Background: Permanent Daylight Savings Time (DST) may improve road safety by providing more daylight in the evening but could merely shift risk to morning commutes or increase risk due to fatigue and circadian misalignment. Methods: To identify how potential daylight exposure and fatigue risk could differ between permanent DST versus permanent Standard Time (ST) or current time arrangements (CTA), generic work and school schedules in five United States cities were modeled in SAFTE-FAST biomathematical modeling software. Commute data were categorized by morning (0700-0900) and evening (1600-1800) rush hours. Results: Percent darkness was greater under DST compared to ST for the total waking day (t=2.59, p=0.03) and sleep periods (t=2.46, p=0.045). Waketimes occurred before sunrise 63%±41% percent of the time under DST compared to CTA (42%±37%) or ST (33%±38%; F(2, 74)=76.37; p<0.001). Percent darkness was greater during morning (16%±31%) and lower during evening rush hour (0%±0%) in DST compare to either CTA (morning:7%±23%; evening:7%±14%) or ST (morning:7%±23%; evening:7%±15%). Discussion: Morning rush hour overlapped with students’ commutes and shift worker reverse commutes, which may increase traffic congestion and risk compared to evening rush hour. Switching to permanent DST may be more disruptive than either switching to ST or keeping CTA without noticeable benefit to fatigue or potential daylight exposure.

Global demand for sleep-tracking wearables, or consumer sleep technologies (CSTs), is steadily increasing. CST marketing campaigns often feature a scientific component, but the scientific relevancy and monetary value of CST features within the sleep research community remains unquantified. Sleep medicine experts were recruited through social media and nonprobability sampling techniques to complete a survey identifying sleep metrics and device features that are most desirable to the scientific community. A hypothetical purchase task (HPT) estimated economic valuation for devices with different features by price. Forty-six (N=46) respondents with an average of 10±6 years’ experience conducting research in real-world settings completed the online survey. Total sleep time was ranked as the most important measure of sleep followed by objective sleep quality while sleep architecture/depth and diagnostic information were ranked as least important. Experts preferred wrist-worn devices that could reliably determine sleep episodes as short as 20 minutes. Economic value was greater for hypothetical devices with longer battery life. These data set a precedent to determine how scientific relevance of a product impacts the potential market value of a CST device. This is the first known attempt to establish consensus opinion or economic valuation for scientifically-desirable CST features and metrics using expert elicitation.

The goal of this report was to examine the behavioral economic demand for consumer sleep technologies with different levels of validation and endorsement. The value or importance consumers place in different validation methods and the organizations conducting the evaluations was also assessed. Survey data were collected from 113 participants on Amazon mTurk. Participants indicated their likelihood of purchasing devices that varied in level of validation across a series of increasing prices. Demand curves were analyzed to determine the relative value of each watch type. Participants also reported how valuable or important different aspects of device validation were to them. Devices that were both evaluated against laboratory measures and endorsed by sleep researchers had the most value, followed by those only evaluated against laboratory measures, and then those not evaluated against any laboratory measures. The unit price at which there was 50% probability of purchase was increased by $25 or $44 for evaluation or endorsement, respectively. Respondents indicated the most valuable features were a measure of sleep duration, that it was most important that devices were validated against measures of sleep from a laboratory or hospital, and that they would put a high value on sleep tracker endorsements from a university or academic institution. Consumer demand is greatest for a device that has been evaluated by an independent laboratory for accuracy in measuring sleep and is endorsed by an academic, medical, or government institution. These results indicate a role for scientific evaluation and endorsement in consumer preference for sleep trackers.

Fatigue risk to commercial pilots operating under global pandemic conditions had not been in-vestigated prior to COVID-19. Examining how pilots slept during COVID-19 pandemic-specific flights can provide a precedent for estimating fatigue risk for future public health emergencies. Twenty (n=20) pilots flying across five COVID-19 humanitarian missions between Brazil and China wore a sleep-tracking device (the Zulu watch), which has been validated for the estimation of sleep timing (sleep onset and offset), duration, efficiency, and sleep depth (Wake, Interrupted, Light, or Deep Sleep) throughout the mission period. Pilots also reported sleep timing, duration and subjective quality of their in-flight rest periods using a sleep diary. To our knowledge, this is the first report of commercial pilot sleep behavior during ultra-long-range operations under COVID-19 pandemic conditions. Moreover, these analyses provide an estimate of sleep depth during in-flight sleep, which has not been reported previously in the literature.

The food distribution process is responsible for significant quality loss in perishable products. However, preserving quality is costly and consumes a tremendous amount of energy. To tackle the challenge of minimizing transportation costs and CO2 emissions while also maximizing product freshness, a novel multi-objective model is proposed. The model integrates a vehicle routing problem with temperature, shelf life, and energy consumption prediction models, thereby enhancing its accuracy. Non-dominated sorting genetic algorithm II is adapted to solve the proposed model for the set of Solomon test data. The conflicting nature of these objectives and the sensitivity of the model to shelf life and shipping container temperature settings are analyzed. The results show that optimizing freshness objective degrade the cost and the emission objectives, and the distribution of perishable foods are sensible to the shelf life of the perishable foods and temperature settings inside the container.

In this paper, we present sums and partial sums of Horadam sequences via generating functions which extends a recent result of Prodinger.

In this paper, closed forms of the sum formulas $\sum_{k=0}^{n}x^{k}W_{k}^{3}$ and $\sum_{k=1}^{n}x^{k}W_{-k}^{3}$ for the cubes of generalized Fibonacci numbers are presented. As special cases, we give sum formulas of Fibonacci, Lucas, Pell, Pell-Lucas, Jacobsthal, Jacobsthal-Lucas numbers.

Coronaviruses (CoVs) are enveloped positive-sense single-stranded RNA viruses with a genome 27-31kbases in length. Critical genes include the spike (S), envelope (E), membrane (M), nucleocapsid (N) and 9 accessory open reading frames encoding for non-structural proteins (NSPs) that have multiple roles in the replication cycle and immune evasion (1). There are 7 known human CoVs that most likely appeared after zoonotic transfer, the most recent being SARS-CoV-2 responsible for the Covid-19 pandemic. Antivirals that have been approved by the FDA for use against Covid-19 such as Paxlovid can potentially target and successfully inhibit the main protease (MPro) activity of multiple human CoVs, however alternative proteomes encoded by CoV genomes have a closer genetic similarity to each other, suggesting that antivirals could be developed now that target future CoVs. New zoonotic introductions of CoVs to humans are inevitable and unpredictable. Therefore, new antivirals are required to control not only the next human CoV outbreak, but also the 4 common human CoVs (229E, OC43, NL63, HKU1) that circulate frequently and to contain sporadic outbreaks of the severe human CoVs (SARS-CoV, MERS and SARS-CoV-2). The current study found that emerging antiviral drugs, such as Paxlovid, have only been proven to target SARS-CoV-2. Other drugs which have the potential to target other human CoVs, are still within clinical trial and are not yet available for public use. Monoclonal antibody (mAb) treatment and vaccines for SARS-CoV-2 can reduce mortality and hospitalisation rates, however they target the Spike protein whose sequence mutates frequently and drifts. Spike also is not applicable for targeting other HCoVs as these are not well conserved sequences among human CoVs. Thus, there is a need for readily available treatments globally that target all 7 human CoVs and improve the preparedness for inevitable future outbreaks. Here we discuss antiviral research contributing to the control of common and severe CoV replication and transmission, including the current SARS-CoV-2 outbreak. The aim was to identify common features of CoVs for antivirals, biologics and vaccines that could reduce the scientific, political, economic and public health strain caused by CoV outbreaks now and in the future.

This work deals with the evaluation of adhesive single-lap joints using ultrasonic guided waves. An adhesive bonded lap joint can be modelled as a three-layer system made up of two adherents and an adhesive. The propagation of guided waves in the joint is developed from matrix formulations. The behavior of the different guided wave modes that propagate in the bonded region is characterized and it is found that their relative amplitudes can be estimated based on the properties of the incoming wave that propagates in the non-bonded region. It was verified that the excitation of these modes is ruled by the degree in which the shapes of both modes match each other. A 3D simulation of two aluminium bonded plates using 500 kHz ultrasonic transducers in a pitch and catch configuration was implemented using the Matlab k-Wave toolbox. Scattering effects due to some produced defects located in the bond line of the lap joints were simulated. Experimental setup with some artificial defects produced in the aluminum joints were used in order to compare with the simulated. Qualitative agreement was observed for the two approaches. The observed deviation can be due to the different characteristics of the experimental and simulated defects.

Academic publishing is undergoing a highly transformative process, and many rules and value systems that were in place for years are being challenged in unprecedented forms leading to the evolution of novel ways of dealing with new pressures. One of the most important aspects of an integrated and valid academic literature is the ability to screen publications for errors during peer review to weed out mistakes, fraud and inconsistencies, such that the final published product represents a product that has value, intellectually, and otherwise. It is difficult to claim the existence of perfect manuscripts. The level of errors that exist in a manuscript will depend on the rigor of the research group and of the peer review process that was used to screen that paper. When errors slip into a final published paper, either through honest error or misconduct, and are not detected during peer review and editorial screening, but are spotted during post-publication peer review, an opportunity is created to set the record straight, and to correct it. To date, the most common forms of correcting the literature have been errata, corrigenda, expressions of concern, and retractions. Despite this range of corrective measures, which represent artificially created corrals around pockets of imperfect literature, certain cases do not quite fit this mold, and new suggested measures for correcting the literature have been proposed, including manuscript versioning, amendments, partial retractions and retract and replace. In this commentary, a discussion of the evolving correction of the literature is provided, as are perspectives of the risks and benefits of such new measures to improve it.

In the paper, the authors generalize the notion "k-Mittag-Leffler function'', establish some integral transforms of the generalized k-Mittag-Leffler function, and derive several special and known conclusions in terms of the generalized Wright function and the generalized k-Wright function.

: For a long time, atherosclerosis has been regarded as a mere lipid deposit in the blood vessels. However, in the recent years a growing body of experimental and clinical evidence have highlighted the role of inflammation and immunity as a central mechanism of disease. Moreover, in the last decade the coming of next-generation sequencing and its application to large human population has broken the barrier between inflammation and cancer. Indeed, acquired mutation in key genes related to the control of hematopoiesis and myeloproliferation have paved the way to establish the new concept of clonal hematopoiesis of indeterminate potential. This phenomenon is being considered not such “indeterminate”, but as an emerging cardiovascular risk factor. Thus, this may explain the mechanisms of myeloproliferation and inflammation in atherosclerosis. And in a bidirectional journey, it has helped to explain the extremely high cardiovascular risk in cancer survivors, in particular in myeloprolfierative neoplasm patients. A deeper understanding of these mechanisms may pave the way for the future early diagnosis and potential preemptive treatments of the leading worldwide cause of death.

Artificial Intelligence (AI) has emerged as a disruptive technology in various areas, and medicine is no exception. In the last decade, there has been rapid progress in the application of AI in healthcare, from diagnosing and prognosticating diseases to improving operational efficiency in hospitals. This literature review explores the advances of artificial intelligence in the field of medicine, discusses its benefits, and discusses the ethical and regulatory challenges that need to be addressed to maximize its potential.

This paper will explore analogs of groups formed by the transformations of two ropes as presented by Minh-Tam Quang Trinh.1 The two operations acting on these ropes are T and S, defined as twists and clockwise turns, respectively. These actions intertwine the ropes, creating tangles. T and S also have the ability to untangle the rope when used in certain combinations. In the two-rope case, these actions expressed as a group presentation were shown to be isomorphic to SL₂(Z). We explored the analog of these opera- tions, T and S, and conjectured the corresponding group to which they are isomorphic. Partial proofs for this conjecture are included and future work would include proving our conjecture as well as generalizing results to k ropes.

We review time expansion wave theory and refine our model showing it to accurately match observed cosmological luminosity data. The theory augments general relativity to create a container within which quantum effects can be explained by treating time as an artefact of a fourth spatial dimension that we observe as the expansion of the universe. This leads us to explain mass creation, the speed of light limit, gravity, black holes without singularities and other macroscopic effects. Our model leads to an expansion velocity of 6.87 0.36 × 106 ms-1, which results in a Hubble expansion rate constant of 71.3 3.7 km/s/Mpc. Because of the finite window of time in which we exist, an extra a degree of freedom is available leading to interesting interpretations at the subatomic level. At this size range, then a spin is allowed within the time dimension explaining why wave particle duality occurs and explains the electromagnetic force and other quantum mechanical properties. It provides a solution to the double slit conundrum and can explain how quantum entangled partners can behave in a quantum way and pass seemingly time-defying information. The potential quantitative origin of the fine structure constant which governs the size of the electromagnetic force is also strongly indicated by this theory.

As synthetic/artificial life forms become more abundant and sophisticated, an increasing number of bizarre creatures - xenobots, robots, soft A-life entities, genetically engineered organisms, etc. - are invading our society. Therefore, we need to bring order to all this, to establish what is living and what is not. Here, I intend to classify all these non-natural entities and clarify their status with reference to their consideration or not as living beings, leaving the door open to an uncertain future in which perhaps we can see how "the artificial" and "the natural" merge to originate something new. To order all this "new biodiversity" and to also give entry to viruses (which are excluded of the three-domains tree of life), I propose the creation of a new domain, Lithbea (from the name: life-in-the-border entities), in which all these new human-made entities as well as the viruses will be included. Within this domain there would be two kingdoms, Virus and Humade (contraction of human-made), based on their origin, natural or human-made. A brief description of each component of Lithbea is included and the implications for society and biology of this “new biodiversity” is briefly discussed.

The ecosystem is an essential biological concept linking the living and the inanimate and represents the main structural and functional unit of nature. The biodiversity that exists on our planet can be organized into closely interconnected living worlds: acellular (viruses and capsidless genetic elements), prokaryotic (bacteria and archaea), and eukaryotic (all nucleated organisms). I want to highlight the presence of viruses as components of biodiversity because they are often overlooked in many studies despite their essential ecological and evolutionary role. Furthermore, I propose seven distinctive hallmarks that are inherent to any ecosystem: biodiversity, physical environment, hierarchy, interactivity, openness, “homecostasis”, and evolutionary. From the interaction and coupling of these living worlds with the environment (the environmental world), I define the ecosystem as a specific and dynamic ensemble of living and non-living worlds that functions as an open, hierarchical, and evolving system. This complex web of interactions that we call ecosystem can be graphically represented as a triangle reflecting the dynamic equilibrium between all the worlds. Finally, I propose a new way of graphically relating the ecosystem to biodiversity by taking the ecosystem as the nucleus from which all living worlds emerge.

What is life, what is the difference between something that is alive and something that is not, are viruses living beings, or what would life be like elsewhere in the universe, are questions that still do not have clear-cut answers fully accepted by the scientific community. Based on the fundamental attributes of all living things, I define life as a process that takes place in very ordered organic structures and is characterized by being automatic, interactive and evolutionary. I also define a living being as an organic, highly ordered, automatic, interacting and evolutionary system, and a robot as an ordered automatic and interacting system. Based on this definition and what we know about the biology of viruses, I maintain that they should be considered as living entities. Finally, I explain why if there were life elsewhere in the universe, it would be very similar to what we know on our planet.

We know that living matter must behave in accordance with the universal laws of physics and chemistry. However, these laws are insufficient to explain the specific characteristics of the vital phenomenon and, therefore, we need new principles, intrinsic to biology, which are the basis for developing a theoretical framework for understanding life. Here I propose what I call the seven commandments of life (the Vital Order, the Principle of Inexorability, the Central Dogma, the Tyranny of Time, the Evolutionary Imperative, the Conservative Rule, the Cooperating Thrust) as a set of principles that help us explain the vital phenomenon from an evolutionary perspective. In a metaphorical way, we can consider life like an endless race in which living beings are the runners, who are changing as the race goes on (the evolutionary process), and the commandments the rules.

The COVID-19 pandemic crisis has brought about unprecedented economic and social consequences worldwide. The implementation of isolation measures, including national and international travel restrictions, significantly affected contact-intensive sectors such as tourism. During this lockdown period, Information and Communication Technology (ICT) was crucial in maintaining connectivity and enabling remote activities. Governments across the world implemented discretionary measures to mitigate the crisis's adverse effects on economic activity. This paper aims to analyze whether the level of ICT adoption and the importance of tourism influence the fiscal policy efforts pursued by governments. Based on the results of a linear regression analysis for 154 countries, the findings suggest that in countries with higher international tourism receipts, the governments had to promote higher fiscal stimulus. At the same time, ICT development diminished the efforts of the fiscal policy response to the crisis since it facilitated economic resilience. The findings of this study can contribute to understanding how governments responded to the pandemic crisis and the factors that influenced their fiscal policy decisions.

The KcsA is a prokaryotic potassium-oriented channel, which is sourced from the Streptomyces lividans soil bacteria. From extensive studies that have been carried over the KcsA potassium channel, it has been proved that various factors enable the gating and shuttling of the potassium ions into and out of the cells. Some of the factors include the different concentration of protons in the inside and outside membrane. The other factor is the existence of the selectivity filter equipped in the exit of channel pore, which enables the movement of the K⁺ ions. Not only are potassium ions present in the channel but also sodium ions. Potassium and sodium ions are the ions that are essential in the conductivity of a cell because of their charge. An intuitive idea about why K⁺ ions are at least 10,000 times more permeant than Na⁺ ions is presented in various entities. The hypothesis is that the selectivity ratio is probably related to the successive entry of Na⁺ ions, based on the premise that the ratio seems to be relevant to unpredictable quantities caused by Brownian corrosion of ions.

The excessive intake of sodium (Na) and insufficient intake of potassium (K) are major concerns to prevent hypertension. Using low-Na/K seasonings (reducing 25% of the NaCl and adding K salt) may improve the dietary Na/K ratio and help prevent hypertension. To devise an intervention study using low-Na/K seasonings at a company cafeteria, we calculated the Na and K contents of the meals served at the cafeteria and estimated changes in the intakes when suitable low-Na/K seasonings were used. We also considered using milk as a good source of K. We used an ingredient list of a company cafeteria and calculated Na and K contents in each dish. The average amounts of NaCl and K per use were 5.04 g and 718 mg, respectively. Seasonings contributed 70.9% of the NaCl. With the use of low-Na/K seasonings, an estimated reduction in NaCl of 0.8 g/day and an estimated increase in K of 308 mg/day was achieved. An additional serving (200 mL) of milk, NaCl was reduced by 0.57 g/day and K was increased by 610 mg/day, with an overall decrease in the dietary Na/K ratio from 3.20 to 2.40. The use of low-Na/K seasonings and dairy may improve the dietary Na/K ratio among cafeteria users and help prevent hypertension.

In this study, we examine microscale waterflooding in a randomly close-packed porous medium. Three different porosities are prepared in a microfluidic platform and saturated with silicone oil. Optical video fluorescence microscopy is used to track the water front as it flows through the porous packed bed. The degree of water saturation is compared to water containing two different types of chemical modifiers, sodium dodecyl sulfate (SDS) and polyvinylpyrrolidone (PVP), with water in the absence of a surfactant used as a control. Image analysis of our video data yield saturation curves and calculate fractal dimension, which we use to identify how morphology changes the way an invading water phase moves through the porous media. An inverse analysis based on the implicit pressure explicit saturation (IMPES) simulation technique uses mobility ratio as an adjustable parameter to fit our experimental saturation curves. The results from our inverse analysis combined with our image analysis show that this platform can be used to evaluate the effectiveness of surfactants or polymers as additives for enhancing the transport of water through an oil-saturated porous medium.

Recent developments, begun by the ascending spiral of the anticipated endless prospects of ChatGPT, promote artificial intelligence (AI) as an indispensable tool and commodity whose time has come. Yet the sinister specter of a technology that has hidden and unmanageable attributes that might be harmful to society looms in the background. As well as the likelihood that it will never deliver on the purported promise of artificial general intelligence (AGI). Currently the prospects for the development of AI and AGI are more a matter of opinion than based on a consistent methodological approach. Thus the need to take a step back to develop a general framework from which to evaluate current AI efforts, which also permits the determination of the limits to its future prospects as AGI. To gain insight into the development of a general framework, a key question that needs resolution is, what is the connection between human intelligence and machine intelligence? This is the question that needs a response because humans are at the center of AI creation and realize that without an understanding of how we become what we become, we have no chance of finding a solution. This work proposes infoautopoiesis, the self-referential, recursive and interactive process of self-production of information, as the needed general framework. Infoautopoiesis shows how the key ingredient of information is fundamental to an insightful resolution to this crucial question and allows predictions as to the present and future of AGI.

Let $\mathcal{N}$ be an arbitrary class of matroids, closed under isomorphism. For $k$ a positive integer, we say that $M \in \mathcal{N}$ is \emph{$k$-minor-irreducible} if $M$ has no minor $N \in \mathcal{N}$ such that $1\leq\left|E\left(M\right)\right|-\left|E\left(N\right)\right|\leq k $. Tutte's Wheels and Whirls Theorem establish that, up to isomorphism, there are only two families of 1-minor-irreducible matroids in the class of 3-connected matroids. More recently, Lemos classified the 3-minor-irreducibles with at least 14 elements in the class of triangle-free 3-connected matroids. Here we prove a local characterization for the 2-minor-irreducible matroids with at least 11 elements in the class of triangle-free 3-connected matroids. This local characterization is used to establish two new families of 2-minor-irreducible matroids in this class.

High concentrations of Na⁺ or [Co(NH₃)₆]³⁺ can induce the B to Z conformational transition in alternating (dC-dG) oligo and polynucleotides. The use of short DNA oligomers (dC-dG)₄ and (dm⁵C-dG)₄ as models can allow a thermodynamic characterization of the transition. Both form right handed double helical structures (B-DNA) in standard phosphate buffer with 115 mM Na⁺ at 25 ^oC. However, at 2.0 M Na⁺ or 200 mM [Co(NH₃)₆]³⁺, (dm⁵C-dG)₄ assumes a left handed double helical structure (Z-DNA) while the unmethylated (dC-dG)₄ analogue remains right handed under those conditions. We have previously demonstrated that the enthalpy of the transition at 25 ^oC for either inducer can be determined using isothermal titration calorimetry (ITC) [Ferreira, J. M. & Sheardy, R. D., Biophys. J. 2006, 91, 1–7]. Here, ITC is used to investigate the linkages between temperature, water activity and DNA conformation. We found that the determined enthalpy for each titration varied linearly with temperature allowing determination of the heat capacity change (DC_p) between the initial and final states. As expected, the DC_p values were dependent upon the cation (i.e. Na⁺ vs [Co(NH₃)₆]³⁺) as well as the sequence of the DNA oligomer (i. e., methylated vs unmethylated). Osmotic stress experiments were carried out to determine the gain or loss of water by the oligomer induced by the titration. The results are discussed in terms of solvent accessible surface areas, electrostatic interactions and the role of water.

The $k$-means problem is to compute a set of $k$ centers (points) that minimizes the sum of squared distances to a given set of $n$ points in a metric space. Arguably, the most common algorithm to solve it is $k$-means++ which is easy to implement, and provides a provably small approximation factor in time that is linear in $n$. We generalize $k$-means++ to support: (i) non-metric spaces and any pseudo-distance function. In particular, it supports M-estimators functions that handle outliers, e.g. where the distance $\mathrm{dist}(p,x)$ between a pair of points is replaced by $\min {\mathrm{dist}(p,x),1}$. (ii) $k$-means clustering with $m\geq 1$ outliers, i.e., where the $m$ farthest points from the $k$ centers are excluded from the total sum of distances. This is the first algorithm whose running time is linear in $n$ and polynomial in $k$ and $m$.

Abstract: Understanding the reliability and sensitivity of jump testing is essential to determine the neuromuscular progress of athletes and make informed decisions. This study aimed to assess the reliability and sensitivity of countermovement jump (CMJ) and drop jump (DJ) tests metrics in female volleyball players. Sixteen semi-professional female volleyball players participated in the study. Intrasession and intersession reliability of CMJ and DJ metrics were evaluated using a randomized cross-over design. Dual force platform was used to collect data, and several dependent variables were calculated using forward dynamics. Intraclass correlation coefficients (ICC), coefficients of variation (CV) and minimum difference (MD) were calculated. The third attempt presented the highest values for both test, and changes in jump strategy in DJ. CMJ is consistent across sessions, while DJ also shows intersession differences (p<0.05) in 11 out of 15 variables. Most CMJ variables exhibit excellent reliability while DJ variables have lower reliability and higher variability. Concentric and eccentric impulses for DJ showed excellent reliability. Most CMJ variables showed excellent reliability and variability, DJ had lower reliability, higher variability, and lower sensitivity. These findings provide valuable information when assessing athletes' performance and highlight the reliability, sensitivity, and variability in jump performance for CMJ and DJ tests.

Nanoporous membranes promise energy-efficient water desalination. Hexagonal boron nitride (h-BN), like graphene, exhibits outstanding physical and chemical properties, making it a promising candidate for water treatment. We employed Car–Parrinello molecular dynamics simulations to establish accurate modeling of Na+ and Cl- permeation through hydrogen passivated nanopores in graphene and h-BN membranes. In these complex systems the classical potentials cannot properly account for the physics at play. We demonstrate that ion separation works well for the h-BN by imposing a barrier of 0.13 eV and 0.24 eV for Na+ and Cl- permeation respectively, compared to the graphene where the Cl- ion faces a negative barrier of 0.68 eV and is prone toward blockade and Na+ permeation is associated with a slightly negative barrier of 0.03 eV. From the change in the solvation shell, we get the following trend: Na/h-BN > Na/G > Cl/G > Cl/h-BN. We argue that the trend in the permeation barrier changes to Cl-h-BN > Na-h-BN > Na-G > Cl-G due to a combination of several interactions, including the distortion of the water network induced by the ions, the ion-water interaction, and the ion-nanopore interaction. Overall, the desalination performance of h-BN surpasses that of their graphene counterparts.

Recent data suggest that K-Ras4B (hereafter K-Ras) can drive cancer cell stemness via calmodulin (CaM)-dependent, non-canonical Wnt-signalling. Here we examined whether another Ca2+-binding protein, the CaM-related centrin1, binds to K-Ras and could mediate some K-Ras functions that were previously ascribed to CaM. While CaM and centrin1 appear to distinguish between peptides that were derived from their classical targets, they both bind to K-Ras in cells. Cellular BRET-data suggest that CaM engages more with K-Ras than centrin1 and that the interaction with the C-terminal membrane anchor of K-Ras is sufficient for this. Surprisingly, binding of neither K-Ras nor its membrane anchor alone to CaM or centrin1 is sensitive to inhibition of prenylation. In support of an involvement of the G-domain of K-Ras in cellular complexes with these Ca2+-binding proteins, we find that oncogenic K-RasG12V displays increased engagement with both CaM and centrin1. This is abrogated by addition of the D38A effector-site mutation, suggesting that K-RasG12V is held together with CaM or centrin1 in complexes with effectors. When treated with CaM-inhibitors the BRET-interaction of K-RasG12V with centrin1 was also disrupted in the low micromolar range, comparable to that with CaM. While CaM predominates in regulating functional membrane anchorage of K-Ras, it has a very similar co-distribution with centrin1 on mitotic organelles. Given these results, a significant overlap of the CaM- and centrin1-dependent functions of K-Ras is suggested.

Nearest-neighbour clustering is a simple yet powerful machine learning algorithm that finds natural application in the decoding of signals in classical optical-fibre communication systems. Quantum k-means clustering promises a speed-up over the classical k-means algorithm; however, it has been shown to currently not provide this speed-up for decoding optical-fibre signals due to the embedding of classical data, which introduces inaccuracies and slowdowns. Although still not achieving an exponential speed-up for NISQ implementations, this work proposes the generalised inverse stereographic projection as an improved embedding into the Bloch sphere for quantum distance estimation in k-nearest-neighbour clustering, which allows us to get closer to the classical performance. We also use the generalised inverse stereographic projection to develop an analogous classical clustering algorithm and benchmark its accuracy, runtime and convergence for decoding real-world experimental optical-fibre communication data. This proposed `quantum-inspired' algorithm provides an improvement in both the accuracy and convergence rate with respect to the k-means algorithm. Hence, this work presents two main contributions. Firstly, we propose the general inverse stereographic projection into the Bloch sphere as a better embedding for quantum machine learning algorithms; here, we use the problem of clustering quadrature amplitude modulated optical-fibre signals as an example. Secondly, as a purely classical contribution inspired by the first contribution, we propose and benchmark the use of the general inverse stereographic projection and spherical centroid for clustering optical-fibre signals, showing that optimizing the radius yields a consistent improvement in accuracy and convergence rate.

Vitamin K occupies a unique and often obscured place among its fellow fat-soluble vitamins. Evidence is mounting however, that vitamin K (VK) may play an important role in the visual system apart from the hepatic carboxylation of hemostatic related proteins. However, to our knowledge, no review covering the topic has appeared in the medical literature. Recent studies have confirmed that matrix Gla protein (MGP), a vitamin K-dependent protein (VKDP), is essential for the regulation of intraocular pressure in the mouse. The PREDIMED (Prevención con Dieta Mediterránea) study, a randomized trial involving 5860 adults at risk for cardiovascular disease, demonstrated a 29% reduction in the risk of cataract surgery in participants with the highest tertile of dietary vitamin K1 (PK) intake compared with the lowest tertile. However, the specific requirements of the eye and visual system (EVS) for VK, and what might constitute an optimized VK status, is currently unknown and largely unexplored. It is the intention therefore of this narrative review to provide an introduction concerning VK and the visual system, review ocular VK biology, and to provide some historical context to recent discoveries. Potential opportunities and gaps in current research efforts will be touched upon, in the hope of raising awareness, and encouraging continued VK related investigations in this important and highly specialized sensory system.

Clustering, or otherwise known as cluster analysis, is a learning problem that takes place without any human supervision. This technique has often been utilized, much efficiently, in data analysis, and serves for observing and identifying interesting, useful, or desired patterns in the said data. The clustering technique functions by performing a structured division of the data involved, in similar objects based on the characteristics that it identifies. This process results in the formation of groups, and each group that is formed, is called a cluster. A single said cluster consists of objects from the data, that have similarities among other objects found in the same cluster, and resemble differences when compared to objects identified from the data that now exist in other clusters. The process of clustering is very significant in various aspects of data analysis, as it determines and presents the intrinsic grouping of objects present in the data, based on their attributes, in a batch of unlabeled raw data. A textbook or otherwise said, good criteria, does not exist in this method of cluster analysis. That is because this process is so different and so customizable for every user, that needs it in his/her various and different needs. There is no outright best clustering algorithm, as it massively depends on the user’s scenario and needs. This paper is intended to compare and study two different clustering algorithms. The algorithms under investigation are k-mean and mean shift. These algorithms are compared according to the following factors: time complexity, training, prediction performance and accuracy of the clustering algorithms.

In the context of Shared Autonomous Vehicles, the need to monitor the environment inside the car will be crucial. This article focuses on the application of deep learning algorithms to detect objects, namely lost/forgotten items to inform the passengers, and aggressive items to monitoring if violent actions may arise between passengers. For object detection algorithms was used public datasets (COCO and TAO) to train state-of-the-art algorithms, such as YOLOv5. For violent action detection was used the MoLa InCar dataset to train on state-of-the-art algorithms such as I3D, R(2+1)D, SlowFast, TSN and TSM. At the end an embedded automotive solution was used to demonstrate both methods running in real-time.

In the particular configuration of the scalar field K-essence in the Wheeler-DeWitt quantum equation, for some age in the Bianchi type I anisotropic cosmological model, a fractional differential equation for the scalar field arises naturally. The order of the fractional differential equation is $\beta=\frac{2\alpha}{2\alpha - 1}$. This fractional equation belongs to different intervals, depending on the value of the barotropic parameter; when $\omega_{X} \in [0,1]$, the order belongs to the interval $1\leq \beta \leq 2$, and when $\omega_{X}\in[-1,0)$, the order belongs to the interval $0<\beta \leq 1$. In the quantum scheme, we introduce the factor ordering problem in the variables $(\Omega,\phi)$ and its corresponding momenta $(\Pi_\Omega, \Pi_\phi)$, obtaining a linear fractional differential equation with variable coefficients in the scalar field equation, then the solution is found using a fractional power series expansion. The corresponding quantum solutions are also given. We found the classical solution in the usual gauge N obtained in the Hamiltonian formalism and without a gauge. In the last case, the general solution is presented in a transformed time $T(\tau)$, however in the dust era we found a closed solution in the gauge time $\tau$.

The main objective of this paper is to introduce k-fractional derivative operator by using the definition of k-beta function. We establish some results related to the newly defined fractional operator such as Mellin transform and relations to k-hypergeometric and k-Appell's functions. Also, we investigate the k-fractional derivative of k-Mittag-Leffler and Wright hypergeometric functions.

Live video streaming has become one of the main multimedia trends in networks in recent years. Providing Quality of Service (QoS) during live transmissions becomes a challenge due to the stringent requirements for low latency and minimal interruptions. This scenario has led to a high dependence on cloud services, implying a widespread usage of Internet connections, which constrains contexts where an Internet connection is not available. Thus, alternatives such as Mobile Ad Hoc Networks (MANETs) emerge as potential communication techniques. These networks operate autonomously with mobile devices serving as nodes, without the need for coordinating centralized components. However, these characteristics lead to challenges to live-video streaming, such as dynamic node topologies or periods of disconnection. Considering these constraints, this paper investigates the application of Artificial Intelligence (AI)-based classification techniques to provide adaptive streaming in MANETs. For this, a software-driven architecture is proposed to route stream in offline MANETs, predicting the stability of individual links and compressing video frames accordingly. The proposal has been implemented and assessed in a laboratory context, analyzing the model performance and QoS metrics. As a result, the model is implemented in a decision forest algorithm, which provides 95.9% of accuracy. Also, obtained latency values become assumable for video streaming, manifesting a reliable response for routing and node movements.

The visualization of hyperspectral images in display devices, having RGB colour composition channels is quite difficult due to the high dimensionality of these images. Thus, principal component analysis has been used as a dimensionality reduction algorithm to reduce information loss, by creating uncorrelated features. To classify regions in the hyperspectral images, K-means clustering has been used to form clusters/regions. These two algorithms have been implemented on the three datasets imaged by AVIRIS and ROSIS sensors.

Concept Knowledge (C-K) theory has been used in engineering and science-based research for more than a decade. Design of an Information Technology (IT) artefact is mostly pragmatic in nature. Design Science Research (DSR) methodology applied and studied in many Information Systems (IS) research. Many sub design decisions involved through the design of an IT artefact from a concept (idea) to a working prototype. A DSR artefact is based on a combination of decisions made during several sub-design stages. Artefacts are built based on the selection of elements in each sub-design space. Recording the design decisions on each sub-design space would be beneficial for future researchers. By knowing the design decisions on each sub-design space, researchers would be able to try different combinations of the design. C-K theory provides the ability to capture the design processes’ several sub-design spaces. In this paper, we discuss the DSR research methodology by looking at the stages proposed in the literature, and the application of C-K theory in an IT-based DSR. This paper also proposed a C-K theory-based protocol called Concept Tree for tracking and reporting artefact design steps. The application of C-K theory in DSR is exhibited using the implementation of the Concept Tree for a prototype design IT artefact.

In this paper, some convexity properties and some inequalities for the (p,k)-analogue of the Gamma function, Г_p,k(x) are given. In particular, a (p,k)-analogue of the celebrated Bohr-Mollerup theorem is given. Furthermore, a (p,k)-analogue of the Riemann zeta function, ζ_p,k(x) is introduced and some associated inequalities are derived. The established results provide the (p,k)-generalizations of some known results concerning the classical Gamma function.

Rangelands are a key resource present all over the world as it covers half of emerged lands. They are even more important in drylands, where they cover 48% of the total area. Intensification and the additional pressure added by climate change push these systems towards desertification. Over the last two decades, we have developed and applied System Dynamics (SD) models for the study of Mediterranean grasslands. In addition, we have developed procedures and analysis tools, such as global sensitivity analysis, stability analysis condition, or risk analysis, in order to detect the main drivers of these socio-ecological systems and provide indicators about their long-term sustainability. This paper reviews these works, their scientific background, and the most relevant conclusions, including purely technical and rangeland-related ones as well as our experience as systemic modelers in a world driven by field specialists.

In this paper a more flexible extension of the Fréchet distribution is introduced. The new distribution is defined by means of the stochastic representation as the quotient of two independent random variables, a Fréchet distribution and the power of a random variable with uniform distribution in the interval (0,1). We will call this new extension the Slash Fréchet distribution and one of its main characteristics is that its tails are heavier than the Fréchet distribution. The general density of this distribution and some basic properties are determined. Its moments, skewness coefficients and kurtosis are calculated. In addition, the estimation of the model parameters is obtained by the method of moments and maximum likelihood. Finally, two applications with real data are performed by fitting the new model and comparing it with the Fréchet distribution.

Polyolefin fibre reinforced concrete (PFRC) has become an attractive alternative to steel for the reinforcement of concrete elements mainly due to its chemical stability and the residual strengths that can be reached with lower weights. The use of polyolefin fibres can meet the requirements in the standards, although the main constitutive relations are based on the experience with steel fibres. Therefore, the structural contributions of the fibres should be assessed by inverse analysis. In this study, the fibre dosage has been fixed at 6kg/m³ and both self-compacting concrete and conventional concrete have been used to compare the influence of the positioning of the fibres. An idealized homogeneous distribution of the fibres with such fibres crossing from side to side of the specimen has been added to self-compacting concrete. The experimental results of three-point bending tests on notched specimens have been reproduced by using the cohesive crack approach. Hence, the constitutive relations were found. The significance of this research relies on the verification of the formulations found to build the constitutive relations. Moreover, with these results it is possible to establish the higher threshold of the performance of PFRC and the difficulties of limiting the first unloading branch typical of fracture tests of PFRC.

The positional cloning of single nucleotide polymorphisms (SNPs) of the neutrophil cytosolic factor 1 (Ncf1) gene, advocating that a low oxidative burst drives autoimmune disease, demands an understanding of the underlying molecular causes. A cellular target could be T cells, which have been shown to be regulated by reactive oxygen species (ROS). However, the pathways by which ROS mediate T cell signaling remain unclear. The adaptor molecule linker for activation of T cells (LAT) is essential for coupling T cell receptor-mediated antigen recognition to downstream responses, and it contains several cysteine residues that have previously been suggested to be involved in redox regulation. To address the possibility that ROS regulate T cell-dependent inflammation through LAT, we established a mouse strain with cysteine-to-serine mutations at positions 120 and 172 (LATSS). We found that redox regulation of LAT through C120 and C172 mediate its localization and phosphorylation. LATSS mice had reduced numbers of double-positive thymocytes and naïve peripheral T cells. Importantly, redox insensitivity of LAT enhanced T cell-dependent autoimmune inflammation in collagen-induced arthritis (CIA), a mouse model of rheumatoid arthritis (RA). This effect was reversed on an NCF1-mutated (NCF1m1j), ROS-deficient, background. Overall, our data shows that LAT is redox-regulated, acts to repress T cell activation, and is targeted by ROS induced by NCF1 in antigen-presenting cells (APCs).

The current study aims to produce a material that has a dual effect of healing and anti-inflammatory. For this target k-carrageenan/polyacrylamide hydrogel film loaded with cetrimide (k-CAR/PAAm/CI) was performed by manual casting technique. Definite concentrations of k-CAR and AAm was heated at 80°C for 2 hours, CI and glycerol were added. The solution was cast without using initiator and cross-linker. The reaction of the sulfonic acid group -SO3H of k-CAR with -CONH2 group of PAAm lead to the formation of a sulfonamide (-SO2NH-) linkage. The characteristics of the produced films were investigated by FTIR, TGA, contact angle, and mechanical properties. Improvement in the thermal stability was performed in k-CAR/PAAm/CI2 film containing 1.5% CI compared to the film has 0.5% CI (k-CAR/PAAm/CI1). The contact angle measurement proved the films are hydrophobic that enhanced by increasing CI content. The tensile strength and elongation percent values are considered adequate for materials used in wound care. k-CAR/PAAm/CI2 (1.5% CI) film showed superior antimicrobial activity against P. aeruginosa, moderate activity against S. aureus, and low activity against E. coli. The film k-CAR/PAAm/CI2 was effectively inhibiting the heat-induced hemolysis and may offer a promising approach for the development of effective wound dressings.

Landscape changes based on spectral responses allow showing plant cover changes through diversity, composition, and ecological connectivity. The spatial and temporal vegetation dynamics of the Bijagual Massif from 1986 to 2021 were analyzed as a measure of ecological integrity, conservation, and territory. The covers identified were high open forest (Hof), dense grassland of non-wooded mainland (Dgnm), a mosaic of pastures and crops (Mpc), lagoons (Lag), and bare and degraded lands (Bdl). The Bijagual Massif has 8,574.1 ha. In 1986, Dgnm occupied 42.6% of the total area, followed by Mpc (32.8%) and Hof (24.5%); by 2000, Mpc and Hof increased (43.7 and 28.1%, respectively), while Dgnm decreased (28%); by 2021, Dgnm was restricted to the northeastern zone and continued to decrease (25.2%), Mpc occupied 52.9%, Hof 21.7% and Bdl 0.1%. Of the three fractions of the connectivity probability index, only dPCintra and dPCflux contribute to ecological connectivity. Hof and Dgnm show patches with biota habitat quality and availability. Between 1986 and 2021, Dgnm lost 1,489 ha (41%) and Hof 239.5 ha (11%). Mpc replaced various covers (1,722.2 ha; 38%) in 2021. Bijagual has a valuable biodiversity potential limited by Mpc. Territorial planning and sustainable agroecological and ecotourism proposals are required due to the context of the ecosystems.

In recent years the yield of fruits and vegetables have been decreasing in Colombia, threatening national food security. Analysis of crop production data may lead to identifying cropping systems that have shown better adaptability to changes in climatic and non-climatic factors associated with agricultural production. The open database AGRONET keeps data of the agricultural activities conducted in Colombia, allowing to find the information organized by crops, regions and years; each row of the database registers farm information in Colombia. Aiming to identify resilient crops systems, agricultural data of fruits and vegetables were analyzed. First, trends in crop production were studied by year and locations, detecting the regions and crops with highest yields in the period from 2006 until 2020. Then, mixed linear regression and principal components analysis were applied to elucidate the relation between non-climatic factors and crop yield. In Colombia, vegetable production was more efficient than fruits, observing yields of 10.23 and 13.33 t ha^-1, respectively. On the other hand, the Colombian central region showed high yields for vegetables, while for fruits this was exhibited in northern and eastern locations. In the present study, yield variation responded to changes in the location of crop systems, while years had no effect on vegetable production. Furthermore, the price of the agricultural product and the cost of fertilizers were associated with the yield of the analyzed crops systems. In Colombia, carrot, cabbage, tomato papaya and pineapple are resilient crops whose yield increases especially by the regions where they are cultivated.

In this study, Silicon Carbide (SiC) nano-particle based serigraphic printing inks were formulated to fabricate highly sensitive and wide temperature range SiC printed thermistors. Initially, commercial silver ink was screen printed to fabricate inter-digitated electrodes (IDE’s) onto flexible Kapton® substrate via screen printing. Thermistor inks with different weight ratios of SiC nano- particles dispersed in polyimide resin matrix were fabricated. The SiC-polyimide temperature sensing inks were screen printed atop the IDE structures to form fully printed thermistors and encapsulated with a adhesive backed polyimide film for humidity inhibition. The high temperature tolerance of the Kapton® allowed the the sensors to be tested over a wide temperature range form 25◦C to 170◦C. The printed SiC thermistors exhibit excellent repeatability and stability over 15 hours of continuous operation. Optimal device performance was achieved with 30 wt.% SiC-polyimide ink. We report highly sensitive devices with a temperature coefficient of Resistance (TCR) of -0.556 %/◦C, a thermal coefficient of 502 K (β-index) and an activation energy of 0.08 eV which are comparable with printed thermistors previous reported. Further, the thermistor demonstrates an accuracy of ±1.35◦C which is well within the range offered by commercially available high sensitivity thermistors. SiC thermistors exhibit a small 6.5% drift due to changes in relative humidity between 10-90 %RH and a 4.2 % drift in baseline resistance after 100 cycles of aggressive bend testing at a 40°angle. The use of commercially available low cost materials, simplicity of design and fabrication techniques coupled with the chemical inertness of the Kapton® substrate and SiC nanoparticles paves the way to use all-printed SiC thermistors towards a wide range of applications where temperature monitoring is vital for optimal system performance.

While lidar-based forest inventory methods have been widely demonstrated, prediction of tree diameters with lidar is not well understood. The performance metrics typically used in studies for prediction of diameters can be difficult to interpret and may not support comparative inferences between sampling designs or study areas. We evaluate a variety of lidar and k nearest neighbor (k-NN) strategies for prediction of tree diameter distributions using two indices which are easier to interpret and compare. The indices are based on the coefficient of determination (R²), and root mean square deviation (RMSD). These indices facilitate comparisons with alternative (non-lidar) inventory strategies, and with other project areas. We evaluate k nearest neighbors (k-NN) dbh density (relative frequency by dbh class) prediction strategies with lidar for 190 training plots distribute across the 800 km² Savannah River Site in South Carolina, USA. We evaluate the performance of k-NN with respect to distance metrics, number of neighbors, predictor sets, and response sets. Amongst the examined strategies we found Mahalanobis distance with k = 3 neighbors performed best according to a number of criteria.

Research on early stages of corrosion of steel bars, together with the formation and development of cracks induced in the surrounding concrete and caused by chloride penetration, is relevant in improving the durability of reinforced concrete structures. This paper uses integration of the analytical models examined in the published literature, combined with experimental research in corrosion induced at the concrete/steel interface, in estimating the time-to-crack initiation of reinforced concrete subjected to corrosion. This work studies the influence of the porous network and electric current density on the cracking process at early ages. The experimental campaign was performed by using an accelerated corrosion test on a conventional concrete (CC) and a concrete with silica fume (SFC) by submitting them to a current density of 50μA/cm² and 100μA/cm². Examination performed by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) provided both qualitative and quantitative information on the penetration of the rust layer in the surrounding concrete porous network. Strain gauges were used to measure corrosion-induced deformations between steel and concrete matrices, as well as the formation of corrosion-induced cracks. A good correlation between the rate of penetration of the rust products in the surrounding pores and the delay of the cracking pressure in concrete was observed from the experimental results. This phenomenon is incorporated into the analytical model by using a reduction factor, which mainly depends on the pore size of the concrete. The crack width obtained exhibited a significant dependency on electric current density at the beginning of the test, depending mainly on the pore size of the concrete later.

A temperature-modulated pyroelectricity measurement system for a small single crystal is developed and applied to standard sample measurements performed on a thin single crystal of lithium niobate. The modulation measurement is based on the AC technique, in which the temperature of the sample is periodically oscillated, and the synchronized pyroelectric signal is extracted using a lock-in amplifier. Temperature modulation is applied by irradiating periodic light on the sample placed in the heat exchange gas. To apply this technique to the transparent reference sample, a commercially available black resin is coated on the sample’s surface to absorb the light energy and transmits it to the specimen. The experimental results are analyzed using a two-layer heat transfer model to verify the effect of the light-absorbing layer as well as the non-contact temperature modulation system.

(1) Background: Vitamin K deficiency is a common feature of chronic kidney disease (CKD), leading to impaired bone quality and increased risk of vascular calcifications. A method to indirectly measure Vitamin K status is measuring the blood level of Vitamin K dependent proteins (VKDP)- osteocalcin (OC) and matrix GLA protein (MGP). The aim of this study is to correlate the level of OC and MGP with markers of CKD mineral bone disorder (CKD-MBD). (2) Methods: We conducted a single-center cross-sectional study that included 45 CKD G5D patients and measured blood biochemistry, complete blood count and intact osteocalcin and matrix GLA protein. (3) Results: We found a strong statistically significant correlation of OC with the markers of CKD-MBD such as: iPTH , serum calcium and serum phosphorus and a strong indirect statistically significant correlation with abdominal circumference. There was also a statistically significant correlation of MGP with markers of inflammation (CRP). Higher levels of MGP were found in patients treated with vitamin K antagonists, non-calcium based phosphate binders and vitamin D receptor activator- paricalcitol. (4) Conclusions: In our study, we found that vitamin K deficiency, measured indirectly using the level of VKDP is associated to CKD-MBD. The use of medication such as phosphate binders, that reduce vitamin K absorbtion, Vitamin D that increases Vitamin K requirements and also vitamin K antagonists, seem to have an influence on the blood level of VKDPs.

We know that the classical Mittag-Leffler function play an important role as solution of fractional order differential and integral equations. We introduce the j-generalized p - k Mittag-Leffler function. We evaluate the second order differential recurrence relation and four different integral representations and introduce a homogeneous linear differential equation whose one of the solution is the j-generalized p-k Mittag-Leffler function. Also we evaluate the certain relations that exist between j-generalized p - k Mittag-Leffler function and Riemann-Liouville fractional integrals and derivatives. We evaluate Mellin-Barnes integral representation of j-generalized p-k Mittag-Le er Function. The relationship of j-generalized p-k Mittag-Leffler Function with Fox H-Function and Wright hypergeometric function is also establish. we obtained its Euler transform, Laplace Transform and Mellin transform. Finally we derive some particular cases.

Bone cement, mainly based in PMMA, is commonly used in different arthroplasty surgical proce-dures, and its use is essential for prosthesis fixation. However, its manufacturing process reaches high temperatures that can produce necrosis in the patients' surrounding tissues. In order to con-tribute to avoid this problem, the addition of graphene could delay the polymerisation of the MMA and, simultaneously, contribute to the optimisation of the composite material's properties. This article analysed the effect of the addition of different percentages of Highly Reduced Graphene Oxide (HRGO) with different wt. % (0,10, 0,50 and 1,00) and surface densities (150, 300, 500 and 750 m2/g) on the physical, mechanical, and thermal properties of commercial PMMA-based bone cement and its processing. It was noticed that a lower sintering temperature would be reached with this addition, making it less harmful to use in surgery and as it reduces its adverse effects. In contrast, the materials' density does not show significant changes, which indicates that the addi-tion of HRGO does not significantly increase its porosity. Lastly, the mechanical properties are re-duced by almost 20 %. Nevertheless, these properties are high enough so that these new materials can still fulfil their structural function.

The escalating environmental challenges that stem from urban residential waste in densely populated areas have become increasingly prominent in recent times. As a result, the waste management sector has experienced significant growth nationwide. However, due to the predominantly manual nature of these processes, their effectiveness falls short of meeting the current demand. Addressing these issues requires process enhancement. In this context, Industry 4.0, particularly the concept of Digital Twins, emerges as a potential avenue for refining processes. To tackle both current and future industry challenges, it is imperative to create a comprehensive methodology capable of generating effective solutions within the waste management sector. This paper provides an explanation of digital twins, outlines the methodological framework comprising an architectural structure and layered model, and details a series of sequential methodical stages for implementing digital twins based on the specific scope determined by the end-user. A noteworthy aspect is the transformative potential of digital twins in enhancing efficiency and precision within waste management practices. By providing a virtual real-time representation of the waste management system, digital twins empower simulations and experimentation to fine-tune processes. Furthermore, they facilitate informed decision-making by offering a detailed visualization of the complete system, simplifying the identification of challenges and opportunities for improvement. that this article derives from the presentation titled "Digital Twin application methodology for the improvement of production and service systems. Application to waste management processes" at the "Sustainable Smart Cities and Territories International Conference" held in the city of Manizales, Colombia, from 21st to 23rd June 2023.

Different types of gold nanoparticles have been synthesized that great potential in medical applications such as medical imaging, bio-analytical sensing and photothermal therapy. However, their stability, polydispersity and biocompatibility are major issues of concern. For example, the synthesis of gold nanorods, obtained through the elongated micelle process, produce them with a high positive surface charge that is cytotoxic. While gold nanoshells are unstable and within a few weeks they decompose due to Ostwald ripening. In this work, we report the self-assembly of the capsid protein of cowpea chlorotic mottle virus (CCMV) around spherical gold nanoparticles, gold nanorods and gold nanoshells to form virus-like particles (VLPs). All gold nanoparticles were synthesized or treated to give them a negative surface charge, so they can interact with the positive N-terminus of the capsid protein leading to the formation of the VLPs. To induce the protein self-assembly around the negative gold nanoparticles, we use different pH and ionic strength conditions that were determined from the capsid protein phase diagram. The encapsidation with the viral capsid protein confers them better biocompatibility, stability, monodispersity and a new biological substrate on which one can introduce specific ligands towards particular cells, broadening the possibilities of medical application.

In this paper, closed forms of the sum formulas $\sum_{k=0}^{n}W_{k}^{2}$ \ for the squares of generalized Tetranacci numbers are presented. We also present the sum formulas $\sum_{k=0}^{n}W_{k+1}W_{k},$ $\sum_{k=0}^{n}W_{k+2}W_{k},$ and $\sum_{k=0}^{n}W_{k+3}W_{k}.$ As special cases, we give summation formulas of the of Tetranacci, Tetranacci-Lucas and some other fourth order linear recurrance sequences.

The present study comprises the second part of our previous work that dealt mainly with the phytochemical and physicochemical characterization of green coffee, clove, cinnamon/clove and nutmeg ethanolic extracts of grape origin. In the present study, we focused on producing a discriminating model concerning green coffee, clove, cinnamon, cinnamon and clove, and nutmeg fine powders based on multivariate analysis of variance and supervised learning on data of volatile compounds analysis, carried out with solid phase dynamic extraction in combination with gas chromatography/mass spectrometry. Results showed that 7 volatile compounds namely ethylene, methanol, 3-methylpentane, ethyl acetate, 9-hexadecen-1-ol, toluene, and methyl acetate could differentiate the investigated samples resulting in a 100% classification rate using the cross-validation method of linear discriminant analysis. Results were further confirmed using partial least squares regression analysis. The study contributes to the typification of green coffee, cinnamon, clove, cinnamon and clove and nutmeg, based on selected volatile compounds, and provides further support to the literature by means of possible adulteration given the statistical models developed.

This paper seeks to optimize the mechanical and durability properties of ultra-high performance concrete (UHPC). To meet this objective, concrete specimens were manufactured by using 1,100 kg/m3 of binder, water/binder ratio 0.20, silica sand and last generation of superplasticizer. Silica fume, metakaolin and two types of nano silica were used for improving the performances of the concrete. Additional mixtures included 13mm long OL steel fibers. Compressive strength, electrical resistivity, mercury intrusion porosimetry tests and differential and thermogravimetric thermal analysis were carried out. The binary combination of nano silica and metakaolin, and the ternary combination of nano silica with metakaolin and silica fume, led to the best performances of the UHPC, both mechanical and durable performances.

In document forensic, Ink mismatch relays very important information about forgeries in this way we can find out the authenticity of documents. Finding out and distinguishing these unique inks from the multispectral document is very challenging task. In this paper we proposed the method to identify the inks using clustering. We used K-Mean clustering instead of widely known Fuzzy C-Means Clustering (FCM) and successfully identity the number of inks. For the purpose of optimizing and improving our results we used two optimization techniques such as Elbow and silhouette optimization techniques.

The k-means is one of the most popular and widely used clustering algorithm, however, it is limited to only numeric data. The k-prototypes algorithm is one of the famous algorithms for dealing with both numeric and categorical data. However, there have been no studies to accelerate k-prototypes algorithm. In this paper, we propose a new fast k-prototypes algorithm that gives the same answer as original k-prototypes. The proposed algorithm avoids distance computations using partial distance computation. Our k-prototypes algorithm finds minimum distance without distance computations of all attributes between an object and a cluster center, which allows it to reduce time complexity. A partial distance computation uses a fact that a value of the maximum difference between two categorical attributes is 1 during distance computations. If data objects have m categorical attributes, maximum difference of categorical attributes between an object and a cluster center is m. Our algorithm first computes distance with only numeric attributes. If a difference of the minimum distance and the second smallest with numeric attributes is higher than m, we can find minimum distance between an object and a cluster center without distance computations of categorical attributes. The experimental shows proposed k-prototypes algorithm improves computational performance than original k-prototypes algorithm in our dataset.

Zinc protection of galvanized steel is initially dissolved in alkaline solutions. However, passive layer is formed over time which protects the steel from corrosion. The behavior of galvanized steel exposed to strong alkaline solutions (pH values of 12.7) with a fixed concentration of sulfate ion of 0.04M is studied. Electrochemical measurement techniques such as corrosion potential, linear polarization resistance and electrochemical impedance spectroscopy are used. Synergistic effect of sulfate ion is also studied together with other anions such as chloride Cl- or bicarbonate ion HCO3- and with other cations such as calcium Ca2+, ammonium NH4+ and magnesium Mg2+. Presence of sulfate ions can depassivate the steel, leading to corrosion density of 0.3 µA/cm2 at the end of the test. The presence of other ions in the solution increases this effect. The increase in corrosion density caused by cations and anions responds to the following order (greater to lesser influence): NH4+&gt;Ca2+&gt;Mg2+ and HCO3- &gt;Cl- &gt;SO42-.

Size effect on plain concrete specimens is well known and can be correctly captured when performing numerical simulations by using a well characterised softening function, but in the case of fibre reinforced concrete this is not directly applicable, since an only diagram cannot capture the material behaviour on elements with different size due to dependence of the orientation factor of the fibres with the size of the specimen. In previous works, the use of a trilinear softening diagram proved to be very convenient for reproducing fracture of polyolefin fibre reinforced concrete elements, but only if it is previously adapted for each specimen size. In this work, a predictive methodology is used to reproduce fracture of polyolefin fibre reinforced concrete specimens of different sizes under three-point bending. Fracture is reproduced by means of a well known embedded cohesive model, with a trilinear softening function that is defined specifically for each specimen size. The fundamental points of these softening functions are defined a priori by using empirical expressions proposed in past works, based on an extensive experimental background. Therefore, the numerical results are obtained in a predictive manner, and then compared with a previous experimental campaign, showing that this approach properly captures the size effect, although some values of the fundamental points in the trilinear diagram could be defined more accurately.

This document presents the design and manufacture of a reflectarray (RA) antenna for the Ku-band, based on a fully-metallic 3D architecture. The reflectarray unit cell is formed by a square-shaped waveguide section ended in a short circuit, that is the reflectarray back ground plane. Each cell has the ability of configuring the phase of its own reflected field by means of resonators perforated on the walls of the cell waveguide section. The resonator-based waveguide cell introduces the 3D character to the design. The geometry of the resonators and its size variation introduces the phase behaviour of each cell, conforming the radiation pattern of the reflectarray. This design explores the potential of phase value truncation (6 states and 2 states), and demonstrates that proper pattern results can be obtained with this phase truncation.

Abstract: The probability of existence or not of local extinctions of six species of carnivorous mammals was analyzed by ordering the species composition in nested subsets in 7 fragments of forest habitats in the Coastal Mountains in the Araucanía Region, in southern Chile. Nested Temperature Calculator (NTC) and BINMATNEST computer programs were used to process the results. The first software provided a temperature in the archipelago of 28.21 degree Celsius, whereas the second program showed a nesting temperature of 16.58 degree Celsius. The computer software used in this study suggest that there is no nesting pattern at the level species composition of carnivorous mammal assemblage in the evaluated area, which may be due to the habitat use characteristics of the different carnivorous mammals studied here.

Plastic flow in body-centered cubic (bcc) alloys is governed by the thermally-activated screw dislocation motion. In bcc interstitial solid solutions, solute diffusion can occur at very fast rates owing to low migration energies and solute concentrations. Under mechanical loading, solutes may move on the same or similar time scale as dislocations glide, even at low temperatures, potentially resulting in very rich co-evolution processes that may have important effects in the overall material response. It is therefore important to accurately quantify the coupling between interstitial impurities and dislocations, so that larger-scale models can correctly account for their (co)evolution. In this paper, we use electronic structure calculations to obtain the energetics of oxygen diffusion under stress and its interaction energy with screw dislocation cores in bcc tungsten. We find that oxygen atoms preferentially migrate from tetrahedral to tetrahedral sites with an energy of 0.2 eV. This energy couples only weakly to hydrostatic and deviatoric deformations, with activation volumes of less than $0.02$ and $0.2b^3$, respectively. The strongest effect is found for the inelastic interaction between O atoms and screw dislocation cores, which leads to attractive energies on the order of 1.5 eV and a structural transformation of the screw dislocation core from an `easy' to a `hard' core configuration

Triangular resonators re-shaped with the Sierpinski geometry and U-shaped resonators have been designed, linking them with single-pole-double-through (SPDT) RF MEMS switches to provide frequency tuning for potential applications in the K-Band. Prototypes of band-stop narrowband filters working around 20 GHz and 26 GHz, interesting for RADAR and satellite communications, have been studied in coplanar waveguide (CPW) configuration, and the tuning was obtained by switching between two paths of the devices loaded with different resonators. As a result, dual-band operation or fine-tuning can be obtained depending on the choice of the resonator, acting as a building block. The studied filters belong to the more general group of devices inspired by the metamaterial design.

In this article we investigate the determinants of the European “Most Cited Publications”. We use data from the European Innovation Scoreboard-EIS of the European Commission for the period 2010-2019. Data are analyzed with Panel Data with Fixed Effects, Panel Data with Random Effects, WLS, and Pooled OLS. Results show that the level of “Most Cited Publications” is positively associated, among others, to “Innovation Index” and “Enterprise Birth” and negatively associated, among others, to “Government Procurement of Advanced Technology Products” and “Human Resources”. Furthermore, we perform a cluster analysis with the k-Means algorithm either with the Silhouette Coefficient and the Elbow Method. We find that the Elbow Method shows better results than the Silhouette Coefficient with a number of clusters equal to 3. In adjunct we perform a network analysis with the Manhattan distance, and we find the presence of 4 complex and 2 simplified network structures. Finally, we present a confrontation among 10 machine learning algorithms to predict the level of “Most Cited Publication” either with Original Data-OD either with Augmented Data-AD. Results show that the best machine learning algorithm to predict the level of “Most Cited Publication” with Original Data-OD is SGD, while Linear Regression is the best machine learning algorithm for the prediction of “Most Cited Publications” with Augmented Data-AD.

Adolescents experience rapid physical, cognitive, and psychosocial growth with different factors that contribute to health and well-being. In this view, an important role is played by body weight and its perception. The aim of this study was to determine, in a sample of Italian late adolescents, whether health related quality of life (HRQoL) is associated with the different weight status categories (underweight, normal weight, overweight, obese), even considering sex differences. Data were collected from 1826 adolescents (n=735 males). HRQOL was analyzed using the Italian version of KIDSCREEN-52. Overweight adolescents showed a reduced psychological well-being (p<0.05) and self-perception (p<0.05), then other BMI categories. Subjects with obesity reported an increased bullying victimisation (p<0.05), reduced self-perception and eating disorders (p<0.001), while underweight were characterised by an altered adherence to the Mediterranean diet (p<0.001), eating disorders (p<0.001), and problematic use of social media (p<0.05). No sex differences were found, except for socio-economic status perception, where underweight girls reported a higher economic well-being than boys (p<0.05). Our results may suggest that there is an association between weight status categories and HRQoL, more pronounced in underweight and overweight adolescents. The association between BMI categories and psychosocial dimensions opens the need to define specific domains on which such preventive interventions should focus, always through a personalized perspective.

The effects of post-treatment temperature-based methods on 1D single PLA filaments after FFF have been studied. This lets to decouple the variables related to the 3D structure (layer height, raster angle, infill density, and others) from the variables solely related to the material (molecular weight, molecular orientation, crystallinity, and others). PLA 1D filaments have been aged at 20, 39, 42, 51, 65, 75 and 80 ºC in a water-bath-inspired process in which the hydrolytic degradation of the PLA has been minimised for the ageing temperatures of interest. The evolution of the thermal and mechanical properties of the PLA filaments at different temperatures was recorded. Differential scanning calorimetry (DSC) was used to evaluate thermal and physical properties, in which the glass transition, enthalpic relaxation, crystallisation and melting reactions were analysed. Tensile tests were performed to evaluate the tensile strength and elastic modulus. The flow-induced molecular orientation, the degradation, the logistic fitting and the so-called summer effect –stabilisation of properties at higher temperatures– are discussed for assessing the safeness of accelerating ageing.

This paper aims to provide the smart grid research community with an open and accessible general mathematical framework to develop and implement optimal flexibility mechanisms in large-scale network applications. The motivation of this paper is twofold. On the one hand, flexibility mechanisms are currently a hot topic of research, which is aimed to mitigate variation and uncertainty of electricity demand and supply in decentralised grids with a high aggregated share of renewables. On the other hand, a large part of such related research is performed by heuristic methods, which are generally inefficient (such methods do not guarantee optimality) and difficult to extrapolate for different use cases. Alternatively, this paper presents an MPC-based (Model Predictive Control) framework explicitly including a generic flexibility mechanism which is easy to particularise to specific strategies such as Demand Response, Flexible Production and Energy Efficiency Services. The proposed framework is benchmarked with other non-optimal control configurations to better show the advantages it provides. The work of this paper is completed by the implementation of a generic use case which aims to further clarify the use of the framework and thus, to ease its adoption by other researchers in their specific flexibility mechanisms applications.

This paper investigates the use of deep learning techniques to perform energy demand forecasting. Specifically, the authors have adapted a deep neural network originally thought for image classification and composed of a convolutional neural network (CNN) followed by a multilayered fully connected artificial neural network (ANN). The convolutional part of the network was fed with a grid of temperature forecasting data distributed in the area of interest in order to extract a featured temperature. The subsequent ANN is then fed with this calculated temperature along with other data related to the timing of the forecast. The proposed structure was first trained and then used in a real setting aimed to provide the French energy demand forecast using ARPEGE forecasting weather data. The results show that the performance of this approach is in the line of the performance provided by the reference RTE subscription-based service, which opens the possibility to obtain high accuracy forecasting using widely accessible deep learning techniques through open-source machine learning platforms.

Fibre reinforced cementitious materials (FRC) have become an attractive alternative for structural applications. Among such FRC, steel and polyolefin fibre reinforced concrete and glass fibre reinforced concrete are the most used ones. However, in order to exploit the properties of such materials structural designers need constitutive relations that reproduce FRC fracture behaviour accurately. This contribution analyses the suitability of multilinear softening functions combined with a cohesive crack approach for reproducing the fracture behaviour of the FRC previously mentioned. The implementation performed accurately simulates the fracture behaviour while being versatile, robust and efficient from a numerical point of view.

This article investigates on the radial and non-radial geodesic structures of the generalized K-essence Vaidya spacetime. Within the framework of K-essence geometry, it is important to note that the metric does not possess conformal equivalence to the conventional gravitational metric. This study employs a non-canonical action of the Dirac-Born-Infeld kind. In this work, we categorize the generalized K-essence Vaidya mass function into two distinct forms. Both the forms of the mass functions have been extensively utilized to analyze the radial and non-radial time-like or null geodesics in great details inside the comoving plane. Indications of the existence of wormhole can be noted during the extreme phases of spacetime, particularly in relation to black holes and white holes, which resemble the Einstein-Rosen bridge. In addition, we have also detected the distinctive indication of the quantum tunneling phenomenon around the central singularity.

For a positive integer k, a radio k-coloring of a simple connected graph G = (V (G), E(G)) is a mapping | f(u) - f(v)| ≥ k +1-d (u , v ) such that f :V (G)→{0,1, 2,...} for each pair of distinct vertices u and v of G, where d(u, v) is the distance between u and v in G. The span of a radio k-coloring f, rck(f), is the maximum integer it assigns to some vertex of G. The radio k-chromatic number, rck(G) of G is min{rck(f)}, where the minimum is taken over all radio k-colorings f of G. If k is the diameter of G, then rck(G) is known as the radio number of G. In this work, we propose four algorithms (two serial algorithms and their parallel versions) which related to the radio k-coloring problem. One of them is an approximate algorithm that determines an upper bound of the radio number of a given graph. The other is an exact algorithm which finds the radio number of a graph G. The approximate algorithm is a polynomial time algorithm while the exact algorithm is an exponential time algorithm. The parallel algorithms are parallelized using the Message Passing Interface (MPI) standard. The experimental results prove the ability of the proposed algorithms to achieve a speedup 7 for 8 processors.

With a data revolution underway for some time, there is an increasing demand for formal privacy protection mechanisms that are not so destructive. Hereof microaggregation is a popular high-utility approach designed to satisfy the popular k-anonymity criteria while applying low distortion to data. However, standard performance metrics are commonly based on mean square error, which will hardly capture the utility degradation related to a specific application domain of data. In this work, we evaluate the performance of k-anonymous microaggregation in terms of the loss in classification accuracy of the machine learned models built from perturbed data. Systematic experimentation is carried out on four microaggregation algorithms that are tested over four data sets. The empirical utility of the resulting microaggregated data is assessed using the learning algorithm that obtains the highest accuracy from original data. Validation tests are performed on a test set of non perturbed data. The results confirm k-anonymous microaggregation as a high-utility privacy mechanism in this context and distortion based on mean squared error as a poor predictor of practical utility. Finally, we corroborate the beneficial effects for empirical utility of exploiting the statistical properties of data when constructing privacy preserving algorithms.

In this present paper, we deal with the generalized (k, s)-fractional integral and differential operators recently defined by Nisar et al. and obtain some generalized (k, s)-fractional integral and differential formulas involving the class of a function as its kernels. Also, we investigate a certain number of their consequences containing the said function in their kernels.

The determination of the parameters that characterise the air-void system in hardened concrete elements becomes crucial for structures under freezing and thawing cycles. The ASTM C457 standard describes some procedures to accomplish this task, but they are not easy to apply, require specialised equipment such as a stereoscopic microscope and result in highly tedious tasks to be performed. This paper describes an alternative procedure to the modified point-count method described in the Standard that makes use of macro photography. This alternative procedure is successfully applied to a large set of samples and presents some advantages over the traditional method, since the required equipment is less expensive and provides a more comfortable and less tedious procedure for the operator.

Recent advancements in gut microbiome research have highlighted the complex interplay between gut microbiota and various physiological and pathological processes, showing that gut microbiota plays a vital role in human health and disease. Imbalances in the gut microbiota, known as dysbiosis, have been associated with a range of health conditions, including gastrointestinal disorders, metabolic diseases, etc. In response to these findings, probiotics, prebiotics, synbiotics, and postbiotics have emerged as a promising therapeutic strategy to modulate gut microbiota composition and functionality. This review paper explores the latest research on how gut microbiota impacts host physiology, immune responses, and overall well-being. Furthermore, the paper delves into the therapeutic potential of probiotics, postbiotics, prebiotics, and synbiotics in therapeutic applications and curing various diseases. The paper also addresses the challenges and opportunities in the field, highlighting the need for personalized approaches to probiotic therapy and the importance of considering factors such as strain specificity, dosing, and safety.Overall, this review aims to provide a comprehensive overview of the evolving landscape of gut microbiota and probiotics, prebiotics, synbiotics, and postbiotics as novel therapeutic agents. It underscores the potential of harnessing the gut microbiome to improve health, prevent diseases, and complement traditional medical interventions. As research in this field continues to expand, a deeper understanding of the gut microbiota and probiotics, prebiotics, synbiotics, and postbiotics promises new avenues for preventive and therapeutic healthcare strategies.

Aiming at the problem of low charging efficiency caused by the scattered sensor nodes in traditional wireless rechargeable sensor networks (WRSNs), a UAV-assisted WRSN Online Charging Strategy Based on Dynamic Queue and Improved K-means (UOCS) is proposed. The scheme assumes that the energy consumption of nodes is unpredictable, and only generates charging requests when the energy is lower than a threshold, and performs on-demand responses to nodes that issue charging requests. The scheme combines the characteristics of one-to-one charging of UAVs, the selection and allocation timing of waiting queues and the number of UAVs, and the improved K-means partitioning based on space-time coordination(SPKM), which simplifies the problem of coordinated charging of multiple UAVs and maximizes energy. Using the efficiency and charging success rate, the optimal charging trajectory can be found under the constraint that the node will not starve to death due to power shortage. Finally, a simulation comparison experiment is carried out with the existing UAV charging scheduling strategy. UOCS achieves the optimal node survival rate with low algorithm complexity.

The goal of the study presented in this article is to investigate interconnection issues of the Intelligent Electrical Networks (IENs) with the existing ones, as well as the deployment of the appropriate load forecasting demand techniques. The concept of IENs has recently emerged as a potential solution to the global energy problem, due to the more flexible dispersed production units that are involved. In the same context, additional issues, such as the reduction of production-transfer-distribution costs as well as power losses are analyzed as well, via the penetration of Renewable Energy Sources (RESs). To this end, it is necessary to use appropriate advanced infrastructure, where in combination with modern telecommunication networks will make possible the full exploitation of IENs. Moreover, to make the electricity system more efficient, to avoid voltage and frequency imbalance issues and to implement optimal production and consumption planning, the Electric Load Forecast (ELF) is a vital process and plays a key role in the planning as well as in the management of electricity systems. Therefore, recent state of the art approaches in ELF methods are discussed as well.

The application potential of cellulosic materials in natural composites and other fields needs to be explored to develop innovative, sustainable, lightweight, functional biomass materials that are also environmentally friendly. This study investigated Typha augostifolia (Typha sp.) as a potential new raw material for extracting cellulose nanocrystals (CNCs) for application in wastewater treatment composites. Alkaline treatments and bleaching were used to remove cellulose from the stem fibers. The CNCs were then isolated from the recovered cellulose using acid hydrolysis. The study showed a few distinct functional groups (O-H, -C-H, =C-H and C-O, and C-O-C) in the Fourier Transform Infrared (FTIR) spectra. Scanning electron microscope (SEM) revealed the smooth surface of CPC and CNCs that resulted from removing lignin and hemicellulose from powdered Typha augostifolia. Based on the crystalline index, the powdered Typha augostifolia, CPC, and CNCs were 42.86%, 66.94% and 77.41%. The loss of the amorphous section of the Typha sp. fiber resulted in a decrease in particle size. It may be inferred from the features of a Typha sp. CNC that CNCs may be employed as reinforcement in composites for wastewater treatment.

Objective The aim of this study was to examine the impact of a modern lifestyle on college female students' health, specifically focusing on their hip and knee joint mobility. The objective of this study was to assess the influence of hydraulic resistance training with the self-myofascial release technique on improving joint mobility in female college students. The training also aimed to compare the effectiveness of hydraulic resistance exercise with and without the self-myofascial release technique on hip and knee joint mobility.Methods The study used a randomized controlled trial design to recruit 30 female college students aged 18-25 through campus advertisements and announcements. Medical conditions or injuries that might have affected participation was screened. Participants were indiscriminately allocated to Group A (Hydraulic Resistance Training with Self-Myofascial Technique) or Group B (Hydraulic Resistance Training without Self-Myofascial Technique). The baseline assessments included joint range of motion (ROM) measurements using a goniometer. Certified trainers supervised the training sessions, and the data were analyzed using SD and mean using SPSS. ResultsThis study aimed to evaluate the impact of hydraulic resistance training with self-myofascial release on hip and knee joint mobility in female college students. The results showed that both groups showed improved hip and knee flexion with and without the self-myofascial release technique. However, the Group A using the self-myofascial release technique (Group A) showed a more significant enhancement, as indicated by the smaller p value compared to Group B. It has been suggested that the self-myofascial release technique may improve hip and knee joint mobility. ConclusionThis study concluded that Hydraulic Resistance Training with Self-Myofascial Release (HSMR) could improve hip and knee joint mobility among female college students. These findings suggest that integrating the self-myofascial release technique into training regimens can improve joint mobility. However, further research with larger sample sizes and extended intervention periods was needed to understand the long-term effects and sustainability of these improvements.

Rare ginsenoside compound K (CK), is an intestinal microbial metabolite with a low natural abundance that is primarily produced by physicochemical processing, side chain modification, or metabolic transformation in the gut. Moreover, CK exhibits potent biological activity compared to primary ginsenosides, which has raised concerns in the field of ginseng research and development as well as ginsenosides-related dietary supplements and natural products. Ginsenosides Rb1, Rb2, and Rc are generally used as a substrate to generate CK via several bio-conversion processes. Current research shows that CK has a wide range of pharmacological actions including boosting osteogenesis, lipid and glucose metabolism, lipid oxidation, insulin resistance, anti-inflammatory, and anti-apoptosis properties. Further research on the bioavailability and toxicology of CK can advance its medicinal application. The purpose of this review is to lay the groundwork for future clinical studies and the development of CK as a therapy for metabolic disorders. Furthermore, the toxicology and pharmacology of CK are investigated as well in this review. The findings indicate that CK primarily modulates signal-ing pathways associated with AMPK, SIRT1, PPARs, WNTs, and NF-kB. It also demonstrates a positive therapeutic effect of CK on nonalcoholic fatty liver disease, obesity, hyperlipidemia, diabetes, and its complications, as well as osteoporosis. Additionally, the analogues of CK showed more bioavailability, less toxicity, and more efficacy against disease states. Enhancing bioavailability and regulating hazardous variables are crucial for its use in clinical trials.

Pathologies of the blood brain barrier (BBB) have been linked to a multitude of CNS disorders whose pathology is poorly understood. Cortical spreading depression (CSD) has long been postulated to be involved in the underlying mechanisms of these disease states, yet full understanding remains elusive. This study utilized an in vitro model of the BBB with b.End3 murine endothelial cells to investigate the role of CSD in BBB pathology by characterizing effects of the release of major pronociceptive substances on BBB functional integrity using TEER screening, transcellular uptake, and immunoreactive methods in concert with global proteome and phospho-proteomic approaches. Findings demonstrated relocalization and functional alteration to proteins associated with the cytoskeleton and endothelial tight junctions. Pathologic mechanisms induced by individual substances released during CSD were found to have unique phosphorylation signatures in phospho-proteome analysis, identifying Zona Occludens 1 as a possible pathologic “checkpoint” of the BBB. Utilizing these phosphorylation signatures, possible novel diagnostic methods may be developed for neurological diseases and warrants further investigation.

The effect of graphene oxide (GO) on mechanical strengths and durability of cement composites has been studied by preparing GO-modified cement mortars. Thermogravimetric analysis (TGA) and nuclear magnetic resonance (29Si MAS-NMR) were performed on the cement paste to research the influence of GO on the hydration process and chain structure of calcium-silicate-hydrate (C-S-H) gels. In addition, mechanical strength test, such as compressive and flexural, were performed on cement mortars. The addition of GO at 0.05 wt.% (by weight of cement) increased the compressive strength by 9.02% after 28 days. Furthermore, the flexural strength of cement mortars with 0.05 wt.% GO and superplasticizer (SP) after 7 and 28 days increased by 12.26% and 21.86%, respectively, compared with reference mortar. At the same time, the effect of GO proved to be more significant and effective in the durability tests, suggesting that GO can enhance the microstructure through hydration products to create a highly cross-linked micro structure.

Many corporations have now revised their value statements to showcase their commitment to sustainable development and green business due to the pressing issues of climate and environmental damage. Despite the importance of value statements that can direct companies to achieve sustainable goals, what kind of values can be perceived as organizational orientations to sustainability remains unknown. This study explores how the general public views the inclusion of sustainable components in value statements from the listed companies in Hong Kong by using Q-sort methodology (n = 30). Analyzing the final sample of 40 value statements extracted from 27 listed companies, we identified three factors related to sustainability, namely, Empowering business process management, Empowering customer-centric excellence, and Empowering sustainable progress. This study provides an additional component to the traditional triple bottom line by suggesting that internal operation of a company is an emerging idea to understand corporate sustainability.

Lactoperoxidase (LP), which is a high-value minor whey protein, has recently drawn extensive attention from research scientists and industry due to its multi-function and potential therapeutic applications. In this study, the separation and optimization of two similar-sized proteins, LP and lactoferrin (LF) were investigated using strong cation exchange column chromatography. Optimization was started with central composite design based experiments to characterize the importance of different decision variables. The three variables used in the optimization were flow rate, length of gradient and final salt concentration in the linear elution gradient step. The obtained empiric functional model represented the effect of the significant factors on the yield as the objective function. Afterwards, the calibrated mechanistic model was employed to predict accurate optimal set of variables. The optimal operating points were found and the results were compared with validation experiments. Predictions respecting yield confirmed a very good agreement with experimental results while keeping purity, a product quality characteristic, equal or above to a predefined value.

The article is devoted to the research of economic cycles and crises, which are studied within the framework of the theory of long waves by N. D. Kondratiev (K-waves) using the mathematical apparatus of fractional calculus. The object of the study is the mathematical model of S.V. Dubovsky 3 and some of its modifications, which describe the dynamics of the economic system, characterizing the interaction between the efficiency of new technologies and the efficiency of capital productivity. Modifications in the model are determined by the following points: the mathematical model takes into account the dependence of the rate of accumulation on capital productivity, there is an external harmonic influence - the influx of investments and new technological solutions, the economic system has heredity, including time-dependent, which leads to a delayed effect - the system’s response to impact. The property of heredity in the mathematical model is taken into account using fractional derivatives of constant and variable orders. Mathematical model S.V. Dubovsky and its modifications are studied numerically using the Adams-Bashforth-Moulton algorithm. Oscillograms and phase trajectories are constructed, and an interpretation of the simulation results is given.

In the achievement of the Sustainable Development Goals (SDGs), education plays a fundamental role. However, traditional methodologies do not favor the enrichment and personal development essential to promote global awareness. The use of active methodologies based on experiences improve the quality of learning. This work describes the design, implementation, and evaluation of the acquired knowledge of a didactic proposal for non-formal education as a support for regulated education based on botany content. Firstly, a workshop was held, where young people participated directly in developing field work with a real scientific methodology. Subsequently, a group of students was chosen to be interviewed to obtain a global vision of the learning they obtained. The motivation of the students was quite positive, which allowed us to obtain voluntary participation in the field work and gave the students a participative attitude throughout the development of the workshops. Four months later, this positive attitude remained during their direct involvement in various activities, and the students still remembered the fundamental content discussed. Relating the didactic proposal to its immediate environment was shown to increase interest in learning and value in its own context. The results of this educational experience have been very positive, as knowledge was acquired, and interest in the preservation of the environment and the profession of a researcher was promoted.

General characteristics of K changes together with their fine structure associated with ground flashes in Sri Lanka in the tropics are presented. It is found that on average there are about 2 K changes associated with each return stroke. Analysis of the fine structure of the K changes shows that the K change is a chaotic pulse burst. Some of these chaotic pulse bursts start and the others end as a regular pulse bursts. Sometimes the chaotic part occurs in between two regular pulse bursts. This is in agreement with the recent published results that claim that chaotic pulse bursts are a random superposition of regular pulse bursts. The results show that the small step fields identified in the literature as K changes are the static fields associated with these pulse bursts.

In this paper, we establish some inequalities bounding the ratio Г_p,k(x)/Г_p,k(y), where Г_p,k(.) is the (p,k)-analogue of the Gamma function. Consequently, some previous results are recovered from the obtained results.

Three autonomous communities have been the ones that, in the 2022-2023 season, anticipated the document approved by the Public Health Commission, recommending influenza vaccination for all children aged 6 to 59 months. The main objective of this work is to evaluate the attitude of healthcare professionals towards the first universal vaccination campaign in our region, as well as the acceptability of the vaccines used and the attitude towards the piloting of school vaccination. Cross-sectional, survey-based, descriptive study. All healthcare professionals involved in the campaign were invited to participate. The 91.9% of surveyed professionals thought that flu vaccination from 6 to 59 months was important or very important. 89.8% had previous experience regarding the intramuscular vaccine. The professionals valued the intranasal vaccine significantly more positively; however, there were no differences when asking for each of the vaccines without comparison. The inhaled vaccine was preferred by 97.5% for the following campaign. Piloted school vaccination showed 75% acceptance. The inhaled vaccine was preferred by most professionals and the piloted school vaccination was highly accepted, and independently associated to the importance of vaccination as considered by physicians, being a medical doctor, and participation in the pilot program.

Background and objective K. pneumoniae appeared to be a significant problem due to its ability to accumulate antibiotic-resistance genes. After 2013, alarming colistin resistance rates among carbapenem-resistant K. pneumoniae have been reported in the Balkans. The study aims to perform an epidemiological, clinical, and genetic analysis of a local outbreak of COLr CR-Kp. Material and methods All carbapenem-resistant and colistin-resistant K. pneumoniae isolates observed among patients in the ICU unit of Military Medical Academy, Sofia from 1 January to 31 October 2023 were included. The results were analyzed according to the EUCAST criteria. All isolates were screened for blaVIM, blaIMP, blaKPC, blaNDM, and blaOXA-48. Genetic similarity was determined using the Dice coefficient as a similarity measure and the unweighted pair group method with arithmetic mean (UPGMA). mgrB genes and plasmid-mediated colistin resistance determinants (mcr-1, mcr-2, mcr-3, mcr-4, mcr-5) were investigated. Results There was a total of 379 MDR-K. pneumoniae isolates, 88% of which were carbapenem-resistant. Of them, there were 9 (2.7%) colistin-resistant isolates in six patients. A time and space cluster for five patients was found. Epidemiology typing showed that two isolates belonged to clone A (pts. 1, 5) and the rest to clone B (pts. 2-4) with 69% similarity. Clone A were coproducers of blaNDM-like and blaOXA-48-like and had mgrB-mediated colistin resistance (40%). Clone B isolates had only blaOXA-48-like and intact mgrB genes. All isolates were negative for mcr-1,-2,-3,-4,-5 genes. Conclusions The study describes a within-hospital spread of two clones of COLr CR-Kp with a 60% mortality rate. Clone A were coproducers of NDM-1 and OXA-48-like enzymes and had mgrB-mediated colistin resistance. Clone B isolates had only OXA-48-like enzymes and intact mgrB genes. No plasmid-mediated was found. The extremely high mortality rate and limited treatment options warrant strict measures to prevent outbreaks.

The Na+/K+ ATPase is a protein involved in the active transport of ions across the cellular membrane. Ouabain is a cardiotonic glycoside that, by inhibiting the Na+/K+ pump, interferes with cell processes mediated directly by the pump, but also indirectly influences other cellular processes, such as cellular cycle and proliferation, growth, cell differentiation, angiogenesis, migration, adhesion and invasion. We used the SK-BR-3 breast cancer cell line, mesenchymal stem cells (MSCs), and tumor-associated fibroblasts (TAFs) in vitro for determining the changes induced by Ouabain in concentration of 10-5 M, 10-6 M, 10-8 M, 10-9 M on these cellular types, employing specific methods: SEM for morphological evaluation; immunocytochemistry, flowcytometry to assess immunophenotypical markers expression, cell cycle and Annexin V/PI assay for cellular proliferation and viability testing; flowchamber assay to evaluate functional adhesion behavior; RT-PCR for Na+/K+ ATPase subunits molecular expression. Being indicative of the pro-apoptotic and inhibitory effect of Ouabain on tumor invasion and metastasis, the results support the addition of Ouabain to the oncological therapeutic arsenal, trailing the “repurposing drugs” approach.

In our previous study, a novel barrier processing on a porous low-dielectric constant (low-k) film was developed: an ultrathin Mn oxide on a nitrogen-stuffed porous carbon-doped organosilica film (p-SiOCH(N)) as a barrier of the Cu film was fabricated. To form a better barrier Mn₂O_3-xN film, an additional annealing at 450°C was implemented. In this study, the electrical characteristics and reliability of this integrated Cu/Mn₂O_3-xN/p-SiOCH(N)/Si structure is investigated. The proposed Cu/Mn₂O_3-xN/p-SiOCH(N)/Si capacitors exhibited poor dielectric breakdown characteristics in the as-fabricted stage, although, less degradation was found after thermal stress. Moreover, its time-dependence-dielectric-breakdown electric-field acceleration factor slightly increased after thermal stress, leading to a larger dielectric lifetime in a low electric-field as compared to other MIS capacitors. Furthermore, its Cu barrier ability under electrical or thermal stress was improved. As a consequent, the proposed Cu/Mn₂O_3-xN/p-SiCOH(N) scheme is a promising integrity for back-end-of-line interconnects.

Although the signaling function of Na/K ATPase is been studied for decades, the chasm between the pumping function and the signaling function of Na/K – ATPase is still an open issue. This article explores the relationship between ion pumping and signaling with attention to the amplification of oxidants through this signaling function. Starting with some experimental observations published by our laboratories and others, we develop some predictions regarding cellular oxidant stress.

Increased nutrient withdrawal by rapidly expanding intensive cropping systems, in combination with imbalanced fertilization, is leading to potassium (K) depletion from agricultural soils in Asia. There is an urgent need to better understand the soil K-supplying capacity and K-use efficiency of crops to address this issue. Maize is increasingly being grown in rice-based systems in South Asia, particularly in Bangladesh and North East India. The high nutrient extraction, especially K, however, causes concerns for the sustainability of maize production systems in the region. The present study was designed to estimate, through a plant-based method, the magnitude, and variation in K-supplying capacity of a range of soils from the maize-growing areas and the K-use efficiency of maize in Bangladesh. Eighteen diverse soils were collected from several upazillas (or sub-districts) under 11 agro-ecological zones to examine their K-supplying capacity from the soil reserves and from K fertilization (@ 100 mg K kg-1 soil) for successive seven maize crops grown up to V10-V12 in pots inside a net house. A validation field experiment was conducted with five levels of K (0, 40, 80, 120 and 160 kg ha-1) and two fertilizer recommendations based on “Nutrient Expert for Maize-NEM” and “Maize Crop Manager-MCM” decision support tools (DSSs) in 12 farmers’ fields in Rangpur, Rajshahi and Comilla districts in Bangladesh. Grain yield and yield attributes of maize responded significantly (P < 0.001) to K fertilizer, with grain yield increase from 18 to 79% over control in all locations. Total K uptake by plants not receiving K fertilizer, considered as potential K-supplying capacity of the soil in the pot experiment, followed the order: Modhukhali >Mithapukur >Rangpur Sadar >Dinajpur Sadar >Jhinaidah Sadar >Gangachara >Binerpota >Tarash >Gopalpur >Daudkandi >Paba >Modhupur >Nawabganj Sadar >Shibganj >Birganj >Godagari >Barura >Durgapur. Likewise in the validation field experiment, the K-supplying capacity of soils was 83.5, 60.5 and 57.2 kg ha-1 in Rangpur, Rajshahi, and Comilla, respectively. Further, the order of K-supplying capacity for three sites was similar to the results from pot study confirming the applicability of results to other soils and maize-growing areas in Bangladesh and similar soils and areas across South Asia. Based on the results from pot and field experiments, we conclude that the site-specific K management using the fertilizer DSSs can be the better and more efficient K management strategy for maize.

This study aims to investigate the hydration and strength characteristics of green cementitious mortars with ultrahigh-volume limestone-calcined clay as well as two kinds of Class F fly ash. Using the ASTM C311 strength activity index test method, the effect of different pozzolan replacement levels of cement (0%, 20%, 50%, and 80%, by weight) were investigated. Compressive strength at 3, 7, 14, 28 and 90 days under standard curing was recorded, and hydration heat of the 20% and 80% replacement mixes was studied using iso-thermal calorimetry. It was observed that the effectiveness of the pozzolan in mortars depends on particle size distribution, glassy or amorphous nature, surface area and replacement level. The sum of all these effects can be captured by the strength activity test only if the standard recommended 20% pozzolan mix is substituted with the actual mix composition. The results in this study provide insights into the mix design and applications of ultrahigh-volume pozzolanic cementitious materials specifically made with limestone-calcined clay, and promote greener cement and concrete in construction industry.

Rapidly rotating neutron stars with very strong surface magnetic fields are observed to emit pulsed emission in the whole range of electromagnetic spectrum from radio to high energy gamma-rays. These so called pulsars are known for their exceptional rotational stability. The radio emission from pulsars is generally believed to be powered by the rotational energy of neutron stars. More than 3000 pulsars have been currently known from radio observations, however, it is observed that a large population of pulsars is also bright in optical, X-rays and gamma-rays. The Fermi-LAT observations in the energy range above 100 MeV have discovered about 300 pulsars. However, origin of high energy non-thermal radiation from pulsars is not completely understood and remains an active area of research. In this contribution, we report a summary of observational features of the gamma-ray pulsars and perform pulsar population study to predict their detectability for the MACE gamma-ray telescope, which has just started its regular science operation at Hanle in India.