This work aims to investigate the effect of process temperature and catalyst content by pyrolysis and thermal catalytic cracking of (organic matter + paper) fraction from municipal household solid waste (MHSW) on the yields of reaction products (bio-oil, bio-char, H2O, and gas), acid value and chemical composition of bio-oils, and characterization of bio-chars, in laboratory scale. The collecting sectors of MHSW in the municipality of Belém-Pará-Brazil were chosen based on geographic and socio-economic database. The MHSW collected and transported to the segregation area. The gravimetric analysis of MHSW carried out and the fractions (Paper, Cardboard, Tetra Pack, Hard Plastic, Soft Plastic, Metal, Glass, Organic Matter, and Inert) separated. The selected organic matter and paper submitted to pre-treatment of crushing, drying, and sieving. The experiments carried out at 400, 450, and 475 °C and 1.0 atmosphere, and at 475 °C and 1.0 atmosphere, using 5.0, 10.0, and 15.0% (wt.) Ca(OH)2, in batch mode. The bio-oil characterized for acid value. The chemical functions present in bio-oil identified by FT-IR and the composition by GC-MS. The bio-char characterized by SEM, FT-IR and XRD. The variance in mass (wt.%) for organic fraction of municipal household solid waste, between 56.21 and 67.45% (wt.), lies with the interval of 56% (wt.) and 64% (wt.) of OFMHSW for middle and low income countries. The pyrolysis of MHSW fraction (organic matter + paper) show bio-oil yields between 2.63 and 9.41% (wt.), aqueous phase yields between 28.58 and 35.08% (wt.), solid phase yields between 35.29 and 45.75% (wt.), and gas yields between 16.54 and 26.72% (wt.). The bio-oil yield increases with pyrolysis temperature. For the catalytic cracking, the bio-oil and gas yields increase slightly with CaO content, while that of bio-char decreases, and the H2O phase remains constant. The GC-MS of liquid reaction products identified the presence of hydrocarbons (alkanes, alkenes, alkynes, cycloalkanes, and aromatics) and oxygenates (carboxylic acids, ketones, esters, alcohols, phenols, and aldehydes), as well as compounds containing nitrogen, including amides and amines. The acidity of bio-oil decreases with increasing process temperature and with aid Ca(OH)2 as catalyst. The concentration of hydrocarbons in bio-oil increases with increasing Ca(OH)2-to-MHSW fraction ratio due to the catalytic deoxygenation of fatty acids molecules, by means of de-carboxylation/de-carbonylation, producing aliphatic and aromatic hydrocarbons.

In this study, the gravimetric characterization and analysis of the solubilized extract of the organic fraction of Urban Household Solid Waste (RSDU) from the municipality of Belém do Pará was carried out in order to obtain the composition of the collected materials and the characteristics of the liquid resulting from the solubilization of these materials . The waste used to carry out this research was collected door-to-door, in which the points and neighborhoods served were determined through the sectorization of these locations and representative statistical sampling. For the sectorization of neighborhoods, family income values ​​were considered as the main parameter. After collecting the solid waste, the material was sent to the facilities of the Federal University of Pará (FUPa), where the waste was classified into paper, cardboard, tetrapak, rigid plastic, soft plastic, metals, glass, organic matter, waste toilets, fabrics and others. The organic fraction of solid waste was separated and sent to the drying, crushing and packaging processes. Subsequently, the solubilized extract of the organic fraction of solid waste was obtained, following the methodology recommended by NBR standard nº 10.006/2004, of the Brazilian Association of Technical Standards and the values ​​obtained were compared with Ordinance GM/MS nº 888/2021 and CONAMA Resolution nº 357/2005, in addition to results obtained by other authors. After carrying out the gravimetric characterization, it was possible to obtain the average proportions of 5.09% paper, 3.20% cardboard, 0.94% tetrapak, 3.58% rigid plastic, 9.97% soft plastic, 2.00% metals, 55.57% organic matter, 1.86% glass, 14.26% sanitary waste, 3.23% fabrics and 3.00% other waste. High values ​​of organic residues were found in the gravimetric composition, which can be explained by the collection method used and the high humidity of the organic solid residues. In the analyzes of the solubilized extract, values ​​of Hp (3.69 to 4.92), Turbidity (791 to 1,733 uT), Apparent Color (8,500 to 12,500 uC), True Color (6,000 to 14,000 uC), Total Dissolved Solids (5,330 to 8,040 mg/L), Total Nitrogen (201.80 to 359.90 mg/L), Ammoniacal Nitrogen (161 to 289 mg/L), Nitrate (10 to 40 mg/L), Total Phosphorus (52.30 to 166.80 mg/L) and Chemical Oxygen Demand (28,701 mg/L to 38,608 mg/L), in addition to other measured parameters, in which such information makes it possible to check the similarities of the waste solubilization conditions to that of leachates from landfills, in addition to not being in compliance with environmental and health legislation, demonstrating risks to the local environment and public health.

This article aimed to evaluate, using statistical tools, the generation and composition of urban solid waste (MSW) in the city of Belém, Pará, from nine urban collection sectors in the municipality, and the average nominal income of the population. Approximately 900kg of urban solid waste were col-lected from the municipality in the period from 2021 to 2022. Statistical tests were carried out on hypotheses with 5% significance in comparative evaluations, and their respective average nominal incomes. The results indicated that the organic fraction corresponds to 55.57% of the waste generated in the municipality, 14.26% is inert waste (potentially contaminating) and 0.67% is miscellaneous waste. It was observed that the waste generated by families with high purchasing power tends to contain higher percentages of recyclables, while in families with lower purchasing power the highest percentages tend to be organic. Knowledge of the generation of MSW is fundamental for the choice and dimensioning of operations and processes involved in the management chain at the municipal level. The decentralization of services offered based on solid waste management would enable greater success in serving the population.

We are experiencing an unprecedented urbanization process that alongside with physical, social and economic developments is having a significant impact on population’s health. Due to higher apprehensions of pollution, violence and poverty, our modern cities no longer ensure a good quality of life so they become unhealthy environments. This study aims to measure the socio-environmental and hematologic profile of residents of Santo André’s landfill – “Bairro Espírito Santo” by using the contextualization of the studied area. The research method is Observational type and from Retrospective cohort and by convenience sampling in Santo André in the Greater ABC region. The study determined a socio environmental profile and the hematologic diseases screening related to a close location to the landfill. The disease manifests itself within a broad spectrum of symptoms that causes changes in blood count parameters. The full blood counts analysis was performed, indicating that the blood counts of residents living near the landfill led to positive hematological changes and diseases like Leukopenia, Anemia, Neutropenia and lymphocytosis were the most common changes. However it is considered that the proof of the relation of cause- effect to environmental exposures that may trigger chronic manifestations in humans requires specific studies that are often complicated.

The primary sources of particulate matter are linked to human activity. Certain particulate emissions, particularly those of a finer nature, can significantly impact human health, making them one of the most concerning pollutants. Ultrafine particles (UFP), which have a diameter of less than 100 nm, are of particular concern due to their impact on human health and the difficulty in controlling them. The concentration of ultrafine particles (UFP) in the workplace is a growing concern and is classified as an emerging risk. Workers may be exposed to UFP through inhalation, skin absorption, ingestion, or a combination of these routes. This study aims to determine the levels of UFP exposure among workers in environments with varying direct particle emission patterns. Measurements were conducted to compare the results with the levels recommended by the WHO. The study monitored industrial workplaces with direct particulate matter emissions, such as a carpentry and a bakery, as well as social sector sites without or almost without direct particle emissions, such as a school and a health clinic. One conclusion drawn from this study is that all tasks and occupations are susceptible to high levels of UFP, exceeding WHO recommended values in virtually all monitored environments. Therefore, monitoring and controlling UFP is crucial. Further in-depth studies on this subject are also necessary..

Introduction: Sarcopenia, muscle loss, often coexists with MASLD, a common liver disorder, which is more prevalent in those with sarcopenia. Sarcopenia also increases the risk of liver conditions like steatosis and fibrosis. Studies on sarcopenia in MASLD are common in developed countries, but fewer follow the EWGSOP2 guidelines in Brazil. Aim: to assess sarcopenia prevalence in MASLD patients. Methods: Cross-sectional study conducted at the Gastroen-terology/Hepatology Service of ISCMPA with patients diagnosed with MASLD. The EWGSOP2 criteria were used to evaluate sarcopenia. Categorical data presented as absolute and relative frequency; parametric continuous data ex-pressed as mean±standard deviation; non-parametric continuous data as me-dian and IQR. Gender differences in were analyzed using Fisher's Exact Test or Chi-squared tests, and for continuous variables, T Student tests (parametric) and Mann-Whitney U tests for independent samples (non-parametric). The significance level was set at 5% (p<0.05). Results: The study involved 103 MASLD patients with an average age of 60.39 years, comprising 48 (46.60%) adults and 55 (53.40%) older individuals. Concerning sarcopenia diagnosis, four individuals exhibited decreased muscle strength; two had reduced MME (sarcopenia); and one showed decreased walking speed (severe sarcopenia). Among the participants, 63 (60.6%) were physically active. 35 (62.5%) had mild to moderate steatosis, while 21 (37.5%) had severe steatosis. In terms of EHNA, 13 subjects (24.08%) had moderate to severe EHNA. Regarding fibrosis classi-fication, 68 (72.34%) individuals had undetermined or high probability based on the NAFLD score, with higher prevalence in males (n=23; 88.5%). Fibrosis assessment via liver biopsy revealed 27 (28.72%) in F1 and F2 and 15 (16.96%) in F3 and F4. Stratification of fibrosis into F3 and F4 was more com-mon among men (n=9; 47.4%). Conclusion: Most of the population was physi-cally active. The parameters indicating sarcopenia exceeded the thresholds recommended by EWGSOP2. The prevalence of sarcopenia was low in individuals with MASLD.

Background: Sarcopenia, a subject of extensive research, has led to numerous clinical trials and systematic reviews (SR). These reviews aid healthcare professionals by summarizing results and conducting meta-analyses, enhancing reliability. However, the abundance of reviews complicates decision-making on sarcopenia management. To address this, SR of SR have emerged, consolidating data from various sources into comprehensive documents. Objective: to assess the isolated impact of dietary interventions on sarcopenia's diagnostic criteria for older individuals. Methods: a study protocol for a SR of SR, following Cochrane and PRISMA recommendations. The search strategy includes the MeSH ‘sarcopenia’ and its subheadings; ‘aged’ and its subheadings; ‘nutrition’ and its subheadings; and filter ‘systematic review’, performed at main databases. Selected studies must include older adults, submitted to nutritional interventions compared to control groups. Quantitative analyses will use inverse variance statistic method (random effects); the effect measures mean difference. Heterogeneity measured with Q-Test. Results: The results of this SR of SR will may provide valuable information about the sarcopenia treatment, deepening the knowledge about. Conclusion: this protocol is reproducible, requires low cost and personnel, and may allow a higher understanding on sarcopenia treatment and management on older people.

In this study, the analysis of metals in the solubilized extract of the organic fraction of Urban Solid Waste (MSW) from the municipality of Belém do Pará was carried out. The waste used in this research was collected in residential areas, through door-to-door collection, with the points and neighbor-hoods served in the municipality of Belém determined by the sectorization of these locations, with family income as the main parameter. The MSW was collected and transported to the segregation area. Gravimetric analysis of MSW was carried out and the selected organic and paper fractions were subjected to drying, crushing and sieving pre-treatment. Next, the solubilized extract of the organic fraction of MSW was obtained, following the method set out in NBR nº 10.006/2004 of the Brazilian Association of Technical Standards. The values obtained were compared with CONAMA Resolutions nº 357/2005, 396/2008 and 430/2011, in addition to being compared with results of bibliographical research. The results indicated that these wastes do not comply with environmental and health regulations. Although a highly significant association was found between chromium and boron through Pearson's correlation, the remaining strong correlations between other elements did not reach statistical significance. Furthermore, a similarity was observed in the solubilization conditions of these wastes with those found in landfill leachate.

The development of organic devices has been focused in their miniaturization in order to obtain denser and faster electronic circuits. The challenge is to build the devices adding atom by atom or molecule by molecule until the desired structure is achieved. To do this job, techniques able to see and manipulate matter at this scale are needed. Scanning tunneling microscopy has been the selected technique by scientists to develop smart and functional unimolecular devices. This review article compiles the latest developments in this field giving examples of supramolecular systems monitored and fabricated at molecular scale by bottom-up approaches using STM at solid/liquid interface.

Aiming the characterization of road dusts on the surrounding villages of an active mine and to assess metal(loids) bioaccessible fractions, a dust samples survey was undertaken. To achieve these objectives, pseudototal element concentration, mineralogical composition, Enrichment factor and in vitro extraction UBM assay for both gastric (G) and gastrointestinal (GI) phases, were determined. Results obtained revealed that arsenic represents the higher risk to humans, with mean pseudototal values higher than the maximum reference value range. Enrichment factor points to As significant to very high enrichment in all villages. Particles enriched in As, Ca, Fe, Cu, Al, Ti were identified by SEM-EDS in weathered agglomerates, linked to mine wastes and long-distance transport, both by wind and/or traffic. Arsenic bioaccessibility fraction (%BAF) presents low values in the studied samples, possibly due to low Fe complexes solubility with adsorbed As, limiting arsenic release and reducing its bioaccessibility. Concentrations of Cd bioaccessible G and GI phases are within the reference values range, while for Cu are above and for Pb are lower, than reference value range. Results show that the pseudototal fraction risk is overestimated when comparing to BAF (bioaccessible fraction), nevertheless, total G and GI risk are above the carcinogenic target risk (1.00E-06) in most samples. Carcinogenic risk of the bioaccessible contaminants shows that As is the element that represents higher risk for developing cancer over a lifetime, being ingestion the main risk route.

This paper provides a comparative study between microwave tomography and synthetic time-reversal imaging techniques as applied to ground penetrating radar (GPR) surveys. The comparison is carried out by processing experimental data collected at a controlled test site, with various types of buried targets at given subsurface depths and representative soil conditions. It is shown that the two techniques allow us to obtain complementary information about position, depth and size of the targets from a single GPR survey.

Usually, in ground-penetrating radar (GPR) datasets the user defines the limits between the useful signal and the noise through standard filtering to isolate the effective signal as much as possible. However, there are true reflections that mask the coherent reflectors that can be considered noise. In archaeological sites these clutter reflections are caused by scattering with origin in subsurface elements (e.g., isolated masonry, ceramic objects and archaeological collapses). Its elimination is difficult because the wavelet parameters similar to coherent reflections and there is a risk of creating artifacts. In this study a procedure to filtering the clutter reflection noise (CRN) from GPR datasets is presented. The CRN filter is a singular value decomposition-based method (SVD), applied in the 2D spectral domain. This CRN filtering was tested in a dataset obtained from a controlled laboratory environment, to establish a mathematical control of this algorithm. Also, it has been applied in a 3D-GPR dataset acquired in the Roman villa of Horta da Torre (Fronteira, Portugal), which is an uncontrolled environment. The results show an increase in the quality of archaeological-GPR planimetry that were verified via archaeological excavation.

We show that low quality of all 427 Brazilian SARS-CoV-2 genomes recently published in Science (1) challenges their phylogenetic inference and may lead to incorrect typing of viral strains in clades with no statistical support. Absence of basecalling quality in genome assemblies and proper phylogeny parameter estimates preclude the assessment of signal-to-noise ratio in the data, downstream analysis and conclusions.

Starting 1994, the debate for regulating organic agriculture in Brazil was officially recognized in May 1999. Still, only in 2003, when the law # 10,831 was instituted, the country reached an effective milestone on organic production, both internally and externally. Since the industry regulation, the legislation underwent many modifications, constantly reviewing and adjusting. The current study examined the institutionalization of organic production in Brazil and what the current regulations can be used as a reference for those interested in this sector. The most recent update of Organic legislation and its implication on practice were also discussed. A case study on production of strawberry in organic system is presented and discussed.

The Roman villa of Pisões (Beja, Portugal), was part of the Lusitanian colony of Pax Iulia. This place stands out for the predominance of the water element in several structures of the villa, highlighting the balneum and the large natatio, one of the largest known in Roman Hispania. The records of the initial excavations that took place since 1967 do not allow the establishment of clear functionalities of the villa. The University of Évora, owner of the site, conceived an action plan for the requalification and enhancement of the archaeological site. One of the tasks aims to investigate using Applied Geophysics. This work analyses the landscape directly related to the villa, given that it is in the flooded area of a river, with a Roman containment dam. It is uncertain whether the water supply comes from this structure or other nearby springs. The use of ground-penetrating radar, combined with unnamed aerial vehicles, all integrated in a geographic information system, allows us to know the location of underground water connections and create a topographic model with high resolution. Considering all the information, we propose a model for the water transport inside the villa and estimate the location of the water supply.

Renewable Energy Communities (RECs) are emerging as an effective concept and model to empower the active participation of citizens on the energy transition, not only as energy consumers, but also as promoters of environmentally friendly energy generation solutions. This paper aims to contribute to the management and optimization of individual and community Distributed Energy Resources (DER). The solution follows a price and source-based REC management program, in which consumers day-ahead flexible loads (Flex Offers) are shifted according to electricity generation availability, prices and personal preferences, to balance the grid and incentivize user participation. The heuristic approach used in the proposed algorithms allows the optimization of energy resources in a distributed edge and fog approach with a low computational overhead. The simulations performed using real world energy consumption and flexibility data of a REC with 50 dwellings show an average cost reduction of 10.6% and an average increase of 11.4% in individual self-consumption. Additionally, the case-study demonstrates promising results regarding grid load balancing and the introduction of intra-community energy trading.

The COVID-19 pandemic initiated a race to determine the best measures to control the disease and to save as many people as possible. Efforts to implement social distancing, the use of masks, and massive vaccination programs turned out to be essential in reducing the devastating effects of the pandemic. Nevertheless, the high mutation rates of SARS-CoV-2 challenge the vaccination strategy and maintain the threat of new outbreaks due to the risk of infection surges and even lethal variations able to resist the effects of vaccines and upset the balance. Most of the new therapies tested against SARS-CoV-2 came from already available formulations developed to treat other diseases, so they were not specifically developed for SARS-CoV-2. In parallel, the knowledge produced regarding the molecular mechanisms involved in this disease was vast due to massive efforts worldwide. Taking advantage of such a vast molecular understanding of virus genomes and disease mechanisms, a targeted molecular therapy based on siRNA specifically developed to reach exclusive SARS-CoV-2 genomic sequences was tested in a non-transformed human cell model. Since coronavirus can escape from siRNA by producing siRNA inhibitors, a complex strategy to simultaneously strike both the viral infectious mechanism and the capability of evading siRNA therapy was developed. The combined administration of the chosen produced siRNA proved to be highly effective in successfully reducing viral load and keeping virus replication under control, even after many days of treatment, unlike the combinations of siRNAs lacking this anti-anti-siRNA capability. Additionally, the developed therapy did not harm the normal cells, which was demonstrated because, instead of testing the siRNA in nonhuman cells or in transformed human cells, a non-transformed human thyroid cell was specifically chosen for the experiment. The proposed siRNA combination deeply reduced the viral load throughout the experiment and allowed cellular recovery, thus representing a potential innovation, to be considered as an additional weapon for therapy of COVID-19 and even other infectious diseases.

Healthcare professionals constantly face situations that reflect ecosystems’ degradation. These can negatively affect their mental health. Research suggests that hope and resilience can play an important role in this scenario, since they are related to/predict mental health in highly heterogeneous samples (considering geography, age, profession, health, etc.). In this context, the aims of the present study are: to characterize and explore the relationship between hope, resilient coping and mental health of Portuguese healthcare professionals. Using Google Forms, 276 healthcare professionals answered to the GHQ-28, the (adult) Trait Hope Scale, and the Brief Resilient Coping Scale (cross-sectional study). The minimum and maximum possible scores were reached, with the exception of the maximum score of GHQ-28-Total. Regarding Hope, 19.6% scored below the midpoint (M=43.46, SD=11.97); 29.3% revealed low resilience (M=14.93, SD=4.05); and the average of 4 of the 5 Mental Health scores (exception: Severe Depression) indicates the probability of a psychiatric case. Hope correlated with Social Dysfunction and GHQ-28-Total; resilient coping proved to be a (weak) predictor of 4 of the 5 GHQ-28 indicators (exception: Severe depression). The results support the need to promote the sample's mental health, hope and resilient coping. They also suggest that stimulating resilient coping may contribute to improving healthcare professionals’ mental health.

Fusarium wilt caused by Fusarium oxysporum f. sp. cubense (Foc) is one of the most destructive diseases in banana farming worldwide. Knowledge of the factors of genetic diversity and virulence of the pathogen contributes to the development of resistant cultivars and in management strategies based on exclusion. In this study, phenotypic traits such as virulence and aggressiveness in a sample of 52 Foc isolates, were analyzed and their relationship to the presence of putative effectors of gene SIX (Secreted in Xylem) pathogenicity homologues, verified. According to the dissimilarity matrix, there were three isolates closest to the standard Foc race 1 strain. Isolates 229A and 218A, were selected according to their aggressiveness profile in 'Grand Naine' and 'Prata-Anã', respectively, I order to replace the standard isolate of race 1 in the resistance screening process carried out by the breeding program. Two homologues of the SIX8 gene, SIX8a and SIX8b, are present in isolates of Foc from Brazil and the SIX8b gene correlates with avirulence in the cultivar ‘Grand Naine’ (Cavendish). These results are important to support the banana genetic breeding program by identification of sources of resistance to Foc and contribute in the establishment of the function of SIX effector proteins.

In this work we report recent theoretical calculations of a superconducting island in a strong vortex confinement regime. The obtained results reveal the evolution of superconducting condensate as a function of electron mean-free path (l) with the evolution of an applied magnetic field H0. The results of this study provide an insight about the emergent superconducting properties under such conditions, using the Ginzburg-Landau numerical simulations where spatial variation of thickness d on island, omnipresent in these kind of structures grown on Si (111), is taken into account. These results offer a new route to tailor superconducting circuits by using the controlled bombardment, in order to explore the impact on vortex distribution, phase of order parameter, number of vortices, free energy and the first H1 and second critical field H2.

Porphyry copper-molybdenum deposits (PCDs) are the world’s most important source of copper, molybdenum and rhenium. Previous studies have reported that some PCDs can have sub-economic to economic grades of critical metals, i.e., those elements that are both essential for modern societies and subject to the risk of supply restriction (e.g., platinum group elements (PGE), rare earth elements (REE), In, Co, Te, Ge, Ga, among others). Even though some studies have reported measured concentrations of Pd and Pt in PCDs, their occurrence and mineralogical form remain poorly constrained. Furthermore, these reconnaissance studies have focused predominantly on porphyry Cu-Au deposits, but very limited information is available for porphyry Cu-Mo systems. In this contribution, we report the occurrence of critical metal (Pd, Pt, Au, Ag, and Te) inclusions in copper sulfides from the world’s largest PCD, the supergiant Río Blanco-Los Bronces deposit in central Chile. Field emission scanning electron microscope (FESEM) observations of chalcopyrite and bornite from the potassic alteration zone reveal the presence of micro- to nano-sized particles (<1-10 μm) of noble metals, most notably Pd, Au, and Ag. The high-resolution data show that these inclusions are mostly tellurides, such as merenskyite [PdTe2], Pd-rich hessite [Ag2Te], sylvanite [(Ag, Au)Te2] and petzite [Ag3AuTe2]. The data point to Pd (and probably Pt) partitioning in copper sulfides during the high-temperature potassic alteration stage, opening new avenues of research aimed at investigating not only the mobility of PGE during mineralization and partitioning into sulfides, but also at evaluating the potential of porphyry Cu-Mo deposits as a source for noble metals.

Fogo (Fogo island, Cape Verde Republic) is the youngest and most active volcano of the archipelago. The last eruption occurred in 2014–2015. Aiming at studying dust emissions and transport during the eruption period and assessing their impact on air quality and human health, a mineralogical and chemical characterization was undertaken in outdoor dust from all over the island, as well as in the lava resulting from this event. Air quality monitors were used to obtain concentrations of atmospheric particulate matter (PM) and gaseous pollutants. The mineralogical constitution of the samples was analysed by X-ray diffraction and Electron Microprobe, while the chemical characterization was performed through X-ray Fluorescence Spectrometry and ICP-MS. The volcanic rock was found to be tephritic to basanitic, with high potassium content. Several minerals were identified, such as titanian augite with ilmenite, basaltic hornblendes, pyrrhotites, apatites, pyroxenes, basaltic hornblendes and hematites. Concentrations of the particulate matter inhalable fraction (PM10) exceeded the 24-hour mean of 50 µg/m3 recommended by the World Health Organization. Nevertheless, total volatile organic compounds (TVOCs) showed levels lower than the worrying range. The highest levels of CO2 were recorded in more populated villages and farthest from the volcano. The Pollution Load Index (PLI) for outdoor dust collected on rooftops was always above 1, suggesting enrichment, with higher values in the dust size fraction < 63 µm. In the same way, the Contamination Factor pointed to high enrichment of As, Ni and Pb, and very high enrichment of Cd in the same size fraction. The Non-carcinogenic Hazard Quotient and Hazard Index estimated for Children suggest that health problems may arise. The Carcinogenic Risk, for all size fractions, was above the target risk. The element that most contributed to the global risk was As, followed by Pb and Co. Ingestion was the main exposure route for all size fractions. The dust size fraction that represented the highest risk was < 63 µm, mostly due to the As concentration.

INT-FFT algorithm presented in this work uses an interpolation methodology to densify 3D-GPR datasets to sharpen images obtained in GPR surveys obtained in an archaeological context. It allows the reconstruction of missing data from the combined use of mathematical transforms (e.g., the Fourier and Curvelet transform) and predictive filters. This technique makes it possible to calculate the missing signal simply by meeting two requirements: the data in the frequency domain must be limited in a range of values and must be able to be represented by a distribution of Fourier coefficients (verified conditions). The INT-FFT algorithm uses an open-access routine (Suinterp, Seismic Unix) to interpolate the GPR profiles based on seismic trace interpolation. This process uses automatic event identification routines by calculating spatial derivatives to identify discontinuities in space by detecting very subtle changes in the signal, thus allowing for more efficient interpolation without artifacts or signal deterioration. We successfully tested the approach using GPR datasets from the Roman Villa of Horta da Torre (Fronteira, Portugal). The results show an increase in the geometric sharpness of the GPR reflectors and have not produced any numerical artifacts. The tests performed to apply the methodology to GPR-3D data allowed for assessing the interpolation efficiency, the level of recovery of missing data, and the level of information lost when one chooses to increase the distance between profiles in the acquisition stage of the data.

All types of sports are potential application scenarios for automatic and real-time visual object and event detection. In rink hockey, the popular roller quad skate variant of hockey team sports, it is of great interest to automatically track player’s movements and positions, player’s sticks and, also, making other judgments, such as being able to locate the ball. In this work, we introduce a real-time pipeline composed by an object detection model, created specifically for rink hockey games, followed by a knowledge-based event detection module. Even in the presence of occlusions and quick motions, our deep learning object detection model effectively identifies and tracks, in real-time, important visual elements such as: ball; players; sticks; referees; crowd; goalkeeper; and goal. Using a curated dataset composed by a collection of videos of rink hockey, comprising 2525 annotated frames, we trained and evaluated the algorithm performance and compare it to state of the art object detection techniques. Our object detection model, based on YOLOv7, presents a global accuracy of 80%, and presents a good performance in terms of accuracy and speed, according to our results, making it a good choice for rink hockey applications. In our initial tests, the event detection module successfully detected one important event type in rink hockey games, the occurrence of penalties.

Trehalose, a disaccharide made of two D-glucose molecules, is found in various organisms like bacteria, yeast, fungi, insects, and plants. It serves as an energy and carbon source in plants and has signaling functions in yeast and plants, affecting metabolic pathways and growth regulation. It also plays a role in protecting proteins and cell membranes from damage caused by stress. This study aims to determine the best level of trehalose supplementation in layer diets between 34 to 49 weeks of age, due to limited literature on its impact on laying hen productivity. Experimental diets were based on nutritional recommendations and included six trehalose levels. The study was conducted over five periods of 21 days each, evaluating various parameters such as feed intake, egg production, egg quality, and bone characteristics. The results showed that trehalose supplementation influenced the performance of laying hens, as well as some aspects of egg and bone quality.

Studies show that executive functions and motor development are associated among each other and with learning ability. A more technological lifestyle, related with digital culture, should be considered an important component to stimulate children. In addition, digital games constitute an element of the digital culture in which children are inserted. The aim of this study is to present a systematic mapping of the literature involving executive functions, motor development and the use of digital games in intervention programs for elementary school children, from 6 to 11 years old. Four databases were searched: PubMed, Scielo, Science Direct and SCOPUS, including publications between 2012 and March 2021. The initial results indicated 4881 works. After the selection process, 15 investigations that presented the central theme of the study were selected. The main results indicate that intervention strategies are quite heterogeneous. Most of the studies demonstrated significant positive effects after intervention protocols and were conducted in Europe and 46% of the studies were conducted in a school environment. No researches were identified that involved technological solutions involving executive functions, motor development and digital games in an integrated manner, constituting a field of future scientific research.

The pharmaceutical industry is one of the largest pollutants and generator of toxic solvent resi-dues for the environment and human beings. In the last decade, there has been a huge evolution in the design and development of new environmentally friendly products and processes, in re-sponse to the global environmental concern and the growing demand for products with quality ingredients and manufacturing processes aimed at achieving sustainability. Consumers are looking for products with the benefits of natural products, with sustainable and environmentally friendly formulations with few synthetic molecules as possible. Thus, based on the origins of the pharmaceutical industry, it is important to return to Nature and enjoy the benefits that natural products bring to us. Deep eutectic solvents appear as an alternative to toxic solvents commonly used to extract bioactive compounds. These solvents are considered green solvents because they are made up of natural compounds such as sugars, amino acids, and carboxylic acids. In addition, they are simple to prepare, with an atomic economy of 100%, with attractive physicochemical properties. This paper is a comprehensive review in which is described the main properties, characteristics, and production methods of deep eutectic solvents as well as its application to extract from natural sources bioactive compounds with pharmaceutical interest.

Leishmaniasis is a group of neglected infectious, non-contagious diseases caused by parasites of the Leishmania genus which affects millions of people worldwide. The drugs available for its treatment, especially in cases of visceral leishmaniasis, are old, outdated, have serious side effects and in many cases are ineffective due to the emergence of resistant strains. In this context, the search for new candidates for more effective and safer drugs which can become new therapeutic alternatives is a constant need. In this work, 10 new chalcones were synthesized in high yields through Claisen-Schmidt condensation and were evaluated in vitro against Leishmania infantum promastigotes and amastigotes. CP04 and CP06 compounds were the most promising, respectively showing IC50 values = 13.64 ± 0.25 and 11.19 ± 0.22 against promastigotes, and IC50 = 18.92 ± 0.05 and 22.42 ± 0.05 against amastigotes. The compounds did not show cytotoxicity in erythrocytes, showing selectivity indexes greater than 74 and 90. Molecular docking studies carried out under the sterol 14-alpha demethylase (CYP-51) (PDB: 3L4D) and trypanothione reductase (PDB: 5EBK) enzymes from L. infantum evidenced the great affinity of the CP04 molecule for these targets, showing Moldock score values of -94.0758 and -50.5692 KJ/mol-1, with these values being much lower than the co-crystallized ligand energies. Molecular dynamics simulations demonstrated great stability of CP04 in its targets, thus indicating a real interaction possibility. Our findings confirm the potential that chalcones have as candidates for anti-leishmania drugs, and suggest that the CP04 compound may become a promising drug candidate to design and develop novel chalcone-based analogs for leishmaniosis therapy.

Data on helminth parasites and epizoites is presented for the long-beaked and short-beaked common dolphins from the Southeast Pacific. Sampling in 1985-2000 was conducted mainly at six fishing ports in Peru and Ecuador where cetaceans were landed. From a total of 473 common dolphins sampled, we identified helminths including three species of Trematoda: Nasitrema globicephalae, Pholeter gastrophilus and Braunina cordiformis; three species of Nematoda, which includes Anisakis spp., Crassicauda sp. and Halocercus sp.; and two cestodes Tetrabothrius forsteri and Clistobothrium delphini (formerly Phyllobothrium delphini). No acanthocephalans were observed. No statistically significant sexual and ontogenetic variation in helminth prevalence was detected after which samples were pooled. The highest prevalence in the long-beaked common dolphin (n=440) was observed for N. globicephalae (96.3%) in cranial sinuses, Crassicauda sp. (83.3%) in mammary glands, Crassicauda sp. (78.8%) infesting the cranial sinuses, followed by Cl. delphini (28.6%) in the blubber and P. gastrophilus and B. cordiformis (20.4%) in the digestive tract. Although comparative testing was unfeasible due to minimal samples of short-beaked common dolphin (n=33), several of the same helminth species were found, but not N. globicephalae nor B. cordiformis. No cyamids were encountered while pseudo-stalked barnacles Xenobalanus globicipitis were common. No new (global) helminth host records are revealed for common dolphins, but this study presents a first checklist of parasites separately for the Southeast Pacific long-beaked and short-beaked common dolphins. Future work should include exhaustive laboratory-based necropsies, enhanced sampling of the short-beaked form, focus on intermediate hosts and parasitic pathology, including potential human health impact from consumption of small cetaceans.

The quality of veterinary medicinal products (VMP) is essential for efficient disease management. Therefore, VMPs that do not meet the required standards of quality can lead to increased sickness, death, and the development of antimicrobial resistance, posing a danger to both animals and humans. This study aimed to identify substandard and falsified VMPs on the Rwandan market using the Global Pharma Health Fund (GPHF)-Minilab™. VMP samples were purchased and collected in a cross-sectional study from veterinary retail pharmacies from five districts in four provinces of Rwanda, during May and June 2023. These samples were transported to the Veterinary Laboratory of the School of Animal Sciences and Veterinary Medicine, Nyagatare campus, University of Rwanda, and stored until analysis. The samples were subjected to physical and chemical analysis following the GPHF-Minilab™’s guidelines. A total of 130 samples from two categories of VMP were purchased from 10 veterinary retail pharmacies in urban and rural areas. The results of this study revealed that none of the assessed VMP samples failed physical tests (visual inspection, weight verification, and disintegration test). 10 samples (Sulfamethoxazole/Trimethoprim) out of 130 (7.7%) passed the visual inspections but later failed to comply with Thin-Layer Chromatography result specifications. This is an indication of the presence of substandard and falsified VMP circulating in Rwanda that warrants regular inspection and chemical quality control of VMPs along the supply chain.

The Douro Demarcated Region (DDR) has peculiar edaphoclimatic characteristics that provide a suitable terroir for premium wine production. As climate change effects continue to emerge, ensuring productivity and quality becomes increasingly important for viticulturists, as those directly determine their profits. Cultural approaches, such as the use of biostimulants, are actively being developed to mitigate abiotic stress. The main objective of this work was to assess the effect of foliar sprays of a seaweed (Ascophyllum nodosum) based extract (ANE) and glycine betaine (GB) on grape berry quality, bioactive compounds, and antioxidant activity. A trial was installed in a commercial vineyard (cv. Touriga Franca) in the Douro Superior (Upper Douro) sub-region of the Douro Demarcated Region. In 2020, a total of three foliar sprayings were performed during the growing season, namely at pea-size, bunch closure, and veraison. There was a positive effect of both biostimulants (ANE and GB) on the physiological and biochemical performance of cv. Touriga Franca exposed to summer stress. In general, the GB 0.2% spraying was the most promising treatment for this grape cultivar, as it increased berry quality, the concentration of bioactive compounds (total phenolics, flavonoids and ortho-diphenols), and the antioxidant activities. These results revealed the efficacy of biostimulants sprayings as sustainable viticultural practice, improving berry quality under summer stress conditions.

Fruits of chayote [Sechium edule (Jacq.) Swartz] are widely consumed in Mesoamerica, but little is known about the nutraceutical potential. This study aimed to determine the chemical compositions, antioxidant activities from the juice fruits from two commercial varieties of chayote cultivated in Mexico, as well as a proposal for the elaboration of chayote juices with stevia leaves and pineapple juice. The physicochemical properties of juice from virens levis (VL) and nigrum spinosum (NS) varieties were determined using standard methods. The juice of the two varieties differ significantly regarding the concentrations of total soluble solids, total sugars, but not vitamin C. The total concentration of phenolics in NS extracts was slightly higher than in VL (1005 and 856 mg 100 g⁻¹ dry-weight, respectively) but the total flavonoid contents were similar (27 and 26 mg 100 g⁻¹ dry-weight, respectively). Cucurbitacin D was predominant in both varieties. The radical scavenging capacities of VL and NS extracts varied slightly (IC50 = 0.45 to 0.65 mg mL⁻¹), while the antioxidant activities were similar (~80%). The NS variety is particularly promising regarding nutraceutical application. The chayote juice combined with stevia and pineapple maintain the original nutraceutical characteristics from the fruit, but enhanced the organoleptic characteristics like density and sugar/acidity balance.

In this work, the cross-linked PMMA-based dental resins scraps were submitted to pyrolysis to recover MMA (Methylmethacrylate). The thermal degradation of cross-linked PMMA-based dental resins scraps was analyzed by TG/DTG to guide the operating conditions in pilot scale. The pyrolysis experiments carried out in a reactor of 143L, at 345, 405, and 420°C, 1.0 atmosphere. The reaction liquid products obtained at 345°C, physicochemical characterized for density, kinematic viscosity, and refractive index. The chemical composition of liquid products obtained at 345°C, 30, 40, 50, 60, 70, 80, and 110 minutes, at 405°C, 50, 70, and 130 minutes, and at 420°C, 40, 50, 80, 100, 110, and 130 minutes determined by GC-MS. The experiments show that liquid phase yields were 55.50%, 48.73%, and 48.20% (wt.), at 345, 405, and 420°C, respectively, showing a smooth sigmoid behavior, decreasing with increasing temperature, while that of gas phase were 31.69%, 36.60%, and 40.13% (wt.), respectively, increasing with temperature. The liquid products density, kinematic viscosity, and refractive index obtained at 30, 40, 50, 60, 70, 80, and 110 minutes, varied between 0.9227 and 0.9380 g/mL, 0.566 and 0.588 mm2/s, and 1.401 and 1.414, respectively, showing percentage deviations between 0.74 and 2.36%, 7.40 and 10.86%, and 0.00 and 0.92%, respectively, compared to standard values for density, kinematic viscosity, and refractive index of pure MMA at 20 °C. The GC-MS identified in the reaction liquid products at 345, 405, and 420°C, 1.0 atm, esters of carboxylic acids, alcohols, ketones, and aromatics, showing concentrations of MMA between 83.454 and 98.975% (area.). For all the depolymerization experiments, the concentrations of MMA in the liquid phase, between 30 and 80 minutes, reach purities above 98% (area.), decreasing drastically with increasing reaction time after 100 minutes, thus making it possible to depolymerize the cross-linked PMMA-based dental resins scraps by pyrolysis to recover MMA. The optimum operating conditions to achieve high MMA concentrations, as well as elevated yields of liquid reaction products were 345 °C and 80 minutes.

Flood events are becoming more severe, causing significant problems to human communities, including physical, psychological, and material damage. For both flood forecasting in emergency response situations and flood mapping, georeferencing and data curation are paramount in the context of prevention or preparedness. Hence, data display, data management, and articulation with numerical simulation results must occur on GIS platforms. Our research is motivated by recent advances in Web and GIS technologies, social sensing and high-performance computing, and an envisaged wider availability of remote sensing data. This paper presents and discusses an innovative Web GIS platform named "RiverCure Portal" or "RCP" for short. This platform combines observations and hydrodynamic modelling tools to support various stages of the flood risk management cycle, including operational response, emergency preparedness, and risk assessment. RCP is a multi-organisation, multi-context digital platform with flexible configuration features to define and support multiple sensor types and modelling options, satisfying the various needs of different organisations and stakeholders. In addition, this paper discusses the RiverCure Approach, which encompasses the following tasks directly supported by the RCP platform: defining the context and involved geometries, associating sensors to the context, pre-processing and generating the context mesh, defining the simulation event, running the simulation event, and analysing the results from the simulation event. Thus, the RCP streamlines and simplifies data analysis and simulation procedures to meet decision-makers' needs. The novelties discussed in this paper include the design and discussion of a Web GIS platform that allows (i) to manage flood data and results of simulations at several contextual levels by different stakeholders such as domain experts, decision-makers, researchers, or students; (ii) to process and curate sensed data obtained from physical and social sensors; and (iii) update the state and values of the parameters of simulation tools through continuous data assimilation techniques for forecasting purposes. Finally, this paper supports the explanation and discussion with a running example, "Águeda 2016 flood" event, which dataset is publicly available for further study and experimentation.

Traumatic nerve injuries are common lesions that affect several hundred thousand humans, as well as dogs and cats. The assessment of nerve regeneration trough animal models may provide information for translational research and future therapeutic options that can be applied mutually in veterinary and human medicine, in a one health perspective. This review offers a hands-on vision about the non-invasive and conservative approaches on peripheral nerve injury, focusing the role of neurorehabilitation in nerve repair and regeneration. The peripheral nerve injury may lead to hypersensitivity, allodynia and hyperalgesia, with the possibility of joint contractures, decreasing functionality and impairing the quality of life. The question remains regarding how to improve nerve repair with surgical possibilities, but also considering electrical stimulation modalities by modulating sensory feedback, upregulation BDNF, GFNF, TrKB and adenosine monophosphate, maintaining muscle mass and modulating fatigue. This could be improved by the positive synergetic effect of exercises and physical activity with locomotor training, and other physical modalities, such as low-level laser therapy and ultrasounds. In addition, the use of cell-based therapies is an innovative treatment tool in this field. These strategies may help avoiding situations of permanent monoplegic limbs that could lead to amputation.

In bone tissue engineering, ceramics have been the choice due to their excellent biological properties. But the paradigm changed with the discovery of bioactive glasses (BGs) in 1969 by Larry Hench and co-workers, due to their ability to bond to living tissues through the formation of an interfacial bone-like hydroxyapatite layer when the bioglass was put in contact with biological fluids in vivo. Among a number of tested compositions, the one exhibiting the highest bioactivity index is the well-known trademarked 45S5 Bioglass®. The topic received increasing attention particularly after 1985 when this material entered in the market of biomedical devices, inspiring many other investigations aiming at further exploring the in vitro and in vivo performances of this BG, or developing other related BG compositions. The research efforts gradually revealed a number of shortcomings of 45S5 Bioglass®, mostly derived from its high sodium content, initially intended to decrease the melting temperature and accelerating the degradation of the silicate network over time. But the extensive release of sodium from 45S5 Bioglass® in the biological fluids creates a high pH cytotoxic environment. Other serious drawbacks include a fast degradation rate, and a poor sintering ability, which hinders the reliable fabrication of porous scaffolds. Therefore, sol-gel was regarded as an attractive alternative to prepare alkali-free BG compositions. The process uses inorganic and/or organic precursors, which undergo hydrolysis and condensation at room-temperature, being less costly. When properly conducted, the sol-gel process might result in amorphous structures with all the components intimately mixed at the atomic scale. Moreover, developing new better performing materials for bone tissue engineering is a growing concern, as the ageing of the world’s population leads to lower bone density and osteoporosis. This work describes the sol-gel synthesis of a novel quaternary silicate-based BG with the composition 60 SiO2 – 34 CaO – 4 MgO – 2 P2O5 (mol%) was prepared using acidified distilled water as single solvent. By controlling the kinetics of the hydrolysis and condensation steps, an amorphous glass structure could be obtained. The results of XRD of samples calcined within the temperature range from 600-900 ºC demonstrated that amorphous nature was maintained until 800 ºC, followed by partial crystallization at 900 ºC. The specific surface area, an important factor in osteoconduction, was also evaluated over different temperatures, ranging from 160.6 ± 0.8 m2/g at 600 ºC down to 2.2 ± 0.1 m2/g at 900 ºC, being accompanied consistent changes in average pore size and agreeing pore size distribution. The immersion of the BG particles in simulated body fluid (SBF) led to the formation of an extensive apatite layer on its surface. These overall results indicate the proposed material is very promising for biomedical applications in bone regeneration and tissue engineering.

Climate change will pose a challenge for the winemaking sector worldwide, bringing progressively drier and warmer conditions and increasing the frequency and intensity of weather extremes. The short-term adaptation strategy of applying biostimulants through foliar application serves as a crucial measure in mitigating the detrimental effects of environmental stresses on grapevine yield and berry quality. The aim of this study was to evaluate the effect of foliar application of a seaweed based biostimulant (A. nodosum – ANE) and glycine betaine (GB) on berry quality, bioactive compounds, antioxidant activity, and elucidated their action on the secondary metabolism. A trial was installed in a commercial vineyard (cv. ‘Touriga Franca’) in the Cima Corgo (Upper Corgo) sub-region of the Douro Demarcated Region. A total of four foliar sprayings were performed during the growing season: at flowering, pea size, bunch closer, and veraison. There was a positive effect of GB in the berry quality traits. Both ANE and GB increased the synthesis of anthocyanins and other phenolics in berries and influenced the expression of genes related to the synthesis and transport of anthocyanins (CHS, F3H, UFGT, MATE1 and GST). So, they have the potential to act as elicitors of secondary metabolism, leading to improved grape quality, but also sets the foundation for sustainable agricultural practices in the long run.

Among the many Lysosomal Storage Disorders (LSDs) that would benefit from the establish-ment of novel cell models, either patient-derived or genetically engineered, is Mucopolysaccha-ridosis type II (MPS II). In fact, even though a specific therapeutic approach does exist for this disorder (Enzyme Replacement Therapy, ERT, with recombinant human IDS) and haematopoiet-ic stem cell transplantation (HSCT) may also hold promise whenever the disorder is diagnosed soon enough, both approaches have their own drawbacks. Here we present our results on the establishment and characterization of two MPS II pa-tient-derived stem cell line(s) from deciduous baby teeth. To the best of our knowledge, this is the first time a stem cell population is isolated from LSD patient samples obtained from the oral cavity. Taking into account our results on the molecular and biochemical characterization of those cells and our first insights on their subcellular MPS phenotype, we consider these cells will be a valuable tool for both pathophysiological assessments and drugs screenings. Ultimately, we believe patient-derived dental pulp stem cells (DPSC) may represent a feasible alternative to induced pluripotent stem cells (iPSC) in many labs with standard cell culture con-ditions and limited (human and economic) resources.

This work aims to investigate the influence of reaction time and catalyst-to-residual fat ratio by catalytic upgrading from pyrolysis vapors of residual fat at 400 °C and 1.0 atmosphere, on the yields of reaction products, physicochemical properties (density, kinematic viscosity, and acid value) and chemical composition of bio-oils, over a catalyst fixed bed reactor of activated carbon pellets impregnated with 10.0 M NaOH, in semi pilot scale. The experiments were carried out at 400 °C and 1.0 atmosphere, using a process schema consisting of a thermal cracking reactor of 2.0 L coupled to a catalyst fixed bed reactor of 53 mL, without catalyst and using 5.0, 7.5, and 10.0% (wt.) activated carbon pellets impregnated with 10.0 M NaOH, in batch mode. Samples of liquid phase products were withdrawn during the course of reaction at 50, 60, 70, 80, 90, 100 and 120 minutes in order to investigate the process kinetics. The physicochemical properties (density, kinematic viscosity, and acid value) of bio-oils were determined by official methods. The chemical composition of bio-oils determined by GC-MS. The thermal catalytic cracking of residual fat show bio-oils yields from 55.55 to 30.22 (wt.%), aqueous phase yields between 2.83 and 3.19 (wt.%), solid phase yields between 13.56 and 9.75 (wt.%), and gas yields from 27.89 to 55.60 (wt.%). The yields of bio-oil decreases from 74.41 to 30.22% (wt.) with increasing catalyst-to-Tallow kernel oil ratio, while that of gaseous phase increases from 12.87 to 55.60% (wt.). For all the thermal and thermal catalytic cracking experiments, the density, kinematic viscosity, and acid value of bio-oils decreases as the reaction time increases varying from 0.9266 to 0.8220 g/cm³, 8.10 to 2.24 mm²/s, and 144.14 to 2.37 mg KOH/g. The GC-MS of liquid reaction products identified the presence of hydrocarbons (alkanes, alkenes, ring-containing alkanes, ring-containing alkenes, and aromatics) and oxygenates (carboxylic acids, ketones, esters, alcohols, and aldehydes). For all the pyrolysis and catalytic cracking experiments, the hydrocarbon selectivity in bio-oil increases with increasing reaction time, while those of oxygenates decrease, reaching concentrations of hydrocarbons up to 95.35% (area.). The best results for the physicochemical properties density, kinematic viscosity, and acid value were 0.8220 g/cm³, 3.03 mm2/s, and 2.37 mg KOH/g, respectively, with a maximum hydrocarbon concentration of 97.194% (area.) and 2.806% ketones (area.) were obtained at 400 °C and 1.0 atmosphere, 80 minutes, without catalyst. For the catalytic cracking experiments, the maximum hydrocarbon content of 75.763% (area.) and 17.041% (area.) carboxylic acids, 4.702% (area.) ketones (area.), and 2.494% (area.) non-identified oxygenates was obtained at 400 °C and 1.0 atmosphere, 90 minutes, using a catalyst fixed bed reactor, with 10.0% (wt.) activated carbon pellets impregnated with 10.0 M NaOH as catalyst.

Ozonated oil has several benefits for humans, as it contributes to numerous interventions, maintaining the quality of life and the well-being of individuals. Being a natural product, it has few or almost no side effects. Thus, the study aimed to verify the sensitivity and/or resistance of fixed o “Ozonated” and “Non-Ozonated” oils from Mauritia flexuosa (Buriti), Carapa guaianensis (Andiroba) and essential “Ozonated” oils from Menta piperita (Mint), Eugenia caryophyllus (Clove) in different concentrations, against internationally known bacteria from the American Type Culture Collection – ATCC, comparing with the “Non-Ozonated” versions of the respective oils, using the Agar diffusion technique. Thus, it is evident that the ozonation of the fixed oils of Buriti and Andiroba, as well as the essential oils of Mint and Clove, provided significant results, although they were statistically different. The Buriti and Andiroba oil were ineffective in inhibiting microorganisms. On the other hand, the essential oil of Mint and Clove obtained similar activity of inhibition of microorganisms. With regard to Ozonation, the Essential Oil of “Ozonated” Clove provided greater activity than the “Non-Ozonated” one, which inhibited only one tested microorganism, in addition to producing changes in its chemical composition, requiring individualized studies for the ozonation of each essential oil.

The objective of the study was to predict the risk of exposure to ammonia concentration in the production of broiler breeds of slow and fast-growing with low and high production density and correlate with the incidence of health injuries in broiler chickens using a learning machine. Two commercial lines of broiler chicken were used, one with fast-growing (Ross®, slaughter age 42 days) and another with slow-growing (Hubbard®, slaughter age 63 days). All slow-growing birds were housed at a density of 32 kg/m2. Fast-growing birds were housed in two different housing densities: low housing density with a final housing density of 16 kg/m2 and high density with a final housing density of 32 kg/m2. A total of 1250 birds were used in this experiment, 450 of which were fast-growing birds and 800 were slow-growing birds. In each room, 306 birds were randomly distributed in 18 boxes (6 boxes for each treatment and 17 birds per box), each with 3 nipple drinkers and a manual feeder. The dimensions of the high-density boxes were 1 x 1.3 m2 , while the low-density boxes had the same number of animals housed in a larger area, with dimensions of 2 x 1.3 m2 . The remaining 319 birds were housed randomly throughout the room and outside the pens to simulate a commercial production system condition (stock density). All birds were fed with an initial commercial feed from day 1 to day 18 of the experiment, and from day 18 until the end, each breed was fed with different feeds according to their nutritional demands. The following data analysis steps were performed: data selection, pre-processing, transformation, mining, analysis, and, interpretation of results. The classification algorithms, decision tree (J48), SMO (Sequential Minimal Optimization), Naive Bayes, and Multilayer Perceptron were applied to the training and test data sets to build a rule model for predicting ammonia risk levels in broiler chickens. The cross-validation technique was used to parameterize the analysis in all models. From the database of the first phase of analysis, with the classifier to predict the risk condition of ammonia concentration, the Spearman correlation coefficient (ρ, rho), considering the presence of pododermatitis, vision/affected and mucosal injury, which includes assessments of the trachea, bronchi, lungs, eyes, paw injuries, and other injuries. A non-parametric correlation measure was applied to injury incidence data as a function of ammonia risk level (1 and 10 ppm) to correlate injury incidence and ammonia level in the conditions studied. The best predictive model capable of evaluating and obtaining better performance was the Multilayer Perceptron when we considered greater accuracy by the level of risk of exposure to ammonia in the broiler chicken production process, including fast and slow-growing. Birds exposed to higher levels of ammonia concentration have a higher correlation coefficient when the relationship between the variables is strong. The Spearman correlation coefficient shows a stronger association between increased risks of ammonia exposure and the incidence of chicken injuries.

This work aims to investigate the effect of process temperature and catalyst content by thermochemical degradation of municipal solid waste (MSW) fraction (organic matter + paper + plastic) on the yield of reaction products (bio-oil, biochar, H2O and gas), physi-cochemical properties and chemical composition of bio-oils, as well as on the morphol-ogy and crystalline phases of biochar in laboratory scale. The organic matter, paper and plastic segregated from the gravimetric composition of total waste sample were subject-ed to the pre-treatments of drying, crushing and sieving. Thermal pyrolysis was per-formed at 400, 450 and 475 °C and 1.0 atmosphere, and catalytic pyrolysis at 450°C and 1.0 atmosphere, using 5.0, 10.0 and 15.0% (wt.) of FCC zeolite, bath mode, using a laboratory-scale borosilicate glass reactor. The bio-oil was characterized for acidic val-ue. The chemical functions present in the bio-oil identified by FT-IR and the composi-tion by GC-MS. Biochar was characterized by SEM/EDS and XRD. Thermal pyrolysis of the MSW fraction shows bio-oil yields between 9.44 and 9.24% (wt), aqueous phase yields between 21.93 and 18.78% (wt), solid phase yields between 67.97 and 40.34% (wt) and gas yields between 28.27 and 5.92% (wt). The bio-oil yield decreased with in-creasing process temperature. For the experiments using FCC, the biochar and gas yields slightly increased with increasing FCC content, while that of bio-oil decreased and the H2O phase remained constant. GC-MS of bio-oils identified the presence of hy-drocarbons and oxygenates, as well as nitrogen-containing compounds including am-ides and amines. The acidity of the bio-oil increased with increasing temperature and with the aid of FCC as a catalyst. The presence of hydrocarbons in bio-oil was identified by the addition of FCC catalyst due to the deoxygenation of carboxylic acids, followed by decarboxylation and decarbonylation reactions, producing aliphatic and aromatic hydrocarbons.

We report four allelic variants (3 novel) in three genes previously established as causal for hypopituitarism or related disorders. A novel homozygous variant in the growth hormone gene, GH1 c.171delT (p. Phe 57Leufs * 43), was found in a male patient with severe isolated growth hormone deficiency (IGHD) born to consanguineous parents. A SOX3 allelic variant (p.Met304Ile) was found in a male patient with IGHD and hypoplastic anterior pituitary. YASARA, a tool to evaluate protein stability, suggests that p.Met304Ile destabilizes the SOX3 protein (ΔΔG = 2.49 kcal/mol). A rare, heterozygous missense variant in the TALE homeobox protein gene, TGIF1 (c.268C>T:p.Arg90Cys) was found in a patient with combined pituitary hormone deficiency (CPHD), diabetes insipidus, and syndromic features of holoprosencephaly (HPE). A novel heterozygous TGIF1 variant (c.82T>C:p.Ser28Pro) was identified in a patient with CPHD, pituitary aplasia and ectopic posterior lobe. Both TGIF1 variants have an autosomal dominant pattern of inheritance with incomplete penetrance. In conclusion, we have found allelic variants in 3 genes in hypopituitarism patients. We discuss these variants and associated patient phenotypes in relation to previously reported variants in these genes, expanding our knowledge of the phenotypic spectrum in patient populations.

Technology has transformed aeroponics, providing numerous advantages over traditional soil-based agriculture. However, there remains a need for comprehensive information on the types of technology employed in aeroponics and their impact on the growing process. This paper presents a literature review of 47 studies published between 2012 and 2023 in peer-reviewed journals and conference proceedings. As a result, it identifies the status and tendencies in the usage of technology in aeroponics as well as the main opportunities and challenges. Furthermore, this paper introduces the Technology Adoption and Integration in Sustainable Agriculture (TAISA) model. TAISA is a model that identifies the degree of technology integration in any sustainable agriculture system to determine how technology affects production and quality. Overall, the systematic review suggests that technology can play a vital role in improving the efficiency and sustainability of aeroponic farming. However, careful consideration must be given to the costs and technical requirements associated with using these technologies. Moreover, the TAISA model reveals that technology has primarily been employed in creating new processes that are not possible to implement without the help of technology. Therefore, we conclude that technology use has taken root in aeroponics and can be promoted to improve sustainable agriculture.

This research explores the depolymerization of waste polymethyl methacrylate (PMMAW) from dental material in fixed-bed semi-batch reactors, focusing on three production scales: laboratory, technical, and pilot. The study investigates the thermal degradation mechanism and kinetics of PMMAW through thermogravimetric (TG) and differential scanning calorimetry (DSC) analyses, revealing a two-step degradation process. The heat flow during PMMAW decomposition is measured by DSC, providing essential parameters for designing pyrolysis processes. The results demonstrate the potential of DSC for energetic analysis and process design, with attention to standardization challenges. Material balance analysis across the production scales reveals a temperature gradient across the fixed bed negatively impacting liquid yield and methyl methacrylate (MMA) concentration. Reactor load and power load variables are introduced, demonstrating decreased temperature with increased process scale. The study identifies the influence of temperature on MMA concentration in the liquid fraction, emphasizing the importance of controlling temperature for efficient depolymerization. Furthermore, the research highlights the formation of aromatic hydrocarbons from the remaining char, indicating a shift in liquid composition during the depolymerization process. The study concludes that lower temperatures below 450 °C favor liquid fractions rich in MMA, suggesting the benefits of lower temperatures and slower heating rates in semi-batch depolymerization. The findings contribute to a novel approach in analyzing pyrolysis processes, emphasizing reactor design and economic considerations for recycling viability. Future research aims to refine and standardize the analysis and design protocols for pyrolysis and similar processes.

The focus of this work lies in the construction of monitoring system designed in the form of a patch using a long-lasting potentiometric electrolyte concentration sensor from metal electrodes, in a galvanic cell configuration Mg(s)|NaCl(aq)|Cu(s). Initially, a mathematical analysis was conducted on the expected sensor output through the Nernst equation. The experimental phase involved conducting controlled tests in the laboratory using various molar concentrations of sodium chloride (NaCl) in aqueous solution. Results showed that the electrolyte sensor allows for monitoring electrolyte levels in NaCl in the range of 0.02 to 1 M/L, with electrode lifespan exceeding 10 days. On the other hand, when patch is using human sweat during controlled exercise routines, it showed the sensor's capability for monitoring changes in the subjects' hydration levels in real time. The sensor output potential is greater than 1.7 volts when the sensor electrodes are in contact with human sweat, which is equivalent to measuring molar concentrations at normal hydration and moderately high hydration levels. Sensor results indicate that the system can function in a self-powered manner without external batteries. Additionally, the extended lifespan of its electrodes allows for continuous monitoring of imbalances in the human body, showcasing the system capability for long-term health assessment.

The Cobb angle is critical in assessing adolescent idiopathic scoliosis (AIS) patients. This study aimed to evaluate the error in selecting the cranial and caudal limit vertebrae on AIS digital X-rays of experienced and novice observers and its correlation with the error in measuring the Cobb angle and determining the length of the scoliotic curves. Using the TraumaMeter v.873 software, eight raters (four experienced and four novices) independently evaluated 68 scoliotic curves on 42 AIS X-rays across three sessions one month apart according to Hopkins’ criteria of absolute reliability. Two spine specialist experts using the Cobb method established the gold standard measurements. The percentage of error in the selection of the cranial vertebrae (the most-tilted vertebra above the apex) is higher than in the caudal vertebrae (the most-tilted vertebrae below the apex) (44.7%, CI95% 41.05-48.3 compared to 35%, CI95% 29.7-40.4). The error in the choice of the most tilted vertebrae, in number of vertebrae per scoliotic curve, was MBE (mean bias error) =0.45, CI95% 0.38-0.52 in the cranial and MBE=0.35, CI% 0.69-0.91 in the caudal. The percentage of errors in the choice of boundary vertebrae is lower for the experienced than for the novices, both in cranial and caudal. The experienced chose at least one boundary vertebrae incorrectly in 52% of the meas-urements and the novices in 65.1%. The error in the Cobb angle did not depend on the number of boundary vertebrae chosen incorrectly (r=0.198, p=0.111). Of the 50% of Cobb angle measurements closest to the actual value, 55.4% (454) were obtained by incorrectly selecting at least one boundary vertebra. There was a positive correlation (r=0.673, p=0.000) between the error in selecting the boundary vertebrae and the error in determining the length of the scoliotic curves. The error in quantifying the length of scoliotic curves was MBE=0.43, CI95% 0.35-0.51 vertebrae per curve. We can conclude that errors in selecting boundary vertebrae are common among experienced and novice observers, with a greater frequency of error in the cranial vertebrae. There is no correlation between the error in selecting the boundary vertebrae and the error in measuring the Cobb angle. Contrary to the consensus, the accuracy of determining the length of the scoliotic curve is limited by the Cobb method’s reliance on the correct selection of boundary vertebrae. Inappropriate choice of boundary vertebrae leads to an estimated error in determining the length of the scoliotic curves of 0.805 vertebrae for each boundary vertebra chosen incorrectly.

This paper presents a study on the influence of the frequency variation of a nonlinear1 control allocation technique execution, developed by the author [1], named by Fast Control2 Allocation (FCA) for the Quadrotor Tilt-Rotor (QTR) aircraft. Then, through Software In The3 Loop (SITL) simulation, the proposed work considers the use of Gazebo, QGroundControl, and4 Matlab applications, where different frequencies of the FCA can be implemented separated in5 Matlab, always analyzing the QTR stability conditions from the virtual environment performed in6 Gazebo. TheresultsshowedthattheFCAneedsatleast200HzoffrequencyfortheQTRsafeflight7 conditions, i. e., 2 times smaller than the main control loop frequency, 400 Hz. Lower frequencies8 than this one would case instability or crashes during the QTR Operation.

The Eliezer and Gray physical interpretation of the Ermakov-Lewis invariant is applied as a guiding principle for the derivation of the special relativistic analog of the Ermakov-Milne-Pinney equation and associated first integral. The special relativistic extension of the Ray-Reid system and invariant is obtained. General properties of the relativistic Ermakov-Milne-Pinney are analyzed. The conservative case of the relativistic Ermakov-Milne-Pinney equation is described in terms of a pseudo-potential, reducing the problem to an effective Newtonian form. The non-relativistic limit is considered as well. A relativistic nonlinear superposition law for relativistic Ermakov systems is identified. The generalized Ermakov-Milne-Pinney equation has additional nonlinearities, due to the relativistic effects.

In this working paper we intended to address the emergence of what, potentially, will be a central concept in the very near future, Society 5.0 and that arises politically in (with) following the implementation of the concept of Industry 4.0. Society 5.0 proposes to deepen the potential of the individual-technology relationship in the promotion of the improvement of the quality of life of all people through a super smart society, is an extremely recent concept as a guiding social development that can have a profound impact in societies at all levels, such as quality of life and sustainability. It is a presentation that is based on very recent3 publications, but which also has a prospective component, which always generates some indetermination and uncertainty. Also, for this reason, it is a contribution that seeks above all else to contribute to this very urgent and necessary discussion.

The ceramic pastes of ca. 31 samples recovered from the Almaraz archaeological site, located in the south bench of Tagus River, were studied in detail using XRF, micro-Raman and GSDR spectroscopies, as well as the XRD technique. The ceramic sherds could be grouped into six categories, Red Slip tableware, Decorated tableware, Yellow Slip tableware, Grey tableware, Common tableware and Handmade pottery. Our studies of the mineralogic composition of the sherds` body indicate that all ceramics were produced locally, using silicious clays in most cases and calcareous clays in a few ones. Micro-Raman and ground state diffuse reflectance absorption spectroscopy provided useful information regarding the materials used to produce the coloured ceramics: hematite and brookite for the red slip and decorated ceramics, jacobsite or carbon black for the black decoration or grey ceramics. For the yellow slip tableware a simple engobe rich in yellow clay was used. XRF spectroscopic studies provided the elemental composition of all samples, and biplots of the Potassium (K) versus Calcium (Ca) contents, normalized to the silicon content of each ceramic paste, clearly show that Pliocene and Miocene local clays sources were used to produce most ceramics. Only one sherd can be considered a Lisbon production.

The giant challenge breeding flood-irrigated rice is to identify superior genotypes that present high-yielding with specific grain qualities, resistance to abiotic and biotic stresses, excellent adaptation to the target environment. Thus, the objectives of this study were to propose a bayesian multi-trait model, estimate genetic parameters, and select flood-irrigated rice genotypes with better genetic potentials in different evaluation environments. For this, twenty-five rice genotypes belonging to the flood-irrigated rice improvement program were evaluated. The grain yields, grain length, width and thickness, grain length, and grain width and weight of 100 grains in the agricultural year 2016/2017. The experimental design used in all experiments was a randomized block design with three replications. The Monte Carlo Markov Chain algorithm estimated genetic parameters and genetic values. The grain thickness trait was considered highly heritable, with a credibility interval ranging from: h^2: 0.9480; 0.9440; 0.8610, in environments 1, 2, and 3, respectively. The grain yields showed a low correlation estimate between grain thickness and 100-grain weight, in all environments, with a credibility interval ranging from (ρ= 0.5477; 0.5762; 0.5618 and 0.5973; 0.5247; 0.5632, grain thickness and 100-grain weight, in environments 1, 2, and 3, respectively). The Bayesian multi-trait model proved to be an adequate strategy for the genetic improvement of flood-irrigated. Genotypes 2 and 15 had similar potential in the three environments, they should be selected as high-performance multi-trait genotypes for the genetic breeding of flood-irrigated rice in the program.

This article aims to understand the domains and conceptual uses of contagion, its modalities and its effects, in its different historical contexts and meanings, as an expression of the process of interdependence between the positions and the different points of view of different actors involved in multiple scientific, moral, social and political challenges. Another objective focuses on understanding the process of collective management of contagion, disease and health, where prevention is an essential element of its objectives and justifications, its discursive order, as well as its practical activities.

Sociology and History as consolidated scientific and academic projects have maintained a peculiar and paradoxical relationship. The growing disciplinary and subdisciplinary specialization of these two sciences poses relevant epistemological and methodological challenges to face potential situations of isolation, fragmentation and enable the apology of an interdisciplinary perspective characterized by the historicity of social structures, actions and senses.Several types of reasons shape this diffuse process of approach/distinction between Sociology and History, namely, epistemological and methodological, disciplinary closure, academic, professional, configuring what can be called contained dialogues. This paper, starting from the sociological perspective of the authors, seeks to contribute to the reflection on the relevance of a scientific project aimed at affirming an interdisciplinary perspective that may foster the heuristic potentialities of both Sociology and History in the analysis of the complexity of social reality and human action.

Shot peening is an attractive technique for fatigue enhanced performance of metallic components, because it promotes crack initiation retardation and later crack growth. Engineering design based on fatigue crack propagation predictions applying the principles of fracture mechanics is commonly used in aluminum structures for aerospace engineering. The main purpose of present work was to analyze the effect of shot peening on the fatigue crack propagation of the 7475 aluminum alloy, under both constant amplitude loading and periodical overload blocks. The tests were performed on 4 and 8 mm thickness specimen's with stress ratios of 0.05 and 0.4. The analysis of the shot-peened surface showed a small increase of the micro-hardness values, due to the plastic deformations imposed by shot peening. The beneficial effect of surface peening on fatigue crack growth rates is quite limited to an increasing near the threshold. The specimens’ thickness has only marginal influence on the crack propagation, in opposite to the stress ratio. Periodic overload blocks of 300 cycles promotes a reduction of the fatigue crack growth rate for both intervals of 7,500 and 15,000 cycles.

A E. Crassipes is considered a problem in different aquatic ecosystems, due to its abundance could become a solution to design and build economic and efficient treatment plants, and especially for the production of biofuels such as bioethanol. The objective of this research is to design and implement a sustainable development process between phytoremediation and bioethanol production with E. crassipes, evaluating the incidence of chromium adhered to the biomass of this plant in the production of bioethanol. Materials and methods: A system was installed to evaluate the phytoremediation with E crassipes with water loaded with chromium, determining the effectiveness of this plant to remove this heavy metal even if it is alive in a body of water. After this process, we proceeded to bring the biomass loaded with chromium to bioreactors to evaluate the production of bioethanol, assessing three types of biomass, one without chromium adhered and the other two with chromium adhered to its plant structure. There was an impact of the ethanol production of the E crassipes due to the presence of chromium, but this production can be taken into account for the assembly of an integral system of phytoremediation and bioethanol production, making the most of this biomass.

Applying a procedure similar to that of E.S. Bring, by using a 4^th degree Tschirnhaus transformation, it was possible to transform the Bring-Jerrard normal quintic (BJQ) equation into a De Moivre form (DMQ), so that it could be solved by radicals. The general solution by radicals of the De Moivre equations of any degree is presented. By the same procedure the BJSx (normal sextic) equation was taken to another one without the 2^nd, 4^th and 6^th terms which was transformed into a cubic (solvable) equation. By applying a 6^th degree Tschirnhaus transformation to the BJSp (normal septic) equation its binormal (without the 2^nd, 3^rd, 4^th and 5^th terms) form was obtained.

Applying a procedure similar to that of E.S. Bring, by using a 4^th degree Tschirnhaus transformation, it was possible to transform the Bring-Jerrard normal quintic (BJQ) equation into a De Moivre form (DMQ), so that it could be solved by radicals. The general solution by radicals of the De Moivre equations of any degree is presented. By the same procedure the BJSx (normal sextic) equation was taken to another one without the 2^nd, 4^th and 6^th terms which was transformed into a cubic (solvable) equation. By applying a 6^th degree Tschirnhaus transformation to the BJSp (normal septic) equation its Bring-Jerrard binormal (without the 2^nd, 3^rd, 4^th and 5^th terms) form was obtained.

Subnational governments play a key role responding to climate change risks in terms of policy strategies and instruments. This article analyzes how Brazilian municipal and state governments have developed and implemented public policies to mitigate and to adapt to climate change risks. We surveyed all cities’ and states’ climate policies within the country. The methodological approach includes five main points of analysis: 1. mitigation targets and intentions; 2. adaptation actions; 3. stakeholders’ participation; 4. policy implementation; 5. participation in networks related to climate change. Our results suggest that even though subnational climate policies in Brazil are isolated initiatives within the national context, they play an important role responding to climate change risks in different scales and levels. The strongest Brazilian policies with both mitigation and adaptation actions counted on previous mobilization for the climate issue involving different stakeholders from several segments of the society. These governments have also participated in transnational cooperation networks related to climate change.

When there is uncertainty in the value of parameters of the input random components of a stochastic simulation model, two-level nested simulation algorithms are used to estimate the expectation of performance variables of interest. In the outer level of the algorithm (n) observations are generated for the parameters, and in the inner level (m) observations of the simulation model are generated with the value of parameters fixed at the value generated in the outer level. In this article, we consider the case in which the observations at both levels of the algorithm are independent, showing how the variance of the observations can be decomposed into the sum of a parametric variance and a stochastic variance. Next, we derive central limit theorems that allow us to compute asymptotic confidence intervals to assess the accuracy of the simulation-based estimators for the point forecast and the variance components. Under this framework, we derive analytical expressions for the point forecast and the variance components of a Bayesian model to forecast sporadic demand; and we use these expressions to illustrate the validity of our theoretical results by performing simulation experiments using this forecast model.

This paper presents additional results of the generalized bathtub model for urban networks, including a simpler derivation and exact solutions for uniformly distributed trip lengths. It is shown that in steady state this trip-based model is equivalent to the more parsimonious accumulation-based model, and that the trip-length distribution has merely a transient effect on traffic dynamics, which converge to the same point in the macroscopic fundamental diagram (MFD). To understand the statistical properties of the system, a queueing approximation method is proposed to compute the network accumulation variance. It is found that (i) the accumulation variance is much larger than predicted by traditional queueing models, due to the nonlinear dynamics imposed by the MFD, (ii) the trip-length distribution has no effect on the accumulation variance, indicating that the proposed formula for the variance might be universal, (iii) the system exhibits critical behavior near the capacity state where the variance diverges to infinity. This indicates that the tools from critical phenomena and phase transitions might be useful to understand congestion in cities.

Bone is a dynamic tissue with the capacity of repair and regeneration in specific conditions. Nevertheless, due to the increased incidence of bone disorders, the need of bone grafts has been growing over the past decades and the development of an ideal bone graft with optimal properties remains a clinical challenge. This review addresses the bone properties (morphology, composition and their repair and regeneration capacity) and puts the main focus on the potential strategies for developing bone repair and regeneration materials. It describes the requirements for designing a suitable scaffold material, types of materials (polymers, ceramics and composites) and techniques to obtain the porous structures (additive manufacturing techniques/robocasting or derived from marine skeletons) for bone tissue engineering applications. The main objective of this review is to gather the knowledge on the materials and methods for the production of scaffolds for bone tissue engineering and highlighting the potential of natural porous structures such as marine skeletons as promising alternative bone graft substitute materials without any further mineralogical changes, or after partial or total transformation into calcium phosphate. The suitability of the marine-derived porous bone graft substitutes for the intended applications will be also discussed.

There is an urgent need to develop new therapies for cancer treatment due to high rates of resistance and tumor relapse. Moreover, chemotherapy and radiation weaken the immune system and leave patients susceptible to sudden death from infections and organ failure since antineoplastic drugs lack specificity. Hence, scientists worldwide continue the search for natural alternatives with anticancer activities and fewer side effects. In this regard, traditional medicine offers strategies for preventing and treating numerous diseases and nowadays scientific studies worldwide highlight some of the mechanisms underlying their potential as an effective alternative for the management of cancer. In Mexico, Mayan healers have been prescribed mainly medicinal plants for more than 2,000 years. Furthermore, their ethnomedical knowledge has led to drug discovery or the development of herbal remedies. Medicinal plants from the genus of Cissus remain an important element of all indigenous medical systems in Mexico including the Mayan tribes in Yucatan, particularly for the management of gastrointestinal illnesses, sores, cutaneous diseases, and tumors. In this review, we present the reported bioactivities against cancer cells of the extract and compounds from the species of Cissus with a particular focus on recent studies on the phytochemistry of C. trifoliata which is widely distributed in Mexican territory and used for tumor management in traditional medicine.

This article analyzes laws, normative reforms and regulations surrounding the practices and mechanisms of control over the consumption, cultivation and commercialization of cannabis. On the one hand, I investigate regulatory practices that deny rights for the consumption of cannabis classified as recreational. On the other hand, I study regulatory practices that extend rights for the production, consumption and commercialization of cannabis classified as medicinal and industrial. The empirical moment is composed of four stages and methodological tools. First, I conduct an analysis of state policies. Then, I analyze nine laws and codes on cannabis regulation from 1970 to the present. Next, I perform five semi-structured interviews. Finally, I develop two life stories of former people deprived of their liberty for cannabis cultivation and trade. In this way, I trace forms of regulation on multiple demands, knowledge, interests and beliefs. This research focuses on state regulation. Cannabis regulatory regimes are conceived as constructions of political, social and economic truths, meanings and rights. In sum, the answer to the question of how collective demands around cannabis are regulated in Ecuador stipulates that state action reinforces stigmatization and criminalization. In addition, it legitimizes moral entrepreneurs and counter-movements around cannabis.

In the area of health, namely hospitals, we can agree that the intrinsic need to have multidisciplinary teams, highly specialized and indispensable resources leads us to a degree of complexity that requires, daily, the best performance, not running away from the logistics area to the rule. The centralization of resources, namely distribution warehouses, emerges as a challenge and possible solution for health institutions to respond in the best possible way to their main purpose: to put the right material in the right place at the right price in the right time space. As regards the advantages of this type of organization, there are several authors who argues that the need for human resources training, ease of coordination and the use of economies of scale are the main advantage. As far as the disadvantages are concerned, there is no special agreement on them, there are disparate factors from author to author, such as: routine, centralization, objectives or operation costs.

Given the importance of the development of urban infrastructure and environmental impacts produced by the civil construction waste (CCW), it is important to correct the handling of CCW with objective solutions that are more environmentally friendly. In that sense the present study aimed to determine indicators that make it possible to estimate the amount of CCW generated from construction sites in the city of Londrina, Parana State, Brazil. The generation of CCW was estimated in a general way, regarding the composition of its mixture, correlated to the gross areas of the buildings studied and their generated volumes of RCC. This generating rate was evaluated in a general way and specifies two types of sites: the new residential and new non-residential constructions. The data required for the development of these indicators was obtained through extensive survey and interviews carried out at the environment secretariat of the City Hall. The generating rate of CCW obtained for non-residential buildings was 0.2052m3/m2 or 170.44kg/m2, for new residential sites was 0.2054m3/m2 or 170.60kg/m2 and for new commercial or non-residential construction sites, it was 0.20453 m3/m2 or 169.85kg/m2. It was also possible to estimate the amount generated annually per inhabitant in the municipality, which is 0.60m3/inhabit.year or 498.55kg/inhabit.year.

Clinical training in medical schools in Spain is performed by rotations in university hospitals. During these internships, students are expected to acquire and master basic procedural skills. However, the assessment tools available rarely check whether these skills are completely acquired by the students. We have used an e-portfolio to determine the optimal number of times the students need to repeat a procedure to be able to perform it independently. The results were compared with the actual performance during the internships. An e-portfolio collected qualitative information about the internships. Quantitative information was also requested about the number of times each clinical skill was performed. Later, a survey asked these students and their teachers the optimal number of times each skill should be repeated before it could be considered fully acquired. The questionnaire was answered by 98.6% of the students and 70.3% of their teachers. Out of the 21 clinical skills and procedures selected, both students and their tutors agreed in a similar optimal value in 16 of them; only in five of them, teachers thought that students needed a greater number of times than that selected by the students. When these optimal values were compared with the actual values recorded in the portfolio during the internships, it was found that about half of the clinical skills were carried out less frequently than expected, thus providing an important feedback about the internships. Quantitative information collected in portfolios reveals a moderate mismatch between students and tutors perceptions of their training needs.

Platelet and fibrin-rich orthobiologic products, such as autologous platelet concentrates, have been extensively studied and appreciated for their beneficial effects in multiple conditions. PRP and its derivatives, including PRF, have demonstrated encouraging outcomes in clinical and laboratory settings, particularly in the treatment of musculoskeletal disorders such as OA. Although PRP and PRF have distinct characteristics, they share similar properties. The relative abundance of platelets, peripheral blood cells and molecular components in these orthobiologic products stimulate numerous biological pathways. These include inflammatory modulation, augmented neovascularization, and delivery of pro-anabolic stimuli that regulate cell recruitment, proliferation, and differentiation. Furthermore, the fibrinolytic system, which is sometimes overlooked, plays a crucial role in musculoskeletal regenerative medicine by regulating proteolytic activity and promoting the recruitment of inflammatory cells and MSCs in areas of tissue regeneration, such as bone, cartilage, and muscle. PRP acts as a potent signaling agent; however, it diffuses easily, while the fibrin from PRF offers a durable scaffolding effect that promotes cell activity. The combination of fibrin with hyaluronic acid, another well-studied orthobiologic product, has been shown to improve its scaffolding properties, leading to more robust fibrin polymerization. This supports cell survival, attachment, migration, and proliferation. Therefore, the administration of the "power mix" containing HA and autologous PRP + PRF may prove to be a safe and cost-effective approach in regenerative medicine.

In ref. [1], we pointed out that certain anomalies observed in the published data for ac magnetic susceptibility of a room temperature superconductor reported in Nature 586, 373 (2020) [2] would be cleared up once the measured raw data were made available. Part of the measured raw data were recently posted in arXiv:2111.15017 [3]. Here we report the results of our analysis of these raw data and our conclusion that they are incompatible with the published data. Implications of these results to the claim that the material is a room temperature superconductor are discussed.

In this paper any superalgebra is generalized to a new form, namely ultra algebra. We study some algebraic structure results for ultra algebras and we have defined some maps on ultra algebras to know ultra derivation and Jordan ultra derivation. Moreover on certain assumptions we have proved that Jordan ultra derivation is an ultra derivation.

A number of third order nonlinear processes can occur in single-mode fibres and an understanding of such phenomena is almost a prerequisite for actual lightwave-system designers. In this paper we review the main limitations imposed by several nonlinear effects, namely the self- and cross-phase modulation, four-wave mixing, stimulated Raman scattering and stimulated Brillouin scattering, on the performance of optical fiber communication systems.

Mandarins occupy the third group among citrus produced in Brazil. Primarily aimed at the fresh fruit market, commercial orchards have suffered significant losses in production, due to the high incidence of diseases, such as alternaria brown spot (ABS) and huanglongbing (HLB). The fact that 80% of the orchards are composed of two varieties, Ponkan mandarin and Murcott tangor, are highly susceptible to both diseases, demand intensive chemical control of the diseases in the field, which has resulted in a significant increase in production costs and a negative environmental impact. A total of one hundred and seventy-three mandarin accessions, including several species and hybrids, belonging to the Collections of the Instituto Agronômico de Campinas (IAC), were evaluated in the field, in an endemic location for the diseases. Evaluations of the incidence and severity of the diseases showed that there is a range of genotypes tolerant to ABS with potential to replace the current commercial varieties, mainly within the clementina and Willow leaf mandarin groups. Although with differences in incidence and susceptibility to HLB, there are no varieties tolerant to this disease, which significantly impacts the loss of fruit quality.

The combined influence of the North Atlantic Oscillation (NAO) and the East Atlantic (EA) patterns on the covariability of temperatures and precipitation in 35 stations of the Iberian Peninsula during the period 1950-2019 is analysed in this work. Four EA-NAO composites were defined from teleconnection patterns positive and negative phases: EA+NAO+, EA+NAO-, EA-NAO+, and EA-NAO-. Daily data of maximum and minimum temperature were used to obtain seasonal means (TX, and TN, respectively), and the covariability of these variables with accumulated seasonal rainfall (R) was studied comparing results obtained for different NAO and EA composites. Main results indicate slight differences in the spatial coverage of correlation coefficients between R and temperature variables, except in spring when the generalized negative relationship between R and TX under EA+NAO+ and EA-NAO- disappears under EA-NAO+ and EA+NAO- composites. This result may be useful to interpret and discuss historical reconstructions of Iberian climate.

Several review articles about megachurch studies have been published recently concentrating their work on USA, Europe, and other parts of the world, with just a few references about Latin American megachurches. For that reason, this article aims to identify some of the characteristics of Latin American Evangelical megachurches by looking at relevant literature, especially that produced in the region, in Spanish and Portuguese, which is usually overlooked by researchers in Global North. Since this research field is still limited in Latin America, areas, where further work is necessary, are identified. Three general catalysts for the emergence of megachurches in the region, church growth methodologies, Pentecostalization, and theologies of growth, serve as guides to organize the review process. The discussion shows several potential areas of research in a variety of fields such as theology, ecclesiology, organizational theory, leadership, gender studies, and ethics, are proposed from the review.

A major challenge in the clinical management of patients with mesial temporal lobe epilepsy (MTLE) is identifying those who do not respond to antiseizure medication (ASM), allowing for the timely pursuit of alternative treatments, such as epilepsy surgery. Here, we investigated changes in plasma metabolites as biomarkers of pharmacoresistance in patients with MTLE. Furthermore, we used the metabolomics data to gain insights into the mechanisms underlying MTLE and response to ASM. We performed an untargeted metabolomic method using magnetic resonance spectroscopy and multi- and univariate statistical analyses to compare data obtained from plasma samples of 28 patients with MTLE compared to 28 controls. The patients were further divided according to response to ASM: 20 patients were refractory to treatment, and eight were responsive to ASM. We only included patients using carbamazepine in combination with clobazam. We compared the group of patients with controls and found that the profiles of glucose (p = 0.01), saturated lipids (p = 0.0002), isoleucine (p = 0.0001), β-hydroxybutyrate (p = 0.0003), and proline (p = 0.02) were different in patients compared to controls (p &lt; 0.05). In addition, lipoproteins (p = 0.05), lactate (p = 0.05), glucose (p = 0.05), unsaturated lipids (p = 0.05), isoleucine (p = 0.05), and proline (p = 0.05), could discriminate between the two groups of patients classified according to response to ASM. The identified metabolites were linked to different biological pathways related to cell energy metabolism, and pathways linked to inflammatory processes and the modulation of neurotransmitter release and activity in MTLE. In contrast, we found that pyruvate metabolism may be linked to resistance to ASM. In conclusion, in addition to insights into the mechanisms underlying MTLE and the response to treatment with ASM, our results suggest that plasma metabolites may be used as biomarkers of disease and response to ASM in patients with MTLE. These findings warrant further studies exploring the clinical use of metabolites to assist in decision-making when treating patients with MTLE.

Alternaria brown spot (ABS) is a disease caused by the fungus Alternaria alternata f. sp. citri, which results in lesions on fruits, leaves, and branches of several mandarin varieties and their hybrids. Due to the high cost of fungicide application, alternative methods for controlling ABS need to be studied. Therefore, this study aimed to evaluate the use of essential oils (EOs) from different mandarin varieties to mitigate the effects of ABS. The inhibitory effect of different concentrations (1, 2, 4, 8, and 16 μL mL-1) of Fremont IAC 543 mandarin, IAC 2019Maria mandarin, Murcott IAC 221 tangor, and Late IAC 855 willowleaf. EOs on the in vitro mycelial growth of the fungus A. alternata was evaluated. Additionally, the curative and preventive effects of these EOs on ABS symptoms on detached leaves of Murcott IAC 221 tangor were also assessed. The EO of IAC 2019Maria mandarin induced less mycelial growth, and consequently, greater inhibition of the growth of the fungus A. alternata at a concentration of 16 μL mL-1. This EO was more effective in control than the other oils tested. In the detached leaf experiment, both the curative and preventive treatments at a concentration of 16 μL mL-1 showed lower values of disease severity.

In recent decades, many attempts have been made to automate the entire welding process, how-ever, there remain many non-automated welding operations that present a constant hazard to workers. This article presents an automated welding solution with collaborative robots, with this contribution, we intend to help companies in this sector increase productivity, improve quality, effectively reduce costs, and improve working conditions.

High concentrations of Na⁺ or [Co(NH₃)₆]³⁺ can induce the B to Z conformational transition in alternating (dC-dG) oligo and polynucleotides. The use of short DNA oligomers (dC-dG)₄ and (dm⁵C-dG)₄ as models can allow a thermodynamic characterization of the transition. Both form right handed double helical structures (B-DNA) in standard phosphate buffer with 115 mM Na⁺ at 25 ^oC. However, at 2.0 M Na⁺ or 200 mM [Co(NH₃)₆]³⁺, (dm⁵C-dG)₄ assumes a left handed double helical structure (Z-DNA) while the unmethylated (dC-dG)₄ analogue remains right handed under those conditions. We have previously demonstrated that the enthalpy of the transition at 25 ^oC for either inducer can be determined using isothermal titration calorimetry (ITC) [Ferreira, J. M. & Sheardy, R. D., Biophys. J. 2006, 91, 1–7]. Here, ITC is used to investigate the linkages between temperature, water activity and DNA conformation. We found that the determined enthalpy for each titration varied linearly with temperature allowing determination of the heat capacity change (DC_p) between the initial and final states. As expected, the DC_p values were dependent upon the cation (i.e. Na⁺ vs [Co(NH₃)₆]³⁺) as well as the sequence of the DNA oligomer (i. e., methylated vs unmethylated). Osmotic stress experiments were carried out to determine the gain or loss of water by the oligomer induced by the titration. The results are discussed in terms of solvent accessible surface areas, electrostatic interactions and the role of water.

Single Image Super Resolution (SSIR) is a problem in computer vision where the goal is 1 to create high-resolution images from low-resolution ones. It has important applications in fields 2 such as medical imaging and security surveillance. While traditional methods such as interpolation 3 and reconstruction-based models have been used in the past, deep learning techniques have recently 4 gained attention due to their superior performance and computational efficiency. This article proposes 5 an Autoencoder based Deep Learning Model for SSIR, in particular, a light model that uses fewer 6 parameters without compromising performance. The down-sampling part of the Autoencoder 7 mainly uses 3 by 3 convolution and has no subsampling layers. The up-sampling part uses transpose 8 convolution and residual connections from the down sampling part. The model is trained using a 9 subset of the VILRC ImageNet database. The model is evaluated using quantitative metrics PSNR, 10 SSIM as well as qualitative measures such as perceptual quality. PSNR and SSIM figures as high as 11 76.06 and 0.93 are reported.

This paper has a twofold objective. The first aim is to present a comprehensive bibliographical analysis of journal articles and book chapters on fuzzy-random option pricing (FROP) over the WoS and SCOPUS databases. It follows PRISMA criteria and takes special care of developments in continuous time. Thus, we described the principal findings about the research streams, outlets and authors of this topic and lets us suggest further research. The second contribution is motivated by the fact that the bibliographical revision has identified a lack of developments on equilibrium models on the yield curve. This question motivates extending Vasicek’s yield curve equilibrium model to introduce fuzziness in the parameters that govern interest rate movements (speed of reversion, equilibrium short-term interest rate, and volatility). Likewise, this paper develops an empirical application on the term structure of fixed income public bonds with the highest credit rating in the Euro area.

Angiogenesis is a process whereby new blood vessels are born from preexistent ones, which has a role in transporting oxygen and nutrients. On the other hand, inhibiting this process is a strategy used to treat some diseases, including cancers, diabetic retinopathy, and rheumatoid arthritis. This study investigates the effect of a new nutraceutical (Terasen®) on angiogenesis. Terasen® is made from a standardized extract of Euterpe oleraceae (Açaí), Myrciaria dubia (Camu-Camu), and purified oil of Bixa orellana (Annatto) and Astrocaryum aculeatum (Tucumã). The in vivo angiogenesis model used was the chorioallantoic membrane (CAM) from chicken embryos. The embryos were divided into seven groups: a vehicle control treated with ethanol solution (ETH), a naïve control treated only with saline solution (SOR), a positive control treated with dexamethasone (DEX), and four groups treated with Terasen® at different concentrations (0.5, 1, 2, and 3 mg/ml). The parameters assessed were the vessels’ area, length, and amount. The results show a statistically significant and concentration-dependent inhibition of angiogenesis caused by Terasen®. Our results suggest the nutraceutical has a high antiangiogenesis potential, possibly due to its bioactive compounds, including anthocyanins, quercetin, and tocotrienols.

This study takes as a starting point the importance and dependence of the media (Ball-Rokeach & DeFleur, 1976) to obtain information about the pandemic. The dependency theory of the media system was developed in the 1970s when mass media were the dominant source of information. Today, at a time when media choices have become abundant, studies are needed to understand the phenomenon of media dependence in light of new dimensions made important by the transformations that have taken place in the social and media fields - where the coexistence of mass media with social media platforms stands out. As large-scale crises rarely occur and the media environment changes rapidly, it is important to analyze how media dependence relates to choose and trust in different media (traditional media vs. social media) in times of crisis. Several questions arise. What is the trust attributed by individuals to social media as sources of information about the COVID-19? How well informed are the individuals who choose these sources as the main sources of information? From a questionnaire administered to 240 individuals in Portugal, during the first week of the state of emergency (March 2020), this research seeks to identify how people gained access to information about the COVID-19, how they acted critically towards the various sources and how they assess the reliability of different media. Finally, it analyzes the association between the type of medium chosen and adherence to misinformation content about the virus. The results reveal the existence of a phenomenon of dependence on the media, with a strong exposure (both active and accidental) to informative content, with conventional media being privileged as the main source, and positively distinguished in terms of confidence. Finally, a statistically significant association of a positive sign was identified between the use of social media as the main source and the acceptance of misinformation.

The nematode Angiostrongylus cantonensis has been reported worldwide, however, some basic questions remain unanswered about the presence of A. cantonensis in Ecua-dor: 1) Was the invasion of A. cantonensis in Ecuador unique, or did it occur in different waves? 2) Was this invasion as recent as historical records suggest? 3) Did this inva-sion come from other regions of South America or elsewhere? To address these issues, we assessed the genetic diversity of MT-CO1 gene sequences from isolates obtained in eleven of Ecuador's 24 provinces. Our Bayesian inference phylogenetic tree recovered A. cantonensis as a well-supported monophyletic group. All eleven sequences from Ec-uador were identical and identified as AC17a. The haplotype AC17a, found in Ecuador and the USA, formed a cluster with AC17b (USA); AC13 (Thailand); and AC12a-b (Cambodia). It is notable that all the samples, obtained in different geographic and climatic regions of different Ecuadorian provinces, had no genetic difference between them. Despite the lack of genetic information on A. cantonensis in Latin America, ex-cept in Brazil, our finding differs from previous studies by its absence of genetic diver-sity in Ecuador. We concluded that the invasion of A. cantonensis in Ecuador may have occurred: 1) as a one-time event, 2) recently, and 3) from Asia via the USA. Further re-search should include samples from countries neighboring Ecuador to delve deeper in-to this.

The vehicular ad hoc network (VANET) when augmented with internet is called internet of vehicles (IoV). In the IoV, vehicles have on board units (OBUs), use communication technologies and customized software to communicate with infrastructure around them. The vehicles can have permanent connectivity and global network awareness based on cloud computing. IoV technologies are still being assessed to ensure that the network is protected from attacks, supports a dynamic vehicular mobility scenarios and meets the low latency communication requirements between the vehicles and the surrounding infrastructure. To meet these strict Quality of Service (QoS) demands, Unmanned Aerial Vehicles (UAVs) play a vital role in IoV ecosystems. An UAV can serve as a mobile roadside unit (mRSU) to transmit data between vehicles, stationery RSUs and other UAVs. The UAVs have better line of sight (LOS) connections which result in better channel states and lower path loss than fixed RSUs. Although the inclusion of UAVs in vehicular networks has improved the system performance by providing better resource management and routing solutions, the traditional optimization techniques with their limitations are often not applicable. Therefore, in recent years, research community is integrating Artificial Intelligence (AI) and Machine Learning (ML) into UAV based IoV ecosystem to better manage resource allocation, routing and mobility management issues to optimize the overall network performance. In this survey paper we review the existing research done in AI/ML based UAV-IoV networks and communications with focus on resource management and routing from year 2019 to 2023. We have studied different AI techniques, their training attributes and architectures in various research works. The limitations of AI-based approaches in terms of required computational resources, availability of real world data and AI models’ complexity for the UAV-IoV environment are also discussed. Finally, the future directions for UAV-IoV research opportunities that can leverage the full potential of AI are presented.

This study examines the feasibility of using event-related potentials (ERPs) obtained from electroencephalographic (EEG) recordings as biomarkers for long-term memory item classification. Previous studies have identified old/new effects in memory paradigms associated with explicit long-term memory and familiarity. Recent advancements in convolutional neural networks (CNNs) have enabled the classification of ERP trials under different conditions and identification of features related to neural processes at the single-trial level. We employed this approach to compare three CNN models with distinct architectures using experimental data. Participants (N = 25) performed an association memory task while recording ERPs that were used for training and validation of the CNN models. The EEGNET-based model achieved the most reliable performance in terms of precision, recall, and specificity compared with the shallow and deep convolutional approaches. The classification accuracy of this model reached 70% for known items and 62% for unknown items. Good overall accuracy requires a trade-off between recall and specificity and depends on the architecture of the model and the dataset size. These results suggest the possibility of integrating ERP and CNN into online learning tools and identifying the underlying processes related to long-term memorization.

O26 enteropathogenic Escherichia coli (EPEC), possesses a unique pseudocapsule composed of polysaccharides identical to the O antigen in their lipopolysaccharide (LPS) membrane. Therefore, the impact of O26 polysaccharides on the immune evasion mechanisms of capsulated O26 EPEC was investigated. Our findings reveal that the concentration of GlcNAc, an immunodominant unit of O26 polysaccharides capable of activating the MBL (Mannose Biding Lecting) pathway of the complement system, was found to be lower in capsulated EPEC O26 compared to naked shiga toxin-producing E. coli (STEC) O26 strain. It was noted that, unlike the naked STEC strain, the capsulated EPEC O26 strain was protected against lysis by the alternative pathway of the com-plement system by inhibiting C3b adhesion to its bacterial surface. Capsulated EPEC O26 strains were also able to avoid phagocytosis by macrophages. However, the immune evasion provided by the capsule was overcome in the presence of anti-O26 polysaccharide antibodies. Additionally, these antibodies were able to recognize O26 EPEC in the presence of biofilm and inhibit their adhesion to human epithelial cells. Overall, the results indicate that the O26 polysaccharides can generate an effective humoral immune response, making them promising antigens for the de-velopment of a vaccine against capsulated O26 E. coli

Biodiversity conservation questions human practices towards biodiversity and, therefore, largely conflicts with ordinary societal aspirations. Decisions on the location of protected areas, one of the most convincing conservation tools, reflect such a competitive endeavor. Operations Research (OR) brings a set of analytical models and tools capable of resolving the conflicting interests between ecology and economy. Recent technological advances have boosted the size and variety of data available to planners, thus challenging conventional approaches bounded on optimized solutions. New models and methods are requested to use such a massive amount of data in integrative schemes addressing a large variety of concerns. Here, we provide an overview on the past, present and future challenges that characterize spatial conservation models supported by OR. By enlarging the spatial, temporal, taxonomic and societal horizons of biodiversity conservation planners navigate around multiple bio-socioeconomic equilibria and are able to decide on cost-effective strategies to improve biodiversity persistence.

COVID-19 is a well-known respiratory disease spreading worldwide since January 2020, causing many deaths and massive pressure on health systems. This pandemic’s appearance compromised the health services’ sustainability and quality as many procedures were postponed or even canceled out, with an expected increase of adverse events like nosocomial infections, in-hospital deaths, and the worsening of the patients’ clinical status. Therefore, assessing whether the healthcare providers’ performance has changed is paramount. In this case, we evaluated the public hospitals in Portugal as the leading secondary health care providers in the country, which in turn has been highly affected by the pandemic. To this end, we developed a network Data Envelopment Analysis model serially relating efficiency and effectiveness. Using 2,795 observations from public hospitals and 18 variables, we observed consistent drops in efficiency when the pandemic started, followed by a recovery to levels above the pre-pandemic ones. Regarding effectiveness, we observed a positive trend during the evaluated period. In short, these results allow us to conclude that, apart from the great resilience of public healthcare providers, the Portuguese State was not prepared for a pandemic like COVID-19, but still the actions taken (including massive vaccination) were beneficial.

This research work uses a simplified approach to combine location information from beacons propagation signal interaction with a mobile device with local building information to give real-time location and guidance to a user inside a building. This is an interactive process with visualisation information that can help user’s orientation inside unknown buildings and the data stored from different users can provide useful information about users movements inside a public building. Beacons installed on the building at specific pre-defined position emit signals that give a geographic position with an associated imprecision, related with Bluetooth’s range. This uncertainty is handled by building layout and users’ movement in a developed system that maps users’ position, gives guidance and store user movements. This system is based on an App (Find Me!) for Android OS (Operating System) which captures the Bluetooth Low Energy (BLE) signal coming from the beacon(s) and shows, through a map, the location of the user ‘s smartphone and guide him to the desired destination. Also, the beacons can deliver relevant context information. The application was tested by a panel of new and habitual campus users against traditional wayfinding alternatives yielding navigation times about 30% smaller, respectively.

In the field of forensic imaging, it is important to be able to extract a “camera fingerprint” from one or a small set of images known to have been taken by the same camera (image sensor). Ideally, that fingerprint would be used to identify an individual source camera. Camera fingerprint is based on certain kind of random noise present in all image sensors that is due to manufacturing imperfections and thus unique and impossible to avoid. PRNU (Photo-Response Non-Uniformity) has become the most widely used method for SCI (Source Camera Identification). In this paper, we design a set of “attacks” to a PRNU based SCI system and we measure the success of each method. We understand an attack method as any processing that alters minimally image quality and that is designed to fool PRNU detectors (or, generalizing, any camera fingerprint detector). The PRNU based SCI system was taken from an outstanding reference that is publicly available.

Peri-implant diseases are defined as pathological inflammatory reactions in the tissue surrounding the osseointegrated implants. They are classified into two categories: mucositis - defined as peri-implant soft tissue inflammation and peri-implantitis - bone loss in the peri-implant region. A clinical case of a 61-years-old woman with an implant in the 46 anatomical position and a 5-year follow-up is presented. A probe depth of 5mm and a bone defect length of 35% was observed. The Implacure® Protocol was applied, with the main objective of eliminating the biofilm present on the exposed implant surface. There are multiple approaches to treat peri-implant diseases. While non-surgical treatment is essential for mucositis control, the treatment of peri-implantitis surgical treatment should be considered. Regenerative bone reconstruction promotes bone repair in the defect area and reduces bleeding during probing. To achieve that, autologous fibrin combined with Cerasorb M® was used. The proposed approach in the exposed clinical case involves the application of Implacure® Protocol, whose combination of the physical decontamination technique, together with the use of chlorhexidine and orthophosphoric acid, added with the combination Piperacillin + Tazobactam together with hyaluronic acid, provide a base that allows to regenerate bone using platelet-rich fibrin with Cerasorb M® and increase the survival time of the implant.

In South Sudan, three case-control studies found a positive association between Nodding Syn-drome (NS) and a Mansonella perstans infection. To investigate whether M. perstans could play the primary and sole causal role in the development of NS, we examined blood films of persons with and without epilepsy in rural villages affected by NS in Mahenge, Tanzania, to identify M. perstans infections. Study participants were also examined for onchocercal nodules and skin lesions and tested for the presence of anti-O. volvulus antibodies (Ov16 ELISA). One hundred and thirteen epilepsy cases and 132 controls were enrolled, with a mean age of 28.3 years (interquartile range 22 – 34 years); 125 (51%) were females. Of the persons with epilepsy, 43 (38.1%) met the probable NS criteria. M. perstans infection was absent in all participants, but Ov16 prevalence and oncho-cerciasis-associated skin manifestations were positively associated with epilepsy, including probable NS. Onchocercal nodules in the mothers of cases were also positively associated with epilepsy. In conclusion, in contrast with O. volvulus, M. perstans is likely not endemic in Mahenge and therefore cannot be a co-factor for NS in the area. Hence, this filaria cannot be the primary and sole causal factor in the development of NS.

Climate changes caused by anthropogenic actions can directly and indirectly affect living beings, including parasites and their hosts. Changes such as water temperature, pH, distribution of nutrients in the aquatic environment are some examples that can interfere with the fish community, whether in open water or in production systems. In this review, we will show how climate change can affect the adaptation of hosts and parasites in the aquatic environment and how these parasites can be used for environmental monitoring.

Forecasting streamflow accurately is essential to achieve an efficient integrated water resources management strategy and provide consistent support to water decision-makers. We present a simple, low-cost and robust approach for forecasting monthly and yearly streamflow during the hydrological year in course, applicable to headwater catchments. It combines the use of regression analysis techniques, the two-parameter Gamma continuous cumulative probability distribution function and the Monte Carlo method. It is based on a probabilistic comparison of the progression of the current hydrological year with the historic observed series. The methodology has been successfully applied to two headwater reservoirs within the Guadalquivir River Basin in southern Spain. The root-mean-square error and correlation coefficient were used to measure the accuracy of the model and the results showed good levels of reliability. The outputs are the probabilistic monthly and yearly streamflow and 80% confidence interval. Further reductions in prediction errors may be achieved from increasing the number of observed years. These risk-based predictions are of great value, especially, before the intensive irrigation campaign starts (usually in April), when Water Authorities are to take responsible management decisions about the best allocation of the available water volume between the different water users and environmental needs.

Earthworms are iteroparous organisms with indeterminate growth, i.e. they continue to increase in size throughout their life and after completion of sexual development. Terrestrial oligochaetes vary greatly in size. Depending on the species, adult earthworms can reach between 10 mm and 3 m in length and between &lt;1 mm and &gt;25 mm in width, with most being of length 5-15 cm. Among the more than 7000 species described to date, very few (~20) reach lengths greater than 1 m. The longest earthworm on record is Amynthas mekongianus, which is found in the mud banks of the Mekong River in Southeast Asia and which reaches almost 3 m in length. It is about the same size as Megascolides australis, the ‘Giant Gippsland Earthworm’. These atypically giant earthworm species remain a scientific curiosity in terms of their biology, but they cannot be considered cases of gigantism. Gigantism occurs when organisms are much larger than normal or exhibit excessive growth. Earthworms obtain energy from the organic matter on which they feed, and their growth mainly depends on the quality of the resource and on the species, as well as on food availability, environmental factors, which can directly or indirectly affect growth by modifying food availability, and other factors such as competition. This is particularly evident in earthworms, which display indeterminate growth and large species-dependent variations in size. The biology, life cycle and growth and reproduction rates of Eisenia fetida (Savigny 1826) and Eisenia andrei (Bouché 1972), the earthworm species most commonly used in vermicomposting and vermiculture, have been widely reported. Here we present details of the enormous growth of individual specimens of Eisenia andrei and Dendrobaena hortensis reared under particular culture conditions and fed a special diet. Individuals almost 20 times the average weight of individuals of the species have been obtained. Possible explanations for this interesting phenomenon are discussed.

In this article the galactic rotation curve is analyzed as an effect of an accelerated reference frame. This phenomenon is the strongest evidence for the so called dark matter. We show that a non-inertial reference frame could explain the experimental data. We also show that general relativity is not enough to complete explain that which encouraged alternatives paths such as the MOND approach. Considering the effect of dark matter as a realization of accelerated reference frames is a simple but powerful hypothesis.

Introduction: Biofuels, biohydrogen and bioethanol have properties that stand out from other fossil fuels, are colorless, odorless, and insipid, therefore, they are free of contaminants. Its production can be generated from the biomass of the aquatic plant Eichhornia crassipes, since this alternative is timely and viable due to its high energy composition. This plant is a problem in wetlands, rivers and other hydrosystems, due to its abundance and dominance over other species of aquatic plants, and which in effect causes an ecological imbalance. Objective: To evaluate the production of biohydrogen and bioethanol from the biomass of the E. crassipes plant. Materials and methods: Lignocellulosic material was used, realizing different physical, chemical and biological processes such as: reduction of size, lignin removal, acid hydrolysis, fermentation and distillation. a laboratory scale production system was designed and built where two bioreactors were used in the process. Results and discussion: the production of bioethanol and biohydrogen showed a production index of more than 40 mg of bioethanol per gram of bio-mass of E. crassipes and in relation to biohydrogen, 65 mmol / L was obtained. Conclusion: With the biomass of E. crassipes it is possible to obtain a high index of bio-fuel production, since it is possible to take advantage of its physical characteristics and its high proliferation in hydrosystems, in this way it constitutes an optimal alternative to produce biohydrogen and bioethanol at a high scale.

It was recently shown that urban networks might exhibit two different critical points, one for the percolation of congested links through the network, and another one for the flow of vehicles through the network. It was observed that the percolation critical point happens after the flow critical point, where network throughput is maximized. This result is important because if a causal relationship exists between these two processes, it can be leveraged for improving control methods to avoid network collapse. This paper presents the results of numerical experiments to understand the possible causal relationship between the percolation and flow processes by focusing on the relative timing between the two critical points. The goal is to understand the impacts of important factors such as: (i) urban network type: long- and short-block networks, (ii) signal timing control type: fixed, random, responsive, and (iii) route choice: turning proportions at intersections. We find that the threshold density $k^*_c$ to determine if a link is congested has the main impact on the timing of the percolation transition, where lower values trigger earlier transitions. This implies that $k^*_c$ can be set such that the percolation transition happens before the flow critical point, opening the door for improved congestion management strategies. If $k^*_c$ is set to the average network critical density, maximum network throughput happen simultaneously with the percolation transition. Surprisingly, it appears that these results, and more generally, the relationship between the percolation and flow processes is independent of (i) and (ii) above.

The ceramic sherds from approximately 20 samples of lead-glazed tableware, recovered from diverse archaeological sites, including three repurposed storage pits transformed into dumpsters within the medieval city of Santarém (13th-14th century), underwent a meticulous examination. This investigation utilized techniques such as micro-Raman, ground state diffuse reflectance absorption, and X-ray fluorescence spectroscopies, in addition to X-ray diffraction and stereomicroscopy. A parallel study was conducted on contemporaneous European ceramics (glazed sherds) sourced from archaeological sites dating back to the 13th-15th centuries in Saintonge (France), Ardenne, Zomergem, and Bruges (Belgium), as well as Surrey-Hampshire, Kingston, and Cheam (England). The colour of the ceramic bodies is predominantly white or whitish, with a few exhibiting a vivid red hue. Ceramic sherds with a light paste composition were likely crafted using kaolin clays as raw materials. Analyses of fabric, mineralogical, and elemental composition of the sherds suggest that the majority of Santarém's glazed ceramics were locally or regionally produced, potentially derived from a Pliocene kaolin-rich sand formation. However, this conclusion is not supported by the absence of discovered lead glaze kilns or workshops in Santarém for the late Middle Ages. A distinctive feature from the European workshop ceramics lies in the quartz temper content and fabric.

Human bocavirus (HBoV) is an emerging virus that has been detected worldwide that could be associated with cases of acute gastroenteritis (AGE). However, its contribution to AGE has not been elucidated. This study aimed to describe the frequency, clinical features, and HBoV genotypes circulation in children up to 5 years with or without AGE symptoms in Acre, Northern Brazil. A total of 480 stool samples were collected between January and December 2012. Fecal samples were used for extraction, nested PCR amplification, and sequencing for genotyping. Statistical analysis was applied to verify the association between epidemiological and clinical characteristics. Overall HBoV-positivity was 10% (48/480), being HBoV-positivity rates of 8.4% (19/226) and 11.4% (29/254) recorded among diarrheic and non-diarrheic children, respectively. The most affected age group was between 7 and 24 months (50%). HBoV infection was more frequent in children living in urban areas (85.4%), using water from the public network (56.2%), and living with adequate sewage facilities (50%). Co-infection with other enteric viruses was 16.7% (8/48) and the most prevalent coinfection was RVA+ HBoV (50%, 4/8). HBoV‐1 was the most frequent species detected, responsible for 43.8% (21/48) of cases, followed by HBoV-3 (29.2%, 14/48) and HBoV-2 (25%, 12/48). In the present study, HBoV infections are not associated with AGE, as most HBoV cases belonged to the non-diarrheal group without AGE symptoms. Future studies are warranted to determine the role of HBoV in causing acute diarrhea disease.