A common problem in education has always been to get students to achieve an adequate level of motivation and engagement. Many evidences show that gamification has the potential to make learning more engaging, motivating and effective. However, it is essential to design gamified experiences thoughtfully, ensuring that they align with educational objectives and promote meaningful learning outcomes, and so the lack of established design methodologies can lead to unintended consequences.

Rheumatoid arthritis (RA) is an autoimmune disease mainly characterized by joint inflammation. It presents extra-articular manifestations, with the lungs one of the affected areas. Among these, damage to the pulmonary interstitium (Interstitial Lung Disease -ILD) has been linked to proteins involved in the inflammatory process and related to extracellular matrix deposition and lung fibrosis establishment. Peptidyl arginine deiminase enzymes (PAD), which carry out protein citrullination, play a role in this context. A genetic association analysis was conducted on genes encoding two PAD isoforms, PAD2 and PAD4. This analysis also included ancestry informative markers and protein level determination in samples from patients with rheumatoid arthritis, RA-associated ILD, and clinically healthy controls. Significant single nucleotide variations (SNV) and a haplotype were identified as susceptibility factors for ILD-RA development. Elevated levels of PAD4 were found in ILD-RA cases, while PADI2 showed an association with RA susceptibility. This document presents the data obtained from the conducted research, which has been published.

The purpose of this study is to analyse the feasibility of using waste from granite gang saws (GCW-GS) to manufacture ultra-high performance, steel-fibre reinforced concrete (UHPFRC). These machines cut granite blocks by abrasion using a steel blade and slurry containing fine steel grit. The waste generated by gang saws (GCW-GS) contains up to 15% Fe2O3 and up to 5% CaO. This is the main difference from the waste produced by diamond saws (GCW-D). Consequently, the second objective of this study is to compare the results of the waste obtained with gang saws with that from diamond saws, in order to determine the influence of iron and calcium oxides. The waste from cutting granite with gang saws was used in different percentages to replace micronized quartz powder of natural origin in the manufacture of UHPRFC. All the test specimens were analysed to determine their compressive strength, elasticity modulus, flexural strength and indirect tensile strength. The final conclusion is that wastes from both gang saws and diamond saws can be used to manufacture UHPFRC with an improvement in the mechanical properties up to a 35% replacement. The results for GCW-GS are better, mainly due to the pozzolanic effect of the iron dioxide. For higher percentage replacements the mechanical properties are close to the control concrete with small decreases.

Spent batteries recycling is an important way to obtain low-cost graphite. Nevertheless, the obtaining of crystalline graphite with a rather low density of defects is required for many applications. In the present work, high-quality graphites have been obtained from different kinds of spent batteries. Black masses from spent alkaline batteries (batteries black masses, BBM), and lithium-ion batteries from smartphones (smartphone black masses, SBM) and electric and/or hybrid vehicles (lithium-ion black masses, LBM) were used as starting materials. A hydrometallurgical process was then used to obtain recycled graphites by acidic leaching. Different leaching conditions were used depending on the type of the initial black mass. The final solids were characterized by a wide set of complementary techniques.

We investigate the influence of the Abrikosov vortex lattice on the Casimir force in a setup constituted by high-temperature superconductors subject to an external magnetic field. The Abrikosov lattice is a property of type II superconductors in which normal and superconducting carriers coexist and these latter define a periodic pattern with squared symmetry. We find that the optical properties determined by spatial redistribution of the superconducting order parameter induce Casimir forces with a periodic structure whose minimal strengths coincide with the vortex cores.

A new copper(I) complex, [Cu2(L)2dppm](PF6)2 (1) [L = 3-(2-Pyridyl)-5,6-diphenyl-1,2,4-triazine and dppm: Bis(diphenylphosphino)methane] was prepared and characterized by IR, 1H-NMR, 31P-NMR spectroscopy, elemental and thermogravimetric analysis, and single-crystal X-ray diffraction technique. Complex 1 is a dinuclear compound, showing that L and dppm act as tridentate and bidentate chelating ligands, respectively. The two Cu(I) atoms exhibit a distorted tetrahedral coordination sphere embedded in N3P environments. The supramolecular interactions in the solid-state structure are characterized by C−H···N, C−H···F, C-H···π and π···π intermolecular interactions that were analyzed by inspection of the Hirshfeld surface and fingerprint plots. Additionally, the complex was studied experimentally in solution by UV–Vis spectroscopy and cyclic voltammetry; also, theoretical studies with Time-Dependent Density Functional Theory (TD-DFT) were performed. Moreover, the optical and electrochemical properties have been studied, focusing on the band gap. Compound 1 has been used as a co-sensitizer in a dye-sensitized solar cell, showing good activity.

BACKGROUND Detecting total cholesterol in dried blood spots could aid in identifying individuals with a high likelihood of familial hypercholesterolemia and could be used as a screening measure. This study aims to assess the diagnostic accuracy of dried blood spots on Whatman 903 paper cards using a manual enzymatic technique. METHODS A total of 394 samples collected as serum and dried blood spots were compared. Cholesterol was determined in serum using the automated reference method, while cholesterol on paper was measured using a manual enzymatic method. Within- and between-day diagnostic variability were analyzed. The correlation between both methods was assessed using Passing-Bablok regression and Bland-Altman plot. Internal validation of our correlation formula was performed on 149 samples, along with external validation of the formula proposed by Corso et al. RESULTS The within- and between-day coefficient of variation was found to be lower than 10.14% and 14.09%, respectively. Method comparison yielded an area under the curve of 0.976, with a standard error of 0.009. Passing-Bablok regression indicated a precision of 0.803 and an accuracy of 0.96. Internal validation precision was measured at 0.716. Regarding internal validation, calculated cholesterol with our regression line did not differ from serum cholesterol analysis, while significant differences were observed in calculated cholesterol levels using the external formula. CONCLUSIONS Total cholesterol analysis in dot blood spots demonstrates high precision and reproducibility. This method reliably enables the incorporation of this biological marker into neonatal screening for familial hypercholesterolemia detection.

This work is located in a growing sector within the field of renewable energies, wave energy converters (WECs). Specifically, it focuses on one of the point absorbers wave (PAWs) of the hybrid platform W2POWER. With the aim of maximising the mechanical power extracted from the waves by these WECs and reduce their mechanical fatigue, the design of five different model predictive controllers (MPCs) with hard and soft constraints has been carried out. As contribution of this paper, two of the MPCs have been designed with the addition of an embedded integrator. In order to validate the MPCs, an exhaustive study on performance and robustness is realized through simulations carried out in which uncertainties in the WEC dynamics are considered. Furthermore, looking for realistic in these simulations, an identification methodology for PAWs is proposed and validated by means of real time series of a scale prototype.

Even in the first quarter of XXI century, the presence of organic dyes in wastewaters is a normal occurrence in a series of countries, and being these compounds toxics, their removal from these waters is of a necessity. Among the separation technologies, adsorption processing appeared as one of the most widely used to reach this goal. The present work reviewed the most recent approaches (first half of 2021 year) about the use of a variety of adsorbents on the removal of, also, a variety of organic dyes of different nature.

Post-quantum public cryptosystems introduced so far do not define an scalable public key infrastructure for the quantum era. We demonstrate here a public certification system based in Lizama’s non-invertible Key Exchange Protocol which can be used to implement a public key infrastructure (PKI), secure, scalable, interoperable and efficient. We show functionality of certificates across different certification domains. Finally, we discuss that non-invertible certificates can exhibit Perfect Forward Secrecy (PFS).

Mercury is a toxic metal, thus, it is an element which has more and more restrictions in its uses, but despite the above, the removal of this metal, from whatever the form in which it is encountered (zero valent metal, inorganic or organic compounds), and from different sources, is of a widespread interest. In the case of Hg(II), or Hg²⁺, the investigations about the treatment of Hg(II)-bearing liquid effluents (real or in most cases synthetic solutions) appear not to end, and from the various separation technologies, adsorption is the most popular among researchers. In this topic, and in the 2019 year, more than 100 publications had been devote to this field: Hg(II)-removal-adsorption. This work examined all of them.

The transport of indium(III), from HCl solutions, across a supported liquid membrane in flat-sheet configuration was investigated, being the carrier the ionic liquid HA324H+Cl- (derived from the tertiary amine Hostarex A324 and hydrochloric acid). Different variables affecting the metal transport: hydrodynamic conditions in the source and receiving phases, metal and HCl concentrations in the source phase, and carrier concentration in the membrane phase, were investigated. Also the transport of indium(III) using carriers of various nature: ionic liquids, alcohol, ketone, phosphine oxide and phosphoric ester, was compared. The metal transport was modelled describing the transport mechanism as: diffusion across the source diffusion layer, a fast interfacial chemical reaction, and diffusion of the InCl4--carrier complex through the membrane support. Diffusional parameters for the transport of indium(III), from the experimental data and the model, were estimated.

The transport of indium(III), from HCl solutions, across a supported liquid membrane in flat-sheet configuration was investigated, being the carrier the ionic liquid HA324H⁺Cl^- (derived from the tertiary amine Hostarex A324 and hydrochloric acid). Different variables affecting the metal transport: hydrodynamic conditions in the source and receiving phases, metal and HCl concentrations in the source phase, and carrier concentration in the membrane phase, were investigated. Also the transport of indium(III) using carriers of various nature: ionic liquids, alcohol, ketone, phosphine oxide, etc., was compared. The metal transport was modelled describing the transport mechanism as: diffusion across the source diffusion layer, a fast interfacial chemical reaction, and diffusion of the InCl₄^--carrier complex through the membrane support. Diffusional parameters for the transport of indium(III), from the experimental data and the model, were estimated.

The present investigation deals with the adsorption of chromium(III) from alkaline media using multi-walled carbon nanotubes. The adsorption of Cr(III) has been studied under various experimental conditions: stirring speed of the aqueous solution, initial metal and adsorbent concentrations, NaOH concentration in the aqueous solution, and temperature. The rate law indicated that chromium adsorption is well represented by the particle diffusion model, whereas the adsorption process fits to the pseudo-second order kinetic model within an exothermic character. Equilibrium data fit to the Langmuir type-2 equilibrium isotherm in an spontaneous process. Chromium(III) can be eluted from metal-loaded nanotubes using acidic solutions, from which fine chromium(III) oxide pigment can be ultimately yielded.

A key goal of modern neuroscience involves understanding how connections in the brain form and function. Such a knowledge is essential to better inform how defects in the exquisitely complex steps of nervous system growth underlie neuropsychiatric and neurodevelopmental disorders. In the last 40 years, studies of the nervous system in the fruit fly Drosophila melanogaster enabled the discovery of a wealth of molecular and genetic mechanisms that drive the development of these synaptic connections – specialized cell-to-cell connections that are the essential substrate for information flow and processing in the nervous system. The major driver of knowledge focused on studies at the neuromuscular junction due to its ease of examination. Analogous studies in the central nervous system lagged behind due to a lack of genetic accessibility of specific central neuron classes, appropriate synaptic labels compatible with cell-type specific access, and high resolution, quantitative imaging strategies. However, understanding how synapses in central circuits form remains a prerequisite to understanding brain development. In the last decade, a host of new tools and techniques made possible the extension of genetic studies of synapse organization into central circuits and greatly enhanced our understanding of central synapse formation, organization, and maturation. In this review, we consider the current state-of-the-field, focusing on two major elements. We first discuss the tools, technologies, and strategies developed to visualize and quantify synapses in vivo in genetically identifiable neurons of the Drosophila CNS. Second, we explore in depth how these tools enabled a clearer understanding of synaptic development and organization in different circuits of the fly brain and discovered novel molecular mechanisms that underlie synapse formation. These studies establish multiple brain regions in the fly as powerful in vivo genetic models that offer novel insights into synaptogenic regulators and mechanisms of neural development.

Zinc oxide is one of the most important semiconductor metal oxides and one of the most promising n-type materials, but its practical use is limited because of both its high thermal conductivity and its low electrical conductivity. Numerous studies have shown that doping with metals in ZnO structures leads to the modification of the band gap energy. In this work, Al-doped ZnO, Ni-doped ZnO, and undoped ZnO nanocrystalline powders were prepared by sol-gel method coupled with ultrasound irradiation. The doping concentration in ZnO was 1.0 at.% of Al and Ni. Influence of Al³⁺ and Ni²⁺ ions in the ZnO network are explored in this paper. X-ray Diffraction (XRD), Raman Spectroscopy, Nitrogen Adsorption (BET method), X-Ray Fluorescence (XRF) and Field Emission Scanning Electron Microscopy (FESEM) analyses demonstrated the incorporation of metal ions (aluminum and nickel) into the ZnO wurtzite structure. The crystallite size of the sample was decreased from 24.5 nm (ZnO) to 22.0 nm (ZnO-Al) and 21 nm (ZnO-Ni).

Abstract: This article aims to better understand the mechanisms that connect climate change perceptions and general willingness to engage in pro-environmental behavior using Spanish cross-sectional data (N = 403). To do this, we first developed and validated the General Willingness for Environmental Behavior Scale (GWEBS), which includes the classical approach of voluntarily doing new actions but also actions implying not doing things (degrowth) and actions forced by social constraints. The exploratory and confirmatory factor analysis showed a good fit for the one-factor structure, which had adequate validity based on their relationship with other variables. Additionally, the GWEBS distinguished between women and men, left- and right-oriented people, and people who belonged to pro-environmental groups and people who did not. In the second place, we tested the parallel mediator role of eco-anxiety and trust in science in the relationship between climate change perceptions and the GWEBS. The results showed that eco-anxiety, fully, and trust in science partially mediated such a relationship, making them crucial to mobilize the intention to act following the perception. This study contributes to our understanding of the psychological mechanisms that eventually drive pro-environmental behaviors and provides a clear direction for future research.

In recent decades, perovskite-type compounds (ABB′O3) have been exhaustively studied due to their unique ferroelectric properties. In this work, a systematic study aiming to prepare fine particles in the binary system SrZrO₃–SrTiO₃ was conducted under hydrothermal conditions in a KOH (5 M) solution at 200 °C for 4 h under a constant stirring speed of 130 rpm. The precursors employed were SrSO₄ powder (< 38 μm size) and coprecipitated hydrous gels of Zr(OH)₄•9.64 H₂O (Zr-gel) and Ti(OH)₄•4.5H₂O (Ti-gel), which were mixed according to the stoichiometry of the SrZr_1-xTixO₃ in the compositional range of 0.0>x>100.0 mol% Ti⁴⁺. The XRD results revealed the formation of two crystalline phases rich in Zr⁴⁺, an orthorhombic structured SrZr0.93Ti0.07O3 and a cubic structured SrZr0.75Ti0.25O3 within the compositional range of 0.1–0.5 mol of Ti4+. A cubic perovskite-structured solid solution, SrTi1-xZrxO3, was preferentially formed within the compositional range of 0.5>x>0.1 mol% Ti⁴⁺. The SrZrO₃ and SrZr_0.93Ti_0.07O₃-rich phases had particle sizes averaging 3 m with a cubic morphology. However, a remarkable reduction in the particle size occurred on solid solutions prepared with hydrous Ti-gel over contents of 15 mol% Ti⁴⁺ in the reaction media, resulting in the formation of nanosized particles agglomerates with cuboidal shape self-assembled via a 3D hierarchical architecture, the sizes of these particles varied in the range between 141.0–175.5 nm. The limited coarsening of the particles is discussed based on the Zr-gel and Ti-gel dehydration capability differences that occurred under hydrothermal processing.

Charcot-Marie-Tooth (CMT) syndrome is the most common progressive human motor and sensory peripheral neuropathy. CMT type 1E is a demyelinating neuropathy affecting Schwann cells due to pmp22 mutations, modelized by Trembler-J mice. Curcumin, a natural polyphenol com-pound obtained from turmeric (Curcuma longa), exhibits dose- and time-varying antitumor, antioxidant and neuroprotective properties, however, the neurotherapeutic actions of curcumin still remain elusive. Here, we propose curcumin as a possible natural treatment capable of enhancing cellular detoxification mechanisms, resulting in an improvement of the neurodegenerative Trembler-J phenotype. Using a refined method for obtaining enriched Schwann cell cultures, we evaluated the neurotherapeutic action of low dose curcumin treatment on the PMP22 expression, and on the chaperones (HSF1 and Hsp27) and autophagy/mTOR (HDAC6 and ribosomes) pathways in Trembler-J and wild-type genotypes. In wild-type Schwann cells, the action of cur-cumin resulted in strong stimulation of the chaperone and macroautophagy pathway, whereas the modulation of ribophagy showed a mild effect. However, despite the promising neuroprotective effects for the treatment of neurological diseases, we report (demonstrate?) that the action of cur-cumin in Trembler-J Schwann cells could be impaired due to the irreversible impact of ethanol used as a common curcumin vehicle necessary for administration. These results contribute to expand our still limited understanding of PMP22 biology in neurobiology, and expose the intrinsic lability of the neurodegenerative Trembler-J genotype. Furthermore, they unravel interesting physiological mechanisms of cellular resilience relevant for to the pharmacological treatment of the neurodegenerative Tremble J phenotype with curcumin and ethanol. We conclude that the analysis of the effects of the vehicle itself is an essential and in-escapable step to comprehensibly assess the own effects and full potential of curcumin treatment for therapeutic purposes.

This paper presents new above-ground biomass (AGB) and biomass components equations for seventeen forest species in the temperate forests of northwestern Mexico. A data set corresponding to 1336 destructively sampled oak and pine trees was used to fit the models. Generalized method of moments was used to simultaneously fit systems of equations for biomass components and AGB, to ensure additivity. Additionally, the carbon content of each tree component was calculated by the dry combustion method, in a TOC analyser. The fitted equations accounted for on average 91, 83, 84 and 78% of the observed variance in stem wood and stem bark, branch and foliage biomass, respectively, whereas the total AGB equations explained on average 93% of the total observed variance in AGB. The inclusion of h or d²h as additional predictor in the d-only based equations systems slightly improved estimates of stem wood, stem bark and total above-ground biomass, and greatly improved the estimates produced by the branch and foliage biomass equations. The fitted equations were used to estimate AGB stocks at stand level from a database on growing stock from 429 permanent sampling plots. Three machine-learning techniques were used to model the estimated stand level AGB and carbon contents; the selected models were applied to map the AGB and carbon distributions in the study area, which yielded mean values of 129.84 Mg ha^-1 and 63.80 Mg ha^-1, respectively.

The railway infrastructure has played a crucial role in urban development since its inception in the 19th century. This article aims to show how the transformations resulting from the implementa-tion of this transport system have had a particular impact on the city of Istanbul, considering a technical, an engineering and the heritage perspective. To achieve this, an exhaustive review of collected drawings, articles and reports has been carried out since 2012, while starting to work on the architectural coordination of the project. These documents reflect how the Marmaray project covers different aspects, such as materials, signage, civil protection and landscaping. The results obtained demonstrate how a railway infrastructure project not only improves the technical and operational efficiency of traffic in the city, but also protects the natural and historical heritage. As a main conclusion of this investigation, it highlights the necessity for proper coordination between technical interventions in the infrastructure and a comprehensive and integrated strategy that encompasses both the heritage and the urban landscape of Istanbul.

An activated carbon manufacturing process using winemaking waste is analyzed and designed at industrial scale. Starting from experimental research, the chemical transformations and thermodynamics during pruning wood conversion are studied as a basis for plant design. In this way, mass and energy balances of hydrothermal carbonization and physical activation are fulfilled and a thermoeconomic methodology is applied to develop an energy-integrated plant. To achieve this target, a network of heat exchangers is allocated to minimize heat consumption and supply hot domestic water, while a cogeneration cycle is designed to provide electricity and satisfy the remaining heat demand. Furthermore, a sensitivity analysis is carried out to determine the influence of the production scale and other operation parameters, such as annual workload, service life, and capital and feedstock costs, on the economic viability of the plant. The energy balance of the plant indicates that the energy integration design manages to provide 48.9% of the overall process energy demand by crossing hot and cold streams and recovering heat from residual flue gas. On the other hand, the exergy cost analysis identifies the combustion of pruning wood used to provide heat demands as the main source of exergy destruction, confirming the suitability of integration to improve the thermodynamic performance. Including activated carbon production, electricity, and hot domestic water, the exergy efficiency of the plant stands at 11.5%.

The rapid ageing of populations around the World is creating complex challenges for national governments. The establishment of sustainable and equitable long-term care systems for old and dependent people is one of the main issues of social policy in developed countries. The aim of this work is to define a cost model for residential and day care centres for dependent persons in Cantabria (Spain). The cost model will make it possible to establish the theoretical cost of attending to the needs of the different types of dependent persons in the different types of care centres, and the methodology used could be extrapolated to other regions. The daily cost per user for elderly residential care is €53.72. The cost per user in elderly day centres (5 days) is 32.56 euros. In residential centres for people with disabilities, the values range between €47.41 and €75.25 depending on the category of the centre. In three categories of centres the public price is not enough to cover the cost (physical disability, intellectual disability, mental illness – low care), and therefore the administration should reconsider their public prices for these kind of centres if they want to really contribute to the sustainability of these residential care centres. This research will have important implications for policy-makers in a context of fulfilment of SDGs and where better support for old and disabled people and their carers, as well as fair and efficient financing of social care services, are essential to address the current and future challenges of dependency.

We know that the classical Mittag-Leffler function play an important role as solution of fractional order differential and integral equations. We introduce the j-generalized p - k Mittag-Leffler function. We evaluate the second order differential recurrence relation and four different integral representations and introduce a homogeneous linear differential equation whose one of the solution is the j-generalized p-k Mittag-Leffler function. Also we evaluate the certain relations that exist between j-generalized p - k Mittag-Leffler function and Riemann-Liouville fractional integrals and derivatives. We evaluate Mellin-Barnes integral representation of j-generalized p-k Mittag-Le er Function. The relationship of j-generalized p-k Mittag-Leffler Function with Fox H-Function and Wright hypergeometric function is also establish. we obtained its Euler transform, Laplace Transform and Mellin transform. Finally we derive some particular cases.

A bioelectrochemical study of charge transfer in the biofilm/chalcopyrite interface was performed to investigate the effect of surficial sulfur reduced species (SRS), as non-stochiometric compounds or polysulfides (S_n^2-), and elemental sulfur (S⁰) on a biofilm structure during the earliest stages (1, 12 and 24 h) of chalcopyrite biooxidation by A. thiooxidans alone and adding Leptospirillum sp. The surface of massive chalcopyrite electrodes was exposed to the bacteria, which were analyzed electrochemically, spectroscopically, and microscopically. At the studied earlier times, charge transfer and significant differences in the biofilm structure were detected, depending on the presence of Leptospirillum sp. acting on A. thiooxidans biofilms. Such differences were a consequence of a continuous chalcopyrite pitting and promoting changes in biofilm hydropathy. A. thiooxidans modifies the reactive properties of SRS and favors an acidic dissolution, which shifts into ferric when Leptospirillum sp. is present. A. thiooxidans allows H⁺ and Fe³⁺ diffusion, and Leptospirillum sp. allows surpassing the charge transfer (reactivity) barrier between the mineral interface and the ions. The observed changes of hydropathy on the interface are associated to ions and electrons activity and transfer. Finally, a model of S⁰ biooxidation by A. thiooxidans alone or with Leptospirillum sp., is proposed.

Obesity is a risk factor for the development of gestational diabetes mellitus (GDM). However, the most optimal type of nutritional intervention to prevent GDM in high-risk women is not clearly defined. This study investigates if nutritional treatment based on the Mediterranean diet (MedDiet) before 12th gestational week (GW) in women at high risk due to a body mass index (BMI)≥25kg/m2, reduces the rate of GDM and metabolic syndrome (MetS) at 3 years postpartum. We performed a post-hoc analysis of the San Carlos Gestational Prevention Study. A total of 735 women with BMI≥25kg/m2 were evaluated between 2015-2018, 246 in standard diet control group (CG) and 489 in MedDiet intervention group (IG). The rate of GDM was significantly lower in IG compared to CG (25.1%vs31.7%;p=0.037). Postnatal follow-up was completed by 141 women in CG (57%) and 312 women in IG (64%). At 3 years postpartum, we observed a reduction (relative risk 95% confidence interval) in the rates of impaired fasting glucose (IFG) (0.51 (0.28-0.92);p=0.019), obesity (0.51 (0.28-0.92),p=0.041), waist circumference (WC)≥89.5cm (0.54 (0.31-0.94);p=0.022) and MetS (0.56 (0.33-0.94);p=0.003). MedDiet reduces the rate of GDM and postpartum MetS in women with BMI)≥25kg/m2, suggesting that its implementation should be routinely recommended from the first GWs.

Sometimes there are clear and natural limits to the scope of action of a science, and in other cases they are simply convenient ones. Geographic Information Science (GISc) is a transversal science, with contacts with all geosciences but also with various formal sciences such as Mathematics, Logic and Computer Science. A first approach to specifying the limits of a science is through its definition. Definitions of GISc are often so expansive that they have been rightly criticized for practicing gerrymandering, in particular with the rest of the geosciences. To avoid this, an operational definition is proposed that places GISc among the sciences that handle Data and not Information. This solves the gerrymandering problem without really implying a significant cut of what is usually considered within GISc. As an unforeseen consequence, this delimitation will allow it to be characterized as Formal Science, leaving it as the only geoscience with this characteristic.

The viral nervous necrosis virus (VNNV) is the causative agent of an important disease affecting fish species cultured worldwide. Early and accurate diagnosis is at present the most effective control and prevention tool, and the molecular techniques have been strongly introduced and accepted by official organizations. Among those, real time quantitative polymerase chain reaction (rt-qPCR) is nowadays displacing other molecular techniques. However, another PCR-based technology, the droplet digital PCR (ddPCR), is on the increase. It has many advantages over qPCR, such as higher sensitivity and more reliability of the quantification. Therefore, we decided to design and validate a protocol for diagnosis and quantification of SJ and RG type VNNV, using reverse transcription-ddPCR (RT-ddPCR). We obtained an extremely low limit of detection, 10 to 100-folds lower than with RT-qPCR. Quantification by RT-ddPCR, with a dynamic range of 6.8 – 6.8 x 104 (SJ type) or 1.04 x 101 – 1.04 x 105 (RG) cps/rctn, was more reliable than with RT-qPCR. The procedure was tested and validated in field samples, providing the high clinical sensitivity and negative predictive values. In conclusion, we propose this method to substitute RT-qPCR protocols because it exceeds the expectations of qPCR in the diagnosis and quantification of VNNV.

A discharge mixing zone (DMZ) is a defined geographical area or volume of water in the receiving environment of a discharge where initial dilution of the effluent occurs and where exceedance of water quality criteria may be permitted. DMZs are essential to inform determination of discharge consent conditions and an important element of risk management frameworks to reduce any effects of the discharges on the environment and human health. In this review, we describe the principles and technical application of DMZs. We present an overview of the physical processes that govern the dispersion and dilution of wastewater discharges and the fate of contaminants in coastal environments and define key criteria for determining the size of DMZs. We summarize DMZ requirements in international legislation and guidance and exemplify their application to different types of discharges by means of case studies. The selected case studies illustrate different modelling tools for defining DMZs and different monitoring approaches to assess their effectiveness in achieving ecological and human health objectives.

The intracellular calcium concentration ([Ca2+]i) modulation plays a key role in the regulation of cellular growth and survival in normal cells and failure of [Ca2+]i homeostasis is involved in tumor initiation and progression. Here we show that inhibition of Furin by its naturally occurring inhibitor the prodomain ppFurin in the MDA-MB-231 breast cancer cells resulted in enhanced SOCE through TRPC6 activation that associated reduced cells malignant phenotype. Expression of ppFurin in a stable manner in MDA-MB-231 and the melanoma MDA-MB-435 cell lines inhibits Furin activity as assessed by in vitro digestion assays. Accordingly, cell transfection experiments, revealed that the ppFurin-expressing cells are unable to process adequately the PC substrates proVEGF-C and proIGF-1R. Compared to MDA-MB-435 cells, expression of ppFurin in MDA-MB-231 significantly induces Ca2+ entry which is impaired by silencing of TRPC6 expression. Analysis of TRPC6 activation revealed its up-regulated tyrosine phosphorylation in ppFurin-expressing MDA-MB-231 cells. The expression of ppFurin in MDA-MB-231 cells reduced their viability and ability to migrate and enhanced their sensitization to the apoptosis inducer hydrogen peroxide. These findings suggest that Furin inhibition by ppFurin may be a useful strategy to interfere with Ca2+ mobilization leading to breast cancer cells malignant phenotype repression and reduction of their resistance to treatments.

In this research paper, design and development of pyramidal horn antenna for J-band application is reported. It is particularly designed for 17 dB gain and half beam width about 25 degrees at 6.93 GHz. Horn aperture, horn axial length and distance from the throat of the antenna to aperture are the main design constraints which are calculated and used for the antenna design and simulation. Beam width in E-plane and H-plane horn is calculated and it is 19.18 dB and 22.86 dB respectively. The reported antenna design shows good performance for J-band in radiometry, satellite, and radar applications.

A winemaking waste was used as a precursor of activated carbon used in hazardous Cr(VI) removal from solutions. The preparation process consisted of a hydrothermal process, and a chemical activation, of the resulting product, with KOH. The adsorption results showed that the adsorption of Cr(VI) on the obtained activated carbon is strongly dependent on the stirring speed applied to the carbon/solution mixture, pH of the solution, and temperature. The equilibrium isotherm was well fitted to the Langmuir type-II equation, whereas the kinetic can be described by the pseudo-second-order kinetic model. Thermodynamic studies revealed that Cr(VI) adsorption was an exothermic and spontaneous process. Finally, desorption experiments showed that Cr(VI) was effectively desorbed using hydrazine sulfate solutions, and at the same time, the element was reduced to the less hazardous Cr(III) oxidation state.

In this work a new pre-tuning multivariable PID controllers method for quadrotors is put forward. A procedure based on LQR/LQG theory is proposed for attitude and altitude control. With the aim of analyzing performance and robustness of the proposed method, a non-linear mathematical model of the DJI-F450 quadrotor is employed, where rotors dynamics, togheter with sensors drift/bias properties and noise characteristics of low-cost comercial sensors typically used in this type of applications (such as MARG with MEMS technology and LIDAR) are considered. In order to estimate the state vector and compensate bias/drift effects on rate gyros of the MARG, a combination of filtering and data fusion algorithms (Kalman filter and Madgwick algorithm for attitude estimation) are proposed and implemented. Performance and robutsness analysis of the control system is carried out by means of numerical simulations, which take into account the presence of uncertainty in the plant model and external disturbances. The obtained results show that the proposed pre-tuning method for multivariable PID controller is robust with respect to: a) parametric uncertainty in the plant model, b) disturbances acting at the plant input, c) sensors measurement and estimation errors.

3D bioprinting, like 3D printing, is a process that builds structures by depositing material layer by layer. In the specific case of bioprinting, these layers are composed of a biocompatible material together with living cells, allowing the creation of three-dimensional structures that recreate functional tissues and organs. Bioprinting cell-laden structures is complicated by the high rate of cell damage and stress that occurs during the process, caused by the high pressures and stresses to which they are subjected. To minimise damage during the process, it is important to study and optimise certain bioprinting conditions beforehand and to analyse how they affect the cells by means of computational simulations. In this review, both quantitative and qualitative data are collected to improve the nozzle geometry through computational simulation studies. Optimal ranges for nozzle diameter (0.2-1mm) and length (8-10mm; 300-900μm) have been defined, and recommendations for improving nozzle performance during bioprinting, such as the provision of an inner angle of 20-30°, an inner EDTA coating and a shear stress of less than 10kPa, have been gathered. Finally, based on the data collected, a design of experiments is proposed to obtain an optimal bioprinting configuration for a particular bioink.

Since the 1960s Rare earths (REs) applications gradually have expanded to everyday life. REs have great strategic importance in industrial and technological development, so it is expected an increase in their demand. Among the REs the European Commission considered Cerium and Lanthanum as critical raw materials. This research article studies the adsorption of Ce and La onto two carbon nanomaterials, multiwalled carbon nanotubes (MWCNT) and carboxylic functionalized multiwalled carbon nanotubes (MWCNT_ox). The latter has slightly more affinity for REs than MWCNT. The recovery percentage for Ce were 89 and 98% and in the case of for La were 99 and 92% using 0.8 g of MWCNT and 0.2 g of MWCNT_ox respectively. The adsorption process fits a pseudo second-order kinetic model and the Langmuir isotherm best represented the metal uptake.

We present a new post-processing method for Quantum Key Distribution (QKD) that raise cubically the secret key rate in the number of double matching detection events. In Shannon’s communication model information is prepared at Alice’s side then it is intended to pass it over a noisy channel. In our approach, secret bits do not rely in Alice’s transmitted quantum bits but in Bob’s basis measurement choices. Therefore measured bits are publicly revealed while bases selections remain secret. Our method implements sifting, reconciliation and amplification in a unique process, it just require a round iteration, no redundancy bits are sent and there is no limit in the correctable error percentage. Moreover, this method can be implemented as a post processing software into QKD technologies already in use.

By the use of the tertiary amine A327 and 1 M HCl solution as precursors, the ionic liquid A327H+Cl- was generated and used to investigate its performance in the transport of Au(III) form hydrochloric acid medium. The influence of the stirring speed (600-1800 min-1), ionic liquid concentration (1.25-50% v/v) in the membrane phase and gold concentration (0.01-0.15 g/L) in the feed phase on metal transport have been investigated. An equation which included both equilibrium and kinetics parameters was derived, and the membrane diffusional resistance (Δm) and feed phase diffusional resistance (Δf) was estimated as 9.5x106 s/cm and 307 s/cm, respectively. At carrier concentrations in the 5-50% v/v range and gold concentrations in the 0.01-0.15 g/L range, metal transport is controlled by diffusion of metal species through the feed boundary layer, whereas at the lowest carrier concentrations, membrane diffusion is predominant. From the receiving solutions, gold can be recovered as gold nanoparticles.

Physical symptoms are defined as symptoms for which adequate examination does not reveal a sufficient underlying root cause, e.g., pain and fatigue. The extant literature of the neurobiological underpinnings of physical symptoms has been largely inconsistent and primarily consists of (clinical) case-control studies with relatively small samples sizes. Therefore, we studied the association of brain morphology with physical symptoms in pre-adolescents from two independent and population-based cohorts. This study included 2,683 individuals from the Generation R Study (51% girls, 10.1 ± 0.6 years old) and 10,567 pre-adolescents from the ABCD Study (48% girls, 9.9 ± 0.6 years old). High- resolution structural magnetic resonance imaging (MRI) was collected using 3-Tesla MRI systems. Physical symptoms were evaluated using the somatic complaints syndrome scale from the parent-reported school-age version of the Child Behavior Checklist. Linear regression models were fitted for global brain metrics (i.e., cortical and subcortical grey matter volume and total white matter volume) as well as surface-based vertex-wise measures (surface area and cortical thickness). Analyses were initially conducted separately in each cohort and later meta-analysed. No associations were observed in either cohort separately. In the combined vertex-wise meta-analysis of both cohorts; the right hemisphere surface area, most notably the rostral middle frontal gyrus, superior frontal gyrus and anterior cingulate cortex, were related to physical symptoms after correcting for multiple comparisons (cluster area = 1,882 mm2). The present study, which is the most representative and well-powered to date, suggests that surface area, but not other measures of brain morphology, are modestly related to physical symptoms in pre- adolescents. While these effects are subtle, future longitudinal research is warranted to elucidate whether such associations indicate a cause or a consequence of the physical symptoms.

The Puuc Biocultural State Reserve (PBSR is an unique model for tropical dry forest conservation in Mexico. Preserving forest biodiversity and carbon within the PBSR depends on the mainte-nance of low impact productive activities coordinated by multiple communal and private land-owners. In this study, we used state-of-the-art remote sensing data to investigate past spatial patterns in forest clearing dynamics and its relation to forest carbon density and forest plant species richness and diversity in the context of the forest conservation goals of the PBSR. We used a Landsat-based continuous change detection product for the 2000-2021 period and compared it to carbon density and tree species richness models generated from ALOS-2 PALSAR 2 imagery and national scale forest inventory data. The estimated error-adjusted area of detected annual forest clearings from the year 2000 until the year 2021 was 230,511 ha in total (+19,979 ha). The analysis of annual forest clearing frequency and area suggests that although forest clearing was significantly more intensive outside of the PBSR than within the PBSR during the entire 2000-2021 period, there is no evidence suggesting that the frequency and magnitude of forest clearing has changed over the years after the creation of the PBSR in 2011. An emergent hotspot analysis shows, however, that high spatiotemporal clustering of forest clearing events (hotspots) during the 2012-2021 pe-riod was less common than prior to 2011 and these more recent hotspots have been confined to areas outside the PBSR. After comparing forest clearing events to carbon density and tree species richness models, results show that land owners outside the PBSR often clear forests with lower carbon density and species diversity than land owners inside the PBSR. This suggests that, compared to land owners outside the PBSR, land owners within the PBSR might be practicing longer fallow periods allowing forests to attain higher carbon density and tree species richness and hence better soil nutrient recovery after land abandonment. In conclusion, our results show that the PBSR effectively acted as a stabilizing forest management scheme during the 2012-2021 period minimizing the impact of productive activities by lowering the frequency of forest clearing events and preserving late secondary forests within the PBSR. We recommend the continuation of efforts for providing alternative optimal field data collection strategies and modeling techniques to spatially predict key tropical forest attributes. The combination of these models with contin-uous change detection datasets will allow to reveal underlying ecological processes and generate information better adapted to forest governance scales.

The health benefits of extra virgin olive oil (EVOO) are related with its chemical composition and the presence of bioactive compounds with antioxidant properties. The aim of this study was evaluate antioxidant compounds (pigments, CoQ10 and phenolic compounds) and antioxidant properties of EVOO from the same region comparing different cultivars (Hojiblanca and Arbequina), harvest year and crop stage. Antioxidant properties of oils were studied before and after a gastrointestinal digestion process, by in vitro assays (DPPH, ABTS and FRAP) and antioxidant markers in Caco-2 cells (reactive oxygen species production). The content of bioactive compounds measured was significantly affected by cultivar and harvest year (except for carotenoids) and by the crop stage (except for coenzyme Q10). Higher amount of coenzyme Q10 was observed in Hojiblanca than in Arbequina EVOO. Total phenol content and antioxidant properties were also different depending on cultivar and harvest year and the in vitro digestion process strongly improved antioxidant marker values. Antioxidant potential in bioaccessible fractions was mainly related with content of coenzyme Q10 and phenolic compounds in EVOO. Chemometric analysis showed that the oils were clearly classified by cultivars, harvest and crop stage, according with chemical composition and antioxidant activity analyzed in the present study

Large datasets play a crucial role in the progression of surgical robotics, facilitating advancements in the fields of surgical task recognition and automation. Moreover, public datasets enable the comparative analysis of various algorithms and methodologies, thereby assessing their effectiveness and performance. The ROSMA (Robotics Surgical Maneuvers) dataset provides 206 trials of common surgical training tasks performed with the da Vinci Research Kit (dVRK). In this work, we extend ROSMA dataset with two annotated subsets: ROSMAT24, which contains bounding box annotations for instrument detection, and ROSMAG40, which contains high and low level gesture annotations. We propose an annotation method that provides independent labels for the right-handed tool and the left-handed tool. For instrument identification, we validate our proposal with a YOLOv4 model in two experimental scenarios. We demonstrate the generalization capabilities of the network to detect instruments in unseen scenarios. For gesture segmentation, we propose two label categories: high-level annotations that describe gestures at a maneuvers level, and low-level annotations that describe gestures at a fine-grain level. To validate this proposal, we have designed a recurrent neural network based on a bidirectional long-short term memory layer. We present results for four cross-validation experimental setups, reaching up to a 77.35% mAP.

Background: Recent advances allow the usage of Augmented Reality (AR) for many medical procedures. We perform different AR-assisted knee surgery techniques using optical surgical navigation with ArUco-type artificial marker sensors. Our study aimed to evaluate the system’s accuracy using an in vitro protocol. We hypothesised that the system’s accuracy was equal to or less than 1mm and 1° for distance and angular measurements, respectively. Methods: Our research was an in-vitro laboratory with a 316 L steel model. We evaluated absolute reliability according to the Hopkins criteria with seven independent evaluators. Each observer measured the thirty palpation points and the trademarks to acquire direct angular measurements on three occasions separated by at least two weeks. Results: The accuracy of the system to assess distances had a mean error of 1.203mm and an un-certainty of 2.062, and for the angular values, a mean error of 0.778° and an uncertainty of 1.438. The intraclass correlation coefficient was for all intra-observer and inter-observer almost perfect or perfect. Conclusions: The mean error for the distance’s determination has been statistically larger than 1mm (1.203mm) but with a trivial effect size. The mean error assessing angular values was sta-tistically minor than 1°. Our results are similar to those published by other authors in accuracy analyses of AR systems.

Biocomposite membranes based on polylactic acid (PLA) and cellulose nanocrystals (CNCs) were developed using a scientific approach. Dicumyl peroxide (DCP) was used as a polymerization ini-tiator, while tin octoate (Sn(Oct)2) and triphenylphosphane (P(C6H5)3) were used as catalysts. A torque rheometer was used to mix the components of the biocomposite, and thin films was prepared by solvent casting. Fourier transform infrared (FTIR) spectroscopy confirmed the coupling between the PLA and CNCs. Field emission scanning electron microscopy (FESEM) showed that the CNCs were well-dispersed in the PLA matrix with an unimodal particle size distribution and a maximum particle size of around 200 nm. Thermogravimetric analysis (TGA) and differential scanning calo-rimetry (DSC) analysis demonstrated good thermal stability and improved biodegradability of the biocomposite membrane compared to pure PLA. Mechanical characterization showed a Young's modulus of 1.65 GPa, which is comparable to that of other composite materials, and a maximum tensile strength of 20.31 MPa, which is higher than that of pure PLA. These results suggest that the developed biocomposite membrane has potential applications in water filtration, food packaging, and biomedical devices.

CO₂ geological storage in deep saline aquifers was recently developed at industrial scale mainly in sandstone formations. Experiences on CO₂ injections in carbonates aquifers for permanent trapping are quite limited, mostly from US projects such as AEP Mountaineer, Michigan and Williston Basin. The behavior of fractures in carbonates plays a key role in those reservoirs in which porous matrix permeability is very poor, which drives the CO₂ plume migration through the fracture network where hydromechanics and geochemical effects take place due to injection. Hontomín (Spain) is the actual on-shore injection pilot in Europe (EP Resolution of 14 January 2014), whose reservoir is comprised of fractured carbonates. Existing experiences from field scale tests conducted on site have supported to better understand the behavior of this type of reservoirs for CO₂ geological storage. Innovative CO₂ injection strategies are being carried out in ENOS Project (EU H2020 Programme, http://www.enos-project.eu). First results based on field tests conducted at Hontomín, and the advanced modelling developed so far will be analyzed and discussed in this article, as well as, the description of future works. The evolution of operating parameters such as flow rate, pressure and recovery term during the tests confirm the CO₂ migration through the fractures.

Based on a measuring system to determine levels of spatial organization in 2D polygons (homogeneous or heterogeneous partition of defined areas) lying on principles of regularity, we propose the entropy term linked to the concept of “information”, from the “information theory field”, in order to obtain an information measurement regarding a quantity of or amount of information in the architecture of complex 2D biological organizations. The term “quantity” does not refer to the amount of data (size), but to the probability of a geometrical basic pattern within a set of possible statistical configurations regarding levels of homogeneity and heterogeneity. It is this notion of information that is important in information theory, and measures of information in units of bits, what we propose to use for measuring quantities of organization in the architecture of complex geometrical systems. Two complex systems are tested, biological and non biological in order to obtain experimental results, which are verified with the evaluation criteria “entropy”. Experimental results show that the lowest levels of information and entropy, in addition with low rates of heterogeneity and high rates of homogeneity are particular features of geometrical organizations in biological systems.

Gestational diabetes mellitus (GDM) pathophysiology comprises clinical and genetic factors. In fact, GDM has been associated with several single nucleotide polymorphisms (SNPs). This study aimed to build a prediction model of GDM combining clinical and genetic risk factors. A total of 1588 pregnant women from the San Carlos Cohort participated in the present study, 1069 (67.3%) Caucasian (CAU) and 519 (32.7%) Latin American (LAT), 255 (16.1%) with GDM. The incidence of GDM was similar in both groups (16.1% CAU and 16.0% LAT). Genotyping was performed by IPLEX Mass ARRAY PCR selecting 110 SNPs based on literature references. The SNPs showing the strongest likelihood of GDM development were the rs10830963, rs7651090 and rs1371614 in CAU and rs1387153 and the rs9368222 in LAT. Clinical variables including age, pre-pregnancy body mass index and fasting plasma glucose (FPG) at 12 gestational weeks predicted the risk of GDM (AUC 0.648, 95%CI 0.601-0.695 in CAU; AUC 0.688, 95%CI 0.628-9.748 in LAT) and adding the SNPs modestly improved prediction (AUC 0.722, 95%CI 0.680-0.764 in CAU; AUC 0.769, 95%CI 0.711-0.826 in LAT). In conclusion, adding genetic variants enhanced the prediction model of GDM risk in CAU and LAT pregnant women. An RCT is underway to demonstrate its usefulness

The fast pace development of the Internet and the Coronavirus Disease (COVID-19) pandemic have impacted considerably on the educative sector; encouraging the constant transformation of the teaching-learning strategies and more in technological areas as Educational Software Engineering. Web programming, a fundamental topic in Software Engineering and Cloud-based applications, deals with various critical challenges in education, such as learning continuous emerging technological tools, plagiarism detection, generating innovative learning environments, among others. Continual change and more with the current digitization becomes a challenge for teachers and students who cannot depend on traditional educational methods. The article presents a sustainable teaching-learning methodology for web programming courses in Engineering Education using a project-based integrated approach adaptable to the continuous web technological advances. The methodology has been developed and improved for 9 years, 15 groups, and 3 different universities. Our results demonstrate that the methodology is 100% adaptable with new technologies that might arise; it also presents the advantages of avoiding plagiarism in the best case and a personalized induction for every specific student in the learning process.

In this article, we first present and discuss eighteenth-century descriptions of minerals that contributed decisively to the development of crystallography. Remarkably, these old crystallographic descriptions included morphologies with symmetries incompatible with an internal periodic order of atoms, which, however, have been recognised to be characteristics of quasicrystals. Moreover, we also review a number of studies of minerals with aperiodic crystal structures, including recently reported natural quasicrystals of extra-terrestrial origin. Finally, we discuss the current investigations addressing the search for new quasicrystalline minerals in nature.

Sr4Al6O12SO4 samples were obtained from the compound mixture formed by a solid–state reaction of Al2O3, SrSO4, and SrCO3. Samples were compacted at 100MPa to form pellets of 1 and 4cm in diameter and were sintered at 1400°C for 4 hours. The compound was analyzed by X–ray diffraction. Static immersion and wettability tests were performed to evaluate corrosion resistance in contact with Al–Si. Corrosion tests were carried out by immersion at 800, 900, and 1000°C for 24, 50, and 100 hours, while wettability was carried out at 900, 1000, and 1100°C for 2 hours. Subsequently, the samples were prepared metallographically. Samples were analyzed by optical microscopy, scanning electron microscopy, and image analysis. In general, reaction products consisting of alumina, spinel, oxides, and sulfates were found. The contact angles obtained were 124° to 135°. It is concluded that ceramic substrate Sr4Al6O12SO4 is resistant to corrosion by Al–Si alloy, since the slight thickness of the reaction products found in the samples (100μm) considering the severe conditions of the experiment: 1000°C and 100 hours of isothermal temperature. Furthermore, it can be said that Sr4Al6O12SO4 is not wettable by Al–Si alloys.

The mucopolysaccharidoses (MPS) are a group of 11 lysosomal storage diseases (LSDs) produced by mutations in the enzymes involved in the lysosomal catabolism of glycosaminoglycans. Most of the mutations affecting these enzymes may lead to changes in processing, folding, glycosylation, pH stability, protein aggregation, and defective transport to the lysosomes. The use of small molecules, called pharmacological chaperones (PCs), that can restore the folding, trafficking and biological activity of mutated enzymes has been extensively explored in LSDs as a therapeutic alternative. PCs have the advantage of wide tissue distribution, potential oral administration, lower production cost, and fewer issues of immunogenicity. In this paper, we will review the advances in the identification and characterization of PCs for the MPS. These molecules, mainly based in molecules mimicking the enzyme substrates, have been described for MPS II, IVA, and IVB, showing a mutation-dependent enhancement of the mutated enzymes. Although the results show the potential of this strategy, further studies should focus in the development of disease-specific cellular models that allow a proper screening and evaluation of the identified PCs. In addition, in vivo evaluation, both pre-clinical and clinical, should be performed, before they can become a real therapeutic strategy for the treatment of MPS patients.

Preparation of a low-cost cellulose-based bioadsorbent from the cellulosic material extracted from the rose stems (CRS) was carried out; rose stems were considered agricultural wastes. After the required pretreatment of this waste, and its further treatment with an acidic mixture of acetic and nitric acids, the CRS product was yielded. The resulting bioadsorbent was characterized by several techniques, such as X-ray diffraction, which revealed diffraction maxima related to cellulose structure, whose calculated crystallinity index (CrI) was 75 %. In addition, Fourier Transform Infrared spectroscopy (FTIR), 13C Nuclear Magnetic Resonance (NMR), and X-ray Photoelectron Spectroscopy (XPS) showed signs of acetylation of the sample, also, the thermal properties of the solid was evaluated through Thermogravimetric Analysis (TGA). Scanning Electron Microscopy (SEM) showed cellulose fibers before and after the adsorption process, some particles with not regular shapes were also observed. The CRS bioadsorbent was used in the effective adsorption of valuable Tb(III) from aqueous solution. The adsorption data resulted in a better fit to the Freundlich isotherm, and pseudo-second-order kinetic models; however, chemisorption had not been ruled out. Finally, desorption experiments revealed a recovery of terbium ions with an efficiency of 97 % from terbium-loaded bioadsorbent.

Demand for niobium and tantalum is increasing exponentially as these are essential ingredients for the manufacture of, among others, capacitors in technological devices and ferroniobium. Mine tailings rich in such elements could constitute an important source of Nb and Ta in the future and so alleviate potential supply risks. This paper evaluates the possibility of recovering niobium and tantalum from the slags generated during the tin beneficiation process of mine tailings from the old Penouta mine, located in Spain. To do so, a simulation of the processes that would be required to beneficiate and refine both elements is carried out. After tin carbothermic reduction, the slags are sent to a hydrometallurgical process where at the end niobium oxide and tantalum oxide are obtained. Reagents, water and energy consumption, in addition to emissions, effluents and product yields are assessed. Certain factors were identified as critical, and recirculation was encouraged in the model to maximize production and minimize reagents use and wastes. With this simulation, considering 3000 production hours per year, the metal output from the tailings of the old mine could cover around 1% and 7.4% of the world annual Nb and Ta demand, respectively.

This paper shows the development of a simultaneous tri-band (S: 2.2 - 2.7 GHz, X: 7.5 - 9 GHz and Ka: 28 - 33 GHz) low-noise cryogenic receiver for geodetic Very Long Baseline Interferometry (geo-VLBI) which has been developed by the technical staff of Yebes Observatory (IGN) laboratories in Spain. The receiver was installed in the first radio telescope of the Red Atlántica de Estaciones Geodinámicas y Espaciales (RAEGE) project, which is located in Yebes Observatory, in the frame of the VLBI Global Observing System (VGOS). After this, the receiver was borrowed by the Norwegian Mapping Autorithy (NMA) for the commissioning of two VGOS radiotelescopes in Svalbard (Norway). A second identical receiver was built for the Ishioka VGOS station of the Geospatial Information Authority (GSI) of Japan, and a third one for the second RAEGE VGOS station, located in Santa María (Açores Archipelago, Portugal). The average receiver noise temperatures are 21, 23 and 25 Kelvin and the measured antenna efficiencies are 70%, 75% and 60% in S-band, X-band and Ka-band, respectively.

Tuberculosis (TB) caused by Mycobacterium tuberculosis remains a predominant cause of mortality, especially in low- and middle-income nations. Recently antimicrobial peptides were discovered that at low concentrations could stimulate the growth of M. tuberculosis (hormetic response). In this study, such a peptide was used to investigate the effects on the time to positivity (TTP). A systematic substitution analysis of peptide 14D was synthesized using Spot synthesis technology, resulting in 171 novel peptides. Our findings revealed a spectrum of interactions, with some peptides accelerating M. tuberculosis growth, potentially aiding in faster diagnostics, while others exhibited inhibitory effects. Notably, peptide NH2-wkivfiwrr-CONH2 significantly reduced the TTP by 25 hours compared to the wild-type peptide 14D, highlighting its potential in improving TB diagnostics by culture. Several peptides demonstrated potent antimycobacterial activity, with a minimum inhibitory concentration (MIC) of 20 µg/mL against H37Rv and a multidrug-resistant M. tuberculosis strain. Additionally, a reduction in the formation of cord-like structures was observed, which is indicative of reduced virulence and transmission potential. This study underscores the multifaceted roles of antimicrobial peptides in TB management, from enhancing diagnostic efficiency to offering therapeutic avenues against M. tuberculosis.

This article presents the copper ions adsorption process using an activated carbon from winemaking wastes. The pH, temperature, activated carbon amount and initial copper concentration were varied based on a full factorial 2^k experimental design. Kinetic and thermodynamic studies were also carried out. The adsorption kinetics was found follow a pseudo-second-order model. The adsorption data fit better to the Langmuir isotherm. The ANOVA demonstrated that both pH of the solution and activated carbon dosage had the greatest influence on copper adsorption. The activation energy was -32 kJ·mol^-1 suggesting that the copper adsorption is a physic-sorption process. The best fit to a linear correlation was the moving boundary equation that controls the kinetics for the adsorption copper ions onto the activated carbon. The X-ray photoelectron spectroscopy (XPS) results reveal the existence of different copper species (Cu²⁺, Cu⁺ and or Cu⁰) on the surface of the carbonaceous adsorbent after the adsorption, which could suggest a simultaneous reduction process.

This review presents an updated overview of research concerning Leishmania protein structures, primarily sourced from the Protein Data Bank (PDB), that play a role in the metabolic pathways of the Leishmania parasite. Furthermore, we assess the current progress in the identification and development of bioactive chemical agents aimed at addressing this substantially overlooked tropical disease. We have analyzed experimental data obtained from in vitro, in vivo and in silico sources. This data has been categorized into four main areas: a) vector taxonomy and geographic distribution; b) parasite taxonomy and geographic distribution; c) enzymatic functions of proteins engaged in parasite/host interactions throughout various developmental stages (such as oxidoreductases, transferases, hydrolases, lyases, isomerases, ligases, and cytokines); and d) established and experimental treatments employing bioactive chemical compounds. Our objective is to establish a foundational point of reference for research efforts concentrating on the elucidation of interaction mechanisms and the processes of ligand-protein activation/inactivation, specifically linked to Leishmania infections. Consequently, we emphasize enzymes recognized for their involvement in the biochemical pathways incited during Leishmania infection episodes. This review encapsulates the current understanding, offering insights to inform and direct future explorations aimed at targeting proteins and pathways to enhance the management of Leishmania-related diseases.

The behaviour of oxidized and non-oxidized multiwalled carbon nanotubes in the adsorption of lanthanum(III) from aqueous solutions is described. Metal uptake is studied as a function of several variables such as the stirring speed of the system, pH of the aqueous solution and metal and nanomaterial concentrations. The experimental results are fitted to various kinetics and isotherm models, being the rate law fitted to the film diffusion and particle diffusion models, when the non-oxidized and the oxidized nanomaterials are used to remove lanthanum from the solution, respectively. Sulphuric acid solutions seem to be appropriate to recover the metal from La-loaded nanomaterials.

The ability to self-direct a research program determines graduate degree completion. Yet, research on incompletion of graduate physics programs assume students’ present level of self-direction adequate and neglects to recognize a lack of self-directed learning as key. One theoretical mathematical physicist focused on changing this challenge of physics graduate education by promoting self-directed learning through the type research flow that has been found to bring the greatest satisfaction to researchers with respect to their insights. This he provided through his space, time, open mindedness and theoretical contributions with his students and in collaboration with his colleagues. A self-directed learner himself, David J. Rowe developed methods of mentoring for encouraging physics graduate students to recognize symmetry as valuable in identifying solutions to problems quickly—helping these students take the lead in finding insightful resolutions to complex, multidimensional, mathematical physics uncertainties. How Rowe set about supporting self-directed learning in his graduate physics education interactions will be examined with the use of narrative research to interpret the texts and conversations with the author he made available. His techniques will be presented and recommendations made regarding how Rowe’s work in this regard can be modeled to improve self-direction in STEM graduate education.

Objective. To test the hypothesis that a session of unilateral tSMS over the dominant primary motor cortex (M1) in healthy subjects produces a transient decrease in manual dexterity. Methods. A triple-blinded randomized control trial was conducted in 40 healthy participants who were allocated to real- or sham-tSMS group. Each participant underwent one session of tSMS and were assessed before, immediately after, 15 minutes, and 40 minutes after stimulation. Outcome measures were Finger Tapping Test (FTT), 5-seconds FTT, nine Hole Peg Test, and the hand grip assessment. Results: Significant differences were found between groups 15 minutes after stimulation in favor of the tSMS group in the FTT (2.2 ± 0.99; CI= .18-4.22; d= .84p=.034), and 5-second FTT (4.2 ± 1.98; CI= .199-8.2, d= .68; p=.04). In the intragroup analysis, a significantly lower number of taps 15 minutes after stimulation was observed in sham group (3.3 ± 1.01; CI= .47-6.13; d= .42; p=.015), but not in the real stimulation group. Conclusion: A unilateral session of tSMS in the M1 of the dominant hemisphere of healthy individuals does not reduce manual dexterity or grip strength. This technique could have benefits on the motor performance of the arm contralateral to the stimulated motor cortex

Maze navigation using one or more robots has become a recurring challenge in scientific literature and real life practice, with fleets having to find faster and better ways to navigate environments such as a travel hub (e.g. airports) or to evacuate a disaster zone. Many methods have been used to solve this issue, including the implementation of a variety of sensors and other signal receiving systems. Most interestingly, camera-based techniques have increasingly become more popular in this kind of applications, given their robustness and scalability. In this paper, we have implemented an end-to-end strategy to address this scenario, allowing a robot to solve a maze in an autonomous way, by using computer vision and path planning. In addition, this robot shares the generated knowledge to another by means of communication protocols, having to adapt its mechanical characteristics to be able to solve the same challenge. The paper presents experimental validation of the four components of this solution, namely camera calibration, maze mapping, path planning and robot communication. Finally, we present the integration and functionality of these methods applied in a pair of NAO robots.

Malnutrition is a serious problem with negative impact on the quality of life and the evolution of our patients, contributing to an increase in morbidity, hospital stay, mortality and health spending. Early identification is fundamental to implement the necessary therapeutic actions involving adequate nutritional support to prevent or reverse malnutrition. This review presents two complementary methods of fighting malnutrition: nutritional screening and nutritional assessment. Nutritional risk screening is conducted using simple, quick-to-perform tools and is the first line of action in detecting at-risk patients. It should be implemented systematically and periodically on admission to hospital or residential care, as well as on an outpatient basis for patients with chronic conditions. Once patients with a nutritional risk have been detected they should undergo a more detailed nutritional assessment to identify and quantify the type and degree of malnutrition. This should include health history and clinical examination, dietary history, anthropometric measurements, evaluation of the degree of aggression determined by the disease, functional assessment and, whenever possible, some method of measuring body composition.

Background: Understanding the trophic ecology of threatened freshwater fishes is relevant to managing their conservation. The genus Orestias is endemic to the Andes region and shows great biogeographical interest in the Neotropics due to its adaptation to the high-altitude systems of the Andes as well as because several species are considered threatened. (2) Methods: Here, we synthesize the documented trophic interaction of Orestias spp. in freshwater ecosystems of the Andes region available in the literature and use available data to explore the trophic interaction of Orestias species via null models. (3) Results: Our findings showed that Orestias spp. consume a wide range of prey (i.e., mainly aquatic insects, crustaceans, and mollusks) that varied according to their habitats and feeding morphology. The null model revealed that species associations in diet were random because of the presence of many repeated species. Our results would reveal that some Orestias spp. may show an opportunistic feeding strategy that concurs with previous reports. Additionally, we highlight major information gaps associated with the trophic ecology of Orestias spp. and propose some direction for future studies. (4): Our study provides valuable in-formation on Orestias spp. trophic ecology, which may be useful for developing conservation strategies for native fish in the Neotropical region.

Agriculture is the main driver of depletion resources worldwide, and its duty is to ensure food security within a rapidly increasing demographic and urbanization, so it is important to transition to sustainable production systems. Vertical crops (VCs) can reduce the pressure on conventional agriculture because they save water and nutrients and increase crop yield. Therefore, this study aimed to validate a proposed predictive model (PM) to simulate water and nutrient uptake in vertical crops under greenhouse conditions. Based on the Penman-Monteith equation, PM estimates transpiration, while nutrient uptake was estimated using the Carmassi-Sonneveld submodel. PM was experimentally evaluated for vertically grown lettuce under Mediterranean greenhouse conditions, during spring 2023. The irrigation technique was a closed-loop fertigation circuit. The experimental consisted of testing two densities (50 and 80 plants·m-2), where each unit of the experiment unit was divided into three heights (low, medium, and upper). It performed ANOVA with a value of p < 0.05 and R2 to assess PM performance. The results suggest a high degree of PM, since R2 ranged from 0.7 to 0.9 for the uptake of water and nutrients. Both densities had a yield between 17-20 times higher than conventional lettuce production and significant savings in water, between 85-88%. In this sense, PM has great potential to intelligently manage VC fertigation, saving water and nutrients, which represents an advance towards reaching SDG 6 and SDG 12, within the 2030 Agenda.

An easier method for the calibration of differential drive robots is presented. Most of the calibration is done on-board and it is not necessary to expend too much time taking note of the robot's position. The calibration method does not need a big free space to perform the tests. The bigger space is just in a straight line, which is easy to find. Results with the proposed method are compared with those from UMB as a reference, and they show very little deviation while the proposed calibration is much simpler.

A frequent problem in Geotechnics is the soils with inadequate physical-mechanical properties before the efforts to which they will be subjected by the constructions, incurring cost overruns caused by their engineering improvement. The need to improve the engineering properties of soils is not recent, currently observing that the most common alternatives are binders such as cement and lime. The climate change observed in recent decades and the uncontrolled emission of greenhouse gases have motivated Geotechnical and Geoenvironmental researchers to seek mechanisms for soil reinforcement from a more sustainable and environmentally friendly approach by proposing the use of recycled and waste materials. An alternative is natural fibers, which can be obtained as waste from many agro-industrial processes, implying their high availability and low cost. Sawdust as a by-product of wood processing has a rough texture that can generate high friction between the fiber and the matrix of the soils, leading to a significant increase in its shearing strength and bearing capacity. This concept of improving the properties of soils using natural fibers distributed randomly is inspired by the natural phenomenon of grass and/or plants that when growing on a slope can effectively stabilize a said slope.

As a hazardous waste, pickling waste liquor must be properly treated. An alternative consists in promoting the formation of ferrous salts from this residue, due to its higher ferrous content. Since FeCl2·4H2O is widely used in several applications, obtaining pure crystals of this material appears to be an interesting prospect. However, this compound has scarcely been investigated. In the present work, FeCl2·4H2O crystals have been obtained from pickling waste liquors. Their structural and morphological characteristics have been investigated by X-ray diffraction, scanning electron microscopy as well as Mössbauer spectroscopy. In addition, the photoluminescence study of the obtained samples was also assessed. It was observed that after some aging time, the obtained crystals change in colour from green to more yellowish. So, the aged sample has also been evaluated, and their structural characteristics are compared with the original crystals. Despite this, the obtained crystals exhibit a FeCl2·4H2O structure, which is not modified with the aging of the sample.

The abundant use of lithium-ion batteries (LIBs) in a wide variety of electric devices and vehicles will generate a large number of depleted batteries, which contain several valuable metals such as Li, Co, Mn, and Ni present in the structure of the cathode material (LiMO2). The present work investigates chemical, technological, and environmental aspects in the treatment of such wastes, development of a methodology for the extraction of lithium, cobalt, nickel, manganese, and graphite by a carbochlorination pyrometallurgical process. Mixtures of cathode and anode materials (called black mass, mixed oxides of Li, Co, Ni, Mn, and graphite) from different LIBs, carbon black (as reducing agent), and CaCl2 (as chlorinating agent) were used. Non-isothermal thermogravimetric tests up to 850°C and isothermal tests at 700°C of the mixtures in an inert atmosphere were carried out. It was experimentally observed that the LiMO2-C-CaCl2 reaction takes place at 700°C. LiCl, Ni, and Co were obtained as final products, and to a lesser extent, CoO, NiO, and MnO2. CaCO3 was also obtained as a by-product. The obtained results show that carbochlorination is an efficient and effective alternative route for the extraction and recovery of metals from different LIBs, focused on the sustainability and circular economy

This study introduces a Fiber Specklegram Sensor (FSS) design for temperature measurement utilizing a single-multi-single mode optical fiber configuration. FSS technology offers unique advantages for potential development into portable sensing systems. This investigation explores an FSS design compatible with miniaturization by optimizing the interrogation system based on the relationship between speckle grain size and filtering fiber area. Temperature variations are detected through fluctuations in optical power at the sensor output, offering a simple and reduced interrogation scheme. The performance of the FSS is assessed through post-calibration measurements compared to a commercial Fiber Bragg Grating (FBG) sensor, demonstrating comparable results. These findings pave the way for compact and portable fiber optic temperature sensing systems leveraging FSS advantages while maintaining compatibility with established fiber optic measurements.

Background. Currently, most of the research in breast cancer has been carried out in conventional two-dimensional (2D) cell culture due to its practical benefits, however, the three-dimensional (3D) cell culture is becoming the model of choice in cancer research because it allows cell-cell and cell-extracellular matrix (ECM) interactions, mimicking the native microenvironment of tumors in vivo. Methods. in this work, we evaluated the effect of 3D cell organization on the expression pattern of miRNAs (by Small-RNAseq) and mRNAs (by microarrays) in the breast cancer SKBR3 cell line and analyzed the biological processes and signaling pathways regulated by the differ-entially expressed protein-coding genes (DE-mRNAs) and miRNAs (DE-microRNAs) found in the organoids. Results. We obtained well-defined cell-aggregated organoids with a grape cluster-like morphology with a size up to 9.2×105 μm3. The transcriptomic assays showed that cell growth in organoids significantly affected (all p < 0.01) the gene expression patterns of both, miRNAs and mRNAs, finding 20 upregulated and 19 downregulated DE-microRNAs, as well as 49 upregulated and 123 downregulated DE-mRNAs. In silico analysis showed that a subset of 11 upregulated DE-microRNAs target 70 downregulated DE-mRNAs. These genes are involved in 150 gene on-tology (GO) biological processes such as regulation of cell morphogenesis, regulation of cell shape, regulation of canonical Wnt signaling pathway, morphogenesis of epithelium, regulation of cy-toskeleton organization, as well as in the MAPK and AGE-RAGE signaling KEGG-pathways. In-terestingly, hsa-mir-122-5p (Fold Change (FC)=15.4), hsa-mir-369-3p (FC=11.4), and hsa-mir-10b-5p (FC=20.1) regulated up to the 81 % of the 70 downregulated DE-mRNAs. Conclu-sion, the organotypic 3D cell-organization architecture of breast cancer SKBR3 cells impacts the expression pattern of miRNAs-mRNAs network mainly through overexpression of hsa-mir-122-5p, hsa-mir-369-3p, and hsa-mir-10b-5p. All these findings suggest that the interaction between cell-cell and cell-ECM as well as the change in the culture architecture impacts gene ex-pression, and therefore, support the pertinence of migrating breast cancer research from conven-tional cultures to 3D models.

The utilization of inertial measurement units (IMUs) as wearable sensors is proliferating 1 across various domains such as healthcare, sports, and rehabilitation. This expansion is driven by 2 the continuous improvement of sensor technology to accommodate specific operational demands. 3 This paper introduces the development of a configurable wearable device capable of capturing both 4 high-frequency and low-frequency signals, tailored for a wide range of monitoring applications.Our 5 focus is on a comprehensive evaluation of the device in terms of deviation, noise levels, and precision. 6 We present initial findings that demonstrate the device’s robust performance, and put on the spotlight 7 the most critical optimizations needed to improve the device to reach the goal of a smart general-use 8 unit for human motion monitoring.

Twin pregnancies are highly undesirable in dairy cattle; they compromise the health and wellbeing of a cow, and its incidence dramatically impairs the farm economy. Recently, a genomic prediction for twin pregnancies has been developed. The objective of this study was to assess cow, environmental and management risk factors affecting the incidence of twin pregnancies in high-producing dairy cows in their first lactation, with special emphasis placed on the genomic prediction values for twin pregnancy. Our study population of primiparous cows proved valuable in identifying factors other than genomic predictive values influencing the twin pregnancy rate. The odds ratio for twin pregnancy was 0.85 (p &lt;0.0001) for each unit of a prediction value increase, 3.5 (p = 0.023) for cows becoming pregnant during the negative photoperiod, and 0.33 (p = 0.016) for cows producing ≥42 kg of milk at AI, compared to the remaining cows producing &lt;42kg of milk. As a general conclusion, the practical implication of our findings is that genomic prediction values can identify the risk of twin pregnancy at herd level. Given the cumulative effect of genomic selection, selecting for animals with reduced genetic risk of twin pregnancies can contribute to reduce its incidence in dairy herds.

Research on healthy ageing shows that lifespan reductions are often caused by mitochondrial dysfunction. Thus, it is very interesting that the deletion of mitochondrial matrix peptidase LonP1 was observed to abolish embryogenesis, while deletion of the mitochondrial matrix peptidase ClpP prolonged survival. To unveil the targets of each enzyme, we documented the global proteome of LonP1^+/- mouse embryonal fibroblasts (MEF), for comparison with ClpP^-/- depletion. Proteomic profiles of LonP1^+/- MEF generated by label-free mass spectrometry were further processed with the STRING webserver Heidelberg for protein interactions. ClpP was previously reported to degrade Eral1 as a chaperone involved in mitoribosome assembly, so ClpP deficiency triggers accumulation of mitoribosomal subunits and inefficient translation. LonP1^+/- MEF also showed Eral1 accumulation, but no systematic effect on mitoribosomal subunits. In contrast to ClpP^-/- profiles, several components of the respiratory complex I membrane arm were accumulated, whereas the upregulation of numerous innate immune defense components was similar. Overall, LonP1 as opposed to ClpP appears to have no effect on translational machinery, instead it shows enhanced respiratory dysfunction; this agrees with reports on the human CODAS syndrome caused by LonP1 mutations.

Predictive numerical models in the study of ground-borne vibrations generated by railway sys-tems have traditionally relied on the segmented approach of subsystems. In this approach, loads are individually applied, and the cumulative effect of rolling stock is obtained through superposi-tion. While this method serves to mitigate computational costs, it may not fully capture the com-plex interactions involved in ground-borne vibrations. Recent advancements in computational and software tools have enabled the development of more sophisticated vibrational pollution models. These advanced models encompass the entire dynamic system, from the rolling stock to the terrain, allowing for continuous simulations with a defined time step. Furthermore, the incorporation of computational contact tools between various ele-ments not only ensures temporal accuracy but also extends the analysis to the frequency domain. This paper explores the evolution of predictive numerical models in the context of ground-borne vibrations generated by trains on ballasted tracks. It highlights the shift from segmented models to continuous simulations, demonstrating the progressive advancement towards more comprehen-sive and accurate representations of railway-induced and generated vibrations in the track sur-roundings as an additional way of evaluate sustainability of infrastructures. In particular, this development of a numerical model from its inception aimed to expand upon ex-isting emission - prediction models by enriching the data with frequency-domain information. This approach has been driven by the aspiration to bridge the gap between numerical predictions and measured signals, striving for a higher level of accuracy in our obtained results. This model can predict the impact of a high-speed rail (HSR) vehicle passing on its own track. It possesses sufficient information in both the time and frequency domains to precisely characterize vibrations. This initiative marks a pivotal advancement, enabling us to more effectively capture the intricacies of ground-borne vibrations and their impact on the surrounding environment due to a deeper comprehension of the occurrences in the frequency domain, there's a heightened ca-pability to accurately characterize vibrations.

Background. Increasing evidence demonstrate that concentration of protein in infant formula >1.9g/100Kcal with high levels of insulinogenic aminoacids is associated with accelerated weight gain, increased fat mass accumulation and risk of adiposity. Purpose of this study was to conduct a systematic review to determine the metabolic effects in infants feed with infant formula optimized in protein. Methods. Systematic review was conducted according PRISMA Statement. RCTs with one intervention group (infant formula with 1.6-1.9gr of protein/100Kcal) and at least one comparative control group (infant formula with >1.9gr of protein/100Kcal) were included. Standardized mean differences (SMD), through random model were calculated. Results. 15 RCT were included. Optimized protein in infant formula was associated with less gain of BMI at 24 months of follow-up (SMD -0.25, IC95% -0.36 to -0.13, p 0.01) and less fat mass accumulation (SMD -0.68, IC95% -0.98 to -0.37, p 0.01). Optimized protein was also associated to less gain of weight, weight/age Z-score, weight/length Z-score, BUN (mmol/dL) and IGF1 (ng/ml). No effect on length/age Z-score was observed. Conclusions. Robust evidence showed optimized protein (1.6gr/100Kcal to 1.9gr/100Kcal) in infant formula is associated with metabolic benefits in infants with less weight gain, BMI and fat mass accumulation.

Polymethyl methacrylate (PMMA) polymer is widely used in various fields today. In order to thoroughly reveal the structural impact performance of PMMA materials, this paper is based on the comprehensive Johnson-Cook constitutive model and damage failure model, and accurately confirm the J-C constitutive and damage failure model parameters of PMMA through material test data, The dynamic process of steel bullet impacting PMMA plate structure is analyzed by finite element software ABAQUS. The calculation results show that the numerical simulation results in this paper are in good agreement with the experimental test data. Therefore, the feasibility and accuracy of the impact analysis of PMMA structures based on J-C constitutive and damage failure models in this paper are studied. Finally, based on the J-C constitutive model and damage failure model, the variation of the residual velocity of the bullet with the PMMA plate thickness is analyzed in depth, that is, the results show that the residual velocity of the bullet has a certain linear relationship with the plate thickness.

A large diversity of epigenetic factors, such as microRNAs and histones modifications, are known to be capable of regulating gene expression without altering DNA sequence itself. In particular, miR-1 is considered the first essential microRNA in cardiac development. In this study, miR-1 potential role in early cardiac chamber differentiation is analyzed through specific signaling pathways. For this, we performed in chick embryos functional experiments by means of miR-1 microinjections into the posterior cardiac precursors -of both primitive endocardial tubes- committed to sinoatrial region fates. Subsequently, embryos were subjected to whole mount in situ hybridization, immunohistochemistry and RT-qPCR analysis. As a relevant nov-elty, our results revealed that miR-1 increases Tbx5, Gata4 and AMHC1, while this microRNA diminishes Mef2c expression, during early differentiation of cardiac sinoatrial region. Further-more, we observed in this developmental context that miR-1 upregulates CRABPII and RARß, and downregulates CRABPI, which are three crucial factors in retinoic acid signaling pathway. Interestingly, we also noticed that miR-1 directly interacts with HDAC4 and Calmodulin, as well as with Erk2/MAPK1, which are three key factors actively involved in Mef2c regulation. Our study shows, for the first time, a key role of miR-1 as an epigenetic regulator in early differenti-ation of cardiac sinoatrial region through orchestrating opposite actions between retinoic acid and Mef2c, fundamental to properly assign cardiac cells to their respective heart chambers. A better understanding of those molecular mechanisms modulated by miR-1 will definitely help in fields applied to therapy and cardiac regeneration and repair.

Developing prolonged antigen delivery systems that mimick the long-term exposure to pathogens appears as a promising, still poorly explored approach to reach durable immunities. In this study, we have used a simple technology by which his-tagged proteins can be assembled, assisted by divalent cations, as supramolecular complexes with progressive complexity, namely protein-only nanoparticles and microparticles. Microparticles produced out of nanoparticles are biomimetics of secretory granules from the mammalian hormonal system. Upon subcutaneous administration, they slowly disintegrate, acting as an endocrine-like secretory system, and rendering the building block nanoparticles progressively bioavailable. The performance of such materials, previously validated for drug delivery in oncology, has been tested here regarding the potential for time-prolonged antigen release. This has been done by taking, as building blocks, a nanostructured version of p30, a main structural immunogen from the African swine fever virus (ASFV). By challenging the system in both mice and pigs, we have observed unusually potent pro-inflammatory activity in porcine macrophages, and long-lasting humoral and cellular responses in vivo, which might overcome the need for an adjuvant. The robustness of both innate and adaptive responses tag, for the first time, these dynamic depot materials as a novel and valuable instrument with transversal applicability in immune stimulation and vaccinology.

Commercially available oxidized (carboxylic groups) and non-oxidized multiwalled carbon nanotubes were studied as adsorbents of cerium(III) in batch operation mode. Several variables affecting the rare earth adsorption were investigated, including: the stirring speed applied to the system, the pH of the solution and the metal concentration and carbon dosages. Although the removal of cerium from the solution is different and dependent upon the adsorbent type: i) adsorption in non-oxidized multiwalled carbon nanotubes, ii) cation exchange in the case of using oxidized multiwalled carbon nanotubes, the adsorption kinetics, the rate law and the isotherm models are the same for both adsorbents: pseudo-second order, film diffusion and Langmuir Type-1, respectively. Cerium is desorbed from loaded adsorbents using acidic solutions.

This study analyzes tree diversity and its ecological importance value in silvopastoral systems in the Sumaco Biosphere Reserve (SBR), Ecuador, along an altitudinal gradient of 400-2000 masl. Twenty-six plots distributed in low (400-700 masl), medium (701-1600 masl) and high (1601-2000 masl) zones were used. The Shannon index and the Importance Value Index (IVI), based on abundance, dominance and relative frequency, were estimated. The results show variations in the diameter structure of the trees, influenced by factors such as settlement history and pasture management. The lower and middle zones showed higher tree density and diversity, linked to regeneration and the presence of nearby forests. Species of high commercial value, such as Cedrela odorata and Jacaranda copaia, were common, reflecting knowledge of the local timber market. In the lower and middle zones, the 10 most important species accounted for more than 70% of the trees, and up to 96% in the upper zone, indicating the need for further research on abundance factors and promotion of diversification in pastures. A total of 51 tree species were identified, mostly native, 64.7% are classified by the IUCN as "Least Concern", 31.4% as "Not Evaluated", and 3.9% as "Vulnerable", specifically highlighting Cedrela odorata and Cedrela Montana. The study concludes with policy recommendations related to the importance of trees in silvopastoral systems for the conservation of species and the livelihoods of local communities, highlighting the need for responsible management of Amazonian pasturelands.

Nisin, an antibacterial compound produced by Lactococcus lactis strains, has been approved by the US Food and Drug Administration to be used as a safe food additive to control the growth of undesirable pathogenic bacteria. Nisin is commonly described as a pH-dependent primary metabolite, since its production depends on growth and culture pH evolution. However, the relationship between bacteriocin synthesis and the consumption of the limiting nutrient has not been described until now. Therefore, this study aimed to develop a competitive four-dimensional Lotka Volterra-like equation to describe the relationships between culture pH, limiting nutrient (total nitrogen: TN) consumption and production of biomass (X) and nisin (BT) in four series of batch fermentation with L. lactis CECT 539 in diluted whey (DW)-based media. The developed four-dimensional LV-like equation (with a unique set of parameters) could not be used to describe all cultures belonging to each fermentation series. However, the four-dimensional LV-like equation described accurately each individual culture, providing a good description of the relationships between pH, TN, X and BT, higher values for R2 and F-ratios, lower values (&lt; 10%) for the mean relative percentage deviation modulus, with bias and accuracy factor values approximately equal to one.

Materials known as Nd:YAG are crystalline materials of the cubic system made from neodymium-doped yttrium aluminum garnet, which among others, have excellent optical properties. Nd:YAG four-level laser devices are highly used in both the health and industrial sectors. In this study, a simple and inexpensive alternative to manufacturing Nd:YAG materials through solid state reactions following powder processing routes was proposed. For this, an intense mixture of the precursor materials (Al2O3 and Y2O3) was carried out, followed by the addition of neodymium atoms to improve the optical properties of the resulting material. High energy mechanical mixing of the precursor powders resulted in submicron particles, with good size distributions of the powders. The advance of YAG formation was monitored by intermediate phase formation during heat treatment through interrupted tests at different temperatures and analysis by X-ray diffraction. From this analysis, it was found that reaction for the formation of the desired YAG is completed at 1500°C. Fourier-transform infrared spectroscopy analyses determined the presence of functional groups corresponding to the YAG. Finally, the study by optical emission spectroscopy showed wavelengths in agreement with the electronic structure of the elements of the synthesized Nd:YAG.

This paper investigates the effect of Fe contamination on the microstructure and mechanical properties of Al-7Si-0.7Mg-Fe2.5 alloy processed by Laser Powder Bed Fusion (LPBF) and heat treated in two different conditions: (1) Solution Heat Treatment (SHT) at 520 °C, followed by artificial ageing at 160 °C (T6), and (2) Direct Artificial Ageing of the as-printed material at 160 °C (DAA). Microstructural characterization was carried out by Optical Microscopy (OM), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Transmission Electron Microscope (TEM). Mechanical characterization was carried out by tensile tests at room temperature. The formation of fine AlSiFe phases such as α-AlFeSi, β-AlFeSi, and π-Al8Si6Mg3Fe had no deleterious effect on the mechanical properties compared to previous studies for AlSIMg alloys without Fe. However, compared to the as-printed condition, the T6 heat treatment decreased the ultimate tensile strain significantly, while the elongation to the fracture presented a slight improvement.

The transverse momentum distribution of J/ψ mesons produced in pp collisions at the center-of-mass energy 5 TeV, 7 TeV，and 13 TeV is described by the modified Hagedorn function which is based on the Tsallis function and Hagedorn function. The calculated results by the modified Hagedorn function are in accord with experimental data measured by the LHCb Collaboration at LHC. The related parameters are obtained and analyzed.

Considered one of the finest first-generation Nigerian writers, John Pepper Clark-Bekederemo, who passed away on 13th October, 2020, had been categorised as a Eurocentric writer. This work assesses the authenticity or otherwise of this critics’ perception of Clark by critiquing his America, their America. By analysing this autobiography vis-à-vis the notion of self and other which is a theoretical concern in contemporary travel writing, it was established, among other things, that every culture has its dark sides which it must not feel too proud to change as time and situation demand; that Clark vehemently rejects the Americans’ claim of sophistication and superiority of their culture over African culture. The paper concludes that contemporary travel writing should be a rightful site for negotiating cultural, political and diplomatic compromises between the Self and the Other since the gulf may be difficult to close altogether.

In this work, we propose a method to measure planar temperature fields of fluids flow. We used a focusing schlieren technique together with a calibration procedure to fulfill such purpose. The focusing schlieren technique uses an off-axis circular illumination to reduce the depth of focus of the optical system. The calibration procedure is based on the relation of the intensity level of each pixel of a focused schlieren image to the corresponding cutoff grid position measured at the exit focal plane of the schlieren lens. The method is applied to measure planar temperature fields of the hot air issuing from a 10 mm diameter nozzle of a commercial Hot Air Gun Soldering Station Welding. Our tests are carried out at different temperature values and different planes along the radial position of the nozzle of the Hot Air Gun Soldering Station Welding. The temperature values obtained experimentally are in agreed with those obtained with a thermocouple.

Objective: To identify risk factors(RF) related to abnormal glucose regulation(AGR) 3 years postpartum according to 3-month-postpartum glucose status. Research design: Normoglycemic pregnant women of the St. Carlos Gestational Study included before gestational week 12, during 2015-2017. Of 3,036 eligible women, 2529 were followed-up until delivery: 1400 participated in postpartum follow-up. AGR defined as fasting serum glucose (FSG)>5.6 mmol/L and/or HbA1c >5.7% (39 mmol/mol) and/or 2h-SG ≥140/mg/dL after 75-g OGTT. 12-modifiable and 3-unmodifiable RF were analyzed for associations with glycemic changes. Reinforcement of Mediterranean Diet adherence was provided to all women at the postpartum visit by a dietitian Results: 137/1400(9.8%) women presented AGR 3 years postpartum, 27/137(19.7%) also had at 3 months, whereas 110/137(80.2%) had not. The remaining 1,263(90.2%) women were normoglycemic 3 years postpartum, 1180/1263(84.3%) were at 3 months, while 83/1263(6.08%) had AGR and became normoglycemic. Women with GDM were more likely to progress to AGR 3 years postpartum (OR:1.60[1.33-1.92]) and less likely to remain normoglycemic (OR:0.22[0.15-0.33]) versus non-GDM women. Having >2/3 unmodifiable RF was associated with a reduced rate of maintained normoglycemia (OR:0.56[0.39-0.80]) and an increased risk of progression to AGR (OR:1.90[1.28-2.83]). Having >5/12 modifiable RF was associated with a reduced rate of maintained normoglycemic (OR:0.74[0.51-0.99]) and reversion of AGR (OR:0.49[0.25-0.97]), an increased progression to AGR (OR:1.40[1.00-2.09]), and persistence of AGR (OR:2.57[1.05-6.31]). Pre-gestational BMI≥25kg/m2 (OR:1.80[1.19-2.71]), post-delivery weight gain (OR:2.22[1.10-4.48]), and waist circumference >89.5cm (OR:0.54[0.36-0.79]), (all p<0.05) were the main modifiable RF. Conclusions: RF related to an increased probability for 3-year-postpartum AGR despite 3-month normoglycemia were identified, potentially useful when designing personalized strategies for pregnant women, directed towards minimizing unfavorable outcomes.

Food safety and quality are the first steps in the food chain. This work reports a low-cost and easy-to-use optoelectronic measurement system for improving feed chain quality and safety, based on near-infrared spectrometry (NIRS) technology. This is a significant challenge for dairy farm technicians and producers who need rapid and reliable knowledge of forage quality on their farms. In most cases, instrumentation suitable for these specifications is expensive and difficult to operate. The core of the measurement system is Texas Instruments´ NIRscan Nano Evaluation Module (EVM) spectrometer. This module has a large sensing area and high resolution suitable for forage samples. To evaluate the feasibility of the prototype to analyze agrifood samples, different ways of presenting the sample, intact or ground, were tested. The final objective of the research is not just to check the efficiency of the proposed system. It is also to determine the measurement system characteristics and how to improve them.

CagY is the largest and most complex protein from Helicobacter pylori's type IV secretion system (T4SS) and may participate in the modulation of gastric tissue inflammation. A three-dimensional structure has been reported for only two segments of the protein. To build a more complete model, particularly the region that spans between the outer membrane (OM) and the inner membrane (IM), we employed different approaches, including homology modeling, ab initio, and deep learning techniques. For the long-middle repeat region (MRR), modeling was performed using deep learning techniques and Molecular Dynamics. The modeled segments were assembled into a chain of 1595 aa, and a 14-chain CagY multimer structure was composed by structural alignment. The final multimer structure correlated with previously published struc-tures and allows to show how the multimer may form the T4SS channel through which CagA and other molecules are translocated to gastric epithelial cells. The model further confirmed that MRR, the most polymorphic and complex region of CagY, presents numerous cysteine residues forming disulfide bonds that stabilize the protein and suggest this domain probably functions as a contractile region that may play an essential role in the modulatory activity of CagY on tissue inflammation.

Inbreeding depression is expected to be more pronounced in fitness-related traits, such as pig litter size. Recent studies have suggested that the genetic determinism of inbreeding depression may be heterogeneous across the genome. Therefore, the objective of this study is to conduct a genomic scan across the pig autosomal genome to detect the genomic regions that control inbreeding depression for litter size in two varieties of Iberian pigs (Entrepelado and Retinto). The datasets consist of 2,069 (338 sows) and 2,028 (327 sows) records for litter size (Total Number Born and Number Born Alive) for the Entrepelado and Retinto varieties. All sows were genotyped using the Geneseek GGP PorcineHD 70 K. We employed the Unfavorable Haplotype Finder software to extract runs of homozygosity (ROHs) and conducted a mixed model analysis to identify highly significant differences between homozygous and heterozygous sows for each specific ROH. A total of 8 genomic regions located on SSC2, SSC5, SSC7, SSC8, and SSC13, were significantly associated with inbreeding depression, housing some relevant genes such as FSHR, LHCGR, CORIN, AQP6, and CEP120.

Background: The effectiveness of the anti-COVID-19 vaccine remains a matter to be clarified. Methods: The humoral and cellular immunity after the administration of three doses of the Pfizer–BioNTech and Oxford AstraZeneca vaccines against SARS-CoV-2 over one year and the appearance of post-vaccination COVID-19 have been studied. Results: Anti-SARS-CoV-2 IgG and IgA antibodies showed a progressive increase throughout the vaccination period. This increase was greatest after the third dose. The highest levels were observed in subjects who had anti-SARS-CoV-2 antibodies prior to vaccination. There was an increase in CD4+ αβ, CD8+ γδ and TEM CD8+ γδ T cells, and a decrease in apoptosis in CD4+CD8+ and CD56+ αβ and γδ T cells. Post-vaccination SARS-CoV-2 infection was greater than 60%. The symptoms of COVID-19 were very mild and were related to γδ T cell deficit, specifically CD8+ TEMRA and CD56+ γδ TEM, as well as lower pre-vaccine apoptosis levels. Conclusions: Those results demonstrate the important role that γδ T cells play in SARS-CoV-2 vaccine immunization.

This study is dedicated to understanding and simulating the mechanical properties of concrete, with a specific focus on the mesoscopic scale. Investigating concrete at this level involves examining its composition as a heterogeneous amalgamation comprising mortar, aggregates, and the interfacial transition zone (ITZ). Such an approach provides a detailed examination of the material's behavior and attributes. Numerical models are utilized, leveraging the finite element method (FEM), to examine the behavior of concrete. The study employs MATLAB programming to develop three-dimensional models, subsequently subjected to FEM analysis. Various mesoscopic Representative Volume Elements (RVEs) are formulated, encompassing varied shapes and dimensions. The MATLAB framework generates input files for numerical FEM simulations, replicating compression strength tests. As complexity increases with the inclusion of the ITZ, prismatic RVEs are developed. The proposed mesoscopic model establishes a foundational framework for a numerical simulation methodology tailored to laboratory compression tests. It provides detailed insights into concrete behavior, elucidating deformation, and fracture mechanisms. Although not a complete substitute for experimental methods, these models offer a cost-effective and expeditious alternative, pinpointing vulnerable areas and exploring the implications of additional materials on concrete behavior. Experimental data and virtual tests pave the way for mitigating carbon footprint and improving concrete sustainability.

This study develops a structure for mapping native vegetation in a transition area between Brazilian Cerrado and Atlantic Forest from integrated spatial information from the Sentinel-1 and Sentinel-2 satellites. Most studies use this data separately, however, the integrated use of optical sensors with Synthetic Aperture Radar (SAR) sensors can improve the methodology for classifying land use and land cover (LULC). The fusion of Sentinel-1 and Sentinel-2, for example, can increase the accuracy of mapping algorithms, using complementary information, such as spectral, backscattering, polarimetry, and interferometry. The study area comprises the Lobo Reservoir Hydrographic Basin, which is part of an environmental conservation unit protected by Brazilian law and with significant human development. LULC were classified, using the random forest deep learning algorithm. The classifying attributes were backscatter coefficients, polarimetric decomposition, and interferometric coherence for radar data (Sentinel-1), and optical spectral data, comprising bands in the red edge, near infrared, and shortwave infrared (Sentinel-2). The attributes were evaluated in three settings in which the SAR and optical data were evaluated separately (C1 and C2, respectively) and in an integrated manner (C3). The study found greater accuracy for C3 (96.54%), an improvement of nearly 2% compared to C2 (94.78%) and more than 40% in relation to C1 (55.73%). The classification algorithm encountered significant challenges in identifying wetlandsin C1, but performance improved in C3, enhancing differentiation by stratifying a greater number of classes during training and facilitating visual interpretation during sampling. Accordingly, the use of SAR and optical data becomes an alternative to optimize LULC mapping in tropical regions, due to the limited influence of atmosphere on images in the microwave range.

Background: The mental state is important in the health/illness process. Including stress, depression and anxiety. Nature immersion therapies have been implemented as a valid method for reducing these disorders. The aim will evaluate the effect of forest intervention therapies on levels of stress, depression, and anxiety. Methods: We searched for randomized clinical trials related to stress, anxiety and depression levels. Risk of bias was assessed according to the guidelines of the Cochrane Handbook for International Systematic Reviews. Results: We identified and synthesized eight publications. Two studies for cortisol showed significant differences between the pre-test and post-test levels in the intervention groups. One study including Natural killer cells, that reported a significant decrease in the intervention group compared to the control group. Two studies used the Stress Response Inventory, indicated a significant reduction in stress levels in the intervention group compared to the control group. Regarding Restorative Out-come Scale, no significant differences were found. Three studies were selected for the evaluation of anxiety and depression levels according to the Positive and Negative Affect Schedule. Four studies used The Profile of Mood States scale; no significant difference was observed. Conclusions: There is limited evidence to recommend forest bathing for reducing these disorders.

Oral health involves physiological functions related to mouth, teeth and orofacial structures, but also includes psychological and social dimensions. In this sense, oral health is an integrated part of human general health and well-being. Our aim was to access and evaluate the general oral health status of a high- and elite-level sample of Portuguese athletes from different sports. One hundred and sixteen participants were examined regarding their dental relationships, teeth and periodontal health, the presence of parafunctional activities (bruxism), and current or past orthodontic treatment. Our sample were predominantly adolescents and young adults, including 54 high-level and 62 elite subjects (71 males and 45 males) from 11 different sports, but mainly from swimming and athletics. Most sport performers presented with normocclusion (77%), despite the presence of other sagittal, transverse and vertical malocclusions. Twenty-three participants were affected by dental caries and six had missing teeth. Gingivitis (~40%) and dental calculus (~30%) were presented in our sample. Bruxism signs (47%) and current or past orthodontic treatment (~22%) were also found. Oral health conditions are not under control among high- and elite-level athletes, supporting the importance of healthcare needs and oral health promotion strategies in sports.

Cellular automata are mathematical models that represent systems with complex behavior through simple interactions between their individual elements. These models can be used to study unconventional computational systems and complexity. One notable aspect of cellular automata is their ability to create structures known as gliders, which move in a regular pattern to represent the manipulation of information. This paper introduces the modification of mean-field theory applied to cellular automata, using random perturbations based on the system’s evolution rule. The original aspect of this approach is that the perturbation factor is tailored to the nature of the rule, altering the behavior of the mean-field polynomials. By combining the properties of both the original and perturbed polynomials, it is possible to detect when a cellular automaton is more likely to generate gliders without having to run evolutions of the system.This methodology is a useful approach to finding more examples of cellular automata that exhibit complex behavior. We start by examining elementary cellular automata, then move on to examples of automata that can generate gliders with more states. To illustrate the results of this methodology, we provide evolution examples of the detected automata.

Interspecific competition between herbivorous insects is a major selection pressure affecting the distribution, abundance, and structure of their populations. Facilitator-mediated interactions, such as mutualism, can influence competition. Furthermore, the temporal dynamics of competitive relationships affect the interaction’s outcome. Here, we re-evaluated the data on the competition for space between two herbivorous insects commonly known as scales (Toumeyella martinezae and Opuntiaspis philococcus) in either the presence or absence of Liometopum apiculatum (a mutualistic species of T. martinezae) and its variations over time. We selected 27 Myrtillocactus geometrizans plants on which the studied insects were present; the plants were classified into one of five different conditions: either of the scale species were present on the plant, without its competitor; T. martinezae with neither its mutualistic species nor the competitor; and both scale species competing in either presence or absence of the mutualistic species. We kept a photographic record of each condition, measured the size of (as an indicator of the development stage) and area occupied by the individual scales, estimated the total coverage of each scale species, and assessed their relative occupation of space and their competitive intensity. We found temporal variations in competitive intensity. T. martinezae occupied more space during the first months, whereas O. philococcus did so towards the end of the study period. The population structure changed over time and between species, affecting the competitive interactions. In conclusion, the dynamics of competition change over time, and the mutualistic species has a positive effect on T. martinezae when the scales are in competition. However, temporal variations resulting from changes in the life cycle of the scales allow the two competitors to coexist in the same place at the same time.

Accelerated degradation of collagen membranes (CMs) in diabetic rats is associated with increased infiltration of macrophages and blood vessels. Since pre-implantation immersion of CMs in cross-linked high molecular weight hyaluronic acid (CLHA) delays membrane degradation, we evaluated its effect on the number of macrophages and endothelial cells (ECs) within the CM. Diabetes was induced with streptozotocin in 16 rats, while 16 healthy rats served as control. CM discs were labeled with biotin, soaked in CLHA or PBS and implanted under the scalp. Fourteen days later, CMs were embedded in paraffin and the number of macrophages and ECs within the CMs was determined using antibodies against CD68 and Transglutaminase II, respectively. Diabetes increased the number of macrophages and ECs within the CMs (∼2.5-fold and 4-fold, respectively). Immersion of CMs in CLHA statistically significantly reduced the number of macrophages (p<0.0001) in diabetic rats, but not that of ECs. In the healthy group, CLHA had no significant effect on the number of either cells. Higher residual collagen area and membrane thickness in CLHA-treated CMs in diabetic animals were significantly correlated with reduced number of macrophages but not ECs. Immersion of CM in CLHA inhibits macrophage infiltration and reduces CM degradation in diabetic animals.

The use of fluoride (F^-) for decreasing the prevalence and incidence of tooth decay was the greatest worldwide preventive public health measure of the 20th century. There have been controversial reports about the benefits of the use of F^-, because in small amounts it helps prevent dental caries, but in high concentrations it can be potentially toxic and harmful to dental and systemic health. Since the mid-20th century, F^- has been studied by toxicologists, looking at its deleterious effects in human populations. During the last decade, the interest on the undesirable effects has resurfaced because of the knowledge that it interacts with the cellular system, even in low doses, with a very small safety margin. Acute ingestion of toxic amounts of fluoride can cause corrosive gastric mucosa injury. Also respiratory effects such as bleeding, pulmonary edema, tracheostomy and shortness of breath, have been observed in individuals who inhale hydrogen fluoride. Some researchers had shown that F^- is an oxidizing agent and a well-known reversible enzymatic inhibitor that interferes with the enzyme activity of at least 80 proteins, can altered the intracellular redox equilibrium, lipid peroxidation, as well as, alteration in the gene expression and apoptosis induction. The primary purpose of this review is to examine findings of the action of inorganic F^-, and an overview of hard and soft tissue disturbances, known as fluorosis. The goal of this review is to enhance understanding of the mechanisms by which F^- affects cells with an emphasis on human tissue-specific events.

The barley (Hordeum vulgare) genome comprises over 32,000 genes, with differentiated cells expressing only a subset of genes; the remainder being silent. Mechanisms by which tissue-specific genes are regulated are not entirely understood, although DNA methylation is likely to be involved. DNA methylation patterns are not static during plant development, but it is still unclear whether different organs possess distinct methylation profiles. Methylation-sensitive GBS was used to generate DNA methylation profiles for roots, leaf-blades and leaf-sheaths from five barley varieties, using seedlings at the three-leaf stage. Differentially Methylated Markers (DMMs) were characterised by pairwise comparisons of roots, leaf-blades and leaf-sheaths of three different ages. While very many DMMs were found between roots and leaf parts, only a few existed between leaf-blades and leaf-sheaths, with differences decreasing with leaf rank. Organ-specific DMMs appeared to target mainly repeat regions, implying that organ differentiation partially relies on the spreading of DNA methylation from repeats to promoters of adjacent genes. Furthermore, the biological functions of differentially methylated genes in the different organs correlated with functional specialisation. Our results indicate that different organs do possess diagnostic methylation profiles and suggest that DNA methylation is important for both tissue development and differentiation and organ function.

Osteoarthritis (OA) is the most common cause of pain and disability in adults. Dietary supplements such as undenatured type II collagen (UC-II) have shown to have some benefits in OA treatment. This study aimed to assess changes in pain levels among knee OA patients treated with UC-II for 6 months. Patients with knee OA of any grade were given a daily 40 mg dose of UC-II (CondroArtil®) as a dietary supplement for 6 months. Pain levels were measured using the visual analog scale (VAS) before starting UC-II 6 months thereafter. A total of 100 patients (62/38: male/female) with a mean age of 46.3 ± 13.8 years participated in the study. Most patients (60%) had mild to moderate OA (grade I or II). The UC-II supplementation was shown to significantly reduce pain levels (p<0.001) with a negative correlation between pain reduction and age (p=0.006) and BMI (p=0.049). The OA severity also affected pain reduction (p=0.011), with grade II OA experiencing higher pain levels. Previous physical therapy and food supplements had a significant impact on pain reduction (p=0.017 and p=0.012, respectively). The study suggests that UC-II is an effective treatment for reducing pain in patients with knee OA.