The multi-modal data fusion method based on IA-net and CHMM technical proposed is designed to solve the problem that the incompleteness of target behavior information in complex family environment leads to the low accuracy of human behavior recognition.The two improved neural networks(STA-ResNet50、STA-GoogleNet)are combined with LSTM to form two IA-Nets respectively to extract RGB and skeleton modal behavior features in video. The two modal feature sequences are input CHMM to construct the probability fusion model of multi-modal behavior recognition.The experimental results show that the human behavior recognition model proposed in this paper has higher accuracy than the previous fusion methods on HMDB51 and UCF101 datasets. New contributions: attention mechanism is introduced to improve the efficiency of video target feature extraction and utilization. A skeleton based feature extraction framework is proposed, which can be used for human behavior recognition in complex environment. In the field of human behavior recognition, probability theory and neural network are cleverly combined and applied, which provides a new method for multi-modal information fusion.

The three-pronged sliding universal coupling is a new kind of three-pronged coupling. To study its kinematic and dynamic characteristics, directional cosine matrices are utilized as tools to analyze the coordinate systems by establishing simplified geometric models and corresponding motions. Through the analysis of the motions of the input and output shafts and employing the method of single-force element, a set of equilibrium equations for the forces acting on the output shaft and the input shaft are formulated for solution analysis. The research indicates that during the rotation process, there exists a small angular difference between the input shaft and the intermediate shaft, demonstrating the quasi-constant angular velocity characteristics of the new tripod sliding universal coupling. The curves of the forces and torques acting on each component of the coupling approximate sinusoidal curves. The optimal operating angle range for the new tripod universal coupling is at angle , during which the system exhibits good transmission and mechanical performance.

Some management practices, such as maintaining birds under high group density, used in the poultry industry may cause birds stress, leading to injurious behaviors, such as injurious pecking, aggression, and cannibalism. In addition, some management practices used to prevent severe injuries in birds may cause pain. Beak trimming (BT), removal of 1/3 to 1/2 of a beak, is a routine husbandry procedure practiced in laying hens to prevent or reduce injurious behaviors. However, BT causes tissue damage, which may increase somatosensory sensitization of the damaged nerve tissues, resulting in pain (acute, chronic or both) in the treated birds because the beak is a complex, functional organ with an extensive nerve supply. BT has already been heavily regulated or prohibited in several European countries and, in time, this trend will impact the practice used in the United States poultry industry. With the growing public concern for poultry welfare there is a pressing need to identify and develop alternatives to BT. Probiotics defined “as a source of live (viable) naturally occurring microorganisms (direct-fed microbials)” have been used as dietary supplements or functional foods to target gut microbiota (microbiome) for prevention or therapeutic treatment of mental diseases including social stress-induced psychiatric disorders in humans and various experimental animals. In our studies, chickens were used as an animal model to assess if dietary supplementation of probiotic, Bacillus subtilis, reduces injurious behaviors following social challenge. Hens of Dekalb XL strain, an aggressive line, were used in the studies. Our results indicate that dietary supplementation of the Bacillus subtilis based probiotic reduces aggressive behaviors in chickens. These results suggest dietary probiotics could be a suitable strategy for increasing hosts’ health status and welfare conditions.

SARS-CoV-2, the newly identified human coronavirus causing severe pneumonia epidemic, was probably originated from Chinese horseshoe bats. However, direct transmission of the virus from bats to humans is unlikely due to lack of direct contact, implying the existence of unknown intermediate hosts. Angiotensin converting enzyme 2 (ACE2) is the receptor of SARS-CoV-2, but only ACE2s of certain species can be utilized by SARS-CoV-2. Here, we evaluated and ranked the receptor-utilizing capability of ACE2s from various species by phylogenetic clustering and sequence alignment with the currently known ACE2s utilized by SARS-CoV-2, predicting potential intermediate hosts of SARS-CoV-2.

Macrobrachium rosenbergii is a valuable freshwater prawn in Asian aquaculture. In recent years, a new symptom that was generally called as ‘white head’ caused high mortality in M. rosenbergii farms in China. Samples of M. rosenbergii, M. nipponense, Procambarus clarkii, M. superbum, Penaeus vannamei, and Cladocera from a farm suffering from ‘white head’ in Jiangsu Province were collected and analyzed in this study. Pathogen detection showed that all samples were positive for Shrimp hemocyte iridescent virus (SHIV). Histopathological examination revealed dark eosinophilic inclusions and pyknosis in hematopoietic tissue, hepatopancreas and gills of M. rosenbergii and M. nipponense. Blue signals of in situ DIG-labeled LAMP (ISDL) appeared in hematopoietic tissue, hemocytes, hepatopancreatic sinus, and antennal gland. TEM of ultrathin sections showed a large number of SHIV particles with a mean diameter about 157.9 nm. The virogenic stromata and budding virions were observed in hematopoietic cells. Quantitative detection by TaqMan probe based real-time PCR of different tissues in natural infected M. rosenbergii showed that hematopoietic tissue contained the highest SHIV load with a relative abundance of (25.4±16.9)%. Hepatopancreas and muscle contained the lowest SHIV load with a relative abundance at (2.44±1.24)% and (2.44±2.16)%, respectively. Above results verified that SHIV is the pathogen causing ‘white head’ in M. rosenbergii, and M. nipponense and Pr. clarkii are also the susceptible species of SHIV.

The increasing prevalence of obesity and sedentary lifestyles has led to an increased incidence of metabolic syndrome (MetS) worldwide. In Taiwan, middle-aged women are at a greater risk of MetS, type 2 diabetes, and cardiovascular disease than men are because they have more subcutaneous fat and larger waist circumferences compared to men with equal visceral fat levels. This study investigated the effects of calorie restriction supplemented with fish oil (CRF) in middle-aged women with MetS. For 12 weeks, 75 eligible participants were randomly assigned either calorie restriction (CR) or CRF. Both dietary intervention groups were further divided into two age groups: ≤45 and >45 years. The changes in MetS severity, inflammatory status, iron status, and red blood cell fatty acid profile were evaluated. Seventy-one participants completed the trial. Both dietary interventions significantly ameliorated MetS and improved the participants’ inflammatory status. CR significantly increased total iron binding capacity, whereas CRF increased hepcidin levels. Furthermore, CRF significantly increased the n-6/n-3 and arachidonic acid/docosahexaenoic acid ratios. In conclusion, CR and CRF improved the anthropometric and MetS characteristics of early-middle aged women, including body weight, blood glucose levels, triglyceride levels, as well as the scores for the homeostasis model assessment of insulin resistance and quantitative insulin sensitivity cheque index. Dietary intervention was more effective in >45-year-old women than ≤45-year-old women.

Glioblastoma (GBM) is the most common malignant brain tumor in adults. Despite advancements in treatment, the prognosis for patients with GBM remains poor due to its aggressive nature and resistance to therapy. CRISPR-based genetic screening has emerged as a powerful tool for identifying genes crucial for tumor progression and treatment resistance, offering promising targets for tumor therapy. In this review, we provide an overview of the recent advancements in CRISPR-based genetic screening approaches and their applications in GBM. We highlight how these approaches have been used to uncover genetic determinants of GBM progression and susceptibility to various therapies. Furthermore, we discuss ongoing challenges and future directions of CRISPR-based screening methods in advancing GBM research.

Background: Coronavirus disease (COVID-19) related pneumonia is leaded by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), which infects host cells through receptors named Angiotensin-converting enzyme 2 (ACE2). Smoking is thought to be related to poor disease prognosis, as a large amount of evidence highlights the negative effects of smoking on lung health and its causal relationship with various respiratory diseases. Methods: We first evaluated the role of ACE2 expression level with tobacco effect. And correlation analyses were used to identify the related genes of ACE2 both in smoker trait and human normal multi-tissues. After intersections, hub genes were later used to further GSEA and co-regulated mechanisms were explored by GeneMANIA. We used UALCAN to perform survival curves of pan-cancers included 33 types of cancers. New clinical model of top co-occurrence cancer type was constructed and validated. Results: Effected by cigarette smoking, the expression level of ACE2 expressed statistically upwards in current smokers compared with never smokers, upwards in groups after acute smoke exposed compared with normal control. But no strong evidence detected in third-hand smoke, as poor amounts of samples, only 4. A little trend of expressing upwards became in groups after third-hand smoke compared with groups after clean air exposing. 4 genes included PIR, ADH7, AKR1C2 and AKR1C3 were identified as ACE2 related genes in smoker trait and human normal multi-tissues. Then, we made the survival curves of pan-cancers in 4 genes. Brain lower grade glioma was the co-occurrence type as both ACE2, PIR and AKR1C3 had the significantly prognostic situation. Later, we made the new clinical prediction model as the C-index was 0.827 and the Area Under Curves (AUCs) of 1-year survival, 2-year survival and 3-year survival were 0.921(95%CI, 0.882-0.961), 0.911(95%CI, 0.860-0.962) and 0.878(95%CI, 0.818-0.939). In inner validation, the AUCs of 1-year survival, 2-year survival and 3-year survival were 0.777(95%CI, 0.640-0.914), 0.916(95%CI, 0.842-0.990) and 0.888(95%CI, 0.768-1.000). In outer validation one, the AUCs of 1-year survival, 2-year survival and 3-year survival were 0.764(95%CI, 0.672-0.856), 0.848(95%CI, 0.783-0.913) and 0.748(95%CI, 0.656-0.841). And in outer validation two the AUCs of 1-year survival, 2-year survival and 3-year survival were 0.740(95%CI, 0.654-0.826), 0.766(95%CI, 0.688-0.843) and 0.794(95%CI, 0.721-0.866). Conclusions: In our study, we compared the ACE2 expression level between smokers and non-smokers crowds and identified associated hub genes. Then we explored the further role of hub genes in tumor fields to identify the correlation and influence between the avoidable host factors such as smoking on COVID-19 contamination and tumor. ACE2 and AKR1C3 are potential prognostic genes for brain lower grade glioma, and we created the web dynamic nomogram and encapsulation app through validations.

Agriculture is an industry that heavily relies on the environment. The increasing frequency of ex-treme disasters attributable to climate change has adversely affected agricultural land and dis-rupted the stability of the supply of agricultural products. Therefore, we implemented a research program focused on current strategies for adapting to agricultural meteorological disasters. The primary goal was to actively promote disaster prevention information and techniques through information platforms and applications and to provide refined forecasting and an early warning system to enhance preparedness for and recovery from agricultural disasters. This initiative can transform passive mitigation into dynamic action by disseminating crucial information to farmers. We integrated meteorological data and crop characteristics to develop disaster prevention strate-gies for the predisaster, during-disaster, and postdisaster stages to empower farmers to implement autonomous disaster prevention, ensuring their profitability and minimizing the impact of disas-ters. This paper presents an agricultural disaster prevention system involving cross-disciplinary collaboration to establish an early warning system for crop disasters. However, the effectiveness of the early warning system relies on the availability of complete meteorological and crop infor-mation, necessitating high-density agricultural meteorological stations, refined weather forecast services, historical crop damage data, and ongoing research and development on disaster preven-tion technology. In the system, a diversified social media interface is used to provide local farmers with weather forecast information. When impending disasters are identified, the platform acti-vates disaster prevention measures to reduce agricultural losses. This article paper introduces Taiwan’s agricultural disaster prevention system as a complete disaster prevention strategy.

This paper focuses on robust multi-criteria traffic network equilibrium problems with path capacity constraints. The concepts of robust vector equilibrium and robust vector equilibrium with respect to worst case are introduced, respectively. To generate a subset of robust vector equilibrium, an equivalent min-max optimization problem is constructed. In addition, a direct search algorithm, in which the step size without derivatives and redundant parameters, for solving this min-max problem is proposed. To find a subset of robust vector equilibrium with respect to worst case, an equivalent smoothing optimization problem based on a variant version of ReLU activation function is established. Numerical experiments are also presented to expound the advantages of the algorithms.

In this paper, the distributed formation tracking control problem of quadrotor unmanned aerial vehicles (UAVs) is considered. Adaptive backstepping technology is used to design flight control schemes for quadrotor UAVs. For the position subsystem, a distributed robust formation tracking control scheme is developed to achieve formation flight of quadrotor UAVs and track the desired flight trajectory. For the attitude subsystem, an adaptive disturbance rejection control scheme is proposed to achieve attitude stabilization during UAV flight under uncertain disturbances. Compared with the existing results, the novelty of this paper is that the proposed formation control scheme does not require the use of the quadrotor model parameters. Finally, a quadrotor UAV swarm system is used to verify the effectiveness of the proposed control scheme.

Poverty alleviation is a hallmark of post-revolution Chinese policymaking. Since 1978, the Communist Party of China (CPC) has implemented successive waves of poverty alleviation policies whose effects have become the focus of an ever-increasing body of academic literature. This paper reviews this diverse but limited literature that evaluates the impact of the CPC’s poverty reduction programs through four major channels, namely fiscal investment programs, social safety nets, rural governance on the village-, county- and provincial level, and the relocation of rural populations from destitute regions. This paper aims to synthesize results and evaluate whether and how the abovementioned poverty alleviation programs have had distinct positive or negative impacts on regional development outcomes. Furthermore, I highlight contradictions in empirical findings to motivate the discussion about contextual importance when designing and implementing future poverty alleviation programs. Finally, I suggest that an exhaustive and critical appraisal of the empirical strategies used in this literature would further the development and application of more accurate and informative methodologies.

Rice production in the Tonle Sap basin is one of the main drivers for economic and social development in Cambodia. The Tonle Sap basin has experienced many different forms of disasters while more attention has been drawn to drought disaster. The objective of this study is to assess the impacts of drought on agriculture and food security through a case study of the Baribo basin, a sub-basin of Tonle Sap basin, Cambodia. Ground observations and satellite-based products were used for drought assessment from 1985 to 2008 which was the period with relatively good data quality. The Standardized Precipitation Index (SPI) and Standard Vegetation Index (SVI) were selected for meteorological and agricultural droughts assessment, correspondingly. Both SPI and SVI consistently suggested that drought is a major natural hazard causing food insecurity in the target basin. The highest drought intensity (DI) and severity (DS) occurred between 1993-1994 and the longest drought duration (DD) occurred between 2002 and 2006. The most severe damage to rice production was in 2004, affecting about 46% of the total cultivated area. The analysis showed that drought duration had a strong relationship with the affected area growing rice as well as food insecurity in the Tonle Sap basin.

Surface soil moisture (SSM) is a significant factor affecting crop growth. This paper presents a method for retrieving SSM over wheat-covered areas using synergy dual-polarization C-band Sentinel-1 synthetic aperture radar and Sentinel-2 optical data. Firstly, a modified water cloud model (WCM) was proposed to remove the influence of vegetation from the backscattering coefficient of the radar data. The vegetation fraction was then introduced in this WCM, and the vegetation water content (VWC) was calculated using multiple linear regression model. Subsequently, the support vector regression technique was used to retrieve the SSM. This approach was validated using in-situ measurements of the wheat field in Hebi, in the north of Henan Province. The key findings of this study are as follows: (1) Based on vegetation indices obtained from Sentinel-2; the proposed VWC estimation model can effectively eliminate the influence of vegetation; (2) compared with vertical transmit and horizontal receive polarization, vertical transmit and vertical receive polarization is better for detecting changes in SSM at different growth stages of wheat; and, (3) the validation results indicated that the proposed approach, based on Sentinel-1 and Sentinel-2 data, successfully retrieved SSM in the study area.

One of the most important applications in the wireless sensor networks (WSN) is to classify mobile targets in the monitoring area. In this paper, a multi-DBN weighted voting classification algorithm is proposed on the basis of the Deep Belief Network (DBN) classifier and combined with the idea of voting method, which is implemented on the nodes of the WSN monitoring system by means of "upper training, lower transplantation" appraoch. The performance of the algorithm is verified by using real-world experimental data, and the results show that the proposed method has a higher accuracy in classifying the target signal features, achieving an average classification accuracy of 84.63% across four different types of moving targets. The experiment reveals that the multi-DBN weighted voting algorithm enhances the target classification accuracy by approximately 5% in comparison to the single DBN classifier, but the memory and computation time required for the algorithm to run are also increased at the same time. Compared to the FFNN classifier, which exhibited the highest classification accuracy among the four selected methods, the algorithm achieves an improvement of approximately 8.8% in classification accuracy. However, it incurs greater time overhead to run.

Traveling salesman problems (TSPs) are well-known combinatorial optimization problems, and most existing algorithms are challenging for solving TSPs when its scale is large. To improve the efficiency of solving large-scale TSPs, this work presents a novel adaptive layered clustering framework with improved genetic algorithm (ALC\_IGA). The primary idea behind ALC\_IGA is to break down a large-scale problem into a series of small-scale problems. First, the $k$-means and improved genetic algorithm are used to segment the large-scale TSPs layer by layer and generate the initial solution. Then, the developed two phases simplified $2$-opt algorithm is applied to further improve the quality of the initial solution. The analysis reveals that the computational complexity of the ALC\_IGA is between $O(n\log n)$ and $O(n^2)$. The results of numerical experiments on various TSP instances indicate that, in most situations, the ALC\_IGA surpasses the state-of-the-art algorithms in convergence speed, stability, and solution quality. Specifically, the ALC\_IGA can solve instances with $2 \times 10^5$ nodes within 0.15h, $1.4 \times 10^6$ nodes within 1h, and $2 \times 10^6$ nodes in three dimensions within 1.5h.

Earth observation satellites can capture images of specific areas in Earth's orbit based on user requirements. Despite the high demand for satellite imagery, satellites remain a scarce resource. When there are many observation tasks that are large and dense, they may interfere with each other due to satellite mobility. To address this issue, a multi-satellite scheduling algorithm based on a task merging mechanism has been proposed. This paper proposes a two-stage approach to the problem: task merging phase and merging task scheduling phase. The task merging phase introduces two methods based on Mean Shift and Complete Graph to generate the merging task set. In the merging task scheduling phase, a multi-satellite scheduling algorithm based on merging tasks is employed to solve the problem. Finally, certain measurement experiments suggest the effectiveness of the algorithm.

Glycosidic linkage analysis was conducted on the unfractionated polysaccharides in the alcohol-insoluble residues (AIRs) prepared from six red seaweeds (Gracilariopsis sp., Prionitis sp., Mastocarpus papillatus, Callophyllis sp., Mazzaella splendens, and Palmaria palmata) using GC-MS/FID analysis of partially methylated alditol acetates (PMAAs). The cell walls of P. palmata primarily contained mixed-linkage xylans and small amounts of sulfated galactans and cellulose. In contrast, the unfractionated polysaccharides of the other five species were rich in galactans displaying diverse 3,6-anhydro-galactose and galactose linkages with varied sulfation patterns. Different levels of cellulose were also observed. This glycosidic linkage method offers advantages for cellulose analysis over traditional monosaccharide analysis that is known for underrepresenting glucose in crystalline cellulose. Relative linkage compositions calculated from GC-MS and GC-FID measurements showed that anhydro sugar linkages generated more response in the latter detection method. This improved linkage workflow presents a useful tool for studying polysaccharide structural variations across red seaweed species. Furthermore, for the first time, relative linkage compositions from GC-MS and GC-FID measurements, along with normalized FID and total ion current (TIC) chromatograms without peak assignments, were analyzed using principal component analysis (PCA) as a proof-of-concept demonstration of the technique's potential to differentiate various red seaweed species.

Taiwan cobra (Naja atra) bites account for approximately 20% of all venomous snakebites in Taiwan. In Taiwan, the rates of wound necrosis and secondary infection from Taiwan cobra bites are higher than those associated with other venomous snakebites. Clinical tools to evaluate the infection risk after Taiwan cobra bites are lacking. Therefore, in this study, we developed a useful clinical tool to evaluate the infection risk after Taiwan cobra bites. Moreover, we investigated wound infection bacteriology. We analyzed the data of patients bitten by N. atra who had undergone freeze-dried neurotoxic antivenin treatment in emergency rooms of the Chang Gung Memorial Hospital network, which comprises seven hospitals and the largest medical system in Taiwan, from January 2001 to May 2017. Because patients with wound necrosis required antibiotics for infection treatment, we included only patients with wound infection but without tissue necrosis in the development of our Cobra Bacteriology of Infections in Taiwanese snake Envenomation (Cobra BITE) score by using univariate and multiple logistic regression. In total, 8,295,497 emergency department visits occurred from January 2001 to May 2017, and 195 patients were diagnosed has having cobra bites. Among them, 23 and 30 patients had wound necrosis and wound infection, respectively. The wound infection rate was 27.2% (53/195). Regardless of whether the patients had necrosis, Enterococcus faecalis and Morganella morganii were the main bacteria identified in the culture report. Gentamicin, ceftriaxone, ciprofloxacin, and levofloxacin are the ideal first-line antibiotics for treating N. atra bite wounds in Taiwan. As per our Cobra BITE score, the three factors predicting secondary wound infection after cobra bites are hospital admission, a white blood cell count (in 103/µL) × by neutrophil–lymphocyte ratio value of ≥114.23, and the use of antivenin medication. The area under the receiver operating characteristic curve for the Cobra BITE score system was 0.88. The ideal sensitivity and specificity were 0.89 and 0.76, respectively, and the optimal cutoff point for Cobra BITE score was 7. The Hosmer–Lemeshow p value was 0.4. In conclusion, our Cobra BITE study established a new practical clinical tool for clinicians to evaluate infection risk after N. atra bites. This score system enables the assessment of wound infections after N. atra bites, and it could be modified and improved in future for other Naja spp. bites.

Power spectra always play an important role in the theory of inflation. In particular, the ability to reproduce the galaxy matter power spectrum $ P(k) $ and the CMB temperature angular power spectrum $ C_l $’s to high accuracy is often considered a triumph of inflation. In our previous work, we presented an alternative explanation for the matter power spectrum based on nonperturbative quantum field-theoretical methods applied to Einstein’s gravity, instead of inflation models based on scalar fields. In this work, we review the basic concepts and provide further in-depth investigations. We first update the analysis with more recent data sets and error analysis, and then extend our predictions to the CMB angular spectrum coefficients $ C_l $, which we did not consider previously. Then we investigate further the potential freedoms and uncertainties associated with the fundamental parameters that are part of this picture, and show how recent cosmological data provides significant constraints on these quantities. Overall, we find good general consistency between theory and data, even potentially favoring the gravitationally-motivated picture at the largest scales. We summarize our results by outlining how this picture can be tested in the near future with increasingly accurate astrophysical measurements.

In view of the problem of charging and hydrogen filling facilities construction in the transition from fuel vehicles to electric vehicles and hydrogen fuel cell vehicles, in order to meet the electric energy demand of electric vehicles and hydrogen energy demand of hydrogen fuel cell vehicles at the same time, this paper puts forward a method of siting and capacity determination of electric-hydrogen refueling integrated station (EHRIS) based on Voronoi diagram and particle swarm algorithm based on calculating the demand of charging and filling of hydrogen in vehicles. Firstly, OD pair(Origin-Destination) is used to represent the starting point and end point of the car to portray the travel demand of the car, and on the basis of the traffic network model, the shortest driving path of the new energy car is determined by Dijkstra algorithm, and Monte Carlo simulation is used to get the electric-hydrogen energy demand of the car; secondly, the Voronoi diagram is introduced to classify the service scope of the electric-hydrogen charging station to determine the equipment capacity of the electric-hydrogen charging station, while taking into account the electric-hydrogen charging and refueling capacity. Secondly, a Voronoi diagram is introduced to divide the service scope of the EHRIS, determine the capacity of the equipment in the EHRIS, and consider the distance constraints between the sites of EHRIS, so as to make the division of the site and service scope more reasonable. Finally, a dynamic optimal current model framework for distribution networks based on second-order cone relaxation is established, and each element of the active distribution network is planned, so that the distribution network can operate safely and stably after being connected to the EHRIS. With the objective of minimizing the total social cost of EHRIS and considering the constraints of the charging equipment and hydrogen production and injection equipment of the EHRIS, a siting and capacity model to meet the electric-hydrogen energy demand of electric and hydrogen fuel cell vehicles is developed, and solved by a particle swarm algorithm. Finally, the simulation planning is carried out with Sioux Falls city and IEEE33 network, which ensures the stable operation of the power grid while meeting the energy demand of automobiles, and the results verify the effectiveness and feasibility of the proposed method.

We investigate and discuss in detail the structure of the restricted singular value decomposition for a tensor triplet under t-product (T-RSVD). The algorithm is provided with a numerical example illustrating the main result. For applications, we consider color image watermarking processing with T-RSVD.

The ever deepening population aging has brought opportunities and challenges to the continued expansion of tourism consumption in China. In this article, the impact of population aging on household tourism consumption was studied from both theoretical and empirical aspects. First, the micro mechanisms of the impact of population aging on household tourism consumption were analyzed, which include economic condition mechanism, intergenerational care mechanism, health status mechanism and Internet use mechanism. Subsequently, the impact of population aging on household tourism consumption and its impact mechanisms were tested, and the heterogeneity analysis was conducted, by using the data of China Family Panel Studies (CFPS) from 2014, 2016 and 2018. The main conclusions of the article are as follows: (1) Population aging has a significant negative impact on household tourism consumption, and a series of robustness test results such as endogenous treatment support this finding. (2) The results of the impact mechanism test show that population aging has a negative mediating effect on household tourism consumption by reducing household economic conditions. The moderating effect of intergenerational care on the effect of population aging on household tourism consumption is insignificant. Health status of the elderly and Internet use have a significant positive moderating effect on the impact of population aging on household tourism consumption. (3) The results of the heterogeneity analysis show that the negative impact of population aging on household tourism consumption in urban areas is greater than that in rural areas, and the negative impact of population aging on household tourism consumption of families with the old-old elderly is greater than that of falimies with the young-old elderly. The conclusions of this article provide important references for activating tourism consumption in China in the context of population aging.

In order to solve the problem of feature extraction of underwater acoustic signals in complex ocean environment, a new method for feature extraction from ship radiated noise is presented based on empirical mode decomposition theory and permutation entropy. It analyzes the separability for permutation entropies of the intrinsic mode functions of three types of ship radiated noise signals, and discusses the permutation entropy of the intrinsic mode function with the highest energy. In this study, ship radiated noise signals measured from three types of ships are decomposed into a set of intrinsic mode functions with empirical mode decomposition method. Then, the permutation entropies of all intrinsic mode functions are calculated with appropriate parameters. The permutation entropies are obviously different in the intrinsic mode functions with the highest energy, thus, the permutation entropy of the intrinsic mode function with the highest energy is regarded as a new characteristic parameter to extract the feature of ship radiated noise. After that, the characteristic parameters, namely, the energy difference between high and low frequency, permutation entropy, and multi-scale permutation entropy, are compared with the permutation entropy of the intrinsic mode function with the highest energy. It is discovered that the four characteristic parameters are at the same level for similar ships, however, there are differences in the parameters for different types of ships. The results demonstrate that the permutation entropy of the intrinsic mode function with the highest energy is better in separability as the characteristic parameter than the other three parameters by comparing their fluctuation ranges and the average values of the four characteristic parameters. Hence, the feature of ship radiated noise can be extracted efficiently with the method.

Cambodia is a predominantly agrarian society, with a majority of the population residing in rural areas and relying on agriculture for food and income. The primary sources of food for the Khmer society are rice and fish. However, the country faces vulnerabilities due to climate change, natural disasters, impacts of hydropower and infrastructure development, and land grabs, which disrupt food sources and the livelihoods of local communities. Since 2015, the Royal Government of Cambodia (RGC) has been actively promoting rice production for export, resulting in increased rice farming seasons and annual rice production. Despite these efforts, a significant portion of the population still experiences food insecurity. Therefore, this study aims to explore the reasons why food security issues persist despite the government program to increase rice production. The study involves a review of existing literature and an examination of food security in three provinces in the Cambodian Mekong Delta. It concludes that, on the one hand, the increased rice production has increased food availability, but access to and utilization of food have been challenged by indebtedness, increased cost of production and migration, and on the other hand, the rights to foods have been challenged by land crabs, water conflicts, and lack of sectoral integrations of food systems; and compounded by climate change and environmental degradation, which all contribute to food security.

Although instructional feedback plays an essential role in regulating learning and improving performance, few studies have systematically investigated the needs of teachers and students for instructional feedback system or developed designs and experiments, especially at the high school level. To address this research need, the present study investigated the needs of selected students and teachers in a high school in Hubei Province, China, and designed and developed a diagnostic visual feedback system for an experimental study with 125 students from a 10th-grade biology class in the same high school. The results showed that this diagnostic visual feedback report improved student performance (ES=0.37) and that functions such as misconception location, knowledge diagnosis, and knowledge alert were well received by students. These findings have multiple implications for facilitating the design and development of diagnostic visual feedback system.

Pyrethroid pesticides (PYRs) as the third most widely used pesticides, following organophosphorus and carbamate pesticides, which are of significant importance in the analysis and detection of vegetables. However, the current pretreatment technology for PYRs confronts challenges of difficult separation and low enrichment efficiency, resulting in a cumbersome and time-consuming pretreatment process with poor selectivity. Here, a simple and efficient magnetic solid-phase extraction (MSPE) strategy was developed to simultaneously purify and enrich five PYRs in vegetables, with the magnetic covalent organic framework nanomaterial COF-SiO2@Fe3O4 as an adsorbent. The COF-SiO2@Fe3O4 was prepared by a simple solvothermal conditions method, using Fe3O4 as magnetic core, benzidine and 3,3,5,5-tetraaldehyde biphenyl as two building units. COF-SiO2@Fe3O4 could effectively capture the targeted PYRs by virtue of its abundant π-electron system and hydroxyl groups. The impact of various experimental parameters on extraction efficiency was investigated to optimize the MSPE conditions, including adsorbent amount, extraction time, elution solvent type and elution time. Subsequently, method validation was conducted under the optimal conditions in conjunction with gas chromatography-mass spectrometry (GC-MS). Within the range of 5.00–100 μg·kg-1 (1.00–100 μg·kg-1 for bifenthrin and 2.5–100 μg·kg-1 for fenpropathrin), the five PYRs exhibited a strong linear relationship, with determination coefficients ranging from 0.9990 to 0.9997. The limits of detection (LODs) were 0.3–1.5 μg·kg-1, and the limits of quantification (LOQs) were 0.9–4.5 μg·kg-1. The recoveries were 80.2–116.7% with relative standard deviations (RSDs) below 7.0%. Finally, COF-SiO2@Fe3O4, NH2-SiO2@Fe3O4 and Fe3O4 were compared as MSPE adsorbents for PYRs. The results indicated that COF-SiO2@Fe3O4 was an efficient and rapid selective adsorbent for PYRs. This method holds promising prospects for the determination of PYRs in real samples.

Monin-Obukhov similarity theory (MOST) overestimates wind shear in some atmospheric stable conditions, i.e. Richardson number $R_f<0.25$. The overestimated wind shear that leads to an under-predicted friction wind speed and a lower ambient turbulence intensity for a given hub-height reference wind speed and a given roughness length, could influence wake modeling of a wind turbine. This work investigates the side effects of the breakdown of MOST on wake modeling under stable conditions and makes some modifications to the flow similarity functions to eliminate these side effects. Based on a field measurement in a wind farm, we firstly show that MOST predicts a larger wind shear for the atmospheric stability parameter $\zeta>0.1$ and proposes new flow similarity functions without constraining $R_f$ to limit the overestimated wind shear by MOST. Next, different turbulence models based on MOST and a modified one based on the new similarity functions are investigated through numerical simulations. These turbulence models are combined with the actuator disk model (AD) and Reynolds-averaged Navier–Stokes equations (RANS) to model wind turbine wakes under stable conditions. As compared to measurements, numerical results show that turbulence models based on MOST result in larger wake deficits and slower wake recovery rate with a square root of the mean-squared-error (RSME) of wake deficit in the range of 0.07-0.18. This overestimated wake effect is improved by applying the new similarity functions and the RSME of wake deficit is averagely reduced by 0.05. Finally, we check the role of the under-predicted turbulence intensity playing in the larger wake deficit predicted by models based MOST. Additional numerical simulations using the modified turbulence model are carried out, in which the roughness length is reduced to impose a hub-height ambient turbulence intensity equivalent to the MOST case. Simulation results show that reducing turbulence intensity enhances wake effects, however, it cannot reproduce the large wake deficit predicted by models based on MOST, which suggests that the overestimated wake effect by MOST could be also related to the overestimated wind shear.

Singapore, being a land-scarce country, is heavily dependent on imported food, which poses a challenge in ensuring food security. In addition, the substantial amount of food waste generated in Singapore further deepens food insecurity challenges, imposing enormous pressure on the country's food and land resources. In the recent years, valorising food waste streams into higher value products has been an increasing trend in tackling food wastage due to its economical and environmental benefits. This paper provides a thorough review on food waste valorisation in Singapore and summarizes critical information from the current food landscape to the food waste management strategies adopted. The review highlights the prototypes developed from food waste streams by the local research and development capabilities and the technological processing and techniques used for versatile applications ranging from food and nutraceuticals to urban agriculture. The challenges associated with the valorisation of food waste are also addressed. Two ambitious Initiatives by the Singapore government Zero Waste Plan and the 30-by-30 food security goal to encourage food waste valorisation are explored and presented. The review serves as a reference for other countries in ensuring food security and achieving sustainable development goals.

Currently, drug screening is primarily based on human cell culture for initial high-throughput screening, and subsequently, rodent model to confirm the biological effects. However, the mammalian system is known for time-consuming and highly-cost to be difficult to perform high-throughput drug screening, which exists a critical gap between in vitro cell-based models and the in vivo mammalian models. Therefore, the zebrafish could bridge this gap in preclinical toxicity screening along the drug development pipeline because of its efficiency. We aimed to develop an in vivo zebrafish platform for rapid drug screening. Zebrafish, due to its high genomic conservation with mammals and rapid development and differentiation, it has many advantages, such as short life span, large number of offspring and low cost, easy manipulation for generating transgenic species, to serve as animal model for disease-based research. In 96-well microplates, zebrafish embryos were incubated with small molecular compounds that affected bone mineralization. The level of osteogenic mineralization was evaluated by fluorescent dye staining and quantified by image analysis software. Quantitative real time-PCR (qRT-PCR) was performed to evaluate the biological pathways involved in bone metabolism at the molecular level. The system was validated by demonstrating that response to alendronate and Dorsomorphin in zebrafish. In our study, we screened for 24 compounds within the CYCU-1120~1152 chemical library and identified 3 compounds, pentamidine (CYCU-1140), BML-267 (CYCU-1147), and alendronate (CYCU-1152), increased embryonic mineralization; while 6 compounds, RWJ-60475 (CYCU-1126), levamisole HCL (CYCU-1128), tetramisole HCL (CYCU-1129), fenvalerate (CYCU-1132), NSC-663284 (CYCU-1138), and BML-267ester (CYCU-1148), were inhibitory to bone mineralization. We also found that alendronate enhanced the level of bone mineralization by inhibiting osteoclast-related genes. To sum up, our research showed that zebrafish may have potential to be a drug-screening and mechanism-analysis platform for bone mineralization.

Osteoarthritis (OA) has become one of the most common disabilities among elders, especially in female. Obesity and mechanical injury causing OA are attributed to joint loading, cartilage disintegration, bone loss and inflammation as well. Several strategies used for treatment OA including non-pharmacological and pharmacological. Fucoidan possesses several bioactivities such as antitumor, antiviral, anticoagulation, anti-obesity, and immunomodulation. This study aims to investigate the effect of fucoidan in surgery-induced OA on diet-induced obesity rats. OA was induced by anterior cruciate ligament transection and partial medial meniscectomy (ACLT+MMx). Male SD rats were fed high-fat diet (HFD) for 4 weeks to induce obesity before ACLT+MMx to induce OA. OA rats were administered with intragastric water or fucoidan in three different concentrations (32 mg/kg, 64 mg/kg, and 320 mg/kg) after the surgeries for 40 days with HFD. We observed that the swelling in knee joint was alleviated and hind paw weight distribution was rectified after feeding fucoidan, with no significant effect on weight gain and feed intake. Fucoidan administration indicated no significant variation on HDL-Cholesterol level, but reduced plasma triglycerides and LDL-Cholesterol level. In addition, weight-bearing tests showed improvement in the fucoidan-treated group. Our results suggested that fucoidan may improve meniscal/ligamentous injury and obesity-induced OA.

Co-integration and Causality was built to conduct studies on causality relation between carbon intensity and coal consumption leading to providing important basis for the transition to a low carbon economy. The EG two-step method was performed to study the relation between carbon intensity and coal consumption of China during 1990-2015 and the co-integration and Granger test was constructed to build up the co-integration and error correction models for analysis of the interaction between carbon intensity and coal consumption. The results showed that in long term there is a stable co-integration relation and a positive correlation between carbon intensity and coal consumption; whereas fluctuations exist in short term and there is a one-way Granger causality of carbon intensity with respect to coal consumption.

The safe and efficient mining of coal seams with low porosity, low permeability and high inhomogeneity under complex geological conditions is a major challenge, among which the permeability of coal seams is crucial for coal mine gas extraction. The development of coal seam permeability enhancement technology can help coal mines to produce safely and efficiently, and the extracted coal bed methane can be utilized as a green energy. In order to study the effect of freezing and thawing on the evolution of mechanical and permeability properties of coal, triaxial permeability tests were carried out on low-permeability coal under two kinds of surrounding pressures. At the same time, dry, saturated and freeze-thaw coal were set up for comparison, and the effects of water and freeze-thaw were separated from each other. The triaxial mechanics and percolation laws of dry, saturated and freeze-thaw coal rocks were obtained, and the mechanism of the influence of freeze-thaw on the permeability evolution law of coal was revealed. The research results can provide theoretical guidance for the gas extraction technology of low permeability coal seams with increased permeability.

Dry eye disease (DED) is one of the most common eye diseases. There is at least one DED patient in almost every five people. AI-based research methods increasingly become the focus of DED diagnosis research. This study utilizes a systematic review method on DED AI-based diagnosis. 2112 unduplicated records are extracted from Google Scholar, Web of Science (WOS), PubMed, China National Knowledge Infrastructure (CNKI), and Scopus databases. The most contributed countries, institutions, authors, journals, references, and disciplines are recognized. Keyword distribution and hot topics are identified. Popular databases of ophthalmic images, videos, and electronic demographic medical records are discussed. The DED diagnosis, classification, and grading criteria are identified. The major diagnosing methods are clustered, compared, and investigated. Findings show that diagnosing method research could be classified into three categories based on the relationship between AI techniques, which are (1) ground truth and/or comparable standards for AI DED diagnosis (TBUT, S Ⅰ T, TMH, and OSDI), (2) potential methods for AI-based methods have a great advantage(DED detection based on meibometry Images, CASPs, IVCM Images, OCT Images, blink videos and ultrasonic imaging), (3) and the potential direction and supplemented methods for AI-based DED detection (DED detections based on tear osmolarity, proteomic analysis, TCM and demographic information). AI-based approaches based on digital ophthalmologic images play an important role in early screening. Challenges and future perspectives are discussed at the end of this article, academically and practically.

The fusion of "innovation theory" and "ecology" gave birth to a large number of studies on "innovation ecology", which mainly studies how to build an industrial ecological chain at the regional level, focusing on self-evolution, achieving ecological balance, and enabling the regional economy to take the path of sustainable innovation. This type of research borrows a lot of concepts from ecology, and very vividly describes the competition and cooperation relationships formed by various agents in the innovation system, laying a good foundation for qualitative analysis of the inherent dynamics of innovation development. However, many studies focus on the analogous description of ecosystems and economic systems, lacking scientifically and rigorously quantitative empirical research as a support. This paper uses network-based indicators such as degree, cluster coefficient, and betweenness centrality to measure the function and position of high-tech enterprises in the Z-Park in a business environment, so as to clarify the socio-economic meaning of the topological structure of the regional innovation system. On this basis, it provides theoretical references for regional innovation development and sustainable development policy formulation.

Various sudden shifts in financial market conditions over the past decades have demonstrated the significant impact of market structural breaks on firms' credit behavior. To characterize such effect quantitatively, we develop a continuous-time modulated Markov model for firms' credit rating transitions with the possibility of market structural breaks. The model takes a semi-parametric multiplicative regression form, in which the effects of firms' observable covariates and macroeconomic variables are represented parametrically and nonparametrically, respectively, and the frailty effects of unobserved firm-specific and market-wide variables are incorporated via the integration form of the model assumption. We further develop a mixtured-estimating-equation approach to make inference on the effect of market variations, baseline intensities of all firms' credit rating transitions, and rating transition intensities for each individual firm. We then use the developed model and inference procedure to analyze the monthly credit rating of U.S. firms from January 1986 to December 2012, and study the effect of market structural breaks on firms' credit rating transitions.

Artificial intelligence (AI) has found extensive applications in the sustainability domain. The municipal solid waste incineration (MSWI) process can achieve waste-to-energy (WTE) goals through the assistance of automation and information technologies. In theory, AI can facilitate the intelligent operation of the MSWI process, simultaneously achieving low pollution emissions and high production efficiency. This study provides an overview of AI applications in the MSWI process. Addressing fundamental challenges, the optimal control of the MSWI process is categorized into four aspects: modeling, control, optimization, and maintenance. Subsequently, this study conducts a detailed analysis and discussion of AI applications in each of these technological domains. In conclusion, this paper outlines the future research directions and provides an outlook on the fundamental issues pertaining to AI applications in the optimal control of the MSWI process.

Drones have been used in a variety of scenarios such as atmospheric monitoring, fire rescue, agricultural irrigation, etc., in which accurate environmental perception is of crucial importance for both decision-making and control. Among the drone sensors, the RGB camera is indispensable for capturing rich visual information for vehicle navigation but encounters a grand challenge in high-dynamic-range scenes that occur frequently in real applications. Specifically, the recorded frames suffer from under-exposure and over-exposure simultaneously and degenerate the successive vision tasks. To solve the problem, we take object tracking as an example and leverage the superior response of event cameras over a large intensity range to propose an event-assisted object tracking algorithm that can achieve reliable tracking under large intensity variations. Specifically, we propose to pursue feature matching from dense event signals, and based on which to (i) design a UNet-based image enhancement algorithm to balance the RGB intensity with the help of neighboring frames in the time domain, and then (ii) construct a dual-input tracking model to track the moving objects from intensity balanced RGB video and event sequence. The proposed approach is comprehensively validated in both simulation and real experiments.

Doubly-fed induction generators (DFIG) find extensive application in variable-speed wind power plants, providing notable advantages such as cost-effectiveness, operational flexibility across varying speeds, and enhanced power quality. This research focuses on the control of DFIGs employed in variable-speed wind turbine configurations. A suitable mathematical model is chosen for representative systems following a comprehensive review of contemporary research. Subsequent analysis reveals the instability of the open-loop time response of the system. To address this instability, the initial approach involves the implementation of the conventional Model Predictive Controller (MPC). However, the outcomes indicate that this controller falls short of delivering satisfactory performance despite the enhanced stability. In the subsequent phase, efforts are made to mitigate the impact of wind input variability by utilizing the Kalman filter, given its effectiveness in handling high variability. Following this, a novel methodology is introduced, which combines nonlinear MPC with the Lyapunov function. This method is based on the nonlinear model of the system. By using the Lyapunov function in the nonlinear MPC structure, the stability of the designed controller is guaranteed. The simulation results conducted using MATLAB software show that the output variables of the modeled DFIG system achieve stability within a reasonable timeframe applying the input.

Following Dirac’s notation in Quantum Mechanics (QM), we propose the Probability Bracket Notation (PBN), by defining a probability-bra (P-bra), P-ket, P-bracket, P-identity, etc…Using the PBN, many formulas, such as normalizations and expectations in systems of one or more random variables, can now be written in abstract basis-independent expressions, easy to expand by inserting a proper P-identity. The time evolution of homogeneous Markov processes can also be formatted in such a way. Our system P-kets are identified with probability vectors and our P-bra system is comparable with Doi’s state function or Peliti’s standard bra. In the Heisenberg picture of the PBN, a random variable becomes a stochastic process, and the Chapman-Kolmogorov equations are obtained by inserting a time-dependent P-identity. Also, some QM expressions in Dirac notation are naturally transformed to probability expressions in PBN by a special Wick rotation. Potential Applications show the usefulness of the PBN beyond the constrained domain and range of Hermitian operators on Hilbert Spaces in QM all the way to IT.

This article puts forward the bi-matrix games with crisp parametric payoffs based on interval value function approach. We conclude that the equilibrium solution of the game model can converted into optimal solutions of the pair of the non-linear optimization problem. Finally, experiment results show the efficiency of the model.

To evaluate the relative importance of IGF-I expression in various cell types for endochon-dral ossification, we quantified the trabecular bone at the secondary spongiosa and epiphysis of the distal femur in 8-12-week-old male mice with a global knockout of the Igf-I gene as well as conditional deletion of the Igf-I gene in osteoblasts, chondrocytes, osteo-blasts/chondrocytes, and their corresponding control wild type littermates. The osteoblast-, chondrocyte- and osteoblast/chondrocyte-specific Igf-I conditional knockout mice were generated by crossing Igf-I floxed mice with Cre transgenic mice in which Cre expression is under the control of Col1α2 or Col2α1 promoter. We found that global disruption of Igf-I resulted in 80% and 70% reduction in bone size, which is defined as total volume, at the secondary spongiosa and epiphysis of the distal femur, respectively. Abrogation of Igf-I in Col1α2-producing osteoblasts, but not Col2α1-producing chondrocytes, decreased bone size by 25% at both the secondary spongiosa and epiphysis while deletion of the Igf-I globally or specifically in osteoblasts or chondrocytes reduced trabecular bone mass by 25%. By contrast, global Igf-I knockout but not conditional knockout of Igf-I in osteoblasts and/or chondrocytes reduced trabecular bone mass in the epiphysis. The reduced trabecu-lar bone mass at the secondary spongiosa in osteoblast- and/or chondrocyte-specific Igf-I conditional knockout mice is caused by reduced trabecular number and increased trabec-ular separation. Immunohistochemistry studies revealed that expression levels of chon-drocyte (COL10, MMP13) and osteoblast (BSP) markers were reduced in the secondary spongiosa and the epiphyses in the global Igf-I knockout mice. Our data indicate that local and endocrine IGF-I actions in bone are pleiotropic and dependent on cell type as well as the bone compartment where IGF-I acts.

A new approach is presented for dynamic modeling of chemical and isotopic evolution of C1-3 during the hydrocarbon generation process. Based on systematic data obtained from published papers for pyrolysis of various hydrocarbon sources(type I kerogen/source rock, type II kerogen/source rock, type III kerogen/source rock, crude oil, asphalt, etc), the empirical evolution framework of chemical and isotopic composition of C1-3 during the hydrocarbon generation process was built. Although the empirical framework was built only by fitting large amount of pyrolysis data, the chemical and isotopic composition of C1-3 derived from the pyrolysis experiments all follow the evolution laws, convincing us that it is applicable to the thermal evolution process of various hydrocarbon sources. Based on the simplified formula of the isotopic composition of mixed natural gas at different maturities (δ13Cmixed) δ13Cmixed=(X〖*n〗_iA 〖*δ〗^13 C_iA+Y〖*n〗_iB 〖*δ〗^13 C_iB)/(X〖*n〗_iA+Y〖*n〗_iB ), it can be derived that the cumulative isotopic composition of alkane generated in certain maturity interval can be expressed by the integral of the product of instantaneous isotopic composition and instantaneous yield at certain maturity point, and then divided by the cumulative yield of alkane generated in corresponding maturity interval. Thus, the cumulative isotopic composition(A(X)), cumulative yield(B(X)), instantaneous isotope(C(X)),and instantaneous yield(D(x)) in the dynamic model comply with the following formula during the maturity interval of (X0-X) A(X)=(∫_(X_0)^X▒〖C(X)*D(X)dx〗)/(B(X)), where A(X) and B(X) can be obtained by fitting of pyrolysis data, and D(x) can also be obtained from the derivation of B(X). The dynamic model was applied on the pyrolysis data of Pingliang Shale to illustrate the quantitative evolution of cumulative yield ,instantaneous yield, cumulative isotope and instantaneous isotope of C1-3 with increasing maturity.The dynamic model can quantify the yield of methane, ethane and propane as well as δ13C1, δ13C2 and δ13C3 respectively during the hydrocarbon generation process, which is of great significance to evaluate the natural gas resources of hydrocarbon source rock with different maturity and to identify the origin and evolutionary process of hydrocarbons by chemical and isotopic data. Moreover, this model provides an approach to study the dynamic evolution of isotope series of C1-3 (including reversed isotopic series), which is hopeful to reveal the mechanism responsible for isotopic reversal when combined with post-generation studies.

Therapeutics antibodies have increasingly shifted the paradigm of disease treatments, from small molecules to biologics, especially in cancer therapy. Despite the increasing number of antibody candidates, much remains unknown about the antibody and how its various regions interact. In fact, the constant region can govern effects that might be useful in reducing the unwanted consequences resulted from systemic circulation. For this reason, apart from the commonly used IgG isotypes, IgA antibodies are promising therapeutics drugs, given its localized mucosal effects. While the antibody Fc effector cell activity has been well explored, recent research has shown evidences that the constant region of the antibody can also influence antigen binding, challenging the conventional idea of region-specific antibody functions. To further investigate this, we analyzed the IgA antibody constant and its allosteric effects onto the antigen binding regions, using recombinant Pertuzumab IgA1 and IgA2 variants. We found mutations in the C-region to reduce Her2 binding, and our computational structural analysis showed that such allosteric communications were highly dependent on the antibody hinge, providing the evidence to consider antibodies as a whole protein rather than a sum of functional regions.

Atmospheric stability affects wind turbine wakes significantly. High-fidelity approaches such as large eddy simulations (LES) with the actuator line (AL) model which predicts detailed wake structures, fail to be applied in wind farm engineering applications due to its expensive cost. In order to make wind farm simulations computationally affordable, this paper proposes a new actuator disk model (AD) based on the blade element method (BEM) and combined with Reynolds-averaged Navier–Stokes equations (RANS) to model turbine wakes under different atmospheric stability conditions. In the proposed model, the upstream reference velocity is firstly estimated from the disk averaged velocity based on the one-dimensional momentum theory, and then is used to evaluate the rotor speed to calculate blade element forces. Flow similarity functions based on field measurement are applied to limit wind shear under strongly stable conditions, and turbulence source terms are added to take the buoyant-driven effects into consideration. Results from the new AD model are compared with field measurements and results from the AD model based on the thrust coefficient, the BEM-AD model with classical similarity functions and a high-fidelity LES approach. The results show that the proposed method is better in simulating wakes under various atmospheric stability conditions than the other AD models and has a similar performance to the high-fidelity LES approach however in much lower computational cost.

A number of challenging combinatorial optimization problems in logistics, transportations, aeronautics, and astronautics can be modeled as orienteering problems (OPs). To address the classic OP and its real-world variants, a parallel adaptive local-search algorithm based on competition and evolution (Palace) is proposed in this paper. In this algorithm, the parallelism runs proper local-search metaheuristics and operators to obtain the population per generation; then the competition grades those metaheuristics and operators to highlight the outperforming and eliminate the underperforming; also, the evolution explores large solution space and reproduces the best solutions for next generation. In this manner, the parallelism, competition, and evolution are organized in an easy-to-use algorithm and enable the expansibility, adaptivity, and exploration abilities, respectively. The Palace is examined on the classic and real-world Benchmarks about the OP, the time-dependent/independent OP with time windows, and the unmanned aerial vehicle and agile earth observation satellite planning. As a result, the Palace shows good performance in applicability and effectiveness in comparison with the state-of-the-art algorithms.

The article delves into the intricate phase transitions of 1-Octadecanol and n-Nonadecane within a binary system, unveiling dynamic structural changes under varying conditions. Through Fouri-er-transform infrared (FTIR) analysis, specific molecular vibrations were identified, shedding light on the molecular composition and interactions. The study highlights the challenges in detecting subtle phase transitions and emphasizes the individuality of molecular behaviours in closely related compounds. The findings underscore the complexity of phase transitions in binary systems and advocate for a nuanced approach to studying molecular structures and behaviours. Addi-tionally, the research contributes valuable insights into the molecular dynamics of Organic Polymer Functional Adsorption Materials, offering implications for synthetic waxy layers in plant epidermis.

COX II containing a dual core CuA active site is one of the three core subunits of mitochondrial Cco, which plays a significant role in the physiological process. In this report, the full-length cDNA of COXⅡ gene was cloned from Sitophilus zeamais, which had an ORF of 684 bp encoding 227 amino acids residues. The predicted COXⅡ protein had a molecular mass of 26.2 kDa with pI value of 6.37, and multiple sequence alignment and phylogenetic analysis indicated that Sitophilus zeamais COXⅡ had high sequence identity 78.51% with the COXⅡ of other insect species, especially similarity to sitophilus oryzae. This gene was subcloned into the prokaryotic expression vector pET-32a, and induced by IPTG in E.coli Transetta (DE3) expression system. Finally the COXⅡ with 6-His tag was purified using affinity chromatography with Ni²⁺-NTA agarose. WB showed the recombinant COXⅡ was about 44 kD, and the concentration of fusion protein was 50μg/mL. UV-spectrophotometer and infrared spectrometer analysis showed that recombinant COXⅡ could catalyze the oxidation of substrate Cytc, and influenced by AITC. It was found that AITC could form a hydrophobic region with COXⅡ protein via molecular docking, besides, a sulfur atom of AITC structure could form a length of 2.9 Å hydrogen bond with Leu-31. These results will provide valuable information for elucidating the role of COXⅡ in Sitophilus zeamais responses to AITC, meanwhile, it will helpful to carry out a point mutation in AITC binding sites for the future research.

An ultra-low anti-reflection optical coating on both surfaces of a plastic cover slip was studied for use in confocal image measurement. The optical reflectance at a wavelength of 632.8 nm was less than 0.1% when the coated sample was placed in a liquid having a refractive index of 1.34 close to the aqueous solution of the biomaterial. The high- and low-index coating films, Substance-2 (PrTiO3) and silicon dioxide (SiO2), were measured by an ellipsometer to determine their optical refraction indices and extinction coefficients. Theoretically, when the two layer thicknesses are designed using the optical admittance diagram of the cover slip to approach the equivalent index of 1.34, a reflectance of 1.6×10-5% in the liquid could be obtained. Experimentally, the reflectance of the sample deposited on the two faces of the cover slip was 4.223±0.145% as measured in the air; and 0.050±0.002% as measured by a He-Ne laser in the liquid.

The last decade has witnessed rapid development of immersive virtual reality (IVR) and its application in various contexts. However, its application in supporting real-time virtual collaboration has been quite rare due to technical barriers and the lack of validated design principles. To address this research gap, this study designed and developed an IVR space to enable multi-user synchronous co-located collaboration. An evaluation study (N = 95) was conducted to explore its useful design considerations and the influencing factors for collaboration experience. The IVR space was enabled by the simultaneous localization and mapping (SLAM)-based inside-out tracking technique and was informed by four essential design considerations for promoting effective collaboration in IVR, namely, the role script, learning task, collaboration mechanism, and communication design. The study results revealed that students in general were satisfied with their collaboration experience in IVR, with social presence and collaboration competency as significant predictors of collective efficacy and social experience. Based on both quantitative and qualitative results, this study proposes four validated principles for designing effective IVR spaces to support synchronous co-located collaboration.

The present paper investigates numerically the resistance at full-scale of a zero-emission, high-speed catamaran in both deep and shallow water, with the Froude number ranging from 0.2 to 0.8. The numerical methods are validated by two means: a) comparison with available model tests; b) a blind validation using two different flow solvers. The resistance, sinkage and trim of the catamaran, as well as the wave pattern, longitudinal wave cuts and cross-flow fields, are examined. The total resistance curve in deep water shows a continuous increase with the Froude number while in shallow water, a hump is witnessed near the critical speed. This difference is mainly caused by the pressure component of total resistance, which is significantly affected by the interaction between the wave systems created by the demihulls. The pressure resistance in deep water is maximised at a Froude number around 0.58, whereas the peak in shallow water is achieved near the critical speed (Froude number ≈ 0.3). Insight into the underlying physics is obtained by analysing the wave creation between the demihulls. Profoundly different wave patterns within the inner region are observed in deep and shallow water. Specifically, in deep water, both crests and troughs are generated and moved astern as the increase of the Froude number. The maximum pressure resistance is accomplished when the secondary trough is created at the stern, leading to the largest trim angle. In contrast, the catamaran generates a critical wave normal to the advance direction in shallow water, which significantly elevates the bow and creates the highest trim angle as well as pressure resistance. Moreover, significant wave elevations are observed between the demihulls at supercritical speeds in shallow water which may affect the decision for the location of the wet deck.

Aim: Aging is companied by deteriorations of insulin resistance (IR) and insulin secretion. However, little is known about the roles of aging on different phases of insulin secretion (ISEC); i.e., the first- and second-phase of insulin secretion (FPIS, SPIS) and glucose effectiveness (GE). Methods: Totally 169 individuals (43 men and 126 women) with the similar fasting plasma glucose (FPG: 90 mg/dL) and BMI (men: 23 kg/m2, women 22 kg/m2) were enrolled. IR, FPIS, SPIS, and GE were estimated using our previously developed equations shown below. Pearson correlation analysis was conducted to assess the correlations between age and four diabetes factors (DFs: IR, FPIS, SPIS and GE). The equations that are used to calculate the DF in the present study were built and published by our group. Results: The age of the participants ranged from 18- to 78-year-old. Men had higher FPIS but lower HDL-C levels than women (2.067±0.159, 1.950±0.186 μU/min and 1.130±0.306, 1.348±0.357 mmol/dl, accordingly). The results of Pearson correlation revealed that age was negatively related to IR and GE in both genders (IR: r = -0.39, p < 0.001 for men, r = -0.24, p < 0.003 for women; GE: r = 0.66, p < 0.001 for men, r = 0.78, p < 0.001 for women). In the meanwhile, FPIS was also only found to be negatively correlated with age in female (r = -0.238, p = 0.003). But there was no different with SPIS and age in both of genders. Conclusions: We have found that in Chinese with normal FPG level (90 mg/dl) and body mass index (men: 23 kg/m2, women: 22: kg/m2), age is negatively related to IR and GE in both genders. At the same time, only FPIS was found to be negatively related to age in women. The tightness of their relationships, from the highest to the lowest are, GE, FPIS and IR accordingly. The importance of GE should be re-evaluated. These results should be interpreted with caution because of the small sample size.

Transition-metal-free synthesis of 4-pyrones via TfOH-promoted nucleophilic addition/cyclization of diynones and water has been developed. This transformation is simple, atom economical and environmentally benign, providing rapid and efficient access to substituted 4-pyrones.

Sinojackia Hu. comprises five to eight Chinese endemic species with high ornamental and medicinal value. However, the generic limits, interspecific relationships and evolutionary history of the genus remain unresolved. In this study, we newly sequenced and assembled three plastomes of S. oblongicarpa and compared them with those of the other congeneric species to explore the taxonomic delimitation of the species and the evolutionary history of the genus. Plastomes structure of Sinojackia species were extremely conserved in terms of number of genes, sequence length and GC content. Codon usage patterns revealed that natural selection may be the main factor shaping codon usage bias. Our phylogenetic tree shows that Sinojackia is monophyletic and can be divided into two clades. Sinojackia oblongicarpa as a distinct species is supported for it is distantly related to S. sarcocarpa. The evolutionary analysis of morphological features indicates that woody mesocarp is an ancestral feature, while mesocarp undeveloped, spongy and fleshy are the later derived. Sinojackia originated in Central-Southeast China during the early Miocene. In this period, it experienced elevated diversification and migrated from the Central-Southeast China to Hunan Province and Sichuan Province with the development of the Asian monsoon and East Asian flora. Sinojackia experienced elevated diversification at intraspecies levels that mainly occurred in the Quaternary. Glacial-interglacial interactions with the monsoon climate may provide favorable expansion conditions for Sinojackia on a small-scale.

Underwater visual detection technology plays a pivotal role in fields such as marine exploration. With the increasing demand for underwater monitoring, the quest for efficient and reliable methods for underwater target recognition has become particularly significant. To address this requirement, this study developed an innovative underwater object detection architecture based on YOLOv8, named YOLOv8-MU, aimed at significantly enhancing detection accuracy.By integrating the LarK module proposed in UniRepLKNet to optimize the backbone network, YOLOv8-MU aims to achieve a larger receptive field without increasing the model’s depth. Further, this research introduces C2fSTR, an innovative method that combines Swin Transformer with the C2f module. Additionally, we have incorporated the SPPFCSPC_EMA module, which combines Cross-Stage Partial Fast Spatial Pyramid Pooling (SPPFCSPC) with attention mechanisms, significantly improving the detection accuracy and robustness of various biological targets. Moreover, by introducing a fusion block based on DAMO-YOLO into the neck of the model, we further enhanced the model’s capability in multi-scale feature extraction. Finally, the adoption of the MPDIoU loss function, designed around vertex distance, effectively tackles the challenges of localization accuracy and boundary clarity in underwater organism detection. Experimental results on the URPC2019 dataset demonstrate that the YOLOv8-MU model achieved an [email protected] of 78.4%, marking improvements of 5.6%, 1.1%, and 4.0% over YOLOv5s, YOLOv7, and YOLOv8n respectively, indicating the leading performance (SOTA) of this method. On the other hand, further evaluation on the URPC2020 dataset confirmed the generalization capability of the YOLOv8-MU architecture, with its [email protected] reaching 80.4%, surpassing various models including YOLOv5x and YOLOv8n, showcasing the wide applicability of our proposed improved model architecture.

Controlling surface-protein interaction during wastewater treatment is the key motivation for developing functionally modified membranes. A new biocatalytic thermo-responsive poly(vinylidene fluoride)(PVDF)/nylon-6,6/poly(N-isopropylacrylamide)(PNIPAAm) ultrafiltration membrane was fabricated to achieve dual functionality of protein-digestion and thermo-responsive self-cleaning. The PVDF/nylon-6,6/PNIPAAm composite membranes were constructed by integrating a hydrophobic PVDF cast layer and hydrophilic nylon-6,6/PNIPAAm nanofiber layer where trypsin enzymes were covalently immobilized. The immobilization density of enzymes on the membrane surface decreased with increasing PNIPAAm concentration, due to the decreased number of amine functional sites. Through a ultrafiltration study using a model solution containing BSA/NaCl/CaCl₂, the PNIPAAm containing biocatalytic membranes demonstrated a combined effect of enzymatic and thermo-switchable self-cleaning. The membrane without PNIPAAm revealed superior fouling resistance and self-cleaning with an R_PD of 22%, compared to membranes with 2 and 4 wt% PNIPAAm with 26% and 33% R_PD, respectively, after an intermediate temperature cleaning at 50°C, indicating that higher enzyme density offers more efficient self-cleaning than the combined effect of enzyme and PNIPAAm at low concentration. The conformational volume phase transition of PNIPAAm did not affect the stability of immobilized trypsin on membrane surface. Such novel surface engineering design offer a promising route to severe surface-protein contamination remediation in food and wastewater applications.

Hierarchical tungsten oxide assemblies such as spindle-like, flowers with sharp petals, nanowires and regular hexagonal structures are successfully synthesized via a solvothermal reduction method by simply adjusting the reaction conditions. On the basis of the experimental results, it is determined that the reaction time significantly influences the phase transition, microstructure and photocatalytic activity of the prepared samples. The possible mechanisms for the phase transition and morphology evolution process have been systematically proposed. Moreover, the as-prepared products exhibit significant morphology-depended photocatalytic activity. The flower-like W18O49 prepared at 6 h possesses large specific surface area (150.1 m²g^-1), improved separation efficiency of electron-hole pairs and decreased electron-transfer resistance by the photoelectrochemical measurements. As a result, the flower-like W₁₈O₄₉ prepared at 6 h exhibits the highest photocatalytic activity for the degradation of Methyl orange aqueous solution. The radical trap experiments showed that the degradation of MO was driven mainly by the participation of h⁺ and •O²⁻ radicals.

Parental phubbing behavior is a significant factor in predicting adolescent smartphone dependence, but prior research has predominantly focused on a unidirectional perspective from the child's viewpoint, overlooking potential perceptual differences between parents and their children regarding parental phubbing. Therefore, are there differences in the perceptions of parental phubbing between parents and their children? Based on the "Discrepancy-Maladaptive" hypothesis, the presence of perceptual discrepancies in family factors can lead to adverse developmental outcomes in children. Does the parent-child perceptual discrepancy in parental phubbing influence adolescent smartphone dependence? And what role does parent-child relationship play in this context? This study selected 728 families from a middle school in Wuhan, and surveys were administered to both children and parents. The findings reveal: (1) There exist significant parent-child perceptual discrepancies in parental phubbing. (2) Parent-child perceptual discrepancies in parental phubbing significantly positively predict adolescent smartphone dependence and negatively predict parent-child relationships, while parent-child relationships significantly negatively predict adolescent smartphone dependence. (3) The parent-child relationship plays a mediating role between parent-child perceptual differences in parental phubbing behavior and adolescent smartphone dependence.

The composition, structure and functionalities of prolamins from highland barley was investigated. These parameters of was compared with the widely applied prolamins (zein). There are more charged and hydrophilic amino acids in prolamins from highland barley than zein. The molecu-lar weight of prolamins from highland barley were between 30 to 63 kDa, which was larger than zein (20 to 24 kDa). β-turn helices is the main secondary structure in prolamins from highland barley, while α-helical structure is the main secondary structure in zein. The water holding capacity, thermal stability, emulsifying capacity and stability of prolamins from highland barley is quite lager than zein, while opposite results can be observed for oil absorption capacity. The diameter of fibers prepared with prolamins from highland barley was almost 6 times that of zein, while ribbon structures rather than fibers were formed by prolamins from highland barley. The results would provide the guidance for application of prolamins from highland barley.

Randomized block Kaczmarz Method and randomized extended block Kaczmarz Method are proposed for solving matrix equation AXB=C, where the matrix A and B may be full rank or rank deficient. These methods are iterative methods without matrix multiplication, and are especially suitable for solving large-scale matrix equations. It is theoretically proved these methods converge to the solution or least square solution of the matrix equation. The numerical results show that these methods are more efficient than the existing algorithms for high-dimensional matrix equations.

Based on the sensitive sum frequency generation cross-correlation frequency-resolved optical gating (SFG-XFROG) measurement setup, besides the pulse broadening, blue shift, red shift and obvious pulse acceleration, we observed the soliton evolution when the low energy soliton pulse with wavelength of 1555nm transmit through the Si photonic crystal waveguide. The measurements were nicely matched with the simulation results, which are achieved with an optimized nonlinear Schrödinger equation (NLSE) modeling. The effects of various parameters of the silicon photonic crystal waveguides and the incident pulses on the pulse transmission were also analyzed, including the nonlinear effects and dispersion such as the self-phase modulation (SPM), self-steepening (SS) and intra-pulse Raman scattering(IRS). The results help us understand further the ultra-fast nonlinear dynamics of soliton in silicon-based waveguides, and even open a novel way for soliton-based functional elements in CMOS-compatible platforms.

Based on screening in computational biology and biological in vitro assays, five natural products isolated from extracts of the herbal medicine toad skin, such as cinobufagin (CBFi), bufalin (BFi), arenobufagin (ABFi), telocinobufagin (TBFi), bufotalin (BFTi), were subjected to molecular docking calculations with the use of SARS-CoV-2 main protease (PDB 6LU7 and 7BTF) and top-scoring ligand-receptor complexes were obtained. The results showed that the binding energy of ABFi to the 3CL protein was -17.044kcal/mol, which was higher than CBFi and TBFi. However, the binding energy of ABFi to the RdRp protease was -23.250 kcal/mol, which was much lower than that of CBFi and TBFi, EVEN lower than that of ABFi to the 3CL protein. ABFi also has polar interactions with amino acids such as Glu811, Ser814, Ser681 and Thr680 of RdRp enzyme. The results revealed that ABFi had a moderate inhibitory effect on the cell proliferation of SARS-CoV-2 in vitro, with an inhibition rate of 61.12%, even weaker than Remdesivir. This new discovery provides us with new ideas for in-depth studies on the development of natural products with this class of structural generalizations as inhibitors of SARS-CoV-2, and provides an experimental basis for the next step of mechanistic studies.

The prediction of stock prices holds significant implications for researchers and investors in evaluating stock value and risk. In recent years, researchers have increasingly replaced traditional machine learning methods with deep learning approaches in this domain. However, the application of deep learning in forecasting stock prices is confronted with the challenge of overfitting. To address the issue of overfitting and enhance predictive accuracy, this study proposes a stock prediction model based on GRU (Gated Recurrent Unit) with reconstructed datasets. This model integrates data from other stocks within the same industry, thereby enriching the extracted features and mitigating the risk of overfitting. Additionally, an auxiliary module is employed to augment the volume of data through dataset reconstruction, thereby enhancing the model’s training comprehensiveness and generalization capabilities. Experimental results demonstrate a substantial improvement in prediction accuracy across various industries.

Lithium batteries are widely used due to their advantages such as high energy density, stable performance, low pollution, and long recyclable life. Accurate SOC estimation is important for the use of lithium batteries. To address the problem of low accuracy of SOC estimation by traditional methods, this paper proposes a joint method of fractional order robust unscented Kalman filter (FORUKF) and robust unscented Kalman filter (RUKF) to estimate SOC. The method is based on a fractional order model (FOM) that combines the unscented transformation (UT) technique, the H∞ observer and the joint estimator. Specifically, an adaptive genetic algorithm (AGA) was first used to identify the parameters of the FOM for lithium batteries and to verify the accuracy of the model. Estimation and updating of the ohmic resistance R0 and the capacity QN in the model in real-time by RUKF and then estimation of the SOC by FORUKF. Finally, the accuracy of FORUKF-RUKF was verified under the Federal Urban Driving Schedule (FUDS), US06 Highway Driving Schedule and Beijing Dynamic Stress Test (BJDST). According to the results, the FORUKF-RUKF estimated SOC was found to have better accuracy and robustness than the RUKF, FOUKF and EKF.

Taking a certain type of test centrifuge as the research object, the finite element model of the test centrifuge is established, the vibration characteristics and aerodynamic performance of the test centrifuge are analyzed, and the structural optimization design of the test centrifuge is carried out. In this paper, the load is applied according to the actual working condition of a certain type of test centrifuge. The vibration of the mounting seat of the test centrifuge is analyzed and the structure of the mounting seat is optimized. After optimization, the vibration of the mounting seat is 77.38 % lower than that of the original mounting seat. Then, the aerodynamic analysis of the test centrifuge is carried out. The analysis results show that the test centrifuge moves more smoothly under the whole package shell and the steady flow shell, and the resistance decreases and the shaft load decreases. Finally, the steady flow shell of the test centrifuge is optimized. The analysis shows that the increase of the width of the steady flow shell can reduce the resistance coefficient, which is helpful to the stability of the test centrifuge during operation and reduces the unbalanced response of the system caused by air resistance.

The rational design of magnetic carbon composites, encompassing both composition and microstructure, holds significant potential for achieving exceptional electromagnetic wave absorbing materials (EAMs). In this study, FeCo@CM composites was efficiently fabricated through an advanced microwave plasma assisted reduction chemical vapor deposition (MPARCVD) technique, offering high efficiency, low cost, and energy-saving benefits. By depositing graphitized carbon microspheres, the dielectric properties were significantly enhanced, resulting in improved electromagnetic wave absorption performances through optimized impedance matching and a synergistic effect with magnetic loss. A systematic investigation revealed that the laminar-stacked structure of FeCo exhibited superior properties compared to its spherical counterpart, supplying a higher number of exposed edges and enhanced catalytic activity, which facilitated the deposition of uniform and low-defect graphitized carbon microspheres. Consequently, the dielectric loss performance of the FeCo@CM composites was dramatically improved due to increased electrical conductivity and the formation of abundant heterogeneous interfaces. At a 40 wt% filling amount and a frequency of 7.84 GHz, the FeCo@CM composites achieved a minimum reflection loss value of -58.2 dB with an effective absorption bandwidth (fE) of 5.13 GHz. This study presents an effective strategy for developing high-performance EAMs.

To improve the tangerine crop yield, the work of recognizing and then disposing of specific pests is becoming increasingly important. The task of recognition is based on the features extracted from the images that have been collected from websites and outdoors. Traditional recognition and deep learning methods, such as KNN (k-nearest neighbors) and AlexNet, are not preferred by knowledgeable researchers, who have proven them inaccurate. In this paper, we exploit four kinds of structures of advanced deep learning to classify 10 citrus pests. The experimental results show that Inception-ResNet-V3 obtains the minimum classification error.

Background: Pro-golfers are increasingly trained scientifically, but swing technique characteristics have not yet been conclusively determined for golf performance. We investigated the relationship between the player's thorax, pelvis and club based on a wireless biofeedback system. We also determined whether thoracic and pelvic changes during different swing phases have different effects on ball striking. Methods: Eight male professionals performed 10 successful full-swing shots using a 5-iron and applied the K-vest wireless biofeedback system for analysis. Results: Peak angular velocities between the pelvis, torso, and clubs were all significantly different (p&lt;0.05) in the men's professional players. All players deviated more from the PGA players range metrics during the preparation stance. Excessive lateral pelvic bending angle, over-rotation, and hyperextension of the trunk were prevalent at the top of the backswing. Conclusions: Most players have an irrational sequence of pelvic, trunk and club rotation times, which is not conducive to improving club head speed and distance. Excessive pelvic rotation in the closed direction at the apex of the backswing is not conducive to maximizing the X-factor. At the moment of striking the ball, maintain a moderate forward trunk lean and full trunk rotation to avoid sports injuries.

Multiple sequence alignments and phylogenetic trees are rich in biological information and are fundamental to research in biology. PhyKIT is a tool for processing and analyzing the information content of multiple sequence alignments and phylogenetic trees. Here, we describe how to use PhyKIT for diverse analyses, including (i) constructing a phylogenomic supermatrix, (ii) detecting errors in orthology inference, (iii) quantifying biases in phylogenomic data sets, (iv) identifying radiation events or lack of resolution using gene support frequencies, and (v) conducting evolution-based screens to facilitate gene function prediction. Several PhyKIT functions that streamline multiple sequence alignment and phylogenetic processing—such as renaming FASTA entries or tree tips—are also discussed. These protocols demonstrate how simple command-line operations in the unified framework of PhyKIT facilitate diverse phylogenomic data analysis and processing, from supermatrix construction and diagnosis to gene function prediction.

In order to develop novel botanical insecticides, the joint action of Ligusticum chuanxiong oil (LCO) and lemongrass oil (LO) against Aphis citricola van der Goot was determined systematically indoors and outdoors. The chemical profiles of LCO and LO as determined by gas chromatography- mass spectrometry analysis revealed that main compounds from LCO were Z-Ligustilide (44.58%) and Senkyunolide A (26.92%), and that of LO were geranial (42.16%) and neral (32.58%), respectively. The mixture of LCO and LO showed significant synergy against A. citricola, with a common-toxicity coefficient (CTC) value of 221.46 at the optimal ratio of LCO to LO (4: 1, w/w). Based on the results of solvents and emulsifiers screening, L. Chuanxiong oil · Lemongrass oil 20% emulsifiable concentrate (20% LCO · LO EC) was developed, which was confirmed to meet the requirements of a commercial pesticide by quality test. Field trials indicated that the insecticidal activity of the diluted 20% LCO · LO EC (1000 fold dilution) was comparable to conventional pesticide (20% imidacloprid EC) on A. citricola 7 days after application. Thus, the mixture of LCO and LO has the potential to be further developed as a botanical pesticide.

Electric heating and solid thermal storage system (EHSTSS) is widely used in district clean heating and the flexibility adjustment of combined heat and power (CHP) unit. It has been an effective way to absorb renewable energy. Aiming at the thermal design calculation and experimental verification of EHSTSS, the thermal calculation and the heat transfer characteristics of the EHSTSS are investigated in this paper. Firstly, a thermal calculation method for the EHSTSS is proposed in the paper. The calculation flow and calculation method for key parameters of heating system, heat storage system, heat exchange system and fan-circulating system in the EHSTSS are studied. Then, the instantaneous heat transfer characteristics of the thermal storage system (TSS) in the EHSTSS are analyzed, and the heat transfer process of ESS is simulated by FLUENT software. The uniform temperature distribution in the heat storage and release process of the TSS verifies the good heat transfer characteristics of the EHSTSS. Finally, EHSTSS test verification platform is built, and the historical operation data of the EHSTSS is analyzed. During the heating and release thermal process, the maximum temperature standard deviation of each temperature measurement point is 28.3℃ and 59℃respectively. The correctness of the thermal calculation of the EHSTSS is verified.

This study provides an in-depth examination of the binary system of n-Nonadecane and 1-Octadecanol, representative of plant cuticular waxes. It emphasizes the crystallization and phase transitions in this hydrocarbon mixture. Using Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared (FTIR) spectroscopy, the research uncovers detailed thermal properties and phase behaviors. The findings reveal the distinct phase transitions and enthalpy changes of each component in the binary system. This research is significant for its implications in under-standing the structural properties of plant waxes. Such insights are crucial for enhancing the effi-ciency of fertilizer and pesticide absorption in plant leaves, with broad applications in bionics and materials science. This study not only furthers the understanding of identifying specific phase transitions for each compound, facing challenges in detecting subtle changes using DSC. The re-search enhances understanding of plant cuticle waxes through FTIR analysis, revealing intricate molecular interactions and structural complexities. but also opens avenues for improved agri-cultural practices and material engineering, potentially influencing future innovations in these fields.

The objective of this investigation was to enhance the sensory appeal of Cerasus humilis (C. humilis) juice and ascertain potential interactions among bioactive compounds within a functional juice matrix. Sensory attributes, color, antioxidant potential, polyphenol and vitamin C (VC) concentrations, and sugar levels were assessed. Diverse dosage combinations were examined to determine their impact on the quality of both C. humilis and Green grape juices. Among the formulations, CG5 exhibited elevated antioxidant activit y and polyphenol content (455.02 mg TE/100 ml and 173.1 mg/100 ml, respectively), coupled with favorable consumer preference. Notable variations in compound content were observed across the seven analyzed juices. In the blended juices (CG1–CG5), interactions between distinct juices influenced VC and sugar levels, with other bioactives contributing to beneficial modifications, displaying a progressive rise. This study innovatively crafted delectable and convenient C. humilis juice, upholding its intrinsic high antioxidant activity, thereby presenting a novel avenue for marketable functional juice offerings.

Remote sensing image registration plays an important role in military and civilian fields, such as natural disaster damage assessment, military damage assessment and ground targets identification, etc. However, due to the ground relief variations and imaging viewpoint changes, non-rigid geometric distortion occurs between remote sensing images with different viewpoint, which further increases the difficulty of remote sensing image registration. To address the problem, we propose a multi-viewpoint remote sensing image registration method which contains the following contributions. (i) A multiple features based finite mixture model is constructed for dealing with different types of image features. (ii) Three features are combined and substituted into the mixture model to form a feature complementation, i.e., the Euclidean distance and shape context are used to measure the similarity of geometric structure, and the SIFT (scale-invariant feature transform) distance which is endowed with the intensity information is used to measure the scale space extrema. (iii) To prevent the ill-posed problem, a geometric constraint term is introduced into the L2E-based energy function for better behaving the non-rigid transformation. We evaluated the performances of the proposed method by three series of remote sensing images obtained from the unmanned aerial vehicle (UAV) and Google Earth, and compared with five state-of-the-art methods where our method shows the best alignments in most cases.

Baculovirus is a type of virus with a double stranded, circular, and super helical DNA structure, whose transcription, replication and assembly of offspring virus occur in the nucleus of the cell. However, due to the natural barrier of the cellular nuclear membrane, macromolecular substances larger than 40-60 kDa cannot directly penetrate the nuclear membrane. Therefore, baculovirus have evolved various strategies to achieve transmembrane transport of viral proteins. This article attempts to review the recent literature on mechanisms by which the DNA baculoviruses of insects transport proteins into the infected host cell nucleus. In this article, we summarise the studies of nuclear localisation signals(NLSs) in baculovirus, which are involved in the classical nuclear import pathways and review the non-classical nuclear transport pathways independent on NLS derived from baculovirus. Moreover, during the protein nuclear transport process, viruses will regulate the nuclear pathway through protein modifications. Host structure changes and other methods will create a favorable environment for the nuclear transport of viral proteins.

The orthogonal matrix with cube be symmetric is a common class of matrices with important properties. We pay attention to this kind of matrices. By using the close relationship between the eigenvalues of a matrix and the trace of its power, we obtain the algorithm for its all possible different eigenvalues and multiplicities. The calculation formula is expressed only by the trace of a matrix and its power, avoiding solving the characteristic polynomial. The method is simple and practical. Furthermore, a new essential characterization for the sum of orthogonal matrix pairs being orthogonal is given as well.

To improve the effect of multi-point stretch forming of sheet metal, it is proposed in this paper to replace fixed ball head with swinging ball head. According to the multi-point dies with different arrangements, this research establishes the finite element models of the following stretch forming, i.e. fixed ball heads with conventional arrangement, swinging ball heads with conventional arrangement, swinging ball heads with declining staggered arrangement, and swinging ball heads with parallel staggered arrangement and then numerical simulation is performed. The simulation results show that by replacing fixed ball head with swinging ball head, the surface indentation of the formed part was effectively suppressed, the stress and tension strain distribution of the formed part was improved and the forming quality was improved; that the thickness of the elastic pad was reduced, the springback was reduced and the forming accuracy was improved; and that when the ball head was applied to multi-point die with staggered arrangement, better forming result was achieved, where the best forming result was achieved in combining the swinging ball heads with the multi-point die with parallel staggered arrangement. The forming experiments were carried out, and the experimental results were consistent with the trend of numerical simulation results, which verified the correctness of the numerical simulation.

Huntington's disease (HD) is caused by an expansion of a CAG repeat in the gene that encodes the huntingtin protein (HTT). The exact function of HTT is still not fully understood, and previous studies have mainly focused on identifying proteins that interact with HTT to gain insights into its function. Numerous HTT-interacting proteins have been discovered, shedding light on the functions and structure of HTT. Most of these proteins interact with the N-terminal region of HTT. Among the various HTT-interacting proteins, huntingtin-associated protein 1 (HAP1) and HTT-interacting protein 1 (HIP1) have been extensively studied. Recent research has uncovered differences in the distribution of HAP1 in monkey and human brains compared to mice. This finding suggests that there may be species-specific variations in the regulation and function of HTT-interacting proteins. Understanding these differences could provide crucial insights into the development of HD. In this review, we will focus on the recent advancements in the study of HTT-interacting proteins, with particular attention to the differential distributions of HTT and HAP1 in larger animal models.

Cambodia faces the challenge of managing excess water during the wet season and insufficient water during the dry season. This harms human life and endangers aquatic and natural resources, agricultural practices, and food security. In order to ensure the well-being of both people and food security, water governance is crucial. However, Cambodia's water governance is hindered by various obstacles, including sectoral and centralized influences, top-down and large-scale strategies, a lack of coordination among relevant agencies, and limited involvement of local communities. This study delves into water governance across different sectors, from centralized to community-based natural resources management to tackle these challenges. Through analyzing literature and case studies of farmer water user communities (FWUC), community fisheries (CFis), and community fish refuges (CFRs) in three Mekong Delta provinces in Cambodia, the study concludes that although water governance has improved, it has resulted in a decline in fishery resources from rivers and water bodies and an increase in water conflicts among farmers and sectors in the face of climate change. To enhance water governance in Cambodia, it is critical to integrate it at the district level. This will promote sustainable water use and management across the country and pave the way for a brighter future.

The rampant misuse of drones poses a serious threat to national security and human life. Currently, the CNN method has been widely used in drone detection. However, there is a challenge that traditional CNN cannot cope with, which is small drone targets often have reduced amplitude or even lost features in infrared images. This paper proposes a Progressive Feature Fusion Network (PFFNet) that gradually increases the response amplitude of the target in the deep network. The Feature Selection Model (FSM) is designed to improve the utilisation of the output coding graph and enhance the feature representation of the target in the network. A lightweight segmentation head is also designed to achieve progressive feature fusion with multi-layer outputs. Experimental results show that the proposed algorithm can achieve low duration and high accuracy in drone target detection. On the public dataset, the IoU is improved by 2.53% and the detection time is reduced by 81.03%.

This study examined the use of high dosages of ultraviolet germicidal irradiation (UVGI) (253.7 nm) to deal with various concentrations of air pollutants, such as formaldehyde (HCHO), total volatile organic compounds (TVOC), under various conditions of humidity. We also estimated the emission of ozone as a secondary pollutant of UVGI as treatment. A number of irradiation methods were applied for various durations in field studies to examine the efficiency of removing HCHO, TVOC, bacteria, and fungi. The removal efficiency of air pollutants (HCHO and bacteria) through long-term exposure to UVGI appears to increase with time. The effects on TVOC and fungi concentration were insignificant in the first week; however, improvements were observed in the second week. No differences were observed among the various irradiation methods in this study regarding the removal of HCHO and TVOC; however significant differences were observed in the removal of bacteria and fungi.

Retrogressive thaw slumps (RTSs) are becoming more common on the Qinghai-Tibet Plateau as permafrost thaws, but the hydraulic characteristics of these slumps have not been extensively studied. To fill this knowledge gap, we used the ''space-for-time substitution method'' to differentiate three stages of RTSs: original grassland, collapsing, and collapsed. Our study included on-site investigations, measurements, and simulated analyses of soil water characteristics, environmental factors, and hydrological properties. Our findings show that the measurements and simulated analyses of soil water characteristics were highly consistent across RTSs, indicating the accuracy of the V-G model in reproducing soil hydraulic parameters for different stages of RTSs. The original grassland stage had the highest soil water retention and content due to its high SOM content and fine-textured micropores. In contrast, the collapsed stage had higher soil water retention and content compared to the collapsing stage, primarily due to increased proportions of soil micropores, SOM content, and lower bulk density (BD). Freeze-thaw cycles had a significant impact on the soil texture and structure of RTSs, resulting in a decrease in SOM content and an increase in BD. However, the absence of soil structure and compaction led to the subsequent accumulation of organic matter, increasing SOM content. Changes in field capacity (FC), permanent wilting point (PWP), and soil micropore distribution aligned with variations in SOM content and water content.These findings highlight the importance of managing SOM content and water content to mitigate the adverse effects of freeze-thaw cycles on soil structure and stability at different stages of RTSs. Effective management strategies may include incorporating organic matter, reducing soil compaction, and maintaining optimal water content. Further research is needed to determine the most suitable management practices for different soil types and environmental conditions.

Helicosporous hyphomycetes is a class of filamentous fungi that shows promising application prospects in metabolizing bioactive natural compounds. During a study of helicosporous fungi in China, six new helicosporous taxa were collected and isolated from decaying wood in Guangxi Zhuang Autonomous Region, China. Morphological comparisons with multi-gene phylogenetic analyses revealed that these six taxa belong to Helicosporium (Tubeufiaceae, Tubeufiales), and they can be recognized as three novel species, named Helicosporium liuzhouense, H. multidentatum and H. nanningense. Detailed descriptions and illustrations of the newly discovered taxa and comparisons with similar fungi are provided. In addition, a list and a key to accepted Helicosporium species are provided.

Questions：SAP in mountainous cities of China serve as crucial carriers for species and wild food, constituting potential green infrastructure. These patches should be recognized as locally specific resources. This study investigates the transformation characteristics of the landscape patterns of SAP, along with their elements, across urban-rural gradients, providing foundational support for the planning of conservation and utilization strategies. Location: Yongchuan area of Chongqing in southwest China. Methods: The study investigated urban-rural gradient-based transformation of SAP. A four-direction transect space was selected and divided into uniform sample squares. Fragstats 4.3 calculated the landscape index of SAP, and Spearman correlation coefficients in SPSS were used to evaluate the influence of landform and artificial factors on agroforestry patch transformation. Results: 1) Patch area (PA), Plaque density (PD), and CLUMPY of SAP systematically transform, showing increased SAP areas and higher connectivity with greater distance from the city, resulting in reduced patch fragmentation. However, Edge density (ED) and Largest plaque index (LPI) exhibit irregular transformation patterns. 2) With increased distance from the city, woodland patch area and connectivity increase, leading to decreased fragmentation, dispersal, and lower fractal dimensions. Conversely, Cultivated land follows the opposite trend. garden land patch area, fractal dimension, fragmentation, and dispersal all increase, while connectivity decreases. 3) Landscape pattern transformations of SPA are significantly influenced by artificial factors. Woodland patches are influenced similarly by landform and artificial factors. In contrast, cultivated land and garden land patches are more significantly impacted by artificial factors. Conclusions: SAP exhibit differentiated conservation and utilization measures across urban-rural gradients. Small patches located far from urban centers may benefit from systematic conservation measures to prevent further fragmentation and erosion in peri-urban areas.

The composite post insulator composed of a large diameter mandrel and flange pressed by one-time integral pultrusion has high strength and good toughness, widely used in the existing flexible converter valve. For constructing the finite element model of the crimped post insulator, most of the flange surface and the mandrel surface are directly connected, making the simulation model's stiffness deviate from the actual model and the model distortion. Based on this, this study proposes a new finite element simplified model of crimped composite post insulator based on Multi-Point Constraints (MPC), which accurately simulates the crimping area of man-drel and flange in engineering practice. It verifies the model's reliability through static tests and characteristic vibration tests. The results show that the difference between the finite element simulation and test results is within 5 %. The finite element modeling method based on MPC local constraints is very reliable in applying crimped composite post insulators. Based on the proposed model, the influence of flange height and thickness on the mechanical properties of composite post-insulators is further explored. The results show that the influence of flange height on mechanical properties can be ignored when the height of the insulator stiff-ener ( non-press common area ) is constant. Within the allowable thickness range of the flange crimping process, the increase in flange thickness will significantly reduce the maximum bend-ing stress of the insulator and increase its safety margin. It provides a good design idea for the design of crimping composite insulators.

Theories of reading comprehension emphasize decoding and listening comprehension as two essential components. The current study aimed to investigate how Chinese character decoding and context-driven auditory semantic integration contribute to reading comprehension in Chinese middle school students. Seventy-five middle school students were tested. Context-driven auditory semantic integration was assessed with speech-in-noise tests in which the fundamental frequency (F0) contours of spoken sentences were either kept natural or acoustically flattened with the latter requiring a higher degree of contextual information. Statistical modelling with hierarchical regression was conducted to examine the contributions of Chinese character decoding and context-driven auditory semantic integration to reading comprehension. Performance on Chinese character decoding and auditory semantic integration scores with the flattened (but not natural) F0 sentences significantly predicted reading comprehension. Furthermore, the contributions of these two factors to reading comprehension were better fitted with an additive model instead of a multiplicative model. These findings indicate that reading comprehension in middle schoolers is associated with not only character decoding but also the listening ability to make better use of the sentential context for semantic integration in a severely degraded speech-in-noise condition. The results add to our better understanding of the multi-faceted reading comprehension in children. Future research could further address the age-dependent development and maturation of reading skills by examining and controlling other important cognitive variables, and apply neuroimaging techniques such as functional magmatic resonance imaging to reveal the neural substrates for the contribution of auditory semantic integration and the observed additive model to reading comprehension.

Interferometric synthetic aperture radar (InSAR) and tomographic SAR measurement techniques are commonly used for the three-dimensional (3D) reconstruction of complex areas, while the effectiveness of these methods relies on the interferometric coherence among SAR images with minimal angular disparities. Radargrammetry exploits stereo image matching to determine the spatial coordinates of corresponding points in two SAR images, and acquire their 3D properties. The performance of the image matching process directly impacts the quality of the resulting digital surface model (DSM). However, the presence of speckle noise, along with dissimilar geometric and radiometric distortions, poses considerable challenges to achieve accurate stereo SAR image matching. To address the aforementioned challenges, this paper proposes a radargrammetric method based on composite registration of multi-aspect SAR images. The proposed method combines coarse registration using scale invariant feature transform (SIFT) with precise registration using normalized cross-correlation (NCC) to achieve accurate registration between multi-aspect SAR images with large disparities. Furthermore, the multi-aspect 3D point clouds are merged by the proposed radargrammetric 3D imaging method, resulting in 3D imaging of target scenes based on multi-aspect SAR images. For validation purpose, this paper presents a comprehensive 3D reconstruction of the Five-hundred-meter Aperture Spherical radio Telescope (FAST) by using Ka-band airborne SAR images. It does not necessitate prior knowledge of the target and is applicable to the detailed 3D imaging of large-scale areas with complex structures. In comparison to other SAR 3D imaging techniques, it reduces the requirements for orbit control and radar system parameters. To sum up, the proposed 3D imaging method with composite registration guarantees imaging efficiency while enhances the imaging accuracy of crucial areas with limited data.

The adulteration of goat milk powder occurs frequently, cattle-derived and soybean-derived ingredients are common adulterants in goat milk powder. However, simultaneously and rapidly detecting cattle-derived and soybean-derived components is still a challenge. high throughput and efficient screening method for adulteration detection is need. In this study, a rapid method was developed to detect the adulteration of common cattle-derived and soybean-derived components simultaneously in goat milk powder by combining the CRISPR/ Cas12a system with recombinant polymerase amplification (RPA). A dual DNA extraction method was employed, primers and crRNA for dual detection were designed and screened, and a series of condition optimizations were carried out in this experiment. The optimized assay can rapidly detect cattle-derived and soybean-derived components in 40 min. The detection limits of both cattle-derived and soybean-derived components were 1% (w/w) for the mixed adulteration models. The established method was applied into a blind survey of 55 commercially available goat milk powder products. The results showed that 36.36% of the samples contained cattle-derived or soybean-derived ingredients, which revealed the noticeable adulteration situation in the goat milk powder market. This study realizes a fast flow of dual extraction, dual amplification and dual detection of cattle-derived and soybean-derived components in goat milk powder for the first time. It can be used for high-throughput and high-efficiency on-site primary screening of goat milk powder adulterants, and provide a technical reference for combating with food adulteration.

Classical laws of friction suggest that friction force is proportional to the normal load and independent of the nominal contact area. As a great improvement in this subject, it is now widely accepted that friction force is proportional to the real area in contact, and much work has been conducted based on this hypothesis. In present study, this hypothesis will be carefully revisited by measuring the friction force and real contact area in-site and real-time at both normal loading and unloading stages. Our experiments reveal that the linear relation always holds between friction force and normal load. However, for the relation between friction force and real contact area, the linearity holds only at the loading stage while fails at the unloading stage. This study may improve our understanding of the origin of friction.

The design, facilities and conditions inside a classroom play a significant role in the teaching and learning experience for both students and lecturers. Prior studies of primary schoolchildren indicate three design principles affecting student learning, namely: naturalness, individualisation and stimulation. The current study extends these investigations to Higher Education through a survey of undergraduate students and university lecturers aimed at determining the most critical factors in undergraduate classroom design. One-to-one interviews were conducted with students and lecturers (n. 31) at the University of Nottingham, Malaysia Campus. Interviewees were encouraged to express their opinions, comments, concerns and suggestions through open-ended questions. The interviews were recorded and then transcribed and coded using NVivo10. Results show a strong desire among lecturers and students for improved classroom equipment, greater flexibility in classroom arrangement, more attractive decoration and for the addition of natural elements to the classroom environment. Of the three design principles, individualisation and naturalness emerged most strongly from the interviews and appear to be more important factors for undergraduates than stimulation. These findings could make a novel and significant contribution to the physical aspects of classroom design in Higher Education settings. Educational institutions are increasingly employing non-traditional classroom designs, which are expected to provide for more flexible, collaborative, and active learning and teaching experiences. Taking into consideration the environmental psychology of teaching and learning, several of the reported design attributes can serve as benchmarks for upgrading current classroom design and facilities in the future, as institutions look to upgrade their physical infrastructures to meet the changing demands of teachers and learners arising from technological innovations and shifts in our understanding of the methods and purposes of Higher Education.

Percutaneous kyphoplasty (PKP) is a highly successful treatment option for Kümmell's disease (KD). Due to the obstruction of the fibrocartilaginous membrane at the periphery of the intervertebral vacuum cleft (IVC) and inadequate osteointegration of conventional bone cement, there is insufficient locking strength between trabecular bone and bone cement in Kümmell's disease (KD), leading to postoperative displacement of the bone cement and sub-sequent early surgical failure. However, there is no standard strategy managing this complica-tion at present. We reported a rare case of premature bone cement displacement resulting in adjacent vertebra fracture. An 80-year-old male with Kümmell's disease at T10 received per-cutaneous kyphoplasty (PKP) with bone cement leaking into the upper disc. Only 3 days after the surgery, the patient complained of severe back pain again. X-ray and MRI showed bone cement displacement at T10, adjacent vertebra fracture at T9. In consideration of poor toler-ance of open surgery for the old patient, we successfully revised by using percutaneous ky-phoplasty with multi-point anchoring technique (A-PKP). During a 10-month postoperative follow-up, the patient reported pain relief. X-ray and three-dimensional CT scan revealed no obvious progress of bone cement displacement. Although the exact mechanism underlying this rare complication remains unclear, we observed that the premature bone cement dis-placement can result in adjacent vertebra fracture especially when the pattern of bone cement is blocky. Percutaneous kyphoplasty with multi-point anchoring technique (A-PKP) appears effective in managing this complication.

Ganoderic Acid (GA), a major bioactive compound isolated from an oriental medicinal mushroom, i.e. Ganoderma tsugae, has traditionally been found to have significant medicinal properties. As a result of GA's poor solubility in water, formulation poses several challenges. Additionally, the traditional method of administering it via alcohol always results in unfavorable patient side effects. In order to overcome these problems, Ganoderma Tsugae extracts obtained by ethanol extraction were encapsulated in nanodispersions by ultrasonic cavitation and solvent evaporation to maximise bioavailability. Resultant nanodispersions contained Ganoderic acid in a hydrophobic core with a mean particle size of no more than 200 nm and a very narrow particle distribution. An analysis of the interactions between the control variables and the process optimisation was conducted using the Response Surface Methodology (RSM). Based on the results of the experiment, it was found that the particle size of nanodispersions was influenced by the Hydrophilic-Lipophilic Balance (HLB) number and the evaporation temperature. Moreover, the physical stability of micellar systems is generally determined by the organic phase within them. Regarding formulation stability, the zeta average of the nanodispersions remained virtually unchanged in solutions with different pH levels and short-term storage (14 days) at room temperature. Overall, it has been demonstrated that Ganoderic acid nanodispersions can be efficiently generated by combining ultrasound cavitation and solvent evaporation.

The Internet of Things (IoT) aims to connect all objects and facilitate data interchange, with data accuracy being paramount. While IoT has seen extensive adoption in conventional sectors, its application in the petroleum industry, especially with downhole equipment, poses challenges due to the extreme high-temperature and high-pressure conditions, making accurate measurements elusive. This Paper we aim to enhance the accuracy of downhole pressure measurements in slim-hole drilling parameter monitoring, mitigate the temperature influences on strain gauges, and surmount the intrinsic limitations of the traditional BP neural network, such as sluggish convergence speeds, high sensitivity to initial weights and biases, unstable learning rates, and a tendency to fall into local minima. This study introduces a temperature compensation model using a chaotic-initiated adaptive whale optimization algorithm (C-I-WOA) to optimize a BP neural network, which is henceforth referred to as the C-I-WOA-BP model. Initially, we harnessed chaotic mapping techniques to refine the initialization process of the whale optimization algorithm (WOA) population, thereby bolstering the heterogeneity of the algorithm. Subsequently, we integrated an adaptive weight recalibration mechanism, refined the encompassing methodology of the WOA, and bolstered its capabilities for expansive global scouting and meticulous local refinement in the solution arena. Subsequently, the WOA was used to optimize the weight coefficients of the BP neural network. Finally, we conducted a detailed comparative analysis by juxtaposing the performance metrics of the BP, C-WOA-BP, I-WOA-BP, and C-I-WOA-BP networks. The experimental results indicate that the C-I-WOA-BP model demonstrates faster convergence speed, superior global search capabilities, and enhanced local exploitation potential compared to the other models. Additionally, it provides a more stable and accurate reduction in temperature-induced errors in drilling pressure parameter measurements.

When ground-penetrating radar is used to detect targets within concrete, the location of the targets, the identification of different shapes, properties and less obvious echoes all greatly increase the interpretation time of the staff and can easily cause misjudgment of the echo images. In this paper, the ground-penetrating radar echo images (B-scan) after processing are mean filtered to eliminate the direct waves that interfere greatly with the echoes. The RFB-s structure is added to the YOLOv3-SPP network structure, while the Anchor value is optimized and the EIOU loss function is introduced. For four types of data with different shapes and properties at random target locations, three models, YOLOv3, YOLOv3-SPP and the improved YOLOv3-SPP, are used for classification and identification, and the proposed algorithm models are comprehensively evaluated using model evaluation metrics. The experimental results show that the algorithm models proposed in this paper have good recognition effect in ground-penetrating radar echo image target detection.

Life Cycle Assessment (LCA) is a widely recognized tool used to evaluate environmental impacts of a product or process, based on the environmental inventory database and bills of material. Data quality is one of the most significant factors affecting the analysis results. However, currently most datasets in inventory databases are generic i.e., they may represent material and energy flow of a process at market average, instead of a specific process used by a manufacturer. As a result, stockholders are unable to track their supply chain to find out the actual environmental impact from each supplier and to compare the environmental performance of alternative options. In this paper, we developed a new framework i.e., blockchain based LCA (BC-LCA), where block-chain technology is adapted to secure and transmit inventory data from upstream suppliers to downstream manufacturers. With BC-LCA, more specific data can be acquired along the supply chain in a real-time manner. Moreover, the availability, accuracy, privacy, and automatic update of inventory data can be improved. A case study is provided based on an industrial supply chain, to demonstrate the utilization of BC-LCA.

Nested structure is a structural feature that is conducive to system stability formed by the co-evolution of species in mutualistic ecosystems, and reflects the ability of ecosystem stability to be restored to a stable state again after being destroyed. The co-opetition relationship and value flow between industrial sectors in the global value chain are similar to the mutualistic ecosystem, and the pattern of the global economic system is always changing in dynamic equilibrium. Nestedness theory is used in this article to define the generalist and specialist sectors in the global value chain to analyze the changes in the global supply pattern. Then we study the mechanism of the global economic system to reach a stable equilibrium and the role of different sectors in the steady of the economic system, so as to provide countermeasures for enhancing the stability of the global economic system. At the end of the article, the domestic trade network, export trade network and import trade network of each country are extracted, and an econometric model is designed to analyze how the microstructure of the production system affects a country’s macroeconomic performance, thereby deriving the conclusion that the stability of the international trade network is crucial to a country's economic development.

Many studies have focused on the impacts of rainfall duration and intensity while overlooking the role of rainfall patterns on intensive tillage erosion in hilly agricultural landscapes. The objective of this study was to determine the combined effects of rainfall patterns and intensive tillage erosion on surface runoff and soil loss on sloping farmland in the purple-soil area of China. Five simulated rainfall patterns (constant, rising, falling, rising-falling, and falling-rising) with the same total precipitation were designed, and the intensive tillage erosion treatment (IT) and no-tillage treatment (NT) were subjected to simulated rainfall using rectangular steel tanks (2 m × 5 m) with a slope of 15°. To analyse the differences in the hydrodynamic characteristics induced by tillage erosion, we calculated the flow velocity (V), Reynolds number (Re), Froude number (Fr), and Darcy-Weisbach resistance coefficient (f). The results indicate that significant differences in surface runoff and soil loss were found among different rainfall patterns and stages (P < 0.05). The falling pattern and falling-rising pattern had faster runoff-initiating times and larger sediment yields than those of the other rainfall patterns. f varied from 0.30 to 9.05 for the IT and 0.48 to 11.57 for the NT and exhibited an approximately inverse trend to V and Fr over the course of the rainfall events. Compared with the NT, the mean sediment yield rates from the IT increased the dynamic range of 8.34%–16.21% among different rainfall patterns. The net contributions of the IT ranged from 2.77% to 46.39% on surface runoff and 10.14%–78.95% on soil loss on sloping farmland. Surface runoff and soil loss were positively correlated with rainfall intensity, V, and Fr but negatively correlated with f irrespective of tillage intensive (P < 0.05). For varying-intensity rainfall patterns, soil and water loss fluctuated during rainfall events, suggesting that the changes in rainfall intensity and tillage intensity would result in drastic variations in soil hydrological characteristics and sediment transport mechanisms. The time sequences of rainfall intensity in each rainfall pattern significantly affected surface runoff, soil erosion, and their contribution rates to total soil and water loss. Moreover, tillage erosion effects on soil and water loss were closely related to rainfall patterns in hilly agricultural landscapes. Our study not only sheds light on the mechanism of tillage erosion and rainfall erosion but also provides useful insights for developing tillage-water erosion prediction models to evaluate soil and water loss on cultivated hillslopes.

Aging and obesity make humans more prone to cardiovascular and metabolic syndrome diseases, leading to several serious health conditions, including dyslipidemia, high blood pressure, and sleep disturbance. Hyperlipidemia means elevated blood lipid levels, including cholesterol and triglycerides. This study aimed to explore the hypolipidemic effect of fermented citrus lemon juice using a hyperlipidemic hamster model. Sugar-free lemon juice’s fermentation was optimized, and the characteristics of fresh and fermented lemon juice (FLJ) were evaluated and compared. In addition, tests were conducted to determine the appropriate hamster feed for the functional animal tests. Then, experiments were conducted to evaluate the hypolipidemic effect of the FLJ, which contained polyphenols and superoxide dismutase-like activity, on a hyperlipidemic hamster model. This study’s pre-fermentation efficiency evaluation found that 21–30 days of bacterial DMS32004 and DMS32005 fermentation of fresh lemon juice provided the best fermentation benefits. In addition, the fermentation evaluation showed that a sugar-free fermentation method provided FLJ with the best benefits. Results showed that the absorption and utilization efficiency of FLJ was higher compared with the unfermented lemon juice. After six weeks of feeding, the total cholesterol and triglyceride values in the blood and liver of the FLJ treatment groups were de-creased compared with the high-fat diet (HFD) group. In addition, the blood low-density lipoprotein cholesterol levels were significantly reduced in the FLJ treatment groups compared with the HFD group. In contrast, the blood high-density lipoprotein to low-density lipoprotein cholesterol ratio increased considerably in the FLJ treatment groups, and the total to high-density lipoprotein ratio was significantly lower than in the HFD group. Compared with the HFD group, the total cholesterol content in the FLJ treatment groups’ feces increased significantly. This study demonstrated that the sugar-free fermentation method and fermentation cycle management provided FLJ with the potential to regulate blood lipids. Further research and verification will be carried out to isolate specific substances from the FLJ and identify their mechanisms of action.

In-situ grown C_0.3N_0.7Ti and SiC, which derived from non-oxide additives Ti₃SiC₂, are proposed to densify silicon nitride (Si₃N₄) ceramics with enhanced mechanical performance. Remarkable increase of density from 79.20% to 95.48% could be achieved for Si₃N₄ ceramics with 5vol% Ti₃SiC₂. The capillarity of decomposed Si from Ti₃SiC₂, and in-situ reaction between nonstoichiometric TiC_x and Si₃N₄ were believed to be responsible for densification of Si₃N₄ ceramics. An obvious enhancement of flexural strength and fracture toughness for Ti₃SiC₂ doped Si₃N₄ ceramics was observed. The maximum flexural strength of 795 MPa for Si₃N₄ composites with 5vol% Ti₃SiC₂ and maximum fracture toughness of 6.97 MPa^.m^1/2 for Si₃N₄ composites with 20vol% Ti₃SiC₂ are achieved when mixed powders are hot-press sintered at 1700℃. Pull out of elongated Si₃N₄ grains, crack bridging, crack branching and crack deflection were demonstrated to dominate enhance fracture toughness of Si₃N₄ composites.

Artificial sweeteners are widely used food ingredients in beverages and drinks to lower calorie intake which in turn prevent lifestyle diseases such as obesity. Epidemiological evidences suggest that an overdose of artificial sweeteners could result to adverse effects after consumption. Thus, our study aims to systematically explore the potential adverse effects of eight commercial artificial sweeteners, including acesulfame-K, alitame, aspartame, sodium cyclamate, dulcin, neotame, saccharin and sucralose on cardiac performances of zebrafish (Danio rerio) and Daphnia as model animals. Embryonic zebrafish and Daphnia were exposed to eight artificial sweeteners at 100 ppb concentrations and their cardiac performance (heart rate, ejection fraction, fractional shortening, stroke volume, cardiac output and heartbeat regularity) were measured and compared. Saccharin significantly increased the heart rate of zebrafish larvae while a significant decrease was observed in Daphnia. Significant increase was also noted in zebrafish heart rate variability after incubation in acesulfame K, dulcin, sodium cyclamate, and sucralose. However, a significant increase in Daphnia was only observed after incubation in dulcin. Based on Principal Component Analysis (PCA) and hierarchical clustering results, several artificial sweetener samples were species-specific to zebrafish and Daphnia. Our study demonstrates the potential adverse physiological effects of artificial sweeteners in cardiovascular systems of zebrafish larvae and Daphnia.