Gelatin fibers have a specific surface and high porosity, which is why their use in medicine and the food industry is being researched. This article explores the potential of centrifugal spinning to produce gelatin fibers. Gelatin for fiber preparation is obtained from a non-traditional source of collagen (chicken by-products) using a unique enzymatic process. The fiber quality is compared with those prepared from traditional collagen tissues (porcine, bovine). The results show that fibers crosslinked with glutaraldehyde vapor preserve their structure even in contact with water. Using a cross-linker controls swelling ability and solubility while maintaining the fiber structure. On the contrary, uncross-linked gelatin fibers are water soluble due to a high surface-to-volume ratio, facilitating water penetration and dissolution. Scanning electron microscopy (SEM) provided a clearer picture of the morphology of gelatin fibers obtained by centrifugal spinning. Differences in the amount of bonding depending on the raw material used and the presence of cross-linker were analyzed using Fourier transform infrared spectroscopy (FTIR). The overall results showed that chicken gelatin is a suitable alternative to gelatins from traditional sources.

This article introduces a new way of using a Fibre Bragg Grating (FBG) sensor for detecting the presence and number of occupants in the monitored space in a Smart Home (SH). CO₂ sensors are used to determine the CO₂ concentration of the monitored rooms in an SH. CO₂ sensors can also be used for occupancy recognition of the monitored spaces in SH. To determine the presence of occupants in the monitored rooms of the SH, the newly devised method of CO₂ prediction, by means of an Artificial Neural Network (ANN) with a Scaled Conjugate Gradient (SCG) algorithm using measurements of typical operational technical quantities (indoor temperature, relative humidity indoor and CO₂ concentration in the SH) is used. The goal of the experiments is to verify the possibility of using the FBG sensor in order to unambiguously detect the number of occupants in the selected room (R104) and, at the same time, to harness the newly proposed method of CO₂ prediction with ANN SCG for recognition of the SH occupancy status and the SH spatial location (rooms R104, R203, and R204) of an occupant. The designed experiments will verify the possibility of using a minimum number of sensors for measuring the non-electric quantities of indoor temperature and indoor relative humidity and the possibility of monitoring the presence of occupants in the SH using CO₂ prediction by means of the ANN SCG method with ANN learning for the data obtained from only one room (R203). The prediction accuracy exceeded 90% in certain experiments. The uniqueness and innovativeness of the described solution lie in the integrated multidisciplinary application of technological procedures (the BACnet technology control SH, FBG sensors) and mathematical methods (ANN prediction with SCG algorithm, the Adaptive Filtration with of LMS algorithm) employed for the recognition of number persons and occupancy recognition of selected monitored rooms of SH.

Accurate geometric modeling of blood vessels lumen given their 3D images is a basis for vessel quantification in support of cardiovascular diseases diagnosis, treatment and monitoring. Unlike other approaches, which assume circular or elliptical vessel cross-section, the proposed method employs parametric B-splines combined with the image formation system equations to accurately localize the highly curved lumen boundaries. No image segmentation is involved which might reduce the localization accuracy in effect of spatial discretization. It is shown that the model parameters can be reliably identified by a feedforward neural network which, driven by the cross-section images, predicts the parameter values many times faster than a reference least-squares (LS) model fitting algorithm. Two example applications: modeling the lower extremities artery-vein complexes visualized in steady-state contrast-enhanced magnetic resonance images (MRI) and the coronary arteries pictured in computed tomography angiograms (CTA), are presented and discussed to demonstrate the method potential. Besides application to medical diagnosis, blood-flow simulation and vessel-phantom design, it can serve as a tool for automated annotation of image datasets required to train machine-learning algorithms.

Simple Summary: This review explores the origin of Leukemic Stem-Like Cells (LSLCs) from (Very) Small Leukemic Stem-Like Cells ((V)SLSLCs) and Cancer Stem Cells (CSCs) from trans-formed Very Small Embryonic-Like Stem Cells (VSELSCs). Understanding this relation is a step toward uncovering the mechanisms behind cancer and leukemia initiation and development. We explore how these very small precursor cell stages might contribute to the initiation and progres-sion of cancer as well as leukemia with a focus on Acute Myeloid Leukemia (AML) as a model. Abstract: Recent experimental findings indicate that CSCs originate from transformed VSELSCs, which are early precursor stages of healthy stem cells. This discovery marks a crucial step in understanding the mechanisms that drive cancer development and initiation. Our team's follow-up studies on leukemia, lung cancer, and healthy embryonic kidney cells have, for the first time, identified stag-es resembling very small precursor stem cells in continuously growing cell lines. These findings suggest the existence of (Very) Small Cancer Stem Cells ((V)SCSCs) or (V)SLSCs within respective subpopulations of CSCs and LSCs in vivo. In this review, we explore theoretical examples of how leukemia progresses through various stages, highlighting the role of these very small precursor cells as fundament primitive stages. We also discuss the potential implications of further research into these unique cellular stages for advancing cancer and leukemia treatment and prevention strategies.

The article discusses the role of humanistic values in the contemporary configuration of cities. Today's times put us in a privileged position as we can observe deep and clear changes happening very quickly. Visible changes are reflected not only in society and culture, but also in the space of developing cities, towns, and metropolises. While characterizing contemporary urban trends and ideas, the philosophical trends that contribute to them and the values on which they are based were discussed. Corrections are also shown, which usually start with slight dissonances and initially slight differences in the content of theses, and as a result lead to completely different views on the world. Contemporary determinants of postmodernism, deconstructivism, ecological ideas, sustainable development, social integration and participation, high-tech, digital, and smart city are discussed in detail.

We present the results of calculations of magnetic properties of 3 compounds from Laves phase C15 family: DyAl2, HoAl2 and ErAl2 performed with a new computation system called ATOMIC MATTERS MFA. We compare these findings with the recently published results for TbAl2, GdAl2 and SmAl2. The calculation methodology was based on the localized electron approach applied to describe the thermal evolution electronic structure of rare-earth R3+ ions over a wide temperature range and to compute magnetocaloric effect (MCE). Thermomagnetic properties were calculated based on the fine electronic structure of 4f9, 4f10 and 4f11 configurations of the Dy3+, Ho3+, Er3+ ions, respectively. Our calculations yield the magnetic moment value and direction; single-crystalline magnetization curves in zero field and external magnetic field applied in various directions of m(T, Bext); the 4f-electronic components of specific heat c4f(T, Bext); and temperature dependence of the magnetic entropy and isothermal entropy change with external magnetic field -S(T, Bext). The cubic CEF parameter values used for DyAl2 calculations are taken from earlier research of A.L. Lima, A.O. Tsokol and recalculated for universal cubic parameters (Amn) for the RAl2 series. Our studies reveal the importance of multipolar charge interactions when describing thermomagnetic properties of real 4f electronic systems and the effectiveness of an applied self-consistent molecular field in calculations for magnetic phase transition simulation.

The purpose of the investigation was to determine the relationship between rotary kiln liner loss and steel structure ovality. As measurement apparatus, a terrestrial laser scanner was used. The interior and exterior of the rotary kiln were measured. The primary focus object was inner-lining loss and the geometric characteristics of cylindrical shells. The research uncovered significant disparities in inner lining loss between sections. A correlation was found between ovality and elimination of inner lining. Due to the hypothesis of constant inner linig loss from the middle of the rotary kiln, the investigation found that the loss of brick lining was less than the value reported from the boreholes. The study offers significant information on maintenance and repair strategies for rotary kilns, which have the potential to increase their efficiency and useful life.

The corrugated board is a versatile and durable material that is widely used in the packaging industry. Its unique structure provides strength and cushioning, while its recyclability and bio-degradability make it an environmentally friendly option. The strength of corrugated board depends on many factors, including the type of individual papers on flat and corrugated layers, the geometry of the flute, temperature, humidity, etc. This paper presents a new approach to analysis geometric features of corrugated boards based on the images. It allows for precise determination of the geometry of the corrugated layer, as well as the thickness of individual papers in all cardboard layers. The experimental set used in the work and the created software are characterized by high reliability and precision of measurement thanks to the use of an identification procedure based on image analysis and evolutionary algorithms. This allows to quickly find the main geometric characteristics of the corrugated board, which in turn leads to the possibility of performing numerical analyzes taking into account the real model of the corrugated board. Calculations made on a real (correctly mapped geometrically) model allow, for example, a more reliable analysis of the composition of the cardboard, and thus also to obtain greater savings in the optimization process.

The article focuses on derivation of simplified predictive models for identification of overall compressive stiffness and strength of corrugated cardboards. As a representative example an unsymmetrical 5-ply sample (with E and B flute) was used in this study. In order to exclude unreliable displacement measurement in the standard edge crush test, the virtual strain gauges are used. Video extensometry is employed here to collect measurements from the outer surfaces of the sample on both sides. Additional data allows for obtaining real force-displacement curves, which are used in the validation procedure. To emulate the experimental results, beside simple analytical model, also a 3D numerical model fully reflecting the geometry of the corrugated board, based on finite elements method was also built. In both cases a good agreement between the experimental results and the analytical and numerical calculations was observed. This proves that the proposed analytical model can be successfully used to determine the overall stiffness and compressive strength of the corrugated board, provided that the geometry and properties of all the layers of the board are known. The simple model presented in this work enables quick and reliable design and prototyping of new assemblies without the need to manufacture them.

Corrugated board, widely used in the packing industry, is a recyclable and durable material. Its strength and cushioning, influenced by geometry, environmental conditions like humidity and temperature, and paper quality, make it versatile. Double-walled (or five-ply) corrugated board, comprising two flutes and three liners, enhances these properties. This study introduces a novel approach to analyze 5-layered corrugated board, extending a previously published algorithm for single-walled boards. Our method focuses on measuring layer and overall board thickness, flute height, and center lines of each layer. Integrating image processing and genetic algorithms, the research successfully developed an algorithm for precise geometric feature identification of double-walled boards. Images were recorded using a special device with a sophisticated camera and image sensor for detailed corrugated board cross-sections. Demonstrating high accuracy, the method faced limitations only with very deformed or damaged samples. This research contributes significantly to quality control in the packaging industry and paves the way for further automated material analysis using advanced machine learning and image sensors. It emphasizes the importance of sample quality and suggests areas for algorithm refinement to enhance robustness and accuracy.

The increasing deployment of intermittent renewable energy sources necessitates effective methods for balancing the electrical grid to ensure stability and safety. Energy storage systems that can store excess electrical power during periods of low demand and release it during high demand are crucial for both short-term and long-term applications. Power-to-Gas is an innovative energy storage solution that converts surplus renewable electricity into gas fuels, such as hydrogen, which can be stored and used later. This hydrogen can serve multiple purposes, including energy storage and as fuel for transportation modes like cars, trams, trains, and buses. While most hydrogen today is derived from fossil fuels, solid-oxide electrolysis (SOE) offers a cleaner alternative by producing hydrogen without harmful emissions. SOE is also the most efficient method of electrolysis. This study aims to determine the operational parameters for an SOE system, including lower heating value (LHV)-based efficiency and total input power, using a mathematical model. Results are presented for three different operating temperatures and four different steam utilization ratios. The paper is structured as follows: the introduction provides the context and motivation for the study; the second section outlines the fundamentals of electrolysis and its various types; the third section delves into solid-oxide electrolysis and electrolyser systems; the fourth section describes the methodology, including the mathematical formulation and simulation software used; the fifth section presents the calculation results and conclusions; and the final section summarizes the findings.

In the introductory part of this review, the relevant results of mostly the latest experimental studies on carotenoid absorption and availability in the human body are briefly presented. The subsequent parts summarise such topics as carotenoid carriers, body transport and tissue delivery, before finally reporting on molecular-level studies of carotenoid binding by membrane receptors. The main message of the review is contained in the section describing computational investigations of carotenoid intercalation and dynamic behaviour in lipid bilayers. The relevance of these computational studies lies in showing the direct link between the microscopic behaviour of molecules and the characteristics of their macroscopic ensembles. Furthermore, studying the interactions between carotenoids and lipid bilayers, and certainly proteins, on the molecular- and atomic-level using computational methods facilitates interpretation and explanation of the macroscopic properties of these systems and, hopefully, helps to better understand the biological functions of carotenoids.

This paper continues the review study on antimicrobial properties relevant to the periodontal diseases. Inflammation as a major response of the periodontal tissues attacked by pathogenic microbes can significantly exacerbate the condition. However, the bidirectional activity of phytochemicals that simultaneously inhibit bacterial proliferation and proinflammatory signaling can provide a substantial alleviation of both cause and symptoms. The modulatory effects on various aspects of inflammatory and overall immune response has been covered, including confirmed and postulated mechanisms of action, structure activity relationships and molecular targets. Further, the clinical relevance of flavan-3-ols and available outcomes from clinical studies has been analyzed and discussed. Among the numerous natural sources of flavan-3-ols and proanthocyanidins the most promising are, similarly to antibacterial properties, constituents of various foods, such as fruits of Vaccinium species, tea leaves, grape seeds, and tannin-rich medicinal herbs. Despite a vast amount of in vitro and cell-based evidence of immunomodulatory there is still much less studies using animal models and only a few clinical studies. Most of the studies, regardless of the used model indicated efficiency of these phytochemicals from cranberries and other Vaccinium species and tea extracts (green or black). Other sources such as grape seeds and traditional medicinal plants, were seldom. In conclusion, the potential of flavan-3-ols and their derivatives in prevention and alleviation of periodontitis is remarkable but clinical evidence is urgently needed for issuing credible dietary recommendation and complementary treatments.

Crohn's disease (CD) is a chronic, relapsing disorder belonging to inflammatory bowel diseases (IBD). It is manifested by relapsing transmural inflammation found in any segment of the gastrointestinal tract. Chronic fatigue is a common and underrecognized symptom of CD, which prevalence is much higher in the population of CD patients as compared to healthy population. It stems from an intricate web of interactions between various risk factors, and its pathophysiology is still not fully understood. Implementation of routine screening and holistic, multidisciplinary approach involving psychological support may be crucial in management of CD patients with chronic fatigue. There is currently no single intervention aimed at decreasing fatigue alone, and its treatment is especially difficult in patients with fatigue persisting despite clinical and endoscopic remission. Extensive research is still needed in order to be able to predict, prevent, identify and ultimately treat fatigue associated with CD. The aim of this review is to summarize the knowledge on the etiology, diagnosis, and treatment of chronic fatigue in CD patients.

The majority of current methods for measuring the angular deflection of a laser beam enable measurement only in one selected plane. However, there are tasks in which measurements of laser beam deflections in 3D are required. In this paper, we present a way of enabling two-axial measurements of the deflection of a beam based on a single-axis sensor. The key idea is to direct a laser beam alternately into one of two arms of a measurement system. In the first arm, the beam is transmitted directly to the angular sensor, while in the second, the beam is directed to the sensor via a special optical element that rotates the plane of the beam deflection; in other words, this element changes the deflection in the horizontal plane into a deflection in the vertical plane, and vice versa. To alternate the path of the beam, a variable phase retarder and a polarising beamsplitter are used. The proposed technique is experimentally verified, and the results confirm its effectiveness.

The European Union's current pressure on Member States to adopt the Green Deal and the Fit for 55 package is leading to an accelerated drive to put in place measures to meet the 2030 climate targets. At the same time, many discussions at international bilateral meetings of EU country representatives raise the question of the realism of setting climate targets and therefore the ability to meet these commitments. The results elaborated in this analytical study offer a realistic picture of the possibilities of meeting strategic climate targets using the example of the use of forest dendromass for the ability to achieve a 22% share of renewable energy sources (RES) in gross final energy consumption by 2030 in the Czech Republic. The study points out that at present the use of forest dendromass from primary pro-duction is at its maximum and meeting the climate targets for increasing the share of RES in the energy mix represents a major problem in the long term. The findings published in this study also point to the objective threat of increased use of dendrmass in the energy sector to the maintenance of sustainable forest management and the preservation of forest quality.

Loss of photoreceptors in retinal degenerative diseases also impacts the inner retina: bipolar cell dendrites retract, neurons rewire and protein expression changes. ON-bipolar cells represent an attractive target for optogenetic vision restoration. However, above-described maladaptations may negatively impact the quality of restored vision. To investigate this question, we employed human post-mortem retinas and transgenic rd1_Opto-mGluR6 mice expressing the optogenetic construct Opto-mGluR6 in ON-bipolar cells and carrying the retinal degeneration rd1 mutation. We found significant changes in delayed rectifier potassium channel expression in ON-bipolar cells of degenerative retinas. In particular, we found an increase in Kv1.3 expression already in early stages of degeneration. Immunohistochemistry localized Kv1.3 channels specifically to OBC axons. In whole-cell patch-clamp experiments, ON-bipolar cells in the degenerated murine retina were less responsive, which could be reversed by application of the specific Kv1.3 antagonist Psora-4. Notably, Kv1.3 block significantly increased the amplitude and kinetics of Opto-mGluR6-mediated light responses in ON-bipolar cells of the blind retina and increased the signal-to-noise ratio of light-triggered responses in retinal ganglion cells. We propose that reduction of Kv1.3 activity in the degenerated retina, either by pharmacological block or by KCNA3 gene silencing, could improve the quality of restored vision.

This article is devoted to the issues of thermal softening of materials in the surface layer of forging tools. The research covers numerical modeling of the forging process, laboratory tests of tempering of nitrided layers and the analysis of tempering of the surface layer of tools in the actual forging process. Numerical modeling was supported by measuring the temperature inside the tools with a thermocouple inserted into the tool to measure the temperature as close to the surface as possible. The modeling results confirmed the possibility of tempering the die material. The results of laboratory tests made it possible to determine the influence of temperature on tempering at different surface layer depths. Numerical analysis and measurement of surface layer microhardness of tools revealed the destructive effect of temperature during forging on the tempering of the nitrided layer and on the material layers located deeper below the nitrided layer.

The study presents a comparison of the common Child Restraint Systems (CRS) which reduces the value of dynamic loads affecting the child's body during car accidents. The analyzed systems were: child seats, Combi Booster Seats, and straps adjusting vehicle seat belts to children's sizes. The effectiveness of the analyzed devices was assessed on the basis of experimental tests carried out in the accredited laboratory approving the Child Restraint Systems. The tests were carried out accordingly to the new Regulation No. 129 UN / ECE. Whether the tested devices meet the guidelines of the new Regulations No. 129 despite approval in accordance with Regulation No. 44. Based on the research result, better safety parameters of some new solutions dedicated to children’s safety could be observed. The final results show that there is still space for improving the safety of young vehicle passengers.

The study presents a comparison of the common Child Restraint Systems (CRS) which reduces the value of dynamic loads affecting the child's body during car accidents. The analyzed systems were: child seats, Combi Booster Seats, and straps adjusting vehicle seat belts to children's sizes. The effectiveness of the analyzed devices was assessed on the basis of experimental tests carried out in the accredited laboratory approving the Child Restraint Systems. The tests were carried out accordingly to the new Regulation No. 129 UN / ECE. Whether the tested devices meet the guidelines of the new Regulations No. 129 despite approval in accordance with Regulation No. 44. Based on the research result, better safety parameters of some new solutions dedicated to children's safety could be observed. The final results show that there is still space for improving the safety of young vehicle passengers.

Lipid-lowering therapy (LLT) is a cornerstone of atherosclerotic cardiovascular disease prevention. Although LLT might lead to different reductions in low-density lipoprotein cholesterol (LDL-C) levels in women and men, LLT diminishes cardiovascular risk equally effectively in both sexes. Despite similar LLT efficacy, the use of high-intensity statin, ezetimibe, and proprotein convertase subtilisin/kexin type 9 inhibitors is lower in women compared to men. Women achieve the guideline-recommended LDL-C levels less often than men. Greater cholesterol burden is particularly prominent in women with familial hypercholesterolemia. In clinical practice, women and men with dyslipidemia present with different cardiovascular risk profiles and disease manifestations. The concentrations of LDL-C, lipoprotein(a) and other blood lipids differ between women and men over a lifetime. Dissimilar levels of LLT’s target molecules partially result from sex-specific hormonal and genetic determinants of lipoprotein metabolism. Hence, to evaluate a potential need for sex-specific LLT, this comprehensive review (i) describes the impact of sex on lipoprotein metabolism and lipid profile, (ii) highlights sex differences in cardiovascular risk among patients with dyslipidemia, (iii) presents recent, up-to-date clinical trial and real-world data on LLT efficacy and safety in women, and (iv) discusses diverse medical needs of women and men with dyslipidemia and increased cardiovascular risk.

A multi-tool analytical practice was used for characterization of 16^th century carpet manufactured in Cairo. Mild extraction method with hydrofluoric acid enabled isolation of intact flavonoids and their glycosides, anthraquinones, tannins and indigoids from fibre samples. High-performance liquid chromatography coupled to spectroscopic and mass spectrometric detectors was used for identification of natural dyes present in the historical samples. Weld, young fustic and brazilwood were identified as the dye sources in yellow thread samples. Red fibres have been colored with lac dye, whereas green fibre shades were obtained with indigo and weld. Tannin-containing plant material in combination with indigo and weld were used to obtain brown hue of thread. Four uncommon and thus-far unknown dye components were also found in the historical samples. These compounds probably represent unique fingerprint of dyed threads from this region. Scanning electron microscopy with energy-dispersive X-ray detector (SEM-EDS) and Fourier transformation infrared spectroscopy (FT-IR) were used for identification and characterization of substrates and mordants present in the historical carpet. Carbon and oxygen were detected in large quantities as a part of the wool protein. The presence of aluminum, iron and calcium indicated their usage as mordants. FT-IR analysis showed bands characteristic to woolen fibres and SEM micrographs definite structure of wool.

Nanocellulose (CNC) seems to be a promising surfactant, which, together with expandable graphite (EG), forms the essence of an effective natural-based fire retardant wood coating. In our research, the most suitable composition of the mixture was tested concerning good solubility, dispersion, and consistency. Favorable results were achieved with the formulation composed of a 4% CNC alkaline solution with 80 wt.% of selected EG. Subsequently, six different EG were used to prepare these wood fire retardant coatings. The effectiveness of treatments was verified using a test with a radiant heat source, where the test samples' relative weight loss, relative burning rate, and surface temperature during 600 sec were evaluated. All prepared formulations can be characterized as more or less equally effective. However, the best results were obtained with EG of GG 200 – 100 N, where the mass loss of the sample was 8.10 ± 1.24%. Very good results were also achieved by graphite 25 E + 180 HPH (8.70 ± 0.89%), which is similar to the previous one, even according to the microscopic assessment of the coating as well as the expanded layer. Graphite type 25 K + 180 (8.86 ± 0.65 %) shows the expanded layer's best cohesion, coating uniformity, and ease of application. The results of this work confirmed that the CNC coating itself has significant retardation effects.

This article discusses the fabrication of pullulan/polyvinyl alcohol (PVA) and PVA blends as carrier polymers for drug delivery. This study utilized coaxial electrospinning to encapsulate doxorubicin (DOX), a common anticancer drug, within nanofibers, which helped mitigate the adverse effects of DOX on normal cells. The study also demonstrated that the coaxial electrospinning technique using PVA/pullulan cores was effective in inhibiting the attachment and proliferation of HeLa cells, a type of cervical cancer cell. The use of pullulan/PVA and PVA blends as carrier polymers in conjunction with coaxial electrospinning could provide a safe and effective drug delivery system for the treatment of cervical and other solid malignancies. The study concluded that nanofibers showed promising results in inhibiting the growth of HeLa cells, indicating their potential as safe and effective drug delivery systems for treating cervical cancer and other solid malignant tumors.

One of the richest natural sources of resveratrol - the rhizome of Reynoutria japonica in East Asia is a well-known traditional herb (Hu zhang) used in various inflammatory diseases, infections, skin diseases, scald, hyperlipidemia. Although, it has been recently included in the European Pharmacopoeia, still in Europe is an untapped resource. Some of the therapeutic effects are likely to be influenced by its antioxidant properties and this in turn is frequently associated with a high stilbene content. However, some literatures suggested that other compounds than stilbenes may add to the total antioxidant capacity. Hence, the aim of this research was to examine rhizomes of R. japonica and less studied, morphologically similar species, R. sachalinensis and R. x bohemica for their phytochemical composition and antioxidant activity and to clarify the relationship between the antioxidant activity and compounds by statistical methods. HPLC/UV/ESI-MS studies of three Reynoutria species revealed 171 compounds comprising stilbenes, carbohydrates, procyanidins, flavan-3-ols, anthraquinones, phenylpropanoids, lignin oligomers, hydroxycinnamic acids, naphthalenes and their derivatives. Our studies confirmed the presence of procyanidins with high degree of polymerization, up to decamers in the rhizomes of R. japonica and brings new data on the presence of these compounds in other Reynoutria species. A procyanidin trimer digallate was described for the first time in the studied plants. Moreover, we suggested a presence of new for these species, dianthrone glycosides and previously unrecorded phenylpropanoid disaccharide esters and hydroxycinnamic acid derivatives, mainly in R. sachalinensis. Furthemore, compounds tentatively annotated as lignin oligomers were observed for the first time in studied species. The rhizomes of all Reynoutria species exhibited strong antioxidant activity. Statistical analysis demonstrated that proanthocyanidins should be considered as important contributors to the total antioxidant capacity.

This paper describes some of the challenges that need to be addressed in order to develop collaborative spectrum sharing systems. The importance of these challenges stems from the assumption that rules for spectrum sharing can change after the deployment of radio networks and the whole system must be able to adapt to them. To address such a requirement, we used a policy-based approach in which transmissions are controlled by a policy interpreter system, and the policies can be modified during system operation. Our primary goal was to develop a prototype of such a system. In this paper, we outline the implementation of policy interpretation, automatic generation of transmission opportunities in case a request for transmission is denied by the policy reasoner, and the generation of rendezvous channels for the synchronization of otherwise asynchronously running software defined radios.

Polymer inclusion membranes (PIMs), which contained cellulose tri-acetate used as a polymer base, a plasticizer in the form of o-NPOE, and meso-tetra methyl tetrakis-[methyl-2-(4-acetlphenoxy)] calix[4]pyrrole (KP) used as a carrier, were prepared and tested for the effective purification of aqueous solutions of methylene blue dye. The scanning electron microscope (SEM), thermogravimetric analysis (TGA), and attenuated total reflection Fourier transform infrared (ATR-FTIR) were used to define the microstructure and surface of PIMs. Experimental results showed that with the increased concentration of methylene blue in an aqueous solution, the removal percentage also increased. Further observation also showed that the flux increased with the rise of the source phase pH values from 3 to 10. The carrier and plasticizer content in the membrane significantly influenced the membrane’s transport properties. The optimal composition of the membrane in per cent by weight was for KP: 74% plasticizer; 18% support; 8% carrier. It was shown that the membrane with optimal composition showed good reusability and enabled the easy and spontaneous separation of methylene blue from aqueous solutions.

In this study, Ni50Ti50 powder was coated on the surface of graphite substrate (C) by plasma spraying process using a radio frequency inductively coupled plasma reactor. The coating was carried out by using 12- and 9-kW power under Ar atmosphere. The cross-section of coating layers and the surface were examined with SEM, EDX, XRD analysis and microhardness test. The thickness and quality of the coating increased with input power. Many pores were detected in the cross-sectional surface areas. Higher input power caused a better coating layer in NiTi alloy. The hardness of the coating layer decreases with higher input power.

Due to the ongoing climate change plants face multiple stress factors (mainly the abiotic ones) simultaneously, which means that the reduced yields of critical crops (including wheat, rice, or barley) can be expected. Therefore, our understanding of the light and temperature sensing mechanisms and related signaling is of primary importance. Herein we present a review focused on the direct sensing (ensured via photoreceptors) of light, which is the main abiotic factor driving the development, phenology, and especially resistance against oxidative stress via the increased accumulation of protective metabolites of crops. Thus, in the following text, special attention is paid to the description of the plant photoreceptors, their mode of action, ranges of perception, and related signaling pathways leading to the activation of target transcription factors. These finally lead to alterations in the expression of target genes related to photoprotection. Due to the focus of our research, genes related to the production of phenolic compounds (PheCs) were selected as a representative group of target genes having a UV-screening, and antioxidative function meaning that their activation and activity of resulting proteins can significantly contribute to the increased tolerance of plants against stress cues.

In recent decades, large-scale forest disturbances such as windthrow and bark beetle infestations have significantly impacted the carbon balance of Earth and forest ecosystems, mainly by altering soil respiration (SR) in addition to decreased gross primary productivity. SR is considered the second highest flux on Earth, emitting 78-98 Gt C yr-1 to the atmosphere, thus contributing to global warming. Post-disturbance development is marked by changes in the size of SR. To investigate the impact of bark beetle (Ips typographus) infestations in mountain spruce forests on SR, we measured SR at infested sites by bark beetles and adjacent undisturbed stands in the High Tatra Mountains (Slovakia). The measurements were conducted during the vegetation period (May-September) in 2016 and 2017, five to six years after the initial attack by bark beetles, at an altitudinal gradient (1100-1400 m a.s.l.). SR varied throughout different months and altitudes, and we observed that SR at infested sites reached higher values (in most cases) than at uninfested stands. Average monthly and altitude SR rates during both vegetation periods showed higher values at infested sites, but not all of them were statistically significant. We observed an insignificant change in SR rate between 2016 and 2017 at both infested and uninfested sites. The highest rates of SR were observed in 2016 from July to August at both infested and undisturbed sites. On the other hand, in 2017 the highest SR rates were observed in June and July at undisturbed sites and from June to August at infested sites. However, yearly SR from May-September at infested sites showed significantly higher rates than uninfested ones in both years. SR showed a decreasing pattern with elevation gain in 2016 at infested sites. However, this pattern was not observed in 2017. Based on our observation and results we postulate that SR rates at infested sites are boosted by needle fall and debris from dead and dying trees, which increases heterotrophic SR and compensates the decrease of autotrophic SR from tree roots. This study provides important insights into the impact of bark beetle infestations on SR and highlights the need for further research on the long-term effects of forest disturbances on carbon cycling.

Artificial intelligence is increasingly used in various branches of engineering. In this article, artificial neural networks are used to predict the crush resistance of corrugated packaging. Among the analysed packages were boxes with ventilation openings, packages with perforations, and typical flap boxes, which makes the proposed estimation method very universal. Typical shallow feedforward networks were used, which are perfect for regression problems, mainly when the set of input and output parameters is small, so no complicated architecture or advanced learning techniques are required. The input parameters of the neural networks are selected so as to take into account not only the material used for the production of the packaging, but also the dimensions of the box and the impact of ventilation holes and perforations on the load capacity of individual walls of the packaging. In order to maximize the effectiveness of neural network training process, the group of input parameters was changed so as to eliminate those to which the sensitivity of the model was the lowest. This allowed the selection of the optimal configuration of training pairs for which the estimation error was on the acceptable level. Finally, models of neural networks were selected, for which the training and testing error did not exceed 10%. The demonstrated effectiveness allows to conclude that the proposed set of universal input parameters is suitable for efficient training of a single neural network model capable of predicting the compressive strength of various types of corrugated packaging.

The advent of AI in medicine has transformed various medical specialties, including orthodontics. AI has shown promising results in enhancing the accuracy of diagnoses, treatment planning, and predicting treatment outcomes. With the growing number of AI applications and commercially available tools, there is an increase in their usage in orthodontic practices worldwide. This review aims to explore the principles of artificial intelligence (AI), its applications in the diagnostic process of modern orthodontic practices, and concerns associated with the implementation of AI algorithms in clinical practice. A comprehensive review of the literature was conducted, focusing on five categories where AI has been applied in orthodontics: dental diagnostics, cephalometric evaluation, skeletal age determination, temporomandibular joint (TMJ) evaluation, and extraction decision making. AI has demonstrated high efficacy in all those fields. However, variations in performance and the necessity of manual supervision indicate that AI should be used cautiously in clinical settings. Nevertheless, the high complexity and potential unpredictability of AI algorithms call for cautious implementation and regular manual validation of results. Continuous AI learning, proper governance, and addressing privacy and ethical concerns are crucial for the successful integration of AI into orthodontic practice.

Cancer cells utilize a number of mechanisms to increase their survival and progression as well as their resistance to anticancer therapy: deregulation of growth regulatory pathways by acquiring grow factor independence, immune system suppression, reducing the expression of antigens activating T lymphocyte cells (mimicry), induction of anti-apoptotic signals to counter the action of drugs, activation of several DNA repair mechanisms and driving the active efflux of drugs from the cell cytoplasm and epigenetic regulation by microRNAs (miRNAs). Due to the fact that it is commonly diagnosed late, lung cancer remains a major malignancy with a low five-year survival rate; when diagnosed, the cancer is often highly advanced and the cancer cells may have acquired drug resistance. This review summarizes the main mechanisms involved in cisplatin resistance and in interactions between cisplatin-resistant cancer cells and the tumor microenvironment. It also analyses changes in the gene expression profile of cisplatin sensitive vs. cisplatin resistant non–small cell lung cancer (NSCLC) cellular model using the GSE108214 Gene Expression Omnibus database. It describes a protein-protein interaction network that indicates highly-dysregulated TP53, MDM2 and CDKN1A genes as they encodes the top networking proteins that may be involved in cisplatin tolerance, these all being upregulated in cisplatin-resistant cells. Furthermore, it illustrates the multifactorial nature of cisplatin resistance by examining the diversity of dysregulated pathways present in cisplatin-resistant NSCLC cells based on KEGG pathway analysis.

In the lowland forests of south-western Poland, the effect of the fencing of forest regeneration stages, aged up to 20 years, upon the level of damage inflicted by red deer (Cervus elaphus), fallow deer (Dama dama), and roe deer (Capreolus capreolus) in non-fenced patches of this age class of forest was studied. In the studied forest districts (n=4), there was the highest proportion of the mixed coniferous‑deciduous forest types, where the main forest‑forming tree species were pine (Pinus sylvertris), birch (Betula sp.), oak (Quercus sp.), beech (Fagus sylvatica), and spruce (Picea abies). At the forest district level, the percentage of fenced areas in young forest plantations (1‑10‑year old) ranged, on average, from 9.1-30.9%, and that in tickets (11-20‑year old) ranged from 0.0%-10.2%. The percentage of areas of severely damaged young plantations fluctuated between 5.7 and 14.2%, and that of tickets fluctuated between 0.3-12.9%. For young plantations, a statistically significant correlation (“r” ranged from 0.51-0.75) was obtained between percentage of area in fenced plots and the level of damage caused by deer. For thickets, this correlation was obtained solely in Pieńsk Forest District (r = 0.646). In the studied forest districts, the fencing of young plantations and thickets resulted in the reduction of average potential food base for cervids, from 2.9 to 10.0 %. An attempt was made to interpret the level of deer damage on the basis of an index, taking into account the standing crop of deciduous browse and forbs, and the population density of cervids.

Staphylococcal bacteriophages of Kayvirus genus are candidates for therapeutic applications. One of their proteins, Tgl, is slightly similar to staphylococcal virulence factors, secreted autolysins of lytic transglycosylase motifs, IsaA and SceD. We show that Tgl is also a lytic enzyme secreted by bacterial transport system and localizes to cell peripheries, like IsaA and SceD. It caused lysis of E. coli cells expressing the cloned tgl gene, but could be overproduced when depleted of signal peptide. S. aureus cells producing Tgl lysed in the presence of nisin, which mimics the action of phage holin. In vitro, Tgl protein was able to destruct S. aureus cell walls. The production of Tgl decreased S. aureus tolerance to vancomycin, unlike the production of SceD, which is associated with the decreased sensitivity to vancomycin. In the genomes of kayviruses, the tgl gene is located a few genes away from gene lysK, encoding the major endolysin. While lysK is a late phage gene, tgl can be transcribed by a host RNA polymerase, as are phage early genes. Taken together our data indicate that tgl is a part of kayviruses lytic module and encodes an additional endolysin which can act in concert with LysK in cell lysis.

Bioactive compound profiles in organic and conventional sweet basil were analyzed by HPLC, and the enzymatic status and antioxidant status of plants cultivated with the two systems were also examined. Unique chemical compound locations in the basil leaves were also estimated by fluorescence microscopy. The experiment was conducted from 2019-2021. Organic and conventional basil samples were obtained directly from the largest Polish herb producers. The results showed that the chemical structures of organic and conventional basil leaves are different. Not only cultivation method but also experimental year had a significant impact on the antioxidants content in basil leaves. Organic basil contained significantly more dry matter (11.97 g 100 g-1 FW) compare to conventional one (10.54 g 100g-1 FW) and showed a higher tendency for total phenolic (5.24 mg g -1 DW) concentrations than conventional basil (4.99 mg g-1 DW). The higher bioactive compound content reflects the antioxidant activity ( 61.0%, 54.33% and 46%) in organic basil compare to conventional 46.87%, 38.055 and 39.24%), respectively to analysis method (ABTS, DPPH and FRAP), as well catalase activity (39 µmol H2O2 min-1 mg-1) in organic compare to conventional (23.19 µmol H2O2 min-1 mg-1) of examined basil plants. The obtained results are a very unique and could be used by herbs producers as a key for q high quality basil production.

The observation of persons in the acute phase of ischemic stroke (IS) allowed to select a group of patients whose spontaneous motor activity stood out from the typical clinical picture of the hemiplegia syndrome. It has been noticed that these persons have presented tendency to shift the body weigh toward more affected side and the tendency to move the upper and / or the lower limb (not covered by the neurological syndrome) in simple, repetitive patterns. The purposes of this study were: to define noted kind of behavior, and to select symptoms which can predict the occurrence it. Persons (n=222) hospitalized due to first-time IS were as-signed to 3 groups. A: 78 persons with no lateralization of the neurological syndrome (LoNS). B: 109 persons with LoNS, O+: 35 persons, who at the beginning of hospitalization presented, apart from LoNS, charac-teristic motor symptoms. Persons underwent therapy depending on the neurological symptoms. If the pa-tient demonstrated the potential symptoms for overactivity of the less affected side (OLAS), to confirm it, trial therapy was performed. The predictive symptoms, selected among these from the index day, for the occurrence OLAS in sitting were distinguished: asymmetry in supine and simple, repetitive movements of nonparetic upper extremity.

The main scope of the presented paper is an assessment of the potential repellent effect of selected essential oils (EOs) against Alphitobius diaperinus, which can cause economic losses in storages and poultry industry. Due to development of pesticide resistance in A. diaperinus populations, as well as an attempt to limit extensive usage of potentially harmful pesticides in food-related industries, there is a strong need for development of alternative methods of management of A. diaperinus infestations. Because of cost-effectiveness, availability and low vertebrate toxicity EOs are promising agents in pest management. In presented paper four of-the-shelf EOs: mint, vanilla, lemon and citronella (and their mixtures) were tested as a potential repellents. Moreover, novel preference assay providing an extended analysis of preference and the locomotor response was used. The most effective EOs were, respectively: citronella and lemon. EOs mixtures were generally more repellent than single EOs, with lemon and vanilla 1:1 mixture acting as the strongest repellent. Few of tested EOs caused significant alterations in locomotor activity, although direct relation wasn’t observed. In conclusion, EOs can be potentially used as a repellent agents in A. diaperinus management. Additionally, data on locomotor activity may lead to better design of pull-push strategies in pest management.

Flavan-3-ols and their oligomeric forms called proanthocyanidins are polyphenolic compounds occurring in several foodstuffs and in many medicinal herbs. Their consumption is associated with numerous health benefits. Their bioactivities include antioxidant, anti-inflammatory, cytoprotective, as well as antimicrobial. The latter property is important in prevention and treatment of periodontal diseases. Periodontitis is a multifactorial polymicrobial infection characterized by a destructive inflammatory process affecting the periodontium. Using non-toxic and efficient natural products such as flavanol derivatives can significantly contribute to alleviating of periodontitis symptoms and prevent the disease progress. In this paper, we systematically review the state-of-the art in antibacterial effects of these compounds from the viewpoint of gum health. There is a significant evidence supporting an importance of antibacterial action exerted by proanthocyanidins from edible fruits, tea and medicinal herbs in inhibition of periodontitis-causing pathogens.

Background: Myeloid sarcoma (MS), also known as granulocytic sarcoma or chloroma, is a rare disease entity characterized by the emergence of an extramedullary tumour which may be antecedent, coexisting or manifest secondarily to an ongoing malignancy of lymphoid origin. Owing to its low prevalence, scientific reports addressing this matter comprise mainly retrospective studies with a limited number of participants, rather low-quality research and only few case reports. Despite MS’s rarity, the need for enhancing diagnostic tools and refinement of therapeutic regimens is broadly recognised among physicians. Case summary: In this case series, we present the clinical histories of two patients diagnosed with MS. The former (Case 1) exhibited MS of the sternum alongside chronic myeloid leukemia (CML), while in case of the latter (Case 2) MS was the initial manifestation of a current acute myeloid leukemia (AML). Regardless of treatment institution comprising chemotherapy (CHTH) and radiotherapy (RT), the patient afflicted by CML did eventually pass due to cardiorespiratory insufficiency secondary to an infection, whereas the second one is in clinical remission up to this date, that is 16 months since MS had been diagnosed. Furthermore, a comprehensive analysis of previously reported cases was conducted which involves MS in patients with AML and CML. Conclusion: The objective of this report is to emphasize the heterogeneity among the clinical manifestations of MS, to underline the relevance of histopathological and molecular diagnostic tools in opting for the appropriate therapy and that, in spite of it occurring rather uncommonly, physicians should think of MS in presence of pathological masses in patients under risk of hematological malignancies.

The effects of build orientation and heat treatment on the crack growth behavior of 316L stainless steel (SS) fabricated via a selective laser melting (SLM) additive manufacturing process were investigated. Significant growth of available research results of additively manufactured metallic parts still needs to be improved. The most important issue connected with properties after additive manufacturing is properties high anisotropy, especially from the fatigue point of view. The research included crack growth behavior of additively manufactured 316L in comparison to conventionally made reference material. Both groups of samples were obtained using precipitation heat treatment. Different build orientation in additively manufactured samples and rolling direction in reference samples were taken into account as well. Precipitation heat treatment of additively manufactured parts allowed to reach similar microstructure and tensile properties to elements conventionally made. The heat treatment positively affected fatigue properties. Additionally, precipitation heat treatment of additively manufactured elements significantly affected the reduction of fatigue cracking velocity and changed the fatigue cracking mechanism.

Fusing data from many sources helps to achieve higher results of analysis. In this work, we present a new algorithm to fuse data from multiple cameras with data from multiple lidars. This algorithm was developed to increase the sensitivity and specificity of autonomous vehicle perception systems, where the most accurate sensors measuring the vehicle’s surroundings are cameras and lidar devices. Perception systems based on data from one type of sensor do not use complete information and have lower quality. The camera provides two-dimensional images; lidar produces three-dimensional point clouds. We developed a method for matching pixels on a pair of stereoscopic images using dynamic programming inspired by an algorithm to match sequences of amino acids used in bioinformatics. We improve the quality of the basic algorithm using additional data from edge detectors. We also improve the algorithm performance by reducing the size of matched pixels determined by available car speeds. We perform point cloud densification in the final step of our method, fusing lidar output data with stereovision output. We implemented our algorithm in C++ with Python API, and we provided the open-source library named Stereo PCD. This library very efficiently fuses data from multiple cameras and multiple lidars. In the article, we present the results of our approach to benchmark databases in terms of quality and performance. We compare our algorithm with other popular methods.

he present experiment concerns deposition of ZnO by ALD and subsequent growth of nanowires by chemical bath. We used a novel AISI 301 steel substrate with mechanical parameters that make it suitable to use as a piezoelectric component in an energy harvesting device. We found out that a thin layer of another oxide below ZnO provides outstanding adhesion. Without it, ZnO exhibits island growth and is mechanically unstable. Such prepared samples were placed under repeated mechanical stress. They showed a piezoelectric signal which is stable after hundreds of actuations. This shows good promise for use of our device based on ZnO, an earth-abundant and non-toxic material, as an alternative to widespread in piezo components but environmentally unfriendly PZT. The piezo layers generated enough power for operations performed by a IoT chip. The designed measurement setup allowed for the demonstration of an application of AISI 301 steel substrate coated with ZnO by atomic layer and chemical bath deposition techniques as a piezoelectric component capable of generating energies usable in Internet of Things applications.

In the Czech Republic, the Universal Soil Loss Equation provides the basis for defining the soil protection strategy. Field rainfall simulators were used to define the actual cover-management factor values of the most extensively seeded crops in the Czech Republic. More than 380 simulations between 2016 and 2021 provided data. The methodology focused on multi-seasonal measurements to cover the most important phenological phases. A comparison with the original USDA values for maize showed that it is desirable to redefine the C-factor. 71 fallow plot experiments showed that the rainfall-runoff relation is much easier to replicate than the actual sediment transport. For 30-minute intensive rainfall, the runoff ratio reached 62%, and the coefficient of variation was 25%. On saturated soil, the runoff ratio reached 81% and the coefficient of variation dropped to 12%. Soil protection techniques have a significant effect on runoff reduction. Maize seeded after cover crops and combined with reduced tillage or direct seeding can reduce the runoff ratio to 10-20% for ‘dry’ conditions and to 12-40% for ‘saturated’ conditions. Concerning soil loss, the variations are greater, with the coefficient of variation reaching 42% during fallow plot experiments. The reader should consider associated uncertainties.

Cellular senescence is characterized by permanent proliferation and migration arrest, senescence-associated secretory phenotype (SASP), and oxidative stress. Senescent vascular smooth muscle cells (VSMCs) contribute to cardiovascular diseases and atherosclerotic plaque instability. To establish and characterize a model of replicative senescence (RS), human aortic VSMCs were serially passaged to represent different stages of RS such as young proliferating cells and old/senescent non-proliferating cells. More than 50% of old cells stained positive for the senescence-associated β-galactosidase compared to 20% of young cells. Old cells have a slower proliferation rate, a migratory activity reduced by 50%, but increased levels of TP53 and of cell cycle inhibitors p21/p16 expression, and accumulate in the G1 phase. Old cells showed a flattened appearance and enlarged and regular nuclei, and downregulation of the expression of LMNB1 and HMGB1. Old cells showed also an increased expression of SASP molecules (IL1β, IL6, IL8, and MMP3). Moreover, among a set of 12 manually selected long non-coding RNAs (lncRNAs), we detected significant upregulation of PURPL and NEAT1. We observed also increased levels of RRAD mRNA. The detection of novel molecular markers of senescence, such as RRAD, PURPL, and NEAT1, could be helpful for future studies on potential anti-aging factors.

This paper presents a computational approach designed to construct and query a literature-based knowledge graph for predicting novel drug therapeutics. The main objective is to offer a platform that discovers drug combinations from FDA-approved drugs and accelerates their investigations by domain scientists. Specifically, the paper introduced the following algorithms: (1) an algorithm for constructing the knowledge graph from drug, gene, and disease mentions in the biomedical literature; (2) an algorithm for vetting the knowledge graph from drug combinations that may pose a risk of drug interaction; (3) and two querying algorithms for searching the knowledge graph by a single drug or a combination of drugs. The resulting knowledge graph had 844 drugs, 306 gene/protein features, and 19 disease mentions. The original number of drug combinations generated was 2,001. We queried the knowledge graph to eliminate noise generated from chemicals that are not drugs. This step resulted in 614 drug combinations. When vetting the knowledge graph to eliminate the potentially risky drug combinations, it resulted in predicting 200 combinations. Our domain expert manually eliminated extra 54 combinations which left only 146 combination candidates. Our three-layered knowledge graph, empowered by our algorithms, offered a tool that predicted drug combination therapeutics for scientists who can further investigate from the viewpoint of drug targets and side effects.

Electric mobility begins to enter East-African markets. This paper aims to investigate what policy level solutions and stakeholder constellations are established in the context of e-mobility in Dar es Salaam, Kigali, Kisumu and Nairobi and in which ways they attempt to tackle implementation of electric mobility solutions. The study employs two key methods including content analysis of policy and programmatic documents as well as interviews based on purposive sampling ap-proach with stakeholders involved in mobility transitions. The study findings point out that transport operators and their representative associations are less recognized as major players in the transition, far behind new e-mobility players (start-ups) and public authorities. The study further indicates that a set of financial and technical barriers persist such as high upfront invest-ment costs in vehicles and infrastructure, or anxieties regarding competitiveness with fossil fuel vehicles, that constrain the uptake of such private e-mobility initiatives. This study concludes by identifying current gaps that need to be tackled by policy makers and stakeholders in order to implement inclusive electric mobility in East-African cities, considering modalities that include transport providers and address their financial constraints.

Background and Aims: Liver cirrhosis leads to clinically significant portal hypertension. Transjugular intrahepatic portosystemic shunt (TIPS) has been shown to effectively reduce the degree of portal hypertension and treat its complications. However, poor nutritional status has been shown to be associated with hepatic encephalopathy, acute on chronic liver failure, and mortality following TIPS placement. The purpose of this systematic review is to create another perspective and evaluate the effect of TIPS placement on the nutritional status of patients with liver cirrhosis. Methods: A comprehensive search of four major electronic databases was conducted to identify studies that assessed the nutritional status of cirrhotic patients before and after TIPS placement. The risk of bias was evaluated using ROBINS-I guidelines. Results: Fifteen studies were analyzed in this review. The results indicate that among the 11 studies that evaluated changes in ascites-free weight and body mass index or body cell mass, 10 reported an improvement in one or more measures. Furthermore, all 7 studies that evaluated changes in muscle mass demonstrated an increase in muscle mass. Among the 4 studies that evaluated subcutaneous fat tissue, 3 showed a significant expansion, while 2 out of 3 studies evaluating visceral fat tissue reported a significant reduction. Conclusion: The results of this systematic review suggest that TIPS placement is associated with improvement in the nutritional status of cirrhotic patients, indicated by an increase in ascites-free weight, body mass index, and muscle mass. Additionally, TIPS placement leads to a shift in the distribution of fat mass, with a preference for subcutaneous over visceral adipose tissue. Notably, sarcopenic patients seem to benefit the most from TIPS placement in terms of the nutritional status.

Given its exceptional attributes, aerogel is viewed as a material with immense potential. Being a natural polymer, cellulose offers the advantage of being both replenishable and capable of breaking down naturally. Cellulose-derived aerogels encompass the replenish ability, biocompatible nature, and ability to degrade naturally inherent in cellulose, along with additional benefits like minimal weight, extensive porousness, and expansive specific surface area. Even with increasing appreciation and acceptance, the undiscovered possibilities of aerogels within the textile sphere continue to be predominantly uninvestigated. In this context, we outline the latest advancements in the study of cellulose aerogel formulation and their diverse impacts on textile formations. Drawing from the latest studies, we reviewed the materials used for the creation of various kinds of cellulose-focused aerogels and their properties, analytical techniques, and multiple functionalities in relation to textiles. This comprehensive analysis extensively covers the diverse strategies employed to enhance the multi-functionality of cellulose-based aerogels in the textile industry. Additionally, we focused on the global market size of bio-derivative aerogels, companies in the industry producing goods, and prospects moving forward.

The paper contains the results of the 100-hour test campaign of the Additive Manufactured (AM) spare part (retainer – slipper) dedicated for an exact axial piston pump. The material of the retainer-slipper has been identified by using energy dispersive spectroscopy and replaced by other – with similar material properties as the original one. The obtained spare part had been subjected to only one postprocessing type (sandblasting) to analyze the influence of the rough part after the AM process. The whole test campaign has been divided into stages, where after each stage microscopic measurements have been made. During microscopical investigation roughness and geometrical measurements were conducted. The results revealed that it is possible to replace parts in hydraulic pumps with the use of AM. 100-hour test campaign caused about 500% increase in the surface roughness of the pump’s original part which was cooperated with the AM spare retainer-slipper, without any damages to the test system.

The study was conducted in coniferous and deciduous old growth forests in two forest complexes located in: i) the fenced area of the Popielno Research Station of the Polish Academy of Sciences, with free-living Polish pony [Polish primitive horse (Equus ferus caballus)], and ii) open Maskulińskie Forest District managed (harvested) forest, without horses. The impact of forest animals on ground cover layer as well as on understory shrub layer and undergrowth, in i) area (horses and other forest animals) was compared with the results in ii) area (forest animals without horses). Very significant differences in the understory and undergrowth (above 0,5 m) layer vegetation communities structure between both areas and type of stands were found. The results suggest that the presence of the Polish horse substantially changed the species composition and increased the species diversity of the ground layer and shrub layer both on coniferous forest and in the deciduous forest habitats. The height of the shrub layer trees was lower by 30% in the area with the Polish horse.

Allogeneic hematopoietic stem cell transplantation (allo-HCT) is a potentially curative treatment modality, frequently applied in patients suffering from haematological malignancies. In the last two decades, there have been multiple randomised controlled trials (RCTs), review articles, and meta-analyses addressing the efficacy of rabbit anti-thymocyte globulin (r-ATG) as a graft-versus-host disease (GvHD) prophylaxis. Nevertheless, only a few aimed to compare the effectiveness of different r-ATG formulations. We performed a systematic literature review of articles published since 2017 to this day utilising PubMed, Scopus, Cochrane, and MEDLINE, with the main endpoints being prophylaxis of acute GvHD (aGvHD) and chronic GvHD (cGvHD). We subjected to scrutiny a total of 5 studies, of which 4 compared the differences between Thymoglobulin (ATG-T) and Grafalon (ATG-G), and 1 discussed the impact of ATG-T dose. Overall cGvHD, aGvHD grades II-IV, TRM, OS, NRM, LFS, relapse, overall infections, and EBV reactivation do not seem to be affected by the type of utilised rATG. However, data on aGvHD grades III-IV, GRFS, moderate-severe cGvHD, and CMV reactivation is conflicting. Through our research, we sought to summarise the most recent findings concerning r-ATGs in allo-HCT, and provide insight into the differences between the targets and origin of various ATG formulations.

Volatile fatty acids (VFAs) are a group of common metabolites with a potential of universal infochemicals dedicated to transferring of information between higher organisms and bacteria either from microbiome or external environment. VFAs are common substances among various insect orders, there are numerous studies exploring their influence on the behavior of different insect species. In relation to papers published by J. E. McFarlane, we assess the effects of formic, acetic, propionic, butyric, valeric acids on spatial preference of common stored food grain products, and poultry industry pest – lesser mealworm (Alphitobius diaperinus). We present novel method of continuous, simultaneous assessment of site preference as well as travelled distance in constant-flow olfactometer. All tested VFAs except valeric had a significant repellent effect with formic acid being effective in the lowest concentration. Additionally, VFAs significantly altered distance travelled by insects. Obtained results indicate a potential role of VFAs in the olfactory guided behavior of A. diaperinus, we speculate that reaction to the presence if VFAs may deviate form specificity of species’ original habitat.

Blood flow-restricted training (BFR) is constantly growing in popularity. Despite growing evidence of the significant influence of BFR training on different body functions, its impact on the vascular system, especially the arteries, is controversial. Therefore, the objective of our study was to analyze how BFR exercise, compared to other types of exercise without restriction of blood flow or other active intervention, influences arterial functions and angiogenesis in adults. Studies comparing the effect of BFR versus non-BFR training on arterial parameters are divided into three categories. Endothelial function, angiogenesis, and other vasculature functions. The search was based on three databases (Cochrane Library, PubMed®, Embase). In this systematic review, 38 studies were included. Meta-analysis revealed a more significant improvement in flow-mediated dilatation (FMD) (p=0.002) and the production of the primary angiogenesis biomarker Vascular Endothelial Growth Factor (VEGF) (p=0.009) after training in BFR compared to nonBFR (p=0.002). Analysis of pulse wave velocity, ankle-brachial index, systolic blood pressure, or heart rate did not show a significant difference in changes between BFR and non-BFR training. Other parameters examined were not sufficiently provided to be included in the meta-analysis. The results obtained, present trends suggesting the significant impact of BFR training on endothelial functions and angiogenesis. Unfortunately, there is still a lack of multicenter randomized clinical trials, including many participants, that are necessary to confirm the advantage of BFR over non-BFR activity.

Adenosine is a multifunctional nucleoside with several roles across various levels in organisms. Beyond its intracellular involvement in cellular metabolism, extracellular adenosine potently influences both physiological and pathological processes. In relation to its blood level, adenosine impacts the cardiovascular system, such as heart beating rate and vasodilation. To exploit the adenosine levels in the blood, we employed the liquid chromatography method coupled with mass spectrometry (LC-MS). Immediately after the collection, a blood sample mixed with acetonitrile solution that is either enriched with 13C-labeled adenosine or a newly generated mixture is transferred into the tubes containing the defined amount of 13C-labeled adenosine. The 13C-enriched isotopic adenosine is used as an internal standard, allowing for more accurate quantification of adenosine. This novel protocol for LC-MS-based estimation of adenosine delivers a rapid, highly sensitive, and reproducible means for quantitative estimation of total adenosine in blood. The method also allows quantification of a few catabolites of adenosine, i.e., inosine, hypoxanthine, and xanthine. This advancement provides the analytical tool that has the potential to enhance our understanding of adenosine's systemic impact and pave the way for further investigations into its intricate regulatory mechanisms.

COVID-19 has harmful impact on health. It is especially important for endurance athletes (EAs). Sleep and psychology influence sport performance. Aims of this study were: (1) investigation of the consequences of mild COVID-19 on sleep and psychology and (2) assessment of the conse-quences of the infection on cardiopulmonary exercise test (CPET) results. 49 EAs (males= 43; 87.76%, females= 6; 12.24%, age= 39.9±7.8 years, height= 178.4±6.8 cm, weight= 76.3±10.4 kg; BMI= 24.0±2.6 kg·m−2) underwent maximal cycling or running CPET pre- and post- COVID-19 and completed a survey. Exercise performance was deteriorated after COVID-19 (maximal oxy-gen uptake; VO2max= 47.81±7.81 vs 44.97±7.00 ml·kg·min−1 respectively pre- and post- infection; p<0.001). Waking up at night affected heart rate (HR) at the respiratory compensation point (RCP) (p=0.028). Sleep time influenced pulmonary ventilation (p=0.013), breathing frequency (p=0.010), and blood lactate concentration (Lac) (p=0.013) at RCP. Maximal power/speed (p=0.046) and HR (p=0.070) linked with the quality of sleep. Stress management and relaxation techniques linked with VO2max (p=0.046), maximal power/speed (p=0.033), and maximal Lac (p=0.045). Cardiorespiratory fitness was deteriorated after mild COVID-19 and was correlated with sleep and mental health. Medical Professionals should encourage EAs to maintain proper mental health and sleep after COVID-19 infection to facilitate recovery.

Understanding the molecular factors involved in the development of uterine myomas may result in the use of pharmacological drugs instead of aggressive surgical treatment. ANGPT1, CASR, and PTK2 were examined in myoma and peripheral tissues samples taken from women after myoma surgery and in normal uterine muscle tissue samples in the control group. Tests were performed using tissue microarray immunohistochemistry. No statistically significant differences in ANGPT1 expression between the tissue of the myoma, the periphery, and the normal uterine muscle tissue of the control group were recorded. The CASR value was reduced in the myoma and peripheral tissue and normal in the group of women without myomas. PTK2 expression was also lower in the myoma and periphery com-pared to healthy uterine myometrium. Calcium supplementation could have an effect on stop-ping the growth of myomas.

One of the key pathogenetic links of type 2 diabetes mellitus (T2DM) is the formation of insulin resistance (IR). Besides a wide selection of synthetic antidiabetic drugs, various plant-origin extracts are also available to support the treatment of T2DM. This study aimed to investigate and gain knowledge of the chemical composition and potential IR correction effect of American cranberry (Vaccinium macrocarpon Aiton) leaf extracts and formulate novel 3D-printed oral dosage forms for such extracts. The bioactivity and IR of L-arginine-loaded cranberry leaf extracts were studied in vivo in rats. The cranberry leaf extracts consisted of quinic, 3-caffeoylquinic (chlorogenic), p-coumaroylquinic acids, quercetin 3-O-galactoside, quercetin-3-O-glucoside, quercetin-3-xyloside, quercetin-3-O-arabino-pyranoside, quercetin-3-O-arabinofuranoside, quercetin 3-O-rhamnoside and quercetin-O-p-coumaroyl-hexoside-2 identified by HPLC. In-vivo studies with rats showed that the oral administration of the cranberry leaf extracts had a positive effect on insulin sensitivity coefficients under ITT test, and affected HOMA-IR levels and liver lipid content with experimental IR. A novel 3D-printed immediate-release dosage form was developed for the oral administration of cranberry leaf extracts using polyethylene oxide (PEO) as a carrier gel in a semi-solid extrusion (SSE) 3D printing. In conclusion, American cranberry leaf extracts loaded with L-arginine could find uses in preventing health issues associated with IR.

The paper aims to study the workflow of the detection center of stealthy attacks on industrial installations that generate increase in energy consumption while avoiding triggering fault detection and damaging the installation. Such long-lasting attacks on industrial facilities make production more expensive and less competitive. We present the concept of the remote detection system of cyberattacks directed at maliciously changing the controlled variable in an industrial process air conditioning system. The monitored signals are gathered at the PLC-controlled installation and sent to the remote detection system, where the discrepancies of signals are analyzed based on the Control Performance Assessment indices. The results of performed tests prove the legitimacy of the adopted approach.

Long-term potentiation (LTP) is a molecular basis of memory formation. Here, we demonstrate that LTP critically depends on muscle fructose 1,6-bisphosphatase 2 (Fbp2) – a glyconeogenic enzyme and moonlighting protein protecting mitochondria against stress. We show that LTP induction regulates Fbp2 association with neuronal mitochondria and Camk2, and that the Fbp2-Camk2 interaction correlates with Camk2 autophosphorylation. Silencing of Fbp2 expression or simultaneous inhibition and tetramerization of the enzyme with a synthetic effector mimicking the action of physiological inhibitors (NAD⁺ and AMP) abolishes Camk2 autoactivation and blocks formation of the early phase of LTP and expression of the late phase LTP markers. Astrocyte-derived lactate reduces NAD⁺/NADH ratio in neurons and thus, diminishes the pool of tetrameric and increases the fraction of dimeric Fbp2. We therefore hypothesize that this NAD⁺-level-dependent increase of the Fbp2 dimer/tetramer ratio might be a crucial mechanism in which astrocyte-neuron lactate shuttle stimulates LTP formation.

Focused electron beam induced deposition is a versatile tool for the direct fabrication of complex-shaped nanostructures with unprecedented shape fidelity and resolution. While the technique is well-established for various materials, the direct electron beam writing of silver is still in its infancy. Here, five different silver carboxylates, three fluorinated: [Ag2(µ-O2CCF3)2], [Ag2(µ-O2CC2F5)2], [Ag2(µ-O2CC3F7)2] and two containing hydrogen: [Ag2(µ-O2CCMe2Et)2] and [Ag2(µ-O2CtBu)2] were examined and compared as potential precursors for focused electron beam induced deposition. All of the compounds show high sensitivity to electron dissociation and efficient dissociation of Ag-O bonds. The as-deposited materials showed high silver content from 42 at.% to above 70at.% and silver nano-crystal formation with impurities of carbon and fluorine incorporated between metal grains. A correlation of the number of carbon atoms in the precursor ligands and silver content of the deposited structures was found. The highest silver contents were achieved for compounds with the shortest CF chains. The deposited silver content depends on the balance of electron induced ligand co-deposition and thermal ligand desorption. Low electron flux is advantageous for high silver content. Our findings demonstrate that silver carboxylates constitute a promising group of precursors for focused electron beam nanoprinting of high silver content materials.

(1) Background: The stylohyoid syndrome, known as classical Eagle Syndrome (cES), is characterized by calcificatication of the stylohyoid chain with numerous nonspecific symptoms, mainly pain. This study introduces Minimally Invasive Cervical Styloidectomy (MICS). (2) Methods: MICS was performed on sixty-five patients diagnosed with classical Eagle syndrome. Patients underwent meticulous differential diagnosis. Surgical plans were established based on the findings from neck angioCT. (3) Results: The healing process was uneventful without significant complications. The overall success rate was 97.0%, with a follow-up of a minimum of six months. In one case, the surgery did not yield the desired improvement. In one case, a partial relapse of symptoms was observed. (4) Conclusions: MICS is a straightforward and efficient surgical treatment technique for stylohyoid syndrome.

Tsygankoite, ideally Mn8Tl8Hg2(Sb21Pb2Tl)Σ24S48, is a new sulfosalt discovered at the Vorontsovskoe gold deposit, Northern Urals, Russia. It occurs as lath-like elongated crystals up to 0.2 mm embedded in calcite-dolomite-clinochlore matrix. The associating minerals also include aktashite, alabandite, arsenopyrite, barite, cinnabar, fluorapatite, orpiment, pyrite, realgar, routhierite, sphalerite, tilasite, titanite, etc. The new mineral is non-fluorescent, black, opaque with a metallic lustre and black streak. It is brittle with an uneven fracture and no obvious parting and cleavage. Its Vickers hardness (VHN10) is 144 kg/mm2 (range 131–167) and its calculated density is 5.450 g cm-3. In reflected light tsygankoite is white; between crossed polars it is dark-grey to black. It is strongly anisotropic: rotation tints vary from light-grey to dark-grey to black. Pleochroism and internal reflections are not observed. The chemical composition of tsygankoite (wt.%, electron-microprobe data) is: Mn 6.29, Fe 0.02, Cu 0.02, Ag 0.01, Hg 5.42, Tl 26.05, Pb 5.84, As 3.39, Sb 30.89, S 21.87, Se 0.01, total 99.81. The empirical formula, calculated on the basis of 90 atoms pfu, is: Mn8.06Tl8.00(Hg1.90Fe0.03Cu0.02Ag0.01)Σ1.96(Sb17.85As3.18Pb1.98Tl0.97)Σ23.98(S48.00Se0.01)Σ48.01. Tsygankoite is monoclinic, space group C2/m, a = 21.362(4) Å, b = 3.8579(10) Å, c = 27.135(4) Å, β= 106.944(14)°, V = 2139.19(17) Å3 and Z = 1. The five strongest diffraction peaks from X-ray powder pattern [listed as (d,Å(I)(hkl)] are: 3.587(100)(112), 3.353(70)(-114), 3.204(88)(405), 2.841(72)(-513) and 2.786(99)(-514). The crystal structure of tsygankoite was refined from single-crystal X-ray diffraction data to R = 0.0607 and consists of an alternation of two thick layer-like arrays, one based on PbS-archetype and second – on SnS-archetype. Tsygankoite has been approved by the IMA-CNMNC under the number 2017-088. It is named for Mikhail V. Tsyganko, mineral collector from Northern Urals, who collected the samples where the new mineral was discovered.

Background/Objectives: The aim of the project is a longitudinal assessment of body image and mental health in scoliosis females pre-, postoperatively and in a follow-up, and implementation (one group-CBT scoliosis sample, CBTSS) or not (second group-control scoliosis sample, CSS) of CBT interventions. A healthy female sample (HFS) was also selected for comparative purposes. Methods. 36 in total AIS patients participated in the 1st and 2nd study phases, whereas 23 were eligible in the follow-up. Regarding HFS, 18 participants were included in the study. The CBT intervention took place pre- and postoperatively, during the patients' stay in hospital. Participants completed the Spinal Appearance Questionnaire (SAQ), Body Esteem Scale (BES) and Strengths and Difficulties Questionnaire-25 (SDQ-25). Body image was also assessed using a virtual reality-based application “Avatar Scoliosis 3D”. Results: The difference between the desired and objective, actual body shape is significant preoperatively both in the CBTSS and CSS at p

Paediatric supraventricular tachycardia (SVT) is a common arrhythmia of great clinical significance. If not treated promptly, it can cause heart failure and cardiogenic shock. Depending on the patient’s condition SVT treatment involves vagal manoeuvres, pharmacological or direct current cardioversion. The goal of acute SVT management is to immediately convert SVT to normal sinus rhythm (NSR) and prevent its recurrence. Adenosine is recommended as first-line treatment for stable SVT by the European Resuscitation Council (ERC) and American Heart Association (AHA) guidelines when vagal manoeuvres have proven ineffective. ERC and AHA guidelines recommend the intravenous route of administration. Intraosseous (IO) administration technique is also possible, but still relatively unknown. The aim of this paper is to describe a 3.5-year old child with SVT which was converted to NSR following IO administration of adenosine. Successful conversion was achieved in the second attempt with the adenosine dose. In the described case, there was no recurrence of SVT.

Due to slow progression and susceptibility to radical forms of treatment low-grade PC is associ-ated with high overall survival (OS). With the clinical progression of PC the therapy is getting more complex. The immunosuppressive tumor microenvironment (TME) makes PC a difficult target for most immunotherapeutics. Its general immune resistance is established by i.e. immune evasion through Treg cells, synthesis of immunosuppressive mediators, and defective expression of surface neoantigens. The success of sipuleucel-T in clinical trials initiated several other clinical studies that specifically target the immune escape of the tumor and eliminate the immunosuppres-sive properties of TME. In the settings of PC treatment, this can be commonly achieved with radi-ation therapy (RT). Also, focal therapies usually applied for localized PC, such as high-intensity focused ultrasound (HIFU) therapy, cryotherapy, photodynamic therapy (PDT), or irreversible electroporation (IRE) were shown to boost anti-cancer response. Nevertheless, the present guide-lines restrict their application to localized and low-grade PC. This review explains how RT and focal therapies enhance the immune response. We also provide data supporting the combination of RT and focal treatments with immune therapies.

The silver fir (Abies alba Mill.) is among the most valuable conifers in Europe for ecological and economic reasons. In the course of history, primarily in the 20th century, its share in stands has been declining due to ill-suited management practices, especially clear-cut management, air pollution, and wildlife-induced damage. Based on recent knowledge of fir ecology and population dynamics, small-scale shelterwood and selection management have been introduced in fir stands, which have also stabilized them. Fir is an essential species for maintaining high stability and biodiversity, especially on planosols and in waterlogged habitats. Due to its shade tolerance and environmental flexibility, particularly at higher altitudes, it can coexist very well with many tree species in mixtures, which can increase the productive potential of stands. It can form stands of heterogeneous structure, ranging from single to multi-layer to selection. For its successful natural regeneration, it is essential to reduce cloven-hoofed game and thus prevent bud browsing damage. On the other hand, fir is a species relatively resistant to bark stripping and the spread of secondary rot compared to Norway spruce (Picea abies [L.] Karst.). During global climate change, fir is expected to shift to higher elevations with sufficient precipitation, while in the southern part of its natural range or at lower elevations, outside water-influenced habitats, it is likely to decline. This paper essentially reviews the description and distribution of the species, its ecological requirements, threats and diseases, habitat and stand conditions, and close-to-nature forest management practices with emphasis on ongoing climate change.

UV-digital printing belongs to the commonly used method for custom large-area substrate decoration. Despite low surface energy and adhesion, transparent polymer materials, such as polymethylmethacrylate (PMMA) and polycarbonate (PC), represent an ideal substrate for such purposes. The diffuse coplanar surface barrier discharge (DCSBD) in a novel compact configuration was used for substrate activation to improve ink adhesion to the polymer surface. This industrially applicable version of DCSBD was prepared, tested, and successfully implemented for the UV-digital printing process. Furthermore, wettability and surface free energy measurement, X-ray photoelectron spectroscopy, atomic force and scanning electron microscopy evaluated the surface chemistry and morphology changes. The changes in adhesion of the surface and of ink were analyzed by a peel-force and a crosscut test, respectively. A short plasma treatment (1-5 s) enhanced the substrate's properties of PMMA and PC while providing the pre-treatment suitable for further in-line UV-digital printing. Furthermore, we did not observe damage or significant change of roughness affecting the substrate's initial transparency.

Biofuels have become an integral part of everyday life in modern society. Bioethanol and fatty acid methyl esters are a common part of both the production of gasoline and diesel fuels. Also, pressure on replacing fossil fuels with bio-components is constantly growing. Waste vegetable fats can be replacing biodiesel. HVO seems to be a better alternative. This fuel has a higher oxidation stability for storage purposes, a lower temperature of loss of filterability for the winter time, a lower boiling point for cold starts and other. Viscosity, density, cold filter plugging point of fuel blend, and flash point were measured to confirm that a fuel from HVO is so close to a fuel standard that it is possible to use it in engines without modification. The objective of this article is to show the properties of different fuels with and without HVO admixtures and to prove the suitability of using HVO compared to FAME. HVO can also be prepared from waste materials and no major modifications of existing refinery facilities are required. No technology in either investment or engine adaptation of fuel oils is needed in fuel processing.

Onchocerciasis treatment and control relies mainly on the use of ivermectin which has high activity against the microfilarial stage of Onchocerca volvulus but limited activity against the long lived, tissue dwelling adult nematodes. As this neglected tropical disease has now been targeted for elimination there is an urgent need for new drugs to combat these parasites, ideally with macrofilaricidal activity. In this study we have examined the anti-Onchocerca activity of a range of existing FDA approved drugs with a view to repurposing, which can lead to rapid and relatively inexpensive development. From the Pharmakon-1600 library, 106 drugs were selected and tested against O. gutturosa adult male parasites using a concentration of 1.25 x 10-5 M in an in vitro 5-day standard assay to assess motility and viability (using MTT/formazan colorimetry). The findings revealed that 44 drugs produced marginal/moderate activity (50-99% motility and/or MTT reductions) including cefuroxime sodium, methenamine, primaquine phosphate, rivastigmine tartrate, while 23 drugs produced good activity (100% motility reductions and significant MTT reductions), including atovaquone, isradipine, losartan, rifaximin, cefaclor and pyrantel pamoate. Although this study represents only a first step, some of the identified hits indicate there are potential anti-Onchocerca drug candidates worthy of further investigation.

Background: Endoplasmic reticulum (ER) stress is a significant player in the pathophysiology of various neurodegenerative and neuropsychiatric disorders. Despite the established link between ER stress and inflammatory pathways, there remains a need for deeper exploration of the specific cellular mechanisms underlying ER stress-mediated neuroinflammation. Methods: This study aimed to investigate how severity of ER stress can impact the release of proinflammatory cyto-kines IL-6 and IL-8 from astrocytes and microglia, comparing the effects with those induced by well-known immunostimulants - tumor necrosis factor alpha (TNF-α) or lipopolysaccharide (LPS). Results: Mild ER stress has a distinct effect on the cytokine release compared to more intense stress levels, i.e. diminished IL-6 production was accompanied by an increase in IL-8 level, which was significantly more pronounced in astrocytes than in microglia. On the contrary, prolonged or more severe ER stress induced inflammation in glial cells, leading to a time- and concentration-dependent buildup of pro-inflammatory IL-6 but unlike inflammatory agents, ER stress inducer diminished IL-8 secretions by glial cells. Conclusion: The differences could hold importance in identifying ER stress markers as potential drug targets for treatment of neurodegenerative diseases or mood disorders, yet it requires confirmation in more complex animal studies.

3D/4D printing technologies are currently among the fastest growing, cutting edge fabrication technologies. The scale of their applications is vast and applicable to nearly all industries. 3D printing technologies are particularly popular in robotics, and especially in advanced design innovative solutions for areas such as manufacturing, space technology and medicine. The development of robotics, and in particular of the precision of manufactured components, such as actuators, pneumatic muscles, power transmission units, etc., means that new prototypes are still being made, where the use of 3D printers reduces the production time severalfold and allows for completing the necessary simulations and tests. In addition, the use of 3D printers allows for the production of thin-walled and cellular structures, which is a great advantage compared to conventional fabrication technologies. In the range of 3D printers available on the market, only a few selected technologies allow for actual use in the construction of advanced robot elements (muscles, vibration dampers, etc.). In the era of rapid growth of the precision of the available 3D printers and modern materials, 3D printing may soon become a major tool in robotics. This article presents an overview of 3D printing technologies and materials in terms of their application in robotics and provides examples of the use of 3D and 4D printing in prototyping and fabrication of robotic elements with particular emphasis on the current state of the art. The study considered the possibilities of using 3D/4D printing in robotics with the use of polymeric materials. The review of the literature and the research work currently being carried out in this area is very promising and it seems that 3D/4D printing in robotics is widely used and is still developing, which allows to conclude that in the near future the number of research works in this field will increase rapidly.

Background: Studying anxiety, stress and the selection of coping strategies in the COVID-19 pandemic is necessary to minimize the adverse changes associated with the risk of infection and the consequences of the disease. Objective: To investigate the level of anxiety, stress perception and coping strategies in relation to the presence of illness. Material and Methods: The anonymous cross-sectional online survey was conducted among 3950 university students of northeastern Poland (1822), Lithuania (232) and the Russian exclave of Kaliningrad (1896). Due to the almost identically applied anti-epidemic measures, the respondents were treated as a unified group. The State-Trait Anxiety Inventory, Perceived Stress Scale-10 and Coping Orientations to Problems Experienced questionnaires were used. Results: Among 1212 men and 2738 women, COVID-19 was diagnosed in 348 (28.7%) and 1020 (37.3%) individuals, respectively, according to the clinical protocol. The prolonged nature of the process and the longer consequences of the disease were indicated by an increase in anxiety levels. Conclusions: The risk of possible infection and coping with illness required the adoption of active anti-stress strategies, which was observed regardless of going through the disease. Convalescents differed from non-diseased individuals in having higher levels of concern about their own emotions and their more frequent turn to religion, notably among the females. The repertoire of strategies among women was broader, with elevated levels of helplessness and avoidance seen as integral strategies.

Critical distance concerns precise digital levelling, which has inaccurate results at a certain sighting distance. The influence of critical distance on a measured height difference has been confirmed by calibrating certain digital levels and their appropriate code devices on a vertical comparator under laboratory conditions. The paper describes the research based on experimental measurements done to find the influence of critical distance on height differences obtained by precise digital levels of Leica NA3003 and DNA03. The processing of the measurement results consisted of de-fining a random error on a station by using parameter estimation of an error model to specify a partial error on a station dependent on sighting distance and then the processing phase continues with the finding the relation between sighting distance and dispersion of height differences ac-quired by digital levelling under terrain conditions. The theoretical part involves the development of levelling accuracy theories that vary over time by view on random and systematic error propagation. The numerical and graphical solution of the experimental measurements involves ordering the height differences into sighting groups according to the sighting distances and the computed standard deviations, which represent a measure of height differences dispersion. The suspicious sighting groups are highlighted in the table and compared with theoretical data pro-vided by authors of calibrating the same digital levels

The purpose of this review is to summarize current knowledge on lymph node dissection (LND) in prostate cancer (PCa) patients undergoing radical prostatectomy (RP). Despite a growing body of evidence, utility, therapeutic and prognostic value of such approach as well as optimal extent of LND, remain unsolved issues. Although LND is the most accurate staging procedure, the direct therapeutic effect is still not evident from the current literature which limits the possibility of establishing clear recommendations. This indicates the need for further robust and adequately designed high quality clinical trials.

Coronary artery disease (CAD) and hypertension significantly contribute to cardiovascular morbidity and mortality. MicroRNAs (miRNAs) have recently emerged as promising biomarkers and therapeutic targets for these conditions. This systematic review conducts a thorough analysis of the literature, with a specific focus on investigating miRNA expression patterns in patients with CAD and hypertension. The review encompasses an unspecified number of eligible studies that employed a variety of patient demographics and research methodologies, resulting in diverse miRNA expression profiles. This review highlights the complex involvement of miRNAs in CAD and hypertension and the potential for advances in diagnostic and therapeutic strategies. Future research endeavours are imperative to validate these findings and elucidate the precise roles of miRNAs in disease progression, offering promising avenues for innovative diagnostic tools and targeted interventions.

Background: Blood pressure (BP) is characterized by a circadian rhythm (Circr), with lower nighttime values, called dipping. Non-dipping is associated with higher CVD risk. The Circr of urinary sodium excretion (NaCle), peaking during the day, is linked to BP patterns. Physical ac-tivity (PA) is known to improve BP control and enhance the dipping phenomenon, but its possi-ble effect on NaCle remains unclarified. Objectives: This study aimed to investigate the correla-tion between PA and the Circr of NaCle and to determine if the relationship is independent of age, sex, BP values, dipping pattern, and salt intake. Methods: A cross-sectional analysis was conducted using data from the Ticino Epidemiological Stiffness Study, involving 953 participants in Switzerland. Data collection included standardized questionnaires, blood samples, 24-hour urine collections, and ambulatory BP monitoring. Participants were categorized into sedentary, partially active, and active. The effect of PA, NaCl intake, and dipping on the day/night NaCle ratio, was assessed with multivariable linear regressions. Results: Participants median age 49 years, with 78% having normal BP values and 47% exhibiting a dipping pattern. 51% were classi-fied as sedentary and 22% as partially active. The median NaCl intake was 7.9 g/day. The youngest subjects had a higher hourly NaCle ratio compared to older subjects. Higher NaCl in-take correlated with increased BP, phenomenon more pronounced in men and younger subjects. The hourly day/night NaCle ratio positively correlates with dipping; however, PA did not show a significant correlation with the NaCle ratio. Conclusion: This study indicates that while the day/night NaCle ratio correlates with the dipping pattern, PA is unrelated to the circadian rhythm of renal sodium handling. The beneficial effects of PA on BP and cardiovascular health thus appear to be mediated through mechanisms other than NaCle. These are explorative find-ings only, but relativize the need for further investigations on the topic.

Liver transplantation is currently the only curative therapy for patients with liver cirrhosis. Not all patients in the natural course of the disease will undergo transplantation, but the majority of them will experience portal hypertension and its complications. In addition to medical and endoscopic therapy, a key role in managing these complications is played by the placement of a transjugular intrahepatic portosystemic shunt (TIPS). Some indications for TIPS placement are well-established and they are expanding and broadening over time. This review aims to describe the role of TIPS in managing patients with liver cirrhosis, considering them as potential candidates for liver transplantation. As far as is known TIPS placement seems not to affect the surgical aspects of liver transplantation, in terms of intra operative bleeding rates, postoperative complications or length of stay in the Intensive Care Unit. However, the placement of a TIPS “towards transplant" can offer advantages in terms of enhancing the patient's clinical condition at the time of transplantation and improving patient survival. Additionally, the TIPS procedure can help preserve the technical feasibility of the transplant itself. In this context, indications for TIPS placement may be expanded and considered at an earlier stage. TIPS insertion can also lead to serious adverse events and there are no evidence-based recommendations on this topic to date. For these reasons further studies are needed to make reliable recommendations for TIPS in the pre-transplant setting.

The fusion of penetrating peptides (PPs), e.g., cell penetration peptides (CPPs), or antimicrobial peptides (AMPs) together with antimicrobial agents is an expanding research field. Specific AMPs, such as lactoferricin B (LfcinB), have demonstrated strong antibacterial, antifungal, and antiparasitic activity, as well as valuable anticancer activity, proving beneficial in the development of anticancer conjugates. The resulting conjugates offer potential dual functionality, acting as both an anticancer and an antimicrobial agent. This is especially necessary in cancer treatment where microbial infections pose a critical risk. Leukemic cells frequently exhibit altered outer lipid membranes compared to healthy cells, making them more sensitive to compounds that interfere with their membrane. In this communication, we revisited and reanalyzed our earlier research on LfcinB and its conjugates. Furthermore, we carried out new experiments with a specific focus on cell proliferation, changes in membrane asymmetric phosphatidylserine location, intracellular reactive oxygen species (ROS) generation, mitochondrial functions, and in vitro bacterial topoisomerase inhibition.

To our best knowledge this is the first study to assess and compare lower limb biomechanics and gait pattern between patients undergoing total knee arthroplasty with use of fixed-bearing medial-pivot and multi-radius design implants. Results of this study show that there were no statistical differences between both types of implants and even though there was significant improvement in patient-reported outcome and gait pattern, those parameters still differ significantly in comparison to healthy volunteers. The problem with dissatisfaction after operative treatment may not lay in the procedure itself, but many different factors may contribute to it. Next studies comparing other designs of implants, as well as proper rehabilitation protocol should be performed

Lymph node invasion in prostate cancer is a significant prognostic factor indicating worse prognosis. While it affects significantly both survival rates and recurrence, proper management remains a heated issue. Thorough evaluation of risk factors associated with nodal involvement, such as lymph node density or extracapsular extension, is crucial to establish potential expansion of the disease and to substratify patients clinically. There are multiple strategies that may be taken into consideration for patients with positive lymph nodes. Nowadays therapeutic methods are generally based on observation, radiotherapy, and androgen deprivation therapy. However current guidelines are incoherent in terms of indication of the most effective management approach. Future management strategies will be expected to reach for novel diagnostic tools and therapies, such as photodynamic therapy or diagnostic imaging with prostate specific membrane antigen. Nevertheless, this heterogeneous group of men remains a vast therapeutic concern, and both clarification of the guidelines and optimal substratification of patients is required.

Astrocytes are considered to possess a noticeable role in brain metabolism and as a partners in neuron-glia cooperation contribute to synthesis, bioconversions and regulation of the flux of substrates for neuronal metabolism. With the aim to investigate to which extend are human astrocytes metabolizing amino acids and by which compounds are they enriching their surrounding we employed the metabolomics analysis of their culture media by 1H-NMR. In addition, we compered the composition of media with either 5 mM or 25 mM glucose. The quantitative analysis of culture media by 1H-NMR revealed that astrocytes readely dispose from their milieu glutamine, branched-chain amino acids, and pyruvate with significantly high rate, while they enrich the culture media with lactate, branched-chain keto acids, citrate, acetate, ketone bodies, and alanine. The hyperglycemia suppressed the capacity of astrocytes to release branched-chain amino acids while stimulating the generation of ketone bodies. Our results highlight the active involvement of astrocytes in metabolism of several amino acids, and the regulation of key metabolic intermediates. The observed metabolic activities of astrocytes provide valuable insights into their roles in supporting neuronal function, brain metabolism, and intercellular metabolic interactions within the brain. Understanding the complex metabolic interactions between astrocytes and neurons is essential for elucidating brain homeostasis and the pathophysiology of neurological disorders.

Apple red flesh coloration is a result of the performance of biochemical pathway involved in the biosynthesis of anthocyanins and anthocyanidins. Based on apple genome analysis, high number of regulatory genes, mainly transcription factors such as MYB, which are components of regulatory complex MYB-bHLH-WD40, and several structural genes (PAL, 4CL, CHS, CHI, F3H, DFR, ANS, UFGT) involved in anthocyanin biosynthesis have been identified so far. In this study, we investigated previously unrecognized genes involved in the constitution of red-flesh apple phenotype. These genes could be concerned as molecular markers for early selection of new apple cultivars. Based on comparative transcriptome analysis of apples with different fruit flesh coloration, we successfully identified and characterized ten genes from plant hormone transduction pathway of: auxin (GH3); cytokinins (B-ARR); gibberellins (DELLA); abscisic acid (SnRK2 and ABF); brassinosteroids (BRI1, BZR1 and TCH4); jasmonic acid (MYC2); and salicylic acid (NPR1). In presented studies an analysis of their expression profiles was performed in immature and ripe fruits of red-fleshed cultivars. Generally, we have uncovered, the set of the novel genes, mediating regulation of the abscisic acid, salicylic acid, cytokinins and jasmonic acid signaling and preliminarily described their role in anthocyanin biosynthesis, accumulation and degradation. Their expression was not characterized in apple fruits so far. Presented study, allowed to underline the relationship of genes from hormone signal transduction pathway with UFGT gene, directly responsible for anthocyanin color transformation as well as confirmed their crucial role of plant hormone regulation and anthocyanin accumulation during apple fruit ripening.

The purpose of this review is to present the current knowledge about the diagnostic and treatment options in bladder cancer (BCa) patients with clinically positive lymph nodes (cN+). In this review compaction of CT and MRI performance in preoperative prediction of lymph node invasion (LNI) in BCa patients was presented, along with other diagnostic methods. Most scientific societies do not distinguish cN+ patients in their guidelines, recommendations concern muscle-invasive bladder cancer (MIBC) and differ between associations. Currently, the standard treatment of patients with MIBC is radical cystectomy (RC) with bilateral pelvic lymph node dis-section (PLND). The template of PLND and its therapeutic value remain debatable. Moreover, most guidelines recommend neoadjuvant chemotherapy (NAC). However, there is still lack of definitive evidence of the superiority of neoadjuvant chemotherapy over adjuvant chemotherapy. Nevertheless, the curative treatment that provides the best long-term survival in cN+ patients is a multimodal approach with a combination of chemotherapy and RC. Recent studies demonstrate the growing importance of immunotherapy. Special attention should be paid to cN+ BCa patients as the oncological outcomes are significantly worse for this group.

Physical Unclonable Functions (PUFs) based on the retention times of the cells of a Dynamic Random Access Memory (DRAM) can be utilised for the implementation of cost-efficient and lightweight cryptographic protocols. However, as recent work has demonstrated, the times needed in order to generate their responses may prohibit their widespread usage. In order to address this issue, the Row Hammer PUF has been proposed by Schaller et al. [1], which leverages the row hammer effect in DRAM modules to reduce the retention times of their cells and, therefore, significantly speed up the generation times for the responses of PUFs based on these retention times. In this work, we extend the work of Schaller et al. by presenting a run-time accessible implementation of this PUF and further reducing the time required for the generation of its responses. Additionally, we also provide a more thorough investigation of the effects of temperature variations on the the Row Hammer PUF and briefly discuss potential statistical relationships between the cells used to implement it. As our results prove, the Row Hammer PUF could potentially provide an adequate level of security for Commercial Off-The-Shelf (COTS) devices, if its dependency on temperature is mitigated, and, may therefore, be commercially adopted in the near future.

Acute pancreatitis (AP) is the most common gastrointestinal disease leading to hospitalizations. The development of AP leads to damage of the pancreatic microcirculation with a cascade of subsequent events resulting, among others, in coagulopathy. Previous research showed that anticoagulants can be an important therapeutic agent. Heparin and acenocoumarol can alleviate the course of AP, as well as accelerate healing and post-inflammatory regeneration of the pancreas. The aim of this study was to check whether warfarin, a drug with more stable effects than acenocoumarol, affects the healing and regeneration of the pancreas in the cerulein-induced AP. AP was evoked in Wistar male rats by intraperitoneal administration of cerulein. The first dose of warfarin (45, 90 or 180 µg/kg/dose) was administered 24 hours after the first dose of cerulein and the doses of warfarin were repeated once a day in subsequent 10 days. The severity of acute pancreatitis was assessed immediately after the last dose of cerulein, as well as 1, 2, 3, 5, and 10 days after AP induction. Treatment with warfarin dose-dependently increased interna-tional normalized ratio (INR) and attenuated the severity of pancreatitis in histological ex-amination and accelerated pancreatic recovery. Those effects were accompanied with a faster reduction in the pancreatitis-evoked increase in serum activity of amylase and lipase, serum concentration of pro-inflammatory interleukin-1β, and plasma level of D-Dimer. In addition, treatment with warfarin decreased pancreatic weight and improved pancreatic blood flow in rats with AP. The therapeutic effect was particularly pronounced after the administration of warfarin at a dose of 90 µg/kg/dose. Conclusion: Administration of warfarin accelerates re-generation of the pancreas and recovery in the course of cerulein-induced mild-edematous acute pancreatitis.

TWIST1 is a transcription factor that affects cell behavior during development and cell differentiation. Yet, it is better known for its roles in neoplasia through regulation of cell plasticity. The pathological contributions of TWIST1 in tumor initiation, angiogenesis, invasion, metastasis, and chemo-resistance have been the focus of much research. To-date, the only way to quantitatively measure the abundance of TWIST is by immunoblots. Yet, no bioassay exists that can detect TWIST1 activity. Thus, we present here a TWIST1 cell-based assay that allows measuring the amount of active TWIST1 non-invasively in living cells. The bioassay was characterized against previously described TWIST1 “inhibitors”, as well as by epigenetic modulators of TWIST1 gene expression. Moreover, we tested multiple cell lines, showing that the level of TWIST1 mRNA resembles that of the bioassay. We show that prostate cancer cells (PC3) undergoing EMT, migrate out of 3D-spheroids and have increased TWIST1 activity. This fast and reliable system to detect active TWIST1 in different biological conditions allows a detailed analysis of this factor, as well as it can be used for drug discovery, since TWIST1 is a potential target for cancer chemotherapeutics.

Multiple myeloma (MM) accounts for about 10 to 15% of all diagnosed hematologic malignancies and about 1-2% of all cancer cases. Approximately 80-90% of MM patients develop bone disease and the changes rarely regress. It is only possible to stop or slow their progression. A major role in bone destruction in MM is attributed to the Wnt signaling pathway, and its action can be modified by various types of interventions including training and diet. Therefore, the aim of this project was to evaluate the effects of a Nordic Walking (NW) training cycle and intermittent fasting (IF) on the levels of selected bone turnover markers associated with the Wnt pathway in patients with MM. Results from 35 patients divided into training (NW and IF NW) and non-training (IF and control) groups were included in the analysis. A 6-week training cycle involving 60-minute workouts 3 times a week was conducted. Body mass and composition and the levels of: vitamin D, calcium and phosphorus, beta2-microglobulin and albumin were examined before and after completion of training cycle. Markers of bone turnover were also determined: sclerostin (SOST), Dickkopf-related protein 1 (DKK-1), osteoprotegrin (OPG), osteopontin (OPN) and Tartrate-resistant acid phos-phatase 5b (TRACP 5b). There was no negative effect of IF or combined training and fasting on the nutritional status of the patients (the level of albumines was unchanged). Both training groups showed an increase in serum concentrations of the active metabolite of vitamin D (IF NW and NW: p=0.001 and p=0.022, re-spectively). The change in the concentration of this vitamin negatively correlated with the con-centration of TRACP 5b (r=-0.413, p=0.014). Evaluating the concentrations of markers related to bone turnover, a reduction in the concentrations of SOST (time: p=0.026, time vs. group: p=0.033) and TRACP 5b (time: p

Collisions of low energy electrons with molecules are important for understanding many aspects of the environment and technologies. Understanding the processes that occur in these types of collisions can give insights into plasma etching processes, edge effects in fusion plasmas, radiation damage to biological tissues and more. A radical update of the previous expert system for computing observables relevant to these processes, Quantemol-N, is presented. The new Quantemol Electron Collision (QEC) expert system simplifyies the user experience, improving reliability and implements new features. The QEC GUI interfaces the Molpro quantum chemistry package for molecular target setups and to the sophisticated UKRmol+ codes to generate accurate and reliable cross-sections. These include elastic cross-sections, super elastic cross-sections between excited states, electron impact dissociation, scattering reaction rates, dissociative electron attachment, differential cross-sections, momentum transfer cross-sections, ionization cross sections and high energy electron scattering cross-sections. With this new interface we will be implementing dissociative recombination estimations, vibrational excitations for neutrals and ions, and effective core potentials in the near future.

Production of biofuel from lignocellulosic biomass is relatively low due to the limited knowledge about natural cell wall loosening and cellulolytic processes in plants. Industrial separation of cellulose fiber mass from lignin, its saccharification and alcoholic fermentation is still cost-ineffective and environmental unfriendly. Assuming that the green transformation is inevitable and that the new sources of raw materials for biofuels are needed, we decided to study cell death - a natural process occurring in plants in a context of reducing the recalcitrance of lignocellulose for production of second generation bioethanol. “members of the enzyme families responsible for lysigenous aerenchyma formation were identified during the root hypoxia stress in Arabidopsis thaliana cell death mutants. The cell death regulatory genes, LESION SIMULATING DISEASE 1 (LSD1), PHYTOALEXIN DEFICIENT 4 (PAD4) and ENHANCED DISEASE SUSCEPTIBILITY 1 (EDS1) conditionally regulate the cell wall when suppressed in transgenic aspen. During four years of growth in the field the following effects were observed: lignin content was reduced, the cellulose fiber polymerization degree increased and the growth itself was unaffected. The wood of transgenic trees was more efficient as a substrate for saccharification, alcoholic fermentation and bioethanol production. The presented results may trigger the development of novel biotechnologies in the biofuel industry.

Background: Perioperative treatment is a gold standard in locally advanced gastric cancer or GEJ cancer in western population. Unfortunately, the response rate after neoadjuvant chemotherapy (NAC) remains limited. Moreover, there are currently no biomarkers enabling an individual prediction of therapeutic efficacy. The aim of this study was identification of serum biomarkers of early response to NAC. Methods: We conducted this prospective study in the MSCNRIO, in Warsaw, Poland. A total of 71 patients and 15 healthy volunteers signed informed consent. Complete blood count, blood chemical tests, carcinoembryonic antigen (CEA) carcinoma antigen 125 (CA125), carcinoma an-tigen 19.9 (CA19.9), d-dimer, fibrinogen (F) were measured at baseline and before every cycle. Circulating tumour cells (CTCs) and interleukin-1β (IL-1β), interleukin-6 (IL-6), interleukin-8 (IL-8), interleukin-10 (IL-10) were measured in a pilot group of 40 patients at baseline and before cycle two (C2) and cycle three (C3). Results: Of all the measured parameters, only IL-6 serum level was statistically significant. The IL-6 level before C2 of chemotherapy was significantly decreased in complete pathological re-sponse (pCR) vs non-pCR group (3.71 pg/mL vs 7.63 pg/mL, p=0,004). In all patients with IL-6 levels below 5.0 pg/mL in C2, tumour regression TRG1a/1b according to Becker classification and ypN0 were detected in postoperative histopathological specimens. The IL-6 level before C1 of chemotherapy was significantly elevated in ypN+ vs ypN0 (7.69 pg/mL vs 2.89 pg/mL, p=0.022). Conclusions: The trial showed that elevated level of IL-6 prior to treatment and C2 might be a predictor of pathologic response to NAC.

Glioblastoma is a highly malignant brain tumor consisting of heterogeneous cellular population. The transformed metabolism of glioblastoma cells supports their growth and division on the background of their milieu. One might hypothesize that the transformed metabolism of a primary glioblastoma could be well adapted to limitations in the variety and number of substrates imported into the brain parenchyma and present it their microenvironment. Additionally, the phenotypic heterogeneity of cancer cells could promote the variations among their metabolic capabilities regarding the utilization of available substrates and release of metabolic intermediates. With the aim to identify the putative metabolic footprint of different types of glioblastoma cells, we exploited the possibility for separation of polar and ionic molecules present in culture media or cell lysates by hydrophilic interaction liquid chromatography (HILIC). The mass spectrometry (MS) was then used to identify and quantify the eluted compounds. The introduced method allows the detection and quantification of more than 150 polar and ionic metabolites in single run, those may be present either in culture media or cell lysates and provide data for polaromic studies within metabolomics. The method was applied to analyze the culture media and cell lysates derived from two types of glioblastoma cells, T98G and U118. The analysis revealed that even the both types of glioblastoma cells share several common metabolic aspects, they also exhibit differences in their metabolic capability. This finding agrees with the hypothesis about metabolic heterogeneity of glioblastoma cells. Furthermore, the combination of both analytical methods, HILIC-MS, provides a valuable tool for metabolomic studies based on the simultaneous identification and quantification of a wide range of polar and ionic metabolites - polaromics.

Delivery systems of the biologically active substance such as proanthocyanidins (PCAN) produced through the electrospinning method were designed using a blend of poly(L-lactide-co-glycolide) and poly[(R,S)-3-hydroxybutyrate]. The research involved the structural and thermal characteristics of the developed electrospun three-dimensional fiber matrix, as well as hydrolytic degradation tests performed on them. Additionally, the release profile of PCAN from the electrospun nonwoven was determined using UV–VIS spectroscopy. Approximately 30% of PCAN was released from the tested electrospun nonwoven during the initial 15-20 days of incubation. The chemical structure of water-soluble oligomers that were formed after the hydrolytic degradation of the developed delivery system was identified through electrospray ionization mass spectrometry. Oligomers of lactic acid and OLAGA oligocopolyester, as well as oligo-3-hydroxybutyrate terminated with hydroxyl and carboxyl end groups, were recognized as degradation products released into the water during the incubation time. It was also demonstrated that variations in the degradation rate of individual mat components influenced the degradation pattern, and the number of formed oligomers. The obtained results suggest that the incorporation of proanthocyanidins into the system slowed down the hydrolytic degradation process of the poly(L-lactide-co-glycolide)/poly[(R,S)-3-hydroxybutyrate] three-dimensional fiber matrix. In addition, in vitro cytotoxicity and antimicrobial studies advocate the use of PCAN for biomedical applications with promising antimicrobial activity.

Milk serves as a crucial source of natural bioactive compounds essential for human nutrition and health. The gastrointestinal digestion of milk proteins releases various biologically active peptides that positively impact human health and enhance physiological performance. With the growing production of cheese, Greek yogurt, and other dairy products, the volume of unutilized acid whey is significantly increasing. Acid whey, containing almost all whey proteins and approximately one-quarter of casein, presents a valuable raw material for generating peptides with potential health benefits. These peptides exhibit properties such as antioxidant, antimicrobial, anti-inflammatory, anticarcinogenic, antihypertensive, antithrombotic, opioid, mineral-binding, and growth-stimulating activities, contributing to improved human immunity and the treatment of chronic diseases. Enzymatic hydrolysis of milk proteins has been developed as a method to produce these peptides, facilitating their use in food fortification. To incorporate whey into functional beverages, it undergoes fermentation by lactic acid bacteria with proteolytic activity. To specifically enrich these beverages with peptides exhibiting targeted bioactivities, it is essential to select lactic acid bacteria strains possessing the requisite protease profiles. Additionally, the sensory properties of the final product can be enhanced using starter cultures with diverse metabolic capabilities, even in the absence of added flavoring agents. Given the imperative to develop waste-free technologies and enhance the profitability of the dairy industry, there is a growing need to efficiently utilize and transform acid whey into a broad spectrum of valuable products and food additives. This approach is justified not only by the nutritional benefits of the bioactive components in whey but also by the commercial potential of safe and health-enhancing products.

The paper focuses on the application of a multilevel, integrative and territorial approach to the protection of cultural heritage through planning instruments in Serbia. It points out the problems of the sectoral approach and discusses international recommendations that can be integrated into the planning methodology. The case study is the area of Djerdap National Park, which has an already established international and national importance. The research suggests that the cultural heritage in the area, with the exception of the Roman limes, is still recognized at the level of individual localities. The study emphasizes the importance of aligning all levels of governance to safeguard the whole spatial entity rather than focusing solely on its particular areas. The interna-tional and national importance of the planning area contributes to the strengthening of awareness of heritage and its institutional protection. However, the vitality of the area, which is key to its sustainable development, comes from the local level. Planning documents contribute to the inte-gration of local values and local communities into development programs and projects.

In order to shorten the detection time and improve the average precision on embedded devices, A lightweight and high accuracy model is proposed for passion fruit in complex environments (backlight, occlusion, overlap, sunny, cloudy, rainy). Firstly, replacing the backbone network of YOLOv5 with a lightweight GhostNet model reduces the number of parameters and computation while improving detection speed. Secondly, a new feature branch is added to the GhostNet network, and the feature fusion layer in the neck network is reconstructed to effectively combine the lower-level and higher-level features, which not only improves the accuracy of the model but also maintains its lightweight. Finally, the knowledge distillation methods are used to transfer the knowledge from the more capable teacher model to the less capable student model, which significantly improving the detection accuracy. The improved model is denoted as G-YOLO-NK. The average accuracy of the G-YOLO-NK network is 96.00%, which is 1.00% higher than the original YOLOv5s model. Furthermore, the improved model size is 7.14MB, reduced to half of the original model, and the real-time detection frame rate is 11.25 FPS on the Jetson Nano. Compared to the state-of-the-art model, the proposed model outperforms them in terms of average precision and detection performance. The present work provides an effective model for real-time detection of passion fruits in complex orchard scenes, which can provide valuable technical support for the development of orchard picking robots and greatly improve the intelligence level of orchards.

The Simultaneous Localization And Mapping (SLAM) scanner is an easy and portable Light Detection And Ranging (LiDAR) data acquisition device. Its main output is a 3D point cloud covering the scanned scene. Regarding the importance of accuracy in the survey domain, this paper aims to assess the accuracy of two SLAM scanners: the NavVis VLX and the BLK2GO Scanner. This assessment is conducted for both outdoor and indoor environments. In this context, two types of reference data are used: the Total Station (TS) and the static scanner Z+F Imager 5016. To carry out the assessment, four comparisons are tested: cloud to cloud, cloud to mesh, mesh to mesh, and edge detection board assessment. However, the results of the assessments confirm that the accuracy of indoor SLAM scanner measurements (5 mm) is greater than that of outdoor ones (between 10 mm and 60 mm). Moreover, the comparison of cloud to cloud provides the best accuracy regarding direct accuracy measurement without manipulations. Finally, based on the high accuracy, scanning speed, flexibility, and the accuracy differences between tested cases, it is confirmed that SLAM scanners are effective tools for data acquisition.

The impact of interaction SS with MJO on rainfall along Java Island to East Nusa Tenggara has been studied using daily rainfall observation data from 2140 weather observation stations, which are also equipped with GSMaP, OLR, and ERA5 data. There were 61 SS events found, 17 during active MJO and 44 in inactive MJO. Rainfall increases more in the western study area when the active MJO and more in the eastern study area when the inactive MJO is due to SS. SS reduces rainfall in the Jakarta region, regardless of the activity or inactivity of the MJO. SS causes extreme rainfall to only occur in a small part of certain areas, so it tends to significantly reduce the possibility of extreme rainfall. In the southern part of the IMC, SS predominates over MJO in supporting increased water vapor transport. Large-scale synoptic circulations like the monsoon, SS, and MJO can interact with local land-sea wind circulation to produce spatiotemporal variability in rainfall on Java Island. Rainfall mostly increases in the afternoon and decreases in the morning when SS occurs, whether there is MJO or not. Convective instability analysis indicates that SS increases precipitation, most likely by lowering CIN and raising VIMFC.

Glycosidic linkage analysis was conducted on the unfractionated polysaccharides in the alcohol-insoluble residues (AIRs) prepared from six red seaweeds (Gracilariopsis sp., Prionitis sp., Mastocarpus papillatus, Callophyllis sp., Mazzaella splendens, and Palmaria palmata) using GC-MS/FID analysis of partially methylated alditol acetates (PMAAs). The cell walls of P. palmata primarily contained mixed-linkage xylans and small amounts of sulfated galactans and cellulose. In contrast, the unfractionated polysaccharides of the other five species were rich in galactans displaying diverse 3,6-anhydro-galactose and galactose linkages with varied sulfation patterns. Different levels of cellulose were also observed. This glycosidic linkage method offers advantages for cellulose analysis over traditional monosaccharide analysis that is known for underrepresenting glucose in crystalline cellulose. Relative linkage compositions calculated from GC-MS and GC-FID measurements showed that anhydro sugar linkages generated more response in the latter detection method. This improved linkage workflow presents a useful tool for studying polysaccharide structural variations across red seaweed species. Furthermore, for the first time, relative linkage compositions from GC-MS and GC-FID measurements, along with normalized FID and total ion current (TIC) chromatograms without peak assignments, were analyzed using principal component analysis (PCA) as a proof-of-concept demonstration of the technique's potential to differentiate various red seaweed species.

Background: Educating college students about the importance of good sleep habits could lead to the adoption of healthier sleep routines, including sufficient sleep duration and sleep quality. The current pre-post study examines the impact of completing a sleep education program called “Sleep 101” on (1) sleep hygiene practices, (2) sleep quality, and (3) weekday and weekend sleep behaviors among college students. “Sleep 101” is an interactive online course developed to educate college students about the importance of sleep by addressing basic sleep physiology, the impact of sleep on mood, academic and physical performance, the interactions between sleep and various substances, and common sleep disorders. Methods: 338 college students were recruited from a midsized public university in the US and invited to participate in “Sleep 101”, of which 25 participants completed the baseline and post-intervention questionnaire. The Sleep Hygiene Index (SHI) was utilized to evaluate sleep hygiene practices, while standard questions were employed to assess weekday and weekend sleep behaviors and overall sleep quality. Results: Those who completed the study demonstrated a significant increase in weekday sleep duration and were less likely to engage in negative prior bedtime activities. In addition, 40% of those who completed baseline and post-intervention assessments noticed improvements in their sleep quality. Conclusion: These findings suggest that a brief online program is beneficial in improving sleep behaviors among college and could be a scalable approach to addressing current sleep issues and preventing future sleep problems in college students.