Diffuse optical tomography (DOT) technology enables a differentiation between oxyhemoglobin (HbO) and deoxyhemoglobin (HbR) in the sensory and motor cerebral gyri, resulting in greater sensitivity for cerebral activation compared to functional magnetic resonance imaging (fMRI). Here, we introduce a novel approach where functional regions of interest (ROIs) are created based on the specific signal behavior observed in DOT measurements, in contrast to the conventional use of structural-ROIs obtained from anatomical information. The generation of cerebral activation maps involves using the general linear model (GLM) to compare the outcomes obtained from both the functional and structural ROI approaches. DOT-derived maps are then compared with maps derived from fMRI datasets considered the gold standard for assessing functional brain activity. The results obtained demonstrate the effectiveness of employing functional ROIs to improve the spatial location of functional activations in the sensory and motor cerebral gyri by leveraging the neural synchronization data provided by DOT. Furthermore, this methodology simplifies data processing in animal models, where anatomical differences compared to the human head can pose challenges. By incorporating functional ROIs prior to GLM application, this study offers enhancements to DOT analysis techniques and broadens its applicability in both human and animal models.

In industrial environments, nesting consists in cutting or extracting pieces from a material sheet, with the purpose of minimizing the surface of the sheet used. This problem is present in different types of industries, such as shipping, aeronautics, woodworking, footwear, and so on. In this work, the aim is to find an acceptable solution to solve complex nesting problems. The research developed is oriented to sacrifice accuracy for speed so as to obtain robust solutions in less computational time. To achieve this, a greedy method and a genetic algorithm have been implemented, being the latter responsible for generating a sequence for the placement of the pieces, where each piece is placed in its current optimal position with the help of a representation system for both the pieces and the material sheet.

Free-living amoebae (FLA) are protozoa widely distributed in the environment, found in a great diversity of terrestrial biomes. However, few genera of FLA are linked to human infections. Within these genera, Acanthamoeba spp., classified by genotypes (T1-T23), being T1, T2, T4, T5, T10, T12, and T18 as capable of causing granulomatous amoebic encephalitis (GAE) in immunocompromised patients mostly and Acanthamoeba keratitis related to genotypes T2, T3, T4, T5, T6, T10, T11, T12 and T15 in apparently healthy patients. Meanwhile, Naegleria fowleri is the causative agent of an acute infection called primary amoebic meningoencephalitis (PAM), while Balamuthia mandrillaris, like some Acanthamoeba genotypes, causes GAE, differing from the latter in the description of numerous cases in patients immunocompetent. Finally, other FLA related to the pathologies mentioned above have been reported; Sappinia pedata is responsible for one case of amoebic encephalitis; Vermamoeba vermiformis has been found in cases of ocular damage, and its extraordinary capacity as endo-cytobiont for microorganisms of public health importance such as Legionella pneumophila, Bacillus anthracis, Pseudomonas aeruginosa, among others. In this review, issues related to the epidemiology of each one are addressed, updating their geographic distribution and cases reported in recent years for pathogenic FLA.

Biosensors are analytical devices that utilize biological interactions to detect and quantify clinical biomarkers, contaminants, allergens, and microorganisms. They combine different disciplines including analytical chemistry, molecular biology, and electrical engineering. Biosensors operate by coupling a bioreceptor, such as nucleic acid or proteins, with a transducer that converts the biological interaction into an electrical signal. Electrochemical and optical transduction are commonly used approaches due to their high detection capability and compatibility with miniaturization. Biosensors provide both high specificity and sensitivity and can be integrated into low-cost microfluidic platforms for rapid and point-of-care applications. These attributes make these devices valuable tools in analytical chemistry, particularly for early diagnostic applications. However, conventional biosensors face challenges related to the immobilization of biorecognition elements on the transducer surface, leading to issues like lost of sensitivity and selectivity. To address these problems, the introduction of nanomaterials, particularly magnetic nanoparticles (MNPs) and magnetic beads (MBs), has been implemented. MNPs combine their magnetic properties with other interesting characteristics such as small size, high surface-to-volume ratio, and excellent biocompatibility. They can be tailored for specific applications and have been extensively used in various fields, including biosensing and clinical diagnosis. Furthermore, MNPs simplify sample preparation by isolating target analytes through magnetic separation, thus improving sensitivity, and reducing analysis time and interference phenomena. The synthesis and modification of MNPs play a crucial role in adjusting their properties for different applications. This review presents an overview of the synthesis and surface modifications of magnetic nanoparticles, their role in the development of biosensors and bioassays, and their applications across various scientific areas.

The brain being arguably the most complex organ in the human body, its detailed functioning is yet to be fully deciphered, let alone accurately modeled. Nonetheless, the medical community has gathered quite a remarkable amount of studies about the consequences of illnesses and injuries on its development and functioning. This bibliographic review aims to cover mostly the findings related to the changes in the physical distribution of neurons and their connections - the connectome -, both structural and functional, as well as their modelling. It does not intend to offer an extensive medical description of all injuries and diseases affecting the brain, rather presenting the most common ones succinctly so the need for accurate brain modelling can be fully understood and pondered, offering propositions to this aim.

In an analogous manner as occurred during the development of a connected metabolism that at some point reached characteristics associated with what is called ‘life’ ―due mainly to a catalytic closure phenomenon when chemicals started to autocatalyze themselves forming a closed web of chemical reactions― it is here proposed that cognition and consciousness (or features associated with them) arose as a consequence of another type of closure within the nervous system, the brain especially. Proper brain function requires an efficient web of connections and once certain complexity is attained due to the number and coordinated activities of the brain cell networks, the emergent properties of cognition and consciousness take place. Seeking to identify main features of the nervous system organization for optimal function, it is here proposed that while catalytic closure yielded life, neuroglial closure produced cognition/consciousness.

Physical rehabilitation aims to help people recover their mobility and strength after an injury or illness. One way to evaluate progress in rehabilitation is through isokinetic prototype tests that describe the dynamic characteristics of an isokinetic leg extension device for rehabilitation and control action. These tests use an isokinetic system to assess muscle strength and performance in a patient during isometric or isokinetic contraction. An experimental prototype allows the performance of the device to be evaluated in a controlled environment prior to use by the patient. In order to achieve physical recovery from musculoskeletal injuries in the lower limbs and achieve the reintegration of the affected subject into society as an independent and autonomous individual in their daily activities, a control model is presented that introduces a medical isokinetic rehabilitation protocol, where the element that allows carrying out such protocol consists of a magnetic particle brake whose control action is strongly influenced by the dynamics of the system when in contact with the end user, specifically the patient's legs in the stretch from the knee to the ankle. The results of these tests are valuable for health professionals seeking to measure their patient’s progress during the rehabilitation process and determine when it is safe and appropriate to advance in their treatment.

The interest in obtaining new composite materials with diverse properties has created a growing interest in natural fi-bers as reinforcement in polymers, which has generated an impact in sectors such as automotive and construction, dis-placing synthetic fibers. Properties such as low density, low cost, and rene.wable make these fibers an attractive alterna-tive to reduce environmental impact. Their application in polymers, such as polypropylene, polyethylene, and epoxy resins, has allowed the modification of polymeric composite materials' mechanical and physical properties (NFRP). This review focuses on investigating the status of natural fiber-reinforced polymers. It analyzes their worldwide demand, chemical characteristics, physical and mechanical properties, and various applications in different sectors and indus-tries. In addition, the advantages and disadvantages of NFRPs are highlighted, highlighting their potential for new ap-plications.

Introduction: The effect of halogenated drugs as cardioprotectors in cardiac surgery has been evaluated in several studies. However, the possibility that there is a protective role at renal level, triggered by their use, is currently under study. Aortic valve replacement and coronary revascularization are the most frequent surgeries in cardiac surgery. Our research evaluates the effect of desflurane compared to propofol in aortic valve replacement surgery at renal level; including its administration during extracorporeal circulation. Method: Quasi-experimental prospective study performed on 60 patients, divided into 2 groups according to the drug used in intraoperative aortic valve replacement surgery. In group 1 propofol was used as a hypnotic during surgery, in group 2 desflurane was used. Differences in kidney damage measured through the urinary NGAL marker were evaluated. Other markers of renal function and myocardial damage and the need for inotropic support during the first 48 hours were also measured. Results: There were significant variations in the values ​​of urinary NGAL and creatinine regarding to basal values ​​in the propofol group, but not in the desflurane group, in which there were no differences in the hemodynamic parameters and myocardial damage. Conclusion: the use of desflurane during aortic valve replacement surgery produced better renal preservation than propofol.

Development of biomarkers of analytes with interest in clinic is an important field of study. In this work, we synthesized and analyzed the new fluorescent acetate-biomarker, Iso-PG. The mechanism of detection is the acetate buffer mediated proton transfer reaction. The rate constants involved were obtained, and we measured the change in the fluorescence lifetime produced as a consequence of the presence of acetate in the medium. Finally, we checked its potential use as acetate biomarker in synthetic serum

Abstract Chaga´s disease caused by Trypanosoma cruzi infections is included in the group of neglected diseases, and efforts to develop new therapeutic or immunoprevention approaches have not been successful. After the publication of the T. cruzi genome, the number of molecular and biochemical studies on this parasite have increased considerably, many of which are focused on families of variant-surface-proteins, especially the trans-sialidases, mucins and mucin-associated proteins. The disperse gene protein 1 family (DGF-1) is one of the most abundant families in the T. cruzi genome, however, the large gene size, high copy numbers, and low antibody titers detected in infected humans make it an unattractive study target. Here, we argue that the DGF-1 gene family although not being the most obvious participant of the host-parasite immunological gamble, where T. cruzi appears to have the upper hand, it may play an important role in more basic host-parasite interactions that deserve further examination.

In this work a new method is proposed to tackle down the multiple objective optimization problem of the calculation of cation distribution in spinels structure, through the difference of intensity ratios between experimental and calculated intensities of cation sensitive Bragg planes, by introducing a new factor, Rabs, in Bertaut method. This factor is introduced as the sum of absolute R factors, and it is minimized by varying cation distribution. To test this method aluminate manganese spinel where synthesized though modified Pechini method and characterized though XRD. The results show to be in agreement with literature for the aluminum inversion in tetrahedral sites, which is near to the reported value of 10%. Also, it was noticed that the manganese atoms are present in octahedral sites with a mixed valence state of +2 and +3. Which might be an indicator that oxygen vacancies are present in the structure, so the vacancies value of oxygen is proposed considering the total charge of cations and thus proposing the value of 3.678 mol per formula unit of the spinel, thus having the next stoichiometry considering normalized Al and Mn, MnAl2O3.678. Finally, the last cation distribution proposed was [Mn0.867^(+2) Al0.129^(+3) ][Mn0.034^(+2) Mn0.098^(+3) Al1.871^(+3) ] O3.678 with a Rabs factor value of 0.6466, which considers the cation distribution and oxygen vacancies.

The food system, the most important driver of planetary transformation, is in a deep crisis. Therefore, seeking a sustainable and socially-fair transition pathway becomes an issue of utmost priority for our own survival. The consideration of food as a commodity, a social construct that played a central role in driving this crisis, remains the uncontested narrative to lead the different transition pathways what seems rather contradictory. By exploring the normative values in the transition landscape, this paper seeks to understand how relevant is the hegemonic narrative of “food as commodity” and its alternative of “food as commons” to determine transition trajectories and food policy beliefs. Applying the Multi-level Perspective framework and developing the ill-studied “agency in transition”, this research enquired food-related professionals that belong to an online community of practice (N=95) on valuation of food dimensions and agency in food transitions to check whether the valuation of food is relevant to explain personal stances in transition. Results suggest the socially-constructed view of food as commodity is positively correlated to the gradual reforming attitude, whereas food as commons is positively correlated to the counter-hegemonic transformers regardless the self-defined position in the transition landscape (regime or niches). At personal level, there are multiple loci of resistance with counter-hegemonic attitudes in varied institutions of the regime and the innovative niches, many of them holding this discourse of food as commons. Conversely, alter-hegemonic attitudes are not positively correlated to this alternative discourse and they may inadvertently or purportedly reinforce the ‘‘neoliberal narrative’’. Food as commons, a different narrative whose rationale is explained in the paper, seems to be a relevant framework that could enrich the multiple transformative constituencies that challenge the industrial food system and therefore facilitate the convergence of movements that reject the commodification of food.

Commons and food are experiencing a revival in recent years and yet the links between both are almost absent in academic and political discourses. Commons are often portrayed as historical and yet innovative governing mechanisms that can challenge the State-Market hegemony. On the other side, food is both a relevant agent of change and a major driver of planetary destruction, being thus cause and solution to multiple crises that affect humankind. Departing from the commodification of food as one root cause of the broken global food system, this text firstly situates and discusses the different schools of thought (or epistemologies) that have addressed the private/public, commodity/commons nature of goods in general, and then explores how those schools have considered food in particular. To do so, the author has defined five epistemologies, four academic (economic, legal, historical and political) and one non-academic (grassroots activists). The analysis highlights how those epistemologies have yielded incommensurable understandings and conflicting vocabularies, hence creating confusion in the socio-political realm and even rejection around the idea of food being considered as a commons. The economic epistemic regard has reigned over the others by applying an approach to commons, public and private goods that is theoretical, reductionist and ontological instead of phenomenological, therefore preventing or obscuring other scholarly or practical understanding of commons. When applied to food, the iron law of economics dictated that food, a private good based on rivalry and excludability, shall be better allocated through market mechanisms with absolute proprietary rights and valued as a pure commodity. This reductionist view collides with the plurality of meanings of food in different societies, civilisations and historical periods, as other schools of thought indicate. The author uses diverse epistemic tools to re-construct food as a commons, based on its essentiality to human beings and societies and the customary and contemporary praxis to produce, consume and govern food collectively through non-market mechanisms for more than 2000 centuries. As commoning has instituting power to create different political and legal frameworks, if food is valued differently the entire architecture of the global food system would change, as the grassroots activist school claims. Re-commoning food defies the legal and political scaffoldings that sustain the hegemony of market and state decision-makers over eaters and food producers and informs sustainable forms of food production (agro-ecology), new collective practices of governance (food democracies) and alternative policies to regain control over the food system (food sovereignty). Food as a commons is an agent of change with transformative power, no matter what economists say.

Axial spondyloarthritis (axSpA) is a chronic rheumatic disease characterised by the presence of inflammatory back pain. In patients with chronic low back pain, the lumbar flexion relaxation phenomenon measured by surface electromiography (sEMG) differs from that in healthy individuals. However, sEMG activity in axSpA patients has not been studied. The purpose of this study was to analyse the flexion relaxation phenomenon in axSpA patients. A study evaluating 39 axSpA patients and 35 healthy controls was conducted. sEMG activity at the erector spinae muscles was measured during lumbar full flexion movements. sEMG activity was compared between axSpA patients and the controls, as well as between active (BASDAI≥4) and non-active (BASDAI<4) patients. The reliability (using intraclass correlation coefficients (ICC)), criterion validity and discriminant validity using the area Under the curve (AUC) for the inverse flexion/relaxation ratio (1/FRR) were evaluated. Significant differences (p<0.05) were observed between axSpA patients and the control group in lumbar electric activity, especially during flexion, relaxation and extension and in FRR and 1/FRR (0.66±0.39 vs. 0.25±0.19, respectively). In addition, significant differences were found between active and non-active but also between non-active and healthy subjects. The sEMG showed good reliability (ICC>0.8 for 1/FRR) and criterion validity. ROC analysis showed good discriminant validity for axSpA patients (AUC=0.835) vs. the control group using 1/FRR. An abnormal flexion/relaxation phenomenon exists in axSpA patients compared with controls. sEMG could be an additional objective tool in the evaluation of patient function and disease activity status.

A reduced order model is developed to monitor aeroengines condition (defining their degradation from a baseline state) in real-time, by using data collected in specific sensors. This reduced model is constructed by applying higher order singular value decomposition plus interpolation to appropriate data, organized in tensor form. Such data are obtained using a detailed engine model that takes the engine physics into account. Thus, the method synergically combines the advantages of data-driven (fast online operation) and model-based (the engine physics is accounted for) condition monitoring methods. Using this reduced order model as surrogate of the engine model, two gradient-like condition monitoring tools are constructed. The first tool is extremely fast and able to precisely compute `on the fly’ the turbine inlet temperature, which is a paramount parameter for the engine performance, operation, and maintenance, and can only be roughly estimated by the engine instrumentation in civil aviation. The second tool is not so fast (but still reasonably inexpensive) and precisely computes both, the engine degradation and the turbine inlet temperature at which sensors data have been acquired. These tools are robust in connection with random noise added to the sensors data and can be straight forwardly applied to other mechanical systems.

We propose a spectral filter based on Plastic Optical Fiber with micro-holes as a low-cost, robust, and highly reproducible spectral filter. The spectral filter is explored for two configurations: fiber extended in a straight line, and a fiber optic loop mirror scheme configuration. The transmission traces indicate a spectral blue shift of peak transmission, at 587 nm, 567 nm, 556 nm, and 536 nm for 0, 1, 2, and 3 holes in the fiber, respectively. The filter exhibits a bandpass period of approximately 120 nm. Additionally, we conducted a comparison of the transmission with holes separated by distances of 1 cm and 500 μm. The results demonstrate that the distance between holes does not alter the spectral transmission of the filter. In the case of the fiber loop mirror configuration, we observed that the bandpass can be adjusted, suggesting the presence of multimode interference. Exploring variations in the refractive index within the holes by filling them with glucose solutions at various concentrations, we determined that the filtering band and spectral shape remains unaltered, ensuring a stable and robust operation of our spectral filter.

Objects recognition is a necessary task in smart city environments. This recognition can be used in processes such as the reconstruction of the environment map or the intelligent navigation of vehicles. This paper proposes an architecture that integrates heterogeneous distributed information to recognize objects in intelligent environments. The architecture is based on the IoT / Industry 4.0 model to interconnect the devices, called Smart Resources. Smart Resources can process local sensor data and send information to other devices. These other devices can be located in the same operating range, the Edge, in the same intranet, the Fog, or on the Internet, the Cloud. Smart Resources must have an intelligent layer in order to be able to process the information. A system with two Smart Resources equipped with different image sensors has been implemented to validate the architecture. Experiments show that the integration of information increases the certainty in the recognition of objects between 2\% and 4\%. Consequently, in the field of intelligent environments, it seems appropriate to provide the devices with intelligence, but also capabilities to collaborate closely with other devices.

There are different ways to analyse energy absorbance (EA) in the human auditory system. In previous research, we developed a complete finite element model (FEM) of the human auditory system. In this mentioned work, the external auditory canal (EAC), middle ear, and inner ear (spiral cochlea, vestibule, and semi-circular canals) were modelled based on human temporal bone histological sections. Multiple acoustic, structure and fluid-coupled analyses were conducted using the FEM to perform harmonic analyses in the 0.1–10 kHz range. Once the FEM had been validated with published experimental data, the FEM numerical results were used to calculate the EA or energy reflected (ER) by the tympanic membrane. This EA was also measured in clinical audiology tests which were used as a diagnostic parameter. A mathematical approach was developed to calculate the EA and ER, with numerical and experimental results showing adequate correlation up to 1 kHz. Another published FEM had adapted its boundary conditions to replicate experimental results. Here, we recalculated those numerical results by applying the natural boundary conditions of human hearing and found that the results almost totally agreed with our FEM. This boundary problem is frequent and problematic in experimental hearing test protocols: the more invasive they are, the more the results are affected. One of the main objectives of using FEMs is to explore how the experimental test conditions influence the results. Further work will still be required to uncover the relationship between the middle ear structure and EA to clarify how to best use FEMs. Moreover, the FEM boundary conditions must be more representative in future work to ensure their adequate interpretation.

Macrophages are essential innate immune cells characterized by a high diversity and plasticity. In vitro, their full dynamic range of activation profiles include the classical pro-inflammatory (M1) and the alternative anti-inflammatory (M2) program. Bistability usually arises in biological systems that contain a positive-feedback loop or a mutually inhibitory, double-negative-feedback loop, which are common regulatory motifs reported for macrophage transitions from one activation state to the other one. This switch-like behavior of macrophage is observed at four different levels. First, a decision-making module in signal transduction includes mutual inhibitory interactions between M1 (STAT1 and NF-KB/p50-p65) and M2 (STAT3 and NF-KB/p50-p50) signaling pathways. Second, a switch-like behavior at the gene expression level includes complex network motifs of transcription factors and miRNAs. Third, those changes impact metabolic gene expression leading to several switches in energy production, NADPH and ROS production, TCA cycle functionality, biosynthesis and nitrogen metabolism. Fourth, metabolic changes are monitored by specialized metabolic sensors coupled to AMPK and mTOR activity to provide stability by maintaining the signals to promote either M1 or M2 activation. The targeting of robust molecular switches has the potential to treat a broad range of widespread diseases such as sepsis, cancer or chronic inflammatory diseases.

We aimed to delineate cardiopulmonary interactions in acute bronchiolitis and to evaluate the capacity of a combined cardiopulmonary ultrasonography to predict the need for respiratory support. This was a prospective observational single-center study that includes infants < 12 month of age admitted to a hospital due to acute bronchiolitis. All the included patients under-went clinical, laboratory and cardiopulmonary ultrasonographic evaluation at the same time point within 24 hours of hospital admission. The existence of significant correlation between car-diac and respiratory parameters was the primary outcome. The association of different cardio-pulmonary variables with the need of respiratory support higher than O2, the length of stay hos-pitalization, the PICU stay, and the duration of respiratory support were a secondary outcome. We enrolled 112 infants (median age 1 (0.5-3) months; 62% males) hospitalized with acute bron-chiolitis. Increased values of the pulmonary variables (BROSJOD score, pCO2 and LUS) showed moderate correlations with NT-proBNP and all echocardiographic parameters indicative of pulmonary hypertension and myocardial dysfunction. Up to 36 (32%) infants required respira-tory support during the hospitalization. This group presented with higher lung ultrasound score (p<0.001), and increased values of Tei index (p<0.001) and pulmonary artery pressures (p<0.001). All the analyzed respiratory and cardiac variables showed moderate to strong correlations with the LOS hospitalization and the time of respiratory support. Lung ultrasound and echocardiog-raphy showed a moderate to strong predictive accuracy for the need of respiratory support in the ROC analysis, with AUC varying from 0.74 to 0.87. Conclusion: Those cases of bronchiolitis with a worse pulmonary status presented with a more impaired cardiac status. Cardiopulmonary ul-trasonography could be a good strategy to easily identify high-risk population for a complicated acute bronchiolitis hospitalization.

In the last two decades many detailed full transcriptomic studies on complex biological samples have been published and included in large gene expression repositories. These studies primarily provide bulk expression signal for each sample, including multiple cell-types mixed within the global signal. The cellular heterogeneity in these mixtures does not allow the activity of specific genes in specific cell types to be identified. Therefore, inferring relative cellular composition is a very powerful tool to achieve a more accurate molecular profiling of complex biological samples. In recent decades, computational techniques have been developed to solve this problem by applying cell deconvolution methods, designed to decompose cell mixtures into their cellular components and calculate the relative proportions of these elements. Some of them, only calculate the cell proportions (supervised methods), while other deconvolution algorithms can also identify the gene signatures specific for each cell type (unsupervised methods). In these work, five deconvolution methods (CIBERSORT, FARDEEP, DECONICA, LINSEED and ABIS) were implemented and used to analyze blood and immune cells, and also cancer cells, in complex mixture samples (using three bulk expression datasets). Our study provides three analytical tools (corrplots, cell-signature plots and bar-mixture plots) that allow a thorough comparative analysis of the cell mixture data. The work indicates that CIBERSORT is a robust method optimized for the identification of immune cell-types, but not as efficient in the identification of cancer cells. We also observed that LINSEED is a very powerful unsupervised method that provides precise and specific gene signatures for each of the five main immune cell-types analyzed: neutrophils and monocytes (in the myeloid lineage), B-cells, NK cells and T-cells (in the lymphoid lineage).

In studies of dynamic stability and power quality, it is necessary to know the mechanical parameters that determine the transient response of a wind turbine. The exact value of these parameters is not as decisive as the power curve can be, but an estimate that is far from reality can distort or even invalidate the simulation results. Despite its importance, this information, especially the inertia, but also the stiffness and damping constant of the drive-train, is hardly available for the turbine model under investigation. In this work, the different bibliographical sources that provide values of blade inertia in kg·m2 will be reviewed, and above all, those that provide a distribution of masses along the span of the blade. With this, different reliable relations will be obtained that allow calculating the inertia of the turbine rotor, based on the mass and length of the blade. When the center of gravity is also available, a very correlated expression is provided to obtain the inertia. The even rarer references to the stiffness and damping constant of the drive-train will also be reviewed.

The aim of this review is to present the Quality by Design (QbD) model as a suitable methodology to perform research in the academic Costa Rican institutions that teach Pharmacy. Pubmed, Science Direct, and Google Scholar databases were screened for original and review papers, as well as short communications published not more than 10 years ago. Publications were screened by title and abstract. Relevant references were used to develop three important themes: The University’s Research Model in Costa Rica, QbD Model, and QbD as a Research Methodology for Industrial Pharmacy in the Academy. In this sense, the QbD model is a great methodology for carrying out research projects regarding Pharmaceutical Sciences but especially for Drug Development. Academic research based on this model enables training and developing practical, scientific, and leadership skills in pharmacy students. The generated knowledge can be shared in the classrooms, which represents an ideal environment to communicate their research results and to foster collaborative work between researchers, professors, and students. The participation of all these actors allows a high level of commitment to research work, which benefits the scientific advancement of the university and society. It is important to visualize the student body as potential key actors in the research process, encouraging in them the desire to become trained scientific researchers who want to pursue a career in the academy, giving continuity to it.

Asthma is a prevalent disease that around 300 million worldwide, resulting in substantial morbidity, mortality, and economic burden on a global scale. New clinical and laboratory research has shed light on the immunology causing asthma. Asthma is now recognized as a heterogeneous disease. A personalized medicine is based on the classification of asthma by endotype by linking observable characteristics to immunological mechanisms. Identifying endotype mechanisms is essential for better characterizing patients and personalizing therapeutic approaches with novel biological agents that target specific immune pathways. This article provides a summary of the major immunological mechanisms involved in the pathogenesis and emergence of the disease's phenotypic features, as well as the individualized treatment for severe asthma subtypes

In the same manner that there are several statements of the second law of thermodynamics but all of them are equivalent, it is possible that most of the entropic methods applied to the nervous system and brain in particular share a similar outcome, or essence, that helps understand some aspects of the fundamentals of basic neurodynamics. In this short review focused on certain aspects of the entropic metrics some results are examined that indicate the fundamental importance of the natural tendency towards a maximal energy distribution for healthy brain activity and thus cognition to emerge.

The increasing demand for sustainable products and services has become a constant requirement by the different stakeholders in an organization. Higher Education Institutions (HEI) have a crucial role in training conscious and competent professionals to lead these changes. Chemical analyses laboratories bring together the proper mix, where the adoption of mature and efficient management systems proves to be crucial not only to better train the institutions´ human resources but also to cooperate in recruiting research projects and other services to benefit society. Maturity models assist in the needed stages for sustainable growth to take place. This paper proposes a Maturity Model based on standardized norms to guide adjustments related to quality, risks, safety, and environment of chemical analyses laboratories in public higher education institutions. This research was done in four stages: theoretical research about Maturity Models, sustainability, and integrated management systems; survey with laboratories; case study at a chemical analyses laboratory of an HEI; and structuring and validating a maturity model. As a result of this, the model includes eight dimensions (Strategy, Leadership, Management, Operations, Continuous Improvement, Sustainability, Culture, and Integration), 31 subdimensions, and 204 management practices to assess and guide chemical analyses laboratories to sustainable maturity levels.

We investigate the behavior of the solutions of the ray equation in isotropic media. We discuss local and global transversals and wavefronts and give examples of rays without wavefronts.

The molecular evolution of medulloblastoma is more complex than was previously imagined as emerging evidence suggests that multiples interactions between the tumor cells and components of the tumor microenvironment (TME) are important for tumor promotion and progression. The identification of several molecular networks within the TME, which interact with tumoral cells, has provided new clues to understand the tumorigenic roles of many TME components as well as potential therapeutic targets. In this review, we discuss the most recent studies regarding the roles of astrocytes in supporting the sonic hedgehog (SHH)–activated medulloblastoma molecular subgroup, and provide an overview of medulloblastoma progression through SHH expression and signal transduction mechanisms into the complex tumor microenvironment. In addition, we highlight the associations between tumor and stromal cells as possible prognostic markers and new therapeutic strategies.

Bacteriocins is a term given to products of the secondary metabolism of many bacterial genera described today with antimicrobial activity. Although there are several biomolecules with such activity, even today it has not been possible to reach a consensus on the method of classification for these biomolecules. In addition, many of them are not authorized for therapeutic use against multi-drug resistant microorganisms due to possible toxic effects. However, recent research has achieved significant progress in their understanding, classification, and elucidation of the mechanisms of action against microorganisms of medical and biotechnological interest. Therefore, in more recent times, protocols are already being carried out for their optimal use and applications to use them on the hopes of solving multiple health and food conservation problems.

This document summarizes the evidence currently available about the effects of the anesthetic agents and techniques used in primary cancer surgery and long-term oncologic outcomes, and the biomolecular mechanisms involved in their interaction..

There is a recent growth and development with regard to the female athlete. This trend has been reflected in a greater concern for aspects such as nutrition, body composition and the health of female athletes, given the repercussion of these factors on their sporting performance. The aim was to carry out an anthropometric and nutritional assessment of elite Spanish female football athletes based on different biochemical parameters. Ethical consent was obtained from a total of 21 players from a Spanish elite women's football team(20-33years). Anthropometric analysis was carried out using the International Society for the Advancement of Kineanthropometry(ISAK). Clinical analyses were performed by the club's medical staff at the beginning of the season through serum and fasting urine samples taken by the players. The athletes presented fat% of 19.1(SD±2.89). 100% of the players had Mg values within the reference values. Values below reference values were observed for Hb (85.7%), vit.D (33.3%), ferritin (23.8%), serum iron (28.6%), transferrin (4.8%) and TSI (42.9%); and above for CK (42.9%), basal cortisol (38.1%), testosterone (19%) and creatinine, total cholesterol, iron, transferrin, TSI and serotonin (4.8%). Differences in Mg levels were only observed between playing positions (p&lt;0.05). There were associations between age and vit.D levels (r=0.607), and weight with vit.D levels (-0.464) and blood cholesterol (-0.487) among others. Given the nutritional knowledge of Spanish elite female football players, as well as the prevalence of deficiencies in iron metabolism parameters and vit.D levels in athletes, the need to implement a correct nutritional assessment and education in this type of athletes is highlighted

Celiac disease (CD) is a genetically conditioned autoimmune process that appears in susceptible people. It can affect people of any age, and slightly predominates in females. It has a fairly homogenous global distribution, with an average prevalence of 1-2%, the frequency having increased in recent decades. The only effective treatment is a strict and permanent gluten-free diet (GFD), although the level of compliance with it is poor, at about 50% of cases. To monitor the effectiveness of the GFD, several procedures involving various approaches are employed: a) periodic interviews by nutritionists; b) clinical follow-up; c) serological controls of specific antibodies; d) endoscopies with collection of duodenal biopsies; e) structured questionnaires; f) determination of gluten peptides derived from gluten in feces and/or urine. All of these procedures are useful when applied, alone or in combination, depending on the cases. Some patients will only need to consult to their doctors, while others will require a multidisciplinary approach to assess their compliance with the GFD. In children, normalization of duodenal mucosa was achieved in 95% of cases within 2 years, while it is more delayed in adults, whose mucosa take longer to heal completely.

We have modelled the energy consumption of prototype and real buildings under present and future climatic conditions with the EnergyPlus model to develop a better understanding of the relationship between changing climate conditions and energy demand. We have produced detailed meteorological information with 50 meters of spatial resolution through dynamical downscaling process combining regional, urban and computational fluid dynamics models which include the effects of the buildings on urban wind patterns. The city of Madrid has been chosen for our experiment. The impact on energy demand and their respective economic cost are calculated for year 2100 versus 2011 based on two IPCC climate scenarios, RCP 4.5 (stabilization of emissions) and RCP 8.5 (not reduction of emissions). Findings show that climate change will have a significant impact on the energy demand for buildings. Space heating demand will be increased by the RCP 4.5 and cooling demand will be increased for the RCP 8.5 in the analysed buildings.

Novel strategies have been developed to reduce or to avoid the intravitreal injections (IVTs) of the antiangiogenic (ranibizumab; RBZ) and the anti-inflammatory (triamcinolone acetonide; TA) agents used to treat vitreoretinal diseases. One of the strategies include liposomes. In this study, it was evaluated the safety and efficacy of topical triamcinolone-loaded liposomes formulation (TALF) as an adjuvant to intravitreal RBZ therapy in treatment-naive patients with neovascular age related macular degeneration (nAMD). Subjects were randomly assigned to the RBZ-TALF or the RBZ-pro re nata (RBZ-PRN) group. Patients from the RBZ-TALF group were instructed to apply TALF for a 12-month period after a single dose of RBZ. Patients from the RBZ-PRN group received three monthly RBZ-IVTs. Retreatment with RBZ was considered in case of nAMD reactivation. Related to safety, non-ocular abnormalities were observed during TALF therapy. Owing to the efficacy, non-significant differences are identified in visual acuity or central foveal thickness when the RBZ-PRN and RBZ-TALF groups are compared. Importantly the average number of RBZ injections was significantly lower in the RBZ-TALF group (2.5 ± 1.4 vs 6.1 ± 1.3 IVTs; p=0004). Therefore, TALF used as an adjuvant to RBZ reduce the number of RBZ-IVTs retreatment with optimal visual and anatomic results.

This paper presents the results of aerodynamical performance research focused on maintaining the thermal comfort and increasing the energy efficiency of a typical social housing unit located in a high-density urban area. Bioclimatic design strategies are used to develop a sustainable and economic technology in existing housing clusters in Mexico City. A full-scale prototype, built on campus facilities, was used to study the flow conditions around the design. All scaled prototypes implement similar criterion. Furthermore, a scaled prototype is evaluated within a low speed wind tunnel installation. Additionally, numerical simulations were performed at transient state based on previous physical measurements and historical local climatic conditions to determine preferable modifications.

Pseudo-nitzschia spp. blooms are a recurrent problem in many coastal areas globally imposing some significant threats to the health of human, ecosystems and economy. Monitoring programmes have been established, where feasible, to mitigate the impacts caused by Pseudo-nitzschia spp. and other harmful algae blooms. The detection of such blooms from satellite data could really provide timely information on emerging risks but the development of taxa-specific algorithms from available multispectral data is still challenged by coupled optical properties with other taxa and water constituents, availability of ground data and generalisation capabilities of algorithms. Here, we developed a new set of algorithms (PNOI) for the detection and monitoring of Pseudo-nitzschia spp. blooms over the Galician coast (NW Iberian Peninsula) from Sentinel-3 OLCI reflectances using support vector machine (SVM). Our algorithm was trained and tested with reflectance data from 260 OLCI images and 4607 Pseudo-nitzschia spp. match up data points, of which 2171 were of high quality. The performance of no bloom/bloom model in the independent test set was robust, showing values of 0.80, 0.72 and 0.79 for area under the curve (AUC), sensitivity and specificity, respectively. Similar results were obtained by our below detection limit/presence model. We also present different model thresholds based on optimisation of true skill statistic (TSS) and F1-score. PNOI outperforms linear models, while its relationship with in-situ chlorophyll-a concentrations is weak demonstrating poor correlation with the phytoplankton abundance. We showcase the importance of PNOI algorithm and OLCI sensor for monitoring the bloom evolution between the weekly ground sampling and during periods of ground data absence, such as due to Covid-19.

The Casiquiare River is a natural channel that connects two of the greatest rivers in the world, the Orinoco and the Amazon in the South American Continent. The aim of this paper is to present a review and synthesis of the hydrological and sedimentological knowledge of the Casiquiare River, including the first hydro-sedimentary balance of the Casiquiare fluvial system conducted at the bifurcation and at the mouth on September 9-12, 2000, during the expedition ‘Humboldt-Amazonia 2000’. Bathymetric, flow discharge and physico-chemical measurements were made at the inlet and at the outlet of the Casiquiare Channel. The main conclusions of this study indicate that Casiquiare is taking a significant proportion of flow (20 to 30%) from the Upper Orinoco basin to the Amazon basin. Throughout its 356 km-course, this chameleon channel undergoes significant morphological, hydrological and bio-geochemical variations between the inlet and the outlet, whose most visible witnesses are the increase in its width (3 to 4 times), flow (7 to 9 times) and its change in water color (white to black water), under the influence of tributaries coming from vast forest plains.

In some applications of microgrid and distributed generation, it is required to feed islanded or stand-alone loads with high-quality voltage to provide low total harmonic distortion (THD). To fulfil these demands, an LC filter is connected to the output terminals of power electronics converters. A cascaded voltage and current control loop with pulse-width modulation schemes are used to regulate the voltage and current in these systems. However, these strategies have some drawbacks, particularly when multiple-input multiple-output plants (MIMO) are controlled using single-input single-output (SISO) design methods. This methodology usually produces a sluggish transient response and cross-coupling between different control loops. In this paper, a model predictive control (MPC) strategy based on the concept of optimal switching sequences (OSS) is designed to control voltage and current in an LC filter connected to a three-level neutral-point clamped converter. The strategy solves two well-formulated optimisation problems to achieve control of the LC filter variables and the voltages of the DC-link capacitors. Hardware-in-the-Loop (HIL) results are obtained to validate the feasibility of the proposed strategy, using a PLECS-RT HIL platform and a DSP Microlab Box controller. In addition to the good dynamic performance of the proposed OSS-MPC, it is demonstrated by the HIL results that the control algorithm is capable of obtaining low total harmonic distortion (THD) in the output voltage for different conditions.

Jalapeño peppers (Capsicum annuum L.) are an important agricultural product worldwide. Despite its high demand in recent years, there are few studies on its production under adverse conditions caused by environmental phenomena. Crops in protected environments such as aeroponics offer greater control of these phenomena and enable efficient use of resources. However, it is necessary to validate the cultivation technique for which new technologies are being used. One of these is the analysis of images captured in the visible and near and far infrared spectrum which involves using non-invasive techniques in order to characterize the growth of a plant and diagnose if it presents any type of stress. This study presents the characterization of vegetative growth and fruiting of jalapeño pepper plants in an aeroponic system, where the root, leaf development parameters and fruits were measured in four jalapeño pepper crops through images of plants captured in the visible (VIS), near infrared (NIR) and far infrared (IR) spectrums. Four crops of thirty jalapeño pepper plants were sown to obtain a total of one hundred and twenty plants which were characterized in the different phases of growth and fruiting. Each of the four jalapeño pepper crops were monitored for sixty days in an aeroponic system in a greenhouse. The first crop was intended to carry out tests to establish the appropriate fertigation times, the next three crops were grown under favorable conditions. Algorithms were developed in Matlab to obtain, over ten image capture sessions, the morphometric and thermal parameters of the roots (perimeter, area, length and average temperature), plants (perimeter, area, height and average temperature), and fruiting. (yield and number of fruits). The statistical analysis was carried out using the ANOVA and Tukey tests considering a value of p ≤ 0.05. The results obtained indicate that there is no significant difference between the characterizations of the four crops. This statement is also supported by the visual analysis of the growth curves parameters of the four crops. In addition, the temperature inside the aeroponic system was contrasted with the ambient temperature and it was verified that the temperature to which the roots are exposed was in the range of 10°C – 20°C. The thermal analysis determined that a plant that presents water stress and is also exposed to high temperatures has an average leaf temperature of 3.7 to 5 °C above the optimal condition for the plant, while a plant with stress at normal temperatures was 1.3 °C higher than the plant without stress.

Introduction: Osteosarcomas of the jaw (OSJ) are rare tumors with a different behavior from osteosarcomas of other bones. This study aims to analyze the clinical, pathological, and therapeutic characteristics of this type of sarcoma. Methods: a retrospective observational study of cases diagnosed with OSJ registered at the “La Paz” University Hospital (Madrid). Results: Eight cases with a diagnosis of OSJ were obtained in a study period of 22 years (2000-2022). The mean age was 41 years. The distribution was 1:1 between the maxilla and mandible. Painful inflammation was the most frequent clinical manifestation. Conventional osteoblastic osteosarcoma was the most common. Survival at 5 years was 50%, while at 10 years, it decreased to 25%. Conclusions: OSJ differs from conventional osteosarcomas of long tubular bones. Surgery continues to be the mainstay of treatment; more studies are needed in which more standardized protocols can be proposed for adjuvant therapeutic management.

One of the non-linear phenomena that affect high bandwidth and long reach communication systems is the non-linear phenomenon called four-wave mixing (FWM). Unfortunately, the simulation of such systems aiming to obtain their design parameter limitations require more time as the number of channels increases. In this paper, we propose a new high-performance computational model to obtain optimal design parameters in a multi san Dense Wavelength Division Multiplexing (DWDM) system, limited by FWM and the intrinsic Amplified Spontaneous Emission (ASE) noise of optical amplifiers employed in each segment. The simulation in this work provides a complete optical design characterization and compares the efficiency and speed improvement of the proposed parallelization model versus a previous sequential model. Additionally, an analysis of the computational complexity of parallel model is presented, where two parallel implementations are used. First, Open Multi−Processing (OpenMP), based on the use of a central, multi-core processing unit is used and secondly the Compute Unified Device Arquitecture (CUDA), which is based on the use of graphics processing unit. Results show that parallelism improves to up to 40 times the performance of the simulation when nested parallelization with CUDA is used, over de sequential method and up to 6 times compared with the implementation with OpenMP using 12 processors. Within our parallel implementation, it is possible to simulate with an increased number of channels, that was unpractical in the sequential simulation.

The present article is dealing with the state of question about building-energy monitoring systems used for data collection to estimate the Heat Lost Coefficient (HLC) with existing methods and so determinate buildings’ Envelope Energy Performance (EEP). In addition, the data requirements of HLC estimation methods are related with commonly used methods for fault detection, calibration and supervision of energy monitoring systems in buildings. Based on an extended review of experimental tests since 1978, a qualitative and quantitative analysis of Monitoring and Controlling System (MCS) specifications has been carried out. Although most actual Buildings Automation Systems (BAS) may measure the required parameters, further research is still needed to ensure that these data are accurate enough to rigorously apply the HLC estimation methods.

In every agricultural setting, weed seeds can be found in every cubic centimeter of soil. Weed seeds, as a valuable trait underlying the fate of weed populations, exhibit differing levels of seed dormancy, ensuring their survival under uncertain conditions. Seed dormancy is considered as an innate mechanism that constrains germination under suitable conditions that would otherwise stimulate germination of non-dormant seeds. This work provides new insight into changes in germination patterns along the dormant to nondormancy continuum in seeds with physiological dormancy. Notable findings are: (1) germination synchrony can act as a new parameter that quantitatively describes dormancy patterns and subsequently weed population dynamics, (2) germination synchrony is dynamic, suggesting that the more dormancy decreases, the more synchrony is obtainable, (3) after-ripening and stratification can function as a synchronizing agent that regulates germination behavior. Brassica napus showed the most synchronous germination with the value of 3.14, while lower level of germination asynchrony was for Sinapis arvensis, with the asynchrony value of 2.25. After-ripening and stratification can act as a synchronizing factor through decreasing asynchrony level and increasing synchrony. Weed establish a firm relationship between dormancy cycling and germination synchrony patterns, ensuring their survival and reproductive strategies. By germinating in synchrony, which is accompanied by cycling mechanisms, weeds have more opportunities to persist. The synchrony model used in the present study predicts germination behavior and synchrony along the dormant to nondormancy continuum in weed seeds with physiological dormancy, suggesting a useful method for quantification of germination strategies and weed population dynamics.

Mexico´s inhabitants have approximately 7 million dogs and cats as pets, of which there is no accurate information about their environmental impacts as a result of their feeding and comfort requirements. The objective of this study is to compare the environmental footprint between a dog and a cat in a family environment. For this purpose, a life cycle analysis was performed including, among other factors, its feeding and waste management in one year of life. Different environmental indicators including the carbon footprint were considered. It was found that the equivalent CO2 emission of a dog is twice that estimated for a domestic cat and that the main contribution is due to the food production. The ecological footprint that is generated when satisfying the requirements for pet´s well-being impacts in the environment contributes primarily to the carbon footprint.

Significant problems have arisen in the last years, such as climate change, global warming, and hunger. These complications are correlated with the depletion and exploitation of natural resources and environmental contamination. Due to overcrowding, the list of challenges for the next few years is growing. A comprehensive approach was made to the agro-industrial production of Avocado (Persea americana) and the management of all its biomass waste. So, bioprocesses and biorefinery can be used to produce high added-value products. A large number of residues are composed of lignin and cellulose. They have many potentials to be exploited sustainably for chemical and biological conversion; physical, chemical, and natural treatments improve the following operations. There are some applications to many fields such as pharmaceutical, medical, material engineering, and environmental remediation. Possible pathways are mentioned to take advantage of Avocado as biofuels, drugs, bioplastics, and even in the environmental part and emerging technologies such as nanotechnology using bioprocesses and biotech. In conclusion, Avocado and its waste could be transformed into high value-added products in industries above to mitigate global warming and save non-renewable energy.

In this systematic review of the literature on using Machine Learning (ML) for credit risk prediction, we raise the need for financial institutions to use AI and ML to assess credit risk, analyzing large volumes of information. We posed research questions about algorithms, metrics, results, data sets, variables, and related limitations in predicting credit risk. We searched renowned databases to answer them and identified 52 relevant studies with the credit industry microfinance. Challenges and approaches in credit risk prediction using ML models we identified, difficulties with the implemented models such as the black box model, the need for explanatory artificial intelligence, the importance of selecting relevant features, addressing multicollinearity, and the problem of the imbalance in the input data. By answering the questions, we identified that the Boosted Category is the most researched family of ML models; the most commonly used metrics for evaluation are Area Under Curve (AUC), Accuracy (ACC), Recall, precision measure F1 (F1), and Precision; Research mainly uses public data sets to compare models, and private ones to generate new knowledge when applied to the real world. The most significant limitation identified is the representativeness of reality, and the variables primarily used in the microcredit industry are related data to the demographic, the operation, and payment behavior. This study aims to guide the developers of credit risk management tools and software towards the existing offer of ML methods, metrics, and techniques used to forecast it, thereby minimizing possible losses due to default and guiding risk appetite.

Our purpose is to address the biological problem of finding foundations of the organization in the collective activity among cell networks in the nervous system, at the meso/macroscale, giving rise to cognition and consciousness. But in doing so, we encounter another problem related to the interpretation of methods to assess the neural interactions and organization of the neurodynamics, because thermodynamic notions, which have precise meaning only under specific conditions, have been widely employed in these studies. The consequence is that apparently contradictory results appear in the literature, but these contradictions diminish upon the considerations of the specific circumstances of each experiment. After clarifying some of these controversial points and surveying some experimental results, we propose that a necessary condition for cognition/consciousness to emerge is to have available enough energy, or cellular activity; and a sufficient condition is the multiplicity of configurations in which cell networks can communicate, resulting in non-uniform energy distribution, the generation and dissipation of energy gradients due to the constant activity. These ideas may reveal possible fundamental principles of brain organization and how healthy activity may derive to pathological states.

We advance binational link-tracing sampling design, an innovative data collection methodology for sampling from transnational social fields, i.e., transnational networks embedding migrants and non-migrants. This paper shows the practical challenges of such a design, the representativeness of the samples and the qualities of the resulted networks. We performed 303 face-to-face structured interviews on sociodemographic variables, migration trajectories and personal networks of people living in a Romanian migration sending community (Dâmbovița) and in a migration receiving Spanish town (Castellón), simultaneously in both sites. Inter-connecting the personal networks, we built a multi-layered complex network structure embedding 4,855 nominated people, 5,477 directed ties (nominations) and 2,540 edges. Results indicate that the participants’ unique identification is a particularly difficult challenge, the representativeness of the data is not optimal (homophily on observed attributes was detected in the nomination patterns), and the relational and attribute data allow to explore the social organization of the Romanian migrant enclave in Castellón, as well as its connectivity to other places. Furthermore, we provide methodological suggestions for improving link-tracing sampling from transnational networks of migration. Our research contributes to the emerging efforts of applying social network analysis to the study of international migration.

Based on a measuring system to determine levels of spatial organization in 2D polygons (homogeneous or heterogeneous partition of defined areas) lying on principles of regularity, we propose the entropy term linked to the concept of “information”, from the “information theory field”, in order to obtain an information measurement regarding a quantity of or amount of information in the architecture of complex 2D biological organizations. The term “quantity” does not refer to the amount of data (size), but to the probability of a geometrical basic pattern within a set of possible statistical configurations regarding levels of homogeneity and heterogeneity. It is this notion of information that is important in information theory, and measures of information in units of bits, what we propose to use for measuring quantities of organization in the architecture of complex geometrical systems. Two complex systems are tested, biological and non biological in order to obtain experimental results, which are verified with the evaluation criteria “entropy”. Experimental results show that the lowest levels of information and entropy, in addition with low rates of heterogeneity and high rates of homogeneity are particular features of geometrical organizations in biological systems.

This paper presents a discrete compartmental Susceptible-Exposed-Infected-Recovered/Dead (SEIR/D) model to address the expansion of Covid-19 pandemic. When time passes, the status of the cells is determined by binary rules that update following both a neighbourhood and a delay pattern. The model assumes the environmental parameters have a crucial impact on the expansion of the disease so a grid is assigned to each parameter to model the single effect caused by this parameter. The expansion is then the weighted sum of all the grids. This proposal shows how the grid architecture, along with an update rule and a neighbourhood pattern is a valuable tool to model the pandemic expansion. This model has already been analyzed in previous works and compared with the corresponding continuous models solved by ordinary differential equations (ODE), coming to find the homologous parameters between both approaches. Thus, it has been possible to prove that the combination neighborhood-update rule is responsible for the rate of expansion and recovering/death of the illness. The delays (between Susceptible and Asymptomatic, Asymptomatic and Infected, Infected and Recovered/Dead) may have a crucial impact on both the peak of Infected and the Recovery/Death rate. This theoretical model has been successfully tested in the case of the dissemination of information through mobile social networks and in the case of plant pests.

This paper presents a methodology to calculate day-ahead wind speed predictions based on historical measurements done by weather stations. The methodology was tested for three locations: Colombia, Ecuador, and Spain. The data is input into the process in two ways: 1) as a single time series containing all measurements, and 2) as twenty-four separate parallel sequences, corresponding to the values of wind speed at each of the 24 hours in the day over several months. The methodology relies on the use of three non-parametric techniques: Least-Squares Support Vector Machines, Empirical Mode Decomposition, and the Wavelet Transform. Also, the traditional and simple Auto-Regressive model is applied. The combination of the aforementioned techniques results in nine methods for performing wind prediction. Experiments using a MATLAB implementation showed that the Least-squares Support Vector Machine using data as a single time series outperformed the other combinations, obtaining the least mean square error.

Nowadays, digitalization present in all links of the product life cycle and within product design, packaging is a critical element, as it affects the customer’s purchase intention, and therefore, it is one of the most important spaces where to include techniques and methods based on Industry 4.0 that obtain results from the user and bring them closer to the process. The relationship between packaging and the expected quality and emotions of users is a topic that is addressed in the social axis of sustainability and involves an effort to strengthen the relationship with the user. This article studies the expected quality of nougat packaging in terms of shape and colour using ANOVA analysis. For this purpose, a survey was carried out among 122 participants in Spain and Mexico. The main conclusion is that a packaging with the combination of three shapes (rectangle, square and triangle) and colours (yellow, orange and red) enhances consumers’ emotions of admiration, satisfaction, pleasant surprise, attraction, fascination and joy.

Over recent years, nanocarriers have played an ever-increasing role in clinical and biomedical applications owing to their unique physicochemical properties and surface functionalities. Lately, much effort has been directed towards the development of smart, stimuli-responsive nanocarriers that are capable of releasing their cargos in response to specific stimulus. These intelligent-responsive nanocarriers can be further surface-functionalized so as to achieve active tumor targeting in a sequential manner, which can be simply modulated by the stimuli. By applying this methodological approach, these intelligent-responsive nanocarriers can be directed to different target-specific organs, tissues or cells, and exhibit on-demand controlled drug release that may enhance therapeutic effectiveness and reduce systemic toxicity. Light, an external stimulus, is one of the most promising triggers for use in nanomedicine to stimulate on-demand drug release from nanocarriers. Light-triggered drug release can be achieved by light irradiation at different wavelengths, either in UV, visible or even NIR region, depending on the photophysical properties of the photo-responsive molecule embedded in the nanocarrier system, the structural characteristics and material composition of the nanocarrier system. In this review, we highlighted the emerging functional role of light in nanocarriers, with emphasis on light-responsive liposomes and dual-targeted stimuli-responsive liposomes. Moreover, we provided the up-to-date phototriggered targeting strategies and mechanisms of light-triggered drug release from liposomes and NIR-responsive nanocarriers. Lastly, we addressed the current challenges, advances, and future perspectives for the deployment of light-responsive liposomes in targeted drug delivery and therapy.

One of the biggest queries in cognitive sciences is the emergence of consciousness from matter. Modern neurobiological theories of consciousness propose that conscious experience is the result of interactions between large-scale neuronal networks in the brain, traditionally described within the realm of classical physics. Here, we propose a generalized connectionist framework in which the emergence of “conscious networks” is not exclusive of large brain areas, but can be identified in sub-cellular networks exhibiting non-trivial quantum phenomena. The essential feature of such networks is the existence of strong correlations in the system (classical or quantum coherence) and the presence of an optimal point at which the system’s complexity is maximized, expressed either by maximization of the information content in large scale functional networks or by achieving optimal efficiency through the quantum Goldilock effect.

Antisepsis of the hands of medical personnel is one of the most important steps in the process of patient care, since direct contact can cause the cross-transfer of potentially pathogenic microorganisms at surgical sites.This study aimed to analyze the prevalence of microorganisms on the hands of 131 surgeons in a university hospital before the surgical procedure. Swabs were collected from each clinician's hands before and after handwashing. The samples were placed in a transport medium and immediately delivered to a private Clinical Analysis Laboratory from São Luis-Maranhão. The microorganisms were identified by ionization source mass spectrometry and matrix-assisted laser desorption (MALDI-TOF), and antibiotic susceptibility tests (AST) were performed using the Vitek2 automated system. The results showed a high frequency (100%) of microorganisms before handwashing, but after surgical antisepsis, the rate dropped significantly (p&lt;0.05) to 27.5%. Gram-positive cocci and rods were the most common microbes, followed by gram-negative bacilli species. The effectiveness of hand antisepsis was 72.5%. The ideal would be 100% efficacy, that is, 0% microorganisms in all surgeons. It is logical that the presence of any organism, no matter how infrequent it may be, will always represent a great risk of postoperative infection for any patient.

Nowadays, the development or improvement of actuation mechanisms is a crucial topic for the achievement of dextrous manipulation using soft robots. Then, a primary target of research is the design of actuation and driving devices. Consequently, in this paper, we introduce a soft driving epicyclical mechanism that mimics human muscle behavior and fulfills motion requirements to achieve grasping gestures using a robotic finger. The prototype is experimentally assessed, and results show that our approach has enough performance for the implementation in grasping tasks. Furthermore, we introduce the basis for a new soft epicyclical mechanism merger with shape memory alloys to allow active stiffness control of the mechanism.

At least 15% of the population in the world has some type of disability. Unfortunately, this population has the problem of facing various accessibility barriers, to which technological barriers are also added. One of the most relevant obstacles is the one that arises as a result of the development of the technology itself when using the Information and Communication Technologies (ICT). Therefore, the objective of this article is to review the main uses of the Semantic Web tools and to group them together in order to be able to propose the design and construction of more personalized and flexible systems, which allows to help people with disabilities to perform some type of activity using ICT, in this way, knowledge can be modeled in different domains related to people who have some type of disability, using ontologies, and some ontological models can be reused for various types of disability depending on the case study. The usefulness of this study is to reveal that with the models presented, it is possible to construct a Meta ontology that includes some or all areas of disability.

Objective: Design and validate a wireless, low-cost, easy-to-use, mobile, dry-electrode headset for scalp electroencephalography (EEG) recordings for closed-loop brain-computer (BCI) interface and internet-of-things (IoT) applications. Approach: The EEG-based BCI headset was designed from commercial off-the-shelf (COTS) components using a multi-pronged approach that balanced interoperability, cost, portability, usability, form factor, reliability, and closed-loop operation. Main Results: The adjustable headset was designed to accommodate 90\% of the population. A patent-pending self-positioning dry electrode bracket allowed for vertical self-positioning while parting the user's hair to ensure contact of the electrode with the scalp. In the current prototype, five EEG electrodes were incorporated in the electrode bracket spanning the sensorimotor cortices bilaterally, and three skin sensors were included to measure eye movement and blinks. An accelerometer provides monitoring of head movements. The EEG amplifier operates with 24 bits resolution up to 500 Hz sampling frequency, and can communicate with other devices using 802.11 {b/g/n/WiFi}. It has high SNR and CMRR (121 dB and 110 dB, respectively), and low input noise. In closed-loop BCI mode, the system can operate at 40 Hz, including real-time adaptive noise cancellation and 512 MB of processor memory. It supports LabVIEW as backend coding language and JS, CSS, HTML as front-end coding languages, and includes training and optimization of Support Vector Machine (SVM) neural classifiers. Extensive bench testing supports the technical specifications and human subject pilot testing of a closed-loop BCI application to support upper-limb rehabilitation provides proof-of-concept validation for device use at both the clinic and at home. Significance: The low-cost, accessibility, usability, interoperability, and programmability of the proposed closed-loop BCI system provides a low-cost solution for BCI and neurorehabilitation research and IoT applications.

International research has highlighted the relationship between the physical environment of schools and the perceived well-being of different actors in the educational community. Although these studies pointed out a relationship between these variables, there is little research that delves into the nature and quality of this relationship. The present study aimed to analyse the mediating effect of the perception of the physical environment of the classroom (considering aspects such as lighting, acoustics, visibility, size, order, and aesthetic features) on the perception of school climate and subjective well-being of students in state-funded schools in Chile. A total of 19.567 students (48,77% female) between fifth and eighth grade from 425 vulnerable schools in Chile participated. Through a simple statistical mediation model, it was identified that the perception of the physical environment mediates about 50% of the total effect on subjective well-being and school climate (c' = 0.09 (0.01); p < 0.001). There is an urgent need to incorporate indicators and evaluations addressing the perceptions of the infrastructure and physical environment in schools, especially when this has been expressed as an explicit and historical demand of the Chilean student movements. This type of approach, including multiple factors, could favour a more articulated vision of the quality of the educational environment, contributing to the academic and emotional development of students.

In this article, we delve into the intricate behavior of electronic mechanisms underlying NMR magnetic shieldings, σ, in molecules containing heavy atoms such as cadmium, platinum, and mercury. Specifically, we explore PtXn^{−2} (X = F, Cl, Br, I; n = 4, 6) and XCl2 Te2 Y2 H6 (X = Cd, Hg; Y = N, P) molecular systems. It is known that the leading electronic mechanisms responsible for the relativistic effects on σ are well characterized by the linear response with elimination of small components model (LRESC). In this study, we present results obtained from the innovative LRESC-Loc model, which offers the same outcomes as the LRESC model but employs localized molecular orbitals (LMOs) instead of canonical MOs. These LMOs provide a chemist’s representation of atomic core, lone pairs, and bonds. The whole set of electronic mechanisms responsible of the relativistic effects can be expressed in terms of both non-ligand-dependent and ligand-dependent contributions. We elucidate the electronic origins of trends and behaviors exhibited by these di- verse mechanisms in the aforementioned molecular systems. In PtX4^{−2} molecules, the predominant relativistic mechanism is the well-established one-body spin-orbit (σ^SO(1) ) mechanism, while the paramagnetic mass-velocity (σ^Mv ) and Darwin (σ^Dw ) contributing mechanisms also demand con- sideration. However, in PtX6−2 molecules, the σ Mv+ Dw contribution surpasses that of the SO(1) mechanism, thus influencing the overall ligand-dependent contributions. As for complexes con- taining Cd and Hg, the ligand-dependent contributions exhibit similar magnitudes when nitrogen is substituted with phosphorus. The only discrepancy arises from the σ^SO(1) contribution, which changes sign between the two molecules due to the contribution of bond orbitals between the metal and tellurium atoms.

Several review articles about megachurch studies have been published recently concentrating their work on USA, Europe, and other parts of the world, with just a few references about Latin American megachurches. For that reason, this article aims to identify some of the characteristics of Latin American Evangelical megachurches by looking at relevant literature, especially that produced in the region, in Spanish and Portuguese, which is usually overlooked by researchers in Global North. Since this research field is still limited in Latin America, areas, where further work is necessary, are identified. Three general catalysts for the emergence of megachurches in the region, church growth methodologies, Pentecostalization, and theologies of growth, serve as guides to organize the review process. The discussion shows several potential areas of research in a variety of fields such as theology, ecclesiology, organizational theory, leadership, gender studies, and ethics, are proposed from the review.

Despite gender equality being present in the social and political sphere, we still encounter aspects that are characteristic of sexism. Such aspects impact upon gender inequality and different types of violence towards women. The present article aims to examine the behaviour of adolescents from Huelva with regards to ambivalent sexism towards women on social networks and their influence on health. Further, we seek to uncover adolescent’s perceptions with regards to gender differences in the use of social networks, the relationship between sexism and women's emotional well-being was observed. The study sample was formed by young people aged between 14 and 16 years who were residing in rural and urban zones in the south of Spain. A mixed methods approach was taken. At a quantitative level, a sample of 400 young people was recruited. These were administered a questionnaire about sexism which was composed of two scales and has been validated at a national and international level. At a qualitative level, the study counted on 33 young people who participated in in-depth discussions via interviews and discussion groups. The results showed that sexism emerges in adolescence in the analysed sample from the south of Spain. This favoured a digital gender gap and was reinforced through social networks such as Instagram and Snapchat. Rising awareness and a critical view of the aforementioned sexism was shown on the behalf of females, particularly those from urban backgrounds.

During the last decades West Nile Virus (WNV) outbreaks have continuously occurred in the Mediterranean area. In August 2020 a new WNV outbreak affected 71 people with meningoencephalitis in Andalusia and 6 more cases in Extremadura (south-west of Spain), causing a total of eight deaths. The whole genomes of four viral isolates were obtained and phylogenetically analyzed in the context of recent outbreaks. The Andalusian viral samples belonged to the lineage 1 and were relatively similar to previous outbreaks occurred in the Mediterranean region. Here we present a detailed analysis of the outbreak, including an extensive phylogenetic study.

In order to summarized the polygenic background of psychiatric diseases, polygenic risk scores (PRS) have been developed. Recently, PRS have been use to predict patients with higher comorbidities in psychiatric diseases, like dual diagnosis. PRS are principally derived in analysis of Caucasian and Asian populations, we are not aware of how this PRS could be applied in populations with high admixture. In order to explored this, the present work has the aim to analyzed if previous calculated PRS for psychiatric diseases could predict dual diagnosis in Mexican population, and also, if PRS calculation could be influenced by Mexican Amerindian (MA) global ancestry. We performed PRS calculation, using PRSice, with summary genome-wide association statistics previously published for psychiatric diseases, and also, performed Nagelkerke correlation test in order to established if PRS are correlated with dual diagnosis. We found that dual diagnosis could be predicted by major depressive disorder polygenic risk score. Nevertheless, schizophrenia polygenic risk score is highly correlated with global MA ancestry, independently of the schizophrenia diagnosis. Our results reinforced the notion that PRS calculation could be deviated by the MA global ancestry, nevertheless analysis on larger sample sizes are required in order to clarified this issue.

Formula feeding, as an alternative to breastfeeding, offers benefits such as convenience and consistent nutrition. Among the drawbacks of formula feeding, however, is potential dilution or concentration errors in the of formula during preparation that may lead to infant health issues. The present study aimed to investigate the accuracy of caregiver measurements as they prepared infant formula under multiple conditions, compared with manufacturer specifications. A diverse sample of caregivers (N = 84) participated in this cross-over experimental study. Participants hand-scooped infant formula powder and poured water to prepare 4oz and 7oz feedings, using both a standardized set of infant formula products and participants’ own products. Linear mixed effects models were used to estimate fixed effects of target amount (4oz versus 7oz) and products (participant versus researcher) on mean absolute percent error (MAPE) of measurement. Across all conditions MAPE was significantly greater for measuring powder than for water (9.0% vs. 4.4%; p&lt;0.001) with a combined powder and water MAPE at 13.0%. Greater measurement error was associated with the odd-sized 7oz preparation and participants’ own products. We observed considerable variability and substantial error during infant formula preparation, particularly for hand-scooping of powder, which tended toward higher values than the theoretical gold standard.

This work presents an innovative application of optimal control theory to the strategic scheduling of battery storage in the day-ahead electricity market, with a focus on enhancing profitability while factoring in battery degradation. The study incorporates in the optimisation framework the cost of battery capacity degradation, the effects of capacity degradation and internal resistance degradation into dynamics. We employ a continuous-time representation of the dynamics, in contrast with many other studies that use a discrete-time approximation with rather coarse intervals. We adopt an equivalent circuit model coupled with empirical degradation parameters to simulate a battery cell’s behaviour and degradation mechanisms with good support from experimental data. Utilising direct collocation methods with mesh refinement allows for precise numerical solutions to the complex, nonlinear dynamics involved. Through a detailed case study of Belgium’s day-ahead electricity market, we determine the optimal charging and discharging schedules under varying objectives: maximizing net revenues, profits considering capacity degradation, and profits considering both capacity degradation and internal resistance increase due to degradation. The results demonstrate the viability of our approach and underscore the significance of integrating degradation costs into the market strategy for battery operators, alongside its effects on the battery’s dynamic behaviour. Our methodology extends previous work by offering a more comprehensive model that empirically captures the intricacies of battery degradation, including a fine and adaptive time domain representation, focusing on the day-ahead market, and utilising accurate direct methods for optimal control. The paper concludes with insights into the potential of optimal control applications in energy markets and suggestions for future research avenues.

This works is related to the modeling of cellulose pyrolysis with a pseudo equilibrium approach. The objective is to model the kinetics of the cellulose pyrolysis with a semi-global mechanism obtained from the literature, in order to obtain the yield and the rate of formation of char. The pseudo equilibrium sense consists in the supposition that the solid phase devolatilization can be described kinetically - at finite rate - , preserving the competitive characteristic between the production of char and tar, while the gas phase can be described by means of chemical equilibrium. A set of ordinary, linear and non linear, differential equations was obtained and solved numerically with a simple but consistent scheme using the Totally Implicit Euler method. Chemical equilibrium was solved using CANTERA coupled with a code written in Matlab. Results showed that the scheme preserve the tar-gas competitive characteristic for cellulose pyrolysis. The gas phase, is defined as a mixture of CO₂, CO, H₂O, CH₄, H₂ and N₂ showed similarly composition compared with models from literature. Finally, the extension of the model to biomass in general, is straightforward, in order to include the hemicellulose and lignin.

This paper presents a state machine based architecture which enhances flexibility and reusability of industrial robots, more concretely dual-arm multisensor robots. The proposed architecture, in addition to allowing absolute control of the execution, eases the programming of new applications by increasing the reusability of the developed modules. Through an easy-to-use graphical user interface, operators are able to create, modify, reuse and maintain industrial processes increasing the flexibility of the cell. Moreover, the proposed approach is applied in a real use case in order to demonstrate its capabilities and feasibility in industrial environments. A comparative analysis is presented for evaluating presented approach versus traditional robot programming techniques.

In this work, we propose an easy and a low cost method for the synthesis of Nitrogen-Doped Graphene NDG and its silver nanowires NW functionalization NWGN. The synthesis was performed using the improved graphene oxide method, chemical reduction of graphene oxide in the presence of caffeine as green nitrogen source and the subsequently the silver nanowires growth in the surface, by the chemical reductions salts in the presence of NG. Achieving a homogeneous growing (coating) of graphene sheets. The samples were analyzed using conventional characterization techniques: SEM-EDX, XRD, FT-IR, RAMAN, TEM, HRTEM, STEM and XPS.

The unfolded band structure and optical properties of Cu-doped KCl crystals were computed by first principles within the framework of density functional theory, implemented in the ABINIT electronic structure package utilizing pseudopotential approximation and a plane-wave basis set. From a theoretical point of view, Cu substitution into pristine KCl crystals requires calculation by the supercell (SC) method. This procedure shrinks the Brillouin zone, resulting in a folded band structure that is difficult to interpret. To solve this problem and gain insight into the effect of copper ions (Cu+) on electronic properties, the band structure of SC KCl:Cu was unfolded to make a direct comparison with the band structure of the primitive cell (PC) of pristine KCl. To understand the effect of Cu substitution on optical absorption, we calculated the imaginary part of the dielectric function of KCl:Cu through a sum-over-states formalism and broke it down into different band contributions by partially making an iterated cumulative sum (ICS) of selected valence and conduction bands. Consequently, we identified those interband transitions that give rise to the absorption peaks due to the Cu+ ion. These transitions involve valence and conduction bands formed by the Cu-3d and Cu-4s electronic states

Intravitreal injections (IVTs) of corticosteroids as triamcinolone acetonide (TA) are frequently used for the treatment of many vitreous and retinal disorders. However, IVTs are related to severe ocular complications. Lately, a topical ophthalmic TA loaded liposomes formulation (TALF) was designed to transport TA into the posterior segment of the eye when instilled in the ocular surface. To evaluate the safety, tolerability, and biologic activity of TALF, an animal study and a phase I clinical assay was performed. Moreover, four patients with diabetic macular edema (DME) were treated with TALF in order to explore the biologic activity of the formulation. No inflammation, lens opacity, swelling or intraocular pressure rising were recorded after the instillation of TALF in any of the animal or clinical study. Mainly, mild and transient adverse events such as dry eye (30%) and burning (30%) were reported. TALF improves significantly visual acuity and diminishes central foveal thickness in patients with DME. The current data demonstrate the safety, tolerability, and biologic activity of TALF. It seems that TALF can be used topically to treat vitreous and retinal diseases that respond to TA such as DME, avoiding the use of corticosteroids IVTs and its associated hazards.

innate and adaptive immune responses lead to wound healing by regulating a complex series of events promoting cellular cross-talk. An inflammatory response is presented with its characteristic clinical symptoms: heat, pain, redness, and swelling. Some smart thermo-responsive polymers like chitosan can be used to create biocompatible and biodegradable scaffolds with 3D architectures similar to human structures, allowing their efficient and safe use as tissue engineering and drug delivery systems in chronic wounds. Locally heated tumors above polymer lower critical solution temperature can induce its conversion into a hydrophobic form, enhancing drug release until the thermal stimulus is gone, where a lower release is due to the swelling of the material. This paper integrates the relevant reported contributions of bioengineered scaffolds for thermo-responsive drug delivery in wound healing. Therefore, we present a comprehensive review that aims to demonstrate the capacity of these systems to provide spatially and temporally controlled release strategies for one or more drugs used in wound healing. In this sense, the novel manufacturing techniques of 3D-printing and electrospinning are explored for the tuning of their physicochemical properties to adjust therapies according to the patient’s convenience, as well as reduce drug toxicity and side effects.

Regionalization of food systems for shortening supply chains and developing local agriculture to feed city-regions presents particular challenges for food planning and policy. Existing foodshed approaches enable to assess the theoretical capacity of food self-sufficiency of a specific region, but they struggle to consider the diversity of existing crops in a way that could be usable for informing decisions and support urban food strategies. Most studies are based on the definition of the area required to meet local consumption, obtaining a map represented as an isotropic circle around the city, without considering the site-specific pedoclimatic, geographical and socio-economic conditions, which are essential for the development of local food supply chains. In this study we propose a first stage to fill this gap by combining the Metropolitan Foodshed and Self-sufficiency Scenario (MFSS) model, which already considers regional yields and specific land use covers, with spatially explicit data on cropping pattern, soil and topography. We use European-wide available data and apply the methodology in the city-region of Avignon (France), initially considering a foodshed with a radius of 30 Km. Our results show that even though a theoretical high potential self-sufficiency could be achieved for the whole food commodities consumed (>80%), when considering the specific pedological conditions of the area, this could be suitable only for domestic plant-based products, whereas for animal products an expansion of the initial foodshed to a radius of 100Km was required to provide >70% of self-sufficiency. We conclude that it is necessary to shift the analysis from the size assessment to the commodity-group specific spatial configuration of the foodshed based on biophysical and socio-economic features, and discuss avenues for further researches enabling to develop a foodshed assessment as a complex of complementary pieces: the foodshed archipelago.

Intraband energy transitions of an electron in GaAs/AlGaAs hexagonal quantum well wires in the presence of external electric and magnetic fields are presented. We consider the effects of the revolve of the quantum well wires via a geometric factor that converts the quantum wires straight and symmetric with respect to the z−axis, into a curved wires that no longer has this symmetry. In addition, the influence of having a shallow donor impurity on (off) is calculated. The shape of this quantum string corresponds to the core/shell structure. The energy levels and wave functions of the electron in the heterostructure with a finite potential between the shells are calculated using the effective mass approximation and the finite element method. The calculations of the optical properties are obtained from the compact density matrix and an iterative method. The direction of the applied external fields is parallel (anti-parallel) to the z−direction. The results reveal a significant dependence of the physical properties calculated with the deformation parameter, the dimensions of the quantum well wires and the presence or not of the impurity. The electronic transitions are in a range between 4.90 meV to 41.50 meV under the effect of the electric field, this corresponds to a range of frequencies of optical responses between 1.20 to 10 THz, that is, the mid-infrared. For the magnetic field the range is between 1.24 meV to 14 meV, that is, in frequencies from 0.36 to 3.38 THz, that is, in the far-infrared.

The objective of this work is to study the physical and mechanical behavior of concrete with the addition of 0.5% and 1.0% of coconut fibers subjected to two chemical treatments in order to reduce their degradation and optimize their use in the elaboration of concrete specimens, which must comply with the standards of the American Society for Testing of Materials (ASTM), the American Concrete Institute (ACI) and the Instituto Ecuatoriano de Normalización (INEN). The coconut fibers were obtained from the raw material by hand and cut to a length of 4 cm. Subsequently, the coconut fibers were subjected to two chemical treatments: The first treatment is the immersion of the coconut fibers in 4% sodium hydroxide (NaOH) solution and the second treatment, the coconut fibers were immersed in gum arabic to consequently coat them with silica fume. A particular dosage was carried out with a proportion of 0.5% and 1.0% volume of coconut fiber for the two chemical treatments, replacing the volume of coarse aggregate. Simple concrete joists were made without fiber and with the post-treatment coconut fibers, which were subjected to flexural tests. The results indicated that the best chemical treatment is sodium hydroxide with a concentration of 4% and 1.0% coconut fiber for strengths of 210 kg/cm² and 240 kg/cm². In general, the joists with coconut fiber treated with sodium hydroxide outperformed the fibers treated with gum arabic and silica fume.

This article discusses the use of a hand held electronic nose to obtain information on the presence of some aromatic defects in natural cork stoppers, such as haloanisoles, alkylmethoxypyrazines and ketones. The proposed prototype has been developed as an instrumentation system with up to eight commercial gas sensors. Machine learning algorithms such as k-nearest neighbors and artificial neural networks has been used. The use of this system tries to improve the current aromatic defect detection process in the cork stopper industry, which is done by gas chromatography or human test panels.

Thermostatically controlled loads have great potential to make a significant contribution to improving energy efficiency in the building sector, which is responsible for 40% of greenhouse gas emissions in the EU. This, in addition to the environmental damage, represents a huge expense in the electricity bill. Therefore, it is very important to train engineers on how to design energy management systems for TCLs. With this goal in mind, it would be very useful to have a simulation-based educational tool (SBET) to understand thermostatically controlled loads, their characteristics and possibilities in energy efficiency. In addition, it would be very useful if this tool could be introduced in engineering curricula to help students to be better trained and enter the labor market with more opportunities. Based on the shortcomings detected, this work develops a SBET specifically designed to teach about TCLs (SBET-TCLs), both about their intrinsic characteristics and their better management. To verify the developed SBET-TCL, it has been tested in a real scenario: A survey was carried out among the students of the subject 'Alternative Energy Sources' of the degrees of Industrial Engineering. The results show that the use of SBET-TCL has very positive effects on the learning process.

Background: One of the main diseases of worldwide concern is non–insulin dependent Diabetes mellitus. 90-95% of patients with diabetes suffers from Type II diabetes, a metabolic diabetes whose prevalence is increasing in the world.Given the current prevalence of diabetes type II in society, research of natural compounds able to regulate glycaemia and insulin–resistance is nowadays covering importance, as alternative or co–adjuvant treatment to existing hypoglycaemic medicines. In pre–clinical steps of research, C. elegans is considered a promising in vivo model for the study of the molecular mechanism of glucose as part of anti–diabetic bioactivity.Most of the studies of insulin resistance with this in vivo model are carried out by using mutant strains such as daf-2 and the effects of the compounds are attributed a posteriori, after a physiological response of the worms rather than directly measuring preservation of activity inside the worm. Methods: The in vitro α-glucosidase inhibition of two oral formulations with Origanum vulgare extract before and after a simulated process of gastrointestinal digestion was evaluated. After confirming the in vitro activity, the α-glucosidase inhibition was tested in vivo through the new method proposed. Results: The crude extract showed an IC50 value similar to acarbose (positive control), before and after the gastrointestinal digestion. The encapsulated extract (111.86±1.25 µg/mL) did not present statistical differences with the positive control (110.10±1.15 µg/mL) after digestion. However, the powder formulation showed the highest hypoglycaemic activity (59.55±0.85 µg/mL).In vivo, the IC50 values showed similar profile than in vitro. Conclusion: A new simple and reliable method has been developed to determine pharmacological activities inside in vivo model C. elegans.The method has been evaluated with a hydroalcoholic extract of O. vulgare. The method is accurate and valid for the quantification of the inhibition of in vivo, allowing the direct attribution of this in vivo hypoglycaemic activity to the treatment. In addition, it opens the door to further research into in vitro pharmacological activities that require an in vivo counterpart.

The development of the smart city concept and the inhabitants’ need to reduce travel time, as well as society’s awareness of the reduction of fuel consumption and respect for the environment, lead to a new approach to the classic problem of the Travelling Salesman Problem (TSP) applied to urban environments. This problem can be formulated as “Given a list of geographic points and the distances between each pair of points, what is the shortest possible route that visits each point and returns to the departure point?” Nowadays, with the development of IoT devices and the high sensoring capabilities, a large amount of data and measurements are available, allowing researchers to model accurately the routes to choose. In this work, the purpose is to give solution to the TSP in smart city environments using a modified version of the metaheuristic optimization algorithm TLBO (Teacher Learner Based Optimization). In addition, to improve performance, the solution is implemented using a parallel GPU architecture, specifically a CUDA implementation.

The presence of heavy metals in cocoa crops is currently a serious problem for farmers and producers in various regions of Peru. Exports of cocoa and its derivatives to European markets are threatened by possible indications of contamination of heavy metals such as Cadmium (Cd) in cocoa beans for export, some at levels higher than those allowed by food regulations established by European Community, which are oriented to consumer protection. The possible sources of cadmium contamination in cocoa crops can be due to natural activities, such as volcanic activities, erosion processes and sedimentation in rocks that contain minerals with a high content of heavy metals (Greenockite, Burnsite, Hawleite, among others), and by anthropogenic activities such as: mining of associated deposits, agriculture (use of fertilizers), smelting of minerals and burning of fossil fuels. Currently, there is no information about contents of heavy metals in areas located in The Campo Verde-Honoria-Tournavista corridor (Ucayali Region and Huanuco Region), due to this, in this work we make a study of this region. A methodology will be used to take cocoa samples from the seed and soil in these areas, and then through chemical analysis, determine the concentrations of heavy metals, using an atomic absorption spectrophotometer. As a consequence of this study, we determined and concluded that the concentrations of cadmium obtained in soils are slightly higher than European standards allowed. Therefore, with this information we prepare a geochemical cadmium map in soils for the study area, which will help cocoa producers to identify areas that exceed the allowed cadmium values, in order to comply with standards that European Community demands in relation of concentration levels of heavy metals (Cadmium) in chocolate. In this way, we can carry out in the future a mitigation plan for areas with cadmium problems, which allows to reduce their content in order to export the product without any problem. .

Membracis mexicana (Hemiptera: Membracidae) is distributed in four biogeographic provinces of Mexico, field observations indicate that there are different forms of this species but so far it has not been recorded how the different forms are and how they are distributed. The aim of this study was to quantify the phenotypic and genetic variation of M. mexicana and determine if the config-uration of biogeographic provinces impacts the distribution of this variation. To do this we ana-lyzed 307 photographs using 19 landmarks and geometric morphometrics to quantify the pheno-typic variation in helmets. We sequenced five molecular markers for 205 individuals to describe the phylogeographic pattern. As a result, we identified three morphological configurations of the helmet of M. mexicana and two genetic lineages. The morphotypes are 1) large and wide helmet with small dorsal spots, 2) small and narrow helmet with large dorsal spots, and 3) small and narrow helmet with small spots. Genetic lineages are distributed at southeast and western of Mexico. The western lineage corresponds to two helmet morphotypes (1 and 2) and the southeast lineage to morphotype 3. We found that the larger helmets correspond the western lineage and are distributed in Transmexican Volcanic Belt and Pacific lowlands provinces whereas the smallest helmets correspond to the southeast lineage and are present in Veracruzan and Yucatan Peninsula provinces.

Background: Cutaneous squamous skin cell carcinoma (SCC) is the second most frequent type of non- melanoma skin cancer and the second cause of death by skin cancer in caucasian population. However, at present it is difficult to predict patients with worst SCC prognosis. Objective: To identify proteins whose expression level could predict SCC infiltration in SCC arising from actinic keratosis (AC). Methods: A total of 20 biopsies of 20 different patients were studied, 10 were from SCC-AK samples and 10 from normal skin. Early infiltrated SCC-AK were selected on histological examination and to determine the expression of proteins fresh skin samples were processed by 2DE-electrophoresis Results: The expression levels of three proteins namely alpha-hemoglobin, heat shock protein (Hsp)-27 and 70 were significantly increased in SCC-AK samples with respect to normal control skin. However, only the expression level of Hsp70 protein positively correlated with the level of SCC-AK dermis infiltration. Immnunohistological examination suggested that the increased expression of Hsp70 proteins seems to mainly occur in the keratinocytes cytoplasm. The increased cytoplasmic Hsp70 expression in SCC-AK was confirmed by Western-blot experiments. Conclusion: Cytoplasmic expression of Hsp70 could be potential biomarker of early infiltration of SCC arising from an AK. Keywords: actinic keratosis, cutaneous squamous cell carcinoma; cytoplasm, skin cancer; heat shock protein.

Pancreatic cancer leads the most common lethal tumor in America. This lethality is related to limited treatment options. Conventional treatments involve a non-specific use of chemotherapeutical agents like 5-FU, capecitabine, gemcitabine, cisplatine, oxaliplatine, or irinotecan, that produce several side effects. This review we focus on the use of targeted nanoparticles as an alternative to the standard treatment for the pancreatic cancer. The principal objective of the use of nanoparticles is the reduction in side effects that conventional treatments produce, mostly because of their nonspecificity. Currently, several molecular markets of pancreatic cancer cells have been studied to target nanoparticles and improve the actual treatment. Therefore, properly functionalizated nanoparticles with specific aptamers or antibodies can be used to recognize pancreatic cancer cells and once cancer is recognized, these nanoparticles can attack the tumor by drug delivery, hyperthermia, or gene therapy.

The introduction of exoskeletons in the industry has focused on improving worker safety. Exoskeletons have the objective of decreasing the risk of injury or fatigue when performing physically demanding tasks. The exoskeleton’s effects on the muscles is one of the most common focus in the assessments. The present study aims to analyse the muscle interactions generated by using a passive lumbar exoskeleton during load-handling tasks in laboratory conditions with and without an exoskeleton. Electromyographic data of the muscles involved in the task were recorded from twelve participants performing load-handling tasks. Correlation Coefficient, Coherence Coefficient, Mutual Information, and Multivariate Sample Entropy were calculated to determine if there were significant differences in muscle interactions between the two test conditions. Results showed statistically significant differences for all pairs of muscles and indicated that the use of the exoskeleton implied more constant values throughout the exercise. The Directed Conditional Granger Causality was obtained to study the directionality of the interactions, with significant differences in two muscle pairs Gluteus-Quadriceps and Gluteus-Lumbar in the gravity-positive direction in both cases. In conclusion, EMG parameters chosen appear to be appropriate measurements for studying the exoskeleton effects over muscle couplings.

Over the past 30 years, the use of field spectroscopy has risen in importance in remote sensing studies for the characterization of the surface reflectance of materials in situ within a broad range of applications. Potential uses range from measurements of individual targets of interest (e.g. vegetation, soils, validation targets etc.), to characterizing the contributions of different materials within larger spatially-mixed areas as would be representative of the spatial resolution captured by a sensor pixel (UAV to satellite scale). As such, it is essential that a complete and rigorous assessment of both the data-acquisition procedures, and the suitability of the derived data product be carried out. The measured energy from solar-reflected range spectroradiometers is influenced by the viewing and illumination geometries and the illumination conditions which vary due to changes in solar position and atmospheric conditions. By applying corrections, the estimated absolute reflectance (Rabs) of targets can be calculated. This property is independent of illumination intensity or conditions and is the metric commonly suggested to be used to compare spectra even when data are collected by different sensors or acquired under different conditions. By standardizing the process of estimated Rabs, as is provided in the described toolkit, consistency and repeatability in processing are ensured and the otherwise labor intensive and error-prone processing steps are streamlined. The resultant end data product (Rabs) represents our best current effort to generate consistent and comparable ground spectra which have been corrected for viewing and illumination geometries as well as other factors such as the individual characteristics of the reference panel used during acquisition.

Digital twins are an emerging technology that could be harnessed for the digitalization of the industry. Steel industry systems contain a large number of electro-hydraulic components, as proportional valves. An input-output model for a novel water proportional cartridge valve is derived from physical modelling based on fluid mechanics, dynamics, and electrical principles. The valve is a two-stage valve with two 2/2-way water proportional valves as the pilot stage and a marginally stable poppet-type cartridge valve as the main valve. The orifice equation, which is based on Bernoulli principles, is approximated by a polynomial which makes parameter estimation easier and makes modelling possible without measuring pressure of the varying control volume situated in the pilot stage part of the valve. Data were collected when the valve was operating as a component in a closed-loop system as part of a press-mill machine in a steel manufacturing plant. Parameter estimation was made by convex optimization with physical constraints to overcome problems caused by poor system excitation. For comparison, a simple linear model was derived and the least squares method used for parameter estimation. A thorough estimation of the parameters relative errors is presented. The model contains 5 parameters related to the design parameters of the valve. The modelled position output is in good agreement with experimental data for training and test data. The model can be used for real time monitoring of the valve’s status by the model parameters. One of the model parameters varies linearly with production cycles. Thus, aging of the valve can be monitored.

Ever since the Cadastre and Land Registry have existed in Spain, they have been completely separate organisations with very different objectives, which influence the real-estate reality. Their coordination is essential to better identify buildings and to more suitably render services to citizens and Administrations. To this end, Law 13/2015 was passed in 2015 for this desirable and pressing Cadastre-Land Registry coordination to come about. This law came into force on 1 November 2015, and coincided with the development of the technical aspects of the graphical information exchange among the Cadastre, Land Registries and Notaries. Several ministries and different organisations, like the Cadastre personnel, jurists, technicians, and even citizens, are implied in this law. Among the technical aspects, georeferenced graphical representations and GML exchange files adapted to the European INSPIRE directives stand out. Such technical aspects are a genuine revolution as they were transferred to the legal world. After more than 2 years after its application, it is still in its initial and adaptation stages because it is a long-standing law that allows land registry units-cadastral parcels to be coordinated while they are incorporated into real-estate trade.

Over the years, various models have been developed in the stages of the mining process that have allowed predicting and enhancing results, but it is the breakage the variable that connects all the activities of the mining process from the point of view of costs (drilling, blasting, loading, hauling, crushing and grinding). To improve this process, we come up with an idea to develop a breakage prediction model; on the basis of the main variables involved in the drilling and blasting process. For this purpose, we design a computer model based on an Artificial Neuronal Networks (ANN), built by using the most representative variables that come into play with drilling and blasting, such as: the properties of the explosives, the geomechanical parameters of the rock mass, and the design parameters of drilling-blasting. For its experimentation and validation, we have taken the data from a copper mine as reference located in the north of Chile, because of we have the dataset of that ore deposit, which is valid and reliable to evaluate prediction problems based on ANN applied to copper mines. The ANN architecture was of the supervised type, feedforward, with 3 layers and 13 neurons in the only hidden layer, trained with the input data using a dataset with the previously mentioned variables, which then were compared with the breakage results. The model was feed backed in its learning process until it becomes perfected, and is a prediction option that can be used in future blasting of ore deposits with similar characteristics using the same representative variables. Therefore, this is a valid alternative for predicting rock breakage, given that it has been experimentally validated, and has achieved moderately reliable results, providing higher correlation coefficients than traditional models, and with the additional advantage that an ANN model provides, due to its ability to learn and recognize compiled dataset patterns. In this way, using this computer model we can obtain satisfactory results that allow us to predict breakage, providing an alternative for evaluating the costs that this entails.

A frequent problem in Geotechnics is the soils with inadequate physical-mechanical properties before the efforts to which they will be subjected by the constructions, incurring cost overruns caused by their engineering improvement. The need to improve the engineering properties of soils is not recent, currently observing that the most common alternatives are binders such as cement and lime. The climate change observed in recent decades and the uncontrolled emission of greenhouse gases have motivated Geotechnical and Geoenvironmental researchers to seek mechanisms for soil reinforcement from a more sustainable and environmentally friendly approach by proposing the use of recycled and waste materials. An alternative is natural fibers, which can be obtained as waste from many agro-industrial processes, implying their high availability and low cost. Sawdust as a by-product of wood processing has a rough texture that can generate high friction between the fiber and the matrix of the soils, leading to a significant increase in its shearing strength and bearing capacity. This concept of improving the properties of soils using natural fibers distributed randomly is inspired by the natural phenomenon of grass and/or plants that when growing on a slope can effectively stabilize a said slope.

(1) Background: Foot strike pattern and cadence are two important variables that are related to sport performance and injury risks; the objective of this study is to analyse the foot strike pattern and cadence of the male elite athlete that participated in the Tokyo Olympic Games marathon. (2) Methods: Two independent researchers analysed the foot strike pattern of the first 51 participants in the 5km, and the cadence of the finalists in three different segments of the race. Descriptive statistics were presented for the main variables of this study. A repeated measures ANOVA was used to study the differences in cadence between different sections of the race (p&lt;0.05). (3) Results: Average of the cadence of the eight finalists was 185.5 steps per minute (SD ± 5.1). No differences between sections of the race were found. The more most common foot strike pattern was midfoot strike pattern, followed by rearfoot strike pattern, and forefoot strike pattern. The results of cadence are in line with previous studies that analysed elite athletes, with the values being higher than other research involving recreational runners. (4) Conclusions: elite marathon runners mostly run with a running non-rearfoot strike pattern and a cadence of over 185 steps per minute.

Artificial Intelligence are creating a paradigm shift in health care, being phenotyping patients through clustering techniques one of the areas of interest. Objective: To develop a predictive model to classify heart failure (HF) patients according to their left ventricular ejection fraction (LVEF), by using available data in Electronic Health Records (EHR). Subjects and methods: 2854 subjects more than 25 years old with diagnose of HF and LVEF measured by echocardiography were selected to develop an algorithm to predict patients with reduced EF using supervised analysis. Performance of the algorithm developed were tested in heart failure patients from Primary Care. To select the most influencing variables, LASSO algorithm setting was used and to tackle the issue of one class exceed the other one by a large proportion we used the Synthetic Minority Oversampling Technique (SMOTE). Finally, Random Forest (RF) and XGBoost models were constructed. Results: Full XGBoost model obtained the maximized accuracy, a high negative predictive value and the highest positive predictive value. Gender, age, unstable angina, atrial fibrillation and acute myocardial infarct are the variables that most influence FE value. Applied in the EHR data set with a total 25594 patients with an ICD-code of HF and no regular follow-up in Cardiology clinics, 6170 (21.1%) were identified as those pertaining to the reduced EF group. Conclusion: The algorithm obtained is able to rescue a number of HF patients with reduced ejection fraction that can be take benefit for a protocol with strong recommendation to succeed. Furthermore, the methodology can be used for studies with data extracted from the Electronic Health Records.

Ecuador has 4000 Km2 of volcanic nanoclay reserves that could be industrialized. An immediate application is to modify the local AC-20 asphalt with this aggregate. This resource was characterized with FTIR, XRD, FRX, SEM, BET, Laser Granulometry, SPECMIN, TSG, TGA, DTG, DSC and Atmospheric Adsorption. FTIR showed vibration peaks Si and Al. X-ray diffraction indicated the presence of silicates and alumina, BET measured particle size (30 to 250 nm), and the SSA property measured the specific surface area (280.38 m2/g). Chip rock (natural clay) was treated with H2O2 or NaOH or NH3 and evaluated with SPECMIN -TSG obtaining spectra close to vermiculite, allophane and bentonite minerals. At 1000 °C additional samples were calcined in Thermogravimetry (TGA), Differential Thermogravimetry (DTG), Differential Thermal Analysis (DCS), with mass loss around 40%, corresponding to organic matter, hydroxyl (OH) and destruction of its structure with spicule formation at 956 °C. With the DSC there were endothermic and exothermic manifestations. The Si/Al layers would have micro and meso porosity, it was also found to be a nanoparticulate material, with high adsorption capacity. At temperatures above 350 °C, its structure collapsed. Thus, this synthesized nanoclay will be used as an additive to form new materials.

The aim of this study was to evaluate patients' knowledge and perception of the use of systemic antibiotics in the treatment of endodontic infections and to determine the possible contribution of patients to the development of bacterial resistance. Five hundred and fifty patients were asked to respond to a survey on the perception of systemic antibiotic use in the treatment of endodontic infections and antibiotic resistance during January 2022 and March 2023. Data were analyzed using descriptive statistics and Pearson's Chi-square test. 514 patients were included in the study, 65.9% of whom were women. While 34.6% of the population studied thought that it was always necessary to take antibiotics prior to endodontics, 49.4% considered that they were necessary after endodontics, regardless of the clinical symptoms (p&gt;0.05). The prevalence of self-medication was 17.3% and women self-medicate more than men, with significant differences (p&lt;0.05), although they have greater knowledge of antibiotic resistance than men (p&gt;0.05). Forty-four percent of the population expect to take antibiotics when faced with dental pain, mainly women (p&lt;0.05). The general population is contributing to the serious problem of bacterial resistance. It is necessary to promote educational strategies focused on the correct use of antibiotics in the community.

Plastics have become an important environmental concern due to their durability and resistance to degradation. Out of all plastic materials, polyesters such as polyethylene terephthalate (PET) are amenable to biological degradation due to the action of microbial polyester hydrolases. The hydrolysis products obtained from PET can thereby be used for the synthesis of novel PET as well as becoming a potential carbon source for microorganisms. In addition, microorganisms and biomass can be used for the synthesis of the constituent monomers of PET from renewable sources. The combination of both biodegradation and biosynthesis would enable a completely circular bio-PET economy beyond the conventional recycling processes. Circular strategies like this could contribute to significantly decrease the environmental impact of our dependence on this polymer. Here we review the efforts made towards turning PET into a viable feedstock for microbial transformations. We highlight current bottlenecks in the degradation of the polymer and the metabolism of the monomers and we showcase fully biological or semisynthetic processes leading to the synthesis of PET from sustainable substrates.

Crohn's disease (CD) results from an aberrant immune response against commensal microbiota in genetically susceptible hosts. However, the nature of immune defects, the microflora involved, and genetic susceptibility remain incompletely defined and controversial. This review seeks to describe the present state of association between CD and renal disease; moreover, we highlight the convergence of CD with amyloidosis that can trigger sustained inflammation, producing the pathological alteration observed in both diseases. The following MESH terms were searched in PubMed, PubMed Central (PMC), and Web of Science: “Crohn´s disease” and “renal disease.” The R RISmed package was used for PubMed and PMC. The abnormal humoral immune response is described along with alterations in immune cell migration mechanisms in CD during inflammation.

This study aims to assess the feasibility of delineating and identifying mineral ores from hyperspectral images of tin-tungsten mine excavation faces using machine-learning classification. We compiled a set of hand samples of minerals of interest from a tin-tungsten mine and analyzed two types of hyperspectral images: 1) images acquired with a laboratory set-up under close-to-optimal conditions; and 2) scan of a simulated mine face using a field set-up, under conditions closer to those in the gallery. We have analyzed the following minerals: cassiterite (tin ore), wolframite (tungsten ore), chalcopyrite, malachite, muscovite, and quartz. Classification (Linear Discriminant Analysis, Singular Vector Machines and Random Forest) of laboratory spectra had a very high overall accuracy rate (98%), slightly lower if the 450 – 950 nm and 950 – 1780 nm ranges are considered independently, and much lower (74.5%) for simulated conventional RGB imagery. Classification accuracy for the simulation was lower than in the laboratory but still high (85%), likely a consequence of the lower spatial resolution. All three classification methods performed similarly in this case, with Random Forest producing results of slightly higher accuracy. The user’s accuracy for wolframite was 85%, but cassiterite was often confused with wolframite (user’s accuracy: 70%). A lumped ore category achieved 94.9% user’s accuracy. Our study confirms the suitability of hyperspectral imaging to record the spatial distribution of ore mineralization in progressing tungsten-tin mine faces.

This study presents a methodology to fabricate Ti6Al4V cylindrical compacts with a highly porous core and dense shell with the purpose to mimic the bone microstructure. Compacts with different core diameters were obtained by conventionally press and sintering. Large pores were created with the aid of pore formers. Sintering kinetics was determined by dilatometry, whereas characterization was performed by X-ray computed tomography. Also, permeability was evaluated on the 3D microstructure and the mechanical strength was evaluated by compression tests. Results indicated that sintering is constraint by the different densification rates of the porous and dense layers. Nonetheless, defectless compacts were obtained due to neck bonding between Ti6Al4V particles. Large pores were located in the designed core with similar pore size distribution. Permeability increased following a power law as a function of the pore volume fraction. Stiffness of bilayer components was driven by the porous core, meanwhile, the strength resulted from the combination of both layers. Bilayer materials obtained showed a permeability and mechanical properties, as well as admissible strain (σy /E) similar to those of human bones.

Biological samples are a complex and heterogeneous matrix where different macromolecules with different physicochemical parameters cohabit in reduced spaces. The introduction of fluorophores into these samples, such as in the interior of cells, can produce changes in the fluorescence emission properties of these dyes caused by the specific physicochemical properties of cells. This effect can be especially intense with solvatofluorochromic dyes, where changes in the polarity environment surrounding the dye can drastically change the fluorescence emission. In this article, we studied the photophysical behavior of a new dye and confirmed the aggregation-induced emission (AIE) phenomenon with different approaches, such as by using different solvent proportions, increasing the viscosity, forming micelles and adding bovine serum albumin (BSA), through analysis of the absorption and steady-state and time-resolved fluorescence. Our results show the preferences of the dye for nonpolar media, exhibiting AIE under specific conditions through immobilization. Additionally, this approach offers the possibility of easily determining the critical micelle concentration (CMC). Finally, we studied the rate of spontaneous incorporation of the dye into cells by fluorescence lifetime imaging and observed the intracellular pattern produced by AIE. Interestingly, different intracellular compartments present strong differences in fluorescence intensity and fluorescence lifetime. We used this difference to isolate different intracellular regions to selectively study these regions. Interestingly, the fluorescence lifetime shows a strong difference in different intracellular compartments, facilitating selective isolation for a detailed study of specific organelles.

The experimental results of forces and efforts derived from the opening of incisions in the orbital cavity in a pig’s head are presented in this article. The different areas of the incision openings are related to the needs at the incision procedure for a dacryocystorhinostomy. In terms of the experimental procedure, an origin and a plane are defined so as to allow the location of the opening of the incision. The incisions are retracted along an axis of said origin. This procedure has been based on the mathematical model developed for this work, which consists of a procedure for determining the behavior of an incision when a force is applied to retract the skin. The experimental data obtained, suggests the existence of an almost linear relationship between the increment of resistance in relation to the time obtained for each opening, the same of which is deemed to be consistent with the behavior of an elastic material.