In this work, we report the engineering of a sub-70 nm nanocomposite of ZnO/Zn2TiO4 using a low-temperature solution-phase method. Titanium isopropoxide and zinc acetate were used as precursors, and isopropyl alcohol and water were used as solvents. The investigation focused on the growth of nanocomposites by varying the concentrations of precursors and surfactants, as well as their efficiency within different pH ranges. All three ZnO/Zn2TiO4 nanocomposites consist of hexagonal wurtzite ZnO and Zn2TiO4 structures in the three nanocomposites. The crystallite size in three ZnO/Zn2TiO4 nanocomposites, with a hexagonal wurtzite ZnO structure, were measured to be 62.67, 40.34, and 39.50 nm. The crystallite size values in three ZnO/Zn2TiO4 nanocomposites were 26.15 nm, 25.36 nm, and 21.24 nm, respectively, with Zn2TiO4. Morphological observations, conducted using FESEM, reveal the formation of three ZnO/Zn2TiO4 nanocomposites across the entire sample. These nanocomposites resemble dispersed cotton packets, with sizes ranging from 18 to 350 nm. Peaks in the range of 610-1250cm-1 are attributed to Ti-O bond formation and peak located at 1350-1450 cm-1 are attributed to Zn-O bond formation. Also, EDX spectrum reveals peaks for various sample components such as Ti, O and Zn. UV spectrums confirmed the formation of three nanocomposite of ZnO/Zn2TiO4 as showing two peaks for each sample. Photocatalytic investigation carried out by analyzing the UV-Visible absorption spectra of methylene blue dye on the surface of ZnO/Zn2TiO4 nanocomposites, dye degradation at various irradiation time intervals, dye degradation at varied catalyst concentrations and the influence of pH on dye-degradation. Furthermore, the said nanocomposites were used to degrade environmental pollutant (Methylene blue dye). Different sets of experiments were conducted under ambient conditions which show an excellent photo catalytic degradation efficiency.

Most of the municipalities in the Gulf region are facing performance related issues in their municipal solid waste management (MSWM) systems. They lack to possess a deliberate inter-municipality benchmarking processes. Instead of identifying the performance gaps for their key components (e.g., personnel productivity, operational reliability, etc.) and adopt proactive measures, the municipalities primarily rely on an efficient emergency response. A novel hierarchical modeling framework, based on deductive reasoning, is developed for performance assessment of MSWM systems. Fuzzy rule based modeling using Simulink-MATLAB was used for performance inferencing at different levels, i.e., component, sub-components, etc. The model is capable of handling the inherent uncertainties due to limited data and imprecise knowledge base. The model’s outcomes can exclusively assist the managers working at different levels of organizational hierarchy for effective decision-making. Performance of the key component, assists the senior management to assess the overall compliance level of performance objectives. Subsequently, operation management can hone in the sub-components to acquire useful information for intra-municipality performance management. While, individual indicators are useful for inter-municipality benchmarking. The model has been implemented on two municipalities operating in Qassim Region, Saudi Arabia. The results demonstrate the model’s pragmatism for continuous performance improvement of MSWM systems in the country and elsewhere.

In this paper, a plasmonic refractive index sensor based on MIM waveguide (metal_insulation_metal) with two plasmonic waveguides and five rings and two teeth and four rectangular cavities is proposed and designed. The refractive index of the resonators as well as the resonant wavelengths will be investigated by the time difference finite difference method. To achieve an optical sensor with excellent quality and performance, we change the number and type of amplifiers and their dimensions. In each stage of the simulation, we will only change the refractive index of the middle ring located in the middle of the two waveguides, and the refractive index of the other amplifiers remains the same. This challenge will help to form a more appropriate structure for optical sensors. The sensor built in this simulation has a balanced and suitable function for integrated circuits and helps researchers to better understand the design of plasmonic structures. It also has important applications in medical research, health care, drug manufacturing, security monitoring and environmental protection, internal security of countries and the battlefield.

In this study, we seek to analyze and numerically evaluate a plasmonic sensor. To form the sensor structure, we use several amplifiers, such as two rings attached to each other and a cavity, as well as two metal insulating metal waveguides (MIM). At the beginning of this simulation, we must examine the resonant wavelengths and the refractive index of the resonators using the finite difference time domain method. By changing the refractive index and changing the dimensions of the cavity and the rims, we seek to investigate the sensor performance and the conduction characteristics of the plasmonics and to obtain the effect of these parameters. To evaluate the sensor performance, we calculate the three factors of sensitivity coefficient S, quality factor Q and figure of merit (FOM), here we reach the sensitivity of 987.6 nm / RIU. Such a plasmonic sensor with a simple framework and high optical resolution can be very useful for sensor systems on optical circuits.

Asphaltene is a component of crude oil that, if mishandled, may create substantial transportation and industrial concerns. It is a solid by nature, with a diverse set of molecular compositions. Furthermore, the oil industry has identified emulsion generation and clogging precipitate as key concerns. The emulsified water droplets in the process are just what give the raw oil its increased viscosity; hence, power is squandered to transport the oil around. The information has been separated into sections based on simulation, solubilization, agglomeration, precipitation, and evidence of model chemicals in the literature. We have included research that investigates the bulk rheology and interfacial rheology of asphaltene to describe its interfacial activity more clearly.

Ticks are one of the most dominant forced ectoparasites of vertebrates, belonging to the arthropods, which transmit pathogens such as bacteria, viruses, and parasites to humans and animals in Iran and worldwide. Given that, sex ratio factors can affect the epidemiology of vector-borne diseases, this study aimed to identify and determine the ticks' sex ratio and host type (camels, sheep, cattle, dogs, chickens, and pigeons) in different areas of Tehran province. This descriptive cross-sectional study took samples from different animal body parts in four seasons from 20 villages in 2019, in which 685 hard ticks and 121 soft ticks were caught from 1623 studied livestock and poultry. Regarding sex segregation among all caught ticks, 42.01% were male, and 57.99% were female. It is noteworthy that in both mountain and plain environments, R. sanguineus species of hard ticks had the most elevated sex ratio. Most ticks were collected from sheep hosts with 60.04% and the lowest from cattle hosts with 0.62% in tick infestation.

Using two metal insulated metal waveguides (MIM) and five resonator (a quadrilateral cavity and three rings with different dimensions), we design a plasmonic refractive index sensor. Using the time domain finite difference method, we examine and analyze the sensor performance (numerical analysis) and using the transmission line model method, we theoretically examine the performance of the sensor By summarizing these two methods and calculating the sensitivity coefficient S, quality coefficient Q and figure of merit (FOM), a plasmonic sensor with good performance is obtained. Using the supermods of the resonators, we will achieve a stable wavelength spectrum and a suitable and stable sensitivity coefficient spectrum. Challenges and changes that occur in different modes of this sensor will lead to a balanced and relatively good structure. This designed sensor can be useful in the development of integrated optical circuits.

Introduction: Papatasi fever, or three-day fever, is a viral disease transmitted by a species of female sandfly called Phlebotomus papatasi that has symptoms similar to influenza. Robat Karim County, due to the high abundance of Sandfly and climate change in recent years, provides a suitable environment for the growth and reproduction of Sandfly, especially Phlebotomus papatasi Therefore, the aim of this study was molecular monitoring of Papatasi fever virus in Sandfly of Robat Karim County, Tehran province. Materials and methods: In 7 selected areas in Robat Karim County, 679 Sandfly using sampling methods including traps and aspirators were caught and 500 samples were randomly selected according to the fishing location and transferred to the laboratory of the Medical Entomology Department. After fixing Sandfly on the slide surface, identification and percentage of frequency of sandfly species were determined and then by Real-time PCR method, molecular examination of Papatasi virus infection was performed at Tehran Pasteur Institute. Findings: Out of 679 samples taken, 310 (45.65%) belonged to males and 369 (54.35%) belonged to females. 7 species including 3 species of Sandfly of the genus Phlebotomus and 4 species of the genus Sergentomyia were identified among the samples, the highest percentage of catch belonged to Phlebotomus sergenti (28.57%). Of the 500 samples sent to the laboratory for testing for phleboviruses by Real-time PCR, no positive cases of Papatasi virus infection were observed in them. Conclusion: Robat Karim is one of the endemic areas of infectious diseases such as leishmaniasis. Due to climate change in this region that conditions for the growth and reproduction of Sandfly, especially Phlebotomus papatasi as a Vector of sandfly fever and since the sandfly fever disease is not vaccinated therefore, preventive measures to control and reduce diseases transmitted by Sandfly are important.

In this paper, a plasmonic refractive index sensor based on metal insulated metal waveguide (MIM) with three rings and a resonant cavity is first proposed and numerically evaluated. Next, we add four teeth to the sensor structure. We study and simulate the resonant wavelengths and refractive index of resonators using the time difference finite difference method. Given that the sensor and the conduction characteristics of plasmonic waves are influenced by the structure parameters,Therefore, by changing the refractive index and changing the dimensions and coordinates of the cavity and rims, we can change the passage coefficient in the resonant modes and measure the sensor performance. As a result, we obtain the sensitivity coefficient, the figure of merit (FOM) and the quality factor Q of the sensor. We modulate the resonance wavelength FWHM using the generated modes and reach a sensitivity of 2166 nm / RIU. These plasmonic sensors with a simple framework and balanced performance and high optical resolution can be used to measure the refractive index in the medical, chemical and food industries.

Cellulose nanocrystals (CNCs) are a kind of nano-inclusions that have experienced tremendous expansion in the material industry due to their outstanding mechanical qualities, sizable surface area, and capacity for functional tuning. Due to their vast potential, however, present practises fall short of fully using them. For example, employing CNCs in various matrices with various surface chemistries can be challenging; this problem tends to get worse if the focus is furthered on bio-based applications. This paper reviews the use of CNCs as fillers in natural and man-made polymers; we have explored in depth the production, characterisation, and of CNCs from various sources and their inclusion into various matrices. Surface alterations and the introduction of CNCs in biodegradable polymer can have a significant impact on several industrial behemoths such as tissue engineering and biomedical applications; therefore, pursue of current manuscript is extremely warranted. Throughout the manuscript various assembly techniques that involves alteration and adjustment of polymer network in building up a hydrogel with higher fracture energy and mechanical properties are also included. From rheological perspective the hydrogel processing is also discussed with some models routinely used in the literature to describe these hydrogels. Finally, bio-based hydrogels mechanically reinforced with CNCs such as Xanthan Gum, Alginate, protein, and polysaccharides were discussed.

Plant growth promoting rhizobacteria (PGPR) are capable to reduce the use of chemical fertilizers input cost of farmer. Keeping in view the study was designed to investigate and evaluate inoculation effect of indigenous rhizospheric bacteria on growth and yield of wheat (Triticum aestivum L.) under in vitro and in vivo conditions using different treatments. Ten potential strains were selected on the basis of their ACC deaminase activity, siderophore production, P-solubilization and production of indole acetic acid (IAA). Further these strains were tested in three different experiments (growth chamber, pot and field). We found significant increase in crop growth response to the inoculants in comparison with un-inoculated control. In pot and field trial we tested PGPR with recommended dose of inorganic fertilizers. The results of present study revealed that inoculation of bacterial strains with wheat seeds significantly increased plant growth and improved crop yield. Results of present study reveal that these strains could be employed in different combinations and can get higher yield in case of half recommended doses of inorganic fertilizers along with consortium of strains in comparison with sole application of recommended dose of fertilizer and with consortium of strains. These strains were further identified by 16Sr RNA gene sequencing, fatty acid profile and biolog. It can be concluded that inoculated bacteria have more potential and contributes in good crop quality, increased yield when they are applied in combination, thus have potential to minimize use of chemical fertilizers.

Building Information Modelling (BIM) has been more popular in the construction industry as a consequence of the many advantages it offers, such as increased productivity, improved project outcomes, and reduced expenses. However, there are many obstacles that must be overcome before BIM can be widely used. This research uses a poll of construction industry experts to investigate the challenges associated with using BIM in projects. Cost of implementation, inadequate standards and procedures, and a lack of knowledge with BIM were some of the hurdles that were measured in the study. Statistical techniques were used to examine the data, and the findings indicate that the high cost of implementation and the absence of sufficient standards and procedures are the two main obstacles to the widespread adoption of BIM. Problems with supply chain management and a lack of experience with BIM are also mentioned as obstacles. The report also suggests solutions, such as a more focused teaching effort on BIM-related issues and the creation of a specialised BIM curriculum. Professionals in the construction industry may utilise the study’s results to their advantage by expanding their knowledge of the obstacles standing in the way of widespread adoption of BIM.

Cloud infrastructure provides computing services where computing resources can be adjusted on-demand. However, the adoption of cloud infrastructures brings concerns like reliance on the service provider network, reliability, compliance for service level agreements (SLAs), etc. Software-defined networking (SDN) is a networking concept that suggests the segregation of a network’s data plane from the control plane. This concept improves networking behavior. In this paper, we present an SDN-enabled resource-aware topology framework. The proposed framework employs SLA compliance, Path Computation Element (PCE) and shares fair loading to achieve better topology features. We also present an evaluation, showcasing the potential of our framework.

Cloud computing refers to applications delivered as services over the Internet. Cloud systems employ policies that are inherently dynamic in nature and that depend on temporal conditions defined in terms of external events, such as the measurement of bandwidth, use of hosts, intrusion detection or specific time events. In this paper, we investigate an optimized resource management scheme named v-Mapper. The basic premise of v-Mapper is to exploit application-awareness concepts using software-defined networking (SDN) features. This paper makes three key contributions to the field: (1) We propose a virtual machine (VM) placement scheme that can effectively mitigate the VM placement issues for data-intensive applications; (2) We propose a validation scheme that will ensure that a service is entertained only if there are sufficient resources available for its execution and (3) We present a scheduling policy that aims to eliminate network load constraints. An evaluation was carried out with various benchmarks and demonstrated that v-Mapper shows improved performance over other state-of-the-art approaches in terms of average task completion time, service delay time and bandwidth utilization. Given the growing importance of supporting large-scale data processing and analysis in datacentres, the v-Mapper system has the potential to make a positive impact in improving datacentre performance in the future.

Coronavirus that is also known as COVID-19 disease is produced by SARSCoV-2. This causative agent is highly contagious and can cause potentially fatal pneumonia worldwide with serious public health concerns. In the beginning among infected individuals, most of them were those who were mainly shown to the wet animal market in a big city of China known as Wuhan. So, it was suggested that this was almost certainly the zoonotic source of COVID-19illness. The transitional source of origin and their mode of transmission to humans were not known obviously. Conversely, from human to human rapidly transformation have been confirmed generally. Currently, there is no availability of FDA approved clinically antiviral drugs and/or vaccines to be used against the COVID-19. Afterward, SARS-CoV and MERS-CoV, the occurrence of SARS-CoV-2 has been manifested as the third sketch of an enormously pathogenic coronavirus into human population globally. In this review, we provide a brief overview of the history of COVID-19 in Pakistan up-to 18^th weeks after beginning, current situation, epidemiology, and its impact on the human population. Moreover, we focused on physiological variation during the incubation period, genome analysis of SARS-CoV2, supportive treatment approaches, and safety measures in the Pakistani population, which may be supportive for combating the risk of COVID-19 epidemic. We also reviewed the future approaches for the development of therapeutic interventions and vaccines to cope with the COVID-19 epidemic.

Resilience is a particularly important quality for supply chains in this turbulent environment. Resilience in supply chain is the ability to retain, resume, and recover operations after an intense destructive incident. One of the strategic solutions for managing supply chain disruptions is to establish collaboration and strategic alliances in order to achieve competitive advantage. Therefore, given the increasing publication of articles in areas of strategic alliances and supply chain resilience, it is a good opportunity to review these articles, identify gaps in the current literature, demonstrate links between the two areas, and provide suggestions for future research. For these purposes, a bibliometric analysis has been performed on literature available on the Web of Science database. The distribution of articles based on year and country, influential journals, research areas, authors, affiliations, keywords, citations, and reference co-citation analysis are discussed. Results indicate that studies about strategic alliances, meant to increase resilience, are growing in areas such as “Management”, “Operations research”, “Management science”, and “Business”. Furthermore, the sources could be categorized in five clusters; namely “From knowledge concept to value creation”, “Internal and external relationships”, “Logistics and supply chain performance”, “Intellectual capital and strategic management”, and “Critical success factors and alliances”. This article can be useful for both practitioners and academics who explore the topic of strategic alliances and resilience in supply chain and also offers managers the opportunity to overcome supply chain disruptions and negative consequences of risks by becoming familiar with the key concepts of resilience. The persistence of businesses and supply chains is guaranteed through communicating with partners and even competitors in the light of alliance according to the findings of this research. Managers can pay attention to the integration of the supply chain to improve resilience and increase collaboration between suppliers and customers. Given the research results, strategic alliances can be noted in expanding organizational entrepreneurship, and shaping strategic collaboration networks in light of strategic alliances.

A cuprous oxide (Cu₂O) thin layer served as the base for a non-enzymatic glucose sensor in an alkaline medium, 0.1 NaOH solution, with a linear range of 50-200 mg/dL using differential pulse voltammetry (DPV) measurement. An X-ray photoelectron spectroscopy (XPS) study confirmed the formation of the cuprous oxide layer on the thin gold film sensor prototype. Quantitative detection of glucose in both phosphate-buffered saline (PBS) and undiluted human serum were carried out. Neither ascorbic acid nor uric acid even at a relatively high concentration level of 100mg/dL in serum interfered with the glucose detection, demonstrating the excellent selectivity of this non-enzymatic cuprous oxide thin layer based glucose sensor. Chronoamperometry (CA) and single potential amperometric voltammetry were used to verify the measurements obtained by differential pulse voltammetry (DPV), and the positive results validated that the detection of glucose in a 0.1 M NaOH alkaline medium by DPV measurement was effective. Nickel, platinum and copper are commonly used metals for non-enzymatic glucose detection. The performance of these metal-based sensors for glucose detection using DPV were also evaluated. Cuprous oxide (Cu₂O) thin layer based sensor showed the best sensitivity for glucose detection among the sensors evaluated.

This paper attempts at applying adaptive network-based fuzzy inference system (ANFIS) for analysis of the resonant frequency of a microstrip rectangular patch antenna with two equal size slots which are placed on the patch vertically. The resonant frequency is calculated as the position of slots is shifted to the right and left sides on the patch. As a result , the antenna resonates at more than one frequency . Commonly, machine algorithms based on artificial neural networks are employed to recognize the whole resonant frequencies. However ,they fail to estimate the resonant frequencies correctly as in some cases variations are not very sensible and the resonant frequencies overlap each other . It can be concluded that artificial neural networks could be replaced in such designs by the adaptive network-based fuzzy Inference system due to its high approximation capability and much faster convergence rate.

The recent advancements in the field of communication have led data sharing to become an integral part of today's smart cities with the evolution of concepts such as the internet of vehicles (IoV) paradigm. As a part of IoV, Electric Vehicles (EVs) have recently gained momentum as authorities have started expanding their Low Emission Zones (LEZ) in an effort to build green cities with low carbon footprints. Energy is one of the key requirements of EVs not only to support the smooth and sustainable operation of EV itself but to also ensure connectivity between the vehicles and infrastructure with controlling devices like sensors and actuators installed within an EV. In this context, renewable energy sources (such as wind energy) dramatically play their parts in the automobile sector towards designing the energy harvesting electric vehicles (EH-EV) to pare the energy reliance on the national grid. In this article, a novel approach is presented to achieve electric generation due to vehicle mobility to support the communication primitives in electric vehicles which enables plenty of IoV use cases in the presence of surplus energy at hand. A small-scale wind turbine is designed to harness wind power for converting it into mechanical power. This power is then fed to the onboard DC generator to produce electrical energy. Furthermore, the acquired power is processed through a regulation circuitry to consequently achieve the desired power supply for the end load, i.e. the batteries installed. The suitable orientation for efficient power generation is proposed on ANSYS-based aerodynamics analysis. The voltages induced by DC generator at No-Load condition are 35V while at Full-Load 25V are generated at rated current of 6.9A, along with the generation of power at around 100W (at constant voltage) at the rated speed of 90 mph for nominal battery charging. Moreover, the acquired data can be monitored via an android application interface by using a Bluetooth module.

Rebar cages form the skeletal framework of reinforced concrete structural members. They comprise longitudinal and transverse reinforcing bars, usually connected by tie wires. Past studies have identified tie-wire connections as the "weak links" in large, prefabricated rebar cages, leading to their failure during site handling and construction stages. Recent research has explored the use of mechanical U-bolt connectors to bolster stability and safety of rebar cages while reducing their vulnerability and risk of failure. This paper presents a comprehensive experimental and numerical investigation of a new type of mechanical connector, referred to as "Cage Clamp", to enhance rebar cage stability and safety. Component-level experimental tests are conducted to determine the force-displacement response of Cage Clamp connectors for crossbar connections in different degrees of freedom. The results highlight the remarkable strength and stiffness of Cage Clamp connectors, significantly outperforming traditional tie-wire connections. Furthermore, full-scale experimental tests are performed on a circular underground pile-shaft rebar cage with Cage Clamp connectors to assess its behavior under various site handling conditions. The data obtained from these experiments are used to construct and refine detailed 3D finite element models of the rebar cages, capable of capturing the complex behavior of rebar cages with Cage Clamp connectors. Using the numerical model, a sensitivity analysis is performed to assess the effect of the number of Cage Clamps on the deflection and stability of the rebar cage. The findings show that using cage clamps to connect pick-up rebar with lateral reinforcement at every 8 to 10 feet is sufficient to ensure the stability of the cage during typical site handling conditions. The results of this study serve as a basis for establishing analysis, design, fabrication, and handling guidelines for rebar cages, contributing to safe and efficient construction practices.

This research aims to explore the complex interplay between supply chain resilience (SCR), digital supply chain (DSC), and sustainability, focusing on the moderating influence of supply chain dynamism. The goal is to understand how these elements interact within the framework of contemporary supply chain management and how they collectively contribute to enhancing sustainability outcomes. The sample size is 300 CEOs and managers. The study approach integrates quantitative research methods. Structural equation modeling (SEM) is utilized to quantitatively analyze the direct and indirect effects of SCR and DSC on sustainability. The numerous surveys we conduct among supply chain ecosystem stakeholders provide a rich picture of practical implications and contextual nuances. In sum, our early findings generally support a positive relationship between SCR and sustainability in and of itself decrying the need for more resilient supply networks for sustainability. We further find the beneficial impact of digital technologies in promoting sustainability via enhancing environmental control and controlling for efficiency in supply chains. We also offer evidence to show that supply chain dynamism compounds the positive logic between SCR and DSC and sustainability. As a final word, it must be noted that our work speaks to the burgeoning Supply Chain Dynamism as moderator literature by examining the direct and contingent effects of SCR and DSC on not only performance but sustainability. By shedding light on the moderating role of dynamism, the study provides fresh insights into the multifaceted nature of supply chain management and sustainability practices. The study's findings enhance theoretical understanding by elucidating the synergistic effects of SCR, DSC, and sustainability in dynamic supply chain settings. It augments existing theoretical frameworks by integrating concepts of resilience, digitalization, and sustainability into a comprehensive model. Practical and economical, the research offers actionable guidance for organizations aiming to improve sustainability performance through resilient and digitally advanced supply chains. By acknowledging the role of supply chain dynamism, managers can tailor strategies to manage disruptions effectively and leverage digital innovations. Economically, adopting sustainable practices can result in cost savings and competitive advantages. The research emphasizes the importance of aligning supply chain strategies with sustainability goals to drive long-term value and societal impact.

COVID-19 emerged in Wuhan and is later declared as a pandemic by World Health Organization. Different-aged people have varying gender-wise immunity control properties that necessitates understanding COVID-19 impact on age and gender which does not exist, currently. In this paper, COVID-19 surveillance variables are extensively studied along with hospitalization, tests-performed, and recovery data. Dataset is curated from three sources; however, age and gender data belong to Belgium, particularly. Visualizations, frequencies, Pearson’s and polyserial correlation, student’s t-test, and Cramer’s V are used for enhanced analysis. Results show higher mortality rate in males and need of more ventilators to combat severe symptoms.

The flavonoid silymarin (SMN) has been widely used in preclinical and clinical studies to treat various types of cancer, either alone or in combination with chemotherapy agents. Herein, we investigated the therapeutic efficacy of SMN and its combination with capecitabine (CAP) and irinotecan (IRI) in a mouse model of colon cancer. A modified diet supplemented with SMN (2500 ppm) with mono- and combined therapy of CAP and IRI were used following 1, 2 dimethylhydrazine (DMH)-induced colon cancer. The lipid profile, liver function tests, and cytokine levels were measured. Additionally, the lipid peroxidation and inflammation indices as well as the antioxidant activities were examined. Eventually, western blotting analysis for colonic BAX and Bcl-2 levels and histopathological examination of colon sections were carried out. SMN alone and in combination with the chemotherapeutic agents could attenuate the DMH-induced hyperlipidemia and elevated liver function enzyme levels. SMN supplementation with chemotherapy agents could also improve antioxidant activity and reverse the elevated levels of lipid peroxidation and inflammatory markers. Furthermore, significant upregulation of BAX and downregulation of Bcl-2 were observed. Besides, carcinogen-induced polyp multiplicity, dysplastic, and inflammatory changes were ameliorated considerably by treatment regimens. Our results showed that the potential anticancer properties of SMN could enhance the therapeutic effects of chemotherapy agents and reduce hepatotoxicity.

Striated muscle thick filaments are composed of myosin II and several non- myosin proteins which define the filament length and modify its function. Myosin II has a globular N-terminal motor domain comprising its catalytic and actin-binding activities and a long α-helical, coiled-coil tail that forms the dense filament backbone. Myosin alone polymerizes into filaments of irregular length, but striated muscle thick filaments have defined lengths that with the thin filament define the sarcomere structure. The motor domain structure and function are well understood but the myosin filament backbone is not. Here we report a structure of the flight muscle thick filaments from Drosophila melanogaster at 4.7 Å resolution which eliminates previous ambiguities in the non-myosin densities. The full proximal S2 region is resolved as are the connecting densities between the Ig domains of stretchin-klp. The proteins, flightin and myofilin are resolved in sufficient detail to build an atomic model based on an AlphaFold prediction. Our results suggest how flightin and myofilin cooperate to define the structure of the thick filament and explains a key myosin mutation that affects flightin incorporation. Drosophila is a genetic model organism for which our results can define strategies for functional testing.

Drought stress on soybean is a research-demanding matter for negative influence that agricultural drought brings about. This study was designated to evaluate the effect of drought stress on some gene expression in flowering and pod elongation stages in soybean. This experiment was carried out in split-plot format with RCBD design with four replicates. Drought stress as the main factor included three levels (irrigation after 50, 100, and 150 millimeters evaporation from the A-class evaporation pot) of which 50 millimeters evaporation is considered as control. The sub-factor included a factorial combination of 3 varieties (DPX, Sari and WE6) and two sampling stages (flowering and pod elongation). The gene expression analysis was carried out by using the QRT-PCR technique. According to our results, all genes have shown overexpression in drought stress despite this result was not the same for all genotypes and stress levels. Some genes have up-regulated in mediate stress (treatment 100) level (like as Gmdreb 2, Gmdreb 5, GmRD20A, GmaxACD2) and other genes up-regulated in serve stress (treatment 150) level. Between genotypes, DPX cultivar and WE6 line were better than of the sari cultivar for all genes up-regulated.

Background: pathophysiological changes like low cardiac output (LCO) impact pharmacokinetics, but its extent may be different throughout pediatrics compared to adults. Physiologically based pharmacokinetic (PBPK) modelling enables further exploration. Methods: A validated propofol model was used to simulate the impact of LCO on propofol clearance across age groups using the PBPK platform, Simcyp® (version 19). The hepatic and renal extraction ratio of propofol was then determined in all age groups. Subsequently, dose explorations were conducted under LCO conditions, targeting a 3 µg/mL (80-125%) propofol concentration range. Results: Both hepatic and renal extraction ratios increased from neonates, infants, children to adolescents and adults. The relative change in clearance following CO reductions increased with age, with the least impact of LCO in neonates. The predicted concentration remained within the 3 µg/mL (80-125%) range under normal CO and LCO (up to 30%) conditions in all age groups. When CO was reduced by 40-50%, a dose reduction of 15% is warranted in neonates, infants and children, 25% in adolescents and adults. Conclusions: PBPK driven, the impact of reduced CO on propofol clearance is predicted to be age-dependent, proportionally greater in adults. Consequently, age group specific dose reductions for propofol are required in LCO conditions.

Single-molecule magnets (SMMs) have garnered significant interest in the field of molecular magnetism due to their unique magnetic properties at the nanoscale. These molecular systems exhibit magnetisation behaviour reminiscent of conventional bulk magnets but with distinct advantages such as size-dependent properties and potential applications in quantum computing and high-density data storage. However, challenges remain in harnessing their properties for practical applications, including their susceptibility to degradation and limited control over their assembly and organisation.

Due to its built-up chemoresistance after prolonged usage, the demand for replacing platinum in metal-based drugs (MBD) is rising. The first MBD approved by the FDA for cancer therapy was cisplatin in 1978. Even after nearly four and a half decades of trials, there has been no significant improvement in osteosarcoma (OS) therapy. In fact, many MBD have been developed, but the chemoresistance problem raised by platinum remains unresolved. This motivates us to elucidate the possibilities of the copper and zinc (CuZn) combination to replace platinum in MBD. Thus, the anti-chemoresistance properties of CuZn and their physiological functions for OS therapy are highlighted. Herein, we summarise their chelators, main organic solvents, and ligand functions in their structures that are involved in anti-chemoresistance properties. Through this review, it is rational to discuss their ligands’ roles as biosensors in drug delivery systems. Hereafter, an in-depth understanding of their redox and photoactive function relationships is provided. The disadvantage is that the other functions of biosensors cannot be elaborated on here. As a result, this review is being developed, which is expected to intensify OS drugs with higher cure rates. Nonetheless, this advancement intends to solve the major chemoresistance obstacle towards clinical efficacy.

Smart city infrastructure has a significant impact on improving the quality of humans life. However, a substantial increase in the urban population from the last few years is posing challenges related to resource management, safety, and security. In order to ensure safe mobility and security in the smart city environment, this paper proposes a novel Artificial Intelligence (AI) based approach empowering the authorities to better visualize the threats and to help them identify the highly-reported crime zones yielding greater predictability of crime hot-spots in a smart city. To this end, it first investigates the Hierarchical Density-Based Spatial Clustering of Applications with Noise (HDBSCAN) to detect the hot-spots that have a higher risk of crimes to be committed. Second, for crime prediction, Seasonal Auto-Regressive Integrated Moving Average (SARIMA) exploited in each dense crime region to predict the number of crimes in the future with spatial and temporal information. The proposed HDBSCAN and SARIMA based crime prediction model is evaluated on ten years of crime data (2008-2017) for New York City (NYC). The accuracy of the model is measured by considering different time period scenarios i.e. (a) year-wise, i.e., for each year and (b) for the whole period of ten years, using an 80:20 ratio where 80\% data was used for training and 20\% data was used for testing. The proposed approach outperforms with an average Mean Absolute Error (MAE) of 11.47.

The study titled "Molecular Choreography of DNA: Insights and Innovations" explores the intricate dance of DNA, shedding light on its structure, function, and regulation. This comprehensive review delves into the historical significance of DNA research, from Watson and Crick's double helix discovery to recent innovations in genomics and molecular biology. The review highlights DNA's roles in replication, repair, gene regulation, and chromatin dynamics, emphasizing the precision and complexity of its molecular choreography. Innovations like CRISPR-Cas9 gene editing and advanced sequencing technologies have revolutionized our understanding of DNA, opening new avenues for scientific exploration. This study aims to provide readers with a deeper appreciation of DNA's central role in life's choreographed processes.

There has been no significant efficacy in treatment for osteosarcoma (OS) metastasis after nearly four decades of trials. This motivates us to elucidate OS therapies according to their four bidirectional mutation stages. To refresh the OS therapy status quo, the historical developments and clinical advancements are briefly described. However, the main issue of metastasis remains unresolved, accounting for 90% of pulmonary metastasis deaths. Thus, this metastasis problem is related to immune evasion and chemoresistance that are being induced after long-term treatment by the use of immunotherapy for tumorigenesis. Therefore, it is rationale to discuss the relationship cycles of mutation stages including tumorigenesis, metastasis, immune evasion, and chemoresistance. Even though many combinational and targeted therapies have been developed to intensify these mutation treatments, successful clinical translations with higher cure rates are still rare. Through this review, an in-depth understanding of the bidirectional relationship between the four OS mutation stages and their respective therapies is provided. Herein, we summarise the medicines used to treat tumorigenesis, including COLGALT2 inhibitors, Tra2B, and AGAP1, miR-148a and miR-21-5p EVs, and the lncRNA LIFR-AS1. Following the medicines used to treat metastasis are AXL, miR-135a-5p, mRNA BCL6, TGFβ1, Tim-3, SOCS5, CASC15, KLF3-AS1, PDCD4, ATG5, and Rab22a-NeoF1. Then the medicines used to treat immune evasion are N-cadherin, anti-IL-9, USP12 inhibitor, IgG-4+ B-cells, LAP inhibitor, anti-Wnt2 mAb, anti-αvβ8 integrin, HK2-mediated IκBα, IDO inhibitor with NO, and TGF-βRII with anti-IgG1. Finally, the medicines used to treat chemoresistance are DHFR, FPGS, HSP-90AA1, XCT-790, ATKI, and IGF1. As a result, this contribution is expected to serve as a reference and guide for scientists and clinicians.

This article will briefly review the progress of h-BN based solid-state metal semiconductor metal (MSM) neutron detectors. In the last decade, several groups have been working on hexagonal boron nitride (h-BN) based solid-state neutron detectors. Recently, the detection efficiency of 59% has been reported. Efficient, low-cost neutron detectors made from readily available materials are essential for various applications. Neutron detectors are widely used to detect fissile materials and nuclear power plants for security applications. The most common and widely used neutron detectors are 3He based, which are sometimes bulky, difficult to transport, have high absorption length, need relatively high bias voltage (>1000 V), and have low Q-value (0.764 MeV). Also, 3He is not readily available material. Thus, there is a strong need to find an alternative detection material. 10B isotope has a high neutron absorption cross-section, and it has been tested as a coating on the semiconducting materials. Due to the two-step process, neutron capture through 10B, and then electron-hole pair generation in a typical semiconducting material, the efficiency of these devices is not up to the mark. The progress in h-BN based detectors requires a review to envision the further improvement in this technology.

This paper evaluates the global sustainable competitiveness of three blocks of power (US, China and EU) based on OGT (Organic Growth Theory) structure. In addition, a sensitivity analysis of COVID-19 on three measures of global sustainable competitiveness, economy, environment and social is also presented. OGT is a well-thought-through and standard framework for evaluation of any type of organiza-tion in their pathway to experience truly sustainable growth. GDP (Gross Domestic Product) is used as an economic measure; total carbon emissions equivalent is used as an environmental measure and HMI (Human Development Index) as a social measure. It is concluded that the pandemic has paused the evolution of countries to be truly world centric countries. However, the recovery plans seem to be highly aligned with the OGT scores and it is expected that the scores to improve dramatically.

Innovation and technology are important tools of minerals sector efficiency and productivity im-provement. The uptake of technologies has proven important levelrs to improve the productivity of mining sector. This paper provides a comprehensive analysis of mine-level productivity by using a global data of copper, gold, and platinum from 1991-2020. Various drivers of proioductivity have been analysed to draw policy insights. Empirical findings reveal significant disparities in technical efficiency and productivity across mines and regions. A further decomposition of TFP into its different components suggest that the adoption of innovative practices and investment in technology adoption could improve the overall productivity of these commodities. The findings also suggest that an appropriate input mix and optimal scale of production could boost platinum mining productivity. Regional disparities in productivity in different commodities (e.g., South Africa vs. Zimbabwe) give policymakers with insights into how to support production scale and productivity through appropriate input mixtures.

The research aims to improve some of the physical and hydro-physical properties of some Vertisols in the southern region (part of the eastern Houran Plateau) in Sweda Governorate at the south of Syria. Using different quantities of volcanic ash, soil samples were collected from the Al-Thahallah village from a depth of (0-30) cm, The experiment was designed according to the complete random design with one factor that represents the ash quantity (1.25, 2.5, 5) %, with three replicates for each treatment in addition to the control treatment a0. The experiment was carried out within the plastic pots during agricultural season 2018/2019, in which the wheat of the Sham variety 3 were cultivated as a cover plant. The results showed that the addition of volcanic ash at the quantity of 5% led to a significant increase in the infiltration rate by (328.60) %,%, where the filtration rate increased from 0.42 cm/hr -1 to 1.80 cm.h-1, as well as for each of the air porosity by (89) % and the volume of infiltrate water by (40) %, compared with the control. The above-mentioned addition also resulted in a decrease in both dry bulk density, total soil porosity and volumetric swelling coefficient by (18.60, 5.80, 314) % Respectively, compared to the control. The addition also contributed to the reduce in the weighted moisture content when saturation and the field capacity, at the level of significance of 5%. The research recommends adding volcanic ash to the soil at a quantity of 5%, and adding enhancements with volcanic ash at various levels such as organic waste.

Machine Learning (ML) has brought about a transformative era in reactor operations, reshaping monitoring, control, and optimization strategies. This survey comprehensively explores the diverse spectrum of ML applications in industrial reactors. From real-time sensor analysis ensuring reactor functionality to adaptive control algorithms ensuring stability, ML's impact is profound and multifaceted. The benefits of ML are equally evident in optimization, encompassing performance trend prediction, proactive maintenance, and fine-tuning of operations for enhanced efficiency. This review identifies dominant ML techniques, operations stages receptive to ML integration, core data sources, and critical input-output parameters. Aimed at both academics and practitioners, this exploration enriches reactor technologies, unlocking their full potential through insights driven by ML.

The outbreak of coronavirus 2 (SARS-CoV-2) has already taken on pandemic proportions and has affected more than 100 countries in recent weeks. It is imperative that global healthcare systems are prepared. Containment initiatives in Jordan, on the other hand, have decreased new cases by over 63%. The Jordanian national health system has been very pleased with its ability to adequately meet the needs of the patients diagnosed with SARS-CoV-2 pneumonia, and includes intensive care. From 2 March to 14 April 2020, between 4% and 8% of active infected patients in Jordan registered daily in intensive care. The percentage is very low.

Nanofibres have gained increasing attention due to their advantages of having a high porous structure, narrow pore size and distribution, and a high specific surface area. One of the most efficient techniques for producing nanofibres is via electrospinning. Nanofibres are currently being used in various fields, including water filtration. Although nanofibres possess the ability to filter various components, the fibres generally have a low mechanical strength that can mitigate the performance over time. Therefore, in overcoming this issue, several studies have focused on improving the strength of the nanofibre membranes for a water filtration application. This review discusses the advantages and challenges of nanofibres for water filtration membranes and summarises the methods to increase the strength of the membranes, including solvent vapour, thermal treatment, and chemical crosslinking.

The epigenetic mechanism of DNA methylation is essential for regulating gene expression and adaptation in plants, especially when exposed to various environmental stressors such as drought, heat, and nutrient availability. The impact of these stressors can lead to alterations in DNA methylation patterns and gene expression, which this study aims to investigate. Specifically, we are interested in understanding how DNA methylation plays a role in controlling the expression of stress-response genes, as well as genes involved in plant growth and development. To accomplish this, we are analyzing the changes in DNA methylation patterns and gene expression in response to different stressors like drought and heat. Our research findings suggest that DNA methylation is a vital regulator of plant adaptation to environmental stress, and we hope to gain further insight into these mechanisms by identifying genes that exhibit differential expression in response to stress and analyzing their DNA methylation status. This study offers valuable insights into the development of crops that can thrive under changing climate conditions.

The peach industry faces serious economic losses because of the short “green” life of the fruit at postharvest. In the present study, we investigated the effects of putrescine (PUT) application on the quality characteristics, pattern of ripening, storage behavior, and shelf life of peach fruit during low-temperature storage. The aqueous solution of PUT (0, 1, 2, and 3 mM) was applied onto the peach trees at three distinctive stages of fruit growth and development. The fruit, harvested at the commercial stage of maturity, were stored at 1 ± 1 °C and 90 ± 2% relative humidity for 6 weeks. The data for fruit firmness, total soluble solids (SSC), titratable acidity (TA), ascorbic acid (AsA) content, rate of ethylene production, chilling injury (CI) index, and color perception were collected at harvest and then on a weekly basis throughout the storage period. The results showed that spray application of PUT significantly reduced the incidence of CI and reduced the rates of fruit softening, loss in fruit weight, SSC, TA, AsA content, and fading of skin color during storage, regardless of the doses of PUT applied or time of application. However, the positive effects on the quality characteristics of peach fruit, including CI, were more pronounced with the higher doses of PUT, specifically when applied at 2 mM. In conclusion, CI in peach fruit may be substantially alleviated by the spray application of 1–3 mM PUT during fruit growth without compromising the quality of the fruit for up to 6 weeks of low-temperature storage.

Current research in the field of antimicrobials is focused on the development of novel antibiotics and antimicrobial agents to counteract the huge dilemma that the human population is mainly facing in regards to the rise of bacterial resistance and biofilm infections. Host Defense peptides (HDPs) are a promising group of molecules for antimicrobial development as they share unique characteristics suitable for antimicrobial activity including their broad spectrum of activity and potency against bacteria. AamAP1 is a novel HDP that was identified through molecular cloning from the venom of the North African scorpion Androctonus amoeruxi. In vitro antimicrobial assays revealed that the peptide displays moderate activity against different strains of Gram-positive and Gram-negative bacteria. Additionally, the peptide proved to be highly hemolytic and displaying significantly high toxicity against mammalian cells. In our study, a novel synthetic peptide analogue named A3 was designed from the naturally occurring scorpion venom host defense peptide. The design strategy depended on modifying the amino acid sequence of the parent peptide in order to increase its net positive charge, percentage helicity and optimize other physico-chemical parameters involved theoretically in HDPs activity. Accordingly, A3 was evaluated for its in vitro antimicrobial and anti-biofilm activity individually and in combination with four different types of conventional antibiotics against clinical isolates of multi-drug resistant (MDR) Gram-positive bacteria. A3 was also evaluated for its cytotoxicity against mammalian cells. A3 displayed potent and selective in vitro antimicrobial activities against a wide range of MDR Gram-positive bacteria. Our results also showed that combining A3 with conventional antibiotics displayed a synergistic mode of action which resulted in decreasing the MIC value for A3 peptide as low as 0.125 µM. These effective concentrations were associated with negligible toxicities on mammalian cells. In conclusion, A3 exhibits enhanced activity and selectivity when compared with the parent natural scorpion venom peptide. The combination of A3 with conventional antibiotics may be pursued as a potential novel treatment strategy against MDR and biofilm forming bacteria.

This paper investigates an innovative photovoltaic cell configuration, denoted as “Au/CuSCN/RbGeI3/CdTe/ZnO/TiO2/FTO", using SCAPS-1D simulation. The research focuses on optimizing device performance by analyzing key components, including ZnO as the electron transport layer (ETL), RbGeI3 as the perovskite absorber layer, CuSCN as the hole transport layer (HTL), and CdTe as the active buffer layer. A comparison is made with the standard “Au/CuSCN/CH3NH3SnI3/CdTe/ZnO/TiO2/FTO" configuration under dark and illuminated conditions. Through an in-depth investigation involving temperature effects, generation rate analysis, RbGeI3 absorber layer thickness, Nd level, and interface defect levels, an optimized design for a unit area is achieved. The proposed solar cell demonstrates outstanding performance metrics, including an open circuit voltage (Voc) of 0.94V, a short circuit current density (Jsc) of 34.52mA/cm2, a fill factor (FF) of 77.77%, and an energy conversion efficiency (η) of 25.40%. These values significantly outperform the reference models with energy conversion efficiencies of 10.11% and 21.09%. Real-world applicability is validated by implementing these optimized characteristics in a photovoltaic system for Pakistan’s geographical location using PVSyst software. The suggested solar cell achieves a remarkable performance ratio (PR) of 85.6%, surpassing the PR of the reference basic solar cell model at 83%. The findings of this research offer a promising and superior solar cell design, incorporating innovative materials and optimization techniques to achieve exceptional energy conversion efficiency and overall performance. This study’s outcomes have the potential to advance photovoltaic technology and contribute to sustainable energy solutions worldwide.

Solid-state transformer (SST) is a promising technology for smart grids due to its flexible power control (better reliability) and high efficacy (by decreasing losses) compared with traditional transformers. The SST is designed in tandem with three stages, i.e., the input, isolation, and output stages. As three converter stages are used to design the SST to make a more reliable device in practice, it is highly prone to instabilities. Moreover, the key objective of SST design is to implement a modern power distribution system to make it more intelligent and reliable. The stability issue can be even more complicated by the presence of distributed energy resources in the distribution system. Thus, the stability of SST must be measured prior to /during the design, and to determine, a state-space model is used, which is developed in this paper. Each stage of SST is modeled with its controller, and the system's stability is measured through the controllability and observability test. Further, the conversion from state-space to transfer function model is done, and the stability of SST is shown using frequency and time-domain diagrams. With these, the different plots, namely, the Bode plot, Nyquist plot, Nichols chart, Root locus, pole-zero plot, and Eigen plot, are used to ascertain the relative and absolute stability. Finally, the SST Simulink model is tested and validated through hardwate-in-the-loop simulation, i.e., OPALRT, to show its effectiveness and applicability.

Silybum marianum (L.) Gaertn is a rich source of antioxidants and anti-inflammatory flavonolignans with great potential for use in pharmaceutical and cosmetic products. Its biotechnological production using in vitro culture system has been proposed. Chitosan is a well-known elicitor that strongly affects both secondary metabolites and biomass production by plants. The effect of chitosan on S. marianum cell suspension is not known yet. In the present study, suspension cultures of S marianum were exploited for their in vitro potency to produce bioactive flavonolignans in the presence of chitosan. Established cell suspension culture was maintained on the same hormonal media supplemented with 0.5 mg/L BAP (6-benzylaminopurine) and 1.0 mg/L NAA (α-naphthalene acetic acid) under photoperiod 16/8 h (light/dark) and exposed to various treatments of chitosan (ranging from 0.5 to 50.0 mg/L). The highest biomass production was observed for cell suspension treated with 5.0 mg/L chitosan, resulting in 123.3 g/L fresh weight (FW) and 17.7 g/L dry weight (DW) productions. Chitosan treatment resulted in an overall increase in the accumulation of flavonoids, phenolic compounds and silymarin. High accumulation levels of silybin B, silydianin and silybin A were recorded by HPLC analysis. The corresponding extracts displayed interesting antioxidant and anti-inflammatory capacities. In particular, high ABTS antioxidant activity (741.5 μM Trolox C equivalent antioxidant capacity) was recorded in extracts obtained in presence of 0.5 mg/L of chitosan. On the opposite, highest inhibitions of cyclooxygenase 2 (COX-2, 30.5 %), secretory phospholipase A2 (sPLA2, 33.9 %) and 15-lipoxygenase (15-LOX-2, 31.6 %) enzymes involved in inflammation process were measured in extracts obtained in presence of 5.0 mg/L of chitosan. Taken together, these results highlight the high potential of the chitosan elicitation of the S. marianum cell suspension for enhanced production of antioxidant and anti-inflammatory silymarin-rich extracts.

This study examines the moderating effect of trained human capital on the associations of accounting information systems, generalized auditing software, and technology adoption with the performance of external auditors among Saudi listed companies. This study used a survey-based methodology. The final sample consisted of 136 responses with an 8% response rate. Using Smart-PL4 analysis, the results showed that there is a positive correlation between accounting information systems and external auditors. Conversely, a negative relationship between generalized auditing software and external auditors has been documented. In addition, this study reported a negative association between technology adoption and external auditors. However, the results highlight the positive relationship between trained human capital and external auditors. Overall, this study provides valuable insights for accounting and auditing policymakers on how external auditors’ performance is influenced by several factors in the Saudi audit market.

Lifestyle physical activity (PA) and nutrition are known to be effective interventions in preventing and managing obesity related comorbidities is adult populations, but less so in children and adolescents. We examined the effectiveness of lifestyle interventions in children from minority ethnic populations in western high-income countries. Our systematic review included 53 studies involving 26045 children from minority ethnic populations within western countries, who followed lifestyle intervention programs lasting between 8 weeks and 5 years with an aim to prevent and/or manage childhood obesity and associated comorbidities, including adiposity and cardiometabolic risks. Studies were heterogenous in terms of lifestyle intervention components (nutrition, PA, behavioural counselling) and settings (community vs. schools and after schools). Our meta-analysis included 31 eligible studies and showed no significant effects of lifestyle interventions when they focused on body weight and body mass index (BMI) outcomes [pooled BMI mean change = -0.09 (95% CI -0.19, 0.01), p=0.09]. This was irrespective of the intervention program duration (< 6 months vs. ≥ 6 months), type (PA vs nutrition/combined intervention) and weight status (overweight or obese vs no normal weight), all showed no significant effects in the sensitivity analysis. Nonetheless, 19 of the 53 studies reported reduction in BMI, BMI z scores and body fat percentage. However, majority of lifestyle interventions adopting a quasi-design with a combined primary and secondary obesity measures (11 out of 15 studies), were effective in reducing obesity comorbidities of cardiometabolic risks including metabolic syndrome, insulin sensitivity, and blood pressure in children with overweight and obesity. Preventing childhood obesity and associated comorbidities in children from high-risk ethnic minority groups is best achieved using a combined PA and nutrition intervention approach, which jointly target preventing obesity and cardiometabolic disease primary and secondary outcomes, especially measures of diabetes, hypertension, and cardiovascular disease.

In the context of Shared Autonomous Vehicles, the need to monitor the environment inside the car will be crucial. This article focuses on the application of deep learning algorithms to detect objects, namely lost/forgotten items to inform the passengers, and aggressive items to monitoring if violent actions may arise between passengers. For object detection algorithms was used public datasets (COCO and TAO) to train state-of-the-art algorithms, such as YOLOv5. For violent action detection was used the MoLa InCar dataset to train on state-of-the-art algorithms such as I3D, R(2+1)D, SlowFast, TSN and TSM. At the end an embedded automotive solution was used to demonstrate both methods running in real-time.

Nowadays, brain signal processing is performed rapidly in various brain-computer interface (BCI) applications. Most researchers focus on developing new methods for the future or improving the basic implemented models to identify the optimum standalone feature set. Our research focuses on four ideas. One of them introduces future communication models, and the others are for improving old models or methods. These are: 1) new communication imagery model instead of speech imager using the mental task: Due to speech imagery is very difficult, and it is impossible to imagine sound for all of the characters in all of the languages. Our research introduces a new mental task model for all languages that call Lip-sync imagery. This model can use for all characters in all languages. This paper implemented two lip-sync for two sounds, characters or letters. 2) New combination Signals: Selecting an inopportune frequency domain can lead to inefficient feature extraction. Therefore, domain selection is so important for processing. This combination of limited frequency ranges proposes a preliminary for creating Fragmentary Continuous frequency. For the first model, two s intervals of 4 Hz as filter banks were examined and tested. The primary purpose is to identify the combination of filter banks with 4Hz (scale of each filter bank) from the 4Hz to 40Hz frequency domain as new combination signals (8Hz) to obtain well and efficient features using increasing distinctive patterns and decreasing similar patterns of brain activities.3) new supplement bond graph classifier for SVM classifier: When SVM linear uses in very noisy, the performance is decreased. But we introduce a new bond graph linear classifier to supplement SVM linear in noisy data. 4) a deep formula recognition model: it converts the data of the first layer into a formula model (formula extraction model). The main goal is to reduce the noise in the subsequent layers for the coefficients of the formulas. The output of the last layer is the coefficients selected by different functions in different layers. Finally, the classifier extracts the root interval of the formulas, and the diagnosis does based on the root interval. For all of the ideas achieved the results of implementing methods. The results are between 55% to 98%. Less result is 55% for the deep detection formula, and the highest result is 98% for new combination signals.

This paper addresses the conceptual exploration of various issues that form an integral part of the ethical dimensions surrounding the use of artificial intelligence (AI) in the field of marketing. We critically review some of the main ethical challenges AI poses to humanity: privacy, data security, bias, transparency, and accountability. Therefore, we will discuss the delicate balance between exploiting the transformation potential of AI for personally designed marketing strategies and ethical imperatives to safeguard the rights of consumers to retain trust. Then, the present regulatory landscape responding to these ethical challenges will be assessed by building on effective regulation, like the GDPR, existing proposed legislative frameworks, and industry guidelines. To underscore the role of an ongoing dialogue between marketers, technologists, ethicists, and regulators for developing a responsible AI ecosystem in marketing. Further, strategic recommendations for implementing company-based ethical AI marketing practices. The further strong guidelines provide enhancement transparency to consumers and investment in research to remove biases from algorithms. It also underscores principal scopes of further research and development, focusing on the need for new-age solutions to guide the ethical quagmires that AI-led marketing throws up. We suggest that integration should be done proactively and collaboratively. Thus, if attention is paid more to ethics and multidisciplinary dialogue, only such hyperbolic promises can be realized by AI-driven marketing. There are such promises through which AI-driven marketing will meet business goals and be huge at societies' values.

The concerning rise in emergence and prevalence of resistant strains to drugs of M. tuberculosis has ,the prompted researchers to look for new and effective treatments. With this motive, biscoumarins were identified as the lead molecules on a whole-cell-based screening of several less explored low molecular weight bioactive compounds against M. tuberculosis strains. Among the screened biscoumarins, the highest dock score derivatives were synthesized (a-h) using a programmable microwave synthesizer for better yields and reaction control. The synthesized derivatives were evaluated against H37Rv, H37Ra, M. smegmatis, an MDR surrogate model, and other bacterial strains for the structure-activity response. Assessment of the synthesized library against mycobacterial strains led to the identification of compounds (f and d) as lead anti-tuberculosis agents. Compounds (f and d) exhibited less toxicity against human cell lines. At the same time, it displayed enjoyable activity wherein MIC concentrations were observed to be 16- and 32 µg/mL against the susceptible H37Rv, and H37Ra strains of M. tuberculosis and MIC value of 128 µg/mL for M. smegmatis, respectively. For mechanistic insights and identification of drug binding targets, molecular docking and dynamic simulations were employed for a panel of 16 mycobacterial enzymes essential for mycobacterial growth and survival. These in silico studies revealed the DprE1 enzyme as a druggable target for the anti-tuberculosis activity of the selected biscoumarins derivatives. Further investigation is underway in our laboratory, leading to its development as an anti-tuberculosis drug (animal model studies).

In this work, a highly efficient, molybdenum disulfide (MoS2) based near infrared (NIR) heterojunction photodetector is fabricated on a Si substrate using a cost-effective and simple drop casting method. A non-stoichiometric and inhomogeneous MoS2 layer with a S/Mo ratio of 2.02 is detected using energy dispersive X-ray spectroscopy and field emission scanning electron microscope analysis. Raman shifts are noticed at 382.42 cm-1 and 407.97 cm-1, validating MoS2 thin film growth with a direct bandgap of 2.01 eV. The fabricated n-MoS2/p-Si photodetector is illuminated with a 785 nm laser at different intensities, and demonstrate the ability of the photodetector to work in both regions, the forward biased and reverse biased from above 1.5 V and less than -1.0 V. The highest responsivity, R is calculated to be 0.52 A/W while the detectivity D* is 4.08 x 10^10 Jones for an incident light intensity of 9.57 mW/cm2. The minimum rise and fall times are calculated as 1.77 ms and 1.31 ms for an incident laser power of 9.57 mW/cm^2 and 6.99 mW/cm^2 respectively at a direct current bias voltage of 10 V. The demonstrated results are promising for the low-cost fabrication of a thin MoS2 film for photonics and optoelectronic device applications.

Image registration (IR) is a process that deforms images to align them with respect to a reference space, making it easier for medical practitioners to examine various medical images in a standardized reference frame, such as having the same rotation and scale. This document introduces image registration using a simple numeric example. It provides a definition of image registration along with a space-oriented symbolic representation. This review covers various aspects of image transformations, including affine, deformable, invertible, and bidirectional transformations, as well as medical image registration algorithms such as Voxelmorph, Demons, SyN, Iterative Closest Point, and SynthMorph. It also explores atlas-based registration and multistage image registration techniques, including coarse-fine and pyramid approaches. Furthermore, this survey paper discusses medical image registration taxonomies, datasets, evaluation measures, such as correlation-based metrics, segmentation-based metrics, processing time, and model size. It also explores applications in image-guided surgery, motion tracking, and tumor diagnosis. Finally, the document addresses future research directions, including the further development of transformers.

Nowadays, speed up development and use of digital devices such as smartphones have put people at risk of internet crimes. The evidence of present crimes in a computer file can be easily unreachable by changing the prefix of a file or other algorithms. In more complex cases, either file divided into different parts or the parts of a file that has information about the file type are deleted, where the file fragment recognition issue is discussed. The known files are divided into different fragments, and different classification algorithms to solve the problems of file fragment recognition. A confusion matrix measures the accuracy of type recognition. In the present study, first, the file is divided into different fragments. Then, the file fragment features, which are obtained from Binary Frequency Distribution (BFD), are reduced by 2 feature reduction algorithms; Sequential Forward Selection algorithm (SFS) as well as Sequential Floating Forward Selection algorithm (SFFS) to delete sparse features that result in increased accuracy and speed. Finally, the reduced features are given to 3 classifier algorithms, Multilayer Perceptron (MLP), Support Vector Machines (SVM), and K-Nearest Neighbor (KNN) for classification and comparison of the results. In this paper, we proposed the algorithm of file type recognition that can recognize 6 types of useful files ( pdf, txt, jpg, doc, html, exe), which may distinguish a type of file fragments with higher accuracy than the similar works done.

Use of rhizosphere microorganisms provides an alternative or supplement to conventional plant breeding to improve water deficit tolerance of tomato plants. Experiment was carried out to explore the effect of two microbial species, AMF (Rhizophagus irregularis) and Bacillus subtilis, in single and co-application, on growth, colonization, and molecular aspects of tomato plants under drought stress. Co-inoculated plants showed less reduction in growth traits, photosynthetic pigments, colonization rate, and increased compatible solutes like proline which help in sustaining relative water content than non-inoculated plants. Inoculation considerably enhanced proline dehydrogenase activity, and significantly reduced both Δ1-pyrroline-5-carboxylate reductase Δ1-pyrroline-5-carboxylate synthetase activity causing lower proline accumulation in inoculated plants under drought stress. Co-inoculated plants showed obvious upregulation of antioxidant system, thus facilitating amelioration of oxidative stress through exclusion of reactive oxygen species. No inoculation under drought stress upregulated abscisic acid related genes expression but have no effect in plants inoculated either sole or mixed inoculation. Expression of aquaporin genes was upregulated in plants co-inoculated and with AMF alone under normal condition. However the expression of aquaporin genes were decreased or unaffected in plants inoculated with Bacillus subtilis but increased in non-inoculated plants. Co-applied AMF and bacillus subtilis substantially increase drought tolerance by upregulating proline metabolism, antioxidant enzymes and aquaporin genes. Therefore our results suggest that co-inoculation mediated drought tolerance is linked with increased proline accumulation, enhanced antioxidant enzyme activities and differential regulation of ABA biosynthetic and aquaporin genes, which is vital for osmotic adjustment of host plant.

The modulation of Nrf2 activity has been reported to be implicated in the pathology of various neurological disorders, including epilepsy. Previous studies have demonstrated that Nrf2 is activated in the post-status epilepticus rat model, however, the spatio-temporal, as well as cell type-specific expression of Nrf2 following brief epileptic seizures remains unclear. Here, we evaluated how an acute epileptic seizure affected the expression of Nrf2 and its downstream genes in the cortex and the hippocampus up to 1-week following the induced seizure. We found that after a pentylenetetrazol-induced seizure, Nrf2 significantly increased at 24 h at the mRNA level and 3 to 6 h at the protein level in the cortex. In the hippocampus, the Nrf2 mRNA level peaked at 3 h after the seizure, and no significant changes were observed in the protein level. Interestingly, the mRNA level of Nrf2 downstream genes peaked at 3-6 h after seizure in both the cortex and the hippocampus. A significant increase in the expression of Nrf2 was observed in the neuronal population of CA1 and CA3 regions of the hippocampus, as well as in the cortex. Moreover, we observed no change in the co-localization of Nrf2 with astrocytes neither in the cortex nor in CA1 and CA3. Our results revealed that following a brief acute epileptic seizure, the expression of Nrf2 and its downstream genes is transiently increased and peaked at early timepoints after seizure predominantly in the hippocampus, and this expression is restricted to the neuronal population.

Superficial mycoses, encompassing a range of fungal infections affecting the outer layers of the skin, hair, and nails, have become increasingly prevalent in recent years. While these infections are generally non-life-threatening, the emergence of antifungal resistance poses a growing threat to effective treatment strategies. In this article we explore the escalating specter of antifungal resistance in superficial mycoses, focusing on the underlying mechanisms driving resistance, the clinical implications, and potential avenues for mitigation. The rise of antifungal resistance in superficial mycoses is multifactorial. Consequently, the efficacy of conventional treatments is diminishing, leading to persistent or recurrent infections. Understanding the molecular mechanisms underlying antifungal resistance is crucial for developing targeted therapeutic approaches. Research efforts aimed at unraveling these mechanisms are essential for identifying new drug targets and designing innovative treatment strategies to combat resistant strains. In response to the escalating threat of antifungal resistance, a multifaceted approach is required. This includes enhanced surveillance of antifungal susceptibility patterns, the development of novel antifungal agents, and the implementation of stringent guidelines for antifungal use. Additionally, educational initiatives targeting healthcare professionals and the public are essential to promote responsible antifungal use, reduce the risk of resistance emergence, and improve treatment outcomes.

Fungal pathogens pose a major threat to food production worldwide. Traditionally, chemical fungicides have been the primary means of controlling these pathogens, but many of these fungicides have recently come under increased scrutiny due to their negative effects on the health of humans, animals, and the environment. However, the use of fungicides with less of an environmental impact tends to result in the development of resistance in populations of phytopathogenic fungi. Therefore, new environmentally friendly alternatives that provide adequate levels of disease control are needed to replace chemical fungicides—if not completely, at least partially. A number of alternatives to conventional chemical fungicides have been developed, including plant defence elicitors (PDEs), biological control agents (fungi, bacteria and mycoviruses), biofungicides, RNA interference (RNAi) methods, and resistance breeding. This article reviews the conventional and alternative methods available to manage fungal pathogens, discusses their strengths and weaknesses, and identifies potential areas for future research.

The Saudi government has undertaken rapid and swift actions, such as suspending Omrah and holding international flights. Such affirmative actions enhanced citizens and residents’ confidence in the government officials’ ability to fight the pandemic. However, there are more than 361,178 reported cases of Covid-19 with 6131 deaths as of December 22, 202. As nurses are the largest component of the health care workforce in Saudi Arabia, it is important that they are trained and have the skills and resources to adapt, whether on the frontline of a crisis or in a clinical environment. Nurses play a key function in fulfilling the needs of medical treatment by being the most important part of the health care delivery system.

The copper deposition on the platinum and palladium nanoelectrode has been studied using cyclic voltammetry. The use of nanoelectrode platinum and palladium are defined in the study of heavy metals. The noble nanoelectrode of metal has a typical silicone processing structure. In comparison to the nanoelectrodes, the geometry of the electrode series is complex and balanced. Nanoelectrodes of platinum are found effective in detecting heavy metal. There was regular analysis of the use of the sensors. The identification constraints down to the ng /L level was accomplished by refined electrode geometry and the stripping procedures. The process was used for the study of water sample determination. Another heavy metal ion attack voltammetric reaction was studied. The SEM picture clearly observed and characterized the nanoparticle electrode by X-ray diffraction and cyclic voltammetry.

Polyaniline or PANI is a conductive polymer (CPs) with flexibility in turning into conducting properties. The drawback is mainly in terms of limited mechanical properties improvement which attracted the interest in fabrication of PANI with other polymeric materials. PANI-PVL composites film was synthesized and fabricated in this work with chronological steps according to the objectives aligned in two different phases. The first phase determines the optimum parameters to synthesize nanosized PANI. The ideal initial molar ratio, r was 1, stirring speed of 600 rpm, purified by filtration, synthesis temperature of 25 oC, washed by dopant acid, acetone and distilled water. The usage of non-ionic surfactant, Triton X-100 (TX100) with 0.1 % concentration favours the formation of smaller particle size of PANI and good dispersibility compared to the usage of anionic sodium dodecyl sulphate (SDS). The synthesis of PANI in nanosized dimension has the potential to be applied for antimicrobial applications such as gloves and antimicrobial coating of frequent contact points in the near future.

The Kashmir valley is prone to flooding due to its peculiar geomorphic setup compounded by the rapid anthropogenic land system changes and climate change. The study assesses the impact of land use and land cover (LULC) changes between 1980 and 2020 and extreme rainfall on peak discharge and sediment yield in the Upper Jhelum Basin (UJB), Kashmir Himalaya, India using KINEROS2 model. Analysis of LULC change revealed a notable shift from natural LULC to more intensive human-modified LULC, including a decrease in vegetative cover, deforestation, urbanization, and improper farming practices. The findings revealed a strong influence of the LULC changes on peak discharge, and sediment yield relative to the 2014 timeframe, which coincided with the catastrophic September 2014 flood event. The model predicted a peak discharge of 115101 cubic feet per second (cfs) and a sediment yield of 56.59 tons/ha during the September 2014 flooding, which is very close to the observed peak discharge of 115218 cfs indicating that the model is reliable for discharge prediction. The model predicted a peak discharge of 98965 cfs and a sediment yield of 49.11 tons/ha in 1980, which increased to 118366 cfs and, 58.92 tons/ha respectively in 2020, showing an increase in basin’s flood risk over time. In the future, it is anticipated that the ongoing LULC changes will make flood vulnerability worse, which could lead to another major flooding in the event of an extreme rainfall as predicted under climate change and, in turn compromise achievement of sustainable development goals (SDG). Therefore, regulating LULC in order to modulate various hydrological and land surface processes would ensure stability of runoff and reduction in sediment yield in the UJB, which is critical for achieving many SDGs.

The four solvent extractives obtained from aerial parts of Leucophyllum frutescens were evaluated for their Total Antioxidant Activity (TAA) by ammonium molybdate method, scavenging potential by 2,2-diphenyl-1-picrylhydrazyl (DPPH) and Trolox-Equivalent Antioxidant Capacity (TEAC) assays, metal-reducing potential by Cupric Reducing Antioxidant Capacity (CUPRAC) and Ferric Reducing Antioxidant Power (FRAP) assays, Total Phenolic Content (TPC), Total Flavonoid Content (TFC) and their biological activities. The study concluded that BULE exhibited total antioxidant activity (226.235±1.222 mg AA.Eq.gm-1 DE±S.D) by molybdate method, CHLE exhibited more scavenging potential (DPPH 209.589±8.500 mg trolox Eq.gm-1 DE±S.D and TEAC 210.166±7.954 mg trolox Eq.gm-1 DE±S.D) and reducing potential (CUPRAC 646.889±16.889 mg trolox Eq.gm-1 DE±S.D & FRAP 472.981±15.625 mg trolox Eq.gm-1 DE±S.D). Phytochemical quantification concluded high TPC by BULE (189.369±1.393 mg GA.Eq.gm-1 DE±S.D) and high TFC by CHLE (232.458±1.589 mg Qu.Eq.gm-1 DE±S.D). Strong inhibition of α-glucosidase and urease enzymes was observed by HELE (IC50 0.3321±0.007 mg.ml-1±SD) and BULE (IC50 4.09±0.357 mg.ml-1±SD) extractives, respectively. The hemolytic effect shown by hexane extract (HELE) was higher with HA50 25.545±0.927 ug.ml-1±SD whereas methanol (MELE), chloroform (CHLE), and butanol (BULE) exhibited hemolytic effects at higher concentration with HA50 400.067±1.364, 321.394±1.332, and 332.957±0.465 µg.ml-1±SD, respectively. GC-MS profiling of HELE of L. frutescens was performed for qualitative analysis. The principal phytochemicals tentatively identified by GC-MS analysis of HELE accounts for fatty acids (60.221%), lignans (17.687%), ketones (3.358%), phenols (2.584%), sesquiterpenes (1.265%), and aldehydes (0.345%).

The objective of this study is to examine different types of bias present in assessment tools and techniques, identify and eliminate any forms of favoritism, and suggest effective approaches for advancing equity and objectivity in assessment procedures. The research utilizes a qualitative methodology, incorporating surveys and focus group discussions with educators and students to collect data. Thematic analysis is a method employed for the purpose of analyzing qualitative data. The results suggest that students hailing from diverse cultural backgrounds perceive partiality in the language and cultural context of evaluations, leading to diminished scores. According to academic professionals, standardized tests are subject to bias, and offering accommodations that cater to linguistic and cultural diversity may improve the academic achievement of students from diverse cultural backgrounds. The findings of this research are of great importance to professionals in the domains of education, policy development, and academia who seek to improve assessment practices and promote equitable educational opportunities for all learners.

The graphene based highly conductive and flexible devices has received momentous attraction and growth in recent years for potential multifunctional uses. The development of flexible and washable textile sensors, actuators, energy storage and energy harvesting systems. Textile fabrics coated with graphene and conductive polymers have been used for wearable self-powered e-textiles, such as tribo-electric, piezoelectric, and Thermoelectric. Herein this research, 100% woven cotton fabric is Fictionalized with graphene oxide (GO) using industrial-scale cold pad batch dyeing technique for the development of low-grade body heat into self-powered wearable e-textiles. The conductive polymer PEDOT: PSS was coated using layer by layer approach. The study demonstrates that the resultant textile electrodes showed reduced electrical sheet resistance from 2.5 MΩ to 15KΩ, with a reduced graphene oxide and further reduced to (2.5 -12.5 Ω) for conductive polymer. The sheet resistance was decreased with the number of dyeing cycles (10-15) and increased with 20 washing cycles vice versa. The study demonstrates that the sensor response and performance were improved with increasing the content percent of rGO and PEDOT: PSS. The tensile strength of as coated fabric electrodes was improved from (25.0-85.5 mPa) and fabric thickness was increased to (26-38µm) without compromising or influencing the air permeability. The resultant textile electrodes may potentially be used in smart textiles for self-powered flexible wearable generators, sensors, and energy storage. The study demonstrates that the cold pad batch dyeing method is a suitable and effective method for the fabrication of graphene-based textiles.

We report the synthesis and characterization of Poly Methyl-Meth-Acrylate (PMMA)/Poly vinylalcohol (PVA) polymeric blend doped with different concentrations of Copper oxide (CuO) nanoparticles (NPs). The (PMMA-PVA)/CuO nanocomposite hybrid thin films (wt. % = 0%, 2%, 4%, 8%, and 16%) of CuO NPs are deposited on glass substrates via dip-coating technique. The transmittance (T%), reflectance (R%), the absorption coefficient (α), the optical constants [refractive index (n), extinction coefficient (k)], optical dielectric functions [ɛ',ɛ''] are investigated and interpreted. Tauc, Urbach, Spitzer-Fan, and Drude models are employed to calculate the optical bandgap energy (Eg) and the optoelectronic parameters of the nanocomposite thin films. The refractive index and optical bandgap energy of of (PMMA-PVA) polymeric thin film are found to be (1.5 to 1.85) and 4.101 eV, respectively. Incorporation of specific concentrations of CuO-NPs in (PMMA-PVA) polymeric thin films leads to a noticeable decrease in the optical bandgap energy and to an increase of the refractive index. Moreover, Fourier Transform Infrared Spectroscopy (FTIR) transmittance spectra are measured and analyzed for undoped and doped polymeric thin films to pinpoint the major vibrational modes in the spectral range (500 and 4000 cm-1), as well as, the nature of network bonding in both systems. Thermal stability of thin films is investigated by performing thermogravimetric analysis (TGA). The TGA thermograms confirm that both doped polymeric thin films are thermally stable at temperatures below 110°C which enables them to be attractive for a wide range of optical and optoelectronic applications. Our results indicate that optical, vibrational and thermal properties of both polymeric thin films can be tuned for specific applications by the appropriate corporation of particular concentrations of CuO-NPs.

Silybum marianum L. is a well-known medicinal herb, primarily used in liver protection. Light strongly affects several physiological processes along with secondary metabolites biosynthesis in plants. Herein, S. marianum was exploited for in vitro potential under different light regimes in the presence of melatonin. The optimum callogenic response occurred in combination of 1.0 mg/L α-naphthalene acetic acid and 0.5 mg/L 6-Benzylaminopurine under photoperiod. Continuous light associated with melatonin treatment increased total flavonoid content (TFC), total phenolic content (TPC) and antioxidant potential, followed by photoperiod and dark treatments. The increased level of melatonin has a synergistic effect on biomass accumulation under continuous light and photoperiod, while adverse effect was observed under dark condition. More detailed phytochemical analysis showed maximum total silymarin content (11.92 mg/g DW) when placed under continuous light + 1.0 mg/L melatonin. Individually, the level of silybins (A and B), silydianin, isolsilychristin and silychristin was found highest under continuous light. Anti-inflammatory activities were also studied and highest percent inhibition was recorded against 15-LOX for cultures cultivated under continuous light (42.33%). The current study helps to better understand the influence of melatonin and different light regimes on silymarin production as well as antioxidant and anti-inflammatory activities in S. marianum callus extracts.

Clustered regularly interspaced short palindromic repeats or CRISPR, one of the major technological tools from nature's toolbox, has revolutionized the scientific world with its potential use in humans and plants. CRISPR Cas9 was first known as an adaptive immune system of bacteria. It is a system that cleaves foreign DNA. It has been exploited to be used as a genome editing tool for correcting genetic diseases in humans, for plants to create stress-resistant plants, and for a variety of different purposes. This review provides a basic overview of its applications in different areas of biological research. It has immense potential for a variety of researches, but it's still a mystery for science. It feels like scientists just know a tip of an iceberg.

An increasing global aridification due to climate change has made the health monitoring of vegetation indispensable to maintaining the food supply chain. Cost-effective and smart irrigation systems are required not only to ensure the efficient distribution of water, but also to track the moisture of plant leaves, which is an important marker of the overall health of the plant. This paper presents a novel electromagnetic method to monitor the water content (WC) and characterization in plant leaves utilizing the absorption spectra of water molecules in the terahertz (THz) frequency for four consecutive days. We extracted the material properties of leaves of eight types of pot herbs from the scattering parameters, measured using a material characterization kit in the frequency range of 0.75 to 1.1 THz. From the computed permittivity, it is deduced that the leaf specimens increasingly become transparent to the THz waves as they dry out with the passage of days. Moreover, the loss in weight and thickness of leaves were observed due to the natural evaporation of leaf moisture cells and change occurred in the morphology of fresh and water-stressed leaves. It is also illustrated that loss observed in WC on day 1 was in the range of 5\% to 22\%, and increased from 83.12\% to 99.33\% on day 4. Furthermore, we observed an exponential decaying trend in the peaks of the real part of the permittivity from day 1 to 4, which was reminiscent of the trend observed in the weight of all leaves. Thus, results in paper demonstrated that timely detection of water stress in leaves can help to take proactive action in relation to plants health monitoring, and for precision agriculture applications, which is of high importance to improve the overall productivity.

The Coronavirus disease due to SARS-CoV-2 emerged in Wuhan city, China in December 2019 and rapidly spread more than 200 countries as a global health pandemic. There are more 3 million confirmed cases and around 207,000 fatalities. The primary manifestation is respiratory and cardiac but neurological manifestations are being reported in the literature as case reports and case series. The most common reported symptoms to include headache and dizziness followed by encephalopathy and delirium. Among the complications noted are Cerebrovascular accident, Guillian barre syndrome, acute transverse myelitis, and acute encephalitis. The most common peripheral manifestation was hyposmia. It is further noted that sometimes the neurological manifestations can precede the typical features like fever and cough and later on typical manifestations develop in these patients. Hence a high index of suspicion is required for timely diagnosis and isolation of cases to prevent the spread in neurology wards. We present a narrative review of the neurological manifestations and complications of COVID-19. Our aim is to update the neurologists and physicians working with suspected cases of COVID-19 about the possible neurological presentations and the probable neurological complications resulting from this novel virus infection.

Noncoding RNA regions have emerged as pivotal players in the regulation of various cellular processes, and their involvement in HIV/AIDS pathogenesis is an evolving field of research. This review article delves into the intricate interplay between noncoding RNA regions and AIDS, shedding light on the diverse mechanisms by which these RNA molecules influence viral replication, immune responses, and disease progression. The review highlights recent discoveries, potential therapeutic applications, and the challenges ahead, illustrating the promising prospects of noncoding RNA research in the context of HIV/AIDS.

Non-coding RNA regions have long been considered the "dark matter" of the genome, with their significance in gene regulation remaining enigmatic. However, recent advances in genomics and molecular biology have illuminated the pivotal role that non-coding RNA regions play in the fine-tuned orchestration of hemoglobin expression. Hemoglobin, the oxygen-carrying protein vital for life, is tightly regulated, and any disruption in its production can lead to severe medical conditions, such as hemoglobinopathies. This review delves into the intricate world of non-coding RNA regions, exploring how they act as master conductors in controlling hemoglobin gene expression. We will discuss various classes of non-coding RNAs, including long non-coding RNAs, microRNAs, and circular RNAs, and their specific mechanisms in fine-tuning hemoglobin levels. Additionally, we will highlight emerging therapeutic approaches that target non-coding RNA regions to ameliorate hemoglobin-related disorders. Understanding the critical role of non-coding RNA regions in hemoglobin regulation opens new avenues for precision medicine and gene therapies, offering hope for those affected by hemoglobinopathies and related conditions. This comprehensive review sheds light on the significance of these non-coding RNA regions, demonstrating that the "silent" players in the genome are, in fact, the conductors of harmony in the symphony of hemoglobin regulation.

This study explores the potential of Eisenia fetida (Savigny) in vermicompost production within vermipits during winter months in the Rampur region of Uttar Pradesh, India. The vermipits were inoculated with 0.33 kg of E. fetida per pit, against the recommended rate of inoculation for assessment of real-time potential of earthworm on seasonal and regional grounds. The results revealed a significant increase in earthworm population, with three times production (4.1 kg) of the inoculated number (1.0 kg). The productivity dynamics of compost vs E. feida revealed a notable threefold and fourfold effectiveness, respectively. This dual advantage signifies the success of composting process, with the increased worm population indicating enhanced decomposition. The study attributes the combination of regional and edaphic factors viz., sandy loam soil with high humus content and good water passage, facilitating earthworm survival, reproduction and decomposition of agricultural waste. The loose and perforated soil structure allowed easy penetration of earthworms, transforming the soil into fertile compost. The research emphasizes the importance of soil moisture of semi-arid ecosystems thus highlighting the seasonal significance governing earthworm activity. The study provides insights into the mechanical ability of earthworms, its sensitivity to soil compaction and the influence of high hydration of the region. Inoculation during the winter period indicates increased earthworm activity setting the stage for enhanced compost production in the upcoming hot periods of summer months. The findings suggest that optimizing vermicomposting practices with altered feeding stocks, could further improvise compost and earthworm production and productivity in subsequent seasons. The study contributes for sustainable utilization of E. fetida in composting, its regional and seasonal efficacy turns trash to treasure for enhanced agricultural efficacy

The article outlines a creative approach by fusing ideas from fuzzy contractions, graph mappings, and Kannan mappings to create a brand-new notion known as "Kannan-graph-fuzzy contraction." This combination of concepts makes it possible to create a unique framework for resolving real-world issues controlled by nonlinear models. It is anticipated that using Kannan-graph-fuzzy contractions will offer a fresh approach to discussing solution existence in situations where these ideas overlap. This strategy might have a significant impact on a lot of real-world applications, proving how practical multidisciplinary techniques are for tackling issues in the real world originating from technology and engineering. The article includes several illustrated examples based on computer simulations, making the results more explicit.

The eruption of COVID-19 patients in 215 countries worldwide has urged for robust predictive methods that can detect as early as possible the size and duration of the contagious disease and also providing precision predictions. In much recent literature reported on COVID-19, one or more essential parts of such investigation were missed. One of the crucial elements for any predictive method is that such methods should fit simultaneously as much data as possible; these data could be total infected cases, daily hospitalized cases, cumulative recovered cases, and deceased cases, and so on. Other crucial elements include sensitivity and precision of such predictive methods on the amount of data as the contagious disease evolved day by day. To show the importance of these aspects, we have evaluated the standard SIRD model and a newly introduced Gaussian-SIRD model on the development of COVID-19 in Kuwait. It is observed that the SIRD model quickly picks up the main trends of COVID-19 development, but the Gaussian-SIRD model provides precise prediction a longer period of time.

One of the special trends in health care is the increasing availability of data and services to the cloud, especially for convenience (for example, providing a complete patient medical record without interruption) and savings (for example, economic issues). Management of health care data). However, there are limitations to using common cryptographic prototypes and access control models to address security and privacy concerns in an increasingly cloudy environment. In this paper, we explore the potential and capacity of using China's Blockchain technology to protect health care data hosted in the cloud. We also explain the real challenges of such an approach and further research is needed. Health care is a highly data-dependent domain, with large amounts of data being created, published, stored and accessed daily. For example, data are created when a patient undergoes a number of examinations (such as computed tomography or computed tomography scans) and the data need to be sent to the radiologist and then to a physician. The visit results are then stored in the hospital, and then need to be accessed later by another physician at another hospital within the network. It is clear that technology can play an important role in improving the quality of care for patients (for example, using data analytics to make informed medical decisions) and potentially costing more by allocating resources more efficiently in terms of personnel, equipment, etc. , Reduce. For example, paper-based data extraction is difficult to extract into systems (for example, it is costly and may involve data entry errors), archiving them and accessing them as needed is costly. These challenges may cause medical decisions to be incomplete, requiring repeated tests for missing information or missing data stored in another hospital in another state or country (at the expense of increased costs and no convenience). (For patients) and so on. Because of the nature of the industry, it is important to ensure the security, privacy and integrity of health care data. As a result, there is definitely a need for a secure and secure data management system.

Mercury (Hg (II)) contamination is indefatigable global hazard which causes severe permanent damages to human health. Extensive research has been carried out to produce mercury adsorbents however they are still facing certain challenges limiting their upscaling. Herein we reported the synthesis of novel amine impregnated inverse vulcanized copolymer for effective mercury removal. Poly(S-MA) was prepared using sulfur and methacrylic acid employing inverse vulcanization method following by functionalization. The polyethylenime (PEI) was impregnated on poly(S-MA) to increase the adsorption active sites. The developed adsorbent was then characterized using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR confirmed formation of copolymer and successful impregnation of PEI and SEM revealed composite porous morphology of the copolymer. Amine impregnated copolymer (amine@poly(S-MA)) outperformed poly(S-MA) in mercury as it showed 20 % superior performance with 44.7 mg/g maximum adsorption capacity. The adsorption data best fits the pseudo second order which indicates that the chemisorption is most influential mechanism in this case indicating the involvement of NH2 in mercury removal. The adsorption is mainly monolayer on homogenous surface as indicated by 0.76 value of Redlich-Peterson exponent (g) which describes the adsorption nature advent from R2 value of 0.99.

To handle the huge amount of data generated by IoT devices, Big Data processing tools make it easier. This paper discusses the Big Data concept and its main V’s characteristics. It further describes IoT-enabling technologies; nominally cloud computing such as SaaS and PaaS. The centralization and infrastructure of Big Data systems, and how Cloud Computing gives a platform access to the data from anywhere. The paper explores IoT with big data architectural solutions for various use cases across the healthcare and transportation sectors.

In this paper, we discussed the motion of neutral and charged particles in Schwarzschild black hole immersed in an electromagnetic universe (SEBH). The SEBH represents a mass M coupled to an external electromagnetic field that was derived from the metric of colliding electromagnetic waves with double polarization. Our study examine how the external electromagnetic field affects the trajectory of neutral and charged particles. First, the trajectories of both photon and test particle are studied. Then, the exact solutions for the trajectories are obtained in terms of the Jacobi-elliptic integrals for all possible energy and angular momentum of test particle and photon. We have also discussed the motion of charged particle and obtained the radius of the innermost circular orbit (ISCO). It is especially interesting when the charge sign is positive since this creates a conflict between gravitational (attraction force) and electric (repulsion force). Furthermore, we discuss the Lyapunov exponent and the effective force influencing particles in SEBH spacetime.

Bismuth oxides are well-known electro-catalysts in fuel cells systems; they are usually used as anodic materials for the oxidation of low molecular weight alcohols. The utilization of BiO₂ and MnO₂ as catalysts in the pharmaceutical analysis is analytical method for the determination of heavy metal antibacterial agents in Pharmaceutical Dosage form is developed. The method is based on the voltammetric determination of heavy metal using Bidified platinum electrode by Bismuth oxide. The two components are oxidized at the Bidified electrode surface with the development of current that is linearly proportional to their concentrations in the range of 7.04*10^-7- 1*10^-3 M heavy metal. The oxidation reaction of the two components is pH-dependent, in which the buffer used is Britton-Robinson at pH = 7.00 where maximum peak current and maximum peak separation is obtained. The regression factors obtained from the calibration curves are 0.9812. The method of analysis was validated, where the limit of detection (LOD) and the limit of quantitation (LOQ) were calculated to be 1.44*10^-4 M, 4.36*10^-4 M and 1.27*10^-4 M, 3.84*10^-4 M respectively, the percentage recovery of both components was also calculated to 77 % for heavy metal.

Trends focused on the Global Innovation Index (GII) as a measure for progress of nanochemistry. This paper provides projections of recent developments in the word in nanochemistry based on the Global Innovation Index as a predictor for certain Arab countries. The GII is an annual ranking of countries by its ability and performance in innovation and is calculated on a basic average from five and two pillars in two sub-indexes, the Innovation Input Index and the Innovation Output Index. Each pillar represents a trait of creativity and consists of up to five measures, with a weighted average formula for measuring their ranking. In 2008, the GII rose to 36.3 in 2016 from 0.5. The GII is smaller than the GII in Arabic countries worldwide. During the years 2013-2016, the worldwide GII was increasing while for the same period, for Arabic countries, this decline could be explained by economic and industrial wars in the Arab region.

Ferrocene and its derivatives have ecologically effective antidetane properties. In this regard, ferrocene reacts with cyclic ketones and ferrosenylcarbinols are synthesized. It should be noted that ferrocene enters into electrophilic reactions and the process takes place in an acidic environment. In addition, the yield of the new product was small compared to the reactions of ferrocene with non-cyclic ketones. This is due to the spatial structures of molecules. The elemental analysis of obtained compounds was carried out; the structures were researched by cyclic voltammograms and Chronoamperometric.

As a consequence of a three-stage synthesis from terephthalic aldehyde, a series of 3,3 '- (1,4-phenylene) perchlorates including methyl, hydrogen, acetyl, bromio, methoxy and nitro groups (R = Br, H, Me). The matching formazans were reacted with formalin in dioxane in the presence of perchloric acid to produce tetrazin ium salts. Formazans were synthesized by reacting terephthalic aldehyde phenylhydrazone with ar ene diazonium tosylates in a DMF/pyridine combination. The use of ar ene diazonium tosylates greatly simplified the separation and purification of formazans. The p henylhydrazone was produced in aqueous dioxane using the usual approach from terephthalic aldehyde and phenylhydrazine/hydrochloric acid. Individual f ormazans and tetrazinium perchlorates were isolated and characterized by elemental analysis, IR, NMR, UV spectroscopy. The electrochemical reduction of tetrazinium perchlorates was investigated using cyclic voltammetry (CV). Thus, all salts in the cathode region have two one-electron reduction peaks, which are connected to the sequential production of a radical cation and a biradical. It was discovered that donor substituents (R: OMe, Me) in the aromatic ring at position 1 accelerate tetrazinium cation reduction, whereas acceptor substituents (R: NO₂, COMe,) inhibit this process. On this premise, it was proposed that in the presence of donor substituents in the aromatic ring at position 1, the matching bis-verdazyl radicals should be easily generated. As a result, 3,3'- (1,4-phenylene) perchlorates are possible antecedents of symmetric biradical systems based on verdazyl radicals.

This study on the production of a modern natural water electrochemical antimony (II) test include the use of platinum platinum electrode electrodes. Antimony (II) was pre-concentrated on the modified electrode surface and adsorbed to the surface, oxidizing at E = -680 mV. Compared to the platinum electrode, the platinum nanoelectrode exhibited superior performance and, unexpectedly, received a higher electrochemical response. After 25 min of accumulation, time the best-defined anodic peak was obtained with 0.2 mol L^-1 KNO₃ pH 5.0. Using these parameters, the L^-1 Sb ^{2 +} calibration plot was linear over range 1 = 10⁻⁸ to 5x10⁻⁶ mol. The precision was tested by carrying out eight replicate measurements at a concentration of 2.5x10⁻⁵ mol. L^-1; the variance coefficient was 2.9%. The method was applied to analyte determination in water samples from the river. Other metal ion attack on Sb's (II) voltammetric response has been studied. In the SEM image, the nanoparticle electrode was clearly observed and characterized by X-ray diffraction and cyclic voltammetry

This study was to designed to develop sorafenib-loaded polymeric nanoparticles, surface-modified with pluronic F-127 for the effective treatment of hepatocellular (HCC) and renal cell carcinomas (RCC). Poly lactic coglycolic acid (PLGA) was used to encapsulate different concentrations of sorafenib by a simple modified solvent evaporation method applying pluronic F-127 as a surfactant and coating agent. The preformulation and characterization studies were conducted to evaluate the incompatibilities among sorafenib, PLGA and pluronic F-127, and physicochemical properties of the formulations, respectively. The sizes of the coated and plain PLGA nanoparticles were ~140 ± 14.7 nm and ~ 120 ± 10.1 nm, respectively. It has been confirmed from the in vitro release studies that PLGA sustained the release of sorafenib, avoiding the initial burst release, while the in vivo studies demonstared that surface-modified nanoparticles have greater affinity in the target aorgans than plain PLGA nanoparticles and free drug keeping the dose constant (20 mg/kg body weight). The delivery of sorafenib-loaded polymeric PLGA nanoparticles into the target tissues and their pharmacokinetic parameters have been improved significantly compared to the reported formulations.

In this paper, the boiling flow inside a nanochannel with 700000 argon particle has been simulated by molecular dynamics (MD) simulation. This approach has been employed to analysis the superheated flow and its heat transfer pattern as well. For all simulations an external thrust force varying from 1 PN to 12 PN is exerted on inlet nanoparticles along the channel to have the forced annular boiling flow. Computations reveal that saturation condition and superheat degree have significant impacts on the liquid-vapor interface. Furthermore, because of the major influence of surface tension throughout a nanochannel, the x-velocity of liquid film and vapor core has not considerable fluctuations and stay smooth. All provided results show the behaviors completely similar to the available outcomes in the literature.

This study explored the living situations, financial conditions, religious obligations, and social distancing of Muslims during the covid 19 pandemic. In total, 20 Muslim community members living in the Kanto region were recruited, 15 of them were included in the in-depth qualitative and five in the focus group interviews. The Snowball method was used, and the questionnaires were designed into four themes. The audio/video interviews were conducted via Zoom and NAVIO was used to analyse the data thematically. The major Muslim events were cancelled, and the recommended physical distancing was maintained during the prayers at home and in the mosques. The Japanese government's financial support to each person was a beneficial step towards social protection, which was highlighted and praised by every single participant. Regardless of religious obligations, the closer of all major mosques in Tokyo demonstrates to the Japanese community how serious they are about adhering to the public health guidelines during the pandemic. This study highlighted that the pandemic has affected the religious patterns and behaviour of Muslims from inclusive to exclusive in a community and narrated the significance of religious commitments.

Task fMRI has played a critical role in recognizing the specific functions of the different regions of human brain during various cognitive activities. This study aimed to investigate group analysis and functional connectivity in the Faradarmangars brain during the Faradarmani CF (FCF) connection. Using task functional MRI (task-fMRI), we attempted the identification of different activated and deactivated brain regions during the Consciousness Filed connection. Clusters that showed significant differences in peak intensity between task and rest group were selected as seeds for seed-voxel analysis. Connectivity of group differences in functional connectivity analysis was determined following each activation and deactivation network. In this study, we report the fMRI-based representation of the FCF connection at the human brain level. The group analysis of FCF connection task revealed activation of frontal lobe (BA6/BA10/BA11). Moreover, seed based functional connectivity analysis showed decreased connectivity within activated clusters and posterior Cingulate Gyrus (BA31). Moreover, we observed an increased connectivity within deactivated clusters and frontal lobe (BA11/BA47) during the FCF connection. Activation clusters as well as the increased and decreased connectivity between different regions of the brain during the FCF connection, firstly, validates the significant effect of the FCF and secondly, indicates a distinctive pattern of connection with this non-material and non-energetic field, in the brain.

As Li-ion batteries use is spreading, incidents in large energy storage systems (stationary storage containers, …) or in large-scale cell and battery storages (warehouse, recyclers, …), often leading to fire, are occurring on regular basis. Water remains one of the most efficient fire extinguishing agents for tackling those battery incidents and large quantities are usually necessary. Since bat-teries contains various potentially harmful components (metals and their oxides or salts, sol-vents…) and that thermal runway induced battery incidents are accompanied with complex and potentially multistage fume emissions (containing both gas and particles) the potential impact of fire run-off water on the environment should be considered and assessed carefully. The tests presented in this paper focus on the analysis of the composition of run-off waters used to spray NMC Li-ion modules under thermal runaway. It highlights that waters used for fire-fighting are susceptible to contain many metals, including Ni, Mn, Co, Li and Al mixed with other carbonaceous species (soot, tarballs) and sometimes undecomposed solvents used in the elec-trolyte. Extra-polation of pollutant concentrations compared with PNEC values showed that, for large scale incidents, run-off water could be potentially hazardous to the environment.

Health care operations in many hospitals are experiencing increasing demand which is however hindered by the limited resources available. The imbalance between the demand and service provision capacity within the hospitals have resulted in long waiting times for service delivery due to overcrowding, high costs of treatment as well as low levels of patient’s satisfaction. The above problems are attributed to the development of hospital management information system. This dissertation is focused on investigating some of the causes of the increased cost and time consumption as well as low levels of patient’s satisfaction in the application of hospital management information system. The study used comparative design to make a comparison of the respondents from two different hospital facilities where 400 health workers were drawn for research. The questionnaire was used as a survey tool for the study that involved both qualitative and quantitative analysis. The results of the study indicate various playing factors that arise due to the development of the hospital management information system. These factors include the large functionality of the system, the need for training of the end users, the increasing ageing population, and delays. The identified factors play a significant role in the way the information system impacts the time taken, the cost involved, and patient satisfaction. Keywords: health, hospital, doctors, technology, information system, time, and cost.

Abstract In This research we will describe how to deal the system with users to make the work in the company or in any work space . in application forms interact with users inside the system . application form of any system must creates a many graphical interface for user ant we should take care about who is dealing with the system , Additionally, application forms used from different type of user so that we must take care about this points during designing the system for different users . Application Forms in the system consists of many programs, or components and function we are designing it. the instructions inside program can be execute by clicking on the command button and we can create specific process in the system.

This paper has experimentally measured volcanic tufa electrical conductance. The calculations are carried out in accordance with the potential of cyclic voltammetry in a constant state. The cyclic voltammograms nanoelectrode platinum prepared electrochemically were examined in the range -0.2 to 1.2 V vs. AgCl [Cl^-]:1.0 M in the presence and absence of volcanic tuff in the aqueous solution of 1.0 M HCl. The cyclic voltammetry studies show that the Nano platinum film suffers degradation when the potential exceeds +0.85 V, and below this potential, it is quite stable. The redox reaction of the electrode is reversible. The nanoparticle platinum synthesized at low temperature and high acid concentration exhibits higher electronic conductivities. It has been observed that, relative to area under the peak aggregate tests, the use of volcanic concrete was showing a large increase in electrical conductivity. It was shown that with cyclic voltammetry, three well-defined anode peak could be achieved at a power of 0.0, 0.4 and 0.6 V versus Ag/AgCl.

It is important to increase the quality of health and medicine. A wearable system for continuous monitoring of the patient is important to overcome this issue. Thus a patient with Arrhythmia due to its low cost and success in saving the life of the patient was the right option for the care partner. In addition, the device will provide a consumer with a smart smartphone application with accurate pulse beat and body temperature data in real time. MAX 30100 and LM35 are primarily used for the detection of human heart and temperature. The performance of these sensors is generated by an arrhythmia algorithm in the esp32 segment.

An electrochemical sensing platinum nanoparticle in the tantalum electrode is provided by means of an Ion Beam Sputtering Deposition (IBSD). The electrode was made with a Pt solution, sputtered simultaneously with hydrochloric acid corrosion on tantalum substrate. In the study of heavy metal ions, for example, the platinum nanoparticle electrodes as prepared were used Square wavelength voltammetry (OSWV) Hg²⁺, Cu²⁺ and Ag²⁺. The porous electrodes were observed in a broader range by the Pt nanostructure electrode for heavy metal ions. Furthermore, the susceptibility to detection has been shown to be saturated as the thickness of the layer electrode exceeded 50 nm. For Hg²⁺ 0,003-1 M, for Cu²⁺ 0,005-3 M and for Ag²⁺ the linear detection scale is 0,009-4 M. There has also been good reusability and repeatability. In addition, a scan electron microscope (SEM) used to study platinum electrode forming process and nanostructure. This electrode will have interesting applications in sensing systems.

Today, contamination from heavy metals in the atmosphere is a global concern. Efficient detection techniques are therefore necessary if heavy metal exposure levels in different media are to be determined. The voltammetry method for in situ detection of heavy metal ions is a very sensitive electrochemical method. This thesis explores emerging developments in electrode alteration, materials production and experimental optimization. An electrochemical sensing platinum nanoparticle in the tantalum electrode is provided by means of an Ion Beam Sputtering Deposition (IBSD). The electrode was made with a Pt solution, sputtered simultaneously with hydrochloric acid corrosion on tantalum substrate. In the study of heavy metal ions, for example, the platinum nanoparticle electrodes as prepared were used Square wavelength voltammetry (OSWV) Hg²⁺, Cu²⁺ and Ag²⁺. The porous electrodes were observed in a broader range by the Pt nanostructure electrode for heavy metal ions. Furthermore, the susceptibility to detection has been shown to be saturated as the thickness of the layer electrode exceeded 50 nm. For Hg²⁺ 0,003-1 M, for Cu²⁺ 0,005-3 M and for Ag²⁺ the linear detection scale is 0,009-4 M. There has also been good reusability and repeatability. In addition, a scan electron microscope (SEM) used to study platinum electrode forming process and nanostructure. This electrode will have interesting applications in sensing systems.

In computer networks, loss of data packets is inevitable, in particular, because of the buffer memory overflow of at least one of the nodes located on the path from the source to the receiver, including the latter. Such losses associated with overflows are hereinafter referred to as congestion of network nodes. There are many ways to prevent and eliminate overloads; these methods, in the majority, are based on the management of data flows. A special place is taken by the maintenance of packages, taking into account their priorities. The article considers a number of original technical solutions to improve the quality of control and reduce the required amount of buffer memory of network nodes. The ideas of these solutions are quite simple for their implementation in the development of appropriate software and hardware for telecommunication devices.

The objective of this study is to determine the relationship between body condition score (BCS) and body carcass fat (BCF) of ewes at two key stages of the production cycle. Data were collected from 88 Coopworth ewes including BCS measurements manually evaluated by the farm manager, BCF measurements determined by computerized tomography (CT) and body parameter measurements automatically determined by an image processing application. Artificial neural network (ANN) statistical analysis method was used to develop a relationship between the body parameters and the BCF with an r2=0.96 and RMSE=1.01 using all top and side variables.

This paper presents a methodology for the integration of Building Information Modeling (BIM) and Life Cycle Cost Analysis (LCCA) to assess the economic implications of designing aging-in-place (AIP) homes at the conceptual stage. With the global increase in the aging population, there is an increased demand for housing solutions tailored to the needs of elderly individuals. Focusing on the importance of the early phase of design, this study aims to improve the process of making efficient decisions by providing a comprehensive assessment of the life cycle costs associated with AIP homes. The study introduces a semi-automated model for the economic evaluation of AIP homes, enabling the estimation of costs throughout the houses’ entire life cycle, from design and construction to operation, maintenance, and eventual renovation or disposal. The said model facilitates the exploration of the long-term economic feasibility of design’s related decisions with an emphasis on the importance of considering the life cycle costs early during the design process to optimize the functionality and economic viability. By investing in accessible and universal design features upfront, the initial costs for modifications can lead to long-term savings by reducing the need for extensive retrofits. The model can easily do comparison between different design alternatives in terms of their lifecycle costs, allowing designers to assess the financial impact of using important features in their design such as wider doorways, accessible bathrooms, and elevators. Overall, this study provides valuable insights for designers and homeowners about the economic aspects of designing AIP homes as a support for efficient decision-making during the early stages of the design process.

Background: Delivery of quality family planning services depends on availability of skilled health care providers, which is often a challenge in Low- and middle-income countries. This study evaluates the effects of a targeted training program on family planning services delivered by the Lady Health Workers (LHWs) in six districts of Punjab, Pakistan. The primary goal was to enhance the quality and accessibility of family planning services, recognizing the pivotal role of LHWs in community health. Methods: Using a robust panel data difference-in-differences (DiD) approach, we analyzed the electronic medical records (EMR) of 1,410 LHWs over a nine-month period. This timeframe in-cluded both pre-training (July to December 2022) and post-training (April to June 2023) phases. Our assessment focused on the impact of training on five outcome variables: the number of follow-up clients, the number of Intrauterine Contraceptive Device (IUCD) clients, the number of condom clients, the number of modern method clients, and the number of injection clients. We also con-sidered control variables such as LHW age, LHW education, the number of eligible couples in each LHW's catchment area, and a categorical variable for the districts. Results: The positive and statistically significant (p<0.05) coefficients across various service cat-egories – Follow Up Clients [Coeff: 1.00, CI: (0.30 - 1.70)], IUCD Clients [Coeff: 0.23, CI: (-0.01 - 0.46)], Condom Clients [Coeff: 1.41, CI: (0.97 – 1.86)], Modern Method Clients [Coeff: 1.82, CI: (0.96 – 2.68)], and Injection Clients [Coeff: 0.32, CI: (0.14 – 0.50)]. These findings indicate enhanced productivity among LHWs who have received training, with results significant at the 95% con-fidence interval (CI). Conclusion: The study highlights the effectiveness of targeted training programs in boosting family planning services at the community level and offers insightful implications for policy-makers and health practitioners. While focused on six districts in Punjab, these promising results emphasize the need for ongoing training and support for frontline health workers to bolster family planning initiatives.

Aravalli Mountain Range is an example of erosional mountains, trending NE-SW, shows numerous faults and lineaments. Udaipur area, situated south-east part of the mountain, is considered as tectonically active. So the main objective is to study relative tectonic activity of the Ahar watershed of Udaipur, Rajasthan, India. To assess relative tectonic activity of the area, geomorphic indices such as stream length gradient index (SL), asymmetry factor (Af), basin shape (Bs), valley floor width to valley height ratio (Vf), mountain front sinuosity (Smf), hypsometic integral (Hi), hypsometric curve and transverse topographic symmetry factor (T) is applied. DEM (SRTM), Google earth image and enhanced image of Landsat TM (2008) is used to extract linear features. Result of these geomorphic indices of each sub-watersheds are used to divide area from low to high relative tectonic activity classes, expressed as relative tectonic active index (Iat) and according to Iat value the sub watershed UDSW2, 3 and 4 is tectonically relatively more active than remaining part of the area. Field validation associated with evidences highlighted by using geomorphic indices as well as stream deflrction and lineament analysis reveals that the Ahar watershed of Aravalli Range, particularly the north-western flank, is most affected by tectonic activity.

Severe thunderstorms are often accompanied by strong vertical air currents, temporary wind gusts, and heavy rainfall. The development of this atmospheric phenomenon over tropical shallow water zones, such as bays, can lead to intensification of atmospheric disturbances and produce a small-scale storm surge. Here, the storm surge that occurred on 19 March 2017 in the Persian Gulf coastal area has been investigated. Air temperature, precipitation, mean sea level pressure, wave height, wind direction, wind speed, geopotential height, zonal components, meridional winds, vertical velocity, relative humidity, and specific humidity obtained from the European Centre for Medium-Range Weather Forecasts (ECMWF (and Global Forecast System (FNL) were used to implement the Weather Research and Forecasting (WRF) model. The results showed that the main cause of the storm surge was the occurrence of a supercell thunderstorm over the Persian Gulf. The formation of this destructive phenomenon resulted from a downburst under Cumulonimbus cloud and high-velocity air subsidence, after collision with the sea surface coinciding with the high tide. This caused a severe, yet temporary, gust, which in turn caused the creation of the four waves of 3.1 m height along the coast of Bandar Dayyer.