This study aims to identify the factors determining the income of forestry household in South Korea. We examine an empirical analysis using 3-year panel data conducted by the Korea Forest Service charged with maintaining South Korea's forest lands. The hypothesized factors determining the income of forestry household are classified into four types of assets and three types of livelihood strategies. We divided the income of forestry household (IFH) into three elements: forestry income (FI), non-forestry income (NFI), and transfer income (TI). We assessed the influences of household assets and livelihood strategies on each income. A random effect model was used as a statistical analysis with valid 979 of forestry household for three years. We found that household head's age, labor hours, savings, business category, cultivated land size, and region are significantly associated with IFH. Also, FI is influenced by labor capacity, cultivated size, business category, forestry business portfolio, and region while NFI is determined by household head's age, household head's gender, forestry business portfolio, and savings. TI is affected by household head's age, household head's education level, forestry business portfolios, savings, and region. The effect sizes and directions vary across different types of income (IFH, FI, NFI, and TI). The findings show that forestry in South Korea is highly dependent on sustainable assets and strategies. It is therefore expected that the effectiveness of forest policies to increase the income of forestry household would be differed by the source of each income. The results of this study draw attention to the need for an income support policy that should consider the characteristics of household assets and livelihood strategies in order to enhance IFH in South Korea.

Andrographis paniculata leaves have been widely used in traditional medicine due to their rich content of phenolic compounds. In this study, we evaluated the total phenolic and flavonoid content of Andrographis paniculata leaf extracts (ALE), as well as its antioxidant activities against DPPH, ABTS, and hydrogen peroxide radicals. Additionally, we conducted cell viability assays, RT-PCR, and western blot analysis to investigate the biochemical effects of ALE on UVB-induced HaCaT cells. Our results revealed that ALE exhibited a high concentration of polyphenols and flavonoids, which were associated with potent abiotic antioxidant properties. Furthermore, ALE treatment effectively abrogated the damage caused by UVB radiation on key molecules such as hyaluronan synthase 1, Aquaporin 3, and loricrin in HaCaT cells. ALE also demonstrated the ability to reduce the overactivation of mitogen-activated protein kinases (MAPKs) and the expression of pro-inflammatory cytokines, including interleukin-6 and interleukin-1β in UVB-induced HaCaT cells. Additionally, ALE positively influenced the peroxisome proliferator-activated receptor alpha in these cells. Overall, our findings highlight the antioxidant and anti-inflammatory effects of ALE, as well as its significant role in modulating skin barrier functions. These results contribute to the growing body of evidence supporting the therapeutic potential of ALE in skincare and dermatological applications.

To identify gender- and age-related associations between adult dental checkups and unmet dental care needs, we analyzed data of 14,000 participants, ages ≥ 19, from the 7th Korea National Health and Nutrition Examination Survey (2016–2018) (KNHANES VII). Data was collected via self-report questionnaires and interviews. Complex sample chi-square test and multiple logistic regression analysis indicated 31.7% of participants had unmet dental care needs; in the prior 12months, 67.1% had not utilized dental services, and 43.3% had not received dental checkups. Odds ratios (ORs) for dental checkups and unmet dental needs were 8.87 (CI:7.80–10.09, p < 0.001) for those who used dental services and 1.28 (CI: 1.13–1.44, p < 0.001) for those who had not. Significant age-dependent associations between those not receiving dental checkups and the rate of unmet dental care include men and women aged 50–59 years (OR: 1.77; CI = 1.22–2.58 and OR: 1.43; CI: 1.02–2.02; p = 0.040, respectively) and women ≥ 70 years (OR = 1.79, CI = 1.20–2.66, p = 0.004). Reducing unmet dental care needs requires greater public health promotion and education regarding regular dental checkups; additional practical strategies could enhance dental checkup compliance.

Radiator reliability is crucial in environments characterized by high temperatures and friction, where prompt interventions are often required to prevent system failures. This study introduces a proactive approach to radiator fault diagnosis, leveraging the integration of Gaussian Mixture Model (GMM) and Long-Short Term Memory (LSTM) autoencoders. Vibration signals from radiators were systematically collected through randomized durability vibration bench tests, resulting in four operating states—two normal, one unknown, and one faulty. Time-domain statistical features of these signals were extracted and subjected to Principal Component Analysis (PCA) to facilitate efficient data interpretation. Subsequently, this study discusses the comparative effectiveness of GMM and LSTM in fault detection. GMMs are deployed for initial fault classification, leveraging their clustering capabilities, while LSTM autoencoders excel in capturing time-dependent sequences, facilitating advanced anomaly detection for previously unencountered faults. This alignment offers a potent and adaptable solution for radiator fault diagnosis, particularly in challenging high-temperature or high-friction environments. Consequently, the proposed methodology not only provides a robust framework for early-stage fault diagnosis but also effectively balances diagnostic capabilities during operation. Additionally, this study presents the foundation for advancing reliability life assessment in accelerated life testing, achieved through dynamic threshold adjustments using both the absolute log-likelihood distribution of the GMM and the reconstruction error distribution of the LSTM autoencoder model.

Standardized protocols were specifically designed and developed for clinical information collection and obtaining trio genomic information from infants affected with congenital anomalies (CA) and their parents, as well as securing human biological resources. Two large areas of these protocols include clinical and genomic information collection on CA which were difficult to diagnose using pre-existing screening methods. The following are three essential items for the clinical information collection protocol: establishment of a consent system for collecting and utilizing research resources, establishment of criteria for target patient selection, and collection of clinical and epidemiological information. A total of 138 cases consisting of 45 families of infants with CA and their parent trios have provided human-derived resources and genomic information. Whole genome sequencing data have been generated for all participants, and standardized protocols for resource collection and manufacturing have been developed. Phenotype information according to the Human Phenotype Ontology term and major test findings were recorded. It is important to keep updating and recording clinical symptoms and genetic diagnosis that are newly added or changed over time. The unique significance of this study is to develop a protocol that enables long-term tracking by adding growth and development tests that reflect important characteristics of newborns. By using these clinical and genetic information collection protocols for CA, it will be possible to establish an essential platform for early genetic diagnosis and diagnostic research, and further present new genetic diagnostic guidelines in the near future.

The hematopoietic system plays a crucial role in immune defense response and normal development, and is regulated by various factors from other tissues. The dysregulation of hematopoiesis is associated with melanotic mass formation; however, the molecular mechanisms underlying this process are poorly understood. Here, we observed that the overexpression of miR-274 in the fat body resulted in the formation of melanotic masses. Moreover, abnormal activation of the JNK and JAK/STAT signaling pathways was linked to these consequences. In addition to this defect, miR-274 overexpression in the larval fat body decreased the total tissue mass, leading to a reduction in body weight. miR-274-5p was found to directly suppress the expression of found-in-neurons (fne), which encodes an RNA-binding protein. Similar to the effects of miR-274 overexpression, fne depletion led to melanotic mass formation and growth reduction. Collectively, miR-274 plays a regulatory role in the fne-JNK signaling axis in melanotic mass formation and growth control.

In accordance with regulations set forth by the Ministry of Land, Infrastructure, and Transport in Korea regarding the "Flame Retardant Performance of Building Finishing Materials and Fire Spread Prevention Structure," it is mandated that semi-noncombustible materials have a total heat emission less than 8 MJ/m². Consequently, our study aimed to determine the ideal quantity of flame-retardant treatment required to meet the fire safety standards for Korean larch and Japanese cedar, commonly used exterior materials in Korean construction. To this end, we investigated using a cone calorimeter to observe changes in the THR (Total Heat Released) based on the AFI (Amount of Flame-retardant Impregnation) in Korean larch and Japanese cedar. Our findings indicated that the AFI needed to satisfy the prescribed flame-retardant standard of 8 MJ/m² was THR 299 MJ/m² for Korean larch and THR 526 MJ/m² for Japanese cedar. As a result, we established optimal impregnation levels of flame retardant for both species.

Gastrodia pubilabiata is a nonphotosynthetic and mycoheterotrophic orchid belonging to subfamily Epidendroideae. Compared to other typical angiosperm species, the plastome of G. pubilabiata is dramatically reduced in size to be only 30,698 base pairs (bp). This reduction has led to the loss of most photosynthesis-related genes and some housekeeping genes in the plastome, which now only contains 19 protein coding genes, three tRNAs, and three rRNAs. This study decoded the entire mitogenome of G. pubilabiata, which consisted of 44 contigs with a total length of 867,349 bp. Its mitogenome contained 38 protein coding genes, nine tRNAs, and three rRNAs. To determine possible gene transfer events between the plastome and the mitogenome, individual BLASTN searches were conducted, using all available orchid plastome sequences and flowering plant mitogenome sequences. Plastid rRNA fragments were found at a high frequency in the mitogenome. Seven plastid protein coding gene frangments (ndhC, ndhJ, ndhK, psaA, psbF, rpoB, and rps4) were also identified in the mitogenome of G. pubilabiata. Phylogenetic trees using these seven plastid protein coding gene fragments suggested that horizontal gene transfer (HGT) from plastome to mitogenome occurred before losses of photosynthesis related genes, leading to the lineage of G. pubilabiata. Compared to species phylogeny of the lineage of orchid, it was estimated that HGT might have occurred approximately 30 million years ago.

: The primary objective of this study was to investigate the association of certain genetic alterations and intraoperative fluorescent activity of 5-aminolevulinic acid (ALA) in brain metastasis (BM) of lung adenocarcinoma. A retrospective cohort study was conducted among 72 patients who underwent surgical resection of BM from lung adenocarcinoma at our institute for 5 years. Cancer cell infiltration was estimated by the intraoperative fluorescent activity of 5-ALA, and genetic alterations were analyzed by next-generation sequencing (NGS). The sensitivity and specificity for detecting cancer cell infiltration using 5-ALA were 87.5% and 96.4%, respectively. Genes associated with cell cycle regulation (p = 0.003) and cell proliferation (p = 0.044) were significantly associated with positive fluorescence activity of 5-ALA in the adjacent brain tissue. Genetic alterations in cell cycle regulation and cell proliferation were also associated with shorter recurrence-free survival (p = 0.013 and p = 0.042, respectively) and overall survival (p = 0.026 and p = 0.042, respectively) in the multivariate analysis. The results suggest that genetic alterations in cell cycle regulation and cell proliferation are associated with positive fluorescence activity of 5-ALA in the adjacent infiltrative brain tissue and influence the clinical outcome of BM of lung adenocarcinoma.

We investigated the effect and molecular mechanism of 24-MCF-induced PPAR-γ2 on angiogenesis-related genes in MCF7 cells. cDNA microarray, semi-quantitative reverse transcription (RT)-PCR, and western blotting revealed that 24-MCF mediated the expression of genes related to angiogenesis in MCF-7 cells. Luciferase reporter assay demonstrated that promoter activation of the LIF gene, an anti-angiogenesis factor, was increased upon PPAR-γ2 overexpression and 24-MCF treatment, whereas activation of HoxA7 and VEGF promoters, known pro-angiogenesis factors, decreased upon PPAR-γ2 overexpression and 24-MCF treatment. We identified PPAR-response elements (PPRE) located in the VEGF (-913 to +1), HoxA7 (-1107 to +1), and LIF promoter regions (-9032 to -8403). VEGF promoter activity was abolished by mutation of the PPRE motif. Treatment with 24-MCF inhibited expression of VEGF and inhibited the Akt/mTOR pathway. Treatment with 24-MCF also decreased VEGF secretion in MCF7 cells and PMA-stimulated tube formation in HUVECs. Our findings suggest that 24-MCF induces PPAR-γ2-mediated regulation of anti-angiogenesis via PPRE motifs in VEGF, HoxA7, and LIF promoters or upstream regions. Furthermore, 24-MCF treatment inhibits angiogenesis by blocking VEGF secretion.

Several studies in computer vision have examined specular removal, which is crucial for object detection and recognition. This research has traditionally been divided into two tasks: specular highlight removal, which focuses on removing specular highlights on object surfaces, and reflection removal, which deals with specular reflections occurring on glass surfaces. In reality, however, both types of specular effects often coexist, making it a fundamental challenge that has not been adequately addressed. Recognizing the necessity of integrating specular components handled in both tasks, we constructed a Specular-Light (S-Light) DB for training single-image-based deep learning models. Moreover, considering the absence of benchmark datasets for quantitative evaluation, the Multi-Scale Normalized Cross Correlation (MS-NCC) metric, which considers the correlation between specular and diffuse components, was introduced to assess the learning outcomes.

Due to wood’s susceptibility to fire, it is crucial to treat wood-based materials with flame retardants, especially in construction applications. This study investigated the effectiveness of various grooving types, including transverse, longitudinal, both transverse and longitudinal, and surface grooving, in enhancing larch's vacuum pressure impregnation process. The results revealed that transverse grooving provided a slightly greater impregnation advantage than longitudinal grooving. Moreover, exceptional impregnation performance was observed in larch samples subjected to both longitudinal and transverse grooving and surface grooving, exhibiting a remarkable improvement of 214,7 % compared to untreated larch.

As the worldwide demand for meat per person is continuously increasing, there is a corresponding rise in the number of livestock animals, leading to an increase in livestock manure. Selecting appropriate treatment technologies for livestock manures is still a complex task and considerable debates over this issue persist. To develop a more comprehensive understanding of the manure treatment framework, this review was undertaken to assess the most utilized manure management technologies and underscore their respective challenges. Anaerobic digestion has become a commercial reality for treating livestock manures. However, the mono-digestion of single substrates comes with certain drawbacks associated with manure characteristics. Anaerobic co-digestion, involving the utilization of multiple feedstocks, holds the potential to overcome these limitations. Extensive research and development have underscored numerous intrinsic benefits co-digestion. These include improved digestibility resulting from synergistic effects of co-substrates and enhanced process stability. This review underscores the limitations associated with the mono-digestion of livestock manures and critically evaluates the advantages of their co-digestion with carbon-rich substrates. Additionally, this review delves into key livestock manure management practices globally, emphasizing the significance of co-digesting livestock manures while addressing the progress and challenges in this field.

Transcriptionally controlled tumor protein (TCTP) is a highly conserved protein performing a large number of cellular functions by binding with various partner proteins. The importance of its roles in many diseases requires an assay method to find regulatory compounds. However, the molecular characteristics of TCTP made it difficult to search for chemicals interacting with it. In this study, a tryptophan-based assay method was designed and Y151W mutant TCTP was constructed to search binding chemicals. Since there is no tryptophan in the native sequence of TCTP, the incorporation of tryptophan in the Y151W mutant was very effective to establish the method. A flavonoid library was employed to the assay with the method. With the native and Y151W mutant TCTPs, three flavonoids such as morin, myricetin and isobavachalcone have been found to interact with TCTP. Combined with native gel electrophoresis, the binding region of isobavachalcone was suggested to be the flexible loop of TCTP. This approach can be easily applicable to find binding compounds of proteins with similar molecular characteristics of TCTP.

Abstract: Radiation-induced skin injury can be a serious cutaneous damage and have specific characteristics. Asymptomatic periods are classified as the latent stage. The skin barrier plays a critical role in the modulation of skin permeability and hydration and protects the body against a harsh external environment. However, an analysis on the skin barrier dysfunction against radiation exposure in the latent stage has not been conducted. Thus, we investigated whether skin barrier is impaired by irradiation in the latent stage and aimed to identify the molecules involved in skin barrier dysfunction. We analyzed skin barrier function and its components in SKH-1 mice that received 20 and 40 Gy local irradiation. Increased transepidermal water loss and skin pH were observed in the latent stage of the irradiated skin. Skin barrier components, such as structural proteins and lipid synthesis enzymes in keratinocyte, increased in the irradiated group. Interestingly, we noted sebaceous gland atrophy and increased serine protease and inflammatory cytokines in the irradiated skin during the latent period. This finding indicates that the main factor of skin barrier dysfunction in the latent stage of radiation-induced skin injury is sebaceous gland deficiency, which could be an intervention target for skin barrier impairment.

The objective of this study was to evaluate the effects of dietary supplementation with bacteriophage and β-mannanase on health and growth performance in calves. Thirty-six pre-weaning male Holstein calves were randomly allocated to one of four dietary treatments: no supplementation, 0.1% β-mannanase, 0.1% bacteriophage, and both 0.1% bacteriophage and β-mannanase supplementation in a starter. The experiment lasted from 2 weeks before weaning to 8 weeks after weaning. Twenty-two calves survived to the end of the experiment. No interaction was observed between the two methods of supplementation. A 1-kg increase in initial BW resulted in a 1.41-fold increase in the odds ratio of survival (p < 0.01). The bacteriophage supplementation tended to increase the odds ratio of survival (p = 0.09). The number of Escherichia coli in feces significantly decreased one week after weaning. β-mannanase supplementation increased the concentrates intake (p < 0.01) and tended to increase the final BW (p = 0.08). Analysis of repeated measures indicated β-mannanase supplementation increased weekly body weight gain (p = 0.018). We conclude that bacteriophage supplementation may have a positive effect on calf survival rate, while β-mannanase supplementation may increase the growth rate and intake of a starter in calves.

The association between the choice of general anesthetic agents and the risk of acute kidney injury (AKI) and long-term renal function after nephrectomy has not yet been evaluated. We reviewed 1087 cases of partial or radical nephrectomy. The incidence of postoperative AKI, new-onset chronic kidney disease (CKD) stage 3a and CKD upstaging were compared between different general anesthetic agent groups: propofol, sevoflurane, and desflurane. Four different propensity score analyses were performed to minimize confounding for each pair of comparison (propofol vs sevoflurane; propofol vs desflurane; sevoflurane vs desflurane; propofol vs volatile agents). Study outcomes were compared before and after matching. Kaplan-Meier survival curve analysis was performed to compare renal survival determined by the development of CKD stage 3a between groups up to 36 months after nephrectomy before and after matching. Propofol was associated with a lower incidence of AKI, CKD upstaging and a higher three-year renal survival after nephrectomy compared to sevoflurane or desflurane group after matching (AKI: propofol 23.2% vs. sevoflurane 39.5%, P=0.004, vs. desflurane 34.3%, P=0.031; CKD upstaging: propofol 27.2% vs. sevoflurane 58.4%, P<0.001, vs. desflurane 48.6%, P=0.017; Log-rank test propofol vs. sevoflurane P<0.001, vs. desflurane P=0.015). Propofol was also associated with a lower incidence of new-onset CKD after nephrectomy compared to sevoflurane after matching (P<0.001). However, there were no significant differences between sevoflurane and desflurane. In conclusion, propofol, compared to volatile agents, may be the reasonable choice of general anesthetic agent for nephrectomy to attenuate postoperative renal dysfunction. Randomized prospective trials are warranted to test this hypothesis.

The Hwangdo tidal flat is an intertidal landform located in Cheonsu Bay, Taean-gun, Chungcheongnam-do, on the west coast of Korea. The topographical characteristics of the semi-enclosed bay on the eastern side of the study area include waterways, sandbars, small islands, and tidal flats. In this study, data were acquired from tide gauges installed on the Hwangdo Bridge, and the height of the ellipsoid was measured using a real-time kinematics global positioning system (RTK-GPS). Digital elevation model (DEM) using Matrice 300 drone data were also acquired after processing. The geochemical sediment characteristics in the study area were analyzed, together with tidal-flat exposure-time characteristics based on environmental factors. Sediment data (n = 107) collected from October 25 to 28, 2022 (Korean local time) were used to classify sediment particles according to Folk and Ward (1957). Sedimentary facies ranged from coarse sand (sand:mud ratio = 9:1) to sandy silt (sZ) followed by muddy sand (mS) and slightly gravelly sandy mud ((g)sM). Total organic carbon (TOC) in the surface sediments were also characterized based on a particle-size analysis. The mean change in tidal height measured at Hwangdo Bridge during the sampling period was ~7.53 m (minimum: –3.86 m, maximum: +3.67 m). Based on the Boryeong's sea level measurement tide data in 2022, the tidal area in the drone images ranged from 6.362 m² (0.006 km²) at DEM +4.0 to 4,841,078 m² (4.841 km²) at DEM –4.0 m, indicating an increase in the tidal-flat area according to the tidal level of up to ~800-fold. The daily average exposure time was 9.0 h (minimum: 1.5 h, maximum: 17.9 h). Based on the results of multivariate analysis using exposure times and a geochemical dataset, four groups were identified: upper, middle, and lower intertidal zones and regions with a relatively high organic-matter concentration. A determination of the main characteristics of the Hwangdo tidal flat according to their spatial distribution showed that, among various environmental factors, changes in the sand or clay sediment composition were determined by community factors. The results of this study demonstrate the four statistically processed groups of marine environmental characteristics in the Hwangdo tidal flats. Changes in sedimentary patterns, rather than in the exposure time, accounted for the differences in the sediment compositions of the upper, middle, and lower stations, a response that is expected to continue.

Phialemonium inflatum is a useful fungus known for its ability to mineralise lignin during primary metabolism and decompose polycyclic aromatic hydrocarbons (PAHs). However, no functional genetic analysis techniques have been developed yet for this fungus, specifically in terms of transformation. In this study, we applied an Agrobacterium tumefaciens-mediated transformation (ATMT) system to P. inflatum for functional gene analysis. We generated 3,689 transformants using the binary vector pSK1044, which carried either the hygromycin B phosphotransferase (hph) gene or the enhanced green fluorescent protein (eGFP) gene to label the transformants. Southern blot analysis showed that the probability of a single copy of T-DNA insertion was approximately 50% when the co-cultivation time of fungal spores and Agrobacterium tumefaciens cells was performed at 24–36 h, whereas at 48 h, it was approximately 35.5%. Therefore, when performing gene knockout using ATMT, co-cultivation was reduced to ≤ 36 h. The resulting transformants were mitotically stable, and PCR analysis confirmed gene integration into the transformant genome. Additionally, hph and eGFP gene expressions were confirmed by PCR amplification and fluorescence microscopy. This optimised transformation system will enable functional gene analysis to study genes of interest in P. inflatum.

Retinal apoptosis plays a critical role in the progression of diabetic retinopathy (DR), a common diabetic complication. Currently, the tight control of blood glucose levels is the standard approach to prevent or delay the progression of DR. However, prevalence of DR among diabetic patients remains high. Focusing on natural nutrients or herbal medicines that can prevent or delay the onset of diabetic complications, we administered an ethanol extract of the aerial portion of Osteomeles Schwerinae (OSSCE), a Chinese herbal medicine, over a period of 17 weeks to spontaneously diabetic Torii (SDT) rats. OSSCE was found to ameliorate retinal apoptosis through the regulation of advanced glycation end products (AGEs) accumulation, oxidative stress, and mitochondrial function via inhibition of NF-κB activity, in turn through the downregulation of PKCδ, P47phox, and ERK1/2. We further demonstrated in 25 mM glucose-treated human retinal microvascular endothelial cells (HRMECs) that hyperoside (3-O-galactoside-quercetin), quercitrin (3-O-rhamnoside-quercetin), and 2''-O-acetylvitexin (8-C-(2''-O-acetyl-glucoside)-apigenin) were the active components of OSSCE that mediated its pharmacological action. Our results provide evidence that OSSCE is a powerful agent that may directly mediate a delay in development or disease improvement in patients of DR.

The Korean Pathfinder Lunar Orbiter (KPLO)-MAGnetometer (KMAG) consists of three triaxial fluxgate sensors (MAG1, MAG2, and MAG3) to measure the magnetic field around the Moon. The three sensors are mounted in the order of MAG3, MAG2, and MAG1 inside a 1.2 m long boom away from the satellite body. Before it arrived on the Moon, we compared the magnetic field measurements taken by DSCOVR and KPLO in the solar wind to verify the measurement performance of the KMAG instrument. We found that there were artificial disturbances in the KMAG measurement data, such as step-like and spike-like disturbances, which were produced by the spacecraft body. To remove spacecraft-generated disturbances, we applied a multi-sensor method, employing the gradiometer technique and principal component analysis and using KMAG magnetic field data and confirmed the successful elimination of spacecraft-generated disturbances. This indicates that the multi-sensor method is able to clean the magnetic field data measured onboard the KPLO.

Recently Kawashima has reported that, when wetted with alkanes, several forms of graphite and single-layer graphene exhibit superconductor-like properties above room temperature under ambient pressure [AIP Adv. 2013, 3, 052132; arXiv:1612.05294; arXiv:1801.09376]. Under the assumption that these seemingly unlikely properties arise from the presence of paired electrons brought about by the alkane-wetting, we explored their implications to arrive at a probable mechanism for strong electron-pairing driven by Fermi surface nesting and acoustic phonon. This mechanism explains why alkane-wetting is essential for the graphene systems to become “superconductor-like” above room temperature and why the “T_c” of alkane-wetted pitch-based graphite fibers increases almost linearly from ~363 to ~504 K with increasing the molecular weight of alkane from heptane to hexadecane. It also provides a number of experimentally-verifiable predictions, the confirmation of which will provide a strong support for the superconductivity driven by Fermi surface nesting and acoustic phonon.

Resection of malignant lesions in the oral and maxillofacial area causes functional and morphological defects. To recover from these defects, reconstruction surgery is needed such as a primary closure or a flap. There are advantages and disadvantages to the method of using the primary closure and the flap, and the choice of procedure is entirely up to a surgeon. The purpose of this study is to evaluate availability of primary closure in patients. For 10 years from January 2010 to May 2020, patients who recovered using flaps after removing malignant lesions from the oral cavity and those who closed the lesion using primary closure were investigated. The investigation was conducted by searching the database of the hospital. There were 85 patients who removed malignant lesions in the oral and maxillofacial area, and among them 16 patients closed the soft tissue defects using primary closure. Operation time, histologic types, stages, wound status, and period of hospitalization according to the patients' medical records were investigated retrospectively. Between the staging and the primary closure, statistically significant differences were observed between stage I and stage II patients in 13 patients using the primary closure. (P=0.046). Statistically significant differences were identified between operation time and primary closure, with an average of 4.02 hours (P=0.015). The average period of hospitality for patients who underwent primary closure was 13.4 days, compared to 26.7 days for those who underwent flap surgery. This difference was statistically significant (P=0.0003). This study evaluated the use of primary closure in patients who underwent resection of malignant lesions in the oral and maxillofacial area. Although the majority of patients underwent reconstruction with flaps, our results showed that primary closure can be a viable option for certain patients with early-stage lesions. Therefore, oral and maxillofacial surgeons should carefully consider various evaluation criteria and select appropriate reconstruction methods to optimize functional and aesthetic outcomes for each patient.

Acute myeloid leukemia (AML) is an aggressive malignancy characterized by rapid growth and uncontrolled proliferation of undifferentiated myeloid cells. Metabolic reprogramming is commonly observed in the bone marrow of AML patients, as leukemia cells require increased ATP supply to support disease progression. In this study, we examined the potential role of mesothelin as a metabolic modulator in myeloid cells in AML. Mesothelin is a well-known marker of solid tumors that promotes cancer cell proliferation and survival. We initially analyzed alterations in mesothelin expression in the myeloblast subpopulations, defined as SSC-Alow/CD45dim, obtained from bone marrow of AML patients using flow cytometry. Our results showed overexpression of mesothelin in 34.8% of AML patients. Subsequently, metabolic changes in leukemia cells were evaluated by comparing the oxygen consumption rates (OCR) of bone marrow samples derived from adult AML patients. Notably, higher OCR was observed in the mesothelin-positive compared to the mesothelin-low and non-expressing groups. Treatment with recombinant human mesothelin protein enhanced OCR and increased the mRNA expression of glycolytic enzymes and mitochondrial complex II in KG1α AML cells. Notably, siRNA targeting mesothelin in KG1α cells led to reduction of glycolysis-related gene expression but had no effect on the mitochondrial complex gene. The collective results demonstrate that mesothelin induces metabolic changes in leukemia cells, facilitating acquisition of a rapid supply of ATP for proliferation in AML. Therefore, targeting of mesothelin presents a potentially promising approach for mitigating the progression of AML through inhibition of glycolysis and mitochondrial respiration in myeloid cells.

This study evaluated the effects of high-temperature and high-pressure treatment on the antioxidant and anti-inflammatory activities of carrot extracts. The total polyphenol and flavonoid content of heated carrot extract increased as the heating temperature increased, with 403.93 mg GAE/100 g and 53.14 mg CE/100 g at 150°C. DPPH and ABTs radical scavenging activity (IC50) of heated carrot extract also increased as the heating temperature increased, with 4.65 mg/mL and 7.31 mg/mL, respectively, at 150°C. The reducing power increased with the heating temperature. Heated carrot extract did not exhibit any temperature- or concentration-dependent cytotoxicity. Nitric oxide (NO) generation was suppressed as the heating temperature and NO production increased. The heated carrot extract showed a decrease in the production of dose-dependent TNF-α, IL-1β, and IL-6 compared to the control group. The above results show that heated carrot extract had effective antioxidant and anti-inflammatory activities.

Background and aim. The study aimed to assess the efficacy of the treatment of Kan Jang®, a fixed combination of Andrographis paniculata (Burm. F.) Wall. ex. Nees and Eleutherococcus senticosus (Rupr. & Maxim.) Maxim in patients with mild symptoms of COVID-19. Methods. One hundred forty patients received six capsules of Kan Jang® (n = 68, daily dose of andrographolides – 90 mg) or placebo (n=72) and supportive treatment (paracetamol) for 14 consecutive days in a randomized, quadruple-blinded, placebo-controlled, two-parallel-group design. The efficacy outcomes were the rate of cases turning to severe, the detection rate of SARS-CoV-2 virus over the time of treatment, the duration and the severity of symptoms (sore throat, runny nose, cough, headache, fatigue, loss of smell, taste, pain in muscles) in the acute phase of the disease. Other efficacy measures included improving cognitive and physical performance, quality of life, and the levels of inflammatory blood markers - IL-6, c-reactive protein, and D-dimer. Results. Kan Jang® significantly (p < 0.05) reduced the rate of cases turning to severe (5.36%) compared to placebo (17.86%) and decreased the detection rate of SARS-CoV-2 virus over the time of treatment. The statistical difference in the rates of patients with clinical deterioration in the Kan Jang treatment and placebo control groups was significant (p = 0.0176) both in 112 patients included per protocol (IPP) analysis and in 140 patients included per intention to treat (ITT) analysis (p = 0.0236); the absolute risk reduction of cases by Kan Jang treatment was 12.5%, and the number Needed to Treat by Kan Jang was 8. The patient's recovery time (Number of sick days at the home/clinic) was shorter in the Kan Jang group compared with the placebo group. The rate of resolution of inflammatory symptoms in the Kan Jang® group was significantly higher compared with the placebo group, and relief of the severity of cough, sore throat/pain, runny nose, and muscle soreness. Kan Jang® significantly decreased the Wisconsin Upper Respiratory Symptoms scores compared to placebo in the sample size of 140 patients. However, the relief of fatigue and headache and the decrease of IL-6 in the blood was observed only in a subset of the 86 patients infected during the second three waves of the pandemic. Kan Jang® significantly increased physical activity and workout; however, it did not affect cognitive functions (attention and memory), Quality of life Score, inflammatory markers D-dimer, and c-reactive protein compared with the placebo group. Conclusions. Overall, the results of this study suggest that Kan Jang® is effective in treating mild and moderate COVID-19 irrespective of SARS-Cov-2 variants infection.

This study explores the application of numerical analysis and material models to predict ice impact loads on ships and offshore structures operating in polar regions. An explicit finite element analysis (FEA) approach was employed to simulate an ice and steel plate collision experiment conducted in a cold chamber. The pressure and strain history during the ice collision were calculated and compared with the experimental results. Various material model configurations were applied to the FEA to account for the versatile behavior of ice—whether ductile or brittle—its elastic-plastic yield criteria, and its dynamic strain rate dependency. In addition to the standard linear elastic perfectly plastic and linear elastic-plastic relationships, this study incorporated the crushable foam and Drucker-Prager models, based on the specific ice yield criteria. Considering the ice’s strain rate dependency, collision simulations were conducted for each yield criteria model to compute the strain and reaction force of the plate specimens. By comparing the predicted pressures for each material model combination with the pressures from ice collision experiments, our study proposes material models that consider the yielding, damage, and behavioral characteristics of ice. Lastly, our study proposes a combination of ice material properties that can accurately predict collision force.

Objective: The purpose of this study was to determine if Porphyra tenera extract (PTE) has immune-enhancing effects and is safe in healthy adults. Methods: Subjects (3x10³ ≤ peripheral blood leukocyte levels < 8x10³ cells/μl) who met the inclusion criteria were recruited for this study. Enrolled subjects (n=120) were randomly assigned to either the PTE group (n=60) who were given 2.5 g/day of PTE (as Porphyra tenera extract) in capsule form or the placebo group (n=60) who were given crystal cellulose capsules with the identical appearance, weight, and flavor as the PTE capsules for 8 weeks. Outcomes were assessed by measuring natural killer cell (NK-cell) activity, cytokines, and upper respiratory infection (URI), and safety parameters were assessed at baseline and 8 weeks. Results: Compared to baseline, NK cell activity (%) increased for all effector cell to target cell ratios in the PTE group after 8 weeks, but there were no changes in the placebo group (p<0.1). Subgroup analysis of 101 subjects without an URI revealed that NK-cell activity in the PTE group tended to be increased for all E:T ratios (E:T=12.5:1 p=0.068; E:T=25:1 p=0.036; E:T=50:1 p=0.081) compared to the placebo group. There was a significant difference between these two groups for the E:T=25:1 ratio, which increased from 20.3±12.0% at baseline to 23.2±12.4% after 8 weeks in the PTE group (p=0.036). There was no significant difference in levels of cytokines between these two groups. Conclusions: PTE supplementation appears to enhance immune function by improving NK-cell activity without adverse effects in healthy adults.

Croton L. (Euphorbiaceae) is a very specious genus and consists of about 1,250 species, mainly distributed in tropical Asia and China. The first complete plastome sequence from the genus, Croton tiglium, is reported in this study (NCBI acc. No. MH394334). The plastome is 150,021 bp in length. The lengths of LSC and SSC are 111,654 bp and 18,167 bp, respectively. However, the length of the IR region is only 10,100 bp and includes only four rrn and four trn genes, and a small part of the ycf1 gene. We propose two-step IR contractions to explain this unique IR region of the C. tiglium plastome. First, the IR contracted from rps19-rpl2 to ycf2-trnL-CAA on the LSC/IRb boundary. Second, the IR contracted from ycf2-trnL-CAA to rrn16-trnV-GAC on the LSC/IRa boundary. In addition, duplicated copies of psaI genes were discovered in the C. tiglium plastome. Both copies were located side by side between accD and ycf4 genes, but one copy was pseudogenized because of a five-basepair (TAGCT) insertion in the middle of the gene following frameshift mutation. The plastome contains 112 genes, of which 78 are protein-coding genes, 30 are tRNA genes, and four are rRNA genes. Sixteen genes contain one intron and two genes have two introns. The infA gene is lost. Twelve large repeats were detected in the plastome. All large repeats are located in the LSC region. Also, 272 simple sequence repeats (SSRs) were identified. The penta-SSRs accounted for 45% of total SSRs, followed by mono- (32%), di- (12%), tetra (6%) and tri-SSRs (5%). Most of them were distributed in the large single copy (LSC) region (85%). In addition, 76% of the SSRs were located in the intergenic spacer (IGS). Phylogenetic analysis suggested that C. tiglium is a sister group of Jatropha curcas with 100% bootstrap support. Seven Euphorbiaceae species formed one clade with 100% bootstrap support.

In this paper, we investigate the new degenerate Daehee polynomials and numbers which are called the degenerate Daehee polynomials of the second kind, and derive some new and interesting identities and properties of those polynomials.

Flammability was evaluated and the results showed the values of critical flux at extinguishment (CFE) as 49.5kW/㎡ on average, total heat release (Qt) as 0.21MJ on average, and peak heat release rate (Qp) as 0.66kW on average, which satisfied all of the thresholds presented by the IMO. Therefore, flame-retardant plywood, of which the flame-retardant performance was evaluated, was determined to be an applicable finishing material that satisfies fire safety standards.

This study examines the causal relationships between interest rates in the Korean financial market using a vector error correction model (VECM) and a Bayesian network. The Bayesian network, a novel approach in this context, identifies two distinct transmission channels: one led by call rates (reflecting monetary policy) and another by 10-year Treasury bond yields (reflecting fiscal policy). While the call rate channel aligns with traditional views, affecting bank lending rates, corporate bond spreads, and commercial paper rates, the 10-year Treasury yield channel highlights a separate fiscal policy transmission mechanism, influencing commercial paper rates indirectly through 30-year Treasury yields and directly impacting merchant bank lending rates. This finding suggests that fiscal intervention could potentially interfere with monetary policy, emphasizing the need for coordinated macroeconomic policy measures. The study also emphasizes the role of 10-year Treasury bonds as a benchmark in the Korean bond market, reflecting medium- to long-term economic outlooks and serving as the underlying asset for various derivatives.

Acetic acid bacteria (AAB) are major contributors to the production of fermented vinegar, offering various cultural, culinary, and health benefits. Although the residual unpasteurized AAB after vinegar production are not pathogens, these are necessary the safety evaluations including antibiotic resistance for the use as starters. In this research, we investigated the antibiotics resistance profiles of 26 AAB strains, including various species of Komagataeibacter and Acetobacter, against ten different antibiotics using the E-test method. All strains exhibited resistance to aztreonam and clindamycin. Komagataeibacter species demonstrated a 50% resistance rate to ciprofloxacin, analogous to Acetobacter species, but showed twice the resistance rates to chloramphenicol and erythromycin. Genomic analysis of K. saccharivorans CV1 identified intrinsic resistance mechanisms, such as multidrug efflux pumps, thereby enhancing our understanding of antibiotic resistance in acetic acid-producing bacteria. These findings enhance understanding of antibiotic resistance in AAB for food safety and new antimicrobial strategies, suggesting the need for standardized testing methods and molecular genetic study.

Background: Albumin has a pivotal role in the homeostasis of osmotic pressure and is associated with cardiovascular, nephrotic, hepatic, and nutritional diseases. The detection of hypoalbuminemia is a cornerstone for diagnosis of hidden diseases and patient deterioration. We developed and validated a deep-learning-based model (DLM) for detection of hypoalbuminemia using electrocardiography (ECG). Methods: This historical cohort study included data from consecutive patients from two hospitals. The patient data in one hospital were divided into development (82,499 ECGs from 54,248 patients) and internal validation (20,664 ECGs from 20,664 patients) datasets, whereas the patient data in the other hospital were included in only an external validation (37,421 ECGs from 37,421 patients) dataset. An DLM was developed using a 12-lead ECG signal, age, and sex from the development dataset. The endpoint was hypoalbuminemia, defined by serum albumin concentration below 3.5 g/dL. Results: During the internal and external validations, the areas under the receiver operating characteristic curve of the DLM for the detection of hypoalbuminemia were 0.887 (0.877–0.897) and 0.888 (0.880–0.896), respectively. Among the 27,400 individuals without hypoalbuminemia at the initial laboratory exam, those identified by the DLM as higher-risk patients had a significantly larger change in developing hypoalbuminemia than those in the low-risk group (7.09% vs. 1.01%, p < 0.001) during 24 months. The sensitivity map showed that the DLM focused on the T wave and QRS complex for the detection of hypoalbuminemia. Conclusions: The DLM exhibited a high accuracy for hypoalbuminemia detection and prediction using 12-, 6-, and single-lead ECGs.

Today’s export-based manufacturers face the need to implement green supply chains more efficiently in order to overcome environmental barriers in increasingly competitive export markets and to improve export performance. This study examines the structural relationship between environmental collaboration, green innovation capacity, and performance based on the findings of previous studies in order to identify the factors affecting the green supply chain management (GSCM) performance of Korean export-based manufacturers. The study finds that environmental collaboration in the green supply chain environment is an important driver of green innovation capacity for export-based Korean manufacturers. It also finds that green innovation capacity has a positive effect on export performance through environmental performance. This study establishes a theoretical basis for the systematic study of the structural mechanisms of green supply chains and suggests strategic directions for export-based manufacturing firms’ successful GSCM implementation.

In this study, the literature on varnish contamination is investigated among the various con-taminations of lubricant. As the period of use of lubricant increases, the lubricant deteriorates and becomes contaminated. The varnish causes filter plugging, sticking of hydraulic valves and fuel injection pumps, obstruction of flow, reduction of clearance, poor heater and cooler perfor-mance, and increase of friction and wear in various lubrication systems. These problems also cause mechanical system failure, performance degradation, and increased maintenance and re-pair cost. To improve the problems causes by the varnish, an adequate understanding of varnish is required. Therefore, in this literature review, definitions and characteristics, generating ma-chinery, generating mechanisms, causes, measurement methods, and prevention or removal methods are summarized. Most of the data are reports of companies related to lubricant and machine maintenance, and are included in some papers. We hope that this summary of varnish will be helpful to those who are engaged in reducing or preventing varnish problems.

Hepatocellular carcinoma (HCC) is currently the third leading cause of malignancy-related mortalities worldwide. Natural killer (NK) cells are involved in the critical role of first line immunological defense against cancer development. Defects in NK cell functions are recognized as important mechanisms for immune evasion of tumor cells. NK cell function appears to be attenuated in HCC, and many previous reports suggested that NK cells play a critical role in controlling HCC, suggesting that boosting the activity of dysfunctional NK cells can enhance tumor cell killing. However, the detailed mechanisms of NK cell dysfunction in tumor microenvironment of HCC remain largely unknown. A better understanding of the mechanisms of NK cell dysfunction in HCC will help in the NK cell-mediated eradication of cancer cells and prolong patient survival. In this review, we describe the various mechanisms underlying NK cell dysfunction in HCC. Further, we summarize current advances in the approaches to enhance endogenous NK cell function and in adoptive NK cell therapies, to cure this difficult-to-treat cancer.

Using the culture-work-health model, this study investigates the factors influencing the quality of life of maritime workers. This study conducted a survey of 320 maritime workers who have experience living and working on a ship for more than six months. This self-administered questionnaire included questions on organizational culture and support, self-efficacy, perceived fatigue, as well as the quality of work life. Organizational culture and self-efficacy were identified as factors affecting the quality of work life, while organizational support was found to have an indirect effect after passing through self-efficacy and perceived fatigue. The final model accounts for 63.1% of the variance in maritime workers’ quality of life. As such, this study shows that self-efficacy is important for the quality of life of maritime workers, having both direct and indirect effects. Moreover, organizational support may prove the primary intervention point for relieving perceived fatigue and enhancing self-efficacy, thus improving the quality of work life.

With continued technological innovation in the fields of mixed reality (MR), wearable-type MR devices, such as helmets, have been released and are frequently used in various fields, such as entertainment, training, and education. However, because each product has different parts and specifications in terms of the design and manufacturing process, users feel that the virtual objects overlaying real environments in MR are visualized differently depending on the scale and color used by the MR device. In this paper, we compare the effect of scale and color parameters on users’ perception in using different types of MR devices to improve MR experience. We conducted two experiments (scale and color), and our experimental study showed that the subjects who participated in the scale perception experiment clearly tended to underestimate virtual objects, compared with real objects, and overestimate color in MR environments. [MM1]Please confirm meaning.

During prolonged standing, insufficient calf muscle pumping accompanies venous stasis and hypertension in the lower legs, resulting in valve dysfunction, venous wall problems, and subsequent inflammation. Compression therapy, which includes medical compression stockings (MCS) and mechanical intermittent pneumatic compression (IPC), is one of the most effective therapeutic interventions for treating chronic venous diseases. This study aimed to investigate the safety and efficacy of IPC and MCS, and the optimal protocol of compression therapy for chronic venous disease. This crossover trial was conducted for healthy, long standing workers (>8 h daily) with leg edema and pain. Four groups were established for each visit: group A (resting after work without MCS), group B (resting after work with MCS), group C (IPC after work without MCS), and group D (IPC after work with MCS). The primary outcome was the visual analogue scale (VAS) score for leg pain. The secondary outcomes were leg volume (mL), circumference (cm), extracellular fluid/total body fluid (ECF/TBF), and extracellular water/total body water (ECW/TBW) through bioimpedance analysis. Outcomes were assessed before work (T0), after work (T1), and 60 minutes after intervention (T2). We included 39 healthy volunteers, aged 30.03±7.56 years. All four groups had significantly increased leg pain after work (T0-1) but improved 60 minutes after intervention (T1-2), particularly group C (decreased VAS by 1.9). When leg swelling was compared at T0 and T1, groups A and C showed significant increases in leg volume and circumference, indicating significant work-induced edema, whereas groups B and D showed no change or even a decrease. After interventions, leg volume and circumference significantly decreased in groups A and C, although groups B and C did not show significant improvement. The ECF/TBF and ECW/TBW of all groups decreased after interventions. Leg pain and edema after prolonged standing in healthy adults were safely and effectively improved by IPC. Although MCS also reduced leg edema immediately after work, it did not show significant improvement in leg pain at T0-1–and T1-2, nor in swelling at T1-2.

Background: To date, FM using middle ear packing has rarely reported. In this study, we hypothesized that middle ear packing with dexamethasone soaked gelfoam and fibrin glue over the fat graft could promote the success rate of TMP closure regardless of perforation size. Methods: Between January 2005 and July 2020, a total of 209 patients who underwent fat myringoplasty due to chronic TMP at tertiary referral center were encountered and analyzed. The success rate and audiologic outcome was analyzed. Results: The mean successful TM closure rate was 88.0 %. The success rate by different age generation was not significant difference. The size of the perforation grade showed no significant difference. The perforation site by anterior or posterior was not significant. The preoperative mean threshold of AC, BC and ABG were 55.71, 12.98 and 42.73 dB respectively. The postoperative mean threshold of AC, BC and ABG were 23.67, 12.98 and 10.69 dB. The change of preoperative and postoperative hearing showed statistically significant. Conclusion: From our results, the simple trimming of the perforation edge and middle ear packing with external ear canal packing using fibrin glue induced the stable adhesion between the remnant TM and the fat graft.

This paper examines the moral community thesis in the secular context of China. Using multilevel logistic regression, we test (1) whether both individual- (measured by affiliation with institutional religion) and aggregate-level religiosity (measured by the number of religious sites per 10,000 people in province) are inversely related to law and rule violations at the individual level and (2) whether the province-level religiosity enhances the inverse relationship between individual religiosity and the deviant behaviors. Results from analyzing data from the 2010 China General Social Survey and the Spatial Explorer of Religions show that both individual- and aggregate-level religiosity are inversely related to the odds of violating the law and various rules of government, transportation, workplace, and other organizations. However, the cross-level interactions are not significant across models, indicating that the contextual religiosity does not increase the effect of individual-level religiosity on deviance. Implications of findings for the moral community thesis are discussed.

Kim(2015) introduced the degenerate Cauchy numbers of the second kind and gave some identities of them. In this paper, by using the modified polyexponential functions which are introduced by Kim-Kim(2019), we define the degenerate poly-Cauchy polynomials of the second kind and investigate some properties of them. Furthermore, we consider the degenerate unipoly-Cauchy polynomials of the second kind and discuss some properties of them.

Various therapeutic approaches have been developed for neglect. Many studies have demonstrated the effect of Digital therapeutics(DTx) on neglect. By contrast, only a few studies have reported on the effects of DTx on egocentric and allocentric neglect. In this article, seven studies on DTx of egocentric and allocentric neglect were reviewed. DTx, which was employed in these studies, could be classified as follows: 1) software adaptation in traditional treatment, 2) VR game using the head-mount display as treatment, and 3) development of new digital program like ReMoVES. In addition, more studies and effective results were reported on egocentric neglect than allocentric neglect. In future studies, each effect on egocentric and allocentric neglect should be identified in detail through the appropriate use of differential evaluation and long-term application of independent digital therapeutics.

Background: Little information exists regarding the differences in the clinical and laboratory characteristics of Kikuchi-Fujimoto disease (KFD) according to age. Objective: To evaluate the clinical and laboratory characteristics of KFD according to age. Methods: We retrospectively evaluated patients diagnosed with KFD at Pusan National University Hospital between 2010 and 2020. Results: Eighty patients (46 children and 34 adults) with a mean age of 21.5 ± 11.8 years (range, 3–49 years) were included in the study. Among children, the male sex ratio was higher, in adults, the female sex ratio was higher. Fever, tenderness in the lymph node, and skin rashes were more common in children, while myalgia and weight loss were more common in adults. In children, the recurrence rate was significantly higher among boys than among girls (15.8% vs 0.0%, P=0.001). EBV and ANA positivity rates were higher in boys than in girls. In adults, the recurrence rate was significantly higher in women than in men (18.2% vs 0.0%, P=0.005). ANA positivity rates were higher in women than in men. Conclusion: The clinical features, laboratory findings, and recurrence of KFD may differ depending on age and sex. Clinicians should be aware of this.

Autoimmune limbic encephalitis (LE) is a rare, but devastating complication of allogeneic hem-atopoietic stem cell transplantation (HSCT). There is currently limited evidence describing the risk factors, laboratory features, and underlying mechanisms of this neurologic adverse event. We retrospectively reviewed available clinical, imaging, and laboratory data from adult patients with hematological malignancies who underwent haploidentical HSCT with cyclophosphamide (PTCy) at Chungnam National University Hospital from June 2016 to May 2020. Patients who developed LE were compared to those who did not based on clinical assessment, serum inflam-matory biomarkers, and reconstitution of various T cell populations. Of 35 patients, four devel-oped LE. There were no differences in patient demographics, donor demographics, or treatment conditions between patients that did and did not develop LE. Overall, patients with LE had worse clinical outcomes and overall survival than those without. In addition, they tended to have higher markers of systemic inflammation in the early post-transplant period, including fever, C-reactive protein (CRP), and cytokines. Remarkably, baseline interleukin-6 levels before HSCT were found to be higher in patients who developed LE than those who did not. In addition, analysis of T cell subsets showed impaired expansion of CD25+FOXP3+ regulatory T (Treg) cells in LE compared to non-LE patients despite appropriate reconstitution of the total CD4+ T cell population. Patients that developed LE within the first 30 days of HSCT were likely to have high serum IL-6 among other inflammatory cytokines coupled with suppression of regulatory T cell differentiation. Further work is needed on the mechanisms underlying impaired Treg expansion following HSCT and potential therapies.

In this paper, we study a generalised CIR process with externally-exciting and self-exciting jumps, and focus on the distributional properties and applications of this process and its aggregated process. The first and second moments of this jump-diffusion process are used to calculate the insurance premium based on mean-variance principle. The Laplace transform of the aggregated process is derived, and this leads to an application for pricing default-free bonds which could capture the impacts of both exogenous and endogenous shocks. Illustrative numerical examples and comparisons with other models are also provided.

Background: In long-term care facilities, there are many residents who do not have the ability to seek shelter by themselves in the case of an emergency. Thus, it is extremely important that the staff of nursing homes are equipped with correct disaster prevention concepts, emergency survival responses, and hazard mitigation measures. Purpose: Discuss the intervention effectiveness of different fire prevention and emergency response trainings at nursing homes and the relationship and predictivity of awareness to self-efficacy. Method: Recruit staff from two nursing homes through purposive sampling, using a two-team pre-and post-test design to collect results from 41 individuals in the experiment group and 40 individuals in the control group. The research tool is the “Nursing Home Fire Prevention and Emergency Response Awareness and Self-Efficacy Scale,” to compare the effectiveness of advanced and general fire safety trainings. Result: After receiving improved advanced fire safety training, the total score and the result of the experiment group on fire prevention and emergency response awareness and self-efficacy had both performed better than the control group who received general fire safety training (p < .001); fire prevention and emergency response awareness has significant and positive correlation with self-efficacy (r=.601, p < .001), and awareness is a significant predictor variable to self-efficacy (p < .001). Conclusion/Practical Application: This study finds that the key to improving learning effectiveness includes adding fire science concept chapter when creating fire safety training material in order to strengthen basic awareness; fire safety training should comprehensively introduce all related duty responsibilities of staff fire defense formation, in turn enabling mutual responsive support for the needs of the site; also, to become familiarized with the knowledge requires appropriate frequency of training and enhancing the staff’s awareness to fire prevention and emergency response, which is the most important key of learning effectiveness.

This paper presents a bibliometric analysis of highly cited papers published in the journal Sustainability between 2009 and 2023. The aim is to identify influential countries, authors, and papers, as well as patterns in authorship and citation trends. The analysis focuses on frequently cited sources, the most cited research papers and references within the journal, and trends in author keywords. The analysis shows that Sustainability is a leading publication in sustainability research, with an annual growth rate of 53.57%. The selected papers, published between 2013 and 2022, have an average age of 2.11 years and an average of 88.12 citations each. The study highlights the most influential countries in sustainability research published in Sustainability, with China leading, followed by the United States and Germany. The most prolific authors are from China, Spain, and Italy. Interdisciplinary collaboration is essential to address complex sustainability challenges, as shown in the papers published in Sustainability. The study emphasizes the importance of staying informed about emerging trends and research directions in the field of sustainability published in this journal Sustainability. It underscores the significance of fostering international collaborations and partnerships to address complex sustainability challenges facing our world today, as evidenced by the papers published in Sustainability. Overall, this bibliometric analysis provides valuable insights into the current state of sustainability research published in Sustainability and its implications for policy and practice. It highlights key areas for future research and underscores the need for interdisciplinary collaboration to address complex sustainability challenges, as demonstrated by the papers published in Sustainability. These findings have important implications for policymakers, researchers, and practitioners interested in promoting sustainable development in the field of sustainability., as published in Sustainability.

With the increasing prominence of renewable energy sources providing flexibility to the power grid, there is a growing recognition of the need to expand virtual Energy Storage Systems (ESS) to replace traditional ESS, which faces challenges in terms of supply and scalability. Grid-connected microgrids can supply power stably and are being built, so they can be used as virtual ESS to provide flexibility to the power system. This study proposes an approach to determine the optimal Power Conversion System (PCS) and battery capacity for a Virtual Energy Storage System(VEES) based on a grid-connected microgrid incorporating Photovoltaic (PV) and ESS. In this paper, it is assumed that microgrids can provide flexibility to the grid by participating in the energy trading market, there are corresponding profits and penalties for order. Numerical examples are performed to demonstrate the effectiveness of the proposed method.

The purpose of this study was to identify subgroups of quality of life (QOL) changes in breast cancer survivors (BCS) and to determine factors associated with subgroups of consistently low or deteriorated QOL. We enrolled 101 women recently diagnosed with breast cancer in South Korea and asked them to complete a questionnaire at baseline (within 1 month of diagnosis), 1 year later (Year 1), 2 years later (Year 2), and 3 years later (Year 3). We assessed QOL using the global QOL subscale from the EORTC QLQ-C30. We defined low QOL as a global QOL score 10 points below the mean score of the general population. Based on low QOL as defined in this study, we identified subgroups of QOL changes over 3 years. We identified four subgroups of QOL changes: improved (47.4%), stable (30%), continuously low (8.8%), and deteriorated (13.8%) and considered the last two categories (22.6%) as poor QOL. Logistic regression analyses demonstrated that significant determinants of poor QOL were insomnia at Year 1, fatigue and anxiety at Year 2, and fatigue, depression, and comorbidity at Year 3. In conclusion, persistent symptoms of insomnia, fatigue, anxiety, depression, and comorbidity are potential risk factors for poor QOL in BCS.

Considering the isotropic release process of nanoelectromechanical systems (NEMS), defining the active region of NEM memory switches is one of the most challenging process technologies for the implementation of monolithic-three-dimensional (M3D) CMOS-NEM hybrid circuits. In this paper, we propose a novel encapsulation method of NEM memory switches. It uses alumina (Al2O3) passivation layers which are fully compatible with CMOS baseline process. The Al2O3 bottom passivation layer can protect intermetal dielectric (IMD) and metal interconnection layers from vapor hydrogen fluoride (HF) etch process. Thus, the controllable formation of the cavity for the mechanical movement of NEM memory switches can be achieved without causing any damage to CMOS baseline circuits as well as metal interconnection lines. As a result, NEM memory switches can be located in any places and metal layers of an M3D CMOS-NEM hybrid chip, which makes circuit design easier and more volume-efficient. The feasibility of our proposed method is verified based on experimental results.

The semi-enclosed estuary is very susceptible to changes in the physical and environmental characteristics of the inflow from the land and the coastal sea weather and so the continuous and comprehensive monitoring is necessary for managing the estuary. Nevertheless, the standard procedure or schematic framework has not been proposed appropriately to determine how many instruments are necessary and where they need to be deployed to detect critical changes. Therefore, the present work proposes a systematical strategy for the deployments of the monitoring array by using the combination of the graphical optimization with the objective mapping technique. In order to reflect the spatiotemporal characteristics of the bay, the representative variables and eigenvectors are determined by the Empirical Orthogonal Function (EOF), and the cosine angle among them are calculated for a design index of optimization. At the recommended locations, the sampled representative variables are interpolated to reconstruct their spatiotemporal distribution and compared with the distributions of the true values. Analysis confirms that the selected locations, even with a small number of points, can be used for on-site monitoring. Also, the present framework suggests how to determine installable regions for real-time monitoring stations, which reflect the global and local characteristics of the semi-enclosed estuary.

The runtime environment is an important concern for self-adaptive systems (SASs). Although researchers have proposed many approaches for developing SASs that address the issue of uncertain runtime environments, the understanding of these environments varies depending on the objectives, perspectives, and assumptions of the research. Thus, the current understanding of the environment in SAS development is ambiguous and abstract. To make this understanding more concrete, we describe the landscape in this area through a systematic literature review (SLR). We examined 128 primary studies and 14 unique environment models. We investigated concepts of the environment depicted in the primary studies and the proposed environment models based on their ability to aid in understanding. This illustrates the characteristics of the SAS environment, the associated emerging environmental uncertainties, and what is expressed in the existing environment models. This paper makes explicit the implicit understanding about the environment made by the SAS research community and organizes and visualizes them.

Reducing sedentary behaviours can help prevent non-communicable diseases, particularly among young adolescents with long term illnesses or disabilities (LTID). Much of young people’s voluntary sedentary time is related to screen-time behaviours (STBs) such as TV viewing, playing computer games, and using the computer for other activities. Although public health data on adolescents’ STB is growing, information about adolescents with LTID is currently lacking in a European context. The purpose of this study is to compare time on STBs between adolescents with and without LTID in European Countries through the HBSC 2013/14 study. Young adolescents (n = 61,329; boys 47.8%) from 15 European countries reported the time spent on TV viewing, playing computer games, and using the computer for other purposes on weekdays and the weekend. STBs were dichotomised based on international recommendations of less than 2 h per day, and Chi-square tests of independence were performed to investigate differences. STB time was combined to produce a sum score as dependent variable in multiple analysis of covariance with age and family affluence as covariates. There were statistically significant differences in computer gaming among boys and other computer use among girls for both weekdays and weekends, whereby adolescents with LTID reported higher use. In addition, both boys and girls with LTID spent more time on STBs than their same sex peers without LTID (Boys, F = 28.17, p < 0.001; Girls, F = 9.60, p = 0.002). The results of this study indicate a need for preventive strategies to address high levels of STB among young adolescents with LTID and reduce the risk of poor health outcomes associated with higher levels of sedentary behaviour.

In this paper, a 100CMM regenerative thermal oxidizer (RTO) system based on a high heating device for low-emission combustion is implemented at a volatile organic compound (VOCs) gas generation workplace. Existing RTO has a structure that repeats the inflow and discharge of VOCs gas into a cylindrical drum-type rotating disk and has excellent energy efficiency with a heat recovery rate of 95% or more. However, when used for a long time, there is a problem that rotation stops or explodes due to the discharge of pollutants due to dust and thermal expansion due to high temperature of 800℃. To overcome this, a RTO based on a high heating device was developed to reduce low-emission combustion emissions and energy use. Through 177 hours of demonstration time, the oxidation efficiency of VOCs was 97.87%; the waste heat recovery rate was reduced by 95.78%, the fuel consumption was reduced by 21.95%, and the nitrogen oxide concentration was 3.9 ppm

To address the challenges of climate change and food security, the establishment of smart farm complexes is necessary. While there have been numerous studies on the productivity and environmental control of individual greenhouses, research on greenhouse complexes is considerably limited. Conducting environmental studies during the design phase of these complexes poses financial constraints and practical limitations in terms of on-site experiments. To identify potential issues that may arise when developing large-scale greenhouse complexes, it is possible to utilize modeling techniques using Computational Fluid Dynamics (CFD) to assess environmental concerns and location issues before constructing the facilities. Consequently, simulating large-scale CFD models that incorporate multiple greenhouses and atmospheric conditions simultaneously presents significant numerical challenges. The objective of this study was to develop a guideline for verifying CFD models for a large-scale Venlo greenhouse, where acquiring field data before construction is not feasible for designing a greenhouse complex. The verification processes of the CFD models were conducted using 2D and 3D iterative simulations of a 2-hectare greenhouse model, using the improved Grid Independence Test (GIT) and wall Y+ approaches. Subsequently, the aerodynamic characteristics were analyzed in a 3D greenhouse model to access its performance when the wind direction was 90° in summer season. The findings revealed that a grid resolution of 0.8 meters and a first layer height of 0.04 meters were suitable for developing large-scale greenhouse models, resulting in a low Root Mean Square Error (RMSE) of 3.9% and a high coefficient of determination (R2) of 0.968. This process led to a significant reduction of 38% in the number of grid cells. These results will serve as design standards for large-scale greenhouses.

Graphene materials synthesized using direct laser writing (laser-induced graphene; LIG) are fa-vorable sensor materials because of their large surface area, ease of fabrication, and cost effec-tiveness. In particular, LIG decorated with metal nanoparticles (NPs) has been used in various sensors, including chemical sensors and electronic and electrochemical biosensors. However, the effect of metal decoration on LIG sensors remains controversial; hypotheses based on computa-tional simulations do not always match experimental results, and even experimental results re-ported by different researchers have not been consistent. In the present study, we explored the effects of metal decorations on LIG gas sensors, with NO2 and NH3 gases as representative oxi-dizing and reducing agents, respectively. To eliminate unwanted side effects arising from metal salt residues, metal NPs were directly deposited by vacuum evaporation. Although the gas sen-sitivities of the sensors deteriorate upon metal decoration irrespective of the metal work function in the case of NO2 gas, they improve upon metal decoration in the case of NH3 exposure. A careful investigation of the chemical structure and morphology of the metal NPs in the LIG sensors shows that the spontaneous oxidation of metal NPs with a low work function changes the be-havior of the LIG gas sensors and that the sensor behaviors under NO2 and NH3 gases follow different principles.

Evans' Syndrome (ES) is a rare autoimmune disorder characterized by the simultaneous occurrence of immune thrombocytopenia (ITP) and autoimmune hemolytic anemia (AIHA). Thrombotic complications in ES patients are uncommon, particularly involving Buerger's Disease (BD). We report a case of a 49-year-old male with ES and a history of diabetes and heavy smoking, presenting with a necrotic wound on his right great toe. Diagnostic evaluations revealed severe stenosis and thrombosis in the lower limb arteries, diagnosed as BD. The patient underwent successful popliteal-tibioperoneal artery bypass surgery and subsequent disarticulation and revision of the distal phalanx, followed by the application of an acellular dermal matrix (ADM) to promote healing. Post-surgery, the patient showed significant improvement in blood flow and complete epithelialization without complications. This case highlights the importance of a multidisciplinary approach in managing complex wounds in ES patients, suggesting potential treatment pathways for future cases involving BD

Coastal areas are increasingly being damaged with the expansion of seawater intrusion areas. We suggest a three-step method for reducing seawater intrusion areas by predicting future damage to groundwater being used continuously. First, the area most vulnerable to seawater intrusion damage is selected from among 25 areas on the west coast of the Republic of Korea. Having identified the Taean area as the region in question in the second step, we use RCP 4.5 and 8.5 as future sea level rise scenarios and predict the future usage of groundwater using linear-regression analysis of data for the past 10 years. Consequently, for RCP 8.5 (groundwater-usage scenario 1.0), 68.5% of the total Taean area is projected to be influenced by seawater intrusion. In the third step, the effectiveness of seawater intrusion reduction measures is analyzed considering the projected future situation and the local characteristics of the Taean area. After considering the effects of alternative locations, as well as seawater intrusion related data, alternatives were prioritized using a multi-criteria decision-making method. Consequently, 3, 5, and 4 were prioritized in the listed order, and we judged that by applying seawater intrusion area reduction measures according to this result, we will achieve the biggest effect.

This study reports the preparation of silica and nano-fructosome encapsulated Candida antarctica lipase B particles (CalB@NF@SiO2) and demonstration of their enzymatic hydrolysis and acylation. CalB@NF@SiO2 particles were prepared as a function of TEOS concentration (3-100 mM). Their mean particle size was 185 nm by TEM. Enzymatic hydrolysis was performed to compare catalytic efficiencies of CalB@NF and CalB@NF@SiO2. Catalytic constants (Km, Vmax, and Kcat) of CalB@NF and CalB@NF@SiO2 were calculated with Michaelis-Menten equation and Line-weaver Burk plot. Optimal stability of CalB@NF@SiO2 was found at pH 8 and temperature of 35 ℃. Moreover, CalB@NF@SiO2 particles were reused for seven cycles to evaluate their reusability. In addition, enzymatic synthesis of benzyl benzoate was demonstrated by an acylation reaction with benzoic anhydride. The efficiency of CalB@NF@SiO2 for converting benzoic anhydride to benzyl benzoate by the acylation reaction was 97%, indicating that benzoic anhydride was almost completely converted to benzyl benzoate. Consequently, CalB@NF@SiO2 particles are better than CalB@NF particles for enzymatic synthesis. In addition, they are reusable with high stability at optimal pH and temperature.

The purpose of this study was to detect mind-wandering experienced by pre-service teachers while learning video lecture on physics. The lecture was videotaped and consisted of a live lecture in a classroom. The lecture was about Gauss's law on physics. We investigated whether oculomotor data and eye movements could be used as a marker to indicate the learner’s mind-wandering. Each data was collected in a study in which 24 pre-service teachers (16 females and 8 males) reported self-caught mind-wandering while learning physics video lecture during30 minutes. A Tobii Pro Spectrum (sampling rate: 300Hz) was used to capture their eye-gaze during learning Gauss's law course video. After watching video lecture, we interviewed pre-service teachers about their mind-wandering experience. We first used the self-caught method to capture the mind-wandering timing of pre-service teachers while learning from video lectures. We detected more accurate mind-wandering segments by comparing fixation duration and saccade count. We investigated two types of oculomotor data (blink count, pupil size) and nine eye movements (average peak velocity of saccades; maximum peak velocity of saccades; standard deviation of peak velocity of saccades; average amplitude of saccades; maximum amplitude of saccades; total amplitude of saccades; saccade count/s; fixation duration; fixation dispersion). The result was that the blink count could not be used as a marker for mind-wandering during learning video lectures among them (oculomotor data and eye movements), unlike previous literatures. Based on the results of this study, we identified elements that can be used as mind-wandering markers while learning from video lectures that are similar to real classes, among the oculomotor data and eye movement mentioned in previous literatures. Also, we found that most participants focused on past thoughts and felt unpleasant after experiencing mind-wandering through interview analysis.

This study focused on the development and implementation of an educational simulation program based on Korean Triage and Acuity Scale (KTAS) for nurses in emergency medical centers who completed KTAS training. We also examined its educational effects based on the evaluation of clinical decision-making ability, job satisfaction, and customer orientation. The study participants were 30 nurses in the emergency medical center of a general hospital. Data were collected from May 3 to 24, 2017, and analyzed using SPSS 22.0. There was a significant difference in the mean scores in clinical decision-making ability, job satisfaction, and customer orientation before and after simulation education. In other words, emergency nurses who received KTAS-based simulation education program improved their clinical decision making ability, job satisfaction, and customer orientation. Based on the results of this study, it is expected that it can be used for KTAS education, and it was found that simulation-based education is a useful learning method for triage nurses in emergency medical center.

Owing to their unique physicochemical properties, nanoparticles are used in a variety of ways in the field of cancer treatment, including imaging, drug delivery, and photothermal and photodynamic therapies. The fascinating properties of nanoparticles are determined by their size, morphology, and constituent elements, and various synthetic methods and post-synthetic techniques have been applied to control these factors. Herein, we present examples of shape and composition control through galvanic replacement, a technique that exploits redox potential differences between elements to induce spontaneous ion-exchange and highlight its specific contributions to cancer treatment applications. The present article identifies the recent advances in nanoparticle formation techniques and discusses the future outlook of the field.

As most Korean OTT subscribers use mobile devices as their primary medium for watching OTT video content, mobile network traffic is soaring. However, the existing build-out of mobile communication technology – such as deploying more base stations or expanding the network bandwidth – is struggling to keep pace with the enormous increased demands of mobile network traffic. Accordingly, wireless device-to-device (D2D) caching networks are considered one of the most reliable alternatives for reducing the overload from mobile network traffic caused by streaming video content online. However, wireless D2D caching networks have pros and cons, like any other technology. Thus, this study aims to examine the practical decision-making process of mobile OTT service users in response to the application of wireless D2D caching networks on their mobile devices. An online survey of 94 respondents was conducted in South Korea during 19–23 May 2022; the data obtained were analyzed using the analytic hierarchy process (AHP) approach. The study finds that it was the risks, rather than the situational conditions and benefits, that mostly affected mobile OTT service users’ behavioral intentions and strategies. Streaming video content using mobile data or Wi-Fi was perceived as the most viable option. Mobile OTT service users were also willing to take the leap of shifts towards downloading video content in advance rather than adopting wireless D2D caching networks on a mobile device. However, mobile OTT service users’ decisions are heavily dependent on situational conditions related to use of mobile OTT services that make the quality of service consumption different. As one of the first to examine the responses of mobile OTT service users, this study provides meaningful implications for a timely and sensitive issue.

The main purpose of this paper is to evaluate electrical treeing degradation for cable insulation. To effectively deal with the currently facing issues, I endeavor to find the most optimal methods by means of applying signal process. First, we made three type models of electrical tree for PD generation to show the distribution characteristics and applied voltage to acquire data by using a PD detecting system. These acquired data presented distribution and four 2D distributions. Hn(q), Hn(), Hqn(), and Hqmax() were derived from the distribution of partial discharge. From the analysis of these distributions, each PD model is proved to hold its unique characteristics and the results were then applied as basic specific qualities for insulation conditions. In order to recognize the progresses of an electrical tree, we proposed methods using scale parameter by means of Weibull distribution. We measured the time of tree propagation for 16 specimens of each model from initiation stage, middle stage, and breakdown respectively, using these breakdown data, we estimated the shape parameter, scale parameter and MTTF(Mean Time To Failure). The results of this study recognize the sources of PD by applying acquired data from PD signals to pre-acquired data. If the cause of PD is degradation, in other words, electrical tree, we can determine the replacement time of devices at the initiation stage of tree growth progress or no later than the middle stage and use it as a basic methods analysis diagnosis system. That is, pattern recognition and Weibull distribution can be employed to get the reliability of diagnosis.

Slot-die coatings are advantageous when used for coating large-area flexible devices; in particular, the coating width can be controlled, and simultaneous multi-layer coatings can be processed. Till date, the effects of ink widening and coating gap on the coating thickness have only been considered in a few studies. To this end, we developed two mathematical models to accurately estimate the coating width and thickness considering these two effects. We used root mean square deviation (RMSD) to experimentally verify the developed method. The coating width was seen to increase and the coating thickness was seen to decrease when the coating gap was increased. Experimental results showed that the estimation performances of the coating width and thickness models were as high as 98.46 % and 95.8 %, respectively. We believe that the developed models can be useful for determining the coating conditions according to the ink properties to coat a functional layer with user-defined widths and thicknesses in both lab- and industrial-scale roll-to-roll slot-die coating processes.

Recently, there has been considerable research on deepfake detection. However, most existing methods face challenges in adapting to the advancements in new generative models within unknown domains. In addition, the emergence of new generative models capable of producing and editing high-quality images, such as Diffusion, Consistency, and LCM, poses a challenge for traditional deepfake training models. These advancements highlight the need for adapting and evolving existing deepfake detection techniques to effectively counter the threats posed by sophisticated image manipulation technologies. In this paper, our objective is to detect deepfake videos in unknown domains using unlabeled data. Specifically, our proposed approach employs Meta Pseudo Labels (MPL) with Supervised Contrastive Learning, so-called SupCon-MPL, allowing the model to be trained on unlabeled images. MPL involves the simultaneous training of both a Teacher model and a Student model, where the Teacher model generates Pseudo Labels utilized to train the Student model. This method aims to enhance the adaptability and robustness of deepfake detection systems against emerging unknown domains. Supervised Contrastive Learning utilizes labels to compare samples within similar classes more intensively, while encouraging greater distinction from samples in dissimilar classes. This facilitates the learning of features in a diverse set of deepfake images by the model, consequently contributing to the performance of deepfake detection in unknown domains. When utilizing the ResNet50 model as the backbone, SupCon-MPL exhibited an improvement of 1.58% in accuracy compared to traditional MPL in known domain detection. Moreover, in the same generation of unknown domain detection, there was a 1.32% accuracy enhancement, while in the detection of post-generation unknown domains, there was an 8.74% increase in accuracy.

This research deals with risk assessment for human life, man-made infrastructure, and agriculture in a landslide-prone area using GIS-based spatial methods. The study area landslide inventory map was prepared based on previous landslide information, aerial photograph analysis, and several field observations. A total of 550 landslides have been included with 182 debris flow and 368 soil slides. All included landslides were classified into two groups by random selection; half were used for model calibration and the rest were used for cross-validation. In the analysis, fourteen causative factors were vastly used, such as aspect, slope, curvature, elevation, topographic wetness index, forest timber diameter, forest type, forest crown density, forest age, land-use, geology, soil drainage, soil depth, and soil texture. Moreover, to identify the interaction between occurred landslides and causative factors, the affected pixels were divided into different sub-classes using a frequency ratio method. Based on the total dataset, three landslide susceptibility maps were constructed using Bayesian prediction, likelihood ratio, and fuzzy set method. By evaluating cross-validation and success rate curve, model susceptibility results were plotted with a receiver operating characteristic (ROC) curve and the area under the curve (AUC) was estimated. In addition, for risk assessment, each social data layer such as agriculture, house, industry, business, road, river, population intensity, monetary value, and vulnerability level was added based on the local standard and incident time and was converted into US dollars. During the analysis, each method hazard map was used with a specific group of thematic data layers. Subsequently, for preparing the probability table, study area total pixels and predictive landslide affected pixels were considered. Matching with the affected pixels, a standard of 5000 pixels was selected to run the final evaluation. Based on the results, the agricultural field showed the highest vulnerability and estimated risk of US $ 16.3 million. Further, the man-made infrastructure map showed a risk of US $ 31.3 million. The total estimated population casualties were 6.77, which was relatively similar to the published data.

Resistive random-access memory has emerged as a promising non-volatile memory technology, garnering substantial attention due to its potential for high operational performance, low power consumption, and scalability. Two-dimensional nanostructured materials play a pivotal role in RRAM devices, offering enhanced electrical properties and physical attributes that contribute to overall device improvement. In this study, self-rectifying switching behavior in RRAM devices is proposed based on molybdenum disulfide nanocomposites decorated with palladium on SiO2/Si substrates. The integration of Pd and MoS2 at the nanoscale effectively mitigates leakage currents decreasing from cross-talk in the RRAM array, eliminating the need for a separate selector device. The successful demonstration of the expected RRAM switching behavior follows the application of a Pd nanoparticle coating. The fabricated Pd-MoS2 synaptic device showed a high current ratio for forward/reverse current higher than 60 at a low resistance state and observed a memory on/off ratio of 103 performing stable resistance switching behavior.

One of the most serious concerns about mega event-related changes to small cities is how to effectively utilize newly developed public attractions after the Olympic Games. Making connections with existing local amenities and forming attraction networks can be effective strategies for continuing a city’s revitalization. However, despite the expected benefits, attraction network research shows that these benefits often fail to materialize. With the case of Gangneung, a 2018 winter Olympic hosting city, this study investigated visitation patterns to nineteen selected attractions using network analysis. The results indicate that the most influential nodes are located on the northern coast, the eastern coast, and in the south downtown area, those nodes being the central locations where the strongest of connections are made. New attractions such as the Olympic Park and Walwha Linear Park were rather isolated. While seasonal and periodic variations, visitors’ residences, and destination choice attitudes had a significant effect on visitation patterns, the attraction networks, modes of transportation, proximity to region, and type similarity were not significant factors in the forming of visitation patterns. The results make a methodological contribution to tourist behavior and network research. In addition, beyond individual attraction development, the results provide practical implications in regard to networking and cooperation between multiple attractions using temporal and spatial strategies such as management/investment prioritizing, travel route development, and program scheduling.

Polypyrrole (PPy)-capped caped silver nanowire (Ag NW) nanomaterials (core–shell rod-shaped Ag NW@PPy) were synthesized suing a one–port suspension polymerization technique. The thickness of PPy layer on the 50-nm-thickness/15-μm-length Ag NW was effectively controlled to 10, 40, 50, and 60 nm. Thin films cast from one-dimensional conductive Ag NW@PPy formed a three-dimensional (3-D) conductive porous network structure and provided excellent electrochemical performance. The 3-D Ag NW@PPy network can significantly reduce the internal resistance of the electrode and maintain structural stability. As a result, a high specific capacitance of 625 F/g at a scan rate of 1 mV/s was obtained from the 3-D porous Ag NW@PPy composite film. The cycling performance over a long period exceeding 10,000 cycles was also evaluated. We expect that our core–shell-structured Ag NW@PPy composites and their 3-D porous structure network films can be applied as electrochemical materials for the design and manufacture of supercapacitors and other energy storage devices.

Abstract: (1) Background: existing treatment methods for neglect are concentrated on egocentric neglect and lead to various problems, such as cost/space constraints and portability. Therefore, this study seeks to determine how treatment (a.k.a., Twins Therapy, TT) can improve an existing problem in relation to neglect in stroke patients; (2) Method: The research design was a pre-post test control group design and both groups maintained existing rehabilitation treatment and added TT intervention only to the experimental group. TT intervention was conducted for a total of 20 sessions (1 session 30 min/day, 5 days/week for 4 weeks); (3) Result: as a result of comparison be-fore and after the TT intervention, there was no significant difference in MFT and MBI items (p>.05). However, the score and execution time of the Apple Cancellation Test showed significant reduction only in the experimental group (p<.05); (4) Conclusion: as a result of the study, TT im-proved not only egocentric neglect, but also allocentric neglect symptoms in stroke patients

Perfluorinated compounds (PFCs) are used in the manufacturing process of the semiconductor and display industries, and the need for emission reduction is growing as a greenhouse gas with a very large global warming potential. The decomposition characteristics of etch type and water film (WF) type plasma-wet scrubbers were investigated. The PFCs used in the study were CF4, SF6, NF3, CHF3, C2F6, C3F8, and C4F8, and the destruction removal efficiency (DRE) and by-product gas generation rate according to the changes in the parameters (total flow rate and power) of the plasma-wet scrubber were confirmed. When the total flow rate was 100 L/min and the measured maximum power (11 kW), the reduction efficiency of CF4 in the etch type was 95.60 % and the DRE of other PFCs was 99.99 %. And, in the WF type, the DRE of CF4 was 90.06 %, that of SF6 was 96.44 %, and that of other PFCs was 99.99 %. When the total flow rate was 300 L/min and 11 kW, the DRE of SF6 in the etch type was 99 %, and the DRE of NF3, CHF3, C2F6, C3F8, and C4F8 were 99.80 %, 95.34 %, 85.38 %, 88.49 %, and 98.22 %, respectively. And, in the WF type, the DRE of SF6 was 94.39 %, and the DRE of NF3, CHF3, C2F6, C3F8, and C4F8 were 99.80 %, 95.34 %, 85.38 %, 88.49 %, and 98.22 %, respectively. The by-product gas generation rate was significantly lower in the WF type.

Abstract: Global ecological concern regarding the transfer of fouling organisms to ship hulls is increasing. This study investigated the species composition, dominant species, distribution patterns, community structure, and life-cycle differences of hull-fouling macroinvertebrates on five research vessels (R/Vs: Isabu, Onnuri, Eardo, Jangmok 1, and Jangmok 2) operated by the Korea Institute of Ocean Science and Technology (KIOST). Hull-fouling macroinvertebrates were collected three to five times on quadrats from the upper and middle sectors of the hull sides, bottom, and niche areas (the propellers and shafts and the thrusters). A total of 47 macroinvertebrate species were identified, represented by 8,519 individuals(ind.)/m2 and a biomass of 1,967 gWWt/m2 on the five vessels. The number of species, density, and biomass were greater on the coastal vessels the Eardo, Jangmok 1, and Jangmok 2 than on the ocean-going vessels the Isabu and Onnuri. Among the coastal vessels, barnacles were the most abundant and had the greatest density, while mollusks had the highest biomass. Differences between hull sectors showed that the highest species abundance and density appeared on all hulls in ports and bays where the Jangmok 1 operated, while the highest species abundance, density, and biomass were identified in the niche areas of the Eardo, which operated farther from the coast. The hull-fouling macroinvertebrates that exceeded 1% of all organisms were the barnacles Amphibalanus amphitrite, Balanus trigonus, and Amphibalanus improvisus; the polychaete Hydroides ezoensis; the bivalves Magallana gigas and Mytilus galloprovincialis; and the amphipod Jassa slatteryi. The dominant species were cosmopolitan and globally distributed, and many of them were cryptogenic. Six native species were identified: M. gigas, H. ezoensis, the amphipod Melita koreana, the isopod Cirolana ko-reana, and the barnacle B. trigonus and F. kondakovi. Eight non-indigenous species (NIS) were de-tected: barnacles A. amphitrite and A. improvisus, the bivalve M. galloprovincialis, the polychaete Perinereis nuntia, amphipods J. slatteryi and Caprella californica, and bryozoans Bugulina californica and Bugula neritina. Of the fouling macroinvertebrates found on the vessel hulls, 13% were native and 17% were NIS. The nMDS ordination analysis of the five vessels showed four clusters of fouling macroinvertebrate communities: two ocean clusters (the Isabu and Onnuri), one coastal cluster (the Eardo and Jangmok 2), and one local cluster (the Jangmok 1). More diverse communities developed on the hulls of vessels that operated locally rather than globally or in deep oceans. Spearman rank correlation showed that biological indices such as number of species, density, and biomass correlated highly and positively with the numbers of days on coastal operations and negatively with the number days on ocean operations. The species diversity index correlated positively with the total number of anchoring days and coastal operation days and negatively with the total number of operation days and ocean operation days. The macroinvertebrates differed by the area of operation, the port of anchorage, the number of days in operation and at anchor, and the hull sectors. There is no previous research data on hull-fouling macroinvertebrates in the Republic of Korea, and this study provides a basis for future studies to identify introduced species and their differences based on operation area.

This study examined if people who reside in different regions of South Korea exhibit different WTP for the mitigation of PM2.5 emissions from coal power plants by restricting the operation of such plants during the winter and spring when air pollution becomes severe. A contingent valuation method combined with a double bounded dichotomous choice was used to derive people’s WTP for the mitigation of PM2.5 emissions. Sample group was divided into central, western, eastern, and southern regions. It is known that the eastern region is affected by northwesterly winds in the winter and spring seasons, so air pollutants in the eastern areas fly to the eastern sea. According to the estimation results, respondents who live in eastern regions showed significantly lower WTP than the average WTP. We suggest that the mitigation policy on PM2.5 emissions should consider regional differences in the contributions of coal power plants to PM2.5 emissions.

Octacalcium phosphate (OCP) is a precursor of biological apatite crystals that has attracted attention as a possible bone substitute. On the other hand, few studies have examined this material at the experimental level due to the limitations of OCP mass production. Recently, mass production technology of OCP was developed, and the launch of OCP bone substitutes is occurring. In this study, the bone regeneration capacity of OCP products was compared with two of the most clinically used materials: heat-treated bovine bone (BHA) and sintered biphasic calcium phosphate (BCP). Twelve rabbits were used, and defects in each tibia were filled with OCP, BHA, BCP, and left unfilled as control (CON). The tibias were harvested at 4 and 12 weeks, and 15 μm slides were prepared using the diamond grinding method after being embedded in resin. Histological and histomorphometric analyses were performed to evaluate the bone regeneration ability and mechanism. The OCP showed significantly higher resorption and new bone formation in both periods analysed (p<0.05). Overall, OCP bone substitutes can enhance bone regeneration significantly by activating osteoblasts and a rapid phase transition of OCP crystals to biological apatite crystals (mineralisation), as well as providing additional space for new bone formation by rapid resorption.

Accurately predicting electrical signals of three-phase Direct Torque Control (DTC) induction motors is crucial for optimal motor performance and effective condition monitoring. However, multiple DTC motors’ complexity and operating conditions’ variations pose challenges for traditional prediction methods. To overcome these challenges, we propose an innovative approach that combines Fast Fourier Transform (FFT) to transform electrical motor simulation data and a Bi-directional Long Short-Term Memory (Bi-LSTM) network to forecast processed motor data. By transforming the DTC induction motor signals from the time domain to the frequency domain, we enhance the capability of learning models to capture subtle differences and generate various input features. The Bi-LSTM model effectively captures both forward and backward dependencies in time series data, enabling accurate prediction of electrical signals. We evaluate the proposed approach using our simulated dataset and compare the proposed method to a state-of-the-art model, the Gated Recurrent Unit (GRU), demonstrating its effectiveness in improving the accuracy and reliability of induction motor signals forecasting. The finding provides valuable insights for advancing motor control and operation in industrial applications.

A sintered wick was formed in a heat pipe through the process of sintering a mixture of copper powder with particle sizes of 100㎛ and 200㎛, mixed with a pore-forming agent. On application to the heat pipes. The thermal resistance of heat pipes containing a sintered wick was calculated for different tilting angles (0°, 45°, and 90°) according to the type of powder, thickness of the sintered wick, and the filling ratio of the working fluid. The heat transfer efficiencies were evaluated through temperature tests. The capillary force, which is closely related to heat transfer efficiency, is determined by the effective pore radius resulting from the sintering of the copper powder. Furthermore, it was observed that the heat transfer performance of the heat pipe was at its best when the working fluid filling ratio was 30%. Additionally, the width of the wick was found to have a direct correlation with the heat transfer performance.

Marine vessels operating on the Arctic Sea route are constantly prone to collisions and friction with ice. This study discusses the wear of the hull plate caused by the collision of ice against vessels operating in Arctic Sea routes. The abrasive wear of the hull due to ice impact was numerically assessed based on both the incident behavior of ice particles interacting with the flow around the hull and the wear loss of the hull surface caused by the contact force of ice particles. A multi-phase approach was adopted to account for the behavior of ice particles continuously affected by the fluid force around the hull. The fluid force acting on the ice floe was evaluated using computational fluid dynamics (CFD) and the dynamic motion of the drift ice was evaluated using the discrete element method (DEM). The motion of the floating ice particles was updated in real time by iteratively coupling the fluid force and the motion of the ice floe at each time step of the numerical simulation. The results of the wear simulation models were presented in terms of the shape change of the hull surface due to wear. At first, the wear was evaluated for cases in which only the surface paint of the hull was damaged. Thereafter, a computation model considering the shape change of the hull surface experiencing long-term friction of ice particles was introduced. Finally, the numerical procedures to predict the abrasive wear of the hull surface by ice impact were discussed.

Medical institutions, where several patients are treated and medical workers engaged, are always exposed to secondary viral and bacterial infections. It is critical to prevent infection transmission by indirect as well as direct contact through air or splash. The infections of most diseases can be transmitted through the air. HEPA filters installed in air conditioning equipment are used to prevent infection transmission through air in medical institutions, but air circulation takes a long time in a large space. Virus and bacteria smaller than 0.3 μm cannot be removed by the HEPA filter; hence, those microbes remain alive throughout the air ventilation. A plasma sterilizer has the capability to provide environmental friendly sterilization by employing reactive oxide species and reactive nitrogen species at a low cost. We developed an excellent plasma sterilizer by using a non-thermal atmospheric-pressure biocompatible plasma (NBP). Ozone concentration in plasma sources has been derived by Kuhn et al. [1]. The diffusion coefficients inside (D₀) and outside (D₁) the plasma sterilizer have been calculated to be 0.0641 m² s^-1 and 0.717 m² s^-1, respectively. To sustain high O₃ concentrations over 121 ppm inside the plasma source and low O₃ concentrations below 0.05 ppm outside the sterilizer, it is necessary to keep O₃ concentrations at the exit of plasma sterilizer below 0.28 ppm. so that diffusion coefficient D₁ has been designed to be as large as 11 times of D₀.

The continuing development of industrialization and increasing population density has led to the emergence of noise as an increasingly common problem, requiring various types of sound absorption and insulation methods to address it. Meanwhile, the recycling of resources to ensure a sustainable future for the planet and mankind is also required. Therefore, this study investigates the potential of corrugated cardboard as a resource for noise reduction. The sound absorption and insulation performance of non-perforated corrugated cardboard (NPCC) were measured, and modified corrugated boards were fabricated by drilling holes either through the surface of the corrugated board alone or through the corrugated board in its entirety. The sound absorption/insulation performance both of perforated corrugated cardboard (PCC), and perforated corrugated cardboard with multi frequency resonators (PCCM) were measured using the transfer function method and the transmission matrix method. To determine the effectiveness of NPCC, PCC, and PCCM in noise reduction, the sound pressure level was analyzed by applying it to a home blender. The results showed PCCM’s sound absorption and insulation performance to be excellent. On the basis of these findings, we propose the use of PMMC as an eco-friendly noise reduction material.

As one of GEO-constellation for environmental monitoring in the next decade, Geostationary Environment Monitoring Spectrometer (GEMS) is designed to observe the Asia Pacific region to provide the information on the atmospheric chemicals, aerosol and cloud properties. For the continuous monitoring of the sensor performance after its launch in early 2020, here we suggest deep convective clouds (DCCs) as a possible target for the vicarious calibration of GEMS, the first UV/VIS hyperspectral sensor onboard a geostationary satellite. Tropospheric Monitoring Instrument (TROPOMI) and Ozone Monitoring Instrument (OMI) are used as a proxy of GEMS, and a conventional DCC detection approach applying the thermal threshold test is used for the DCC detection based on the collocations with Advance Himawari-8 Imager (AHI) onboard Himawari-8 geostationary satellite. DCCs are frequently detected over the GEMS observation area on average over 200 pixels in a single observation scene. Considering the spatial resolution of GEMS, 3.5 km×7 km which is similar to TROPOMI, and its temporal resolution (8 times a day), availability of DCCs for vicarious calibration of GEMS is expected to be sufficient. Inspection of the DCC reflectivity spectra estimated from the OMI and TROPOMI data also shows a promising result. Even though, their observation geometry and sensor characteristics are quite a different, the estimated DCC spectra agree quite a well within a known uncertainty range with comparable spectral features. When the DCC detection is further improved by applying both visible and infrared tests, the variability of DCC reflectivity from the TROPOMI data is reduced by half, from 10% to 5%. This is mainly due to the efficient screening of cold thin cirrus with the visible test and of bright warm clouds with the infrared test. The precise DCC detection is also expected to contribute to the accurate characterization of the cloud reflectivity, which will be further investigated.

A systematic approach for model updating using the modal identification results is proposed. Modal identification provides mode shapes for physical quantities (acceleration strain, etc.) measured in specific directions at the location of the sensors. Besides, model updating involves the use of the mode shapes related to the nodal degrees-of-freedom of the finite element analytic model. Consequently, the mode shapes obtained by modal identification and the mode shapes of the model updating process do not coincide even for the same mode. Therefore, a method constructing transform matrices that distinguish the cases where measurement is done by acceleration, velocity and displacement sensors and the case where measurement is done by strain sensors is proposed to remedy such disagreement between the mode shapes. The so-constructed transform matrices are then applied when the mode shape residual is used as objective function or for mode pairing in the model updating process. The feasibility of the proposed approach is verified by means of a numerical example in which the strain or acceleration of a simple beam is measured and a numerical example in which the strain of a bridge is measured. Using the proposed approach, it is possible to model the structure regardless of the position of the sensors and to select the location of the sensors independently from the model.

Acetic acid bacteria (AAB) form a bacterial film on the surface of alcoholic solutions and ferment ethanol to acetic acid while also producing bioactive compounds. To discover functional AAB for industrial use, we isolated and selected strains from farm-produced vinegars using a CaCO3-containing medium. The seven strains belonged to Acetobacter cerevisiae and A. pasteurianus. Physiological properties were determined, including ethanol tolerance at up to 12% (v/v). Acidification at a growth temperature of 40 ℃ was seen for GHA 7, GYA 23, JGB 21-17, and GHA 20 strains, which may be useful in vinegar production where thermotolerant AAB are required. The seven AAB isolates had strong antibacterial activity against Staphylococcus aureus. Antioxidant activity was 2- and 4-fold higher, respectively, for A cerevisiae and A. pasteurianus than for the control, 1% acetic acid. We also observed 91.3% inhibition of angiotensin-converting enzyme activity for the KSO 5 strain, higher than that for the positive control, 0.1% captopril (76.9%). All strains showed complete inhibition of α-glucosidase, except JGB 21-17 and GHA 7 with 98.3% inhibition. Our work suggests usefulness of the strains selected as seed strains for highly efficient production of functional vinegar and illustrates identification of useful functional characteristics on a scientific basis.

The purpose of this study is to identify the different effects exerted by planting density and nitrogen fertilization on high-salinity Reclaimed Paddy Fields(RPF) and General Paddy Fields(GPF), and to find the amount of fertilization and the planting density suitable for the growth of forage rice in each paddy field. In both experimental locations, there was no significant change in the soil due to N treatment, but in the case of RPF, electrical conductivity(EC) decreased significantly from more than 5dS/m to up to 2.87dS/m during the yellow ripe stage due to the influence of floods and concentrated precipitation on the fields. In all soils, as both the amount of N treatment and the planting density increased, there was a proportional relationship in which the number of tillers and the dry weight also increased, with the occurrence of lodging also being increased. The dry weight, as expected, was 1.5 times higher at a planting distance of 10 cm, rather than 16 cm. In addition, in both locations N treatment led to an increase in the dry weight, but when N treatment reached 400kg/ha (2.0), the dry weight decreased instead. Moreover, although there was no clear difference in feed value according to N treatment, in RPF, neutral detergent fiber(NDF) was higher than 60%, RFV was less than 98, and TDN was also low, confirming that the quality of rice was higher in GPF.

This study presents structural analysis and optimization for the lightweight design of a buoyant rotor-type permanent magnet (BRPM) generator, which was first presented in Bang (2010), and compares its structural performances to a conventional generator with a spoke arm-type rotor and stator. The main benefit of a BRPM is that it can be realized as a bearing-less drive system, free from the mechanical failure of rotor bearings, by using a buoyant rotor. Also, the deformation of a generator by blade vibration can be effectively suppressed using joint couplings between the blades and the rotor. For the design optimization, the objective is set as the mass of the rotor and the stator, and the maximum deformation of the airgap clearance between the rotor and the stator by external forces is constrained below 10% of the gap width. The commercial software Optistruct is used for the analysis and optimization. In this investigation, the analysis and optimization are conducted for a 10 MW wind turbine generator. However, the proposed methods can be extended to larger generator designs without requiring considerable modification. The mass of the opti-mized 10MW BRPM generator is 160.7 tons (19.3 tons for the rotor and 141.4 tons for the stator) while that of an optimized conventional spoke arm-type generator is obtained as 325.6 tons.

Purpose: Carotid intraplaque hemorrhage (IPH) increases risk of territorial cerebral ischemic events, but different sequences or criteria have been used to diagnose or quantify carotid IPH. The purpose of this study was to compare manual segmentation and semi-automatic segmentation for quantification of carotid IPH on magnetization-prepared rapid acquisition with gradient-echo (MPRAGE) sequences. Methods: Forty patients with 16–79% carotid stenosis and IPH on MPRAGE sequences were reviewed by two trained radiologists with more than five years of specialized experience in carotid plaque characterization with carotid plaque MRI. Initially, the radiologists manually viewed the IPH based on the MPRAGE sequence. IPH volume was then measured by three different semi-automatic methods, with high signal intensity 150%, 175%, and 200%, respectively, above that of adjacent muscle on the MPRAGE sequence. Agreement on measurements between manual segmentation and semi-automatic segmentation was assessed using the intraclass correlation coefficient (ICC). Results: There was near-perfect agreement between manual segmentation and the 150% and 175% criteria for semi-automatic segmentation in quantification of IPH volume. The ICC of each semi-automatic segmentation were as follows: 150% criteria: 0.861, 175% criteria: 0.809, 200% criteria: 0.491. The ICC value of manual vs. 150% criteria and manual vs. 175% criteria were significantly better than the manual vs. 200% criteria (p < 0.001). Conclusions: The ICC of 150% and 175% criteria for semi-automatic segmentation are more reliable for quantification of IPH volume. Semi-automatic classification tools may be beneficial in large-scale multicenter studies by reducing image analysis time and avoiding bias between human reviewers.

This study aimed to investigate the effects of lupin flake supplementation on the growth, plasma parameters, carcass characteristics, and meat composition of late-fattening Hanwoo steers. The steers (n = 40) were randomly divided into the four groups with 10 steers each: LP0 (Lupin flake 0%), LP3 (lupin flake 3%), LP6 (Lupin flake 6%), and LP9 (lupin flake 9%). The total digestible nutriant intake increased as the concentration of lupin increased (linear and quadratic effects; P &lt; 0.05). The thiobarbituric acid-reactive substance content in the strip loins decreased as lupin flake supplementation levels increased (linear and quadratic effects; P &lt; 0.05), while carnosine levels increased linearly (P &lt; 0.05). As the lupin flake supplementation level increased, anserine and creatinine contents increased linearly and quadratically (P &lt; 0.05). Similarly, adenosine triphosphate (ATP) and adenosine monophosphate (AMP) contents increased with increasing lupin flake supplementation levels in linear and quadratic effects (P &lt; 0.001). Palmitoleic acid content increased significantly with increasing lupin flake supplementation level (linear and quadratic effects; P &lt; 0.05). The content of oleic acid in the strip loin was not significant, but the unsaturated fatty acid (UFA) (P &lt; 0.05) and n-6/n-3 ratio (P &lt; 0.05) increased. The results of this study indicated that although lupin flake supplementation did not markedly affect the growth, carcass characteristics, or meat composition of late-fattening Hanwoo steers, it exerted a positive effect on the flavor, taste profiles (anserine, creatinine, ATP, and AMP), hypotonicity(TBARS), and healthy meat production (UFA and n-6/n-3 ratio) related to beef.

Very poor oral health, common among older adults, is associated with cognitive decline.This study aimed to investigate the association between denture use, chewing ability, and cognitive function in Korean middle-aged adults using samples representing middle-aged people at the national level. This longitudinal study included 9,998 middle-aged adults via Korea Longitudinal Study of Aging 7th special survey data. Denture use, chewing ability, health-related factors, and general characteristics were assessed by the Computer Assisted Personal Interview. After controlling general characteristics using a generalized estimating equation model, the association of denture use and MMSE scores with chewing ability of those with or without dentures and MMSE scores were analysed. Twenty-four percent of participants wore dentures among them, 35.1% complained of difficulty chewing when wearing dentures. Among participants who did not wear dentures, 16.4% complained of difficulty chewing. MMSE scores were lower among denture-wearers than non-denture wearers (β = -0.026, p < 0.001). In both groups, MMSE scores decreased with chewing difficulty and were significantly reduced among non-denture wearers (p < 0.05). Chewing ability was closely associated with cognitive function. Given the negative effect of difficulty chewing on cognitive function, maintaining chewing ability should be of great concern.

Cancer, a globally prevalent and often deadly disease, holds promise for improved treatment through the integration of innovative medical technologies and interdisciplinary collaborations. Despite advancements, current cancer therapies lack a specific focus on addressing recurrence and targeting cancer stem cells (CSCs), known contributors to relapse. In this study, we utilized three types of cancer cells and generated three types of CSCs derived from them to conduct proteomic analysis and identified shared cell surface biomarkers as potential targets for a comprehensive treatment strategy. The selected biomarkers underwent evaluation through shRNA treatment, revealing contrasting functions in cancer and CSCs. Knocking down the identified protein showed promising results in regulating epithelial-mesenchymal transition (EMT) and stemness via the ERK signaling pathway. This led to a reduction in resistance to anticancer agents, ultimately enhancing the overall anticancer effects. Additionally, the biomarker's significance in clinical patient outcomes was confirmed using bioinformatics. Our study suggests a novel cancer treatment strategy that addresses existing limitations in current anticancer therapies.

Recently, the demand for electric vehicle is increasing worldwide due to eco-friendly policies and stricter emission regulations. As a traction motor for electric vehicle, interior permanent magnet synchronous motors are mainly used. For the design of the interior permanent magnet synchronous motor, the magnetic equivalent circuit method, which is a method of lumped constant circuit, and the finite element method, which is a method of distributed constant circuit, mainly are used. Magnetic equivalent circuit method is useful for simple design through fast and intuitive parameters, but it cannot derive the distribution of magnetic field. The finite element method can derive an accurate magnetic field distribution, but it takes a long time to analyze and it is difficult to analyze intuitive design parameters. In this paper, magnetic equivalent circuit method and Carter coefficient are mixed for rotor structure design. This design method will be called the hybrid magnetic equivalent circuit method. Intuitive design parameters are derived through this hybrid magnetic equivalent circuit method. We will derive the Air gap flux density distribution according to rotor shape, no-load induced voltage, and cogging torque, and compare and verify it with the finite element method.

This paper compares a series of traditional and deep learning methodologies for the segmentation of textures. Six well-known texture composites first published by Randen and Hus{\o}y were used to compare traditional segmentation techniques (co-occurrence, filtering, local binary patterns, watershed, multiresolution sub-band filtering) against a deep-learning approach based on the U-Net architecture. For the latter, the effects of depth of the network, number of epochs and different optimisation algorithms were investigated. Overall, the best results were provided by the deep-learning approach. However, the best results were distributed within the parameters, and many configurations provided results well below the traditional techniques.

In this study, carbon blocks were fabricated using isotropic coke and coal tar pitch as raw materials, with a variation in pressure during cold isostatic pressing (CIP). The CIP pressure was set to 50, 100, 150, and 200 MPa, and the effect of the CIP pressure on the mechanical and electrical properties of the resulting carbon blocks was analyzed. Microstructural observations confirmed that after the kneading, the surface of isotropic coke was covered with the pitch components. Subsequently, after the CIP, granules, which were larger than isotropic coke and the kneaded particles, were observed. The formation of these granules was attributed to the coalescence of kneaded particles under the applied pressing pressure. This granule formation was accompanied by the development of pores, some remaining within the granules, while others were extruded, thereby existing externally. The increase in the applied pressing pressure facilitated the formation of granules, and this microstructural development contributed to enhanced mechanical and electrical properties. At a pressing pressure of 100 MPa, the maximum flexural strength was achieved at 33.3 MPa, and the minimum electrical resistivity was reached at 60.1 μΩm. The higher the pressing pressure, the larger the size of the granules. Pores around the granules tended to connect and grow larger, forming crack-like structures. This microstructural change led to degraded mechanical and electrical properties. The isotropic ratio of the carbon blocks obtained in this study was estimated based on the coefficient of thermal expansion (CTE). The results confirmed that all carbon blocks obtained proved to be isotropic. In this study, a specimen type named CIP-100 exhibited the best performance in every aspect as an isotropic carbon block.

Suppressors of cytokine signaling (SOCS) influence cytokine and growth factor signaling by negatively regulating the JAK-STAT pathway. This maintains homeostasis during host immune response. However, functional characterization of SOCS family members in invertebrates is limited. In this study, we discovered the Type-I subfamily of the SOCS genes in the mealworm beetle, T. molitor. The full-length ORFs of TmSOCS5, TmSOCS6, and TmSOCS7 consisted of 1,389, 897 and 1,458 nucleotides, encoding polypeptides of 462, 297 and 485 amino acids, respectively, The C-terminal region of TmSOCS was highly conserved in the SH2 and SOCS box domains. Phylogenetic analysis revealed that the three SOCS genes clustered within the same sub-family and the highest amino acid identity was with the Tribolium castaneum SOCS genes (TcSOCS). While the expression of TmSOCS5 and TmSOCS6 was low in larval, pupal, and adult stages of the insect, TmSOCS7 showed higher expression. The expression of TmSOCS5 and TmSOCS6 was higher in larval hemocytes and adult ovary. The microbes expressed the three TmSOCS genes to varying degrees. C. albicans elicited the strongest response in the host with highest 15-fold expression in TmSOCS7 3 h post-inoculation. Collectively, these data suggest that the Type I TmSOCS could play a role in eliciting host immunity.

Primary spontaneous pneumothorax (PSP) is a pleural disease that abruptly affects healthy adolescents and young adults, representing a common thoracic disorder in this age group. This study aimed to investigate the necessity of preoperative chest tube insertion in patients with PSP and to re-evaluate current clinical treatment approaches. A retrospective review of medical records was conducted for children and young adults aged 14–30 years, diagnosed with PSP and who underwent Video-assisted thoracoscopic surgery (VATS) between January 2016 and December 2022 at Wonju Severance Christian Hospital. Patients were retrospectively divided into two groups based on their initial treatment: chest tube insertion and non-chest tube insertion. Clinical data including demographics, treatment details, and outcomes were collected and compared. Total 128 cases of PSP were included in the study. The total length of hospital stay was significantly shorter in the non-chest tube group (p=0.000), which was attributed to the omission of pre-operative chest tube insertions. No significant differences were observed between the two groups in terms of postoperative complications or recurrence rates. In cases of young patients with PSP, omitting pre-operative chest tube insertion may be a viable option if the patient is scheduled for VATS.

As broiler farming facilities have become larger and more concentrated in response to external environmental changes, there is a possibility of increased concentrations of fine dust and aerosols inside these facilities due to enclosure. In particular, workers are exposed to high concentrations of organic particulate matter and harmful gases while performing their tasks, and as they age, they become more vulnerable to respiratory diseases. It is essential to directly monitor the concen-trations to which workers are exposed, along with the spatial distribution of aerosols inside broiler house. In this study, we analyzed the regional aerosol concentrations using passive samplers in commercial tunnel-ventilated broiler farms. Simultaneously, we employed active samplers at the height of the workers' breathing zones to monitor real-time aerosol concentrations by particle size along their work routes. Spatial aerosol concentrations generally increased from the inlet to the exhaust in the breathing zone. The average aerosol concentrations were TSP -1,042 µg/m³, PM-10 718 µg/m³, and PM-2.5 137 µg/m³. To analyze the workers' exposure environments, we categorized the tasks in the barn into Static work period (SWP) and Moving work period (MWP) based on video analysis. The results showed that during MWP, fine dust concentrations exceeded the standards by up to 214%. Particularly, during MWP, the concentrations were 1.74 times higher for TSP, 1.40 times higher for PM-10, and 1.22 times higher for PM-2.5 compared to SWP. It was observed that during the movement of workers, physical generation of particles around 10 µm, such as feces, feed, and bedding, occurred due to the movement of chicken, which influenced the aerosol concentration.

Many farms utilize closed-type livestock systems to enhance productivity and facilitate effective environmental management. However, the confined nature of these closed spaces poses an increased risk of exposure to harmful gases and organic dust for both workers and livestock. Additionally, the introduction of outside air through ventilation systems can lead to temperature fluctuations within the breeding environment, resulting in potential productivity issues. This research paper employs computational fluid dynamics (CFD) to develop ventilation operation management plans that address both the working environment and the breeding environment simultaneously. The proposed plans are designed to be easily implemented in practical farm settings. The findings of this study, based on simulation analysis, indicate that while ventilation is effective in reducing harmful gases and improving the working environment, its efficiency decreases after the initial 3 minutes of operation. Furthermore, uncontrolled ventilation can cause sudden temperature changes, which may adversely affect the well-being of the livestock. However, when upgraded ventilation structures are implemented, significant improvements in the working environment (an average of 27.3% improvement) can be achieved while maintaining temperature stability for the livestock. These results highlight the importance of referring to the provided ventilation operation management table before commencing work, as it enables workers to improve the working environment while minimizing the potential impact of ventilation on the breeding environment.

Recent technological improvements have made abundant changes in construction industry. In specific, some technical applications, such as Building Information Modeling (BIM) opens up many possibilities. Some studies have articulated the use of BIM and its advantages in construction, but most of them are theoretical, not practical. This study is to provide an insight to such obstacles in BIM research. By investigating a real project that could utilize BIM in planning and construction phases, the authors try to investigate a possible outline of advantages in BIM implementation. The study area was set to a railway construction site in South Korea. The site covers a multiple railway tracks, stations, telecommunication facilities, infrastructure facilities, railway structures, and so numerous. In the site, the authors have identified 12 errors in 7 projects that could be prevented if BIM was utilized before the construction. The total upfront costs required to provide a BIM for 7 projects were $116,348. On the other hand, the total costs required to fix the errors in 7 projects were $166,486. This can be regarded as the benefits of using BIM because if BIM was implemented then the associated errors are easily replaced. Therefore, the benefit-cost ratio can be estimated as 1.32 for one-month delay and 1.36 for a three-month delay.

Robot-assisted gait training (RAGT) is a promising treatment for stroke rehabilitation. Although the coordination between the upper and lower limbs is important for locomotor training, commercially available robotics for gait training mainly focus on the restoration of lower limb function. We aimed to evaluate the feasibility and usability of complex upper and lower limb RAGT in stroke patients using the GTR-A®, end effector-type robotic device. Patients with subacute stroke (N=9) received 30-minute RAGT thrice a week for two weeks (six sessions). Functionally, the hand grip strength (HGS), Functional Ambulatory Categories, modified Barthel Index, muscle strength test sum score, Berg Balance Scale, Timed Up and Go test, and Short Physical Performance Battery were used. The heart rate and a structured questionnaire were used to evaluate cardiorespiratory fitness and the usability of RAGT. Among the nine patients, all functional parameters between the baseline and post-training were significantly improved after RAGT, except for HGS and the muscle strength test. The questionnaire’s mean scores for each domain were as follows: safety 4.40±0.35, effects 4.23±0.31, efficiency 4.22±0.77, and satisfaction 4.41±0.25. The GTR-A® is a feasible and safe robotic device for patients with gait impairment after stroke. It showed functional improvement with endurance training effects.