was increased. In conclusion, it is understood that Malaysian agriculture economy is standing on “oil palm” wearers domestic food supply is import dependent. It is high time to reshuffle the policy for sustainable development and achieving food sovereignty.

The sustainability of the planet and its inhabitants is in dire danger and is among the highest priorities on global agendas such as the Sustainable Development Goals (SDGs) of the United Nations (UN). Solar energy -- among other clean, renewable, and sustainable energies -- is seen as essential for environmental, social, and economic sustainability. Predicting solar energy accurately is critical to increasing reliability and stability, and reducing the risks and costs of the energy systems and markets. Researchers have come a long way in developing cutting-edge solar energy forecasting methods. However, these methods are far from optimal in terms of their accuracies, generalizability, benchmarking, and other requirements. Particularly, no single method performs well across all climates and weathers due to the large variations in meteorological data. This paper proposes SENERGY (an acronym for Sustainable Energy), a novel deep learning-based auto-selective approach and tool that, instead of generalising a specific model for all climates, predicts the best performing deep learning model for GHI forecasting in terms of forecasting error. The approach is based on carefully devised deep learning methods and feature sets through an extensive analysis of deep learning forecasting and classification methods using ten meteorological datasets from three continents. We analyse the tool in great detail through a range of metrics and methods for performance analysis, visualization, and comparison of solar forecasting methods. SENERGY outperforms existing methods in all performance metrics including Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), Forecast Skills (FS), Relative Forecasting Error, and the normalised versions of these metrics. The proposed auto-selective approach can be extended to other research problems such as wind energy forecasting and predict forecasting models based on different criteria (in addition to the minimum forecasting error used in this paper) such as the energy required or speed of model execution, different input features, different optimisations of the same models, or other user preferences.

Allama Iqbal Open University (AIOU) is the largest distance learning institute of Pakistan and providing education to 1.4 million students. This is fairly a large setup across the country where students are geographically distributed. Currently the system works on a manual approach which is not efficient. Allocation of tutors and study centers to students plays a key role in distance learning for a better learning environment. Assigning tutors and study centers to distance learning students is a challenging task when there is huge geographical spread. The utilization of geospatial technologies in open and distance learning can fix allocation problems. This research analyzes the real data of twin cities Islamabad and Rawalpindi. The results show that the geospatial technologies can be used for efficient and proper resource utilization and allocation, which in turn can save the time and money. The overall idea fits into improved distance learning framework and related analytics.

This research aims to explore the adoption and impact of green supply chain practices (GSCP) on sustainable development in Bangladesh. The study seeks to understand the current state of GSCP adoption across various industries, identify key drivers and barriers, assess the perceived benefits and challenges, and evaluate the overall impact on environmental sustainability, economic performance, and social well-being. The research employs a qualitative approach, utilizing interviews with key stakeholders, document analysis, and literature review to gather data and insights. Interviews were conducted with representatives from government agencies, businesses, civil society organizations, and academia to obtain diverse perspectives on GSCP adoption and its implications for sustainable development in Bangladesh. The findings reveal a mixed scenario of GSCP adoption across different industries in Bangladesh, with sectors such as textiles leading the way. Key drivers of GSCP adoption include regulatory pressures, market forces, corporate social responsibility initiatives, and financial incentives. However, organizations face significant barriers such as high upfront costs, lack of awareness and expertise, regulatory uncertainty, and supply chain complexity. Despite these challenges, GSCP offer various benefits, including environmental sustainability, economic performance, and social well-being. Successful initiatives demonstrate tangible impacts, highlighting the potential of GSCP to contribute to sustainable development. The research is limited by its qualitative nature and focus on selected industries and stakeholders. Future studies could employ quantitative methods and broader sampling to provide a more comprehensive understanding of GSCP adoption and its implications in Bangladesh. The findings provide actionable insights for policymakers, industry leaders, and other stakeholders to promote GSCP adoption and enhance sustainable development in Bangladesh. Strategies for overcoming barriers and maximizing benefits are outlined, emphasizing the importance of collaboration and capacity-building initiatives. GSCP adoption can have positive social implications by promoting ethical labor practices, improving working conditions, and fostering community engagement. By prioritizing sustainability, businesses can contribute to social well-being and inclusive growth. This research contributes to the literature on GSCP adoption and sustainable development in Bangladesh by providing empirical insights and practical recommendations. The study adds to the understanding of the drivers, barriers, benefits, and challenges associated with GSCP adoption, highlighting the importance of integrating environmental, economic, and social considerations in supply chain management.

This article will briefly review the progress of h-BN based solid-state metal semiconductor metal (MSM) neutron detectors. In the last decade, several groups have been working on hexagonal boron nitride (h-BN) based solid-state neutron detectors. Recently, the detection efficiency of 59% has been reported. Efficient, low-cost neutron detectors made from readily available materials are essential for various applications. Neutron detectors are widely used to detect fissile materials and nuclear power plants for security applications. The most common and widely used neutron detectors are 3He based, which are sometimes bulky, difficult to transport, have high absorption length, need relatively high bias voltage (>1000 V), and have low Q-value (0.764 MeV). Also, 3He is not readily available material. Thus, there is a strong need to find an alternative detection material. 10B isotope has a high neutron absorption cross-section, and it has been tested as a coating on the semiconducting materials. Due to the two-step process, neutron capture through 10B, and then electron-hole pair generation in a typical semiconducting material, the efficiency of these devices is not up to the mark. The progress in h-BN based detectors requires a review to envision the further improvement in this technology.

GRACE-derived Terrestrial Water Storage Anomalies (TWSA) continue to be used in an expanding array of studies to analyze numerous processes and phenomena related to terrestrial water storage dynamics, including groundwater depletions, lake storage variations, snow, and glacial mass changes, as well as floods, droughts, among others. So far, however, few studies have investigated how the factors that affect total water storage (e.g., precipitation, runoff, soil moisture, evapotranspiration) interact and combine over space and time to produce the mass variations that GRACE detects. This paper is an attempt to fill that gap and stimulate needed research in this area. Using the Nile River Basin as case study, it explicitly analyzes nine hydroclimatic and anthropogenic processes, as well as their relationship to TWS in different climatic zones in the Nile River Basin. The analytic method employed the trends in both the dependent and independent variables applying two geographically multiple regression (GMR) approaches: (i) an unweighted or ordinary least square regression (OLS) model in which the contributions of all variables to TWS variability are deemed equal at all locations; and (ii) a geographically weighted regression (GWR) which assigns a weight to each variable at different locations based on the occurrence of trend clusters, determined by Moran’s cluster index. In both cases, model efficacy was investigated using standard goodness of fit diagnostics. The OLS showed that trends in five variables (i.e., precipitation, runoff, surface water soil moisture, and population density) significantly (p<0.0001) explain the trends in TWSA for the basin at large. However, the models R2 value is only 0.14. In contrast, the GWR produced R2 values ranging between 0.40 and 0.89, with an average of 0.86 and normally distributed standard residuals. The models retained in the GWR differ by climatic zone. The results showed that all nine variables contribute significantly to the trend in TWS in the Tropical region; population density is an important contributor to TWSA variability in all zones; ET and Population density are the only significant variables in the semiarid zone. This type of information is critical for developing robust statistical models for reconstructing time series of proxy GRACE anomalies that predate the launch of the GRACE mission and for gap-filling between GRACE and GRACE-FO.

Melanoma is widely recognized as one of the most lethal forms of skin cancer, with its incidence showing an upward trend in recent years. Nonetheless, the timely detection of this malignancy substantially enhances the likelihood of patients’ long-term survival. Several computer-based methods have recently been proposed in the pursuit of diagnosing skin lesions at their early stages. Despite achieving some level of success, there still remains a margin of error that the machine learning community considers to be an unresolved research challenge. This study presents a novel framework for the classification of skin lesions. The framework incorporates deep features to generate a highly discriminant feature vector, while also maintaining the integrity of the original feature space. Recent deep models including Darknet53, DenseNet201, InceptionV3, and InceptionResNetV2 are employed in our study for the purpose of feature extraction. Additionally, transfer learning is leveraged to enhance the performance of our approach. In the subsequent phase, the extracted feature information from the chosen pre-existing models is combined, with the aim of preserving maximum information, prior to undergoing the process of feature selection using a novel entropy-controlled grey wolf optimization (ECGWO) algorithm. The integration of fusion and selection techniques is employed to initially incorporate the feature vector with a high level of information and subsequently eliminate redundant and irrelevant feature information. The efficacy of our design is substantiated through the evaluation on three benchmark dermoscopic datasets, namely PH2, ISIC-MSK, and ISIC-UDA. In order to validate the proposed methodology, a comprehensive evaluation is conducted, including a rigorous comparison with established techniques in the field.

Advancements in technology, policies, and cost reductions have led to rapid growth in wind power production. One of the major challenges in wind energy production is the instability of wind power generation due to weather changes. Efficient power grid management requires accurate power output forecasting. New wind energy forecasting methods based on deep learning are better than traditional methods, like numerical weather prediction, statistical models, and machine learning models. This is more true for short-term prediction. Since there is a relationship between methods, climates, and forecasting complexity, forecasting methods do not always perform the same depending on the climate and terrain of the data source. This paper proposes a novel model that combines the variational mode decomposition method with a long short-term memory model, developed for next-hour wind speed prediction in a hot desert climate, such as the climate in Saudi Arabia. We compared the proposed model performance to two other hybrid models, six deep learning models, and four machine learning models using different feature sets. Also, we tested the proposed model on data from different climates, Caracas and Toronto. The proposed model showed a forecast skill between 61% to 74% based on mean absolute error, 64% to 72% based on root mean square error, and 59% to 68% based on mean absolute percentage error for locations in Saudi Arabia.

Pathologic angiogenesis is responsible for much of the vision loss that stems from several chorioretinal vascular diseases including neovascular age-related macular degeneration (nAMD), diabetic retinopathy (DR), and retinal vein occlusion (RVO). Because vascular endothelial growth factor (VEGF) serves as a pivotal angiogenic molecule, it has emerged as the primary target for therapeutic drugs. Current anti-VEGF therapy is dominated by bevacizumab, ranibizumab, and aflibercept, all of which have been available for more than a decade, but new drugs, both biosimilars (Byooviz and Cimerli) and drugs whose primary aim is to decrease treatment burden (brolucizumab, faricimab, and the ranibizumab port delivery system), have been approved. Recent failures (conbercept, abicipar, and KSI-301) emphasize the complexity of drug development and the difficulties faced by innovators. Most therapies under development, including tyrosine kinase inhibitors and gene therapy, include VEGF-A blockade as their primary function and aim to extend durability rather than increase peak efficacy. But even as many new drugs look to extend durability, cost containment with mandated use of biosimilars serves to balance the therapeutic landscape.

Shape memory alloys (SMAs) are increasingly used in the fields of aviation, automotive and biomedicine due to their unique properties. Nickel-Titanium (NiTi) alloy materials, which are one of the shape memory alloys, are among the most frequently used alloy materials. The shape memory and super elastic effects of NiTi alloys, high ductility and deformation hardening make it difficult to shape burr. An additional problem is the formation of a white layer during machining. In this study, surface milling operations were performed in dry cutting conditions with uncoated cutting tools with different nose radii. The processing parameters were determined based on the experience gained as a result of the preliminary tests. Tungsten carbide cutting tools with different nose radii (0.4mm and 0.8mm) were used for the milling operations. Milling was carried out at three different cutting speeds (20, 35, 50 m/min), feed rates (0.03, 0.07, 0.14 mm/tooth), and a constant axial cutting depth (0.7 mm). As a result of our experimental studies, the best tool life was found to be in 0.8 mm nose radius cutting tools at 20 m/min cutting speed and 0.03 mm/tooth feed rate (0.264 mm). The minimum average surface roughness was found after milling with 0.8 mm nose radius cutting tool at 20 m/min cutting speed and 0.03 mm/tooth feed rate (0.346 μm). It has been determined that increasing the cutting tool nose radius reduces both the flank wear over the cutting tool and the average surface roughness.

The study aims to examine the effects of artificial intelligence (AI) on the consistency and analysis of financial statements in hotels in ASEZA, Jordan. This research is an exploratory, empirical study, which uses the methodology of data collection and interpretation to draw conclusions. The researchers used the arithmetic mean, standard deviation, T-test and ANOVA test to calculate the degree of significance of the study questions. The findings of a basic linear regression study of the impact of AI implemented in Jordanian hotels on the integration of accounting information systems and the association between AI and the integration of accounting information systems (R = 59.6%) also indicate that the fixed limit value amounted to (2.060) and the value of (Beta) for T-test

This study evaluates the effectiveness of Darknet53 and VGG16 pretrained models to develop a hybrid ensemble model named HybridPlantNet23 deep learning model for effective plant disease classification, using the publicly available dataset ‘A Dataset of Leaf Images’ from Mendeley webpage. The preprocessing of the dataset involved resizing the images to the respective requirements of the pretrained models to develop a combined datastore which served as the input. All experiments were conducted using MATLAB R2023b deep network designer interface. Model performances were evaluated based on the conventional accuracy, precision, recall, and F1-score. VGG16 achieved the highest accuracy (97.25%), precision (96.30%), recall (96.96%), and F1-score (96.55%), outperforming both Darknet53 and the ensemble HybridPlantNet23 model. Despite the advanced architecture of the ensemble model, its performance (accuracy: 95.37%, precision: 93.56%, recall: 94.20%, F1-score: 93.74%) was not significantly superior, thus highlighting scientific reasons behind this development. Recommendations for future works were provided accordingly.