The accumulation of brown algae from the genus Sargassum has been increasing over the years in coastal regions of the Caribbean, Africa, Brazil, and Mexico. This causes harmful effects to the ecosystem, health, economy, and climate due to gas emissions from its decomposition process. There is the possibility of this biomass being reused in civil construction, and few studies have been carried out on its application to common Portland cement mortar. As such, the objective of this study is to evaluate the potential of sargassum ash as a mineral addition to partial replacement of fine aggregates in Portland cement mortar. Characterizations of the raw materials were carried out through X-ray fluorescence spectroscopy, loss on ignition, particle size distribution, Brunauer–Emmett–Teller (BET), real density, X-ray diffraction, scanning electron microscopy, and dispersion spectroscopy of electrons. The mortars were prepared by partially replacing the fine aggregate (sand) with sargassum ash, at 0%, 5%, 10% and 20%. Mortar performance was evaluated through water absorption, apparent porosity, apparent specific mass, compressive strength after 7, 28, and 63 days after curing. Lastly, a life cycle assessment in accordance with ISO standards 14040:2006 and 14044:2006. The results showed that replacing sand with sargassum ash increases water absorption, apparent porosity, and decreases the apparent specific mass and compressive strength as replacement increases. Nevertheless, the compressive strength results after 63 days, for 5 and 10% replacement did not differ statistically from reference values. The life cycle assessment indicates that mortars with partial replacement of sand by sargassum ash showed positive environmental impacts when compared to reference values for most categories regardless of the scenario analyzed, especially for mortar with 10% replacement. As such, the use of sargassum ash at 10% does not alter compressive strength values after 63 days while reducing its environmental impact. The application of this biomass in civil construction materials provides a destination for this algae that has been causing several social, environmental, and economic problems.

There have been beaching events of the marine alga pelagic sargassum in coastal regions of the Caribbean Sea, West African countries, and the north-northeast region of Brazil since 2011. Its presence has caused environmental and socioeconomic impacts while several studies were conducted in order to understand the causes of this phenomenon, as well as alternatives to mitigate its impacts. The objective of this research was to evaluate pelagic sargassum biomass as a raw material for the manufacture of medium-density multilayer particleboards. These are composed of 30% sargassum particles in their inner layer and 70% sugarcane bagasse particles on their outer layers which are bonded with castor oil-based polyurethane resin. A physical and chemical characterization was carried out in order to evaluate sargassum particles while physical and mechanical tests were carried out in order to evaluate the panels. Results were subsequently compared with indications from NBR 14810-2:2018 and ISO 16893:2016 standards. A life cycle assessment based on ISO 14040:2006 and 14044:2006 was carried out as to complement the feasibility study of these panels and to compare their different manufacturing processes. The multilayer panels met the minimum requirements for physical and mechanical properties established by regulations, indicating that the Sargassum spp. biomass can be used as filling. The life cycle assessment study indicates that sargassum panels produced in the Belém-PA-Brazil region present lower environmental impacts in four of seven evaluated categories when compared to conventional panels. As such, they constitute an alternative way to mitigate environmental impacts generated by beaching events.

This study evaluated the stability of the Poly-(sorbitol-co-citrate adipate) with potential applica-tion in the biomedical area. Thus, the physical, chemical and microbiological stability of this was investigated. First, the chemical stability in alkaline phosphate buffer (pH 7.4) was evaluated for 5 days. In aqueous solution, the copolymer acidified the medium indicating the presence of residual citric acid. In the moisture absorption test the results obtained followed the pH, reinforcing the presence of citric acid. In the evaluation of the antimicrobial activity the results indicate that the copolymer did not allow the growth of the yeast Saccharomyces cerevisiae, as the only source of carbon. However, in the cell lysis phase and due to the restriction of access to nutrients in the culture medium, the copolymer showed a loss of mass due to its use by the microorganism. Thus, it presented biodegradability property under extreme conditions of cell culture.

Statins prevent cardiovascular diseases, yet their use is limited by the muscle disturbances they cause. Rarely, statin-induced myopathy is autoimmune, but more commonly it is due to direct muscle toxicity. Available evidence suggests that statin-induced creatine deficiency may be a major cause of this toxicity, and that creatine supplementation prevents it. Statins inhibit guanidinoacetate methyl transferase (GAMT), the last enzyme in the synthesis of creatine, thus they decrease its intracellular content. Such decreased content could cause mitochondrial impairment, since creatine is the final acceptor of the phosphate group of adenosine triphosphate (ATP) at the end of mitochondrial oxidative phosphorylation. Decreased cellular synthesis of adenosine triphosphate (ATP) would follow. Accordingly, ATP synthesis is decreased in statin-treated cells. In vitro, creatine supplementation prevents the opening of mitochondrial permeability transition pore caused by statins. Clinically, creatine administration prevents statin myopathy in statin-intolerant patients. Additional research is warranted to hopefully confirm these findings. However, creatine is widely used by athletes with no adverse events, and has demonstrated to be safe even in double-blind, placebo-controlled trials of elder individuals. Thus, it should be trialed, under medical supervision, in patients who cannot assume statin due to the occurrence of muscular symptoms.

This draft aims at opening a discussion about the adequacy of non-stratal, non-derivational models of phonology, such as Declarative Phonology, to give appropriate accounts of any kind of phonological variation of morphemes. Refuting the assumption that all variants of one single morpheme correspond to a unique underlying form consecutively respecified through ordered adjustments of phonological shape, Declarative Phonology seems able to integrate explanations of both suppletive and non-suppletive alternation. A rough application of this model to suppletive alternation in Portuguese will be sketched out.

Multicellular life forms have evolved many times in our planet, suggesting that this is a common evolutionary innovation. Multiple advantages have been proposed for multicellularity (MC) to emerge. In this paper we address the problem of how the first precondition for multicellularity, namely "stay together" might have occurred under spatially limited resources exploited by a population of unicellular agents. Using a minimal model of evolved cell-cell adhesion among growing and dividing cells that exploit a localised resource with a given size, we show that a transition occurs at a critical resource size separating a phase of evolved multicellular aggregates from a phase where unicellularity (UC) is favoured. The two phases are separated by an intermediate domain where where both UC and MC can be selected by evolution. This model provides a minimal approach to the early stages that were required to transition from Darwinian individuality to cohesive groups of cells associated with a physical cooperative effect: when resources are present only in a localised portion of the habitat, MC is a desirable property as it helps cells to keep close to the available local nutrients.

Let G be a connected Lie group with Lie algebra g. This review is devoted to studying the fundamental dynamic properties of elements in the normalizer NG of G. Through an algebraic characterization of NG we analyze the different dynamics inside the normalizer. NG contains the well-known left-invariant vector fields and the linear and affine vector fields on G. In any case, we show the shape of the solutions of these ordinary differential equations on G. We give examples in low-dimensional Lie groups. It is worth saying that these dynamics generate the linear and bilinear control systems on Euclidean spaces and the invariant and linear control systems on Lie groups. Moreover, the Jouan Equivalence Theorem shows how to extend this theory to control systems on manifolds.

Solid state sensors having timing capabilities are becoming an absolute need in particle tracking techniques of future experiments at colliders. In this sense, silicon sensors having 3D structure are becoming an interesting solution, due to their intrinsic speed and radiation resistance. A characteristics of such devices is the strict dependence of their performance on their geometric structure, which can be widely optimised by design, thus requiring suitable tools for an accurate modeling of their behaviour. This paper illustrates the development, performance and use of the TCoDe simulator, specifically dedicated to the fast simulation of carrier transportation phenomena in solid state sensors. Some examples of its effectiveness in the design and analysis of 3D sensors is also given.

In our study, we investigated the prognostic significance of hematological markers—NLR (Neutrophil-to-Lymphocyte Ratio), PLR (Platelet-to-Lymphocyte Ratio), and RDW-CV (Red Blood Cell Distribution Width - Coefficient of Variation)—in 117 glioblastoma patients. Data collected from January 2016 to December 2018 included demographics, clinical scores, and treatment regimens. Unlike previous research, which often examined these markers solely before surgery, our unique approach analyzed them at multiple stages: preoperative, postoperative, and before adjuvant therapies. We correlated these markers with overall survival (OS) and progression-free survival (PFS) using statistical tools, including ANOVA, Cox regression, and Kaplan-Meier survival analyses, employing SPSS version 29.0. Our findings revealed notable variations in NLR, PLR, and RDW-CV across different treatment stages. NLR and PLR decreased after surgery, with some stabilization post-STUPP phase (NLR: p=0.007, η2p=0.06; PLR: p=0.001, η2p=0.23), while RDW-CV increased post-surgery and during subsequent treatments (RDW-CV: p < 0.001, η2p=0.67). Importantly, we observed significant differences between the preoperative phase and other treatment phases. Additionally, higher NLR and RDW-CV at the second-line treatment and disease progression were associated with an increased risk of death (NLR at 2nd line: HR=1.03, p=0.029; RDW-CV at progression: HR=1.14, p=0.004). We proposed specific marker cutoffs that demonstrated significant associations with survival outcomes when applied to Kaplan-Meier survival curves (NLR at 2nd line < 5: p<0.017; RDW-CV at progression < 15: p=0.007). Elevated NLR and RDW-CV at later treatment stages correlated with poorer OS and PFS. No significant preoperative differences were detected. These biomarkers may serve as non-invasive tools for glioblastoma management.

Background: The progression of periodontal diseases at national Portuguese level and its public awareness are of great interest, mainly due to the high burden of periodontitis. Objectives: To evaluate the prevalence progression of periodontal diseases in Portugal and correspondent public awareness, between 2004 and 2017, by using data from the Global Burden of Disease (GBD), Directorate-General of Health (DGH) and Google® Trends (GT). Methods: For the period 2004-2017, Portuguese national data of periodontal diseases prevalence were searched in the Institute for Health Metrics and Evaluation of GBD and DGH and for public awareness, GT comparison tool between Portuguese words for “Periodontitis”, “Gingivitis”, “Gums” and “Periodontal disease” trends was used. Results: For the period 2004-2017, the overall prevalence of periodontitis slightly increased from 11.3% to 11.7%. During that period the GT search term “Gums” (“Gengivas”) was the most relevant. It increased steadily over time while the search term “Periodontal disease” (“Doença periodontal”) decreased, being these search trends significantly correlated (

This article presents a comprehensive review of the relationship in sustainable tourism and blockchain technology. The aim of this research is to explore the potential of blockchain to promote sustainable tourism, as well as to evaluate the current state of research and practical implementations in this field. The findings demonstrate the potential of blockchain in enhancing sustainability practices in tourism, while also highlighting the challenges and limitations. The study provides valuable insights for policymakers, industry practitioners, and researchers, and proposes future research directions to further advance the field.

Plants are affected by soil environments to the same extent they affect soil functioning through interactions between environmental and genetic factors. Here, five plant species (broad bean, pea, cabbage, fennel, and olive) grown under controlled pot conditions were tested for their ability to differently stimulate the degradation of standard litter. Litter, soil C and N contents and soil microbial abundance were measured. The architecture and morphological traits of roots systems were also evaluated by using specific open-source software (SmartRoot). Soil chemical and microbiological characteristics were significantly influenced by the plant species. Variations in soil C/N dynamics were correlated with the diversity of root traits among species. Early-stage decomposition of the standard litter changed on the basis of the plant species. The results indicated that key soil processes are governed by interactions between plant roots, soil C and N, and the microbial metabolism that stimulate decomposition reactions. This, in turn, can have marked effects on soil chemical and microbiological fertility, both fundamental for sustaining crops, and can promote the development of new approaches for optimizing soil C and N cycling, managing nutrient transport, and sustaining and improving net primary production.

The use of Artificial Neural Networks (ANN) is a great contribution to medical studies since the application of forecasting concepts allows the analysis of future diseases propagations. In this context, this paper presents a study of the new coronavirus SARS-COV-2 with a focus on verifying the virus propagation associated with mitigation procedures and massive vaccination campaigns. There were proposed two methodologies to predict 28 days ahead the number of new cases, deaths, and ICU patients of five European countries: Portugal, France, Italy, United Kingdom, and Germany, and a case study of the results of massive immunization in Israel. The data input of cases, deaths, and daily ICU patients was normalized to reduce discrepant numbers due to the countries size, and the cumulative vaccination values by the percentage of population immunized, at least with one dose of vaccine. As a comparative criterion, the calculation of the mean absolute error (MAE) of all predictions presents the best methodology and targets other possibilities of use for the proposed method. The best architecture achieved a general MAE for the 1 to 28 days ahead forecast lower than 30 cases, 0,6 deaths and 2,5 ICU patients by million people.

Latest evidence revealed a possible association between Parkinson’s disease (PD) and periodontitis. We explored the causal relationship of this association through two-sample Mendelian randomization (MR) in European ancestry populations. To this end, we used openly accessible data of genome-wide association studies (GWAS) on PD and periodontitis. As instrumental variables for periodontitis, seventeen single-nucleotide polymorphisms (SNPs) from a GWAS of periodontitis (1817 periodontitis cases vs. 2215 controls) and forty-five SNPs from a GWAS of PD (20,184 cases and 397,324 controls). Eight non-overlapping SNPs of periodontitis from an additional GWAS assisted in the validation of association being studied. Multiple approaches of MR were carried-out. There was no evidence of genetic liability of periodontitis being associated with a higher risk of PD (B= -0.0003, Standard Error [SE] 0.0003, P = 0.26). The eight independent SNPs (B= -0.0000, SE 0.0001, P = 0.99) validated this outcome. We found no association of genetically primed PD towards periodontitis (B= -0.0001, SE 0.0001, P = 0.19). This MR study found no conclusive evidence to support a bidirectional causal genetic liability between PD and periodontitis. Further GWAS studies are needed to confirm the consistency of these results.

Recent studies supported a clinical association between Parkinson’s Disease (PD) and periodontitis. Hence, investigating possible protein interactions between these two conditions is of interest. In this study, we conducted a protein-protein network interaction analysis with recognized genes encoding proteins for PD and periodontitis. Genes of interest were collected via GWAS database. Then, we conducted a protein interaction analysis using STRING database, with a highest confidence cut-off of 0.9. Our protein network casted a comprehensive analysis of potential protein-protein interactions between PD and periodontitis. This analysis may underpin valuable information for new candidate molecular mechanisms between PD and periodontitis and may serve new potential targets for research purposes. These results should be carefully interpreted giving the limitations of this approach.

The relationship between religion and politics is a constant in the history of humanity. In the specific case of Western culture, it is possible to trace an archeology of the political as an effect of theological-political devices (essentially Christian-inspired). If we add to this the evolution of politics, in modern times, towards biopolitics, then the relationship focuses on very concrete topics. This is the case of the immunological process – from a personal, social, and philosophical perspective – thoroughly analyzed by Italian philosopher Roberto Esposito. In the context of his philosophical immunology, the place of religion is mainly archaeological and is interpreted critically. This article also aims to critically analyze his position, proposing a reading close to his thought but which is, at the same time, somewhat different.

The Atlantic Goliath Grouper Epinephelus itajara (Lichtenstein, 1822) is thought to occur on both sides of the Atlantic, from the Carolinas (USA) to Brazil in the western Atlantic, and from North Senegal to North Angola off West Africa in the eastern Atlantic. While there are fairly good data on their distribution in the western Atlantic, genetic verification of species status, confirmed occurrences, population status, fishing reports, and trade data are almost non-existent off West Africa. Part of the problem is that tropical West African countries lack a network of marine reserves that might protect this species. Add to this destruction of mangrove forests and other coastal habitats on which the species depends when in the post-larval and juvenile stages coupled heavy pollution and intense overfishing and it becomes clear that their survival is deeply threatened. The focus of this paper is to describe all of the known historical data and examine all current data to better evaluate their present status.

Background: We aimed to assess the association between DII and PD and the mediation effect of DII in the association of PD with systemic inflammation. Using the National Health and Nutrition Examination Survey (NHANES) 2009-2010, 2011-2012 and 2013-2014, participants that received periodontal exam and provided dietary recall data were included. The inflammatory potential of diet was calculated via DII. Periodontitis was defined according to the 2012 case definition. The clinical outcomes of interest were mean periodontal probing (PPD), mean clinical attachment loss (CAL) and thresholds of PPD and CAL. White blood cells (WBC), segmented neutrophils and C-reactive protein (CRP) were used as proxies for systemic inflammation. The periodontal measures were regressed across DII values using adjusted multivariate linear regression. Adjusted mediation analysis appraised the influence of DII in the association of periodontitis and systemic inflammation. 10,178 participants were included. DII was significantly correlated with mean PPD, mean CAL, thresholds of PPD and CAL, WBC, segmented neutrophils and DII (p<0.01). A linear regression logistic adjusted for multiple confounding variables confirmed the association between DII and mean PPD (B = 0.02, Standard Error [SE]: 0.02, p<0.001) and CAL (B = -0.02, SE: 0.01, p<0.001). The association of mean PPD and mean CAL with both white blood cells and segmented neutrophils were mediated by DII (from 2.1 to 3.5%, p<0.001). In the 2009-2010 subset, the association of mean CAL with serum CRP was mediated by DII (52.0%, p<0.01). In conclusion, inflammatory diet and PD may be associated. Also, the inflammatory diet significantly mediated the association of leukocyte counts and systemic inflammation with periodontitis.

Glutathione (GSH) and melatonin (MLT) are two antioxidants that have been described as having a protective role against oxidative stress in several animal species, improving sperm quality and survival after cryopreservation. Since there is no knowledge on the simultaneous use of these two substances concerning its effects on ram semen cryopreservation, this study aimed to evaluate the effects of MLT, GSH, or their association, on in vitro parameters of ram semen after thawing. During eight weekly sessions, the semen from three Merino rams was pooled, divided into four aliquots, and diluted with an egg yolk-based semen extender without (control) and with antioxidants (MLT 1mM, GSH 5mM, and MLT 1mM + GSH 5mM). Diluted semen was evaluated before and after freezing process. Supplementation of fresh semen with GSH at 5 mM had a deleterious effect on total motility progressive (TPM), curvilinear velocity (VCL), straight-line velocity (VSL), average-path velocity (VAP), linearity (LIN), straightness (STR) and increased slow spermatozoon (%). MLT at 1 mM also has a negative effect on TPM, VSL, and STR in fresh semen. In thawed semen, 1 mM of melatonin increased the TPM regarding the group control. Also, the combination of both antioxidants attenuates the negative effect of GSH 5mM on TPM, VSL and BCF. These results indicate that 5mM GSH impairs or does not improve sperm kinetic parameters in fresh semen and suggest that melatonin when combined with GSH plays a protective role on these effects.

Optical backbone networks constitute the fundamental infrastructure employed today by network operators to deliver services to users. As network capacity is a key factor influencing optical network performance, it is important to understand how topological and physical properties impact its behavior and to have the capability to estimate its value. In this context, we propose here a method to evaluate the network capacity that relies on the optical reach to account for physical layer aspects, in conjunction with constrained routing techniques for traffic routing. As this type of routing can lead to traffic blocking, particularly due to the limitation on the number of wavelengths per fiber, we also propose a fiber assignment algorithm designed to deal with this problem. We apply this method to a set of randomly generated networks using a modified Waxman model, and for a network with 60 nodes, in a scenario without blocking, we obtain capacities of about 2.5 Pbit/s for a symbol rate of 64 Gbaud and about 5 Pbit/s for a symbol rate of 128 Gbaud. Remarkably, this duplication in the total network capacity is achieved by an increase in the total fiber length of only about 51%.

Introduction: The purposes of this study were to seek for overall ratio (OR) and anterior ratio (AR) patients data in normal occlusion and Angle’s malocclusion studies, and to assess if such results support Bolton’s standards as general references. Methods: Pubmed, Medline, CENTRAL and Scholar databases were searched up to February 2018 (CRD42018088438). Gray literature was explored through OpenGray. Non-randomized clinical studies, published in English and assessing Bolton’s OR and AR in normal occlusion and Angle’s malocclusion groups (Class I, Class II, Class II division 1, Class 2 division 2, Class III) patients were included. OR and AR means and standard deviations (SD) were collected. Potential covariates (study design, publication year, country where the study was conducted, number of cases, gender, mesiodistal measurement method, and calibration method) were also extracted. The National Health Heart Lung, and Blood Institute’s Quality Assessment Tool for Observational Cohort and Cross-Sectional Studies was used to assess each included studies quality. Pairwise Random-Effects and Multilevel Bayesian Network Meta-Analyses were used to synthesize available data. Results: Fifty-two observational studies were included (8872 participants; male/females 2674/3272; 16 studies lacked gender information). For normal occlusion, global pooled estimates for OR and AR means were 91.74% (95% CI: 91.37-92.10) and 78.24% (95% CI: 77.85-78.63), respectively. We could identify on Angle’s Class III patients meaningful OR and AR mean deviations from normal occlusion (0.89, 95% credible interval [CrI], 0.66-1.12, and 0.66, 95% CrI, 0.38-0.94, respectively), while on Class I patients we found a meaningful mean deviation from normal occlusion only for OR (0.25, 95% CrI, 0.03-0.47). Concerning gender impact, male patients presented higher OR (0.30, 95% CI 0.00-0.59) and AR (0.41, 95% CI 0.00-0.83) mean values than females in Class I. Conclusions: The results show that global pooled OR and AR mean values for normal occlusion patients are slightly above Bolton’s original values. Class I, for OR mean values, and Class III, for both OR and AR, are proportionally larger than normal occlusion patients. Gender had almost no impact on teeth mesiodistal proportion.

Gender Identity Dysphoria (GID) is a condition characterized by a strong and persistent identification with the opposite sex. These people consider themselves victims of a sort of biological accident: "a soul in a wrong body". There are numerous theories on the origin of transsexualism: genetic, hormonal and psychological causes have been hypothesized, but those currently most accredited are the neuroanatomical ones. The cornerstones of hormone conversion therapy (Gender Affirming Hormone Therapy, GAHT) are feminizing hormones for transgender women (MtFs) and virilizing for transgender males (FtMs). GID can be present among adolescents and older people. For adolescents is now accepted reversible treatment of puberty withdrawal with hormones that stops the progression of pubertal development in the biological direction not accepted; for elderly people is suggested GAHT in reduced doses. Physicians should consider and discuss with people with GID about fertility preservation, general and cancer risks. We present also data of 127 transsexual patients enrolled at the Garibaldi-Nesima Andrology Clinic in Catania (Italy) from 2003 to 2020. To optimize the conversion treatment with sex hormones, transsexuals require long-term follow-up. GAHT must be performed by a doctor who is familiar with these problems. Therefore, the “do-it-yourself” trend and the lack of medical and laboratory checks over time should be absolutely discouraged. Before proceeding with the surgical sex reassignment, it is recommended to refer to an endocrinologist and psychologist or psychiatrist for a period of 2-3 years. The transition surgical conclusion process must be practiced by a quality surgical team.

In Portugal, cork oak (Quercus suber L.) stands cover 737 Mha, being the most predominant species of the montado agroforestry system, contributing for the economic, social and environmental development of the country. Cork oak decline is a known problem since the late years of the 19th century that has recently worsen. The causes of oak decline seem to be a result of slow and cumulative processes, although the role of each environmental factor is not yet established. The availability of Sentinel-2 high spatial and temporal resolution dense time series enables gradual processes monitoring. These processes can be monitored using spectral vegetation indices (VI) once their temporal dynamics are expected to be related with green biomass and photosynthetic efficiency. The Normalized Difference Vegetation Index (NDVI) is sensitive to structural canopy changes, however it tends to saturate at moderate-to-dense canopies. Modified VI have been proposed to incorporate the reflectance in the red-edge spectral region, which is highly sensitive to chlorophyll content while largely unaffected by structural properties. In this research, in-situ data on the location and vitality status of cork oak trees are used to assess the correlation between chlorophyll indices (CI) and NDVI time series trends and cork oak vitality at the tree level. Preliminary results seem to be promising since differences between healthy and unhealthy (diseased/dead) trees were observed.

The coffee leaf miner (CLM) Leucoptera coffeella moth is a major threat to coffee production. Insect damage is related to the feeding behavior of the larvae on the leaf. During the immature life stages, the insect feeds in the mesophyll, triggering necrosis and causing loss of photosynthetic capacity, defoliation, and significant yield loss to coffee crops. Chemical control is mandatory to sustain the coffee production chain, though market requirements move towards conscious consumption, claiming for more sustainable methods. In this overview, we discuss aspects about the CLM concerning biology, history, geographical distribution, economic impacts, and the most relevant control strategies in progress. Insights to develop an integrate approach for a safer and eco-friendly control of the CLM are discussed, including bio-extracts, nanotechnology, pheromones, and tolerant cultivars.

The main objective of this paper is to find a close link between the adaptive level of significance, presented here, and the sample size. We, statisticians, know of the inconsistency, or paradox, in the current classical tests of significance that are based on p-value statistics that is compared to the canonical significance levels (10%, 5% and 1%): "Raise the sample to reject the null hypothesis" is the recommendation of some ill-advised scientists! This paper will show that it is possible to eliminate this problem of significance tests. The Bayesian Lindley's paradox – "increase the sample to accept the hypothesis" – also disappears. Obviously, we present here only the beginning of a possible prominent research. The intention is to extend its use to more complex applications such as survival analysis, reliability tests and other areas. The main tools used here are the Bayes Factor and the extended Neyman-Pearson Lemma.

This paper proposes an upper bound for mine productivity and also a simple truck dispatch rule that demonstrates how tight the upper bound can be using simulation. It also proposes a greedy search to approximate the productivity upper bound, which is faster and often exact. Uncertainty is added to the simulation in order to verify how the productivity responds to it. Typically, the productivity upper bound is less tight close to its saturation point as a function of the number of trucks, where adding more trucks only increases queues. Furthermore, more uncertainty in the model typically leads to a less tight upper bound. The results are conducted using real data from an open pit mine in Brazil.

This research mapped significant social networks of victims of childhood sexual abuse, identifying relationships between childhood trauma and social bonds in adult life. Ten adult women, aged between 20 and 40 years, in psychiatric care for the consequences of trauma suffered in childhood participated in the research. For data collection, the map of significant social networks was used and analyzed through the structure, functions and attributes of the bonds. The network is composed of people from the Friendship, Family, Community, Work/Study and Health Teams group. The networks of friendships, family, co-workers or studies play a predominant role of emotional support, while the Health Teams also offer emotional support, but primarily provide clinical support in overcoming trauma and its consequences. The network of relationships has specific functions that maintain psychosocial integrity and help women to overcome the abuse suffered.

The increased availability of high resolution remote sensor data for precision agriculture 1 applications permits users to aquire deeper and more relevant knowledge about crops states that lead 2 inevitably to better decisions. The algorithm libraries being developed and evolved around these 3 applications rely on multi-spectral or hyper-spectral data acquired by using manned or unmanned 4 platforms. The current state of the art makes thorough use of vegetational indicies to guide the 5 operational management of agricultural land plots. One of the most challenging sub-problems is 6 to correctly identify and separate crop from soil. Thresholding techniques based on Normalized 7 Difference Vegetation Index (NDVI) or other such similar metrics have the advantage of being simple, 8 easy to read transformations of the data packed with useful information. Obvious difficulties arise 9 when crop/tree and soil have similar spectral responses as in case of grass filled areas in vineyards. 10 In this case grass and canopy are close in terms of NDVI values and thresholding techniques will 11 generally fail. Radiometric approaches could be integrated or replaced by a geometric approach that 12 is based on terrain data like Digital Surface Models (DSMs). These models are one of the ouputs 13 of orthorectification engines usually present in data acquired by using unmanned platforms. In 14 this paper we present two approaches based on DSM that are able to segment crop/tree from soil 15 while over gradient terrain. The DSM data are processed through a two dimensional data slicing or 16 reduction technique. Each slice is separately processed as a one dimensional time series to derive the 17 terrain and tree structures separately, here interpreted as object probability densities. In particular 18 the first approach is a Cartesian grid rasterization (CARSCAN) of the terrain and the second is its 19 immediate generalisation or radial grid rasterization of the DSM model (FANSCAN). The FANSCAN 20 recovers information from the original image at greater frequencies on the Fourier plane. These 21 approaches enable the identification of crop/tree from soil in case of slopes or hilly terrain without 22 any constraint on the displacement / direction of plant/tree row. The proposed algorithm uses pure 23 DSM information even if it is possible to fuse its output with other classifiers.

Recently, we demonstrated the validity of anomalous numbers law, known as Newcomb-Benford´s law, at the mammalian neuromuscular transmission, considering different extracellular calcium concentrations . The present work continues to examine how alterations in extracellular solution modulate the first digit law in the context of the spontaneous release of acetylcholine from the neuromuscular junction. We investigated if the intervals of miniature potentials collected at the neuromuscular junction obey the law in a hyperkalemic environment. The analysis showed that the interval between the miniature potentials at high potassium concentrations follows Newcomb-Benford´s law. Also, our data allowed us to uncover a conformity fluctuation as a function of the number of intervals of the miniature potentials. Finally, we discuss the biophysical implications of the present findings.

Using pumps operating as turbines (PATs) offers the possibility of increasing the sustainability of water and energy systems by recovering the excess of energy that would be otherwise lost in pressure reducing valves or head loss chambers. In on-grid applications, there are many research works and implementations of PATs. However, there is still limited research for the optimization of efficiency and stability of PATs operating in off-grid systems. This work contributes to the development of stable direct current (DC) off-grid electric systems based on PATs, by optimizing and analysing the energy efficiency and stability for a wide range of operation. A self-excited induction generator (SEIG) coupled to the PAT is provided to cover the conventional type of electric ma-chines typically coupled to the hydraulic pumps. In this context, a methodology is proposed, based on the hydraulic, mechanical and electric subsystems, to define the PAT-SEIG operational area, to maximize energy conversion and the system efficiency. This will guarantee stable electric output quantities when operating in a DC off-grid system. In addition, an analytical model is proposed to estimate the PAT-SEIG operation under specific conditions. With this, water managers are suitable to design and optimize an off-grid PAT-SEIG system and to define the best hydraulic machines, electronic equipment, and all different control elements to maximize energy conversion within the target of operational limits. To develop and verify this new methodology, two micro PAT-SEIG setups were implemented in the hydraulic laboratory of IST/CERIS under typical operating conditions. The proposed solution proved to be resilient under a variable load regime. The system's maximum efficiency can be adapted using different capacitor values for the excitation of the SEIG, and the operational range is limited to the electric components. Considering the nominal efficiencies of the system’s components, the maximum p.u. efficiency obtained for each PAT-SEIG system were between 0.7 and 0.8 p.u.

Age estimation is an important tool when dealing with human remains or undocumented minors. Although the skull, the skeleton or the hand-wrist are used on age estimation as maturity indicators, they often present lack of good conditions for a correct identification or estimation. Few systematic reviews (SRs) have been recently published; therefore, this umbrella review critically assesses their level of evidence and provides a general comprehensive view. An electronic database search was conducted in four databases (PubMed, Cochrane, WoS, LILACS) up to December 2022, focusing on SRs of age estimation through forensic dentistry procedures. The methodological quality was analyzed using the measurement tool to assess SRs criteria (AMSTAR2). Eighteen SRs were included, five of critically low quality, six of low quality, three of moderate quality and four of high quality. The SRs posited that Willems’ method is more accurate and less prone to overestimation; most methods seem to be geographically sensitive; and 3D-Imaging and artificial intelligence tools demonstrate high potential. The quality of evidence on age estimation using dental approaches was rated as low to moderate. Well-designed clinical trials and high standard systematic reviews are essential to corroborate the accuracy of the different procedures of age estimation in forensic dentistry.

In 2011, it was reviewed that there is a strong co-occurrence between major depression and chronic fatigue syndrome (CFS), with fatigue and physio-somatic symptoms being key symptoms of depression, and depressive symptoms appearing during the course of CFS. Moreover, the comorbidity between both conditions may in part be explained by activated immune-inflammatory pathways, including increased translocation of Gram-negative bacteria and increased levels of pro-inflammatory cytokines, such as interleukin (IL)-1. Nevertheless, the possible involvement of activated microglia in this comorbidity has remained unclear. This paper aims to review microglial disturbances in major depression, CFS and their comorbidity. A comprehensive literature search was conducted using the PubMed / MEDLINE database to identify studies that are relevant to this current review. Depressed patients present neuroinflammatory alterations, probably related to microglial activation, while animal models show that a microglial response to immune challenges including lipopolysaccharides is accompanied by depressive-like behaviors. Recent evidence from preclinical studies indicate that activated microglia have a key role in the onset of fatigue. In chronic inflammatory conditions, such as infections and senescence, microglia orchestrate an inflammatory microenvironment thereby causing fatigue. In conclusion, based on our review we may posit that shared immune-inflammatory pathways and activated microglia underpin comorbid depression and CFS and that activated microglia are the main orchestrators of this comorbidity. As such, microglial activation and neuro-inflammation may be promising targets to treat the overlapping manifestations of both depression and CFS.

Climate changes caused by anthropogenic actions can directly and indirectly affect living beings, including parasites and their hosts. Changes such as water temperature, pH, distribution of nutrients in the aquatic environment are some examples that can interfere with the fish community, whether in open water or in production systems. In this review, we will show how climate change can affect the adaptation of hosts and parasites in the aquatic environment and how these parasites can be used for environmental monitoring.

This paper proposes a reconceptualization of the hierarchical understanding of the human organism, challenging the conventional idea of the supremacy of the nervous system. We argue that symbiotic coexistence and functional interdependence among all systems provide the human body with remarkable resistance to the universal tendency of entropy. We first examine the basis of cellular life, referring to ATP and DNA, essential substances that resist the entropic tendency through complex energy mechanisms. Next, we analyze the collaboration between the body's systems, highlighting the critical role of erythrocytes, which constitute 83.9% of the total cells (24.9 trillion), in the context of energy maintenance and homeostasis. We challenge the conventional view that the nervous system, composed of neurons and glial cells, which together make up 0.6% of the total cells (0.17 trillion), occupies the apex of a biological hierarchy, arguing that the nervous system is merely a component of a broader, interdependent mechanism. Finally, we provide a detailed description of human cellular composition, emphasizing the importance of each cell type in the functional context, thus contributing to the totality of the organism. With this, we present a vigorous appeal for the realization of critical reassessments of fundamental premises in human biology.

This work describes and interprets the presence of heavy minerals in the western Portuguese continental margin using a set of 78 bottom samples collected from 3 distinct areas of this margin: Porto, Aveiro and Nazaré canyon head areas. The main transparent heavy mineral suite (minerals with frequencies >10%), is composed by amphiboles (hornblende), mica (biotite), andalusite, tourmaline and garnet. A secondary suite (minerals with frequencies between 1 and 10%), is composed by pyroxene (enstatite, diopside and augite), staurolite, zircon and apatite. With very low frequency representing less than 1% we found rutile, olivine, kyanite, monazite, epidote, sphene, anatase, sillimanite and brookite. The main primary sources (igneous and metamorphic rocks) explain the presence of these minerals. However, the application of the principal component analysis, with a previous application of the centered log ratio transformation of the heavy mineral data, also stresses for the importance of the grain sorting as a process in controlling the heavy mineral occurrence. The importance of this process is mostly sustained by the distribution pattern of mica and of the most flattened amphibole grains in a way that these particles tend to have a hydraulic affinity to finer grained sediments.

Over the last two decades, a considerable amount of equipment has been acquired (spreaders, seeders, sprayers, among others) to respond to the challenges of Precision Agriculture (PA) concept. Most of this equipment has been purchased at a high cost. However, many of them, despite still being functional and equipped with sensors, actuators, and electronic processing units capable of adjusting to variations in speed, have become obsolete in terms of communication, and incompatible with new monitoring and control systems based on the “Isobus” protocol. This work aims to present a solution for updating the control system (“Ferticontrol”) of a “Vicon RS-EDW” spreader with variable rate application (VRA), making it compatible with the “InCommand” system from “Ag Leader”. The solution includes low-cost “Arduino” and “Raspberry Pi” microcontrollers and open-source software. The development shows that it is possible to implement a solution that is accessible to farmers in general. It also provides a niche business opportunity for young researchers to set up small technology-based enterprises associated with universities and research centers. These partnerships guarantee permanent innovation and represent a decisive step towards modern, technological, competitive, and sustainable agriculture.

The annual energy matrix has been changing in the last years because of the necessity of less dependence on fossil fuels, which are running out on the planet. Therefore, a study was started to simulate the most efficient production of H2 through COMSOL Multiphysics®, as it is a gas that in the future will be essential to supply the world's energy necessities, due to its easy to get and insert in piped gas pipes. From this study, we were able to present an optimization of parameters that presents good indications of how to obtain efficient hydrogen production in an idealized reactor.

The aim of this study was to develop and validate a predictive early tooth loss multivariable model for periodontitis patients before periodontal treatment. A total of 544 patients seeking periodontal care at a university dental hospital were enrolled in the study. Teeth extracted after periodontal diagnosis and due to periodontal reasons were recorded. Clinical and sociodemographic variables were analyzed, considering the risk of short-term tooth loss. This study followed the Transparent Reporting of a multivariable prediction model for Individual Prognosis Or Diagnosis (TRIPOD) guidelines for development and validation, with two cohorts considered as follows: 455 patients in the development phase and 99 in the validation phase. As a result, it was possible to compute a predictive model based on tooth type and clinical attachment loss. The model explained 25.3% of the total variability and correctly ranked 98.9% of the cases. The final reduced model area under the curve (AUC) was 0.809 (95% Confidence Interval (95% CI): 0.629 - 0.989) for the validation sample and 0.920 (95% CI: 0.891 - 0.950) for the development cohort. The established model presented adequate prediction potential of early tooth loss due to periodontitis. This model may have clinical and epidemiologic relevance towards the prediction of tooth loss burden.

Polypharmacy and malnutrition are common health issues among older adults. In older people, there is a high prevalence of polypharmacy and malnutrition, and preliminary data also indicates that there is a significant of Food Supplements (FS) use, increasing the risk of duplication of thera-pies and several adverse reactions and drug-FS and FS-FS interactions. The intervention of health professionals in mitigating these risks is essential. This review not only underscores and discusses the potential association between polypharmacy, malnutrition, and food supplements but also presents current scientific evidence on polypharmacy, malnutrition, and the use of food supplements by the elderly. The work reviews the challenges, advantages and risks of using FS for the elderly who are polymedicated and/or malnourished, focusing on the good practices needed to support healthy ageing. In this regard, the paper intends to help health professionals better deal with the issue of polypharmacy and the use of multiple FS to overcome the malnutrition problem and improve the health and well-being of older adults.

Oral health involves physiological functions related to mouth, teeth and orofacial structures, but also includes psychological and social dimensions. In this sense, oral health is an integrated part of human general health and well-being. Our aim was to access and evaluate the general oral health status of a high- and elite-level sample of Portuguese athletes from different sports. One hundred and sixteen participants were examined regarding their dental relationships, teeth and periodontal health, the presence of parafunctional activities (bruxism), and current or past orthodontic treatment. Our sample were predominantly adolescents and young adults, including 54 high-level and 62 elite subjects (71 males and 45 males) from 11 different sports, but mainly from swimming and athletics. Most sport performers presented with normocclusion (77%), despite the presence of other sagittal, transverse and vertical malocclusions. Twenty-three participants were affected by dental caries and six had missing teeth. Gingivitis (~40%) and dental calculus (~30%) were presented in our sample. Bruxism signs (47%) and current or past orthodontic treatment (~22%) were also found. Oral health conditions are not under control among high- and elite-level athletes, supporting the importance of healthcare needs and oral health promotion strategies in sports.

Oral health surveys are essential to assess the dental caries experience and to influence national policies. This retrospective cross-sectional study aims to analysis dental caries experience who sought dental treatment in a reference university dental hospital at the Lisbon Metropolitan Area between January 2016 and March 2020. Full-mouth examination, sociodemographic, behaviors and medical information were included. Descriptive analyses and logistic regression analysis were applied to ascertain risk indicators associated with dental caries experience. A final sample of 9,349 participants (5,592 females/3,757 males) were included, aged 18 to 99 years old. In this population, caries experience was 91.1%, higher in female participants. Age (OR= 1.01, 95% CI [1.00-1.02], occupation (OR= 2.94, 95% CI [2.37-3.65], OR= 3.35, 95% CI [2.40-4.67], OR= 2.55, 95% CI [1.66-3.91], for employed, unemployed and retired, respectively), overweight (OR= 1.52, 95% CI [1.18-1.96]), reporting to never visited a dentist (OR= 0.38, 95% CI [0.23-0.64] and self-reported week teeth status (OR= 2.14, 95% CI [1.40-3.28]) were identified as risk indicators for the presence of dental caries, according to adjusted multivariable logistic analyses. These results highlight a substantial rate of dental experience in a Portuguese cohort and will pave the way for future tailored oral public health programs in Portugal.

This paper discusses the use of networks of Inertial Measurement Units (IMU) for the reconstruction of trajectories from sensor data. Logistics is a natural application domain, to verify the quality of the handling of goods. This is a mass application and the economics of logistics impose that IMUs to be used must be low cost and use basic computational devices. The approach in the paper converts a strategy from the literature, used in the multi-target following problem, to reaching a consensus in a network of IMUs. The paper presents results on how to achieve the consensus in trajectory reconstruction, along with covariance intersection data fusion of the information obtained by all nodes in the network.

The study of energy sources has been an awareness of the modern world due to constraints on the current energy worldwide supply chain. The complexity of the theme as well as the consciousness of finite sources also the need of saving energy has become a priority. Although many papers have moved in this direction there is no record of papers studying the variables in a house heating system, which represents the highest energy consumption in many cold countries. This paper explores the energy-saving theme by studying the main variables present in houses’ heating systems in the winter season in cold countries like Canada, Russia, Norway, Iceland, Finland, etc. By using a novel combination of numerical thermal simulation by COMSOLTM and statistical analysis by MiniTabTM , it was possible to design an efficient thermal distribution in a house with the variables of the system by determining their significance and interaction qualitatively.

Nitrogen use efficiency (NUE) in maize (Zea mays L.) is an important trait to maximize yield with minimal input of nitrogen (N) fertilizer. Expired Plant Variety Protection (ex-PVP) Act-certified germplasm may be an important genetic resource for public breeding sectors. The objectives of this research were to evaluate the genetic variation of N-use traits and to characterize maize ex-PVP inbreds adapted to the U.S. Corn Belt for NUE performance. Eighty-nine ex-PVP inbreds [36 stiff stalk synthetic (SSS), and 53 non-stiff stalk synthetic (NSSS)] were genotyped using 26,769 single-nucleotide polymorphisms, then 263 single-cross maize hybrids derived from these inbreds were grown in eight environments from 2011 to 2015 at two N fertilizer rates (0 and 252 kg N ha⁻¹) and three replications. Genetic utilization and the yield response to N fertilizer were stable across environments and were highly correlated with yield under low and high N conditions, respectively. Cluster analysis identified inbreds with desirable NUE performance. However, only one inbred (PHK56) was ranked in the top 10% for yield under both N-stress and high N conditions. Broad-sense heritability across 12 different N-use traits ranged from 0.11 to 0.77, but was not associated with breeding value accuracy. Nitrogen-stress tolerance was negatively correlated with the yield increase from N fertilizer.

The aim of the present study was to investigate whether chronic undernutrition modifies the response to rostafuroxin in juvenile rats. Chronic undernutrition was induced in male rats using a multideficient diet known as Regional Basic Diet (RBD), mimicking alimentary habits in impoverished regions worldwide. Animals were given RBD – or a control/CTRL normal diet for rodents – from weaning to 90 days, and rostafuroxin (1 mg/kg body mass) or vehicle were orally administered during the last 30 days. Undernourished rats became hypertensive at 55–60 days of age (tail-cuff recording). During the last two days, the rats were hosted in metabolic cages to measure food/energy, water, Na+ ingestion, and urinary volume. Blood and kidneys were collected after euthanasia. Rostafuroxin increased food/energy and Na+ intake in CTRL and RBD rats but had opposite effects on Na+ balance (intake minus urinary excretion): negative in CTRL and positive in RBD. The drug normalized the decreased plasma Na+ concentration found in RBD rats, increased urinary volume in RBD but not in CTRL, and decreased and increased urinary Na+ concentration in the RBD and CTRL groups, respectively. Rostafuroxin decreased the ouabain-sensitive (Na++K+)ATPase and increased the ouabain-resistant, furosemide-sensitive Na+-ATPase from proximal tubule cells in both groups, and normalized the systolic blood pressure in RBD without effect in CTRL rats. We conclude that chronic undernutrition modifies the response of blood pressure, caloric metabolism, Na+ distribution in liquid compartments, mobilization of Na+ from non-osmotic compartments, Na+ and water balance, and activity of renal Na+-transporting ATPases to rostafuroxin.

Acute lymphoblastic leukemia (ALL) is a blood cancer that primarily affects children but also adults. It is due to the malignant proliferation of lymphoid precursor cells that invade the bone marrow and can spread to extramedullary sites. ALL is divided into B cell (85%) and T cell lineages (10 to 15%); rare cases are associated with the natural killer (NK) cell lineage (<1%). To date, the survival rate in children with ALL is excellent while in adults continues to be poor. Despite the therapeutic progress, there are subsets of patients that still have high relapse rates after chemotherapy or hematopoietic stem cell transplantation (HSCT) and an unsatisfactory cure rate. Hence, the identification of more effective and safer therapy choices represents a primary issue. In this review, we will discuss novel therapeutic options including bispecific antibodies, antibody-drug conjugates,chimeric antigen receptor (CAR)-based therapies, and other promising treatments for both pediatric and adult patients.

This systematic review investigates the failure rate and marginal bone loss (MBL) of dental implants placed in Solid-organ transplant (SOT) patients compared to healthy controls. Three databases (PubMed, Web of Sciences and the Cochrane Library) were searched up to June 2020 (PROSPERO CRD42019124896). Case-control and cohort studies reporting data failure rate and marginal bone loss (MBL) of dental implants placed in SOT patients were included. The risk of bias of observational studies was assessed through the Newcastle-Ottawa Scale (NOS). Four case-control studies fulfilled the inclusion criteria, all of low risk of bias. Meta-analyses revealed consistently lower implant failure rate than control populations at patient and implant levels. SOT patients had a significant difference of -18% (p-value <0.001) of MLB towards healthy patients. SOT status poses no serious threat to implant survival. Overall, this group of patients presented lower levels of dental implant failure rate and marginal bone loss compared to otherwise healthy patients. Further intervention trials with wider sample size and longer follow-ups are necessary to confirm these summary results.

With the goal of representing common denominators of aging in different organisms López-Otín et al. in 2013 described nine hallmarks of aging. Since then, this representation has become a major reference point for the biogerontology field. The template for the hallmarks of aging account originated from landmark papers by Hanahan and Weinberg (2000, 2011) defining first six and later ten hallmarks of cancer. Here we assess the strengths and weaknesses of the hallmarks of aging account. As a checklist of diverse major foci of current aging research, it has provided a useful shared overview for biogerontology during a time of transition in the field. It also seems useful in applied biogerontology, to identify interventions (e.g. drugs) that impact multiple symptomatic features of aging. However, while the hallmarks of cancer provide a paradigmatic account of the causes of cancer with profound explanatory power, the hallmarks of aging do not. A worry is that as a non-paradigm the hallmarks of aging have obscured the urgent need to define a genuine paradigm, one that can provide a useful basis for understanding the mechanistic causes of the diverse aging pathologies. We argue that biogerontology must look and move beyond the hallmarks to understand the process of aging.

Optical networks, characterized by using optical fibers as a transmission medium, constitute the fundamental infrastructure employed today by network operators to deliver services to users. As network capacity is one of the key factors influencing optical network performance, it is important to comprehend its limitations and have the capability to estimate its value. In this context, we revisit the concept of capacity from various perspectives, including channel capacity, link capacity, and network capacity, thus providing an integrated view of the problem. Hence, we review the fundamental concepts behind optical networks, along with the basic physical phenomena present in optical fiber transmission and provide methodologies for estimating the different types of capacities, mainly using simple formulations. In particular, we propose a method to evaluate the network capacity that relies on the optical reach to account for physical layer aspects, in conjunction with capacitated routing techniques for traffic routing. We apply this method to three reference networks and obtain capacities ranging from tens to hundreds of Terabits/s. Whenever possible, we also compare our results with published experimental data to understand how they relate.

Selenium and iodine are essential micronutrients for humans. They are often deficient in food supply due to low phytoavailable concentrations in soil. Agronomic biofortification of food crops is one approach to overcome micronutrient malnutrition. This study focused on German consumers’ willingness to purchase selenium- and/or iodine-biofortified apples. For this purpose, an online survey was carried out. In this context, consumers were asked to choose their most preferred apple product from a set card of product alternatives (Discrete Choice Experiment). The multinomial logit model results demonstrated that German consumers’ have a preference in particular for iodine-biofortified apples. Furthermore, apple choice was mainly influenced by price, health claims, and plastic-free packaging material. Viewed individually, selenium did not exert an effect on product choice whereas positive interactions between both micronutrients exist.

In 2020, following the World Health Organization's declaration of COVID-19 as a pandemic, dental practices faced unprecedented disruptions globally. This retrospective cross-sectional study, conducted at a leading university dental hospital in the Lisbon Metropolitan Area, investigated the impact of these disruptions on dental caries. The study, spanning June 2019 to June 2021, included a full-mouth X-ray examination, along with sociodemographic, behavioral, and medical data. Our sample comprised 3,380 participants (2,007 females and 1,373 males), aged 18 to 99 years, divided into pre-lockdown and post-lockdown groups. We employed the Decayed, Missing, and Filled Teeth (DMFT) index to measure dental caries. Our findings revealed that nearly 90% of participants in both groups experienced dental caries, indicating a statistically significant difference between the pre-lockdown and post-lockdown periods. However, the impact of COVID-19 confinement varied among different demographic sectors, with age, educational background, and professional status emerging as the key determinants. This study highlights the need for a more nuanced understanding of the impact of the pandemic on oral health, emphasizing the role of sociodemographic factors in shaping dental health outcomes during such global health crises.

The clinical interaction between stroke and periodontitis has been consistently studied and confirmed. Hence, forecasting potentially new protein interactions in this association using bioinformatic strategies presents potential interest. In this exploratory study, we conducted a protein-protein network interaction (PPI) search with documented encoded proteins for both stroke and periodontitis. Genes of interest were collected via GWAS database. The STRING database was used to predict the PPI networks, first in a sensitivity purpose (confidence cut-off of 0.7), and then with a highest confidence cut-off (0.9). Genes over-representation was inspected in the final network. As a result, we foresee a prospective protein network of interaction between stroke and periodontitis. Inflammation, pro-coagulant/pro-thrombotic state and ultimately atheroma plaque rupture is the main biological mechanism derived from the network. These pilot results may pave the way to future molecular and therapeutic studies to further comprehend the mechanisms between these two conditions.

In this work, we present a model of the atom that is based on a nonclassical logic called paraconsistent logic (PL), which has the main property of accepting the contradiction in logical interpretations without the conclusions being annulled. The proposed model is constructed with an extension of PL called paraconsistent annotated logic with annotation of two values (PAL2v), which is associated with an interlaced bilattice of four vertices. We use the logarithmic function of the Shannon entropy H_(s) to construct the paraconsistent equations and thus adapt a probabilistic model for representations in quantum physics. Through analyses of the interlaced bilattice, comparative values are obtained for some of the phenomena and effects of quantum mechanics, such as superposition of states, quantum entanglement, wave functions, and equations that determine the energy levels of the layers of an atom. At the end of this article, we use the hydrogen atom as a basis of the representation of the PAL2v model, where the values of the energy levels in six orbital layers are obtained. As an example, we present a possible method of applying the PAL2v model to the use of Raman spectroscopy signals in the detection of lubricating mineral oil quality.

Renewable energy sources are increasingly crucial for meeting global energy demands in an eco-friendly manner, particularly as the world shifts away from fossil fuels and faces higher volatility of the market prices. Portugal, a country with limited fossil fuel reserves and high energy dependency, has heavily invested in renewables in recent years. However, renewables like sunlight, wind, and water are inherently unsteady due to climate influences, resulting in energy production fluctuations. To mitigate this issue, energy storage systems are being deployed to stabilize renewable energy supply during production lulls. This project aims to assess an energy storage system and define technical specification in order to maximize profitability at the Finerge-owned Alto Douro wind farm. To achieve this, we've conducted an energy demand analysis, followed by simulations to assess system performance in relation to energy use and profit, while varying parameters such as power and efficiency. We've also compared commercial proposals from different battery manufacturers utilizing various technologies. Our findings suggest that high-power, quick charge-discharge lithium-ion batteries are the most suitable solution, given their efficiency and modularity. These attributes are vital for achieving current and future profitability.

Multicriteria decision aid requires a database as a decision matrix, in which two or more alternatives are evaluated according to two or more variables selected as decision criteria. Several problems of this nature use measures by Likert scales. Depending on the method, parameters from these data (e.g. means, modes or medians) are required for calculations. This parameterization of data in ordinal scales has fueled controversy for decades between authors who favor mathematical/statistical rigor and argue against the procedure, stating that ordinal scales should not be parameterized, and scientists from other areas who have shown gains from the process that compensate for this relaxation. The aim of this article is to demonstrate the advantages of the Composition of Probabilistic Preferences (CPP) method in multicriteria problems with data from Likert scales. The CPP is capable of allaying the protests raised and obtaining more accurate results than descriptive statistics or parametric models can bring. The proposed algorithm in R-code involves the use of CPP with empirical distributions and fitting histograms of data measured by Likert scales. Two case studies with simulated datasets having peculiar characteristics and a real case illustrate the advantages of the CPP.

Climate change is expected to influence cooling and heating energy demand of residential buildings and affect overall thermal comfort. Towards this end, the heating degree-day (HDD), the cooling degree-day (CDD) and the HDD+CDD were computed from an ensemble of 7 high-resolution bias-corrected simulations attained from EURO-CORDEX under RCP4.5 and RCP8.5. These three indicators were analyzed for 1971-2000 (from E-OBS) and 2011-2040 and 2041-2070, under both RCPs. Results show that the overall spatial distribution of HDD trends for the 3 time-periods points out an increase of energy demand to heat internal environments in Portugal's northern-eastern regions, most significant under RCP8.5. It is projected an increase of CDD values for both scenarios; however, statistically significant linear trends were only found for 2041-2070 under RCP4.5. The need for cooling is almost negligible for the remaining periods, though linear trend values are still considerably higher for 2041-2070 under RCP8.5. By the end of 2070, higher amplitudes for all indicators are depicted for southern Algarve and Alentejo regions, mainly under RCP8.5. For 2041-2070 the Centre and Alentejo (North and Centre) regions present major positive differences for HDD(CDD) under RCP4.5(RCP8.5), within the 5 NUTS II regions predicting higher heating(cooling) requirements for some locations.

The city of Lisbon, has any other capital of a European country, has a large number of issues while managing the waste and recycling containers spread throughout the city. This document presents the results of a study promoted by the Lisbon City Council for trialing LPWAN technology on the waste management vertical under the Lisbon Smart City initiative. Current waste management is done using GSM sensors, and the aim is to use LPWAN to reduce the costs, improve range and reduce provisioning times when changing the communications provider. After an initial study, LoRa was selected as the LPWAN of choice for the trials. The study is composed of multiple use cases at different distances, types of recycling waste containers, placements (underground and surface) and different kinds of waste level measurement LoRa sensors, deployed in order to assess the impact of the different use cases on the LoRa sensor usage. The results shown that the underground waste containers present the most difficult challenge, where the container itself imposes attenuation levels of 26dB on the link budget. The results promoted the deployment of a city wide LoRa network available to all departments inside the Lisbon City Council, and considering the network capacity the network, the network is also available to citizens to be used freely.

The Double Diaphragm Forming (DDF) process uses vacuum pressure and heat to pre-shape composite reinforcements between flexible diaphragms. Accurate modelling of heat transfer within DDF requires knowledge of the thermophysical properties of the constituent materials. This study investigates the specific heat and thermal conductivity of silicone diaphragms, carbon fibers (chopped and powdered), thermoplastic veils, and their combinations. Experiments measured the specific heat of each material using differential scanning calorimetry and the thermal conductivity of silicone and carbon fabric preforms using the transient plane source method and modified transient plane source method respectively. The influence of reheating cycles on specific heat of carbon fiber-veil samples and the effect of compaction on thermal conductivity of silicone and carbon fabrics were explored. While silicone exhibited linear specific heat behavior, the thermoplastic veil showed non-linearity due to phase change. The combined carbon fiber-veil samples demonstrated slight non-linear specific heat variations depending on reheating cycles. Thermal conductivity of the fabric preforms decreased with the addition of thermoplastic veil and under vacuum-compaction conditions. The established temperature-dependent property relationships provide valuable data for optimizing DDF preforming parameters and enhancing energy efficiency in composite manufacturing.

Laser-Powder Directed Energy Deposition (DED-LB/Powder) is an additive manufacturing process that is gaining popularity in the manufacturing industry due to its numerous advantages, particularly in repairing operations. However, its application is often limited to case studies due to some critical issues that need to be addressed, such as the degree of internal porosity. This paper investigates the effect of the most relevant process parameters of the DED-LB/Powder process on the level and distribution of porosity. Results indicate that, among the process parameters examined, porosity is less affected by travel speed and more influenced by powder mass flow rate and laser power. Additionally, a three-dimensional finite element transient model was introduced, which was able to predict the development and location of lack-of-fusion pores along the building direction.

In recent times, there has been a revolutionary surge in antioxidant research, with a focus on harnessing microalgae to enhance wellness and extend human longevity. Microalgae, a diverse group of unicellular photosynthetic organisms, have emerged as promising sources of natural antioxidants due to their ability to synthesize various bioactive compounds, including carotenoids, polyphenols, and tocopherols. These antioxidants play a pivotal role in scavenging free radicals and reducing oxidative stress, known contributors to aging and chronic diseases. This review provides an overview of recent advancements in understanding microalgae's antioxidant potential, covering their biochemical composition, extraction techniques, and purification methods. Moreover, it delves into compelling in vitro and in vivo studies showcasing microalgae-derived antioxidants' protective effects against oxidative damage, inflammation, cardiovascular diseases, and neurodegenerative disorders. The sustainable cultivation of microalgae in controlled environments further supports the potential for large-scale production and commercialization of their antioxidant compounds. As microalgae continue to revolutionize antioxidant research, they hold immense promise in developing novel preventive and therapeutic strategies to promote human health and wellbeing.

In order to meet the Millennium Development Goals set forth by the United Nations’ Millennium Summit that took place in 2000, in New York, particularly in the area of education, the Mozambican Government decided that, from 2003 onwards, during their primary school formation, students should be passed automatically even if they do not have enough intellectual capacities that justify their progress. In fact, this decision was made during a period when there were many pupils being failed, due to various reasons. After more than 15 years of its implementation, this paper aims to analyzing the results acquired from this decision, from the point of view of the quality of education. This will be done taking into account the prevailing situation of education in Mozambique. Having considered these aspects, the paper will move on to presenting some of the challenges and opportunities that the country should consider in the area of education, as a way to bring about better outcomes and promote development, in the country.

This study clearly shows that the corona pandemic has a significant impact on consumers’ eating habits. More food is eaten overall, and more convenience products such as ready meals and canned food with a longer shelf life are purchased. The consumption of alcohol and confectionery has also increased. In return, the consumption of fresh fruit and vegetables has declined. It becomes clear that families who are financially affected by the pandemic represent a vulnerable group. With the increasing duration of the pandemic, repeated lockdowns, corona-related closings of schools and kindergartens, health consequences are to be expected in the medium to long term, especially for this population group.

In recent decades, the requirements for implantable medical devices increased, but the risks of implant rejection still exist. These issues are primarily associated with poor osseointegration, leading to biofilm formation on the implant surface. This study focuses on addressing these issues by developing a biomaterial for implant coatings. 45S5 Bioglass has been widely used in tissue engineering due to its ability to form a hydroxyapatite layer, ensuring a strong bond between the hard tissue and the bioglass. In this context, 45S5 bioglasses, modified by the incorporation of different amounts of copper oxide, from 0 to 8 mol%, were synthesized by the melt-quenching technique. The incorporation of Cu ions does not show a significant change in the glass structure. Since the bioglass exhibited the capacity of being polarized, and therefore promoting the osseointegration effectiveness, the electrical properties of the prepared samples were studied using the impedance spectroscopy method, in the frequency range of 102-106 Hz and temperature range of 200-400 K. The effects of CuO on charge transport mobility were investigated. Additionally, the bioactivity of the modified bioglasses was evaluated through immersion tests in simulated body fluid. The results revealed the initiation of a Ca-P-rich layer formation on the surface within 24 h, indicating the potential of the bioglasses to enhance the bone regeneration process.

The last decade has seen remarkable progress in the characterization of methylation clocks that track biological age in humans and many other mammalian species. While the biological processes of aging that underlie these clocks have remained unclear, several clues have pointed to a link to developmental mechanisms. These include the presence in the vicinity of clock CpG sites of genes that specify development, including those of the Hox (homeobox) and polycomb classes. Here we discuss how recent advances in programmatic theories of aging provide a framework within which methylation clocks can be understood as part of a developmental process of aging. This includes how such clocks evolve, how developmental mechanisms cause aging, and how they give rise to late-life disease. The combination of ideas from evolutionary biology, biogerontology and developmental biology open a path to a new discipline, that of developmental gerontology (devo-gero). Drawing on the properties of methylation clocks, we offer several new hypotheses that exemplify devo-gero thinking. We suggest that polycomb controls a trade-off between earlier developmental fidelity and later developmental plasticity. We also propose the existence of an evolutionarily-conserved developmental sequence spanning ontogenesis, adult development and aging, that both constrains and determines the evolution of aging.

Land and climate are strongly connected through multiple interface processes and climate change may lead to significant changes in land use. In this study, high-resolution observational gridded datasets are used to assess modifications in the Köppen-Geiger and Worldwide Bioclimatic (WBCS) Classification Systems, from 1950‒1979 to 1990‒2019 in Portugal. A compound Bioclimatic-Shift Exposure Index (BSEI) is also defined to identify the most exposed regions to recent climatic changes. The temporal evolution of land cover with vineyards and olive groves between 1990 and 2018, as well as correlations with areas with bioclimatic shifts, are analyzed. Results show an increase (decrease) of CSa Warm Mediterranean climate with hot summer (CSb, warm summer) of 18.1% (‒17.8%). The WBCS Temperate areas also reveal a decrease of ‒5.11%. Arid and semi-arid ombrotypes areas increased, conversely to humid to sub-humid ombrotypes. Thermotypic horizons depict a shift towards warmer classes. BSEI highlights the most significant shifts in northwestern Portugal. Vineyards have been displaced towards regions that are either the coolest/humid, in the northwest, or the warmest/driest, in the south. For oliviculture, the general trend for a relative shift towards cool/humid areas suggests an attempt of the sector to adapt, despite the cover area growth in the south. As vineyards and olive groves in southern Portugal are commonly irrigated, options for the intensification of these crops in this region may threaten the already scarce water resources and challenge the future sustainability of these sectors.

The WASP-Index is computed over Iberia for three monthly timescales in 1961-2020, based on an observational gridded precipitation dataset (E-OBS), and in 2021-2070, based on bias-corrected precipitation generated by a six-member climate model ensemble from EURO-CORDEX, under RCP4.5 and RCP8.5. The WASP performance in identifying extremely dry or wet events, reported by the EM-DAT disaster database, is assessed for 1961–2020. An overall good agreement between the WASP spatial patterns and the EM-DAT records is found. The areolar mean values revealed an upward trend in the frequency of occurrence of intermediate-to-severe dry events over Iberia, which will be strengthened in the future, particularly for the 12m-WASP intermediate dry events under RCP8.5. Besides, the number of 3m-WASP intermediate-to-severe wet events is projected to increase, mostly the severest events under RCP4.5, but no evidence was found for an increase in the number of more persistent (12m-WASP) wet events under both RCPs. Despite important spatial heterogeneities, an increase(decrease) of the intensity, duration, and frequency of occurrence of the 12m-WASP intermediate-to-severe dry(wet) events is found under both scenarios, mainly in the southernmost regions of Iberia, thus becoming more exposed to prolonged and severe droughts in the future, corroborating the results from previous studies.

The anti-money laundering (AML) process has failed both in identifying suspicious cases in due time as in assisting the AML analysts in decision making. Starting from a new generic anti-fraud approach, this article presents the main aspects related to the development of a multi-agent system that goes beyond the capture of suspicious transactions, seeking to assist the human expert in the analysis of suspicious behaviour. First, a transactional behavioural profile of clients is obtained in a data mining process. A set of rules, obtained through data mining over a real database, in conjunction with specific rules based on legal aspects and in the expertise of the AML analysts make up the agents' knowledge base. The cases for which the system was unable to suggest a decision are flagged as requiring more detailed analysis. The system analysed 6 months of real transactions and indicated several suspicious profiles, a set of these suspects was investigated by the AML analysts who proved the suspicion of several cases, including some that had not been identified by the systems in execution.

A national green planning strategy has recently been introduced in the Italian urban planning sector, aimed at making all local initiatives undertaken nationwide consistent with each other. At a regional level, Friuli Venezia-Giulia has recently implemented a Landscaping Plan, which is of an urban planning and ecological nature at an intermediate level between national and local. This article describes the local green plan of Latisana, which has been entitled Ecopolitana, given that it is represents the experimental phase, at a regional level, of the possibilities offered by landscape planning and design. Specifically, it outlines the multi-disciplinary approach used, demonstrating how landscape planning can be compared to the sustainable development of cities, with specific regard to the agricultural sector. Regarding the agricultural sector, a low-intensity cropping model is also suggested, based on the principles of agroecology and landscape ecology, which has already been implemented in the historical rural landscape of Plasencis (UD) and developed through GIS analysis and remote sensing processes. Its aim is to be the starting point for the achievement of the goals set in the 2030 Agenda, and especially Goals 13 (Climate action) and 15 (Life on land), given the current scarcity of agroecological infrastructures in the area of Latisana (UD) and the high percentage of soil used for intensive cropping.

This study aimed to investigate the healing effect of advanced platelet-rich fibrin (A-PRF) clot membranes in the reduction of palatal wounds resulting from free gingival graft (FGG) harvesting, in the re-epithelization rate and in the pain experience after surgery. Twenty-five patients requiring soft tissue augmentation (gingival recession coverage or keratinized gingiva augmentation) participated in this prospective randomized clinical study. After FGG harvesting, the test group (n=14) received A-PRF clot membranes at the palatal wound and the control group (n=11) a gelatin sponge. Epithelialization rate of the palatal wound, wound healing area, correspondent percentage of reduction and post-surgical pain experience were assessed. The follow-up period was 90 days. There was a significantly higher reduction of the palatal wound area in the A-PRF group vs. the control group, at 7 (p<0.001), 14 (p=0.009) and 30 days (p<0.001) follow-up. The maximum difference between groups was attained at 30 days (91.5% for A-PRF vs. 59.0% for the control group). At 14 days a significant difference in the proportion of patients showing total epithelization was found: 64.3% for A-PRF vs. 9.1% for the control group (p=0.012). At 90 days, both groups showed total recovery. Overall, the control group experienced a higher level of pain and discomfort until the 14th day, being significantly higher on the second day (p=0.013). The results suggest that A-PRF membranes haste the healing process by promoting a greater reduction along the recovery period and an apparent less painful postoperative period.

Evidence on adult mammalian neurogenesis and scarce studies with human brains led to the idea that adult human neurogenesis occurs in the subgranular zone (SGZ) of the dentate gyrus and in the subventricular zone (SVZ). However, findings published from 2018 rekindled controversies on adult human SGZ neurogenesis. We systematically reviewed studies published during the first decade of characterization of adult human neurogenesis (1994–2004) – when the two-neurogenic-niche concept in humans was consolidated – and compared with further studies. The synthesis of both periods is that adult human neurogenesis occurs in an intensity ranging from practically zero to a level comparable to adult mammalian neurogenesis in general, which is the prevailing conclusion. Nonetheless, Bernier and colleagues showed in 2000 intriguing indications of adult human neurogenesis in a broad area including the limbic system. Likewise, we later showed evidence that limbic and hypothalamic structures surrounding the circumventricular organs form a continuous zone expressing neurogenesis markers encompassing the SGZ and SVZ. The conclusion is that publications from 2018 on adult human neurogenesis did not bring novel findings on location of neurogenic niches. Rather, we expect that the search of neurogenesis beyond the canonical adult mammalian neurogenic niches will confirm our indications that adult human neurogenesis is orchestrated in a broad brain area. We predict that this approach may, for example, clarify that human hippocampal neurogenesis occurs mostly in the CA1-subiculum zone and that the previously identified human rostral migratory stream arising from the SVZ is indeed the column of the fornix expressing neurogenesis markers.

The prevalence of digital devices in modern society has raised concerns about the potential neg-ative effects of blue light emissions on eye health and biological rhythms. Research into blue light emissions from digital devices and their potential impact on eye health emphasizes the importance of understanding and quantifying the extent and scope of blue light emissions produced by commonly used screens (smartphones, tablets and computers). This comparative study specifically evaluates three popular Apple devices: iPhone 12 mini®, iPad Pro 12.9® and MacBook Pro®. The devices' spectral power was measured using a spectroradiometer while displaying text and a game at different brightness levels. The study also examines the effectiveness of blue-blocking lenses from well-known brands. The research highlights the importance of quantifying blue light emissions and understanding their potential impact on eye health. By doing so, appropriate measures can be developed to mitigate adverse effects on ocular structures. Above all, this research provides valuable information about the risks associated with exposure to blue light, showing that all tested devices have blue wavelength peaks between 445 nm and 455 nm. By recognizing and addressing the potential negative impacts of blue light, the risks of eye health problems can be reduced and ensure more responsible and conscious use of digital devices.

Biocomposite membranes based on polylactic acid (PLA) and cellulose nanocrystals (CNCs) were developed using a scientific approach. Dicumyl peroxide (DCP) was used as a polymerization ini-tiator, while tin octoate (Sn(Oct)2) and triphenylphosphane (P(C6H5)3) were used as catalysts. A torque rheometer was used to mix the components of the biocomposite, and thin films was prepared by solvent casting. Fourier transform infrared (FTIR) spectroscopy confirmed the coupling between the PLA and CNCs. Field emission scanning electron microscopy (FESEM) showed that the CNCs were well-dispersed in the PLA matrix with an unimodal particle size distribution and a maximum particle size of around 200 nm. Thermogravimetric analysis (TGA) and differential scanning calo-rimetry (DSC) analysis demonstrated good thermal stability and improved biodegradability of the biocomposite membrane compared to pure PLA. Mechanical characterization showed a Young's modulus of 1.65 GPa, which is comparable to that of other composite materials, and a maximum tensile strength of 20.31 MPa, which is higher than that of pure PLA. These results suggest that the developed biocomposite membrane has potential applications in water filtration, food packaging, and biomedical devices.

This retrospective study aimed to investigate the effect of known risk factors on nonsurgical periodontal treatment (NSPT) response using a pocket depth fine-tuning multilevel linear model (MLM). Thirty-seven patients (24 males and 13 females) with moderate to severe chronic periodontitis were treated with nonsurgical periodontal therapy. Follow-up visits at 3, 6, and 12 months included measurement of several clinical periodontal parameters. Data were extracted from a database system. Probing depth (PD) and Clinical Attachment Loss (CAL) reductions after NSPT in an overall of 1416 initially affected sites (baseline PD ≥ 4 mm), distributed on 536 teeth, were analyzed against known risk factors at three hierarchical levels (patient, tooth and site). The variance component models fitted to assess the three-level variance of PD and CAL decrease for each post-treatment follow-up showed that all levels contributed significantly to the overall variance (P < 0.001). Patients that underwent NSPT and were continually monitored had very curative results. All three hierarchical levels included risk factors who had impact on the to influence the magnitude of PD and CAL reduction. Specifically, the tooth’s type, surfaces involved and teeth mobility site-level risk factors showed the highest influence on these reductions, being highly relevant factors for the NSPT success.

The production of high-quality wines is one of the primary goals of modern oenology. In this regard, it is known that the potential quality of a wine begins to be determined in the vineyard, where the quality of the grape, initially, and later that of the wine, will be influenced by the soil properties. Given the spatial variability of the fundamental soil properties related to the potential grape production, such as texture, soil organic matter content, or cation exchange capacity, it seems that a uniform management of a vineyard is not the most optimal way to achieve higher grape quality. In this sense, the delineation of zones with similar soil characteristics to implement site-specific management is essential, reinforcing the interest to incorporate technologies and methods to determine these homogeneous zones. A case study was conducted in a 3.3 ha vineyard located near Évora, South of Portugal. A non-contact sensor (DUALEM 1S) was used to measure soil apparent electrical conductivity (ECa) in the vineyard, and later, a kriged ECa map was generated. ECa and elevation maps were utilised to delineate homogeneous zones (management zones, MZs) in the field through a clustering process. MZs were validated using some soil properties (texture, pH, organic matter -OM, phosphorous -P2O5, potassium -K2O, sum of the exchange bases -SEB; and cation exchange capacity -CEC) which were determined from 20 soil samples taken in the different MZs. Additionally, validation was also performed using Rasch measures, which were defined based on the formula-tion of the objective and probabilistic Rasch model, integrating the information from the afore-mentioned soil properties at each sampling location. The comparison of the MZs was more evident with the use of the Rasch model, as only one value was to be employed in each MZ. The use of ECa constitutes an efficient technological tool for implementing site-specific man-agement in viticulture, which allows for the improvement of decision-making processes by con-sidering the inherent spatial variability of the soil.

This article investigates hydraulic percolation in saturated porous media, focusing on containment systems using sheet pile walls and gravity concrete dams. The Laplace equation, which governs hydraulic flow in porous media, is solved using the Finite Element Method through the ANSYS software. The modeling of the porous media employs a planar quadratic element called Plane 55, originally used for thermal problems, composed of four nodes and one hydraulic degree of freedom per node. The numerical results of the water pressure acting on the hydraulic structure, flow rate, and hydraulic gradient at the outlet of the porous media are compared with results obtained in the technical-scientific literature using flow nets. Two different methodologies are used to obtain the rate of seepage: by using the average hydraulic velocity or by calculating the integral of the hydraulic gradient perpendicular to the flow area. Both methodologies are compared and validated in the numerical simulations. This work also demonstrates the importance of mesh refinement for obtaining the flow rate in the studied hydraulic systems.

The black soldier larvae meal (BSFLM) has been the most extensively studied insect protein source in shrimp nutrition. However, both the availability and prices of BSFLM are still a constraint for its widespread use as an ingredient in animal feeds. The present study investigated the growth and economic performance of post-larval (PL) P. vannamei fed nursery diets with a progressive replacement of fish meal (FML) for BSFLM at 0, 25, 50, 75 and 100%. These replacements corresponded to a dietary inclusion (% of the diet, as-is) of FML and BSFLM of 16.50 and 6.33%, 11.00 and 13.04%, 5.50 and 19.74%, and 0 and 26.46%, respectively. A total of 102,647 shrimp at the age of PL15 with 2.7 ± 0.2 mg body weight (BW) were stocked in fifty 1.5-m3 tanks under 1,369 PLs/m3 (2,053 ± 33 PLs/tank) and reared for 42 days. Final shrimp survival (90.5 ± 7.6%), daily weight gain (14.7 ± 1.1 mg/day), and apparent feed intake (0.67 ± 0.03 g of feed per stocked shrimp) were unaffected by dietary treatment. The highest gained yield (791 ± 52 and 776 ± 38 g/m3) and final BW (621 ± 7.2 and 632 ± 7.2 mg) were attained when FML was replaced for BSFLM at 50 and 75% with the lowest at 0% (726 ± 34 g/m3 and 598 ± 8.1 mg, respectively). Shrimp fed diets with 0 and 100% replacement of FML exhibited the highest feed conversion ratio (1.25 ± 0.04 and 1.24 ± 0.08) compared to those fed a diet with 50% (1.16 ± 0.06). At a price of USD 2.00/kg, BSFLM demonstrated a favorable ROI (Return of Investment) when compared to FML, irrespective of the replacement level. With 25 and 50% replacement, BSFLM remained cost-competitive up to 3.50 USD/kg. At 75% FML replacement, there were no significant differences in ROI with a price range of 2.00 up to 3.04 USD/kg. At full replacement, ROI dropped significantly at a BSFLM price of 2.50 USD/kg and beyond. It can be concluded that FML can be fully replaced for BSFLM in well-balanced nursery diets for P. vannamei. While the full replacement of FML for BSFLM was successfully accomplished, the competitive ROI was sustained only when the price of BSFLM did not exceed 3.04 USD/kg at its dietary highest inclusion of 19.74%. Further research may be necessary to fine-tune cost-effective inclusion levels of BSFLM to optimize the economic outcomes while considering the fluctuating prices of FML.

Additive Manufacturing (AM) has been proving suitable to support or even replace traditional manufacturing in several industries, offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and greenhouse gas (GHG) emissions. This study aimed to carry out a comparative assessment of the life cycle, from gate to gate, in the production of a low alloy carbon steel flange part using ER-90 wire. The methods utilized were Wire and Arc Additive Manufacturing (WAAM) and conventional manufacturing (CM) by forging, and comparative factors were energy demands, GHG emissions and generated solid waste. The total energy consumption in WAAM was 10,239.40 MJ, total carbon footprint in CO2 equivalent (CO2e) was 714.1 kgCO2e kg-1, and generated solid waste was 68.6 kg, respectively, 90%, 95% and 76% lower than consumption calculated in conventional manufacturing.

Individuals diagnosed with systemic arterial hypertension (SAH) are considered risk groups for COVID-19 severity. This study assessed differences in cardiac autonomic function (CAF) and functional capacity (CF) in SAH individuals without COVID-19 infection compared to SAH individuals post-COVID-19. Participants comprised 40 SAH individuals aged 31 to 80 years old, grouped as SAH with COVID-19 (G1; n=21) and SAH without COVID-19 (G2; n=19). CAF was assessed via heart rate variability (HRV), measuring R-R intervals during a 10-minute supine period. Four HRV indices were analyzed through symbolic analysis: 0V%, 1V%, 2LV%, and 2UV%. FC assessment was performed by a 6-minute walk test (6MWT). G1 and G2 showed no difference between significant age, anthropometric, clinical and medication. G2 exhibited superior 6MWT performance, covering more distance (522±78 vs. 465±59 meters, p&lt;0.05). Specifically, G2 demonstrated a moderate, positive correlation between 6MWT and the 2LV% index (r=0.58; p&lt;0.05). Shorter walking distances were observed during 6MWT in SAH individuals post-COVID-19. However, the study did not find impaired cardiac autonomic function in SAH individuals post-COVID-19 compared to those without. This suggests that while COVID-19 impacted FC, CAF remained relatively stable in this population.

Global climate change has induced a rise in sea surface temperature (SST), although this increase is not uniform across the world. Significant variations exist between coastal and offshore waters, particularly in regions affected by upwelling processes. This study focuses on the Canary Current Upwelling System (CCUS), stretching from Northwest Iberia to Northwest Africa. High-resolution remotely sensed SST data (0.05°) from the ODYSSEA Level 4 Sea Surface Temperature Reprocessed dataset were validated with in-situ measurements and employed to establish a regional climatological baseline for 1982 – 2012. Subsequent years were compared to this baseline to construct SST anomaly maps, revealing SST changes since 2012. The study area was further divided into sub-regions for comparative analysis. Results indicate that SST consistently increased at a higher rate offshore compared to the adjacent nearshore regions. A reference dataset spanning 1951 – 1981 was used to gauge SST variability between the two baselines. SST exhibited a 0.59°C increase from 1951 – 1981 to 1982 – 2012, with a slowing of SST trends beyond the 1982 – 2012 baseline. This research offers valuable insights into the climatological dynamics of the CCUS. These findings enhance our understanding of this critical coastal system's climatology, laying the groundwork for future investigations into evolving climate patterns in coastal regions.

The development of electric aircrafts is becoming an important technology for achieving the goals set by the European Commission for the reduction of gases emissions by 2050 in the aeronautical transportation system. However, there is a gap between the values of specific power in commercial electric machines and the ones required for aeronautical applications. Therefore, the search for alternative materials and non-conventional designs is mandatory. One emergent solution is using superconducting machines and systems to overcome the current limits of conventional electrical machines. This work reviews the new hybrid and all-electric aircraft tendencies, complementing it with recent research on the design and development of high specific power superconducting machines. This includes the main topologies for hybrid and all-electric aircraft, with an overview of the ongoing worldwide projects of these types of aircrafts, systematizing the main characteristics of their propulsion systems. It also includes the research on superconducting machines for the purpose of high specific power, considering the impact on the redesign of aircraft systems in the electrical, cooling, and fuel source sense.

Seismic vulnerability assessment in urban areas would in principle require the detailed modeling of each single building and the implementation of complex numerical calculations. This procedure is clearly difficult to apply at urban scale where many buildings have to be considered and therefore it is essential to have simplified, but at the same time reliable, approaches to vulnerability assessment. Among the proposed strategies, one of the most interesting concerns the application of machine learning algorithms, able to classify buildings according to their vulnerability on the basis of training procedures applied to existing datasets. In this paper machine learning algorithms will be applied to a dataset which collects and catalogs the structural characteristics of a large number of buildings and reports the damage observed in L’Aquila territory during the intense seismic activity occurred in 2009. A combination of a trained neural network and a random forest algorithm allows to identify an opportune “a-posteriori” vulnerability score, deduced from the observed damage, which is compared to an “a-priori” vulnerability one, evaluated taking into account characteristic indexes for building’s typologies. By means of this comparison an inverse approach to seismic vulnerability assessment, which can be extended to different urban centers, is proposed.

Salvia ceratophylloides (Ard.) is an endemic, rare, threatened plant species recently rediscovered in very few individuals in two different sites of South Italy. The study of within-plant variation more than among-plant one is fundamental to understand the plant adaptation to the local conditions, especially in rare species, and consequently to preserve plant biodiversity. Here, we reported the variation of the morpho-ecophysiological and metabolic traits between the sessile and petiolate leaf of S. ceratophylloides plants in two different sites for understanding the adaptation strategies for surviving in these habitats. The S. ceratophylloides individuals exhibited different net photosynthetic rate, maximum quantum yield, light intensity for the saturation of the photosynthetic machinery, stomatal conductance, transpiration rate, leaf area, fractal dimension and some VOCs between the different leaf types. This within-plant morpho-physiological and metabolic variation was depended on the site. These results provide empirical evidence of sharply within-plant variation of the morpho-physiological traits and VOCs profiles in S. ceratophylloides which could be because of adaptation to the local conditions.

Coagulation is the most sensitive step in drinking water treatment. Underdosing may not yield the required water quality, whereas overdosing may result in higher costs and excess sludge. Traditionally, the coagulant dosage is set based on bath experiments performed manually. Therefore, this test does not allow real-time dosing control, and its accuracy is subject to operator experience. Alternatively, solutions based on machine-learning (ML) have been evaluated as a computer-aided alternative. Despite these advances, there is open debate on the most suitable ML method applied to the coagulation process, capable of the most highly accurate prediction. This study addresses this gap, where a comparative analysis between ML methods was performed. As a research hypothesis, a novel data-driven fuzzy inference system (FIS) should provide the best performance due to its ability to deal with uncertainties inherent to complex processes. Although ML methods have been widely investigated, only a few studies report hybrid neuro-fuzzy systems applied to coagulation. Thus, to the best of our knowledge, this is the first study thus far to address the accuracy of this novel data-driven FIS for such application. The novel FIS provided the smallest error (0.86), indicating a promising alternative tool for real-time and highly accurate coagulant dosing in drinking water treatment.

In this paper, we introduce the application of Type-I fuzzy inference systems (FIS) as an alternative to improve the prioritization in the FMECA analysis applied in cyber-power grids. Classical FMECA assesses the risk level through the Risk Priority Number (RPN). The multiplication between three integer numbers computes this, called risk factors, representing the severity, occurrence, and detectability of each failure mode and are defined by a team of experts. The RPN does not consider any relative importance between the risk factors and may not necessarily represent the real risk perception of the FMECA team members, usually expressed by natural language; this is the main FMECA shortcoming criticized in the literature. Our approach considers fuzzy variables defined by FMECA experts to represent the uncertainty associated with the human language and a rule base consisting of 125 fuzzy rules to represent the risk perception of the experts. To test our approach, we select a cyber-power grid previously analyzed by the authors using the classical FMECA. The results reveal our proposed fuzzy approach as promissory to represent the uncertainty associated with expert knowledge and to perform an accurate prioritization of failure modes in the context of electrical power systems.

Polydimethylsiloxane (PDMS) is one of the most popular elastomers and has been used in different fields, especially in biomechanics research. Among the many interesting features of this material, its hyperelastic behaviour stands out, which allows the use of PDMS in various applications, like the ones that mimic soft tissues. However, the hyperelastic behaviour is not linear and needs detailed analysis, especially the characterization of shear strain. In this work, two approaches, numerical and experimental, were proposed to characterize the effect of shear strain on PDMS. The experimental method was implemented as a simple shear testing associated with 3D digital image correlation and was made using two specimens with two thicknesses of PDMS (2 and 4 mm). A finite element software was used to implement the numerical simulations, in which four different simulations using the Mooney-Rivlin, Yeoh, Gent, and Polynomial hyperelastic constitutive models were performed. These approaches showed that the maximum value of shear strain occurred in the central region of the PDMS, and higher values emerged for the 2 mm PDMS thickness. Qualitatively, in the central area of the specimen, the numerical and experimental results have similar behaviours and the values of shear strain are close. For higher values of displacement and thicknesses, the numerical simulation results move further away from experimental values.

This paper proposes a method based on genetic algorithm (GA) for the security-constrained optimal dispatch of integrated natural gas and electricity networks, considering operating scenarios in both energy systems. The mathematical formulation of the optimization problem consists of a multi-objective function which aims to minimize both cost of thermal generation (diesel and natural gas) as well as the production and transportation of natural gas. The joint gas-electricity system is modeled by two separate groups of nonlinear equation, which are solved by the combination of Newton's method with the GA. The applicability of the proposed method is tested in the Belgian gas network integrated with the IEEE 14-bus test system and a 15-node natural gas network integrated with the IEEE 118-bus test system. The results demonstrate that the proposed method provides efficient and secure solutions for different operating scenarios in both energy systems.

Commercial classification is essential to spatially describe commerce. Although most of the proposed classifications have been classic functional analyses, rooted on qualitative studies, some recent classifications efforts are found to rely heavily on more quantitative methods, due eventually to increasing data availability and technological advancements. In this paper, a classification is proposed, using k-means clustering and a minimal set of variables (density, diversity and clustering) to derive the commercial structure of Lisbon. The classification is implemented for 1995, 2002 and 2010, using a 150m-sided square grid. The cross-sectional analysis of the results shows the rise of shopping-malls against city centre decline and gentrification, along with changes in cluster composition considering 9 different commercial categories (6 categories of retail, and restaurants, cafes and bars). These findings are in line with literature, thus supporting the obtained classification. Since the classification can be used to accurately describe the commercial structure of the city in different time periods, it is implied that it may also be generalized to different cities. Furthermore, the potential use of cluster membership in retail location models, which is an advantage of the proposed classification, could help strengthen the relationship between location modelling and commercial classification, thus reinforcing the role of commercial studies in urban planning and policymaking.

Despite the efforts made to stop the tuberculosis (TB) epidemic, it still remains one of the leading causes of death from an infectious disease. Previous work in the group uncovered a new family of amides which showed promising activities against Mycobacterium tuberculosis. A closer look at the literature showed that these compounds are structurally related to the DNB family of DprE1 inhibitors, so, we decided to study a wide range of substituted amides and determine their activity, focusing on unexplored structures related to the dinitrobenzamides (DNB) found in the literature. To synthesize our library of compounds we started from 3,5-dinitrobenzoic acid to form the nitroaromatic core that is characteristic of the DNB’s, to which we then added linear or cyclic amine moieties. Additionally, the impact of terminal aromatic moieties was also assessed for some derivatives, via an ether, ester, or amide bond. In order to obtain the desired derivatives, multiple synthetic approaches were used, mainly focused on nucleophilic addition/elimination reactions, SN2 reactions and Mitsunobu reactions. The activity was impacted mainly by two structural features, the addition of an aromatic moiety as a terminal group and the type of the linker. The most interesting compounds exhibited activities comparable to isoniazid and DNB1. Computational studies were also performed aimed at understanding their possible interactions with DprE1. The most active compounds are a good starting point for further development, and we plan to study an extended family of compounds based in those structures.

The number of people with gluten-related illnesses has been increasing and the available treatments include the introduction of a gluten-free diet. In the bakery industry, there are problems with gluten-free products, namely the important characteristics that this component gives to doughs and the low nutritional value they present. A disease that has also increased in recent years is diabetes mellitus, which is characterized by a lack of insulin and the effectiveness of its action (type 1 diabetes) or tissue insensitivity to the hormone (type 2 diabetes). In terms of treatments, there are several approaches: inhibition of digestive enzymes (α-amylase and α-glucosidase) or techniques based on mechanisms of action (stimulation of insulin production and release, insulin transport and decreased glucose absorption). Hyperglycemia is also associated with the production of reactive oxygen species, which leads to cell apoptosis. On the other hand, there was also an association with high levels of cholesterol in the body, which contributed to the development of other types of diseases. In this sense, macroalgae have been studied as a source of natural compounds and used as food supplements, due to their protein, amino acid and mineral content, and the anti-diabetic effect in controlling the glycemic index, oxidative stress and cholesterol have already been demonstrated. Seaweed emerges as a promising source of bioactive nutraceuticals for individuals with coeliac disease, diabetes, and hyperglycemia. The rising prevalence of gluten-related illnesses calls for effective treatments, and seaweed's potential in enhancing the nutritional value of gluten-free products is noteworthy. Additionally, its demonstrated anti-diabetic effects, including glycemic index control, oxidative stress reduction, and cholesterol management, make it a valuable dietary supplement. Further research is needed to explore the specific bioactivities of seaweed compounds and their mechanisms of action. Integrating seaweed-based nutraceuticals into diets could complement traditional treatments, offering potential health benefits to those with coeliac disease and diabetes.

The purpose of this review is to provide an overview of brain arteriovenous malformations (AVMs) and focus on their management. The therapeutic options differ in each case depending on the location, size, and adjacent anatomical content of the AVM. The surgical resection by microsurgery is the preferred therapeutic option for a small and superficial AVM not related to an eloquent area (e.g., Spetzler-Martin grades I and II). On the other hand, when facing a very large AVM (e.g., Spetzler-Martin grades IV and V), the conservative and symptomatic treatment remains the most common management option due to the high risk-benefit ratio of any intervention. The management of AVMs with features between these two extremes (e.g., Spetzler-Martin grade III) remains less stablished. Stereotactic radiosurgery usually is the option for deep and small AVMs. Embolization has been usually considered before surgery for occlusion of deep arterial supplies of an AVM or to decrease its nidus size. Young patients and AVMs with compact nidus are features that weight in favor of a surgical approach. For the minority of cases that have the AVM diagnosed before bleeding the most common recommendation is to treat conservatively and particularly to avoid embolization. In summary, surgery is the gold-standard approach to cure an AVM and the choice for small AVMs located in non-eloquent area and with superficial venous drainage; large AVMs are mostly treated conservatively; the treatment of AVM with intermediate features is tailored, chosen with the guidance of classification systems, and encompasses radiosurgery and pre-operative embolization.

The Cantareira Water Producer System (CWPS), which supplies water to the most populous Brazilian region, Metropolitan Region of São Paulo (MRSP), faces significant challenges due to climate change, threatening its water security. Climate change affects the hydrological cycle affecting water availability. The CWPS is vulnerable to periods of scarcity and instability due to increased climatic variability and increasing water consumption. Current water resource management systems do not consider the impacts of climate change, making it difficult to ensure water security in the future. This study analyzes the impact of climate change on the availability of CWPS using hydrological modeling approach with forecast precipitation data by CMIP6 and assessment of existing systems. The finds will provide a comprehensive understanding of the challenges faced by CWPS in the context of climate change, as well as support strategies and adaptive measures to ensure water security for MRSP.

Natural polysaccharides, which are described in this study, are some of the most extensively used biopolymers in food, pharmaceutical and medical applications, because they are renewable and have a high level of biocompatibility and biodegradability. The fundamental understanding required to properly exploit polysaccharides potential in the biocomposite, nanoconjugate, and pharmaceutical industries is depended on detailed research of these molecules. Polysaccharides are preferred over other polymers because of their biocompatibility, bioactivity, homogeneity, and bioadhesive. Natural polysaccharides have also been discovered to have excellent rheological and biomucoadhesive properties, which may be used to design and create a variety of useful and cost-effective drug delivery systems. Polysaccharide-based composites derived from natural sources have been widely exploited due to their multifunctional properties, particularly in drug delivery systems and biomedical applications. These materials have achieved global attention and are in great demand because to their biochemical properties, which mimic both human and animal cells. Although synthetic polymers account for a substantial amount of organic chemistry, natural polymers play a vital role in a range of industries, including biomedical, pharmaceutical, and construction. As a consequence, the current study will provide information on natural polymers, their biological uses, food and pharmaceutical applications.Keywords: Polymers Biopolymers, Excipient, Natural source, Food and Pharmaceutical applications.

Meat-based diets are still the norm and vegans and vegetarians represent only a small minority of the population. A transition respectively behavioural change towards a diet with less meat can only occur with the adoption of a positive attitude towards dietary changes based on reasons and motivations. The main aim of this study is to validate the so-called meat attachment scale (MEAS) for Germany in order to analyse if this construct is a barrier towards a diet with less meat in this country. The findings show that the MEAS can be applied in Germany and a similar structure as reported for Spain and other countries could be found. Furthermore, a correlation analysis demonstrated that food neophobia and MEAS are not correlated with each other. That is, that meat attachment represents an independent and single predictor for trust in food (processing) technologies as e.g. plant-based proteins or cultured meat.

Today, dental implantology is a reliable technique for the treatment of partial and total edentulism. The fixing of dentures on dental implants can be achieved by a number of different techniques. The choice of technique depends on the specific needs of the patient, the condition of the jawbone and the design of the prosthesis itself. Currently, the two most common types of prosthetic abutment connections are cemented or screwed connections, both of which have disadvantages and ad-vantages. The aim of this study is to analyze, with Finite Element Analysis (FEA), a new Cone Morse connection system between the prosthesis and implant. The connection retention has been analyzed by adopting three different approaches: analytical, in vitro and the FEA method. The systems formed by abutment, healing-cap, and crown with three different inclination conditions were modeled in 3D: 0°, 15° and 30°. With Ansys finite element software, the effect of tilt on system retention was studied. The FEA analysis showed comparable results with in vitro studies regarding the retention strength for an abutment-cap system with a taper of 4°, obtaining 66.6 N compared to 68 N calculated through an in vitro study. The inclination of the abutment affects the retention of the system because the hole made on the surface of the abutment, decreases the contact area between the components. The Cone Morse prosthesis implant connection system is the most stable and efficient system compared to the threaded or cemented system. Retention is influenced by factors such as abutment conicity, insertion strength and the contact surface be-tween components.

In the present study, the potential of ethylene as ethephon (an ethylene source) was investigated individually or with a combination of the split dosage of nitrogen (N) and sulfur (S) soil treatments for the removal of damaging effects of salt stress (100 mM NaCl) in mustard (Brassica juncea L.). Plants were grown with 50 mg N plus 50 mg S kg−1 soil at sowing time and an equivalent dosage at 20 days after sowing ([N50 + S50]0d + [N50 + S50]20d). Ethephon at 200 μL L‒1 was applied to combined split dosage of N and S with or without NaCl. Plants subjected to NaCl showed a deceased in growth and photosynthetic characteristics as well as N and S assimilation, though, proline metabolism and antioxidants increased. The application of ethephon to plants grown with split N and S dosages significantly enhanced the photosynthetic efficiency by increasing the assimilation of N and S, improving the content of proline and induction of the antioxidant system with or without NaCl. The regulation of ethylene and/or split form N and S application may be the potential tools for overcoming salt stress effects in this species and in related Brassicaceae.

Background: the devastating outbreak of COVID-19 poses serious challenges for the diagnostics laboratories, which are often facing global shortage of reagents and equipment. With the aim of increasing the diagnostic throughput for SARS-CoV-2 molecular test, the purpose of this study was to validate an additional RNA extraction method respect to those already recommended by WHO and the US Centers for Disease Control and Prevention (CDC). Methods: a new protocol for RNA extraction from nasopharyngeal swab was set up, adapting the Qiagen RNeasy 96 plate and validated on a set of 100 clinical samples analyzed in parallel by Roche-Magnapure method (already recommended by CDC guidelines). Results: the internal control and target genes analysis showed a good agreement between the two extraction methods indicating that the two methods can be considered equivalent and that the RNeasy-adapted method can be applied for the SARS-CoV-2 diagnostics. The addition of this new extraction method resulted in a throughput increase for SARS-CoV-2 molecular test of about 2000 samples/month during the initial months of the pandemic emergency in which the lack of reagents for the extraction led to an insufficient sample processing throughput of the analysis of the swabs.

Life Cycle Assessment (LCA) is a technique developed to measure possible environmental impacts during the manufacture and use of a given product or service. Additive Manufacturing (AM) has proven to be suitable in several industries, especially wire and arc additive manufacturing (WAAM), offering many advantages such as delivery time and reduction in terms of material waste, energy consumption and equivalent CO₂ emissions (CO₂e). This study aimed to develop a methodology to evaluate environmental indicators during the life cycle assessment, from gate-to-gate, in the production of two low-alloy carbon steel metal parts (flanges) using ER-90 wire and allowed identifying the main stages that most influence environmental indicators. The total energy consumption in the production of flanges 1 and 2 were, respectively, 10,239.0 MJ, 12,754.0 MJ and the total carbon footprint, respectively, 714.1 kgCO₂e kg^-1 and 749.3 kgCO₂e kg^-1.

Beach sand may act as a reservoir for numerous micro-organisms, including enteric pathogens. Several of these pathogens originate in human or animal feces, which may pose a public health risk. In August 2019, high levels of fecal indicator bacteria (FIB) were detected in the sand of the Azorean beach Prainha, Terceira Island, Portugal. Remediation measures were promptly implemented, including sand removal and the spraying of chlorine to restore the beach sand quality. To determine the biological source of the contamination, during the first campaign, supratidal sand samples were collected from several sites along the beach, followed by microbial source tracking (MST) analyses of Bacteroides markers for five animal species, including humans. Some of the sampling sites revealed the presence of marker genes from dogs, seagulls, and ruminants. Making use of the information on biological sources originating partially from dogs, the municipality enforced restrictive measures for dog-walking at the beach. Subsequent sampling campaigns detected low FIB contamination due to the mitigation and remediation measures that were undertaken, thereby no longer requiring MST marker-gene analysis. This is the first case study where the MST approach was used to determine the contamination sources in the supratidal sand of a coastal beach. Our results show that MST can be an essential approach to determine sources of fecal contamination in the sand. This study shows the importance of holistic management of beaches that should go beyond water quality monitoring for FIB, putting forth evidence for the need for sands also to be monitored.

Polysaccharides such as alginate and gellan gum are biocompatible and easily accessible biopolymers with excellent properties to produce microparticles as drug delivery systems. However, the production methods often fail in reproducibility, compromising the translational potential of such systems. In this work, microparticles made from gellan gum and alginate were optimized using the coaxial air flow method, and an inexpensive and reproducible production method. A Design of Experiments was used to identify the main parameters that affect the microparticle’s production and optimization, focusing on the diameter and dispersibility. Airflow was the most significant factor for both parameters. Pump flow affected the diameter, whilst the gellan gum/alginate ratio affected dispersibility. After optimization, microparticle swelling, drug entrapment and release profile were analyzed at two pH, 7.4 and 6.5. Using methylene blue as a model drug, higher encapsulation and swelling indexes were obtained at pH 7.4, whilst a more pronounced release occurred at pH 6.5. The microparticle release profiles were studied by resorting to well-known models, showing a Fickian type release. The developed microparticles show promising results as drug-delivery vehicles for biomedical applications.

Soils provide important regulating ecosystem services and have crucial implications for human well-being and environmental conservation. However, soil degradation and particularly soil erosion jeopardize the maintenance and existence of these services. This study explores the spatio-temporal relationships of soil erosion to understand the distribution patterns of sediment retention services in mainland Portugal. Based on Corine Land Cover maps from 1990 to 2018, the InVEST Sediment Delivery Ratio (SDR) model was used to evaluate the influence of sediment dynamics for soil and water conservation. Spatial differences in the sediment retention levels were observed within the NUTS III boundaries, showing which areas are more vulnerable to soil erosion processes. Results indicated that the Region of Leiria, Douro and the coastal regions have decreased importantly sediment retention capacity over the years. However, in most of the territory (77.52%) changes in sediment retention were little or not important (i.e., less than 5%). The statistical validation of the model proved the consistency of the results, highlighting the usefulness of this methodology to analyse the state of soil erosion in the country. These findings can be relevant to support strategies for more efficient land use planning regarding soil erosion mitigation practices.