Lipid nanoparticles have an interesting part of drug delivery system. In this study, the modification of the convention nano-lipid based soybean lecithin was demonstrated. Ginger oil derived Zingiber officinale was used along with lecithin, cholesterol and span 80 to fabricate nano-lipid (GL nano-lipid) using thin-film method. Through TEM and confocal microscope, GL nano-lipid exposes the liposome- like morphology. The average size of the resultant nanoparticles was 249.1nm with monodistribution (PDI= 0.021). The ζ-potential of GL nano-lipid was negative as similar to as prepared nano-lipid based lecithin. GL nano-lipid express the highly stable over 60 days of storage at room temperature in term of size, ζ-potential. A shift of pH value from alkaline to acid was detected in lecithin nano-lipid, while with the incorporation of ginger oil, pH value of nano-lipid dispersion was around 7.0. Furthermore, due to the rich of shogaol-6 and other active compounds in ginger oil, the GL nano-lipid is endowed with intrinsic antibacterial feature. In addition, the sulforhodamine B (SRB) assay and live/dead imaging revealed the excellent biocompatibility of GL nano-lipid. Notably, GL nano-lipid was capable to carry the hydrophobic agents as curcumin and perform a pH-dependent release profile. A subsequent characterization are a suitable potential for drug delivery system.

In table tennis competitions the rule violation judgment with the greatest controversy is the height of the ball serve. This is because inaccuracy in the ball height judgment, which results in erroneous judgment, is unavoidable. Thus, we designed an automatic image judgment auxiliary system for table tennis ball height during service in this study. We used a high-speed camera to record the ball toss in the table tennis service. The designed algorithm architecture can automatically search for the ball and the position of the hand action under low light source conditions. The algorithm is mainly divided into hue-saturation-value color space processing and morphology processing using Hough transform to search for the circular ball. Experiment result shows that color segmentation can successfully and accurately determine the ball position under low light conditions. The morphology method can find the position of the hand and help determine the moment when the ball leaves the hand during the service ball toss. Finally, the actual size of the target is used to estimate the actual distance unit represented by the image pixel.

While a raft of existing Chinese literature examines the associations between the outbreak of the pandemic and students’ mental health, rarely do Chinese studies assess the nuanced relationships between digital learning, parenting, and students’ mental health since the coronavirus (COVID-19) outbreak. Such a rarely discussed topic has substantial scholarly value as mismanagement of digital learning and parenting, such as the exposure to cyberbullying and negative parenting during the public health crisis, could add substantial, unforeseeable psychological burdens for Chinese students. In this article, the author applied a systematic review to find all relevant Chinese literature that contains the words “digital learning”, “children/adolescents”, “mental health”, and “parenting” published since January 2020. As such a complex topic has rarely been addressed in Chinese contexts, the author was only able to find four related scholarly articles. The author summarises the arguments and empirical findings to explore the nuanced relationships between a) digitalisation, isolation, parenting, and children’s mental health, b) parenting, teacher-student relationships, and students’ mental health, and c) maternal and paternal parenting styles.

This paper aims to build up a preference function to evaluate the public benefits of the type of agricultural farming, biodiversity, water provisions, land use type, ecotourism modes, and a monetary attribute (environmental trust fund and willingness to contribute) associated with an ecosystem service and land use program in a forest park. This study used the choice experiments to build a random utility model, analyze the average preference for the above land use attributes based on the conditional logit and used a latent class model to test the resident’s heterogeneous preferences for land use planning in the forest park. We also estimated the welfare derived from various land use programs. The empirical result had shown that: (1) increasing organic farming area, maintaining the status quo of species biodiversity, increasing the surface water provision, increasing the area of custom flora, increasing the wetland area, and setting up an integrated framework for ecotourism increase the public’s preference for the land use program; (2) we found that farmer and non-farmer haven’t the same land use preferences; (3) the ecotourism development program incorporating biodiversity, organic farming, ethnobotany, and wetland area with integrated ecotourism are more preferred than other land use program scenarios.

Exisitng studies argue life chances are, in part, vertically reproduced. Such a statement is applicable to the Chinese contexts as, but not limited to, parental hukou status, to some extent, determines the life chances their children receive. In this essay, the author would like to introduce human capital theory (HCT) and educational signalling theory (EST), and assess how the applications of each of these two models can enrich the understanding of vertical reproduction of individuals’ social mobility opportunities. The author would also present the limitations of each of these two models when addressing relevant Chinese contexts.

In aerobic environments, bacteria are exposed to reactive oxygen species (ROS). To avoid an excess of ROS, microorganisms are equipped with powerful enzymatic and non-enzymatic antioxidants. Corynebacterium glutamicum, a widely used industrial platform organism, uses mycothiol (MSH) as major low molecular weight (LMW) thiol and non-enzymatic antioxidant. In aerobic bioreactor cultivations C. glutamicum becomes exposed to oxygen concentrations surpassing the air saturation, which are supposed to constitute a challenge for the intracellular MSH redox balance. In this study, the role of MSH was investigated at different oxygen levels (pO2) in bioreactor cultivations in C. glutamicum. Despite the presence of other highly efficient antioxidant systems, such as catalase, the MSH deficient ΔmshC mutant was impaired in growth in bioreactor experiments performed at pO2 values of 30%. At a pO2 level of 20% this growth defect was abolished, indicating a high susceptibility of the MSH-deficient mutant towards elevated oxygen concentrations. Bioreactor experiments with C. glutamicum expressing the Mrx1-roGFP2 redox biosensor revealed a strong oxidative shift in the MSH redox potential (EMSH) at pO2 values above 20%. This indicates, that the LMW thiol MSH is an essential antioxidant to maintain the robustness and industrial performance of C. glutamicum during aerobic fermentation processes.

This study is to explore the feasibility using neural network (NN) and deep learning to diagnose three common respiratory diseases with only few symptom words. These three diseases are nasopharyngitis, upper respiratory infection, and bronchitis/bronchiolitis. Through natural language processing, the symptom word vectors are encoded by GPT-2 and classified by the last linear layer of the NN. The experimental results are promising, showing that this model achieves a high performance in predicting all these three diseases. They reach 90% in accuracy, which suggests the implications of the developed model, highlighting its potential use in assisting patients understanding their conditions via a remote diagnosis. Unlike previous studies that focus on extracting various categories of information from medical records, this study directly extracts sequential features from unstructured text data, reducing the effort required for data pre-process.

In this review, we trace the evolution of the quantum spin-wave theory treating non-collinear spin configurations. Non-collinear spin configurations are consequences of the frustration created by competing interactions. They include simple chiral magnets due to competing nearest-neighbor (NN) and next-NN interactions and systems with geometry frustration such as the triangular antiferromagnet and the Kagomé lattice. We review here spin-wave results of such systems and also systems with the Dzyaloshinskii-Moriya interaction. Accent is put on these non-collinear ground states which have to be calculated before applying any spin-wave theory to determine the spectrum of the elementary excitations from the ground states. We mostly show results from a self-consistent Green’function theory to calculate the spin-wave spectrum and the layer magnetizations at finite T in two and three dimensions as well as in thin films with surface effects. Some new unpublished results are also included. Analytical details and the validity of the method are shown and discussed.

Porcine circovirus type 2 (PCV2) is a small non-enveloped DNA virus that causes swine immunosuppression by inducing apoptosis in lymphocytes. The ORF3 protein plays a major role in PCV2-induced apoptosis in porcine kidney cells, but there is little information regarding this protein in PCV2-infected lymphocytes. In this study, hybridoma screening and epitope mapping were determined by using an indirect ELISA. The mAb 7D3 against ORF3 peptide (residues 35–65) of PCV2 were generated in this study. In vivo situation, the mAb 7D3 recognized ORF3 protein existed in PCV2-infected apoptotic porcine PBMCs. It is noteworthy that thimerosal interfered with the binding of mAb 7D3 to epitope and it was diminished by adding cysteine. Additionally, thimerosal interacting with cysteine-containing peptide was demonstrated by the PTI assay. Furthermore, thimerosal specifically interacted with the antigen-binding sites of mAb 7D3. This study suggested that thimerosal blockade the occlusion of the antigen-binding sites of mAb 7D3 to bind ORF3 peptide (residues 35–65) via thimerosal interacting with cysteine residues which should be located within the antigen-binding sites of mAb 7D3. Overall, the mAb 7D3 has been characterized and it will be a valuables tool in future studies of ORF3 function and the wider mechanism of cell apoptosis caused by PCV2 infection. Similarly, these techniques will be useful for applications in detecting thimerosal too.

In this study, we present a federated learning approach that combines a multi-branch network and the Oort client selection algorithm to improve the performance of federated learning systems. This method successfully addresses the significant issue of non-iid data, a challenge not adequately tackled by the commonly used MFedAvg method. Additionally, one of the key innovations of this research is the introduction of uniformity, a metric that quantifies the disparity in training time amongst participants in a federated learning setup. This novel concept not only aids in identifying stragglers but also provides valuable insights into assessing the fairness and efficiency of the system. Experimental results underscore the merits of the integrated multi-branch network with the Oort client selection algorithm and highlight the crucial role of uniformity in designing and evaluating federated learning systems.

COVID-19 pandemic and its restrictive measures have present serious unprecedented challenges to human eating behavior. Given that Google Search has become a valuable information resource to examine, predict, and estimate human online interests and behavior, that somehow linked to real people concerns. This study aimed to investigate the features and evaluate the impacts of the COVID-19 pandemic and its lockdown on consumer worldwide interest in eating behavior and its related factors. Google Trends-Relative Search Volumes (RSV) of distinct keywords related to eating behavior, were obtained from a timeframe before and during the COVID-19 pandemic, from January 1, 2018, to December 13, 2020. During the global lockdown from March 11, 2020, to June 30, 2020, RSV curves exhibited a short-term fluctuation of interest in multiple keywords related to eating behavior and its related factors such as food purchasing, food security, food poisoning, panic buying, stocking up, health awareness and mental illness. Spearman’s correlation analysis showed a strong correlation between daily confirmed cases and examined keywords. Univariate repeated measures ANOVA following with Bonferroni Post-hoc test revealed that during the year with the presence of COVID-19 pandemic, people worldwide pay more concerns in each keyword (1) environmental and economic factors (unemployment: +269%, food shortage: +180%, food bank: +50%); (2) health- and food-safety concerns (immunity: +138%, vitamin C: +90%, vitamin D: +55%, zinc: +47%, food storage containers: +40%, food packaging: +31%); (3) food choices and interest (local meat: +84%, frozen food: +67%, CSA: +65%, flour: +66%, bread: +53%, soybean oil: +45%, local fruit: +43%, canned tomato: +42%, refrigerated food: +41%, canned meat: +39%, pancake: +37%, cookie: +29%, butter: +29%, canned fish: +29%, liquior: +20%); (4) social and individual factors (take-out: +128%, deliver: +53%), (6) lifestyle factors (stationary bicycle: +110%, dumbbell: +89%, yoga mat: +84%, treadmill: +65%, grocery store: +51%); (6) psychological factors (isolation: +113%). COVID-19 pandemic and its lockdown have had far-reaching effects on global concerns in many factors related to human eating behavior. Swift action is necessarily performed to strengthen the resilience of the food supply chain system, support and adapt to the new normal behavior, and mitigation the profound negative changes, especially targeting those in high-risks and vulnerable groups and food-insecure regions.

Construction productivity entails a wide range of work combinations. When human resources are scarce, it is critical to replace manpower with machinery, and calculating machinery productivity is crucial. Traditional labor productivity methods, however, cannot address dredging complex multi-attribute decision-making (MADM) problems. Aiming to address the limitations of the traditional labor productivity method, this paper extends the data envelopment analysis (DEA) and proposes a new dredging productivity evaluation method. The proposed method can solve the problem of evaluating various combinations of factors (single-input, multiple-input, sin-gle-output, and multiple-output) and the problem suggesting that the efficiency of the DEA method'scalculation results is equal to 1. The effectiveness of the proposed method was verified using reservoir dredging examples. The simulation results show that the proposed method has broad applicability, can accurately evaluate the related dredging performance issues, and provide directions for construction managers to improve labor productivity.

Curcuma longa is only a rich source of curcumin (1) and its major analogues demethoxycurcumin (2) and bisdemethoxycurcumin (3) among the Curcuma species. The content ratio of these three curcumins in turmeric is depended on the varieties and growing environment. Recently, curcumin (1) has been reported as potential inhibitor of hepatic and enzymatic protein tyrosine phosphatase 1B (PTP1B) and its related disorders such as hypertriglyceridemia, hyperlipidemia and liver steatosis. Thus, we further purified curcumins (1–3) from C. longa and investigated their inhibitory effects against PTP1B and α-glucosidase enzymes. As the result, curcumins (1–3) exhibited potential PTP1B inhibition with IC50 values of 37.8 ± 1.4, 45.3 ± 0.7, and 72.6 ± 1.1 μM, respectively, and α-glucosidase inhibition with similar manner (IC50 values of 78.2 ± 0.2, 82.4 ± 0.6, and 90.6 ± 1.0 μM, respectively). These results reveal a key role of methoxylation in the variation of PTP1B and α-glucosidase inhibitory activity for these curcumins. In addition, density functional theory (DFT) was used accompanying with molecular docking (MD) to analyze the ligand stability and the interaction of curcumins (1–3) with PTP1B and glucoside hydrolase proteins. Assay-based results and the MD data obtained are highly correlation suggesting that the deterioration of the enzyme activity caused by the distortion of structural conformation of PTP1B and glucoside hydrolase may be related to the arrangement of amino acids in protein structure. This reported for the first time that inhibitory effects of curcumins (1–3) against PTP1B and glucoside hydrolase have been examined in vitro and in silico as well.

Due to their excellent physicochemical properties, fluorinated greenhouse gases (F-gases), including hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulfur hexafluoride (SF6), and nitrogen trifluoride (NF3), are used in a variety of applications, but they are potent greenhouse gases. Therefore, they have been blanketed into the list of phase-out under the international protocols or treaties. In this work, the updated statistics of the Taiwan’s national inventory report (NIR) were used to analyze the trends of F-gases (i.e., HFCs, PFCs, SF6 and NF3) emissions during the period of 2000-2020. Furthermore, the regulatory strategies and measures for reducing the emissions of the four F-gases will be summarized to be in accordance with the national and international regulations. With the progressive efforts by the regulatory requirements and the industry’s voluntary reduction, the total F-gases emissions indicated a significant increase from 2,462 kilotons of carbon dioxide equivalents (CO2eq) in 2000 to the peak value (i.e., 12,643 kilotons) of CO2eq in 2004, but sharply decreased from 10,284 kilotons of CO2eq in 2005 to 3,906 kilotons of CO2eq in 2020. It was also found that the most commonly used method for controlling the emissions of F-gases from the semiconductor and optoelectronic industries was based on the thermal destruction-local scrubbing technology.

This paper presents a deep learning-based multi-guidance line detection approach, enabling an autonomous four-wheeled agricultural robot to navigate strip farmland. The integration of Proportional-Integral-Derivative (PID) and Fuzzy Logic Control (FLC) systems optimizes the velocity and heading angle of robot, facilitating smooth navigation along identified guidance line. Enhance cornering maneuverability with real-time kinematics (RTK)-assisted Global Navigation Satellite System (GNSS) (RTK-GNSS) positioning. Additionally, the spraying system combined with deep learning can effectively identify weeds and crop nutrient deficiencies to achieve precise spraying. The guidance system prioritizes irrigation lines for navigation, with additional guidance from crop and furrow lines. Trigonometric analysis determines the angular deviation between the identified guidance line and the vertical line of the top view image. Experiments under diverse weather conditions demonstrate the stable navigation of robot at 12.5 cm/s, achieving up to 90% accuracy in weed and nutrient deficiency identification. The spraying accuracy for weeds and deficiencies averages 87% and 73%, respectively, underscoring the system's contribution to sustainable and precision horticulture practices.

The betel nut chewing habit of taxi drivers has shown that can promote companionship, relaxation, and emotional stability at work. 19.3% of betel nut behaviors are instigated by an invitation among drivers to engage in the habit. The objective of this study was to explore the impact of social learning, subjective norm, and self-efficacy on betel nut chewing in taxi drivers in Taiwan. We conducted a cross-sectional study on taxis’ driver of betel nut behaviour and measured their evaluations of its consequences using a self-report questionnaire. Other variables include socio-demographic characteristics and chewing-related experience. The overall variance is 44.5% in socio-demographic variable, social learning, self-efficacy, and subjective norm. Results show that the variables of affected betel nut chewing behavior, driving years has the strongest influence, followed by learning about betel nut from the media, relatives, and friends, and education level, which positively affect betel nut chewing behavior. Findings indicated that education related to quitting betel nut chewing, significant others, and rules of the taxi fleet are adopted to design a plan for quitting betel chewing to reduce the positive expectations of taxi drivers for betel nut chewing and decrease their betel nut chewing behavior.

In all areas of medicine, especially in radiology, computers are increasing year by year. Filmless radiology, speech recognition software, electronic application forms, and teleradiology are recent developments that have greatly improved radiologists' performance. This research explores radiology software trends, predictions, and the challenges posed by informatics and historical trend analysis. The rationale behind this research is that information technology (IT) is overgrowing almost every day. We must continuously seek new ways to apply IT to make more use of resources. Consequently, IT becomes increasingly crucial to radiology organizations' innovative thinking, workflow, and business models. This study aimed to analyze all radiology software publications in the Science Citation Index (SCI). From 1991 to July 2021, SCI was used to search for publications systematically. We have also widely used this historical method in radiology software research. The findings and discussions are base on an assessment of trends, predictions, contributions, and challenges in radiology software, and we are exploring radiology software with six evolutionary stages. The gift of this research is that radiology managers realize that the use of new information technologies is closely related to survival in a competitive environment. Radiology companies can review these new technologies to develop more innovative business models and services to improve operational deficiencies.

The present study propose an innovative turn-boring operation method and focuses on finding optimal turn-boring process parameters for 15-5PH Stainless steel by considering multiple performance characteristics using Taguchi orthogonal array with the grey relational analysis, the effect of machining variables such as concentration of cutting fluid , temperature of cutting fluid , feed rate, depth of cut and cutting speed are optimized with considerations of multiple performance characteristics namely surface roughness, roundness error and material removal rate, the optimal values were found out from the Grey relational grade. The result of the Analysis of Variances (ANOVA) is shown that the most significant factor is cutting speed, followed by feed rate, concentration of cutting fluid, radial depth of cut and temperature of cutting fluid. Finally, confirmation tests were carried out to make a comparison between the experimental results and developed model. Experimental results have shown that machining performance in the turn-boring process can be improved effectively through this approach.

Surface-enhanced Raman spectroscopy (SERS) is commonly used for super-selective analysis through nanostructured silver layers in the environment, food quality, biomedicine, and materials science. To fabricate a high-sensitivity but more accessible device of SERS, dc magnetron sputtering technology was used to realize high sensitivity, low cost, stable deposition rate, and rapid mass production. This study investigated various thicknesses of a silver film ranging from 3.0 to 12.1 nm by field-emission-scanning-electron microscope, X-ray diffraction, and X-ray photoelectron spectroscopy. In the rhodamine 6G (R6G) testing irradiated by a He-Ne laser beam, the analytical enhancement factor (AEF) of 9.35x108, the limit of detection (LOD) of 10-8 M, and the relative standard deviation (RSD) of 1.61% were better than other SERS substrates fabricated by the same dc sputtering process because the results show that the 6 nm thickness silver layer has the highest sensitivity, stability, and lifetime. The paraquat and acetylcholine analytes were further investigated and high sensitivity was also achievable. The proposed SERS samples were evaluated and stored in a low humidity environment for up to forty weeks, and no spectrum attenuation could be detected. Soon, the proposed technology to fabricate high sensitivity, repeatability, and robust SERS substrate will be an optimized process technology in multiple applications.

Aluminum wire is a common material for wire bonding due to its resistance to oxidation and low price. It does not melt when becoming a free air ball (FAB) during the electronic flame-off (EFO) process with wettability, and is applied by wedge bonding. This study used 20μm Zn-Coated Al-0.5wt.%Si (ZAS) wires to improve the FAB shape after the EFO process, while maintaining stability of the mechanical properties, including the interface bonding strength and hardness. In order to test circuit stability after ball bonding, the current-tensile test was performed. During the experiment, it was found that 80nm ZAS with wire bonding has lower resistance and higher fusing current. For the bias tensile test, the thicker Zn film diffused into the Al-Si matrix easily, after which the strength was reduced. The ball-bond interfaces had no change in their condition before and after the bias. Accordingly, ZAS could be a promising candidate for ball bonding in the future.

EGFR mutations are heterogenous but all carry the same weighting in the Lung-molGPA. The aim of this study was to elucidate the different prognostic implications of molecular subtypes and frontline TKIs in EGFR-mutated lung adenocarcinoma with synchronous brain metastases (BM) using the Lung-molGPA. Medical records were searched in hospital databases from 2011 to 2015. Patients with EGFR-mutated adenocarcinoma and brain metastases who received TKIs were included. The Kaplan-Meier method was used to estimate survival, and multivariate Cox proportional hazard models were used to estimate adjusted hazard ratios (HRs) and 95% confidence intervals (CIs). A total of 256 patients were included with a median overall survival (OS) of 17.2 months. In multivariate analysis of OS, only age (70 versus <70 years, HR:1.71, 95% CI:1.25-2.35, p<0.001), KPS (<70 versus 70, HR:1.71, 95% CI:1.26-2.31, p<0.001), and rare mutations (other versus exon 19 deletions, HR:1.78, 95% CI:1.04-3.05, p=0.037) remained statistically significant. In patients with a Lung-molGPA score 2.5, EGFR molecular subtypes had different median OS (exon 19 deletions versus Leu858Arg versus other, 18.8 vs 12.4 vs 12.1 months, p=0.021). In conclusion, different molecular subtypes treated with frontline TKIs have different prognostic implications in the Lung-molGPA. Further prospective studies are warranted to validate these findings.

This study explores the implementation of an interdisciplinary curriculum in product and media design education and its impact on knowledge innovation and competency development. The curriculum is based on scaffolding theory, incorporating design proposals, workshops, digital design, marketing tests, and marketing activities guided by teachers and mentors from a branded ceramic workshop. The research findings demonstrate that the interdisciplinary curriculum facilitates knowledge innovation and fosters the development of students' professional skills, creativity, and problem-solving skills. The study also highlights the importance of stable scaffolding, including artefact, peer, and teacher support, which significantly contributes to cultivating transformational competencies, as outlined in the 2030 OECD Learning Compass. Additionally, the collaboration with Shanshing Four Seasons Celadon Studio on a patented ceramic product, "Funny Monkey," is a tangible example of the journey towards a triple-helix knowledge economy. This research underscores the importance of interdisciplinary curricula in promoting knowledge innovation and integrating transformational competencies in education. Scaffolding theory provides practical guidance for student learning and teaching strategies, presenting a sustainable roadmap for developing interdisciplinary curricula and offering a concrete and transferable pedagogical prototype for educational innovation.

In recent years, nonalcoholic fatty liver disease/steatohepatitis (NAFLD/NASH) has become a leading worldwide disease, and its therapies are facing many complexities. Peroxisome proliferator-activated receptors (PPARs) are ligand-activated transcription factors that belong to the nuclear receptor (NR) superfamily and have three subtypes: PPARα (NR1C1), PPARβ/δ (NR1C2), and PPARγ (NR1C3). They have been identified to be essential in the regulation of lipid metabolism by controlling the transcription of genes related to fatty acids, bile acids, and cholesterol metabolism. Many PPAR agonists have been reported, such as natural agonists (fatty acids, eicosanoids, and phospholipids) and synthetic ligands (fibrates, thiazolidinediones, glitazars, and elafibranor). PPAR-based chemicals have a breakthrough in the innovation of therapy for fatty liver disease. This review will provide an overview of how PPARα and PPARγ play roles in lipid homeostasis, discussing the consideration of their agonists as potential therapeutic agents for NAFLD/NASH.

This study presents an instant preview and analysis system implementation of intelligent stereo cameras (ISCs). A parameter optimization prototype adopted the instant preview and analysis system of the ISCs has been achieved the automatic alignment function, and obtained optimal stereo films with the automatic alignment function by adjusting gap and angle between dual cameras. The instant preview and analysis system of the ISCs with parameter optimization can enhance the quality of stereo films effectively and reduce filmed errors and save retouched cost and time in harsh filmed environment.

In the face of pressing global challenges, coupling the synergy of dance arts, sustainability, and marketing communications emerges as a potent catalyst for advancing sustainable behavior within society. Although prior research has examined the emotional stimulations raised by dance performance, it has not systematically demonstrated the role of traditional dance as a vehicle for sustainability marketing communications. This study fills this gap by using the AIDA model (Attention, Interest, Desire, Action) as a foundation, conceptualizing dance performance elements into seven dimensions, and incorporating emotional engagement and environmental consciousness to foster sustainable behavior. Collaborating with Taiwanese dance troupe, the research produced a performance titled, ‘The New Dragon Palace Chronicle’, which focuses on the themes of destruction and preservation of underwater life, enriched with cultural and sustainability symbolism. The hypothesis were tested on a sample of 315 Taiwanese audience who watching the performance. The results confirmed that the seven dimensions of the dance elements have substantial validity and reliability, significantly drawing the attention of the audience as preliminary stage of awareness. This attention fosters emotional engagement and amplified environmental consciousness and significantly influences interest, desire, and ultimately, sustainable behavior action. The findings underscore the vital role of dance art performance in nurturing actions that contribute to social sustainability.

Thermally-assisted-occupation density functional theory (TAO-DFT) has been an efficient electronic structure method for studying the ground-state properties of large electronic systems with multi-reference character over the past few years. To explore the time-dependent (TD) properties of electronic systems (e.g., subject to an intense laser pulse), in this work, we propose a real-time (RT) extension of TAO-DFT, denoted as RT-TAO-DFT. Besides, we employ RT-TAO-DFT to study the high-order harmonic generation (HHG) spectra and related TD properties of molecular hydrogen H2 at the equilibrium and stretched geometries, aligned along the polarization of an intense linearly polarized laser pulse. The TD properties obtained with RT-TAO-DFT are compared with those obtained with the widely used time-dependent Kohn-Sham (TDKS) method. In addition, issues related to the possible spin-symmetry breaking effects in the TD properties are discussed.

This article presents a study conducted within a wind tunnel to enhance understanding of the excitation mechanism of stay cable vibration under arid conditions. Numerous wind tunnel tests were meticulously analyzed. Initially, the vibration of the stay cable was measured under steady flow conditions at a flow angle of 45 degrees and an inclination of 25 degrees, while varying wind velocities were applied. Additionally, an investigation into the flow field surrounding the stay cable was conducted in both vertical and horizontal directions. By utilizing two hot wire anemometers in the cable wake, an extensive database of flow field measurements was obtained. The experimental results revealed that the vibration characteristics of the stay cable under the arid conditions considered in this study aligned with findings reported in existing literature. Notably, a deeper comprehension of the excitation mechanism of a stay cable in a dry state was attained. This mechanism is closely associated with the inhibition of Karman vortices and the development of low-frequency vortices. At low wind speeds, Karman vortices predominated, resulting in small-amplitude vibrations. However, as the wind speed increased, the influence of Karman vortices diminished progressively, while the low-frequency vortices grew stronger. These low-frequency vortices exhibited high energy and a significant correlation with shedding along the stay cable, thereby inducing cable vibration in a dry environment.

Aluminum alloy (Al6061) sheet micro-hole processing is extensively used in smartphones, tablet PC, and smart wearable devices. The micro-hole processing is commonly performed using laser, micro drilling, microstamping, micro discharge, and chemical etching technologies. Micro-stamping technology is characterized by precision and rapid processing, but the precision positioning of the punch head and lower die is one of the major difficulties in micro-hole stamping, especially in manufacturing array micro-holes. This study used stamping without die technology. This technology uses an array punch head to punch the lower die holes on the base, then performs array micro-hole stamping. The experimental results show that a micro-hole array with 37 micro-holes were successfully manufactured and can be reproduced many times. Tapered array micro-holes with a high aspect ratio can be manufactured using this stamping without die technology; the micro-hole depth can be 260μm, the inlet diameter is 116μm, and the outlet diameter is 25μm. This study has successfully developed the feasibility of array micro-hole stamping technology.

A road network represents road objects in a given geographic area and their interconnections, and is an essential component of intelligent transportation systems (ITS) enabling emerging new applications such as dynamic route guidance, driving assistance systems, and autonomous driving. As the digitization of geospatial information becomes prevalent, a number of road networks with a wide variety of characteristics coexist. In this paper, we present an area partitioning approach to the conflation of two road networks with a large difference in level of details. Our approach first partitions the geographic area by the Network Voronoi Area Diagram (NVAD) of low-detailed road network. Next, a subgraph of high-detailed road network corresponding to a complex intersection is extracted and then aggregated into a supernode so that a high matching precision can be achieved via 1:1 node matching. To improve the matching recall, we also present a few schemes that address the problem of missing corresponding object and representation dissimilarity between these road networks. Numerical results at Yeouido, Korea's autonomous vehicle testing site, show that our area partitioning approach can significantly improve the performance of road network matching.

In this paper, we present an extended version of the Hadi-Vencheh model for multiple criteria ABC inventory classification. The proposed model is a nonlinear weighted product model (WPM) which determines a common set of weights for all the items. Our proposed nonlinear WPM incorporates multiple criteria with different measure units, without converting the performance of each inventory item in terms of each criterion into a normalized attribute value, thereby providing an improvement over the model proposed by Hadi-Vencheh. Our study mainly includes various criteria for ABC classification, and demonstrates an efficient algorithm for solving nonlinear programming problems in which the feasible solution set does not have to be convex. The algorithm presented in this study improves the solution efficiency of the Canonical Coordinates Method (CCM) algorithm substantially when applied to large scale, nonlinear programming problems. The modified algorithm was tested to compare our proposed model results to the results derived using the Hadi-Vencheh model and demonstrate the algorithm's efficacy. The practical implications of the study are to develop an efficient nonlinear optimization solver by optimizing the quality of existing solutions, thus improving time and space efficiency.

Using smartphone especially android platform has already got eighty percent market shares, due to aforementioned report, it becomes attacker’s primary goal. There is a growing number of private data onto smart phones and low safety defense measure, attackers can use multiple way to launch and to attack user’s smartphones.(e.g. Using different coding style to confuse the software of detecting malware). Existing android malware detection methods use multiple features, like safety sensor API, system call, control flow structure and data information flow, then using machine learning to check whether its malware or not. These feature provide app’s unique property and limitation, that is to say, from some perspectives it might suit for some specific attack, but wouldn’t suit for others. Nowadays most malware detection methods use only one aforementioned feature, and these methods mostly analysis to detect code, but facing the influence of malware’s code confusion and zero-day attack, aforementioned feature extraction method may cause wrong judge. So, it’s necessary to design an effective technique analysis to prevent malware. In this paper, we use the importance of word from apk, because of code confusion, some malware attackers only rename variables, if using general static analysis wouldn’t judge correctly, then use these importance value to go through our proposed method to generate picture, finally using convolutional neural network to see whether the apk file is malware or not.

The signal processing technique is one of the principal tools for diagnosing power quality (PQ) issues in electrical power systems. The Discrete Fourier Transform (DFT) is a frequency analysis technique used to process power system signals and identify PQ problems. However, the DFT algorithm may lead to spectral leakage and picket-fence effect problems for asynchronously sampled signals that contain harmonic, inter-harmonic, and flicker components. To resolve this shortcoming, a hybrid method for frequency estimation based on a second-level DFT approach and a frequency-domain interpolation algorithm to obtain the accurate fundamental frequency of a power system is proposed in this paper. This method uses a second-level DFT to compute the cosine and sine parts for the fundamental frequency components of the acquired signals. Then, a frequency-domain interpolation approach is adopted to determine the amplitude ratio for the cosine and sine parts of the system's fundamental frequency. To demonstrate the performance of the proposed frequency estimation method, the observation window used by this paper to evaluate different estimation algorithms is 200 ms. According to the IEC standards, a 200 ms acquisition window is recommended for power system quality assessment. A set of mixed signals with harmonic, inter-harmonic, and flicker components with the fundamental frequency deviation is used. The evaluation results demonstrate the superiority of the new method over other approaches for assessing asynchronously sampled signals contaminated with noise, harmonic, inter-harmonic, and flicker components.

The present study propose an innovative turn-boring operation method and focuses on finding optimal turn-boring process parameters for AA7050-T7451 by considering multiple performance characteristics using Taguchi orthogonal array with the grey relational analysis, the effect of cutting variables such as, feed rate, depth of cut and cutting speed are optimized with considerations of multiple performance characteristics namely surface roughness, roundness error, material removal rate and power consumption the optimal values were found out from the Grey relational grade. The result of the Analysis of Variances (ANOVA) is proved that the most significant factor is cutting speed, followed by feed rate, radial depth of cut. Finally, confirmation tests were performed to make a comparison between the experimental results. Experimental results have shown that machining performance in precision turn-boring process can be improved effectively through this approach

Due to the demands of personal travels and entertainments, light airplanes and small business aircrafts are developing rapidly. Light airplane structure is simple; however, it lacks crashworthiness design, especially the considerations on the impact of energy absorption. Therefore, in an event of accident, significant damage to passengers will be usually incurred. Airplanes made of composite materials structurally have high specific strength and good aerodynamic configuration. These materials have become the primary choice for new airplane development. This study mainly explores the topology optimization analysis of the light aircraft’s cockpit made of carbon fiber reinforced composites. This paper compares the compression amounts in the original models of composite material and aluminum alloy fuselages with the models after optimization during the crash-landing, in order to investigate the safety of fuselages made of different materials after structural optimization under the dynamic crashing. This study found that the energy absorbed by the aluminum alloy fuselage during crash-landing is still higher than that by the carbon fiber reinforced composites fuselage. On the other hand, the aluminum alloy fuselage after topology optimization could have an energy absorption capability enhanced by 40%, as compared to the that of the original model of aluminum alloy fuselage.

Thermal infrared imagery provides temperature information on target objects, and has been widely applied in non-destructive testing. However, thermal infrared imagery is not always able to display detailed textures of inspected objects, which hampers the understanding of geometric entities consisting of temperature information. Although some commercial software has been developed for 3D thermal model displays, the software requires the use of expensive specific thermal infrared sensors. This study proposes a cost-effective method for 3D thermal model reconstruction based on image-based modeling. Two smart phones and a low-cost thermal infrared camera are employed to acquire visible images and thermal images, respectively, that are fused for 3D thermal model reconstruction. The experiment results demonstrate that the proposed method is able to effectively reconstruct a 3D thermal model which extremely approximates its corresponding entity. The total computation time for the 3D thermal model reconstruction is intensive while generating dense points required for the creation of a geometric entity. Future work will improve the efficiency of the proposed method in order to expand its potential applications to in-time monitoring.

We study in this paper the time evolution of stock markets using a statistical physics approach. We consider an ensemble of agents who sell or buy a good according to several factors acting on them: the majority of the neighbors, the market ambiance, the variation of the price and some specific measure applied at a given time. Each agent is represented by a spin having a number of discrete states q or continuous states, describing the tendency of the agent for buying or selling. The market ambiance is represented by a parameter T which plays the role of the temperature in physics: low T corresponds to a calm market, high T to a turbulent one. We show that there is a critical value of T, say T_c, where strong fluctuations between individual states lead to a disordered situation in which there is no majority: the numbers of sellers and buyers are equal, namely the market clearing. The specific measure, by the government or by economic organisms, is parameterized by $H$ applied on the market at the time t₁ and removed at the time t₂. We have used Monte Carlo simulations to study the time evolution of the price as functions of those parameters. In particular we show that the price strongly fluctuates near T_c and there exists a critical value H_c above which the boosting effect remains after H is removed. Our model replicates the stylized facts in finance (time-independent price variation), volatility clustering (time-dependent dynamics) and persistent effect of a temporary shock. The second party of the paper deals with the price variation using a time-dependent mean-field theory. By supposing that the sellers and the buyers belong to two distinct communities with their characteristics different in both intra-group and inter-group interactions, we find the price oscillation with time. Results are shown and discussed.

Background: The aim of this study was to investigate the risk of obstructive sleep apnea (OSA) among ankylosing spondylitis (AS) patients in a nationwide population. Methods: We conducted a nationwide cohort study between 2003 and 2013 using the Taiwan National Health Insurance Research Database. The AS cohort included 2210 patients who were newly diagnosed between 2003 and 2013. Randomly selected non-AS controls were matched at a 1:4 ratio based on age, sex and index date. The endpoint of OSA was occurrence or the end of 2013. Cumulative incidences, hazard ratios (HRs) and 95% confidence intervals (CIs) were calculated after adjusting for age, gender, comorbidities and co-medications. Multivariate analyses were performed using Cox proportional hazards model. Due to violation of the proportionality assumption, landmark analysis was conducted to explore the risk of OSA during specific follow-up periods. Results: The adjusted HR (aHR) of OSA for the AS group was 2.826 (95% C.I. = 1.727–4.625) compared to the control group. On landmark analysis, aHR was 7.919 (95% C.I. = 3.169–19.792) for AS group 0–24 months from index date, and decreased to 1.816 (95% C.I. = 0.944–3.494) at ≥ 24 months from index date. On subgroup analyses increased risks of OSA in AS group compared to the control group were found for both males and females (aHRs were 4.533 (95% C.I. = 1.441–14.262) and 2.672 (95% C.I. = 1.522–4.692) for females and males, respectively). On age stratified analysis, there was significant risk only for the 40–59 age group with aHR of 3.913 (95% C.I. = 1.890–8.102). Conclusions: A higher risk of developing OSA was found among newly diagnosed AS cohort during the 12-year follow-up period, especially within 2 years after AS index date and in the 40–59 age group.

In manual maintenance inspections of large-scaled photovoltaic (PV) or rooftop PV systems, several days are required to survey the entire PV field. To improve reliability and shorten the amount of time involved, this study proposes an electrical examination based method for locating multiple faults in the PV array. The maximum power point tracking (MPPT) algorithm is used to estimate the maximum power of each PV panel; this is then compared with metering the output power of PV array. Power degradation indexes are parameterized to quantify the degradation between maximum power and metered output power. Bidirectional hetero-associative memory (BHAM) networks are then used to locate multiple faults within the entire PV field. For a rooftop PV system with two strings, as seen in Figure 1, experimental results demonstrate that the proposed model has computational efficiency for real-time applications and that its algorithm is easily implemented in a mobile intelligent vehicle.

There has been a growing awareness of the need to implement environmentally friendly operations in the hotel industry, but most studies focus on guest behaviors. Only a few studies investigate employees’ willingness to comply with hotels’ green practices. This study seeks to further the investigation from the human resource perspective. Using alumni from a tourism and hospitality programs, this study collected 233 responses. The study hypothesizes that the employees’ green ability consisting of environmental awareness, environmental knowledge, and environmental skill creates a positive impact on hotels’ green ability. The results indicate that employees contribute approximately a fifth of hotels’ ability to implement greener practices.

An autonomous concrete crack inspection system is necessary for preventing hazardous incidents arising from deteriorated concrete surfaces. In this paper, we represent a concrete crack detection framework to aid the process of automated inspection. The proposed approach employs a deep convolutional neural network architecture for crack segmentation from concrete image. The proposed network alleviates the effect of gradient vanishing problem present in deep neural network architectures. A feature silencing module is incorporated in the crack detection framework, for eliminating unnecessary feature maps from the network. The overall performance of the network significantly improves as a result. Experimental results support the benefit of incorporating feature silencing within a convolutional neural network architecture for improving the network’s robustness, sensitivity, and specificity. An added benefit of the proposed architecture is its ability to accommodate for the trade-off between specificity (positive class detection accuracy) and sensitivity (negative class detection accuracy) with respect to the target application. Furthermore, the proposed framework achieves a high precision rate and processing time than crack detection architectures present in literature.

This research presents a comprehensive computational analysis of the two-phase flow dynamics within a three-dimensional porous transport layer (PTL) in a proton exchange membrane (PEM) electrolyzer. Employing advanced computational fluid dynamics (CFD) and a volume of fluid (VOF) approach, the study utilizes the finite-volume method to model a time-dependent, isothermal process within a laminar flow regime. Notably, the study treats oxygen as the dispersed phase and water as the continuous phase within the system. Investigations on the anode side uncovered the formation of gas bubbles on the electrode's surface subsequent to the electrochemical reaction. The simulation, spanning 5 seconds with 0.25-second intervals, highlights the critical role of the time interval between the initiation and 2 seconds in achieving pressure and velocity equilibrium within the PTL. The initial 0.75 seconds witnessed a peak in oxygen concentration, followed by its movement across the PTL, exhibiting a transition from regions of lower to higher concentration, consistent with known physical behaviour. Remarkably, the model recorded the highest pressure of 3.5 Pa at 0.25 s. Furthermore, the study observed an incremental pressure drop from 0.25 s to 0.5 s and 1 s, approximately amounting to 28.5% and 20%, respectively, ultimately leading to a uniform pressure distribution within the model. Over time, the pressure drop intensified across the entire model due to the evolving nature of the oxygen gas. These findings provide valuable insights into the complex dynamics of two-phase flow processes within PEM electrolyzers, contributing to the advancement of sustainable energy technologies.

Noise reduction in medical images is a perplexing undertaking for the researchers in digital image processing. Noise generates maximum critical disturbances as well as touches the medical images quality, ultrasound images in the field of biomedical imaging. The image is normally considered as gathering of data and existence of noises degradation the image quality. It ought to be vital to reestablish the original image noises for accomplishing maximum data from images. Medical images are debased through noise through its transmission and procurement. Image with noise reduce the image contrast and resolution, thereby decreasing the diagnostic values of the medical image. This paper mainly focuses on Gaussian noise, Pepper noise, Uniform noise, Salt and Speckle noise. Different filtering techniques can be adapted for noise declining to improve the visual quality as well as reorganization of images. Here four types of noises have been undertaken and applied on medical images. Besides numerous filtering methods like Gaussian, median, mean and Weiner applied for noise reduction as well as estimate the performance of filter through the parameters like mean square error (MSE), peak signal to noise ratio (PSNR), Average difference value (AD) and Maximum difference value (MD) to diminish the noises without corrupting the medical image data.

This research develops the Osteoporosis Knowledge, Attitude, and Behaviors Questionnaire (OKABQ) with the intent to evaluate levels of osteoporosis knowledge, attitude and behavior change. The aims of the study were to develop and validate the OKABQ; and to establish a mediation model of the research. A quantitative, descriptive, and instrumental study was conducted in two phases: Phase I—development of the scale through Delphi Method by osteoporosis experts; Phase II—evaluation of the validity and reliability of the scale and construction of a mediation model using SmartPLS. In Phase I, the content validity index (CVI) of the questionnaire was higher than 0.96 and the inter-rater reliability (IRR) kappa was 1.00. In Phase II, exploratory factor analysis showed that two predominating factors of attitude as a mediation were addressed by the 26-item OKABQ. The indirect effect results from the estimated model indicates that attitude mediates the relationship between knowledge and behaviors (β = 0.114, t = 2.627, p < 0.001), which is positive and statistically significant. We concluded that the OKABQ is a valid measure of osteoporosis knowledge, attitude and behaviors for women with osteoporosis. These assessment results could assist healthcare providers in mitigating insufficiency on health education.

In this study, we aimed to develop a deep learning model for identifying bacterial keratitis (BK) and fungal keratitis (FK) by using slit-lamp images. We retrospectively collected slit-lamp images of patients with culture-proven microbial keratitis between January 1, 2010, and December 31, 2019, from two medical centers in Taiwan. We constructed a deep learning algorithm, consisting of a segmentation model for cropping cornea images and a classification model that applies convolutional neural networks to differentiate between FK and BK. The model performance was evaluated and presented as the area under the curve (AUC) of the receiver operating characteristic curves. A gradient-weighted class activation mapping technique was used to plot the heatmap of the model. By using 1330 images from 580 patients, the deep learning algorithm achieved an average diagnostic accuracy of 80.00%. The diagnostic accuracy for BK ranged from 79.59% to 95.91% and that for FK ranged from 26.31% to 63.15%. DenseNet169 showed the best model performance, with an AUC of 0.78 for both BK and FK. The heat maps revealed that the model was able to identify the corneal infiltrations. The model showed better diagnostic accuracy than the previously reported diagnostic performance of both general ophthalmologists and corneal specialists.

The present study examined differences in operant responses in adult male and female rats during distinct phases of addiction. Males and females demonstrated escalation in methamphetamine (0.05 mg/kg, i.v.) intake with females showing enhanced latency to escalate, and bingeing. Following protracted abstinence, females show reduced responses during extinction, and have greater latency to extinguish compared with males, indicating reduced craving. Females demonstrated lower context-driven reinstatement compared to males, indicating that females have less motivational significance to the context associated with methamphetamine. Whole-cell patch-clamp recordings on dentate gyrus (DG) granule cell neurons (GCNs) were performed in acute brain slices from controls and methamphetamine experienced male and female rats and neuronal excitability were evaluated from GCNs. Reinstatement of methamphetamine seeking reduced spiking in males, and increased spiking in females compared to controls, demonstrating distinct neuroadaptations in intrinsic excitability of GCNs in males and females. Reduced excitability of GCNs in males were associated with enhanced levels of neural progenitor cells, expression of plasticity-related proteins including CaMKII and choline acetyltransferase in the DG. Enhanced excitability in females were associated with increased GluN2A/2B ratio, indicating changes in postsynaptic GluN subunit composition in the DG. Altered intrinsic excitability of GCNs were associated with reduced mossy fiber terminals in the hilus and pyramidal projections, demonstrating compromised neuroplasticity in the DG in both sexes. The alterations in excitability, plasticity-related proteins and mossy fiber density were correlated with enhanced activation of microglial cells in the hilus, indicating neuroimmune responses in both sexes. Together, the present results indicate sexually dimorphic adaptive biochemical changes in excitatory neurotransmitter systems in the DG and highlight the importance of including sex as a biological variable in exploring neuroplasticity and neuroimmune changes that predict enhanced relapse to methamphetamine-seeking behaviors.

The fluctuations in both time and space of the fish larvae community in relation to hydrographic characteristics in the waters surrounding the Taiwan Bank were studied in October 2021 (autumn) and March 2022 (spring). Throughout the study period, we identified a total of 149 taxa of fish larvae, encompassing 96 genera and 71 families. Engraulis japonicus, Diaphus slender type, unidentified Gobiidae, Apogon sp., unidentified Clupeidae, and Benthosema pterotum were the six most dominant taxa, together constituted 47.39% of the total catch. No significant temporal difference in abundance of fish larvae was found, but the species number of fish larvae was more diverse in spring than in autumn. There was a notable difference in species composition between the cruises, and the cluster analysis unveiled a distinct temporal structure in the assemblage of fish larvae. The dynamics of prevailing currents induced by seasonal monsoons play an important role in the transport of fish larvae. The distribution of fish larvae was closely linked to hydrographic features, where seawater temperature and salinity emerged as the primary explanatory factors influencing the composition of fish larvae assemblages in the waters surrounding the Taiwan Bank. While the increased influx of nutrients from upwelling ensures abundant food availability, the hydrographic conditions may not be suitable for every fish larva.

This study presents an innovative approach for the utilization of industrial by-products and municipal waste in the production of sustainable and environmentally friendly cement mortar. We explored stabilized stainless-steel reduced slag (SSRS) and polyethylene (PE) plastic waste as partial replacements for aggregates. Various engineering properties of the resulting cement mortar specimens, including slump, slump flow, compressive strength, flexural strength, tensile strength, water absorption, and ultrasonic pulse velocity (UPV), were investigated through comprehensive experimental tests. The influence of different water-cement (w/c) ratios and substitution amounts on the engineering properties of the cement mortar samples was thoroughly examined. The findings revealed that an increase in PE substitution adversely affected the overall workability of the cement mortar mixtures, whereas an increase in SSRS amount contributed to enhanced workability. As for the hardened properties, a consistent trend was observed for both cases, with higher w/c ratios and substitution amounts leading to reduced mechanical properties. Water absorption and UPV test results validated the increased formation of porosity with higher w/c ratios and substitution amounts. This study proposes a promising method to effectively repurpose industrial by-products and municipal wastes, transforming them into sustainable construction and building materials. Additionally, a comparative analysis of transportation costs and carbon footprint emissions between SSRS-cement mortar and PE-cement mortar was conducted to assess their environmental impact and sustainability. Generally, higher w/c ratios and replacement levels corresponded to reduced carbon footprint. The geographical location of the source of SSRS and PE remains a challenge and studies to overcome this challenge must be further explored.

This paper reviews several techniques, including analytical theories and real frequency techniques, to design ultra-wideband impedance matching networks for low-power applications. The comparison of solutions obtained using the simplified real frequency technique to the published solution using Chebyshev filter theory is demonstrated.

This article belongs in the emerging area of research seeking ways to depolarize societies in the short run (around events such elections) as well as in a sustainable fashion. We approach the depolarization process with a model of three homophilic groups (US Democrats, Republicans and Independents interacting in the context of upcoming federal elections). We expand a previous polarization model, which assumed that each individual interacts with all other individuals in its group with mean-field interactions. We add a depolarization field which is analogous to the Blume-Capel model’s crystal field. There are currently numerous depolarization efforts around the world, some of which act in ways similar to this depolarization field. We find that for low values of the depolarization field, the system continues to be polarized. When the depolarization field increases, the polarization decreases.

Our study explores the role of cancer-derived extracellular exosomes (EXs), particularly focusing on collagen alpha-3 (VI; COL6A3), in facilitating tumor dissemination and metastasis in epithelial ovarian cancer (EOC). We found that COL6A3 is expressed in aggressive ES2 derivatives, SKOV3 overexpressing COL6A3 (SKOV3/COL6A3), and mesenchymal-type ovarian carcinoma stromal progenitor cells (MSC-OCSPCs), as well as their EXs, but not in less aggressive SKOV3 cells or ES2 cells with COL6A3 knockdown (ES2/shCOL6A3). High COL6A3 expression correlates with worse overall survival in EOC patients, as evidenced by TCGA and GEO data analysis. In vitro experiments showed that EXs from MSC-OCSPCs or SKOV3/COL6A3 cells significantly enhance invasion ability in ES2 or SKOV3/COL6A3 cells, respectively (both, P &lt;0.001). In contrast, ES2 cells with ES2/shCOL6A3 EXs exhibit reduced invasion ability (p&lt;0.001). In vivo, the average disseminated tumor numbers in the peritoneal cavity were significantly greater in mice receiving intraperitoneally injected SKOV3/COL6A3 cells than in SKOV3 cells (p&lt;0.001). Furthermore, mice intravenously (IV) injected with SKOV3/COL6A3 cells and SKOV3/COL6A3-EXs showed increased lung colonization compared to mice injected with SKOV3 cells and PBS (p=0.007) or SKOV3/COL6A3 cells and PBS (p=0.039). Knockdown of COL6A3 or treatment with EXs inhibitor GW4869 or rapamycin-abolished COL6A3-EXs may suppress the aggressiveness in EOC.

A methodology for selecting rational parameters of atmospheric aircrafts at the initial stages of design using an optimization algorithm of differential evolution and numerical mathematical modeling of aerodynamics problems is proposed. The technique involves the implementation of weight and aerodynamic balance in the main flight modes, has the ability to consider atmospheric aircrafts with one or two lifting surfaces, apply parallel calculations and automatically generate a three-dimensional geometric model of aircraft appearance based on the optimization results. A method for accelerating the process of optimizing the parameters of an aircraft in terms of take-off weight by more than three times by introducing a objective function into a set of design variables is proposed and demonstrated. The results of assessing the reliability of the used mathematical models of aerodynamics and the correctness of the calculation the objective function, taking into account various constraints, are presented. A comprehensive test of the performance and efficiency of the methodology is considered by solving demonstration problems to optimize more than ten main design parameters the appearance of two existing heavy-class unmanned aerial vehicles with known characteristics from open sources.

As precision medicine such as targeted therapy and immunotherapy often have limited accessibility, low response rate and evolved resistance, it is urgent to develop simple, low-cost, and quick-turnaround personalized diagnostic technologies for drug response prediction with high sensitivity, speed, and accuracy. Major challenges of drug response prediction strategies employing digital database modeling are the scarcity of labeled clinical data, applicable only to a few classes of drugs, and losing the resolution at the individual patient level. Although these challenges have been partially addressed by large-scale cancer cell line datasets and more patient-relevant cell-based systems, the integration of different data types and data translation from pre-clinical to clinical utilities are still far-fetched. To overcome current limitations of precision medicine with a clinically proven drug response prediction assay, we have developed an innovative and proprietary technology based on in vitro patient testing and in silico data analytics. First, a patient-derived gene expression signature was established via transcriptomic profiling of cell-free mRNA (cfmRNA) from the patient’s blood. Second, a gene-to-drug data fusion and overlaying mechanism to transfer data was performed. Finally, a semi-supervised method was used for database searching, matching, annotation and ranking of drug efficacies from a pool of ~700 approved, investigational or clinical trial drug candidates. A personalized drug response report can be delivered to inform clinical decision within a week. The PGA (Patient-derived Gene expression-informed Anticancer drug efficacy) test has significantly improved patient outcomes when compared to the treatment plans without PGA support. Implementation of PGA, which combines patient-unique cfmRNA fingerprints with drug mapping power, has the potential to identify treatment options when patients are no longer responding to therapy and when standard-of-care is exhausted.

LiFePO4 (LFP) has undergone extensive research and is a promising cathode material for Li-ion batteries. The high interest is due to its low raw material cost, good electrochemical stability, and high-capacity retention. However, poor electronic conductivity and a low Li+ diffusion rate decrease its electrochemical reactivity, especially at fast charge/discharge rates. In this work, the volumetric energy density of lithium-ion batteries is successfully increased by using different amounts of conductive carbon (Super P) in the active material content. The particle size and morphology of the electrode material samples are studied using field emission scanning electron microscopy and dynamic light scattering. Two-point-probe DC measurements and adhesive force tests are used to determine the conductivity and evaluate adhesion for the positive electrode. Cyclic voltammetry, electrochemical impedance spectroscopy (EIS), and charge/discharge tests are used to analyze the electrochemical properties of the battery. The samples containing 88% LFP, 5.5% Super P and 6.5% PVDF perform best, with discharge capacities reaching 169.8 mAhg-1 at 0.1C, and they can also manage charging/discharging of 5C. EIS indicates that this combination produces the lowest charge-transfer impedance (67 Ω) and the highest Li+ ion diffusion coefficient (5.76 x 10-14 cm2s-1).

The investigation aims to analyze the effect of homogenization heat treatment on the quantity, distribution, morphology, and chemical composition of δ ferrite and sigma phase in the 316L austenitic stainless steel cast billet. Microstructures of the cast billet at different locations, center, 0.5 R, R, and the subsequent 2/6-hour homogenization heat treatment at 1240 oC were examined. The microstructure at the radius R was much more uniform and expected a better performance in the following hot/cold forging processes due to the highest cooling rate compared with those at 0.5R and center. The δ ferrite often accompanies the generation of the sigma phase, and the transformation of δ ferrite into the sigma/(austenite) and retained δ ferrite is strongly related to the cooling rate after homogenization heat treatment. The sigma phase is hard and detrimental to the subsequent hot/cold forgings. It must be removed from the homogenization heat treatment before forging. Fast air cooling from 850 oC to room temperature after homogenization heat treatment cannot prohibit the sigma phase formation. Rapid cooling between 850 and 1240 oC after homogenization treatment is required to avoid the sigma phase formation in the 316L stainless steel cast billet.

Numerous cases and a shortage of resources usually limit wild animal rescue. New technology implemented might save these severely injured wild animals from the situation of euthanasia by easing the requirement of intensive medication. Three-dimensional (3D) technologies provide precise and accurate results that improve the quality of the medical application. These 3D tools have become relatively low-cost and accessible in the past years. In the medical field of exotic animal, turtle shell defect is highly challenging because of inevitable water immersion. This report is the first attempt to apply the combination of 3D scanning, computer-aid design (CAD), and 3D printing to make a protective device that frees the wound from exposure to water or infection sources. The presenting techniques successfully extricate a wild freshwater turtle from an extensive shell defect within a short period. Integration of multiple sciences to 3D technology can provide a facile model for veterinary medical applications.

Combined systems for power production and thermally activated cooling have a high potential for improving the efficiency and utilisation of thermal systems. In this regard, various configurations have been proposed and are comprehensively reviewed. They are primarily based on absorption systems and the implementation of multiple levels of complexity and flexibility. The configuration of the absorption power and cooling combined cycle proposed herein has wide commercial applicability owing to its simplicity. The configuration of the components is not new. However, the utilisation of aqueous salt solutions, the comparison with ammonia chiller and with absorption power cycles, the focus on parameters that are important for real-life applications, and the comparison of the performances for constant heat input and waste heat recovery are novel. The proposed cycle is also compared with a system based on the organic Rankine cycle and vapour compression cycle. An investigation of its performance proves that the system is suitable for a given range of boundary conditions from a thermodynamic standpoint, as well as in terms of system complexity and technical feasibility. New possibilities with regard to added power production have the potential to improve the economics and promote the use of absorption chiller systems.

The outbreak of novel coronavirus (COVID-19) infections in 2019 is in dire need of finding potential therapeutic agents. In this study, we used molecular docking to repurpose HIV protease inhibitors and nucleoside analogues for COVID-19, with evaluations based on docking scores calculated by AutoDock Vina and RosettaCommons. Our results suggest that Indinavir and Remdesivir possess the best docking scores, and comparison of the docking sites of the two drugs reveal a near perfect dock in the overlapping region of the protein pockets. After further investigation of the functional regions inferred from the proteins of SARS coronavirus, we discovered that Indinavir does not dock on any active sites of the protease, which may give rise to concern in regards to the efficacy of Indinavir. On the other hand, the docking site of Remdesivir is not compatible with any known functional regions, including template binding motifs, polymerization motifs and nucleoside triphosphate (NTP) binding motifs. However, when we tested the active form (CHEMBL2016761) of Remdesivir, the docking site revealed a perfect dock in the overlapping region of the NTP binding motif. This result suggests that Remdesivir could be a potential therapeutic agent. Clinical trials still must be done in order to confirm the curative effect of these drugs.

Local binary pattern is one of the visual descriptors and can be used as a powerful feature extractor for texture classification. In this paper, a novel representation for face recognition is proposed, called it Bilateral Line Local Binary Patterns (BL-LBP). This scheme is an extension of Line Local Binary Patterns descriptors in the statistical learning subspace. The present bilateral descriptors are fused with an ensemble learning of calibrated SVM models. The performance of this scheme is evaluated using 5 standard face databases. It is found that it is robust against illumination variation, diverse facial expressions and head pose variations and its recognition accuracy reaches 98 percent, running on a mobile device with a processing speed of 63 ms per face. Results suggest that our proposed method can be very useful for the vision systems that have limited resources where the computational cost is critical.

The anti-inflammatory effect of ginsenoside Rh2 (GRh2) is one of the most important ginsenosides. The purpose of this study is to identify the anti-inflammatory and antioxidant effects of GRh2 after LPS challenge lung injury animal model. GRh2 reduced LPS-induced NO, TNF-α, IL-1, IL-4, IL-6 and IL-10 productions in lung tissues. GRh2 treatment decreased the histological alterations in the lung tissues and BALF protein content and total cells number also diminished in LPS-induced lung injury mice. Moreover, GRh2 blocked iNOS, COX-2, the phosphorylation of IκB-α, ERK, JNK, p38, Raf-1 and MEK protein expression which is corresponded to the growth of HO-1, Nrf-2, catalase, SOD and GPx expressions in LPS-induce lung injury. An experimental study has suggested that GRh2 has provided with anti-inflammatory effects in vivo, and its potential therapeutic efficacy in major anterior segment lung diseases.

Melon pest management relies on the excessive application of pesticides. Reducing pesticide spraying has become a global issue for environmental sustainability and human health. Therefore, developing a new cropping system that is sustainable and eco-friendly is important. This study found that melon seedlings irrigated with ultrafine water containing H2 and O2 (UFW) produced more root hairs, increased shoot height, and produced more flowers than the control irrigated with reverse osmosis (RO) water. Surprisingly, we also discovered that UFW irrigation significantly reduced aphid infestation in melon. Based on cryo-scanning electron microscope (cryo-SEM) observations, UFW treatment enhanced trichome development and prevented aphid infestation. To investigate whether it was H2 or O2 that helped to deter insect infestation, we prepared UF water enrichment of H2 (UF+H2) and O2 (UF+O2) separately and irrigated melons. Cryo-SEM results indicated that both UF+H2 and UF+O2 can increase the density of trichomes in melon leaves and petioles. RT-qPCR showed that UF+H2 significantly increased the gene expression level of the trichome-related gene GLABRA2 (GL2). We planted melons in a plastic greenhouse and irrigated them with ultrafine water enrichment of hydrogen (UF+H2) and oxygen (UF+O2). The SPAD value, photosynthetic parameters, root weight, fruit weight, and fruit sweetness were all better than the control without ultrafine water irrigation. UFW significantly increased trichome development, enhanced insect resistance, and improved fruit traits. This system thus provides useful water management for pest control and sustainable agricultural production.

Stroke remains a major cause of death and disability in the United States and around the world. Solid safety and efficacy profiles of novel stroke therapeutics have been generated in the laboratory, but most failed in clinical trials. Investigations into the pathology and treatment of the disease remain a key research endeavor in advancing scientific understanding and clinical applications. In particular, cell-based regenerative medicine, specifically stem cells transplantation, may hold promise as stroke therapy because grafted cells and their components may recapitulate the growth and function of the neurovascular unit, which arguably represents the alpha and omega of stroke brain pathology and recovery. Recent evidence has implicated mitochondria, organelles with a central role in energy metabolism and stress response, in stroke progression. Recognizing that stem cells offer a source of healthy mitochondria, potentially transferrable into ischemic cells, may provide a new therapeutic tool. To this end, deciphering cellular and molecular processes underlying dysfunctional mitochondria may reveal innovative strategies for stroke therapy. Here, we review recent studies capturing the intimate participation of mitochondrial impairment in stroke pathology, and showcase promising methods of healthy mitochondria transfer into ischemic cells, to critically evaluate the potential of mitochondria-based stem cell therapy for stroke.

Temperature differences between the atmosphere and river water allow rivers to be used as a hydrothermal energy source. The river-water heat pump system is a relatively non-invasive renewable energy source; however, effluent discharged from the heat pump can cause downstream temperature changes which may impact sensitive fluvial ecosystems. In this study, the water temperature recovery distance of the effluent was estimated for a river section in the Han River Basin, Korea, using the heat transfer equation and the Environmental Fluid Dynamic Code (EFDC) model. Results showed that, compared to the EFDC model, the heat transfer equation tended to overestimate the water temperature recovery distance due to its simplified assumptions. The water temperature recovery distance could also be used as an objective indicator to decide the reuse of downstream river water. Furthermore, as the river system was found to support an endangered fish species that is sensitive to water environment changes, care should be taken to exclude the habitats of protected species affected by water temperatures within water temperature recovery distance.

Limited knowledge is available about the association between autistic spectrum disorder (ASD) and precocious puberty. Our study examined the association between the two medical conditions, and the effect modification by sex and neuropsychiatric comorbidities in a nationwide population. To compare the risk of precocious puberty between ASD and non-ASD cases, we conducted Cox regression analysis, using ASD as exposure and time-to-precocious puberty as outcome. We adjusted for sex, attention-deficit/hyperactivity disorder (ADHD), tics disorder, obsessive–compulsive disorder (OCD), anxiety disorder, intellectual disability, and epilepsy. We performed a moderation analysis to examine the potential moderating effects by sex or comorbidities. Patients with ASD were prone to have precocious puberty, with an adjusted hazard ratio (aHR) of 1.80 (95% CI: 1.61-2.01). For the effect modification, sex, specifically females, moderated the association between ASD and precocious puberty, with relative excess risk due to interaction (RERI) 7.35 (95% CI 4.90-9.80). No significant effect modification was found for any of the comorbidities within the scope of additive effect modification. We found that patients with ASD were prone to precocious puberty, regardless of sex or comorbid neuropsychiatric disorders. Girls with ASD are at particularly higher risk to develop precocious puberty.

Background: Few studies have investigated the longitudinal association between cervical spondylosis (CS) and migraine by using a nationwide population-based database. Methods: We conducted a retrospective cohort study from 2000 to 2011 identifying 27,930 cases of cervical spondylosis and 111,720 control subjects (those without cervical spondylosis) from a single database. The subjects were frequency-matched on the basis of sex, age, and diagnosis date. The non- cervical spondylosis cohort was four times the size of the cervical spondylosis cohort. To quantify the effects of cervical spondylosis on the risk of migraine, univariate and multivariate Cox proportional hazard regression analyses were used to calculate the hazard ratio (HR) and 95% confidence interval (CI). Results: After a 10-year follow-up controlling for potential confounding factors, overall migraine incidence was higher in the cervical spondylosis cohort than in the non- cervical spondylosis cohort (5.16 and 2.09 per 1,000 people per year, respectively; crude hazard ratio = 2.48, 95% confidence interval = 2.28–2.69) with an adjusted hazard ratio of 2.03 (95% confidence interval = 1.86–2.22) after accounting for sex, age, comorbidities, and medication. Individuals with myelopathy in the cervical spondylosis cohort had a 2.19 times (95% confidence interval = 1.80–2.66) higher incidence of migraine compared than did those in the non- cervical spondylosis cohort. Conclusion: Individuals with cervical spondylosis exhibited a higher risk of migraine than those without cervical spondylosis. The migraine incidence rate was even higher among individuals with cervical spondylotic myelopathy.

Programmed cell death protein 1 (PD-1) is a biomarker on the surface of cells that has a role in promoting self-tolerance by suppressing the inflammatory activity of T cells. In this work, one peptide of PD-1 was used as the template in molecular imprinting. The magnetic peptide-imprinted poly(ethylene-co-vinyl alcohol) composite nanoparticles (MPIP NPs) were characterized by dynamic light scattering (DLS), high-performance liquid chromatography (HPLC), Brunauer-Emmett-Teller (BET) analysis and superconducting quantum interference device (SQUID) analysis. Natural killer-92 (NK-92) cells were added to these composite nanoparticles and then incubated with human hepatoma (HepG2) cells. The viability and apoptosis pathway of HepG2 were then studied using cell counting kit-8 (CCK8) and the quantitative real-time polymerase chain reaction (qRT-PCR), respectively. These nanoparticles were found significantly enhance the activity of natural killer cells toward HepG2 cells by increasing expression of NK-kB, caspase 8 and especially caspase 3.

Multi-chiplet technique is expected to be a promising solution to achieve high-density system integration with low power consumption and high usage ratio. This technique can be integrated with glass interposer to accomplish a competitive low fabrication cost compared with the silicon-based interposer architecture. In this study, process-oriented stress simulation is performed by the element activation and de activation technique in finite element analysis architecture. Submodeling technique is also utilized to mainly conquer the scale mismatch and difficulty in mesh gridding design. It is used as well to analyze the thermomechanical responses of glass interposer with chiplet arrangement and capped epoxy molding compound (EMC) during curing. A three-factor, three-level full factorial design is applied using the analysis of variance method to explore the significance of various structural design parameters on stress generation. Analytic results reveal that the maximum first principal stresses of 130.75 and 17.18 MPa are introduced on the sidewall of Cu-filled via and the bottom of glass interposer, respectively. Moreover, the EMC thickness and through glass via pitch are the dominant factors in the adopted vehicle. They significantly influence the stress magnitude during heating and cooling.

This study aimed to investigate the relationship between sleep duration, dementia severity, age, and ANS regulation. This cross-sectional pilot study included 27 older patients with probable Alzheimer’s disease, hospitalized at a psychiatric center. We measured heart rate variability to assess ANS regulation at night, evaluated dementia severity using the Clinical Dementia Rating scale, and obtained sleep duration data from sleep diaries maintained by psychiatric nurses. The data were analyzed using repeated-measures generalized linear models with age, sex, dementia severity, and medication (antipsychotics) as covariates. A sleep duration of 7–8 h per night was associated with better ANS regulation than other sleep durations, as indicated by sympathovagal balance (p = 0.005). ANS dysregulation was characterized by a 20.7% increase in sympathetic nervous system activity and a 14.8% decrease in parasympathetic nervous system (PSNS) activity. We found a significant correlation between dementia severity and PSNS activity (p = 0.04) and observed an inverted U-shaped association between sleep duration and ANS regulation. This pilot study demonstrated that a sleep duration of 7–8 h per night may be critical in maintaining optimal ANS regulation. Bidirectional associations between sleep duration, inadequate sleep duration, aging, and ANS regulation warrant further investigation.

Background: The study aimed to explore the association between the prognostic nutrition index (PNI) and in-hospital complication and mortality in patients with spontaneous intracerebral hemorrhage (ICH). Methods: We conducted a retrospective analysis using data from the Changhua Christian Hospital Clinical Research Database (CCHRD) between January 2015 and December 2022. 2402 patients were included, with the median PNI value set at 42.77. The restricted cubic spline model, Kaplan-Meier and ROC analysis for overall survival were used to evaluate the association of PNI with medical complications and mortality. Propensity score matching (PSM) analysis was performed to balance these clinical variables between groups, which could reduce potential bias to some extent. Results: PNI was significantly associated with in-hospital complications and 28-day and 90-day mortality in multivariate analysis. The main finding of our study is that a low PNI score at admission was independently associated with a poor ICH outcome. The Kaplan-Meier curves revealed higher survival rates in the high PNI group. PNI demonstrated sensitivity to predict medical complications and mortality based on ROC analysis. Conclusions Our study suggests that PNI could serve as a valuable marker for predicting medical complications and mortality in patients with spontaneous ICH.

Although oncolytic viruses are currently being evaluated for cancer treatment in clinical trials, systemic administration is hindered by many factors that prevent them from reaching the tumor cells. When administered systemically, mesenchymal stem cells (MSCs) target tumors, and therefore constitute good cell carriers for oncolytic viruses. Methods: MSCs were primed with trichostatin A under hypoxia, which upregulated the expression of CXCR4, a chemokine receptor involved in tumor tropism, and coxsackievirus and adenovirus receptor that plays an important role in adenoviral infection. After priming, MSCs were loaded with conditionally replicative adenovirus that exhibits limited proliferation in cells with a functional p53 pathway and encodes Escherichia coli nitroreductase (NTR) enzymes (CRAdNTR) for targeting tumor cells. Results: Primed MSCs increased tumor tropism and susceptibility to adenoviral infection, and successfully protected CRAdNTR from neutralization by anti-Adenovirus antibodies both in vitro and in vivo, and specifically targeted p53-deficient colorectal tumors when infused intravenously. Analyses of deproteinized tissues by UPLC-MS/QTOF revealed that these MSCs converted the co-administered prodrug CB1954 into cytotoxic metabolites, such as 4-hydroxylamine and 2-amine, inducing oncolysis and tumor growth inhibition without being toxic for the host vital organs. Conclusion: This study shows that the combination of oncolytic viruses delivered by MSCs with the activation of prodrugs is a new cancer treatment strategy that provides a new approach for the development of oncolytic viral therapy for various cancers.

A Shape Memory Alloy (SMA) enabled Overtopping Wave Energy Converter (OWEC) that maximizes its overtopping discharge, and thus energy output under different wave conditions is presented. Among all the parameters affecting the overtopping discharge rate, the crest freeboard height is the most influential one to control the overtopping discharge rate and the stored overtopping volume behind it. Currently, all the OWEC crest freeboard heights are fixed by design to maximize the discharge rate on one particular sea state. In the present study, we show that the SMA can adjust the crest freeboard height through a control system based on the sea state and achieve an optimal overtopping discharge rate. A scaled OWEC model is built in the lab with its crest freeboard height controlled by springs made of SMA. The length (and thus tension) of the springs is controlled by temperature changes by changing the passing current through the springs. By adjusting the length of the springs based on the incoming wave condition, we adjust the freeboard to an optimal height known to generate a maximum overtopping discharge rate for energy conversion. This smart material-enabled design can maximize the overtopping discharge and thus the output power of the OWEC under various wave conditions. Furthermore, the simplicity of using SMA springs as the actuator leads to the minimum number of moving mechanical parts, which can remarkably decrease maintenance costs. As the proof of concept, two types of tests are conducted in the laboratory using the same OWEC model under several random wave trains generated from spectra with different significant wave heights - one type with a fixed crest freeboard height and the other type featuring the adjustable crest freeboard height controlled by the springs. The substantial increase of harvested output power in the OWEC with the adjustable crest freeboard height may pave the way for more efficient wave energy conversion systems.

Large structures such as wind turbines are subject to environmental factors and varying operational loads which may result in structural damage, making components of these large structures prone to performance and mechanical degradation. The use of high-definition optical vision sensors in digital image correlation (DIC) allow for the application of a non-destructive image registration technique in which it measures finite three-dimensional deformations on surfaces through correlations of a unique pattern or set of unique localized patterns. However, the physical placement of an artificial marker such as a unique speckled pattern on the surface of the structure is time-consuming and often impractical for large structures. Therefore, we propose a novel auto-mated methodology that searches and segments salient and unique regions of an image as well as for all subsequent images to assist in performing efficient displacement measurements for vibrational study and structural health monitoring purposes. Our algorithm is validated on a con-trolled set of images, as well as on a small structure and large real-world wind turbine, which suggests the algorithm’s efficacy without the use of artificial markers for large structural health monitoring.

Immune escape is observed with SARS-CoV-2 Omicron (Pango lineage B.1.1.529), the predominant circulating strain worldwide. Booster dose was shown to restore immunity against Omicron infection, however, real world data comparing mRNA (BNT162b2; Comirnaty) and inactivated vaccine (CoronaVac; Sinovac) homologous and heterologous boosting is lacking. A retrospective study was performed to compare the rate and outcome of COVID-19 in healthcare workers (HCWs) with various vaccination regime during a territory-wide Omicron outbreak in Hong Kong. During the study period 1 Feb – 31 Mar 2022, 3167 HCWs were recruited, 871 HCWs reported 746 and 183 episodes of significant household and non-household close contact. 737 HCWs acquired COVID-19 which were all clinically mild. Time dependent Cox regression showed that, comparing with 2-dose vaccination, 3-dose vaccination reduced infection risk by 31.7% and 89.3% in household contact and non-household close contact respectively. Using 2-dose BNT162b2 as reference, 2-dose CoronaVac recipient had significantly higher risk of being infected (HR 1.69 P<0.0001). Three-dose BNT162b2 (HR 0.4778 P<0.0001) and 2-dose CoronaVac + BNT162b2 booster (HR 0.4862 P=0.0157) were associated with lower risk of infection. Three-dose CoronaVac and 2-dose BNT162b2 + CoronaVac booster were not significantly different from 2-dose BNT162b2. The mean time to achieve negative RT-PCR or E gene cycle threshold 31 or above was not affected by age, number of vaccine dose taken, vaccine type and timing of the last dose. In summary, we have demonstrated lower risk of breakthrough SARS-CoV-2 infection in HCWs given BNT162b2 as booster after 2 doses of BNT162b2 or CoronaVac.

Global agriculture has been forced to increase food production to feed the growing human population, while confronting various environmental obstacles such as global warming, resistance to pathogens, and constraints on arable land caused by soil salinity, drought, rising sea level, saltwater intrusion, and urbanization. Regarding abiotic stresses, salinity is a worldwide problem for agricultural production. Many efforts, therefore, have been made to cope with the environmental challenges, however, the progress of salinization, which is mainly caused and accelerated by anthropogenic activities, is likely faster than our progress in finding ways to deal with this problem. In addition, drought represents a global threat to the production of major crops. In addition, pests and pathogens cause significant crop losses and diminish global food security. Among the various strategies that have been investigated and applied in plant science, antimicrobial peptides derived from plants have caught widespread attention from scientists since these peptides exhibit beneficial biological activities. In agricultural science, there have been reports on the roles of antimicrobial peptides with active properties against biotic and abiotic stresses. Non-specific plant lipid transfer proteins, thionins, systemins, defensins, cyclotides, and heveins-like antimicrobial peptides are common antimicrobial peptides that have been found to be involved in the defense system against fungi and insect pests. Based on their potential ability to protect crops from pests, bacteria, and pathogenic fungi, the use of antimicrobial peptide genes in creating transgenic plants has been largely conducted during the last decades, and these studies have obtained positive results against the growth of fungi and bacteria. This review will focus on the latest progress in studies of antimicrobial peptides related to biotic and abiotic stress tolerance in plants. We will also update the current progress in the development of antimicrobial peptide-based transgenic crops.

Most of the current methods for stabilizing electric arc furnace (EAF) slag are time-consuming and cannot be completely stabilized. In view of this, this study aimed to apply microbial‑induced calcium carbonate precipitation (MICP) technology in the stabilization of EAF reducing slag, and this was to be achieved by using the reaction between carbonate ions and free calcium oxide (f-CaO) in reducing slag to form a more stable calcium carbonate to achieve the purpose of stabilization. The test results showed that, when the EAF reducing slag aggregates (ERSAs) were immersed in Bacillus pasteurii bacteria solution or water, the f-CaO contained in it would react such that stabilization was achieved. The titration test results showed that the f-CaO content of the ERSAs immersed in the bacterial solution and water decreased. The expansion test results of the ERSAs that were subjected to hydration showed that the seven-day expansion of ERSAs after biomineralization could meet the Taiwan regulation requirement of a less than 0.5% expansion rate. The thermogravimetric analysis showed that both the experimental group and the control group might contain calcium carbonate compounds. The results of the X-ray diffraction analysis showed that the CaCO3 content in the ERSAs that were immersed in the bacterial solution was significantly higher than those that were immersed in water. Moreover, the compressive strength test results of concrete prepared with ERSAs showed that the compressive strength of the control group concrete began to decline after 28 days. In contrast, the experimental group concrete had a good stabilization effect, and there was no decline in compressive strength until the age of 180 days. At the age of 240 days, the surface cracks of the experimental group were particularly small, while the surface of the control group showed obvious cracks. These results confirmed that a mineralization reaction with B. pasteurii bacteria could be used as a stabilization technology for ERSAs.

Background: During pregnancy, major physiological changes occur in every system. Understanding the hemodynamic changes in different stages of pregnancy can help to identify abnormal states during pregnancy. Harmonic analysis could be a useful tool in monitoring the state of the ventricular-arterial system during pregnancy. The aim of this study was to investigate the specific statistical relationships between changes in harmonic indices during different stages of pregnancy. Methods: A Total of 380 women (190 pregnant women and 190 age-matched non-pregnant women), with ages ranging from 20 to 45, were enrolled in the study. The visit measured the subject’s hemodynamic parameters including heart rate, systolic blood pressure (SBP), diastolic blood pressure (DBP) and photoplethysmography (PPG). SBP and DBP were evaluated by an automatic blood pressure monitor. PPG signal were continuously recorded for 12-seconds using a PPG sensor. Spectrum analysis of the PPG signal was performed to evaluate the first five harmonic components (C1 – C5) and harmonic phases (P1 – P5). Result: A comparison between pregnant women and non-pregnant women showed that the non-pregnant women had lower DBP, C3, C5 and P5 (p<0.05). Waist Circumference, Heart rate, C2, C4 and P2 were higher in pregnant women. Logistic regression analysis was used to determine the associations between pregnancy and harmonics indices. C2, C4 and P3 were positively and P1 and P4 were negatively associated with pregnancy after controlling age, BMI, waist circumference, heart rate, SBP and DBP. Conclusion: The results of this study provide information on the changes in the harmonic frequency components during various stages of pregnancy. The harmonic components of the PPG signal have independent predictive value for changes in a woman's physiology during pregnancy. Since non-invasive PPG measurements can be performed frequently and easily, in the future, it is possible that the hemodynamic changes from some pregnancy-related disorders could be studied by harmonic analysis.

Deep learning has been introduced to single-image super-resolution (SISR) in the last decade. These techniques have taken over the benchmarks of SISR tasks. Nevertheless, most architectural designs necessitate substantial computational resources, leading to a prolonged inference time on embedded systems or rendering them infeasible for deployment. This paper presents a comprehensive survey of plausible solutions and optimization methods to address this problem. Then, we propose a pipeline that aggregates the latter in order to enhance the inference time without significantly compromising the perceptual quality. We investigate the effectiveness of the proposed method on a lightweight GAN-based perceptual-oriented model as a case study. The experimental results show that our proposed method leads to significant improvement in the inference time on both Desktop and Jetson Xavier NX, especially for higher resolution input sizes on the latter, thereby making it deployable in practice.

This study employed a TSMC 0.18-µm 50 V process to establish a high-voltage n-LDMOS structure. In the reference device, the number of floating-poly (poly-2) turns was 7, and the width and spacing of each turn was 1 µm. Although increasing the number of turns reduces the peak field, directly reducing or increasing the number of poly-2 turns is a common practice. The present experiment was realized in three steps, namely fixing the number of occupied area adjustment turns, adjusting the width of each turn, and adjusting the distance between turns. The first step was fixing the number of occupied area adjustment turns. The number of turns was increased from 7 to 9, and the number of turns was reduced to 5 and 3 in the reference group. A reduction in the number of turns led to a greater decrease in the peak field and increase in the breakdown voltage despite the area remaining unchanged. A comparison of the use of three turns with that of seven turns revealed that the maximum electric field decreased by 42%, from 4.17e+3 to 2.46e+3 V/cm, and that the breakdown voltage (VBK) increased from 30.2 to 35.84 V. The second step was adjusting the width of each turn from 1 to 1.4, 1.2, 0.8, and 0.6 µm in the reference group. This increase in width reduced the maximum electric field and led to a greater increase in VBK. When the width was increased to 1.4 µm, the maximum electric field decreased by 29% from 1.95e+3 to 1.4e+3 V/cm, and the VBK increased by 183% from 30.2 to 85.6 V. The third step was adjusting the spacing of each turn from 1 to 1.4, 1.2, 0.8, and 0.6 µm in the reference group. The results revealed that a reduction in the spacing led to a greater reduction in the maximum electric field and an in-crease in the VBK. When the pitch was reduced to 0.6 µm, the maximum electric field decreased by 33%, from 1.95e+3 to 1.32e+3 V/cm, and the VBK increased by 345%, from 30.2 to 134.4 V.

Unmanned aerial vehicles (UAVs) are one of the most promising innovative technologies invented in recent years to promote precision agriculture and smart farming. UAVs can not only reduce labor requirements but also increase production output, reduce the use of pesticides, and protect the environment. However, previous studies on agricultural UAVs have mostly focused on technical problems such as software and hardware design. Few studies have examined users’ behaviors in the implementation process. On the basis of Orlikowski and Gash’s technological frames, this study explored the participants’ cognition and expectation of farmers, pesticide, sprayers, and agriculture officials, who are three key groups of stakeholders involved in the application of UAVs to pesticide spraying, regarding agricultural UAVs and examined how the conflicts between their cognition and expectation influenced the choice of using pesticide spraying UAVs. The conclusions of this study contributed to supplement the content and broaden the scope of application of technological frame theory and provided a crucial reference for the promotion of agricultural UAVs in practice.

The rapid growth rate of the elderly population is a serious current issue in most countries, affecting them economically through needed medical treatment and healthcare planning. The priority concern is how to reduce the number of elderly people requiring long-term healthcare and raise the number who are able to live independently. This study executed a behavior assessment of elderly person’s self-reported use of electric scooters and analyzed their degree of acceptance of these assisted living tools, partly through a related factor analysis of our survey instrument. We used this questionnaire survey as our research method, applying SPSS22 software for factor analysis that revealed five survey facets.

In kidney, epithelial barrier has diverse functions in body fluid and electrolyte homeostasis, and urine production. Maintaining epithelial integrity fundamentally builds up physiological functionality of the renal epithelial barrier (REB). Specially, the REB) states regularly in osmotic dynamics. The osmotic dynamics gives rise of osmotic pressure that is a physical force. Overloading of osmotic pressure can crack epithelial integrity and damage REB. How REB endures the osmotic pressure force yet remains enigmatic. LMO7 (LIM domain only 7) is a protein associated with cell-cell junctional complex and cortical F-actin. LMO7 upregulation was observed in cells cultured in hypertonic condition. In kidney, LMO7 predominantly distributes in epithelial cells in renal tubules. Hypertonic stimulation leads to assembly of LMO7 and F-actin in cortical stress fibers in renal epithelial cells. Hypertonic-isotonic alternation as pressure force pushing plasma membrane inward/outward was set as osmotic disturbance and was applied to test FAK signaling and LMO7 functioning in maintaining junctional integrity. Along with junctional integrity, LMO7 depleted cells resulted in loss of junctional integrity in the epithelial sheet cultured hypertonic medium or hypertonic-isotonic alternation. On the other hand, FAK inhibited by PF-573228 leads to failure in robust cortical F-actin assembly and association of LMO7 with cortical F-actin in epithelial cells responding upon hypertonic stress. Epithelial integrity in context of osmotic stress, LMO7 and FAK signaling both involves in assembling robust cortical F-actin and maintaining junctional integrity. The LMO7 elaborately manages FAK activation in renal epithelial cells, which was evidently demonstrated in NRK-52E cells who have excessive FAK activation and lost epithelial integrity when cells with LMO7 depletion exposed to hypertonic environment. Our data suggests that LOM7 manages FAK activation and is responsible for maintaining REB under osmotic disturbance.

Silicon photonics is emerging as a competitive platform for electronic-photonic integrated circuits (EPICs) at the 2 µm wavelength band where GeSn photodetectors (PDs) have proven to be efficient PDs. Here, we present a comprehensive theoretical study of GeSn vertical p-i-n homojunction waveguide photodetectors (WGPDs) that have a strain-free and defect-free GeSn active layer for 2-µm Si-based EPICs. The use of a narrow-gap GeSn alloy as the active layer can fully cover entire the 2 µm wavelength band. The waveguide structure allows for decoupling the photon-absorbing path and the carrier-collection path, thereby allowing for simultaneous achievement of high-responsivity and high-bandwidth (BW) operation at the 2-µm wavelength band. We present the theoretical models to calculate the carrier saturation velocities, optical absorption coefficient, responsivity, 3-dB bandwidth, zero-bias resistance, and detectivity, and optimize this device structure to achieve highest performance at the 2-µm wavelength band. The results indicate that the performance of the GeSn WGPD has strong dependence on the Sn composition and geometric parameters. The optimally designed GeSn WGPD with 10% Sn concentration can give responsivity of 1.55 A/W, detectivity of 6.12×1010 cmHz½W-1 at 2 µm wavelength, and ~97 GHz BW. Therefore, this optimally designed GeSn WGPD is a potential candidate for silicon photonic EPICs offering high-speed optical communications.

Upper mesophilic temperature acclimation of halophilic, hydrogen-producing bacteria from salt fields was investigated in this study, along with the changes in microbial abundance during an-aerobic digestion (AD) process. Genomic approaches such as PCR-denaturing gradient gel elec-trophoresis (DGGE) and next-generation sequencing (NGS) were performed to profile the mi-crobial communities. During AD, there was a significant abundance of Halanaerobacter lacunarum at 48°C followed by the increase in hydrogen yield, signifying potential contribution from the halophile in the hydrogen production. A decrease in the dominance of H. lacunarum and Halan-aerobium fermentans at 42°C, likely due to an increase in other bacterial species, was noted but their dominance significantly increased at temperatures of 45°C and 48°C. This investigation provides valuable insights in highlighting the potential of Halanaerobium sp. and the other halo-philic bacteria to adapt under upper mesophilic temperature conditions and synthesizing hy-drogen. The findings in the present study also underscore the importance of optimizing temper-ature and pH conditions to maximize hydrogen yield during high-salt anaerobic digestion.

This study evaluated the effects of fluoride on subsurface enamel demineralization induced by two commonly used chemical models. Forty-eight enamel blocks were demineralized at pH = 5.0 by an acetate buffer (Group 1), a lactate buffer (Group 2), an acetate buffer with 0.02 ppm fluoride (Group 3) and a lactate buffer with 0.02 ppm fluoride (Group 4) at 25 °C for 3 weeks. The surface destruction percentage (SDP), mineral loss and lesion depth of the blocks were studied using micro-computed tomography. An elemental analysis of the enamel surface was evaluated using an energy-dispersive X-ray spectroscopy. Surface micro-hardness was determined by the Knoop Hardness Test. The mean lesion depth of Groups 1 through 4 were 134.1 ± 27.2 µm, 96.1 ± 16.5 µm, 97.5 ± 22.4 µm and 91.1 ± 16.2 µm, respectively (p < 0.05; group 1 > 2, 3 > 4). The SDPs of groups 1 through 4 were 7.8 ± 8.93%, 0.71 ± 1.6%, 0.36 ± 1.70% and 1.36 ± 2.94% (p < 0.01; group 1 > 2, 3, 4). The fluoride in mean weight percentages of groups 1 through 4 were 1.12 ± 0.24%, 1.10 ± 0.20%, 1.45 ± 0.40% and 1.51 ± 0.51%, respectively (p < 0.01; group 3,4 > 1,2). The mean Knoop hardness values of groups 1 through 4 were 27.5 ± 13.3, 39.7 ± 19.3, 73.6 ± 44.2 and 91.0 ± 57.2, respectively (p < 0.01; group 4 > 3 > 2 > 1). The chemical model using an acetate buffer solution created significantly deeper zones of subsurface demineralization on enamel than the lactate buffer solution. An acetate buffer may damage the enamel surface, but the surface damage can be prevented by adding fluoride.

Eco-innovation denotes developing green practices using environmentally friendly innovative approaches or technologies. Although, eco-innovation has been broadly applied in different in-dustries, such as low-carbon production and manufacturing, how to implement such innovation in education for sustainable development (ESD) has rarely been studied. Therefore, this research considered a reflective and cooperative learning approach to science, technology, engineering, arts, and math (STEAM) education. A case study examined Wanluan Township of Pingtung County in southern Taiwan. Four departments’ students and teachers at Meiho University were involved in situated learning. Students of hospitality management played farm owners who en-gaged in organic agriculture to produce food and beverages. These agricultural products were farm-to-table, cooked and served for customers in a natural dining setting through the students’ teamwork. Students of tourism, sports & leisure management, and food science & nutrition played tourists in a self-guided travel context, who engaged in acts such as visiting buildings to understand heritage while observing that the houses were still in use a dwelling. This encouraged reflection on the importance of cultural preservation. According to the results from the role-play farm owners and tourists, eco-innovation can represent a sustainable marketing strategy for im-proving the local-community economy and can be implemented in a practical situation in STEAM. The goal of ESD for 2030 — societal transformation — is to foster students’ responsible behavior and attitudes in a personally authentic manner, thereby fostering sustainability learning and understanding.

The enhancement of health-beneficial omega-3 long chain polyunsaturated fatty acid (n-3 LC-PUFA) contents in the muscle, liver, heart and kidney of Australian prime lambs through pasture grazing and supplementation with oil infused pellets was investigated. Forty-eight first-cross prime lambs were randomly assigned into a split-plot design with pasture type as the main plot effect and pellet supplementation as a sub-plot effect in a feeding trial that lasted for nine weeks. The n-3 LC-PUFA content in Longissimus dorsi muscle of all lambs was well above the 30 mg threshold for “omega-3 source” nutrition claim under the Australian Food Standards and Guidelines. Pasture type impacted the fatty acid contents in muscle, heart and kidney of prime lambs. Lambs grazing cocksfoot only had the highest 18:3n-3 (ALA) and n-3 LC-PUFA contents (67.1 mg/100g and 55.2 mg/100 g, respectively). Supplementation of pellets with or without oil infusion to grazing lambs decreased the ALA and n-3 LC-PUFA contents and increased n-6/n-3 ratio in Longissimus dorsi muscle. The fatty acid content in internal organs of grazing lambs was also affected by pellet supplementation. The liver and kidney of grazing lambs were both “good sources” (60 mg/100 g) of omega-3. The cocksfoot grass showed considerable potential for producing healthy, premium quality meat with high contents of n-3 and n-3 LC-PUFA which may consequently enhance the omega-3 intake of Australian lamb consumers.

Lung cancer has been the leading cause of cancer death in the world. In addition to smoking, estrogen is supposed to play an important role in the lung cancer development because women have a higher proportion of adenocarcinoma than men. In the environment, there are many metabolites and wastes that mimic human estrogen structurally and functionally. As an oral contraceptive, 17α-ethynylestradiol (EE2) is released to wastewater after being utilized. Moreover, 4-nonylphenol (NP) exiting in the petrochemical products and air pollutants has estrogenic activity. In our study, 17β-estradiol (E2), EE2, and NP are administered to stimulate A549 male lung adenocarcinoma cells and H1435 female lung adenocarcinoma cells. The results demonstrate that EE2 and NP stimulate A549 and H1435 cells proliferation in a dose- and time-dependent trend. Both estrogen receptor α and β are activated simultaneously during these processes. Up-regulation of epidermal growth factor receptor (EGFR) and ERK expression is involved in response to estrogens. In conclusion, we first time report that EE2 and NP exert biotoxic effect to stimulate the proliferation of both male and female lung cancer cells in a dose- and time- response manner. New challenges from environmental hormones to lung cancer deserved further investigation.

This study investigated live animal performance and carcass characteristics of Australian prime lambs fed oil based polyunsaturated fatty acid (PUFA) enriched pellets in a feedlot system. The tested hypothesis was that supplementation of lambs with a variety of dietary oil based PUFA enriched pellets would enhance growth and carcass characteristics compared with the control lambs on lucerne only. Seventy-two, 6 months old White Suffolk x Corriedale first-cross prime lambs with an average liveweight (LWT) of 35.7 ± 0.9 kg were allocated to six treatment groups in a completely randomised experimental design. The treatments were: (1) control: lucerne hay only; or lucerne hay plus wheat-based pellets infused with 50 ml/kg DM of oils from (2) rice bran (RBO); (3) canola (CO); (4) rumen protected (RPO); (5) flaxseed (FO) and (6) safflower (SO) dietary sources. All lambs had ad libitum access to lucerne hay and clean fresh water. Supplemented lambs were fed 1kg of pellet/head/day for 10 weeks. Feed intake, final LWT, average daily gain (ADG), body conformation and carcass characteristics of lambs in the supplemented groups were all greater than for the control group. SO lambs had the lowest ADG of 190.3 g/day. RBO and CO treatments had the lowest feed cost per unit gain of AU$ 3.0/kg. Supplemented lambs had similar over the hooks (OTH) incomes that were all higher than that of the control group. This empirical evidence-based data demonstrated that supplementation of lambs with RBO and CO had comparatively lower feed costs without compromising ADG, carcass characteristics and OTH income.

The interest in renewable energy to replace fossil fuel is increasing as the problem caused by climate change become more severe. Small hydropower (SHP) is evaluated as a resource with high development value because of its high energy density compared to other renewable energy sources. SHP may be an attractive and sustainable power generation environmental perspective because of its potential to be found in small rivers and streams. The power generation potential could be estimated based on the discharge in the river basin. Since the river discharge depends on the climate conditions, the hydropower generation potential changes sensitively according to climate variability. Therefore, it is necessary to analyze the SHP potential in consideration of future climate change. In this study, the future prospect of SHP potential is simulated for the period of 2021 to 2100 considering the climate change in three hydropower plants of Deoksong, Hanseok, and Socheon stations, Korea. As the results, SHP potential for the near future (2021 to 2040) shows a tendency to be increased and the highest increase is 23.4% at the Deoksong SPH plant. Through the result of future prospect, we have shown that hydroelectric power generation capacity or SHP potential will be increased in the future. Therefore, we believe that it is necessary to revitalize the development of SHP in order to expand the use of renewable energy. Also, a methodology presented in this study could be used for the future prospect of the small hydropower potential.

Nonalcoholic fatty liver disease (NAFLD) and nonalcoholic steatohepatitis (NASH) are fast becoming the most common chronic liver disease and are often preventable with healthy dietary habits and weight management. Sugar-sweetened beverage (SSB) consumption is associated with obesity and NAFLD. However, the impact of different types of SSB, including artificially sweetened beverages (ASB), is not clear after controlling for total sugar intake and total caloric intake. In this study, we examined the association between different SSB consumption and the risk of NAFLD and NASH. A total of 3,739 US adults aged ≥20 years old who had completed 24-hour dietary recall interviews and measurements, including dietary, SSB, smoking, physical activity, and liver stiffness measurement, using the National Health and Nutrition Examination Survey 2017-2020 surveys were included in this study. Chi-square tests, t-tests, and weighted logistic regression models were utilized for analyses. The prevalence of NASH was 20.5%, and NAFLD (defined without NASH) was 32.7% of .S.U.S. adults. We observed a higher prevalence of NASH/NAFLD in men, Mexican-Americans, sugar intake from SSB, light-moderate alcohol use, individuals with lower physical activity levels, higher energy intake, obesity, and medical comorbidities. Heavy sugar consumption through SSB was significantly associated with NAFLD (aOR=1.60, 95% CI=1.05-2.45). In addition, intake of ASB only (compared to non-SSB category) was significantly associated with NAFLD (aOR=1.78, 95% CI=1.04-3.05), after adjusting for demographic, risk behaviors, and body mass index. Higher sugar intake from SSB and exclusive ASB intake are both associated with the risk of NAFLD.

2-Methylquinazolin-4(3H)-one was prepared by reaction of anthranilic acid, acetic anhydride and ammonium acetate. The reaction of 2-methylquinazolin-4(3H)-one with N-aryl-2-chloroacetamides in acetone in the presence of potassium carbonate gave nine N-aryl-2-(2-methyl-4-oxoquinazolin-3(4H)-yl)acetamide compounds. The structures of these compounds were elucidated on the basis of their IR, 1H-NMR, 13C-NMR and HR-MS spectral data. These synthesized compounds containing the 2-methyl-3,4-dihydroquinazolin-4-one moiety exhibited excellent activity against Aedes aegypti mosquito larvae with LC50 values in the range of 2.085-4.201 μg/mL after 72 h exposure. Interestingly, these compounds did not exhibit toxicity to the non-target organism Diplonychus rusticus. In silico molecular docking revealed acetylcholine binding protein (AChBP) and acetylcholinesterase (AChE) to be potential molecular targets. These data indicated the larvicidal potential and environmental friendliness of these N-aryl-2-(2-methyl-4-oxoquinazolin-3(4H)-yl)acetamide derivatives.

Excessive body fat is a major contributor to obesity, which is related to high blood, total cholesterol and triglycerides. Lemons (Citrus limon) are renowned for their antioxidant and lipid-lowering properties. First, Sugar-free fermentation demonstrated better results lower sugar content and was identified as the preferred fermentation method. Next, the effect of two doses of sugar-free fermented lemon peel juice (SF-FLPJ) on obesity was investigated. Sprague Dawley (male rats) were randomly divided into 4 groups and fed a standard feed or high-fat diet (HFD) to induce fatness for eight weeks. The two groups of rats fed an HFD were administered SF-FLPJ at 0.45 or 0.9 g/kg body weight daily for eight weeks. The obese rats administered 0.9 g/kg (body weight/day) of SF-FLPJ exhibited significant reductions in body fat mass and percentage; they also had lower blood cholesterol and triglyceride levels than the other groups. Additionally, the rats displayed diminished liver fat accumulation. The results suggest that SF-FLPJ can be a supplement in managing body fat, contributing positively to addressing obesity within the context of health management, and reduce obesity-associated issues.

Since the outbreak of the COVID-19 pandemic, patients infected with COVID-19 may experience abnormal heart rates, posing potential health risks. This study proposes a non-contact method for measuring heart rate (HR) and heart rate variability (HRV) to effectively reduce the risk of infection and assist healthcare professionals in more accurate diagnosis and treatment. In this study, except for the different image acquisition method, other research processes and methods are similar to the research methods in [15]. The image acquisition method is changed from forehead image to palm image. The new non-contact measurement performance of the proposed method can effectively not only avoid infection concerns but also obtain heart rate and HRV quickly and conveniently, providing higher accuracy for physiological parameters, root mean square error (RMSE), and mean absolute percentage error (MAPE) compared to those in recently published papers.

Lower urinary tract dysfunction (LUTD) was associated with bladder inflammation and tissue hypoxia with oxidative stress. This study investigated the profiles of urine inflammatory and oxidative stress biomarkers in females with LUTD and to develop a urine biomarker-based decision tree model for the prediction. Urine samples were collected from 31 female patients with detrusor overactivity (DO), 45 with dysfunctional voiding (DV), and 114 with interstitial cystitis/ bladder pain syndrome (IC/BPS). The targeted analytes included 15 inflammatory cytokines and 3 oxidative stress biomarkers (8-hydroxy-2-deoxyguanosin, 8-isoprostane, and total antioxidant capacity [TAC]). Different female LUTD groups had distinct urine biomarker profiles, including IL-1β, IL-2, IL-8, IL-10, eotaxin, CXCL10, MIP-1β, RANTES, TNFα, VEGF, NGF, BDNF, 8-isoprostane, and TAC. The urine biomarker-based decision tree, using IL-8, IL-10, CXCL10, TNFα, NGF, and BDNF as nodes, demonstrated an overall accuracy rate of 85.3%. DO, DV, and IC/BPS accuracy rates were 74.2%, 73.3%, and 93.0%, respectively. Internal validation revealed similar overall accuracy rate. Random forest models supported the significance and importance of all selected nodes in this decision tree model. Urine inflammatory and oxidative stress biomarker profiles of different female LUTDs were different. This internally validated urine biomarker-based decision tree model predicted different female LUTDs with high accuracy.

Osteoporosis is a common problem in orthopedic medicine, and it has become an important medical issue in orthopedics as Taiwan is gradually becoming an aging society. In the diagnosis of osteoporosis, the bone mineral density (BMD) derived from dual-energy X-ray absorptiometry (DXA) is the main criterion for orthopedic diagnosis of osteoporosis, but due to the high cost of this equipment and the lower penetration rate of the equipment compared to the X-ray images, the problem of osteoporosis has not been effectively solved for many people who suffer from osteoporosis, however, at present, in clinical diagnosis, doctors are not yet able to accurately interpret X-ray images for osteoporosis manually, and must rely on the data obtained from DXA. In recent years, with the continuous development of artificial intelligence, especially in machine learning and deep learning, significant progress has been made in image recognition. Therefore, it is worthwhile to revisit whether it is possible to use a convolutional neural network model to read a hip X-ray image and then predict the patient's BMD. In this study, we proposed a hip X-ray image segmentation model and a hip X-ray image recognition classification model. First, we used the U-Net model as a framework to segment the femoral neck, greater trochanter, wards triangle, and the total hip in the hip X-ray images. We then performed image matting and data augmentation. Finally, we constructed a predictive model for osteoporosis using deep learning algorithms. In the segmentation experiments, we used intersection over union (IoU) as the evaluation metric for image segmentation, and both the U-Net and U-Net++ models achieved segmentation results greater than or equal to 0.5. In the classification experiments, using the T-score as the classification basis, the total hip using the DenseNet121 model has the highest accuracy of 74%.

Salinity intrusion is one of the most serious consequences of climate change coupled with rising sea level that significantly affects agricultural activities in many parts of the world. This phenomenon has increasingly become more serious and frequently occurred in the Mekong Delta of Vietnam. As a result, Vietnam has been ranked among top five countries where have been devastatingly impacted by climate change, in particular, its Tra Vinh Province characterized by coastal plain and alluvial deposit. In addition, this area is of the tropical monsoon zone of long rainy season with source of salt brought from the sea by the tides and sea level rise. Regions that are contaminated by salt are located in lowland and often suffer from floods linking to tidal effects with salty water from river systems and channels. Soil salinity evaluation is critical for coastal protection, restoration, and agricultural planning since it can be considered as an agricultural indicator to evaluate quality of soil. Here, we attempt to estimate the soil salinity in Tra Vinh Province, in the Mekong Delta of Vietnam. Landsat 8 OLI images are utilized to derive indices for soil salinity evaluation including single bands, Vegetation Soil Salinity Index (VSSI), Soil Adjusted Vegetation Index (SAVI), Normalized Difference Vegetation Index (NDVI), and Normalized Difference Salinity Index (NDSI). Subsequently, satistical analysis between soil salinity, electrical conductivity (EC, dS/m), and environmental indices derived from Landsat 8 OLI image is performed. Results indicate that spectral value of Near Infrared (NIR) band and VSSI are highly correlated with EC (R2 = 0.7779 and R2 = 0.6957, respectively) in comparison with the other indices. Comparative results show that soil salinity derived from Landsat 8 is consistent with in situ data. Findings of this study demonstrate that Landsat 8 OLI images reveal a high potential for spatiotemporally monitoring the magnitude of soil salinity at the top soil layer. Outcomes of this study are useful for agricultural activities, planners, and farmers by providing the base map of soil salinity contamination for better selection of accomodating crop types to reduce economical lost in the context of climate change. Our proposed method that estimates soil salinity using satellite-derived variables can be applied in the other regions.

Ferulic acid esters have been suggested as a group of natural chemicals with sunscreen function. The study aimed to utilize an environment-friendly enzymatic method to produce octyl ferulate by esterification of ferulic acid with octanol. The Box-Behnken design with response surface methodology (RSM) was adopted to evaluate the effects of synthesis variables, including reaction temperature (70–90 °C), enzyme amount (1000–2000 PLU) and stir speed (50–150 rpm), on the molar conversion of octyl ferulate. According to the joint test, both the reaction temperature and enzyme amount had great impacts on the molar conversion. RSM-developed second-order polynomial equation further showed great ability on data-fitting. Based on ridge max analysis, the optimum parameters for the biocatalyzed reaction were: 72 h reaction time, 92.2 °C reaction temperature, 1831 PLU enzyme amount and 92.4 rpm stir speed, respectively. Finally, the molar conversion of octyl ferulate under optimum condition was verified to be 93.2 ± 1.5%. In conclusion, high yield of octyl ferulate synthesized by commercial immobilized lipase under elevated temperature conditions has been suggested, which our findings could broaden the utilization of the lipase and provide a biocatalytic approach, instead of the chemical method, for ferulic acid ester synthesis.

This paper proposes two fully-automatic machine-extracted linguistic features from an unlimited text input for Mandarin prosody generation. One is the punctuation confidence (PC) which measures the likelihood of inserting a major punctuation mark (PM) at a word boundary. Another is the quotation confidence (QC) which measures the likelihood of a word string to be quoted as a meaningful or emphasized unit in text. Because a major PM in a text is highly correlated with a prosodic break, and a quoted word string plays an important role in human language understanding, the two features potentially could provide useful information for prosody generation. The idea is first realized by employing conditional random field (CRF)-based models to predict major PMs, quoted word string locations, and their associated confidences, i.e., the PC and the QC, for each word boundary. Then, the predicted punctuations and their confidences are combined with traditional contextual linguistic features to predict prosodic-acoustic features. Both objective and subjective tests showed that the prosody generation with the proposed linguistic features performed better than the one without the proposed features. So, the proposed PC and QC are promising features for Mandarin prosody generation.

Nerve hydrodissection (HD), a technique used when treating nerve entrapments, involves using an anesthetic or solution such as saline or 5% dextrose solution to separate the nerve from the surrounding tissue, fascia, or adjacent structures. This technique aims to treat neuropathic pain, or pain caused by the nerve. Ultrasound-guided HD of peripheral nerves has gained significant attention in the medical profession and pain management fields in recent years. This is due to a number of high impact publications of randomized control trials demonstrating the efficacy and safety of this technique for the treatment of carpal tunnel syndrome. Even the 20th edition of Harrison’s Principles of Internal Medicine textbook lists injection of 5% dextrose as an alternative local treatment that does not have the side effects of corticosteroids. At present, there is no review of the current literature on this technique. This manuscript will summarize and discuss the following: 1) the different approaches to doing ultrasound-guided HD of nervous structures, 2) its usages in different clinical situations, 3) its clinical pearls, 4) the solution used, and 5) the postulated mechanisms of action.

To date, soil salinity becomes a huge obstacle for food production worldwide since salt stress in plants is one of the major factors limiting agricultural productivity. It is estimated that a significant loss of crops (20%–50%) would be due to drought and salinity. To embark upon this harsh situation, numerous strategies such as plant breeding, plant genetic engineering, and a large variety of agricultural practices including the applications of plant growth-promoting rhizobacteria (PGPR) and seed biopriming technique have been developed to improve plant defense system against salt stress, resulting in higher crop yields to meet human’s increasing food demand in the future. In the present review, we update and discuss the advantageous roles of beneficial PGPR as green bioinoculants in mitigating the burden of high saline conditions on morphological parameters and on physio-biochemical attributes of plant crops via diverse mechanisms. In addition, the applications of PGPR as a useful tool in seed biopriming technique are also updated and discussed since this approach exhibits promising potentials in improving seed vigor, rapid seed germination, and seedling growth uniformity, Furthermore, the controversial findings regarding the fluctuation of antioxidants and osmolytes in PGPR-treated plants are also pointed out and discussed.

Improving air quality and reducing human exposure to unhealthy levels of airborne chemicals are important global missions, particularly in China. Satellite remote sensing offers a powerful tool to examine regional trends in NO2, thus providing a direct measure of key parameters that strongly affect surface air quality. To accurately resolve spatial gradients in NO2 concentration using satellite observations and thus understand local and regional aspects of air quality, a priori input data at sufficiently high spatial and temporal resolution to account for pixel-to-pixel variability in the characteristics of the land and atmosphere are required. In this paper, we adapt the Berkeley High Resolution product (BEHR v3.0A, v3.0B and v3.0C) and meteorological outputs from the Weather Research and Forecasting (WRF) model to describe column NO2 in southern China. The BEHR approach is particularly useful for places with large spatial variabilities and terrain height differences such as China. We retrieved tropospheric NO2 vertical column density (TVCD) within part of southern China, for four seasons of 2015, based upon satellite datasets from Ozone Monitoring Instrument (OMI). Retrieval results are validated by comparing with MAX-DOAS tropospheric column measurements conducted in Guangzhou. BEHR retrieval algorithms are more consistent with MAX-DOAS measurements than OMI-NASA retrieval, opening new windows into research questions that require high spatial resolution, for example retrieving NO2 vertical column and ground pollutant concentration in China and other countries.