A methodology for selecting rational parameters of atmospheric aircrafts at the initial stages of design using an optimization algorithm of differential evolution and numerical mathematical modeling of aerodynamics problems is proposed. The technique involves the implementation of weight and aerodynamic balance in the main flight modes, has the ability to consider atmospheric aircrafts with one or two lifting surfaces, apply parallel calculations and automatically generate a three-dimensional geometric model of aircraft appearance based on the optimization results. A method for accelerating the process of optimizing the parameters of an aircraft in terms of take-off weight by more than three times by introducing a objective function into a set of design variables is proposed and demonstrated. The results of assessing the reliability of the used mathematical models of aerodynamics and the correctness of the calculation the objective function, taking into account various constraints, are presented. A comprehensive test of the performance and efficiency of the methodology is considered by solving demonstration problems to optimize more than ten main design parameters the appearance of two existing heavy-class unmanned aerial vehicles with known characteristics from open sources.

This article describes the choice of an optimization algorithm for solving problems and the optimal design of an unmanned aerial vehicle propeller. To solve the problem using evolutionary algorithms, it was transformed into an unconstrained optimization problem using a penalty function. The airfoil contours were constructed using a Bezier curve. Design variables were divided into two types: those that describe in general terms the propeller geometry or operation, such as propeller diameter, number of blades, and rev/min; and those that vary with propeller radius, such as chord length, effective airfoil angle, and airfoil geometry. The objective function is the calculation of the propeller power required to achieve a given thrust. The differential evolution algorithm was used to solve this problem.

We advance binational link-tracing sampling design, an innovative data collection methodology for sampling from transnational social fields, i.e., transnational networks embedding migrants and non-migrants. This paper shows the practical challenges of such a design, the representativeness of the samples and the qualities of the resulted networks. We performed 303 face-to-face structured interviews on sociodemographic variables, migration trajectories and personal networks of people living in a Romanian migration sending community (Dâmbovița) and in a migration receiving Spanish town (Castellón), simultaneously in both sites. Inter-connecting the personal networks, we built a multi-layered complex network structure embedding 4,855 nominated people, 5,477 directed ties (nominations) and 2,540 edges. Results indicate that the participants’ unique identification is a particularly difficult challenge, the representativeness of the data is not optimal (homophily on observed attributes was detected in the nomination patterns), and the relational and attribute data allow to explore the social organization of the Romanian migrant enclave in Castellón, as well as its connectivity to other places. Furthermore, we provide methodological suggestions for improving link-tracing sampling from transnational networks of migration. Our research contributes to the emerging efforts of applying social network analysis to the study of international migration.

Antimicrobial peptides (AMPs) are essential components of innate immunity across all species. AMPs have become the focus of attention in recent years as scientists are addressing antibiotic resistance, a public health crisis that has reached epidemic proportions. This family of peptides are a promising alternative to current antibiotics due to their broad-spectrum antimicrobial activity and tendency to avoid resistance development. A subfamily of AMPs interact with metal ions to potentiate their antimicrobial effectiveness, as such they have been termed metalloAMPs. In this work, we review the scientific literature of metalloAMPs that enhance their antimicrobial efficacy when combined with the essential metal ion, zinc (II). Beyond the role played by Zn(II) as a cofactor in different systems, it is well-known that this metal ion plays an important role in innate immunity. Here, we classify the different types of synergistic interactions between AMPs and Zn(II) into three distinct classes. By better understanding how each class of metalloAMPs uses Zn(II) to potentiate their activity, researchers can begin to exploit these interactions in the development of new antimicrobial agents and accelerate their use as therapeutics.

Background: The concept of Quality of Work Life (QWL) has been built multidimensionally through social reproduction; it is impacted by the perceptions of each individual and by the relationship between workers and the work environment. Objective: to analyze the Work Process and QWL of assisting nurses in public health. Methods: Research in a critical paradigm, descriptive, exploratory with a qualitative approach. The population corresponds to Nurses who work in care work. Semi-structured guiding questions were applied and were analyzed with content analysis. Results: seven participants declared female; all Chilean; seven are young adults; six singles; only one has children, and one has a person dependent on her care; six are heads of household, and five receive help with housework. All have a nursing degree, five have a diploma, but none have a postgraduate. Work Process has three subcategories: work object, instrument, organization, and work conditions; the QWL category has six subcategories: definition and perception of QWL, QWL potentiating factors, QWL exhausting factors, QWL improvement strategies, the emotional burden associated with QWL, and Health problems. Conclusions: In this way, the lifestyle built by the assistance in the health area has repercussions on the quality of life and health in general.

Thermostatically controlled loads have great potential to make a significant contribution to improving energy efficiency in the building sector, which is responsible for 40% of greenhouse gas emissions in the EU. This, in addition to the environmental damage, represents a huge expense in the electricity bill. Therefore, it is very important to train engineers on how to design energy management systems for TCLs. With this goal in mind, it would be very useful to have a simulation-based educational tool (SBET) to understand thermostatically controlled loads, their characteristics and possibilities in energy efficiency. In addition, it would be very useful if this tool could be introduced in engineering curricula to help students to be better trained and enter the labor market with more opportunities. Based on the shortcomings detected, this work develops a SBET specifically designed to teach about TCLs (SBET-TCLs), both about their intrinsic characteristics and their better management. To verify the developed SBET-TCL, it has been tested in a real scenario: A survey was carried out among the students of the subject 'Alternative Energy Sources' of the degrees of Industrial Engineering. The results show that the use of SBET-TCL has very positive effects on the learning process.

The acoustic conditions of open-plan office spaces influence wellbeing and productivity perceived by users, but with an inadequate evaluation for workspace, acoustic design in open-plan offices can be a factor that alters user performance. Such is the case in Mexico, where there are no adequate standards to evaluate specific acoustic conditions such as intelligibility. For this reason, this case study aims to evaluate different types of measurement methods for intelligibility. This study was carried out in a university in northern Mexico. The sound measurements were based on the Mexican standard for noise analysis and the ISO 3382- part 3 standards for acoustic measurements for open-plan offices. The psychoacoustic parameters evaluated were Reverberation and Intelligibility, using objective methods determined on S/N and subjective methods based on loss of consonant; where it was analyzed distance between sound source and zones classified by building design characteristics. The results indicated in which points the intelligibility effects increased, observing that Reverberation remained stable in this office, and that the subjective methods presented greater size of the measured sound effect than the objective methods. This finding establishes that subjective methods conformed to Lognormal behavior, which is applicable to other linguistic elements describing speech behavior.

In this work, we propose an easy and a low cost method for the synthesis of Nitrogen-Doped Graphene NDG and its silver nanowires NW functionalization NWGN. The synthesis was performed using the improved graphene oxide method, chemical reduction of graphene oxide in the presence of caffeine as green nitrogen source and the subsequently the silver nanowires growth in the surface, by the chemical reductions salts in the presence of NG. Achieving a homogeneous growing (coating) of graphene sheets. The samples were analyzed using conventional characterization techniques: SEM-EDX, XRD, FT-IR, RAMAN, TEM, HRTEM, STEM and XPS.

The food system, the most important driver of planetary transformation, is in a deep crisis. Therefore, seeking a sustainable and socially-fair transition pathway becomes an issue of utmost priority for our own survival. The consideration of food as a commodity, a social construct that played a central role in driving this crisis, remains the uncontested narrative to lead the different transition pathways what seems rather contradictory. By exploring the normative values in the transition landscape, this paper seeks to understand how relevant is the hegemonic narrative of “food as commodity” and its alternative of “food as commons” to determine transition trajectories and food policy beliefs. Applying the Multi-level Perspective framework and developing the ill-studied “agency in transition”, this research enquired food-related professionals that belong to an online community of practice (N=95) on valuation of food dimensions and agency in food transitions to check whether the valuation of food is relevant to explain personal stances in transition. Results suggest the socially-constructed view of food as commodity is positively correlated to the gradual reforming attitude, whereas food as commons is positively correlated to the counter-hegemonic transformers regardless the self-defined position in the transition landscape (regime or niches). At personal level, there are multiple loci of resistance with counter-hegemonic attitudes in varied institutions of the regime and the innovative niches, many of them holding this discourse of food as commons. Conversely, alter-hegemonic attitudes are not positively correlated to this alternative discourse and they may inadvertently or purportedly reinforce the ‘‘neoliberal narrative’’. Food as commons, a different narrative whose rationale is explained in the paper, seems to be a relevant framework that could enrich the multiple transformative constituencies that challenge the industrial food system and therefore facilitate the convergence of movements that reject the commodification of food.

Advances in communication technologies have made the interaction of small devices, such as smartphones, wearables, and sensors, scattered on the Internet, bringing a whole new set of complex applications with ever greater task processing needs. These Internet of Things (IoT) devices run on batteries with strict energy restrictions. They tend to offload task processing to remote servers, usually to Cloud Computing (CC) in datacenters geographically located away from the IoT device. In such a context, this work proposes a dynamic cost model to minimize energy consumption and task processing time for IoT scenarios in Mobile Edge Computing environments. Our approach allows for a detailed cost model, with an algorithm called TEMS that considers energy, time consumed during processing, the cost of data transmission, and energy in idle devices. The task scheduling chooses among Cloud or Mobile Edge Computing (MEC) server or local IoT devices to better execution time with lower cost. The simulated environment evaluation saved up to 51.6% energy consumption and improved task completion time up to 86.6%.

Taeniid infections pose a significant threat to both animal and public health, as certain tapeworms within this group can also infect humans, potentially leading to severe health conditions. Therefore, this calls for preventive and control measures, such as regular deworming of dogs. While the efficacy of deworming has been established in developed countries, there is a paucity of reported deworming practices in rural areas of developing countries, such as Tanzania. This study aims to understand determinants for helminth treatment-seeking behavior towards control of cestodial taeniid infections in rural settings in northern Tanzania. A cross-sectional study was undertaken in agropastoral and pastoral areas of northern Tanzania. Comprehensive data from household surveys in selected sub-villages were collected to ascertain dog ownership, dog deworming practices, and the availability of dewormers. Analytical methods were employed to discern how various determinants influenced deworming practices among dog owners in these communities. Awareness of dewormers specifically formulated for dogs emerged as a pivotal factor affecting dog deworming practices. Dog owners who were informed about appropriate dog dewormers were nearly two times more likely to engage in deworming compared to those with limited knowledge (OR = 1.78, 95% CI 1.77 - 4.18, p < 0.001). A majority 32(51.6%, 95% CI: 38.7-64.3) acknowledged accessing dewormers for livestock within their wards. Praziquantel a potent dewormer on cestodes was least known to most dog owners 2(13%, 95% CI: 2.3-41.6). Praziquantel, a potent and common dewormer effective against cestodial taeniid infections, remains relatively unknown in rural areas of northern Tanzania. Therefore, more awareness on appropriate deworming agents against taeniids in dogs should be raised in rural dog-keeping communities.

In recent years, online social networks have received important consideration in spatial modelling fields given the critical information that can be extracted from them for events in real time; one of the most latent issues is that regarding various natural disasters such as earthquakes. Although it is possible to retrieve data from these social networks with embedded geographic information provided by GPS, in many cases this is not possible. An alternative solution is to reconstruct specific locations using probabilistic language models, more specifically those based on Name Entity Recognition (NER), which extracts names from a user’s description about an event occurring in a specific place (e.g., a collapsed building on a specific avenue). In this work, we present a methodology to use twitter as a social sensor system for disasters. The methodology scores NER locations with a kernel density estimation function for different subtopics originating from a natural disaster and that maps them into a geographic space is proposed. The proposed methodology is evaluated with tweets related to the 2017 earthquake in Mexico.

Of the documented tick-borne diseases infecting humans in Mexico, Rocky Mountain spotted fever (RMSF), caused by the gram-negative bacterium Rickettsia rickettsia, is responsible for most fatalities. Given recent evidence of brown dog tick, Rhipicephalus sanguineus sensu lato, as an emerging vector of human RMSF, we aimed to evaluate dogs and their ticks for rickettsiae infections as an initial step in assessing the establishment of this pathosystem in a poorly studied region of northeastern Mexico while evaluating the use of dogs as sentinels for transmission/human disease risk. We sampled owned dogs living in six disadvantaged neighborhoods of Reynosa, Northern Mexico to collect whole blood and ticks. Of 168 dogs assessed, tick infestation prevalence was 53%, comprised of exclusively R. sanguineus s. l. (n=2,170 ticks). Using PCR and sequencing, we identified an overall rickettsiae infection prevalence of 4.1% (n=12/292) in ticks, in which eight dogs harbored at least one infected tick. Rickettsiae infections included R. amblyommatis and R. parkeri, both of which are emerging human pathogens, as well as candidatus R. andeanae. This is the first documentation of pathogenic Rickettsia in R. sanguineus s.l. collected on dogs from northeastern Mexico. Domestic dog infestation with Rickettsia-infected ticks indicates ongoing transmission, thus humans are at risk for exposure and underscores the importance of public and veterinary health surveillance for these pathogens.

The Eurasian grapevine (Vitis vinifera L.) is the most widely grown horticultural crop in the world and is important for the economy of many countries. In the wine production chain, grape varieties play an important role as they directly influence the authenticity and classification of the product. Identifying the different grape varieties is therefore fundamental for quality control and inspection activities, as well as for regulating production. Currently, ampelography and molecular analysis are the main approaches to identifying grape varieties. However, both methods have limitations. Ampelography is subjective and prone to errors and is experiencing enormous difficulties as ampelographers are increasingly scarce. On the other hand, molecular analyses are very demanding in terms of cost and time. In this scenario, Deep Learning (DL) and Machine Learning (ML) methods have emerged as a classification alternative to deal with the scarcity of ampelographs and avoid molecular analyses. In this study, the most recent and current methods for identifying grapevine varieties using DL classification-based approaches are presented through a systematic literature review. The classification pipeline of the 31 studies found in the literature was described, highlighting its pros and cons. Most of the studies used DL-based models trained with leaf images acquired in a controlled environment at a maximum distance of 1.2 metres to classify grape varieties. In addition, there is a large gap between practical applications and the datasets used: a great lack of varieties, limited data acquired in the field and a lack of tests on plants under adverse conditions. Potential directions for improving this area of research were also presented.

Site Index has been widely used as an age normalised metric to account for variation in forest height at a range of spatial scales. Although previous research has used a range of modelling methods to describe regional variation in Site Index little research has examined gains that can be achieved through use of regression kriging or spatial ensemble methods. In this study an extensive set of environmental surfaces were used as covariates to predict Site Index measurements covering the environmental range of \textit{Pinus radiata} D. Don plantations in Chile. Using this dataset, the objectives of this research were to (i) compare predictive precision of a range of geostatistical, parametric and non-parametric models, (ii) determine if significant gains in precision can be attained through use of regression kriging, (iii) evaluate the precision of a spatial ensemble model that utilises predictions from the five most precise models, through using the model prediction with lowest error for a given pixel and (iv) produce a map of Site Index across the study area. The five most precise models were all geostatistical and included ordinary kriging and four regression kriging models that were based on partial least squares or random forests. A spatial ensemble model constructed from these five models was the most precise of those developed (RMSE = 1.851 m, RMSE% = 6.38%) and had relatively little bias. Climatic and edaphic variables were the strongest determinants of Site Index and in particular, variables related to soil water balance were well represented within the most precise predictive models. These results highlight the utility of predicting Site Index using a range of approaches, as these can be used to construct a spatial ensemble that may be more precise than predictions from the constituent models.

Power generation using renewable technologies has become a primordial option to satisfy the energy demand all over the world, being solar concentrating technologies widely applied for this purpose. A combination of Parabolic Trough Collector with Direct Steam Generation has been considered an excellent option for power generation, due to the economic cost and complexity in the plant are reduced. The thermal evaluation of the solar power plant as well as the PTC in the DSG process is very important in viability and economic analysis. In this sense, as the main objective of this work, a numerical tool for evaluating DSG with PTC technology has been developed. The software SOLEEC is a versatile, reliable, accurate and friendly to the user for thermally evaluating a DSG with PTC technology. The user has the possibility to compare the thermal behavior of different geometrical dimensions for a PTC; and even consider different materials; in order to satisfy the demand of superheated steam by a DSG process. The software has an error less than 5% when compared with literature results and in this paper is used to evaluate a power plant in Mexico obtaining that the change to DSG proposing different PTC could reduce the solar field about 35%.

With the developments of smart technologies, the use of rare earth elements (REEs) knows a widespread use, thus, their importance as valuable and strategic metals boosted to levels never known before. Due to their scarcity in Earth crust, the recovery of these elements from secondary resources also knows further developments. Traditional pyrometallurgical and hydrometallurgical processing, though of wide use, in the recovery of these REEs, have some environmental drawbacks, thus, the development of new recovery approaches are under developments. Here, Solvometallurgy appeared as a friendly environmental technology, and ionic liquids and deep eutectic solvents re-sulted as a first-row chemicals to be used in the different unit operations used in solvometallurgical processing: leaching, liquid-liquid extraction, ion exchange (adsorption), precipitation and elec-trolysis. This manuscript reviewed the most recent literature concerning the use of ionic liquids and deep eutectic solvents in the recovery of REEs from various sources.

This work (in two parts) will review the recently developed predictive modeling methodology called “4th-BERRU-PM” and its applicability to energy systems as exemplified by an illustrative application to the Polyethylene-Reflected Plutonium (acronym: PERP) OECD/NEA reactor physics benchmark. The acronym 4th-BERRU-PM designates the “Fourth-Order Best-Estimate Results with Reduced Uncertainties Predictive Modeling” methodology, which yields best-estimate results with reduced uncertainties for the first fourth-order moments (mean values, covariance, skewness, and kurtosis) of the optimally predicted posterior distribution of model results and calibrated model parameters. The 4th-BERRU-PM uses the Maximum Entropy (MaxEnt) principle to incorporate fourth-order experimental and computational information, including fourth (and higher) order sensitivities of computed model responses to model parameters, thus incorporating, as particular cases, the results previously predicted by the second-order predictive modeling methodology 2nd-BERRU-PM, and vastly generalizing the results produced by extant data assimilation and data adjustment procedures. The 4th-BERRU-PM methodology encompasses the scopes of high-order sensitivity analysis (SA), uncertainty quantification (UQ), data assimilation (DA) and model calibration (MC). The application of the 4th-BERRU-PM methodology to energy systems is illustrated by means of the above-mentioned OECD/NEA reactor physics benchmark, which is modeled using the neutron transport Boltzmann equation involving 21976 imprecisely known parameters, the solution of which is representative of “large-scale computations.” The model result (“response”) of interest is the leakage of neutrons through the outer surface of this spherical benchmark, which can be computed numerically and measured experimentally. Part 1 of this work illustrates the impact of high-order sensitivities, in conjunction with parameter standard deviations of various magnitudes, on the determination of the expected value and variance of the computed response in terms of the first four moments of the distribution of the uncertain model parameters. Part 2 of this work will illustrate the capabilities of the 4th-BERRU-PM methodology for combining computational and experimental information, up to and including forth-order sensitivities and distributional moments, for producing best-estimate values for the predicted responses and model parameters while reducing their accompanying uncertainties.

This paper presents a system for identification of wind features, such as gusts and wind shear. These are of particular interest in the context of energy-efficient navigation of Small Unmanned Aerial Systems (UAS). The proposed system generates real-time wind vector estimates and a novel algorithm to generate wind field predictions. Estimations are based on the integration of an off-the-shelf navigation system and airspeed readings in a so-called direct approach. Wind predictions use atmospheric models to characterize the wind field with different statistical analyses. During the prediction stage, the system is able to incorporate, in a big-data approach, wind measurements from previous flights in order to enhance the approximations. Wind estimates are classified and fitted into a Weibull probability density function. A Genetic Algorithm (GA) is utilized to determine the shaping and scale parameters of the distribution, which are employed to determine the most probable wind speed at a certain position. The system uses this information to characterize a wind shear or a discrete gust and also utilizes a Gaussian Process regression to characterize continuous gusts. The knowledge of the wind features is crucial for computing energy-efficient trajectories with low cost and payload. Therefore, the system provides a solution that does not require any additional sensors. The system architecture presents a modular decentralized approach, in which the main parts of the system are separated in modules and the exchange of information is managed by a communication handler to enhance upgradeability and maintainability. Validation is done providing preliminary results of both simulations and Software-In-The-Loop testing. Telemetry data collected from real flights, performed in the Seville Metropolitan Area in Andalusia (Spain), was used for testing. Results show that wind estimation and predictions can be calculated at 1 Hz and a wind map can be updated at 0.4 Hz. Predictions show a convergence time with a 95% confidence interval of approximately 30 s.

Statistical denoising techniques have been well studied, however many challenges still remain. This 9 article focuses on determining the least necessary number of significant samples in a statistical pop-10 ulation sampling, while minimizing the impact on the statistical detection of the fiber Bragg grating 11 (FBG) power spectra. This is achieved by using Bayesian decision making, small population statis-12 tics while excluding false detection. First, we investigate the impact of two-sided sliding window 13 technique applied near the cell under the test. The window size varies from 8 to 60 samples. The 14 considered maximum size of population sampling is connected with the number of wavelength 15 samples within the bandwidth of the symmetrical FBG power spectra peaks. Regarding the sym-16 metry of FBG power spectra peaks and the possible reduction of computational demands, we inves-17 tigate the impact of a one-sided sliding window. This enables to achieve less processing latency for 18 real time applications thus brings benefits to FBG-based fiber optical sensing. Both, two- and one-19 sided small population sampling techniques are then experimentally verified. Detection results are 20 analyzed in depth via calculating detection thresholds by using the small size window sliding along-21 side the waveband. From results achieved, it was found that the normality three-sigma rule does 22 not need to be followed while using the small population sampling. Experimental demonstrations 23 and analyses showed that the proposed concept of denoising and statistical threshold detection 24 based on the sliding window does not depend on the prior knowledge of probability distribution 25 functions of the FBG power spectra peaks level and background noise. We have also found that the 26 thresholds’ adaptability mainly depends on the statistical numerical characteristics of the above ad-27 ditive mixture of the FBG power spectra peaks signals and background noise.

Abstract: Assessing infection by a parasite, such as Haemonchus contortus, requires time and experienced personnel. Field-based diagnostics using metagenomic species-specific targeting methods would be beneficial. Here, we examine two helminth control methods, zoledronic acid (ZA), an activator of γ δ T cells, and a neutralizing antibody (AB) against γ δ T cells. We conducted a randomized complete block designed investigation for the effects of Haemonchus contortus (Hc) infection on Alpine wethers (young castrated male goats) to identify if metagenomic methods will provide strong evidence for diagnostics. Different tissues were collected from wethers and the microbiome compositions were identified. The relative proportion of microbial community members in the environments; the richness of the microbial community; and the evenness of distribution in microbial community members were determined. It was hypothesized that numerous parameters that include many data points will provide a more precise means to identify infection or health based on similarity to uninfected control data parameters. We found that samples did not sequence well, when multiplexed with high concentration libraries, giving taxonomic numbers that had residual and unmeasured confounding bias related to analysis or selection that define significance of OTUs in the tissue samples at the phylum or species level.

We enhanced the agro-hydrologic VegET model to include snow accumulation and melt processes and the separation of runoff into surface runoff and deep drainage. Driven by global weather datasets and parameterized by Land Surface Phenology (LSP), the enhanced VegET model was implemented in the cloud to simulate daily soil moisture (SM), actual evapotranspiration (ETa), and runoff (R) for the conterminous United States (CONUS) and the Greater Horn of Africa (GHA). Evaluation of the VegET model with independent data showed satisfactory performance, capturing the temporal variability of SM (Pearson correlation r: 0.22–0.97), snowpack (r: 0.86–0.88), ETa (r: 0.41–0.97), and spatial variability of R (r: 0.81–0.90). Absolute magnitudes showed some biases, indicating the need of calibrating the model for water budget analysis. The seasonal Landscape Water Requirement Satisfaction Index (L-WRSI) for CONUS and GHA showed realistic depictions of drought hazard extent and severity, indicating the usefulness of the L-WRSI for the convergence of evidence toolkit used by the Famine Early Warning System Network to monitor potential food insecurity conditions in different parts of the world. Using projected weather datasets and landcover-based LSP, the VegET model can be used not only for global monitoring of drought conditions, but also for evaluating scenarios on the effect of a changing climate and land cover on agriculture and water resources.

The importance of rare earth elements as the basis in the development of new technologies or the improvement of the used ones, made of a necessity its recovery, besides that from raw materials, from waste materials. In this recovery, Hydrometallurgy and its derivative Solvometallurgy, play a key role due to its operational characteristics, which are emphasized with the use of ionic liquids. The manuscript reviewed the most recent advances (2023 and 2024 years) about the use of ionic liquids in the unit operations (leaching and separation technologies) aimed to the recovery of these valuable and strategic metals. Moreover, a comprehensive review about the use of these chemicals in the development of advanced materials containing some of these rare earth elements is presented.

This work presents a nonlinear model predictive control scheme that challenges overcoming the obstacles holding back over decades to develop affordable autonomous control and monitoring systems applied in the large-scale industry. Among the numerous proposals in the literature, most do not consider the significant fluctuation of kinetic parameters in the reduced mathematical model ADM2, widely used for control and monitoring purposes. The prevalent cause, on a basis, is the lack of information caused by some dynamics and parameters that cannot be measured in real-time by reliable sensors. In addition, to make matters worse, those systems inherently act with nonlinear nature and have a high sensitiveness to uncontrollable inputs and perturbations. Therefore, to prevent these drawbacks, this work proposes a new methodology that reconstructs the lack of information from the non-measurable dynamics, concentration of bacterias, and the kinetic parameters related to reaction rates. Simulations results demonstrate the effectiveness of the methodology compared with traditional industrial control schemes.

This work presents a methodology that seeks to be a new standard in modeling identification in anaerobic digestion reactors. Because it is not possible to measure all variables with reliable and cost-efficient real-time methods, a specific structure composed of an asymptotic observer for the concentration of state variables; acidogenic and methanogenic bacterias, unlock the use of new types of raw sludges for industrial control and monitoring purposes. New yield parameters were included in the reduced anaerobic digestion model (ADM2) used as the core, precisely two terms in total alkalinity, to bring about the modeling of additional organic materials at inlet containing proteins or amino acids. The fermentation of these substances introduces ammonium, providing variations in the amount of alkalinity available inside the reaction. The new model is used to solve an optimization problem that calculates the parameters that best fit the dynamics of state variables with the same information taken on the experimental data. The adjustment process started with the genetic algorithm; however, to improve the performance, a novel method is proposed called step-ahead. Together, including the design of an asymptotic observer, numerical simulations demonstrate the strengths of the structure, which constitutes a significant step in paving the way further to implement feasible, cost-effective control and monitoring systems in the industry.

In a bid to resolve lingering problems in cosmology, more focus is being tilted towards cosmological models in which physical constants of nature are not necessarily real constants, but varying with cosmic time. In this paper we have study cosmology in nonlinear electrodynamics with the Newton's gravitational constant $G$ not a constant but vary in form of power-law of the scale factor of the universe. The evolution of the scale factor $a (t)$ is studied in this model which depends on nonlinear electrodynamics fine tuning term of $\alpha$. Then we check the stability of the model using the speed of sound.

In this paper we use the Mellin convolution theorem, which is related to Perron's formula. Also we introduce new explicit formulae for arithmetic function which generalize the explicit formulae of Weil for other arithmetic functions different from the Von-Mangoldt function.

Remote sensing datasets are increasingly being used to provide spatially explicit large scale evapotranspiration (ET) estimates. The focus of this study was to estimate and thematically map on a pixel-by-pixel basis, the actual evapotranspiration (ET_a) of the Wonji Shoa Sugarcane Estate using the Surface Energy Balance Algorithm for Land (SEBAL), Simplified Surface Energy Balance (SSEB) and Operational Simplified Surface Energy Balance (SSEBop) algorithms. The results obtained revealed that the ranges of the daily ETa estimated on January 25, February 26, September 06 and October 08, 2002 using SEBAL were 0.0 - 6.85, 0.0 – 9.36, 0.0 – 3.61, 0.0 – 6.83 mm/day; using SSEB 0.0 - 6.78, 0.0 – 7.81, 0.0 – 3.65, 0.0 – 6.46 mm/day, and SSEBop were 0.05 - 8.25, 0.0 – 8.82, 0.2 – 4.0, 0.0 – 7.40 mm/day, respectively. The Root Mean Square Error (RMSE) values between SSEB and SEBAL, SSEBop and SEBAL, and SSEB and SSEBop were 0.548, 0.548, and 0.99 for January 25, 2002; 0.739, 0.753, and 0.994 for February 26, 2002;0.847, 0.846, and 0.999 for September 06, 2002; 0.573, 0.573, and 1.00 for October 08, 2002, respectively. The standard deviation of ET_a over the sugarcane estate showed high spatio-temporal variability perhaps due to soil moisture variability and surface cover. The three algorithm results showed that well watered sugarcane fields in the mid-season growing stage of the crop had higher ET_a values compared with the other dry agricultural fields confirming that they consumptively use more water. Generally during the dry season, ET_a is limited to water surplus areas only and in wet season, ET_a was high throughout the entire sugarcane estate. The evaporation fraction (ETrF) results also followed the same pattern as the daily ET_a over the sugarcane estate. The total crop and irrigation water requirement and effective rainfall estimated using the Cropwat model were 2468.8, 2061.6 and 423.8 mm/yr for January 2001 planted and 2281.9, 1851.0 and 437.8 mm/yr for March 2001 planted sugarcanes, respectively. The mean annual ET_a estimated for the whole estate were 107 Mm³, 140 Mm³, and 178 Mm³ using SEBAL, SSEB, and SSEBop, respectively. Even though the algorithms should be validated through field observation, they have potential to be used for effective estimation of ET in the sugarcane estate.

This work presents the mathematical framework of the Second-Order Comprehensive Adjoint Sensitivity Analysis Methodology for Response-Coupled Forward/Adjoint Linear Systems (abbreviated as “2nd-CASAM-L”), which enables the most efficient computation of exactly obtained mathematical expressions of first- and second-order sensitivities of a generic system response with respect to functions (“features”) of model parameters. Subsequently, the first- and second-order sensitivities with respect to the model’s uncertain parameters, boundaries, and internal interfaces are obtained analytically and exactly, without needing large-scale computations. Within the 2nd-FASAM-L methodology, the number of large-scale computations is proportional to the number of model features (defined as functions of model parameters), as opposed to being proportional to the number of model parameters, which are considerably more than the number of features, being incomparably more efficient and more accurate than any other methods (statistical, finite differences, etc.) for computing exact expressions of response sensitivities (of any order) with respect to the model’s features and/or primary uncertain parameters, boundaries, and internal interfaces. The application of the 2nd-CASAM-L methodology is illustrated using a simplified energy-dependent neutron transport model of fundamental significance in nuclear reactor physics.

We perform new measurements of the expansion rate and the sound horizon at the end of the baryon decoupling and derive constraints on cosmic key parameters in the framework of the ΛCDM model, flat wCDM model, the ΛCDM+ΩK model and the phenomenological emergent dark energy (PEDE) model. We keep rd and H0 completely free and use the recent dark energy spectroscopic instrument (DESI) Year 1 and dark energy survey (DES) Year 6 BAO measurements in the effective redshift range 0.3&lt;z&lt;2.33 combined with the compressed form of the Pantheon sample of Type Ia supernovae, the latest 33 observational H(z) measurements based on the differential age method, and the recent H0 measurement from SH0ES 2022 as an additional Gaussian prior. Combining BAO data with the observational H(z) measurements, and the Pantheon SNe Ia data, we get H0=69.65±1.07 km s−1 Mpc−1, rd=147.71±2.18 Mpc in ΛCDM model, H0=70.06±1.07 km s−1 Mpc−1, rd=147.39±2.50 Mpc in PEDE model. The spatial curvature is Ωk=0.025±0.026 and the dark energy equation of state is w=−1.016±0.056, consistent with a cosmological constant. We apply the Akaike information and the Bayesian information criterion test to compare the four models, and see that PEDE model performs better.

In recent years, advancements in brain science and neuroscience have significantly influenced the field of computer science, particularly in the domain of reinforcement learning (RL). Drawing insights from neurobiology and neuropsychology, researchers have leveraged these findings to develop novel mechanisms for understanding intelligent decision-making processes in the brain. Concurrently, the emergence of quantum computing has opened new frontiers in artificial intelligence, leading to the development of quantum machine learning (QML). This study introduces a novel model that integrates Quantum Spiking Neural Networks (QSNN) and Quantum Long Short-Term Memory (QLSTM) architectures, inspired by the complex workings of the human brain. Specifically designed for reinforcement learning tasks in energy-efficient environments, our approach progresses through two distinct stages mirroring sensory and memory systems. In the initial stage, analogous to the brain’s hypothalamus, low-level information is extracted to emulate sensory data processing patterns. Subsequently, resembling the hippocampus, this information is processed at a higher level, capturing and memorizing correlated patterns. We conduct a comparative analysis of our model against existing quantum models such as Quantum Neural Networks and their classical counterparts, elucidating its unique contributions. Through empirical results, we aim to underscore the effectiveness of our approach in optimizing energy consumption in practical scenarios.

This paper presents a novel approach to power management techniques in energy storage system (ESS) interoperability with the energy power system (EPS) by inserting a SCADA controlled directional protection relay for improving the mode switching sequence. According with latest European standards, all necessary measures for re-synchronization and reconnection for health work of the system must be taken. The proposed approach intends to improve the “interface” between storage systems and electric power grid by using a directional relay which provides interoperability improvement by automatic recognizing and differentiating the switching sequence of the mode of operation from the fault mode. Simulated results from a small scale electrical generating system are provided. The results demonstrate that the proposed power management solution is technically ideal to achieve high quality energy while retaining the stability of the power grid network. The interoperability of PHS systems integrated with the electric power grid usually leads to perturbations in terms of frequency of the generated voltage, and for improving it we designed an automatic treating and re-connecting software module. This work regards the importance of producing electricity from green and renewable energy sources, while retaining the stability and reliability of the power grid. ESS systems are widely used to help balancing of intermittent forms of load demand on the electrical power grid at specific key moments. In this article, the pumped hydro storage (PHS) technologies are proposed as an economical way to utilize smoothly the off-peak energy or surplus energy, by pumping water to a reservoir at a higher level. During peak load periods, the stored water is discharged through the reversible pump-turbine to generate electricity to meet the peak demand controlled by designed SCADA application.

Autonomous weapons systems (AWS), sometimes referred to as “killer robots”, are receiving evermore attention, both in public discourse as well as by scholars and policymakers. Much of this interest is connected with emerging ethical and legal problems linked to increasing autonomy in weapons systems, but there is a general underappreciation for the ways in which existing law might impact on these new technologies. In this paper, we argue that as AWS become more sophisticated and increasingly more capable than flesh-and-blood soldiers, it will increasingly be the case that such soldiers are “in the power” of those AWS which fight against them. This implies that such soldiers ought to be considered hors de combat, and not targeted. In arguing for this point, we draw out a broader conclusion regarding hors de combat status, namely that it must be viewed contextually, with close reference to the capabilities of combatants on both sides of any discreet engagement. Given this point, and the fact that AWS may come in many shapes and sizes, and can be made for many different missions, we argue that each particular AWS will likely need its own standard for when enemy soldiers are deemed hors de combat. We conclude by examining how these nuanced views of hors de combat status might impact on meaningful human control of AWS.

Purpose: Expanded carrier screening (ECS) informs couples of their risk of having offspring affected by certain genetic conditions. Limited data exists assessing the actions and reproductive outcomes of at-risk couples (ARCs). We describe the impact of ECS on planned and actual pregnancy management in the largest sample of ARCs studied to date. Methods: Couples who elected ECS and were found to be at high risk of having a pregnancy affected by at least one of 176 genetic conditions were invited to complete a survey about their actions and pregnancy management. Results: Three hundred ninety-one ARCs completed the survey. Among those screened before becoming pregnant, 77% planned or pursued actions to avoid having affected offspring. Among those screened during pregnancy, 37% elected prenatal diagnostic testing (PNDx) for that pregnancy. In subsequent pregnancies that occurred in both the preconception and prenatal screening groups, PNDx was pursued in 29%. The decision to decline PNDx was most frequently based on the fear of procedure-related miscarriage, as well as the belief that termination would not be pursued in the event of a positive diagnosis. Conclusions: ECS results impacted couples’ reproductive decision-making and led to altered pregnancy management that effectively eliminates the risk of having affected offspring.

The boosted interest in the use of rare earth elements (REEs) in modern technologies had also increase the necessity of their recovery from various sources, including raw materials and wastes. Though Hydrometallurgy plays a key role in these recovery processes, some drawbacks (apparent or not) of these processes, had led to the development of a more environmental friendship subclass named Solvometallurgy, in which non-aqueous solvents substituted to the aqueous media of the hydrometallurgical processing. The non-aqueous solvents chosen for these usages are, besides ionic liquids (ILs), the so-named Deep Eutectic Solvents (DEEs). The utilization of DEEs included the leaching of REEs from the different sources containing them, and also in the separation-purification steps necessary for the yielding of these elements, normally as oxides or salts, in the most purified form. This work reviewed the most recent literature (2023 year) about the utilization of deep eutectic solvents in the recovery of REEs from various sources, and in the coupling of these two (DESs and REEs) to derived compounds to be used in other fields.

Albert Einstein, shortly after publishing his General Relativity Theory (GRT) applied it to the entire universe in a paper of 1917. Einstein assumed that such a universe was static in time and possessed a uniform distribution of matter on the largest scales, obtaining a static and finite universe of spherical spatial curvature of radius R. Although this model was refuted by Edwin Hubble's discovery of the expansion of the universe, it is still often studied as a theoretical framework for some problems, such as the twin paradox. This paper will show that Einstein's static universe model leads to a privileged frame of reference, so that any observer moving at the speed v will be able to measure speeds of light other than c depending on the direction of beam transmission. The above will refute the validity of the application to this closed and static universe of the Special Relativity Theory (SRT) proposed by Einstein in 1905 in his article . In addition, a new synchronization convention and new coordinate transformations will be deduced, the "generic" transformations, which will replace those of Lorentz. Finally, the twin paradox in this universe will be solved by making use of them.

This paper proposes a novel data processing framework dedicated to bedload monitoring in underwater environments. After calibration, by integration the total energy in the nominal bandwidth, the proposed experimental setup is able to accurately measure the mass of individual sediments hitting the aluminum plate. This require a priori knowledge of the vibration trasients in order to match a predefined dictionary. Based on unsupervised hierarchical agglomeration of complex vibration spectra, the proposed algorithms allow to accurately localize the transients corresponding to the shocks created by sediment impacts on a steel plate.

The Independent Component Analysis (ICA) has been recently introduced as a reliable alternative to identify canonical scattering mechanisms within Polarimetric Synthetic Aperture Radar (PolSAR) images. This manuscript addresses two important aspects when applying such methods on real data, namely speckle filtering and statistical classification with ICA. A novel PolSAR data processing framework is introduced by adjusting the Lee's sigma filter to the particular nature of the Touzi's polarimetric decomposition. In its current form, it allows the use of the ICA mixing matrix in the derived speckle filter. An extension of the Fromont at al. iterative segmentation is introduced, equally. This proposed framework is tested using P band airborne PolSAR data acquired for the ESA campaign TropiSAR campaign.

The paper presents the results of the theoretical and practical research on developing the infrastructure for assessment of overall risk (explosion / occupational / terrorist attack) associated with unwanted events such as major accidents that can occur at explosive storehouses for civilian use. The scientific research outlined in this article was carried out within the Nucleu Project PN 16 43 02 15 - “Research on increasing safety levels at technical facilities for storage of explosives for civil use”.

Parallel decompositions have proved to be powerful tools for the analysis and interpretation of the physical information provided by Mueller matrices experimentally obtained. In this work, the procedure for the so-called arbitrary decomposition of Mueller matrices is validated through its application to a set of representative experimentally determined Mueller matrices. The covariance and passivity criteria required for the physical realizability of the Mueller matrices involved in the parallel decompositions are integrated in the procedure, which ensures the physical consistency of the results presented.

The purpose of this study is to compare IVC Celect and ALN filters in regard to their efficacy, retrievability, and 1-year follow-up after retrieval. Materials and Methods: This is a prospective randomized study, conducted in three centers between April 2020 and May 2021. A total of 115 participants were randomized, of which 15 participants were excluded for various reasons. Each group of 50 participants was finally assigned a type of filter (Celect n= 50 and ALN= 50). Tilt angles at placement and retrieval together with rates of overall filter retrieval, complications, complex retrieval, and clinical follow-up at 12 months were compared. Results: One hundred participants (59 men and 41 women) were included. The mean age was 62.4±13.3 with no significant differences between both groups (p 0.503). The mean of dwelling time was 44.7±93 days. (p 0.520) Filter retrieval was successful in all participants (100%). The main complication in CT prior to removal was inclination > 15º (31%) and filter tip embedment (16%). No significant differences were observed in the type of retrieval (standard or complex) between both filters (p 0.24); however, fluoroscopy time was significantly longer in the complex removal of the Celect filter 29.1±12 min vs 17.5±10.3 (p 0.005). After one year, no recurrent pulmonary embolism was observed in both types of filters. Conclusion: The ALN filter had a significantly lower rate of tip and filter tip embedding with no differences in complexity or removal success rate. There were significant differences in the fluoroscopy time consumed for standard and complex retrievals between both filters with less time in the ALN filter

A reduced order model is developed to monitor aeroengines condition (defining their degradation from a baseline state) in real-time, by using data collected in specific sensors. This reduced model is constructed by applying higher order singular value decomposition plus interpolation to appropriate data, organized in tensor form. Such data are obtained using a detailed engine model that takes the engine physics into account. Thus, the method synergically combines the advantages of data-driven (fast online operation) and model-based (the engine physics is accounted for) condition monitoring methods. Using this reduced order model as surrogate of the engine model, two gradient-like condition monitoring tools are constructed. The first tool is extremely fast and able to precisely compute `on the fly’ the turbine inlet temperature, which is a paramount parameter for the engine performance, operation, and maintenance, and can only be roughly estimated by the engine instrumentation in civil aviation. The second tool is not so fast (but still reasonably inexpensive) and precisely computes both, the engine degradation and the turbine inlet temperature at which sensors data have been acquired. These tools are robust in connection with random noise added to the sensors data and can be straight forwardly applied to other mechanical systems.

Keywords: Oral health, diabetes, periodontal disease, caries, periodontitis.

Lead-210 from natural atmospheric fallout is widely used in multidisciplinary studies to date recent sediments. Some of the ²¹⁰Pb-based dating models can produce historical records of sediment accumulation rates (SAR) and initial activity concentrations ( ). The former have been profusely used to track past changes in the sedimentary conditions. Both physical magnitudes are differently affected by model errors (those arising for the partial or null accomplishment of some model assumptions). This work is aimed at assessing the effects on SAR and of model errors in the CRS, CS, PLUM and TERESA dating models, due to random variability in ²¹⁰Pb fluxes, which is a usual sedimentary condition. Synthetic cores are used as virtual laboratories for this goal. Independently of the model choice, SARs are largely affected by model errors, resulting in some large and spurious deviations from the true values. This questions their general use for tracking past environmental changes. are less sensitive to model errors and their trends of change with time may reflect real changes in sedimentary conditions, as it is shown with some real cores from varved sediments.

In an analogous manner as occurred during the development of a connected metabolism that at some point reached characteristics associated with what is called ‘life’ ―due mainly to a catalytic closure phenomenon when chemicals started to autocatalyze themselves forming a closed web of chemical reactions― it is here proposed that cognition and consciousness (or features associated with them) arose as a consequence of another type of closure within the nervous system, the brain especially. Proper brain function requires an efficient web of connections and once certain complexity is attained due to the number and coordinated activities of the brain cell networks, the emergent properties of cognition and consciousness take place. Seeking to identify main features of the nervous system organization for optimal function, it is here proposed that while catalytic closure yielded life, neuroglial closure produced cognition/consciousness.

Though nowadays germanium do not reach the range of popularity than other metals, i.e. rare earth elements, its utility in target industries makes of it also a strategic metal. Though germanium can be find in a series of raw materials, the principal source for its recovery is from secondary wastes of the zinc industry, and also, the recycle of germanium-bearing waste materials is becoming of interest. In this recovery, Hydrometallurgy is performing a key role to the successful achievement of this goal. The present work reviews the most recent applications (2023 and 2024 years) of hydrometallurgical operations on the recovery of germanium from different solid and liquid sources.

The objective of this work was to evaluate the blending and grinding influence over the nutritional, sensorial and sustainable aspects of coffee. To do so, a systematic review of the literature was accomplished. The database for the selection of relevant papers was the Portal de Periódicos da Capes, with remote access via CAFe. For the elaboration of the research, a chronological criterion with period restriction was used, considering the period between 2008-2022, to access all possible works related to the theme of this work. The following terms were used: blending; grinding; coffee; nutrition-al; sensorial; sustainability. To filter the searches, the association of these terms was also used by means of links and word associations. In the terminology, the Boolean operator AND was used to interconnect the terms used. Roasting degree, grinding, and amount of each coffee species impacts the nutritional and sensorial aspects of coffee. And the determination of each blending influences the sustainability of the environment, economic and social aspects of the coffee chain.

Humanity, culture, societal development and language issues are mutually reinforcing much as they are intricately interwoven in a non-ceasing dynamic interrelationships within the matrix defined by language standardization or development, acquisition and use that mostly take up central place as unifying and propelling forces in language discourse. Within the confines of globalization which is neither homogenization nor convergence; but the beginning of drawing on the strength of indigenous capabilities to create knowledge ecology that would enliven socio-economic and scientific development of the world in far reaching interconnectivities and relationships across every clime, issues pertaining to language development, acquisition and use become imperative. It is against this background that this paper examines the development/standardization, acquisition and use of Esan language as one of several Nigerian indigenous languages to promote scientific and technological development through knowledge creation, preservation and dissemination. The obsession of using western model and epistemological outlook to achieve appropriate scientific and technological development to the utter neglect of home grown and culturally distilled efforts were also examined. In the light of the dare consequences and the harsh conditions globalization imposes on developing nations, this paper highlights standardization and use of indigenous languages in chatting appropriate trajectory for effectual developmental efforts in fast shrinking contemporary world.

This paper presents a new methodology that provides the analysis of surface texture changes in areas adjacent to the volcano and its impact product of volcanic activity. To do this, algorithms from digital image processing such as the co-occurrence matrix and the wavelet transform are used. These methods are working on images taken by the Landsat satellite platform sensor 5 TM and Landsat 7 ETM + sensor, and implemented with the purpose of evaluating superficial changes that can warn of surface movements of the volcano. The results were evaluated by similarity metrics for grayscale images, and validated in two different scenarios that have the same type of eruption, but differ, essentially, in climate and vegetation. Finally, the proposed algorithm is presented, setting the parameters and constraints for implementation and use.

This document summarizes the evidence currently available about the effects of the anesthetic agents and techniques used in primary cancer surgery and long-term oncologic outcomes, and the biomolecular mechanisms involved in their interaction..

The development of biofuels and biodiesel industry specifically, has resulted in the generation of large amounts of glycerol as a surplus. The conversion of glycerol, into chemicals with indus-trial interest, through anaerobic fermentation using E. coli as a biocatalyst is an attractive alter-native to improve economic performance in the biodiesel industry, for example through the bi-otransformation of residual glycerol into ethanol. For 2019, the size of the global ethanol market was valued at $ 89.1 billion US dollar. Biodiesel can be produced from several materials like rapeseed, palm, soya, corn, palm kernel, frying oil or olive-pomace oil (OPO). The last, can be extracted from alperujo, byproduct of olive oil process. However, olive-pomace oil converting into biodiesel is not enough established to achieve a global olive-oil/biodiesel derived process with minimized waste generation. Traditionally biodiesel production process produces an equivalent of 10% by mass of glycerol as a waste or by-product. This work explores the conver-sion of residual glycerol into chemicals like ethanol and hydrogen with a focus on projecting raw material potential availability from OPO, contributing to the promotion of the use of biofu-els and biodegradable compounds.

Player’s performance in an intense sport such as basketball is known to be related to attributes like speed, agility, and power. This study presents a comparative analysis of associations between anthropometric assessment and physical performance in different age-group elite youth basketball players, while simultaneously identifying the predictors for speed and agility in these players. U14 (n=44), U15 (n=45) and U16 (n=51) players were tested for anthropometry, lower body power, speed, and agility. U16 players were found to be taller, heavier, more muscular than U14 and U15 players. Also, the U16 group showed better performance in all performance tests. Age had a significant positive correlation with countermovement (CMJ) and drop jump (DJ) performance in U14 players, and a significant negative correlation with 10m and 20m sprint times in U15 group. CMJ and DJ emerged as the most significant predictors for sprint and agility variables, respectively. Body fat percentage was found to be a significant predictor for the speed and agility tests in all age groups, but a negative lower-body power predictor. Therefore, besides all sport-specific and fitness tests, it is essential to place emphasis on the percentage of body fat when designing players’ individualized training programs, and during team selection.

Background: As noninvasive prenatal screening usage grows in the general obstetrics setting, proper patient education on the screen’s benefits and limitations is needed. Objective: Describe the use of a technology platform designed for large-scale dissemination of noninvasive prenatal screening information and results. Study Design: The technology platform functioned as follows: Patients were emailed a link to an noninvasive prenatal screening general-education video upon laboratory receipt of a test requisition. Providers were then notified upon availability of patients’ results. If noninvasive prenatal screening results were negative, the patient was sent an automated email with instructions to access results through a secure portal where she could watch tailored informational videos, request “on-demand” or scheduled genetic counseling, or decline any further services. If genetic counseling was elected, a summary of the session was sent to the ordering provider and patient upon completion. If noninvasive prenatal screening results were positive, either the ordering provider or a board-certified genetic counselor contacted the patient directly to communicate test results and provide counseling. The number and type of results issued through the platform, the number and type of genetic counseling consultations completed, and factors associated with requesting laboratory-delivered genetic counseling were tracked and analyzed for a 39-month period. Results: Over the study period, 67,122 noninvasive prenatal screening results were issued through the platform, and 4,673 patients elected genetic counseling consultations; 95.2% (n=4,450) of consultations were for patients receiving negative results. Over 70% (n= 3,370) of consultations were on-demand rather than scheduled. Median consultation time was 14 minutes for positive results and six minutes for negative results. A positive screen, advanced maternal age, family history, previous history of a pregnancy with a chromosomal abnormality, and other high-risk pregnancy were associated with the greatest odds of electing laboratory-delivered genetic counseling. Conclusions: By combining web education, automated notifications, and genetic counseling, we implemented a service that effectively facilitates results disclosure for ordering providers. These data demonstrate the capability to deliver noninvasive prenatal screening results, education, and counseling—congruent with management guidelines—to a large population, which is imperative to quality care as uptake increases.

The Autopoiesis and Cognition Theory (ACT), by Maturana and Varela, based on the notions of Biological Closure and Structural Coupling, is a well-known theory on how to understand biological organization [1, 2, 3]. Although, for example, the Free Energy Principle framework evokes some entailments of autopoiesis in a more formal setting [4, 5]; and ACT has been used in many fields, its impact has been restricted because it lacks quantitative analysis. Here we present a theoretical framework grounded in accepted and well-developed ideas from Mathematics and Physics which advance the understanding of the Principles of Biological Organization under the guidance of Biological Closure and Structural Coupling. The disciplines of Differential Geometry/Topology, Mechanics and Complex Dynamical Systems provide a powerful, elegant, and well-established body of knowledge to support our Biological Organization Principles (BOP) framework. In particular, Stochastic Mechanics and KAM theory (from Kolmogorov, Arnold and Moser theorem) allow us to develop, using the notions of Biological Closure and Structural Coupling, a central core of BOP termed Dynamical Closure Mechanism. Under the proposed framework, a wide variety of bio- logical phenomena can be understood, shedding new light on biological explanations. However, an understanding of biological organization may require the re-evaluation of dogmas on how we think on biology as it seems inescapable that what is needed is an integration of analysis and notions derived from mathematics, physics, and biology to generate a new landscape of ideas.

The latest World Atlas of Desertification represents a turning point in the diagnosis of desertification. While it forgoes desertification mapping due to the intrinsic complexity of the phenomenon and the impossibility of measuring it using a single indicator, it introduces the Convergence of Evidence paradigm, which identifies socioeconomic and biophysical variables whose behavior allows pointing out those areas prone to desertification. The Spanish National Action Program Against Desertification (PAND), back to 2008, already implemented a similar approach to identify five “desertification landscapes” within Spain using both socio-economic and climatic information. The PAND was not only pioneering but also, unfortunately, accurate. Desertification in Spain has continued to worsen and the first two decades of the 21st century have consolidated an agri-food model whose dynamics have exacerbated the desertification processes identified in the PAND. Despite its scientific value, the PAND lacked a proper action plan and was completely detached from the diagnosis. As a result the diagnosis it provided was not followed by effective actions to halt desertification in Spain. The Spanish Government's recent declaration of climate and environmental emergency requires a new strategy to combat desertification. This commitment is an excellent opportunity to update the diagnosis of the situation and, more crucially, to unify the different desertification sectoral policies and actions under a single front. We provide here elements for a roadmap to be designed around the pressures, impacts, and drivers that define today's Spanish desertification landscapes to manage them effectively and avoid their further degradation.

This paper presents performed Ansys numerical simulation on WindFloat structures. It contributes to the methodology of calculation based on CFD instruments to study the movements of the waves on semi-submersible stationary structures and highlights the importance of using RAO functions. RAO numerical approach developed can be applied to design semisubmersible WindFloat structures in order to fulfill essential requirements regarding operational safety and design. Numerical methodology was designed in accordance marine loads and the I.T.T.C. recommendations. The numerical RAO results for regular wave movements include many elements for the semi-submergible structure. Close results to open sea operation can be achieved by constant improvement in numerical simulation methodologies. The work opens the way for further hydrodynamic development on irregular waves for realistic hydrodynamic and structural response of the actual semi-submersibles at sea. The results demonstrate the accuracy of RAO function approach for specific WindFloat in Jonswap spectrum.

High efficiency and safety are critical factors in ensuring optimal performance and reliability of systems and equipment across various industries. Fault Monitoring (FM) techniques play a pivotal role in this regard by continuously monitoring system performance and identifying the presence of faults or abnormalities. However, traditional FM methods face limitations in fully capturing the complex interactions within a system and providing real-time monitoring capabilities. To overcome these challenges, Digital Twin (DT) technology has emerged as a promising solution to enhance existing FM practices. By creating a virtual replica or digital copy of a physical equipment or system, DT offers the potential to revolutionize fault monitoring approaches. This paper aims to explore and discuss the diverse range of predictive methods utilized in DT and their implementations in FM across industries. Furthermore, it will showcase successful implementations of DT in FM across a wide array of industries, including manufacturing, energy, transportation, and healthcare The utilization of DT in FM enables a comprehensive understanding of system behavior and performance by leveraging real-time data, advanced analytics, and machine learning algorithms. By integrating physical and virtual components, DT facilitates the monitoring and prediction of faults, providing valuable insights into the system’s health and enabling proactive maintenance and decision-making.

Deep brain stimulation (DBS) is an effective and safe medical treatment that improves the lives of patients with a wide range of neurological and psychiatric diseases, and has been consolidated as a first-line tool in the last two decades. Closed loop deep brain stimulation (CLDBS) pushes this tool further by automatically adjusting the stimulation parameters to the brain response in real-time. This paper presents a CLDBS with 2 stimulation channels and 2 acquisition channels. Each channel has a low-noise amplifier (LNA) buffer in differential configuration to eliminate the DC signal component of the input. Energy management is efficiently done by the control and communication unit. The battery supports almost 9 hours with both the acquisition and stimulation circuits active. If only the stimulation circuit is used as an Open Loop DBS (OLDBS), the battery can hold sufficient voltage for 24 hours of operation. The whole system is low-cost and portable and therefore it could be used as a wearable.

This work continues the review and illustrative application to energy systems of the “Fourth-Order Best-Estimate Results with Reduced Uncertainties Predictive Modeling” (4th-BERRU-PM) methodology. The 4th-BERRU-PM methodology uses the Maximum Entropy (MaxEnt) principle to incorporate fourth-order experimental and computational information, in-cluding fourth (and higher) order sensitivities of computed model responses with respect to model parameters. The 4th-BERRU-PM methodology yields the fourth-order MaxEnt posterior distribution of experimentally measured and computed model responses and parameters, in the combined phase-space of model responses and parameters. The 4th-BERRU-PM methodology encompasses fourth-order sensitivity analysis (SA) and uncertainty quantification (UQ), which were reviewed in the accompanying work (Part 1), as well as fourth-order data assimilation (DA) and model calibration (MC) capabilities, which will be reviewed and illustrated in this work (Part 2). The applicability of the 4th-BERRU-PM methodology to energy systems is illustrated by using the Polyethylene-Reflected Plutonium (acronym: PERP) OECD/NEA reactor physics benchmark, which is modeled using the linear neutron transport Boltzmann equation, involving 21976 im-precisely known parameters. This benchmark is representative of “large-scale computations” such as those involved in the modeling of energy systems. The result (“response”) of interest for the PERP benchmark is the leakage of neutrons through the outer surface of this spherical benchmark, which can be computed numerically and measured experimentally. The impact of the high-order sensitivities of the response with respect to the PERP model parameters is quantified for “high-precision” parameters (2% standard deviations) and “medium-precision” parameters (5% standard deviations). Analyzing the best-estimate results with reduced uncertainties for the 1st- through 4th-order moments (mean values, covariance, skewness, and kurtosis) produced by the 4th-BERRU-PM methodology for the PERP benchmark indicates that, even for systems mod-eled by linear equations (e.g., the PERP benchmark), retaining only first-order sensitivities is insufficient for reliable predictive modeling (including SA, UQ, DA, MC). At least second-order sensitivities should be retained in order to obtain reliable predictions.

: BACKGROUND: The prevalence of smoking among students is a growing concern, particular-ly among medical students. Being associated with stress, competitiveness, and various social in-fluences, smoking can have detrimental effects on self-esteem and self-efficacy and may create a vicious cycle that may contribute to students’ well-being and academic performance out-comes.METHODS: A cross-sectional study on 456 medical students was conducted via an online survey using structured questionnaires on socio-demographic characteristics, smoking habits, nicotine dependence, self-esteem, and self-efficacy. RESULTS: The prevalence of smoking was 31.1% The scores of self-esteem and self-efficacy were positively correlated with smoking habits (W1=0.957, W2=0.975, P<0.05). Students presented rather low smoking addiction with male stu-dents having slightly higher scores than female students on self-esteem and self-efficacy, mili-tary students had higher self-esteem scores than civilians with physical activity having a posi-tive correlation with non-smoking behavior. CONCLUSION: According to our results, self-esteem and self-efficacy were slightly positively correlated with smoking habits. Furthermore, there was no statistically significant association between other social factors and smoking. Our results may develop a theoretical basis for medical students’ psychological variables studying for further implementation of university educational programs and preventive interventions em-powering students towards an overall better quality of life, addressing, among others, smoking behaviors.

Forest plantations have a large potential for carbon sequestration, playing an important role in the global carbon cycle. However, despite the huge amount of research carried out worldwide, the absolute contribution of industrial forest plantations is still incomplete for some parts of the world. To contribute to bridge this gap, we calculated the amount of C stock in three fast growing forest species in Chile. Relevant C pools (above-ground and below-ground biomass, forest floor, and soil) were considered for this analysis. Across the industrial plantation forests of Chile, carbon accumulated in the above-ground biomass was 181–212 Mg · ha−1 for Pinus radiata, 147–180 Mg · ha−1 for Eucalyptus nitens, and 95–117 Mg · ha−1 for Eucalyptus globulus (age 20–24 years for P.radiata and 10–14 years for Eucalyptus). Our results agree with other studies showing that 30%–50% of the total C stock is stored in the soil. Total C stocks were for 343 Mg · ha−1 for P.radiata, 352 Mg · ha−1 for E.nitens, and 254 Mg · ha−1 for E. gloubulus, also at the end of a typical rotation. The carbon pool in the forest floor was found to be significantly lower (less than 4% of the total) when compared to the other pools and showed large spatial variability. We conclude that industrial forest plantations are a valuable tool to reduce atmospheric CO2 and mitigate climate change. Given the contribution of soils to total carbon stocks, special attention should be paid to forest management activities that affect the soil organic carbon pool.

In the former mining district of La Carolina (southern Spain), waste materials were accumulated without first waterproofing the substrate. Additionally, these mining dams were abandoned without any type of restoration, conditions that present a significant risk of contaminating the surrounding soils and waters. Prior to carry out the necessary works for isolating these residues, morphological characterization of the contact with the base substrate is needed. For that purpose, in recent years, different indirect study techniques have been used, among which electrical to-mography stands out. In this work, a less common geophysical technique, magnetometry, both in its magnetic and gra-diometric modalities, is used as an alternative method to analyse the geometry and structure of a mining dam. The results obtained with this methodology are compared with the results provided by electrical techniques, as well as with direct data from mechanical surveys and aerial photo-graphs prior to waste deposition. The magnetic anomaly curves obtained with geometric models generated with the Mag2dc program were also analysed. This comparative study shows the use-fulness of magnetic prospecting in characterizing the base geometry of these mining structures and therefore the interest in its application to environmental characterization studies.

The solvent extraction of gold(III) by undiluted 2-ethylhexanol or dissolved in toluene from HCl solution has been investigated. The numerical analysis of gold distribution data suggests the formation of HAuCl4·L and HAuCl4·2L (L= 2-ethylhexanol) species in the organic phase with formation constants K11= 38 and K12= 309, respectively. The results derived from gold(III) distribution have been implemented in a solid-supported liquid membrane system. The influence of several variables on gold transport was considered: feed and receiving phases stirring speeds, HCl and gold concentrations in the feed phase and carrier concentration in the membrane phase as well as the presence of base metals (Fe,Cu,Ni) and PGMs in the feed phase. Also, diffusional resistances to mass transfer are estimated. Gold is recovered as zero valent nanoparticles.

In this study, a critical review was carried out using the Web of ScienceTM Core Collection database to analyse the scientific literature published to date to identify lines of research and future perspectives on the presence of chemical pollutants in beer brewing. Beer is one of the world's most popular drinks and the most consumed alcoholic beverage. However, a widespread challenge with potential implications for human and animal health is the presence of physical, chemical and/or microbiological contaminants in beer. Biogenic amines, heavy metals, mycotoxins, nitrosamines, pesticides, acrylamide, phthalates, bisphenols, microplastics and, to a lesser extent, hydrocarbons (aliphatic chlorinated and polycyclic aromatic), carbonyls, furan-derivatives, polychlorinated biphenyls and trihalomethanes are the main chemical pollutants found during the beer brewing process. Pollution sources include raw materials, technological process steps, the brewery environment and packaging materials. Different chemical pollutants have been found during the beer brewing process, from barley to beer. Brewing steps such as steeping, kilning, mashing, boiling, fermentation and clarification are critical in reducing the levels of many of these pollutants. As a result, their residual levels are usually below the maximum levels allowed by international regulations.

The concept of “hyperferritinemic syndrome” defines a complex pathophysiological and clinical entity, characterized by a systemic hyperinflammatory state, generally associated with elevated levels of proinflammatory cytokines (hypercytokinemia) and high serum levels of ferritin (hyperferritinemia), traditionally recognized as an iron-binding plasma protein involved in the storage of iron in a biologically available form for different physiological cellular processes. Recent studies have shown that ferritin has other important functions as well, operating both as a proinflammatory mediator and as a immunosupressive agent, its elevated levels in the serum being detected in various conditions associated with inflammatory states, such as infectious diseases, autoimmune and autoinflammatory disorders and, in some cases, in malignancies. Catastrophic antiphospholipid syndrome (cAPS), systemic juvenile idiopathic arthritis (sJIA) and adult-onset Still’s disease (AOSD) and acquired forms of hemophagocytic lymphohistiocytosis (HLH), which includes macrophage activation syndrome (MAS), have been associated with hyperinflammatory states and dramatic elevations of serum ferritin, generating hyperferritinemic syndromes. Severe forms of coronavirus disease-2019 (COVID-19), in which MAS may frequently develop, has also been linked to the development of a hyperferritinemic syndrome. This review offers several insights into the physiological and pathophysiological roles of ferritin in several (hyper-)inflammatory diseases, but also into the causal entities, the underlying pathophysiological mechanisms, clinical manifestations and diagnostic features of somewhat obscure, yet potentially fatal pathological conditions, reunited under the concept of hyperferritinemic syndromes.

Projected future sea level rise and marine storminess is a serious threat for beaches as they induce beach flooding and erosion. Among other factors, wave runup play an important role in beach evolution and must be robustly assessed. However, little attention has been paid to the uncertainties associated to its characterization and how do they compare to other sources of uncertainty. As a first step towards this goal, we have quantified the impact of several sources of error in the estimation of wave runup on sandy beaches. Understanding what factors are more influential in the quality of the results will help to determine the main sources of uncertainty in beach flooding projections. To reach that goal, a calibrated state-of-the-art numerical modelling system has been setup for two beaches in the Mallorca islands (NW Mediterranean). The system has been forced with the best available information of nearshore incoming waves and has been validated against observations to define the benchmark quality. To determine the key factors affecting the quality of the system’s results, different systems configurations have been tested with different degrees of complexity.Our results show that using the most sophisticated modelling system with the best information on boundary conditions, bottom bathymetry, and submerged vegetation leads to a swash RMSE comparable to the standard deviation of the observed swash. We have also found that the choice of lateral boundary conditions (i.e., source of information for the incoming waves) can double the RMSE and induce large biases. Our results also show that using a simple empirical approach usually underestimates the wave runup. However, in locations with vegetated seabed there is a compensation error, and the empirical approach can lead to acceptable results if forced by nearshore waves. In addition, we have compared the error estimates obtained with uncertainties associated to projected sea level rise. Our findings suggest that the uncertainty associated with wave runup modelling should be considered in the assessment of the total uncertainty of future beach flooding, since the analysis performed indicates that this uncertainty can account for between 16% to 60% of the uncertainties linked to mean sea level projections.

This paper proposes a definition of fractional line integral, generalising the concept of fractional definite integral. The proposal replicates the properties of the classic definite integral, namely the fundamental theorem of integral calculus. It is based on the concept of fractional anti-derivative used to generalise the Barrow formula. To define the fractional line integrals the Gr\"unwald-Letnikov and Liouville directional derivatives are introduced and their properties described. The integral is defined first for broken line paths and afterwards to any regular curve

Objectives: To assess the short-term impact of a single global stretching session on plantar pressures and lumbar range of motion (RoM) over one week in sedentary university students. Design: A randomised controlled trial with two parallel groups. Participants: Sixty-four university students were randomly assigned to a stretching group or control group. The stretching group received a single session of global stretching and the control group remained seated for the same length of time as the stretching session. Main outcome measures: Lumbar RoM and plantar pressures were assessed before, immediately after, 48 hours after, and 7 days after intervention. Results: Group-by-time interaction was significant for lumbar lateral flexion (p = 0.044), right maximal pressure (p = 0.003), left maximal pressure (p = 0.008), right mean pressure (p = 0.025), left mean pressure (p = 0.002), and maximal pressure minus mean pressure in right foot (p = 0.007). The model with plantar pressures showed a significant difference for group-by-time interaction (p = 0.010).Conclusion: Global stretching seems to counteract the ill-effects of prolonged sitting up to seven days with respect to plantar pressure in standing without improving lumbar ROM

Various formulations of the exact renormalization group can be compared in the perturbative domain, in which we have reliable expressions for regularization-independent (universal) quantities. We consider the renormalization of the $\lambda\phi^4$ theory in three dimensions and make a comparison between the sharp-cutoff regularization method and other more recent methods. The former gives considerably better results, while the other methods are far from optimal in the perturbative domain. In addition, these methods present theoretical problems that are already manifest in the renormalization of mass.

This manuscript provides a new integrated view of the development of allergen-specific TH2 and the lack of their associated Treg cells in a unified model, justifying the need for IL-2 to correct allergy conditions.

Arthropod predators preying on vertebrates is generally overlooked in ecological studies, as it is not typically observed in nature and generally considered a rare event. This is likely due to the cryptic nature of these predatory events, the relatively small size of arthropods, and the difficulty in collating published data which is scattered throughout the literature. Although arthropods are known to readily hunt and consume vertebrates, very little is known about these predatory events. In this study, a systematic literature review was conducted to provide a conceptual framework, identify global patterns, and create a searchable database of arthropod preying on vertebrates. This study represents the largest global assessment of arthropod predators and vertebrate prey with over a thousand recorded observations collated from over 80 countries across every continent except Antarctica, where no arthropod predator exists. Arthropod predators were represented by six classes (insects, arachnids, centipedes, and crustaceans: Malacostraca, Ostracoda, Hexanauplia) and over 80 families. Vertebrate prey were represented by five classes (birds, mammals, reptiles, amphibians, fish) and 160 families. The most common prey were frogs consisting of over a third of all observations. The most commonly preyed reptiles were nearly all lizards, half of mammal prey were bats, nearly a third of fish were Cypriniformes, and half of bird prey were passerines. Spiders represented over half of all predatory events found and were the main predator for all vertebrates except birds, which were preyed mostly upon praying mantises. However, prey varied between spider families. For insects, true bugs (Hemiptera) and beetles preyed mostly on amphibians while the aquatic Odonata larvae preyed on amphibians and fish. Decapod predators were observed preying equally between reptiles, birds, and amphibians; with centipedes preying mainly on reptiles and mammals. Predation was mostly recorded from the Americas and Australia, with countries and regions varying between predator and prey groups. This study demonstrates that arthropods are indeed an overlooked predator of vertebrates. Recognizing and quantifying these predator-prey interactions is vital for identifying patterns and the potential impact of these relationships on shaping vertebrate populations and communities. Understanding the possible threat of arthropod predators may be especially important to improve the success of conservation efforts by accounting for predators which may currently be overlooked.

The role of invertebrate predation in shaping vertebrate communities is often underestimated or overlooked, which has resulted in the lack of their recognition in conservation planning. This is evident with predaceous diving beetles (Coleoptera: Dytiscidae) which are often the top predator in many aquatic freshwater habitats. During weekly monitoring of a compensatory habitat reintroduction for an endangered frog species, a group of a dozen adult diving beetles were encountered attacking and quickly dismembering and consuming a tadpole. A single adult diving beetle was also discovered burrowing its head deep inside and consuming a tadpole approximately three to four times its size. Although Dytiscidae are known to occasionally consume vertebrates such as tadpoles, adults are typically considered scavengers, and this communal predatory behavior and feeding method have not been previously documented. Besides these interesting novel behaviors, these observations may have implications for amphibian conservation since management efforts are not typically concerned with naturally occurring ubiquitous threats such as those from small invertebrate predators, as it is rarely been observed in nature. However, this may be perhaps due to their ability to consume prey rapidly, especially if predating in groups. Although amphibian conservation plans expect some losses from natural predation, diving beetles may affect conservation efforts such as captive breeding and reintroductions with populations already on the threshold of extinction and where every individual critical to success.

Data from NASA’s Soil Moisture Active Passive Mission (SMAP) and from the California Cooperative Oceanic Fisheries Investigations (CalCOFI) were used to examine the freshening that occurred during 2015-2016 in the Southern California Current System. Overall the freshening was found to be related to the 2014-2016 Northeast Pacific Warm Anomaly. The primary goal was to determine the feasibility of using SMAP data to observe the surface salinity signal associated with the warming. As a first step direct comparisons were done with salinity from the CalCOFI data at one-meter depth. During 2015 SMAP was saltier than CalCOFI by 0.5 PSU, but biases were reduced to < 0.1 PSU during 2016. South of 33°N, and within 100 km of the coast, SMAP was fresher in 2015 by almost 0.2 PSU. CalCOFI showed freshening of 0.1 PSU. North of 33°N SMAP and CalCOFI saw significant freshening in 2016, SMAP by 0.4 PSU and CalCOFI by 0.2 PSU. Differences between SMAP and CalCOFI are consistent with the increased stratification in 2015 and changes in the mixed layer depth.

Background: While greenness has been associated with lower depression, the generalizability of this association in arid landscapes remains undetermined. We assessed the association between depression and greenness among nursing students living in El Paso, Texas (the Chihuahuan desert). Methods: Depression was measured with the Patient Health Questionnaire-9 scale, and greenness with the normalized difference vegetation index (at buffer sizes =250m, 500m, 1000m). Using data from the National Land Cover Database two additional measures of land patterns were analyzed: grayness and brownness. Structural equation models were used to assess the relationships of these land patterns to depression and quantify the indirect effects of peer alienation. Results: After adjusting for individual characteristics, at buffers 250 m greenness was associated with a decrease in the Incidence Rate Ratios (IRR) of depression by 49% (IRR, 0.51; 95%CI, 0.12-2.10), greyness with increases by 64% (IRR, 1.64; 95%CI, 1.07-2.52) and brownness with decreases by 35% (IRR, 0.65; 95%CI, 0.42-0.99). At buffer 250 m peer alienation explained 17.43% (95% CI, -1.79-36.66) of the association between depression and brownness, suggesting a pathway to depression. Conclusions: We did not observe an association between depression and residential greenness in El Paso, Texas. However, we did observe a protective association between brownness and depression as well as an adverse association with grayness. These results have theoretical implications as based on commonly used frameworks in this literature and adverse association of brownness (and the lack of greenness) and depression was expected.

Introduction: Osteosarcomas of the jaw (OSJ) are rare tumors with a different behavior from osteosarcomas of other bones. This study aims to analyze the clinical, pathological, and therapeutic characteristics of this type of sarcoma. Methods: a retrospective observational study of cases diagnosed with OSJ registered at the “La Paz” University Hospital (Madrid). Results: Eight cases with a diagnosis of OSJ were obtained in a study period of 22 years (2000-2022). The mean age was 41 years. The distribution was 1:1 between the maxilla and mandible. Painful inflammation was the most frequent clinical manifestation. Conventional osteoblastic osteosarcoma was the most common. Survival at 5 years was 50%, while at 10 years, it decreased to 25%. Conclusions: OSJ differs from conventional osteosarcomas of long tubular bones. Surgery continues to be the mainstay of treatment; more studies are needed in which more standardized protocols can be proposed for adjuvant therapeutic management.

The obtention of simple formulae for the Lebesgue constants arising in the the classical Fourier series approximation is presented. Both even and odd cases are treated enlarging Fejér result. Asymptotic formulae are also obtained.

The duality is one of the most interesting properties of the Laplace and Fourier transforms associated to the integer order derivative. Here, we will generalize it for fractional derivatives and extend the results to the Mellin, Z and discrete-time Fourier transforms. The scale and nabla derivatives are used.

This article analyzes 6 probability distributions from the Generalized Pareto family, with 3, 4 and 5 parameters, with main purpose to identify other distributions from this family with applicability in flood frequency analysis compared to the distribution already used in the literature from this family such as Generalized Pareto Type II and Wakeby. This analysis is part of a larger and more complex research carried out in the Faculty of Hydrotechnics regarding the elaboration of a norm for flood frequency analysis using the linear moments method. In Romania, the standard method of parameter estimation is the method of ordinary moments, thus the transition from this method to the method of linear moments is desired. All the necessary elements for the distributions use are presented like, the probability density functions, the complementary cumulative distribution functions, the quantile functions, the exact and approximate relations for estimating parameters, for both methods of parameters estimation. All these elements are necessary for a proper transition between the two methods, especially since the use of the method of ordinary moments is done by choosing the skewness of the observed data depending on the origin of the maximum flows. A flood frequency analysis case study, using annual maximum and annual exceedance series, was carried out for the Prigor river, to numerically present the analyzed distributions. The performance of this distributions is evaluated using relative mean error, relative absolute error and linear moments diagram.

This article presents six probability distributions from the Gamma family with three parameters, for the flood frequency analysis in hydrology. The choice of the Gamma family of statistical dis-tributions was driven by its frequent use in hydrology. In the Faculty of Hydrotechnics, the im-provement of the estimation of maximum flows and including the methodological bases for the realization of a regionalization study with the linear moments method with the corrected pa-rameters was researched, being an element of novelty. The linear moments method is better than MOM because it avoids the choice of skewness depending on the origin of the flows, practiced in Romania. The L-moments method conforms to the current trend for estimating the parameters of statistical distributions. Observed data from hydrometric stations are of relatively short length, so the statistical parameters that characterize them are of a sample that requires correction. The correction of the statistical parameters is proposed, using the method of least squares based on the inverse functions of the statistical distributions expressed with the frequency factor for L-moments. All the necessary elements for their use are presented like, quantile functions, the exact and ap-proximate relations for estimating parameters and frequency factors. A flood frequency analysis case study was carried out for the Ialomita river, to verify the proposed methodology. The per-formance of this distributions is evaluated using Kiling-Gupta and Nash-Sutcliff coefficients.

Estimating the parameters of statistical distributions generally involves solving a system of nonlinear equations or a nonlinear equation, being a technical difficulty in their usual application in hydrology. This article presents improved approximations and, in some cases, new approximations for the estimation with the method of ordinary moments and the method of linear moments, which are useful for the direct calculation of the parameters, because the errors in the approximate estimation are similar to the use of iterative numerical methods. Thirteen statistical distributions of two and three parameters frequently used in hydrology are presented, for which parameter estimation was laborious. Thus, the approximate estimation of the parameters by the two methods is simple but also precise and easily applicable by hydrology researchers. The approximate forms characterized by very small errors are the result of the research conducted within the Faculty of Hydrotechnics to update the romanian normative standards in the hydrotechnical field.

The bilateral tempered fractional derivatives are introduced generalising previous works on the one-sided tempered fractional derivatives and the two-sided fractional derivatives. An analysis of the tempered Riesz potential is done and showed that it cannot be considered as a derivative.

Polyurethane (PU) is a polymer widely used by humans whose recycling is highly complex due his chemical structure, being limited to incineration or accumulation in landfills. Biodegradation by enzymes and microorganisms has been studied for decades as an effective method of biological decomposition. In this study, Tenebrio molitor larvae (T. molitor) were fed with polyurethane foams, which gut enzymes and microorganisms were capable of degrading the polymer by 35% in 17 days of treatment, producing a weight loss of 14% in the mealworm. Changes in T. molitor gut bacterial community and diversity were observed, which may be due to colonization of species associated with PU degradation. Physical and structural biodegradation in PU by T. molitor compared to virgin PU, was demonstrated by Fourier Transform InfraRed spectroscopy (FTIR), Thermal Gravimetric Analysis (TGA) and Scanning Electron Microphotography (SEM).

Inflammatory bowel disease (IBD) is a chronic disease mediated by the immune system and characterized by the inflammation of the gastrointestinal tract. This study is to understand how the use of parenteral nutrition (PN) can affect the adult population diagnosed with IBD. We conducted a systematic review, meta-analysis and a meta-regression. On the different databases, (MEDLINE, Scopus, Cochrane, LILACS, CINAHL, WOS) we found 119 registers, the accuracy was 16% (19 registers); After a Full-text review, only 15 research studies were selected for qualitative synthesis and 10 for Meta-analysis and Meta-regression. The variables used were Crohn’s Disease Activity Index (CDAI), albumin, body weight (BW) and post-operative complications (COM). PN has shown to have efficacy for the treatment of IBD and is compatible with other medicines. The CDAI and albumin improve although the effect of PN are greater after a while. However, the effect on the albumin could be less than the observed value in the meta-analysis, due to a possible publication bias. The BW does not change after intervention. COM utilizing PN has been observed, although the proportion is low.

Study of micro-RNA regulatory networks (known as miRNA’s or miR’s), during development and in known pathologies have been the basis of study over the past decades. Herein, we recapitulate these findings in order to highlight the best underlying mechanisms found to date. We also seek to elucidate how miRNA dysregulation can be associated with many cardiovascular diseases. Furthermore, we discuss miR regulation mechanism during in early development in vivo and invitro. Since many of the miR’s are precursors to transcriptional regulation, we relate back to their molecular control as we can then look together at the fundamental disease they might be exacerbating by this dysregulation.

In the last two decades many detailed full transcriptomic studies on complex biological samples have been published and included in large gene expression repositories. These studies primarily provide bulk expression signal for each sample, including multiple cell-types mixed within the global signal. The cellular heterogeneity in these mixtures does not allow the activity of specific genes in specific cell types to be identified. Therefore, inferring relative cellular composition is a very powerful tool to achieve a more accurate molecular profiling of complex biological samples. In recent decades, computational techniques have been developed to solve this problem by applying cell deconvolution methods, designed to decompose cell mixtures into their cellular components and calculate the relative proportions of these elements. Some of them, only calculate the cell proportions (supervised methods), while other deconvolution algorithms can also identify the gene signatures specific for each cell type (unsupervised methods). In these work, five deconvolution methods (CIBERSORT, FARDEEP, DECONICA, LINSEED and ABIS) were implemented and used to analyze blood and immune cells, and also cancer cells, in complex mixture samples (using three bulk expression datasets). Our study provides three analytical tools (corrplots, cell-signature plots and bar-mixture plots) that allow a thorough comparative analysis of the cell mixture data. The work indicates that CIBERSORT is a robust method optimized for the identification of immune cell-types, but not as efficient in the identification of cancer cells. We also observed that LINSEED is a very powerful unsupervised method that provides precise and specific gene signatures for each of the five main immune cell-types analyzed: neutrophils and monocytes (in the myeloid lineage), B-cells, NK cells and T-cells (in the lymphoid lineage).

Natural products (NPs) are a rich source of structurally novel molecules, and the chemical space they encompass is far from being fully explored. Over history, NPs have represented a significant source of bioactive molecules and have served as a source of inspiration for developing many drugs on the market. On the other hand, computer-aided drug design (CADD) has contributed to drug discovery research, mitigating costs and time. In this sense, compound databases represent a fundamental element for the CADD. This work reviews the progress toward developing compound databases of natural origin, particularly databases developed in Latin America, and their practical applications in the drug discovery area. We also survey the computational methods, emphasizing chemoinformatic approaches to profile natural product databases.

Freshwater fish represent half of all fish species and are the most threatened vertebrate group. Given their considerable passion and knowledge, aquarium hobbyists can play a vital role in their conservation. CARES is made up of many hobbyist organizations, whose purpose is to encourage aquarium hobbyists to the most endangered or extinct-in-the-wild freshwater fish to help ensure their survival. We found the CARES priority list contains nearly six hundred species from twenty families and two dozen species extinct-in-the-wild. The major families were typically the ones with largest hobbyist affiliations such as killifish, livebearers, and cichlids; which alone were half of CARES species. CARES contained every IUCN threatened species of Pseudomugilidae and Valenciidae, but only one percent of threatened Characidae, Cobitidae, and Gobiidae species. No Loricariidae in CARES were in the IUCN red list as they were not scientifically described. Tanzania and Mexico contained the largest amount of species, with the latter containing the most endemics. A large percent of species were classified differently than the IUCN, including a third of extinct-in-the-wild species classified as least concern by the IUCN. The vast disconnect exemplifies the importance of collaboration and information exchange required between hobbyists, the scientific community, and conservation organizations.

Climate change is expected to increase the occurrence of droughts with the hydrology in alpine systems being largely determined by snow dynamics. In this paper we propose a methodology to assess the impact of climate change on both meteorological and hydrological droughts taking into account the dynamics of the snow cover area (SCA). We will also analyse the correlation between these types of droughts. We have generated ensembles of local climate scenarios based on regional climate models (RCMs) representative of potential future conditions. We have considered several sources of uncertainty: different historical climate databases, simulations obtained with several RCMs, and some statistical downscaling techniques. We then used a stochastic weather generator (SWG) to generate multiple climatic series preserving the characteristics of the ensemble scenario. These were simulated within a cellular automata (CA) model to generate multiple SCA future series. They were used to calculate multiple series of meteorological drought indices, the Standardized Precipitation Index (SPI) and Standardized Precipitation Evapotranspiration Index (SPEI)) and a novel hydrological drought index (Standardized Snow Cover Index (SSCI)). A linear correlation analysis was applied to both types of drought to analyse how they propagate and the time delay between them. We applied the proposed methodology to the Sierra Nevada (southern Spain) where we estimated a general increase in meteorological and hydrological drought magnitude and duration for the horizon 2071-2100 under the RCP 8.5 emission scenario. The SCA droughts also revealed a significant increase in drought intensity. The meteorological drought propagation to SCA droughts is reflected in an immediate or short time (1 month), obtaining significant correlations in lower accumulation periods of drought indices (3 and 6 months). This will allow us to obtain information about meteorological drought from SCA deficits and vice versa.

One of the non-linear phenomena that affect high bandwidth and long reach communication systems is the non-linear phenomenon called four-wave mixing (FWM). Unfortunately, the simulation of such systems aiming to obtain their design parameter limitations require more time as the number of channels increases. In this paper, we propose a new high-performance computational model to obtain optimal design parameters in a multi san Dense Wavelength Division Multiplexing (DWDM) system, limited by FWM and the intrinsic Amplified Spontaneous Emission (ASE) noise of optical amplifiers employed in each segment. The simulation in this work provides a complete optical design characterization and compares the efficiency and speed improvement of the proposed parallelization model versus a previous sequential model. Additionally, an analysis of the computational complexity of parallel model is presented, where two parallel implementations are used. First, Open Multi−Processing (OpenMP), based on the use of a central, multi-core processing unit is used and secondly the Compute Unified Device Arquitecture (CUDA), which is based on the use of graphics processing unit. Results show that parallelism improves to up to 40 times the performance of the simulation when nested parallelization with CUDA is used, over de sequential method and up to 6 times compared with the implementation with OpenMP using 12 processors. Within our parallel implementation, it is possible to simulate with an increased number of channels, that was unpractical in the sequential simulation.

The removal of chromium(VI) from acidic (HCl) medium through non-dispersive extraction with strip dispersion (NDXSD) was investigated using a microporous PVDF membrane support in a permeation cell. The ionic liquid Cyphos IL102 (phosphonium salt) in Solvesso 100 was used as organic phase. In NDXSD the stripping phase (NaOH) is dispersed in the organic phase in the cell side with an impeller stirrer adequate to form a strip dispersion. This pseudo-emulsion phase (organic + strip solutions) provides a constant supply of the Cyphos IL102/Solvesso 100 to the membrane phase. Various hydrodynamic and chemical parameters, such as variation in the feed and pseudo-emulsion stirring speeds, HCl and Cr(VI) concentrations in the feed phase, and carrier concentration, were investigated. From the experimental data, several mass transfer coefficients were estimated, as well as it was investigated the performance of the present system against other ionic liquids and the presence of base metals in the feed phase.

The catalytic parameters describing enzyme catalysis are discussed in the context of the design of de novo enzymes. It is shown that high values of the catalytic efficiency may in some cases reflect tight substrate binding and lead to an immediate levelling-off of rates to reach a low plateau, an undesirable scenario for many industrial applications. It is argued that increasing the catalytic rate constant should be a main target in de novo enzyme engineering.

Security in IoT systems is extremely important, as an intrusion into an IoT device or network can affect not only our domestic lives, but also industrial assets, with the potential to cause enormous damage. We discuss IoT security issues as defined by the OWASP Foundation, focusing on network related aspects. After a brief description of SDN in general and OpenFlow in particular, we discuss how SDN technologies can greatly help in designing and deploying more secure IoT networks by enhancing the cryptographic capabilities of devices, isolating devices or networks, blocking access to unwanted services, redirecting traffic to deep inspection systems, monitoring packet flows and devices, etc. These capabilities can be implemented using open-source OpenFlow controllers such as Faucet.

Abstract Chaga´s disease caused by Trypanosoma cruzi infections is included in the group of neglected diseases, and efforts to develop new therapeutic or immunoprevention approaches have not been successful. After the publication of the T. cruzi genome, the number of molecular and biochemical studies on this parasite have increased considerably, many of which are focused on families of variant-surface-proteins, especially the trans-sialidases, mucins and mucin-associated proteins. The disperse gene protein 1 family (DGF-1) is one of the most abundant families in the T. cruzi genome, however, the large gene size, high copy numbers, and low antibody titers detected in infected humans make it an unattractive study target. Here, we argue that the DGF-1 gene family although not being the most obvious participant of the host-parasite immunological gamble, where T. cruzi appears to have the upper hand, it may play an important role in more basic host-parasite interactions that deserve further examination.

Despite widespread use of combined antiretroviral therapy (cART) and increased life expectancy in people living with HIV (PLWH), HIV-related lymphomas (HRL) remain a leading cause of cancer morbidity and mortality for PLWH, even in patients optimally treated with cART. While incidence of aggressive forms of non-Hodgkin lymphoma decreased after cART advent, incidence of Hodgkin lymphoma (HL) has increased among PLWH in recent decades. The coinfection of Epstein Barr virus plays a crucial role in the pathogenesis of HL in the HIV setting. Currently, PLWH with HRL, including HL, are treated similarly to HIV-negative patients and, importantly, the prognosis of HL in PLWH is approaching to that of the general population. In this regard, effective chem-otherapy is strongly recommended since it has been shown to improve survival rates in all lymphoma subtypes, including HL. As a consequence, interdisciplinary collaboration between HIV specialists and hemato-oncologists for the management of potential drug-drug interactions and overlapping toxicities between antiretroviral and antineoplastic drugs is crucial for the op-timal treatment of PLWH with HL. In this article the authors review and update the epidemio-logical, clinical and biological aspects of HL presenting in PLWH with special emphasis in the improvement on prognosis and the factors that have contributed to it.

Despite widespread use of combined antiretroviral therapy (ART) and increased life expectancy in people living with HIV (PLWH), HIV-related lymphomas (HRL) remain a leading cause of cancer morbidity and mortality for PLWH, even in patients optimally treated with ART. While incidence of aggressive forms of non-Hodgkin lymphoma decreased after ART advent, incidence of Hodgkin lymphoma (HL) has increased among PLWH in recent decades. The coinfection of Epstein Barr virus plays a crucial role in the pathogenesis of HL in the HIV setting. Currently, PLWH with HRL, including HL, are treated similarly to HIV-negative patients and, importantly, the prognosis of HL in PLWH is approaching to that of the general population. In this regard, effective chemotherapy is strongly recommended since it has been shown to improve survival rates in all lymphoma subtypes, including HL. As a consequence, interdisciplinary collaboration between HIV specialists and hemato-oncologists for the management of potential drug-drug interactions and overlapping toxicities between antiretroviral and antineoplastic drugs is crucial for the optimal treatment of PLWH with HL. In this article the authors review and update the epidemiological, clinical and biological aspects of HL presenting in PLWH with special emphasis in the improvement on prognosis and the factors that have contributed to it.

Pterygium is a common ocular disease caused by abnormal cellular proliferation leading to abnormal fibrovascular growth of the conjunctiva. The main treatment is surgical removal; however, despite the improvement of surgical techniques and development of adjuvant therapies, postoperative recurrence, which can be as high as 89%, remains a challenge. Currently, pterygium excision with conjunctival autograft remains the preferred surgical technique to decrease recurrence, especially when combined with ciclosporin eye drops. Nevertheless, there is no gold standard surgical technique to prevent pterygium recurrence. Therefore, this review aims to assess the safety, effectiveness and, applicability of platelet-rich fibrin membrane for primary pterygium surgery and assess its possible benefits in resource-limited settings.

The two major global immunisation agenda framings (Missed Opportunity for Immunisation, MOI vs Immunisation Defaulting) are interchangeably and inappropriately used in public health research and practice with flawed or misleading strategies recommended and adopted in various settings globally. This is evident in the fact that many opportunities to adopt evidence/findings from immunisation coverage research in policy are grossly missed. Ineffectiveness of inappropriate interventions from biased evidence can discourage and mislead the governance to make radical decisions by discretion. This could be the reason for the inability of low-and middle-income countries to vaccinate 80% of their children and otherwise; this also poses a global health threat to capable nations. The current guideline and information on MOI and immunisation defaulting appear insufficient and a little clarification on it would assist forerunners in immunisation to achieve measurable progress in ensuring good coverage especially in low-and middle-income countries. Consequently, this paper is aimed at addressing this issue in immunisation practice with appropriate recommendations. Optimistically, this will stimulate further discussions, streamline differences, and gear global immunisation governance on the subject matter, to achieve the target coverage by 2030 in low-and middle-income countries.

The purpose of this study is to estimate the mean transitioning probabilities from a Healthy state to malaria positive uncomplicated state or to malaria positive severe state. It also classifies the various transitioning probabilities of moving through the various states based on some baseline characteristics. Malaria test results for 2019 over a 12-month period were collected from the University of Ghana school clinic. An H-U model for the study was developed and the transition rates from the cross-sectional data are indicated. With two states Healthy (H) and Uncomplicated (U) forming a state space, there were four possible transitions. The results show that the probability of transitioning from a Healthy state to a malaria positive state is 0.03% while the probability that an individual will remain at Healthy state (H) after the test is 99.73%. It was found that if an individual is already positive and has taken medication the probability that its second test came out negative is 6.45% while the chances that it will remain positive but uncomplicated is 93.55%. The study also showed that in the long run, about 95.98% of persons who visited the student clinic with malaria symptoms recorded negative tests for malaria parasite while about 4% recorded positive for malaria. In terms of disaggregation by gender, it was realized that the number of reported negative test results were higher for females (97.08%) than for males (96.13%). However, the infection rate is higher for males (3.87%) than females (2.92%). It is recommended that in as much as the University of Ghana has two health centers (a clinic and hospital), there should be a centralized system to track students’ health so research done would not be biased.

At 12:28 UTC (8:28 PM, local time) on 15 January 2023, a shallow, moderate earthquake with a magnitude (Mw) of 4.7 and a depth of one (1) kilometer shook the northern part of Leyte Island in the central part of the Philippines. The ground shaking was felt at PHIVOLCS Earthquake Intensity Scale (PEIS) VI, (very strong) equivalent to Modified Mercalli Intensity (MMI) VI in areas along the strike of the Leyte segment of the Philippine Fault. Even though this earthquake is classified as moderate in size, significant geologic, structural, and socio-economic impacts were documented. Most of the earthquake impacts that include surface rupture, liquefaction, and mass movements are limited near the epicentral area. The earthquake produced an 8-km-long surface rupture, the first documented rupture generated by a magnitude &lt;6 along the Philippine Fault, and is unusual in other surface rupturing earthquakes worldwide. It injured 18 persons and damaged 434 residential buildings and 26 public infrastructures which amounts to about 500 thousand US dollars. Structural damages were caused by surface rupture and/or poor engineering construction practices. Analysis of the seismic waveform and recorded peak ground acceleration (PGA) suggests that the subsurface geology influenced the ground motion amplification in an area near the epicenter. Based on the hypocenter, focal mechanism solution, aftershock distribution, and actual field observation, the causative fault for this event is the northern end of the Philippine Fault – Leyte segment. Moderate in size, this earthquake emphasizes the need and importance of documenting moderate-sized earthquakes as a tool and guide for medium and long-term earthquake risk assessment and resiliency.

In response to the COVID-19 pandemic, and resultant cancellation of geoscience fieldwork, as well as outstanding accessibility issues inherent in conducting fieldwork, we developed a virtual geological fieldtrip (VFT) to the Huronian age deposits in the Whitefish Falls area, Ontario, Canada. This region is a geologically significant site in which many Ontario universities conduct undergraduate teaching due to the high-quality exposures. In this contribution we describe and comment on the development of this openly available resource, the motivations in doing so, the challenges faced, its pedagogical impact and relevance, as well as provide suggestions to others in the development of such resources. Our multimedia VFT combines 360° imagery, georeferenced data on integrated maps, and multi-scale imagery (aerial/drone, outcrop, and thin section images). The VFT was built using the Esri Storymaps platform, and thus offers us the opportunity to review the effectiveness of building such resources using this medium, as well as our approach to doing so. We conclude that the Esri Storymaps platform provides a sound medium for the dissemination of multimedia VFTs, but that some aspects of in-person fieldwork remain hard to replicate. Most notably, ‘hands on experience’ and specific activities such as geological mapping. In addition, while VFTs alleviate some accessibility barriers to geoscience fieldwork, substantial barriers remain that should remain the focus of both pedagogical and geoscience work.