Chemotherapy is a standard therapeutic option for triple-negative breast cancer (TNBC); however, its effectiveness is often compromised by drug-related toxicity and resistance development. Herein, we aimed to evaluate whether an improved antineoplastic effect could be achieved in vitro and in vivo in TNBC by combining dovitinib, a multi-kinase inhibitor, with calcitriol, a natural anti-cancer hormone. In vitro, cell proliferation and cell-cycle distribution were studied by sulforhodamine B-assays and flow cytometry. In vivo, dovitinib/calcitriol effects on tumor growth, angiogenesis and endothelium activation were evaluated in xenografted mice by caliper measures, Itgb3-immunohistochemistry and 99mTc-RGD2-tumor uptake. The drug combination elicited a synergistically improved antiproliferative effect in TNBC-derived cells, which allowed a 7-fold dovitinib dose-reduction. Mechanistically, the co-treatment induced cell death and accumulation in S and G2/M phases, while inhibited tumor growth to a greater extent than each compound alone. Tumor uptake of 99mTc-RGD2 was reduced by dovitinib, suggesting angiogenesis inhibition, which was corroborated by decreased endothelial cell growth and tumor vessel density. In summary, calcitriol synergized dovitinib anticancer effects in vitro and in vivo, allowing for a significant dose-reduction of dovitinib, while maintaining its antiproliferative potency. Our results suggest the beneficial convergence of independent antitumor mechanisms of dovitinib and calcitriol to inhibit TNBC-tumor growth.

This article presents a combined route and path planning strategy to guide Skid-Steer Mobile Robots (SSMRs) in scheduled harvest tasks within expansive crop rows with complex terrain conditions. The proposed strategy integrates: i) a global planning algorithm based on the Traveling Salesman Problem under the Capacitated Vehicle Routing approach and Optimization Routing (OR-tools from Google) to prioritize harvesting positions by minimum path length, unexplored harvest points, and vehicle payload capacity, and ii) a local planning strategy using Informed Rapidly-exploring Random Tree (IRRT*) to coordinate scheduled harvesting points while avoiding low-traction terrain obstacles. The global approach generates an ordered queue of harvesting locations, maximizing the crop yield in a workspace map. In the second stage, the IRRT* planner avoids potential obstacles, including farm layout and slippery terrain. The path planning scheme incorporates a traversability model and a motion model of SSMRs to meet kinematic constraints. Experimental results in a generic fruit orchard demonstrated the effectiveness of the proposed strategy. In particular, the IRRT* algorithm outperformed RRT and RRT* with 96.1% and 97.6% smoother paths, respectively. The IRRT* also showed improved navigation efficiency, avoiding obstacles and slippage zones, making it suitable for precision agriculture.

In this work, a modeling technique utilizing the P-Graph framework was used for a case 1 study involving biomass-based local energy production. In recent years, distributed energy systems 2 gained attention. These systems aim at satisfying energy supply demands, supporting the local 3 economy, decreasing transportation needs and dependence on imports, and in general obtaining a 4 more sustainable energy production process. Designing such systems is a challenge, for which novel 5 optimization approaches were developed to help decision-making. Previous work used the P-Graph 6 framework to optimize energy production in a small rural area, involving manure, intercrops, grass, 7 and corn silage as inputs, and fermenters. Biogas is produced in fermenters, and Combined Heat 8 and Power (CHP) plants provide heat and electricity. A more recent result introduced the concept of 9 operations with flexible inputs in the P-Graph framework. In this work, the concept of flexible inputs 10 was applied to model fermenters in the original case study. A new implementation of the original 11 decision problem was made both as a Mixed-Integer Linear Programming (MILP) model and as a 12 purely P-Graph model by using the flexible input technique. Both approaches provided the same 13 optimal solution, with a 31% larger profit than originally reported.

Computer extended Descriptive Geometry (CeDG) is a new approach to solve and build computer models of three dimensional (3D) geometrical systems through descriptive geometry procedures that have demonstrated reliability and accuracy. CeDG may calculate a parametric algebraic exact form for the spatial curves generated in the intersection of two surfaces, as well as of the flattened pattern of any developable surface involved in those encounters. This study presents first the theoretical foundations and methodology to calculate those parametric algebraic curves. Secondly, a compound hopper is defined and modelled through CeDG (implemented in GeoGebra) and CAD (Solid Edge 2023) approaches to evaluate the advantages of CeDG against CAD. The results demonstrate the robustness and accuracy of the CeDG technique for surfaces intersection and flattening and the advantages of CeDG against Solid Edge 2023 in solving the hopper case study.

The objective of this study is to analyze the assessment practices in primary education and how they relate to the valuation of the learning process. It seeks to understand the perceptions of teachers and students regarding assessment and to observe classroom activities, as well as to analyze the assessment instruments used. The method used is a mixed approach that combines qualitative interpretations of the participants’ realities with a phenomenological analysis to reflect on the evaluative practices. The results indicate a contradiction between what is said and what is done in terms of evaluation, with a tendency to use written tests and traditional exams instead of a combination of techniques that allow for a significant evaluation of student learning. In addition, significant differences are observed among teachers regarding the importance they give to evaluation within their practices and evaluative models.

Count data analysis presents unique challenges due to its discrete nature, often exhibiting excessive zeros and overdispersion. To address these complexities, count models, such as Poisson regression and Negative Binomial regression, have been developed, enabling modeling and prediction of count-based phenomena. Additionally, it’s important to notice that zero inflation, a phenomenon commonly observed in count data, requires specialized techniques for robust analysis. This article provides an overview of count data and count models, explores zero inflation, introduces Likelihood Ratio Tests, and explains how the Vuong Test can be used as a model selection criteria. Furthermore, we created a Vuong Test implementation from scratch using the Python programming language. This implementation enhances the accessibility and applicability of the Vuong Test in real-world scenarios, providing a valuable contribution to the academic community, since Python didn’t have an implementation of this statistical test.

Fiber-cement composites were prepared from cellulosic cotton residue (CCR) arise from sanding process (emerizing). The effect of different concentrations: 0.5% and 1%, and granulometry: thick (retained in a14 mesh sieve) and thin (retained in a 48 mesh sieve) of this residue were evaluated on tensile strength of cement slurries with seven (07) curing days. To characterize the CCR, TGA, FT-IR, SEM and XRD analysis were performed and the residue resistance in an alkaline environment was also evaluated. Splitting tensile strength test, known as Brazilian Test, was used to assess effects of the fibers on the mechanical behavior of cement matrix. Analyzing the results, the CCR proved to be resistant in an alkaline environment, meaning that it can withstand the alkaline environment of cement matrix. The results showed an improvement superior to 17% in tensile strength for 1% of CCR. Therefore, the CCR presents a great application potential in cement pastes used for oil well cementing that requires to increase its tensile strength, once a significant improvement was achieved with a low-residue employee.

The alcoholic fermentation process with agitation/static, followed by the acetic fermentation submerged in banana was evaluated. Kinetics parameters of alcoholic fermentation for the maximum ethanol/glycerol metabolites in agitated process was 29 and 27 h, and in static 47 and 45 h, respectively. For acetic fermentation, the kinetics parameters were medium time of 39.9 h, acetic acid yield of 53.1% and acetic acid productivity of 0.216 g/Lh. Wines from agitated/static process presented 5.73 and 6.81% (v/v) of alcohol content, respectively. Wine obtained by the static process presented higher concentrations of volatile compounds. The vinegar showed 49.2 g/L of acetic acid and the esters concentrations were higher than in wine. The wine and vinegar minerals were consistent with amount observed in the pulp, with an increase in sulphur concentration after alcoholic fermentation and decrease after acetic fermentation. Products showed chemical and composition of sensory and nutritional interest.

Anxiety, chronical stress and depression during pregnancy are considered to affect the offspring, presumably through placental dysregulation. We have studied the term placentae of pregnancies clinically monitored with the Beck’s Anxiety Inventory (BAI) and Edinburgh Postnatal Depression Scale (EPDS). A cutoff threshold for BAI/EPDS of 10 classed patients into an Index group (>10, n=23) and a Control group (<10, n=23). Cortisol concentrations in hair (HCC) were periodically monitored throughout pregnancy and delivery. Expression differences of main glucocorticoid pathway genes: i.e. corticotropin-releasing hormone (CRH), 11β-hydroxysteroid dehydrogenase (HSD11B2), glucocorticoid receptor (NR3C1), as well as other key stress biomarkers (Arginine Vasopressin, AVP and O-GlcNAc transferase, OGT) were explored in medial placentae using real-time qPCR and western blotting. Moreover, gene expression changes were considered for their association with HCC, offspring, gender and birthweight. A significant dysregulation of gene expression for CRH, AVP and HSD11B2 genes was seen in the Index group, compared to controls, while OGT and NR3C1 expression remained similar between groups. Placental gene expression of the stress-modulating enzyme 11β-hydroxysteroid dehydrogenase (HSD11B2) was related to both hair cortisol levels (Rho= 0.54; p<0.01) and the sex of the newborn in pregnancies perceived as stressful (Index, p<0.05). Gene expression of CRH correlated with both AVP (Rho= 0.79; p<0.001) and HSD11B2 (Rho= 0.45; p<0.03), and also between AVP with both HSD11B2 (Rho= 0.6; p<0.005) and NR3C1 (Rho= 0.56; p<0.03) in the Control group but not in the Index group; suggesting a possible loss of interaction in the mechanisms of action of these genes under stress circumstances during pregnancy.

In the Ebro Delta, the abundance of burrowing bivalves has dramatically decreased, with the blue crab, Callinectes sapidus, being blamed by shellfish collectors. Trends from 2010 evidence a decrease in the capture of clams (Ruditapes spp.) before 2016 (start of blue crab fisheries), although further decline of both clam and cockle (Cerastoderma glaucum) occurred in 2018. In contrast, captures of razor clam (Ensis siliqua) have increased by 3.6-fold since 2016. Predation risk for these taxa with contrasting burrowing capacities (1.7 ± 0.3cm, 0.4 ± 0.2cm, and 26.3 ± 0.1cm, respectively), was assessed using predation preference (N= 5 tanks; 5 individuals of each species) and no-choice experiments (N= 5 tanks; 15 individuals) in the absence and in the presence of sand. Results showed that in the absence of sand, the razor clam, was fully preyed in 24h, clams in 96h, and cockles reached 60% after 144h. Conversely, when sand was present, only 4% of razor clams were predated, while clams and cockles reached 60-100% in 120-144h. No-choice results featured similar patterns depending on substrate availability. Overall, clams and cockles appear to be greatly vulnerable to blue crab predation, whereas the razor clam may escape thanks to its deeper burrowing capacity.

The unstable international economic situation is reflected in the supply chain stress, lack or increased cost of some raw materials, fuel or semi-finished products is forcing organizations to perform new optimization initiatives in the utilization of their equipment and assets pointed to obtain the maximum value from them, while maintaining and even improving the quality of their products. The achievement of these objectives involves the reduction or minimization of equipment downtime to maintain the advantage over their competitors and ensure the organization's competitiveness. The intelligent maintenance system (IMS) provides adequate support for decision-making related to equipment maintenance, since poor maintenance results in unplanned stoppages, with the consequent additional cost and increased customer dissatisfaction, and an over-maintenance can result in an additional labor cost, time and the replacement of parts that are in good conditions. The utilization of new tools and technologies introduced by Industry 4.0 offers multiple opportunities for enhancement through communication and computerized data processing, aiming to improve the maintainability of a hydrogen compressor using neural networks based on attention mechanisms combined with linear regression.

In this paper we use the Mellin convolution theorem, which is related to Perron's formula. Also we introduce new explicit formulae for arithmetic function which generalize the explicit formulae of Weil for other arithmetic functions different from the Von-Mangoldt function.

The influence of hafnium metal (Hf) and sulfate ions (SO₄^-2) on the acidic properties of SiO₂ mesopores synthesized by a non-hydrothermal method was studied using the following characterization techniques; TG-DTG, XRD, BET, SEM, TEM, EDS, FTIR, n-butylamine titration, FTIR-pyridine, and alcohol dehydration. The incorporation of 3.6% mol of Hf during the silicate synthesis step caused the characteristic structural arrangement of MCM-41 to collapse. However, an increase in the acid strength of the catalyst of up to 315 mV was observed, with Brönsted and Lewis-type acid sites being mostly present therein. Furthermore, the acidity of Hf- and (SO₄^-2) -modified SiO₂ in the dehydration of ethanol and methanol was evaluated, resulting in a selectivity towards ethylene and dimethyl ether, respectively. Acid solids have enormous potential to produce important compounds for the chemical industry using alternative routes other than petrochemical processes. They also represent a significant advance for biorefineries.

The international literature shows a polarised debate on the impacts of climate change on migration. Some studies find a positive linkage, whereas others find a negative one. It is, without a doubt, a complex process better considered case-specific. There is no available information on the relationship between climate change and migration in Colombia, despite past research exploring each of these subjects independently. This study intends explicitly to investigate this linkage gap. Consequently, this paper's essential contribution is that it builds a bridge between climate change scenarios and migratory science for the first time in Colombia. Despite their limitations, the theoretical and methodological framework suggested by IOM (2009b pp. 86, Section B, Chapter II) is demonstrated in this study to be very valid since it provides a methodology to predict where future flows will occur (based on past evidence). The methodological approaches of SLA and NELM explained in section A in the IV Chapter are also valuable for analysing and approaching this study's conclusions. The primary conclusions of this study indicate that the "Coffee Region," Valle, and Atlantic (or Caribbean Coast) provinces that mainly send emigrants to Spain and the US are the key internal regions responsible for most of the international migration from Colombians. The same areas are especially vulnerable to the impacts of upcoming climate change in the A1B scenario produced by the IDEAM (2010) for 2040 and 2100. Thus, future flows of migrants are expected from these regions (2040-2100). However, issues such as visa requirements or the costs associated with migration constitute international barriers to this flow. The sensitivity of these regions can also be associated with internal migration flows, more armed conflict, and forced displacement in a cyclical process. Theoretically, a resurgence of Colombia's armed conflict and displacement due to climate change can be expected. However, the need for empirical studies in Colombia to support this analysis is imperative and is the most crucial recommendation arising from this study.

Background: COVID-19 made its debut as a pandemic in 2020; since then, more than 607 million cases and at least 6.5 million deaths have been reported worldwide. While the burden of disease has been described, the long-term effects or chronic sequelae are still being described. Objective: To describe the findings of a current systematic review of the long-term effects related to post-COVID-19 sequelae. Design: A systematic review was carried out in which cohort studies, case series, clinical case reports were included, and the PubMed, Scielo, SCOPUS and Web of Science databases were ex-tracted. Information published 2020 to June 1, 2022, was sought. Results: We reviewed 300 manuscripts during the first step of the literature review process. Then 260 abstracts were analyzed. In the end, we included 32 manuscripts: 9 for pulmonary, 6 for cardiac, 2 for renal, 9 for neurological and psychiatric, and 8 for cutaneous sequelae. Conclusion: Studies show that the most common sequelae are those linked to the lungs, followed by skin, cutaneous and psychiatric alterations. Women report a higher incidence of the sequelae, as well as those with comorbidities and severer COVID-19 history. The COVID-19 pandemic has not only caused death and disease since its apparition but has also sickened millions of people around the globe who potentially suffer from serious illnesses that will continue to add to the list of health problems and further burden healthcare systems around the world.

In this work, an embroidered textile moisture sensor is presented. The sensor is based on a capacitive interdigitated structure embroidered on a cotton substrate with an embroidery conductor yarn composed by 99% pure silver plated nylon yarn 140/17 dtex. In order to evaluate the sensor sensitivity, the impedance of the sensor has been measured by means of a LCR meter from 20 Hz to 20 kHz on a climatic chamber with a sweep of the relative humidity from 25% to 65% at 20 ºC. The experimental results show a clear and controllable dependence of the sensor impedance with the relative humidity. Moreover, the reproducibility of the sensor performance subject to the manufacturing process variability and washing process is also evaluated. The results show that the manufacturing variability introduce a moisture measurement error up to 4%. The washing process impact on the sensor behavior after applying the first washing cycle implies a sensitivity reduction higher than 14%. Despite these effect, the textile sensor keeps its functionality and can be reused in standard conditions. Therefore, these properties point out the usefulness of the proposed sensor to develop wearable applications on health and fitness scope including the user needs to have a life cycle longer than one-time use

Accurately mapping individual tree species in densely forested environments is crucial to forest inventory. When considering only RGB images, this is a challenging task for many automatic photogrammetry processes. The main reason for that is the spectral similarity between species in RGB scenes, which can be a hindrance for most automatic methods. State-of-the-art deep learning methods could be capable of identifying tree species with an attractive cost, accuracy, and computational load in RGB images. This paper presents a deep learning-based approach to detect an important multi-use species of palm trees (Mauritia flexuosa; i.e., Buriti) on aerial RGB imagery. In South-America, this palm tree is essential for many indigenous and local communities because of its characteristics. The species is also a valuable indicator of water resources, which comes as a benefit for mapping its location. The method is based on a Convolutional Neural Network (CNN) to identify and geolocate singular tree species in a high-complexity forest environment, and considers the likelihood of every pixel in the image to be recognized as a possible tree by implementing a confidence map feature extraction. This study compares the performance of the proposed method against state-of-the-art object detection networks. For this, images from a dataset composed of 1,394 airborne scenes, where 5,334 palm-trees were manually labeled, were used. The results returned a mean absolute error (MAE) of 0.75 trees and an F1-measure of 86.9%. These results are better than both Faster R-CNN and RetinaNet considering equal experiment conditions. The proposed network provided fast solutions to detect the palm trees, with a delivered image detection of 0.073 seconds and a standard deviation of 0.002 using the GPU. In conclusion, the method presented is efficient to deal with a high-density forest scenario and can accurately map the location of single species like the M flexuosa palm tree and may be useful for future frameworks.

This paper outlines the ongoing development of a specialised mobile application to address the mental health needs of vulnerable populations in the European Union (EU). Conducted as a mixed-methods research within two EU Science and Technology Cooperation Actions, the study prioritises stakeholder feedback to identify features for initial testing and strategies to improve application uptake, using critical digital health analysis. With a focus on marginalised groups such as refugees, migrants and socio-economically disadvantaged individuals, the application aims to provide an accessible and culturally sensitive platform for mental health support, integrating evidence-based interventions such as cognitive behavioural techniques and mindfulness exercises. Key features include multilingual support, habit tracking, personalised recommendations for support and services, and real-time crisis intervention. Collaboration with stakeholders and ongoing rigorous usability testing are driving the refinement process to ensure usability, acceptability and effectiveness, underscoring the importance of user engagement in technology-based mental health interventions in the EU context and highlighting the importance of collaborative science and technology for societal benefit.

The need to develop novel lightweight materials and their manufacturing processes is sets out to meet the new aerospace, automotive and construction requirements. Within this context, this research work is proposed to develop a novel thermoplastic composite material with high mechanical properties. These composites will be based on thermoplastic matrixes made from polyamide and 35% short glass fiber filled-polyamide reinforced with different types of fabrics. As reinforcement, glass fiber fabrics will be used as the base. They will be treated with different processes, both chemical and physical, to promote adherence to the matrix. Textile overmoulding technology was selected for manufacturing these composites. This technology was primarily developed to manufacture aesthetic lined components and has achieved a great implantation. Once these new composites are manufactured, they will be submitted to different tests to evaluate their behavior regarding adhesion, impact strength and stiffness. It is expected an improvement on stiffness and impact absorption.

Recently Palle has investigated the chiral vorticity and Cartan torsion in neutrino asymmetries. In his case he addressed this problem in Goedel s like anisotropic Einstein-Catan cosmology. In this paper we discusse how these ideas applied to sheared Bianchi types I Einstein-Cartan (EC) neutrino amisotropic cosmology, affect the handness of neutrinos in the universe. Actually here a novel concept of the chiral metric is introduced where metric functions also possess two distinct signs as in neutrino flipping or helicity. The axial anomaly equation for neutrinos in the presence of torsion and metric chirality is shown to produce left-handed neutrinos from right-handed torsion. Metric chirality is shown to be able to define how the metric would behave far away of neutrino density. Chiral flipping of the chiral neutrinos in the presence of torsion is also investigated. It is shown that when the chiral torsion is left-handed the chemical chiral potential vanishes as the universe expands.

Research on Traffic Light Recognition (TLR) has grown in recent years, primarily driven by the growing interest in autonomous vehicles development. Machine Learning algorithms have been widely used to that purpose. Mainstream approaches, however, require large amount of data to properly work, and as a consequence, a lot of computational resources. In this paper we propose the use of Expert Instruction (IE) as a mechanism to reduce the amount of data required to provide accurate ML models for TLR. Given an image of the exterior scene taken from the inside of the vehicle, we stand the hypothesis that the picture of a traffic light is more likely to appear in the central and upper regions of the image. Frequency Maps of traffic light location were thus constructed to confirm this hypothesis. The frequency maps are the result of a manual effort of human experts in annotating each image with the coordinates of the region where the traffic light appears. Results show that EI increased the accuracy obtained by the classification algorithm in two different image datasets by at least 15%. Evaluation rates achieved by the inclusion of EI were also higher in further experiments, including traffic light detection followed by classification by the trained algorithm. The inclusion of EI in the PCANet achieved a precision of 83% and recall of 73% against 75.3% and 51.1%, respectively, of its counterpart. We finally presents a prototype of a TLR Device with that expert model embedded to assist drivers. The TLR uses a smartphone as a camera and processing unit. To show the feasibility of the apparatus, a dataset was obtained in real time usage and tested in an Adaptive Background Suppression Filter (AdaBSF) and Support Vector Machines (SVMs) algorithm to detect and recognize traffic lights. Results show precision of 100% and recall of 65%.

An accurate, economical, and reliable device for detecting falls in persons ambulating with the assistance of an orthopedic walker is crucially important for the elderly and patients with limited mobility. Existing wearable devices such as wristbands are not designed for walker users, and patients may not wear them at all times. This research proposes a novel idea of attaching an internet-of-things (IoT) device with an inertial measurement unit (IMU) sensor directly to an orthopedic walker to perform real-time fall detection as well as activity logging. A dataset is collected and labeled for walker users in four activities, including idle, motion, step, and fall. Classic machine learning algorithms are evaluated using the dataset by comparing their classification performance. Deep learning with convolutional neural network (CNN) is also explored. Furthermore, the hardware prototype is designed by integrating a low-power microcontroller for onboard machine learning, an IMU sensor, a rechargeable battery, and Bluetooth wireless connectivity. The research results show the promise of improved safety and well-being of walker users.

In this work, two embroidered textile moisture sensors are characterized with three different conductive yarns. The sensors are based on a capacitive interdigitated structure embroidered on a cotton substrate with an embroidered conductor yarn. The performance comparison of 3 different type of conductive yarns has been addressed. In order to evaluate the sensor sensitivity, the impedance of the sensor has been measured by means of a LCR meter from 20 Hz to 20 kHz on a climatic chamber with a sweep of the relative humidity from 30% to 65% at 20 ºC. The experimental results show a clear and controllable dependence of the sensor impedance with the relative humidity and the used conductor yarns. This dependence points out the optimum conductive yarn to be used to develop wearable applications for moisture measurement.

Millimeter wave antennas have significance for high-speed, high-capacity wireless communication, delivering substantial advantages and an array of applications. This literature review analyzes the historical development, assessment of performance, difficulties with design, and contemporary applications in telecommunications, radar systems, and imaging. It covers the development of technology, especially within the context of 5G and beyond, and focuses at several antenna designs that deal with technical issues including reduction and impedance matching. The review also studies the effect of design on efficiency and bandwidth, identifying research gaps and potential futures, notably in terms of 5G technology. The commitment to develop millimeter wave antenna technology for next-generation wireless networks is evident, underlining the need of continued research and development.

The Autopoiesis and Cognition Theory (ACT), by Maturana and Varela, based on the notions of Biological Closure and Structural Coupling, is a well-known theory on how to understand biological organization [1, 2, 3]. Although, for example, the Free Energy Principle framework evokes some entailments of autopoiesis in a more formal setting [4, 5]; and ACT has been used in many fields, its impact has been restricted because it lacks quantitative analysis. Here we present a theoretical framework grounded in accepted and well-developed ideas from Mathematics and Physics which advance the understanding of the Principles of Biological Organization under the guidance of Biological Closure and Structural Coupling. The disciplines of Differential Geometry/Topology, Mechanics and Complex Dynamical Systems provide a powerful, elegant, and well-established body of knowledge to support our Biological Organization Principles (BOP) framework. In particular, Stochastic Mechanics and KAM theory (from Kolmogorov, Arnold and Moser theorem) allow us to develop, using the notions of Biological Closure and Structural Coupling, a central core of BOP termed Dynamical Closure Mechanism. Under the proposed framework, a wide variety of bio- logical phenomena can be understood, shedding new light on biological explanations. However, an understanding of biological organization may require the re-evaluation of dogmas on how we think on biology as it seems inescapable that what is needed is an integration of analysis and notions derived from mathematics, physics, and biology to generate a new landscape of ideas.

In cotton cultivars, an insect that causes irreversible damage is the Spodoptera frugiperda, known as the fall armyworm. Since the visual detection of plants is a burdensome task for human inspection, the spectral information related to plant damage, registered on a spectral scale, can be useful. These measurements, associated with machine learning techniques, produce useful information for a rapid and non-invasive inspection method development. To contribute to this gap fulfillment, this paper proposes a machine learning framework to model the spectral response of cotton plants under the attack of the fall armyworm. Additionally, a theoretical model is presented, built from the results of the machine learning analysis, to infer this damage with up-to-date orbital sensors. The data was composed of the reflectance measurements collected at a cotton field with control plants and plants submitted to Spodoptera frugiperda damage. Their spectral response was recorded with a hand-held spectroradiometer ranging from 350 to 2,500 nm, for eight consecutive days. Different machine learning models were evaluated and the overall best model was defined by accuracies comparisons on a testing-set. A ranking approach was adopted based on the model accuracy, returning the most contributive wavelengths for the classification. Sequentially, an unsupervised neural network (Self-Organizing Map - SOM) was implemented to reduce data-dimensionality and assist in the definition of important spectral regions. The regions were associated with the spectral bands of the two sensors (OLI and MSI) and a theoretical model using a band simulation process with the overall best machine learning model was proposed. The results indicated that the Random Forest (RF) algorithm is the most suitable to predict cotton-plants damaged by insects and that the last day of analysis (8th day) was better to separate it, with F-measure equals 0.912. The ranking approach combined with the SOM method indicated the spectral regions at the red to near-infrared (650 to 1,350 nm) and shortwave infrared (1,570 to 1,640 nm) as the most important regions to the analysis. The proposed theoretical model simulated with the OLI and MSI sensor-bands returned an F-Measure of 0.865 and 0.886, respectively. In conclusion, this framework can be used to map cotton-plants under insect-attack. The theoretical model presents high accuracy to infer the insect-damaged on cotton plants based on multispectral bands from other sensors, being a useful tool for future research that intends to evaluate it in other areas and at different field scales.

Background: The febrile patient from tropical areas, in which emerging arboviruses are endemic, represent a diagnostic challenge and potential co-infections with other pathogens (i.e bacteria or parasites) are usually overlooked. Objectives: We present a case of an elderly woman diagnosed with dengue, chikungunya and Leptospira interrogans co-infection. Study Design: Case report. Results: An 87-year old woman from Colombia complained of upper abdominal pain, arthralgia, myalgia, hyporexia, malaise and intermittent fever accompanied with progressive jaundice. She had a medical history of chronic heart failure (Stage C, NYHA III), without documented cardiac murmurs, right bundle branch block, non-valvular atrial fibrillation, hypertension, and chronic venous disease. Her cardiac and pulmonary status quickly deteriorated after 24 hours of her admission without electrocardiographic changes and she required ventilatory and vasopressor support. In the next hours the patient evolved to pulseless electrical activity and then she died. Dengue IgM, NS1 ELISA, MAT for Leptospira interrogans and RT-PCR for chikungunya, were positive. Discussion: This case illustrates a multiple co-infection in a febrile patient from a tropical area of Latin America that evolved to death.

The search for new food products that promote consumers health has always been of great interest. The dairy industry is perhaps the best example regarding the emergence of new products with claimed health benefits. Cheese whey (CW), the by-product resulting from cheese production, and second cheese whey (SCW), which is the by-product of whey cheese manufacture, have proven to be potential ingredients for the development of food products with improved nutritional characteristics and other functionalities. Nowadays, due to their nutritional quality, whey products have gained a prominent position among healthy food products. However, for long, CW and SCW were usually treated as waste or as animal feed. Due to their high organic content, these by-products can cause serious environmental problems if discarded without appropriate treatment. Small and medium size dairy companies do not have equipment and structure to process whey and second cheese whey. In these cases, generally, they are used for animal feed or discarded without an appropriate treatment, being the cause of several constraints. There are several studies regarding CW valorization and there is a wide range of whey products in the market. However, in the case of SCW remains a lack of studies regarding its nutritional and functional properties, as well as ways to reuse this by-product in order to create economic value and reduce environmental impacts associated to its disposal.

Sword-duels are interesting, from a game-theoretical perspective, as they correspond to sudden-death interactions between players (i.e., defeat means removal from the game), and where victory/defeat depend on not just skill, but also luck. Analyzing probabilities of victory streaks, given a certain level of self and others' skill, is thus relevant for any application domain that can be modeled in the same way. This paper takes inspiration from Miyamoto Musashi, famously undefeated for 61 duels, and implements a Markov-chain Monte-Carlo simulation approach to evaluate this scenario. Results suggest that a 61 victory streak can be probabilistically observed when skill level is roughly 6.5 times that of the average duelist, and with 95\% confidence when skill level is roughly 1000 times that of the average duelist. More generally, this paper provides a method for determining chances of victory streaks in game-theoretical sudden-death encounters, when both "skill" and "luck" contribute to the outcome of the encounter. Specific scenarios can be modeled by modifying the utilized Markov chain and adjusting sampled distributions as required.

Cardiovascular disease is the most common cause of death. Oxidative stress and inflammation are pathophysiological processes involved in the development of cardiovascular diseases, so anti-inflammatory and antioxidant agents that modulate redox balance have become the targets of research to evaluate their molecular mechanisms and therapeutic properties. Astaxanthin, a carotenoid of the xanthophyll group, has potent antioxidant effects due to its molecular structure and its arrangement in the plasma membrane, factors that favor the neutralization of reactive oxygen and nitrogen species. This carotenoid also stands out for its anti-inflammatory activity, possibly interrelated with its antioxidant effect, as well as for its modulation of lipid and glucose metabolism. Considering the potential positive effects of astaxanthin on cardiovascular health evidenced by preclinical and clinical studies, this paper describes the molecular and cellular mechanisms related to the antioxidant and anti-inflammatory properties of this carotenoid in cardiovascular diseases, especially atherosclerosis.

Mobility is a vital welfare indicator which may influence broilers’ daily activities. Classical broiler mobility assessment methods are laborious and cannot provide timely insights into their conditions. Here, we proposed a semi-supervised Deep Learning (DL) model, YOLOv5, combined with Deep Sort algorithm conjoined with our newly proposed algorithm, Neo-Deep Sort, for individual broiler mobility tracking. Initially, 1,650 labeled images from five days were employed to train the YOLOv5 model. Through semi-supervised learning (SSL), this narrowly trained model was then used for pseudo-labeling 2,160 images, of which 2,153 were successfully labeled. Thereafter, the YOLOv5 model was fine-tuned on the newly labeled images. Lastly, the trained YOLOv5 and the Neo-Deep Sort algorithm were applied to detect and track 28 broilers in two pens and categorized them in terms of hourly and daily traveled distances and speeds. SSL helped in increasing the YOLOv5 model’s mean Average Precision (mAP), in detecting birds, from 81% to 98%. As compared with the manually measured covered distances of broilers, the combined model provided individual broiler's hourly moved distances with a validation accuracy of about 80%. Eventually, individual and flock level mobilities were quantified while overcoming the occlusion, false and miss detection issues.

Probabilistic latent semantic analysis is a statistical technique developed for information retrieval and spanned many fields. It yields intuitive and solid results. However, the rigidity of the assumptions and the iterative nature derived from the Expectation-maximization algorithm generate several problems, dividing detractors and enthusiasts. In this manuscript, we first describe the Probabilistic latent semantic analysis. After, we discuss reformulations that attempt to solve these problems. We pay special attention to the works relating Probabilistic latent semantic analysis and the Singular value decomposition Theorem. Also, Probabilistic latent semantic analysis can be the basis for other techniques, such as kernelization or probabilistic transfer learning, and those that extend the descriptive character of the Principal component analysis to an inferential tool and open a window of opportunities.

With the aim of profitable conversion of carbon dioxide (CO2) in an efficient, economical and sustainable manner, we developed a CuBr/ionic liquid (1-butyl-3-methylimidazolium acetate) catalytic system which could efficiently catalyze the three-component reactions of propargylic alcohols, 2-aminoethanols, and CO2 to produce 2-oxazolidinones and α-hydroxy ketones. Remarkably, this catalytic system employed lower metal loading (0.0125-0.5 mol%) but exhibited the highest turnover number (2960) ever reported, demonstrating its excellent activity and sustainability. Moreover, our catalytic system could efficiently work under 1 atm of CO2 pressure and recycle among the metal-catalyzed systems.

In the field of robotics education, introductory courses would ideally utilize heavy industrial arms for hands-on learning. This would provide students with valuable experience in joint programming, which involves direct control of each joint motor in the arm to accomplish desired path planning and differential movements. This practice requires consideration of the physical dynamics of the arm. However, the use of heavy industrial arms has several drawbacks. They are large and expensive, require specialized maintenance, can pose safety risks, and they typically do not allow for direct control of the joint motors. One solution is to use a small, lightweight, toy-like arm. While these are cost-effective and provide direct access to the joint motors without posing safety risks, their lightweight construction means they exhibit minimal dynamic behavior, which limits their educational value. Another solution involves a robotic arm simulator that uses a virtual arm. However, a virtual arm doesn't offer the same level of hands-on engagement and excitement as a physical arm. We propose a hybrid solution that combines a small physical arm with a virtual arm. This approach provides students with the experience of working with an industrial arm, but without the associated difficulties. We demonstrate how this approach successfully improved the completion rate of joint programming assignments, offering a promising solution for practical robotics education.

Proteins and DNA exhibit key physical chemical properties that make them advantageous for building nanostructures with outstanding features. Both DNA and protein nanotechnology have growth notably and proved to be fertile disciplines. The combination of both types of nanotechnologies is helpful to overcome the individual weaknesses and limitations of each one, paving the way for the continuing diversification of the structural nanotechnologies. Recent studies have implemented a synergistic combination of both biomolecules to assemble unique and sophisticate protein-DNA nanostructures. These hybrid nanostructures are highly programmable and display remarkable features that create new opportunities to build in the nanoscale. This review focuses on the strategies deployed to create hybrid protein-DNA nanostructures. Here, we will discuss strategies such as polymerization, spatial directing and organizing, coating, rigidizing or folding DNA into particular shapes or moving parts. The enrichment of structural DNA nanotechnology by incorporating protein nanotechnology has been clearly demonstrated and still shows a large potential to create useful and advanced materials with cell-like properties or dynamic systems. It can be expected that structural protein-DNA nanotechnology will open new avenues in the fabrication of nano-assemblies with unique functional applications and enrich the toolbox of bionanotechnology.

Summer annual species are the most widely grown crops in the Upper Midwest, but reliance on a summer annual system has led to excessive soil and nutrient loss when crops are not present. Integrating winter rye (Secale cereale L.), known for its hardiness and environmental benefits, into the rotation can address these issues. However, there's limited understanding of the phenotypic diversity in winter rye during key growth stages that overlap with the typical planting dates for corn (Zea mays L.), soybean [Glycine max (L.) Merr], and late-planted crops like dry bean (Phaseolus vulgaris L.). Thus, the objectives of this study were to evaluate changes in biomass accumulation and quality of winter rye and triticale (x Triticosecale Wittmack) cultivars at three growth stages. Twenty cultivars were assessed over the 2014-2015 and 2015-2016 growing seasons across three environments in Minnesota. Winter rye and triticale were harvested for biomass at the tillering, booting, and soft dough growth stages and rye biomass yield and quality [i.e., crude protein, neutral detergent fiber (NDF), and 48-hour digestibility (NDFD)] were determined following harvest. Overall, there was little variation in each parameter among the cultivars within a location and growth stage. NDFD had some variation at the soft dough stage where digestibility ranged from 273 to 324 g kg-1 at the Crookston site and 332 to 406 g kg-1 at the St. Paul site. The lack of difference between cultivars indicates a wide range of choice when selecting a winter rye cultivar.

The strong couplings among ecological, economic, social and technological processes explains the complexification of human-made systems, and phenomena such as globalization, climate change, the increased urbanization and inequality of human societies, the power of information, and the COVID-19 syndemics. Among complexification’s essential features are non-decomposability, asynchronous behavior, components with many degrees of freedom, increased likelihood of catastrophic events, irreversibility, nonlinear phase spaces with immense combinatorial sizes, and the impossibility of long-term, detailed prediction. Sustainability for complex systems implies enough efficiency to explore and exploit their dynamic phase spaces and enough flexibility to coevolve with their environments. This in turn means solving intractable nonlinear semi-structured dynamic multi-objective optimization problems, with conflicting, incommensurable, non-cooperative objectives and purposes, under dynamic uncertainty, restricted access to materials, energy and information, and a given time horizon, aiming at enhancing the co-evolutionary power of the Biosphere and its human subsystems. Giving the high-stakes, the need for effective, efficient, diverse solutions, their local-global, present-future effects, and their unforeseen short, medium and long-term impacts, achieving sustainable complex systems implies the need for Sustainability-designed Universal Intelligent Agents, harnessing the strong functional coupling between human, artificial and nonhuman biological intelligence in a no-zero-sum game to achieve sustainability.

Purpose To analyse diagnostic and therapeutic impact of molecular imaging TNM (miTNM) stage obtained with 18F-DCFPyL versus 18F-Fluorocholine in head to head comparison in biochemical recurrence (BCR) prostate cancer (PCa). Material and methods Patients with BCR PCa after radical treatment with previous 18F-Fluorocholine-PET/CT (negative or oligometastatic disease) were derived to 18F-DCFPyL-PET/CT. Patients were classified attending to: grade group, EAU classification, PSA, PSA doubling time (PSAdt) and PSA velocity (PSAvel). The overall detection rate (DR) and miTNM stage according to PROMISE criteria were assessed for both radiotracers and also correlation (Kappa). The influence of PSA and kinetics on both PET/CT (DR and miTNM) and predictive value of unfavourable kinetics on miTNM were determined. Cut-off PSA, PSAdt and PSAvel values able to predict PET/CT results were determined. Change in miTNM and treatment derived of 18F-DCFPyL information with respect to 18F-Fluorocholine was also evaluated. Results We studied 138 patients. 18F-DCFPyL showed a higher DR than 18F-Fluorocholine (64.5% vs 33.3%). 18F-DCFPyL and 18F-Fluorocholine detected T in 33.3% versus 19.6%, N in 27.5% versus 13.8%, M in 30.4% versus 8.7%. Both tracers DR showed significant associations with PSA and PSAvel. Significant association was only found between miTNM and PSA on 18F-Fluorocholine-PET/CT (p=0.033). For 18F-Fluorocholine and 18F-DCFPyL PET/CT a PSAdt cut-off of 4.09 and 5.59 months, respectively, were able to predict M stage. 18F-DCFPyL changed therapeutic management in 40/138 patients. Conclusion 18F-DCFPyL provides a higher DR and superior miTNM staging than 18F-Fluorocholine in restaging BCR, especially with high PSA and unfavourable PSA kinetics, showing a fair agreement to 18F-Fluorocholine.

Higher salt (sodium) intake has been associated with a higher blood pressure (BP). The association degree may be influenced by factors such as age, origin and dietary components. This study aimed to evaluate the 24-hours urinary sodium (Na) and potassium (K) excretion in normotensive and hypertensive Dominicans adults and estimate their salt intake. 163 volunteers (18-45, 46-80 years) participated in a cross-sectional study. 24-hours Na and K urinary excretion were measured using an ion selective electrode technique. Na and K urinary excretion (99.4±46.5 and 35.0±17.5 mmol/24h) did not correlated with BP, except in the normotensive group in which K correlated with SBP (0.249, p=0.019). Na and K excretion were similar for normo- and hypertensive subjects. Na-to-K molar ratio (3.1±1.3) was higher in younger subjects (p=0.040). Na-to-K ratio was associated with DBP in the total group (r=0.153, p=0.052), in the hypertensive group (r=0.395, p<0.001) and in the older group with SBP (0.350, p=0.002) and DBP (0.373, p<0.001). In the older group, Na-to-K ratio and DBP correlated after controlling for subjects with hypertension controlled by treatment (r=0.236, p=0.041). The Na-to-K ratio correlated, when salt intake was over 5g/d (52.2%), with SBP (rho=0.219, p=0.044) and DBP (rho=0.259, p=0.017). Determinants of BP were age-dependent and in younger subjects were: sex (SBP, beta: 14.02±2.87, p<0.001) and body mass index (BMI) (beta:-12.07±3.72, p=0.001, beta:9.44±2.87, p=0.001, for SBP and DBP, respectively) and, in the olders, the Na-to-K ratio, for SBP (beta:6.7±2.4, p=0.005) and DBP (beta:3.8±1.1, p<0.001). The mean Na and salt intakes (2.3 and 5.8 g/d) were slightly higher and K intake lower (1.4 g/d) than WHO recommendations.

A strategy to reduce qualitative and quantitative losses in crop-yields refers to early and accurate detection of insect-damage caused in plants. Remote sensing systems like hyperspectral proximal sensors are a promising strategy for managing crops. In this aspect, machine learning predictions associated with clustering techniques may be an interesting approach mainly because of its robustness to evaluate high dimensional data. In this paper, we model the spectral response of insect-herbivory-damage in maize plants and propose an approach based on machine learning and a clustering method to predict whether the plant is herbivore-attacked or not using leaf reflectance measurements. We differentiate insect-type damage based on the spectral response and indicate the most contributive wavelengths to perform it. For this, we used a maize experiment in semi-field conditions. The maize plants were submitted to three different treatments: control (health plants); plants submitted to Spodoptera frugiperda herbivory-damage, and; plants submitted to Dichelops melacanthus herbivory-damage. The leaf spectral response of all plants (controlled and submitted to herbivory) was measured with a FieldSpec 3.0 Spectroradiometer from 350 to 2500 nm for eight consecutive days. We evaluated the performance of different learners like random forest (RF), support vector machine (SVM), extreme gradient boost (XGB), neural networks (MLP), and measured the impact of a day-by-day analysis into the prediction. We proposed a novel framework with a ranking strategy, based on the accuracy returned by predictions, and a clusterization method based on a self-organizing map (SOM) to identify important regions in the reflectance measurement. Our results indicated that the RF-based framework algorithm is the overall best learner to deal with this type of data. After the 5th day of analysis, the accuracy of the algorithm improved substantially. It separated the three treatments into different groups with an F-measure equal to 0.967, 0.917, and 0.881, respectively. We also verified that the most contributive spectral regions are situated in the near-infrared domain. We conclude that the proposed approach with machine learning methods is adequate to monitor herbivory-damage of S. frugiperda and stink bugs like Dichelops melacanthus in maize, differentiating the types of insect-attack early on. We also demonstrate that the framework proposed for the analysis of the most contributive wavelengths is suitable to highlight spectral regions of interest.

A nanostructured electrochemical bi-sensor system for analysis of milks has been developed using the Layer by Layer technique. The non-enzymatic sensor [CHI+IL/CuPcS]2, is a layered material containing a negative film of the anionic sulfonated copper phthalocyanine (CuPcS) acting as electrocatalytic material, and a cationic layer containing a mixture of an ionic liquid (IL) (1-butyl-3-methylimidazolium tetrafluoroborate) that enhances the conductivity and chitosan (CHI) that facilitates the enzyme immobilization. The biosensor ([CHI+IL/CuPcS]2-GAO) results from the immobilization of galactose oxidase on the top of the LbL layers. FTIR, UV-vis and AFM have confirmed the proposed structure and cyclic voltammetry has demonstrated the amplification caused by the combination of materials in the film. Sensors have been combined to form an electronic tongue for milk analysis. Principal Component Analysis has revealed the ability of the sensor system to discriminate between milk samples with different lactose content. Using PLS-1 calibration models, correlations have been found between the voltammetric signals and chemical parameters measured by classical methods. PLS-1 models provide excellent correlations with lactose content. Additional information about other components such as fats, proteins and acidity can also be obtained. The method developed is simple and the short response time permits its use in assaying milk samples on-line.

Microbial electrochemical technologies (MET) rely on the presence of the metabolic activity of electroactive bacteria for the use of solid-state electrodes for oxidizing different kind of compound, that could lead to the synthesis of chemicals, bioremediation of polluted matrices, the treatment of contaminants of interest, as well as the recovery of energy. Keeping in mind those possibilities, since the beginning of the present century, there has been a growing interest in the use of electrochemical technologies for wastewater treatment, and if possible with simultaneous power generation. In the last years, there has been a growing interest to explore the possibility of merging MET with constructed wetlands, to offer a new option of intensified wetland system that could keep a high performance with a lower footprint. Based on that interest, this paper explains the general principles of MET, and the different known extracellular electron transfer mechanisms ruling the interaction between electroactive bacteria and potential solid-state electron acceptors. Also, the adoption of those principles for the development of MET set-ups for simultaneous wastewater treatment and power generation, and the challenges that the technology face. Ultimately, the most recent developments in set-ups that merges MET with constructed wetlands are presented and discussed.

Jalapeño peppers (Capsicum annuum L.) are an important agricultural product worldwide. Despite its high demand in recent years, there are few studies on its production under adverse conditions caused by environmental phenomena. Crops in protected environments such as aeroponics offer greater control of these phenomena and enable efficient use of resources. However, it is necessary to validate the cultivation technique for which new technologies are being used. One of these is the analysis of images captured in the visible and near and far infrared spectrum which involves using non-invasive techniques in order to characterize the growth of a plant and diagnose if it presents any type of stress. This study presents the characterization of vegetative growth and fruiting of jalapeño pepper plants in an aeroponic system, where the root, leaf development parameters and fruits were measured in four jalapeño pepper crops through images of plants captured in the visible (VIS), near infrared (NIR) and far infrared (IR) spectrums. Four crops of thirty jalapeño pepper plants were sown to obtain a total of one hundred and twenty plants which were characterized in the different phases of growth and fruiting. Each of the four jalapeño pepper crops were monitored for sixty days in an aeroponic system in a greenhouse. The first crop was intended to carry out tests to establish the appropriate fertigation times, the next three crops were grown under favorable conditions. Algorithms were developed in Matlab to obtain, over ten image capture sessions, the morphometric and thermal parameters of the roots (perimeter, area, length and average temperature), plants (perimeter, area, height and average temperature), and fruiting. (yield and number of fruits). The statistical analysis was carried out using the ANOVA and Tukey tests considering a value of p ≤ 0.05. The results obtained indicate that there is no significant difference between the characterizations of the four crops. This statement is also supported by the visual analysis of the growth curves parameters of the four crops. In addition, the temperature inside the aeroponic system was contrasted with the ambient temperature and it was verified that the temperature to which the roots are exposed was in the range of 10°C – 20°C. The thermal analysis determined that a plant that presents water stress and is also exposed to high temperatures has an average leaf temperature of 3.7 to 5 °C above the optimal condition for the plant, while a plant with stress at normal temperatures was 1.3 °C higher than the plant without stress.

Core chlorophytes possess glycerol-3-phosphate dehydrogenases (GPDs) with an unusual bidomain structure, consisting of a glycerol-3-phosphate phosphatase (GPP) domain fused to canonical GPD domains. These plastid-localized enzymes have been implicated in stress responses, being required for the synthesis of glycerol under high salinity and triacylglycerols under nutrient deprivation. However, their regulation under varying environmental conditions is poorly understood. C. reinhardtii transgenic strains expressing constitutively bidomain GPD2 did not accumulate glycerol or triacylglycerols in the absence of any environmental stress. Although, the glycerol contents of both wild type and transgenic strains increased significantly upon exposure to high salinity. Cycloheximide, an inhibitor of cytoplasmic protein synthesis, abolished this response in the wild type. In contrast, GPD2 transgenic strains were still capable of glycerol accumulation when cultured in medium containing cycloheximide and NaCl. Thus, pre-existing GPD2 protein appears to become activated for glycerol synthesis upon salt stress. Interestingly, staurosporine, a non-specific inhibitor of protein kinases, prevented this post-translational GPD2 protein activation. Structural modeling analyses suggested that substantial conformational rearrangements, possibly triggered by high salinity, may characterize an active GPD2 GPP domain. Understanding this mechanism(s) may provide insights into the rapid acclimation responses of microalgae to osmotic/salinity stress.

In this study, the physical properties of briquettes produced from two different biomass feedstocks (sawdust and date palm trunk) and different plastic wastes were investigated, without using any external binding agent. The biomass feedstocks were blended with different ratios of two WEEE plastics (halogen-free wire and print circuit boards (PCB)) and automotive shredder residues (ASR). The briquettes production is studied at different waste proportions (10-30%), pressures (22-67 MPa) and temperatures (room-130 ˚C). Physical properties as density and durability rating were measured, usually increasing with temperature. Palm trunk gave better results than sawdust in most cases, due to its moisture content and the extremely fine particles that are easily obtained.

MicroRNAs are small non-coding RNAs that are implicated in several physiological processes such as cell development, proliferation, differentiation, apoptosis, immune response and angiogenesis. In the last couple of decades, several studies on miRNA profiling in OSCC have tried to associate miRNAs with clinical characteristics such as relapse, metastasis, and survival, however, the results have been found to vary considerably, sometimes even being contradictory. The main objective of our study was to analyse and verify miRNA expression in oral squamous cell carcinoma in a Spanish population. Second, we attempted to associate the identified deregulated miRNAs with molecular pathways. 8 Oral Squamous Cell Carcinoma patients and 8 healthy control samples were analysed by a microarray Affymetrix® miRNA 4.1 array plate and validated with 8 more cases using RT-qPCR. Deregulated miRNAs were studied using Diana Tools miRPath 3.0 to associate miRNA targets with molecular pathways. Microarray analysis identified 80 deregulated miRNAs (35 over-expressed and 45 under-expressed). Only miR-497-5p and miR-4417 maintained its deregulated expression after validation with qPCR. Among the molecular pathways in which deregulated miRNAs could be implicated, the most statistically significant pathway was ‘proteoglycans in cancer’. No relationship was found between miR-497-5p or miR-4417 expression and clinical or pathological parameters except of nodular affectation (high miR-4417 expression in patients with nodular affectation, p = 0.035) and radiotherapy (diminished miR-497-5p expression in patients who needed radiotherapy, p = 0.05). We have verified the altered expression of miR-497-5p and miR-4417 in Oral Squamous Cell Carcinoma samples and related the deregulated miRNAs with the ‘proteoglycans in cancer’ pathway.

(1) Background: Metabolic syndrome is associated with cardiovascular complications. Therefore, this study aims to establish cut points for the conicity index based on the components of the metabolic syndrome and to associate it with characteristics sociodemographic, food consumption and occupational factors in Brazilian rural workers; (2) Methods: Cross-sectional study carried out with farmers. The receiver operating characteristic curve was calculated and the cutoff points for the conicity index were identified by the area under the curve, sensitivity and specificity. The variables included in the binary logistic regression analysis were selected by considering p &lt; 0.20 in the bivariate test; (3) Results: The cut points were similar in females according to both criteria, resulting in a single cut-off of 1.269. In males, the cut points showed differences, resulting in 1.272 according to the NCEP-ATP III and 1.252 according to the IDF. We have shown that younger people, those who work more than 40 hours a week and the lowest contribution of culinary ingredients are associated with increased odds of abdominal obesity. While the consumption of the products they sell or produce decreases these chances; (4) Conclusions: The conicity index showed high discriminatory power for the identification of abdominal obesity in rural workers.

Plastid genomes are in general highly conserved given their slow evolutionary rate, thus large changes in their structure are unusual. However, when specific rearrangements are present, they are often phylogenetically informative. Asteraceae is a highly diverse family whose evolution is long driven by polyploidy (up to 48x) and hybridisation, both processes usually complicating systematic inferences. In this study, we have generated one of the most comprehensive plastome-based phylogenies of family Asteraceae, providing information about the structure, genetic diversity, and repeat composition of these sequences. By comparing the whole plastome sequences obtained, we confirmed the double inversion located in the long single copy region, for most of the species analysed (with the exception of basal tribes), a well-known feature for Asteraceae plastomes. We also show that genome size, gene order and gene content are highly conserved along the family. However, species representative of the basal subfamily Barnadesioideae -as well as in the sister family Calyceraceae - are lacking the pseudogene rps19 located in one inverted repeat. The phylogenomic analysis conducted here, based on 63 protein-coding genes, 30 transfer RNA genes and 21 ribosomal RNA genes from 36 species of Asteraceae, are overall consistent with the general consensus for the family’s phylogeny, while resolving the position of tribe Senecioneae and revealing some incongruences at tribe level between reconstructions based on nuclear and plastid DNA data.

Context: CYP21A2 deficiency represents 95% of congenital adrenal hyperplasia cases (CAH), a group of genetic disorders that affect steroid biosynthesis. The genetic and functional analysis provides critical tools to elucidate complex CAH cases. One of the most accessible tools to infer the pathogenicity of new variants is in silico prediction. Objective: Analyze the performance of in silico prediction tools to categorize missense single nucleotide variants (SNVs) of the CYP21A2. Methods: SNVs of the CYP21A2 characterized in vitro by functional assays were selected to assess the performance of online single and meta predictors. SNVs were tested separately or in combination with the related phenotype (severe or mild CAH form). In total, 103 SNVs of the CYP21A2 (90 pathogenic and 13 neutral) were used to test the performance of 13 single-predictors and four meta-predictors. Results: SNVs associated with the severe phenotypes were well categorized by all tools, with an accuracy between 0.69 (PredictSNP2) and 0.97 (CADD), and Matthews' correlation coefficient (MCC) between 0.49 (PoredicSNP2) and 0.90 (CADD). However, SNVs related to the mild phenotype had more variation, with the accuracy between 0.47 (S3Ds&GO and MAPP) and 0.88 (CADD), and MCC between 0.18 (MAPP) and 0.71 (CADD). Conclusion: From our analysis, we identified four predictors of CYP21A2 pathogenicity with good performance. These results can be used for future analysis to infer the impact of uncharacterized SNVs' in CYP21A2.

It is well known that working PV plants show several maintenance needs due to wiring and modules degradation, mismatches, dust and PV cells defects and faults. There are a wide range of studies that show the theoretical and some laboratory tests of how these circumstances may affect the PV production. Thus, it results mandatory to evaluate the whole PV plant performance and, then, it’s payback time, profitability and environmental impact or carbon footprint. However, very few studies include a systematic procedure to quantify and supervise the real degradation effects and faults impacts on the field. In this paper, the authors first conduct a brief review of the most frequent PV faults and degradation that can be found on real conditions operative PV Plants. Then, they propose and develop an innovative Geographic Information System application to locate and supervise them. The designed tool has been applied to either a large PV plant of 108 kWp and a small PV plant of just 9 kWp installed on a home rooftop. For the large PV plant, 24 strings of PV modules have been modelized and introduced into the GIS application and every module in the power plant has been studied including voltage, current, power, series and parallel resistance, fill factor, normalized PV curve to STC, thermography and visual analysis. For the small PV installation 3 strings of PV panels have been studied identically. It must be noticed that PV modules in this case include power optimizers. The precision of the study allows the researchers to locate and supervise up to a third part of every PV cell in the system, which are adequately georreferenciated. The developed tool allows both the researchers and the investors to increase control on the PV plant performance and conducts to a better planification of maintenance actuations and to evaluate several PV modules replacement strategies in a preventive maintenance programme. Found PV faults include hot spots, snail tracks, EVA discoloration, PV cells fractures, busbars discoloration, bubbles and Si discoloration.

The objective of this study was to evaluate the glycemic index and the satiety response of three Mexican kinds of honey. The values of fructose ranged from 272.40-395.10 g/kg, while the glucose value ringed 232.20-355.50 g/kg. The ratio F/G of sample honey was 1.45, 1.00, and 1.17 for Highland, Multifloral, and Avocado honey, respectively. Twenty-six participants completed this study, which was previously approved by the ethics committee of the Facultad de Salud Pública y Nutrición (CE 2/2018-19). Highland and Avocado honey is classified as medium-GI (69.204.07 and 66.365.74, respectively), while Multifloral honey is classified as high-GI (74.245.98). The Highland honey presented the best satiety response. The difference in IG values and the effect of the satiety response of Highland honey could be explained by the different fractions of carbohydrates in samples and other components such as phytochemicals.

The bivalve mollusk, Anadara tuberculosa (Black Shell, in Spanish Concha prieta, "CP"), is found on America's Pacific coast, where it is harvested for subsistence and commercial markets. This paper aims to diagnose the performance of the black shell's value chain. We also identify several challenges that must be addressed to improve the sustainability of the black shell fishery in Ecuador. The descriptive methodology was quantitative, with a non-experimental, field, cross-sectional, and ex post facto design. Similar questionnaires were designed, validated, and applied to each link in the production chain to collect information. The performance of the value chain was diagnosed in the dimensions of productivity, competitiveness, and quality of life, reaching a 75.1% index, a result that indicates that the value chain has a moderate to good performance level. However, the value chain can be improved if the following challenges are met: 1) Restoration of the mangrove ecosystem, 2) Promotion of low-intensity shellfish aquaculture, 3) Good sanitary management and purification, 4) Promotion of value-focused ventures, 5) Strengthening of organizations and agreements for the use and custody of mangroves, and 6) Strengthening of institutions that contribute to the advancement of these challenges.

Top-down models are defined by hardware architects to provide information on the utilization of the different hardware components. The target is to isolate the users from the complexity of the hardware architecture while giving them insight into how efficiently the code is using the resources. In this paper, we explore the applicability of 4 top-down models defined for different hardware architectures powering state-of-the-art HPC clusters (Intel Skylake, Fujitsu A64FX, IBM Power9, and Huawei Kunpeng 920) and propose a model for AMD Zen 2. We study a parallel CFD code used for scientific production to compare these 5 Top-Down models. We evaluate the level of insight achieved, the clarity of the information, the ease of use, and the conclusions that each one allows us to reach.

There are different ways to analyse energy absorbance (EA) in the human auditory system. In previous research, we developed a complete finite element model (FEM) of the human auditory system. In this mentioned work, the external auditory canal (EAC), middle ear, and inner ear (spiral cochlea, vestibule, and semi-circular canals) were modelled based on human temporal bone histological sections. Multiple acoustic, structure and fluid-coupled analyses were conducted using the FEM to perform harmonic analyses in the 0.1–10 kHz range. Once the FEM had been validated with published experimental data, the FEM numerical results were used to calculate the EA or energy reflected (ER) by the tympanic membrane. This EA was also measured in clinical audiology tests which were used as a diagnostic parameter. A mathematical approach was developed to calculate the EA and ER, with numerical and experimental results showing adequate correlation up to 1 kHz. Another published FEM had adapted its boundary conditions to replicate experimental results. Here, we recalculated those numerical results by applying the natural boundary conditions of human hearing and found that the results almost totally agreed with our FEM. This boundary problem is frequent and problematic in experimental hearing test protocols: the more invasive they are, the more the results are affected. One of the main objectives of using FEMs is to explore how the experimental test conditions influence the results. Further work will still be required to uncover the relationship between the middle ear structure and EA to clarify how to best use FEMs. Moreover, the FEM boundary conditions must be more representative in future work to ensure their adequate interpretation.

We compare the well known Rayleigh-Ritz variational method (RRVM) with a recently proposed approach based on supersymmetric quantum mechanics and the Gram-Schmidt orthogonalization method (SSQMGS). We apply both procedures to a particular class of double-well harmonic oscillators that had been conveniently chosen for the application of the latter approach. The RRVM eigenvalues converge smoothly from above providing much more accurate results with less computational effort. Present results show that the unproved SSQMGS upper bounds do not hold.

Conyza canadensis is a species invading large agricultural areas throughout the world, mainly to its ability to evolve herbicide resistance. Specifically, in Hungary, extensive areas have been infested by this species due to the difficulty in controlling it with glyphosate. To corroborate this fact as resistance and not as an incorrect herbicide application, eight suspicious glyphosate-resistant C. canadensis populations from different Hungarian regions were studied. In dose-response assays with glyphosate, the LD50 and GR50 values indicated that populations 1 to 5 were resistant to this herbicide (H-5 population the most resistant). Besides, the shikimic acid accumulation tests corroborated the results observed in the dose-response assays. 11 alternative herbicides from 6 different mode of action (MOA) were applied at field doses as control alternatives on populations H-5 and H-6 (both in the same regions). The H-5 population showed an unexpected resistance to flazasulfuron (ALS-inhibitor). The ALS enzyme activity studies indicated that the I50 for H-5 was 63.3 fold higher compared to its correspondent susceptible population (H-6). Therefore, the H-5 population exhibited multiple-resistance to flazasulfuron and glyphosate, being the first case reported in Europe for this two MOA. For that reason, the other herbicides with different MOA have to be tested here.

Fipronil is an insecticide widely used in the agricultural and veterinary sectors for its efficacy in pest control. The presence of fipronil in the environment is mainly due to agricultural and domestic practices and is frequently found in different types of environmental matrices in concentrations ranging from µg/L to mg/L and can be hazardous to non-target organisms due to its high toxicity. This study was carried out to obtain and characterize microorganisms from soil which are capable of biodegrading fipronil that could be of great biotechnological interest. For this purpose, a bioprospecting was carried out using fipronil (0.6 g/L) as the main source of carbon and nitrogen for growth. Once obtained, the strain was identified by sequencing the 16S ribosomal RNA (rRNA) gene and the capacity to degrade fipronil was monitored by GC-MS. Our study showed the presence in soil samples of the strain identified as Enterobacter chengduensis, which was able to metabolize fipronil and its metabolites during the mineralization process. Enterobacter chengduensis was able to biodegrade fipronil (96%) and its metabolites fipronil-sulfone (92%) and fipronil-sulfide (79%) in 14 days. Overall, the results of this study provided a bacterium with great potential that could contribute to the degradation of fipronil in the environment.

Panic disorder (PD) is characterized by recurrent and uncontrollable panic attacks associated with behavioral changes and/or persistent anxiety due to the attacks. The development of behavioral models in animals is important for the understanding of the psychobiological and behavioral bases of PD. The present article reviews the main models used in the current literature. Biobehavioral assays used in rats and mice include fear conditioning (which presents moderate predictive, face, and construct validities); the elevated T-maze (which presents good predictive validity, but low face and construct validities); electrical stimulation of the periaqueductal gray (which presents good face validity, but moderate construct validity); predator exposure models (which present good predictive and moderate construct validity); and hypercapnia-induced responses (which present moderate construct validity). These three approaches seek coherence with theories on fear as a way to increase its translational potential; thus, while the elevated T-maze is supported by the Deakin/Graeff theory, the mouse defense test battery relies on the concept of defensive distance, and periaqueductal gray stimulation is based on the functional neuroanatomy of fear. Moreover, to higher or lower degree the three models are supported by an “etho-experimental” approach, with careful observation of animal behavior as a way of discriminating different defensive strategies that model different aspects of anxiety, fear, and panic. These assays can be used, in conjunction with independent variables that attempt to simulate the vulnerabilities and stressors which lead to panic attacks, to produce true models of PD. Finally, an alternative/complementary model is proposed that uses zebrafish alarm reaction to study this disorder.

Transcriptional regulation constitutes a key step in gene expression regulation. Myocyte enhancer factor 2C (MEF2C) is a transcription factor of MADS box family involved in the early development of several cell types including muscle cells. Over the last decade a novel layer of complexity modulating gene regulation is emerging as non-coding RNAs have been identified, impacting in both transcriptional and post-transcriptional regulation. microRNAs represent the most studied and abundantly expressed subtype of small non-coding RNAs and their functional role have been widely documented. On the other hand, our knowledge on the transcriptional and post-transcriptional regulatory mechanisms that drive microRNA expression is still incipient. We recently demonstrated that MEF2C is able to transactive the long, but not short, regulatory element upstream of miR-23a-miR-27a-miR-24-2 transcriptional start site. However, MEF2C over-expression and silencing, respectively, displayed distinct effects on each of the miR-23a-miR-27a-miR-24-2 mature cluster members, without affecting pri-miRNA expression levels, supporting thus additional MEF2C-driven regulatory mechanisms. Within this study we demonstrated a complex post-transcriptional regulatory mechanisms directed by MEF2C in the regulation of miR-23a-miR-27a-miR-24-2 cluster members, distinctly involving different domains of the MEF2C transcription factor and the physical interaction with pre-miRNAs and RNA interacting proteins such as Ksrp, HnRNPa3 and Ddx17.

The utilization of eco-fonts for office printing is a sustainable, “green” printing concept, which has obvious economic benefits. As a result, it has a significant effect on environmental sustainability. This practice's fundamental problem is the decreased quality of text printed using eco-fonts compared to those printed with regular fonts. The aim of this research is eco-font efficiency estimation, i.e. determination of toner usage reduction level of inkjet-printed documents typed with this font type, as well as estimation of the extent humans perceive differences between text printed with eco-font and the one printed by its “non-eco“ equivalent. Combining the instrumental measuring method and digital image analysis, it was found that this simple principle (eco-font utilization) enables substantial toner usage reduction for an inkjet printing system. At the same time, a visual test showed that the visual experience of text printed using eco-font was sufficient. In addition, awareness of the benefits that eco-font utilization brings, change users’ attitude towards eco-font quality. The concept of removing the black pixel from this commonly used Thai font has a great potential for the sustainability printing process, and this simple solution could be applied to other languages as part of the GIT campaign.

The use of optical fibers is increasing in modern aircraft because it helps solve challenges of size, weight, communication, and reliability in new aircraft generation. This work describes a video and power transmission system using optical fibers (PoF) for in-flight entertainment (IFE) system application. We present the benefits and the limitations of this application, and we perform two practical experiments to demonstrate their performance. It used off-the-shelf devices in the experiments, such as one 15-W semiconductor laser operating at 808 nm, GaAs photovoltaic converters, optical transmitters and receivers, and video monitors. The power and video signals were transmitted using two 50-m multimode fibers. In addition, we proposed and tested two types of energy transformation units (ETU), which are responsible for supplying electrical energy to the IFE video monitor and the optical fiber receiver.

Recent advancements in Natural Language Processing (NLP), particularly in Large Language Models (LLMs), associated with deep learning-based computer vision techniques, have shown substantial potential for automating a variety of tasks. One notable model is Visual ChatGPT, which combines ChatGPT’s LLM capabilities with visual computation to enable effective image analysis. The model’s ability to process images based on textual inputs can revolutionize diverse fields. However, its application in the remote sensing domain remains unexplored. This is the first paper to examine the potential of Visual ChatGPT, a cutting-edge LLM founded on the GPT architecture, to tackle the aspects of image processing related to the remote sensing domain. Among its current capabilities, Visual ChatGPT can generate textual descriptions of images, perform canny edge and straight line detection, and conduct image segmentation. These offer valuable insights into image content and facilitate the interpretation and extraction of information. By exploring the applicability of these techniques within publicly available datasets of satellite images, we demonstrate the current model’s limitations in dealing with remote sensing images, highlighting its challenges and future prospects. Although still in early development, we believe that the combination of LLMs and visual models holds a significant potential to transform remote sensing image processing, creating accessible and practical application opportunities in the field.

The enzymatic activities of bacterial isolates have been widely studied, but a spatial distribution of this activity is rarely focused. New antibiotic-producing microorganisms can be discovered in a more efficient manner if spatial statistical techniques are applied to the distribution of the activity of bacterial isolates in different terrains. This study is focused to generate a series of maps illustrating the spatial distribution of different soil parameters and the inhibition against relative-safe pathogens (like Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, Salmonella, Pseudomonas fluorencens and Enterobacter cloacae) in an urban park in València (Spain). This spatial data has demonstrated a higher proportion of isolates was specifically allocated. This routine of data presentation is valuable for understanding bacterial population dynamics at a local level.

This paper presents a Multilayer Perceptron and Support Vector Machine algorithms approach to predict the number of COVID19 infections in different countries of America. It intends to serve as a tool for decision-making and tackling the pandemic that the world is currently facing. The models were trained and tested using open data from the European Union repository where a time series of confirmed contagious cases was modeled until May 25, 2020. The hyperparameters as number of neurons per layer were set up using a tabu list algorithm. The countries selected to carry out the study were Brazil, Chile, Colombia, Mexico, Peru and the United States. The metrics used are Pearson's correlation coefficient (CP), Mean Absolute Error (MAE), and Mean Percentage Error (MPE). For the testing stage we obtained the following results: Brazil, CP=0.65, MAE=2508 and MPE=17%; Chile, CP=0.64, MAE=504, MPE=16%; Colombia, CP=0.83, MAE=76, MPE=9%; Mexico, CP=0.77, MAE=231, MPE=9%; Peru, CP=0.76, MAE=686, MPE=18% and the United States of America, CP=0.93, MAE=799, MPE=4%. This resulted in powerful machine learning tools although it is necessary to use specific algorithms depending on the data and the stage of the country’s pandemic.

Generative AI has gained enormous interest nowadays due to new applications like chatGPT, DALL E, Stable Difussion and Deep Fake. Particularly DALL E, Stable Difussion and others (Adobe Firefly, ImagineArt...) are able to create images from a text prompt and are also able to recreate real photographs. Due to this fact, intense research has arisen to create new image forensics applications able to distinguish between real captured images and videos and artificial ones. Detecting forgeries made with Deep Fake is one of the most researched issues. This paper is about another kind of forgery detection. The purpose of this research aims to detect photo realistic AI created images versus real photos coming from a physical camera. For this purpose, techniques that perform a pixel level feature extraction are used. First one is Photo Response Non-Uniformity (PRNU). PRNU is a special noise due to imperfections on the camera sensor that is used for source camera identification. The underlying idea is that AI images will have a different PRNU pattern. Second one is Error level analysis (ELA). This is other type of feature extraction traditionally used for detecting image editions. In fact, ELA is being used nowadays by photographers to detect manually AI created images. Both kinds of features are used to train Convolutional Neural Networks to differentiate between AI images and real photographs. Good results are obtained achieving accuracy rates over 95%. Both extraction methods are carefully assessed by computing precision/recall and F1-score measurements.

Mammary neoplasm affects a population of intact and elderly female dogs and 50% are malignant. In order to study this disease, cell culture is as a promising preclinical model, creating the opportunity to deposit cell lines at a cell bank, allowing a great reproducibility of the assays and making the validation of the results more reliable. Another important aspect is the possibility to establish models for better understanding tumour characteristics, such as vasculogenic mimicry. Due the importance of cancer cell lines in preclinical models, this study aimed to establish and characterize primary cell lines from canine mammary gland tumours according to immunophenotype and tumorigenicity, and with its ability to form vasculogenic mimicry-like structures in vitro and in vivo. Cell cultures were evaluated for morphology, phenotype, vasculogenic mimicry and tumorigenicity abilities. We collected 17 primary mammary carcinoma and 3 metastasis and had a satisfactory result in 10 of them. All cell lines presented spindle shape or polygonal morphology and expressed concomitant pan-cytokeratin and cytokeratin 8/18. Four cell lines had vasculogenic mimicry ability in vitro and two of them showed in vivo tumorigenic potential and forming VM in the xenotransplant tumour. Cell characterization of those lines will help to create a database for more knowledge of mammary carcinomas in dogs, including studies of tumour behaviour and new therapeutic targets.

Background: Different investigations have shown an association between the eating behavior of children and adolescents, and their nutritional status. The objective is to identify eating behavior patterns associated with nutritional status diagnosed by anthropometry in a sample of Spanish schoolchildren. Methods: A cross-sectional study in 283 Spanish schoolchildren (6 to 16 years old). Methods: The sample was assessed anthropometrically by Body Mass Index (BMI), Waist-to height ratio (WHtR) and body fat percentage (%BF). Eating behavior was analyzed using the CEBQ "Children's Eating Behavior Questionnaire" answered by parents or guardians. Results: A positive association was found between excess weight, abdominal obesity, high adiposity, lower scores in anti-intake subscales and higher scores in pro-intake subscales. These were mainly associated with lower satiety response, higher food intake, higher food enjoyment, higher eating speed, and emotional overeating. Conclusion: Our results support the usefulness of the CEBQ as an easy-to-use tool to identify eating behaviors associated with the development of childhood and adolescent obesity. Its use in future research could help to understand behavioral phenotypes in schoolchildren and guide nutrition education and obesity prevention initiatives

In this study, we propose an augmentation method for machine learning based on relabeling data in caregiving and nursing staff indoor localization with Bluetooth Low Energy (BLE) technology. Indoor localization is used to monitor staff to patient assistance in caregiving and to gain insights into workload management. However, improving accuracy is challenging when there is a limited amount of sensor data available for training. In this paper, we propose a data augmentation method to reuse the Received Signal Strength (RSS) from different sensors by relabeling to the sensors with less samples resolving data imbalance. Standard deviation and Kullback-Leibler divergence between minority and majority class are used to measure signal pattern to find matching sensors to relabel. By matching sensors between classes, two variation of relabeling are implemented specifically full and partial matching. The performance is evaluated using real world dataset we collected for five days in a nursing care facility installed with 25 BLE beacons. Random Forest model is utilized for location recognition, and performance is compared using the weighted F1-score to account for class imbalance. By increasing the sensor data with our proposed relabeling method for data augmentation, we achieved higher minority class F1-score as compared to augmentation with Random Sampling, Synthetic Minority Oversampling Technique (SMOTE) and Adaptive Synthetic Sampling (ADASYN). Our proposed method utilizes collected sensor data by leveraging majority class samples. Full matching demonstrated a 6 to 8% improvement from the original baseline overall weighted F1-score.

Annually, an estimated 13-26 million newborns need respiratory support and 2-3 million newborns need extensive resuscitation, defined as chest compression and 100% oxygen with or without epinephrine in the delivery room. Despite such care, there is a high incidence of mortality and short-term neurologic morbidity. The poor prognosis associated with receiving chest compression alone or with medications in the delivery room raises questions as to whether improved cardiopulmonary resuscitation methods specifically tailored to the newborn could improve outcomes. This review discusses the current recommendations, mode of action, different compression to ventilation ratio, continuous chest compression with asynchronous ventilations, chest compression and sustained inflation optimal depth, and oxygen concentration during cardiopulmonary resuscitation.

In this paper, a new anode environmentally friendly for hydrogen production was developed based on 430 stainless steel with an electrodeposited cobalt layer. The novelty of this work is the cobalt source once the electrodeposition bath was obtained from recycling of spent Li-ion batteries cathode with composition LiCoO₂. The electrodeposited cobalt behaves as supercapacitor in KOH 1M. In the linear voltammetry in KOH 1M, when the overpotential reaches 370 mV, the anodic density current for 430 SS/Co is 19 mA cm⁻². Thus, the anode developed in this paper achieves the double of density current with half of production cost if compared with 316SS. Moreover the anode construction described in this paper is an excellent option for Li- ion battery recycling.

In this paper the application of recycled Li-ion batteries spent cathode (LIB-SC) combined with NaHCO₃/H₂O₂ system is presented for the first time in the literature as an alternative for degradation of potentially toxic organic molecules. The model pollutant choice was methylene blue molecule. The spent cathode composition corresponds to LiCoO₂, which was proved by the XRD and EDX. Regarding the decolorization of methylene blue solution, the addition of NaHCO₃ in comparison with only H₂O₂ reduces the complete decolorization time in 96%. This reduction occurs because the radical CO₃ is more stable than OH. In this way, the application the system proposed in this article is aimed at solving two major global problems: the disposal of cell phone batteries and the pollution of liquid effluents.

The present study explores the potential impact of peers' omnipresence at school on children's academic performance. We tested 99 fourth-graders either alone or with a classmate in a task involving both numeracy and literacy skills: numerosity comparison and phonological comparison. Ninety-seven college-aged young adults were also tested on the same task, either alone or with a familiar peer. Peer presence yielded a reaction time (RT) speedup in children, and this social facilitation was at least as important as that seen in adults. RT distribution analyses indicated that the presence of a familiar peer promotes the emergence of adult-like features in children. This included shorter and less variable reaction times (confirmed by an ex-Gaussian analysis), increased use of an optimal response strategy and, based on Ratcliff’s diffusion model, speeded up non decision (memory and/or motor) processes. Peer presence thus allowed children to, at least, narrow (for demanding phonological comparisons), and, at best, virtually fill in (for unchallenging numerosity comparisons) the developmental gap separating them from adult levels of performance. These findings confirm the influence of peer presence on skills relevant to education and lay the ground for exploring how the brain mechanisms mediating this fundamental social influence evolve during development.

In Tunisia, olive is the most cultivated fruit crop while in the north where rainfall exceeded 400mm.year-1, the olive growing area is in widely extension in marginal soil with high slope gradient. Thus, the inclusion of cover crops is a sustainable solution to increase the ecosystem productivity, improve the soil fertility and oil yields. But, in Tunisia a few study were investigated the effect of legumes cover crop on the olive productivity. Therefore, the aim of this study was to evaluate the short-term (two cropping seasons s 2021 and 2022) effects of different seeded cover crops and soil management practices on the cover crops and soil characteristics, as well as enzymes activities and related microbial diversity. Six intercropping were tested in rainfed olive orchards (cv.Chétoui): Spontaneous vegetation (Spont), Wheat, Vetch, Oat, Fenugreek, mixture Vetch-Oat and compared to control (3 periodic tillage/year without intercropping). During the first cropping season, cover crops were cut as animal feed and only residues were incorporated into the soil. While, during the second year, all cover crops biomass were incorporated into the soil. Results indicate that the dry biomass and carbon uptake were significantly higher in grasses species (Wheat and Oat). But, highest level of nitrogen was found in Fenugreek cover crops. As compared to control, all cover crops including spontaneous vegetation increased soil organic matter and macronutrient level, mainly phosphorus. The most activity of β-glucosidase, phosphatase and arysulphatase was found in the cover crops plot of wheat and oat. In addition, this study improve that the utilization of the carbon sources was dominated by amides, amine and amino-acids in the fenugreek plot; while it was dominated by polymers and carboxylic acids in the case of wheat and oat.

(1) Background: Metabolic syndrome is a strong predictor of cardiovascular disease thus the objective of the study was to verify the prevalence of metabolic syndrome in farmers, as well as to verify the association with sociodemographic, work and lifestyle factors. (2) Methods: Cross-sectional, observational study, carried out with 790 individuals. For the diagnosis of metabolic syndrome, the National Cholesterol Education Program's Adult Treatment Panel III (NCEP-ATP III) and International Diabetes Federation (IDF) criteria were used. Pearson's chi-square test and binary logistic regression were used to verify factors associated with metabolic syndrome (3) Results: The prevalence of MS according to the IDF criteria was 16.3% overall, with 9.7% of women (95% CI: 6.66–16.16) and 6.6% of men (95% CI: 5.17–11.97). According to the NCEP/ATP III criterion, it was 12.3% overall, with 7.5% corresponding to women (95% CI: 6.62 – 13.13) and 4.8% to men (95% CI: 3.5 – 8.70). With regard to the conditions that make up metabolic syndrome, it was found that high density lipoprotein, high blood pressure and high waist circumference were the most prevalent. (4) Conclusions: The prevalence of metabolic syndrome is considerable in the population when compared to other regions, both rural and urban, in Brazil.

This paper investigates the effects of air void topology on hydraulic conductivity in asphalt mixtures with porosity in the range 14%-31%. Virtual asphalt pore networks were generated using the Intersected Stacked Air voids (ISA) method, with its parameters being automatically adjusted by the means of a differential evolution optimisation algorithm, and then 3D printed using transparent resin. Permeability tests were conducted on the resin samples to understand the effects of pore topology on hydraulic conductivity. Moreover, the pore networks generated virtually were compared to real asphalt pore networks captured via X-ray Computed Tomography (CT) scans. The optimised ISA method was able to generate realistic 3D pore networks corresponding to those seen in asphalt mixtures in term of visual, topological, statistical and air void shape properties. It was found that, in the range of porous asphalt materials investigated in this research, the high dispersion in hydraulic conductivity at constant air void content is a function of the average air void diameter. Finally, the relationship between average void diameter and the maximum aggregate size and gradation in porous asphalt materials was investigated.

Plant male sterility refers to the failure in the production of fertile pollen. It occurs spontaneously in natural populations and may be caused by genes encoded in the nuclear (genic male sterility; GMS) or mitochondrial (cytoplasmic male sterility; CMS) genomes. This feature has great agronomic value for the production of hybrid seeds and has been widely used in crops, such as corn, rice, wheat, citrus, and several species of the family Solanaceae. Mitochondrial genes determining CMS have been uncovered in a wide range of plant species. The modes of action of CMS have been classified in terms of the effect they produce in the cell, which ultimately leads to a failure in the production of pollen. Male fertility can be restored by nuclear-encoded genes, termed restorer-of-fertility (Rf) factors. CMS from wild plants has been transferred to species of agronomic interest through somatic hybridization. Somatic hybrids have also been produced to generate CMS de novo upon recombination of the mitochondrial genomes of two parental plants or by separating the CMS cytoplasm from the nuclear Rf alleles

Neck lymphangiomas are rare, benign congenital malformations that predominate in childhood. Most present before the age of two. There are no risk factors related to sex, ethnic origin or predominance on either side, and they can occur in any anatomical location, although the most frequent is in the head and neck. The clinical presentation depends on its location. The most frequent symptom is the existence of a painless mass that grows slowly. Available therapeutic tools include surgery, systemic treatment, and injection of sclerosing agents.

In this paper, the power quality of interconnected microgrids is managed using a Model Predictive Control (MPC) methodology which manipulates the power converters of the microgrids in order to achieve the requirements. The control algorithm is developed for the microgrids working modes: grid-connected, islanded and interconnected. The results and simulations are also applied to the transition between the different working modes. In order to show the potential of the control algorithm, a comparison study is carried out with classical Proportional-Integral Pulse Width Modulation (PI-PWM) based controllers. The proposed control algorithm not only improves the transient response in comparison with classical methods but also shows an optimal behavior in all the working modes, minimizing the harmonics content in current and voltage even with the presence of non-balanced and non-harmonic-free three-phase voltage and current systems

There are several well-described molecular mechanisms that influence cell growth and are relat-ed to the development of cancer. Chemokines constitute a fundamental element which are not only involved in local growth but also affect angiogenesis, tumor spread and metastatic disease. Among them, the C-X-C motif chemokine ligand 12 (CXCL12) and its specific receptor the chemo-kine C-X-C motif receptor 4 (CXCR4) have been widely studied. The overexpression in cell mem-branes of CXCR4 has been shown to be associated with the development of different kinds of his-tological malignancies, such as adenocarcinomas, epidermoid carcinomas, mesenchymal tumors or neuroendocrine neoplasms (NENs). The molecular synapsis between CXCL12 and CXCR4 leads to the interaction of G proteins and activation of different intracellular signaling pathways in both gastroenteropancreatic (GEP) and bronchopulmonary (BP) NENs conferring greater ca-pacity for locoregional aggressiveness, epithelial-mesenchymal transition (EMT) and the ap-pearance of metastases. Therefore, it has been hypothesized how to design tools that target this receptor. The aim of this review is to focus on current knowledge of the relationship between CXCR4 and NENs, with a special emphasis on diagnostic and therapeutic molecular targets.

: Studies on the effects of non-nutritive sweeteners (NNSs) in pregnant women are scarce are conflicting. A major challenge is to accurately assess NNS intake, especially in countries where many foods and beverages have been reformulated with the progressive replacement of sugar by NNSs, due to the implementation of new nutrition labelling policies for preventing obesity. This study aimed to develop and valid a food frequency questionnaire (FFQ) to examine the intake of NNSs in pregnant women. This questionnaire was tested in 29 women in their eighth month of gestation, compared to a 3-day dietary records (3-DR). FFQ validity was assessed using Spearman´s correlation coefficient, Lin´s concordance correlation coefficient (CCC) and Bland-Altman plots. Spearman correlations between NNS FFQ and 3-DR ranged from 0.50 for acesulfame K to 0.83 for saccharin. The CCC ranged from 0.22 to 0.66. Bland-Altman plots showed an overestimation of saccharin, sucralose and steviol glycosides intake by the NNS FFQ, and an underestimation of acesulfame K and aspartame, compared to 3-DR. Overall, the most frequently consumed NNS was sucralose None of the participants exceeded the acceptable daily intake for any of the NNSs evaluated. The FFQ of NNSs appears to be a reasonably valid tool for assessing NNS consumption in pregnant women.

The excessive use of synthetic insecticides in modern agriculture has led to the contamination of the environment and the development of insect resistance. In this study, we evaluated the potential of tangerine (Citrus reticulata L.) peel essential oil (EO) as a natural insecticide against greenhouse whitefly (Trialeurodes vaporariorum W. (Homoptera: Aleyrodidae)), a common pest in greenhouse production. Petroleum ether (PET) and n-hexane (HEX) were used as solvents to extract essential oil (EO) from tangerine peels. The yield of EO was 1.59 % and 2.00 % (m/m) for PET and HEX, respectively. The insecticidal activity of EO was evaluated by measuring the mortality rate (MR) of greenhouse whiteflies at different time intervals. The results showed that PET and HEX extracts of tangerine EO effectively controlled the greenhouse whitefly. With both solvents, it was observed that with doses of 12.5% (v/v), similar results were achieved as with the positive control (corresponding to the commercial insecticide imidacloprid). Additionally, the FTIR analysis found that the EO contained d-limonene, which may be the source of its insecticidal properties. Therefore, tangerine peel essential oil is an excellent natural insecticide candidate for controlling greenhouse whiteflies effectively and sustainably.

Mn-promoted bulk iron catalysts with high specific surface area (82-211 m2.g-1) were synthesized by coprecipitation followed by drying under supercritical conditions. The catalysts were tested in the CO2 hydrogenation reaction. The Mn-promoted iron catalysts showed better textural properties than the bare Fe2O3 catalyst, allowing better dispersion of the active phase, easier reduction of iron oxide, better carburization of iron oxides and higher catalytic activity than the bare Fe2O3 catalyst. The best activity results were obtained by catalyst promotion with a very low amount of Mn (Mn/Fe ratio of 0.05). Upon steady-state conditions (T=340 ºC, total pressure of 20 bar and H2/CO2=3), this catalyst showed high CO2 conversion (44.2%) and selectivity to C2-C4 hydrocarbons (68%, olefin to paraffin ratio of 0.54), while the selectivity to C5+ hydrocarbons, CH4 and CO was about 3.2, 38.5 and 5%, respectively. A close correlation was found between catalyst textural properties and CO2 conversion. The most active MnFe-0.05 catalyst shows high stability during 72 h of reaction related to low amount of soft coke formation and catalyst activation through the formation of χ-Fe5C2 phase during the on-stream reaction.

The increase in global warming due to NOx, CO2, and CH4 harmfully different ecosystems and significantly prejudice world life. A promising methodology in this sense is the pollutant conversion into valuable chemicals from photocatalytic processes by reusable photocatalyst. In this way, the present work aimed to produce a Nb2O5 photocatalyst nanofibers system to convert CO2 by the electrospinning method. Based on the collected data, the nanofibers calcination at 600°C for 2 h resulted in the best condition to obtain a homogeneous surface with an average diameter of 84 nm. As a result, the Nb2O5 nanofibers converted CO2 mostly into CO and CH4, reaching values around 8.5 μmol g−1 and 0.55 μmol g−1, respectively.

Flowering time is a critical stage for crop development as it regulates the ability of plants to adapt to an environment. To understand the genetic control of flowering time, a genome wide association study (GWAS) was conducted to identify the genomic regions associated with the control of this trait in durum wheat (Triticum durum Desf.). A total of 96 landraces and 288 modern lines were evaluated for days to heading, growing degree days, and accumulated day length at flowering across 13 environments spread across Morocco, Lebanon, Mauritania, and Senegal. These environments were grouped into four pheno-environments based on temperatures, day length and other climatic variables. Genotyping with 35K Axiom array generated 7,652 polymorphic SNPs in addition to 3 KASP markers associated to known flowering genes. In total, 34 significant QTLs were identified in both landraces and modern lines. Some QTLs had strong association with already known regulatory photoperiod genes, Ppd-A and Ppd-B and vernalization genes Vrn-A1, and Vrn3. However, these loci explained only 5 to 20% of variance for days to heading. Seven QTLs overlapped between the two germplasm groups in which Q.ICD.Eps-03 and Q.ICD.Vrn-17 consistently affected flowering time in all the pheno-environments, while Q.ICD.Eps-11 and Q.ICD.Ppd-12 were significant only in two pheno-environments and the combined analysis across all environments. These results help clarify the genetic mechanism controlling flowering time in durum wheat and show some clear distinctions to what is known for common wheat (Triticum aestivum L.)

"Hidden hunger", the deficiency of important mineral micronutrients, affects more than 2 billion people globally. Adolescence is unquestionably a period of nutritional risk, given the high nutritional requirements for growth and development, erratic or capricious diets and the increased consumption of snacks. This study applied the rational food design approach to obtain micronutrient-dense biscuits by combining chickpea and rice flours to achieve an optimal nutritional profile, crunchy texture and appealing flavour. The perception of 33 adolescents of the suitability of such biscuits as a mid-morning snack was examined. Four biscuits were formulated, with different ratios of chickpea and rice flours (CF:RF): G100:0, G75:25, G50:50 and G25:75. Nutritional content, baking loss, acoustic-texture and sensory analyses were carried out. On average, the mineral content of biscuits with the CF:RF ratio of 100:0 doubled compared with the 25:75 formula. The dietary reference values for iron, potassium and zinc reached 100% in the biscuits with CF:RF ratios of 50:50, 75:25 and 100:0, respectively. The analysis of mechanical properties revealed that samples G100:0 and G75:25 were harder than the others. Sample G100:0 showed the highest sound pressure level (Smax). Sensory analysis showed that increasing the proportion of CF in the formulation augments the grittiness, hardness, chewiness and crunchiness. Most of the adolescents (72.7%) were habitual snack consumers; 52% awarded scores ≥ 6 to biscuit G50:50 for its overall quality, 24% described its flavour as "biscuit" and 12% as "nutty". However, 55% of the participants could not pinpoint any dominant flavour. In conclusion, it is possible to design nutrient-dense snacks that meet the micronutrient requirements and sensory expectations of adolescents by combining flours naturally rich in micronutrients.

Synthesis of nickel oxide nanoparticles (NiO NPs) is a low cost and ecofriendly route that brings great benefits over chemical and physical methods of synthesis. Our approach consisted of using aqueous extracts from treated waste of Manihot Esculenta (Cassava) as reducing, stabilizing and capping agents for the synthesis of NiO NPs. The results proved this approach might be a viable alternative. Extracts were mixed during 30 minutes with Ni(NO3)2.6H2O leading to NPs formation. NiO NPs were characterized through FTIR, XRD, TEM and Raman spectroscopy. NiO NPs showed different shapes and sizes around 5-10 nm in agreement with the particle size calculated by XRD Scherrer equation.

In this study, we aimed to identify the features of indeterminate choroidal melanocytic lesions visualized on optical coherence tomography angiography (OCTA) and to identify predictors of growth. We retrospectively evaluated 86 patients with indeterminate lesions treated at our cen-tre from 2016 to 2021. Clinical management involved active surveillance followed by brachy-therapy if growth was detected. The lesions were classified into two groups according to wheth-er they grew (small melanomas) or remained stable (choroidal nevi). Growth was detected in 19 (22.1%) lesions. All patients underwent OCTA at baseline. These images were compared to iden-tify possible predictors of growth. Significant between-group differences were observed in thickness (p=0.00), greatest basal diameter (p=0.00), number of risk factors (p=0.00), symptoms (p=0.001; relative risk [RR]: 4.3), orange pigment (p=0.00; RR: 6.02), and ultrasonographic hol-lowness (Kappa sign); p=0.000; RR: 5.3). The melanomas had significantly more vessels with a diameter ≥ 76.3 µm (p=0.02; RR: 2.46). The time to growth in these lesions was significantly shorter (p=0.05) than in lesions with smaller vessels. These findings show that vessel diameter quantified by OCTA can differentiate between choroidal nevi and small melanomas, especially when considered together with clinical risk factors.

CRISPR/Cas9 has emerged as the predominant method for genome editing due to its cost-effectiveness and broad applicability, playing a crucial role in advancing sustainable practices across various sectors. This systematic review leverages the PRISMA methodology to explore CRISPR/Cas9's impact on environmental protection, thereby supporting the Sustainable Development Goals (SDGs). Analyzing data from the Web of Science, the review found significant growth in related publications, with a 30% increase since 2014, predominantly from the US, China, Germany, and the UK. The study categorizes the scientific developments into three trends: advancements in agriculture, gene editing techniques, and biofuel production. Key discussions include the use of CRISPR/Cas9 in developing fourth-generation biofuels and environmental biosensors, as well as its applications in enhancing genetic resilience and controlling invasive species. These innovations highlight CRISPR/Cas9's potential in promoting sustainable resource management and energy generation, marking a pivotal contribution to ecological conservation and sustainability efforts.

Polymorphism of vitamin D3 receptor (VDR), has been associated with low bone mineral density and other immune and metabolic disorders; however, its impact on mortality of female dialysis patients is not well studied. This study aimed to identify bone mass-related factors, VDR gene polymorphism, and their interaction with morbid conditions that could influence all-cause mortality. In 246 female dialysis patients, age 43±11 years on continuous ambulatory dialysis peritoneal; 48%, haemodialysis; 23% and automated peritoneal dialysis; 29%. Tscore, Ca, PO4, albumin, hs-CRP, osteoprotegerin, fetuin, osteocalcin, iPTH, PINP and β-CTx were measured. PCR products were digested with Bsml to analyze VDR polymorphisms. Patients n=229; were followed for a median of 17 (15-31) months; 42 patients died. Bsml polymorphism, bb=64% and BB+Bb=36%. Hs-CRP was the risk of death in multivariate Cox Analysis. Patients with bb and inflammation had a higher risk of death (HR 2.48, 95% CI 1.08-5.68) persisted after adjustment for age, diabetes and iPTH (HR 2.33; 95% CI, 1.01-8.33) and after further adjustment for vintage, albumin, osteoprotegerin and vitamin D therapy (HR 3.49; 95% CI, 1.20-10.9). We may conclude that the presences of the bb genotype of VDR and inflammation have additive effects on all cause-mortality in females in CAPD, APD, and HD patients.

Electrical Resistance Tomography (ERT) has been used in the literature to monitor the gas-liquid separation. However, the image reconstruction algorithms used in the studies take a considerable amount of time to generate the tomograms, which is far above the time scales of the flow inside the inline separator and, as a consequence, the technique is not fast enough to capture all the rele-vant dynamics of the process, vital for control applications. This article proposes a new strategy based on the physics behind the measurement and simple logics to monitor the separation with a high temporal resolution by minimizing both the amount of data and the calculations required to reconstruct one frame of the flow. To demonstrate its potential, the electronics of an ERT system are used together with a high-speed camera to measure the flow inside an inline swirl separator. For the 16-electrode system used in this study, only 12 measurements are required to reconstruct the whole flow distribution with the proposed algorithm, 10x less than the minimum number of measurements of ERT (120). In terms of computational effort, the technique was shown to be 1000x faster than solving the inverse problem non-iteratively via the Gauss-Newton approach, one of the computationally cheapest techniques available. Therefore, this novel algorithm has the potential to achieve measurement speeds in the order of 104 times the ERT speed in the context of inline swirl separation, pointing to flow measurements at around 10kHz while keeping the aver-age estimation error below 6 mm in the worst case scenario.

This article introduces an innovative design method for public lighting systems that surpasses the limitations of conventional approaches, which rely on predefined lamp characteristics and spatial arrangement. By employing a multi-criteria decision algorithm, our study proposes an optimal design methodology considering several key aspects, including the distance between lamps, their type, power, and light distribution. The goal is to achieve optimal illumination that enhances visibility on public roads for drivers and pedestrians while simultaneously minimizing glare, installation costs and maximizing energy efficiency. The proposed methodology is implemented through an algorithm developed in Matlab, with results validated through simulations in Dialux. This information is used to construct a decision matrix, assessed using the CRITIC method across 180 different scenarios within a specific case study. The findings demonstrate the effectiveness of multi-criteria decision-making as a tool for significantly improving the planning and design of lighting in public illumination systems, allowing for selecting the optimal combination of parameters that ensure the best lighting conditions.

Risk management of electric power transmission lines requires knowledge from different areas such as environment, land, investors, regulations, and engineering. Despite the widespread availability of databases for most of those areas, integrating them into a single database or model is a challenging problem. Instead, in this paper, we use a single source, the Brazilian National Electric Energy Agency’s (ANEEL) weekly reports, which contains decisions about the electrical grid, comprising most of the areas. Since the data is unstructured (text), we employed NLP techniques such as stemming and tokenization to identify keywords related to common causes of risks provided by an expert group on energy transmission. Then, we used models to estimate the probability of each risk. Our results show that we were able to estimate the probability of 97 risks out of 233.

Asthma is a significant public health concern. This study identified the provinces with the highest morbidity and mortality rates due to asthma among the working-age population (15-69 years) in the Republic of Ecuador. The secondary objective was to explain the possible differences attribut-able to occupational exposure. This nationwide ecological and exploratory study was conducted in 24 provinces between 2016 and 2019. Government databases were used as sources of infor-mation. Standardized rates were calculated for codes the J45 and J46. The hospitalization mor-bidity rate for asthma decreased from 6.51 to 5.76 cases per 100,000 working-age population, and the mortality rate has consistently been low and stable from 0.14 to 0.15 deaths per 100,000 working-age population. Geographic differences between the provinces were evident. The risk of hospitalization and death due to asthma was higher in the Pacific coast (five provinces) and the Andean region (two provinces). The high rates observed in provinces with greater agricultural and industrial development could be the main determinants of national heterogeneity and could act as occupational risk factors. The contribution of occupational hazards in each province should be examined in depth through ad hoc studies. These findings provide valuable information for creating public policies aimed at promoting and safeguarding the respiratory health of the popu-lation, particularly that of workers.

Primary Health Care is crucial in the healthcare system, being the first level of contact with health services for users and patients to take action using the available resources. Patient care units are created to facilitate direct user participation through the circuit of complaints, grievances, and suggestions, allowing the analysis of the population's unmet expectations and needs. To study complaints and grievances regarding the treatment and information received by users in the Santiago and Barbanza healthcare area during the year 2022. A descriptive cross-sectional study was conducted, in which complaints filed by patients in the year 2022 in the Santiago and Barbanza healthcare area were analyzed. A total of 326 users who filed a total of 512 complaints were studied in the year 2022, with 358 (70.0%) related to treatment/information. The mean age was 33.5±16.2 years. 72.4% were women (n=236). A Pearson correlation was performed to establish whether there was a dependence between the number of healthcare visits in both primary care and hospital settings in 2022 and the number of complaints filed in the same year. Pearson correlation coefficient was 0.14; 95% CI (0.02 - 0.27), p=0.012. There is a correlation between the number of consultations and the number of complaints filed. Frequent users are more likely to file a complaint. However, there is no correlation between the number of consultations and the likelihood of filing a complaint regarding treatment/information. Therefore, there seems to be a good relationship between healthcare personnel and users, which impacts patient satisfaction.

This article presents a method that uses a semi-automatic algorithm for the detection and analysis of microcracks in steel test specimens using binarized image analysis. It obtains the length along the crack path in contrast to previous methods that have obtained linear length, thereby achieving a closer approximation to its actual value. Additionally, this method automatically calculates the COD and COA parameters with measurement deviations in micrometres, thus providing greater precision than previous methods proposed to date.

This study analyzed the CO2 capture potential for Parque Natural Regional Serrania de las Quinchas buffer area in Colombia. For this purpose, multitemporal analysis for land covering for years 1989, 2000, 2006, 2011, 2017 and 2021 was made using the Normalized Difference Vegetation Index (NDVI), and Corine Land Cover (CLC) methodology. In the same way, Aboveground Biomass (AGB) was measured for representative parcels by measuring tree’s diameters and heights and applying the adequate allometric models; carbon content in soils was measured too. Results show that dense forest has grown since 1989 and the carbon stock in all the vegetation covers increased by 14,3% from 1989 until 2021, using literature data for tropical humid forests. If measured AGB values obtained in this study are used, the carbon stock average is 3 times this value. Measured carbon average content in AGB was 374,3 Ton C/Ha, well above the average for the content reported for humid tropical forests in Colombia; carbon content in soils was 897,19 Ton/Ha, 2,4 times that found in the AGB. In total, an average of 1271,49 Ton C/Ha (AGB+ soil) was found and a pattern of dense forest recovery was found, but in a more dispersed way than in the past. A very interesting potential for existing forests recovery was found for this area. Strategies for this include the development of sustainable practices, land use management, everything pursuing biodiversity preservation and the participation and leading of the local communities.

Edible insects can diversify diets, improve livelihoods, contribute to food and nutrition security, and have a smaller ecological impact. European Union has categorized insects as novel food, and recently, in 2021 and 2022, two species: Tenebrio molitor and Acheta domesticus have been authorized for commercialization. Acceptance and perception of food risk derived from insect consumption vary depending on factors impacting insect consumption acceptability, including neophobic tendencies, gender differences, familiarity, and gastronomic perceptions. The aim of this work was to evaluate the perception and acceptance of edible insects by exploring those factors. The study was carried out on higher education students from Universities from Valencia (Spain). Students recognize insects for their high nutritional value, particularly protein content, and have varying knowledge levels about specific nutritional components. In terms of labeling and marketing, removing health and sustainability benefits from packaging can improve consumer responses. Most respondents prefer clear labeling of insect derivatives, quality certification seals, and complete information about insect content. Students consider marketing and knowledge as significant influencers of insect consumption. In summary, the text highlights the multifaceted nature of insect consumption acceptability. These insights offer valuable perspectives on insect consumption dynamics.

The RMA11 water quality model, which has been previously calibrated and validated, was coupled with the RMA10 3D hydrodynamic model to evaluate sanitation scenarios in Buenaventura Bay. The bay receives direct discharge of untreated wastewater from 500,000 people through 695 outlets along the coast. Five different effluent reduction scenarios were proposed and compared based on fecal coliform concentration as an indicator. The areas where values exceed the standard for primary contact were also used to evaluate the scenarios. The model results indicate poor water quality in the bay and how that the situation will become even more severe if immediate action is not taken. The proposed reduction in discharges in stages will have temporarily more severe effects than the current situation, but these will end when the treatment plant becomes operational. However, even with the plant in operation, complete sanitation of the bay cannot be achieved, and further measures must be considered.

In this paper, we introduce a computational procedure that enables autonomous LEO laser trackers endowed with INSs to increase the current accuracy when shooting at middle distant medium-size LEO debris targets. The code is designed for the trackers to throw the targets into the Atmosphere by means of ablations. In case that the targets are eclipsed to the trackers by the Earth, the motions of the trackers and targets are modeled by equations that contain post-Newtonian terms accounting for the curvature of space. Otherwise, when the approaching targets become visible for the trackers, we additionally use more accurate equations, which allow to account for the local bending of the laser beams aimed at the targets. We observe that under certain circumstances the correct shooting configurations that allow to safely and efficiently shoot down the targets, differ from the current estimations by distances that may be larger than the size of many targets. In short, this procedure enables to estimate the optimal shooting instants for any middle distant medium-size LEO debris target.

The sustainability of Indigenous Socioecological Systems (ISES) faces significant threats from global anthropogenic environmental changes, endangering Indigenous People (IP), who safeguard a substantial portion of the world's natural capital. Indigenous Traditional Food Systems (ITFS) are crucial within ISES, providing not only diverse and nutritious food but also holding cultural, spiritual, and economic significance. Despite embodying sustainable lifestyles, Indigenous voices remain underrepresented in climate and sustainability discussions. Addressing this gap, the research adopts the Political Ecological Theoretical Framework (PETF) to analyze the regulatory impact on the adaptability, resilience, and sustainability of ITFS. Two Indigenous communities, the Karen in Thailand and various groups in the Republic of Sakha (Yakutia) in Russia, serve as case studies. The study aims to establish a theoretical framework integrating Indigenous concerns into policies and regulations, emphasizing self-determination, cultural preservation, and land rights. Findings emphasize the necessity for comprehensive legal frameworks prioritizing Indigenous involvement in climate resilience and sustainability efforts, moving beyond symbolic gestures towards meaningful collaboration and decision-making power. Recognizing Indigenous vulnerability and engaging them as active partners is essential for navigating climate challenges within ISES and ITFS.