The use of Artificial Neural Networks (ANN) is a great contribution to medical studies since the application of forecasting concepts allows the analysis of future diseases propagations. In this context, this paper presents a study of the new coronavirus SARS-COV-2 with a focus on verifying the virus propagation associated with mitigation procedures and massive vaccination campaigns. There were proposed two methodologies to predict 28 days ahead the number of new cases, deaths, and ICU patients of five European countries: Portugal, France, Italy, United Kingdom, and Germany, and a case study of the results of massive immunization in Israel. The data input of cases, deaths, and daily ICU patients was normalized to reduce discrepant numbers due to the countries size, and the cumulative vaccination values by the percentage of population immunized, at least with one dose of vaccine. As a comparative criterion, the calculation of the mean absolute error (MAE) of all predictions presents the best methodology and targets other possibilities of use for the proposed method. The best architecture achieved a general MAE for the 1 to 28 days ahead forecast lower than 30 cases, 0,6 deaths and 2,5 ICU patients by million people.

This paper presents new perspectives of photonic technologies for capsule endoscopy. It is firstly presented a review about conventional endoscopy (upper endoscopy and colonoscopy), followed by capsule endoscopy (CE), as well as their techniques, advantages, and drawbacks. The technologies for CEs presented in this paper have the potential of integration on the existing endoscopic systems commercially available. Such technologies include narrow band imaging (NBI), photodynamic therapy (PDT), confocal laser endomicroscopy (CLE), Optical coherence tomography (OCT) and Spectroscopy in order to improve the performance of the gastrointestinal (GI) tract examination. In the context of NBI, two optical filters were designed and fabricated for integration into endoscopic capsules, allowing the visualization of light centered at the 415 nm and 540 nm. These optical filters are based on the principle of Fabry-Perot and were made of thin-films of titanium dioxide (TiO2) and silicon dioxide (SiO2). Moreover, strategies and aid solutions for the adaptation of ECs for PDT are also discussed.

This paper provides a comparative analysis of AES (Advanced Encryption Standard) and Salsa20 algorithm implementations, focusing on power consumption efficiency in passive RFID (Radio Frequency Identification) tags and ultra-low-power devices. The main objective of this work is to determine which of these algorithms is more suitable to operate in these types of devices. For this purpose, ASIC (Application-Specific Integrated Circuit) implementations of AES and Salsa20 based on low-power approaches were developed and their power consumption was evaluated. Results demonstrate that Salsa20 power consumption is lower than AES (2.82μW and 4.01μW, respectively - both in 0.18μm), indicating that Salsa20 is a better choice than AES for passive RFID tags.

Latest evidence revealed a possible association between Parkinson’s disease (PD) and periodontitis. We explored the causal relationship of this association through two-sample Mendelian randomization (MR) in European ancestry populations. To this end, we used openly accessible data of genome-wide association studies (GWAS) on PD and periodontitis. As instrumental variables for periodontitis, seventeen single-nucleotide polymorphisms (SNPs) from a GWAS of periodontitis (1817 periodontitis cases vs. 2215 controls) and forty-five SNPs from a GWAS of PD (20,184 cases and 397,324 controls). Eight non-overlapping SNPs of periodontitis from an additional GWAS assisted in the validation of association being studied. Multiple approaches of MR were carried-out. There was no evidence of genetic liability of periodontitis being associated with a higher risk of PD (B= -0.0003, Standard Error [SE] 0.0003, P = 0.26). The eight independent SNPs (B= -0.0000, SE 0.0001, P = 0.99) validated this outcome. We found no association of genetically primed PD towards periodontitis (B= -0.0001, SE 0.0001, P = 0.19). This MR study found no conclusive evidence to support a bidirectional causal genetic liability between PD and periodontitis. Further GWAS studies are needed to confirm the consistency of these results.

Recent studies supported a clinical association between Parkinson’s Disease (PD) and periodontitis. Hence, investigating possible protein interactions between these two conditions is of interest. In this study, we conducted a protein-protein network interaction analysis with recognized genes encoding proteins for PD and periodontitis. Genes of interest were collected via GWAS database. Then, we conducted a protein interaction analysis using STRING database, with a highest confidence cut-off of 0.9. Our protein network casted a comprehensive analysis of potential protein-protein interactions between PD and periodontitis. This analysis may underpin valuable information for new candidate molecular mechanisms between PD and periodontitis and may serve new potential targets for research purposes. These results should be carefully interpreted giving the limitations of this approach.

Deep-Brain Stimulation (DBS) is a a highly effective and safe medical treatment that improves the lives of patients with a wide range of neurological and psychiatric deceases, and has been consolidated as a first-line tool in the treatment of these conditionsin the last two decades. Closed Loop Deep-Brain Stimulation (CLDBS) pushes this tool further by automatically adjusting the stimulation parameters to the brain response in real time. In this context, this paper presents a Low-Noise Amplifier (LNA) and a Neurostimulator circuits fabricated in the low-power/low-voltage 65 nm CMOS process from the TSMC, which were designed targeting implantable applications. To achieve the best trade-off between input-referred noise and power consuption, metaheuristic algorithms were employed to determine and optimizes the dimentions of the LNA devices during the design phase. The measurement results showed that the LNA had a gain of 40.6 dB, a 3 dB bandwidth spanning over three decades from 10 Hz to 8.6 kHz, and a power consumption of 6.19 uW. Simulations results indicated an input-referred noise of 4.86 uVrms for the LNA. The circuit of the Neurostimulator is a programmable Howland Current-Pump, whose measurements showed its ability to generate currents with arbitrary shapes ranging from between 325 uA to +318 uA. The simulations showed a quiescent power consumption of 0.13 W with a zero neurostimulation current. The LNA and the Neurostimulator circuits are supplied with 1.2 V voltage and occupy a microdevice area of 145 um x 311 um and 88 um x 89 um, respectively, making them suitable for implantation in applications involving Closed Loop Deep-Brain Stimulation.

The advantage of FPGAs lies in the ability to implement a fully hardware solution for interfacing with various input/output (I/O) devices. Each block can work in parallel with all the others, simplifying the satisfaction of timing constraints. However, this hardware utilization consumes FPGA resources that could otherwise be allocated to the primary project. An alternative involves employing a small "soft-core" processor implementing I/O in software. With the goal to design and evaluate a new tiny soft-core processor optimized for FPGA resources in I/O , a novel processor named Baby8 is developed. It is an 8-bit CISC soft-core processor optimized for reduced FPGA resources including program size for 8-bit applications. The number of instructions is not large but any instruction can access arbitrary memory locations. The performance and resource utilization of the newly designed processor are evaluated and compared with a variety of other soft-core processors. The results demonstrate its competitive performance, achieving an average maximum clock frequency of approximately 57 MHz and a power consumption of around 2mW. Furthermore, it conserves nearly half of the FPGA resources in implementation.

Introduction: The purposes of this study were to seek for overall ratio (OR) and anterior ratio (AR) patients data in normal occlusion and Angle’s malocclusion studies, and to assess if such results support Bolton’s standards as general references. Methods: Pubmed, Medline, CENTRAL and Scholar databases were searched up to February 2018 (CRD42018088438). Gray literature was explored through OpenGray. Non-randomized clinical studies, published in English and assessing Bolton’s OR and AR in normal occlusion and Angle’s malocclusion groups (Class I, Class II, Class II division 1, Class 2 division 2, Class III) patients were included. OR and AR means and standard deviations (SD) were collected. Potential covariates (study design, publication year, country where the study was conducted, number of cases, gender, mesiodistal measurement method, and calibration method) were also extracted. The National Health Heart Lung, and Blood Institute’s Quality Assessment Tool for Observational Cohort and Cross-Sectional Studies was used to assess each included studies quality. Pairwise Random-Effects and Multilevel Bayesian Network Meta-Analyses were used to synthesize available data. Results: Fifty-two observational studies were included (8872 participants; male/females 2674/3272; 16 studies lacked gender information). For normal occlusion, global pooled estimates for OR and AR means were 91.74% (95% CI: 91.37-92.10) and 78.24% (95% CI: 77.85-78.63), respectively. We could identify on Angle’s Class III patients meaningful OR and AR mean deviations from normal occlusion (0.89, 95% credible interval [CrI], 0.66-1.12, and 0.66, 95% CrI, 0.38-0.94, respectively), while on Class I patients we found a meaningful mean deviation from normal occlusion only for OR (0.25, 95% CrI, 0.03-0.47). Concerning gender impact, male patients presented higher OR (0.30, 95% CI 0.00-0.59) and AR (0.41, 95% CI 0.00-0.83) mean values than females in Class I. Conclusions: The results show that global pooled OR and AR mean values for normal occlusion patients are slightly above Bolton’s original values. Class I, for OR mean values, and Class III, for both OR and AR, are proportionally larger than normal occlusion patients. Gender had almost no impact on teeth mesiodistal proportion.

Then the purposes of this study were to compare and correlate the aerobic threshold (TH_aer) and anaerobic threshold (TH_anaer) measured during a new single judo specific incremental test and Treadmill Test for aerobic demand evaluation. Eight well-trained male competitive judo players (24.3±7.9 years; height of 169.3±6.7cm; fat mass of 12.7±3.9%) performed a maximal incremental specific test for judo mimicking the UchiKomi drills and on treadmill in different days. There was difference between specific and general TH_aer (P=0.0006) as well as weak correlation for TH_aer (r=0.32; R²=0.1; P=0.2) and TH_anaer (rs=-0.31; R²=0.1; P=0.12). When correlation was applied with normalized data (percentage of peak load) we observed moderate correlation for TH_aer (r=0.76; R²=0.58; P=0.027), but the same was not observed for TH_anaer. We conclude that there is a need of TH_aer and TH_anaer evaluation through a specific test for Judo.

In his best-selling book An Introduction to Probability Theory and its Applications, W. Feller established a way of ending the St. Petersburg Paradox by the introduction of an entrance fee, and provided it for the case in which the game is played with a fair coin. A natural generalization of his method is to establish the entrance fee for the case in which the probability of head is θ (0 < θ < 1/2). The deduction of those fees is the main result of Section 2. We then propose a Bayesian approach to the problem. When the probability of head is θ (1/2 < θ < 1) the expected gain of the St. Petersburg Game is finite, therefore there is no paradox. However, if one takes θ as a random variable assuming values in (1/2,1) the paradox may hold, what is counter-intuitive. On Section 3 we determine a necessary and sufficient condition for the absence of paradox on the Bayesian approach and on Section 4 we establish the entrance fee for the case in which θ is uniformly distributed in (1/2,1), for in this case there is paradox.

In this paper, we introduce the application of Type-I fuzzy inference systems (FIS) as an alternative to improve the prioritization in the FMECA analysis applied in cyber-power grids. Classical FMECA assesses the risk level through the Risk Priority Number (RPN). The multiplication between three integer numbers computes this, called risk factors, representing the severity, occurrence, and detectability of each failure mode and are defined by a team of experts. The RPN does not consider any relative importance between the risk factors and may not necessarily represent the real risk perception of the FMECA team members, usually expressed by natural language; this is the main FMECA shortcoming criticized in the literature. Our approach considers fuzzy variables defined by FMECA experts to represent the uncertainty associated with the human language and a rule base consisting of 125 fuzzy rules to represent the risk perception of the experts. To test our approach, we select a cyber-power grid previously analyzed by the authors using the classical FMECA. The results reveal our proposed fuzzy approach as promissory to represent the uncertainty associated with expert knowledge and to perform an accurate prioritization of failure modes in the context of electrical power systems.

The accumulation of brown algae from the genus Sargassum has been increasing over the years in coastal regions of the Caribbean, Africa, Brazil, and Mexico. This causes harmful effects to the ecosystem, health, economy, and climate due to gas emissions from its decomposition process. There is the possibility of this biomass being reused in civil construction, and few studies have been carried out on its application to common Portland cement mortar. As such, the objective of this study is to evaluate the potential of sargassum ash as a mineral addition to partial replacement of fine aggregates in Portland cement mortar. Characterizations of the raw materials were carried out through X-ray fluorescence spectroscopy, loss on ignition, particle size distribution, Brunauer–Emmett–Teller (BET), real density, X-ray diffraction, scanning electron microscopy, and dispersion spectroscopy of electrons. The mortars were prepared by partially replacing the fine aggregate (sand) with sargassum ash, at 0%, 5%, 10% and 20%. Mortar performance was evaluated through water absorption, apparent porosity, apparent specific mass, compressive strength after 7, 28, and 63 days after curing. Lastly, a life cycle assessment in accordance with ISO standards 14040:2006 and 14044:2006. The results showed that replacing sand with sargassum ash increases water absorption, apparent porosity, and decreases the apparent specific mass and compressive strength as replacement increases. Nevertheless, the compressive strength results after 63 days, for 5 and 10% replacement did not differ statistically from reference values. The life cycle assessment indicates that mortars with partial replacement of sand by sargassum ash showed positive environmental impacts when compared to reference values for most categories regardless of the scenario analyzed, especially for mortar with 10% replacement. As such, the use of sargassum ash at 10% does not alter compressive strength values after 63 days while reducing its environmental impact. The application of this biomass in civil construction materials provides a destination for this algae that has been causing several social, environmental, and economic problems.

This paper proposes a method based on genetic algorithm (GA) for the security-constrained optimal dispatch of integrated natural gas and electricity networks, considering operating scenarios in both energy systems. The mathematical formulation of the optimization problem consists of a multi-objective function which aims to minimize both cost of thermal generation (diesel and natural gas) as well as the production and transportation of natural gas. The joint gas-electricity system is modeled by two separate groups of nonlinear equation, which are solved by the combination of Newton's method with the GA. The applicability of the proposed method is tested in the Belgian gas network integrated with the IEEE 14-bus test system and a 15-node natural gas network integrated with the IEEE 118-bus test system. The results demonstrate that the proposed method provides efficient and secure solutions for different operating scenarios in both energy systems.

In our study, we investigated the prognostic significance of hematological markers—NLR (Neutrophil-to-Lymphocyte Ratio), PLR (Platelet-to-Lymphocyte Ratio), and RDW-CV (Red Blood Cell Distribution Width - Coefficient of Variation)—in 117 glioblastoma patients. Data collected from January 2016 to December 2018 included demographics, clinical scores, and treatment regimens. Unlike previous research, which often examined these markers solely before surgery, our unique approach analyzed them at multiple stages: preoperative, postoperative, and before adjuvant therapies. We correlated these markers with overall survival (OS) and progression-free survival (PFS) using statistical tools, including ANOVA, Cox regression, and Kaplan-Meier survival analyses, employing SPSS version 29.0. Our findings revealed notable variations in NLR, PLR, and RDW-CV across different treatment stages. NLR and PLR decreased after surgery, with some stabilization post-STUPP phase (NLR: p=0.007, η2p=0.06; PLR: p=0.001, η2p=0.23), while RDW-CV increased post-surgery and during subsequent treatments (RDW-CV: p &lt; 0.001, η2p=0.67). Importantly, we observed significant differences between the preoperative phase and other treatment phases. Additionally, higher NLR and RDW-CV at the second-line treatment and disease progression were associated with an increased risk of death (NLR at 2nd line: HR=1.03, p=0.029; RDW-CV at progression: HR=1.14, p=0.004). We proposed specific marker cutoffs that demonstrated significant associations with survival outcomes when applied to Kaplan-Meier survival curves (NLR at 2nd line &lt; 5: p&lt;0.017; RDW-CV at progression &lt; 15: p=0.007). Elevated NLR and RDW-CV at later treatment stages correlated with poorer OS and PFS. No significant preoperative differences were detected. These biomarkers may serve as non-invasive tools for glioblastoma management.

Deep brain stimulation (DBS) is an effective and safe medical treatment that improves the lives of patients with a wide range of neurological and psychiatric diseases, and has been consolidated as a first-line tool in the last two decades. Closed loop deep brain stimulation (CLDBS) pushes this tool further by automatically adjusting the stimulation parameters to the brain response in real-time. This paper presents a CLDBS with 2 stimulation channels and 2 acquisition channels. Each channel has a low-noise amplifier (LNA) buffer in differential configuration to eliminate the DC signal component of the input. Energy management is efficiently done by the control and communication unit. The battery supports almost 9 hours with both the acquisition and stimulation circuits active. If only the stimulation circuit is used as an Open Loop DBS (OLDBS), the battery can hold sufficient voltage for 24 hours of operation. The whole system is low-cost and portable and therefore it could be used as a wearable.

With the rising trends in elderly populations around the world, there is a growing interest in understanding how climate sensitivity is related to their thermal perception. Therefore, we analyzed the associations between mortality in the elderly due to cardiovascular (CVD) and respiratory diseases (RD) and meteorological variables, for three cities in the State of São Paulo, Brazil: Campos do Jordão, Ribeirão Preto and Santos, from 1996 to 2017. We applied the Autoregressive Model Integrated with Moving Average (ARIMA) and the Principal Component Analysis (PCA) in order to evaluate statistical associations. Results showed CVD as a major cause of mortality, particularly in the cold period, when a high mortality rate is also observed due to RD. The mortality rate was higher in Campos do Jordão and lower in Santos (and intermediate values in Ribeirão Preto). Campos do Jordão results indicate an increased probability of mortality from CVD and RD due to lower temperatures. In Ribeirão Preto, the lower relative humidity may be related to the increase in CVD and RD deaths. This study emphasizes that, even among subtropical climates, there are significant differences. Therefore, this can assist decision makers in the implementation of mitigating and adaptive measures.

Oral health involves physiological functions related to mouth, teeth and orofacial structures, but also includes psychological and social dimensions. In this sense, oral health is an integrated part of human general health and well-being. Our aim was to access and evaluate the general oral health status of a high- and elite-level sample of Portuguese athletes from different sports. One hundred and sixteen participants were examined regarding their dental relationships, teeth and periodontal health, the presence of parafunctional activities (bruxism), and current or past orthodontic treatment. Our sample were predominantly adolescents and young adults, including 54 high-level and 62 elite subjects (71 males and 45 males) from 11 different sports, but mainly from swimming and athletics. Most sport performers presented with normocclusion (77%), despite the presence of other sagittal, transverse and vertical malocclusions. Twenty-three participants were affected by dental caries and six had missing teeth. Gingivitis (~40%) and dental calculus (~30%) were presented in our sample. Bruxism signs (47%) and current or past orthodontic treatment (~22%) were also found. Oral health conditions are not under control among high- and elite-level athletes, supporting the importance of healthcare needs and oral health promotion strategies in sports.

Polysaccharides such as alginate and gellan gum are biocompatible and easily accessible biopolymers with excellent properties to produce microparticles as drug delivery systems. However, the production methods often fail in reproducibility, compromising the translational potential of such systems. In this work, microparticles made from gellan gum and alginate were optimized using the coaxial air flow method, and an inexpensive and reproducible production method. A Design of Experiments was used to identify the main parameters that affect the microparticle’s production and optimization, focusing on the diameter and dispersibility. Airflow was the most significant factor for both parameters. Pump flow affected the diameter, whilst the gellan gum/alginate ratio affected dispersibility. After optimization, microparticle swelling, drug entrapment and release profile were analyzed at two pH, 7.4 and 6.5. Using methylene blue as a model drug, higher encapsulation and swelling indexes were obtained at pH 7.4, whilst a more pronounced release occurred at pH 6.5. The microparticle release profiles were studied by resorting to well-known models, showing a Fickian type release. The developed microparticles show promising results as drug-delivery vehicles for biomedical applications.

This systematic review investigates the failure rate and marginal bone loss (MBL) of dental implants placed in Solid-organ transplant (SOT) patients compared to healthy controls. Three databases (PubMed, Web of Sciences and the Cochrane Library) were searched up to June 2020 (PROSPERO CRD42019124896). Case-control and cohort studies reporting data failure rate and marginal bone loss (MBL) of dental implants placed in SOT patients were included. The risk of bias of observational studies was assessed through the Newcastle-Ottawa Scale (NOS). Four case-control studies fulfilled the inclusion criteria, all of low risk of bias. Meta-analyses revealed consistently lower implant failure rate than control populations at patient and implant levels. SOT patients had a significant difference of -18% (p-value <0.001) of MLB towards healthy patients. SOT status poses no serious threat to implant survival. Overall, this group of patients presented lower levels of dental implant failure rate and marginal bone loss compared to otherwise healthy patients. Further intervention trials with wider sample size and longer follow-ups are necessary to confirm these summary results.

The clinical interaction between stroke and periodontitis has been consistently studied and confirmed. Hence, forecasting potentially new protein interactions in this association using bioinformatic strategies presents potential interest. In this exploratory study, we conducted a protein-protein network interaction (PPI) search with documented encoded proteins for both stroke and periodontitis. Genes of interest were collected via GWAS database. The STRING database was used to predict the PPI networks, first in a sensitivity purpose (confidence cut-off of 0.7), and then with a highest confidence cut-off (0.9). Genes over-representation was inspected in the final network. As a result, we foresee a prospective protein network of interaction between stroke and periodontitis. Inflammation, pro-coagulant/pro-thrombotic state and ultimately atheroma plaque rupture is the main biological mechanism derived from the network. These pilot results may pave the way to future molecular and therapeutic studies to further comprehend the mechanisms between these two conditions.

Reliability assessment in traditional power distribution systems has played a key role in power system planning, design, and operation. Recently, new information and communication technologies have been introduced in power systems automation and asset management, making the distribution network even more complex. In order to achieve efficient energy management, the distribution grid has to adopt a new configuration and operational conditions that are changing the paradigm of the actual electrical system. Therefore, the emergence of the cyber-physical systems concept to face future energetic needs requires alternative approaches for evaluating the reliability of modern distribution systems, especially in the smart grids environment. In this paper, a reliability approach that makes use of failure modes of power and cyber network main components is proposed to evaluate risk analysis in smart electrical distribution systems. We introduce the application of Failure Modes and Effects Analysis (FMEA) method in future smart grid systems in order to establish the impact of different failure modes on their performance. A smart grid test system is defined and failure modes and their effects for both power and the cyber components are presented. Preventive maintenance tasks are proposed and systematized to minimize the impact of high-risk failures and increase reliability.

This retrospective study aimed to investigate the effect of known risk factors on nonsurgical periodontal treatment (NSPT) response using a pocket depth fine-tuning multilevel linear model (MLM). Thirty-seven patients (24 males and 13 females) with moderate to severe chronic periodontitis were treated with nonsurgical periodontal therapy. Follow-up visits at 3, 6, and 12 months included measurement of several clinical periodontal parameters. Data were extracted from a database system. Probing depth (PD) and Clinical Attachment Loss (CAL) reductions after NSPT in an overall of 1416 initially affected sites (baseline PD ≥ 4 mm), distributed on 536 teeth, were analyzed against known risk factors at three hierarchical levels (patient, tooth and site). The variance component models fitted to assess the three-level variance of PD and CAL decrease for each post-treatment follow-up showed that all levels contributed significantly to the overall variance (P < 0.001). Patients that underwent NSPT and were continually monitored had very curative results. All three hierarchical levels included risk factors who had impact on the to influence the magnitude of PD and CAL reduction. Specifically, the tooth’s type, surfaces involved and teeth mobility site-level risk factors showed the highest influence on these reductions, being highly relevant factors for the NSPT success.

The black soldier larvae meal (BSFLM) has been the most extensively studied insect protein source in shrimp nutrition. However, both the availability and prices of BSFLM are still a constraint for its widespread use as an ingredient in animal feeds. The present study investigated the growth and economic performance of post-larval (PL) P. vannamei fed nursery diets with a progressive replacement of fish meal (FML) for BSFLM at 0, 25, 50, 75 and 100%. These replacements corresponded to a dietary inclusion (% of the diet, as-is) of FML and BSFLM of 16.50 and 6.33%, 11.00 and 13.04%, 5.50 and 19.74%, and 0 and 26.46%, respectively. A total of 102,647 shrimp at the age of PL15 with 2.7 ± 0.2 mg body weight (BW) were stocked in fifty 1.5-m3 tanks under 1,369 PLs/m3 (2,053 ± 33 PLs/tank) and reared for 42 days. Final shrimp survival (90.5 ± 7.6%), daily weight gain (14.7 ± 1.1 mg/day), and apparent feed intake (0.67 ± 0.03 g of feed per stocked shrimp) were unaffected by dietary treatment. The highest gained yield (791 ± 52 and 776 ± 38 g/m3) and final BW (621 ± 7.2 and 632 ± 7.2 mg) were attained when FML was replaced for BSFLM at 50 and 75% with the lowest at 0% (726 ± 34 g/m3 and 598 ± 8.1 mg, respectively). Shrimp fed diets with 0 and 100% replacement of FML exhibited the highest feed conversion ratio (1.25 ± 0.04 and 1.24 ± 0.08) compared to those fed a diet with 50% (1.16 ± 0.06). At a price of USD 2.00/kg, BSFLM demonstrated a favorable ROI (Return of Investment) when compared to FML, irrespective of the replacement level. With 25 and 50% replacement, BSFLM remained cost-competitive up to 3.50 USD/kg. At 75% FML replacement, there were no significant differences in ROI with a price range of 2.00 up to 3.04 USD/kg. At full replacement, ROI dropped significantly at a BSFLM price of 2.50 USD/kg and beyond. It can be concluded that FML can be fully replaced for BSFLM in well-balanced nursery diets for P. vannamei. While the full replacement of FML for BSFLM was successfully accomplished, the competitive ROI was sustained only when the price of BSFLM did not exceed 3.04 USD/kg at its dietary highest inclusion of 19.74%. Further research may be necessary to fine-tune cost-effective inclusion levels of BSFLM to optimize the economic outcomes while considering the fluctuating prices of FML.

Lophomonas are flagellated protozoa which have been increasingly associated with upper and lower airway infection in humans. The prevalence and characterization of this disease in the critically ill remains poorly understood. We present a series of eleven ICU patients with confirmed Lophomonas spp. identification in respiratory samples.

Our aim was to determine the secondary antibody deficiency profiles of patients in a mesoregion of São Paulo state, Brazil, focusing on infectious diseases. Demographic characteristics, clinical and laboratory data were obtained from electronic files; infections were classified as organ-specific and graded as mild, moderate, life-threatening, and fatal. Non-Hodgkin lymphoma (NHL) accounted for 30% of patients, nephrotic syndrome (NS) 25%; chronic lymphocyte leukemia 20%, and multiple myeloma 15%. Patients with NS were younger than those in other groups, and hypo-γ-globulinemia was detected in 94.1%, IgG <400 mg/dL in 60.0%, IgA <40 mg/dL in 55.0%, and CD19 <20 cells/mm³ in 30.0%. One hundred and one infections were found; 82.1% were classified as mild or moderate, 7.9% as life-threatening, and 1.9% as fatal. Respiratory tract infections were more prevalent (41.5%), and pneumonia accounted for 19.8%. Lower levels of infections were found in patients with NS compared with NHL (P=0.0001). Most patients progressed to hypo-γ-globulinemia and secondary antibody deficiency after treatment with immunosuppressants, and mild and moderate infections were predominant. These therapies are increasing in patients with different diseases, therefore monitoring hypo-γ-globulinemia and infections may help to identify patients at high risk for severe complications, antibiotic prophylaxis or treatment, and immunoglobulin replacement

Count data analysis presents unique challenges due to its discrete nature, often exhibiting excessive zeros and overdispersion. To address these complexities, count models, such as Poisson regression and Negative Binomial regression, have been developed, enabling modeling and prediction of count-based phenomena. Additionally, it’s important to notice that zero inflation, a phenomenon commonly observed in count data, requires specialized techniques for robust analysis. This article provides an overview of count data and count models, explores zero inflation, introduces Likelihood Ratio Tests, and explains how the Vuong Test can be used as a model selection criteria. Furthermore, we created a Vuong Test implementation from scratch using the Python programming language. This implementation enhances the accessibility and applicability of the Vuong Test in real-world scenarios, providing a valuable contribution to the academic community, since Python didn’t have an implementation of this statistical test.

Zika virus (ZIKV) is a notable arbovirus with maternal, sexual, and TORCH-related transmission capabilities. After 2015, Brazil had the highest number of ZIVK-infected pregnant women who lost their babies or delivered them with Congenital ZIKV Syndrome (CZS). ZIKV infection has been linked to variations in endogenous retroviruses (ERVs) and interleukins within the placenta. ERVs, remnants of ancient viral infections integrated into the genome, include syncytin receptors crucial for placental development. Interleukins, immune response regulators, aid immune tolerance and support syncytial structure development in the placenta, where syncytin receptors facilitate vital cell-to-cell fusion events. Since ZIKV can infect trophoblast cells, we investigated the relationship between ZIKV infections and ERV and interleukin modulations. Investigating the impact of ZIKV on trophoblast cells, we examined two cell types (BeWo and HTR8) infected with ZIKV-MR766 (African) and ZIKV-IEC-Paraíba (Asia-Brazilian) using Taqman and RT2 Profiler PCR Array assays. While early ZIKV infection (24-48 hours) did not induce differential ERV and interleukin expression, future studies involving additional trophoblastic cell lineages and extended infection timelines will illuminate the dynamic interplay between ZIKV, HERVs, interleukins, and cytokines essential for placental formation and function.

Leisure-time physical activity (LTPA) is associated with access and use of public open spaces. The “President João Goulart Elevated Avenue” and current denominated “Minhocão” is a facility for leisure activities that are open for people during the night/weekends. The aim of this study was to examine if the prevalence of LTPA among individuals living in the surroundings of Minhocão is different according to proximity to, and use of, the facility. We conducted a cross-sectional study with cluster sampling with people aged ≥18 years who lived in households until 500m and between 501m to 1500m of Minhocão. The survey was conducted between December/2017 until March/2019 with an electronic questionnaire self-responded. We conducted bivariate analysis and Poisson regression to examine possible differences in LTPA according to the proximity of residences and use of Minhocão. The analysis used post-stratification weights. A total of 12,030 telephone numbers of people were drawn (≤500m = 6,942; and &gt;500m to ≤1500m = 5,088). The final sample analyzed were of 235 residents who returned the questionnaires. There was a higher prevalence of individuals engaging in at least 150 minutes per week of LTPA among users than non-users (Prevalence Ratio=2.23, IC95%1.72-2.90). People who used the park had higher prevalence of all types of LTPA than non-users. The results can serve to inform government decision-making on the future of Minhocão.

The maturation process of Arabica coffee fruits is influenced by plant endogenous and external factors. The maturation stage of the fruits affects the bean's chemical composition, which is related to coffee beverage quality. During fruit maturation, the colour of the peel changes from green to red (cherry), which indicates the harvest time and supposedly that the fruits have high quality. However, many tones of red may define fruit maturity. This work aimed to study the dynamics of soluble sugar accumulation related to fruit redness in coffee fruit tissues. We classified the ripe fruits into six ripeness classes based on the intensity of the red colour of the epicarp using a colourimeter. Total soluble sugar, sucrose and starch were analyzed in the coat (exocarp+mesocarp), coat juice (obtained by squeezing the coat), and beans. We showed that endosperm sugar dynamics do not follow changes in the coat, indicating a separate control of sugar accumulation, mainly related to sucrose, an essential component of coffee quality. Our data show that there is no transfer of sucrose and reducing sugars from the red coat to the bean.

There have been beaching events of the marine alga pelagic sargassum in coastal regions of the Caribbean Sea, West African countries, and the north-northeast region of Brazil since 2011. Its presence has caused environmental and socioeconomic impacts while several studies were conducted in order to understand the causes of this phenomenon, as well as alternatives to mitigate its impacts. The objective of this research was to evaluate pelagic sargassum biomass as a raw material for the manufacture of medium-density multilayer particleboards. These are composed of 30% sargassum particles in their inner layer and 70% sugarcane bagasse particles on their outer layers which are bonded with castor oil-based polyurethane resin. A physical and chemical characterization was carried out in order to evaluate sargassum particles while physical and mechanical tests were carried out in order to evaluate the panels. Results were subsequently compared with indications from NBR 14810-2:2018 and ISO 16893:2016 standards. A life cycle assessment based on ISO 14040:2006 and 14044:2006 was carried out as to complement the feasibility study of these panels and to compare their different manufacturing processes. The multilayer panels met the minimum requirements for physical and mechanical properties established by regulations, indicating that the Sargassum spp. biomass can be used as filling. The life cycle assessment study indicates that sargassum panels produced in the Belém-PA-Brazil region present lower environmental impacts in four of seven evaluated categories when compared to conventional panels. As such, they constitute an alternative way to mitigate environmental impacts generated by beaching events.

We are witnessing a progressive divestment of some institutions with strong traditions and skills in physical modelling and their consequent impoverishment, to the detriment of numerical modelling. For many reasons, the economic imperatives and the exponential growth of computational means and numerical methods should certainly not be excluded. In this work, we aimed to highlight the new requirements of the recent sophisticated developments in physical modelling, precisely due to the new needs imposed on them by mathematical and numerical modelling and the growing risks in civil construction works. In this context, reflections are reported, justified by scientific and real-world examples, on the need for maintenance and reinforcement of investments in physical modelling, both to support the scientific community and to design buildings of significant economic, social and environmental impact.

The study of velocimetry is important for characterizing and comprehending the effects of fluid flow, and the Particle Image Velocimetry (PIV) technique is one of the primary approaches for understanding the velocity vector field in a test section. Commercial PIV systems are expensive, with one of the main cost factors being high-speed camera equipment capable of capturing images at high frames per second (fps), rendering them impractical for many applications. This study proposes an evaluation of utilizing smartphones as image acquisition systems for PIV technique application. An experimental setup inspired by the known angular displacement of synthetic particles is proposed. A stepper motor rotates a plate containing an image of synthetic particles on its surface. The motion of the plate is captured by the smartphone camera, and the images are processed using PIVlab-MatLab® software. The use of two smartphones is assessed, with acquisition rates of either 240 fps or 960 fps and varying angular velocities. The results were satisfactory for velocities up to 0.7 m/s at an acquisition rate of 240 fps and up to 1.8 m/s at 960 fps, validating the use of smartphones as a cost-effective alternative for the PIV technique.

Composite biomaterials that combine osteoconductive and osteoinductive properties are a promising approach for bone tissue engineering (BTE) since it allows osteogenesis stimulation while mimicking the extracellular matrix (ECM) morphology. In this context, the aim of the present research work was to produce polyvinylpyrrolidone (PVP) nanofibers containing mesoporous bioactive glass (MBG) 80S15 nanoparticles. These composite materials were produced by electrospinning technique. The design of experiments (DOE) was used to estimate the optimal electrospinning parameters to reduce average fiber diameter. The polymeric matrices were thermally crosslinked under different conditions, and the fiber’s morphology was studied using scanning electron microscopy (SEM). Evaluation of the mechanical properties of nanofibrous mats revealed a dependence on thermal crosslinking parameters and on the presence of MBG 80S15 particles inside the polymeric fibers. Degradation tests indicated that the presence of MBG led to a faster degradation of nanofibrous mats. On the other hand, MBG presence also leads to higher swelling capacity. The assessment of in vitro bioactivity in simulated body fluid (SBF) was performed in MBG pellets and PVP/MBG (1:1) composites to assess whether the bioactive properties of MBG 80S15 were kept when it was incorporated into PVP nanofibers. FTIR and XRD analysis along with SEM–EDS results indicated that a hydroxy-carbonate apatite (HCA) layer was formed on the surface of MBG pellets and nanofibrous webs after soaking in SBF over different time periods. In general, the materials revealed no cytotoxic effects on Saos-2 cell line. The overall results for the produced materials show the potential of the composites to be used in BTE.

We are experiencing an unprecedented urbanization process that alongside with physical, social and economic developments is having a significant impact on population’s health. Due to higher apprehensions of pollution, violence and poverty, our modern cities no longer ensure a good quality of life so they become unhealthy environments. This study aims to measure the socio-environmental and hematologic profile of residents of Santo André’s landfill – “Bairro Espírito Santo” by using the contextualization of the studied area. The research method is Observational type and from Retrospective cohort and by convenience sampling in Santo André in the Greater ABC region. The study determined a socio environmental profile and the hematologic diseases screening related to a close location to the landfill. The disease manifests itself within a broad spectrum of symptoms that causes changes in blood count parameters. The full blood counts analysis was performed, indicating that the blood counts of residents living near the landfill led to positive hematological changes and diseases like Leukopenia, Anemia, Neutropenia and lymphocytosis were the most common changes. However it is considered that the proof of the relation of cause- effect to environmental exposures that may trigger chronic manifestations in humans requires specific studies that are often complicated.

Solar concentrator photovoltaic collectors are able to deliver energy at higher temperatures for the same irradiances, since they are related to smaller areas for which heat losses occur. However, to ensure the system reliability, adequate collector geometry and appropriate choice of the materials used for all their components will be crucial. The present study focuses on the re-design of the C-PV collector reflector currently produced by the Swedish company Solarus AB, together with a comparative analysis based on the annual assessment of the solar irradiance in the collector. An open-source ray tracing code (Soltrace) is used to accomplish the modelling of optical systems in concentrating solar power applications. Symmetric parabolic reflector configurations are seen to improve the PV system performance when compared to the conventional structures currently used by Solarus. The parabolic geometries, using either symmetrically or asymmetrically placed receivers inside the collector, achieve both the performance and cost-effectiveness objectives: for almost the same area or costs, the new proposals for the PV system may be in some cases 70 % more effective as far as energy output is concerned.

This study employed e-Vol DX cone beam computed tomography (CBCT) software to assess dentin remnants in the furcation area of mesial canals in mandibular molars during root canal retreatment (RCR). Four groups (Reciproc®, ProTaper Next®, Race Evo®, Protaper Gold®) were subjected to RCR, and CBCT images were captured before (T1) and after (T2) treatment. Measurements of remaining dentin thickness at 1 mm and 3 mm below the furcation were scrutinized. Results revealed no significant differences in mean thicknesses of mesiobuccal (MB) and mesiolingual (ML) canals at 1 mm and 3 mm from the furcation pre-treatment (T1). Post-treatment (T2) showed analogous findings, with no significant differences in mean thicknesses. However, disparities surfaced between MB and ML canals at both distances, both before and after retreatment. In essence, the evaluated instruments exhibited safety in RCR, implying their appropriateness for use in critical areas of mandibular molars without inducing excessive wear. This study underscores the instruments' reliability in navigating danger zones during RCR, contributing valuable insights for dental practitioners handling complex root canal scenarios in mandibular molars.

BACKGROUND: During the natural history, the incidence HTLV-1 related diseases were 0.5% until 10% after decades of infection. Despite relative low lethality, previous study observed that HTLV-1 infection is associated with significantly increased mortality. For example, the incidence of ATLL and HAM/TSP, co-infections with HIV and HCV, parasitic co-infection with Strongyloides stercoralis may increase morbidity and mortality. OBJECTIVE: Determine the mortality rate and its major variables as possible risk factors, analyzing the HTLV Clinic at Emilio Ribas Institute, a continuous open cohort of HTLV patients since 1997. METHODS: This cohort open cohort possesses new patients added at a rate of approximately 50 patients/year. There were 1100 HTLV-infected subjects identified by September 30th 2018. All clinical data including clinical and laboratory data, which have been updated on a regular basis over the last 22 years, were entered into a specific REDCap database. The Ethical Board of the IIER approved the protocol. RESULTS: Along 22 years of clinical care in the HTLV-out clinic, 727 HTLV-1-infected subjects and 248 HAM/TSP cases. Four-hundred sixty-eight patients of whom remaining under active follow up. The mean follow-up time of the cohort was 12 years. Twenty-seven patients died (median age of 51,5 years old). From this total, 13 was asymptomatic carriers and 14 HAM/TSP subjects, 12 of asymptomatic and seven HAM/TSP possess co-infected with HIV or/and HCV. Other seven presented HAM/TSP without co-infection, and all was female, and sepsis was the majority cases the majority of cases of sepsis were related to infection of the urinary tract (p=0.058) and to ulcers of decubitus (p=0.021), and it was associated with risk factors for mortality. CONCLUSIONS: Overall, the mortality rate for HAM-TSP patients was six percent. The mean life expectancy in Brazil is about 78 years in 2018, twenty-two years higher than HAM/TSP patients without any other coinfection. This study highlights the possibility of higher death risk among HTLV-1-infected patients and HAM/TSP subjects in Brazil, and identified some risk factors for this outcome. Also, these patients may possess higher risk for morbidity, usually urinary tract infections and decubitus scars, which could increase risk for death.

The use of cobalt-iron (VaCoFe) core is investigated as an alternative to silicon-iron (FeSi) on the design of interior permanent magnet synchronous motors (IPMSM). A spoke-type IPMSM geometry is optimized considering FeSi and VaCoFe cores for a torque range up to 40 N.m, providing a general comparative analysis between materials, considering the application of a 4-motor competition vehicle’s powertrain. A genetic optimization algorithm is applied over a hybrid analytical/finite-element model of the motor to provide sufficiently accurate electromagnetic and thermal results within a feasible time. VaCoFe can result in an estimated increase of up to 5 % in efficiency for the same torque, or up to 64 % torque increase for the same efficiency level. After optimization, and using a detailed time-dependent model, a potential 3.2 % increase in efficiency, a core weight reduction of 4.1 %, and a decrease of 9.6 % in the motor’s core volume was found for the VaCoFe at 20 Nm. In addition, for the same motor volume, the VaCoFe allows an increase of 51.9 % of torque with an increase of 1.1 % of efficiency, when compared with FeSi.

Orofacial injuries are common occurrences during contact sports activities; however, there is an absence of data regarding the performance of hybrid occlusal splint mouthguards, especially during compressive loading. To evaluate the total deformation and stress concentration, a skull model was selected and duplicated to receive two different designs of mouthguard devices: one model received a conventional custom-made mouthguard (MG) with 4-mm thickness and the other received a novel hybrid occlusal splint-mouthguard (HMG) with the same thickness. Both models were subdivided into finite elements. The frictionless contacts were used, and a nonlinear analysis was performed simulating the compressive loading in occlusion. The results were presented in von-Mises stress maps (MPa) and Total Deformation (mm). A higher stress concentration in teeth was observed for the model with the conventional MG, while the HMG design displayed a promising mechanical response with lower stress magnitude. The HMG de-sign displayed a higher magnitude of stress on its occlusal portion than the MG design. The hybrid mouthguard (HMG) reduced (1) jaw displacement during chewing and (2) the generated stresses in maxil-lary and mandibular teeth.

The disastrous 2017 fire season in Portugal lead to widespread recognition of the need for a paradigm shift in forest and fire management. We focused our study on Alvares, a parish in central Portugal which had 60% of its area burned in 2017, with a large record of historical. We evaluated how different fuel treatment strategies can reduce wildfire hazard in Alvares, through i) a fuel break network with different priorities and ii) random fuel treatments resulting from stand-level management intensification. To assess this, we developed a stochastic fire simulation system (FUNC-SIM) that integrates uncertainties in fuel distribution over the landscape. If the landscape remains unchanged, Alvares will have large burn probabilities in the north, northeast, and center-east areas of the parish that are very often associated with high fire line intensities. The different fuel treatment scenarios decreased burned area between 12.1-31.2%, resulting from 1%-4.6% increases in annual treatment area, and reduced 10%-40% the likelihood of wildfires larger than 5000 ha. On average, simulated burned area decreased 0.22% per each ha treated, and effectiveness decreased with increasing area treated. Overall, both fuel treatment strategies effectively reduced wildfire hazard and should be part of a larger, holistic and integrated plan to reduce the vulnerability of the Alvares parish to wildfires.

The glucose-insulin regulatory system and its glucose oscillations is a recurring theme in the literature because of its impact on human lives, mostly the ones affected by diabetes mellitus. Several approaches were proposed, from mathematical to data-based models, with the aim of modeling the glucose oscillation curve. Having such a curve, it is possible to predict, when injecting insulin in type 1 diabetes (T1D) individuals. However, the literature presents prediction horizons no longer than 6 hours, which could be a problem considering their sleeping time. This work presents Tesseratus, a model that adopts a multi-agent approach to combine machine learning and mathematical modeling to predict the glucose oscillation up to 8 hours. Tesseratus uses the pharmacokinetics of insulins and data collected from T1D individuals. Its outcome can support endocrinologists while prescripting daily treatment for T1D individuals, and provide personalized recommendations for such individuals, to keep their glucose concentration in the ideal range. Tesseratus brings pioneering results for prediction horizons of 8 hours for nighttime, in an experiment with seven real T1D individuals. It is our claim that Tesseratus will be a reference for classification of glucose prediction model, supporting the mitigation of short- and long-term complications in the T1D individuals.

Subnational governments play a key role responding to climate change risks in terms of policy strategies and instruments. This article analyzes how Brazilian municipal and state governments have developed and implemented public policies to mitigate and to adapt to climate change risks. We surveyed all cities’ and states’ climate policies within the country. The methodological approach includes five main points of analysis: 1. mitigation targets and intentions; 2. adaptation actions; 3. stakeholders’ participation; 4. policy implementation; 5. participation in networks related to climate change. Our results suggest that even though subnational climate policies in Brazil are isolated initiatives within the national context, they play an important role responding to climate change risks in different scales and levels. The strongest Brazilian policies with both mitigation and adaptation actions counted on previous mobilization for the climate issue involving different stakeholders from several segments of the society. These governments have also participated in transnational cooperation networks related to climate change.

This study aims to analyze the interconnection between the concepts of digital economy and sustainability. These concepts have become popular due to awareness of climate change and increased development and adoption of technologies. Researchers, business leaders and policymakers are exploring the many ways digital technologies can be used to address sustainability issues. Using a systematic literature review with a bibliometric analysis, we examined a sample of 92 studies indexed in SCOPUS to identify research activity on this topic through April 2023. We found that 2022 had the highest number of peer-reviewed papers on the subject, with 31 publications. During the research, we also identified multiple opportunities for this interconnection, such as developing renewable energy and sustainable technological solutions, smart cities and sustainable urbanization, and sustainable consumption. These opportunities enabled by digital technologies allow companies to adopt sustainable business strategies and develop sustainable products. Despite these opportunities, the digital economy presents several challenges that can hinder efforts to achieve sustainability goals, such as increased e-waste, high energy consumption and rising carbon emissions, digital divide, job insecurity, growing monopolies, and data protection. These issues must be addressed to enable optimal use of the opportunities presented in the digital economy to promote sustainability.

The fourth industrial revolution, also known as Industry 4.0, has led to an increased transition towards automation and reliance on data-driven innovations and strategies. Companies in the manufacturing sector are heavily integrating Industry 4.0 technologies, including cloud compu-ting, cyber-physical systems (CPS), big data analytics, horizontal and vertical system integration, the internet of things (IoT), and additive manufacturing (3d printing). The interconnected systems and processes have significantly increased operational efficiency, enhanced organizational capacity to monitor and control functions, reduced costs, and improved product quality. One significant way that companies have achieved these benefits is by integrating diverse sensor technologies within these innovations, allowing critical data collection on products, equipment performance, and maintenance. The sensors connect systems and machines, allowing them to communicate and track operations for enhanced operations. While numerous research has been conducted to show the role of sensors in industry 4.0, limited studies show how these innovations can leverage product design to maximize benefits and opportunities. Given the rapidly changing market conditions, Industry 4.0 requires new products and business models to ensure companies adjust to the current and future changes. These requirements call for the evolutions in product design processes to accommodate design features and principles applicable in the current dynamic business environment. This research paper employs a systematic bibliometric literature review (LRSB) methodology to explore and synthesize data on how Industry 4.0 and sensors can leverage product design. The results show that various product design features create opportunities to be leveraged to guarantee the success of Industry 4.0 and sensor technologies. However, the research also identifies numerous challenges that undermine the ongoing transition towards intelligent factories and products.

The digital transition processes have demonstrated an enormous capacity to develop and implement sustainable solutions, which allow solving several problems such as poverty, high rates of species extinction and lack of equal opportunity. However, little attention is paid to the connection between the digital transition and sustainability. Thus, a systematic review of the bibliometric literature was developed to fill this knowledge gap and demonstrate the potential contributions of the digital transition to environmental, economic and social sustainability aspects. In environmental sustainability, the digital transition involves the application of technologies such as AI, big data analytics, IoT, and mobile technologies that are used to develop and implement sustainability solutions in areas such as sustainable urban development, sustainable production and pollution control. In economic sustainability, emerging digital technologies can drive transformation into the more sustainable circular economy, the digital sharing economy, and establish sustainable manufacturing and infrastructure design. In the digital transition to social sustainability, the studies analyzed demonstrate the need for multidimensional policy perspectives to address the current digital divide. For effective management of the digital transition that achieves sustainability goals, the study discusses alternative approaches that include innovation through experimentation, and dynamic and sustainable advantages achievable through temporary benefits.

The Mediterranean region offers good weather conditions for outdoor pig production (OPP), which is considered more environmentally friendly than intensive indoor production. However, the continuous input of food and pigs' excreta increases the soil organic matter (SOM) and phosphorus (P), increasing the risk of waterbodies eutrophication. This work aimed at evaluating in OPP areas soil P dynamics and the role of SOM on P sorption and P release. The experiment was done for two years, at an area of 2.8 ha with an animal charge of 9 adults ha-1. Georeferenced soil samples were taken at 0.20 m depth, and a soil P sorption experiment was carried out. At the end of the experiment, for the background value, the levels of SOM increased between 85–376%, and Olsen P values ranged between -82–884%. SOM levels above 2% caused a decrease in the binding energy of P sorption according to the linear model b=-15.541SOM+115.20 (p <0.01) as well as a decrease of the soil P sorption capacity Qmax=-41.272SOM+298.37 (p <0.01). To avoid the accumulation of SOM and P preventing hotspots for waterbodies eutrophication, an adequate animal charge together with soil cultivation for pig grazing can be a cost-effective practice.

Background: Here, we investigated the inflammaging and physical performance in older adults before and after the COVID-19 pandemic. Methods: Women(n=18) and men(n=7) older were evaluated before the COVID-19 pandemic(PRE), 12 months after the lockdown(POST), and 10 months after resuming exercise training(POS-TR). Physical tests [gait speed(GS) and timed-up-and-go(TUG)]; muscle strength (handgrip-HG), and serum cytokine levels were assessed. Results: The older women showed higher GS and TUG at POST than PRE and POST-TR, besides lower HG at POST-TR than PRE, whereas older men exhibited lower HG at POST and POST-TR than PRE. Both groups presented (1)lower IL-10 and IL-12p70 values in contrast to higher IL-6/IL-10 and IL-8/IL-10 ratios at POST than PRE; (2)higher IL-10 values and lower IL-8/IL-10 ratio at POST-TR than POST; (3)higher IL-12p70/IL-10 ratio at POST-TR than PRE and POST. Particularly older women showed: (4)lower IL-6 values at POST and POST-TR than PRE; (5)lower IL-8 and IL-10 values at POST-TR than POST; (6)and higher TNF-α/IL-10 and IFN-γ/IL-10 ratios at POST than PRE and POST-TR. Significant correlations between the variables were found in both groups. Conclusion: During the COVID-19 pandemic, detraining and resumption of exercise training promoted distinct alterations in physical capacity and inflammaging among older women and older men population.

The global craft beer market is witnessing substantial growth, with a particular spotlight on sour beers. These unique brews are created through lactic fermentation initiated by lactic acid bacteria (LAB). However, the presence of hops, renowned for their antimicrobial properties, can pose a limitation within the realm of sour beer production. This research aims to explore and assess the potential of sour beer as a probiotic beverage. It involves a comparative analysis of the viability of Lacticaseibacillus paracasei subsp. paracasei F19 (F19) and 431 (L431) in a sour beer with an International Bitterness Unit (IBU) value of 26.65, alongside examining the ex-pression of genes such as horA, horB, horC, hitA, bsrA, and recA, which are associated with hop resistance. The study encompasses the development of two formulations of sour beers characterized by both high hop content and a robust probiotic count (8.44 – 8.77 log CFU/mL). The findings suggest that both probiotic strains of F19 and L431, are well-suited to produce sour beers with elevated hop levels, demonstrating excellent stability. Notably, the expression of genes responsible for hops resistance exhibited distinct modulation patterns among the two strains. It appears that a higher concentration of bsrA, as observed in strain L431, may be more effective in mitigating the effects of hop-related stress, potentially surpassing the combined expression of horA and bsrA. Nonetheless, further research is essential to validate this observation in gene expression. F19 and L431 emerge as promising candidates for the development of sour beers with increased hop intensity.

Quality control is a critical component in industrial manufacturing, directly influencing efficiency, product reliability, and ultimately, customer satisfaction. In the dynamic environment of industrial manufacturing, traditional methods of inspection may not adequately meet the evolving complexity, necessitating innovative approaches to bolster precision and productivity. In this study, we explore the application of mixed reality (MR) technology for real-time quality control in the assembly process. Our methodology involved the integration of smart glasses with a server-based image recognition system, designed to conduct real-time component analysis. The innovative aspect of our study lies in the harmonization of MR and computer vision algorithms, providing immediate visual feedback to inspectors and thereby improving the speed and accuracy of defect detection. YOLOv8 have been adopted in this study for detection object model. The project implementation occurred in a controlled environment to enable a comprehensive evaluation of the system functionality, the identification of possible problems and improvements in the system performance. The results indicated the viability of mixed reality as a powerful tool for enhancing traditional inspection processes. The fusion of MR and computer vision offers possibilities for future advancements in industrial quality control, paving the way for more efficient and reliable manufacturing ecosystems.

ATLID (ATmospheric LIDar) is the atmospheric backscatter LIDAR (Light Detection and Ranging) on board of the EarthCARE (Earth Cloud, Aerosol and Radiation Explorer) mission, the sixth Earth Explorer Mission of the ESA (European Space Agency) Living Planet Programme [1-5]. ATLID’s purpose is to provide vertical profiles of optically thin cloud and aerosol layers, as well as the altitude of cloud boundaries [6-10]. In order to achieve this objective ATLID emits short duration laser pulses in the UV, at a repetition rate of 51 Hz, while pointing in a near nadir direction along track of the satellite trajectory. The atmospheric backscatter signal is then collected by its 620 mm aperture telescope, filtered through the optics of the instrument focal plane assembly, in order to separate and measure the atmospheric Mie and Rayleigh scattering signals. With the completion of the full instrument assembly in 2019, ATLID has been subjected to an ambient performance test campaign, followed by a successful environmental qualification test campaign, including performance calibration and characterization in thermal vacuum conditions. In this paper the design and operational principle of ATLID is recalled and the major performance test results are presented, addressing the main key receiver and emitter characteristics. Finally, the estimated instrument, in-orbit, flight predictions are presented; these indicate compliance of the ALTID instrument performance against its specification and that it will meet its mission science objectives for the EarthCARE mission, to be launched in 2023.

Industry 4.0 or the Fourth Industrial Revolution is driven by innovative technologies that have profound effects on both production systems and business models. This revolution is characterized by the addition of disruptive technologies and methods. These aspects of Industry 4.0 have a significant impact on marketing and have led to an evolution to ensure that marketing activities align with technological advancements and address consumers' current needs. The purpose of this paper is to formulate and discuss future research avenues for marketing considering the changes brought by Industry 4.0. The approach taken in the paper is to review the relevant literature and focus on the key themes most important for future research on industry 4.0 and marketing. Therefore, a systematic literature review was conducted based on SCOPUS indexing online database of scientific articles, the most important peer-reviewed peer in the academic world. The paper finds that there are a number of research avenues for marketing researchers to conduct investigations on, but the most important areas are five marketing principles in Industry 4.0: cooperation, conversation, co-creation, cognitivity, and connectivity.

Hypertensive diseases of pregnancy (HDP) represent a global clinical challenge, affecting 5-10% of women and leading to complications for both maternal well-being and fetal development. At the heart of these complications is endothelial dysfunction, with oxidative stress emerging as a pivotal causative factor. The reduction in nitric oxide (NO) bioavailability is a vital indicator of this dysfunction, culminating in blood pressure dysregulation. In the therapeutic context, although antihypertensive medications are commonly used, they come with inherent concerns related to maternal-fetal safety, and a percentage of women do not respond to these therapies. Therefore, alternative strategies that directly address the pathophysiology of HDP are required. This article focuses on the potential of the nitrate-nitrite-NO pathway, abundantly present in dark leafy greens and beetroot, as an alternative approach to treating HDP. The objective of this review is to discuss the prospective antioxidant role of nitrate. We hope our discussion paves the way for using nitrate to improve endothelial dysfunction and control oxidative stress, offering a potential therapy for managing HDP.

Since its inception in December 2019, Covid-19 has challenged the global scientific community. Some treatments were used in this infection, but doubts still persist regarding the use of medications ¹. More severe cases complicate with endothelial dysfunction, excess thrombin synthesis and decreased fibrinolysis which, associated with hypoxemia, lead to a hypercoagulability state ² and some authors indicate the use of anticoagulants for these ³. For mild cases, doubts remain regarding this indication. We will report the case of a patient with mild symptoms of covid-19, complicated by inferior mesenteric vein thrombosis.

Leishmaniasis are neglected diseases that affect regions such as South Asia, South Africa and Latin America, less developed regions. Current treatment, for cutaneous, mucocutaneous and visceral leishmaniosis, which are the main forms of the disease, is based on the administration of pentavalent antimonial and amphotericin B. However, these drugs have low efficacy and high toxicity. For this reason, the search for new treatments for this disease is necessary, based on studies of new molecules and their conformations. The research proposed the conformational study of brominated guanidine compounds with potential antileishmanial activity using Nuclear Magnetic Resonance (NMR) and X-ray diffraction (XRD) techniques. The present study involves the bro-minated molecules, LQOF-G2, LQOF-G30, LQOF-G35 and LQOF-G35-Br. The later was synthesized by the reaction of LQOF-G35 with NBS under IR irradiation at 120 Watts of potency and dichloro-methane as solvent by 12-h of exposition. The obtained results demonstrated the efficiency of the bromination method, since two bromines atoms entered the molecule. Furthermore, NMR analysis showed the occurrence of a conformational change from Z to E when compound LQOF-G35 was brominated to LQOF-G35-Br. This feature was well confirmed by comparative DRX study of the LQOF-G35 and LQOF-G35-Br compounds. The antileishmanial activity of LQOF-G2 e LQOF-G35 motivated the synthesis of new brominated compounds LQOF-G30 e LQOF-G35-Br.

We sought to evaluate the effects of non-surgical periodontal treatment (NSPT) on periodontal clinical parameters, systemic blood pressure (BP) and plasma levels of systemic inflammation markers in patients with combined refractory arterial hypertension (RAH) and stage III grade B periodontitis. Twenty-seven participants with RAH and periodontitis received NSPT. The analyzed clinical parameters were probing depth (PD), clinical attachment level (CAL), bleeding on probing (BOP), and plaque index (PI). An assessment was performed for systemic BP, complete blood count, coagulogram, creatinine measurement, C-reactive protein (CRP), glycated hemoglobin, cholesterol, glutamic oxaloacetic transaminase, glutamate pyruvic transaminase, waist-hip ratio, and body mass index. In the follow-up period, twenty-two patients were evaluated at baseline and after 90 and 180 days. The data were submitted to statistical analysis (α=0.05%). As expected, the clinical results showed a significant improvement in the percentages of PI, BOP, PD and CAL, which were statistically significant at 90 and 180 days (p&lt;0.0001). Importantly, NSPT significantly reduced the blood level of CRP (p&lt;0.02). However, no significant reduction in BP parameters was noted in the evaluated follow-up periods. NSPT, despite the benefits in periodontal clinical parameters, reduced the plasma level of CRP but not the BP in patients with combined RAH and periodontitis.

Chagas disease is a Neglected Tropical Disease with limited and ineffective therapy. In a search for new antitrypanosomal compounds, we investigated the potential of metabolites from bacteria living in corals and sediments of the Southeastern Brazilian coast. Three corals Tubastraea coccinea, Mussismilia hispida, Madracis decactis and sediments yielded 11 bacterial strains, that were fully identified by MALDI-ToF/MS or gene sequencing, resulting in six genera - Vibrio, Shewanella, Mesoflavibacter, Halomonas, Bacillus and Alteromonas. To conduct this study, EtOAc extracts were prepared and tested against Trypanosoma cruzi. Crude extracts showed IC50 values ranging from 15 to 51 μg/mL against trypomastigotes. The bacterium Mesoflavibacter zeaxanthinifaciens was selected for fractionation, resulting in an active fraction (FII) with IC50 values of 17.7 μg/mL and 23.8 μg/mL against the trypomastigotes and amastigotes, respectively, with neither mammalian cytotoxicity nor hemolytic activity. Using NMR and ESI-HRMS analysis, FII revealed the presence of unsaturated iso-type fatty acids. Its lethal action was investigated, leading to a protein spectral profile of the parasite altered after treatment. FII also induced a rapid permeabilization of the plasma membrane of the parasite, leading to cell death. These findings demonstrate these unsaturated iso-type fatty acids as possible new hits against T. cruzi.

This study addresses the implementation of the International Financial Reporting Standard 9 (IFRS 9) in the European Union as of January 1, 2018, replacing the International Accounting Standard 39 (IAS 39) to introduce a new model for recognizing Loan Loss Provisions (LLP) based on Expected Credit Loss (ECL). This model responds to criticisms of the former Incurred Credit Loss (ICL) system for its inability to reflect credit losses in a timely manner, potentially exacerbating the effects of financial crises (Bushman &amp; Williams, 2015; Gebhardt &amp; Novotny-Farkas, 2011). The study focuses on the effects of adopting the ECL model on the level of Loan Loss Allowances (LLA) in loans, own equity, and the Common Equity Tier 1 (CET1) ratio across 13 Portuguese commercial banks. A mean comparison test is used to evaluate scenarios before and after the application of the ECL model, highlighting the importance of regulator actions and the adequacy of loss recognition policies, including the effects of Regulation (EU) 2017/2395 of December 12. The results obtained demonstrate significant negative impacts on the net values of loans, own equity, and the CET1 ratio upon adopting the IFRS 9 ECL model, due to the widespread increase in LLAs.

This paper analyses the viability of different solutions to passively augment the axial stiffness of a horizontal axis radial levitation passive magnetic bearing (PMB) with topology previously studied. The zero-field cooling (ZFC) of high-temperature superconductor (HTS) bulks promotes higher magnetic impulsion and levitation forces and lower electromagnetic losses than with the field-cooling (FC), but on the other hand, the guiding stability is much lower than with FC. Because of stability reasons, FC was adopted in most superconducting maglev systems. The trend of this research group has been to develop an HTS ZFC horizontal axis radial levitation PMB presenting notable levitation forces with reduced electromagnetic losses, defined by a topology that creates guiding stability. Previous work has shown that even optimizing the bearing geometry to maximize magnetic guidance forces, could not be enough to guarantee the axial stiffness required for many applications. First, the extent to which guidance forces are augmented by increasing the number of HTS bulks in the stator is evaluated. Then, the axial stiffness augmentation by passively adding two limiting permanent magnet (PM) rings is evaluated. Results show that the axial stiffness is highly augmented by adding limiting PM rings with no significant additional investment. This change enables using the studied ZFC superconducting PMB in high-precision axial stability applications, such as precision gyroscopes, horizontal axis propellers and turbines.

In the context of Shared Autonomous Vehicles, the need to monitor the environment inside the car will be crucial. This article focuses on the application of deep learning algorithms to detect objects, namely lost/forgotten items to inform the passengers, and aggressive items to monitoring if violent actions may arise between passengers. For object detection algorithms was used public datasets (COCO and TAO) to train state-of-the-art algorithms, such as YOLOv5. For violent action detection was used the MoLa InCar dataset to train on state-of-the-art algorithms such as I3D, R(2+1)D, SlowFast, TSN and TSM. At the end an embedded automotive solution was used to demonstrate both methods running in real-time.

The first treatments with dental implants had low success rates (75%). Nowadays, oral rehabilitation with titanium dental implants has a high success rate (95-98%). The success rate significantly increases due to increased scientific knowledge about osseointegration, changes in surgical techniques, and the development of implant surface treatments. Despite the high success rate of implants, no protocol defines the time for the prosthesis to be installed and loaded after surgery. This work compares a new dental implant's primary (mechanical) and secondary (osseointegration) stability. Dental implant with micro- and nano-roughness surface was placed in 24 patients with a minimum of 35 N.cm and a maximum of 60 N.cm. Primary stability was quantified with a torque wrench and Ostell Mentor. The secondary stability 45 and 60 days after surgery was measured with Ostell. The results showed no statistical difference in secondary stability at 45 and 60 days postoperatively among implants. The success rate of dental implants can be associated with the surface morphology with micro and nano-roughness and the shape of the fillets of the implant threads. When the manufacturer's guidelines are followed, it is possible to prosthetically rehabilitate the patient with an implant 45 days after surgery.

The practical application of a multi-objective optimization strategy based on evolutionary algorithms was proposed to optimize the plastics thermoforming process. For that purpose, the various steps of the process were considered individually and the optimization strategy was applied to the determination of the final part thickness distribution with the aim of demonstrating the validity of the methodology proposed. The preliminary results obtained considering three different theoretical initial sheet shapes indicates clearly that the methodology proposed is valid, as it provides solutions with physical meaning and with a great potential to be applied in real practice.

This article delves into the pro-cyclicality of Loan Loss Provisions (LLPs) and earnings management, along with equity management, in Portuguese banks against the backdrop of implementing the IFRS 9's Expected Credit Loss (ECL) model. It concentrates on how LLPs mirror economic cycles and financial management practices, providing valuable insights into the operational dynamics of the Portuguese banking sector, marked by distinct economic and regulatory challengesThe research examined a sample of five Portuguese commercial banks, chosen from a group of seventeen in the Portuguese Banking Association. Data spanning from 2013 to 2022 were manually gathered. A multiple linear regression model was employed to scrutinize the relationship between LLPs and variables indicative of economic cycles and the earnings and equity management. The methodology aligns with the approaches of Araújo et al. (2018), Beatty and Liao (2014), and Casta et al. (2019). The analysis indicates a pro-cyclicality in LLPs within the Portuguese context, with a positive response of LLPs to economic indicators like unemployment. Contrarily, the extent of earnings and equity management under the ECL model was less marked compared to the Incurred Credit Loss (ICL) model, suggesting the impact of more stringent regulatory measures. The research corroborates the pro-cyclicality of LLPs in Portuguese banks under the ECL framework, underscoring the necessity for ongoing monitoring and refinement of models for forecasting and recognizing credit losses. The findings point to an area for improvement in financial management practices, despite regulatory enhancements, to promote transparency and ensure financial stability.

. (1) Background: The aim of this study was to verify the differences in body composition, power and lower limb muscle strength in futsal players from three competitive levels. (2) Methods: The study involved 68 players (24.26 ± 4.63 years), divided into three competitive levels: elite, sub-elite and amateur. To assess physical condition, we used the Inbody270, the ChronoJump and the Isokinetic Dynamometer and used the non-parametric Kruskal-Wallis test to compare the three independent variables. (3) Results: There were no differences in body composition between the players at the three competitive levels. With regard to lower limb muscle power and strength, the elite group showed, on average, better performance and capabilities, especially when compared to the amateur group, and all groups showed an H/Q ratio &gt; 60%. (4) Conclusions: We conclude that there are not many differences in physical condition between the three competitive levels of futsal, despite the unequal sporting demands between them. However, the elite group has greater power and muscle strength, and both groups showed a high probability of lower limb muscle injury at this stage of the sporting season, alerting sports training professionals to the importance of individualized analysis of physical condition and performance capacity.

Background: The management of gestational diabetes mellitus (GDM) focuses on dietary interventions, physical activity, and pharmacological therapy. Strategies that enhance adherence to the diet could play a pivotal role in managing this population. Objective: To compare the effectiveness of outpatient nutritional guidance supplemented by digital media with exclusively standard outpatient nutritional guidance in pregnant women with GDM. Methods: This was a randomized, patient-blinded clinical trial conducted at the Diabetes and Pregnancy outpatient clinic from February 2021 to January 2023. Pregnant women with GDM were randomly allocated into two groups: the Control Group (CG) received exclusively outpatient nutritional guidance, and the Intervention Group (IG) received outpatient nutritional guidance along with reminders via WhatsApp. Dietary intake (calories, carbohydrates, lipids, proteins, and fibers) was evaluated using 24-hour dietary recalls (24HR). Glycemic control and the need for pharmacological treatment were also assessed. Mann-Whitney tests were applied to numerical variables, and Fisher's exact test or Chi-square tests were used for categorical variables. Results: 81 women were included, 34 allocated to the CG, and 47 to the IG. Patients were followed for a period of 4 to 8 weeks. Few differences were observed in glycemic control between the two groups over the follow-up period. There were no statistical differences in pharmacological therapy (p=0.498); 188 24HR were conducted in the CG and 290 in the IG. A statistically significant increase in lipid intake was observed in the IG over the follow-up period compared to the CG (p

In recent decades, the requirements for implantable medical devices increased, but the risks of implant rejection still exist. These issues are primarily associated with poor osseointegration, leading to biofilm formation on the implant surface. This study focuses on addressing these issues by developing a biomaterial for implant coatings. 45S5 Bioglass has been widely used in tissue engineering due to its ability to form a hydroxyapatite layer, ensuring a strong bond between the hard tissue and the bioglass. In this context, 45S5 bioglasses, modified by the incorporation of different amounts of copper oxide, from 0 to 8 mol%, were synthesized by the melt-quenching technique. The incorporation of Cu ions does not show a significant change in the glass structure. Since the bioglass exhibited the capacity of being polarized, and therefore promoting the osseointegration effectiveness, the electrical properties of the prepared samples were studied using the impedance spectroscopy method, in the frequency range of 102-106 Hz and temperature range of 200-400 K. The effects of CuO on charge transport mobility were investigated. Additionally, the bioactivity of the modified bioglasses was evaluated through immersion tests in simulated body fluid. The results revealed the initiation of a Ca-P-rich layer formation on the surface within 24 h, indicating the potential of the bioglasses to enhance the bone regeneration process.

Social distancing policies put in place during COVID-19 epidemic in addition to helping to limit the spread of the disease also contributed to improving urban air quality. Here we show a decrease in air pollutant concentration as a consequence of mobility reduction in São Paulo during the containment measure which began on 22^nd March 2020. When comparing to foregoing weeks to equivalent periods of 2019, the concentration of most air pollutants sharply decreased in the first days of mobility restriction, to then increase again after government officials downplayed the threat of the disease. This trend is also followed by a decrease in hospital admissions by SARS-influenza. Therefore, despite the great economic and social unrest caused by the pandemic, this unique situation shows that large-scale mobility reduction policy had a significant impact on air quality, benefiting, directly and indirectly, the public health system.

Alzheimer's disease (AD) is a stealthy and progressive neurological disorder that is a leading cause of dementia in the global elderly population, imposing a significant burden on both the elderly and society. Currently, the condition is treated with medications that alleviate symptoms. Nonetheless, these drugs may not consistently produce the desired results and can cause serious side effects. Hence, there is a vigorous pursuit of alternative options to enhance the quality of life for patients. Ginkgo biloba (GB), an herb with historical use in traditional medicine, contains bioactive compounds such as terpenoids (Ginkgolides A, B, and C), polyphenols, organic acids, and flavonoids (quercetin, kaempferol, and isorhamnetin). These compounds are associated with anti-inflammatory, antioxidant, and neuroprotective properties, making them valuable for cognitive health. A systematic search across three databases using specific keywords GB in AD and dementia yielded 1702 documents, leading to the selection of 15 clinical trials for synthesis. In eleven studies, GB extract/EGb 761® was shown to improve cognitive function, neuropsychiatric symptoms, and functional abilities in both dementia types. In four studies, however, there were no significant differences between the GB-treated and placebo groups. Significant improvements were observed in scores obtained from the Mini-Mental State Examination (MMSE), Short Cognitive Performance Test (SKT), and Neuropsychiatric Inventory (NPI). While the majority of synthesized clinical trials show Ginkgo biloba has promising potential in these conditions, more research is needed to determine optimal dosages, effective delivery methods, and appropriate pharmaceutical formulations. Furthermore, a thorough assessment of adverse effects, exploration of long-term use implications, and investigation into potential drug interactions are critical aspects that must be carefully evaluated in future studies.

The present study aimed to characterize the microstructure of a temporary 3D printing resin (Resilab Temp), evaluating the optical properties and mechanical behavior according to different post-processing curing times. For the analysis of the surface microstructure and establishment of the best printing pattern, samples in bar format following ISO 4049 (25 x 10 x 3 mm) were designed in CAD software (Rhinoceros 6.0), printed on the W3D printer (Wilcos), and light-cured in Anycubic Photon at different times (without curing, 16 minutes, 32 minutes, and 1 hour). For the structural characterization, analyses were carried out in FTIR (Fourier Transform Infrared Spectroscopy) and Scanning Electron Microscopy (SEM). The mechanical behavior of the resin was based on flexural strength tests and Knoop microhardness. Color and translucency analysis were performed with a spectrophotometer (VITA Easy Shade Advanced 4.0), which was evaluated following CIELab, using gray, black, and white backgrounds. All analyses were performed immediately after making the samples and repeated after thermal aging with 2 thousand cycles (5-55 °C). The results obtained were statistically analyzed with a significance level of 5%. FT-IR analysis showed about a 46% degree of conversion on the surface and 37% in the center of the resin sample. The flexural strength was higher for the groups polymerized for 32 min and 1h, while the Knoop microhardness did not show a statistical difference between the groups. Color and translucency analysis also did not show statistical differences between groups. According to all the analyses carried out in this study, for the evaluated material, the post-polymerization time of 1 hour can be suggested to improve the mechanical performance of 3D-printed devices.

The marketing industry is rapidly evolving, necessitating educational programs to adapt and equip graduates with relevant skills and knowledge. This systematic literature review with bibliometric analysis (SLRBA) explores the integration of Problem-Based Learning (PBL) in marketing education. PBL is an instructional strategy that empowers students to solve real-life problems by integrating theory and practice, thus fostering critical thinking and decision-making skills. Our review synthesizes data from 71 sources, highlighting the definition of PBL, strategies to promote its implementation in marketing education, and the benefits and challenges associated with this approach. The findings indicate that PBL enhances student engagement, provides hands-on experience, and prepares students for real-world marketing challenges. Strategies such as using social media, serious games, e-learning, and feedback mechanisms are discussed for their effectiveness in promoting active learning and student participation. Despite its advantages, PBL faces challenges such as resource intensiveness, student resistance, and information integrity issues. This review underscores the importance of PBL in bridging the gap between theoretical knowledge and practical application, ultimately preparing marketing students to meet the demands of the industry. The paper concludes with recommendations for future research and best practices for implementing PBL in marketing education.

This study aims to determine the role of Industry 4.0 sensors in digital transformation. Using a systematic literature review with a bibliometric analysis, we examine a sample of 52 studies from the SCOPUS database to identify research activity on this topic until December 2022. We find that 2022 was the year with the highest number of peer-reviewed documents on the subject, with 18 publications. We also examine current themes and find that sensors can connect multiple systems and devices, thus enabling machine-to-machine communication and facilitating great precision during product designing, development, and production, thus enabling customization and improving quality. However, despite these benefits, the current sensor technologies face multiple challenges that undermine their maximum adoption.

The term fuzzy refers to things that are unclear or vague. In the real world, we often encounter a situation where we cannot determine whether the state is true or false, and fuzzy logic allows for more flexible reasoning. This is a form of multivalued logic where the truth values ​​of variables can be any real number between 0 and 1, as opposed to Boolean logic where the logical values ​​can only be 0 or 1. Fuzzy logic is therefore a problem-solving technique used to evaluate all available information and thus make the best decisions. When applied to marketing, fuzzy logic allows treating customers in an individual and personalized way, instead of being fully identified within a particular market segment. Fuzzy marketing considers the degree to which a customer belongs to certain segments and subsequently allows them to be targeted with messages that engage them emotionally. To better understand the application and importance of fuzzy logic in marketing strategy, we developed a systematic review of the bibliometric literature (LRSB). It was possible to create a connection between these concepts, marketing and fuzzy logic, to increase the efforts of marketing professionals to achieve competitiveness in the unpredictable business environment.

Big data analytics tools are the use of advanced analytic techniques targeting large and diverse volumes of data that include structured, semi-structured, and unstructured data from different sources and in different sizes from terabytes to zetabytes. The health sector is faced with the need to generate and manage large data sets from various health systems, such as electronic health records and clinical decision support systems. This data can be used by providers, clinicians, and policymakers to plan and implement interventions, detect disease more quickly, predict outcomes, and personalize care delivery. However, little attention is paid to the connection between big data analytics tools and the health sector. Thus, a systematic review of the bibliometric literature (LRSB) was developed to study how the adoption of big data analytics tools and infrastructures will revolutionize the healthcare industry. The review integrated 77 scientific and/or academic documents indexed in SCOPUS presenting up‐to‐date knowledge on current insights on how big data analytics technologies influence the healthcare sector and the different big data analytical tools used. The LRSB provides findings related to the impact of Big Data analytics on the health sector by introducing opportunities and technologies that provide practical solutions to various challenges.

Multicore magnetic nanoparticles of manganese ferrite were prepared using carboxymethyl-dextran and melamine as agglutinating agents. The nanoparticles prepared using melamine exhibit a flower-shape structure, a saturation magnetization of 6.16 emu/g and good capabilities for magnetic hyperthermia. Magnetoliposome-like structures containing the multicore nanoparticles exhibit sizes in the range 250 – 400 nm. A new antitumor thienopyridine derivative was loaded in these nanocarriers with a high encapsulation efficiency of 98% ± 2.6%. Release profiles in absence and presence of an AMF indicate a transport by diffusion, with a maximum compound release of 31% under the AMF. A sustained and controlled drug release in anticipated from the results, pointing to suitable characteristics of the magnetoliposomes for dual cancer therapy (combined magnetic hyperthermia and chemotherapy).

Students with disabilities are often framed as “the problem” and have limited opportunities to engage in standards based mathematics, leading to persistent underachievement. In this paper, we investigate a research divide between mathematics educational research for students with and without disabilities, a divide with significant differences in the theoretical orientations and research methodologies used to understand learners. Based on an analysis of 149 mathematics educational research articles published between 2013 and 2015, we found significant differences between articles focused on learners with and without disabilities. For those with disabilities, mathematical problem solving was understood primarily from behavioral and information processing theoretical perspectives, while for those without disabilities, problem solving was understood primarily through constructivist and sociocultural perspectives. While 86% of research on problem-solving including students with disabilities was quantitative, only 35% of research on students without disabilities was quantitative. Fifty percent of problem-solving research on students without disabilities was qualitative, compared to only 6% of research on students with disabilities. Problem solving, then, is studied in very different ways for learners with and without disabilities. Students without disabilities are studied through close analysis of learning, often individual. Students with disabilities are most often studied quantitatively, in groups, with little analysis of individual thinking. By offering only a limited range of methods and theoretical orientations, this research divide reifies deficit constructions of students with disabilities.

Sword-duels are interesting, from a game-theoretical perspective, as they correspond to sudden-death interactions between players (i.e., defeat means removal from the game), and where victory/defeat depend on not just skill, but also luck. Analyzing probabilities of victory streaks, given a certain level of self and others' skill, is thus relevant for any application domain that can be modeled in the same way. This paper takes inspiration from Miyamoto Musashi, famously undefeated for 61 duels, and implements a Markov-chain Monte-Carlo simulation approach to evaluate this scenario. Results suggest that a 61 victory streak can be probabilistically observed when skill level is roughly 6.5 times that of the average duelist, and with 95\% confidence when skill level is roughly 1000 times that of the average duelist. More generally, this paper provides a method for determining chances of victory streaks in game-theoretical sudden-death encounters, when both "skill" and "luck" contribute to the outcome of the encounter. Specific scenarios can be modeled by modifying the utilized Markov chain and adjusting sampled distributions as required.

Although the effect of thermal modification (TM) on teak wood color is well documented, a few studies were carried out in closed system processes, as well as it remains unclear the effect of different processes on the same material. This work aimed to verify the effect of closed and open system processes of TM on the color of fast-growing teak wood. Thermally modified wood was evaluated in a closed system at 160 °C (CS160) and in an open system at 185 °C and 210 °C (OS185 and OS210). We measured the moisture content (initial and final) of wood, and the corrected mass loss (CML). The chemical analyses encompassed the contents of alpha-cellulose, hemicelluloses, lignin, and extractives (total, in acetone and dichloromethane). Wood color was measured before and after TM according to the CIEL*a*b* color space. It was possible to achieve the same color using different processes of thermal modification (CS160 and OS210). TM reduced wood lightness (L*), red-green chromaticity coordinate (a*), and yellow-blue chromaticity coordinate (b*). L* and a* had the bigger and lower variations, respectively. The color of thermally modified wood was significantly changed, even at the mildest condition tested (OS185, 0.33% CML).

The aging of the global population has increased the prevalence of neurodegenerative conditions. Bacopa monnieri (BM), an herb with active compounds, such as bacosides A and B, betulinic acid, loliolide, asiatic acid, and quercetin, demonstrates the potential for brain health. Limited research has been conducted on the therapeutic applications of BM in neurodegenerative conditions. This systematic review aims to project BM's beneficial role in brain disorders. BM has anti-apoptotic and antioxidant actions and can repair damaged neurons, stimulate kinase activity, restore synaptic function, improve nerve transmission, and increase neuroprotection. The included twenty-two clinical trials demonstrated that BM can reduce Nuclear Factor-κB phosphorylation, improve emotional function, cognitive functions, anhedonia, hyperactivity, sleep routine, depression, attention deficit, learning problems, memory retention, impulsivity, and psychiatric problems. Moreover, BM can reduce the levels of pro-inflammatory biomarkers and oxidative stress. Here, we highlight that BM provides notable therapeutic benefits and can serve as a complementary approach for the care of patients with neurodegenerative conditions associated with brain disorders. This review adds to the growing interest in natural products and their potential therapeutic applications by improving our understanding of the mechanisms underlying cognitive function and neurodegeneration and informing the development of new therapeutic strategies for neurodegenerative diseases.

Latin America and the Caribbean offer the most favorable natural and social conditions for the emergence of cattle ranching that regenerate and maintains the ecosystem services on which life on Earth depends, that is energy efficient and that contributes to meeting fundamental human food needs. Unlike other major global producers, cattle farming in Latin America and the Caribbean is fundamentally based on pasture. Therein lies both its strength (due to the regenerative potential of well-managed pastures) and its vulnerability (due to the pervasive link between deforestation and pasture formation, especially in the Amazon, where 40% of the Brazilian herd is concentrated). The diversification of pastures (today marked by impressive monotony, with brachiaria accounting for 85% of the species in Brazil), the introduction of legumes and tree plantations within them, and the proper management of herds, open the way to the possibility of drastically reducing the area currently occupied by the activity (especially in the Amazon) while maintaining the supply of its products. Agricultural research has disseminated forms of moderate intensification of cattle ranching, which represent a low opportunity cost of animal feed and, at the same time, regeneration of ecosystem services that have so far been destroyed by the prevailing methods of farming.

Defensive behavior is a function of specific survival circuits, the “aversive brain system”, that are thought to be conserved across vertebrates, and involve threat detection and the organization of defensive responses to reduce or eliminate threat. In mammals, these circuits involve amygdalar and hypothalamic subnuclei and midbrain circuits. The increased interest in teleost fishes as model organisms in neuroscience created a demand to understand which brain circuits are involved in defensive behavior. Telencephalic and habenular circuits represent a “forebrain circuit” for threat processing and organization of responses, being important to mounting appropriate coping responses. Specific hypothalamic circuits organize neuroendocrine and neurovegetative outputs, but are the less well-studied in fish. A “midbrain circuit” is represented by projections to interneurons in the optic tectum which mediate fast escape responses via projections to the central gray and/or the brainstem escape network. Threatening stimuli (especially visual stimuli) can bypass the “high road” and directly activate this system, initiating escape responses. Increased attention to these circuits in an evolutionary framework is still needed.

Piperine, an active plant alkaloid from black pepper (Piper nigrum), has several pharmacological effects: antioxidant, anti-inflammatory and immunomodulatory, which involves inhibiting molec-ular events associated with various stages of cancer development. The aim of this study was to investigate the molecular mechanisms of action of piperine in relation to its potential anticancer effect on head and neck cancer cells. Parameters related to neoplastic potential, analysis of cyto-kine, protein and gene expression were investigated in the head and neck cancer cell lines (HEp-2 and SCC-25) treated with piperine. The results of the tests indicated that piperine modified mor-phology, inhibited viability and the formation of cell colonies. Piperine promoted genotoxicity by triggering apoptosis and cell cycle arrest in G2/M and S. A decrease in cell migration was also observed, and decreased expression of MMP2/9 genes. Piperine also reduced the expression of inflammatory molecules (PTGS2 and PTGER4), regulated the secretion of cytokines (IF-y and IL-8) and modulated the expression of ERK and p38. These results suggest that piperine exerts anti-cancer effects on tumor cells, and could be a promising natural treatment by regulating signaling pathways associated with head and neck cancer.

The rapid development of Deep Learning brought novel methodologies for 3D Object Detection using LiDAR sensing technology. These improvements in precision and inference speed performances lead to notable high performance and real-time inference, which is especially important for self-driving purposes. However, the developments carried by these approaches overwhelm the research process in this area since new methods, new technologies, and software versions lead to different project necessities, specifications and requirements. Moreover, the improvements brought by the new methods may be due to improvements in newer versions of deep learning frameworks and not just the novelty and innovation of the model architecture. Thus, it became crucial to create a framework with the same software versions, specifications and requirements that accommodate all these methodologies and allow the easy introduction of new methods and models. A framework is proposed that abstracts the implementation, reusing and building of novel methods and models. The main idea is to facilitate the representation of state-of-the-art (SoA) approaches and simultaneously encourage the implementation of new approaches by reusing, improving and innovating modules in the proposed framework, which has the same software specifications to allow a fair comparison. This makes it possible to determine if the key innovation approach outperforms the current SoA by comparing models in a framework with the same software specifications and requirements.

Alzheimer's disease is characterized by a progressive decline of cognitive functions. The class of drugs used for the treatment are acetylcholinesterase inhibitors. Essential oils have contributed to folk medicine and discovery of new drugs for a long time. The purpose of the study was to investigate the in vitro and in silico the anti-acetylcholinesterase activity, as well as acute toxicity of the essential oil of Lippia origanoides. EOLO was obtained by hydrostelting and analyzed by gas chromatography-mass spectrometry. The inhibition assay of acetylcholinesterase enzyme activity was evaluated in vitro, as well as in silico by docking. The effects of EOLO on hematological, biochemical and behavioral parameters were analyzed in mices. We expose that EOLO shows good anti-acetylcholinesterase activity and low toxicity, possibly resulting from the action of the majority compounds thymol, carvacrol and p-cymene. The anti-acetylcholinesterase potential in vitro demonstrating a 70% inhibition. The docking results elucidated the participation of the major phenolics in AChE inhibition by interacting with the catalytic cavity of AchE. The acute oral toxicity test classified as low toxicity. These results contribute to expand the knowledge about essential oil of Lippia origanoides. Therefore, appears to be promising for herbal medicine production with anti-acetylcholinesterase and antioxidant activity.

Hepatitis E virus is a major etiological agent of chronic hepatitis in immunosuppressed individuals. Studies on HEV in the context of liver transplantation have produced mixed results, most of the data coming from studies conducted in high-income countries. This was a prospective cohort study of liver transplant recipients in southeastern Brazil. Recipients were systematically followed for one year, with the objective of determining the prevalence, incidence, genotype, and natural history of HEV infection in this population. We included 107 liver transplant recipients and 83 deceased donors. Positivity for anti-HEV IgG was detected in 11 (10.2%) of the recipients and in eight (9.7%) of the donors. None of the patients tested positive for HEV RNA at baseline or during follow-up. There were no episodes of reactivation or seroconversion, even in cases of serological donor-recipient mismatch or in recipients with acute hepatitis. Acute and chronic HEV infections seem to be rare events in the region studied. That could be attributable to social, economic, and environmental factors. Our data indicate that, among liver transplant recipients, hepatitis E should be investigated only when there are elevated levels of transaminases with no defined cause, as part of the differential diagnosis of seronegative hepatitis after transplantation.

This draft aims at opening a discussion about the adequacy of non-stratal, non-derivational models of phonology, such as Declarative Phonology, to give appropriate accounts of any kind of phonological variation of morphemes. Refuting the assumption that all variants of one single morpheme correspond to a unique underlying form consecutively respecified through ordered adjustments of phonological shape, Declarative Phonology seems able to integrate explanations of both suppletive and non-suppletive alternation. A rough application of this model to suppletive alternation in Portuguese will be sketched out.

Background: The progression of periodontal diseases at national Portuguese level and its public awareness are of great interest, mainly due to the high burden of periodontitis. Objectives: To evaluate the prevalence progression of periodontal diseases in Portugal and correspondent public awareness, between 2004 and 2017, by using data from the Global Burden of Disease (GBD), Directorate-General of Health (DGH) and Google® Trends (GT). Methods: For the period 2004-2017, Portuguese national data of periodontal diseases prevalence were searched in the Institute for Health Metrics and Evaluation of GBD and DGH and for public awareness, GT comparison tool between Portuguese words for “Periodontitis”, “Gingivitis”, “Gums” and “Periodontal disease” trends was used. Results: For the period 2004-2017, the overall prevalence of periodontitis slightly increased from 11.3% to 11.7%. During that period the GT search term “Gums” (“Gengivas”) was the most relevant. It increased steadily over time while the search term “Periodontal disease” (“Doença periodontal”) decreased, being these search trends significantly correlated (

Innovative strategies to control malaria are urgently needed. Exploring the interplay between the Plasmodium sp. parasites and host red blood cells (RBC) offers opportunities for novel antimalarial interventions. Pyruvate kinase deficiency (PKD), characterized by heightened 2,3-diphosphoglycerate (2,3-DPG) concentration, has been associated with protection against malaria. Elevated 2,3-DPG levels, a specific mammalian metabolite, may hinder glycolysis, prompting us to hypothesize its potential contribution to PKD-mediated protection. We investigated the impact of the extracellular supplementation of 2,3-DPG on the Plasmodium falciparum intraerythrocytic developmental cycle in vitro. Results showed an inhibition of parasite growth, resulting from significantly less progeny from 2,3-DPG-treated parasites. We analyzed differential gene expression and the transcriptomic profile of P. falciparum trophozoites, from in vitro cultures submitted or not submitted to the action of 2,3-DPG, using Nanopore Sequencing Technology. The presence of 2,3-DPG in the culture medium was associated to a significant differential expression of 71 genes, mostly associated to GO terms nucleic acid binding, transcription, or monoatomic anion channel. Further, several genes related to the cell cycle control were downregulated in treated parasites. These findings suggest that the presence of this RBC-specific glycolytic metabolite impact the expression of genes transcribed during the parasite trophozoite stage and the number of merozoites released from individual schizonts, which supports the potential role of 2,3-DPG in the mechanism of protection against malaria by PKD.

Over a period of nearly one hundred years, Raul Lino da Silva (1879-1974) experienced the profound political, social and economic changes that marked the twentieth century in Portugal. Having been born during the Constitutional Monarchy (1822-1910), he lived through the First Republic (1910-1926), the Military Dictatorship (1926-1933) and the Second Republic, or Estado Novo (New State, 1933-1974), and died shortly after the Carnation Revolution of 25 April 1974, at the dawning of the Third Republic. Raul Lino was the architect who published the most in Portugal, having become known through his advocacy of the “Campanha da casa portuguesa” (“Portuguese house campaign”), which provoked a great deal of controversy among his peers. He is less known for the transversal quality of his synthesis between architecture, the decorative arts and territory, and its underlying affirmation of an idea of the city, which we conjecture from a diagonal reading of his theoretical and plastic narrative. We limit the analysis to the first half of the 20th century, concentrating on ten case studies, that encompass architectural projects, urbanistic plans and reports. The above expound the broad conception which he defended in the same year as was held the First National Architecture Congress (1948), whose proposals ratified in Portugal the orthodoxy established in 1933 by the International Congresses of Modern Architecture (CIAM). Quoting Aristotle Raul Lino conceived the city as the locus of happiness, shaping the possibilities of consensus between tradition and modernity by means of architecture, which is both envelope and stage for our collective existence. In fact, Raul Lino anticipated themes to be found in the narratives of authors like Aldo Rossi (1966), Paul Virilio (2004, 2009) or Peter Zumthor (2006), and his thought proves particularly relevant and timely in the present day.

This article presents a comprehensive review of the relationship in sustainable tourism and blockchain technology. The aim of this research is to explore the potential of blockchain to promote sustainable tourism, as well as to evaluate the current state of research and practical implementations in this field. The findings demonstrate the potential of blockchain in enhancing sustainability practices in tourism, while also highlighting the challenges and limitations. The study provides valuable insights for policymakers, industry practitioners, and researchers, and proposes future research directions to further advance the field.

The split of the brain into two hemispheres is pivotal to human existence, enabling incompatible versions of the world, with quite different priorities and values, to exist concomitantly. Neuroimaging techniques are usually the adopted methods to assess hemispherical bias. However, can differences in thinking orientation, behavioural style, and personality emerging from laterality be observed without the use of neuroimaging techniques? This paper investigates whether a personality test based on the Five-factor model (FFM) is also able to identify hemispherical bias. It does so by testing five hypotheses on personality differences related to handedness. The aim is to contribute to the instantiation of the FFM in neuroscience by testing its validity against the neuroscientific literature on brain laterality. The findings pointed to no statistically significant differences due to handedness in three out of five personality traits (namely, Neuroticism, Conscientiousness and Extraversion). As to the other two traits – Openness and Agreeableness – the hypotheses were only partially confirmed by the data, as the relevant difference found was not between left-handed and right-handed groups, but between ambidextrous and the others.

Upon the outbreak of the COVID-19, countries worldwide developed policies with the goal to introduce restrictive measures geared towards mitigating the spread of the virus. Although these health initiatives were put in place through top-down public directives, they relied heavily on the cooperation of citizens who had to be willing to carry them out. As a consequence, we could observe differences in compliance with governmental restrictions within and between countries. Increasing policy stringency was the method adopted overall to promote people’s compliance. This article used survey data from 10308 participants in Brazil to examine whether there was a positive correlation between policy stringency and compliance with restrictive measures to reduce the spread of COVID-19. The results revealed, however, that there was no direct influence of policy stringency on people’s health behaviors. Accordingly, I hypothesized that individual differences in personality traits were one of the drivers behind policy compliance, as they would support self-interests such as the duty to support authorities as well as the perceived health risks of certain behaviors and ultimately motivate compliance. The findings’ implications for both compliance research and for authorities wanting to nurture voluntary compliance with public health orders are discussed and suggestions are provided.

The relationship between religion and politics is a constant in the history of humanity. In the specific case of Western culture, it is possible to trace an archeology of the political as an effect of theological-political devices (essentially Christian-inspired). If we add to this the evolution of politics, in modern times, towards biopolitics, then the relationship focuses on very concrete topics. This is the case of the immunological process – from a personal, social, and philosophical perspective – thoroughly analyzed by Italian philosopher Roberto Esposito. In the context of his philosophical immunology, the place of religion is mainly archaeological and is interpreted critically. This article also aims to critically analyze his position, proposing a reading close to his thought but which is, at the same time, somewhat different.

The Atlantic Goliath Grouper Epinephelus itajara (Lichtenstein, 1822) is thought to occur on both sides of the Atlantic, from the Carolinas (USA) to Brazil in the western Atlantic, and from North Senegal to North Angola off West Africa in the eastern Atlantic. While there are fairly good data on their distribution in the western Atlantic, genetic verification of species status, confirmed occurrences, population status, fishing reports, and trade data are almost non-existent off West Africa. Part of the problem is that tropical West African countries lack a network of marine reserves that might protect this species. Add to this destruction of mangrove forests and other coastal habitats on which the species depends when in the post-larval and juvenile stages coupled heavy pollution and intense overfishing and it becomes clear that their survival is deeply threatened. The focus of this paper is to describe all of the known historical data and examine all current data to better evaluate their present status.

Background: We aimed to assess the association between DII and PD and the mediation effect of DII in the association of PD with systemic inflammation. Using the National Health and Nutrition Examination Survey (NHANES) 2009-2010, 2011-2012 and 2013-2014, participants that received periodontal exam and provided dietary recall data were included. The inflammatory potential of diet was calculated via DII. Periodontitis was defined according to the 2012 case definition. The clinical outcomes of interest were mean periodontal probing (PPD), mean clinical attachment loss (CAL) and thresholds of PPD and CAL. White blood cells (WBC), segmented neutrophils and C-reactive protein (CRP) were used as proxies for systemic inflammation. The periodontal measures were regressed across DII values using adjusted multivariate linear regression. Adjusted mediation analysis appraised the influence of DII in the association of periodontitis and systemic inflammation. 10,178 participants were included. DII was significantly correlated with mean PPD, mean CAL, thresholds of PPD and CAL, WBC, segmented neutrophils and DII (p&lt;0.01). A linear regression logistic adjusted for multiple confounding variables confirmed the association between DII and mean PPD (B = 0.02, Standard Error [SE]: 0.02, p&lt;0.001) and CAL (B = -0.02, SE: 0.01, p&lt;0.001). The association of mean PPD and mean CAL with both white blood cells and segmented neutrophils were mediated by DII (from 2.1 to 3.5%, p&lt;0.001). In the 2009-2010 subset, the association of mean CAL with serum CRP was mediated by DII (52.0%, p&lt;0.01). In conclusion, inflammatory diet and PD may be associated. Also, the inflammatory diet significantly mediated the association of leukocyte counts and systemic inflammation with periodontitis.

Despite the need for a sustainable energy resource, bioenergy gained its spotlight in the 2000s. Sugarcane is a significant crop in terms of sugar and energy capacity, and it can be an alternative energy source to mitigate the effects of climate change. Bioenergy production from sugarcane in Brazil is one of the most efficient. This production lends a centrality to biofuels' importance in confronting the effects of climate change. The present article reviews the Brazilian history of this crop as a biofuel source. We highlight the historical changes related to scientific, technological, industrial, and environmental advances since the beginning of the 20th century. We describe how creating governmental institutes and disseminating scientific knowledge strengthened public policies that led Brazil to occupy leadership positions in producing, distributing, and using bioenergy throughout the country. The compiled data shows the improvement and the new approaches needed in ethanol sugarcane. We developed a bibliometric analysis to evaluate Brazilian science's contribution to this process compared to other countries. Brazil's history of science and investments in sugarcane biofuel development for transportation may be divided into two phases: ethanol-only and flex-fuel cars. A third phase is starting, which is the ethanol-to-hydrogen era.

Glutathione (GSH) and melatonin (MLT) are two antioxidants that have been described as having a protective role against oxidative stress in several animal species, improving sperm quality and survival after cryopreservation. Since there is no knowledge on the simultaneous use of these two substances concerning its effects on ram semen cryopreservation, this study aimed to evaluate the effects of MLT, GSH, or their association, on in vitro parameters of ram semen after thawing. During eight weekly sessions, the semen from three Merino rams was pooled, divided into four aliquots, and diluted with an egg yolk-based semen extender without (control) and with antioxidants (MLT 1mM, GSH 5mM, and MLT 1mM + GSH 5mM). Diluted semen was evaluated before and after freezing process. Supplementation of fresh semen with GSH at 5 mM had a deleterious effect on total motility progressive (TPM), curvilinear velocity (VCL), straight-line velocity (VSL), average-path velocity (VAP), linearity (LIN), straightness (STR) and increased slow spermatozoon (%). MLT at 1 mM also has a negative effect on TPM, VSL, and STR in fresh semen. In thawed semen, 1 mM of melatonin increased the TPM regarding the group control. Also, the combination of both antioxidants attenuates the negative effect of GSH 5mM on TPM, VSL and BCF. These results indicate that 5mM GSH impairs or does not improve sperm kinetic parameters in fresh semen and suggest that melatonin when combined with GSH plays a protective role on these effects.

This research concerns in to understand the link between urban heat and cool island, the Local Climatic Zones (LCZ) and atmospheric systems during the winter season in the city of Balneário Camboriú, Southern Brazil. To collect meteorological data on urban environmental, 11 permanent points in the Balneário Camboriú metropolitan region were installed. To understand the atmos-pheric systems operating in the region, a synoptic analysis of the dates was performed, and then, the LCZs map created for the city in World Urban Database and Acess Portal Tools was used to cor-relate the magnitudes of the heat and cool islands found in Balneário Camboriú in the winter period. The results indicate that the increasing verticalization with the construction of skyscrapers in Balneário Camboriú has a significant influence on local conditions for the occurrence of heat and cold islands. The findings indicate that LCZs with sparsely distributed buildings (LCZs 6, 8 and 9) and LCZs with dense vegetation (LCZ A) have lower intensity magnitudes of heat and cool con-ditions. The biggest magnitudes of heat and cool islands were reported in LCZs 1 and 3 during the timeframe. The synoptic analysis supports earlier researches that points to atmospheric stability (Anticyclonic domain) as a favorable atmospheric setting for the emergence of urban hear and coolness islands.

The global population is at risk of vitamin D deficiency due to low exposure to sunlight and low intake of the vitamin through diet. The aim was to investigate in women the association between vitamin D status and parathyroid hormone (PTH), ultraviolet radiation, lifestyle, ethnicity, social conditions, and residential greenness. A 1-year longitudinal study assessed vitamin D status in 309 women, latitude 51° 14' N. Blood samples were taken four times throughout the year for analysis of 25(OH)D and serum PTH concentration. After each seasonal visit, the individuals completed 4-day diet diaries and used two dosimeter badges for 1 week to estimate weekly UVR exposure. A questionnaire was applied to provide information about lifestyle and their ethnicity. Residential greenness was measured by Normalized Difference Vegetation Index (NDVI), within a 1000 m radius around each participant’s home address. Women living in greener spaces were more likely to have improved vitamin D status (RR: 1.51; 95%CI: 1.13 – 2.02), as well as those who were more exposed to UVR (RR: 2.05; 95%CI: 1.44 – 2.92). Our results provided a first insight into the connection between vitamin D, residential greenness, and lifestyle in a region of temperate climate and with a high degree of urbanization.

Optical backbone networks constitute the fundamental infrastructure employed today by network operators to deliver services to users. As network capacity is a key factor influencing optical network performance, it is important to understand how topological and physical properties impact its behavior and to have the capability to estimate its value. In this context, we propose here a method to evaluate the network capacity that relies on the optical reach to account for physical layer aspects, in conjunction with constrained routing techniques for traffic routing. As this type of routing can lead to traffic blocking, particularly due to the limitation on the number of wavelengths per fiber, we also propose a fiber assignment algorithm designed to deal with this problem. We apply this method to a set of randomly generated networks using a modified Waxman model, and for a network with 60 nodes, in a scenario without blocking, we obtain capacities of about 2.5 Pbit/s for a symbol rate of 64 Gbaud and about 5 Pbit/s for a symbol rate of 128 Gbaud. Remarkably, this duplication in the total network capacity is achieved by an increase in the total fiber length of only about 51%.

Graphene is a two-dimensional nanostructured material with intrinsic properties that show promising performance in various applications, including electronics, renewable energy, medicine, mechanical enforcement and others. This study reports a bottom-up approach for the conversion of cyclohexane into graphene nanoflakes, which were then deposited onto fiberglass using a non-thermal generator. The composite was characterized using transmission electron microscopy, which revealed the formation of stacked few-layer graphene with a partially disordered structure and a d-spacing of 0.358 nm between the layers. X-ray diffraction confirmed the observations from the TEM images. SEM images showed the agglomeration of carbonaceous material onto the fiberglass, which experienced some delamination due to the synthesis method. Raman spectroscopy indicated that the obtained graphene exhibited a predominance of defects in its structure. Additionally, Atomic Force Microscopy (AFM) analyses revealed the formation of graphene layers with varying levels of porosity.

The coronavirus disease (COVID-19) pandemic caused by spreading rapidly a severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has imposed a unique situation for the humanity. Sao Paulo has reported 124,105 confirmed cases of COVID-19 and 5,623 deaths up to June 14th, being considered the epicenter of the pandemic in Brazil and in South America. Due to the measures for social distancing, there was a drop in the air pollution concentration in Sao Paulo. Starting on March 16th, 2020, we broke 90 days of social distancing into 13 weeks and compared to an equivalent period in 2019. We investigated the air quality improvement during the quarantine period and compared the associated avoided deaths to COVID-19 burden deaths. Nitrogen dioxide (NO₂) was the best indicator of air quality in the analyzed weeks, since its reduction reached 58 %. Our study showed that the 5,623 deaths occurred during the analyzed weeks of quarantine represents an economic health loss of US$ 10.5 billion. In opposite, we observed a significant air quality improvement due to pollutants concentrations’ reductions during the analyzed weeks. Considering PM₁₀, PM_2.5 and NO₂, the decrease of concentration levels respectively avoided 78, 337 and 387 premature deaths and prevented up to US$ 1.5 billion on health costs. These results highlight the importance of continuing to enforce existing air pollution regulations and measures to protect human health both during and after COVID-19 pandemic.