The corrugated board is a versatile and durable material that is widely used in the packaging industry. Its unique structure provides strength and cushioning, while its recyclability and bio-degradability make it an environmentally friendly option. The strength of corrugated board depends on many factors, including the type of individual papers on flat and corrugated layers, the geometry of the flute, temperature, humidity, etc. This paper presents a new approach to analysis geometric features of corrugated boards based on the images. It allows for precise determination of the geometry of the corrugated layer, as well as the thickness of individual papers in all cardboard layers. The experimental set used in the work and the created software are characterized by high reliability and precision of measurement thanks to the use of an identification procedure based on image analysis and evolutionary algorithms. This allows to quickly find the main geometric characteristics of the corrugated board, which in turn leads to the possibility of performing numerical analyzes taking into account the real model of the corrugated board. Calculations made on a real (correctly mapped geometrically) model allow, for example, a more reliable analysis of the composition of the cardboard, and thus also to obtain greater savings in the optimization process.

The article focuses on derivation of simplified predictive models for identification of overall compressive stiffness and strength of corrugated cardboards. As a representative example an unsymmetrical 5-ply sample (with E and B flute) was used in this study. In order to exclude unreliable displacement measurement in the standard edge crush test, the virtual strain gauges are used. Video extensometry is employed here to collect measurements from the outer surfaces of the sample on both sides. Additional data allows for obtaining real force-displacement curves, which are used in the validation procedure. To emulate the experimental results, beside simple analytical model, also a 3D numerical model fully reflecting the geometry of the corrugated board, based on finite elements method was also built. In both cases a good agreement between the experimental results and the analytical and numerical calculations was observed. This proves that the proposed analytical model can be successfully used to determine the overall stiffness and compressive strength of the corrugated board, provided that the geometry and properties of all the layers of the board are known. The simple model presented in this work enables quick and reliable design and prototyping of new assemblies without the need to manufacture them.

Corrugated board, widely used in the packing industry, is a recyclable and durable material. Its strength and cushioning, influenced by geometry, environmental conditions like humidity and temperature, and paper quality, make it versatile. Double-walled (or five-ply) corrugated board, comprising two flutes and three liners, enhances these properties. This study introduces a novel approach to analyze 5-layered corrugated board, extending a previously published algorithm for single-walled boards. Our method focuses on measuring layer and overall board thickness, flute height, and center lines of each layer. Integrating image processing and genetic algorithms, the research successfully developed an algorithm for precise geometric feature identification of double-walled boards. Images were recorded using a special device with a sophisticated camera and image sensor for detailed corrugated board cross-sections. Demonstrating high accuracy, the method faced limitations only with very deformed or damaged samples. This research contributes significantly to quality control in the packaging industry and paves the way for further automated material analysis using advanced machine learning and image sensors. It emphasizes the importance of sample quality and suggests areas for algorithm refinement to enhance robustness and accuracy.

Artificial intelligence is increasingly used in various branches of engineering. In this article, artificial neural networks are used to predict the crush resistance of corrugated packaging. Among the analysed packages were boxes with ventilation openings, packages with perforations, and typical flap boxes, which makes the proposed estimation method very universal. Typical shallow feedforward networks were used, which are perfect for regression problems, mainly when the set of input and output parameters is small, so no complicated architecture or advanced learning techniques are required. The input parameters of the neural networks are selected so as to take into account not only the material used for the production of the packaging, but also the dimensions of the box and the impact of ventilation holes and perforations on the load capacity of individual walls of the packaging. In order to maximize the effectiveness of neural network training process, the group of input parameters was changed so as to eliminate those to which the sensitivity of the model was the lowest. This allowed the selection of the optimal configuration of training pairs for which the estimation error was on the acceptable level. Finally, models of neural networks were selected, for which the training and testing error did not exceed 10%. The demonstrated effectiveness allows to conclude that the proposed set of universal input parameters is suitable for efficient training of a single neural network model capable of predicting the compressive strength of various types of corrugated packaging.

The paper contains the results of the 100-hour test campaign of the Additive Manufactured (AM) spare part (retainer – slipper) dedicated for an exact axial piston pump. The material of the retainer-slipper has been identified by using energy dispersive spectroscopy and replaced by other – with similar material properties as the original one. The obtained spare part had been subjected to only one postprocessing type (sandblasting) to analyze the influence of the rough part after the AM process. The whole test campaign has been divided into stages, where after each stage microscopic measurements have been made. During microscopical investigation roughness and geometrical measurements were conducted. The results revealed that it is possible to replace parts in hydraulic pumps with the use of AM. 100-hour test campaign caused about 500% increase in the surface roughness of the pump’s original part which was cooperated with the AM spare retainer-slipper, without any damages to the test system.

Background: Myeloid sarcoma (MS), also known as granulocytic sarcoma or chloroma, is a rare disease entity characterized by the emergence of an extramedullary tumour which may be antecedent, coexisting or manifest secondarily to an ongoing malignancy of lymphoid origin. Owing to its low prevalence, scientific reports addressing this matter comprise mainly retrospective studies with a limited number of participants, rather low-quality research and only few case reports. Despite MS’s rarity, the need for enhancing diagnostic tools and refinement of therapeutic regimens is broadly recognised among physicians. Case summary: In this case series, we present the clinical histories of two patients diagnosed with MS. The former (Case 1) exhibited MS of the sternum alongside chronic myeloid leukemia (CML), while in case of the latter (Case 2) MS was the initial manifestation of a current acute myeloid leukemia (AML). Regardless of treatment institution comprising chemotherapy (CHTH) and radiotherapy (RT), the patient afflicted by CML did eventually pass due to cardiorespiratory insufficiency secondary to an infection, whereas the second one is in clinical remission up to this date, that is 16 months since MS had been diagnosed. Furthermore, a comprehensive analysis of previously reported cases was conducted which involves MS in patients with AML and CML. Conclusion: The objective of this report is to emphasize the heterogeneity among the clinical manifestations of MS, to underline the relevance of histopathological and molecular diagnostic tools in opting for the appropriate therapy and that, in spite of it occurring rather uncommonly, physicians should think of MS in presence of pathological masses in patients under risk of hematological malignancies.

The effects of build orientation and heat treatment on the crack growth behavior of 316L stainless steel (SS) fabricated via a selective laser melting (SLM) additive manufacturing process were investigated. Significant growth of available research results of additively manufactured metallic parts still needs to be improved. The most important issue connected with properties after additive manufacturing is properties high anisotropy, especially from the fatigue point of view. The research included crack growth behavior of additively manufactured 316L in comparison to conventionally made reference material. Both groups of samples were obtained using precipitation heat treatment. Different build orientation in additively manufactured samples and rolling direction in reference samples were taken into account as well. Precipitation heat treatment of additively manufactured parts allowed to reach similar microstructure and tensile properties to elements conventionally made. The heat treatment positively affected fatigue properties. Additionally, precipitation heat treatment of additively manufactured elements significantly affected the reduction of fatigue cracking velocity and changed the fatigue cracking mechanism.

The paper aims to study the workflow of the detection center of stealthy attacks on industrial installations that generate increase in energy consumption while avoiding triggering fault detection and damaging the installation. Such long-lasting attacks on industrial facilities make production more expensive and less competitive. We present the concept of the remote detection system of cyberattacks directed at maliciously changing the controlled variable in an industrial process air conditioning system. The monitored signals are gathered at the PLC-controlled installation and sent to the remote detection system, where the discrepancies of signals are analyzed based on the Control Performance Assessment indices. The results of performed tests prove the legitimacy of the adopted approach.

Blood flow-restricted training (BFR) is constantly growing in popularity. Despite growing evidence of the significant influence of BFR training on different body functions, its impact on the vascular system, especially the arteries, is controversial. Therefore, the objective of our study was to analyze how BFR exercise, compared to other types of exercise without restriction of blood flow or other active intervention, influences arterial functions and angiogenesis in adults. Studies comparing the effect of BFR versus non-BFR training on arterial parameters are divided into three categories. Endothelial function, angiogenesis, and other vasculature functions. The search was based on three databases (Cochrane Library, PubMed®, Embase). In this systematic review, 38 studies were included. Meta-analysis revealed a more significant improvement in flow-mediated dilatation (FMD) (p=0.002) and the production of the primary angiogenesis biomarker Vascular Endothelial Growth Factor (VEGF) (p=0.009) after training in BFR compared to nonBFR (p=0.002). Analysis of pulse wave velocity, ankle-brachial index, systolic blood pressure, or heart rate did not show a significant difference in changes between BFR and non-BFR training. Other parameters examined were not sufficiently provided to be included in the meta-analysis. The results obtained, present trends suggesting the significant impact of BFR training on endothelial functions and angiogenesis. Unfortunately, there is still a lack of multicenter randomized clinical trials, including many participants, that are necessary to confirm the advantage of BFR over non-BFR activity.

(1) Background: The stylohyoid syndrome, known as classical Eagle Syndrome (cES), is characterized by calcificatication of the stylohyoid chain with numerous nonspecific symptoms, mainly pain. This study introduces Minimally Invasive Cervical Styloidectomy (MICS). (2) Methods: MICS was performed on sixty-five patients diagnosed with classical Eagle syndrome. Patients underwent meticulous differential diagnosis. Surgical plans were established based on the findings from neck angioCT. (3) Results: The healing process was uneventful without significant complications. The overall success rate was 97.0%, with a follow-up of a minimum of six months. In one case, the surgery did not yield the desired improvement. In one case, a partial relapse of symptoms was observed. (4) Conclusions: MICS is a straightforward and efficient surgical treatment technique for stylohyoid syndrome.

Accurate geometric modeling of blood vessels lumen given their 3D images is a basis for vessel quantification in support of cardiovascular diseases diagnosis, treatment and monitoring. Unlike other approaches, which assume circular or elliptical vessel cross-section, the proposed method employs parametric B-splines combined with the image formation system equations to accurately localize the highly curved lumen boundaries. No image segmentation is involved which might reduce the localization accuracy in effect of spatial discretization. It is shown that the model parameters can be reliably identified by a feedforward neural network which, driven by the cross-section images, predicts the parameter values many times faster than a reference least-squares (LS) model fitting algorithm. Two example applications: modeling the lower extremities artery-vein complexes visualized in steady-state contrast-enhanced magnetic resonance images (MRI) and the coronary arteries pictured in computed tomography angiograms (CTA), are presented and discussed to demonstrate the method potential. Besides application to medical diagnosis, blood-flow simulation and vessel-phantom design, it can serve as a tool for automated annotation of image datasets required to train machine-learning algorithms.

The objective of the present work was to determine the productivity and costs of timber harvesting and skidding during the first commercial thinning of a Scots pine stand. The analyzed harvesting set consisted of a mini-excavator (34 kW) with an stroke harvester head (gripping range: 4–30 cm), and a farm tractor coupled to an logging trailer with a hydraulic crane. Merchantable timber (roundwood with a minimum diameter of 5 cm inside bark) was harvested from a 25-year old planted Scots pine stand growing on a grid of 1.4×1.8 m. The study showed the productivity of the mini-harvester range from 3.09 to 3.47 m3∙PMH15 -1, and that of the forwarding set to be 4.07 m3∙PMH15 -1. The analyzed model of productivity as a function of individual tree volume and thinning intensity was statistically significant, but the intensity parameter was significant only on plots located along wide access trails (3.7 m) and insignificant on plots located along the narrow access trial (2.5m). The intertree distance was not found to be significant. The calculated net machine costs for the forwarding set and mini-harvester were 36.12 Euro∙PMH 1 and 52.47 Euro∙PMH-1, respectively. An increase in the utilization rate of the harvesting set to 80% would reduce the timber harvesting and skidding costs to 22.07 Euro∙m-3.

Free vibration analysis of the porous functionally graded circular plates has been presented on the basis of classical plate theory. The three defined coupled equations of motion of the porous functionally graded circular/annular plate were decoupled to one differential equation of free transverse vibrations of plate. The one universal general solution was obtained as linear combination of the multiparametric special functions for the functionally graded circular and annular plates with even and uneven porosity distributions. The multiparametric frequency equations of functionally graded porous circular plate with diverse boundary conditions were obtained in the exact closed-form. The influences of the even and uneven distributions of porosity, power-law index, diverse boundary conditions and the negligibled effect of the coupling in-plane and transverse displacements on the dimensionless frequencies of the circular plate were comprehensively studied for the first time. The formulated boundary value problem, the exact method of solution and the numerical results for the perfect and imperfect functionally graded circular plates have not yet been reported.

As a part of the proposed article, the authors presented comprehensive data analysis for movement data that comes from a positioning system based on ultra-wide band (UWB) technology. For purpose of this article, a test was carried out during which the car equipped with cruise control overcame the given path at a speed from 10 km/h to 60 km/h. The obtained motion models (information about position) have been filtered through a series of filters - from fundamentals filters with a variable window (median, moving average, Savitzky-Golay filter), through more complex ones like the Wiener or Kalman filter. As a result, the authors proposed a form of data analysis and filtration depending on the speed of the moving object. In addition, the maximum accuracy that can be obtained for a given traffic model was also determined. The whole research proves that it is possible to use a system based on UWB technology in positioning objects for urban applications - smart city, in industry 4.0 applications as well as for positioning autonomous vehicles in urban applications, such as well as on highways to maintain cohesion of convoys vehicles.

The purpose of this review is to present the current knowledge about the diagnostic and treatment options in bladder cancer (BCa) patients with clinically positive lymph nodes (cN+). In this review compaction of CT and MRI performance in preoperative prediction of lymph node invasion (LNI) in BCa patients was presented, along with other diagnostic methods. Most scientific societies do not distinguish cN+ patients in their guidelines, recommendations concern muscle-invasive bladder cancer (MIBC) and differ between associations. Currently, the standard treatment of patients with MIBC is radical cystectomy (RC) with bilateral pelvic lymph node dis-section (PLND). The template of PLND and its therapeutic value remain debatable. Moreover, most guidelines recommend neoadjuvant chemotherapy (NAC). However, there is still lack of definitive evidence of the superiority of neoadjuvant chemotherapy over adjuvant chemotherapy. Nevertheless, the curative treatment that provides the best long-term survival in cN+ patients is a multimodal approach with a combination of chemotherapy and RC. Recent studies demonstrate the growing importance of immunotherapy. Special attention should be paid to cN+ BCa patients as the oncological outcomes are significantly worse for this group.

The fusion of penetrating peptides (PPs), e.g., cell penetration peptides (CPPs), or antimicrobial peptides (AMPs) together with antimicrobial agents is an expanding research field. Specific AMPs, such as lactoferricin B (LfcinB), have demonstrated strong antibacterial, antifungal, and antiparasitic activity, as well as valuable anticancer activity, proving beneficial in the development of anticancer conjugates. The resulting conjugates offer potential dual functionality, acting as both an anticancer and an antimicrobial agent. This is especially necessary in cancer treatment where microbial infections pose a critical risk. Leukemic cells frequently exhibit altered outer lipid membranes compared to healthy cells, making them more sensitive to compounds that interfere with their membrane. In this communication, we revisited and reanalyzed our earlier research on LfcinB and its conjugates. Furthermore, we carried out new experiments with a specific focus on cell proliferation, changes in membrane asymmetric phosphatidylserine location, intracellular reactive oxygen species (ROS) generation, mitochondrial functions, and in vitro bacterial topoisomerase inhibition.

The article discusses the role of humanistic values in the contemporary configuration of cities. Today's times put us in a privileged position as we can observe deep and clear changes happening very quickly. Visible changes are reflected not only in society and culture, but also in the space of developing cities, towns, and metropolises. While characterizing contemporary urban trends and ideas, the philosophical trends that contribute to them and the values on which they are based were discussed. Corrections are also shown, which usually start with slight dissonances and initially slight differences in the content of theses, and as a result lead to completely different views on the world. Contemporary determinants of postmodernism, deconstructivism, ecological ideas, sustainable development, social integration and participation, high-tech, digital, and smart city are discussed in detail.

In the paper the new, fractional order, state space model of a heat transfer in a one- 1 dimensional metallic rod is addressed. The fractional orders of derivative along space and time 2 are not exactly known and they are described by intervals. The proposed model is the interval 3 expanding of the state space fractional model of the one dimensional heat transfer. It is expected to 4 better describe the reality because interval order of each real process is hard to estimate. Elementary 5 properties of the proposed model are analysed. Theoretical results are experimentally validated using 6 data from real experimental laboratory system.

We present the results of calculations of magnetic properties of 3 compounds from Laves phase C15 family: DyAl2, HoAl2 and ErAl2 performed with a new computation system called ATOMIC MATTERS MFA. We compare these findings with the recently published results for TbAl2, GdAl2 and SmAl2. The calculation methodology was based on the localized electron approach applied to describe the thermal evolution electronic structure of rare-earth R3+ ions over a wide temperature range and to compute magnetocaloric effect (MCE). Thermomagnetic properties were calculated based on the fine electronic structure of 4f9, 4f10 and 4f11 configurations of the Dy3+, Ho3+, Er3+ ions, respectively. Our calculations yield the magnetic moment value and direction; single-crystalline magnetization curves in zero field and external magnetic field applied in various directions of m(T, Bext); the 4f-electronic components of specific heat c4f(T, Bext); and temperature dependence of the magnetic entropy and isothermal entropy change with external magnetic field -S(T, Bext). The cubic CEF parameter values used for DyAl2 calculations are taken from earlier research of A.L. Lima, A.O. Tsokol and recalculated for universal cubic parameters (Amn) for the RAl2 series. Our studies reveal the importance of multipolar charge interactions when describing thermomagnetic properties of real 4f electronic systems and the effectiveness of an applied self-consistent molecular field in calculations for magnetic phase transition simulation.

Nitrogen fertilization ensures the proper growth of trees. The aim of the study was to evaluate the impact of differentiated nitrogen fertilization on selected parameters. It was assumed that such analysis is an indirect picture of the needs of cherries grown in herbicide fallow. The content of minerals in two layers of the soil, in leaves, and its influence of tree growth, and the content of chlorophyll in leaves were assessed. The experiments were carried out in three different cherry orchards. Three levels of fertilization were applied in each orchard: 0 kg, 60 kg and with 120 kg N ha- 1. As expected the fertilization resulted in an increase in the content of nitrate and ammonium forms of nitrogen in the soil, however, their content was also dependent on precipitation and temperature. Additionally a high nitrogen fertilization increased the content of phosphorus and potassium and decreased the magnesium in the topsoil layer. High nitrogen fertilization caused the decrease of content of phosphorus and potassium in the leaves. The level of calcium and magnesium in leaves increased with fertilization of 60 kg N ha–1 but decreased with the dose to 120 kg N ha–1. The use of nitrogen fertilization increased the vegetative growth of trees measured by leaf area and trunk cross-sectional area. However, the chlorophyll content was not dependent on the amount of nitrogen fertilization.

Quantum image representation is a widely researched area of quantum computing. Currently developed methods use angle parameter of the rotation gate (e.g., the FRQI method), sequences of qubits (ex. NEQR method) or phase shift (ex. LPIQE method) for storing color information of pixels. All of those methods are affected by decoherence and other classical and quantum noise, which is an inseparable part of quantum computing in a NISQ (Noisy Intermediate Scale Quantum) era. These all phenomenons influence the measurements, its probability distribution over the measurement basis and, as the result, makes the extracted images not even similar to those, which was stored in quantum computers. Since this process is, in its foundation, quantum as well, the computational reversal of this process is possible. There are a lot of methods for error correction, mitigation and reduction, but all of them use quantum computer time, or additional qubits to achieve desired result. We report a successful use of the Generative Adversarial Network tuned for image-to-image translation in conjunction with PDU method, for error reduction in images encoded using LIPQE (Local Phase Image Quantum Encoding) method.

The purpose of the investigation was to determine the relationship between rotary kiln liner loss and steel structure ovality. As measurement apparatus, a terrestrial laser scanner was used. The interior and exterior of the rotary kiln were measured. The primary focus object was inner-lining loss and the geometric characteristics of cylindrical shells. The research uncovered significant disparities in inner lining loss between sections. A correlation was found between ovality and elimination of inner lining. Due to the hypothesis of constant inner linig loss from the middle of the rotary kiln, the investigation found that the loss of brick lining was less than the value reported from the boreholes. The study offers significant information on maintenance and repair strategies for rotary kilns, which have the potential to increase their efficiency and useful life.

In this article authors shows chosen problems of technical state diagnosis with the use of identification and technical diagnostics methods such as experimental modal analysis. Relations between methods of dynamic state evaluation and methods of technical state evaluation were indicated. Example modal analysis results illustrate the complexity of projecting dynamic state researches into diagnostic researches of state evaluation.

Ultra-wide field optical coherence tomography (UWF-OCT) has been recently introduced into clinical ophthalmological practice. To date, there is little data on the reference values of retinal thickness (RT) and choroidal thickness (CT) measured with this technique. This study aimed to analyze the variance of RT and CT in healthy eyes with UWF-OCT tests performed with the largest available scan size of 23 x 20 mm. The data were analyzed with reference to the patients' age, gender, and the axial length of the eyeball. The results of UWF-OCT scanning enabled us to picture the shape of the retina and choroid in a large portion of the eyeball. Both anatomical entities become significantly thinner at the periphery. The peripheral CT is greater in the upper and temporal sectors; the RT is higher in the nasal compared to the temporal sectors. Both choroid and retina lose thickness with age, however, CT and RT do not show a statistically significant correlation with the axial length after adjusting for age and gender. Age-related variations in thickness are especially prominent in the choroid. The CT in UWF-OCT testing is significantly greater in females while the RT is greater in males. UWF-OCT testing provides additional information on the anatomical structure of the retina and choroid compared to standard-field OCT

Wide-field (WF) retinal imaging is becoming a standard diagnostic tool for diseases involving the retinal periphery. Technological progress elicited the advent of wide-field optical coherence tomography (WF-OCT) and WF-OCT angiography (WF-OCTA) examinations. This review presents the results of studies that analyzed the implementation of these procedures in clinical practice and refers to them as traditional and ultra-wide-field fluorescein angiography (UWF-FA). The PUBMED search was performed using the terms WF-OCT OR WF-OCTA OR UWF-FA AND the specific clinical entity, including diabetic retinopathy (DR), retinal vein occlusion (RVO), Coats disease, peripheral retinal telangiectasia, peripheral retinal degeneration, lattice degeneration, and posterior vitreous detachment. The analysis only included the studies in which the analyzed field of view for the OCT or OCTA exam was larger than 55 degrees. The evaluation of the extracted studies indicates that WF imaging with OCT and OCTA provides substantial information on retinal disorders involving the retinal periphery. Vascular diseases, such as DR or RVO, can be reliably evaluated using WF-OCTA with results superior to standard-field fluorescein angiography. Nevertheless, UWF-FA provides a larger field of view and still has advantages over WF-OCTA concerning the evaluation of areas of non-perfusion and peripheral neovascularization. Detailed information on the vascular morphology of peripheral changes should be obtained via WF-OCTA, not angiographic examinations. WF-OCT can serve as a valuable tool for the detection and evaluation of vitreoretinal traction, posterior vitreous detachment, and peripheral retinal degeneration, and guide therapeutic decisions on a patient’s eligibility for surgical procedures.

The article presents the method of identification of dynamic models for different flight states of a rotary-wing UAV. Experimental flights were conducted to obtain data necessary for the identification process. Such models can later be implemented in simulations to represent the behavior of real-life objects. Simulation of UAV swarms is the first stage of developing a swarm system, where prototyping with physical models is problematic. Therefore, obtaining accurate models is crucial for the simulation process to be reliable. Also, verification of obtained models was performed to make sure that they were identified correctly. In particular, the presented method was proven effective and successfully used in some applications.

The consequences of manipulations in structure and amino acid composition of native cyclolinopeptide A (CLA) from linen seeds and its linear precursor on their biological activities and mechanisms of action are reviewed. The modifications included truncation of the peptide chain, replacement of amino acid residues with proteinogenic or non-proteinogenic ones, modifications of peptide bond, and others. The studies revealed changes in the immunosuppressive potency of these analogs investigated in a number of in vitro and in vivo experimental models, predominantly in rodents, as well as differences in their postulated mechanism of action. The modified peptides were compared with cyclosporine A and parent CLA. Some of the synthesized and investigated peptides show potential therapeutic usefulness.

Industries that rely on additive manufacturing of metallic elements, especially biomedical companies, require material science-based knowledge of how process parameters and methods affect element properties, but such phenomena are incompletely understood. In this study, we investigated the influence of selective laser melting (SLM) process parameters and additional heat treatment on mechanical properties. The research included structural analysis of residual stress, microstructure, and scleronomic hardness in low-depth measurements. Tensile tests with element deformation analysis using digital image correlation (DIC) were performed as well. Experiment results showed it was possible to observe the porosity growth mechanism and its influence on material strength. Elements manufactured with 20% lower energy density had almost half the elongation, which was directly connected with porosity growth during energy density reduction. Hot isostatic pressing (HIP) treatment allowed for a significant reduction of porosity and helped achieve properties similar to elements manufactured using different levels of energy density.

The study concentrates on researching possibilities of using computer image analysis and neural modeling in order to assess selected quality discriminants of spray-dried chokeberry powder. The aim of the paper is quality identification of chokeberry powders on account of their highest dying power, the highest bioactivity as well as technologically satisfying looseness of powder. The article presents neural models with vision technique backed up by devices such as digital camera as well as electron microscope. Reduction in size of input variables with PCA has influence on improving the processes of learning data sets, thus increasing effectiveness of identifying chokeberry fruit powders included in digital pictures, which is shown in the results of the conducted research. The effectiveness of image recognition are presented by classifying abilities as well as low Root Mean Square Error (RMSE), for which the best results are achieved with typology of network type Multi-Layer Perceptron (MLP). The selected networks type MLP are characterized by the highest degree of classification at 0.99 and RMSE at 0.11 at most at the same time.

Investigating transportation disasters in Western Asia over two decades (2003-2023), this study provides a meticulous examination of a comprehensive dataset, shedding light on the dynamics and nuances of these catastrophic events in terms of frequency, modality (air, rail, road, and water), and subsequent outcomes. The data reveals a concerning uptrend in mishaps from 2003 to 2010, which fortunately reverses into a notable decline in the subsequent years. Noteworthy is the predominance of road-related incidents, yet an alarming 73.8% of events are ambiguously categorized under "Unknown", hinting at potential gaps or inconsistencies in record-keeping. With Turkey being a significant epicenter, accounting for nearly 45% of all incidents, the regional distribution of these disasters becomes evident. Advanced ANOVA analyses discern marked variations in fatality rates over the years and between nations. However, the contrast in injury rates among different disaster categories did not achieve statistical significance. While the post-2010 era showcases a commendable reduction in calamities, the data punctuates the persistent necessity for robust safety measures, targeted public awareness campaigns, and infrastructural advancements. In synthesis, this study vehemently advocates for heightened regional collaboration and systematic knowledge dissemination as cornerstones for bolstering transportation safety across Western Asia.

Simple Summary: This review explores the origin of Leukemic Stem-Like Cells (LSLCs) from (Very) Small Leukemic Stem-Like Cells ((V)SLSLCs) and Cancer Stem Cells (CSCs) from trans-formed Very Small Embryonic-Like Stem Cells (VSELSCs). Understanding this relation is a step toward uncovering the mechanisms behind cancer and leukemia initiation and development. We explore how these very small precursor cell stages might contribute to the initiation and progres-sion of cancer as well as leukemia with a focus on Acute Myeloid Leukemia (AML) as a model. Abstract: Recent experimental findings indicate that CSCs originate from transformed VSELSCs, which are early precursor stages of healthy stem cells. This discovery marks a crucial step in understanding the mechanisms that drive cancer development and initiation. Our team's follow-up studies on leukemia, lung cancer, and healthy embryonic kidney cells have, for the first time, identified stag-es resembling very small precursor stem cells in continuously growing cell lines. These findings suggest the existence of (Very) Small Cancer Stem Cells ((V)SCSCs) or (V)SLSCs within respective subpopulations of CSCs and LSCs in vivo. In this review, we explore theoretical examples of how leukemia progresses through various stages, highlighting the role of these very small precursor cells as fundament primitive stages. We also discuss the potential implications of further research into these unique cellular stages for advancing cancer and leukemia treatment and prevention strategies.

Schiff bases attract research interest due to their applications in chemical synthesis and medicinal chemistry. In recent years, benitrobenrazide and benserazide containing imine moiety, have been synthesized and characterized as promising inhibitors of hexokinase 2 (HK2) an enzyme overexpressed in most cancer cells. Both compounds possess a common structural fragment, a 2,3,4-trihydroxybenzaldehyde moiety connected through hydrazone or hydrazine linker with acylated on N’-nitrogen atom by serine or 4-nitrobenzoic acid fragment. To avoid presence of toxicophoric nitro group in benitrobenrazide molecule we introduced common pharmacophores 4-fluorophenyl or 4-aminophenyl substituents. Modification of benserazide regards an introduction of other endogenous amino acids instead of serine. Herein we report the synthesis of benitrobenrazide and benserazide analogues and preliminary results of inhibitory activity against HK2 evoked by these structural changes. The derivatives contain a fluorine atom or amino group instead of a nitro group in BNB, exhibited the most potent inhibitory effects against HK2 at a concentration of 1 µM, with HK2 inhibition rates of 60% and 54%, respectively.

Small and medium enterprises (SMEs) are the biggest group of enterprises in the European Union (EU); they are also characteristic for emerging economies. Given this situation, there is a need to provide instruments such as processes, which allows them to realize a model of sustainable development. The ability to classify processes and occurrences happening inside these processes often affects the condition of the enterprises. The implementation of innovations, as identified process, enables the directions of SME development towards sustainable development. The purpose of this article is to find out if the identification of processes such as innovations, have any influence on the competitiveness and sustainable development of SMEs. This study was based on pilot research, which examined small and medium enterprises at the regional level, at the example of Polish emerging economy region. It was researched under the angle of the identification of processes and changes happening inside enterprises in terms of understanding the sustainable development concept. Research composition allows to present an understanding by the SMEs of the problems analyzed. The novelty was in the new questionnaire, the definition of sustainable development, and matching those processes identified by the enterprises analyzed with the particular sustainable development dimensions suggested by the authors. In light of the analysis of the literature and the results of this research the important contributions of this study are as follows. This approach pointed the understanding and practical meaning of the identification of processes to be understood. The most important finding was that there is a need to make entrepreneurs aware of the fact that innovations are also processes in themselves, which often constitutes the sum of other supporting processes occurring in the enterprise. Support in the form of knowledge transfer from experts to SMEs would also be recommended.

Thyroid surgery has been for years one of the most common elective procedures performed in general surgery. In the last 25 years, there have been significant advances in the diagnosis and treatment of thyroid disorders, and new technologies are being implemented. The aim of this study was to ana-lyze 25 years of experience in thyroid surgery in the Department of General, Minimally Invasive and Endocrine Surgery at the Medical University of Wroclaw in terms of demographic changes, indica-tions for surgical treatment, the type of thyroid surgery performed and complications. The impact of recent advances on changes in endocrine surgery was evaluated. For this purpose, clinical material from the years 1996-2020 was analyzed, with a total of 3748 patients (7285 RLN at risk of injury). Period I included the years: 1996-2003, period II: 2011-2015 and 2018-2020. Results: In the last 25 years, the percentage of patients operated on for thyroid cancer has increased threefold (p <0.00001); the extent of thyroid surgery has changed: in 1996-2003, subtotal thyroid operation was performed in more than 90% of patients vs. 1.7% of total thyroid gland surgery; 2011-2015 and 2018-2020 were more than 94% of total thyroid surgery vs. 4% of subtotal surgery (p<0.00001). The increase in the extent of surgery did not affect the percentage of total amount recurrent laryngeal nerve palsy (RLN palsy) (5.17% vs. 4.38% p = 0.1785), it did affect the percentage of transient RLN palsy in group II vs. group I (0.41% vs. 1.34%, p<0.00001), while the percentage of permanent RLN palsy in group I was statistically significantly higher than in group II (4.77% vs. 3.05%, p=0.0016). An increase in the percentage of postoperative clinical hypoparathyroidism in group II was observed: 4.84% vs. 8.93% (p<0.00001). Conclusions: Over 25 years, there has been a significant increase in the number of sur-geries performed for thyroid cancer, the range of surgeries from partial resections to total excision of the thyroid gland has changed, and the increased range of surgeries did not have a statistically signifi-cant effect on the number of vocal fold paralysis, but increased the percentage of postoperative hypo-parathyroidism. Intraoperative neuromonitoring had a significant impact on changing the scope of surgery and preventing complications.

Determining precise boundaries and protective zones for historical and cultural objects enables their effective preservation. This is particularly crucial in the face of increasing tourism, urbanization, and natural disasters. Accurately defining boundaries and protective zones can aid in the planning of scientific research, archaeological excavations, and other studies aimed at exploring the history and cultural significance of these objects. The article presents the framework for establishing protective zones around historical and cultural heritage sites existing in Ukraine, using the example of the Citadel defensive complex located in Lviv (Ukraine). It proposes general and detailed conceptual models for the combined application of remote and non-invasive methods for investigating historical and cultural heritage sites. This conceptual article introduces the theory of integrating radar satellite imaging with ground-based georadar imaging. Additionally, it presents a software module that has been developed to analyze collected data on two-dimensional historical and cultural heritage objects, refine their boundaries, and establish protective zones around them.

One of the most important factors impacting quality of content in Wikipedia is presence of credible sources. By following references readers can verify facts or find more details about described topic. A Wikipedia article can be edited independently in any of over 300 languages, even by anonymous users, therefore information about the same topic may be inconsistent. This also applies to use of references in different language versions of a particular article, so the same statement can have different sources. In this paper we analyzed over 40 million articles from the 55 most developed language versions of Wikipedia to extract information about nearly 200 million references and find the most popular and reliable sources. We presented 10 models for the assessment of the popularity and reliability of the sources based on analysis of meta information about the references in Wikipedia articles, page views and authors of the articles. Using DBpedia and Wikidata we automatically identified the alignment of the sources to a specific domain. Additionally, we analyzed the changes of popularity and reliability in time and identified growth leaders in each considered months. The results can be used for quality improvements of the content in different languages versions of Wikipedia.

Despite the fact that Wikipedia is often criticized for its poor quality, it continues to be one of the most popular knowledge base in the world. Articles in this free encyclopedia on various topics can be created and edited in about 300 different language versions independently. Our research showed that in language sensitive topics quality of information can be relatively better in the relevant language versions. However, in most cases it is difficult for the Wikipedia readers to determine the language affiliation of the described subject. Additionally, each language edition of Wikipedia can have own rules in manual assessing of the content quality. This makes automatic quality comparison of articles between various languages a challenging task. The paper presents results of relative quality and popularity assessment of over 28 million articles in 44 selected language versions. In addition, a comparative analysis of the quality and popularity of articles in some topics was conducted. The proposed method allows to find articles with information of better quality that can be used to automatically enrich other language editions of Wikipedia.

Thyroid surgery rates have tripled over the past 3 decades making it one of the most frequently performed procedures within general surgery. They are associated with the possibility of serious postoperative complications having a significant impact on the patient's quality of life. The recurrent laryngeal nerve (RLN) palsy and the external branch of the superior laryngeal nerve (EBSLN) palsy are, next to hypoparathyroidism and bleeding after operation, one of the most common complications. The introduction of neuromonitoring into thyroid surgery, enabling both confirmation of anatomical integrity and assessment of laryngeal nerve function, was a milestone that has begun a new era in thyroid surgery. The International Neural Monitoring Study Group made standardization of the technique of RLN and EBSLN monitoring during thyroid and parathyroid surgery which increased prevalence of neural monitoring during thyroidectomy. Current status of IONM and benefits of its use have been presented in this publication.

The cosmetics industry is currently looking for innovative ingredients with higher bioactivity and bioavailability for the masses of natural and organic cosmetics. Bioferments are innovative ingredients extracted from natural raw materials by carrying out a fermentation process with appropriate strains of microorganisms. The review was conducted using the SciFinder database with the keywords fermented plant, cosmetics, fermentation. Mainly bioferments are made from plant-based raw materials. The review covers a wide range of fermented raw materials from waste materials (whey with beet pulp) to plant oils (F-Shiunko, F-Artemisia, F-Glycyrrhiza). The spectrum of applications for bioferments is broad and includes properties such as skin whitening, antioxidant properties (blackberry, soybean, goji berry), anti-ageing, anti-aging (red ginseng, black ginseng, Citrus unshiu peel), hydrating and anti-allergic (aloe vera, skimmed milk). Fermentation increases the biochemical and physiological activity of the substrate by converting high-molecular compounds into low-molecular structures, this makes fermented raw materials more compatible compared to unfermented raw materials.

This paper continues the review study on antimicrobial properties relevant to the periodontal diseases. Inflammation as a major response of the periodontal tissues attacked by pathogenic microbes can significantly exacerbate the condition. However, the bidirectional activity of phytochemicals that simultaneously inhibit bacterial proliferation and proinflammatory signaling can provide a substantial alleviation of both cause and symptoms. The modulatory effects on various aspects of inflammatory and overall immune response has been covered, including confirmed and postulated mechanisms of action, structure activity relationships and molecular targets. Further, the clinical relevance of flavan-3-ols and available outcomes from clinical studies has been analyzed and discussed. Among the numerous natural sources of flavan-3-ols and proanthocyanidins the most promising are, similarly to antibacterial properties, constituents of various foods, such as fruits of Vaccinium species, tea leaves, grape seeds, and tannin-rich medicinal herbs. Despite a vast amount of in vitro and cell-based evidence of immunomodulatory there is still much less studies using animal models and only a few clinical studies. Most of the studies, regardless of the used model indicated efficiency of these phytochemicals from cranberries and other Vaccinium species and tea extracts (green or black). Other sources such as grape seeds and traditional medicinal plants, were seldom. In conclusion, the potential of flavan-3-ols and their derivatives in prevention and alleviation of periodontitis is remarkable but clinical evidence is urgently needed for issuing credible dietary recommendation and complementary treatments.

In Wikipedia, articles about various topics can be created and edited independently in each language version. Therefore, quality of information about the same topic depends on language. Any interested user can improve an article and that improvement may depend on popularity of the article. The goal of this study is to show what topics are best represented in different language versions of Wikipedia using results of quality assessment for over 39 million articles in 55 languages. In this paper, we also analyze how popular are selected topics among readers and authors in various languages. We used two approaches to assign articles to various topics. First, we selected 27 main multilingual categories and analyzed all their connections with sub-categories based on information extracted from over 10 million categories in 55 language versions. To classify the articles to one of the 27 main categories we took into account over 400 million links from articles to over 10 million categories and over 26 million links between categories. In the second approach we used data from DBpedia and Wikidata. We also showed how the results of the study can be used to build local and global rankings of the Wikipedia content.

Polymer inclusion membranes (PIMs), which contained cellulose tri-acetate used as a polymer base, a plasticizer in the form of o-NPOE, and meso-tetra methyl tetrakis-[methyl-2-(4-acetlphenoxy)] calix[4]pyrrole (KP) used as a carrier, were prepared and tested for the effective purification of aqueous solutions of methylene blue dye. The scanning electron microscope (SEM), thermogravimetric analysis (TGA), and attenuated total reflection Fourier transform infrared (ATR-FTIR) were used to define the microstructure and surface of PIMs. Experimental results showed that with the increased concentration of methylene blue in an aqueous solution, the removal percentage also increased. Further observation also showed that the flux increased with the rise of the source phase pH values from 3 to 10. The carrier and plasticizer content in the membrane significantly influenced the membrane’s transport properties. The optimal composition of the membrane in per cent by weight was for KP: 74% plasticizer; 18% support; 8% carrier. It was shown that the membrane with optimal composition showed good reusability and enabled the easy and spontaneous separation of methylene blue from aqueous solutions.

The increasing deployment of intermittent renewable energy sources necessitates effective methods for balancing the electrical grid to ensure stability and safety. Energy storage systems that can store excess electrical power during periods of low demand and release it during high demand are crucial for both short-term and long-term applications. Power-to-Gas is an innovative energy storage solution that converts surplus renewable electricity into gas fuels, such as hydrogen, which can be stored and used later. This hydrogen can serve multiple purposes, including energy storage and as fuel for transportation modes like cars, trams, trains, and buses. While most hydrogen today is derived from fossil fuels, solid-oxide electrolysis (SOE) offers a cleaner alternative by producing hydrogen without harmful emissions. SOE is also the most efficient method of electrolysis. This study aims to determine the operational parameters for an SOE system, including lower heating value (LHV)-based efficiency and total input power, using a mathematical model. Results are presented for three different operating temperatures and four different steam utilization ratios. The paper is structured as follows: the introduction provides the context and motivation for the study; the second section outlines the fundamentals of electrolysis and its various types; the third section delves into solid-oxide electrolysis and electrolyser systems; the fourth section describes the methodology, including the mathematical formulation and simulation software used; the fifth section presents the calculation results and conclusions; and the final section summarizes the findings.

The majority of current methods for measuring the angular deflection of a laser beam enable measurement only in one selected plane. However, there are tasks in which measurements of laser beam deflections in 3D are required. In this paper, we present a way of enabling two-axial measurements of the deflection of a beam based on a single-axis sensor. The key idea is to direct a laser beam alternately into one of two arms of a measurement system. In the first arm, the beam is transmitted directly to the angular sensor, while in the second, the beam is directed to the sensor via a special optical element that rotates the plane of the beam deflection; in other words, this element changes the deflection in the horizontal plane into a deflection in the vertical plane, and vice versa. To alternate the path of the beam, a variable phase retarder and a polarising beamsplitter are used. The proposed technique is experimentally verified, and the results confirm its effectiveness.

The European Union's current pressure on Member States to adopt the Green Deal and the Fit for 55 package is leading to an accelerated drive to put in place measures to meet the 2030 climate targets. At the same time, many discussions at international bilateral meetings of EU country representatives raise the question of the realism of setting climate targets and therefore the ability to meet these commitments. The results elaborated in this analytical study offer a realistic picture of the possibilities of meeting strategic climate targets using the example of the use of forest dendromass for the ability to achieve a 22% share of renewable energy sources (RES) in gross final energy consumption by 2030 in the Czech Republic. The study points out that at present the use of forest dendromass from primary pro-duction is at its maximum and meeting the climate targets for increasing the share of RES in the energy mix represents a major problem in the long term. The findings published in this study also point to the objective threat of increased use of dendrmass in the energy sector to the maintenance of sustainable forest management and the preservation of forest quality.

Loss of photoreceptors in retinal degenerative diseases also impacts the inner retina: bipolar cell dendrites retract, neurons rewire and protein expression changes. ON-bipolar cells represent an attractive target for optogenetic vision restoration. However, above-described maladaptations may negatively impact the quality of restored vision. To investigate this question, we employed human post-mortem retinas and transgenic rd1_Opto-mGluR6 mice expressing the optogenetic construct Opto-mGluR6 in ON-bipolar cells and carrying the retinal degeneration rd1 mutation. We found significant changes in delayed rectifier potassium channel expression in ON-bipolar cells of degenerative retinas. In particular, we found an increase in Kv1.3 expression already in early stages of degeneration. Immunohistochemistry localized Kv1.3 channels specifically to OBC axons. In whole-cell patch-clamp experiments, ON-bipolar cells in the degenerated murine retina were less responsive, which could be reversed by application of the specific Kv1.3 antagonist Psora-4. Notably, Kv1.3 block significantly increased the amplitude and kinetics of Opto-mGluR6-mediated light responses in ON-bipolar cells of the blind retina and increased the signal-to-noise ratio of light-triggered responses in retinal ganglion cells. We propose that reduction of Kv1.3 activity in the degenerated retina, either by pharmacological block or by KCNA3 gene silencing, could improve the quality of restored vision.

This article is devoted to the issues of thermal softening of materials in the surface layer of forging tools. The research covers numerical modeling of the forging process, laboratory tests of tempering of nitrided layers and the analysis of tempering of the surface layer of tools in the actual forging process. Numerical modeling was supported by measuring the temperature inside the tools with a thermocouple inserted into the tool to measure the temperature as close to the surface as possible. The modeling results confirmed the possibility of tempering the die material. The results of laboratory tests made it possible to determine the influence of temperature on tempering at different surface layer depths. Numerical analysis and measurement of surface layer microhardness of tools revealed the destructive effect of temperature during forging on the tempering of the nitrided layer and on the material layers located deeper below the nitrided layer.

The study presents a comparison of the common Child Restraint Systems (CRS) which reduces the value of dynamic loads affecting the child's body during car accidents. The analyzed systems were: child seats, Combi Booster Seats, and straps adjusting vehicle seat belts to children's sizes. The effectiveness of the analyzed devices was assessed on the basis of experimental tests carried out in the accredited laboratory approving the Child Restraint Systems. The tests were carried out accordingly to the new Regulation No. 129 UN / ECE. Whether the tested devices meet the guidelines of the new Regulations No. 129 despite approval in accordance with Regulation No. 44. Based on the research result, better safety parameters of some new solutions dedicated to children’s safety could be observed. The final results show that there is still space for improving the safety of young vehicle passengers.

The study presents a comparison of the common Child Restraint Systems (CRS) which reduces the value of dynamic loads affecting the child's body during car accidents. The analyzed systems were: child seats, Combi Booster Seats, and straps adjusting vehicle seat belts to children's sizes. The effectiveness of the analyzed devices was assessed on the basis of experimental tests carried out in the accredited laboratory approving the Child Restraint Systems. The tests were carried out accordingly to the new Regulation No. 129 UN / ECE. Whether the tested devices meet the guidelines of the new Regulations No. 129 despite approval in accordance with Regulation No. 44. Based on the research result, better safety parameters of some new solutions dedicated to children's safety could be observed. The final results show that there is still space for improving the safety of young vehicle passengers.

Astrocytes are considered to possess a noticeable role in brain metabolism and as a partners in neuron-glia cooperation contribute to synthesis, bioconversions and regulation of the flux of substrates for neuronal metabolism. With the aim to investigate to which extend are human astrocytes metabolizing amino acids and by which compounds are they enriching their surrounding we employed the metabolomics analysis of their culture media by 1H-NMR. In addition, we compered the composition of media with either 5 mM or 25 mM glucose. The quantitative analysis of culture media by 1H-NMR revealed that astrocytes readely dispose from their milieu glutamine, branched-chain amino acids, and pyruvate with significantly high rate, while they enrich the culture media with lactate, branched-chain keto acids, citrate, acetate, ketone bodies, and alanine. The hyperglycemia suppressed the capacity of astrocytes to release branched-chain amino acids while stimulating the generation of ketone bodies. Our results highlight the active involvement of astrocytes in metabolism of several amino acids, and the regulation of key metabolic intermediates. The observed metabolic activities of astrocytes provide valuable insights into their roles in supporting neuronal function, brain metabolism, and intercellular metabolic interactions within the brain. Understanding the complex metabolic interactions between astrocytes and neurons is essential for elucidating brain homeostasis and the pathophysiology of neurological disorders.

Crohn's disease (CD) is a chronic, relapsing disorder belonging to inflammatory bowel diseases (IBD). It is manifested by relapsing transmural inflammation found in any segment of the gastrointestinal tract. Chronic fatigue is a common and underrecognized symptom of CD, which prevalence is much higher in the population of CD patients as compared to healthy population. It stems from an intricate web of interactions between various risk factors, and its pathophysiology is still not fully understood. Implementation of routine screening and holistic, multidisciplinary approach involving psychological support may be crucial in management of CD patients with chronic fatigue. There is currently no single intervention aimed at decreasing fatigue alone, and its treatment is especially difficult in patients with fatigue persisting despite clinical and endoscopic remission. Extensive research is still needed in order to be able to predict, prevent, identify and ultimately treat fatigue associated with CD. The aim of this review is to summarize the knowledge on the etiology, diagnosis, and treatment of chronic fatigue in CD patients.

Areas covered with vegetation play a key role for life on Earth and should be inventoried in a clear and complete manner in order to improve the process of its protection and development. Data showing the amount of greenery in areas most deformed by humans, i.e. urbanized areas, are particularly important. Local governments need to know how to invest theirs limited sources in the quality of life of residents by supplementing the urban fabric with additional vegetation. The article presents a proposal for how to calculate the degree of greenness of cities based on remote sensing data. Additionally, a novel method was proposed to help in planning the development of areas covered with vegetation, taking into account the spatial distribution of the local population. The result was a comprehensive method presenting the actual natural situation in a specific city.

Despite Low Power Wide Area Networks’ ability to offer an extended range, it might still encounter challenges with coverage blind spots in the network. This article proposes an innovative energy-efficient nature-inspired relay selection algorithm for LoRa-based LPWAN networks, serving as a solution for challenges related to poor signal range in areas with limited coverage. A behavior swarm-inspired approach has been utilized to select the relays’ localization in the network, providing network energy efficiency and radio signal extension. These relays help bridge communication gaps, significantly reducing the impact of coverage blind spots by forwarding signals from devices with poor direct connectivity with the gateway. The proposed algorithm considers critical factors for the LoRa standard, such as the Spreading Factor or device energy budget analysis. The simulation experiments validate the proposed scheme’s effectiveness in terms of energy efficiency under diverse multi-gateway topology scenarios involving thousands of devices. Specifically, it has been verified that the proposed approach outperforms the reference method in preventing the battery depletion of relays, which is vital for battery-powered IoT devices. Furthermore, for some large-scale problems, the proposed heuristic method achieves over twice the speed of the exact method with a negligible accuracy loss of less than 2%.

Magnetic properties of soft magnetic composites are highly sensitive to the processing conditions. In this paper we focus on the possibility to model this effect using the Jiles-Atherton-Sablik theory. It is assumed that the effect of varying compaction pressure may be described by direct introduction of stress-dependent term in the model equations. The values of model parameters are kept constant. Verification of the proposed approach is carried out using measurement data from self-developed iron-based composite cores.

CuO-ZnO-Al2O3 catalysts are designed for the low-temperature shift conversion in the process of hydrogen and ammonia synthesis gas production. The paper presents the results of research on recovery of copper and zinc from spent catalysts using pyrometallurgical and hydrometallurgical methods. Under reducing conditions, at high temperature, having appropriately selected the composition of the slag, more than 66% of copper in metallic form and about 70% of zinc in the form of ZnO can be extracted from this material. Hydrometallurgical processing of the catalysts was carried out using two leaching solutions: alkaline and acidic. Almost 62% of the zinc contained in the catalysts has been leached to the alkaline solution and about 98% of copper has been leached to the acidic solution. After the hydrometallurgical treatment of the catalysts, insoluble residue was also obtained in the form of pure ZnAl2O4. This compound can be reused to produce catalysts, or it can be processed under reducing conditions at high temperature to recover zinc. The recovery of zinc and copper from such a material is consistent with the policy of sustainable development and helps to reduce the environmental load of stored wastes.

This paper describes research on a unique propulsion system design for a low-speed Biomimetic Unmanned Underwater Vehicle (BUUV). It is biomimetic in the sense that it mimics the movement of aquatic organisms. The undulating propulsion system has numerous advantages over the rotary impeller and is becoming more popular in underwater robotics. The analysis of an artificial seal’s propulsion system with two tail fins is described here. The contrast between the previous undulating propulsion system and the new one is detailed using mathematical analysis and experimental data. The experimental comparison was carried out on a laboratory test stand equipped with specialist sensor equipment to determine the energy efficiency of various types of propulsion systems. Due to a patent procedure, the innovative propulsion system presented in this work has never been published previously. The fins have extra joints, which is the subject of patent claims. The extra joint is intended to improve energy efficiency and reduce fatigue wear on the fins.

Direct-to-blister copper flash smelting slag contains up to 14% of copper and 2-4% of lead. Considering this fact, this material is subjected to the high-temperature reduction process. After this, converting process is performed on the Cu-Pb-Fe alloy being the product of decopperization process in electric furnace. An alternative to the presently used processing of flash smelting slag would be its hydrometallurgical treatment and selective recovery of Pb and Cu. This paper presents the results of laboratory tests on flash smelting slag leaching with citric acid solutions. The experiments performed allowed to determine the process parameters at which the Pb concentration in the post-leaching sediment reached the value of 0.41-0.6% while the Pb content in flash smelting slag was 3.05%. Analogous values for copper were 11.5-11.8% (after leaching) and 12.44% (before). Material after leaching in citric acid solutions can be processed, in the second step, using sulfuric acid solutions, and it could lead to the recovery of almost all copper contained in it.

In the drive towards environmental restoration and sustainable energy solutions, effective utilization and management of agricultural crop residues are vital to mitigate greenhouse gas (GHG) emissions and waste accumulation. Converting biogenic wastes into biofuels and bioproducts has the potential to tackle the energy crisis and contribute to environmental remediation. In this investigation, teff husk, primarily generated in Ethiopia during teff production within the agro-industrial sector, is used as the feedstock for the slow pyrolysis process. In Ethiopia, it is estimated that over 1.75 million tons of teff husk are generated annually, with a significant portion being incinerated in the fields, resulting in substantial environmental pollution. This study focuses on assessing teff husk as a potential material for slow pyrolysis, a crucial stage in biochar production, to tap into its biochar-producing potential. To determine the composition of the biomass, the teff-husk was initially analyzed by thermogravimetry. The significant presence of fixed carbon indicates that teff husk is a viable candidate for pyrolytic conversion into biochar particles. The process of slow pyrolysis took place at three varied temperatures—specifically, at 400, 450, and 500 °C. Process parameters of slow pyrolysis such as reaction time, temperature, and heating rate were enhanced to obtain maximum biochar yields. The highest biochar yield of 43.4 wt% was recorded at optimized reaction time, temperature, and heating rate of 120 min, 400 °C, and 4.2 °C/min, respectively. Furthermore, biochar's physicochemical, SEM-EDX, FTIR, and TGA characterization were performed. The thermal stability and carbon content of biochar were found to rise at higher temperatures. Unlike fuel recovery, the results suggest that teff-husk can be used as a feedstock for biochar production.

There is increasing use of wood-based composites in industry not only because of the shortage of solid wood, but above all for their better properties such as: strength, aesthetic appearance, etc. compared to wood. Medium density fibreboard (MDF) is a wood-based composite that is widely used in the furniture industry. The goal of the research conducted was to determine the effect of the type of coating on the drill cutting blades on the value of thrust force (F_t), cutting torque (M_c), cutting tool temperature (T) and surface roughness of the hole in drilling MDF panels. In the tests three types of carbide drills (HW) were used: not coated, TiAlN coated and ZrN coated. The measurement of both the thrust force and the cutting torque was carried out using an industrial piezoelectric sensor. The temperature of the cutting tool in the drilling process was measured using an industrial temperature measurement system using a K-type thermocouple. It was found that the value of the maximum temperature of the tool in the drilling process depends not only on the cutting speed and feed rate, but also on the type of coating of the cutting tool. The value of both the cutting torque and the thrust force is significantly influenced by the value of the feed rate and the type of drill coating. The effect of varying plate density on the surface roughness of the hole and the variation of the value of the thrust force is also discussed. The results of the investigations were statistically analysed using a multi-factorial analysis of variance (ANOVA).

The study’s objective was to evaluate the influence of thinning on the quality and regularity of yield of 'Regina' cherries grown on a dwarf Gisela 5 rootstock. The experiments were conducted in the years 2009-2012 in Western Poland. Trees were thinned using a chemical agent, ammonium thiosulphate (ATS) at doses of 20g ATS × L-1, 30g ATS × L-1 and 40g ATS × L-1, and by hand, and the results of chemical and hand thinning were compared with those obtained for unthinned trees. The course of weather conditions in winter and during flowering had a significant impact on yield. Chemical thinning is known to be an effective method to regulate fruiting of pome trees, but it can also be successful if applied to cherry trees, as reflected by the alternate bearing index, which was the lowest after applying ATS at a dose of 40g. ATS treatment improved fruit quality in full crop years. Thinning resulted in, among other things, larger and darker fruit and higher content of total soluble solids and titratable acidity. Treatment with 40g ATS × L-1 significantly stimulated the vegetative growth of trees.

The authors undertook pilot studies to assess the accuracy of the reverse engineering process of worn nonstandard spur gears (non-standardized modulus value, unusual profile/pressure angle, high or low teeth), using conventional techniques and measuring instruments. Eight gears were tested, the module of which ranges from 1.020 to 4.98 mm and the number of teeth from 13 to 42. The key parameter, the basic pitch, was selected to estimate the accuracy of the process. The goal is to determine the value of the profile angle. Eleven models were proposed to estimate the nominal tolerance field, using various types of random data distribution. The tested gears were made in IT grade: 6, 7, 8 and 9 according to DIN 3961. Vernier disc micrometers with various measurement ranges were used for research. It has been shown that the nominal module does not have to be treated as a random variable in the population. EIG (Equation of Identity) was developed, allowing conversion of any gear with specific values of geometric parameters into an identical gear with alternative values of these parameters. The directions and degrees of shifts of the estimated tolerance fields relative to the nominal field were determined. The most effective estimating model was selected in the context of the percentage filling of the nominal tolerance field, taking into account the symmetric Student-Fisher distribution with a confidence level of 60%. Further directions of the research activities were described.

In surveying engineering tasks, close-range photogrammetry belongs to leading technology considering different aspects like the achievable accuracy, availability of hardware and software, accessibility to measured objects, or the economy. Hence, constant studies on photogrammetric data processing are desirable. Especially in industrial applications, the control points for close-range photogrammetry are usually measured using total stations. In the case of small objects, more precise positions of control points can be obtained by deploying and adjusting a three-dimensional linear network set up on the object. The article analyzes the accuracy of the proposed method, based on the measurement of the linear network using a tape with a precision of ±1 mm. The experiment shows that the adjusted positions of the network control points can be determined with high, one-millimeter accuracy. The photogrammetric 3D model derived referring to such control points and stereo-images captured with a non-metric camera is also characterized by the highest possible precision, which qualifies the presented method to accurate measurements used in surveying engineering. The authors prove that the distance between two randomly optional points derived from the 3D model of a dimensioned object is equal to the actual distance measured directly on it with one-millimeter accuracy.

In perennial fruit crops, bearing can be influenced by various factors, including environmental conditions, germplasm, rootstocks, and cultivation methods. Cherries, one of the most important and popular fruit species from the temperate climate zone, achieve high prices on the market. New agricultural technologies and environmental factors force a change in the approach to cherry cultivation. Old-type cherry orchards with their high demand for water, nutrients and manual work are replaced by orchards of self-pollinating cherry cultivars grown on dwarf rootstocks. These changes make it necessary to search for ways to regulate fruiting, in particular to thin buds, flower and fruit. In view of environmental regulations and consumer pressure, thinning methods are being sought that either do not involve the use of chemicals or that use eco-friendly chemical agents. This review examines recent progress in understanding the effect of thinning methods on the physiology, tree growth and fruit quality of cherries, discusses horticultural practices aimed to ensure regular cropping and their influence on fruit quality, and provides suggestions for future research.

The paper is focused on numerical modeling of multi-strand cable lines placed in free air. Modeling is carried out within the framework of the so-called multi-physics approach using commercial software. The paper describes in detail the steps undertaken to develop realistic, reliable numerical models of power engineering cables, taking into account their geometries and heat exchange conditions. The results might be of interest to the designers of multi-strand cable systems.

Generative adversarial networks (GAN) opened new possibilities for image processing and analysis. Inpainting, dataset augmentation using artificial samples or increasing spatial resolution of aerial imagery are only a few notable examples of utilizing GANs in remote sensing. This is due to a unique construction and training process expressed as a duel between GAN components. The main objective of the research is to apply GAN to generate an artificial Normalized Difference Vegetation Index (NDVI) using panchromatic images. The NDVI ground-truth labels were prepared by combining RGB and NIR orthophoto. The dataset was then utilized as input for a conditional generative adversarial network (cGAN) to perform an image-to-image translation. The main goal of the neural network was to generate an artificial NDVI image for each processed 256px × 256px patch using only information available in the panchromatic input. The network achieved 0.7569 ± 0.1083 Structural Similarity Index Measure (SSIM), 26.6459 ± 3.6577 Peak Signal-to-Noise Ratio (PNSR) and 0.0504 ± 0.0193 Root-Mean-Square Error (RSME) on the test set. The perceptual evaluation was performed to verify the usability of the method when working with a real-life scenario. The research confirms that the structure and texture of the panchromatic aerial remote sensing image contains sufficient information for NDVI estimation for various objects of urban space. Even though these results can be used to highlight areas rich in vegetation and distinguish them from urban background, there is still room for improvement in terms of accuracy of estimated values. The purpose of the research is to explore the possibility of utilizing GAN to enhance panchromatic images (PAN) with information related to vegetation. This opens interesting possibilities in terms of historical remote sensing imagery processing and analysis. The panchromatic orthoimagery dataset was derived from RGB orthoimagery.

Late pear cultivars, such as ‘Conference’, can be stored for a long period, with their storability depending on storage conditions. A three-year study (2011-2013) compared the impact of half-year storage using four technologies – normal atmosphere, normal atmosphere + 1-methylcyclopropene (1-MCP), controlled atmosphere, controlled atmosphere + 1-MCP – on the quality parameters of ‘Conference’ pears, such as mass loss, firmness, total soluble solids, acidity, antioxidant capacity, and the incidence of diseases and disorders. Additionally, the study analysed different storage conditions in terms of profitability, based on the market prices for pears in the seasons during which the pears were stored. The storage conditions had a very strong influence on the fruit quality parameters, and was found to affect most visibly the mass loss and the incidence of postharvest diseases and disorders. The storage of ‘Conference’ pears for 180 days in normal atmosphere is not economically viable, even if the fruit is subjected to 1-MCP treatment.

Because of ambiguous and widely debated observations concerning incidence trend and management of TC, we performed this analysis. We drew attention to some events, such as “cancer screening activity,” introduction of noninvasive follicular neoplasm with papillary-like nuclear features (NIFTP) to TC types, possibility of papillary thyroid microcarcinoma (PTMC) active surveillance (AS), occurrence of personalized medicine in TC management and finally COVID-19 pandemic time. Because of the opinion that all changes have been made mostly by PTC, we compared it to the rest of types of TC in terms of incidence, clinical and pathological characteristics and treatment. The prevalence of TC significantly increased from 5.15% in 2008 to 13.84% in 2015 and then significantly decreased to 1.33% in 2022 when the pandemic lasted (p<0.0001). A similar trend was observed for PTC, when the incidence significantly increased to 13.99% in 2015 and then decreased to 1.38% in 2022 (p<0.0001). At that time, the NIFTP category was introduced, and observation of PTMC began. The prevalence of FTC and MTC also increased until 2015 and then decreased. Significant differences in age, types of surgery, necessity of reoperation, pTNM, between PTCs and other types of TCs were observed. The average age was significantly lower in PTC patients than in patients with the remaining types of TC (p<0.0001). Four milestones, including NIFTP introduction, the possibility of PTMC AS, personalized cancer medicine and the COVID-19 pandemic, may have influenced the general statistics of TC.

The article presents investigations of rail vehicle bogie of Y25 type. The Y25 bogie family is one of the most commonly used freight car bogie designs. In addition to several significant advantages characterising this design, it also has several disadvantages observed since the beginning of more than fifty years of operation in several types of cargo vehicles. One of these defects observed in real systems is "unsatisfactory running stability", particularly at long straight tracks. The article used commercial engineering software VI-Rail to create a model of the gondola car (type 412W Eaos) with two Y25 bogies. The car model was tested empty and loaded (maximum permissible load). Motion along straight and curved tracks with different radii values was analysed. The vehicle velocity was changed from a few m/s to the maximum values for which stable solutions of the model existed. For each route, a non-linear critical velocity was determined, defining the maximum operating velocity of the modelled car. The model solutions were recorded, while just one was selected to present the results - the first wheelset lateral displacement ylw. The opinion about the "imperfect running quality" in curved tracks was confirmed. The possible appearance of self-exciting wheelset vibrations in the modelled car's operating velocity range in the laden state was also observed. The research results on the impact of the bogie suspension parameters change on the vehicle model stability are presented. The crucial parameter in the bogie suspension was indicated. Reducing its value by several percent about the nominal value increases the critical velocity of the car to values higher than the maximum operating velocity of the modelled vehicle.

Lipid-lowering therapy (LLT) is a cornerstone of atherosclerotic cardiovascular disease prevention. Although LLT might lead to different reductions in low-density lipoprotein cholesterol (LDL-C) levels in women and men, LLT diminishes cardiovascular risk equally effectively in both sexes. Despite similar LLT efficacy, the use of high-intensity statin, ezetimibe, and proprotein convertase subtilisin/kexin type 9 inhibitors is lower in women compared to men. Women achieve the guideline-recommended LDL-C levels less often than men. Greater cholesterol burden is particularly prominent in women with familial hypercholesterolemia. In clinical practice, women and men with dyslipidemia present with different cardiovascular risk profiles and disease manifestations. The concentrations of LDL-C, lipoprotein(a) and other blood lipids differ between women and men over a lifetime. Dissimilar levels of LLT’s target molecules partially result from sex-specific hormonal and genetic determinants of lipoprotein metabolism. Hence, to evaluate a potential need for sex-specific LLT, this comprehensive review (i) describes the impact of sex on lipoprotein metabolism and lipid profile, (ii) highlights sex differences in cardiovascular risk among patients with dyslipidemia, (iii) presents recent, up-to-date clinical trial and real-world data on LLT efficacy and safety in women, and (iv) discusses diverse medical needs of women and men with dyslipidemia and increased cardiovascular risk.

Information regarding the cost of a construction project is available to the investor and project participants in order to determine the subsequent success of a project, given that the information they collect has an impact on the decisions they make. Cost calculations, especially in the initial phase of a project, often generate large errors. This paper presents the new approach based on a combination of the Case Based Reasoning method (CBR) with the originally selected criteria for the description of a construction project (as a result of Pearson correlation coefficient and Spearman's rank correlation coefficient) and Building Information Modeling (BIM) technology. The CBR method fulfils expectations for a simple and fast system supporting the cost estimation process. It does not require any specialist knowledge, so it will be comprehensible to cost estimation practitioners. The BIM-based model gives the opportunity for the calculation of quantity take-offs and enables the use of the information contained in the BIM model in the cost estimation process. In order to prepare the model an appropriate relational database had to be developed. With extensive research, a database of 173 construction projects, including the construction of a sports field, was obtained. There were 14 variables defined originally by authors; however, only 10 (as a result of the correlation analysis) were used for the calculation. Data related to the project were collected in the BIM model. Results estimating the project’s unit price, using the CBR method, were presented and discussed. The Mean Absolute Estimate Error was used to evaluate the model.

A multi-tool analytical practice was used for characterization of 16^th century carpet manufactured in Cairo. Mild extraction method with hydrofluoric acid enabled isolation of intact flavonoids and their glycosides, anthraquinones, tannins and indigoids from fibre samples. High-performance liquid chromatography coupled to spectroscopic and mass spectrometric detectors was used for identification of natural dyes present in the historical samples. Weld, young fustic and brazilwood were identified as the dye sources in yellow thread samples. Red fibres have been colored with lac dye, whereas green fibre shades were obtained with indigo and weld. Tannin-containing plant material in combination with indigo and weld were used to obtain brown hue of thread. Four uncommon and thus-far unknown dye components were also found in the historical samples. These compounds probably represent unique fingerprint of dyed threads from this region. Scanning electron microscopy with energy-dispersive X-ray detector (SEM-EDS) and Fourier transformation infrared spectroscopy (FT-IR) were used for identification and characterization of substrates and mordants present in the historical carpet. Carbon and oxygen were detected in large quantities as a part of the wool protein. The presence of aluminum, iron and calcium indicated their usage as mordants. FT-IR analysis showed bands characteristic to woolen fibres and SEM micrographs definite structure of wool.

Quick and appropriate diagnostics and the use of intraoperative monitoring (IM) of hearing during vestibular schwannoma (VS) resection increase the likelihood of hearing preservation. During surgery, various methods of IM can be used, i.e. auditory brainstem responses (ABR), transtympanic electrocochleography (TT-ECochG) and direct cochlear nerve action potentials. The aim of the study was to evaluate the prognostic values of IM of hearing using ABR and TT-ECochG in predicting postoperative hearing preservation, as well as to evaluate relationships between them during various stages of surgery. This retrospective study presents the pre- and postoperative audiological test results and IM of hearing records (TT-ECochG and ABR) in 75 (43 women, 32 men, aged 18-69) patients with diagnosed VS. The preoperative pure tone average hearing threshold was 25.02 dB HL, while after VS resection it worsened on average by 30.03 dB HL. According to the American Academy of Otolaryngology-Head and Neck Surgery (AAO-HNS) Hearing Classification, before and after (pre/post) the surgery, there were 47/24 patients in hearing class A, 9/8-B, 2/1-C, and 17/42-D. In speech audiometry, the average preoperative speech discrimination score at an intensity of 60 dB SPL was 70.93%, and after VS resection it worsened to 38.93%. The analysis of electrophysiological tests showed that before the tumor removal the I-V ABR interlatencies was 5.06 ms, and after VS resection it was 6.43 ms. The study revealed correlations between worse postoperative hearing and changes in intraoperatively measured ABR and TT-ECochG. IM of hearing is very useful in predicting postoperative hearing in VS patients and increases the chance of postoperative hearing preservation in these patients.

Epidemiological studies have shown a strong association between high body mass index (BMI) and papillary thyroid cancer (PTC). We assessed the clinical and histopathological features of PTC in patients with a higher BMI and compared them to analogous parameters in PTC patients with a normal BMI. We retrospectively analyzed 5,021 medical records of patients admitted and surgically treated for thyroid tumors in one center between 2008 and 2018. Finally, we extracted data from 523 adult patients with PTC and stratified patients into two groups according to BMI: Group 1 with BMI < 25 kg/m² and Group 2 with BMI ≥25 kg/m². Data stratification was performed to estimate the association of overweight and obesity with clinical and histopathological features of PTC in both univariate and multivariate binary logistic regression analyses. Overall, compared to patients with a normal BMI, overweight and obese patients had a greater risk of minimal extrathyroidal extension (minimal ETE), multifocality and bilaterality of PTC (p<0.001 for all). Analysis did not show that BMI was significantly associated with more advanced tumor-node-metastasis (TNM) stage (p=0.894). Obesity and overweight were significantly associated with higher aggressiveness of PTC. When considering various management options for PTC patients, these findings regarding overweight and obesity should be taken into consideration during the decision-making process.

Conformal radiotherapy is a primary treatment in head and neck cancer, which putative adverse effects depend on relatively low doses of radiation delivered to increased volumes of normal tissues. Systemic effects of such treatment include radiation-induced changes in serum lipid profile, yet dose- and volume-dependence of these changes remain to be established. Here we analyzed levels of choline-containing phospholipids in serum samples collected consecutively during the radiotherapy used as the only treatment modality. The LC-MS approach applied in the study enabled the detection and quantitation of 151 phospholipids, including (lyso)phosphatidylcholines and sphingomyelins. No statistically significant differences were found in the pre-treatment samples from patients with different location and stage of cancer. To compensate for potential differences between schemes of radiotherapy the biologically effective doses were calculated and used in the search of correlations with specific lipid levels. We found that the levels of several phospholipids depended on the maximum dose delivered to the gross tumor volume and total radiation energy absorbed by the patient’s body. Increased doses correlated with increased levels of sphingomyelins and reduced levels of phosphatidylcholines. Noteworthy, serum phospholipid levels were associated mainly with volumes of normal tissues irradiated with relatively low doses (i.e., total accumulated dose 20 Gy), which indicated the importance of such effects on the systemic response of the patient’s organism to IMRT.

Materials characterised by magnetorheological properties are non-classic engineering materials. A significant increase in the interest of scientific community in materials from this group can be observed over the recent several years. The results of research presented in this article are oriented on the examination of said materials’ mechanical properties. In order to do so, stress relaxation tests were conducted on cylindrical samples of magnetorheological elastomers loaded with compressive stress for various values of magnetic induction (B1 = 0 mT, B2 = 32 mT, B3 = 48 mT, and B4 = 64 mT) and temperature (T1 = 25° C, T2 = 30° C, and T3 = 40° C). The results of these tests indicate that the stiffness of examined samples increases along with the increase of magnetic field induction and decreases along with the increase of temperature. On this basis, it has been determined that: the biggest stress amplitude change caused by the influence of magnetic field was σ0ΔB = 12.7% and the biggest stress amplitude change caused by the influence of temperature was σ0ΔT = 11.3%. As a result of applying a mathematical model, it has been indicated that the stress relaxation in the examined magnetorheological elastomer for the adopted time range (t = 3600 s) has a hyperbolic decline nature. The collected test results point to examined materials being characterised by extensive rheological properties, which leads to a conclusion that it is necessary to conduct further tests in this scope.

(1) Background: The goal of the study was to evaluate psychological tolerance and health-related quality of life (QOL) in head and neck (HN) cancer patients treated with definitive accelerated radiotherapy (DART); (2) Methods: Seventy-six recurrence-free patients eligible for the study, who were treated with DART in the CAIR-2 phase III clinical study (median of follow-up=47 months), completed EORTC QLQ-C30 with H&amp;N35 module, Hospital Anxiety and Depression Scale (HADS) and Visual–Analog Scales (VAS) of pain in HN and the neck / arm area.; (3) Results: The most dominating symptoms measured with QLQ-C30 were: fatigue (44/100), sleeplessness (39/100), financial problems (38/100) and pain (32/100). Within H&amp;N35 the highest scores were reported on the subscales of sticky saliva (60/100), mouth dryness (65/100) and increased intake of painkillers (50/100). Pain (VAS) was reported by 87% (HN area) and 78% (shoulder) of the patients, with a mean score of 3/10. One-third reported depressive mood (HADS≥15 points) with an average score of 12.5/42 p. The depressed group, who smoked more as compared to non-depressed before DART (96% vs 78%) and required steroids treatment (85% vs 58%) during DART, also scored significantly worse on 23 of 35 subscales of QLQ-C30 and H&amp;N35 and experienced more intense pain (VAS). Women, and less advanced patients scored better in several aspects of the quality of life; (4) Conclusions: Patients treated with DART struggle with low quality of life and persisting treatment-related symptoms including constant pain. HNC survivors, especially those, who are depressed, may require additional psychosocial, rehabilitation and medical intervention programs..

This article discusses the fabrication of pullulan/polyvinyl alcohol (PVA) and PVA blends as carrier polymers for drug delivery. This study utilized coaxial electrospinning to encapsulate doxorubicin (DOX), a common anticancer drug, within nanofibers, which helped mitigate the adverse effects of DOX on normal cells. The study also demonstrated that the coaxial electrospinning technique using PVA/pullulan cores was effective in inhibiting the attachment and proliferation of HeLa cells, a type of cervical cancer cell. The use of pullulan/PVA and PVA blends as carrier polymers in conjunction with coaxial electrospinning could provide a safe and effective drug delivery system for the treatment of cervical and other solid malignancies. The study concluded that nanofibers showed promising results in inhibiting the growth of HeLa cells, indicating their potential as safe and effective drug delivery systems for treating cervical cancer and other solid malignant tumors.

Recently, we isolated and characterized a new pool of mesenchymal stem cells- HPC (Hoof Progenitor Cells), which reside in the coronary corium of equine hooves. We hypothesize, that due to their location, HPC may be involved in the pathogenesis of laminitis, and could possibly be utilized in its treatment. The aim of this study was to compare the newly described HPC to a well-established cell pool-ASC (Adipose Stem Cells). The two cell populations were maintained either in standard culture conditions or under a hyperinsulinemic milieu as hyperinsulinemia is often observed alongside laminitis. Cell cycle dynamics, mitochondrial membrane potential and oxidative stress were analyzed with microcapillary cytometry. Furthermore, the expression of key markers of mitochondrial metabolism, oxidative stress, apoptosis, immunomodulation and insulin signalling were analyzed with the RT-qPCR method. Additionally, a selected panel of miRNA was analyzed with the RT-qPCR method. In standard culture conditions, ASC exhibit higher proliferation than HPC while in hyperinsulinemia a shift towards S phase was observed in both populations. As for the mitochondrial membrane potential, in standard culture conditions, HPC was characterized by a higher percent of live cells. Hyperinsulinemia did not strongly affect the mitochondrial membrane potential of the analyzed populations. Our findings indicate that HPC are characterized by higher activity in terms of mitochondrial dynamics, mitophagy, and mitochondrial biogenesis under standard culture conditions. Yet in both populations, a diminished mitochondrial dynamic and metabolism was observed in hyperinsulinemia. The analysis of oxidative stress revealed, that HPC might possess somewhat higher resistance towards oxidative stress than ASC. Minimal change was observed in the expression of key markers of apoptosis in ASC and HPC under hyperinsulinemia. The analysis of key immunomodulatory markers indicated that HPC may help the cytokine storm for a more effective phenotype change to an immunosuppressing pool of cells with better migratory and healing abilities under hyperinsulinemia than ASC. As for insulin signalling, the obtained data suggests that HPC might be more resistant to hyperinsulinemia and may have greater therapeutic potential in reducing laminitis. Obtained results demonstrated that HPC possesses better potential to modulate the PTEN-AKT pathway by miR-21 and reverse high glucose and high insulin-induced insulin resistance. Taken together, the obtained results indicate that HPC may be a very promising cell pool with therapeutic potential in laminitis treatment, and could be more effective than ASC.

Selective Laser Melting (SLM) is an additive manufacturing technique. It allows to produce elements with very complex geometry using metallic powders. A geometry of manufacturing elements bases only on 3D CAD data. The metal powder is melt selectively layer by layer using ytterbium laser. The paper contains results of porosity and microhardness analysis made on specimens which were manufactured during specially prepared process. Final analysis helped to discover connections between changing hatching distance, exposure speed and porosity. There was no significant differences in microhardness and porosity measurement results in the planes: perpendicular and parallel to the machine building platform surface.

The purpose of the research was to examine and assess the relation between the pilot’s concentration and reaction time with specific brain activity during short-haul flights. In order to obtain this task, participants took part in 1-hour long flight sessions performed on FNPT II class flight simulator. During the flight auto–pilot was activated and subjects were instructed to give response to unexpected events that were occurring during the flight. Brainwaves of each participant were recorded with Emotiv EPOC+ Scientific Contextual EEG device. Statistical analyses of the results were presented in the article.

In this study, Ni50Ti50 powder was coated on the surface of graphite substrate (C) by plasma spraying process using a radio frequency inductively coupled plasma reactor. The coating was carried out by using 12- and 9-kW power under Ar atmosphere. The cross-section of coating layers and the surface were examined with SEM, EDX, XRD analysis and microhardness test. The thickness and quality of the coating increased with input power. Many pores were detected in the cross-sectional surface areas. Higher input power caused a better coating layer in NiTi alloy. The hardness of the coating layer decreases with higher input power.

One of the richest natural sources of resveratrol - the rhizome of Reynoutria japonica in East Asia is a well-known traditional herb (Hu zhang) used in various inflammatory diseases, infections, skin diseases, scald, hyperlipidemia. Although, it has been recently included in the European Pharmacopoeia, still in Europe is an untapped resource. Some of the therapeutic effects are likely to be influenced by its antioxidant properties and this in turn is frequently associated with a high stilbene content. However, some literatures suggested that other compounds than stilbenes may add to the total antioxidant capacity. Hence, the aim of this research was to examine rhizomes of R. japonica and less studied, morphologically similar species, R. sachalinensis and R. x bohemica for their phytochemical composition and antioxidant activity and to clarify the relationship between the antioxidant activity and compounds by statistical methods. HPLC/UV/ESI-MS studies of three Reynoutria species revealed 171 compounds comprising stilbenes, carbohydrates, procyanidins, flavan-3-ols, anthraquinones, phenylpropanoids, lignin oligomers, hydroxycinnamic acids, naphthalenes and their derivatives. Our studies confirmed the presence of procyanidins with high degree of polymerization, up to decamers in the rhizomes of R. japonica and brings new data on the presence of these compounds in other Reynoutria species. A procyanidin trimer digallate was described for the first time in the studied plants. Moreover, we suggested a presence of new for these species, dianthrone glycosides and previously unrecorded phenylpropanoid disaccharide esters and hydroxycinnamic acid derivatives, mainly in R. sachalinensis. Furthemore, compounds tentatively annotated as lignin oligomers were observed for the first time in studied species. The rhizomes of all Reynoutria species exhibited strong antioxidant activity. Statistical analysis demonstrated that proanthocyanidins should be considered as important contributors to the total antioxidant capacity.

This paper describes some of the challenges that need to be addressed in order to develop collaborative spectrum sharing systems. The importance of these challenges stems from the assumption that rules for spectrum sharing can change after the deployment of radio networks and the whole system must be able to adapt to them. To address such a requirement, we used a policy-based approach in which transmissions are controlled by a policy interpreter system, and the policies can be modified during system operation. Our primary goal was to develop a prototype of such a system. In this paper, we outline the implementation of policy interpretation, automatic generation of transmission opportunities in case a request for transmission is denied by the policy reasoner, and the generation of rendezvous channels for the synchronization of otherwise asynchronously running software defined radios.

Due to the ongoing climate change plants face multiple stress factors (mainly the abiotic ones) simultaneously, which means that the reduced yields of critical crops (including wheat, rice, or barley) can be expected. Therefore, our understanding of the light and temperature sensing mechanisms and related signaling is of primary importance. Herein we present a review focused on the direct sensing (ensured via photoreceptors) of light, which is the main abiotic factor driving the development, phenology, and especially resistance against oxidative stress via the increased accumulation of protective metabolites of crops. Thus, in the following text, special attention is paid to the description of the plant photoreceptors, their mode of action, ranges of perception, and related signaling pathways leading to the activation of target transcription factors. These finally lead to alterations in the expression of target genes related to photoprotection. Due to the focus of our research, genes related to the production of phenolic compounds (PheCs) were selected as a representative group of target genes having a UV-screening, and antioxidative function meaning that their activation and activity of resulting proteins can significantly contribute to the increased tolerance of plants against stress cues.

The article describes the use of microwave irradiation in the synthesis of bis(cyclo carbonate) compounds (BCC) in bulk (without solvent) from carbon dioxide capture using an epoxidized compound - a commercial epoxy resin, and compares this process to the conventional method. CO2 cycloaddition to epoxides is an ecological and efficient method for the formation of bis(cyclic carbonates). Moreover, the introduction of gas into the reaction mixture was carried out at atmospheric pressure with a controlled flow rate, which is advantageous from an economic point of view. Progressive structural changes and the presence of characteristic chemical groups were monitored using attenuated total reflectance infrared spectroscopy with Fourier transform. The obtained crude products were purified to obtain three fractions, which were subjected to detailed structural analysis using FT-IR and 13CNMR. The formation of the main product with two cyclic carbonates was confirmed. The presence of monomers, dimers and trimers in individual fractions as well as their thermal stability were determined, and the molecular masses in individual fractions were determined using gel permeation chromatography (GPC).

Introduction: There is no standardised, universal method to assess physical conditions such as pressure in the pelvicalyceal system in real time during RIRS (retrograde intrarenal surgery). Therefore, the problem concerning increased pressure in the upper urinary tract during the procedure is underestimated. Moreover, it potentially may cause micro-damage and longer postoperative recovery. The aim of this study was to evaluate intrapelvic pressure (IPP) during RIRS procedures. Materials and methods: The 3D printed models of the pelvicalyceal system were printed based on CT-scan of real patient. They were used to perform 50 RIRS procedures with laser lithotripsy of artificially synthesised kidney stones with two different sizes of ureteral access sheath-UAS (10/12Fr vs. 12/14Fr) together with different energy settings generated by the holmium:YAG laser. IPP monitoring during RIRS was performed with the use of the PressureWire X Guidewire compatible with the CoroFlow system. Results and Conclusions: The results showed that high IPP of up to 400 cmH2O would be achieved using a 10/12Fr UAS, while the use of a 12/14Fr UAS would significantly reduce the peak pressure to approximately 100 cmH2O, hence the size of the UAS is a pivotal factor of the IPP generated during the procedure.

Rainwater infiltration presents substantial challenges for urban wastewater management systems. This article delves into enhancing the quality of wastewater systems by proposing a novel device designed to tackle this issue comprehensively. The focal point of our research revolves around the conceptualization, construction, rigorous testing, and the potential multifaceted applications of this innovative wastewater device. Our study is dedicated to assessing the viability of a cutting-edge apparatus that empowers municipal entities in swiftly identifying rainwater ingress points within channels during precipitation events. Our findings vividly showcase the device's remarkable capability to directly measure moisture levels along the channel's path, eliminating the arduous need for manual data input, extensive data collection, and intricate water analysis procedures. To ensure the seamless flow of both sewage and water within the sewer channel, the use of a relatively slender strap is conventionally favored. However, factoring in the requisite structural robustness, we recommend a minimum thickness of 4 mm for 3D printing applications. For instances where maintaining the channel's cross-sectional area integrity is paramount, opting for a armlet with wet circuit measurement thickness of up to 7 mm is prudent. In the realm of material selection, our investigation advocates for the utilization of PC/ABS (polycarbonate/ Acrylonitrile Butadiene Styrene), ABS, ASA (Acrylonitrile Styrene Acrylate), or HIPS (High Impact Polystyrene) for the strap housing. For sewer diameters surpassing 315 mm, the application of thin-walled PVC (Poly Vinyl Chloride) emerges as a practical recommendation. Notably, the incorporation of PVC flat bars is discouraged, as their presence might potentially hinder the fluidity of sewage flow, thereby compromising the precision of wet circuit measurements. The pivotal innovation lies in the armlet with wet circuit measurement system, harboring immense potential for broad-scale integration across municipal facilities. This solution emerges as a streamlined and efficient strategy, offering a comprehensive avenue for continuously monitoring, fine-tuning, and optimizing the structural soundness and operational efficacy of sewer systems.

The exploitation of the metallacarboranes’ potential in various fields of research and practical ap-plications requires the availability of convenient and versatile methods for their functionalization with various functional moieties and/or linkers of different types and lengths. Herein we report a study on cobalt bis(1,2-dicarbollide) functionalization at 8,8’-boron atoms with different het-ero-bifunctional moieties containing protected hydroxyl function allowing further modification after deprotection. Moreover, an approach to the synthesis of three and four functionalized metallacarboranes, at boron and carbon atoms simultaneously, via additional functionalization at carbon to obtain derivatives carrying three or four rationally oriented and distinct reactive surfaces, is described

The research presented in this paper concerns the determination of the attraction basins of the Newton’s iterative method which was used to solve the non-linear systems of observational equations associated with the geodetic measurements. The authors considered simple observation systems corresponding to the intersections, or linear and angular resections, used in practice. The main goal was to investigate the properties of the sets of convergent in the initial points of the applied iterative method. An important issue regarding the possibility of automatic and quick selection of such points was also considered. Therefore, the answers to the questions regarding the geometric structure of the basins, their limitations, connectedness or self-similarity were sought. The research also concerned the iterative structures of the basins, i.e. maps of the number of iterations which are necessary to achieve the convergence of the Newton’s method. The determined basins were compared with the areas of convergence that result from theorems on the convergence of the Newton’s method, i.e. the conditions imposed on the eigenvalues and norms of the matrices of the studied iterative systems. One of the essential results of the research is the indication that the obtained basins of attraction contain areas resulting from the theoretical premises and their diameters can be comparable with the sizes of the analyzed geodetic structures. Consequently, in the analyzed cases it is possible to construct methods that enable quick selection of the initial starting points or automation of such selection. The paper also characterizes the global convergence mechanism of the Newton’s method for disconnected basins and, as a consequence, the non-local initial points, i.e. located far from the solution points.

Impact of Nitrogen Foamed Stimulation Fluids Stabilized by Nanoadditives on Reservoir Rocks of Hydrocarbon Deposits

Wikipedia is the most popular and the largest user-generated source of knowledge on the Web. Quality of the information in this encyclopedia is often questioned. Therefore, Wikipedians have developed an award system for high quality articles, which follows the specific style guidelines. Nevertheless, more than 1.2 million articles in Polish Wikipedia are unassessed. This paper considers over 100 linguistic features to determine the quality of Wikipedia articles in Polish language. We evaluate our models on 500,000 articles of Polish Wikipedia. Additionally, we discuss the importance of linguistic features for quality prediction.

The main aim of this study is to investigate the optimization of the technological process for selective laser melting (SLM) additive manufacturing. The group of process parameters considered was selected from the first-stage parameters identified in preliminary research. Samples manufactured using three different sets of parameter values were subjected to static tensile and compression tests. The samples were also subjected to dynamic Split–Hopkinson tests. To verify the microstructural changes after the dynamic tests, microstructural analyses were conducted. Additionally, the element deformation during the tensile tests was analyzed using digital image correlation (DIC). To analyze the influence of the selected parameters and verify the layered structure of the manufactured elements, sclerometer scratch hardness tests were carried out on each sample. Basing on the research results it was possible to observe the porosity growth mechanism and its influence on the material strength (including static and dynamic tests). Parameters modifications that caused 20% lower energy density, elongation of the elements during tensile testing decreased twice, which was strictly connected with porosity growth. An increase of energy density by almost three times caused a significant reduction of force fluctuations differences between both tested surfaces (parallel and perpendicular to the building platform) during sclerometer hardness testing. That kind of phenomenon had been taken into account in the microstructure investigations before and after dynamic testing where it had been spotted a positive impact on material deformations based on fused material grains formation after SLM processing.

In recent decades, large-scale forest disturbances such as windthrow and bark beetle infestations have significantly impacted the carbon balance of Earth and forest ecosystems, mainly by altering soil respiration (SR) in addition to decreased gross primary productivity. SR is considered the second highest flux on Earth, emitting 78-98 Gt C yr-1 to the atmosphere, thus contributing to global warming. Post-disturbance development is marked by changes in the size of SR. To investigate the impact of bark beetle (Ips typographus) infestations in mountain spruce forests on SR, we measured SR at infested sites by bark beetles and adjacent undisturbed stands in the High Tatra Mountains (Slovakia). The measurements were conducted during the vegetation period (May-September) in 2016 and 2017, five to six years after the initial attack by bark beetles, at an altitudinal gradient (1100-1400 m a.s.l.). SR varied throughout different months and altitudes, and we observed that SR at infested sites reached higher values (in most cases) than at uninfested stands. Average monthly and altitude SR rates during both vegetation periods showed higher values at infested sites, but not all of them were statistically significant. We observed an insignificant change in SR rate between 2016 and 2017 at both infested and uninfested sites. The highest rates of SR were observed in 2016 from July to August at both infested and undisturbed sites. On the other hand, in 2017 the highest SR rates were observed in June and July at undisturbed sites and from June to August at infested sites. However, yearly SR from May-September at infested sites showed significantly higher rates than uninfested ones in both years. SR showed a decreasing pattern with elevation gain in 2016 at infested sites. However, this pattern was not observed in 2017. Based on our observation and results we postulate that SR rates at infested sites are boosted by needle fall and debris from dead and dying trees, which increases heterotrophic SR and compensates the decrease of autotrophic SR from tree roots. This study provides important insights into the impact of bark beetle infestations on SR and highlights the need for further research on the long-term effects of forest disturbances on carbon cycling.

The advent of AI in medicine has transformed various medical specialties, including orthodontics. AI has shown promising results in enhancing the accuracy of diagnoses, treatment planning, and predicting treatment outcomes. With the growing number of AI applications and commercially available tools, there is an increase in their usage in orthodontic practices worldwide. This review aims to explore the principles of artificial intelligence (AI), its applications in the diagnostic process of modern orthodontic practices, and concerns associated with the implementation of AI algorithms in clinical practice. A comprehensive review of the literature was conducted, focusing on five categories where AI has been applied in orthodontics: dental diagnostics, cephalometric evaluation, skeletal age determination, temporomandibular joint (TMJ) evaluation, and extraction decision making. AI has demonstrated high efficacy in all those fields. However, variations in performance and the necessity of manual supervision indicate that AI should be used cautiously in clinical settings. Nevertheless, the high complexity and potential unpredictability of AI algorithms call for cautious implementation and regular manual validation of results. Continuous AI learning, proper governance, and addressing privacy and ethical concerns are crucial for the successful integration of AI into orthodontic practice.

Background: The bacterium Capnocytophaga spp. is a part of the oral microbiome of dogs, which has zoonotic potential. This study aimed to assess factors that influence the prevalence of Capnocytophaga cynodegmi and Capnocytophaga canimorsus in Wrocaw’s dog population. Methods: Molecular detection (PCR) involved 105 swabs, examining parameters such as oral cavity condition, underlying health issues, recent antibiotics, age, medications, material collection, and dog chews. Results: The study highlighted significant associations between the presence of Capnocytophaga cynodegmi and oral cavity condition, material collection method, and use of dog’s chews. Conclusions: Correlations obtained in this study between the oral health of Wroclaw's dog population and the presence of Capnocytophaga cynodegmi suggest its significance in the oral microbiome of dogs. Limitations, including the small sample size, highlight the need for more research to comprehensively understand additional factors that affect the prevalence of Capnocytophaga spp. in dogs

The article addresses the issue of reducing the carbon footprint in the formula of the European Union’s New Green Deal using nuclear energy introduced in place of coal. It contains an analysis of the possibilities offered by currently developed concepts of using nuclear energy in the context of existing energy infrastructure in Poland. It indicates the compatibility of coal and nuclear technologies for generating electricity and heat, considering only those with the highest level of technological readiness. The aim of the article is to identify the energy transformation in Poland using nuclear technologies and acquiring, creating and developing knowledge on the subject. It is assumed that the future of coal-nuclear transformation depends on determining where investment processes could take place in Poland, demonstrating the power that can be replaced through transformation, and indicating appropriate coal CPP (Carbon Power Plant) and nuclear NPP (Nuclear Power Plant) technologies with which a roadmap for the development of Polish nuclear energy can be created. The direction of potential actions is shown, whose coordination and implementation requires cooperation between many entities with appropriate knowledge and experience. For the purposes of this article, preliminary research was conducted on the possibilities offered by currently developed concepts in the context of existing energy infrastructure in Poland, its transformation, and the necessary social capital and its sources. The considerations did not take into account power plants and combined heat and power plants that have been liquidated or the use of their remaining infrastructure.

According to the World Health Organization 94% of global malaria cases and 94% of global malaria deaths have been reported from Africa. Unfortunately, it is difficult to determine the exact prevalence of disease in some African countries due to a large number of asymptomatic cases. The aim of this study was to assess the prevalence of malaria infections in seemingly healthy children living in the Central African Republic (CAR). CareStartTM Malaria HRP2 Pf Ag RDT targeting Plasmodium falciparum was used to test a group of 500 asymptomatic children aged 1-15 years old (330 settled Bantu and 170 semi-nomadic BaAka Pygmies) inhabiting the villages in the Dzanga Sangha region (south-west CAR) in March 2020. 32.4% of asymptomatic Bantu and 40.6% of asymptomatic Pygmy children had a positive result of malaria RDT. The mean age of the study participants with RDT (+) was 8.7 in Bantu and 7.0 years in Pygmies; the mean body temperature was 36.8oC in both groups; the mean haemoglobin level was 10.6 g/dL and 10.1 g/dL, respectively. Our findings allowed us to demonstrate the high prevalence of asymptomatic malaria infections in south-west CAR. RDTs seem to be a useful tool for the detection of Plasmodium falciparum in areas with limited possibilities of using other diagnostic methods, such as light microscopy and molecular biology.

Cancer cells utilize a number of mechanisms to increase their survival and progression as well as their resistance to anticancer therapy: deregulation of growth regulatory pathways by acquiring grow factor independence, immune system suppression, reducing the expression of antigens activating T lymphocyte cells (mimicry), induction of anti-apoptotic signals to counter the action of drugs, activation of several DNA repair mechanisms and driving the active efflux of drugs from the cell cytoplasm and epigenetic regulation by microRNAs (miRNAs). Due to the fact that it is commonly diagnosed late, lung cancer remains a major malignancy with a low five-year survival rate; when diagnosed, the cancer is often highly advanced and the cancer cells may have acquired drug resistance. This review summarizes the main mechanisms involved in cisplatin resistance and in interactions between cisplatin-resistant cancer cells and the tumor microenvironment. It also analyses changes in the gene expression profile of cisplatin sensitive vs. cisplatin resistant non–small cell lung cancer (NSCLC) cellular model using the GSE108214 Gene Expression Omnibus database. It describes a protein-protein interaction network that indicates highly-dysregulated TP53, MDM2 and CDKN1A genes as they encodes the top networking proteins that may be involved in cisplatin tolerance, these all being upregulated in cisplatin-resistant cells. Furthermore, it illustrates the multifactorial nature of cisplatin resistance by examining the diversity of dysregulated pathways present in cisplatin-resistant NSCLC cells based on KEGG pathway analysis.

In the lowland forests of south-western Poland, the effect of the fencing of forest regeneration stages, aged up to 20 years, upon the level of damage inflicted by red deer (Cervus elaphus), fallow deer (Dama dama), and roe deer (Capreolus capreolus) in non-fenced patches of this age class of forest was studied. In the studied forest districts (n=4), there was the highest proportion of the mixed coniferous‑deciduous forest types, where the main forest‑forming tree species were pine (Pinus sylvertris), birch (Betula sp.), oak (Quercus sp.), beech (Fagus sylvatica), and spruce (Picea abies). At the forest district level, the percentage of fenced areas in young forest plantations (1‑10‑year old) ranged, on average, from 9.1-30.9%, and that in tickets (11-20‑year old) ranged from 0.0%-10.2%. The percentage of areas of severely damaged young plantations fluctuated between 5.7 and 14.2%, and that of tickets fluctuated between 0.3-12.9%. For young plantations, a statistically significant correlation (“r” ranged from 0.51-0.75) was obtained between percentage of area in fenced plots and the level of damage caused by deer. For thickets, this correlation was obtained solely in Pieńsk Forest District (r = 0.646). In the studied forest districts, the fencing of young plantations and thickets resulted in the reduction of average potential food base for cervids, from 2.9 to 10.0 %. An attempt was made to interpret the level of deer damage on the basis of an index, taking into account the standing crop of deciduous browse and forbs, and the population density of cervids.

The study assessed the changes in the quality and physical and chemical parameters of apples of four cultivars (‘Gala’, ‘Idared’, ‘Topaz’, ‘Red Prince’) subjected to mechanical vibrations during transport under model conditions and after storage (shelf-life). Quality changes in apples were evaluated based on skin and flesh colour, total soluble solids, dry matter, firmness, titratable acidity, pH value, total polyphenol content and antioxidant capacity. The applied vibrations at a frequency of 28 Hz caused changes in the above parameters, which were visible also after storage and depended on cultivar, but did not show any clear trend or direction. Skin colour varied whereas flesh colour remained stable. Vibrations resulted in a decrease in firmness. The greatest stability of quality parameters, the highest content of bioactive compounds and the highest antioxidant capacity were observed for ‘Red Prince’ and ‘Topaz’ apples – this refers to the control and treated samples before and after storage. However, total polyphenol content and antioxidant capacity increased in all studied cultivars as a result of vibrations and storage, which suggests that 28 Hz mechanical vibrations and short-term cold storage did not reduce the health promoting potential of the apples.