In-wheel motor vehicles are gaining attention as a new type of electric vehicle due to their efficient power units located inside each wheel hub. However, they are more susceptible to wheel resonance due to the increase in unsprung mass caused by the motor's weight. This can result in decreased both the ride comfort and driving stability. To resolve this issue, this study aims to apply an optimal switching controller with a semi-active n actuator; magnetorheological (MR) damper. For the implementation of the optimal switching controller, a road type classification is also carried out. An acceleration sensor is used for road type classification, and control logics include a ride comfort controller; the linear quadratic regulator (LQR _Paved Road) and a wheel motion controller (LQR_Off Road) for improved driving stability. For paved roads, the LQR_Paved Road control input is applied to the MR damper. However, if a road type prone to wheel resonance is detected, the control logic switches to the LQR_Off Road. During the transition, a weighted average of both LQR_ Paved Road and LQR_Off Road control input is applied to the actuator. Computer simulations are undertaken to evaluate vibration control performance, including the ride comfort and driving stability at various road profiles.

Using morphological characteristics and SSR markers, we evaluated the morphological and genetic variation of 200 Perilla accessions collected from the five regions of South Korea and other region. In morphological characteristics analysis, particularly, leaf color, stem color, degree of pubescence, leaf size were found to be useful for distinguishing the characteristics of native Perilla accessions cultivated in South Korea. A total of 137 alleles were identified in the 20 simple sequence repeat (SSR) markers, and the number of alleles per locus ranged from 3 to 13, and the average number of alleles per locus was 6.85. The average gene diversity (GD) was 0.649, with a range of 0.290-0.828. From analysis of SSR markers, accessions from the Jeolla-do and Gyeongsang-do regions showed comparatively high genetic diversity values compared with those from other regions in South Korea. In the unweighted pair group method with arithmetic mean (UPGMA) analysis, the 200 Perilla accessions were found to cluster into three major groups and an outgroup with a genetic similarity of 42%, and did not showed a clear geographic structure from the five regions of South Korea. Therefore, it is believed that landrace Perilla seeds are frequently exchanged by farmers through various routes between the five regions of South Korea. The results of this study are expected to provide useful information for conservation of these genetic resources and selection of useful resources for the development of varieties for seeds and leafy vegetables of cultivated var. frutescens of Perilla crop in South Korea.

We evaluated hexadecyltrimethylammonium bromide (HTAB) for use in radio frequency (RF) applications in which liquid crystals (LCs) are used in layered structures that have various cell gap conditions. HTAB is a surfactant that can self-align vertically on the surface of indium tin oxide (ITO) substrates, and can induce homeotropic alignment of the LCs. For implementing RF devices with HTAB and LCs, we should consider limitations caused by the design conditions which are different from conventional liquid crystal displays such as cell gap. We quantified the concentration of HTAB ([HTAB]) that is necessary to form and maintain a sufficiently dense vertical alignment of 5CB (4-Cyano-4'-pentylbiphenyl). The required [HTAB] for full-homeotropic alignment was proportional to the cell gap until it was too large to support the transfer of the surface alignment to the LC, due to the weak anchoring nature of HTAB. We also showed the phase-change characteristic of the LC mixture depended on [HTAB] for the design of RF devices driven by light or heat. This work may help to guide the development of new approaches to designing efficient RF devices that use LCs.

Poly(acrylic acid) (PAAc) hydrogels possess good bioadhesive properties and allow enhanced penetration of drugs. In addition, it is possible to localize the absorption site of the drug in the hydrogel and increase the drug residence time. As opposed to other cross-linking processes radiation-induced polymer cross-linking can be easily and rapidly carried out without the use of cross-linking agents and other chemical additives. In this study, we fabricated metronidazole (MD) containing PAAc hydrogel (MD/PAAc) with different MD contents (0.1, 0.25, 0.5 wt%) using varying radiation doses (25, 50, 75 kGy) by gamma-irradiation. The physical and thermal properties were determined by gel content analysis, swelling ratio measurements, compressive strength measurements, differential scanning calorimetery, and thermogravimetric analysis. The properties of the hydrogel degraded due to the crystalline nature of MD. The properties of the hydrogel degraded due to the crystalline nature of MD. Cumulative release observed after 50 min in the case of 0.5MD/PAAc and 0.1MD/PAAc was 50% and 10%, respectively. Our findings suggest that MD/PAAc could be a suitable drug delivery carrier for use with radiation-based techniques.

Herein, we developed a highly sensitive and specific bimolecular fluorescence complementation (BiFC)-based influenza A virus (IAV) sensing system created by combining a galactose/glucose-binding protein (GGBP) with an N-terminal large domain (YN1-172) and a C-terminal small domain (YC173-239) of enhanced yellow fluorescence protein (eYFP). The GGBP-based BiFC reporter exhibits the fluorescence reconstitution as a result of conformational changes in GGBP when lactose, derived from 6’-silalyllactose used as a substrate for neuraminidase (NA), binds to GGBP in the presence of IAV. The system showed a linear dynamic range from 1 x 100 TCID50/mL to 1 x 107 TCID50/mL, with a detection limit of 4 x 101 TCID50/mL for IAV (H1N1), demonstrating ultra-high sensitivity. Our system exhibited fluorescence intensity enhancements in the presence of IAV, while displaying weak fluorescence signals when exposed to NA-deficient viruses such as RSV A, RSV B, adenovirus and rhinovirus, thereby indicating selective responses for IAV detection. Taken together, our system provides a simple, highly sensitive and specific IAV detection platform based on BiFC capable of detecting the ligand-induced protein conformational changes, obviating the need for virus culture or RNA extraction processes.

Flammability was evaluated and the results showed the values of critical flux at extinguishment (CFE) as 49.5kW/㎡ on average, total heat release (Qt) as 0.21MJ on average, and peak heat release rate (Qp) as 0.66kW on average, which satisfied all of the thresholds presented by the IMO. Therefore, flame-retardant plywood, of which the flame-retardant performance was evaluated, was determined to be an applicable finishing material that satisfies fire safety standards.

Resection of malignant lesions in the oral and maxillofacial area causes functional and morphological defects. To recover from these defects, reconstruction surgery is needed such as a primary closure or a flap. There are advantages and disadvantages to the method of using the primary closure and the flap, and the choice of procedure is entirely up to a surgeon. The purpose of this study is to evaluate availability of primary closure in patients. For 10 years from January 2010 to May 2020, patients who recovered using flaps after removing malignant lesions from the oral cavity and those who closed the lesion using primary closure were investigated. The investigation was conducted by searching the database of the hospital. There were 85 patients who removed malignant lesions in the oral and maxillofacial area, and among them 16 patients closed the soft tissue defects using primary closure. Operation time, histologic types, stages, wound status, and period of hospitalization according to the patients' medical records were investigated retrospectively. Between the staging and the primary closure, statistically significant differences were observed between stage I and stage II patients in 13 patients using the primary closure. (P=0.046). Statistically significant differences were identified between operation time and primary closure, with an average of 4.02 hours (P=0.015). The average period of hospitality for patients who underwent primary closure was 13.4 days, compared to 26.7 days for those who underwent flap surgery. This difference was statistically significant (P=0.0003). This study evaluated the use of primary closure in patients who underwent resection of malignant lesions in the oral and maxillofacial area. Although the majority of patients underwent reconstruction with flaps, our results showed that primary closure can be a viable option for certain patients with early-stage lesions. Therefore, oral and maxillofacial surgeons should carefully consider various evaluation criteria and select appropriate reconstruction methods to optimize functional and aesthetic outcomes for each patient.

Recently, research on ultra-high-performance concrete (UHPC) with the characteristics of ultra-high strength, high toughness, and high durability has been actively conducted from materials to actual structural applications. However, research on experimental methods that reflect the unique characteristics of UHPC, which are different from those of normal concrete, is insufficient. To solve the difficulties in applying the compressive creep test method for normal concrete to UHPC and to verify the validity of the recently proposed ASTM C 1856 standard test method, this study performed compressive creep tests on UHPC with variables of specimen size, sustained load intensity, fiber length, and strain measuring method. Two types of cylindrical specimens of ϕ100 × 200 mm and ϕ75 × 150 mm were used for a specimen size variable. The sustained load intensities of 10% to 40% based on the specified compressive strength of 150 MPa were applied. Two types of steel fiber lengths of 13 mm and 19.5 mm in the UHPC mix were used as a variable, and three strain measuring methods of the embedded strain gauge method, the attached strain gauge method, and the strain meter with stud measured the change in length of the UHPC specimens. The experimental results showed that the strain meter method using the standard rod had limitations due to the error in the verification process using the standard rod and the observation error of the measurer, and the sustained load intensity is preferable to 15% to 40% of the actual compressive strength. It was found that it is possible to perform a compressive creep test for UHPC using a specimen with a size of ϕ75 mm or more, and the fiber length did not affect the creep behavior of UHPC up to 19.5 mm. As a result of comparing the UHPC creep test results with the creep prediction model, the B3 model was found to most accurately predict the UHPC creep behavior. The creep coefficient pattern of the B3 model was very similar to the measured results, and well reflected the effects of the mixing ratio and compressive strength of UHPC.

Levels of synthetic musk fragrances (SMFs) and various personal care products (PCPs) were measured in the Han River and its tributaries in Seoul, Korea. The most abundant SMF in all river and PCP samples was 4,6,6,7,8,8-hexamethyl-1,3,4,7-tetrahydrocyclopenta[g]isochromene (HHCB), followed by 1-(3,5,5,6,8,8-hexamethyl-6,7-dihydronaphthalen-2-yl)ethanone (AHTN), musk ketone (MK), and 1,1,2,3,3-pentamethyl-2,5,6,7-tetrahydroinden-4-one (DPMI). There was a significant correlation between the SMF concentration in the PCPs and the Han River samples. Moving from upstream to downstream in the Han River, the median SMF concentration was 6.756, 2.945, 0.304, and 0.141 μg/L in the sewage treatment plant (STP) influent, effluent, tributaries, and mainstream, respectively, implying that effective SMF removal was achieved during the sewage treatment process, followed by dilution in the receiving water. Four STPs using advanced biological treatment processes had removal efficiencies of 55.8%, 50.6%, 43.3% for HHCB, AHTN, and MK, respectively. The highest SMF concentrations in the tributaries were observed at locations close to the STPs. Our study confirmed that the main source of SMFs in the receiving water were sewage effluent containing untreated SMFs, which are largely originated from household PCPs, especially hair care products (e.g., shampoo) and perfumes.

Service robots operating in indoor environments should recognize dynamic changes from sensors, such as RGB-D camera, and recall the past context. Therefore, we propose a context query-processing framework, comprising spatio-temporal robotic context query language (ST-RCQL) and spatio-temporal robotic context query-processing system (ST-RCQP), for service robots. We designed them based on the spatio-temporal context ontology. ST-RCQL can query not only the current context knowledge but also the past. In addition, ST-RCQL includes a variety of time operators and time constants, and thus queries can be written very efficiently. The ST-RCQP is a query-processing system equipped with a perception handler, working memory, and backward reasoner for real-time query-processing. Moreover, ST-RCQP accelerates query-processing speed by building a spatio-temporal index in the working memory, where percepts are stored. Through various qualitative and quantitative experiments, we demonstrate the high efficiency and performance of the proposed context query-processing framework.

The aim of this work is to study the phase transformations, microstructures and mechanical properties of the martensitic stainless steel (MSS) 410 deposits produced by laser powder-directed energy deposition (LP-DED) additive manufacturing. The LP-DED MSS 410 deposits underwent the post heat treatment in austenitizing at 980℃ for 3hrs and followed by different tempering treatment at the temperatures of 250, 600, and 750℃ for 5hrs, respectively. The analyses of phase transformations and microstructural evolutions of LP-DED MSS 410 were carried out using X-ray diffraction, SEM-EDS, and EBSD. Vickers hardness and tensile strength properties were also measured to analyze the effects of the different tempering heat treatments. It reveals that as-built MSS 410 has very fine lath martensite and high hardness of about 480HV1.0 and tensile strength of about 1280 MPa, but elongation was very lower than the post heat treated ones. Precipitations of chromium carbide (Cr23C6) were most commonly observed at the grain boundaries and the entire matrix at the tempering temperatures of 600℃ and 750℃. In general, the tensile strengths de-creased from 1381MPa to 688MPa as tempering temperatures increased up to 750℃ from 250℃. Additionally, as the tempering temperature increased, the chromium carbide and tempered mar-tensite structures became coarser.

Cement-free concrete has superior physical performance, such as strength and durability, compared to OPC concrete, however, it has the disadvantage of large shrinkage. Large shrinkage can cause cracks due to shrinkage stress in the long term. In this study, a shrinkage reducing agent (SRA) was used to reduce the shrinkage of cement-free mortar; its content was increased from 0.0 to 1.5 %. For an SRA content of 1.0 %, a calcium sulfoaluminate (CSA) expansive additive (EA) (2.5, 5.0, and 7.5%) was added. To calculate the shrinkage stress of cement-free mortar using the SRA and EA, the compressive strength, elastic modulus, and total and autogenous shrinkage were measured. The unit shrinkage stress of cement-free mortar was obtained by multiplying the elastic modulus by the length change and accumulated to obtain the shrinkage stress acting on the mortar according to the age. The shrinkage stress of cement-free mortar showed different tendencies as the age increased. At early ages, the shrinkage rate of the mortar occupied a large proportion of the shrinkage stress. In the long term, the shrinkage stress was significantly affected by the elastic modulus. As a result, SRA was found to be effective in reducing the shrinkage stress by decreasing both the elastic modulus and shrinkage. However, EA increased the shrinkage stress over the long term due to an increase in elastic modulus even though it compensated for early-ages shrinkage.

Evaluating soil quality across various altitudinal gradients, both with and without vegetative cover, is crucial for the proper functioning of soil and optimal crop growth, thereby contributing to the sustainability of agroecosystems. Although the altitudinal gradient significantly influences soil quality, the ability to predict this quality, expressed through an index, in soils with and without vegetative cover, is still insufficiently explored. This study aimed to assess soil quality in the Jun Jun micro-watershed, located in the Tungurahua region, Ecuador. To achieve this objective, three categories of altitudinal gradients were selected: less than 2800 meters above sea level (masl), between 2800 and 2900 masl, and greater than 2900 masl. A total of 24 soil samples were collected in the mentioned gradients, considering both areas with and without vegetative cover. The indicators used included chemical and biological parameters such as soil organic carbon (OC), earthworm density (WD), earthworm biomass (WB), organic matter (OM), pH, total nitrogen (TN), and organic carbon (OC). The results revealed that in areas with altitudinal gradients below 2800 masl, soil quality index values were higher compared to other altitudes. In vegetated areas, a decrease in index values was observed as the altitudinal gradient increased, indicating a deterioration in soil quality with altitude. These findings are significant in providing a quantitative assessment of the effects of altitudinal gradient and vegetative cover influence on soil quality.

Purpose: To compare refractive prediction error (PE)s between phacotrabeculectomy and phacoemulsification. Methods: Refractive PE was defined as the difference of spherical equivalent between the predicted value using the Barrett Universal II formula and the actual value obtained at postoperative one month. Forty-eight eyes that had undergone phacotrabeculectomy (19 eyes, open-angle glaucoma; 29 eyes, angle-closure glaucoma) were matched with 48 eyes that had undergone phacoemulsification by age, average keratometry value and axial length (AL), and their PEs were compared. The factors associated with PE were analyzed by multivariable regression analyses. Results: Phacotrabeculectomy group showed a larger absolute PE compared to the phacoemulsification group (0.51 ± 0.37 Diopters vs. 0.38 ± 0.22, P=0.033). Larger absolute PE was associated with longer AL (P=0.010) and higher intraocular pressure (IOP) difference (P=0.012). Hyperopic shift (PE>0) was associated with shallower preoperative anterior chamber depth (ACD) (P=0.024) and larger IOP difference (P=0.031). In the phacotrabeculectomy group, the PE was inversely correlated with AL: long eyes showed myopic shift and short eyes hyperopic shift (P=0.002). Conclusions: Surgeons should be aware of the possibility of worse refractive outcomes when planning phacotrabeculectomy especially in eyes with high preoperative IOP, shallow ACD, and/or extreme AL.

In this study, Li-Al-OH layered double hydroxide (LDH), which was prepared by solvent-free one-step mechanochemical reaction of LiOH and Al(OH)₃, was applied to remove boron from aqueous solution. Dry-grinding for 3 h at a rotational speed of 500 rpm, Li/Al molar 1/2 was the optimum condition to prepare highly crystalline of Li-Al LDH phase with no evident impure phases. Two milling products with Li/Al molar ratio at 1/2 and 2/2 were evaluated for boron adsorption. The results confirmed that Li/Al molar ratio 2/2 sample showed high boron adsorption capacity due to the physical adsorption of Li-Al-OH LDH and chemical synergism of phase gel Al(OH)₃. The adsorption isotherms, described by the Langmuir model, indicated maximum monolayer boron uptake capacity 45.45 mg/g, implying competitive adsorption capacity of the material in our experiment.

Autonomous Underwater Vehicles (AUVs) are emerging as pivotal tools in underwater applications such as seafloor exploration and the inspection of pipelines or cables. Traditional land-based avoidance methods prove insufficient when applied to the complex underwater environment, largely due to the unique constraints presented by marine environments and the specific dynamics of AUVs. In this study, we introduce an improved stream function-based obstacle avoidance algorithm specifically tailored for autonomous underwater vehicles. The proposed algorithm is based on a stream function that is derived from the stream function. The stream function is characterized by a radial histogram for the cost function. In addition, constraints related to the maximum path curvature are discussed to optimize the utility of the path. Our exhaustive simulation cases validate the robustness and adaptability of the proposed algorithm, demonstrating its ability to produce feasible and optimized avoidance paths in a variety of scenarios.

This case report describes evidence of intratubular biomineralization in root canal filled with calcium enriched material after 8 years of clinical maintenance. The schematic findings of dentinal tubules were investigated with scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The root canal obturation material was closely adapted to root dentin surface, suggesting the possibility of chemical bonding between the two interfaces. SEM and EDS observation of dentinal tubules showed intratubular biomineralized crystal structures with Ca/P ratio in a range of 1.30–2.12, suggesting bioactive capacity of calcium enriched cement.

Exergy analysis evaluates the efficiency of system components by quantifying the rate of entropy generation. In general, the exergy destruction rate or irreversibility rate was directly obtained through the exergy-balance equation. However, this method cannot determine the origin of the component's entropy generation rate, which is a very important factor in system design and improvement. In this study, a thorough energy, exergy thermoeconomic analysis of a proton exchange membrane fuel cell (PEMFC) was performed, providing the heat transfer rate, entropy generation rate and cost loss rate of each component. The irreversibility rate of each component is obtained by the Gouy-Stodolar theorem. Detailed and extensive exergy and thermoeconomic analyses of PEMFC system have determined that water cooling units experience the greatest heat transfer among the components in the studied PEMFC system, resulting in the greatest irreversibility and thus the greatest monetary flow loss.

After the occurrence of a hydrogen fluoride leakage accident that triggered massive losses in Gumi, South Korea in 2012, the government and companies have been interested in installing mitigation systems to minimize the loss of a leakage accident. What lacks in previous researches studying mitigation systems is an evaluation of how much a mitigation system can reduce the impact of accidents. Therefore, modeling-based simulations of mitigation systems should be urgently developed to analysis of the performance of a mitigation system. This study aims to design a mitigation system to handle a leakage accident of a storage tank and determine its design specifications through the use of modeling. The basic concept is that when leakage occurs, leakage material in a dike is drained to a remote impoundment installed under the ground, while the material in the storage vessel is transferred to a reserve tank by a pump at the same time. To evaluate the efficacy of this system. hydrogen fluoride and benzene storage vessels are tested. The simulation results indicate that the proposed mitigation system can contribute to the reduction in the dispersion area for the materials as well as a large reduction in the leakage material.

Magnetorheological (MR) fluid is recognized as one of intelligent materials that is widely used for various kinds of controllable devices since its rheological characteristics can be controlled by an external magnetic field (or input current). However, the density mismatch of the compositions between iron particles and carrier oil leads to inevitable sedimentation. Therefore, many works on the sedimentation problem of MR fluids have been carried out to improve the sedimentation stability using appropriate additives, surfactants, nanoparticles, particle coating as well as using several carrier oils with different densities. However, a study on the effect of the current magnitudes and profiles on the sedimentation is considerably rare. This study experimentally investigates the sedimentation behaviors due to the different current magnitudes and different profiles such as square and sine wave. It is shown that average sedimentation rate is 98.61% by applying 1 A of the square wave, while it is 97.83% under the sine type of the current. It is also identified that the higher intensity of the applied current results in stronger electromagnetic which can slow down the sedimentation rate. The results presented in this work are very helpful in designing a controller which provides the input current in terms of the magnitude and profile configuration.

Floor mats are commonly used to improve the impact sound performance of existing homes, but the actual reduction does not consistently appear depending on the test-bed conditions used to determine it. Therefore, this study evaluated the effects of the environmental conditions of the test-bed on the impact sound reduction performance of different floor mats. The Korean Industrial Standard, KS F 2865, specifies the measurement method in the test room and sets the thickness range of the available target floor structure from bare slab 120 mm to 210 mm. The evaluation method is ∆?, which is the difference in standardized impact sound levels before and after the installation of the floor finishing material. In this study, a total of eight types of floor mats were tested in four different test-beds according to KS F 2865. The impact sources used were tapping, bang machines and a rubber ball to consider both light-weight and heavy-weight impact sounds. The results were derived as impact sound reduction performance for each frequency band and a single number quantity. The results showed that light impact sound had a similar minimum reduction characteristic of at least 38 dB, regardless of the floor structure on which the mat was installed. However, the heavy-weight impact sound showed different tendencies depending on the floor mat and the characteristics of the floor structure of the test-bed when a bang machine and a rubber ball were used. In particular, the reduction by the bang machine showed less than half the tendency of the reduction by the rubber ball, and the tendency of the heavy-weight impact sound to be reduced depending on the floor mat was maintained, but the reduction differed depending on the test bed. The reduction was larger in the box-type test room than in the real-life type test room, and among the box-type test rooms, the one with a thicker bare slab showed a relatively larger reduction. In addition, the reliability of the measurement results was discussed through the correlation analysis between the single number quantities depending on the thickness of the bare slab of the test-beds.

In accordance with regulations set forth by the Ministry of Land, Infrastructure, and Transport in Korea regarding the "Flame Retardant Performance of Building Finishing Materials and Fire Spread Prevention Structure," it is mandated that semi-noncombustible materials have a total heat emission less than 8 MJ/m². Consequently, our study aimed to determine the ideal quantity of flame-retardant treatment required to meet the fire safety standards for Korean larch and Japanese cedar, commonly used exterior materials in Korean construction. To this end, we investigated using a cone calorimeter to observe changes in the THR (Total Heat Released) based on the AFI (Amount of Flame-retardant Impregnation) in Korean larch and Japanese cedar. Our findings indicated that the AFI needed to satisfy the prescribed flame-retardant standard of 8 MJ/m² was THR 299 MJ/m² for Korean larch and THR 526 MJ/m² for Japanese cedar. As a result, we established optimal impregnation levels of flame retardant for both species.

Recent developments in high-performance electrode materials have been pivotal for real-time monitoring biosensors, necessitating compatibility with biomaterials and robust electrochemi-cal properties. This study explores the development of electrode materials using single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs), with a primary fo-cus on assessing their dispersion and electrochemical properties. Various solvents, including N N-Dimethylformamide (DMF), deionized water, ethanol, and acetone, were used for dispersion analysis by employing ultrasonic waves. The results showed that SWCNTs exhibited well-dispersed characteristics without precipitation when introduced to a DMF solution. It found that resistance values decreased as the concentration of SWCNTs increased over the range of 0.025 to 0.4 g/L, with a considerable electrical conductivity reached at concentrations ranging from 0.2 g/L to 0.4 g/L in DMF. The biosensor platform was evaluated with 1-pyrenebutanoic acid succin-imidyl este (PBSE) as the linker and glucose oxidase (Gox) and chitosan as the binding substrate. The binding of Gox with glucose resulted in a significant decrease in resistance value of the biosensor with rising their concentrations ranged from 0.001 to 0.1 M. Though this research provides founda-tional insights for the advancement of SWCNT-based high-performance electrode materials, it will pave the way for the next generation of efficient and reliable biosensors.

Anesthetic management for pregnant suffering from airway pathology poses unique challenges. The presence of bilateral vocal cord granuloma adds further complexity to the management, as it can potentially cause airway compromise and respiratory distress. This case presents a pregnant patient with bilateral vocal cord granuloma who underwent anesthesia using high-flow nasal cannula (HFNC) oxygenation and oxygen reserve index (ORi) monitoring. A 33-year-old pregnant woman, who had undergone intubation six month ago, experienced hoarseness and was ultimately diagnosed with bilateral granuloma. Due to the significant airway obstruction, neither intubation nor ventilation was feasible, thereby requiring a surgical intervention. Before the surgical removal, the patient’s oxygenation was ensured using HFNC oxygenation. After confirming sufficient oxygenation of the patient with ORi of 0.38, the operation commenced and as it lasted approximately 3 minutes, the patient was able to tolerate the brief period without additional oxygen supply. Post-surgical excision, mask bagging and HFNC oxygenation was resumed, driving ORi to 0.39, then the operation was resumed. Throughout the procedure, SpO2 remained above 98. The combination of HFNC and ORi ensured adequate oxygenation and allowed for early detection of hypoxemia during the procedure. This approach may be a good option for managing granuloma.

: Cnidium officinale Makino, a perennial crop in the Umbeliperae family, is harvested in the summer for medicinal purposes. The average temperature in Korea has recently increased, and consequently, the area used to cultivate C. officinale has been reduced, and plant disease and soil sickness have increased. In this study, rhizosphere bacteria were isolated from C. officinale, and their antagonistic activity evaluated against Fusarium solani, which is a major issue during repeated cultivation. Twenty-eight strains were isolated from the root and rhizosphere soil, of which seven showed antagonistic activity against F. solani and were further investigated. An in planta test found that the dead rate of shoots was significantly lower in the group inoculated with PT1 isolated from the root tissue and that the fresh and dry weights were also higher, when compared with the other groups. PT1 was thus considered to have antagonistic activity against F. solani. The 16S rRNA analysis identified the PT1 as Leclercia adecarboxylata, and downstream studies confirmed the production of enzymes related to antagonism, such as siderophore and N-acetyl-β-glucosaminidase. The phosphorous solubilizing ability and secretion of related enzymes were also confirmed. The results indicate that PT1 could be utilized as a PGPR to help control fusarium wilt.

The present study was conducted to investigate the effects of rhizome extract of Dioscorea batatas (Dioscoreae Rhizoma, Chinese Yam) and its bioactive compound, allantoin, on myoblast differentiation and mitochondrial biogenesis in skeletal muscle cells. Yams were extracted in water and the extract was analyzed by HPLC. The expression of C2C12 myotubes differentiation and mitochondrial biogenesis regulators were determined by reverse transcriptase (RT)-PCR or Western blot. The glucose levels and total ATP contents were determined by glucose consumption, glucose uptake and ATP assays, respectively. Treatment with yam extract (1 mg/mL) and allantoin (0.2 and 0.5 mM) significantly increased of MyHC expression compared with non-treated myotubes. Yam extract and allantoin significantly increased the expression of mitochondrial biogenesis regulating proteins, PGC1?, Sirt-1, NRF-1, and TFAM, as well as the phosphorylation of AMPK and ACC in C2C12 myotubes. Furthermore, yam extract and allantoin significantly increased the glucose uptake levels and the ATP contents. Finally, HPLC analysis revealed that the yam extract contained 1.53% of allantoin. Yam extract and allantoin, stimulated myoblast differentiation into myotubes and increased energy production through upregulation of mitochondrial biogenesis regulators. These findings indicate that yam extract and allantoin can help to prevent the skeletal muscle dysfunction through stimulation of energy metabolism.

(1) Background: To identify the association between the presence or absence of raphe and aortic valve dysfunction as well as the presence of aortopathy in patients with bicuspid aortic valve (BAV); (2) Methods: This retrospective study enrolled 312 participants (mean [SD] age, 52.7 [14.3] years; 227 men [72.8%]) with BAV. The BAVs were divided into those with presence (raphe+) or absence (raphe-) of raphe. Valvular function was classified as normal, aortic regurgitation (AR), or aortic stenosis (AS) using TTE. The pattern of BAV aortopathy was determined by the presence of dilatation at the sinus of Valsalva and the middle ascending aorta using CCT.; (3) Results: BAVs with raphe+ had a higher prevalence of AR (148 [79.5%] vs. 48 [37.8%], P < .001) but a lower prevalence of AS (90 [48.6%] vs. 99 [78.0%], P < .001) compared with those with raphe-. The types of BAV aortopathy were significantly different (P = 0.021) according to those with BAV-raphe+ and BAV-raphe-.; (4) Conclusions: The presence of a raphe was significantly associated with a higher prevalence of AR but a lower prevalence of AS and combined dilatation of the aortic root and middle ascending aorta. The presence of raphe was an independent determinant of AR.

Nowadays, in order to improve asphalt pavement performance, durability and reduce environmental pollution caused by asphalt binder, many researchers are studying to modify asphalt concrete (AC) and find alternative paving materials to extend service life of asphalt pavement. One of the successful materials used in a modification of AC are fibers. Different types of fibers have been reinforced in AC mixture and improvements have been observed. This research studies the performance of glass wool fiber reinforced in a dense-graded asphalt mixture. Generally, glass fibers are known to have excellent mechanical properties such as high tensile modulus, 100% elastic recovery and a very high tolerance to heat. The glass wool fibers are commonly used as a thermal insulation material. In this research to evaluate the performance of glass wool fiber in AC, laboratory tests Marshall mix design test, Indirect tensile strength (IDT), Tensile strength ratio (TSR) and Kim test were conducted to determine a proper mix design, tensile properties, moisture susceptibility, rutting and fatigue behaviors. Results show that addition of glass wool fibers does affect the properties of AC mixture. The use of glass wool fibers showed a positive consistence results, in which it improved the moisture susceptibility and rutting resistance of the AC. Also result showed addition of fiber increased tensile strength and toughness which indicates that fibers have a potential to resist distresses that occur on a surface of the road as a result of heavy traffic loading. The overall results showed that addition of glass wool fiber in AC mixture is beneficial in improving properties of AC pavements.

Definitive surgical resection is the preferred treatment for early-stage non-small-cell lung cancer (NSCLC). Research into genetic alterations, including epidermal growth factor receptor (EGFR) mutation, in early stage NSCLC remains insufficient. Here, we investigated the prevalence of genetic alterations in early-stage NSCLC and the association between EGFR mutation and recurrence after complete resection. Between January 2019 and December 2021, 659 patients with NSCLC who underwent curative surgical resection at a single regional cancer center were recruited. We compared the clinical and pathological data between the recurrence and non-recurrence groups. Multivariate logistic regression was used to predict the risk factors for recurrence. Among the 659 enrolled cases, the most common histology was adenocarcinoma (74.5%), followed by squamous cell carcinoma (21.7%). The prevalence of EGFR mutation was 43% (194/451). Among them, L858R point mutation and exon 19 deletion was 52.3% and 42%, respectively. ALK rearrangement was found at 5.7% (26/453), and ROS1 fusion was found at 1.6% (7/441). The recurrence rate of the entire population was 19.7%. In multivariate analysis, the presence of EGFR mutation, stage II or III (vs. stage I), and pathologic subtype (presence of solid type) were associated with recurrence. Among the recurred group, 86.5% of the patients with EGFR mutation experienced distant recurrence compared to only 66.7% of wild-type (p = 0.016), with no significant difference in median disease-free survival (p = 0.983). In conclusion, the prevalence of EGFR mutation, ALK rearrangement, and ROS1 fusion was 43.0%, 5.7%, and 1.6%, respectively in patients with early-stage NSCLC who underwent curative resection. Along with stage II/III and solid pathologic subtype, EGFR mutation was an independent risk factor for recurrence. In the recurrence group, the rate of distant metastasis was higher in patients with EGFR mutation than in those with wild-type.

Breath volatile organic compound analysis is a non-invasive tool for assessing health status; the compositional profile of these compounds in the breath of patients with chronic kidney disease is believed to change with decreasing renal function. We aimed to identify breath volatile organic compounds for recognizing patients with chronic kidney disease. Using thermal desorption-gas chromatography-mass spectrometry, untargeted analysis of breath markers was performed using breath samples of healthy controls (n=18) versus non-dialysis (n=21) and hemodialysis (n=12) patients with chronic kidney disease in this cross-sectional study. A total of 303 volatile organic compounds alongside 12 clinical variables were used to determine the breath volatile organic compound profile. Metabolomic analysis revealed that age, systolic blood pressure, and fifty-eight breath volatile organic compounds differed significantly between the chronic kidney disease group (non-dialysis + hemodialysis) and healthy controls. Thirty-six volatile organic compounds and two clinical variables that showed significant associations with chronic kidney disease in the univariate analysis were further analyzed. Different spectras of breath volatile organic compounds between the control and chronic kidney disease groups were obtained. Multivariate model incorporating age, 2-methyl-pentane, and cyclohexanone showed high performance (accuracy, 86%) in identifying patients with chronic kidney disease, with odds ratios (95% confidence interval) P-values of 0.18 (0.07-2.49) 0.013; 2.10 (0.94-2.24) 0.025; and 2.31 (0.88–2.64) 0.008, respectively. Hence, renal dysfunction-associated characteristic profiles of breath volatile organic substances can be used as non-invasive markers to screen for chronic kidney disease.

The pond slider (Trachemys scripta) was designated as an invasive alien species in South Korea in 2001. Although the prevention and control of invasive species have received considerable atten-tion worldwide, studies on the current status and effective management of T. scripta in South Korea are lacking. This study aimed to elucidate the status of domestic reuse of T. scripta and provide effective management suggestions. Analysis of the National Institute of Ecology's “Na-tionwide Survey of Non-native Species in Korea” conducted from 2015 to 2022 confirmed the habitats of 1,440 T. scripta individuals at 295 sites. T. scripta is the most frequently observed among invasive turtles identified in the Korean Peninsula. To determine the reuse of T. scripta, 13 tradi-tional markets were surveyed; five markets were confirmed to have T. scripta. Although the exact distribution route is unknown, individuals living or abandoned in the region might be resold in the market. T. scripta is mostly sold for ritual purposes. Moreover, T. scripta accounted for 31% of freshwater turtles abandoned between 2019 and 2022. Their continuous reuse has been confirmed 22 years after their designation as an invasive alien species. Therefore, effective and fundamental management measures for T. scripta are required.

Kummerowia striata is a traditional medicine used for the therapy of inflammation-related diseases. Herein, we investigated the anti-melanogenic and antioxidant activities of an ethanolic extract of K. striata (EKS) using a number of in vitro and cell culture model systems. The anti-melanogenic effect was assessed in B16F10 melanoma cells based on melanin synthesis and in vitro tyrosinase inhibitory activity and the anti-oxidant activity assays were performed using 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2ʹ-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS); EKS exhibited strong anti-oxidant activities in both the assays. The expression of tyrosinase, tyrosinase-related protein 1, tyrosinase-related protein 2, and microphthalmia-associated transcription factor was decreased in a dose-dependent manner at mRNA and protein levels upon treatment with EKS. Notably, EKS did not affect the cell viability at all the EKS concentrations used in this study, indicating that EKS-mediated inhibition of melanin synthesis is not accompanied with cytotoxicity. Collectively, our findings demonstrate, for the first time, that EKS possesses anti-melanogenic and anti-oxidant activities, and suggest that further evaluation and development of EKS as a functional supplement or cosmetic might be useful for skin whitening and for reduction wrinkles.

Environmental estrogen pollution and estrogen effects on the female reproduction system are well-recognized scientifically. Among the estrogens, 17 β-estradiol is a priority in environmental estrogen pollution, and it is also a major contributor to estrogen which regulates the female reproduction system. 17 β-estradiol is carcinogen and has a tumor promotion effect relating to breast cancer, lung cancer and others. It also affects the psychological well-being such as depression, fatigue and others. Thus, a simple method of detection of 17 β-estradiol will be important for both environmental estrogen pollution and women’s health care. This study demonstrates a simple-use, cost effective 17 β-estradiol biosensor system which can be used for both environment and women’s health care applications. The bio-recognition mechanism is based on the influence of the redox couple, K₃Fe (CN) ₆/K₄Fe (CN) ₆ by the interaction between 17 β-estradiol antigen and its α-receptor (ER- α; α-estrogen antibody). The transduction mechanism is an electrochemical analytical technique, differential pulse voltammetry (DPV). The levels of 17 β-estradiol antigen studied was between 2.25 pg/mL to 2,250 pg/mL, Phosphate buffered saline (PBS), tap water from the Cleveland regional water district, and simulate urine were used as the test media covering the potential application areas for 17 β-estradiol detection. An interference study by testosterone which has a similar chemical structure and molecular weight as those of 17 β-estradiol was carried out, and this 17 β-estradiol biosensor showed excellent specificity without any interference by similar chemicals.

Due to wood’s susceptibility to fire, it is crucial to treat wood-based materials with flame retardants, especially in construction applications. This study investigated the effectiveness of various grooving types, including transverse, longitudinal, both transverse and longitudinal, and surface grooving, in enhancing larch's vacuum pressure impregnation process. The results revealed that transverse grooving provided a slightly greater impregnation advantage than longitudinal grooving. Moreover, exceptional impregnation performance was observed in larch samples subjected to both longitudinal and transverse grooving and surface grooving, exhibiting a remarkable improvement of 214,7 % compared to untreated larch.

Autoantibodies against specific lung cancer-associated antigens have been suggested for lung cancer diagnosis. This study aimed to evaluate the diagnostic performance of anti-gen-autoantibody immune complex (AIC) against its free antigens for CYFRA21-1, ProGRP, NGAL, and NSE in non-small cell lung cancer (NSCLC). In total, 85 patients with NSCLC and 120 healthy controls (HCs) were examined using a 9G DNA chip method. The ratios of AICs to their antigens and combinations of ratios consisting of two to four markers were calculated. The levels of AICs for CYFRA21-1, ProGRP, NGAL, and NSE were higher than their free antigens in all participants. The levels of each free antigen distinguished patients with NSCLC from HCs. The ratios of AIC to its antigen and seven combinations consisting of two to four ratios were significantly higher in patients with NSCLC than those in HCs. Excellent diagnostic performance was observed for all combination ratios (C4-1), with 85.9% sensitivity and 86.7% specificity at cutoff 3.51. Higher sensitivity was observed in the very early stages (0–I) and adenocarcinoma than in stages II–IV and other pathological types. The combination of all ratios of AICs and their antigens for all four markers is useful in the diagnosis of NSCLC.

Juvenile hormones (JH) play crucial roles in insect development, reproduction, and other physi-ological functions. Because JH is specific to arthropods, including insects, it has long been stud-ied for use in pest control. Accordingly, this study aimed to identify the substances that act as JH disruptors from edible plants. Curcuminoids generally exhibit a wide range of biological ac-tivities, such as antioxidant, anti-inflammatory, antibacterial, and insecticidal properties, and they exhibit insect growth inhibitory effects. Demethoxycurcumin and bisdemethoxycurcumin, two curcuminoids from the turmeric plant Curcuma longa L. inhibit the formation of a metho-prene-tolerant (Met)–Taiman (Tai) heterodimer complex as shown through in vitro yeast two-hybrid assays. An artificial diet containing 1% (w/v) demethoxycurcumin or bisdemethox-ycurcumin reduced the number of larvae, leading to no pupal development. Building on our re-sults regarding curcuminoids, researchers can use our study as a reference to develop eco-friendly pesticides.

To expand the application scope and increase the demand for non-crimp fabrics (NCFs) as a lightweight vehicle material, the delamination and thermal strain in NCF composites must be restricted. Accordingly, to simultaneously improve the interfacial bonding and thermal stability of the NCF composites, in this study the epoxy resin, in which SiO2 nanoparticles was modified by a silane coupling agent, were infused to the stacked NCFs and between the layers of NCFs through the vacuum-assisted resin infusion molding (VARIM) process.

Obesity is a global health concern. Recent research has suggested that the development of anti-obesity ingredients and functional foods should focus on natural products without side effects. We investigated the anti-obesity efficacy and mechanisms of action of Brassica juncea extract (BJE) using in vitro and in vivo obesity models. In in vitro experiments, BJE treatment downregulated adipogenic-related proteins CCAAT/enhancer-binding protein-α (C/EBP-α), peroxisome proliferator-activated receptor-γ (PPAR-γ), adipocyte protein 2 (aP2), and lipid synthesis-related protein acetyl-CoA carboxylase (ACC). It also upregulated the heat generation protein peroxisome proliferator-activated receptor gamma coactivator-1α (PGC-1α) and fatty acid oxidation protein carnitine palmitoyltransferase-1 (CPT-1). Oral administration of BJE decreased body weight, alleviated liver damage, and inhibited lipid accumulation in high-fat diet (HFD)-induced obese mice. Inhibition of lipid accumulation by BJE in vivo was associated with decreased expression of adipogenic and lipid synthesis proteins and increased expression of heat generation and fatty acid oxidation proteins. BJE administration improved obesity by decreasing adipogenesis and activating heat generation and fatty acid oxidation in 3T3-L1 cells and in HFD-induced obese C57BL/6J mice. These findings indicate that BJE is a promising natural means of preventing obesity-related metabolic diseases.

Increasing global concern over COVID-19 has recently brought greater attention to studies due to the ease of person-to-person transmission and the current lack of effective antiviral therapy. Here, we proposed the application of the adverse outcome pathway (AOP) framework to support re-search on the pathogenesis of viral disease. We first constructed adverse outcome pathways (AOPs) applicable to COVID-19 management to understand whether the infection causes severe acute respiratory distress. Based on the AOP framework where mechanistic elucidation of the pathway from the interaction of chemicals (or viruses) to apical endpoints is represented, our COVID-19 AOP indicated that the molecular initiating event (MIE) was angiotensin-converting enzyme 2 (ACE2) interaction, and the key events (KEs) were the increased pro-inflammatory cytokines in immune cells, with increased mortality as an apical adverse outcome (AO). However, there is still limited information on the toxicity mechanisms of AOPs in COVID-19; therefore, detailed KEs and AOs on toxicity mechanisms will be required to fill these gaps in the data. This study demonstrated that the COVID-19 AOP framework is a suitable tool to design new drugs and to integrate crowded-sourced information for the battle against the COVID-19 pandemic.

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI–TOF MS) is a commonly used technique for analyzing large biomolecules. However, the utilization of organic matrices limits the small-molecule analysis because of the interferences in the low-mass region and reproducibility issues. To overcome these limitations, a surface-assisted laser desorption/ionization (SALDI), which utilizes nanostructured metallic surfaces, has been developed. Herein, a novel approach for SALDI–MS was proposed using nanoengineered gold shell with nanogaps on the silica core (SiO2@Au NGS), which is an emerging material due to its excellent heat-generating capabilities. The gold shell thickness was controlled by adjusting the concentration of gold precursor for the growth of gold nanoparticles. SALDI-MS measurements were performed on a layer formed by drop-casting a mixture of SiO2@Au NGS and analytes. At the optimized process, the gold shell thickness was observed to be 17.2 nm, which showed the highest absorbance. The ion desorption efficiency was confirmed with a survival yield upon fragmentation. Based on the enhanced SALDI capability, SiO2@Au NGS was utilized to detect various small molecules including amino acids, sugars, and flavonoids. The limits of detection, reproducibility, and salt tolerance of SiO2@Au NGS demonstrate its potential as an effective and reliable SALDI material for small-molecule analyses.

Capsizing accidents are regarded as marine accidents with a high rate of casualties per accident. Approximately 89% of all such accidents occur in small ships (vessels with gross tonnage less than 10 tons). Stability calculations are critical for assessing the risk of capsizing incidents and evaluating a ship's seaworthiness. Despite the high frequency of capsizing accidents involving small ships, they are generally exempt from adhering to stability regulations, thus remaining systemically exposed to the risk of capsizing. Moreover, the absence of essential design documents complicates direct ship stability calculations. This study utilizes hull form feature data—obtained from the general arrangement of small ships—as input for a deep learning model. The model is structured as a multilayer neural network and aims to infer hydrostatic curves, which is required data for stability calculations.

Tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) is a promising chemotherapeutic agent because of its selective apoptotic action on cancer cells. However, resistance to TRAIL-induced apoptosis remains a challenge in many cancers. The gintonin-enriched Panax ginseng extract fraction (GEF) has diverse pharmacological benefits. We explored the combined efficacy of GEF and TRAIL in inducing apoptosis in human renal cell carcinoma (RCC) cells. The effect of GEF treatment on viability, clonogenic potential, wound healing, and TRAIL-induced apoptotic signaling of RCC cells was studied in vitro. Our investigation revealed that GEF pre-treatment sensitized RCC cells to TRAIL-induced apoptosis, as evidenced by DNA fragmentation and cell proliferation, colony formation, and migration inhibition. This sensitization was linked to the upregulation of death receptors 4 and 5 and alterations in apoptotic protein expression; notably, decreased expression of Mu-2-related death-inducing gene, a novel anti-apoptotic protein. Our findings underscore the necessity of caspase activation for GEF/TRAIL-induced apoptosis using the pan-caspase inhibitor Z-VAD-FMK. It demonstrates that GEF sensitizes human RCC cells to TRAIL-induced apoptosis by upregulating DR4/5 and modulating apoptotic protein expression. These findings suggest a promising strategy for overcoming TRAIL resistance in cancer therapy and highlight the potential of GEF as a valuable adjunct to TRAIL-based treatments.

As climate changes, our daily life has been much influenced by abnormal meteorological phenomena such as heavy rainfall, heat wave, heavy snowfall, and fine dust. Atmospheric air quality is worsening day by day and indoor air quality is also affected by interconnected daily activities throughout the inside and outside of buildings and houses. Nowadays, pollutants from various sources are emitted, transformed by sunlight, vapor, and ozone and transported into the city from country to country. Due to these reasons, there have been high demands to monitor the transportation of particulate matters and improve air quality. Monitoring of pollutants and identification of type and its concentration enables us to track and control its generation and consequently find out the solution. However, monitoring of pollutants, especially, particulate matter generation and its transportation is still not fully operated in atmospheric air due to its open nature and meteorological factors. Even though indoor air is relatively easy to monitor and control than outdoor in the aspect of specific volume and contaminant source, but it still needs to consider the meteorological parameters because indoor air is not fully separated from the outdoor air flow and contaminants transportation. In this study, optical approach using spectral sensor was attempted to reveal the feasibility of wavelength and chromaticity values of reflected light from specific particles. From the analysis of reflected light of various particulate matters according to different liquid additives, parameter studies were performed to investigate which experimental conditions can contribute to the enhanced selective sensing of particulate matters. Five different particulate matters such as household dust, soil, talc powder, gypsum powder and yellow pine tree pollen were utilized and observed to elucidate the relationship between property of particulate matter and detected light spectrum. Applicable approaches to assist current particle matter sensors and improve the selective sensing were suggested.

In patients with unilateral tinnitus with normal hearing, several studies have compared the ipsilateral and contralateral ears; however, few studies have investigated its relationship with the duration of tinnitus. We compared the auditory brainstem response and otoacoustic emission parameters between ipsilateral and contralateral ears in adults with unilateral tinnitus and normal hearing. This retrospective review included 84 patients with unilateral tinnitus and normal hearing who underwent auditory brainstem response and otoacoustic emission; they were categorized according to the duration of tinnitus. The latencies and amplitudes of waves I, III, and V, and V/I ratio of both ears in auditory brainstem response, and the results of distortion-product otoacoustic emission and transient evoked otoacoustic emission were examined. The auditory brainstem response parameters, distortion-product otoacoustic emission parameters, and transient evoked otoacoustic emission parameters between the ipsilateral and contralateral ears along the duration of tinnitus were analyzed. Moreover, the failure rates of both distortion-product otoacoustic emission and transient evoked otoacoustic emission between the ears along with the duration and the effects of the variables on the amplitude and latency of each wave were examined. Although there was little significant difference between the ipsilateral and contralateral ears, laterality seemed to have an effect on wave I latency in the multiple linear regression analysis. The distortion-product otoacoustic emission failure rate of the ipsilateral ear was higher than that of the contralateral ear in all patients. However, there was no remarkable difference between the ears in the distortion-product otoacoustic emission and transient evoked otoacoustic emission parameters throughout the duration. We found that outer hair cells and the distal portion of the cochlear nerve are possible pathologic lesions in tinnitus with normal hearing and cochlear synaptopathy could be suspected. Further studies, including those on inner hair cells and higher central cortex, are needed.

Surface area and pore size distribution of Eucalyptus samples pretreated by different methods were determined by the Brunauer-Emmett-Teller (BET) technique. Three methods were applied to prepare cellulosic biomass samples for BET measurements: air, freeze, and critical point drying (CPD). Air and freeze drying caused severe collapse of biomass pore structures, but CPD effectively preserved biomass morphology. Surface area of CPD prepared Eucalyptus samples was determined to be 58–161 m2/g, whereas air and freeze dried samples were 0.5–1.3 and 1.0–2.4 m2/g, respectively. Average pore diameter of CPD prepared Eucalyptus samples were 61–70Å. CPD preserved Eucalyptus sample morphology by replacing water with a non-polar solvent, CO2 fluid, which prevented hydrogen bond reformation in the cellulose.

Smart farm is a technology that greatly helps improve the productivity and quality of crops and is being actively introduced into indoor environments such as green houses. However, it has not yet been distributed to field-grown crops. The main reason is that, unlike indoor environments, it is very difficult to collect sensor data for monitoring the growth environment of crops in open fields where weather conditions change significantly and power supply is difficult. Additionally, because various sensors are used, the data formats of the devices are different, making it difficult to process. This paper presents a field crop growth environment monitoring and big data analysis system. The proposed system first solves power supply and data communication problems using solar power generation and LPWA technology. Additionally, based on the oneM2M architecture, data from various sensors is transmitted to the server using standardized technology. The transmitted data is stored and managed on the server as big data, and can be used to predict the production and quality of field-grown crops and take appropriate measures. The proposed system is expected to create an environment optimized for the growth of field crops and help prevent and manage diseases.

Since electrical resistivity of concrete can be measured in a more rapid and simple way than chloride diffusivity, it should be primarily regular quality control of the electrical resistivity of concrete which provides the basis for indirect of quality control of concrete durability during the concrete construction. If this is realized, the electrical resistivity of concrete can be a crucial parameter to establish maintenance strategy for marine concrete structures. Electrical resistivity of concrete is important to estimate two processes involved in corrosion of reinforcement: initiation (chloride penetration) and propagation (corrosion rate). The resistivity of concrete structure exposed to chloride indicates the risk of early corrosion damage, because a low resistivity is related to rapid chloride penetration and to high corrosion rate. Concrete resistivity is a geometry-independent material property that describes the electrical resistance, which is the ratio between applied voltage and resulting current in a unit cell. The current is carried by ions dissolved in the pore liquid. While some data exist on the relationship between moisture content on electrical resistivity of concrete, very little research has been conducted to evaluate the effect of chloride on the conduction of electricity through concrete. The purpose of this study is to examine and quantify the effect of pore water and chloride content on surface electrical resistivity measurement of concrete. It was obvious that chloride content had influenced the resistivity of concrete and the relationship showed a linear function. That is, concrete with chloride ions had a comparatively lower resistivity. Chloride can lead to underestimate the electrical resistivity of concrete. Conclusively, this paper suggested the quantitative solution to depict the electrical resistivity of concrete with various chloride contents.

Relativistic shocks are one of the most plausible sites of the emission of strongly variable, polarized multi-wavelength emission from relativistic jet sources such as blazars, via diffusive shock acceleration (DSA) of relativistic particles. This paper summarizes recent results on a self-consistent coupling of diffusive shock acceleration and radiation transfer in blazar jets. We demonstrate that the observed spectral energy distributions (SEDs) of blazars strongly constrain the nature of hydromagnetic turbulence responsible for pitch-angle scattering by requiring a strongly energy-dependent pitch-angle mean free path. The prominent soft X-ray excess (``Big Blue Bump'') in the SED of the BL Lac object AO 0235+164 can be modelled as the signature of bulk Compton scattering of external radiation fields by the thermal electron population, which places additional constraints on the level of hydromagnetic turbulence. It has further been demonstrated that internal shocks propagating in a jet pervaded by a helical magnetic field naturally produce polarization-angle swings by 180$^o$, in tandem with multi-wavelength flaring activity, without requiring any helical motion paths or other asymmetric jet structures. The specific application of this model to 3C279 presents the first consistent, simultaneous modeling of snap-shot SEDs, multi-wavelength light curves and time-dependent polarization signatures of a blazar during a polarization-angle (PA) rotation. This model has recently been generalized to a lepto-hadronic model, in which the high-energy emission is dominated by proton synchrotron radiation. It is shown that in this case, the high-energy (X-ray and $\gamma$-ray) polarization signatures are expected to be significantly more stable (not showing PA rotations) than the low-energy (electron-synchrotron) signatures.

Nanofiber (NF) products exhibit outstanding performances in the materials science, textile, and medical fields, which cannot be realized using conventional technologies. However, the safety of such products is debated because of the potential risk of nanomaterials and lack of standardized guidelines for safely evaluating NF products. The global safety evaluations of nanomaterials focused on evaluating the cytotoxicity of zero-dimensional materials including nanoparticles and nanotubes based on OECD criteria. The NFs are one-dimensional materials with nanometer diameters and considerable lengths. Many fibers are applied in a densely woven web-like form, and therefore, assessing cellular penetration and fiber toxicity using the same methods is inappropriate. This study verifies the safety of polyurethane (PU) and polyvinylidene fluoride (PVDF) polymers, which are currently applied in filters and masks. To this end, polymer NFs were collected from each product, and the NFs were compared with reference samples considering their physical properties using FT-IR and Raman spectroscopy. For the safety evaluation, DMSO stocks of varying concentrations of PVDF and PU NFs (at 0.5, 1, 5, and 10 μg/mL) were prepared, and the cytotoxicity and inhibitory effects on nitric oxide production and protein expression obtained via Western blot were identified.

We investigate the structural correlation of non-covalent crown ether/H+/L-tryptophan (CR/TrpH+) host-guest complexes in the solution phase with those in the gas phase generated through electrospray ionization/mass spectrometry (ESI/MS) techniques. We perform quantum chemical calculations to determine their structures, relative Gibbs free energies, and infrared spectra. We compare the calculated infrared (IR) spectra with the IR multiphoton dissociation (IRMPD) spectra observed for the 18-Crown-6/TrpH+ complex by Polfer and co-workers [J. Phys. Chem. A 2013, 117, 1181−1188] for assigning the IR bands. We observe that the carboxyl group remains ‘naked’, lacking hydrogen bonding with the CR unit in the gas phase, and that this most stable conformer originates from the corresponding lowest Gibbs free energy structure in solution. Based on these findings, we propose that gas phase host-guest complexes directly correlate with those in solution, reinforcing the possibility of obtaining invaluable information about host-guest-solvent interactions in solution from the structure of the host-guest pair in the gas phase.

Human adipose stem cell-derived extracellular vesicles (hASC-EVs) are key mediators of paracrine signaling with promising therapeutic applications. Although hASC-EVs are derived from human cells and are less immunogenic, their immunogenicity cannot be completely excluded. Here, we evaluate the immune responses of ICR and C57BL/6 mice to high doses of hASC-EVs for 10 days after injection. Lymphocyte subpopulations are analyzed using flow cytometry at 0.5, 1, 3 and 24 h post injection. In the spleen and blood of C57BL/6 mice, neutrophils sharply increased at 0.5 h and decreased at 3 h following hASC-EV treatment. We observe increased proportions of monocytes, macrophages, and natural killer cells at 3 h but returned to similar level of vehicle control at 24 h post injection in the spleen and blood of ICR mice. Although the in vivo experiments reveal different immune responses to hASC-EV treatment in C57BL/6 and ICR strains, no major changes occur in human peripheral blood mononuclear cell composition after applying hASC-EVs in vitro. In conclusion, unlike those in mice, immune responses to hASC-EVs in humans are not detectable, indicating a minimal risk of fatal side-effects from hASC-EV-based therapies.

Transient receptor potential melastatin-8 (TRPM8) is a cation channel that is activated by cold and “cooling agents” such as menthol and icilin, which induce a cold sensation. Stimulation of TRPM8 activates an intracellular signaling cascade that ultimately leads to a change in the gene expression pattern of the cells. Here, we investigated the TRPM8-induced signaling pathway that links TRPM8 channel activation to gene transcription. Using a pharmacological approach, we show that inhibition of phosphatidylinositol 4-phosphate 5 kinase alpha (PIP5K), an enzyme essential for the biosynthesis of phosphatidylinositol 4,5-bisphosphate, attenuated TRPM8-induced gene transcription. Analyzing the link between TRPM8 and Gq proteins, we show that pharmacological inhibition of the beta gamma subunits impairs TRPM8 signaling. In addition, genetic studies showed that TRPM8 requires an activated Galpha subunit for signaling. In the nucleus, the TRPM8-induced signaling cascade triggers an activation of the transcription factor AP-1, a complex consisting of a dimer of basic region leucine zipper (bZIP) transcription factors. Here, we identified the bZIP protein c-Jun as an essential component of AP-1 within the TRPM8-induced signling cscade. In summary, with PIP5K, Gq subunits and c-Jun we have identified key molecules in the TRPM8-induced signaling from the plasma membrane to the nucleus.

Ecosystem physical structure, defined by the quantity and spatial distribution of biomass, influences a range of ecosystem functions. Remote sensing tools permit the non-destructive characterization of canopy and root features, potentially providing opportunities to link above- and belowground structure at fine spatial resolution in functionally meaningful ways. To test this possibility, we employed ground-based portable canopy lidar (PCL) and ground penetrating radar (GPR) along co-located transects in forested sites spanning multiple stages of ecosystem development and, consequently, of structural complexity. We examined canopy and root structural data for coherence at multiple spatial scales ≤ 10 m within each site using wavelet analysis. Forest sites varied substantially in vertical canopy and root structure, with leaf area index and root mass more evenly distributed by height and depth, respectively, as forests aged. In all sites, above- and belowground structure, characterized as mean maximum canopy height and root mass, exhibited significant coherence at a scale of 3.5-4 meters, and results suggest that the scale of coherence may increase with stand age. Our findings demonstrate that canopy and root structure are linked at characteristic spatial scales, which provides the basis to optimize scales of observation. Our study highlights the potential, and limitations, for fusing lidar and radar technologies to quantitatively couple above- and belowground ecosystem structure.

Recently, cobalt iron boron (CoFeB) thin films have been widely investigated to apply to magnetic sensors, due to their high magnetic moment, anisotropy, and stability. However, most of these studies are conducted on rigid silicon substrates. For more diverse applications of magnetic sensors and angle sensors, it is important to explore the properties of ferromagnetic thin films grown on non-rigid deformable substrates. Here, using representative deformable substrates such as polyimide (PI), polyethylene naphthalate (PEN) and polydimethylsiloxane (PDMS) that can be bent or stretched, we report experimental comparison of in-plane magnetic field angle-dependent properties of the amorphous Ta/CoFeB/MgO/Ta thin film which is grown on those deformable substrates. We investigate effects of substrate roughness, tensile stress, characteristics of deformable substrates, and sputtering process on the change of magnetic properties like coercive field (Hc), remanence over saturation magnetization (Mr/Ms), and their biaxial characteristics. This work presents unconventional foundations for exploring deformable magnetic sensors capable of detecting magnetic field angle.

Objective: Studies in Sports Psychology and Sociology have validated causality in team-sport athletes by using emotional intelligence as a variable. This study aimed to examine the causal relationship between the types of autonomy support coaching, emotional intelligence, and interruption intention as psychosocial variables among current taekwondo athletes in Korea.Methods: In this study, 217 adult or university athletes registered in the Korea Taekwondo Association in 2020 were evaluated for the type of autonomy support coaching, emotional intelligence, and interruption intention. Results: Autonomy support coaching recognized by taekwondo athletes has a negative and positive effect on interruption intention and emotional intelligence, respectively. Moreover, emotional intelligence has a negative effect on interruption intention. which revealed that autonomy support coaching has a negative effect on interruption intention through emotional intelligence.Conclusions: Such outcomes can serve as a foundation for athletes to have the opportunity to participate in sports in a mature manner and promote positive changes in sports culture. In other words, the sensibility of the athletes can be harmoniously symmetry.

Objective: Studies in Sports Psychology and Sociology have validated causality in team-sport athletes by using emotional intelligence as a variable. This study aimed to examine the causal relationship between the types of autonomy support coaching, emotional intelligence, and interruption intention as psychosocial variables among current taekwondo athletes in Korea. Methods: In this study, 217 adult or university athletes registered in the Korea Taekwondo Association in 2020 were evaluated for the type of autonomy support coaching, emotional intelligence, and interruption intention. Results: Autonomy support coaching recognized by taekwondo athletes has a negative and positive effect on interruption intention and emotional intelligence, respectively. Moreover, emotional intelligence has a negative effect on interruption intention. which revealed that autonomy support coaching has a negative effect on interruption intention through emotional intelligence. Conclusions: Such outcomes can serve as a foundation for athletes to have the opportunity to participate in sports in a mature manner and promote positive changes in sports culture. In other words, the sensibility of the athletes can be harmoniously symmetry.

(1) Background: P-cadherin (CDH3) is a transmembrane protein that plays a crucial role in maintaining the structural integrity of epithelial tissue and homeostasis. Its role in carcinogenesis remains a subject of debate, as its behavior can vary depending on the molecular context and the specific tumor cell model under study. In this study, we explored the role of P-cadherin in head and neck squamous cell carcinoma (HNSCC) and the mechanism underlying its function. (2) Methods: We analyzed P-cadherin expression in HNSCC patients using The Cancer Genome Atlas (TCGA) database. For in vitro functional analysis, we conducted proliferation, migration, invasion, and western blot assays after either suppressing or overexpressing P-cadherin. For in vivo functional analysis, we utilized mouse xenograft models. (3) Results: P-cadherin was significantly overex-pressed in tumor samples compared to normal samples in the TCGA-HNSCC cohort. P-cadherin knockdown resulted in decreased proliferation, migration, and invasion compared to control cells, while P-cadherin overexpression increased cell proliferation and migration in HNSCC cells. We discovered that c-Met functioned as an upstream regulator of P-cadherin. Surprisingly, we found that P-cadherin knockdown increased the phosphorylation of c-Met and STAT3. Combining P-cadherin siRNA with the c-Met inhibitor SU11274 resulted in a more effective reduction in HNSCC cell growth, both in vitro and in vivo, compared to either treatment alone. (4) Conclusions: Our study uncovered a previously unknown aspect of P-cadherin-mediated c-Met regulation. The enhanced activation of c-Met/STAT3 following P-cadherin inhibition could be responsible for the survival of resistant tumor cells. Therefore, dual inhibition of P-cadherin and c-Met may be a potentially effective approach for treating HNSCC.

In recent years, bone tissue engineering (BTE) has made significant progress in promoting the direct and functional connection between bone and graft, including osseointegration and osteoconduction, to facilitate the healing of damaged bone tissues. Herein, we introduce a new, environmentally friendly, and cost-effective method for synthesizing reduced graphene oxide (rGO) and hydroxyapatite (HAp). The method uses epigallocatechin-3-O-gallate (EGCG) as a reducing agent to synthesize rGO (E-rGO), and HAp powder is obtained from Atlantic bluefin tuna (Thunnus thynnus). The physicochemical analysis indicated that the E-rGO/HAp composites had exceptional properties for use as BTE scaffolds, as well as high purity. Moreover, we discovered that E-rGO/HAp composites facilitated not only proliferation, but also early and late osteogenic differentiation of human mesenchymal stem cells (hMSCs). Our work suggests that E-rGO/HAp composites may play a significant role in promoting the spontaneous osteogenic differentiation of hMSCs, and we envision that the E-rGO/HAp composites could serve as promising candidates for BTE scaffolds, stem cell differentiation stimulators, and implantable device components due to their biocompatible and bioactive properties. Overall, we suggest a new approach for developing cost-effective and environmentally friendly E-rGO/HAp composite materials for BTE application.

The contact materials in high-voltage vacuum interrupter require properties such as high conductivity, high density, and high hardness to minimize arc heat damage. In this study, copper–molybdenum-chromium alloys contact materials are examined for a high voltage contact material. Ball milling process was carried out after analyzing the raw materials of copper, chromium, and molybdenum powders. A green compact was produced using a high press with the mixed powder. Afterwards, composite was produced by sintering method according to temperature and infiltration method according to Cu content in green compact. The composite of sintering method showed a density of 8.55 g/cm3 (relative density 93%) a hardness of 217 HV, and an electrical conductivity of 40.7 IACS% at 1200 °C. The composite of 10 wt.% Cu produced by the Cu infiltration method showed a density of 8.7 g/cm3 (relative density 94%), Hardness of 274HV and electrical conductivity of 39 IACS% at 1300 °C. The measurements of physical properties showed the new possibility of using the Cu–Cr–Mo alloy as a contact material for high-voltage vacuum interrupters.

: The primary objective of this study was to investigate the association of certain genetic alterations and intraoperative fluorescent activity of 5-aminolevulinic acid (ALA) in brain metastasis (BM) of lung adenocarcinoma. A retrospective cohort study was conducted among 72 patients who underwent surgical resection of BM from lung adenocarcinoma at our institute for 5 years. Cancer cell infiltration was estimated by the intraoperative fluorescent activity of 5-ALA, and genetic alterations were analyzed by next-generation sequencing (NGS). The sensitivity and specificity for detecting cancer cell infiltration using 5-ALA were 87.5% and 96.4%, respectively. Genes associated with cell cycle regulation (p = 0.003) and cell proliferation (p = 0.044) were significantly associated with positive fluorescence activity of 5-ALA in the adjacent brain tissue. Genetic alterations in cell cycle regulation and cell proliferation were also associated with shorter recurrence-free survival (p = 0.013 and p = 0.042, respectively) and overall survival (p = 0.026 and p = 0.042, respectively) in the multivariate analysis. The results suggest that genetic alterations in cell cycle regulation and cell proliferation are associated with positive fluorescence activity of 5-ALA in the adjacent infiltrative brain tissue and influence the clinical outcome of BM of lung adenocarcinoma.

This study aimed to evaluate the safety and tolerability of STP1, a combination of ibudilast and bumetanide, tailored for the treatment of a specific subgroup of patients with Autism Spectrum Disorder (ASD), namely ASD Phenotype 1 (ASD-Phen1). We conducted a randomized, double-blind, placebo-controlled, parallel-group phase 1b study with two 14-day treatment phases (registered at clinicaltrials.gov as NCT04644003). Nine ASD-Phen1 patients were administered STP1, while three received a placebo. We assessed safety and tolerability, along with electrophysiological markers, such as EEG, Auditory Habituation, and Auditory Chirp Synchronization, to better understand STP1's mechanism of action. Additionally, we used several clinical scales to measure treatment outcomes. The results showed that STP1 was safe and well-tolerated, with electrophysiological markers indicating a significant and dose-related reduction of gamma power in the whole brain and in brain areas associated with executive function and memory. Treatment with STP1 also increased alpha 2 power in frontal and occipital regions and improved habituation and neural synchronization to auditory chirps. Although numerical improvements were observed in several clinical scales, they did not reach statistical significance. Overall, this study suggests that STP1 is safe and well-tolerated in ASD-Phen1 patients and shows indirect target engagement in ASD brain regions of interest.

Studies on the cutting propagation of plants belonging to the genus Rhododendron are limited to R. mucronulatum and R. yedoense, which are mainly used as ornamental flowering trees, and additional studies on a greater variety of species are required. This study examined the characterisitics of cutting propagation according to treatment with growth regulators indole-3-butyric acid (IBA) and α-naphthaleneacetic acid (NAA) to generate basic data on the methods of reproducing R. micarnthum Turcz.. The number of roots (r=0.740**), length of root (r=0.844**), and number of leaves (r=0.649**) affected the rooting rate of R. micarnthum Turcz., and the number of roots (r=0.646**), length of roots (r=0.673**), number of leaves (r=0.738**), and chlorophyll content (r=0.710**) affected the survival rate. Further, the rooting and survival rates were highly correlated (r=0.794**). The growth characteristics of underground sections after growth regulator treatment were as follows: the number of formed roots was 7.0 and 7.2, and the length of roots was 6.2 cm and 5.3 cm in 150 mg·L-1 and 250 mg·L-1 NAA treatment groups, respectively. The rooting rate was 60% or above in the growth regulator treatment groups compared to that in the control group. Particularly, the rooting rates of 150 mg·L-1 and 250 mg·L-1 NAA treatment groups were 90% or above, and the latent period before rooting was shorter than other treatment groups at approximately 14 days, which was considered to be effective for root growth. The aboveground growth characteristics after propagating the cuttings showed that groups treated with 150 mg·L-1 and 250 mg·L-1 NAA showed a significantly higher plant length (5.2-5.8 cm), number of leaves (6.2 and 6.9), and leaf-length and leaf-width as compared to other treatment groups. Moreover, the survival rates of 150 mg·L-1 and 250 mg·L-1 NAA treatment groups were 80% or above, and the sound root growth manifested in the tendency of good aboveground growth. Additionally, IBA and NAA were highly correlated to the rooting and survival rates during cutting propagation of R. micarnthum Turcz.. The rooting and survival rates increased with the increase in growth regulator concentration. Particularly, NAA had a higher correlation to the rooting and survival rates than IBA (r=0.7316**, 0.7013**). Thus, R. micarnthum Turcz. could be propagated through cutting. Growth regulator treatment with 150 mg·L-1 and 250 mg·L-1 of NAA was effective for rooting and root growth of cutting, and these treatments were considered appropriate because the effects of aboveground growth were positive.

System-of-systems (SoS) evolution is a complex and unpredictable process. Although various principles to facilitate collaborative SoS evolution have been proposed, there is a lack of experimental data validating their effectiveness. To address these issues, we present an Agent-Based Model (ABM) for SoS evolution in the Internet of Vehicles (IoV) , serving as a quantitative analysis tool for SoS research. By integrating multiple complex and rational behaviors of individuals, we aim to simulate real-world scenarios as accurately as possible. To simulate the SoS evolution process, our model employs multiple agents with autonomous interactions and incorporates external environmental variables. Furthermore, we propose three evaluation metrics: evolutionary time, degree of variation, and evolutionary cost, to assess the performance of SoS evolution. Our study demonstrates that enhanced information transparency significantly improves the evolutionary performance of distributed SoS. Conversely, the adoption of uniform standards only brings limited performance enhancement to distributed SoSs. Although our proposed model has limitations, it stands out from other approaches that utilize Agent-Based Modeling to analyze SoS theories. Our model focuses on realistic problem contexts and simulates realistic interaction behaviors. This study enhances the comprehension of SoS evolution processes and provides valuable insights for the formulation of effective evolutionary strategies.

OBJECTIVE: Although 3D-printed anatomic models are not new to medicine, the high costs and lengthy production times entailed have limited their application. Our goal was developing a new and less costly 3D modeling method to depict organ-tumor relations at faster printing speeds. METHODS: We have devised a method of 3D modeling using DICOM images. Coordinates are extracted at a specified interval, connecting them to create mesh-work replicas. Adjacent constructs are depicted by density variations, showing anatomic targets (ie, tumors) in contrasting color. RESULTS: An array of organ solid-tumor models were printed via Fused Deposition Modeling 3D printer at significantly less cost ($0.05/cm3) and time expenditure (1.73 min/cm3; both, p<.001). Printed models helped promote visual appreciation of organ-tumor anatomy and adjacent tissues. Our mesh-work 3D thyroidal prototype reproduced glangular size/contour and tumor location, readily approximating the surgical specimen. CONCLUSIONS: This newly devised mesh-type 3D printing method may facilitate anatomic modeling for personalized care and improve patient awareness during informed surgical consent.

Xerostomia is a subjective symptom of dry mouth resulting from various causes, including side effects of medication, systemic disorders, radiation, and Sjögren’s syndrome. Recently, the number of patients afflicted with xerostomia has increased due to an increase in the elderly population and patients on medication.; (2) Methods: A systematic approach is required to determine the etiology and management of xerostomia. This review summarizes recent literatures on the diagnosis and management of xerostomia.; (3) Results: A patient with xerostomia experiences difficulty in chewing, swallowing, speaking, tasting, and maintaining oral hygiene. Xerostomia and hyposalivation are uncomfortable side-effects in many patients. Assessing the function of the salivary gland is essential for selecting an appropriate treatment, improving symptoms, and preventing oral complications. Also, a more systematic approach is required to differentiate the subjective symptoms of the patient from the objective hyposalivation.; and (4) Conclusions: Although there is no standardized treatment for xerostomia, doctors need to endeavor and adapt the various treatments of xerostomia, to unearth the optimal treatment required for the patient.

Resistance of tumor cells to anticancer drugs is a major obstacle in tumor therapy. In this study, we investigated the mechanism of cordycepin-mediated resensitization to cisplatin inT24R2, a derived T24 cell line. Treatment with cordycepin or cisplatin (2 g/ml) alone could not induce cell death of T24R2, but combination treatment of these drugs significantly induced apoptosis of the cells through mitochondrial pathway including depolarization of mitochondrial membrane, decrease of anti-apoptotic proteins, Bcl-2, Bcl-xL, and Mcl-1, and increase of pro-apoptotic proteins, Bak and Bax. . High expression of MDR1 was the cause of cisplatin resistance in T24R2, and cordycepin significantly reduced MDR1 expression through inhibition of MDR1 promoter activity. MDR1 promoter activity was dependent on a transcription factor, Ets-1, in T24R2 cells. Although there is a correlation between MDR1 and Ets-1 expression in bladder cancer patients, active Ets-1, Thr-38 phosphorylated form (pThr-38), was critical to induce MDR1 expression. Cordycepin decreased pThr-38 Ets-1 level through inhibition of AKT, which reduced MDR1 transcription and induced the resensitization of T24R2 to cisplatin. The results suggest that cordycepin effectively resensitizes cisplatin-resistant bladder cancer cells to cisplatin, thus serving as a potential strategy for treatment of anti-cancer drug resistant patients.

World Health Organization (WHO) provides the guideline for managing the Particulate Matter (PM) level because when the PM level is higher, it threats the human health. For managing PM level, the procedure for measuring PM value is needed firstly. We use Tapered Element Oscillating Microbalance (TEOM)-based PM measuring sensors because it shows higher cost-effectiveness than Beta Attenuation Monitor (BAM)-based sensor. However, TEOM-based sensor has higher probability of malfunctioning than BAM-based sensor. In this paper, we call the overall malfunction as an anomaly, and we aim to detect anomalies for the maintenance of PM measuring sensors. We propose a novel architecture for solving the above aim that named as Hypothesis Pruning Generative Adversarial Network (HP-GAN). We experimentally compare the several anomaly detection architectures to certify ours performing better.

In electric circuits, energy is delivered by electromagnetic fields through the space, as suggested by Kraus and Carver. They provide insights by showing electric/magnetic fields and Poynting vector directions around a DC circuit. In this work, the energy flow mechanism by Kraus and Carver is further studied theoretically for arbitrary terminal potentials of a DC power source.

Hypoeutectic Al-Si-Cu-Mg alloys are promising candidates for use in automobile parts. Therefore, various attempts have been made to develop alternative casting technologies to improve the mechanical properties of cast alloys. In this study, the effects of modification with different levels of strontium (Sr) on primary and eutectic silicon (Si) in hypoeutectic Al-Si-Cu-Mg alloys were investigated. Using a gravity cast process, the Sr-modified samples were prepared from melts with four levels (100, 200, 300, and 400 ppm) of Sr. In addition, the wear properties of the cast samples were studied using a block-on-ring wear-testing machine. The sizes of the primary Si phases increased with increasing Sr content in the alloys. Moreover, more finely dispersed eutectic Si was observed with higher Sr content. In frictional wear tests, the specific wear rates of the test specimens decreased as the Sr content increased from 200 to 400 ppm. Coarse Si phases are considered to act as solid lubricants in the contact region during sliding.

Abstract: The frequency and intensity of air pollution are two of most critical issues the world faces in dealing with global environmental problems. They are both important areas that need to be improved. Our previous research [20] examines the assessment of fine dust pollution in Baekryeong island by statistical reasoning through one specific example of inland city (Yanggu) in Republic of Korea; however, given that Baekryeong Island is a remote island, there has been little focus on in-depth examination of its effect on the high density of fine dust in Baekryeong Island. The purpose of this article is twofold: (i) to examine the effect of a remote island on the high density of fine dust on Baekryeong Island using statistical reasoning and to provide a more specific statistical basis for the claim that one of the non-negligible factors influencing the high density of fine dust on Baekryeong Island is the geographic proximity to China; and (ii) to present brief discussion of fundamental cause of fine dust and global air pollution issues, which are not discussed in [20].

Water pollution, intensified by the release of hard-to-degrade pollutants, poses severe threats to ecosystems, human health, and economic development. The existing advanced oxidation processes often involve high operational costs and may result in secondary pollution, highlighting the necessity for innovative and more sustainable solutions. To address these challenges, our study introduces a cost-effective and eco-friendly corona discharge barrier plasma discharger for wastewater treatment. Through the central composite design/response surface methodology, a high decolorization rate of 98% of methylene blue (MB) within 10 minutes was achieved by optimizing parameters such as pH and voltage. Furthermore, the mechanisms of the generation of reactive oxygen species via this device was discussed in detail and the degradation pathways of MB were described. Moreover, this device is also very energy-efficient, with a low energy density and electrical energy per order of 0.15 watt/mL and 5.79 kWh/m³/order, respectively. In conclusion, the plasma discharger developed in this study provides a cost-effective and environmentally sustainable solution for dye wastewater treatment. This research contributes significantly to the advancement of sustainable dye wastewater management practices, offering an innovative method that meets both environmental and economic objectives.

The recycling, incineration, and final disposal rate of municipal solid waste (MSW) are calculated based on the total amount of waste input to each facility in many countries. These statistic data have serious limitation in setting the national goal and policy for effective waste management because it is not considering the amount of foreign objectives in the process of each life-cycle stage. This case study is to estimate the actual rates of recycling, incineration, and final disposal by material flow analysis (MFA) after the collection of MSW in Korea. The actual rates of recycling, incineration and final disposal for MSW in 2016 were 49.9%, 32.9% and 23.1% respectively, indicating that the recycling rate was lower by 10.1%, while the incineration and final disposal rates were raised by 7.6% and 8.4% respectively, compared with the statistics for current MSW. In addition, the changed actual rates of recycling, incineration treatment, and final landfill, and variation of waste treatment charge according to treated amounts per treatment method was analyzed. This results of this study will contribute to establish national level of plan on effective waste management.

Recently, smart mobility intelligent traffic services have become a critical task in Intelligent Transportation Systems (ITS). This involves not only the use of advanced sensors and controllers but also the ability to respond to real-time traffic situations at intersections, alleviate congestion, and generate policies to prevent traffic jams. DRL (Deep Reinforcement Learning) provides a natural framework for processing tasks. In DRL, each intersection can control itself and coordinate with neighbors to achieve optimal network-wide policies. However, comparing approaches remains a challenging task due to the existence of numerous possible configurations. This research performs a critical comparison of various traffic controllers found in the literature. It demonstrates that using a nonlinear approximator for coordination mechanisms and enhancing observability at each intersection are key performance drivers.

Functional health literacy is the ability to read, write, and speak about health. Functional health literacy events can nudge the development of children’s health identity when using valid and reliable reading materials that portray the “what, where, when, why, and with whom” to eat nutritious foods and be physically active. Children who lack social role models for healthy eating and physical activity may also lack development in language and motor skills. Therefore, literacy-rich environments are needed when developing cognitive-motor language skills with children. Children with obesogenic body frames can gain from the production of childcentric health narratives that draw upon the Habits of Mind and Habits of Health© Model to produce Electronic Texts for Health Literacy©. When health professionals plan and implement functional health literacy events so children can read, write, and speak about their own health, new behavioral patterns and routines emerge into performances of understanding. Constructivist pedagogical approaches can help children to create health narratives using multimodal language while practicing health literacy skills as a foundational impetus to health behaviors. Children who struggle with obesity can also gain social agency when writing with peer partners who serve as supportive collaborators when developing interactive health literacy.

In the recent concrete industry, high fluidity concrete is being widely used for the pouring of dense reinforced concrete. Normally, in the case of high fluidity concrete, it includes high binder contents, so it is necessary to replace part of the cement through admixtures such as fly ash to procure economic feasibility and durability. This study shows the mechanical properties and field applicability of high fluidity concrete that using mass of fly ash as alternative materials of cement. The high fluidity concrete mixed with 50% fly ash was measured to manufacture concrete that applies low water/binder ratio to measure the mechanical characteristics as compressive strength and elastic modulus. Also, in order to evaluate the field applicability, high fluidity concrete containing high volume fly ash was evaluated that fluidity, compressive strength, heat of hydration and drying shrinkage of concrete.

It is postulated in this research that the paradox of “advances in technology and management not keeping pace with the ever-increasing urban problems” is due to the poor understanding of person-focused governance of societal, environmental and economic entities. Therefore, the objective of this paper is to present an adaptive institutional model of person-driven effectiveness and ineffectiveness. The model proposes that human, ecologic and economic outcomes are heavily influenced by a complex system of systems, spanning from individually unique “non-physical influencers” to a broader set of social and environmental influencers that have a common impact on the larger society-environment-economy (SEE) system. At the heart of the model is an analytic formulation that explains the phenomena of non-physical blocker, enhancer and indifferent that are responsible for the adaptation and maladaptation of social agents, and accordingly for the sustainability and unsustainability of SEE systems. Examples are provided to illustrate the model applications: (a) the non-physical and maladaptive syndromes as antecedents of multi-morbidity and (b) the broadened and narrowed minds as sources of sustainability and unsustainability at the SEE system level within the context of emerging technologies such as engineered nanomaterials.

Environmental deterioration factors are constantly increasing, causing unwanted aesthetic changes to stone artworks due to exposure to various physical and chemical deterioration factors. Inorganic nanoparticle-filled polymer composites have extended their multiple functionalities to various applications, including cultural heritage conservation. Therefore, this study has examined the effects of clay, SiO2, Ca(OH)2 and CaCO3 nanomaterials in the enhancement of the physicomechanical properties of limestone monuments, the aim of the present work being to evaluate comparatively the effectiveness of nanoparticles as consolidation and protection material for limestone artworks. The nanoparticles were added to an acrylic-based copolymer (polyethylmethacrylate (EMA)/methylacrylate (MA) (70/30), in order to improve its physiochemical and mechanical properties, and produced a significant improvement in the ability of the polymers to consolidate and protect the stone. The synthesis process of nanoparticles/polymer nanocomposite has been prepared by an in situ emulsion polymerization system. The nanocomposites contained poly (EMA/MA) with a solid content of 3% [poly (EMA/MA)] in the absence and presence of 5% nanoparticles (0.15 g nanoparticles). Samples were subjected to artificial aging by relative humidity/temperature and acid/salt crystallization weathering to show the optimum conditions of durability and the effectiveness of the nano-mixture in improving the physical and mechanical properties of the stone material. To ensure that the treatment had no negative effects on the physical characteristics of the limestone, the properties of the treated limestone samples were evaluated comparatively before and after artificial aging by the conduct of microstructural (phase morphology studied by means of scanning electron microscopy) and aesthetic (colour and lightness measured by spectrophotometry) analyses. Also used were measurement of static contact angle of water droplets on the surface of the samples, total immersion water absorption, compressive strength, and abrasion resistance test. Results demonstrated that the addition of nanoparticles to an acrylic-based polymer enhanced its capability to consolidate and protect the limestone samples.

Saikosaponin (SS) a is a compound with various pharmacological properties and easily degraded into SSb1 and SSg in acid condition. In present work another two new degradation products of SSa formed under acid hydrolytic condition were detected and isolated by analytical and semi-preparative liquid chromatography technology, furthermore their structures were characterized as hydroxyl-saikosaponin a and SSb2 by spectral analysis, which is not only essential in stability-indicating method development and validation but also could be used as a worst case to assess the analytical method performance of SSa. Moreover their structural transformation pathways were also proposed.

For the elimination of radio-frequency interference (RFI) in a passive microwave radiometer, the threshold level is generally calculated from the mean value and standard deviation. However, a serious problem that can arise is an error in the retrieved brightness temperature from a higher threshold level owing to the presence of RFI. In this paper, we propose a method to detect and mitigate RFI contamination using the threshold level from statistical criteria based on a spectrogram technique. Mean and skewness spectrograms are created from a brightness temperature spectrogram by shifting the 2-D window to discriminate the form of the symmetric distribution as a natural thermal emission signal. From the remaining bins of the mean spectrogram eliminated by RFI-flagged bins in the skewness spectrogram for data captured at 0.1-s intervals, two distribution sides are identically created from the left side of the distribution by changing the standard position of the distribution. Simultaneously, kurtosis calculations from these bins for each symmetric distribution are repeatedly performed to determine the retrieved brightness temperature corresponding to the closest kurtosis value of three. The performance is evaluated using experimental data, and the error in the retrieved brightness temperature is observed to be less than approximately 3 K from a window with a size of 100 × 100 time-frequency bins according to the RFI levels and cases.

In the present work, we designed a mild strategy to make Cu₂(OH)PO₄ (CHP) nanoparticles on cotton fabrics (CFs) to achieve multi-functionalities. The phytic acid (IP6) assisted method was employed to synthesize nanoparticles (CHP-IP6). Under Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) as well as thermogravimetric analysis (TGA), we characterized the coated cotton fabrics. The CHP-IP6 treated fabrics showed prominent photocatalytic activity, excellent photocatalytic stability and thorough discoloration of methylene blue (MB) stain under sunlight irradiation.

This study aims to spatially analyze the distribution characteristics of vacant homes in Asan-si, Chungcheongnam-do, and understand the differences in factors causing vacant homes by type. We use a variety of statistical methods to examine these factors and identify key influencing factors such as the number of vacant stores, changes in overall population, land use complexity, and physical characteristics of land and buildings. The findings reveal that the factors contributing to the occurrence of vacant homes vary significantly by region and property type, highlighting the need for region-specific policies. For instance, in old town areas, small lot ratios and land use complexity are significant, while in rural village, the average number of floors and land use complexity play a major role. This study underscores the diversity of factors influencing vacant homes, suggesting that policies should be tailored to the unique characteristics of different regions to effectively address this issue.

This narrative review provides a thorough examination of medication-related osteonecrosis of the jaw (MRONJ), encompassing its etiology, the role of drug holidays, and contemporary treatment approaches. By systematically analyzing literature from 2022 to 2023, this paper synthesizes the latest findings and trends in MRONJ research. The study emphasizes the importance of a holistic understanding of MRONJ, beginning with its etiological factors, assessing the therapeutic implications of drug holidays, and evaluating the efficacy of current treatment modalities. This review aims to offer clinicians and researchers a consolidated resource, highlighting the intricacies of MRONJ management and proposing directions for future research. Through this comprehensive approach, the paper seeks to advance the understanding and treatment of MRONJ, ensuring an evidence-based, patient-centric approach in clinical practice.

Interrelationships between traditional dental variables are becoming more evident in far reaching aspects of life such as psychosocial interaction, self-esteem, overall health and even occupational performance. This study compares quality of life (QoL) in postmenopausal women (PMW) with poor oral health (POH) with QoL in PMW with good oral health. 200 randomly recruited PMW received a dental evaluation and completed Utian Quality of Life Survey. The participants were divided into POH and healthy groups based on dental exam. Mean scores were calculated for each QoL item, domain and the overall summary score. For each of the four parameters for periodontitis diagnosis, periodontitis patients’ QoL outcomes were compared to those of healthy patients using T-test with threshold of significance at p<0.05. QoL in all fields measured were significantly poorer in the POH compared to the healthy patients, occupational (19.95±5.35vs. 27.56±6.13), health (18.02±8.23 vs. 26.59 ±6.45), emotional (15.68±10.22vs. 21.15±9.15), sexual (6.2±5.98vs. 10.02±5.35), and total score (60.21±25.85 vs. 84.26±22.35). This study finds that PMW with POH, report significantly poorer quality of life. Clinicians caring for PMW should be aware of that oral health impacts QoL and make appropriate referral decisions for patients’ dental care. Keywords: Quality of Life, Oral Health, Post-menopause, Women

This work communicates line strength data and associated scripts for computation and spectroscopic fitting of selected transitions of the diatomic molecules AlO, C2, CN, OH, N2+, NO, and TiO. For ease of use, the scripts for data analysis are designed for inclusion in various software packages or program languages. The accuracy of the data is of the order of less than one picometer, suitable for analysis of laser-induced fluorescence and laser-plasma spectra. Selected results demonstrate the applicability of the program for data analysis in laser-induced optical breakdown spectroscopy primarily at The University of Tennessee Space Institute, Center for Laser Applications. Representative spectra are calculated and referenced to measured data records.

Crystalline β-cobalt hydroxide (β-Co(OH)₂) of different morphologies have been successfully synthesized with the addition of sodium hydroxide to cobalt nitrate solution and aging in the mother liquor. The rate of NaOH addition, ranging from 0.1 mL/min to 10 mL/min, influences the surface morphology with the obtained storage capability of the respective electrode. Characterization of the β-Co(OH)₂ was fully developed, including X-ray diffraction, scanning and transmission electron microscopy, and BET analyses. At a lower rate of NaOH addition, particles are like platelets, while for a higher rate (≥2 mL/min) grains are fused together forming a larger crystallite size. This result is supported by the X-ray diffraction structural analysis, where the phase evolution of (002) plane becomes distinct for the higher rate of NaOH addition. Lithium cobalt oxide (LiCoO₂) was synthesized through oxidation from the as-prepared β-Co(OH)₂ and LiOH. The electrochemical performance of as obtained LiCoO₂ is investigated using charge-discharge and cyclic voltammetric studies. The precursor β-Co(OH)₂ prepared at a lower rate of 0.1 mL/min in LiCoO₂ demonstrated the best electrochemical performance of 155 mAh/g. After 50 cycles, the capacity retention rate was 67% compared with the first cycle. Finally, we have attempted to correlate the amount of the available OH^- ions with the formation of platelets and the discharge capacity. This work has developed a methodology for the synthesis of LiCoO₂ using β-Co(OH)₂ in a facile chemical solution process.

Gas flaring is commonly used by industrial plants for processing oil and natural gases in the atmosphere, and hence is an important anthropogenic source for various pollutants including CO₂, CO, and aerosols. This study evaluates the feasibility of using satellite data to characterize gas flaring form space by focusing on the Khanty Mansiysk Autonomous Okrug in Russia, a region that is well known for its dominatingly gas flaring activities. Multiple satellite-based thermal anomaly data products at night are inter-compared and analyzed, including MODIS (Moderate Resolution Imaging Spectroradiometer) Terra level-2 Thermal Anomalies product (MOD14), MODIS Aqua level-2 Thermal Anomalies product (MYD14), VIIRS (Visible Infrared Imaging Radiometer Suite) Active Fires Applications Related Product (VAFP), and VIIRS level-2 data based Nightfire product (VNF). The analysis compares and contrasts the efficacy of these sensor products in detecting small, hot sources like flares on the ground in extremely cold environments such as Russia. We found that the VNF algorithm recently launched by NOAA has the unprecedented accuracy and efficiency in characterizing gas flares in the region owing primarily to the use of Shortwave Infrared (SWIR) bands. Reconciliation of VNF’s differences and similarities with other nighttime fire products is also conducted, indicating that MOD14/MYD14 and VAFP data are only effective in detecting those gas flaring pixels that are among the hottest in the region. Validation of VNF product of gas flaring location with Google Earth images are made. It is shown that that VNF’s estimates of gas flaring area (the area of gas flaming) agree well the counterparts from Google images with a linear correlation of 0.91, highlighting its potential use for routinely monitoring emissions of gas flaring from space.

With the rapid evolution of SARS-CoV-2, the emergence of new strains is an intriguing question. This paper presents an evolutionary theory to analyze the mutations of the virus and identify the conditions that lead to the generation of new strains. We represent the virus variants using a 4-letter sequence based on amino acid mutations on the spike protein and employ an n-distance algorithm to derive a variant phylogenetic tree. We show that the theoretically-derived tree aligns with experimental data on virus evolution. Additionally, we propose an A-X model, utilizing the set of existing mutation sites (A) and a set of randomly generated sites (X), to calculate the emergence of new strains. Our findings demonstrate that a sufficient number of random iterations can predict the generation of new macro-lineages when the number of sites in X is large enough. These results provide a crucial theoretical basis for understanding the evolution of SARS-CoV-2.

(1) Background : When placing implants in the maxillary posterior region with insufficient alveolar bone, a maxillary sinus elevation is necessary. Autogenous bone, though biologically ideal, poses risks and discomfort due to donor site harvesting. Block-type autogenous tooth bone graft material, made from the patient’s own extracted tooth, offers similar biological stability without these drawbacks; (2) Methods : This study observed the progress of 19 implant patients who were treated with maxillary sinus elevation procedures using block-type autogenous tooth bone graft material at the Daegu Catholic University Medical Center. Extracted teeth were processed into demineralized tooth block bone. After elevating the sinus membrane, implants and the tooth bone graft material were placed in the space, and the bony window was repositioned. Postoperative evaluations through clinical observation and radiographic imaging assessed sinus membrane elevation, alveolar bone height increase, and implant osseointegration; (3) Results : Results showed proportional increases in alveolar bone height to the graft material size, with long-term stability. No postoperative complications occurred, even with sinus membrane perforation, and implants remained stable; (4) Conclusions : The study concludes that maxillary sinus lifts using block-type autogenous tooth bone graft material provide excellent bone induction and biocompatibility, making it a highly beneficial method for both dentists and patients.

Currently, most plastic waste stems from packaging materials, with a large proportion of this waste either discarded or used to derive fuel. Accordingly, there is growing interest in the use of pyrolysis in the context of chemically recycling non-recyclable (i.e., via mechanical means) plastic waste into petrochemical feedstock. The aim of this study is to use kinetic analyses to elucidate the pyrolytic properties of solid recovered fuel (SRF) produced using two types of reactors, namely, fixed bed and fluidized bed reactors. From the kinetic analysis, the activation energy corresponding to the rate of pyrolysis reaction conversion was obtained. In conclusion, we found that the pyrolysis occurs more vigorously in fluidized bed reactors compared to fixed bed reactors.

Dental anxiety (DA) negatively affects patients’ oral and overall health. This study explored attitudes and clinical practices of licensed Ohio general dentists who treat patients with DA. Methods: An anonymous self-administered mail survey was sent to 500 general dentists licensed and practicing in Ohio. Responses to 21 pre-coded questions were analyzed. Frequencies were examined; cross-tabs, Chi-Square, and Fischer’s Exact Test were calculated for statements according to dentists’ gender. Alpha was set at p = 0.05. Results: Nearly all respondents treated anxious patients; males were more likely to find it challenging than females. Dentists were most familiar with distraction, although half found nitrous oxide to be an effective tool. Female dentists were more likely than males to be familiar with anxiolytics and find them effective. Conclusion: Overall, Ohio general dentists are most familiar with using distraction and nitrous oxide during appointments for anxious patients. Gender differences exist in attitudes towards anxiolytic use for patients with DA. Practice Implications: By identifying techniques that are comfortable for patient and practitioner, oral health disparities associated with DA may be reduced.

Carbazole is one of the typical heterocyclic aromatic compounds (NSO-HETs) observed in pol-luted urban atmosphere, which has become a serious environmental concern. The most im-portant atmospheric loss process of carbazole is the reaction with OH radical. The present work investigated the mechanism of OH-initiated atmospheric oxidation degradation of carbazole by using density functional theory (DFT) calculations at the M06-2X/6-311++G(3df,2p)//M06-2X/6-311+G(d,p) level. The rate constants were determined by the Rice-Ramsperger-Kassel-Marcus (RRKM) theory. The lifetime of carbazole determined by OH was compared with other typical NSO-HETs. The theoretical results show that the degradation of carbazole initiated by OH radical includes four types of reactions: OH additions to “bend” C atoms, OH additions to “benzene ring” C atoms, H abstractions from C-H bonds and the H ab-straction from N-H bond. The OH addition to C1 atom and the H abstraction from N-H bond are energetically favorable. The main oxidation products are hydroxycarbazole, dialdehyde, carba-zolequinone, carbazole-ol, hydroxy-carbazole-one and hydroperoxyl-carbazole-one. The calcu-lated overall rate constant of carbazole oxidation by OH radical is 6.52 × 10−12 cm3 molecule−1 s−1 and the atmospheric lifetime is 43.92 h under the condition of 298 K and 1 atm. The lifetime of carbazole determined by OH radical is similar with that of dibenzothiophene oxidation but longer than those of pyrrole, indole, dibenzofuran and fluorene. This work provides a better understanding of the reactivity of carbazole in the atmospheric environment, the formation of secondary organic aerosols, and the chemical degradation and removal of carbazole in the at-mospheric environment.

A number of studies have been conducted to improve the accessibility of images using touchscreen devices for screen reader users. In this study, we conducted a systematic review of 33 papers to get a holistic understanding of existing approaches and to suggest a research road map given identified gaps. As a result, we identified types of images, visual information, input device and feedback modalities that were studied for improving image accessibility using touchscreen devices. Findings also revealed that little has studied how to automate the generation of image-related information, and that screen reader users play important roles during the evaluation but the design process. Then we introduce two of our recent studies on the accessibility of artwork and comics, AccessArt and AccessComics respectively. Based on the identified key challenges, we suggest a research agenda for improving image accessibility for screen reader users.

The addition of active seed for increasing the precipitation rate leads to the formation of fine Al(OH)3 particles that complicates separation of solid from the mother liquor. In this study, the enhanced precipitation of coarse Al(OH)3 from sodium aluminate solution using active agglomerated seed was investigated. Aluminum salt (Al2(SO4)3) were used for active agglomerated seed precipitation at the initial of the process. About 50% of precipitation rate was obtained when these agglomerates were used as a seed in the amount of 20 g L–1 at 25 °C within 10 h. The agglomerated active seed and precipitate samples were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). SEM images showed that agglomerates consist of flake-like particles that can be stick together by bayerite (β-Al(OH)3) acting as a binder. The precipitation temperature above 35 °C and the high concentration of free alkali (αk &gt; 3) lead to the agglomerates refinement that can be associated with the bayerite dissolution.

This article develops algorithms for the characterization and the visualization of micro-scale features by using a small number of sample points, and with a goal to mitigate for the measurement shortcomings which are often destructive or time consuming. We implement the algorithms to rapidly examine the microscopic features of a Microelectromechanical System (MEMS) surface. Such images are highly dense; therefore, traditional image processing techniques might be computationally expensive. The contribution of this research include first, we develop local and global algorithm based on modified Thin Plate Spline (TPS) model to reconstruct high resolution images of the micro-surface’s topography, and its derivatives by using low resolution images. Second, we obtain a bending energy algorithm from our modified TPS model, and use it to filter out image defects. Finally, we develop a computationally efficient Windowing technique, which combines TPS and Linear Sequential Estimation (LSE), to enhance the visualization of images. The Windowing technique allows rapid image reconstruction based on the reduction of inverse problem.

Inflammation is a natural protective process through which the immune system responds to injury, infection, or irritation. However, hyperinflammation or long-term inflammatory response can cause various inflammatory diseases. Although idebenone was initially developed for the treatment of cognitive impairment and dementia, it is currently used to treat various diseases. However, its anti-inflammatory effects and regulatory functions in inflammatory diseases is yet to be elucidated. Therefore, this study aimed to investigate the anti-inflammatory effects of idebenone in cecal ligation puncture-induced sepsis and lipopolysaccharide-induced systemic inflammation. Murine models of cecal ligation puncture-induced sepsis and lipopolysaccharide-induced systemic inflammation were generated, followed by treatment with various concentrations of idebenone. Additionally, lipopolysaccharide-stimulated macrophages were treated with idebenone to elucidate its anti-inflammatory effects at the cellular level. Idebenone treatment significantly improved survival rate, protected against tissue damage, and decreased the expression of inflammatory enzymes and cytokines in mice models of sepsis and systemic inflammation. Additionally, idebenone treatment suppressed inflammatory responses in macrophages, inhibited the NF-κB signaling pathway, reduced reactive oxygen species and lipid peroxidation, and normalized the activities of antioxidant enzyme. Idebenone possesses potential therapeutic application as a novel anti-inflammatory agent in systemic inflammatory diseases and sepsis.

The development of printing technologies has enabled the realization of electric circuit fabrication on flexible substrate. However, the current technique remains restricted to single-layer patterning. In this paper, we demonstrate a fully solution-processable patterning approach for multi-layer circuits using a combined method of laser sintering and ablation. Selective laser sintering of silver (Ag) nanoparticle-based ink is applied to make conductive patterns on a heat-sensitive substrate and insulating layer. The laser beam path and irradiation fluence are controlled to create circuit patterns for flexible electronics. Microvia drilling using femtosecond laser through the polyvinylphenol-film insulating layer by laser ablation, as well as sequential coating of Ag ink and laser sintering, achieves an interlayer interconnection between multi-layer circuits. The dimension of microvia is determined by a sophisticated adjustment of laser focal position and intensity. Based on these methods, the flexible electronic circuit with chip-size-package light-emitting diodes was successfully fabricated and demonstrated with functional operations.

Background and Objective: Although whole body-electromyostimulation (WB-EMS) has been shown to favorably improve body composition in several research studies, it has not been confirmed how it affects adipose tissue-derived biomarkers and circumferences of the abdomen and thighs. Materials and Methods: Twenty participants of obese elderly women were randomly classified into an EMS group (EMSG; n = 10) or a non-EMS group (CON; n = 10). The WB-EMS suits used in this study enabled the simultaneous activation of 8 muscle groups with selectable intensities for each phase. Stimulation frequency was selected at 85 Hz, impulse-width at 350 μ seconds, and impulse-rise as a rectangular application. Impulse duration was 6 seconds with a 4-second break between impulses. The EMS sessions were combined with aerobic dancing 3 times a week for 12 weeks. Both groups received the same program; however, the CON did not receive electrical stimuli. Biomarkers and body composition including circumferences of the abdomen and thighs were measured on Week 0 and Week 12. Results: Compared with the CON, 1) a significant effect of the EMS-intervention concerning decreased body weight (p = 0.032) and increased basal metabolic rate (p = 0.029) were evident. The thigh subcutaneous fat and total fat of EMSG were not significantly changed, but those of CON were significantly increased after 12 weeks. 2) The biomarkers of CON either increased or showed no change, although the interleukin (IL)-6 was significantly (p = 0.028) decreased in EMSG. Specifically, C-reactive protein (CRP; p = 0.005) and alpha-fetoprotein (p = 0.050) of CON were significantly increased after 12 weeks. In addition, the IL-6 (p = 0.034), CRP (p = 0.001), carcinoembryonic antigen (p = 0.017), and low density lipoprotein (p = 0.005) of EMSG were lower than those of CON in the end of experiment. 3) Conclusions: The results indicate that EMS intervention improved body composition and reduced negative biomarkers, thus highlighting its effectiveness.

In this paper, a mathematical and physical interpretation of the length and the angle of the catenary curve made by the anchor chains was implemented, and the safety of an anchored vessel was reviewed. So far, holding force has been calculated approximately when the angle of the catenary curve of the anchor chain to the seafloor is 0°. In this study, the holding force equation was strictly derived for the case of anchor dragging. In addition, the equations for the angle and length of the catenary curve were mathematically derived when the anchor dragging occurs. The holding force equation derived in this paper are expected to help provide guidelines in vessel design or increase the safety of anchoring.

This study compares the performance of existing studies on multimodal emotion recognition, and proposes a model that fuses two modalities with the speaker's text and voice signals as input values and detects depression. Based on the DAIC-WOZ dataset, voice features were extracted using CNN, text features were extracted using Transformers, and two modalities were fused through a tensor fusion network. We also build a model to detect whether the speaker is depressed or not using LSTM in the final layer. This study suggests the possibility of increasing access to mental illness diagnosis by enabling patients to detect depression on their own in daily conversations. If the model proposed in this study is developed and the voice conversation system is connected, it will be easier for patients who cannot visit the hospital periodically or who are reluctant to visit the hospital to check their condition and seek recovery. Furthermore, it can be expanded to multi-label classification for various mental diseases and used as a simple self-mental disease diagnosis tool.

Hashimoto’s thyroiditis (HT) is a common autoimmune disease, with its prevalence rapidly increasing. Both genetic and environmental risk factors contribute to the development of HT. Recently, viral infection has been suggested to act as a trigger of HT by eliciting the host immune response and subsequent autoreactivity. We analyzed features of HT through bioinformatics analysis so as to identify markers of HT development. We accessed public microarray data of HT patients from the Gene Expression Omnibus (GEO) and obtained differentially expressed genes (DEGs) under HT. Gene Ontology (GO) and KEGG pathway enrichment analyses were performed for functional clustering of our protein-protein interaction (PPI) network. Utilizing ranked gene lists, we performed Gene Set Enrichment Analysis (GSEA) using the clusterprofiler R package. By comparing the expression signatures of the huge perturbation database with the queried rank-ordered gene list, connectivity map (CMap) analysis was performed to screen potential therapeutic targets and agents. The gene expression profile of the HT group was in line with general characteristics of HT. Biological processes related to the immune response and viral infection pathways were obtained for the upregulated DEGs. GSEA results revealed activation of autoimmune disease-related pathways and several viral infection pathways. Autoimmune disease and viral infection pathways were highly interconnected by common genes, while the HLA genes which are shared by both were significantly upregulated. CMap analysis suggested that perturbagens, including SRRM1, NLK, and CCDC92, have the potential to reverse the HT expression profile. Several lines of evidence suggested that viral infection and the host immune response are activated during HT. Viral infection is suspected to act as a key trigger of HT by causing autoimmunity. SRRM1, an alternative splicing factor, which responds to viral activity, might serve as potential marker of HT.