In the Northeast of Portugal, like in many parts of the world, most soils are acidic, which may hamper crop productivity. This study presents the findings of a factorial experiment involving three factors: i) soil type [schist (Sch) and granite (Gra)]; ii) cultivars [Cobrançosa (Cob) and Arbequina (Arb)]; and iii) fertilizer treatments [liming (CaCO3) plus Mg (LMg), P application (+P), B application (+B), all fertilizing materials combined (Con+), and an untreated control (Con-)]. Dry matter yield (DMY) did not show significant differences between cultivars, but plants grown in schist soil exhibited significantly higher biomass compared to those in granite soil. Among the treatments, +B and Con+ resulted in the highest DMY (50.8 and 47.2 g pot-1, respectively), followed by +P (34.3 g pot-1) and Con- (28.6 g pot-1). Treatment LMg yielded significantly lower values (15.6 g pot-1) than Con-. LMg raised the pH above 7 (7.36), leading to a severe B deficiency. Although Con+ also raised the pH above 7 (7.48), it ranked among the most productive treatments for providing B. Therefore, when applying lime to B-poor sandy soils, moderate rates are advised to avoid inducing a B deficiency. Additionally, it seems prudent to apply B after lime application.

This article provides a comprehensive analysis of the global gas and liquefied natural gas (LNG) markets. The article begins by discussing the increasing demand for gas and LNG, particularly in Asia, as countries aim to transition to cleaner sources of energy. It explores how market volatility has led to energy security interventions and lasting economic and emissions impacts. It then explores the global supply and demand dynamics, highlighting the structural change expected in the market and the competition between Europe and Asia for limited new LNG supply. The article also focuses on Europe's increased flexibility and dependence on LNG imports, which have risen by 60% to 121 million tonnes, offsetting lower Russian pipeline imports. Furthermore, the article delves into global supply and demand dynamics, how the market is expected to remain tight, and how record gas and LNG prices have led to demand reductions. Additionally, it analyzes the future outlook and investment needs, highlighting the continued uptake of gas in heavy-duty transport and the need for further investment to avoid a supply-demand gap. The article concludes with an analysis of the implications for the future of the global gas and LNG markets.

Kaolin protective effect was assessed in a white grapevine cultivar ‘Cerceal’ in ‘Alentejo’ Region (southeast Portugal) where plants face extreme conditions during summer season. We addressed the hypothesis that kaolin effects lead to several changes in leaves, fruits and wine characteristics on the primary and secondary metabolism. Results showed that kaolin reduces leaf temperature which provoke an improvement in physiological parameters such as net photosynthesis and water use efficiency. This protection interferes with berries colour, leaving them more yellowish, and an increase in phenolic compounds were observed in all fruit tissues (skin, seed and pulp). Also, both berry and wine characteristics were strongly affected, with an increase of tartaric and malic acid and consequently high total acidity, while the sugar concentration decreased 8.9% in berries provoking a low wine alcohol level. Results also showed that kaolin induces high potassium, magnesium and iron, and low copper and aluminum concentrations. Moreover, the control wine showed higher content of esters related with hostile notes whereas wine from kaolin treated vines presented higher content of esters associated with fruity notes. Overall, the results strengthen the promising nature of kaolin application as summer stress mitigation strategy protecting grapevine plants and improving fruits quality and more balanced wines.

Tail-sitters aim to combine the advantages of fixed-wing and rotor-craft, but demand a robust and fast stabilization strategy to perform vertical maneuvers and transitions to and from aerodynamic flight. The research conducted in this work intends to assess the performance of nonlinear control strategies to stabilize the attitude of a X-Vert VTOL aircraft when hovering, comparing existing solutions to applications of Nonlinear Dynamics Inversion (NDI) and its incremental version, INDI. Such controllers are implemented and tuned in simulation in order to stabilize a model of the tail-sitter , complemented by estimation methods that allow to feed back the necessary variables. These estimators and controllers are then implemented in a microcontroller, validating them in a Hardware-in-the-Loop (HITL) scenario, with simple maneuvers in vertical flight. Lastly, the developed control solutions are used to stabilize the aircraft in experimental flight, being monitored by a motion capture system. The experimental results allow to validate the model of the X-Vert and compare the effectiveness of the different control solutions in stabilizing it, with the INDI presenting itself as a more robust control strategy, with better tracking capabilities and less actuator demands.

Incremental control strategies provide undeniable advantages for controlling Uncrewed Aerial Vehicles (UAVs) due to their reduced model dependency and accurate tracking capacities. This is of particular relevance for hybrid UAVs, specially for tail-sitters, which perform complex manoeuvres when transitioning to and from aerodynamic flight. This paper summarizes the research undertaken in the application of the Incremental Nonlinear Dynamics Inversion (INDI) and Incremental Backstepping (IBKS) to a small tail-sitter UAV. After the application of these control strategies in a simulated scenario, the implementation in a Micro-Controller Unit was validated in a Hardware-in-the-Loop scenario. Following such validation, indoor experimental trials were undertaken in order to evaluate the capacity of these controllers to stabilize and control the real aircraft. The stabilization in the flight trials was successfully implemented and allow to conclude that both INDI and IBKS are control strategies suited to control a tail-sitter in vertical flight, providing accurate tracking capabilities under smooth actuation. Furthermore, it was found that the IBKS is significantly more computationally demanding than the INDI, although having a global proof of stability that is of interest in aircraft control.

Living beings are composite thermodynamic systems in non-equilibrium conditions. Within this context, there are a number of thermodynamic potential differences (forces) between them and the surroundings, as well as internally. These forces lead to flows, which, ultimately, are essential to life itself. Living beings are under the pressures of natural selection, thus are biological flows as well. At the same time, the maintenance of homeostatic conditions, the tenet of physiology, demands regulation of these flows by control of variables. However, due to the very nature of these systems, regulation of flows and control of variables become entangled in closed loops. Therefore, the search for adaptation in flows takes a different path than the search for adaptation in morphological traits. Being at the roots of transfer processes, thermodynamic criteria turn out to be as natural physical candidates. Likewise, being at the roots of physiology, control turns out to be as a natural biological candidate in that path. Here we show how to combine entropy generation, with respect to a generalized process, and control of parameters (in such a generalized process) in order to create a criterium of optimal ways to regulate changes in generalized flows.

Gold nanoclusters (AuNCs) with fluorescence in the Near Infrared (NIR) by both one- and two-photon electronic excitation were incorporated in mesoporous silica nanoparticles (MSNs) using a novel one-pot synthesis procedure where the condensation polymerization of alkoxysilane monomers in the presence of the AuNCs and a surfactant produce hybrid MSNs of 49 nm diameter. This method was further developed to prepare 30 nm diameter nanocomposite particles with simultaneous NIR fluorescence and superparamagnetic properties, with a core composed of superparamagnetic manganese ferrite nanoparticles (MnFe2O4) coated with a thin silica layer, and a shell of mesoporous silica decorated with AuNCs. The nanocomposite particles feature NIR-photoluminescence with 0.6% quantum yield and large Stokes shift (290 nm), and superparamagnetic response at 300 K, with a saturation magnetization of 13.4 emu g-1. The conjugation of NIR photoluminescence and superparamagnetic properties in the biocompatible nanocomposite has high potential for application in multimodal bioimaging.

The integration of bacteriophages, a particular class of viruses that specifically infect bacteria and archaea, in biosensors for the monitoring of pathogens in foods and beverages is highly desirable. To this end, an increasing focus has been set on the exploration of covalent and physical methods for the immobilization of phages on solid surfaces. This work investigates the electrostatic assembly of tailed phages, specifically anti-Listeria monocytogenes P100 phages, on an ultrathin self-assembled monolayer (SAM) of 11-amino-1-undecanethiol (AUT). The cationic properties of AUT may allow for the electrostatic capture of P100 in a capsid-down fashion, thus, exposing the specific receptor-binding proteins on their tails to the corresponding pathogens in analytical samples. The physical properties of immobilized phages have been studied using AFM, SEM, and electrochemical techniques, providing insight into the orientation of the phages and revealing that the pH plays a remarkable role in the morphology and charge transfer behavior of the adsorbed films. Overall, this research portrays SAMs of amino-akylthiols as a valid platform for the oriented immobilization of bacteriophages on surfaces for electroanalytical purposes.

The transport sector is pivotal and indispensable in our daily existence, being the exclusive conduit for the intercontinental conveyance of commodities and individuals. Hence, comprehending the phenomenon of business failure within the transport industry assumes paramount significance in delineating an effective competitive policy for this sector. The primary objective of this research paper is to execute a comparative investigation between statistical models forecasting business failure and models founded on artificial intelligence, within the context of the transport sector. This analysis spans the temporal expanse from 2014 to 2021 and encompasses the nations of Portugal, Spain, France, and Italy, aiming to ascertain superior efficacy among these models. The dataset employed for this endeavor encompassed a final cohort of 4866 companies, comprising 2881 that endured as going concerns and 1985 that succumbed to business failure. The models developed for this study exhibited the capacity to accurately categorize a proportion of companies ranging from 71% to 73%. Nonetheless, upon comparative scrutiny of these outcomes with those derived from the statistical models dedicated to business failure prediction, it becomes evident that the latter demonstrate an enhanced predictive prowess, manifesting fewer errors in the classification of the scrutinized companies.

The effects of the solvent used for the active layer materials of an OLED based on TADF emitters plays a fundamental role in solution-deposited devices. This work focuses the effects on the performance of different solvents employed to fabricate a very simple two organic layer OLED based on a green TADF emitter, under the concept of host:guest matrix. From the different results of the main figures of merit, it was possible to conclude that the OLED that used toluene as solvent for the active layer reached a maximum EQE of 14%, almost the maximum already obtained for this emitter in more complex device structures. With the analysis of the charge transport processes, it was possible to establish an explanatory model for the obtained results. Through impedance spectroscopy, additional characterization about the nature of charge transport processes was carried out. With these results, it was possible to corelate the relaxation times, with the electrical properties of the active layer, and infer about the interaction between the electrical charges and the defect levels opening new possibilities to further development in the printed OLEDs.

In plant cells the conventional route to the vacuole involves the endoplasmic reticulum, the Golgi and the prevacuolar compartment. However, over the years, unconventional sorting to the vacuole, bypassing the Golgi, has been described, which is the case of the Plant Specific Insert (PSI) of the aspartic proteinase cardosin A. Interestingly, this Golgi-bypass ability is not a characteristic shared by all PSIs, since two related PSIs showed to have different sensitivity to ER-to-Golgi blockage. Given the high sequence similarity between the PSIs domains, we sought to depict the differences in terms of post-translational modifications. In fact, one feature that draws our attention is that one is N-glycosylated and the other one is not. Using site-directed mutagenesis to obtain mutated versions of the two PSIs, with and without the glycosylation motif, we observed that altering the glycosylation pattern interferes with the trafficking of the protein as the non-glycosylated PSI-B, unlike its native glycosylated form, is able to bypass ER-to-Golgi blockage and accumulate in the vacuole. This is also true when the PSI domain is analyzed in the context of the full-length cardosin. Regardless of opening exciting research gaps, the results obtained so far need a more comprehensive study of the mechanisms behind this unconventional direct sorting to the vacuole.

Mycobacterium tuberculosis (Mtb) the causative agent of human tuberculosis (TB) is one of the most successfully adapted-human pathogens. Human-to-human transmission occurs at high rates through aerosols containing bacteria, but the pathogen evolved prior to the establishment of crowded populations. Mtb has developed a particular strategy to ensure persistence in the host until an opportunity for transmission arise. It has refined its lifestyle to obviate the need for virulence factors such as capsules, flagella, pilli, or toxins to circumvent mucosal barriers. Instead, the pathogen uses host macrophages, where it establishes intracellular niches, for its migration into the lung parenchyma and other tissues and for the induction of long-lived latency in granulomas. Finally, at the end of the infection cycle Mtb induces necrotic cell death of macrophages to escape to extracellular milieu and instructs a strong inflammatory response required for progression from latency to disease and transmission. Common to all these events is ESAT-6, one of the major virulence factors secreted by the pathogen. This review highlights the recent advances in understanding the role of ESAT-6 in hijacking macrophage function to establish a successful infection and transmission and its use as a target for the development of diagnostic tools, and vaccines.

In the present study, a numerical model was developed to predict the flow pattern inside a broiler building. The model intends to predict the velocities fields inside the domain and ammonia (NH3) emitted or released by litter from poultry housing. The numerical model developed in Computational Fluid Dynamics (CFD) commercial code, intends to represent a commercial broiler building, and intends to simulate the 3D and heat transfer, in steady state flow. The evaporative cooling pads were also included in the model. The validation of the model was based in experimental measurements obtained in previous studies. The simulations were focused on Summer, Winter and also Mid-Season situation. The numerical results of NH3 concentration were compared with the experimental measurements, and a quite good agreement was verified. The numerical results allowed the characterization of: the inside flow pattern developed for the summer and winter situation; the inside NH3 distribution, and the velocity field distribution inside the broiler building. It was found that NH3 concentration increases along the tunnel, especially in low flow rate imposed from the exhaust fan. Also, it was verified that the low velocities inside domain are no sufficient to remove the gaseous pollutants.

The need to develop novel lightweight materials and their manufacturing processes is sets out to meet the new aerospace, automotive and construction requirements. Within this context, this research work is proposed to develop a novel thermoplastic composite material with high mechanical properties. These composites will be based on thermoplastic matrixes made from polyamide and 35% short glass fiber filled-polyamide reinforced with different types of fabrics. As reinforcement, glass fiber fabrics will be used as the base. They will be treated with different processes, both chemical and physical, to promote adherence to the matrix. Textile overmoulding technology was selected for manufacturing these composites. This technology was primarily developed to manufacture aesthetic lined components and has achieved a great implantation. Once these new composites are manufactured, they will be submitted to different tests to evaluate their behavior regarding adhesion, impact strength and stiffness. It is expected an improvement on stiffness and impact absorption.

Lupinus mutabilis, also known as tarwi or chocho, is an important agricultural species cultivated in South America since ancient times. Tarwi is native from the Andean regions of Peru, Bolivia, and Ecuador and has a very high protein content. Despite its high nutritional value and promotion efforts by regional researchers and breeders, tarwi is not a widely cultivated crop in its center of origin. In this review, we present the work carried out by public breeding programs of L. mutabilis at national agricultural research institutes, universities, and other institutions in Ecuador, Peru, and Bolivia. The main breeding method used in the Andes to improve local landraces has been mass selection to adapt lines to specific environments. At least 25 cultivars or ecotypes have been selected and released over the last 40 years using this breeding system. Notwithstanding, breeders are currently struggling to develop new varieties that are high yielding, suitable for mechanized harvesting, have a low content of alkaloids or other anti-nutritional properties, and to anthracnose (Colletotrichum acutatum). Therefore, it is necessary to reassess the potential of this crop and invest in its research to incorporate new techniques and breeding strategies to optimize the development of new varieties in the Andes which address the current cultivation challenges of the species.

Background: Human papillomavirus (HPV) is diagnosed in most cervical cancers and is the fourth cause of cancer worldwide. Currently, fourteen HPV types are considered carcinogenic (HPV 16/18/31/33/35/39/45/51/52/56/58/59/66/68) with different oncogenicity. Cervical lesions might be due to HR (high risk)-HPV for what is important to identify new methods to genotype cervical lesions. The main goal was to identify, for the first time, HPV-HR in cervical lesions using Anyplex™ Detection kit in paraffin-embedded tissue. (2) Methods: It was performed a retrospective study in 45 women from Academic Hospital of Cova da Beira (CHUCB). DNA extraction was performed and through Anyplex™ II HPV-HR Detection kit HPV-HR were genotyped. (3) Results: HPV-HR were identified in 38 women; HPV-16 (55,26%), HPV-18/39/56/58/59 (5,26%), HPV-31 (21,05%), HPV-35 (7,89%), HPV-51/6 (2,63%) and HPV-52 (10,53%). (4) Conclusions: Our results reflect that Anyplex™ II HPV-HR Detection kit, designed for HR-HPV genotyping of cervical cancer screening, might be properly used to HR-HPV genotyping in histology. The proposed methodology allows an easy and cheaper technique that should be used as a future cervical risk stratification. It is a strong tool to be implemented in clinical practice in order to detect HR-HPV detection in cervical lesions, contributing to a more accurate diagnosis.

Sustainable biomass production has significant potential for mitigating greenhouse gas emissions and is a promising alternative for the production of eco-friendly biofuels, biochemicals, and carbonaceous materials for biological, energetic, and environmental applications. Biomass from agroforestry and agricultural wastes is the richest natural carbon source and a sustainable option for woody biomass from a circular economic perspective. Portugal has several residues and by-products of agriculture, food processing, and forestry origin, and has a high availability of residual biomass. Portugal intends to reduce its dependence on energy imports and the use of fossil fuels, thereby increasing its economic performance while using biomass waste to produce high-value-added products. In this context, this review aims to explore the potential of agri-food wastes obtained from Portuguese industries via thermochemical conversion technologies as a promising sustainable alternative to woody biomass for the development of eco-friendly biofuels, biochemicals, and high-value carbonaceous materials and their applications. This strategy based on the circular bioeconomy concept can contribute to reducing the dependence on fossil fuels and minimising greenhouse gas emissions while meeting the demands of the growing population and providing a sustainable waste management solution.

Improving antigen presentation is crucial for the success of immunization strategies. Yeasts are classically used as biofactories to produce recombinant proteins and are efficient vehicles for the delivery of vaccine antigens, besides present adjuvants properties. Despite the absence of epidemic outbreaks, several vaccine approaches continue to be developed for Zika virus infection. These prophylactic strategies are fundamental given the severity of clinical manifestations, mainly due to viral neurotropism. The present study aimed to evaluate in vivo the immune response induced by P. pastoris recombinant strains displaying epitopes of the Envelope (ENV) and NS1 ZIKV proteins. Intramuscular immunization with heat-attenuated yeast enhanced the secretion of IL-6, TNF-α, and IFN-γ, besides activation of CD4+ and CD8+ T cells, in BALB/c mice. P. pastoris displaying ENV epitopes induced a more robust immune response, increasing immunoglobulin production, especially IgG isotypes. Both proposed vaccines showed the potential to induce immune responses without adverse effects, confirming the safety of administering P. pastoris as a vaccine vehicle. Here we demonstrated, for the first time, the evaluation of a vaccine against ZIKV based on a multiepitope construct, using yeast as a vehicle, reinforcing the applicability of P. pastoris as a whole yeast cell vaccine.

Cardiovascular disease is the most common cause of death. Oxidative stress and inflammation are pathophysiological processes involved in the development of cardiovascular diseases, so anti-inflammatory and antioxidant agents that modulate redox balance have become the targets of research to evaluate their molecular mechanisms and therapeutic properties. Astaxanthin, a carotenoid of the xanthophyll group, has potent antioxidant effects due to its molecular structure and its arrangement in the plasma membrane, factors that favor the neutralization of reactive oxygen and nitrogen species. This carotenoid also stands out for its anti-inflammatory activity, possibly interrelated with its antioxidant effect, as well as for its modulation of lipid and glucose metabolism. Considering the potential positive effects of astaxanthin on cardiovascular health evidenced by preclinical and clinical studies, this paper describes the molecular and cellular mechanisms related to the antioxidant and anti-inflammatory properties of this carotenoid in cardiovascular diseases, especially atherosclerosis.

The eugenol derivative, ethyl 4-(2-methoxy-4-(oxiran-2-ylmethyl)phenoxy)butanoate 1, with promising insecticidal capability was encapsulated in liposomal formulations of egg-phosphatidylcholine/cholesterol (Egg-PC:Ch) 70:30 and of 100% dioleoylphosphatidylglycerol (DOPG). Compound-loaded Egg-PC:Ch liposomes exhibit small hydrodynamic diameters (below 100 nm), high encapsulation efficiency (88.8% ± 2.7%), higher stability and a more efficient compound release, being chosen for assays in Sf9 insect cells. Compound 1 elicited a loss of cell viability up to 80% after 72h of incubation. Relevantly, encapsulation maintained the toxicity of compound 1 towards insect cells, while it lowered toxicity towards human cells, thus showing the selectivity of the system. Structure based inverted virtual screening was used to predict the most likely targets and molecular dynamics simulations and free energy calculations were used to demonstrate that this molecule can form a stable complex with insect odorant binding proteins and/or acetylcholinesterase.

Dietary protein quality plays a key role in maintaining intestinal mucosal integrity, but also modulates the growth of luminal microorganisms. This work assessed the effect of dietary protein sources on the performance, gut morphology, and microbiome in Nile tilapia. Four isonitrogenous and isolipidic diets comprising equivalent amounts of the protein supply derived from either PLANT, ANIMAL, INSECT, or MICROBIAL (bacterial biomass) sources were fed to triplicate groups of fish (IBW: 12 g) during 46 days. Fish fed ANIMAL and MICROBIAL diets showed significantly higher growth than those fed the PLANT and INSECT diets (P < 0.05). Relative abundance at the phylum level shows Bacteroidetes, Fusobacteria and Proteobacteria as more abundant phyla in tilapia’s intestine, while Cetobacterium is the most representative genera in all treatments. Interesting patterns were observed in the correlation between amino acid intake and genus and species abundance. Metabolism prediction analysis showed that microbial amine and polyamine degradation pathways are modulated depending on diets. In conclusion, different protein sources interfere directly with the cross-talk of bacteria pathways and amino acid intake.

The endomembrane system in plant cells enables the cell to manage and coordinate a variety of membranous compartments so that they and their contents arrive at the right location. The secretory pathway takes part in this complex network and has its gateway at the Endoplasmic Reticulum. Therefore, alterations at the Endoplasmic reticulum level could condition how protein trafficking takes place or, at least, influence how such cargo leaves this organelle. With this work, we intended to assess how abnormalities at the Endoplasmic Reticulum would interfere with protein sorting and trafficking. Thus, we used a novel Arabidopsis mutant - leb-2 GFP-h -, presenting ER morphology alterations. Our results show that alterations in the leb-2 GFP-h mutant did not disrupt PSI A/B–mCherry transport to the vacuole but influences the expression of endogenous aspartic proteinases. Furthermore, the study of key-endomembrane genes expression revealed an upregulation of the SNAREs AtVAMP722 and AtVAMP723. As a whole, the leb-2 mutant seems not to interfere with vacuolar routes but may be implicated in secretion events.

The disastrous 2017 fire season in Portugal lead to widespread recognition of the need for a paradigm shift in forest and fire management. We focused our study on Alvares, a parish in central Portugal which had 60% of its area burned in 2017, with a large record of historical. We evaluated how different fuel treatment strategies can reduce wildfire hazard in Alvares, through i) a fuel break network with different priorities and ii) random fuel treatments resulting from stand-level management intensification. To assess this, we developed a stochastic fire simulation system (FUNC-SIM) that integrates uncertainties in fuel distribution over the landscape. If the landscape remains unchanged, Alvares will have large burn probabilities in the north, northeast, and center-east areas of the parish that are very often associated with high fire line intensities. The different fuel treatment scenarios decreased burned area between 12.1-31.2%, resulting from 1%-4.6% increases in annual treatment area, and reduced 10%-40% the likelihood of wildfires larger than 5000 ha. On average, simulated burned area decreased 0.22% per each ha treated, and effectiveness decreased with increasing area treated. Overall, both fuel treatment strategies effectively reduced wildfire hazard and should be part of a larger, holistic and integrated plan to reduce the vulnerability of the Alvares parish to wildfires.

Piperine, an active plant alkaloid from black pepper (Piper nigrum), has several pharmacological effects: antioxidant, anti-inflammatory and immunomodulatory, which involves inhibiting molec-ular events associated with various stages of cancer development. The aim of this study was to investigate the molecular mechanisms of action of piperine in relation to its potential anticancer effect on head and neck cancer cells. Parameters related to neoplastic potential, analysis of cyto-kine, protein and gene expression were investigated in the head and neck cancer cell lines (HEp-2 and SCC-25) treated with piperine. The results of the tests indicated that piperine modified mor-phology, inhibited viability and the formation of cell colonies. Piperine promoted genotoxicity by triggering apoptosis and cell cycle arrest in G2/M and S. A decrease in cell migration was also observed, and decreased expression of MMP2/9 genes. Piperine also reduced the expression of inflammatory molecules (PTGS2 and PTGER4), regulated the secretion of cytokines (IF-y and IL-8) and modulated the expression of ERK and p38. These results suggest that piperine exerts anti-cancer effects on tumor cells, and could be a promising natural treatment by regulating signaling pathways associated with head and neck cancer.

The coronavirus disease 2019 (COVID-19) pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) challenges include understanding what triggered SARS-CoV-2 emergence, how this RNA virus is evolving or how the genomic variability may impact the primary structure of proteins that are targets for vaccine. We analyzed 19471 SARS-CoV-2 genomes and 199,984 spike glycoprotein sequences available at the GISAID database from all over the world and 3335 genomes of other Coronoviridae family members available at Genbank, collecting SARS-CoV-2 high-quality genomes and distinct Coronoviridae family genomes. Here, we identify a SARS-CoV-2 emerging cluster containing 13 closely related genomes isolated from bat and pangolin that showed evidence of recombination, which may have contributed to the emergence of SARS-CoV-2. The analyzed SARS-CoV-2 genomes presented 9632 single nucleotide polymorphisms (SNPs) corresponding to a variant density of 0.3 over the genome, and a clear geographic distribution. SNPs are unevenly distributed throughout the genome and hotspots for mutations were found for the spike gene and ORF 1ab. We describe a set of predicted spike protein epitopes whose variability is negligible. All predicted epitopes for the structural E, M and N proteins are highly conserved. This result favors the continuous efficacy of the available vaccines.

The move towards a new Circular Economy (CE) economic model has been advocated and supported in Portugal, however, there is limited research on this topic. To address this gap, a quantitative research based on an online survey was carried out among 99 Portuguese organizations, encompassing a wide range of sectors and sizes. The results show that CE is regarded as a strategic and relevant issue for profitability and value creation. Furthermore, the perception that it requires the adoption of new business models in addition to the classical “reduce, reuse, and recycle” approach is growing. Moreover, based on the hypotheses raised, results suggest that the level of CE adoption is positively impacted by the status of the EMS (Environmental Management System) certification and the willingness to improve the environmental performance and achieve a sustainable business model. However, CE activities are still relatively modest and a friendlier context (fiscal, legal, organizational, etc.) and the stronger support from supply chain agents and consumers are required. Future research should focus on how to design and shape the transition from a linear to a CE economy, and to ascertain if the positive attitude towards CE is materialized in changing the way business is done.

Breast cancer represents the most common neoplasm worldwide. Viral infections are involved with carcinogenesis, especially those caused by oncogenic Human Papillomavirus (HPV) genotypes. The relationship between HPV and various types of cancer, such as breast and lung, still requires further studies. After infection with HPV, there is a remodeling of the tumor microenvironment, providing a post-infection alteration with immunosuppressive characteristics. This study evaluated the role of HPV in breast adenocarcinoma cell lineage (MDA-MB-231), transfected with the HPV16 E5, E6, and E7 oncogenes and co-cultured with PBMCs. Immunophenotyping was performed. There was an increase in CD4+ T cells number when compared with non-transfected and transfected MDA-MB-231, especially the Treg profile. Moreover, proinflammatory intracellular cytokines, such as IFN-γ, TNF-α, and IL-17 were impaired by transfected cells and a decrease in the cytolytic ac-tivity of the CD8+ and CD56+ lymphocytes was also observed in the presence of HPV oncogenes, mainly with E6 and E7 in NK and TCD8+ cells. In conclusion, MDA-MB-231 breast cell lineage transfected with HPV oncogenes can downregulate the number and function of lymphocytes and monocytes.

Chiroptical responses have been an essential tool over the last decades for chemical structural elucidation due to their exceptional sensitivity to geometry and intermolecular interactions. In recent times, there has been an increasing interest for the search of more efficient sensing by the rational design of tailored chiroptical systems. In this Review article, advances on chiroptical systems towards their implementation in sensing applications are summarized. Strategies to generate chiroptical responses are illustrated. Theoretical approaches to assist in the design of these systems are discussed. Development of efficient chiroptical reporters in different states of matter, essential for the implementation in sensing devises, is reviewed. In the last part, remarkable examples of chiroptical sensing applications are highlighted.

This work offers a new log generalized odd log-logistic exponential regression model for analyzing weekly dengue fever cases in 2022 with a location-systematic component. To achieve this, a data set of 49 observations of dengue fever cases in the Federal District of Brazil is employed. A review of the mathematical properties of the generalized odd log-logistic exponential distribution is provided, the maximum likelihood method is used to estimate the parameters, and, through Monte Carlo simulations, the accuracy of the estimators is investigated. The model's fit is assessed using global influence metrics and residual analysis. For the time scenario studied, the proposed regression identified factors that have an impact on dengue fever cases, which may contribute to improve disease control. Finally, several interpretations are addressed, and a discussion presents results that aid in better understanding the data set and future research on different data.

Background: We aimed to assess the association between DII and PD and the mediation effect of DII in the association of PD with systemic inflammation. Using the National Health and Nutrition Examination Survey (NHANES) 2009-2010, 2011-2012 and 2013-2014, participants that received periodontal exam and provided dietary recall data were included. The inflammatory potential of diet was calculated via DII. Periodontitis was defined according to the 2012 case definition. The clinical outcomes of interest were mean periodontal probing (PPD), mean clinical attachment loss (CAL) and thresholds of PPD and CAL. White blood cells (WBC), segmented neutrophils and C-reactive protein (CRP) were used as proxies for systemic inflammation. The periodontal measures were regressed across DII values using adjusted multivariate linear regression. Adjusted mediation analysis appraised the influence of DII in the association of periodontitis and systemic inflammation. 10,178 participants were included. DII was significantly correlated with mean PPD, mean CAL, thresholds of PPD and CAL, WBC, segmented neutrophils and DII (p&lt;0.01). A linear regression logistic adjusted for multiple confounding variables confirmed the association between DII and mean PPD (B = 0.02, Standard Error [SE]: 0.02, p&lt;0.001) and CAL (B = -0.02, SE: 0.01, p&lt;0.001). The association of mean PPD and mean CAL with both white blood cells and segmented neutrophils were mediated by DII (from 2.1 to 3.5%, p&lt;0.001). In the 2009-2010 subset, the association of mean CAL with serum CRP was mediated by DII (52.0%, p&lt;0.01). In conclusion, inflammatory diet and PD may be associated. Also, the inflammatory diet significantly mediated the association of leukocyte counts and systemic inflammation with periodontitis.

Urban dust samples were taken from the playgrounds of 27 schools located in the urban area of the city of Murcia (S.E. Spain). Their color and degree of magnetism were determined, as well as their heavy metal content (Cd, Cu, Cr, Ni, Pb and Zn) to evaluate contamination by environmental and health indexes. The highest concentration of contaminants is found in dusts of dark color and medium and high magnetism. The concentrations of heavy metals in the dust were, in this order, Zn (453.74 mg kg-1)> Cu (77.44 mg kg-1)> Cr (67.93 mg kg-1)> Pb (55.72 mg kg-1)> Ni (18.56 mg kg-1)> Cd (0.42 mg kg-1). The analysis of the magnetic and non-magnetic fraction indicates that there is a concentration of all heavy metals in the magnetic fraction. According to the geoenvironmental indices used, the ecological risk presented by school playgrounds is moderate. As for the health indices, ingestion was the main route of exposure and entry of dust particles into the body, being the main health risk for adults and children for all metals. The Hazard Index (HI) values for all elements for both adults and children were less than 1, indicating that there is no risk of developing adverse health effects. As for the Cancer Risk (CR), the values of this index indicate that there is no risk. The objective of this study was to evaluate pollution in the playgrounds of schools in the city of Murcia.

Background: Muscle wasting is a common phenomenon in oncology and appears to be alleviated by exercise training. This study aims to determine the degree of aggressiveness of cancer-induced muscle wasting in two different phenotypic muscles, and whether exercise training can attenuate this muscle dysfunction. Methods: Fifty Sprague-Dawley rats were randomly assigned to four experimental groups, two control groups (sedentary and exercised) and two breast cancer model groups (sedentary and exercised) induced by 1-methyl-1-nitrosoureia (MNU). After 35 weeks of endurance training the animals were sacrificed and the gastrocnemius and soleus muscles were harvested for morphometric analysis. Results: A significant reduction in cross-sectional area (P < 0.05) was found in both muscles of sedentary tumor-bearing animals. Interstitial fibrosis was significantly higher in the gastrocnemius of sedentary tumor-bearing animals (P < 0.05), but not in the soleus. A shift from large to small fibers was observed in the gastrocnemius of sedentary tumor-bearing animals. Long-term exercise training was able to prevent this cancer-related mus-cle dysfunction. Conclusions: The Gastrocnemius muscle showed a very pronounced reduction in cross-sectional area and marked interstitial fibrosis in sedentary animals with tumors. The soleus muscle showed a less pronounced but significant reduction in cross-sectional area, and collagen deposition did not differ between tumor groups. These contrasting results confirm that can-cer-induced muscle wasting can affect specific fiber types, and specific muscles, namely fast glycolytic muscles, and that exercise training can act to improve it.

This work aims to investigate systematically the tecno-economic feasibility of ther-mos-catalytic cracking process for two solid waste materials, a lipid-base material (re-sidual fat/scum from retention box of the University Restaurant of UFPA) and a lig-nin-cellulosic material Açaí seed (Euterpe oleracea. Mart). The thermo-catalytic process-es were carried out in pilot scale (THERMTEK/LEQ/UFPA/IME/RJ), and their economic feasibility analyzed. The yields of biofuels produced by fractional distillation were al-so studied. The physicochemical characteristics of the raw materials, the organic liquid product (bio-oil) and the chemical composition of kerosene, light-diesel and heavy-diesel from the lipid-base material, as well as those of kerosene and light-diesel from the Açaí seed were also determined. The economic indicators for the evaluation of the most viable cracking (pyrolysis) and distillation process of bio-oils were: a) the sim-ple payback criterion, b) discounted payback, c) net present value (NPV), d) internal rate of return (IRR), and e) index of profitability (IP). The analysis of the indicators showed the economic viability of crude palm oil (Elaeis guineensis, Jacq) and unfeasibil-ity for the palm oil neutralization. The minimum fuel selling price (MFSP) obtained is this work for the biofuels was of 1.34 US$/L) and the breakeven point obtained was of 1.28 US$/L. The sensibility analysis demonstrated that the pyrolysis and distillation yields are the most important variables to affect the minimum fuel selling price (MFSP).

This work aims to investigate the effect of process temperature and catalyst content by pyrolysis and thermal catalytic cracking of (organic matter + paper) fraction from municipal household solid waste (MHSW) on the yields of reaction products (bio-oil, bio-char, H2O, and gas), acid value and chemical composition of bio-oils, and characterization of bio-chars, in laboratory scale. The collecting sectors of MHSW in the municipality of Belém-Pará-Brazil were chosen based on geographic and socio-economic database. The MHSW collected and transported to the segregation area. The gravimetric analysis of MHSW carried out and the fractions (Paper, Cardboard, Tetra Pack, Hard Plastic, Soft Plastic, Metal, Glass, Organic Matter, and Inert) separated. The selected organic matter and paper submitted to pre-treatment of crushing, drying, and sieving. The experiments carried out at 400, 450, and 475 °C and 1.0 atmosphere, and at 475 °C and 1.0 atmosphere, using 5.0, 10.0, and 15.0% (wt.) Ca(OH)2, in batch mode. The bio-oil characterized for acid value. The chemical functions present in bio-oil identified by FT-IR and the composition by GC-MS. The bio-char characterized by SEM, FT-IR and XRD. The variance in mass (wt.%) for organic fraction of municipal household solid waste, between 56.21 and 67.45% (wt.), lies with the interval of 56% (wt.) and 64% (wt.) of OFMHSW for middle and low income countries. The pyrolysis of MHSW fraction (organic matter + paper) show bio-oil yields between 2.63 and 9.41% (wt.), aqueous phase yields between 28.58 and 35.08% (wt.), solid phase yields between 35.29 and 45.75% (wt.), and gas yields between 16.54 and 26.72% (wt.). The bio-oil yield increases with pyrolysis temperature. For the catalytic cracking, the bio-oil and gas yields increase slightly with CaO content, while that of bio-char decreases, and the H2O phase remains constant. The GC-MS of liquid reaction products identified the presence of hydrocarbons (alkanes, alkenes, alkynes, cycloalkanes, and aromatics) and oxygenates (carboxylic acids, ketones, esters, alcohols, phenols, and aldehydes), as well as compounds containing nitrogen, including amides and amines. The acidity of bio-oil decreases with increasing process temperature and with aid Ca(OH)2 as catalyst. The concentration of hydrocarbons in bio-oil increases with increasing Ca(OH)2-to-MHSW fraction ratio due to the catalytic deoxygenation of fatty acids molecules, by means of de-carboxylation/de-carbonylation, producing aliphatic and aromatic hydrocarbons.

Accurate streamflow forecasting is crucial for effectively managing water resources, particularly in countries like Colombia, where hydroelectric power generation significantly contributes to the national energy grid. Although highly interpretable, traditional deterministic, physically-driven models often suffer from complexity and require extensive parameterization. Data-driven models like Linear Autoregressive (LAR) and Long Short-Term Memory (LSTM) networks offer simplicity and performance but cannot quantify uncertainty. This work introduces Sparse Variational Gaussian Processes (SVGPs) for forecasting streamflow contributions. The proposed SVGP model reduces computational complexity compared to traditional Gaussian Processes, making it highly scalable for large datasets. The methodology employs optimal hyperparameters and shared inducing points to capture short-term and long-term relationships among reservoirs. Training, validation, and analysis of the proposed approach consider the streamflow dataset from 23 geographically dispersed reservoirs recorded during twelve years in Colombia. Performance assessment reveals that the proposal outperforms baseline Linear Autoregressive (LAR) and Long Short-Term Memory (LSTM) models in three key aspects: adaptability to changing dynamics, provision of informative confidence intervals through Bayesian inference, and enhanced forecasting accuracy. Therefore, the SVGP-based forecasting methodology offers a scalable and interpretable solution for multi-output streamflow forecasting, thereby contributing to more effective water resource management and hydroelectric planning.

It has been demonstrated that brief cycles of ischemia followed by reperfusion (IR) applied before exercise can improve performance and, IR intervention, applied immediately after exercise (post-exercise ischemic conditioning – PEIC) exerts a potential ergogenic effect to accelerate recovery. Thus, the purpose of this systematic review with meta-analysis was to identify the effects of PEIC on exercise performance, recovery and the responses of associated physiological parameters, such as creatine kinase, perceived recovery and muscle soreness, over 24 h after its application. From 3281 studies, six involving 106 subjects fulfilled the inclusion criteria. Compared to sham (cuff administration with low pressure) and control interventions (no cuff administration), PEIC led to faster performance recovery (p=0.004; ES=-0.49) and lower increase in creatine kinase (p&lt;0.001; ES=-0.71) and muscle soreness (p&lt;0.001; ES=-0.89) over 24 h. The effectiveness of this intervention is more pronounced in subjects with low/moderate fitness level and at least a total time of 10 min of ischemia (e.g. 2 cycles of 5 min) is necessary to promote positive effects.

This article aimed to evaluate, using statistical tools, the generation and composition of urban solid waste (MSW) in the city of Belém, Pará, from nine urban collection sectors in the municipality, and the average nominal income of the population. Approximately 900kg of urban solid waste were col-lected from the municipality in the period from 2021 to 2022. Statistical tests were carried out on hypotheses with 5% significance in comparative evaluations, and their respective average nominal incomes. The results indicated that the organic fraction corresponds to 55.57% of the waste generated in the municipality, 14.26% is inert waste (potentially contaminating) and 0.67% is miscellaneous waste. It was observed that the waste generated by families with high purchasing power tends to contain higher percentages of recyclables, while in families with lower purchasing power the highest percentages tend to be organic. Knowledge of the generation of MSW is fundamental for the choice and dimensioning of operations and processes involved in the management chain at the municipal level. The decentralization of services offered based on solid waste management would enable greater success in serving the population.

The exponential growth in the consumption of electronics, in combination with the reduction in their useful life, leads to a significant increase in the volume of electronic material discarded. Printed Circuit Boards (PCBs) are modules composed of ceramic, polymer and metallic materials of high economic value and with a great potential for damage to biotic and anthropic environments when inadequately discarded. The aims of this work was to study the main environmental impacts and the efficiency of mechanical operations in the electronic waste recycling process in optimizing the concentration of metallic copper. For this, the samples obtained were characterized according to their morphology and chemical composition, and subjected to physical and mechanical treatments: dismantling, grinding, separation by granulometry, density and magnetic property. The environment impacts were estimated by the Life Cycle Assessment of the pre-treatment processes, associated with copper extraction operations in WPCBs. According to the results obtained, it is possible to infer that the NM +1mm Concentrated product presents in its metallic composition around 78% of copper, which contributes to the efficiency of the hydrometallurgical extraction processes. It is noteworthy that the Concentrated class represents about 14% of copper (wt) taking into account the amount of 3.789 kg of PCB waste input material. The potential for reinsertion of the dust in the material recovery process is highlighted, given that the chemical composition of this particulate has a significant presence of metals. In general, it was found that due to the higher concentration (wt %) of the sample being allocated in the range of - 0.15mm + 0.05mm, the elements Fe (18.30%), Si (10.73%), Ca (9.21%) and Cu (8.89%) stand out regarding the participation of the elemental composition of this fraction and also regarding the general composition of the sample. Furthermore, the generation of dust during the fragmentation process, can be associated with occupational respiratory diseases when not managed. About the Life Cycle Assessment, in seven of the nine categories evaluated, crushing and screening activities accounted for more than 90% of the recorded impact values. In general, it is estimated that in the pre-treatment phase be generated 15.4 kg CO2 eq.

This work aims to investigate systematically the tecno-economic feasibility of ther-mos-catalytic cracking process for two solid waste materials, a lipid-base material (re-sidual fat/scum from retention box of the University Restaurant of UFPA) and a lig-nin-cellulosic material Açaí seed (Euterpe oleracea. Mart). The thermo-catalytic process-es were carried out in pilot scale (THERMTEK/LEQ/UFPA/IME/RJ), and their economic feasibility analyzed. The yields of biofuels produced by fractional distillation were al-so studied. The physicochemical characteristics of the raw materials, the organic liquid product (bio-oil) and the chemical composition of kerosene, light-diesel and heavy-diesel from the lipid-base material, as well as those of kerosene and light-diesel from the Açaí seed were also determined. The economic indicators for the evaluation of the most viable cracking (pyrolysis) and distillation process of bio-oils were: a) the sim-ple payback criterion, b) discounted payback, c) net present value (NPV), d) internal rate of return (IRR), and e) index of profitability (IP). The analysis of the indicators showed the economic viability of crude palm oil (Elaeis guineensis, Jacq) and unfeasibil-ity for the palm oil neutralization. The minimum fuel selling price (MFSP) obtained is this work for the biofuels was of 1.34 US$/L) and the breakeven point obtained was of 1.28 US$/L. The sensibility analysis demonstrated that the pyrolysis and distillation yields are the most important variables to affect the minimum fuel selling price (MFSP).

Over a period of nearly one hundred years, Raul Lino da Silva (1879-1974) experienced the profound political, social and economic changes that marked the twentieth century in Portugal. Having been born during the Constitutional Monarchy (1822-1910), he lived through the First Republic (1910-1926), the Military Dictatorship (1926-1933) and the Second Republic, or Estado Novo (New State, 1933-1974), and died shortly after the Carnation Revolution of 25 April 1974, at the dawning of the Third Republic. Raul Lino was the architect who published the most in Portugal, having become known through his advocacy of the “Campanha da casa portuguesa” (“Portuguese house campaign”), which provoked a great deal of controversy among his peers. He is less known for the transversal quality of his synthesis between architecture, the decorative arts and territory, and its underlying affirmation of an idea of the city, which we conjecture from a diagonal reading of his theoretical and plastic narrative. We limit the analysis to the first half of the 20th century, concentrating on ten case studies, that encompass architectural projects, urbanistic plans and reports. The above expound the broad conception which he defended in the same year as was held the First National Architecture Congress (1948), whose proposals ratified in Portugal the orthodoxy established in 1933 by the International Congresses of Modern Architecture (CIAM). Quoting Aristotle Raul Lino conceived the city as the locus of happiness, shaping the possibilities of consensus between tradition and modernity by means of architecture, which is both envelope and stage for our collective existence. In fact, Raul Lino anticipated themes to be found in the narratives of authors like Aldo Rossi (1966), Paul Virilio (2004, 2009) or Peter Zumthor (2006), and his thought proves particularly relevant and timely in the present day.

In this work, the influence of catalyst reuse and reaction time on the yield and quality of organic liquid products (OLP) obtained in a cracking pilot plant at 450 °C and 1.0 atm has been systematically investigated. The distillation of OLP produced 04 (four) distilled fractions. The quality of the biofuels was certified by physical-chemical analysis, as well as FT-IR and GC-MS analysis. The experimental results showed the feasibility of applying the spent sodium carbonate twice in catalytic cracking of vegetable oils. The physical-chemical properties (density, viscosity, acid value, saponification value, and flash point) of OLP decrease as the reaction time increases. The distillation of OLP yields 62.35% (wt.), producing green-like gasoline, kerosene, and diesel fractions rich in hydrocarbons. Therefore, biofuels-like fractions produced by distillation of OLP have a great potential for replacing partially petroleum derived fuels.

The study of the human microbiome has been a hot topic during the last decades and more recently the skin microbiome has aroused great interest as well. So that, scientists have turned their attention to the role of the skin microbiome in skin health, and its relationship with different disorders as atopic dermatitis, psoriasis, acne, and rosacea, among others. Numerous studies and investigations have been performed to study the role of pre and probiotics as nutraceuticals in the treatment of skin diseases, with growing evidence along the last ten years. This review gathers information on the use of “nutribiotics” in skin care health, focus on the main dermatological diseases and other skin conditions. Clinical studies show that nutribiotics could be a new tool to improve skin health and pre, pro, syn, post and para-probiotics seem to be beneficial on several skin disorders, as well as repairing the skin barrier, or promoting wound healing. In conclusion, skin microbiome has emerged as a new field with high potential to develop disruptive solutions to manage skin health and disease. Future advances in this field may facilitate the treatment of skin dysbiosis being nutribiotics a suitable method for skin care.

Genes encoding regulatory RNAs known as short RNAs (sRNAs) or non-coding sRNAs (ncRNAs), modulate physiological responses through different mechanisms, through RNA-RNA interaction or RNA-protein interaction. These molecules transcribed in trans and in cis relative to the target RNA. They are located between the coding regions of proteins, i.e., in the intergenic regions of the genome and show signals of promoters and termini sequences generally Rho-independent. The size of the ncRNAs genes ranges from ~ 50 to ~ 500 nucleotides and several transcripts are processed by RNase with smaller end products, which modulate physiological responses through different mechanisms, by RNA-RNA interaction or RNA-protein interactions and some interactions may be stabilized by the Hfq chaperone. The Riboswitches constitute another class of ncRNAs, located in the 5'UTR region of an mRNA that promote transcriptional regulation through their interaction with a linker molecule. Recently, in prokaryotes, CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats) regions have described, which repeats of sequences of palindromic bases are. Each replicate consists of short segments of "spacer DNA" from exposures prior to a bacteriophage virus or exogenous plasmid. The CRISPR system consists of an immune system of resistance to exogenous molecules.

The performance of modern wireless communication systems is highly dependent on the adoption of multiple antennas and the associated signal processing. In 5G and 6G networks, beamforming and beam management become challenging tasks due to aspects such as user mobility, increased number of antennas, and the adoption of higher frequencies. Artificial intelligence, and more specifically, machine learning, are efficient tools to reduce the complexity involved in generating beams and the overhead associated with beam management without sacrificing system performance. Therefore, AI-aided beamforming and beam management have received a lot of attention recently. This article presents a complete survey on this topic, emphasizing open problems and promising directions. The discussion includes architectural and signal processing aspects of modern beamforming and beam management. The article presents communication problems and respective solutions using centralized/decentralized, supervised/unsupervised, semi-supervised, active, federated, and reinforcement learning.

Over the last decade, Psidium guajava L. (guava) leaves have demonstrated their in vitro and in vivo effect against Diabetes mellitus (DM). However, there is a lack of literature concerning the effect of the individual phenolic compounds present in the leaves in DM disease. For this reason, the aim of the present work was the in silico evaluation of each phenolic compound. The identification of an 80% ethanol extract of guava leaves revealed the presence of 73 compounds. The in silico study carried out with the DIA-DB web server revealed that aldose reductase was the target protein with heterogeneous affinity. Naringenin exhibited the highest number of interactions with target proteins, and compounds like catechin, quercetin, naringenin and morin displayed similarities with known antidiabetic drugs. In conclusion, the computational workflow showed that guava leaves contain several compounds that can play a therapeutic role in the treatment of DM.

Surimi consists in a technique for concentrating myofibrillar proteins with gelling ability, which aims to make use of by-products from fish slaughter, such as bullfrog back, which can be basis for the manufacture of emulsified products. Due to the strategic need to develop clean label foods, products such as collagen have been reported as potential natural additives with bioactive properties. The objective was to elaborate a surimi from the mechanically separated bullfrog back and to develop an emulsion, replacing the soy lecithin used by hydrolyzed collagen, evaluating its emulsifying and antioxidant potential during 120 days of storage under freezing. Three meat emulsions were prepared: EC0 (100% soy lecithin), EC50 (50% soy lecithin + 50% collagen), and EC100 (100% collagen), which were subjected to analysis of chemical composition, emulsion stability, water holding capacity, luminosity, whiteness, texture profile, TBARS and antioxidant activity. Insertion of collagen increased whiteness, lightness, hardness, and chewiness values compared to the EC0, but showed greater fluid loss. All treatments showed stable WHC values (88 – 91%) over time. Replacement with collagen was satisfactory as an emulsifier and as an antioxidant, and the EC50 and EC100 treatments were not negatively affected in the investigated parameters.

Most Neotropical Psittacidae have a diploid number of 2n=70, and a dichotomy in chromosome patterns. Long-tailed species have biarmed macrochromosomes, while short - tailed ones have telo/acrocentric macrochromosomes. However, the use of chromosome painting with chicken and white hawk probes has demonstrated that karyotype evolution in Psittacidae includes a high number of inter/intrachromosomal rearrangements. Hence, to determine the phylogeny of Long and Short-Tailed species, and to propose a putative ancestral karyotype for this group, we constructed homology maps of Pyrrhura frontalis (PFR) and Amazona aestiva (AAE) and compared them to other previously analyzed long-tailed species. Chromosomes were analyzed by conventional staining and fluorescent in situ hybridization (FISH) using whole chromosome paints of G. gallus (GGA) and L. albicollis (LAL). Conventional staining showed a karyotype with 2n=70 in both species, with biarmed macrochromosomes in Pyrrhura frontalis and telo/acrocentric chromosomes in Amazona aestiva. Comparison of the results with the putative avian ancestral karyotype (PAK) showed fusions in P. frontalis of PAK1p/PAK4q (PFR1) and PAK6/PAK7 (PFR6) with a paracentric inversion in PFR6. However, in A. aestiva there was only the fusion between PAK6/7 (AAE7) with a paracentric inversion. Hybridizations with LAL probes confirmed these results. The results indicate that PFR retained a more basal karyotype than Anodorhynchus hyacinthinus (AHY), Ara macao (AMA) and Ara chloropterus (ACH), because these three species show the fusion PAK8/PAK9 that is not seen in PFR. Hence, we suggest that the ancestral karyotype of species with biarmed chromosomes have the fusions PAK1p/PAK4 and PAK6/PAK7 and, additionally, a pericentric inversion of PAK6/PAK7, while the fusion PAK8/PAK9 would have appeared in the common ancestor of Anodorhynchus hyacinthinus, Ara macao and Ara chloropterus. However, the species A. aestiva shows a characteristic plesiomorphic trait, since PAK1p/PAK4q and PAK8/9 fusions are absent. Our results base on chromosome rearrangements suggest the classification following the criterium of tail length may no reflect the real phylogenetic history of Neotropical Psittacidae.

This work aims to investigate systematically the tecno-economic feasibility of ther-mos-catalytic cracking process for two solid waste materials, a lipid-base material (re-sidual fat/scum from retention box of the University Restaurant of UFPA) and a lig-nin-cellulosic material Açaí seed (Euterpe oleracea. Mart). The thermo-catalytic process-es were carried out in pilot scale (THERMTEK/LEQ/UFPA/IME/RJ), and their economic feasibility analyzed. The yields of biofuels produced by fractional distillation were al-so studied. The physicochemical characteristics of the raw materials, the organic liquid product (bio-oil) and the chemical composition of kerosene, light-diesel and heavy-diesel from the lipid-base material, as well as those of kerosene and light-diesel from the Açaí seed were also determined. The economic indicators for the evaluation of the most viable cracking (pyrolysis) and distillation process of bio-oils were: a) the sim-ple payback criterion, b) discounted payback, c) net present value (NPV), d) internal rate of return (IRR), and e) index of profitability (IP). The analysis of the indicators showed the economic viability of crude palm oil (Elaeis guineensis, Jacq) and unfeasibil-ity for the palm oil neutralization. The minimum fuel selling price (MFSP) obtained is this work for the biofuels was of 1.34 US$/L) and the breakeven point obtained was of 1.28 US$/L. The sensibility analysis demonstrated that the pyrolysis and distillation yields are the most important variables to affect the minimum fuel selling price (MFSP).

Small RNAs (sRNA) are epigenetic regulators of essential biological processes that have been linked to the onset and progression of leukemia, including acute adult T-cell leukemia-lymphoma (ATLL) caused by the retrovirus Human T-lymphotropic virus type 1. Here, we describe the sRNA profile of a 30-year-old female with ATLL at diagnosis and after maintenance therapy, with the goal of correlating their expression levels with response to therapy.

Mercury is classified as one of the world’s most toxic and dangerous pollutants. It tends to bio-accumulate and biomagnify within the trophic chain and is persistent. Various approaches are available to remediate Hg-affected sites, including phytoremediation, which includes the use of plants to clean up contaminated environments. Phytoremediation of mercury contamination is at-tracting increasing attention because of its advantages: it is environmentally friendly, inexpensive, simple, and can improve soil fertility. In this report, VOSviewer, and Bibliometrix software were used to analyze 457 and 697 documents published from 2000 to 2023, retrieved from the data-bases WoS and Scopus, respectively. China, India, the United States, and Spain are the top four most productive countries. The largest topic area was environmental sciences, and the Chinese Academy of Sciences was the organization that contributed the most to the overall number of pub-lications. The keywords with the highest frequency, excluding phytoremediation and mercury in WoS, were heavy metals, accumulation, cadmium, soils, and phytoextraction. In Scopus, the most frequent keywords were bioremediation, heavy metals, soil pollution, bioaccumulation, biodeg-radation, and environmental. From the above analysis, we concluded that future research should focus on 1) finding native plants, 2) increasing remediation ability through assisted phytoremedi-ation, 3) studies of molecular mechanisms in plants with phytoremediation potential, and 4) ge-netic engineering applications. This study provides insight into trending themes and serves as a reference for future research.

Leishmania parasites present astonishing adaptative abilities that represent a matter of life or death within disparate environments during the heteroxenous parasite life cycle. From an evolutionary perspective, organisms develop methods of overcoming such challenges. Strategies that extend beyond the genetic diversity have been discussed and include variability between parasite cells during the infections of their hosts. The occurrence of Leishmania subpopulation fluctuations with variable structural genomic contents demonstrates that a single strain might shelter the variability required to overcome inconsistent environments. Such intrastrain variability provides parasites with an extraordinary ability to adapt and thus survive and propagate. However, different perspectives on this evolution have been proposed. Strains or species living in the same environment can cooperate but also compete. These interactions might increase the replication rate of some parasites but cause the loss of more aggressive competitors for others. Adaptive responses to intra- and interspecific competition can evolve as a fixed strategy (replication is adapted to the average genetic complexity of infections) or an optional strategy (replication varies according to the genetic complexity of the current infection). This review highlights the complexity of interspecies and intrastrain interactions among Leishmania parasites as well as the different factors that influence this interplay.

The aims of study was to evaluate the effects of rates, sources and timing of nitrogen application under cover of transgenic corn yield cultivated in Amazon Biome. The experiments were conducted in Parauapebas city, State of Pará, Brazil, in two years (2016/2017 and 2017/2018). The experimental design was randomized blocks, in a 5x2x2 factorial scheme, consisting of five rates of N (0; 45; 90; 135; and 180 kg ha-1), two nitrogen sources (urea and ammonium sulfate) and two application times of N (phenological stages V4 and V8), with four replications. The factor N rates promoted adjustment of linear equation (leaf area index, mass of thousand grains, and yield) and quadratic equation (dry mass of leaf index). Nitrogen fertilization promoted significant increases in mass of thousand grains and yield, obtaining the best results with 180 kg ha-1 of N applied at V4 phenological stage. Based on results obtained in two years of corn cultivated under conditions of Amazon Biome, the application of N at V4 phenological stage at rates of 121 to 131.39 kg ha-1 of N showed the best results for vegetative growth, while 180 kg ha-1 of N, regardless of source used, urea or ammonium sulfate, promoted greater grain weight and greater yield.

The self-assembly is an intriguing process of great importance in general soft matter and thus re-ceives an ever-growing scientific interest. Its most trivial example is the entropy-driven crystalli-zation of hard spheres. Past works have established the similarities and differences in the phase behavior of monomers and chains made of hard spheres. In the present work, inspired by the dif-ference in the melting points of the pure components, we study, through Monte Carlo simulations, the phase behavior of athermal mixtures composed of fully flexible polymers and individual monomers of uniform size. We analyze how the relative number fraction and the packing density affect crystallization and the established ordered morphologies. A synergetic effect is observed in the crystallization leading to synchronous crystallization of the two species. Structural analysis of the resulting ordered morphologies shows perfect mixing and thus no phase separation, which could split the system into polymer-rich and monomer-rich domains. Due to the constraints imposed by chain connectivity, the local environment of the individual spheres is systematically more spherical and more symmetric compared to the one of spheres belonging to chains. In general, increasing polymer content leads to reduction of the degree of crystallinity. According to the present findings, relative concentration is another determining factor to control the phase behavior of hard colloidal systems based on polymers.

Abstract: (1) Background: Surgery is the best curative option for Gastric Cancer (GC). However, morbimortality associated with surgery still a significant problem. Thus, it is essential to determine the preoperative surgical risk, to optimize outcomes in higher risk patients. (2) Methods: Patients who underwent curative gastrectomy between January 2010 and December 2013 were included, obtaining a sample of 131 patients, and the acuity of the scales understudy was evaluated. The predictive power of the scales was evaluated through calibration and discrimination. (3) Results and Conclusions: Regarding mortality, the scales demonstrated good calibration, with POSSUM and P-POSSUM obtaining the best O:E ratio. The scales presented good discrimination, with POSSUM showing the best result. Considering morbidity, the scales showed good calibration and discrimination. POSSUM and P-POSSUM seem to have potential in predicting morbidity and mortality when applied to the studied population, but there is a need for further studies in this area.

Brazil has ideal conditions for the large-scale use of cabotage cargo transportation: a vast coastline with almost 7,400 km, approximately 70% of the population resident in a coastal range of up to 200 km from the coast and a strong concentration of activities economic along the coast. However, there is an absolute domain of road modal for the transportation of goods, and cabotage is underused. The purpose of the study was to raise the main barriers that negatively impact the performance of Brazilian cabotage. To this end, it was used to bibliographic and documentary research, based on studies already published in journals, doctoral theses, master's dissertations, congress annals, technical reports and research on government-related government agencies sites, navigation companies and entities related to cabotage. The main barriers that contribute to the low use of cabotage in Brazil were identified and analyzed, as well as possible alternatives of solution for sustainable development of this mode of transport. Such a study will certainly serve as subsidies for the definition of public policies aimed at better use of Brazilian cabotage, as well as to encourage navigation companies to invest more in the transport of goods by cabotage, in order to contribute to the reduction of trucks on highways Brazilian and for environmental preservation.

Polyalcohol liquefaction can be done by acid or basic catalysis producing polyols with different properties. This study compared the mechanical properties of foams produced using polyols from liquefied Cytisus scoparius obtained by acid and basic catalysis and using two different foam catalysts. The differences were monitored using FTIR analysis. Acid-catalyzed liquefaction yielded 95.1 %, with the resultant polyol having an OH index of 1081 mg KOH/g while basic catalysis yielded 82.5 %, with a similar OH index of 1070 mg KOH/g. Generally, compressive strength with dibutyltin dilaurate (DBTDL) ranged from 16 - 31 kPa (acid-liquefied polyol) and 12 -21 kPa (base-liquefied polyol), while with stannous octoate (TIN), it ranged from 17 - 42 kPa (acid) and 29 - 68 kPa (base). Increasing water content generally decreased the compressive modulus and strength of foams. Higher water content led to a higher absorption at 1670 cm-1 in the FTIR spectrum due to the formation of urea. Higher isocyanate indices generally improved compressive strength, but high amounts led to unreacted isocyanate that could be seen by a higher absorption at 2265 cm-1 and 3290 cm-1. DBTL was shown to be the best foam catalyst due to higher trimer conversion seen in the spectra by a higher absorption at 1410 cm-1. Acid and base-derived polyols lead to different polyurethane foams with different FTIR spectra, particularly with a higher absorption at 1670 cm-1 for foams from acid-derived liquefaction.

Historically, fortified wines originated in Europe, and they have in common a high alcohol content to increase their shelf-life during long journeys to northern Europe and the American continent. Nowadays, the world’s better-known Marsala, Port, Sherry, and Vermouth due to their high alcoholic content, sweet taste, and intense aromatic profile, are designated as dessert wines and sometimes served as aperitifs. This review gives an overview of the traditional vinification process, including the microbiota and autochthonous yeast, the use of aromatic botanicals, and regulatory aspects of the main Italian, Portuguese, and Spanish fortified wines. The wine-making process is essential to defining the volatile organic compounds (VOCs) that characterize the aroma of each fortified wine, giving them an organoleptic fingerprint and “terroir” characteristics. The various volatile and odorous compounds found in fortified wines during oxidative and thermal aging are discussed in the last part of this review.

This study aimed to evaluate the physico-chemical properties, biocompatibility and bioabsorption of 3 different new membranes for bone guided regeneration (PLGA associated with hydroxyapatite and beta-TCP) with three thicknesses (200, 500 and 700 µm) implanted in mice subcutaneously. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and the quantification of Carbon, Hidrogen and Nitrogen were used to characterize the physico-chemical properties. One hundred Balb-C mice were divided into 5 experimental groups: Group 1 - Sham (without implantation); Group 2 - 200 μm; Group 3 - 500 μm; Group 4 - 700 μm; and Group 5 - Pratix®. Each group was subdivided into four experimental periods (7, 30, 60 and 90 days). Samples were collected and processed for histological and histomorphometrical evaluation. The membranes showed no moderate or severe tissue reactions in the experimental periods studied. The 500 μm membrane did not show tissue reaction for any experimental periods studied. The 200 μm membrane membranes began to exhibit fragmentation after 30- day, while the 500 and 700 µm membranes started the fragmentation at 90-day. All membranes studied were biocompatible, and the 500µm membrane showed the best results being a promissory membrane for bone guided regeneration.

Brushless Synchronous Machines (BSM) are replacing conventional synchronous machines with static excitation in generation facilities due to the absence of sparking and lower maintenance. However, this excitation system makes challenging measuring electric parameters in the rotor. This fact highly difficult the detection of ground faults, which are the most common type of electrical fault in electric machines. In this paper, a ground fault detection method for BSM is proposed. It is based on an inductive AC/DC rotating current sensor installed in the shaft. In case of a ground fault in the rotating parts of the BSM, a fault current will flow through the rotor’s sensor, inducing voltage in its stator. Analyzing the frequency components of the induced voltage the detection of a ground fault in the rotating elements is possible. The ground faults detection method proposed covers the whole rotor and discern between DC and AC sides. To corroborate the detection method, experimental tests have been performed using a prototype of this sensor connected to laboratory synchronous machines achieving satisfactory results.

The high transmissibility, rapid evolution, and immune escape of SARS-CoV-2 variants can influence the course of infection and, in turn, morbidity and mortality in COVID-19, posing a challenge in controlling transmission rates and contributing to the emergence and spread of new variants. The factors that shape viral genetic variation are consequently essential for understanding the evolution and transmission of SARS-CoV-2, especially in vaccinated individuals where immune response plays a role in the progression and spread of this disease. This study assessed. In this context, we evaluated the impact of immunity induced by the CoronaVac vaccine (Butantan/Sinovac) on intra-host genetic diversity, analyzing 118 whole-genome sequences of SARS-CoV-2 from unvaccinated and vaccinated patients infected with the Gamma variant. Vaccination with CoronaVac favors negative selection at the intra-host level in different genomic regions and prevent greater genetic diversity of SARS-CoV-2, which may help reduce the emergence of new mutations, reinforcing the importance of vaccination in reducing virus transmission.

This paper presents a review on numerical and experimental methods to predict fracture of ad-vanced high strength steels (AHSS). AHSS are widely processed through sheet metal forming processes. Although being an excellent choice when lightweight, high strength and ductility are critical factors, their multi-phase microstructure accentuates forming challenges. To accurately model forming behavior, necking based failure criteria as well as direct fracture models require improvements. As a necking based failure model, the conventional forming limit diagram/curve (FLD/FLC) presents limitations such as in estimating direct fracture (surface cracks, edge cracks, shear cracks), as well as deformation histories under nonlinear strain paths. Thus, significant re-search efforts are being made towards the needs of advanced fracture constitutive models capa-ble of predicting fracture scenarios without necking, more frequently observed in the realm of AHSS. Scientific community research is divided into several directions aiming at improving the forming and fracture behavior accuracy of parts subjected to sheet metal forming operations. In this review paper, a comprehensive overview on ductile fracture modeling is presented. Firstly, the FLD/FLC limitations modeling fracture behavior in sheet metal forming operations are stud-ied. Followed by the recent trends in constitutive material modeling. Afterwards, material char-acterization methods advancements to cover a broad range of stress states are comprised. Final-ly, damage and fracture models predicting failure in AHSS are investigated. This review paper supplies relevant information on the current issues the sheet metal forming community is chal-lenged with due to the trend towards AHSS employment in the automotive industry.

In this study, the gravimetric characterization and analysis of the solubilized extract of the organic fraction of Urban Household Solid Waste (RSDU) from the municipality of Belém do Pará was carried out in order to obtain the composition of the collected materials and the characteristics of the liquid resulting from the solubilization of these materials . The waste used to carry out this research was collected door-to-door, in which the points and neighborhoods served were determined through the sectorization of these locations and representative statistical sampling. For the sectorization of neighborhoods, family income values ​​were considered as the main parameter. After collecting the solid waste, the material was sent to the facilities of the Federal University of Pará (FUPa), where the waste was classified into paper, cardboard, tetrapak, rigid plastic, soft plastic, metals, glass, organic matter, waste toilets, fabrics and others. The organic fraction of solid waste was separated and sent to the drying, crushing and packaging processes. Subsequently, the solubilized extract of the organic fraction of solid waste was obtained, following the methodology recommended by NBR standard nº 10.006/2004, of the Brazilian Association of Technical Standards and the values ​​obtained were compared with Ordinance GM/MS nº 888/2021 and CONAMA Resolution nº 357/2005, in addition to results obtained by other authors. After carrying out the gravimetric characterization, it was possible to obtain the average proportions of 5.09% paper, 3.20% cardboard, 0.94% tetrapak, 3.58% rigid plastic, 9.97% soft plastic, 2.00% metals, 55.57% organic matter, 1.86% glass, 14.26% sanitary waste, 3.23% fabrics and 3.00% other waste. High values ​​of organic residues were found in the gravimetric composition, which can be explained by the collection method used and the high humidity of the organic solid residues. In the analyzes of the solubilized extract, values ​​of Hp (3.69 to 4.92), Turbidity (791 to 1,733 uT), Apparent Color (8,500 to 12,500 uC), True Color (6,000 to 14,000 uC), Total Dissolved Solids (5,330 to 8,040 mg/L), Total Nitrogen (201.80 to 359.90 mg/L), Ammoniacal Nitrogen (161 to 289 mg/L), Nitrate (10 to 40 mg/L), Total Phosphorus (52.30 to 166.80 mg/L) and Chemical Oxygen Demand (28,701 mg/L to 38,608 mg/L), in addition to other measured parameters, in which such information makes it possible to check the similarities of the waste solubilization conditions to that of leachates from landfills, in addition to not being in compliance with environmental and health legislation, demonstrating risks to the local environment and public health.

This review aimed to analyze the effects of additives in the process of producing silage from re-hydrated corn grains for ruminants. Control treatment studies used in this analysis was corn grain rehydrated with water only. To be included in the review, the studies needed to follow stand-ardized criteria, including the absence of additives in the control treatment and the evaluation of the silage in beef animals, such as cattle, goats, and sheep. A total of seven publications, published between 2014 and 2022, were included in the final dataset. To compare the results, the PROC ANOVA of SAS was used, which included a random effect of comparison within the study, per-forming a paired comparison. It was observed that the use of additives did not influence the chemical composition, pH, organic acid and ethanol content, microbial population, fermentative losses, aerobic stability, and dry matter in vitro digestibility of rehydrated corn grain silage (p >0.05). Based on this information, it is concluded that the use of additives in rehydrated corn grain silage did not show major differences on silage quality. It is important, however, to evaluate the effects of additives in silages on animal performance.

Injuries of repetitive efforts constitute one of the prime causes of absenteeism in the workplace, have bear a considerable cost for the public health system and can cast doubt on the sustainability of a company. The objective of this paper is to build, in the researchers, the needed knowledge to choose a set of relevant scientific articles about repetitive strain injuries in the poultry meat industry, aiming identify characteristics in those scientific publications that have the potential to contribute on the topic of this paper. The research is characterized as exploratory-descriptive, draws on primary and secondary data sources. The study involves the application of a method for selection and analysis of the selected articles. To this end, the method utilized was the Knowledge Development Process – Constructivist (Proknow-C) as theoretical intervention instrument. Within the process development, it was obtained a portfolio of 16 articles aligned to the research and scientifically recognized with the main periodicals, papers, authors and keywords. The ProKnow-C process allowed identify opportunities in the literature about injuries in the poultry meat industry and showed opportunities for research future. This paper, under the constructivist perspective, presents a structured process to build, in the researcher, the necessary knowledge to identification, selection and analysis of relevant scientific articles relating to research context and, for these articles, find prominences and opportunities for a research theme without similar publications.

Background: The study demonstrates the sustainable synthesis of translucent zinc oxide (ZnO) nanowires using Moringa seed extract, highlighting eco-friendly and sustainable approaches. Methods: Characterization techniques such as X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) confirmed the formation of ZnO nanostructures with diverse morphologies, including nanowires and spherical clusters. Results: The synthesized ZnO nanowires exhibited remarkable photocatalytic activity, achieving over 89% degradation efficiency of methylene blue (MB) under UV light within 80 minutes, demonstrating their potential for wastewater treatment applications. Conclusions: The research findings support Sustainable Development Goals (SDGs) related to clean water, climate action, and life below water and on land, highlighting the role of eco-friendly nanostructures in environmental remediation. The dual advantage of Moringa seed extract, providing both a sustainable synthesis route and health benefits due to its rich content of vitamins and phytochemicals, underscores the potential of integrating natural resources in nanotechnology for environmental and health applications.

The analysis of the morphological features can be framed in different temporal and spatial scales, depending on the specific objectives and methodologies of the various scientific fields that find in them a valuable source of information. The inventory and assessment of the geomorphological heritage may be based not exclusively in geophysical factors, but also in its contribution to the structuring of the biosphere, in its interrelation with other types of heritage or even in its potential for research or education purposes. In this article, we proceeded to the selection of a set of geomorphosites, at different scales, in Serra do Alvão (northern Portugal), seeking to demonstrate the importance of the broad lines of relief and intermediate and detailed landforms to the organization of the cultural landscape. Based on a questionnaire applied to a sample of 104 persons, it was intended to assess the value of the geomorphosites, concerning the scientific, preservation, use, cultural and educational dimensions.

This study explores the effect of seasonality on soil carbon efflux and pasture growth based on field and lysimeter experiments during summer-fall and winter-spring in two years. Focus is also pointed on irrigation strategies to alleviate the crop response to seasonal fluctuations in precipitation and surface temperatures. Soil respiration, soil and air temperature, leaf photosynthesis, plant dry weight and leaf area index were quantified and analyzed. It has been found significant differences in the CO₂ efflux between the two growing season. Emission of soil CO₂ allowed to characterize and to prioritize the temperature and rain influence in seasonal brachiaria response. During the seasons, the transient variation of CO₂ efflux was highly correlated with rainfall (r = 0.87, P < 0.05), and poorly correlated with soil temperatures (r = 0.5, P < 0.05). The CO₂ efflux and plant response to different level of reposition of evapotranspiration demonstrated that irrigation during fall mitigates the reduction of growth conditioned by drying soil and the lower temperatures. The lower temperatures are limiting only when the soil moisture is below 32% of the field capacity. Thus, we propose to keep the soil moisture around 50% during the fall as a key practices for mitigating the effect of seasonality and its intensification with the climate change, even more if added to management routine practices the soil and water conservation.

Diabetes and its complications are a global health burden, necessitating novel therapeutic approaches. Natural products and derivatives are gaining attention as potential agents for managing diabetes due to their diverse constituents and pharmacological activities. Algae, in particular, offer promising bioactive compounds with antidiabetic properties. This review provides an overview of natural products derived from algae in diabetes management, including advancements and future prospects. It highlights the significance of natural products in diabetes, explores algae's diversity, bioactive compounds, and mechanisms of action. The challenges, limitations, and strategies for optimizing algae-based interventions are discussed, alongside future research directions. Algae's multifaceted pharmacological activities and chemical constituents make them attractive for developing novel antidiabetic therapeutics. Further research and optimization of algae-based interventions have the potential to address the global burden of diabetes and improve patient outcomes.

The coffee industry loses millions of dollars annually worldwide due to the Coffee Berry Borer (CBB); these losses imply a decrease in quality and production. Traps are used to monitor their flight and for pest control. The main objective was to determine the flight pattern and trap capture percentages of the CBB population over time using column traps (CTs) in two independent field experiments. CTs were composed of four traps installed at four different heights 0.5, 1.5, 2.5, and 3.5m above ground. Our results demonstrated a significant difference in CBB capture by traps placed at different heights above the ground. The CT capture maintained a pattern throughout this study's lag; the lower the height, the greater the percentage of CBBs captured. In Experiments A and B, the traps placed at 0.5m caught 67% and 85% of the CBBs captured, respectively. Furthermore, the trap set at 1.5m above the ground in the multi-level CT showed a higher capture percentage than the individually placed trap (also at 1.5m). The pattern of the capture and proportion of the CBB in the CTs were maintained throughout the study despite the season, changes in temperature, and relative air humidity. We suggested that CTs could be explored as a useful tool for capturing the CBB, considering its monitoring and management.

This article examines the diagnosis of the Agricultural Innovation System (SIA) in the department of Tolima, Colombia, as part of a project led by the Colombian Ministry of Agriculture and Rural Development and the Technological University of Pereira (TUP), which also evaluated the National Agricultural Innovation System (NAIS) in regions such as Chocó, Bolívar, and Meta. A methodology was used that involved a survey with 58 questions on a Likert scale to 300 participants, evaluated with congruence and relevance indexes, identifying key variables in the operation of the Agricultural Innovation System (AIS). A survey was also applied to actors of the National Innovation System for Higher Education in Agriculture, A survey was also applied to map the participating actors in the regional agricultural innovation systems of Tolima to identify gaps in extension, innovation, development, sustainability, ICT, education and training. Among the conclusions, it stands out that the associativity subsystem presents the lowest lag and is close to a score of two on the scale of gaps, evaluation carried out among the five subsystems including extension, ICT, environmental aspects, and pub-lic policy. The department of Tolima shows low performance in innovation and ICT, while the extension is less lagging. In Chaparral there is a general lag, with innovation being the worst evaluated subsystem. Rovira obtains high scores in most subsystems, although innovation and ICT have lower scores. At the national and regional levels, innovation is low, and articulation among NARS actors is insufficient, which highlights the need to promote good practices, strategies, and projects.

This study was conducted to determine the effect of different types of olive cake (five treatments) in the diet of Bísaro pigs on the volatile compounds and sensory characteristics in the dry-cured loin and dry-cured “cachaço” (2 processed meat products). The treatments applied are based on the type of extraction and this may imply differences in their water and fat content. Eighty com-pounds were identified, and grouped into eight chemical classes: hydrocarbons, aldehydes, es-ters, alcohols, ketones, acids, furans, and other compounds. Aldehydes and alcohols were the ma-jor groups of compounds, representing 57.06-66.07 % and 68.67-75.61 % for the loin and “cacha-ço”, respectively. There were no significant differences between treatments for any of the volatile compounds identified. The major aldehydes were hexanal, heptanal, pentanal, and propanal. These compounds were significantly higher (p<0.001) in “cachaço”. This significant difference be-tween the two types of dry-cured products is directly related to the amount of total fat content. The major alcohols were 2.3-butanediol, 1-octen-3-ol, 1-butanol, 3-methyl, 1-hexanol, benzyl-alcohol and glycidol. Except for compounds 2,3-butanediol and benzyl-alcohol, the majority in this group are significantly different in terms of the type of dry-cured product. As for the sensory evaluation, for both dry-cured products, the trained tasters did not detect significant differences between the different treatments, which is in line with the results obtained for volatile compounds.

The urban mangrove of the Vitória Bay, Espírito Santo, Southern Brazil suffers from anthropogenic impacts, which interfere in the foliar spectral response of its species. Identifying the spectral behavior of these species and creating regression models to indirectly obtain structure data like the Leaf Area Index (LAI) are powerful environmental monitoring tools. In this study, LAI was obtained in 32 plots distributed in four stations. In situ LAI regression analysis with the SAVI resulted in significant positive relationships (r² = 0.58). Forest variability regarding the degree of maturity and structural heterogeneity and LAI influenced the adjustment of vegetation indices (VIs). The highest regression values were obtained for the homogeneous field data, represented by R. mangle plots, which also had higher LAI values. The same field data were correlated with SAVI of a RapidEye image for comparison purposes. The results showed that, images obtained by a UAV have higher spatial resolution than the Rapideye image, and therefore had a greater influence of the background. Another point is that the statistical analysis of the field data with the IVs obtained from the RapidEye image did not present high regression coefficient (r² = 0.7), suggesting that the use of VIs applied to the study of urban mangroves needs to be better evaluated, observing the factors that influence the leaf spectral response.

The severity of the ongoing COVID-19 outbreak demand from countries to adopt extreme measurements of social isolation to stop the spread and flatten the curve of contamination. Although social isolation measures may have negative impacts on economy, historically it has been showed to be more effective in saving lives and less damaging to economy than not adopting these measurements during a viral pandemic. In Brazil, despite the positioning of the president against social isolation due to the consequent economic recession, the rapid spread of the virus has worried the governors of the Brazilian states, which are thus managing stringent social isolation measurements to avoid the advance of the virus. Since one of the main strategies to guarantee progress and economic growth in Brazil has been the exploitation of natural resources from the Amazonia biome, here we discuss the importance of this biome to Brazilian economy during the post-pandemic recession and highlights potential strategies to burst the economy without promoting Amazonia destruction. We show that, together with the REDD+ and the Amazon Fund, the Forest bonds represents good strategies to burst Brazilian economy in a sustainable way, showing that it is possible to improve the commodities without increasing Amazonia deforestation or the greenhouse gases emissions. Amazonia is a biome of global importance for the avoidance of another global crisis, which will occur if we reach the climatic tipping point of 1.5°C. Thus, governmental actions should go towards its preservation, not exploitation and depletion. The commitment of the government with environmental conservation is paramount so that these economic strategies have positive results, especially in a post-pandemic scenario, where the economy will be extremely weakened. The COVID-19 brings us a lesson regarding how our attitudes can impact the world, and what we can expect from a global crisis. Perhaps we can apply these lessons and focus on change our economy towards a sustainable direction to avoid another global crisis in the years to come.

This paper aims to analyze the effects of Covid-19 on financial markets from the perspective of Complexity. The Covid-19 pandemic has caused turmoil in financial markets and is already one of the most important financial crises in history, causing a fall in several stock markets as well as great volatility. Unlike past crises, which in most cases were caused either by problems of fiscal deficits or in the financial system, this crisis has its origin in an epidemic disease, which occurred in Wuhan, China, and quickly spread across the globe affecting transport networks, commerce and finance, and will affect the public debt of many countries. This is a systemic situation in which there is a need to consider several interconnected systems, financial instability and high financial risk, something that econophysics and some complexity theorists already do. Therefore, this paper intends to show, theoretically, the systemic and complex character of the recent financial crisis caused by Covid-19.

Nanocelluloses have gained significant attention in recent years due to singular properties (good biocompatibility, high optical transparency and mechanical strength, large specific surface area and good film-forming ability) and wide-ranging applications (paper, food packaging, textiles, electronics and biomedical). This article is a comprehensive review of nanocelluloses from the preparation methods to their applications in conservation and restoration of historical paper documents. The novelty lies in the information collected about nanocelluloses as renewable, environmentally friendly and sustainable materials in the field of preservation of cultural heritage as an alternative to conventional methods. Several studies have demonstrated that nanocelluloses, with or without other particles, impart to the paper documents excellent optical and mechanical properties, very good stability against temperature and humidity aging, stronger antibacterial and antifungal activity, high protection to UV light and do not require additional adhesive.

Fogo volcano erupted in 2014-15 producing an extensive lava flow field in the summit caldera that destroyed two villages, Portela and Bangaeira. The eruption started with powerful explosive activity, lava fountains, and a substantial ash column accompanying the opening of an eruptive fissure. Lava flows spreading from the base of the eruptive fissure produced three arterial lava flows. By a week after the start of the eruption, a master lava tube had already developed within the eruptive fissure and along the arterial flow. In this paper, we analyze the emplacement processes on the basis of observations carried out directly on the lava flow field, remote sensing measurements carried out with a thermal camera, SO₂ fluxes, and satellite images, in order to unravel the key factors leading to the development of lava tubes. These were responsible for the rapid expansion of lava for the ~7.9 km length of the flow field, as well as the destruction of the Portela and Bangaeira villages. The key factors leading to the development of tubes were the low topography and the steady magma supply rate along the arterial lava flow. Comparing time-averaged effusion rates (TADR) obtained from satellite and Supply Rate (SR) derived from SO₂ flux data, we estimate the amount and timing of the lava flow field endogenous growth, with the aim of developing a tool that could be used for hazard assessment and risk mitigation at this and other volcanoes.

This study explores the relationship between positive and negative habits and their rewards over time. Using a bibliographic and documentary approach, we analyze how the temporality of rewards influences the formation and maintenance of habits. We developed the "habit chart", which shows that positive habits, such as reading, healthy eating, physical exercise, meditation and personal relationships, offer incremental and lasting rewards. In contrast, negative habits such as sugar consumption, excessive use of social media and a sedentary lifestyle provide immediate gratification followed by a sharp decline. The analysis was based on studies such as those by Warburton et al. (2006), Lally et al. (2010), and Hu (2003) for positive habits, and Malik et al. (2010) and Kross et al. (2013) for negative habits. We conclude that practical strategies, such as financial incentives and creating enabling environments, can make long-term rewards more tangible, promoting the adoption of healthy behaviors. This study reinforces the importance of the temporality of rewards in habit formation and suggests evidence-based interventions to improve quality of life and general well-being.

HU is the Hypergeometrical Universe Theory (HU)[1-8], proposed in 2006, where the Universe is a Lightspeed Expanding Hyperspherical Hypersurface and Gravitation is an absolute-velocity-dependent, epoch-dependent force. Here we introduce the Big Pop Cosmogenesis and show our calculations associated with the Equation of State of the Universe. This article is the first in a series of articles[9-22] supporting the paradigm shift.

The concept of artisanal products has been largely discussed mainly due to concerns about the inappropriate use of the term that may cause confusion for the consumers. Cheeses are important food models to evaluate consumers’ and producers’ perception about artisanal foods worldwide. Thus, the objective of the present study was to evaluate the perception of consumers and cheesemakers towards artisan foods, focusing on artisanal cheeses. For this purpose, two focus group were performed either with cheese producers and with consumers to discuss the topic. Colonial and Serrano cheeses, traditional and cultural dairy products in Brazil, were used as food model for the discussion. Producers and consumers related artisan foods to small scale of production, handicraft and freshness. Affective memories were also an important issue related to artisanal cheeses. For cheesemakers, artisan cheeses must be produced with unpasteurized milk, which was not cited by consumers. Consumers disclosed the intention of pay a premium price for food products that present artisan seals on front-package-label, mainly due to the guarantee of acquiring a quality product. The confusion about artisanal and traditional food concepts were observed, which is a subject to be deeply evaluated further. The findings provide useful implications to policy makers and institutions that can influence citizens’ attitudes and consumption patterns of artisanal products.

The El Niño-Southern Oscillation (ENSO) stands as the paramount tropical phenomenon of climatic magnitude resulting from ocean-atmosphere interaction. Due to its atmospheric teleconnection mechanism, ENSO wields influence over diverse environmental variables spanning distinct atmospheric scales, thereby potentially impacting the spatiotemporal distribution of atmospheric aerosols. Within this framework, this study aims to appraise the relationship between ENSO and atmospheric aerosols across the Legal Amazon during the period between 2006 and 2011. Over this quinquennium, four ENSO events were identified. Concurrently, an analysis was conducted on the spatiotemporal variability of aerosol optical depth (AOD) and AOD extinction for Black Carbon (EAOD-BC), concomitant with said ENSO events, utilizing data derived from the Aerosol Robotic Network (AERONET), MERRA-2 model, and ERSSTV5. Through the Windowed Cross Correlation (WCC) approach, statistically significant phase lags of up to 4 to 6 months were observed between ENSO indicators and atmospheric aerosols. Moreover, conspicuous increases of over 100% in atmospheric aerosol concentration were evidenced subsequent to El Niño periods, especially during the intervals encompassing the La Niña phase, particularly within the La Niña CP (Central Pacific)/Modoki category. By analyzing specific humidity anomalies (QA), exceptional scenarios in the region were detectable. This observation suggests a notable singularity when juxtaposed with antecedent investigations and typical average patterns characterizing the impacts on the Amazonian region.

Conclusions: It could be concluded that small/medium scale dairy plants can use UF equipment with the aim to valorize sheep´s and goat´s CW through the production of dairy formulations with added prebiotics and probiotics, while reducing the environmental impact of their activities.

Introduction: Bovine tuberculosis is a zoonotic disease of considerable impact, especially in livestock countries, which can cause human disease. Despite its importance, Colombia is a country in which few studies analyse its behaviour, and none develop maps using geographic information systems to characterise it. Objective: To describe the temporal-spatial distribution of bovine tuberculosis in Colombia between 2001 and 2019. Methods: Retrospective cross-sectional descriptive study, based on reports by the Colombian Agricultural Institute, of tuberculosis surveillance in cattle on farms in Colombia from 2001 to 2019. The data were converted into databases in Microsoft Access 365®, and multiple epidemiological maps were generated with the Kosmo RC1®3.0 software coupled to shape files of all the country's departments. Results: During the study period, 5,273 tuberculosis cases in bovines were identified in the different departments of Colombia (mean 278 cases/year). Regarding its temporal distribution, the number of cases varied from a maximum of 903 cases (17.12% of the total) in 2015 to a minimum of 0 between 2001 and 2004 and between 2017 and 2019 (between 2005 and 2016, the minimum was 46 cases, 0.87%). Conclusions: GIS is an essential tool for understanding the temporospatial behaviour of zoonotic diseases in Colombia, as is the case of bovine tuberculosis, with its potential implications for Human and One Health.

Human T-lymphotropic virus type 1 (HTLV-1)–associated myelopathy/tropical spastic paraparesis (HAM/TSP) is a slowly progressive spinal cord disorder with no effective treatment. There is much of interest in developing potential biomarkers for predicting the pathogenesis of HAM/TSP disorder. This study used Illumina massive parallel sequencing (MPS) technology to assess the cellular global noncoding RNAome expression profile in HAM/TSP patients (n = 10), asymptomatic HTLV-1 infected carriers (ASP, n = 8), and a second group of healthy controls (n = 5). Using various bioinformatics tools, the sRNA MPS reads were aligned, annotated, and profiled. There were 251 known and 50 potential novel sRNAs among the 402 detected sRNAs in the HAM and ASP groups versus the HC group. Sixty-eight known sRNAs were found to be significantly different between the ASP and HAM groups. In HAM vs ASP subjects, 88 mature miRNAs were downregulated. Three of these miRs (hsa-miR-185-5p, 32-5p, and 192-5p) have the potential to be used as biomarkers for predicting the pathogenesis of HAM/TSP. The top seven deregulated miRS target genes were linked to a variety of biological processes and molecular functions. Relevant reactome pathways to our findings provide a rich source of data and an opportunity to further understand sRNA regulation and function in HTLV-1 pathophysiology.

Aging is a complex biological process, with gradual and progressive decline in structure and function in many organ systems. Our objective is to determine if structural changes produced by aging, vary with sex, in a stressful situation such as dehydration. The expression of Slc12a3 mRNA in renal cortex, α-smooth muscle actin (α-SMA) and fibronectin, was evaluated in male and female rats aged 3 and 18 months submitted or not to water deprivation (WD) for 48 hours. When comparing ages, 18-month-old males showed lower expression of Slc12a3 mRNA than 3-month-old males, and control and WD 18-moth-old male and female rats exhibited higher expression of α-SMA than respective 3-month-old rats. Fibronectin was higher in both control and WD 18-month-old males than respective 3-month-old males. In females, only control 18-month-old rats showed higher fibronectin than control 3-month-old rats. When we compared sex, control and WD 3-month-old female rats had lower expression of Slc12a3 mRNA than re-spective males. WD 18-month-old male rats presented higher expression of fibronectin and α-SMA than WD 18-month-old female rats. When we compared hydric condition, WD 18-month-old males displayed lower relative expression of Slc12a3 mRNA and higher α-SMA expression than control 18-month-old males. Aging, sex, and dehydration lead to alteration in kidney structure.

Background: The role played by the non-dominant parietal lobe in motor cognition, attention and spatial awareness networks has potentiated the use of awake surgery. When this is not feasible, asleep monitoring and mapping techniques should be used to achieve an onco-functional balance. Objective: This study aims to assess the feasibility of a dual-strip method to obtain direct cortical stimulation for continuous real-time cortical monitoring and subcortical mapping of motor and visual pathways simultaneously in parietal lobe tumour surgery. Methods: Single-centre prospective study between May’19-November’20 of patients with intrinsic non-dominant parietal-lobe tumours. Two subdural strips were used to simultaneously map and monitor motor and visual pathways. Results: Fifteen patients were included. With regards to motor function, a large proportion of patients had abnormal interhemispheric resting motor threshold ratio (iRMTr) (71.4%), abnormal Cortical Excitability Score (CES) (85.7%), close distance to the corticospinal tract – Lesion-To-Tract Distance (LTD) – 4.2mm, Cavity-To-Tract Distance (CTD) – 7mm and intraoperative subcortical distance - 6.4mm. Concerning visual function, the LTD and CTD for optic radiations (OR) were 0.5mm and 3.4mm, respectively; the mean intensity for positive subcortical stimulation of OR was 12mA±2.3mA and 5/6 patients with deterioration of VEPs>50% had persistent hemianopia and transgression of ORs. 12 patients remained stable, one patient had a de-novo transitory hemiparesis, and two showed improvements in motor symptoms. A higher iRMTr for lower limbs was related with a worse motor outcome (p=0.013) and a longer CTD to OR was directly related with a better visual outcome (p=0.041). At 2 weeks after hospital discharge, all patients were ambulatory at home and all proceeded to have oncological treatment. Conclusion: We propose motor and visual function boundaries for asleep surgery of intrinsic non-dominant parietal tumours. Pre-operative abnormal cortical excitability of the motor cortex, deterioration of the VEP recordings and CTD<2mm from the OR were related to poorer outcomes.

In the last decade, the integration of robots into agricultural tasks has significantly transformed food production from planting to harvest. The precision and efficiency of a robot allow for specialized crop management in cases such as; plant disease identification, optimization of water and fertilizer use, monitoring of environmental and soil conditions, among others. That is, the adoption of robots in agricultural practices through intelligent automation increases crop yields and decreases environmental impact. Intelligent automation faces contemporary challenges such as climate change and population growth, promoting sustainable food security. Therefore, this article presents a review of the state of the art of modular robots and their applications in agriculture. Modular robots have the ability to reconfigure and adapt to different tasks, promoting versatile solutions for the agricultural sector. These solutions are linked to the robot's control systems, which can be centralized, decentralized, and hybrid. Firstly, centralized control allows for unified management and coordination in high-precision tasks. Secondly, the decentralized approach offers flexibility and robustness in changing environments where adaptability is required. Thirdly, hybrids incorporate features of both control types balancing control and autonomy to increase efficiency and effectiveness in practical applications. In some cases, control systems incorporate bio-inspired motion control techniques, where the robot mimics natural movements and behaviors to improve its adaptability in performing a task. For example, the chemosynthesis model, which is a biological process where bacteria convert an inorganic compound into energy, has been adapted for individual robots to explore and navigate their environment. Therefore, this article presents an overview of modular robots, the incorporation of bio-inspired motion control techniques, and their convergence towards the sustainable solution of contemporary problems in the agro-industry.

In bone tissue engineering, ceramics have been the choice due to their excellent biological properties. But the paradigm changed with the discovery of bioactive glasses (BGs) in 1969 by Larry Hench and co-workers, due to their ability to bond to living tissues through the formation of an interfacial bone-like hydroxyapatite layer when the bioglass was put in contact with biological fluids in vivo. Among a number of tested compositions, the one exhibiting the highest bioactivity index is the well-known trademarked 45S5 Bioglass®. The topic received increasing attention particularly after 1985 when this material entered in the market of biomedical devices, inspiring many other investigations aiming at further exploring the in vitro and in vivo performances of this BG, or developing other related BG compositions. The research efforts gradually revealed a number of shortcomings of 45S5 Bioglass®, mostly derived from its high sodium content, initially intended to decrease the melting temperature and accelerating the degradation of the silicate network over time. But the extensive release of sodium from 45S5 Bioglass® in the biological fluids creates a high pH cytotoxic environment. Other serious drawbacks include a fast degradation rate, and a poor sintering ability, which hinders the reliable fabrication of porous scaffolds. Therefore, sol-gel was regarded as an attractive alternative to prepare alkali-free BG compositions. The process uses inorganic and/or organic precursors, which undergo hydrolysis and condensation at room-temperature, being less costly. When properly conducted, the sol-gel process might result in amorphous structures with all the components intimately mixed at the atomic scale. Moreover, developing new better performing materials for bone tissue engineering is a growing concern, as the ageing of the world’s population leads to lower bone density and osteoporosis. This work describes the sol-gel synthesis of a novel quaternary silicate-based BG with the composition 60 SiO2 – 34 CaO – 4 MgO – 2 P2O5 (mol%) was prepared using acidified distilled water as single solvent. By controlling the kinetics of the hydrolysis and condensation steps, an amorphous glass structure could be obtained. The results of XRD of samples calcined within the temperature range from 600-900 ºC demonstrated that amorphous nature was maintained until 800 ºC, followed by partial crystallization at 900 ºC. The specific surface area, an important factor in osteoconduction, was also evaluated over different temperatures, ranging from 160.6 ± 0.8 m2/g at 600 ºC down to 2.2 ± 0.1 m2/g at 900 ºC, being accompanied consistent changes in average pore size and agreeing pore size distribution. The immersion of the BG particles in simulated body fluid (SBF) led to the formation of an extensive apatite layer on its surface. These overall results indicate the proposed material is very promising for biomedical applications in bone regeneration and tissue engineering.

This study evaluated the grain size and high organic content from drinking water treatment sludge (DWTS) in the properties of ceramics. Samples were studied using raw and oven dried DWTS at 110 °C in two granulometries (0.180 mm and 0.075 mm), with and without calcination (550 °C), as partial replacement of two soils commonly used in ceramic production. Specimens were prepared with 5, 10, and 20% DWTS and calcined at 950 °C to determine their chemical, physical, mineralogical and mechanical properties. The DWTS reduced the density and increased the absorption and shrinkage of the specimens after calcination. An increase in strength with up to 10% sludge, driven by the presence of fluxing agents, was verified. The processing method had little influence on the properties of ceramic with above 10% of sludge. In conclusion, the use of raw DWTS obtained better results with low energy usage for its reuse.

Stress is an inherent sensation of being unable to handle demands and occurrences. If not properly managed, stress can develop into a chronic condition, leading to the onset of additional chronic health issues like cardiovascular illnesses and diabetes. Various stress meters have been suggested in the past, along with diverse approaches for its estimate. However, in the case of more serious health issues such as hypertension and diabetes, the results can be significantly improved. This study presents the design and implementation of a distributed wearable sensor computing platform with multiple channels. The platform aims to estimate stress levels in diabetes patients by utilizing a fuzzy logic algorithm that is based on the assessment of several physiological indicators. Additionally, a mobile application was created to monitor users' stress levels and integrate data on their blood pressure and blood glucose levels. Validation experiments were performed on patients with chronic diabetes, and the initial findings are presented in the study.

Although the influence of climate on the fire regime is unanimously recognized, most publications are studies on this influence are at the global scale. Therefore, this study aims to demonstrate the role of climate in the incidence of wildfires at the country and regional scale using statistical analysis and machine learning methods. Mainland Portugal was chosen as a case study due to its climate and because it is the European region most affected by wildfires. Results demonstrate the climate signature in the spatial and temporal distribution of the wildfire incidence. The conclusions of the study include (i) the existence of two pyro-regions, with different types of climate (Csb and Csa) composed of NUTS II regions: the northern region composed of the Norte and Centro regions and the southern region composed of Alentejo and Algarve; (ii) the intra-annual variability in the incidence of wildfires, characterized by two peaks, one in spring and the other in summer, are a consequence of the country's type of climate; and, (iii) how the annual cycle of wildfire incidence varies over the years depends on the weather conditions throughout each year. These results are of fundamental importance for wildfire managers, especially in the context of climate change.

Hazelnut shells (HS), scientifically known as Corylus avellana L. shells, are a waste produced in companies that process nuts. The main objective of this study was to find an efficient way to maximize the chemical potential of HS by solubilizing the hemicelluloses, which could then be used to recover sugars and at the same time increase the lignin content of this material in order to produce adhesives or high strength foams. In order to optimize the pre-hydrolysis process, two different temperatures (160 and 170 C) and times varying from 15 to 180 min were tested. All the remaining solid materials were then liquefied by polyalcohols with acid catalysis. The chemical composition of hazelnut shells was determined before and after the pre-hydrolysis. All the process was monitored by FTIR-ATR by determining the spectra of solids and liquids after pre-hydrolisis and liquefactions steps. The highest solubilization of hazelnut shells was found for 170 C and 180 min, resulting in a 25.8% solubilization. Chemical analysis after the hydrolysis process showed a gradual increase in the solubilization of hemicelluloses as both the temperature and time of the reactor were increased. Simultaneously, the percentages of α-cellulose and lignin in the material also increased with rises in temperature and duration. FTIR-ATR allowed for the detection of significant spectral changes in the hazelnut shells from their initial state to the solid residue and further into the liquefied phase. This confirmed that pre-hydrolysis was effective in enhancing the chemical composition of the material, making it more suitable for the production of adhesives or polyurethane foams with enhanced mechanical strength.

The number of physical devices connected to the Internet such as vehicles, household appliances and other "things" has been steadily increasing in recent years, thus forming the basis for the Internet of Things (IoT). IoT ecosystem extends beyond country borders and application domains, combining thousands of versatile devices that differ in terms of their structures, capabilities, and available resources. It is therefore not surprising that the landscape of wireless communication technologies and the degree of IoT devices available today is excessively broad and diverse. Interference between networks leads to frame collisions and consequent packet loss. Frame collisions occur when two or more packets overlap in time and frequency and use the same Long Range (LoRa) parameters, i.e. the same Spreading Factor (SF), Bandwidth (BW) and Carrier Frequency (CF). When most devices use the same configuration, collision probability is higher. The probability of frame collisions is also affected by traffic characteristics, particularly the periodicity of the transmission and the payload size. Larger payload sizes and more frequent transmissions accumulate with higher Time on Air (ToA) and channel occupancy [1]. Transmission powers and the location of the gateways also influences this situation. The aim of this experimental work is to verify the effects of collisions and interference in Long Range Wide Area Network (LoRaWAN), regarding the periodicity of transmissions and the payload sizes in a context of an inter-SF interference scenario. And to validate measuring tools like Received Signal Strength Indicator (RSSI), ToA and Packet Delivery Ratio (PDR) in the reliability of a network. We validate our conclusions by analyzing ToA according with RSSI and different data sizes, the RSSI for different SFs and different data sizes and finally the packet loss through the PDR for a better understanding of the reliability of packet transmission in our link. In the end we conclude that in an environment with inter-SF interference, the choice of SFs and packet lengths impacts ToA. When dealing with multiple devices near gateways, different SFs and varying packet lengths can lead to increased latency and longer ToA. Consequently, the risk of packet loss becomes more significant, especially if the signal-to-interference ratio (SIR) is low. This limitation will therefore affect scalability, particularly in Non-Line-Of-Sight (NLOS) scenarios.

This article presents a unique set of voltage and current data from a public building and acquired using a hybrid measurement solution that combines Python and Grafana. The transversal purpose consists of contributing to the community with a vision of the quality of the supply more oriented to the monitoring of the state of the network, providing a more realistic vision, which allows a better understanding, and the adoption of the best decisions to achieve the efficient energy management and thus optimize the operation and maintenance of power systems. The work focuses on higher order statistical estimators that, combined with exploratory data analysis techniques, improve the characterization of the shape of the stress signal. These techniques and data, together with the acquisition and monitoring system, present a unique combination in the line of low-cost measurement solutions. It also incorporates the underlying benefit of the contribution to industrial benchmarking. The paper also includes a computational comparison between Python and LabVIEW to elicit the performance of the measurement solution.

Empirical Orthogonal Functions (EOF) analysis between the anomalies of Lake Titicaca water levels (WLs) and the Pacific Interdecadal Oscillation (IPO) reveals a correlation coefficient of 0.71 between the WLs and the principal component (PC1). These findings demonstrate the high accuracy of the IPO in representing the positive and negative phases of the water levels. By utilizing wavelet functions, we identified multi-decadal variability with periods ranging between 20 and 30 years. The statistical techniques employed indicate a relationship between IPO and ENSO; however, they operate on different timescales of climate variability. The IPO exhibits longer-term variability, typically spanning 20-30 years, while ENSO events occur on average every 2-7 years. Nevertheless, the IPO has the ability to modulate the strength and frequency of El Niño and La Niña events, and vice versa. During the positive phase of the IPO, there is a tendency for more frequent and intense El Niño events, accompanied by fewer La Niña events. This can be attributed to warmer sea surface temperatures in the central and eastern Pacific, which create favorable conditions for El Niño development. Conversely, during the negative phase of the IPO, there is a tendency for more frequent and intense La Niña events, with fewer occurrences of El Niño events, due to cooler sea surface temperatures in the central and eastern Pacific.

Background: COVID-19 is currently one of the most important medical challenges as it affects the entire population with children being infected as easily as adults. Objective: The study evaluated the mortality of under 17-year-olds and compare the frequency with that of adults in a cohort of 8986 COVID-19 positive patients hospitalized in a single care center. Design: retrospective clinical trial, all hospitalizations of COVID-19 positive patients as diagnosed by RT-qPCR were analyzed by revisiting their medical records. Setting: 8986 COVID-19 positive patients hospitalized in a Hospital de Base and the Infant and Maternal Hospital of São Jose do Rio Preto, SP, Brazil (HB/HCM) being these totals of 383 COVID-19 positive under 17-patients. Patients: patients COVID-19 positive under 17-year-olds were grouped by age and evaluated by analyzing their medical records. They were categorized as Group I, children, and adolescents under 19 years old and Group II, adults over 19 years. Results: Overall mortality in under 19-year-olds was 12 deaths, that is, 3.13% of the patients in this age group and 0.55% of the overall mortality from COVID-19. Mortality in the group of adults was 2197 equivalent to 24.45% of the hospitalized adults and 99.45% of overall deaths. Mortality was significantly higher for adults than for under 19-year olds (p-value < 0.0001). Regarding the different ages of children and adolescents, the number of deaths of under 1-year olds was 2/123 (1.62%), of 1-4 years it was 4/95 (2.11%), of 5-9 years it was 1/47 (2.13%), of 10-14 years it was 1/40 (2.5%) and of 15-19 years it was 4/78 (5.13%). There were no statistical differences between the different age groups ( p-value = 0.3). Conclusion: Mortality from COVID-19 in children and adolescents was lower than in adults and generally associated with other comorbidities with the main association being with heart disease.

The concept of ecosystem services (ESs) provides a valuable approach to communicate societies' dependence on natural ecosystems, assisting in the evaluation of measures to protect vegetation in watersheds that promote water-related ESs. Vegetation cover and land use are important factors related to the capacity of ecosystems to provide soil loss regulation and sediment retention services, which are highly relevant for sediment management in watersheds draining into reservoirs with multiple water uses. This study aims to assess the relationship between potential changes in land use and land cover and the sediment retention service provided by riparian vegetation in a watershed draining into a hydroelectric reservoir in the Brazilian Cerrado. Sediment load was selected as a physical variable that affects different water uses in reservoirs, with these uses being dependent on the quality or quantity of stored water. Scenarios were analyzed to represent landscape reconfigurations from a baseline condition in order to account for the recovery of riparian vegetation by the agricultural sector, as foreseen in the Brazilian Forest Code. To map and quantify variations in annual sediment retention, the InVEST model was used, which allows estimating an integrated response of the drainage basin to large-scale land use changes over time and space. The results show that for the drainage basin of the Corumbá IV Hydroelectric Power Plant (HPP), the recovery of riparian areas occupied by annual crops has the potential to generate greater benefits to water use in the reservoir. In the studied catchment area, 14% of the total vegetation deficit in riparian areas is occupied by crops, while 86% is occupied by pastures. This highlights the buffering role of riparian vegetation as an effective practice for managing sediment flows originating from sheet erosion in agricultural landscapes. The methodology employed in this study allows for the quantification and mapping of the effects of soil and water conservation measures in river basins. This enables the prioritization of sectoral efforts for the restoration of native vegetation, considering the highest returns in benefits perceived by water users affected by sediment input in reservoirs. The study's results reinforce the importance of conserving vegetation in riparian areas and their surroundings for sediment retention, highlighting the role of these areas as assets in providing water-related ecosystem services.

The use of large-scale antenna arrays grants considerable benefits in energy and spectral efficiency to wireless systems due to spatial resolution and array gain techniques. By assuming a dominant line-of-sight environment in a massive MIMO scenario with favorable propagation, we derive analytical expressions for the sum-capacity. % Then, we show that convenient simplifications on the sum-capacity expressions are possible when working at low and high SNR regimes. % Furthermore, in the case of a high SNR regime, it is demonstrated that the Gamma PDF can approximate the PDF of the instantaneous channel sum-capacity as the number of BS antennas grows. A second important demonstration presented in this work is that a Gamma PDF can also be used to approximate the PDF of the summation of the channel's singular values as the number of devices increases. Finally, it is important to highlight that the presented framework is useful for LPWAN's as we show that the transmit power of each device can be made inversely proportional to the number of BS antennas.

In this brief letter we report our initial results on the application of deep-learning to the massive MIMO channel estimation challenge. We show that it is possible to estimate wireless channels and that the possibility of mitigating pilot-contamination with deep-learning is possible given that the leaning model underwent an extensive training-phase and that it has been presented with a large number of different channel conditions.

The Physical Random Access Channel (PRACH) plays an important role in LTE and LTE-A systems. It is through the PRACH channel that the user equipment (UE), based on eNodeB's timing estimates, aligns its uplink transmissions to the eNodeB's uplink and gain access to the network. One of the initial operations executed by the PRACH receiver at eNodeB side is the translation of the PRACH signal back to base band, $i.e.$, center the PRACH signal around DC. This operation is a necessary step for preamble detection and can be carried out through a time-domain frequency shift operation. Therefore, in this paper we present the hardware architecture and implementation details of a configurable and optimized FPGA-based time-domain frequency shifter. It is a hardware-efficient and accurate architecture for converting the relevant received PRACH signal into base band before further signal processing. The architecture is manly based on a customized Numerically Controlled Oscillator (NCO), which is used for generating complex exponentials employing only adders, a Look-Up Table (LUT) and plain logic resources. The main advantage of the proposed hardware architecture is that it completely eliminates the need for storing a large number of long complex exponential sequences by employing a single LUT and exploiting quarter wave symmetry of the basis waveform. Our simulation results show that the proposed customized NCO architecture provides high Spurious Free Dynamic Range (SFDR) signals using a minimal amount of FPGA resources. Moreover, the proposed architecture exhibits spur-suppression ranging from 62.13 to 153.58 dB without using Taylor Series correction.

This paper proposes the use of compressive sensing to tackle the Massive MIMO channel estimation problem. As our results show compressive sensing-based estimators perform as well as the optimum MMSE estimator.